po: merge changes

Signed-off-by: Karel Zak <kzak@redhat.com>

1 files changed, 120 insertions, 115 deletions

diff --git a/po/zh_TW.po b/po/zh_TW.po
index 22d06418c..8879473e8 100644
--- a/po/zh_TW.po
+++ b/po/zh_TW.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: util-linux-ng 2.18-rc2\n"
 "Report-Msgid-Bugs-To: util-linux@vger.kernel.org\n"
-"POT-Creation-Date: 2011-08-17 00:37+0200\n"
+"POT-Creation-Date: 2011-08-29 12:13+0200\n"
 "PO-Revision-Date: 2010-08-22 00:14+0800\n"
 "Last-Translator: Wei-Lun Chao <chaoweilun@gmail.com>\n"
 "Language-Team: Chinese (traditional) <zh-l10n@linux.org.tw>\n"
@@ -248,7 +248,7 @@ msgid ""
 msgstr ""
 
 #: disk-utils/fdformat.c:129 disk-utils/mkfs.bfs.c:88
-#: disk-utils/mkfs.cramfs.c:767 disk-utils/mkswap.c:498 fdisk/sfdisk.c:2616
+#: disk-utils/mkfs.cramfs.c:767 disk-utils/mkswap.c:498 fdisk/sfdisk.c:2614
 #: fsck/fsck.c:1414 getopt/getopt.c:430 hwclock/hwclock.c:1354
 #: misc-utils/cal.c:351 misc-utils/kill.c:195 misc-utils/logger.c:234
 #: misc-utils/look.c:124 misc-utils/mcookie.c:116 misc-utils/namei.c:458
@@ -541,7 +541,7 @@ msgstr "無效的檔案資料偏移值"
 msgid "compiled without -x support"
 msgstr "編譯時不具 -x 支援"
 
-#: disk-utils/fsck.cramfs.c:676 fdisk/sfdisk.c:2842
+#: disk-utils/fsck.cramfs.c:676 fdisk/sfdisk.c:2840
 #, c-format
 msgid "%s: OK\n"
 msgstr "%s：確定\n"
@@ -4014,7 +4014,7 @@ msgstr "磁碟 %s 不包含有效的分割表\n"
 msgid "Cannot open %s\n"
 msgstr "無法開啟 %s\n"
 
-#: fdisk/fdisk.c:2920 fdisk/sfdisk.c:2715
+#: fdisk/fdisk.c:2920 fdisk/sfdisk.c:2713
 #, c-format
 msgid "cannot open %s\n"
 msgstr "無法開啟 %s\n"
@@ -5420,12 +5420,12 @@ msgstr ""
 msgid "Warning: partition %s does not start at a cylinder boundary\n"
 msgstr "警告：分割區 %s 並非啟始於磁柱邊界\n"
 
-#: fdisk/sfdisk.c:1320
+#: fdisk/sfdisk.c:1319
 #, c-format
 msgid "Warning: partition %s does not end at a cylinder boundary\n"
 msgstr "警告：分割區 %s 並非結束於磁柱邊界\n"
 
-#: fdisk/sfdisk.c:1339
+#: fdisk/sfdisk.c:1337
 msgid ""
 "Warning: more than one primary partition is marked bootable (active)\n"
 "This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
@@ -5433,7 +5433,7 @@ msgstr ""
 "警告：超過一個的主要分割區被標記為可開機的 (作用中)\n"
 "這個對 LILO 而言不成問題，但是 DOS MBR 將無法以這個磁碟開機。\n"
 
-#: fdisk/sfdisk.c:1346
+#: fdisk/sfdisk.c:1344
 msgid ""
 "Warning: usually one can boot from primary partitions only\n"
 "LILO disregards the `bootable' flag.\n"
@@ -5441,7 +5441,7 @@ msgstr ""
 "警告：通常只可以從主要分割區開機\n"
 "LILO 並不理會「可開機的」旗標。\n"
 
-#: fdisk/sfdisk.c:1352
+#: fdisk/sfdisk.c:1350
 msgid ""
 "Warning: no primary partition is marked bootable (active)\n"
 "This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
@@ -5449,32 +5449,32 @@ msgstr ""
 "警告：沒有主要分割區被標記為可開機的 (作用中)\n"
 "這個對 LILO 而言不成問題，但是 DOS MBR 將無法以這個磁碟開機。\n"
 
-#: fdisk/sfdisk.c:1366
+#: fdisk/sfdisk.c:1364
 msgid "start"
 msgstr "啟始"
 
-#: fdisk/sfdisk.c:1369
+#: fdisk/sfdisk.c:1367
 #, c-format
 msgid ""
 "partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
 msgstr ""
 "分割區 %s：啟始：(c,h,s) 預期為 (%ld ,%ld ,%ld) 但找到 (%ld ,%ld ,%ld)\n"
 
-#: fdisk/sfdisk.c:1375
+#: fdisk/sfdisk.c:1373
 msgid "end"
 msgstr "結束"
 
-#: fdisk/sfdisk.c:1378
+#: fdisk/sfdisk.c:1376
 #, c-format
 msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
 msgstr "分割區 %s：結束：(c,h,s) 預期為 (%ld ,%ld ,%ld) 找到 (%ld ,%ld ,%ld)\n"
 
-#: fdisk/sfdisk.c:1381
+#: fdisk/sfdisk.c:1379
 #, c-format
 msgid "partition %s ends on cylinder %ld, beyond the end of the disk\n"
 msgstr "分割區 %s 結束於磁柱 %ld，位於磁碟的末端之後\n"
 
-#: fdisk/sfdisk.c:1406
+#: fdisk/sfdisk.c:1404
 #, c-format
 msgid ""
 "Warning: shifted start of the extd partition from %ld to %ld\n"
@@ -5483,7 +5483,7 @@ msgstr ""
 "警告：擴充分割區的啟始從 %ld 位移到 %ld\n"
 "(只用於列表目的。請不要變更它的內容。)\n"
 
-#: fdisk/sfdisk.c:1411
+#: fdisk/sfdisk.c:1409
 msgid ""
 "Warning: extended partition does not start at a cylinder boundary.\n"
 "DOS and Linux will interpret the contents differently.\n"
@@ -5491,131 +5491,131 @@ msgstr ""
 "警告：擴充分割區非啟始於磁柱邊界。\n"
 "DOS 和 Linux 將對內容有不同解譯。\n"
 
-#: fdisk/sfdisk.c:1429 fdisk/sfdisk.c:1506
+#: fdisk/sfdisk.c:1427 fdisk/sfdisk.c:1504
 #, c-format
 msgid "too many partitions - ignoring those past nr (%d)\n"
 msgstr "太多分割區 - 忽略那些過去的 nr (%d)\n"
 
-#: fdisk/sfdisk.c:1444
+#: fdisk/sfdisk.c:1442
 msgid "tree of partitions?\n"
 msgstr "分割區的樹狀圖？\n"
 
-#: fdisk/sfdisk.c:1552
+#: fdisk/sfdisk.c:1550
 msgid "detected Disk Manager - unable to handle that\n"
 msgstr "偵測到磁碟管理員 - 無法處理它\n"
 
-#: fdisk/sfdisk.c:1560
+#: fdisk/sfdisk.c:1558
 msgid "DM6 signature found - giving up\n"
 msgstr "找到 DM6 簽章 - 放棄\n"
 
-#: fdisk/sfdisk.c:1580
+#: fdisk/sfdisk.c:1578
 msgid "strange..., an extended partition of size 0?\n"
 msgstr "很奇怪…，大小為 0 的擴充分割區？\n"
 
-#: fdisk/sfdisk.c:1587 fdisk/sfdisk.c:1598
+#: fdisk/sfdisk.c:1585 fdisk/sfdisk.c:1596
 msgid "strange..., a BSD partition of size 0?\n"
 msgstr "很奇怪…，大小為 0 的 BSD 分割區？\n"
 
-#: fdisk/sfdisk.c:1641
+#: fdisk/sfdisk.c:1639
 #, c-format
 msgid " %s: unrecognized partition table type\n"
 msgstr " %s: 無法辨識的分割表類型\n"
 
-#: fdisk/sfdisk.c:1653
+#: fdisk/sfdisk.c:1651
 msgid "-n flag was given: Nothing changed\n"
 msgstr "-n 旗標已給定：沒有改變任何東西\n"
 
-#: fdisk/sfdisk.c:1670
+#: fdisk/sfdisk.c:1668
 msgid "Failed saving the old sectors - aborting\n"
 msgstr "儲存舊的磁區時失敗 - 放棄\n"
 
-#: fdisk/sfdisk.c:1675 fdisk/sfdisk.c:1680
+#: fdisk/sfdisk.c:1673 fdisk/sfdisk.c:1678
 #, c-format
 msgid "Failed writing the partition on %s\n"
 msgstr "寫入分割區於 %s 時失敗\n"
 
-#: fdisk/sfdisk.c:1758
+#: fdisk/sfdisk.c:1756
 msgid "long or incomplete input line - quitting\n"
 msgstr "太長或不完整的輸入列 - 離開\n"
 
-#: fdisk/sfdisk.c:1794
+#: fdisk/sfdisk.c:1792
 #, c-format
 msgid "input error: `=' expected after %s field\n"
 msgstr "輸入錯誤：預期「=」位於 %s 欄位之後\n"
 
-#: fdisk/sfdisk.c:1801
+#: fdisk/sfdisk.c:1799
 #, c-format
 msgid "input error: unexpected character %c after %s field\n"
 msgstr "輸入錯誤：未預期的字元 %c 位於 %s 欄位之後\n"
 
-#: fdisk/sfdisk.c:1807
+#: fdisk/sfdisk.c:1805
 #, c-format
 msgid "unrecognized input: %s\n"
 msgstr "無法辨識的輸入：%s\n"
 
-#: fdisk/sfdisk.c:1848
+#: fdisk/sfdisk.c:1846
 msgid "number too big\n"
 msgstr "數字太大\n"
 
-#: fdisk/sfdisk.c:1852
+#: fdisk/sfdisk.c:1850
 msgid "trailing junk after number\n"
 msgstr "數字之後尾隨無用物\n"
 
-#: fdisk/sfdisk.c:1976
+#: fdisk/sfdisk.c:1974
 msgid "no room for partition descriptor\n"
 msgstr "沒有空間可用於分割區描述\n"
 
-#: fdisk/sfdisk.c:2009
+#: fdisk/sfdisk.c:2007
 msgid "cannot build surrounding extended partition\n"
 msgstr "無法圍繞擴充分割區建立\n"
 
-#: fdisk/sfdisk.c:2060
+#: fdisk/sfdisk.c:2058
 msgid "too many input fields\n"
 msgstr "太多輸入欄位\n"
 
-#: fdisk/sfdisk.c:2094
+#: fdisk/sfdisk.c:2092
 msgid "No room for more\n"
 msgstr "沒有空間可容納更多\n"
 
-#: fdisk/sfdisk.c:2113
+#: fdisk/sfdisk.c:2111
 msgid "Illegal type\n"
 msgstr "不合法的類型\n"
 
-#: fdisk/sfdisk.c:2147
+#: fdisk/sfdisk.c:2145
 #, c-format
 msgid "Warning: given size (%lu) exceeds max allowable size (%lu)\n"
 msgstr "警告：給定的大小 (%lu) 超出所允許的最大值 (%lu)\n"
 
-#: fdisk/sfdisk.c:2153
+#: fdisk/sfdisk.c:2151
 msgid "Warning: empty partition\n"
 msgstr "警告：空的分割區\n"
 
-#: fdisk/sfdisk.c:2167
+#: fdisk/sfdisk.c:2165
 #, c-format
 msgid "Warning: bad partition start (earliest %lu)\n"
 msgstr "警告：不當的分割區啟始 (最先 %lu)\n"
 
-#: fdisk/sfdisk.c:2180
+#: fdisk/sfdisk.c:2178
 msgid "unrecognized bootable flag - choose - or *\n"
 msgstr "無法辨識的可開機旗標 - 選擇 - 或 *\n"
 
-#: fdisk/sfdisk.c:2197 fdisk/sfdisk.c:2211
+#: fdisk/sfdisk.c:2195 fdisk/sfdisk.c:2209
 msgid "partial c,h,s specification?\n"
 msgstr "部份 c,h,s 規格？\n"
 
-#: fdisk/sfdisk.c:2222
+#: fdisk/sfdisk.c:2220
 msgid "Extended partition not where expected\n"
 msgstr "擴充分割區不在預期的位置\n"
 
-#: fdisk/sfdisk.c:2254
+#: fdisk/sfdisk.c:2252
 msgid "bad input\n"
 msgstr "不當的輸入\n"
 
-#: fdisk/sfdisk.c:2277
+#: fdisk/sfdisk.c:2275
 msgid "too many partitions\n"
 msgstr "太多分割區\n"
 
-#: fdisk/sfdisk.c:2310
+#: fdisk/sfdisk.c:2308
 msgid ""
 "Input in the following format; absent fields get a default value.\n"
 "<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n"
@@ -5625,7 +5625,7 @@ msgstr ""
 "<啟始> <大小> <類型 [E,S,L,X, 十六進位]> <可開機 [-,*]> <c,h,s> <c,h,s>\n"
 "常常您只有需要指定 <啟始> 和 <大小> (也許還有 <類型>)。\n"
 
-#: fdisk/sfdisk.c:2330 getopt/getopt.c:314 hwclock/hwclock.c:1374
+#: fdisk/sfdisk.c:2328 getopt/getopt.c:314 hwclock/hwclock.c:1374
 #: misc-utils/cal.c:786 misc-utils/logger.c:138 misc-utils/look.c:366
 #: misc-utils/mcookie.c:66 misc-utils/namei.c:411 misc-utils/rename.c:64
 #: misc-utils/uuidd.c:54 misc-utils/uuidgen.c:33 misc-utils/whereis.c:132
@@ -5643,12 +5643,12 @@ msgid ""
 "Usage:\n"
 msgstr "用法:\n"
 
-#: fdisk/sfdisk.c:2332
+#: fdisk/sfdisk.c:2330
 #, fuzzy, c-format
 msgid " %s [options] <device> [...]\n"
 msgstr "用法：%s [選項] 裝置…\n"
 
-#: fdisk/sfdisk.c:2334 getopt/getopt.c:322 hwclock/hwclock.c:1394
+#: fdisk/sfdisk.c:2332 getopt/getopt.c:322 hwclock/hwclock.c:1394
 #: misc-utils/cal.c:791 misc-utils/logger.c:142 misc-utils/look.c:370
 #: misc-utils/mcookie.c:70 misc-utils/namei.c:415 misc-utils/rename.c:69
 #: misc-utils/uuidd.c:58 misc-utils/uuidgen.c:37 misc-utils/whereis.c:136
@@ -5668,7 +5668,7 @@ msgstr ""
 "\n"
 "選項：\n"
 
-#: fdisk/sfdisk.c:2335
+#: fdisk/sfdisk.c:2333
 msgid ""
 " -s, --show-size           list size of a partition\n"
 " -c, --id                  change or print partition Id\n"
@@ -5676,7 +5676,7 @@ msgid ""
 "     --print-id            print Id\n"
 msgstr ""
 
-#: fdisk/sfdisk.c:2339
+#: fdisk/sfdisk.c:2337
 msgid ""
 " -l, --list                list partitions of each device\n"
 " -d, --dump                idem, but in a format suitable for later input\n"
@@ -5686,7 +5686,7 @@ msgid ""
 "(MB)\n"
 msgstr ""
 
-#: fdisk/sfdisk.c:2344
+#: fdisk/sfdisk.c:2342
 msgid ""
 " -1, --one-only            reserved option that does nothing currently\n"
 " -T, --list-types          list the known partition types\n"
@@ -5695,7 +5695,7 @@ msgid ""
 " -R, --re-read             make the kernel reread the partition table\n"
 msgstr ""
 
-#: fdisk/sfdisk.c:2349
+#: fdisk/sfdisk.c:2347
 msgid ""
 " -N <number>               change only the partition with this <number>\n"
 " -n                        do not actually write to disk\n"
@@ -5704,21 +5704,21 @@ msgid ""
 " -I <file>                 restore sectors from <file>\n"
 msgstr ""
 
-#: fdisk/sfdisk.c:2353
+#: fdisk/sfdisk.c:2351
 msgid ""
 " -V, --verify              check that the listed partitions are reasonable\n"
 " -v, --version             display version information and exit\n"
 " -h, --help                display this help text and exit\n"
 msgstr ""
 
-#: fdisk/sfdisk.c:2357
+#: fdisk/sfdisk.c:2355
 #, fuzzy
 msgid ""
 "\n"
 "Dangerous options:\n"
 msgstr "危險選項："
 
-#: fdisk/sfdisk.c:2358
+#: fdisk/sfdisk.c:2356
 msgid ""
 " -f, --force               disable all consistency checking\n"
 "     --no-reread           do not check whether the partition is in use\n"
@@ -5727,14 +5727,14 @@ msgid ""
 "Linux\n"
 msgstr ""
 
-#: fdisk/sfdisk.c:2362
+#: fdisk/sfdisk.c:2360
 #, fuzzy
 msgid ""
 " -g, --show-geometry       print the kernel's idea of the geometry\n"
 " -G, --show-pt-geometry    print geometry guessed from the partition table\n"
 msgstr "    -G [或 --show-pt-geometry]：印出根據分割表所猜測的硬碟結構參數"
 
-#: fdisk/sfdisk.c:2364
+#: fdisk/sfdisk.c:2362
 #, fuzzy
 msgid ""
 " -A, --activate[=<device>] activate bootable flag\n"
@@ -5745,13 +5745,13 @@ msgstr ""
 "    -x [或 --show-extended]：於輸出時也列出擴充分割區\n"
 "                            或預期輸入時有對於它們的描述"
 
-#: fdisk/sfdisk.c:2368
+#: fdisk/sfdisk.c:2366
 msgid ""
 "     --leave-last          do not allocate the last cylinder\n"
 "     --IBM                 same as --leave-last\n"
 msgstr ""
 
-#: fdisk/sfdisk.c:2370
+#: fdisk/sfdisk.c:2368
 msgid ""
 "     --in-order            partitions are in order\n"
 "     --not-in-order        partitions are not in order\n"
@@ -5759,7 +5759,7 @@ msgid ""
 "     --not-inside-outer    not all logicals inside outermost extended\n"
 msgstr ""
 
-#: fdisk/sfdisk.c:2374
+#: fdisk/sfdisk.c:2372
 msgid ""
 "     --nested              every partition is disjoint from all others\n"
 "     --chained             like nested, but extended partitions may lie "
@@ -5767,7 +5767,7 @@ msgid ""
 "     --onesector           partitions are mutually disjoint\n"
 msgstr ""
 
-#: fdisk/sfdisk.c:2378
+#: fdisk/sfdisk.c:2376
 msgid ""
 "\n"
 "Override the detected geometry using:\n"
@@ -5777,26 +5777,26 @@ msgid ""
 "\n"
 msgstr ""
 
-#: fdisk/sfdisk.c:2388
+#: fdisk/sfdisk.c:2386
 msgid "Usage:"
 msgstr "用法："
 
-#: fdisk/sfdisk.c:2389
+#: fdisk/sfdisk.c:2387
 #, c-format
 msgid "%s device\t\t list active partitions on device\n"
 msgstr "%s 裝置\t\t 列出裝置上的作用中分割區\n"
 
-#: fdisk/sfdisk.c:2390
+#: fdisk/sfdisk.c:2388
 #, c-format
 msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n"
 msgstr "%s 裝置 n1 n2…啟用分割區 n1..., 停用其餘的\n"
 
-#: fdisk/sfdisk.c:2392
+#: fdisk/sfdisk.c:2390
 #, c-format
 msgid "%s -An device\t activate partition n, inactivate the other ones\n"
 msgstr "%s -An 裝置\t 啟用分割區 n, 停用另外一個\n"
 
-#: fdisk/sfdisk.c:2521
+#: fdisk/sfdisk.c:2519
 #, c-format
 msgid ""
 "\n"
@@ -5809,62 +5809,62 @@ msgstr ""
 "Parted。\n"
 "\n"
 
-#: fdisk/sfdisk.c:2526
+#: fdisk/sfdisk.c:2524
 #, c-format
 msgid "Use the --force flag to overrule this check.\n"
 msgstr "使用 --force 旗標以駁回這個檢查。\n"
 
-#: fdisk/sfdisk.c:2565
+#: fdisk/sfdisk.c:2563
 msgid "no command?\n"
 msgstr "沒有命令？\n"
 
-#: fdisk/sfdisk.c:2735
+#: fdisk/sfdisk.c:2733
 #, c-format
 msgid "total: %llu blocks\n"
 msgstr "總計：%llu 區塊\n"
 
-#: fdisk/sfdisk.c:2778
+#: fdisk/sfdisk.c:2776
 msgid "usage: sfdisk --print-id device partition-number\n"
 msgstr "用法：sfdisk --print-id 裝置 分割區編號\n"
 
-#: fdisk/sfdisk.c:2780
+#: fdisk/sfdisk.c:2778
 msgid "usage: sfdisk --change-id device partition-number Id\n"
 msgstr "用法：sfdisk --change-id 裝置 分割區編號 識別號\n"
 
-#: fdisk/sfdisk.c:2782
+#: fdisk/sfdisk.c:2780
 msgid "usage: sfdisk --id device partition-number [Id]\n"
 msgstr "用法：sfdisk --id 裝置 分割區編號 [識別號]\n"
 
-#: fdisk/sfdisk.c:2789
+#: fdisk/sfdisk.c:2787
 msgid "can specify only one device (except with -l or -s)\n"
 msgstr "只可以指定一個裝置 (除了配合 -l 或 -s)\n"
 
-#: fdisk/sfdisk.c:2815
+#: fdisk/sfdisk.c:2813
 #, c-format
 msgid "cannot open %s read-write\n"
 msgstr "無法開啟 %s 的可讀可寫\n"
 
-#: fdisk/sfdisk.c:2817
+#: fdisk/sfdisk.c:2815
 #, c-format
 msgid "cannot open %s for reading\n"
 msgstr "無法開啟 %s 用於讀取\n"
 
-#: fdisk/sfdisk.c:2861 fdisk/sfdisk.c:2893
+#: fdisk/sfdisk.c:2859 fdisk/sfdisk.c:2891
 #, c-format
 msgid "%s: %ld cylinders, %ld heads, %ld sectors/track\n"
 msgstr "%s：%ld 磁柱，%ld 磁頭，%ld 磁區/磁軌\n"
 
-#: fdisk/sfdisk.c:2912
+#: fdisk/sfdisk.c:2910
 #, c-format
 msgid "Cannot get size of %s\n"
 msgstr "無法取得 %s 的大小\n"
 
-#: fdisk/sfdisk.c:2992
+#: fdisk/sfdisk.c:2990
 #, c-format
 msgid "bad active byte: 0x%x instead of 0x80\n"
 msgstr "不當的作用中位元組：0x%x 而非 0x80\n"
 
-#: fdisk/sfdisk.c:3011 fdisk/sfdisk.c:3068 fdisk/sfdisk.c:3101
+#: fdisk/sfdisk.c:3009 fdisk/sfdisk.c:3066 fdisk/sfdisk.c:3099
 msgid ""
 "Done\n"
 "\n"
@@ -5872,7 +5872,7 @@ msgstr ""
 "完成\n"
 "\n"
 
-#: fdisk/sfdisk.c:3020
+#: fdisk/sfdisk.c:3018
 #, c-format
 msgid ""
 "You have %d active primary partitions. This does not matter for LILO,\n"
@@ -5881,35 +5881,35 @@ msgstr ""
 "您有 %d 塊作用中的主要分割區。這個不會影響到 LILO，\n"
 "但是 DOS MBR 只能將具有一塊作用中分割區的磁碟開機。\n"
 
-#: fdisk/sfdisk.c:3037
+#: fdisk/sfdisk.c:3035
 #, c-format
 msgid "partition %s has id %x and is not hidden\n"
 msgstr "分割區 %s 具有識別號 %x 而且並未隱藏\n"
 
-#: fdisk/sfdisk.c:3097
+#: fdisk/sfdisk.c:3095
 #, c-format
 msgid "Bad Id %lx\n"
 msgstr "不當的識別號 %lx\n"
 
-#: fdisk/sfdisk.c:3114
+#: fdisk/sfdisk.c:3112
 msgid "This disk is currently in use.\n"
 msgstr "這個磁碟為目前在使用中。\n"
 
-#: fdisk/sfdisk.c:3135
+#: fdisk/sfdisk.c:3133
 #, c-format
 msgid "Fatal error: cannot find %s\n"
 msgstr "嚴重錯誤：找不到 %s\n"
 
-#: fdisk/sfdisk.c:3138
+#: fdisk/sfdisk.c:3136
 #, c-format
 msgid "Warning: %s is not a block device\n"
 msgstr "警告：%s 並非區塊裝置\n"
 
-#: fdisk/sfdisk.c:3144
+#: fdisk/sfdisk.c:3142
 msgid "Checking that no-one is using this disk right now ...\n"
 msgstr "檢查是否沒有人現在正使用這個磁碟…\n"
 
-#: fdisk/sfdisk.c:3146
+#: fdisk/sfdisk.c:3144
 msgid ""
 "\n"
 "This disk is currently in use - repartitioning is probably a bad idea.\n"
@@ -5921,30 +5921,30 @@ msgstr ""
 "卸載所有檔案系統，並關閉這個磁碟上的所有交換分割區。\n"
 "使用 --no-reread 旗標以抑制這個檢查。\n"
 
-#: fdisk/sfdisk.c:3150
+#: fdisk/sfdisk.c:3148
 msgid "Use the --force flag to overrule all checks.\n"
 msgstr "使用 --force 旗標以駁回所有檢查。\n"
 
-#: fdisk/sfdisk.c:3154
+#: fdisk/sfdisk.c:3152
 msgid "OK\n"
 msgstr "確定\n"
 
-#: fdisk/sfdisk.c:3163
+#: fdisk/sfdisk.c:3161
 #, c-format
 msgid "Old situation:\n"
 msgstr "舊的情況：\n"
 
-#: fdisk/sfdisk.c:3167
+#: fdisk/sfdisk.c:3165
 #, c-format
 msgid "Partition %d does not exist, cannot change it\n"
 msgstr "分割區 %d 不存在，無法變更它\n"
 
-#: fdisk/sfdisk.c:3175
+#: fdisk/sfdisk.c:3173
 #, c-format
 msgid "New situation:\n"
 msgstr "新的情況：\n"
 
-#: fdisk/sfdisk.c:3180
+#: fdisk/sfdisk.c:3178
 msgid ""
 "I don't like these partitions - nothing changed.\n"
 "(If you really want this, use the --force option.)\n"
@@ -5952,21 +5952,21 @@ msgstr ""
 "我不喜歡這些分割 - 沒有變更任何東西。\n"
 "(如果您真的想要如此，請使用 --force 選項。)\n"
 
-#: fdisk/sfdisk.c:3183
+#: fdisk/sfdisk.c:3181
 msgid "I don't like this - probably you should answer No\n"
 msgstr "我不喜歡這個 - 您也許應該回答 No\n"
 
-#: fdisk/sfdisk.c:3188
+#: fdisk/sfdisk.c:3186
 #, c-format
 msgid "Are you satisfied with this? [ynq] "
 msgstr "您滿意這個嗎？[ynq] "
 
-#: fdisk/sfdisk.c:3190
+#: fdisk/sfdisk.c:3188
 #, c-format
 msgid "Do you want to write this to disk? [ynq] "
 msgstr "您要將這個寫入磁碟嗎？[ynq] "
 
-#: fdisk/sfdisk.c:3195
+#: fdisk/sfdisk.c:3193
 #, c-format
 msgid ""
 "\n"
@@ -5975,16 +5975,16 @@ msgstr ""
 "\n"
 "sfdisk：未達結尾的輸入\n"
 
-#: fdisk/sfdisk.c:3197
+#: fdisk/sfdisk.c:3195
 msgid "Quitting - nothing changed\n"
 msgstr "離開中 - 沒有變更任何東西\n"
 
-#: fdisk/sfdisk.c:3203
+#: fdisk/sfdisk.c:3201
 #, c-format
 msgid "Please answer one of y,n,q\n"
 msgstr "請以 y,n,q 之一回答\n"
 
-#: fdisk/sfdisk.c:3211
+#: fdisk/sfdisk.c:3209
 #, c-format
 msgid ""
 "Successfully wrote the new partition table\n"
@@ -5993,7 +5993,7 @@ msgstr ""
 "成功寫入新的分割表\n"
 "\n"
 
-#: fdisk/sfdisk.c:3218
+#: fdisk/sfdisk.c:3216
 msgid ""
 "If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n"
 "to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
@@ -9122,32 +9122,32 @@ msgstr ""
 " -v | --verbose           詳細模式\n"
 "\n"
 
-#: mount/lomount.c:1152
+#: mount/lomount.c:1153
 #, c-format
 msgid "%s: invalid offset '%s' specified"
 msgstr "%s：指定了無效的偏移值「%s」"
 
-#: mount/lomount.c:1156
+#: mount/lomount.c:1157
 #, c-format
 msgid "%s: invalid sizelimit '%s' specified"
 msgstr "%s：指定了無效的大小限制「%s」"
 
-#: mount/lomount.c:1171 mount/lomount.c:1211
+#: mount/lomount.c:1172 mount/lomount.c:1212
 #, c-format
 msgid "Loop device is %s\n"
 msgstr "環路裝置是 %s\n"
 
-#: mount/lomount.c:1198
+#: mount/lomount.c:1199
 #, c-format
 msgid "stolen loop=%s...trying again\n"
 msgstr "丟失的環路=%s...再試一次\n"
 
-#: mount/lomount.c:1208
+#: mount/lomount.c:1209
 #, c-format
 msgid "%s: %s: device is busy"
 msgstr "%s：%s：裝置忙碌中"
 
-#: mount/lomount.c:1225
+#: mount/lomount.c:1226
 #, c-format
 msgid "No loop support was available at compile time. Please recompile.\n"
 msgstr "編譯時期就已不支援環路。請重新編譯。\n"
@@ -12448,12 +12448,12 @@ msgstr "懸置模式：%s；懸置系統\n"
 msgid "disable rtc alarm interrupt failed"
 msgstr "停用 rtc 警示插斷"
 
-#: sys-utils/setarch.c:49
+#: sys-utils/setarch.c:51
 #, c-format
 msgid "Switching on %s.\n"
 msgstr "切換於 %s。\n"
 
-#: sys-utils/setarch.c:112
+#: sys-utils/setarch.c:118
 #, c-format
 msgid ""
 "Usage: %s%s [options] [program [program arguments]]\n"
@@ -12464,7 +12464,7 @@ msgstr ""
 "\n"
 "選項：\n"
 
-#: sys-utils/setarch.c:116
+#: sys-utils/setarch.c:122
 #, c-format
 msgid ""
 " -h, --help               displays this help text\n"
@@ -12497,7 +12497,12 @@ msgstr ""
 " -3, --3 gb               限制已用的位址空間最大值為 3 GB\n"
 "     --4 gb               已忽略 (只用於向後相容性)\n"
 
-#: sys-utils/setarch.c:130
+#: sys-utils/setarch.c:137
+#, c-format
+msgid "     --uname-2.6          turns on UNAME26\n"
+msgstr ""
+
+#: sys-utils/setarch.c:139
 #, c-format
 msgid ""
 "\n"
@@ -12506,7 +12511,7 @@ msgstr ""
 "\n"
 "要獲得更多資訊請參看 setarch(8)。\n"
 
-#: sys-utils/setarch.c:142
+#: sys-utils/setarch.c:151
 #, c-format
 msgid ""
 "%s: %s\n"
@@ -12515,16 +12520,16 @@ msgstr ""
 "%s: %s\n"
 "嘗試「%s --help」以獲得更多資訊。\n"
 
-#: sys-utils/setarch.c:214 sys-utils/setarch.c:229
+#: sys-utils/setarch.c:223 sys-utils/setarch.c:238
 #, c-format
 msgid "%s: Unrecognized architecture"
 msgstr "%s：無法辨識的架構"
 
-#: sys-utils/setarch.c:247 sys-utils/setarch.c:254
+#: sys-utils/setarch.c:256 sys-utils/setarch.c:263
 msgid "Not enough arguments"
 msgstr "引數不足"
 
-#: sys-utils/setarch.c:263 sys-utils/setarch.c:316
+#: sys-utils/setarch.c:272 sys-utils/setarch.c:328
 #, c-format
 msgid "Failed to set personality to %s"
 msgstr "設定身分為 %s 時失敗"