#############################################################
#
# U-Boot
#
#############################################################
U_BOOT_VERSION:=$(call qstrip,$(BR2_UBOOT_VERSION))
U_BOOT_BOARD_NAME:=$(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))
# U-Boot may not be selected in the configuration, but mkimage might
# be needed to build/prepare a kernel image. In this case, we just
# pick some random stable U-Boot version that will be used just to
# build mkimage.
ifeq ($(U_BOOT_VERSION),)
U_BOOT_VERSION=2010.03
endif
U_BOOT_SOURCE:=u-boot-$(U_BOOT_VERSION).tar.bz2
U_BOOT_SITE:=ftp://ftp.denx.de/pub/u-boot
U_BOOT_DIR:=$(BUILD_DIR)/u-boot-$(U_BOOT_VERSION)
U_BOOT_CAT:=$(BZCAT)
U_BOOT_BIN:=u-boot.bin
MKIMAGE:=$(HOST_DIR)/usr/bin/mkimage
U_BOOT_TARGETS:=$(BINARIES_DIR)/$(U_BOOT_BIN) $(MKIMAGE)
# u-boot still uses arch=ppc for powerpc
U_BOOT_ARCH=$(KERNEL_ARCH:powerpc=ppc)
U_BOOT_INC_CONF_FILE:=$(U_BOOT_DIR)/include/config.h
ifeq ($(BR2_TARGET_UBOOT_TOOL_MKIMAGE),y)
U_BOOT_TARGETS+=$(TARGET_DIR)/usr/bin/mkimage
endif
ifeq ($(BR2_TARGET_UBOOT_TOOL_ENV),y)
U_BOOT_TARGETS+=$(TARGET_DIR)/usr/sbin/fw_printenv
endif
U_BOOT_CONFIGURE_OPTS += CONFIG_NOSOFTFLOAT=1
# Define a helper function
define insert_define
@echo "#ifdef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
@echo "#undef $(strip $(1))" >> $(U_BOOT_INC_CONF_FILE)
@echo "#endif" >> $(U_BOOT_INC_CONF_FILE)
@echo '#define $(strip $(1)) $(call qstrip,$(2))' >> $(U_BOOT_INC_CONF_FILE)
endef
$(DL_DIR)/$(U_BOOT_SOURCE):
$(call DOWNLOAD,$(U_BOOT_SITE),$(U_BOOT_SOURCE))
$(U_BOOT_DIR)/.unpacked: $(DL_DIR)/$(U_BOOT_SOURCE)
$(U_BOOT_CAT) $(DL_DIR)/$(U_BOOT_SOURCE) \
| tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
mkdir -p $(U_BOOT_DIR)
touch $@
$(U_BOOT_DIR)/.patched: $(U_BOOT_DIR)/.unpacked
toolchain/patch-kernel.sh $(U_BOOT_DIR) boot/u-boot \
u-boot-$(U_BOOT_VERSION)-\*.patch \
u-boot-$(U_BOOT_VERSION)-\*.patch.$(ARCH)
ifneq ($(qstrip $(BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR)),)
toolchain/patch-kernel.sh $(U_BOOT_DIR) $(U_BOOT_CUSTOM_PATCH_DIR) u-boot-$(U_BOOT_VERSION)-\*.patch
endif
touch $@
$(U_BOOT_DIR)/.configured: $(U_BOOT_DIR)/.patched
ifeq ($(U_BOOT_BOARD_NAME),)
$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
endif
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
$(U_BOOT_CONFIGURE_OPTS) \
$(MAKE) -C $(U_BOOT_DIR) \
$(U_BOOT_BOARD_NAME)_config
touch $@
$(U_BOOT_DIR)/.header_modified: $(U_BOOT_DIR)/.configured
# Modify configuration header in $(U_BOOT_INC_CONF_FILE)
ifdef BR2_TARGET_UBOOT_NETWORK
@echo >> $(U_BOOT_INC_CONF_FILE)
@echo "/* Add a wrapper around the values Buildroot sets. */" >> $(U_BOOT_INC_CONF_FILE)
@echo "#ifndef __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
@echo "#define __BR2_ADDED_CONFIG_H" >> $(U_BOOT_INC_CONF_FILE)
$(call insert_define, DATE, $(DATE))
$(call insert_define, CONFIG_LOAD_SCRIPTS, 1)
ifneq ($(strip $(BR2_TARGET_UBOOT_IPADDR)),"")
$(call insert_define, CONFIG_IPADDR, $(BR2_TARGET_UBOOT_IPADDR))
endif
ifneq ($(strip $(BR2_TARGET_UBOOT_GATEWAY)),"")
$(call insert_define, CONFIG_GATEWAYIP, $(BR2_TARGET_UBOOT_GATEWAY))
endif
ifneq ($(strip $(BR2_TARGET_UBOOT_NETMASK)),"")
$(call insert_define, CONFIG_NETMASK, $(BR2_TARGET_UBOOT_NETMASK))
endif
ifneq ($(strip $(BR2_TARGET_UBOOT_SERVERIP)),"")
$(call insert_define, CONFIG_SERVERIP, $(BR2_TARGET_UBOOT_SERVERIP))
endif
ifneq ($(strip $(BR2_TARGET_UBOOT_ETHADDR)),"")
$(call insert_define, CONFIG_ETHADDR, $(BR2_TARGET_UBOOT_ETHADDR))
endif
ifneq ($(strip $(BR2_TARGET_UBOOT_ETH1ADDR)),"")
$(call insert_define, CONFIG_ETH1ADDR, $(BR2_TARGET_UBOOT_ETH1ADDR))
endif
@echo "#endif /* __BR2_ADDED_CONFIG_H */" >> $(U_BOOT_INC_CONF_FILE)
endif # BR2_TARGET_UBOOT_NETWORK
touch $@
# Build U-Boot itself
$(U_BOOT_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/.header_modified
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
$(U_BOOT_CONFIGURE_OPTS) \
$(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" ARCH=$(U_BOOT_ARCH) \
-C $(U_BOOT_DIR)
# Copy the result to the images/ directory
$(BINARIES_DIR)/$(U_BOOT_BIN): $(U_BOOT_DIR)/$(U_BOOT_BIN)
rm -f $(BINARIES_DIR)/$(U_BOOT_BIN)
cp -dpf $(U_BOOT_DIR)/$(U_BOOT_BIN) $(BINARIES_DIR)/
# Build just mkimage for the host. It might have already been built by
# the U-Boot build procedure, but mkimage may also be needed even if
# U-Boot isn't selected in the configuration, to generate a kernel
# uImage.
$(MKIMAGE): $(U_BOOT_DIR)/.patched
mkdir -p $(@D)
$(MAKE) -C $(U_BOOT_DIR) tools
cp -dpf $(U_BOOT_DIR)/tools/mkimage $(@D)
# Build manually mkimage for the target
$(TARGET_DIR)/usr/bin/mkimage: $(U_BOOT_DIR)/.configured
mkdir -p $(@D)
$(TARGET_CC) -I$(U_BOOT_DIR)/include -I$(U_BOOT_DIR)/tools \
-DUSE_HOSTCC -o $@ \
$(U_BOOT_DIR)/common/image.c \
$(wildcard $(addprefix $(U_BOOT_DIR)/tools/,default_image.c \
fit_image.c imximage.c kwbimage.c mkimage.c)) \
$(addprefix $(U_BOOT_DIR)/lib_generic/,crc32.c md5.c sha1.c) \
$(U_BOOT_DIR)/tools/os_support.c \
$(U_BOOT_DIR)/libfdt/fdt*.c
$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $@
# Build manually fw_printenv for the target
$(TARGET_DIR)/usr/sbin/fw_printenv: $(U_BOOT_DIR)/.configured
mkdir -p $(@D)
$(TARGET_CC) -I$(U_BOOT_DIR)/include -I$(LINUX_HEADERS_DIR)/include \
-DUSE_HOSTCC -o $@ \
$(U_BOOT_DIR)/tools/env/*.c $(U_BOOT_DIR)/lib_generic/crc32.c
$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $@
ln -sf fw_printenv $(TARGET_DIR)/usr/sbin/fw_setenv
u-boot: $(U_BOOT_TARGETS)
u-boot-clean:
-$(MAKE) -C $(U_BOOT_DIR) clean
rm -f $(MKIMAGE)
u-boot-dirclean:
rm -rf $(U_BOOT_DIR)
u-boot-source: $(DL_DIR)/$(U_BOOT_SOURCE)
u-boot-unpacked: $(U_BOOT_DIR)/.patched
u-boot-configured: $(U_BOOT_DIR)/.header_modified
#############################################################
#
# Toplevel Makefile options
#
#############################################################
ifeq ($(BR2_TARGET_UBOOT),y)
TARGETS+=u-boot
# we NEED a board name
ifeq ($(U_BOOT_BOARD_NAME),)
$(error NO U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
endif
endif
