summaryrefslogtreecommitdiffstats
path: root/target/arm
Commit message (Collapse)AuthorAgeFilesLines
* hw/arm/virt: KVM: The IPA lower bound is 32Andrew Jones2021-03-122-3/+7
| | | | | | | | | | | | | | | | | | | | | The virt machine already checks KVM_CAP_ARM_VM_IPA_SIZE to get the upper bound of the IPA size. If that bound is lower than the highest possible GPA for the machine, then QEMU will error out. However, the IPA is set to 40 when the highest GPA is less than or equal to 40, even when KVM may support an IPA limit as low as 32. This means KVM may fail the VM creation unnecessarily. Additionally, 40 is selected with the value 0, which means use the default, and that gets around a check in some versions of KVM, causing a difficult to debug fail. Always use the IPA size that corresponds to the highest possible GPA, unless it's lower than 32, in which case use 32. Also, we must still use 0 when KVM only supports the legacy fixed 40 bit IPA. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Message-id: 20210310135218.255205-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Update sve reduction vs simd_descRichard Henderson2021-03-122-2/+2
| | | | | | | | | | | | | | | With the reduction operations, we intentionally increase maxsz to the next power of 2, so as to fill out the reduction tree correctly. Since e2e7168a214b, oprsz must equal maxsz, with exceptions for small vectors, so this triggers an assertion for vector sizes > 32 that are not themselves a power of 2. Pass the power-of-two value in the simd_data field instead. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-9-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Update WHILE for PREDDESCRichard Henderson2021-03-122-5/+6
| | | | | | | | | | Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Update CNTP for PREDDESCRichard Henderson2021-03-122-6/+6
| | | | | | | | | | Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Update BRKA, BRKB, BRKN for PREDDESCRichard Henderson2021-03-122-18/+16Star
| | | | | | | | | | Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Update find_last_active for PREDDESCRichard Henderson2021-03-122-7/+6Star
| | | | | | | | | | Since b64ee454a4a0, all predicate operations should be using these field macros for predicates. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Fix sve_punpk_p vs odd vector lengthsRichard Henderson2021-03-121-2/+2
| | | | | | | | | | Wrote too much with punpk1 with vl % 512 != 0. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Fix sve_zip_p vs odd vector lengthsRichard Henderson2021-03-121-11/+14
| | | | | | | | | | | | | | | | Wrote too much with low-half zip (zip1) with vl % 512 != 0. Adjust all of the x + (y << s) to x | (y << s) as a style fix. We only ever have exact overlap between D, M, and N. Therefore we only need a single temporary, and we do not need to check for partial overlap. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Fix sve_uzp_p vs odd vector lengthsRichard Henderson2021-03-121-9/+21
| | | | | | | | | | | | | | | | Missed out on compressing the second half of a predicate with length vl % 512 > 256. Adjust all of the x + (y << s) to x | (y << s) as a general style fix. Drop the extract64 because the input uint64_t are known to be already zero-extended from the current size of the predicate. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210309155305.11301-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Merge remote-tracking branch ↵Peter Maydell2021-03-112-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request # gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits) sysemu: Let VMChangeStateHandler take boolean 'running' argument sysemu/runstate: Let runstate_is_running() return bool hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards qemu-common.h: Update copyright string to 2021 tests/fp/fp-test: Replace the word 'blacklist' qemu-options: Replace the word 'blacklist' seccomp: Replace the word 'blacklist' scripts/tracetool: Replace the word 'whitelist' ui: Replace the word 'whitelist' virtio-gpu: Adjust code space style exec/memory: Use struct Object typedef fuzz-test: remove unneccessary debugging flags net: Use id_generate() in the network subsystem, too MAINTAINERS: Fix the location of tools manuals vhost_user_gpu: Drop dead check for g_malloc() failure backends/dbus-vmstate: Fix short read error handling target/hexagon/gen_tcg_funcs: Fix a typo hw/elf_ops: Fix a typo ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * sysemu: Let VMChangeStateHandler take boolean 'running' argumentPhilippe Mathieu-Daudé2021-03-092-2/+2
| | | | | | | | | | | | | | | | | | | | | | The 'running' argument from VMChangeStateHandler does not require other value than 0 / 1. Make it a plain boolean. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210111152020.1422021-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* | Merge remote-tracking branch ↵Peter Maydell2021-03-114-6/+6
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging Testing, guest-loader and other misc tweaks - add warning text to quickstart example - add CFI tests to CI - use --arch-only for docker pre-requisites - fix .editorconfig for emacs - add guest-loader for Xen-like hypervisor testing - move generic-loader docs into manual proper - move semihosting out of hw/ # gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2: semihosting: Move hw/semihosting/ -> semihosting/ semihosting: Move include/hw/semihosting/ -> include/semihosting/ tests/avocado: add boot_xen tests docs: add some documentation for the guest-loader docs: move generic-loader documentation into the main manual hw/core: implement a guest-loader to support static hypervisor guests device_tree: add qemu_fdt_setprop_string_array helper hw/riscv: migrate fdt field to generic MachineState hw/board: promote fdt from ARM VirtMachineState to MachineState .editorconfig: update the automatic mode setting for Emacs tests/docker: Use --arch-only when building Debian cross image gitlab-ci.yml: Add jobs to test CFI flags gitlab-ci.yml: Allow custom # of parallel linkers tests/docker: add a test-tcg for building then running check-tcg docs/system: add a gentle prompt for the complexity to come Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | semihosting: Move include/hw/semihosting/ -> include/semihosting/Philippe Mathieu-Daudé2021-03-104-6/+6
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | We want to move the semihosting code out of hw/ in the next patch. This patch contains the mechanical steps, created using: $ git mv include/hw/semihosting/ include/ $ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-2-f4bug@amsat.org> Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
* / target/arm: Restrict v7A TCG cpus to TCG accelPhilippe Mathieu-Daudé2021-03-082-335/+318Star
|/ | | | | | | | | | | | | | | KVM requires the target cpu to be at least ARMv8 architecture (support on ARMv7 has been dropped in commit 82bf7ae84ce: "target/arm: Remove KVM support for 32-bit Arm hosts"). A KVM-only build won't be able to run TCG cpus, move the v7A CPU definitions to cpu_tcg.c. Reported-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210306151801.2388182-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm/cpu: Update coding style to make checkpatch.pl happyPhilippe Mathieu-Daudé2021-03-051-4/+8
| | | | | | | | | | We will move this code in the next commit. Clean it up first to avoid checkpatch.pl errors. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210221222617.2579610-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Restrict v8M IDAU to TCGPhilippe Mathieu-Daudé2021-03-052-7/+8
| | | | | | | | | | | | IDAU is specific to M-profile. KVM only supports A-profile. Restrict this interface to TCG, as it is pointless (and confusing) on a KVM-only build. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210221222617.2579610-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Use TCF0 and TFSRE0 for unprivileged tag checksPeter Collingbourne2021-03-052-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Section D6.7 of the ARM ARM states: For the purpose of determining Tag Check Fault handling, unprivileged load and store instructions are treated as if executed at EL0 when executed at either: - EL1, when the Effective value of PSTATE.UAO is 0. - EL2, when both the Effective value of HCR_EL2.{E2H, TGE} is {1, 1} and the Effective value of PSTATE.UAO is 0. ARM has confirmed a defect in the pseudocode function AArch64.TagCheckFault that makes it inconsistent with the above wording. The remedy is to adjust references to PSTATE.EL in that function to instead refer to AArch64.AccessUsesEL(acctype), so that unprivileged instructions use SCTLR_EL1.TCF0 and TFSRE0_EL1. The exception type for synchronous tag check faults remains unchanged. This patch implements the described change by partially reverting commits 50244cc76abc and cc97b0019bb5. Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219201820.2672077-1-pcc@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Speed up aarch64 TBL/TBXRichard Henderson2021-03-054-84/+56Star
| | | | | | | | | | | | | | | | Always perform one call instead of two for 16-byte operands. Use byte loads/stores directly into the vector register file instead of extractions and deposits to a 64-bit local variable. In order to easily receive pointers into the vector register file, convert the helper to the gvec out-of-line signature. Move the helper into vec_helper.c, where it can make use of H1 and clear_tail. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210224230532.276878-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Set ID_PFR2.SSBS to 1 for "max" 32-bit CPURebecca Cran2021-03-051-0/+4
| | | | | | | | | | Enable FEAT_SSBS for the "max" 32-bit CPU. Signed-off-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210216224543.16142-4-rebecca@nuviainc.com [PMM: fix typo causing compilation failure] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Enable FEAT_SSBS for "max" AARCH64 CPURebecca Cran2021-03-051-0/+5
| | | | | | | | | Set ID_AA64PFR1_EL1.SSBS to 2 and ID_PFR2.SSBS to 1. Signed-off-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210216224543.16142-3-rebecca@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Add support for FEAT_SSBS, Speculative Store Bypass SafeRebecca Cran2021-03-054-1/+69
| | | | | | | | | | Add support for FEAT_SSBS. SSBS (Speculative Store Bypass Safe) is an optional feature in ARMv8.0, and mandatory in ARMv8.5. Signed-off-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210216224543.16142-2-rebecca@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* exec: Move TranslationBlock typedef to qemu/typedefs.hRichard Henderson2021-02-181-2/+1Star
| | | | | | | | | | | | This also means we don't need an extra declaration of the structure in hw/core/cpu.h. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210208233906.479571-2-richard.henderson@linaro.org> Message-Id: <20210213130325.14781-11-alex.bennee@linaro.org>
* Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell2021-02-171-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | staging * HVF fixes * Extra qos-test debugging output (Christian) * SEV secret address autodetection (James) * SEV-ES support (Thomas) * Relocatable paths bugfix (Stefan) * RR fix (Pavel) * EventNotifier fix (Greg) # gpg: Signature made Tue 16 Feb 2021 16:15:59 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (21 commits) replay: fix icount request when replaying clock access event_notifier: Set ->initialized earlier in event_notifier_init() hvf: Fetch cr4 before evaluating CPUID(1) target/i386/hvf: add rdmsr 35H MSR_CORE_THREAD_COUNT hvf: x86: Remove unused definitions target/i386/hvf: add vmware-cpuid-freq cpu feature hvf: Guard xgetbv call util/cutils: Skip "." when looking for next directory component tests/qtest/qos-test: dump QEMU command if verbose tests/qtest/qos-test: dump environment variables if verbose tests/qtest/qos-test: dump qos graph if verbose libqos/qgraph_internal: add qos_printf() and qos_printf_literal() libqos/qgraph: add qos_node_create_driver_named() sev/i386: Enable an SEV-ES guest based on SEV policy kvm/i386: Use a per-VM check for SMM capability sev/i386: Don't allow a system reset under an SEV-ES guest sev/i386: Allow AP booting under SEV-ES sev/i386: Require in-kernel irqchip support for SEV-ES guests sev/i386: Add initial support for SEV-ES sev: update sev-inject-launch-secret to make gpa optional ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * sev/i386: Don't allow a system reset under an SEV-ES guestTom Lendacky2021-02-161-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An SEV-ES guest does not allow register state to be altered once it has been measured. When an SEV-ES guest issues a reboot command, Qemu will reset the vCPU state and resume the guest. This will cause failures under SEV-ES. Prevent that from occuring by introducing an arch-specific callback that returns a boolean indicating whether vCPUs are resettable. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: David Hildenbrand <david@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com> Message-Id: <1ac39c441b9a3e970e9556e1cc29d0a0814de6fd.1611682609.git.thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | target/arm: Enable MTE for user-onlyRichard Henderson2021-02-161-0/+15
| | | | | | | | | | | | | | Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-31-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | target/arm: Add allocation tag storage for user modeRichard Henderson2021-02-161-2/+27
| | | | | | | | | | | | | | | | | | | | Use the now-saved PAGE_ANON and PAGE_MTE bits, and the per-page saved data. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-30-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | linux-user/aarch64: Signal SEGV_MTEAERR for async tag check errorRichard Henderson2021-02-161-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The real kernel collects _TIF_MTE_ASYNC_FAULT into the current thread's state on any kernel entry (interrupt, exception etc), and then delivers the signal in advance of resuming the thread. This means that while the signal won't be delivered immediately, it will not be delayed forever -- at minimum it will be delivered after the next clock interrupt. We don't have a clock interrupt in linux-user, so we issue a cpu_kick to signal a return to the main loop at the end of the current TB. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | linux-user/aarch64: Pass syndrome to EXC_*_ABORTRichard Henderson2021-02-161-6/+9
| | | | | | | | | | | | | | | | | | | | A proper syndrome is required to fill in the proper si_code. Use page_get_flags to determine permission vs translation for user-only. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | target/arm: Split out syndrome.h from internals.hRichard Henderson2021-02-162-244/+274
| | | | | | | | | | | | | | | | | | | | | | Move everything related to syndromes to a new file, which can be shared with linux-user. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210212184902.1251044-26-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | linux-user/aarch64: Implement PROT_MTERichard Henderson2021-02-161-0/+1
| | | | | | | | | | | | | | | | | | | | Remember the PROT_MTE bit as PAGE_MTE/PAGE_TARGET_2. Otherwise this does not yet have effect. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | target/arm: Use the proper TBI settings for linux-userRichard Henderson2021-02-162-9/+5Star
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We were fudging TBI1 enabled to speed up the generated code. Now that we've improved the code generation, remove this. Also, tidy the comment to reflect the current code. The pauth test was testing a kernel address (-1) and making incorrect assumptions about TBI1; stick to userland addresses. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | target/arm: Improve gen_top_byte_ignoreRichard Henderson2021-02-161-11/+14
| | | | | | | | | | | | | | | | | | | | Use simple arithmetic instead of a conditional move when tbi0 != tbi1. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLERichard Henderson2021-02-162-0/+34
| | | | | | | | | | | | | | | | | | | | | | This is the prctl bit that controls whether syscalls accept tagged addresses. See Documentation/arm64/tagged-address-abi.rst in the linux kernel. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | exec: Use cpu_untagged_addr in g2h; split out g2h_untaggedRichard Henderson2021-02-161-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | Use g2h_untagged in contexts that have no cpu, e.g. the binary loaders that operate before the primary cpu is created. As a colollary, target_mmap and friends must use untagged addresses, since they are used by the loaders. Use g2h_untagged on values returned from target_mmap, as the kernel never applies a tag itself. Use g2h_untagged on all pc values. The only current user of tags, aarch64, removes tags from code addresses upon branch, so "pc" is always untagged. Use g2h with the cpu context on hand wherever possible. Use g2h_untagged in lock_user, which will be updated soon. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Correctly initialize MDCR_EL2.HPMNDaniel Müller2021-02-111-5/+4Star
| | | | | | | | | | | | | | | | | | | | When working with performance monitoring counters, we look at MDCR_EL2.HPMN as part of the check whether a counter is enabled. This check fails, because MDCR_EL2.HPMN is reset to 0, meaning that no counters are "enabled" for < EL2. That's in violation of the Arm specification, which states that > On a Warm reset, this field [MDCR_EL2.HPMN] resets to the value in > PMCR_EL0.N That's also what a comment in the code acknowledges, but the necessary adjustment seems to have been forgotten when support for more counters was added. This change fixes the issue by setting the reset value to PMCR.N, which is four. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Set ID_PFR0.DIT to 1 for "max" 32-bit CPURebecca Cran2021-02-111-0/+4
| | | | | | | | | Enable FEAT_DIT for the "max" 32-bit CPU. Signed-off-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210208065700.19454-5-rebecca@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Set ID_AA64PFR0.DIT and ID_PFR0.DIT to 1 for "max" AA64 CPURebecca Cran2021-02-111-0/+5
| | | | | | | | | Enable FEAT_DIT for the "max" AARCH64 CPU. Signed-off-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210208065700.19454-4-rebecca@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Support AA32 DIT by moving PSTATE_SS from cpsr into env->pstateRebecca Cran2021-02-113-18/+42
| | | | | | | | | | | | | cpsr has been treated as being the same as spsr, but it isn't. Since PSTATE_SS isn't in cpsr, remove it and move it into env->pstate. This allows us to add support for CPSR_DIT, adding helper functions to merge SPSR_ELx to and from CPSR. Signed-off-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210208065700.19454-3-rebecca@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Add support for FEAT_DIT, Data Independent TimingRebecca Cran2021-02-114-0/+52
| | | | | | | | | | | | Add support for FEAT_DIT. DIT (Data Independent Timing) is a required feature for ARMv8.4. Since virtual machine execution is largely nondeterministic and TCG is outside of the security domain, it's implemented as a NOP. Signed-off-by: Rebecca Cran <rebecca@nuviainc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210208065700.19454-2-rebecca@nuviainc.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Fix SCR RES1 handlingMike Nawrocki2021-02-112-2/+19
| | | | | | | | | | | | | | | | The FW and AW bits of SCR_EL3 are RES1 only in some contexts. Force them to 1 only when there is no support for AArch32 at EL1 or above. The reset value will be 0x30 only if the CPU is AArch64-only; if there is support for AArch32 at EL1 or above, it will be reset to 0. Also adds helper function isar_feature_aa64_aa32_el1 to check if AArch32 is supported at EL1 or above. Signed-off-by: Mike Nawrocki <michael.nawrocki@gtri.gatech.edu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210203165552.16306-2-michael.nawrocki@gtri.gatech.edu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/arm: Don't migrate CPUARMState.featuresAaron Lindsay2021-02-111-1/+1
| | | | | | | | | | | | | | | As feature flags are added or removed, the meanings of bits in the `features` field can change between QEMU versions, causing migration failures. Additionally, migrating the field is not useful because it is a constant function of the CPU being used. Fixes: LP:1914696 Signed-off-by: Aaron Lindsay <aaron@os.amperecomputing.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Tested-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* cpu: tcg_ops: move to tcg-cpu-ops.h, keep a pointer in CPUClassClaudio Fontana2021-02-054-24/+58
| | | | | | | | | | | | | | | | | | | we cannot in principle make the TCG Operations field definitions conditional on CONFIG_TCG in code that is included by both common_ss and specific_ss modules. Therefore, what we can do safely to restrict the TCG fields to TCG-only builds, is to move all tcg cpu operations into a separate header file, which is only included by TCG, target-specific code. This leaves just a NULL pointer in the cpu.h for the non-TCG builds. This also tidies up the code in all targets a bit, having all TCG cpu operations neatly contained by a dedicated data struct. Signed-off-by: Claudio Fontana <cfontana@suse.de> Message-Id: <20210204163931.7358-16-cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* cpu: move debug_check_watchpoint to tcg_opsClaudio Fontana2021-02-051-2/+2
| | | | | | | | | | | | | commit 568496c0c0f1 ("cpu: Add callback to check architectural") and commit 3826121d9298 ("target-arm: Implement checking of fired") introduced an ARM-specific hack for cpu_check_watchpoint. Make debug_check_watchpoint optional, and move it to tcg_ops. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210204163931.7358-15-cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* cpu: move adjust_watchpoint_address to tcg_opsClaudio Fontana2021-02-051-1/+1
| | | | | | | | | | | | | | commit 40612000599e ("arm: Correctly handle watchpoints for BE32 CPUs") introduced this ARM-specific, TCG-specific hack to adjust the address, before checking it with cpu_check_watchpoint. Make adjust_watchpoint_address optional and move it to tcg_ops. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210204163931.7358-14-cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* cpu: move do_unaligned_access to tcg_opsClaudio Fontana2021-02-051-1/+1
| | | | | | | | | | | | | | make it consistently SOFTMMU-only. Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [claudio: make the field presence in cpu.h unconditional, removing the ifdefs] Message-Id: <20210204163931.7358-12-cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* cpu: move cc->transaction_failed to tcg_opsClaudio Fontana2021-02-051-2/+2
| | | | | | | | | | | | | | | Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [claudio: wrap target code around CONFIG_TCG and !CONFIG_USER_ONLY] avoiding its use in headers used by common_ss code (should be poisoned). Note: need to be careful with the use of CONFIG_USER_ONLY, Message-Id: <20210204163931.7358-11-cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* cpu: move cc->do_interrupt to tcg_opsClaudio Fontana2021-02-052-7/+6Star
| | | | | | | | Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210204163931.7358-10-cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* target/arm: do not use cc->do_interrupt for KVM directlyClaudio Fontana2021-02-052-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cc->do_interrupt is in theory a TCG callback used in accel/tcg only, to prepare the emulated architecture to take an interrupt as defined in the hardware specifications, but in reality the _do_interrupt style of functions in targets are also occasionally reused by KVM to prepare the architecture state in a similar way where userspace code has identified that it needs to deliver an exception to the guest. In the case of ARM, that includes: 1) the vcpu thread got a SIGBUS indicating a memory error, and we need to deliver a Synchronous External Abort to the guest to let it know about the error. 2) the kernel told us about a debug exception (breakpoint, watchpoint) but it is not for one of QEMU's own gdbstub breakpoints/watchpoints so it must be a breakpoint the guest itself has set up, therefore we need to deliver it to the guest. So in order to reuse code, the same arm_do_interrupt function is used. This is all fine, but we need to avoid calling it using the callback registered in CPUClass, since that one is now TCG-only. Fortunately this is easily solved by replacing calls to CPUClass::do_interrupt() with explicit calls to arm_do_interrupt(). Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210204163931.7358-9-cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* cpu: Move debug_excp_handler to tcg_opsEduardo Habkost2021-02-051-1/+1
| | | | | | | | | Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210204163931.7358-8-cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* cpu: Move tlb_fill to tcg_opsEduardo Habkost2021-02-051-1/+1
| | | | | | | | | | | | [claudio: wrapped target code in CONFIG_TCG] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210204163931.7358-7-cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3-55-g7522 (git 2.39.0) at 2024-12-18 08:59:51 +0100