summaryrefslogtreecommitdiffstats
path: root/hw/arm
Commit message (Collapse)AuthorAgeFilesLines
...
* hw/arm/musca.c: Implement models of the Musca-A and -B1 boardsPeter Maydell2019-02-212-0/+198
| | | | | | | | | | | | | The Musca-A and Musca-B1 development boards are based on the SSE-200 subsystem for embedded. Implement an initial skeleton model of these boards, which are similar but not identical. This commit creates the board model with the SSE and the IRQ splitters to wire IRQs up to its two CPUs. As yet there are no devices and no memory: these will be added later. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* hw/arm/armsse: Allow boards to specify init-svtorPeter Maydell2019-02-211-4/+4
| | | | | | | | | | | | The Musca boards have DAPLink firmware that sets the initial secure VTOR value (the location of the vector table) differently depending on the boot mode (from flash, from RAM, etc). Export the init-svtor as a QOM property of the ARMSSE object so that the board can change it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* hw/arm/armsse: Fix memory leak in error-exit pathPeter Maydell2019-02-211-4/+6
| | | | | | | | | | | | | | Coverity points out (CID 1398632, CID 1398650) that we leak a couple of allocated strings in the error-exit code path for setting up the MHUs in the ARMSSE. Fix this bug by moving the allocate-and-free of each string to be closer to the use, so we do the free before doing the error-exit check. Fixes: f8574705f62b38a ("hw/arm/armsse: Add unimplemented-device stubs for MHUs") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190215113707.24553-1-peter.maydell@linaro.org
* hw/arm/armsse: Fix miswiring of expansion IRQsPeter Maydell2019-02-151-1/+1
| | | | | | | | | | | | | In commit 91c1e9fcbd7548db368 where we added dual-CPU support to the ARMSSE, we set up the wiring of the expansion IRQs via nested loops: the outer loop on 'i' loops for each CPU, and the inner loop on 'j' loops for each interrupt. Fix a typo which meant we were wiring every expansion IRQ line to external IRQ 0 on CPU 0 and to external IRQ 1 on CPU 1. Fixes: 91c1e9fcbd7548db368 ("hw/arm/armsse: Support dual-CPU configuration") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* char: allow specifying a GMainContext at opening timePaolo Bonzini2019-02-131-1/+1
| | | | | | | | | | | | This will be needed by vhost-user-test, when each test switches to its own GMainLoop and GMainContext. Otherwise, for a reconnecting socket the initial connection will happen on the default GMainContext, and no one will be listening on it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190202110834.24880-1-pbonzini@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2019-02-053-3/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * cpu-exec fixes (Emilio, Laurent) * TCG bugfix in queue.h (Paolo) * high address load for linuxboot (Zhijian) * PVH support (Liam, Stefano) * misc i386 changes (Paolo, Robert, Doug) * configure tweak for openpty (Thomas) * elf2dmp port to Windows (Viktor) * initial improvements to Makefile infrastructure (Yang + GSoC 2013) # gpg: Signature made Tue 05 Feb 2019 17:34:42 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (76 commits) queue: fix QTAILQ_FOREACH_REVERSE_SAFE scsi-generic: Convert from DPRINTF() macro to trace events scsi-disk: Convert from DPRINTF() macro to trace events pc: Use hotplug_handler_(plug|unplug|unplug_request) i386: hvf: Fix smp boot hangs hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller hw/tricore/Makefile.objs: Create CONFIG_* for tricore hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc hw/moxie/Makefile.objs: Conditionally build moxie hw/hppa/Makefile.objs: Create CONFIG_* for hppa hw/cris/Makefile.objs: Create CONFIG_* for cris hw/alpha/Makefile.objs: Create CONFIG_* for alpha hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards hw/nios2/Makefile.objs: Conditionally build nios2 hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # qemu-deprecated.texi
| * hw/arm/Makefile.objs: CONFIG_ARM_VIRT created for virt boardYang Zhong2019-02-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Make ARM virt code configurable and the new CONFIG_ARM_VIRT definitions added to the default-configs/arm-softmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-8-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * elf: Add optional function ptr to load_elf() to parse ELF notesLiam Merwick2019-02-052-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds an optional function pointer, 'elf_note_fn', to load_elf() which causes load_elf() to additionally parse any ELF program headers of type PT_NOTE and check to see if the ELF Note is of the type specified by the 'translate_opaque' arg. If a matching ELF Note is found then the specfied function pointer is called to process the ELF note. Passing a NULL function pointer results in ELF Notes being skipped. The first consumer of this functionality is the PVHboot support which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while loading the uncompressed kernel binary in order to discover the boot entry address for the x86/HVM direct boot ABI. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | hw/arm/boot: Support DTB autoload for firmware-only bootsPeter Maydell2019-02-051-1/+0Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The arm_boot_info struct has a skip_dtb_autoload flag: if this is set to true by the board code then arm_load_kernel() will not load the DTB itself, but will leave this for the board code to do itself later. However, the check for this is done in a code path which is only executed for the case where we load a kernel image file. If we're taking the "boot via firmware" code path then the flag isn't honoured and the DTB is never loaded. We didn't notice this because the only real user of "boot via firmware" that cares about the DTB is the virt board (for UEFI boot), and that always wants skip_dtb_autoload anyway. But the SBSA reference board model we're planning to add will want the flag to behave correctly. Now we've refactored the arm_load_kernel() function, the fix is simple: drop the early 'return' so we fall into the same "load the DTB" code the boot-direct-kernel path uses. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20190131112240.8395-6-peter.maydell@linaro.org
* | hw/arm/boot: Clarify why arm_setup_firmware_boot() doesn't set env->boot_infoPeter Maydell2019-02-051-1/+2
| | | | | | | | | | | | | | | | | | | | The code path for booting firmware doesn't set env->boot_info. At first sight this looks odd, so add a comment saying why we don't. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20190131112240.8395-5-peter.maydell@linaro.org
* | hw/arm/boot: Factor out "set up firmware boot" codePeter Maydell2019-02-051-43/+49
| | | | | | | | | | | | | | | | | | | | | | | | Factor out the "boot via firmware" code path from arm_load_kernel() into its own function. This commit only moves code around; no semantic changes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20190131112240.8395-4-peter.maydell@linaro.org
* | hw/arm/boot: Factor out "direct kernel boot" code into its own functionPeter Maydell2019-02-051-70/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Factor out the "direct kernel boot" code path from arm_load_kernel() into its own function; this function is getting long enough that the code flow is a bit confusing. This commit only moves code around; no semantic changes. We leave the "load the dtb" code in arm_load_kernel() -- this is currently only used by the "direct kernel boot" path, but this is a bug which we will fix shortly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20190131112240.8395-3-peter.maydell@linaro.org
* | hw/arm/boot: Fix block comment style in arm_load_kernel()Peter Maydell2019-02-051-10/+20
|/ | | | | | | | | | | | Fix the block comment style in arm_load_kernel() to QEMU's current style preferences. This will allow us to do some refactoring of this function without checkpatch complaining about the code-motion patches. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20190131112240.8395-2-peter.maydell@linaro.org
* arm: Instantiate NRF51 special NVM's and NVMCSteffen Görtz2019-02-011-12/+29
| | | | | | | | | | | Instantiates UICR, FICR, FLASH and NVMC in nRF51 SOC. Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190201023357.22596-3-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* arm: Clarify the logic of set_pc()Julia Suvorova2019-02-011-4/+0Star
| | | | | | | | | | | | | | Until now, the set_pc logic was unclear, which raised questions about whether it should be used directly, applying a value to PC or adding additional checks, for example, set the Thumb bit in Arm cpu. Let's set the set_pc logic for “Configure the PC, as was done in the ELF file” and implement synchronize_with_tb hook for preserving PC to cpu_tb_exec. Signed-off-by: Julia Suvorova <jusual@mail.ru> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190129121817.7109-1-jusual@mail.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/mps2-tz: Add mps2-an521 modelPeter Maydell2019-02-011-2/+36
| | | | | | | | | | Add a model of the MPS2 FPGA image described in Application Note AN521. This is identical to the AN505 image, except that it uses the SSE-200 rather than the IoTKit and so has two Cortex-M33 CPUs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-24-peter.maydell@linaro.org
* hw/arm/mps2-tz: Add IRQ infrastructure to support SSE-200Peter Maydell2019-02-011-20/+59
| | | | | | | | | | | | | | In preparation for adding support for the AN521 MPS2 image, we need to handle wiring up the MPS2 device interrupt lines to both CPUs in the SSE-200, rather than just the one that the IoTKit has. Abstract out a "connect to the IoTKit interrupt line" function and make it connect to a splitter which feeds both sets of inputs for the SSE-200 case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-23-peter.maydell@linaro.org
* hw/arm/armsse: Add SSE-200 modelPeter Maydell2019-02-011-0/+12
| | | | | | | | | Add a model of the SSE-200, now we have put in all the code that lets us make it different from the IoTKit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-22-peter.maydell@linaro.org
* hw/arm/armsse: Add CPU_IDENTITY block to SSE-200Peter Maydell2019-02-011-0/+28
| | | | | | | | | Instantiate a copy of the CPU_IDENTITY register block for each CPU in an SSE-200. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-21-peter.maydell@linaro.org
* hw/arm/armsse: Add unimplemented-device stub for CPU local control registersPeter Maydell2019-02-011-0/+31
| | | | | | | | | | | | The SSE-200 has a "CPU local security control" register bank; add an unimplemented-device stub for it. (The register bank has only one interesting register, which allows the guest to lock down changes to various CPU registers so they cannot be modified further. We don't support that in our Cortex-M33 model anyway.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-19-peter.maydell@linaro.org
* hw/arm/armsse: Add unimplemented-device stub for cache control registersPeter Maydell2019-02-011-1/+38
| | | | | | | | | The SSE-200 gives each CPU a register bank to use to control its L1 instruction cache. Put in an unimplemented-device stub for this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-18-peter.maydell@linaro.org
* hw/arm/armsse: Add unimplemented-device stubs for PPUsPeter Maydell2019-02-011-0/+58
| | | | | | | | | Add unimplemented-device stubs for the various Power Policy Unit devices that the SSE-200 has. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-17-peter.maydell@linaro.org
* hw/arm/armsse: Add unimplemented-device stubs for MHUsPeter Maydell2019-02-011-0/+41
| | | | | | | | | | The SSE-200 has two Message Handling Units (MHUs), which sit behind the APB PPC0. Wire up some unimplemented-device stubs for these, since we don't yet implement a real model of this device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-16-peter.maydell@linaro.org
* iotkit-sysinfo: Make SYS_VERSION and SYS_CONFIG configurablePeter Maydell2019-02-011-0/+51
| | | | | | | | | | | The SYS_VERSION and SYS_CONFIG register values differ between the IoTKit and SSE-200. Make them configurable via QOM properties rather than hard-coded, and set them appropriately in the ARMSSE code that instantiates the IOTKIT_SYSINFO device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-15-peter.maydell@linaro.org
* hw/arm/armsse: Put each CPU in its own cluster objectPeter Maydell2019-02-011-3/+28
| | | | | | | | | | Create a cluster object to hold each CPU in the SSE. They are logically distinct and may be configured differently (for instance one may not have an FPU where the other does). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-14-peter.maydell@linaro.org
* hw/arm/armsse: Give each CPU its own view of memoryPeter Maydell2019-02-011-2/+20
| | | | | | | | | | | | | | | | Give each CPU its own container memory region. This is necessary for two reasons: * some devices are instantiated one per CPU and the CPU sees only its own device * since a memory region can only be put into one container, we must give each armv7m object a different MemoryRegion as its 'memory' property, or a dual-CPU configuration will assert on realize when the second armv7m object tries to put the MR into a container when it is already in the first armv7m object's container Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-13-peter.maydell@linaro.org
* hw/arm/armsse: Support dual-CPU configurationPeter Maydell2019-02-011-42/+164
| | | | | | | | | | | | | | | | | | | The SSE-200 has two Cortex-M33 CPUs. These see the same view of memory, with the exception of the "private CPU region" which has per-CPU devices. Internal device interrupts for SSE-200 devices are mostly wired up to both CPUs, with the exception of a few per-CPU devices. External GPIO inputs on the SSE-200 device are provided for the second CPU's interrupts above 32, as is already the case for the first CPU. Refactor the code to support creation of multiple CPUs. For the moment we leave all CPUs with the same view of memory: this will not work in the multiple-CPU case, but we will fix this in the following commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-12-peter.maydell@linaro.org
* hw/arm/armsse: Make SRAM bank size configurablePeter Maydell2019-02-011-2/+16
| | | | | | | | | | | | | | | For the IoTKit the SRAM bank size is always 32K (15 bits); for the SSE-200 this is a configurable parameter, which defaults to 32K but can be changed when it is built into a particular SoC. For instance the Musca-B1 board sets it to 128K (17 bits). Make the bank size a QOM property. We follow the SSE-200 hardware in naming the parameter SRAM_ADDR_WIDTH, which specifies the number of address bits of a single SRAM bank. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-11-peter.maydell@linaro.org
* hw/arm/armsse: Make number of SRAM banks parameterisedPeter Maydell2019-02-011-29/+49
| | | | | | | | | | The SSE-200 has four banks of SRAM, each with its own Memory Protection Controller, where the IoTKit has only one. Make the number of SRAM banks a field in ARMSSEInfo. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-10-peter.maydell@linaro.org
* hw/misc/iotkit-secctl: Support 4 internal MPCsPeter Maydell2019-02-011-3/+3
| | | | | | | | | | | | | | | | | | The SSE-200 has 4 banks of SRAM, each with its own internal Memory Protection Controller. The interrupt status for these extra MPCs appears in the same security controller SECMPCINTSTATUS register as the MPC for the IoTKit's single SRAM bank. Enhance the iotkit-secctl device to allow 4 MPCs. (If the particular IoTKit/SSE variant in use does not have all 4 MPCs then the unused inputs will simply result in the SECMPCINTSTATUS bits being zero as required.) The hardcoded constant "1"s in armsse.c indicate the actual number of SRAM MPCs the IoTKit has, and will be replaced in the following commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-9-peter.maydell@linaro.org
* hw/arm/iotkit: Rename files to hw/arm/armsse.[ch]Peter Maydell2019-02-013-3/+3
| | | | | | | | | | | Rename the files that used to be iotkit.[ch] to armsse.[ch] to reflect the fact they new cover multiple Arm subsystems for embedded. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-8-peter.maydell@linaro.org
* hw/arm/iotkit: Rename 'iotkit' local variables and functionsPeter Maydell2019-02-011-34/+34
| | | | | | | | | | | | | | | | Rename various internal uses of 'iotkit' in hw/arm/iotkit.c to 'armsse', for consistency. The remaining occurences are: * related to the devices TYPE_IOTKIT_SYSCTL, TYPE_IOTKIT_SYSINFO, etc, which this refactor is not touching * references that apply specifically to the IoTKit (like the lack of a private CPU region) * the vmstate, which keeps its old "iotkit" name for migration compatibility reasons Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-7-peter.maydell@linaro.org
* hw/arm/iotkit: Refactor into abstract base class and subclassPeter Maydell2019-02-011-5/+29
| | | | | | | | | | | | | | | The Arm SSE-200 Subsystem for Embedded is a revised and extended version of the older IoTKit SoC. Prepare for adding a model of it by refactoring the IoTKit code into an abstract base class which contains the functionality, driven by a class data block specific to each subclass. (This is the same approach used by the existing bcm283x SoC family implementation.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-6-peter.maydell@linaro.org
* hw/arm/iotkit: Rename IoTKit to ARMSSEPeter Maydell2019-02-012-30/+31
| | | | | | | | | | | | | | | | | | | | | | The Arm IoTKit was effectively the forerunner of a series of subsystems for embedded SoCs, named the SSE-050, SSE-100 and SSE-200: https://developer.arm.com/products/system-design/subsystems These are generally quite similar, though later iterations have extra devices that earlier ones do not. We want to add a model of the SSE-200, which means refactoring the IoTKit code into an abstract base class and subclasses (using the same design that the bcm283x SoC and Aspeed SoC family implementations do). As a first step, rename the IoTKit struct and QOM macros to ARMSSE, which is what we're going to name the base class. We temporarily retain TYPE_IOTKIT to avoid changing the code that instantiates a TYPE_IOTKIT device here and then changing it back again when it is re-introduced as a subclass. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-5-peter.maydell@linaro.org
* armv7m: Pass through start-powered-off CPU propertyPeter Maydell2019-02-011-0/+10
| | | | | | | | | | | | | | | | Expose "start-powered-off" as a property of the ARMv7M container, which we just pass through to the CPU object in the same way that we do for "init-svtor" and "idau". (We want this for the SSE-200, which powers up only the first CPU at reset and leaves the second powered down.) As with the other CPU properties here, we can't just use alias properties, because the CPU QOM object is not created until armv7m realize time. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-4-peter.maydell@linaro.org
* armv7m: Make cpu object a child of the armv7m containerPeter Maydell2019-02-011-1/+6
| | | | | | | | | | | | Rather than just creating the CPUs with object_new, make them child objects of the armv7m container. This will allow the cluster code to find the CPUs if an armv7m object is made a child of a cluster object. object_new_with_props() will do the parenting for us. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-3-peter.maydell@linaro.org
* armv7m: Don't assume the NVIC's CPU is CPU 0Peter Maydell2019-02-011-2/+4
| | | | | | | | | | | | | | Currently the ARMv7M NVIC object's realize method assumes that the CPU the NVIC is attached to is CPU 0, because it thinks there can only ever be one CPU in the system. To allow a dual-Cortex-M33 setup we need to remove this assumption; instead the armv7m wrapper object tells the NVIC its CPU, in the same way that it already tells the CPU what the NVIC is. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-2-peter.maydell@linaro.org
* hw/arm/nrf51_soc: set object owner in memory_region_init_ramkumar sourav2019-02-011-1/+2
| | | | | | | | | | | set object owner in memory_region_init_ram() instead of NULL. Signed-off-by: kumar sourav <sourav.jb1988@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190125155630.17430-1-sourav.jb1988@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/xlnx-zynqmp: Realize cluster after putting RPUs in itPeter Maydell2019-01-291-2/+2
| | | | | | | | | | | | | | | | Currently the cluster implementation doesn't have any constraints on the ordering of realizing the TYPE_CPU_CLUSTER and populating it with child objects. We want to impose a constraint that realize must happen only after all the child objects are added, so move the realize of rpu_cluster. (The apu_cluster is already realized after child population.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20190121152218.9592-2-peter.maydell@linaro.org
* xlnx-zynqmp: Don't create rpu-cluster if there are no RPUsPeter Maydell2019-01-291-0/+5
| | | | | | | | | | | | | If we aren't going to create any RPUs, then don't create the rpu-cluster unit. This allows us to add an assertion to the cluster object that it contains at least one CPU, which helps to avoid bugs in creating clusters and putting CPUs in them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190121184314.14311-1-peter.maydell@linaro.org
* arm: Stub out NRF51 TWI magnetometer/accelerometer detectionSteffen Görtz2019-01-291-0/+16
| | | | | | | | | | | | | Recent microbit firmwares panic if the TWI magnetometer/accelerometer devices are not detected during startup. We don't implement TWI (I2C) so let's stub out these devices just to let the firmware boot. Signed-off by: Steffen Görtz <contrib@steffen-goertz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190110094020.18354-2-stefanha@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: fixed comment style] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/virt-acpi-build: Set COHACC override flag in IORT SMMUv3 nodeEric Auger2019-01-211-0/+1
| | | | | | | | | | | | | | | | Let's report IO-coherent access is supported for translation table walks, descriptor fetches and queues by setting the COHACC override flag. Without that, we observe wrong command opcodes. The DT description also advertises the dma coherency. Fixes a703b4f6c1ee ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table") Signed-off-by: Eric Auger <eric.auger@redhat.com> Reported-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20190107101041.765-1-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* avoid TABs in files that only contain a fewPaolo Bonzini2019-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Merge remote-tracking branch ↵Peter Maydell2019-01-076-33/+128
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/pmaydell/tags/pull-target-arm-20190107' into staging target-arm queue: * Support u-boot 'noload' images for Arm (as used by NetBSD/evbarm GENERIC kernel) * hw/misc/tz-mpc: Fix value of BLK_MAX register * target/arm: Emit barriers for A32/T32 load-acquire/store-release insns * nRF51 SoC: add timer, GPIO, RNG peripherals * hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller * cpus.c: Fix race condition in cpu_stop_current() * hw/arm: versal: Plug memory leaks * Allow M profile boards to run even if -kernel not specified * gdbstub: Add multiprocess extension support for use when the board has multiple CPUs of different types (like the Xilinx Zynq boards) * target/arm: Don't decode S bit in SVE brk[ab] merging insns * target/arm: Convert ARM_TBFLAG_* to FIELDs # gpg: Signature made Mon 07 Jan 2019 16:29:52 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190107: (37 commits) Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel. hw/misc/tz-mpc: Fix value of BLK_MAX register target/arm: Emit barriers for A32/T32 load-acquire/store-release insns arm: Add Clock peripheral stub to NRF51 SOC tests/microbit-test: Add Tests for nRF51 Timer arm: Instantiate NRF51 Timers hw/timer/nrf51_timer: Add nRF51 Timer peripheral tests/microbit-test: Add Tests for nRF51 GPIO arm: Instantiate NRF51 general purpose I/O hw/gpio/nrf51_gpio: Add nRF51 GPIO peripheral arm: Instantiate NRF51 random number generator hw/misc/nrf51_rng: Add NRF51 random number generator peripheral arm: Add header to host common definition for nRF51 SOC peripherals qtest: Add set_irq_in command to set IRQ/GPIO level hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controller cpus.c: Fix race condition in cpu_stop_current() MAINTAINERS: Add ARM-related files for hw/[misc|input|timer]/ hw/arm: versal: Plug memory leaks Revert "armv7m: Guard against no -kernel argument" arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clusters ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * Support u-boot noload images for arm as used by, NetBSD/evbarm GENERIC kernel.Nick Hudson2019-01-071-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | noload kernels are loaded with the u-boot image header and as a result the header size needs adding to the entry point. Fake up a hdr so the kernel image is loaded at the right address and the entry point is adjusted appropriately. The default location for the uboot file is 32MiB above bottom of DRAM. This matches the recommendation in Documentation/arm/Booting. Clarify the load_uimage API to state the passing of a load address when an image doesn't specify one, or when loading a ramdisk is expected. Adjust callers of load_uimage, etc. Signed-off-by: Nick Hudson <skrll@netbsd.org> Message-id: 11488a08-1fe0-a278-2210-deb64731107f@gmx.co.uk Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * arm: Add Clock peripheral stub to NRF51 SOCSteffen Görtz2019-01-071-0/+26
| | | | | | | | | | | | | | | | | | | | | | This stubs enables the microbit-micropython firmware to run on the microbit machine. Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103091119.9367-12-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * arm: Instantiate NRF51 TimersSteffen Görtz2019-01-071-0/+26
| | | | | | | | | | | | | | | | | | | | | | Instantiates TIMER0 - TIMER2 Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103091119.9367-10-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * arm: Instantiate NRF51 general purpose I/OSteffen Görtz2019-01-071-0/+16
| | | | | | | | | | | | | | | | | | | | | | Instantiates GPIO peripheral model Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103091119.9367-7-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * arm: Instantiate NRF51 random number generatorSteffen Görtz2019-01-071-0/+16
| | | | | | | | | | | | | | | | | | | | | | Use RNG in SOC. Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103091119.9367-5-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * arm: Add header to host common definition for nRF51 SOC peripheralsSteffen Görtz2019-01-071-21/+12Star
| | | | | | | | | | | | | | | | | | | | | | | | Adds a header that provides definitions that are used across nRF51 peripherals Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103091119.9367-3-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-22 13:38:08 +0100