summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/docg4.c
Commit message (Collapse)AuthorAgeFilesLines
* mtd: nand: move raw NAND related code to the raw/ subdirBoris Brezillon2018-02-161-1421/+0Star
| | | | | | | | As part of the process of sharing more code between different NAND based devices, we need to move all raw NAND related code to the raw/ subdirectory. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: nand: force drivers to explicitly send READ/PROG commandsBoris Brezillon2017-12-141-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The core currently send the READ0 and SEQIN+PAGEPROG commands in nand_do_read/write_ops(). This is inconsistent with ->read/write_oob[_raw]() hooks behavior which are expected to send these commands. There's already a flag (NAND_ECC_CUSTOM_PAGE_ACCESS) to inform the core that a specific controller wants to send the READ/SEQIN+PAGEPROG commands on its own, but it's an opt-in flag, and existing drivers are unlikely to be updated to pass it. Moreover, some controllers cannot dissociate the READ/PAGEPROG commands from the associated data transfer and ECC engine activation, and developers have to hack things in their ->cmdfunc() implementation to handle such complex cases, or have to accept the perf penalty of sending twice the same command. To address this problem we are planning on adding a new interface which is passed all information about a NAND operation (including the amount of data to transfer) and replacing all calls to ->cmdfunc() to calls to this new ->exec_op() hook. But, in order to do that, we need to have all ->cmdfunc() calls placed near their associated ->read/write_buf/byte() calls. Modify the core and relevant drivers to make NAND_ECC_CUSTOM_PAGE_ACCESS the default case, and remove this flag. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [miquel.raynal@free-electrons.com: tested, fixed and rebased on nand/next] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* mtd: nand: provide several helpers to do common NAND operationsBoris Brezillon2017-12-141-1/+1
| | | | | | | | | | | | | | | This is part of the process of removing direct calls to ->cmdfunc() outside of the core in order to introduce a better interface to execute NAND operations. Here we provide several helpers and make use of them to remove all direct calls to ->cmdfunc(). This way, we can easily modify those helpers to make use of the new ->exec_op() interface when available. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [miquel.raynal@free-electrons.com: rebased and fixed some conflicts] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* mtd: nand: use usual return values for the ->erase() hookMiquel Raynal2017-12-011-1/+6
| | | | | | | | | | Avoid using specific defined values for checking returned status of the ->erase() hook. Instead, use usual negative error values on failure, zero otherwise. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* mtd: nand: Rename nand.h into rawnand.hBoris Brezillon2017-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Peter Pan <peterpandong@micron.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Han Xu <han.xu@nxp.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
* mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPPBoris Brezillon2017-05-301-0/+2
| | | | | | | | | | | | | | | | A lot of drivers are providing their own ->cmdfunc(), and most of the time this implementation does not support all possible NAND operations. But since ->cmdfunc() cannot return an error code, the core has no way to know that the operation it requested is not supported. This is a problem we cannot address for all kind of operations with the current design, but we can prevent these silent failures for the GET/SET FEATURES operation by overloading the default ->onfi_{set,get}_features() methods with one returning -ENOTSUPP. Reported-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
* mtd: nand: import nand_hw_control_init()Marc Gonzalez2016-09-231-2/+1Star
| | | | | | | | The code to initialize a struct nand_hw_control is duplicated across several drivers. Factorize it using an inline function. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* mtd: nand: docg4: switch to mtd_ooblayout_opsBoris Brezillon2016-05-051-5/+28
| | | | | | | Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* mtd: nand: don't select chip in nand_chip's block_bad opArchit Taneja2016-03-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | One of the arguments passed to struct nand_chip's block_bad op is 'getchip', which, if true, is supposed to get and select the nand device, and later unselect and release the device. This op is intended to be replaceable by drivers. The drivers shouldn't be responsible for selecting/unselecting chip. Like other ops, the chip should already be selected before the block_bad op is called. Remove the getchip argument from the block_bad op and nand_block_checkbad. Move the chip selection to nand_block_isbad, since it is the only caller to nand_block_checkbad which requires chip selection. Modify nand_block_bad (the default function for the op) such that it doesn't select the chip. Remove the getchip argument from the bad_block funcs in cafe_nand, diskonchip and docg4 drivers. Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: kill the ecclayout->oobavail fieldBoris BREZILLON2016-03-081-1/+0Star
| | | | | | | | | | ecclayout->oobavail is just redundant with the mtd->oobavail field. Moreover, it prevents static const definition of ecc layouts since the NAND framework is calculating this value based on the ecclayout->oobfree field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: make use of nand_set/get_controller_data() helpersBoris BREZILLON2016-01-071-20/+20
| | | | | | | | | New helpers have been added to avoid directly accessing chip->field. Use them where appropriate. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: fixed a few rebase conflicts] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: remove useless mtd->priv = chip assignmentsBoris BREZILLON2015-12-181-1/+0Star
| | | | | | | | | mtd_to_nand() now uses the container_of() approach to transform an mtd_info pointer into a nand_chip one. Drop useless mtd->priv assignments from NAND controller drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: docg4: simplify error caseBrian Norris2015-12-181-8/+4Star
| | | | | | | | | | Other refactorings have left the 'fail' label much simpler, so it shouldn't have to handle the failed allocation case. This also fixes a -Wshadow warning. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* mtd: nand: docg4: use the mtd instance embedded in struct nand_chipBoris BREZILLON2015-12-181-11/+12
| | | | | | | struct nand_chip now embeds an mtd device. Make use of this mtd instance. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: make use of mtd_to_nand() in NAND driversBoris BREZILLON2015-12-081-17/+17
| | | | | | | | mtd_to_nand() was recently introduced to avoid direct accesses to the mtd->priv field. Update all NAND drivers to use it. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: pass page number to ecc->write_xxx() methodsBoris BREZILLON2015-10-131-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The ->read_xxx() methods are all passed the page number the NAND controller is supposed to read, but ->write_xxx() do not have such a parameter. This is a problem if we want to properly implement data scrambling/randomization in order to mitigate MLC sensibility to repeated pattern: to prevent bitflips in adjacent pages in the same block we need to avoid repeating the same pattern at the same offset in those pages, hence the randomizer/scrambler engine need to be passed the page value in order to adapt its seed accordingly. Moreover, adding the page parameter to the ->write_xxx() methods add some consistency to the current API. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Josh Wu <josh.wu@atmel.com> CC: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> CC: Maxime Ripard <maxime.ripard@free-electrons.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Huang Shijie <shijie.huang@arm.com> CC: Stefan Agner <stefan@agner.ch> CC: devel@driverdev.osuosl.org CC: linux-arm-kernel@lists.infradead.org CC: linux-kernel@vger.kernel.org Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: docg4: show parent device in sysfsFrans Klaver2015-10-131-1/+1
| | | | | | | | | Fix a bug where parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* mtd: nand: drop owner assignment from platform_driversWolfram Sang2014-10-201-1/+0Star
| | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* mtd: nand: refactor erase_cmd() to return chip statusBrian Norris2014-05-091-2/+4
| | | | | | | | | | | | | | | | | | | | | | | The nand_chip::erase_cmd callback previously served a dual purpose; for one, it allowed a per-flash-chip override, so that AG-AND devices could use a different erase command than other NAND. These AND devices were dropped in commit 14c6578683367b1e7af0c3c09e872b45a45183a7 (mtd: nand: remove AG-AND support). On the other hand, some drivers (denali and doc-g4) need to use this sort of callback to implement controller-specific erase operations. To make the latter operation easier for some drivers (e.g., ST's new BCH NAND driver), it helps if the command dispatch and wait functions can be lumped together, rather than called separately. This patch does two things: 1. Pull the call to chip->waitfunc() into chip->erase_cmd(), and return the status from this callback 2. Rename erase_cmd() to just erase(), since this callback does a little more than just send a command Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Lee Jones <lee.jones@linaro.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-11-161-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
| * treewide: Fix typo in printkMasanari Iida2013-10-141-1/+1
| | | | | | | | | | | | | | | | Correct spelling typo within various part of the kernel Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | mtd: docg4: fix status polling loopMike Dunn2013-11-071-9/+6Star
| | | | | | | | | | | | | | | | | | | | | | The loop that polls the status register waiting for an operation to complete foolishly bases the timeout simply on the number of loop iterations that have ocurred. When I increased the processor clock speed, timeouts started to appear for long block erasure operations. This patch measures the timeout using jiffies. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | nand: docg4: use nand_base's default BBT scanBrian Norris2013-10-281-1/+0Star
| | | | | | | | | | | | | | | | | | There's no point in the low level driver doing the work that nand_base already is doing; just let nand_base set the default BBT scanning function. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Dunn <mikedunn@newsguy.com>
* | mtd: nand: refactor chip->block_markbad interfaceBrian Norris2013-08-301-6/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The chip->block_markbad pointer should really only be responsible for writing a bad block marker for new bad blocks. It should not take care of BBT-related functionality, nor should it handle bookkeeping of bad block stats. This patch refactors the 3 users of the block_markbad interface (plus the default nand_base implementation) so that the common code is kept in nand_block_markbad_lowlevel(). It removes some inconsistencies between the various implementations and should allow for more centralized improvements in the future. Because gpmi-nand no longer needs the nand_update_bbt() function, let's stop exporting it as well. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com> (for gpmi-nand parts) Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | mtd: nand: docg4: remove unnecessary platform_set_drvdata()Jingoo Han2013-08-051-2/+0Star
|/ | | | | | | | | | | | The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: doc: use module_platform_driver_probe()Jingoo Han2013-04-051-12/+1Star
| | | | | | | | | This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand/docg4: fix and improve read of factory bbtMike Dunn2012-12-121-5/+19
| | | | | | | | | | | | | This patch does two things related to reading the factory badblock table during initialization: (1) fix error where a non-zero return code from docg4_read_page() is assumed to be an error (it was later changed to be max_bitflips; thanks to Brian Norris for bringing this to my attention a while back), and (2) if there is an error reading the factory bbt, it tries reading another (redundant) factory bbt table. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: nand/docg4: reserve bb marker area in ecclayoutMike Dunn2012-12-121-4/+6
| | | | | | | | | Modify the nand_ecclayout to place the two bb marker bytes in the oob region off-limits to the user. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: nand/docg4: add support for writing in reliable modeMike Dunn2012-12-121-0/+39
| | | | | | | | | | | | | | The controller on the docg4 has a "reliable" mode, where consecutive 2k pages are used in parallel. The initial program loader (IPL) on my Treo 680 expects the secondary program loader (SPL) to be written in this mode. This patch adds support for writing data in reliable mode, by way of a module parameter. Support for reading in this mode (as the IPL does) is not supported yet, but alternate (even-numbered) 2k pages written in reliable mode can be read normally (odd-numbered pages will contain junk and generate ecc errors). Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: docg4: ecc.read_page() returns 0 on uncorrectable errorsMike Dunn2012-09-291-0/+2
| | | | | | | | | | | | Currently the docg4's ecc.read_page() method returns -EBADMSG when uncorrectable bitflips occur. This is wrong; 0 should be returned in this case. An error code should only be returned by this method in the case of a hardware error (probably -EIO). Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg4: fix oob readsMike Dunn2012-09-291-27/+6Star
| | | | | | | | | | | | | | | | | | This patch does two closely related things: (1) Currently the ecc.read_page() method does not fill the nand->oob_poi buffer with the oob data, but instead reads oob into a local buffer. Fix this by filling the oob_poi buffer instead of a local buffer. The 'oob_required' argument is quietly ignored; the device must always read oob after the page data, and it is presumed that there's no harm in filling oob_poi, even when not explicitly requested. (2) Always read oob from the device in ecc.read_oob(), instead of copying it from a local buffer under some circumstances. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: teach write_page and write_page_raw return an error codeJosh Wu2012-07-061-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | There is an implemention of hardware ECC write page function which may return an error indication. For instance, using Atmel HW PMECC to write one page into a nand flash, the hardware engine will compute the BCH ecc code for this page. so we need read a the status register to theck whether the ecc code is generated. But we cannot assume the status register always can be ready, for example, incorrect hardware configuration or hardware issue, in such case we need write_page() to return a error code. Since the definition of 'write_page' function in struct nand_ecc_ctrl is 'void'. So this patch will: 1. add return 'int' value for 'write_page' function. 2. to be consitent, add return 'int' value for 'write_page_raw' fuctions too. 3. add code to test the return value, and if negative, indicate an error happend when write page with ECC. 4. fix the compile warning in all impacted nand flash driver. Note: I couldn't compile-test all of these easily, as some had ARCH dependencies. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'Shmulik Ladkani2012-05-141-1/+1
| | | | | | | | | | | | | | As of [mtd: nand: remove autoincrement 'sndcmd' code], the NAND_CMD_READ0 command is issued unconditionally. Thus, read_oob/read_oob_raw's 'sndcmd' argument is no longer needed, as well as their return code. Remove the 'sndcmd' parameter, and set the return code to 0. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add 'oob_required' argument to NAND {read,write}_page interfacesBrian Norris2012-05-141-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New NAND controllers can perform read/write via HW engines which don't expose OOB data in their DMA mode. To reflect this, we should rework the nand_chip / nand_ecc_ctrl interfaces that assume that drivers will always read/write OOB data in the nand_chip.oob_poi buffer. A better interface includes a boolean argument that explicitly tells the callee when OOB data is requested by the calling layer (for reading/writing to/from nand_chip.oob_poi). This patch adds the 'oob_required' parameter to each relevant {read,write}_page interface; all 'oob_required' parameters are left unused for now. The next patch will set the parameter properly in the nand_base.c callers, and follow-up patches will make use of 'oob_required' in some of the callee functions. Note that currently, there is no harm in ignoring the 'oob_required' parameter and *always* utilizing nand_chip.oob_poi, but there can be performance/complexity/design benefits from avoiding filling oob_poi in the common case. I will try to implement this for some drivers which can be ported easily. Note: I couldn't compile-test all of these easily, as some had ARCH dependencies. [dwmw2: Merge later 1/0 vs. true/false cleanup] Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Jiandong Zheng <jdzheng@broadcom.com> Acked-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: kill NAND_NO_AUTOINCR optionBrian Norris2012-05-141-2/+1Star
| | | | | | | | No drivers use auto-increment NAND, so kill the NO_AUTOINCR option entirely. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: read_page() returns max_bitflipsMike Dunn2012-05-141-2/+3
| | | | | | | | | | | | | | | The ecc.read_page() method for nand drivers is changed to return the maximum number of bitflips that were corrected on any one region covering an ecc step, This patch doesn't change what the nand code returns to mtd. This v2 includes the change to the fsl_ifc_nand driver requested by Scott¹. ¹ http://lists.infradead.org/pipermail/linux-mtd/2012-April/040883.html Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by (freescale changes): Scott Wood <scottwood@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: flash drivers set ecc strengthMike Dunn2012-03-271-0/+1
| | | | | | | | | | | | | | | | | Flash device drivers initialize 'ecc_strength' in struct mtd_info, which is the maximum number of bit errors that can be corrected in one writesize region. Drivers using the nand interface intitialize 'strength' in struct nand_ecc_ctrl, which is the maximum number of bit errors that can be corrected in one ecc step. Nand infrastructure code translates this to 'ecc_strength'. Also for nand drivers, the nand infrastructure code sets ecc.strength for ecc modes NAND_ECC_SOFT, NAND_ECC_SOFT_BCH, and NAND_ECC_NONE. It is set in the driver for all other modes. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: docg4: fix printk() warningsDan Carpenter2012-03-271-3/+1Star
| | | | | | | | | | | | | | | Gcc complains here: drivers/mtd/nand/docg4.c: In function ‘probe_docg4’: drivers/mtd/nand/docg4.c:1277:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 3 has type ‘resource_size_t’ [-Wformat] drivers/mtd/nand/docg4.c:1277:4: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 4 has type ‘resource_size_t’ [-Wformat] We have a standard way of printing these using a format string extension. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add support for diskonchip G4 nand flash deviceMike Dunn2012-03-271-0/+1378
This patch adds a driver for the M-Sys / Sandisk diskonchip G4 nand flash found in various smartphones and PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba Portege G900, Asus P526, and O2 XDA Zinc. It was tested on the Treo 680, but should work generically. Since v3, this patch adds power management functions, a scan of the factory bad block table during initialization, several fixes, and more extensive testing. Also, the platform data header file, which only contained partitioning information, was removed. Command-line partitioning can be used, at least until an mtd parser is written for the saftl format with which these chips are shipped. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-07-24 00:55:47 +0200