Merge commit 'v2.6.37-rc1' into kbuild/kbuild

0 files changed, 0 insertions, 0 deletions
diff --git a/CREDITS b/CREDITS
index 72b487869788..41d8e63d5165 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3554,12 +3554,12 @@ E: cvance@nai.com
 D: portions of the Linux Security Module (LSM) framework and security modules
 
 N: Petr Vandrovec
-E: vandrove@vc.cvut.cz
+E: petr@vandrovec.name
 D: Small contributions to ncpfs
 D: Matrox framebuffer driver
-S: Chudenicka 8
-S: 10200 Prague 10, Hostivar
-S: Czech Republic
+S: 21513 Conradia Ct
+S: Cupertino, CA 95014
+S: USA
 
 N: Thibaut Varene
 E: T-Bone@parisc-linux.org
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 5405f7aecefc..8dfc6708a257 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -130,8 +130,6 @@ edac.txt
 	- information on EDAC - Error Detection And Correction
 eisa.txt
 	- info on EISA bus support.
-exception.txt
-	- how Linux v2.2 handles exceptions without verify_area etc.
 fault-injection/
 	- dir with docs about the fault injection capabilities infrastructure.
 fb/
@@ -234,6 +232,8 @@ memory.txt
 	- info on typical Linux memory problems.
 mips/
 	- directory with info about Linux on MIPS architecture.
+mmc/
+	- directory with info about the MMC subsystem
 mono.txt
 	- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
 mutex-design.txt
diff --git a/Documentation/ABI/obsolete/dv1394 b/Documentation/ABI/obsolete/dv1394
deleted file mode 100644
index 2ee36864ca10..000000000000
--- a/Documentation/ABI/obsolete/dv1394
+++ /dev/null
@@ -1,9 +0,0 @@
-What:		dv1394 (a.k.a. "OHCI-DV I/O support" for FireWire)
-Contact:	linux1394-devel@lists.sourceforge.net
-Description:
-	New application development should use raw1394 + userspace libraries
-	instead, notably libiec61883 which is functionally equivalent.
-
-Users:
-	ffmpeg/libavformat (used by a variety of media players)
-	dvgrab v1.x (replaced by dvgrab2 on top of raw1394 and resp. libraries)
diff --git a/Documentation/ABI/removed/dv1394 b/Documentation/ABI/removed/dv1394
new file mode 100644
index 000000000000..c2310b6676f4
--- /dev/null
+++ b/Documentation/ABI/removed/dv1394
@@ -0,0 +1,14 @@
+What:		dv1394 (a.k.a. "OHCI-DV I/O support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/dv1394/* were character device files, one for each FireWire
+	controller and for NTSC and PAL respectively, from which DV data
+	could be received by read() or transmitted by write().  A few
+	ioctl()s allowed limited control.
+	This special-purpose interface has been superseded by libraw1394 +
+	libiec61883 which are functionally equivalent, support HDV, and
+	transparently work on top of the newer firewire kernel drivers.
+
+Users:
+	ffmpeg/libavformat (if configured for DV1394)
diff --git a/Documentation/ABI/removed/raw1394 b/Documentation/ABI/removed/raw1394
new file mode 100644
index 000000000000..490aa1efc4ae
--- /dev/null
+++ b/Documentation/ABI/removed/raw1394
@@ -0,0 +1,15 @@
+What:		raw1394 (a.k.a. "Raw IEEE1394 I/O support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/raw1394 was a character device file that allowed low-level
+	access to FireWire buses.  Its major drawbacks were its inability
+	to implement sensible device security policies, and its low level
+	of abstraction that required userspace clients do duplicate much
+	of the kernel's ieee1394 core functionality.
+	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
+	firewire-core.
+
+Users:
+	libraw1394 (works with firewire-cdev too, transparent to library ABI
+	users)
diff --git a/Documentation/ABI/removed/raw1394_legacy_isochronous b/Documentation/ABI/removed/raw1394_legacy_isochronous
deleted file mode 100644
index 1b629622d883..000000000000
--- a/Documentation/ABI/removed/raw1394_legacy_isochronous
+++ /dev/null
@@ -1,16 +0,0 @@
-What:		legacy isochronous ABI of raw1394 (1st generation iso ABI)
-Date:		June 2007 (scheduled), removed in kernel v2.6.23
-Contact:	linux1394-devel@lists.sourceforge.net
-Description:
-	The two request types RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN have
-	been deprecated for quite some time.  They are very inefficient as they
-	come with high interrupt load and several layers of callbacks for each
-	packet.  Because of these deficiencies, the video1394 and dv1394 drivers
-	and the 3rd-generation isochronous ABI in raw1394 (rawiso) were created.
-
-Users:
-	libraw1394 users via the long deprecated API raw1394_iso_write,
-	raw1394_start_iso_write, raw1394_start_iso_rcv, raw1394_stop_iso_rcv
-
-	libdc1394, which optionally uses these old libraw1394 calls
-	alternatively to the more efficient video1394 ABI
diff --git a/Documentation/ABI/removed/video1394 b/Documentation/ABI/removed/video1394
new file mode 100644
index 000000000000..c39c25aee77b
--- /dev/null
+++ b/Documentation/ABI/removed/video1394
@@ -0,0 +1,16 @@
+What:		video1394 (a.k.a. "OHCI-1394 Video support" for FireWire)
+Date:		May 2010 (scheduled), finally removed in kernel v2.6.37
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+	/dev/video1394/* were character device files, one for each FireWire
+	controller, which were used for isochronous I/O.  It was added as an
+	alternative to raw1394's isochronous I/O functionality which had
+	performance issues in its first generation.  Any video1394 user had
+	to use raw1394 + libraw1394 too because video1394 did not provide
+	asynchronous I/O for device discovery and configuration.
+	Replaced by /dev/fw*, i.e. the <linux/firewire-cdev.h> ABI of
+	firewire-core.
+
+Users:
+	libdc1394 (works with firewire-cdev too, transparent to library ABI
+	users)
diff --git a/Documentation/ABI/testing/debugfs-ec b/Documentation/ABI/testing/debugfs-ec
new file mode 100644
index 000000000000..6546115a94da
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-ec
@@ -0,0 +1,20 @@
+What:		/sys/kernel/debug/ec/*/{gpe,use_global_lock,io}
+Date:		July 2010
+Contact:	Thomas Renninger <trenn@suse.de>
+Description:
+
+General information like which GPE is assigned to the EC and whether
+the global lock should get used.
+Knowing the EC GPE one can watch the amount of HW events related to
+the EC here (XY -> GPE number from /sys/kernel/debug/ec/*/gpe):
+/sys/firmware/acpi/interrupts/gpeXY
+
+The io file is binary and a userspace tool located here:
+ftp://ftp.suse.com/pub/people/trenn/sources/ec/
+should get used to read out the 256 Embedded Controller registers
+or writing to them.
+
+CAUTION: Do not write to the Embedded Controller if you don't know
+what you are doing! Rebooting afterwards also is a good idea.
+This can influence the way your machine is cooled and fans may
+not get switched on again after you did a wrong write.
diff --git a/Documentation/ABI/testing/debugfs-kmemtrace b/Documentation/ABI/testing/debugfs-kmemtrace
deleted file mode 100644
index 5e6a92a02d85..000000000000
--- a/Documentation/ABI/testing/debugfs-kmemtrace
+++ /dev/null
@@ -1,71 +0,0 @@
-What:		/sys/kernel/debug/kmemtrace/
-Date:		July 2008
-Contact:	Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
-Description:
-
-In kmemtrace-enabled kernels, the following files are created:
-
-/sys/kernel/debug/kmemtrace/
-	cpu<n>		(0400)	Per-CPU tracing data, see below. (binary)
-	total_overruns	(0400)	Total number of bytes which were dropped from
-				cpu<n> files because of full buffer condition,
-				non-binary. (text)
-	abi_version	(0400)	Kernel's kmemtrace ABI version. (text)
-
-Each per-CPU file should be read according to the relay interface. That is,
-the reader should set affinity to that specific CPU and, as currently done by
-the userspace application (though there are other methods), use poll() with
-an infinite timeout before every read(). Otherwise, erroneous data may be
-read. The binary data has the following _core_ format:
-
-	Event ID	(1 byte)	Unsigned integer, one of:
-		0 - represents an allocation (KMEMTRACE_EVENT_ALLOC)
-		1 - represents a freeing of previously allocated memory
-		    (KMEMTRACE_EVENT_FREE)
-	Type ID		(1 byte)	Unsigned integer, one of:
-		0 - this is a kmalloc() / kfree()
-		1 - this is a kmem_cache_alloc() / kmem_cache_free()
-		2 - this is a __get_free_pages() et al.
-	Event size	(2 bytes)	Unsigned integer representing the
-					size of this event. Used to extend
-					kmemtrace. Discard the bytes you
-					don't know about.
-	Sequence number	(4 bytes)	Signed integer used to reorder data
-					logged on SMP machines. Wraparound
-					must be taken into account, although
-					it is unlikely.
-	Caller address	(8 bytes)	Return address to the caller.
-	Pointer to mem	(8 bytes)	Pointer to target memory area. Can be
-					NULL, but not all such calls might be
-					recorded.
-
-In case of KMEMTRACE_EVENT_ALLOC events, the next fields follow:
-
-	Requested bytes	(8 bytes)	Total number of requested bytes,
-					unsigned, must not be zero.
-	Allocated bytes (8 bytes)	Total number of actually allocated
-					bytes, unsigned, must not be lower
-					than requested bytes.
-	Requested flags	(4 bytes)	GFP flags supplied by the caller.
-	Target CPU	(4 bytes)	Signed integer, valid for event id 1.
-					If equal to -1, target CPU is the same
-					as origin CPU, but the reverse might
-					not be true.
-
-The data is made available in the same endianness the machine has.
-
-Other event ids and type ids may be defined and added. Other fields may be
-added by increasing event size, but see below for details.
-Every modification to the ABI, including new id definitions, are followed
-by bumping the ABI version by one.
-
-Adding new data to the packet (features) is done at the end of the mandatory
-data:
-	Feature size	(2 byte)
-	Feature ID	(1 byte)
-	Feature data	(Feature size - 3 bytes)
-
-
-Users:
-	kmemtrace-user - git://repo.or.cz/kmemtrace-user.git
-
diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata
new file mode 100644
index 000000000000..0a932155cbba
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-ata
@@ -0,0 +1,99 @@
+What:		/sys/class/ata_...
+Date:		August 2008
+Contact:	Gwendal Grignou<gwendal@google.com>
+Description:
+
+Provide a place in sysfs for storing the ATA topology of the system.  This allows
+retrieving various information about ATA objects.
+
+Files under /sys/class/ata_port
+-------------------------------
+
+	For each port, a directory ataX is created where X is the ata_port_id of
+	the port. The device parent is the ata host device.
+
+idle_irq (read)
+
+	Number of IRQ received by the port while idle [some ata HBA only].
+
+nr_pmp_links (read)
+
+	If a SATA Port Multiplier (PM) is connected, number of link behind it.
+
+Files under /sys/class/ata_link
+-------------------------------
+
+	Behind each port, there is a ata_link. If there is a SATA PM in the
+	topology, 15 ata_link objects are created.
+
+	If a link is behind a port, the directory name is linkX, where X is
+	ata_port_id of the port.
+	If a link is behind a PM, its name is linkX.Y where X is ata_port_id
+	of the parent port and Y the PM port.
+
+hw_sata_spd_limit
+
+	Maximum speed supported by the connected SATA device.
+
+sata_spd_limit
+
+	Maximum speed imposed by libata.
+
+sata_spd
+
+	Current speed of the link [1.5, 3Gps,...].
+
+Files under /sys/class/ata_device
+---------------------------------
+
+	Behind each link, up to two ata device are created.
+	The name of the directory is devX[.Y].Z where:
+	- X is ata_port_id of the port where the device is connected,
+	- Y the port of the PM if any, and
+	- Z the device id: for PATA, there is usually 2 devices [0,1],
+	only 1 for SATA.
+
+class
+	Device class. Can be "ata" for disk, "atapi" for packet device,
+	"pmp" for PM, or "none" if no device was found behind the link.
+
+dma_mode
+
+	Transfer modes supported by the device when in DMA mode.
+	Mostly used by PATA device.
+
+pio_mode
+
+	Transfer modes supported by the device when in PIO mode.
+	Mostly used by PATA device.
+
+xfer_mode
+
+	Current transfer mode.
+
+id
+
+	Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17.
+	Only valid if the device is not a PM.
+
+gscr
+
+	Cached result of the dump of PM GSCR register.
+	Valid registers are:
+	0: 	SATA_PMP_GSCR_PROD_ID,
+	1: 	SATA_PMP_GSCR_REV,
+	2: 	SATA_PMP_GSCR_PORT_INFO,
+	32:	SATA_PMP_GSCR_ERROR,
+	33:	SATA_PMP_GSCR_ERROR_EN,
+	64:	SATA_PMP_GSCR_FEAT,
+	96:	SATA_PMP_GSCR_FEAT_EN,
+	130:	SATA_PMP_GSCR_SII_GPIO
+	Only valid if the device is a PM.
+
+spdn_cnt
+
+	Number of time libata decided to lower the speed of link due to errors.
+
+ering
+
+	Formatted output of the error ring of the device.
diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram
new file mode 100644
index 000000000000..c8b3b48ec62c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-block-zram
@@ -0,0 +1,99 @@
+What:		/sys/block/zram<id>/disksize
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The disksize file is read-write and specifies the disk size
+		which represents the limit on the *uncompressed* worth of data
+		that can be stored in this disk.
+
+What:		/sys/block/zram<id>/initstate
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The disksize file is read-only and shows the initialization
+		state of the device.
+
+What:		/sys/block/zram<id>/reset
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The disksize file is write-only and allows resetting the
+		device. The reset operation frees all the memory assocaited
+		with this device.
+
+What:		/sys/block/zram<id>/num_reads
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The num_reads file is read-only and specifies the number of
+		reads (failed or successful) done on this device.
+
+What:		/sys/block/zram<id>/num_writes
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The num_writes file is read-only and specifies the number of
+		writes (failed or successful) done on this device.
+
+What:		/sys/block/zram<id>/invalid_io
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The invalid_io file is read-only and specifies the number of
+		non-page-size-aligned I/O requests issued to this device.
+
+What:		/sys/block/zram<id>/notify_free
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The notify_free file is read-only and specifies the number of
+		swap slot free notifications received by this device. These
+		notifications are send to a swap block device when a swap slot
+		is freed. This statistic is applicable only when this disk is
+		being used as a swap disk.
+
+What:		/sys/block/zram<id>/discard
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The discard file is read-only and specifies the number of
+		discard requests received by this device. These requests
+		provide information to block device regarding blocks which are
+		no longer used by filesystem.
+
+What:		/sys/block/zram<id>/zero_pages
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The zero_pages file is read-only and specifies number of zero
+		filled pages written to this disk. No memory is allocated for
+		such pages.
+
+What:		/sys/block/zram<id>/orig_data_size
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The orig_data_size file is read-only and specifies uncompressed
+		size of data stored in this disk. This excludes zero-filled
+		pages (zero_pages) since no memory is allocated for them.
+		Unit: bytes
+
+What:		/sys/block/zram<id>/compr_data_size
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The compr_data_size file is read-only and specifies compressed
+		size of data stored in this disk. So, compression ratio can be
+		calculated using orig_data_size and this statistic.
+		Unit: bytes
+
+What:		/sys/block/zram<id>/mem_used_total
+Date:		August 2010
+Contact:	Nitin Gupta <ngupta@vflare.org>
+Description:
+		The mem_used_total file is read-only and specifies the amount
+		of memory, including allocator fragmentation and metadata
+		overhead, allocated for this disk. So, allocator space
+		efficiency can be calculated using compr_data_size and this
+		statistic.
+		Unit: bytes
+\ No newline at end of file
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352
new file mode 100644
index 000000000000..feb2e4a87075
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352
@@ -0,0 +1,21 @@
+Where:		/sys/bus/i2c/devices/.../heading0_input
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Reports the current heading from the compass as a floating
+		point value in degrees.
+
+Where:		/sys/bus/i2c/devices/.../power_state
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Sets the power state of the device. 0 sets the device into
+		sleep mode, 1 wakes it up.
+
+Where:		/sys/bus/i2c/devices/.../calibration
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Sets the calibration on or off (1 = on, 0 = off). See the
+		chip data sheet.
+
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 25be3250f7d6..f979d825d112 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -139,3 +139,30 @@ Contact:	linux-pci@vger.kernel.org
 Description:
 		This symbolic link points to the PCI hotplug controller driver
 		module that manages the hotplug slot.
+
+What:		/sys/bus/pci/devices/.../label
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given name(SMBIOS type 41 string) of the PCI device.
+		The attribute will be created only if the firmware
+		has given a name to the PCI device.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned name of the PCI device.
+
+What:		/sys/bus/pci/devices/.../index
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given instance(SMBIOS type 41 device type instance)
+		of the PCI device. The attribute will be created
+		only if the firmware has given a device type instance
+		to the PCI device.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned device type instance of the PCI
+		device that can help in understanding the firmware
+		intended order of the PCI device.
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index aba7d989208c..7405de26ee60 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -7,7 +7,7 @@ Description:
 		added or removed dynamically to represent hot-add/remove
 		operations.
 Users:		hotplug memory add/remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
 
 What:		/sys/devices/system/memory/memoryX/removable
 Date:		June 2008
@@ -19,7 +19,7 @@ Description:
 		identify removable sections of the memory before attempting
 		potentially expensive hot-remove memory operation
 Users:		hotplug memory remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils	
 
 What:		/sys/devices/system/memory/memoryX/phys_device
 Date:		September 2008
@@ -58,7 +58,7 @@ Description:
 		by root to offline that section.
 		# echo offline > /sys/devices/system/memory/memory22/state
 Users:		hotplug memory remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
 
 
 What:		/sys/devices/system/memoryX/nodeY
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
index 34034027b13c..d548eaac230a 100644
--- a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
+++ b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
@@ -7,3 +7,15 @@ Description:
 		0 -> resumed
 
 		(_UDC_ is the name of the USB Device Controller driver)
+
+What:           /sys/devices/platform/_UDC_/gadget/gadget-lunX/nofua
+Date:           July 2010
+Contact:        Andy Shevchenko <andy.shevchenko@gmail.com>
+Description:
+		Show or set the reaction on the FUA (Force Unit Access) bit in
+		the SCSI WRITE(10,12) commands when a gadget in USB Mass
+		Storage mode.
+
+		Possible values are:
+			1 -> ignore the FUA flag
+			0 -> obey the FUA flag
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 6123c523bfd7..7628cd1bc36a 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -77,3 +77,91 @@ Description:
 		devices this attribute is set to "enabled" by bus type code or
 		device drivers and in that cases it should be safe to leave the
 		default value.
+
+What:		/sys/devices/.../power/wakeup_count
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_count attribute contains the number
+		of signaled wakeup events associated with the device.  This
+		attribute is read-only.  If the device is not enabled to wake up
+		the system from sleep states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_active_count
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_active_count attribute contains the
+		number of times the processing of wakeup events associated with
+		the device was completed (at the kernel level).  This attribute
+		is read-only.  If the device is not enabled to wake up the
+		system from sleep states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_hit_count
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_hit_count attribute contains the
+		number of times the processing of a wakeup event associated with
+		the device might prevent the system from entering a sleep state.
+		This attribute is read-only.  If the device is not enabled to
+		wake up the system from sleep states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_active
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_active attribute contains either 1,
+		or 0, depending on whether or not a wakeup event associated with
+		the device is being processed (1).  This attribute is read-only.
+		If the device is not enabled to wake up the system from sleep
+		states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_total_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_total_time_ms attribute contains
+		the total time of processing wakeup events associated with the
+		device, in milliseconds.  This attribute is read-only.  If the
+		device is not enabled to wake up the system from sleep states,
+		this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_max_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_max_time_ms attribute contains
+		the maximum time of processing a single wakeup event associated
+		with the device, in milliseconds.  This attribute is read-only.
+		If the device is not enabled to wake up the system from sleep
+		states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_last_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../wakeup_last_time_ms attribute contains
+		the value of the monotonic clock corresponding to the time of
+		signaling the last wakeup event associated with the device, in
+		milliseconds.  This attribute is read-only.  If the device is
+		not enabled to wake up the system from sleep states, this
+		attribute is empty.
+
+What:		/sys/devices/.../power/autosuspend_delay_ms
+Date:		September 2010
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		The /sys/devices/.../power/autosuspend_delay_ms attribute
+		contains the autosuspend delay value (in milliseconds).  Some
+		drivers do not want their device to suspend as soon as it
+		becomes idle at run time; they want the device to remain
+		inactive for a certain minimum period of time first.  That
+		period is called the autosuspend delay.  Negative values will
+		prevent the device from being suspended at run time (similar
+		to writing "on" to the power/control attribute).  Values >=
+		1000 will cause the autosuspend timer expiration to be rounded
+		up to the nearest second.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		attempts to read or write it will yield I/O errors.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 84a710f87c64..7564e88bfa43 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -197,7 +197,7 @@ Description:	These files exist in every cpu's cache index directories.
 		Currently, only AMD Family 10h Processors support cache index
 		disable, and only for their L3 caches.  See the BIOS and
 		Kernel Developer's Guide at
-		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+		http://support.amd.com/us/Embedded_TechDocs/31116-Public-GH-BKDG_3-28_5-28-09.pdf	
 		for formatting information and other details on the
 		cache index disable.
 Users:    joachim.deguara@amd.com
diff --git a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
new file mode 100644
index 000000000000..b82deeaec314
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
@@ -0,0 +1,22 @@
+What:           state
+Date:           Sep 2010
+KernelVersion:  2.6.37
+Contact:        Vernon Mauery <vernux@us.ibm.com>
+Description:    The state file allows a means by which to change in and
+                out of Premium Real-Time Mode (PRTM), as well as the
+                ability to query the current state.
+                    0 => PRTM off
+                    1 => PRTM enabled
+Users:          The ibm-prtm userspace daemon uses this interface.
+
+
+What:           version
+Date:           Sep 2010
+KernelVersion:  2.6.37
+Contact:        Vernon Mauery <vernux@us.ibm.com>
+Description:    The version file provides a means by which to query
+                the RTL table version that lives in the Extended
+                BIOS Data Area (EBDA).
+Users:          The ibm-prtm userspace daemon uses this interface.
+
+
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
index 88340a23ce91..063bda7fe707 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -33,19 +33,6 @@ Description:	When read, this file returns the raw integer version number of the
 		left. E.g. a returned value of 138 means 1.38
 		This file is readonly.
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/kone_driver_version
-Date:		March 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns the driver version.
-		The format of the string is "v<major>.<minor>.<patchlevel>".
-		This attribute is used by the userland tools to find the sysfs-
-		paths of installed kone-mice and determine the capabilites of
-		the driver. Versions of this driver for old kernels replace
-		usbhid instead of generic-usb. The way to scan for this file
-		has been chosen to provide a consistent way for all supported
-		kernel versions.
-		This file is readonly.
-
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]
 Date:		March 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
new file mode 100644
index 000000000000..ad1125b02ff4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra
@@ -0,0 +1,98 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_cpi
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	It is possible to switch the cpi setting of the mouse with the
+		press of a button.
+		When read, this file returns the raw number of the actual cpi
+		setting reported by the mouse. This number has to be further
+		processed to receive the real dpi value.
+
+		VALUE DPI
+		1     400
+		2     800
+		4     1600
+
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the number of the actual profile in
+		range 0-4.
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 138 means 1.38
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds informations like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 13 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		This file is writeonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds informations like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 13 bytes in size.
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds informations about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 19 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		This file is writeonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds informations about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 19 bytes in size.
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+		This file is readonly.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the settings stored in the mouse.
+		The size of the data is 3 bytes and holds information on the
+		startup_profile.
+		When written, this file lets write settings back to the mouse.
+		The data has to be 3 bytes long. The mouse will reject invalid
+		data.
diff --git a/Documentation/ABI/testing/sysfs-i2c-bmp085 b/Documentation/ABI/testing/sysfs-i2c-bmp085
new file mode 100644
index 000000000000..585962ad0465
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-i2c-bmp085
@@ -0,0 +1,31 @@
+What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/pressure0_input
+Date:		June 2010
+Contact:	Christoph Mair <christoph.mair@gmail.com>
+Description:	Start a pressure measurement and read the result. Values
+		represent the ambient air pressure in pascal (0.01 millibar).
+
+		Reading: returns the current air pressure.
+
+
+What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/temp0_input
+Date:		June 2010
+Contact:	Christoph Mair <christoph.mair@gmail.com>
+Description:	Measure the ambient temperature. The returned value represents
+		the ambient temperature in units of 0.1 degree celsius.
+
+		Reading: returns the current temperature.
+
+
+What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/oversampling
+Date:		June 2010
+Contact:	Christoph Mair <christoph.mair@gmail.com>
+Description:	Tell the bmp085 to use more samples to calculate a pressure
+		value. When writing to this file the chip will use 2^x samples
+		to calculate the next pressure value with x being the value
+		written. Using this feature will decrease RMS noise and
+		increase the measurement time.
+
+		Reading: returns the current oversampling setting.
+
+		Writing: sets a new oversampling setting.
+		Accepted values: 0..3.
diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module
new file mode 100644
index 000000000000..cfcec3bffc0a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-module
@@ -0,0 +1,12 @@
+What:		/sys/module/pch_phub/drivers/.../pch_mac
+Date:		August 2010
+KernelVersion:	2.6.35
+Contact:	masa-korg@dsn.okisemi.com
+Description:	Write/read GbE MAC address.
+
+What:		/sys/module/pch_phub/drivers/.../pch_firmware
+Date:		August 2010
+KernelVersion:	2.6.35
+Contact:	masa-korg@dsn.okisemi.com
+Description:	Write/read Option ROM data.
+
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index d6a801f45b48..194ca446ac28 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -99,9 +99,38 @@ Description:
 
 		dmesg -s 1000000 | grep 'hash matches'
 
+		If you do not get any matches (or they appear to be false
+		positives), it is possible that the last PM event point
+		referred to a device created by a loadable kernel module.  In
+		this case cat /sys/power/pm_trace_dev_match (see below) after
+		your system is started up and the kernel modules are loaded.
+
 		CAUTION: Using it will cause your machine's real-time (CMOS)
 		clock to be set to a random invalid time after a resume.
 
+What;		/sys/power/pm_trace_dev_match
+Date:		October 2010
+Contact:	James Hogan <james@albanarts.com>
+Description:
+		The /sys/power/pm_trace_dev_match file contains the name of the
+		device associated with the last PM event point saved in the RTC
+		across reboots when pm_trace has been used.  More precisely it
+		contains the list of current devices (including those
+		registered by loadable kernel modules since boot) which match
+		the device hash in the RTC at boot, with a newline after each
+		one.
+
+		The advantage of this file over the hash matches printed to the
+		kernel log (see /sys/power/pm_trace), is that it includes
+		devices created after boot by loadable kernel modules.
+
+		Due to the small hash size necessary to fit in the RTC, it is
+		possible that more than one device matches the hash, in which
+		case further investigation is required to determine which
+		device is causing the problem.  Note that genuine RTC clock
+		values (such as when pm_trace has not been used), can still
+		match a device and output it's name here.
+
 What:		/sys/power/pm_async
 Date:		January 2009
 Contact:	Rafael J. Wysocki <rjw@sisk.pl>
@@ -114,3 +143,18 @@ Description:
 		if this file contains "1", which is the default.  It may be
 		disabled by writing "0" to this file, in which case all devices
 		will be suspended and resumed synchronously.
+
+What:		/sys/power/wakeup_count
+Date:		July 2010
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/wakeup_count file allows user space to put the
+		system into a sleep state while taking into account the
+		concurrent arrival of wakeup events.  Reading from it returns
+		the current number of registered wakeup events and it blocks if
+		some wakeup events are being processed at the time the file is
+		read from.  Writing to it will only succeed if the current
+		number of wakeup events is equal to the written value and, if
+		successful, will make the kernel abort a subsequent transition
+		to a sleep state if any wakeup events are reported after the
+		write has returned.
diff --git a/Documentation/Changes b/Documentation/Changes
index eca9f6e6fbe6..4fb88f15f2ef 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -331,7 +331,7 @@ o  <ftp://ftp.kernel.org/pub/linux/kernel/people/rusty/modules/>
 
 Mkinitrd
 --------
-o  <ftp://rawhide.redhat.com/pub/rawhide/SRPMS/SRPMS/>
+o  <https://code.launchpad.net/initrd-tools/main>
 
 E2fsprogs
 ---------
@@ -343,11 +343,11 @@ o  <http://jfs.sourceforge.net/>
 
 Reiserfsprogs
 -------------
-o  <http://www.namesys.com/pub/reiserfsprogs/reiserfsprogs-3.6.3.tar.gz>
+o  <http://www.kernel.org/pub/linux/utils/fs/reiserfs/>
 
 Xfsprogs
 --------
-o  <ftp://oss.sgi.com/projects/xfs/download/>
+o  <ftp://oss.sgi.com/projects/xfs/>
 
 Pcmciautils
 -----------
@@ -387,18 +387,18 @@ o <http://sourceforge.net/projects/fuse>
 
 mcelog
 ------
-o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/mcelog/>
+o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/>
 
 Networking
 **********
 
 PPP
 ---
-o  <ftp://ftp.samba.org/pub/ppp/ppp-2.4.0.tar.gz>
+o  <ftp://ftp.samba.org/pub/ppp/>
 
 Isdn4k-utils
 ------------
-o  <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/isdn4k-utils.v3.1pre1.tar.gz>
+o  <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/>
 
 NFS-utils
 ---------
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt
index 98ce51796f71..d568bc235bc0 100644
--- a/Documentation/DMA-API-HOWTO.txt
+++ b/Documentation/DMA-API-HOWTO.txt
@@ -738,21 +738,31 @@ to "Closing".
    CONFIG_NEED_SG_DMA_LENGTH if the architecture supports IOMMUs
    (including software IOMMU).
 
-2) ARCH_KMALLOC_MINALIGN
+2) ARCH_DMA_MINALIGN
 
    Architectures must ensure that kmalloc'ed buffer is
    DMA-safe. Drivers and subsystems depend on it. If an architecture
    isn't fully DMA-coherent (i.e. hardware doesn't ensure that data in
    the CPU cache is identical to data in main memory),
-   ARCH_KMALLOC_MINALIGN must be set so that the memory allocator
+   ARCH_DMA_MINALIGN must be set so that the memory allocator
    makes sure that kmalloc'ed buffer doesn't share a cache line with
    the others. See arch/arm/include/asm/cache.h as an example.
 
-   Note that ARCH_KMALLOC_MINALIGN is about DMA memory alignment
+   Note that ARCH_DMA_MINALIGN is about DMA memory alignment
    constraints. You don't need to worry about the architecture data
    alignment constraints (e.g. the alignment constraints about 64-bit
    objects).
 
+3) Supporting multiple types of IOMMUs
+
+   If your architecture needs to support multiple types of IOMMUs, you
+   can use include/linux/asm-generic/dma-mapping-common.h. It's a
+   library to support the DMA API with multiple types of IOMMUs. Lots
+   of architectures (x86, powerpc, sh, alpha, ia64, microblaze and
+   sparc) use it. Choose one to see how it can be used. If you need to
+   support multiple types of IOMMUs in a single system, the example of
+   x86 or powerpc helps.
+
 			   Closing
 
 This document, and the API itself, would not be in its current
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 05e2ae236865..fe2326906610 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -456,12 +456,6 @@ be identical to those passed in (and returned by
 dma_alloc_noncoherent()).
 
 int
-dma_is_consistent(struct device *dev, dma_addr_t dma_handle)
-
-Returns true if the device dev is performing consistent DMA on the memory
-area pointed to by the dma_handle.
-
-int
 dma_get_cache_alignment(void)
 
 Returns the processor cache alignment.  This is the absolute minimum
diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
new file mode 100644
index 000000000000..19a1210c2530
--- /dev/null
+++ b/Documentation/DocBook/80211.tmpl
@@ -0,0 +1,495 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE set PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+<set>
+  <setinfo>
+    <title>The 802.11 subsystems &ndash; for kernel developers</title>
+    <subtitle>
+      Explaining wireless 802.11 networking in the Linux kernel
+    </subtitle>
+
+    <copyright>
+      <year>2007-2009</year>
+      <holder>Johannes Berg</holder>
+    </copyright>
+
+    <authorgroup>
+      <author>
+        <firstname>Johannes</firstname>
+        <surname>Berg</surname>
+        <affiliation>
+          <address><email>johannes@sipsolutions.net</email></address>
+        </affiliation>
+      </author>
+    </authorgroup>
+
+    <legalnotice>
+      <para>
+        This documentation is free software; you can redistribute
+        it and/or modify it under the terms of the GNU General Public
+        License version 2 as published by the Free Software Foundation.
+      </para>
+      <para>
+        This documentation is distributed in the hope that it will be
+        useful, but WITHOUT ANY WARRANTY; without even the implied
+        warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+        See the GNU General Public License for more details.
+      </para>
+      <para>
+        You should have received a copy of the GNU General Public
+        License along with this documentation; if not, write to the Free
+        Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+        MA 02111-1307 USA
+      </para>
+      <para>
+        For more details see the file COPYING in the source
+        distribution of Linux.
+      </para>
+    </legalnotice>
+
+    <abstract>
+      <para>
+        These books attempt to give a description of the
+        various subsystems that play a role in 802.11 wireless
+        networking in Linux. Since these books are for kernel
+        developers they attempts to document the structures
+        and functions used in the kernel as well as giving a
+        higher-level overview.
+      </para>
+      <para>
+	The reader is expected to be familiar with the 802.11
+	standard as published by the IEEE in 802.11-2007 (or
+	possibly later versions). References to this standard
+	will be given as "802.11-2007 8.1.5".
+      </para>
+    </abstract>
+  </setinfo>
+  <book id="cfg80211-developers-guide">
+    <bookinfo>
+      <title>The cfg80211 subsystem</title>
+
+      <abstract>
+!Pinclude/net/cfg80211.h Introduction
+      </abstract>
+    </bookinfo>
+      <chapter>
+      <title>Device registration</title>
+!Pinclude/net/cfg80211.h Device registration
+!Finclude/net/cfg80211.h ieee80211_band
+!Finclude/net/cfg80211.h ieee80211_channel_flags
+!Finclude/net/cfg80211.h ieee80211_channel
+!Finclude/net/cfg80211.h ieee80211_rate_flags
+!Finclude/net/cfg80211.h ieee80211_rate
+!Finclude/net/cfg80211.h ieee80211_sta_ht_cap
+!Finclude/net/cfg80211.h ieee80211_supported_band
+!Finclude/net/cfg80211.h cfg80211_signal_type
+!Finclude/net/cfg80211.h wiphy_params_flags
+!Finclude/net/cfg80211.h wiphy_flags
+!Finclude/net/cfg80211.h wiphy
+!Finclude/net/cfg80211.h wireless_dev
+!Finclude/net/cfg80211.h wiphy_new
+!Finclude/net/cfg80211.h wiphy_register
+!Finclude/net/cfg80211.h wiphy_unregister
+!Finclude/net/cfg80211.h wiphy_free
+
+!Finclude/net/cfg80211.h wiphy_name
+!Finclude/net/cfg80211.h wiphy_dev
+!Finclude/net/cfg80211.h wiphy_priv
+!Finclude/net/cfg80211.h priv_to_wiphy
+!Finclude/net/cfg80211.h set_wiphy_dev
+!Finclude/net/cfg80211.h wdev_priv
+      </chapter>
+      <chapter>
+      <title>Actions and configuration</title>
+!Pinclude/net/cfg80211.h Actions and configuration
+!Finclude/net/cfg80211.h cfg80211_ops
+!Finclude/net/cfg80211.h vif_params
+!Finclude/net/cfg80211.h key_params
+!Finclude/net/cfg80211.h survey_info_flags
+!Finclude/net/cfg80211.h survey_info
+!Finclude/net/cfg80211.h beacon_parameters
+!Finclude/net/cfg80211.h plink_actions
+!Finclude/net/cfg80211.h station_parameters
+!Finclude/net/cfg80211.h station_info_flags
+!Finclude/net/cfg80211.h rate_info_flags
+!Finclude/net/cfg80211.h rate_info
+!Finclude/net/cfg80211.h station_info
+!Finclude/net/cfg80211.h monitor_flags
+!Finclude/net/cfg80211.h mpath_info_flags
+!Finclude/net/cfg80211.h mpath_info
+!Finclude/net/cfg80211.h bss_parameters
+!Finclude/net/cfg80211.h ieee80211_txq_params
+!Finclude/net/cfg80211.h cfg80211_crypto_settings
+!Finclude/net/cfg80211.h cfg80211_auth_request
+!Finclude/net/cfg80211.h cfg80211_assoc_request
+!Finclude/net/cfg80211.h cfg80211_deauth_request
+!Finclude/net/cfg80211.h cfg80211_disassoc_request
+!Finclude/net/cfg80211.h cfg80211_ibss_params
+!Finclude/net/cfg80211.h cfg80211_connect_params
+!Finclude/net/cfg80211.h cfg80211_pmksa
+!Finclude/net/cfg80211.h cfg80211_send_rx_auth
+!Finclude/net/cfg80211.h cfg80211_send_auth_timeout
+!Finclude/net/cfg80211.h __cfg80211_auth_canceled
+!Finclude/net/cfg80211.h cfg80211_send_rx_assoc
+!Finclude/net/cfg80211.h cfg80211_send_assoc_timeout
+!Finclude/net/cfg80211.h cfg80211_send_deauth
+!Finclude/net/cfg80211.h __cfg80211_send_deauth
+!Finclude/net/cfg80211.h cfg80211_send_disassoc
+!Finclude/net/cfg80211.h __cfg80211_send_disassoc
+!Finclude/net/cfg80211.h cfg80211_ibss_joined
+!Finclude/net/cfg80211.h cfg80211_connect_result
+!Finclude/net/cfg80211.h cfg80211_roamed
+!Finclude/net/cfg80211.h cfg80211_disconnected
+!Finclude/net/cfg80211.h cfg80211_ready_on_channel
+!Finclude/net/cfg80211.h cfg80211_remain_on_channel_expired
+!Finclude/net/cfg80211.h cfg80211_new_sta
+!Finclude/net/cfg80211.h cfg80211_rx_mgmt
+!Finclude/net/cfg80211.h cfg80211_mgmt_tx_status
+!Finclude/net/cfg80211.h cfg80211_cqm_rssi_notify
+!Finclude/net/cfg80211.h cfg80211_michael_mic_failure
+      </chapter>
+      <chapter>
+      <title>Scanning and BSS list handling</title>
+!Pinclude/net/cfg80211.h Scanning and BSS list handling
+!Finclude/net/cfg80211.h cfg80211_ssid
+!Finclude/net/cfg80211.h cfg80211_scan_request
+!Finclude/net/cfg80211.h cfg80211_scan_done
+!Finclude/net/cfg80211.h cfg80211_bss
+!Finclude/net/cfg80211.h cfg80211_inform_bss_frame
+!Finclude/net/cfg80211.h cfg80211_inform_bss
+!Finclude/net/cfg80211.h cfg80211_unlink_bss
+!Finclude/net/cfg80211.h cfg80211_find_ie
+!Finclude/net/cfg80211.h ieee80211_bss_get_ie
+      </chapter>
+      <chapter>
+      <title>Utility functions</title>
+!Pinclude/net/cfg80211.h Utility functions
+!Finclude/net/cfg80211.h ieee80211_channel_to_frequency
+!Finclude/net/cfg80211.h ieee80211_frequency_to_channel
+!Finclude/net/cfg80211.h ieee80211_get_channel
+!Finclude/net/cfg80211.h ieee80211_get_response_rate
+!Finclude/net/cfg80211.h ieee80211_hdrlen
+!Finclude/net/cfg80211.h ieee80211_get_hdrlen_from_skb
+!Finclude/net/cfg80211.h ieee80211_radiotap_iterator
+      </chapter>
+      <chapter>
+      <title>Data path helpers</title>
+!Pinclude/net/cfg80211.h Data path helpers
+!Finclude/net/cfg80211.h ieee80211_data_to_8023
+!Finclude/net/cfg80211.h ieee80211_data_from_8023
+!Finclude/net/cfg80211.h ieee80211_amsdu_to_8023s
+!Finclude/net/cfg80211.h cfg80211_classify8021d
+      </chapter>
+      <chapter>
+      <title>Regulatory enforcement infrastructure</title>
+!Pinclude/net/cfg80211.h Regulatory enforcement infrastructure
+!Finclude/net/cfg80211.h regulatory_hint
+!Finclude/net/cfg80211.h wiphy_apply_custom_regulatory
+!Finclude/net/cfg80211.h freq_reg_info
+      </chapter>
+      <chapter>
+      <title>RFkill integration</title>
+!Pinclude/net/cfg80211.h RFkill integration
+!Finclude/net/cfg80211.h wiphy_rfkill_set_hw_state
+!Finclude/net/cfg80211.h wiphy_rfkill_start_polling
+!Finclude/net/cfg80211.h wiphy_rfkill_stop_polling
+      </chapter>
+      <chapter>
+      <title>Test mode</title>
+!Pinclude/net/cfg80211.h Test mode
+!Finclude/net/cfg80211.h cfg80211_testmode_alloc_reply_skb
+!Finclude/net/cfg80211.h cfg80211_testmode_reply
+!Finclude/net/cfg80211.h cfg80211_testmode_alloc_event_skb
+!Finclude/net/cfg80211.h cfg80211_testmode_event
+      </chapter>
+  </book>
+  <book id="mac80211-developers-guide">
+    <bookinfo>
+      <title>The mac80211 subsystem</title>
+      <abstract>
+!Pinclude/net/mac80211.h Introduction
+!Pinclude/net/mac80211.h Warning
+      </abstract>
+    </bookinfo>
+
+    <toc></toc>
+
+  <!--
+  Generally, this document shall be ordered by increasing complexity.
+  It is important to note that readers should be able to read only
+  the first few sections to get a working driver and only advanced
+  usage should require reading the full document.
+  -->
+
+    <part>
+      <title>The basic mac80211 driver interface</title>
+      <partintro>
+        <para>
+          You should read and understand the information contained
+          within this part of the book while implementing a driver.
+          In some chapters, advanced usage is noted, that may be
+          skipped at first.
+        </para>
+        <para>
+          This part of the book only covers station and monitor mode
+          functionality, additional information required to implement
+          the other modes is covered in the second part of the book.
+        </para>
+      </partintro>
+
+      <chapter id="basics">
+        <title>Basic hardware handling</title>
+        <para>TBD</para>
+        <para>
+          This chapter shall contain information on getting a hw
+          struct allocated and registered with mac80211.
+        </para>
+        <para>
+          Since it is required to allocate rates/modes before registering
+          a hw struct, this chapter shall also contain information on setting
+          up the rate/mode structs.
+        </para>
+        <para>
+          Additionally, some discussion about the callbacks and
+          the general programming model should be in here, including
+          the definition of ieee80211_ops which will be referred to
+          a lot.
+        </para>
+        <para>
+          Finally, a discussion of hardware capabilities should be done
+          with references to other parts of the book.
+        </para>
+  <!-- intentionally multiple !F lines to get proper order -->
+!Finclude/net/mac80211.h ieee80211_hw
+!Finclude/net/mac80211.h ieee80211_hw_flags
+!Finclude/net/mac80211.h SET_IEEE80211_DEV
+!Finclude/net/mac80211.h SET_IEEE80211_PERM_ADDR
+!Finclude/net/mac80211.h ieee80211_ops
+!Finclude/net/mac80211.h ieee80211_alloc_hw
+!Finclude/net/mac80211.h ieee80211_register_hw
+!Finclude/net/mac80211.h ieee80211_get_tx_led_name
+!Finclude/net/mac80211.h ieee80211_get_rx_led_name
+!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
+!Finclude/net/mac80211.h ieee80211_get_radio_led_name
+!Finclude/net/mac80211.h ieee80211_unregister_hw
+!Finclude/net/mac80211.h ieee80211_free_hw
+      </chapter>
+
+      <chapter id="phy-handling">
+        <title>PHY configuration</title>
+        <para>TBD</para>
+        <para>
+          This chapter should describe PHY handling including
+          start/stop callbacks and the various structures used.
+        </para>
+!Finclude/net/mac80211.h ieee80211_conf
+!Finclude/net/mac80211.h ieee80211_conf_flags
+      </chapter>
+
+      <chapter id="iface-handling">
+        <title>Virtual interfaces</title>
+        <para>TBD</para>
+        <para>
+          This chapter should describe virtual interface basics
+          that are relevant to the driver (VLANs, MGMT etc are not.)
+          It should explain the use of the add_iface/remove_iface
+          callbacks as well as the interface configuration callbacks.
+        </para>
+        <para>Things related to AP mode should be discussed there.</para>
+        <para>
+          Things related to supporting multiple interfaces should be
+          in the appropriate chapter, a BIG FAT note should be here about
+          this though and the recommendation to allow only a single
+          interface in STA mode at first!
+        </para>
+!Finclude/net/mac80211.h ieee80211_vif
+      </chapter>
+
+      <chapter id="rx-tx">
+        <title>Receive and transmit processing</title>
+        <sect1>
+          <title>what should be here</title>
+          <para>TBD</para>
+          <para>
+            This should describe the receive and transmit
+            paths in mac80211/the drivers as well as
+            transmit status handling.
+          </para>
+        </sect1>
+        <sect1>
+          <title>Frame format</title>
+!Pinclude/net/mac80211.h Frame format
+        </sect1>
+        <sect1>
+          <title>Packet alignment</title>
+!Pnet/mac80211/rx.c Packet alignment
+        </sect1>
+        <sect1>
+          <title>Calling into mac80211 from interrupts</title>
+!Pinclude/net/mac80211.h Calling mac80211 from interrupts
+        </sect1>
+        <sect1>
+          <title>functions/definitions</title>
+!Finclude/net/mac80211.h ieee80211_rx_status
+!Finclude/net/mac80211.h mac80211_rx_flags
+!Finclude/net/mac80211.h ieee80211_tx_info
+!Finclude/net/mac80211.h ieee80211_rx
+!Finclude/net/mac80211.h ieee80211_rx_irqsafe
+!Finclude/net/mac80211.h ieee80211_tx_status
+!Finclude/net/mac80211.h ieee80211_tx_status_irqsafe
+!Finclude/net/mac80211.h ieee80211_rts_get
+!Finclude/net/mac80211.h ieee80211_rts_duration
+!Finclude/net/mac80211.h ieee80211_ctstoself_get
+!Finclude/net/mac80211.h ieee80211_ctstoself_duration
+!Finclude/net/mac80211.h ieee80211_generic_frame_duration
+!Finclude/net/mac80211.h ieee80211_wake_queue
+!Finclude/net/mac80211.h ieee80211_stop_queue
+!Finclude/net/mac80211.h ieee80211_wake_queues
+!Finclude/net/mac80211.h ieee80211_stop_queues
+        </sect1>
+      </chapter>
+
+      <chapter id="filters">
+        <title>Frame filtering</title>
+!Pinclude/net/mac80211.h Frame filtering
+!Finclude/net/mac80211.h ieee80211_filter_flags
+      </chapter>
+    </part>
+
+    <part id="advanced">
+      <title>Advanced driver interface</title>
+      <partintro>
+        <para>
+         Information contained within this part of the book is
+         of interest only for advanced interaction of mac80211
+         with drivers to exploit more hardware capabilities and
+         improve performance.
+        </para>
+      </partintro>
+
+      <chapter id="hardware-crypto-offload">
+        <title>Hardware crypto acceleration</title>
+!Pinclude/net/mac80211.h Hardware crypto acceleration
+  <!-- intentionally multiple !F lines to get proper order -->
+!Finclude/net/mac80211.h set_key_cmd
+!Finclude/net/mac80211.h ieee80211_key_conf
+!Finclude/net/mac80211.h ieee80211_key_flags
+      </chapter>
+
+      <chapter id="powersave">
+        <title>Powersave support</title>
+!Pinclude/net/mac80211.h Powersave support
+      </chapter>
+
+      <chapter id="beacon-filter">
+        <title>Beacon filter support</title>
+!Pinclude/net/mac80211.h Beacon filter support
+!Finclude/net/mac80211.h ieee80211_beacon_loss
+      </chapter>
+
+      <chapter id="qos">
+        <title>Multiple queues and QoS support</title>
+        <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_tx_queue_params
+      </chapter>
+
+      <chapter id="AP">
+        <title>Access point mode support</title>
+        <para>TBD</para>
+        <para>Some parts of the if_conf should be discussed here instead</para>
+        <para>
+          Insert notes about VLAN interfaces with hw crypto here or
+          in the hw crypto chapter.
+        </para>
+!Finclude/net/mac80211.h ieee80211_get_buffered_bc
+!Finclude/net/mac80211.h ieee80211_beacon_get
+      </chapter>
+
+      <chapter id="multi-iface">
+        <title>Supporting multiple virtual interfaces</title>
+        <para>TBD</para>
+        <para>
+          Note: WDS with identical MAC address should almost always be OK
+        </para>
+        <para>
+          Insert notes about having multiple virtual interfaces with
+          different MAC addresses here, note which configurations are
+          supported by mac80211, add notes about supporting hw crypto
+          with it.
+        </para>
+      </chapter>
+
+      <chapter id="hardware-scan-offload">
+        <title>Hardware scan offload</title>
+        <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_scan_completed
+      </chapter>
+    </part>
+
+    <part id="rate-control">
+      <title>Rate control interface</title>
+      <partintro>
+        <para>TBD</para>
+        <para>
+         This part of the book describes the rate control algorithm
+         interface and how it relates to mac80211 and drivers.
+        </para>
+      </partintro>
+      <chapter id="dummy">
+        <title>dummy chapter</title>
+        <para>TBD</para>
+      </chapter>
+    </part>
+
+    <part id="internal">
+      <title>Internals</title>
+      <partintro>
+        <para>TBD</para>
+        <para>
+         This part of the book describes mac80211 internals.
+        </para>
+      </partintro>
+
+      <chapter id="key-handling">
+        <title>Key handling</title>
+        <sect1>
+          <title>Key handling basics</title>
+!Pnet/mac80211/key.c Key handling basics
+        </sect1>
+        <sect1>
+          <title>MORE TBD</title>
+          <para>TBD</para>
+        </sect1>
+      </chapter>
+
+      <chapter id="rx-processing">
+        <title>Receive processing</title>
+        <para>TBD</para>
+      </chapter>
+
+      <chapter id="tx-processing">
+        <title>Transmit processing</title>
+        <para>TBD</para>
+      </chapter>
+
+      <chapter id="sta-info">
+        <title>Station info handling</title>
+        <sect1>
+          <title>Programming information</title>
+!Fnet/mac80211/sta_info.h sta_info
+!Fnet/mac80211/sta_info.h ieee80211_sta_info_flags
+        </sect1>
+        <sect1>
+          <title>STA information lifetime rules</title>
+!Pnet/mac80211/sta_info.c STA information lifetime rules
+        </sect1>
+      </chapter>
+
+      <chapter id="synchronisation">
+        <title>Synchronisation</title>
+        <para>TBD</para>
+        <para>Locking, lots of RCU</para>
+      </chapter>
+    </part>
+  </book>
+</set>
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index c7e5dc7e8cb3..8b6e00a71034 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -12,7 +12,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
+	    80211.xml debugobjects.xml sh.xml regulator.xml \
 	    alsa-driver-api.xml writing-an-alsa-driver.xml \
 	    tracepoint.xml media.xml drm.xml
 
@@ -35,7 +35,7 @@ PS_METHOD	= $(prefer-db2x)
 PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs xmldoclinks
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
-xmldocs: $(BOOKS) xmldoclinks
+xmldocs: $(BOOKS)
 sgmldocs: xmldocs
 
 PS := $(patsubst %.xml, %.ps, $(BOOKS))
@@ -45,7 +45,7 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS))
 pdfdocs: $(PDF)
 
 HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
-htmldocs: $(HTML)
+htmldocs: $(HTML) xmldoclinks
 	$(call build_main_index)
 	$(call build_images)
 
@@ -95,7 +95,7 @@ define rule_docproc
         ) > $(dir $@).$(notdir $@).cmd
 endef
 
-%.xml: %.tmpl FORCE
+%.xml: %.tmpl xmldoclinks FORCE
 	$(call if_changed_rule,docproc)
 
 ###
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 1b2dd4fc3db2..22edcbb9ddaf 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -46,14 +46,18 @@
 
      <sect1><title>Atomic and pointer manipulation</title>
 !Iarch/x86/include/asm/atomic.h
-!Iarch/x86/include/asm/unaligned.h
      </sect1>
 
      <sect1><title>Delaying, scheduling, and timer routines</title>
 !Iinclude/linux/sched.h
 !Ekernel/sched.c
+!Iinclude/linux/completion.h
 !Ekernel/timer.c
      </sect1>
+     <sect1><title>Wait queues and Wake events</title>
+!Iinclude/linux/wait.h
+!Ekernel/wait.c
+     </sect1>
      <sect1><title>High-resolution timers</title>
 !Iinclude/linux/ktime.h
 !Iinclude/linux/hrtimer.h
@@ -111,6 +115,7 @@ X!Edrivers/base/attribute_container.c
 <!--
 X!Edrivers/base/interface.c
 -->
+!Iinclude/linux/platform_device.h
 !Edrivers/base/platform.c
 !Edrivers/base/bus.c
      </sect1>
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index 910c923a9b86..2861055afd7a 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -136,6 +136,7 @@
 #ifdef CONFIG_COMPAT
 		.compat_ioctl = i915_compat_ioctl,
 #endif
+		.llseek = noop_llseek,
 		},
 	.pci_driver = {
 		.name = DRIVER_NAME,
diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/dvb/dvbapi.xml
index 63c528fee624..e3a97fdd62a6 100644
--- a/Documentation/DocBook/dvb/dvbapi.xml
+++ b/Documentation/DocBook/dvb/dvbapi.xml
@@ -12,10 +12,12 @@
 <othername role="mi">O. C.</othername>
 <affiliation><address><email>rjkm@metzlerbros.de</email></address></affiliation>
 </author>
+</authorgroup>
+<authorgroup>
 <author>
 <firstname>Mauro</firstname>
-<surname>Chehab</surname>
 <othername role="mi">Carvalho</othername>
+<surname>Chehab</surname>
 <affiliation><address><email>mchehab@redhat.com</email></address></affiliation>
 <contrib>Ported document to Docbook XML.</contrib>
 </author>
@@ -23,13 +25,24 @@
 <copyright>
 	<year>2002</year>
 	<year>2003</year>
-	<year>2009</year>
 	<holder>Convergence GmbH</holder>
 </copyright>
+<copyright>
+	<year>2009-2010</year>
+	<holder>Mauro Carvalho Chehab</holder>
+</copyright>
 
 <revhistory>
 <!-- Put document revisions here, newest first. -->
 <revision>
+	<revnumber>2.0.3</revnumber>
+	<date>2010-07-03</date>
+	<authorinitials>mcc</authorinitials>
+	<revremark>
+		Add some frontend capabilities flags, present on kernel, but missing at the specs.
+	</revremark>
+</revision>
+<revision>
 	<revnumber>2.0.2</revnumber>
 	<date>2009-10-25</date>
 	<authorinitials>mcc</authorinitials>
@@ -63,7 +76,7 @@ Added ISDB-T test originally written by Patrick Boettcher
 
 
 <title>LINUX DVB API</title>
-<subtitle>Version 3</subtitle>
+<subtitle>Version 5.2</subtitle>
 <!-- ADD THE CHAPTERS HERE -->
   <chapter id="dvb_introdution">
     &sub-intro;
diff --git a/Documentation/DocBook/dvb/frontend.h.xml b/Documentation/DocBook/dvb/frontend.h.xml
index b99644f5340a..d08e0d401418 100644
--- a/Documentation/DocBook/dvb/frontend.h.xml
+++ b/Documentation/DocBook/dvb/frontend.h.xml
@@ -63,6 +63,7 @@ typedef enum fe_caps {
         FE_CAN_8VSB                     = 0x200000,
         FE_CAN_16VSB                    = 0x400000,
         FE_HAS_EXTENDED_CAPS            = 0x800000,   /* We need more bitspace for newer APIs, indicate this. */
+        FE_CAN_TURBO_FEC                = 0x8000000,  /* frontend supports "turbo fec modulation" */
         FE_CAN_2G_MODULATION            = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
         FE_NEEDS_BENDING                = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
         FE_CAN_RECOVER                  = 0x40000000, /* frontend can recover from a cable unplug automatically */
diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml
index 300ba1f04177..78d756de5906 100644
--- a/Documentation/DocBook/dvb/frontend.xml
+++ b/Documentation/DocBook/dvb/frontend.xml
@@ -64,8 +64,14 @@ a specific frontend type.</para>
 	FE_CAN_BANDWIDTH_AUTO         = 0x40000,
 	FE_CAN_GUARD_INTERVAL_AUTO    = 0x80000,
 	FE_CAN_HIERARCHY_AUTO         = 0x100000,
-	FE_CAN_MUTE_TS                = 0x80000000,
-	FE_CAN_CLEAN_SETUP            = 0x40000000
+	FE_CAN_8VSB                   = 0x200000,
+	FE_CAN_16VSB                  = 0x400000,
+	FE_HAS_EXTENDED_CAPS          = 0x800000,
+	FE_CAN_TURBO_FEC              = 0x8000000,
+	FE_CAN_2G_MODULATION          = 0x10000000,
+	FE_NEEDS_BENDING              = 0x20000000,
+	FE_CAN_RECOVER                = 0x40000000,
+	FE_CAN_MUTE_TS                = 0x80000000
 	} fe_caps_t;
 </programlisting>
 </section>
diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index 1448b33fd222..fb10fd08c05c 100644
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -28,7 +28,7 @@
   </authorgroup>
 
   <copyright>
-   <year>2005-2006</year>
+   <year>2005-2010</year>
    <holder>Thomas Gleixner</holder>
   </copyright>
   <copyright>
@@ -100,6 +100,10 @@
 	  <listitem><para>Edge type</para></listitem>
 	  <listitem><para>Simple type</para></listitem>
 	</itemizedlist>
+	During the implementation we identified another type:
+	<itemizedlist>
+	  <listitem><para>Fast EOI type</para></listitem>
+	</itemizedlist>
 	In the SMP world of the __do_IRQ() super-handler another type
 	was identified:
 	<itemizedlist>
@@ -153,6 +157,7 @@
 	is still available. This leads to a kind of duality for the time
 	being. Over time the new model should be used in more and more
 	architectures, as it enables smaller and cleaner IRQ subsystems.
+	It's deprecated for three years now and about to be removed.
 	</para>
   </chapter>
   <chapter id="bugs">
@@ -217,6 +222,7 @@
 	  <itemizedlist>
 	  <listitem><para>handle_level_irq</para></listitem>
 	  <listitem><para>handle_edge_irq</para></listitem>
+	  <listitem><para>handle_fasteoi_irq</para></listitem>
 	  <listitem><para>handle_simple_irq</para></listitem>
 	  <listitem><para>handle_percpu_irq</para></listitem>
 	  </itemizedlist>
@@ -233,33 +239,33 @@
 		are used by the default flow implementations.
 		The following helper functions are implemented (simplified excerpt):
 		<programlisting>
-default_enable(irq)
+default_enable(struct irq_data *data)
 {
-	desc->chip->unmask(irq);
+	desc->chip->irq_unmask(data);
 }
 
-default_disable(irq)
+default_disable(struct irq_data *data)
 {
-	if (!delay_disable(irq))
-		desc->chip->mask(irq);
+	if (!delay_disable(data))
+		desc->chip->irq_mask(data);
 }
 
-default_ack(irq)
+default_ack(struct irq_data *data)
 {
-	chip->ack(irq);
+	chip->irq_ack(data);
 }
 
-default_mask_ack(irq)
+default_mask_ack(struct irq_data *data)
 {
-	if (chip->mask_ack) {
-		chip->mask_ack(irq);
+	if (chip->irq_mask_ack) {
+		chip->irq_mask_ack(data);
 	} else {
-		chip->mask(irq);
-		chip->ack(irq);
+		chip->irq_mask(data);
+		chip->irq_ack(data);
 	}
 }
 
-noop(irq)
+noop(struct irq_data *data))
 {
 }
 
@@ -278,12 +284,27 @@ noop(irq)
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-desc->chip->start();
+desc->chip->irq_mask();
 handle_IRQ_event(desc->action);
-desc->chip->end();
+desc->chip->irq_unmask();
 		</programlisting>
 		</para>
-   	    </sect3>
+	    </sect3>
+	    <sect3 id="Default_FASTEOI_IRQ_flow_handler">
+		<title>Default Fast EOI IRQ flow handler</title>
+		<para>
+		handle_fasteoi_irq provides a generic implementation
+		for interrupts, which only need an EOI at the end of
+		the handler
+		</para>
+		<para>
+		The following control flow is implemented (simplified excerpt):
+		<programlisting>
+handle_IRQ_event(desc->action);
+desc->chip->irq_eoi();
+		</programlisting>
+		</para>
+	    </sect3>
 	    <sect3 id="Default_Edge_IRQ_flow_handler">
 	 	<title>Default Edge IRQ flow handler</title>
 		<para>
@@ -294,20 +315,19 @@ desc->chip->end();
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
 if (desc->status &amp; running) {
-	desc->chip->hold();
+	desc->chip->irq_mask();
 	desc->status |= pending | masked;
 	return;
 }
-desc->chip->start();
+desc->chip->irq_ack();
 desc->status |= running;
 do {
 	if (desc->status &amp; masked)
-		desc->chip->enable();
+		desc->chip->irq_unmask();
 	desc->status &amp;= ~pending;
 	handle_IRQ_event(desc->action);
 } while (status &amp; pending);
 desc->status &amp;= ~running;
-desc->chip->end();
 		</programlisting>
 		</para>
    	    </sect3>
@@ -342,9 +362,9 @@ handle_IRQ_event(desc->action);
 		<para>
 		The following control flow is implemented (simplified excerpt):
 		<programlisting>
-desc->chip->start();
 handle_IRQ_event(desc->action);
-desc->chip->end();
+if (desc->chip->irq_eoi)
+        desc->chip->irq_eoi();
 		</programlisting>
 		</para>
    	    </sect3>
@@ -375,8 +395,7 @@ desc->chip->end();
 	mechanism. (It's necessary to enable CONFIG_HARDIRQS_SW_RESEND when
 	you want to use the delayed interrupt disable feature and your
 	hardware is not capable of retriggering	an interrupt.)
-	The delayed interrupt disable can be runtime enabled, per interrupt,
-	by setting the IRQ_DELAYED_DISABLE flag in the irq_desc status field.
+	The delayed interrupt disable is not configurable.
 	</para>
 	</sect2>
     </sect1>
@@ -387,13 +406,13 @@ desc->chip->end();
 	contains all the direct chip relevant functions, which
 	can be utilized by the irq flow implementations.
 	  <itemizedlist>
-	  <listitem><para>ack()</para></listitem>
-	  <listitem><para>mask_ack() - Optional, recommended for performance</para></listitem>
-	  <listitem><para>mask()</para></listitem>
-	  <listitem><para>unmask()</para></listitem>
-	  <listitem><para>retrigger() - Optional</para></listitem>
-	  <listitem><para>set_type() - Optional</para></listitem>
-	  <listitem><para>set_wake() - Optional</para></listitem>
+	  <listitem><para>irq_ack()</para></listitem>
+	  <listitem><para>irq_mask_ack() - Optional, recommended for performance</para></listitem>
+	  <listitem><para>irq_mask()</para></listitem>
+	  <listitem><para>irq_unmask()</para></listitem>
+	  <listitem><para>irq_retrigger() - Optional</para></listitem>
+	  <listitem><para>irq_set_type() - Optional</para></listitem>
+	  <listitem><para>irq_set_wake() - Optional</para></listitem>
 	  </itemizedlist>
 	These primitives are strictly intended to mean what they say: ack means
 	ACK, masking means masking of an IRQ line, etc. It is up to the flow
@@ -458,6 +477,7 @@ desc->chip->end();
      <para>
      This chapter contains the autogenerated documentation of the internal functions.
      </para>
+!Ikernel/irq/irqdesc.c
 !Ikernel/irq/handle.c
 !Ikernel/irq/chip.c
   </chapter>
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 44b3def961a2..7160652a8736 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -57,7 +57,6 @@
      </para>
 
      <sect1><title>String Conversions</title>
-!Ilib/vsprintf.c
 !Elib/vsprintf.c
      </sect1>
      <sect1><title>String Manipulation</title>
@@ -94,6 +93,12 @@ X!Ilib/string.c
 !Elib/crc32.c
 !Elib/crc-ccitt.c
      </sect1>
+
+     <sect1 id="idr"><title>idr/ida Functions</title>
+!Pinclude/linux/idr.h idr sync
+!Plib/idr.c IDA description
+!Elib/idr.c
+     </sect1>
   </chapter>
 
   <chapter id="mm">
@@ -132,7 +137,6 @@ X!Ilib/string.c
      <title>FIFO Buffer</title>
      <sect1><title>kfifo interface</title>
 !Iinclude/linux/kfifo.h
-!Ekernel/kfifo.c
      </sect1>
   </chapter>
 
@@ -259,7 +263,8 @@ X!Earch/x86/kernel/mca_32.c
 !Iblock/blk-sysfs.c
 !Eblock/blk-settings.c
 !Eblock/blk-exec.c
-!Eblock/blk-barrier.c
+!Eblock/blk-flush.c
+!Eblock/blk-lib.c
 !Eblock/blk-tag.c
 !Iblock/blk-tag.c
 !Eblock/blk-integrity.c
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 084f6ad7b7a0..f66f4df18690 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -1645,7 +1645,9 @@ the amount of locking which needs to be done.
       all the readers who were traversing the list when we deleted the
       element are finished.  We use <function>call_rcu()</function> to
       register a callback which will actually destroy the object once
-      the readers are finished.
+      all pre-existing readers are finished.  Alternatively,
+      <function>synchronize_rcu()</function> may be used to block until
+      all pre-existing are finished.
     </para>
     <para>
       But how does Read Copy Update know when the readers are
@@ -1714,7 +1716,7 @@ the amount of locking which needs to be done.
 -        object_put(obj);
 +        list_del_rcu(&amp;obj-&gt;list);
          cache_num--;
-+        call_rcu(&amp;obj-&gt;rcu, cache_delete_rcu, obj);
++        call_rcu(&amp;obj-&gt;rcu, cache_delete_rcu);
  }
 
  /* Must be holding cache_lock */
@@ -1725,14 +1727,6 @@ the amount of locking which needs to be done.
          if (++cache_num > MAX_CACHE_SIZE) {
                  struct object *i, *outcast = NULL;
                  list_for_each_entry(i, &amp;cache, list) {
-@@ -85,6 +94,7 @@
-         obj-&gt;popularity = 0;
-         atomic_set(&amp;obj-&gt;refcnt, 1); /* The cache holds a reference */
-         spin_lock_init(&amp;obj-&gt;lock);
-+        INIT_RCU_HEAD(&amp;obj-&gt;rcu);
-
-         spin_lock_irqsave(&amp;cache_lock, flags);
-         __cache_add(obj);
 @@ -104,12 +114,11 @@
  struct object *cache_find(int id)
  {
@@ -1922,9 +1916,12 @@ machines due to caching.
       <function>mutex_lock()</function>
       </para>
       <para>
-       There is a <function>mutex_trylock()</function> which can be
-       used inside interrupt context, as it will not sleep.
+       There is a <function>mutex_trylock()</function> which does not
+       sleep.  Still, it must not be used inside interrupt context since
+       its implementation is not safe for that.
        <function>mutex_unlock()</function> will also never sleep.
+       It cannot be used in interrupt context either since a mutex
+       must be released by the same task that acquired it.
       </para>
      </listitem>
     </itemizedlist>
@@ -1958,6 +1955,12 @@ machines due to caching.
    </sect1>
   </chapter>
 
+  <chapter id="apiref">
+   <title>Mutex API reference</title>
+!Iinclude/linux/mutex.h
+!Ekernel/mutex.c
+  </chapter>
+
   <chapter id="references">
    <title>Further reading</title>
 
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 55f12ac37acd..d71b57fcf116 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -199,10 +199,33 @@
    may be configured as a kernel built-in or a kernel loadable module.
    You can only make use of <constant>kgdbwait</constant> and early
    debugging if you build kgdboc into the kernel as a built-in.
+   <para>Optionally you can elect to activate kms (Kernel Mode
+   Setting) integration.  When you use kms with kgdboc and you have a
+   video driver that has atomic mode setting hooks, it is possible to
+   enter the debugger on the graphics console.  When the kernel
+   execution is resumed, the previous graphics mode will be restored.
+   This integration can serve as a useful tool to aid in diagnosing
+   crashes or doing analysis of memory with kdb while allowing the
+   full graphics console applications to run.
+   </para>
    </para>
    <sect2 id="kgdbocArgs">
    <title>kgdboc arguments</title>
-   <para>Usage: <constant>kgdboc=[kbd][[,]serial_device][,baud]</constant></para>
+   <para>Usage: <constant>kgdboc=[kms][[,]kbd][[,]serial_device][,baud]</constant></para>
+   <para>The order listed above must be observed if you use any of the
+   optional configurations together.
+   </para>
+   <para>Abbreviations:
+   <itemizedlist>
+   <listitem><para>kms = Kernel Mode Setting</para></listitem>
+   <listitem><para>kbd = Keyboard</para></listitem>
+   </itemizedlist>
+   </para>
+   <para>You can configure kgdboc to use the keyboard, and or a serial
+   device depending on if you are using kdb and or kgdb, in one of the
+   following scenarios.  The order listed above must be observed if
+   you use any of the optional configurations together.  Using kms +
+   only gdb is generally not a useful combination.</para>
    <sect3 id="kgdbocArgs1">
    <title>Using loadable module or built-in</title>
    <para>
@@ -212,7 +235,7 @@
    <listitem>
    <para>As a kernel loadable module:</para>
    <para>Use the command: <constant>modprobe kgdboc kgdboc=&lt;tty-device&gt;,[baud]</constant></para>
-   <para>Here are two examples of how you might formate the kgdboc
+   <para>Here are two examples of how you might format the kgdboc
    string. The first is for an x86 target using the first serial port.
    The second example is for the ARM Versatile AB using the second
    serial port.
@@ -240,6 +263,9 @@
    </sect3>
    <sect3 id="kgdbocArgs3">
    <title>More examples</title>
+   <para>You can configure kgdboc to use the keyboard, and or a serial
+   device depending on if you are using kdb and or kgdb, in one of the
+   following scenarios.</para>
    <para>You can configure kgdboc to use the keyboard, and or a serial device
    depending on if you are using kdb and or kgdb, in one of the
    following scenarios.
@@ -255,6 +281,12 @@
    <listitem><para>kdb with a keyboard</para>
    <para><constant>kgdboc=kbd</constant></para>
    </listitem>
+   <listitem><para>kdb with kernel mode setting</para>
+   <para><constant>kgdboc=kms,kbd</constant></para>
+   </listitem>
+   <listitem><para>kdb with kernel mode setting and kgdb over a serial port</para>
+   <para><constant>kgdboc=kms,kbd,ttyS0,115200</constant></para>
+   </listitem>
    </orderedlist>
    </para>
    </sect3>
@@ -637,6 +669,8 @@ Task Addr       Pid   Parent [*] cpu State Thread     Command
       <listitem><para>The logic to perform safe memory reads and writes to memory while using the debugger</para></listitem>
       <listitem><para>A full implementation for software breakpoints unless overridden by the arch</para></listitem>
       <listitem><para>The API to invoke either the kdb or kgdb frontend to the debug core.</para></listitem>
+      <listitem><para>The structures and callback API for atomic kernel mode setting.</para>
+      <para>NOTE: kgdboc is where the kms callbacks are invoked.</para></listitem>
       </itemizedlist>
       </para>
       </listitem>
@@ -676,7 +710,18 @@ Task Addr       Pid   Parent [*] cpu State Thread     Command
         <listitem><para>A simple shell</para></listitem>
         <listitem><para>The kdb core command set</para></listitem>
         <listitem><para>A registration API to register additional kdb shell commands.</para>
-        <para>A good example of a self-contained kdb module is the "ftdump" command for dumping the ftrace buffer.  See: kernel/trace/trace_kdb.c</para></listitem>
+	<itemizedlist>
+        <listitem><para>A good example of a self-contained kdb module
+        is the "ftdump" command for dumping the ftrace buffer.  See:
+        kernel/trace/trace_kdb.c</para></listitem>
+        <listitem><para>For an example of how to dynamically register
+        a new kdb command you can build the kdb_hello.ko kernel module
+        from samples/kdb/kdb_hello.c.  To build this example you can
+        set CONFIG_SAMPLES=y and CONFIG_SAMPLE_KDB=m in your kernel
+        config.  Later run "modprobe kdb_hello" and the next time you
+        enter the kdb shell, you can run the "hello"
+        command.</para></listitem>
+	</itemizedlist></listitem>
         <listitem><para>The implementation for kdb_printf() which
         emits messages directly to I/O drivers, bypassing the kernel
         log.</para></listitem>
@@ -747,6 +792,8 @@ Task Addr       Pid   Parent [*] cpu State Thread     Command
   </sect1>
   <sect1 id="kgdbocDesign">
   <title>kgdboc internals</title>
+  <sect2>
+  <title>kgdboc and uarts</title>
   <para>
   The kgdboc driver is actually a very thin driver that relies on the
   underlying low level to the hardware driver having "polling hooks"
@@ -754,11 +801,8 @@ Task Addr       Pid   Parent [*] cpu State Thread     Command
   implementation of kgdboc it the serial_core was changed to expose a
   low level UART hook for doing polled mode reading and writing of a
   single character while in an atomic context.  When kgdb makes an I/O
-  request to the debugger, kgdboc invokes a call back in the serial
-  core which in turn uses the call back in the UART driver.  It is
-  certainly possible to extend kgdboc to work with non-UART based
-  consoles in the future.
-  </para>
+  request to the debugger, kgdboc invokes a callback in the serial
+  core which in turn uses the callback in the UART driver.</para>
   <para>
   When using kgdboc with a UART, the UART driver must implement two callbacks in the <constant>struct uart_ops</constant>. Example from drivers/8250.c:<programlisting>
 #ifdef CONFIG_CONSOLE_POLL
@@ -772,9 +816,68 @@ Task Addr       Pid   Parent [*] cpu State Thread     Command
   that they can be called from an atomic context and have to restore
   the state of the UART chip on return such that the system can return
   to normal when the debugger detaches.  You need to be very careful
-  with any kind of lock you consider, because failing here is most
+  with any kind of lock you consider, because failing here is most likely
   going to mean pressing the reset button.
   </para>
+  </sect2>
+  <sect2 id="kgdbocKbd">
+  <title>kgdboc and keyboards</title>
+  <para>The kgdboc driver contains logic to configure communications
+  with an attached keyboard.  The keyboard infrastructure is only
+  compiled into the kernel when CONFIG_KDB_KEYBOARD=y is set in the
+  kernel configuration.</para>
+  <para>The core polled keyboard driver driver for PS/2 type keyboards
+  is in drivers/char/kdb_keyboard.c.  This driver is hooked into the
+  debug core when kgdboc populates the callback in the array
+  called <constant>kdb_poll_funcs[]</constant>.  The
+  kdb_get_kbd_char() is the top-level function which polls hardware
+  for single character input.
+  </para>
+  </sect2>
+  <sect2 id="kgdbocKms">
+  <title>kgdboc and kms</title>
+  <para>The kgdboc driver contains logic to request the graphics
+  display to switch to a text context when you are using
+  "kgdboc=kms,kbd", provided that you have a video driver which has a
+  frame buffer console and atomic kernel mode setting support.</para>
+  <para>
+  Every time the kernel
+  debugger is entered it calls kgdboc_pre_exp_handler() which in turn
+  calls con_debug_enter() in the virtual console layer.  On resuming kernel
+  execution, the kernel debugger calls kgdboc_post_exp_handler() which
+  in turn calls con_debug_leave().</para>
+  <para>Any video driver that wants to be compatible with the kernel
+  debugger and the atomic kms callbacks must implement the
+  mode_set_base_atomic, fb_debug_enter and fb_debug_leave operations.
+  For the fb_debug_enter and fb_debug_leave the option exists to use
+  the generic drm fb helper functions or implement something custom for
+  the hardware.  The following example shows the initialization of the
+  .mode_set_base_atomic operation in
+  drivers/gpu/drm/i915/intel_display.c:
+  <informalexample>
+  <programlisting>
+static const struct drm_crtc_helper_funcs intel_helper_funcs = {
+[...]
+        .mode_set_base_atomic = intel_pipe_set_base_atomic,
+[...]
+};
+  </programlisting>
+  </informalexample>
+  </para>
+  <para>Here is an example of how the i915 driver initializes the fb_debug_enter and fb_debug_leave functions to use the generic drm helpers in
+  drivers/gpu/drm/i915/intel_fb.c:
+  <informalexample>
+  <programlisting>
+static struct fb_ops intelfb_ops = {
+[...]
+       .fb_debug_enter = drm_fb_helper_debug_enter,
+       .fb_debug_leave = drm_fb_helper_debug_leave,
+[...]
+};
+  </programlisting>
+  </informalexample>
+  </para>
+  </sect2>
   </sect1>
   </chapter>
   <chapter id="credits">
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
deleted file mode 100644
index affb15a344a1..000000000000
--- a/Documentation/DocBook/mac80211.tmpl
+++ /dev/null
@@ -1,337 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-
-<book id="mac80211-developers-guide">
-  <bookinfo>
-    <title>The mac80211 subsystem for kernel developers</title>
-
-    <authorgroup>
-      <author>
-        <firstname>Johannes</firstname>
-        <surname>Berg</surname>
-        <affiliation>
-          <address><email>johannes@sipsolutions.net</email></address>
-        </affiliation>
-      </author>
-    </authorgroup>
-
-    <copyright>
-      <year>2007-2009</year>
-      <holder>Johannes Berg</holder>
-    </copyright>
-
-    <legalnotice>
-      <para>
-        This documentation is free software; you can redistribute
-        it and/or modify it under the terms of the GNU General Public
-        License version 2 as published by the Free Software Foundation.
-      </para>
-
-      <para>
-        This documentation is distributed in the hope that it will be
-        useful, but WITHOUT ANY WARRANTY; without even the implied
-        warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-        See the GNU General Public License for more details.
-      </para>
-
-      <para>
-        You should have received a copy of the GNU General Public
-        License along with this documentation; if not, write to the Free
-        Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-        MA 02111-1307 USA
-      </para>
-
-      <para>
-        For more details see the file COPYING in the source
-        distribution of Linux.
-      </para>
-    </legalnotice>
-
-    <abstract>
-!Pinclude/net/mac80211.h Introduction
-!Pinclude/net/mac80211.h Warning
-    </abstract>
-  </bookinfo>
-
-  <toc></toc>
-
-<!--
-Generally, this document shall be ordered by increasing complexity.
-It is important to note that readers should be able to read only
-the first few sections to get a working driver and only advanced
-usage should require reading the full document.
--->
-
-  <part>
-    <title>The basic mac80211 driver interface</title>
-    <partintro>
-      <para>
-        You should read and understand the information contained
-        within this part of the book while implementing a driver.
-        In some chapters, advanced usage is noted, that may be
-        skipped at first.
-      </para>
-      <para>
-        This part of the book only covers station and monitor mode
-        functionality, additional information required to implement
-        the other modes is covered in the second part of the book.
-      </para>
-    </partintro>
-
-    <chapter id="basics">
-      <title>Basic hardware handling</title>
-      <para>TBD</para>
-      <para>
-        This chapter shall contain information on getting a hw
-        struct allocated and registered with mac80211.
-      </para>
-      <para>
-        Since it is required to allocate rates/modes before registering
-        a hw struct, this chapter shall also contain information on setting
-        up the rate/mode structs.
-      </para>
-      <para>
-        Additionally, some discussion about the callbacks and
-        the general programming model should be in here, including
-        the definition of ieee80211_ops which will be referred to
-        a lot.
-      </para>
-      <para>
-        Finally, a discussion of hardware capabilities should be done
-        with references to other parts of the book.
-      </para>
-<!-- intentionally multiple !F lines to get proper order -->
-!Finclude/net/mac80211.h ieee80211_hw
-!Finclude/net/mac80211.h ieee80211_hw_flags
-!Finclude/net/mac80211.h SET_IEEE80211_DEV
-!Finclude/net/mac80211.h SET_IEEE80211_PERM_ADDR
-!Finclude/net/mac80211.h ieee80211_ops
-!Finclude/net/mac80211.h ieee80211_alloc_hw
-!Finclude/net/mac80211.h ieee80211_register_hw
-!Finclude/net/mac80211.h ieee80211_get_tx_led_name
-!Finclude/net/mac80211.h ieee80211_get_rx_led_name
-!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
-!Finclude/net/mac80211.h ieee80211_get_radio_led_name
-!Finclude/net/mac80211.h ieee80211_unregister_hw
-!Finclude/net/mac80211.h ieee80211_free_hw
-    </chapter>
-
-    <chapter id="phy-handling">
-      <title>PHY configuration</title>
-      <para>TBD</para>
-      <para>
-        This chapter should describe PHY handling including
-        start/stop callbacks and the various structures used.
-      </para>
-!Finclude/net/mac80211.h ieee80211_conf
-!Finclude/net/mac80211.h ieee80211_conf_flags
-    </chapter>
-
-    <chapter id="iface-handling">
-      <title>Virtual interfaces</title>
-      <para>TBD</para>
-      <para>
-        This chapter should describe virtual interface basics
-        that are relevant to the driver (VLANs, MGMT etc are not.)
-        It should explain the use of the add_iface/remove_iface
-        callbacks as well as the interface configuration callbacks.
-      </para>
-      <para>Things related to AP mode should be discussed there.</para>
-      <para>
-        Things related to supporting multiple interfaces should be
-        in the appropriate chapter, a BIG FAT note should be here about
-        this though and the recommendation to allow only a single
-        interface in STA mode at first!
-      </para>
-!Finclude/net/mac80211.h ieee80211_vif
-    </chapter>
-
-    <chapter id="rx-tx">
-      <title>Receive and transmit processing</title>
-      <sect1>
-        <title>what should be here</title>
-        <para>TBD</para>
-        <para>
-          This should describe the receive and transmit
-          paths in mac80211/the drivers as well as
-          transmit status handling.
-        </para>
-      </sect1>
-      <sect1>
-        <title>Frame format</title>
-!Pinclude/net/mac80211.h Frame format
-      </sect1>
-      <sect1>
-        <title>Packet alignment</title>
-!Pnet/mac80211/rx.c Packet alignment
-      </sect1>
-      <sect1>
-        <title>Calling into mac80211 from interrupts</title>
-!Pinclude/net/mac80211.h Calling mac80211 from interrupts
-      </sect1>
-      <sect1>
-        <title>functions/definitions</title>
-!Finclude/net/mac80211.h ieee80211_rx_status
-!Finclude/net/mac80211.h mac80211_rx_flags
-!Finclude/net/mac80211.h ieee80211_tx_info
-!Finclude/net/mac80211.h ieee80211_rx
-!Finclude/net/mac80211.h ieee80211_rx_irqsafe
-!Finclude/net/mac80211.h ieee80211_tx_status
-!Finclude/net/mac80211.h ieee80211_tx_status_irqsafe
-!Finclude/net/mac80211.h ieee80211_rts_get
-!Finclude/net/mac80211.h ieee80211_rts_duration
-!Finclude/net/mac80211.h ieee80211_ctstoself_get
-!Finclude/net/mac80211.h ieee80211_ctstoself_duration
-!Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_wake_queue
-!Finclude/net/mac80211.h ieee80211_stop_queue
-!Finclude/net/mac80211.h ieee80211_wake_queues
-!Finclude/net/mac80211.h ieee80211_stop_queues
-      </sect1>
-    </chapter>
-
-    <chapter id="filters">
-      <title>Frame filtering</title>
-!Pinclude/net/mac80211.h Frame filtering
-!Finclude/net/mac80211.h ieee80211_filter_flags
-    </chapter>
-  </part>
-
-  <part id="advanced">
-    <title>Advanced driver interface</title>
-    <partintro>
-      <para>
-       Information contained within this part of the book is
-       of interest only for advanced interaction of mac80211
-       with drivers to exploit more hardware capabilities and
-       improve performance.
-      </para>
-    </partintro>
-
-    <chapter id="hardware-crypto-offload">
-      <title>Hardware crypto acceleration</title>
-!Pinclude/net/mac80211.h Hardware crypto acceleration
-<!-- intentionally multiple !F lines to get proper order -->
-!Finclude/net/mac80211.h set_key_cmd
-!Finclude/net/mac80211.h ieee80211_key_conf
-!Finclude/net/mac80211.h ieee80211_key_alg
-!Finclude/net/mac80211.h ieee80211_key_flags
-    </chapter>
-
-    <chapter id="powersave">
-      <title>Powersave support</title>
-!Pinclude/net/mac80211.h Powersave support
-    </chapter>
-
-    <chapter id="beacon-filter">
-      <title>Beacon filter support</title>
-!Pinclude/net/mac80211.h Beacon filter support
-!Finclude/net/mac80211.h ieee80211_beacon_loss
-    </chapter>
-
-    <chapter id="qos">
-      <title>Multiple queues and QoS support</title>
-      <para>TBD</para>
-!Finclude/net/mac80211.h ieee80211_tx_queue_params
-    </chapter>
-
-    <chapter id="AP">
-      <title>Access point mode support</title>
-      <para>TBD</para>
-      <para>Some parts of the if_conf should be discussed here instead</para>
-      <para>
-        Insert notes about VLAN interfaces with hw crypto here or
-        in the hw crypto chapter.
-      </para>
-!Finclude/net/mac80211.h ieee80211_get_buffered_bc
-!Finclude/net/mac80211.h ieee80211_beacon_get
-    </chapter>
-
-    <chapter id="multi-iface">
-      <title>Supporting multiple virtual interfaces</title>
-      <para>TBD</para>
-      <para>
-        Note: WDS with identical MAC address should almost always be OK
-      </para>
-      <para>
-        Insert notes about having multiple virtual interfaces with
-        different MAC addresses here, note which configurations are
-        supported by mac80211, add notes about supporting hw crypto
-        with it.
-      </para>
-    </chapter>
-
-    <chapter id="hardware-scan-offload">
-      <title>Hardware scan offload</title>
-      <para>TBD</para>
-!Finclude/net/mac80211.h ieee80211_scan_completed
-    </chapter>
-  </part>
-
-  <part id="rate-control">
-    <title>Rate control interface</title>
-    <partintro>
-      <para>TBD</para>
-      <para>
-       This part of the book describes the rate control algorithm
-       interface and how it relates to mac80211 and drivers.
-      </para>
-    </partintro>
-    <chapter id="dummy">
-      <title>dummy chapter</title>
-      <para>TBD</para>
-    </chapter>
-  </part>
-
-  <part id="internal">
-    <title>Internals</title>
-    <partintro>
-      <para>TBD</para>
-      <para>
-       This part of the book describes mac80211 internals.
-      </para>
-    </partintro>
-
-    <chapter id="key-handling">
-      <title>Key handling</title>
-      <sect1>
-        <title>Key handling basics</title>
-!Pnet/mac80211/key.c Key handling basics
-      </sect1>
-      <sect1>
-        <title>MORE TBD</title>
-        <para>TBD</para>
-      </sect1>
-    </chapter>
-
-    <chapter id="rx-processing">
-      <title>Receive processing</title>
-      <para>TBD</para>
-    </chapter>
-
-    <chapter id="tx-processing">
-      <title>Transmit processing</title>
-      <para>TBD</para>
-    </chapter>
-
-    <chapter id="sta-info">
-      <title>Station info handling</title>
-      <sect1>
-        <title>Programming information</title>
-!Fnet/mac80211/sta_info.h sta_info
-!Fnet/mac80211/sta_info.h ieee80211_sta_info_flags
-      </sect1>
-      <sect1>
-        <title>STA information lifetime rules</title>
-!Pnet/mac80211/sta_info.c STA information lifetime rules
-      </sect1>
-    </chapter>
-
-    <chapter id="synchronisation">
-      <title>Synchronisation</title>
-      <para>TBD</para>
-      <para>Locking, lots of RCU</para>
-    </chapter>
-  </part>
-</book>
diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl
index 5d4d40f429a5..be34dcbe0d90 100644
--- a/Documentation/DocBook/media-entities.tmpl
+++ b/Documentation/DocBook/media-entities.tmpl
@@ -218,6 +218,7 @@
 <!ENTITY sub-dev-teletext SYSTEM "v4l/dev-teletext.xml">
 <!ENTITY sub-driver SYSTEM "v4l/driver.xml">
 <!ENTITY sub-libv4l SYSTEM "v4l/libv4l.xml">
+<!ENTITY sub-lirc_device_interface SYSTEM "v4l/lirc_device_interface.xml">
 <!ENTITY sub-remote_controllers SYSTEM "v4l/remote_controllers.xml">
 <!ENTITY sub-fdl-appendix SYSTEM "v4l/fdl-appendix.xml">
 <!ENTITY sub-close SYSTEM "v4l/func-close.xml">
@@ -249,6 +250,9 @@
 <!ENTITY sub-yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml">
 <!ENTITY sub-yuyv SYSTEM "v4l/pixfmt-yuyv.xml">
 <!ENTITY sub-yvyu SYSTEM "v4l/pixfmt-yvyu.xml">
+<!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
+<!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
+<!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml">
 <!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml">
 <!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml">
 <!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">
@@ -346,6 +350,9 @@
 <!ENTITY yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml">
 <!ENTITY yuyv SYSTEM "v4l/pixfmt-yuyv.xml">
 <!ENTITY yvyu SYSTEM "v4l/pixfmt-yvyu.xml">
+<!ENTITY srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
+<!ENTITY srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
+<!ENTITY y10 SYSTEM "v4l/pixfmt-y10.xml">
 <!ENTITY cropcap SYSTEM "v4l/vidioc-cropcap.xml">
 <!ENTITY dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">
 <!ENTITY encoder-cmd SYSTEM "v4l/vidioc-encoder-cmd.xml">
diff --git a/Documentation/DocBook/media.tmpl b/Documentation/DocBook/media.tmpl
index eea564bb12cb..f11048d4053f 100644
--- a/Documentation/DocBook/media.tmpl
+++ b/Documentation/DocBook/media.tmpl
@@ -28,7 +28,7 @@
 <title>LINUX MEDIA INFRASTRUCTURE API</title>
 
 <copyright>
-	<year>2009</year>
+	<year>2009-2010</year>
 	<holder>LinuxTV Developers</holder>
 </copyright>
 
@@ -61,7 +61,7 @@ Foundation. A copy of the license is included in the chapter entitled
 		in fact it covers several different video standards including
 		DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated
 		to documment support also for DVB-S2, ISDB-T and ISDB-S.</para>
-	<para>The third part covers other API's used by all media infrastructure devices</para>
+	<para>The third part covers Remote Controller API</para>
 	<para>For additional information and for the latest development code,
 		see: <ulink url="http://linuxtv.org">http://linuxtv.org</ulink>.</para>
 	<para>For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: <ulink url="http://vger.kernel.org/vger-lists.html#linux-media">Linux Media Mailing List (LMML).</ulink>.</para>
@@ -86,7 +86,7 @@ Foundation. A copy of the license is included in the chapter entitled
 </author>
 </authorgroup>
 <copyright>
-	<year>2009</year>
+	<year>2009-2010</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 
@@ -101,7 +101,7 @@ Foundation. A copy of the license is included in the chapter entitled
 </revhistory>
 </partinfo>
 
-<title>Other API's used by media infrastructure drivers</title>
+<title>Remote Controller API</title>
 <chapter id="remote_controllers">
 &sub-remote_controllers;
 </chapter>
diff --git a/Documentation/DocBook/scsi.tmpl b/Documentation/DocBook/scsi.tmpl
index d87f4569e768..324b53494f08 100644
--- a/Documentation/DocBook/scsi.tmpl
+++ b/Documentation/DocBook/scsi.tmpl
@@ -393,7 +393,7 @@
         </para>
         <para>
           For documentation see
-          <ulink url='http://www.torque.net/sg/sdebug26.html'>http://www.torque.net/sg/sdebug26.html</ulink>
+          <ulink url='http://sg.danny.cz/sg/sdebug26.html'>http://sg.danny.cz/sg/sdebug26.html</ulink>
         </para>
 <!-- !Edrivers/scsi/scsi_debug.c -->
       </sect2>
diff --git a/Documentation/DocBook/stylesheet.xsl b/Documentation/DocBook/stylesheet.xsl
index 254c1d5d2e50..85b25275196f 100644
--- a/Documentation/DocBook/stylesheet.xsl
+++ b/Documentation/DocBook/stylesheet.xsl
@@ -6,4 +6,5 @@
 <param name="callout.graphics">0</param>
 <!-- <param name="paper.type">A4</param> -->
 <param name="generate.section.toc.level">2</param>
+<param name="use.id.as.filename">1</param>
 </stylesheet>
diff --git a/Documentation/DocBook/tracepoint.tmpl b/Documentation/DocBook/tracepoint.tmpl
index e8473eae2a20..b57a9ede3224 100644
--- a/Documentation/DocBook/tracepoint.tmpl
+++ b/Documentation/DocBook/tracepoint.tmpl
@@ -104,4 +104,9 @@
    <title>Block IO</title>
 !Iinclude/trace/events/block.h
   </chapter>
+
+  <chapter id="workqueue">
+   <title>Workqueue</title>
+!Iinclude/trace/events/workqueue.h
+  </chapter>
 </book>
diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/v4l/compat.xml
index b42b935913cd..c9ce61d981f5 100644
--- a/Documentation/DocBook/v4l/compat.xml
+++ b/Documentation/DocBook/v4l/compat.xml
@@ -21,11 +21,15 @@ API.</para>
       <title>Opening and Closing Devices</title>
 
       <para>For compatibility reasons the character device file names
-recommended for V4L2 video capture, overlay, radio, teletext and raw
+recommended for V4L2 video capture, overlay, radio and raw
 vbi capture devices did not change from those used by V4L. They are
 listed in <xref linkend="devices" /> and below in <xref
 	  linkend="v4l-dev" />.</para>
 
+      <para>The teletext devices (minor range 192-223) have been removed in
+V4L2 and no longer exist. There is no hardware available anymore for handling
+pure teletext. Instead raw or sliced VBI is used.</para>
+
       <para>The V4L <filename>videodev</filename> module automatically
 assigns minor numbers to drivers in load order, depending on the
 registered device type. We recommend that V4L2 drivers by default
@@ -66,13 +70,6 @@ not compatible with V4L or V4L2.</para> </footnote>,
 	      <entry>64-127</entry>
 	    </row>
 	    <row>
-	      <entry>Teletext decoder</entry>
-	      <entry><para><filename>/dev/vtx</filename>,
-<filename>/dev/vtx0</filename> to
-<filename>/dev/vtx31</filename></para></entry>
-	      <entry>192-223</entry>
-	    </row>
-	    <row>
 	      <entry>Raw VBI capture</entry>
 	      <entry><para><filename>/dev/vbi</filename>,
 <filename>/dev/vbi0</filename> to
@@ -1091,8 +1088,9 @@ signed 64-bit integer. Output devices should not send a buffer out
 until the time in the timestamp field has arrived. I would like to
 follow SGI's lead, and adopt a multimedia timestamping system like
 their UST (Unadjusted System Time). See
-http://reality.sgi.com/cpirazzi_engr/lg/time/intro.html. [This link is
-no longer valid.] UST uses timestamps that are 64-bit signed integers
+http://web.archive.org/web/*/http://reality.sgi.com
+/cpirazzi_engr/lg/time/intro.html. 
+UST uses timestamps that are 64-bit signed integers
 (not struct timeval's) and given in nanosecond units. The UST clock
 starts at zero when the system is booted and runs continuously and
 uniformly. It takes a little over 292 years for UST to overflow. There
@@ -2344,6 +2342,17 @@ more information.</para>
 	</listitem>
       </orderedlist>
     </section>
+    <section>
+      <title>V4L2 in Linux 2.6.37</title>
+      <orderedlist>
+	<listitem>
+	  <para>Remove the vtx (videotext/teletext) API. This API was no longer
+used and no hardware exists to verify the API. Nor were any userspace applications found
+that used it. It was originally scheduled for removal in 2.6.35.
+	  </para>
+	</listitem>
+      </orderedlist>
+    </section>
 
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/v4l/controls.xml
index 8408caaee276..2fae3e87ce73 100644
--- a/Documentation/DocBook/v4l/controls.xml
+++ b/Documentation/DocBook/v4l/controls.xml
@@ -312,10 +312,17 @@ minimum value disables backlight compensation.</entry>
 	    information and bits 24-31 must be zero.</entry>
 	  </row>
 	  <row>
+	    <entry><constant>V4L2_CID_ILLUMINATORS_1</constant>
+		<constant>V4L2_CID_ILLUMINATORS_2</constant></entry>
+	    <entry>boolean</entry>
+	    <entry>Switch on or off the illuminator 1 or 2 of the device
+		(usually a microscope).</entry>
+	  </row>
+	  <row>
 	    <entry><constant>V4L2_CID_LASTP1</constant></entry>
 	    <entry></entry>
 	    <entry>End of the predefined control IDs (currently
-<constant>V4L2_CID_BG_COLOR</constant> + 1).</entry>
+<constant>V4L2_CID_ILLUMINATORS_2</constant> + 1).</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry>
@@ -357,9 +364,6 @@ enumerate_menu (void)
 	      querymenu.index++) {
 		if (0 == ioctl (fd, &VIDIOC-QUERYMENU;, &amp;querymenu)) {
 			printf ("  %s\n", querymenu.name);
-		} else {
-			perror ("VIDIOC_QUERYMENU");
-			exit (EXIT_FAILURE);
 		}
 	}
 }
diff --git a/Documentation/DocBook/v4l/dev-rds.xml b/Documentation/DocBook/v4l/dev-rds.xml
index 0869d701b1e5..360d2737e649 100644
--- a/Documentation/DocBook/v4l/dev-rds.xml
+++ b/Documentation/DocBook/v4l/dev-rds.xml
@@ -3,15 +3,16 @@
       <para>The Radio Data System transmits supplementary
 information in binary format, for example the station name or travel
 information, on an inaudible audio subcarrier of a radio program. This
-interface is aimed at devices capable of receiving and decoding RDS
+interface is aimed at devices capable of receiving and/or transmitting RDS
 information.</para>
 
       <para>For more information see the core RDS standard <xref linkend="en50067" />
 and the RBDS standard <xref linkend="nrsc4" />.</para>
 
       <para>Note that the RBDS standard as is used in the USA is almost identical
-to the RDS standard. Any RDS decoder can also handle RBDS. Only some of the fields
-have slightly different meanings. See the RBDS standard for more information.</para>
+to the RDS standard. Any RDS decoder/encoder can also handle RBDS. Only some of the
+fields have slightly different meanings. See the RBDS standard for more
+information.</para>
 
       <para>The RBDS standard also specifies support for MMBS (Modified Mobile Search).
 This is a proprietary format which seems to be discontinued. The RDS interface does not
@@ -21,16 +22,25 @@ be needed, then please contact the linux-media mailing list: &v4l-ml;.</para>
   <section>
     <title>Querying Capabilities</title>
 
-    <para>Devices supporting the RDS capturing API
-set the <constant>V4L2_CAP_RDS_CAPTURE</constant> flag in
+    <para>Devices supporting the RDS capturing API set
+the <constant>V4L2_CAP_RDS_CAPTURE</constant> flag in
 the <structfield>capabilities</structfield> field of &v4l2-capability;
-returned by the &VIDIOC-QUERYCAP; ioctl.
-Any tuner that supports RDS will set the
-<constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield>
-field of &v4l2-tuner;.
-Whether an RDS signal is present can be detected by looking at
-the <structfield>rxsubchans</structfield> field of &v4l2-tuner;: the
-<constant>V4L2_TUNER_SUB_RDS</constant> will be set if RDS data was detected.</para>
+returned by the &VIDIOC-QUERYCAP; ioctl.  Any tuner that supports RDS
+will set the <constant>V4L2_TUNER_CAP_RDS</constant> flag in
+the <structfield>capability</structfield> field of &v4l2-tuner;.  If
+the driver only passes RDS blocks without interpreting the data
+the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be
+set, see <link linkend="reading-rds-data">Reading RDS data</link>.
+For future use the
+flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> has also been
+defined. However, a driver for a radio tuner with this capability does
+not yet exist, so if you are planning to write such a driver you
+should discuss this on the linux-media mailing list: &v4l-ml;.</para>
+
+    <para> Whether an RDS signal is present can be detected by looking
+at the <structfield>rxsubchans</structfield> field of &v4l2-tuner;:
+the <constant>V4L2_TUNER_SUB_RDS</constant> will be set if RDS data
+was detected.</para>
 
     <para>Devices supporting the RDS output API
 set the <constant>V4L2_CAP_RDS_OUTPUT</constant> flag in
@@ -40,16 +50,31 @@ Any modulator that supports RDS will set the
 <constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield>
 field of &v4l2-modulator;.
 In order to enable the RDS transmission one must set the <constant>V4L2_TUNER_SUB_RDS</constant>
-bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.</para>
-
+bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.
+If the driver only passes RDS blocks without interpreting the data
+the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be set. If the
+tuner is capable of handling RDS entities like program identification codes and radio
+text, the flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> should be set,
+see <link linkend="writing-rds-data">Writing RDS data</link> and
+<link linkend="fm-tx-controls">FM Transmitter Control Reference</link>.</para>
   </section>
 
-  <section>
+  <section  id="reading-rds-data">
     <title>Reading RDS data</title>
 
       <para>RDS data can be read from the radio device
-with the &func-read; function. The data is packed in groups of three bytes,
+with the &func-read; function. The data is packed in groups of three bytes.</para>
+  </section>
+
+  <section  id="writing-rds-data">
+    <title>Writing RDS data</title>
+
+      <para>RDS data can be written to the radio device
+with the &func-write; function. The data is packed in groups of three bytes,
 as follows:</para>
+  </section>
+
+  <section>
     <table frame="none" pgwide="1" id="v4l2-rds-data">
       <title>struct
 <structname>v4l2_rds_data</structname></title>
@@ -111,48 +136,57 @@ as follows:</para>
 	<tbody valign="top">
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_MSK</entry>
+	    <entry> </entry>
 	    <entry>7</entry>
 	    <entry>Mask for bits 0-2 to get the block ID.</entry>
 	  </row>
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_A</entry>
+	    <entry> </entry>
 	    <entry>0</entry>
 	    <entry>Block A.</entry>
 	  </row>
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_B</entry>
+	    <entry> </entry>
 	    <entry>1</entry>
 	    <entry>Block B.</entry>
 	  </row>
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_C</entry>
+	    <entry> </entry>
 	    <entry>2</entry>
 	    <entry>Block C.</entry>
 	  </row>
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_D</entry>
+	    <entry> </entry>
 	    <entry>3</entry>
 	    <entry>Block D.</entry>
 	  </row>
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_C_ALT</entry>
+	    <entry> </entry>
 	    <entry>4</entry>
 	    <entry>Block C'.</entry>
 	  </row>
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_INVALID</entry>
+	    <entry>read-only</entry>
 	    <entry>7</entry>
 	    <entry>An invalid block.</entry>
 	  </row>
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_CORRECTED</entry>
+	    <entry>read-only</entry>
 	    <entry>0x40</entry>
 	    <entry>A bit error was detected but corrected.</entry>
 	  </row>
 	  <row>
 	    <entry>V4L2_RDS_BLOCK_ERROR</entry>
+	    <entry>read-only</entry>
 	    <entry>0x80</entry>
-	    <entry>An incorrectable error occurred.</entry>
+	    <entry>An uncorrectable error occurred.</entry>
 	  </row>
 	</tbody>
       </tgroup>
diff --git a/Documentation/DocBook/v4l/dev-teletext.xml b/Documentation/DocBook/v4l/dev-teletext.xml
index 76184e8ed618..414b1cfff9f4 100644
--- a/Documentation/DocBook/v4l/dev-teletext.xml
+++ b/Documentation/DocBook/v4l/dev-teletext.xml
@@ -1,35 +1,32 @@
   <title>Teletext Interface</title>
 
-  <para>This interface aims at devices receiving and demodulating
+  <para>This interface was aimed at devices receiving and demodulating
 Teletext data [<xref linkend="ets300706" />, <xref linkend="itu653" />], evaluating the
 Teletext packages and storing formatted pages in cache memory. Such
 devices are usually implemented as microcontrollers with serial
-interface (I<superscript>2</superscript>C) and can be found on older
+interface (I<superscript>2</superscript>C) and could be found on old
 TV cards, dedicated Teletext decoding cards and home-brew devices
 connected to the PC parallel port.</para>
 
-  <para>The Teletext API was designed by Martin Buck. It is defined in
+  <para>The Teletext API was designed by Martin Buck. It was defined in
 the kernel header file <filename>linux/videotext.h</filename>, the
 specification is available from <ulink url="ftp://ftp.gwdg.de/pub/linux/misc/videotext/">
 ftp://ftp.gwdg.de/pub/linux/misc/videotext/</ulink>. (Videotext is the name of
-the German public television Teletext service.) Conventional character
-device file names are <filename>/dev/vtx</filename> and
-<filename>/dev/vttuner</filename>, with device number 83, 0 and 83, 16
-respectively. A similar interface exists for the Philips SAA5249
-Teletext decoder [specification?] with character device file names
-<filename>/dev/tlkN</filename>, device number 102, N.</para>
+the German public television Teletext service.)</para>
 
   <para>Eventually the Teletext API was integrated into the V4L API
 with character device file names <filename>/dev/vtx0</filename> to
 <filename>/dev/vtx31</filename>, device major number 81, minor numbers
-192 to 223. For reference the V4L Teletext API specification is
-reproduced here in full: "Teletext interfaces talk the existing VTX
-API." Teletext devices with major number 83 and 102 will be removed in
-Linux 2.6.</para>
+192 to 223.</para>
 
-  <para>There are no plans to replace the Teletext API or to integrate
-it into V4L2. Please write to the linux-media mailing list: &v4l-ml;
-when the need arises.</para>
+  <para>However, teletext decoders were quickly replaced by more
+generic VBI demodulators and those dedicated teletext decoders no longer exist.
+For many years the vtx devices were still around, even though nobody used
+them. So the decision was made to finally remove support for the Teletext API in
+kernel 2.6.37.</para>
+
+  <para>Modern devices all use the <link linkend="raw-vbi">raw</link> or
+<link linkend="sliced">sliced</link> VBI API.</para>
 
   <!--
 Local Variables:
diff --git a/Documentation/DocBook/v4l/fdl-appendix.xml b/Documentation/DocBook/v4l/fdl-appendix.xml
index b6ce50dbe492..ae22394ba997 100644
--- a/Documentation/DocBook/v4l/fdl-appendix.xml
+++ b/Documentation/DocBook/v4l/fdl-appendix.xml
@@ -2,7 +2,7 @@
      The GNU Free Documentation License 1.1 in DocBook
      Markup by Eric Baudais <baudais@okstate.edu>
      Maintained by the GNOME Documentation Project
-     http://developer.gnome.org/projects/gdp
+     http://live.gnome.org/DocumentationProject
      Version: 1.0.1
      Last Modified: Nov 16, 2000
 -->
diff --git a/Documentation/DocBook/v4l/lirc_device_interface.xml b/Documentation/DocBook/v4l/lirc_device_interface.xml
new file mode 100644
index 000000000000..68134c0ab4d1
--- /dev/null
+++ b/Documentation/DocBook/v4l/lirc_device_interface.xml
@@ -0,0 +1,251 @@
+<section id="lirc_dev">
+<title>LIRC Device Interface</title>
+
+
+<section id="lirc_dev_intro">
+<title>Introduction</title>
+
+<para>The LIRC device interface is a bi-directional interface for
+transporting raw IR data between userspace and kernelspace. Fundamentally,
+it is just a chardev (/dev/lircX, for X = 0, 1, 2, ...), with a number
+of standard struct file_operations defined on it. With respect to
+transporting raw IR data to and fro, the essential fops are read, write
+and ioctl.</para>
+
+<para>Example dmesg output upon a driver registering w/LIRC:</para>
+  <blockquote>
+    <para>$ dmesg |grep lirc_dev</para>
+    <para>lirc_dev: IR Remote Control driver registered, major 248</para>
+    <para>rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0</para>
+  </blockquote>
+
+<para>What you should see for a chardev:</para>
+  <blockquote>
+    <para>$ ls -l /dev/lirc*</para>
+    <para>crw-rw---- 1 root root 248, 0 Jul  2 22:20 /dev/lirc0</para>
+  </blockquote>
+</section>
+
+<section id="lirc_read">
+<title>LIRC read fop</title>
+
+<para>The lircd userspace daemon reads raw IR data from the LIRC chardev. The
+exact format of the data depends on what modes a driver supports, and what
+mode has been selected. lircd obtains supported modes and sets the active mode
+via the ioctl interface, detailed at <xref linkend="lirc_ioctl"/>. The generally
+preferred mode is LIRC_MODE_MODE2, in which packets containing an int value
+describing an IR signal are read from the chardev.</para>
+
+<para>See also <ulink url="http://www.lirc.org/html/technical.html">http://www.lirc.org/html/technical.html</ulink> for more info.</para>
+</section>
+
+<section id="lirc_write">
+<title>LIRC write fop</title>
+
+<para>The data written to the chardev is a pulse/space sequence of integer
+values. Pulses and spaces are only marked implicitly by their position. The
+data must start and end with a pulse, therefore, the data must always include
+an unevent number of samples. The write function must block until the data has
+been transmitted by the hardware.</para>
+</section>
+
+<section id="lirc_ioctl">
+<title>LIRC ioctl fop</title>
+
+<para>The LIRC device's ioctl definition is bound by the ioctl function
+definition of struct file_operations, leaving us with an unsigned int
+for the ioctl command and an unsigned long for the arg. For the purposes
+of ioctl portability across 32-bit and 64-bit, these values are capped
+to their 32-bit sizes.</para>
+
+<para>The following ioctls can be used to change specific hardware settings.
+In general each driver should have a default set of settings. The driver
+implementation is expected to re-apply the default settings when the device
+is closed by user-space, so that every application opening the device can rely
+on working with the default settings initially.</para>
+
+<variablelist>
+  <varlistentry>
+    <term>LIRC_GET_FEATURES</term>
+    <listitem>
+      <para>Obviously, get the underlying hardware device's features. If a driver
+      does not announce support of certain features, calling of the corresponding
+      ioctls is undefined.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_SEND_MODE</term>
+    <listitem>
+      <para>Get supported transmit mode. Only LIRC_MODE_PULSE is supported by lircd.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_REC_MODE</term>
+    <listitem>
+      <para>Get supported receive modes. Only LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE
+      are supported by lircd.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_SEND_CARRIER</term>
+    <listitem>
+      <para>Get carrier frequency (in Hz) currently used for transmit.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_REC_CARRIER</term>
+    <listitem>
+      <para>Get carrier frequency (in Hz) currently used for IR reception.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_{G,S}ET_{SEND,REC}_DUTY_CYCLE</term>
+    <listitem>
+      <para>Get/set the duty cycle (from 0 to 100) of the carrier signal. Currently,
+      no special meaning is defined for 0 or 100, but this could be used to switch
+      off carrier generation in the future, so these values should be reserved.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_REC_RESOLUTION</term>
+    <listitem>
+      <para>Some receiver have maximum resolution which is defined by internal
+      sample rate or data format limitations. E.g. it's common that signals can
+      only be reported in 50 microsecond steps. This integer value is used by
+      lircd to automatically adjust the aeps tolerance value in the lircd
+      config file.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_M{IN,AX}_TIMEOUT</term>
+    <listitem>
+      <para>Some devices have internal timers that can be used to detect when
+      there's no IR activity for a long time. This can help lircd in detecting
+      that a IR signal is finished and can speed up the decoding process.
+      Returns an integer value with the minimum/maximum timeout that can be
+      set. Some devices have a fixed timeout, in that case both ioctls will
+      return the same value even though the timeout cannot be changed.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_M{IN,AX}_FILTER_{PULSE,SPACE}</term>
+    <listitem>
+      <para>Some devices are able to filter out spikes in the incoming signal
+      using given filter rules. These ioctls return the hardware capabilities
+      that describe the bounds of the possible filters. Filter settings depend
+      on the IR protocols that are expected. lircd derives the settings from
+      all protocols definitions found in its config file.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_GET_LENGTH</term>
+    <listitem>
+      <para>Retrieves the code length in bits (only for LIRC_MODE_LIRCCODE).
+      Reads on the device must be done in blocks matching the bit count.
+      The bit could should be rounded up so that it matches full bytes.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_{SEND,REC}_MODE</term>
+    <listitem>
+      <para>Set send/receive mode. Largely obsolete for send, as only
+      LIRC_MODE_PULSE is supported.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_{SEND,REC}_CARRIER</term>
+    <listitem>
+      <para>Set send/receive carrier (in Hz).</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_TRANSMITTER_MASK</term>
+    <listitem>
+      <para>This enables the given set of transmitters. The first transmitter
+      is encoded by the least significant bit, etc. When an invalid bit mask
+      is given, i.e. a bit is set, even though the device does not have so many
+      transitters, then this ioctl returns the number of available transitters
+      and does nothing otherwise.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_REC_TIMEOUT</term>
+    <listitem>
+      <para>Sets the integer value for IR inactivity timeout (cf.
+      LIRC_GET_MIN_TIMEOUT and LIRC_GET_MAX_TIMEOUT). A value of 0 (if
+      supported by the hardware) disables all hardware timeouts and data should
+      be reported as soon as possible. If the exact value cannot be set, then
+      the next possible value _greater_ than the given value should be set.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_REC_TIMEOUT_REPORTS</term>
+    <listitem>
+      <para>Enable (1) or disable (0) timeout reports in LIRC_MODE_MODE2. By
+      default, timeout reports should be turned off.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_REC_FILTER_{,PULSE,SPACE}</term>
+    <listitem>
+      <para>Pulses/spaces shorter than this are filtered out by hardware. If
+      filters cannot be set independently for pulse/space, the corresponding
+      ioctls must return an error and LIRC_SET_REC_FILTER shall be used instead.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_MEASURE_CARRIER_MODE</term>
+    <listitem>
+      <para>Enable (1)/disable (0) measure mode. If enabled, from the next key
+      press on, the driver will send LIRC_MODE2_FREQUENCY packets. By default
+      this should be turned off.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_REC_{DUTY_CYCLE,CARRIER}_RANGE</term>
+    <listitem>
+      <para>To set a range use LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE
+      with the lower bound first and later LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER
+      with the upper bound.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_NOTIFY_DECODE</term>
+    <listitem>
+      <para>This ioctl is called by lircd whenever a successful decoding of an
+      incoming IR signal could be done. This can be used by supporting hardware
+      to give visual feedback to the user e.g. by flashing a LED.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SETUP_{START,END}</term>
+    <listitem>
+      <para>Setting of several driver parameters can be optimized by encapsulating
+      the according ioctl calls with LIRC_SETUP_START/LIRC_SETUP_END. When a
+      driver receives a LIRC_SETUP_START ioctl it can choose to not commit
+      further setting changes to the hardware until a LIRC_SETUP_END is received.
+      But this is open to the driver implementation and every driver must also
+      handle parameter changes which are not encapsulated by LIRC_SETUP_START
+      and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls.</para>
+    </listitem>
+  </varlistentry>
+  <varlistentry>
+    <term>LIRC_SET_WIDEBAND_RECEIVER</term>
+    <listitem>
+      <para>Some receivers are equipped with special wide band receiver which is intended
+      to be used to learn output of existing remote.
+      Calling that ioctl with (1) will enable it, and with (0) disable it.
+      This might be useful of receivers that have otherwise narrow band receiver
+      that prevents them to be used with some remotes.
+      Wide band receiver might also be more precise
+      On the other hand its disadvantage it usually reduced range of reception.
+      Note: wide band receiver might be implictly enabled if you enable
+      carrier reports. In that case it will be disabled as soon as you disable
+      carrier reports. Trying to disable wide band receiver while carrier
+      reports are active will do nothing.</para>
+    </listitem>
+  </varlistentry>
+</variablelist>
+
+</section>
+</section>
diff --git a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
index d2dd697a81d8..4db272b8a0d3 100644
--- a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
+++ b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
@@ -240,6 +240,45 @@ colorspace <constant>V4L2_COLORSPACE_SRGB</constant>.</para>
 	    <entry>r<subscript>1</subscript></entry>
 	    <entry>r<subscript>0</subscript></entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-BGR666">
+	    <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
+	    <entry>'BGRH'</entry>
+	    <entry></entry>
+	    <entry>b<subscript>5</subscript></entry>
+	    <entry>b<subscript>4</subscript></entry>
+	    <entry>b<subscript>3</subscript></entry>
+	    <entry>b<subscript>2</subscript></entry>
+	    <entry>b<subscript>1</subscript></entry>
+	    <entry>b<subscript>0</subscript></entry>
+	    <entry>g<subscript>5</subscript></entry>
+	    <entry>g<subscript>4</subscript></entry>
+	    <entry></entry>
+	    <entry>g<subscript>3</subscript></entry>
+	    <entry>g<subscript>2</subscript></entry>
+	    <entry>g<subscript>1</subscript></entry>
+	    <entry>g<subscript>0</subscript></entry>
+	    <entry>r<subscript>5</subscript></entry>
+	    <entry>r<subscript>4</subscript></entry>
+	    <entry>r<subscript>3</subscript></entry>
+	    <entry>r<subscript>2</subscript></entry>
+	    <entry></entry>
+	    <entry>r<subscript>1</subscript></entry>
+	    <entry>r<subscript>0</subscript></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
 	  <row id="V4L2-PIX-FMT-BGR24">
 	    <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
 	    <entry>'BGR3'</entry>
@@ -700,6 +739,45 @@ defined in error. Drivers may interpret them as in <xref
 	    <entry>b<subscript>1</subscript></entry>
 	    <entry>b<subscript>0</subscript></entry>
 	  </row>
+	  <row><!-- id="V4L2-PIX-FMT-BGR666" -->
+	    <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
+	    <entry>'BGRH'</entry>
+	    <entry></entry>
+	    <entry>b<subscript>5</subscript></entry>
+	    <entry>b<subscript>4</subscript></entry>
+	    <entry>b<subscript>3</subscript></entry>
+	    <entry>b<subscript>2</subscript></entry>
+	    <entry>b<subscript>1</subscript></entry>
+	    <entry>b<subscript>0</subscript></entry>
+	    <entry>g<subscript>5</subscript></entry>
+	    <entry>g<subscript>4</subscript></entry>
+	    <entry></entry>
+	    <entry>g<subscript>3</subscript></entry>
+	    <entry>g<subscript>2</subscript></entry>
+	    <entry>g<subscript>1</subscript></entry>
+	    <entry>g<subscript>0</subscript></entry>
+	    <entry>r<subscript>5</subscript></entry>
+	    <entry>r<subscript>4</subscript></entry>
+	    <entry>r<subscript>3</subscript></entry>
+	    <entry>r<subscript>2</subscript></entry>
+	    <entry></entry>
+	    <entry>r<subscript>1</subscript></entry>
+	    <entry>r<subscript>0</subscript></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
 	  <row><!-- id="V4L2-PIX-FMT-BGR24" -->
 	    <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
 	    <entry>'BGR3'</entry>
diff --git a/Documentation/DocBook/v4l/pixfmt-srggb10.xml b/Documentation/DocBook/v4l/pixfmt-srggb10.xml
new file mode 100644
index 000000000000..7b274092e60c
--- /dev/null
+++ b/Documentation/DocBook/v4l/pixfmt-srggb10.xml
@@ -0,0 +1,90 @@
+    <refentry>
+      <refmeta>
+	<refentrytitle>V4L2_PIX_FMT_SRGGB10 ('RG10'),
+	 V4L2_PIX_FMT_SGRBG10 ('BA10'),
+	 V4L2_PIX_FMT_SGBRG10 ('GB10'),
+	 V4L2_PIX_FMT_SBGGR10 ('BG10'),
+	 </refentrytitle>
+	&manvol;
+      </refmeta>
+      <refnamediv>
+	<refname id="V4L2-PIX-FMT-SRGGB10"><constant>V4L2_PIX_FMT_SRGGB10</constant></refname>
+	<refname id="V4L2-PIX-FMT-SGRBG10"><constant>V4L2_PIX_FMT_SGRBG10</constant></refname>
+	<refname id="V4L2-PIX-FMT-SGBRG10"><constant>V4L2_PIX_FMT_SGBRG10</constant></refname>
+	<refname id="V4L2-PIX-FMT-SBGGR10"><constant>V4L2_PIX_FMT_SBGGR10</constant></refname>
+	<refpurpose>10-bit Bayer formats expanded to 16 bits</refpurpose>
+      </refnamediv>
+      <refsect1>
+	<title>Description</title>
+
+	<para>The following four pixel formats are raw sRGB / Bayer formats with
+10 bits per colour. Each colour component is stored in a 16-bit word, with 6
+unused high bits filled with zeros. Each n-pixel row contains n/2 green samples
+and n/2 blue or red samples, with alternating red and blue rows. Bytes are
+stored in memory in little endian order. They are conventionally described
+as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example of one of these
+formats</para>
+
+    <example>
+      <title><constant>V4L2_PIX_FMT_SBGGR10</constant> 4 &times; 4
+pixel image</title>
+
+      <formalpara>
+	<title>Byte Order.</title>
+	<para>Each cell is one byte, high 6 bits in high bytes are 0.
+	  <informaltable frame="none">
+	    <tgroup cols="5" align="center">
+	      <colspec align="left" colwidth="2*" />
+	      <tbody valign="top">
+		<row>
+		  <entry>start&nbsp;+&nbsp;0:</entry>
+		  <entry>B<subscript>00low</subscript></entry>
+		  <entry>B<subscript>00high</subscript></entry>
+		  <entry>G<subscript>01low</subscript></entry>
+		  <entry>G<subscript>01high</subscript></entry>
+		  <entry>B<subscript>02low</subscript></entry>
+		  <entry>B<subscript>02high</subscript></entry>
+		  <entry>G<subscript>03low</subscript></entry>
+		  <entry>G<subscript>03high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;8:</entry>
+		  <entry>G<subscript>10low</subscript></entry>
+		  <entry>G<subscript>10high</subscript></entry>
+		  <entry>R<subscript>11low</subscript></entry>
+		  <entry>R<subscript>11high</subscript></entry>
+		  <entry>G<subscript>12low</subscript></entry>
+		  <entry>G<subscript>12high</subscript></entry>
+		  <entry>R<subscript>13low</subscript></entry>
+		  <entry>R<subscript>13high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;16:</entry>
+		  <entry>B<subscript>20low</subscript></entry>
+		  <entry>B<subscript>20high</subscript></entry>
+		  <entry>G<subscript>21low</subscript></entry>
+		  <entry>G<subscript>21high</subscript></entry>
+		  <entry>B<subscript>22low</subscript></entry>
+		  <entry>B<subscript>22high</subscript></entry>
+		  <entry>G<subscript>23low</subscript></entry>
+		  <entry>G<subscript>23high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;24:</entry>
+		  <entry>G<subscript>30low</subscript></entry>
+		  <entry>G<subscript>30high</subscript></entry>
+		  <entry>R<subscript>31low</subscript></entry>
+		  <entry>R<subscript>31high</subscript></entry>
+		  <entry>G<subscript>32low</subscript></entry>
+		  <entry>G<subscript>32high</subscript></entry>
+		  <entry>R<subscript>33low</subscript></entry>
+		  <entry>R<subscript>33high</subscript></entry>
+		</row>
+	      </tbody>
+	    </tgroup>
+	  </informaltable>
+	</para>
+      </formalpara>
+    </example>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/v4l/pixfmt-srggb8.xml b/Documentation/DocBook/v4l/pixfmt-srggb8.xml
new file mode 100644
index 000000000000..2570e3be3cf1
--- /dev/null
+++ b/Documentation/DocBook/v4l/pixfmt-srggb8.xml
@@ -0,0 +1,67 @@
+    <refentry id="V4L2-PIX-FMT-SRGGB8">
+      <refmeta>
+	<refentrytitle>V4L2_PIX_FMT_SRGGB8 ('RGGB')</refentrytitle>
+	&manvol;
+      </refmeta>
+      <refnamediv>
+	<refname><constant>V4L2_PIX_FMT_SRGGB8</constant></refname>
+	<refpurpose>Bayer RGB format</refpurpose>
+      </refnamediv>
+      <refsect1>
+	<title>Description</title>
+
+	<para>This is commonly the native format of digital cameras,
+reflecting the arrangement of sensors on the CCD device. Only one red,
+green or blue value is given for each pixel. Missing components must
+be interpolated from neighbouring pixels. From left to right the first
+row consists of a red and green value, the second row of a green and
+blue value. This scheme repeats to the right and down for every two
+columns and rows.</para>
+
+	<example>
+	  <title><constant>V4L2_PIX_FMT_SRGGB8</constant> 4 &times; 4
+pixel image</title>
+
+	  <formalpara>
+	    <title>Byte Order.</title>
+	    <para>Each cell is one byte.
+	      <informaltable frame="none">
+		<tgroup cols="5" align="center">
+		  <colspec align="left" colwidth="2*" />
+		  <tbody valign="top">
+		    <row>
+		      <entry>start&nbsp;+&nbsp;0:</entry>
+		      <entry>R<subscript>00</subscript></entry>
+		      <entry>G<subscript>01</subscript></entry>
+		      <entry>R<subscript>02</subscript></entry>
+		      <entry>G<subscript>03</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;4:</entry>
+		      <entry>G<subscript>10</subscript></entry>
+		      <entry>B<subscript>11</subscript></entry>
+		      <entry>G<subscript>12</subscript></entry>
+		      <entry>B<subscript>13</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;8:</entry>
+		      <entry>R<subscript>20</subscript></entry>
+		      <entry>G<subscript>21</subscript></entry>
+		      <entry>R<subscript>22</subscript></entry>
+		      <entry>G<subscript>23</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start&nbsp;+&nbsp;12:</entry>
+		      <entry>G<subscript>30</subscript></entry>
+		      <entry>B<subscript>31</subscript></entry>
+		      <entry>G<subscript>32</subscript></entry>
+		      <entry>B<subscript>33</subscript></entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+	      </informaltable>
+	    </para>
+	  </formalpara>
+	</example>
+      </refsect1>
+    </refentry>
diff --git a/Documentation/DocBook/v4l/pixfmt-y10.xml b/Documentation/DocBook/v4l/pixfmt-y10.xml
new file mode 100644
index 000000000000..d065043db8d8
--- /dev/null
+++ b/Documentation/DocBook/v4l/pixfmt-y10.xml
@@ -0,0 +1,79 @@
+<refentry id="V4L2-PIX-FMT-Y10">
+  <refmeta>
+    <refentrytitle>V4L2_PIX_FMT_Y10 ('Y10 ')</refentrytitle>
+    &manvol;
+  </refmeta>
+  <refnamediv>
+    <refname><constant>V4L2_PIX_FMT_Y10</constant></refname>
+    <refpurpose>Grey-scale image</refpurpose>
+  </refnamediv>
+  <refsect1>
+    <title>Description</title>
+
+    <para>This is a grey-scale image with a depth of 10 bits per pixel. Pixels
+are stored in 16-bit words with unused high bits padded with 0. The least
+significant byte is stored at lower memory addresses (little-endian).</para>
+
+    <example>
+      <title><constant>V4L2_PIX_FMT_Y10</constant> 4 &times; 4
+pixel image</title>
+
+      <formalpara>
+	<title>Byte Order.</title>
+	<para>Each cell is one byte.
+	  <informaltable frame="none">
+	    <tgroup cols="9" align="center">
+	      <colspec align="left" colwidth="2*" />
+	      <tbody valign="top">
+		<row>
+		  <entry>start&nbsp;+&nbsp;0:</entry>
+		  <entry>Y'<subscript>00low</subscript></entry>
+		  <entry>Y'<subscript>00high</subscript></entry>
+		  <entry>Y'<subscript>01low</subscript></entry>
+		  <entry>Y'<subscript>01high</subscript></entry>
+		  <entry>Y'<subscript>02low</subscript></entry>
+		  <entry>Y'<subscript>02high</subscript></entry>
+		  <entry>Y'<subscript>03low</subscript></entry>
+		  <entry>Y'<subscript>03high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;8:</entry>
+		  <entry>Y'<subscript>10low</subscript></entry>
+		  <entry>Y'<subscript>10high</subscript></entry>
+		  <entry>Y'<subscript>11low</subscript></entry>
+		  <entry>Y'<subscript>11high</subscript></entry>
+		  <entry>Y'<subscript>12low</subscript></entry>
+		  <entry>Y'<subscript>12high</subscript></entry>
+		  <entry>Y'<subscript>13low</subscript></entry>
+		  <entry>Y'<subscript>13high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;16:</entry>
+		  <entry>Y'<subscript>20low</subscript></entry>
+		  <entry>Y'<subscript>20high</subscript></entry>
+		  <entry>Y'<subscript>21low</subscript></entry>
+		  <entry>Y'<subscript>21high</subscript></entry>
+		  <entry>Y'<subscript>22low</subscript></entry>
+		  <entry>Y'<subscript>22high</subscript></entry>
+		  <entry>Y'<subscript>23low</subscript></entry>
+		  <entry>Y'<subscript>23high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;24:</entry>
+		  <entry>Y'<subscript>30low</subscript></entry>
+		  <entry>Y'<subscript>30high</subscript></entry>
+		  <entry>Y'<subscript>31low</subscript></entry>
+		  <entry>Y'<subscript>31high</subscript></entry>
+		  <entry>Y'<subscript>32low</subscript></entry>
+		  <entry>Y'<subscript>32high</subscript></entry>
+		  <entry>Y'<subscript>33low</subscript></entry>
+		  <entry>Y'<subscript>33high</subscript></entry>
+		</row>
+	      </tbody>
+	    </tgroup>
+	  </informaltable>
+	</para>
+      </formalpara>
+    </example>
+  </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml
index c4ad0a8e42dc..d7c467187095 100644
--- a/Documentation/DocBook/v4l/pixfmt.xml
+++ b/Documentation/DocBook/v4l/pixfmt.xml
@@ -566,7 +566,9 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.<
     &sub-sbggr8;
     &sub-sgbrg8;
     &sub-sgrbg8;
+    &sub-srggb8;
     &sub-sbggr16;
+    &sub-srggb10;
   </section>
 
   <section id="yuv-formats">
@@ -589,6 +591,7 @@ information.</para>
 
     &sub-packed-yuv;
     &sub-grey;
+    &sub-y10;
     &sub-y16;
     &sub-yuyv;
     &sub-uyvy;
@@ -685,6 +688,11 @@ http://www.ivtvdriver.org/</ulink></para><para>The format is documented in the
 kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm12</filename>
 </para></entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-CPIA1">
+	    <entry><constant>V4L2_PIX_FMT_CPIA1</constant></entry>
+	    <entry>'CPIA'</entry>
+	    <entry>YUV format used by the gspca cpia1 driver.</entry>
+	  </row>
 	  <row id="V4L2-PIX-FMT-SPCA501">
 	    <entry><constant>V4L2_PIX_FMT_SPCA501</constant></entry>
 	    <entry>'S501'</entry>
@@ -705,11 +713,6 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm
 	    <entry>'S561'</entry>
 	    <entry>Compressed GBRG Bayer format used by the gspca driver.</entry>
 	  </row>
-	  <row id="V4L2-PIX-FMT-SGRBG10">
-	    <entry><constant>V4L2_PIX_FMT_SGRBG10</constant></entry>
-	    <entry>'DA10'</entry>
-	    <entry>10 bit raw Bayer, expanded to 16 bits.</entry>
-	  </row>
 	  <row id="V4L2-PIX-FMT-SGRBG10DPCM8">
 	    <entry><constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant></entry>
 	    <entry>'DB10'</entry>
@@ -770,6 +773,11 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm
 	    <entry>'S920'</entry>
 	    <entry>YUV 4:2:0 format of the gspca sn9c20x driver.</entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-SN9C2028">
+	    <entry><constant>V4L2_PIX_FMT_SN9C2028</constant></entry>
+	    <entry>'SONX'</entry>
+	    <entry>Compressed GBRG bayer format of the gspca sn9c2028 driver.</entry>
+	  </row>
 	  <row id="V4L2-PIX-FMT-STV0680">
 	    <entry><constant>V4L2_PIX_FMT_STV0680</constant></entry>
 	    <entry>'S680'</entry>
@@ -787,6 +795,20 @@ http://www.thedirks.org/winnov/</ulink></para></entry>
 	    <entry>'TM60'</entry>
 	    <entry><para>Used by Trident tm6000</para></entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-CIT-YYVYUY">
+	    <entry><constant>V4L2_PIX_FMT_CIT_YYVYUY</constant></entry>
+	    <entry>'CITV'</entry>
+	    <entry><para>Used by xirlink CIT, found at IBM webcams.</para>
+	           <para>Uses one line of Y then 1 line of VYUY</para>
+	    </entry>
+	  </row>
+	  <row id="V4L2-PIX-FMT-KONICA420">
+	    <entry><constant>V4L2_PIX_FMT_KONICA420</constant></entry>
+	    <entry>'KONI'</entry>
+	    <entry><para>Used by Konica webcams.</para>
+	           <para>YUV420 planar in blocks of 256 pixels.</para>
+	    </entry>
+	  </row>
 	  <row id="V4L2-PIX-FMT-YYUV">
 	    <entry><constant>V4L2_PIX_FMT_YYUV</constant></entry>
 	    <entry>'YYUV'</entry>
diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/v4l/remote_controllers.xml
index 73f5eab091f4..3c3b667b28e7 100644
--- a/Documentation/DocBook/v4l/remote_controllers.xml
+++ b/Documentation/DocBook/v4l/remote_controllers.xml
@@ -173,3 +173,5 @@ keymapping.</para>
 <para>This program demonstrates how to replace the keymap tables.</para>
 &sub-keytable-c;
 </section>
+
+&sub-lirc_device_interface;
diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml
index 7c3c098d5d08..839e93e875ae 100644
--- a/Documentation/DocBook/v4l/v4l2.xml
+++ b/Documentation/DocBook/v4l/v4l2.xml
@@ -99,6 +99,7 @@ Remote Controller chapter.</contrib>
       <year>2007</year>
       <year>2008</year>
       <year>2009</year>
+      <year>2010</year>
       <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
 Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
     </copyright>
@@ -110,10 +111,17 @@ Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
       <!-- Put document revisions here, newest first. -->
       <!-- API revisions (changes and additions of defines, enums,
 structs, ioctls) must be noted in more detail in the history chapter
-(compat.sgml), along with the possible impact on existing drivers and
+(compat.xml), along with the possible impact on existing drivers and
 applications. -->
 
       <revision>
+	<revnumber>2.6.37</revnumber>
+	<date>2010-08-06</date>
+	<authorinitials>hv</authorinitials>
+	<revremark>Removed obsolete vtx (videotext) API.</revremark>
+      </revision>
+
+      <revision>
 	<revnumber>2.6.33</revnumber>
 	<date>2009-12-03</date>
 	<authorinitials>mk</authorinitials>
diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml
index 865b06d9e679..325b23b6964c 100644
--- a/Documentation/DocBook/v4l/videodev2.h.xml
+++ b/Documentation/DocBook/v4l/videodev2.h.xml
@@ -154,23 +154,13 @@ enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> {
         V4L2_BUF_TYPE_VBI_OUTPUT           = 5,
         V4L2_BUF_TYPE_SLICED_VBI_CAPTURE   = 6,
         V4L2_BUF_TYPE_SLICED_VBI_OUTPUT    = 7,
-#if 1 /*KEEP*/
+#if 1
         /* Experimental */
         V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
 #endif
         V4L2_BUF_TYPE_PRIVATE              = 0x80,
 };
 
-enum <link linkend="v4l2-ctrl-type">v4l2_ctrl_type</link> {
-        V4L2_CTRL_TYPE_INTEGER       = 1,
-        V4L2_CTRL_TYPE_BOOLEAN       = 2,
-        V4L2_CTRL_TYPE_MENU          = 3,
-        V4L2_CTRL_TYPE_BUTTON        = 4,
-        V4L2_CTRL_TYPE_INTEGER64     = 5,
-        V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
-        V4L2_CTRL_TYPE_STRING        = 7,
-};
-
 enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link> {
         V4L2_TUNER_RADIO             = 1,
         V4L2_TUNER_ANALOG_TV         = 2,
@@ -288,6 +278,7 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
 #define <link linkend="V4L2-PIX-FMT-RGB565">V4L2_PIX_FMT_RGB565</link>  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
 #define <link linkend="V4L2-PIX-FMT-RGB555X">V4L2_PIX_FMT_RGB555X</link> v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
 #define <link linkend="V4L2-PIX-FMT-RGB565X">V4L2_PIX_FMT_RGB565X</link> v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
+#define <link linkend="V4L2-PIX-FMT-BGR666">V4L2_PIX_FMT_BGR666</link>  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6     */
 #define <link linkend="V4L2-PIX-FMT-BGR24">V4L2_PIX_FMT_BGR24</link>   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
 #define <link linkend="V4L2-PIX-FMT-RGB24">V4L2_PIX_FMT_RGB24</link>   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
 #define <link linkend="V4L2-PIX-FMT-BGR32">V4L2_PIX_FMT_BGR32</link>   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
@@ -295,6 +286,9 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
 
 /* Grey formats */
 #define <link linkend="V4L2-PIX-FMT-GREY">V4L2_PIX_FMT_GREY</link>    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
+#define <link linkend="V4L2-PIX-FMT-Y4">V4L2_PIX_FMT_Y4</link>      v4l2_fourcc('Y', '0', '4', ' ') /*  4  Greyscale     */
+#define <link linkend="V4L2-PIX-FMT-Y6">V4L2_PIX_FMT_Y6</link>      v4l2_fourcc('Y', '0', '6', ' ') /*  6  Greyscale     */
+#define <link linkend="V4L2-PIX-FMT-Y10">V4L2_PIX_FMT_Y10</link>     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
 #define <link linkend="V4L2-PIX-FMT-Y16">V4L2_PIX_FMT_Y16</link>     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
 
 /* Palette formats */
@@ -330,7 +324,11 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
 #define <link linkend="V4L2-PIX-FMT-SBGGR8">V4L2_PIX_FMT_SBGGR8</link>  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
 #define <link linkend="V4L2-PIX-FMT-SGBRG8">V4L2_PIX_FMT_SGBRG8</link>  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
 #define <link linkend="V4L2-PIX-FMT-SGRBG8">V4L2_PIX_FMT_SGRBG8</link>  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
-#define <link linkend="V4L2-PIX-FMT-SGRBG10">V4L2_PIX_FMT_SGRBG10</link> v4l2_fourcc('B', 'A', '1', '0') /* 10bit raw bayer */
+#define <link linkend="V4L2-PIX-FMT-SRGGB8">V4L2_PIX_FMT_SRGGB8</link>  v4l2_fourcc('R', 'G', 'G', 'B') /*  8  RGRG.. GBGB.. */
+#define <link linkend="V4L2-PIX-FMT-SBGGR10">V4L2_PIX_FMT_SBGGR10</link> v4l2_fourcc('B', 'G', '1', '0') /* 10  BGBG.. GRGR.. */
+#define <link linkend="V4L2-PIX-FMT-SGBRG10">V4L2_PIX_FMT_SGBRG10</link> v4l2_fourcc('G', 'B', '1', '0') /* 10  GBGB.. RGRG.. */
+#define <link linkend="V4L2-PIX-FMT-SGRBG10">V4L2_PIX_FMT_SGRBG10</link> v4l2_fourcc('B', 'A', '1', '0') /* 10  GRGR.. BGBG.. */
+#define <link linkend="V4L2-PIX-FMT-SRGGB10">V4L2_PIX_FMT_SRGGB10</link> v4l2_fourcc('R', 'G', '1', '0') /* 10  RGRG.. GBGB.. */
         /* 10bit raw bayer DPCM compressed to 8 bits */
 #define <link linkend="V4L2-PIX-FMT-SGRBG10DPCM8">V4L2_PIX_FMT_SGRBG10DPCM8</link> v4l2_fourcc('B', 'D', '1', '0')
         /*
@@ -346,6 +344,7 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
 #define <link linkend="V4L2-PIX-FMT-MPEG">V4L2_PIX_FMT_MPEG</link>     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4    */
 
 /*  Vendor-specific formats   */
+#define <link linkend="V4L2-PIX-FMT-CPIA1">V4L2_PIX_FMT_CPIA1</link>    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
 #define <link linkend="V4L2-PIX-FMT-WNVA">V4L2_PIX_FMT_WNVA</link>     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
 #define <link linkend="V4L2-PIX-FMT-SN9C10X">V4L2_PIX_FMT_SN9C10X</link>  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
 #define <link linkend="V4L2-PIX-FMT-SN9C20X-I420">V4L2_PIX_FMT_SN9C20X_I420</link> v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
@@ -358,12 +357,15 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
 #define <link linkend="V4L2-PIX-FMT-SPCA561">V4L2_PIX_FMT_SPCA561</link>  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
 #define <link linkend="V4L2-PIX-FMT-PAC207">V4L2_PIX_FMT_PAC207</link>   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
 #define <link linkend="V4L2-PIX-FMT-MR97310A">V4L2_PIX_FMT_MR97310A</link> v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
+#define <link linkend="V4L2-PIX-FMT-SN9C2028">V4L2_PIX_FMT_SN9C2028</link> v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
 #define <link linkend="V4L2-PIX-FMT-SQ905C">V4L2_PIX_FMT_SQ905C</link>   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
 #define <link linkend="V4L2-PIX-FMT-PJPG">V4L2_PIX_FMT_PJPG</link>     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
 #define <link linkend="V4L2-PIX-FMT-OV511">V4L2_PIX_FMT_OV511</link>    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
 #define <link linkend="V4L2-PIX-FMT-OV518">V4L2_PIX_FMT_OV518</link>    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
-#define <link linkend="V4L2-PIX-FMT-TM6000">V4L2_PIX_FMT_TM6000</link>   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
 #define <link linkend="V4L2-PIX-FMT-STV0680">V4L2_PIX_FMT_STV0680</link>  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
+#define <link linkend="V4L2-PIX-FMT-TM6000">V4L2_PIX_FMT_TM6000</link>   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
+#define <link linkend="V4L2-PIX-FMT-CIT-YYVYUY">V4L2_PIX_FMT_CIT_YYVYUY</link> v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
+#define <link linkend="V4L2-PIX-FMT-KONICA420">V4L2_PIX_FMT_KONICA420</link>  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
 
 /*
  *      F O R M A T   E N U M E R A T I O N
@@ -380,7 +382,7 @@ struct <link linkend="v4l2-fmtdesc">v4l2_fmtdesc</link> {
 #define V4L2_FMT_FLAG_COMPRESSED 0x0001
 #define V4L2_FMT_FLAG_EMULATED   0x0002
 
-#if 1 /*KEEP*/
+#if 1
         /* Experimental Frame Size and frame rate enumeration */
 /*
  *      F R A M E   S I Z E   E N U M E R A T I O N
@@ -544,6 +546,8 @@ struct <link linkend="v4l2-buffer">v4l2_buffer</link> {
 #define V4L2_BUF_FLAG_KEYFRAME  0x0008  /* Image is a keyframe (I-frame) */
 #define V4L2_BUF_FLAG_PFRAME    0x0010  /* Image is a P-frame */
 #define V4L2_BUF_FLAG_BFRAME    0x0020  /* Image is a B-frame */
+/* Buffer is ready, but the data contained within is corrupted. */
+#define V4L2_BUF_FLAG_ERROR     0x0040
 #define V4L2_BUF_FLAG_TIMECODE  0x0100  /* timecode field is valid */
 #define V4L2_BUF_FLAG_INPUT     0x0200  /* input field is valid */
 
@@ -934,6 +938,16 @@ struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link> {
 #define V4L2_CTRL_ID2CLASS(id)    ((id) &amp; 0x0fff0000UL)
 #define V4L2_CTRL_DRIVER_PRIV(id) (((id) &amp; 0xffff) &gt;= 0x1000)
 
+enum <link linkend="v4l2-ctrl-type">v4l2_ctrl_type</link> {
+        V4L2_CTRL_TYPE_INTEGER       = 1,
+        V4L2_CTRL_TYPE_BOOLEAN       = 2,
+        V4L2_CTRL_TYPE_MENU          = 3,
+        V4L2_CTRL_TYPE_BUTTON        = 4,
+        V4L2_CTRL_TYPE_INTEGER64     = 5,
+        V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
+        V4L2_CTRL_TYPE_STRING        = 7,
+};
+
 /*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
 struct <link linkend="v4l2-queryctrl">v4l2_queryctrl</link> {
         __u32                id;
@@ -1018,21 +1032,27 @@ enum <link linkend="v4l2-colorfx">v4l2_colorfx</link> {
         V4L2_COLORFX_NONE       = 0,
         V4L2_COLORFX_BW         = 1,
         V4L2_COLORFX_SEPIA      = 2,
-        V4L2_COLORFX_NEGATIVE   = 3,
-        V4L2_COLORFX_EMBOSS     = 4,
-        V4L2_COLORFX_SKETCH     = 5,
-        V4L2_COLORFX_SKY_BLUE   = 6,
+        V4L2_COLORFX_NEGATIVE = 3,
+        V4L2_COLORFX_EMBOSS = 4,
+        V4L2_COLORFX_SKETCH = 5,
+        V4L2_COLORFX_SKY_BLUE = 6,
         V4L2_COLORFX_GRASS_GREEN = 7,
         V4L2_COLORFX_SKIN_WHITEN = 8,
-        V4L2_COLORFX_VIVID      = 9.
+        V4L2_COLORFX_VIVID = 9,
 };
 #define V4L2_CID_AUTOBRIGHTNESS                 (V4L2_CID_BASE+32)
 #define V4L2_CID_BAND_STOP_FILTER               (V4L2_CID_BASE+33)
 
 #define V4L2_CID_ROTATE                         (V4L2_CID_BASE+34)
 #define V4L2_CID_BG_COLOR                       (V4L2_CID_BASE+35)
+
+#define V4L2_CID_CHROMA_GAIN                    (V4L2_CID_BASE+36)
+
+#define V4L2_CID_ILLUMINATORS_1                 (V4L2_CID_BASE+37)
+#define V4L2_CID_ILLUMINATORS_2                 (V4L2_CID_BASE+38)
+
 /* last CID + 1 */
-#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+36)
+#define V4L2_CID_LASTP1                         (V4L2_CID_BASE+39)
 
 /*  MPEG-class control IDs defined by V4L2 */
 #define V4L2_CID_MPEG_BASE                      (V4L2_CTRL_CLASS_MPEG | 0x900)
@@ -1349,6 +1369,8 @@ struct <link linkend="v4l2-modulator">v4l2_modulator</link> {
 #define V4L2_TUNER_CAP_SAP              0x0020
 #define V4L2_TUNER_CAP_LANG1            0x0040
 #define V4L2_TUNER_CAP_RDS              0x0080
+#define V4L2_TUNER_CAP_RDS_BLOCK_IO     0x0100
+#define V4L2_TUNER_CAP_RDS_CONTROLS     0x0200
 
 /*  Flags for the 'rxsubchans' field */
 #define V4L2_TUNER_SUB_MONO             0x0001
@@ -1378,7 +1400,8 @@ struct <link linkend="v4l2-hw-freq-seek">v4l2_hw_freq_seek</link> {
         enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link>  type;
         __u32                 seek_upward;
         __u32                 wrap_around;
-        __u32                 reserved[8];
+        __u32                 spacing;
+        __u32                 reserved[7];
 };
 
 /*
@@ -1433,7 +1456,7 @@ struct <link linkend="v4l2-audioout">v4l2_audioout</link> {
  *
  *      NOTE: EXPERIMENTAL API
  */
-#if 1 /*KEEP*/
+#if 1
 #define V4L2_ENC_IDX_FRAME_I    (0)
 #define V4L2_ENC_IDX_FRAME_P    (1)
 #define V4L2_ENC_IDX_FRAME_B    (2)
@@ -1626,6 +1649,38 @@ struct <link linkend="v4l2-streamparm">v4l2_streamparm</link> {
 };
 
 /*
+ *      E V E N T S
+ */
+
+#define V4L2_EVENT_ALL                          0
+#define V4L2_EVENT_VSYNC                        1
+#define V4L2_EVENT_EOS                          2
+#define V4L2_EVENT_PRIVATE_START                0x08000000
+
+/* Payload for V4L2_EVENT_VSYNC */
+struct <link linkend="v4l2-event-vsync">v4l2_event_vsync</link> {
+        /* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
+        __u8 field;
+} __attribute__ ((packed));
+
+struct <link linkend="v4l2-event">v4l2_event</link> {
+        __u32                           type;
+        union {
+                struct <link linkend="v4l2-event-vsync">v4l2_event_vsync</link> vsync;
+                __u8                    data[64];
+        } u;
+        __u32                           pending;
+        __u32                           sequence;
+        struct timespec                 timestamp;
+        __u32                           reserved[9];
+};
+
+struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link> {
+        __u32                           type;
+        __u32                           reserved[7];
+};
+
+/*
  *      A D V A N C E D   D E B U G G I N G
  *
  *      NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
@@ -1720,7 +1775,7 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> {
 #define VIDIOC_G_EXT_CTRLS      _IOWR('V', 71, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>)
 #define VIDIOC_S_EXT_CTRLS      _IOWR('V', 72, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>)
 #define VIDIOC_TRY_EXT_CTRLS    _IOWR('V', 73, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>)
-#if 1 /*KEEP*/
+#if 1
 #define VIDIOC_ENUM_FRAMESIZES  _IOWR('V', 74, struct <link linkend="v4l2-frmsizeenum">v4l2_frmsizeenum</link>)
 #define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct <link linkend="v4l2-frmivalenum">v4l2_frmivalenum</link>)
 #define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct <link linkend="v4l2-enc-idx">v4l2_enc_idx</link>)
@@ -1728,7 +1783,7 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> {
 #define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct <link linkend="v4l2-encoder-cmd">v4l2_encoder_cmd</link>)
 #endif
 
-#if 1 /*KEEP*/
+#if 1
 /* Experimental, meant for debugging, testing and internal use.
    Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
    You must be root to use these ioctls. Never use these in applications! */
@@ -1747,6 +1802,9 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> {
 #define VIDIOC_QUERY_DV_PRESET  _IOR('V',  86, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
 #define VIDIOC_S_DV_TIMINGS     _IOWR('V', 87, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
 #define VIDIOC_G_DV_TIMINGS     _IOWR('V', 88, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
+#define VIDIOC_DQEVENT           _IOR('V', 89, struct <link linkend="v4l2-event">v4l2_event</link>)
+#define VIDIOC_SUBSCRIBE_EVENT   _IOW('V', 90, struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link>)
+#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link>)
 
 /* Reminder: when adding new ioctls please add support for them to
    drivers/media/video/v4l2-compat-ioctl32.c as well! */
diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml
index 3c6784e132f3..d733721a7519 100644
--- a/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml
+++ b/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml
@@ -16,8 +16,7 @@
 	<funcdef>int <function>ioctl</function></funcdef>
 	<paramdef>int <parameter>fd</parameter></paramdef>
 	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>&v4l2-dv-preset;
-*<parameter>argp</parameter></paramdef>
+	<paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef>
       </funcprototype>
     </funcsynopsis>
   </refsynopsisdiv>
diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml
index ecc19576bb8f..d5ec6abf0ce2 100644
--- a/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml
+++ b/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml
@@ -16,8 +16,7 @@
 	<funcdef>int <function>ioctl</function></funcdef>
 	<paramdef>int <parameter>fd</parameter></paramdef>
 	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>&v4l2-dv-timings;
-*<parameter>argp</parameter></paramdef>
+	<paramdef>struct v4l2_dv_timings *<parameter>argp</parameter></paramdef>
       </funcprototype>
     </funcsynopsis>
   </refsynopsisdiv>
diff --git a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
index 402229ee06f6..d272f7ab91b8 100644
--- a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
+++ b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
@@ -16,7 +16,7 @@ input</refpurpose>
 	<funcdef>int <function>ioctl</function></funcdef>
 	<paramdef>int <parameter>fd</parameter></paramdef>
 	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>&v4l2-dv-preset; *<parameter>argp</parameter></paramdef>
+	<paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef>
       </funcprototype>
     </funcsynopsis>
   </refsynopsisdiv>
diff --git a/Documentation/DocBook/v4l/vidioc-querycap.xml b/Documentation/DocBook/v4l/vidioc-querycap.xml
index 6ab7e25b31b6..d499da93a450 100644
--- a/Documentation/DocBook/v4l/vidioc-querycap.xml
+++ b/Documentation/DocBook/v4l/vidioc-querycap.xml
@@ -184,7 +184,7 @@ data.</entry>
 	  <row>
 	    <entry><constant>V4L2_CAP_RDS_CAPTURE</constant></entry>
 	    <entry>0x00000100</entry>
-	    <entry>The device supports the <link linkend="rds">RDS</link> interface.</entry>
+	    <entry>The device supports the <link linkend="rds">RDS</link> capture interface.</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_CAP_VIDEO_OUTPUT_OVERLAY</constant></entry>
@@ -206,6 +206,11 @@ driver capabilities.</para></footnote></entry>
 hardware frequency seeking.</entry>
 	  </row>
 	  <row>
+	    <entry><constant>V4L2_CAP_RDS_OUTPUT</constant></entry>
+	    <entry>0x00000800</entry>
+	    <entry>The device supports the <link linkend="rds">RDS</link> output interface.</entry>
+	  </row>
+	  <row>
 	    <entry><constant>V4L2_CAP_TUNER</constant></entry>
 	    <entry>0x00010000</entry>
 	    <entry>The device has some sort of tuner to
diff --git a/Documentation/DocBook/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/v4l/vidioc-queryctrl.xml
index 8e0e055ac934..0d5e8283cf32 100644
--- a/Documentation/DocBook/v4l/vidioc-queryctrl.xml
+++ b/Documentation/DocBook/v4l/vidioc-queryctrl.xml
@@ -103,8 +103,12 @@ structure. The driver fills the rest of the structure or returns an
 <structfield>index</structfield> is invalid. Menu items are enumerated
 by calling <constant>VIDIOC_QUERYMENU</constant> with successive
 <structfield>index</structfield> values from &v4l2-queryctrl;
-<structfield>minimum</structfield> (0) to
-<structfield>maximum</structfield>, inclusive.</para>
+<structfield>minimum</structfield> to
+<structfield>maximum</structfield>, inclusive. Note that it is possible
+for <constant>VIDIOC_QUERYMENU</constant> to return an &EINVAL; for some
+indices between <structfield>minimum</structfield> and <structfield>maximum</structfield>.
+In that case that particular menu item is not supported by this driver. Also note that
+the <structfield>minimum</structfield> value is not necessarily 0.</para>
 
     <para>See also the examples in <xref linkend="control" />.</para>
 
@@ -139,7 +143,7 @@ string. This information is intended for the user.</entry>
 	    <entry><structfield>minimum</structfield></entry>
 	    <entry>Minimum value, inclusive. This field gives a lower
 bound for <constant>V4L2_CTRL_TYPE_INTEGER</constant> controls and the
-lowest valid index (always 0) for <constant>V4L2_CTRL_TYPE_MENU</constant> controls.
+lowest valid index for <constant>V4L2_CTRL_TYPE_MENU</constant> controls.
 For <constant>V4L2_CTRL_TYPE_STRING</constant> controls the minimum value
 gives the minimum length of the string. This length <emphasis>does not include the terminating
 zero</emphasis>. It may not be valid for any other type of control, including
@@ -279,7 +283,7 @@ values which are actually different on the hardware.</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_CTRL_TYPE_MENU</constant></entry>
-	    <entry>0</entry>
+	    <entry>&ge; 0</entry>
 	    <entry>1</entry>
 	    <entry>N-1</entry>
 	    <entry>The control has a menu of N choices. The names of
@@ -405,8 +409,10 @@ writing a value will cause the device to carry out a given action
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
 	  <para>The &v4l2-queryctrl; <structfield>id</structfield>
-is invalid. The &v4l2-querymenu; <structfield>id</structfield> or
-<structfield>index</structfield> is invalid.</para>
+is invalid. The &v4l2-querymenu; <structfield>id</structfield> is
+invalid or <structfield>index</structfield> is out of range (less than
+<structfield>minimum</structfield> or greater than <structfield>maximum</structfield>)
+or this particular menu item is not supported by the driver.</para>
 	</listitem>
       </varlistentry>
       <varlistentry>
diff --git a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml
index 14b3ec7ed75b..c30dcc4232c0 100644
--- a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml
+++ b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml
@@ -51,7 +51,8 @@
 
     <para>Start a hardware frequency seek from the current frequency.
 To do this applications initialize the <structfield>tuner</structfield>,
-<structfield>type</structfield>, <structfield>seek_upward</structfield> and
+<structfield>type</structfield>, <structfield>seek_upward</structfield>,
+<structfield>spacing</structfield> and
 <structfield>wrap_around</structfield> fields, and zero out the
 <structfield>reserved</structfield> array of a &v4l2-hw-freq-seek; and
 call the <constant>VIDIOC_S_HW_FREQ_SEEK</constant> ioctl with a pointer
@@ -89,7 +90,12 @@ field and the &v4l2-tuner; <structfield>index</structfield> field.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
-	    <entry><structfield>reserved</structfield>[8]</entry>
+	    <entry><structfield>spacing</structfield></entry>
+	    <entry>If non-zero, defines the hardware seek resolution in Hz. The driver selects the nearest value that is supported by the device. If spacing is zero a reasonable default value is used.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved</structfield>[7]</entry>
 	    <entry>Reserved for future extensions. Drivers and
 	    applications must set the array to zero.</entry>
 	  </row>
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 40ada93b820a..365bda9a0d94 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -187,7 +187,7 @@ apply a patch.
 If you do not know where you want to start, but you want to look for
 some task to start doing to join into the kernel development community,
 go to the Linux Kernel Janitor's project:
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors	
 It is a great place to start.  It describes a list of relatively simple
 problems that need to be cleaned up and fixed within the Linux kernel
 source tree.  Working with the developers in charge of this project, you
@@ -315,7 +315,7 @@ process is tracked with the tool patchwork.  Patchwork offers a web
 interface which shows patch postings, any comments on a patch or
 revisions to it, and maintainers can mark patches as under review,
 accepted, or rejected.  Most of these patchwork sites are listed at
-http://patchwork.kernel.org/ or http://patchwork.ozlabs.org/.
+http://patchwork.kernel.org/.
 
 2.6.x -next kernel tree for integration tests
 ---------------------------------------------
@@ -595,7 +595,7 @@ start exactly where you are now.
 
 ----------
 Thanks to Paolo Ciarrocchi who allowed the "Development Process"
-(http://linux.tar.bz/articles/2.6-development_process) section
+(http://lwn.net/Articles/94386/) section
 to be based on text he had written, and to Randy Dunlap and Gerrit
 Huizenga for some of the list of things you should and should not say.
 Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
index 7f6de6ea5b47..6148d4080f88 100644
--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@@ -581,7 +581,7 @@ to be handled by platform and generic code, not individual drivers.
 8. Vendor and device identifications
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-One is not not required to add new device ids to include/linux/pci_ids.h.
+One is not required to add new device ids to include/linux/pci_ids.h.
 Please add PCI_VENDOR_ID_xxx for vendors and a hex constant for device ids.
 
 PCI_VENDOR_ID_xxx constants are re-used. The device ids are arbitrary
diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt
index 5aea459e3dd6..c43460dade0f 100644
--- a/Documentation/RCU/RTFP.txt
+++ b/Documentation/RCU/RTFP.txt
@@ -606,7 +606,7 @@ Suparna Bhattacharya"
 ,Year="2006"
 ,pages="v2 123-138"
 ,note="Available:
-\url{http://www.linuxsymposium.org/2006/view_abstract.php?content_key=184}
+\url{http://www.linuxsymposium.org/2006/index_2006.php}
 \url{http://www.rdrop.com/users/paulmck/RCU/OLSrtRCU.2006.08.11a.pdf}
 [Viewed January 1, 2007]"
 ,annotation="
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index 790d1a812376..0c134f8afc6f 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -218,13 +218,22 @@ over a rather long period of time, but improvements are always welcome!
 	include:
 
 	a.	Keeping a count of the number of data-structure elements
-		used by the RCU-protected data structure, including those
-		waiting for a grace period to elapse.  Enforce a limit
-		on this number, stalling updates as needed to allow
-		previously deferred frees to complete.
-
-		Alternatively, limit only the number awaiting deferred
-		free rather than the total number of elements.
+		used by the RCU-protected data structure, including
+		those waiting for a grace period to elapse.  Enforce a
+		limit on this number, stalling updates as needed to allow
+		previously deferred frees to complete.	Alternatively,
+		limit only the number awaiting deferred free rather than
+		the total number of elements.
+
+		One way to stall the updates is to acquire the update-side
+		mutex.	(Don't try this with a spinlock -- other CPUs
+		spinning on the lock could prevent the grace period
+		from ever ending.)  Another way to stall the updates
+		is for the updates to use a wrapper function around
+		the memory allocator, so that this wrapper function
+		simulates OOM when there is too much memory awaiting an
+		RCU grace period.  There are of course many other
+		variations on this theme.
 
 	b.	Limiting update rate.  For example, if updates occur only
 		once per hour, then no explicit rate limiting is required,
@@ -365,3 +374,26 @@ over a rather long period of time, but improvements are always welcome!
 	and the compiler to freely reorder code into and out of RCU
 	read-side critical sections.  It is the responsibility of the
 	RCU update-side primitives to deal with this.
+
+17.	Use CONFIG_PROVE_RCU, CONFIG_DEBUG_OBJECTS_RCU_HEAD, and
+	the __rcu sparse checks to validate your RCU code.  These
+	can help find problems as follows:
+
+	CONFIG_PROVE_RCU: check that accesses to RCU-protected data
+		structures are carried out under the proper RCU
+		read-side critical section, while holding the right
+		combination of locks, or whatever other conditions
+		are appropriate.
+
+	CONFIG_DEBUG_OBJECTS_RCU_HEAD: check that you don't pass the
+		same object to call_rcu() (or friends) before an RCU
+		grace period has elapsed since the last time that you
+		passed that same object to call_rcu() (or friends).
+
+	__rcu sparse checks: tag the pointer to the RCU-protected data
+		structure with __rcu, and sparse will warn you if you
+		access that pointer without the services of one of the
+		variants of rcu_dereference().
+
+	These debugging aids can help you find problems that are
+	otherwise extremely difficult to spot.
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
index 44c6dcc93d6d..862c08ef1fde 100644
--- a/Documentation/RCU/stallwarn.txt
+++ b/Documentation/RCU/stallwarn.txt
@@ -80,6 +80,24 @@ o	A CPU looping with bottom halves disabled.  This condition can
 o	For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
 	without invoking schedule().
 
+o	A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might
+	happen to preempt a low-priority task in the middle of an RCU
+	read-side critical section.   This is especially damaging if
+	that low-priority task is not permitted to run on any other CPU,
+	in which case the next RCU grace period can never complete, which
+	will eventually cause the system to run out of memory and hang.
+	While the system is in the process of running itself out of
+	memory, you might see stall-warning messages.
+
+o	A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that
+	is running at a higher priority than the RCU softirq threads.
+	This will prevent RCU callbacks from ever being invoked,
+	and in a CONFIG_TREE_PREEMPT_RCU kernel will further prevent
+	RCU grace periods from ever completing.  Either way, the
+	system will eventually run out of memory and hang.  In the
+	CONFIG_TREE_PREEMPT_RCU case, you might see stall-warning
+	messages.
+
 o	A bug in the RCU implementation.
 
 o	A hardware failure.  This is quite unlikely, but has occurred
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index efd8cc95c06b..a851118775d8 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -125,6 +125,17 @@ o	"b" is the batch limit for this CPU.  If more than this number
 	of RCU callbacks is ready to invoke, then the remainder will
 	be deferred.
 
+o	"ci" is the number of RCU callbacks that have been invoked for
+	this CPU.  Note that ci+ql is the number of callbacks that have
+	been registered in absence of CPU-hotplug activity.
+
+o	"co" is the number of RCU callbacks that have been orphaned due to
+	this CPU going offline.
+
+o	"ca" is the number of RCU callbacks that have been adopted due to
+	other CPUs going offline.  Note that ci+co-ca+ql is the number of
+	RCU callbacks registered on this CPU.
+
 There is also an rcu/rcudata.csv file with the same information in
 comma-separated-variable spreadsheet format.
 
@@ -180,7 +191,7 @@ o	"s" is the "signaled" state that drives force_quiescent_state()'s
 
 o	"jfq" is the number of jiffies remaining for this grace period
 	before force_quiescent_state() is invoked to help push things
-	along.  Note that CPUs in dyntick-idle mode thoughout the grace
+	along.  Note that CPUs in dyntick-idle mode throughout the grace
 	period will not report on their own, but rather must be check by
 	some other CPU via force_quiescent_state().
 
diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers
index 4947fd8fb182..38d2aab59cac 100644
--- a/Documentation/SubmittingDrivers
+++ b/Documentation/SubmittingDrivers
@@ -161,7 +161,7 @@ How to NOT write kernel driver by Arjan van de Ven:
 	http://www.fenrus.org/how-to-not-write-a-device-driver-paper.pdf
 
 Kernel Janitor:
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors
 
 GIT, Fast Version Control System:
 	http://git-scm.com/
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 72651f788f4e..689e2371095c 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -98,6 +98,17 @@ system, git, as a "commit log".  See #15, below.
 If your description starts to get long, that's a sign that you probably
 need to split up your patch.  See #3, next.
 
+When you submit or resubmit a patch or patch series, include the
+complete patch description and justification for it.  Don't just
+say that this is version N of the patch (series).  Don't expect the
+patch merger to refer back to earlier patch versions or referenced
+URLs to find the patch description and put that into the patch.
+I.e., the patch (series) and its description should be self-contained.
+This benefits both the patch merger(s) and reviewers.  Some reviewers
+probably didn't even receive earlier versions of the patch.
+
+If the patch fixes a logged bug entry, refer to that bug entry by
+number and URL.
 
 
 3) Separate your changes.
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index 6e25c2659e0a..a2976a6de033 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -21,6 +21,7 @@
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <sys/socket.h>
+#include <sys/wait.h>
 #include <signal.h>
 
 #include <linux/genetlink.h>
@@ -266,11 +267,13 @@ int main(int argc, char *argv[])
 	int containerset = 0;
 	char containerpath[1024];
 	int cfd = 0;
+	int forking = 0;
+	sigset_t sigset;
 
 	struct msgtemplate msg;
 
-	while (1) {
-		c = getopt(argc, argv, "qdiw:r:m:t:p:vlC:");
+	while (!forking) {
+		c = getopt(argc, argv, "qdiw:r:m:t:p:vlC:c:");
 		if (c < 0)
 			break;
 
@@ -319,6 +322,28 @@ int main(int argc, char *argv[])
 				err(1, "Invalid pid\n");
 			cmd_type = TASKSTATS_CMD_ATTR_PID;
 			break;
+		case 'c':
+
+			/* Block SIGCHLD for sigwait() later */
+			if (sigemptyset(&sigset) == -1)
+				err(1, "Failed to empty sigset");
+			if (sigaddset(&sigset, SIGCHLD))
+				err(1, "Failed to set sigchld in sigset");
+			sigprocmask(SIG_BLOCK, &sigset, NULL);
+
+			/* fork/exec a child */
+			tid = fork();
+			if (tid < 0)
+				err(1, "Fork failed\n");
+			if (tid == 0)
+				if (execvp(argv[optind - 1],
+				    &argv[optind - 1]) < 0)
+					exit(-1);
+
+			/* Set the command type and avoid further processing */
+			cmd_type = TASKSTATS_CMD_ATTR_PID;
+			forking = 1;
+			break;
 		case 'v':
 			printf("debug on\n");
 			dbg = 1;
@@ -370,6 +395,15 @@ int main(int argc, char *argv[])
 		goto err;
 	}
 
+	/*
+	 * If we forked a child, wait for it to exit. Cannot use waitpid()
+	 * as all the delicious data would be reaped as part of the wait
+	 */
+	if (tid && forking) {
+		int sig_received;
+		sigwait(&sigset, &sig_received);
+	}
+
 	if (tid) {
 		rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
 			      cmd_type, &tid, sizeof(__u32));
diff --git a/Documentation/acpi/method-customizing.txt b/Documentation/acpi/method-customizing.txt
index e628cd23ca80..3e1d25aee3fb 100644
--- a/Documentation/acpi/method-customizing.txt
+++ b/Documentation/acpi/method-customizing.txt
@@ -19,6 +19,8 @@ Note: Only ACPI METHOD can be overridden, any other object types like
       "Device", "OperationRegion", are not recognized.
 Note: The same ACPI control method can be overridden for many times,
       and it's always the latest one that used by Linux/kernel.
+Note: To get the ACPI debug object output (Store (AAAA, Debug)),
+      please run "echo 1 > /sys/module/acpi/parameters/aml_debug_output".
 
 1. override an existing method
    a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT,
diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt
index 3a4dbe4663c9..b5aada9f20cc 100644
--- a/Documentation/aoe/aoe.txt
+++ b/Documentation/aoe/aoe.txt
@@ -1,6 +1,6 @@
 The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ...
 
-  http://www.coraid.com/support/linux/EtherDrive-2.6-HOWTO.html
+  http://www.coraid.com/SUPPORT/EtherDrive-HBA  
 
   It has many tips and hints!
 
diff --git a/Documentation/apparmor.txt b/Documentation/apparmor.txt
new file mode 100644
index 000000000000..93c1fd7d0635
--- /dev/null
+++ b/Documentation/apparmor.txt
@@ -0,0 +1,39 @@
+--- What is AppArmor? ---
+
+AppArmor is MAC style security extension for the Linux kernel.  It implements
+a task centered policy, with task "profiles" being created and loaded
+from user space.  Tasks on the system that do not have a profile defined for
+them run in an unconfined state which is equivalent to standard Linux DAC
+permissions.
+
+--- How to enable/disable ---
+
+set CONFIG_SECURITY_APPARMOR=y
+
+If AppArmor should be selected as the default security module then
+   set CONFIG_DEFAULT_SECURITY="apparmor"
+   and CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
+
+Build the kernel
+
+If AppArmor is not the default security module it can be enabled by passing
+security=apparmor on the kernel's command line.
+
+If AppArmor is the default security module it can be disabled by passing
+apparmor=0, security=XXXX (where XXX is valid security module), on the
+kernel's command line
+
+For AppArmor to enforce any restrictions beyond standard Linux DAC permissions
+policy must be loaded into the kernel from user space (see the Documentation
+and tools links).
+
+--- Documentation ---
+
+Documentation can be found on the wiki.
+
+--- Links ---
+
+Mailing List - apparmor@lists.ubuntu.com
+Wiki - http://apparmor.wiki.kernel.org/
+User space tools - https://launchpad.net/apparmor
+Kernel module - git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX
index 7f5fc3ba9c91..ecf7d04bca26 100644
--- a/Documentation/arm/00-INDEX
+++ b/Documentation/arm/00-INDEX
@@ -6,6 +6,8 @@ Interrupts
 	- ARM Interrupt subsystem documentation
 IXP2000
 	- Release Notes for Linux on Intel's IXP2000 Network Processor
+msm
+	- MSM specific documentation
 Netwinder
 	- Netwinder specific documentation
 Porting
diff --git a/Documentation/arm/IXP2000 b/Documentation/arm/IXP2000
index e0148b6b2c40..68d21d92a30b 100644
--- a/Documentation/arm/IXP2000
+++ b/Documentation/arm/IXP2000
@@ -14,7 +14,7 @@ telecom systems. In addition to an XScale core, it contains up to 8
 interfaces (UTOPIA, SPI, etc), a PCI host bridge, one serial port,
 flash interface, and some other odds and ends. For more information, see:
 
-http://developer.intel.com/design/network/products/npfamily/ixp2xxx.htm
+http://developer.intel.com
 
 2. Linux Support
 
diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx
index 72fbcc4fcab0..133c5fa6c7a1 100644
--- a/Documentation/arm/IXP4xx
+++ b/Documentation/arm/IXP4xx
@@ -45,7 +45,7 @@ require the use of Intel's propietary CSR softare:
 If you need to use any of the above, you need to download Intel's
 software from:
 
-   http://developer.intel.com/design/network/products/npfamily/ixp425swr1.htm
+   http://developer.intel.com/design/network/products/npfamily/ixp425.htm    
 
 DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPIETARY
 SOFTWARE.
@@ -53,7 +53,7 @@ SOFTWARE.
 There are several websites that provide directions/pointers on using
 Intel's software:
 
-http://ixp4xx-osdg.sourceforge.net/ 
+   http://sourceforge.net/projects/ixp4xx-osdg/
    Open Source Developer's Guide for using uClinux and the Intel libraries 
 
 http://gatewaymaker.sourceforge.net/ 
@@ -112,21 +112,21 @@ http://www.adiengineering.com/productsCoyote.html
    Finally, there is an IDE port hanging off the expansion bus.
 
 Gateworks Avila Network Platform
-http://www.gateworks.com/avila_sbc.htm
+http://www.gateworks.com/support/overview.php
 
    The Avila platform is basically and IXDP425 with the 4 PCI slots
    replaced with mini-PCI slots and a CF IDE interface hanging off
    the expansion bus.
 
 Intel IXDP425 Development Platform
-http://developer.intel.com/design/network/products/npfamily/ixdp425.htm
+http://www.intel.com/design/network/products/npfamily/ixdpg425.htm  
 
    This is Intel's standard reference platform for the IXDP425 and is 
    also known as the Richfield board. It contains 4 PCI slots, 16MB
    of flash, two 10/100 ports and one ADSL port.
 
 Intel IXDP465 Development Platform
-http://developer.intel.com/design/network/products/npfamily/ixdp465.htm
+http://www.intel.com/design/network/products/npfamily/ixdp465.htm
 
    This is basically an IXDP425 with an IXP465 and 32M of flash instead
    of just 16.
@@ -141,15 +141,13 @@ Intel IXDPG425 Development Platform
    a pivot_root to NFS.
 
 Motorola PrPMC1100 Processor Mezanine Card
-http://www.fountainsys.com/datasheet/PrPMC1100.pdf
+http://www.fountainsys.com
 
    The PrPMC1100 is based on the IXCP1100 and is meant to plug into
    and IXP2400/2800 system to act as the system controller. It simply
    contains a CPU and 16MB of flash on the board and needs to be
    plugged into a carrier board to function. Currently Linux only
    supports the Motorola PrPMC carrier board for this platform.
-   See https://mcg.motorola.com/us/ds/pdf/ds0144.pdf for info
-   on the carrier board.
 
 5. TODO LIST
 
diff --git a/Documentation/arm/README b/Documentation/arm/README
index d98783fbe0c7..aea34095cdcf 100644
--- a/Documentation/arm/README
+++ b/Documentation/arm/README
@@ -41,12 +41,12 @@ Bug reports etc
 ---------------
 
   Please send patches to the patch system.  For more information, see
-  http://www.arm.linux.org.uk/patches/info.html  Always include some
+  http://www.arm.linux.org.uk/developer/patches/info.php Always include some
   explanation as to what the patch does and why it is needed.
 
   Bug reports should be sent to linux-arm-kernel@lists.arm.linux.org.uk,
   or submitted through the web form at
-  http://www.arm.linux.org.uk/forms/solution.shtml
+  http://www.arm.linux.org.uk/developer/ 
 
   When sending bug reports, please ensure that they contain all relevant
   information, eg. the kernel messages that were printed before/during
diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/SA1100/Assabet
index 91f7ce7ba426..08b885d35674 100644
--- a/Documentation/arm/SA1100/Assabet
+++ b/Documentation/arm/SA1100/Assabet
@@ -2,8 +2,7 @@ The Intel Assabet (SA-1110 evaluation) board
 ============================================
 
 Please see:
-http://developer.intel.com/design/strong/quicklist/eval-plat/sa-1110.htm
-http://developer.intel.com/design/strong/guides/278278.htm
+http://developer.intel.com
 
 Also some notes from John G Dorsey <jd5q@andrew.cmu.edu>:
 http://www.cs.cmu.edu/~wearable/software/assabet.html
@@ -64,7 +63,7 @@ Initial RedBoot configuration
 -----------------------------
 
 The commands used here are explained in The RedBoot User's Guide available
-on-line at http://sources.redhat.com/ecos/docs-latest/redboot/redboot.html.
+on-line at http://sources.redhat.com/ecos/docs.html.
 Please refer to it for explanations.
 
 If you have a CF network card (my Assabet kit contained a CF+ LP-E from
diff --git a/Documentation/arm/SA1100/Brutus b/Documentation/arm/SA1100/Brutus
index b1cfd405dccc..6a3aa95e9bfd 100644
--- a/Documentation/arm/SA1100/Brutus
+++ b/Documentation/arm/SA1100/Brutus
@@ -1,7 +1,7 @@
 Brutus is an evaluation platform for the SA1100 manufactured by Intel.  
 For more details, see:
 
-http://developer.intel.com/design/strong/applnots/sa1100lx/getstart.htm
+http://developer.intel.com
 
 To compile for Brutus, you must issue the following commands:
 
diff --git a/Documentation/arm/SA1100/FreeBird b/Documentation/arm/SA1100/FreeBird
index eda28b3232e7..ab9193663b2b 100644
--- a/Documentation/arm/SA1100/FreeBird
+++ b/Documentation/arm/SA1100/FreeBird
@@ -1,6 +1,6 @@
-Freebird-1.1 is produced by Legned(C) ,Inc.
-(http://www.legend.com.cn)
-and software/linux mainatined by Coventive(C),Inc.
+Freebird-1.1 is produced by Legend(C), Inc.
+http://web.archive.org/web/*/http://www.legend.com.cn
+and software/linux maintained by Coventive(C), Inc.
 (http://www.coventive.com)
 
 Based on the Nicolas's strongarm kernel tree.
diff --git a/Documentation/arm/SA1100/GraphicsClient b/Documentation/arm/SA1100/GraphicsClient
index 6c9c4f5a36e1..867bb35943af 100644
--- a/Documentation/arm/SA1100/GraphicsClient
+++ b/Documentation/arm/SA1100/GraphicsClient
@@ -71,7 +71,7 @@ Supported peripherals:
 - serial ports (ttyS[0-2])
   - ttyS0 is default for serial console
 - Smart I/O (ADC, keypad, digital inputs, etc)
-  See http://www.applieddata.com/developers/linux for IOCTL documentation
+  See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
   and example user space code. ps/2 keybd is multiplexed through this driver
 
 To do:
diff --git a/Documentation/arm/SA1100/GraphicsMaster b/Documentation/arm/SA1100/GraphicsMaster
index ee7c6595f23f..9145088a0ba2 100644
--- a/Documentation/arm/SA1100/GraphicsMaster
+++ b/Documentation/arm/SA1100/GraphicsMaster
@@ -28,7 +28,7 @@ Supported peripherals:
 - serial ports (ttyS[0-2])
   - ttyS0 is default for serial console
 - Smart I/O (ADC, keypad, digital inputs, etc)
-  See http://www.applieddata.com/developers/linux for IOCTL documentation
+  See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
   and example user space code. ps/2 keybd is multiplexed through this driver
 
 To do:
diff --git a/Documentation/arm/SA1100/Itsy b/Documentation/arm/SA1100/Itsy
index 3b594534323b..44b94997fa0d 100644
--- a/Documentation/arm/SA1100/Itsy
+++ b/Documentation/arm/SA1100/Itsy
@@ -4,7 +4,7 @@ research projects at Compaq that are related to pocket computing.
 
 For more information, see:
 
-	http://www.research.digital.com/wrl/itsy/index.html
+	http://www.hpl.hp.com/downloads/crl/itsy/
 
 Notes on initial 2.4 Itsy support (8/27/2000) :
 The port was done on an Itsy version 1.5 machine with a daughtercard with
diff --git a/Documentation/arm/SA1100/PLEB b/Documentation/arm/SA1100/PLEB
index 92cae066908d..b9c8a631a351 100644
--- a/Documentation/arm/SA1100/PLEB
+++ b/Documentation/arm/SA1100/PLEB
@@ -6,6 +6,6 @@ PLEB support has yet to be fully integrated.
 
 For more information, see:
 
-	http://www.cse.unsw.edu.au/~pleb/
+	http://www.cse.unsw.edu.au
 
 
diff --git a/Documentation/arm/SA1100/Victor b/Documentation/arm/SA1100/Victor
index f938a29fdc20..9cff415da5a7 100644
--- a/Documentation/arm/SA1100/Victor
+++ b/Documentation/arm/SA1100/Victor
@@ -3,7 +3,7 @@ VisuAide, Inc. to be used by blind people.
 
 For more information related to Victor, see:
 
-	http://www.visuaide.com/victor
+	http://www.humanware.com/en-usa/products
 
 Of course Victor is using Linux as its main operating system.
 The Victor implementation for Linux is maintained by Nicolas Pitre:
diff --git a/Documentation/arm/SA1100/nanoEngine b/Documentation/arm/SA1100/nanoEngine
index fc431cbfefc2..48a7934f95f6 100644
--- a/Documentation/arm/SA1100/nanoEngine
+++ b/Documentation/arm/SA1100/nanoEngine
@@ -7,5 +7,5 @@ for more info.
 (Ref: Stuart Adams <sja@brightstareng.com>)
 
 Also visit Larry Doolittle's "Linux for the nanoEngine" site:
-http://recycle.lbl.gov/~ldoolitt/bse/
+http://www.brightstareng.com/arm/nanoeng.htm
 
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index eb0fae18ffb1..771d48d3b335 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -33,7 +33,13 @@ ffff0000	ffff0fff	CPU vector page.
 
 fffe0000	fffeffff	XScale cache flush area.  This is used
 				in proc-xscale.S to flush the whole data
-				cache.  Free for other usage on non-XScale.
+				cache. (XScale does not have TCM.)
+
+fffe8000	fffeffff	DTCM mapping area for platforms with
+				DTCM mounted inside the CPU.
+
+fffe0000	fffe7fff	ITCM mapping area for platforms with
+				ITCM mounted inside the CPU.
 
 fff00000	fffdffff	Fixmap mapping region.  Addresses provided
 				by fix_to_virt() will be located here.
diff --git a/Documentation/arm/msm/gpiomux.txt b/Documentation/arm/msm/gpiomux.txt
new file mode 100644
index 000000000000..67a81620adf6
--- /dev/null
+++ b/Documentation/arm/msm/gpiomux.txt
@@ -0,0 +1,176 @@
+This document provides an overview of the msm_gpiomux interface, which
+is used to provide gpio pin multiplexing and configuration on mach-msm
+targets.
+
+History
+=======
+
+The first-generation API for gpio configuration & multiplexing on msm
+is the function gpio_tlmm_config().  This function has a few notable
+shortcomings, which led to its deprecation and replacement by gpiomux:
+
+The 'disable' parameter:  Setting the second parameter to
+gpio_tlmm_config to GPIO_CFG_DISABLE tells the peripheral
+processor in charge of the subsystem to perform a look-up into a
+low-power table and apply the low-power/sleep setting for the pin.
+As the msm family evolved this became problematic. Not all pins
+have sleep settings, not all peripheral processors will accept requests
+to apply said sleep settings, and not all msm targets have their gpio
+subsystems managed by a peripheral processor. In order to get consistent
+behavior on all targets, drivers are forced to ignore this parameter,
+rendering it useless.
+
+The 'direction' flag: for all mux-settings other than raw-gpio (0),
+the output-enable bit of a gpio is hard-wired to a known
+input (usually VDD or ground).  For those settings, the direction flag
+is meaningless at best, and deceptive at worst.  In addition, using the
+direction flag to change output-enable (OE) directly can cause trouble in
+gpiolib, which has no visibility into gpio direction changes made
+in this way.  Direction control in gpio mode should be made through gpiolib.
+
+Key Features of gpiomux
+=======================
+
+- A consistent interface across all generations of msm.  Drivers can expect
+the same results on every target.
+- gpiomux plays nicely with gpiolib.  Functions that should belong to gpiolib
+are left to gpiolib and not duplicated here.  gpiomux is written with the
+intent that gpio_chips will call gpiomux reference-counting methods
+from their request() and free() hooks, providing full integration.
+- Tabular configuration.  Instead of having to call gpio_tlmm_config
+hundreds of times, gpio configuration is placed in a single table.
+- Per-gpio sleep.  Each gpio is individually reference counted, allowing only
+those lines which are in use to be put in high-power states.
+- 0 means 'do nothing': all flags are designed so that the default memset-zero
+equates to a sensible default of 'no configuration', preventing users
+from having to provide hundreds of 'no-op' configs for unused or
+unwanted lines.
+
+Usage
+=====
+
+To use gpiomux, provide configuration information for relevant gpio lines
+in the msm_gpiomux_configs table.  Since a 0 equates to "unconfigured",
+only those lines to be managed by gpiomux need to be specified.  Here
+is a completely fictional example:
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+	[12] = {
+		.active = GPIOMUX_VALID | GPIOMUX_DRV_8MA | GPIOMUX_FUNC_1,
+		.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
+	},
+	[34] = {
+		.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
+	},
+};
+
+To indicate that a gpio is in use, call msm_gpiomux_get() to increase
+its reference count.  To decrease the reference count, call msm_gpiomux_put().
+
+The effect of this configuration is as follows:
+
+When the system boots, gpios 12 and 34 will be initialized with their
+'suspended' configurations.  All other gpios, which were left unconfigured,
+will not be touched.
+
+When msm_gpiomux_get() is called on gpio 12 to raise its reference count
+above 0, its active configuration will be applied.  Since no other gpio
+line has a valid active configuration, msm_gpiomux_get() will have no
+effect on any other line.
+
+When msm_gpiomux_put() is called on gpio 12 or 34 to drop their reference
+count to 0, their suspended configurations will be applied.
+Since no other gpio line has a valid suspended configuration, no other
+gpio line will be effected by msm_gpiomux_put().  Since gpio 34 has no valid
+active configuration, this is effectively a no-op for gpio 34 as well,
+with one small caveat, see the section "About Output-Enable Settings".
+
+All of the GPIOMUX_VALID flags may seem like unnecessary overhead, but
+they address some important issues.  As unused entries (all those
+except 12 and 34) are zero-filled, gpiomux needs a way to distinguish
+the used fields from the unused.  In addition, the all-zero pattern
+is a valid configuration!  Therefore, gpiomux defines an additional bit
+which is used to indicate when a field is used.  This has the pleasant
+side-effect of allowing calls to msm_gpiomux_write to use '0' to indicate
+that a value should not be changed:
+
+  msm_gpiomux_write(0, GPIOMUX_VALID, 0);
+
+replaces the active configuration of gpio 0 with an all-zero configuration,
+but leaves the suspended configuration as it was.
+
+Static Configurations
+=====================
+
+To install a static configuration, which is applied at boot and does
+not change after that, install a configuration with a suspended component
+but no active component, as in the previous example:
+
+	[34] = {
+		.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
+	},
+
+The suspended setting is applied during boot, and the lack of any valid
+active setting prevents any other setting from being applied at runtime.
+If other subsystems attempting to access the line is a concern, one could
+*really* anchor the configuration down by calling msm_gpiomux_get on the
+line at initialization to move the line into active mode.  With the line
+held, it will never be re-suspended, and with no valid active configuration,
+no new configurations will be applied.
+
+But then, if having other subsystems grabbing for the line is truly a concern,
+it should be reserved with gpio_request instead, which carries an implicit
+msm_gpiomux_get.
+
+gpiomux and gpiolib
+===================
+
+It is expected that msm gpio_chips will call msm_gpiomux_get() and
+msm_gpiomux_put() from their request and free hooks, like this fictional
+example:
+
+static int request(struct gpio_chip *chip, unsigned offset)
+{
+        return msm_gpiomux_get(chip->base + offset);
+}
+
+static void free(struct gpio_chip *chip, unsigned offset)
+{
+        msm_gpiomux_put(chip->base + offset);
+}
+
+	...somewhere in a gpio_chip declaration...
+	.request = request,
+	.free    = free,
+
+This provides important functionality:
+- It guarantees that a gpio line will have its 'active' config applied
+  when the line is requested, and will not be suspended while the line
+  remains requested; and
+- It guarantees that gpio-direction settings from gpiolib behave sensibly.
+  See "About Output-Enable Settings."
+
+This mechanism allows for "auto-request" of gpiomux lines via gpiolib
+when it is suitable.  Drivers wishing more exact control are, of course,
+free to also use msm_gpiomux_set and msm_gpiomux_get.
+
+About Output-Enable Settings
+============================
+
+Some msm targets do not have the ability to query the current gpio
+configuration setting.  This means that changes made to the output-enable
+(OE) bit by gpiolib cannot be consistently detected and preserved by gpiomux.
+Therefore, when gpiomux applies a configuration setting, any direction
+settings which may have been applied by gpiolib are lost and the default
+input settings are re-applied.
+
+For this reason, drivers should not assume that gpio direction settings
+continue to hold if they free and then re-request a gpio.  This seems like
+common sense - after all, anybody could have obtained the line in the
+meantime - but it needs saying.
+
+This also means that calls to msm_gpiomux_write will reset the OE bit,
+which means that if the gpio line is held by a client of gpiolib and
+msm_gpiomux_write is called, the direction setting has been lost and
+gpiolib's internal state has been broken.
+Release gpio lines before reconfiguring them.
diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt
index 77fd9376e6d7..7c15871c1885 100644
--- a/Documentation/arm/tcm.txt
+++ b/Documentation/arm/tcm.txt
@@ -19,8 +19,8 @@ defines a CPUID_TCM register that you can read out from the
 system control coprocessor. Documentation from ARM can be found
 at http://infocenter.arm.com, search for "TCM Status Register"
 to see documents for all CPUs. Reading this register you can
-determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
-machine.
+determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
+in the machine.
 
 There is further a TCM region register (search for "TCM Region
 Registers" at the ARM site) that can report and modify the location
@@ -35,7 +35,15 @@ The TCM memory can then be remapped to another address again using
 the MMU, but notice that the TCM if often used in situations where
 the MMU is turned off. To avoid confusion the current Linux
 implementation will map the TCM 1 to 1 from physical to virtual
-memory in the location specified by the machine.
+memory in the location specified by the kernel. Currently Linux
+will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
+on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
+
+Newer versions of the region registers also support dividing these
+TCMs in two separate banks, so for example an 8KiB ITCM is divided
+into two 4KiB banks with its own control registers. The idea is to
+be able to lock and hide one of the banks for use by the secure
+world (TrustZone).
 
 TCM is used for a few things:
 
@@ -65,18 +73,18 @@ in <asm/tcm.h>. Using this interface it is possible to:
   memory. Such a heap is great for things like saving
   device state when shutting off device power domains.
 
-A machine that has TCM memory shall select HAVE_TCM in
-arch/arm/Kconfig for itself, and then the
-rest of the functionality will depend on the physical
-location and size of ITCM and DTCM to be defined in
-mach/memory.h for the machine. Code that needs to use
-TCM shall #include <asm/tcm.h> If the TCM is not located
-at the place given in memory.h it will be moved using
-the TCM Region registers.
+A machine that has TCM memory shall select HAVE_TCM from
+arch/arm/Kconfig for itself. Code that needs to use TCM shall
+#include <asm/tcm.h>
 
 Functions to go into itcm can be tagged like this:
 int __tcmfunc foo(int bar);
 
+Since these are marked to become long_calls and you may want
+to have functions called locally inside the TCM without
+wasting space, there is also the __tcmlocalfunc prefix that
+will make the call relative.
+
 Variables to go into dtcm can be tagged like this:
 int __tcmdata foo;
 
diff --git a/Documentation/binfmt_misc.txt b/Documentation/binfmt_misc.txt
index f609ebf9c78f..c1ed6948ba80 100644
--- a/Documentation/binfmt_misc.txt
+++ b/Documentation/binfmt_misc.txt
@@ -111,6 +111,6 @@ cause unexpected behaviour and can be a security hazard.
 
 
 There is a web page about binfmt_misc at
-http://www.tat.physik.uni-tuebingen.de/~rguenth/linux/binfmt_misc.html
+http://www.tat.physik.uni-tuebingen.de
 
 Richard Günther <rguenth@tat.physik.uni-tuebingen.de>
diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX
index c34e12440fec..2df0365f2dff 100644
--- a/Documentation/blackfin/00-INDEX
+++ b/Documentation/blackfin/00-INDEX
@@ -1,11 +1,8 @@
 00-INDEX
 	- This file
 
-cachefeatures.txt
-	- Supported cache features.
-
-Filesystems
-	- Requirements for mounting the root file system.
-
-bfin-gpio-note.txt
+bfin-gpio-notes.txt
 	- Notes in developing/using bfin-gpio driver.
+
+bfin-spi-notes.txt
+	- Notes for using bfin spi bus driver.
diff --git a/Documentation/blackfin/Filesystems b/Documentation/blackfin/Filesystems
deleted file mode 100644
index 51260a1b8032..000000000000
--- a/Documentation/blackfin/Filesystems
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * File:         Documentation/blackfin/Filesystems
- * Based on:
- * Author:
- *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
- *
- * Rev:          $Id: Filesystems 2384 2006-11-01 04:12:43Z magicyang $
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- */
-
-		How to mount the root file system in uClinux/Blackfin
-		-----------------------------------------------------
-
-1	Mounting EXT3 File system.
-	------------------------
-
-	Creating an EXT3 File system for uClinux/Blackfin:
-
-
-Please follow the steps to form the EXT3 File system and mount the same as root
-file system.
-
-a	Make an ext3 file system as large as you want the final root file
-	system.
-
-		mkfs.ext3  /dev/ram0 <your-rootfs-size-in-1k-blocks>
-
-b	Mount this Empty file system on a free directory as:
-
-		mount -t ext3 /dev/ram0  ./test
-			where ./test is the empty directory.
-
-c	Copy your root fs directory that you have so carefully made over.
-
-		cp -af  /tmp/my_final_rootfs_files/* ./test
-
-		(For ex: cp -af uClinux-dist/romfs/* ./test)
-
-d	If you have done everything right till now you should be able to see
-	the required "root" dir's (that's etc, root, bin, lib, sbin...)
-
-e	Now unmount the file system
-
-		umount  ./test
-
-f	Create the root file system image.
-
-		dd if=/dev/ram0 bs=1k count=<your-rootfs-size-in-1k-blocks> \
-		> ext3fs.img
-
-
-Now you have to tell the kernel that will be mounting this file system as
-rootfs.
-So do a make menuconfig under kernel and select the Ext3 journaling file system
-support under File system --> submenu.
-
-
-2.	Mounting EXT2 File system.
-	-------------------------
-
-By default the ext2 file system image will be created if you invoke make from
-the top uClinux-dist directory.
-
-
-3.	Mounting CRAMFS File System
-	----------------------------
-
-To create a CRAMFS file system image execute the command
-
-	mkfs.cramfs ./test cramfs.img
-
-	where ./test is the target directory.
-
-
-4.	Mounting ROMFS File System
-	--------------------------
-
-To create a ROMFS file system image execute the command
-
-	genromfs -v -V "ROMdisk" -f romfs.img -d ./test
-
-	where ./test is the target directory
-
-
-5.	Mounting the JFFS2 Filesystem
-	-----------------------------
-
-To create a compressed JFFS filesystem (JFFS2), please execute the command
-
-	mkfs.jffs2 -d ./test -o jffs2.img
-
-	where ./test is the target directory.
-
-However, please make sure the following is in your kernel config.
-
-/*
- * RAM/ROM/Flash chip drivers
- */
-#define CONFIG_MTD_CFI 1
-#define CONFIG_MTD_ROM 1
-/*
- * Mapping drivers for chip access
- */
-#define CONFIG_MTD_COMPLEX_MAPPINGS 1
-#define CONFIG_MTD_BF533 1
-#undef CONFIG_MTD_UCLINUX
-
-Through the u-boot boot loader, use the jffs2.img in the corresponding
-partition made in linux-2.6.x/drivers/mtd/maps/bf533_flash.c.
-
-NOTE - 	Currently the Flash driver is available only for EZKIT. Watch out for a
-	STAMP driver soon.
-
-
-6. 	Mounting the NFS File system
-	-----------------------------
-
-	For mounting the NFS please do the following in the kernel config.
-
-	In Networking Support --> Networking options --> TCP/IP networking -->
-		IP: kernel level autoconfiguration
-
-	Enable BOOTP Support.
-
-	In Kernel hacking --> Compiled-in kernel boot parameter add the following
-
-		root=/dev/nfs rw ip=bootp
-
-	In File system --> Network File system, Enable
-
-		NFS file system support --> NFSv3 client support
-		Root File system on NFS
-
-	in uClibc menuconfig, do the following
-	In Networking Support
-		enable Remote Procedure Call (RPC) support
-			Full RPC Support
-
-	On the Host side, ensure that /etc/dhcpd.conf looks something like this
-
-		ddns-update-style ad-hoc;
-		allow bootp;
-		subnet 10.100.4.0 netmask 255.255.255.0 {
-		default-lease-time 122209600;
-		max-lease-time 31557600;
-		group {
-			host bf533 {
-				hardware ethernet 00:CF:52:49:C3:01;
-				fixed-address 10.100.4.50;
-				option root-path "/home/nfsmount";
-			}
-		}
-
-	ensure that /etc/exports looks something like this
-		/home/nfsmount *(rw,no_root_squash,no_all_squash)
-
-	 run the following commands as root (may differ depending on your
-	 distribution) :
-		-  service nfs start
-		-  service portmap start
-		-  service dhcpd start
-		-  /usr/sbin/exportfs
diff --git a/Documentation/blackfin/bfin-spi-notes.txt b/Documentation/blackfin/bfin-spi-notes.txt
new file mode 100644
index 000000000000..556fa877f2e8
--- /dev/null
+++ b/Documentation/blackfin/bfin-spi-notes.txt
@@ -0,0 +1,14 @@
+SPI Chip Select behavior:
+
+With the Blackfin on-chip SPI peripheral, there is some logic tied to the CPHA
+bit whether the Slave Select Line is controlled by hardware (CPHA=0) or
+controlled by software (CPHA=1). However, the Linux SPI bus driver assumes that
+the Slave Select is always under software control and being asserted during
+the entire SPI transfer. - And not just bits_per_word duration.
+
+In most cases you can utilize SPI MODE_3 instead of MODE_0 to work-around this
+behavior. If your SPI slave device in question requires SPI MODE_0 or MODE_2
+timing, you can utilize the GPIO controlled SPI Slave Select option instead.
+
+You can even use the same pin whose peripheral role is a SSEL,
+but use it as a GPIO instead.
diff --git a/Documentation/blackfin/cachefeatures.txt b/Documentation/blackfin/cachefeatures.txt
deleted file mode 100644
index 75de51f94515..000000000000
--- a/Documentation/blackfin/cachefeatures.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * File:         Documentation/blackfin/cachefeatures.txt
- * Based on:
- * Author:
- *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
- *
- * Rev:          $Id: cachefeatures.txt 2384 2006-11-01 04:12:43Z magicyang $
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- */
-
-	- Instruction and Data cache initialization.
-		icache_init();
-		dcache_init();
-
-	-  Instruction and Data cache Invalidation Routines, when flushing the
-	   same is not required.
-		_icache_invalidate();
-		_dcache_invalidate();
-
-	Also, for invalidating the entire instruction and data cache, the below
-	routines are provided (another method for invalidation, refer page no 267 and 287 of
-	ADSP-BF533 Hardware Reference manual)
-
-		invalidate_entire_dcache();
-		invalidate_entire_icache();
-
-	-External Flushing of Instruction and data cache routines.
-
-		flush_instruction_cache();
-		flush_data_cache();
-
-	- Internal Flushing of Instruction and Data Cache.
-
-		icplb_flush();
-		dcplb_flush();
-
-	- Miscellaneous cache functions.
-
-		flush_cache_all();
-		flush_cache_mm();
-		invalidate_dcache_range();
-		flush_dcache_range();
-		flush_dcache_page();
-		flush_cache_range();
-		flush_cache_page();
-		invalidate_dcache_range();
-		flush_page_to_ram();
-
diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX
index a406286f6f3e..d111e3b23db0 100644
--- a/Documentation/block/00-INDEX
+++ b/Documentation/block/00-INDEX
@@ -1,7 +1,5 @@
 00-INDEX
 	- This file
-barrier.txt
-	- I/O Barriers
 biodoc.txt
 	- Notes on the Generic Block Layer Rewrite in Linux 2.5
 capability.txt
@@ -16,3 +14,5 @@ stat.txt
 	- Block layer statistics in /sys/block/<dev>/stat
 switching-sched.txt
 	- Switching I/O schedulers at runtime
+writeback_cache_control.txt
+	- Control of volatile write back caches
diff --git a/Documentation/block/barrier.txt b/Documentation/block/barrier.txt
deleted file mode 100644
index 2c2f24f634e4..000000000000
--- a/Documentation/block/barrier.txt
+++ /dev/null
@@ -1,261 +0,0 @@
-I/O Barriers
-============
-Tejun Heo <htejun@gmail.com>, July 22 2005
-
-I/O barrier requests are used to guarantee ordering around the barrier
-requests.  Unless you're crazy enough to use disk drives for
-implementing synchronization constructs (wow, sounds interesting...),
-the ordering is meaningful only for write requests for things like
-journal checkpoints.  All requests queued before a barrier request
-must be finished (made it to the physical medium) before the barrier
-request is started, and all requests queued after the barrier request
-must be started only after the barrier request is finished (again,
-made it to the physical medium).
-
-In other words, I/O barrier requests have the following two properties.
-
-1. Request ordering
-
-Requests cannot pass the barrier request.  Preceding requests are
-processed before the barrier and following requests after.
-
-Depending on what features a drive supports, this can be done in one
-of the following three ways.
-
-i. For devices which have queue depth greater than 1 (TCQ devices) and
-support ordered tags, block layer can just issue the barrier as an
-ordered request and the lower level driver, controller and drive
-itself are responsible for making sure that the ordering constraint is
-met.  Most modern SCSI controllers/drives should support this.
-
-NOTE: SCSI ordered tag isn't currently used due to limitation in the
-      SCSI midlayer, see the following random notes section.
-
-ii. For devices which have queue depth greater than 1 but don't
-support ordered tags, block layer ensures that the requests preceding
-a barrier request finishes before issuing the barrier request.  Also,
-it defers requests following the barrier until the barrier request is
-finished.  Older SCSI controllers/drives and SATA drives fall in this
-category.
-
-iii. Devices which have queue depth of 1.  This is a degenerate case
-of ii.  Just keeping issue order suffices.  Ancient SCSI
-controllers/drives and IDE drives are in this category.
-
-2. Forced flushing to physical medium
-
-Again, if you're not gonna do synchronization with disk drives (dang,
-it sounds even more appealing now!), the reason you use I/O barriers
-is mainly to protect filesystem integrity when power failure or some
-other events abruptly stop the drive from operating and possibly make
-the drive lose data in its cache.  So, I/O barriers need to guarantee
-that requests actually get written to non-volatile medium in order.
-
-There are four cases,
-
-i. No write-back cache.  Keeping requests ordered is enough.
-
-ii. Write-back cache but no flush operation.  There's no way to
-guarantee physical-medium commit order.  This kind of devices can't to
-I/O barriers.
-
-iii. Write-back cache and flush operation but no FUA (forced unit
-access).  We need two cache flushes - before and after the barrier
-request.
-
-iv. Write-back cache, flush operation and FUA.  We still need one
-flush to make sure requests preceding a barrier are written to medium,
-but post-barrier flush can be avoided by using FUA write on the
-barrier itself.
-
-
-How to support barrier requests in drivers
-------------------------------------------
-
-All barrier handling is done inside block layer proper.  All low level
-drivers have to are implementing its prepare_flush_fn and using one
-the following two functions to indicate what barrier type it supports
-and how to prepare flush requests.  Note that the term 'ordered' is
-used to indicate the whole sequence of performing barrier requests
-including draining and flushing.
-
-typedef void (prepare_flush_fn)(struct request_queue *q, struct request *rq);
-
-int blk_queue_ordered(struct request_queue *q, unsigned ordered,
-		      prepare_flush_fn *prepare_flush_fn);
-
-@q			: the queue in question
-@ordered		: the ordered mode the driver/device supports
-@prepare_flush_fn	: this function should prepare @rq such that it
-			  flushes cache to physical medium when executed
-
-For example, SCSI disk driver's prepare_flush_fn looks like the
-following.
-
-static void sd_prepare_flush(struct request_queue *q, struct request *rq)
-{
-	memset(rq->cmd, 0, sizeof(rq->cmd));
-	rq->cmd_type = REQ_TYPE_BLOCK_PC;
-	rq->timeout = SD_TIMEOUT;
-	rq->cmd[0] = SYNCHRONIZE_CACHE;
-	rq->cmd_len = 10;
-}
-
-The following seven ordered modes are supported.  The following table
-shows which mode should be used depending on what features a
-device/driver supports.  In the leftmost column of table,
-QUEUE_ORDERED_ prefix is omitted from the mode names to save space.
-
-The table is followed by description of each mode.  Note that in the
-descriptions of QUEUE_ORDERED_DRAIN*, '=>' is used whereas '->' is
-used for QUEUE_ORDERED_TAG* descriptions.  '=>' indicates that the
-preceding step must be complete before proceeding to the next step.
-'->' indicates that the next step can start as soon as the previous
-step is issued.
-
-	    write-back cache	ordered tag	flush		FUA
------------------------------------------------------------------------
-NONE		yes/no		N/A		no		N/A
-DRAIN		no		no		N/A		N/A
-DRAIN_FLUSH	yes		no		yes		no
-DRAIN_FUA	yes		no		yes		yes
-TAG		no		yes		N/A		N/A
-TAG_FLUSH	yes		yes		yes		no
-TAG_FUA		yes		yes		yes		yes
-
-
-QUEUE_ORDERED_NONE
-	I/O barriers are not needed and/or supported.
-
-	Sequence: N/A
-
-QUEUE_ORDERED_DRAIN
-	Requests are ordered by draining the request queue and cache
-	flushing isn't needed.
-
-	Sequence: drain => barrier
-
-QUEUE_ORDERED_DRAIN_FLUSH
-	Requests are ordered by draining the request queue and both
-	pre-barrier and post-barrier cache flushings are needed.
-
-	Sequence: drain => preflush => barrier => postflush
-
-QUEUE_ORDERED_DRAIN_FUA
-	Requests are ordered by draining the request queue and
-	pre-barrier cache flushing is needed.  By using FUA on barrier
-	request, post-barrier flushing can be skipped.
-
-	Sequence: drain => preflush => barrier
-
-QUEUE_ORDERED_TAG
-	Requests are ordered by ordered tag and cache flushing isn't
-	needed.
-
-	Sequence: barrier
-
-QUEUE_ORDERED_TAG_FLUSH
-	Requests are ordered by ordered tag and both pre-barrier and
-	post-barrier cache flushings are needed.
-
-	Sequence: preflush -> barrier -> postflush
-
-QUEUE_ORDERED_TAG_FUA
-	Requests are ordered by ordered tag and pre-barrier cache
-	flushing is needed.  By using FUA on barrier request,
-	post-barrier flushing can be skipped.
-
-	Sequence: preflush -> barrier
-
-
-Random notes/caveats
---------------------
-
-* SCSI layer currently can't use TAG ordering even if the drive,
-controller and driver support it.  The problem is that SCSI midlayer
-request dispatch function is not atomic.  It releases queue lock and
-switch to SCSI host lock during issue and it's possible and likely to
-happen in time that requests change their relative positions.  Once
-this problem is solved, TAG ordering can be enabled.
-
-* Currently, no matter which ordered mode is used, there can be only
-one barrier request in progress.  All I/O barriers are held off by
-block layer until the previous I/O barrier is complete.  This doesn't
-make any difference for DRAIN ordered devices, but, for TAG ordered
-devices with very high command latency, passing multiple I/O barriers
-to low level *might* be helpful if they are very frequent.  Well, this
-certainly is a non-issue.  I'm writing this just to make clear that no
-two I/O barrier is ever passed to low-level driver.
-
-* Completion order.  Requests in ordered sequence are issued in order
-but not required to finish in order.  Barrier implementation can
-handle out-of-order completion of ordered sequence.  IOW, the requests
-MUST be processed in order but the hardware/software completion paths
-are allowed to reorder completion notifications - eg. current SCSI
-midlayer doesn't preserve completion order during error handling.
-
-* Requeueing order.  Low-level drivers are free to requeue any request
-after they removed it from the request queue with
-blkdev_dequeue_request().  As barrier sequence should be kept in order
-when requeued, generic elevator code takes care of putting requests in
-order around barrier.  See blk_ordered_req_seq() and
-ELEVATOR_INSERT_REQUEUE handling in __elv_add_request() for details.
-
-Note that block drivers must not requeue preceding requests while
-completing latter requests in an ordered sequence.  Currently, no
-error checking is done against this.
-
-* Error handling.  Currently, block layer will report error to upper
-layer if any of requests in an ordered sequence fails.  Unfortunately,
-this doesn't seem to be enough.  Look at the following request flow.
-QUEUE_ORDERED_TAG_FLUSH is in use.
-
- [0] [1] [2] [3] [pre] [barrier] [post] < [4] [5] [6] ... >
-					  still in elevator
-
-Let's say request [2], [3] are write requests to update file system
-metadata (journal or whatever) and [barrier] is used to mark that
-those updates are valid.  Consider the following sequence.
-
- i.	Requests [0] ~ [post] leaves the request queue and enters
-	low-level driver.
- ii.	After a while, unfortunately, something goes wrong and the
-	drive fails [2].  Note that any of [0], [1] and [3] could have
-	completed by this time, but [pre] couldn't have been finished
-	as the drive must process it in order and it failed before
-	processing that command.
- iii.	Error handling kicks in and determines that the error is
-	unrecoverable and fails [2], and resumes operation.
- iv.	[pre] [barrier] [post] gets processed.
- v.	*BOOM* power fails
-
-The problem here is that the barrier request is *supposed* to indicate
-that filesystem update requests [2] and [3] made it safely to the
-physical medium and, if the machine crashes after the barrier is
-written, filesystem recovery code can depend on that.  Sadly, that
-isn't true in this case anymore.  IOW, the success of a I/O barrier
-should also be dependent on success of some of the preceding requests,
-where only upper layer (filesystem) knows what 'some' is.
-
-This can be solved by implementing a way to tell the block layer which
-requests affect the success of the following barrier request and
-making lower lever drivers to resume operation on error only after
-block layer tells it to do so.
-
-As the probability of this happening is very low and the drive should
-be faulty, implementing the fix is probably an overkill.  But, still,
-it's there.
-
-* In previous drafts of barrier implementation, there was fallback
-mechanism such that, if FUA or ordered TAG fails, less fancy ordered
-mode can be selected and the failed barrier request is retried
-automatically.  The rationale for this feature was that as FUA is
-pretty new in ATA world and ordered tag was never used widely, there
-could be devices which report to support those features but choke when
-actually given such requests.
-
- This was removed for two reasons 1. it's an overkill 2. it's
-impossible to implement properly when TAG ordering is used as low
-level drivers resume after an error automatically.  If it's ever
-needed adding it back and modifying low level drivers accordingly
-shouldn't be difficult.
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 508b5b2b0289..b9a83dd24732 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -7,7 +7,7 @@ Notes Written on Jan 15, 2002:
 
 Last Updated May 2, 2002
 September 2003: Updated I/O Scheduler portions
-	Nick Piggin <piggin@cyberone.com.au>
+	Nick Piggin <npiggin@kernel.dk>
 
 Introduction:
 
diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt
new file mode 100644
index 000000000000..e578feed6d81
--- /dev/null
+++ b/Documentation/block/cfq-iosched.txt
@@ -0,0 +1,45 @@
+CFQ ioscheduler tunables
+========================
+
+slice_idle
+----------
+This specifies how long CFQ should idle for next request on certain cfq queues
+(for sequential workloads) and service trees (for random workloads) before
+queue is expired and CFQ selects next queue to dispatch from.
+
+By default slice_idle is a non-zero value. That means by default we idle on
+queues/service trees. This can be very helpful on highly seeky media like
+single spindle SATA/SAS disks where we can cut down on overall number of
+seeks and see improved throughput.
+
+Setting slice_idle to 0 will remove all the idling on queues/service tree
+level and one should see an overall improved throughput on faster storage
+devices like multiple SATA/SAS disks in hardware RAID configuration. The down
+side is that isolation provided from WRITES also goes down and notion of
+IO priority becomes weaker.
+
+So depending on storage and workload, it might be useful to set slice_idle=0.
+In general I think for SATA/SAS disks and software RAID of SATA/SAS disks
+keeping slice_idle enabled should be useful. For any configurations where
+there are multiple spindles behind single LUN (Host based hardware RAID
+controller or for storage arrays), setting slice_idle=0 might end up in better
+throughput and acceptable latencies.
+
+CFQ IOPS Mode for group scheduling
+===================================
+Basic CFQ design is to provide priority based time slices. Higher priority
+process gets bigger time slice and lower priority process gets smaller time
+slice. Measuring time becomes harder if storage is fast and supports NCQ and
+it would be better to dispatch multiple requests from multiple cfq queues in
+request queue at a time. In such scenario, it is not possible to measure time
+consumed by single queue accurately.
+
+What is possible though is to measure number of requests dispatched from a
+single queue and also allow dispatch from multiple cfq queue at the same time.
+This effectively becomes the fairness in terms of IOPS (IO operations per
+second).
+
+If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches
+to IOPS mode and starts providing fairness in terms of number of requests
+dispatched. Note that this mode switching takes effect only for group
+scheduling. For non-cgroup users nothing should change.
diff --git a/Documentation/block/writeback_cache_control.txt b/Documentation/block/writeback_cache_control.txt
new file mode 100644
index 000000000000..83407d36630a
--- /dev/null
+++ b/Documentation/block/writeback_cache_control.txt
@@ -0,0 +1,86 @@
+
+Explicit volatile write back cache control
+=====================================
+
+Introduction
+------------
+
+Many storage devices, especially in the consumer market, come with volatile
+write back caches.  That means the devices signal I/O completion to the
+operating system before data actually has hit the non-volatile storage.  This
+behavior obviously speeds up various workloads, but it means the operating
+system needs to force data out to the non-volatile storage when it performs
+a data integrity operation like fsync, sync or an unmount.
+
+The Linux block layer provides two simple mechanisms that let filesystems
+control the caching behavior of the storage device.  These mechanisms are
+a forced cache flush, and the Force Unit Access (FUA) flag for requests.
+
+
+Explicit cache flushes
+----------------------
+
+The REQ_FLUSH flag can be OR ed into the r/w flags of a bio submitted from
+the filesystem and will make sure the volatile cache of the storage device
+has been flushed before the actual I/O operation is started.  This explicitly
+guarantees that previously completed write requests are on non-volatile
+storage before the flagged bio starts. In addition the REQ_FLUSH flag can be
+set on an otherwise empty bio structure, which causes only an explicit cache
+flush without any dependent I/O.  It is recommend to use
+the blkdev_issue_flush() helper for a pure cache flush.
+
+
+Forced Unit Access
+-----------------
+
+The REQ_FUA flag can be OR ed into the r/w flags of a bio submitted from the
+filesystem and will make sure that I/O completion for this request is only
+signaled after the data has been committed to non-volatile storage.
+
+
+Implementation details for filesystems
+--------------------------------------
+
+Filesystems can simply set the REQ_FLUSH and REQ_FUA bits and do not have to
+worry if the underlying devices need any explicit cache flushing and how
+the Forced Unit Access is implemented.  The REQ_FLUSH and REQ_FUA flags
+may both be set on a single bio.
+
+
+Implementation details for make_request_fn based block drivers
+--------------------------------------------------------------
+
+These drivers will always see the REQ_FLUSH and REQ_FUA bits as they sit
+directly below the submit_bio interface.  For remapping drivers the REQ_FUA
+bits need to be propagated to underlying devices, and a global flush needs
+to be implemented for bios with the REQ_FLUSH bit set.  For real device
+drivers that do not have a volatile cache the REQ_FLUSH and REQ_FUA bits
+on non-empty bios can simply be ignored, and REQ_FLUSH requests without
+data can be completed successfully without doing any work.  Drivers for
+devices with volatile caches need to implement the support for these
+flags themselves without any help from the block layer.
+
+
+Implementation details for request_fn based block drivers
+--------------------------------------------------------------
+
+For devices that do not support volatile write caches there is no driver
+support required, the block layer completes empty REQ_FLUSH requests before
+entering the driver and strips off the REQ_FLUSH and REQ_FUA bits from
+requests that have a payload.  For devices with volatile write caches the
+driver needs to tell the block layer that it supports flushing caches by
+doing:
+
+	blk_queue_flush(sdkp->disk->queue, REQ_FLUSH);
+
+and handle empty REQ_FLUSH requests in its prep_fn/request_fn.  Note that
+REQ_FLUSH requests with a payload are automatically turned into a sequence
+of an empty REQ_FLUSH request followed by the actual write by the block
+layer.  For devices that also support the FUA bit the block layer needs
+to be told to pass through the REQ_FUA bit using:
+
+	blk_queue_flush(sdkp->disk->queue, REQ_FLUSH | REQ_FUA);
+
+and the driver must handle write requests that have the REQ_FUA bit set
+in prep_fn/request_fn.  If the FUA bit is not natively supported the block
+layer turns it into an empty REQ_FLUSH request after the actual write.
diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.txt
index e4312676bdda..ee6717e3771d 100644
--- a/Documentation/blockdev/paride.txt
+++ b/Documentation/blockdev/paride.txt
@@ -412,6 +412,6 @@ have in your mail headers, when sending mail to the list server.
 You might also find some useful information on the linux-parport
 web pages (although they are not always up to date) at
 
-	http://www.torque.net/parport/
+	http://web.archive.org/web/*/http://www.torque.net/parport/
 
 
diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt
index 1c407778c8b2..13c251d5add6 100644
--- a/Documentation/cdrom/packet-writing.txt
+++ b/Documentation/cdrom/packet-writing.txt
@@ -95,7 +95,7 @@ Using the pktcdvd sysfs interface
 
 Since Linux 2.6.20, the pktcdvd module has a sysfs interface
 and can be controlled by it. For example the "pktcdvd" tool uses
-this interface. (see http://people.freenet.de/BalaGi#pktcdvd )
+this interface. (see http://tom.ist-im-web.de/download/pktcdvd )
 
 "pktcdvd" works similar to "pktsetup", e.g.:
 
diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt
index 48e0b21b0059..d6da611f8f63 100644
--- a/Documentation/cgroups/blkio-controller.txt
+++ b/Documentation/cgroups/blkio-controller.txt
@@ -8,12 +8,17 @@ both at leaf nodes as well as at intermediate nodes in a storage hierarchy.
 Plan is to use the same cgroup based management interface for blkio controller
 and based on user options switch IO policies in the background.
 
-In the first phase, this patchset implements proportional weight time based
-division of disk policy. It is implemented in CFQ. Hence this policy takes
-effect only on leaf nodes when CFQ is being used.
+Currently two IO control policies are implemented. First one is proportional
+weight time based division of disk policy. It is implemented in CFQ. Hence
+this policy takes effect only on leaf nodes when CFQ is being used. The second
+one is throttling policy which can be used to specify upper IO rate limits
+on devices. This policy is implemented in generic block layer and can be
+used on leaf nodes as well as higher level logical devices like device mapper.
 
 HOWTO
 =====
+Proportional Weight division of bandwidth
+-----------------------------------------
 You can do a very simple testing of running two dd threads in two different
 cgroups. Here is what you can do.
 
@@ -55,6 +60,35 @@ cgroups. Here is what you can do.
   group dispatched to the disk. We provide fairness in terms of disk time, so
   ideally io.disk_time of cgroups should be in proportion to the weight.
 
+Throttling/Upper Limit policy
+-----------------------------
+- Enable Block IO controller
+	CONFIG_BLK_CGROUP=y
+
+- Enable throttling in block layer
+	CONFIG_BLK_DEV_THROTTLING=y
+
+- Mount blkio controller
+        mount -t cgroup -o blkio none /cgroup/blkio
+
+- Specify a bandwidth rate on particular device for root group. The format
+  for policy is "<major>:<minor>  <byes_per_second>".
+
+        echo "8:16  1048576" > /cgroup/blkio/blkio.read_bps_device
+
+  Above will put a limit of 1MB/second on reads happening for root group
+  on device having major/minor number 8:16.
+
+- Run dd to read a file and see if rate is throttled to 1MB/s or not.
+
+		# dd if=/mnt/common/zerofile of=/dev/null bs=4K count=1024
+		# iflag=direct
+        1024+0 records in
+        1024+0 records out
+        4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
+
+ Limits for writes can be put using blkio.write_bps_device file.
+
 Various user visible config options
 ===================================
 CONFIG_BLK_CGROUP
@@ -68,8 +102,13 @@ CONFIG_CFQ_GROUP_IOSCHED
 	- Enables group scheduling in CFQ. Currently only 1 level of group
 	  creation is allowed.
 
+CONFIG_BLK_DEV_THROTTLING
+	- Enable block device throttling support in block layer.
+
 Details of cgroup files
 =======================
+Proportional weight policy files
+--------------------------------
 - blkio.weight
 	- Specifies per cgroup weight. This is default weight of the group
 	  on all the devices until and unless overridden by per device rule.
@@ -210,6 +249,67 @@ Details of cgroup files
 	  and minor number of the device and third field specifies the number
 	  of times a group was dequeued from a particular device.
 
+Throttling/Upper limit policy files
+-----------------------------------
+- blkio.throttle.read_bps_device
+	- Specifies upper limit on READ rate from the device. IO rate is
+	  specified in bytes per second. Rules are per deivce. Following is
+	  the format.
+
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.read_bps_device
+
+- blkio.throttle.write_bps_device
+	- Specifies upper limit on WRITE rate to the device. IO rate is
+	  specified in bytes per second. Rules are per deivce. Following is
+	  the format.
+
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.write_bps_device
+
+- blkio.throttle.read_iops_device
+	- Specifies upper limit on READ rate from the device. IO rate is
+	  specified in IO per second. Rules are per deivce. Following is
+	  the format.
+
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.read_iops_device
+
+- blkio.throttle.write_iops_device
+	- Specifies upper limit on WRITE rate to the device. IO rate is
+	  specified in io per second. Rules are per deivce. Following is
+	  the format.
+
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.write_iops_device
+
+Note: If both BW and IOPS rules are specified for a device, then IO is
+      subjectd to both the constraints.
+
+- blkio.throttle.io_serviced
+	- Number of IOs (bio) completed to/from the disk by the group (as
+	  seen by throttling policy). These are further divided by the type
+	  of operation - read or write, sync or async. First two fields specify
+	  the major and minor number of the device, third field specifies the
+	  operation type and the fourth field specifies the number of IOs.
+
+	  blkio.io_serviced does accounting as seen by CFQ and counts are in
+	  number of requests (struct request). On the other hand,
+	  blkio.throttle.io_serviced counts number of IO in terms of number
+	  of bios as seen by throttling policy.  These bios can later be
+	  merged by elevator and total number of requests completed can be
+	  lesser.
+
+- blkio.throttle.io_service_bytes
+	- Number of bytes transferred to/from the disk by the group. These
+	  are further divided by the type of operation - read or write, sync
+	  or async. First two fields specify the major and minor number of the
+	  device, third field specifies the operation type and the fourth field
+	  specifies the number of bytes.
+
+	  These numbers should roughly be same as blkio.io_service_bytes as
+	  updated by CFQ. The difference between two is that
+	  blkio.io_service_bytes will not be updated if CFQ is not operating
+	  on request queue.
+
+Common files among various policies
+-----------------------------------
 - blkio.reset_stats
 	- Writing an int to this file will result in resetting all the stats
 	  for that cgroup.
@@ -217,6 +317,7 @@ Details of cgroup files
 CFQ sysfs tunable
 =================
 /sys/block/<disk>/queue/iosched/group_isolation
+-----------------------------------------------
 
 If group_isolation=1, it provides stronger isolation between groups at the
 expense of throughput. By default group_isolation is 0. In general that
@@ -243,6 +344,33 @@ By default one should run with group_isolation=0. If that is not sufficient
 and one wants stronger isolation between groups, then set group_isolation=1
 but this will come at cost of reduced throughput.
 
+/sys/block/<disk>/queue/iosched/slice_idle
+------------------------------------------
+On a faster hardware CFQ can be slow, especially with sequential workload.
+This happens because CFQ idles on a single queue and single queue might not
+drive deeper request queue depths to keep the storage busy. In such scenarios
+one can try setting slice_idle=0 and that would switch CFQ to IOPS
+(IO operations per second) mode on NCQ supporting hardware.
+
+That means CFQ will not idle between cfq queues of a cfq group and hence be
+able to driver higher queue depth and achieve better throughput. That also
+means that cfq provides fairness among groups in terms of IOPS and not in
+terms of disk time.
+
+/sys/block/<disk>/queue/iosched/group_idle
+------------------------------------------
+If one disables idling on individual cfq queues and cfq service trees by
+setting slice_idle=0, group_idle kicks in. That means CFQ will still idle
+on the group in an attempt to provide fairness among groups.
+
+By default group_idle is same as slice_idle and does not do anything if
+slice_idle is enabled.
+
+One can experience an overall throughput drop if you have created multiple
+groups and put applications in that group which are not driving enough
+IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
+on individual groups and throughput should improve.
+
 What works
 ==========
 - Currently only sync IO queues are support. All the buffered writes are
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index b34823ff1646..190018b0c649 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -18,7 +18,8 @@ CONTENTS:
   1.2 Why are cgroups needed ?
   1.3 How are cgroups implemented ?
   1.4 What does notify_on_release do ?
-  1.5 How do I use cgroups ?
+  1.5 What does clone_children do ?
+  1.6 How do I use cgroups ?
 2. Usage Examples and Syntax
   2.1 Basic Usage
   2.2 Attaching processes
@@ -293,7 +294,16 @@ notify_on_release in the root cgroup at system boot is disabled
 value of their parents notify_on_release setting. The default value of
 a cgroup hierarchy's release_agent path is empty.
 
-1.5 How do I use cgroups ?
+1.5 What does clone_children do ?
+---------------------------------
+
+If the clone_children flag is enabled (1) in a cgroup, then all
+cgroups created beneath will call the post_clone callbacks for each
+subsystem of the newly created cgroup. Usually when this callback is
+implemented for a subsystem, it copies the values of the parent
+subsystem, this is the case for the cpuset.
+
+1.6 How do I use cgroups ?
 --------------------------
 
 To start a new job that is to be contained within a cgroup, using
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index 51682ab2dd1a..5d0d5692a365 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -691,7 +691,7 @@ There are ways to query or modify cpusets:
    cat, rmdir commands from the shell, or their equivalent from C.
  - via the C library libcpuset.
  - via the C library libcgroup.
-   (http://sourceforge.net/proects/libcg/)
+   (http://sourceforge.net/projects/libcg/)
  - via the python application cset.
    (http://developer.novell.com/wiki/index.php/Cpuset)
 
diff --git a/Documentation/coccinelle.txt b/Documentation/coccinelle.txt
new file mode 100644
index 000000000000..4a276ea7001c
--- /dev/null
+++ b/Documentation/coccinelle.txt
@@ -0,0 +1,286 @@
+Copyright 2010 Nicolas Palix <npalix@diku.dk>
+Copyright 2010 Julia Lawall <julia@diku.dk>
+Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
+
+
+ Getting Coccinelle
+~~~~~~~~~~~~~~~~~~~~
+
+The semantic patches included in the kernel use the 'virtual rule'
+feature which was introduced in Coccinelle version 0.1.11.
+
+Coccinelle (>=0.2.0) is available through the package manager
+of many distributions, e.g. :
+
+ - Debian (>=squeeze)
+ - Fedora (>=13)
+ - Ubuntu (>=10.04 Lucid Lynx)
+ - OpenSUSE
+ - Arch Linux
+ - NetBSD
+ - FreeBSD
+
+
+You can get the latest version released from the Coccinelle homepage at
+http://coccinelle.lip6.fr/
+
+Information and tips about Coccinelle are also provided on the wiki
+pages at http://cocci.ekstranet.diku.dk/wiki/doku.php
+
+Once you have it, run the following command:
+
+     	./configure
+        make
+
+as a regular user, and install it with
+
+        sudo make install
+
+
+ Using Coccinelle on the Linux kernel
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A Coccinelle-specific target is defined in the top level
+Makefile. This target is named 'coccicheck' and calls the 'coccicheck'
+front-end in the 'scripts' directory.
+
+Four modes are defined: patch, report, context, and org. The mode to
+use is specified by setting the MODE variable with 'MODE=<mode>'.
+
+'patch' proposes a fix, when possible.
+
+'report' generates a list in the following format:
+  file:line:column-column: message
+
+'context' highlights lines of interest and their context in a
+diff-like style.Lines of interest are indicated with '-'.
+
+'org' generates a report in the Org mode format of Emacs.
+
+Note that not all semantic patches implement all modes. For easy use
+of Coccinelle, the default mode is "chain" which tries the previous
+modes in the order above until one succeeds.
+
+To make a report for every semantic patch, run the following command:
+
+	make coccicheck MODE=report
+
+NB: The 'report' mode is the default one.
+
+To produce patches, run:
+
+	make coccicheck MODE=patch
+
+
+The coccicheck target applies every semantic patch available in the
+sub-directories of 'scripts/coccinelle' to the entire Linux kernel.
+
+For each semantic patch, a commit message is proposed.  It gives a
+description of the problem being checked by the semantic patch, and
+includes a reference to Coccinelle.
+
+As any static code analyzer, Coccinelle produces false
+positives. Thus, reports must be carefully checked, and patches
+reviewed.
+
+
+ Using Coccinelle with a single semantic patch
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The optional make variable COCCI can be used to check a single
+semantic patch. In that case, the variable must be initialized with
+the name of the semantic patch to apply.
+
+For instance:
+
+	make coccicheck COCCI=<my_SP.cocci> MODE=patch
+or
+	make coccicheck COCCI=<my_SP.cocci> MODE=report
+
+
+ Using Coccinelle on (modified) files
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To apply Coccinelle on a file basis, instead of a directory basis, the
+following command may be used:
+
+    make C=1 CHECK="scripts/coccicheck"
+
+To check only newly edited code, use the value 2 for the C flag, i.e.
+
+    make C=2 CHECK="scripts/coccicheck"
+
+This runs every semantic patch in scripts/coccinelle by default. The
+COCCI variable may additionally be used to only apply a single
+semantic patch as shown in the previous section.
+
+The "chain" mode is the default. You can select another one with the
+MODE variable explained above.
+
+In this mode, there is no information about semantic patches
+displayed, and no commit message proposed.
+
+
+ Proposing new semantic patches
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+New semantic patches can be proposed and submitted by kernel
+developers. For sake of clarity, they should be organized in the
+sub-directories of 'scripts/coccinelle/'.
+
+
+ Detailed description of the 'report' mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+'report' generates a list in the following format:
+  file:line:column-column: message
+
+Example:
+
+Running
+
+	make coccicheck MODE=report COCCI=scripts/coccinelle/api/err_cast.cocci
+
+will execute the following part of the SmPL script.
+
+<smpl>
+@r depends on !context && !patch && (org || report)@
+expression x;
+position p;
+@@
+
+ ERR_PTR@p(PTR_ERR(x))
+
+@script:python depends on report@
+p << r.p;
+x << r.x;
+@@
+
+msg="ERR_CAST can be used with %s" % (x)
+coccilib.report.print_report(p[0], msg)
+</smpl>
+
+This SmPL excerpt generates entries on the standard output, as
+illustrated below:
+
+/home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
+/home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
+/home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
+
+
+ Detailed description of the 'patch' mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When the 'patch' mode is available, it proposes a fix for each problem
+identified.
+
+Example:
+
+Running
+	make coccicheck MODE=patch COCCI=scripts/coccinelle/api/err_cast.cocci
+
+will execute the following part of the SmPL script.
+
+<smpl>
+@ depends on !context && patch && !org && !report @
+expression x;
+@@
+
+- ERR_PTR(PTR_ERR(x))
++ ERR_CAST(x)
+</smpl>
+
+This SmPL excerpt generates patch hunks on the standard output, as
+illustrated below:
+
+diff -u -p a/crypto/ctr.c b/crypto/ctr.c
+--- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
++++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
+@@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
+ 	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
+ 				  CRYPTO_ALG_TYPE_MASK);
+ 	if (IS_ERR(alg))
+-		return ERR_PTR(PTR_ERR(alg));
++		return ERR_CAST(alg);
+ 
+ 	/* Block size must be >= 4 bytes. */
+ 	err = -EINVAL;
+
+ Detailed description of the 'context' mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+'context' highlights lines of interest and their context
+in a diff-like style.
+
+NOTE: The diff-like output generated is NOT an applicable patch. The
+      intent of the 'context' mode is to highlight the important lines
+      (annotated with minus, '-') and gives some surrounding context
+      lines around. This output can be used with the diff mode of
+      Emacs to review the code.
+
+Example:
+
+Running
+	make coccicheck MODE=context COCCI=scripts/coccinelle/api/err_cast.cocci
+
+will execute the following part of the SmPL script.
+
+<smpl>
+@ depends on context && !patch && !org && !report@
+expression x;
+@@
+
+* ERR_PTR(PTR_ERR(x))
+</smpl>
+
+This SmPL excerpt generates diff hunks on the standard output, as
+illustrated below:
+
+diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
+--- /home/user/linux/crypto/ctr.c	2010-05-26 10:49:38.000000000 +0200
++++ /tmp/nothing
+@@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
+ 	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
+ 				  CRYPTO_ALG_TYPE_MASK);
+ 	if (IS_ERR(alg))
+-		return ERR_PTR(PTR_ERR(alg));
+ 
+ 	/* Block size must be >= 4 bytes. */
+ 	err = -EINVAL;
+
+ Detailed description of the 'org' mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+'org' generates a report in the Org mode format of Emacs.
+
+Example:
+
+Running
+	make coccicheck MODE=org COCCI=scripts/coccinelle/api/err_cast.cocci
+
+will execute the following part of the SmPL script.
+
+<smpl>
+@r depends on !context && !patch && (org || report)@
+expression x;
+position p;
+@@
+
+ ERR_PTR@p(PTR_ERR(x))
+
+@script:python depends on org@
+p << r.p;
+x << r.x;
+@@
+
+msg="ERR_CAST can be used with %s" % (x)
+msg_safe=msg.replace("[","@(").replace("]",")")
+coccilib.org.print_todo(p[0], msg_safe)
+</smpl>
+
+This SmPL excerpt generates Org entries on the standard output, as
+illustrated below:
+
+* TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
+* TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
+* TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index a99d7031cdf9..45d5a217484f 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -2,7 +2,7 @@
 
 		Maintainers:
 		CPU Hotplug Core:
-			Rusty Russell <rusty@rustycorp.com.au>
+			Rusty Russell <rusty@rustcorp.com.au>
 			Srivatsa Vaddagiri <vatsa@in.ibm.com>
 		i386:
 			Zwane Mwaikambo <zwane@arm.linux.org.uk>
diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt
index f1c5c4bccd3e..902d3151f527 100644
--- a/Documentation/cputopology.txt
+++ b/Documentation/cputopology.txt
@@ -14,25 +14,39 @@ to /proc/cpuinfo.
 	identifier (rather than the kernel's).  The actual value is
 	architecture and platform dependent.
 
-3) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
+3) /sys/devices/system/cpu/cpuX/topology/book_id:
+
+	the book ID of cpuX. Typically it is the hardware platform's
+	identifier (rather than the kernel's).	The actual value is
+	architecture and platform dependent.
+
+4) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
 
 	internel kernel map of cpuX's hardware threads within the same
 	core as cpuX
 
-4) /sys/devices/system/cpu/cpuX/topology/core_siblings:
+5) /sys/devices/system/cpu/cpuX/topology/core_siblings:
 
 	internal kernel map of cpuX's hardware threads within the same
 	physical_package_id.
 
+6) /sys/devices/system/cpu/cpuX/topology/book_siblings:
+
+	internal kernel map of cpuX's hardware threads within the same
+	book_id.
+
 To implement it in an architecture-neutral way, a new source file,
-drivers/base/topology.c, is to export the 4 attributes.
+drivers/base/topology.c, is to export the 4 or 6 attributes. The two book
+related sysfs files will only be created if CONFIG_SCHED_BOOK is selected.
 
 For an architecture to support this feature, it must define some of
 these macros in include/asm-XXX/topology.h:
 #define topology_physical_package_id(cpu)
 #define topology_core_id(cpu)
+#define topology_book_id(cpu)
 #define topology_thread_cpumask(cpu)
 #define topology_core_cpumask(cpu)
+#define topology_book_cpumask(cpu)
 
 The type of **_id is int.
 The type of siblings is (const) struct cpumask *.
@@ -45,6 +59,9 @@ not defined by include/asm-XXX/topology.h:
 3) thread_siblings: just the given CPU
 4) core_siblings: just the given CPU
 
+For architectures that don't support books (CONFIG_SCHED_BOOK) there are no
+default definitions for topology_book_id() and topology_book_cpumask().
+
 Additionally, CPU topology information is provided under
 /sys/devices/system/cpu and includes these files.  The internal
 source for the output is in brackets ("[]").
diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding
index a5a3450faaa0..2278693c8ffa 100644
--- a/Documentation/development-process/4.Coding
+++ b/Documentation/development-process/4.Coding
@@ -281,7 +281,7 @@ With sparse, the programmer can be warned about confusion between
 user-space and kernel-space addresses, mixture of big-endian and
 small-endian quantities, the passing of integer values where a set of bit
 flags is expected, and so on.  Sparse must be installed separately (it can
-be found at http://www.kernel.org/pub/software/devel/sparse/ if your
+be found at https://sparse.wiki.kernel.org/index.php/Main_Page if your
 distributor does not package it); it can then be run on the code by adding
 "C=1" to your make command.
 
diff --git a/Documentation/device-mapper/dm-crypt.txt b/Documentation/device-mapper/dm-crypt.txt
index 6680cab2c705..524de926290d 100644
--- a/Documentation/device-mapper/dm-crypt.txt
+++ b/Documentation/device-mapper/dm-crypt.txt
@@ -36,7 +36,7 @@ Example scripts
 ===============
 LUKS (Linux Unified Key Setup) is now the preferred way to set up disk
 encryption with dm-crypt using the 'cryptsetup' utility, see
-http://luks.endorphin.org/
+http://clemens.endorphin.org/cryptography
 
 [[
 #!/bin/sh
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 1d83d124056c..eccffe715229 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -239,6 +239,7 @@ Your cooperation is appreciated.
 		  0 = /dev/tty		Current TTY device
 		  1 = /dev/console	System console
 		  2 = /dev/ptmx		PTY master multiplex
+		  3 = /dev/ttyprintk	User messages via printk TTY device
 		 64 = /dev/cua0		Callout device for ttyS0
 		    ...
 		255 = /dev/cua191	Callout device for ttyS191
@@ -445,6 +446,7 @@ Your cooperation is appreciated.
 		233 = /dev/kmview	View-OS A process with a view
 		234 = /dev/btrfs-control	Btrfs control device
 		235 = /dev/autofs	Autofs control device
+		236 = /dev/mapper/control	Device-Mapper control device
 		240-254			Reserved for local use
 		255			Reserved for MISC_DYNAMIC_MINOR
 
@@ -1494,9 +1496,6 @@ Your cooperation is appreciated.
 		 64 = /dev/radio0	Radio device
 		    ...
 		127 = /dev/radio63	Radio device
-		192 = /dev/vtx0		Teletext device
-		    ...
-		223 = /dev/vtx31	Teletext device
 		224 = /dev/vbi0		Vertical blank interrupt
 		    ...
 		255 = /dev/vbi31	Vertical blank interrupt
@@ -1517,7 +1516,7 @@ Your cooperation is appreciated.
 		    ...
 
 		The driver and documentation may be obtained from
-		http://www.proximity.com.au/~brian/winradio/
+		http://www.winradio.com/
 
  82 block	I2O hard disk
 		  0 = /dev/i2o/hdag	33rd I2O hard disk, whole disk
@@ -1723,7 +1722,7 @@ Your cooperation is appreciated.
 		  1 = /dev/comedi1	Second comedi device
 		    ...
 
-		See http://stm.lbl.gov/comedi or http://www.llp.fu-berlin.de/.
+		See http://stm.lbl.gov/comedi.
 
  98 block	User-mode virtual block device
 		  0 = /dev/ubda		First user-mode block device
@@ -1984,7 +1983,7 @@ Your cooperation is appreciated.
                 256 NetWare volumes can be supported in a single
                 machine.
 
-                http://www.kernel.org/pub/linux/kernel/people/jmerkey/nwfs
+                http://cgfa.telepac.pt/ftp2/kernel.org/linux/kernel/people/jmerkey/nwfs/
 
                 0 = /dev/nwfs/v0    First NetWare (NWFS) Logical Volume
                 1 = /dev/nwfs/v1    Second NetWare (NWFS) Logical Volume
@@ -2518,6 +2517,12 @@ Your cooperation is appreciated.
 		  8 = /dev/mmcblk1      Second SD/MMC card
 		    ...
 
+		The start of next SD/MMC card can be configured with
+		CONFIG_MMC_BLOCK_MINORS, or overridden at boot/modprobe
+		time using the mmcblk.perdev_minors option. That would
+		bump the offset between each card to be the configured
+		value instead of the default 8.
+
 179 char	CCube DVXChip-based PCI products
 		  0 = /dev/dvxirq0	First DVX device
 		  1 = /dev/dvxirq1	Second DVX device
@@ -2552,7 +2557,10 @@ Your cooperation is appreciated.
 		175 = /dev/usb/legousbtower15	16th USB Legotower device
 		176 = /dev/usb/usbtmc1	First USB TMC device
 		   ...
-		192 = /dev/usb/usbtmc16	16th USB TMC device
+		191 = /dev/usb/usbtmc16	16th USB TMC device
+		192 = /dev/usb/yurex1	First USB Yurex device
+		   ...
+		209 = /dev/usb/yurex16	16th USB Yurex device
 		240 = /dev/usb/dabusb0	First daubusb device
 		    ...
 		243 = /dev/usb/dabusb3	Fourth dabusb device
@@ -2591,7 +2599,8 @@ Your cooperation is appreciated.
 		  1 = /dev/intermezzo1	Second cache manager
 		    ...
 
-		See http://www.inter-mezzo.org/ for more information.
+		See http://web.archive.org/web/20080115195241/
+		http://inter-mezzo.org/index.html
 
 186 char	Object-based storage control device
 		  0 = /dev/obd0		First obd control device
diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt
index 2511a335abd6..121832e5d899 100644
--- a/Documentation/dvb/faq.txt
+++ b/Documentation/dvb/faq.txt
@@ -76,7 +76,7 @@ Some very frequently asked questions about linuxtv-dvb
 		the TuxBox CVS many interesting DVB applications and the dBox2
 		DVB source
 
-	http://sourceforge.net/projects/dvbsak/
+	http://www.linuxtv.org/downloads/	
 		DVB Swiss Army Knife library and utilities
 
 	http://www.nenie.org/misc/mpsys/
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 239cbdbf4d12..59690de8ebfe 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -26,7 +26,8 @@ use IO::Handle;
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
 		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
-		"af9015", "ngene");
+		"af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395",
+		"lme2510c_s7395_old");
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -518,11 +519,11 @@ sub bluebird {
 sub af9015 {
 	my $sourcefile = "download.ashx?file=57";
 	my $url = "http://www.ite.com.tw/EN/Services/$sourcefile";
-	my $hash = "ff5b096ed47c080870eacdab2de33ad6";
+	my $hash = "e3f08935158038d385ad382442f4bb2d";
 	my $outfile = "dvb-usb-af9015.fw";
 	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
-	my $fwoffset = 0x22708;
-	my $fwlength = 18225;
+	my $fwoffset = 0x25690;
+	my $fwlength = 18725;
 	my ($chunklength, $buf, $rcount);
 
 	checkstandard();
@@ -567,6 +568,66 @@ sub ngene {
     "$file1, $file2";
 }
 
+sub az6027{
+    my $file = "AZ6027_Linux_Driver.tar.gz";
+    my $url = "http://linux.terratec.de/files/$file";
+    my $firmware = "dvb-usb-az6027-03.fw";
+
+    wgetfile($file, $url);
+
+    #untar
+    if( system("tar xzvf $file $firmware")){
+        die "failed to untar firmware";
+    }
+    if( system("rm $file")){
+        die ("unable to remove unnecessary files");
+    }
+
+    $firmware;
+}
+
+sub lme2510_lg {
+    my $sourcefile = "LMEBDA_DVBS.sys";
+    my $hash = "fc6017ad01e79890a97ec53bea157ed2";
+    my $outfile = "dvb-usb-lme2510-lg.fw";
+    my $hasho = "caa065d5fdbd2c09ad57b399bbf55cad";
+
+    checkstandard();
+
+    verify($sourcefile, $hash);
+    extract($sourcefile, 4168, 3841, $outfile);
+    verify($outfile, $hasho);
+    $outfile;
+}
+
+sub lme2510c_s7395 {
+    my $sourcefile = "US2A0D.sys";
+    my $hash = "b0155a8083fb822a3bd47bc360e74601";
+    my $outfile = "dvb-usb-lme2510c-s7395.fw";
+    my $hasho = "3a3cf1aeebd17b6ddc04cebe131e94cf";
+
+    checkstandard();
+
+    verify($sourcefile, $hash);
+    extract($sourcefile, 37248, 3720, $outfile);
+    verify($outfile, $hasho);
+    $outfile;
+}
+
+sub lme2510c_s7395_old {
+    my $sourcefile = "LMEBDA_DVBS7395C.sys";
+    my $hash = "7572ae0eb9cdf91baabd7c0ba9e09b31";
+    my $outfile = "dvb-usb-lme2510c-s7395.fw";
+    my $hasho = "90430c5b435eb5c6f88fd44a9d950674";
+
+    checkstandard();
+
+    verify($sourcefile, $hash);
+    extract($sourcefile, 4208, 3881, $outfile);
+    verify($outfile, $hasho);
+    $outfile;
+}
+
 # ---------------------------------------------------------------
 # Utilities
 
diff --git a/Documentation/dvb/lmedm04.txt b/Documentation/dvb/lmedm04.txt
new file mode 100644
index 000000000000..e175784b89bf
--- /dev/null
+++ b/Documentation/dvb/lmedm04.txt
@@ -0,0 +1,58 @@
+To extract firmware for the DM04/QQBOX you need to copy the
+following file(s) to this directory.
+
+for DM04+/QQBOX LME2510C (Sharp 7395 Tuner)
+-------------------------------------------
+
+The Sharp 7395 driver can be found in windows/system32/driver
+
+US2A0D.sys (dated 17 Mar 2009)
+
+
+and run
+./get_dvb_firmware lme2510c_s7395
+
+	will produce
+	dvb-usb-lme2510c-s7395.fw
+
+An alternative but older firmware can be found on the driver
+disk DVB-S_EN_3.5A in BDADriver/driver
+
+LMEBDA_DVBS7395C.sys (dated 18 Jan 2008)
+
+and run
+./get_dvb_firmware lme2510c_s7395_old
+
+	will produce
+	dvb-usb-lme2510c-s7395.fw
+
+--------------------------------------------------------------------
+
+The LG firmware can be found on the driver
+disk DM04+_5.1A[LG] in BDADriver/driver
+
+for DM04 LME2510 (LG Tuner)
+---------------------------
+
+LMEBDA_DVBS.sys (dated 13 Nov 2007)
+
+and run
+./get_dvb_firmware lme2510_lg
+
+	will produce
+	dvb-usb-lme2510-lg.fw
+
+
+Other LG firmware can be extracted manually from US280D.sys
+only found in windows/system32/driver.
+
+dd if=US280D.sys ibs=1 skip=42616 count=3668 of=dvb-usb-lme2510-lg.fw
+
+for DM04 LME2510C (LG Tuner)
+---------------------------
+
+dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw
+
+---------------------------------------------------------------------
+
+Copy the firmware file(s) to /lib/firmware
diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt
index 674c5663d346..58ea64a96165 100644
--- a/Documentation/dynamic-debug-howto.txt
+++ b/Documentation/dynamic-debug-howto.txt
@@ -24,7 +24,7 @@ Dynamic debug has even more useful features:
    read to display the complete list of known debug statements, to help guide you
 
 Controlling dynamic debug Behaviour
-===============================
+===================================
 
 The behaviour of pr_debug()/dev_debug()s are controlled via writing to a
 control file in the 'debugfs' filesystem. Thus, you must first mount the debugfs
@@ -212,6 +212,26 @@ Note the regexp ^[-+=][scp]+$ matches a flags specification.
 Note also that there is no convenient syntax to remove all
 the flags at once, you need to use "-psc".
 
+
+Debug messages during boot process
+==================================
+
+To be able to activate debug messages during the boot process,
+even before userspace and debugfs exists, use the boot parameter:
+ddebug_query="QUERY"
+
+QUERY follows the syntax described above, but must not exceed 1023
+characters. The enablement of debug messages is done as an arch_initcall.
+Thus you can enable debug messages in all code processed after this
+arch_initcall via this boot parameter.
+On an x86 system for example ACPI enablement is a subsys_initcall and
+ddebug_query="file ec.c +p"
+will show early Embedded Controller transactions during ACPI setup if
+your machine (typically a laptop) has an Embedded Controller.
+PCI (or other devices) initialization also is a hot candidate for using
+this boot parameter for debugging purposes.
+
+
 Examples
 ========
 
diff --git a/Documentation/fb/framebuffer.txt b/Documentation/fb/framebuffer.txt
index fe79e3c8847d..58c5ae2e9f59 100644
--- a/Documentation/fb/framebuffer.txt
+++ b/Documentation/fb/framebuffer.txt
@@ -330,7 +330,7 @@ and on its mirrors.
 
 The latest version of fbset can be found at
 
-    http://home.tvd.be/cr26864/Linux/fbdev/
+    http://www.linux-fbdev.org/ 
 
   
 10. Credits                                                       
diff --git a/Documentation/fb/viafb.txt b/Documentation/fb/viafb.txt
index f3e046a6a987..1a2e8aa3fbb1 100644
--- a/Documentation/fb/viafb.txt
+++ b/Documentation/fb/viafb.txt
@@ -197,6 +197,54 @@ Notes:
        example,
            # fbset -depth 16
 
+
+[Configure viafb via /proc]
+---------------------------
+    The following files exist in /proc/viafb
+
+    supported_output_devices
+
+        This read-only file contains a full ',' seperated list containing all
+        output devices that could be available on your platform. It is likely
+        that not all of those have a connector on your hardware but it should
+        provide a good starting point to figure out which of those names match
+        a real connector.
+        Example:
+        # cat /proc/viafb/supported_output_devices
+
+    iga1/output_devices
+    iga2/output_devices
+
+        These two files are readable and writable. iga1 and iga2 are the two
+        independent units that produce the screen image. Those images can be
+        forwarded to one or more output devices. Reading those files is a way
+        to query which output devices are currently used by an iga.
+        Example:
+        # cat /proc/viafb/iga1/output_devices
+        If there are no output devices printed the output of this iga is lost.
+        This can happen for example if only one (the other) iga is used.
+        Writing to these files allows adjusting the output devices during
+        runtime. One can add new devices, remove existing ones or switch
+        between igas. Essentially you can write a ',' seperated list of device
+        names (or a single one) in the same format as the output to those
+        files. You can add a '+' or '-' as a prefix allowing simple addition
+        and removal of devices. So a prefix '+' adds the devices from your list
+        to the already existing ones, '-' removes the listed devices from the
+        existing ones and if no prefix is given it replaces all existing ones
+        with the listed ones. If you remove devices they are expected to turn
+        off. If you add devices that are already part of the other iga they are
+        removed there and added to the new one.
+        Examples:
+        Add CRT as output device to iga1
+        # echo +CRT > /proc/viafb/iga1/output_devices
+
+        Remove (turn off) DVP1 and LVDS1 as output devices of iga2
+        # echo -DVP1,LVDS1 > /proc/viafb/iga2/output_devices
+
+        Replace all iga1 output devices by CRT
+        # echo CRT > /proc/viafb/iga1/output_devices
+
+
 [Bootup with viafb]:
 --------------------
     Add the following line to your grub.conf:
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 1571c0c83dba..d8f36f984faa 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -93,12 +93,12 @@ Why:	Broken design for runtime control over driver power states, confusing
 	inputs.  This framework was never widely used, and most attempts to
 	use it were broken.  Drivers should instead be exposing domain-specific
 	interfaces either to kernel or to userspace.
-Who:	Pavel Machek <pavel@suse.cz>
+Who:	Pavel Machek <pavel@ucw.cz>
 
 ---------------------------
 
 What:	Video4Linux API 1 ioctls and from Video devices.
-When:	July 2009
+When:	kernel 2.6.38
 Files:	include/linux/videodev.h
 Check:	include/linux/videodev.h
 Why:	V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
@@ -116,26 +116,18 @@ Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
 
 ---------------------------
 
-What:	PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
-When:	2.6.35/2.6.36
-Files:	drivers/pcmcia/: pcmcia_ioctl.c
-Why:	With the 16-bit PCMCIA subsystem now behaving (almost) like a
-	normal hotpluggable bus, and with it using the default kernel
-	infrastructure (hotplug, driver core, sysfs) keeping the PCMCIA
-	control ioctl needed by cardmgr and cardctl from pcmcia-cs is
-	unnecessary and potentially harmful (it does not provide for
-	proper locking), and makes further cleanups and integration of the
-	PCMCIA subsystem into the Linux kernel device driver model more
-	difficult. The features provided by cardmgr and cardctl are either
-	handled by the kernel itself now or are available in the new
-	pcmciautils package available at
-	http://kernel.org/pub/linux/utils/kernel/pcmcia/
-
-	For all architectures except ARM, the associated config symbol
-	has been removed from kernel 2.6.34; for ARM, it will be likely
-	be removed from kernel 2.6.35. The actual code will then likely
-	be removed from kernel 2.6.36.
-Who:	Dominik Brodowski <linux@dominikbrodowski.net>
+What:	Video4Linux obsolete drivers using V4L1 API
+When:	kernel 2.6.38
+Files:	drivers/staging/cpia/* drivers/staging/stradis/*
+Check:	drivers/staging/cpia/cpia.c drivers/staging/stradis/stradis.c
+Why:	There are some drivers still using V4L1 API, despite all efforts we've done
+	to migrate. Those drivers are for obsolete hardware that the old maintainer
+	didn't care (or not have the hardware anymore), and that no other developer
+	could find any hardware to buy. They probably have no practical usage today,
+	and people with such old hardware could probably keep using an older version
+	of the kernel. Those drivers will be moved to staging on 2.6.37 and, if nobody
+	care enough to port and test them with V4L2 API, they'll be removed on 2.6.38.
+Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
 
 ---------------------------
 
@@ -174,6 +166,31 @@ Who:	Eric Biederman <ebiederm@xmission.com>
 
 ---------------------------
 
+What:	/proc/<pid>/oom_adj
+When:	August 2012
+Why:	/proc/<pid>/oom_adj allows userspace to influence the oom killer's
+	badness heuristic used to determine which task to kill when the kernel
+	is out of memory.
+
+	The badness heuristic has since been rewritten since the introduction of
+	this tunable such that its meaning is deprecated.  The value was
+	implemented as a bitshift on a score generated by the badness()
+	function that did not have any precise units of measure.  With the
+	rewrite, the score is given as a proportion of available memory to the
+	task allocating pages, so using a bitshift which grows the score
+	exponentially is, thus, impossible to tune with fine granularity.
+
+	A much more powerful interface, /proc/<pid>/oom_score_adj, was
+	introduced with the oom killer rewrite that allows users to increase or
+	decrease the badness() score linearly.  This interface will replace
+	/proc/<pid>/oom_adj.
+
+	A warning will be emitted to the kernel log if an application uses this
+	deprecated interface.  After it is printed once, future warnings will be
+	suppressed until the kernel is rebooted.
+
+---------------------------
+
 What:	remove EXPORT_SYMBOL(kernel_thread)
 When:	August 2006
 Files:	arch/*/kernel/*_ksyms.c
@@ -303,15 +320,6 @@ Who:	Johannes Berg <johannes@sipsolutions.net>
 
 ---------------------------
 
-What: CONFIG_NF_CT_ACCT
-When: 2.6.29
-Why:  Accounting can now be enabled/disabled without kernel recompilation.
-      Currently used only to set a default value for a feature that is also
-      controlled by a kernel/module/sysfs/sysctl parameter.
-Who:  Krzysztof Piotr Oledzki <ole@ans.pl>
-
----------------------------
-
 What:	sysfs ui for changing p4-clockmod parameters
 When:	September 2009
 Why:	See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
@@ -367,24 +375,6 @@ When:	2.6.33
 Why:	Should be implemented in userspace, policy daemon.
 Who:	Johannes Berg <johannes@sipsolutions.net>
 
----------------------------
-
-What:	CONFIG_INOTIFY
-When:	2.6.33
-Why:	last user (audit) will be converted to the newer more generic
-	and more easily maintained fsnotify subsystem
-Who:	Eric Paris <eparis@redhat.com>
-
-----------------------------
-
-What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
-	exported interface anymore.
-When:	2.6.33
-Why:	cpu_policy_rwsem has a new cleaner definition making it local to
-	cpufreq core and contained inside cpufreq.c. Other dependent
-	drivers should not use it in order to safely avoid lockdep issues.
-Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
-
 ----------------------------
 
 What:	sound-slot/service-* module aliases and related clutters in
@@ -411,34 +401,6 @@ Who:	Tejun Heo <tj@kernel.org>
 
 ----------------------------
 
-What:	Support for VMware's guest paravirtuliazation technique [VMI] will be
-	dropped.
-When:	2.6.37 or earlier.
-Why:	With the recent innovations in CPU hardware acceleration technologies
-	from Intel and AMD, VMware ran a few experiments to compare these
-	techniques to guest paravirtualization technique on VMware's platform.
-	These hardware assisted virtualization techniques have outperformed the
-	performance benefits provided by VMI in most of the workloads. VMware
-	expects that these hardware features will be ubiquitous in a couple of
-	years, as a result, VMware has started a phased retirement of this
-	feature from the hypervisor. We will be removing this feature from the
-	Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
-	technical reasons (read opportunity to remove major chunk of pvops)
-	arise.
-
-	Please note that VMI has always been an optimization and non-VMI kernels
-	still work fine on VMware's platform.
-	Latest versions of VMware's product which support VMI are,
-	Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
-	releases for these products will continue supporting VMI.
-
-	For more details about VMI retirement take a look at this,
-	http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
-
-Who:	Alok N Kataria <akataria@vmware.com>
-
-----------------------------
-
 What:	Support for lcd_switch and display_get in asus-laptop driver
 When:	March 2010
 Why:	These two features use non-standard interfaces. There are the
@@ -459,57 +421,6 @@ Who:	Corentin Chary <corentin.chary@gmail.com>
 
 ----------------------------
 
-What:	usbvideo quickcam_messenger driver
-When:	2.6.35
-Files:	drivers/media/video/usbvideo/quickcam_messenger.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_stv06xx
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	ov511 v4l1 driver
-When:	2.6.35
-Files:	drivers/media/video/ov511.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_ov519
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	w9968cf v4l1 driver
-When:	2.6.35
-Files:	drivers/media/video/w9968cf*.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_ov519
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	ovcamchip sensor framework
-When:	2.6.35
-Files:	drivers/media/video/ovcamchip/*
-Why:	Only used by obsoleted v4l1 drivers
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	stv680 v4l1 driver
-When:	2.6.35
-Files:	drivers/media/video/stv680.[ch]
-Why:	obsolete v4l1 driver replaced by gspca_stv0680
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
-What:	zc0301 v4l driver
-When:	2.6.35
-Files:	drivers/media/video/zc0301/*
-Why:	Duplicate functionality with the gspca_zc3xx driver, zc0301 only
-	supports 2 USB-ID's (because it only supports a limited set of
-	sensors) wich are also supported by the gspca_zc3xx driver
-	(which supports 53 USB-ID's in total)
-Who:	Hans de Goede <hdegoede@redhat.com>
-
-----------------------------
-
 What:	sysfs-class-rfkill state file
 When:	Feb 2014
 Files:	net/rfkill/core.c
@@ -538,37 +449,6 @@ Who:	Jan Kiszka <jan.kiszka@web.de>
 
 ----------------------------
 
-What:	KVM memory aliases support
-When:	July 2010
-Why:	Memory aliasing support is used for speeding up guest vga access
-	through the vga windows.
-
-	Modern userspace no longer uses this feature, so it's just bitrotted
-	code and can be removed with no impact.
-Who:	Avi Kivity <avi@redhat.com>
-
-----------------------------
-
-What:	xtime, wall_to_monotonic
-When:	2.6.36+
-Files:	kernel/time/timekeeping.c include/linux/time.h
-Why:	Cleaning up timekeeping internal values. Please use
-	existing timekeeping accessor functions to access
-	the equivalent functionality.
-Who:	John Stultz <johnstul@us.ibm.com>
-
-----------------------------
-
-What:	KVM kernel-allocated memory slots
-When:	July 2010
-Why:	Since 2.6.25, kvm supports user-allocated memory slots, which are
-	much more flexible than kernel-allocated slots.  All current userspace
-	supports the newer interface and this code can be removed with no
-	impact.
-Who:	Avi Kivity <avi@redhat.com>
-
-----------------------------
-
 What:	KVM paravirt mmu host support
 When:	January 2011
 Why:	The paravirt mmu host support is slower than non-paravirt mmu, both
@@ -605,29 +485,6 @@ When:	April 2011
 Why:	Superseded by xt_CT
 Who:	Netfilter developer team <netfilter-devel@vger.kernel.org>
 
----------------------------
-
-What:	video4linux /dev/vtx teletext API support
-When:	2.6.35
-Files:	drivers/media/video/saa5246a.c drivers/media/video/saa5249.c
-	include/linux/videotext.h
-Why:	The vtx device nodes have been superseded by vbi device nodes
-	for many years. No applications exist that use the vtx support.
-	Of the two i2c drivers that actually support this API the saa5249
-	has been impossible to use for a year now and no known hardware
-	that supports this device exists. The saa5246a is theoretically
-	supported by the old mxb boards, but it never actually worked.
-
-	In summary: there is no hardware that can use this API and there
-	are no applications actually implementing this API.
-
-	The vtx support still reserves minors 192-223 and we would really
-	like to reuse those for upcoming new functionality. In the unlikely
-	event that new hardware appears that wants to use the functionality
-	provided by the vtx API, then that functionality should be build
-	around the sliced VBI API instead.
-Who:	Hans Verkuil <hverkuil@xs4all.nl>
-
 ----------------------------
 
 What:	IRQF_DISABLED
@@ -637,16 +494,6 @@ Who:	Thomas Gleixner <tglx@linutronix.de>
 
 ----------------------------
 
-What:	old ieee1394 subsystem (CONFIG_IEEE1394)
-When:	2.6.37
-Files:	drivers/ieee1394/ except init_ohci1394_dma.c
-Why:	superseded by drivers/firewire/ (CONFIG_FIREWIRE) which offers more
-	features, better performance, and better security, all with smaller
-	and more modern code base
-Who:	Stefan Richter <stefanr@s5r6.in-berlin.de>
-
-----------------------------
-
 What:	The acpi_sleep=s4_nonvs command line option
 When:	2.6.37
 Files:	arch/x86/kernel/acpi/sleep.c
@@ -654,3 +501,56 @@ Why:	superseded by acpi_sleep=nonvs
 Who:	Rafael J. Wysocki <rjw@sisk.pl>
 
 ----------------------------
+
+What: 	PCI DMA unmap state API
+When:	August 2012
+Why:	PCI DMA unmap state API (include/linux/pci-dma.h) was replaced
+	with DMA unmap state API (DMA unmap state API can be used for
+	any bus).
+Who:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+----------------------------
+
+What: 	DMA_xxBIT_MASK macros
+When:	Jun 2011
+Why:	DMA_xxBIT_MASK macros were replaced with DMA_BIT_MASK() macros.
+Who:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+----------------------------
+
+What:   namespace cgroup (ns_cgroup)
+When:   2.6.38
+Why:    The ns_cgroup leads to some problems:
+	* cgroup creation is out-of-control
+	* cgroup name can conflict when pids are looping
+	* it is not possible to have a single process handling
+	a lot of namespaces without falling in a exponential creation time
+	* we may want to create a namespace without creating a cgroup
+
+	The ns_cgroup is replaced by a compatibility flag 'clone_children',
+	where a newly created cgroup will copy the parent cgroup values.
+	The userspace has to manually create a cgroup and add a task to
+	the 'tasks' file.
+Who:    Daniel Lezcano <daniel.lezcano@free.fr>
+
+----------------------------
+
+What:	iwlwifi disable_hw_scan module parameters
+When:	2.6.40
+Why:	Hareware scan is the prefer method for iwlwifi devices for
+	scanning operation. Remove software scan support for all the
+	iwlwifi devices.
+
+Who:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
+
+----------------------------
+
+What:   access to nfsd auth cache through sys_nfsservctl or '.' files
+        in the 'nfsd' filesystem.
+When:   2.6.40
+Why:    This is a legacy interface which have been replaced by a more
+        dynamic cache.  Continuing to maintain this interface is an
+        unnecessary burden.
+Who:    NeilBrown <neilb@suse.de>
+
+----------------------------
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 4303614b5add..8c624a18f67d 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -96,8 +96,6 @@ seq_file.txt
 	- how to use the seq_file API
 sharedsubtree.txt
 	- a description of shared subtrees for namespaces.
-smbfs.txt
-	- info on using filesystems with the SMB protocol (Win 3.11 and NT).
 spufs.txt
 	- info and mount options for the SPU filesystem used on Cell.
 sysfs-pci.txt
diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.txt
index c0236e753bc8..b22abba78fed 100644
--- a/Documentation/filesystems/9p.txt
+++ b/Documentation/filesystems/9p.txt
@@ -111,7 +111,7 @@ OPTIONS
   		This can be used to share devices/named pipes/sockets between
 		hosts.  This functionality will be expanded in later versions.
 
-  access	there are three access modes.
+  access	there are four access modes.
 			user  = if a user tries to access a file on v9fs
 			        filesystem for the first time, v9fs sends an
 			        attach command (Tattach) for that user.
@@ -120,6 +120,8 @@ OPTIONS
 				the files on the mounted filesystem
 			any   = v9fs does single attach and performs all
 				operations as one user
+			client = ACL based access check on the 9p client
+			         side for access validation
 
   cachetag	cache tag to use the specified persistent cache.
 		cache tags for existing cache sessions can be listed at
@@ -128,7 +130,7 @@ OPTIONS
 RESOURCES
 =========
 
-Our current recommendation is to use Inferno (http://www.vitanuova.com/inferno)
+Our current recommendation is to use Inferno (http://www.vitanuova.com/nferno/index.html)
 as the 9p server.  You can start a 9p server under Inferno by issuing the
 following command:
    ; styxlisten -A tcp!*!564 export '#U*'
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 96d4293607ec..a91f30890011 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -92,8 +92,8 @@ prototypes:
 	void (*destroy_inode)(struct inode *);
 	void (*dirty_inode) (struct inode *);
 	int (*write_inode) (struct inode *, int);
-	void (*drop_inode) (struct inode *);
-	void (*delete_inode) (struct inode *);
+	int (*drop_inode) (struct inode *);
+	void (*evict_inode) (struct inode *);
 	void (*put_super) (struct super_block *);
 	void (*write_super) (struct super_block *);
 	int (*sync_fs)(struct super_block *sb, int wait);
@@ -101,14 +101,13 @@ prototypes:
 	int (*unfreeze_fs) (struct super_block *);
 	int (*statfs) (struct dentry *, struct kstatfs *);
 	int (*remount_fs) (struct super_block *, int *, char *);
-	void (*clear_inode) (struct inode *);
 	void (*umount_begin) (struct super_block *);
 	int (*show_options)(struct seq_file *, struct vfsmount *);
 	ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
 	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
 
 locking rules:
-	All may block.
+	All may block [not true, see below]
 	None have BKL
 			s_umount
 alloc_inode:
@@ -116,22 +115,25 @@ destroy_inode:
 dirty_inode:				(must not sleep)
 write_inode:
 drop_inode:				!!!inode_lock!!!
-delete_inode:
+evict_inode:
 put_super:		write
 write_super:		read
 sync_fs:		read
 freeze_fs:		read
 unfreeze_fs:		read
-statfs:			no
-remount_fs:		maybe		(see below)
-clear_inode:
+statfs:			maybe(read)	(see below)
+remount_fs:		write
 umount_begin:		no
 show_options:		no		(namespace_sem)
 quota_read:		no		(see below)
 quota_write:		no		(see below)
 
-->remount_fs() will have the s_umount exclusive lock if it's already mounted.
-When called from get_sb_single, it does NOT have the s_umount lock.
+->statfs() has s_umount (shared) when called by ustat(2) (native or
+compat), but that's an accident of bad API; s_umount is used to pin
+the superblock down when we only have dev_t given us by userland to
+identify the superblock.  Everything else (statfs(), fstatfs(), etc.)
+doesn't hold it when calling ->statfs() - superblock is pinned down
+by resolving the pathname passed to syscall.
 ->quota_read() and ->quota_write() functions are both guaranteed to
 be the only ones operating on the quota file by the quota code (via
 dqio_sem) (unless an admin really wants to screw up something and
@@ -320,7 +322,6 @@ fl_release_private:	yes	yes
 prototypes:
 	int (*fl_compare_owner)(struct file_lock *, struct file_lock *);
 	void (*fl_notify)(struct file_lock *);  /* unblock callback */
-	void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
 	void (*fl_release_private)(struct file_lock *);
 	void (*fl_break)(struct file_lock *); /* break_lease callback */
 
@@ -328,7 +329,6 @@ locking rules:
 			BKL	may block
 fl_compare_owner:	yes	no
 fl_notify:		yes	no
-fl_copy_lock:		yes	no
 fl_release_private:	yes	yes
 fl_break:		yes	no
 
@@ -347,21 +347,36 @@ call this method upon the IO completion.
 
 --------------------------- block_device_operations -----------------------
 prototypes:
-	int (*open) (struct inode *, struct file *);
-	int (*release) (struct inode *, struct file *);
-	int (*ioctl) (struct inode *, struct file *, unsigned, unsigned long);
+	int (*open) (struct block_device *, fmode_t);
+	int (*release) (struct gendisk *, fmode_t);
+	int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
+	int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long);
+	int (*direct_access) (struct block_device *, sector_t, void **, unsigned long *);
 	int (*media_changed) (struct gendisk *);
+	void (*unlock_native_capacity) (struct gendisk *);
 	int (*revalidate_disk) (struct gendisk *);
+	int (*getgeo)(struct block_device *, struct hd_geometry *);
+	void (*swap_slot_free_notify) (struct block_device *, unsigned long);
 
 locking rules:
-			BKL	bd_sem
-open:			yes	yes
-release:		yes	yes
-ioctl:			yes	no
+			BKL	bd_mutex
+open:			no	yes
+release:		no	yes
+ioctl:			no	no
+compat_ioctl:		no	no
+direct_access:		no	no
 media_changed:		no	no
+unlock_native_capacity:	no	no
 revalidate_disk:	no	no
+getgeo:			no	no
+swap_slot_free_notify:	no	no	(see below)
+
+media_changed, unlock_native_capacity and revalidate_disk are called only from
+check_disk_change().
+
+swap_slot_free_notify is called with swap_lock and sometimes the page lock
+held.
 
-The last two are called only from check_disk_change().
 
 --------------------------- file_operations -------------------------------
 prototypes:
@@ -372,8 +387,6 @@ prototypes:
 	ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
 	int (*readdir) (struct file *, void *, filldir_t);
 	unsigned int (*poll) (struct file *, struct poll_table_struct *);
-	int (*ioctl) (struct inode *, struct file *, unsigned int,
-			unsigned long);
 	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
 	long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
@@ -407,8 +420,7 @@ write:			no
 aio_write:		no
 readdir: 		no
 poll:			no
-ioctl:			yes	(see below)
-unlocked_ioctl:		no	(see below)
+unlocked_ioctl:		no
 compat_ioctl:		no
 mmap:			no
 open:			no
@@ -451,9 +463,6 @@ move ->readdir() to inode_operations and use a separate method for directory
 anything that resembles union-mount we won't have a struct file for all
 components. And there are other reasons why the current interface is a mess...
 
-->ioctl() on regular files is superceded by the ->unlocked_ioctl() that
-doesn't take the BKL.
-
 ->read on directories probably must go away - we should just enforce -EISDIR
 in sys_read() and friends.
 
diff --git a/Documentation/filesystems/affs.txt b/Documentation/filesystems/affs.txt
index 2d1524469c25..81ac488e3758 100644
--- a/Documentation/filesystems/affs.txt
+++ b/Documentation/filesystems/affs.txt
@@ -216,4 +216,4 @@ due to an incompatibility with the Amiga floppy controller.
 
 If you are interested in an Amiga Emulator for Linux, look at
 
-http://www.freiburg.linux.de/~uae/
+http://web.archive.org/web/*/http://www.freiburg.linux.de/~uae/
diff --git a/Documentation/filesystems/befs.txt b/Documentation/filesystems/befs.txt
index 67391a15949a..6e49c363938e 100644
--- a/Documentation/filesystems/befs.txt
+++ b/Documentation/filesystems/befs.txt
@@ -31,7 +31,7 @@ Current maintainer: Sergey S. Kostyliov <rathamahata@php4.ru>
 
 WHAT IS THIS DRIVER?
 ==================
-This module implements the native filesystem of BeOS <http://www.be.com/>
+This module implements the native filesystem of BeOS http://www.beincorporated.com/ 
 for the linux 2.4.1 and later kernels. Currently it is a read-only
 implementation.
 
@@ -61,7 +61,7 @@ step 2.  Configuration & make kernel
 
 The linux kernel has many compile-time options. Most of them are beyond the
 scope of this document. I suggest the Kernel-HOWTO document as a good general
-reference on this topic. <http://www.linux.com/howto/Kernel-HOWTO.html>
+reference on this topic. http://www.linuxdocs.org/HOWTOs/Kernel-HOWTO-4.html 
 
 However, to use the BeFS module, you must enable it at configure time.
 
diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt
index a91e2e2095b0..770267af5b3e 100644
--- a/Documentation/filesystems/caching/fscache.txt
+++ b/Documentation/filesystems/caching/fscache.txt
@@ -343,8 +343,8 @@ This will look something like:
 	[root@andromeda ~]# head /proc/fs/fscache/objects
 	OBJECT   PARENT   STAT CHLDN OPS OOP IPR EX READS EM EV F S | NETFS_COOKIE_DEF TY FL NETFS_DATA       OBJECT_KEY, AUX_DATA
 	======== ======== ==== ===== === === === == ===== == == = = | ================ == == ================ ================
-	   17e4b        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a
-	   1693a        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a
+	   17e4b        2 ACTV     0   0   0   0  0     0 7b  4 0 0 | NFS.fh           DT  0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a
+	   1693a        2 ACTV     0   0   0   0  0     0 7b  4 0 0 | NFS.fh           DT  0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a
 
 where the first set of columns before the '|' describe the object:
 
@@ -362,7 +362,7 @@ where the first set of columns before the '|' describe the object:
 	EM	Object's event mask
 	EV	Events raised on this object
 	F	Object flags
-	S	Object slow-work work item flags
+	S	Object work item busy state mask (1:pending 2:running)
 
 and the second set of columns describe the object's cookie, if present:
 
@@ -395,8 +395,8 @@ and the following paired letters:
 	w	Show objects that don't have pending writes
 	R	Show objects that have outstanding reads
 	r	Show objects that don't have outstanding reads
-	S	Show objects that have slow work queued
-	s	Show objects that don't have slow work queued
+	S	Show objects that have work queued
+	s	Show objects that don't have work queued
 
 If neither side of a letter pair is given, then both are implied.  For example:
 
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index e1def1786e50..6ab9442d7eeb 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -353,6 +353,20 @@ noauto_da_alloc		replacing existing files via patterns such as
 			system crashes before the delayed allocation
 			blocks are forced to disk.
 
+noinit_itable		Do not initialize any uninitialized inode table
+			blocks in the background.  This feature may be
+			used by installation CD's so that the install
+			process can complete as quickly as possible; the
+			inode table initialization process would then be
+			deferred until the next time the  file system
+			is unmounted.
+
+init_itable=n		The lazy itable init code will wait n times the
+			number of milliseconds it took to zero out the
+			previous block group's inode table.  This
+			minimizes the impact on the systme performance
+			while file system's inode table is being initialized.
+
 discard		Controls whether ext4 should issue discard/TRIM
 nodiscard(*)		commands to the underlying block device when
 			blocks are freed.  This is useful for SSD devices
diff --git a/Documentation/filesystems/isofs.txt b/Documentation/filesystems/isofs.txt
index 3c367c3b3608..ba0a93384de0 100644
--- a/Documentation/filesystems/isofs.txt
+++ b/Documentation/filesystems/isofs.txt
@@ -41,7 +41,7 @@ Mount options unique to the isofs filesystem.
   sbsector=xxx  Session begins from sector xxx
 
 Recommended documents about ISO 9660 standard are located at:
-http://www.y-adagio.com/public/standards/iso_cdromr/tocont.htm
+http://www.y-adagio.com/
 ftp://ftp.ecma.ch/ecma-st/Ecma-119.pdf
 Quoting from the PDF "This 2nd Edition of Standard ECMA-119 is technically 
 identical with ISO 9660.", so it is a valid and gratis substitute of the
diff --git a/Documentation/filesystems/nfs/00-INDEX b/Documentation/filesystems/nfs/00-INDEX
index 2f68cd688769..a57e12411d2a 100644
--- a/Documentation/filesystems/nfs/00-INDEX
+++ b/Documentation/filesystems/nfs/00-INDEX
@@ -12,5 +12,9 @@ nfs-rdma.txt
 	- how to install and setup the Linux NFS/RDMA client and server software
 nfsroot.txt
 	- short guide on setting up a diskless box with NFS root filesystem.
+pnfs.txt
+	- short explanation of some of the internals of the pnfs client code
 rpc-cache.txt
 	- introduction to the caching mechanisms in the sunrpc layer.
+idmapper.txt
+	- information for configuring request-keys to be used by idmapper
diff --git a/Documentation/filesystems/nfs/idmapper.txt b/Documentation/filesystems/nfs/idmapper.txt
new file mode 100644
index 000000000000..b9b4192ea8b5
--- /dev/null
+++ b/Documentation/filesystems/nfs/idmapper.txt
@@ -0,0 +1,67 @@
+
+=========
+ID Mapper
+=========
+Id mapper is used by NFS to translate user and group ids into names, and to
+translate user and group names into ids.  Part of this translation involves
+performing an upcall to userspace to request the information.  Id mapper will
+user request-key to perform this upcall and cache the result.  The program
+/usr/sbin/nfs.idmap should be called by request-key, and will perform the
+translation and initialize a key with the resulting information.
+
+ NFS_USE_NEW_IDMAPPER must be selected when configuring the kernel to use this
+ feature.
+
+===========
+Configuring
+===========
+The file /etc/request-key.conf will need to be modified so /sbin/request-key can
+direct the upcall.  The following line should be added:
+
+#OP	TYPE	DESCRIPTION	CALLOUT INFO	PROGRAM ARG1 ARG2 ARG3 ...
+#======	=======	===============	===============	===============================
+create	id_resolver	*	*		/usr/sbin/nfs.idmap %k %d 600
+
+This will direct all id_resolver requests to the program /usr/sbin/nfs.idmap.
+The last parameter, 600, defines how many seconds into the future the key will
+expire.  This parameter is optional for /usr/sbin/nfs.idmap.  When the timeout
+is not specified, nfs.idmap will default to 600 seconds.
+
+id mapper uses for key descriptions:
+	  uid:  Find the UID for the given user
+	  gid:  Find the GID for the given group
+	 user:  Find the user  name for the given UID
+	group:  Find the group name for the given GID
+
+You can handle any of these individually, rather than using the generic upcall
+program.  If you would like to use your own program for a uid lookup then you
+would edit your request-key.conf so it look similar to this:
+
+#OP	TYPE	DESCRIPTION	CALLOUT INFO	PROGRAM ARG1 ARG2 ARG3 ...
+#======	=======	===============	===============	===============================
+create	id_resolver	uid:*	*		/some/other/program %k %d 600
+create	id_resolver	*	*		/usr/sbin/nfs.idmap %k %d 600
+
+Notice that the new line was added above the line for the generic program.
+request-key will find the first matching line and corresponding program.  In
+this case, /some/other/program will handle all uid lookups and
+/usr/sbin/nfs.idmap will handle gid, user, and group lookups.
+
+See <file:Documentation/keys-request-keys.txt> for more information about the
+request-key function.
+
+
+=========
+nfs.idmap
+=========
+nfs.idmap is designed to be called by request-key, and should not be run "by
+hand".  This program takes two arguments, a serialized key and a key
+description.  The serialized key is first converted into a key_serial_t, and
+then passed as an argument to keyctl_instantiate (both are part of keyutils.h).
+
+The actual lookups are performed by functions found in nfsidmap.h.  nfs.idmap
+determines the correct function to call by looking at the first part of the
+description string.  For example, a uid lookup description will appear as
+"uid:user@domain".
+
+nfs.idmap will return 0 if the key was instantiated, and non-zero otherwise.
diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt
index 3ba0b945aaf8..90c71c6f0d00 100644
--- a/Documentation/filesystems/nfs/nfsroot.txt
+++ b/Documentation/filesystems/nfs/nfsroot.txt
@@ -124,6 +124,8 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
 
   <hostname>	Name of the client. May be supplied by autoconfiguration,
   		but its absence will not trigger autoconfiguration.
+		If specified and DHCP is used, the user provided hostname will
+		be carried in the DHCP request to hopefully update DNS record.
 
   		Default: Client IP address is used in ASCII notation.
 
@@ -157,6 +159,28 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
                 Default: any
 
 
+nfsrootdebug
+
+  This parameter enables debugging messages to appear in the kernel
+  log at boot time so that administrators can verify that the correct
+  NFS mount options, server address, and root path are passed to the
+  NFS client.
+
+
+rdinit=<executable file>
+
+  To specify which file contains the program that starts system
+  initialization, administrators can use this command line parameter.
+  The default value of this parameter is "/init".  If the specified
+  file exists and the kernel can execute it, root filesystem related
+  kernel command line parameters, including `nfsroot=', are ignored.
+
+  A description of the process of mounting the root file system can be
+  found in:
+
+    Documentation/early-userspace/README
+
+
 
 
 3.) Boot Loader
diff --git a/Documentation/filesystems/nfs/pnfs.txt b/Documentation/filesystems/nfs/pnfs.txt
new file mode 100644
index 000000000000..bc0b9cfe095b
--- /dev/null
+++ b/Documentation/filesystems/nfs/pnfs.txt
@@ -0,0 +1,48 @@
+Reference counting in pnfs:
+==========================
+
+The are several inter-related caches.  We have layouts which can
+reference multiple devices, each of which can reference multiple data servers.
+Each data server can be referenced by multiple devices.  Each device
+can be referenced by multiple layouts.  To keep all of this straight,
+we need to reference count.
+
+
+struct pnfs_layout_hdr
+----------------------
+The on-the-wire command LAYOUTGET corresponds to struct
+pnfs_layout_segment, usually referred to by the variable name lseg.
+Each nfs_inode may hold a pointer to a cache of of these layout
+segments in nfsi->layout, of type struct pnfs_layout_hdr.
+
+We reference the header for the inode pointing to it, across each
+outstanding RPC call that references it (LAYOUTGET, LAYOUTRETURN,
+LAYOUTCOMMIT), and for each lseg held within.
+
+Each header is also (when non-empty) put on a list associated with
+struct nfs_client (cl_layouts).  Being put on this list does not bump
+the reference count, as the layout is kept around by the lseg that
+keeps it in the list.
+
+deviceid_cache
+--------------
+lsegs reference device ids, which are resolved per nfs_client and
+layout driver type.  The device ids are held in a RCU cache (struct
+nfs4_deviceid_cache).  The cache itself is referenced across each
+mount.  The entries (struct nfs4_deviceid) themselves are held across
+the lifetime of each lseg referencing them.
+
+RCU is used because the deviceid is basically a write once, read many
+data structure.  The hlist size of 32 buckets needs better
+justification, but seems reasonable given that we can have multiple
+deviceid's per filesystem, and multiple filesystems per nfs_client.
+
+The hash code is copied from the nfsd code base.  A discussion of
+hashing and variations of this algorithm can be found at:
+http://groups.google.com/group/comp.lang.c/browse_thread/thread/9522965e2b8d3809
+
+data server cache
+-----------------
+file driver devices refer to data servers, which are kept in a module
+level cache.  Its reference is held over the lifetime of the deviceid
+pointing to it.
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt
index d3e7673995eb..d5c0cef38a71 100644
--- a/Documentation/filesystems/nilfs2.txt
+++ b/Documentation/filesystems/nilfs2.txt
@@ -49,7 +49,10 @@ Mount options
 NILFS2 supports the following mount options:
 (*) == default
 
-nobarrier		Disables barriers.
+barrier(*)		This enables/disables the use of write barriers.  This
+nobarrier		requires an IO stack which can support barriers, and
+			if nilfs gets an error on a barrier write, it will
+			disable again with a warning.
 errors=continue		Keep going on a filesystem error.
 errors=remount-ro(*)	Remount the filesystem read-only on an error.
 errors=panic		Panic and halt the machine if an error occurs.
@@ -74,9 +77,10 @@ norecovery		Disable recovery of the filesystem on mount.
 			This disables every write access on the device for
 			read-only mounts or snapshots.  This option will fail
 			for r/w mounts on an unclean volume.
-discard			Issue discard/TRIM commands to the underlying block
-			device when blocks are freed.  This is useful for SSD
-			devices and sparse/thinly-provisioned LUNs.
+discard			This enables/disables the use of discard/TRIM commands.
+nodiscard(*)		The discard/TRIM commands are sent to the underlying
+			block device when blocks are freed.  This is useful
+			for SSD devices and sparse/thinly-provisioned LUNs.
 
 NILFS2 usage
 ============
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index 1f7ae144f6d8..5393e6611691 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -87,3 +87,10 @@ dir_resv_level=	(*)	By default, directory reservations will scale with file
 			reservations - users should rarely need to change this
 			value. If allocation reservations are turned off, this
 			option will have no effect.
+coherency=full  (*)	Disallow concurrent O_DIRECT writes, cluster inode
+			lock will be taken to force other nodes drop cache,
+			therefore full cluster coherency is guaranteed even
+			for O_DIRECT writes.
+coherency=buffered	Allow concurrent O_DIRECT writes without EX lock among
+			nodes, which gains high performance at risk of getting
+			stale data on other nodes.
diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
index a7e9746ee7ea..b12c89538680 100644
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@@ -273,3 +273,48 @@ it's safe to remove it.  If you don't need it, remove it.
 deliberate; as soon as struct block_device * is propagated in a reasonable
 way by that code fixing will become trivial; until then nothing can be
 done.
+
+[mandatory]
+
+	block truncatation on error exit from ->write_begin, and ->direct_IO
+moved from generic methods (block_write_begin, cont_write_begin,
+nobh_write_begin, blockdev_direct_IO*) to callers.  Take a look at
+ext2_write_failed and callers for an example.
+
+[mandatory]
+
+	->truncate is going away.  The whole truncate sequence needs to be
+implemented in ->setattr, which is now mandatory for filesystems
+implementing on-disk size changes.  Start with a copy of the old inode_setattr
+and vmtruncate, and the reorder the vmtruncate + foofs_vmtruncate sequence to
+be in order of zeroing blocks using block_truncate_page or similar helpers,
+size update and on finally on-disk truncation which should not fail.
+inode_change_ok now includes the size checks for ATTR_SIZE and must be called
+in the beginning of ->setattr unconditionally.
+
+[mandatory]
+
+	->clear_inode() and ->delete_inode() are gone; ->evict_inode() should
+be used instead.  It gets called whenever the inode is evicted, whether it has
+remaining links or not.  Caller does *not* evict the pagecache or inode-associated
+metadata buffers; getting rid of those is responsibility of method, as it had
+been for ->delete_inode().
+	->drop_inode() returns int now; it's called on final iput() with inode_lock
+held and it returns true if filesystems wants the inode to be dropped.  As before,
+generic_drop_inode() is still the default and it's been updated appropriately.
+generic_delete_inode() is also alive and it consists simply of return 1.  Note that
+all actual eviction work is done by caller after ->drop_inode() returns.
+	clear_inode() is gone; use end_writeback() instead.  As before, it must
+be called exactly once on each call of ->evict_inode() (as it used to be for
+each call of ->delete_inode()).  Unlike before, if you are using inode-associated
+metadata buffers (i.e. mark_buffer_dirty_inode()), it's your responsibility to
+call invalidate_inode_buffers() before end_writeback().
+	No async writeback (and thus no calls of ->write_inode()) will happen
+after end_writeback() returns, so actions that should not overlap with ->write_inode()
+(e.g. freeing on-disk inode if i_nlink is 0) ought to be done after that call.
+
+	NOTE: checking i_nlink in the beginning of ->write_inode() and bailing out
+if it's zero is not *and* *never* *had* *been* enough.  Final unlink() and iput()
+may happen while the inode is in the middle of ->write_inode(); e.g. if you blindly
+free the on-disk inode, you may end up doing that while ->write_inode() is writing
+to it.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 9fb6cbe70bde..e73df2722ff3 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -33,7 +33,8 @@ Table of Contents
   2	Modifying System Parameters
 
   3	Per-Process Parameters
-  3.1	/proc/<pid>/oom_adj - Adjust the oom-killer score
+  3.1	/proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
+								score
   3.2	/proc/<pid>/oom_score - Display current oom-killer score
   3.3	/proc/<pid>/io - Display the IO accounting fields
   3.4	/proc/<pid>/coredump_filter - Core dump filtering settings
@@ -73,9 +74,9 @@ contact Bodo  Bauer  at  bb@ricochet.net.  We'll  be happy to add them to this
 document.
 
 The   latest   version    of   this   document   is    available   online   at
-http://skaro.nightcrawler.com/~bb/Docs/Proc as HTML version.
+http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/proc.html
 
-If  the above  direction does  not works  for you,  ypu could  try the  kernel
+If  the above  direction does  not works  for you,  you could  try the  kernel
 mailing  list  at  linux-kernel@vger.kernel.org  and/or try  to  reach  me  at
 comandante@zaralinux.com.
 
@@ -135,6 +136,7 @@ Table 1-1: Process specific entries in /proc
  statm		Process memory status information
  status		Process status in human readable form
  wchan		If CONFIG_KALLSYMS is set, a pre-decoded wchan
+ pagemap	Page table
  stack		Report full stack trace, enable via CONFIG_STACKTRACE
  smaps		a extension based on maps, showing the memory consumption of
 		each mapping
@@ -369,17 +371,24 @@ Shared_Dirty:          0 kB
 Private_Clean:         0 kB
 Private_Dirty:         0 kB
 Referenced:          892 kB
+Anonymous:             0 kB
 Swap:                  0 kB
 KernelPageSize:        4 kB
 MMUPageSize:           4 kB
 
-The first  of these lines shows  the same information  as is displayed for the
-mapping in /proc/PID/maps.  The remaining lines show  the size of the mapping,
-the amount of the mapping that is currently resident in RAM, the "proportional
-set size” (divide each shared page by the number of processes sharing it), the
-number of clean and dirty shared pages in the mapping, and the number of clean
-and dirty private pages in the mapping.  The "Referenced" indicates the amount
-of memory currently marked as referenced or accessed.
+The first of these lines shows the same information as is displayed for the
+mapping in /proc/PID/maps.  The remaining lines show the size of the mapping
+(size), the amount of the mapping that is currently resident in RAM (RSS), the
+process' proportional share of this mapping (PSS), the number of clean and
+dirty private pages in the mapping.  Note that even a page which is part of a
+MAP_SHARED mapping, but has only a single pte mapped, i.e.  is currently used
+by only one process, is accounted as private and not as shared.  "Referenced"
+indicates the amount of memory currently marked as referenced or accessed.
+"Anonymous" shows the amount of memory that does not belong to any file.  Even
+a mapping associated with a file may contain anonymous pages: when MAP_PRIVATE
+and a page is modified, the file page is replaced by a private anonymous copy.
+"Swap" shows how much would-be-anonymous memory is also used, but out on
+swap.
 
 This file is only present if the CONFIG_MMU kernel configuration option is
 enabled.
@@ -396,6 +405,9 @@ To clear the bits for the file mapped pages associated with the process
     > echo 3 > /proc/PID/clear_refs
 Any other value written to /proc/PID/clear_refs will have no effect.
 
+The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags
+using /proc/kpageflags and number of times a page is mapped using
+/proc/kpagecount. For detailed explanation, see Documentation/vm/pagemap.txt.
 
 1.2 Kernel data
 ---------------
@@ -1234,42 +1246,64 @@ of the kernel.
 CHAPTER 3: PER-PROCESS PARAMETERS
 ------------------------------------------------------------------------------
 
-3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
-------------------------------------------------------
-
-This file can be used to adjust the score used to select which processes
-should be killed in an  out-of-memory  situation.  Giving it a high score will
-increase the likelihood of this process being killed by the oom-killer.  Valid
-values are in the range -16 to +15, plus the special value -17, which disables
-oom-killing altogether for this process.
-
-The process to be killed in an out-of-memory situation is selected among all others
-based on its badness score. This value equals the original memory size of the process
-and is then updated according to its CPU time (utime + stime) and the
-run time (uptime - start time). The longer it runs the smaller is the score.
-Badness score is divided by the square root of the CPU time and then by
-the double square root of the run time.
-
-Swapped out tasks are killed first. Half of each child's memory size is added to
-the parent's score if they do not share the same memory. Thus forking servers
-are the prime candidates to be killed. Having only one 'hungry' child will make
-parent less preferable than the child.
-
-/proc/<pid>/oom_score shows process' current badness score.
-
-The following heuristics are then applied:
- * if the task was reniced, its score doubles
- * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE
- 	or CAP_SYS_RAWIO) have their score divided by 4
- * if oom condition happened in one cpuset and checked process does not belong
- 	to it, its score is divided by 8
- * the resulting score is multiplied by two to the power of oom_adj, i.e.
-	points <<= oom_adj when it is positive and
-	points >>= -(oom_adj) otherwise
-
-The task with the highest badness score is then selected and its children
-are killed, process itself will be killed in an OOM situation when it does
-not have children or some of them disabled oom like described above.
+3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+--------------------------------------------------------------------------------
+
+These file can be used to adjust the badness heuristic used to select which
+process gets killed in out of memory conditions.
+
+The badness heuristic assigns a value to each candidate task ranging from 0
+(never kill) to 1000 (always kill) to determine which process is targeted.  The
+units are roughly a proportion along that range of allowed memory the process
+may allocate from based on an estimation of its current memory and swap use.
+For example, if a task is using all allowed memory, its badness score will be
+1000.  If it is using half of its allowed memory, its score will be 500.
+
+There is an additional factor included in the badness score: root
+processes are given 3% extra memory over other tasks.
+
+The amount of "allowed" memory depends on the context in which the oom killer
+was called.  If it is due to the memory assigned to the allocating task's cpuset
+being exhausted, the allowed memory represents the set of mems assigned to that
+cpuset.  If it is due to a mempolicy's node(s) being exhausted, the allowed
+memory represents the set of mempolicy nodes.  If it is due to a memory
+limit (or swap limit) being reached, the allowed memory is that configured
+limit.  Finally, if it is due to the entire system being out of memory, the
+allowed memory represents all allocatable resources.
+
+The value of /proc/<pid>/oom_score_adj is added to the badness score before it
+is used to determine which task to kill.  Acceptable values range from -1000
+(OOM_SCORE_ADJ_MIN) to +1000 (OOM_SCORE_ADJ_MAX).  This allows userspace to
+polarize the preference for oom killing either by always preferring a certain
+task or completely disabling it.  The lowest possible value, -1000, is
+equivalent to disabling oom killing entirely for that task since it will always
+report a badness score of 0.
+
+Consequently, it is very simple for userspace to define the amount of memory to
+consider for each task.  Setting a /proc/<pid>/oom_score_adj value of +500, for
+example, is roughly equivalent to allowing the remainder of tasks sharing the
+same system, cpuset, mempolicy, or memory controller resources to use at least
+50% more memory.  A value of -500, on the other hand, would be roughly
+equivalent to discounting 50% of the task's allowed memory from being considered
+as scoring against the task.
+
+For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
+be used to tune the badness score.  Its acceptable values range from -16
+(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
+(OOM_DISABLE) to disable oom killing entirely for that task.  Its value is
+scaled linearly with /proc/<pid>/oom_score_adj.
+
+Writing to /proc/<pid>/oom_score_adj or /proc/<pid>/oom_adj will change the
+other with its scaled value.
+
+NOTICE: /proc/<pid>/oom_adj is deprecated and will be removed, please see
+Documentation/feature-removal-schedule.txt.
+
+Caveat: when a parent task is selected, the oom killer will sacrifice any first
+generation children with seperate address spaces instead, if possible.  This
+avoids servers and important system daemons from being killed and loses the
+minimal amount of work.
+
 
 3.2 /proc/<pid>/oom_score - Display current oom-killer score
 -------------------------------------------------------------
diff --git a/Documentation/filesystems/sharedsubtree.txt b/Documentation/filesystems/sharedsubtree.txt
index fc0e39af43c3..4ede421c9687 100644
--- a/Documentation/filesystems/sharedsubtree.txt
+++ b/Documentation/filesystems/sharedsubtree.txt
@@ -62,10 +62,10 @@ replicas continue to be exactly same.
 	# mount /dev/sd0  /tmp/a
 
 	#ls /tmp/a
-	t1 t2 t2
+	t1 t2 t3
 
 	#ls /mnt/a
-	t1 t2 t2
+	t1 t2 t3
 
 	Note that the mount has propagated to the mount at /mnt as well.
 
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt
index 203f7202cc9e..66699afd66ca 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@@ -2,7 +2,7 @@ SQUASHFS 4.0 FILESYSTEM
 =======================
 
 Squashfs is a compressed read-only filesystem for Linux.
-It uses zlib compression to compress files, inodes and directories.
+It uses zlib/lzo compression to compress files, inodes and directories.
 Inodes in the system are very small and all blocks are packed to minimise
 data overhead. Block sizes greater than 4K are supported up to a maximum
 of 1Mbytes (default block size 128K).
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 85354b32d731..74eaac26f8b8 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -39,7 +39,7 @@ files, each with their own function.
        local_cpus	   nearby CPU mask (cpumask, ro)
        remove		   remove device from kernel's list (ascii, wo)
        resource		   PCI resource host addresses (ascii, ro)
-       resource0..N	   PCI resource N, if present (binary, mmap)
+       resource0..N	   PCI resource N, if present (binary, mmap, rw[1])
        resource0_wc..N_wc  PCI WC map resource N, if prefetchable (binary, mmap)
        rom		   PCI ROM resource, if present (binary, ro)
        subsystem_device	   PCI subsystem device (ascii, ro)
@@ -54,13 +54,16 @@ files, each with their own function.
   binary - file contains binary data
   cpumask - file contains a cpumask type
 
+[1] rw for RESOURCE_IO (I/O port) regions only
+
 The read only files are informational, writes to them will be ignored, with
 the exception of the 'rom' file.  Writable files can be used to perform
 actions on the device (e.g. changing config space, detaching a device).
 mmapable files are available via an mmap of the file at offset 0 and can be
 used to do actual device programming from userspace.  Note that some platforms
 don't support mmapping of certain resources, so be sure to check the return
-value from any attempted mmap.
+value from any attempted mmap.  The most notable of these are I/O port
+resources, which also provide read/write access.
 
 The 'enable' file provides a counter that indicates how many times the device 
 has been enabled.  If the 'enable' file currently returns '4', and a '1' is
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 931c806642c5..5d1335faec2d 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -4,7 +4,7 @@ sysfs - _The_ filesystem for exporting kernel objects.
 Patrick Mochel	<mochel@osdl.org>
 Mike Murphy <mamurph@cs.clemson.edu>
 
-Revised:    22 February 2009
+Revised:    15 July 2010
 Original:   10 January 2003
 
 
@@ -124,7 +124,7 @@ show and store methods of the attribute owners.
 
 struct sysfs_ops {
         ssize_t (*show)(struct kobject *, struct attribute *, char *);
-        ssize_t (*store)(struct kobject *, struct attribute *, const char *);
+        ssize_t (*store)(struct kobject *, struct attribute *, const char *, size_t);
 };
 
 [ Subsystems should have already defined a struct kobj_type as a
@@ -139,18 +139,22 @@ calls the associated methods.
 
 To illustrate:
 
+#define to_dev(obj) container_of(obj, struct device, kobj)
 #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
-#define to_dev(d) container_of(d, struct device, kobj)
 
-static ssize_t
-dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf)
+static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
+                             char *buf)
 {
-        struct device_attribute * dev_attr = to_dev_attr(attr);
-        struct device * dev = to_dev(kobj);
-        ssize_t ret = 0;
+        struct device_attribute *dev_attr = to_dev_attr(attr);
+        struct device *dev = to_dev(kobj);
+        ssize_t ret = -EIO;
 
         if (dev_attr->show)
-                ret = dev_attr->show(dev, buf);
+                ret = dev_attr->show(dev, dev_attr, buf);
+        if (ret >= (ssize_t)PAGE_SIZE) {
+                print_symbol("dev_attr_show: %s returned bad count\n",
+                                (unsigned long)dev_attr->show);
+        }
         return ret;
 }
 
@@ -163,10 +167,9 @@ To read or write attributes, show() or store() methods must be
 specified when declaring the attribute. The method types should be as
 simple as those defined for device attributes:
 
-ssize_t (*show)(struct device * dev, struct device_attribute * attr,
-                char * buf);
-ssize_t (*store)(struct device * dev, struct device_attribute * attr,
-                 const char * buf);
+ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf);
+ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+                 const char *buf, size_t count);
 
 IOW, they should take only an object, an attribute, and a buffer as parameters.
 
@@ -209,8 +212,8 @@ Other notes:
 
 - show() should always use snprintf(). 
 
-- store() should return the number of bytes used from the buffer. This
-  can be done using strlen().
+- store() should return the number of bytes used from the buffer. If the
+  entire buffer has been used, just return the count argument.
 
 - show() or store() can always return errors. If a bad value comes
   through, be sure to return an error.
@@ -223,15 +226,18 @@ Other notes:
 
 A very simple (and naive) implementation of a device attribute is:
 
-static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_name(struct device *dev, struct device_attribute *attr,
+                         char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%s\n", dev->name);
 }
 
-static ssize_t store_name(struct device * dev, const char * buf)
+static ssize_t store_name(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
 {
-	sscanf(buf, "%20s", dev->name);
-	return strnlen(buf, PAGE_SIZE);
+        snprintf(dev->name, sizeof(dev->name), "%.*s",
+                 (int)min(count, sizeof(dev->name) - 1), buf);
+	return count;
 }
 
 static DEVICE_ATTR(name, S_IRUGO, show_name, store_name);
@@ -327,7 +333,7 @@ Structure:
 struct bus_attribute {
         struct attribute        attr;
         ssize_t (*show)(struct bus_type *, char * buf);
-        ssize_t (*store)(struct bus_type *, const char * buf);
+        ssize_t (*store)(struct bus_type *, const char * buf, size_t count);
 };
 
 Declaring:
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index eed520fd0c8e..ead764b2728f 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -165,7 +165,8 @@ TEST SUITE
 If you plan to make any modifications to the vfat filesystem, please
 get the test suite that comes with the vfat distribution at
 
-  http://bmrc.berkeley.edu/people/chaffee/vfat.html
+  http://web.archive.org/web/*/http://bmrc.berkeley.edu/
+  people/chaffee/vfat.html
 
 This tests quite a few parts of the vfat filesystem and additional
 tests for new features or untested features would be appreciated.
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 94677e7dcb13..ed7e5efc06d8 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -727,7 +727,6 @@ struct file_operations {
 	ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
 	int (*readdir) (struct file *, void *, filldir_t);
 	unsigned int (*poll) (struct file *, struct poll_table_struct *);
-	int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
 	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
 	long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
@@ -768,10 +767,7 @@ otherwise noted.
 	activity on this file and (optionally) go to sleep until there
 	is activity. Called by the select(2) and poll(2) system calls
 
-  ioctl: called by the ioctl(2) system call
-
-  unlocked_ioctl: called by the ioctl(2) system call. Filesystems that do not
-  	require the BKL should use this method instead of the ioctl() above.
+  unlocked_ioctl: called by the ioctl(2) system call.
 
   compat_ioctl: called by the ioctl(2) system call when 32 bit system calls
  	 are used on 64 bit kernels.
diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt
index 9878f50d6ed6..7bff3e4f35df 100644
--- a/Documentation/filesystems/xfs.txt
+++ b/Documentation/filesystems/xfs.txt
@@ -131,17 +131,6 @@ When mounting an XFS filesystem, the following options are accepted.
 	Don't check for double mounted file systems using the file system uuid.
 	This is useful to mount LVM snapshot volumes.
 
-  osyncisosync
-	Make O_SYNC writes implement true O_SYNC.  WITHOUT this option,
-	Linux XFS behaves as if an "osyncisdsync" option is used,
-	which will make writes to files opened with the O_SYNC flag set
-	behave as if the O_DSYNC flag had been used instead.
-	This can result in better performance without compromising
-	data safety.
-	However if this option is not in effect, timestamp updates from
-	O_SYNC writes can be lost if the system crashes.
-	If timestamp updates are critical, use the osyncisosync option.
-
   uquota/usrquota/uqnoenforce/quota
 	User disk quota accounting enabled, and limits (optionally)
 	enforced.  Refer to xfs_quota(8) for further details.
diff --git a/Documentation/firmware_class/hotplug-script b/Documentation/firmware_class/hotplug-script
index 1990130f2ab1..8143a950b607 100644
--- a/Documentation/firmware_class/hotplug-script
+++ b/Documentation/firmware_class/hotplug-script
@@ -6,11 +6,12 @@
 
 HOTPLUG_FW_DIR=/usr/lib/hotplug/firmware/
 
-echo 1 > /sys/$DEVPATH/loading
-cat $HOTPLUG_FW_DIR/$FIRMWARE > /sys/$DEVPATH/data
-echo 0 > /sys/$DEVPATH/loading
-
-# To cancel the load in case of error:
-#
-#	echo -1 > /sys/$DEVPATH/loading
-#
+if [ "$SUBSYSTEM" == "firmware" -a "$ACTION" == "add" ]; then
+  if [ -f $HOTPLUG_FW_DIR/$FIRMWARE ]; then
+    echo 1 > /sys/$DEVPATH/loading
+    cat $HOTPLUG_FW_DIR/$FIRMWARE > /sys/$DEVPATH/data
+    echo 0 > /sys/$DEVPATH/loading
+  else
+    echo -1 > /sys/$DEVPATH/loading
+  fi
+fi
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index c2c6e9b39bbe..9633da01ff46 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -109,17 +109,19 @@ use numbers 2000-2063 to identify GPIOs in a bank of I2C GPIO expanders.
 
 If you want to initialize a structure with an invalid GPIO number, use
 some negative number (perhaps "-EINVAL"); that will never be valid.  To
-test if a number could reference a GPIO, you may use this predicate:
+test if such number from such a structure could reference a GPIO, you
+may use this predicate:
 
 	int gpio_is_valid(int number);
 
 A number that's not valid will be rejected by calls which may request
 or free GPIOs (see below).  Other numbers may also be rejected; for
-example, a number might be valid but unused on a given board.
-
-Whether a platform supports multiple GPIO controllers is currently a
-platform-specific implementation issue.
+example, a number might be valid but temporarily unused on a given board.
 
+Whether a platform supports multiple GPIO controllers is a platform-specific
+implementation issue, as are whether that support can leave "holes" in the space
+of GPIO numbers, and whether new controllers can be added at runtime.  Such issues
+can affect things including whether adjacent GPIO numbers are both valid.
 
 Using GPIOs
 -----------
@@ -158,10 +160,11 @@ and configure pullups/pulldowns appropriately.)
 Spinlock-Safe GPIO access
 -------------------------
 Most GPIO controllers can be accessed with memory read/write instructions.
-That doesn't need to sleep, and can safely be done from inside IRQ handlers.
-(That includes hardirq contexts on RT kernels.)
+Those don't need to sleep, and can safely be done from inside hard
+(nonthreaded) IRQ handlers and similar contexts.
 
-Use these calls to access such GPIOs:
+Use the following calls to access such GPIOs,
+for which gpio_cansleep() will always return false (see below):
 
 	/* GPIO INPUT:  return zero or nonzero */
 	int gpio_get_value(unsigned gpio);
@@ -210,9 +213,31 @@ To access such GPIOs, a different set of accessors is defined:
 	/* GPIO OUTPUT, might sleep */
 	void gpio_set_value_cansleep(unsigned gpio, int value);
 
-Other than the fact that these calls might sleep, and will not be ignored
-for GPIOs that can't be accessed from IRQ handlers, these calls act the
-same as the spinlock-safe calls.
+
+Accessing such GPIOs requires a context which may sleep,  for example
+a threaded IRQ handler, and those accessors must be used instead of
+spinlock-safe accessors without the cansleep() name suffix.
+
+Other than the fact that these accessors might sleep, and will work
+on GPIOs that can't be accessed from hardIRQ handlers, these calls act
+the same as the spinlock-safe calls.
+
+  ** IN ADDITION ** calls to setup and configure such GPIOs must be made
+from contexts which may sleep, since they may need to access the GPIO
+controller chip too:  (These setup calls are usually made from board
+setup or driver probe/teardown code, so this is an easy constraint.)
+
+	gpio_direction_input()
+	gpio_direction_output()
+	gpio_request()
+
+## 	gpio_request_one()
+##	gpio_request_array()
+## 	gpio_free_array()
+
+	gpio_free()
+	gpio_set_debounce()
+
 
 
 Claiming and Releasing GPIOs
@@ -457,12 +482,16 @@ To support this framework, a platform's Kconfig will "select" either
 ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
 and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
 three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
-They may also want to provide a custom value for ARCH_NR_GPIOS.
 
-ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
+It may also provide a custom value for ARCH_NR_GPIOS, so that it better
+reflects the number of GPIOs in actual use on that platform, without
+wasting static table space.  (It should count both built-in/SoC GPIOs and
+also ones on GPIO expanders.
+
+ARCH_REQUIRE_GPIOLIB means that the gpiolib code will always get compiled
 into the kernel on that architecture.
 
-ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
+ARCH_WANT_OPTIONAL_GPIOLIB means the gpiolib code defaults to off and the user
 can enable it and build it into the kernel optionally.
 
 If neither of these options are selected, the platform does not support
diff --git a/Documentation/hwmon/adm1026 b/Documentation/hwmon/adm1026
index f4327db2307e..d8fabe0c23ac 100644
--- a/Documentation/hwmon/adm1026
+++ b/Documentation/hwmon/adm1026
@@ -6,7 +6,7 @@ Supported chips:
     Prefix: 'adm1026'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
     Datasheet: Publicly available at the Analog Devices website
-               http://www.analog.com/en/prod/0,,766_825_ADM1026,00.html
+               http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026
 
 Authors:
         Philip Pokorny <ppokorny@penguincomputing.com> for Penguin Computing
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index 92267b62db59..25568f844804 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -21,8 +21,8 @@ Temperature is measured in degrees Celsius and measurement resolution is
 1 degree C. Valid temperatures are from 0 to TjMax degrees C, because
 the actual value of temperature register is in fact a delta from TjMax.
 
-Temperature known as TjMax is the maximum junction temperature of processor.
-Intel defines this temperature as 85C or 100C. At this temperature, protection
+Temperature known as TjMax is the maximum junction temperature of processor,
+which depends on the CPU model. See table below. At this temperature, protection
 mechanism will perform actions to forcibly cool down the processor. Alarm
 may be raised, if the temperature grows enough (more than TjMax) to trigger
 the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
@@ -38,3 +38,104 @@ temp1_label	 - Contains string "Core X", where X is processor
 The TjMax temperature is set to 85 degrees C if undocumented model specific
 register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
 (sometimes) documented in processor datasheet.
+
+Appendix A. Known TjMax lists (TBD):
+Some information comes from ark.intel.com
+
+Process		Processor					TjMax(C)
+
+32nm		Core i3/i5/i7 Processors
+		i7 660UM/640/620, 640LM/620, 620M, 610E		105
+		i5 540UM/520/430, 540M/520/450/430		105
+		i3 330E, 370M/350/330				90 rPGA, 105 BGA
+		i3 330UM					105
+
+32nm		Core i7 Extreme Processors
+		980X						100
+
+32nm		Celeron Processors
+		U3400						105
+		P4505/P4500 					90
+
+45nm		Xeon Processors 5400 Quad-Core
+		X5492, X5482, X5472, X5470, X5460, X5450	85
+		E5472, E5462, E5450/40/30/20/10/05		85
+		L5408						95
+		L5430, L5420, L5410				70
+
+45nm		Xeon Processors 5200 Dual-Core
+		X5282, X5272, X5270, X5260			90
+		E5240						90
+		E5205, E5220					70, 90
+		L5240						70
+		L5238, L5215					95
+
+45nm		Atom Processors
+		D525/510/425/410				100
+		Z560/550/540/530P/530/520PT/520/515/510PT/510P	90
+		Z510/500					90
+		N475/470/455/450				100
+		N280/270					90
+		330/230						125
+
+45nm		Core2 Processors
+		Solo ULV SU3500/3300				100
+		T9900/9800/9600/9550/9500/9400/9300/8300/8100	105
+		T6670/6500/6400					105
+		T6600						90
+		SU9600/9400/9300				105
+		SP9600/9400					105
+		SL9600/9400/9380/9300				105
+		P9700/9600/9500/8800/8700/8600/8400/7570	105
+		P7550/7450					90
+
+45nm		Core2 Quad Processors
+		Q9100/9000					100
+
+45nm		Core2 Extreme Processors
+		X9100/9000					105
+		QX9300						100
+
+45nm		Core i3/i5/i7 Processors
+		i7 940XM/920					100
+		i7 840QM/820/740/720				100
+
+45nm		Celeron Processors
+		SU2300						100
+		900 						105
+
+65nm		Core2 Duo Processors
+		Solo U2200, U2100				100
+		U7700/7600/7500					100
+		T7800/7700/7600/7500/7400/7300/7250/7200/7100	100
+		T5870/5670/5600/5550/5500/5470/5450/5300/5270	100
+		T5250						100
+		T5800/5750/5200					85
+		L7700/7500/7400/7300/7200			100
+
+65nm		Core2 Extreme Processors
+		X7900/7800					100
+
+65nm		Core Duo Processors
+		U2500/2400					100
+		T2700/2600/2450/2400/2350/2300E/2300/2250/2050	100
+		L2500/2400/2300					100
+
+65nm		Core Solo Processors
+		U1500/1400/1300					100
+		T1400/1350/1300/1250				100
+
+65nm		Xeon Processors 5000 Quad-Core
+		X5000						90-95
+		E5000						80
+		L5000						70
+		L5318						95
+
+65nm		Xeon Processors 5000 Dual-Core
+		5080, 5063, 5060, 5050, 5030			80-90
+		5160, 5150, 5148, 5140, 5130, 5120, 5110	80
+		L5138						100
+
+65nm		Celeron Processors
+		T1700/1600					100
+		560/550/540/530					100
diff --git a/Documentation/hwmon/emc2103 b/Documentation/hwmon/emc2103
new file mode 100644
index 000000000000..a12b2c127140
--- /dev/null
+++ b/Documentation/hwmon/emc2103
@@ -0,0 +1,33 @@
+Kernel driver emc2103
+======================
+
+Supported chips:
+  * SMSC EMC2103
+    Addresses scanned: I2C 0x2e
+    Prefix: 'emc2103'
+    Datasheet: Not public
+
+Authors:
+        Steve Glendinning <steve.glendinning@smsc.com>
+
+Description
+-----------
+
+The Standard Microsystems Corporation (SMSC) EMC2103 chips
+contain up to 4 temperature sensors and a single fan controller.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 1, the lowest
+representable value is 480 RPM.
+
+This driver supports RPM based control, to use this a fan target
+should be written to fan1_target and pwm1_enable should be set to 3.
+
+The 2103-2 and 2103-4 variants have a third temperature sensor, which can
+be connected to two anti-parallel diodes.  These values can be read
+as temp3 and temp4.  If only one diode is attached to this channel, temp4
+will show as "fault".  The module parameter "apd=0" can be used to suppress
+this 4th channel when anti-parallel diodes are not fitted.
diff --git a/Documentation/hwmon/g760a b/Documentation/hwmon/g760a
index e032eeb75629..cfc894537061 100644
--- a/Documentation/hwmon/g760a
+++ b/Documentation/hwmon/g760a
@@ -5,7 +5,7 @@ Supported chips:
   * Global Mixed-mode Technology Inc. G760A
     Prefix: 'g760a'
     Datasheet: Publicly available at the GMT website
-      http://www.gmt.com.tw/datasheet/g760a.pdf
+      http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
 
 Author: Herbert Valerio Riedel <hvr@gnu.org>
 
diff --git a/Documentation/hwmon/gl518sm b/Documentation/hwmon/gl518sm
index 229f8b789185..26f9f3c02dc7 100644
--- a/Documentation/hwmon/gl518sm
+++ b/Documentation/hwmon/gl518sm
@@ -5,11 +5,10 @@ Supported chips:
   * Genesys Logic GL518SM release 0x00
     Prefix: 'gl518sm'
     Addresses scanned: I2C 0x2c and 0x2d
-    Datasheet: http://www.genesyslogic.com/pdf
   * Genesys Logic GL518SM release 0x80
     Prefix: 'gl518sm'
     Addresses scanned: I2C 0x2c and 0x2d
-    Datasheet: http://www.genesyslogic.com/pdf
+    Datasheet: http://www.genesyslogic.com/
 
 Authors:
         Frodo Looijaard <frodol@dds.nl>,
diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c
index 681ec22b9d0e..a4a8fc5d05d4 100644
--- a/Documentation/hwmon/hpfall.c
+++ b/Documentation/hwmon/hpfall.c
@@ -1,7 +1,7 @@
 /* Disk protection for HP machines.
  *
  * Copyright 2008 Eric Piel
- * Copyright 2009 Pavel Machek <pavel@suse.cz>
+ * Copyright 2009 Pavel Machek <pavel@ucw.cz>
  *
  * GPLv2.
  */
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 8d08bf0d38ed..38425f0f2645 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -22,6 +22,10 @@ Supported chips:
     Prefix: 'it8720'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8721F/IT8758E
+    Prefix: 'it8721'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * SiS950   [clone of IT8705F]
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -67,7 +71,7 @@ Description
 -----------
 
 This driver implements support for the IT8705F, IT8712F, IT8716F,
-IT8718F, IT8720F, IT8726F and SiS950 chips.
+IT8718F, IT8720F, IT8721F, IT8726F, IT8758E and SiS950 chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -86,14 +90,15 @@ the driver won't notice and report changes in the VID value. The two
 upper VID bits share their pins with voltage inputs (in5 and in6) so you
 can't have both on a given board.
 
-The IT8716F, IT8718F, IT8720F and later IT8712F revisions have support for
-2 additional fans. The additional fans are supported by the driver.
+The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
+have support for 2 additional fans. The additional fans are supported by the
+driver.
 
-The IT8716F, IT8718F and IT8720F, and late IT8712F and IT8705F also have
-optional 16-bit tachometer counters for fans 1 to 3. This is better (no more
-fan clock divider mess) but not compatible with the older chips and
-revisions. The 16-bit tachometer mode is enabled by the driver when one
-of the above chips is detected.
+The IT8716F, IT8718F, IT8720F and IT8721F/IT8758E, and late IT8712F and
+IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This
+is better (no more fan clock divider mess) but not compatible with the older
+chips and revisions. The 16-bit tachometer mode is enabled by the driver when
+one of the above chips is detected.
 
 The IT8726F is just bit enhanced IT8716F with additional hardware
 for AMD power sequencing. Therefore the chip will appear as IT8716F
@@ -115,7 +120,12 @@ alarm is triggered if the voltage has crossed a programmable minimum or
 maximum limit. Note that minimum in this case always means 'closest to
 zero'; this is important for negative voltage measurements. All voltage
 inputs can measure voltages between 0 and 4.08 volts, with a resolution of
-0.016 volt. The battery voltage in8 does not have limit registers.
+0.016 volt (except IT8721F/IT8758E: 0.012 volt.) The battery voltage in8 does
+not have limit registers.
+
+On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside
+the chip (in7, in8 and optionally in3). The driver handles this transparently
+so user-space doesn't have to care.
 
 The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value:
 the voltage level your processor should work with. This is hardcoded by
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
new file mode 100644
index 000000000000..0e76ef12e4c6
--- /dev/null
+++ b/Documentation/hwmon/jc42
@@ -0,0 +1,97 @@
+Kernel driver jc42
+==================
+
+Supported chips:
+  * Analog Devices ADT7408
+    Prefix: 'adt7408'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
+  * IDT TSE2002B3, TS3000B3
+    Prefix: 'tse2002b3', 'ts3000b3'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.idt.com/products/getdoc.cfm?docid=18715691
+	http://www.idt.com/products/getdoc.cfm?docid=18715692
+  * Maxim MAX6604
+    Prefix: 'max6604'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
+  * Microchip MCP9805, MCP98242, MCP98243, MCP9843
+    Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
+	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
+  * NXP Semiconductors SE97, SE97B
+    Prefix: 'se97'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.nxp.com/documents/data_sheet/SE97.pdf
+	http://www.nxp.com/documents/data_sheet/SE97B.pdf
+  * NXP Semiconductors SE98
+    Prefix: 'se98'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.nxp.com/documents/data_sheet/SE98.pdf
+  * ON Semiconductor CAT34TS02, CAT6095
+    Prefix: 'cat34ts02', 'cat6095'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheet:
+	http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF
+	http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF
+  * ST Microelectronics STTS424, STTS424E02
+    Prefix: 'stts424'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
+	http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+  * JEDEC JC 42.4 compliant temperature sensor chips
+    Prefix: 'jc42'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheet: -
+
+Author:
+	Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+The driver auto-detects the chips listed above, but can be manually instantiated
+to support other JC 42.4 compliant chips.
+
+Example: the following will load the driver for a generic JC 42.4 compliant
+temperature sensor at address 0x18 on I2C bus #1:
+
+# modprobe jc42
+# echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
+
+A JC 42.4 compliant chip supports a single temperature sensor. Minimum, maximum,
+and critical temperature can be configured. There are alarms for high, low,
+and critical thresholds.
+
+There is also an hysteresis to control the thresholds for resetting alarms.
+Per JC 42.4 specification, the hysteresis threshold can be configured to 0, 1.5,
+3.0, and 6.0 degrees C. Configured hysteresis values will be rounded to those
+limits. The chip supports only a single register to configure the hysteresis,
+which applies to all limits. This register can be written by writing into
+temp1_crit_hyst. Other hysteresis attributes are read-only.
+
+Sysfs entries
+-------------
+
+temp1_input		Temperature (RO)
+temp1_min		Minimum temperature (RW)
+temp1_max		Maximum temperature (RW)
+temp1_crit		Critical high temperature (RW)
+
+temp1_crit_hyst		Critical hysteresis temperature (RW)
+temp1_max_hyst		Maximum hysteresis temperature (RO)
+
+temp1_min_alarm		Temperature low alarm
+temp1_max_alarm		Temperature high alarm
+temp1_crit_alarm	Temperature critical alarm
diff --git a/Documentation/hwmon/k8temp b/Documentation/hwmon/k8temp
index 0005c7166146..716dc24c7237 100644
--- a/Documentation/hwmon/k8temp
+++ b/Documentation/hwmon/k8temp
@@ -5,7 +5,7 @@ Supported chips:
   * AMD Athlon64/FX or Opteron CPUs
     Prefix: 'k8temp'
     Addresses scanned: PCI space
-    Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
+    Datasheet: http://support.amd.com/us/Processor_TechDocs/32559.pdf
 
 Author: Rudolf Marek
 Contact: Rudolf Marek <r.marek@assembler.cz>
diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85
index a76aefeeb68a..239258a63c81 100644
--- a/Documentation/hwmon/lm85
+++ b/Documentation/hwmon/lm85
@@ -9,15 +9,19 @@ Supported chips:
   * Analog Devices ADM1027
     Prefix: 'adm1027'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
-    Datasheet: http://www.analog.com/en/prod/0,,766_825_ADM1027,00.html
+    Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADM1027
   * Analog Devices ADT7463
     Prefix: 'adt7463'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
-    Datasheet: http://www.analog.com/en/prod/0,,766_825_ADT7463,00.html
+    Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7463
+  * Analog Devices ADT7468
+    Prefix: 'adt7468'
+    Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+    Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7468
   * SMSC EMC6D100, SMSC EMC6D101
     Prefix: 'emc6d100'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
-    Datasheet: http://www.smsc.com/main/tools/discontinued/6d100.pdf
+    Datasheet: http://www.smsc.com/media/Downloads_Public/discontinued/6d100.pdf 
   * SMSC EMC6D102
     Prefix: 'emc6d102'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
@@ -34,7 +38,7 @@ Description
 -----------
 
 This driver implements support for the National Semiconductor LM85 and
-compatible chips including the Analog Devices ADM1027, ADT7463 and
+compatible chips including the Analog Devices ADM1027, ADT7463, ADT7468 and
 SMSC EMC6D10x chips family.
 
 The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
@@ -87,14 +91,22 @@ To smooth the response of fans to changes in temperature, the LM85 has an
 optional filter for smoothing temperatures. The ADM1027 has the same
 config option but uses it to rate limit the changes to fan speed instead.
 
-The ADM1027 and ADT7463 have a 10-bit ADC and can therefore measure
-temperatures with 0.25 degC resolution. They also provide an offset to the
-temperature readings that is automatically applied during measurement.
-This offset can be used to zero out any errors due to traces and placement.
-The documentation says that the offset is in 0.25 degC steps, but in
-initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has
-confirmed this "bug". The ADT7463 is reported to work as described in the
-documentation. The current lm85 driver does not show the offset register.
+The ADM1027, ADT7463 and ADT7468 have a 10-bit ADC and can therefore
+measure temperatures with 0.25 degC resolution. They also provide an offset
+to the temperature readings that is automatically applied during
+measurement. This offset can be used to zero out any errors due to traces
+and placement. The documentation says that the offset is in 0.25 degC
+steps, but in initial testing of the ADM1027 it was 1.00 degC steps. Analog
+Devices has confirmed this "bug". The ADT7463 is reported to work as
+described in the documentation. The current lm85 driver does not show the
+offset register.
+
+The ADT7468 has a high-frequency PWM mode, where all PWM outputs are
+driven by a 22.5 kHz clock. This is a global mode, not per-PWM output,
+which means that setting any PWM frequency above 11.3 kHz will switch
+all 3 PWM outputs to a 22.5 kHz frequency. Conversely, setting any PWM
+frequency below 11.3 kHz will switch all 3 PWM outputs to a frequency
+between 10 and 100 Hz, which can then be tuned separately.
 
 See the vendor datasheets for more information. There is application note
 from National (AN-1260) with some additional information about the LM85.
@@ -125,17 +137,17 @@ datasheet for a complete description of the differences. Other than
 identifying the chip, the driver behaves no differently with regard to
 these two chips. The LM85B is recommended for new designs.
 
-The ADM1027 and ADT7463 chips have an optional SMBALERT output that can be
-used to signal the chipset in case a limit is exceeded or the temperature
-sensors fail. Individual sensor interrupts can be masked so they won't
-trigger SMBALERT. The SMBALERT output if configured replaces one of the other
-functions (PWM2 or IN0). This functionality is not implemented in current
-driver.
+The ADM1027, ADT7463 and ADT7468 chips have an optional SMBALERT output
+that can be used to signal the chipset in case a limit is exceeded or the
+temperature sensors fail. Individual sensor interrupts can be masked so
+they won't trigger SMBALERT. The SMBALERT output if configured replaces one
+of the other functions (PWM2 or IN0). This functionality is not implemented
+in current driver.
 
-The ADT7463 also has an optional THERM output/input which can be connected
-to the processor PROC_HOT output. If available, the autofan control
-dynamic Tmin feature can be enabled to keep the system temperature within
-spec (just?!) with the least possible fan noise.
+The ADT7463 and ADT7468 also have an optional THERM output/input which can
+be connected to the processor PROC_HOT output. If available, the autofan
+control dynamic Tmin feature can be enabled to keep the system temperature
+within spec (just?!) with the least possible fan noise.
 
 Configuration Notes
 -------------------
@@ -201,8 +213,8 @@ the temperatures to compensate for systemic errors in the
 measurements. These features are not currently supported by the lm85
 driver.
 
-In addition to the ADM1027 features, the ADT7463 also has Tmin control
-and THERM asserted counts. Automatic Tmin control acts to adjust the
-Tmin value to maintain the measured temperature sensor at a specified
-temperature. There isn't much documentation on this feature in the
-ADT7463 data sheet. This is not supported by current driver.
+In addition to the ADM1027 features, the ADT7463 and ADT7468 also have
+Tmin control and THERM asserted counts. Automatic Tmin control acts to
+adjust the Tmin value to maintain the measured temperature sensor at a
+specified temperature. There isn't much documentation on this feature in
+the ADT7463 data sheet. This is not supported by current driver.
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 6a03dd4bcc94..fa475c0a48a3 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -63,8 +63,8 @@ Supported chips:
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
   * Maxim MAX6659
-    Prefix: 'max6657'
-    Addresses scanned: I2C 0x4c, 0x4d (unsupported 0x4e)
+    Prefix: 'max6659'
+    Addresses scanned: I2C 0x4c, 0x4d, 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
   * Maxim MAX6680
@@ -84,6 +84,21 @@ Supported chips:
     Addresses scanned: I2C 0x4c
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+  * Maxim MAX6695
+    Prefix: 'max6695'
+    Addresses scanned: I2C 0x18
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/datasheet/index.mvp/id/4199
+  * Maxim MAX6696
+    Prefix: 'max6695'
+    Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+                           0x4c, 0x4d and 0x4e
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/datasheet/index.mvp/id/4199
+  * Winbond/Nuvoton W83L771W/G
+    Prefix: 'w83l771'
+    Addresses scanned: I2C 0x4c
+    Datasheet: No longer available
   * Winbond/Nuvoton W83L771AWG/ASG
     Prefix: 'w83l771'
     Addresses scanned: I2C 0x4c
@@ -101,10 +116,11 @@ well as the temperature of up to one external diode. It is compatible
 with many other devices, many of which are supported by this driver.
 
 Note that there is no easy way to differentiate between the MAX6657,
-MAX6658 and MAX6659 variants. The extra address and features of the
-MAX6659 are not supported by this driver. The MAX6680 and MAX6681 only
-differ in their pinout, therefore they obviously can't (and don't need to)
-be distinguished.
+MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only
+supported by this driver if the chip is located at address 0x4d or 0x4e,
+or if the chip type is explicitly selected as max6659.
+The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously
+can't (and don't need to) be distinguished.
 
 The specificity of this family of chipsets over the ADM1021/LM84
 family is that it features critical limits with hysteresis, and an
@@ -151,11 +167,21 @@ MAX6680 and MAX6681:
   * Selectable address
   * Remote sensor type selection
 
+MAX6695 and MAX6696:
+  * Better local resolution
+  * Selectable address (max6696)
+  * Second critical temperature limit
+  * Two remote sensors
+
+W83L771W/G
+  * The G variant is lead-free, otherwise similar to the W.
+  * Filter and alert configuration register at 0xBF
+  * Moving average (depending on conversion rate)
+
 W83L771AWG/ASG
+  * Successor of the W83L771W/G, same features.
   * The AWG and ASG variants only differ in package format.
-  * Filter and alert configuration register at 0xBF
   * Diode ideality factor configuration (remote sensor) at 0xE3
-  * Moving average (depending on conversion rate)
 
 All temperature values are given in degrees Celsius. Resolution
 is 1.0 degree for the local temperature, 0.125 degree for the remote
diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245
index 86b5880d8502..b478b0864965 100644
--- a/Documentation/hwmon/ltc4245
+++ b/Documentation/hwmon/ltc4245
@@ -72,9 +72,31 @@ in6_min_alarm		5v  output undervoltage alarm
 in7_min_alarm		3v  output undervoltage alarm
 in8_min_alarm		Vee (-12v) output undervoltage alarm
 
-in9_input		GPIO voltage data
+in9_input		GPIO voltage data (see note 1)
+in10_input		GPIO voltage data (see note 1)
+in11_input		GPIO voltage data (see note 1)
 
 power1_input		12v power usage (mW)
 power2_input		5v  power usage (mW)
 power3_input		3v  power usage (mW)
 power4_input		Vee (-12v) power usage (mW)
+
+
+Note 1
+------
+
+If you have NOT configured the driver to sample all GPIO pins as analog
+voltages, then the in10_input and in11_input sysfs attributes will not be
+created. The driver will sample the GPIO pin that is currently connected to the
+ADC as an analog voltage, and report the value in in9_input.
+
+If you have configured the driver to sample all GPIO pins as analog voltages,
+then they will be sampled in round-robin fashion. If userspace reads too
+slowly, -EAGAIN will be returned when you read the sysfs attribute containing
+the sensor reading.
+
+The LTC4245 chip can be configured to sample all GPIO pins with two methods:
+1) platform data -- see include/linux/i2c/ltc4245.h
+2) OF device tree -- add the "ltc4245,use-extra-gpios" property to each chip
+
+The default mode of operation is to sample a single GPIO pin.
diff --git a/Documentation/hwmon/ltc4261 b/Documentation/hwmon/ltc4261
new file mode 100644
index 000000000000..eba2e2c4b94d
--- /dev/null
+++ b/Documentation/hwmon/ltc4261
@@ -0,0 +1,63 @@
+Kernel driver ltc4261
+=====================
+
+Supported chips:
+  * Linear Technology LTC4261
+    Prefix: 'ltc4261'
+    Addresses scanned: -
+    Datasheet:
+        http://cds.linear.com/docs/Datasheet/42612fb.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+The LTC4261/LTC4261-2 negative voltage Hot Swap controllers allow a board
+to be safely inserted and removed from a live backplane.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for LTC4261 devices, since there is no register
+which can be safely used to identify the chip. You will have to instantiate
+the devices explicitly.
+
+Example: the following will load the driver for an LTC4261 at address 0x10
+on I2C bus #1:
+$ modprobe ltc4261
+$ echo ltc4261 0x10 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+Voltage readings provided by this driver are reported as obtained from the ADC
+registers. If a set of voltage divider resistors is installed, calculate the
+real voltage by multiplying the reported value with (R1+R2)/R2, where R1 is the
+value of the divider resistor against the measured voltage and R2 is the value
+of the divider resistor against Ground.
+
+Current reading provided by this driver is reported as obtained from the ADC
+Current Sense register. The reported value assumes that a 1 mOhm sense resistor
+is installed. If a different sense resistor is installed, calculate the real
+current by dividing the reported value by the sense resistor value in mOhm.
+
+The chip has two voltage sensors, but only one set of voltage alarm status bits.
+In many many designs, those alarms are associated with the ADIN2 sensor, due to
+the proximity of the ADIN2 pin to the OV pin. ADIN2 is, however, not available
+on all chip variants. To ensure that the alarm condition is reported to the user,
+report it with both voltage sensors.
+
+in1_input		ADIN2 voltage (mV)
+in1_min_alarm		ADIN/ADIN2 Undervoltage alarm
+in1_max_alarm		ADIN/ADIN2 Overvoltage alarm
+
+in2_input		ADIN voltage (mV)
+in2_min_alarm		ADIN/ADIN2 Undervoltage alarm
+in2_max_alarm		ADIN/ADIN2 Overvoltage alarm
+
+curr1_input		SENSE current (mA)
+curr1_alarm		SENSE overcurrent alarm
diff --git a/Documentation/hwmon/pc87427 b/Documentation/hwmon/pc87427
index db5cc1227a83..8fdd08c9e48b 100644
--- a/Documentation/hwmon/pc87427
+++ b/Documentation/hwmon/pc87427
@@ -18,10 +18,11 @@ Description
 
 The National Semiconductor Super I/O chip includes complete hardware
 monitoring capabilities. It can monitor up to 18 voltages, 8 fans and
-6 temperature sensors. Only the fans are supported at the moment.
+6 temperature sensors. Only the fans and temperatures are supported at
+the moment, voltages aren't.
 
-This chip also has fan controlling features, which are not yet supported
-by this driver either.
+This chip also has fan controlling features (up to 4 PWM outputs),
+which are partly supported by this driver.
 
 The driver assumes that no more than one chip is present, which seems
 reasonable.
@@ -36,3 +37,23 @@ signal. Speeds down to 83 RPM can be measured.
 An alarm is triggered if the rotation speed drops below a programmable
 limit. Another alarm is triggered if the speed is too low to be measured
 (including stalled or missing fan).
+
+
+Fan Speed Control
+-----------------
+
+Fan speed can be controlled by PWM outputs. There are 4 possible modes:
+always off, always on, manual and automatic. The latter isn't supported
+by the driver: you can only return to that mode if it was the original
+setting, and the configuration interface is missing.
+
+
+Temperature Monitoring
+----------------------
+
+The PC87427 relies on external sensors (following the SensorPath
+standard), so the resolution and range depend on the type of sensor
+connected. The integer part can be 8-bit or 9-bit, and can be signed or
+not. I couldn't find a way to figure out the external sensor data
+temperature format, so user-space adjustment (typically by a factor 2)
+may be required.
diff --git a/Documentation/hwmon/pcf8591 b/Documentation/hwmon/pcf8591
index e76a7892f68e..ac020b3bb7b3 100644
--- a/Documentation/hwmon/pcf8591
+++ b/Documentation/hwmon/pcf8591
@@ -4,7 +4,7 @@ Kernel driver pcf8591
 Supported chips:
   * Philips/NXP PCF8591
     Prefix: 'pcf8591'
-    Addresses scanned: I2C 0x48 - 0x4f
+    Addresses scanned: none
     Datasheet: Publicly available at the NXP website
                http://www.nxp.com/pip/PCF8591_6.html
 
@@ -58,18 +58,16 @@ Module parameters
 Accessing PCF8591 via /sys interface
 -------------------------------------
 
-! Be careful !
-The PCF8591 is plainly impossible to detect! Stupid chip.
-So every chip with address in the interval [0x48..0x4f] is
-detected as PCF8591. If you have other chips in this address
-range, the workaround is to load this module after the one
-for your others chips.
+The PCF8591 is plainly impossible to detect! Thus the driver won't even
+try. You have to explicitly instantiate the device at the relevant
+address (in the interval [0x48..0x4f]) either through platform data, or
+using the sysfs interface. See Documentation/i2c/instantiating-devices
+for details.
 
-On detection (i.e. insmod, modprobe et al.), directories are being
-created for each detected PCF8591:
+Directories are being created for each instantiated PCF8591:
 
 /sys/bus/i2c/devices/<0>-<1>/
-where <0> is the bus the chip was detected on (e. g. i2c-0)
+where <0> is the bus the chip is connected to (e. g. i2c-0)
 and <1> the chip address ([48..4f])
 
 Inside these directories, there are such files:
diff --git a/Documentation/hwmon/pkgtemp b/Documentation/hwmon/pkgtemp
new file mode 100644
index 000000000000..c8e1fb0fadd3
--- /dev/null
+++ b/Documentation/hwmon/pkgtemp
@@ -0,0 +1,36 @@
+Kernel driver pkgtemp
+======================
+
+Supported chips:
+  * Intel family
+    Prefix: 'pkgtemp'
+    CPUID:
+    Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
+               Volume 3A: System Programming Guide
+
+Author: Fenghua Yu
+
+Description
+-----------
+
+This driver permits reading package level temperature sensor embedded inside
+Intel CPU package. The sensors can be in core, uncore, memory controller, or
+other components in a package. The feature is first implemented in Intel Sandy
+Bridge platform.
+
+Temperature is measured in degrees Celsius and measurement resolution is
+1 degree C. Valid temperatures are from 0 to TjMax degrees C, because the actual
+value of temperature register is in fact a delta from TjMax.
+
+Temperature known as TjMax is the maximum junction temperature of package.
+We get this from MSR_IA32_TEMPERATURE_TARGET. If the MSR is not accessible,
+we define TjMax as 100 degrees Celsius. At this temperature, protection
+mechanism will perform actions to forcibly cool down the package. Alarm
+may be raised, if the temperature grows enough (more than TjMax) to trigger
+the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
+
+temp1_input	  - Package temperature (in millidegrees Celsius).
+temp1_max        - All cooling devices should be turned on.
+temp1_crit	  - Maximum junction temperature (in millidegrees Celsius).
+temp1_crit_alarm - Set when Out-of-spec bit is set, never clears.
+		    Correct CPU operation is no longer guaranteed.
diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665
new file mode 100644
index 000000000000..3820fc9ca52d
--- /dev/null
+++ b/Documentation/hwmon/smm665
@@ -0,0 +1,157 @@
+Kernel driver smm665
+====================
+
+Supported chips:
+  * Summit Microelectronics SMM465
+    Prefix: 'smm465'
+    Addresses scanned: -
+    Datasheet:
+      http://www.summitmicro.com/prod_select/summary/SMM465/SMM465DS.pdf
+  * Summit Microelectronics SMM665, SMM665B
+    Prefix: 'smm665'
+    Addresses scanned: -
+    Datasheet:
+      http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf
+  * Summit Microelectronics SMM665C
+    Prefix: 'smm665c'
+    Addresses scanned: -
+    Datasheet:
+      http://www.summitmicro.com/prod_select/summary/SMM665C/SMM665C_2125.pdf
+  * Summit Microelectronics SMM764
+    Prefix: 'smm764'
+    Addresses scanned: -
+    Datasheet:
+      http://www.summitmicro.com/prod_select/summary/SMM764/SMM764_2098.pdf
+  * Summit Microelectronics SMM766, SMM766B
+    Prefix: 'smm766'
+    Addresses scanned: -
+    Datasheets:
+      http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf
+      http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Module Parameters
+-----------------
+
+* vref: int
+  Default: 1250 (mV)
+  Reference voltage on VREF_ADC pin in mV. It should not be necessary to set
+  this parameter unless a non-default reference voltage is used.
+
+
+Description
+-----------
+
+[From datasheet] The SMM665 is an Active DC Output power supply Controller
+that monitors, margins and cascade sequences power. The part monitors six
+power supply channels as well as VDD, 12V input, two general-purpose analog
+inputs and an internal temperature sensor using a 10-bit ADC.
+
+Each monitored channel has its own high and low limits, plus a critical
+limit.
+
+Support for SMM465, SMM764, and SMM766 has been implemented but is untested.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for devices, since there is no register which
+can be safely used to identify the chip. You will have to instantiate
+the devices explicitly. When instantiating the device, you have to specify
+its configuration register address.
+
+Example: the following will load the driver for an SMM665 at address 0x57
+on I2C bus #1:
+$ modprobe smm665
+$ echo smm665 0x57 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+This driver uses the values in the datasheet to convert ADC register values
+into the values specified in the sysfs-interface document. All attributes are
+read only.
+
+Min, max, lcrit, and crit values are used by the chip to trigger external signals
+and/or other activity. Triggered signals can include HEALTHY, RST, Power Off,
+or Fault depending on the chip configuration. The driver reports values as lcrit
+or crit if exceeding the limits triggers RST, Power Off, or Fault, and as min or
+max otherwise. For details please see the SMM665 datasheet.
+
+For SMM465 and SMM764, values for Channel E and F are reported but undefined.
+
+in1_input		12V input voltage (mV)
+in2_input		3.3V (VDD) input voltage (mV)
+in3_input		Channel A voltage (mV)
+in4_input		Channel B voltage (mV)
+in5_input		Channel C voltage (mV)
+in6_input		Channel D voltage (mV)
+in7_input		Channel E voltage (mV)
+in8_input		Channel F voltage (mV)
+in9_input		AIN1 voltage (mV)
+in10_input		AIN2 voltage (mV)
+
+in1_min			12v input minimum voltage (mV)
+in2_min			3.3V (VDD) input minimum voltage (mV)
+in3_min			Channel A minimum voltage (mV)
+in4_min			Channel B minimum voltage (mV)
+in5_min			Channel C minimum voltage (mV)
+in6_min			Channel D minimum voltage (mV)
+in7_min			Channel E minimum voltage (mV)
+in8_min			Channel F minimum voltage (mV)
+in9_min			AIN1 minimum voltage (mV)
+in10_min		AIN2 minimum voltage (mV)
+
+in1_max			12v input maximum voltage (mV)
+in2_max			3.3V (VDD) input maximum voltage (mV)
+in3_max			Channel A maximum voltage (mV)
+in4_max			Channel B maximum voltage (mV)
+in5_max			Channel C maximum voltage (mV)
+in6_max			Channel D maximum voltage (mV)
+in7_max			Channel E maximum voltage (mV)
+in8_max			Channel F maximum voltage (mV)
+in9_max			AIN1 maximum voltage (mV)
+in10_max		AIN2 maximum voltage (mV)
+
+in1_lcrit		12v input critical minimum voltage (mV)
+in2_lcrit		3.3V (VDD) input critical minimum voltage (mV)
+in3_lcrit		Channel A critical minimum voltage (mV)
+in4_lcrit		Channel B critical minimum voltage (mV)
+in5_lcrit		Channel C critical minimum voltage (mV)
+in6_lcrit		Channel D critical minimum voltage (mV)
+in7_lcrit		Channel E critical minimum voltage (mV)
+in8_lcrit		Channel F critical minimum voltage (mV)
+in9_lcrit		AIN1 critical minimum voltage (mV)
+in10_lcrit		AIN2 critical minimum voltage (mV)
+
+in1_crit		12v input critical maximum voltage (mV)
+in2_crit		3.3V (VDD) input critical maximum voltage (mV)
+in3_crit		Channel A critical maximum voltage (mV)
+in4_crit		Channel B critical maximum voltage (mV)
+in5_crit		Channel C critical maximum voltage (mV)
+in6_crit		Channel D critical maximum voltage (mV)
+in7_crit		Channel E critical maximum voltage (mV)
+in8_crit		Channel F critical maximum voltage (mV)
+in9_crit		AIN1 critical maximum voltage (mV)
+in10_crit		AIN2 critical maximum voltage (mV)
+
+in1_crit_alarm		12v input critical alarm
+in2_crit_alarm		3.3V (VDD) input critical alarm
+in3_crit_alarm		Channel A critical alarm
+in4_crit_alarm		Channel B critical alarm
+in5_crit_alarm		Channel C critical alarm
+in6_crit_alarm		Channel D critical alarm
+in7_crit_alarm		Channel E critical alarm
+in8_crit_alarm		Channel F critical alarm
+in9_crit_alarm		AIN1 critical alarm
+in10_crit_alarm		AIN2 critical alarm
+
+temp1_input		Chip tempererature
+temp1_min		Mimimum chip tempererature
+temp1_max		Maximum chip tempererature
+temp1_crit		Critical chip tempererature
+temp1_crit_alarm	Temperature critical alarm
diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1
index 42c8431b3c9d..2a13378dcf22 100644
--- a/Documentation/hwmon/smsc47m1
+++ b/Documentation/hwmon/smsc47m1
@@ -7,13 +7,10 @@ Supported chips:
     Addresses scanned: none, address read from Super I/O config space
     Prefix: 'smsc47m1'
     Datasheets:
-        http://www.smsc.com/main/datasheets/47b27x.pdf
-        http://www.smsc.com/main/datasheets/47m10x.pdf
-        http://www.smsc.com/main/datasheets/47m112.pdf
-        http://www.smsc.com/main/tools/discontinued/47m13x.pdf
-        http://www.smsc.com/main/datasheets/47m14x.pdf
-        http://www.smsc.com/main/tools/discontinued/47m15x.pdf
-        http://www.smsc.com/main/datasheets/47m192.pdf
+        http://www.smsc.com/media/Downloads_Public/Data_Sheets/47b272.pdf
+        http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m10x.pdf
+        http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m112.pdf
+        http://www.smsc.com/
   * SMSC LPC47M292
     Addresses scanned: none, address read from Super I/O config space
     Prefix: 'smsc47m2'
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index d4e2917c6f18..645699010551 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -91,12 +91,11 @@ name		The chip name.
 		I2C devices get this attribute created automatically.
 		RO
 
-update_rate	The rate at which the chip will update readings.
+update_interval	The interval at which the chip will update readings.
 		Unit: millisecond
 		RW
-		Some devices have a variable update rate. This attribute
-		can be used to change the update rate to the desired
-		frequency.
+		Some devices have a variable update rate or interval.
+		This attribute can be used to change it to the desired value.
 
 
 ************
@@ -107,10 +106,24 @@ in[0-*]_min	Voltage min value.
 		Unit: millivolt
 		RW
 		
+in[0-*]_lcrit	Voltage critical min value.
+		Unit: millivolt
+		RW
+		If voltage drops to or below this limit, the system may
+		take drastic action such as power down or reset. At the very
+		least, it should report a fault.
+
 in[0-*]_max	Voltage max value.
 		Unit: millivolt
 		RW
 		
+in[0-*]_crit	Voltage critical max value.
+		Unit: millivolt
+		RW
+		If voltage reaches or exceeds this limit, the system may
+		take drastic action such as power down or reset. At the very
+		least, it should report a fault.
+
 in[0-*]_input	Voltage input value.
 		Unit: millivolt
 		RO
@@ -284,7 +297,7 @@ temp[1-*]_input Temperature input value.
 		Unit: millidegree Celsius
 		RO
 
-temp[1-*]_crit	Temperature critical value, typically greater than
+temp[1-*]_crit	Temperature critical max value, typically greater than
 		corresponding temp_max values.
 		Unit: millidegree Celsius
 		RW
@@ -296,6 +309,25 @@ temp[1-*]_crit_hyst
 		from the critical value.
 		RW
 
+temp[1-*]_emergency
+		Temperature emergency max value, for chips supporting more than
+		two upper temperature limits. Must be equal or greater than
+		corresponding temp_crit values.
+		Unit: millidegree Celsius
+		RW
+
+temp[1-*]_emergency_hyst
+		Temperature hysteresis value for emergency limit.
+		Unit: millidegree Celsius
+		Must be reported as an absolute temperature, NOT a delta
+		from the emergency value.
+		RW
+
+temp[1-*]_lcrit	Temperature critical min value, typically lower than
+		corresponding temp_min values.
+		Unit: millidegree Celsius
+		RW
+
 temp[1-*]_offset
 		Temperature offset which is added to the temperature reading
 		by the chip.
@@ -344,9 +376,6 @@ Also see the Alarms section for status flags associated with temperatures.
 * Currents *
 ************
 
-Note that no known chip provides current measurements as of writing,
-so this part is theoretical, so to say.
-
 curr[1-*]_max	Current max value
 		Unit: milliampere
 		RW
@@ -471,6 +500,7 @@ limit-related alarms, not both. The driver should just reflect the hardware
 implementation.
 
 in[0-*]_alarm
+curr[1-*]_alarm
 fan[1-*]_alarm
 temp[1-*]_alarm
 		Channel alarm
@@ -482,11 +512,14 @@ OR
 
 in[0-*]_min_alarm
 in[0-*]_max_alarm
+curr[1-*]_min_alarm
+curr[1-*]_max_alarm
 fan[1-*]_min_alarm
 fan[1-*]_max_alarm
 temp[1-*]_min_alarm
 temp[1-*]_max_alarm
 temp[1-*]_crit_alarm
+temp[1-*]_emergency_alarm
 		Limit alarm
 		0: no alarm
 		1: alarm
@@ -497,7 +530,6 @@ to notify open diodes, unconnected fans etc. where the hardware
 supports it. When this boolean has value 1, the measurement for that
 channel should not be trusted.
 
-in[0-*]_fault
 fan[1-*]_fault
 temp[1-*]_fault
 		Input fault condition
@@ -513,6 +545,7 @@ beep_enable	Master beep enable
 		RW
 
 in[0-*]_beep
+curr[1-*]_beep
 fan[1-*]_beep
 temp[1-*]_beep
 		Channel beep
diff --git a/Documentation/hwmon/thmc50 b/Documentation/hwmon/thmc50
index 9639ca93d559..8a7772ade8d0 100644
--- a/Documentation/hwmon/thmc50
+++ b/Documentation/hwmon/thmc50
@@ -9,7 +9,7 @@ Supported chips:
   * Texas Instruments THMC50
     Prefix: 'thmc50'
     Addresses scanned: I2C 0x2c - 0x2e
-    Datasheet: http://focus.ti.com/docs/prod/folders/print/thmc50.html
+    Datasheet: http://www.ti.com/ 
 
 Author: Krzysztof Helt <krzysztof.h1@wp.pl>
 
diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a
index d651b25f7519..e5f90ab5c48d 100644
--- a/Documentation/hwmon/via686a
+++ b/Documentation/hwmon/via686a
@@ -5,7 +5,7 @@ Supported chips:
   * Via VT82C686A, VT82C686B  Southbridge Integrated Hardware Monitor
     Prefix: 'via686a'
     Addresses scanned: ISA in PCI-space encoded address
-    Datasheet: On request through web form (http://www.via.com.tw/en/support/datasheets/)
+    Datasheet: On request through web form (http://www.via.com.tw/en/resources/download-center/)
 
 Authors:
         Kyösti Mälkki <kmalkki@cc.hut.fi>,
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index b7e42ec4b26b..13d556112fc0 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -20,6 +20,10 @@ Supported chips:
     Prefix: 'w83667hg'
     Addresses scanned: ISA address retrieved from Super I/O registers
     Datasheet: not available
+  * Winbond W83667HG-B
+    Prefix: 'w83667hg'
+    Addresses scanned: ISA address retrieved from Super I/O registers
+    Datasheet: Available from Nuvoton upon request
 
 Authors:
         Jean Delvare <khali@linux-fr.org>
@@ -32,8 +36,8 @@ Description
 -----------
 
 This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG, W83627DHG-P and W83667HG super I/O chips. We will refer to them
-collectively as Winbond chips.
+W83627DHG, W83627DHG-P, W83667HG and W83667HG-B super I/O chips.
+We will refer to them collectively as Winbond chips.
 
 The chips implement three temperature sensors, five fan rotation
 speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
@@ -68,14 +72,15 @@ follows:
 temp1 -> pwm1
 temp2 -> pwm2
 temp3 -> pwm3
-prog  -> pwm4 (not on 667HG; the programmable setting is not supported by
-	       the driver)
+prog  -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not
+	       supported by the driver)
 
 /sys files
 ----------
 
 name - this is a standard hwmon device entry. For the W83627EHF and W83627EHG,
-       it is set to "w83627ehf" and for the W83627DHG it is set to "w83627dhg"
+       it is set to "w83627ehf", for the W83627DHG it is set to "w83627dhg",
+       and for the W83667HG it is set to "w83667hg".
 
 pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
 	   0 (stop) to 255 (full)
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index 44dd2bcc72bd..fb145e5e722a 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -5,23 +5,19 @@ Supported chips:
   * Winbond W83627HF (ISA accesses ONLY)
     Prefix: 'w83627hf'
     Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
   * Winbond W83627THF
     Prefix: 'w83627thf'
     Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/w83627thf.pdf
   * Winbond W83697HF
     Prefix: 'w83697hf'
     Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/697hf.pdf
   * Winbond W83637HF
     Prefix: 'w83637hf'
     Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/w83637hf.pdf
   * Winbond W83687THF
     Prefix: 'w83687thf'
     Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: Provided by Winbond on request
+    Datasheet: Provided by Winbond on request(http://www.winbond.com/hq/enu)
 
 Authors:
         Frodo Looijaard <frodol@dds.nl>,
diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d
index c91e0b63ea1d..ecbc1e4574b4 100644
--- a/Documentation/hwmon/w83781d
+++ b/Documentation/hwmon/w83781d
@@ -9,7 +9,7 @@ Supported chips:
   * Winbond W83782D
     Prefix: 'w83782d'
     Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
-    Datasheet: http://www.winbond.com/PDF/sheet/w83782d.pdf
+    Datasheet: http://www.winbond.com
   * Winbond W83783S
     Prefix: 'w83783s'
     Addresses scanned: I2C 0x2d
diff --git a/Documentation/hwmon/w83792d b/Documentation/hwmon/w83792d
index 14a668ed8aaa..8a023ce0b72e 100644
--- a/Documentation/hwmon/w83792d
+++ b/Documentation/hwmon/w83792d
@@ -5,7 +5,7 @@ Supported chips:
   * Winbond W83792D
     Prefix: 'w83792d'
     Addresses scanned: I2C 0x2c - 0x2f
-    Datasheet: http://www.winbond.com.tw/E-WINBONDHTM/partner/PDFresult.asp?Pname=1035
+    Datasheet: http://www.winbond.com.tw
 
 Author: Chunhao Huang
 Contact: DZShen <DZShen@Winbond.com.tw>
diff --git a/Documentation/i2c/busses/i2c-ali1535 b/Documentation/i2c/busses/i2c-ali1535
index acbc65a08097..5d46342e486a 100644
--- a/Documentation/i2c/busses/i2c-ali1535
+++ b/Documentation/i2c/busses/i2c-ali1535
@@ -3,7 +3,7 @@ Kernel driver i2c-ali1535
 Supported adapters:
   * Acer Labs, Inc. ALI 1535 (south bridge)
     Datasheet: Now under NDA
-	http://www.ali.com.tw/eng/support/datasheet_request.php
+	http://www.ali.com.tw/
 
 Authors:
 	Frodo Looijaard <frodol@dds.nl>,
diff --git a/Documentation/i2c/busses/i2c-ali1563 b/Documentation/i2c/busses/i2c-ali1563
index 54691698d2dd..41b1a077e4c7 100644
--- a/Documentation/i2c/busses/i2c-ali1563
+++ b/Documentation/i2c/busses/i2c-ali1563
@@ -3,7 +3,7 @@ Kernel driver i2c-ali1563
 Supported adapters:
   * Acer Labs, Inc. ALI 1563 (south bridge)
     Datasheet: Now under NDA
-	http://www.ali.com.tw/eng/support/datasheet_request.php
+	http://www.ali.com.tw/
 
 Author: Patrick Mochel <mochel@digitalimplant.org>
 
diff --git a/Documentation/i2c/busses/i2c-ali15x3 b/Documentation/i2c/busses/i2c-ali15x3
index 600da90b8f12..42888d8ac124 100644
--- a/Documentation/i2c/busses/i2c-ali15x3
+++ b/Documentation/i2c/busses/i2c-ali15x3
@@ -3,7 +3,7 @@ Kernel driver i2c-ali15x3
 Supported adapters:
   * Acer Labs, Inc. ALI 1533 and 1543C (south bridge)
     Datasheet: Now under NDA
-	http://www.ali.com.tw/eng/support/datasheet_request.php
+	http://www.ali.com.tw/
 
 Authors:
 	Frodo Looijaard <frodol@dds.nl>,
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index e307914a3eda..93fe76e56522 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -15,10 +15,14 @@ Supported adapters:
   * Intel 82801I (ICH9)
   * Intel EP80579 (Tolapai)
   * Intel 82801JI (ICH10)
-  * Intel 3400/5 Series (PCH)
+  * Intel 5/3400 Series (PCH)
   * Intel Cougar Point (PCH)
+  * Intel Patsburg (PCH)
    Datasheets: Publicly available at the Intel website
 
+On Intel Patsburg and later chipsets, both the normal host SMBus controller
+and the additional 'Integrated Device Function' controllers are supported.
+
 Authors: 
 	Mark Studebaker <mdsxyz123@yahoo.com>
 	Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index ac540c71c7eb..475bb4ae0720 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -97,4 +97,4 @@ of all affected systems, so the only safe solution was to prevent access to
 the SMBus on all IBM systems (detected using DMI data.)
 
 For additional information, read:
-http://www.lm-sensors.org/browser/lm-sensors/trunk/README.thinkpad
+http://www.lm-sensors.org/browser/lm-sensors/trunk/README
diff --git a/Documentation/i2c/busses/i2c-sis630 b/Documentation/i2c/busses/i2c-sis630
index 629ea2c356fd..0b9697366930 100644
--- a/Documentation/i2c/busses/i2c-sis630
+++ b/Documentation/i2c/busses/i2c-sis630
@@ -2,7 +2,7 @@ Kernel driver i2c-sis630
 
 Supported adapters:
   * Silicon Integrated Systems Corp (SiS)
-	630 chipset (Datasheet: available at http://amalysh.bei.t-online.de/docs/SIS/)
+	630 chipset (Datasheet: available at http://www.sfr-fresh.com/linux)
 	730 chipset
   * Possible other SiS chipsets ?
 
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index e89490270aba..87da405a8597 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -102,7 +102,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
 	memset(&i2c_info, 0, sizeof(struct i2c_board_info));
 	strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
 	isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
-						   normal_i2c);
+						   normal_i2c, NULL);
 	i2c_put_adapter(i2c_adap);
 	(...)
 }
diff --git a/Documentation/ia64/aliasing.txt b/Documentation/ia64/aliasing.txt
index aa3e953f0f7b..5a4dea6abebd 100644
--- a/Documentation/ia64/aliasing.txt
+++ b/Documentation/ia64/aliasing.txt
@@ -168,8 +168,6 @@ PAST PROBLEM CASES
 
     mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled
 
-      See https://bugzilla.novell.com/show_bug.cgi?id=140858.
-
       The EFI memory map reports the following attributes:
         0x00000-0x9FFFF WB only
         0xA0000-0xBFFFF UC only (VGA frame buffer)
diff --git a/Documentation/ia64/serial.txt b/Documentation/ia64/serial.txt
index 040b9773209f..6869c73de4e2 100644
--- a/Documentation/ia64/serial.txt
+++ b/Documentation/ia64/serial.txt
@@ -133,7 +133,7 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS
 
 
 
-[1] http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+[1] http://www.dig64.org/specifications/agreement 
     The table was originally defined as the "HCDP" for "Headless
     Console/Debug Port."  The current version is the "PCDP" for
     "Primary Console and Debug Port Devices."
diff --git a/Documentation/infiniband/user_verbs.txt b/Documentation/infiniband/user_verbs.txt
index afe3f8da9018..e5092d696da2 100644
--- a/Documentation/infiniband/user_verbs.txt
+++ b/Documentation/infiniband/user_verbs.txt
@@ -5,7 +5,7 @@ USERSPACE VERBS ACCESS
   described in chapter 11 of the InfiniBand Architecture Specification.
 
   To use the verbs, the libibverbs library, available from
-  <http://openib.org/>, is required.  libibverbs contains a
+  http://www.openfabrics.org/, is required.  libibverbs contains a
   device-independent API for using the ib_uverbs interface.
   libibverbs also requires appropriate device-dependent kernel and
   userspace driver for your InfiniBand hardware.  For example, to use
diff --git a/Documentation/input/appletouch.txt b/Documentation/input/appletouch.txt
index 4f7c633a76d2..b13de3f89108 100644
--- a/Documentation/input/appletouch.txt
+++ b/Documentation/input/appletouch.txt
@@ -82,4 +82,4 @@ Links:
 ------
 
 [1]: http://johannes.sipsolutions.net/PowerBook/touchpad/
-[2]: http://web.telia.com/~u89404340/touchpad/index.html
+[2]: http://web.archive.org/web/*/http://web.telia.com/~u89404340/touchpad/index.html
diff --git a/Documentation/input/bcm5974.txt b/Documentation/input/bcm5974.txt
index 5e22dcf6d48d..74d3876d6f34 100644
--- a/Documentation/input/bcm5974.txt
+++ b/Documentation/input/bcm5974.txt
@@ -62,4 +62,4 @@ Links
 -----
 
 [1] http://ubuntuforums.org/showthread.php?t=840040
-[2] http://http://bitmath.org/code/
+[2] http://bitmath.org/code/
diff --git a/Documentation/input/iforce-protocol.txt b/Documentation/input/iforce-protocol.txt
index 3ac92413c874..2d5fbfd6023e 100644
--- a/Documentation/input/iforce-protocol.txt
+++ b/Documentation/input/iforce-protocol.txt
@@ -251,7 +251,7 @@ Check www.immerse.com for Immersion Studio, and www.fcoder.com for ComPortSpy.
 
 ** Author of this document **
 Johann Deneux <johann.deneux@gmail.com>
-Home page at http://www.esil.univ-mrs.fr/~jdeneux/projects/ff/
+Home page at http://web.archive.org/web/*/http://www.esil.univ-mrs.fr
 
 Additions by Vojtech Pavlik.
 
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index c0fc1c75fd88..bdcba154b83e 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -6,31 +6,149 @@ Multi-touch (MT) Protocol
 Introduction
 ------------
 
-In order to utilize the full power of the new multi-touch devices, a way to
-report detailed finger data to user space is needed. This document
-describes the multi-touch (MT) protocol which allows kernel drivers to
-report details for an arbitrary number of fingers.
+In order to utilize the full power of the new multi-touch and multi-user
+devices, a way to report detailed data from multiple contacts, i.e.,
+objects in direct contact with the device surface, is needed.  This
+document describes the multi-touch (MT) protocol which allows kernel
+drivers to report details for an arbitrary number of contacts.
+
+The protocol is divided into two types, depending on the capabilities of the
+hardware. For devices handling anonymous contacts (type A), the protocol
+describes how to send the raw data for all contacts to the receiver. For
+devices capable of tracking identifiable contacts (type B), the protocol
+describes how to send updates for individual contacts via event slots.
+
+
+Protocol Usage
+--------------
+
+Contact details are sent sequentially as separate packets of ABS_MT
+events. Only the ABS_MT events are recognized as part of a contact
+packet. Since these events are ignored by current single-touch (ST)
+applications, the MT protocol can be implemented on top of the ST protocol
+in an existing driver.
+
+Drivers for type A devices separate contact packets by calling
+input_mt_sync() at the end of each packet. This generates a SYN_MT_REPORT
+event, which instructs the receiver to accept the data for the current
+contact and prepare to receive another.
+
+Drivers for type B devices separate contact packets by calling
+input_mt_slot(), with a slot as argument, at the beginning of each packet.
+This generates an ABS_MT_SLOT event, which instructs the receiver to
+prepare for updates of the given slot.
+
+All drivers mark the end of a multi-touch transfer by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new set
+of events/packets.
+
+The main difference between the stateless type A protocol and the stateful
+type B slot protocol lies in the usage of identifiable contacts to reduce
+the amount of data sent to userspace. The slot protocol requires the use of
+the ABS_MT_TRACKING_ID, either provided by the hardware or computed from
+the raw data [5].
+
+For type A devices, the kernel driver should generate an arbitrary
+enumeration of the full set of anonymous contacts currently on the
+surface. The order in which the packets appear in the event stream is not
+important.  Event filtering and finger tracking is left to user space [3].
+
+For type B devices, the kernel driver should associate a slot with each
+identified contact, and use that slot to propagate changes for the contact.
+Creation, replacement and destruction of contacts is achieved by modifying
+the ABS_MT_TRACKING_ID of the associated slot.  A non-negative tracking id
+is interpreted as a contact, and the value -1 denotes an unused slot.  A
+tracking id not previously present is considered new, and a tracking id no
+longer present is considered removed.  Since only changes are propagated,
+the full state of each initiated contact has to reside in the receiving
+end.  Upon receiving an MT event, one simply updates the appropriate
+attribute of the current slot.
+
+
+Protocol Example A
+------------------
+
+Here is what a minimal event sequence for a two-contact touch would look
+like for a type A device:
+
+   ABS_MT_POSITION_X x[0]
+   ABS_MT_POSITION_Y y[0]
+   SYN_MT_REPORT
+   ABS_MT_POSITION_X x[1]
+   ABS_MT_POSITION_Y y[1]
+   SYN_MT_REPORT
+   SYN_REPORT
 
+The sequence after moving one of the contacts looks exactly the same; the
+raw data for all present contacts are sent between every synchronization
+with SYN_REPORT.
 
-Usage
------
+Here is the sequence after lifting the first contact:
+
+   ABS_MT_POSITION_X x[1]
+   ABS_MT_POSITION_Y y[1]
+   SYN_MT_REPORT
+   SYN_REPORT
+
+And here is the sequence after lifting the second contact:
+
+   SYN_MT_REPORT
+   SYN_REPORT
+
+If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
+ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
+last SYN_REPORT will be dropped by the input core, resulting in no
+zero-contact event reaching userland.
 
-Anonymous finger details are sent sequentially as separate packets of ABS
-events. Only the ABS_MT events are recognized as part of a finger
-packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. This instructs the
-receiver to accept the data for the current finger and prepare to receive
-another. The end of a multi-touch transfer is marked by calling the usual
-input_sync() function. This instructs the receiver to act upon events
-accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
-set of events/packets.
+
+Protocol Example B
+------------------
+
+Here is what a minimal event sequence for a two-contact touch would look
+like for a type B device:
+
+   ABS_MT_SLOT 0
+   ABS_MT_TRACKING_ID 45
+   ABS_MT_POSITION_X x[0]
+   ABS_MT_POSITION_Y y[0]
+   ABS_MT_SLOT 1
+   ABS_MT_TRACKING_ID 46
+   ABS_MT_POSITION_X x[1]
+   ABS_MT_POSITION_Y y[1]
+   SYN_REPORT
+
+Here is the sequence after moving contact 45 in the x direction:
+
+   ABS_MT_SLOT 0
+   ABS_MT_POSITION_X x[0]
+   SYN_REPORT
+
+Here is the sequence after lifting the contact in slot 0:
+
+   ABS_MT_TRACKING_ID -1
+   SYN_REPORT
+
+The slot being modified is already 0, so the ABS_MT_SLOT is omitted.  The
+message removes the association of slot 0 with contact 45, thereby
+destroying contact 45 and freeing slot 0 to be reused for another contact.
+
+Finally, here is the sequence after lifting the second contact:
+
+   ABS_MT_SLOT 1
+   ABS_MT_TRACKING_ID -1
+   SYN_REPORT
+
+
+Event Usage
+-----------
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
 minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
-allows for multiple fingers to be tracked.  If the device supports it, the
+allows for multiple contacts to be tracked.  If the device supports it, the
 ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the contact area and approaching finger, respectively.
+of the contact area and approaching contact, respectively.
 
 The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
 looking through a window at someone gently holding a finger against the
@@ -41,56 +159,26 @@ ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
 ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
 against the glass. The inner region will increase, and in general, the
 ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
-unity, is related to the finger pressure. For pressure-based devices,
+unity, is related to the contact pressure. For pressure-based devices,
 ABS_MT_PRESSURE may be used to provide the pressure on the contact area
 instead.
 
-In addition to the MAJOR parameters, the oval shape of the finger can be
+In addition to the MAJOR parameters, the oval shape of the contact can be
 described by adding the MINOR parameters, such that MAJOR and MINOR are the
 major and minor axis of an ellipse. Finally, the orientation of the oval
 shape can be describe with the ORIENTATION parameter.
 
 The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
-finger or a pen or something else.  Devices with more granular information
+contact or a pen or something else.  Devices with more granular information
 may specify general shapes as blobs, i.e., as a sequence of rectangular
 shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
 that currently support it, the ABS_MT_TRACKING_ID event may be used to
-report finger tracking from hardware [5].
+report contact tracking from hardware [5].
 
-Here is what a minimal event sequence for a two-finger touch would look
-like:
-
-   ABS_MT_POSITION_X
-   ABS_MT_POSITION_Y
-   SYN_MT_REPORT
-   ABS_MT_POSITION_X
-   ABS_MT_POSITION_Y
-   SYN_MT_REPORT
-   SYN_REPORT
-
-Here is the sequence after lifting one of the fingers:
-
-   ABS_MT_POSITION_X
-   ABS_MT_POSITION_Y
-   SYN_MT_REPORT
-   SYN_REPORT
-
-And here is the sequence after lifting the remaining finger:
-
-   SYN_MT_REPORT
-   SYN_REPORT
-
-If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
-ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
-last SYN_REPORT will be dropped by the input core, resulting in no
-zero-finger event reaching userland.
 
 Event Semantics
 ---------------
 
-The word "contact" is used to describe a tool which is in direct contact
-with the surface. A finger, a pen or a rubber all classify as contacts.
-
 ABS_MT_TOUCH_MAJOR
 
 The length of the major axis of the contact. The length should be given in
@@ -157,15 +245,16 @@ MT_TOOL_PEN [2].
 ABS_MT_BLOB_ID
 
 The BLOB_ID groups several packets together into one arbitrarily shaped
-contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level trackingID [5]. Most kernel drivers will not have blob
-capability, and can safely omit the event.
+contact. This is a low-level anonymous grouping for type A devices, and
+should not be confused with the high-level trackingID [5]. Most type A
+devices do not have blob capability, so drivers can safely omit this event.
 
 ABS_MT_TRACKING_ID
 
 The TRACKING_ID identifies an initiated contact throughout its life cycle
-[5]. There are currently only a few devices that support it, so this event
-should normally be omitted.
+[5]. This event is mandatory for type B devices. The value range of the
+TRACKING_ID should be large enough to ensure unique identification of a
+contact maintained over an extended period of time.
 
 
 Event Computation
@@ -192,20 +281,11 @@ finger along the X axis (1).
 Finger Tracking
 ---------------
 
-The kernel driver should generate an arbitrary enumeration of the set of
-anonymous contacts currently on the surface. The order in which the packets
-appear in the event stream is not important.
-
 The process of finger tracking, i.e., to assign a unique trackingID to each
-initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the trackingID stays the same and
-unique until the contact vanishes (when the finger leaves the surface). The
-problem of assigning a set of anonymous fingers to a set of identified
-fingers is a euclidian bipartite matching problem at each event update, and
-relies on a sufficiently rapid update rate.
-
-There are a few devices that support trackingID in hardware. User space can
-make use of these native identifiers to reduce bandwidth and cpu usage.
+initiated contact on the surface, is a Euclidian Bipartite Matching
+problem.  At each event synchronization, the set of actual contacts is
+matched to the set of contacts from the previous synchronization. A full
+implementation can be found in [3].
 
 
 Gestures
diff --git a/Documentation/input/ntrig.txt b/Documentation/input/ntrig.txt
new file mode 100644
index 000000000000..be1fd981f73f
--- /dev/null
+++ b/Documentation/input/ntrig.txt
@@ -0,0 +1,126 @@
+N-Trig touchscreen Driver
+-------------------------
+	Copyright (c) 2008-2010 Rafi Rubin <rafi@seas.upenn.edu>
+	Copyright (c) 2009-2010 Stephane Chatty
+
+This driver provides support for N-Trig pen and multi-touch sensors.  Single
+and multi-touch events are translated to the appropriate protocols for
+the hid and input systems.  Pen events are sufficiently hid compliant and
+are left to the hid core.  The driver also provides additional filtering
+and utility functions accessible with sysfs and module parameters.
+
+This driver has been reported to work properly with multiple N-Trig devices
+attached.
+
+
+Parameters
+----------
+
+Note: values set at load time are global and will apply to all applicable
+devices.  Adjusting parameters with sysfs will override the load time values,
+but only for that one device.
+
+The following parameters are used to configure filters to reduce noise:
+
+activate_slack		number of fingers to ignore before processing events
+
+activation_height	size threshold to activate immediately
+activation_width
+
+min_height		size threshold bellow which fingers are ignored
+min_width		both to decide activation and during activity
+
+deactivate_slack	the number of "no contact" frames to ignore before
+			propagating the end of activity events
+
+When the last finger is removed from the device, it sends a number of empty
+frames.  By holding off on deactivation for a few frames we can tolerate false
+erroneous disconnects, where the sensor may mistakenly not detect a finger that
+is still present.  Thus deactivate_slack addresses problems where a users might
+see breaks in lines during drawing, or drop an object during a long drag.
+
+
+Additional sysfs items
+----------------------
+
+These nodes just provide easy access to the ranges reported by the device.
+sensor_logical_height	the range for positions reported during activity
+sensor_logical_width
+
+sensor_physical_height	internal ranges not used for normal events but
+sensor_physical_width	useful for tuning
+
+All N-Trig devices with product id of 1 report events in the ranges of
+X: 0-9600
+Y: 0-7200
+However not all of these devices have the same physical dimensions.  Most
+seem to be 12" sensors (Dell Latitude XT and XT2 and the HP TX2), and
+at least one model (Dell Studio 17) has a 17" sensor.  The ratio of physical
+to logical sizes is used to adjust the size based filter parameters.
+
+
+Filtering
+---------
+
+With the release of the early multi-touch firmwares it became increasingly
+obvious that these sensors were prone to erroneous events.  Users reported
+seeing both inappropriately dropped contact and ghosts, contacts reported
+where no finger was actually touching the screen.
+
+Deactivation slack helps prevent dropped contact for single touch use, but does
+not address the problem of dropping one of more contacts while other contacts
+are still active.  Drops in the multi-touch context require additional
+processing and should be handled in tandem with tacking.
+
+As observed ghost contacts are similar to actual use of the sensor, but they
+seem to have different profiles.  Ghost activity typically shows up as small
+short lived touches.  As such, I assume that the longer the continuous stream
+of events the more likely those events are from a real contact, and that the
+larger the size of each contact the more likely it is real.  Balancing the
+goals of preventing ghosts and accepting real events quickly (to minimize
+user observable latency), the filter accumulates confidence for incoming
+events until it hits thresholds and begins propagating.  In the interest in
+minimizing stored state as well as the cost of operations to make a decision,
+I've kept that decision simple.
+
+Time is measured in terms of the number of fingers reported, not frames since
+the probability of multiple simultaneous ghosts is expected to drop off
+dramatically with increasing numbers.  Rather than accumulate weight as a
+function of size, I just use it as a binary threshold.  A sufficiently large
+contact immediately overrides the waiting period and leads to activation.
+
+Setting the activation size thresholds to large values will result in deciding
+primarily on activation slack.  If you see longer lived ghosts, turning up the
+activation slack while reducing the size thresholds may suffice to eliminate
+the ghosts while keeping the screen quite responsive to firm taps.
+
+Contacts continue to be filtered with min_height and min_width even after
+the initial activation filter is satisfied.  The intent is to provide
+a mechanism for filtering out ghosts in the form of an extra finger while
+you actually are using the screen.  In practice this sort of ghost has
+been far less problematic or relatively rare and I've left the defaults
+set to 0 for both parameters, effectively turning off that filter.
+
+I don't know what the optimal values are for these filters.  If the defaults
+don't work for you, please play with the parameters.  If you do find other
+values more comfortable, I would appreciate feedback.
+
+The calibration of these devices does drift over time.  If ghosts or contact
+dropping worsen and interfere with the normal usage of your device, try
+recalibrating it.
+
+
+Calibration
+-----------
+
+The N-Trig windows tools provide calibration and testing routines.  Also an
+unofficial unsupported set of user space tools including a calibrator is
+available at:
+http://code.launchpad.net/~rafi-seas/+junk/ntrig_calib
+
+
+Tracking
+--------
+
+As of yet, all tested N-Trig firmwares do not track fingers.  When multiple
+contacts are active they seem to be sorted primarily by Y position.
diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt
index b35affd5c649..b2ef125b71f8 100644
--- a/Documentation/input/sentelic.txt
+++ b/Documentation/input/sentelic.txt
@@ -341,7 +341,7 @@ Byte 5~8: Don't care (Absolute packet)
 FSP supports basic PS/2 commanding set and modes, refer to following URL for
 details about PS/2 commands:
 
-http://www.computer-engineering.org/index.php?title=PS/2_Mouse_Interface
+http://www.computer-engineering.org/ps2mouse/
 
 ==============================================================================
 * Programming Sequence for Determining Packet Parsing Flow
diff --git a/Documentation/input/xpad.txt b/Documentation/input/xpad.txt
index aae0d404c566..7cc9a436e6a1 100644
--- a/Documentation/input/xpad.txt
+++ b/Documentation/input/xpad.txt
@@ -150,7 +150,7 @@ the basic functionality.
 
 1. http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki)
 2. http://xpad.xbox-scene.com/
-3. http://www.xboxhackz.com/Hackz-Reference.htm
+3. http://www.markosweb.com/www/xboxhackz.com/ 
 
 4. /proc/bus/usb/devices - dump from InterAct PowerPad Pro (Germany):
 
diff --git a/Documentation/intel_txt.txt b/Documentation/intel_txt.txt
index 5dc59b04a71f..849de1a78e77 100644
--- a/Documentation/intel_txt.txt
+++ b/Documentation/intel_txt.txt
@@ -25,20 +25,18 @@ which has been updated for the new released platforms.
 Intel TXT has been presented at various events over the past few
 years, some of which are:
       LinuxTAG 2008:
-          http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag/
-          details.html?talkid=110
+          http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag.html
       TRUST2008:
-          http://www.trust2008.eu/downloads/Keynote-Speakers/
+          http://www.trust-conference.eu/downloads/Keynote-Speakers/
           3_David-Grawrock_The-Front-Door-of-Trusted-Computing.pdf
-      IDF 2008, Shanghai:
-          http://inteldeveloperforum.com.edgesuite.net/shanghai_2008/
-          aep/PROS003/index.html
+      IDF, Shanghai:
+          http://www.prcidf.com.cn/index_en.html
       IDFs 2006, 2007 (I'm not sure if/where they are online)
 
 Trusted Boot Project Overview:
 =============================
 
-Trusted Boot (tboot) is an open source, pre- kernel/VMM module that
+Trusted Boot (tboot) is an open source, pre-kernel/VMM module that
 uses Intel TXT to perform a measured and verified launch of an OS
 kernel/VMM.
 
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index dd5806f4fcc4..63ffd78824d8 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -74,11 +74,12 @@ Code  Seq#(hex)	Include File		Comments
 0x10	00-0F	drivers/char/s390/vmcp.h
 0x12	all	linux/fs.h
 		linux/blkpg.h
-0x1b	all	InfiniBand Subsystem	<http://www.openib.org/>
+0x1b	all	InfiniBand Subsystem	<http://infiniband.sourceforge.net/>
 0x20	all	drivers/cdrom/cm206.h
 0x22	all	scsi/sg.h
 '#'	00-3F	IEEE 1394 Subsystem	Block for the entire subsystem
 '$'	00-0F	linux/perf_counter.h, linux/perf_event.h
+'&'	00-07	drivers/firewire/nosy-user.h
 '1'	00-1F	<linux/timepps.h>	PPS kit from Ulrich Windl
 					<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
 '2'	01-04	linux/i2o.h
@@ -190,7 +191,7 @@ Code  Seq#(hex)	Include File		Comments
 '['	00-07	linux/usb/tmc.h		USB Test and Measurement Devices
 					<mailto:gregkh@suse.de>
 'a'	all	linux/atm*.h, linux/sonet.h	ATM on linux
-					<http://lrcwww.epfl.ch/linux-atm/magic.html>
+					<http://lrcwww.epfl.ch/>
 'b'	00-FF				conflict! bit3 vme host bridge
 					<mailto:natalia@nikhefk.nikhef.nl>
 'b'	00-0F	media/bt819.h		conflict!
@@ -225,7 +226,7 @@ Code  Seq#(hex)	Include File		Comments
 'k'	00-0F	linux/spi/spidev.h	conflict!
 'k'	00-05	video/kyro.h		conflict!
 'l'	00-3F	linux/tcfs_fs.h		transparent cryptographic file system
-					<http://mikonos.dia.unisa.it/tcfs>
+					<http://web.archive.org/web/*/http://mikonos.dia.unisa.it/tcfs>
 'l'	40-7F	linux/udf_fs_i.h	in development:
 					<http://sourceforge.net/projects/linux-udf/>
 'm'	00-09	linux/mmtimer.h		conflict!
@@ -252,13 +253,13 @@ Code  Seq#(hex)	Include File		Comments
 					<mailto:giometti@linux.it>
 'q'	00-1F	linux/serio.h
 'q'	80-FF	linux/telephony.h	Internet PhoneJACK, Internet LineJACK
-		linux/ixjuser.h		<http://www.quicknet.net>
+		linux/ixjuser.h		<http://web.archive.org/web/*/http://www.quicknet.net>
 'r'	00-1F	linux/msdos_fs.h and fs/fat/dir.c
 's'	all	linux/cdk.h
 't'	00-7F	linux/if_ppp.h
 't'	80-8F	linux/isdn_ppp.h
 't'	90	linux/toshiba.h
-'u'	00-1F	linux/smb_fs.h
+'u'	00-1F	linux/smb_fs.h		gone
 'v'	all	linux/videodev.h	conflict!
 'v'	00-1F	linux/ext2_fs.h		conflict!
 'v'	00-1F	linux/fs.h		conflict!
@@ -277,7 +278,6 @@ Code  Seq#(hex)	Include File		Comments
 					<mailto:oe@port.de>
 'z'	10-4F	drivers/s390/crypto/zcrypt_api.h	conflict!
 0x80	00-1F	linux/fb.h
-0x81	00-1F	linux/videotext.h
 0x88	00-3F	media/ovcamchip.h
 0x89	00-06	arch/x86/include/asm/sockios.h
 0x89	0B-DF	linux/sockios.h
@@ -286,7 +286,7 @@ Code  Seq#(hex)	Include File		Comments
 0x89	F0-FF	linux/sockios.h		SIOCDEVPRIVATE range
 0x8B	all	linux/wireless.h
 0x8C	00-3F				WiNRADiO driver
-					<http://www.proximity.com.au/~brian/winradio/>
+					<http://www.winradio.com.au/>
 0x90	00	drivers/cdrom/sbpcd.h
 0x92	00-0F	drivers/usb/mon/mon_bin.c
 0x93	60-7F	linux/auto_fs.h
diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI
index f172091fb7cd..309eb5ed942b 100644
--- a/Documentation/isdn/INTERFACE.CAPI
+++ b/Documentation/isdn/INTERFACE.CAPI
@@ -113,12 +113,16 @@ char *driver_name
 int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
 	(optional) pointer to a callback function for sending firmware and
 	configuration data to the device
+	The function may return before the operation has completed.
+	Completion must be signalled by a call to capi_ctr_ready().
 	Return value: 0 on success, error code on error
 	Called in process context.
 
 void (*reset_ctr)(struct capi_ctr *ctrlr)
-	(optional) pointer to a callback function for performing a reset on
-	the device, releasing all registered applications
+	(optional) pointer to a callback function for stopping the device,
+	releasing all registered applications
+	The function may return before the operation has completed.
+	Completion must be signalled by a call to capi_ctr_down().
 	Called in process context.
 
 void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
diff --git a/Documentation/isdn/README b/Documentation/isdn/README
index 6783437f21c2..cfb1884342ee 100644
--- a/Documentation/isdn/README
+++ b/Documentation/isdn/README
@@ -36,7 +36,7 @@ README for the ISDN-subsystem
      http://www.mhessler.de/i4lfaq/
   It can be viewed online, or downloaded in sgml/text/html format.
   The FAQ can also be viewed online at
-     http://www.isdn4inux.de/faq/
+     http://www.isdn4linux.de/faq/
   or downloaded from
      ftp://ftp.isdn4linux.de/pub/isdn4linux/FAQ/
 
diff --git a/Documentation/isdn/README.HiSax b/Documentation/isdn/README.HiSax
index 031c8d814337..99e87a61897d 100644
--- a/Documentation/isdn/README.HiSax
+++ b/Documentation/isdn/README.HiSax
@@ -486,7 +486,7 @@ Appendix: Teles PCMCIA driver
 -----------------------------
 
 See
-   http://www.stud.uni-wuppertal.de/~ea0141/pcmcia.html
+   http://www.linux.no/teles_cs.txt 
 for instructions.
 
 Appendix: Linux and ISDN-leased lines
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index e472df842323..ef3343eaa002 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -47,9 +47,9 @@ GigaSet 307x Device Driver
 
 1.2. Software
      --------
-     The driver works with ISDN4linux and so can be used with any software
-     which is able to use ISDN4linux for ISDN connections (voice or data).
-     Experimental Kernel CAPI support is available as a compilation option.
+     The driver works with the Kernel CAPI subsystem as well as the old
+     ISDN4Linux subsystem, so it can be used with any software which is able
+     to use CAPI 2.0 or ISDN4Linux for ISDN connections (voice or data).
 
      There are some user space tools available at
      http://sourceforge.net/projects/gigaset307x/
@@ -152,61 +152,42 @@ GigaSet 307x Device Driver
      - GIGVER_FWBASE: retrieve the firmware version of the base
      Upon return, version[] is filled with the requested version information.
 
-2.3. ISDN4linux
-     ----------
-     This is the "normal" mode of operation. After loading the module you can
-     set up the ISDN system just as you'd do with any ISDN card supported by
-     the ISDN4Linux subsystem. Most distributions provide some configuration
-     utility. If not, you can use some HOWTOs like
-         http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
-     If this doesn't work, because you have some device like SX100 where
-     debug output (see section 3.2.) shows something like this when dialing
-         CMD Received: ERROR
-         Available Params: 0
-         Connection State: 0, Response: -1
-         gigaset_process_response: resp_code -1 in ConState 0 !
-         Timeout occurred
-     you probably need to use unimodem mode. (see section 2.5.)
-
-2.4. CAPI
+2.3. CAPI
      ----
      If the driver is compiled with CAPI support (kernel configuration option
-     GIGASET_CAPI, experimental) it can also be used with CAPI 2.0 kernel and
-     user space applications. For user space access, the module capi.ko must
-     be loaded. The capiinit command (included in the capi4k-utils package)
-     does this for you.
-
-     The CAPI variant of the driver supports legacy ISDN4Linux applications
-     via the capidrv compatibility driver. The kernel module capidrv.ko must
-     be loaded explicitly with the command
+     GIGASET_CAPI) the devices will show up as CAPI controllers as soon as the
+     corresponding driver module is loaded, and can then be used with CAPI 2.0
+     kernel and user space applications. For user space access, the module
+     capi.ko must be loaded.
+
+     Legacy ISDN4Linux applications are supported via the capidrv
+     compatibility driver. The kernel module capidrv.ko must be loaded
+     explicitly with the command
         modprobe capidrv
      if needed, and cannot be unloaded again without unloading the driver
      first. (These are limitations of capidrv.)
 
-     The note about unimodem mode in the preceding section applies here, too.
-
-2.5. Unimodem mode
-     -------------
-     This is needed for some devices [e.g. SX100] as they have problems with
-     the "normal" commands.
+     Most distributions handle loading and unloading of the various CAPI
+     modules automatically via the command capiinit(1) from the capi4k-utils
+     package or a similar mechanism. Note that capiinit(1) cannot unload the
+     Gigaset drivers because it doesn't support more than one module per
+     driver.
 
-     If you have installed the command line tool gigacontr, you can enter
-     unimodem mode using
-         gigacontr --mode unimodem
-     You can switch back using
-         gigacontr --mode isdn
+2.4. ISDN4Linux
+     ----------
+     If the driver is compiled without CAPI support (native ISDN4Linux
+     variant), it registers the device with the legacy ISDN4Linux subsystem
+     after loading the module. It can then be used with ISDN4Linux
+     applications only. Most distributions provide some configuration utility
+     for setting up that subsystem. Otherwise you can use some HOWTOs like
+         http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
 
-     You can also put the driver directly into Unimodem mode when it's loaded,
-     by passing the module parameter startmode=0 to the hardware specific
-     module, e.g.
-	modprobe usb_gigaset startmode=0
-     or by adding a line like
-	options usb_gigaset startmode=0
-     to an appropriate module configuration file, like /etc/modprobe.d/gigaset
-     or /etc/modprobe.conf.local.
 
+2.5. Unimodem mode
+     -------------
      In this mode the device works like a modem connected to a serial port
      (the /dev/ttyGU0, ... mentioned above) which understands the commands
+
          ATZ                 init, reset
              => OK or ERROR
          ATD
@@ -234,6 +215,31 @@ GigaSet 307x Device Driver
      to an appropriate module configuration file, like /etc/modprobe.d/gigaset
      or /etc/modprobe.conf.local.
 
+     Unimodem mode is needed for making some devices [e.g. SX100] work which
+     do not support the regular Gigaset command set. If debug output (see
+     section 3.2.) shows something like this when dialing:
+         CMD Received: ERROR
+         Available Params: 0
+         Connection State: 0, Response: -1
+         gigaset_process_response: resp_code -1 in ConState 0 !
+         Timeout occurred
+     then switching to unimodem mode may help.
+
+     If you have installed the command line tool gigacontr, you can enter
+     unimodem mode using
+         gigacontr --mode unimodem
+     You can switch back using
+         gigacontr --mode isdn
+
+     You can also put the driver directly into Unimodem mode when it's loaded,
+     by passing the module parameter startmode=0 to the hardware specific
+     module, e.g.
+	modprobe usb_gigaset startmode=0
+     or by adding a line like
+	options usb_gigaset startmode=0
+     to an appropriate module configuration file, like /etc/modprobe.d/gigaset
+     or /etc/modprobe.conf.local.
+
 2.6. Call-ID (CID) mode
      ------------------
      Call-IDs are numbers used to tag commands to, and responses from, the
@@ -263,7 +269,22 @@ GigaSet 307x Device Driver
      change its CID mode while the driver is loaded, eg.
         echo 0 > /sys/class/tty/ttyGU0/cidmode
 
-2.7. Unregistered Wireless Devices (M101/M105)
+2.7. Dialing Numbers
+     ---------------
+     The called party number provided by an application for dialing out must
+     be a public network number according to the local dialing plan, without
+     any dial prefix for getting an outside line.
+
+     Internal calls can be made by providing an internal extension number
+     prefixed with "**" (two asterisks) as the called party number. So to dial
+     eg. the first registered DECT handset, give "**11" as the called party
+     number. Dialing "***" (three asterisks) calls all extensions
+     simultaneously (global call).
+
+     This holds for both CAPI 2.0 and ISDN4Linux applications. Unimodem mode
+     does not support internal calls.
+
+2.8. Unregistered Wireless Devices (M101/M105)
      -----------------------------------------
      The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
      the M101 and M105 wireless devices to be used as ISDN devices for ISDN
diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO
index 55476982b5ca..b63301a03811 100644
--- a/Documentation/ja_JP/HOWTO
+++ b/Documentation/ja_JP/HOWTO
@@ -223,7 +223,7 @@ web サイトには、コードの構成、サブシステム、現在存在す�
 あなたがどこからスタートして良いかわからないが、Linux カーネル開発コミュ
 ニティに参加して何かすることをさがしている場合には、Linux kernel
 Janitor's プロジェクトにいけば良いでしょう -
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors
 ここはそのようなスタートをするのにうってつけの場所です。ここには、
 Linux カーネルソースツリーの中に含まれる、きれいにし、修正しなければな
 らない、単純な問題のリストが記述されています。このプロジェクトに関わる
diff --git a/Documentation/ja_JP/SubmittingPatches b/Documentation/ja_JP/SubmittingPatches
index a9dc1243e859..f107c834d242 100644
--- a/Documentation/ja_JP/SubmittingPatches
+++ b/Documentation/ja_JP/SubmittingPatches
@@ -97,7 +97,7 @@ Quilt:
 http://savannah.nongnu.org/projects/quilt
 
 Andrew Morton's patch scripts:
-http://www.zip.com.au/~akpm/linux/patches/
+http://userweb.kernel.org/~akpm/stuff/tpp.txt
 このリンクの先のスクリプトの代わりとして、quilt がパッチマネジメント
 ツールとして推奨されています(上のリンクを見てください)。
 
@@ -210,7 +210,7 @@ VGER.KERNEL.ORG でホスティングされているメーリングリストの�
  ・移植性のないコードから移植性のあるコードへの置き換え(小さい範囲で
    あればアーキテクチャ特有のことでも他の人がコピーできます)
  ・作者やメンテナによる修正(すなわち patch monkey の再転送モード)
-URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
+EMAIL: <trivial@kernel.org>
 
 7) MIME やリンクや圧縮ファイルや添付ファイルではなくプレインテキストのみ
 
@@ -534,7 +534,7 @@ gcc においては、マクロと同じくらい軽いです。
 ----------------------
 
 Andrew Morton, "The perfect patch" (tpp).
-  <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
+  <http://userweb.kernel.org/~akpm/stuff/tpp.txt>
 
 Jeff Garzik, "Linux kernel patch submission format".
   <http://linux.yyz.us/patch-format.html>
diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt
index e903f20077cf..1e5165aa9e4e 100644
--- a/Documentation/kbuild/kbuild.txt
+++ b/Documentation/kbuild/kbuild.txt
@@ -62,15 +62,15 @@ Set the directory to look for the kernel source when building external
 modules.
 The directory can be specified in several ways:
 1) Use "M=..." on the command line
-2) Environmnet variable KBUILD_EXTMOD
-3) Environmnet variable SUBDIRS
+2) Environment variable KBUILD_EXTMOD
+3) Environment variable SUBDIRS
 The possibilities are listed in the order they take precedence.
 Using "M=..." will always override the others.
 
 KBUILD_OUTPUT
 --------------------------------------------------
 Specify the output directory when building the kernel.
-The output directory can also be specificed using "O=...".
+The output directory can also be specified using "O=...".
 Setting "O=..." takes precedence over KBUILD_OUTPUT.
 
 ARCH
@@ -112,7 +112,7 @@ The script will be called with the following arguments:
     $3 - kernel map file
     $4 - default install path (use root directory if blank)
 
-The implmentation of "make install" is architecture specific
+The implementation of "make install" is architecture specific
 and it may differ from the above.
 
 INSTALLKERNEL is provided to enable the possibility to
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index b472e4e0ba67..2fe93ca7c77c 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -322,7 +322,8 @@ mainmenu:
 	"mainmenu" <prompt>
 
 This sets the config program's title bar if the config program chooses
-to use it.
+to use it. It should be placed at the top of the configuration, before any
+other statement.
 
 
 Kconfig hints
diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt
index b2cb16ebcb16..cca46b1a0f6c 100644
--- a/Documentation/kbuild/kconfig.txt
+++ b/Documentation/kbuild/kconfig.txt
@@ -65,7 +65,7 @@ also use the environment variable KCONFIG_ALLCONFIG as a flag or a
 filename that contains config symbols that the user requires to be
 set to a specific value.  If KCONFIG_ALLCONFIG is used without a
 filename, "make *config" checks for a file named
-"all{yes/mod/no/random}.config" (corresponding to the *config command
+"all{yes/mod/no/def/random}.config" (corresponding to the *config command
 that was used) for symbol values that are to be forced.  If this file
 is not found, it checks for a file named "all.config" to contain forced
 values.
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index c899192b37bb..0ef00bd6e54d 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -45,7 +45,6 @@ This document describes the Linux kernel Makefiles.
 		--- 7.1 header-y
 		--- 7.2 objhdr-y
 		--- 7.3 destination-y
-		--- 7.4 unifdef-y (deprecated)
 
 	=== 8 Kbuild Variables
 	=== 9 Makefile language
@@ -168,7 +167,7 @@ more details, with real examples.
 		#drivers/isdn/i4l/Makefile
 		# Makefile for the kernel ISDN subsystem and device drivers.
 		# Each configuration option enables a list of files.
-		obj-$(CONFIG_ISDN)             += isdn.o
+		obj-$(CONFIG_ISDN_I4L)         += isdn.o
 		obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o
 
 --- 3.3 Loadable module goals - obj-m
@@ -187,34 +186,35 @@ more details, with real examples.
 	Note: In this example $(CONFIG_ISDN_PPP_BSDCOMP) evaluates to 'm'
 
 	If a kernel module is built from several source files, you specify
-	that you want to build a module in the same way as above.
-
-	Kbuild needs to know which the parts that you want to build your
-	module from, so you have to tell it by setting an
-	$(<module_name>-objs) variable.
+	that you want to build a module in the same way as above; however,
+	kbuild needs to know which object files you want to build your
+	module from, so you have to tell it by setting a $(<module_name>-y)
+	variable.
 
 	Example:
 		#drivers/isdn/i4l/Makefile
-		obj-$(CONFIG_ISDN) += isdn.o
-		isdn-objs := isdn_net_lib.o isdn_v110.o isdn_common.o
+		obj-$(CONFIG_ISDN_I4L) += isdn.o
+		isdn-y := isdn_net_lib.o isdn_v110.o isdn_common.o
 
 	In this example, the module name will be isdn.o. Kbuild will
-	compile the objects listed in $(isdn-objs) and then run
+	compile the objects listed in $(isdn-y) and then run
 	"$(LD) -r" on the list of these files to generate isdn.o.
 
-	Kbuild recognises objects used for composite objects by the suffix
-	-objs, and the suffix -y. This allows the Makefiles to use
-	the value of a CONFIG_ symbol to determine if an object is part
-	of a composite object.
+	Due to kbuild recognizing $(<module_name>-y) for composite objects,
+	you can use the value of a CONFIG_ symbol to optionally include an
+	object file as part of a composite object.
 
 	Example:
 		#fs/ext2/Makefile
-	        obj-$(CONFIG_EXT2_FS)        += ext2.o
-		ext2-y                       := balloc.o bitmap.o
-	        ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o
+	        obj-$(CONFIG_EXT2_FS) += ext2.o
+		ext2-y := balloc.o dir.o file.o ialloc.o inode.o ioctl.o \
+			  namei.o super.o symlink.o
+	        ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o xattr_user.o \
+						xattr_trusted.o
 
-	In this example, xattr.o is only part of the composite object
-	ext2.o if $(CONFIG_EXT2_FS_XATTR) evaluates to 'y'.
+	In this example, xattr.o, xattr_user.o and xattr_trusted.o are only
+	part of the composite object ext2.o if $(CONFIG_EXT2_FS_XATTR)
+	evaluates to 'y'.
 
 	Note: Of course, when you are building objects into the kernel,
 	the syntax above will also work. So, if you have CONFIG_EXT2_FS=y,
@@ -244,12 +244,12 @@ more details, with real examples.
 	may contain both a built-in.o and a lib.a file.
 
 	Example:
-		#arch/i386/lib/Makefile
-		lib-y    := checksum.o delay.o
+		#arch/x86/lib/Makefile
+		lib-y    := delay.o
 
-	This will create a library lib.a based on checksum.o and delay.o.
-	For kbuild to actually recognize that there is a lib.a being built,
-	the directory shall be listed in libs-y.
+	This will create a library lib.a based on delay.o. For kbuild to
+	actually recognize that there is a lib.a being built, the directory
+	shall be listed in libs-y.
 	See also "6.3 List directories to visit when descending".
 
 	Use of lib-y is normally restricted to lib/ and arch/*/lib.
@@ -284,43 +284,40 @@ more details, with real examples.
 --- 3.7 Compilation flags
 
     ccflags-y, asflags-y and ldflags-y
-	The three flags listed above applies only to the kbuild makefile
-	where they are assigned. They are used for all the normal
-	cc, as and ld invocation happenign during a recursive build.
+	These three flags apply only to the kbuild makefile in which they
+	are assigned. They are used for all the normal cc, as and ld
+	invocations happening during a recursive build.
 	Note: Flags with the same behaviour were previously named:
 	EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS.
-	They are yet supported but their use are deprecated.
+	They are still supported but their usage is deprecated.
 
-	ccflags-y specifies options for compiling C files with $(CC).
+	ccflags-y specifies options for compiling with $(CC).
 
 	Example:
-		# drivers/sound/emu10k1/Makefile
-		ccflags-y += -I$(obj)
-		ccflags-$(DEBUG) += -DEMU10K1_DEBUG
-
+		# drivers/acpi/Makefile
+		ccflags-y := -Os
+		ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
 
 	This variable is necessary because the top Makefile owns the
 	variable $(KBUILD_CFLAGS) and uses it for compilation flags for the
 	entire tree.
 
-	asflags-y is a similar string for per-directory options
-	when compiling assembly language source.
+	asflags-y specifies options for assembling with $(AS).
 
 	Example:
-		#arch/x86_64/kernel/Makefile
-		asflags-y := -traditional
+		#arch/sparc/kernel/Makefile
+		asflags-y := -ansi
 
-
-	ldflags-y is a string for per-directory options to $(LD).
+	ldflags-y specifies options for linking with $(LD).
 
 	Example:
-		#arch/m68k/fpsp040/Makefile
-		ldflags-y := -x
+		#arch/cris/boot/compressed/Makefile
+		ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
 
     subdir-ccflags-y, subdir-asflags-y
-	The two flags listed above are similar to ccflags-y and as-falgs-y.
-	The difference is that the subdir- variants has effect for the kbuild
-	file where tey are present and all subdirectories.
+	The two flags listed above are similar to ccflags-y and asflags-y.
+	The difference is that the subdir- variants have effect for the kbuild
+	file where they are present and all subdirectories.
 	Options specified using subdir-* are added to the commandline before
 	the options specified using the non-subdir variants.
 
@@ -340,18 +337,18 @@ more details, with real examples.
 		CFLAGS_aha152x.o =   -DAHA152X_STAT -DAUTOCONF
 		CFLAGS_gdth.o    = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ \
 				     -DGDTH_STATISTICS
-		CFLAGS_seagate.o =   -DARBITRATE -DPARITY -DSEAGATE_USE_ASM
 
-	These three lines specify compilation flags for aha152x.o,
-	gdth.o, and seagate.o
+	These two lines specify compilation flags for aha152x.o and gdth.o.
 
 	$(AFLAGS_$@) is a similar feature for source files in assembly
 	languages.
 
 	Example:
 		# arch/arm/kernel/Makefile
-		AFLAGS_head-armv.o := -DTEXTADDR=$(TEXTADDR) -traditional
-		AFLAGS_head-armo.o := -DTEXTADDR=$(TEXTADDR) -traditional
+		AFLAGS_head.o        := -DTEXT_OFFSET=$(TEXT_OFFSET)
+		AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
+		AFLAGS_iwmmxt.o      := -Wa,-mcpu=iwmmxt
+
 
 --- 3.9 Dependency tracking
 
@@ -1200,14 +1197,14 @@ When kbuild executes, the following steps are followed (roughly):
 === 7 Kbuild syntax for exported headers
 
 The kernel include a set of headers that is exported to userspace.
-Many headers can be exported as-is but other headers requires  a
+Many headers can be exported as-is but other headers require a
 minimal pre-processing before they are ready for user-space.
 The pre-processing does:
 - drop kernel specific annotations
 - drop include of compiler.h
-- drop all sections that is kernel internat (guarded by ifdef __KERNEL__)
+- drop all sections that are kernel internal (guarded by ifdef __KERNEL__)
 
-Each relevant directory contain a file name "Kbuild" which specify the
+Each relevant directory contains a file name "Kbuild" which specifies the
 headers to be exported.
 See subsequent chapter for the syntax of the Kbuild file.
 
@@ -1254,11 +1251,6 @@ See subsequent chapter for the syntax of the Kbuild file.
 	will be located in the directory "include/linux" when exported.
 
 
-	--- 7.4 unifdef-y (deprecated)
-
-	unifdef-y is deprecated. A direct replacement is header-y.
-
-
 === 8 Kbuild Variables
 
 The top Makefile exports the following variables:
diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt
index 0767cf69c69e..3fb39e0116b4 100644
--- a/Documentation/kbuild/modules.txt
+++ b/Documentation/kbuild/modules.txt
@@ -1,215 +1,185 @@
+Building External Modules
 
-In this document you will find information about:
-- how to build external modules
-- how to make your module use the kbuild infrastructure
-- how kbuild will install a kernel
-- how to install modules in a non-standard location
+This document describes how to build an out-of-tree kernel module.
 
 === Table of Contents
 
 	=== 1 Introduction
-	=== 2 How to build external modules
-	   --- 2.1 Building external modules
-	   --- 2.2 Available targets
-	   --- 2.3 Available options
-	   --- 2.4 Preparing the kernel tree for module build
-	   --- 2.5 Building separate files for a module
-	=== 3. Example commands
-	=== 4. Creating a kbuild file for an external module
-	=== 5. Include files
-	   --- 5.1 How to include files from the kernel include dir
-	   --- 5.2 External modules using an include/ dir
-	   --- 5.3 External modules using several directories
-	=== 6. Module installation
-	   --- 6.1 INSTALL_MOD_PATH
-	   --- 6.2 INSTALL_MOD_DIR
-	=== 7. Module versioning & Module.symvers
-	   --- 7.1 Symbols from the kernel (vmlinux + modules)
-	   --- 7.2 Symbols and external modules
-	   --- 7.3 Symbols from another external module
-	=== 8. Tips & Tricks
-	   --- 8.1 Testing for CONFIG_FOO_BAR
+	=== 2 How to Build External Modules
+	   --- 2.1 Command Syntax
+	   --- 2.2 Options
+	   --- 2.3 Targets
+	   --- 2.4 Building Separate Files
+	=== 3. Creating a Kbuild File for an External Module
+	   --- 3.1 Shared Makefile
+	   --- 3.2 Separate Kbuild file and Makefile
+	   --- 3.3 Binary Blobs
+	   --- 3.4 Building Multiple Modules
+	=== 4. Include Files
+	   --- 4.1 Kernel Includes
+	   --- 4.2 Single Subdirectory
+	   --- 4.3 Several Subdirectories
+	=== 5. Module Installation
+	   --- 5.1 INSTALL_MOD_PATH
+	   --- 5.2 INSTALL_MOD_DIR
+	=== 6. Module Versioning
+	   --- 6.1 Symbols From the Kernel (vmlinux + modules)
+	   --- 6.2 Symbols and External Modules
+	   --- 6.3 Symbols From Another External Module
+	=== 7. Tips & Tricks
+	   --- 7.1 Testing for CONFIG_FOO_BAR
 
 
 
 === 1. Introduction
 
-kbuild includes functionality for building modules both
-within the kernel source tree and outside the kernel source tree.
-The latter is usually referred to as external or "out-of-tree"
-modules and is used both during development and for modules that
-are not planned to be included in the kernel tree.
+"kbuild" is the build system used by the Linux kernel. Modules must use
+kbuild to stay compatible with changes in the build infrastructure and
+to pick up the right flags to "gcc." Functionality for building modules
+both in-tree and out-of-tree is provided. The method for building
+either is similar, and all modules are initially developed and built
+out-of-tree.
 
-What is covered within this file is mainly information to authors
-of modules. The author of an external module should supply
-a makefile that hides most of the complexity, so one only has to type
-'make' to build the module. A complete example will be presented in
-chapter 4, "Creating a kbuild file for an external module".
+Covered in this document is information aimed at developers interested
+in building out-of-tree (or "external") modules. The author of an
+external module should supply a makefile that hides most of the
+complexity, so one only has to type "make" to build the module. This is
+easily accomplished, and a complete example will be presented in
+section 3.
 
 
-=== 2. How to build external modules
+=== 2. How to Build External Modules
 
-kbuild offers functionality to build external modules, with the
-prerequisite that there is a pre-built kernel available with full source.
-A subset of the targets available when building the kernel is available
-when building an external module.
+To build external modules, you must have a prebuilt kernel available
+that contains the configuration and header files used in the build.
+Also, the kernel must have been built with modules enabled. If you are
+using a distribution kernel, there will be a package for the kernel you
+are running provided by your distribution.
 
---- 2.1 Building external modules
+An alternative is to use the "make" target "modules_prepare." This will
+make sure the kernel contains the information required. The target
+exists solely as a simple way to prepare a kernel source tree for
+building external modules.
 
-	Use the following command to build an external module:
+NOTE: "modules_prepare" will not build Module.symvers even if
+CONFIG_MODVERSIONS is set; therefore, a full kernel build needs to be
+executed to make module versioning work.
 
-		make -C <path-to-kernel> M=`pwd`
+--- 2.1 Command Syntax
 
-	For the running kernel use:
+	The command to build an external module is:
 
-		make -C /lib/modules/`uname -r`/build M=`pwd`
+		$ make -C <path_to_kernel_src> M=$PWD
 
-	For the above command to succeed, the kernel must have been
-	built with modules enabled.
+	The kbuild system knows that an external module is being built
+	due to the "M=<dir>" option given in the command.
 
-	To install the modules that were just built:
+	To build against the running kernel use:
 
-		make -C <path-to-kernel> M=`pwd` modules_install
+		$ make -C /lib/modules/`uname -r`/build M=$PWD
 
-	More complex examples will be shown later, the above should
-	be enough to get you started.
+	Then to install the module(s) just built, add the target
+	"modules_install" to the command:
 
---- 2.2 Available targets
+		$ make -C /lib/modules/`uname -r`/build M=$PWD modules_install
 
-	$KDIR refers to the path to the kernel source top-level directory
+--- 2.2 Options
 
-	make -C $KDIR M=`pwd`
-		Will build the module(s) located in current directory.
-		All output files will be located in the same directory
-		as the module source.
-		No attempts are made to update the kernel source, and it is
-		a precondition that a successful make has been executed
-		for the kernel.
+	($KDIR refers to the path of the kernel source directory.)
 
-	make -C $KDIR M=`pwd` modules
-		The modules target is implied when no target is given.
-		Same functionality as if no target was specified.
-		See description above.
+	make -C $KDIR M=$PWD
 
-	make -C $KDIR M=`pwd` modules_install
-		Install the external module(s).
-		Installation default is in /lib/modules/<kernel-version>/extra,
-		but may be prefixed with INSTALL_MOD_PATH - see separate
-		chapter.
+	-C $KDIR
+		The directory where the kernel source is located.
+		"make" will actually change to the specified directory
+		when executing and will change back when finished.
 
-	make -C $KDIR M=`pwd` clean
-		Remove all generated files for the module - the kernel
-		source directory is not modified.
+	M=$PWD
+		Informs kbuild that an external module is being built.
+		The value given to "M" is the absolute path of the
+		directory where the external module (kbuild file) is
+		located.
 
-	make -C $KDIR M=`pwd` help
-		help will list the available target when building external
-		modules.
+--- 2.3 Targets
 
---- 2.3 Available options:
+	When building an external module, only a subset of the "make"
+	targets are available.
 
-	$KDIR refers to the path to the kernel source top-level directory
+	make -C $KDIR M=$PWD [target]
 
-	make -C $KDIR
-		Used to specify where to find the kernel source.
-		'$KDIR' represent the directory where the kernel source is.
-		Make will actually change directory to the specified directory
-		when executed but change back when finished.
+	The default will build the module(s) located in the current
+	directory, so a target does not need to be specified. All
+	output files will also be generated in this directory. No
+	attempts are made to update the kernel source, and it is a
+	precondition that a successful "make" has been executed for the
+	kernel.
 
-	make -C $KDIR M=`pwd`
-		M= is used to tell kbuild that an external module is
-		being built.
-		The option given to M= is the directory where the external
-		module (kbuild file) is located.
-		When an external module is being built only a subset of the
-		usual targets are available.
+	modules
+		The default target for external modules. It has the
+		same functionality as if no target was specified. See
+		description above.
 
-	make -C $KDIR SUBDIRS=`pwd`
-		Same as M=. The SUBDIRS= syntax is kept for backwards
-		compatibility.
+	modules_install
+		Install the external module(s). The default location is
+		/lib/modules/<kernel_release>/extra/, but a prefix may
+		be added with INSTALL_MOD_PATH (discussed in section 5).
 
---- 2.4 Preparing the kernel tree for module build
+	clean
+		Remove all generated files in the module directory only.
 
-	To make sure the kernel contains the information required to
-	build external modules the target 'modules_prepare' must be used.
-	'modules_prepare' exists solely as a simple way to prepare
-	a kernel source tree for building external modules.
-	Note: modules_prepare will not build Module.symvers even if
-	CONFIG_MODVERSIONS is set. Therefore a full kernel build
-	needs to be executed to make module versioning work.
+	help
+		List the available targets for external modules.
 
---- 2.5 Building separate files for a module
-	It is possible to build single files which are part of a module.
-	This works equally well for the kernel, a module and even for
-	external modules.
-	Examples (module foo.ko, consist of bar.o, baz.o):
-		make -C $KDIR M=`pwd` bar.lst
-		make -C $KDIR M=`pwd` bar.o
-		make -C $KDIR M=`pwd` foo.ko
-		make -C $KDIR M=`pwd` /
-
-
-=== 3. Example commands
-
-This example shows the actual commands to be executed when building
-an external module for the currently running kernel.
-In the example below, the distribution is supposed to use the
-facility to locate output files for a kernel compile in a different
-directory than the kernel source - but the examples will also work
-when the source and the output files are mixed in the same directory.
+--- 2.4 Building Separate Files
 
-# Kernel source
-/lib/modules/<kernel-version>/source -> /usr/src/linux-<version>
-
-# Output from kernel compile
-/lib/modules/<kernel-version>/build -> /usr/src/linux-<version>-up
-
-Change to the directory where the kbuild file is located and execute
-the following commands to build the module:
+	It is possible to build single files that are part of a module.
+	This works equally well for the kernel, a module, and even for
+	external modules.
 
-	cd /home/user/src/module
-	make -C /usr/src/`uname -r`/source            \
-	        O=/lib/modules/`uname-r`/build        \
-	        M=`pwd`
+	Example (The module foo.ko, consist of bar.o and baz.o):
+		make -C $KDIR M=$PWD bar.lst
+		make -C $KDIR M=$PWD baz.o
+		make -C $KDIR M=$PWD foo.ko
+		make -C $KDIR M=$PWD /
 
-Then, to install the module use the following command:
 
-	make -C /usr/src/`uname -r`/source            \
-	        O=/lib/modules/`uname-r`/build        \
-	        M=`pwd`                               \
-		modules_install
+=== 3. Creating a Kbuild File for an External Module
 
-If you look closely you will see that this is the same command as
-listed before - with the directories spelled out.
+In the last section we saw the command to build a module for the
+running kernel. The module is not actually built, however, because a
+build file is required. Contained in this file will be the name of
+the module(s) being built, along with the list of requisite source
+files. The file may be as simple as a single line:
 
-The above are rather long commands, and the following chapter
-lists a few tricks to make it all easier.
+	obj-m := <module_name>.o
 
+The kbuild system will build <module_name>.o from <module_name>.c,
+and, after linking, will result in the kernel module <module_name>.ko.
+The above line can be put in either a "Kbuild" file or a "Makefile."
+When the module is built from multiple sources, an additional line is
+needed listing the files:
 
-=== 4. Creating a kbuild file for an external module
+	<module_name>-y := <src1>.o <src2>.o ...
 
-kbuild is the build system for the kernel, and external modules
-must use kbuild to stay compatible with changes in the build system
-and to pick up the right flags to gcc etc.
+NOTE: Further documentation describing the syntax used by kbuild is
+located in Documentation/kbuild/makefiles.txt.
 
-The kbuild file used as input shall follow the syntax described
-in Documentation/kbuild/makefiles.txt. This chapter will introduce a few
-more tricks to be used when dealing with external modules.
+The examples below demonstrate how to create a build file for the
+module 8123.ko, which is built from the following files:
 
-In the following a Makefile will be created for a module with the
-following files:
 	8123_if.c
 	8123_if.h
 	8123_pci.c
 	8123_bin.o_shipped	<= Binary blob
 
---- 4.1 Shared Makefile for module and kernel
+--- 3.1 Shared Makefile
 
-	An external module always includes a wrapper Makefile supporting
-	building the module using 'make' with no arguments.
-	The Makefile provided will most likely include additional
-	functionality such as test targets etc. and this part shall
-	be filtered away from kbuild since it may impact kbuild if
-	name clashes occurs.
+	An external module always includes a wrapper makefile that
+	supports building the module using "make" with no arguments.
+	This target is not used by kbuild; it is only for convenience.
+	Additional functionality, such as test targets, can be included
+	but should be filtered out from kbuild due to possible name
+	clashes.
 
 	Example 1:
 		--> filename: Makefile
@@ -219,11 +189,11 @@ following files:
 		8123-y := 8123_if.o 8123_pci.o 8123_bin.o
 
 		else
-		# Normal Makefile
+		# normal makefile
+		KDIR ?= /lib/modules/`uname -r`/build
 
-		KERNELDIR := /lib/modules/`uname -r`/build
-		all::
-			$(MAKE) -C $(KERNELDIR) M=`pwd` $@
+		default:
+			$(MAKE) -C $(KDIR) M=$$PWD
 
 		# Module specific targets
 		genbin:
@@ -231,15 +201,20 @@ following files:
 
 		endif
 
-	In example 1, the check for KERNELRELEASE is used to separate
-	the two parts of the Makefile. kbuild will only see the two
-	assignments whereas make will see everything except the two
-	kbuild assignments.
+	The check for KERNELRELEASE is used to separate the two parts
+	of the makefile. In the example, kbuild will only see the two
+	assignments, whereas "make" will see everything except these
+	two assignments. This is due to two passes made on the file:
+	the first pass is by the "make" instance run on the command
+	line; the second pass is by the kbuild system, which is
+	initiated by the parameterized "make" in the default target.
+
+--- 3.2 Separate Kbuild File and Makefile
 
-	In recent versions of the kernel, kbuild will look for a file named
-	Kbuild and as second option look for a file named Makefile.
-	Utilising the Kbuild file makes us split up the Makefile in example 1
-	into two files as shown in example 2:
+	In newer versions of the kernel, kbuild will first look for a
+	file named "Kbuild," and only if that is not found, will it
+	then look for a makefile. Utilizing a "Kbuild" file allows us
+	to split up the makefile from example 1 into two files:
 
 	Example 2:
 		--> filename: Kbuild
@@ -247,20 +222,21 @@ following files:
 		8123-y := 8123_if.o 8123_pci.o 8123_bin.o
 
 		--> filename: Makefile
-		KERNELDIR := /lib/modules/`uname -r`/build
-		all::
-			$(MAKE) -C $(KERNELDIR) M=`pwd` $@
+		KDIR ?= /lib/modules/`uname -r`/build
+
+		default:
+			$(MAKE) -C $(KDIR) M=$$PWD
 
 		# Module specific targets
 		genbin:
 			echo "X" > 8123_bin.o_shipped
 
+	The split in example 2 is questionable due to the simplicity of
+	each file; however, some external modules use makefiles
+	consisting of several hundred lines, and here it really pays
+	off to separate the kbuild part from the rest.
 
-	In example 2, we are down to two fairly simple files and for simple
-	files as used in this example the split is questionable. But some
-	external modules use Makefiles of several hundred lines and here it
-	really pays off to separate the kbuild part from the rest.
-	Example 3 shows a backward compatible version.
+	The next example shows a backward compatible version.
 
 	Example 3:
 		--> filename: Kbuild
@@ -269,13 +245,15 @@ following files:
 
 		--> filename: Makefile
 		ifneq ($(KERNELRELEASE),)
+		# kbuild part of makefile
 		include Kbuild
+
 		else
-		# Normal Makefile
+		# normal makefile
+		KDIR ?= /lib/modules/`uname -r`/build
 
-		KERNELDIR := /lib/modules/`uname -r`/build
-		all::
-			$(MAKE) -C $(KERNELDIR) M=`pwd` $@
+		default:
+			$(MAKE) -C $(KDIR) M=$$PWD
 
 		# Module specific targets
 		genbin:
@@ -283,260 +261,271 @@ following files:
 
 		endif
 
-	The trick here is to include the Kbuild file from Makefile, so
-	if an older version of kbuild picks up the Makefile, the Kbuild
-	file will be included.
+	Here the "Kbuild" file is included from the makefile. This
+	allows an older version of kbuild, which only knows of
+	makefiles, to be used when the "make" and kbuild parts are
+	split into separate files.
 
---- 4.2 Binary blobs included in a module
+--- 3.3 Binary Blobs
 
-	Some external modules needs to include a .o as a blob. kbuild
-	has support for this, but requires the blob file to be named
-	<filename>_shipped. In our example the blob is named
-	8123_bin.o_shipped and when the kbuild rules kick in the file
-	8123_bin.o is created as a simple copy off the 8213_bin.o_shipped file
-	with the _shipped part stripped of the filename.
-	This allows the 8123_bin.o filename to be used in the assignment to
-	the module.
+	Some external modules need to include an object file as a blob.
+	kbuild has support for this, but requires the blob file to be
+	named <filename>_shipped. When the kbuild rules kick in, a copy
+	of <filename>_shipped is created with _shipped stripped off,
+	giving us <filename>. This shortened filename can be used in
+	the assignment to the module.
+
+	Throughout this section, 8123_bin.o_shipped has been used to
+	build the kernel module 8123.ko; it has been included as
+	8123_bin.o.
 
-	Example 4:
-		obj-m  := 8123.o
 		8123-y := 8123_if.o 8123_pci.o 8123_bin.o
 
-	In example 4, there is no distinction between the ordinary .c/.h files
-	and the binary file. But kbuild will pick up different rules to create
-	the .o file.
+	Although there is no distinction between the ordinary source
+	files and the binary file, kbuild will pick up different rules
+	when creating the object file for the module.
+
+--- 3.4 Building Multiple Modules
 
+	kbuild supports building multiple modules with a single build
+	file. For example, if you wanted to build two modules, foo.ko
+	and bar.ko, the kbuild lines would be:
 
-=== 5. Include files
+		obj-m := foo.o bar.o
+		foo-y := <foo_srcs>
+		bar-y := <bar_srcs>
 
-Include files are a necessity when a .c file uses something from other .c
-files (not strictly in the sense of C, but if good programming practice is
-used). Any module that consists of more than one .c file will have a .h file
-for one of the .c files.
+	It is that simple!
 
-- If the .h file only describes a module internal interface, then the .h file
-  shall be placed in the same directory as the .c files.
-- If the .h files describe an interface used by other parts of the kernel
-  located in different directories, the .h files shall be located in
-  include/linux/ or other include/ directories as appropriate.
 
-One exception for this rule is larger subsystems that have their own directory
-under include/ such as include/scsi. Another exception is arch-specific
-.h files which are located under include/asm-$(ARCH)/*.
+=== 4. Include Files
 
-External modules have a tendency to locate include files in a separate include/
-directory and therefore need to deal with this in their kbuild file.
+Within the kernel, header files are kept in standard locations
+according to the following rule:
 
---- 5.1 How to include files from the kernel include dir
+	* If the header file only describes the internal interface of a
+	  module, then the file is placed in the same directory as the
+	  source files.
+	* If the header file describes an interface used by other parts
+	  of the kernel that are located in different directories, then
+	  the file is placed in include/linux/.
 
-	When a module needs to include a file from include/linux/, then one
-	just uses:
+	  NOTE: There are two notable exceptions to this rule: larger
+	  subsystems have their own directory under include/, such as
+	  include/scsi; and architecture specific headers are located
+	  under arch/$(ARCH)/include/.
 
-		#include <linux/modules.h>
+--- 4.1 Kernel Includes
 
-	kbuild will make sure to add options to gcc so the relevant
-	directories are searched.
-	Likewise for .h files placed in the same directory as the .c file.
+	To include a header file located under include/linux/, simply
+	use:
 
-		#include "8123_if.h"
+		#include <linux/module.h>
 
-	will do the job.
+	kbuild will add options to "gcc" so the relevant directories
+	are searched.
 
---- 5.2 External modules using an include/ dir
+--- 4.2 Single Subdirectory
 
-	External modules often locate their .h files in a separate include/
-	directory although this is not usual kernel style. When an external
-	module uses an include/ dir then kbuild needs to be told so.
-	The trick here is to use either EXTRA_CFLAGS (take effect for all .c
-	files) or CFLAGS_$F.o (take effect only for a single file).
+	External modules tend to place header files in a separate
+	include/ directory where their source is located, although this
+	is not the usual kernel style. To inform kbuild of the
+	directory, use either ccflags-y or CFLAGS_<filename>.o.
 
-	In our example, if we move 8123_if.h to a subdirectory named include/
-	the resulting Kbuild file would look like:
+	Using the example from section 3, if we moved 8123_if.h to a
+	subdirectory named include, the resulting kbuild file would
+	look like:
 
 		--> filename: Kbuild
-		obj-m  := 8123.o
+		obj-m := 8123.o
 
-		EXTRA_CFLAGS := -Iinclude
+		ccflags-y := -Iinclude
 		8123-y := 8123_if.o 8123_pci.o 8123_bin.o
 
-	Note that in the assignment there is no space between -I and the path.
-	This is a kbuild limitation:  there must be no space present.
+	Note that in the assignment there is no space between -I and
+	the path. This is a limitation of kbuild: there must be no
+	space present.
 
---- 5.3 External modules using several directories
-
-	If an external module does not follow the usual kernel style, but
-	decides to spread files over several directories, then kbuild can
-	handle this too.
+--- 4.3 Several Subdirectories
 
+	kbuild can handle files that are spread over several directories.
 	Consider the following example:
 
-	|
-	+- src/complex_main.c
-	|   +- hal/hardwareif.c
-	|   +- hal/include/hardwareif.h
-	+- include/complex.h
-
-	To build a single module named complex.ko, we then need the following
+	.
+	|__ src
+	|   |__ complex_main.c
+	|   |__ hal
+	|	|__ hardwareif.c
+	|	|__ include
+	|	    |__ hardwareif.h
+	|__ include
+	    |__ complex.h
+
+	To build the module complex.ko, we then need the following
 	kbuild file:
 
-	Kbuild:
+		--> filename: Kbuild
 		obj-m := complex.o
 		complex-y := src/complex_main.o
 		complex-y += src/hal/hardwareif.o
 
-		EXTRA_CFLAGS := -I$(src)/include
-		EXTRA_CFLAGS += -I$(src)src/hal/include
+		ccflags-y := -I$(src)/include
+		ccflags-y += -I$(src)/src/hal/include
 
+	As you can see, kbuild knows how to handle object files located
+	in other directories. The trick is to specify the directory
+	relative to the kbuild file's location. That being said, this
+	is NOT recommended practice.
 
-	kbuild knows how to handle .o files located in another directory -
-	although this is NOT recommended practice. The syntax is to specify
-	the directory relative to the directory where the Kbuild file is
-	located.
+	For the header files, kbuild must be explicitly told where to
+	look. When kbuild executes, the current directory is always the
+	root of the kernel tree (the argument to "-C") and therefore an
+	absolute path is needed. $(src) provides the absolute path by
+	pointing to the directory where the currently executing kbuild
+	file is located.
 
-	To find the .h files, we have to explicitly tell kbuild where to look
-	for the .h files. When kbuild executes, the current directory is always
-	the root of the kernel tree (argument to -C) and therefore we have to
-	tell kbuild how to find the .h files using absolute paths.
-	$(src) will specify the absolute path to the directory where the
-	Kbuild file are located when being build as an external module.
-	Therefore -I$(src)/ is used to point out the directory of the Kbuild
-	file and any additional path are just appended.
 
-=== 6. Module installation
+=== 5. Module Installation
 
-Modules which are included in the kernel are installed in the directory:
+Modules which are included in the kernel are installed in the
+directory:
 
-	/lib/modules/$(KERNELRELEASE)/kernel
+	/lib/modules/$(KERNELRELEASE)/kernel/
 
-External modules are installed in the directory:
+And external modules are installed in:
 
-	/lib/modules/$(KERNELRELEASE)/extra
+	/lib/modules/$(KERNELRELEASE)/extra/
 
---- 6.1 INSTALL_MOD_PATH
+--- 5.1 INSTALL_MOD_PATH
 
-	Above are the default directories, but as always, some level of
-	customization is possible. One can prefix the path using the variable
-	INSTALL_MOD_PATH:
+	Above are the default directories but as always some level of
+	customization is possible. A prefix can be added to the
+	installation path using the variable INSTALL_MOD_PATH:
 
 		$ make INSTALL_MOD_PATH=/frodo modules_install
-		=> Install dir: /frodo/lib/modules/$(KERNELRELEASE)/kernel
-
-	INSTALL_MOD_PATH may be set as an ordinary shell variable or as in the
-	example above, can be specified on the command line when calling make.
-	INSTALL_MOD_PATH has effect both when installing modules included in
-	the kernel as well as when installing external modules.
+		=> Install dir: /frodo/lib/modules/$(KERNELRELEASE)/kernel/
 
---- 6.2 INSTALL_MOD_DIR
+	INSTALL_MOD_PATH may be set as an ordinary shell variable or,
+	as shown above, can be specified on the command line when
+	calling "make." This has effect when installing both in-tree
+	and out-of-tree modules.
 
-	When installing external modules they are by default installed to a
-	directory under /lib/modules/$(KERNELRELEASE)/extra, but one may wish
-	to locate modules for a specific functionality in a separate
-	directory. For this purpose, one can use INSTALL_MOD_DIR to specify an
-	alternative name to 'extra'.
+--- 5.2 INSTALL_MOD_DIR
 
-		$ make INSTALL_MOD_DIR=gandalf -C KERNELDIR \
-			M=`pwd` modules_install
-		=> Install dir: /lib/modules/$(KERNELRELEASE)/gandalf
+	External modules are by default installed to a directory under
+	/lib/modules/$(KERNELRELEASE)/extra/, but you may wish to
+	locate modules for a specific functionality in a separate
+	directory. For this purpose, use INSTALL_MOD_DIR to specify an
+	alternative name to "extra."
 
+		$ make INSTALL_MOD_DIR=gandalf -C $KDIR \
+		       M=$PWD modules_install
+		=> Install dir: /lib/modules/$(KERNELRELEASE)/gandalf/
 
-=== 7. Module versioning & Module.symvers
 
-Module versioning is enabled by the CONFIG_MODVERSIONS tag.
+=== 6. Module Versioning
 
-Module versioning is used as a simple ABI consistency check. The Module
-versioning creates a CRC value of the full prototype for an exported symbol and
-when a module is loaded/used then the CRC values contained in the kernel are
-compared with similar values in the module. If they are not equal, then the
-kernel refuses to load the module.
+Module versioning is enabled by the CONFIG_MODVERSIONS tag, and is used
+as a simple ABI consistency check. A CRC value of the full prototype
+for an exported symbol is created. When a module is loaded/used, the
+CRC values contained in the kernel are compared with similar values in
+the module; if they are not equal, the kernel refuses to load the
+module.
 
-Module.symvers contains a list of all exported symbols from a kernel build.
+Module.symvers contains a list of all exported symbols from a kernel
+build.
 
---- 7.1 Symbols from the kernel (vmlinux + modules)
+--- 6.1 Symbols From the Kernel (vmlinux + modules)
 
-	During a kernel build, a file named Module.symvers will be generated.
-	Module.symvers contains all exported symbols from the kernel and
-	compiled modules. For each symbols, the corresponding CRC value
-	is stored too.
+	During a kernel build, a file named Module.symvers will be
+	generated. Module.symvers contains all exported symbols from
+	the kernel and compiled modules. For each symbol, the
+	corresponding CRC value is also stored.
 
 	The syntax of the Module.symvers file is:
-		<CRC>       <Symbol>           <module>
-	Sample:
+		<CRC>	    <Symbol>	       <module>
+
 		0x2d036834  scsi_remove_host   drivers/scsi/scsi_mod
 
-	For a kernel build without CONFIG_MODVERSIONS enabled, the crc
-	would read: 0x00000000
+	For a kernel build without CONFIG_MODVERSIONS enabled, the CRC
+	would read 0x00000000.
 
 	Module.symvers serves two purposes:
-	1) It lists all exported symbols both from vmlinux and all modules
-	2) It lists the CRC if CONFIG_MODVERSIONS is enabled
-
---- 7.2 Symbols and external modules
-
-	When building an external module, the build system needs access to
-	the symbols from the kernel to check if all external symbols are
-	defined. This is done in the MODPOST step and to obtain all
-	symbols, modpost reads Module.symvers from the kernel.
-	If a Module.symvers file is present in the directory where
-	the external module is being built, this file will be read too.
-	During the MODPOST step, a new Module.symvers file will be written
-	containing all exported symbols that were not defined in the kernel.
-
---- 7.3 Symbols from another external module
-
-	Sometimes, an external module uses exported symbols from another
-	external module. Kbuild needs to have full knowledge on all symbols
-	to avoid spitting out warnings about undefined symbols.
-	Three solutions exist to let kbuild know all symbols of more than
-	one external module.
-	The method with a top-level kbuild file is recommended but may be
-	impractical in certain situations.
-
-	Use a top-level Kbuild file
-		If you have two modules: 'foo' and 'bar', and 'foo' needs
-		symbols from 'bar', then one can use a common top-level kbuild
-		file so both modules are compiled in same build.
-
-		Consider following directory layout:
-		./foo/ <= contains the foo module
-		./bar/ <= contains the bar module
-		The top-level Kbuild file would then look like:
-
-		#./Kbuild: (this file may also be named Makefile)
+	1) It lists all exported symbols from vmlinux and all modules.
+	2) It lists the CRC if CONFIG_MODVERSIONS is enabled.
+
+--- 6.2 Symbols and External Modules
+
+	When building an external module, the build system needs access
+	to the symbols from the kernel to check if all external symbols
+	are defined. This is done in the MODPOST step. modpost obtains
+	the symbols by reading Module.symvers from the kernel source
+	tree. If a Module.symvers file is present in the directory
+	where the external module is being built, this file will be
+	read too. During the MODPOST step, a new Module.symvers file
+	will be written containing all exported symbols that were not
+	defined in the kernel.
+
+--- 6.3 Symbols From Another External Module
+
+	Sometimes, an external module uses exported symbols from
+	another external module. kbuild needs to have full knowledge of
+	all symbols to avoid spitting out warnings about undefined
+	symbols. Three solutions exist for this situation.
+
+	NOTE: The method with a top-level kbuild file is recommended
+	but may be impractical in certain situations.
+
+	Use a top-level kbuild file
+		If you have two modules, foo.ko and bar.ko, where
+		foo.ko needs symbols from bar.ko, you can use a
+		common top-level kbuild file so both modules are
+		compiled in the same build. Consider the following
+		directory layout:
+
+		./foo/ <= contains foo.ko
+		./bar/ <= contains bar.ko
+
+		The top-level kbuild file would then look like:
+
+		#./Kbuild (or ./Makefile):
 			obj-y := foo/ bar/
 
-		Executing:
-			make -C $KDIR M=`pwd`
+		And executing
+
+			$ make -C $KDIR M=$PWD
 
-		will then do the expected and compile both modules with full
-		knowledge on symbols from both modules.
+		will then do the expected and compile both modules with
+		full knowledge of symbols from either module.
 
 	Use an extra Module.symvers file
-		When an external module is built, a Module.symvers file is
-		generated containing all exported symbols which are not
-		defined in the kernel.
-		To get access to symbols from module 'bar', one can copy the
-		Module.symvers file from the compilation of the 'bar' module
-		to the directory where the 'foo' module is built.
-		During the module build, kbuild will read the Module.symvers
-		file in the directory of the external module and when the
-		build is finished, a new Module.symvers file is created
-		containing the sum of all symbols defined and not part of the
-		kernel.
-
-	Use make variable KBUILD_EXTRA_SYMBOLS in the Makefile
-		If it is impractical to copy Module.symvers from another
-		module, you can assign a space separated list of files to
-		KBUILD_EXTRA_SYMBOLS in your Makfile. These files will be
-		loaded by modpost during the initialisation of its symbol
-		tables.
-
-=== 8. Tips & Tricks
-
---- 8.1 Testing for CONFIG_FOO_BAR
-
-	Modules often need to check for certain CONFIG_ options to decide if
-	a specific feature shall be included in the module. When kbuild is used
-	this is done by referencing the CONFIG_ variable directly.
+		When an external module is built, a Module.symvers file
+		is generated containing all exported symbols which are
+		not defined in the kernel. To get access to symbols
+		from bar.ko, copy the Module.symvers file from the
+		compilation of bar.ko to the directory where foo.ko is
+		built. During the module build, kbuild will read the
+		Module.symvers file in the directory of the external
+		module, and when the build is finished, a new
+		Module.symvers file is created containing the sum of
+		all symbols defined and not part of the kernel.
+
+	Use "make" variable KBUILD_EXTRA_SYMBOLS
+		If it is impractical to copy Module.symvers from
+		another module, you can assign a space separated list
+		of files to KBUILD_EXTRA_SYMBOLS in your build file.
+		These files will be loaded by modpost during the
+		initialization of its symbol tables.
+
+
+=== 7. Tips & Tricks
+
+--- 7.1 Testing for CONFIG_FOO_BAR
+
+	Modules often need to check for certain CONFIG_ options to
+	decide if a specific feature is included in the module. In
+	kbuild this is done by referencing the CONFIG_ variable
+	directly.
 
 		#fs/ext2/Makefile
 		obj-$(CONFIG_EXT2_FS) += ext2.o
@@ -544,9 +533,9 @@ Module.symvers contains a list of all exported symbols from a kernel build.
 		ext2-y := balloc.o bitmap.o dir.o
 		ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o
 
-	External modules have traditionally used grep to check for specific
-	CONFIG_ settings directly in .config. This usage is broken.
-	As introduced before, external modules shall use kbuild when building
-	and therefore can use the same methods as in-kernel modules when
-	testing for CONFIG_ definitions.
+	External modules have traditionally used "grep" to check for
+	specific CONFIG_ settings directly in .config. This usage is
+	broken. As introduced before, external modules should use
+	kbuild for building and can therefore use the same methods as
+	in-tree modules when testing for CONFIG_ definitions.
 
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 27a52b35d55b..3d8a97747f77 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -345,5 +345,10 @@ documentation, in <filename>, for the functions listed.
 section titled <section title> from <filename>.
 Spaces are allowed in <section title>; do not quote the <section title>.
 
+!C<filename> is replaced by nothing, but makes the tools check that
+all DOC: sections and documented functions, symbols, etc. are used.
+This makes sense to use when you use !F/!P only and want to verify
+that all documentation is included.
+
 Tim.
 */ <twaugh@redhat.com>
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index ec8d31ee12e0..715eaaf1519d 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -75,7 +75,7 @@
 
      * Title: "Conceptual Architecture of the Linux Kernel"
        Author: Ivan T. Bowman.
-       URL: http://plg.uwaterloo.ca/~itbowman/papers/CS746G-a1.html
+       URL: http://plg.uwaterloo.ca/
        Keywords: conceptual software architecture, extracted design,
        reverse engineering, system structure.
        Description: Conceptual software architecture of the Linux kernel,
@@ -84,7 +84,7 @@
 
      * Title: "Concrete Architecture of the Linux Kernel"
        Author: Ivan T. Bowman, Saheem Siddiqi, and Meyer C. Tanuan.
-       URL: http://plg.uwaterloo.ca/~itbowman/papers/CS746G-a2.html
+       URL: http://plg.uwaterloo.ca/
        Keywords: concrete architecture, extracted design, reverse
        engineering, system structure, dependencies.
        Description: Concrete architecture of the Linux kernel,
@@ -95,7 +95,7 @@
      * Title: "Linux as a Case Study: Its Extracted Software
        Architecture"
        Author: Ivan T. Bowman, Richard C. Holt and Neil V. Brewster.
-       URL: http://plg.uwaterloo.ca/~itbowman/papers/linuxcase.html
+       URL: http://plg.uwaterloo.ca/
        Keywords: software architecture, architecture recovery,
        redocumentation.
        Description: Paper appeared at ICSE'99, Los Angeles, May 16-22,
@@ -104,7 +104,7 @@
 
      * Title: "Overview of the Virtual File System"
        Author: Richard Gooch.
-       URL: http://www.atnf.csiro.au/~rgooch/linux/vfs.txt
+       URL: http://www.mjmwired.net/kernel/Documentation/filesystems/vfs.txt
        Keywords: VFS, File System, mounting filesystems, opening files,
        dentries, dcache.
        Description: Brief introduction to the Linux Virtual File System.
@@ -267,15 +267,13 @@
      * Title: "Kernel API changes from 2.0 to 2.2"
        Author: Richard Gooch.
        URL:
-       http://www.atnf.csiro.au/~rgooch/linux/docs/porting-to-2.2.html
+       http://www.linuxhq.com/guides/LKMPG/node28.html 
        Keywords: 2.2, changes.
        Description: Kernel functions/structures/variables which changed
        from 2.0.x to 2.2.x.
 
      * Title: "Kernel API changes from 2.2 to 2.4"
        Author: Richard Gooch.
-       URL:
-       http://www.atnf.csiro.au/~rgooch/linux/docs/porting-to-2.4.html
        Keywords: 2.4, changes.
        Description: Kernel functions/structures/variables which changed
        from 2.2.x to 2.4.x.
@@ -290,7 +288,6 @@
        
      * Title: "I/O Event Handling Under Linux"
        Author: Richard Gooch.
-       URL: http://www.atnf.csiro.au/~rgooch/linux/docs/io-events.html
        Keywords: IO, I/O, select(2), poll(2), FDs, aio_read(2), readiness
        event queues.
        Description: From the Introduction: "I/O Event handling is about
@@ -386,64 +383,64 @@
 
      * Title: "Porting Device Drivers To Linux 2.2: part II"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-06/gear_01.html
+       URL: http://www.linux-mag.com/id/238 
        Keywords: ports, porting.
        Description: Second part on porting from 2.0 to 2.2 kernels.
 
      * Title: "How To Make Sure Your Driver Will Work On The Power
        Macintosh"
        Author: Paul Mackerras.
-       URL: http://www.linux-mag.com/1999-07/gear_01.html
+       URL: http://www.linux-mag.com/id/261
        Keywords: Mac, Power Macintosh, porting, drivers, compatibility.
        Description: The title says it all.
 
      * Title: "An Introduction to SCSI Drivers"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-08/gear_01.html
+       URL: http://www.linux-mag.com/id/284
        Keywords: SCSI, device, driver.
        Description: The title says it all.
 
      * Title: "Advanced SCSI Drivers And Other Tales"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-09/gear_01.html
+       URL: http://www.linux-mag.com/id/307
        Keywords: SCSI, device, driver, advanced.
        Description: The title says it all.
 
      * Title: "Writing Linux Mouse Drivers"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-10/gear_01.html
+       URL: http://www.linux-mag.com/id/330
        Keywords: mouse, driver, gpm.
        Description: The title says it all.
 
      * Title: "More on Mouse Drivers"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-11/gear_01.html
+       URL: http://www.linux-mag.com/id/356
        Keywords: mouse, driver, gpm, races, asynchronous I/O.
        Description: The title still says it all.
 
      * Title: "Writing Video4linux Radio Driver"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-12/gear_01.html
+       URL: http://www.linux-mag.com/id/381
        Keywords: video4linux, driver, radio, radio devices.
        Description: The title says it all.
 
      * Title: "Video4linux Drivers, Part 1: Video-Capture Device"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/2000-01/gear_01.html
+       URL: http://www.linux-mag.com/id/406
        Keywords: video4linux, driver, video capture, capture devices,
        camera driver.
        Description: The title says it all.
 
      * Title: "Video4linux Drivers, Part 2: Video-capture Devices"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/2000-02/gear_01.html
+       URL: http://www.linux-mag.com/id/429
        Keywords: video4linux, driver, video capture, capture devices,
        camera driver, control, query capabilities, capability, facility.
        Description: The title says it all.
 
      * Title: "PCI Management in Linux 2.2"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/2000-03/gear_01.html
+       URL: http://www.linux-mag.com/id/452
        Keywords: PCI, bus, bus-mastering.
        Description: The title says it all.
 
@@ -502,7 +499,7 @@
        
      * Title: "A Linux vm README"
        Author: Kanoj Sarcar.
-       URL: http://reality.sgi.com/kanoj_engr/vm229.html
+       URL: http://kos.enix.org/pub/linux-vmm.html
        Keywords: virtual memory, mm, pgd, vma, page, page flags, page
        cache, swap cache, kswapd.
        Description: Telegraphic, short descriptions and definitions
@@ -659,7 +656,7 @@
 
      * Name: "Linux Kernel Source Reference"
        Author: Thomas Graichen.
-       URL: http://innominate.org/~graichen/projects/lksr/
+       URL: http://marc.info/?l=linux-kernel&m=96446640102205&w=4
        Keywords: CVS, web, cvsweb, browsing source code.
        Description: Web interface to a CVS server with the kernel
        sources. "Here you can have a look at any file of the Linux kernel
@@ -682,7 +679,7 @@
        produced during the week. Published every Thursday.
 
      * Name: "Kernel Traffic"
-       URL: http://kt.zork.net/kernel-traffic/
+       URL: http://kt.earth.li/kernel-traffic/index.html
        Keywords: linux-kernel mailing list, weekly kernel news.
        Description: Weekly newsletter covering the most relevant
        discussions of the linux-kernel mailing list.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 2b2407d9a6d0..ed45e9802aa8 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -43,10 +43,11 @@ parameter is applicable:
 	AVR32	AVR32 architecture is enabled.
 	AX25	Appropriate AX.25 support is enabled.
 	BLACKFIN Blackfin architecture is enabled.
-	DRM	Direct Rendering Management support is enabled.
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
 	EIDE	EIDE/ATAPI support is enabled.
+	DRM	Direct Rendering Management support is enabled.
+	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	FB	The frame buffer device is enabled.
 	GCOV	GCOV profiling is enabled.
 	HW	Appropriate hardware is enabled.
@@ -73,7 +74,6 @@ parameter is applicable:
 	MTD	MTD (Memory Technology Device) support is enabled.
 	NET	Appropriate network support is enabled.
 	NUMA	NUMA support is enabled.
-	GENERIC_TIME The generic timeofday code is enabled.
 	NFS	Appropriate NFS support is enabled.
 	OSS	OSS sound support is enabled.
 	PV_OPS	A paravirtualized kernel is enabled.
@@ -89,10 +89,11 @@ parameter is applicable:
 	RAM	RAM disk support is enabled.
 	S390	S390 architecture is enabled.
 	SCSI	Appropriate SCSI support is enabled.
-			A lot of drivers has their options described inside of
-			Documentation/scsi/.
+			A lot of drivers have their options described inside
+			the Documentation/scsi/ sub-directory.
 	SECURITY Different security models are enabled.
 	SELINUX SELinux support is enabled.
+	APPARMOR AppArmor support is enabled.
 	SERIAL	Serial support is enabled.
 	SH	SuperH architecture is enabled.
 	SMP	The kernel is an SMP kernel.
@@ -115,6 +116,7 @@ parameter is applicable:
 			More X86-64 boot options can be found in
 			Documentation/x86/x86_64/boot-options.txt .
 	X86	Either 32bit or 64bit x86 (same as X86-32+X86-64)
+	XEN	Xen support is enabled
 
 In addition, the following text indicates that the option:
 
@@ -280,36 +282,17 @@ and is between 256 and 4096 characters. It is defined in the file
 			no: ACPI OperationRegions are not marked as reserved,
 			no further checks are performed.
 
-	ad1848=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>,<type>
-
 	add_efi_memmap	[EFI; X86] Include EFI memory map in
 			kernel's map of available physical RAM.
 
-	advansys=	[HW,SCSI]
-			See header of drivers/scsi/advansys.c.
-
-	aedsp16=	[HW,OSS] Audio Excel DSP 16
-			Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
-			See also header of sound/oss/aedsp16.c.
-
 	agp=		[AGP]
 			{ off | try_unsupported }
 			off: disable AGP support
 			try_unsupported: try to drive unsupported chipsets
 				(may crash computer or cause data corruption)
 
-	aha152x=	[HW,SCSI]
-			See Documentation/scsi/aha152x.txt.
-
-	aha1542=	[HW,SCSI]
-			Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
-
-	aic7xxx=	[HW,SCSI]
-			See Documentation/scsi/aic7xxx.txt.
-
-	aic79xx=	[HW,SCSI]
-			See Documentation/scsi/aic79xx.txt.
+	ALSA		[HW,ALSA]
+			See Documentation/sound/alsa/alsa-parameters.txt
 
 	alignment=	[KNL,ARM]
 			Allow the default userspace alignment fault handler
@@ -371,8 +354,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	atarimouse=	[HW,MOUSE] Atari Mouse
 
-	atascsi=	[HW,SCSI] Atari SCSI
-
 	atkbd.extra=	[HW] Enable extra LEDs and keys on IBM RapidAccess,
 			EzKey and similar keyboards
 
@@ -422,10 +403,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	bttv.pll=	See Documentation/video4linux/bttv/Insmod-options
 	bttv.tuner=	and Documentation/video4linux/bttv/CARDLIST
 
-	BusLogic=	[HW,SCSI]
-			See drivers/scsi/BusLogic.c, comment before function
-			BusLogic_ParseDriverOptions().
-
 	c101=		[NET] Moxa C101 synchronous serial card
 
 	cachesize=	[BUGS=X86-32] Override level 2 CPU cache size detection.
@@ -468,7 +445,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			clocksource is not available, it defaults to PIT.
 			Format: { pit | tsc | cyclone | pmtmr }
 
-	clocksource=	[GENERIC_TIME] Override the default clocksource
+	clocksource=	Override the default clocksource
 			Format: <string>
 			Override the default clocksource and use the clocksource
 			with the name specified.
@@ -479,7 +456,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			[ARM] imx_timer1,OSTS,netx_timer,mpu_timer2,
 				pxa_timer,timer3,32k_counter,timer0_1
 			[AVR32] avr32
-			[X86-32] pit,hpet,tsc,vmi-timer;
+			[X86-32] pit,hpet,tsc;
 				scx200_hrt on Geode; cyclone on IBM x440
 			[MIPS] MIPS
 			[PARISC] cr16
@@ -594,6 +571,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: <port#>,<type>
 			See also Documentation/input/joystick-parport.txt
 
+	ddebug_query=   [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
+			time. See Documentation/dynamic-debug-howto.txt for
+			details.
+
 	debug		[KNL] Enable kernel debugging (events log level).
 
 	debug_locks_verbose=
@@ -655,8 +636,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Disable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs.
 
-	dmasound=	[HW,OSS] Sound subsystem buffers
-
 	dma_debug=off	If the kernel is compiled with DMA_API_DEBUG support,
 			this option disables the debugging code at boot.
 
@@ -676,8 +655,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	dscc4.setup=	[NET]
 
-	dtc3181e=	[HW,SCSI]
-
 	dynamic_printk	Enables pr_debug()/dev_dbg() calls if
 			CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
 			These can also be switched on/off via
@@ -686,8 +663,11 @@ and is between 256 and 4096 characters. It is defined in the file
 	earlycon=	[KNL] Output early console device and options.
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
+		uart[8250],mmio32,<addr>[,options]
 			Start an early, polled-mode console on the 8250/16550
 			UART at the specified I/O port or MMIO address.
+			MMIO inter-register address stride is either 8bit (mmio)
+                        or 32bit (mmio32).
 			The options are the same as for ttyS, above.
 
 	earlyprintk=	[X86,SH,BLACKFIN]
@@ -715,8 +695,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			This is desgined to be used in conjunction with
 			the boot argument: earlyprintk=vga
 
-	eata=		[HW,SCSI]
-
 	edd=		[EDD]
 			Format: {"off" | "on" | "skip[mbr]"}
 
@@ -772,12 +750,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: <interval>,<probability>,<space>,<times>
 			See also /Documentation/fault-injection/.
 
-	fd_mcs=		[HW,SCSI]
-			See header of drivers/scsi/fd_mcs.c.
-
-	fdomain=	[HW,SCSI]
-			See header of drivers/scsi/fdomain.c.
-
 	floppy=		[HW]
 			See Documentation/blockdev/floppy.txt.
 
@@ -837,14 +809,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			When zero, profiling data is discarded and associated
 			debugfs files are removed at module unload time.
 
-	gdth=		[HW,SCSI]
-			See header of drivers/scsi/gdth.c.
-
 	gpt		[EFI] Forces disk with valid GPT signature but
 			invalid Protective MBR to be treated as GPT.
 
-	gvp11=		[HW,SCSI]
-
 	hashdist=	[KNL,NUMA] Large hashes allocated during boot
 			are distributed across NUMA nodes.  Defaults on
 			for 64bit NUMA, off otherwise.
@@ -917,9 +884,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			     controller
 	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
 			     controllers
-	i8042.panicblink=
-			[HW] Frequency with which keyboard LEDs should blink
-			     when kernel panics (default is 0.5 sec)
 	i8042.reset	[HW] Reset the controller during init and cleanup
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 
@@ -936,9 +900,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	i8k.restricted	[HW] Allow controlling fans only if SYS_ADMIN
 			capability is set.
 
-	ibmmcascsi=	[HW,MCA,SCSI] IBM MicroChannel SCSI adapter
-			See Documentation/mca.txt.
-
 	icn=		[HW,ISDN]
 			Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
 
@@ -988,9 +949,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			programs exec'd, files mmap'd for exec, and all files
 			opened for read by uid=0.
 
-	in2000=		[HW,SCSI]
-			See header of drivers/scsi/in2000.c.
-
 	init=		[KNL]
 			Format: <full_path>
 			Run specified binary instead of /sbin/init as init
@@ -1028,6 +986,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			result in a hardware IOTLB flush operation as opposed
 			to batching them for performance.
 
+	intremap=	[X86-64, Intel-IOMMU]
+			Format: { on (default) | off | nosid }
+			on	enable Interrupt Remapping (default)
+			off	disable Interrupt Remapping
+			nosid	disable Source ID checking
+
 	inttest=	[IA64]
 
 	iomem=		Disable strict checking of access to MMIO memory
@@ -1068,9 +1032,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			See comment before ip2_setup() in
 			drivers/char/ip2/ip2base.c.
 
-	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller
-			See header of drivers/scsi/ips.c.
-
 	irqfixup	[HW]
 			When an interrupt is not handled search all handlers
 			for it. Intended to get systems with badly broken
@@ -1143,9 +1104,12 @@ and is between 256 and 4096 characters. It is defined in the file
 	kgdboc=		[KGDB,HW] kgdb over consoles.
 			Requires a tty driver that supports console polling,
 			or a supported polling keyboard driver (non-usb).
-			Serial only format: <serial_device>[,baud]
-			keyboard only format: kbd
-			keyboard and serial format: kbd,<serial_device>[,baud]
+			 Serial only format: <serial_device>[,baud]
+			 keyboard only format: kbd
+			 keyboard and serial format: kbd,<serial_device>[,baud]
+			Optional Kernel mode setting:
+			 kms, kbd format: kms,kbd
+			 kms, kbd and serial format: kms,kbd,<ser_dev>[,baud]
 
 	kgdbwait	[KGDB] Stop kernel execution and enter the
 			kernel debugger at the earliest opportunity.
@@ -1167,9 +1131,13 @@ and is between 256 and 4096 characters. It is defined in the file
 	kvm.oos_shadow=	[KVM] Disable out-of-sync shadow paging.
 			Default is 1 (enabled)
 
-	kvm-amd.nested=	[KVM,AMD] Allow nested virtualization in KVM/SVM.
+	kvm.mmu_audit=	[KVM] This is a R/W parameter which allows audit
+			KVM MMU at runtime.
 			Default is 0 (off)
 
+	kvm-amd.nested=	[KVM,AMD] Allow nested virtualization in KVM/SVM.
+			Default is 1 (enabled)
+
 	kvm-amd.npt=	[KVM,AMD] Disable nested paging (virtualized MMU)
 			for all guests.
 			Default is 1 (enabled) if in 64bit or 32bit-PAE mode
@@ -1343,9 +1311,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	ltpc=		[NET]
 			Format: <io>,<irq>,<dma>
 
-	mac5380=	[HW,SCSI] Format:
-			<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
-
 	machvec=	[IA64] Force the use of a particular machine-vector
 			(machvec) in a generic kernel.
 			Example: machvec=hpzx1_swiotlb
@@ -1367,13 +1332,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			be mounted
 			Format: <1-256>
 
-	max_luns=	[SCSI] Maximum number of LUNs to probe.
-			Should be between 1 and 2^32-1.
-
-	max_report_luns=
-			[SCSI] Maximum number of LUNs received.
-			Should be between 1 and 16384.
-
 	mcatest=	[IA-64]
 
 	mce		[X86-32] Machine Check Exception
@@ -1523,9 +1481,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			that the amount of memory usable for all allocations
 			is not too small.
 
-	mpu401=		[HW,OSS]
-			Format: <io>,<irq>
-
 	MTD_Partition=	[MTD]
 			Format: <name>,<region-number>,<size>,<offset>
 
@@ -1573,19 +1528,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	n2=		[NET] SDL Inc. RISCom/N2 synchronous serial card
 
-	NCR_D700=	[HW,SCSI]
-			See header of drivers/scsi/NCR_D700.c.
-
-	ncr5380=	[HW,SCSI]
-
-	ncr53c400=	[HW,SCSI]
-
-	ncr53c400a=	[HW,SCSI]
-
-	ncr53c406a=	[HW,SCSI]
-
-	ncr53c8xx=	[HW,SCSI]
-
 	netdev=		[NET] Network devices parameters
 			Format: <irq>,<io>,<mem_start>,<mem_end>,<name>
 			Note that mem_start is often overloaded to mean
@@ -1597,15 +1539,17 @@ and is between 256 and 4096 characters. It is defined in the file
 			[NETFILTER] Enable connection tracking flow accounting
 			0 to disable accounting
 			1 to enable accounting
-			Default value depends on CONFIG_NF_CT_ACCT that is
-			going to be removed in 2.6.29.
+			Default value is 0.
 
-	nfsaddrs=	[NFS]
+	nfsaddrs=	[NFS] Deprecated.  Use ip= instead.
 			See Documentation/filesystems/nfs/nfsroot.txt.
 
 	nfsroot=	[NFS] nfs root filesystem for disk-less boxes.
 			See Documentation/filesystems/nfs/nfsroot.txt.
 
+	nfsrootdebug	[NFS] enable nfsroot debugging messages.
+			See Documentation/filesystems/nfs/nfsroot.txt.
+
 	nfs.callback_tcpport=
 			[NFS] set the TCP port on which the NFSv4 callback
 			channel should listen.
@@ -1755,11 +1699,14 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nointremap	[X86-64, Intel-IOMMU] Do not enable interrupt
 			remapping.
+			[Deprecated - use intremap=off]
 
 	nointroute	[IA-64]
 
 	nojitter	[IA64] Disables jitter checking for ITC timers.
 
+	no-kvmclock	[X86,KVM] Disable paravirtualized KVM clock driver
+
 	nolapic		[X86-32,APIC] Do not enable or use the local APIC.
 
 	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.
@@ -1780,7 +1727,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	norandmaps	Don't use address space randomization.  Equivalent to
 			echo 0 > /proc/sys/kernel/randomize_va_space
 
-	noreplace-paravirt	[X86-32,PV_OPS] Don't patch paravirt_ops
+	noreplace-paravirt	[X86,IA-64,PV_OPS] Don't patch paravirt_ops
 
 	noreplace-smp	[X86-32,SMP] Don't replace SMP instructions
 			with UP alternatives
@@ -1812,6 +1759,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nousb		[USB] Disable the USB subsystem
 
+	nowatchdog	[KNL] Disable the lockup detector.
+
 	nowb		[ARM]
 
 	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
@@ -1849,9 +1798,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			For example, to override I2C bus2:
 			omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
 
-	opl3=		[HW,OSS]
-			Format: <io>
-
 	oprofile.timer=	[HW]
 			Use timer interrupt instead of performance counters
 
@@ -1863,9 +1809,8 @@ and is between 256 and 4096 characters. It is defined in the file
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
 
-	osst=		[HW,SCSI] SCSI Tape Driver
-			Format: <buffer_size>,<write_threshold>
-			See also Documentation/scsi/st.txt.
+	OSS		[HW,OSS]
+			See Documentation/sound/oss/oss-parameters.txt
 
 	panic=		[KNL] Kernel behaviour on panic
 			Format: <timeout>
@@ -1899,12 +1844,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Currently this function knows 686a and 8231 chips.
 			Format: [spp|ps2|epp|ecp|ecpepp]
 
-	pas2=		[HW,OSS] Format:
-			<io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
-
-	pas16=		[HW,SCSI]
-			See header of drivers/scsi/pas16.c.
-
 	pause_on_oops=
 			Halt all CPUs after the first oops has been printed for
 			the specified number of seconds.  This is to be used if
@@ -1970,6 +1909,8 @@ and is between 256 and 4096 characters. It is defined in the file
 		norom		[X86] Do not assign address space to
 				expansion ROMs that do not already have
 				BIOS assigned address ranges.
+		nobar		[X86] Do not assign address space to the
+				BARs that weren't assigned by the BIOS.
 		irqmask=0xMMMM	[X86] Set a bit mask of IRQs allowed to be
 				assigned automatically to PCI devices. You can
 				make the kernel exclude IRQs of your ISA cards
@@ -2047,15 +1988,18 @@ and is between 256 and 4096 characters. It is defined in the file
 		force	Enable ASPM even on devices that claim not to support it.
 			WARNING: Forcing ASPM on may cause system lockups.
 
+	pcie_ports=	[PCIE] PCIe ports handling:
+		auto	Ask the BIOS whether or not to use native PCIe services
+			associated with PCIe ports (PME, hot-plug, AER).  Use
+			them only if that is allowed by the BIOS.
+		native	Use native PCIe services associated with PCIe ports
+			unconditionally.
+		compat	Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
+			ports driver.
+
 	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
-			Format: {auto|force}[,nomsi]
-		auto	Use native PCIe PME signaling if the BIOS allows the
-			kernel to control PCIe config registers of root ports.
-		force	Use native PCIe PME signaling even if the BIOS refuses
-			to allow the kernel to control the relevant PCIe config
-			registers.
 		nomsi	Do not use MSI for native PCIe PME signaling (this makes
-			all PCIe root ports use INTx for everything).
+			all PCIe root ports use INTx for all services).
 
 	pcmv=		[HW,PCMCIA] BadgePAD 4
 
@@ -2171,10 +2115,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			[HW,MOUSE] Controls Logitech smartscroll autorepeat.
 			0 = disabled, 1 = enabled (default).
 
-	pss=		[HW,OSS] Personal Sound System (ECHO ESC614)
-			Format:
-			<io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
-
 	pt.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
@@ -2227,9 +2167,19 @@ and is between 256 and 4096 characters. It is defined in the file
 			Reserves a hole at the top of the kernel virtual
 			address space.
 
+	reservelow=	[X86]
+			Format: nn[K]
+			Set the amount of memory to reserve for BIOS at
+			the bottom of the address space.
+
 	reset_devices	[KNL] Force drivers to reset the underlying device
 			during initialization.
 
+	resource_alloc_from_bottom
+			Allocate new resources from the beginning of available
+			space, not the end.  If you need to use this, please
+			report a bug.
+
 	resume=		[SWSUSP]
 			Specify the partition device for software suspend
 
@@ -2239,6 +2189,11 @@ and is between 256 and 4096 characters. It is defined in the file
 			in <PAGE_SIZE> units (needed only for swap files).
 			See  Documentation/power/swsusp-and-swap-files.txt
 
+	hibernate=	[HIBERNATION]
+		noresume	Don't check if there's a hibernation image
+				present during boot.
+		nocompress	Don't compress/decompress hibernation images.
+
 	retain_initrd	[RAM] Keep initrd memory after extraction
 
 	rhash_entries=	[KNL,NET]
@@ -2273,30 +2228,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	sched_debug	[KNL] Enables verbose scheduler debug messages.
 
-	scsi_debug_*=	[SCSI]
-			See drivers/scsi/scsi_debug.c.
-
-	scsi_default_dev_flags=
-			[SCSI] SCSI default device flags
-			Format: <integer>
-
-	scsi_dev_flags=	[SCSI] Black/white list entry for vendor and model
-			Format: <vendor>:<model>:<flags>
-			(flags are integer value)
-
-	scsi_logging_level=	[SCSI] a bit mask of logging levels
-			See drivers/scsi/scsi_logging.h for bits.  Also
-			settable via sysctl at dev.scsi.logging_level
-			(/proc/sys/dev/scsi/logging_level).
-			There is also a nice 'scsi_logging_level' script in the
-			S390-tools package, available for download at
-			http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
-
-	scsi_mod.scan=	[SCSI] sync (default) scans SCSI busses as they are
-			discovered.  async scans them in kernel threads,
-			allowing boot to proceed.  none ignores them, expecting
-			user space to do the scan.
-
 	security=	[SECURITY] Choose a security module to enable at boot.
 			If this boot parameter is not specified, only the first
 			security module asking for security registration will be
@@ -2312,6 +2243,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			If enabled at boot time, /selinux/disable can be used
 			later to disable prior to initial policy load.
 
+	apparmor=	[APPARMOR] Disable or enable AppArmor at boot time
+			Format: { "0" | "1" }
+			See security/apparmor/Kconfig help text
+			0 -- disable.
+			1 -- enable.
+			Default value is set via kernel config option.
+
 	serialnumber	[BUGS=X86-32]
 
 	shapers=	[NET]
@@ -2323,9 +2261,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			The parameter means the number of CPUs to show,
 			for example 1 means boot CPU only.
 
-	sim710=		[SCSI,HW]
-			See header of drivers/scsi/sim710.c.
-
 	simeth=		[IA-64]
 	simscsi=
 
@@ -2383,128 +2318,6 @@ and is between 256 and 4096 characters. It is defined in the file
 				1: Fast pin select (default)
 				2: ATC IRMode
 
-	snd-ad1816a=	[HW,ALSA]
-
-	snd-ad1848=	[HW,ALSA]
-
-	snd-ali5451=	[HW,ALSA]
-
-	snd-als100=	[HW,ALSA]
-
-	snd-als4000=	[HW,ALSA]
-
-	snd-azt2320=	[HW,ALSA]
-
-	snd-cmi8330=	[HW,ALSA]
-
-	snd-cmipci=	[HW,ALSA]
-
-	snd-cs4231=	[HW,ALSA]
-
-	snd-cs4232=	[HW,ALSA]
-
-	snd-cs4236=	[HW,ALSA]
-
-	snd-cs4281=	[HW,ALSA]
-
-	snd-cs46xx=	[HW,ALSA]
-
-	snd-dt019x=	[HW,ALSA]
-
-	snd-dummy=	[HW,ALSA]
-
-	snd-emu10k1=	[HW,ALSA]
-
-	snd-ens1370=	[HW,ALSA]
-
-	snd-ens1371=	[HW,ALSA]
-
-	snd-es968=	[HW,ALSA]
-
-	snd-es1688=	[HW,ALSA]
-
-	snd-es18xx=	[HW,ALSA]
-
-	snd-es1938=	[HW,ALSA]
-
-	snd-es1968=	[HW,ALSA]
-
-	snd-fm801=	[HW,ALSA]
-
-	snd-gusclassic=	[HW,ALSA]
-
-	snd-gusextreme=	[HW,ALSA]
-
-	snd-gusmax=	[HW,ALSA]
-
-	snd-hdsp=	[HW,ALSA]
-
-	snd-ice1712=	[HW,ALSA]
-
-	snd-intel8x0=	[HW,ALSA]
-
-	snd-interwave=	[HW,ALSA]
-
-	snd-interwave-stb=
-			[HW,ALSA]
-
-	snd-korg1212=	[HW,ALSA]
-
-	snd-maestro3=	[HW,ALSA]
-
-	snd-mpu401=	[HW,ALSA]
-
-	snd-mtpav=	[HW,ALSA]
-
-	snd-nm256=	[HW,ALSA]
-
-	snd-opl3sa2=	[HW,ALSA]
-
-	snd-opti92x-ad1848=
-			[HW,ALSA]
-
-	snd-opti92x-cs4231=
-			[HW,ALSA]
-
-	snd-opti93x=	[HW,ALSA]
-
-	snd-pmac=	[HW,ALSA]
-
-	snd-rme32=	[HW,ALSA]
-
-	snd-rme96=	[HW,ALSA]
-
-	snd-rme9652=	[HW,ALSA]
-
-	snd-sb8=	[HW,ALSA]
-
-	snd-sb16=	[HW,ALSA]
-
-	snd-sbawe=	[HW,ALSA]
-
-	snd-serial=	[HW,ALSA]
-
-	snd-sgalaxy=	[HW,ALSA]
-
-	snd-sonicvibes=	[HW,ALSA]
-
-	snd-sun-amd7930=
-			[HW,ALSA]
-
-	snd-sun-cs4231=	[HW,ALSA]
-
-	snd-trident=	[HW,ALSA]
-
-	snd-usb-audio=	[HW,ALSA,USB]
-
-	snd-via82xx=	[HW,ALSA]
-
-	snd-virmidi=	[HW,ALSA]
-
-	snd-wavefront=	[HW,ALSA]
-
-	snd-ymfpci=	[HW,ALSA]
-
 	softlockup_panic=
 			[KNL] Should the soft-lockup detector generate panics.
 
@@ -2519,12 +2332,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	spia_pedr=
 	spia_peddr=
 
-	sscape=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
-
-	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
-			See Documentation/scsi/st.txt.
-
 	stacktrace	[FTRACE]
 			Enabled the stack tracer on boot up.
 
@@ -2582,8 +2389,14 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	switches=	[HW,M68k]
 
-	sym53c416=	[HW,SCSI]
-			See header of drivers/scsi/sym53c416.c.
+	sysfs.deprecated=0|1 [KNL]
+			Enable/disable old style sysfs layout for old udev
+			on older distributions. When this option is enabled
+			very new udev will not work anymore. When this option
+			is disabled (or CONFIG_SYSFS_DEPRECATED not compiled)
+			in older udev will not work anymore.
+			Default depends on CONFIG_SYSFS_DEPRECATED_V2 set in
+			the kernel configuration.
 
 	sysrq_always_enabled
 			[KNL]
@@ -2591,9 +2404,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			neutralize any effect of /proc/sys/kernel/sysrq.
 			Useful for debugging.
 
-	t128=		[HW,SCSI]
-			See header of drivers/scsi/t128.c.
-
 	tdfx=		[HW,DRM]
 
 	test_suspend=	[SUSPEND]
@@ -2630,17 +2440,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			<deci-seconds>: poll all this frequency
 			0: no polling (default)
 
-	tmscsim=	[HW,SCSI]
-			See comment before function dc390_setup() in
-			drivers/scsi/tmscsim.c.
-
 	topology=	[S390]
 			Format: {off | on}
 			Specify if the kernel should make use of the cpu
 			topology informations if the hardware supports these.
 			The scheduler will make use of these informations and
 			e.g. base its process migration decisions on it.
-			Default is off.
+			Default is on.
 
 	tp720=		[HW,PS2]
 
@@ -2661,16 +2467,16 @@ and is between 256 and 4096 characters. It is defined in the file
 			to facilitate early boot debugging.
 			See also Documentation/trace/events.txt
 
-	trix=		[HW,OSS] MediaTrix AudioTrix Pro
-			Format:
-			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
-
 	tsc=		Disable clocksource-must-verify flag for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
 			disables clocksource verification at runtime.
 			Used to enable high-resolution timer mode on older
 			hardware, and in virtualized environment.
+			[x86] noirqtime: Do not use TSC to do irq accounting.
+			Used to run time disable IRQ_TIME_ACCOUNTING on any
+			platforms where RDTSC is slow and this accounting
+			can add overhead.
 
 	turbografx.map[2|3]=	[HW,JOY]
 			TurboGraFX parallel port interface
@@ -2678,15 +2484,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			<port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
 			See also Documentation/input/joystick-parport.txt
 
-	u14-34f=	[HW,SCSI] UltraStor 14F/34F SCSI host adapter
-			See header of drivers/scsi/u14-34f.c.
-
-	uart401=	[HW,OSS]
-			Format: <io>,<irq>
-
-	uart6850=	[HW,OSS]
-			Format: <io>,<irq>
-
 	uhash_entries=	[KNL,NET]
 			Set number of hash buckets for UDP/UDP-Lite connections
 
@@ -2852,15 +2649,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			overridden by individual drivers. 0 will hide
 			cursors, 1 will display them.
 
-	waveartist=	[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>
-
-	wd33c93=	[HW,SCSI]
-			See header of drivers/scsi/wd33c93.c.
-
-	wd7000=		[HW,SCSI]
-			See header of drivers/scsi/wd7000.c.
-
 	watchdog timers	[HW,WDT] For information on watchdog timers,
 			see Documentation/watchdog/watchdog-parameters.txt
 			or other driver-specific files in the
@@ -2879,6 +2667,18 @@ and is between 256 and 4096 characters. It is defined in the file
 	xd=		[HW,XT] Original XT pre-IDE (RLL encoded) disks.
 	xd_geo=		See header of drivers/block/xd.c.
 
+	xen_emul_unplug=		[HW,X86,XEN]
+			Unplug Xen emulated devices
+			Format: [unplug0,][unplug1]
+			ide-disks -- unplug primary master IDE devices
+			aux-ide-disks -- unplug non-primary-master IDE devices
+			nics -- unplug network devices
+			all -- unplug all emulated devices (NICs and IDE disks)
+			unnecessary -- unplugging emulated devices is
+				unnecessary even if the host did not respond to
+				the unplug protocol
+			never -- do not unplug even if version check succeeds
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
@@ -2887,5 +2687,4 @@ ______________________________________________________________________
 
 TODO:
 
-	Add documentation for ALSA options.
 	Add more DRM drivers.
diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO
index 029fca914c05..e3a55b6091e9 100644
--- a/Documentation/ko_KR/HOWTO
+++ b/Documentation/ko_KR/HOWTO
@@ -122,7 +122,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다.
 
     올바른 패치들을 만드는 법에 관한 훌륭한 다른 문서들이 있다.
     "The Perfect Patch"
-        http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+        http://userweb.kernel.org/~akpm/stuff/tpp.txt
     "Linux kernel patch submission format"
         http://linux.yyz.us/patch-format.html
 
@@ -192,7 +192,7 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H
 
 여러분이 어디서 시작해야 할진 모르지만 커널 개발 커뮤니티에 참여할 수
 있는 일들을 찾길 원한다면 리눅스 커널 Janitor 프로젝트를 살펴봐라.
-         http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors
 그곳은 시작하기에 훌륭한 장소이다. 그곳은 리눅스 커널 소스 트리내에
 간단히 정리되고 수정될 수 있는 문제들에 관하여 설명한다. 여러분은 이
 프로젝트를 대표하는 개발자들과 일하면서 자신의 패치를 리눅스 커널 트리에
@@ -596,7 +596,7 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅�
 
 이것이 무엇인지 더 자세한 것을 알고 싶다면 다음 문서의 ChageLog 항을 봐라.
    "The Perfect Patch"
-    http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+    http://userweb.kernel.org/~akpm/stuff/tpp.txt
 
 
 
@@ -610,7 +610,7 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅�
 
 
 ----------
-"개발 프로세스"(http://linux.tar.gz/articles/2.6-development_process) 섹션을
+"개발 프로세스"(http://lwn.net/Articles/94386/) 섹션을
 작성하는데 있어 참고할 문서를 사용하도록 허락해준 Paolo Ciarrocchi에게
 감사한다. 여러분들이 말해야 할 것과 말해서는 안되는 것의 목록 중 일부를 제공해준
 Randy Dunlap과 Gerrit Huizenga에게 감사한다. 또한 검토와 의견 그리고
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 6653017680dd..741fe66d6eca 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -285,6 +285,7 @@ architectures:
 - sparc64 (Return probes not yet implemented.)
 - arm
 - ppc
+- mips
 
 3. Configuring Kprobes
 
@@ -541,9 +542,11 @@ Kprobes does not use mutexes or allocate memory except during
 registration and unregistration.
 
 Probe handlers are run with preemption disabled.  Depending on the
-architecture, handlers may also run with interrupts disabled.  In any
-case, your handler should not yield the CPU (e.g., by attempting to
-acquire a semaphore).
+architecture and optimization state, handlers may also run with
+interrupts disabled (e.g., kretprobe handlers and optimized kprobe
+handlers run without interrupt disabled on x86/x86-64).  In any case,
+your handler should not yield the CPU (e.g., by attempting to acquire
+a semaphore).
 
 Since a return probe is implemented by replacing the return
 address with the trampoline's address, stack backtraces and calls
diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index a237518e51b9..b336266bea5e 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -126,6 +126,10 @@ user fills in the size of the indices array in nmsrs, and in return
 kvm adjusts nmsrs to reflect the actual number of msrs and fills in
 the indices array with their numbers.
 
+Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
+not returned in the MSR list, as different vcpus can have a different number
+of banks, as set via the KVM_X86_SETUP_MCE ioctl.
+
 4.4 KVM_CHECK_EXTENSION
 
 Capability: basic
@@ -160,29 +164,7 @@ Type: vm ioctl
 Parameters: struct kvm_memory_region (in)
 Returns: 0 on success, -1 on error
 
-struct kvm_memory_region {
-	__u32 slot;
-	__u32 flags;
-	__u64 guest_phys_addr;
-	__u64 memory_size; /* bytes */
-};
-
-/* for kvm_memory_region::flags */
-#define KVM_MEM_LOG_DIRTY_PAGES  1UL
-
-This ioctl allows the user to create or modify a guest physical memory
-slot.  When changing an existing slot, it may be moved in the guest
-physical memory space, or its flags may be modified.  It may not be
-resized.  Slots may not overlap.
-
-The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which
-instructs kvm to keep track of writes to memory within the slot.  See
-the KVM_GET_DIRTY_LOG ioctl.
-
-It is recommended to use the KVM_SET_USER_MEMORY_REGION ioctl instead
-of this API, if available.  This newer API allows placing guest memory
-at specified locations in the host address space, yielding better
-control and easy access.
+This ioctl is obsolete and has been removed.
 
 4.6 KVM_CREATE_VCPU
 
@@ -226,17 +208,7 @@ Type: vm ioctl
 Parameters: struct kvm_memory_alias (in)
 Returns: 0 (success), -1 (error)
 
-struct kvm_memory_alias {
-	__u32 slot;  /* this has a different namespace than memory slots */
-	__u32 flags;
-	__u64 guest_phys_addr;
-	__u64 memory_size;
-	__u64 target_phys_addr;
-};
-
-Defines a guest physical address space region as an alias to another
-region.  Useful for aliased address, for example the VGA low memory
-window. Should not be used with userspace memory.
+This ioctl is obsolete and has been removed.
 
 4.9 KVM_RUN
 
@@ -348,13 +320,13 @@ struct kvm_translation {
 4.15 KVM_INTERRUPT
 
 Capability: basic
-Architectures: x86
+Architectures: x86, ppc
 Type: vcpu ioctl
 Parameters: struct kvm_interrupt (in)
 Returns: 0 on success, -1 on error
 
 Queues a hardware interrupt vector to be injected.  This is only
-useful if in-kernel local APIC is not used.
+useful if in-kernel local APIC or equivalent is not used.
 
 /* for KVM_INTERRUPT */
 struct kvm_interrupt {
@@ -362,8 +334,37 @@ struct kvm_interrupt {
 	__u32 irq;
 };
 
+X86:
+
 Note 'irq' is an interrupt vector, not an interrupt pin or line.
 
+PPC:
+
+Queues an external interrupt to be injected. This ioctl is overleaded
+with 3 different irq values:
+
+a) KVM_INTERRUPT_SET
+
+  This injects an edge type external interrupt into the guest once it's ready
+  to receive interrupts. When injected, the interrupt is done.
+
+b) KVM_INTERRUPT_UNSET
+
+  This unsets any pending interrupt.
+
+  Only available with KVM_CAP_PPC_UNSET_IRQ.
+
+c) KVM_INTERRUPT_SET_LEVEL
+
+  This injects a level type external interrupt into the guest context. The
+  interrupt stays pending until a specific ioctl with KVM_INTERRUPT_UNSET
+  is triggered.
+
+  Only available with KVM_CAP_PPC_IRQ_LEVEL.
+
+Note that any value for 'irq' other than the ones stated above is invalid
+and incurs unexpected behavior.
+
 4.16 KVM_DEBUG_GUEST
 
 Capability: basic
@@ -892,6 +893,198 @@ arguments.
 This ioctl is only useful after KVM_CREATE_IRQCHIP.  Without an in-kernel
 irqchip, the multiprocessing state must be maintained by userspace.
 
+4.39 KVM_SET_IDENTITY_MAP_ADDR
+
+Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long identity (in)
+Returns: 0 on success, -1 on error
+
+This ioctl defines the physical address of a one-page region in the guest
+physical address space.  The region must be within the first 4GB of the
+guest physical address space and must not conflict with any memory slot
+or any mmio address.  The guest may malfunction if it accesses this memory
+region.
+
+This ioctl is required on Intel-based hosts.  This is needed on Intel hardware
+because of a quirk in the virtualization implementation (see the internals
+documentation when it pops into existence).
+
+4.40 KVM_SET_BOOT_CPU_ID
+
+Capability: KVM_CAP_SET_BOOT_CPU_ID
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: unsigned long vcpu_id
+Returns: 0 on success, -1 on error
+
+Define which vcpu is the Bootstrap Processor (BSP).  Values are the same
+as the vcpu id in KVM_CREATE_VCPU.  If this ioctl is not called, the default
+is vcpu 0.
+
+4.41 KVM_GET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+	__u32 region[1024];
+};
+
+This ioctl would copy current vcpu's xsave struct to the userspace.
+
+4.42 KVM_SET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+	__u32 region[1024];
+};
+
+This ioctl would copy userspace's xsave struct to the kernel.
+
+4.43 KVM_GET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+	__u32 xcr;
+	__u32 reserved;
+	__u64 value;
+};
+
+struct kvm_xcrs {
+	__u32 nr_xcrs;
+	__u32 flags;
+	struct kvm_xcr xcrs[KVM_MAX_XCRS];
+	__u64 padding[16];
+};
+
+This ioctl would copy current vcpu's xcrs to the userspace.
+
+4.44 KVM_SET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+	__u32 xcr;
+	__u32 reserved;
+	__u64 value;
+};
+
+struct kvm_xcrs {
+	__u32 nr_xcrs;
+	__u32 flags;
+	struct kvm_xcr xcrs[KVM_MAX_XCRS];
+	__u64 padding[16];
+};
+
+This ioctl would set vcpu's xcr to the value userspace specified.
+
+4.45 KVM_GET_SUPPORTED_CPUID
+
+Capability: KVM_CAP_EXT_CPUID
+Architectures: x86
+Type: system ioctl
+Parameters: struct kvm_cpuid2 (in/out)
+Returns: 0 on success, -1 on error
+
+struct kvm_cpuid2 {
+	__u32 nent;
+	__u32 padding;
+	struct kvm_cpuid_entry2 entries[0];
+};
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX 1
+#define KVM_CPUID_FLAG_STATEFUL_FUNC    2
+#define KVM_CPUID_FLAG_STATE_READ_NEXT  4
+
+struct kvm_cpuid_entry2 {
+	__u32 function;
+	__u32 index;
+	__u32 flags;
+	__u32 eax;
+	__u32 ebx;
+	__u32 ecx;
+	__u32 edx;
+	__u32 padding[3];
+};
+
+This ioctl returns x86 cpuid features which are supported by both the hardware
+and kvm.  Userspace can use the information returned by this ioctl to
+construct cpuid information (for KVM_SET_CPUID2) that is consistent with
+hardware, kernel, and userspace capabilities, and with user requirements (for
+example, the user may wish to constrain cpuid to emulate older hardware,
+or for feature consistency across a cluster).
+
+Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure
+with the 'nent' field indicating the number of entries in the variable-size
+array 'entries'.  If the number of entries is too low to describe the cpu
+capabilities, an error (E2BIG) is returned.  If the number is too high,
+the 'nent' field is adjusted and an error (ENOMEM) is returned.  If the
+number is just right, the 'nent' field is adjusted to the number of valid
+entries in the 'entries' array, which is then filled.
+
+The entries returned are the host cpuid as returned by the cpuid instruction,
+with unknown or unsupported features masked out.  Some features (for example,
+x2apic), may not be present in the host cpu, but are exposed by kvm if it can
+emulate them efficiently. The fields in each entry are defined as follows:
+
+  function: the eax value used to obtain the entry
+  index: the ecx value used to obtain the entry (for entries that are
+         affected by ecx)
+  flags: an OR of zero or more of the following:
+        KVM_CPUID_FLAG_SIGNIFCANT_INDEX:
+           if the index field is valid
+        KVM_CPUID_FLAG_STATEFUL_FUNC:
+           if cpuid for this function returns different values for successive
+           invocations; there will be several entries with the same function,
+           all with this flag set
+        KVM_CPUID_FLAG_STATE_READ_NEXT:
+           for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is
+           the first entry to be read by a cpu
+   eax, ebx, ecx, edx: the values returned by the cpuid instruction for
+         this function/index combination
+
+4.46 KVM_PPC_GET_PVINFO
+
+Capability: KVM_CAP_PPC_GET_PVINFO
+Architectures: ppc
+Type: vm ioctl
+Parameters: struct kvm_ppc_pvinfo (out)
+Returns: 0 on success, !0 on error
+
+struct kvm_ppc_pvinfo {
+	__u32 flags;
+	__u32 hcall[4];
+	__u8  pad[108];
+};
+
+This ioctl fetches PV specific information that need to be passed to the guest
+using the device tree or other means from vm context.
+
+For now the only implemented piece of information distributed here is an array
+of 4 instructions that make up a hypercall.
+
+If any additional field gets added to this structure later on, a bit for that
+additional piece of information will be set in the flags bitmap.
+
 5. The kvm_run structure
 
 Application code obtains a pointer to the kvm_run structure by
diff --git a/Documentation/kvm/mmu.txt b/Documentation/kvm/mmu.txt
index aaed6ab9d7ab..142cc5136650 100644
--- a/Documentation/kvm/mmu.txt
+++ b/Documentation/kvm/mmu.txt
@@ -77,10 +77,10 @@ Memory
 
 Guest memory (gpa) is part of the user address space of the process that is
 using kvm.  Userspace defines the translation between guest addresses and user
-addresses (gpa->hva); note that two gpas may alias to the same gva, but not
+addresses (gpa->hva); note that two gpas may alias to the same hva, but not
 vice versa.
 
-These gvas may be backed using any method available to the host: anonymous
+These hvas may be backed using any method available to the host: anonymous
 memory, file backed memory, and device memory.  Memory might be paged by the
 host at any time.
 
@@ -161,7 +161,7 @@ Shadow pages contain the following information:
   role.cr4_pae:
     Contains the value of cr4.pae for which the page is valid (e.g. whether
     32-bit or 64-bit gptes are in use).
-  role.cr4_nxe:
+  role.nxe:
     Contains the value of efer.nxe for which the page is valid.
   role.cr0_wp:
     Contains the value of cr0.wp for which the page is valid.
@@ -180,7 +180,9 @@ Shadow pages contain the following information:
     guest pages as leaves.
   gfns:
     An array of 512 guest frame numbers, one for each present pte.  Used to
-    perform a reverse map from a pte to a gfn.
+    perform a reverse map from a pte to a gfn. When role.direct is set, any
+    element of this array can be calculated from the gfn field when used, in
+    this case, the array of gfns is not allocated. See role.direct and gfn.
   slot_bitmap:
     A bitmap containing one bit per memory slot.  If the page contains a pte
     mapping a page from memory slot n, then bit n of slot_bitmap will be set
@@ -296,6 +298,48 @@ Host translation updates:
   - look up affected sptes through reverse map
   - drop (or update) translations
 
+Emulating cr0.wp
+================
+
+If tdp is not enabled, the host must keep cr0.wp=1 so page write protection
+works for the guest kernel, not guest guest userspace.  When the guest
+cr0.wp=1, this does not present a problem.  However when the guest cr0.wp=0,
+we cannot map the permissions for gpte.u=1, gpte.w=0 to any spte (the
+semantics require allowing any guest kernel access plus user read access).
+
+We handle this by mapping the permissions to two possible sptes, depending
+on fault type:
+
+- kernel write fault: spte.u=0, spte.w=1 (allows full kernel access,
+  disallows user access)
+- read fault: spte.u=1, spte.w=0 (allows full read access, disallows kernel
+  write access)
+
+(user write faults generate a #PF)
+
+Large pages
+===========
+
+The mmu supports all combinations of large and small guest and host pages.
+Supported page sizes include 4k, 2M, 4M, and 1G.  4M pages are treated as
+two separate 2M pages, on both guest and host, since the mmu always uses PAE
+paging.
+
+To instantiate a large spte, four constraints must be satisfied:
+
+- the spte must point to a large host page
+- the guest pte must be a large pte of at least equivalent size (if tdp is
+  enabled, there is no guest pte and this condition is satisified)
+- if the spte will be writeable, the large page frame may not overlap any
+  write-protected pages
+- the guest page must be wholly contained by a single memory slot
+
+To check the last two conditions, the mmu maintains a ->write_count set of
+arrays for each memory slot and large page size.  Every write protected page
+causes its write_count to be incremented, thus preventing instantiation of
+a large spte.  The frames at the end of an unaligned memory slot have
+artificically inflated ->write_counts so they can never be instantiated.
+
 Further reading
 ===============
 
diff --git a/Documentation/kvm/msr.txt b/Documentation/kvm/msr.txt
new file mode 100644
index 000000000000..8ddcfe84c09a
--- /dev/null
+++ b/Documentation/kvm/msr.txt
@@ -0,0 +1,153 @@
+KVM-specific MSRs.
+Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010
+=====================================================
+
+KVM makes use of some custom MSRs to service some requests.
+At present, this facility is only used by kvmclock.
+
+Custom MSRs have a range reserved for them, that goes from
+0x4b564d00 to 0x4b564dff. There are MSRs outside this area,
+but they are deprecated and their use is discouraged.
+
+Custom MSR list
+--------
+
+The current supported Custom MSR list is:
+
+MSR_KVM_WALL_CLOCK_NEW:   0x4b564d00
+
+	data: 4-byte alignment physical address of a memory area which must be
+	in guest RAM. This memory is expected to hold a copy of the following
+	structure:
+
+	struct pvclock_wall_clock {
+		u32   version;
+		u32   sec;
+		u32   nsec;
+	} __attribute__((__packed__));
+
+	whose data will be filled in by the hypervisor. The hypervisor is only
+	guaranteed to update this data at the moment of MSR write.
+	Users that want to reliably query this information more than once have
+	to write more than once to this MSR. Fields have the following meanings:
+
+		version: guest has to check version before and after grabbing
+		time information and check that they are both equal and even.
+		An odd version indicates an in-progress update.
+
+		sec: number of seconds for wallclock.
+
+		nsec: number of nanoseconds for wallclock.
+
+	Note that although MSRs are per-CPU entities, the effect of this
+	particular MSR is global.
+
+	Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
+	leaf prior to usage.
+
+MSR_KVM_SYSTEM_TIME_NEW:  0x4b564d01
+
+	data: 4-byte aligned physical address of a memory area which must be in
+	guest RAM, plus an enable bit in bit 0. This memory is expected to hold
+	a copy of the following structure:
+
+	struct pvclock_vcpu_time_info {
+		u32   version;
+		u32   pad0;
+		u64   tsc_timestamp;
+		u64   system_time;
+		u32   tsc_to_system_mul;
+		s8    tsc_shift;
+		u8    flags;
+		u8    pad[2];
+	} __attribute__((__packed__)); /* 32 bytes */
+
+	whose data will be filled in by the hypervisor periodically. Only one
+	write, or registration, is needed for each VCPU. The interval between
+	updates of this structure is arbitrary and implementation-dependent.
+	The hypervisor may update this structure at any time it sees fit until
+	anything with bit0 == 0 is written to it.
+
+	Fields have the following meanings:
+
+		version: guest has to check version before and after grabbing
+		time information and check that they are both equal and even.
+		An odd version indicates an in-progress update.
+
+		tsc_timestamp: the tsc value at the current VCPU at the time
+		of the update of this structure. Guests can subtract this value
+		from current tsc to derive a notion of elapsed time since the
+		structure update.
+
+		system_time: a host notion of monotonic time, including sleep
+		time at the time this structure was last updated. Unit is
+		nanoseconds.
+
+		tsc_to_system_mul: a function of the tsc frequency. One has
+		to multiply any tsc-related quantity by this value to get
+		a value in nanoseconds, besides dividing by 2^tsc_shift
+
+		tsc_shift: cycle to nanosecond divider, as a power of two, to
+		allow for shift rights. One has to shift right any tsc-related
+		quantity by this value to get a value in nanoseconds, besides
+		multiplying by tsc_to_system_mul.
+
+		With this information, guests can derive per-CPU time by
+		doing:
+
+			time = (current_tsc - tsc_timestamp)
+			time = (time * tsc_to_system_mul) >> tsc_shift
+			time = time + system_time
+
+		flags: bits in this field indicate extended capabilities
+		coordinated between the guest and the hypervisor. Availability
+		of specific flags has to be checked in 0x40000001 cpuid leaf.
+		Current flags are:
+
+		 flag bit   | cpuid bit    | meaning
+		-------------------------------------------------------------
+			    |	           | time measures taken across
+		     0      |	   24      | multiple cpus are guaranteed to
+			    |		   | be monotonic
+		-------------------------------------------------------------
+
+	Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
+	leaf prior to usage.
+
+
+MSR_KVM_WALL_CLOCK:  0x11
+
+	data and functioning: same as MSR_KVM_WALL_CLOCK_NEW. Use that instead.
+
+	This MSR falls outside the reserved KVM range and may be removed in the
+	future. Its usage is deprecated.
+
+	Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
+	leaf prior to usage.
+
+MSR_KVM_SYSTEM_TIME: 0x12
+
+	data and functioning: same as MSR_KVM_SYSTEM_TIME_NEW. Use that instead.
+
+	This MSR falls outside the reserved KVM range and may be removed in the
+	future. Its usage is deprecated.
+
+	Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
+	leaf prior to usage.
+
+	The suggested algorithm for detecting kvmclock presence is then:
+
+		if (!kvm_para_available())    /* refer to cpuid.txt */
+			return NON_PRESENT;
+
+		flags = cpuid_eax(0x40000001);
+		if (flags & 3) {
+			msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW;
+			msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW;
+			return PRESENT;
+		} else if (flags & 0) {
+			msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
+			msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
+			return PRESENT;
+		} else
+			return NON_PRESENT;
diff --git a/Documentation/kvm/ppc-pv.txt b/Documentation/kvm/ppc-pv.txt
new file mode 100644
index 000000000000..a7f2244b3be9
--- /dev/null
+++ b/Documentation/kvm/ppc-pv.txt
@@ -0,0 +1,196 @@
+The PPC KVM paravirtual interface
+=================================
+
+The basic execution principle by which KVM on PowerPC works is to run all kernel
+space code in PR=1 which is user space. This way we trap all privileged
+instructions and can emulate them accordingly.
+
+Unfortunately that is also the downfall. There are quite some privileged
+instructions that needlessly return us to the hypervisor even though they
+could be handled differently.
+
+This is what the PPC PV interface helps with. It takes privileged instructions
+and transforms them into unprivileged ones with some help from the hypervisor.
+This cuts down virtualization costs by about 50% on some of my benchmarks.
+
+The code for that interface can be found in arch/powerpc/kernel/kvm*
+
+Querying for existence
+======================
+
+To find out if we're running on KVM or not, we leverage the device tree. When
+Linux is running on KVM, a node /hypervisor exists. That node contains a
+compatible property with the value "linux,kvm".
+
+Once you determined you're running under a PV capable KVM, you can now use
+hypercalls as described below.
+
+KVM hypercalls
+==============
+
+Inside the device tree's /hypervisor node there's a property called
+'hypercall-instructions'. This property contains at most 4 opcodes that make
+up the hypercall. To call a hypercall, just call these instructions.
+
+The parameters are as follows:
+
+	Register	IN			OUT
+
+	r0		-			volatile
+	r3		1st parameter		Return code
+	r4		2nd parameter		1st output value
+	r5		3rd parameter		2nd output value
+	r6		4th parameter		3rd output value
+	r7		5th parameter		4th output value
+	r8		6th parameter		5th output value
+	r9		7th parameter		6th output value
+	r10		8th parameter		7th output value
+	r11		hypercall number	8th output value
+	r12		-			volatile
+
+Hypercall definitions are shared in generic code, so the same hypercall numbers
+apply for x86 and powerpc alike with the exception that each KVM hypercall
+also needs to be ORed with the KVM vendor code which is (42 << 16).
+
+Return codes can be as follows:
+
+	Code		Meaning
+
+	0		Success
+	12		Hypercall not implemented
+	<0		Error
+
+The magic page
+==============
+
+To enable communication between the hypervisor and guest there is a new shared
+page that contains parts of supervisor visible register state. The guest can
+map this shared page using the KVM hypercall KVM_HC_PPC_MAP_MAGIC_PAGE.
+
+With this hypercall issued the guest always gets the magic page mapped at the
+desired location in effective and physical address space. For now, we always
+map the page to -4096. This way we can access it using absolute load and store
+functions. The following instruction reads the first field of the magic page:
+
+	ld	rX, -4096(0)
+
+The interface is designed to be extensible should there be need later to add
+additional registers to the magic page. If you add fields to the magic page,
+also define a new hypercall feature to indicate that the host can give you more
+registers. Only if the host supports the additional features, make use of them.
+
+The magic page has the following layout as described in
+arch/powerpc/include/asm/kvm_para.h:
+
+struct kvm_vcpu_arch_shared {
+	__u64 scratch1;
+	__u64 scratch2;
+	__u64 scratch3;
+	__u64 critical;		/* Guest may not get interrupts if == r1 */
+	__u64 sprg0;
+	__u64 sprg1;
+	__u64 sprg2;
+	__u64 sprg3;
+	__u64 srr0;
+	__u64 srr1;
+	__u64 dar;
+	__u64 msr;
+	__u32 dsisr;
+	__u32 int_pending;	/* Tells the guest if we have an interrupt */
+};
+
+Additions to the page must only occur at the end. Struct fields are always 32
+or 64 bit aligned, depending on them being 32 or 64 bit wide respectively.
+
+Magic page features
+===================
+
+When mapping the magic page using the KVM hypercall KVM_HC_PPC_MAP_MAGIC_PAGE,
+a second return value is passed to the guest. This second return value contains
+a bitmap of available features inside the magic page.
+
+The following enhancements to the magic page are currently available:
+
+  KVM_MAGIC_FEAT_SR		Maps SR registers r/w in the magic page
+
+For enhanced features in the magic page, please check for the existence of the
+feature before using them!
+
+MSR bits
+========
+
+The MSR contains bits that require hypervisor intervention and bits that do
+not require direct hypervisor intervention because they only get interpreted
+when entering the guest or don't have any impact on the hypervisor's behavior.
+
+The following bits are safe to be set inside the guest:
+
+  MSR_EE
+  MSR_RI
+  MSR_CR
+  MSR_ME
+
+If any other bit changes in the MSR, please still use mtmsr(d).
+
+Patched instructions
+====================
+
+The "ld" and "std" instructions are transormed to "lwz" and "stw" instructions
+respectively on 32 bit systems with an added offset of 4 to accomodate for big
+endianness.
+
+The following is a list of mapping the Linux kernel performs when running as
+guest. Implementing any of those mappings is optional, as the instruction traps
+also act on the shared page. So calling privileged instructions still works as
+before.
+
+From			To
+====			==
+
+mfmsr	rX		ld	rX, magic_page->msr
+mfsprg	rX, 0		ld	rX, magic_page->sprg0
+mfsprg	rX, 1		ld	rX, magic_page->sprg1
+mfsprg	rX, 2		ld	rX, magic_page->sprg2
+mfsprg	rX, 3		ld	rX, magic_page->sprg3
+mfsrr0	rX		ld	rX, magic_page->srr0
+mfsrr1	rX		ld	rX, magic_page->srr1
+mfdar	rX		ld	rX, magic_page->dar
+mfdsisr	rX		lwz	rX, magic_page->dsisr
+
+mtmsr	rX		std	rX, magic_page->msr
+mtsprg	0, rX		std	rX, magic_page->sprg0
+mtsprg	1, rX		std	rX, magic_page->sprg1
+mtsprg	2, rX		std	rX, magic_page->sprg2
+mtsprg	3, rX		std	rX, magic_page->sprg3
+mtsrr0	rX		std	rX, magic_page->srr0
+mtsrr1	rX		std	rX, magic_page->srr1
+mtdar	rX		std	rX, magic_page->dar
+mtdsisr	rX		stw	rX, magic_page->dsisr
+
+tlbsync			nop
+
+mtmsrd	rX, 0		b	<special mtmsr section>
+mtmsr	rX		b	<special mtmsr section>
+
+mtmsrd	rX, 1		b	<special mtmsrd section>
+
+[Book3S only]
+mtsrin	rX, rY		b	<special mtsrin section>
+
+[BookE only]
+wrteei	[0|1]		b	<special wrteei section>
+
+
+Some instructions require more logic to determine what's going on than a load
+or store instruction can deliver. To enable patching of those, we keep some
+RAM around where we can live translate instructions to. What happens is the
+following:
+
+	1) copy emulation code to memory
+	2) patch that code to fit the emulated instruction
+	3) patch that code to return to the original pc + 4
+	4) patch the original instruction to branch to the new code
+
+That way we can inject an arbitrary amount of code as replacement for a single
+instruction. This allows us to check for pending interrupts when setting EE=1
+for example.
diff --git a/Documentation/kvm/review-checklist.txt b/Documentation/kvm/review-checklist.txt
new file mode 100644
index 000000000000..730475ae1b8d
--- /dev/null
+++ b/Documentation/kvm/review-checklist.txt
@@ -0,0 +1,38 @@
+Review checklist for kvm patches
+================================
+
+1.  The patch must follow Documentation/CodingStyle and
+    Documentation/SubmittingPatches.
+
+2.  Patches should be against kvm.git master branch.
+
+3.  If the patch introduces or modifies a new userspace API:
+    - the API must be documented in Documentation/kvm/api.txt
+    - the API must be discoverable using KVM_CHECK_EXTENSION
+
+4.  New state must include support for save/restore.
+
+5.  New features must default to off (userspace should explicitly request them).
+    Performance improvements can and should default to on.
+
+6.  New cpu features should be exposed via KVM_GET_SUPPORTED_CPUID2
+
+7.  Emulator changes should be accompanied by unit tests for qemu-kvm.git
+    kvm/test directory.
+
+8.  Changes should be vendor neutral when possible.  Changes to common code
+    are better than duplicating changes to vendor code.
+
+9.  Similarly, prefer changes to arch independent code than to arch dependent
+    code.
+
+10. User/kernel interfaces and guest/host interfaces must be 64-bit clean
+    (all variables and sizes naturally aligned on 64-bit; use specific types
+    only - u64 rather than ulong).
+
+11. New guest visible features must either be documented in a hardware manual
+    or be accompanied by documentation.
+
+12. Features must be robust against reset and kexec - for example, shared
+    host/guest memory must be unshared to prevent the host from writing to
+    guest memory that the guest has not reserved for this purpose.
diff --git a/Documentation/kvm/timekeeping.txt b/Documentation/kvm/timekeeping.txt
new file mode 100644
index 000000000000..0c5033a58c9e
--- /dev/null
+++ b/Documentation/kvm/timekeeping.txt
@@ -0,0 +1,612 @@
+
+	Timekeeping Virtualization for X86-Based Architectures
+
+	Zachary Amsden <zamsden@redhat.com>
+	Copyright (c) 2010, Red Hat.  All rights reserved.
+
+1) Overview
+2) Timing Devices
+3) TSC Hardware
+4) Virtualization Problems
+
+=========================================================================
+
+1) Overview
+
+One of the most complicated parts of the X86 platform, and specifically,
+the virtualization of this platform is the plethora of timing devices available
+and the complexity of emulating those devices.  In addition, virtualization of
+time introduces a new set of challenges because it introduces a multiplexed
+division of time beyond the control of the guest CPU.
+
+First, we will describe the various timekeeping hardware available, then
+present some of the problems which arise and solutions available, giving
+specific recommendations for certain classes of KVM guests.
+
+The purpose of this document is to collect data and information relevant to
+timekeeping which may be difficult to find elsewhere, specifically,
+information relevant to KVM and hardware-based virtualization.
+
+=========================================================================
+
+2) Timing Devices
+
+First we discuss the basic hardware devices available.  TSC and the related
+KVM clock are special enough to warrant a full exposition and are described in
+the following section.
+
+2.1) i8254 - PIT
+
+One of the first timer devices available is the programmable interrupt timer,
+or PIT.  The PIT has a fixed frequency 1.193182 MHz base clock and three
+channels which can be programmed to deliver periodic or one-shot interrupts.
+These three channels can be configured in different modes and have individual
+counters.  Channel 1 and 2 were not available for general use in the original
+IBM PC, and historically were connected to control RAM refresh and the PC
+speaker.  Now the PIT is typically integrated as part of an emulated chipset
+and a separate physical PIT is not used.
+
+The PIT uses I/O ports 0x40 - 0x43.  Access to the 16-bit counters is done
+using single or multiple byte access to the I/O ports.  There are 6 modes
+available, but not all modes are available to all timers, as only timer 2
+has a connected gate input, required for modes 1 and 5.  The gate line is
+controlled by port 61h, bit 0, as illustrated in the following diagram.
+
+ --------------             ----------------
+|              |           |                |
+|  1.1932 MHz  |---------->| CLOCK      OUT | ---------> IRQ 0
+|    Clock     |   |       |                |
+ --------------    |    +->| GATE  TIMER 0  |
+                   |        ----------------
+                   |
+                   |        ----------------
+                   |       |                |
+                   |------>| CLOCK      OUT | ---------> 66.3 KHZ DRAM
+                   |       |                |            (aka /dev/null)
+                   |    +->| GATE  TIMER 1  |
+                   |        ----------------
+                   |
+                   |        ----------------
+                   |       |                |
+                   |------>| CLOCK      OUT | ---------> Port 61h, bit 5
+                           |                |      |
+Port 61h, bit 0 ---------->| GATE  TIMER 2  |       \_.----   ____
+                            ----------------         _|    )--|LPF|---Speaker
+                                                    / *----   \___/
+Port 61h, bit 1 -----------------------------------/
+
+The timer modes are now described.
+
+Mode 0: Single Timeout.   This is a one-shot software timeout that counts down
+ when the gate is high (always true for timers 0 and 1).  When the count
+ reaches zero, the output goes high.
+
+Mode 1: Triggered One-shot.  The output is intially set high.  When the gate
+ line is set high, a countdown is initiated (which does not stop if the gate is
+ lowered), during which the output is set low.  When the count reaches zero,
+ the output goes high.
+
+Mode 2: Rate Generator.  The output is initially set high.  When the countdown
+ reaches 1, the output goes low for one count and then returns high.  The value
+ is reloaded and the countdown automatically resumes.  If the gate line goes
+ low, the count is halted.  If the output is low when the gate is lowered, the
+ output automatically goes high (this only affects timer 2).
+
+Mode 3: Square Wave.   This generates a high / low square wave.  The count
+ determines the length of the pulse, which alternates between high and low
+ when zero is reached.  The count only proceeds when gate is high and is
+ automatically reloaded on reaching zero.  The count is decremented twice at
+ each clock to generate a full high / low cycle at the full periodic rate.
+ If the count is even, the clock remains high for N/2 counts and low for N/2
+ counts; if the clock is odd, the clock is high for (N+1)/2 counts and low
+ for (N-1)/2 counts.  Only even values are latched by the counter, so odd
+ values are not observed when reading.  This is the intended mode for timer 2,
+ which generates sine-like tones by low-pass filtering the square wave output.
+
+Mode 4: Software Strobe.  After programming this mode and loading the counter,
+ the output remains high until the counter reaches zero.  Then the output
+ goes low for 1 clock cycle and returns high.  The counter is not reloaded.
+ Counting only occurs when gate is high.
+
+Mode 5: Hardware Strobe.  After programming and loading the counter, the
+ output remains high.  When the gate is raised, a countdown is initiated
+ (which does not stop if the gate is lowered).  When the counter reaches zero,
+ the output goes low for 1 clock cycle and then returns high.  The counter is
+ not reloaded.
+
+In addition to normal binary counting, the PIT supports BCD counting.  The
+command port, 0x43 is used to set the counter and mode for each of the three
+timers.
+
+PIT commands, issued to port 0x43, using the following bit encoding:
+
+Bit 7-4: Command (See table below)
+Bit 3-1: Mode (000 = Mode 0, 101 = Mode 5, 11X = undefined)
+Bit 0  : Binary (0) / BCD (1)
+
+Command table:
+
+0000 - Latch Timer 0 count for port 0x40
+	sample and hold the count to be read in port 0x40;
+	additional commands ignored until counter is read;
+	mode bits ignored.
+
+0001 - Set Timer 0 LSB mode for port 0x40
+	set timer to read LSB only and force MSB to zero;
+	mode bits set timer mode
+
+0010 - Set Timer 0 MSB mode for port 0x40
+	set timer to read MSB only and force LSB to zero;
+	mode bits set timer mode
+
+0011 - Set Timer 0 16-bit mode for port 0x40
+	set timer to read / write LSB first, then MSB;
+	mode bits set timer mode
+
+0100 - Latch Timer 1 count for port 0x41 - as described above
+0101 - Set Timer 1 LSB mode for port 0x41 - as described above
+0110 - Set Timer 1 MSB mode for port 0x41 - as described above
+0111 - Set Timer 1 16-bit mode for port 0x41 - as described above
+
+1000 - Latch Timer 2 count for port 0x42 - as described above
+1001 - Set Timer 2 LSB mode for port 0x42 - as described above
+1010 - Set Timer 2 MSB mode for port 0x42 - as described above
+1011 - Set Timer 2 16-bit mode for port 0x42 as described above
+
+1101 - General counter latch
+	Latch combination of counters into corresponding ports
+	Bit 3 = Counter 2
+	Bit 2 = Counter 1
+	Bit 1 = Counter 0
+	Bit 0 = Unused
+
+1110 - Latch timer status
+	Latch combination of counter mode into corresponding ports
+	Bit 3 = Counter 2
+	Bit 2 = Counter 1
+	Bit 1 = Counter 0
+
+	The output of ports 0x40-0x42 following this command will be:
+
+	Bit 7 = Output pin
+	Bit 6 = Count loaded (0 if timer has expired)
+	Bit 5-4 = Read / Write mode
+	    01 = MSB only
+	    10 = LSB only
+	    11 = LSB / MSB (16-bit)
+	Bit 3-1 = Mode
+	Bit 0 = Binary (0) / BCD mode (1)
+
+2.2) RTC
+
+The second device which was available in the original PC was the MC146818 real
+time clock.  The original device is now obsolete, and usually emulated by the
+system chipset, sometimes by an HPET and some frankenstein IRQ routing.
+
+The RTC is accessed through CMOS variables, which uses an index register to
+control which bytes are read.  Since there is only one index register, read
+of the CMOS and read of the RTC require lock protection (in addition, it is
+dangerous to allow userspace utilities such as hwclock to have direct RTC
+access, as they could corrupt kernel reads and writes of CMOS memory).
+
+The RTC generates an interrupt which is usually routed to IRQ 8.  The interrupt
+can function as a periodic timer, an additional once a day alarm, and can issue
+interrupts after an update of the CMOS registers by the MC146818 is complete.
+The type of interrupt is signalled in the RTC status registers.
+
+The RTC will update the current time fields by battery power even while the
+system is off.  The current time fields should not be read while an update is
+in progress, as indicated in the status register.
+
+The clock uses a 32.768kHz crystal, so bits 6-4 of register A should be
+programmed to a 32kHz divider if the RTC is to count seconds.
+
+This is the RAM map originally used for the RTC/CMOS:
+
+Location    Size    Description
+------------------------------------------
+00h         byte    Current second (BCD)
+01h         byte    Seconds alarm (BCD)
+02h         byte    Current minute (BCD)
+03h         byte    Minutes alarm (BCD)
+04h         byte    Current hour (BCD)
+05h         byte    Hours alarm (BCD)
+06h         byte    Current day of week (BCD)
+07h         byte    Current day of month (BCD)
+08h         byte    Current month (BCD)
+09h         byte    Current year (BCD)
+0Ah         byte    Register A
+                       bit 7   = Update in progress
+                       bit 6-4 = Divider for clock
+                                  000 = 4.194 MHz
+                                  001 = 1.049 MHz
+                                  010 = 32 kHz
+                                  10X = test modes
+                                  110 = reset / disable
+                                  111 = reset / disable
+                       bit 3-0 = Rate selection for periodic interrupt
+                                  000 = periodic timer disabled
+                                  001 = 3.90625 uS
+                                  010 = 7.8125 uS
+                                  011 = .122070 mS
+                                  100 = .244141 mS
+                                     ...
+                                 1101 = 125 mS
+                                 1110 = 250 mS
+                                 1111 = 500 mS
+0Bh         byte    Register B
+                       bit 7   = Run (0) / Halt (1)
+                       bit 6   = Periodic interrupt enable
+                       bit 5   = Alarm interrupt enable
+                       bit 4   = Update-ended interrupt enable
+                       bit 3   = Square wave interrupt enable
+                       bit 2   = BCD calendar (0) / Binary (1)
+                       bit 1   = 12-hour mode (0) / 24-hour mode (1)
+                       bit 0   = 0 (DST off) / 1 (DST enabled)
+OCh         byte    Register C (read only)
+                       bit 7   = interrupt request flag (IRQF)
+                       bit 6   = periodic interrupt flag (PF)
+                       bit 5   = alarm interrupt flag (AF)
+                       bit 4   = update interrupt flag (UF)
+                       bit 3-0 = reserved
+ODh         byte    Register D (read only)
+                       bit 7   = RTC has power
+                       bit 6-0 = reserved
+32h         byte    Current century BCD (*)
+  (*) location vendor specific and now determined from ACPI global tables
+
+2.3) APIC
+
+On Pentium and later processors, an on-board timer is available to each CPU
+as part of the Advanced Programmable Interrupt Controller.  The APIC is
+accessed through memory-mapped registers and provides interrupt service to each
+CPU, used for IPIs and local timer interrupts.
+
+Although in theory the APIC is a safe and stable source for local interrupts,
+in practice, many bugs and glitches have occurred due to the special nature of
+the APIC CPU-local memory-mapped hardware.  Beware that CPU errata may affect
+the use of the APIC and that workarounds may be required.  In addition, some of
+these workarounds pose unique constraints for virtualization - requiring either
+extra overhead incurred from extra reads of memory-mapped I/O or additional
+functionality that may be more computationally expensive to implement.
+
+Since the APIC is documented quite well in the Intel and AMD manuals, we will
+avoid repetition of the detail here.  It should be pointed out that the APIC
+timer is programmed through the LVT (local vector timer) register, is capable
+of one-shot or periodic operation, and is based on the bus clock divided down
+by the programmable divider register.
+
+2.4) HPET
+
+HPET is quite complex, and was originally intended to replace the PIT / RTC
+support of the X86 PC.  It remains to be seen whether that will be the case, as
+the de facto standard of PC hardware is to emulate these older devices.  Some
+systems designated as legacy free may support only the HPET as a hardware timer
+device.
+
+The HPET spec is rather loose and vague, requiring at least 3 hardware timers,
+but allowing implementation freedom to support many more.  It also imposes no
+fixed rate on the timer frequency, but does impose some extremal values on
+frequency, error and slew.
+
+In general, the HPET is recommended as a high precision (compared to PIT /RTC)
+time source which is independent of local variation (as there is only one HPET
+in any given system).  The HPET is also memory-mapped, and its presence is
+indicated through ACPI tables by the BIOS.
+
+Detailed specification of the HPET is beyond the current scope of this
+document, as it is also very well documented elsewhere.
+
+2.5) Offboard Timers
+
+Several cards, both proprietary (watchdog boards) and commonplace (e1000) have
+timing chips built into the cards which may have registers which are accessible
+to kernel or user drivers.  To the author's knowledge, using these to generate
+a clocksource for a Linux or other kernel has not yet been attempted and is in
+general frowned upon as not playing by the agreed rules of the game.  Such a
+timer device would require additional support to be virtualized properly and is
+not considered important at this time as no known operating system does this.
+
+=========================================================================
+
+3) TSC Hardware
+
+The TSC or time stamp counter is relatively simple in theory; it counts
+instruction cycles issued by the processor, which can be used as a measure of
+time.  In practice, due to a number of problems, it is the most complicated
+timekeeping device to use.
+
+The TSC is represented internally as a 64-bit MSR which can be read with the
+RDMSR, RDTSC, or RDTSCP (when available) instructions.  In the past, hardware
+limitations made it possible to write the TSC, but generally on old hardware it
+was only possible to write the low 32-bits of the 64-bit counter, and the upper
+32-bits of the counter were cleared.  Now, however, on Intel processors family
+0Fh, for models 3, 4 and 6, and family 06h, models e and f, this restriction
+has been lifted and all 64-bits are writable.  On AMD systems, the ability to
+write the TSC MSR is not an architectural guarantee.
+
+The TSC is accessible from CPL-0 and conditionally, for CPL > 0 software by
+means of the CR4.TSD bit, which when enabled, disables CPL > 0 TSC access.
+
+Some vendors have implemented an additional instruction, RDTSCP, which returns
+atomically not just the TSC, but an indicator which corresponds to the
+processor number.  This can be used to index into an array of TSC variables to
+determine offset information in SMP systems where TSCs are not synchronized.
+The presence of this instruction must be determined by consulting CPUID feature
+bits.
+
+Both VMX and SVM provide extension fields in the virtualization hardware which
+allows the guest visible TSC to be offset by a constant.  Newer implementations
+promise to allow the TSC to additionally be scaled, but this hardware is not
+yet widely available.
+
+3.1) TSC synchronization
+
+The TSC is a CPU-local clock in most implementations.  This means, on SMP
+platforms, the TSCs of different CPUs may start at different times depending
+on when the CPUs are powered on.  Generally, CPUs on the same die will share
+the same clock, however, this is not always the case.
+
+The BIOS may attempt to resynchronize the TSCs during the poweron process and
+the operating system or other system software may attempt to do this as well.
+Several hardware limitations make the problem worse - if it is not possible to
+write the full 64-bits of the TSC, it may be impossible to match the TSC in
+newly arriving CPUs to that of the rest of the system, resulting in
+unsynchronized TSCs.  This may be done by BIOS or system software, but in
+practice, getting a perfectly synchronized TSC will not be possible unless all
+values are read from the same clock, which generally only is possible on single
+socket systems or those with special hardware support.
+
+3.2) TSC and CPU hotplug
+
+As touched on already, CPUs which arrive later than the boot time of the system
+may not have a TSC value that is synchronized with the rest of the system.
+Either system software, BIOS, or SMM code may actually try to establish the TSC
+to a value matching the rest of the system, but a perfect match is usually not
+a guarantee.  This can have the effect of bringing a system from a state where
+TSC is synchronized back to a state where TSC synchronization flaws, however
+small, may be exposed to the OS and any virtualization environment.
+
+3.3) TSC and multi-socket / NUMA
+
+Multi-socket systems, especially large multi-socket systems are likely to have
+individual clocksources rather than a single, universally distributed clock.
+Since these clocks are driven by different crystals, they will not have
+perfectly matched frequency, and temperature and electrical variations will
+cause the CPU clocks, and thus the TSCs to drift over time.  Depending on the
+exact clock and bus design, the drift may or may not be fixed in absolute
+error, and may accumulate over time.
+
+In addition, very large systems may deliberately slew the clocks of individual
+cores.  This technique, known as spread-spectrum clocking, reduces EMI at the
+clock frequency and harmonics of it, which may be required to pass FCC
+standards for telecommunications and computer equipment.
+
+It is recommended not to trust the TSCs to remain synchronized on NUMA or
+multiple socket systems for these reasons.
+
+3.4) TSC and C-states
+
+C-states, or idling states of the processor, especially C1E and deeper sleep
+states may be problematic for TSC as well.  The TSC may stop advancing in such
+a state, resulting in a TSC which is behind that of other CPUs when execution
+is resumed.  Such CPUs must be detected and flagged by the operating system
+based on CPU and chipset identifications.
+
+The TSC in such a case may be corrected by catching it up to a known external
+clocksource.
+
+3.5) TSC frequency change / P-states
+
+To make things slightly more interesting, some CPUs may change frequency.  They
+may or may not run the TSC at the same rate, and because the frequency change
+may be staggered or slewed, at some points in time, the TSC rate may not be
+known other than falling within a range of values.  In this case, the TSC will
+not be a stable time source, and must be calibrated against a known, stable,
+external clock to be a usable source of time.
+
+Whether the TSC runs at a constant rate or scales with the P-state is model
+dependent and must be determined by inspecting CPUID, chipset or vendor
+specific MSR fields.
+
+In addition, some vendors have known bugs where the P-state is actually
+compensated for properly during normal operation, but when the processor is
+inactive, the P-state may be raised temporarily to service cache misses from
+other processors.  In such cases, the TSC on halted CPUs could advance faster
+than that of non-halted processors.  AMD Turion processors are known to have
+this problem.
+
+3.6) TSC and STPCLK / T-states
+
+External signals given to the processor may also have the effect of stopping
+the TSC.  This is typically done for thermal emergency power control to prevent
+an overheating condition, and typically, there is no way to detect that this
+condition has happened.
+
+3.7) TSC virtualization - VMX
+
+VMX provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP
+instructions, which is enough for full virtualization of TSC in any manner.  In
+addition, VMX allows passing through the host TSC plus an additional TSC_OFFSET
+field specified in the VMCS.  Special instructions must be used to read and
+write the VMCS field.
+
+3.8) TSC virtualization - SVM
+
+SVM provides conditional trapping of RDTSC, RDMSR, WRMSR and RDTSCP
+instructions, which is enough for full virtualization of TSC in any manner.  In
+addition, SVM allows passing through the host TSC plus an additional offset
+field specified in the SVM control block.
+
+3.9) TSC feature bits in Linux
+
+In summary, there is no way to guarantee the TSC remains in perfect
+synchronization unless it is explicitly guaranteed by the architecture.  Even
+if so, the TSCs in multi-sockets or NUMA systems may still run independently
+despite being locally consistent.
+
+The following feature bits are used by Linux to signal various TSC attributes,
+but they can only be taken to be meaningful for UP or single node systems.
+
+X86_FEATURE_TSC 		: The TSC is available in hardware
+X86_FEATURE_RDTSCP		: The RDTSCP instruction is available
+X86_FEATURE_CONSTANT_TSC 	: The TSC rate is unchanged with P-states
+X86_FEATURE_NONSTOP_TSC		: The TSC does not stop in C-states
+X86_FEATURE_TSC_RELIABLE	: TSC sync checks are skipped (VMware)
+
+4) Virtualization Problems
+
+Timekeeping is especially problematic for virtualization because a number of
+challenges arise.  The most obvious problem is that time is now shared between
+the host and, potentially, a number of virtual machines.  Thus the virtual
+operating system does not run with 100% usage of the CPU, despite the fact that
+it may very well make that assumption.  It may expect it to remain true to very
+exacting bounds when interrupt sources are disabled, but in reality only its
+virtual interrupt sources are disabled, and the machine may still be preempted
+at any time.  This causes problems as the passage of real time, the injection
+of machine interrupts and the associated clock sources are no longer completely
+synchronized with real time.
+
+This same problem can occur on native harware to a degree, as SMM mode may
+steal cycles from the naturally on X86 systems when SMM mode is used by the
+BIOS, but not in such an extreme fashion.  However, the fact that SMM mode may
+cause similar problems to virtualization makes it a good justification for
+solving many of these problems on bare metal.
+
+4.1) Interrupt clocking
+
+One of the most immediate problems that occurs with legacy operating systems
+is that the system timekeeping routines are often designed to keep track of
+time by counting periodic interrupts.  These interrupts may come from the PIT
+or the RTC, but the problem is the same: the host virtualization engine may not
+be able to deliver the proper number of interrupts per second, and so guest
+time may fall behind.  This is especially problematic if a high interrupt rate
+is selected, such as 1000 HZ, which is unfortunately the default for many Linux
+guests.
+
+There are three approaches to solving this problem; first, it may be possible
+to simply ignore it.  Guests which have a separate time source for tracking
+'wall clock' or 'real time' may not need any adjustment of their interrupts to
+maintain proper time.  If this is not sufficient, it may be necessary to inject
+additional interrupts into the guest in order to increase the effective
+interrupt rate.  This approach leads to complications in extreme conditions,
+where host load or guest lag is too much to compensate for, and thus another
+solution to the problem has risen: the guest may need to become aware of lost
+ticks and compensate for them internally.  Although promising in theory, the
+implementation of this policy in Linux has been extremely error prone, and a
+number of buggy variants of lost tick compensation are distributed across
+commonly used Linux systems.
+
+Windows uses periodic RTC clocking as a means of keeping time internally, and
+thus requires interrupt slewing to keep proper time.  It does use a low enough
+rate (ed: is it 18.2 Hz?) however that it has not yet been a problem in
+practice.
+
+4.2) TSC sampling and serialization
+
+As the highest precision time source available, the cycle counter of the CPU
+has aroused much interest from developers.  As explained above, this timer has
+many problems unique to its nature as a local, potentially unstable and
+potentially unsynchronized source.  One issue which is not unique to the TSC,
+but is highlighted because of its very precise nature is sampling delay.  By
+definition, the counter, once read is already old.  However, it is also
+possible for the counter to be read ahead of the actual use of the result.
+This is a consequence of the superscalar execution of the instruction stream,
+which may execute instructions out of order.  Such execution is called
+non-serialized.  Forcing serialized execution is necessary for precise
+measurement with the TSC, and requires a serializing instruction, such as CPUID
+or an MSR read.
+
+Since CPUID may actually be virtualized by a trap and emulate mechanism, this
+serialization can pose a performance issue for hardware virtualization.  An
+accurate time stamp counter reading may therefore not always be available, and
+it may be necessary for an implementation to guard against "backwards" reads of
+the TSC as seen from other CPUs, even in an otherwise perfectly synchronized
+system.
+
+4.3) Timespec aliasing
+
+Additionally, this lack of serialization from the TSC poses another challenge
+when using results of the TSC when measured against another time source.  As
+the TSC is much higher precision, many possible values of the TSC may be read
+while another clock is still expressing the same value.
+
+That is, you may read (T,T+10) while external clock C maintains the same value.
+Due to non-serialized reads, you may actually end up with a range which
+fluctuates - from (T-1.. T+10).  Thus, any time calculated from a TSC, but
+calibrated against an external value may have a range of valid values.
+Re-calibrating this computation may actually cause time, as computed after the
+calibration, to go backwards, compared with time computed before the
+calibration.
+
+This problem is particularly pronounced with an internal time source in Linux,
+the kernel time, which is expressed in the theoretically high resolution
+timespec - but which advances in much larger granularity intervals, sometimes
+at the rate of jiffies, and possibly in catchup modes, at a much larger step.
+
+This aliasing requires care in the computation and recalibration of kvmclock
+and any other values derived from TSC computation (such as TSC virtualization
+itself).
+
+4.4) Migration
+
+Migration of a virtual machine raises problems for timekeeping in two ways.
+First, the migration itself may take time, during which interrupts cannot be
+delivered, and after which, the guest time may need to be caught up.  NTP may
+be able to help to some degree here, as the clock correction required is
+typically small enough to fall in the NTP-correctable window.
+
+An additional concern is that timers based off the TSC (or HPET, if the raw bus
+clock is exposed) may now be running at different rates, requiring compensation
+in some way in the hypervisor by virtualizing these timers.  In addition,
+migrating to a faster machine may preclude the use of a passthrough TSC, as a
+faster clock cannot be made visible to a guest without the potential of time
+advancing faster than usual.  A slower clock is less of a problem, as it can
+always be caught up to the original rate.  KVM clock avoids these problems by
+simply storing multipliers and offsets against the TSC for the guest to convert
+back into nanosecond resolution values.
+
+4.5) Scheduling
+
+Since scheduling may be based on precise timing and firing of interrupts, the
+scheduling algorithms of an operating system may be adversely affected by
+virtualization.  In theory, the effect is random and should be universally
+distributed, but in contrived as well as real scenarios (guest device access,
+causes of virtualization exits, possible context switch), this may not always
+be the case.  The effect of this has not been well studied.
+
+In an attempt to work around this, several implementations have provided a
+paravirtualized scheduler clock, which reveals the true amount of CPU time for
+which a virtual machine has been running.
+
+4.6) Watchdogs
+
+Watchdog timers, such as the lock detector in Linux may fire accidentally when
+running under hardware virtualization due to timer interrupts being delayed or
+misinterpretation of the passage of real time.  Usually, these warnings are
+spurious and can be ignored, but in some circumstances it may be necessary to
+disable such detection.
+
+4.7) Delays and precision timing
+
+Precise timing and delays may not be possible in a virtualized system.  This
+can happen if the system is controlling physical hardware, or issues delays to
+compensate for slower I/O to and from devices.  The first issue is not solvable
+in general for a virtualized system; hardware control software can't be
+adequately virtualized without a full real-time operating system, which would
+require an RT aware virtualization platform.
+
+The second issue may cause performance problems, but this is unlikely to be a
+significant issue.  In many cases these delays may be eliminated through
+configuration or paravirtualization.
+
+4.8) Covert channels and leaks
+
+In addition to the above problems, time information will inevitably leak to the
+guest about the host in anything but a perfect implementation of virtualized
+time.  This may allow the guest to infer the presence of a hypervisor (as in a
+red-pill type detection), and it may allow information to leak between guests
+by using CPU utilization itself as a signalling channel.  Preventing such
+problems would require completely isolated virtual time which may not track
+real time any longer.  This may be useful in certain security or QA contexts,
+but in general isn't recommended for real-world deployment scenarios.
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 0768fcc3ba3e..4beafa663dd6 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -173,7 +173,7 @@ Credits
 *******
 
 Olaf Tauber, who did the real hard work when he developed acerhk
-http://www.informatik.hu-berlin.de/~tauber/acerhk
+http://www.cakey.de/acerhk/
 All the authors of laptop ACPI modules in the kernel, whose work
 was an inspiration in the early days of acer_acpi
 Mathieu Segaud, who solved the problem with having to modprobe the driver
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index fc15538d8b46..1565eefd6fd5 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -960,70 +960,21 @@ Sysfs notes:
 	subsystem, and follow all of the hwmon guidelines at
 	Documentation/hwmon.
 
+EXPERIMENTAL: Embedded controller register dump
+-----------------------------------------------
 
-EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
-------------------------------------------------------------------------
-
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
-This feature dumps the values of 256 embedded controller
-registers. Values which have changed since the last time the registers
-were dumped are marked with a star:
-
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
-EC       +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
-EC 0x00:  a7  47  87  01  fe  96  00  08  01  00  cb  00  00  00  40  00
-EC 0x10:  00  00  ff  ff  f4  3c  87  09  01  ff  42  01  ff  ff  0d  00
-EC 0x20:  00  00  00  00  00  00  00  00  00  00  00  03  43  00  00  80
-EC 0x30:  01  07  1a  00  30  04  00  00 *85  00  00  10  00  50  00  00
-EC 0x40:  00  00  00  00  00  00  14  01  00  04  00  00  00  00  00  00
-EC 0x50:  00  c0  02  0d  00  01  01  02  02  03  03  03  03 *bc *02 *bc
-EC 0x60: *02 *bc *02  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0x70:  00  00  00  00  00  12  30  40 *24 *26 *2c *27 *20  80 *1f  80
-EC 0x80:  00  00  00  06 *37 *0e  03  00  00  00  0e  07  00  00  00  00
-EC 0x90:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xa0: *ff  09  ff  09  ff  ff *64  00 *00 *00 *a2  41 *ff *ff *e0  00
-EC 0xb0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xc0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xd0:  03  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xe0:  00  00  00  00  00  00  00  00  11  20  49  04  24  06  55  03
-EC 0xf0:  31  55  48  54  35  38  57  57  08  2f  45  73  07  65  6c  1a
-
-This feature can be used to determine the register holding the fan
-speed on some models. To do that, do the following:
+This feature is not included in the thinkpad driver anymore.
+Instead the EC can be accessed through /sys/kernel/debug/ec with
+a userspace tool which can be found here:
+ftp://ftp.suse.com/pub/people/trenn/sources/ec
 
+Use it to determine the register holding the fan
+speed on some models. To do that, do the following:
 	- make sure the battery is fully charged
 	- make sure the fan is running
-	- run 'cat /proc/acpi/ibm/ecdump' several times, once per second or so
-
-The first step makes sure various charging-related values don't
-vary. The second ensures that the fan-related values do vary, since
-the fan speed fluctuates a bit. The third will (hopefully) mark the
-fan register with a star:
-
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
-EC       +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
-EC 0x00:  a7  47  87  01  fe  96  00  08  01  00  cb  00  00  00  40  00
-EC 0x10:  00  00  ff  ff  f4  3c  87  09  01  ff  42  01  ff  ff  0d  00
-EC 0x20:  00  00  00  00  00  00  00  00  00  00  00  03  43  00  00  80
-EC 0x30:  01  07  1a  00  30  04  00  00  85  00  00  10  00  50  00  00
-EC 0x40:  00  00  00  00  00  00  14  01  00  04  00  00  00  00  00  00
-EC 0x50:  00  c0  02  0d  00  01  01  02  02  03  03  03  03  bc  02  bc
-EC 0x60:  02  bc  02  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0x70:  00  00  00  00  00  12  30  40  24  27  2c  27  21  80  1f  80
-EC 0x80:  00  00  00  06 *be  0d  03  00  00  00  0e  07  00  00  00  00
-EC 0x90:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xa0:  ff  09  ff  09  ff  ff  64  00  00  00  a2  41  ff  ff  e0  00
-EC 0xb0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xc0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xd0:  03  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
-EC 0xe0:  00  00  00  00  00  00  00  00  11  20  49  04  24  06  55  03
-EC 0xf0:  31  55  48  54  35  38  57  57  08  2f  45  73  07  65  6c  1a
-
-Another set of values that varies often is the temperature
+	- use above mentioned tool to read out the EC
+
+Often fan and temperature values vary between
 readings. Since temperatures don't change vary fast, you can take
 several quick dumps to eliminate them.
 
@@ -1073,6 +1024,10 @@ ThinkPad-specific interface.  The driver will disable its native
 backlight brightness control interface if it detects that the standard
 ACPI interface is available in the ThinkPad.
 
+If you want to use the thinkpad-acpi backlight brightness control
+instead of the generic ACPI video backlight brightness control for some
+reason, you should use the acpi_backlight=vendor kernel parameter.
+
 The brightness_enable module parameter can be used to control whether
 the LCD brightness control feature will be enabled when available.
 brightness_enable=0 forces it to be disabled.  brightness_enable=1
diff --git a/Documentation/ldm.txt b/Documentation/ldm.txt
index 718085bc9f1a..4f80edd14d0a 100644
--- a/Documentation/ldm.txt
+++ b/Documentation/ldm.txt
@@ -98,7 +98,7 @@ More Documentation
 There is an Overview of the LDM together with complete Technical Documentation.
 It is available for download.
 
-  http://www.linux-ntfs.org/content/view/19/37/
+  http://www.linux-ntfs.org/
 
 If you have any LDM questions that aren't answered in the documentation, email
 me.
diff --git a/Documentation/lguest/Makefile b/Documentation/lguest/Makefile
index 28c8cdfcafd8..bebac6b4f332 100644
--- a/Documentation/lguest/Makefile
+++ b/Documentation/lguest/Makefile
@@ -1,5 +1,6 @@
 # This creates the demonstration utility "lguest" which runs a Linux guest.
-CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
+# Missing headers?  Add "-I../../include -I../../arch/x86/include"
+CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -U_FORTIFY_SOURCE
 
 all: lguest
 
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index e9ce3c554514..dc73bc54cc4e 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -39,14 +39,14 @@
 #include <limits.h>
 #include <stddef.h>
 #include <signal.h>
-#include "linux/lguest_launcher.h"
-#include "linux/virtio_config.h"
-#include "linux/virtio_net.h"
-#include "linux/virtio_blk.h"
-#include "linux/virtio_console.h"
-#include "linux/virtio_rng.h"
-#include "linux/virtio_ring.h"
-#include "asm/bootparam.h"
+#include <linux/virtio_config.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_blk.h>
+#include <linux/virtio_console.h>
+#include <linux/virtio_rng.h>
+#include <linux/virtio_ring.h>
+#include <asm/bootparam.h>
+#include "../../include/linux/lguest_launcher.h"
 /*L:110
  * We can ignore the 42 include files we need for this program, but I do want
  * to draw attention to the use of kernel-style types.
@@ -1447,14 +1447,15 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 static void configure_device(int fd, const char *tapif, u32 ipaddr)
 {
 	struct ifreq ifr;
-	struct sockaddr_in *sin = (struct sockaddr_in *)&ifr.ifr_addr;
+	struct sockaddr_in sin;
 
 	memset(&ifr, 0, sizeof(ifr));
 	strcpy(ifr.ifr_name, tapif);
 
 	/* Don't read these incantations.  Just cut & paste them like I did! */
-	sin->sin_family = AF_INET;
-	sin->sin_addr.s_addr = htonl(ipaddr);
+	sin.sin_family = AF_INET;
+	sin.sin_addr.s_addr = htonl(ipaddr);
+	memcpy(&ifr.ifr_addr, &sin, sizeof(sin));
 	if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
 		err(1, "Setting %s interface address", tapif);
 	ifr.ifr_flags = IFF_UP;
@@ -1639,15 +1640,6 @@ static void blk_request(struct virtqueue *vq)
 	off = out->sector * 512;
 
 	/*
-	 * The block device implements "barriers", where the Guest indicates
-	 * that it wants all previous writes to occur before this write.  We
-	 * don't have a way of asking our kernel to do a barrier, so we just
-	 * synchronize all the data in the file.  Pretty poor, no?
-	 */
-	if (out->type & VIRTIO_BLK_T_BARRIER)
-		fdatasync(vblk->fd);
-
-	/*
 	 * In general the virtio block driver is allowed to try SCSI commands.
 	 * It'd be nice if we supported eject, for example, but we don't.
 	 */
@@ -1679,6 +1671,13 @@ static void blk_request(struct virtqueue *vq)
 			/* Die, bad Guest, die. */
 			errx(1, "Write past end %llu+%u", off, ret);
 		}
+
+		wlen = sizeof(*in);
+		*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
+	} else if (out->type & VIRTIO_BLK_T_FLUSH) {
+		/* Flush */
+		ret = fdatasync(vblk->fd);
+		verbose("FLUSH fdatasync: %i\n", ret);
 		wlen = sizeof(*in);
 		*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
 	} else {
@@ -1702,15 +1701,6 @@ static void blk_request(struct virtqueue *vq)
 		}
 	}
 
-	/*
-	 * OK, so we noted that it was pretty poor to use an fdatasync as a
-	 * barrier.  But Christoph Hellwig points out that we need a sync
-	 * *afterwards* as well: "Barriers specify no reordering to the front
-	 * or the back."  And Jens Axboe confirmed it, so here we are:
-	 */
-	if (out->type & VIRTIO_BLK_T_BARRIER)
-		fdatasync(vblk->fd);
-
 	/* Finished that request. */
 	add_used(vq, head, wlen);
 }
@@ -1735,8 +1725,8 @@ static void setup_block_file(const char *filename)
 	vblk->fd = open_or_die(filename, O_RDWR|O_LARGEFILE);
 	vblk->len = lseek64(vblk->fd, 0, SEEK_END);
 
-	/* We support barriers. */
-	add_feature(dev, VIRTIO_BLK_F_BARRIER);
+	/* We support FLUSH. */
+	add_feature(dev, VIRTIO_BLK_F_FLUSH);
 
 	/* Tell Guest how many sectors this device has. */
 	conf.capacity = cpu_to_le64(vblk->len / 512);
diff --git a/Documentation/md.txt b/Documentation/md.txt
index e4e893ef3e01..a81c7b4790f2 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -1,5 +1,5 @@
 Tools that manage md devices can be found at
-   http://www.<country>.kernel.org/pub/linux/utils/raid/....
+   http://www.kernel.org/pub/linux/utils/raid/ 
 
 
 Boot time assembly of RAID arrays
diff --git a/Documentation/misc-devices/apds990x.txt b/Documentation/misc-devices/apds990x.txt
new file mode 100644
index 000000000000..d5408cade32f
--- /dev/null
+++ b/Documentation/misc-devices/apds990x.txt
@@ -0,0 +1,111 @@
+Kernel driver apds990x
+======================
+
+Supported chips:
+Avago APDS990X
+
+Data sheet:
+Not freely available
+
+Author:
+Samu Onkalo <samu.p.onkalo@nokia.com>
+
+Description
+-----------
+
+APDS990x is a combined ambient light and proximity sensor. ALS and proximity
+functionality are highly connected. ALS measurement path must be running
+while the proximity functionality is enabled.
+
+ALS produces raw measurement values for two channels: Clear channel
+(infrared + visible light) and IR only. However, threshold comparisons happen
+using clear channel only. Lux value and the threshold level on the HW
+might vary quite much depending the spectrum of the light source.
+
+Driver makes necessary conversions to both directions so that user handles
+only lux values. Lux value is calculated using information from the both
+channels. HW threshold level is calculated from the given lux value to match
+with current type of the lightning. Sometimes inaccuracy of the estimations
+lead to false interrupt, but that doesn't harm.
+
+ALS contains 4 different gain steps. Driver automatically
+selects suitable gain step. After each measurement, reliability of the results
+is estimated and new measurement is trigged if necessary.
+
+Platform data can provide tuned values to the conversion formulas if
+values are known. Otherwise plain sensor default values are used.
+
+Proximity side is little bit simpler. There is no need for complex conversions.
+It produces directly usable values.
+
+Driver controls chip operational state using pm_runtime framework.
+Voltage regulators are controlled based on chip operational state.
+
+SYSFS
+-----
+
+
+chip_id
+	RO - shows detected chip type and version
+
+power_state
+	RW - enable / disable chip. Uses counting logic
+	     1 enables the chip
+	     0 disables the chip
+lux0_input
+	RO - measured lux value
+	     sysfs_notify called when threshold interrupt occurs
+
+lux0_sensor_range
+	RO - lux0_input max value. Actually never reaches since sensor tends
+	     to saturate much before that. Real max value varies depending
+	     on the light spectrum etc.
+
+lux0_rate
+	RW - measurement rate in Hz
+
+lux0_rate_avail
+	RO - supported measurement rates
+
+lux0_calibscale
+	RW - calibration value. Set to neutral value by default.
+	     Output results are multiplied with calibscale / calibscale_default
+	     value.
+
+lux0_calibscale_default
+	RO - neutral calibration value
+
+lux0_thresh_above_value
+	RW - HI level threshold value. All results above the value
+	     trigs an interrupt. 65535 (i.e. sensor_range) disables the above
+	     interrupt.
+
+lux0_thresh_below_value
+	RW - LO level threshold value. All results below the value
+	     trigs an interrupt. 0 disables the below interrupt.
+
+prox0_raw
+	RO - measured proximity value
+	     sysfs_notify called when threshold interrupt occurs
+
+prox0_sensor_range
+	RO - prox0_raw max value (1023)
+
+prox0_raw_en
+	RW - enable / disable proximity - uses counting logic
+	     1 enables the proximity
+	     0 disables the proximity
+
+prox0_reporting_mode
+	RW - trigger / periodic. In "trigger" mode the driver tells two possible
+	     values: 0 or prox0_sensor_range value. 0 means no proximity,
+	     1023 means proximity. This causes minimal number of interrupts.
+	     In "periodic" mode the driver reports all values above
+	     prox0_thresh_above. This causes more interrupts, but it can give
+	     _rough_ estimate about the distance.
+
+prox0_reporting_mode_avail
+	RO - accepted values to prox0_reporting_mode (trigger, periodic)
+
+prox0_thresh_above_value
+	RW - threshold level which trigs proximity events.
diff --git a/Documentation/misc-devices/bh1770glc.txt b/Documentation/misc-devices/bh1770glc.txt
new file mode 100644
index 000000000000..7d64c014dc70
--- /dev/null
+++ b/Documentation/misc-devices/bh1770glc.txt
@@ -0,0 +1,116 @@
+Kernel driver bh1770glc
+=======================
+
+Supported chips:
+ROHM BH1770GLC
+OSRAM SFH7770
+
+Data sheet:
+Not freely available
+
+Author:
+Samu Onkalo <samu.p.onkalo@nokia.com>
+
+Description
+-----------
+BH1770GLC and SFH7770 are combined ambient light and proximity sensors.
+ALS and proximity parts operates on their own, but they shares common I2C
+interface and interrupt logic. In principle they can run on their own,
+but ALS side results are used to estimate reliability of the proximity sensor.
+
+ALS produces 16 bit lux values. The chip contains interrupt logic to produce
+low and high threshold interrupts.
+
+Proximity part contains IR-led driver up to 3 IR leds. The chip measures
+amount of reflected IR light and produces proximity result. Resolution is
+8 bit. Driver supports only one channel. Driver uses ALS results to estimate
+reliability of the proximity results. Thus ALS is always running while
+proximity detection is needed.
+
+Driver uses threshold interrupts to avoid need for polling the values.
+Proximity low interrupt doesn't exists in the chip. This is simulated
+by using a delayed work. As long as there is proximity threshold above
+interrupts the delayed work is pushed forward. So, when proximity level goes
+below the threshold value, there is no interrupt and the delayed work will
+finally run. This is handled as no proximity indication.
+
+Chip state is controlled via runtime pm framework when enabled in config.
+
+Calibscale factor is used to hide differences between the chips. By default
+value set to neutral state meaning factor of 1.00. To get proper values,
+calibrated source of light is needed as a reference. Calibscale factor is set
+so that measurement produces about the expected lux value.
+
+SYSFS
+-----
+
+chip_id
+	RO - shows detected chip type and version
+
+power_state
+	RW - enable / disable chip. Uses counting logic
+	     1 enables the chip
+	     0 disables the chip
+
+lux0_input
+	RO - measured lux value
+	     sysfs_notify called when threshold interrupt occurs
+
+lux0_sensor_range
+	RO - lux0_input max value
+
+lux0_rate
+	RW - measurement rate in Hz
+
+lux0_rate_avail
+	RO - supported measurement rates
+
+lux0_thresh_above_value
+	RW - HI level threshold value. All results above the value
+	     trigs an interrupt. 65535 (i.e. sensor_range) disables the above
+	     interrupt.
+
+lux0_thresh_below_value
+	RW - LO level threshold value. All results below the value
+	     trigs an interrupt. 0 disables the below interrupt.
+
+lux0_calibscale
+	RW - calibration value. Set to neutral value by default.
+	     Output results are multiplied with calibscale / calibscale_default
+	     value.
+
+lux0_calibscale_default
+	RO - neutral calibration value
+
+prox0_raw
+	RO - measured proximity value
+	     sysfs_notify called when threshold interrupt occurs
+
+prox0_sensor_range
+	RO - prox0_raw max value
+
+prox0_raw_en
+	RW - enable / disable proximity - uses counting logic
+	     1 enables the proximity
+	     0 disables the proximity
+
+prox0_thresh_above_count
+	RW - number of proximity interrupts needed before triggering the event
+
+prox0_rate_above
+	RW - Measurement rate (in Hz) when the level is above threshold
+	     i.e. when proximity on has been reported.
+
+prox0_rate_below
+	RW - Measurement rate (in Hz) when the level is below threshold
+	     i.e. when proximity off has been reported.
+
+prox0_rate_avail
+	RO - Supported proximity measurement rates in Hz
+
+prox0_thresh_above0_value
+	RW - threshold level which trigs proximity events.
+	     Filtered by persistence filter (prox0_thresh_above_count)
+
+prox0_thresh_above1_value
+	RW - threshold level which trigs event immediately
diff --git a/Documentation/misc-devices/c2port.txt b/Documentation/misc-devices/c2port.txt
index d9bf93ea4398..ea7344465610 100644
--- a/Documentation/misc-devices/c2port.txt
+++ b/Documentation/misc-devices/c2port.txt
@@ -32,10 +32,10 @@ The C2 Interface main references are at (http://www.silabs.com)
 Silicon Laboratories site], see:
 
 - AN127: FLASH Programming via the C2 Interface at
-http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/Small_Form_Factor/en/an127.pdf, and
+http://www.silabs.com/Support Documents/TechnicalDocs/an127.pdf 
 
 - C2 Specification at
-http://www.silabs.com/public/documents/tpub_doc/spec/Microcontrollers/en/C2spec.pdf,
+http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/an127.pdf&src=SearchResults
 
 however it implements a two wire serial communication protocol (bit
 banging) designed to enable in-system programming, debugging, and
diff --git a/Documentation/mmc/00-INDEX b/Documentation/mmc/00-INDEX
new file mode 100644
index 000000000000..fca586f5b853
--- /dev/null
+++ b/Documentation/mmc/00-INDEX
@@ -0,0 +1,4 @@
+00-INDEX
+        - this file
+mmc-dev-attrs.txt
+        - info on SD and MMC device attributes
diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt
new file mode 100644
index 000000000000..ff2bd685bced
--- /dev/null
+++ b/Documentation/mmc/mmc-dev-attrs.txt
@@ -0,0 +1,56 @@
+SD and MMC Device Attributes
+============================
+
+All attributes are read-only.
+
+	cid			Card Identifaction Register
+	csd			Card Specific Data Register
+	scr			SD Card Configuration Register (SD only)
+	date			Manufacturing Date (from CID Register)
+	fwrev			Firmware/Product Revision (from CID Register) (SD and MMCv1 only)
+	hwrev			Hardware/Product Revision (from CID Register) (SD and MMCv1 only)
+	manfid			Manufacturer ID (from CID Register)
+	name			Product Name (from CID Register)
+	oemid			OEM/Application ID (from CID Register)
+	serial			Product Serial Number (from CID Register)
+	erase_size		Erase group size
+	preferred_erase_size	Preferred erase size
+
+Note on Erase Size and Preferred Erase Size:
+
+	"erase_size" is the  minimum size, in bytes, of an erase
+	operation.  For MMC, "erase_size" is the erase group size
+	reported by the card.  Note that "erase_size" does not apply
+	to trim or secure trim operations where the minimum size is
+	always one 512 byte sector.  For SD, "erase_size" is 512
+	if the card is block-addressed, 0 otherwise.
+
+	SD/MMC cards can erase an arbitrarily large area up to and
+	including the whole card.  When erasing a large area it may
+	be desirable to do it in smaller chunks for three reasons:
+		1. A single erase command will make all other I/O on
+		the card wait.  This is not a problem if the whole card
+		is being erased, but erasing one partition will make
+		I/O for another partition on the same card wait for the
+		duration of the erase - which could be a several
+		minutes.
+		2. To be able to inform the user of erase progress.
+		3. The erase timeout becomes too large to be very
+		useful.  Because the erase timeout contains a margin
+		which is multiplied by the size of the erase area,
+		the value can end up being several minutes for large
+		areas.
+
+	"erase_size" is not the most efficient unit to erase
+	(especially for SD where it is just one sector),
+	hence "preferred_erase_size" provides a good chunk
+	size for erasing large areas.
+
+	For MMC, "preferred_erase_size" is the high-capacity
+	erase size if a card specifies one, otherwise it is
+	based on the capacity of the card.
+
+	For SD, "preferred_erase_size" is the allocation unit
+	size specified by the card.
+
+	"preferred_erase_size" is in bytes.
diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.txt
index 274821b35a7f..990efd7a9818 100644
--- a/Documentation/mtd/nand_ecc.txt
+++ b/Documentation/mtd/nand_ecc.txt
@@ -91,7 +91,7 @@ ECC 1   rp15  rp14  rp13  rp12  rp11  rp10  rp09  rp08
 ECC 2   cp5   cp4   cp3   cp2   cp1   cp0      1     1
 
 I detected after writing this that ST application note AN1823
-(http://www.st.com/stonline/books/pdf/docs/10123.pdf) gives a much
+(http://www.st.com/stonline/) gives a much
 nicer picture.(but they use line parity as term where I use row parity)
 Oh well, I'm graphically challenged, so suffer with me for a moment :-)
 And I could not reuse the ST picture anyway for copyright reasons.
diff --git a/Documentation/mutex-design.txt b/Documentation/mutex-design.txt
index c91ccc0720fa..38c10fd7f411 100644
--- a/Documentation/mutex-design.txt
+++ b/Documentation/mutex-design.txt
@@ -9,7 +9,7 @@ firstly, there's nothing wrong with semaphores. But if the simpler
 mutex semantics are sufficient for your code, then there are a couple
 of advantages of mutexes:
 
- - 'struct mutex' is smaller on most architectures: .e.g on x86,
+ - 'struct mutex' is smaller on most architectures: E.g. on x86,
    'struct semaphore' is 20 bytes, 'struct mutex' is 16 bytes.
    A smaller structure size means less RAM footprint, and better
    CPU-cache utilization.
@@ -136,3 +136,4 @@ the APIs of 'struct mutex' have been streamlined:
  void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
  int  mutex_lock_interruptible_nested(struct mutex *lock,
                                       unsigned int subclass);
+ int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);
diff --git a/Documentation/networking/3c509.txt b/Documentation/networking/3c509.txt
index 3c45d5dcd63b..dcc9eaf59395 100644
--- a/Documentation/networking/3c509.txt
+++ b/Documentation/networking/3c509.txt
@@ -31,7 +31,7 @@ models:
 Large portions of this documentation were heavily borrowed from the guide
 written the original author of the 3c509 driver, Donald Becker. The master
 copy of that document, which contains notes on older versions of the driver,
-currently resides on Scyld web server: http://www.scyld.com/network/3c509.html.
+currently resides on Scyld web server: http://www.scyld.com/.
 
 
 (1) Special Driver Features
diff --git a/Documentation/networking/README.ipw2100 b/Documentation/networking/README.ipw2100
index f3fcaa41f774..6f85e1d06031 100644
--- a/Documentation/networking/README.ipw2100
+++ b/Documentation/networking/README.ipw2100
@@ -72,8 +72,7 @@ such, if you are interested in deploying or shipping a driver as part of
 solution intended to be used for purposes other than development, please
 obtain a tested driver from Intel Customer Support at:
 
-http://support.intel.com/support/notebook/sb/CS-006408.htm
-
+http://www.intel.com/support/wireless/sb/CS-006408.htm
 
 1. Introduction
 -----------------------------------------------
diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200
index 80c728522c4c..616a8e540b0b 100644
--- a/Documentation/networking/README.ipw2200
+++ b/Documentation/networking/README.ipw2200
@@ -85,7 +85,7 @@ such, if you are interested in deploying or shipping a driver as part of
 solution intended to be used for purposes other than development, please 
 obtain a tested driver from Intel Customer Support at:
 
-http://support.intel.com/support/notebook/sb/CS-006408.htm
+http://support.intel.com
 
 
 1.   Introduction
@@ -171,7 +171,7 @@ Where the supported parameter are:
   
   led
 	Can be used to turn on experimental LED code.
-	0 = Off, 1 = On.  Default is 0.
+	0 = Off, 1 = On.  Default is 1.
 
   mode
 	Can be used to set the default mode of the adapter.  
diff --git a/Documentation/networking/README.sb1000 b/Documentation/networking/README.sb1000
index f82d42584e98..f92c2aac56a9 100644
--- a/Documentation/networking/README.sb1000
+++ b/Documentation/networking/README.sb1000
@@ -27,8 +27,8 @@ cable modem easy.
    in Franco's original source code distribution .tar.gz file.  Support for
    the sb1000 driver can be found at:
 
-      http://home.adelphia.net/~siglercm/sb1000.html
-      http://linuxpower.cx/~cable/
+      http://web.archive.org/web/*/http://home.adelphia.net/~siglercm/sb1000.html
+      http://web.archive.org/web/*/http://linuxpower.cx/~cable/
 
    along with these utilities.
 
diff --git a/Documentation/networking/arcnet.txt b/Documentation/networking/arcnet.txt
index 796012540386..9ff579502151 100644
--- a/Documentation/networking/arcnet.txt
+++ b/Documentation/networking/arcnet.txt
@@ -68,7 +68,7 @@ REAL NAME" to listserv@tichy.ch.uj.edu.pl.  Then, to submit messages to the
 list, mail to linux-arcnet@tichy.ch.uj.edu.pl.
 
 There are archives of the mailing list at:
-	http://tichy.ch.uj.edu.pl/lists/linux-arcnet
+	http://epistolary.org/mailman/listinfo.cgi/arcnet
 
 The people on linux-net@vger.kernel.org have also been known to be very
 helpful, especially when we're talking about ALPHA Linux kernels that may or
@@ -79,7 +79,7 @@ Other Drivers and Info
 ----------------------
 
 You can try my ARCNET page on the World Wide Web at:
-	http://www.worldvisions.ca/~apenwarr/arcnet/
+	http://www.qis.net/~jschmitz/arcnet/	
 
 Also, SMC (one of the companies that makes ARCnet cards) has a WWW site you
 might be interested in, which includes several drivers for various cards
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 61f516b135b4..5dc638791d97 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -49,6 +49,7 @@ Table of Contents
 3.3	Configuring Bonding Manually with Ifenslave
 3.3.1		Configuring Multiple Bonds Manually
 3.4	Configuring Bonding Manually via Sysfs
+3.5	Overriding Configuration for Special Cases
 
 4. Querying Bonding Configuration
 4.1	Bonding Configuration
@@ -764,6 +765,14 @@ xmit_hash_policy
 	does not exist, and the layer2 policy is the only policy.  The
 	layer2+3 value was added for bonding version 3.2.2.
 
+resend_igmp
+
+	Specifies the number of IGMP membership reports to be issued after
+	a failover event. One membership report is issued immediately after
+	the failover, subsequent packets are sent in each 200ms interval.
+
+	The valid range is 0 - 255; the default value is 1. This option
+	was added for bonding version 3.7.0.
 
 3. Configuring Bonding Devices
 ==============================
@@ -1318,8 +1327,87 @@ echo 2000 > /sys/class/net/bond1/bonding/arp_interval
 echo +eth2 > /sys/class/net/bond1/bonding/slaves
 echo +eth3 > /sys/class/net/bond1/bonding/slaves
 
-
-4. Querying Bonding Configuration 
+3.5 Overriding Configuration for Special Cases
+----------------------------------------------
+When using the bonding driver, the physical port which transmits a frame is
+typically selected by the bonding driver, and is not relevant to the user or
+system administrator.  The output port is simply selected using the policies of
+the selected bonding mode.  On occasion however, it is helpful to direct certain
+classes of traffic to certain physical interfaces on output to implement
+slightly more complex policies.  For example, to reach a web server over a
+bonded interface in which eth0 connects to a private network, while eth1
+connects via a public network, it may be desirous to bias the bond to send said
+traffic over eth0 first, using eth1 only as a fall back, while all other traffic
+can safely be sent over either interface.  Such configurations may be achieved
+using the traffic control utilities inherent in linux.
+
+By default the bonding driver is multiqueue aware and 16 queues are created
+when the driver initializes (see Documentation/networking/multiqueue.txt
+for details).  If more or less queues are desired the module parameter
+tx_queues can be used to change this value.  There is no sysfs parameter
+available as the allocation is done at module init time.
+
+The output of the file /proc/net/bonding/bondX has changed so the output Queue
+ID is now printed for each slave:
+
+Bonding Mode: fault-tolerance (active-backup)
+Primary Slave: None
+Currently Active Slave: eth0
+MII Status: up
+MII Polling Interval (ms): 0
+Up Delay (ms): 0
+Down Delay (ms): 0
+
+Slave Interface: eth0
+MII Status: up
+Link Failure Count: 0
+Permanent HW addr: 00:1a:a0:12:8f:cb
+Slave queue ID: 0
+
+Slave Interface: eth1
+MII Status: up
+Link Failure Count: 0
+Permanent HW addr: 00:1a:a0:12:8f:cc
+Slave queue ID: 2
+
+The queue_id for a slave can be set using the command:
+
+# echo "eth1:2" > /sys/class/net/bond0/bonding/queue_id
+
+Any interface that needs a queue_id set should set it with multiple calls
+like the one above until proper priorities are set for all interfaces.  On
+distributions that allow configuration via initscripts, multiple 'queue_id'
+arguments can be added to BONDING_OPTS to set all needed slave queues.
+
+These queue id's can be used in conjunction with the tc utility to configure
+a multiqueue qdisc and filters to bias certain traffic to transmit on certain
+slave devices.  For instance, say we wanted, in the above configuration to
+force all traffic bound to 192.168.1.100 to use eth1 in the bond as its output
+device. The following commands would accomplish this:
+
+# tc qdisc add dev bond0 handle 1 root multiq
+
+# tc filter add dev bond0 protocol ip parent 1: prio 1 u32 match ip dst \
+	192.168.1.100 action skbedit queue_mapping 2
+
+These commands tell the kernel to attach a multiqueue queue discipline to the
+bond0 interface and filter traffic enqueued to it, such that packets with a dst
+ip of 192.168.1.100 have their output queue mapping value overwritten to 2.
+This value is then passed into the driver, causing the normal output path
+selection policy to be overridden, selecting instead qid 2, which maps to eth1.
+
+Note that qid values begin at 1.  Qid 0 is reserved to initiate to the driver
+that normal output policy selection should take place.  One benefit to simply
+leaving the qid for a slave to 0 is the multiqueue awareness in the bonding
+driver that is now present.  This awareness allows tc filters to be placed on
+slave devices as well as bond devices and the bonding driver will simply act as
+a pass-through for selecting output queues on the slave device rather than 
+output port selection.
+
+This feature first appeared in bonding driver version 3.7.0 and support for
+output slave selection was limited to round-robin and active-backup modes.
+
+4 Querying Bonding Configuration
 =================================
 
 4.1 Bonding Configuration
@@ -2432,7 +2520,7 @@ be found at:
 https://lists.sourceforge.net/lists/listinfo/bonding-devel
 
 Donald Becker's Ethernet Drivers and diag programs may be found at :
- - http://www.scyld.com/network/
+ - http://web.archive.org/web/*/http://www.scyld.com/network/ 
 
 You will also find a lot of information regarding Ethernet, NWay, MII,
 etc. at www.scyld.com.
diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt
new file mode 100644
index 000000000000..61d7c9247453
--- /dev/null
+++ b/Documentation/networking/caif/spi_porting.txt
@@ -0,0 +1,208 @@
+- CAIF SPI porting -
+
+- CAIF SPI basics:
+
+Running CAIF over SPI needs some extra setup, owing to the nature of SPI.
+Two extra GPIOs have been added in order to negotiate the transfers
+ between the master and the slave. The minimum requirement for running
+CAIF over SPI is a SPI slave chip and two GPIOs (more details below).
+Please note that running as a slave implies that you need to keep up
+with the master clock. An overrun or underrun event is fatal.
+
+- CAIF SPI framework:
+
+To make porting as easy as possible, the CAIF SPI has been divided in
+two parts. The first part (called the interface part) deals with all
+generic functionality such as length framing, SPI frame negotiation
+and SPI frame delivery and transmission. The other part is the CAIF
+SPI slave device part, which is the module that you have to write if
+you want to run SPI CAIF on a new hardware. This part takes care of
+the physical hardware, both with regard to SPI and to GPIOs.
+
+- Implementing a CAIF SPI device:
+
+	- Functionality provided by the CAIF SPI slave device:
+
+	In order to implement a SPI device you will, as a minimum,
+	need to implement the following
+	functions:
+
+	int (*init_xfer) (struct cfspi_xfer * xfer, struct cfspi_dev *dev):
+
+	This function is called by the CAIF SPI interface to give
+	you a chance to set up your hardware to be ready to receive
+	a stream of data from the master. The xfer structure contains
+	both physical and logical adresses, as well as the total length
+	of the transfer in both directions.The dev parameter can be used
+	to map to different CAIF SPI slave devices.
+
+	void (*sig_xfer) (bool xfer, struct cfspi_dev *dev):
+
+	This function is called by the CAIF SPI interface when the output
+	(SPI_INT) GPIO needs to change state. The boolean value of the xfer
+	variable indicates whether the GPIO should be asserted (HIGH) or
+	deasserted (LOW). The dev parameter can be used to map to different CAIF
+	SPI slave devices.
+
+	- Functionality provided by the CAIF SPI interface:
+
+	void (*ss_cb) (bool assert, struct cfspi_ifc *ifc);
+
+	This function is called by the CAIF SPI slave device in order to
+	signal a change of state of the input GPIO (SS) to the interface.
+	Only active edges are mandatory to be reported.
+	This function can be called from IRQ context (recommended in order
+	not to introduce latency). The ifc parameter should be the pointer
+	returned from the platform probe function in the SPI device structure.
+
+	void (*xfer_done_cb) (struct cfspi_ifc *ifc);
+
+	This function is called by the CAIF SPI slave device in order to
+	report that a transfer is completed. This function should only be
+	called once both the transmission and the reception are completed.
+	This function can be called from IRQ context (recommended in order
+	not to introduce latency). The ifc parameter should be the pointer
+	returned from the platform probe function in the SPI device structure.
+
+	- Connecting the bits and pieces:
+
+		- Filling in the SPI slave device structure:
+
+		Connect the necessary callback functions.
+		Indicate clock speed (used to calculate toggle delays).
+		Chose a suitable name (helps debugging if you use several CAIF
+		SPI slave devices).
+		Assign your private data (can be used to map to your structure).
+
+		- Filling in the SPI slave platform device structure:
+		Add name of driver to connect to ("cfspi_sspi").
+		Assign the SPI slave device structure as platform data.
+
+- Padding:
+
+In order to optimize throughput, a number of SPI padding options are provided.
+Padding can be enabled independently for uplink and downlink transfers.
+Padding can be enabled for the head, the tail and for the total frame size.
+The padding needs to be correctly configured on both sides of the link.
+The padding can be changed via module parameters in cfspi_sspi.c or via
+the sysfs directory of the cfspi_sspi driver (before device registration).
+
+- CAIF SPI device template:
+
+/*
+ *	Copyright (C) ST-Ericsson AB 2010
+ *	Author: Daniel Martensson / Daniel.Martensson@stericsson.com
+ *	License terms: GNU General Public License (GPL), version 2.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <net/caif/caif_spi.h>
+
+MODULE_LICENSE("GPL");
+
+struct sspi_struct {
+	struct cfspi_dev sdev;
+	struct cfspi_xfer *xfer;
+};
+
+static struct sspi_struct slave;
+static struct platform_device slave_device;
+
+static irqreturn_t sspi_irq(int irq, void *arg)
+{
+	/* You only need to trigger on an edge to the active state of the
+	 * SS signal. Once a edge is detected, the ss_cb() function should be
+	 * called with the parameter assert set to true. It is OK
+	 * (and even advised) to call the ss_cb() function in IRQ context in
+	 * order not to add any delay. */
+
+	return IRQ_HANDLED;
+}
+
+static void sspi_complete(void *context)
+{
+	/* Normally the DMA or the SPI framework will call you back
+	 * in something similar to this. The only thing you need to
+	 * do is to call the xfer_done_cb() function, providing the pointer
+	 * to the CAIF SPI interface. It is OK to call this function
+	 * from IRQ context. */
+}
+
+static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev)
+{
+	/* Store transfer info. For a normal implementation you should
+	 * set up your DMA here and make sure that you are ready to
+	 * receive the data from the master SPI. */
+
+	struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
+
+	sspi->xfer = xfer;
+
+	return 0;
+}
+
+void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev)
+{
+	/* If xfer is true then you should assert the SPI_INT to indicate to
+	 * the master that you are ready to recieve the data from the master
+	 * SPI. If xfer is false then you should de-assert SPI_INT to indicate
+	 * that the transfer is done.
+	 */
+
+	struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
+}
+
+static void sspi_release(struct device *dev)
+{
+	/*
+	 * Here you should release your SPI device resources.
+	 */
+}
+
+static int __init sspi_init(void)
+{
+	/* Here you should initialize your SPI device by providing the
+	 * necessary functions, clock speed, name and private data. Once
+	 * done, you can register your device with the
+	 * platform_device_register() function. This function will return
+	 * with the CAIF SPI interface initialized. This is probably also
+	 * the place where you should set up your GPIOs, interrupts and SPI
+	 * resources. */
+
+	int res = 0;
+
+	/* Initialize slave device. */
+	slave.sdev.init_xfer = sspi_init_xfer;
+	slave.sdev.sig_xfer = sspi_sig_xfer;
+	slave.sdev.clk_mhz = 13;
+	slave.sdev.priv = &slave;
+	slave.sdev.name = "spi_sspi";
+	slave_device.dev.release = sspi_release;
+
+	/* Initialize platform device. */
+	slave_device.name = "cfspi_sspi";
+	slave_device.dev.platform_data = &slave.sdev;
+
+	/* Register platform device. */
+	res = platform_device_register(&slave_device);
+	if (res) {
+		printk(KERN_WARNING "sspi_init: failed to register dev.\n");
+		return -ENODEV;
+	}
+
+	return res;
+}
+
+static void __exit sspi_exit(void)
+{
+	platform_device_del(&slave_device);
+}
+
+module_init(sspi_init);
+module_exit(sspi_exit);
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index cd79735013f9..5b04b67ddca2 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -22,6 +22,7 @@ This file contains
       4.1.2 RAW socket option CAN_RAW_ERR_FILTER
       4.1.3 RAW socket option CAN_RAW_LOOPBACK
       4.1.4 RAW socket option CAN_RAW_RECV_OWN_MSGS
+      4.1.5 RAW socket returned message flags
     4.2 Broadcast Manager protocol sockets (SOCK_DGRAM)
     4.3 connected transport protocols (SOCK_SEQPACKET)
     4.4 unconnected transport protocols (SOCK_DGRAM)
@@ -471,6 +472,17 @@ solution for a couple of reasons:
     setsockopt(s, SOL_CAN_RAW, CAN_RAW_RECV_OWN_MSGS,
                &recv_own_msgs, sizeof(recv_own_msgs));
 
+  4.1.5 RAW socket returned message flags
+
+  When using recvmsg() call, the msg->msg_flags may contain following flags:
+
+    MSG_DONTROUTE: set when the received frame was created on the local host.
+
+    MSG_CONFIRM: set when the frame was sent via the socket it is received on.
+      This flag can be interpreted as a 'transmission confirmation' when the
+      CAN driver supports the echo of frames on driver level, see 3.2 and 6.2.
+      In order to receive such messages, CAN_RAW_RECV_OWN_MSGS must be set.
+
   4.2 Broadcast Manager protocol sockets (SOCK_DGRAM)
   4.3 connected transport protocols (SOCK_SEQPACKET)
   4.4 unconnected transport protocols (SOCK_DGRAM)
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index a62fdf7a6bff..271d524a4c8d 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -1,18 +1,20 @@
 DCCP protocol
-============
+=============
 
 
 Contents
 ========
-
 - Introduction
 - Missing features
 - Socket options
+- Sysctl variables
+- IOCTLs
+- Other tunables
 - Notes
 
+
 Introduction
 ============
-
 Datagram Congestion Control Protocol (DCCP) is an unreliable, connection
 oriented protocol designed to solve issues present in UDP and TCP, particularly
 for real-time and multimedia (streaming) traffic.
@@ -29,9 +31,9 @@ It has a base protocol and pluggable congestion control IDs (CCIDs).
 DCCP is a Proposed Standard (RFC 2026), and the homepage for DCCP as a protocol
 is at http://www.ietf.org/html.charters/dccp-charter.html
 
+
 Missing features
 ================
-
 The Linux DCCP implementation does not currently support all the features that are
 specified in RFCs 4340...42.
 
@@ -45,7 +47,6 @@ http://linux-net.osdl.org/index.php/DCCP_Testing#Experimental_DCCP_source_tree
 
 Socket options
 ==============
-
 DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
 service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
 the socket will fall back to 0 (which means that no meaningful service code
@@ -112,6 +113,7 @@ DCCP_SOCKOPT_CCID_TX_INFO
 On unidirectional connections it is useful to close the unused half-connection
 via shutdown (SHUT_WR or SHUT_RD): this will reduce per-packet processing costs.
 
+
 Sysctl variables
 ================
 Several DCCP default parameters can be managed by the following sysctls
@@ -155,15 +157,30 @@ sync_ratelimit = 125 ms
 	sequence-invalid packets on the same socket (RFC 4340, 7.5.4). The unit
 	of this parameter is milliseconds; a value of 0 disables rate-limiting.
 
+
 IOCTLS
 ======
 FIONREAD
 	Works as in udp(7): returns in the `int' argument pointer the size of
 	the next pending datagram in bytes, or 0 when no datagram is pending.
 
+
+Other tunables
+==============
+Per-route rto_min support
+	CCID-2 supports the RTAX_RTO_MIN per-route setting for the minimum value
+	of the RTO timer. This setting can be modified via the 'rto_min' option
+	of iproute2; for example:
+		> ip route change 10.0.0.0/24   rto_min 250j dev wlan0
+		> ip route add    10.0.0.254/32 rto_min 800j dev wlan0
+		> ip route show dev wlan0
+	CCID-3 also supports the rto_min setting: it is used to define the lower
+	bound for the expiry of the nofeedback timer. This can be useful on LANs
+	with very low RTTs (e.g., loopback, Gbit ethernet).
+
+
 Notes
 =====
-
 DCCP does not travel through NAT successfully at present on many boxes. This is
 because the checksum covers the pseudo-header as per TCP and UDP. Linux NAT
 support for DCCP has been added.
diff --git a/Documentation/networking/decnet.txt b/Documentation/networking/decnet.txt
index d8968958d839..e12a4900cf72 100644
--- a/Documentation/networking/decnet.txt
+++ b/Documentation/networking/decnet.txt
@@ -4,7 +4,7 @@
 1) Other documentation....
 
    o Project Home Pages
-       http://www.chygwyn.com/DECnet/                      - Kernel info
+       http://www.chygwyn.com/                      	    - Kernel info
        http://linux-decnet.sourceforge.net/                - Userland tools
        http://www.sourceforge.net/projects/linux-decnet/   - Status page
 
diff --git a/Documentation/networking/dns_resolver.txt b/Documentation/networking/dns_resolver.txt
new file mode 100644
index 000000000000..aefd1e681804
--- /dev/null
+++ b/Documentation/networking/dns_resolver.txt
@@ -0,0 +1,146 @@
+			     ===================
+			     DNS Resolver Module
+			     ===================
+
+Contents:
+
+ - Overview.
+ - Compilation.
+ - Setting up.
+ - Usage.
+ - Mechanism.
+ - Debugging.
+
+
+========
+OVERVIEW
+========
+
+The DNS resolver module provides a way for kernel services to make DNS queries
+by way of requesting a key of key type dns_resolver.  These queries are
+upcalled to userspace through /sbin/request-key.
+
+These routines must be supported by userspace tools dns.upcall, cifs.upcall and
+request-key.  It is under development and does not yet provide the full feature
+set.  The features it does support include:
+
+ (*) Implements the dns_resolver key_type to contact userspace.
+
+It does not yet support the following AFS features:
+
+ (*) Dns query support for AFSDB resource record.
+
+This code is extracted from the CIFS filesystem.
+
+
+===========
+COMPILATION
+===========
+
+The module should be enabled by turning on the kernel configuration options:
+
+	CONFIG_DNS_RESOLVER	- tristate "DNS Resolver support"
+
+
+==========
+SETTING UP
+==========
+
+To set up this facility, the /etc/request-key.conf file must be altered so that
+/sbin/request-key can appropriately direct the upcalls.  For example, to handle
+basic dname to IPv4/IPv6 address resolution, the following line should be
+added:
+
+	#OP	TYPE		DESC	CO-INFO	PROGRAM ARG1 ARG2 ARG3 ...
+	#======	============	=======	=======	==========================
+	create	dns_resolver  	*	*	/usr/sbin/cifs.upcall %k
+
+To direct a query for query type 'foo', a line of the following should be added
+before the more general line given above as the first match is the one taken.
+
+	create	dns_resolver  	foo:*	*	/usr/sbin/dns.foo %k
+
+
+
+=====
+USAGE
+=====
+
+To make use of this facility, one of the following functions that are
+implemented in the module can be called after doing:
+
+	#include <linux/dns_resolver.h>
+
+ (1) int dns_query(const char *type, const char *name, size_t namelen,
+		   const char *options, char **_result, time_t *_expiry);
+
+     This is the basic access function.  It looks for a cached DNS query and if
+     it doesn't find it, it upcalls to userspace to make a new DNS query, which
+     may then be cached.  The key description is constructed as a string of the
+     form:
+
+		[<type>:]<name>
+
+     where <type> optionally specifies the particular upcall program to invoke,
+     and thus the type of query to do, and <name> specifies the string to be
+     looked up.  The default query type is a straight hostname to IP address
+     set lookup.
+
+     The name parameter is not required to be a NUL-terminated string, and its
+     length should be given by the namelen argument.
+
+     The options parameter may be NULL or it may be a set of options
+     appropriate to the query type.
+
+     The return value is a string appropriate to the query type.  For instance,
+     for the default query type it is just a list of comma-separated IPv4 and
+     IPv6 addresses.  The caller must free the result.
+
+     The length of the result string is returned on success, and a negative
+     error code is returned otherwise.  -EKEYREJECTED will be returned if the
+     DNS lookup failed.
+
+     If _expiry is non-NULL, the expiry time (TTL) of the result will be
+     returned also.
+
+
+=========
+MECHANISM
+=========
+
+The dnsresolver module registers a key type called "dns_resolver".  Keys of
+this type are used to transport and cache DNS lookup results from userspace.
+
+When dns_query() is invoked, it calls request_key() to search the local
+keyrings for a cached DNS result.  If that fails to find one, it upcalls to
+userspace to get a new result.
+
+Upcalls to userspace are made through the request_key() upcall vector, and are
+directed by means of configuration lines in /etc/request-key.conf that tell
+/sbin/request-key what program to run to instantiate the key.
+
+The upcall handler program is responsible for querying the DNS, processing the
+result into a form suitable for passing to the keyctl_instantiate_key()
+routine.  This then passes the data to dns_resolver_instantiate() which strips
+off and processes any options included in the data, and then attaches the
+remainder of the string to the key as its payload.
+
+The upcall handler program should set the expiry time on the key to that of the
+lowest TTL of all the records it has extracted a result from.  This means that
+the key will be discarded and recreated when the data it holds has expired.
+
+dns_query() returns a copy of the value attached to the key, or an error if
+that is indicated instead.
+
+See <file:Documentation/keys-request-key.txt> for further information about
+request-key function.
+
+
+=========
+DEBUGGING
+=========
+
+Debugging messages can be turned on dynamically by writing a 1 into the
+following file:
+
+        /sys/module/dnsresolver/parameters/debug
diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index 2df71861e578..d9271e74e488 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -1,82 +1,35 @@
 Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
 ===============================================================
 
-September 26, 2006
-
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
 
 Contents
 ========
 
-- In This Release
 - Identifying Your Adapter
-- Building and Installation
 - Command Line Parameters
 - Speed and Duplex Configuration
 - Additional Configurations
-- Known Issues
 - Support
 
-
-In This Release
-===============
-
-This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
-of Adapters.  This driver includes support for Itanium(R)2-based systems.
-
-For questions related to hardware requirements, refer to the documentation
-supplied with your Intel PRO/1000 adapter. All hardware requirements listed
-apply to use with Linux.
-
-The following features are now available in supported kernels:
- - Native VLANs
- - Channel Bonding (teaming)
- - SNMP
-
-Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.txt
-
-The driver information previously displayed in the /proc filesystem is not
-supported in this release.  Alternatively, you can use ethtool (version 1.6
-or later), lspci, and ifconfig to obtain the same information.
-
-Instructions on updating ethtool can be found in the section "Additional
-Configurations" later in this document.
-
-NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100
-support.
-
-
 Identifying Your Adapter
 ========================
 
 For more information on how to identify your adapter, go to the Adapter &
 Driver ID Guide at:
 
-    http://support.intel.com/support/network/adapter/pro100/21397.htm
+    http://support.intel.com/support/go/network/adapter/idguide.htm
 
 For the latest Intel network drivers for Linux, refer to the following
 website.  In the search field, enter your adapter name or type, or use the
 networking link on the left to search for your adapter:
 
-    http://downloadfinder.intel.com/scripts-df/support_intel.asp
-
+    http://support.intel.com/support/go/network/adapter/home.htm
 
 Command Line Parameters
 =======================
 
-If the driver is built as a module, the  following optional parameters
-are used by entering them on the command line with the modprobe command
-using this syntax:
-
-     modprobe e1000 [<option>=<VAL1>,<VAL2>,...]
-
-For example, with two PRO/1000 PCI adapters, entering:
-
-     modprobe e1000 TxDescriptors=80,128
-
-loads the e1000 driver with 80 TX descriptors for the first adapter and
-128 TX descriptors for the second adapter.
-
 The default value for each parameter is generally the recommended setting,
 unless otherwise noted.
 
@@ -89,10 +42,6 @@ NOTES:  For more information about the AutoNeg, Duplex, and Speed
         parameters, see the application note at:
         http://www.intel.com/design/network/applnots/ap450.htm
 
-        A descriptor describes a data buffer and attributes related to
-        the data buffer.  This information is accessed by the hardware.
-
-
 AutoNeg
 -------
 (Supported only on adapters with copper connections)
@@ -106,7 +55,6 @@ Duplex parameters must not be specified.
 NOTE:  Refer to the Speed and Duplex section of this readme for more
        information on the AutoNeg parameter.
 
-
 Duplex
 ------
 (Supported only on adapters with copper connections)
@@ -119,7 +67,6 @@ set to auto-negotiate, the board auto-detects the correct duplex.  If the
 link partner is forced (either full or half), Duplex defaults to half-
 duplex.
 
-
 FlowControl
 -----------
 Valid Range:   0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
@@ -128,16 +75,16 @@ Default Value: Reads flow control settings from the EEPROM
 This parameter controls the automatic generation(Tx) and response(Rx)
 to Ethernet PAUSE frames.
 
-
 InterruptThrottleRate
 ---------------------
 (not supported on Intel(R) 82542, 82543 or 82544-based adapters)
-Valid Range:   0,1,3,100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+Valid Range:   0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+                                   4=simplified balancing)
 Default Value: 3
 
 The driver can limit the amount of interrupts per second that the adapter
-will generate for incoming packets. It does this by writing a value to the 
-adapter that is based on the maximum amount of interrupts that the adapter 
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
 will generate per second.
 
 Setting InterruptThrottleRate to a value greater or equal to 100
@@ -146,37 +93,43 @@ per second, even if more packets have come in. This reduces interrupt
 load on the system and can lower CPU utilization under heavy load,
 but will increase latency as packets are not processed as quickly.
 
-The default behaviour of the driver previously assumed a static 
-InterruptThrottleRate value of 8000, providing a good fallback value for 
-all traffic types,but lacking in small packet performance and latency. 
-The hardware can handle many more small packets per second however, and 
+The default behaviour of the driver previously assumed a static
+InterruptThrottleRate value of 8000, providing a good fallback value for
+all traffic types,but lacking in small packet performance and latency.
+The hardware can handle many more small packets per second however, and
 for this reason an adaptive interrupt moderation algorithm was implemented.
 
 Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which
-it dynamically adjusts the InterruptThrottleRate value based on the traffic 
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
 that it receives. After determining the type of incoming traffic in the last
-timeframe, it will adjust the InterruptThrottleRate to an appropriate value 
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
 for that traffic.
 
 The algorithm classifies the incoming traffic every interval into
-classes.  Once the class is determined, the InterruptThrottleRate value is 
-adjusted to suit that traffic type the best. There are three classes defined: 
+classes.  Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
 "Bulk traffic", for large amounts of packets of normal size; "Low latency",
 for small amounts of traffic and/or a significant percentage of small
-packets; and "Lowest latency", for almost completely small packets or 
+packets; and "Lowest latency", for almost completely small packets or
 minimal traffic.
 
-In dynamic conservative mode, the InterruptThrottleRate value is set to 4000 
-for traffic that falls in class "Bulk traffic". If traffic falls in the "Low 
-latency" or "Lowest latency" class, the InterruptThrottleRate is increased 
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
 stepwise to 20000. This default mode is suitable for most applications.
 
 For situations where low latency is vital such as cluster or
 grid computing, the algorithm can reduce latency even more when
 InterruptThrottleRate is set to mode 1. In this mode, which operates
-the same as mode 3, the InterruptThrottleRate will be increased stepwise to 
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
 70000 for traffic in class "Lowest latency".
 
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic.  If the bytes per second rate is approximately equal, the
+interrupt rate will drop as low as 2000 interrupts per second.  If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
 Setting InterruptThrottleRate to 0 turns off any interrupt moderation
 and may improve small packet latency, but is generally not suitable
 for bulk throughput traffic.
@@ -212,8 +165,6 @@ NOTE:  When e1000 is loaded with default settings and multiple adapters
        be platform-specific.  If CPU utilization is not a concern, use
        RX_POLLING (NAPI) and default driver settings.
 
-
-
 RxDescriptors
 -------------
 Valid Range:   80-256 for 82542 and 82543-based adapters
@@ -225,15 +176,14 @@ by the driver.  Increasing this value allows the driver to buffer more
 incoming packets, at the expense of increased system memory utilization.
 
 Each descriptor is 16 bytes.  A receive buffer is also allocated for each
-descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending 
+descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
 on the MTU setting. The maximum MTU size is 16110.
 
-NOTE:  MTU designates the frame size.  It only needs to be set for Jumbo 
-       Frames.  Depending on the available system resources, the request 
-       for a higher number of receive descriptors may be denied.  In this 
+NOTE:  MTU designates the frame size.  It only needs to be set for Jumbo
+       Frames.  Depending on the available system resources, the request
+       for a higher number of receive descriptors may be denied.  In this
        case, use a lower number.
 
-
 RxIntDelay
 ----------
 Valid Range:   0-65535 (0=off)
@@ -254,7 +204,6 @@ CAUTION:  When setting RxIntDelay to a value other than 0, adapters may
           restoring the network connection.  To eliminate the potential
           for the hang ensure that RxIntDelay is set to 0.
 
-
 RxAbsIntDelay
 -------------
 (This parameter is supported only on 82540, 82545 and later adapters.)
@@ -268,7 +217,6 @@ packet is received within the set amount of time.  Proper tuning,
 along with RxIntDelay, may improve traffic throughput in specific network
 conditions.
 
-
 Speed
 -----
 (This parameter is supported only on adapters with copper connections.)
@@ -280,7 +228,6 @@ Speed forces the line speed to the specified value in megabits per second
 partner is set to auto-negotiate, the board will auto-detect the correct
 speed.  Duplex should also be set when Speed is set to either 10 or 100.
 
-
 TxDescriptors
 -------------
 Valid Range:   80-256 for 82542 and 82543-based adapters
@@ -295,6 +242,36 @@ NOTE:  Depending on the available system resources, the request for a
        higher number of transmit descriptors may be denied.  In this case,
        use a lower number.
 
+TxDescriptorStep
+----------------
+Valid Range:    1 (use every Tx Descriptor)
+		4 (use every 4th Tx Descriptor)
+
+Default Value:  1 (use every Tx Descriptor)
+
+On certain non-Intel architectures, it has been observed that intense TX
+traffic bursts of short packets may result in an improper descriptor
+writeback. If this occurs, the driver will report a "TX Timeout" and reset
+the adapter, after which the transmit flow will restart, though data may
+have stalled for as much as 10 seconds before it resumes.
+
+The improper writeback does not occur on the first descriptor in a system
+memory cache-line, which is typically 32 bytes, or 4 descriptors long.
+
+Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors
+are aligned to the start of a system memory cache line, and so this problem
+will not occur.
+
+NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of
+       TxDescriptors available for transmits to 1/4 of the normal allocation.
+       This has a possible negative performance impact, which may be
+       compensated for by allocating more descriptors using the TxDescriptors
+       module parameter.
+
+       There are other conditions which may result in "TX Timeout", which will
+       not be resolved by the use of the TxDescriptorStep parameter. As the
+       issue addressed by this parameter has never been observed on Intel
+       Architecture platforms, it should not be used on Intel platforms.
 
 TxIntDelay
 ----------
@@ -307,7 +284,6 @@ efficiency if properly tuned for specific network traffic.  If the
 system is reporting dropped transmits, this value may be set too high
 causing the driver to run out of available transmit descriptors.
 
-
 TxAbsIntDelay
 -------------
 (This parameter is supported only on 82540, 82545 and later adapters.)
@@ -330,6 +306,35 @@ Default Value: 1
 A value of '1' indicates that the driver should enable IP checksum
 offload for received packets (both UDP and TCP) to the adapter hardware.
 
+Copybreak
+---------
+Valid Range:   0-xxxxxxx (0=off)
+Default Value: 256
+Usage: insmod e1000.ko copybreak=128
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value:  0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can turn off
+this parameter in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
 
 Speed and Duplex Configuration
 ==============================
@@ -385,40 +390,9 @@ If the link partner is forced to a specific speed and duplex, then this
 parameter should not be used.  Instead, use the Speed and Duplex parameters
 previously mentioned to force the adapter to the same speed and duplex.
 
-
 Additional Configurations
 =========================
 
-  Configuring the Driver on Different Distributions
-  -------------------------------------------------
-  Configuring a network driver to load properly when the system is started
-  is distribution dependent.  Typically, the configuration process involves
-  adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
-  as editing other system startup scripts and/or configuration files.  Many
-  popular Linux distributions ship with tools to make these changes for you.
-  To learn the proper way to configure a network device for your system,
-  refer to your distribution documentation.  If during this process you are
-  asked for the driver or module name, the name for the Linux Base Driver
-  for the Intel(R) PRO/1000 Family of Adapters is e1000.
-
-  As an example, if you install the e1000 driver for two PRO/1000 adapters
-  (eth0 and eth1) and set the speed and duplex to 10full and 100half, add
-  the following to modules.conf or or modprobe.conf:
-
-       alias eth0 e1000
-       alias eth1 e1000
-       options e1000 Speed=10,100 Duplex=2,1
-
-  Viewing Link Messages
-  ---------------------
-  Link messages will not be displayed to the console if the distribution is
-  restricting system messages.  In order to see network driver link messages
-  on your console, set dmesg to eight by entering the following:
-
-       dmesg -n 8
-
-  NOTE: This setting is not saved across reboots.
-
   Jumbo Frames
   ------------
   Jumbo Frames support is enabled by changing the MTU to a value larger than
@@ -437,9 +411,11 @@ Additional Configurations
    setting in a different location.
 
   Notes:
-
-  - To enable Jumbo Frames, increase the MTU size on the interface beyond
-    1500.
+  Degradation in throughput performance may be observed in some Jumbo frames
+  environments. If this is observed, increasing the application's socket buffer
+  size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
+  See the specific application manual and /usr/src/linux*/Documentation/
+  networking/ip-sysctl.txt for more details.
 
   - The maximum MTU setting for Jumbo Frames is 16110.  This value coincides
     with the maximum Jumbo Frames size of 16128.
@@ -447,40 +423,11 @@ Additional Configurations
   - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
     loss of link.
 
-  - Some Intel gigabit adapters that support Jumbo Frames have a frame size
-    limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
-    The adapters with this limitation are based on the Intel(R) 82571EB,
-    82572EI, 82573L and 80003ES2LAN controller.  These correspond to the
-    following product names:
-     Intel(R) PRO/1000 PT Server Adapter
-     Intel(R) PRO/1000 PT Desktop Adapter
-     Intel(R) PRO/1000 PT Network Connection
-     Intel(R) PRO/1000 PT Dual Port Server Adapter
-     Intel(R) PRO/1000 PT Dual Port Network Connection
-     Intel(R) PRO/1000 PF Server Adapter
-     Intel(R) PRO/1000 PF Network Connection
-     Intel(R) PRO/1000 PF Dual Port Server Adapter
-     Intel(R) PRO/1000 PB Server Connection
-     Intel(R) PRO/1000 PL Network Connection
-     Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
-     Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration
-     Intel(R) PRO/1000 PT Quad Port Server Adapter
-
   - Adapters based on the Intel(R) 82542 and 82573V/E controller do not
     support Jumbo Frames. These correspond to the following product names:
      Intel(R) PRO/1000 Gigabit Server Adapter
      Intel(R) PRO/1000 PM Network Connection
 
-  - The following adapters do not support Jumbo Frames:
-     Intel(R) 82562V 10/100 Network Connection
-     Intel(R) 82566DM Gigabit Network Connection
-     Intel(R) 82566DC Gigabit Network Connection
-     Intel(R) 82566MM Gigabit Network Connection
-     Intel(R) 82566MC Gigabit Network Connection
-     Intel(R) 82562GT 10/100 Network Connection
-     Intel(R) 82562G 10/100 Network Connection
-
-
   Ethtool
   -------
   The driver utilizes the ethtool interface for driver configuration and
@@ -490,142 +437,14 @@ Additional Configurations
   The latest release of ethtool can be found from
   http://sourceforge.net/projects/gkernel.
 
-  NOTE: Ethtool 1.6 only supports a limited set of ethtool options.  Support
-  for a more complete ethtool feature set can be enabled by upgrading
-  ethtool to ethtool-1.8.1.
-
   Enabling Wake on LAN* (WoL)
   ---------------------------
-  WoL is configured through the Ethtool* utility.  Ethtool is included with
-  all versions of Red Hat after Red Hat 7.2.  For other Linux distributions,
-  download and install Ethtool from the following website:
-  http://sourceforge.net/projects/gkernel.
-
-  For instructions on enabling WoL with Ethtool, refer to the website listed
-  above.
+  WoL is configured through the Ethtool* utility.
 
   WoL will be enabled on the system during the next shut down or reboot.
   For this driver version, in order to enable WoL, the e1000 driver must be
   loaded when shutting down or rebooting the system.
 
-  Wake On LAN is only supported on port A for the following devices:
-  Intel(R) PRO/1000 PT Dual Port Network Connection
-  Intel(R) PRO/1000 PT Dual Port Server Connection
-  Intel(R) PRO/1000 PT Dual Port Server Adapter
-  Intel(R) PRO/1000 PF Dual Port Server Adapter
-  Intel(R) PRO/1000 PT Quad Port Server Adapter
-
-  NAPI
-  ----
-  NAPI (Rx polling mode) is enabled in the e1000 driver.
-
-  See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
-
-
-Known Issues
-============
-
-Dropped Receive Packets on Half-duplex 10/100 Networks
-------------------------------------------------------
-If you have an Intel PCI Express adapter running at 10mbps or 100mbps, half-
-duplex, you may observe occasional dropped receive packets.  There are no
-workarounds for this problem in this network configuration.  The network must
-be updated to operate in full-duplex, and/or 1000mbps only.
-
-Jumbo Frames System Requirement
--------------------------------
-Memory allocation failures have been observed on Linux systems with 64 MB
-of RAM or less that are running Jumbo Frames.  If you are using Jumbo
-Frames, your system may require more than the advertised minimum
-requirement of 64 MB of system memory.
-
-Performance Degradation with Jumbo Frames
------------------------------------------
-Degradation in throughput performance may be observed in some Jumbo frames
-environments.  If this is observed, increasing the application's socket
-buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
-may help.  See the specific application manual and
-/usr/src/linux*/Documentation/
-networking/ip-sysctl.txt for more details.
-
-Jumbo Frames on Foundry BigIron 8000 switch
--------------------------------------------
-There is a known issue using Jumbo frames when connected to a Foundry
-BigIron 8000 switch.  This is a 3rd party limitation.  If you experience
-loss of packets, lower the MTU size.
-
-Allocating Rx Buffers when Using Jumbo Frames 
----------------------------------------------
-Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if 
-the available memory is heavily fragmented. This issue may be seen with PCI-X 
-adapters or with packet split disabled. This can be reduced or eliminated 
-by changing the amount of available memory for receive buffer allocation, by
-increasing /proc/sys/vm/min_free_kbytes. 
-
-Multiple Interfaces on Same Ethernet Broadcast Network
-------------------------------------------------------
-Due to the default ARP behavior on Linux, it is not possible to have
-one system on two IP networks in the same Ethernet broadcast domain
-(non-partitioned switch) behave as expected.  All Ethernet interfaces
-will respond to IP traffic for any IP address assigned to the system.
-This results in unbalanced receive traffic.
-
-If you have multiple interfaces in a server, either turn on ARP
-filtering by entering:
-
-    echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
-(this only works if your kernel's version is higher than 2.4.5),
-
-NOTE: This setting is not saved across reboots.  The configuration
-change can be made permanent by adding the line:
-    net.ipv4.conf.all.arp_filter = 1
-to the file /etc/sysctl.conf
-
-      or,
-
-install the interfaces in separate broadcast domains (either in
-different switches or in a switch partitioned to VLANs).
-
-82541/82547 can't link or are slow to link with some link partners
------------------------------------------------------------------
-There is a known compatibility issue with 82541/82547 and some
-low-end switches where the link will not be established, or will
-be slow to establish.  In particular, these switches are known to
-be incompatible with 82541/82547:
-
-    Planex FXG-08TE
-    I-O Data ETG-SH8
-
-To workaround this issue, the driver can be compiled with an override
-of the PHY's master/slave setting.  Forcing master or forcing slave
-mode will improve time-to-link.
-
-    # make CFLAGS_EXTRA=-DE1000_MASTER_SLAVE=<n>
-
-Where <n> is:
-
-    0 = Hardware default
-    1 = Master mode
-    2 = Slave mode
-    3 = Auto master/slave
-
-Disable rx flow control with ethtool
-------------------------------------
-In order to disable receive flow control using ethtool, you must turn
-off auto-negotiation on the same command line.
-
-For example:
-
-   ethtool -A eth? autoneg off rx off
-
-Unplugging network cable while ethtool -p is running
-----------------------------------------------------
-In kernel versions 2.5.50 and later (including 2.6 kernel), unplugging
-the network cable while ethtool -p is running will cause the system to
-become unresponsive to keyboard commands, except for control-alt-delete.
-Restarting the system appears to be the only remedy.
-
-
 Support
 =======
 
diff --git a/Documentation/networking/e1000e.txt b/Documentation/networking/e1000e.txt
new file mode 100644
index 000000000000..6aa048badf32
--- /dev/null
+++ b/Documentation/networking/e1000e.txt
@@ -0,0 +1,302 @@
+Linux* Driver for Intel(R) Network Connection
+===============================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Command Line Parameters
+- Additional Configurations
+- Support
+
+Identifying Your Adapter
+========================
+
+The e1000e driver supports all PCI Express Intel(R) Gigabit Network
+Connections, except those that are 82575, 82576 and 82580-based*.
+
+* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by
+  the e1000 driver, not the e1000e driver due to the 82546 part being used
+  behind a PCI Express bridge.
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+    http://support.intel.com/support/go/network/adapter/idguide.htm
+
+For the latest Intel network drivers for Linux, refer to the following
+website.  In the search field, enter your adapter name or type, or use the
+networking link on the left to search for your adapter:
+
+    http://support.intel.com/support/go/network/adapter/home.htm
+
+Command Line Parameters
+=======================
+
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+NOTES:  For more information about the InterruptThrottleRate,
+        RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
+        parameters, see the application note at:
+        http://www.intel.com/design/network/applnots/ap450.htm
+
+InterruptThrottleRate
+---------------------
+Valid Range:   0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+                                   4=simplified balancing)
+Default Value: 3
+
+The driver can limit the amount of interrupts per second that the adapter
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
+will generate per second.
+
+Setting InterruptThrottleRate to a value greater or equal to 100
+will program the adapter to send out a maximum of that many interrupts
+per second, even if more packets have come in. This reduces interrupt
+load on the system and can lower CPU utilization under heavy load,
+but will increase latency as packets are not processed as quickly.
+
+The driver has two adaptive modes (setting 1 or 3) in which
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
+that it receives. After determining the type of incoming traffic in the last
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
+for that traffic.
+
+The algorithm classifies the incoming traffic every interval into
+classes.  Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
+"Bulk traffic", for large amounts of packets of normal size; "Low latency",
+for small amounts of traffic and/or a significant percentage of small
+packets; and "Lowest latency", for almost completely small packets or
+minimal traffic.
+
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
+stepwise to 20000. This default mode is suitable for most applications.
+
+For situations where low latency is vital such as cluster or
+grid computing, the algorithm can reduce latency even more when
+InterruptThrottleRate is set to mode 1. In this mode, which operates
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
+70000 for traffic in class "Lowest latency".
+
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic.  If the bytes per second rate is approximately equal the
+interrupt rate will drop as low as 2000 interrupts per second.  If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
+Setting InterruptThrottleRate to 0 turns off any interrupt moderation
+and may improve small packet latency, but is generally not suitable
+for bulk throughput traffic.
+
+NOTE:  InterruptThrottleRate takes precedence over the TxAbsIntDelay and
+       RxAbsIntDelay parameters.  In other words, minimizing the receive
+       and/or transmit absolute delays does not force the controller to
+       generate more interrupts than what the Interrupt Throttle Rate
+       allows.
+
+NOTE:  When e1000e is loaded with default settings and multiple adapters
+       are in use simultaneously, the CPU utilization may increase non-
+       linearly.  In order to limit the CPU utilization without impacting
+       the overall throughput, we recommend that you load the driver as
+       follows:
+
+           modprobe e1000e InterruptThrottleRate=3000,3000,3000
+
+       This sets the InterruptThrottleRate to 3000 interrupts/sec for
+       the first, second, and third instances of the driver.  The range
+       of 2000 to 3000 interrupts per second works on a majority of
+       systems and is a good starting point, but the optimal value will
+       be platform-specific.  If CPU utilization is not a concern, use
+       RX_POLLING (NAPI) and default driver settings.
+
+RxIntDelay
+----------
+Valid Range:   0-65535 (0=off)
+Default Value: 0
+
+This value delays the generation of receive interrupts in units of 1.024
+microseconds.  Receive interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic.  Increasing this value adds
+extra latency to frame reception and can end up decreasing the throughput
+of TCP traffic.  If the system is reporting dropped receives, this value
+may be set too high, causing the driver to run out of available receive
+descriptors.
+
+CAUTION:  When setting RxIntDelay to a value other than 0, adapters may
+          hang (stop transmitting) under certain network conditions.  If
+          this occurs a NETDEV WATCHDOG message is logged in the system
+          event log.  In addition, the controller is automatically reset,
+          restoring the network connection.  To eliminate the potential
+          for the hang ensure that RxIntDelay is set to 0.
+
+RxAbsIntDelay
+-------------
+Valid Range:   0-65535 (0=off)
+Default Value: 8
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+receive interrupt is generated.  Useful only if RxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is received within the set amount of time.  Proper tuning,
+along with RxIntDelay, may improve traffic throughput in specific network
+conditions.
+
+TxIntDelay
+----------
+Valid Range:   0-65535 (0=off)
+Default Value: 8
+
+This value delays the generation of transmit interrupts in units of
+1.024 microseconds.  Transmit interrupt reduction can improve CPU
+efficiency if properly tuned for specific network traffic.  If the
+system is reporting dropped transmits, this value may be set too high
+causing the driver to run out of available transmit descriptors.
+
+TxAbsIntDelay
+-------------
+Valid Range:   0-65535 (0=off)
+Default Value: 32
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+transmit interrupt is generated.  Useful only if TxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is sent on the wire within the set amount of time.  Proper tuning,
+along with TxIntDelay, may improve traffic throughput in specific
+network conditions.
+
+Copybreak
+---------
+Valid Range:   0-xxxxxxx (0=off)
+Default Value: 256
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000e/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value:  0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can set this parameter
+in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
+
+IntMode
+-------
+Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X)
+Default Value: 2
+
+Allows changing the interrupt mode at module load time, without requiring a
+recompile. If the driver load fails to enable a specific interrupt mode, the
+driver will try other interrupt modes, from least to most compatible.  The
+interrupt order is MSI-X, MSI, Legacy.  If specifying MSI (IntMode=1)
+interrupts, only MSI and Legacy will be attempted.
+
+CrcStripping
+------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Strip the CRC from received packets before sending up the network stack.  If
+you have a machine with a BMC enabled but cannot receive IPMI traffic after
+loading or enabling the driver, try disabling this feature.
+
+WriteProtectNVM
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Set the hardware to ignore all write/erase cycles to the GbE region in the
+ICHx NVM (non-volatile memory).  This feature can be disabled by the
+WriteProtectNVM module parameter (enabled by default) only after a hardware
+reset, but the machine must be power cycled before trying to enable writes.
+
+Note: the kernel boot option iomem=relaxed may need to be set if the kernel
+config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the
+NVM from user space via ethtool.
+
+Additional Configurations
+=========================
+
+  Jumbo Frames
+  ------------
+  Jumbo Frames support is enabled by changing the MTU to a value larger than
+  the default of 1500.  Use the ifconfig command to increase the MTU size.
+  For example:
+
+       ifconfig eth<x> mtu 9000 up
+
+  This setting is not saved across reboots.
+
+  Notes:
+
+  - The maximum MTU setting for Jumbo Frames is 9216.  This value coincides
+    with the maximum Jumbo Frames size of 9234 bytes.
+
+  - Using Jumbo Frames at 10 or 100 Mbps is not supported and may result in
+    poor performance or loss of link.
+
+  - Some adapters limit Jumbo Frames sized packets to a maximum of
+    4096 bytes and some adapters do not support Jumbo Frames.
+
+
+  Ethtool
+  -------
+  The driver utilizes the ethtool interface for driver configuration and
+  diagnostics, as well as displaying statistical information.  We
+  strongly recommend downloading the latest version of Ethtool at:
+
+  http://sourceforge.net/projects/gkernel.
+
+  Speed and Duplex
+  ----------------
+  Speed and Duplex are configured through the Ethtool* utility. For
+  instructions,  refer to the Ethtool man page.
+
+  Enabling Wake on LAN* (WoL)
+  ---------------------------
+  WoL is configured through the Ethtool* utility. For instructions on
+  enabling WoL with Ethtool, refer to the Ethtool man page.
+
+  WoL will be enabled on the system during the next shut down or reboot.
+  For this driver version, in order to enable WoL, the e1000e driver must be
+  loaded when shutting down or rebooting the system.
+
+  In most cases Wake On LAN is only supported on port A for multiple port
+  adapters. To verify if a port supports Wake on LAN run ethtool eth<X>.
+
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/fore200e.txt b/Documentation/networking/fore200e.txt
index b1f337f0f4ca..6e0d2a9613ec 100644
--- a/Documentation/networking/fore200e.txt
+++ b/Documentation/networking/fore200e.txt
@@ -39,7 +39,7 @@ version. Alternative binary firmware images can be found somewhere on the
 ForeThought CD-ROM supplied with your adapter by FORE Systems.
 
 You can also get the latest firmware images from FORE Systems at
-http://www.fore.com. Register TACTics Online and go to
+http://en.wikipedia.org/wiki/FORE_Systems. Register TACTics Online and go to
 the 'software updates' pages. The firmware binaries are part of
 the various ForeThought software distributions.
 
diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt
new file mode 100644
index 000000000000..ab2d71831892
--- /dev/null
+++ b/Documentation/networking/igb.txt
@@ -0,0 +1,132 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Additional Configurations
+- Support
+
+Identifying Your Adapter
+========================
+
+This driver supports all 82575, 82576 and 82580-based Intel (R) gigabit network
+connections.
+
+For specific information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+    http://support.intel.com/support/go/network/adapter/idguide.htm
+
+Command Line Parameters
+=======================
+
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+max_vfs
+-------
+Valid Range:   0-7
+Default Value: 0
+
+This parameter adds support for SR-IOV.  It causes the driver to spawn up to
+max_vfs worth of virtual function.
+
+Additional Configurations
+=========================
+
+  Jumbo Frames
+  ------------
+  Jumbo Frames support is enabled by changing the MTU to a value larger than
+  the default of 1500.  Use the ifconfig command to increase the MTU size.
+  For example:
+
+       ifconfig eth<x> mtu 9000 up
+
+  This setting is not saved across reboots.
+
+  Notes:
+
+  - The maximum MTU setting for Jumbo Frames is 9216.  This value coincides
+    with the maximum Jumbo Frames size of 9234 bytes.
+
+  - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
+    loss of link.
+
+  Ethtool
+  -------
+  The driver utilizes the ethtool interface for driver configuration and
+  diagnostics, as well as displaying statistical information.
+
+  http://sourceforge.net/projects/gkernel.
+
+  Enabling Wake on LAN* (WoL)
+  ---------------------------
+  WoL is configured through the Ethtool* utility.
+
+  For instructions on enabling WoL with Ethtool, refer to the Ethtool man page.
+
+  WoL will be enabled on the system during the next shut down or reboot.
+  For this driver version, in order to enable WoL, the igb driver must be
+  loaded when shutting down or rebooting the system.
+
+  Wake On LAN is only supported on port A of multi-port adapters.
+
+  Wake On LAN is not supported for the Intel(R) Gigabit VT Quad Port Server
+  Adapter.
+
+  Multiqueue
+  ----------
+  In this mode, a separate MSI-X vector is allocated for each queue and one
+  for "other" interrupts such as link status change and errors.  All
+  interrupts are throttled via interrupt moderation.  Interrupt moderation
+  must be used to avoid interrupt storms while the driver is processing one
+  interrupt.  The moderation value should be at least as large as the expected
+  time for the driver to process an interrupt. Multiqueue is off by default.
+
+  REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not
+  found, the system will fallback to MSI or to Legacy interrupts.
+
+  LRO
+  ---
+  Large Receive Offload (LRO) is a technique for increasing inbound throughput
+  of high-bandwidth network connections by reducing CPU overhead. It works by
+  aggregating multiple incoming packets from a single stream into a larger
+  buffer before they are passed higher up the networking stack, thus reducing
+  the number of packets that have to be processed. LRO combines multiple
+  Ethernet frames into a single receive in the stack, thereby potentially
+  decreasing CPU utilization for receives.
+
+  NOTE: You need to have inet_lro enabled via either the CONFIG_INET_LRO or
+  CONFIG_INET_LRO_MODULE kernel config option. Additionally, if
+  CONFIG_INET_LRO_MODULE is used, the inet_lro module needs to be loaded
+  before the igb driver.
+
+  You can verify that the driver is using LRO by looking at these counters in
+  Ethtool:
+
+  lro_aggregated - count of total packets that were combined
+  lro_flushed - counts the number of packets flushed out of LRO
+  lro_no_desc - counts the number of times an LRO descriptor was not available
+  for the LRO packet
+
+  NOTE: IPv6 and UDP are not supported by LRO.
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/igbvf.txt b/Documentation/networking/igbvf.txt
new file mode 100644
index 000000000000..056028138d9c
--- /dev/null
+++ b/Documentation/networking/igbvf.txt
@@ -0,0 +1,78 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Additional Configurations
+- Support
+
+This file describes the igbvf Linux* Base Driver for Intel Network Connection.
+
+The igbvf driver supports 82576-based virtual function devices that can only
+be activated on kernels that support SR-IOV. SR-IOV requires the correct
+platform and OS support.
+
+The igbvf driver requires the igb driver, version 2.0 or later. The igbvf
+driver supports virtual functions generated by the igb driver with a max_vfs
+value of 1 or greater. For more information on the max_vfs parameter refer
+to the README included with the igb driver.
+
+The guest OS loading the igbvf driver must support MSI-X interrupts.
+
+This driver is only supported as a loadable module at this time.  Intel is
+not supplying patches against the kernel source to allow for static linking
+of the driver.  For questions related to hardware requirements, refer to the
+documentation supplied with your Intel Gigabit adapter.  All hardware
+requirements listed apply to use with Linux.
+
+Instructions on updating ethtool can be found in the section "Additional
+Configurations" later in this document.
+
+VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
+
+Identifying Your Adapter
+========================
+
+The igbvf driver supports 82576-based virtual function devices that can only
+be activated on kernels that support SR-IOV.
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+    http://support.intel.com/support/go/network/adapter/idguide.htm
+
+For the latest Intel network drivers for Linux, refer to the following
+website.  In the search field, enter your adapter name or type, or use the
+networking link on the left to search for your adapter:
+
+    http://downloadcenter.intel.com/scripts-df-external/Support_Intel.aspx
+
+Additional Configurations
+=========================
+
+  Ethtool
+  -------
+  The driver utilizes the ethtool interface for driver configuration and
+  diagnostics, as well as displaying statistical information.
+
+  http://sourceforge.net/projects/gkernel.
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    http://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index d0536b5a4e01..c7165f4cb792 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -903,7 +903,7 @@ arp_ignore - INTEGER
 arp_notify - BOOLEAN
 	Define mode for notification of address and device changes.
 	0 - (default): do nothing
-	1 - Generate gratuitous arp replies when device is brought up
+	1 - Generate gratuitous arp requests when device is brought up
 	    or hardware address changes.
 
 arp_accept - BOOLEAN
@@ -1014,6 +1014,12 @@ conf/interface/*:
 accept_ra - BOOLEAN
 	Accept Router Advertisements; autoconfigure using them.
 
+	Possible values are:
+		0 Do not accept Router Advertisements.
+		1 Accept Router Advertisements if forwarding is disabled.
+		2 Overrule forwarding behaviour. Accept Router Advertisements
+		  even if forwarding is enabled.
+
 	Functional default: enabled if local forwarding is disabled.
 			    disabled if local forwarding is enabled.
 
@@ -1075,7 +1081,12 @@ forwarding - BOOLEAN
 	Note: It is recommended to have the same setting on all
 	interfaces; mixed router/host scenarios are rather uncommon.
 
-	FALSE:
+	Possible values are:
+		0 Forwarding disabled
+		1 Forwarding enabled
+		2 Forwarding enabled (Hybrid Mode)
+
+	FALSE (0):
 
 	By default, Host behaviour is assumed.  This means:
 
@@ -1085,18 +1096,24 @@ forwarding - BOOLEAN
 	   Advertisements (and do autoconfiguration).
 	4. If accept_redirects is TRUE (default), accept Redirects.
 
-	TRUE:
+	TRUE (1):
 
 	If local forwarding is enabled, Router behaviour is assumed.
 	This means exactly the reverse from the above:
 
 	1. IsRouter flag is set in Neighbour Advertisements.
 	2. Router Solicitations are not sent.
-	3. Router Advertisements are ignored.
+	3. Router Advertisements are ignored unless accept_ra is 2.
 	4. Redirects are ignored.
 
-	Default: FALSE if global forwarding is disabled (default),
-		 otherwise TRUE.
+	TRUE (2):
+
+	Hybrid mode. Same behaviour as TRUE, except for:
+
+	2. Router Solicitations are being sent when necessary.
+
+	Default: 0 (disabled) if global forwarding is disabled (default),
+		 otherwise 1 (enabled).
 
 hop_limit - INTEGER
 	Default Hop Limit to set.
diff --git a/Documentation/networking/ipddp.txt b/Documentation/networking/ipddp.txt
index 661a5558dd8e..ba5c217fffe0 100644
--- a/Documentation/networking/ipddp.txt
+++ b/Documentation/networking/ipddp.txt
@@ -36,11 +36,6 @@ AppleTalk-IP to IP decapsulation.
 Basic instructions for user space tools
 =======================================
 
-To enable AppleTalk-IP decapsulation/encapsulation you will need the 
-proper tools. You can get the tools for decapsulation from
-http://spacs1.spacs.k12.wi.us/~jschlst/index.html and for encapsulation
-from http://www.maths.unm.edu/~bradford/ltpc.html
-
 I will briefly describe the operation of the tools, but you will
 need to consult the supporting documentation for each set of tools.
 
diff --git a/Documentation/networking/iphase.txt b/Documentation/networking/iphase.txt
index 55eac4a784e2..670b72f16585 100644
--- a/Documentation/networking/iphase.txt
+++ b/Documentation/networking/iphase.txt
@@ -22,7 +22,7 @@ The features and limitations of this driver are as follows:
     - All variants of Interphase ATM PCI (i)Chip adapter cards are supported, 
       including x575 (OC3, control memory 128K , 512K and packet memory 128K, 
       512K and 1M), x525 (UTP25) and x531 (DS3 and E3). See 
-      http://www.iphase.com/site/iphase-web/?epi_menuItemID=e196f04b4b3b40502f150882e21046a0
+      http://www.iphase.com/
       for details.
     - Only x86 platforms are supported.
     - SMP is supported.
diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt
index 19015de6725f..21dd5d15b6b4 100755..100644
--- a/Documentation/networking/ixgbevf.txt
+++ b/Documentation/networking/ixgbevf.txt
@@ -1,19 +1,16 @@
 Linux* Base Driver for Intel(R) Network Connection
 ==================================================
 
-November 24, 2009
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
 
 Contents
 ========
 
-- In This Release
 - Identifying Your Adapter
 - Known Issues/Troubleshooting
 - Support
 
-In This Release
-===============
-
 This file describes the ixgbevf Linux* Base Driver for Intel Network
 Connection.
 
@@ -33,7 +30,7 @@ Identifying Your Adapter
 For more information on how to identify your adapter, go to the Adapter &
 Driver ID Guide at:
 
-    http://support.intel.com/support/network/sb/CS-008441.htm
+    http://support.intel.com/support/go/network/adapter/idguide.htm
 
 Known Issues/Troubleshooting
 ============================
@@ -57,34 +54,3 @@ or the Intel Wired Networking project hosted by Sourceforge at:
 If an issue is identified with the released source code on the supported
 kernel with a supported adapter, email the specific information related
 to the issue to e1000-devel@lists.sf.net
-
-License
-=======
-
-Intel 10 Gigabit Linux driver.
-Copyright(c) 1999 - 2009 Intel Corporation.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms and conditions of the GNU General Public License,
-version 2, as published by the Free Software Foundation.
-
-This program is distributed in the hope it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-more details.
-
-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc.,
-51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-The full GNU General Public License is included in this distribution in
-the file called "COPYING".
-
-Trademarks
-==========
-
-Intel, Itanium, and Pentium are trademarks or registered trademarks of
-Intel Corporation or its subsidiaries in the United States and other
-countries.
-
-* Other names and brands may be claimed as the property of others.
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index 98f71a5cef00..073894d1c093 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -8,7 +8,7 @@ capture network traffic with utilities like tcpdump or any other that needs
 raw access to network interface.
 
 You can find the latest version of this document at:
-    http://pusa.uv.es/~ulisses/packet_mmap/
+    http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap
 
 Howto can be found at:
     http://wiki.gnu-log.net (packet_mmap)
@@ -56,7 +56,7 @@ support for PACKET_MMAP, and also probably the libpcap included in your distribu
 
 I'm aware of two implementations of PACKET_MMAP in libpcap:
 
-    http://pusa.uv.es/~ulisses/packet_mmap/  (by Simon Patarin, based on libpcap 0.6.2)
+    http://wiki.ipxwarzone.com/		     (by Simon Patarin, based on libpcap 0.6.2)
     http://public.lanl.gov/cpw/              (by Phil Wood, based on lastest libpcap)
 
 The rest of this document is intended for people who want to understand
@@ -493,6 +493,32 @@ The user can also use poll() to check if a buffer is available:
     pfd.events = POLLOUT;
     retval = poll(&pfd, 1, timeout);
 
+-------------------------------------------------------------------------------
++ PACKET_TIMESTAMP
+-------------------------------------------------------------------------------
+
+The PACKET_TIMESTAMP setting determines the source of the timestamp in
+the packet meta information.  If your NIC is capable of timestamping
+packets in hardware, you can request those hardware timestamps to used.
+Note: you may need to enable the generation of hardware timestamps with
+SIOCSHWTSTAMP.
+
+PACKET_TIMESTAMP accepts the same integer bit field as
+SO_TIMESTAMPING.  However, only the SOF_TIMESTAMPING_SYS_HARDWARE
+and SOF_TIMESTAMPING_RAW_HARDWARE values are recognized by
+PACKET_TIMESTAMP.  SOF_TIMESTAMPING_SYS_HARDWARE takes precedence over
+SOF_TIMESTAMPING_RAW_HARDWARE if both bits are set.
+
+    int req = 0;
+    req |= SOF_TIMESTAMPING_SYS_HARDWARE;
+    setsockopt(fd, SOL_PACKET, PACKET_TIMESTAMP, (void *) &req, sizeof(req))
+
+If PACKET_TIMESTAMP is not set, a software timestamp generated inside
+the networking stack is used (the behavior before this setting was added).
+
+See include/linux/net_tstamp.h and Documentation/networking/timestamping
+for more information on hardware timestamps.
+
 --------------------------------------------------------------------------------
 + THANKS
 --------------------------------------------------------------------------------
diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt
index 6e8ce09f9c73..24ad2adba6e5 100644
--- a/Documentation/networking/phonet.txt
+++ b/Documentation/networking/phonet.txt
@@ -112,6 +112,22 @@ However, connect() and getpeername() are not supported, as they did
 not seem useful with Phonet usages (could be added easily).
 
 
+Resource subscription
+---------------------
+
+A Phonet datagram socket can be subscribed to any number of 8-bits
+Phonet resources, as follow:
+
+  uint32_t res = 0xXX;
+  ioctl(fd, SIOCPNADDRESOURCE, &res);
+
+Subscription is similarly cancelled using the SIOCPNDELRESOURCE I/O
+control request, or when the socket is closed.
+
+Note that no more than one socket can be subcribed to any given
+resource at a time. If not, ioctl() will return EBUSY.
+
+
 Phonet Pipe protocol
 --------------------
 
@@ -166,6 +182,46 @@ The pipe protocol provides two socket options at the SOL_PNPIPE level:
     or zero if encapsulation is off.
 
 
+Phonet Pipe-controller Implementation
+-------------------------------------
+
+Phonet Pipe-controller is enabled by selecting the CONFIG_PHONET_PIPECTRLR Kconfig
+option. It is useful when communicating with those Nokia Modems which do not
+implement Pipe controller in them e.g. Nokia Slim Modem used in ST-Ericsson
+U8500 platform.
+
+The implementation is based on the Data Connection Establishment Sequence
+depicted in 'Nokia Wireless Modem API - Wireless_modem_user_guide.pdf'
+document.
+
+It allows a phonet sequenced socket (host-pep) to initiate a Pipe connection
+between itself and a remote pipe-end point (e.g. modem).
+
+The implementation adds socket options at SOL_PNPIPE level:
+
+ PNPIPE_PIPE_HANDLE
+	It accepts an integer argument for setting value of pipe handle.
+
+  PNPIPE_ENABLE accepts one integer value (int). If set to zero, the pipe
+    is disabled. If the value is non-zero, the pipe is enabled. If the pipe
+    is not (yet) connected, ENOTCONN is error is returned.
+
+The implementation also adds socket 'connect'. On calling the 'connect', pipe
+will be created between the source socket and the destination, and the pipe
+state will be set to PIPE_DISABLED.
+
+After a pipe has been created and enabled successfully, the Pipe data can be
+exchanged between the host-pep and remote-pep (modem).
+
+User-space would typically follow below sequence with Pipe controller:-
+-socket
+-bind
+-setsockopt for PNPIPE_PIPE_HANDLE
+-connect
+-setsockopt for PNPIPE_ENCAP_IP
+-setsockopt for PNPIPE_ENABLE
+
+
 Authors
 -------
 
diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt
index 88bb71b46da4..9eb1ba52013d 100644
--- a/Documentation/networking/phy.txt
+++ b/Documentation/networking/phy.txt
@@ -177,18 +177,6 @@ Doing it all yourself
  
    A convenience function to print out the PHY status neatly.
 
- int phy_clear_interrupt(struct phy_device *phydev);
- int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
-   
-   Clear the PHY's interrupt, and configure which ones are allowed,
-   respectively.  Currently only supports all on, or all off.
- 
- int phy_enable_interrupts(struct phy_device *phydev);
- int phy_disable_interrupts(struct phy_device *phydev);
-
-   Functions which enable/disable PHY interrupts, clearing them
-   before and after, respectively.
-
  int phy_start_interrupts(struct phy_device *phydev);
  int phy_stop_interrupts(struct phy_device *phydev);
 
@@ -213,12 +201,6 @@ Doing it all yourself
    Fills the phydev structure with up-to-date information about the current
    settings in the PHY.
 
- void phy_sanitize_settings(struct phy_device *phydev)
-   
-   Resolves differences between currently desired settings, and
-   supported settings for the given PHY device.  Does not make
-   the changes in the hardware, though.
-
  int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
  int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
 
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index 61bb645d50e0..75e4fd708ccb 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -151,6 +151,8 @@ Examples:
 
  pgset stop    	          aborts injection. Also, ^C aborts generator.
 
+ pgset "rate 300M"        set rate to 300 Mb/s
+ pgset "ratep 1000000"    set rate to 1Mpps
 
 Example scripts
 ===============
@@ -241,6 +243,9 @@ src6
 flows
 flowlen
 
+rate
+ratep
+
 References:
 ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/
 ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/examples/
diff --git a/Documentation/networking/ray_cs.txt b/Documentation/networking/ray_cs.txt
index 145d27a52395..c0c12307ed9d 100644
--- a/Documentation/networking/ray_cs.txt
+++ b/Documentation/networking/ray_cs.txt
@@ -13,8 +13,8 @@ wireless LAN cards.
 
 As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel
 source.  My web page for the development of ray_cs is at
-http://world.std.com/~corey/raylink.html and I can be emailed at
-corey@world.std.com
+http://web.ralinktech.com/ralink/Home/Support/Linux.html 
+and I can be emailed at corey@world.std.com
 
 The kernel driver is based on ray_cs-1.62.tgz
 
diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt
index c3d6b4d5d014..9d4e0f4df5a8 100644
--- a/Documentation/networking/s2io.txt
+++ b/Documentation/networking/s2io.txt
@@ -133,7 +133,8 @@ bring down CPU utilization.
 ** For AMD opteron platforms with 8131 chipset, MMRBC=1 and MOST=1 are 
 recommended as safe parameters.
 For more information, please review the AMD8131 errata at
-http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26310.pdf
+http://vip.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/
+26310_AMD-8131_HyperTransport_PCI-X_Tunnel_Revision_Guide_rev_3_18.pdf
 
 6.  Available Downloads
 Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up 
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
index e8c8f4f06c67..98097d8cb910 100644
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@@ -172,15 +172,19 @@ struct skb_shared_hwtstamps {
 };
 
 Time stamps for outgoing packets are to be generated as follows:
-- In hard_start_xmit(), check if skb_tx(skb)->hardware is set no-zero.
-  If yes, then the driver is expected to do hardware time stamping.
+- In hard_start_xmit(), check if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)
+  is set no-zero. If yes, then the driver is expected to do hardware time
+  stamping.
 - If this is possible for the skb and requested, then declare
-  that the driver is doing the time stamping by setting the field
-  skb_tx(skb)->in_progress non-zero. You might want to keep a pointer
-  to the associated skb for the next step and not free the skb. A driver
-  not supporting hardware time stamping doesn't do that. A driver must
-  never touch sk_buff::tstamp! It is used to store software generated
-  time stamps by the network subsystem.
+  that the driver is doing the time stamping by setting the flag
+  SKBTX_IN_PROGRESS in skb_shinfo(skb)->tx_flags , e.g. with
+
+      skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+
+  You might want to keep a pointer to the associated skb for the next step
+  and not free the skb. A driver not supporting hardware time stamping doesn't
+  do that. A driver must never touch sk_buff::tstamp! It is used to store
+  software generated time stamps by the network subsystem.
 - As soon as the driver has sent the packet and/or obtained a
   hardware time stamp for it, it passes the time stamp back by
   calling skb_hwtstamp_tx() with the original skb, the raw
@@ -191,6 +195,6 @@ Time stamps for outgoing packets are to be generated as follows:
   this would occur at a later time in the processing pipeline than other
   software time stamping and therefore could lead to unexpected deltas
   between time stamps.
-- If the driver did not call set skb_tx(skb)->in_progress, then
+- If the driver did not set the SKBTX_IN_PROGRESS flag (see above), then
   dev_hard_start_xmit() checks whether software time stamping
   is wanted as fallback and potentially generates the time stamp.
diff --git a/Documentation/networking/tlan.txt b/Documentation/networking/tlan.txt
index 7e6aa5b20c37..34550dfcef74 100644
--- a/Documentation/networking/tlan.txt
+++ b/Documentation/networking/tlan.txt
@@ -2,7 +2,7 @@
 (C) 1998 James Banks
 (C) 1999-2001 Torben Mathiasen <tmm@image.dk, torben.mathiasen@compaq.com>
 
-For driver information/updates visit http://opensource.compaq.com
+For driver information/updates visit http://www.compaq.com
 
 
 TLAN driver for Linux, version 1.14a
@@ -113,5 +113,5 @@ III.  Things to try if you have problems.
 
 There is also a tlan mailing list which you can join by sending "subscribe tlan"
 in the body of an email to majordomo@vuser.vu.union.edu.
-There is also a tlan website at http://opensource.compaq.com
+There is also a tlan website at http://www.compaq.com
 
diff --git a/Documentation/networking/udplite.txt b/Documentation/networking/udplite.txt
index 855d8da57a23..d727a3829100 100644
--- a/Documentation/networking/udplite.txt
+++ b/Documentation/networking/udplite.txt
@@ -11,11 +11,13 @@
   This file briefly describes the existing kernel support and the socket API.
   For in-depth information, you can consult:
 
-   o The UDP-Lite Homepage: http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/
+   o The UDP-Lite Homepage:
+	http://web.archive.org/web/*/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/ 
        From here you can also download some example application source code.
 
    o The UDP-Lite HOWTO on
-       http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/files/UDP-Lite-HOWTO.txt
+       http://web.archive.org/web/*/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/
+	files/UDP-Lite-HOWTO.txt
 
    o The Wireshark UDP-Lite WiKi (with capture files):
        http://wiki.wireshark.org/Lightweight_User_Datagram_Protocol
@@ -26,12 +28,7 @@
   I) APPLICATIONS
 
   Several applications have been ported successfully to UDP-Lite. Ethereal
-  (now called wireshark) has UDP-Litev4/v6 support by default. The tarball on
-
-   http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/files/udplite_linux.tar.gz
-
-  has source code for several v4/v6 client-server and network testing examples.
-
+  (now called wireshark) has UDP-Litev4/v6 support by default. 
   Porting applications to UDP-Lite is straightforward: only socket level and
   IPPROTO need to be changed; senders additionally set the checksum coverage
   length (default = header length = 8). Details are in the next section.
diff --git a/Documentation/networking/wavelan.txt b/Documentation/networking/wavelan.txt
deleted file mode 100644
index afa6e521c685..000000000000
--- a/Documentation/networking/wavelan.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-	The Wavelan drivers saga
-	------------------------
-
-	By Jean Tourrilhes <jt@hpl.hp.com>
-
-	The Wavelan is a Radio network adapter designed by
-Lucent. Under this generic name is hidden quite a variety of hardware,
-and many Linux driver to support it.
-	The get the full story on Wireless LANs, please consult :
-		http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
-
-"wavelan" driver (old ISA Wavelan)
-----------------
-	o Config :	Network device -> Wireless LAN -> AT&T WaveLAN
-	o Location :	.../drivers/net/wireless/wavelan*
-	o in-line doc :	.../drivers/net/wireless/wavelan.p.h
-	o on-line doc :
-	    http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
-
-	This is the driver for the ISA version of the first generation
-of the Wavelan, now discontinued. The device is 2 Mb/s, composed of a
-Intel 82586 controller and a Lucent Modem, and is NOT 802.11 compliant.
-	The driver has been tested with the following hardware :
-	o Wavelan ISA 915 MHz (full length ISA card) 
-	o Wavelan ISA 915 MHz 2.0 (half length ISA card) 
-	o Wavelan ISA 2.4 GHz (full length ISA card, fixed frequency) 
-	o Wavelan ISA 2.4 GHz 2.0 (half length ISA card, frequency selectable) 
-	o Above cards with the optional DES encryption feature 
-
-"wavelan_cs" driver (old Pcmcia Wavelan)
--------------------
-	o Config :	Network device -> PCMCIA network ->
-				Pcmcia Wireless LAN -> AT&T/Lucent WaveLAN
-	o Location :	.../drivers/net/pcmcia/wavelan*
-	o in-line doc :	.../drivers/net/pcmcia/wavelan_cs.h
-	o on-line doc :
-	    http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
-
-	This is the driver for the PCMCIA version of the first
-generation of the Wavelan, now discontinued. The device is 2 Mb/s,
-composed of a Intel 82593 controller (totally different from the 82586)
-and a Lucent Modem, and NOT 802.11 compatible.
-	The driver has been tested with the following hardware :
-	o Wavelan Pcmcia 915 MHz 2.0 (Pcmcia card + separate
-					modem/antenna block) 
-	o Wavelan Pcmcia 2.4 GHz 2.0 (Pcmcia card + separate
-					modem/antenna block) 
-
-"wvlan_cs" driver (Wavelan IEEE, GPL)
------------------
-	o Config :	Not yet in kernel
-	o Location :	Pcmcia package 3.1.10+
-	o on-line doc :	http://www.fasta.fh-dortmund.de/users/andy/wvlan/
-
-	This is the driver for the current generation of Wavelan IEEE,
-which is 802.11 compatible. Depending on version, it is 2 Mb/s or 11
-Mb/s, with or without encryption, all implemented in Lucent specific
-DSP (the Hermes).
-	This is a GPL full source PCMCIA driver (ISA is just a Pcmcia
-card with ISA-Pcmcia bridge).
-
-"wavelan2_cs" driver (Wavelan IEEE, binary)
---------------------
-	o Config :	Not yet in kernel
-	o Location :	ftp://sourceforge.org/pcmcia/contrib/
-
-	This driver support exactly the same hardware as the previous
-driver, the main difference is that it is based on a binary library
-and supported by Lucent.
-
-	I hope it clears the confusion ;-)
-
-	Jean
diff --git a/Documentation/padata.txt b/Documentation/padata.txt
index 269d7d0d8335..7ddfe216a0aa 100644
--- a/Documentation/padata.txt
+++ b/Documentation/padata.txt
@@ -1,5 +1,5 @@
 The padata parallel execution mechanism
-Last updated for 2.6.34
+Last updated for 2.6.36
 
 Padata is a mechanism by which the kernel can farm work out to be done in
 parallel on multiple CPUs while retaining the ordering of tasks.  It was
@@ -13,31 +13,86 @@ overall control of how tasks are to be run:
 
     #include <linux/padata.h>
 
-    struct padata_instance *padata_alloc(const struct cpumask *cpumask,
-				         struct workqueue_struct *wq);
+    struct padata_instance *padata_alloc(struct workqueue_struct *wq,
+					 const struct cpumask *pcpumask,
+					 const struct cpumask *cbcpumask);
 
-The cpumask describes which processors will be used to execute work
-submitted to this instance.  The workqueue wq is where the work will
-actually be done; it should be a multithreaded queue, naturally.
+The pcpumask describes which processors will be used to execute work
+submitted to this instance in parallel. The cbcpumask defines which
+processors are allowed to be used as the serialization callback processor.
+The workqueue wq is where the work will actually be done; it should be
+a multithreaded queue, naturally.
+
+To allocate a padata instance with the cpu_possible_mask for both
+cpumasks this helper function can be used:
+
+    struct padata_instance *padata_alloc_possible(struct workqueue_struct *wq);
+
+Note: Padata maintains two kinds of cpumasks internally. The user supplied
+cpumasks, submitted by padata_alloc/padata_alloc_possible and the 'usable'
+cpumasks. The usable cpumasks are always a subset of active CPUs in the
+user supplied cpumasks; these are the cpumasks padata actually uses. So
+it is legal to supply a cpumask to padata that contains offline CPUs.
+Once an offline CPU in the user supplied cpumask comes online, padata
+is going to use it.
 
 There are functions for enabling and disabling the instance:
 
-    void padata_start(struct padata_instance *pinst);
+    int padata_start(struct padata_instance *pinst);
     void padata_stop(struct padata_instance *pinst);
 
-These functions literally do nothing beyond setting or clearing the
-"padata_start() was called" flag; if that flag is not set, other functions
-will refuse to work.
+These functions are setting or clearing the "PADATA_INIT" flag;
+if that flag is not set, other functions will refuse to work.
+padata_start returns zero on success (flag set) or -EINVAL if the
+padata cpumask contains no active CPU (flag not set).
+padata_stop clears the flag and blocks until the padata instance
+is unused.
 
 The list of CPUs to be used can be adjusted with these functions:
 
-    int padata_set_cpumask(struct padata_instance *pinst,
+    int padata_set_cpumasks(struct padata_instance *pinst,
+			    cpumask_var_t pcpumask,
+			    cpumask_var_t cbcpumask);
+    int padata_set_cpumask(struct padata_instance *pinst, int cpumask_type,
 			   cpumask_var_t cpumask);
-    int padata_add_cpu(struct padata_instance *pinst, int cpu);
-    int padata_remove_cpu(struct padata_instance *pinst, int cpu);
+    int padata_add_cpu(struct padata_instance *pinst, int cpu, int mask);
+    int padata_remove_cpu(struct padata_instance *pinst, int cpu, int mask);
+
+Changing the CPU masks are expensive operations, though, so it should not be
+done with great frequency.
+
+It's possible to change both cpumasks of a padata instance with
+padata_set_cpumasks by specifying the cpumasks for parallel execution (pcpumask)
+and for the serial callback function (cbcpumask). padata_set_cpumask is used to
+change just one of the cpumasks. Here cpumask_type is one of PADATA_CPU_SERIAL,
+PADATA_CPU_PARALLEL and cpumask specifies the new cpumask to use.
+To simply add or remove one CPU from a certain cpumask the functions
+padata_add_cpu/padata_remove_cpu are used. cpu specifies the CPU to add or
+remove and mask is one of PADATA_CPU_SERIAL, PADATA_CPU_PARALLEL.
+
+If a user is interested in padata cpumask changes, he can register to
+the padata cpumask change notifier:
+
+    int padata_register_cpumask_notifier(struct padata_instance *pinst,
+					 struct notifier_block *nblock);
+
+To unregister from that notifier:
+
+    int padata_unregister_cpumask_notifier(struct padata_instance *pinst,
+					   struct notifier_block *nblock);
+
+The padata cpumask change notifier notifies about changes of the usable
+cpumasks, i.e. the subset of active CPUs in the user supplied cpumask.
+
+Padata calls the notifier chain with:
+
+    blocking_notifier_call_chain(&pinst->cpumask_change_notifier,
+				 notification_mask,
+				 &pd_new->cpumask);
 
-Changing the CPU mask has the look of an expensive operation, though, so it
-probably should not be done with great frequency.
+Here cpumask_change_notifier is registered notifier, notification_mask
+is one of PADATA_CPU_SERIAL, PADATA_CPU_PARALLEL and cpumask is a pointer
+to a struct padata_cpumask that contains the new cpumask information.
 
 Actually submitting work to the padata instance requires the creation of a
 padata_priv structure:
@@ -49,8 +104,8 @@ padata_priv structure:
     };
 
 This structure will almost certainly be embedded within some larger
-structure specific to the work to be done.  Most its fields are private to
-padata, but the structure should be zeroed at initialization time, and the
+structure specific to the work to be done.  Most of its fields are private to
+padata, but the structure should be zeroed at initialisation time, and the
 parallel() and serial() functions should be provided.  Those functions will
 be called in the process of getting the work done as we will see
 momentarily.
@@ -63,12 +118,10 @@ The submission of work is done with:
 The pinst and padata structures must be set up as described above; cb_cpu
 specifies which CPU will be used for the final callback when the work is
 done; it must be in the current instance's CPU mask.  The return value from
-padata_do_parallel() is a little strange; zero is an error return
-indicating that the caller forgot the padata_start() formalities.  -EBUSY
-means that somebody, somewhere else is messing with the instance's CPU
-mask, while -EINVAL is a complaint about cb_cpu not being in that CPU mask.
-If all goes well, this function will return -EINPROGRESS, indicating that
-the work is in progress.
+padata_do_parallel() is zero on success, indicating that the work is in
+progress. -EBUSY means that somebody, somewhere else is messing with the
+instance's CPU mask, while -EINVAL is a complaint about cb_cpu not being
+in that CPU mask or about a not running instance.
 
 Each task submitted to padata_do_parallel() will, in turn, be passed to
 exactly one call to the above-mentioned parallel() function, on one CPU, so
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index 61bc4e943116..dd04361dd361 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,4 +1,41 @@
 This file details changes in 2.6 which affect PCMCIA card driver authors:
+* pcmcia_loop_config() and autoconfiguration (as of 2.6.36)
+   If struct pcmcia_device *p_dev->config_flags is set accordingly,
+   pcmcia_loop_config() now sets up certain configuration values
+   automatically, though the driver may still override the settings
+   in the callback function. The following autoconfiguration options
+   are provided at the moment:
+	CONF_AUTO_CHECK_VCC : check for matching Vcc
+	CONF_AUTO_SET_VPP   : set Vpp
+	CONF_AUTO_AUDIO     : auto-enable audio line, if required
+	CONF_AUTO_SET_IO    : set ioport resources (->resource[0,1])
+	CONF_AUTO_SET_IOMEM : set first iomem resource (->resource[2])
+
+* pcmcia_request_configuration -> pcmcia_enable_device (as of 2.6.36)
+   pcmcia_request_configuration() got renamed to pcmcia_enable_device(),
+   as it mirrors pcmcia_disable_device(). Configuration settings are now
+   stored in struct pcmcia_device, e.g. in the fields config_flags,
+   config_index, config_base, vpp.
+
+* pcmcia_request_window changes (as of 2.6.36)
+   Instead of win_req_t, drivers are now requested to fill out
+   struct pcmcia_device *p_dev->resource[2,3,4,5] for up to four ioport
+   ranges. After a call to pcmcia_request_window(), the regions found there
+   are reserved and may be used immediately -- until pcmcia_release_window()
+   is called.
+
+* pcmcia_request_io changes (as of 2.6.36)
+   Instead of io_req_t, drivers are now requested to fill out
+   struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
+   ranges. After a call to pcmcia_request_io(), the ports found there
+   are reserved, after calling pcmcia_request_configuration(), they may
+   be used.
+
+* No dev_info_t, no cs_types.h (as of 2.6.36)
+   dev_info_t and a few other typedefs are removed. No longer use them
+   in PCMCIA device drivers. Also, do not include pcmcia/cs_types.h, as
+   this file is gone.
+
 * No dev_node_t (as of 2.6.35)
    There is no more need to fill out a "dev_node_t" structure.
 
diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX
index fb742c213c9e..45e9d4a91284 100644
--- a/Documentation/power/00-INDEX
+++ b/Documentation/power/00-INDEX
@@ -14,6 +14,8 @@ interface.txt
 	- Power management user interface in /sys/power
 notifiers.txt
 	- Registering suspend notifiers in device drivers
+opp.txt
+	- Operating Performance Point library
 pci.txt
 	- How the PCI Subsystem Does Power Management
 pm_qos_interface.txt
diff --git a/Documentation/power/apm-acpi.txt b/Documentation/power/apm-acpi.txt
index 1bd799dc17e8..6cc423d3662e 100644
--- a/Documentation/power/apm-acpi.txt
+++ b/Documentation/power/apm-acpi.txt
@@ -28,5 +28,5 @@ and be sure that they are started sometime in the system boot process.
 Go ahead and start both.  If ACPI or APM is not available on your
 system the associated daemon will exit gracefully.
 
-  apmd:   http://worldvisions.ca/~apenwarr/apmd/
+  apmd:   http://ftp.debian.org/pool/main/a/apmd/
   acpid:  http://acpid.sf.net/
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
index 1555001bc733..ddd78172ef73 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -179,8 +179,7 @@ use the PM_TRACE mechanism documented in Documentation/s2ram.txt .
 
 To verify that the STR works, it is generally more convenient to use the s2ram
 tool available from http://suspend.sf.net and documented at
-http://en.opensuse.org/s2ram .  However, before doing that it is recommended to
-carry out STR testing using the facility described in section 1.
+http://en.opensuse.org/SDB:Suspend_to_RAM.
 
 Namely, after writing "freezer", "devices", "platform", "processors", or "core"
 into /sys/power/pm_test (available if the kernel is compiled with
diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt
index e67211fe0ee2..c537834af005 100644
--- a/Documentation/power/interface.txt
+++ b/Documentation/power/interface.txt
@@ -57,7 +57,7 @@ smallest image possible.  In particular, if "0" is written to this file, the
 suspend image will be as small as possible.
 
 Reading from this file will display the current image size limit, which
-is set to 500 MB by default.
+is set to 2/5 of available RAM by default.
 
 /sys/power/pm_trace controls the code which saves the last PM event point in
 the RTC across reboots, so that you can debug a machine that just hangs
diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
new file mode 100644
index 000000000000..44d87ad3cea9
--- /dev/null
+++ b/Documentation/power/opp.txt
@@ -0,0 +1,375 @@
+*=============*
+* OPP Library *
+*=============*
+
+(C) 2009-2010 Nishanth Menon <nm@ti.com>, Texas Instruments Incorporated
+
+Contents
+--------
+1. Introduction
+2. Initial OPP List Registration
+3. OPP Search Functions
+4. OPP Availability Control Functions
+5. OPP Data Retrieval Functions
+6. Cpufreq Table Generation
+7. Data Structures
+
+1. Introduction
+===============
+Complex SoCs of today consists of a multiple sub-modules working in conjunction.
+In an operational system executing varied use cases, not all modules in the SoC
+need to function at their highest performing frequency all the time. To
+facilitate this, sub-modules in a SoC are grouped into domains, allowing some
+domains to run at lower voltage and frequency while other domains are loaded
+more. The set of discrete tuples consisting of frequency and voltage pairs that
+the device will support per domain are called Operating Performance Points or
+OPPs.
+
+OPP library provides a set of helper functions to organize and query the OPP
+information. The library is located in drivers/base/power/opp.c and the header
+is located in include/linux/opp.h. OPP library can be enabled by enabling
+CONFIG_PM_OPP from power management menuconfig menu. OPP library depends on
+CONFIG_PM as certain SoCs such as Texas Instrument's OMAP framework allows to
+optionally boot at a certain OPP without needing cpufreq.
+
+Typical usage of the OPP library is as follows:
+(users)		-> registers a set of default OPPs		-> (library)
+SoC framework	-> modifies on required cases certain OPPs	-> OPP layer
+		-> queries to search/retrieve information	->
+
+OPP layer expects each domain to be represented by a unique device pointer. SoC
+framework registers a set of initial OPPs per device with the OPP layer. This
+list is expected to be an optimally small number typically around 5 per device.
+This initial list contains a set of OPPs that the framework expects to be safely
+enabled by default in the system.
+
+Note on OPP Availability:
+------------------------
+As the system proceeds to operate, SoC framework may choose to make certain
+OPPs available or not available on each device based on various external
+factors. Example usage: Thermal management or other exceptional situations where
+SoC framework might choose to disable a higher frequency OPP to safely continue
+operations until that OPP could be re-enabled if possible.
+
+OPP library facilitates this concept in it's implementation. The following
+operational functions operate only on available opps:
+opp_find_freq_{ceil, floor}, opp_get_voltage, opp_get_freq, opp_get_opp_count
+and opp_init_cpufreq_table
+
+opp_find_freq_exact is meant to be used to find the opp pointer which can then
+be used for opp_enable/disable functions to make an opp available as required.
+
+WARNING: Users of OPP library should refresh their availability count using
+get_opp_count if opp_enable/disable functions are invoked for a device, the
+exact mechanism to trigger these or the notification mechanism to other
+dependent subsystems such as cpufreq are left to the discretion of the SoC
+specific framework which uses the OPP library. Similar care needs to be taken
+care to refresh the cpufreq table in cases of these operations.
+
+WARNING on OPP List locking mechanism:
+-------------------------------------------------
+OPP library uses RCU for exclusivity. RCU allows the query functions to operate
+in multiple contexts and this synchronization mechanism is optimal for a read
+intensive operations on data structure as the OPP library caters to.
+
+To ensure that the data retrieved are sane, the users such as SoC framework
+should ensure that the section of code operating on OPP queries are locked
+using RCU read locks. The opp_find_freq_{exact,ceil,floor},
+opp_get_{voltage, freq, opp_count} fall into this category.
+
+opp_{add,enable,disable} are updaters which use mutex and implement it's own
+RCU locking mechanisms. opp_init_cpufreq_table acts as an updater and uses
+mutex to implment RCU updater strategy. These functions should *NOT* be called
+under RCU locks and other contexts that prevent blocking functions in RCU or
+mutex operations from working.
+
+2. Initial OPP List Registration
+================================
+The SoC implementation calls opp_add function iteratively to add OPPs per
+device. It is expected that the SoC framework will register the OPP entries
+optimally- typical numbers range to be less than 5. The list generated by
+registering the OPPs is maintained by OPP library throughout the device
+operation. The SoC framework can subsequently control the availability of the
+OPPs dynamically using the opp_enable / disable functions.
+
+opp_add - Add a new OPP for a specific domain represented by the device pointer.
+	The OPP is defined using the frequency and voltage. Once added, the OPP
+	is assumed to be available and control of it's availability can be done
+	with the opp_enable/disable functions. OPP library internally stores
+	and manages this information in the opp struct. This function may be
+	used by SoC framework to define a optimal list as per the demands of
+	SoC usage environment.
+
+	WARNING: Do not use this function in interrupt context.
+
+	Example:
+	 soc_pm_init()
+	 {
+		/* Do things */
+		r = opp_add(mpu_dev, 1000000, 900000);
+		if (!r) {
+			pr_err("%s: unable to register mpu opp(%d)\n", r);
+			goto no_cpufreq;
+		}
+		/* Do cpufreq things */
+	 no_cpufreq:
+		/* Do remaining things */
+	 }
+
+3. OPP Search Functions
+=======================
+High level framework such as cpufreq operates on frequencies. To map the
+frequency back to the corresponding OPP, OPP library provides handy functions
+to search the OPP list that OPP library internally manages. These search
+functions return the matching pointer representing the opp if a match is
+found, else returns error. These errors are expected to be handled by standard
+error checks such as IS_ERR() and appropriate actions taken by the caller.
+
+opp_find_freq_exact - Search for an OPP based on an *exact* frequency and
+	availability. This function is especially useful to enable an OPP which
+	is not available by default.
+	Example: In a case when SoC framework detects a situation where a
+	higher frequency could be made available, it can use this function to
+	find the OPP prior to call the opp_enable to actually make it available.
+	 rcu_read_lock();
+	 opp = opp_find_freq_exact(dev, 1000000000, false);
+	 rcu_read_unlock();
+	 /* dont operate on the pointer.. just do a sanity check.. */
+	 if (IS_ERR(opp)) {
+		pr_err("frequency not disabled!\n");
+		/* trigger appropriate actions.. */
+	 } else {
+		opp_enable(dev,1000000000);
+	 }
+
+	NOTE: This is the only search function that operates on OPPs which are
+	not available.
+
+opp_find_freq_floor - Search for an available OPP which is *at most* the
+	provided frequency. This function is useful while searching for a lesser
+	match OR operating on OPP information in the order of decreasing
+	frequency.
+	Example: To find the highest opp for a device:
+	 freq = ULONG_MAX;
+	 rcu_read_lock();
+	 opp_find_freq_floor(dev, &freq);
+	 rcu_read_unlock();
+
+opp_find_freq_ceil - Search for an available OPP which is *at least* the
+	provided frequency. This function is useful while searching for a
+	higher match OR operating on OPP information in the order of increasing
+	frequency.
+	Example 1: To find the lowest opp for a device:
+	 freq = 0;
+	 rcu_read_lock();
+	 opp_find_freq_ceil(dev, &freq);
+	 rcu_read_unlock();
+	Example 2: A simplified implementation of a SoC cpufreq_driver->target:
+	 soc_cpufreq_target(..)
+	 {
+		/* Do stuff like policy checks etc. */
+		/* Find the best frequency match for the req */
+		rcu_read_lock();
+		opp = opp_find_freq_ceil(dev, &freq);
+		rcu_read_unlock();
+		if (!IS_ERR(opp))
+			soc_switch_to_freq_voltage(freq);
+		else
+			/* do something when we cant satisfy the req */
+		/* do other stuff */
+	 }
+
+4. OPP Availability Control Functions
+=====================================
+A default OPP list registered with the OPP library may not cater to all possible
+situation. The OPP library provides a set of functions to modify the
+availability of a OPP within the OPP list. This allows SoC frameworks to have
+fine grained dynamic control of which sets of OPPs are operationally available.
+These functions are intended to *temporarily* remove an OPP in conditions such
+as thermal considerations (e.g. don't use OPPx until the temperature drops).
+
+WARNING: Do not use these functions in interrupt context.
+
+opp_enable - Make a OPP available for operation.
+	Example: Lets say that 1GHz OPP is to be made available only if the
+	SoC temperature is lower than a certain threshold. The SoC framework
+	implementation might choose to do something as follows:
+	 if (cur_temp < temp_low_thresh) {
+		/* Enable 1GHz if it was disabled */
+		rcu_read_lock();
+		opp = opp_find_freq_exact(dev, 1000000000, false);
+		rcu_read_unlock();
+		/* just error check */
+		if (!IS_ERR(opp))
+			ret = opp_enable(dev, 1000000000);
+		else
+			goto try_something_else;
+	 }
+
+opp_disable - Make an OPP to be not available for operation
+	Example: Lets say that 1GHz OPP is to be disabled if the temperature
+	exceeds a threshold value. The SoC framework implementation might
+	choose to do something as follows:
+	 if (cur_temp > temp_high_thresh) {
+		/* Disable 1GHz if it was enabled */
+		rcu_read_lock();
+		opp = opp_find_freq_exact(dev, 1000000000, true);
+		rcu_read_unlock();
+		/* just error check */
+		if (!IS_ERR(opp))
+			ret = opp_disable(dev, 1000000000);
+		else
+			goto try_something_else;
+	 }
+
+5. OPP Data Retrieval Functions
+===============================
+Since OPP library abstracts away the OPP information, a set of functions to pull
+information from the OPP structure is necessary. Once an OPP pointer is
+retrieved using the search functions, the following functions can be used by SoC
+framework to retrieve the information represented inside the OPP layer.
+
+opp_get_voltage - Retrieve the voltage represented by the opp pointer.
+	Example: At a cpufreq transition to a different frequency, SoC
+	framework requires to set the voltage represented by the OPP using
+	the regulator framework to the Power Management chip providing the
+	voltage.
+	 soc_switch_to_freq_voltage(freq)
+	 {
+		/* do things */
+		rcu_read_lock();
+		opp = opp_find_freq_ceil(dev, &freq);
+		v = opp_get_voltage(opp);
+		rcu_read_unlock();
+		if (v)
+			regulator_set_voltage(.., v);
+		/* do other things */
+	 }
+
+opp_get_freq - Retrieve the freq represented by the opp pointer.
+	Example: Lets say the SoC framework uses a couple of helper functions
+	we could pass opp pointers instead of doing additional parameters to
+	handle quiet a bit of data parameters.
+	 soc_cpufreq_target(..)
+	 {
+		/* do things.. */
+		 max_freq = ULONG_MAX;
+		 rcu_read_lock();
+		 max_opp = opp_find_freq_floor(dev,&max_freq);
+		 requested_opp = opp_find_freq_ceil(dev,&freq);
+		 if (!IS_ERR(max_opp) && !IS_ERR(requested_opp))
+			r = soc_test_validity(max_opp, requested_opp);
+		 rcu_read_unlock();
+		/* do other things */
+	 }
+	 soc_test_validity(..)
+	 {
+		 if(opp_get_voltage(max_opp) < opp_get_voltage(requested_opp))
+			 return -EINVAL;
+		 if(opp_get_freq(max_opp) < opp_get_freq(requested_opp))
+			 return -EINVAL;
+		/* do things.. */
+	 }
+
+opp_get_opp_count - Retrieve the number of available opps for a device
+	Example: Lets say a co-processor in the SoC needs to know the available
+	frequencies in a table, the main processor can notify as following:
+	 soc_notify_coproc_available_frequencies()
+	 {
+		/* Do things */
+		rcu_read_lock();
+		num_available = opp_get_opp_count(dev);
+		speeds = kzalloc(sizeof(u32) * num_available, GFP_KERNEL);
+		/* populate the table in increasing order */
+		freq = 0;
+		while (!IS_ERR(opp = opp_find_freq_ceil(dev, &freq))) {
+			speeds[i] = freq;
+			freq++;
+			i++;
+		}
+		rcu_read_unlock();
+
+		soc_notify_coproc(AVAILABLE_FREQs, speeds, num_available);
+		/* Do other things */
+	 }
+
+6. Cpufreq Table Generation
+===========================
+opp_init_cpufreq_table - cpufreq framework typically is initialized with
+	cpufreq_frequency_table_cpuinfo which is provided with the list of
+	frequencies that are available for operation. This function provides
+	a ready to use conversion routine to translate the OPP layer's internal
+	information about the available frequencies into a format readily
+	providable to cpufreq.
+
+	WARNING: Do not use this function in interrupt context.
+
+	Example:
+	 soc_pm_init()
+	 {
+		/* Do things */
+		r = opp_init_cpufreq_table(dev, &freq_table);
+		if (!r)
+			cpufreq_frequency_table_cpuinfo(policy, freq_table);
+		/* Do other things */
+	 }
+
+	NOTE: This function is available only if CONFIG_CPU_FREQ is enabled in
+	addition to CONFIG_PM as power management feature is required to
+	dynamically scale voltage and frequency in a system.
+
+7. Data Structures
+==================
+Typically an SoC contains multiple voltage domains which are variable. Each
+domain is represented by a device pointer. The relationship to OPP can be
+represented as follows:
+SoC
+ |- device 1
+ |	|- opp 1 (availability, freq, voltage)
+ |	|- opp 2 ..
+ ...	...
+ |	`- opp n ..
+ |- device 2
+ ...
+ `- device m
+
+OPP library maintains a internal list that the SoC framework populates and
+accessed by various functions as described above. However, the structures
+representing the actual OPPs and domains are internal to the OPP library itself
+to allow for suitable abstraction reusable across systems.
+
+struct opp - The internal data structure of OPP library which is used to
+	represent an OPP. In addition to the freq, voltage, availability
+	information, it also contains internal book keeping information required
+	for the OPP library to operate on.  Pointer to this structure is
+	provided back to the users such as SoC framework to be used as a
+	identifier for OPP in the interactions with OPP layer.
+
+	WARNING: The struct opp pointer should not be parsed or modified by the
+	users. The defaults of for an instance is populated by opp_add, but the
+	availability of the OPP can be modified by opp_enable/disable functions.
+
+struct device - This is used to identify a domain to the OPP layer. The
+	nature of the device and it's implementation is left to the user of
+	OPP library such as the SoC framework.
+
+Overall, in a simplistic view, the data structure operations is represented as
+following:
+
+Initialization / modification:
+            +-----+        /- opp_enable
+opp_add --> | opp | <-------
+  |         +-----+        \- opp_disable
+  \-------> domain_info(device)
+
+Search functions:
+             /-- opp_find_freq_ceil  ---\   +-----+
+domain_info<---- opp_find_freq_exact -----> | opp |
+             \-- opp_find_freq_floor ---/   +-----+
+
+Retrieval functions:
++-----+     /- opp_get_voltage
+| opp | <---
++-----+     \- opp_get_freq
+
+domain_info <- opp_get_opp_count
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index 9363e056188a..8ed17587a74b 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -13,7 +13,7 @@ regulators (where voltage output is controllable) and current sinks (where
 current limit is controllable).
 
 (C) 2008  Wolfson Microelectronics PLC.
-Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Author: Liam Girdwood <lrg@slimlogic.co.uk>
 
 
 Nomenclature
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 55b859b3bc72..489e9bacd165 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -1,6 +1,7 @@
 Run-time Power Management Framework for I/O Devices
 
 (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+(C) 2010 Alan Stern <stern@rowland.harvard.edu>
 
 1. Introduction
 
@@ -157,7 +158,8 @@ rules:
     to execute it, the other callbacks will not be executed for the same device.
 
   * A request to execute ->runtime_resume() will cancel any pending or
-    scheduled requests to execute the other callbacks for the same device.
+    scheduled requests to execute the other callbacks for the same device,
+    except for scheduled autosuspends.
 
 3. Run-time PM Device Fields
 
@@ -165,7 +167,7 @@ The following device run-time PM fields are present in 'struct dev_pm_info', as
 defined in include/linux/pm.h:
 
   struct timer_list suspend_timer;
-    - timer used for scheduling (delayed) suspend request
+    - timer used for scheduling (delayed) suspend and autosuspend requests
 
   unsigned long timer_expires;
     - timer expiration time, in jiffies (if this is different from zero, the
@@ -230,6 +232,28 @@ defined in include/linux/pm.h:
       interface; it may only be modified with the help of the pm_runtime_allow()
       and pm_runtime_forbid() helper functions
 
+  unsigned int no_callbacks;
+    - indicates that the device does not use the run-time PM callbacks (see
+      Section 8); it may be modified only by the pm_runtime_no_callbacks()
+      helper function
+
+  unsigned int use_autosuspend;
+    - indicates that the device's driver supports delayed autosuspend (see
+      Section 9); it may be modified only by the
+      pm_runtime{_dont}_use_autosuspend() helper functions
+
+  unsigned int timer_autosuspends;
+    - indicates that the PM core should attempt to carry out an autosuspend
+      when the timer expires rather than a normal suspend
+
+  int autosuspend_delay;
+    - the delay time (in milliseconds) to be used for autosuspend
+
+  unsigned long last_busy;
+    - the time (in jiffies) when the pm_runtime_mark_last_busy() helper
+      function was last called for this device; used in calculating inactivity
+      periods for autosuspend
+
 All of the above fields are members of the 'power' member of 'struct device'.
 
 4. Run-time PM Device Helper Functions
@@ -255,6 +279,12 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt
       to suspend the device again in future
 
+  int pm_runtime_autosuspend(struct device *dev);
+    - same as pm_runtime_suspend() except that the autosuspend delay is taken
+      into account; if pm_runtime_autosuspend_expiration() says the delay has
+      not yet expired then an autosuspend is scheduled for the appropriate time
+      and 0 is returned
+
   int pm_runtime_resume(struct device *dev);
     - execute the subsystem-level resume callback for the device; returns 0 on
       success, 1 if the device's run-time PM status was already 'active' or
@@ -267,6 +297,11 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       device (the request is represented by a work item in pm_wq); returns 0 on
       success or error code if the request has not been queued up
 
+  int pm_request_autosuspend(struct device *dev);
+    - schedule the execution of the subsystem-level suspend callback for the
+      device when the autosuspend delay has expired; if the delay has already
+      expired then the work item is queued up immediately
+
   int pm_schedule_suspend(struct device *dev, unsigned int delay);
     - schedule the execution of the subsystem-level suspend callback for the
       device in future, where 'delay' is the time to wait before queuing up a
@@ -298,12 +333,20 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
     - decrement the device's usage counter
 
   int pm_runtime_put(struct device *dev);
-    - decrement the device's usage counter, run pm_request_idle(dev) and return
-      its result
+    - decrement the device's usage counter; if the result is 0 then run
+      pm_request_idle(dev) and return its result
+
+  int pm_runtime_put_autosuspend(struct device *dev);
+    - decrement the device's usage counter; if the result is 0 then run
+      pm_request_autosuspend(dev) and return its result
 
   int pm_runtime_put_sync(struct device *dev);
-    - decrement the device's usage counter, run pm_runtime_idle(dev) and return
-      its result
+    - decrement the device's usage counter; if the result is 0 then run
+      pm_runtime_idle(dev) and return its result
+
+  int pm_runtime_put_sync_autosuspend(struct device *dev);
+    - decrement the device's usage counter; if the result is 0 then run
+      pm_runtime_autosuspend(dev) and return its result
 
   void pm_runtime_enable(struct device *dev);
     - enable the run-time PM helper functions to run the device bus type's
@@ -349,19 +392,51 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       counter (used by the /sys/devices/.../power/control interface to
       effectively prevent the device from being power managed at run time)
 
+  void pm_runtime_no_callbacks(struct device *dev);
+    - set the power.no_callbacks flag for the device and remove the run-time
+      PM attributes from /sys/devices/.../power (or prevent them from being
+      added when the device is registered)
+
+  void pm_runtime_mark_last_busy(struct device *dev);
+    - set the power.last_busy field to the current time
+
+  void pm_runtime_use_autosuspend(struct device *dev);
+    - set the power.use_autosuspend flag, enabling autosuspend delays
+
+  void pm_runtime_dont_use_autosuspend(struct device *dev);
+    - clear the power.use_autosuspend flag, disabling autosuspend delays
+
+  void pm_runtime_set_autosuspend_delay(struct device *dev, int delay);
+    - set the power.autosuspend_delay value to 'delay' (expressed in
+      milliseconds); if 'delay' is negative then run-time suspends are
+      prevented
+
+  unsigned long pm_runtime_autosuspend_expiration(struct device *dev);
+    - calculate the time when the current autosuspend delay period will expire,
+      based on power.last_busy and power.autosuspend_delay; if the delay time
+      is 1000 ms or larger then the expiration time is rounded up to the
+      nearest second; returns 0 if the delay period has already expired or
+      power.use_autosuspend isn't set, otherwise returns the expiration time
+      in jiffies
+
 It is safe to execute the following helper functions from interrupt context:
 
 pm_request_idle()
+pm_request_autosuspend()
 pm_schedule_suspend()
 pm_request_resume()
 pm_runtime_get_noresume()
 pm_runtime_get()
 pm_runtime_put_noidle()
 pm_runtime_put()
+pm_runtime_put_autosuspend()
+pm_runtime_enable()
 pm_suspend_ignore_children()
 pm_runtime_set_active()
 pm_runtime_set_suspended()
-pm_runtime_enable()
+pm_runtime_suspended()
+pm_runtime_mark_last_busy()
+pm_runtime_autosuspend_expiration()
 
 5. Run-time PM Initialization, Device Probing and Removal
 
@@ -524,3 +599,141 @@ poweroff and run-time suspend callback, and similarly for system resume, thaw,
 restore, and run-time resume, can achieve this with the help of the
 UNIVERSAL_DEV_PM_OPS macro defined in include/linux/pm.h (possibly setting its
 last argument to NULL).
+
+8. "No-Callback" Devices
+
+Some "devices" are only logical sub-devices of their parent and cannot be
+power-managed on their own.  (The prototype example is a USB interface.  Entire
+USB devices can go into low-power mode or send wake-up requests, but neither is
+possible for individual interfaces.)  The drivers for these devices have no
+need of run-time PM callbacks; if the callbacks did exist, ->runtime_suspend()
+and ->runtime_resume() would always return 0 without doing anything else and
+->runtime_idle() would always call pm_runtime_suspend().
+
+Subsystems can tell the PM core about these devices by calling
+pm_runtime_no_callbacks().  This should be done after the device structure is
+initialized and before it is registered (although after device registration is
+also okay).  The routine will set the device's power.no_callbacks flag and
+prevent the non-debugging run-time PM sysfs attributes from being created.
+
+When power.no_callbacks is set, the PM core will not invoke the
+->runtime_idle(), ->runtime_suspend(), or ->runtime_resume() callbacks.
+Instead it will assume that suspends and resumes always succeed and that idle
+devices should be suspended.
+
+As a consequence, the PM core will never directly inform the device's subsystem
+or driver about run-time power changes.  Instead, the driver for the device's
+parent must take responsibility for telling the device's driver when the
+parent's power state changes.
+
+9. Autosuspend, or automatically-delayed suspends
+
+Changing a device's power state isn't free; it requires both time and energy.
+A device should be put in a low-power state only when there's some reason to
+think it will remain in that state for a substantial time.  A common heuristic
+says that a device which hasn't been used for a while is liable to remain
+unused; following this advice, drivers should not allow devices to be suspended
+at run-time until they have been inactive for some minimum period.  Even when
+the heuristic ends up being non-optimal, it will still prevent devices from
+"bouncing" too rapidly between low-power and full-power states.
+
+The term "autosuspend" is an historical remnant.  It doesn't mean that the
+device is automatically suspended (the subsystem or driver still has to call
+the appropriate PM routines); rather it means that run-time suspends will
+automatically be delayed until the desired period of inactivity has elapsed.
+
+Inactivity is determined based on the power.last_busy field.  Drivers should
+call pm_runtime_mark_last_busy() to update this field after carrying out I/O,
+typically just before calling pm_runtime_put_autosuspend().  The desired length
+of the inactivity period is a matter of policy.  Subsystems can set this length
+initially by calling pm_runtime_set_autosuspend_delay(), but after device
+registration the length should be controlled by user space, using the
+/sys/devices/.../power/autosuspend_delay_ms attribute.
+
+In order to use autosuspend, subsystems or drivers must call
+pm_runtime_use_autosuspend() (preferably before registering the device), and
+thereafter they should use the various *_autosuspend() helper functions instead
+of the non-autosuspend counterparts:
+
+	Instead of: pm_runtime_suspend    use: pm_runtime_autosuspend;
+	Instead of: pm_schedule_suspend   use: pm_request_autosuspend;
+	Instead of: pm_runtime_put        use: pm_runtime_put_autosuspend;
+	Instead of: pm_runtime_put_sync   use: pm_runtime_put_sync_autosuspend.
+
+Drivers may also continue to use the non-autosuspend helper functions; they
+will behave normally, not taking the autosuspend delay into account.
+Similarly, if the power.use_autosuspend field isn't set then the autosuspend
+helper functions will behave just like the non-autosuspend counterparts.
+
+The implementation is well suited for asynchronous use in interrupt contexts.
+However such use inevitably involves races, because the PM core can't
+synchronize ->runtime_suspend() callbacks with the arrival of I/O requests.
+This synchronization must be handled by the driver, using its private lock.
+Here is a schematic pseudo-code example:
+
+	foo_read_or_write(struct foo_priv *foo, void *data)
+	{
+		lock(&foo->private_lock);
+		add_request_to_io_queue(foo, data);
+		if (foo->num_pending_requests++ == 0)
+			pm_runtime_get(&foo->dev);
+		if (!foo->is_suspended)
+			foo_process_next_request(foo);
+		unlock(&foo->private_lock);
+	}
+
+	foo_io_completion(struct foo_priv *foo, void *req)
+	{
+		lock(&foo->private_lock);
+		if (--foo->num_pending_requests == 0) {
+			pm_runtime_mark_last_busy(&foo->dev);
+			pm_runtime_put_autosuspend(&foo->dev);
+		} else {
+			foo_process_next_request(foo);
+		}
+		unlock(&foo->private_lock);
+		/* Send req result back to the user ... */
+	}
+
+	int foo_runtime_suspend(struct device *dev)
+	{
+		struct foo_priv foo = container_of(dev, ...);
+		int ret = 0;
+
+		lock(&foo->private_lock);
+		if (foo->num_pending_requests > 0) {
+			ret = -EBUSY;
+		} else {
+			/* ... suspend the device ... */
+			foo->is_suspended = 1;
+		}
+		unlock(&foo->private_lock);
+		return ret;
+	}
+
+	int foo_runtime_resume(struct device *dev)
+	{
+		struct foo_priv foo = container_of(dev, ...);
+
+		lock(&foo->private_lock);
+		/* ... resume the device ... */
+		foo->is_suspended = 0;
+		pm_runtime_mark_last_busy(&foo->dev);
+		if (foo->num_pending_requests > 0)
+			foo_process_requests(foo);
+		unlock(&foo->private_lock);
+		return 0;
+	}
+
+The important point is that after foo_io_completion() asks for an autosuspend,
+the foo_runtime_suspend() callback may race with foo_read_or_write().
+Therefore foo_runtime_suspend() has to check whether there are any pending I/O
+requests (while holding the private lock) before allowing the suspend to
+proceed.
+
+In addition, the power.autosuspend_delay field can be changed by user space at
+any time.  If a driver cares about this, it can call
+pm_runtime_autosuspend_expiration() from within the ->runtime_suspend()
+callback while holding its private lock.  If the function returns a nonzero
+value then the delay has not yet expired and the callback should return
+-EAGAIN.
diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt
index 514b94fc931e..1bdfa0443773 100644
--- a/Documentation/power/s2ram.txt
+++ b/Documentation/power/s2ram.txt
@@ -49,6 +49,13 @@ machine that doesn't boot) is:
    device (lspci and /sys/devices/pci* is your friend), and see if you can
    fix it, disable it, or trace into its resume function.
 
+   If no device matches the hash (or any matches appear to be false positives),
+   the culprit may be a device from a loadable kernel module that is not loaded
+   until after the hash is checked. You can check the hash against the current
+   devices again after more modules are loaded using sysfs:
+
+	cat /sys/power/pm_trace_dev_match
+
 For example, the above happens to be the VGA device on my EVO, which I
 used to run with "radeonfb" (it's an ATI Radeon mobility). It turns out
 that "radeonfb" simply cannot resume that device - it tries to set the
diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
index 9d60ab717a7b..ea718891a665 100644
--- a/Documentation/power/swsusp.txt
+++ b/Documentation/power/swsusp.txt
@@ -66,7 +66,8 @@ swsusp saves the state of the machine into active swaps and then reboots or
 powerdowns.  You must explicitly specify the swap partition to resume from with
 ``resume='' kernel option. If signature is found it loads and restores saved
 state. If the option ``noresume'' is specified as a boot parameter, it skips
-the resuming.
+the resuming.  If the option ``hibernate=nocompress'' is specified as a boot
+parameter, it saves hibernation image without compression.
 
 In the meantime while the system is suspended you should not add/remove any
 of the hardware, write to the filesystems, etc.
diff --git a/Documentation/power/tricks.txt b/Documentation/power/tricks.txt
index 3b26bb502a4a..a1b8f7249f4c 100644
--- a/Documentation/power/tricks.txt
+++ b/Documentation/power/tricks.txt
@@ -1,6 +1,6 @@
 	swsusp/S3 tricks
 	~~~~~~~~~~~~~~~~
-Pavel Machek <pavel@suse.cz>
+Pavel Machek <pavel@ucw.cz>
 
 If you want to trick swsusp/S3 into working, you might want to try:
 
diff --git a/Documentation/power/video.txt b/Documentation/power/video.txt
index 2b358498d095..3e6272bc4472 100644
--- a/Documentation/power/video.txt
+++ b/Documentation/power/video.txt
@@ -67,11 +67,11 @@ There are a few types of systems where video works after S3 resume:
   POSTing bios works. Ole Rohne has patch to do just that at
   http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
 
-(8) on some systems, you can use the video_post utility mentioned here:
-  http://bugzilla.kernel.org/show_bug.cgi?id=3670. Do echo 3 > /sys/power/state
-  && /usr/sbin/video_post - which will initialize the display in console mode.
-  If  you are in X, you can switch to a virtual terminal and back to X using
-  CTRL+ALT+F1 - CTRL+ALT+F7 to get the display working in graphical mode again.
+(8) on some systems, you can use the video_post utility and or 
+  do echo 3 > /sys/power/state  && /usr/sbin/video_post - which will 
+  initialize the display in console mode. If you are in X, you can switch
+  to a virtual terminal and back to X using  CTRL+ALT+F1 - CTRL+ALT+F7 to get
+  the display working in graphical mode again.
 
 Now, if you pass acpi_sleep=something, and it does not work with your
 bios, you'll get a hard crash during resume. Be careful. Also it is
@@ -177,7 +177,7 @@ Mainboard	    Graphics card                 hack (or "how to do it")
 Asus A7V8X	    nVidia RIVA TNT2 model 64	  s3_bios,s3_mode (4)
 
 
-(*) from http://www.ubuntulinux.org/wiki/HoaryPMResults, not sure
+(*) from https://wiki.ubuntu.com/HoaryPMResults, not sure
     which options to use. If you know, please tell me.
 
 (***) To be tested with a newer kernel.
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 46d22105aa07..302db5da49b3 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -49,40 +49,13 @@ Table of Contents
       f) MDIO on GPIOs
       g) SPI busses
 
-  VII - Marvell Discovery mv64[345]6x System Controller chips
-    1) The /system-controller node
-    2) Child nodes of /system-controller
-      a) Marvell Discovery MDIO bus
-      b) Marvell Discovery ethernet controller
-      c) Marvell Discovery PHY nodes
-      d) Marvell Discovery SDMA nodes
-      e) Marvell Discovery BRG nodes
-      f) Marvell Discovery CUNIT nodes
-      g) Marvell Discovery MPSCROUTING nodes
-      h) Marvell Discovery MPSCINTR nodes
-      i) Marvell Discovery MPSC nodes
-      j) Marvell Discovery Watch Dog Timer nodes
-      k) Marvell Discovery I2C nodes
-      l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-      m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-      n) Marvell Discovery GPP (General Purpose Pins) nodes
-      o) Marvell Discovery PCI host bridge node
-      p) Marvell Discovery CPU Error nodes
-      q) Marvell Discovery SRAM Controller nodes
-      r) Marvell Discovery PCI Error Handler nodes
-      s) Marvell Discovery Memory Controller nodes
-
-  VIII - Specifying interrupt information for devices
+  VII - Specifying interrupt information for devices
     1) interrupts property
     2) interrupt-parent property
     3) OpenPIC Interrupt Controllers
     4) ISA Interrupt Controllers
 
-  IX - Specifying GPIO information for devices
-    1) gpios property
-    2) gpio-controller nodes
-
-  X - Specifying device power management information (sleep property)
+  VIII - Specifying device power management information (sleep property)
 
   Appendix A - Sample SOC node for MPC8540
 
@@ -1048,7 +1021,7 @@ IV - "dtc", the device tree compiler
 
 
 dtc source code can be found at
-<http://ozlabs.org/~dgibson/dtc/dtc.tar.gz>
+<http://git.jdl.com/gitweb/?p=dtc.git>
 
 WARNING: This version is still in early development stage; the
 resulting device-tree "blobs" have not yet been validated with the
diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt
index deb35de70988..b66cb6d31d69 100644
--- a/Documentation/powerpc/dts-bindings/fsl/diu.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt
@@ -4,10 +4,17 @@ The Freescale DIU is a LCD controller, with proper hardware, it can also
 drive DVI monitors.
 
 Required properties:
-- compatible : should be "fsl-diu".
+- compatible : should be "fsl,diu" or "fsl,mpc5121-diu".
 - reg : should contain at least address and length of the DIU register
   set.
-- Interrupts : one DIU interrupt should be describe here.
+- interrupts : one DIU interrupt should be described here.
+- interrupt-parent : the phandle for the interrupt controller that
+  services interrupts for this device.
+
+Optional properties:
+- edid : verbatim EDID data block describing attached display.
+  Data from the detailed timing descriptor will be used to
+  program the display controller.
 
 Example (MPC8610HPCD):
 	display@2c000 {
@@ -16,3 +23,12 @@ Example (MPC8610HPCD):
 		interrupts = <72 2>;
 		interrupt-parent = <&mpic>;
 	};
+
+Example for MPC5121:
+	display@2100 {
+		compatible = "fsl,mpc5121-diu";
+		reg = <0x2100 0x100>;
+		interrupts = <64 0x8>;
+		interrupt-parent = <&ipic>;
+		edid = [edid-data];
+	};
diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
index 8a0040738969..64bcb8be973c 100644
--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -14,6 +14,8 @@ Required properties:
     reports inverted write-protect state;
   - sdhci,1-bit-only : (optional) specifies that a controller can
     only handle 1-bit data transfers.
+  - sdhci,auto-cmd12: (optional) specifies that a controller can
+    only handle auto CMD12.
 
 Example:
 
diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index 50da20310585..1eacd6b20ed5 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -20,6 +20,7 @@ Recommended properties :
  - fsl,preserve-clocking : boolean; if defined, the clock settings
    from the bootloader are preserved (not touched).
  - clock-frequency : desired I2C bus clock frequency in Hz.
+ - fsl,timeout : I2C bus timeout in microseconds.
 
 Examples :
 
@@ -59,4 +60,5 @@ Examples :
 		interrupts = <43 2>;
 		interrupt-parent = <&mpic>;
 		clock-frequency = <400000>;
+		fsl,timeout = <10000>;
 	};
diff --git a/Documentation/powerpc/dts-bindings/fsl/spi.txt b/Documentation/powerpc/dts-bindings/fsl/spi.txt
index 80510c018eea..777abd7399d5 100644
--- a/Documentation/powerpc/dts-bindings/fsl/spi.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/spi.txt
@@ -1,7 +1,9 @@
 * SPI (Serial Peripheral Interface)
 
 Required properties:
-- cell-index : SPI controller index.
+- cell-index : QE SPI subblock index.
+		0: QE subblock SPI1
+		1: QE subblock SPI2
 - compatible : should be "fsl,spi".
 - mode : the SPI operation mode, it can be "cpu" or "cpu-qe".
 - reg : Offset and length of the register set for the device
@@ -29,3 +31,23 @@ Example:
 		gpios = <&gpio 18 1	// device reg=<0>
 			 &gpio 19 1>;	// device reg=<1>
 	};
+
+
+* eSPI (Enhanced Serial Peripheral Interface)
+
+Required properties:
+- compatible : should be "fsl,mpc8536-espi".
+- reg : Offset and length of the register set for the device.
+- interrupts : should contain eSPI interrupt, the device has one interrupt.
+- fsl,espi-num-chipselects : the number of the chipselect signals.
+
+Example:
+	spi@110000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc8536-espi";
+		reg = <0x110000 0x1000>;
+		interrupts = <53 0x2>;
+		interrupt-parent = <&mpic>;
+		fsl,espi-num-chipselects = <4>;
+	};
diff --git a/Documentation/powerpc/dts-bindings/fsl/usb.txt b/Documentation/powerpc/dts-bindings/fsl/usb.txt
index b00152402694..bd5723f0b67e 100644
--- a/Documentation/powerpc/dts-bindings/fsl/usb.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/usb.txt
@@ -8,6 +8,7 @@ and additions :
 Required properties :
  - compatible : Should be "fsl-usb2-mph" for multi port host USB
    controllers, or "fsl-usb2-dr" for dual role USB controllers
+   or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121
  - phy_type : For multi port host USB controllers, should be one of
    "ulpi", or "serial". For dual role USB controllers, should be
    one of "ulpi", "utmi", "utmi_wide", or "serial".
@@ -33,6 +34,12 @@ Recommended properties :
  - interrupt-parent : the phandle for the interrupt controller that
    services interrupts for this device.
 
+Optional properties :
+ - fsl,invert-drvvbus : boolean; for MPC5121 USB0 only. Indicates the
+   port power polarity of internal PHY signal DRVVBUS is inverted.
+ - fsl,invert-pwr-fault : boolean; for MPC5121 USB0 only. Indicates
+   the PWR_FAULT signal polarity is inverted.
+
 Example multi port host USB controller device node :
 	usb@22000 {
 		compatible = "fsl-usb2-mph";
@@ -57,3 +64,18 @@ Example dual role USB controller device node :
 		dr_mode = "otg";
 		phy = "ulpi";
 	};
+
+Example dual role USB controller device node for MPC5121ADS:
+
+	usb@4000 {
+		compatible = "fsl,mpc5121-usb2-dr";
+		reg = <0x4000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = < &ipic >;
+		interrupts = <44 0x8>;
+		dr_mode = "otg";
+		phy_type = "utmi_wide";
+		fsl,invert-drvvbus;
+		fsl,invert-pwr-fault;
+	};
diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.txt
index f93462c5db25..6d8be3468d7d 100644
--- a/Documentation/powerpc/hvcs.txt
+++ b/Documentation/powerpc/hvcs.txt
@@ -560,7 +560,7 @@ The proper channel for reporting bugs is either through the Linux OS
 distribution company that provided your OS or by posting issues to the
 PowerPC development mailing list at:
 
-linuxppc-dev@ozlabs.org
+linuxppc-dev@lists.ozlabs.org
 
 This request is to provide a documented and searchable public exchange
 of the problems and solutions surrounding this driver for the benefit of
diff --git a/Documentation/rt-mutex-design.txt b/Documentation/rt-mutex-design.txt
index 8df0b782c4d7..33ed8007a845 100644
--- a/Documentation/rt-mutex-design.txt
+++ b/Documentation/rt-mutex-design.txt
@@ -364,7 +364,7 @@ process this is rather easy to know what needs to be adjusted.
 
 The functions implementing the task adjustments are rt_mutex_adjust_prio,
 __rt_mutex_adjust_prio (same as the former, but expects the task pi_lock
-to already be taken), rt_mutex_get_prio, and rt_mutex_setprio.
+to already be taken), rt_mutex_getprio, and rt_mutex_setprio.
 
 rt_mutex_getprio and rt_mutex_setprio are only used in __rt_mutex_adjust_prio.
 
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 1eb576a023bd..86f9f74b2b34 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -2531,5 +2531,5 @@ Special Thanks
 ==============
 Special thanks to Neale Ferguson who maintains a much
 prettier HTML version of this page at
-http://penguinvm.princeton.edu/notes.html#Debug390
+http://linuxvm.org/penguinvm/
 Bob Grainger Stefan Bader & others for reporting bugs
diff --git a/Documentation/scsi/BusLogic.txt b/Documentation/scsi/BusLogic.txt
index 98023baa0f0d..d7fbc9488b98 100644
--- a/Documentation/scsi/BusLogic.txt
+++ b/Documentation/scsi/BusLogic.txt
@@ -47,7 +47,7 @@ tune driver performance and error recovery to their particular needs.
 The latest information on Linux support for BusLogic SCSI Host Adapters, as
 well as the most recent release of this driver and the latest firmware for the
 BT-948/958/958D, will always be available from my Linux Home Page at URL
-"http://www.dandelion.com/Linux/".
+"http://sourceforge.net/projects/dandelion/".
 
 Bug reports should be sent via electronic mail to "lnz@dandelion.com".  Please
 include with the bug report the complete configuration messages reported by the
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index e759e92e286d..337c924cc81f 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -807,7 +807,7 @@ Changes from 20040908 to 20040920
 	  lpfc_disc_done/lpfc_do_dpc cleanup - lpfc_disc_done can return
 	  void - move lpfc_do_dpc and lpfc_disc_done to lpfc_hbadisc.c -
 	  remove checking of list emptiness before calling lpfc_disc_done,
-	  it handles the emtpy list case just fine and the additional
+	  it handles the empty list case just fine and the additional
 	  instructions cost less then the bustlocked spinlock operations.
 	* Integrated patch from Christoph Hellwig: This adds a new 64bit
 	  counter instead, brd_no isn't reused anymore.  Also some tiny
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index 38e9e7cadc90..5e07d320817d 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -215,7 +215,7 @@ Older Version	: 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
 
 3.	Convert pci_module_init to pci_register_driver
 	Convert from pci_module_init to pci_register_driver
-	(from:http://kerneljanitors.org/TODO)
+	(from:http://kernelnewbies.org/KernelJanitors/TODO)
 		- Signed-off-by: Domen Puncer <domen@coderock.org>
 
 4.	Use the pre defined DMA mask constants from dma-mapping.h
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 30023568805e..00301ed9c371 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,50 @@
+1 Release Date    : Thur.  May 03, 2010 09:12:45 PST 2009 -
+			(emaild-id:megaraidlinux@lsi.com)
+			Bo Yang
+
+2 Current Version : 00.00.04.31-rc1
+3 Older Version   : 00.00.04.17.1-rc1
+
+1.	Add the Online Controller Reset (OCR) to the Driver.
+	OCR is the new feature for megaraid_sas driver which
+	will allow the fw to do the chip reset which will not
+	affact the OS behavious.
+
+	To add the OCR support, driver need to do:
+		a). reset the controller chips -- Xscale and Gen2 which
+		will change the function calls and add the reset function
+		related to this two chips.
+
+		b). during the reset, driver will store the pending cmds
+		which not returned by FW to driver's pending queue.  Driver
+		will re-issue those pending cmds again to FW after the OCR
+		finished.
+
+		c). In driver's timeout routine, driver will report to
+		OS as reset. Also driver's queue routine will block the
+		cmds until the OCR finished.
+
+		d). in Driver's ISR routine, if driver get the FW state as
+		state change, FW in Failure status and FW support online controller
+		reset (OCR), driver will start to do the controller reset.
+
+		e). In driver's IOCTL routine, the application cmds will wait for the
+		OCR to finish, then issue the cmds to FW.
+
+		f). Before driver kill adapter, driver will do last chance of
+		OCR to see if driver can bring back the FW.
+
+2.	Add the support update flag to the driver to tell LSI megaraid_sas
+	application which driver will support the device update.  So application
+	will not need to do the device update after application add/del the device
+	from the system.
+3.	In driver's timeout routine, driver will do three time reset if fw is in
+	failed state.  Driver will kill adapter if can't bring back FW after the
+	this three times reset.
+4.	Add the input parameter max_sectors to 1MB support to our GEN2 controller.
+	customer can use the input paramenter max_sectors to add 1MB support to GEN2
+	controller.
+
 1 Release Date    : Thur.  Oct 29, 2009 09:12:45 PST 2009 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Bo Yang
diff --git a/Documentation/scsi/FlashPoint.txt b/Documentation/scsi/FlashPoint.txt
index 1540a92f6d2b..5b5f29cb9f8b 100644
--- a/Documentation/scsi/FlashPoint.txt
+++ b/Documentation/scsi/FlashPoint.txt
@@ -13,7 +13,7 @@ operating system support to its BusLogic brand of FlashPoint Ultra SCSI
 host adapters.  All of BusLogic's other SCSI host adapters, including the
 MultiMaster line, currently support the Linux operating system.  Linux
 drivers and information will be available on October 15th at
-http://www.dandelion.com/Linux/.
+http://sourceforge.net/projects/dandelion/.
 
 "Mylex is committed to supporting the Linux community," says Peter Shambora,
 vice president of marketing for Mylex.  "We have supported Linux driver
@@ -27,7 +27,7 @@ Linux is a freely-distributed implementation of UNIX for Intel x86, Sun
 SPARC, SGI MIPS, Motorola 68k, Digital Alpha AXP and Motorola PowerPC
 machines.  It supports a wide range of software, including the X Window
 System, Emacs, and TCP/IP networking.  Further information is available at
-http://www.linux.org and http://www.ssc.com/linux.
+http://www.linux.org and http://www.ssc.com/.
 
 FlashPoint Host Adapters
 
diff --git a/Documentation/scsi/Mylex.txt b/Documentation/scsi/Mylex.txt
index cdf69293f7d5..3797f3e6c2b5 100644
--- a/Documentation/scsi/Mylex.txt
+++ b/Documentation/scsi/Mylex.txt
@@ -2,4 +2,4 @@ Please see the file README.BusLogic for information about Linux support for
 Mylex (formerly BusLogic) MultiMaster and FlashPoint SCSI Host Adapters.
 
 The Mylex DAC960 PCI RAID Controllers are now supported.  Please consult
-http://www.dandelion.com/Linux/ for further information on the DAC960 driver.
+http://sourceforge.net/projects/dandelion for further information on the DAC960 driver.
diff --git a/Documentation/scsi/NinjaSCSI.txt b/Documentation/scsi/NinjaSCSI.txt
index 3229b64cf24e..ac8db8ceec77 100644
--- a/Documentation/scsi/NinjaSCSI.txt
+++ b/Documentation/scsi/NinjaSCSI.txt
@@ -3,8 +3,6 @@
 
 1. Comment
  This is Workbit corp.'s(http://www.workbit.co.jp/) NinjaSCSI-3
-(http://www.workbit.co.jp/ts/z_nj3r.html) and NinjaSCSI-32Bi
-(http://www.workbit.co.jp/ts/z_njsc32bi.html) PCMCIA card driver module
 for Linux.
 
 2. My Linux environment
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index c014eccaf19f..16e054c9c70b 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -447,7 +447,7 @@ The following information is available in this file:
       http://www.adaptec.com/buy-cables/.
 
    Europe
-    - Visit our Web site at http://www.adaptec-europe.com/.
+    - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
     - To speak with a Technical Support Specialist, call, or email,
       * German:  +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
         http://ask-de.adaptec.com/.
diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.txt
index b7e238cbb5a7..18f8d1905e6a 100644
--- a/Documentation/scsi/aic7xxx.txt
+++ b/Documentation/scsi/aic7xxx.txt
@@ -344,7 +344,7 @@ The following information is available in this file:
       http://www.adaptec.com/buy-cables/.
 
    Europe
-    - Visit our Web site at http://www.adaptec-europe.com/.
+    - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
     - To speak with a Technical Support Specialist, call, or email,
       * German:  +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
         http://ask-de.adaptec.com/.
diff --git a/Documentation/scsi/hpsa.txt b/Documentation/scsi/hpsa.txt
new file mode 100644
index 000000000000..dca658362cbf
--- /dev/null
+++ b/Documentation/scsi/hpsa.txt
@@ -0,0 +1,107 @@
+
+HPSA - Hewlett Packard Smart Array driver
+-----------------------------------------
+
+This file describes the hpsa SCSI driver for HP Smart Array controllers.
+The hpsa driver is intended to supplant the cciss driver for newer
+Smart Array controllers.  The hpsa driver is a SCSI driver, while the
+cciss driver is a "block" driver.  Actually cciss is both a block
+driver (for logical drives) AND a SCSI driver (for tape drives). This
+"split-brained" design of the cciss driver is a source of excess
+complexity and eliminating that complexity is one of the reasons
+for hpsa to exist.
+
+Supported devices:
+------------------
+
+Smart Array P212
+Smart Array P410
+Smart Array P410i
+Smart Array P411
+Smart Array P812
+Smart Array P712m
+Smart Array P711m
+StorageWorks P1210m
+
+Additionally, older Smart Arrays may work with the hpsa driver if the kernel
+boot parameter "hpsa_allow_any=1" is specified, however these are not tested
+nor supported by HP with this driver.  For older Smart Arrays, the cciss
+driver should still be used.
+
+HPSA specific entries in /sys
+-----------------------------
+
+  In addition to the generic SCSI attributes available in /sys, hpsa supports
+  the following attributes:
+
+  HPSA specific host attributes:
+  ------------------------------
+
+  /sys/class/scsi_host/host*/rescan
+  /sys/class/scsi_host/host*/firmware_revision
+
+  the host "rescan" attribute is a write only attribute.  Writing to this
+  attribute will cause the driver to scan for new, changed, or removed devices
+  (e.g. hot-plugged tape drives, or newly configured or deleted logical drives,
+  etc.) and notify the SCSI midlayer of any changes detected.  Normally this is
+  triggered automatically by HP's Array Configuration Utility (either the GUI or
+  command line variety) so for logical drive changes, the user should not
+  normally have to use this.  It may be useful when hot plugging devices like
+  tape drives, or entire storage boxes containing pre-configured logical drives.
+
+  The "firmware_revision" attribute contains the firmware version of the Smart Array.
+  For example:
+
+	root@host:/sys/class/scsi_host/host4# cat firmware_revision
+	7.14
+
+  HPSA specific disk attributes:
+  ------------------------------
+
+  /sys/class/scsi_disk/c:b:t:l/device/unique_id
+  /sys/class/scsi_disk/c:b:t:l/device/raid_level
+  /sys/class/scsi_disk/c:b:t:l/device/lunid
+
+  (where c:b:t:l are the controller, bus, target and lun of the device)
+
+  For example:
+
+	root@host:/sys/class/scsi_disk/4:0:0:0/device# cat unique_id
+	600508B1001044395355323037570F77
+	root@host:/sys/class/scsi_disk/4:0:0:0/device# cat lunid
+	0x0000004000000000
+	root@host:/sys/class/scsi_disk/4:0:0:0/device# cat raid_level
+	RAID 0
+
+HPSA specific ioctls:
+---------------------
+
+  For compatibility with applications written for the cciss driver, many, but
+  not all of the ioctls supported by the cciss driver are also supported by the
+  hpsa driver.  The data structures used by these are described in
+  include/linux/cciss_ioctl.h
+
+  CCISS_DEREGDISK
+  CCISS_REGNEWDISK
+  CCISS_REGNEWD
+
+  The above three ioctls all do exactly the same thing, which is to cause the driver
+  to rescan for new devices.  This does exactly the same thing as writing to the
+  hpsa specific host "rescan" attribute.
+
+  CCISS_GETPCIINFO
+
+	Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID).
+
+  CCISS_GETDRIVVER
+
+	Returns driver version in three bytes encoded as:
+		(major_version << 16) | (minor_version << 8) | (subminor_version)
+
+  CCISS_PASSTHRU
+  CCISS_BIG_PASSTHRU
+
+	Allows "BMIC" and "CISS" commands to be passed through to the Smart Array.
+	These are used extensively by the HP Array Configuration Utility, SNMP storage
+	agents, etc.  See cciss_vol_status at http://cciss.sf.net for some examples.
+
diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt
index 3920f28710c4..45d61ad8c6f7 100644
--- a/Documentation/scsi/ibmmca.txt
+++ b/Documentation/scsi/ibmmca.txt
@@ -1109,7 +1109,7 @@
      Q: Where can I find the latest info about this driver?
      A: See the file MAINTAINERS for the current WWW-address, which offers
         updates, info and Q/A lists. At this file's origin, the webaddress
-	was: http://www.uni-mainz.de/~langm000/linux.html
+	was: http://www.staff.uni-mainz.de/mlang/linux.html
      Q: My SCSI-adapter is not recognized by the driver, what can I do?
      A: Just force it to be recognized by kernel parameters. See section 5.1.
         If this really happens, do also send e-mail to the maintainer, as
diff --git a/Documentation/scsi/osst.txt b/Documentation/scsi/osst.txt
index 2b21890bc983..ad86c6d1e898 100644
--- a/Documentation/scsi/osst.txt
+++ b/Documentation/scsi/osst.txt
@@ -135,7 +135,7 @@ The driver development is coordinated through a mailing list
 a CVS repository and some web pages. 
 The tester's pages which contain recent news and updated drivers to download
 can be found on
-http://linux1.onstream.nl/test/
+http://sourceforge.net/projects/osst/
 
 If you find any problems, please have a look at the tester's page in order
 to see whether the problem is already known and solved. Otherwise, please
diff --git a/Documentation/scsi/ppa.txt b/Documentation/scsi/ppa.txt
index 067ac394e0b2..05ff47dbe8d1 100644
--- a/Documentation/scsi/ppa.txt
+++ b/Documentation/scsi/ppa.txt
@@ -1,13 +1,13 @@
 -------- Terse where to get ZIP Drive help info --------
 
 General Iomega ZIP drive page for Linux:
-http://www.torque.net/~campbell/
+http://web.archive.org/web/*/http://www.torque.net/~campbell/
 
 Driver archive for old drivers:
-http://www.torque.net/~campbell/ppa/
+http://web.archive.org/web/*/http://www.torque.net/~campbell/ppa
 
 Linux Parport page (parallel port)
-http://www.torque.net/parport/
+http://web.archive.org/web/*/http://www.torque.net/parport/
 
 Email list for Linux Parport
 linux-parport@torque.net
diff --git a/Documentation/scsi/scsi-generic.txt b/Documentation/scsi/scsi-generic.txt
index c38e2b3648e4..0a22ab8ea0c1 100644
--- a/Documentation/scsi/scsi-generic.txt
+++ b/Documentation/scsi/scsi-generic.txt
@@ -34,11 +34,11 @@ http://www.tldp.org/HOWTO/SCSI-Generic-HOWTO
 This describes the sg version 3 driver found in the lk 2.4 series.
 The LDP renders documents in single and multiple page HTML, postscript
 and pdf. This document can also be found at:
-http://www.torque.net/sg/p/sg_v3_ho.html
+http://sg.danny.cz/sg/p/sg_v3_ho.html
 
 Documentation for the version 2 sg driver found in the lk 2.2 series can
-be found at http://www.torque.net/sg/p/scsi-generic.txt . A larger version
-is at:  http://www.torque.net/sg/p/scsi-generic_long.txt .
+be found at http://sg.danny.cz/sg/. A larger version
+is at: http://sg.danny.cz/sg/p/scsi-generic_long.txt.
 
 The original documentation for the sg driver (prior to lk 2.2.6) can be
 found at http://www.torque.net/sg/p/original/SCSI-Programming-HOWTO.txt
@@ -61,7 +61,7 @@ There are two packages of sg utilities:
   - sg_utils    for the sg version 2 (and original) driver found in lk 2.2
                 and earlier
 Both packages will work in the lk 2.4 series however sg3_utils offers more
-capabilities. They can be found at: http://www.torque.net/sg and 
+capabilities. They can be found at: http://sg.danny.cz/sg/sg3_utils.html and 
 freshmeat.net
 
 Another approach is to look at the applications that use the sg driver.
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
new file mode 100644
index 000000000000..21e5798526ee
--- /dev/null
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -0,0 +1,139 @@
+                          SCSI Kernel Parameters
+                          ~~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+	advansys=	[HW,SCSI]
+			See header of drivers/scsi/advansys.c.
+
+	aha152x=	[HW,SCSI]
+			See Documentation/scsi/aha152x.txt.
+
+	aha1542=	[HW,SCSI]
+			Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
+
+	aic7xxx=	[HW,SCSI]
+			See Documentation/scsi/aic7xxx.txt.
+
+	aic79xx=	[HW,SCSI]
+			See Documentation/scsi/aic79xx.txt.
+
+	atascsi=	[HW,SCSI] Atari SCSI
+
+	BusLogic=	[HW,SCSI]
+			See drivers/scsi/BusLogic.c, comment before function
+			BusLogic_ParseDriverOptions().
+
+	dtc3181e=	[HW,SCSI]
+
+	eata=		[HW,SCSI]
+
+	fd_mcs=		[HW,SCSI]
+			See header of drivers/scsi/fd_mcs.c.
+
+	fdomain=	[HW,SCSI]
+			See header of drivers/scsi/fdomain.c.
+
+	gdth=		[HW,SCSI]
+			See header of drivers/scsi/gdth.c.
+
+	gvp11=		[HW,SCSI]
+
+	ibmmcascsi=	[HW,MCA,SCSI] IBM MicroChannel SCSI adapter
+			See Documentation/mca.txt.
+
+	in2000=		[HW,SCSI]
+			See header of drivers/scsi/in2000.c.
+
+	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller
+			See header of drivers/scsi/ips.c.
+
+	mac5380=	[HW,SCSI] Format:
+			<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
+
+	max_luns=	[SCSI] Maximum number of LUNs to probe.
+			Should be between 1 and 2^32-1.
+
+	max_report_luns=
+			[SCSI] Maximum number of LUNs received.
+			Should be between 1 and 16384.
+
+	NCR_D700=	[HW,SCSI]
+			See header of drivers/scsi/NCR_D700.c.
+
+	ncr5380=	[HW,SCSI]
+
+	ncr53c400=	[HW,SCSI]
+
+	ncr53c400a=	[HW,SCSI]
+
+	ncr53c406a=	[HW,SCSI]
+
+	ncr53c8xx=	[HW,SCSI]
+
+	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.
+
+	osst=		[HW,SCSI] SCSI Tape Driver
+			Format: <buffer_size>,<write_threshold>
+			See also Documentation/scsi/st.txt.
+
+	pas16=		[HW,SCSI]
+			See header of drivers/scsi/pas16.c.
+
+	scsi_debug_*=	[SCSI]
+			See drivers/scsi/scsi_debug.c.
+
+	scsi_default_dev_flags=
+			[SCSI] SCSI default device flags
+			Format: <integer>
+
+	scsi_dev_flags=	[SCSI] Black/white list entry for vendor and model
+			Format: <vendor>:<model>:<flags>
+			(flags are integer value)
+
+	scsi_logging_level=	[SCSI] a bit mask of logging levels
+			See drivers/scsi/scsi_logging.h for bits.  Also
+			settable via sysctl at dev.scsi.logging_level
+			(/proc/sys/dev/scsi/logging_level).
+			There is also a nice 'scsi_logging_level' script in the
+			S390-tools package, available for download at
+			http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
+
+	scsi_mod.scan=	[SCSI] sync (default) scans SCSI busses as they are
+			discovered.  async scans them in kernel threads,
+			allowing boot to proceed.  none ignores them, expecting
+			user space to do the scan.
+
+	sim710=		[SCSI,HW]
+			See header of drivers/scsi/sim710.c.
+
+	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
+			See Documentation/scsi/st.txt.
+
+	sym53c416=	[HW,SCSI]
+			See header of drivers/scsi/sym53c416.c.
+
+	t128=		[HW,SCSI]
+			See header of drivers/scsi/t128.c.
+
+	tmscsim=	[HW,SCSI]
+			See comment before function dc390_setup() in
+			drivers/scsi/tmscsim.c.
+
+	u14-34f=	[HW,SCSI] UltraStor 14F/34F SCSI host adapter
+			See header of drivers/scsi/u14-34f.c.
+
+	wd33c93=	[HW,SCSI]
+			See header of drivers/scsi/wd33c93.c.
+
+	wd7000=		[HW,SCSI]
+			See header of drivers/scsi/wd7000.c.
diff --git a/Documentation/scsi/scsi.txt b/Documentation/scsi/scsi.txt
index dd1bbf4e98e3..3d99d38cb62a 100644
--- a/Documentation/scsi/scsi.txt
+++ b/Documentation/scsi/scsi.txt
@@ -4,8 +4,8 @@ The Linux Documentation Project (LDP) maintains a document describing
 the SCSI subsystem in the Linux kernel (lk) 2.4 series. See:
 http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO . The LDP has single
 and multiple page HTML renderings as well as postscript and pdf.
-It can also be found at http://www.torque.net/scsi/SCSI-2.4-HOWTO .
-
+It can also be found at:
+http://web.archive.org/web/*/http://www.torque.net/scsi/SCSI-2.4-HOWTO
 
 Notes on using modules in the SCSI subsystem
 ============================================
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index de67229251d8..570ef2b3d79b 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -43,7 +43,7 @@ There is a SCSI documentation directory within the kernel source tree,
 typically Documentation/scsi . Most documents are in plain
 (i.e. ASCII) text. This file is named scsi_mid_low_api.txt and can be 
 found in that directory. A more recent copy of this document may be found
-at http://www.torque.net/scsi/scsi_mid_low_api.txt.gz . 
+at http://web.archive.org/web/20070107183357rn_1/sg.torque.net/scsi/. 
 Many LLDs are documented there (e.g. aic7xxx.txt). The SCSI mid-level is
 briefly described in scsi.txt which contains a url to a document 
 describing the SCSI subsystem in the lk 2.4 series. Two upper level 
diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt
index 40752602c050..691ca292c24d 100644
--- a/Documentation/scsi/st.txt
+++ b/Documentation/scsi/st.txt
@@ -2,7 +2,7 @@ This file contains brief information about the SCSI tape driver.
 The driver is currently maintained by Kai Mäkisara (email
 Kai.Makisara@kolumbus.fi)
 
-Last modified: Sun Feb 24 21:59:07 2008 by kai.makisara
+Last modified: Sun Aug 29 18:25:47 2010 by kai.makisara
 
 
 BASICS
@@ -85,6 +85,17 @@ writing and the last operation has been a write. Two filemarks can be
 optionally written. In both cases end of data is signified by
 returning zero bytes for two consecutive reads.
 
+Writing filemarks without the immediate bit set in the SCSI command block acts
+as a synchronization point, i.e., all remaining data form the drive buffers is
+written to tape before the command returns. This makes sure that write errors
+are caught at that point, but this takes time. In some applications, several
+consecutive files must be written fast. The MTWEOFI operation can be used to
+write the filemarks without flushing the drive buffer. Writing filemark at
+close() is always flushing the drive buffers. However, if the previous
+operation is MTWEOFI, close() does not write a filemark. This can be used if
+the program wants to close/open the tape device between files and wants to
+skip waiting.
+
 If rewind, offline, bsf, or seek is done and previous tape operation was
 write, a filemark is written before moving tape.
 
@@ -301,6 +312,8 @@ MTBSR   Space backward over count records.
 MTFSS   Space forward over count setmarks.
 MTBSS   Space backward over count setmarks.
 MTWEOF  Write count filemarks.
+MTWEOFI	Write count filemarks with immediate bit set (i.e., does not
+	wait until data is on tape)
 MTWSM   Write count setmarks.
 MTREW   Rewind tape.
 MTOFFL  Set device off line (often rewind plus eject).
diff --git a/Documentation/serial/moxa-smartio b/Documentation/serial/moxa-smartio
index 5337e80a5b96..d10443918684 100644
--- a/Documentation/serial/moxa-smartio
+++ b/Documentation/serial/moxa-smartio
@@ -76,7 +76,7 @@ Content
    GNU General Public License in this version. Please refer to GNU General
    Public License announcement in each source code file for more detail.
 
-   In Moxa's Web sites, you may always find latest driver at http://web.moxa.com.
+   In Moxa's Web sites, you may always find latest driver at http://www.moxa.com/.
 
    This version of driver can be installed as Loadable Module (Module driver)
    or built-in into kernel (Static driver). You may refer to following
diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt
deleted file mode 100644
index 9dbf4470c7e1..000000000000
--- a/Documentation/slow-work.txt
+++ /dev/null
@@ -1,322 +0,0 @@
-		     ====================================
-		     SLOW WORK ITEM EXECUTION THREAD POOL
-		     ====================================
-
-By: David Howells <dhowells@redhat.com>
-
-The slow work item execution thread pool is a pool of threads for performing
-things that take a relatively long time, such as making mkdir calls.
-Typically, when processing something, these items will spend a lot of time
-blocking a thread on I/O, thus making that thread unavailable for doing other
-work.
-
-The standard workqueue model is unsuitable for this class of work item as that
-limits the owner to a single thread or a single thread per CPU.  For some
-tasks, however, more threads - or fewer - are required.
-
-There is just one pool per system.  It contains no threads unless something
-wants to use it - and that something must register its interest first.  When
-the pool is active, the number of threads it contains is dynamic, varying
-between a maximum and minimum setting, depending on the load.
-
-
-====================
-CLASSES OF WORK ITEM
-====================
-
-This pool support two classes of work items:
-
- (*) Slow work items.
-
- (*) Very slow work items.
-
-The former are expected to finish much quicker than the latter.
-
-An operation of the very slow class may do a batch combination of several
-lookups, mkdirs, and a create for instance.
-
-An operation of the ordinarily slow class may, for example, write stuff or
-expand files, provided the time taken to do so isn't too long.
-
-Operations of both types may sleep during execution, thus tying up the thread
-loaned to it.
-
-A further class of work item is available, based on the slow work item class:
-
- (*) Delayed slow work items.
-
-These are slow work items that have a timer to defer queueing of the item for
-a while.
-
-
-THREAD-TO-CLASS ALLOCATION
---------------------------
-
-Not all the threads in the pool are available to work on very slow work items.
-The number will be between one and one fewer than the number of active threads.
-This is configurable (see the "Pool Configuration" section).
-
-All the threads are available to work on ordinarily slow work items, but a
-percentage of the threads will prefer to work on very slow work items.
-
-The configuration ensures that at least one thread will be available to work on
-very slow work items, and at least one thread will be available that won't work
-on very slow work items at all.
-
-
-=====================
-USING SLOW WORK ITEMS
-=====================
-
-Firstly, a module or subsystem wanting to make use of slow work items must
-register its interest:
-
-	 int ret = slow_work_register_user(struct module *module);
-
-This will return 0 if successful, or a -ve error upon failure.  The module
-pointer should be the module interested in using this facility (almost
-certainly THIS_MODULE).
-
-
-Slow work items may then be set up by:
-
- (1) Declaring a slow_work struct type variable:
-
-	#include <linux/slow-work.h>
-
-	struct slow_work myitem;
-
- (2) Declaring the operations to be used for this item:
-
-	struct slow_work_ops myitem_ops = {
-		.get_ref = myitem_get_ref,
-		.put_ref = myitem_put_ref,
-		.execute = myitem_execute,
-	};
-
-     [*] For a description of the ops, see section "Item Operations".
-
- (3) Initialising the item:
-
-	slow_work_init(&myitem, &myitem_ops);
-
-     or:
-
-	delayed_slow_work_init(&myitem, &myitem_ops);
-
-     or:
-
-	vslow_work_init(&myitem, &myitem_ops);
-
-     depending on its class.
-
-A suitably set up work item can then be enqueued for processing:
-
-	int ret = slow_work_enqueue(&myitem);
-
-This will return a -ve error if the thread pool is unable to gain a reference
-on the item, 0 otherwise, or (for delayed work):
-
-	int ret = delayed_slow_work_enqueue(&myitem, my_jiffy_delay);
-
-
-The items are reference counted, so there ought to be no need for a flush
-operation.  But as the reference counting is optional, means to cancel
-existing work items are also included:
-
-	cancel_slow_work(&myitem);
-	cancel_delayed_slow_work(&myitem);
-
-can be used to cancel pending work.  The above cancel function waits for
-existing work to have been executed (or prevent execution of them, depending
-on timing).
-
-
-When all a module's slow work items have been processed, and the
-module has no further interest in the facility, it should unregister its
-interest:
-
-	slow_work_unregister_user(struct module *module);
-
-The module pointer is used to wait for all outstanding work items for that
-module before completing the unregistration.  This prevents the put_ref() code
-from being taken away before it completes.  module should almost certainly be
-THIS_MODULE.
-
-
-================
-HELPER FUNCTIONS
-================
-
-The slow-work facility provides a function by which it can be determined
-whether or not an item is queued for later execution:
-
-	bool queued = slow_work_is_queued(struct slow_work *work);
-
-If it returns false, then the item is not on the queue (it may be executing
-with a requeue pending).  This can be used to work out whether an item on which
-another depends is on the queue, thus allowing a dependent item to be queued
-after it.
-
-If the above shows an item on which another depends not to be queued, then the
-owner of the dependent item might need to wait.  However, to avoid locking up
-the threads unnecessarily be sleeping in them, it can make sense under some
-circumstances to return the work item to the queue, thus deferring it until
-some other items have had a chance to make use of the yielded thread.
-
-To yield a thread and defer an item, the work function should simply enqueue
-the work item again and return.  However, this doesn't work if there's nothing
-actually on the queue, as the thread just vacated will jump straight back into
-the item's work function, thus busy waiting on a CPU.
-
-Instead, the item should use the thread to wait for the dependency to go away,
-but rather than using schedule() or schedule_timeout() to sleep, it should use
-the following function:
-
-	bool requeue = slow_work_sleep_till_thread_needed(
-			struct slow_work *work,
-			signed long *_timeout);
-
-This will add a second wait and then sleep, such that it will be woken up if
-either something appears on the queue that could usefully make use of the
-thread - and behind which this item can be queued, or if the event the caller
-set up to wait for happens.  True will be returned if something else appeared
-on the queue and this work function should perhaps return, of false if
-something else woke it up.  The timeout is as for schedule_timeout().
-
-For example:
-
-	wq = bit_waitqueue(&my_flags, MY_BIT);
-	init_wait(&wait);
-	requeue = false;
-	do {
-		prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
-		if (!test_bit(MY_BIT, &my_flags))
-			break;
-		requeue = slow_work_sleep_till_thread_needed(&my_work,
-							     &timeout);
-	} while (timeout > 0 && !requeue);
-	finish_wait(wq, &wait);
-	if (!test_bit(MY_BIT, &my_flags)
-		goto do_my_thing;
-	if (requeue)
-		return; // to slow_work
-
-
-===============
-ITEM OPERATIONS
-===============
-
-Each work item requires a table of operations of type struct slow_work_ops.
-Only ->execute() is required; the getting and putting of a reference and the
-describing of an item are all optional.
-
- (*) Get a reference on an item:
-
-	int (*get_ref)(struct slow_work *work);
-
-     This allows the thread pool to attempt to pin an item by getting a
-     reference on it.  This function should return 0 if the reference was
-     granted, or a -ve error otherwise.  If an error is returned,
-     slow_work_enqueue() will fail.
-
-     The reference is held whilst the item is queued and whilst it is being
-     executed.  The item may then be requeued with the same reference held, or
-     the reference will be released.
-
- (*) Release a reference on an item:
-
-	void (*put_ref)(struct slow_work *work);
-
-     This allows the thread pool to unpin an item by releasing the reference on
-     it.  The thread pool will not touch the item again once this has been
-     called.
-
- (*) Execute an item:
-
-	void (*execute)(struct slow_work *work);
-
-     This should perform the work required of the item.  It may sleep, it may
-     perform disk I/O and it may wait for locks.
-
- (*) View an item through /proc:
-
-	void (*desc)(struct slow_work *work, struct seq_file *m);
-
-     If supplied, this should print to 'm' a small string describing the work
-     the item is to do.  This should be no more than about 40 characters, and
-     shouldn't include a newline character.
-
-     See the 'Viewing executing and queued items' section below.
-
-
-==================
-POOL CONFIGURATION
-==================
-
-The slow-work thread pool has a number of configurables:
-
- (*) /proc/sys/kernel/slow-work/min-threads
-
-     The minimum number of threads that should be in the pool whilst it is in
-     use.  This may be anywhere between 2 and max-threads.
-
- (*) /proc/sys/kernel/slow-work/max-threads
-
-     The maximum number of threads that should in the pool.  This may be
-     anywhere between min-threads and 255 or NR_CPUS * 2, whichever is greater.
-
- (*) /proc/sys/kernel/slow-work/vslow-percentage
-
-     The percentage of active threads in the pool that may be used to execute
-     very slow work items.  This may be between 1 and 99.  The resultant number
-     is bounded to between 1 and one fewer than the number of active threads.
-     This ensures there is always at least one thread that can process very
-     slow work items, and always at least one thread that won't.
-
-
-==================================
-VIEWING EXECUTING AND QUEUED ITEMS
-==================================
-
-If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available:
-
-	/sys/kernel/debug/slow_work/runqueue
-
-through which the list of work items being executed and the queues of items to
-be executed may be viewed.  The owner of a work item is given the chance to
-add some information of its own.
-
-The contents look something like the following:
-
-    THR PID   ITEM ADDR        FL MARK  DESC
-    === ===== ================ == ===== ==========
-      0  3005 ffff880023f52348  a 952ms FSC: OBJ17d3: LOOK
-      1  3006 ffff880024e33668  2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2
-      2  3165 ffff8800296dd180  a 424ms FSC: OBJ17e4: LOOK
-      3  4089 ffff8800262c8d78  a 212ms FSC: OBJ17ea: CRTN
-      4  4090 ffff88002792bed8  2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2
-      5  4092 ffff88002a0ef308  2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2
-      6  4094 ffff88002abaf4b8  2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2
-      7  4095 ffff88002bb188e0  a 388ms FSC: OBJ17e9: CRTN
-    vsq     - ffff880023d99668  1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2
-    vsq     - ffff8800295d1740  1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2
-    vsq     - ffff880025ba3308  1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2
-    vsq     - ffff880024ec83e0  1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2
-    vsq     - ffff880026618e00  1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2
-    vsq     - ffff880025a2a4b8  1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2
-    vsq     - ffff880023cbe6d8  9 212ms FSC: OBJ17eb: LOOK
-    vsq     - ffff880024d37590  9 212ms FSC: OBJ17ec: LOOK
-    vsq     - ffff880027746cb0  9 212ms FSC: OBJ17ed: LOOK
-    vsq     - ffff880024d37ae8  9 212ms FSC: OBJ17ee: LOOK
-    vsq     - ffff880024d37cb0  9 212ms FSC: OBJ17ef: LOOK
-    vsq     - ffff880025036550  9 212ms FSC: OBJ17f0: LOOK
-    vsq     - ffff8800250368e0  9 212ms FSC: OBJ17f1: LOOK
-    vsq     - ffff880025036aa8  9 212ms FSC: OBJ17f2: LOOK
-
-In the 'THR' column, executing items show the thread they're occupying and
-queued threads indicate which queue they're on.  'PID' shows the process ID of
-a slow-work thread that's executing something.  'FL' shows the work item flags.
-'MARK' indicates how long since an item was queued or began executing.  Lastly,
-the 'DESC' column permits the owner of an item to give some information.
-
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 2075bbb8b3e2..d0eb696d32e8 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -300,6 +300,74 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
            control correctly. If you have problems regarding this, try
            another ALSA compliant mixer (alsamixer works).
 
+  Module snd-azt1605
+  ------------------
+
+    Module for Aztech Sound Galaxy soundcards based on the Aztech AZT1605
+    chipset.
+
+    port	- port # for BASE (0x220,0x240,0x260,0x280)
+    wss_port	- port # for WSS (0x530,0x604,0xe80,0xf40)
+    irq		- IRQ # for WSS (7,9,10,11)
+    dma1	- DMA # for WSS playback (0,1,3)
+    dma2	- DMA # for WSS capture (0,1), -1 = disabled (default)
+    mpu_port	- port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
+    mpu_irq	- IRQ # for MPU-401 UART (3,5,7,9), -1 = disabled (default)
+    fm_port	- port # for OPL3 (0x388), -1 = disabled (default)
+
+    This module supports multiple cards. It does not support autoprobe: port,
+    wss_port, irq and dma1 have to be specified. The other values are
+    optional.
+
+    "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
+    or the value stored in the card's EEPROM for cards that have an EEPROM and
+    their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
+    be choosen freely from the options enumerated above.
+
+    If dma2 is specified and different from dma1, the card will operate in
+    full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
+    enable capture since only channels 0 and 1 are available for capture.
+
+    Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
+    mpu_port=0x330 mpu_irq=9 fm_port=0x388".
+
+    Whatever IRQ and DMA channels you pick, be sure to reserve them for
+    legacy ISA in your BIOS.
+
+  Module snd-azt2316
+  ------------------
+
+    Module for Aztech Sound Galaxy soundcards based on the Aztech AZT2316
+    chipset.
+
+    port	- port # for BASE (0x220,0x240,0x260,0x280)
+    wss_port	- port # for WSS (0x530,0x604,0xe80,0xf40)
+    irq		- IRQ # for WSS (7,9,10,11)
+    dma1	- DMA # for WSS playback (0,1,3)
+    dma2	- DMA # for WSS capture (0,1), -1 = disabled (default)
+    mpu_port	- port # for MPU-401 UART (0x300,0x330), -1 = disabled (default)
+    mpu_irq	- IRQ # for MPU-401 UART (5,7,9,10), -1 = disabled (default)
+    fm_port	- port # for OPL3 (0x388), -1 = disabled (default)
+
+    This module supports multiple cards. It does not support autoprobe: port,
+    wss_port, irq and dma1 have to be specified. The other values are
+    optional.
+
+    "port" needs to match the BASE ADDRESS jumper on the card (0x220 or 0x240)
+    or the value stored in the card's EEPROM for cards that have an EEPROM and
+    their "CONFIG MODE" jumper set to "EEPROM SETTING". The other values can
+    be choosen freely from the options enumerated above.
+
+    If dma2 is specified and different from dma1, the card will operate in
+    full-duplex mode. When dma1=3, only dma2=0 is valid and the only way to
+    enable capture since only channels 0 and 1 are available for capture.
+
+    Generic settings are "port=0x220 wss_port=0x530 irq=10 dma1=1 dma2=0
+    mpu_port=0x330 mpu_irq=9 fm_port=0x388".
+
+    Whatever IRQ and DMA channels you pick, be sure to reserve them for
+    legacy ISA in your BIOS.
+
   Module snd-aw2
   --------------
 
@@ -1285,7 +1353,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     about this driver.  Note that it has been discontinued, but the 
     Voyetra Turtle Beach knowledge base entry for it is still available
     at
-	http://www.turtlebeach.com/site/kb_ftp/790.asp
+	http://www.turtlebeach.com
 
   Module snd-msnd-pinnacle
   ------------------------
@@ -1641,20 +1709,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This card is also known as Audio Excel DSP 16 or Zoltrix AV302.
 
-  Module snd-sgalaxy
-  ------------------
-
-    Module for Aztech Sound Galaxy sound card.
-
-    sbport	- Port # for SB16 interface (0x220,0x240)
-    wssport	- Port # for WSS interface (0x530,0xe80,0xf40,0x604)
-    irq		- IRQ # (7,9,10,11)
-    dma1	- DMA #
-
-    This module supports multiple cards.
-
-    The power-management is supported.
-
   Module snd-sscape
   -----------------
 
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 1d38b0dfba95..37c6aad5e590 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -83,8 +83,8 @@ ALC269
 ======
   basic		Basic preset
   quanta	Quanta FL1
-  eeepc-p703	ASUS Eeepc P703 P900A
-  eeepc-p901	ASUS Eeepc P901 S101
+  laptop-amic	Laptops with analog-mic input
+  laptop-dmic	Laptops with digital-mic input
   fujitsu	FSC Amilo
   lifebook	Fujitsu Lifebook S6420
   auto		auto-config reading BIOS (default)
@@ -109,11 +109,18 @@ ALC662/663/272
   asus-mode4	ASUS
   asus-mode5	ASUS
   asus-mode6	ASUS
+  asus-mode7	ASUS
+  asus-mode8	ASUS
   dell		Dell with ALC272
   dell-zm1	Dell ZM1 with ALC272
   samsung-nc10	Samsung NC10 mini notebook
   auto		auto-config reading BIOS (default)
 
+ALC680
+======
+  base		Base model (ASUS NX90)
+  auto		auto-config reading BIOS (default)
+
 ALC882/883/885/888/889
 ======================
   3stack-dig	3-jack with SPDIF I/O
@@ -282,15 +289,19 @@ Conexant 5051
   hp		HP Spartan laptop
   hp-dv6736	HP dv6736
   hp-f700	HP Compaq Presario F700
+  ideapad	Lenovo IdeaPad laptop
   lenovo-x200	Lenovo X200 laptop
   toshiba	Toshiba Satellite M300
 
 Conexant 5066
 =============
   laptop	Basic Laptop config (default)
+  hp-laptop	HP laptops, e g G60
   dell-laptop	Dell laptops
+  dell-vostro	Dell Vostro
   olpc-xo-1_5	OLPC XO 1.5
   ideapad       Lenovo IdeaPad U150
+  thinkpad	Lenovo Thinkpad
 
 STAC9200
 ========
@@ -398,6 +409,7 @@ STAC92HD83*
   mic-ref	Reference board with power management for ports
   dell-s14	Dell laptop
   hp		HP laptops with (inverted) mute-LED
+  hp-dv7-4000	HP dv-7 4000
   auto		BIOS setup (default)
 
 STAC9872
@@ -410,3 +422,7 @@ Cirrus Logic CS4206/4207
   mbp55		MacBook Pro 5,5
   imac27	IMac 27 Inch
   auto		BIOS setup (default)
+
+VIA VT17xx/VT18xx/VT20xx
+========================
+  auto		BIOS setup (default)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index bdafdbd32561..c82beb007634 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -57,9 +57,11 @@ dead.  However, this detection isn't perfect on some devices.  In such
 a case, you can change the default method via `position_fix` option.
 
 `position_fix=1` means to use LPIB method explicitly.
-`position_fix=2` means to use the position-buffer.  0 is the default
-value, the automatic check and fallback to LPIB as described in the
-above.  If you get a problem of repeated sounds, this option might
+`position_fix=2` means to use the position-buffer.
+`position_fix=3` means to use a combination of both methods, needed
+for some VIA and ATI controllers.  0 is the default value for all other
+controllers, the automatic check and fallback to LPIB as described in
+the above.  If you get a problem of repeated sounds, this option might
 help.
 
 In addition to that, every controller is known to be broken regarding
@@ -562,7 +564,7 @@ compare the codec registers directly.
 Send a bug report either the followings:
 
 kernel-bugzilla::
-  http://bugme.linux-foundation.org/
+  https://bugzilla.kernel.org/
 alsa-devel ML::
   alsa-devel@alsa-project.org
 
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 07301de12cc4..7fcd1ad96fcc 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -103,6 +103,8 @@ card*/pcm*/xrun_debug
 	  bit 2 = Enable additional jiffies check
 	  bit 3 = Log hwptr update at each period interrupt
 	  bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
+	  bit 5 = Show last 10 positions on error
+	  bit 6 = Do above only once
 
 	When the bit 0 is set, the driver will show the messages to
 	kernel log when an xrun is detected.  The debug message is
@@ -122,6 +124,12 @@ card*/pcm*/xrun_debug
 	Bits 3 and 4 are for logging the hwptr records.  Note that
 	these will give flood of kernel messages.
 
+	When bit 5 is set, the driver logs the last 10 xrun errors and
+	the proc file shows each jiffies, position, period_size,
+	buffer_size, old_hw_ptr, and hw_ptr_base values.
+
+	When bit 6 is set, the full xrun log is shown only once.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 
diff --git a/Documentation/sound/alsa/alsa-parameters.txt b/Documentation/sound/alsa/alsa-parameters.txt
new file mode 100644
index 000000000000..0fa40679b080
--- /dev/null
+++ b/Documentation/sound/alsa/alsa-parameters.txt
@@ -0,0 +1,135 @@
+                          ALSA Kernel Parameters
+                          ~~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+	snd-ad1816a=	[HW,ALSA]
+
+	snd-ad1848=	[HW,ALSA]
+
+	snd-ali5451=	[HW,ALSA]
+
+	snd-als100=	[HW,ALSA]
+
+	snd-als4000=	[HW,ALSA]
+
+	snd-azt2320=	[HW,ALSA]
+
+	snd-cmi8330=	[HW,ALSA]
+
+	snd-cmipci=	[HW,ALSA]
+
+	snd-cs4231=	[HW,ALSA]
+
+	snd-cs4232=	[HW,ALSA]
+
+	snd-cs4236=	[HW,ALSA]
+
+	snd-cs4281=	[HW,ALSA]
+
+	snd-cs46xx=	[HW,ALSA]
+
+	snd-dt019x=	[HW,ALSA]
+
+	snd-dummy=	[HW,ALSA]
+
+	snd-emu10k1=	[HW,ALSA]
+
+	snd-ens1370=	[HW,ALSA]
+
+	snd-ens1371=	[HW,ALSA]
+
+	snd-es968=	[HW,ALSA]
+
+	snd-es1688=	[HW,ALSA]
+
+	snd-es18xx=	[HW,ALSA]
+
+	snd-es1938=	[HW,ALSA]
+
+	snd-es1968=	[HW,ALSA]
+
+	snd-fm801=	[HW,ALSA]
+
+	snd-gusclassic=	[HW,ALSA]
+
+	snd-gusextreme=	[HW,ALSA]
+
+	snd-gusmax=	[HW,ALSA]
+
+	snd-hdsp=	[HW,ALSA]
+
+	snd-ice1712=	[HW,ALSA]
+
+	snd-intel8x0=	[HW,ALSA]
+
+	snd-interwave=	[HW,ALSA]
+
+	snd-interwave-stb=
+			[HW,ALSA]
+
+	snd-korg1212=	[HW,ALSA]
+
+	snd-maestro3=	[HW,ALSA]
+
+	snd-mpu401=	[HW,ALSA]
+
+	snd-mtpav=	[HW,ALSA]
+
+	snd-nm256=	[HW,ALSA]
+
+	snd-opl3sa2=	[HW,ALSA]
+
+	snd-opti92x-ad1848=
+			[HW,ALSA]
+
+	snd-opti92x-cs4231=
+			[HW,ALSA]
+
+	snd-opti93x=	[HW,ALSA]
+
+	snd-pmac=	[HW,ALSA]
+
+	snd-rme32=	[HW,ALSA]
+
+	snd-rme96=	[HW,ALSA]
+
+	snd-rme9652=	[HW,ALSA]
+
+	snd-sb8=	[HW,ALSA]
+
+	snd-sb16=	[HW,ALSA]
+
+	snd-sbawe=	[HW,ALSA]
+
+	snd-serial=	[HW,ALSA]
+
+	snd-sgalaxy=	[HW,ALSA]
+
+	snd-sonicvibes=	[HW,ALSA]
+
+	snd-sun-amd7930=
+			[HW,ALSA]
+
+	snd-sun-cs4231=	[HW,ALSA]
+
+	snd-trident=	[HW,ALSA]
+
+	snd-usb-audio=	[HW,ALSA,USB]
+
+	snd-via82xx=	[HW,ALSA]
+
+	snd-virmidi=	[HW,ALSA]
+
+	snd-wavefront=	[HW,ALSA]
+
+	snd-ymfpci=	[HW,ALSA]
diff --git a/Documentation/sound/alsa/soc/DAI.txt b/Documentation/sound/alsa/soc/DAI.txt
index 0ebd7ea9706c..c9679264c559 100644
--- a/Documentation/sound/alsa/soc/DAI.txt
+++ b/Documentation/sound/alsa/soc/DAI.txt
@@ -13,7 +13,7 @@ frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97
 frame is 21uS long and is divided into 13 time slots.
 
 The AC97 specification can be found at :-
-http://www.intel.com/design/chipsets/audio/ac97_r23.pdf
+http://www.intel.com/p/en_US/business/design
 
 
 I2S
diff --git a/Documentation/sound/alsa/soc/codec.txt b/Documentation/sound/alsa/soc/codec.txt
index 1e95342ed72e..37ba3a72cb76 100644
--- a/Documentation/sound/alsa/soc/codec.txt
+++ b/Documentation/sound/alsa/soc/codec.txt
@@ -143,7 +143,7 @@ struct snd_soc_ops {
 };
 
 Please refer to the ALSA driver PCM documentation for details.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
+http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
 
 
 5 - DAPM description.
diff --git a/Documentation/sound/alsa/soc/platform.txt b/Documentation/sound/alsa/soc/platform.txt
index b681d17fc388..06d835987c6a 100644
--- a/Documentation/sound/alsa/soc/platform.txt
+++ b/Documentation/sound/alsa/soc/platform.txt
@@ -39,7 +39,7 @@ struct snd_soc_platform {
 };
 
 Please refer to the ALSA driver documentation for details of audio DMA.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
+http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
 
 An example DMA driver is soc/pxa/pxa2xx-pcm.c
 
diff --git a/Documentation/sound/oss/README.OSS b/Documentation/sound/oss/README.OSS
index fd42b05b2f55..c615debbf08d 100644
--- a/Documentation/sound/oss/README.OSS
+++ b/Documentation/sound/oss/README.OSS
@@ -36,7 +36,7 @@ with OSS API.
 
 Packages "snd-util-3.8.tar.gz" and "snd-data-0.1.tar.Z"
 contain useful utilities to be used with this driver.
-See http://www.opensound.com/ossfree/getting.html for
+See http://www.opensound.com/ossfree/ for
 download instructions.
 
 If you are looking for the installation instructions, please
@@ -1438,7 +1438,7 @@ of this driver (see http://www.4Front-tech.com/oss.html for more info).
 There are some common audio chipsets that are not supported yet. For example
 Sierra Aria and IBM Mwave. It's possible that these architectures
 get some support in future but I can't make any promises. Just look
-at the home page (http://www.opensound.com/ossfree/new_cards.html)
+at the home page (http://www.opensound.com/ossfree/)
 for latest info.
 
 Information about unsupported sound cards and chipsets is welcome as well
@@ -1449,7 +1449,6 @@ If you have any corrections and/or comments, please contact me.
 Hannu Savolainen
 hannu@opensound.com
 
-Personal home page:	   http://www.compusonic.fi/~hannu
 home page of OSS/Free: http://www.opensound.com/ossfree
 
 home page of commercial OSS
diff --git a/Documentation/sound/oss/oss-parameters.txt b/Documentation/sound/oss/oss-parameters.txt
new file mode 100644
index 000000000000..3ab391e7c295
--- /dev/null
+++ b/Documentation/sound/oss/oss-parameters.txt
@@ -0,0 +1,51 @@
+                          OSS Kernel Parameters
+                          ~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+	ad1848=		[HW,OSS]
+			Format: <io>,<irq>,<dma>,<dma2>,<type>
+
+	aedsp16=	[HW,OSS] Audio Excel DSP 16
+			Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
+			See also header of sound/oss/aedsp16.c.
+
+	dmasound=	[HW,OSS] Sound subsystem buffers
+
+	mpu401=		[HW,OSS]
+			Format: <io>,<irq>
+
+	opl3=		[HW,OSS]
+			Format: <io>
+
+	pas2=		[HW,OSS] Format:
+			<io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
+
+	pss=		[HW,OSS] Personal Sound System (ECHO ESC614)
+			Format:
+			<io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
+
+	sscape=		[HW,OSS]
+			Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
+
+	trix=		[HW,OSS] MediaTrix AudioTrix Pro
+			Format:
+			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
+
+	uart401=	[HW,OSS]
+			Format: <io>,<irq>
+
+	uart6850=	[HW,OSS]
+			Format: <io>,<irq>
+
+	waveartist=	[HW,OSS]
+			Format: <io>,<irq>,<dma>,<dma2>
diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt
index 9b659c79a547..4909d4116356 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/sparse.txt
@@ -1,5 +1,5 @@
 Copyright 2004 Linus Torvalds
-Copyright 2004 Pavel Machek <pavel@suse.cz>
+Copyright 2004 Pavel Machek <pavel@ucw.cz>
 Copyright 2006 Bob Copeland <me@bobcopeland.com>
 
 Using sparse for typechecking
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 5fdbb612aeb8..30289fab86eb 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -80,8 +80,10 @@ dirty_background_bytes
 Contains the amount of dirty memory at which the pdflush background writeback
 daemon will start writeback.
 
-If dirty_background_bytes is written, dirty_background_ratio becomes a function
-of its value (dirty_background_bytes / the amount of dirtyable system memory).
+Note: dirty_background_bytes is the counterpart of dirty_background_ratio. Only
+one of them may be specified at a time. When one sysctl is written it is
+immediately taken into account to evaluate the dirty memory limits and the
+other appears as 0 when read.
 
 ==============================================================
 
@@ -97,8 +99,10 @@ dirty_bytes
 Contains the amount of dirty memory at which a process generating disk writes
 will itself start writeback.
 
-If dirty_bytes is written, dirty_ratio becomes a function of its value
-(dirty_bytes / the amount of dirtyable system memory).
+Note: dirty_bytes is the counterpart of dirty_ratio. Only one of them may be
+specified at a time. When one sysctl is written it is immediately taken into
+account to evaluate the dirty memory limits and the other appears as 0 when
+read.
 
 Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
 value lower than this limit will be ignored and the old configuration will be
@@ -196,7 +200,7 @@ controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
 
 legacy_va_layout
 
-If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
+If non-zero, this sysctl disables the new 32-bit mmap layout - the kernel
 will use the legacy (2.4) layout for all processes.
 
 ==============================================================
@@ -511,7 +515,7 @@ information may not be desired.
 If this is set to non-zero, this information is shown whenever the
 OOM killer actually kills a memory-hogging task.
 
-The default value is 0.
+The default value is 1 (enabled).
 
 ==============================================================
 
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index 5c17196c8fe9..312e3754e8c5 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -75,7 +75,7 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 
 'f'	- Will call oom_kill to kill a memory hog process.
 
-'g'	- Used by kgdb on ppc and sh platforms.
+'g'	- Used by kgdb (kernel debugger)
 
 'h'     - Will display help (actually any other key than those listed
           here will display help. but 'h' is easy to remember :-)
@@ -110,12 +110,15 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 
 'u'     - Will attempt to remount all mounted filesystems read-only.
 
-'v'	- Dumps Voyager SMP processor info to your console.
+'v'	- Forcefully restores framebuffer console
+'v'	- Causes ETM buffer dump [ARM-specific]
 
 'w'	- Dumps tasks that are in uninterruptable (blocked) state.
 
 'x'	- Used by xmon interface on ppc/powerpc platforms.
 
+'y'	- Show global CPU Registers [SPARC-64 specific]
+
 'z'	- Dump the ftrace buffer
 
 '0'-'9' - Sets the console log level, controlling which kernel messages
diff --git a/Documentation/telephony/ixj.txt b/Documentation/telephony/ixj.txt
index 44d124005bad..4fb314d51702 100644
--- a/Documentation/telephony/ixj.txt
+++ b/Documentation/telephony/ixj.txt
@@ -108,14 +108,9 @@ applications.
 
 1.4  Where to get things
 
-You can download the latest versions of the driver from:
-
-http://www.quicknet.net/develop.htm
-
-You can download the latest version of this document from:
-
-http://www.quicknet.net/develop.htm
+Info on latest versions of the driver are here:
 
+http://web.archive.org/web/*/http://www.quicknet.net/develop.htm
 
 1.5  Mailing List
 
diff --git a/Documentation/timers/hpet_example.c b/Documentation/timers/hpet_example.c
index 4bfafb7bc4c5..9a3e7012c190 100644
--- a/Documentation/timers/hpet_example.c
+++ b/Documentation/timers/hpet_example.c
@@ -97,6 +97,33 @@ hpet_open_close(int argc, const char **argv)
 void
 hpet_info(int argc, const char **argv)
 {
+	struct hpet_info	info;
+	int			fd;
+
+	if (argc != 1) {
+		fprintf(stderr, "hpet_info: device-name\n");
+		return;
+	}
+
+	fd = open(argv[0], O_RDONLY);
+	if (fd < 0) {
+		fprintf(stderr, "hpet_info: open of %s failed\n", argv[0]);
+		return;
+	}
+
+	if (ioctl(fd, HPET_INFO, &info) < 0) {
+		fprintf(stderr, "hpet_info: failed to get info\n");
+		goto out;
+	}
+
+	fprintf(stderr, "hpet_info: hi_irqfreq 0x%lx hi_flags 0x%lx ",
+		info.hi_ireqfreq, info.hi_flags);
+	fprintf(stderr, "hi_hpet %d hi_timer %d\n",
+		info.hi_hpet, info.hi_timer);
+
+out:
+	close(fd);
+	return;
 }
 
 void
diff --git a/Documentation/timers/timers-howto.txt b/Documentation/timers/timers-howto.txt
new file mode 100644
index 000000000000..c9ef29d2ede3
--- /dev/null
+++ b/Documentation/timers/timers-howto.txt
@@ -0,0 +1,105 @@
+delays - Information on the various kernel delay / sleep mechanisms
+-------------------------------------------------------------------
+
+This document seeks to answer the common question: "What is the
+RightWay (TM) to insert a delay?"
+
+This question is most often faced by driver writers who have to
+deal with hardware delays and who may not be the most intimately
+familiar with the inner workings of the Linux Kernel.
+
+
+Inserting Delays
+----------------
+
+The first, and most important, question you need to ask is "Is my
+code in an atomic context?"  This should be followed closely by "Does
+it really need to delay in atomic context?" If so...
+
+ATOMIC CONTEXT:
+	You must use the *delay family of functions. These
+	functions use the jiffie estimation of clock speed
+	and will busy wait for enough loop cycles to achieve
+	the desired delay:
+
+	ndelay(unsigned long nsecs)
+	udelay(unsigned long usecs)
+	mdelay(unsgined long msecs)
+
+	udelay is the generally preferred API; ndelay-level
+	precision may not actually exist on many non-PC devices.
+
+	mdelay is macro wrapper around udelay, to account for
+	possible overflow when passing large arguments to udelay.
+	In general, use of mdelay is discouraged and code should
+	be refactored to allow for the use of msleep.
+
+NON-ATOMIC CONTEXT:
+	You should use the *sleep[_range] family of functions.
+	There are a few more options here, while any of them may
+	work correctly, using the "right" sleep function will
+	help the scheduler, power management, and just make your
+	driver better :)
+
+	-- Backed by busy-wait loop:
+		udelay(unsigned long usecs)
+	-- Backed by hrtimers:
+		usleep_range(unsigned long min, unsigned long max)
+	-- Backed by jiffies / legacy_timers
+		msleep(unsigned long msecs)
+		msleep_interruptible(unsigned long msecs)
+
+	Unlike the *delay family, the underlying mechanism
+	driving each of these calls varies, thus there are
+	quirks you should be aware of.
+
+
+	SLEEPING FOR "A FEW" USECS ( < ~10us? ):
+		* Use udelay
+
+		- Why not usleep?
+			On slower systems, (embedded, OR perhaps a speed-
+			stepped PC!) the overhead of setting up the hrtimers
+			for usleep *may* not be worth it. Such an evaluation
+			will obviously depend on your specific situation, but
+			it is something to be aware of.
+
+	SLEEPING FOR ~USECS OR SMALL MSECS ( 10us - 20ms):
+		* Use usleep_range
+
+		- Why not msleep for (1ms - 20ms)?
+			Explained originally here:
+				http://lkml.org/lkml/2007/8/3/250
+			msleep(1~20) may not do what the caller intends, and
+			will often sleep longer (~20 ms actual sleep for any
+			value given in the 1~20ms range). In many cases this
+			is not the desired behavior.
+
+		- Why is there no "usleep" / What is a good range?
+			Since usleep_range is built on top of hrtimers, the
+			wakeup will be very precise (ish), thus a simple
+			usleep function would likely introduce a large number
+			of undesired interrupts.
+
+			With the introduction of a range, the scheduler is
+			free to coalesce your wakeup with any other wakeup
+			that may have happened for other reasons, or at the
+			worst case, fire an interrupt for your upper bound.
+
+			The larger a range you supply, the greater a chance
+			that you will not trigger an interrupt; this should
+			be balanced with what is an acceptable upper bound on
+			delay / performance for your specific code path. Exact
+			tolerances here are very situation specific, thus it
+			is left to the caller to determine a reasonable range.
+
+	SLEEPING FOR LARGER MSECS ( 10ms+ )
+		* Use msleep or possibly msleep_interruptible
+
+		- What's the difference?
+			msleep sets the current task to TASK_UNINTERRUPTIBLE
+			whereas msleep_interruptible sets the current task to
+			TASK_INTERRUPTIBLE before scheduling the sleep. In
+			short, the difference is whether the sleep can be ended
+			early by a signal. In general, just use msleep unless
+			you know you have a need for the interruptible variant.
diff --git a/Documentation/tomoyo.txt b/Documentation/tomoyo.txt
index b3a232cae7f8..200a2d37cbc8 100644
--- a/Documentation/tomoyo.txt
+++ b/Documentation/tomoyo.txt
@@ -3,8 +3,8 @@
 TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel.
 
 LiveCD-based tutorials are available at
-http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/
-http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ .
+http://tomoyo.sourceforge.jp/1.7/1st-step/ubuntu10.04-live/
+http://tomoyo.sourceforge.jp/1.7/1st-step/centos5-live/ .
 Though these tutorials use non-LSM version of TOMOYO, they are useful for you
 to know what TOMOYO is.
 
@@ -13,12 +13,12 @@ to know what TOMOYO is.
 Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on
 kernel's command line.
 
-Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details.
+Please see http://tomoyo.sourceforge.jp/2.3/ for details.
 
 --- Where is documentation? ---
 
 User <-> Kernel interface documentation is available at
-http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html .
+http://tomoyo.sourceforge.jp/2.3/policy-reference.html .
 
 Materials we prepared for seminars and symposiums are available at
 http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
@@ -50,6 +50,6 @@ multiple LSM modules at the same time. We feel sorry that you have to give up
 SELinux/SMACK/AppArmor etc. when you want to use TOMOYO.
 
 We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM
-version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ .
+version of TOMOYO, available at http://tomoyo.sourceforge.jp/1.7/ .
 LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning
 to port non-LSM version's functionalities to LSM versions.
diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt
index f1f81afee8a0..dc52bd442c92 100644
--- a/Documentation/trace/ftrace-design.txt
+++ b/Documentation/trace/ftrace-design.txt
@@ -13,6 +13,9 @@ Note that this focuses on architecture implementation details only.  If you
 want more explanation of a feature in terms of common code, review the common
 ftrace.txt file.
 
+Ideally, everyone who wishes to retain performance while supporting tracing in
+their kernel should make it all the way to dynamic ftrace support.
+
 
 Prerequisites
 -------------
@@ -215,7 +218,7 @@ An arch may pass in a unique value (frame pointer) to both the entering and
 exiting of a function.  On exit, the value is compared and if it does not
 match, then it will panic the kernel.  This is largely a sanity check for bad
 code generation with gcc.  If gcc for your port sanely updates the frame
-pointer under different opitmization levels, then ignore this option.
+pointer under different optimization levels, then ignore this option.
 
 However, adding support for it isn't terribly difficult.  In your assembly code
 that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument.
@@ -234,7 +237,7 @@ If you can't trace NMI functions, then skip this option.
 
 
 HAVE_SYSCALL_TRACEPOINTS
----------------------
+------------------------
 
 You need very few things to get the syscalls tracing in an arch.
 
@@ -250,12 +253,152 @@ You need very few things to get the syscalls tracing in an arch.
 HAVE_FTRACE_MCOUNT_RECORD
 -------------------------
 
-See scripts/recordmcount.pl for more info.
+See scripts/recordmcount.pl for more info.  Just fill in the arch-specific
+details for how to locate the addresses of mcount call sites via objdump.
+This option doesn't make much sense without also implementing dynamic ftrace.
 
+
+HAVE_DYNAMIC_FTRACE
+-------------------
+
+You will first need HAVE_FTRACE_MCOUNT_RECORD and HAVE_FUNCTION_TRACER, so
+scroll your reader back up if you got over eager.
+
+Once those are out of the way, you will need to implement:
+	- asm/ftrace.h:
+		- MCOUNT_ADDR
+		- ftrace_call_adjust()
+		- struct dyn_arch_ftrace{}
+	- asm code:
+		- mcount() (new stub)
+		- ftrace_caller()
+		- ftrace_call()
+		- ftrace_stub()
+	- C code:
+		- ftrace_dyn_arch_init()
+		- ftrace_make_nop()
+		- ftrace_make_call()
+		- ftrace_update_ftrace_func()
+
+First you will need to fill out some arch details in your asm/ftrace.h.
+
+Define MCOUNT_ADDR as the address of your mcount symbol similar to:
+	#define MCOUNT_ADDR ((unsigned long)mcount)
+Since no one else will have a decl for that function, you will need to:
+	extern void mcount(void);
+
+You will also need the helper function ftrace_call_adjust().  Most people
+will be able to stub it out like so:
+	static inline unsigned long ftrace_call_adjust(unsigned long addr)
+	{
+		return addr;
+	}
 <details to be filled>
 
+Lastly you will need the custom dyn_arch_ftrace structure.  If you need
+some extra state when runtime patching arbitrary call sites, this is the
+place.  For now though, create an empty struct:
+	struct dyn_arch_ftrace {
+		/* No extra data needed */
+	};
+
+With the header out of the way, we can fill out the assembly code.  While we
+did already create a mcount() function earlier, dynamic ftrace only wants a
+stub function.  This is because the mcount() will only be used during boot
+and then all references to it will be patched out never to return.  Instead,
+the guts of the old mcount() will be used to create a new ftrace_caller()
+function.  Because the two are hard to merge, it will most likely be a lot
+easier to have two separate definitions split up by #ifdefs.  Same goes for
+the ftrace_stub() as that will now be inlined in ftrace_caller().
+
+Before we get confused anymore, let's check out some pseudo code so you can
+implement your own stuff in assembly:
 
-HAVE_DYNAMIC_FTRACE
----------------------
+void mcount(void)
+{
+	return;
+}
+
+void ftrace_caller(void)
+{
+	/* implement HAVE_FUNCTION_TRACE_MCOUNT_TEST if you desire */
+
+	/* save all state needed by the ABI (see paragraph above) */
+
+	unsigned long frompc = ...;
+	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
+
+ftrace_call:
+	ftrace_stub(frompc, selfpc);
+
+	/* restore all state needed by the ABI */
+
+ftrace_stub:
+	return;
+}
+
+This might look a little odd at first, but keep in mind that we will be runtime
+patching multiple things.  First, only functions that we actually want to trace
+will be patched to call ftrace_caller().  Second, since we only have one tracer
+active at a time, we will patch the ftrace_caller() function itself to call the
+specific tracer in question.  That is the point of the ftrace_call label.
+
+With that in mind, let's move on to the C code that will actually be doing the
+runtime patching.  You'll need a little knowledge of your arch's opcodes in
+order to make it through the next section.
+
+Every arch has an init callback function.  If you need to do something early on
+to initialize some state, this is the time to do that.  Otherwise, this simple
+function below should be sufficient for most people:
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	/* return value is done indirectly via data */
+	*(unsigned long *)data = 0;
+
+	return 0;
+}
+
+There are two functions that are used to do runtime patching of arbitrary
+functions.  The first is used to turn the mcount call site into a nop (which
+is what helps us retain runtime performance when not tracing).  The second is
+used to turn the mcount call site into a call to an arbitrary location (but
+typically that is ftracer_caller()).  See the general function definition in
+linux/ftrace.h for the functions:
+	ftrace_make_nop()
+	ftrace_make_call()
+The rec->ip value is the address of the mcount call site that was collected
+by the scripts/recordmcount.pl during build time.
+
+The last function is used to do runtime patching of the active tracer.  This
+will be modifying the assembly code at the location of the ftrace_call symbol
+inside of the ftrace_caller() function.  So you should have sufficient padding
+at that location to support the new function calls you'll be inserting.  Some
+people will be using a "call" type instruction while others will be using a
+"branch" type instruction.  Specifically, the function is:
+	ftrace_update_ftrace_func()
+
+
+HAVE_DYNAMIC_FTRACE + HAVE_FUNCTION_GRAPH_TRACER
+------------------------------------------------
+
+The function grapher needs a few tweaks in order to work with dynamic ftrace.
+Basically, you will need to:
+	- update:
+		- ftrace_caller()
+		- ftrace_graph_call()
+		- ftrace_graph_caller()
+	- implement:
+		- ftrace_enable_ftrace_graph_caller()
+		- ftrace_disable_ftrace_graph_caller()
 
 <details to be filled>
+Quick notes:
+	- add a nop stub after the ftrace_call location named ftrace_graph_call;
+	  stub needs to be large enough to support a call to ftrace_graph_caller()
+	- update ftrace_graph_caller() to work with being called by the new
+	  ftrace_caller() since some semantics may have changed
+	- ftrace_enable_ftrace_graph_caller() will runtime patch the
+	  ftrace_graph_call location with a call to ftrace_graph_caller()
+	- ftrace_disable_ftrace_graph_caller() will runtime patch the
+	  ftrace_graph_call location with nops
diff --git a/Documentation/trace/kmemtrace.txt b/Documentation/trace/kmemtrace.txt
deleted file mode 100644
index 6308735e58ca..000000000000
--- a/Documentation/trace/kmemtrace.txt
+++ /dev/null
@@ -1,126 +0,0 @@
-			kmemtrace - Kernel Memory Tracer
-
-			  by Eduard - Gabriel Munteanu
-			     <eduard.munteanu@linux360.ro>
-
-I. Introduction
-===============
-
-kmemtrace helps kernel developers figure out two things:
-1) how different allocators (SLAB, SLUB etc.) perform
-2) how kernel code allocates memory and how much
-
-To do this, we trace every allocation and export information to the userspace
-through the relay interface. We export things such as the number of requested
-bytes, the number of bytes actually allocated (i.e. including internal
-fragmentation), whether this is a slab allocation or a plain kmalloc() and so
-on.
-
-The actual analysis is performed by a userspace tool (see section III for
-details on where to get it from). It logs the data exported by the kernel,
-processes it and (as of writing this) can provide the following information:
-- the total amount of memory allocated and fragmentation per call-site
-- the amount of memory allocated and fragmentation per allocation
-- total memory allocated and fragmentation in the collected dataset
-- number of cross-CPU allocation and frees (makes sense in NUMA environments)
-
-Moreover, it can potentially find inconsistent and erroneous behavior in
-kernel code, such as using slab free functions on kmalloc'ed memory or
-allocating less memory than requested (but not truly failed allocations).
-
-kmemtrace also makes provisions for tracing on some arch and analysing the
-data on another.
-
-II. Design and goals
-====================
-
-kmemtrace was designed to handle rather large amounts of data. Thus, it uses
-the relay interface to export whatever is logged to userspace, which then
-stores it. Analysis and reporting is done asynchronously, that is, after the
-data is collected and stored. By design, it allows one to log and analyse
-on different machines and different arches.
-
-As of writing this, the ABI is not considered stable, though it might not
-change much. However, no guarantees are made about compatibility yet. When
-deemed stable, the ABI should still allow easy extension while maintaining
-backward compatibility. This is described further in Documentation/ABI.
-
-Summary of design goals:
-	- allow logging and analysis to be done across different machines
-	- be fast and anticipate usage in high-load environments (*)
-	- be reasonably extensible
-	- make it possible for GNU/Linux distributions to have kmemtrace
-	included in their repositories
-
-(*) - one of the reasons Pekka Enberg's original userspace data analysis
-    tool's code was rewritten from Perl to C (although this is more than a
-    simple conversion)
-
-
-III. Quick usage guide
-======================
-
-1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable
-CONFIG_KMEMTRACE).
-
-2) Get the userspace tool and build it:
-$ git clone git://repo.or.cz/kmemtrace-user.git		# current repository
-$ cd kmemtrace-user/
-$ ./autogen.sh
-$ ./configure
-$ make
-
-3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the
-'single' runlevel (so that relay buffers don't fill up easily), and run
-kmemtrace:
-# '$' does not mean user, but root here.
-$ mount -t debugfs none /sys/kernel/debug
-$ mount -t proc none /proc
-$ cd path/to/kmemtrace-user/
-$ ./kmemtraced
-Wait a bit, then stop it with CTRL+C.
-$ cat /sys/kernel/debug/kmemtrace/total_overruns	# Check if we didn't
-							# overrun, should
-							# be zero.
-$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to
-		check its correctness]
-$ ./kmemtrace-report
-
-Now you should have a nice and short summary of how the allocator performs.
-
-IV. FAQ and known issues
-========================
-
-Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix
-this? Should I worry?
-A: If it's non-zero, this affects kmemtrace's accuracy, depending on how
-large the number is. You can fix it by supplying a higher
-'kmemtrace.subbufs=N' kernel parameter.
----
-
-Q: kmemtrace_check reports errors, how do I fix this? Should I worry?
-A: This is a bug and should be reported. It can occur for a variety of
-reasons:
-	- possible bugs in relay code
-	- possible misuse of relay by kmemtrace
-	- timestamps being collected unorderly
-Or you may fix it yourself and send us a patch.
----
-
-Q: kmemtrace_report shows many errors, how do I fix this? Should I worry?
-A: This is a known issue and I'm working on it. These might be true errors
-in kernel code, which may have inconsistent behavior (e.g. allocating memory
-with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed
-out this behavior may work with SLAB, but may fail with other allocators.
-
-It may also be due to lack of tracing in some unusual allocator functions.
-
-We don't want bug reports regarding this issue yet.
----
-
-V. See also
-===========
-
-Documentation/kernel-parameters.txt
-Documentation/ABI/testing/debugfs-kmemtrace
-
diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt
index ec94748ae65b..5f77d94598dd 100644
--- a/Documentation/trace/kprobetrace.txt
+++ b/Documentation/trace/kprobetrace.txt
@@ -42,7 +42,7 @@ Synopsis of kprobe_events
   +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**)
   NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
   FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
-		  (u8/u16/u32/u64/s8/s16/s32/s64) are supported.
+		  (u8/u16/u32/u64/s8/s16/s32/s64) and string are supported.
 
   (*) only for return probe.
   (**) this is useful for fetching a field of data structures.
diff --git a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
new file mode 100644
index 000000000000..b3e73ddb1567
--- /dev/null
+++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -0,0 +1,705 @@
+#!/usr/bin/perl
+# This is a POC for reading the text representation of trace output related to
+# page reclaim. It makes an attempt to extract some high-level information on
+# what is going on. The accuracy of the parser may vary
+#
+# Example usage: trace-vmscan-postprocess.pl < /sys/kernel/debug/tracing/trace_pipe
+# other options
+#   --read-procstat	If the trace lacks process info, get it from /proc
+#   --ignore-pid	Aggregate processes of the same name together
+#
+# Copyright (c) IBM Corporation 2009
+# Author: Mel Gorman <mel@csn.ul.ie>
+use strict;
+use Getopt::Long;
+
+# Tracepoint events
+use constant MM_VMSCAN_DIRECT_RECLAIM_BEGIN	=> 1;
+use constant MM_VMSCAN_DIRECT_RECLAIM_END	=> 2;
+use constant MM_VMSCAN_KSWAPD_WAKE		=> 3;
+use constant MM_VMSCAN_KSWAPD_SLEEP		=> 4;
+use constant MM_VMSCAN_LRU_SHRINK_ACTIVE	=> 5;
+use constant MM_VMSCAN_LRU_SHRINK_INACTIVE	=> 6;
+use constant MM_VMSCAN_LRU_ISOLATE		=> 7;
+use constant MM_VMSCAN_WRITEPAGE_FILE_SYNC	=> 8;
+use constant MM_VMSCAN_WRITEPAGE_ANON_SYNC	=> 9;
+use constant MM_VMSCAN_WRITEPAGE_FILE_ASYNC	=> 10;
+use constant MM_VMSCAN_WRITEPAGE_ANON_ASYNC	=> 11;
+use constant MM_VMSCAN_WRITEPAGE_ASYNC		=> 12;
+use constant EVENT_UNKNOWN			=> 13;
+
+# Per-order events
+use constant MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER => 11;
+use constant MM_VMSCAN_WAKEUP_KSWAPD_PERORDER 	=> 12;
+use constant MM_VMSCAN_KSWAPD_WAKE_PERORDER	=> 13;
+use constant HIGH_KSWAPD_REWAKEUP_PERORDER	=> 14;
+
+# Constants used to track state
+use constant STATE_DIRECT_BEGIN 		=> 15;
+use constant STATE_DIRECT_ORDER 		=> 16;
+use constant STATE_KSWAPD_BEGIN			=> 17;
+use constant STATE_KSWAPD_ORDER			=> 18;
+
+# High-level events extrapolated from tracepoints
+use constant HIGH_DIRECT_RECLAIM_LATENCY	=> 19;
+use constant HIGH_KSWAPD_LATENCY		=> 20;
+use constant HIGH_KSWAPD_REWAKEUP		=> 21;
+use constant HIGH_NR_SCANNED			=> 22;
+use constant HIGH_NR_TAKEN			=> 23;
+use constant HIGH_NR_RECLAIMED			=> 24;
+use constant HIGH_NR_CONTIG_DIRTY		=> 25;
+
+my %perprocesspid;
+my %perprocess;
+my %last_procmap;
+my $opt_ignorepid;
+my $opt_read_procstat;
+
+my $total_wakeup_kswapd;
+my ($total_direct_reclaim, $total_direct_nr_scanned);
+my ($total_direct_latency, $total_kswapd_latency);
+my ($total_direct_nr_reclaimed);
+my ($total_direct_writepage_file_sync, $total_direct_writepage_file_async);
+my ($total_direct_writepage_anon_sync, $total_direct_writepage_anon_async);
+my ($total_kswapd_nr_scanned, $total_kswapd_wake);
+my ($total_kswapd_writepage_file_sync, $total_kswapd_writepage_file_async);
+my ($total_kswapd_writepage_anon_sync, $total_kswapd_writepage_anon_async);
+my ($total_kswapd_nr_reclaimed);
+
+# Catch sigint and exit on request
+my $sigint_report = 0;
+my $sigint_exit = 0;
+my $sigint_pending = 0;
+my $sigint_received = 0;
+sub sigint_handler {
+	my $current_time = time;
+	if ($current_time - 2 > $sigint_received) {
+		print "SIGINT received, report pending. Hit ctrl-c again to exit\n";
+		$sigint_report = 1;
+	} else {
+		if (!$sigint_exit) {
+			print "Second SIGINT received quickly, exiting\n";
+		}
+		$sigint_exit++;
+	}
+
+	if ($sigint_exit > 3) {
+		print "Many SIGINTs received, exiting now without report\n";
+		exit;
+	}
+
+	$sigint_received = $current_time;
+	$sigint_pending = 1;
+}
+$SIG{INT} = "sigint_handler";
+
+# Parse command line options
+GetOptions(
+	'ignore-pid'	 =>	\$opt_ignorepid,
+	'read-procstat'	 =>	\$opt_read_procstat,
+);
+
+# Defaults for dynamically discovered regex's
+my $regex_direct_begin_default = 'order=([0-9]*) may_writepage=([0-9]*) gfp_flags=([A-Z_|]*)';
+my $regex_direct_end_default = 'nr_reclaimed=([0-9]*)';
+my $regex_kswapd_wake_default = 'nid=([0-9]*) order=([0-9]*)';
+my $regex_kswapd_sleep_default = 'nid=([0-9]*)';
+my $regex_wakeup_kswapd_default = 'nid=([0-9]*) zid=([0-9]*) order=([0-9]*)';
+my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_taken=([0-9]*) contig_taken=([0-9]*) contig_dirty=([0-9]*) contig_failed=([0-9]*)';
+my $regex_lru_shrink_inactive_default = 'nid=([0-9]*) zid=([0-9]*) nr_scanned=([0-9]*) nr_reclaimed=([0-9]*) priority=([0-9]*) flags=([A-Z_|]*)';
+my $regex_lru_shrink_active_default = 'lru=([A-Z_]*) nr_scanned=([0-9]*) nr_rotated=([0-9]*) priority=([0-9]*)';
+my $regex_writepage_default = 'page=([0-9a-f]*) pfn=([0-9]*) flags=([A-Z_|]*)';
+
+# Dyanically discovered regex
+my $regex_direct_begin;
+my $regex_direct_end;
+my $regex_kswapd_wake;
+my $regex_kswapd_sleep;
+my $regex_wakeup_kswapd;
+my $regex_lru_isolate;
+my $regex_lru_shrink_inactive;
+my $regex_lru_shrink_active;
+my $regex_writepage;
+
+# Static regex used. Specified like this for readability and for use with /o
+#                      (process_pid)     (cpus      )   ( time  )   (tpoint    ) (details)
+my $regex_traceevent = '\s*([a-zA-Z0-9-]*)\s*(\[[0-9]*\])\s*([0-9.]*):\s*([a-zA-Z_]*):\s*(.*)';
+my $regex_statname = '[-0-9]*\s\((.*)\).*';
+my $regex_statppid = '[-0-9]*\s\(.*\)\s[A-Za-z]\s([0-9]*).*';
+
+sub generate_traceevent_regex {
+	my $event = shift;
+	my $default = shift;
+	my $regex;
+
+	# Read the event format or use the default
+	if (!open (FORMAT, "/sys/kernel/debug/tracing/events/$event/format")) {
+		print("WARNING: Event $event format string not found\n");
+		return $default;
+	} else {
+		my $line;
+		while (!eof(FORMAT)) {
+			$line = <FORMAT>;
+			$line =~ s/, REC->.*//;
+			if ($line =~ /^print fmt:\s"(.*)".*/) {
+				$regex = $1;
+				$regex =~ s/%s/\([0-9a-zA-Z|_]*\)/g;
+				$regex =~ s/%p/\([0-9a-f]*\)/g;
+				$regex =~ s/%d/\([-0-9]*\)/g;
+				$regex =~ s/%ld/\([-0-9]*\)/g;
+				$regex =~ s/%lu/\([0-9]*\)/g;
+			}
+		}
+	}
+
+	# Can't handle the print_flags stuff but in the context of this
+	# script, it really doesn't matter
+	$regex =~ s/\(REC.*\) \? __print_flags.*//;
+
+	# Verify fields are in the right order
+	my $tuple;
+	foreach $tuple (split /\s/, $regex) {
+		my ($key, $value) = split(/=/, $tuple);
+		my $expected = shift;
+		if ($key ne $expected) {
+			print("WARNING: Format not as expected for event $event '$key' != '$expected'\n");
+			$regex =~ s/$key=\((.*)\)/$key=$1/;
+		}
+	}
+
+	if (defined shift) {
+		die("Fewer fields than expected in format");
+	}
+
+	return $regex;
+}
+
+$regex_direct_begin = generate_traceevent_regex(
+			"vmscan/mm_vmscan_direct_reclaim_begin",
+			$regex_direct_begin_default,
+			"order", "may_writepage",
+			"gfp_flags");
+$regex_direct_end = generate_traceevent_regex(
+			"vmscan/mm_vmscan_direct_reclaim_end",
+			$regex_direct_end_default,
+			"nr_reclaimed");
+$regex_kswapd_wake = generate_traceevent_regex(
+			"vmscan/mm_vmscan_kswapd_wake",
+			$regex_kswapd_wake_default,
+			"nid", "order");
+$regex_kswapd_sleep = generate_traceevent_regex(
+			"vmscan/mm_vmscan_kswapd_sleep",
+			$regex_kswapd_sleep_default,
+			"nid");
+$regex_wakeup_kswapd = generate_traceevent_regex(
+			"vmscan/mm_vmscan_wakeup_kswapd",
+			$regex_wakeup_kswapd_default,
+			"nid", "zid", "order");
+$regex_lru_isolate = generate_traceevent_regex(
+			"vmscan/mm_vmscan_lru_isolate",
+			$regex_lru_isolate_default,
+			"isolate_mode", "order",
+			"nr_requested", "nr_scanned", "nr_taken",
+			"contig_taken", "contig_dirty", "contig_failed");
+$regex_lru_shrink_inactive = generate_traceevent_regex(
+			"vmscan/mm_vmscan_lru_shrink_inactive",
+			$regex_lru_shrink_inactive_default,
+			"nid", "zid",
+			"nr_scanned", "nr_reclaimed", "priority",
+			"flags");
+$regex_lru_shrink_active = generate_traceevent_regex(
+			"vmscan/mm_vmscan_lru_shrink_active",
+			$regex_lru_shrink_active_default,
+			"nid", "zid",
+			"lru",
+			"nr_scanned", "nr_rotated", "priority");
+$regex_writepage = generate_traceevent_regex(
+			"vmscan/mm_vmscan_writepage",
+			$regex_writepage_default,
+			"page", "pfn", "flags");
+
+sub read_statline($) {
+	my $pid = $_[0];
+	my $statline;
+
+	if (open(STAT, "/proc/$pid/stat")) {
+		$statline = <STAT>;
+		close(STAT);
+	}
+
+	if ($statline eq '') {
+		$statline = "-1 (UNKNOWN_PROCESS_NAME) R 0";
+	}
+
+	return $statline;
+}
+
+sub guess_process_pid($$) {
+	my $pid = $_[0];
+	my $statline = $_[1];
+
+	if ($pid == 0) {
+		return "swapper-0";
+	}
+
+	if ($statline !~ /$regex_statname/o) {
+		die("Failed to math stat line for process name :: $statline");
+	}
+	return "$1-$pid";
+}
+
+# Convert sec.usec timestamp format
+sub timestamp_to_ms($) {
+	my $timestamp = $_[0];
+
+	my ($sec, $usec) = split (/\./, $timestamp);
+	return ($sec * 1000) + ($usec / 1000);
+}
+
+sub process_events {
+	my $traceevent;
+	my $process_pid;
+	my $cpus;
+	my $timestamp;
+	my $tracepoint;
+	my $details;
+	my $statline;
+
+	# Read each line of the event log
+EVENT_PROCESS:
+	while ($traceevent = <STDIN>) {
+		if ($traceevent =~ /$regex_traceevent/o) {
+			$process_pid = $1;
+			$timestamp = $3;
+			$tracepoint = $4;
+
+			$process_pid =~ /(.*)-([0-9]*)$/;
+			my $process = $1;
+			my $pid = $2;
+
+			if ($process eq "") {
+				$process = $last_procmap{$pid};
+				$process_pid = "$process-$pid";
+			}
+			$last_procmap{$pid} = $process;
+
+			if ($opt_read_procstat) {
+				$statline = read_statline($pid);
+				if ($opt_read_procstat && $process eq '') {
+					$process_pid = guess_process_pid($pid, $statline);
+				}
+			}
+		} else {
+			next;
+		}
+
+		# Perl Switch() sucks majorly
+		if ($tracepoint eq "mm_vmscan_direct_reclaim_begin") {
+			$timestamp = timestamp_to_ms($timestamp);
+			$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}++;
+			$perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN} = $timestamp;
+
+			$details = $5;
+			if ($details !~ /$regex_direct_begin/o) {
+				print "WARNING: Failed to parse mm_vmscan_direct_reclaim_begin as expected\n";
+				print "         $details\n";
+				print "         $regex_direct_begin\n";
+				next;
+			}
+			my $order = $1;
+			$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order]++;
+			$perprocesspid{$process_pid}->{STATE_DIRECT_ORDER} = $order;
+		} elsif ($tracepoint eq "mm_vmscan_direct_reclaim_end") {
+			# Count the event itself
+			my $index = $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_END};
+			$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_END}++;
+
+			# Record how long direct reclaim took this time
+			if (defined $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN}) {
+				$timestamp = timestamp_to_ms($timestamp);
+				my $order = $perprocesspid{$process_pid}->{STATE_DIRECT_ORDER};
+				my $latency = ($timestamp - $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN});
+				$perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index] = "$order-$latency";
+			}
+		} elsif ($tracepoint eq "mm_vmscan_kswapd_wake") {
+			$details = $5;
+			if ($details !~ /$regex_kswapd_wake/o) {
+				print "WARNING: Failed to parse mm_vmscan_kswapd_wake as expected\n";
+				print "         $details\n";
+				print "         $regex_kswapd_wake\n";
+				next;
+			}
+
+			my $order = $2;
+			$perprocesspid{$process_pid}->{STATE_KSWAPD_ORDER} = $order;
+			if (!$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN}) {
+				$timestamp = timestamp_to_ms($timestamp);
+				$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}++;
+				$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN} = $timestamp;
+				$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order]++;
+			} else {
+				$perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP}++;
+				$perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP_PERORDER}[$order]++;
+			}
+		} elsif ($tracepoint eq "mm_vmscan_kswapd_sleep") {
+
+			# Count the event itself
+			my $index = $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_SLEEP};
+			$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_SLEEP}++;
+
+			# Record how long kswapd was awake
+			$timestamp = timestamp_to_ms($timestamp);
+			my $order = $perprocesspid{$process_pid}->{STATE_KSWAPD_ORDER};
+			my $latency = ($timestamp - $perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN});
+			$perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index] = "$order-$latency";
+			$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN} = 0;
+		} elsif ($tracepoint eq "mm_vmscan_wakeup_kswapd") {
+			$perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}++;
+
+			$details = $5;
+			if ($details !~ /$regex_wakeup_kswapd/o) {
+				print "WARNING: Failed to parse mm_vmscan_wakeup_kswapd as expected\n";
+				print "         $details\n";
+				print "         $regex_wakeup_kswapd\n";
+				next;
+			}
+			my $order = $3;
+			$perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order]++;
+		} elsif ($tracepoint eq "mm_vmscan_lru_isolate") {
+			$details = $5;
+			if ($details !~ /$regex_lru_isolate/o) {
+				print "WARNING: Failed to parse mm_vmscan_lru_isolate as expected\n";
+				print "         $details\n";
+				print "         $regex_lru_isolate/o\n";
+				next;
+			}
+			my $nr_scanned = $4;
+			my $nr_contig_dirty = $7;
+			$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
+			$perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
+		} elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") {
+			$details = $5;
+			if ($details !~ /$regex_lru_shrink_inactive/o) {
+				print "WARNING: Failed to parse mm_vmscan_lru_shrink_inactive as expected\n";
+				print "         $details\n";
+				print "         $regex_lru_shrink_inactive/o\n";
+				next;
+			}
+			my $nr_reclaimed = $4;
+			$perprocesspid{$process_pid}->{HIGH_NR_RECLAIMED} += $nr_reclaimed;
+		} elsif ($tracepoint eq "mm_vmscan_writepage") {
+			$details = $5;
+			if ($details !~ /$regex_writepage/o) {
+				print "WARNING: Failed to parse mm_vmscan_writepage as expected\n";
+				print "         $details\n";
+				print "         $regex_writepage\n";
+				next;
+			}
+
+			my $flags = $3;
+			my $file = 0;
+			my $sync_io = 0;
+			if ($flags =~ /RECLAIM_WB_FILE/) {
+				$file = 1;
+			}
+			if ($flags =~ /RECLAIM_WB_SYNC/) {
+				$sync_io = 1;
+			}
+			if ($sync_io) {
+				if ($file) {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC}++;
+				} else {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC}++;
+				}
+			} else {
+				if ($file) {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC}++;
+				} else {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC}++;
+				}
+			}
+		} else {
+			$perprocesspid{$process_pid}->{EVENT_UNKNOWN}++;
+		}
+
+		if ($sigint_pending) {
+			last EVENT_PROCESS;
+		}
+	}
+}
+
+sub dump_stats {
+	my $hashref = shift;
+	my %stats = %$hashref;
+
+	# Dump per-process stats
+	my $process_pid;
+	my $max_strlen = 0;
+
+	# Get the maximum process name
+	foreach $process_pid (keys %perprocesspid) {
+		my $len = length($process_pid);
+		if ($len > $max_strlen) {
+			$max_strlen = $len;
+		}
+	}
+	$max_strlen += 2;
+
+	# Work out latencies
+	printf("\n") if !$opt_ignorepid;
+	printf("Reclaim latencies expressed as order-latency_in_ms\n") if !$opt_ignorepid;
+	foreach $process_pid (keys %stats) {
+
+		if (!$stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[0] &&
+				!$stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[0]) {
+			next;
+		}
+
+		printf "%-" . $max_strlen . "s ", $process_pid if !$opt_ignorepid;
+		my $index = 0;
+		while (defined $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index] ||
+			defined $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]) {
+
+			if ($stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) {
+				printf("%s ", $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) if !$opt_ignorepid;
+				my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]);
+				$total_direct_latency += $latency;
+			} else {
+				printf("%s ", $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]) if !$opt_ignorepid;
+				my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]);
+				$total_kswapd_latency += $latency;
+			}
+			$index++;
+		}
+		print "\n" if !$opt_ignorepid;
+	}
+
+	# Print out process activity
+	printf("\n");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s %8s  %8s %8s %8s %8s\n", "Process", "Direct",  "Wokeup", "Pages",   "Pages",   "Pages",   "Pages",     "Time");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s %8s  %8s %8s %8s %8s\n", "details", "Rclms",   "Kswapd", "Scanned", "Rclmed",  "Sync-IO", "ASync-IO",  "Stalled");
+	foreach $process_pid (keys %stats) {
+
+		if (!$stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}) {
+			next;
+		}
+
+		$total_direct_reclaim += $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN};
+		$total_wakeup_kswapd += $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD};
+		$total_direct_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED};
+		$total_direct_nr_reclaimed += $stats{$process_pid}->{HIGH_NR_RECLAIMED};
+		$total_direct_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+		$total_direct_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+		$total_direct_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+
+		$total_direct_writepage_anon_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+		my $index = 0;
+		my $this_reclaim_delay = 0;
+		while (defined $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) {
+			 my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]);
+			$this_reclaim_delay += $latency;
+			$index++;
+		}
+
+		printf("%-" . $max_strlen . "s %8d %10d   %8u %8u  %8u %8u %8.3f",
+			$process_pid,
+			$stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN},
+			$stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD},
+			$stats{$process_pid}->{HIGH_NR_SCANNED},
+			$stats{$process_pid}->{HIGH_NR_RECLAIMED},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC},
+			$this_reclaim_delay / 1000);
+
+		if ($stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order];
+				if ($count != 0) {
+					print "direct-$order=$count ";
+				}
+			}
+		}
+		if ($stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order];
+				if ($count != 0) {
+					print "wakeup-$order=$count ";
+				}
+			}
+		}
+		if ($stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY}) {
+			print "      ";
+			my $count = $stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY};
+			if ($count != 0) {
+				print "contig-dirty=$count ";
+			}
+		}
+
+		print "\n";
+	}
+
+	# Print out kswapd activity
+	printf("\n");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s   %8s %8s %8s\n", "Kswapd",   "Kswapd",  "Order",     "Pages",   "Pages",   "Pages",  "Pages");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s   %8s %8s %8s\n", "Instance", "Wakeups", "Re-wakeup", "Scanned", "Rclmed",  "Sync-IO", "ASync-IO");
+	foreach $process_pid (keys %stats) {
+
+		if (!$stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}) {
+			next;
+		}
+
+		$total_kswapd_wake += $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE};
+		$total_kswapd_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED};
+		$total_kswapd_nr_reclaimed += $stats{$process_pid}->{HIGH_NR_RECLAIMED};
+		$total_kswapd_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+		$total_kswapd_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+		$total_kswapd_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+		$total_kswapd_writepage_anon_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+		printf("%-" . $max_strlen . "s %8d %10d   %8u %8u  %8i %8u",
+			$process_pid,
+			$stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE},
+			$stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP},
+			$stats{$process_pid}->{HIGH_NR_SCANNED},
+			$stats{$process_pid}->{HIGH_NR_RECLAIMED},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC});
+
+		if ($stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order];
+				if ($count != 0) {
+					print "wake-$order=$count ";
+				}
+			}
+		}
+		if ($stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP_PERORDER}[$order];
+				if ($count != 0) {
+					print "rewake-$order=$count ";
+				}
+			}
+		}
+		printf("\n");
+	}
+
+	# Print out summaries
+	$total_direct_latency /= 1000;
+	$total_kswapd_latency /= 1000;
+	print "\nSummary\n";
+	print "Direct reclaims:     			$total_direct_reclaim\n";
+	print "Direct reclaim pages scanned:		$total_direct_nr_scanned\n";
+	print "Direct reclaim pages reclaimed:		$total_direct_nr_reclaimed\n";
+	print "Direct reclaim write file sync I/O:	$total_direct_writepage_file_sync\n";
+	print "Direct reclaim write anon sync I/O:	$total_direct_writepage_anon_sync\n";
+	print "Direct reclaim write file async I/O:	$total_direct_writepage_file_async\n";
+	print "Direct reclaim write anon async I/O:	$total_direct_writepage_anon_async\n";
+	print "Wake kswapd requests:			$total_wakeup_kswapd\n";
+	printf "Time stalled direct reclaim: 		%-1.2f seconds\n", $total_direct_latency;
+	print "\n";
+	print "Kswapd wakeups:				$total_kswapd_wake\n";
+	print "Kswapd pages scanned:			$total_kswapd_nr_scanned\n";
+	print "Kswapd pages reclaimed:			$total_kswapd_nr_reclaimed\n";
+	print "Kswapd reclaim write file sync I/O:	$total_kswapd_writepage_file_sync\n";
+	print "Kswapd reclaim write anon sync I/O:	$total_kswapd_writepage_anon_sync\n";
+	print "Kswapd reclaim write file async I/O:	$total_kswapd_writepage_file_async\n";
+	print "Kswapd reclaim write anon async I/O:	$total_kswapd_writepage_anon_async\n";
+	printf "Time kswapd awake:			%-1.2f seconds\n", $total_kswapd_latency;
+}
+
+sub aggregate_perprocesspid() {
+	my $process_pid;
+	my $process;
+	undef %perprocess;
+
+	foreach $process_pid (keys %perprocesspid) {
+		$process = $process_pid;
+		$process =~ s/-([0-9])*$//;
+		if ($process eq '') {
+			$process = "NO_PROCESS_NAME";
+		}
+
+		$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN} += $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN};
+		$perprocess{$process}->{MM_VMSCAN_KSWAPD_WAKE} += $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE};
+		$perprocess{$process}->{MM_VMSCAN_WAKEUP_KSWAPD} += $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD};
+		$perprocess{$process}->{HIGH_KSWAPD_REWAKEUP} += $perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP};
+		$perprocess{$process}->{HIGH_NR_SCANNED} += $perprocesspid{$process_pid}->{HIGH_NR_SCANNED};
+		$perprocess{$process}->{HIGH_NR_RECLAIMED} += $perprocesspid{$process_pid}->{HIGH_NR_RECLAIMED};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+		for (my $order = 0; $order < 20; $order++) {
+			$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order];
+			$perprocess{$process}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order];
+			$perprocess{$process}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order];
+
+		}
+
+		# Aggregate direct reclaim latencies
+		my $wr_index = $perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END};
+		my $rd_index = 0;
+		while (defined $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$rd_index]) {
+			$perprocess{$process}->{HIGH_DIRECT_RECLAIM_LATENCY}[$wr_index] = $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$rd_index];
+			$rd_index++;
+			$wr_index++;
+		}
+		$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END} = $wr_index;
+
+		# Aggregate kswapd latencies
+		my $wr_index = $perprocess{$process}->{MM_VMSCAN_KSWAPD_SLEEP};
+		my $rd_index = 0;
+		while (defined $perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$rd_index]) {
+			$perprocess{$process}->{HIGH_KSWAPD_LATENCY}[$wr_index] = $perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$rd_index];
+			$rd_index++;
+			$wr_index++;
+		}
+		$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END} = $wr_index;
+	}
+}
+
+sub report() {
+	if (!$opt_ignorepid) {
+		dump_stats(\%perprocesspid);
+	} else {
+		aggregate_perprocesspid();
+		dump_stats(\%perprocess);
+	}
+}
+
+# Process events or signals until neither is available
+sub signal_loop() {
+	my $sigint_processed;
+	do {
+		$sigint_processed = 0;
+		process_events();
+
+		# Handle pending signals if any
+		if ($sigint_pending) {
+			my $current_time = time;
+
+			if ($sigint_exit) {
+				print "Received exit signal\n";
+				$sigint_pending = 0;
+			}
+			if ($sigint_report) {
+				if ($current_time >= $sigint_received + 2) {
+					report();
+					$sigint_report = 0;
+					$sigint_pending = 0;
+					$sigint_processed = 1;
+				}
+			}
+		}
+	} while ($sigint_pending || $sigint_processed);
+}
+
+signal_loop();
+report();
diff --git a/Documentation/uml/UserModeLinux-HOWTO.txt b/Documentation/uml/UserModeLinux-HOWTO.txt
index 628013f944c4..9b7e1904db1c 100644
--- a/Documentation/uml/UserModeLinux-HOWTO.txt
+++ b/Documentation/uml/UserModeLinux-HOWTO.txt
@@ -8,62 +8,6 @@
 
   Table of Contents
 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
   1. Introduction
 
      1.1 How is User Mode Linux Different?
@@ -277,8 +221,7 @@
 
   1. Download the latest UML patch from
 
-     the download page <http://user-mode-linux.sourceforge.net/dl-
-     sf.html>
+     the download page <http://user-mode-linux.sourceforge.net/
 
      In this example, the file is uml-patch-2.4.0-prerelease.bz2.
 
@@ -438,7 +381,7 @@
   as modules, especially filesystems and network protocols and filters,
   so most symbols which need to be exported probably already are.
   However, if you do find symbols that need exporting, let  us
-  <http://user-mode-linux.sourceforge.net/contacts.html>  know, and
+  <http://user-mode-linux.sourceforge.net/>  know, and
   they'll be "taken care of".
 
 
@@ -498,8 +441,8 @@
 
   You will need a filesystem to boot UML from.  There are a number
   available for download from  here  <http://user-mode-
-  linux.sourceforge.net/dl-sf.html> .  There are also  several tools
-  <http://user-mode-linux.sourceforge.net/fs_making.html>  which can be
+  linux.sourceforge.net/> .  There are also  several tools
+  <http://user-mode-linux.sourceforge.net/>  which can be
   used to generate UML-compatible filesystem images from media.
   The kernel will boot up and present you with a login prompt.
 
@@ -1236,7 +1179,7 @@
 
 
   Harald's original README is here <http://user-mode-linux.source-
-  forge.net/text/mcast.txt>  and explains these in detail, as well as
+  forge.net/>  and explains these in detail, as well as
   some other issues.
 
 
@@ -1311,7 +1254,7 @@
   kernel.
 
   These were pointed out by Tim Robinson <timro at trkr dot net> in
-  <http://www.geocrawler.com/lists/3/SourceForge/597/0/> name="this uml-
+  <http://www.geocrawler.com/> name="this uml-
   user post"> .
 
 
@@ -2038,7 +1981,7 @@
 
   uml_moo is installed with the UML deb and RPM.  If you didn't install
   UML from one of those packages, you can also get it from the UML
-  utilities <http://user-mode-linux.sourceforge.net/dl-sf.html#UML
+  utilities <http://user-mode-linux.sourceforge.net/
   utilities>  tar file in tools/moo.
 
 
@@ -4599,7 +4542,7 @@
 
   Michael Jennings <mikejen at hevanet.com>  sent in some material which
   is now gracing the top of the  index  page <http://user-mode-
-  linux.sourceforge.net/index.html>  of this site.
+  linux.sourceforge.net/>  of this site.
 
   SGI <http://www.sgi.com>  (and more specifically Ralf Baechle <ralf at
   uni-koblenz.de> ) gave me an account on oss.sgi.com
diff --git a/Documentation/usb/ehci.txt b/Documentation/usb/ehci.txt
index 1536b7e75134..9dcafa7d930d 100644
--- a/Documentation/usb/ehci.txt
+++ b/Documentation/usb/ehci.txt
@@ -9,7 +9,7 @@ compatible with the USB 1.1 standard. It defines three transfer speeds:
     - "Low Speed" 1.5 Mbit/sec
 
 USB 1.1 only addressed full speed and low speed.  High speed devices
-can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds. 
+can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
 
 USB 1.1 devices may also be used on USB 2.0 systems.  When plugged
 into an EHCI controller, they are given to a USB 1.1 "companion"
diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.txt
new file mode 100644
index 000000000000..80f4ef0eb75b
--- /dev/null
+++ b/Documentation/usb/gadget_multi.txt
@@ -0,0 +1,150 @@
+                                                             -*- org -*-
+
+* Overview
+
+The Multifunction Composite Gadget (or g_multi) is a composite gadget
+that makes extensive use of the composite framework to provide
+a... multifunction gadget.
+
+In it's standard configuration it provides a single USB configuration
+with RNDIS[1] (that is Ethernet), USB CDC[2] ACM (that is serial) and
+USB Mass Storage functions.
+
+A CDC ECM (Ethernet) function may be turned on via a Kconfig option
+and RNDIS can be turned off.  If they are both enabled the gadget will
+have two configurations -- one with RNDIS and another with CDC ECM[3].
+
+Please not that if you use non-standard configuration (that is enable
+CDC ECM) you may need to change vendor and/or product ID.
+
+* Host drivers
+
+To make use of the gadget one needs to make it work on host side --
+without that there's no hope of achieving anything with the gadget.
+As one might expect, things one need to do very from system to system.
+
+** Linux host drivers
+
+Since the gadget uses standard composite framework and appears as such
+to Linux host it does not need any additional drivers on Linux host
+side.  All the functions are handled by respective drivers developed
+for them.
+
+This is also true for two configuration set-up with RNDIS
+configuration being the first one.  Linux host will use the second
+configuration with CDC ECM which should work better under Linux.
+
+** Windows host drivers
+
+For the gadget two work under Windows two conditions have to be met:
+
+*** Detecting as composite gadget
+
+First of all, Windows need to detect the gadget as an USB composite
+gadget which on its own have some conditions[4].  If they are met,
+Windows lets USB Generic Parent Driver[5] handle the device which then
+tries to much drivers for each individual interface (sort of, don't
+get into too many details).
+
+The good news is: you do not have to worry about most of the
+conditions!
+
+The only thing to worry is that the gadget has to have a single
+configuration so a dual RNDIS and CDC ECM gadget won't work unless you
+create a proper INF -- and of course, if you do submit it!
+
+*** Installing drivers for each function
+
+The other, trickier thing is making Windows install drivers for each
+individual function.
+
+For mass storage it is trivial since Windows detect it's an interface
+implementing USB Mass Storage class and selects appropriate driver.
+
+Things are harder with RDNIS and CDC ACM.
+
+**** RNDIS
+
+To make Windows select RNDIS drivers for the first function in the
+gadget, one needs to use the [[file:linux.inf]] file provided with this
+document.  It "attaches" Window's RNDIS driver to the first interface
+of the gadget.
+
+Please note, that while testing we encountered some issues[6] when
+RNDIS was not the first interface.  You do not need to worry abut it
+unless you are trying to develop your own gadget in which case watch
+out for this bug.
+
+**** CDC ACM
+
+Similarly, [[file:linux-cdc-acm.inf]] is provided for CDC ACM.
+
+**** Customising the gadget
+
+If you intend to hack the g_multi gadget be advised that rearranging
+functions will obviously change interface numbers for each of the
+functionality.  As an effect provided INFs won't work since they have
+interface numbers hard-coded in them (it's not hard to change those
+though[7]).
+
+This also means, that after experimenting with g_multi and changing
+provided functions one should change gadget's vendor and/or product ID
+so there will be no collision with other customised gadgets or the
+original gadget.
+
+Failing to comply may cause brain damage after wondering for hours why
+things don't work as intended before realising Windows have cached
+some drivers information (changing USB port may sometimes help plus
+you might try using USBDeview[8] to remove the phantom device).
+
+**** INF testing
+
+Provided INF files have been tested on Windows XP SP3, Windows Vista
+and Windows 7, all 32-bit versions.  It should work on 64-bit versions
+as well.  It most likely won't work on Windows prior to Windows XP
+SP2.
+
+** Other systems
+
+At this moment, drivers for any other systems have not been tested.
+Knowing how MacOS is based on BSD and BSD is an Open Source it is
+believed that it should (read: "I have no idea whether it will") work
+out-of-the-box.
+
+For more exotic systems I have even less to say...
+
+Any testing and drivers *are* *welcome*!
+
+* Authors
+
+This document has been written by Michal Nazarewicz
+([[mailto:mina86@mina86.com]]).  INF files have been hacked with
+support of Marek Szyprowski ([[mailto:m.szyprowski@samsung.com]]) and
+Xiaofan Chen ([[mailto:xiaofanc@gmail.com]]) basing on the MS RNDIS
+template[9], Microchip's CDC ACM INF file and David Brownell's
+([[mailto:dbrownell@users.sourceforge.net]]) original INF files.
+
+* Footnotes
+
+[1] Remote Network Driver Interface Specification,
+[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]].
+
+[2] Communications Device Class Abstract Control Model, spec for this
+and other USB classes can be found at
+[[http://www.usb.org/developers/devclass_docs/]].
+
+[3] CDC Ethernet Control Model.
+
+[4] [[http://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]]
+
+[5] [[http://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]]
+
+[6] To put it in some other nice words, Windows failed to respond to
+any user input.
+
+[7] You may find [[http://www.cygnal.org/ubb/Forum9/HTML/001050.html]]
+useful.
+
+[8] http://www.nirsoft.net/utils/usb_devices_view.html
+
+[9] [[http://msdn.microsoft.com/en-us/library/ff570620.aspx]]
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index eac7df94d8e3..61e67f6a20a0 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -151,88 +151,23 @@ instructions below to install the host side driver.
 
 Installing the Windows Host ACM Driver
 --------------------------------------
-To use the Windows ACM driver you must have the files "gserial.inf"
-and "usbser.sys" together in a folder on the Windows machine.
-
-The "gserial.inf" file is given here.
-
--------------------- CUT HERE --------------------
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%LINUX%
-DriverVer=08/17/2004,0.0.2.0
-; Copyright (C) 2004 Al Borchers (alborchers@steinerpoint.com)
-
-[Manufacturer]
-%LINUX%=GSerialDeviceList
-
-[GSerialDeviceList]
-%GSERIAL%=GSerialInstall, USB\VID_0525&PID_A4A7
-
-[DestinationDirs]
-DefaultDestDir=10,System32\Drivers
-
-[GSerialInstall]
-CopyFiles=GSerialCopyFiles
-AddReg=GSerialAddReg
-
-[GSerialCopyFiles]
-usbser.sys
-
-[GSerialAddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,usbser.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[GSerialInstall.Services]
-AddService = usbser,0x0002,GSerialService
-
-[GSerialService]
-DisplayName = %GSERIAL_DISPLAY_NAME%
-ServiceType = 1                  ; SERVICE_KERNEL_DRIVER
-StartType = 3                    ; SERVICE_DEMAND_START
-ErrorControl = 1                 ; SERVICE_ERROR_NORMAL
-ServiceBinary = %10%\System32\Drivers\usbser.sys
-LoadOrderGroup = Base
-
-[Strings]
-LINUX = "Linux"
-GSERIAL = "Gadget Serial"
-GSERIAL_DISPLAY_NAME = "USB Gadget Serial Driver"
--------------------- CUT HERE --------------------
-
-The "usbser.sys" file comes with various versions of Windows.
-For example, it can be found on Windows XP typically in
-
-  C:\WINDOWS\Driver Cache\i386\driver.cab
-
-Or it can be found on the Windows 98SE CD in the "win98" folder
-in the "DRIVER11.CAB" through "DRIVER20.CAB" cab files.  You will
-need the DOS "expand" program, the Cygwin "cabextract" program, or
-a similar program to unpack these cab files and extract "usbser.sys".
-
-For example, to extract "usbser.sys" into the current directory
-on Windows XP, open a DOS window and run a command like
-
-  expand C:\WINDOWS\Driver~1\i386\driver.cab -F:usbser.sys .
-
-(Thanks to Nishant Kamat for pointing out this DOS command.)
+To use the Windows ACM driver you must have the "linux-cdc-acm.inf"
+file (provided along this document) which supports all recent versions
+of Windows.
 
 When the gadget serial driver is loaded and the USB device connected
 to the Windows host with a USB cable, Windows should recognize the
 gadget serial device and ask for a driver.  Tell Windows to find the
-driver in the folder that contains "gserial.inf" and "usbser.sys".
+driver in the folder that contains the "linux-cdc-acm.inf" file.
 
 For example, on Windows XP, when the gadget serial device is first
 plugged in, the "Found New Hardware Wizard" starts up.  Select
-"Install from a list or specific location (Advanced)", then on
-the next screen select "Include this location in the search" and
-enter the path or browse to the folder containing "gserial.inf" and
-"usbser.sys".  Windows will complain that the Gadget Serial driver
-has not passed Windows Logo testing, but select "Continue anyway"
-and finish the driver installation.
+"Install from a list or specific location (Advanced)", then on the
+next screen select "Include this location in the search" and enter the
+path or browse to the folder containing the "linux-cdc-acm.inf" file.
+Windows will complain that the Gadget Serial driver has not passed
+Windows Logo testing, but select "Continue anyway" and finish the
+driver installation.
 
 On Windows XP, in the "Device Manager" (under "Control Panel",
 "System", "Hardware") expand the "Ports (COM & LPT)" entry and you
@@ -345,5 +280,3 @@ you should be able to send data back and forth between the gadget
 side and host side systems.  Anything you type on the terminal
 window on the gadget side should appear in the terminal window on
 the host side and vice versa.
-
-
diff --git a/Documentation/usb/hotplug.txt b/Documentation/usb/hotplug.txt
index f53170665f37..4c945716a660 100644
--- a/Documentation/usb/hotplug.txt
+++ b/Documentation/usb/hotplug.txt
@@ -10,7 +10,7 @@ immediately usable.  That means the system must do many things, including:
 
     - Bind a driver to that device.  Bus frameworks do that using a
       device driver's probe() routine.
-    
+
     - Tell other subsystems to configure the new device.  Print
       queues may need to be enabled, networks brought up, disk
       partitions mounted, and so on.  In some cases these will
@@ -84,7 +84,7 @@ USB MODUTILS SUPPORT
 Current versions of module-init-tools will create a "modules.usbmap" file
 which contains the entries from each driver's MODULE_DEVICE_TABLE.  Such
 files can be used by various user mode policy agents to make sure all the
-right driver modules get loaded, either at boot time or later. 
+right driver modules get loaded, either at boot time or later.
 
 See <linux/usb.h> for full information about such table entries; or look
 at existing drivers.  Each table entry describes one or more criteria to
diff --git a/Documentation/usb/linux-cdc-acm.inf b/Documentation/usb/linux-cdc-acm.inf
new file mode 100644
index 000000000000..612e7220fb29
--- /dev/null
+++ b/Documentation/usb/linux-cdc-acm.inf
@@ -0,0 +1,107 @@
+; Windows USB CDC ACM Setup File
+
+; Based on INF template which was:
+;     Copyright (c) 2000 Microsoft Corporation
+;     Copyright (c) 2007 Microchip Technology Inc.
+; likely to be covered by the MLPL as found at:
+;    <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
+; For use only on Windows operating systems.
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%Linux%
+DriverVer=11/15/2007,5.1.2600.0
+
+[Manufacturer]
+%Linux%=DeviceList, NTamd64
+
+[DestinationDirs]
+DefaultDestDir=12
+
+
+;------------------------------------------------------------------------------
+;  Windows 2000/XP/Vista-32bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.nt]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.nt
+AddReg=DriverInstall.nt.AddReg
+
+[DriverCopyFiles.nt]
+usbser.sys,,,0x20
+
+[DriverInstall.nt.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,USBSER.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.nt.Services]
+AddService=usbser, 0x00000002, DriverService.nt
+
+[DriverService.nt]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\USBSER.sys
+
+;------------------------------------------------------------------------------
+;  Vista-64bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.NTamd64]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.NTamd64
+AddReg=DriverInstall.NTamd64.AddReg
+
+[DriverCopyFiles.NTamd64]
+USBSER.sys,,,0x20
+
+[DriverInstall.NTamd64.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,USBSER.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.NTamd64.Services]
+AddService=usbser, 0x00000002, DriverService.NTamd64
+
+[DriverService.NTamd64]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\USBSER.sys
+
+
+;------------------------------------------------------------------------------
+;  Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID.  Use the format as shown
+; below.
+; Note: One INF file can be used for multiple devices with different
+;       VID and PIDs.  For each supported device, append
+;       ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[SourceDisksFiles]
+[SourceDisksNames]
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
+
+
+;------------------------------------------------------------------------------
+;  String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+Linux               = "Linux Developer Community"
+DESCRIPTION         = "Gadget Serial"
+SERVICE             = "USB RS-232 Emulation Driver"
diff --git a/Documentation/usb/linux.inf b/Documentation/usb/linux.inf
index 2f7217d124ff..4dee95851224 100644
--- a/Documentation/usb/linux.inf
+++ b/Documentation/usb/linux.inf
@@ -1,200 +1,66 @@
-; MS-Windows driver config matching some basic modes of the
-; Linux-USB Ethernet/RNDIS gadget firmware:
-;
-;  - RNDIS plus CDC Ethernet ... this may be familiar as a DOCSIS
-;    cable modem profile, and supports most non-Microsoft USB hosts
-;
-;  - RNDIS plus CDC Subset ... used by hardware that incapable of
-;    full CDC Ethernet support.
-;
-; Microsoft only directly supports RNDIS drivers, and bundled them into XP.
-; The Microsoft "Remote NDIS USB Driver Kit" is currently found at:
-;   http://www.microsoft.com/whdc/hwdev/resources/HWservices/rndis.mspx
-
+; Based on template INF file found at
+;    <http://msdn.microsoft.com/en-us/library/ff570620.aspx>
+; which was:
+;    Copyright (c) Microsoft Corporation
+; and released under the MLPL as found at:
+;    <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
+; For use only on Windows operating systems.
 
 [Version]
-Signature           = "$CHICAGO$"
+Signature           = "$Windows NT$"
 Class               = Net
 ClassGUID           = {4d36e972-e325-11ce-bfc1-08002be10318}
 Provider            = %Linux%
-Compatible          = 1
-MillenniumPreferred = .ME
-DriverVer           = 03/30/2004,0.0.0.0
-; catalog file would be used by WHQL
-;CatalogFile         = Linux.cat
+DriverVer           = 06/21/2006,6.0.6000.16384
 
 [Manufacturer]
-%Linux%          = LinuxDevices,NT.5.1
+%Linux%             = LinuxDevices,NTx86,NTamd64,NTia64
+
+; Decoration for x86 architecture
+[LinuxDevices.NTx86]
+%LinuxDevice%       = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
 
-[LinuxDevices]
-; NetChip IDs, used by both firmware modes
-%LinuxDevice%    = RNDIS, USB\VID_0525&PID_a4a2
+; Decoration for x64 architecture
+[LinuxDevices.NTamd64]
+%LinuxDevice%       = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
 
-[LinuxDevices.NT.5.1]
-%LinuxDevice%    = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
+; Decoration for ia64 architecture
+[LinuxDevices.NTia64]
+%LinuxDevice%       = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
 
+;@@@ This is the common setting for setup
 [ControlFlags]
 ExcludeFromSelect=*
 
-; Windows 98, Windows 98 Second Edition specific sections --------
-
-[RNDIS]
-DeviceID        = usb8023
-MaxInstance     = 512
-DriverVer           = 03/30/2004,0.0.0.0
-AddReg          = RNDIS_AddReg_98, RNDIS_AddReg_Common
-
-[RNDIS_AddReg_98]
-HKR, ,               DevLoader,        0, *ndis
-HKR, ,               DeviceVxDs,       0, usb8023.sys
-HKR, NDIS,           LogDriverName,    0, "usb8023"
-HKR, NDIS,           MajorNdisVersion, 1, 5
-HKR, NDIS,           MinorNdisVersion, 1, 0
-HKR, Ndi\Interfaces, DefUpper,         0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, DefLower,         0, "ethernet"
-HKR, Ndi\Interfaces, UpperRange,       0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, LowerRange,       0, "ethernet"
-HKR, Ndi\Install,    ndis3,            0, "RNDIS_Install_98"
-HKR, Ndi\Install,    ndis4,            0, "RNDIS_Install_98"
-HKR, Ndi\Install,    ndis5,            0, "RNDIS_Install_98"
-HKR, Ndi,            DeviceId,         0, "USB\VID_0525&PID_a4a2"
-
-[RNDIS_Install_98]
-CopyFiles=RNDIS_CopyFiles_98
-
-[RNDIS_CopyFiles_98]
-usb8023.sys, usb8023w.sys, , 0 
-rndismp.sys, rndismpw.sys, , 0 
-
-; Windows Millennium Edition specific sections --------------------
-
-[RNDIS.ME]
-DeviceID        = usb8023
-MaxInstance     = 512
-DriverVer           = 03/30/2004,0.0.0.0
-AddReg          = RNDIS_AddReg_ME, RNDIS_AddReg_Common
-Characteristics = 0x84   ; NCF_PHYSICAL + NCF_HAS_UI
-BusType         = 15
-
-[RNDIS_AddReg_ME]
-HKR, ,               DevLoader,        0, *ndis
-HKR, ,               DeviceVxDs,       0, usb8023.sys
-HKR, NDIS,           LogDriverName,    0, "usb8023"
-HKR, NDIS,           MajorNdisVersion, 1, 5
-HKR, NDIS,           MinorNdisVersion, 1, 0
-HKR, Ndi\Interfaces, DefUpper,         0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, DefLower,         0, "ethernet"
-HKR, Ndi\Interfaces, UpperRange,       0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, LowerRange,       0, "ethernet"
-HKR, Ndi\Install,    ndis3,            0, "RNDIS_Install_ME"
-HKR, Ndi\Install,    ndis4,            0, "RNDIS_Install_ME"
-HKR, Ndi\Install,    ndis5,            0, "RNDIS_Install_ME"
-HKR, Ndi,            DeviceId,         0, "USB\VID_0525&PID_a4a2"
-
-[RNDIS_Install_ME]
-CopyFiles=RNDIS_CopyFiles_ME
-
-[RNDIS_CopyFiles_ME]
-usb8023.sys, usb8023m.sys, , 0 
-rndismp.sys, rndismpm.sys, , 0 
-
-; Windows 2000 specific sections ---------------------------------
-
-[RNDIS.NT]
-Characteristics = 0x84   ; NCF_PHYSICAL + NCF_HAS_UI
-BusType         = 15
-DriverVer           = 03/30/2004,0.0.0.0
-AddReg          = RNDIS_AddReg_NT, RNDIS_AddReg_Common
-CopyFiles       = RNDIS_CopyFiles_NT
-
-[RNDIS.NT.Services]
-AddService = USB_RNDIS, 2, RNDIS_ServiceInst_NT, RNDIS_EventLog
-
-[RNDIS_CopyFiles_NT]
-; no rename of files on Windows 2000, use the 'k' names as is
-usb8023k.sys, , , 0 
-rndismpk.sys, , , 0 
-
-[RNDIS_ServiceInst_NT]
-DisplayName     = %ServiceDisplayName%
-ServiceType     = 1 
-StartType       = 3 
-ErrorControl    = 1 
-ServiceBinary   = %12%\usb8023k.sys    
-LoadOrderGroup  = NDIS
-AddReg          = RNDIS_WMI_AddReg_NT
-
-[RNDIS_WMI_AddReg_NT]
-HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismpk.sys"
-
-; Windows XP specific sections -----------------------------------
-
+; DDInstall section
+; References the in-build Netrndis.inf
 [RNDIS.NT.5.1]
-Characteristics = 0x84   ; NCF_PHYSICAL + NCF_HAS_UI
-BusType         = 15
-DriverVer           = 03/30/2004,0.0.0.0
-AddReg          = RNDIS_AddReg_NT, RNDIS_AddReg_Common
-; no copyfiles - the files are already in place
-
+Characteristics     = 0x84   ; NCF_PHYSICAL + NCF_HAS_UI
+BusType             = 15
+; NEVER REMOVE THE FOLLOWING REFERENCE FOR NETRNDIS.INF
+include             = netrndis.inf
+needs               = Usb_Rndis.ndi
+AddReg              = Rndis_AddReg_Vista
+
+; DDInstal.Services section
 [RNDIS.NT.5.1.Services]
-AddService      = USB_RNDIS, 2, RNDIS_ServiceInst_51, RNDIS_EventLog
-
-[RNDIS_ServiceInst_51]
-DisplayName     = %ServiceDisplayName%
-ServiceType     = 1 
-StartType       = 3 
-ErrorControl    = 1 
-ServiceBinary   = %12%\usb8023.sys    
-LoadOrderGroup  = NDIS
-AddReg          = RNDIS_WMI_AddReg_51
-
-[RNDIS_WMI_AddReg_51]
-HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismp.sys"
-
-; Windows 2000 and Windows XP common sections --------------------
-
-[RNDIS_AddReg_NT]
-HKR, Ndi,               Service,        0, "USB_RNDIS"
-HKR, Ndi\Interfaces,    UpperRange,     0, "ndis5" 
-HKR, Ndi\Interfaces,    LowerRange,     0, "ethernet"
-
-[RNDIS_EventLog]
-AddReg = RNDIS_EventLog_AddReg
-
-[RNDIS_EventLog_AddReg]
-HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
-HKR, , TypesSupported,   0x00010001, 7
-
-; Common Sections -------------------------------------------------
-
-[RNDIS_AddReg_Common]
-HKR, NDI\params\NetworkAddress, ParamDesc,  0, %NetworkAddress%
-HKR, NDI\params\NetworkAddress, type,       0, "edit"
-HKR, NDI\params\NetworkAddress, LimitText,  0, "12"
-HKR, NDI\params\NetworkAddress, UpperCase,  0, "1"
-HKR, NDI\params\NetworkAddress, default,    0, " "
-HKR, NDI\params\NetworkAddress, optional,   0, "1"
-
-[SourceDisksNames]
-1=%SourceDisk%,,1
-
-[SourceDisksFiles]
-usb8023m.sys=1
-rndismpm.sys=1
-usb8023w.sys=1
-rndismpw.sys=1
-usb8023k.sys=1
-rndismpk.sys=1
-
-[DestinationDirs]
-RNDIS_CopyFiles_98    = 10, system32/drivers
-RNDIS_CopyFiles_ME    = 10, system32/drivers
-RNDIS_CopyFiles_NT    = 12
+include             = netrndis.inf
+needs               = Usb_Rndis.ndi.Services
+
+; Optional registry settings. You can modify as needed.
+[RNDIS_AddReg_Vista]
+HKR, NDI\params\VistaProperty, ParamDesc,  0, %Vista_Property%
+HKR, NDI\params\VistaProperty, type,       0, "edit"
+HKR, NDI\params\VistaProperty, LimitText,  0, "12"
+HKR, NDI\params\VistaProperty, UpperCase,  0, "1"
+HKR, NDI\params\VistaProperty, default,    0, " "
+HKR, NDI\params\VistaProperty, optional,   0, "1"
+
+; No sys copyfiles - the sys files are already in-build
+; (part of the operating system).
+; We do not support XP SP1-, 2003 SP1-, ME, 9x.
 
 [Strings]
-ServiceDisplayName    = "USB Remote NDIS Network Device Driver"
-NetworkAddress        = "Network Address"
 Linux                 = "Linux Developer Community"
 LinuxDevice           = "Linux USB Ethernet/RNDIS Gadget"
-SourceDisk            = "Ethernet/RNDIS Gadget Driver Install Disk"
-
+Vista_Property        = "Optional Vista Property"
diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt
index e43cfffaa100..86302cd53ed3 100644
--- a/Documentation/usb/mtouchusb.txt
+++ b/Documentation/usb/mtouchusb.txt
@@ -54,10 +54,6 @@ generic functions like calibrations, resets, and vendor information can be
 requested from the userspace (And the drivers would handle the vendor specific
 tasks).
 
-ADDITIONAL INFORMATION/UPDATES/X CONFIGURATION EXAMPLE:
-
-http://groomlakelabs.com/grandamp/code/microtouch/
-
 TODO:
 
 Implement a control urb again to handle requests to and from the device
@@ -68,7 +64,7 @@ DISCLAIMER:
 I am not a MicroTouch/3M employee, nor have I ever been.  3M does not support 
 this driver!  If you want touch drivers only supported within X, please go to:
 
-http://www.3m.com/3MTouchSystems/downloads/
+http://www.3m.com/3MTouchSystems/
 
 THANKS:
 
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index fafcd4723260..afe596d5f201 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -1,12 +1,17 @@
 /proc/bus/usb filesystem output
 ===============================
-(version 2003.05.30)
+(version 2010.09.13)
 
 
 The usbfs filesystem for USB devices is traditionally mounted at
 /proc/bus/usb.  It provides the /proc/bus/usb/devices file, as well as
 the /proc/bus/usb/BBB/DDD files.
 
+In many modern systems the usbfs filsystem isn't used at all.  Instead
+USB device nodes are created under /dev/usb/ or someplace similar.  The
+"devices" file is available in debugfs, typically as
+/sys/kernel/debug/usb/devices.
+
 
 **NOTE**: If /proc/bus/usb appears empty, and a host controller
 	  driver has been linked, then you need to mount the
@@ -106,8 +111,8 @@ Legend:
 
 Topology info:
 
-T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd
-|   |      |      |       |       |      |        |       |__MaxChildren
+T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=dddd MxCh=dd
+|   |      |      |       |       |      |        |        |__MaxChildren
 |   |      |      |       |       |      |        |__Device Speed in Mbps
 |   |      |      |       |       |      |__DeviceNumber
 |   |      |      |       |       |__Count of devices at this level
@@ -120,8 +125,13 @@ T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd
     Speed may be:
     	1.5	Mbit/s for low speed USB
 	12	Mbit/s for full speed USB
-	480	Mbit/s for high speed USB (added for USB 2.0)
+	480	Mbit/s for high speed USB (added for USB 2.0);
+		  also used for Wireless USB, which has no fixed speed
+	5000	Mbit/s for SuperSpeed USB (added for USB 3.0)
 
+    For reasons lost in the mists of time, the Port number is always
+    too low by 1.  For example, a device plugged into port 4 will
+    show up with "Port=03".
 
 Bandwidth info:
 B:  Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd
@@ -291,7 +301,7 @@ Here's an example, from a system which has a UHCI root hub,
 an external hub connected to the root hub, and a mouse and
 a serial converter connected to the external hub.
 
-T:  Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
+T:  Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 2
 B:  Alloc= 28/900 us ( 3%), #Int=  2, #Iso=  0
 D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
 P:  Vendor=0000 ProdID=0000 Rev= 0.00
@@ -301,21 +311,21 @@ C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
 I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
 E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
 
-T:  Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 4
+T:  Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 4
 D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
 P:  Vendor=0451 ProdID=1446 Rev= 1.00
 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
 I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
 E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
 
-T:  Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=1.5 MxCh= 0
+T:  Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=1.5  MxCh= 0
 D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
 P:  Vendor=04b4 ProdID=0001 Rev= 0.00
 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
 I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=mouse
 E:  Ad=81(I) Atr=03(Int.) MxPS=   3 Ivl= 10ms
 
-T:  Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
+T:  Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=12   MxCh= 0
 D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
 P:  Vendor=0565 ProdID=0001 Rev= 1.08
 S:  Manufacturer=Peracom Networks, Inc.
@@ -330,12 +340,12 @@ E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=  8ms
 Selecting only the "T:" and "I:" lines from this (for example, by using
 "procusb ti"), we have:
 
-T:  Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
-T:  Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 4
+T:  Bus=00 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 2
+T:  Bus=00 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 4
 I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
-T:  Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=1.5 MxCh= 0
+T:  Bus=00 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=1.5  MxCh= 0
 I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=mouse
-T:  Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
+T:  Bus=00 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=  4 Spd=12   MxCh= 0
 I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=serial
 
 
diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index f4d214510259..5bd7926185e8 100644
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -83,7 +83,7 @@ HandSpring Visor, Palm USB, and Clié USB driver
   parameters.  e.g. modprobe visor vendor=0x54c product=0x66
   
   There is a webpage and mailing lists for this portion of the driver at:
-  http://usbvisor.sourceforge.net/
+  http://sourceforge.net/projects/usbvisor/
 
   For any questions or problems with this driver, please contact Greg
   Kroah-Hartman at greg@kroah.com
@@ -184,7 +184,7 @@ Keyspan USA-series Serial Adapters
     functionality.
   
   More information is available at:
-        http://misc.nu/hugh/keyspan.html
+        http://www.carnationsoftware.com/carnation/Keyspan.html
    
   For any questions or problems with this driver, please contact Hugh
   Blemings at hugh@misc.nu
diff --git a/Documentation/video4linux/API.html b/Documentation/video4linux/API.html
index d749d41f647b..d72fd2aa9158 100644
--- a/Documentation/video4linux/API.html
+++ b/Documentation/video4linux/API.html
@@ -17,7 +17,7 @@
    </tr>
    <tr>
     <td>
-     <a href="http://www.linuxtv.org/downloads/video4linux/API/V4L2_API">V4L2 API</a>
+     <a href="http://v4l2spec.bytesex.org/spec-single/v4l2.html">V4L2 API</a>
     </td>
     <td>Should be used for new projects
     </td>
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 16ca030e1185..87c46347bd63 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -17,9 +17,9 @@
  16 -> DVBWorld DVB-S2 2005                                [0001:2005]
  17 -> NetUP Dual DVB-S2 CI                                [1b55:2a2c]
  18 -> Hauppauge WinTV-HVR1270                             [0070:2211]
- 19 -> Hauppauge WinTV-HVR1275                             [0070:2215]
- 20 -> Hauppauge WinTV-HVR1255                             [0070:2251]
- 21 -> Hauppauge WinTV-HVR1210                             [0070:2291,0070:2295]
+ 19 -> Hauppauge WinTV-HVR1275                             [0070:2215,0070:221d,0070:22f2]
+ 20 -> Hauppauge WinTV-HVR1255                             [0070:2251,0070:2259,0070:22f1]
+ 21 -> Hauppauge WinTV-HVR1210                             [0070:2291,0070:2295,0070:2299,0070:229d,0070:22f0,0070:22f3,0070:22f4,0070:22f5]
  22 -> Mygica X8506 DMB-TH                                 [14f1:8651]
  23 -> Magic-Pro ProHDTV Extreme 2                         [14f1:8657]
  24 -> Hauppauge WinTV-HVR1850                             [0070:8541]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index f2510541373b..42517d9121de 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -83,3 +83,4 @@
  82 -> WinFast DTV2000 H rev. J                            [107d:6f2b]
  83 -> Prof 7301 DVB-S/S2                                  [b034:3034]
  84 -> Samsung SMT 7020 DVB-S                              [18ac:dc00,18ac:dccd]
+ 85 -> Twinhan VP-1027 DVB-S                               [1822:0023]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 3a623aaeae5f..ac2616a62fc3 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -31,6 +31,7 @@
  30 -> Videology 20K14XUSB USB2.0               (em2820/em2840)
  31 -> Usbgear VD204v9                          (em2821)
  32 -> Supercomp USB 2.0 TV                     (em2821)
+ 33 -> Elgato Video Capture                     (em2860)        [0fd9:0033]
  34 -> Terratec Cinergy A Hybrid XS             (em2860)        [0ccd:004f]
  35 -> Typhoon DVD Maker                        (em2860)
  36 -> NetGMBH Cam                              (em2860)
@@ -45,7 +46,7 @@
  45 -> Pinnacle PCTV DVB-T                      (em2870)
  46 -> Compro, VideoMate U3                     (em2870)        [185b:2870]
  47 -> KWorld DVB-T 305U                        (em2880)        [eb1a:e305]
- 48 -> KWorld DVB-T 310U                        (em2880)        [eb1a:e310]
+ 48 -> KWorld DVB-T 310U                        (em2880)
  49 -> MSI DigiVox A/D                          (em2880)        [eb1a:e310]
  50 -> MSI DigiVox A/D II                       (em2880)        [eb1a:e320]
  51 -> Terratec Hybrid XS Secam                 (em2880)        [0ccd:004c]
@@ -72,3 +73,4 @@
  73 -> Reddo DVB-C USB TV Box                   (em2870)
  74 -> Actionmaster/LinXcel/Digitus VC211A      (em2800)
  75 -> Dikom DK300                              (em2882)
+ 76 -> KWorld PlusTV 340U or UB435-Q (ATSC)     (em2870)        [1b80:a340]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 1387a69ae3aa..8d9afc7d8014 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -126,7 +126,7 @@
 125 -> Beholder BeholdTV 409                    [0000:4090]
 126 -> Beholder BeholdTV 505 FM                 [5ace:5050]
 127 -> Beholder BeholdTV 507 FM / BeholdTV 509 FM [5ace:5070,5ace:5090]
-128 -> Beholder BeholdTV Columbus TVFM          [0000:5201]
+128 -> Beholder BeholdTV Columbus TV/FM         [0000:5201]
 129 -> Beholder BeholdTV 607 FM                 [5ace:6070]
 130 -> Beholder BeholdTV M6                     [5ace:6190]
 131 -> Twinhan Hybrid DTV-DVB 3056 PCI          [1822:0022]
@@ -178,4 +178,5 @@
 177 -> Hawell HW-404M7
 178 -> Beholder BeholdTV H7                     [5ace:7190]
 179 -> Beholder BeholdTV A7                     [5ace:7090]
-180 -> Avermedia M733A                          [1461:4155,1461:4255]
+180 -> Avermedia PCI M733A                      [1461:4155,1461:4255]
+181 -> TechoTrend TT-budget T-3000              [13c2:2804]
diff --git a/Documentation/video4linux/CQcam.txt b/Documentation/video4linux/CQcam.txt
index d230878e473e..8977e7ce4dab 100644
--- a/Documentation/video4linux/CQcam.txt
+++ b/Documentation/video4linux/CQcam.txt
@@ -203,11 +203,11 @@ The V4L2 API spec:
   http://v4l2spec.bytesex.org/
 
 Some web pages about the quickcams:
-   http://www.dkfz-heidelberg.de/Macromol/wedemann/mini-HOWTO-cqcam.html
+   http://www.pingouin-land.com/howto/QuickCam-HOWTO.html
 
    http://www.crynwr.com/qcpc/            QuickCam Third-Party Drivers
    http://www.crynwr.com/qcpc/re.html     Some Reverse Engineering
-   http://cse.unl.edu/~cluening/gqcam/    v4l client
+   http://www.wirelesscouch.net/software/gqcam/   v4l client
    http://phobos.illtel.denver.co.us/pub/qcread/ doesn't use v4l
    ftp://ftp.cs.unm.edu/pub/chris/quickcam/   Has lots of drivers
    http://www.cs.duke.edu/~reynolds/quickcam/ Has lots of information
diff --git a/Documentation/video4linux/README.cpia b/Documentation/video4linux/README.cpia
index 19cd3bf24981..8a747fee661f 100644
--- a/Documentation/video4linux/README.cpia
+++ b/Documentation/video4linux/README.cpia
@@ -185,7 +185,7 @@ THANKS (in no particular order):
 ---------------------------------------------------------------------------
 REFERENCES
 
-   1. http://www.risc.uni-linz.ac.at/people/ppregler
+   1. http://www.risc.uni-linz.ac.at/
       mailto:Peter_Pregler@email.com
    2. see the file COPYING in the top directory of the kernel tree
    3. http://webcam.sourceforge.net/
diff --git a/Documentation/video4linux/README.ivtv b/Documentation/video4linux/README.ivtv
index 73df22c40bfe..42b06686eb78 100644
--- a/Documentation/video4linux/README.ivtv
+++ b/Documentation/video4linux/README.ivtv
@@ -10,7 +10,7 @@ Hauppauge PVR-350.
 NOTE: this driver requires the latest encoder firmware (version 2.06.039, size
 376836 bytes). Get the firmware from here:
 
-http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz
+http://dl.ivtvdriver.org/ivtv/firmware/
 
 NOTE: 'normal' TV applications do not work with this driver, you need
 an application that can handle MPEG input such as mplayer, xine, MythTV,
diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran
index 0e89e7676298..00e3f9267814 100644
--- a/Documentation/video4linux/Zoran
+++ b/Documentation/video4linux/Zoran
@@ -174,7 +174,7 @@ and is used in Argentinia, Uruguay, an a few others
 We do not talk about how the audio is broadcast !
 
 A rather good sites about the TV standards are:
-http://www.sony.jp/ServiceArea/Voltage_map/
+http://www.sony.jp/support/
 http://info.electronicwerkstatt.de/bereiche/fernsehtechnik/frequenzen_und_normen/Fernsehnormen/
 and http://www.cabl.com/restaurant/channel.html
 
@@ -330,7 +330,7 @@ These extensions are known as the v4l/mjpeg extensions. See zoran.h for
 details (structs/ioctls).
 
 Information - video4linux:
-http://roadrunner.swansea.linux.org.uk/v4lapi.shtml
+http://linux.bytesex.org/v4l2/API.html
 Documentation/video4linux/API.html
 /usr/include/linux/videodev.h
 
@@ -390,7 +390,7 @@ BUZIOC_G_STATUS
 Get the status of the input lines (video source connected/norm).
 
 For programming example, please, look at lavrec.c and lavplay.c code in
-lavtools-1.2p2 package (URL: http://www.cicese.mx/~mirsev/DC10plus/)
+lavtools-1.2p2 package (URL: http://www.cicese.mx/)
 and the 'examples' directory in the original Buz driver distribution.
 
 Additional notes for software developers:
diff --git a/Documentation/video4linux/bttv/Cards b/Documentation/video4linux/bttv/Cards
index d3389655ad96..12217fc49725 100644
--- a/Documentation/video4linux/bttv/Cards
+++ b/Documentation/video4linux/bttv/Cards
@@ -802,7 +802,7 @@ Kworld (www.kworld.com.tw)
 
 
 
-JTT/ Justy Corp.http://www.justy.co.jp/ (www.jtt.com.jp website down)
+JTT/ Justy Corp.(http://www.jtt.ne.jp/)
 ---------------------------------------------------------------------
    JTT-02 (JTT TV) "TV watchmate pro" (bt848)
 
@@ -828,7 +828,7 @@ Eline www.eline-net.com/
    Eline Vision TVMaster / TVMaster FM (ELV-TVM/ ELV-TVM-FM) = LR26  (bt878)
    Eline Vision TVMaster-2000 (ELV-TVM-2000, ELV-TVM-2000-FM)= LR138 (saa713x)
 
-Spirit http://www.spiritmodems.com.au/
+Spirit 
 ------
    Spirit TV Tuner/Video Capture Card (bt848)
 
@@ -959,6 +959,6 @@ Asus www.asuscom.com
 
 Hoontech
 --------
-http://www.hoontech.com/korean/download/down_driver_list03.html
+http://www.hoontech.de/
    HART Vision 848 (H-ART Vision 848)
    HART Vision 878 (H-Art Vision 878)
diff --git a/Documentation/video4linux/bttv/MAKEDEV b/Documentation/video4linux/bttv/MAKEDEV
index 6c29ba43b6c6..093c0cd18042 100644
--- a/Documentation/video4linux/bttv/MAKEDEV
+++ b/Documentation/video4linux/bttv/MAKEDEV
@@ -14,12 +14,11 @@ function makedev () {
 	ln -s /dev/${1}0 /dev/$1
 }
 
-# see http://roadrunner.swansea.uk.linux.org/v4lapi.shtml
+# see http://linux.bytesex.org/v4l2/API.html
 
 echo "*** new device names ***"
 makedev video 0
 makedev radio 64
-makedev vtx 192
 makedev vbi 224
 
 #echo "*** old device names (for compatibility only) ***"
diff --git a/Documentation/video4linux/bttv/Specs b/Documentation/video4linux/bttv/Specs
index 79b9e576fe79..f32466cdae05 100644
--- a/Documentation/video4linux/bttv/Specs
+++ b/Documentation/video4linux/bttv/Specs
@@ -1,3 +1,3 @@
 Philips		http://www.Semiconductors.COM/pip/
-Conexant	http://www.conexant.com/techinfo/default.asp
-Micronas	http://www.micronas.de/pages/product_documentation/index.html
+Conexant	http://www.conexant.com/
+Micronas	http://www.micronas.com/en/home/index.html
diff --git a/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt b/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
index faccee68f603..f4329a38878e 100644
--- a/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
+++ b/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
@@ -44,7 +44,7 @@ http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf
 This data sheet (google search) seems to have a lovely description of the
 RC5 basics
 
-http://users.pandora.be/nenya/electronics/rc5/  and more data
+http://www.nenya.be/beor/electronics/rc5.htm  and more data
 
 http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt
 and even a reference to how to decode a bi-phase data stream.
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index f13eb036c439..6a562eeeb4cd 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -29,8 +29,12 @@ zc3xx		041e:4029	Creative WebCam Vista Pro
 zc3xx		041e:4034	Creative Instant P0620
 zc3xx		041e:4035	Creative Instant P0620D
 zc3xx		041e:4036	Creative Live !
+sq930x		041e:4038	Creative Joy-IT
 zc3xx		041e:403a	Creative Nx Pro 2
 spca561		041e:403b	Creative Webcam Vista (VF0010)
+sq930x		041e:403c	Creative Live! Ultra
+sq930x		041e:403d	Creative Live! Ultra for Notebooks
+sq930x		041e:4041	Creative Live! Motion
 zc3xx		041e:4051	Creative Live!Cam Notebook Pro (VF0250)
 ov519		041e:4052	Creative Live! VISTA IM
 zc3xx		041e:4053	Creative Live!Cam Video IM
@@ -138,6 +142,7 @@ finepix		04cb:013d	Fujifilm FinePix unknown model
 finepix		04cb:013f	Fujifilm FinePix F420
 sunplus		04f1:1001	JVC GC A50
 spca561		04fc:0561	Flexcam 100
+spca1528	04fc:1528	Sunplus MD80 clone
 sunplus		04fc:500c	Sunplus CA500C
 sunplus		04fc:504a	Aiptek Mini PenCam 1.3
 sunplus		04fc:504b	Maxell MaxPocket LE 1.3
@@ -253,6 +258,7 @@ pac7302		093a:2620	Apollo AC-905
 pac7302		093a:2621	PAC731x
 pac7302		093a:2622	Genius Eye 312
 pac7302		093a:2624	PAC7302
+pac7302		093a:2625	Genius iSlim 310
 pac7302		093a:2626	Labtec 2200
 pac7302		093a:2628	Genius iLook 300
 pac7302		093a:2629	Genious iSlim 300
@@ -296,12 +302,14 @@ sonixj		0c45:60fb	Surfer NoName
 sonixj		0c45:60fc	LG-LIC300
 sonixj		0c45:60fe	Microdia Audio
 sonixj		0c45:6100	PC Camera (SN9C128)
+sonixj		0c45:6102	PC Camera (SN9C128)
 sonixj		0c45:610a	PC Camera (SN9C128)
 sonixj		0c45:610b	PC Camera (SN9C128)
 sonixj		0c45:610c	PC Camera (SN9C128)
 sonixj		0c45:610e	PC Camera (SN9C128)
 sonixj		0c45:6128	Microdia/Sonix SNP325
 sonixj		0c45:612a	Avant Camera
+sonixj		0c45:612b	Speed-Link REFLECT2
 sonixj		0c45:612c	Typhoon Rasy Cam 1.3MPix
 sonixj		0c45:6130	Sonix Pccam
 sonixj		0c45:6138	Sn9c120 Mo4000
@@ -362,6 +370,8 @@ sq905c		2770:9052	Disney pix micro 2 (VGA)
 sq905c		2770:905c	All 11 known cameras with this ID
 sq905		2770:9120	All 24 known cameras with this ID
 sq905c		2770:913d	All 4 known cameras with this ID
+sq930x		2770:930b	Sweex Motion Tracking / I-Tec iCam Tracer
+sq930x		2770:930c	Trust WB-3500T / NSG Robbie 2.0
 spca500		2899:012c	Toptro Industrial
 ov519		8020:ef04	ov519
 spca508		8086:0110	Intel Easy PC Camera
diff --git a/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt b/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
index faccee68f603..a2fd363c40c8 100644
--- a/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
+++ b/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
@@ -44,7 +44,7 @@ http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf
 This data sheet (google search) seems to have a lovely description of the
 RC5 basics
 
-http://users.pandora.be/nenya/electronics/rc5/  and more data
+http://www.nenya.be/beor/electronics/rc5.htm and more data
 
 http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt
 and even a reference to how to decode a bi-phase data stream.
diff --git a/Documentation/video4linux/ibmcam.txt b/Documentation/video4linux/ibmcam.txt
index 397a94eb77b8..a51055211e62 100644
--- a/Documentation/video4linux/ibmcam.txt
+++ b/Documentation/video4linux/ibmcam.txt
@@ -27,9 +27,8 @@ SUPPORTED CAMERAS:
 
 Xirlink "C-It" camera, also known as "IBM PC Camera".
 The device uses proprietary ASIC (and compression method);
-it is manufactured by Xirlink. See http://www.xirlink.com/
-(renamed to http://www.veo.com), http://www.ibmpccamera.com,
-or http://www.c-itnow.com/ for details and pictures.
+it is manufactured by Xirlink. See http://xirlinkwebcam.sourceforge.net, 
+http://www.ibmpccamera.com, or http://www.c-itnow.com/ for details and pictures.
 
 This very chipset ("X Chip", as marked at the factory)
 is used in several other cameras, and they are supported
diff --git a/Documentation/video4linux/se401.txt b/Documentation/video4linux/se401.txt
index 7b9d1c960a10..bd6526ec8dd7 100644
--- a/Documentation/video4linux/se401.txt
+++ b/Documentation/video4linux/se401.txt
@@ -49,6 +49,6 @@ order to increase the throughput (and thus framerate).
 HELP:
 
 The latest info on this driver can be found at:
-http://www.chello.nl/~j.vreeken/se401/
+http://members.chello.nl/~j.vreeken/se401/
 And questions to me can be send to:
 pe1rxq@amsat.org
diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt
new file mode 100644
index 000000000000..8773778d23fc
--- /dev/null
+++ b/Documentation/video4linux/v4l2-controls.txt
@@ -0,0 +1,648 @@
+Introduction
+============
+
+The V4L2 control API seems simple enough, but quickly becomes very hard to
+implement correctly in drivers. But much of the code needed to handle controls
+is actually not driver specific and can be moved to the V4L core framework.
+
+After all, the only part that a driver developer is interested in is:
+
+1) How do I add a control?
+2) How do I set the control's value? (i.e. s_ctrl)
+
+And occasionally:
+
+3) How do I get the control's value? (i.e. g_volatile_ctrl)
+4) How do I validate the user's proposed control value? (i.e. try_ctrl)
+
+All the rest is something that can be done centrally.
+
+The control framework was created in order to implement all the rules of the
+V4L2 specification with respect to controls in a central place. And to make
+life as easy as possible for the driver developer.
+
+Note that the control framework relies on the presence of a struct v4l2_device
+for V4L2 drivers and struct v4l2_subdev for sub-device drivers.
+
+
+Objects in the framework
+========================
+
+There are two main objects:
+
+The v4l2_ctrl object describes the control properties and keeps track of the
+control's value (both the current value and the proposed new value).
+
+v4l2_ctrl_handler is the object that keeps track of controls. It maintains a
+list of v4l2_ctrl objects that it owns and another list of references to
+controls, possibly to controls owned by other handlers.
+
+
+Basic usage for V4L2 and sub-device drivers
+===========================================
+
+1) Prepare the driver:
+
+1.1) Add the handler to your driver's top-level struct:
+
+	struct foo_dev {
+		...
+		struct v4l2_ctrl_handler ctrl_handler;
+		...
+	};
+
+	struct foo_dev *foo;
+
+1.2) Initialize the handler:
+
+	v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+
+  The second argument is a hint telling the function how many controls this
+  handler is expected to handle. It will allocate a hashtable based on this
+  information. It is a hint only.
+
+1.3) Hook the control handler into the driver:
+
+1.3.1) For V4L2 drivers do this:
+
+	struct foo_dev {
+		...
+		struct v4l2_device v4l2_dev;
+		...
+		struct v4l2_ctrl_handler ctrl_handler;
+		...
+	};
+
+	foo->v4l2_dev.ctrl_handler = &foo->ctrl_handler;
+
+  Where foo->v4l2_dev is of type struct v4l2_device.
+
+  Finally, remove all control functions from your v4l2_ioctl_ops:
+  vidioc_queryctrl, vidioc_querymenu, vidioc_g_ctrl, vidioc_s_ctrl,
+  vidioc_g_ext_ctrls, vidioc_try_ext_ctrls and vidioc_s_ext_ctrls.
+  Those are now no longer needed.
+
+1.3.2) For sub-device drivers do this:
+
+	struct foo_dev {
+		...
+		struct v4l2_subdev sd;
+		...
+		struct v4l2_ctrl_handler ctrl_handler;
+		...
+	};
+
+	foo->sd.ctrl_handler = &foo->ctrl_handler;
+
+  Where foo->sd is of type struct v4l2_subdev.
+
+  And set all core control ops in your struct v4l2_subdev_core_ops to these
+  helpers:
+
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+
+  Note: this is a temporary solution only. Once all V4L2 drivers that depend
+  on subdev drivers are converted to the control framework these helpers will
+  no longer be needed.
+
+1.4) Clean up the handler at the end:
+
+	v4l2_ctrl_handler_free(&foo->ctrl_handler);
+
+
+2) Add controls:
+
+You add non-menu controls by calling v4l2_ctrl_new_std:
+
+	struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 min, s32 max, u32 step, s32 def);
+
+Menu controls are added by calling v4l2_ctrl_new_std_menu:
+
+	struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops,
+			u32 id, s32 max, s32 skip_mask, s32 def);
+
+These functions are typically called right after the v4l2_ctrl_handler_init:
+
+	v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+	v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+			V4L2_CID_CONTRAST, 0, 255, 1, 128);
+	v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops,
+			V4L2_CID_POWER_LINE_FREQUENCY,
+			V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0,
+			V4L2_CID_POWER_LINE_FREQUENCY_DISABLED);
+	...
+	if (foo->ctrl_handler.error) {
+		int err = foo->ctrl_handler.error;
+
+		v4l2_ctrl_handler_free(&foo->ctrl_handler);
+		return err;
+	}
+
+The v4l2_ctrl_new_std function returns the v4l2_ctrl pointer to the new
+control, but if you do not need to access the pointer outside the control ops,
+then there is no need to store it.
+
+The v4l2_ctrl_new_std function will fill in most fields based on the control
+ID except for the min, max, step and default values. These are passed in the
+last four arguments. These values are driver specific while control attributes
+like type, name, flags are all global. The control's current value will be set
+to the default value.
+
+The v4l2_ctrl_new_std_menu function is very similar but it is used for menu
+controls. There is no min argument since that is always 0 for menu controls,
+and instead of a step there is a skip_mask argument: if bit X is 1, then menu
+item X is skipped.
+
+Note that if something fails, the function will return NULL or an error and
+set ctrl_handler->error to the error code. If ctrl_handler->error was already
+set, then it will just return and do nothing. This is also true for
+v4l2_ctrl_handler_init if it cannot allocate the internal data structure.
+
+This makes it easy to init the handler and just add all controls and only check
+the error code at the end. Saves a lot of repetitive error checking.
+
+It is recommended to add controls in ascending control ID order: it will be
+a bit faster that way.
+
+3) Optionally force initial control setup:
+
+	v4l2_ctrl_handler_setup(&foo->ctrl_handler);
+
+This will call s_ctrl for all controls unconditionally. Effectively this
+initializes the hardware to the default control values. It is recommended
+that you do this as this ensures that both the internal data structures and
+the hardware are in sync.
+
+4) Finally: implement the v4l2_ctrl_ops
+
+	static const struct v4l2_ctrl_ops foo_ctrl_ops = {
+		.s_ctrl = foo_s_ctrl,
+	};
+
+Usually all you need is s_ctrl:
+
+	static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+	{
+		struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+		switch (ctrl->id) {
+		case V4L2_CID_BRIGHTNESS:
+			write_reg(0x123, ctrl->val);
+			break;
+		case V4L2_CID_CONTRAST:
+			write_reg(0x456, ctrl->val);
+			break;
+		}
+		return 0;
+	}
+
+The control ops are called with the v4l2_ctrl pointer as argument.
+The new control value has already been validated, so all you need to do is
+to actually update the hardware registers.
+
+You're done! And this is sufficient for most of the drivers we have. No need
+to do any validation of control values, or implement QUERYCTRL/QUERYMENU. And
+G/S_CTRL as well as G/TRY/S_EXT_CTRLS are automatically supported.
+
+
+==============================================================================
+
+The remainder of this document deals with more advanced topics and scenarios.
+In practice the basic usage as described above is sufficient for most drivers.
+
+===============================================================================
+
+
+Inheriting Controls
+===================
+
+When a sub-device is registered with a V4L2 driver by calling
+v4l2_device_register_subdev() and the ctrl_handler fields of both v4l2_subdev
+and v4l2_device are set, then the controls of the subdev will become
+automatically available in the V4L2 driver as well. If the subdev driver
+contains controls that already exist in the V4L2 driver, then those will be
+skipped (so a V4L2 driver can always override a subdev control).
+
+What happens here is that v4l2_device_register_subdev() calls
+v4l2_ctrl_add_handler() adding the controls of the subdev to the controls
+of v4l2_device.
+
+
+Accessing Control Values
+========================
+
+The v4l2_ctrl struct contains these two unions:
+
+	/* The current control value. */
+	union {
+		s32 val;
+		s64 val64;
+		char *string;
+	} cur;
+
+	/* The new control value. */
+	union {
+		s32 val;
+		s64 val64;
+		char *string;
+	};
+
+Within the control ops you can freely use these. The val and val64 speak for
+themselves. The string pointers point to character buffers of length
+ctrl->maximum + 1, and are always 0-terminated.
+
+In most cases 'cur' contains the current cached control value. When you create
+a new control this value is made identical to the default value. After calling
+v4l2_ctrl_handler_setup() this value is passed to the hardware. It is generally
+a good idea to call this function.
+
+Whenever a new value is set that new value is automatically cached. This means
+that most drivers do not need to implement the g_volatile_ctrl() op. The
+exception is for controls that return a volatile register such as a signal
+strength read-out that changes continuously. In that case you will need to
+implement g_volatile_ctrl like this:
+
+	static int foo_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+	{
+		switch (ctrl->id) {
+		case V4L2_CID_BRIGHTNESS:
+			ctrl->cur.val = read_reg(0x123);
+			break;
+		}
+	}
+
+The 'new value' union is not used in g_volatile_ctrl. In general controls
+that need to implement g_volatile_ctrl are read-only controls.
+
+To mark a control as volatile you have to set the is_volatile flag:
+
+	ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
+	if (ctrl)
+		ctrl->is_volatile = 1;
+
+For try/s_ctrl the new values (i.e. as passed by the user) are filled in and
+you can modify them in try_ctrl or set them in s_ctrl. The 'cur' union
+contains the current value, which you can use (but not change!) as well.
+
+If s_ctrl returns 0 (OK), then the control framework will copy the new final
+values to the 'cur' union.
+
+While in g_volatile/s/try_ctrl you can access the value of all controls owned
+by the same handler since the handler's lock is held. If you need to access
+the value of controls owned by other handlers, then you have to be very careful
+not to introduce deadlocks.
+
+Outside of the control ops you have to go through to helper functions to get
+or set a single control value safely in your driver:
+
+	s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
+	int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
+
+These functions go through the control framework just as VIDIOC_G/S_CTRL ioctls
+do. Don't use these inside the control ops g_volatile/s/try_ctrl, though, that
+will result in a deadlock since these helpers lock the handler as well.
+
+You can also take the handler lock yourself:
+
+	mutex_lock(&state->ctrl_handler.lock);
+	printk(KERN_INFO "String value is '%s'\n", ctrl1->cur.string);
+	printk(KERN_INFO "Integer value is '%s'\n", ctrl2->cur.val);
+	mutex_unlock(&state->ctrl_handler.lock);
+
+
+Menu Controls
+=============
+
+The v4l2_ctrl struct contains this union:
+
+	union {
+		u32 step;
+		u32 menu_skip_mask;
+	};
+
+For menu controls menu_skip_mask is used. What it does is that it allows you
+to easily exclude certain menu items. This is used in the VIDIOC_QUERYMENU
+implementation where you can return -EINVAL if a certain menu item is not
+present. Note that VIDIOC_QUERYCTRL always returns a step value of 1 for
+menu controls.
+
+A good example is the MPEG Audio Layer II Bitrate menu control where the
+menu is a list of standardized possible bitrates. But in practice hardware
+implementations will only support a subset of those. By setting the skip
+mask you can tell the framework which menu items should be skipped. Setting
+it to 0 means that all menu items are supported.
+
+You set this mask either through the v4l2_ctrl_config struct for a custom
+control, or by calling v4l2_ctrl_new_std_menu().
+
+
+Custom Controls
+===============
+
+Driver specific controls can be created using v4l2_ctrl_new_custom():
+
+	static const struct v4l2_ctrl_config ctrl_filter = {
+		.ops = &ctrl_custom_ops,
+		.id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
+		.name = "Spatial Filter",
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.flags = V4L2_CTRL_FLAG_SLIDER,
+		.max = 15,
+		.step = 1,
+	};
+
+	ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_filter, NULL);
+
+The last argument is the priv pointer which can be set to driver-specific
+private data.
+
+The v4l2_ctrl_config struct also has fields to set the is_private and is_volatile
+flags.
+
+If the name field is not set, then the framework will assume this is a standard
+control and will fill in the name, type and flags fields accordingly.
+
+
+Active and Grabbed Controls
+===========================
+
+If you get more complex relationships between controls, then you may have to
+activate and deactivate controls. For example, if the Chroma AGC control is
+on, then the Chroma Gain control is inactive. That is, you may set it, but
+the value will not be used by the hardware as long as the automatic gain
+control is on. Typically user interfaces can disable such input fields.
+
+You can set the 'active' status using v4l2_ctrl_activate(). By default all
+controls are active. Note that the framework does not check for this flag.
+It is meant purely for GUIs. The function is typically called from within
+s_ctrl.
+
+The other flag is the 'grabbed' flag. A grabbed control means that you cannot
+change it because it is in use by some resource. Typical examples are MPEG
+bitrate controls that cannot be changed while capturing is in progress.
+
+If a control is set to 'grabbed' using v4l2_ctrl_grab(), then the framework
+will return -EBUSY if an attempt is made to set this control. The
+v4l2_ctrl_grab() function is typically called from the driver when it
+starts or stops streaming.
+
+
+Control Clusters
+================
+
+By default all controls are independent from the others. But in more
+complex scenarios you can get dependencies from one control to another.
+In that case you need to 'cluster' them:
+
+	struct foo {
+		struct v4l2_ctrl_handler ctrl_handler;
+#define AUDIO_CL_VOLUME (0)
+#define AUDIO_CL_MUTE   (1)
+		struct v4l2_ctrl *audio_cluster[2];
+		...
+	};
+
+	state->audio_cluster[AUDIO_CL_VOLUME] =
+		v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+	state->audio_cluster[AUDIO_CL_MUTE] =
+		v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+	v4l2_ctrl_cluster(ARRAY_SIZE(state->audio_cluster), state->audio_cluster);
+
+From now on whenever one or more of the controls belonging to the same
+cluster is set (or 'gotten', or 'tried'), only the control ops of the first
+control ('volume' in this example) is called. You effectively create a new
+composite control. Similar to how a 'struct' works in C.
+
+So when s_ctrl is called with V4L2_CID_AUDIO_VOLUME as argument, you should set
+all two controls belonging to the audio_cluster:
+
+	static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+	{
+		struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+		switch (ctrl->id) {
+		case V4L2_CID_AUDIO_VOLUME: {
+			struct v4l2_ctrl *mute = ctrl->cluster[AUDIO_CL_MUTE];
+
+			write_reg(0x123, mute->val ? 0 : ctrl->val);
+			break;
+		}
+		case V4L2_CID_CONTRAST:
+			write_reg(0x456, ctrl->val);
+			break;
+		}
+		return 0;
+	}
+
+In the example above the following are equivalent for the VOLUME case:
+
+	ctrl == ctrl->cluster[AUDIO_CL_VOLUME] == state->audio_cluster[AUDIO_CL_VOLUME]
+	ctrl->cluster[AUDIO_CL_MUTE] == state->audio_cluster[AUDIO_CL_MUTE]
+
+Note that controls in a cluster may be NULL. For example, if for some
+reason mute was never added (because the hardware doesn't support that
+particular feature), then mute will be NULL. So in that case we have a
+cluster of 2 controls, of which only 1 is actually instantiated. The
+only restriction is that the first control of the cluster must always be
+present, since that is the 'master' control of the cluster. The master
+control is the one that identifies the cluster and that provides the
+pointer to the v4l2_ctrl_ops struct that is used for that cluster.
+
+Obviously, all controls in the cluster array must be initialized to either
+a valid control or to NULL.
+
+
+VIDIOC_LOG_STATUS Support
+=========================
+
+This ioctl allow you to dump the current status of a driver to the kernel log.
+The v4l2_ctrl_handler_log_status(ctrl_handler, prefix) can be used to dump the
+value of the controls owned by the given handler to the log. You can supply a
+prefix as well. If the prefix didn't end with a space, then ': ' will be added
+for you.
+
+
+Different Handlers for Different Video Nodes
+============================================
+
+Usually the V4L2 driver has just one control handler that is global for
+all video nodes. But you can also specify different control handlers for
+different video nodes. You can do that by manually setting the ctrl_handler
+field of struct video_device.
+
+That is no problem if there are no subdevs involved but if there are, then
+you need to block the automatic merging of subdev controls to the global
+control handler. You do that by simply setting the ctrl_handler field in
+struct v4l2_device to NULL. Now v4l2_device_register_subdev() will no longer
+merge subdev controls.
+
+After each subdev was added, you will then have to call v4l2_ctrl_add_handler
+manually to add the subdev's control handler (sd->ctrl_handler) to the desired
+control handler. This control handler may be specific to the video_device or
+for a subset of video_device's. For example: the radio device nodes only have
+audio controls, while the video and vbi device nodes share the same control
+handler for the audio and video controls.
+
+If you want to have one handler (e.g. for a radio device node) have a subset
+of another handler (e.g. for a video device node), then you should first add
+the controls to the first handler, add the other controls to the second
+handler and finally add the first handler to the second. For example:
+
+	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_VOLUME, ...);
+	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+	v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler);
+
+Or you can add specific controls to a handler:
+
+	volume = v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_AUDIO_VOLUME, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_BRIGHTNESS, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_CONTRAST, ...);
+	v4l2_ctrl_add_ctrl(&radio_ctrl_handler, volume);
+
+What you should not do is make two identical controls for two handlers.
+For example:
+
+	v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+	v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_AUDIO_MUTE, ...);
+
+This would be bad since muting the radio would not change the video mute
+control. The rule is to have one control for each hardware 'knob' that you
+can twiddle.
+
+
+Finding Controls
+================
+
+Normally you have created the controls yourself and you can store the struct
+v4l2_ctrl pointer into your own struct.
+
+But sometimes you need to find a control from another handler that you do
+not own. For example, if you have to find a volume control from a subdev.
+
+You can do that by calling v4l2_ctrl_find:
+
+	struct v4l2_ctrl *volume;
+
+	volume = v4l2_ctrl_find(sd->ctrl_handler, V4L2_CID_AUDIO_VOLUME);
+
+Since v4l2_ctrl_find will lock the handler you have to be careful where you
+use it. For example, this is not a good idea:
+
+	struct v4l2_ctrl_handler ctrl_handler;
+
+	v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+	v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+
+...and in video_ops.s_ctrl:
+
+	case V4L2_CID_BRIGHTNESS:
+		contrast = v4l2_find_ctrl(&ctrl_handler, V4L2_CID_CONTRAST);
+		...
+
+When s_ctrl is called by the framework the ctrl_handler.lock is already taken, so
+attempting to find another control from the same handler will deadlock.
+
+It is recommended not to use this function from inside the control ops.
+
+
+Inheriting Controls
+===================
+
+When one control handler is added to another using v4l2_ctrl_add_handler, then
+by default all controls from one are merged to the other. But a subdev might
+have low-level controls that make sense for some advanced embedded system, but
+not when it is used in consumer-level hardware. In that case you want to keep
+those low-level controls local to the subdev. You can do this by simply
+setting the 'is_private' flag of the control to 1:
+
+	static const struct v4l2_ctrl_config ctrl_private = {
+		.ops = &ctrl_custom_ops,
+		.id = V4L2_CID_...,
+		.name = "Some Private Control",
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.max = 15,
+		.step = 1,
+		.is_private = 1,
+	};
+
+	ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_private, NULL);
+
+These controls will now be skipped when v4l2_ctrl_add_handler is called.
+
+
+V4L2_CTRL_TYPE_CTRL_CLASS Controls
+==================================
+
+Controls of this type can be used by GUIs to get the name of the control class.
+A fully featured GUI can make a dialog with multiple tabs with each tab
+containing the controls belonging to a particular control class. The name of
+each tab can be found by querying a special control with ID <control class | 1>.
+
+Drivers do not have to care about this. The framework will automatically add
+a control of this type whenever the first control belonging to a new control
+class is added.
+
+
+Differences from the Spec
+=========================
+
+There are a few places where the framework acts slightly differently from the
+V4L2 Specification. Those differences are described in this section. We will
+have to see whether we need to adjust the spec or not.
+
+1) It is no longer required to have all controls contained in a
+v4l2_ext_control array be from the same control class. The framework will be
+able to handle any type of control in the array. You need to set ctrl_class
+to 0 in order to enable this. If ctrl_class is non-zero, then it will still
+check that all controls belong to that control class.
+
+If you set ctrl_class to 0 and count to 0, then it will only return an error
+if there are no controls at all.
+
+2) Clarified the way error_idx works. For get and set it will be equal to
+count if nothing was done yet. If it is less than count then only the controls
+up to error_idx-1 were successfully applied.
+
+3) When attempting to read a button control the framework will return -EACCES
+instead of -EINVAL as stated in the spec. It seems to make more sense since
+button controls are write-only controls.
+
+4) Attempting to write to a read-only control will return -EACCES instead of
+-EINVAL as the spec says.
+
+5) The spec does not mention what should happen when you try to set/get a
+control class controls. ivtv currently returns -EINVAL (indicating that the
+control ID does not exist) while the framework will return -EACCES, which
+makes more sense.
+
+
+Proposals for Extensions
+========================
+
+Some ideas for future extensions to the spec:
+
+1) Add a V4L2_CTRL_FLAG_HEX to have values shown as hexadecimal instead of
+decimal. Useful for e.g. video_mute_yuv.
+
+2) It is possible to mark in the controls array which controls have been
+successfully written and which failed by for example adding a bit to the
+control ID. Not sure if it is worth the effort, though.
+
+3) Trying to set volatile inactive controls should result in -EACCESS.
+
+4) Add a new flag to mark volatile controls. Any application that wants
+to store the state of the controls can then skip volatile inactive controls.
+Currently it is not possible to detect such controls.
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index e831aaca66f8..f22f35c271f3 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -44,8 +44,8 @@ All drivers have the following structure:
 
 2) A way of initializing and commanding sub-devices (if any).
 
-3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX, /dev/radioX and
-   /dev/vtxX) and keeping track of device-node specific data.
+3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX and /dev/radioX)
+   and keeping track of device-node specific data.
 
 4) Filehandle-specific structs containing per-filehandle data;
 
@@ -192,6 +192,11 @@ You also need a way to go from the low-level struct to v4l2_subdev. For the
 common i2c_client struct the i2c_set_clientdata() call is used to store a
 v4l2_subdev pointer, for other busses you may have to use other methods.
 
+Bridges might also need to store per-subdev private data, such as a pointer to
+bridge-specific per-subdev private data. The v4l2_subdev structure provides
+host private data for that purpose that can be accessed with
+v4l2_get_subdev_hostdata() and v4l2_set_subdev_hostdata().
+
 From the bridge driver perspective you load the sub-device module and somehow
 obtain the v4l2_subdev pointer. For i2c devices this is easy: you call
 i2c_get_clientdata(). For other busses something similar needs to be done.
@@ -448,6 +453,10 @@ You should also set these fields:
 - ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance
   (highly recommended to use this and it might become compulsory in the
   future!), then set this to your v4l2_ioctl_ops struct.
+- lock: leave to NULL if you want to do all the locking in the driver.
+  Otherwise you give it a pointer to a struct mutex_lock and before any
+  of the v4l2_file_operations is called this lock will be taken by the
+  core and released afterwards.
 - parent: you only set this if v4l2_device was registered with NULL as
   the parent device struct. This only happens in cases where one hardware
   device has multiple PCI devices that all share the same v4l2_device core.
@@ -464,6 +473,22 @@ If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or
 The v4l2_file_operations struct is a subset of file_operations. The main
 difference is that the inode argument is omitted since it is never used.
 
+v4l2_file_operations and locking
+--------------------------------
+
+You can set a pointer to a mutex_lock in struct video_device. Usually this
+will be either a top-level mutex or a mutex per device node. If you want
+finer-grained locking then you have to set it to NULL and do you own locking.
+
+If a lock is specified then all file operations will be serialized on that
+lock. If you use videobuf then you must pass the same lock to the videobuf
+queue initialize function: if videobuf has to wait for a frame to arrive, then
+it will temporarily unlock the lock and relock it afterwards. If your driver
+also waits in the code, then you should do the same to allow other processes
+to access the device node while the first process is waiting for something.
+
+The implementation of a hotplug disconnect should also take the lock before
+calling v4l2_device_disconnect.
 
 video_device registration
 -------------------------
@@ -483,7 +508,6 @@ types exist:
 VFL_TYPE_GRABBER: videoX for video input/output devices
 VFL_TYPE_VBI: vbiX for vertical blank data (i.e. closed captions, teletext)
 VFL_TYPE_RADIO: radioX for radio tuners
-VFL_TYPE_VTX: vtxX for teletext devices (deprecated, don't use)
 
 The last argument gives you a certain amount of control over the device
 device node number used (i.e. the X in videoX). Normally you will pass -1
@@ -547,9 +571,8 @@ from /dev).
 
 After video_unregister_device() returns no new opens can be done. However,
 in the case of USB devices some application might still have one of these
-device nodes open. So after the unregister all file operations will return
-an error as well, except for the ioctl and unlocked_ioctl file operations:
-those will still be passed on since some buffer ioctls may still be needed.
+device nodes open. So after the unregister all file operations (except
+release, of course) will return an error as well.
 
 When the last user of the video device node exits, then the vdev->release()
 callback is called and you can do the final cleanup there.
diff --git a/Documentation/video4linux/w9966.txt b/Documentation/video4linux/w9966.txt
index 78a651254b84..855024525fd2 100644
--- a/Documentation/video4linux/w9966.txt
+++ b/Documentation/video4linux/w9966.txt
@@ -24,7 +24,7 @@ where every two pixels take 4 bytes. In SDL (www.libsdl.org) this format
 is called VIDEO_PALETTE_YUV422 (16 bpp).
 
 A minimal test application (with source) is available from:
-  http://hem.fyristorg.com/mogul/w9966.html
+  http://www.slackwaresupport.com/howtos/Webcam-HOWTO
 
 The slow framerate is due to missing DMA ECP read support in the
 parport drivers. I might add working EPP support later.
diff --git a/Documentation/vm/highmem.txt b/Documentation/vm/highmem.txt
new file mode 100644
index 000000000000..4324d24ffacd
--- /dev/null
+++ b/Documentation/vm/highmem.txt
@@ -0,0 +1,162 @@
+
+			     ====================
+			     HIGH MEMORY HANDLING
+			     ====================
+
+By: Peter Zijlstra <a.p.zijlstra@chello.nl>
+
+Contents:
+
+ (*) What is high memory?
+
+ (*) Temporary virtual mappings.
+
+ (*) Using kmap_atomic.
+
+ (*) Cost of temporary mappings.
+
+ (*) i386 PAE.
+
+
+====================
+WHAT IS HIGH MEMORY?
+====================
+
+High memory (highmem) is used when the size of physical memory approaches or
+exceeds the maximum size of virtual memory.  At that point it becomes
+impossible for the kernel to keep all of the available physical memory mapped
+at all times.  This means the kernel needs to start using temporary mappings of
+the pieces of physical memory that it wants to access.
+
+The part of (physical) memory not covered by a permanent mapping is what we
+refer to as 'highmem'.  There are various architecture dependent constraints on
+where exactly that border lies.
+
+In the i386 arch, for example, we choose to map the kernel into every process's
+VM space so that we don't have to pay the full TLB invalidation costs for
+kernel entry/exit.  This means the available virtual memory space (4GiB on
+i386) has to be divided between user and kernel space.
+
+The traditional split for architectures using this approach is 3:1, 3GiB for
+userspace and the top 1GiB for kernel space:
+
+		+--------+ 0xffffffff
+		| Kernel |
+		+--------+ 0xc0000000
+		|        |
+		| User   |
+		|        |
+		+--------+ 0x00000000
+
+This means that the kernel can at most map 1GiB of physical memory at any one
+time, but because we need virtual address space for other things - including
+temporary maps to access the rest of the physical memory - the actual direct
+map will typically be less (usually around ~896MiB).
+
+Other architectures that have mm context tagged TLBs can have separate kernel
+and user maps.  Some hardware (like some ARMs), however, have limited virtual
+space when they use mm context tags.
+
+
+==========================
+TEMPORARY VIRTUAL MAPPINGS
+==========================
+
+The kernel contains several ways of creating temporary mappings:
+
+ (*) vmap().  This can be used to make a long duration mapping of multiple
+     physical pages into a contiguous virtual space.  It needs global
+     synchronization to unmap.
+
+ (*) kmap().  This permits a short duration mapping of a single page.  It needs
+     global synchronization, but is amortized somewhat.  It is also prone to
+     deadlocks when using in a nested fashion, and so it is not recommended for
+     new code.
+
+ (*) kmap_atomic().  This permits a very short duration mapping of a single
+     page.  Since the mapping is restricted to the CPU that issued it, it
+     performs well, but the issuing task is therefore required to stay on that
+     CPU until it has finished, lest some other task displace its mappings.
+
+     kmap_atomic() may also be used by interrupt contexts, since it is does not
+     sleep and the caller may not sleep until after kunmap_atomic() is called.
+
+     It may be assumed that k[un]map_atomic() won't fail.
+
+
+=================
+USING KMAP_ATOMIC
+=================
+
+When and where to use kmap_atomic() is straightforward.  It is used when code
+wants to access the contents of a page that might be allocated from high memory
+(see __GFP_HIGHMEM), for example a page in the pagecache.  The API has two
+functions, and they can be used in a manner similar to the following:
+
+	/* Find the page of interest. */
+	struct page *page = find_get_page(mapping, offset);
+
+	/* Gain access to the contents of that page. */
+	void *vaddr = kmap_atomic(page);
+
+	/* Do something to the contents of that page. */
+	memset(vaddr, 0, PAGE_SIZE);
+
+	/* Unmap that page. */
+	kunmap_atomic(vaddr);
+
+Note that the kunmap_atomic() call takes the result of the kmap_atomic() call
+not the argument.
+
+If you need to map two pages because you want to copy from one page to
+another you need to keep the kmap_atomic calls strictly nested, like:
+
+	vaddr1 = kmap_atomic(page1);
+	vaddr2 = kmap_atomic(page2);
+
+	memcpy(vaddr1, vaddr2, PAGE_SIZE);
+
+	kunmap_atomic(vaddr2);
+	kunmap_atomic(vaddr1);
+
+
+==========================
+COST OF TEMPORARY MAPPINGS
+==========================
+
+The cost of creating temporary mappings can be quite high.  The arch has to
+manipulate the kernel's page tables, the data TLB and/or the MMU's registers.
+
+If CONFIG_HIGHMEM is not set, then the kernel will try and create a mapping
+simply with a bit of arithmetic that will convert the page struct address into
+a pointer to the page contents rather than juggling mappings about.  In such a
+case, the unmap operation may be a null operation.
+
+If CONFIG_MMU is not set, then there can be no temporary mappings and no
+highmem.  In such a case, the arithmetic approach will also be used.
+
+
+========
+i386 PAE
+========
+
+The i386 arch, under some circumstances, will permit you to stick up to 64GiB
+of RAM into your 32-bit machine.  This has a number of consequences:
+
+ (*) Linux needs a page-frame structure for each page in the system and the
+     pageframes need to live in the permanent mapping, which means:
+
+ (*) you can have 896M/sizeof(struct page) page-frames at most; with struct
+     page being 32-bytes that would end up being something in the order of 112G
+     worth of pages; the kernel, however, needs to store more than just
+     page-frames in that memory...
+
+ (*) PAE makes your page tables larger - which slows the system down as more
+     data has to be accessed to traverse in TLB fills and the like.  One
+     advantage is that PAE has more PTE bits and can provide advanced features
+     like NX and PAT.
+
+The general recommendation is that you don't use more than 8GiB on a 32-bit
+machine - although more might work for you and your workload, you're pretty
+much on your own - don't expect kernel developers to really care much if things
+come apart.
diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt
index 6690fc34ef6d..4e7da6543424 100644
--- a/Documentation/vm/numa_memory_policy.txt
+++ b/Documentation/vm/numa_memory_policy.txt
@@ -424,7 +424,7 @@ a command line tool, numactl(8), exists that allows one to:
 
 + set the shared policy for a shared memory segment via mbind(2)
 
-The numactl(8) tool is packages with the run-time version of the library
+The numactl(8) tool is packaged with the run-time version of the library
 containing the memory policy system call wrappers.  Some distributions
 package the headers and compile-time libraries in a separate development
 package.
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
index 66e9358e2144..cc96ee2666f2 100644
--- a/Documentation/vm/page-types.c
+++ b/Documentation/vm/page-types.c
@@ -478,7 +478,7 @@ static void prepare_hwpoison_fd(void)
 	}
 
 	if (opt_unpoison && !hwpoison_forget_fd) {
-		sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+		sprintf(buf, "%s/unpoison-pfn", hwpoison_debug_fs);
 		hwpoison_forget_fd = checked_open(buf, O_WRONLY);
 	}
 }
@@ -694,7 +694,7 @@ static void usage(void)
 #endif
 "            -l|--list                  Show page details in ranges\n"
 "            -L|--list-each             Show page details one by one\n"
-"            -N|--no-summary            Don't show summay info\n"
+"            -N|--no-summary            Don't show summary info\n"
 "            -X|--hwpoison              hwpoison pages\n"
 "            -x|--unpoison              unpoison pages\n"
 "            -h|--help                  Show this usage message\n"
diff --git a/Documentation/w1/masters/ds2482 b/Documentation/w1/masters/ds2482
index 299b91c7609f..56f8edace6ac 100644
--- a/Documentation/w1/masters/ds2482
+++ b/Documentation/w1/masters/ds2482
@@ -6,8 +6,8 @@ Supported chips:
     Prefix: 'ds2482'
     Addresses scanned: None
     Datasheets:
-        http://pdfserv.maxim-ic.com/en/ds/DS2482-100-DS2482S-100.pdf
-        http://pdfserv.maxim-ic.com/en/ds/DS2482-800-DS2482S-800.pdf
+        http://datasheets.maxim-ic.com/en/ds/DS2482-100.pdf
+        http://datasheets.maxim-ic.com/en/ds/DS2482-800.pdf
 
 Author: Ben Gardner <bgardner@wabtec.com>
 
diff --git a/Documentation/w1/masters/mxc-w1 b/Documentation/w1/masters/mxc-w1
index 97f6199a7f39..38be1ad65532 100644
--- a/Documentation/w1/masters/mxc-w1
+++ b/Documentation/w1/masters/mxc-w1
@@ -5,7 +5,8 @@ Supported chips:
   * Freescale MX27, MX31 and probably other i.MX SoCs
     Datasheets:
         http://www.freescale.com/files/32bit/doc/data_sheet/MCIMX31.pdf?fpsp=1
-	http://www.freescale.com/files/dsp/MCIMX27.pdf?fpsp=1
+	http://cache.freescale.com/files/dsp/doc/archive/MCIMX27.pdf?fsrch=1&WT_TYPE=
+	Data%20Sheets&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=pdf&WT_ASSET=Documentation
 
 Author: Originally based on Freescale code, prepared for mainline by
 	Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/Documentation/w1/masters/omap-hdq b/Documentation/w1/masters/omap-hdq
index ca722e09b6a1..884dc284b215 100644
--- a/Documentation/w1/masters/omap-hdq
+++ b/Documentation/w1/masters/omap-hdq
@@ -7,7 +7,7 @@ Supported chips:
 
 A useful link about HDQ basics:
 ===============================
-http://focus.ti.com/lit/an/slua408/slua408.pdf
+http://focus.ti.com/lit/an/slua408a/slua408a.pdf
 
 Description:
 ============
diff --git a/Documentation/workqueue.txt b/Documentation/workqueue.txt
new file mode 100644
index 000000000000..996a27d9b8db
--- /dev/null
+++ b/Documentation/workqueue.txt
@@ -0,0 +1,381 @@
+
+Concurrency Managed Workqueue (cmwq)
+
+September, 2010		Tejun Heo <tj@kernel.org>
+			Florian Mickler <florian@mickler.org>
+
+CONTENTS
+
+1. Introduction
+2. Why cmwq?
+3. The Design
+4. Application Programming Interface (API)
+5. Example Execution Scenarios
+6. Guidelines
+
+
+1. Introduction
+
+There are many cases where an asynchronous process execution context
+is needed and the workqueue (wq) API is the most commonly used
+mechanism for such cases.
+
+When such an asynchronous execution context is needed, a work item
+describing which function to execute is put on a queue.  An
+independent thread serves as the asynchronous execution context.  The
+queue is called workqueue and the thread is called worker.
+
+While there are work items on the workqueue the worker executes the
+functions associated with the work items one after the other.  When
+there is no work item left on the workqueue the worker becomes idle.
+When a new work item gets queued, the worker begins executing again.
+
+
+2. Why cmwq?
+
+In the original wq implementation, a multi threaded (MT) wq had one
+worker thread per CPU and a single threaded (ST) wq had one worker
+thread system-wide.  A single MT wq needed to keep around the same
+number of workers as the number of CPUs.  The kernel grew a lot of MT
+wq users over the years and with the number of CPU cores continuously
+rising, some systems saturated the default 32k PID space just booting
+up.
+
+Although MT wq wasted a lot of resource, the level of concurrency
+provided was unsatisfactory.  The limitation was common to both ST and
+MT wq albeit less severe on MT.  Each wq maintained its own separate
+worker pool.  A MT wq could provide only one execution context per CPU
+while a ST wq one for the whole system.  Work items had to compete for
+those very limited execution contexts leading to various problems
+including proneness to deadlocks around the single execution context.
+
+The tension between the provided level of concurrency and resource
+usage also forced its users to make unnecessary tradeoffs like libata
+choosing to use ST wq for polling PIOs and accepting an unnecessary
+limitation that no two polling PIOs can progress at the same time.  As
+MT wq don't provide much better concurrency, users which require
+higher level of concurrency, like async or fscache, had to implement
+their own thread pool.
+
+Concurrency Managed Workqueue (cmwq) is a reimplementation of wq with
+focus on the following goals.
+
+* Maintain compatibility with the original workqueue API.
+
+* Use per-CPU unified worker pools shared by all wq to provide
+  flexible level of concurrency on demand without wasting a lot of
+  resource.
+
+* Automatically regulate worker pool and level of concurrency so that
+  the API users don't need to worry about such details.
+
+
+3. The Design
+
+In order to ease the asynchronous execution of functions a new
+abstraction, the work item, is introduced.
+
+A work item is a simple struct that holds a pointer to the function
+that is to be executed asynchronously.  Whenever a driver or subsystem
+wants a function to be executed asynchronously it has to set up a work
+item pointing to that function and queue that work item on a
+workqueue.
+
+Special purpose threads, called worker threads, execute the functions
+off of the queue, one after the other.  If no work is queued, the
+worker threads become idle.  These worker threads are managed in so
+called thread-pools.
+
+The cmwq design differentiates between the user-facing workqueues that
+subsystems and drivers queue work items on and the backend mechanism
+which manages thread-pool and processes the queued work items.
+
+The backend is called gcwq.  There is one gcwq for each possible CPU
+and one gcwq to serve work items queued on unbound workqueues.
+
+Subsystems and drivers can create and queue work items through special
+workqueue API functions as they see fit. They can influence some
+aspects of the way the work items are executed by setting flags on the
+workqueue they are putting the work item on. These flags include
+things like CPU locality, reentrancy, concurrency limits and more. To
+get a detailed overview refer to the API description of
+alloc_workqueue() below.
+
+When a work item is queued to a workqueue, the target gcwq is
+determined according to the queue parameters and workqueue attributes
+and appended on the shared worklist of the gcwq.  For example, unless
+specifically overridden, a work item of a bound workqueue will be
+queued on the worklist of exactly that gcwq that is associated to the
+CPU the issuer is running on.
+
+For any worker pool implementation, managing the concurrency level
+(how many execution contexts are active) is an important issue.  cmwq
+tries to keep the concurrency at a minimal but sufficient level.
+Minimal to save resources and sufficient in that the system is used at
+its full capacity.
+
+Each gcwq bound to an actual CPU implements concurrency management by
+hooking into the scheduler.  The gcwq is notified whenever an active
+worker wakes up or sleeps and keeps track of the number of the
+currently runnable workers.  Generally, work items are not expected to
+hog a CPU and consume many cycles.  That means maintaining just enough
+concurrency to prevent work processing from stalling should be
+optimal.  As long as there are one or more runnable workers on the
+CPU, the gcwq doesn't start execution of a new work, but, when the
+last running worker goes to sleep, it immediately schedules a new
+worker so that the CPU doesn't sit idle while there are pending work
+items.  This allows using a minimal number of workers without losing
+execution bandwidth.
+
+Keeping idle workers around doesn't cost other than the memory space
+for kthreads, so cmwq holds onto idle ones for a while before killing
+them.
+
+For an unbound wq, the above concurrency management doesn't apply and
+the gcwq for the pseudo unbound CPU tries to start executing all work
+items as soon as possible.  The responsibility of regulating
+concurrency level is on the users.  There is also a flag to mark a
+bound wq to ignore the concurrency management.  Please refer to the
+API section for details.
+
+Forward progress guarantee relies on that workers can be created when
+more execution contexts are necessary, which in turn is guaranteed
+through the use of rescue workers.  All work items which might be used
+on code paths that handle memory reclaim are required to be queued on
+wq's that have a rescue-worker reserved for execution under memory
+pressure.  Else it is possible that the thread-pool deadlocks waiting
+for execution contexts to free up.
+
+
+4. Application Programming Interface (API)
+
+alloc_workqueue() allocates a wq.  The original create_*workqueue()
+functions are deprecated and scheduled for removal.  alloc_workqueue()
+takes three arguments - @name, @flags and @max_active.  @name is the
+name of the wq and also used as the name of the rescuer thread if
+there is one.
+
+A wq no longer manages execution resources but serves as a domain for
+forward progress guarantee, flush and work item attributes.  @flags
+and @max_active control how work items are assigned execution
+resources, scheduled and executed.
+
+@flags:
+
+  WQ_NON_REENTRANT
+
+	By default, a wq guarantees non-reentrance only on the same
+	CPU.  A work item may not be executed concurrently on the same
+	CPU by multiple workers but is allowed to be executed
+	concurrently on multiple CPUs.  This flag makes sure
+	non-reentrance is enforced across all CPUs.  Work items queued
+	to a non-reentrant wq are guaranteed to be executed by at most
+	one worker system-wide at any given time.
+
+  WQ_UNBOUND
+
+	Work items queued to an unbound wq are served by a special
+	gcwq which hosts workers which are not bound to any specific
+	CPU.  This makes the wq behave as a simple execution context
+	provider without concurrency management.  The unbound gcwq
+	tries to start execution of work items as soon as possible.
+	Unbound wq sacrifices locality but is useful for the following
+	cases.
+
+	* Wide fluctuation in the concurrency level requirement is
+	  expected and using bound wq may end up creating large number
+	  of mostly unused workers across different CPUs as the issuer
+	  hops through different CPUs.
+
+	* Long running CPU intensive workloads which can be better
+	  managed by the system scheduler.
+
+  WQ_FREEZEABLE
+
+	A freezeable wq participates in the freeze phase of the system
+	suspend operations.  Work items on the wq are drained and no
+	new work item starts execution until thawed.
+
+  WQ_MEM_RECLAIM
+
+	All wq which might be used in the memory reclaim paths _MUST_
+	have this flag set.  The wq is guaranteed to have at least one
+	execution context regardless of memory pressure.
+
+  WQ_HIGHPRI
+
+	Work items of a highpri wq are queued at the head of the
+	worklist of the target gcwq and start execution regardless of
+	the current concurrency level.  In other words, highpri work
+	items will always start execution as soon as execution
+	resource is available.
+
+	Ordering among highpri work items is preserved - a highpri
+	work item queued after another highpri work item will start
+	execution after the earlier highpri work item starts.
+
+	Although highpri work items are not held back by other
+	runnable work items, they still contribute to the concurrency
+	level.  Highpri work items in runnable state will prevent
+	non-highpri work items from starting execution.
+
+	This flag is meaningless for unbound wq.
+
+  WQ_CPU_INTENSIVE
+
+	Work items of a CPU intensive wq do not contribute to the
+	concurrency level.  In other words, runnable CPU intensive
+	work items will not prevent other work items from starting
+	execution.  This is useful for bound work items which are
+	expected to hog CPU cycles so that their execution is
+	regulated by the system scheduler.
+
+	Although CPU intensive work items don't contribute to the
+	concurrency level, start of their executions is still
+	regulated by the concurrency management and runnable
+	non-CPU-intensive work items can delay execution of CPU
+	intensive work items.
+
+	This flag is meaningless for unbound wq.
+
+  WQ_HIGHPRI | WQ_CPU_INTENSIVE
+
+	This combination makes the wq avoid interaction with
+	concurrency management completely and behave as a simple
+	per-CPU execution context provider.  Work items queued on a
+	highpri CPU-intensive wq start execution as soon as resources
+	are available and don't affect execution of other work items.
+
+@max_active:
+
+@max_active determines the maximum number of execution contexts per
+CPU which can be assigned to the work items of a wq.  For example,
+with @max_active of 16, at most 16 work items of the wq can be
+executing at the same time per CPU.
+
+Currently, for a bound wq, the maximum limit for @max_active is 512
+and the default value used when 0 is specified is 256.  For an unbound
+wq, the limit is higher of 512 and 4 * num_possible_cpus().  These
+values are chosen sufficiently high such that they are not the
+limiting factor while providing protection in runaway cases.
+
+The number of active work items of a wq is usually regulated by the
+users of the wq, more specifically, by how many work items the users
+may queue at the same time.  Unless there is a specific need for
+throttling the number of active work items, specifying '0' is
+recommended.
+
+Some users depend on the strict execution ordering of ST wq.  The
+combination of @max_active of 1 and WQ_UNBOUND is used to achieve this
+behavior.  Work items on such wq are always queued to the unbound gcwq
+and only one work item can be active at any given time thus achieving
+the same ordering property as ST wq.
+
+
+5. Example Execution Scenarios
+
+The following example execution scenarios try to illustrate how cmwq
+behave under different configurations.
+
+ Work items w0, w1, w2 are queued to a bound wq q0 on the same CPU.
+ w0 burns CPU for 5ms then sleeps for 10ms then burns CPU for 5ms
+ again before finishing.  w1 and w2 burn CPU for 5ms then sleep for
+ 10ms.
+
+Ignoring all other tasks, works and processing overhead, and assuming
+simple FIFO scheduling, the following is one highly simplified version
+of possible sequences of events with the original wq.
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 starts and burns CPU
+ 25		w1 sleeps
+ 35		w1 wakes up and finishes
+ 35		w2 starts and burns CPU
+ 40		w2 sleeps
+ 50		w2 wakes up and finishes
+
+And with cmwq with @max_active >= 3,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 starts and burns CPU
+ 10		w1 sleeps
+ 10		w2 starts and burns CPU
+ 15		w2 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 25		w2 wakes up and finishes
+
+If @max_active == 2,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 starts and burns CPU
+ 10		w1 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 20		w2 starts and burns CPU
+ 25		w2 sleeps
+ 35		w2 wakes up and finishes
+
+Now, let's assume w1 and w2 are queued to a different wq q1 which has
+WQ_HIGHPRI set,
+
+ TIME IN MSECS	EVENT
+ 0		w1 and w2 start and burn CPU
+ 5		w1 sleeps
+ 10		w2 sleeps
+ 10		w0 starts and burns CPU
+ 15		w0 sleeps
+ 15		w1 wakes up and finishes
+ 20		w2 wakes up and finishes
+ 25		w0 wakes up and burns CPU
+ 30		w0 finishes
+
+If q1 has WQ_CPU_INTENSIVE set,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 and w2 start and burn CPU
+ 10		w1 sleeps
+ 15		w2 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 25		w2 wakes up and finishes
+
+
+6. Guidelines
+
+* Do not forget to use WQ_MEM_RECLAIM if a wq may process work items
+  which are used during memory reclaim.  Each wq with WQ_MEM_RECLAIM
+  set has an execution context reserved for it.  If there is
+  dependency among multiple work items used during memory reclaim,
+  they should be queued to separate wq each with WQ_MEM_RECLAIM.
+
+* Unless strict ordering is required, there is no need to use ST wq.
+
+* Unless there is a specific need, using 0 for @max_active is
+  recommended.  In most use cases, concurrency level usually stays
+  well under the default limit.
+
+* A wq serves as a domain for forward progress guarantee
+  (WQ_MEM_RECLAIM, flush and work item attributes.  Work items which
+  are not involved in memory reclaim and don't need to be flushed as a
+  part of a group of work items, and don't require any special
+  attribute, can use one of the system wq.  There is no difference in
+  execution characteristics between using a dedicated wq and a system
+  wq.
+
+* Unless work items are expected to consume a huge amount of CPU
+  cycles, using a bound wq is usually beneficial due to the increased
+  level of locality in wq operations and work item execution.
diff --git a/Documentation/x86/x86_64/kernel-stacks b/Documentation/x86/x86_64/kernel-stacks
index 5ad65d51fb95..a01eec5d1d0b 100644
--- a/Documentation/x86/x86_64/kernel-stacks
+++ b/Documentation/x86/x86_64/kernel-stacks
@@ -18,9 +18,9 @@ specialized stacks contain no useful data.  The main CPU stacks are:
   Used for external hardware interrupts.  If this is the first external
   hardware interrupt (i.e. not a nested hardware interrupt) then the
   kernel switches from the current task to the interrupt stack.  Like
-  the split thread and interrupt stacks on i386 (with CONFIG_4KSTACKS),
-  this gives more room for kernel interrupt processing without having
-  to increase the size of every per thread stack.
+  the split thread and interrupt stacks on i386, this gives more room
+  for kernel interrupt processing without having to increase the size
+  of every per thread stack.
 
   The interrupt stack is also used when processing a softirq.
 
diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
index feb37e177010..cf5437deda81 100644
--- a/Documentation/x86/zero-page.txt
+++ b/Documentation/x86/zero-page.txt
@@ -18,6 +18,7 @@ Offset	Proto	Name		Meaning
 080/010	ALL	hd0_info	hd0 disk parameter, OBSOLETE!!
 090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
 0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
+0B0/010	ALL	olpc_ofw_header	OLPC's OpenFirmware CIF and friends
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
 1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO
index 3d80e8af36ec..69160779e432 100644
--- a/Documentation/zh_CN/HOWTO
+++ b/Documentation/zh_CN/HOWTO
@@ -112,7 +112,7 @@ Linux内核代码中包含有大量的文档。这些文档对于学习如何与
 
     其他关于如何正确地生成补丁的优秀文档包括：
     "The Perfect Patch"
-        http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+        http://userweb.kernel.org/~akpm/stuff/tpp.txt
     "Linux kernel patch submission format"
         http://linux.yyz.us/patch-format.html
 
@@ -168,7 +168,7 @@ Linux内核代码中包含有大量的文档。这些文档对于学习如何与
 
 如果你想加入内核开发社区并协助完成一些任务，却找不到从哪里开始，可以访问
 “Linux内核房管员”计划：
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors
 这是极佳的起点。它提供一个相对简单的任务列表，列出内核代码中需要被重新
 整理或者改正的地方。通过和负责这个计划的开发者们一同工作，你会学到将补丁
 集成进内核的基本原理。如果还没有决定下一步要做什么的话，你还可能会得到方
@@ -515,7 +515,7 @@ Linux内核社区并不喜欢一下接收大段的代码。修改需要被恰当
 
 想了解它具体应该看起来像什么，请查阅以下文档中的“ChangeLog”章节：
   “The Perfect Patch”
-      http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+  	 http://userweb.kernel.org/~akpm/stuff/tpp.txt
 
 
 这些事情有时候做起来很难。要在任何方面都做到完美可能需要好几年时间。这是
@@ -525,7 +525,7 @@ Linux内核社区并不喜欢一下接收大段的代码。修改需要被恰当
 
 ---------------
 感谢Paolo Ciarrocchi允许“开发流程”部分基于他所写的文章
-(http://linux.tar.bz/articles/2.6-development_process)，感谢Randy
+(http://www.kerneltravel.net/newbie/2.6-development_process)，感谢Randy
 Dunlap和Gerrit Huizenga完善了应该说和不该说的列表。感谢Pat Mochel, Hanna
 Linder, Randy Dunlap, Kay Sievers, Vojtech Pavlik, Jan Kara, Josh Boyer,
 Kees Cook, Andrew Morton, Andi Kleen, Vadim Lobanov, Jesper Juhl, Adrian
diff --git a/Documentation/zh_CN/SubmittingDrivers b/Documentation/zh_CN/SubmittingDrivers
index 5f4815c63ec7..c27b0f6cdd39 100644
--- a/Documentation/zh_CN/SubmittingDrivers
+++ b/Documentation/zh_CN/SubmittingDrivers
@@ -165,4 +165,4 @@ Linux USB项目：
 	http://www.fenrus.org/how-to-not-write-a-device-driver-paper.pdf
 
 内核清洁工 (Kernel Janitor):
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors
diff --git a/Documentation/zh_CN/SubmittingPatches b/Documentation/zh_CN/SubmittingPatches
index 985c92e20b73..9a1a6e1ed09e 100644
--- a/Documentation/zh_CN/SubmittingPatches
+++ b/Documentation/zh_CN/SubmittingPatches
@@ -83,7 +83,7 @@ Quilt:
 http://savannah.nongnu.org/projects/quilt
 
 Andrew Morton 的补丁脚本:
-http://www.zip.com.au/~akpm/linux/patches/
+http://userweb.kernel.org/~akpm/stuff/patch-scripts.tar.gz
 作为这些脚本的替代，quilt 是值得推荐的补丁管理工具(看上面的链接)。
 
 2)描述你的改动。
@@ -166,7 +166,7 @@ MAITAINERS 文件里的）发送一个手册页（man-pages）补丁，或者至
   人拷贝，只要它是琐碎的）
   任何文件的作者/维护者对该文件的改动（例如 patch monkey 在重传模式下）
 
-URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
+EMAIL: trivial@kernel.org
 
 (译注，关于“琐碎补丁”的一些说明：因为原文的这一部分写得比较简单，所以不得不
 违例写一下译注。"trivial"这个英文单词的本意是“琐碎的，不重要的。”但是在这里
@@ -394,7 +394,7 @@ Static inline 函数相比宏来说，是好得多的选择。Static inline 函�
 ----------------
 
 Andrew Morton, "The perfect patch" (tpp).
-  <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
+  <http://userweb.kernel.org/~akpm/stuff/tpp.txt>
 
 Jeff Garzik, "Linux kernel patch submission format".
   <http://linux.yyz.us/patch-format.html>
diff --git a/Documentation/zh_CN/sparse.txt b/Documentation/zh_CN/sparse.txt
index 75992a603ae3..cc144e581515 100644
--- a/Documentation/zh_CN/sparse.txt
+++ b/Documentation/zh_CN/sparse.txt
@@ -22,7 +22,7 @@ Documentation/sparse.txt 的中文翻译
 ---------------------------------------------------------------------
 
 Copyright 2004 Linus Torvalds
-Copyright 2004 Pavel Machek <pavel@suse.cz>
+Copyright 2004 Pavel Machek <pavel@ucw.cz>
 Copyright 2006 Bob Copeland <me@bobcopeland.com>
 
 使用 sparse 工具做类型检查
diff --git a/Kbuild b/Kbuild
index 18a8bfbb353b..2114113ceca2 100644
--- a/Kbuild
+++ b/Kbuild
@@ -53,6 +53,7 @@ targets += arch/$(SRCARCH)/kernel/asm-offsets.s
 # Default sed regexp - multiline due to syntax constraints
 define sed-y
 	"/^->/{s:->#\(.*\):/* \1 */:; \
+	s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
 	s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
 	s:->::; p;}"
 endef
diff --git a/Kconfig b/Kconfig
new file mode 100644
index 000000000000..c13f48d65898
--- /dev/null
+++ b/Kconfig
@@ -0,0 +1,11 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+mainmenu "Linux/$ARCH $KERNELVERSION Kernel Configuration"
+
+config SRCARCH
+	string
+	option env="SRCARCH"
+
+source "arch/$SRCARCH/Kconfig"
diff --git a/MAINTAINERS b/MAINTAINERS
index 02f75fccac20..0094224ca79b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -157,9 +157,11 @@ S:	Maintained
 F:	drivers/net/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
-S:	Orphan
+S:	Maintained
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
@@ -241,21 +243,6 @@ F:	drivers/pnp/pnpacpi/
 F:	include/linux/acpi.h
 F:	include/acpi/
 
-ACPI BATTERY DRIVERS
-M:	Alexey Starikovskiy <astarikovskiy@suse.de>
-L:	linux-acpi@vger.kernel.org
-W:	http://www.lesswatts.org/projects/acpi/
-S:	Supported
-F:	drivers/acpi/battery.c
-F:	drivers/acpi/*sbs*
-
-ACPI EC DRIVER
-M:	Alexey Starikovskiy <astarikovskiy@suse.de>
-L:	linux-acpi@vger.kernel.org
-W:	http://www.lesswatts.org/projects/acpi/
-S:	Supported
-F:	drivers/acpi/ec.c
-
 ACPI FAN DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
@@ -313,11 +300,9 @@ S:	Maintained
 F:	drivers/hwmon/adm1029.c
 
 ADM8211 WIRELESS DRIVER
-M:	Michael Wu <flamingice@sourmilk.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/adm8211.*
 
 ADT746X FAN DRIVER
@@ -447,7 +432,7 @@ AMS (Apple Motion Sensor) DRIVER
 M:	Stelian Pop <stelian@popies.net>
 M:	Michael Hanselmann <linux-kernel@hansmi.ch>
 S:	Supported
-F:	drivers/hwmon/ams/
+F:	drivers/macintosh/ams/
 
 AMSO1100 RNIC DRIVER
 M:	Tom Tucker <tom@opengridcomputing.com>
@@ -456,9 +441,20 @@ L:	linux-rdma@vger.kernel.org
 S:	Maintained
 F:	drivers/infiniband/hw/amso1100/
 
+ANALOG DEVICES INC ASOC DRIVERS
+L:	uclinux-dist-devel@blackfin.uclinux.org
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+W:	http://blackfin.uclinux.org/
+S:	Supported
+F:	sound/soc/blackfin/*
+F:	sound/soc/codecs/ad1*
+F:	sound/soc/codecs/adau*
+F:	sound/soc/codecs/adav*
+F:	sound/soc/codecs/ssm*
+
 AOA (Apple Onboard Audio) ALSA DRIVER
 M:	Johannes Berg <johannes@sipsolutions.net>
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 F:	sound/aoa/
@@ -576,7 +572,6 @@ L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/nand/bcm_umi_nand.c
 F:	drivers/mtd/nand/bcm_umi_bch.c
-F:	drivers/mtd/nand/bcm_umi_hamming.c
 F:	drivers/mtd/nand/nand_bcm_umi.h
 
 ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
@@ -619,10 +614,10 @@ M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 
 ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
+M:	Hans Ulli Kroll <ulli.kroll@googlemail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T:	git git://gitorious.org/linux-gemini/mainline.git
-S:	Odd Fixes
+T:	git git://git.berlios.de/gemini-board
+S:	Maintained
 F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
@@ -644,9 +639,10 @@ T:	topgit git://git.openezx.org/openezx.git
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
-M:	Paulius Zaleckas <paulius.zaleckas@gmail.com>
+M:	Hans Ulli Kroll <ulli.kroll@googlemail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Odd Fixes
+S:	Maintained
+T:	git git://git.berlios.de/gemini-board
 F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
@@ -661,7 +657,7 @@ ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
 M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git://git.pengutronix.de/git/imx/linux-2.6.git
+T:	git git://git.pengutronix.de/git/imx/linux-2.6.git
 F:	arch/arm/mach-mx*/
 F:	arch/arm/plat-mxc/
 
@@ -695,6 +691,12 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
+ARM/INCOME PXA270 SUPPORT
+M:	Marek Vasut <marek.vasut@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-pxa/colibri-pxa270-income.c
+
 ARM/INTEL IOP32X ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
@@ -740,13 +742,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ixp4xx/
 
-ARM/INTEL RESEARCH IMOTE 2 MACHINE SUPPORT
-M:	Jonathan Cameron <jic23@cam.ac.uk>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/mach-pxa/imote2.c
-
-ARM/INTEL RESEARCH STARGATE 2 MACHINE SUPPORT
+ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
 M:	Jonathan Cameron <jic23@cam.ac.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -911,56 +907,66 @@ W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c2410/
 
-ARM/S3C2440 ARM ARCHITECTURE
+ARM/S3C244x ARM ARCHITECTURE
 M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c2440/
+F:	arch/arm/mach-s3c2443/
 
-ARM/S3C2442 ARM ARCHITECTURE
-M:	Ben Dooks <ben-linux@fluff.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
-S:	Maintained
-F:	arch/arm/mach-s3c2442/
-
-ARM/S3C2443 ARM ARCHITECTURE
+ARM/S3C64xx ARM ARCHITECTURE
 M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
-F:	arch/arm/mach-s3c2443/
+F:	arch/arm/mach-s3c64xx/
 
-ARM/S3C6400 ARM ARCHITECTURE
-M:	Ben Dooks <ben-linux@fluff.org>
+ARM/S5P ARM ARCHITECTURES
+M:	Kukjin Kim <kgene.kim@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
-F:	arch/arm/mach-s3c6400/
+F:	arch/arm/mach-s5p*/
 
-ARM/S3C6410 ARM ARCHITECTURE
-M:	Ben Dooks <ben-linux@fluff.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
+ARM/SAMSUNG S5P SERIES FIMC SUPPORT
+M:	Kyungmin Park <kyungmin.park@samsung.com>
+M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
+L:	linux-arm-kernel@lists.infradead.org
+L:	linux-media@vger.kernel.org
 S:	Maintained
-F:	arch/arm/mach-s3c6410/
+F:	arch/arm/plat-s5p/dev-fimc*
+F:	arch/arm/plat-samsung/include/plat/*fimc*
+F:	drivers/media/video/s5p-fimc/
 
 ARM/SHMOBILE ARM ARCHITECTURE
 M:	Paul Mundt <lethal@linux-sh.org>
 M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-sh@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
 W:	http://oss.renesas.com
+Q:	http://patchwork.kernel.org/project/linux-sh/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
 S:	Supported
 F:	arch/arm/mach-shmobile/
 F:	drivers/sh/
 
+ARM/TELECHIPS ARM ARCHITECTURE
+M:	"Hans J. Koch" <hjk@linutronix.de>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/plat-tcc/
+F:	arch/arm/mach-tcc8k/
+
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/TETON BGA MACHINE SUPPORT
+M:	Mark F. Brown <mark.brown314@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+
 ARM/THECUS N2100 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -977,12 +983,11 @@ F:	drivers/input/keyboard/w90p910_keypad.c
 F:	drivers/input/touchscreen/w90p910_ts.c
 F:	drivers/watchdog/nuc900_wdt.c
 F:	drivers/net/arm/w90p910_ether.c
-F:	drivers/mtd/nand/w90p910_nand.c
+F:	drivers/mtd/nand/nuc900_nand.c
 F:	drivers/rtc/rtc-nuc900.c
 F:	drivers/spi/spi_nuc900.c
 F:	drivers/usb/host/ehci-w90x900.c
 F:	drivers/video/nuc900fb.c
-F:	drivers/sound/soc/nuc900/
 
 ARM/U300 MACHINE SUPPORT
 M:	Linus Walleij <linus.walleij@stericsson.com>
@@ -1012,14 +1017,14 @@ M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-pxa/vpac270.c
-F:	arch/arm/mach-pxa/include/mach-pxa/vpac270.h
+F:	arch/arm/mach-pxa/include/mach/vpac270.h
 
 ARM/ZIPIT Z2 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-pxa/z2.c
-F:	arch/arm/mach-pxa/include/mach-pxa/z2.h
+F:	arch/arm/mach-pxa/include/mach/z2.h
 
 ASC7621 HARDWARE MONITOR DRIVER
 M:	George Joseph <george.joseph@fairview5.com>
@@ -1089,7 +1094,6 @@ F:	drivers/net/wireless/ath/ath5k/
 ATHEROS ATH9K WIRELESS DRIVER
 M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
 M:	Jouni Malinen <jmalinen@atheros.com>
-M:	Sujith Manoharan <Sujith.Manoharan@atheros.com>
 M:	Vasanthakumar Thiagarajan <vasanth@atheros.com>
 M:	Senthil Balasubramanian <senthilkumar@atheros.com>
 L:	linux-wireless@vger.kernel.org
@@ -1105,6 +1109,13 @@ W:	http://wireless.kernel.org/en/users/Drivers/ar9170
 S:	Maintained
 F:	drivers/net/wireless/ath/ar9170/
 
+CARL9170 LINUX COMMUNITY WIRELESS DRIVER
+M:	Christian Lamparter <chunkeey@googlemail.com>
+L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/en/users/Drivers/carl9170
+S:	Maintained
+F:	drivers/net/wireless/ath/carl9170/
+
 ATK0110 HWMON DRIVER
 M:	Luca Tettamanti <kronos.it@gmail.com>
 L:	lm-sensors@lm-sensors.org
@@ -1120,7 +1131,7 @@ ATLX ETHERNET DRIVERS
 M:	Jay Cliburn <jcliburn@gmail.com>
 M:	Chris Snook <chris.snook@gmail.com>
 M:	Jie Yang <jie.yang@atheros.com>
-L:	atl1-devel@lists.sourceforge.net
+L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
 S:	Maintained
@@ -1205,7 +1216,7 @@ F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
 W:	http://www.atmel.com/products/AVR32/
 W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
@@ -1213,7 +1224,7 @@ S:	Supported
 F:	arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
 S:	Supported
 F:	arch/avr32/mach-at32ap/
 
@@ -1255,8 +1266,7 @@ S:	Maintained
 F:	drivers/net/hamradio/baycom*
 
 BEFS FILE SYSTEM
-M:	"Sergey S. Kostyliov" <rathamahata@php4.ru>
-S:	Maintained
+S:	Orphan
 F:	Documentation/filesystems/befs.txt
 F:	fs/befs/
 
@@ -1330,16 +1340,19 @@ F:	drivers/mtd/devices/block2mtd.c
 
 BLUETOOTH DRIVERS
 M:	Marcel Holtmann <marcel@holtmann.org>
+M:	Gustavo F. Padovan <padovan@profusion.mobi>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git
 S:	Maintained
 F:	drivers/bluetooth/
 
 BLUETOOTH SUBSYSTEM
 M:	Marcel Holtmann <marcel@holtmann.org>
+M:	Gustavo F. Padovan <padovan@profusion.mobi>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git
 S:	Maintained
 F:	net/bluetooth/
 F:	include/net/bluetooth/
@@ -1369,7 +1382,7 @@ BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
 M:	Eilon Greenstein <eilong@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/bnx2x*
+F:	drivers/net/bnx2x/
 
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 M:	Matt Carlson <mcarlson@broadcom.com>
@@ -1378,12 +1391,27 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tg3.*
 
+BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
+M:	Brett Rudley <brudley@broadcom.com>
+M:	Henry Ptasinski <henryp@broadcom.com>
+M:	Nohee Ko <noheek@broadcom.com>
+L:	linux-wireless@vger.kernel.org
+S:	Supported
+F:	drivers/staging/brcm80211/
+
 BROCADE BFA FC SCSI DRIVER
 M:	Jing Huang <huangj@brocade.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/scsi/bfa/
 
+BROCADE BNA 10 GIGABIT ETHERNET DRIVER
+M:	Rasesh Mody <rmody@brocade.com>
+M:	Debashis Dutt <ddutt@brocade.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/bna/
+
 BSG (block layer generic sg v4 driver)
 M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:	linux-scsi@vger.kernel.org
@@ -1431,6 +1459,16 @@ S:	Maintained
 F:	Documentation/video4linux/cafe_ccic
 F:	drivers/media/video/cafe_ccic*
 
+CAIF NETWORK LAYER
+M:	Sjur Braendeland <sjur.brandeland@stericsson.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	Documentation/networking/caif/
+F:	drivers/net/caif/
+F:	include/linux/caif/
+F:	include/net/caif/
+F:	net/caif/
+
 CALGARY x86-64 IOMMU
 M:	Muli Ben-Yehuda <muli@il.ibm.com>
 M:	"Jon D. Mason" <jdmason@kudzu.us>
@@ -1469,8 +1507,8 @@ F:	include/linux/can/platform/
 
 CELL BROADBAND ENGINE ARCHITECTURE
 M:	Arnd Bergmann <arnd@arndb.de>
-L:	linuxppc-dev@ozlabs.org
-L:	cbe-oss-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
+L:	cbe-oss-dev@lists.ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
 F:	arch/powerpc/include/asm/cell*.h
@@ -1486,11 +1524,12 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
 S:	Supported
 F:	Documentation/filesystems/ceph.txt
 F:	fs/ceph
+F:	net/ceph
+F:	include/linux/ceph
 
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
-M:	David Vrabel <david.vrabel@csr.com>
 L:	linux-usb@vger.kernel.org
-S:	Supported
+S:	Orphan
 F:	Documentation/usb/WUSB-Design-overview.txt
 F:	Documentation/usb/wusb-cbaf
 F:	drivers/usb/host/hwa-hc.c
@@ -1529,9 +1568,9 @@ S:	Supported
 F:	scripts/checkpatch.pl
 
 CISCO VIC ETHERNET NIC DRIVER
-M:	Scott Feldman <scofeldm@cisco.com>
 M:	Vasanthy Kolluri <vkolluri@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
+M:	David Wang <dwang2@cisco.com>
 S:	Supported
 F:	drivers/net/enic/
 
@@ -1571,6 +1610,16 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Supported
 F:	drivers/platform/x86/classmate-laptop.c
 
+COCCINELLE/Semantic Patches (SmPL)
+M:	Julia Lawall <julia@diku.dk>
+M:	Gilles Muller <Gilles.Muller@lip6.fr>
+M:	Nicolas Palix <npalix.work@gmail.com>
+L:	cocci@diku.dk (moderated for non-subscribers)
+W:	http://coccinelle.lip6.fr/
+S:	Supported
+F:	scripts/coccinelle/
+F:	scripts/coccicheck
+
 CODA FILE SYSTEM
 M:	Jan Harkes <jaharkes@cs.cmu.edu>
 M:	coda@cs.cmu.edu
@@ -1652,8 +1701,7 @@ F:	kernel/cgroup*
 F:	mm/*cgroup*
 
 CORETEMP HARDWARE MONITORING DRIVER
-M:	Rudolf Marek <r.marek@assembler.cz>
-M:	Huaxu Wan <huaxu.wan@intel.com>
+M:	Fenghua Yu <fenghua.yu@intel.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/coretemp
@@ -1709,6 +1757,7 @@ L:	linux-cris-kernel@axis.com
 W:	http://developer.axis.com
 S:	Maintained
 F:	arch/cris/
+F:	drivers/serial/crisv10.*
 
 CRYPTO API
 M:	Herbert Xu <herbert@gondor.apana.org.au>
@@ -1726,6 +1775,8 @@ CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
 M:	Neil Horman <nhorman@tuxdriver.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
+F:	crypto/ansi_cprng.c
+F:	crypto/rng.c
 
 CS5535 Audio ALSA driver
 M:	Jaya Kumar <jayakumar.alsa@gmail.com>
@@ -1771,6 +1822,13 @@ W:	http://www.openfabrics.org
 S:	Supported
 F:	drivers/infiniband/hw/cxgb4/
 
+CXGB4VF ETHERNET DRIVER (CXGB4VF)
+M:	Casey Leedom <leedom@chelsio.com>
+L:	netdev@vger.kernel.org
+W:	http://www.chelsio.com
+S:	Supported
+F:	drivers/net/cxgb4vf/
+
 CYBERPRO FB DRIVER
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1877,6 +1935,7 @@ F:	drivers/firmware/dcdbas.*
 DELL WMI EXTRAS DRIVER
 M:	Matthew Garrett <mjg59@srcf.ucam.org>
 S:	Maintained
+F:	drivers/platform/x86/dell-wmi.c
 
 DEVICE NUMBER REGISTRY
 M:	Torben Mathiasen <device@lanana.org>
@@ -1990,14 +2049,16 @@ F:	drivers/block/drbd/
 F:	lib/lru_cache.c
 F:	Documentation/blockdev/drbd/
 
-DRIVER CORE, KOBJECTS, AND SYSFS
+DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 F:	Documentation/kobject.txt
 F:	drivers/base/
 F:	fs/sysfs/
+F:	fs/debugfs/
 F:	include/linux/kobj*
+F:	include/linux/debugfs.h
 F:	lib/kobj*
 
 DRM DRIVERS
@@ -2006,6 +2067,16 @@ L:	dri-devel@lists.freedesktop.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/gpu/drm/
+F:	include/drm/
+
+INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
+M:	Chris Wilson <chris@chris-wilson.co.uk>
+L:	intel-gfx@lists.freedesktop.org
+L:	dri-devel@lists.freedesktop.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
+S:	Supported
+F:	drivers/gpu/drm/i915
+F:	include/drm/i915*
 
 DSCC4 DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
@@ -2116,6 +2187,13 @@ W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5400_edac.c
 
+EDAC-I7300
+M:	Mauro Carvalho Chehab <mchehab@redhat.com>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/i7300_edac.c
+
 EDAC-I7CORE
 M:	Mauro Carvalho Chehab <mchehab@redhat.com>
 L:	linux-edac@vger.kernel.org
@@ -2155,6 +2233,12 @@ W:	http://acpi4asus.sf.net
 S:	Maintained
 F:	drivers/platform/x86/eeepc-laptop.c
 
+EFIFB FRAMEBUFFER DRIVER
+L:	linux-fbdev@vger.kernel.org
+M:	Peter Jones <pjones@redhat.com>
+S:	Maintained
+F:	drivers/video/efifb.c
+
 EFS FILESYSTEM
 W:	http://aeschi.ch.eu.org/efs/
 S:	Orphan
@@ -2167,6 +2251,12 @@ L:	linux-rdma@vger.kernel.org
 S:	Supported
 F:	drivers/infiniband/hw/ehca/
 
+EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
+M:	Breno Leitao <leitao@linux.vnet.ibm.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ehea/
+
 EMBEDDED LINUX
 M:	Paul Gortmaker <paul.gortmaker@windriver.com>
 M:	Matt Mackall <mpm@selenic.com>
@@ -2188,6 +2278,12 @@ F:	drivers/misc/cb710/
 F:	drivers/mmc/host/cb710-mmc.*
 F:	include/linux/cb710.h
 
+ENE KB2426 (ENE0100/ENE020XX) INFRARED RECEIVER
+M:	Maxim Levitsky <maximlevitsky@gmail.com>
+S:	Maintained
+F:	drivers/media/IR/ene_ir.c
+F:	drivers/media/IR/ene_ir.h
+
 EPSON 1355 FRAMEBUFFER DRIVER
 M:	Christopher Hoover <ch@murgatroid.com>
 M:	Christopher Hoover <ch@hpl.hp.com>
@@ -2222,6 +2318,7 @@ S:	Maintained
 F:	drivers/net/eth16i.c
 
 EXT2 FILE SYSTEM
+M:	Jan Kara <jack@suse.cz>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/ext2.txt
@@ -2229,8 +2326,9 @@ F:	fs/ext2/
 F:	include/linux/ext2*
 
 EXT3 FILE SYSTEM
+M:	Jan Kara <jack@suse.cz>
 M:	Andrew Morton <akpm@linux-foundation.org>
-M:	Andreas Dilger <adilger@sun.com>
+M:	Andreas Dilger <adilger.kernel@dilger.ca>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/ext3.txt
@@ -2239,7 +2337,7 @@ F:	include/linux/ext3*
 
 EXT4 FILE SYSTEM
 M:	"Theodore Ts'o" <tytso@mit.edu>
-M:	Andreas Dilger <adilger@sun.com>
+M:	Andreas Dilger <adilger.kernel@dilger.ca>
 L:	linux-ext4@vger.kernel.org
 W:	http://ext4.wiki.kernel.org
 Q:	http://patchwork.ozlabs.org/project/linux-ext4/list/
@@ -2254,6 +2352,12 @@ S:	Maintained
 F:	Documentation/hwmon/f71805f
 F:	drivers/hwmon/f71805f.c
 
+FANOTIFY
+M:	Eric Paris <eparis@redhat.com>
+S:	Maintained
+F:	fs/notify/fanotify/
+F:	include/linux/fanotify.h
+
 FARSYNC SYNCHRONOUS DRIVER
 M:	Kevin Curtis <kevin.curtis@farsite.co.uk>
 W:	http://www.farsite.co.uk/
@@ -2307,6 +2411,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
 S:	Maintained
 F:	drivers/firewire/
 F:	include/linux/firewire*.h
+F:	tools/firewire/
 
 FIRMWARE LOADER (request_firmware)
 S:	Orphan
@@ -2338,13 +2443,13 @@ F:	include/linux/fb.h
 FREESCALE DMA DRIVER
 M:	Li Yang <leoli@freescale.com>
 M:	Zhang Wei <zw@zh-kernel.org>
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
 
 FREESCALE I2C CPM DRIVER
 M:	Jochen Friedrich <jochen@scram.de>
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-cpm.c
@@ -2360,7 +2465,7 @@ F:	drivers/video/imxfb.c
 FREESCALE SOC FS_ENET DRIVER
 M:	Pantelis Antoniou <pantelis.antoniou@gmail.com>
 M:	Vitaly Bordug <vbordug@ru.mvista.com>
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/fs_enet/
@@ -2368,7 +2473,7 @@ F:	include/linux/fs_enet_pd.h
 
 FREESCALE QUICC ENGINE LIBRARY
 M:	Timur Tabi <timur@freescale.com>
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
@@ -2376,27 +2481,27 @@ F:	arch/powerpc/include/asm/*qe.h
 FREESCALE USB PERIPHERAL DRIVERS
 M:	Li Yang <leoli@freescale.com>
 L:	linux-usb@vger.kernel.org
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	drivers/usb/gadget/fsl*
 
 FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
 M:	Li Yang <leoli@freescale.com>
 L:	netdev@vger.kernel.org
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	drivers/net/ucc_geth*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
 M:	Timur Tabi <timur@freescale.com>
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
 F:	drivers/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
 M:	Timur Tabi <timur@freescale.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 S:	Supported
 F:	sound/soc/fsl/fsl*
 F:	sound/soc/fsl/mpc8610_hpcd.c
@@ -2457,7 +2562,7 @@ S:	Supported
 F:	drivers/scsi/gdt*
 
 GENERIC GPIO I2C DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
 S:	Supported
 F:	drivers/i2c/busses/i2c-gpio.c
 F:	include/linux/i2c-gpio.h
@@ -2516,10 +2621,10 @@ F:	drivers/net/greth*
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
 M:	Frank Seidel <frank@f-seidel.de>
-L:	lm-sensors@lm-sensors.org
+L:	platform-driver-x86@vger.kernel.org
 W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
 S:	Maintained
-F:	drivers/hwmon/hdaps.c
+F:	drivers/platform/x86/hdaps.c
 
 HWPOISON MEMORY FAILURE HANDLING
 M:	Andi Kleen <andi@firstfloor.org>
@@ -2531,7 +2636,7 @@ F:	mm/memory-failure.c
 F:	mm/hwpoison-inject.c
 
 HYPERVISOR VIRTUAL CONSOLE DRIVER
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 S:	Odd Fixes
 F:	drivers/char/hvc_*
 
@@ -2592,9 +2697,14 @@ S:	Maintained
 F:	drivers/media/video/gspca/
 
 HARDWARE MONITORING
+M:	Jean Delvare <khali@linux-fr.org>
+M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
-S:	Orphan
+T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
+T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
+S:	Maintained
 F:	Documentation/hwmon/
 F:	drivers/hwmon/
 F:	include/linux/hwmon*.h
@@ -2620,6 +2730,14 @@ S:	Maintained
 F:	Documentation/blockdev/cpqarray.txt
 F:	drivers/block/cpqarray.*
 
+HEWLETT-PACKARD SMART ARRAY RAID DRIVER (hpsa)
+M:	Stephen M. Cameron <scameron@beardog.cce.hp.com>
+L:	iss_storagedev@hp.com
+S:	Supported
+F:	Documentation/scsi/hpsa.txt
+F:	drivers/scsi/hpsa*.[ch]
+F:	include/linux/cciss*.h
+
 HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
 M:	Mike Miller <mike.miller@hp.com>
 L:	iss_storagedev@hp.com
@@ -2724,11 +2842,6 @@ S:	Maintained
 F:	arch/x86/kernel/hpet.c
 F:	arch/x86/include/asm/hpet.h
 
-HPET:	ACPI
-M:	Bob Picco <bob.picco@hp.com>
-S:	Maintained
-F:	drivers/char/hpet.c
-
 HPFS FILESYSTEM
 M:	Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
 W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
@@ -2808,6 +2921,12 @@ M:	Brian King <brking@us.ibm.com>
 S:	Supported
 F:	drivers/scsi/ipr.*
 
+IBM Power Virtual Ethernet Device Driver
+M:	Santiago Leon <santil@linux.vnet.ibm.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/ibmveth.*
+
 IBM ServeRAID RAID DRIVER
 P:	Jack Hammer
 M:	Dave Jeffery <ipslinux@adaptec.com>
@@ -2872,7 +2991,7 @@ M:	Roland Dreier <rolandd@cisco.com>
 M:	Sean Hefty <sean.hefty@intel.com>
 M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	linux-rdma@vger.kernel.org
-W:	http://www.openib.org/
+W:	http://www.openfabrics.org/
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
 S:	Supported
@@ -2977,16 +3096,27 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ixp2000/
 
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
 M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
 M:	Bruce Allan <bruce.w.allan@intel.com>
-M:	Alex Duyck <alexander.h.duyck@intel.com>
+M:	Carolyn Wyborny <carolyn.wyborny@intel.com>
+M:	Don Skidmore <donald.c.skidmore@intel.com>
+M:	Greg Rose <gregory.v.rose@intel.com>
 M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://e1000.sourceforge.net/
 S:	Supported
+F:	Documentation/networking/e100.txt
+F:	Documentation/networking/e1000.txt
+F:	Documentation/networking/e1000e.txt
+F:	Documentation/networking/igb.txt
+F:	Documentation/networking/igbvf.txt
+F:	Documentation/networking/ixgb.txt
+F:	Documentation/networking/ixgbe.txt
+F:	Documentation/networking/ixgbevf.txt
 F:	drivers/net/e100.c
 F:	drivers/net/e1000/
 F:	drivers/net/e1000e/
@@ -2994,6 +3124,7 @@ F:	drivers/net/igb/
 F:	drivers/net/igbvf/
 F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
+F:	drivers/net/ixgbevf/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
 L:	linux-wireless@vger.kernel.org
@@ -3054,7 +3185,7 @@ F:	drivers/net/ioc3-eth.c
 
 IOC3 SERIAL DRIVER
 M:	Pat Gefre <pfg@sgi.com>
-L:	linux-mips@linux-mips.org
+L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/serial/ioc3_serial.c
 
@@ -3131,6 +3262,12 @@ F:	drivers/net/irda/
 F:	include/net/irda/
 F:	net/irda/
 
+IRQ SUBSYSTEM
+M:	Thomas Gleixner <tglx@linutronix.de>
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core
+F:	kernel/irq/
+
 ISAPNP
 M:	Jaroslav Kysela <perex@perex.cz>
 S:	Maintained
@@ -3184,6 +3321,13 @@ F:	Documentation/video4linux/*.ivtv
 F:	drivers/media/video/ivtv/
 F:	include/linux/ivtv*
 
+JC42.4 TEMPERATURE SENSOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	drivers/hwmon/jc42.c
+F:	Documentation/hwmon/jc42
+
 JFS FILESYSTEM
 M:	Dave Kleikamp <shaggy@linux.vnet.ibm.com>
 L:	jfs-discussion@lists.sourceforge.net
@@ -3216,6 +3360,12 @@ F:	fs/jbd*/
 F:	include/linux/ext*jbd*.h
 F:	include/linux/jbd*.h
 
+JSM Neo PCI based serial card
+M:	Breno Leitao <leitao@linux.vnet.ibm.com>
+L:	linux-serial@vger.kernel.org
+S:	Maintained
+F:	drivers/serial/jsm/
+
 K8TEMP HARDWARE MONITORING DRIVER
 M:	Rudolf Marek <r.marek@assembler.cz>
 L:	lm-sensors@lm-sensors.org
@@ -3242,8 +3392,8 @@ F:	Documentation/kdump/
 KERNEL AUTOMOUNTER (AUTOFS)
 M:	"H. Peter Anvin" <hpa@zytor.com>
 L:	autofs@linux.kernel.org
-S:	Odd Fixes
-F:	fs/autofs/
+S:	Obsolete
+F:	drivers/staging/autofs/
 
 KERNEL AUTOMOUNTER v4 (AUTOFS4)
 M:	Ian Kent <raven@themaw.net>
@@ -3253,8 +3403,8 @@ F:	fs/autofs4/
 
 KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
 M:	Michal Marek <mmarek@suse.cz>
-T:	git git://repo.or.cz/linux-kbuild.git for-next
-T:	git git://repo.or.cz/linux-kbuild.git for-linus
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6.git for-next
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6.git rc-fixes
 L:	linux-kbuild@vger.kernel.org
 S:	Maintained
 F:	Documentation/kbuild/
@@ -3266,7 +3416,7 @@ F:	scripts/package/
 
 KERNEL JANITORS
 L:	kernel-janitors@vger.kernel.org
-W:	http://janitor.kernelnewbies.org/
+W:	http://kernelnewbies.org/KernelJanitors
 S:	Odd Fixes
 
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
@@ -3334,7 +3484,7 @@ F:	drivers/s390/kvm/
 
 KEXEC
 M:	Eric Biederman <ebiederm@xmission.com>
-W:	http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
+W:	http://kernel.org/pub/linux/utils/kernel/kexec/
 L:	kexec@lists.infradead.org
 S:	Maintained
 F:	include/linux/kexec.h
@@ -3380,13 +3530,6 @@ F:	include/linux/kmemleak.h
 F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c
 
-KMEMTRACE
-M:	Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
-S:	Maintained
-F:	Documentation/trace/kmemtrace.txt
-F:	include/linux/kmemtrace.h
-F:	kernel/trace/kmemtrace.c
-
 KPROBES
 M:	Ananth N Mavinakayanahalli <ananth@in.ibm.com>
 M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
@@ -3435,9 +3578,9 @@ F:	drivers/usb/misc/legousbtower.c
 
 LGUEST
 M:	Rusty Russell <rusty@rustcorp.com.au>
-L:	lguest@ozlabs.org
+L:	lguest@lists.ozlabs.org
 W:	http://lguest.ozlabs.org/
-S:	Maintained
+S:	Odd Fixes
 F:	Documentation/lguest/
 F:	arch/x86/lguest/
 F:	drivers/lguest/
@@ -3454,7 +3597,7 @@ LINUX FOR POWERPC (32-BIT AND 64-BIT)
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 M:	Paul Mackerras <paulus@samba.org>
 W:	http://www.penguinppc.org/
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 Q:	http://patchwork.ozlabs.org/project/linuxppc-dev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
 S:	Supported
@@ -3464,14 +3607,14 @@ F:	arch/powerpc/
 LINUX FOR POWER MACINTOSH
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 W:	http://www.penguinppc.org/
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	arch/powerpc/platforms/powermac/
 F:	drivers/macintosh/
 
 LINUX FOR POWERPC EMBEDDED MPC5XXX
 M:	Grant Likely <grant.likely@secretlab.ca>
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	arch/powerpc/platforms/512x/
@@ -3481,7 +3624,7 @@ LINUX FOR POWERPC EMBEDDED PPC4XX
 M:	Josh Boyer <jwboyer@linux.vnet.ibm.com>
 M:	Matt Porter <mporter@kernel.crashing.org>
 W:	http://www.penguinppc.org/
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
 S:	Maintained
 F:	arch/powerpc/platforms/40x/
@@ -3490,7 +3633,7 @@ F:	arch/powerpc/platforms/44x/
 LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
 M:	Grant Likely <grant.likely@secretlab.ca>
 W:	http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	arch/powerpc/*/*virtex*
@@ -3500,19 +3643,20 @@ LINUX FOR POWERPC EMBEDDED PPC8XX
 M:	Vitaly Bordug <vitb@kernel.crashing.org>
 M:	Marcelo Tosatti <marcelo@kvack.org>
 W:	http://www.penguinppc.org/
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
+F:	arch/powerpc/platforms/8xx/
 
 LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
 M:	Kumar Gala <galak@kernel.crashing.org>
 W:	http://www.penguinppc.org/
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	arch/powerpc/platforms/83xx/
 
 LINUX FOR POWERPC PA SEMI PWRFICIENT
 M:	Olof Johansson <olof@lixom.net>
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	arch/powerpc/platforms/pasemi/
 F:	drivers/*/*pasemi*
@@ -3597,6 +3741,13 @@ L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/sym53c8xx_2/
 
+LTC4261 HARDWARE MONITOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/ltc4261
+F:	drivers/hwmon/ltc4261.c
+
 LTP (Linux Test Project)
 M:	Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
 M:	Garrett Cooper <yanegomi@gmail.com>
@@ -3604,7 +3755,7 @@ M:	Mike Frysinger <vapier@gentoo.org>
 M:	Subrata Modak <subrata@linux.vnet.ibm.com>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
 W:	http://ltp.sourceforge.net/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
+T:	git git://ltp.git.sourceforge.net/gitroot/ltp/ltp-dev
 S:	Maintained
 
 M32R ARCHITECTURE
@@ -3686,13 +3837,13 @@ F:	include/linux/mv643xx.h
 MARVELL MWL8K WIRELESS DRIVER
 M:	Lennert Buytenhek <buytenh@wantstofly.org>
 L:	linux-wireless@vger.kernel.org
-S:	Maintained
+S:	Odd Fixes
 F:	drivers/net/wireless/mwl8k.c
 
 MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
 M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Odd Fixes
-F: drivers/mmc/host/mvsdio.*
+F:	drivers/mmc/host/mvsdio.*
 
 MARVELL YUKON / SYSKONNECT DRIVER
 M:	Mirko Lindner <mlindner@syskonnect.de>
@@ -3701,9 +3852,8 @@ W:	http://www.syskonnect.com
 S:	Supported
 
 MATROX FRAMEBUFFER DRIVER
-M:	Petr Vandrovec <vandrove@vc.cvut.cz>
 L:	linux-fbdev@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
@@ -3827,10 +3977,8 @@ F:	Documentation/serial/moxa-smartio
 F:	drivers/char/mxser.*
 
 MSI LAPTOP SUPPORT
-M:	Lennart Poettering <mzxreary@0pointer.de>
+M:	Lee, Chun-Yi <jlee@novell.com>
 L:	platform-driver-x86@vger.kernel.org
-W:	https://tango.0pointer.de/mailman/listinfo/s270-linux
-W:	http://0pointer.de/lennart/tchibo.html
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
 
@@ -3847,8 +3995,10 @@ S:	Supported
 F:	drivers/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-S:	Orphan
+M:	Chris Ball <cjb@laptop.org>
 L:	linux-mmc@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+S:	Maintained
 F:	drivers/mmc/
 F:	include/linux/mmc/
 
@@ -3865,13 +4015,12 @@ F:	Documentation/sound/oss/MultiSound
 F:	sound/oss/msnd*
 
 MULTITECH MULTIPORT CARD (ISICOM)
-M:	Jiri Slaby <jirislaby@gmail.com>
-S:	Maintained
+S:	Orphan
 F:	drivers/char/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M:	Felipe Balbi <felipe.balbi@nokia.com>
+M:	Felipe Balbi <balbi@ti.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://gitorious.org/usb/usb.git
 S:	Maintained
@@ -3891,8 +4040,8 @@ S:	Maintained
 F:	drivers/net/natsemi.c
 
 NCP FILESYSTEM
-M:	Petr Vandrovec <vandrove@vc.cvut.cz>
-S:	Maintained
+M:	Petr Vandrovec <petr@vandrovec.name>
+S:	Odd Fixes
 F:	fs/ncpfs/
 
 NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
@@ -3915,17 +4064,19 @@ L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
 
-NETERION (S2IO) 10GbE DRIVER (xframe/vxge)
-M:	Ramkrishna Vepa <ram.vepa@neterion.com>
-M:	Rastapur Santosh <santosh.rastapur@neterion.com>
-M:	Sivakumar Subramani <sivakumar.subramani@neterion.com>
-M:	Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
+NETERION 10GbE DRIVERS (s2io/vxge)
+M:	Ramkrishna Vepa <ramkrishna.vepa@exar.com>
+M:	Sivakumar Subramani <sivakumar.subramani@exar.com>
+M:	Sreenivasa Honnur <sreenivasa.honnur@exar.com>
+M:	Jon Mason <jon.mason@exar.com>
 L:	netdev@vger.kernel.org
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
 S:	Supported
 F:	Documentation/networking/s2io.txt
 F:	drivers/net/s2io*
+F:	Documentation/networking/vxge.txt
+F:	drivers/net/vxge/
 
 NETFILTER/IPTABLES/IPCHAINS
 P:	Rusty Russell
@@ -4024,7 +4175,7 @@ F:	net/rfkill/
 F:	net/wireless/
 F:	include/net/ieee80211*
 F:	include/linux/wireless.h
-F:	include/linux/iw_handler.h
+F:	include/net/iw_handler.h
 F:	drivers/net/wireless/
 
 NETWORKING DRIVERS
@@ -4167,11 +4318,13 @@ S:	Maintained
 F:	drivers/char/hw_random/omap-rng.c
 
 OMAP USB SUPPORT
-M:	Felipe Balbi <felipe.balbi@nokia.com>
+M:	Felipe Balbi <balbi@ti.com>
 M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 S:	Maintained
+F:	drivers/usb/*/*omap*
+F:	arch/arm/*omap*/usb*
 
 OMFS FILESYSTEM
 M:	Bob Copeland <me@bobcopeland.com>
@@ -4251,13 +4404,12 @@ F:	Documentation/filesystems/dlmfs.txt
 F:	fs/ocfs2/
 
 ORINOCO DRIVER
-M:	Pavel Roskin <proski@gnu.org>
-M:	David Gibson <hermes@gibson.dropbear.id.au>
 L:	linux-wireless@vger.kernel.org
 L:	orinoco-users@lists.sourceforge.net
 L:	orinoco-devel@lists.sourceforge.net
+W:	http://linuxwireless.org/en/users/Drivers/orinoco
 W:	http://www.nongnu.org/orinoco/
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/orinoco/
 
 OSD LIBRARY and FILESYSTEM
@@ -4272,10 +4424,9 @@ F:	include/scsi/osd_*
 F:	fs/exofs/
 
 P54 WIRELESS DRIVER
-M:	Michael Wu <flamingice@sourmilk.net>
+M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://prism54.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
+W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Maintained
 F:	drivers/net/wireless/p54/
 
@@ -4291,13 +4442,22 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-pasemi.c
 
+PADATA PARALLEL EXECUTION MECHANISM
+M:	Steffen Klassert <steffen.klassert@secunet.com>
+L:	linux-kernel@vger.kernel.org
+L:	linux-crypto@vger.kernel.org
+S:	Maintained
+F:	kernel/padata.c
+F:	include/linux/padata.h
+F:	Documentation/padata.txt
+
 PANASONIC LAPTOP ACPI EXTRAS DRIVER
 M:	Harald Welte <laforge@gnumonks.org>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/panasonic-laptop.c
 
-PANASONIC MN10300/AM33 PORT
+PANASONIC MN10300/AM33/AM34 PORT
 M:	David Howells <dhowells@redhat.com>
 M:	Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
 L:	linux-am33-list@redhat.com (moderated for non-subscribers)
@@ -4357,12 +4517,25 @@ M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Maintained
 F:	drivers/char/pc8736x_gpio.c
 
+PC87427 HARDWARE MONITORING DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/pc87427
+F:	drivers/hwmon/pc87427.c
+
 PCA9532 LED DRIVER
 M:	Riku Voipio <riku.voipio@iki.fi>
 S:	Maintained
 F:	drivers/leds/leds-pca9532.c
 F:	include/linux/leds-pca9532.h
 
+PCA9541 I2C BUS MASTER SELECTOR DRIVER
+M:	Guenter Roeck <guenter.roeck@ericsson.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/muxes/pca9541.c
+
 PCA9564/PCA9665 I2C BUS DRIVER
 M:	Wolfram Sang <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
@@ -4411,6 +4584,13 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/pcnet32.c
 
+PCRYPT PARALLEL CRYPTO ENGINE
+M:	Steffen Klassert <steffen.klassert@secunet.com>
+L:	linux-crypto@vger.kernel.org
+S:	Maintained
+F:	crypto/pcrypt.c
+F:	include/crypto/pcrypt.h
+
 PER-TASK DELAY ACCOUNTING
 M:	Balbir Singh <balbir@linux.vnet.ibm.com>
 S:	Maintained
@@ -4439,6 +4619,14 @@ L:	linux-abi-devel@lists.sourceforge.net
 S:	Maintained
 F:	include/linux/personality.h
 
+PHONET PROTOCOL
+M:	Remi Denis-Courmont <remi.denis-courmont@nokia.com>
+S:	Supported
+F:	Documentation/networking/phonet.txt
+F:	include/linux/phonet.h
+F:	include/net/phonet/
+F:	net/phonet/
+
 PHRAM MTD DRIVER
 M:	Joern Engel <joern@lazybastard.org>
 L:	linux-mtd@lists.infradead.org
@@ -4513,7 +4701,7 @@ F:	drivers/net/pppox.c
 PPP OVER L2TP
 M:	James Chapman <jchapman@katalix.com>
 S:	Maintained
-F:	drivers/net/pppol2tp.c
+F:	net/l2tp/l2tp_ppp.c
 F:	include/linux/if_pppol2tp.h
 
 PPS SUPPORT
@@ -4536,15 +4724,10 @@ F:	include/linux/preempt.h
 PRISM54 WIRELESS DRIVER
 M:	"Luis R. Rodriguez" <mcgrof@gmail.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://prism54.org
-S:	Maintained
+W:	http://wireless.kernel.org/en/users/Drivers/p54
+S:	Obsolete
 F:	drivers/net/wireless/prism54/
 
-PROMISE DC4030 CACHING DISK CONTROLLER DRIVER
-M:	Peter Denison <promise@pnd-pc.demon.co.uk>
-W:	http://www.pnd-pc.demon.co.uk/promise/
-S:	Maintained
-
 PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
 M:	Mikael Pettersson <mikpe@it.uu.se>
 L:	linux-ide@vger.kernel.org
@@ -4554,14 +4737,14 @@ F:	drivers/ata/sata_promise.*
 PS3 NETWORK SUPPORT
 M:	Geoff Levand <geoff@infradead.org>
 L:	netdev@vger.kernel.org
-L:	cbe-oss-dev@ozlabs.org
+L:	cbe-oss-dev@lists.ozlabs.org
 S:	Maintained
 F:	drivers/net/ps3_gelic_net.*
 
 PS3 PLATFORM SUPPORT
 M:	Geoff Levand <geoff@infradead.org>
-L:	linuxppc-dev@ozlabs.org
-L:	cbe-oss-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
+L:	cbe-oss-dev@lists.ozlabs.org
 S:	Maintained
 F:	arch/powerpc/boot/ps3*
 F:	arch/powerpc/include/asm/lv1call.h
@@ -4575,8 +4758,9 @@ F:	sound/ppc/snd_ps3*
 
 PS3VRAM DRIVER
 M:	Jim Paris <jim@jtan.com>
-L:	cbe-oss-dev@ozlabs.org
+L:	cbe-oss-dev@lists.ozlabs.org
 S:	Maintained
+F:	drivers/block/ps3vram.c
 
 PTRACE SUPPORT
 M:	Roland McGrath <roland@redhat.com>
@@ -4692,6 +4876,15 @@ F:	fs/qnx4/
 F:	include/linux/qnx4_fs.h
 F:	include/linux/qnxtypes.h
 
+RADOS BLOCK DEVICE (RBD)
+F:	include/linux/qnxtypes.h
+M:	Yehuda Sadeh <yehuda@hq.newdream.net>
+M:	Sage Weil <sage@newdream.net>
+M:	ceph-devel@vger.kernel.org
+S:	Supported
+F:	drivers/block/rbd.c
+F:	drivers/block/rbd_types.h
+
 RADEON FRAMEBUFFER DISPLAY DRIVER
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 L:	linux-fbdev@vger.kernel.org
@@ -4717,7 +4910,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
 F:	drivers/net/wireless/rt2x00/
 
 RAMDISK RAM BLOCK DEVICE DRIVER
-M:	Nick Piggin <npiggin@suse.de>
+M:	Nick Piggin <npiggin@kernel.dk>
 S:	Maintained
 F:	Documentation/blockdev/ramdisk.txt
 F:	drivers/block/brd.c
@@ -4733,15 +4926,15 @@ S:	Maintained
 F:	drivers/rapidio/
 
 RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
-M:	Corey Thomas <coreythomas@charter.net>
 L:	linux-wireless@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/ray*
 
 RCUTORTURE MODULE
 M:	Josh Triplett <josh@freedesktop.org>
 M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu.git
 F:	Documentation/RCU/torture.txt
 F:	kernel/rcutorture.c
 
@@ -4766,6 +4959,7 @@ M:	Dipankar Sarma <dipankar@in.ibm.com>
 M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 W:	http://www.rdrop.com/users/paulmck/rclock/
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu.git
 F:	Documentation/RCU/
 F:	include/linux/rcu*
 F:	include/linux/srcu*
@@ -4773,12 +4967,10 @@ F:	kernel/rcu*
 F:	kernel/srcu*
 X:	kernel/rcutorture.c
 
-REAL TIME CLOCK DRIVER
+REAL TIME CLOCK DRIVER (LEGACY)
 M:	Paul Gortmaker <p_gortmaker@yahoo.com>
 S:	Maintained
-F:	Documentation/rtc.txt
-F:	drivers/rtc/
-F:	include/linux/rtc.h
+F:	drivers/char/rtc.c
 
 REAL TIME CLOCK (RTC) SUBSYSTEM
 M:	Alessandro Zummo <a.zummo@towertech.it>
@@ -4804,8 +4996,8 @@ F:	net/rfkill/
 RICOH SMARTMEDIA/XD DRIVER
 M:	Maxim Levitsky <maximlevitsky@gmail.com>
 S:	Maintained
-F:	drivers/mtd/nand/r822.c
-F:	drivers/mtd/nand/r822.h
+F:	drivers/mtd/nand/r852.c
+F:	drivers/mtd/nand/r852.h
 
 RISCOM8 DRIVER
 S:	Orphan
@@ -4918,6 +5110,12 @@ F:	drivers/media/common/saa7146*
 F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
+SAMSUNG AUDIO (ASoC) DRIVERS
+M:	Jassi Brar <jassi.brar@samsung.com>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Supported
+F:	sound/soc/s3c24xx
+
 TLG2300 VIDEO4LINUX-2 DRIVER
 M:	Huang Shijie <shijie8@gmail.com>
 M:	Kang Yong <kangyong@telegent.com>
@@ -4951,6 +5149,16 @@ W:	http://www.kernel.dk
 S:	Maintained
 F:	drivers/scsi/sr*
 
+SCSI RDMA PROTOCOL (SRP) INITIATOR
+M:	David Dillow <dillowda@ornl.gov>
+L:	linux-rdma@vger.kernel.org
+S:	Supported
+W:	http://www.openfabrics.org
+Q:	http://patchwork.kernel.org/project/linux-rdma/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dad/srp-initiator.git
+F:	drivers/infiniband/ulp/srp/
+F:	include/scsi/srp.h
+
 SCSI SG DRIVER
 M:	Doug Gilbert <dgilbert@interlog.com>
 L:	linux-scsi@vger.kernel.org
@@ -5015,13 +5223,15 @@ S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-S:	Orphan
+M:	Chris Ball <cjb@laptop.org>
 L:	linux-mmc@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+S:	Maintained
 F:	drivers/mmc/host/sdhci.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
 M:	Anton Vorontsov <avorontsov@ru.mvista.com>
-L:	linuxppc-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
 L:	linux-mmc@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/sdhci-of.*
@@ -5061,6 +5271,14 @@ S:	Supported
 F:	include/linux/selinux*
 F:	security/selinux/
 
+APPARMOR SECURITY MODULE
+M:	John Johansen <john.johansen@canonical.com>
+L:	apparmor@lists.ubuntu.com (subscribers-only, general discussion)
+W:	apparmor.wiki.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git
+S:	Supported
+F:	security/apparmor/
+
 SENSABLE PHANTOM
 M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
@@ -5163,8 +5381,8 @@ F:	drivers/*/*s3c2410*
 F:	drivers/*/*/*s3c2410*
 
 TI DAVINCI MACHINE SUPPORT
-P:	Kevin Hilman
-M:	davinci-linux-open-source@linux.davincidsp.com
+M:	Kevin Hilman <khilman@deeprootsystems.com>
+L:	davinci-linux-open-source@linux.davincidsp.com (subscribers-only)
 Q:	http://patchwork.kernel.org/project/linux-davinci/list/
 S:	Supported
 F:	arch/arm/mach-davinci
@@ -5224,6 +5442,20 @@ M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Odd Fixes
 F:	drivers/net/smc91x.*
 
+SMM665 HARDWARE MONITOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/smm665
+F:	drivers/hwmon/smm665.c
+
+SMSC EMC2103 HARDWARE MONITOR DRIVER
+M:	Steve Glendinning <steve.glendinning@smsc.com>
+L:	lm-sensors@lm-sensors.org
+S:	Supported
+F:	Documentation/hwmon/emc2103
+F:	drivers/hwmon/emc2103.c
+
 SMSC47B397 HARDWARE MONITOR DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	lm-sensors@lm-sensors.org
@@ -5244,11 +5476,6 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/smsc9420.*
 
-SMX UIO Interface
-M:	Ben Nizette <bn@niasdigital.com>
-S:	Maintained
-F:	drivers/uio/uio_smx.c
-
 SN-IA64 (Itanium) SUB-PLATFORM
 M:	Jes Sorensen <jes@sgi.com>
 L:	linux-altix@sgi.com
@@ -5336,7 +5563,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
 S:	Maintained
 F:	arch/sparc/
-F:	drivers/sbus
+F:	drivers/sbus/
 
 SPARC SERIAL DRIVERS
 M:	"David S. Miller" <davem@davemloft.net>
@@ -5378,7 +5605,8 @@ S:	Maintained
 F:	arch/arm/mach-spear*/clock.c
 F:	arch/arm/mach-spear*/include/mach/clkdev.h
 F:	arch/arm/plat-spear/clock.c
-F:	arch/arm/plat-spear/include/plat/clock.h and clkdev.h
+F:	arch/arm/plat-spear/include/plat/clkdev.h
+F:	arch/arm/plat-spear/include/plat/clock.h
 
 SPEAR PAD MULTIPLEXING SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
@@ -5420,8 +5648,8 @@ F:	drivers/net/spider_net*
 
 SPU FILE SYSTEM
 M:	Jeremy Kerr <jk@ozlabs.org>
-L:	linuxppc-dev@ozlabs.org
-L:	cbe-oss-dev@ozlabs.org
+L:	linuxppc-dev@lists.ozlabs.org
+L:	cbe-oss-dev@lists.ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
 S:	Supported
 F:	Documentation/filesystems/spufs.txt
@@ -5448,7 +5676,7 @@ S:	Maintained
 
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@suse.de>
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6.git
 L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/
@@ -5458,11 +5686,6 @@ M:	Ion Badulescu <ionut@badula.org>
 S:	Odd Fixes
 F:	drivers/net/starfire*
 
-STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
-S:	Orphan
-F:	drivers/staging/strip/strip.c
-F:	include/linux/if_strip.h
-
 STRADIS MPEG-2 DECODER DRIVER
 M:	Nathan Laredo <laredo@gnu.org>
 W:	http://www.stradis.com/
@@ -5538,6 +5761,15 @@ W:	http://tcp-lp-mod.sourceforge.net/
 S:	Maintained
 F:	net/ipv4/tcp_lp.c
 
+TEGRA SUPPORT
+M:	Colin Cross <ccross@android.com>
+M:	Erik Gilling <konkers@android.com>
+M:	Olof Johansson <olof@lixom.net>
+L:	linux-tegra@vger.kernel.org
+T:	git git://android.git.kernel.org/kernel/tegra.git
+S:	Supported
+F:	arch/arm/mach-tegra
+
 TEHUTI ETHERNET DRIVER
 M:	Alexander Indenbaum <baum@tehutinetworks.net>
 M:	Andy Gospodarek <andy@greyhouse.net>
@@ -5590,6 +5822,12 @@ F:	include/linux/tipc*.h
 F:	include/net/tipc/
 F:	net/tipc/
 
+TILE ARCHITECTURE
+M:	Chris Metcalf <cmetcalf@tilera.com>
+W:	http://www.tilera.com/scm/
+S:	Supported
+F:	arch/tile/
+
 TLAN NETWORK DRIVER
 M:	Samuel Chessman <chessman@tux.org>
 L:	tlan-devel@lists.sourceforge.net (subscribers-only)
@@ -5605,7 +5843,7 @@ L:	tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and us
 L:	tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
 L:	tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
 W:	http://tomoyo.sourceforge.jp/
-T:	quilt http://svn.sourceforge.jp/svnroot/tomoyo/trunk/2.2.x/tomoyo-lsm/patches/
+T:	quilt http://svn.sourceforge.jp/svnroot/tomoyo/trunk/2.3.x/tomoyo-lsm/patches/
 S:	Maintained
 F:	security/tomoyo/
 
@@ -5654,7 +5892,7 @@ TRACING
 M:	Steven Rostedt <rostedt@goodmis.org>
 M:	Frederic Weisbecker <fweisbec@gmail.com>
 M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git perf/core
 S:	Maintained
 F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
@@ -5727,6 +5965,9 @@ UCLINUX FOR RENESAS H8/300 (H8300)
 M:	Yoshinori Sato <ysato@users.sourceforge.jp>
 W:	http://uclinux-h8.sourceforge.jp/
 S:	Supported
+F:	arch/h8300/
+F:	drivers/ide/ide-h8300.c
+F:	drivers/net/ne-h8300.c
 
 UDF FILESYSTEM
 M:	Jan Kara <jack@suse.cz>
@@ -5742,13 +5983,9 @@ F:	Documentation/filesystems/ufs.txt
 F:	fs/ufs/
 
 ULTRA-WIDEBAND (UWB) SUBSYSTEM:
-M:	David Vrabel <david.vrabel@csr.com>
 L:	linux-usb@vger.kernel.org
-S:	Supported
+S:	Orphan
 F:	drivers/uwb/
-X:	drivers/uwb/wlp/
-X:	drivers/uwb/i1480/i1480u-wlp/
-X:	drivers/uwb/i1480/i1480-wlp.h
 F:	include/linux/uwb.h
 F:	include/linux/uwb/
 
@@ -5783,6 +6020,14 @@ S:	Maintained
 F:	Documentation/usb/acm.txt
 F:	drivers/usb/class/cdc-acm.*
 
+USB ATTACHED SCSI
+M:	Matthew Wilcox <willy@linux.intel.com>
+M:	Sarah Sharp <sarah.a.sharp@linux.intel.com>
+L:	linux-usb@vger.kernel.org
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+F:	drivers/usb/storage/uas.c
+
 USB BLOCK DRIVER (UB ub)
 M:	Pete Zaitcev <zaitcev@redhat.com>
 L:	linux-usb@vger.kernel.org
@@ -5882,13 +6127,6 @@ L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/option.c
 
-USB OV511 DRIVER
-M:	Mark McClelland <mmcclell@bigfoot.com>
-L:	linux-usb@vger.kernel.org
-W:	http://alpha.dyndns.org/ov511/
-S:	Maintained
-F:	drivers/media/video/ov511.*
-
 USB PEGASUS DRIVER
 M:	Petko Manolov <petkan@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
@@ -6018,7 +6256,7 @@ F:	drivers/net/usb/usbnet.c
 F:	include/linux/usb/usbnet.h
 
 USB VIDEO CLASS
-M:	Laurent Pinchart <laurent.pinchart@skynet.be>
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-uvc-devel@lists.berlios.de (subscribers-only)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6049,21 +6287,10 @@ S:	Supported
 F:	drivers/usb/host/xhci*
 F:	drivers/usb/host/pci-quirks*
 
-USB ZC0301 DRIVER
-M:	Luca Risolia <luca.risolia@studio.unibo.it>
-L:	linux-usb@vger.kernel.org
-L:	linux-media@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
-W:	http://www.linux-projects.org
-S:	Maintained
-F:	Documentation/video4linux/zc0301.txt
-F:	drivers/media/video/zc0301/
-
 USB ZD1201 DRIVER
-M:	Jeroen Vreeken <pe1rxq@amsat.org>
-L:	linux-usb@vger.kernel.org
+L:	linux-wireless@vger.kernel.org
 W:	http://linux-lc100020.sourceforge.net
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/zd1201.*
 
 USB ZR364XX DRIVER
@@ -6152,9 +6379,12 @@ F:	drivers/mmc/host/via-sdmmc.c
 
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
 M:	Joseph Chan <JosephChan@via.com.tw>
-M:	Scott Fang <ScottFang@viatech.com.cn>
+M:	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
+F:	include/linux/via-core.h
+F:	include/linux/via-gpio.h
+F:	include/linux/via_i2c.h
 F:	drivers/video/via/
 
 VIA VELOCITY NETWORK DRIVER
@@ -6236,6 +6466,12 @@ S:	Maintained
 F:	Documentation/hwmon/w83793
 F:	drivers/hwmon/w83793.c
 
+W83795 HARDWARE MONITORING DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	drivers/hwmon/w83795.c
+
 W83L51xD SD/MMC CARD INTERFACE DRIVER
 M:	Pierre Ossman <pierre@ossman.eu>
 S:	Maintained
@@ -6251,14 +6487,6 @@ F:	Documentation/watchdog/
 F:	drivers/watchdog/
 F:	include/linux/watchdog.h
 
-WAVELAN NETWORK DRIVER & WIRELESS EXTENSIONS
-M:	Jean Tourrilhes <jt@hpl.hp.com>
-L:	linux-wireless@vger.kernel.org
-W:	http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
-S:	Maintained
-F:	Documentation/networking/wavelan.txt
-F:	drivers/staging/wavelan/
-
 WD7000 SCSI DRIVER
 M:	Miroslav Zagorac <zaga@fly.cc.fer.hr>
 L:	linux-scsi@vger.kernel.org
@@ -6276,15 +6504,11 @@ M:	linux-wimax@intel.com
 L:	wimax@linuxwimax.org
 S:	Supported
 W:	http://linuxwimax.org
-
-WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM
-M:	David Vrabel <david.vrabel@csr.com>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	include/linux/wlp.h
-F:	drivers/uwb/wlp/
-F:	drivers/uwb/i1480/i1480u-wlp/
-F:	drivers/uwb/i1480/i1480-wlp.h
+F:	Documentation/wimax/README.wimax
+F:	include/linux/wimax.h
+F:	include/linux/wimax/debug.h
+F:	include/net/wimax.h
+F:	net/wimax/
 
 WISTRON LAPTOP BUTTON DRIVER
 M:	Miloslav Trmac <mitr@volny.cz>
@@ -6292,21 +6516,21 @@ S:	Maintained
 F:	drivers/input/misc/wistron_btns.c
 
 WL1251 WIRELESS DRIVER
-M:	Kalle Valo <kalle.valo@iki.fi>
+M:	Kalle Valo <kvalo@adurom.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 S:	Maintained
-F:	drivers/net/wireless/wl12xx/*
-X:	drivers/net/wireless/wl12xx/wl1271*
+F:	drivers/net/wireless/wl1251/*
 
 WL1271 WIRELESS DRIVER
 M:	Luciano Coelho <luciano.coelho@nokia.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
 S:	Maintained
 F:	drivers/net/wireless/wl12xx/wl1271*
+F:	include/linux/wl12xx.h
 
 WL3501 WIRELESS PCMCIA CARD DRIVER
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
@@ -6325,10 +6549,13 @@ S:	Supported
 F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
-WOLFSON MICROELECTRONICS PMIC DRIVERS
+WOLFSON MICROELECTRONICS DRIVERS
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+M:	Ian Lartey <ian@opensource.wolfsonmicro.com>
+M:	Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
+T:	git git://opensource.wolfsonmicro.com/linux-2.6-asoc
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
-W:	http://opensource.wolfsonmicro.com/node/8
+W:	http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
 S:	Supported
 F:	Documentation/hwmon/wm83??
 F:	drivers/leds/leds-wm83*.c
@@ -6341,8 +6568,8 @@ F:	drivers/watchdog/wm83*_wdt.c
 F:	include/linux/mfd/wm831x/
 F:	include/linux/mfd/wm8350/
 F:	include/linux/mfd/wm8400*
-F:	sound/soc/codecs/wm8350.*
-F:	sound/soc/codecs/wm8400.*
+F:	include/sound/wm????.h
+F:	sound/soc/codecs/wm*
 
 X.25 NETWORK LAYER
 M:	Andrew Hendry <andrew.hendry@gmail.com>
@@ -6369,11 +6596,25 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.
 S:	Maintained
 F:	drivers/platform/x86
 
+XEN PCI SUBSYSTEM
+M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+L:	xen-devel@lists.xensource.com
+S:	Supported
+F:	arch/x86/pci/*xen*
+F:	drivers/pci/*xen*
+
+XEN SWIOTLB SUBSYSTEM
+M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+L:	xen-devel@lists.xensource.com
+S:	Supported
+F:	arch/x86/xen/*swiotlb*
+F:	drivers/xen/*swiotlb*
+
 XEN HYPERVISOR INTERFACE
-M:	Jeremy Fitzhardinge <jeremy@xensource.com>
-M:	Chris Wright <chrisw@sous-sol.org>
+M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
+M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+L:	xen-devel@lists.xen.org
 L:	virtualization@lists.osdl.org
-L:	xen-devel@lists.xensource.com
 S:	Supported
 F:	arch/x86/xen/
 F:	drivers/*/xen-*front.c
@@ -6450,6 +6691,20 @@ M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/serial/zs.*
 
+GRE DEMULTIPLEXER DRIVER
+M:	Dmitry Kozlov <xeb@mail.ru>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	net/ipv4/gre.c
+F:	include/net/gre.h
+
+PPTP DRIVER
+M:	Dmitry Kozlov <xeb@mail.ru>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/pptp.c
+W:	http://sourceforge.net/projects/accel-pptp
+
 THE REST
 M:	Linus Torvalds <torvalds@linux-foundation.org>
 L:	linux-kernel@vger.kernel.org
diff --git a/Makefile b/Makefile
index edfa6cf7cb94..6619720f50dd 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 35
-EXTRAVERSION =
-NAME = Sheep on Meth
+SUBLEVEL = 37
+EXTRAVERSION = -rc1
+NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -204,6 +204,9 @@ ifeq ($(ARCH),x86_64)
 endif
 
 # Additional ARCH settings for sparc
+ifeq ($(ARCH),sparc32)
+       SRCARCH := sparc
+endif
 ifeq ($(ARCH),sparc64)
        SRCARCH := sparc
 endif
@@ -417,9 +420,9 @@ endif
 # of make so .config is not included in this case either (for *config).
 
 no-dot-config-targets := clean mrproper distclean \
-			 cscope TAGS tags help %docs check% \
+			 cscope TAGS tags help %docs check% coccicheck \
 			 include/linux/version.h headers_% \
-			 kernelversion
+			 kernelversion %src-pkg
 
 config-targets := 0
 mixed-targets  := 0
@@ -531,7 +534,7 @@ endif # $(dot-config)
 # The all: target is the default when no target is given on the
 # command line.
 # This allow a user to issue only 'make' to build a kernel including modules
-# Defaults vmlinux but it is usually overridden in the arch makefile
+# Defaults to vmlinux, but the arch makefile usually adds further targets
 all: vmlinux
 
 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
@@ -554,8 +557,15 @@ endif
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
 else
+# Some targets (ARM with Thumb2, for example), can't be built with frame
+# pointers.  For those, we don't have FUNCTION_TRACER automatically
+# select FRAME_POINTER.  However, FUNCTION_TRACER adds -pg, and this is
+# incompatible with -fomit-frame-pointer with current GCC, so we don't use
+# -fomit-frame-pointer with FUNCTION_TRACER.
+ifndef CONFIG_FUNCTION_TRACER
 KBUILD_CFLAGS	+= -fomit-frame-pointer
 endif
+endif
 
 ifdef CONFIG_DEBUG_INFO
 KBUILD_CFLAGS	+= -g
@@ -568,6 +578,12 @@ endif
 
 ifdef CONFIG_FUNCTION_TRACER
 KBUILD_CFLAGS	+= -pg
+ifdef CONFIG_DYNAMIC_FTRACE
+	ifdef CONFIG_HAVE_C_RECORDMCOUNT
+		BUILD_C_RECORDMCOUNT := y
+		export BUILD_C_RECORDMCOUNT
+	endif
+endif
 endif
 
 # We trigger additional mismatches with less inlining
@@ -591,6 +607,11 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 # conserve stack if available
 KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 
+# check for 'asm goto'
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
+endif
+
 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 # But warn user when we do so
 warn-assign = \
@@ -1159,6 +1180,8 @@ distclean: mrproper
 # rpm target kept for backward compatibility
 package-dir	:= $(srctree)/scripts/package
 
+%src-pkg: FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
 %pkg: include/config/kernel.release FORCE
 	$(Q)$(MAKE) $(build)=$(package-dir) $@
 rpm: include/config/kernel.release FORCE
@@ -1210,8 +1233,9 @@ help:
 	@echo  '  includecheck    - Check for duplicate included header files'
 	@echo  '  export_report   - List the usages of all exported symbols'
 	@echo  '  headers_check   - Sanity check on exported headers'
-	@echo  '  headerdep       - Detect inclusion cycles in headers'; \
-	 echo  ''
+	@echo  '  headerdep       - Detect inclusion cycles in headers'
+	@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
+	@echo  ''
 	@echo  'Kernel packaging:'
 	@$(MAKE) $(build)=$(package-dir) help
 	@echo  ''
@@ -1371,6 +1395,9 @@ versioncheck:
 		-name '*.[hcS]' -type f -print | sort \
 		| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
 
+coccicheck:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
+
 namespacecheck:
 	$(PERL) $(srctree)/scripts/namespace.pl
 
@@ -1395,8 +1422,8 @@ checkstack:
 	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
 	$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
 
-kernelrelease: include/config/kernel.release
-	@echo $(KERNELRELEASE)
+kernelrelease:
+	@echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
 
 kernelversion:
 	@echo $(KERNELVERSION)
diff --git a/README b/README
index 737838fe73cc..1b81d2836873 100644
--- a/README
+++ b/README
@@ -166,6 +166,7 @@ CONFIGURING the kernel:
  - Alternate configuration commands are:
 	"make config"      Plain text interface.
 	"make menuconfig"  Text based color menus, radiolists & dialogs.
+	"make nconfig"     Enhanced text based color menus.
 	"make xconfig"     X windows (Qt) based configuration tool.
 	"make gconfig"     X windows (Gtk) based configuration tool.
 	"make oldconfig"   Default all questions based on the contents of
diff --git a/arch/Kconfig b/arch/Kconfig
index acda512da2e2..8bf0fa652eb6 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -32,8 +32,9 @@ config HAVE_OPROFILE
 
 config KPROBES
 	bool "Kprobes"
-	depends on KALLSYMS && MODULES
+	depends on MODULES
 	depends on HAVE_KPROBES
+	select KALLSYMS
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
@@ -41,11 +42,24 @@ config KPROBES
 	  for kernel debugging, non-intrusive instrumentation and testing.
 	  If in doubt, say "N".
 
+config JUMP_LABEL
+       bool "Optimize trace point call sites"
+       depends on HAVE_ARCH_JUMP_LABEL
+       help
+         If it is detected that the compiler has support for "asm goto",
+	 the kernel will compile trace point locations with just a
+	 nop instruction. When trace points are enabled, the nop will
+	 be converted to a jump to the trace function. This technique
+	 lowers overhead and stress on the branch prediction of the
+	 processor.
+
+	 On i386, options added to the compiler flags may increase
+	 the size of the kernel slightly.
+
 config OPTPROBES
 	def_bool y
 	depends on KPROBES && HAVE_OPTPROBES
 	depends on !PREEMPT
-	select KALLSYMS_ALL
 
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool
@@ -151,4 +165,14 @@ config HAVE_MIXED_BREAKPOINTS_REGS
 config HAVE_USER_RETURN_NOTIFIER
 	bool
 
+config HAVE_PERF_EVENTS_NMI
+	bool
+	help
+	  System hardware can generate an NMI using the perf event
+	  subsystem.  Also has support for calculating CPU cycle events
+	  to determine how many clock cycles in a given period.
+
+config HAVE_ARCH_JUMP_LABEL
+	bool
+
 source "kernel/gcov/Kconfig"
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 3e2e540a0f2a..943fe6930f77 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -1,7 +1,3 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
 config ALPHA
 	bool
 	default y
@@ -9,6 +5,7 @@ config ALPHA
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS
+	select HAVE_IRQ_WORK
 	select HAVE_PERF_EVENTS
 	select HAVE_DMA_ATTRS
 	help
@@ -47,10 +44,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config GENERIC_TIME
-	bool
-	default y
-
 config GENERIC_CMOS_UPDATE
         def_bool y
 
@@ -58,6 +51,9 @@ config ZONE_DMA
 	bool
 	default y
 
+config ARCH_DMA_ADDR_T_64BIT
+	def_bool y
+
 config NEED_DMA_MAP_STATE
        def_bool y
 
diff --git a/arch/alpha/defconfig b/arch/alpha/defconfig
index e43f68fd66b0..539e8b5a6cbd 100644
--- a/arch/alpha/defconfig
+++ b/arch/alpha/defconfig
@@ -1,926 +1,76 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.9-rc2
-# Sat Sep 25 15:38:35 2004
-#
-CONFIG_ALPHA=y
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_GENERIC_IOMAP is not set
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
+CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# System setup
-#
-CONFIG_ALPHA_GENERIC=y
-# CONFIG_ALPHA_ALCOR is not set
-# CONFIG_ALPHA_XL is not set
-# CONFIG_ALPHA_BOOK1 is not set
-# CONFIG_ALPHA_AVANTI_CH is not set
-# CONFIG_ALPHA_CABRIOLET is not set
-# CONFIG_ALPHA_DP264 is not set
-# CONFIG_ALPHA_EB164 is not set
-# CONFIG_ALPHA_EB64P_CH is not set
-# CONFIG_ALPHA_EB66 is not set
-# CONFIG_ALPHA_EB66P is not set
-# CONFIG_ALPHA_EIGER is not set
-# CONFIG_ALPHA_JENSEN is not set
-# CONFIG_ALPHA_LX164 is not set
-# CONFIG_ALPHA_LYNX is not set
-# CONFIG_ALPHA_MARVEL is not set
-# CONFIG_ALPHA_MIATA is not set
-# CONFIG_ALPHA_MIKASA is not set
-# CONFIG_ALPHA_NAUTILUS is not set
-# CONFIG_ALPHA_NONAME_CH is not set
-# CONFIG_ALPHA_NORITAKE is not set
-# CONFIG_ALPHA_PC164 is not set
-# CONFIG_ALPHA_P2K is not set
-# CONFIG_ALPHA_RAWHIDE is not set
-# CONFIG_ALPHA_RUFFIAN is not set
-# CONFIG_ALPHA_RX164 is not set
-# CONFIG_ALPHA_SX164 is not set
-# CONFIG_ALPHA_SABLE is not set
-# CONFIG_ALPHA_SHARK is not set
-# CONFIG_ALPHA_TAKARA is not set
-# CONFIG_ALPHA_TITAN is not set
-# CONFIG_ALPHA_WILDFIRE is not set
-CONFIG_ISA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_ALPHA_CORE_AGP=y
-CONFIG_ALPHA_BROKEN_IRQ_MASK=y
-CONFIG_EISA=y
-# CONFIG_SMP is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_VERBOSE_MCHECK=y
-CONFIG_VERBOSE_MCHECK_ON=1
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-CONFIG_EISA_PCI_EISA=y
-CONFIG_EISA_VIRTUAL_ROOT=y
-CONFIG_EISA_NAMES=y
 CONFIG_SRM_ENV=m
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_EM86 is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_VLAN_8021Q=m
 CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
 CONFIG_ISAPNP=y
-
-#
-# Block devices
-#
 CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
 CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
 CONFIG_BLK_DEV_ALI15X3=y
-# CONFIG_WDC_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
 CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
 CONFIG_BLK_DEV_CY82C693=y
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
 CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
-# CONFIG_SCSI_AACRAID is not set
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
-CONFIG_AIC7XXX_RESET_DELAY_MS=5000
-# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_SIM710 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-# CONFIG_IP_NF_MATCH_HELPER is not set
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-CONFIG_IP_NF_COMPAT_IPCHAINS=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
 CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_3C515 is not set
 CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
 CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
 CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
 CONFIG_YELLOWFIN=y
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_OSF_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_SEMAPHORE is not set
 CONFIG_ALPHA_LEGACY_START_ADDRESS=y
 CONFIG_MATHEMU=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WHIRLPOOL is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index b7c8f188b313..e423defed91e 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -1,11 +1,10 @@
 include include/asm-generic/Kbuild.asm
 
+header-y += compiler.h
+header-y += console.h
+header-y += fpu.h
 header-y += gentrap.h
-header-y += regdef.h
 header-y += pal.h
 header-y += reg.h
-
-unifdef-y += console.h
-unifdef-y += fpu.h
-unifdef-y += sysinfo.h
-unifdef-y += compiler.h
+header-y += regdef.h
+header-y += sysinfo.h
diff --git a/arch/alpha/include/asm/cache.h b/arch/alpha/include/asm/cache.h
index f199e69a5d0b..ad368a93a46a 100644
--- a/arch/alpha/include/asm/cache.h
+++ b/arch/alpha/include/asm/cache.h
@@ -17,7 +17,6 @@
 # define L1_CACHE_SHIFT     5
 #endif
 
-#define L1_CACHE_ALIGN(x)  (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
 #define SMP_CACHE_BYTES    L1_CACHE_BYTES
 
 #endif
diff --git a/arch/alpha/include/asm/cacheflush.h b/arch/alpha/include/asm/cacheflush.h
index 01d71e1c8a9e..012f1243b1c1 100644
--- a/arch/alpha/include/asm/cacheflush.h
+++ b/arch/alpha/include/asm/cacheflush.h
@@ -43,6 +43,8 @@ extern void smp_imb(void);
 /* ??? Ought to use this in arch/alpha/kernel/signal.c too.  */
 
 #ifndef CONFIG_SMP
+#include <linux/sched.h>
+
 extern void __load_new_mm_context(struct mm_struct *);
 static inline void
 flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h
index 21ac53383b37..9f67a056b461 100644
--- a/arch/alpha/include/asm/core_mcpcia.h
+++ b/arch/alpha/include/asm/core_mcpcia.h
@@ -247,7 +247,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck {
 #define vip	volatile int __force *
 #define vuip	volatile unsigned int __force *
 
-#ifdef MCPCIA_ONE_HAE_WINDOW
+#ifndef MCPCIA_ONE_HAE_WINDOW
 #define MCPCIA_FROB_MMIO						\
 	if (__mcpcia_is_mmio(hose)) {					\
 		set_hae(hose & 0xffffffff);				\
diff --git a/arch/alpha/include/asm/core_t2.h b/arch/alpha/include/asm/core_t2.h
index 471c07292e0b..91b46801b290 100644
--- a/arch/alpha/include/asm/core_t2.h
+++ b/arch/alpha/include/asm/core_t2.h
@@ -1,6 +1,9 @@
 #ifndef __ALPHA_T2__H__
 #define __ALPHA_T2__H__
 
+/* Fit everything into one 128MB HAE window. */
+#define T2_ONE_HAE_WINDOW 1
+
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <asm/compiler.h>
@@ -19,7 +22,7 @@
  *
  */
 
-#define T2_MEM_R1_MASK 0x07ffffff  /* Mem sparse region 1 mask is 26 bits */
+#define T2_MEM_R1_MASK 0x07ffffff  /* Mem sparse region 1 mask is 27 bits */
 
 /* GAMMA-SABLE is a SABLE with EV5-based CPUs */
 /* All LYNX machines, EV4 or EV5, use the GAMMA bias also */
@@ -85,7 +88,9 @@
 #define T2_DIR			(IDENT_ADDR + GAMMA_BIAS + 0x38e0004a0UL)
 #define T2_ICE			(IDENT_ADDR + GAMMA_BIAS + 0x38e0004c0UL)
 
+#ifndef T2_ONE_HAE_WINDOW
 #define T2_HAE_ADDRESS		T2_HAE_1
+#endif
 
 /*  T2 CSRs are in the non-cachable primary IO space from 3.8000.0000 to
  3.8fff.ffff
@@ -429,13 +434,15 @@ extern inline void t2_outl(u32 b, unsigned long addr)
  *
  */
 
+#ifdef T2_ONE_HAE_WINDOW
+#define t2_set_hae
+#else
 #define t2_set_hae { \
-	msb = addr  >> 27; \
+	unsigned long msb = addr >> 27; \
 	addr &= T2_MEM_R1_MASK; \
 	set_hae(msb); \
 }
-
-extern raw_spinlock_t t2_hae_lock;
+#endif
 
 /*
  * NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since
@@ -446,28 +453,22 @@ extern raw_spinlock_t t2_hae_lock;
 __EXTERN_INLINE u8 t2_readb(const volatile void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long result, msb;
-	unsigned long flags;
-	raw_spin_lock_irqsave(&t2_hae_lock, flags);
+	unsigned long result;
 
 	t2_set_hae;
 
 	result = *(vip) ((addr << 5) + T2_SPARSE_MEM + 0x00);
-	raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
 	return __kernel_extbl(result, addr & 3);
 }
 
 __EXTERN_INLINE u16 t2_readw(const volatile void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long result, msb;
-	unsigned long flags;
-	raw_spin_lock_irqsave(&t2_hae_lock, flags);
+	unsigned long result;
 
 	t2_set_hae;
 
 	result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08);
-	raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
 	return __kernel_extwl(result, addr & 3);
 }
 
@@ -478,59 +479,47 @@ __EXTERN_INLINE u16 t2_readw(const volatile void __iomem *xaddr)
 __EXTERN_INLINE u32 t2_readl(const volatile void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long result, msb;
-	unsigned long flags;
-	raw_spin_lock_irqsave(&t2_hae_lock, flags);
+	unsigned long result;
 
 	t2_set_hae;
 
 	result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18);
-	raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
 	return result & 0xffffffffUL;
 }
 
 __EXTERN_INLINE u64 t2_readq(const volatile void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long r0, r1, work, msb;
-	unsigned long flags;
-	raw_spin_lock_irqsave(&t2_hae_lock, flags);
+	unsigned long r0, r1, work;
 
 	t2_set_hae;
 
 	work = (addr << 5) + T2_SPARSE_MEM + 0x18;
 	r0 = *(vuip)(work);
 	r1 = *(vuip)(work + (4 << 5));
-	raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
 	return r1 << 32 | r0;
 }
 
 __EXTERN_INLINE void t2_writeb(u8 b, volatile void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long msb, w;
-	unsigned long flags;
-	raw_spin_lock_irqsave(&t2_hae_lock, flags);
+	unsigned long w;
 
 	t2_set_hae;
 
 	w = __kernel_insbl(b, addr & 3);
 	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x00) = w;
-	raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
 }
 
 __EXTERN_INLINE void t2_writew(u16 b, volatile void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long msb, w;
-	unsigned long flags;
-	raw_spin_lock_irqsave(&t2_hae_lock, flags);
+	unsigned long w;
 
 	t2_set_hae;
 
 	w = __kernel_inswl(b, addr & 3);
 	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08) = w;
-	raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
 }
 
 /*
@@ -540,29 +529,22 @@ __EXTERN_INLINE void t2_writew(u16 b, volatile void __iomem *xaddr)
 __EXTERN_INLINE void t2_writel(u32 b, volatile void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long msb;
-	unsigned long flags;
-	raw_spin_lock_irqsave(&t2_hae_lock, flags);
 
 	t2_set_hae;
 
 	*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18) = b;
-	raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
 }
 
 __EXTERN_INLINE void t2_writeq(u64 b, volatile void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr - T2_DENSE_MEM;
-	unsigned long msb, work;
-	unsigned long flags;
-	raw_spin_lock_irqsave(&t2_hae_lock, flags);
+	unsigned long work;
 
 	t2_set_hae;
 
 	work = (addr << 5) + T2_SPARSE_MEM + 0x18;
 	*(vuip)work = b;
 	*(vuip)(work + (4 << 5)) = b >> 32;
-	raw_spin_unlock_irqrestore(&t2_hae_lock, flags);
 }
 
 __EXTERN_INLINE void __iomem *t2_ioportmap(unsigned long addr)
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index 1bce8169733c..4567aca6fdd6 100644
--- a/arch/alpha/include/asm/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -41,9 +41,7 @@ static inline int dma_set_mask(struct device *dev, u64 mask)
 
 #define dma_alloc_noncoherent(d, s, h, f)	dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h)	dma_free_coherent(d, s, v, h)
-#define dma_is_consistent(d, h)			(1)
 
 #define dma_cache_sync(dev, va, size, dir)		  ((void)0)
-#define dma_get_cache_alignment()			  L1_CACHE_BYTES
 
 #endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/arch/alpha/include/asm/hw_irq.h b/arch/alpha/include/asm/hw_irq.h
index a37db0f95092..5050ac81cd90 100644
--- a/arch/alpha/include/asm/hw_irq.h
+++ b/arch/alpha/include/asm/hw_irq.h
@@ -3,6 +3,7 @@
 
 
 extern volatile unsigned long irq_err_count;
+DECLARE_PER_CPU(unsigned long, irq_pmi_count);
 
 #ifdef CONFIG_ALPHA_GENERIC
 #define ACTUAL_NR_IRQS	alpha_mv.nr_irqs
diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h
index 67bb9f6fdbe4..59617c3c2be6 100644
--- a/arch/alpha/include/asm/ioctls.h
+++ b/arch/alpha/include/asm/ioctls.h
@@ -80,6 +80,7 @@
 # define TIOCPKT_START		 8
 # define TIOCPKT_NOSTOP		16
 # define TIOCPKT_DOSTOP		32
+# define TIOCPKT_IOCTL		64
 
 
 #define TIOCNOTTY	0x5422
@@ -91,6 +92,7 @@
 #define TIOCGSID	0x5429  /* Return the session ID of FD */
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	0x5453
 #define TIOCSERGWILD	0x5454
@@ -106,7 +108,5 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
 
 #endif /* _ASM_ALPHA_IOCTLS_H */
diff --git a/arch/alpha/include/asm/irqflags.h b/arch/alpha/include/asm/irqflags.h
new file mode 100644
index 000000000000..299bbc7e9d71
--- /dev/null
+++ b/arch/alpha/include/asm/irqflags.h
@@ -0,0 +1,67 @@
+#ifndef __ALPHA_IRQFLAGS_H
+#define __ALPHA_IRQFLAGS_H
+
+#include <asm/system.h>
+
+#define IPL_MIN		0
+#define IPL_SW0		1
+#define IPL_SW1		2
+#define IPL_DEV0	3
+#define IPL_DEV1	4
+#define IPL_TIMER	5
+#define IPL_PERF	6
+#define IPL_POWERFAIL	6
+#define IPL_MCHECK	7
+#define IPL_MAX		7
+
+#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
+#undef IPL_MIN
+#define IPL_MIN		__min_ipl
+extern int __min_ipl;
+#endif
+
+#define getipl()		(rdps() & 7)
+#define setipl(ipl)		((void) swpipl(ipl))
+
+static inline unsigned long arch_local_save_flags(void)
+{
+	return rdps();
+}
+
+static inline void arch_local_irq_disable(void)
+{
+	setipl(IPL_MAX);
+	barrier();
+}
+
+static inline unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags = swpipl(IPL_MAX);
+	barrier();
+	return flags;
+}
+
+static inline void arch_local_irq_enable(void)
+{
+	barrier();
+	setipl(IPL_MIN);
+}
+
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+	barrier();
+	setipl(flags);
+	barrier();
+}
+
+static inline bool arch_irqs_disabled_flags(unsigned long flags)
+{
+	return flags == IPL_MAX;
+}
+
+static inline bool arch_irqs_disabled(void)
+{
+	return arch_irqs_disabled_flags(getipl());
+}
+
+#endif /* __ALPHA_IRQFLAGS_H */
diff --git a/arch/alpha/include/asm/local64.h b/arch/alpha/include/asm/local64.h
new file mode 100644
index 000000000000..36c93b5cc239
--- /dev/null
+++ b/arch/alpha/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/alpha/include/asm/md.h b/arch/alpha/include/asm/md.h
deleted file mode 100644
index 6c9b8222a4f2..000000000000
--- a/arch/alpha/include/asm/md.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* $Id: md.h,v 1.1 1997/12/15 15:11:48 jj Exp $
- * md.h: High speed xor_block operation for RAID4/5 
- *
- */
- 
-#ifndef __ASM_MD_H
-#define __ASM_MD_H
-
-/* #define HAVE_ARCH_XORBLOCK */
-
-#define MD_XORBLOCK_ALIGNMENT	sizeof(long)
-
-#endif /* __ASM_MD_H */
diff --git a/arch/alpha/include/asm/perf_event.h b/arch/alpha/include/asm/perf_event.h
index 3bef8522017c..fe792ca818f6 100644
--- a/arch/alpha/include/asm/perf_event.h
+++ b/arch/alpha/include/asm/perf_event.h
@@ -1,9 +1,10 @@
 #ifndef __ASM_ALPHA_PERF_EVENT_H
 #define __ASM_ALPHA_PERF_EVENT_H
 
-/* Alpha only supports software events through this interface. */
-static inline void set_perf_event_pending(void) { }
-
-#define PERF_EVENT_INDEX_OFFSET 0
+#ifdef CONFIG_PERF_EVENTS
+extern void init_hw_perf_events(void);
+#else
+static inline void init_hw_perf_events(void)    { }
+#endif
 
 #endif /* __ASM_ALPHA_PERF_EVENT_H */
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 71a243294142..de98a732683d 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -318,9 +318,7 @@ extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address)
 }
 
 #define pte_offset_map(dir,addr)	pte_offset_kernel((dir),(addr))
-#define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir),(addr))
 #define pte_unmap(pte)			do { } while (0)
-#define pte_unmap_nested(pte)		do { } while (0)
 
 extern pgd_t swapper_pg_dir[1024];
 
diff --git a/arch/alpha/include/asm/scatterlist.h b/arch/alpha/include/asm/scatterlist.h
index 5728c52a7412..017d7471c3c4 100644
--- a/arch/alpha/include/asm/scatterlist.h
+++ b/arch/alpha/include/asm/scatterlist.h
@@ -3,6 +3,4 @@
 
 #include <asm-generic/scatterlist.h>
 
-#define ISA_DMA_THRESHOLD (~0UL)
-
 #endif /* !(_ALPHA_SCATTERLIST_H) */
diff --git a/arch/alpha/include/asm/system.h b/arch/alpha/include/asm/system.h
index 5aa40cca4f23..9f78e6934637 100644
--- a/arch/alpha/include/asm/system.h
+++ b/arch/alpha/include/asm/system.h
@@ -259,34 +259,6 @@ __CALL_PAL_RW2(wrperfmon, unsigned long, unsigned long, unsigned long);
 __CALL_PAL_W1(wrusp, unsigned long);
 __CALL_PAL_W1(wrvptptr, unsigned long);
 
-#define IPL_MIN		0
-#define IPL_SW0		1
-#define IPL_SW1		2
-#define IPL_DEV0	3
-#define IPL_DEV1	4
-#define IPL_TIMER	5
-#define IPL_PERF	6
-#define IPL_POWERFAIL	6
-#define IPL_MCHECK	7
-#define IPL_MAX		7
-
-#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
-#undef IPL_MIN
-#define IPL_MIN		__min_ipl
-extern int __min_ipl;
-#endif
-
-#define getipl()		(rdps() & 7)
-#define setipl(ipl)		((void) swpipl(ipl))
-
-#define local_irq_disable()			do { setipl(IPL_MAX); barrier(); } while(0)
-#define local_irq_enable()			do { barrier(); setipl(IPL_MIN); } while(0)
-#define local_save_flags(flags)	((flags) = rdps())
-#define local_irq_save(flags)	do { (flags) = swpipl(IPL_MAX); barrier(); } while(0)
-#define local_irq_restore(flags)	do { barrier(); setipl(flags); barrier(); } while(0)
-
-#define irqs_disabled()	(getipl() == IPL_MAX)
-
 /*
  * TB routines..
  */
diff --git a/arch/alpha/include/asm/termbits.h b/arch/alpha/include/asm/termbits.h
index ad854a4a3af6..879dd3589921 100644
--- a/arch/alpha/include/asm/termbits.h
+++ b/arch/alpha/include/asm/termbits.h
@@ -180,6 +180,7 @@ struct ktermios {
 #define FLUSHO	0x00800000
 #define PENDIN	0x20000000
 #define IEXTEN	0x00000400
+#define EXTPROC	0x10000000
 
 /* Values for the ACTION argument to `tcflow'.  */
 #define	TCOOFF		0
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 804e5311c841..058937bf5a77 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -449,10 +449,13 @@
 #define __NR_pwritev			491
 #define __NR_rt_tgsigqueueinfo		492
 #define __NR_perf_event_open		493
+#define __NR_fanotify_init		494
+#define __NR_fanotify_mark		495
+#define __NR_prlimit64			496
 
 #ifdef __KERNEL__
 
-#define NR_SYSCALLS			494
+#define NR_SYSCALLS			497
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
@@ -463,6 +466,7 @@
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 /* "Conditional" syscalls.  What we want is
 
diff --git a/arch/alpha/include/asm/wrperfmon.h b/arch/alpha/include/asm/wrperfmon.h
new file mode 100644
index 000000000000..319bf6788d87
--- /dev/null
+++ b/arch/alpha/include/asm/wrperfmon.h
@@ -0,0 +1,93 @@
+/*
+ * Definitions for use with the Alpha wrperfmon PAL call.
+ */
+
+#ifndef __ALPHA_WRPERFMON_H
+#define __ALPHA_WRPERFMON_H
+
+/* Following commands are implemented on all CPUs */
+#define PERFMON_CMD_DISABLE 0
+#define PERFMON_CMD_ENABLE 1
+#define PERFMON_CMD_DESIRED_EVENTS 2
+#define PERFMON_CMD_LOGGING_OPTIONS 3
+/* Following commands on EV5/EV56/PCA56 only */
+#define PERFMON_CMD_INT_FREQ 4
+#define PERFMON_CMD_ENABLE_CLEAR 7
+/* Following commands are on EV5 and better CPUs */
+#define PERFMON_CMD_READ 5
+#define PERFMON_CMD_WRITE 6
+/* Following command are on EV6 and better CPUs */
+#define PERFMON_CMD_ENABLE_WRITE 7
+/* Following command are on EV67 and better CPUs */
+#define PERFMON_CMD_I_STAT 8
+#define PERFMON_CMD_PMPC 9
+
+
+/* EV5/EV56/PCA56 Counters */
+#define EV5_PCTR_0 (1UL<<0)
+#define EV5_PCTR_1 (1UL<<1)
+#define EV5_PCTR_2 (1UL<<2)
+
+#define EV5_PCTR_0_COUNT_SHIFT 48
+#define EV5_PCTR_1_COUNT_SHIFT 32
+#define EV5_PCTR_2_COUNT_SHIFT 16
+
+#define EV5_PCTR_0_COUNT_MASK 0xffffUL
+#define EV5_PCTR_1_COUNT_MASK 0xffffUL
+#define EV5_PCTR_2_COUNT_MASK 0x3fffUL
+
+/* EV6 Counters */
+#define EV6_PCTR_0 (1UL<<0)
+#define EV6_PCTR_1 (1UL<<1)
+
+#define EV6_PCTR_0_COUNT_SHIFT 28
+#define EV6_PCTR_1_COUNT_SHIFT 6
+
+#define EV6_PCTR_0_COUNT_MASK 0xfffffUL
+#define EV6_PCTR_1_COUNT_MASK 0xfffffUL
+
+/* EV67 (and subsequent) counters */
+#define EV67_PCTR_0 (1UL<<0)
+#define EV67_PCTR_1 (1UL<<1)
+
+#define EV67_PCTR_0_COUNT_SHIFT 28
+#define EV67_PCTR_1_COUNT_SHIFT 6
+
+#define EV67_PCTR_0_COUNT_MASK 0xfffffUL
+#define EV67_PCTR_1_COUNT_MASK 0xfffffUL
+
+
+/*
+ * The Alpha Architecure Handbook, vers. 4 (1998) appears to have a misprint
+ *  in Table E-23 regarding the bits that set the event PCTR 1 counts.
+ *  Hopefully what we have here is correct.
+ */
+#define EV6_PCTR_0_EVENT_MASK 0x10UL
+#define EV6_PCTR_1_EVENT_MASK 0x0fUL
+
+/* EV6 Events */
+#define EV6_PCTR_0_CYCLES (0UL << 4)
+#define EV6_PCTR_0_INSTRUCTIONS (1UL << 4)
+
+#define EV6_PCTR_1_CYCLES 0
+#define EV6_PCTR_1_BRANCHES 1
+#define EV6_PCTR_1_BRANCH_MISPREDICTS 2
+#define EV6_PCTR_1_DTB_SINGLE_MISSES 3
+#define EV6_PCTR_1_DTB_DOUBLE_MISSES 4
+#define EV6_PCTR_1_ITB_MISSES 5
+#define EV6_PCTR_1_UNALIGNED_TRAPS 6
+#define EV6_PCTR_1_REPLY_TRAPS 7
+
+/* From the Alpha Architecture Reference Manual, 4th edn., 2002 */
+#define EV67_PCTR_MODE_MASK 0x10UL
+#define EV67_PCTR_EVENT_MASK 0x0CUL
+
+#define EV67_PCTR_MODE_PROFILEME (1UL<<4)
+#define EV67_PCTR_MODE_AGGREGATE (0UL<<4)
+
+#define EV67_PCTR_INSTR_CYCLES (0UL<<2)
+#define EV67_PCTR_CYCLES_UNDEF (1UL<<2)
+#define EV67_PCTR_INSTR_BCACHEMISS (2UL<<2)
+#define EV67_PCTR_CYCLES_MBOX (3UL<<2)
+
+#endif
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 5a62fb46ef20..1ee9b5b629b8 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_PCI)	+= pci.o pci_iommu.o pci-sysfs.o
 obj-$(CONFIG_SRM_ENV)	+= srm_env.o
 obj-$(CONFIG_MODULES)	+= module.o
+obj-$(CONFIG_PERF_EVENTS) += perf_event.o
 
 ifdef CONFIG_ALPHA_GENERIC
 
diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c
index e6d90568b65d..2f770e994289 100644
--- a/arch/alpha/kernel/core_t2.c
+++ b/arch/alpha/kernel/core_t2.c
@@ -74,8 +74,6 @@
 # define DBG(args)
 #endif
 
-DEFINE_RAW_SPINLOCK(t2_hae_lock);
-
 static volatile unsigned int t2_mcheck_any_expected;
 static volatile unsigned int t2_mcheck_last_taken;
 
@@ -406,6 +404,7 @@ void __init
 t2_init_arch(void)
 {
 	struct pci_controller *hose;
+	struct resource *hae_mem;
 	unsigned long temp;
 	unsigned int i;
 
@@ -433,7 +432,13 @@ t2_init_arch(void)
 	 */
 	pci_isa_hose = hose = alloc_pci_controller();
 	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
+	hae_mem = alloc_resource();
+	hae_mem->start = 0;
+	hae_mem->end = T2_MEM_R1_MASK;
+	hae_mem->name = pci_hae0_name;
+	if (request_resource(&iomem_resource, hae_mem) < 0)
+		printk(KERN_ERR "Failed to request HAE_MEM\n");
+	hose->mem_space = hae_mem;
 	hose->index = 0;
 
 	hose->sparse_mem_base = T2_SPARSE_MEM - IDENT_ADDR;
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index b45d913a51c3..6d159cee5f2f 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -73,8 +73,6 @@
 	ldq	$20, HAE_REG($19);	\
 	stq	$21, HAE_CACHE($19);	\
 	stq	$21, 0($20);		\
-	ldq	$0, 0($sp);		\
-	ldq	$1, 8($sp);		\
 99:;					\
 	ldq	$19, 72($sp);		\
 	ldq	$20, 80($sp);		\
@@ -316,19 +314,24 @@ ret_from_sys_call:
 	cmovne	$26, 0, $19		/* $19 = 0 => non-restartable */
 	ldq	$0, SP_OFF($sp)
 	and	$0, 8, $0
-	beq	$0, restore_all
-ret_from_reschedule:
+	beq	$0, ret_to_kernel
+ret_to_user:
 	/* Make sure need_resched and sigpending don't change between
 		sampling and the rti.  */
 	lda	$16, 7
 	call_pal PAL_swpipl
 	ldl	$5, TI_FLAGS($8)
 	and	$5, _TIF_WORK_MASK, $2
-	bne	$5, work_pending
+	bne	$2, work_pending
 restore_all:
 	RESTORE_ALL
 	call_pal PAL_rti
 
+ret_to_kernel:
+	lda	$16, 7
+	call_pal PAL_swpipl
+	br restore_all
+
 	.align 3
 $syscall_error:
 	/*
@@ -363,7 +366,7 @@ $ret_success:
  *       $8: current.
  *      $19: The old syscall number, or zero if this is not a return
  *           from a syscall that errored and is possibly restartable.
- *      $20: Error indication.
+ *      $20: The old a3 value
  */
 
 	.align	4
@@ -392,12 +395,18 @@ $work_resched:
 
 $work_notifysig:
 	mov	$sp, $16
-	br	$1, do_switch_stack
+	bsr	$1, do_switch_stack
 	mov	$sp, $17
 	mov	$5, $18
+	mov	$19, $9		/* save old syscall number */
+	mov	$20, $10	/* save old a3 */
+	and	$5, _TIF_SIGPENDING, $2
+	cmovne	$2, 0, $9	/* we don't want double syscall restarts */
 	jsr	$26, do_notify_resume
+	mov	$9, $19
+	mov	$10, $20
 	bsr	$1, undo_switch_stack
-	br	restore_all
+	br	ret_to_user
 .end work_pending
 
 /*
@@ -430,6 +439,7 @@ strace:
 	beq	$1, 1f
 	ldq	$27, 0($2)
 1:	jsr	$26, ($27), sys_gettimeofday
+ret_from_straced:
 	ldgp	$gp, 0($26)
 
 	/* check return.. */
@@ -650,7 +660,7 @@ kernel_thread:
 	/* We don't actually care for a3 success widgetry in the kernel.
 	   Not for positive errno values.  */
 	stq	$0, 0($sp)		/* $0 */
-	br	restore_all
+	br	ret_to_kernel
 .end kernel_thread
 
 /*
@@ -757,11 +767,15 @@ sys_vfork:
 	.ent	sys_sigreturn
 sys_sigreturn:
 	.prologue 0
+	lda	$9, ret_from_straced
+	cmpult	$26, $9, $9
 	mov	$sp, $17
 	lda	$18, -SWITCH_STACK_SIZE($sp)
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
 	jsr	$26, do_sigreturn
-	br	$1, undo_switch_stack
+	bne	$9, 1f
+	jsr	$26, syscall_trace
+1:	br	$1, undo_switch_stack
 	br	ret_from_sys_call
 .end sys_sigreturn
 
@@ -770,47 +784,19 @@ sys_sigreturn:
 	.ent	sys_rt_sigreturn
 sys_rt_sigreturn:
 	.prologue 0
+	lda	$9, ret_from_straced
+	cmpult	$26, $9, $9
 	mov	$sp, $17
 	lda	$18, -SWITCH_STACK_SIZE($sp)
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
 	jsr	$26, do_rt_sigreturn
-	br	$1, undo_switch_stack
+	bne	$9, 1f
+	jsr	$26, syscall_trace
+1:	br	$1, undo_switch_stack
 	br	ret_from_sys_call
 .end sys_rt_sigreturn
 
 	.align	4
-	.globl	sys_sigsuspend
-	.ent	sys_sigsuspend
-sys_sigsuspend:
-	.prologue 0
-	mov	$sp, $17
-	br	$1, do_switch_stack
-	mov	$sp, $18
-	subq	$sp, 16, $sp
-	stq	$26, 0($sp)
-	jsr	$26, do_sigsuspend
-	ldq	$26, 0($sp)
-	lda	$sp, SWITCH_STACK_SIZE+16($sp)
-	ret
-.end sys_sigsuspend
-
-	.align	4
-	.globl	sys_rt_sigsuspend
-	.ent	sys_rt_sigsuspend
-sys_rt_sigsuspend:
-	.prologue 0
-	mov	$sp, $18
-	br	$1, do_switch_stack
-	mov	$sp, $19
-	subq	$sp, 16, $sp
-	stq	$26, 0($sp)
-	jsr	$26, do_rt_sigsuspend
-	ldq	$26, 0($sp)
-	lda	$sp, SWITCH_STACK_SIZE+16($sp)
-	ret
-.end sys_rt_sigsuspend
-
-	.align	4
 	.globl	sys_sethae
 	.ent	sys_sethae
 sys_sethae:
@@ -929,15 +915,6 @@ sys_execve:
 .end sys_execve
 
 	.align	4
-	.globl	osf_sigprocmask
-	.ent	osf_sigprocmask
-osf_sigprocmask:
-	.prologue 0
-	mov	$sp, $18
-	jmp	$31, sys_osf_sigprocmask
-.end osf_sigprocmask
-
-	.align	4
 	.globl	alpha_ni_syscall
 	.ent	alpha_ni_syscall
 alpha_ni_syscall:
diff --git a/arch/alpha/kernel/err_ev6.c b/arch/alpha/kernel/err_ev6.c
index 8ca6345bf131..253cf1a87481 100644
--- a/arch/alpha/kernel/err_ev6.c
+++ b/arch/alpha/kernel/err_ev6.c
@@ -90,11 +90,13 @@ static int
 ev6_parse_cbox(u64 c_addr, u64 c1_syn, u64 c2_syn, 
 	       u64 c_stat, u64 c_sts, int print)
 {
-	char *sourcename[] = { "UNKNOWN", "UNKNOWN", "UNKNOWN",
-			       "MEMORY", "BCACHE", "DCACHE", 
-			       "BCACHE PROBE", "BCACHE PROBE" };
-	char *streamname[] = { "D", "I" };
-	char *bitsname[] = { "SINGLE", "DOUBLE" };
+	static const char * const sourcename[] = {
+		"UNKNOWN", "UNKNOWN", "UNKNOWN",
+		"MEMORY", "BCACHE", "DCACHE",
+		"BCACHE PROBE", "BCACHE PROBE"
+	};
+	static const char * const streamname[] = { "D", "I" };
+	static const char * const bitsname[] = { "SINGLE", "DOUBLE" };
 	int status = MCHK_DISPOSITION_REPORT;
 	int source = -1, stream = -1, bits = -1;
 
diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c
index 52a79dfc13c6..648ae88aeb8a 100644
--- a/arch/alpha/kernel/err_marvel.c
+++ b/arch/alpha/kernel/err_marvel.c
@@ -109,7 +109,7 @@ marvel_print_err_cyc(u64 err_cyc)
 #define IO7__ERR_CYC__CYCLE__M	(0x7)
 
 	printk("%s        Packet In Error: %s\n"
-	       "%s        Error in %s, cycle %ld%s%s\n",
+	       "%s        Error in %s, cycle %lld%s%s\n",
 	       err_print_prefix, 
 	       packet_desc[EXTRACT(err_cyc, IO7__ERR_CYC__PACKET)],
 	       err_print_prefix,
@@ -313,7 +313,7 @@ marvel_print_po7_ugbge_sym(u64 ugbge_sym)
 	}
 
 	printk("%s      Up Hose Garbage Symptom:\n"
-	       "%s        Source Port: %ld - Dest PID: %ld - OpCode: %s\n", 
+	       "%s        Source Port: %lld - Dest PID: %lld - OpCode: %s\n",
 	       err_print_prefix,
 	       err_print_prefix, 
 	       EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_SRC_PORT),
@@ -552,7 +552,7 @@ marvel_print_pox_spl_cmplt(u64 spl_cmplt)
 #define IO7__POX_SPLCMPLT__REM_BYTE_COUNT__M	(0xfff)
 
 	printk("%s      Split Completion Error:\n"	
-	       "%s         Source (Bus:Dev:Func): %ld:%ld:%ld\n",
+	       "%s         Source (Bus:Dev:Func): %lld:%lld:%lld\n",
 	       err_print_prefix,
 	       err_print_prefix,
 	       EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_BUS),
@@ -589,22 +589,23 @@ marvel_print_pox_spl_cmplt(u64 spl_cmplt)
 static void
 marvel_print_pox_trans_sum(u64 trans_sum)
 {
-	char *pcix_cmd[] = { "Interrupt Acknowledge",
-			     "Special Cycle",
-			     "I/O Read",
-			     "I/O Write",
-			     "Reserved",
-			     "Reserved / Device ID Message",
-			     "Memory Read",
-			     "Memory Write",
-			     "Reserved / Alias to Memory Read Block",
-			     "Reserved / Alias to Memory Write Block",
-			     "Configuration Read",
-			     "Configuration Write",
-			     "Memory Read Multiple / Split Completion",
-			     "Dual Address Cycle",
-			     "Memory Read Line / Memory Read Block",
-			     "Memory Write and Invalidate / Memory Write Block"
+	static const char * const pcix_cmd[] = {
+		"Interrupt Acknowledge",
+		"Special Cycle",
+		"I/O Read",
+		"I/O Write",
+		"Reserved",
+		"Reserved / Device ID Message",
+		"Memory Read",
+		"Memory Write",
+		"Reserved / Alias to Memory Read Block",
+		"Reserved / Alias to Memory Write Block",
+		"Configuration Read",
+		"Configuration Write",
+		"Memory Read Multiple / Split Completion",
+		"Dual Address Cycle",
+		"Memory Read Line / Memory Read Block",
+		"Memory Write and Invalidate / Memory Write Block"
 	};
 
 #define IO7__POX_TRANSUM__PCI_ADDR__S		(0)
diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c
index f7ed97ce0dfd..c3b3781a03de 100644
--- a/arch/alpha/kernel/err_titan.c
+++ b/arch/alpha/kernel/err_titan.c
@@ -75,8 +75,12 @@ titan_parse_p_serror(int which, u64 serror, int print)
 	int status = MCHK_DISPOSITION_REPORT;
 
 #ifdef CONFIG_VERBOSE_MCHECK
-	char *serror_src[] = {"GPCI", "APCI", "AGP HP", "AGP LP"};
-	char *serror_cmd[] = {"DMA Read", "DMA RMW", "SGTE Read", "Reserved"};
+	static const char * const serror_src[] = {
+		"GPCI", "APCI", "AGP HP", "AGP LP"
+	};
+	static const char * const serror_cmd[] = {
+		"DMA Read", "DMA RMW", "SGTE Read", "Reserved"
+	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 
 #define TITAN__PCHIP_SERROR__LOST_UECC	(1UL << 0)
@@ -140,14 +144,15 @@ titan_parse_p_perror(int which, int port, u64 perror, int print)
 	int status = MCHK_DISPOSITION_REPORT;
 
 #ifdef CONFIG_VERBOSE_MCHECK
-	char *perror_cmd[] = { "Interrupt Acknowledge", "Special Cycle",
-			       "I/O Read",	       	"I/O Write",
-			       "Reserved",	       	"Reserved",
-			       "Memory Read",		"Memory Write",
-			       "Reserved",		"Reserved",
-			       "Configuration Read",	"Configuration Write",
-			       "Memory Read Multiple",	"Dual Address Cycle",
-			       "Memory Read Line","Memory Write and Invalidate"
+	static const char * const perror_cmd[] = {
+		"Interrupt Acknowledge", "Special Cycle",
+		"I/O Read",		"I/O Write",
+		"Reserved",		"Reserved",
+		"Memory Read",		"Memory Write",
+		"Reserved",		"Reserved",
+		"Configuration Read",	"Configuration Write",
+		"Memory Read Multiple",	"Dual Address Cycle",
+		"Memory Read Line",	"Memory Write and Invalidate"
 	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 
@@ -273,11 +278,11 @@ titan_parse_p_agperror(int which, u64 agperror, int print)
 	int cmd, len;
 	unsigned long addr;
 
-	char *agperror_cmd[] = { "Read (low-priority)",	"Read (high-priority)",
-				 "Write (low-priority)",
-				 "Write (high-priority)",
-				 "Reserved",		"Reserved",
-				 "Flush",		"Fence"
+	static const char * const agperror_cmd[] = {
+		"Read (low-priority)",	"Read (high-priority)",
+		"Write (low-priority)",	"Write (high-priority)",
+		"Reserved",		"Reserved",
+		"Flush",		"Fence"
 	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 7f912ba3d9ad..fe912984d9b1 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -31,6 +31,7 @@
 #include <asm/uaccess.h>
 
 volatile unsigned long irq_err_count;
+DEFINE_PER_CPU(unsigned long, irq_pmi_count);
 
 void ack_bad_irq(unsigned int irq)
 {
@@ -63,9 +64,7 @@ int irq_select_affinity(unsigned int irq)
 int
 show_interrupts(struct seq_file *p, void *v)
 {
-#ifdef CONFIG_SMP
 	int j;
-#endif
 	int irq = *(loff_t *) v;
 	struct irqaction * action;
 	unsigned long flags;
@@ -112,6 +111,10 @@ unlock:
 			seq_printf(p, "%10lu ", cpu_data[j].ipi_count);
 		seq_putc(p, '\n');
 #endif
+		seq_puts(p, "PMI: ");
+		for_each_online_cpu(j)
+			seq_printf(p, "%10lu ", per_cpu(irq_pmi_count, j));
+		seq_puts(p, "          Performance Monitoring\n");
 		seq_printf(p, "ERR: %10lu\n", irq_err_count);
 	}
 	return 0;
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index cfde865b78e0..5f77afb88e89 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -10,6 +10,7 @@
 
 #include <asm/machvec.h>
 #include <asm/dma.h>
+#include <asm/perf_event.h>
 
 #include "proto.h"
 #include "irq_impl.h"
@@ -111,6 +112,8 @@ init_IRQ(void)
 	wrent(entInt, 0);
 
 	alpha_mv.init_irq();
+
+	init_hw_perf_events();
 }
 
 /*
diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h
index 512685f78097..7fa62488bd16 100644
--- a/arch/alpha/kernel/machvec_impl.h
+++ b/arch/alpha/kernel/machvec_impl.h
@@ -25,6 +25,9 @@
 #ifdef MCPCIA_ONE_HAE_WINDOW
 #define MCPCIA_HAE_ADDRESS	(&alpha_mv.hae_cache)
 #endif
+#ifdef T2_ONE_HAE_WINDOW
+#define T2_HAE_ADDRESS		(&alpha_mv.hae_cache)
+#endif
 
 /* Only a few systems don't define IACK_SC, handling all interrupts through
    the SRM console.  But splitting out that one case from IO() below
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index de9d39717808..547e8b84b2f7 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/syscalls.h>
 #include <linux/unistd.h>
@@ -69,7 +68,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
 {
 	struct mm_struct *mm;
 
-	lock_kernel();
 	mm = current->mm;
 	mm->end_code = bss_start + bss_len;
 	mm->start_brk = bss_start + bss_len;
@@ -78,7 +76,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
 	printk("set_program_attributes(%lx %lx %lx %lx)\n",
 		text_start, text_len, bss_start, bss_len);
 #endif
-	unlock_kernel();
 	return 0;
 }
 
@@ -234,17 +231,17 @@ linux_to_osf_statfs(struct kstatfs *linux_stat, struct osf_statfs __user *osf_st
 }
 
 static int
-do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer,
+do_osf_statfs(struct path *path, struct osf_statfs __user *buffer,
 	      unsigned long bufsiz)
 {
 	struct kstatfs linux_stat;
-	int error = vfs_statfs(dentry, &linux_stat);
+	int error = vfs_statfs(path, &linux_stat);
 	if (!error)
 		error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz);
 	return error;	
 }
 
-SYSCALL_DEFINE3(osf_statfs, char __user *, pathname,
+SYSCALL_DEFINE3(osf_statfs, const char __user *, pathname,
 		struct osf_statfs __user *, buffer, unsigned long, bufsiz)
 {
 	struct path path;
@@ -252,7 +249,7 @@ SYSCALL_DEFINE3(osf_statfs, char __user *, pathname,
 
 	retval = user_path(pathname, &path);
 	if (!retval) {
-		retval = do_osf_statfs(path.dentry, buffer, bufsiz);
+		retval = do_osf_statfs(&path, buffer, bufsiz);
 		path_put(&path);
 	}
 	return retval;
@@ -267,7 +264,7 @@ SYSCALL_DEFINE3(osf_fstatfs, unsigned long, fd,
 	retval = -EBADF;
 	file = fget(fd);
 	if (file) {
-		retval = do_osf_statfs(file->f_path.dentry, buffer, bufsiz);
+		retval = do_osf_statfs(&file->f_path, buffer, bufsiz);
 		fput(file);
 	}
 	return retval;
@@ -358,7 +355,7 @@ osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
 	return do_mount("", dirname, "proc", flags, NULL);
 }
 
-SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
+SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, const char __user *, path,
 		int, flag, void __user *, data)
 {
 	int retval;
@@ -517,7 +514,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
 	long error;
 	int __user *min_buf_size_ptr;
 
-	lock_kernel();
 	switch (code) {
 	case PL_SET:
 		if (get_user(error, &args->set.nbytes))
@@ -547,7 +543,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
 		error = -EOPNOTSUPP;
 		break;
 	};
-	unlock_kernel();
 	return error;
 }
 
@@ -594,7 +589,7 @@ SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss,
 
 SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
 {
-	char *sysinfo_table[] = {
+	const char *sysinfo_table[] = {
 		utsname()->sysname,
 		utsname()->nodename,
 		utsname()->release,
@@ -606,7 +601,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
 		"dummy",	/* secure RPC domain */
 	};
 	unsigned long offset;
-	char *res;
+	const char *res;
 	long len, err = -EINVAL;
 
 	offset = command-1;
@@ -932,7 +927,7 @@ SYSCALL_DEFINE3(osf_setitimer, int, which, struct itimerval32 __user *, in,
 
 }
 
-SYSCALL_DEFINE2(osf_utimes, char __user *, filename,
+SYSCALL_DEFINE2(osf_utimes, const char __user *, filename,
 		struct timeval32 __user *, tvs)
 {
 	struct timespec tv[2];
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index 738fc824e2ea..b899e95f79fd 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -66,7 +66,7 @@ static int pci_mmap_resource(struct kobject *kobj,
 {
 	struct pci_dev *pdev = to_pci_dev(container_of(kobj,
 						       struct device, kobj));
-	struct resource *res = (struct resource *)attr->private;
+	struct resource *res = attr->private;
 	enum pci_mmap_state mmap_type;
 	struct pci_bus_region bar;
 	int i;
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index d1dbd9acd1df..022c2748fa41 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -223,7 +223,7 @@ iommu_arena_free(struct pci_iommu_arena *arena, long ofs, long n)
  */
 static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
 {
-	dma64_addr_t dac_offset = alpha_mv.pci_dac_offset;
+	dma_addr_t dac_offset = alpha_mv.pci_dac_offset;
 	int ok = 1;
 
 	/* If this is not set, the machine doesn't support DAC at all.  */
@@ -756,7 +756,7 @@ static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
 	spin_lock_irqsave(&arena->lock, flags);
 
 	for (end = sg + nents; sg < end; ++sg) {
-		dma64_addr_t addr;
+		dma_addr_t addr;
 		size_t size;
 		long npages, ofs;
 		dma_addr_t tend;
diff --git a/arch/alpha/kernel/perf_event.c b/arch/alpha/kernel/perf_event.c
new file mode 100644
index 000000000000..1cc49683fb69
--- /dev/null
+++ b/arch/alpha/kernel/perf_event.c
@@ -0,0 +1,886 @@
+/*
+ * Hardware performance events for the Alpha.
+ *
+ * We implement HW counts on the EV67 and subsequent CPUs only.
+ *
+ * (C) 2010 Michael J. Cree
+ *
+ * Somewhat based on the Sparc code, and to a lesser extent the PowerPC and
+ * ARM code, which are copyright by their respective authors.
+ */
+
+#include <linux/perf_event.h>
+#include <linux/kprobes.h>
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/mutex.h>
+
+#include <asm/hwrpb.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/pal.h>
+#include <asm/wrperfmon.h>
+#include <asm/hw_irq.h>
+
+
+/* The maximum number of PMCs on any Alpha CPU whatsoever. */
+#define MAX_HWEVENTS 3
+#define PMC_NO_INDEX -1
+
+/* For tracking PMCs and the hw events they monitor on each CPU. */
+struct cpu_hw_events {
+	int			enabled;
+	/* Number of events scheduled; also number entries valid in arrays below. */
+	int			n_events;
+	/* Number events added since last hw_perf_disable(). */
+	int			n_added;
+	/* Events currently scheduled. */
+	struct perf_event	*event[MAX_HWEVENTS];
+	/* Event type of each scheduled event. */
+	unsigned long		evtype[MAX_HWEVENTS];
+	/* Current index of each scheduled event; if not yet determined
+	 * contains PMC_NO_INDEX.
+	 */
+	int			current_idx[MAX_HWEVENTS];
+	/* The active PMCs' config for easy use with wrperfmon(). */
+	unsigned long		config;
+	/* The active counters' indices for easy use with wrperfmon(). */
+	unsigned long		idx_mask;
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+
+
+/*
+ * A structure to hold the description of the PMCs available on a particular
+ * type of Alpha CPU.
+ */
+struct alpha_pmu_t {
+	/* Mapping of the perf system hw event types to indigenous event types */
+	const int *event_map;
+	/* The number of entries in the event_map */
+	int  max_events;
+	/* The number of PMCs on this Alpha */
+	int  num_pmcs;
+	/*
+	 * All PMC counters reside in the IBOX register PCTR.  This is the
+	 * LSB of the counter.
+	 */
+	int  pmc_count_shift[MAX_HWEVENTS];
+	/*
+	 * The mask that isolates the PMC bits when the LSB of the counter
+	 * is shifted to bit 0.
+	 */
+	unsigned long pmc_count_mask[MAX_HWEVENTS];
+	/* The maximum period the PMC can count. */
+	unsigned long pmc_max_period[MAX_HWEVENTS];
+	/*
+	 * The maximum value that may be written to the counter due to
+	 * hardware restrictions is pmc_max_period - pmc_left.
+	 */
+	long pmc_left[3];
+	 /* Subroutine for allocation of PMCs.  Enforces constraints. */
+	int (*check_constraints)(struct perf_event **, unsigned long *, int);
+};
+
+/*
+ * The Alpha CPU PMU description currently in operation.  This is set during
+ * the boot process to the specific CPU of the machine.
+ */
+static const struct alpha_pmu_t *alpha_pmu;
+
+
+#define HW_OP_UNSUPPORTED -1
+
+/*
+ * The hardware description of the EV67, EV68, EV69, EV7 and EV79 PMUs
+ * follow. Since they are identical we refer to them collectively as the
+ * EV67 henceforth.
+ */
+
+/*
+ * EV67 PMC event types
+ *
+ * There is no one-to-one mapping of the possible hw event types to the
+ * actual codes that are used to program the PMCs hence we introduce our
+ * own hw event type identifiers.
+ */
+enum ev67_pmc_event_type {
+	EV67_CYCLES = 1,
+	EV67_INSTRUCTIONS,
+	EV67_BCACHEMISS,
+	EV67_MBOXREPLAY,
+	EV67_LAST_ET
+};
+#define EV67_NUM_EVENT_TYPES (EV67_LAST_ET-EV67_CYCLES)
+
+
+/* Mapping of the hw event types to the perf tool interface */
+static const int ev67_perfmon_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	 = EV67_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	 = EV67_INSTRUCTIONS,
+	[PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	 = EV67_BCACHEMISS,
+};
+
+struct ev67_mapping_t {
+	int config;
+	int idx;
+};
+
+/*
+ * The mapping used for one event only - these must be in same order as enum
+ * ev67_pmc_event_type definition.
+ */
+static const struct ev67_mapping_t ev67_mapping[] = {
+	{EV67_PCTR_INSTR_CYCLES, 1},	 /* EV67_CYCLES, */
+	{EV67_PCTR_INSTR_CYCLES, 0},	 /* EV67_INSTRUCTIONS */
+	{EV67_PCTR_INSTR_BCACHEMISS, 1}, /* EV67_BCACHEMISS */
+	{EV67_PCTR_CYCLES_MBOX, 1}	 /* EV67_MBOXREPLAY */
+};
+
+
+/*
+ * Check that a group of events can be simultaneously scheduled on to the
+ * EV67 PMU.  Also allocate counter indices and config.
+ */
+static int ev67_check_constraints(struct perf_event **event,
+				unsigned long *evtype, int n_ev)
+{
+	int idx0;
+	unsigned long config;
+
+	idx0 = ev67_mapping[evtype[0]-1].idx;
+	config = ev67_mapping[evtype[0]-1].config;
+	if (n_ev == 1)
+		goto success;
+
+	BUG_ON(n_ev != 2);
+
+	if (evtype[0] == EV67_MBOXREPLAY || evtype[1] == EV67_MBOXREPLAY) {
+		/* MBOX replay traps must be on PMC 1 */
+		idx0 = (evtype[0] == EV67_MBOXREPLAY) ? 1 : 0;
+		/* Only cycles can accompany MBOX replay traps */
+		if (evtype[idx0] == EV67_CYCLES) {
+			config = EV67_PCTR_CYCLES_MBOX;
+			goto success;
+		}
+	}
+
+	if (evtype[0] == EV67_BCACHEMISS || evtype[1] == EV67_BCACHEMISS) {
+		/* Bcache misses must be on PMC 1 */
+		idx0 = (evtype[0] == EV67_BCACHEMISS) ? 1 : 0;
+		/* Only instructions can accompany Bcache misses */
+		if (evtype[idx0] == EV67_INSTRUCTIONS) {
+			config = EV67_PCTR_INSTR_BCACHEMISS;
+			goto success;
+		}
+	}
+
+	if (evtype[0] == EV67_INSTRUCTIONS || evtype[1] == EV67_INSTRUCTIONS) {
+		/* Instructions must be on PMC 0 */
+		idx0 = (evtype[0] == EV67_INSTRUCTIONS) ? 0 : 1;
+		/* By this point only cycles can accompany instructions */
+		if (evtype[idx0^1] == EV67_CYCLES) {
+			config = EV67_PCTR_INSTR_CYCLES;
+			goto success;
+		}
+	}
+
+	/* Otherwise, darn it, there is a conflict.  */
+	return -1;
+
+success:
+	event[0]->hw.idx = idx0;
+	event[0]->hw.config_base = config;
+	if (n_ev == 2) {
+		event[1]->hw.idx = idx0 ^ 1;
+		event[1]->hw.config_base = config;
+	}
+	return 0;
+}
+
+
+static const struct alpha_pmu_t ev67_pmu = {
+	.event_map = ev67_perfmon_event_map,
+	.max_events = ARRAY_SIZE(ev67_perfmon_event_map),
+	.num_pmcs = 2,
+	.pmc_count_shift = {EV67_PCTR_0_COUNT_SHIFT, EV67_PCTR_1_COUNT_SHIFT, 0},
+	.pmc_count_mask = {EV67_PCTR_0_COUNT_MASK,  EV67_PCTR_1_COUNT_MASK,  0},
+	.pmc_max_period = {(1UL<<20) - 1, (1UL<<20) - 1, 0},
+	.pmc_left = {16, 4, 0},
+	.check_constraints = ev67_check_constraints
+};
+
+
+
+/*
+ * Helper routines to ensure that we read/write only the correct PMC bits
+ * when calling the wrperfmon PALcall.
+ */
+static inline void alpha_write_pmc(int idx, unsigned long val)
+{
+	val &= alpha_pmu->pmc_count_mask[idx];
+	val <<= alpha_pmu->pmc_count_shift[idx];
+	val |= (1<<idx);
+	wrperfmon(PERFMON_CMD_WRITE, val);
+}
+
+static inline unsigned long alpha_read_pmc(int idx)
+{
+	unsigned long val;
+
+	val = wrperfmon(PERFMON_CMD_READ, 0);
+	val >>= alpha_pmu->pmc_count_shift[idx];
+	val &= alpha_pmu->pmc_count_mask[idx];
+	return val;
+}
+
+/* Set a new period to sample over */
+static int alpha_perf_event_set_period(struct perf_event *event,
+				struct hw_perf_event *hwc, int idx)
+{
+	long left = local64_read(&hwc->period_left);
+	long period = hwc->sample_period;
+	int ret = 0;
+
+	if (unlikely(left <= -period)) {
+		left = period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	/*
+	 * Hardware restrictions require that the counters must not be
+	 * written with values that are too close to the maximum period.
+	 */
+	if (unlikely(left < alpha_pmu->pmc_left[idx]))
+		left = alpha_pmu->pmc_left[idx];
+
+	if (left > (long)alpha_pmu->pmc_max_period[idx])
+		left = alpha_pmu->pmc_max_period[idx];
+
+	local64_set(&hwc->prev_count, (unsigned long)(-left));
+
+	alpha_write_pmc(idx, (unsigned long)(-left));
+
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+
+/*
+ * Calculates the count (the 'delta') since the last time the PMC was read.
+ *
+ * As the PMCs' full period can easily be exceeded within the perf system
+ * sampling period we cannot use any high order bits as a guard bit in the
+ * PMCs to detect overflow as is done by other architectures.  The code here
+ * calculates the delta on the basis that there is no overflow when ovf is
+ * zero.  The value passed via ovf by the interrupt handler corrects for
+ * overflow.
+ *
+ * This can be racey on rare occasions -- a call to this routine can occur
+ * with an overflowed counter just before the PMI service routine is called.
+ * The check for delta negative hopefully always rectifies this situation.
+ */
+static unsigned long alpha_perf_event_update(struct perf_event *event,
+					struct hw_perf_event *hwc, int idx, long ovf)
+{
+	long prev_raw_count, new_raw_count;
+	long delta;
+
+again:
+	prev_raw_count = local64_read(&hwc->prev_count);
+	new_raw_count = alpha_read_pmc(idx);
+
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = (new_raw_count - (prev_raw_count & alpha_pmu->pmc_count_mask[idx])) + ovf;
+
+	/* It is possible on very rare occasions that the PMC has overflowed
+	 * but the interrupt is yet to come.  Detect and fix this situation.
+	 */
+	if (unlikely(delta < 0)) {
+		delta += alpha_pmu->pmc_max_period[idx] + 1;
+	}
+
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
+
+/*
+ * Collect all HW events into the array event[].
+ */
+static int collect_events(struct perf_event *group, int max_count,
+			  struct perf_event *event[], unsigned long *evtype,
+			  int *current_idx)
+{
+	struct perf_event *pe;
+	int n = 0;
+
+	if (!is_software_event(group)) {
+		if (n >= max_count)
+			return -1;
+		event[n] = group;
+		evtype[n] = group->hw.event_base;
+		current_idx[n++] = PMC_NO_INDEX;
+	}
+	list_for_each_entry(pe, &group->sibling_list, group_entry) {
+		if (!is_software_event(pe) && pe->state != PERF_EVENT_STATE_OFF) {
+			if (n >= max_count)
+				return -1;
+			event[n] = pe;
+			evtype[n] = pe->hw.event_base;
+			current_idx[n++] = PMC_NO_INDEX;
+		}
+	}
+	return n;
+}
+
+
+
+/*
+ * Check that a group of events can be simultaneously scheduled on to the PMU.
+ */
+static int alpha_check_constraints(struct perf_event **events,
+				   unsigned long *evtypes, int n_ev)
+{
+
+	/* No HW events is possible from hw_perf_group_sched_in(). */
+	if (n_ev == 0)
+		return 0;
+
+	if (n_ev > alpha_pmu->num_pmcs)
+		return -1;
+
+	return alpha_pmu->check_constraints(events, evtypes, n_ev);
+}
+
+
+/*
+ * If new events have been scheduled then update cpuc with the new
+ * configuration.  This may involve shifting cycle counts from one PMC to
+ * another.
+ */
+static void maybe_change_configuration(struct cpu_hw_events *cpuc)
+{
+	int j;
+
+	if (cpuc->n_added == 0)
+		return;
+
+	/* Find counters that are moving to another PMC and update */
+	for (j = 0; j < cpuc->n_events; j++) {
+		struct perf_event *pe = cpuc->event[j];
+
+		if (cpuc->current_idx[j] != PMC_NO_INDEX &&
+			cpuc->current_idx[j] != pe->hw.idx) {
+			alpha_perf_event_update(pe, &pe->hw, cpuc->current_idx[j], 0);
+			cpuc->current_idx[j] = PMC_NO_INDEX;
+		}
+	}
+
+	/* Assign to counters all unassigned events. */
+	cpuc->idx_mask = 0;
+	for (j = 0; j < cpuc->n_events; j++) {
+		struct perf_event *pe = cpuc->event[j];
+		struct hw_perf_event *hwc = &pe->hw;
+		int idx = hwc->idx;
+
+		if (cpuc->current_idx[j] == PMC_NO_INDEX) {
+			alpha_perf_event_set_period(pe, hwc, idx);
+			cpuc->current_idx[j] = idx;
+		}
+
+		if (!(hwc->state & PERF_HES_STOPPED))
+			cpuc->idx_mask |= (1<<cpuc->current_idx[j]);
+	}
+	cpuc->config = cpuc->event[0]->hw.config_base;
+}
+
+
+
+/* Schedule perf HW event on to PMU.
+ *  - this function is called from outside this module via the pmu struct
+ *    returned from perf event initialisation.
+ */
+static int alpha_pmu_add(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int n0;
+	int ret;
+	unsigned long irq_flags;
+
+	/*
+	 * The Sparc code has the IRQ disable first followed by the perf
+	 * disable, however this can lead to an overflowed counter with the
+	 * PMI disabled on rare occasions.  The alpha_perf_event_update()
+	 * routine should detect this situation by noting a negative delta,
+	 * nevertheless we disable the PMCs first to enable a potential
+	 * final PMI to occur before we disable interrupts.
+	 */
+	perf_pmu_disable(event->pmu);
+	local_irq_save(irq_flags);
+
+	/* Default to error to be returned */
+	ret = -EAGAIN;
+
+	/* Insert event on to PMU and if successful modify ret to valid return */
+	n0 = cpuc->n_events;
+	if (n0 < alpha_pmu->num_pmcs) {
+		cpuc->event[n0] = event;
+		cpuc->evtype[n0] = event->hw.event_base;
+		cpuc->current_idx[n0] = PMC_NO_INDEX;
+
+		if (!alpha_check_constraints(cpuc->event, cpuc->evtype, n0+1)) {
+			cpuc->n_events++;
+			cpuc->n_added++;
+			ret = 0;
+		}
+	}
+
+	hwc->state = PERF_HES_UPTODATE;
+	if (!(flags & PERF_EF_START))
+		hwc->state |= PERF_HES_STOPPED;
+
+	local_irq_restore(irq_flags);
+	perf_pmu_enable(event->pmu);
+
+	return ret;
+}
+
+
+
+/* Disable performance monitoring unit
+ *  - this function is called from outside this module via the pmu struct
+ *    returned from perf event initialisation.
+ */
+static void alpha_pmu_del(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	unsigned long irq_flags;
+	int j;
+
+	perf_pmu_disable(event->pmu);
+	local_irq_save(irq_flags);
+
+	for (j = 0; j < cpuc->n_events; j++) {
+		if (event == cpuc->event[j]) {
+			int idx = cpuc->current_idx[j];
+
+			/* Shift remaining entries down into the existing
+			 * slot.
+			 */
+			while (++j < cpuc->n_events) {
+				cpuc->event[j - 1] = cpuc->event[j];
+				cpuc->evtype[j - 1] = cpuc->evtype[j];
+				cpuc->current_idx[j - 1] =
+					cpuc->current_idx[j];
+			}
+
+			/* Absorb the final count and turn off the event. */
+			alpha_perf_event_update(event, hwc, idx, 0);
+			perf_event_update_userpage(event);
+
+			cpuc->idx_mask &= ~(1UL<<idx);
+			cpuc->n_events--;
+			break;
+		}
+	}
+
+	local_irq_restore(irq_flags);
+	perf_pmu_enable(event->pmu);
+}
+
+
+static void alpha_pmu_read(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	alpha_perf_event_update(event, hwc, hwc->idx, 0);
+}
+
+
+static void alpha_pmu_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (!(hwc->state & PERF_HES_STOPPED)) {
+		cpuc->idx_mask &= ~(1UL<<hwc->idx);
+		hwc->state |= PERF_HES_STOPPED;
+	}
+
+	if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
+		alpha_perf_event_update(event, hwc, hwc->idx, 0);
+		hwc->state |= PERF_HES_UPTODATE;
+	}
+
+	if (cpuc->enabled)
+		wrperfmon(PERFMON_CMD_DISABLE, (1UL<<hwc->idx));
+}
+
+
+static void alpha_pmu_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED)))
+		return;
+
+	if (flags & PERF_EF_RELOAD) {
+		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+		alpha_perf_event_set_period(event, hwc, hwc->idx);
+	}
+
+	hwc->state = 0;
+
+	cpuc->idx_mask |= 1UL<<hwc->idx;
+	if (cpuc->enabled)
+		wrperfmon(PERFMON_CMD_ENABLE, (1UL<<hwc->idx));
+}
+
+
+/*
+ * Check that CPU performance counters are supported.
+ * - currently support EV67 and later CPUs.
+ * - actually some later revisions of the EV6 have the same PMC model as the
+ *     EV67 but we don't do suffiently deep CPU detection to detect them.
+ *     Bad luck to the very few people who might have one, I guess.
+ */
+static int supported_cpu(void)
+{
+	struct percpu_struct *cpu;
+	unsigned long cputype;
+
+	/* Get cpu type from HW */
+	cpu = (struct percpu_struct *)((char *)hwrpb + hwrpb->processor_offset);
+	cputype = cpu->type & 0xffffffff;
+	/* Include all of EV67, EV68, EV7, EV79 and EV69 as supported. */
+	return (cputype >= EV67_CPU) && (cputype <= EV69_CPU);
+}
+
+
+
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	/* Nothing to be done! */
+	return;
+}
+
+
+
+static int __hw_perf_event_init(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	struct hw_perf_event *hwc = &event->hw;
+	struct perf_event *evts[MAX_HWEVENTS];
+	unsigned long evtypes[MAX_HWEVENTS];
+	int idx_rubbish_bin[MAX_HWEVENTS];
+	int ev;
+	int n;
+
+	/* We only support a limited range of HARDWARE event types with one
+	 * only programmable via a RAW event type.
+	 */
+	if (attr->type == PERF_TYPE_HARDWARE) {
+		if (attr->config >= alpha_pmu->max_events)
+			return -EINVAL;
+		ev = alpha_pmu->event_map[attr->config];
+	} else if (attr->type == PERF_TYPE_HW_CACHE) {
+		return -EOPNOTSUPP;
+	} else if (attr->type == PERF_TYPE_RAW) {
+		ev = attr->config & 0xff;
+	} else {
+		return -EOPNOTSUPP;
+	}
+
+	if (ev < 0) {
+		return ev;
+	}
+
+	/* The EV67 does not support mode exclusion */
+	if (attr->exclude_kernel || attr->exclude_user
+			|| attr->exclude_hv || attr->exclude_idle) {
+		return -EPERM;
+	}
+
+	/*
+	 * We place the event type in event_base here and leave calculation
+	 * of the codes to programme the PMU for alpha_pmu_enable() because
+	 * it is only then we will know what HW events are actually
+	 * scheduled on to the PMU.  At that point the code to programme the
+	 * PMU is put into config_base and the PMC to use is placed into
+	 * idx.  We initialise idx (below) to PMC_NO_INDEX to indicate that
+	 * it is yet to be determined.
+	 */
+	hwc->event_base = ev;
+
+	/* Collect events in a group together suitable for calling
+	 * alpha_check_constraints() to verify that the group as a whole can
+	 * be scheduled on to the PMU.
+	 */
+	n = 0;
+	if (event->group_leader != event) {
+		n = collect_events(event->group_leader,
+				alpha_pmu->num_pmcs - 1,
+				evts, evtypes, idx_rubbish_bin);
+		if (n < 0)
+			return -EINVAL;
+	}
+	evtypes[n] = hwc->event_base;
+	evts[n] = event;
+
+	if (alpha_check_constraints(evts, evtypes, n + 1))
+		return -EINVAL;
+
+	/* Indicate that PMU config and idx are yet to be determined. */
+	hwc->config_base = 0;
+	hwc->idx = PMC_NO_INDEX;
+
+	event->destroy = hw_perf_event_destroy;
+
+	/*
+	 * Most architectures reserve the PMU for their use at this point.
+	 * As there is no existing mechanism to arbitrate usage and there
+	 * appears to be no other user of the Alpha PMU we just assume
+	 * that we can just use it, hence a NO-OP here.
+	 *
+	 * Maybe an alpha_reserve_pmu() routine should be implemented but is
+	 * anything else ever going to use it?
+	 */
+
+	if (!hwc->sample_period) {
+		hwc->sample_period = alpha_pmu->pmc_max_period[0];
+		hwc->last_period = hwc->sample_period;
+		local64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	return 0;
+}
+
+/*
+ * Main entry point to initialise a HW performance event.
+ */
+static int alpha_pmu_event_init(struct perf_event *event)
+{
+	int err;
+
+	switch (event->attr.type) {
+	case PERF_TYPE_RAW:
+	case PERF_TYPE_HARDWARE:
+	case PERF_TYPE_HW_CACHE:
+		break;
+
+	default:
+		return -ENOENT;
+	}
+
+	if (!alpha_pmu)
+		return -ENODEV;
+
+	/* Do the real initialisation work. */
+	err = __hw_perf_event_init(event);
+
+	return err;
+}
+
+/*
+ * Main entry point - enable HW performance counters.
+ */
+static void alpha_pmu_enable(struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	if (cpuc->n_events > 0) {
+		/* Update cpuc with information from any new scheduled events. */
+		maybe_change_configuration(cpuc);
+
+		/* Start counting the desired events. */
+		wrperfmon(PERFMON_CMD_LOGGING_OPTIONS, EV67_PCTR_MODE_AGGREGATE);
+		wrperfmon(PERFMON_CMD_DESIRED_EVENTS, cpuc->config);
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+	}
+}
+
+
+/*
+ * Main entry point - disable HW performance counters.
+ */
+
+static void alpha_pmu_disable(struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	cpuc->n_added = 0;
+
+	wrperfmon(PERFMON_CMD_DISABLE, cpuc->idx_mask);
+}
+
+static struct pmu pmu = {
+	.pmu_enable	= alpha_pmu_enable,
+	.pmu_disable	= alpha_pmu_disable,
+	.event_init	= alpha_pmu_event_init,
+	.add		= alpha_pmu_add,
+	.del		= alpha_pmu_del,
+	.start		= alpha_pmu_start,
+	.stop		= alpha_pmu_stop,
+	.read		= alpha_pmu_read,
+};
+
+
+/*
+ * Main entry point - don't know when this is called but it
+ * obviously dumps debug info.
+ */
+void perf_event_print_debug(void)
+{
+	unsigned long flags;
+	unsigned long pcr;
+	int pcr0, pcr1;
+	int cpu;
+
+	if (!supported_cpu())
+		return;
+
+	local_irq_save(flags);
+
+	cpu = smp_processor_id();
+
+	pcr = wrperfmon(PERFMON_CMD_READ, 0);
+	pcr0 = (pcr >> alpha_pmu->pmc_count_shift[0]) & alpha_pmu->pmc_count_mask[0];
+	pcr1 = (pcr >> alpha_pmu->pmc_count_shift[1]) & alpha_pmu->pmc_count_mask[1];
+
+	pr_info("CPU#%d: PCTR0[%06x] PCTR1[%06x]\n", cpu, pcr0, pcr1);
+
+	local_irq_restore(flags);
+}
+
+
+/*
+ * Performance Monitoring Interrupt Service Routine called when a PMC
+ * overflows.  The PMC that overflowed is passed in la_ptr.
+ */
+static void alpha_perf_event_irq_handler(unsigned long la_ptr,
+					struct pt_regs *regs)
+{
+	struct cpu_hw_events *cpuc;
+	struct perf_sample_data data;
+	struct perf_event *event;
+	struct hw_perf_event *hwc;
+	int idx, j;
+
+	__get_cpu_var(irq_pmi_count)++;
+	cpuc = &__get_cpu_var(cpu_hw_events);
+
+	/* Completely counting through the PMC's period to trigger a new PMC
+	 * overflow interrupt while in this interrupt routine is utterly
+	 * disastrous!  The EV6 and EV67 counters are sufficiently large to
+	 * prevent this but to be really sure disable the PMCs.
+	 */
+	wrperfmon(PERFMON_CMD_DISABLE, cpuc->idx_mask);
+
+	/* la_ptr is the counter that overflowed. */
+	if (unlikely(la_ptr >= alpha_pmu->num_pmcs)) {
+		/* This should never occur! */
+		irq_err_count++;
+		pr_warning("PMI: silly index %ld\n", la_ptr);
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+		return;
+	}
+
+	idx = la_ptr;
+
+	perf_sample_data_init(&data, 0);
+	for (j = 0; j < cpuc->n_events; j++) {
+		if (cpuc->current_idx[j] == idx)
+			break;
+	}
+
+	if (unlikely(j == cpuc->n_events)) {
+		/* This can occur if the event is disabled right on a PMC overflow. */
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+		return;
+	}
+
+	event = cpuc->event[j];
+
+	if (unlikely(!event)) {
+		/* This should never occur! */
+		irq_err_count++;
+		pr_warning("PMI: No event at index %d!\n", idx);
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+		return;
+	}
+
+	hwc = &event->hw;
+	alpha_perf_event_update(event, hwc, idx, alpha_pmu->pmc_max_period[idx]+1);
+	data.period = event->hw.last_period;
+
+	if (alpha_perf_event_set_period(event, hwc, idx)) {
+		if (perf_event_overflow(event, 1, &data, regs)) {
+			/* Interrupts coming too quickly; "throttle" the
+			 * counter, i.e., disable it for a little while.
+			 */
+			alpha_pmu_stop(event, 0);
+		}
+	}
+	wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+
+	return;
+}
+
+
+
+/*
+ * Init call to initialise performance events at kernel startup.
+ */
+void __init init_hw_perf_events(void)
+{
+	pr_info("Performance events: ");
+
+	if (!supported_cpu()) {
+		pr_cont("No support for your CPU.\n");
+		return;
+	}
+
+	pr_cont("Supported CPU type!\n");
+
+	/* Override performance counter IRQ vector */
+
+	perf_irq = alpha_perf_event_irq_handler;
+
+	/* And set up PMU specification */
+	alpha_pmu = &ev67_pmu;
+
+	perf_pmu_register(&pmu);
+}
+
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 395a464353b8..3ec35066f1dc 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -356,7 +356,7 @@ dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt, struct thread_info *ti)
 	dest[27] = pt->r27;
 	dest[28] = pt->r28;
 	dest[29] = pt->gp;
-	dest[30] = rdusp();
+	dest[30] = ti == current_thread_info() ? rdusp() : ti->pcb.usp;
 	dest[31] = pt->pc;
 
 	/* Once upon a time this was the PS value.  Which is stupid
@@ -387,8 +387,9 @@ EXPORT_SYMBOL(dump_elf_task_fp);
  * sys_execve() executes a new program.
  */
 asmlinkage int
-do_sys_execve(char __user *ufilename, char __user * __user *argv,
-	      char __user * __user *envp, struct pt_regs *regs)
+do_sys_execve(const char __user *ufilename,
+	      const char __user *const __user *argv,
+	      const char __user *const __user *envp, struct pt_regs *regs)
 {
 	int error;
 	char *filename;
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 3d2627ec9860..d3e52d3fd592 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -156,9 +156,6 @@ extern void SMC669_Init(int);
 /* es1888.c */
 extern void es1888_init(void);
 
-/* ns87312.c */
-extern void ns87312_enable_ide(long ide_base);
-
 /* ../lib/fpreg.c */
 extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
 extern unsigned long alpha_read_fp_reg (unsigned long reg);
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index baa903602f6a..e2af5eb59bb4 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -269,7 +269,8 @@ void ptrace_disable(struct task_struct *child)
 	user_disable_single_step(child);
 }
 
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
 {
 	unsigned long tmp;
 	size_t copied;
@@ -292,7 +293,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	case PTRACE_PEEKUSR:
 		force_successful_syscall_return();
 		ret = get_reg(child, addr);
-		DBG(DBG_MEM, ("peek $%ld->%#lx\n", addr, ret));
+		DBG(DBG_MEM, ("peek $%lu->%#lx\n", addr, ret));
 		break;
 
 	/* When I and D space are separate, this will have to be fixed.  */
@@ -302,7 +303,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 
 	case PTRACE_POKEUSR: /* write the specified register */
-		DBG(DBG_MEM, ("poke $%ld<-%#lx\n", addr, data));
+		DBG(DBG_MEM, ("poke $%lu<-%#lx\n", addr, data));
 		ret = put_reg(child, addr, data);
 		break;
 	default:
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index 0932dbb1ef8e..6f7feb5db271 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -41,46 +41,20 @@ static void do_signal(struct pt_regs *, struct switch_stack *,
 /*
  * The OSF/1 sigprocmask calling sequence is different from the
  * C sigprocmask() sequence..
- *
- * how:
- * 1 - SIG_BLOCK
- * 2 - SIG_UNBLOCK
- * 3 - SIG_SETMASK
- *
- * We change the range to -1 .. 1 in order to let gcc easily
- * use the conditional move instructions.
- *
- * Note that we don't need to acquire the kernel lock for SMP
- * operation, as all of this is local to this thread.
  */
-SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask,
-		struct pt_regs *, regs)
+SYSCALL_DEFINE2(osf_sigprocmask, int, how, unsigned long, newmask)
 {
-	unsigned long oldmask = -EINVAL;
-
-	if ((unsigned long)how-1 <= 2) {
-		long sign = how-2;		/* -1 .. 1 */
-		unsigned long block, unblock;
-
-		newmask &= _BLOCKABLE;
-		spin_lock_irq(&current->sighand->siglock);
-		oldmask = current->blocked.sig[0];
-
-		unblock = oldmask & ~newmask;
-		block = oldmask | newmask;
-		if (!sign)
-			block = unblock;
-		if (sign <= 0)
-			newmask = block;
-		if (_NSIG_WORDS > 1 && sign > 0)
-			sigemptyset(&current->blocked);
-		current->blocked.sig[0] = newmask;
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-
-		regs->r0 = 0;		/* special no error return */
+	sigset_t oldmask;
+	sigset_t mask;
+	unsigned long res;
+
+	siginitset(&mask, newmask & _BLOCKABLE);
+	res = sigprocmask(how, &mask, &oldmask);
+	if (!res) {
+		force_successful_syscall_return();
+		res = oldmask.sig[0];
 	}
-	return oldmask;
+	return res;
 }
 
 SYSCALL_DEFINE3(osf_sigaction, int, sig,
@@ -94,9 +68,9 @@ SYSCALL_DEFINE3(osf_sigaction, int, sig,
 		old_sigset_t mask;
 		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
 		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_flags, &act->sa_flags))
+		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
+		    __get_user(mask, &act->sa_mask))
 			return -EFAULT;
-		__get_user(mask, &act->sa_mask);
 		siginitset(&new_ka.sa.sa_mask, mask);
 		new_ka.ka_restorer = NULL;
 	}
@@ -106,9 +80,9 @@ SYSCALL_DEFINE3(osf_sigaction, int, sig,
 	if (!ret && oact) {
 		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
 		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags))
+		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
+		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
 			return -EFAULT;
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
 	}
 
 	return ret;
@@ -144,8 +118,7 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
-asmlinkage int
-do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
+SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask)
 {
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
@@ -154,41 +127,6 @@ do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	/* Indicate EINTR on return from any possible signal handler,
-	   which will not come back through here, but via sigreturn.  */
-	regs->r0 = EINTR;
-	regs->r19 = 1;
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage int
-do_rt_sigsuspend(sigset_t __user *uset, size_t sigsetsize,
-		 struct pt_regs *regs, struct switch_stack *sw)
-{
-	sigset_t set;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-	if (copy_from_user(&set, uset, sizeof(set)))
-		return -EFAULT;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	/* Indicate EINTR on return from any possible signal handler,
-	   which will not come back through here, but via sigreturn.  */
-	regs->r0 = EINTR;
-	regs->r19 = 1;
-
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
 	set_thread_flag(TIF_RESTORE_SIGMASK);
@@ -239,6 +177,8 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	unsigned long usp;
 	long i, err = __get_user(regs->pc, &sc->sc_pc);
 
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	sw->r26 = (unsigned long) ret_from_sys_call;
 
 	err |= __get_user(regs->r0, sc->sc_regs+0);
@@ -591,7 +531,6 @@ syscall_restart(unsigned long r0, unsigned long r19,
 		regs->pc -= 4;
 		break;
 	case ERESTART_RESTARTBLOCK:
-		current_thread_info()->restart_block.fn = do_no_restart_syscall;
 		regs->r0 = EINTR;
 		break;
 	}
diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c
index 4afc1a1e2e5a..f0df3fbd8402 100644
--- a/arch/alpha/kernel/srm_env.c
+++ b/arch/alpha/kernel/srm_env.c
@@ -87,7 +87,7 @@ static int srm_env_proc_show(struct seq_file *m, void *v)
 	srm_env_t	*entry;
 	char		*page;
 
-	entry = (srm_env_t *)m->private;
+	entry = m->private;
 	page = (char *)__get_free_page(GFP_USER);
 	if (!page)
 		return -ENOMEM;
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index affd0f3f25df..14c8898d19ec 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -33,7 +33,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
-
+#include "pc873xx.h"
 
 /* Note mask bit is true for DISABLED irqs.  */
 static unsigned long cached_irq_mask = ~0UL;
@@ -236,17 +236,30 @@ cabriolet_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 static inline void __init
+cabriolet_enable_ide(void)
+{
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	 } else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		pc873xx_enable_ide();
+	}
+}
+
+static inline void __init
 cabriolet_init_pci(void)
 {
 	common_init_pci();
-	ns87312_enable_ide(0x398);
+	cabriolet_enable_ide();
 }
 
 static inline void __init
 cia_cab_init_pci(void)
 {
 	cia_init_pci();
-	ns87312_enable_ide(0x398);
+	cabriolet_enable_ide();
 }
 
 /*
diff --git a/arch/alpha/kernel/sys_takara.c b/arch/alpha/kernel/sys_takara.c
index 230464885b5c..4da596b6adbb 100644
--- a/arch/alpha/kernel/sys_takara.c
+++ b/arch/alpha/kernel/sys_takara.c
@@ -29,7 +29,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
-
+#include "pc873xx.h"
 
 /* Note mask bit is true for DISABLED irqs.  */
 static unsigned long cached_irq_mask[2] = { -1, -1 };
@@ -264,7 +264,14 @@ takara_init_pci(void)
 		alpha_mv.pci_map_irq = takara_map_irq_srm;
 
 	cia_init_pci();
-	ns87312_enable_ide(0x26e);
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+		pc873xx_enable_ide();
+	}
 }
 
 
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index 09acb786e72b..a6a1de9db16f 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -58,7 +58,7 @@ sys_call_table:
 	.quad sys_open				/* 45 */
 	.quad alpha_ni_syscall
 	.quad sys_getxgid
-	.quad osf_sigprocmask
+	.quad sys_osf_sigprocmask
 	.quad alpha_ni_syscall
 	.quad alpha_ni_syscall			/* 50 */
 	.quad sys_acct
@@ -512,6 +512,9 @@ sys_call_table:
 	.quad sys_pwritev
 	.quad sys_rt_tgsigqueueinfo
 	.quad sys_perf_event_open
+	.quad sys_fanotify_init
+	.quad sys_fanotify_mark				/* 495 */
+	.quad sys_prlimit64
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index 1efbed82c0fd..0f1d8493cfca 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -41,6 +41,7 @@
 #include <linux/init.h>
 #include <linux/bcd.h>
 #include <linux/profile.h>
+#include <linux/irq_work.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -82,6 +83,26 @@ static struct {
 
 unsigned long est_cycle_freq;
 
+#ifdef CONFIG_IRQ_WORK
+
+DEFINE_PER_CPU(u8, irq_work_pending);
+
+#define set_irq_work_pending_flag()  __get_cpu_var(irq_work_pending) = 1
+#define test_irq_work_pending()      __get_cpu_var(irq_work_pending)
+#define clear_irq_work_pending()     __get_cpu_var(irq_work_pending) = 0
+
+void set_irq_work_pending(void)
+{
+	set_irq_work_pending_flag();
+}
+
+#else  /* CONFIG_IRQ_WORK */
+
+#define test_irq_work_pending()      0
+#define clear_irq_work_pending()
+
+#endif /* CONFIG_IRQ_WORK */
+
 
 static inline __u32 rpcc(void)
 {
@@ -170,6 +191,11 @@ irqreturn_t timer_interrupt(int irq, void *dev)
 
 	write_sequnlock(&xtime_lock);
 
+	if (test_irq_work_pending()) {
+		clear_irq_work_pending();
+		irq_work_run();
+	}
+
 #ifndef CONFIG_SMP
 	while (nticks--)
 		update_process_times(user_mode(get_irq_regs()));
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index b14f015008ad..0414e021a91c 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -13,7 +13,6 @@
 #include <linux/sched.h>
 #include <linux/tty.h>
 #include <linux/delay.h>
-#include <linux/smp_lock.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kallsyms.h>
@@ -623,7 +622,6 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 		return;
 	}
 
-	lock_kernel();
 	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
 		pc, va, opcode, reg);
 	do_exit(SIGSEGV);
@@ -646,7 +644,6 @@ got_exception:
 	 * Yikes!  No one to forward the exception to.
 	 * Since the registers are in a weird format, dump them ourselves.
  	 */
-	lock_kernel();
 
 	printk("%s(%d): unhandled unaligned exception\n",
 	       current->comm, task_pid_nr(current));
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 98922f7d2d12..a19a5266d5fc 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1,15 +1,9 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Linux Kernel Configuration"
-
 config ARM
 	bool
 	default y
 	select HAVE_AOUT
 	select HAVE_IDE
+	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	select GENERIC_ATOMIC64 if (!CPU_32v6K)
@@ -18,12 +12,17 @@ config ARM
 	select HAVE_KPROBES if (!XIP_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
+	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_LZMA
+	select HAVE_IRQ_WORK
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
+	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -41,10 +40,6 @@ config SYS_SUPPORTS_APM_EMULATION
 config GENERIC_GPIO
 	bool
 
-config GENERIC_TIME
-	bool
-	default y
-
 config ARCH_USES_GETTIMEOFFSET
 	bool
 	default n
@@ -55,7 +50,7 @@ config GENERIC_CLOCKEVENTS
 config GENERIC_CLOCKEVENTS_BROADCAST
 	bool
 	depends on GENERIC_CLOCKEVENTS
-	default y if SMP && !LOCAL_TIMERS
+	default y if SMP
 
 config HAVE_TCM
 	bool
@@ -147,6 +142,9 @@ config ARCH_HAS_CPUFREQ
 	  and that the relevant menu configurations are displayed for
 	  it.
 
+config ARCH_HAS_CPU_IDLE_WAIT
+       def_bool y
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -273,7 +271,6 @@ config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
-	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -301,6 +298,7 @@ config ARCH_CNS3XXX
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
+	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
@@ -439,21 +437,6 @@ config ARCH_IXP4XX
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
-config ARCH_L7200
-	bool "LinkUp-L7200"
-	select CPU_ARM720T
-	select FIQ
-	select ARCH_USES_GETTIMEOFFSET
-	help
-	  Say Y here if you intend to run this kernel on a LinkUp Systems
-	  L7200 Software Development Board which uses an ARM720T processor.
-	  Information on this board can be obtained at:
-
-	  <http://www.linkupsys.com/>
-
-	  If you have any questions or comments about the Linux kernel port
-	  to this board, send e-mail to <sjhill@cotw.com>.
-
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select PCI
@@ -482,6 +465,19 @@ config ARCH_LOKI
 	help
 	  Support for the Marvell Loki (88RC8480) SoC.
 
+config ARCH_LPC32XX
+	bool "NXP LPC32XX"
+	select CPU_ARM926T
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_IDE
+	select ARM_AMBA
+	select USB_ARCH_HAS_OHCI
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	help
+	  Support for the NXP LPC32XX family of processors
+
 config ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	select CPU_FEROCEON
@@ -514,6 +510,7 @@ config ARCH_MMP
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	select PLAT_PXA
+	select SPARSE_IRQ
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
@@ -561,6 +558,19 @@ config ARCH_NUC93X
 	  Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
 	  low-power and high performance MPEG-4/JPEG multimedia controller chip.
 
+config ARCH_TEGRA
+	bool "NVIDIA Tegra"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select ARCH_HAS_BARRIERS if CACHE_L2X0
+	select ARCH_HAS_CPUFREQ
+	help
+	  This enables support for NVIDIA Tegra based systems (Tegra APX,
+	  Tegra 6xx and Tegra 2 series).
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
@@ -579,6 +589,7 @@ config ARCH_PXA
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	select PLAT_PXA
+	select SPARSE_IRQ
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
@@ -586,6 +597,7 @@ config ARCH_MSM
 	bool "Qualcomm MSM"
 	select HAVE_CLK
 	select GENERIC_CLOCKEVENTS
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Qualcomm MSM/QSD based systems.  This runs on the
 	  apps processor of the MSM/QSD and depends on a shared memory
@@ -634,6 +646,7 @@ config ARCH_S3C2410
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
+	select HAVE_S3C2410_I2C
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -663,17 +676,23 @@ config ARCH_S3C64XX
 	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT
+	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Samsung S3C64XX series based systems
 
-config ARCH_S5P6440
-	bool "Samsung S5P6440"
+config ARCH_S5P64X0
+	bool "Samsung S5P6440 S5P6450"
 	select CPU_V6
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select HAVE_S3C2410_WATCHDOG
 	select ARCH_USES_GETTIMEOFFSET
+	select HAVE_S3C2410_I2C
+	select HAVE_S3C_RTC
 	help
-	  Samsung S5P6440 CPU based systems
+	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
+	  SMDK6450.
 
 config ARCH_S5P6442
 	bool "Samsung S5P6442"
@@ -681,6 +700,7 @@ config ARCH_S5P6442
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Samsung S5P6442 CPU based systems
 
@@ -691,19 +711,40 @@ config ARCH_S5PC100
 	select CPU_V7
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
+	select HAVE_S3C2410_I2C
+	select HAVE_S3C_RTC
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Samsung S5PC100 series based systems
 
 config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
 	select CPU_V7
+	select ARCH_SPARSEMEM_ENABLE
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARM_L1_CACHE_SHIFT_6
+	select ARCH_HAS_CPUFREQ
 	select ARCH_USES_GETTIMEOFFSET
+	select HAVE_S3C2410_I2C
+	select HAVE_S3C_RTC
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
+config ARCH_S5PV310
+	bool "Samsung S5PV310/S5PC210"
+	select CPU_V7
+	select ARCH_SPARSEMEM_ENABLE
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select GENERIC_CLOCKEVENTS
+	select HAVE_S3C_RTC
+	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_WATCHDOG
+	help
+	  Samsung S5PV310 series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -716,10 +757,18 @@ config ARCH_SHARK
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
 
+config ARCH_TCC_926
+	bool "Telechips TCC ARM926-based systems"
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+	help
+	  Support for Telechips TCC ARM926-based systems.
+
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
 	select CPU_ARM922T
-	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_USES_GETTIMEOFFSET
 	help
@@ -782,7 +831,7 @@ config ARCH_OMAP
 	select GENERIC_CLOCKEVENTS
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
-	  Support for TI's OMAP platform (OMAP1 and OMAP2).
+	  Support for TI's OMAP platform (OMAP1/2/3/4).
 
 config PLAT_SPEAR
 	bool "ST SPEAr"
@@ -845,6 +894,8 @@ source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-loki/Kconfig"
 
+source "arch/arm/mach-lpc32xx/Kconfig"
+
 source "arch/arm/mach-msm/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
@@ -883,6 +934,8 @@ source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
+source "arch/arm/plat-tcc/Kconfig"
+
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
@@ -896,7 +949,7 @@ if ARCH_S3C64XX
 source "arch/arm/mach-s3c64xx/Kconfig"
 endif
 
-source "arch/arm/mach-s5p6440/Kconfig"
+source "arch/arm/mach-s5p64x0/Kconfig"
 
 source "arch/arm/mach-s5p6442/Kconfig"
 
@@ -904,10 +957,14 @@ source "arch/arm/mach-s5pc100/Kconfig"
 
 source "arch/arm/mach-s5pv210/Kconfig"
 
+source "arch/arm/mach-s5pv310/Kconfig"
+
 source "arch/arm/mach-shmobile/Kconfig"
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
 
+source "arch/arm/mach-tegra/Kconfig"
+
 source "arch/arm/mach-u300/Kconfig"
 
 source "arch/arm/mach-ux500/Kconfig"
@@ -966,7 +1023,7 @@ endif
 
 config ARM_ERRATA_411920
 	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
-	depends on CPU_V6 && !SMP
+	depends on CPU_V6
 	help
 	  Invalidation of the Instruction Cache operation can
 	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
@@ -1014,6 +1071,32 @@ config ARM_ERRATA_460075
 	  ACTLR register. Note that setting specific bits in the ACTLR register
 	  may not be available in non-secure mode.
 
+config ARM_ERRATA_742230
+	bool "ARM errata: DMB operation may be faulty"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 742230 Cortex-A9
+	  (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
+	  between two write operations may not ensure the correct visibility
+	  ordering of the two writes. This workaround sets a specific bit in
+	  the diagnostic register of the Cortex-A9 which causes the DMB
+	  instruction to behave as a DSB, ensuring the correct behaviour of
+	  the two writes.
+
+config ARM_ERRATA_742231
+	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 742231 Cortex-A9
+	  (r2p0..r2p2) erratum. Under certain conditions, specific to the
+	  Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
+	  accessing some data located in the same cache line, may get corrupted
+	  data due to bad handling of the address hazard when the line gets
+	  replaced from one of the CPUs at the same time as another CPU is
+	  accessing it. This workaround sets specific bits in the diagnostic
+	  register of the Cortex-A9 which reduces the linefill issuing
+	  capabilities of the processor.
+
 config PL310_ERRATA_588369
 	bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
 	depends on CACHE_L2X0 && ARCH_OMAP4
@@ -1027,15 +1110,36 @@ config PL310_ERRATA_588369
 	   is not correctly implemented in PL310 as clean lines are not
 	   invalidated as a result of these operations. Note that this errata
 	   uses Texas Instrument's secure monitor api.
+
+config ARM_ERRATA_720789
+	bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 720789 Cortex-A9 (prior to
+	  r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
+	  broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
+	  As a consequence of this erratum, some TLB entries which should be
+	  invalidated are not, resulting in an incoherency in the system page
+	  tables. The workaround changes the TLB flushing routines to invalidate
+	  entries regardless of the ASID.
+
+config ARM_ERRATA_743622
+	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 743622 Cortex-A9
+	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  optimisation in the Cortex-A9 Store Buffer may lead to data
+	  corruption. This workaround sets a specific bit in the diagnostic
+	  register of the Cortex-A9 which disables the Store Buffer
+	  optimisation, preventing the defect from occurring. This has no
+	  visible impact on the overall performance or power consumption of the
+	  processor.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
 
-config FORCE_MAX_ZONEORDER
-	int
-	depends on SA1111
-	default "9"
-
 menu "Bus support"
 
 config ARM_AMBA
@@ -1060,7 +1164,7 @@ config ISA_DMA_API
 	bool
 
 config PCI
-	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
+	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -1098,12 +1202,13 @@ source "kernel/time/Kconfig"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
-		 ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+	depends on EXPERIMENTAL
 	depends on GENERIC_CLOCKEVENTS
+	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
+		 ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+	select HAVE_ARM_SCU
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1117,10 +1222,23 @@ config SMP
 
 	  See also <file:Documentation/i386/IO-APIC.txt>,
 	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
-	  <http://www.linuxdoc.org/docs.html#howto>.
+	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
 	  If you don't know what to do here, say N.
 
+config SMP_ON_UP
+	bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on SMP && !XIP && !THUMB2_KERNEL
+	default y
+	help
+	  SMP kernels contain instructions which fail on non-SMP processors.
+	  Enabling this option allows the kernel to modify itself to make
+	  these instructions safe.  Disabling it allows about 1K of space
+	  savings.
+
+	  If you don't know what to do here, say Y.
+
 config HAVE_ARM_SCU
 	bool
 	depends on SMP
@@ -1171,10 +1289,9 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+	depends on SMP
 	default y
-	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+	select HAVE_ARM_TWD
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -1185,10 +1302,11 @@ source kernel/Kconfig.preempt
 
 config HZ
 	int
-	default 128 if ARCH_L7200
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
+	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
+		ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
+	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
 	default 100
 
 config THUMB2_KERNEL
@@ -1241,10 +1359,6 @@ config OABI_COMPAT
 config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
 
-# Discontigmem is deprecated
-config ARCH_DISCONTIGMEM_ENABLE
-	bool
-
 config ARCH_SPARSEMEM_ENABLE
 	bool
 
@@ -1252,13 +1366,7 @@ config ARCH_SPARSEMEM_DEFAULT
 	def_bool ARCH_SPARSEMEM_ENABLE
 
 config ARCH_SELECT_MEMORY_MODEL
-	def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
-
-config NODES_SHIFT
-	int
-	default "4" if ARCH_LH7A40X
-	default "2"
-	depends on NEED_MULTIPLE_NODES
+	def_bool ARCH_SPARSEMEM_ENABLE
 
 config HIGHMEM
 	bool "High Memory Support (EXPERIMENTAL)"
@@ -1290,8 +1398,33 @@ config HW_PERF_EVENTS
 	  Enable hardware performance counter support for perf events. If
 	  disabled, perf events will use software events only.
 
+config SPARSE_IRQ
+	def_bool n
+	help
+	  This enables support for sparse irqs. This is useful in general
+	  as most CPUs have a fairly sparse array of IRQ vectors, which
+	  the irq_desc then maps directly on to. Systems with a high
+	  number of off-chip IRQs will want to treat this as
+	  experimental until they have been independently verified.
+
 source "mm/Kconfig"
 
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order" if ARCH_SHMOBILE
+	range 11 64 if ARCH_SHMOBILE
+	default "9" if SA1111
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
 config LEDS
 	bool "Timer and CPU usage LEDs"
 	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
@@ -1375,6 +1508,38 @@ config UACCESS_WITH_MEMCPY
 	  However, if the CPU data cache is using a write-allocate mode,
 	  this option is unlikely to provide any performance gain.
 
+config SECCOMP
+	bool
+	prompt "Enable seccomp to safely compute untrusted bytecode"
+	---help---
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
+config CC_STACKPROTECTOR
+	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+	help
+	  This option turns on the -fstack-protector GCC feature. This
+	  feature puts, at the beginning of functions, a canary value on
+	  the stack just before the return address, and validates
+	  the value just before actually returning.  Stack based buffer
+	  overflows (that need to overwrite this return address) now also
+	  overwrite the canary, which gets detected and the attack is then
+	  neutralized via a kernel panic.
+	  This feature requires gcc version 4.2 or above.
+
+config DEPRECATED_PARAM_STRUCT
+	bool "Provide old way to pass kernel parameters"
+	help
+	  This was deprecated in 2001 and announced to live on for 5 years.
+	  Some old boot loaders still use this way.
+
 endmenu
 
 menu "Boot options"
@@ -1485,6 +1650,16 @@ config ATAGS_PROC
 	  Should the atags used to boot the kernel be exported in an "atags"
 	  file in procfs. Useful with kexec.
 
+config AUTO_ZRELADDR
+	bool "Auto calculation of the decompressed kernel image address"
+	depends on !ZBOOT_ROM && !ARCH_U300
+	help
+	  ZRELADDR is the physical address where the decompressed kernel
+	  image will be placed. If AUTO_ZRELADDR is selected, the address
+	  will be determined at run-time by masking the current IP with
+	  0xf8000000. This assumes the zImage being placed in the first 128MB
+	  from start of memory.
+
 endmenu
 
 menu "CPU Power Management"
@@ -1493,6 +1668,12 @@ if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
+config CPU_FREQ_IMX
+	tristate "CPUfreq driver for i.MX CPUs"
+	depends on ARCH_MXC && CPU_FREQ
+	help
+	  This enables the CPUfreq driver for i.MX CPUs.
+
 config CPU_FREQ_SA1100
 	bool
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 91344af75f39..2fd0b99afc4b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -2,6 +2,20 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config STRICT_DEVMEM
+	bool "Filter access to /dev/mem"
+	depends on MMU
+	---help---
+	  If this option is disabled, you allow userspace (root) access to all
+	  of memory, including kernel and userspace memory. Accidental
+	  access to this is obviously disastrous, but specific access can
+	  be used by people debugging the kernel.
+
+	  If this option is switched on, the /dev/mem file only allows
+	  userspace access to memory mapped peripherals.
+
+          If in doubt, say Y.
+
 # RMK wants arm kernels compiled with frame pointers or stack unwinding.
 # If you know what you are doing and are willing to live without stack
 # traces, you can get a slightly smaller kernel by setting this option to
@@ -27,6 +41,11 @@ config ARM_UNWIND
 	  the performance is not affected. Currently, this feature
 	  only works with EABI compilers. If unsure say Y.
 
+config OLD_MCOUNT
+	bool
+	depends on FUNCTION_TRACER && FRAME_POINTER
+	default y
+
 config DEBUG_USER
 	bool "Verbose user fault messages"
 	help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 64ba313724d2..b87aed028eef 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -21,6 +21,9 @@ GZFLAGS		:=-9
 # Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
 KBUILD_CFLAGS	+=$(call cc-option,-marm,)
 
+# Never generate .eh_frame
+KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
+
 # Do not use arch/arm/defconfig - it's always outdated.
 # Select a platform tht is kept up-to-date
 KBUILD_DEFCONFIG := versatile_defconfig
@@ -34,6 +37,10 @@ ifeq ($(CONFIG_FRAME_POINTER),y)
 KBUILD_CFLAGS	+=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
 endif
 
+ifeq ($(CONFIG_CC_STACKPROTECTOR),y)
+KBUILD_CFLAGS	+=-fstack-protector
+endif
+
 ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
 KBUILD_CPPFLAGS	+= -mbig-endian
 AS		+= -EB
@@ -139,14 +146,14 @@ machine-$(CONFIG_ARCH_IXP23XX)		:= ixp23xx
 machine-$(CONFIG_ARCH_IXP4XX)		:= ixp4xx
 machine-$(CONFIG_ARCH_KIRKWOOD)		:= kirkwood
 machine-$(CONFIG_ARCH_KS8695)		:= ks8695
-machine-$(CONFIG_ARCH_L7200)		:= l7200
 machine-$(CONFIG_ARCH_LH7A40X)		:= lh7a40x
 machine-$(CONFIG_ARCH_LOKI) 		:= loki
+machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx
 machine-$(CONFIG_ARCH_MMP)		:= mmp
 machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
-machine-$(CONFIG_ARCH_MX1)		:= mx1
-machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX1)		:= imx
+machine-$(CONFIG_ARCH_MX2)		:= imx
 machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_MX5)		:= mx5
@@ -166,15 +173,18 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
-machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
+machine-$(CONFIG_ARCH_S5P64X0)		:= s5p64x0
 machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
 machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
+machine-$(CONFIG_ARCH_S5PV310)		:= s5pv310
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
+machine-$(CONFIG_ARCH_TCC8K)		:= tcc8k
+machine-$(CONFIG_ARCH_TEGRA)		:= tegra
 machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_U8500)		:= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
@@ -193,6 +203,7 @@ plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
 plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
+plat-$(CONFIG_ARCH_TCC_926)	:= tcc
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
@@ -236,13 +247,14 @@ ifeq ($(FASTFPE),$(wildcard $(FASTFPE)))
 FASTFPE_OBJ	:=$(FASTFPE)/
 endif
 
-# If we have a machine-specific directory, then include it in the build.
-core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= $(machdirs) $(platdirs)
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
+# If we have a machine-specific directory, then include it in the build.
+core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
+core-y				+= $(machdirs) $(platdirs)
+
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 864a002137fe..65a7c1c588a9 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -4,6 +4,7 @@
 # create a compressed vmlinuz image from the original vmlinux
 #
 
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
 HEAD	= head.o
 OBJS	= misc.o decompress.o
 FONTC	= $(srctree)/drivers/video/console/font_acorn_8x8.c
@@ -19,10 +20,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y)
 OBJS		+= head-shark.o ofw-shark.o
 endif
 
-ifeq ($(CONFIG_ARCH_L7200),y)
-OBJS		+= head-l7200.o
-endif
-
 ifeq ($(CONFIG_ARCH_P720T),y)
 # Borrow this code from SA1100
 OBJS		+= head-sa1100.o
@@ -36,7 +33,7 @@ ifeq ($(CONFIG_CPU_XSCALE),y)
 OBJS		+= head-xscale.o
 endif
 
-ifeq ($(CONFIG_PXA_SHARPSL),y)
+ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y)
 OBJS		+= head-sharpsl.o
 endif
 
@@ -82,19 +79,13 @@ endif
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  := -Wa,-march=all
 
-# Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via
-# linker symbols.  We only define initrd_phys and params_phys if the
-# machine class defined the corresponding makefile variable.
+# Supply ZRELADDR to the decompressor via a linker symbol.
+ifneq ($(CONFIG_AUTO_ZRELADDR),y)
 LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+endif
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
-ifneq ($(INITRD_PHYS),)
-LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
-endif
-ifneq ($(PARAMS_PHYS),)
-LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
-endif
 # ?
 LDFLAGS_vmlinux += -p
 # Report unresolved symbol references
@@ -125,5 +116,5 @@ CFLAGS_font.o := -Dstatic=
 $(obj)/font.c: $(FONTC)
 	$(call cmd,shipped)
 
-$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
 	@sed "$(SEDFLAGS)" < $< > $@
diff --git a/arch/arm/boot/compressed/Makefile.debug b/arch/arm/boot/compressed/Makefile.debug
deleted file mode 100644
index 491a037b2973..000000000000
--- a/arch/arm/boot/compressed/Makefile.debug
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# linux/arch/arm/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-COMPRESSED_EXTRA=../../lib/ll_char_wr.o
-OBJECTS=misc-debug.o ll_char_wr.aout.o
-
-CFLAGS=-D__KERNEL__ -O2 -DSTDC_HEADERS -DSTANDALONE_DEBUG -Wall -I../../../../include -c
-
-test-gzip: piggy.aout.o $(OBJECTS)
-	$(CC) -o $@ $(OBJECTS) piggy.aout.o
-
-misc-debug.o: misc.c
-	$(CC) $(CFLAGS) -o $@ misc.c
-
-piggy.aout.o: piggy.o
-	arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux piggy.o piggy.aout.o
-
-ll_char_wr.aout.o: $(COMPRESSED_EXTRA)
-	arm-linuxelf-objcopy --change-leading-char -I elf32-arm -O arm-aout32-linux $(COMPRESSED_EXTRA) ll_char_wr.aout.o
-
diff --git a/arch/arm/boot/compressed/head-l7200.S b/arch/arm/boot/compressed/head-l7200.S
deleted file mode 100644
index d0e3b20856cd..000000000000
--- a/arch/arm/boot/compressed/head-l7200.S
+++ /dev/null
@@ -1,29 +0,0 @@
-/* 
- * linux/arch/arm/boot/compressed/head-l7200.S
- * 
- * Copyright (C) 2000 Steve Hill <sjhill@cotw.com>
- * 
- * Some code borrowed from Nicolas Pitre's 'head-sa1100.S' file. This
- * is merged with head.S by the linker.
- */
-
-#include <asm/mach-types.h>
-
-#ifndef CONFIG_ARCH_L7200
-#error What am I doing here...
-#endif
-
-		.section        ".start", "ax"
-
-__L7200_start:
-		mov	r0, #0x00100000		@ FLASH address of initrd
-		mov	r2, #0xf1000000		@ RAM address of initrd
-		add	r3, r2, #0x00700000	@ Size of initrd 
-1:
-		ldmia   r0!, {r4, r5, r6, r7}
-		stmia   r2!, {r4, r5, r6, r7}
-		cmp	r2, r3
-		ble	1b
-
-		mov	r8, #0			@ Zero it out
-		mov	r7, #MACH_TYPE_L7200	@ Set architecture ID
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index c5191b1532e8..6825c34646d4 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -170,9 +170,15 @@ not_angel:
 
 		.text
 		adr	r0, LC0
- ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
- THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip}	)
- THUMB(		ldr	sp, [r0, #32]				)
+		ldmia	r0, {r1, r2, r3, r5, r6, r11, ip}
+		ldr	sp, [r0, #28]
+#ifdef CONFIG_AUTO_ZRELADDR
+		@ determine final kernel image address
+		and	r4, pc, #0xf8000000
+		add	r4, r4, #TEXT_OFFSET
+#else
+		ldr	r4, =zreladdr
+#endif
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are
@@ -310,18 +316,17 @@ wont_overwrite:	mov	r0, r4
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
-		.word	zreladdr		@ r4
 		.word	_start			@ r5
 		.word	_image_size		@ r6
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
-		.word	user_stack+4096		@ sp
+		.word	user_stack_end		@ sp
 LC1:		.word	reloc_end - reloc_start
 		.size	LC0, . - LC0
 
 #ifdef CONFIG_ARCH_RPC
 		.globl	params
-params:		ldr	r0, =params_phys
+params:		ldr	r0, =0x10000100		@ params_phys for RPC
 		mov	pc, lr
 		.ltorg
 		.align
@@ -339,9 +344,8 @@ params:		ldr	r0, =params_phys
  *  r4 = kernel execution address
  *  r7 = architecture number
  *  r8 = atags pointer
- *  r9 = run-time address of "start"  (???)
  * On exit,
- *  r1, r2, r3, r9, r10, r12 corrupted
+ *  r0, r1, r2, r3, r9, r10, r12 corrupted
  * This routine must preserve:
  *  r4, r5, r6, r7, r8
  */
@@ -396,12 +400,18 @@ __armv3_mpu_cache_on:
 
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		/*
+		 * ?? ARMv3 MMU does not allow reading the control register,
+		 * does this really work on ARMv3 MPU?
+		 */
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 						@ .... .... .... WC.M
 		orr	r0, r0, #0x000d		@ .... .... .... 11.1
+		/* ?? this overwrites the value constructed above? */
 		mov	r0, #0
 		mcr	p15, 0, r0, c1, c0, 0	@ write control reg
 
+		/* ?? invalidate for the second time? */
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr
 
@@ -771,8 +781,10 @@ proc_types:
  * Turn off the Cache and MMU.  ARMv3 does not support
  * reading the control register, but ARMv4 does.
  *
- * On exit, r0, r1, r2, r3, r9, r12 corrupted
- * This routine must preserve: r4, r6, r7
+ * On exit,
+ *  r0, r1, r2, r3, r9, r12 corrupted
+ * This routine must preserve:
+ *  r4, r6, r7
  */
 		.align	5
 cache_off:	mov	r3, #12			@ cache_off function
@@ -845,7 +857,7 @@ __armv3_mmu_cache_off:
  * Clean and flush the cache to maintain consistency.
  *
  * On exit,
- *  r1, r2, r3, r9, r11, r12 corrupted
+ *  r1, r2, r3, r9, r10, r11, r12 corrupted
  * This routine must preserve:
  *  r0, r4, r5, r6, r7
  */
@@ -988,7 +1000,7 @@ no_cache_id:
 __armv3_mmu_cache_flush:
 __armv3_mpu_cache_flush:
 		mov	r1, #0
-		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mcr	p15, 0, r1, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr
 
 /*
@@ -1001,6 +1013,7 @@ __armv3_mpu_cache_flush:
 phexbuf:	.space	12
 		.size	phexbuf, . - phexbuf
 
+@ phex corrupts {r0, r1, r2, r3}
 phex:		adr	r3, phexbuf
 		mov	r2, #0
 		strb	r2, [r3, r1]
@@ -1015,6 +1028,7 @@ phex:		adr	r3, phexbuf
 		strb	r2, [r3, r1]
 		b	1b
 
+@ puts corrupts {r0, r1, r2, r3}
 puts:		loadsp	r3, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
@@ -1029,12 +1043,14 @@ puts:		loadsp	r3, r1
 		teq	r0, #0
 		bne	1b
 		mov	pc, lr
+@ putc corrupts {r0, r1, r2, r3}
 putc:
 		mov	r2, r0
 		mov	r0, #0
 		loadsp	r3, r1
 		b	2b
 
+@ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
 memdump:	mov	r12, r0
 		mov	r10, lr
 		mov	r11, #0
@@ -1070,3 +1086,4 @@ reloc_end:
 		.align
 		.section ".stack", "w"
 user_stack:	.space	4096
+user_stack_end:
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index d2b2ef41cd4f..e653a6d3c8d9 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -28,9 +28,6 @@ unsigned int __machine_arch_type;
 
 #include <asm/unaligned.h>
 
-#ifdef STANDALONE_DEBUG
-#define putstr printf
-#else
 
 static void putstr(const char *ptr);
 extern void error(char *x);
@@ -116,7 +113,6 @@ static void putstr(const char *ptr)
 	flush();
 }
 
-#endif
 
 void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
@@ -186,7 +182,6 @@ asmlinkage void __div0(void)
 
 extern void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
 
-#ifndef STANDALONE_DEBUG
 
 unsigned long
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
@@ -211,18 +206,3 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	putstr(" done, booting the kernel.\n");
 	return output_ptr;
 }
-#else
-
-char output_buffer[1500*1024];
-
-int main()
-{
-	output_data = output_buffer;
-
-	putstr("Uncompressing Linux...");
-	decompress(input_data, input_data_end - input_data,
-			NULL, NULL, output_data, NULL, error);
-	putstr("done.\n");
-	return 0;
-}
-#endif
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 337741f734ac..ada6359160eb 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -67,25 +67,11 @@ static inline unsigned int gic_irq(unsigned int irq)
 
 /*
  * Routines to acknowledge, disable and enable interrupts
- *
- * Linux assumes that when we're done with an interrupt we need to
- * unmask it, in the same way we need to unmask an interrupt when
- * we first enable it.
- *
- * The GIC has a separate notion of "end of interrupt" to re-enable
- * an interrupt after handling, in order to support hardware
- * prioritisation.
- *
- * We can make the GIC behave in the way that Linux expects by making
- * our "acknowledge" routine disable the interrupt, then mark it as
- * complete.
  */
 static void gic_ack_irq(unsigned int irq)
 {
-	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
 	writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
 	spin_unlock(&irq_controller_lock);
 }
@@ -108,6 +94,51 @@ static void gic_unmask_irq(unsigned int irq)
 	spin_unlock(&irq_controller_lock);
 }
 
+static int gic_set_type(unsigned int irq, unsigned int type)
+{
+	void __iomem *base = gic_dist_base(irq);
+	unsigned int gicirq = gic_irq(irq);
+	u32 enablemask = 1 << (gicirq % 32);
+	u32 enableoff = (gicirq / 32) * 4;
+	u32 confmask = 0x2 << ((gicirq % 16) * 2);
+	u32 confoff = (gicirq / 16) * 4;
+	bool enabled = false;
+	u32 val;
+
+	/* Interrupt configuration for SGIs can't be changed */
+	if (gicirq < 16)
+		return -EINVAL;
+
+	if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
+		return -EINVAL;
+
+	spin_lock(&irq_controller_lock);
+
+	val = readl(base + GIC_DIST_CONFIG + confoff);
+	if (type == IRQ_TYPE_LEVEL_HIGH)
+		val &= ~confmask;
+	else if (type == IRQ_TYPE_EDGE_RISING)
+		val |= confmask;
+
+	/*
+	 * As recommended by the spec, disable the interrupt before changing
+	 * the configuration
+	 */
+	if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+		writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+		enabled = true;
+	}
+
+	writel(val, base + GIC_DIST_CONFIG + confoff);
+
+	if (enabled)
+		writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+
+	spin_unlock(&irq_controller_lock);
+
+	return 0;
+}
+
 #ifdef CONFIG_SMP
 static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 {
@@ -161,6 +192,7 @@ static struct irq_chip gic_chip = {
 	.ack		= gic_ack_irq,
 	.mask		= gic_mask_irq,
 	.unmask		= gic_unmask_irq,
+	.set_type	= gic_set_type,
 #ifdef CONFIG_SMP
 	.set_affinity	= gic_set_cpu,
 #endif
diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c
index 9a7f09cff300..2dc6da70ae59 100644
--- a/arch/arm/common/icst.c
+++ b/arch/arm/common/icst.c
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  *
  *  Support functions for calculating clocks/divisors for the ICST307
- *  clock generators.  See http://www.icst.com/ for more information
+ *  clock generators.  See http://www.idt.com/ for more information
  *  on these devices.
  *
  *  This is an almost identical implementation to the ICST525 clock generator.
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 7974baacafce..1bec96e85196 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -271,6 +271,14 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
 		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
 }
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (mask >= PHYS_OFFSET + SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	it8152_io.start = IT8152_IO_BASE + 0x12000;
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index 5ebbab6242a7..8f0f86db3602 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -146,8 +146,7 @@
 #define DESIGNER	0x41
 #define REVISION	0x0
 #define INTEG_CFG	0x0
-#define PERIPH_ID_VAL	((PART << 0) | (DESIGNER << 12) \
-			  | (REVISION << 20) | (INTEG_CFG << 24))
+#define PERIPH_ID_VAL	((PART << 0) | (DESIGNER << 12))
 
 #define PCELL_ID_VAL	0xb105f00d
 
@@ -1859,10 +1858,10 @@ int pl330_add(struct pl330_info *pi)
 	regs = pi->base;
 
 	/* Check if we can handle this DMAC */
-	if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL
+	if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL
 	   || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
 		dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
-			readl(regs + PERIPH_ID), readl(regs + PCELL_ID));
+			get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID));
 		return -EINVAL;
 	}
 
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 9eaf65f43642..c0258a8c103b 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -185,13 +185,10 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	},
 };
 
-void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes)
 {
 	unsigned int sz = SZ_1M >> PAGE_SHIFT;
 
-	if (node != 0)
-		sz = 0;
-
 	size[1] = size[0] - sz;
 	size[0] = sz;
 }
@@ -681,7 +678,7 @@ out:
  *	%-EBUSY		physical address already marked in-use.
  *	%0		successful.
  */
-static int
+static int __devinit
 __sa1111_probe(struct device *me, struct resource *mem, int irq)
 {
 	struct sa1111 *sachip;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 9012004321dd..c11af1e4bad3 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -44,12 +44,12 @@ void reset_scoop(struct device *dev)
 {
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
 
-	iowrite16(0x0100, sdev->base + SCOOP_MCR);  // 00
-	iowrite16(0x0000, sdev->base + SCOOP_CDR);  // 04
-	iowrite16(0x0000, sdev->base + SCOOP_CCR);  // 10
-	iowrite16(0x0000, sdev->base + SCOOP_IMR);  // 18
-	iowrite16(0x00FF, sdev->base + SCOOP_IRM);  // 14
-	iowrite16(0x0000, sdev->base + SCOOP_ISR);  // 1C
+	iowrite16(0x0100, sdev->base + SCOOP_MCR);  /* 00 */
+	iowrite16(0x0000, sdev->base + SCOOP_CDR);  /* 04 */
+	iowrite16(0x0000, sdev->base + SCOOP_CCR);  /* 10 */
+	iowrite16(0x0000, sdev->base + SCOOP_IMR);  /* 18 */
+	iowrite16(0x00FF, sdev->base + SCOOP_IRM);  /* 14 */
+	iowrite16(0x0000, sdev->base + SCOOP_ISR);  /* 1C */
 	iowrite16(0x0000, sdev->base + SCOOP_IRM);
 }
 
diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c
index b520e56216a9..bef408f3d76c 100644
--- a/arch/arm/common/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -312,16 +312,16 @@ static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b)
 		b1 = (gpr_a[i] >> 8) & 0xff;
 		b0 = gpr_a[i] & 0xff;
 
-		// immed[@ai, (b1 << 8) | b0]
-		// 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII
+		/* immed[@ai, (b1 << 8) | b0] */
+		/* 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII */
 		ucode[offset++] = 0xf0;
 		ucode[offset++] = (b1 >> 4);
 		ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6);
 		ucode[offset++] = (b0 << 2);
 		ucode[offset++] = 0x80 | i;
 
-		// immed_w1[@ai, (b3 << 8) | b2]
-		// 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII
+		/* immed_w1[@ai, (b3 << 8) | b2] */
+		/* 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII */
 		ucode[offset++] = 0xf4;
 		ucode[offset++] = 0x40 | (b3 >> 4);
 		ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6);
@@ -340,16 +340,16 @@ static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b)
 		b1 = (gpr_b[i] >> 8) & 0xff;
 		b0 = gpr_b[i] & 0xff;
 
-		// immed[@bi, (b1 << 8) | b0]
-		// 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV
+		/* immed[@bi, (b1 << 8) | b0] */
+		/* 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV */
 		ucode[offset++] = 0xf0;
 		ucode[offset++] = (b1 >> 4);
 		ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6);
 		ucode[offset++] = (i << 2) | 0x03;
 		ucode[offset++] = b0;
 
-		// immed_w1[@bi, (b3 << 8) | b2]
-		// 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV
+		/* immed_w1[@bi, (b3 << 8) | b2] */
+		/* 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV */
 		ucode[offset++] = 0xf4;
 		ucode[offset++] = 0x40 | (b3 >> 4);
 		ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6);
@@ -357,7 +357,7 @@ static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b)
 		ucode[offset++] = b2;
 	}
 
-	// ctx_arb[kill]
+	/* ctx_arb[kill] */
 	ucode[offset++] = 0xe0;
 	ucode[offset++] = 0x00;
 	ucode[offset++] = 0x01;
diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig
deleted file mode 100644
index ad2bc503f2b8..000000000000
--- a/arch/arm/configs/am3517_evm_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3517EVM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_CAN=y
-CONFIG_CAN_RAW=y
-CONFIG_CAN_BCM=y
-CONFIG_CAN_VCAN=y
-CONFIG_CAN_DEV=y
-CONFIG_CAN_CALC_BITTIMING=y
-CONFIG_CAN_TI_HECC=y
-CONFIG_CAN_DEBUG_DEVICES=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_GENERIC=y
-CONFIG_PANEL_SHARP_LQ043T1DG01=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index f1bac70d6ce9..9e90e6d79297 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -13,6 +13,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G20=y
 CONFIG_MACH_AT91SAM9G20EK=y
+CONFIG_MACH_AT91SAM9G20EK_2MMC=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
deleted file mode 100644
index 8bb06334ce9c..000000000000
--- a/arch/arm/configs/cm_t35_defconfig
+++ /dev/null
@@ -1,157 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_CM_T35=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_LIB80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_TWL4030=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index ba6670556f78..cdc40c4b8c48 100644
--- a/arch/arm/configs/da8xx_omapl_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -17,6 +17,8 @@ CONFIG_MODVERSIONS=y
 CONFIG_ARCH_DAVINCI=y
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
+CONFIG_MACH_MITYOMAPL138=y
+CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -79,6 +81,7 @@ CONFIG_I2C_DAVINCI=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DUMMY=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_FB=y
 CONFIG_FB_DA8XX=y
diff --git a/arch/arm/configs/devkit8000_defconfig b/arch/arm/configs/devkit8000_defconfig
deleted file mode 100644
index 786cbe49528e..000000000000
--- a/arch/arm/configs/devkit8000_defconfig
+++ /dev/null
@@ -1,184 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_DEVKIT8000=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root  delay=3"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_BT=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=40960
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_MATRIX=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_SERIO_RAW=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_RAW_DRIVER=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_OMAP2_DSS=y
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_GENERIC=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=m
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig
deleted file mode 100644
index fcda057d5844..000000000000
--- a/arch/arm/configs/igep0020_defconfig
+++ /dev/null
@@ -1,179 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_IGEP0020=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_SDIO=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_SSB=m
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=14
-# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_VENC is not set
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_OMAP2_DSS_USE_DSI_PLL=y
-CONFIG_FB_OMAP2=y
-# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-CONFIG_PANEL_GENERIC=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_IGEP0020=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index f2e3a9088df6..2f7042813765 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -13,11 +13,20 @@ CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
+CONFIG_MACH_ESATA_SHEEVAPLUG=y
+CONFIG_MACH_GURUPLUG=y
+CONFIG_MACH_DOCKSTAR=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
 CONFIG_MACH_OPENRD_BASE=y
 CONFIG_MACH_OPENRD_CLIENT=y
+CONFIG_MACH_OPENRD_ULTIMATE=y
 CONFIG_MACH_NETSPACE_V2=y
+CONFIG_MACH_INETSPACE_V2=y
+CONFIG_MACH_NETSPACE_MAX_V2=y
+CONFIG_MACH_NET2BIG_V2=y
+CONFIG_MACH_NET5BIG_V2=y
+CONFIG_MACH_T5325=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig
deleted file mode 100644
index 816fc42884c9..000000000000
--- a/arch/arm/configs/lusl7200_defconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
-CONFIG_ARCH_L7200=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x00010000
-CONFIG_ZBOOT_ROM_BSS=0xf03e0000
-CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE="console=tty0 console=ttyLU1,115200 root=/dev/ram initrd=0xf1000000,0x005dac7b mem=32M"
-CONFIG_BINFMT_AOUT=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_EXT2_FS=y
-CONFIG_DEBUG_USER=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index b2038b0e266f..813cfb366c18 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -21,8 +21,14 @@ CONFIG_ARCH_MX2=y
 CONFIG_MACH_MX27=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
+CONFIG_MACH_CPUIMX27=y
+CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
+CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
 CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_IMX27LITE=y
+CONFIG_MACH_PCA100=y
+CONFIG_MACH_MXT_TD60=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
@@ -76,7 +82,9 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
 # CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
@@ -85,19 +93,20 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
+CONFIG_SPI_IMX=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_IMX=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=m
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
 CONFIG_RTC_CLASS=y
diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig
deleted file mode 100644
index 2d29329749e4..000000000000
--- a/arch/arm/configs/mx31pdk_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_MACH_MX31ADS is not set
-CONFIG_MACH_MX31_3DS=y
-CONFIG_AEABI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 161f907b611f..f0c339fd5d21 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -24,6 +24,7 @@ CONFIG_MACH_PCM043=y
 CONFIG_MACH_ARMADILLO5X0=y
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_EUKREA_CPUIMX35=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
@@ -108,7 +109,6 @@ CONFIG_MMC=y
 CONFIG_MMC_MXC=y
 CONFIG_DMADEVICES=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_UBIFS_FS=y
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index a665ecbbe2bc..5c7a87260fab 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -15,6 +15,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_ARCH_MXC=y
 CONFIG_ARCH_MX5=y
 CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_MACH_MX51_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX51=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -69,7 +71,6 @@ CONFIG_REALTEK_PHY=y
 CONFIG_NATIONAL_PHY=y
 CONFIG_STE10XP=y
 CONFIG_LSI_ET1011C_PHY=y
-CONFIG_FIXED_PHY=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_GPIO=y
 CONFIG_NET_ETHERNET=y
@@ -81,6 +82,7 @@ CONFIG_FEC=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_EVBUG=m
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
@@ -100,7 +102,6 @@ CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
@@ -117,13 +118,11 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -136,6 +135,7 @@ CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -151,7 +151,6 @@ CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -159,7 +158,6 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_KEYS=y
 CONFIG_SECURITYFS=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
deleted file mode 100644
index 56aebb69411d..000000000000
--- a/arch/arm/configs/n8x0_defconfig
+++ /dev/null
@@ -1,94 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_MBOX_FWK=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_MACH_NOKIA_N8X0=y
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x10C08000
-CONFIG_ZBOOT_ROM_BSS=0x10200000
-CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_ONENAND_OTP=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-# CONFIG_HWMON is not set
-CONFIG_MENELAUS=y
-CONFIG_REGULATOR=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_EEM=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
new file mode 100644
index 000000000000..ccedde1371c3
--- /dev/null
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -0,0 +1,293 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_OMAP2=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_MACH_OMAP_GENERIC=y
+CONFIG_ARCH_OMAP2420=y
+CONFIG_ARCH_OMAP2430=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_MACH_OMAP_H4=y
+CONFIG_MACH_OMAP_APOLLON=y
+CONFIG_MACH_OMAP_2430SDP=y
+CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_DEVKIT8000=y
+CONFIG_MACH_OMAP_LDP=y
+CONFIG_MACH_OVERO=y
+CONFIG_MACH_OMAP3EVM=y
+CONFIG_MACH_OMAP3517EVM=y
+CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP3_TOUCHBOOK=y
+CONFIG_MACH_OMAP_3430SDP=y
+CONFIG_MACH_NOKIA_N8X0=y
+CONFIG_MACH_NOKIA_RX51=y
+CONFIG_MACH_OMAP_ZOOM2=y
+CONFIG_MACH_OMAP_ZOOM3=y
+CONFIG_MACH_CM_T35=y
+CONFIG_MACH_IGEP0020=y
+CONFIG_MACH_SBC3530=y
+CONFIG_MACH_OMAP_3630SDP=y
+CONFIG_MACH_OMAP_4430SDP=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_ERRATA_411920=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+# CONFIG_LOCAL_TIMERS is not set
+CONFIG_AEABI=y
+CONFIG_LEDS=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
+CONFIG_KEXEC=y
+CONFIG_FPE_NWFPE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_OOPS=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_OMAP2=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_EEPROM_LEGACY=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_MD=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_KS8851=y
+CONFIG_KS8851_MLL=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_TWL4030=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_TWL4030=y
+CONFIG_W1=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MENELAUS=y
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_OMAP_LCD_VGA=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_DISPLAY_SUPPORT=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_DEBUG=y
+CONFIG_USB_WDM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_TEST=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_ZERO=m
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_OMAP=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TWL92330=y
+CONFIG_RTC_DRV_TWL4030=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_INOTIFY=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V2=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SECURITY=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
deleted file mode 100644
index aa24172a3e2c..000000000000
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ /dev/null
@@ -1,134 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-# CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3_BEAGLE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig
deleted file mode 100644
index 5db9a6be2054..000000000000
--- a/arch/arm/configs/omap3_defconfig
+++ /dev/null
@@ -1,292 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_ARCH_OMAP4=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_ARCH_OMAP2430=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_H4=y
-CONFIG_MACH_OMAP_APOLLON=y
-CONFIG_MACH_OMAP_2430SDP=y
-CONFIG_MACH_OMAP3_BEAGLE=y
-CONFIG_MACH_DEVKIT8000=y
-CONFIG_MACH_OMAP_LDP=y
-CONFIG_MACH_OVERO=y
-CONFIG_MACH_OMAP3EVM=y
-CONFIG_MACH_OMAP3517EVM=y
-CONFIG_MACH_OMAP3_PANDORA=y
-CONFIG_MACH_OMAP3_TOUCHBOOK=y
-CONFIG_MACH_OMAP_3430SDP=y
-CONFIG_MACH_NOKIA_N8X0=y
-CONFIG_MACH_NOKIA_RX51=y
-CONFIG_MACH_OMAP_ZOOM2=y
-CONFIG_MACH_OMAP_ZOOM3=y
-CONFIG_MACH_CM_T35=y
-CONFIG_MACH_IGEP0020=y
-CONFIG_MACH_SBC3530=y
-CONFIG_MACH_OMAP_3630SDP=y
-CONFIG_MACH_OMAP_4430SDP=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200"
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=y
-CONFIG_BT_HCIBPA10X=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_OOPS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_EEPROM_LEGACY=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_MD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_USB=y
-CONFIG_LIBERTAS_SDIO=y
-CONFIG_LIBERTAS_DEBUG=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_TWL4030=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
-CONFIG_MENELAUS=y
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_REGULATOR_TPS65023=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP_LCD_VGA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_OMAP=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL92330=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_LOCK_STAT=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
deleted file mode 100644
index 3b072e8e71fb..000000000000
--- a/arch/arm/configs/omap3_evm_defconfig
+++ /dev/null
@@ -1,160 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3EVM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=4
-# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
-CONFIG_FB_OMAP2=y
-# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-CONFIG_PANEL_GENERIC=y
-CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
deleted file mode 100644
index d5a622689370..000000000000
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ /dev/null
@@ -1,158 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3_PANDORA=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_TPO_TD043MTEA1=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_PERIPHERAL=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CIFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/omap3_stalker_lks_defconfig b/arch/arm/configs/omap3_stalker_lks_defconfig
deleted file mode 100644
index 1d1ab0b0b71c..000000000000
--- a/arch/arm/configs/omap3_stalker_lks_defconfig
+++ /dev/null
@@ -1,150 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_SBC3530=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig
deleted file mode 100644
index e988eccc93a8..000000000000
--- a/arch/arm/configs/omap3_touchbook_defconfig
+++ /dev/null
@@ -1,621 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3_TOUCHBOOK=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_KEXEC=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_DIAG=m
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_IPV6_MROUTE=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_VS_IPV6=y
-CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-CONFIG_IP_SCTP=m
-CONFIG_TIPC=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_IND=y
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=y
-CONFIG_BT_HCIBTSDIO=y
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=y
-CONFIG_BT_HCIBPA10X=y
-CONFIG_BT_HCIBFUSB=y
-CONFIG_AF_RXRPC=m
-CONFIG_CFG80211=m
-CONFIG_LIB80211=y
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_WIMAX=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_93CX6=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ISCSI_TCP=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_ATM_DRIVERS is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_BATTERY_BQ27x00=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-# CONFIG_SND_ARM is not set
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OXU210HP_HCD=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IUU=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_DEBUG=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_SISUSBVGA_CON=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ZERO_HNPTEST=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_MIDI_GADGET=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_GPIO_VBUS=y
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_UIO=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_JFFS2_CMODE_FAVOURLZO=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_SQUASHFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_CIFS_EXPERIMENTAL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_EFI_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
deleted file mode 100644
index 0cf4147a9366..000000000000
--- a/arch/arm/configs/omap_2430sdp_defconfig
+++ /dev/null
@@ -1,136 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-# CONFIG_OMAP_MUX_WARNINGS is not set
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP2430=y
-CONFIG_MACH_OMAP_2430SDP=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=m
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=m
-CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
deleted file mode 100644
index 5dbe595999be..000000000000
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ /dev/null
@@ -1,178 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_3430SDP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_GENERIC=y
-CONFIG_PANEL_SHARP_LS037V7DW01=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig
deleted file mode 100644
index 8e8f4e94609c..000000000000
--- a/arch/arm/configs/omap_3630sdp_defconfig
+++ /dev/null
@@ -1,154 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_3630SDP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
deleted file mode 100644
index 63e0c2d50f32..000000000000
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ /dev/null
@@ -1,122 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_ELF_CORE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP4=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_MACH_OMAP_4430SDP=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-# CONFIG_LOCAL_TIMERS is not set
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS2,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_KS8851=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
deleted file mode 100644
index 0b24858f5d46..000000000000
--- a/arch/arm/configs/omap_apollon_2420_defconfig
+++ /dev/null
@@ -1,92 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_MACH_OMAP_APOLLON=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_HID is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig
deleted file mode 100644
index ac08e51180dd..000000000000
--- a/arch/arm/configs/omap_generic_2420_defconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x10C08000
-CONFIG_ZBOOT_ROM_BSS=0x10200000
-CONFIG_FPE_NWFPE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_INOTIFY=y
-CONFIG_ROMFS_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
deleted file mode 100644
index 858f93aac2b2..000000000000
--- a/arch/arm/configs/omap_h4_2420_defconfig
+++ /dev/null
@@ -1,107 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_MACH_OMAP_H4=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=y
-CONFIG_IRCOMM=y
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_OMAP=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_MENELAUS=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
deleted file mode 100644
index c7bb558316d5..000000000000
--- a/arch/arm/configs/omap_ldp_defconfig
+++ /dev/null
@@ -1,135 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_LDP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP=y
-CONFIG_FB_OMAP_LCD_VGA=y
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
deleted file mode 100644
index 0a7ed449cded..000000000000
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ /dev/null
@@ -1,143 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_ZOOM2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
deleted file mode 100644
index f8085b0b9ecb..000000000000
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ /dev/null
@@ -1,155 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_ZOOM3=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
deleted file mode 100644
index 6fa1b14a7a9c..000000000000
--- a/arch/arm/configs/overo_defconfig
+++ /dev/null
@@ -1,275 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OVERO=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=y
-CONFIG_BT_HCIBPA10X=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_LEGACY=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_USB_ZD1201=m
-CONFIG_RTL8187=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_USB=y
-CONFIG_LIBERTAS_SDIO=y
-CONFIG_LIBERTAS_DEBUG=y
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/pcontrol_g20_defconfig b/arch/arm/configs/pcontrol_g20_defconfig
new file mode 100644
index 000000000000..b42ee62c4d77
--- /dev/null
+++ b/arch/arm/configs/pcontrol_g20_defconfig
@@ -0,0 +1,175 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_CROSS_COMPILE="/opt/arm-2010q1/bin/arm-none-linux-gnueabi-"
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_TREE_PREEMPT_RCU=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9G20=y
+CONFIG_MACH_PCONTROL_G20=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 mem=128M mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) root=/dev/mmcblk0p1 rootwait rw"
+CONFIG_VFP=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_AT24=m
+CONFIG_SCSI=m
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MACVLAN=m
+CONFIG_TUN=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+CONFIG_SMSC911X=m
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_MPPE=m
+CONFIG_INPUT_POLLDEV=y
+CONFIG_INPUT_SPARSEKMAP=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_MATRIX=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+# CONFIG_SERIO is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_MAX3100=m
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_R3964=m
+CONFIG_I2C=m
+CONFIG_I2C_CHARDEV=m
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_GPIO=m
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_W1=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_W1_SLAVE_DS2431=m
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_MFD_SUPPORT is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=m
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_G_HID=m
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_AUXDISPLAY=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV=y
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+CONFIG_IIO=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index 9312ef9f9bf4..5ca7a61f7c01 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -39,6 +39,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_ARM_CHARLCD=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
@@ -52,10 +53,13 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_VERSATILE=y
+CONFIG_SPI=y
+CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
@@ -70,7 +74,13 @@ CONFIG_SND_ARMAACI=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
-CONFIG_INOTIFY=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PL031=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
@@ -80,6 +90,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index fb75192ee7e5..fcaa60328051 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -38,6 +38,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_ARM_CHARLCD=y
 CONFIG_NETDEVICES=y
 CONFIG_SMSC_PHY=y
 CONFIG_NET_ETHERNET=y
@@ -51,10 +52,13 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_VERSATILE=y
+CONFIG_SPI=y
+CONFIG_GPIOLIB=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
@@ -69,7 +73,13 @@ CONFIG_SND_ARMAACI=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
-CONFIG_INOTIFY=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PL031=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
@@ -79,6 +89,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
deleted file mode 100644
index ffaef43ec0bb..000000000000
--- a/arch/arm/configs/rx51_defconfig
+++ /dev/null
@@ -1,222 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_NOKIA_RX51=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_PHONET=y
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_CFG80211=y
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_OOPS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=m
-CONFIG_TWL4030_WATCHDOG=m
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_DPI is not set
-# CONFIG_OMAP2_DSS_VENC is not set
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_ACX565AKM=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_HID=m
-CONFIG_USB_HID=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG_BLACKLIST_HUB=y
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_NOKIA=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=m
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_OMAP_HS=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_TWL4030=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_TIMER_STATS=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_LOCK_STAT=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig
deleted file mode 100644
index 0b0266c6d326..000000000000
--- a/arch/arm/configs/s5p6440_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5P6440=y
-CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDK6440=y
-CONFIG_CPU_32v6K=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/s5p64x0_defconfig b/arch/arm/configs/s5p64x0_defconfig
new file mode 100644
index 000000000000..2993ecd35145
--- /dev/null
+++ b/arch/arm/configs/s5p64x0_defconfig
@@ -0,0 +1,66 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_S5P64X0=y
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_MACH_SMDK6440=y
+CONFIG_MACH_SMDK6450=y
+CONFIG_CPU_32v6K=y
+CONFIG_AEABI=y
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+CONFIG_FPE_NWFPE=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_DISPLAY_SUPPORT=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_INOTIFY=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_S3C_UART=1
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
deleted file mode 100644
index 22c2d147f793..000000000000
--- a/arch/arm/configs/s5pc110_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5PV210=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDKC110=y
-CONFIG_VMSPLIT_2G=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index 1753836d0055..0488a1eb4d7d 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -7,6 +7,11 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_S5PV210=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_DEV_FB=y
+CONFIG_S5PV210_SETUP_FB_24BPP=y
+CONFIG_MACH_AQUILA=y
+CONFIG_MACH_GONI=y
+CONFIG_MACH_SMDKC110=y
 CONFIG_MACH_SMDKV210=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 46e5e0747269..c1c252cdca60 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -28,26 +28,9 @@ CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
 # CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -58,7 +41,6 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
-CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_REGULATOR=y
@@ -66,24 +48,10 @@ CONFIG_FB=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_SOC=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
 CONFIG_MMC_ARMMMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
 CONFIG_RTC_DRV_COH901331=y
@@ -93,12 +61,11 @@ CONFIG_COH901318=y
 CONFIG_FUSE_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index 73237bd130a2..6550db3aa5c7 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -1,3 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
-unifdef-y += hwcap.h
+header-y += hwcap.h
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 6e8f05c8a1c8..062b58c029ab 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -154,16 +154,39 @@
 	.long	9999b,9001f;			\
 	.popsection
 
+#ifdef CONFIG_SMP
+#define ALT_SMP(instr...)					\
+9998:	instr
+#define ALT_UP(instr...)					\
+	.pushsection ".alt.smp.init", "a"			;\
+	.long	9998b						;\
+	instr							;\
+	.popsection
+#define ALT_UP_B(label)					\
+	.equ	up_b_offset, label - 9998b			;\
+	.pushsection ".alt.smp.init", "a"			;\
+	.long	9998b						;\
+	b	. + up_b_offset					;\
+	.popsection
+#else
+#define ALT_SMP(instr...)
+#define ALT_UP(instr...) instr
+#define ALT_UP_B(label) b label
+#endif
+
 /*
  * SMP data memory barrier
  */
 	.macro	smp_dmb
 #ifdef CONFIG_SMP
 #if __LINUX_ARM_ARCH__ >= 7
-	dmb
+	ALT_SMP(dmb)
 #elif __LINUX_ARM_ARCH__ == 6
-	mcr	p15, 0, r0, c7, c10, 5	@ dmb
+	ALT_SMP(mcr	p15, 0, r0, c7, c10, 5)	@ dmb
+#else
+#error Incompatible SMP platform
 #endif
+	ALT_UP(nop)
 #endif
 	.endm
 
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index 66c160b8547f..9d6122096fbe 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -14,7 +14,7 @@
  * cache before the transfer is done, causing old data to be seen by
  * the CPU.
  */
-#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
 
 /*
  * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 4656a24058d2..3acd8fa25e34 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -137,10 +137,10 @@
 #endif
 
 /*
- * This flag is used to indicate that the page pointed to by a pte
- * is dirty and requires cleaning before returning it to the user.
+ * This flag is used to indicate that the page pointed to by a pte is clean
+ * and does not require cleaning before returning it to the user.
  */
-#define PG_dcache_dirty PG_arch_1
+#define PG_dcache_clean PG_arch_1
 
 /*
  *	MM Cache Management
@@ -156,6 +156,12 @@
  *	Please note that the implementation of these, and the required
  *	effects are cache-type (VIVT/VIPT/PIPT) specific.
  *
+ *	flush_icache_all()
+ *
+ *		Unconditionally clean and invalidate the entire icache.
+ *		Currently only needed for cache-v6.S and cache-v7.S, see
+ *		__flush_icache_all for the generic implementation.
+ *
  *	flush_kern_all()
  *
  *		Unconditionally clean and invalidate the entire cache.
@@ -206,6 +212,7 @@
  */
 
 struct cpu_cache_fns {
+	void (*flush_icache_all)(void);
 	void (*flush_kern_all)(void);
 	void (*flush_user_all)(void);
 	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
@@ -227,6 +234,7 @@ struct cpu_cache_fns {
 
 extern struct cpu_cache_fns cpu_cache;
 
+#define __cpuc_flush_icache_all		cpu_cache.flush_icache_all
 #define __cpuc_flush_kern_all		cpu_cache.flush_kern_all
 #define __cpuc_flush_user_all		cpu_cache.flush_user_all
 #define __cpuc_flush_user_range		cpu_cache.flush_user_range
@@ -246,6 +254,7 @@ extern struct cpu_cache_fns cpu_cache;
 
 #else
 
+#define __cpuc_flush_icache_all		__glue(_CACHE,_flush_icache_all)
 #define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
 #define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
 #define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
@@ -253,6 +262,7 @@ extern struct cpu_cache_fns cpu_cache;
 #define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
 #define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
 
+extern void __cpuc_flush_icache_all(void);
 extern void __cpuc_flush_kern_all(void);
 extern void __cpuc_flush_user_all(void);
 extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
@@ -291,6 +301,37 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
 /*
  * Convert calls to our calling convention.
  */
+
+/* Invalidate I-cache */
+#define __flush_icache_all_generic()					\
+	asm("mcr	p15, 0, %0, c7, c5, 0"				\
+	    : : "r" (0));
+
+/* Invalidate I-cache inner shareable */
+#define __flush_icache_all_v7_smp()					\
+	asm("mcr	p15, 0, %0, c7, c1, 0"				\
+	    : : "r" (0));
+
+/*
+ * Optimized __flush_icache_all for the common cases. Note that UP ARMv7
+ * will fall through to use __flush_icache_all_generic.
+ */
+#if (defined(CONFIG_CPU_V7) && defined(CONFIG_CPU_V6)) ||		\
+	defined(CONFIG_SMP_ON_UP)
+#define __flush_icache_preferred	__cpuc_flush_icache_all
+#elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
+#define __flush_icache_preferred	__flush_icache_all_v7_smp
+#elif __LINUX_ARM_ARCH__ == 6 && defined(CONFIG_ARM_ERRATA_411920)
+#define __flush_icache_preferred	__cpuc_flush_icache_all
+#else
+#define __flush_icache_preferred	__flush_icache_all_generic
+#endif
+
+static inline void __flush_icache_all(void)
+{
+	__flush_icache_preferred();
+}
+
 #define flush_cache_all()		__cpuc_flush_kern_all()
 
 static inline void vivt_flush_cache_mm(struct mm_struct *mm)
@@ -366,21 +407,6 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *);
 
-static inline void __flush_icache_all(void)
-{
-#ifdef CONFIG_ARM_ERRATA_411920
-	extern void v6_icache_inval_all(void);
-	v6_icache_inval_all();
-#elif defined(CONFIG_SMP) && __LINUX_ARM_ARCH__ >= 7
-	asm("mcr	p15, 0, %0, c7, c1, 0	@ invalidate I-cache inner shareable\n"
-	    :
-	    : "r" (0));
-#else
-	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
-	    :
-	    : "r" (0));
-#endif
-}
 static inline void flush_kernel_vmap_range(void *addr, int size)
 {
 	if ((cache_is_vivt() || cache_is_vipt_aliasing()))
@@ -405,9 +431,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
 static inline void flush_kernel_dcache_page(struct page *page)
 {
-	/* highmem pages are always flushed upon kunmap already */
-	if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page))
-		__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
 }
 
 #define flush_dcache_mmap_lock(mapping) \
diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h
index d3a4c2cb9f2f..c023db09fcc1 100644
--- a/arch/arm/include/asm/cachetype.h
+++ b/arch/arm/include/asm/cachetype.h
@@ -6,6 +6,7 @@
 #define CACHEID_VIPT_ALIASING		(1 << 2)
 #define CACHEID_VIPT			(CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING)
 #define CACHEID_ASID_TAGGED		(1 << 3)
+#define CACHEID_VIPT_I_ALIASING		(1 << 4)
 
 extern unsigned int cacheid;
 
@@ -14,15 +15,18 @@ extern unsigned int cacheid;
 #define cache_is_vipt_nonaliasing()	cacheid_is(CACHEID_VIPT_NONALIASING)
 #define cache_is_vipt_aliasing()	cacheid_is(CACHEID_VIPT_ALIASING)
 #define icache_is_vivt_asid_tagged()	cacheid_is(CACHEID_ASID_TAGGED)
+#define icache_is_vipt_aliasing()	cacheid_is(CACHEID_VIPT_I_ALIASING)
 
 /*
  * __LINUX_ARM_ARCH__ is the minimum supported CPU architecture
  * Mask out support which will never be present on newer CPUs.
  * - v6+ is never VIVT
- * - v7+ VIPT never aliases
+ * - v7+ VIPT never aliases on D-side
  */
 #if __LINUX_ARM_ARCH__ >= 7
-#define __CACHEID_ARCH_MIN	(CACHEID_VIPT_NONALIASING | CACHEID_ASID_TAGGED)
+#define __CACHEID_ARCH_MIN	(CACHEID_VIPT_NONALIASING |\
+				 CACHEID_ASID_TAGGED |\
+				 CACHEID_VIPT_I_ALIASING)
 #elif __LINUX_ARM_ARCH__ >= 6
 #define	__CACHEID_ARCH_MIN	(~CACHEID_VIVT)
 #else
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 69ce0727edb5..c568da7dcae4 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -144,16 +144,6 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 	return 0;
 }
 
-static inline int dma_get_cache_alignment(void)
-{
-	return 32;
-}
-
-static inline int dma_is_consistent(struct device *dev, dma_addr_t handle)
-{
-	return !!arch_is_coherent();
-}
-
 /*
  * DMA errors are defined by all-bits-set in the DMA address.
  */
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 51662feb9f1d..8bb66bca2e3e 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -59,6 +59,8 @@ typedef struct user_fp elf_fpregset_t;
 
 #define R_ARM_THM_CALL		10
 #define R_ARM_THM_JUMP24	30
+#define R_ARM_THM_MOVW_ABS_NC	47
+#define R_ARM_THM_MOVT_ABS	48
 
 /*
  * These are used to set parameters in the core dumps.
@@ -121,4 +123,12 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
 extern void elf_set_personality(const struct elf32_hdr *);
 #define SET_PERSONALITY(ex)	elf_set_personality(&(ex))
 
+struct mm_struct;
+extern unsigned long arch_randomize_brk(struct mm_struct *mm);
+#define arch_randomize_brk arch_randomize_brk
+
+extern int vectors_user_mapping(void);
+#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping()
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+
 #endif
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 103f7ee97313..f89515adac60 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -2,12 +2,30 @@
 #define _ASM_ARM_FTRACE
 
 #ifdef CONFIG_FUNCTION_TRACER
-#define MCOUNT_ADDR		((long)(mcount))
+#define MCOUNT_ADDR		((unsigned long)(__gnu_mcount_nc))
 #define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
 
 #ifndef __ASSEMBLY__
 extern void mcount(void);
 extern void __gnu_mcount_nc(void);
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+struct dyn_arch_ftrace {
+#ifdef CONFIG_OLD_MCOUNT
+	bool	old_mcount;
+#endif
+};
+
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	/* With Thumb-2, the recorded addresses have the lsb set */
+	return addr & ~1;
+}
+
+extern void ftrace_caller_old(void);
+extern void ftrace_call_old(void);
+#endif
+
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 6bcba48800fe..cc42d5fdee17 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -21,9 +21,6 @@
 #define __ASM_ARM_HARDWARE_L2X0_H
 
 #define L2X0_CACHE_ID			0x000
-#define   L2X0_CACHE_ID_PART_MASK	(0xf << 6)
-#define   L2X0_CACHE_ID_PART_L210	(1 << 6)
-#define   L2X0_CACHE_ID_PART_L310	(3 << 6)
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
@@ -53,6 +50,16 @@
 #define L2X0_LINE_DATA			0xF10
 #define L2X0_LINE_TAG			0xF30
 #define L2X0_DEBUG_CTRL			0xF40
+#define L2X0_PREFETCH_CTRL		0xF60
+#define L2X0_POWER_CTRL			0xF80
+#define   L2X0_DYNAMIC_CLK_GATING_EN	(1 << 1)
+#define   L2X0_STNDBY_MODE_EN		(1 << 0)
+
+/* Registers shifts and masks */
+#define L2X0_CACHE_ID_PART_MASK		(0xf << 6)
+#define L2X0_CACHE_ID_PART_L210		(1 << 6)
+#define L2X0_CACHE_ID_PART_L310		(3 << 6)
+#define L2X0_AUX_CTRL_WAY_SIZE_MASK	(0x3 << 17)
 
 #ifndef __ASSEMBLY__
 extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h
index f82b25d4f73e..7ecd793b8f5a 100644
--- a/arch/arm/include/asm/hardware/coresight.h
+++ b/arch/arm/include/asm/hardware/coresight.h
@@ -21,18 +21,6 @@
 #define TRACER_RUNNING		BIT(TRACER_RUNNING_BIT)
 #define TRACER_CYCLE_ACC	BIT(TRACER_CYCLE_ACC_BIT)
 
-struct tracectx {
-	unsigned int	etb_bufsz;
-	void __iomem	*etb_regs;
-	void __iomem	*etm_regs;
-	unsigned long	flags;
-	int		ncmppairs;
-	int		etm_portsz;
-	struct device	*dev;
-	struct clk	*emu_clk;
-	struct mutex	mutex;
-};
-
 #define TRACER_TIMEOUT 10000
 
 #define etm_writel(t, v, x) \
@@ -48,8 +36,6 @@ struct tracectx {
 /* CoreSight Component Registers */
 #define CSCR_CLASS	0xff4
 
-#define CSCR_PRSR	0x314
-
 #define UNLOCK_MAGIC	0xc5acce55
 
 /* ETM control register, "ETM Architecture", 3.3.1 */
@@ -114,10 +100,10 @@ struct tracectx {
 
 /* ETM status register, "ETM Architecture", 3.3.2 */
 #define ETMR_STATUS		(0x10)
-#define ETMST_OVERFLOW		(1 << 0)
-#define ETMST_PROGBIT		(1 << 1)
-#define ETMST_STARTSTOP		(1 << 2)
-#define ETMST_TRIGGER		(1 << 3)
+#define ETMST_OVERFLOW		BIT(0)
+#define ETMST_PROGBIT		BIT(1)
+#define ETMST_STARTSTOP		BIT(2)
+#define ETMST_TRIGGER		BIT(3)
 
 #define etm_progbit(t)		(etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT)
 #define etm_started(t)		(etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP)
@@ -125,13 +111,19 @@ struct tracectx {
 
 #define ETMR_TRACEENCTRL2	0x1c
 #define ETMR_TRACEENCTRL	0x24
-#define ETMTE_INCLEXCL		(1 << 24)
+#define ETMTE_INCLEXCL		BIT(24)
 #define ETMR_TRACEENEVT		0x20
 #define ETMCTRL_OPTS		(ETMCTRL_DO_CPRT | \
 				ETMCTRL_DATA_DO_ADDR | \
 				ETMCTRL_BRANCH_OUTPUT | \
 				ETMCTRL_DO_CONTEXTID)
 
+/* ETM management registers, "ETM Architecture", 3.5.24 */
+#define ETMMR_OSLAR	0x300
+#define ETMMR_OSLSR	0x304
+#define ETMMR_OSSRR	0x308
+#define ETMMR_PDSR	0x314
+
 /* ETB registers, "CoreSight Components TRM", 9.3 */
 #define ETBR_DEPTH		0x04
 #define ETBR_STATUS		0x0c
@@ -142,12 +134,12 @@ struct tracectx {
 #define ETBR_CTRL		0x20
 #define ETBR_FORMATTERCTRL	0x304
 #define ETBFF_ENFTC		1
-#define ETBFF_ENFCONT		(1 << 1)
-#define ETBFF_FONFLIN		(1 << 4)
-#define ETBFF_MANUAL_FLUSH	(1 << 6)
-#define ETBFF_TRIGIN		(1 << 8)
-#define ETBFF_TRIGEVT		(1 << 9)
-#define ETBFF_TRIGFL		(1 << 10)
+#define ETBFF_ENFCONT		BIT(1)
+#define ETBFF_FONFLIN		BIT(4)
+#define ETBFF_MANUAL_FLUSH	BIT(6)
+#define ETBFF_TRIGIN		BIT(8)
+#define ETBFF_TRIGEVT		BIT(9)
+#define ETBFF_TRIGFL		BIT(10)
 
 #define etb_writel(t, v, x) \
 	(__raw_writel((v), (t)->etb_regs + (x)))
diff --git a/arch/arm/include/asm/hardware/icst.h b/arch/arm/include/asm/hardware/icst.h
index 10382a3dcec9..794220b087d2 100644
--- a/arch/arm/include/asm/hardware/icst.h
+++ b/arch/arm/include/asm/hardware/icst.h
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  *
  *  Support functions for calculating clocks/divisors for the ICST
- *  clock generators.  See http://www.icst.com/ for more information
+ *  clock generators.  See http://www.idt.com/ for more information
  *  on these devices.
  */
 #ifndef ASMARM_HARDWARE_ICST_H
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
index 6a6c66be7f65..f35b86e68dd5 100644
--- a/arch/arm/include/asm/hardware/pl080.h
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -43,7 +43,7 @@
 
 /* Per channel configuration registers */
 
-#define PL008_Cx_STRIDE				(0x20)
+#define PL080_Cx_STRIDE				(0x20)
 #define PL080_Cx_BASE(x)			((0x100 + (x * 0x20)))
 #define PL080_Cx_SRC_ADDR(x)			((0x100 + (x * 0x20)))
 #define PL080_Cx_DST_ADDR(x)			((0x104 + (x * 0x20)))
@@ -68,6 +68,8 @@
 #define PL080_CONTROL_TC_IRQ_EN			(1 << 31)
 #define PL080_CONTROL_PROT_MASK			(0x7 << 28)
 #define PL080_CONTROL_PROT_SHIFT		(28)
+#define PL080_CONTROL_PROT_CACHE		(1 << 30)
+#define PL080_CONTROL_PROT_BUFF			(1 << 29)
 #define PL080_CONTROL_PROT_SYS			(1 << 28)
 #define PL080_CONTROL_DST_INCR			(1 << 27)
 #define PL080_CONTROL_SRC_INCR			(1 << 26)
diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h
index 46492a63a7c4..ebb3ceaa8fac 100644
--- a/arch/arm/include/asm/hardware/scoop.h
+++ b/arch/arm/include/asm/hardware/scoop.h
@@ -22,18 +22,23 @@
 #define SCOOP_GPWR 0x24
 #define SCOOP_GPRR 0x28
 
-#define SCOOP_GPCR_PA22	( 1 << 12 )
-#define SCOOP_GPCR_PA21	( 1 << 11 )
-#define SCOOP_GPCR_PA20	( 1 << 10 )
-#define SCOOP_GPCR_PA19	( 1 << 9 )
-#define SCOOP_GPCR_PA18	( 1 << 8 )
-#define SCOOP_GPCR_PA17	( 1 << 7 )
-#define SCOOP_GPCR_PA16	( 1 << 6 )
-#define SCOOP_GPCR_PA15	( 1 << 5 )
-#define SCOOP_GPCR_PA14	( 1 << 4 )
-#define SCOOP_GPCR_PA13	( 1 << 3 )
-#define SCOOP_GPCR_PA12	( 1 << 2 )
-#define SCOOP_GPCR_PA11	( 1 << 1 )
+#define SCOOP_CPR_OUT	(1 << 7)
+#define SCOOP_CPR_SD_3V	(1 << 2)
+#define SCOOP_CPR_CF_XV	(1 << 1)
+#define SCOOP_CPR_CF_3V	(1 << 0)
+
+#define SCOOP_GPCR_PA22	(1 << 12)
+#define SCOOP_GPCR_PA21	(1 << 11)
+#define SCOOP_GPCR_PA20	(1 << 10)
+#define SCOOP_GPCR_PA19	(1 << 9)
+#define SCOOP_GPCR_PA18	(1 << 8)
+#define SCOOP_GPCR_PA17	(1 << 7)
+#define SCOOP_GPCR_PA16	(1 << 6)
+#define SCOOP_GPCR_PA15	(1 << 5)
+#define SCOOP_GPCR_PA14	(1 << 4)
+#define SCOOP_GPCR_PA13	(1 << 3)
+#define SCOOP_GPCR_PA12	(1 << 2)
+#define SCOOP_GPCR_PA11	(1 << 1)
 
 struct scoop_config {
 	unsigned short io_out;
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index feb988a7ec37..1fc684e70ab6 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -35,9 +35,9 @@ extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte);
 #ifdef CONFIG_HIGHMEM
 extern void *kmap(struct page *page);
 extern void kunmap(struct page *page);
-extern void *kmap_atomic(struct page *page, enum km_type type);
-extern void kunmap_atomic(void *kvaddr, enum km_type type);
-extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+extern void *__kmap_atomic(struct page *page);
+extern void __kunmap_atomic(void *kvaddr);
+extern void *kmap_atomic_pfn(unsigned long pfn);
 extern struct page *kmap_atomic_to_page(const void *ptr);
 #endif
 
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
new file mode 100644
index 000000000000..4d8ae9d67abe
--- /dev/null
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -0,0 +1,133 @@
+#ifndef _ARM_HW_BREAKPOINT_H
+#define _ARM_HW_BREAKPOINT_H
+
+#ifdef __KERNEL__
+
+struct task_struct;
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+
+struct arch_hw_breakpoint_ctrl {
+		u32 __reserved	: 9,
+		mismatch	: 1,
+				: 9,
+		len		: 8,
+		type		: 2,
+		privilege	: 2,
+		enabled		: 1;
+};
+
+struct arch_hw_breakpoint {
+	u32	address;
+	u32	trigger;
+	struct perf_event *suspended_wp;
+	struct arch_hw_breakpoint_ctrl ctrl;
+};
+
+static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl)
+{
+	return (ctrl.mismatch << 22) | (ctrl.len << 5) | (ctrl.type << 3) |
+		(ctrl.privilege << 1) | ctrl.enabled;
+}
+
+static inline void decode_ctrl_reg(u32 reg,
+				   struct arch_hw_breakpoint_ctrl *ctrl)
+{
+	ctrl->enabled	= reg & 0x1;
+	reg >>= 1;
+	ctrl->privilege	= reg & 0x3;
+	reg >>= 2;
+	ctrl->type	= reg & 0x3;
+	reg >>= 2;
+	ctrl->len	= reg & 0xff;
+	reg >>= 17;
+	ctrl->mismatch	= reg & 0x1;
+}
+
+/* Debug architecture numbers. */
+#define ARM_DEBUG_ARCH_RESERVED	0	/* In case of ptrace ABI updates. */
+#define ARM_DEBUG_ARCH_V6	1
+#define ARM_DEBUG_ARCH_V6_1	2
+#define ARM_DEBUG_ARCH_V7_ECP14	3
+#define ARM_DEBUG_ARCH_V7_MM	4
+
+/* Breakpoint */
+#define ARM_BREAKPOINT_EXECUTE	0
+
+/* Watchpoints */
+#define ARM_BREAKPOINT_LOAD	1
+#define ARM_BREAKPOINT_STORE	2
+
+/* Privilege Levels */
+#define ARM_BREAKPOINT_PRIV	1
+#define ARM_BREAKPOINT_USER	2
+
+/* Lengths */
+#define ARM_BREAKPOINT_LEN_1	0x1
+#define ARM_BREAKPOINT_LEN_2	0x3
+#define ARM_BREAKPOINT_LEN_4	0xf
+#define ARM_BREAKPOINT_LEN_8	0xff
+
+/* Limits */
+#define ARM_MAX_BRP		16
+#define ARM_MAX_WRP		16
+#define ARM_MAX_HBP_SLOTS	(ARM_MAX_BRP + ARM_MAX_WRP)
+
+/* DSCR method of entry bits. */
+#define ARM_DSCR_MOE(x)			((x >> 2) & 0xf)
+#define ARM_ENTRY_BREAKPOINT		0x1
+#define ARM_ENTRY_ASYNC_WATCHPOINT	0x2
+#define ARM_ENTRY_SYNC_WATCHPOINT	0xa
+
+/* DSCR monitor/halting bits. */
+#define ARM_DSCR_HDBGEN		(1 << 14)
+#define ARM_DSCR_MDBGEN		(1 << 15)
+
+/* opcode2 numbers for the co-processor instructions. */
+#define ARM_OP2_BVR		4
+#define ARM_OP2_BCR		5
+#define ARM_OP2_WVR		6
+#define ARM_OP2_WCR		7
+
+/* Base register numbers for the debug registers. */
+#define ARM_BASE_BVR		64
+#define ARM_BASE_BCR		80
+#define ARM_BASE_WVR		96
+#define ARM_BASE_WCR		112
+
+/* Accessor macros for the debug registers. */
+#define ARM_DBG_READ(M, OP2, VAL) do {\
+	asm volatile("mrc p14, 0, %0, c0," #M ", " #OP2 : "=r" (VAL));\
+} while (0)
+
+#define ARM_DBG_WRITE(M, OP2, VAL) do {\
+	asm volatile("mcr p14, 0, %0, c0," #M ", " #OP2 : : "r" (VAL));\
+} while (0)
+
+struct notifier_block;
+struct perf_event;
+struct pmu;
+
+extern struct pmu perf_ops_bp;
+extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
+				  int *gen_len, int *gen_type);
+extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+					   unsigned long val, void *data);
+
+extern u8 arch_get_debug_arch(void);
+extern u8 arch_get_max_wp_len(void);
+extern void clear_ptrace_hw_breakpoint(struct task_struct *tsk);
+
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+int hw_breakpoint_slots(int type);
+
+#else
+static inline void clear_ptrace_hw_breakpoint(struct task_struct *tsk) {}
+
+#endif	/* CONFIG_HAVE_HW_BREAKPOINT */
+#endif	/* __KERNEL__ */
+#endif	/* _ARM_HW_BREAKPOINT_H */
diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h
index 90831f6f5f5c..5586b7c8ef6f 100644
--- a/arch/arm/include/asm/hw_irq.h
+++ b/arch/arm/include/asm/hw_irq.h
@@ -24,4 +24,6 @@ void set_irq_flags(unsigned int irq, unsigned int flags);
 #define IRQF_PROBE	(1 << 1)
 #define IRQF_NOAUTOEN	(1 << 2)
 
+#define ARCH_IRQ_INIT_FLAGS	(IRQ_NOREQUEST | IRQ_NOPROBE)
+
 #endif
diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
index f7bd52b1c365..c1062c317103 100644
--- a/arch/arm/include/asm/hwcap.h
+++ b/arch/arm/include/asm/hwcap.h
@@ -19,6 +19,7 @@
 #define HWCAP_NEON	4096
 #define HWCAP_VFPv3	8192
 #define HWCAP_VFPv3D16	16384
+#define HWCAP_TLS	32768
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 /*
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 1261b1f928d9..815efa2d4e07 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -294,6 +294,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
 extern int valid_phys_addr_range(unsigned long addr, size_t size);
 extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+extern int devmem_is_allowed(unsigned long pfn);
 #endif
 
 /*
diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h
index 7f0b6d13296a..9c9629816128 100644
--- a/arch/arm/include/asm/ioctls.h
+++ b/arch/arm/include/asm/ioctls.h
@@ -1,87 +1,8 @@
 #ifndef __ASM_ARM_IOCTLS_H
 #define __ASM_ARM_IOCTLS_H
 
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define TIOCGRS485      0x542E
-#define TIOCSRS485      0x542F
-
-#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
 #define FIOQSIZE	0x545E
 
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
 
 #endif
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 237282f7c762..2721a5814cb9 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -7,6 +7,8 @@
 #define irq_canonicalize(i)	(i)
 #endif
 
+#define NR_IRQS_LEGACY	16
+
 /*
  * Use this value to indicate lack of interrupt
  * capability
diff --git a/arch/arm/include/asm/irqflags.h b/arch/arm/include/asm/irqflags.h
index 6d09974e6646..1e6cca55c750 100644
--- a/arch/arm/include/asm/irqflags.h
+++ b/arch/arm/include/asm/irqflags.h
@@ -10,66 +10,85 @@
  */
 #if __LINUX_ARM_ARCH__ >= 6
 
-#define raw_local_irq_save(x)					\
-	({							\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ local_irq_save\n"	\
-	"cpsid	i"						\
-	: "=r" (x) : : "memory", "cc");				\
-	})
+static inline unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags;
+
+	asm volatile(
+		"	mrs	%0, cpsr	@ arch_local_irq_save\n"
+		"	cpsid	i"
+		: "=r" (flags) : : "memory", "cc");
+	return flags;
+}
+
+static inline void arch_local_irq_enable(void)
+{
+	asm volatile(
+		"	cpsie i			@ arch_local_irq_enable"
+		:
+		:
+		: "memory", "cc");
+}
+
+static inline void arch_local_irq_disable(void)
+{
+	asm volatile(
+		"	cpsid i			@ arch_local_irq_disable"
+		:
+		:
+		: "memory", "cc");
+}
 
-#define raw_local_irq_enable()  __asm__("cpsie i	@ __sti" : : : "memory", "cc")
-#define raw_local_irq_disable() __asm__("cpsid i	@ __cli" : : : "memory", "cc")
 #define local_fiq_enable()  __asm__("cpsie f	@ __stf" : : : "memory", "cc")
 #define local_fiq_disable() __asm__("cpsid f	@ __clf" : : : "memory", "cc")
-
 #else
 
 /*
  * Save the current interrupt enable state & disable IRQs
  */
-#define raw_local_irq_save(x)					\
-	({							\
-		unsigned long temp;				\
-		(void) (&temp == &x);				\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ local_irq_save\n"	\
-"	orr	%1, %0, #128\n"					\
-"	msr	cpsr_c, %1"					\
-	: "=r" (x), "=r" (temp)					\
-	:							\
-	: "memory", "cc");					\
-	})
-	
+static inline unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags, temp;
+
+	asm volatile(
+		"	mrs	%0, cpsr	@ arch_local_irq_save\n"
+		"	orr	%1, %0, #128\n"
+		"	msr	cpsr_c, %1"
+		: "=r" (flags), "=r" (temp)
+		:
+		: "memory", "cc");
+	return flags;
+}
+
 /*
  * Enable IRQs
  */
-#define raw_local_irq_enable()					\
-	({							\
-		unsigned long temp;				\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ local_irq_enable\n"	\
-"	bic	%0, %0, #128\n"					\
-"	msr	cpsr_c, %0"					\
-	: "=r" (temp)						\
-	:							\
-	: "memory", "cc");					\
-	})
+static inline void arch_local_irq_enable(void)
+{
+	unsigned long temp;
+	asm volatile(
+		"	mrs	%0, cpsr	@ arch_local_irq_enable\n"
+		"	bic	%0, %0, #128\n"
+		"	msr	cpsr_c, %0"
+		: "=r" (temp)
+		:
+		: "memory", "cc");
+}
 
 /*
  * Disable IRQs
  */
-#define raw_local_irq_disable()					\
-	({							\
-		unsigned long temp;				\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ local_irq_disable\n"	\
-"	orr	%0, %0, #128\n"					\
-"	msr	cpsr_c, %0"					\
-	: "=r" (temp)						\
-	:							\
-	: "memory", "cc");					\
-	})
+static inline void arch_local_irq_disable(void)
+{
+	unsigned long temp;
+	asm volatile(
+		"	mrs	%0, cpsr	@ arch_local_irq_disable\n"
+		"	orr	%0, %0, #128\n"
+		"	msr	cpsr_c, %0"
+		: "=r" (temp)
+		:
+		: "memory", "cc");
+}
 
 /*
  * Enable FIQs
@@ -106,27 +125,31 @@
 /*
  * Save the current interrupt enable state.
  */
-#define raw_local_save_flags(x)					\
-	({							\
-	__asm__ __volatile__(					\
-	"mrs	%0, cpsr		@ local_save_flags"	\
-	: "=r" (x) : : "memory", "cc");				\
-	})
+static inline unsigned long arch_local_save_flags(void)
+{
+	unsigned long flags;
+	asm volatile(
+		"	mrs	%0, cpsr	@ local_save_flags"
+		: "=r" (flags) : : "memory", "cc");
+	return flags;
+}
 
 /*
  * restore saved IRQ & FIQ state
  */
-#define raw_local_irq_restore(x)				\
-	__asm__ __volatile__(					\
-	"msr	cpsr_c, %0		@ local_irq_restore\n"	\
-	:							\
-	: "r" (x)						\
-	: "memory", "cc")
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+	asm volatile(
+		"	msr	cpsr_c, %0	@ local_irq_restore"
+		:
+		: "r" (flags)
+		: "memory", "cc");
+}
 
-#define raw_irqs_disabled_flags(flags)	\
-({					\
-	(int)((flags) & PSR_I_BIT);	\
-})
+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+	return flags & PSR_I_BIT;
+}
 
 #endif
 #endif
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
index df15a0dc228e..8ec9ef5c3c7b 100644
--- a/arch/arm/include/asm/kexec.h
+++ b/arch/arm/include/asm/kexec.h
@@ -19,10 +19,26 @@
 
 #ifndef __ASSEMBLY__
 
-struct kimage;
-/* Provide a dummy definition to avoid build failures. */
+/**
+ * crash_setup_regs() - save registers for the panic kernel
+ * @newregs: registers are saved here
+ * @oldregs: registers to be saved (may be %NULL)
+ *
+ * Function copies machine registers from @oldregs to @newregs. If @oldregs is
+ * %NULL then current registers are stored there.
+ */
 static inline void crash_setup_regs(struct pt_regs *newregs,
-                                        struct pt_regs *oldregs) { }
+				    struct pt_regs *oldregs)
+{
+	if (oldregs) {
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	} else {
+		__asm__ __volatile__ ("stmia %0, {r0 - r15}"
+				      : : "r" (&newregs->ARM_r0));
+		__asm__ __volatile__ ("mrs %0, cpsr"
+				      : "=r" (newregs->ARM_cpsr));
+	}
+}
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h
index 67af4b841984..48066ce9ea34 100644
--- a/arch/arm/include/asm/kgdb.h
+++ b/arch/arm/include/asm/kgdb.h
@@ -71,10 +71,11 @@ extern int kgdb_fault_expected;
 #define _FP_REGS		8
 #define _EXTRA_REGS		2
 #define GDB_MAX_REGS		(_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
+#define DBG_MAX_REG_NUM		(_GP_REGS + _FP_REGS + _EXTRA_REGS)
 
 #define KGDB_MAX_NO_CPUS	1
 #define BUFMAX			400
-#define NUMREGBYTES		(GDB_MAX_REGS << 2)
+#define NUMREGBYTES		(DBG_MAX_REG_NUM << 2)
 #define NUMCRITREGBYTES		(32 << 2)
 
 #define _R0			0
diff --git a/arch/arm/include/asm/local64.h b/arch/arm/include/asm/local64.h
new file mode 100644
index 000000000000..36c93b5cc239
--- /dev/null
+++ b/arch/arm/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index c59842dc7cb8..d97a964207fa 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -16,17 +16,15 @@ struct sys_timer;
 
 struct machine_desc {
 	/*
-	 * Note! The first four elements are used
+	 * Note! The first two elements are used
 	 * by assembler code in head.S, head-common.S
 	 */
 	unsigned int		nr;		/* architecture number	*/
-	unsigned int		phys_io;	/* start of physical io	*/
-	unsigned int		io_pg_offst;	/* byte offset for io 
-						 * page tabe entry	*/
-
 	const char		*name;		/* architecture name	*/
 	unsigned long		boot_params;	/* tagged list		*/
 
+	unsigned int		nr_irqs;	/* number of IRQs */
+
 	unsigned int		video_start;	/* start of video RAM	*/
 	unsigned int		video_end;	/* end of video RAM	*/
 
@@ -37,6 +35,7 @@ struct machine_desc {
 	void			(*fixup)(struct machine_desc *,
 					 struct tag *, char **,
 					 struct meminfo *);
+	void			(*reserve)(void);/* reserve mem blocks	*/
 	void			(*map_io)(void);/* IO mapping function	*/
 	void			(*init_irq)(void);
 	struct sys_timer	*timer;		/* system tick timer	*/
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index 8920b2d6e3b8..ce3eee9fe26c 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -17,6 +17,7 @@ struct seq_file;
 /*
  * This is internal.  Do not use it.
  */
+extern unsigned int arch_nr_irqs;
 extern void (*init_arch_irq)(void);
 extern void init_FIQ(void);
 extern int show_fiq_list(struct seq_file *, void *);
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 742c2aaeb020..d2fedb5aeb1f 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -27,6 +27,8 @@ struct map_desc {
 #define MT_MEMORY		9
 #define MT_ROM			10
 #define MT_MEMORY_NONCACHED	11
+#define MT_MEMORY_DTCM		12
+#define MT_MEMORY_ITCM		13
 
 #ifdef CONFIG_MMU
 extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 52f0da1e97df..16330bd0657c 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -46,6 +46,7 @@ struct pci_sys_data {
 					/* IRQ mapping				*/
 	int		(*map_irq)(struct pci_dev *, u8, u8);
 	struct hw_pci	*hw;
+	void		*private_data;	/* platform controller private data	*/
 };
 
 /*
diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h
new file mode 100644
index 000000000000..b8da2e415e4e
--- /dev/null
+++ b/arch/arm/include/asm/memblock.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_ARM_MEMBLOCK_H
+#define _ASM_ARM_MEMBLOCK_H
+
+struct meminfo;
+struct machine_desc;
+
+extern void arm_memblock_init(struct meminfo *, struct machine_desc *);
+
+#endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 4312ee5e3d0b..23c2e8e5c0fa 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -124,6 +124,15 @@
 #endif /* !CONFIG_MMU */
 
 /*
+ * We fix the TCM memories max 32 KiB ITCM resp DTCM at these
+ * locations
+ */
+#ifdef CONFIG_HAVE_TCM
+#define ITCM_OFFSET	UL(0xfffe0000)
+#define DTCM_OFFSET	UL(0xfffe8000)
+#endif
+
+/*
  * Physical vs virtual RAM address space conversion.  These are
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
@@ -158,7 +167,7 @@
 #endif
 
 #ifndef arch_adjust_zones
-#define arch_adjust_zones(node,size,holes) do { } while (0)
+#define arch_adjust_zones(size,holes) do { } while (0)
 #elif !defined(CONFIG_ZONE_DMA)
 #error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
 #endif
@@ -234,76 +243,11 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(k)	indicates whether a virtual address is valid
  */
-#ifndef CONFIG_DISCONTIGMEM
-
 #define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
 
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
 
-#define PHYS_TO_NID(addr)	(0)
-
-#else /* CONFIG_DISCONTIGMEM */
-
-/*
- * This is more complex.  We have a set of mem_map arrays spread
- * around in memory.
- */
-#include <linux/numa.h>
-
-#define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
-#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(kaddr)					\
-	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
-
-#define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
-
-/*
- * Common discontigmem stuff.
- *  PHYS_TO_NID is used by the ARM kernel/setup.c
- */
-#define PHYS_TO_NID(addr)	PFN_TO_NID((addr) >> PAGE_SHIFT)
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
-
-/*
- * Given a page frame number, find the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-#ifdef NODE_MEM_SIZE_BITS
-#define NODE_MEM_SIZE_MASK	((1 << NODE_MEM_SIZE_BITS) - 1)
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) \
-	(((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-#define PFN_TO_NID(pfn) \
-	(((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(addr) \
-	(((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)
-
-#endif /* NODE_MEM_SIZE_BITS */
-
-#endif /* !CONFIG_DISCONTIGMEM */
-
 /*
  * Optional coherency support.  Currently used only by selected
  * Intel XSC3-based systems.
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index a0b3cac0547c..71605d9f8e42 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -18,7 +18,6 @@
 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
 #include <asm/proc-fns.h>
-#include <asm-generic/mm_hooks.h>
 
 void __check_kvm_seq(struct mm_struct *mm);
 
@@ -134,4 +133,32 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 #define deactivate_mm(tsk,mm)	do { } while (0)
 #define activate_mm(prev,next)	switch_mm(prev, next, NULL)
 
+/*
+ * We are inserting a "fake" vma for the user-accessible vector page so
+ * gdb and friends can get to it through ptrace and /proc/<pid>/mem.
+ * But we also want to remove it before the generic code gets to see it
+ * during process exit or the unmapping of it would  cause total havoc.
+ * (the macro is used as remove_vma() is static to mm/mmap.c)
+ */
+#define arch_exit_mmap(mm) \
+do { \
+	struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \
+	if (high_vma) { \
+		BUG_ON(high_vma->vm_next);  /* it should be last */ \
+		if (high_vma->vm_prev) \
+			high_vma->vm_prev->vm_next = NULL; \
+		else \
+			mm->mmap = NULL; \
+		rb_erase(&high_vma->vm_rb, &mm->mm_rb); \
+		mm->mmap_cache = NULL; \
+		mm->map_count--; \
+		remove_vma(high_vma); \
+	} \
+} while (0)
+
+static inline void arch_dup_mmap(struct mm_struct *oldmm,
+				 struct mm_struct *mm)
+{
+}
+
 #endif
diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h
deleted file mode 100644
index ae63a4fd28c8..000000000000
--- a/arch/arm/include/asm/mmzone.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  arch/arm/include/asm/mmzone.h
- *
- *  1999-12-29	Nicolas Pitre		Created
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_MMZONE_H
-#define __ASM_MMZONE_H
-
-/*
- * Currently defined in arch/arm/mm/discontig.c
- */
-extern pg_data_t discontig_node_data[];
-
-/*
- * Return a pointer to the node data for node n.
- */
-#define NODE_DATA(nid)		(&discontig_node_data[nid])
-
-/*
- * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
- */
-#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
-
-#include <mach/memory.h>
-
-#endif
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index e4dfa69abb68..cbb0bc295d2b 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -7,20 +7,27 @@
 
 struct unwind_table;
 
-struct mod_arch_specific
-{
 #ifdef CONFIG_ARM_UNWIND
-	Elf_Shdr *unw_sec_init;
-	Elf_Shdr *unw_sec_devinit;
-	Elf_Shdr *unw_sec_core;
-	Elf_Shdr *sec_init_text;
-	Elf_Shdr *sec_devinit_text;
-	Elf_Shdr *sec_core_text;
-	struct unwind_table *unwind_init;
-	struct unwind_table *unwind_devinit;
-	struct unwind_table *unwind_core;
-#endif
+struct arm_unwind_mapping {
+	Elf_Shdr *unw_sec;
+	Elf_Shdr *sec_text;
+	struct unwind_table *unwind;
+};
+enum {
+	ARM_SEC_INIT,
+	ARM_SEC_DEVINIT,
+	ARM_SEC_CORE,
+	ARM_SEC_EXIT,
+	ARM_SEC_DEVEXIT,
+	ARM_SEC_MAX,
+};
+struct mod_arch_specific {
+	struct arm_unwind_mapping map[ARM_SEC_MAX];
 };
+#else
+struct mod_arch_specific {
+};
+#endif
 
 /*
  * Include the ARM architecture version.
diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
index 25f76bae57ab..fc1900925275 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -25,6 +25,9 @@ struct outer_cache_fns {
 	void (*inv_range)(unsigned long, unsigned long);
 	void (*clean_range)(unsigned long, unsigned long);
 	void (*flush_range)(unsigned long, unsigned long);
+	void (*flush_all)(void);
+	void (*inv_all)(void);
+	void (*disable)(void);
 #ifdef CONFIG_OUTER_CACHE_SYNC
 	void (*sync)(void);
 #endif
@@ -50,6 +53,24 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
 		outer_cache.flush_range(start, end);
 }
 
+static inline void outer_flush_all(void)
+{
+	if (outer_cache.flush_all)
+		outer_cache.flush_all();
+}
+
+static inline void outer_inv_all(void)
+{
+	if (outer_cache.inv_all)
+		outer_cache.inv_all();
+}
+
+static inline void outer_disable(void)
+{
+	if (outer_cache.disable)
+		outer_cache.disable();
+}
+
 #else
 
 static inline void outer_inv_range(unsigned long start, unsigned long end)
@@ -58,6 +79,9 @@ static inline void outer_clean_range(unsigned long start, unsigned long end)
 { }
 static inline void outer_flush_range(unsigned long start, unsigned long end)
 { }
+static inline void outer_flush_all(void) { }
+static inline void outer_inv_all(void) { }
+static inline void outer_disable(void) { }
 
 #endif
 
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index 48837e6d8887..c4aa4e8c6af9 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -12,18 +12,6 @@
 #ifndef __ARM_PERF_EVENT_H__
 #define __ARM_PERF_EVENT_H__
 
-/*
- * NOP: on *most* (read: all supported) ARM platforms, the performance
- * counter interrupts are regular interrupts and not an NMI. This
- * means that when we receive the interrupt we can call
- * perf_event_do_pending() that handles all of the work with
- * interrupts enabled.
- */
-static inline void
-set_perf_event_pending(void)
-{
-}
-
 /* ARM performance counters start from 1 (in the cp15 accesses) so use the
  * same indexes here for consistency. */
 #define PERF_EVENT_INDEX_OFFSET 1
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index ab68cf1ef80f..b155414192da 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -263,24 +263,37 @@ extern struct page *empty_zero_page;
 #define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
 #define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
 
-#define pte_offset_map(dir,addr)	(__pte_map(dir, KM_PTE0) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr)	(__pte_map(dir, KM_PTE1) + __pte_index(addr))
-#define pte_unmap(pte)			__pte_unmap(pte, KM_PTE0)
-#define pte_unmap_nested(pte)		__pte_unmap(pte, KM_PTE1)
+#define pte_offset_map(dir,addr)	(__pte_map(dir) + __pte_index(addr))
+#define pte_unmap(pte)			__pte_unmap(pte)
 
 #ifndef CONFIG_HIGHPTE
-#define __pte_map(dir,km)	pmd_page_vaddr(*(dir))
-#define __pte_unmap(pte,km)	do { } while (0)
+#define __pte_map(dir)		pmd_page_vaddr(*(dir))
+#define __pte_unmap(pte)	do { } while (0)
 #else
-#define __pte_map(dir,km)	((pte_t *)kmap_atomic(pmd_page(*(dir)), km) + PTRS_PER_PTE)
-#define __pte_unmap(pte,km)	kunmap_atomic((pte - PTRS_PER_PTE), km)
+#define __pte_map(dir)		((pte_t *)kmap_atomic(pmd_page(*(dir))) + PTRS_PER_PTE)
+#define __pte_unmap(pte)	kunmap_atomic((pte - PTRS_PER_PTE))
 #endif
 
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 
-#define set_pte_at(mm,addr,ptep,pteval) do { \
-	set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \
- } while (0)
+#if __LINUX_ARM_ARCH__ < 6
+static inline void __sync_icache_dcache(pte_t pteval)
+{
+}
+#else
+extern void __sync_icache_dcache(pte_t pteval);
+#endif
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pteval)
+{
+	if (addr >= TASK_SIZE)
+		set_pte_ext(ptep, pteval, 0);
+	else {
+		__sync_icache_dcache(pteval);
+		set_pte_ext(ptep, pteval, PTE_EXT_NG);
+	}
+}
 
 /*
  * The following only work if pte_present() is true.
@@ -290,8 +303,13 @@ extern struct page *empty_zero_page;
 #define pte_write(pte)		(pte_val(pte) & L_PTE_WRITE)
 #define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
 #define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
+#define pte_exec(pte)		(pte_val(pte) & L_PTE_EXEC)
 #define pte_special(pte)	(0)
 
+#define pte_present_user(pte) \
+	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
+	 (L_PTE_PRESENT | L_PTE_USER))
+
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
@@ -317,6 +335,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
 #else
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 7bed3daf83b8..67357baaeeeb 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -19,6 +19,7 @@
 
 #ifdef __KERNEL__
 
+#include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
 
@@ -41,6 +42,9 @@ struct debug_entry {
 struct debug_info {
 	int			nsaved;
 	struct debug_entry	bp[2];
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	struct perf_event	*hbp[ARM_MAX_HBP_SLOTS];
+#endif
 };
 
 struct thread_struct {
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 9dcb11e59026..783d50f32618 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -29,6 +29,8 @@
 #define PTRACE_SETCRUNCHREGS	26
 #define PTRACE_GETVFPREGS	27
 #define PTRACE_SETVFPREGS	28
+#define PTRACE_GETHBPREGS	29
+#define PTRACE_SETHBPREGS	30
 
 /*
  * PSR bits
@@ -158,15 +160,24 @@ struct pt_regs {
  */
 static inline int valid_user_regs(struct pt_regs *regs)
 {
-	if (user_mode(regs) && (regs->ARM_cpsr & PSR_I_BIT) == 0) {
-		regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT);
-		return 1;
+	unsigned long mode = regs->ARM_cpsr & MODE_MASK;
+
+	/*
+	 * Always clear the F (FIQ) and A (delayed abort) bits
+	 */
+	regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT);
+
+	if ((regs->ARM_cpsr & PSR_I_BIT) == 0) {
+		if (mode == USR_MODE)
+			return 1;
+		if (elf_hwcap & HWCAP_26BIT && mode == USR26_MODE)
+			return 1;
 	}
 
 	/*
 	 * Force CPSR to something logical...
 	 */
-	regs->ARM_cpsr &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | PSR_T_BIT | MODE32_BIT;
+	regs->ARM_cpsr &= PSR_f | PSR_s | PSR_x | PSR_T_BIT | MODE32_BIT;
 	if (!(elf_hwcap & HWCAP_26BIT))
 		regs->ARM_cpsr |= USR_MODE;
 
@@ -184,6 +195,42 @@ extern unsigned long profile_pc(struct pt_regs *regs);
 #define predicate(x)		((x) & 0xf0000000)
 #define PREDICATE_ALWAYS	0xe0000000
 
+/*
+ * kprobe-based event tracer support
+ */
+#include <linux/stddef.h>
+#include <linux/types.h>
+#define MAX_REG_OFFSET (offsetof(struct pt_regs, ARM_ORIG_r0))
+
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	   pt_regs from which register value is gotten
+ * @offset:    offset number of the register.
+ *
+ * regs_get_register returns the value of a register whose offset from @regs.
+ * The @offset is the offset of the register in struct pt_regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+/* Valid only for Kernel mode traps. */
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->ARM_sp;
+}
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/seccomp.h b/arch/arm/include/asm/seccomp.h
new file mode 100644
index 000000000000..52b156b341f5
--- /dev/null
+++ b/arch/arm/include/asm/seccomp.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_ARM_SECCOMP_H
+#define _ASM_ARM_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#endif /* _ASM_ARM_SECCOMP_H */
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index f392fb4437af..f1e5a9bca249 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -201,8 +201,7 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn }
 struct membank {
 	unsigned long start;
 	unsigned long size;
-	unsigned short node;
-	unsigned short highmem;
+	unsigned int highmem;
 };
 
 struct meminfo {
@@ -212,9 +211,8 @@ struct meminfo {
 
 extern struct meminfo meminfo;
 
-#define for_each_nodebank(iter,mi,no)			\
-	for (iter = 0; iter < (mi)->nr_banks; iter++)	\
-		if ((mi)->bank[iter].node == no)
+#define for_each_bank(iter,mi)				\
+	for (iter = 0; iter < (mi)->nr_banks; iter++)
 
 #define bank_pfn_start(bank)	__phys_to_pfn((bank)->start)
 #define bank_pfn_end(bank)	__phys_to_pfn((bank)->start + (bank)->size)
diff --git a/arch/arm/include/asm/smp_mpidr.h b/arch/arm/include/asm/smp_mpidr.h
new file mode 100644
index 000000000000..6a9307d64900
--- /dev/null
+++ b/arch/arm/include/asm/smp_mpidr.h
@@ -0,0 +1,17 @@
+#ifndef ASMARM_SMP_MIDR_H
+#define ASMARM_SMP_MIDR_H
+
+#define hard_smp_processor_id()						\
+	({								\
+		unsigned int cpunum;					\
+		__asm__("\n"						\
+			"1:	mrc p15, 0, %0, c0, c0, 5\n"		\
+			"	.pushsection \".alt.smp.init\", \"a\"\n"\
+			"	.long	1b\n"				\
+			"	mov	%0, #0\n"			\
+			"	.popsection"				\
+			: "=r" (cpunum));				\
+		cpunum &= 0x0F;						\
+	})
+
+#endif
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index e6215305544a..f24c1b9e211d 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -7,15 +7,40 @@
 
 #include <asm/cputype.h>
 
+/*
+ * Return true if we are running on a SMP platform
+ */
+static inline bool is_smp(void)
+{
+#ifndef CONFIG_SMP
+	return false;
+#elif defined(CONFIG_SMP_ON_UP)
+	extern unsigned int smp_on_up;
+	return !!smp_on_up;
+#else
+	return true;
+#endif
+}
+
 /* all SMP configurations have the extended CPUID registers */
 static inline int tlb_ops_need_broadcast(void)
 {
+	if (!is_smp())
+		return 0;
+
 	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
 }
 
+#if !defined(CONFIG_SMP) || __LINUX_ARM_ARCH__ >= 7
+#define cache_ops_need_broadcast()	0
+#else
 static inline int cache_ops_need_broadcast(void)
 {
+	if (!is_smp())
+		return 0;
+
 	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1;
 }
+#endif
 
 #endif
diff --git a/arch/arm/include/asm/stackprotector.h b/arch/arm/include/asm/stackprotector.h
new file mode 100644
index 000000000000..de003327be97
--- /dev/null
+++ b/arch/arm/include/asm/stackprotector.h
@@ -0,0 +1,38 @@
+/*
+ * GCC stack protector support.
+ *
+ * Stack protector works by putting predefined pattern at the start of
+ * the stack frame and verifying that it hasn't been overwritten when
+ * returning from the function.  The pattern is called stack canary
+ * and gcc expects it to be defined by a global variable called
+ * "__stack_chk_guard" on ARM.  This unfortunately means that on SMP
+ * we cannot have a different canary value per task.
+ */
+
+#ifndef _ASM_STACKPROTECTOR_H
+#define _ASM_STACKPROTECTOR_H 1
+
+#include <linux/random.h>
+#include <linux/version.h>
+
+extern unsigned long __stack_chk_guard;
+
+/*
+ * Initialize the stackprotector canary value.
+ *
+ * NOTE: this must only be called from functions that never return,
+ * and it must always be inlined.
+ */
+static __always_inline void boot_init_stack_canary(void)
+{
+	unsigned long canary;
+
+	/* Try to get a semi random initial value. */
+	get_random_bytes(&canary, sizeof(canary));
+	canary ^= LINUX_VERSION_CODE;
+
+	current->stack_canary = canary;
+	__stack_chk_guard = current->stack_canary;
+}
+
+#endif	/* _ASM_STACKPROTECTOR_H */
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 5f4f48002734..1120f18a6b17 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -83,7 +83,11 @@ void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
 
 void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
 				       struct pt_regs *),
-		     int sig, const char *name);
+		     int sig, int code, const char *name);
+
+void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int,
+				       struct pt_regs *),
+		     int sig, int code, const char *name);
 
 #define xchg(ptr,x) \
 	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
@@ -325,6 +329,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 extern void disable_hlt(void);
 extern void enable_hlt(void);
 
+void cpu_idle_wait(void);
+
 #include <asm-generic/cmpxchg-local.h>
 
 #if __LINUX_ARM_ARCH__ < 6
diff --git a/arch/arm/include/asm/termbits.h b/arch/arm/include/asm/termbits.h
index f784d11f40b5..704135d28d1d 100644
--- a/arch/arm/include/asm/termbits.h
+++ b/arch/arm/include/asm/termbits.h
@@ -177,6 +177,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 /* tcflow() and TCXONC use these */
 #define	TCOOFF		0
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 763e29fa8530..7b5cc8dae06e 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -144,6 +144,7 @@ extern void vfp_flush_hwstate(struct thread_info *);
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
 #define TIF_RESTORE_SIGMASK	20
+#define TIF_SECCOMP		21
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
@@ -153,6 +154,7 @@ extern void vfp_flush_hwstate(struct thread_info *);
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index bd863d8608cd..ce7378ea15a2 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -70,6 +70,10 @@
 #undef _TLB
 #undef MULTI_TLB
 
+#ifdef CONFIG_SMP_ON_UP
+#define MULTI_TLB 1
+#endif
+
 #define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
 
 #ifdef CONFIG_CPU_TLB_V3
@@ -185,17 +189,23 @@
 # define v6wbi_always_flags	(-1UL)
 #endif
 
-#ifdef CONFIG_SMP
-#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
+#define v7wbi_tlb_flags_smp	(TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
 			 TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
-#else
-#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+#define v7wbi_tlb_flags_up	(TLB_WB | TLB_DCLEAN | TLB_BTB | \
 			 TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
-#endif
 
 #ifdef CONFIG_CPU_TLB_V7
-# define v7wbi_possible_flags	v7wbi_tlb_flags
-# define v7wbi_always_flags	v7wbi_tlb_flags
+
+# ifdef CONFIG_SMP_ON_UP
+#  define v7wbi_possible_flags	(v7wbi_tlb_flags_smp | v7wbi_tlb_flags_up)
+#  define v7wbi_always_flags	(v7wbi_tlb_flags_smp & v7wbi_tlb_flags_up)
+# elif defined(CONFIG_SMP)
+#  define v7wbi_possible_flags	v7wbi_tlb_flags_smp
+#  define v7wbi_always_flags	v7wbi_tlb_flags_smp
+# else
+#  define v7wbi_possible_flags	v7wbi_tlb_flags_up
+#  define v7wbi_always_flags	v7wbi_tlb_flags_up
+# endif
 # ifdef _TLB
 #  define MULTI_TLB 1
 # else
@@ -378,7 +388,11 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_flag(TLB_V6_I_ASID))
 		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
 	if (tlb_flag(TLB_V7_UIS_ASID))
+#ifdef CONFIG_ARM_ERRATA_720789
+		asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
+#else
 		asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
+#endif
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -424,7 +438,11 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
 	if (tlb_flag(TLB_V7_UIS_PAGE))
+#ifdef CONFIG_ARM_ERRATA_720789
+		asm("mcr p15, 0, %0, c8, c3, 3" : : "r" (uaddr & PAGE_MASK) : "cc");
+#else
 		asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
+#endif
 
 	if (tlb_flag(TLB_BTB)) {
 		/* flush the branch target cache */
@@ -552,12 +570,20 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
 #endif
 
 /*
- * if PG_dcache_dirty is set for the page, we need to ensure that any
+ * If PG_dcache_clean is not set for the page, we need to ensure that any
  * cache entries for the kernels virtual memory range are written
- * back to the page.
+ * back to the page. On ARMv6 and later, the cache coherency is handled via
+ * the set_pte_at() function.
  */
+#if __LINUX_ARM_ARCH__ < 6
 extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
 	pte_t *ptep);
+#else
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+				    unsigned long addr, pte_t *ptep)
+{
+}
+#endif
 
 #endif
 
diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
new file mode 100644
index 000000000000..e71d6ff8d104
--- /dev/null
+++ b/arch/arm/include/asm/tls.h
@@ -0,0 +1,46 @@
+#ifndef __ASMARM_TLS_H
+#define __ASMARM_TLS_H
+
+#ifdef __ASSEMBLY__
+	.macro set_tls_none, tp, tmp1, tmp2
+	.endm
+
+	.macro set_tls_v6k, tp, tmp1, tmp2
+	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	.endm
+
+	.macro set_tls_v6, tp, tmp1, tmp2
+	ldr	\tmp1, =elf_hwcap
+	ldr	\tmp1, [\tmp1, #0]
+	mov	\tmp2, #0xffff0fff
+	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
+	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
+	.endm
+
+	.macro set_tls_software, tp, tmp1, tmp2
+	mov	\tmp1, #0xffff0fff
+	str	\tp, [\tmp1, #-15]		@ set TLS value at 0xffff0ff0
+	.endm
+#endif
+
+#ifdef CONFIG_TLS_REG_EMUL
+#define tls_emu		1
+#define has_tls_reg		1
+#define set_tls		set_tls_none
+#elif __LINUX_ARM_ARCH__ >= 7 ||					\
+	(__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K))
+#define tls_emu		0
+#define has_tls_reg		1
+#define set_tls		set_tls_v6k
+#elif __LINUX_ARM_ARCH__ == 6
+#define tls_emu		0
+#define has_tls_reg		(elf_hwcap & HWCAP_TLS)
+#define set_tls		set_tls_v6
+#else
+#define tls_emu		0
+#define has_tls_reg		0
+#define set_tls		set_tls_software
+#endif
+
+#endif	/* __ASMARM_TLS_H */
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index dd2bf53000fe..c891eb76c0e3 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -392,6 +392,10 @@
 #define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
 #define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
 #define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
+#define __NR_accept4			(__NR_SYSCALL_BASE+366)
+#define __NR_fanotify_init		(__NR_SYSCALL_BASE+367)
+#define __NR_fanotify_mark		(__NR_SYSCALL_BASE+368)
+#define __NR_prlimit64			(__NR_SYSCALL_BASE+369)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
index 422f3cc204a2..3d5fc41ae8d3 100644
--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -3,6 +3,8 @@
  *
  * Assembler-only file containing VFP macros and register definitions.
  */
+#include <asm/hwcap.h>
+
 #include "vfp.h"
 
 @ Macros to allow building with old toolkits (with no VFP support)
@@ -22,12 +24,20 @@
 	LDC	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d0-d15}
 #endif
 #ifdef CONFIG_VFPv3
+#if __LINUX_ARM_ARCH__ <= 6
+	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
+	ldr	\tmp, [\tmp, #0]
+	tst	\tmp, #HWCAP_VFPv3D16
+	ldceq	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
 	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #endif
+#endif
 	.endm
 
 	@ write all the working registers out of the VFP
@@ -38,10 +48,18 @@
 	STC	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d0-d15}
 #endif
 #ifdef CONFIG_VFPv3
+#if __LINUX_ARM_ARCH__ <= 6
+	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
+	ldr	\tmp, [\tmp, #0]
+	tst	\tmp, #HWCAP_VFPv3D16
+	stceq	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
 	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #endif
+#endif
 	.endm
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 26d302c28e13..5b9b268f4fbb 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -13,10 +13,12 @@ CFLAGS_REMOVE_return_address.o = -pg
 
 # Object file lists.
 
-obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
+obj-y		:= elf.o entry-armv.o entry-common.o irq.o \
 		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
+obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
+
 obj-$(CONFIG_LEDS)		+= leds.o
 obj-$(CONFIG_OC_ETM)		+= etm.o
 
@@ -39,6 +41,8 @@ obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
 obj-$(CONFIG_HAVE_TCM)		+= tcm.o
+obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 8214bfebfaca..e5e1e5387678 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -165,6 +165,8 @@ EXPORT_SYMBOL(_find_next_bit_be);
 #endif
 
 #ifdef CONFIG_FUNCTION_TRACER
+#ifdef CONFIG_OLD_MCOUNT
 EXPORT_SYMBOL(mcount);
+#endif
 EXPORT_SYMBOL(__gnu_mcount_nc);
 #endif
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 883511522fca..82da66172132 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -40,6 +40,9 @@
 int main(void)
 {
   DEFINE(TSK_ACTIVE_MM,		offsetof(struct task_struct, active_mm));
+#ifdef CONFIG_CC_STACKPROTECTOR
+  DEFINE(TSK_STACK_CANARY,	offsetof(struct task_struct, stack_canary));
+#endif
   BLANK();
   DEFINE(TI_FLAGS,		offsetof(struct thread_info, flags));
   DEFINE(TI_PREEMPT,		offsetof(struct thread_info, preempt_count));
@@ -99,8 +102,6 @@ int main(void)
   DEFINE(SIZEOF_MACHINE_DESC,	sizeof(struct machine_desc));
   DEFINE(MACHINFO_TYPE,		offsetof(struct machine_desc, nr));
   DEFINE(MACHINFO_NAME,		offsetof(struct machine_desc, name));
-  DEFINE(MACHINFO_PHYSIO,	offsetof(struct machine_desc, phys_io));
-  DEFINE(MACHINFO_PGOFFIO,	offsetof(struct machine_desc, io_pg_offst));
   BLANK();
   DEFINE(PROC_INFO_SZ,		sizeof(struct proc_info_list));
   DEFINE(PROCINFO_INITFUNC,	offsetof(struct proc_info_list, __cpu_flush));
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 37ae301cc47c..5c26eccef998 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -375,6 +375,10 @@
 		CALL(sys_rt_tgsigqueueinfo)
 		CALL(sys_perf_event_open)
 /* 365 */	CALL(sys_recvmmsg)
+		CALL(sys_accept4)
+		CALL(sys_fanotify_init)
+		CALL(sys_fanotify_mark)
+		CALL(sys_prlimit64)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/compat.c
index 0a1385442f43..925652318b8b 100644
--- a/arch/arm/kernel/compat.c
+++ b/arch/arm/kernel/compat.c
@@ -217,10 +217,3 @@ void __init convert_to_tag_list(struct tag *tags)
 	struct param_struct *params = (struct param_struct *)tags;
 	build_tag_list(params, &params->u2);
 }
-
-void __init squash_mem_tags(struct tag *tag)
-{
-	for (; tag->hdr.size; tag = tag_next(tag))
-		if (tag->hdr.tag == ATAG_MEM)
-			tag->hdr.tag = ATAG_NONE;
-}
diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h
index 27e61a68bd1c..39264ab1b9c6 100644
--- a/arch/arm/kernel/compat.h
+++ b/arch/arm/kernel/compat.h
@@ -9,5 +9,3 @@
 */
 
 extern void convert_to_tag_list(struct tag *tags);
-
-extern void squash_mem_tags(struct tag *tag);
diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c
new file mode 100644
index 000000000000..cd3b853a8a6d
--- /dev/null
+++ b/arch/arm/kernel/crash_dump.c
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/kernel/crash_dump.c
+ *
+ * Copyright (C) 2010 Nokia Corporation.
+ * Author: Mika Westerberg
+ *
+ * This code is taken from arch/x86/kernel/crash_dump_64.c
+ *   Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
+ *   Copyright (C) IBM Corporation, 2004. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/crash_dump.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+/* stores the physical address of elf header of crash image */
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+
+/**
+ * copy_oldmem_page() - copy one page from old kernel memory
+ * @pfn: page frame number to be copied
+ * @buf: buffer where the copied page is placed
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page
+ * @userbuf: if set, @buf is int he user address space
+ *
+ * This function copies one page from old kernel memory into buffer pointed by
+ * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes
+ * copied or negative error in case of failure.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+			 size_t csize, unsigned long offset,
+			 int userbuf)
+{
+	void *vaddr;
+
+	if (!csize)
+		return 0;
+
+	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+	if (!vaddr)
+		return -ENOMEM;
+
+	if (userbuf) {
+		if (copy_to_user(buf, vaddr + offset, csize)) {
+			iounmap(vaddr);
+			return -EFAULT;
+		}
+	} else {
+		memcpy(buf, vaddr + offset, csize);
+	}
+
+	iounmap(vaddr);
+	return csize;
+}
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index a38b4879441d..a0f07521ca8a 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -22,11 +22,11 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 		@@ debug using ARM EmbeddedICE DCC channel
 
-#if defined(CONFIG_CPU_V6)
-
-		.macro	addruart, rx, tmp
+		.macro	addruart, rp, rv
 		.endm
 
+#if defined(CONFIG_CPU_V6)
+
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c0, c5, 0
 		.endm
@@ -51,9 +51,6 @@
 
 #elif defined(CONFIG_CPU_V7)
 
-		.macro	addruart, rx, tmp
-		.endm
-
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c0, c5, 0
 		.endm
@@ -71,9 +68,6 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 
 #elif defined(CONFIG_CPU_XSCALE)
 
-		.macro	addruart, rx, tmp
-		.endm
-
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c8, c0, 0
 		.endm
@@ -98,9 +92,6 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 
 #else
 
-		.macro	addruart, rx, tmp
-		.endm
-
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c1, c0, 0
 		.endm
@@ -130,6 +121,22 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 #include <mach/debug-macro.S>
 #endif	/* CONFIG_DEBUG_ICEDCC */
 
+#ifdef CONFIG_MMU
+		.macro	addruart_current, rx, tmp1, tmp2
+		addruart	\tmp1, \tmp2
+		mrc		p15, 0, \rx, c1, c0
+		tst		\rx, #1
+		moveq		\rx, \tmp1
+		movne		\rx, \tmp2
+		.endm
+
+#else /* !CONFIG_MMU */
+		.macro	addruart_current, rx, tmp1, tmp2
+		addruart	\rx, \tmp1
+		.endm
+
+#endif /* CONFIG_MMU */
+
 /*
  * Useful debugging routines
  */
@@ -164,7 +171,7 @@ ENDPROC(printhex2)
 		.ltorg
 
 ENTRY(printascii)
-		addruart r3, r1
+		addruart_current r3, r1, r2
 		b	2f
 1:		waituart r2, r3
 		senduart r1, r3
@@ -180,7 +187,7 @@ ENTRY(printascii)
 ENDPROC(printascii)
 
 ENTRY(printch)
-		addruart r3, r1
+		addruart_current r3, r1, r2
 		mov	r1, r0
 		mov	r0, #0
 		b	1b
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 3fd7861de4d1..c09e3573c5de 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -22,6 +22,7 @@
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
 #include <asm/unistd.h>
+#include <asm/tls.h>
 
 #include "entry-header.S"
 
@@ -45,7 +46,8 @@
 	 * this macro assumes that irqstat (r6) and base (r5) are
 	 * preserved from get_irqnr_and_base above
 	 */
-	test_for_ipi r0, r6, r5, lr
+	ALT_SMP(test_for_ipi r0, r6, r5, lr)
+	ALT_UP_B(9997f)
 	movne	r0, sp
 	adrne	lr, BSYM(1b)
 	bne	do_IPI
@@ -56,6 +58,7 @@
 	adrne	lr, BSYM(1b)
 	bne	do_local_timer
 #endif
+9997:
 #endif
 
 	.endm
@@ -735,11 +738,11 @@ ENTRY(__switch_to)
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
-#if defined(CONFIG_HAS_TLS_REG)
-	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
-#elif !defined(CONFIG_TLS_REG_EMUL)
-	mov	r4, #0xffff0fff
-	str	r3, [r4, #-15]			@ TLS val at 0xffff0ff0
+	set_tls	r3, r4, r5
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	ldr	r7, [r2, #TI_TASK]
+	ldr	r8, =__stack_chk_guard
+	ldr	r7, [r7, #TSK_STACK_CANARY]
 #endif
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
@@ -749,6 +752,9 @@ ENTRY(__switch_to)
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
+#if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP)
+	str	r7, [r8]
+#endif
  THUMB(	mov	ip, r4			   )
 	mov	r0, r5
  ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
@@ -961,11 +967,8 @@ kuser_cmpxchg_fixup:
 	beq	1b
 	rsbs	r0, r3, #0
 	/* beware -- each __kuser slot must be 8 instructions max */
-#ifdef CONFIG_SMP
-	b	__kuser_memory_barrier
-#else
-	usr_ret	lr
-#endif
+	ALT_SMP(b	__kuser_memory_barrier)
+	ALT_UP(usr_ret	lr)
 
 #endif
 
@@ -1005,17 +1008,12 @@ kuser_cmpxchg_fixup:
  */
 
 __kuser_get_tls:				@ 0xffff0fe0
-
-#if !defined(CONFIG_HAS_TLS_REG) && !defined(CONFIG_TLS_REG_EMUL)
-	ldr	r0, [pc, #(16 - 8)]		@ TLS stored at 0xffff0ff0
-#else
-	mrc	p15, 0, r0, c13, c0, 3		@ read TLS register
-#endif
+	ldr	r0, [pc, #(16 - 8)]	@ read TLS, set in kuser_get_tls_init
 	usr_ret	lr
-
-	.rep	5
-	.word	0			@ pad up to __kuser_helper_version
-	.endr
+	mrc	p15, 0, r0, c13, c0, 3	@ 0xffff0fe8 hardware TLS code
+	.rep	4
+	.word	0			@ 0xffff0ff0 software TLS value, then
+	.endr				@ pad up to __kuser_helper_version
 
 /*
  * Reference declaration:
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 2c1db77d7848..8bfa98757cd2 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -48,6 +48,8 @@ work_pending:
 	beq	no_work_pending
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
+	tst	r1, #_TIF_SIGPENDING		@ delivering a signal?
+	movne	why, #0				@ prevent further restarts
 	bl	do_notify_resume
 	b	ret_slow_syscall		@ Check work again
 
@@ -92,75 +94,150 @@ ENDPROC(ret_from_fork)
 #define CALL(x) .long x
 
 #ifdef CONFIG_FUNCTION_TRACER
-#ifdef CONFIG_DYNAMIC_FTRACE
-ENTRY(mcount)
-	stmdb sp!, {r0-r3, lr}
-	mov r0, lr
-	sub r0, r0, #MCOUNT_INSN_SIZE
+/*
+ * When compiling with -pg, gcc inserts a call to the mcount routine at the
+ * start of every function.  In mcount, apart from the function's address (in
+ * lr), we need to get hold of the function's caller's address.
+ *
+ * Older GCCs (pre-4.4) inserted a call to a routine called mcount like this:
+ *
+ *	bl	mcount
+ *
+ * These versions have the limitation that in order for the mcount routine to
+ * be able to determine the function's caller's address, an APCS-style frame
+ * pointer (which is set up with something like the code below) is required.
+ *
+ *	mov     ip, sp
+ *	push    {fp, ip, lr, pc}
+ *	sub     fp, ip, #4
+ *
+ * With EABI, these frame pointers are not available unless -mapcs-frame is
+ * specified, and if building as Thumb-2, not even then.
+ *
+ * Newer GCCs (4.4+) solve this problem by introducing a new version of mcount,
+ * with call sites like:
+ *
+ *	push	{lr}
+ *	bl	__gnu_mcount_nc
+ *
+ * With these compilers, frame pointers are not necessary.
+ *
+ * mcount can be thought of as a function called in the middle of a subroutine
+ * call.  As such, it needs to be transparent for both the caller and the
+ * callee: the original lr needs to be restored when leaving mcount, and no
+ * registers should be clobbered.  (In the __gnu_mcount_nc implementation, we
+ * clobber the ip register.  This is OK because the ARM calling convention
+ * allows it to be clobbered in subroutines and doesn't use it to hold
+ * parameters.)
+ *
+ * When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0"
+ * for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see
+ * arch/arm/kernel/ftrace.c).
+ */
 
-	.globl mcount_call
-mcount_call:
-	bl ftrace_stub
-	ldr lr, [fp, #-4]			@ restore lr
-	ldmia sp!, {r0-r3, pc}
+#ifndef CONFIG_OLD_MCOUNT
+#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4))
+#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0.
+#endif
+#endif
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(__gnu_mcount_nc)
+	mov	ip, lr
+	ldmia	sp!, {lr}
+	mov	pc, ip
+ENDPROC(__gnu_mcount_nc)
 
 ENTRY(ftrace_caller)
-	stmdb sp!, {r0-r3, lr}
-	ldr r1, [fp, #-4]
-	mov r0, lr
-	sub r0, r0, #MCOUNT_INSN_SIZE
+	stmdb	sp!, {r0-r3, lr}
+	mov	r0, lr
+	sub	r0, r0, #MCOUNT_INSN_SIZE
+	ldr	r1, [sp, #20]
 
-	.globl ftrace_call
+	.global	ftrace_call
 ftrace_call:
-	bl ftrace_stub
-	ldr lr, [fp, #-4]			@ restore lr
-	ldmia sp!, {r0-r3, pc}
+	bl	ftrace_stub
+	ldmia	sp!, {r0-r3, ip, lr}
+	mov	pc, ip
+ENDPROC(ftrace_caller)
+
+#ifdef CONFIG_OLD_MCOUNT
+ENTRY(mcount)
+	stmdb	sp!, {lr}
+	ldr	lr, [fp, #-4]
+	ldmia	sp!, {pc}
+ENDPROC(mcount)
+
+ENTRY(ftrace_caller_old)
+	stmdb	sp!, {r0-r3, lr}
+	ldr	r1, [fp, #-4]
+	mov	r0, lr
+	sub	r0, r0, #MCOUNT_INSN_SIZE
+
+	.globl ftrace_call_old
+ftrace_call_old:
+	bl	ftrace_stub
+	ldr	lr, [fp, #-4]			@ restore lr
+	ldmia	sp!, {r0-r3, pc}
+ENDPROC(ftrace_caller_old)
+#endif
 
 #else
 
 ENTRY(__gnu_mcount_nc)
-	stmdb sp!, {r0-r3, lr}
-	ldr r0, =ftrace_trace_function
-	ldr r2, [r0]
-	adr r0, ftrace_stub
-	cmp r0, r2
-	bne gnu_trace
-	ldmia sp!, {r0-r3, ip, lr}
-	mov pc, ip
+	stmdb	sp!, {r0-r3, lr}
+	ldr	r0, =ftrace_trace_function
+	ldr	r2, [r0]
+	adr	r0, .Lftrace_stub
+	cmp	r0, r2
+	bne	gnu_trace
+	ldmia	sp!, {r0-r3, ip, lr}
+	mov	pc, ip
 
 gnu_trace:
-	ldr r1, [sp, #20]			@ lr of instrumented routine
-	mov r0, lr
-	sub r0, r0, #MCOUNT_INSN_SIZE
-	mov lr, pc
-	mov pc, r2
-	ldmia sp!, {r0-r3, ip, lr}
-	mov pc, ip
-
+	ldr	r1, [sp, #20]			@ lr of instrumented routine
+	mov	r0, lr
+	sub	r0, r0, #MCOUNT_INSN_SIZE
+	adr	lr, BSYM(1f)
+	mov	pc, r2
+1:
+	ldmia	sp!, {r0-r3, ip, lr}
+	mov	pc, ip
+ENDPROC(__gnu_mcount_nc)
+
+#ifdef CONFIG_OLD_MCOUNT
+/*
+ * This is under an ifdef in order to force link-time errors for people trying
+ * to build with !FRAME_POINTER with a GCC which doesn't use the new-style
+ * mcount.
+ */
 ENTRY(mcount)
-	stmdb sp!, {r0-r3, lr}
-	ldr r0, =ftrace_trace_function
-	ldr r2, [r0]
-	adr r0, ftrace_stub
-	cmp r0, r2
-	bne trace
-	ldr lr, [fp, #-4]			@ restore lr
-	ldmia sp!, {r0-r3, pc}
+	stmdb	sp!, {r0-r3, lr}
+	ldr	r0, =ftrace_trace_function
+	ldr	r2, [r0]
+	adr	r0, ftrace_stub
+	cmp	r0, r2
+	bne	trace
+	ldr	lr, [fp, #-4]			@ restore lr
+	ldmia	sp!, {r0-r3, pc}
 
 trace:
-	ldr r1, [fp, #-4]			@ lr of instrumented routine
-	mov r0, lr
-	sub r0, r0, #MCOUNT_INSN_SIZE
-	mov lr, pc
-	mov pc, r2
-	ldr lr, [fp, #-4]			@ restore lr
-	ldmia sp!, {r0-r3, pc}
+	ldr	r1, [fp, #-4]			@ lr of instrumented routine
+	mov	r0, lr
+	sub	r0, r0, #MCOUNT_INSN_SIZE
+	mov	lr, pc
+	mov	pc, r2
+	ldr	lr, [fp, #-4]			@ restore lr
+	ldmia	sp!, {r0-r3, pc}
+ENDPROC(mcount)
+#endif
 
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
-	.globl ftrace_stub
-ftrace_stub:
-	mov pc, lr
+ENTRY(ftrace_stub)
+.Lftrace_stub:
+	mov	pc, lr
+ENDPROC(ftrace_stub)
 
 #endif /* CONFIG_FUNCTION_TRACER */
 
@@ -257,7 +334,6 @@ ENTRY(vector_swi)
 
 	get_thread_info tsk
 	adr	tbl, sys_call_table		@ load syscall table pointer
-	ldr	ip, [tsk, #TI_FLAGS]		@ check for syscall tracing
 
 #if defined(CONFIG_OABI_COMPAT)
 	/*
@@ -274,8 +350,20 @@ ENTRY(vector_swi)
 	eor	scno, scno, #__NR_SYSCALL_BASE	@ check OS number
 #endif
 
+	ldr	r10, [tsk, #TI_FLAGS]		@ check for syscall tracing
 	stmdb	sp!, {r4, r5}			@ push fifth and sixth args
-	tst	ip, #_TIF_SYSCALL_TRACE		@ are we tracing syscalls?
+
+#ifdef CONFIG_SECCOMP
+	tst	r10, #_TIF_SECCOMP
+	beq	1f
+	mov	r0, scno
+	bl	__secure_computing	
+	add	r0, sp, #S_R0 + S_OFF		@ pointer to regs
+	ldmia	r0, {r0 - r3}			@ have to reload r0 - r3
+1:
+#endif
+
+	tst	r10, #_TIF_SYSCALL_TRACE		@ are we tracing syscalls?
 	bne	__sys_trace
 
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
@@ -382,11 +470,13 @@ ENDPROC(sys_clone_wrapper)
 
 sys_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
+		mov	why, #0		@ prevent syscall restart handling
 		b	sys_sigreturn
 ENDPROC(sys_sigreturn_wrapper)
 
 sys_rt_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
+		mov	why, #0		@ prevent syscall restart handling
 		b	sys_rt_sigreturn
 ENDPROC(sys_rt_sigreturn_wrapper)
 
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index 827753966301..11db62806a1a 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -30,6 +30,21 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Alexander Shishkin");
 
+/*
+ * ETM tracer state
+ */
+struct tracectx {
+	unsigned int	etb_bufsz;
+	void __iomem	*etb_regs;
+	void __iomem	*etm_regs;
+	unsigned long	flags;
+	int		ncmppairs;
+	int		etm_portsz;
+	struct device	*dev;
+	struct clk	*emu_clk;
+	struct mutex	mutex;
+};
+
 static struct tracectx tracer;
 
 static inline bool trace_isrunning(struct tracectx *t)
@@ -230,7 +245,7 @@ static void etm_dump(void)
 	etb_lock(t);
 }
 
-static void sysrq_etm_dump(int key, struct tty_struct *tty)
+static void sysrq_etm_dump(int key)
 {
 	dev_dbg(tracer.dev, "Dumping ETB buffer\n");
 	etm_dump();
@@ -314,6 +329,7 @@ static const struct file_operations etb_fops = {
 	.read = etb_read,
 	.open = etb_open,
 	.release = etb_release,
+	.llseek = no_llseek,
 };
 
 static struct miscdevice etb_miscdev = {
@@ -543,7 +559,9 @@ static int __init etm_probe(struct amba_device *dev, struct amba_id *id)
 	t->etm_portsz = 1;
 
 	etm_unlock(t);
-	ret = etm_readl(t, CSCR_PRSR);
+	(void)etm_readl(t, ETMMR_PDSR);
+	/* dummy first read */
+	(void)etm_readl(&tracer, ETMMR_OSSRR);
 
 	t->ncmppairs = etm_readl(t, ETMR_CONFCODE) & 0xf;
 	etm_writel(t, 0x440, ETMR_CTRL);
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 0298286ad4ad..971ac8c36ea7 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -2,102 +2,194 @@
  * Dynamic function tracing support.
  *
  * Copyright (C) 2008 Abhishek Sagar <sagar.abhishek@gmail.com>
+ * Copyright (C) 2010 Rabin Vincent <rabin@rab.in>
  *
  * For licencing details, see COPYING.
  *
  * Defines low-level handling of mcount calls when the kernel
  * is compiled with the -pg flag. When using dynamic ftrace, the
- * mcount call-sites get patched lazily with NOP till they are
- * enabled. All code mutation routines here take effect atomically.
+ * mcount call-sites get patched with NOP till they are enabled.
+ * All code mutation routines here are called under stop_machine().
  */
 
 #include <linux/ftrace.h>
+#include <linux/uaccess.h>
 
 #include <asm/cacheflush.h>
 #include <asm/ftrace.h>
 
-#define PC_OFFSET      8
-#define BL_OPCODE      0xeb000000
-#define BL_OFFSET_MASK 0x00ffffff
+#ifdef CONFIG_THUMB2_KERNEL
+#define	NOP		0xeb04f85d	/* pop.w {lr} */
+#else
+#define	NOP		0xe8bd4000	/* pop {lr} */
+#endif
 
-static unsigned long bl_insn;
-static const unsigned long NOP = 0xe1a00000; /* mov r0, r0 */
+#ifdef CONFIG_OLD_MCOUNT
+#define OLD_MCOUNT_ADDR	((unsigned long) mcount)
+#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
 
-unsigned char *ftrace_nop_replace(void)
+#define	OLD_NOP		0xe1a00000	/* mov r0, r0 */
+
+static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
 {
-	return (char *)&NOP;
+	return rec->arch.old_mcount ? OLD_NOP : NOP;
 }
 
+static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
+{
+	if (!rec->arch.old_mcount)
+		return addr;
+
+	if (addr == MCOUNT_ADDR)
+		addr = OLD_MCOUNT_ADDR;
+	else if (addr == FTRACE_ADDR)
+		addr = OLD_FTRACE_ADDR;
+
+	return addr;
+}
+#else
+static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
+{
+	return NOP;
+}
+
+static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
+{
+	return addr;
+}
+#endif
+
 /* construct a branch (BL) instruction to addr */
-unsigned char *ftrace_call_replace(unsigned long pc, unsigned long addr)
+#ifdef CONFIG_THUMB2_KERNEL
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
 {
+	unsigned long s, j1, j2, i1, i2, imm10, imm11;
+	unsigned long first, second;
 	long offset;
 
-	offset = (long)addr - (long)(pc + PC_OFFSET);
+	offset = (long)addr - (long)(pc + 4);
+	if (offset < -16777216 || offset > 16777214) {
+		WARN_ON_ONCE(1);
+		return 0;
+	}
+
+	s	= (offset >> 24) & 0x1;
+	i1	= (offset >> 23) & 0x1;
+	i2	= (offset >> 22) & 0x1;
+	imm10	= (offset >> 12) & 0x3ff;
+	imm11	= (offset >>  1) & 0x7ff;
+
+	j1 = (!i1) ^ s;
+	j2 = (!i2) ^ s;
+
+	first = 0xf000 | (s << 10) | imm10;
+	second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11;
+
+	return (second << 16) | first;
+}
+#else
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+{
+	long offset;
+
+	offset = (long)addr - (long)(pc + 8);
 	if (unlikely(offset < -33554432 || offset > 33554428)) {
 		/* Can't generate branches that far (from ARM ARM). Ftrace
 		 * doesn't generate branches outside of kernel text.
 		 */
 		WARN_ON_ONCE(1);
-		return NULL;
+		return 0;
 	}
-	offset = (offset >> 2) & BL_OFFSET_MASK;
-	bl_insn = BL_OPCODE | offset;
-	return (unsigned char *)&bl_insn;
-}
 
-int ftrace_modify_code(unsigned long pc, unsigned char *old_code,
-		       unsigned char *new_code)
-{
-	unsigned long err = 0, replaced = 0, old, new;
+	offset = (offset >> 2) & 0x00ffffff;
 
-	old = *(unsigned long *)old_code;
-	new = *(unsigned long *)new_code;
+	return 0xeb000000 | offset;
+}
+#endif
 
-	__asm__ __volatile__ (
-		"1:  ldr    %1, [%2]  \n"
-		"    cmp    %1, %4    \n"
-		"2:  streq  %3, [%2]  \n"
-		"    cmpne  %1, %3    \n"
-		"    movne  %0, #2    \n"
-		"3:\n"
+static int ftrace_modify_code(unsigned long pc, unsigned long old,
+			      unsigned long new)
+{
+	unsigned long replaced;
 
-		".pushsection .fixup, \"ax\"\n"
-		"4:  mov  %0, #1  \n"
-		"    b    3b      \n"
-		".popsection\n"
+	if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE))
+		return -EFAULT;
 
-		".pushsection __ex_table, \"a\"\n"
-		"    .long 1b, 4b \n"
-		"    .long 2b, 4b \n"
-		".popsection\n"
+	if (replaced != old)
+		return -EINVAL;
 
-		: "=r"(err), "=r"(replaced)
-		: "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)
-		: "memory");
+	if (probe_kernel_write((void *)pc, &new, MCOUNT_INSN_SIZE))
+		return -EPERM;
 
-	if (!err && (replaced == old))
-		flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
+	flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
 
-	return err;
+	return 0;
 }
 
 int ftrace_update_ftrace_func(ftrace_func_t func)
 {
-	int ret;
 	unsigned long pc, old;
-	unsigned char *new;
+	unsigned long new;
+	int ret;
 
 	pc = (unsigned long)&ftrace_call;
 	memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE);
 	new = ftrace_call_replace(pc, (unsigned long)func);
-	ret = ftrace_modify_code(pc, (unsigned char *)&old, new);
+
+	ret = ftrace_modify_code(pc, old, new);
+
+#ifdef CONFIG_OLD_MCOUNT
+	if (!ret) {
+		pc = (unsigned long)&ftrace_call_old;
+		memcpy(&old, &ftrace_call_old, MCOUNT_INSN_SIZE);
+		new = ftrace_call_replace(pc, (unsigned long)func);
+
+		ret = ftrace_modify_code(pc, old, new);
+	}
+#endif
+
+	return ret;
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long new, old;
+	unsigned long ip = rec->ip;
+
+	old = ftrace_nop_replace(rec);
+	new = ftrace_call_replace(ip, adjust_address(rec, addr));
+
+	return ftrace_modify_code(rec->ip, old, new);
+}
+
+int ftrace_make_nop(struct module *mod,
+		    struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long ip = rec->ip;
+	unsigned long old;
+	unsigned long new;
+	int ret;
+
+	old = ftrace_call_replace(ip, adjust_address(rec, addr));
+	new = ftrace_nop_replace(rec);
+	ret = ftrace_modify_code(ip, old, new);
+
+#ifdef CONFIG_OLD_MCOUNT
+	if (ret == -EINVAL && addr == MCOUNT_ADDR) {
+		rec->arch.old_mcount = true;
+
+		old = ftrace_call_replace(ip, adjust_address(rec, addr));
+		new = ftrace_nop_replace(rec);
+		ret = ftrace_modify_code(ip, old, new);
+	}
+#endif
+
 	return ret;
 }
 
-/* run from ftrace_init with irqs disabled */
 int __init ftrace_dyn_arch_init(void *data)
 {
-	ftrace_mcount_set(data);
+	*(unsigned long *)data = 0;
+
 	return 0;
 }
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index b9505aa267c0..bbecaac1e013 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -15,55 +15,6 @@
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
 #define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
 
-	.align	2
-	.type	__switch_data, %object
-__switch_data:
-	.long	__mmap_switched
-	.long	__data_loc			@ r4
-	.long	_data				@ r5
-	.long	__bss_start			@ r6
-	.long	_end				@ r7
-	.long	processor_id			@ r4
-	.long	__machine_arch_type		@ r5
-	.long	__atags_pointer			@ r6
-	.long	cr_alignment			@ r7
-	.long	init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on in MMU mode,
- * and uses absolute addresses; this is not position independent.
- *
- *  r0  = cp#15 control register
- *  r1  = machine ID
- *  r2  = atags pointer
- *  r9  = processor ID
- */
-__mmap_switched:
-	adr	r3, __switch_data + 4
-
-	ldmia	r3!, {r4, r5, r6, r7}
-	cmp	r4, r5				@ Copy data segment if needed
-1:	cmpne	r5, r6
-	ldrne	fp, [r4], #4
-	strne	fp, [r5], #4
-	bne	1b
-
-	mov	fp, #0				@ Clear BSS (and zero fp)
-1:	cmp	r6, r7
-	strcc	fp, [r6],#4
-	bcc	1b
-
- ARM(	ldmia	r3, {r4, r5, r6, r7, sp})
- THUMB(	ldmia	r3, {r4, r5, r6, r7}	)
- THUMB(	ldr	sp, [r3, #16]		)
-	str	r9, [r4]			@ Save processor ID
-	str	r1, [r5]			@ Save machine type
-	str	r2, [r6]			@ Save atags pointer
-	bic	r4, r0, #CR_A			@ Clear 'A' bit
-	stmia	r7, {r0, r4}			@ Save control register values
-	b	start_kernel
-ENDPROC(__mmap_switched)
-
 /*
  * Exception handling.  Something went wrong and we can't proceed.  We
  * ought to tell the user, but since we don't have any guarantee that
@@ -73,21 +24,7 @@ ENDPROC(__mmap_switched)
  * and hope for the best (useful if bootloader fails to pass a proper
  * machine ID for example).
  */
-__error_p:
-#ifdef CONFIG_DEBUG_LL
-	adr	r0, str_p1
-	bl	printascii
-	mov	r0, r9
-	bl	printhex8
-	adr	r0, str_p2
-	bl	printascii
-	b	__error
-str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant (0x"
-str_p2:	.asciz	").\n"
-	.align
-#endif
-ENDPROC(__error_p)
-
+	__HEAD
 __error_a:
 #ifdef CONFIG_DEBUG_LL
 	mov	r4, r1				@ preserve machine ID
@@ -97,7 +34,7 @@ __error_a:
 	bl	printhex8
 	adr	r0, str_a2
 	bl	printascii
-	adr	r3, 4f
+	adr	r3, __lookup_machine_type_data
 	ldmia	r3, {r4, r5, r6}		@ get machine desc list
 	sub	r4, r3, r4			@ get offset between virt&phys
 	add	r5, r5, r4			@ convert virt addresses to
@@ -125,78 +62,6 @@ str_a3:	.asciz	"\nPlease check your kernel config and/or bootloader.\n"
 	.align
 #endif
 
-__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
-	mov	r0, #0x02000000
-	mov	r3, #0x11
-	orr	r3, r3, r3, lsl #8
-	orr	r3, r3, r3, lsl #16
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-#endif
-1:	mov	r0, r0
-	b	1b
-ENDPROC(__error)
-
-
-/*
- * Read processor ID register (CP#15, CR0), and look up in the linker-built
- * supported processor list.  Note that we can't use the absolute addresses
- * for the __proc_info lists since we aren't running with the MMU on
- * (and therefore, we are not in the correct address space).  We have to
- * calculate the offset.
- *
- *	r9 = cpuid
- * Returns:
- *	r3, r4, r6 corrupted
- *	r5 = proc_info pointer in physical address space
- *	r9 = cpuid (preserved)
- */
-__lookup_processor_type:
-	adr	r3, 3f
-	ldmia	r3, {r5 - r7}
-	add	r3, r3, #8
-	sub	r3, r3, r7			@ get offset between virt&phys
-	add	r5, r5, r3			@ convert virt addresses to
-	add	r6, r6, r3			@ physical address space
-1:	ldmia	r5, {r3, r4}			@ value, mask
-	and	r4, r4, r9			@ mask wanted bits
-	teq	r3, r4
-	beq	2f
-	add	r5, r5, #PROC_INFO_SZ		@ sizeof(proc_info_list)
-	cmp	r5, r6
-	blo	1b
-	mov	r5, #0				@ unknown processor
-2:	mov	pc, lr
-ENDPROC(__lookup_processor_type)
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_processor_type)
-	stmfd	sp!, {r4 - r7, r9, lr}
-	mov	r9, r0
-	bl	__lookup_processor_type
-	mov	r0, r5
-	ldmfd	sp!, {r4 - r7, r9, pc}
-ENDPROC(lookup_processor_type)
-
-/*
- * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
- * more information about the __proc_info and __arch_info structures.
- */
-	.align	2
-3:	.long	__proc_info_begin
-	.long	__proc_info_end
-4:	.long	.
-	.long	__arch_info_begin
-	.long	__arch_info_end
-
 /*
  * Lookup machine architecture in the linker-build list of architectures.
  * Note that we can't use the absolute addresses for the __arch_info
@@ -209,7 +74,7 @@ ENDPROC(lookup_processor_type)
  *  r5 = mach_info pointer in physical address space
  */
 __lookup_machine_type:
-	adr	r3, 4b
+	adr	r3, __lookup_machine_type_data
 	ldmia	r3, {r4, r5, r6}
 	sub	r3, r3, r4			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
@@ -225,15 +90,16 @@ __lookup_machine_type:
 ENDPROC(__lookup_machine_type)
 
 /*
- * This provides a C-API version of the above function.
+ * Look in arch/arm/kernel/arch.[ch] for information about the
+ * __arch_info structures.
  */
-ENTRY(lookup_machine_type)
-	stmfd	sp!, {r4 - r6, lr}
-	mov	r1, r0
-	bl	__lookup_machine_type
-	mov	r0, r5
-	ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(lookup_machine_type)
+	.align	2
+	.type	__lookup_machine_type_data, %object
+__lookup_machine_type_data:
+	.long	.
+	.long	__arch_info_begin
+	.long	__arch_info_end
+	.size	__lookup_machine_type_data, . - __lookup_machine_type_data
 
 /* Determine validity of the r2 atags pointer.  The heuristic requires
  * that the pointer be aligned, in the first 16k of physical RAM and
@@ -265,3 +131,150 @@ __vet_atags:
 1:	mov	r2, #0
 	mov	pc, lr
 ENDPROC(__vet_atags)
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode,
+ * and uses absolute addresses; this is not position independent.
+ *
+ *  r0  = cp#15 control register
+ *  r1  = machine ID
+ *  r2  = atags pointer
+ *  r9  = processor ID
+ */
+	__INIT
+__mmap_switched:
+	adr	r3, __mmap_switched_data
+
+	ldmia	r3!, {r4, r5, r6, r7}
+	cmp	r4, r5				@ Copy data segment if needed
+1:	cmpne	r5, r6
+	ldrne	fp, [r4], #4
+	strne	fp, [r5], #4
+	bne	1b
+
+	mov	fp, #0				@ Clear BSS (and zero fp)
+1:	cmp	r6, r7
+	strcc	fp, [r6],#4
+	bcc	1b
+
+ ARM(	ldmia	r3, {r4, r5, r6, r7, sp})
+ THUMB(	ldmia	r3, {r4, r5, r6, r7}	)
+ THUMB(	ldr	sp, [r3, #16]		)
+	str	r9, [r4]			@ Save processor ID
+	str	r1, [r5]			@ Save machine type
+	str	r2, [r6]			@ Save atags pointer
+	bic	r4, r0, #CR_A			@ Clear 'A' bit
+	stmia	r7, {r0, r4}			@ Save control register values
+	b	start_kernel
+ENDPROC(__mmap_switched)
+
+	.align	2
+	.type	__mmap_switched_data, %object
+__mmap_switched_data:
+	.long	__data_loc			@ r4
+	.long	_sdata				@ r5
+	.long	__bss_start			@ r6
+	.long	_end				@ r7
+	.long	processor_id			@ r4
+	.long	__machine_arch_type		@ r5
+	.long	__atags_pointer			@ r6
+	.long	cr_alignment			@ r7
+	.long	init_thread_union + THREAD_START_SP @ sp
+	.size	__mmap_switched_data, . - __mmap_switched_data
+
+/*
+ * This provides a C-API version of __lookup_machine_type
+ */
+ENTRY(lookup_machine_type)
+	stmfd	sp!, {r4 - r6, lr}
+	mov	r1, r0
+	bl	__lookup_machine_type
+	mov	r0, r5
+	ldmfd	sp!, {r4 - r6, pc}
+ENDPROC(lookup_machine_type)
+
+/*
+ * This provides a C-API version of __lookup_processor_type
+ */
+ENTRY(lookup_processor_type)
+	stmfd	sp!, {r4 - r6, r9, lr}
+	mov	r9, r0
+	bl	__lookup_processor_type
+	mov	r0, r5
+	ldmfd	sp!, {r4 - r6, r9, pc}
+ENDPROC(lookup_processor_type)
+
+/*
+ * Read processor ID register (CP#15, CR0), and look up in the linker-built
+ * supported processor list.  Note that we can't use the absolute addresses
+ * for the __proc_info lists since we aren't running with the MMU on
+ * (and therefore, we are not in the correct address space).  We have to
+ * calculate the offset.
+ *
+ *	r9 = cpuid
+ * Returns:
+ *	r3, r4, r6 corrupted
+ *	r5 = proc_info pointer in physical address space
+ *	r9 = cpuid (preserved)
+ */
+	__CPUINIT
+__lookup_processor_type:
+	adr	r3, __lookup_processor_type_data
+	ldmia	r3, {r4 - r6}
+	sub	r3, r3, r4			@ get offset between virt&phys
+	add	r5, r5, r3			@ convert virt addresses to
+	add	r6, r6, r3			@ physical address space
+1:	ldmia	r5, {r3, r4}			@ value, mask
+	and	r4, r4, r9			@ mask wanted bits
+	teq	r3, r4
+	beq	2f
+	add	r5, r5, #PROC_INFO_SZ		@ sizeof(proc_info_list)
+	cmp	r5, r6
+	blo	1b
+	mov	r5, #0				@ unknown processor
+2:	mov	pc, lr
+ENDPROC(__lookup_processor_type)
+
+/*
+ * Look in <asm/procinfo.h> for information about the __proc_info structure.
+ */
+	.align	2
+	.type	__lookup_processor_type_data, %object
+__lookup_processor_type_data:
+	.long	.
+	.long	__proc_info_begin
+	.long	__proc_info_end
+	.size	__lookup_processor_type_data, . - __lookup_processor_type_data
+
+__error_p:
+#ifdef CONFIG_DEBUG_LL
+	adr	r0, str_p1
+	bl	printascii
+	mov	r0, r9
+	bl	printhex8
+	adr	r0, str_p2
+	bl	printascii
+	b	__error
+str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant (0x"
+str_p2:	.asciz	").\n"
+	.align
+#endif
+ENDPROC(__error_p)
+
+__error:
+#ifdef CONFIG_ARCH_RPC
+/*
+ * Turn the screen red on a error - RiscPC only.
+ */
+	mov	r0, #0x02000000
+	mov	r3, #0x11
+	orr	r3, r3, r3, lsl #8
+	orr	r3, r3, r3, lsl #16
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+#endif
+1:	mov	r0, r0
+	b	1b
+ENDPROC(__error)
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 573b803dc6bf..814ce1a73270 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -48,8 +48,6 @@ ENTRY(stext)
 	movs	r8, r5				@ invalid machine (r5=0)?
 	beq	__error_a			@ yes, error 'a'
 
-	ldr	r13, __switch_data		@ address to jump to after
-						@ the initialization is done
 	adr	lr, BSYM(__after_proc_init)	@ return (PIC) address
  ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
  THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
@@ -87,8 +85,7 @@ __after_proc_init:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 #endif /* CONFIG_CPU_CP15 */
 
-	mov	r3, r13
-	mov	pc, r3				@ clear the BSS and jump
+	b	__mmap_switched			@ clear the BSS and jump
 						@ to start_kernel
 ENDPROC(__after_proc_init)
 	.ltorg
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index eb62bf947212..dd6b369ac69c 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -22,6 +22,10 @@
 #include <asm/thread_info.h>
 #include <asm/system.h>
 
+#ifdef CONFIG_DEBUG_LL
+#include <mach/debug-macro.S>
+#endif
+
 #if (PHYS_OFFSET & 0x001fffff)
 #error "PHYS_OFFSET must be at an even 2MiB boundary!"
 #endif
@@ -86,6 +90,9 @@ ENTRY(stext)
 	movs	r8, r5				@ invalid machine (r5=0)?
 	beq	__error_a			@ yes, error 'a'
 	bl	__vet_atags
+#ifdef CONFIG_SMP_ON_UP
+	bl	__fixup_smp
+#endif
 	bl	__create_page_tables
 
 	/*
@@ -95,113 +102,15 @@ ENTRY(stext)
 	 * above.  On return, the CPU will be ready for the MMU to be
 	 * turned on, and r0 will hold the CPU control register value.
 	 */
-	ldr	r13, __switch_data		@ address to jump to after
+	ldr	r13, =__mmap_switched		@ address to jump to after
 						@ mmu has been enabled
-	adr	lr, BSYM(__enable_mmu)		@ return (PIC) address
+	adr	lr, BSYM(1f)			@ return (PIC) address
  ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
  THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
  THUMB(	mov	pc, r12				)
+1:	b	__enable_mmu
 ENDPROC(stext)
-
-#if defined(CONFIG_SMP)
-ENTRY(secondary_startup)
-	/*
-	 * Common entry point for secondary CPUs.
-	 *
-	 * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
-	 * the processor type - there is no need to check the machine type
-	 * as it has already been validated by the primary processor.
-	 */
-	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
-	mrc	p15, 0, r9, c0, c0		@ get processor id
-	bl	__lookup_processor_type
-	movs	r10, r5				@ invalid processor?
-	moveq	r0, #'p'			@ yes, error 'p'
-	beq	__error
-
-	/*
-	 * Use the page tables supplied from  __cpu_up.
-	 */
-	adr	r4, __secondary_data
-	ldmia	r4, {r5, r7, r12}		@ address to jump to after
-	sub	r4, r4, r5			@ mmu has been enabled
-	ldr	r4, [r7, r4]			@ get secondary_data.pgdir
-	adr	lr, BSYM(__enable_mmu)		@ return address
-	mov	r13, r12			@ __secondary_switched address
- ARM(	add	pc, r10, #PROCINFO_INITFUNC	) @ initialise processor
-						  @ (return control reg)
- THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
- THUMB(	mov	pc, r12				)
-ENDPROC(secondary_startup)
-
-	/*
-	 * r6  = &secondary_data
-	 */
-ENTRY(__secondary_switched)
-	ldr	sp, [r7, #4]			@ get secondary_data.stack
-	mov	fp, #0
-	b	secondary_start_kernel
-ENDPROC(__secondary_switched)
-
-	.type	__secondary_data, %object
-__secondary_data:
-	.long	.
-	.long	secondary_data
-	.long	__secondary_switched
-#endif /* defined(CONFIG_SMP) */
-
-
-
-/*
- * Setup common bits before finally enabling the MMU.  Essentially
- * this is just loading the page table pointer and domain access
- * registers.
- */
-__enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
-	orr	r0, r0, #CR_A
-#else
-	bic	r0, r0, #CR_A
-#endif
-#ifdef CONFIG_CPU_DCACHE_DISABLE
-	bic	r0, r0, #CR_C
-#endif
-#ifdef CONFIG_CPU_BPREDICT_DISABLE
-	bic	r0, r0, #CR_Z
-#endif
-#ifdef CONFIG_CPU_ICACHE_DISABLE
-	bic	r0, r0, #CR_I
-#endif
-	mov	r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
-		      domain_val(DOMAIN_IO, DOMAIN_CLIENT))
-	mcr	p15, 0, r5, c3, c0, 0		@ load domain access register
-	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
-	b	__turn_mmu_on
-ENDPROC(__enable_mmu)
-
-/*
- * Enable the MMU.  This completely changes the structure of the visible
- * memory space.  You will not be able to trace execution through this.
- * If you have an enquiry about this, *please* check the linux-arm-kernel
- * mailing list archives BEFORE sending another post to the list.
- *
- *  r0  = cp#15 control register
- *  r13 = *virtual* address to jump to upon completion
- *
- * other registers depend on the function called upon completion
- */
-	.align	5
-__turn_mmu_on:
-	mov	r0, r0
-	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
-	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
-	mov	r3, r3
-	mov	r3, r13
-	mov	pc, r3
-ENDPROC(__turn_mmu_on)
-
+	.ltorg
 
 /*
  * Setup the initial page tables.  We only setup the barest
@@ -213,7 +122,7 @@ ENDPROC(__turn_mmu_on)
  * r10 = procinfo
  *
  * Returns:
- *  r0, r3, r6, r7 corrupted
+ *  r0, r3, r5-r7 corrupted
  *  r4 = physical page table address
  */
 __create_page_tables:
@@ -235,20 +144,30 @@ __create_page_tables:
 	ldr	r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
 
 	/*
-	 * Create identity mapping for first MB of kernel to
-	 * cater for the MMU enable.  This identity mapping
-	 * will be removed by paging_init().  We use our current program
-	 * counter to determine corresponding section base address.
+	 * Create identity mapping to cater for __enable_mmu.
+	 * This identity mapping will be removed by paging_init().
 	 */
-	mov	r6, pc
-	mov	r6, r6, lsr #20			@ start of kernel section
-	orr	r3, r7, r6, lsl #20		@ flags + kernel base
-	str	r3, [r4, r6, lsl #2]		@ identity mapping
+	adr	r0, __enable_mmu_loc
+	ldmia	r0, {r3, r5, r6}
+	sub	r0, r0, r3			@ virt->phys offset
+	add	r5, r5, r0			@ phys __enable_mmu
+	add	r6, r6, r0			@ phys __enable_mmu_end
+	mov	r5, r5, lsr #20
+	mov	r6, r6, lsr #20
+
+1:	orr	r3, r7, r5, lsl #20		@ flags + kernel base
+	str	r3, [r4, r5, lsl #2]		@ identity mapping
+	teq	r5, r6
+	addne	r5, r5, #1			@ next section
+	bne	1b
 
 	/*
 	 * Now setup the pagetables for our kernel direct
 	 * mapped region.
 	 */
+	mov	r3, pc
+	mov	r3, r3, lsr #20
+	orr	r3, r7, r3, lsl #20
 	add	r0, r4,  #(KERNEL_START & 0xff000000) >> 18
 	str	r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]!
 	ldr	r6, =(KERNEL_END - 1)
@@ -289,24 +208,35 @@ __create_page_tables:
 	str	r6, [r0]
 
 #ifdef CONFIG_DEBUG_LL
-	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+#ifndef CONFIG_DEBUG_ICEDCC
 	/*
 	 * Map in IO space for serial debugging.
 	 * This allows debug messages to be output
 	 * via a serial console before paging_init.
 	 */
-	ldr	r3, [r8, #MACHINFO_PGOFFIO]
+	addruart r7, r3
+
+	mov	r3, r3, lsr #20
+	mov	r3, r3, lsl #2
+
 	add	r0, r4, r3
 	rsb	r3, r3, #0x4000			@ PTRS_PER_PGD*sizeof(long)
 	cmp	r3, #0x0800			@ limit to 512MB
 	movhi	r3, #0x0800
 	add	r6, r0, r3
-	ldr	r3, [r8, #MACHINFO_PHYSIO]
-	orr	r3, r3, r7
+	mov	r3, r7, lsr #20
+	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+	orr	r3, r7, r3, lsl #20
 1:	str	r3, [r0], #4
 	add	r3, r3, #1 << 20
 	teq	r0, r6
 	bne	1b
+
+#else /* CONFIG_DEBUG_ICEDCC */
+	/* we don't need any serial debugging mappings for ICEDCC */
+	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
+#endif /* !CONFIG_DEBUG_ICEDCC */
+
 #if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
 	/*
 	 * If we're using the NetWinder or CATS, we also need to map
@@ -332,5 +262,168 @@ __create_page_tables:
 	mov	pc, lr
 ENDPROC(__create_page_tables)
 	.ltorg
+__enable_mmu_loc:
+	.long	.
+	.long	__enable_mmu
+	.long	__enable_mmu_end
+
+#if defined(CONFIG_SMP)
+	__CPUINIT
+ENTRY(secondary_startup)
+	/*
+	 * Common entry point for secondary CPUs.
+	 *
+	 * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
+	 * the processor type - there is no need to check the machine type
+	 * as it has already been validated by the primary processor.
+	 */
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
+	mrc	p15, 0, r9, c0, c0		@ get processor id
+	bl	__lookup_processor_type
+	movs	r10, r5				@ invalid processor?
+	moveq	r0, #'p'			@ yes, error 'p'
+	beq	__error_p
+
+	/*
+	 * Use the page tables supplied from  __cpu_up.
+	 */
+	adr	r4, __secondary_data
+	ldmia	r4, {r5, r7, r12}		@ address to jump to after
+	sub	r4, r4, r5			@ mmu has been enabled
+	ldr	r4, [r7, r4]			@ get secondary_data.pgdir
+	adr	lr, BSYM(__enable_mmu)		@ return address
+	mov	r13, r12			@ __secondary_switched address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	) @ initialise processor
+						  @ (return control reg)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
+ENDPROC(secondary_startup)
+
+	/*
+	 * r6  = &secondary_data
+	 */
+ENTRY(__secondary_switched)
+	ldr	sp, [r7, #4]			@ get secondary_data.stack
+	mov	fp, #0
+	b	secondary_start_kernel
+ENDPROC(__secondary_switched)
+
+	.type	__secondary_data, %object
+__secondary_data:
+	.long	.
+	.long	secondary_data
+	.long	__secondary_switched
+#endif /* defined(CONFIG_SMP) */
+
+
+
+/*
+ * Setup common bits before finally enabling the MMU.  Essentially
+ * this is just loading the page table pointer and domain access
+ * registers.
+ *
+ *  r0  = cp#15 control register
+ *  r1  = machine ID
+ *  r2  = atags pointer
+ *  r4  = page table pointer
+ *  r9  = processor ID
+ *  r13 = *virtual* address to jump to upon completion
+ */
+__enable_mmu:
+#ifdef CONFIG_ALIGNMENT_TRAP
+	orr	r0, r0, #CR_A
+#else
+	bic	r0, r0, #CR_A
+#endif
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+	bic	r0, r0, #CR_C
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+	bic	r0, r0, #CR_Z
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+	bic	r0, r0, #CR_I
+#endif
+	mov	r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
+		      domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
+		      domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
+		      domain_val(DOMAIN_IO, DOMAIN_CLIENT))
+	mcr	p15, 0, r5, c3, c0, 0		@ load domain access register
+	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
+	b	__turn_mmu_on
+ENDPROC(__enable_mmu)
+
+/*
+ * Enable the MMU.  This completely changes the structure of the visible
+ * memory space.  You will not be able to trace execution through this.
+ * If you have an enquiry about this, *please* check the linux-arm-kernel
+ * mailing list archives BEFORE sending another post to the list.
+ *
+ *  r0  = cp#15 control register
+ *  r1  = machine ID
+ *  r2  = atags pointer
+ *  r9  = processor ID
+ *  r13 = *virtual* address to jump to upon completion
+ *
+ * other registers depend on the function called upon completion
+ */
+	.align	5
+__turn_mmu_on:
+	mov	r0, r0
+	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
+	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
+	mov	r3, r3
+	mov	r3, r13
+	mov	pc, r3
+__enable_mmu_end:
+ENDPROC(__turn_mmu_on)
+
+
+#ifdef CONFIG_SMP_ON_UP
+__fixup_smp:
+	mov	r7, #0x00070000
+	orr	r6, r7, #0xff000000	@ mask 0xff070000
+	orr	r7, r7, #0x41000000	@ val 0x41070000
+	and	r0, r9, r6
+	teq	r0, r7			@ ARM CPU and ARMv6/v7?
+	bne	__fixup_smp_on_up	@ no, assume UP
+
+	orr	r6, r6, #0x0000ff00
+	orr	r6, r6, #0x000000f0	@ mask 0xff07fff0
+	orr	r7, r7, #0x0000b000
+	orr	r7, r7, #0x00000020	@ val 0x4107b020
+	and	r0, r9, r6
+	teq	r0, r7			@ ARM 11MPCore?
+	moveq	pc, lr			@ yes, assume SMP
+
+	mrc	p15, 0, r0, c0, c0, 5	@ read MPIDR
+	tst	r0, #1 << 31
+	movne	pc, lr			@ bit 31 => SMP
+
+__fixup_smp_on_up:
+	adr	r0, 1f
+	ldmia	r0, {r3, r6, r7}
+	sub	r3, r0, r3
+	add	r6, r6, r3
+	add	r7, r7, r3
+2:	cmp	r6, r7
+	ldmia	r6!, {r0, r4}
+	strlo	r4, [r0, r3]
+	blo	2b
+	mov	pc, lr
+ENDPROC(__fixup_smp)
+
+1:	.word	.
+	.word	__smpalt_begin
+	.word	__smpalt_end
+
+	.pushsection .data
+	.globl	smp_on_up
+smp_on_up:
+	ALT_SMP(.long	1)
+	ALT_UP(.long	0)
+	.popsection
+
+#endif
 
 #include "head-common.S"
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
new file mode 100644
index 000000000000..54593b0c241b
--- /dev/null
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -0,0 +1,849 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2009, 2010 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers.
+ */
+#define pr_fmt(fmt) "hw-breakpoint: " fmt
+
+#include <linux/errno.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/current.h>
+#include <asm/hw_breakpoint.h>
+#include <asm/kdebug.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+
+/* Breakpoint currently in use for each BRP. */
+static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);
+
+/* Watchpoint currently in use for each WRP. */
+static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]);
+
+/* Number of BRP/WRP registers on this CPU. */
+static int core_num_brps;
+static int core_num_wrps;
+
+/* Debug architecture version. */
+static u8 debug_arch;
+
+/* Maximum supported watchpoint length. */
+static u8 max_watchpoint_len;
+
+/* Determine number of BRP registers available. */
+static int get_num_brps(void)
+{
+	u32 didr;
+	ARM_DBG_READ(c0, 0, didr);
+	return ((didr >> 24) & 0xf) + 1;
+}
+
+/* Determine number of WRP registers available. */
+static int get_num_wrps(void)
+{
+	/*
+	 * FIXME: When a watchpoint fires, the only way to work out which
+	 * watchpoint it was is by disassembling the faulting instruction
+	 * and working out the address of the memory access.
+	 *
+	 * Furthermore, we can only do this if the watchpoint was precise
+	 * since imprecise watchpoints prevent us from calculating register
+	 * based addresses.
+	 *
+	 * For the time being, we only report 1 watchpoint register so we
+	 * always know which watchpoint fired. In the future we can either
+	 * add a disassembler and address generation emulator, or we can
+	 * insert a check to see if the DFAR is set on watchpoint exception
+	 * entry [the ARM ARM states that the DFAR is UNKNOWN, but
+	 * experience shows that it is set on some implementations].
+	 */
+
+#if 0
+	u32 didr, wrps;
+	ARM_DBG_READ(c0, 0, didr);
+	return ((didr >> 28) & 0xf) + 1;
+#endif
+
+	return 1;
+}
+
+int hw_breakpoint_slots(int type)
+{
+	/*
+	 * We can be called early, so don't rely on
+	 * our static variables being initialised.
+	 */
+	switch (type) {
+	case TYPE_INST:
+		return get_num_brps();
+	case TYPE_DATA:
+		return get_num_wrps();
+	default:
+		pr_warning("unknown slot type: %d\n", type);
+		return 0;
+	}
+}
+
+/* Determine debug architecture. */
+static u8 get_debug_arch(void)
+{
+	u32 didr;
+
+	/* Do we implement the extended CPUID interface? */
+	if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
+		pr_warning("CPUID feature registers not supported. "
+				"Assuming v6 debug is present.\n");
+		return ARM_DEBUG_ARCH_V6;
+	}
+
+	ARM_DBG_READ(c0, 0, didr);
+	return (didr >> 16) & 0xf;
+}
+
+/* Does this core support mismatch breakpoints? */
+static int core_has_mismatch_bps(void)
+{
+	return debug_arch >= ARM_DEBUG_ARCH_V7_ECP14 && core_num_brps > 1;
+}
+
+u8 arch_get_debug_arch(void)
+{
+	return debug_arch;
+}
+
+#define READ_WB_REG_CASE(OP2, M, VAL)		\
+	case ((OP2 << 4) + M):			\
+		ARM_DBG_READ(c ## M, OP2, VAL); \
+		break
+
+#define WRITE_WB_REG_CASE(OP2, M, VAL)		\
+	case ((OP2 << 4) + M):			\
+		ARM_DBG_WRITE(c ## M, OP2, VAL);\
+		break
+
+#define GEN_READ_WB_REG_CASES(OP2, VAL)		\
+	READ_WB_REG_CASE(OP2, 0, VAL);		\
+	READ_WB_REG_CASE(OP2, 1, VAL);		\
+	READ_WB_REG_CASE(OP2, 2, VAL);		\
+	READ_WB_REG_CASE(OP2, 3, VAL);		\
+	READ_WB_REG_CASE(OP2, 4, VAL);		\
+	READ_WB_REG_CASE(OP2, 5, VAL);		\
+	READ_WB_REG_CASE(OP2, 6, VAL);		\
+	READ_WB_REG_CASE(OP2, 7, VAL);		\
+	READ_WB_REG_CASE(OP2, 8, VAL);		\
+	READ_WB_REG_CASE(OP2, 9, VAL);		\
+	READ_WB_REG_CASE(OP2, 10, VAL);		\
+	READ_WB_REG_CASE(OP2, 11, VAL);		\
+	READ_WB_REG_CASE(OP2, 12, VAL);		\
+	READ_WB_REG_CASE(OP2, 13, VAL);		\
+	READ_WB_REG_CASE(OP2, 14, VAL);		\
+	READ_WB_REG_CASE(OP2, 15, VAL)
+
+#define GEN_WRITE_WB_REG_CASES(OP2, VAL)	\
+	WRITE_WB_REG_CASE(OP2, 0, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 1, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 2, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 3, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 4, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 5, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 6, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 7, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 8, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 9, VAL);		\
+	WRITE_WB_REG_CASE(OP2, 10, VAL);	\
+	WRITE_WB_REG_CASE(OP2, 11, VAL);	\
+	WRITE_WB_REG_CASE(OP2, 12, VAL);	\
+	WRITE_WB_REG_CASE(OP2, 13, VAL);	\
+	WRITE_WB_REG_CASE(OP2, 14, VAL);	\
+	WRITE_WB_REG_CASE(OP2, 15, VAL)
+
+static u32 read_wb_reg(int n)
+{
+	u32 val = 0;
+
+	switch (n) {
+	GEN_READ_WB_REG_CASES(ARM_OP2_BVR, val);
+	GEN_READ_WB_REG_CASES(ARM_OP2_BCR, val);
+	GEN_READ_WB_REG_CASES(ARM_OP2_WVR, val);
+	GEN_READ_WB_REG_CASES(ARM_OP2_WCR, val);
+	default:
+		pr_warning("attempt to read from unknown breakpoint "
+				"register %d\n", n);
+	}
+
+	return val;
+}
+
+static void write_wb_reg(int n, u32 val)
+{
+	switch (n) {
+	GEN_WRITE_WB_REG_CASES(ARM_OP2_BVR, val);
+	GEN_WRITE_WB_REG_CASES(ARM_OP2_BCR, val);
+	GEN_WRITE_WB_REG_CASES(ARM_OP2_WVR, val);
+	GEN_WRITE_WB_REG_CASES(ARM_OP2_WCR, val);
+	default:
+		pr_warning("attempt to write to unknown breakpoint "
+				"register %d\n", n);
+	}
+	isb();
+}
+
+/*
+ * In order to access the breakpoint/watchpoint control registers,
+ * we must be running in debug monitor mode. Unfortunately, we can
+ * be put into halting debug mode at any time by an external debugger
+ * but there is nothing we can do to prevent that.
+ */
+static int enable_monitor_mode(void)
+{
+	u32 dscr;
+	int ret = 0;
+
+	ARM_DBG_READ(c1, 0, dscr);
+
+	/* Ensure that halting mode is disabled. */
+	if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN, "halting debug mode enabled."
+				"Unable to access hardware resources.")) {
+		ret = -EPERM;
+		goto out;
+	}
+
+	/* Write to the corresponding DSCR. */
+	switch (debug_arch) {
+	case ARM_DEBUG_ARCH_V6:
+	case ARM_DEBUG_ARCH_V6_1:
+		ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
+		break;
+	case ARM_DEBUG_ARCH_V7_ECP14:
+		ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN));
+		break;
+	default:
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* Check that the write made it through. */
+	ARM_DBG_READ(c1, 0, dscr);
+	if (WARN_ONCE(!(dscr & ARM_DSCR_MDBGEN),
+				"failed to enable monitor mode.")) {
+		ret = -EPERM;
+	}
+
+out:
+	return ret;
+}
+
+/*
+ * Check if 8-bit byte-address select is available.
+ * This clobbers WRP 0.
+ */
+static u8 get_max_wp_len(void)
+{
+	u32 ctrl_reg;
+	struct arch_hw_breakpoint_ctrl ctrl;
+	u8 size = 4;
+
+	if (debug_arch < ARM_DEBUG_ARCH_V7_ECP14)
+		goto out;
+
+	if (enable_monitor_mode())
+		goto out;
+
+	memset(&ctrl, 0, sizeof(ctrl));
+	ctrl.len = ARM_BREAKPOINT_LEN_8;
+	ctrl_reg = encode_ctrl_reg(ctrl);
+
+	write_wb_reg(ARM_BASE_WVR, 0);
+	write_wb_reg(ARM_BASE_WCR, ctrl_reg);
+	if ((read_wb_reg(ARM_BASE_WCR) & ctrl_reg) == ctrl_reg)
+		size = 8;
+
+out:
+	return size;
+}
+
+u8 arch_get_max_wp_len(void)
+{
+	return max_watchpoint_len;
+}
+
+/*
+ * Handler for reactivating a suspended watchpoint when the single
+ * step `mismatch' breakpoint is triggered.
+ */
+static void wp_single_step_handler(struct perf_event *bp, int unused,
+				   struct perf_sample_data *data,
+				   struct pt_regs *regs)
+{
+	perf_event_enable(counter_arch_bp(bp)->suspended_wp);
+	unregister_hw_breakpoint(bp);
+}
+
+static int bp_is_single_step(struct perf_event *bp)
+{
+	return bp->overflow_handler == wp_single_step_handler;
+}
+
+/*
+ * Install a perf counter breakpoint.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	struct perf_event **slot, **slots;
+	int i, max_slots, ctrl_base, val_base, ret = 0;
+
+	/* Ensure that we are in monitor mode and halting mode is disabled. */
+	ret = enable_monitor_mode();
+	if (ret)
+		goto out;
+
+	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
+		/* Breakpoint */
+		ctrl_base = ARM_BASE_BCR;
+		val_base = ARM_BASE_BVR;
+		slots = __get_cpu_var(bp_on_reg);
+		max_slots = core_num_brps - 1;
+
+		if (bp_is_single_step(bp)) {
+			info->ctrl.mismatch = 1;
+			i = max_slots;
+			slots[i] = bp;
+			goto setup;
+		}
+	} else {
+		/* Watchpoint */
+		ctrl_base = ARM_BASE_WCR;
+		val_base = ARM_BASE_WVR;
+		slots = __get_cpu_var(wp_on_reg);
+		max_slots = core_num_wrps;
+	}
+
+	for (i = 0; i < max_slots; ++i) {
+		slot = &slots[i];
+
+		if (!*slot) {
+			*slot = bp;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot")) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+setup:
+	/* Setup the address register. */
+	write_wb_reg(val_base + i, info->address);
+
+	/* Setup the control register. */
+	write_wb_reg(ctrl_base + i, encode_ctrl_reg(info->ctrl) | 0x1);
+
+out:
+	return ret;
+}
+
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	struct perf_event **slot, **slots;
+	int i, max_slots, base;
+
+	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
+		/* Breakpoint */
+		base = ARM_BASE_BCR;
+		slots = __get_cpu_var(bp_on_reg);
+		max_slots = core_num_brps - 1;
+
+		if (bp_is_single_step(bp)) {
+			i = max_slots;
+			slots[i] = NULL;
+			goto reset;
+		}
+	} else {
+		/* Watchpoint */
+		base = ARM_BASE_WCR;
+		slots = __get_cpu_var(wp_on_reg);
+		max_slots = core_num_wrps;
+	}
+
+	/* Remove the breakpoint. */
+	for (i = 0; i < max_slots; ++i) {
+		slot = &slots[i];
+
+		if (*slot == bp) {
+			*slot = NULL;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot"))
+		return;
+
+reset:
+	/* Reset the control register. */
+	write_wb_reg(base + i, 0);
+}
+
+static int get_hbp_len(u8 hbp_len)
+{
+	unsigned int len_in_bytes = 0;
+
+	switch (hbp_len) {
+	case ARM_BREAKPOINT_LEN_1:
+		len_in_bytes = 1;
+		break;
+	case ARM_BREAKPOINT_LEN_2:
+		len_in_bytes = 2;
+		break;
+	case ARM_BREAKPOINT_LEN_4:
+		len_in_bytes = 4;
+		break;
+	case ARM_BREAKPOINT_LEN_8:
+		len_in_bytes = 8;
+		break;
+	}
+
+	return len_in_bytes;
+}
+
+/*
+ * Check whether bp virtual address is in kernel space.
+ */
+int arch_check_bp_in_kernelspace(struct perf_event *bp)
+{
+	unsigned int len;
+	unsigned long va;
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	va = info->address;
+	len = get_hbp_len(info->ctrl.len);
+
+	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
+}
+
+/*
+ * Extract generic type and length encodings from an arch_hw_breakpoint_ctrl.
+ * Hopefully this will disappear when ptrace can bypass the conversion
+ * to generic breakpoint descriptions.
+ */
+int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
+			   int *gen_len, int *gen_type)
+{
+	/* Type */
+	switch (ctrl.type) {
+	case ARM_BREAKPOINT_EXECUTE:
+		*gen_type = HW_BREAKPOINT_X;
+		break;
+	case ARM_BREAKPOINT_LOAD:
+		*gen_type = HW_BREAKPOINT_R;
+		break;
+	case ARM_BREAKPOINT_STORE:
+		*gen_type = HW_BREAKPOINT_W;
+		break;
+	case ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE:
+		*gen_type = HW_BREAKPOINT_RW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Len */
+	switch (ctrl.len) {
+	case ARM_BREAKPOINT_LEN_1:
+		*gen_len = HW_BREAKPOINT_LEN_1;
+		break;
+	case ARM_BREAKPOINT_LEN_2:
+		*gen_len = HW_BREAKPOINT_LEN_2;
+		break;
+	case ARM_BREAKPOINT_LEN_4:
+		*gen_len = HW_BREAKPOINT_LEN_4;
+		break;
+	case ARM_BREAKPOINT_LEN_8:
+		*gen_len = HW_BREAKPOINT_LEN_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Construct an arch_hw_breakpoint from a perf_event.
+ */
+static int arch_build_bp_info(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	/* Type */
+	switch (bp->attr.bp_type) {
+	case HW_BREAKPOINT_X:
+		info->ctrl.type = ARM_BREAKPOINT_EXECUTE;
+		break;
+	case HW_BREAKPOINT_R:
+		info->ctrl.type = ARM_BREAKPOINT_LOAD;
+		break;
+	case HW_BREAKPOINT_W:
+		info->ctrl.type = ARM_BREAKPOINT_STORE;
+		break;
+	case HW_BREAKPOINT_RW:
+		info->ctrl.type = ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Len */
+	switch (bp->attr.bp_len) {
+	case HW_BREAKPOINT_LEN_1:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_1;
+		break;
+	case HW_BREAKPOINT_LEN_2:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_2;
+		break;
+	case HW_BREAKPOINT_LEN_4:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_4;
+		break;
+	case HW_BREAKPOINT_LEN_8:
+		info->ctrl.len = ARM_BREAKPOINT_LEN_8;
+		if ((info->ctrl.type != ARM_BREAKPOINT_EXECUTE)
+			&& max_watchpoint_len >= 8)
+			break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Address */
+	info->address = bp->attr.bp_addr;
+
+	/* Privilege */
+	info->ctrl.privilege = ARM_BREAKPOINT_USER;
+	if (arch_check_bp_in_kernelspace(bp) && !bp_is_single_step(bp))
+		info->ctrl.privilege |= ARM_BREAKPOINT_PRIV;
+
+	/* Enabled? */
+	info->ctrl.enabled = !bp->attr.disabled;
+
+	/* Mismatch */
+	info->ctrl.mismatch = 0;
+
+	return 0;
+}
+
+/*
+ * Validate the arch-specific HW Breakpoint register settings.
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	int ret = 0;
+	u32 bytelen, max_len, offset, alignment_mask = 0x3;
+
+	/* Build the arch_hw_breakpoint. */
+	ret = arch_build_bp_info(bp);
+	if (ret)
+		goto out;
+
+	/* Check address alignment. */
+	if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
+		alignment_mask = 0x7;
+	if (info->address & alignment_mask) {
+		/*
+		 * Try to fix the alignment. This may result in a length
+		 * that is too large, so we must check for that.
+		 */
+		bytelen = get_hbp_len(info->ctrl.len);
+		max_len = info->ctrl.type == ARM_BREAKPOINT_EXECUTE ? 4 :
+				max_watchpoint_len;
+
+		if (max_len >= 8)
+			offset = info->address & 0x7;
+		else
+			offset = info->address & 0x3;
+
+		if (bytelen > (1 << ((max_len - (offset + 1)) >> 1))) {
+			ret = -EFBIG;
+			goto out;
+		}
+
+		info->ctrl.len <<= offset;
+		info->address &= ~offset;
+
+		pr_debug("breakpoint alignment fixup: length = 0x%x, "
+			"address = 0x%x\n", info->ctrl.len, info->address);
+	}
+
+	/*
+	 * Currently we rely on an overflow handler to take
+	 * care of single-stepping the breakpoint when it fires.
+	 * In the case of userspace breakpoints on a core with V7 debug,
+	 * we can use the mismatch feature as a poor-man's hardware single-step.
+	 */
+	if (WARN_ONCE(!bp->overflow_handler &&
+		(arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_bps()),
+			"overflow handler required but none found")) {
+		ret = -EINVAL;
+		goto out;
+	}
+out:
+	return ret;
+}
+
+static void update_mismatch_flag(int idx, int flag)
+{
+	struct perf_event *bp = __get_cpu_var(bp_on_reg[idx]);
+	struct arch_hw_breakpoint *info;
+
+	if (bp == NULL)
+		return;
+
+	info = counter_arch_bp(bp);
+
+	/* Update the mismatch field to enter/exit `single-step' mode */
+	if (!bp->overflow_handler && info->ctrl.mismatch != flag) {
+		info->ctrl.mismatch = flag;
+		write_wb_reg(ARM_BASE_BCR + idx, encode_ctrl_reg(info->ctrl) | 0x1);
+	}
+}
+
+static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
+{
+	int i;
+	struct perf_event *bp, **slots = __get_cpu_var(wp_on_reg);
+	struct arch_hw_breakpoint *info;
+	struct perf_event_attr attr;
+
+	/* Without a disassembler, we can only handle 1 watchpoint. */
+	BUG_ON(core_num_wrps > 1);
+
+	hw_breakpoint_init(&attr);
+	attr.bp_addr	= regs->ARM_pc & ~0x3;
+	attr.bp_len	= HW_BREAKPOINT_LEN_4;
+	attr.bp_type	= HW_BREAKPOINT_X;
+
+	for (i = 0; i < core_num_wrps; ++i) {
+		rcu_read_lock();
+
+		if (slots[i] == NULL) {
+			rcu_read_unlock();
+			continue;
+		}
+
+		/*
+		 * The DFAR is an unknown value. Since we only allow a
+		 * single watchpoint, we can set the trigger to the lowest
+		 * possible faulting address.
+		 */
+		info = counter_arch_bp(slots[i]);
+		info->trigger = slots[i]->attr.bp_addr;
+		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
+		perf_bp_event(slots[i], regs);
+
+		/*
+		 * If no overflow handler is present, insert a temporary
+		 * mismatch breakpoint so we can single-step over the
+		 * watchpoint trigger.
+		 */
+		if (!slots[i]->overflow_handler) {
+			bp = register_user_hw_breakpoint(&attr,
+							 wp_single_step_handler,
+							 current);
+			counter_arch_bp(bp)->suspended_wp = slots[i];
+			perf_event_disable(slots[i]);
+		}
+
+		rcu_read_unlock();
+	}
+}
+
+static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
+{
+	int i;
+	int mismatch;
+	u32 ctrl_reg, val, addr;
+	struct perf_event *bp, **slots = __get_cpu_var(bp_on_reg);
+	struct arch_hw_breakpoint *info;
+	struct arch_hw_breakpoint_ctrl ctrl;
+
+	/* The exception entry code places the amended lr in the PC. */
+	addr = regs->ARM_pc;
+
+	for (i = 0; i < core_num_brps; ++i) {
+		rcu_read_lock();
+
+		bp = slots[i];
+
+		if (bp == NULL) {
+			rcu_read_unlock();
+			continue;
+		}
+
+		mismatch = 0;
+
+		/* Check if the breakpoint value matches. */
+		val = read_wb_reg(ARM_BASE_BVR + i);
+		if (val != (addr & ~0x3))
+			goto unlock;
+
+		/* Possible match, check the byte address select to confirm. */
+		ctrl_reg = read_wb_reg(ARM_BASE_BCR + i);
+		decode_ctrl_reg(ctrl_reg, &ctrl);
+		if ((1 << (addr & 0x3)) & ctrl.len) {
+			mismatch = 1;
+			info = counter_arch_bp(bp);
+			info->trigger = addr;
+		}
+
+unlock:
+		if ((mismatch && !info->ctrl.mismatch) || bp_is_single_step(bp)) {
+			pr_debug("breakpoint fired: address = 0x%x\n", addr);
+			perf_bp_event(bp, regs);
+		}
+
+		update_mismatch_flag(i, mismatch);
+		rcu_read_unlock();
+	}
+}
+
+/*
+ * Called from either the Data Abort Handler [watchpoint] or the
+ * Prefetch Abort Handler [breakpoint].
+ */
+static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
+				 struct pt_regs *regs)
+{
+	int ret = 1; /* Unhandled fault. */
+	u32 dscr;
+
+	/* We only handle watchpoints and hardware breakpoints. */
+	ARM_DBG_READ(c1, 0, dscr);
+
+	/* Perform perf callbacks. */
+	switch (ARM_DSCR_MOE(dscr)) {
+	case ARM_ENTRY_BREAKPOINT:
+		breakpoint_handler(addr, regs);
+		break;
+	case ARM_ENTRY_ASYNC_WATCHPOINT:
+		WARN_ON("Asynchronous watchpoint exception taken. "
+			"Debugging results may be unreliable");
+	case ARM_ENTRY_SYNC_WATCHPOINT:
+		watchpoint_handler(addr, regs);
+		break;
+	default:
+		goto out;
+	}
+
+	ret = 0;
+out:
+	return ret;
+}
+
+/*
+ * One-time initialisation.
+ */
+static void __init reset_ctrl_regs(void *unused)
+{
+	int i;
+
+	if (enable_monitor_mode())
+		return;
+
+	for (i = 0; i < core_num_brps; ++i) {
+		write_wb_reg(ARM_BASE_BCR + i, 0UL);
+		write_wb_reg(ARM_BASE_BVR + i, 0UL);
+	}
+
+	for (i = 0; i < core_num_wrps; ++i) {
+		write_wb_reg(ARM_BASE_WCR + i, 0UL);
+		write_wb_reg(ARM_BASE_WVR + i, 0UL);
+	}
+}
+
+static int __init arch_hw_breakpoint_init(void)
+{
+	int ret = 0;
+	u32 dscr;
+
+	debug_arch = get_debug_arch();
+
+	if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) {
+		pr_info("debug architecture 0x%x unsupported.\n", debug_arch);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* Determine how many BRPs/WRPs are available. */
+	core_num_brps = get_num_brps();
+	core_num_wrps = get_num_wrps();
+
+	pr_info("found %d breakpoint and %d watchpoint registers.\n",
+			core_num_brps, core_num_wrps);
+
+	if (core_has_mismatch_bps())
+		pr_info("1 breakpoint reserved for watchpoint single-step.\n");
+
+	ARM_DBG_READ(c1, 0, dscr);
+	if (dscr & ARM_DSCR_HDBGEN) {
+		pr_warning("halting debug mode enabled. Assuming maximum "
+				"watchpoint size of 4 bytes.");
+	} else {
+		/* Work out the maximum supported watchpoint length. */
+		max_watchpoint_len = get_max_wp_len();
+		pr_info("maximum watchpoint size is %u bytes.\n",
+				max_watchpoint_len);
+
+		/*
+		 * Reset the breakpoint resources. We assume that a halting
+		 * debugger will leave the world in a nice state for us.
+		 */
+		smp_call_function(reset_ctrl_regs, NULL, 1);
+		reset_ctrl_regs(NULL);
+	}
+
+	/* Register debug fault handler. */
+	hook_fault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
+			"watchpoint debug exception");
+	hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
+			"breakpoint debug exception");
+
+out:
+	return ret;
+}
+arch_initcall(arch_hw_breakpoint_init);
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+}
+
+/*
+ * Dummy function to register with die_notifier.
+ */
+int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+					unsigned long val, void *data)
+{
+	return NOTIFY_DONE;
+}
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 3b3d2c80509c..36ad3be4692a 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -47,12 +47,14 @@
 #define irq_finish(irq) do { } while (0)
 #endif
 
+unsigned int arch_nr_irqs;
 void (*init_arch_irq)(void) __initdata = NULL;
 unsigned long irq_err_count;
 
 int show_interrupts(struct seq_file *p, void *v)
 {
 	int i = *(loff_t *) v, cpu;
+	struct irq_desc *desc;
 	struct irqaction * action;
 	unsigned long flags;
 
@@ -67,24 +69,25 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_putc(p, '\n');
 	}
 
-	if (i < NR_IRQS) {
-		raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
-		action = irq_desc[i].action;
+	if (i < nr_irqs) {
+		desc = irq_to_desc(i);
+		raw_spin_lock_irqsave(&desc->lock, flags);
+		action = desc->action;
 		if (!action)
 			goto unlock;
 
 		seq_printf(p, "%3d: ", i);
 		for_each_present_cpu(cpu)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
-		seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
+		seq_printf(p, " %10s", desc->chip->name ? : "-");
 		seq_printf(p, "  %s", action->name);
 		for (action = action->next; action; action = action->next)
 			seq_printf(p, ", %s", action->name);
 
 		seq_putc(p, '\n');
 unlock:
-		raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
+		raw_spin_unlock_irqrestore(&desc->lock, flags);
+	} else if (i == nr_irqs) {
 #ifdef CONFIG_FIQ
 		show_fiq_list(p, v);
 #endif
@@ -112,7 +115,7 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (unlikely(irq >= NR_IRQS)) {
+	if (unlikely(irq >= nr_irqs)) {
 		if (printk_ratelimit())
 			printk(KERN_WARNING "Bad IRQ%u\n", irq);
 		ack_bad_irq(irq);
@@ -132,12 +135,12 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 	struct irq_desc *desc;
 	unsigned long flags;
 
-	if (irq >= NR_IRQS) {
+	if (irq >= nr_irqs) {
 		printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq);
 		return;
 	}
 
-	desc = irq_desc + irq;
+	desc = irq_to_desc(irq);
 	raw_spin_lock_irqsave(&desc->lock, flags);
 	desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
 	if (iflags & IRQF_VALID)
@@ -151,14 +154,17 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 
 void __init init_IRQ(void)
 {
-	int irq;
-
-	for (irq = 0; irq < NR_IRQS; irq++)
-		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
-
 	init_arch_irq();
 }
 
+#ifdef CONFIG_SPARSE_IRQ
+int __init arch_probe_nr_irqs(void)
+{
+	nr_irqs = arch_nr_irqs ? arch_nr_irqs : NR_IRQS;
+	return nr_irqs;
+}
+#endif
+
 #ifdef CONFIG_HOTPLUG_CPU
 
 static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
@@ -178,10 +184,9 @@ static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
 void migrate_irqs(void)
 {
 	unsigned int i, cpu = smp_processor_id();
+	struct irq_desc *desc;
 
-	for (i = 0; i < NR_IRQS; i++) {
-		struct irq_desc *desc = irq_desc + i;
-
+	for_each_irq_desc(i, desc) {
 		if (desc->node == cpu) {
 			unsigned int newcpu = cpumask_any_and(desc->affinity,
 							      cpu_online_mask);
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index c868a8864117..778c2f7024ff 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -10,57 +10,62 @@
  *           Deepak Saxena <dsaxena@plexity.net>
  */
 #include <linux/irq.h>
+#include <linux/kdebug.h>
 #include <linux/kgdb.h>
 #include <asm/traps.h>
 
-/* Make a local copy of the registers passed into the handler (bletch) */
-void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] =
 {
-	int regno;
-
-	/* Initialize all to zero. */
-	for (regno = 0; regno < GDB_MAX_REGS; regno++)
-		gdb_regs[regno] = 0;
+	{ "r0", 4, offsetof(struct pt_regs, ARM_r0)},
+	{ "r1", 4, offsetof(struct pt_regs, ARM_r1)},
+	{ "r2", 4, offsetof(struct pt_regs, ARM_r2)},
+	{ "r3", 4, offsetof(struct pt_regs, ARM_r3)},
+	{ "r4", 4, offsetof(struct pt_regs, ARM_r4)},
+	{ "r5", 4, offsetof(struct pt_regs, ARM_r5)},
+	{ "r6", 4, offsetof(struct pt_regs, ARM_r6)},
+	{ "r7", 4, offsetof(struct pt_regs, ARM_r7)},
+	{ "r8", 4, offsetof(struct pt_regs, ARM_r8)},
+	{ "r9", 4, offsetof(struct pt_regs, ARM_r9)},
+	{ "r10", 4, offsetof(struct pt_regs, ARM_r10)},
+	{ "fp", 4, offsetof(struct pt_regs, ARM_fp)},
+	{ "ip", 4, offsetof(struct pt_regs, ARM_ip)},
+	{ "sp", 4, offsetof(struct pt_regs, ARM_sp)},
+	{ "lr", 4, offsetof(struct pt_regs, ARM_lr)},
+	{ "pc", 4, offsetof(struct pt_regs, ARM_pc)},
+	{ "f0", 12, -1 },
+	{ "f1", 12, -1 },
+	{ "f2", 12, -1 },
+	{ "f3", 12, -1 },
+	{ "f4", 12, -1 },
+	{ "f5", 12, -1 },
+	{ "f6", 12, -1 },
+	{ "f7", 12, -1 },
+	{ "fps", 4, -1 },
+	{ "cpsr", 4, offsetof(struct pt_regs, ARM_cpsr)},
+};
 
-	gdb_regs[_R0]		= kernel_regs->ARM_r0;
-	gdb_regs[_R1]		= kernel_regs->ARM_r1;
-	gdb_regs[_R2]		= kernel_regs->ARM_r2;
-	gdb_regs[_R3]		= kernel_regs->ARM_r3;
-	gdb_regs[_R4]		= kernel_regs->ARM_r4;
-	gdb_regs[_R5]		= kernel_regs->ARM_r5;
-	gdb_regs[_R6]		= kernel_regs->ARM_r6;
-	gdb_regs[_R7]		= kernel_regs->ARM_r7;
-	gdb_regs[_R8]		= kernel_regs->ARM_r8;
-	gdb_regs[_R9]		= kernel_regs->ARM_r9;
-	gdb_regs[_R10]		= kernel_regs->ARM_r10;
-	gdb_regs[_FP]		= kernel_regs->ARM_fp;
-	gdb_regs[_IP]		= kernel_regs->ARM_ip;
-	gdb_regs[_SPT]		= kernel_regs->ARM_sp;
-	gdb_regs[_LR]		= kernel_regs->ARM_lr;
-	gdb_regs[_PC]		= kernel_regs->ARM_pc;
-	gdb_regs[_CPSR]		= kernel_regs->ARM_cpsr;
+char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return NULL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
+		       dbg_reg_def[regno].size);
+	else
+		memset(mem, 0, dbg_reg_def[regno].size);
+	return dbg_reg_def[regno].name;
 }
 
-/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
-void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
 {
-	kernel_regs->ARM_r0	= gdb_regs[_R0];
-	kernel_regs->ARM_r1	= gdb_regs[_R1];
-	kernel_regs->ARM_r2	= gdb_regs[_R2];
-	kernel_regs->ARM_r3	= gdb_regs[_R3];
-	kernel_regs->ARM_r4	= gdb_regs[_R4];
-	kernel_regs->ARM_r5	= gdb_regs[_R5];
-	kernel_regs->ARM_r6	= gdb_regs[_R6];
-	kernel_regs->ARM_r7	= gdb_regs[_R7];
-	kernel_regs->ARM_r8	= gdb_regs[_R8];
-	kernel_regs->ARM_r9	= gdb_regs[_R9];
-	kernel_regs->ARM_r10	= gdb_regs[_R10];
-	kernel_regs->ARM_fp	= gdb_regs[_FP];
-	kernel_regs->ARM_ip	= gdb_regs[_IP];
-	kernel_regs->ARM_sp	= gdb_regs[_SPT];
-	kernel_regs->ARM_lr	= gdb_regs[_LR];
-	kernel_regs->ARM_pc	= gdb_regs[_PC];
-	kernel_regs->ARM_cpsr	= gdb_regs[_CPSR];
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return -EINVAL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
+		       dbg_reg_def[regno].size);
+	return 0;
 }
 
 void
@@ -176,6 +181,33 @@ void kgdb_roundup_cpus(unsigned long flags)
        local_irq_disable();
 }
 
+static int __kgdb_notify(struct die_args *args, unsigned long cmd)
+{
+	struct pt_regs *regs = args->regs;
+
+	if (kgdb_handle_exception(1, args->signr, cmd, regs))
+		return NOTIFY_DONE;
+	return NOTIFY_STOP;
+}
+static int
+kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+	ret = __kgdb_notify(ptr, cmd);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call	= kgdb_notify,
+	.priority	= -INT_MAX,
+};
+
+
 /**
  *	kgdb_arch_init - Perform any architecture specific initalization.
  *
@@ -184,6 +216,11 @@ void kgdb_roundup_cpus(unsigned long flags)
  */
 int kgdb_arch_init(void)
 {
+	int ret = register_die_notifier(&kgdb_notifier);
+
+	if (ret != 0)
+		return ret;
+
 	register_undef_hook(&kgdb_brkpt_hook);
 	register_undef_hook(&kgdb_compiled_brkpt_hook);
 
@@ -200,6 +237,7 @@ void kgdb_arch_exit(void)
 {
 	unregister_undef_hook(&kgdb_brkpt_hook);
 	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+	unregister_die_notifier(&kgdb_notifier);
 }
 
 /*
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
index 8bccbfa693ff..2c1f0050c9c4 100644
--- a/arch/arm/kernel/kprobes-decode.c
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -1162,11 +1162,12 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 {
 	/*
 	 * MSR   : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
-	 * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx
+	 * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx
 	 * ALU op with S bit and Rd == 15 :
 	 *	   cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
 	 */
-	if ((insn & 0x0f900000) == 0x03200000 ||	/* MSR & Undef */
+	if ((insn & 0x0fb00000) == 0x03200000 ||	/* MSR */
+	    (insn & 0x0ff00000) == 0x03400000 ||	/* Undef */
 	    (insn & 0x0e10f000) == 0x0210f000)		/* ALU s-bit, R15  */
 		return INSN_REJECTED;
 
@@ -1177,7 +1178,7 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	 * *S (bit 20) updates condition codes
 	 * ADC/SBC/RSC reads the C flag
 	 */
-	insn &= 0xfff00fff;	/* Rn = r0, Rd = r0 */
+	insn &= 0xffff0fff;	/* Rd = r0 */
 	asi->insn[0] = insn;
 	asi->insn_handler = (insn & (1 << 20)) ?  /* S-bit */
 			emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 598ca61e7bca..3a8fd5140d7a 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -37,12 +37,12 @@ void machine_kexec_cleanup(struct kimage *image)
 {
 }
 
-void machine_shutdown(void)
-{
-}
-
 void machine_crash_shutdown(struct pt_regs *regs)
 {
+	local_irq_disable();
+	crash_save_cpu(regs, smp_processor_id());
+
+	printk(KERN_INFO "Loading crashdump kernel...\n");
 }
 
 void machine_kexec(struct kimage *image)
@@ -74,7 +74,14 @@ void machine_kexec(struct kimage *image)
 			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
-	cpu_proc_fin();
+	local_irq_disable();
+	local_fiq_disable();
 	setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
+	flush_cache_all();
+	outer_flush_all();
+	outer_disable();
+	cpu_proc_fin();
+	outer_inv_all();
+	flush_cache_all();
 	cpu_reset(reboot_code_buffer_phys);
 }
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index c628bdf6c430..d9bd786ce23d 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -69,20 +69,31 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
 {
 #ifdef CONFIG_ARM_UNWIND
 	Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+	struct arm_unwind_mapping *maps = mod->arch.map;
 
 	for (s = sechdrs; s < sechdrs_end; s++) {
-		if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0)
-			mod->arch.unw_sec_init = s;
-		else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0)
-			mod->arch.unw_sec_devinit = s;
-		else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0)
-			mod->arch.unw_sec_core = s;
-		else if (strcmp(".init.text", secstrings + s->sh_name) == 0)
-			mod->arch.sec_init_text = s;
-		else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0)
-			mod->arch.sec_devinit_text = s;
-		else if (strcmp(".text", secstrings + s->sh_name) == 0)
-			mod->arch.sec_core_text = s;
+		char const *secname = secstrings + s->sh_name;
+
+		if (strcmp(".ARM.exidx.init.text", secname) == 0)
+			maps[ARM_SEC_INIT].unw_sec = s;
+		else if (strcmp(".ARM.exidx.devinit.text", secname) == 0)
+			maps[ARM_SEC_DEVINIT].unw_sec = s;
+		else if (strcmp(".ARM.exidx", secname) == 0)
+			maps[ARM_SEC_CORE].unw_sec = s;
+		else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
+			maps[ARM_SEC_EXIT].unw_sec = s;
+		else if (strcmp(".ARM.exidx.devexit.text", secname) == 0)
+			maps[ARM_SEC_DEVEXIT].unw_sec = s;
+		else if (strcmp(".init.text", secname) == 0)
+			maps[ARM_SEC_INIT].sec_text = s;
+		else if (strcmp(".devinit.text", secname) == 0)
+			maps[ARM_SEC_DEVINIT].sec_text = s;
+		else if (strcmp(".text", secname) == 0)
+			maps[ARM_SEC_CORE].sec_text = s;
+		else if (strcmp(".exit.text", secname) == 0)
+			maps[ARM_SEC_EXIT].sec_text = s;
+		else if (strcmp(".devexit.text", secname) == 0)
+			maps[ARM_SEC_DEVEXIT].sec_text = s;
 	}
 #endif
 	return 0;
@@ -102,7 +113,9 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		unsigned long loc;
 		Elf32_Sym *sym;
 		s32 offset;
+#ifdef CONFIG_THUMB2_KERNEL
 		u32 upper, lower, sign, j1, j2;
+#endif
 
 		offset = ELF32_R_SYM(rel->r_info);
 		if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
@@ -185,6 +198,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 					(offset & 0x0fff);
 			break;
 
+#ifdef CONFIG_THUMB2_KERNEL
 		case R_ARM_THM_CALL:
 		case R_ARM_THM_JUMP24:
 			upper = *(u16 *)loc;
@@ -233,9 +247,40 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
 						  (j1 << 13) | (j2 << 11) |
 						  ((offset >> 1) & 0x07ff));
+			break;
+
+		case R_ARM_THM_MOVW_ABS_NC:
+		case R_ARM_THM_MOVT_ABS:
 			upper = *(u16 *)loc;
 			lower = *(u16 *)(loc + 2);
+
+			/*
+			 * MOVT/MOVW instructions encoding in Thumb-2:
+			 *
+			 * i	= upper[10]
+			 * imm4	= upper[3:0]
+			 * imm3	= lower[14:12]
+			 * imm8	= lower[7:0]
+			 *
+			 * imm16 = imm4:i:imm3:imm8
+			 */
+			offset = ((upper & 0x000f) << 12) |
+				((upper & 0x0400) << 1) |
+				((lower & 0x7000) >> 4) | (lower & 0x00ff);
+			offset = (offset ^ 0x8000) - 0x8000;
+			offset += sym->st_value;
+
+			if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS)
+				offset >>= 16;
+
+			*(u16 *)loc = (u16)((upper & 0xfbf0) |
+					    ((offset & 0xf000) >> 12) |
+					    ((offset & 0x0800) >> 1));
+			*(u16 *)(loc + 2) = (u16)((lower & 0x8f00) |
+						  ((offset & 0x0700) << 4) |
+						  (offset & 0x00ff));
 			break;
+#endif
 
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
@@ -258,31 +303,22 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 #ifdef CONFIG_ARM_UNWIND
 static void register_unwind_tables(struct module *mod)
 {
-	if (mod->arch.unw_sec_init && mod->arch.sec_init_text)
-		mod->arch.unwind_init =
-			unwind_table_add(mod->arch.unw_sec_init->sh_addr,
-					 mod->arch.unw_sec_init->sh_size,
-					 mod->arch.sec_init_text->sh_addr,
-					 mod->arch.sec_init_text->sh_size);
-	if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text)
-		mod->arch.unwind_devinit =
-			unwind_table_add(mod->arch.unw_sec_devinit->sh_addr,
-					 mod->arch.unw_sec_devinit->sh_size,
-					 mod->arch.sec_devinit_text->sh_addr,
-					 mod->arch.sec_devinit_text->sh_size);
-	if (mod->arch.unw_sec_core && mod->arch.sec_core_text)
-		mod->arch.unwind_core =
-			unwind_table_add(mod->arch.unw_sec_core->sh_addr,
-					 mod->arch.unw_sec_core->sh_size,
-					 mod->arch.sec_core_text->sh_addr,
-					 mod->arch.sec_core_text->sh_size);
+	int i;
+	for (i = 0; i < ARM_SEC_MAX; ++i) {
+		struct arm_unwind_mapping *map = &mod->arch.map[i];
+		if (map->unw_sec && map->sec_text)
+			map->unwind = unwind_table_add(map->unw_sec->sh_addr,
+						       map->unw_sec->sh_size,
+						       map->sec_text->sh_addr,
+						       map->sec_text->sh_size);
+	}
 }
 
 static void unregister_unwind_tables(struct module *mod)
 {
-	unwind_table_del(mod->arch.unwind_init);
-	unwind_table_del(mod->arch.unwind_devinit);
-	unwind_table_del(mod->arch.unwind_core);
+	int i = ARM_SEC_MAX;
+	while (--i >= 0)
+		unwind_table_del(mod->arch.map[i].unwind);
 }
 #else
 static inline void register_unwind_tables(struct module *mod) { }
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index de12536d687f..49643b1467e6 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -123,6 +123,12 @@ armpmu_get_max_events(void)
 }
 EXPORT_SYMBOL_GPL(armpmu_get_max_events);
 
+int perf_num_counters(void)
+{
+	return armpmu_get_max_events();
+}
+EXPORT_SYMBOL_GPL(perf_num_counters);
+
 #define HW_OP_UNSUPPORTED		0xFFFF
 
 #define C(_x) \
@@ -164,20 +170,20 @@ armpmu_event_set_period(struct perf_event *event,
 			struct hw_perf_event *hwc,
 			int idx)
 {
-	s64 left = atomic64_read(&hwc->period_left);
+	s64 left = local64_read(&hwc->period_left);
 	s64 period = hwc->sample_period;
 	int ret = 0;
 
 	if (unlikely(left <= -period)) {
 		left = period;
-		atomic64_set(&hwc->period_left, left);
+		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		ret = 1;
 	}
 
 	if (unlikely(left <= 0)) {
 		left += period;
-		atomic64_set(&hwc->period_left, left);
+		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		ret = 1;
 	}
@@ -185,7 +191,7 @@ armpmu_event_set_period(struct perf_event *event,
 	if (left > (s64)armpmu->max_period)
 		left = armpmu->max_period;
 
-	atomic64_set(&hwc->prev_count, (u64)-left);
+	local64_set(&hwc->prev_count, (u64)-left);
 
 	armpmu->write_counter(idx, (u64)(-left) & 0xffffffff);
 
@@ -204,63 +210,73 @@ armpmu_event_update(struct perf_event *event,
 	u64 delta;
 
 again:
-	prev_raw_count = atomic64_read(&hwc->prev_count);
+	prev_raw_count = local64_read(&hwc->prev_count);
 	new_raw_count = armpmu->read_counter(idx);
 
-	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
 	delta = (new_raw_count << shift) - (prev_raw_count << shift);
 	delta >>= shift;
 
-	atomic64_add(delta, &event->count);
-	atomic64_sub(delta, &hwc->period_left);
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
 
 	return new_raw_count;
 }
 
 static void
-armpmu_disable(struct perf_event *event)
+armpmu_read(struct perf_event *event)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	WARN_ON(idx < 0);
-
-	clear_bit(idx, cpuc->active_mask);
-	armpmu->disable(hwc, idx);
-
-	barrier();
 
-	armpmu_event_update(event, hwc, idx);
-	cpuc->events[idx] = NULL;
-	clear_bit(idx, cpuc->used_mask);
+	/* Don't read disabled counters! */
+	if (hwc->idx < 0)
+		return;
 
-	perf_event_update_userpage(event);
+	armpmu_event_update(event, hwc, hwc->idx);
 }
 
 static void
-armpmu_read(struct perf_event *event)
+armpmu_stop(struct perf_event *event, int flags)
 {
 	struct hw_perf_event *hwc = &event->hw;
 
-	/* Don't read disabled counters! */
-	if (hwc->idx < 0)
+	if (!armpmu)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx);
+	/*
+	 * ARM pmu always has to update the counter, so ignore
+	 * PERF_EF_UPDATE, see comments in armpmu_start().
+	 */
+	if (!(hwc->state & PERF_HES_STOPPED)) {
+		armpmu->disable(hwc, hwc->idx);
+		barrier(); /* why? */
+		armpmu_event_update(event, hwc, hwc->idx);
+		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+	}
 }
 
 static void
-armpmu_unthrottle(struct perf_event *event)
+armpmu_start(struct perf_event *event, int flags)
 {
 	struct hw_perf_event *hwc = &event->hw;
 
+	if (!armpmu)
+		return;
+
+	/*
+	 * ARM pmu always has to reprogram the period, so ignore
+	 * PERF_EF_RELOAD, see the comment below.
+	 */
+	if (flags & PERF_EF_RELOAD)
+		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+
+	hwc->state = 0;
 	/*
 	 * Set the period again. Some counters can't be stopped, so when we
-	 * were throttled we simply disabled the IRQ source and the counter
+	 * were stopped we simply disabled the IRQ source and the counter
 	 * may have been left counting. If we don't do this step then we may
 	 * get an interrupt too soon or *way* too late if the overflow has
 	 * happened since disabling.
@@ -269,14 +285,33 @@ armpmu_unthrottle(struct perf_event *event)
 	armpmu->enable(hwc, hwc->idx);
 }
 
+static void
+armpmu_del(struct perf_event *event, int flags)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx = hwc->idx;
+
+	WARN_ON(idx < 0);
+
+	clear_bit(idx, cpuc->active_mask);
+	armpmu_stop(event, PERF_EF_UPDATE);
+	cpuc->events[idx] = NULL;
+	clear_bit(idx, cpuc->used_mask);
+
+	perf_event_update_userpage(event);
+}
+
 static int
-armpmu_enable(struct perf_event *event)
+armpmu_add(struct perf_event *event, int flags)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
 	int idx;
 	int err = 0;
 
+	perf_pmu_disable(event->pmu);
+
 	/* If we don't have a space for the counter then finish early. */
 	idx = armpmu->get_event_idx(cpuc, hwc);
 	if (idx < 0) {
@@ -293,25 +328,19 @@ armpmu_enable(struct perf_event *event)
 	cpuc->events[idx] = event;
 	set_bit(idx, cpuc->active_mask);
 
-	/* Set the period for the event. */
-	armpmu_event_set_period(event, hwc, idx);
-
-	/* Enable the event. */
-	armpmu->enable(hwc, idx);
+	hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+	if (flags & PERF_EF_START)
+		armpmu_start(event, PERF_EF_RELOAD);
 
 	/* Propagate our changes to the userspace mapping. */
 	perf_event_update_userpage(event);
 
 out:
+	perf_pmu_enable(event->pmu);
 	return err;
 }
 
-static struct pmu pmu = {
-	.enable	    = armpmu_enable,
-	.disable    = armpmu_disable,
-	.unthrottle = armpmu_unthrottle,
-	.read	    = armpmu_read,
-};
+static struct pmu pmu;
 
 static int
 validate_event(struct cpu_hw_events *cpuc,
@@ -319,8 +348,8 @@ validate_event(struct cpu_hw_events *cpuc,
 {
 	struct hw_perf_event fake_event = event->hw;
 
-	if (event->pmu && event->pmu != &pmu)
-		return 0;
+	if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+		return 1;
 
 	return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
 }
@@ -478,7 +507,7 @@ __hw_perf_event_init(struct perf_event *event)
 	if (!hwc->sample_period) {
 		hwc->sample_period  = armpmu->max_period;
 		hwc->last_period    = hwc->sample_period;
-		atomic64_set(&hwc->period_left, hwc->sample_period);
+		local64_set(&hwc->period_left, hwc->sample_period);
 	}
 
 	err = 0;
@@ -491,20 +520,29 @@ __hw_perf_event_init(struct perf_event *event)
 	return err;
 }
 
-const struct pmu *
-hw_perf_event_init(struct perf_event *event)
+static int armpmu_event_init(struct perf_event *event)
 {
 	int err = 0;
 
+	switch (event->attr.type) {
+	case PERF_TYPE_RAW:
+	case PERF_TYPE_HARDWARE:
+	case PERF_TYPE_HW_CACHE:
+		break;
+
+	default:
+		return -ENOENT;
+	}
+
 	if (!armpmu)
-		return ERR_PTR(-ENODEV);
+		return -ENODEV;
 
 	event->destroy = hw_perf_event_destroy;
 
 	if (!atomic_inc_not_zero(&active_events)) {
-		if (atomic_read(&active_events) > perf_max_events) {
+		if (atomic_read(&active_events) > armpmu->num_events) {
 			atomic_dec(&active_events);
-			return ERR_PTR(-ENOSPC);
+			return -ENOSPC;
 		}
 
 		mutex_lock(&pmu_reserve_mutex);
@@ -518,17 +556,16 @@ hw_perf_event_init(struct perf_event *event)
 	}
 
 	if (err)
-		return ERR_PTR(err);
+		return err;
 
 	err = __hw_perf_event_init(event);
 	if (err)
 		hw_perf_event_destroy(event);
 
-	return err ? ERR_PTR(err) : &pmu;
+	return err;
 }
 
-void
-hw_perf_enable(void)
+static void armpmu_enable(struct pmu *pmu)
 {
 	/* Enable all of the perf events on hardware. */
 	int idx;
@@ -549,13 +586,23 @@ hw_perf_enable(void)
 	armpmu->start();
 }
 
-void
-hw_perf_disable(void)
+static void armpmu_disable(struct pmu *pmu)
 {
 	if (armpmu)
 		armpmu->stop();
 }
 
+static struct pmu pmu = {
+	.pmu_enable	= armpmu_enable,
+	.pmu_disable	= armpmu_disable,
+	.event_init	= armpmu_event_init,
+	.add		= armpmu_add,
+	.del		= armpmu_del,
+	.start		= armpmu_start,
+	.stop		= armpmu_stop,
+	.read		= armpmu_read,
+};
+
 /*
  * ARMv6 Performance counter handling code.
  *
@@ -1041,11 +1088,11 @@ armv6pmu_handle_irq(int irq_num,
 	/*
 	 * Handle the pending perf events.
 	 *
-	 * Note: this call *must* be run with interrupts enabled. For
-	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * Note: this call *must* be run with interrupts disabled. For
+	 * platforms that can have the PMU interrupts raised as an NMI, this
 	 * will not work.
 	 */
-	perf_event_do_pending();
+	irq_work_run();
 
 	return IRQ_HANDLED;
 }
@@ -2017,11 +2064,11 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 	/*
 	 * Handle the pending perf events.
 	 *
-	 * Note: this call *must* be run with interrupts enabled. For
-	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * Note: this call *must* be run with interrupts disabled. For
+	 * platforms that can have the PMU interrupts raised as an NMI, this
 	 * will not work.
 	 */
-	perf_event_do_pending();
+	irq_work_run();
 
 	return IRQ_HANDLED;
 }
@@ -2389,7 +2436,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 			armpmu->disable(hwc, idx);
 	}
 
-	perf_event_do_pending();
+	irq_work_run();
 
 	/*
 	 * Re-enable the PMU.
@@ -2716,7 +2763,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 			armpmu->disable(hwc, idx);
 	}
 
-	perf_event_do_pending();
+	irq_work_run();
 
 	/*
 	 * Re-enable the PMU.
@@ -2933,14 +2980,12 @@ init_hw_perf_events(void)
 			armpmu = &armv6pmu;
 			memcpy(armpmu_perf_cache_map, armv6_perf_cache_map,
 					sizeof(armv6_perf_cache_map));
-			perf_max_events	= armv6pmu.num_events;
 			break;
 		case 0xB020:	/* ARM11mpcore */
 			armpmu = &armv6mpcore_pmu;
 			memcpy(armpmu_perf_cache_map,
 			       armv6mpcore_perf_cache_map,
 			       sizeof(armv6mpcore_perf_cache_map));
-			perf_max_events = armv6mpcore_pmu.num_events;
 			break;
 		case 0xC080:	/* Cortex-A8 */
 			armv7pmu.id = ARM_PERF_PMU_ID_CA8;
@@ -2952,7 +2997,6 @@ init_hw_perf_events(void)
 			/* Reset PMNC and read the nb of CNTx counters
 			    supported */
 			armv7pmu.num_events = armv7_reset_read_pmnc();
-			perf_max_events = armv7pmu.num_events;
 			break;
 		case 0xC090:	/* Cortex-A9 */
 			armv7pmu.id = ARM_PERF_PMU_ID_CA9;
@@ -2964,7 +3008,6 @@ init_hw_perf_events(void)
 			/* Reset PMNC and read the nb of CNTx counters
 			    supported */
 			armv7pmu.num_events = armv7_reset_read_pmnc();
-			perf_max_events = armv7pmu.num_events;
 			break;
 		}
 	/* Intel CPUs [xscale]. */
@@ -2975,13 +3018,11 @@ init_hw_perf_events(void)
 			armpmu = &xscale1pmu;
 			memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
 					sizeof(xscale_perf_cache_map));
-			perf_max_events	= xscale1pmu.num_events;
 			break;
 		case 2:
 			armpmu = &xscale2pmu;
 			memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
 					sizeof(xscale_perf_cache_map));
-			perf_max_events	= xscale2pmu.num_events;
 			break;
 		}
 	}
@@ -2991,9 +3032,10 @@ init_hw_perf_events(void)
 				arm_pmu_names[armpmu->id], armpmu->num_events);
 	} else {
 		pr_info("no hardware support available\n");
-		perf_max_events = -1;
 	}
 
+	perf_pmu_register(&pmu);
+
 	return 0;
 }
 arch_initcall(init_hw_perf_events);
@@ -3001,13 +3043,6 @@ arch_initcall(init_hw_perf_events);
 /*
  * Callchain handling code.
  */
-static inline void
-callchain_store(struct perf_callchain_entry *entry,
-		u64 ip)
-{
-	if (entry->nr < PERF_MAX_STACK_DEPTH)
-		entry->ip[entry->nr++] = ip;
-}
 
 /*
  * The registers we're interested in are at the end of the variable
@@ -3039,7 +3074,7 @@ user_backtrace(struct frame_tail *tail,
 	if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail)))
 		return NULL;
 
-	callchain_store(entry, buftail.lr);
+	perf_callchain_store(entry, buftail.lr);
 
 	/*
 	 * Frame pointers should strictly progress back up the stack
@@ -3051,16 +3086,11 @@ user_backtrace(struct frame_tail *tail,
 	return buftail.fp - 1;
 }
 
-static void
-perf_callchain_user(struct pt_regs *regs,
-		    struct perf_callchain_entry *entry)
+void
+perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 {
 	struct frame_tail *tail;
 
-	callchain_store(entry, PERF_CONTEXT_USER);
-
-	if (!user_mode(regs))
-		regs = task_pt_regs(current);
 
 	tail = (struct frame_tail *)regs->ARM_fp - 1;
 
@@ -3078,56 +3108,18 @@ callchain_trace(struct stackframe *fr,
 		void *data)
 {
 	struct perf_callchain_entry *entry = data;
-	callchain_store(entry, fr->pc);
+	perf_callchain_store(entry, fr->pc);
 	return 0;
 }
 
-static void
-perf_callchain_kernel(struct pt_regs *regs,
-		      struct perf_callchain_entry *entry)
+void
+perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs)
 {
 	struct stackframe fr;
 
-	callchain_store(entry, PERF_CONTEXT_KERNEL);
 	fr.fp = regs->ARM_fp;
 	fr.sp = regs->ARM_sp;
 	fr.lr = regs->ARM_lr;
 	fr.pc = regs->ARM_pc;
 	walk_stackframe(&fr, callchain_trace, entry);
 }
-
-static void
-perf_do_callchain(struct pt_regs *regs,
-		  struct perf_callchain_entry *entry)
-{
-	int is_user;
-
-	if (!regs)
-		return;
-
-	is_user = user_mode(regs);
-
-	if (!current || !current->pid)
-		return;
-
-	if (is_user && current->state != TASK_RUNNING)
-		return;
-
-	if (!is_user)
-		perf_callchain_kernel(regs, entry);
-
-	if (current->mm)
-		perf_callchain_user(regs, entry);
-}
-
-static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
-
-struct perf_callchain_entry *
-perf_callchain(struct pt_regs *regs)
-{
-	struct perf_callchain_entry *entry = &__get_cpu_var(pmc_irq_entry);
-
-	entry->nr = 0;
-	perf_do_callchain(regs, entry);
-	return entry;
-}
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index a4a9cc88bec7..e76fcaadce03 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -28,7 +28,10 @@
 #include <linux/tick.h>
 #include <linux/utsname.h>
 #include <linux/uaccess.h>
+#include <linux/random.h>
+#include <linux/hw_breakpoint.h>
 
+#include <asm/cacheflush.h>
 #include <asm/leds.h>
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -36,6 +39,12 @@
 #include <asm/stacktrace.h>
 #include <asm/mach/time.h>
 
+#ifdef CONFIG_CC_STACKPROTECTOR
+#include <linux/stackprotector.h>
+unsigned long __stack_chk_guard __read_mostly;
+EXPORT_SYMBOL(__stack_chk_guard);
+#endif
+
 static const char *processor_modes[] = {
   "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
   "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
@@ -84,10 +93,9 @@ __setup("hlt", hlt_setup);
 
 void arm_machine_restart(char mode, const char *cmd)
 {
-	/*
-	 * Clean and disable cache, and turn off interrupts
-	 */
-	cpu_proc_fin();
+	/* Disable interrupts first */
+	local_irq_disable();
+	local_fiq_disable();
 
 	/*
 	 * Tell the mm system that we are going to reboot -
@@ -96,6 +104,15 @@ void arm_machine_restart(char mode, const char *cmd)
 	 */
 	setup_mm_for_reboot(mode);
 
+	/* Clean and invalidate caches */
+	flush_cache_all();
+
+	/* Turn off caching */
+	cpu_proc_fin();
+
+	/* Push out any further dirty data, and ensure cache is empty */
+	flush_cache_all();
+
 	/*
 	 * Now call the architecture specific reboot code.
 	 */
@@ -119,6 +136,25 @@ EXPORT_SYMBOL(pm_power_off);
 void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
 EXPORT_SYMBOL_GPL(arm_pm_restart);
 
+static void do_nothing(void *unused)
+{
+}
+
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
+void cpu_idle_wait(void)
+{
+	smp_mb();
+	/* kick all the CPUs so that they exit out of pm_idle */
+	smp_call_function(do_nothing, NULL, 1);
+}
+EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
 /*
  * This is our default idle handler.  We need to disable
@@ -189,19 +225,29 @@ int __init reboot_setup(char *str)
 
 __setup("reboot=", reboot_setup);
 
-void machine_halt(void)
+void machine_shutdown(void)
 {
+#ifdef CONFIG_SMP
+	smp_send_stop();
+#endif
 }
 
+void machine_halt(void)
+{
+	machine_shutdown();
+	while (1);
+}
 
 void machine_power_off(void)
 {
+	machine_shutdown();
 	if (pm_power_off)
 		pm_power_off();
 }
 
 void machine_restart(char *cmd)
 {
+	machine_shutdown();
 	arm_pm_restart(reboot_mode, cmd);
 }
 
@@ -291,6 +337,8 @@ void flush_thread(void)
 	struct thread_info *thread = current_thread_info();
 	struct task_struct *tsk = current;
 
+	flush_ptrace_hw_breakpoint(tsk);
+
 	memset(thread->used_cp, 0, sizeof(thread->used_cp));
 	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
 	memset(&thread->fpstate, 0, sizeof(union fp_state));
@@ -319,6 +367,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 	thread->cpu_context.sp = (unsigned long)childregs;
 	thread->cpu_context.pc = (unsigned long)ret_from_fork;
 
+	clear_ptrace_hw_breakpoint(p);
+
 	if (clone_flags & CLONE_SETTLS)
 		thread->tp_value = regs->ARM_r3;
 
@@ -426,3 +476,30 @@ unsigned long get_wchan(struct task_struct *p)
 	} while (count ++ < 16);
 	return 0;
 }
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+	unsigned long range_end = mm->brk + 0x02000000;
+	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+}
+
+/*
+ * The vectors page is always readable from user space for the
+ * atomic helpers and the signal restart code.  Let's declare a mapping
+ * for it so it is visible through ptrace and /proc/<pid>/mem.
+ */
+
+int vectors_user_mapping(void)
+{
+	struct mm_struct *mm = current->mm;
+	return install_special_mapping(mm, 0xffff0000, PAGE_SIZE,
+				       VM_READ | VM_EXEC |
+				       VM_MAYREAD | VM_MAYEXEC |
+				       VM_ALWAYSDUMP | VM_RESERVED,
+				       NULL);
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL;
+}
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 3f562a7c0a99..3e97483abcf0 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -19,6 +19,8 @@
 #include <linux/init.h>
 #include <linux/signal.h>
 #include <linux/uaccess.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -52,6 +54,102 @@
 #define BREAKINST_THUMB	0xde01
 #endif
 
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) \
+	{.name = #r, .offset = offsetof(struct pt_regs, ARM_##r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(ip),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(lr),
+	REG_OFFSET_NAME(pc),
+	REG_OFFSET_NAME(cpsr),
+	REG_OFFSET_NAME(ORIG_r0),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_query_register_name() - query register name from its offset
+ * @offset:	the offset of a register in struct pt_regs.
+ *
+ * regs_query_register_name() returns the name of a register from its
+ * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
+ */
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:      pt_regs which contains kernel stack pointer.
+ * @addr:      address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return ((addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
 /*
  * this routine will get a word off of the processes privileged stack.
  * the offset is how far from the base addr as stored in the THREAD.
@@ -751,13 +849,241 @@ static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
 }
 #endif
 
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+/*
+ * Convert a virtual register number into an index for a thread_info
+ * breakpoint array. Breakpoints are identified using positive numbers
+ * whilst watchpoints are negative. The registers are laid out as pairs
+ * of (address, control), each pair mapping to a unique hw_breakpoint struct.
+ * Register 0 is reserved for describing resource information.
+ */
+static int ptrace_hbp_num_to_idx(long num)
+{
+	if (num < 0)
+		num = (ARM_MAX_BRP << 1) - num;
+	return (num - 1) >> 1;
+}
+
+/*
+ * Returns the virtual register number for the address of the
+ * breakpoint at index idx.
+ */
+static long ptrace_hbp_idx_to_num(int idx)
+{
+	long mid = ARM_MAX_BRP << 1;
+	long num = (idx << 1) + 1;
+	return num > mid ? mid - num : num;
+}
+
+/*
+ * Handle hitting a HW-breakpoint.
+ */
+static void ptrace_hbptriggered(struct perf_event *bp, int unused,
+				     struct perf_sample_data *data,
+				     struct pt_regs *regs)
+{
+	struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp);
+	long num;
+	int i;
+	siginfo_t info;
+
+	for (i = 0; i < ARM_MAX_HBP_SLOTS; ++i)
+		if (current->thread.debug.hbp[i] == bp)
+			break;
+
+	num = (i == ARM_MAX_HBP_SLOTS) ? 0 : ptrace_hbp_idx_to_num(i);
+
+	info.si_signo	= SIGTRAP;
+	info.si_errno	= (int)num;
+	info.si_code	= TRAP_HWBKPT;
+	info.si_addr	= (void __user *)(bkpt->trigger);
+
+	force_sig_info(SIGTRAP, &info, current);
+}
+
+/*
+ * Set ptrace breakpoint pointers to zero for this task.
+ * This is required in order to prevent child processes from unregistering
+ * breakpoints held by their parent.
+ */
+void clear_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	memset(tsk->thread.debug.hbp, 0, sizeof(tsk->thread.debug.hbp));
+}
+
+/*
+ * Unregister breakpoints from this task and reset the pointers in
+ * the thread_struct.
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	int i;
+	struct thread_struct *t = &tsk->thread;
+
+	for (i = 0; i < ARM_MAX_HBP_SLOTS; i++) {
+		if (t->debug.hbp[i]) {
+			unregister_hw_breakpoint(t->debug.hbp[i]);
+			t->debug.hbp[i] = NULL;
+		}
+	}
+}
+
+static u32 ptrace_get_hbp_resource_info(void)
+{
+	u8 num_brps, num_wrps, debug_arch, wp_len;
+	u32 reg = 0;
+
+	num_brps	= hw_breakpoint_slots(TYPE_INST);
+	num_wrps	= hw_breakpoint_slots(TYPE_DATA);
+	debug_arch	= arch_get_debug_arch();
+	wp_len		= arch_get_max_wp_len();
+
+	reg		|= debug_arch;
+	reg		<<= 8;
+	reg		|= wp_len;
+	reg		<<= 8;
+	reg		|= num_wrps;
+	reg		<<= 8;
+	reg		|= num_brps;
+
+	return reg;
+}
+
+static struct perf_event *ptrace_hbp_create(struct task_struct *tsk, int type)
+{
+	struct perf_event_attr attr;
+
+	ptrace_breakpoint_init(&attr);
+
+	/* Initialise fields to sane defaults. */
+	attr.bp_addr	= 0;
+	attr.bp_len	= HW_BREAKPOINT_LEN_4;
+	attr.bp_type	= type;
+	attr.disabled	= 1;
+
+	return register_user_hw_breakpoint(&attr, ptrace_hbptriggered, tsk);
+}
+
+static int ptrace_gethbpregs(struct task_struct *tsk, long num,
+			     unsigned long  __user *data)
+{
+	u32 reg;
+	int idx, ret = 0;
+	struct perf_event *bp;
+	struct arch_hw_breakpoint_ctrl arch_ctrl;
+
+	if (num == 0) {
+		reg = ptrace_get_hbp_resource_info();
+	} else {
+		idx = ptrace_hbp_num_to_idx(num);
+		if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		bp = tsk->thread.debug.hbp[idx];
+		if (!bp) {
+			reg = 0;
+			goto put;
+		}
+
+		arch_ctrl = counter_arch_bp(bp)->ctrl;
+
+		/*
+		 * Fix up the len because we may have adjusted it
+		 * to compensate for an unaligned address.
+		 */
+		while (!(arch_ctrl.len & 0x1))
+			arch_ctrl.len >>= 1;
+
+		if (idx & 0x1)
+			reg = encode_ctrl_reg(arch_ctrl);
+		else
+			reg = bp->attr.bp_addr;
+	}
+
+put:
+	if (put_user(reg, data))
+		ret = -EFAULT;
+
+out:
+	return ret;
+}
+
+static int ptrace_sethbpregs(struct task_struct *tsk, long num,
+			     unsigned long __user *data)
+{
+	int idx, gen_len, gen_type, implied_type, ret = 0;
+	u32 user_val;
+	struct perf_event *bp;
+	struct arch_hw_breakpoint_ctrl ctrl;
+	struct perf_event_attr attr;
+
+	if (num == 0)
+		goto out;
+	else if (num < 0)
+		implied_type = HW_BREAKPOINT_RW;
+	else
+		implied_type = HW_BREAKPOINT_X;
+
+	idx = ptrace_hbp_num_to_idx(num);
+	if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (get_user(user_val, data)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	bp = tsk->thread.debug.hbp[idx];
+	if (!bp) {
+		bp = ptrace_hbp_create(tsk, implied_type);
+		if (IS_ERR(bp)) {
+			ret = PTR_ERR(bp);
+			goto out;
+		}
+		tsk->thread.debug.hbp[idx] = bp;
+	}
+
+	attr = bp->attr;
+
+	if (num & 0x1) {
+		/* Address */
+		attr.bp_addr	= user_val;
+	} else {
+		/* Control */
+		decode_ctrl_reg(user_val, &ctrl);
+		ret = arch_bp_generic_fields(ctrl, &gen_len, &gen_type);
+		if (ret)
+			goto out;
+
+		if ((gen_type & implied_type) != gen_type) {
+				ret = -EINVAL;
+				goto out;
+		}
+
+		attr.bp_len	= gen_len;
+		attr.bp_type	= gen_type;
+		attr.disabled	= !ctrl.enabled;
+	}
+
+	ret = modify_user_hw_breakpoint(bp, &attr);
+out:
+	return ret;
+}
+#endif
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
 {
 	int ret;
+	unsigned long __user *datap = (unsigned long __user *) data;
 
 	switch (request) {
 		case PTRACE_PEEKUSR:
-			ret = ptrace_read_user(child, addr, (unsigned long __user *)data);
+			ret = ptrace_read_user(child, addr, datap);
 			break;
 
 		case PTRACE_POKEUSR:
@@ -765,34 +1091,34 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 
 		case PTRACE_GETREGS:
-			ret = ptrace_getregs(child, (void __user *)data);
+			ret = ptrace_getregs(child, datap);
 			break;
 
 		case PTRACE_SETREGS:
-			ret = ptrace_setregs(child, (void __user *)data);
+			ret = ptrace_setregs(child, datap);
 			break;
 
 		case PTRACE_GETFPREGS:
-			ret = ptrace_getfpregs(child, (void __user *)data);
+			ret = ptrace_getfpregs(child, datap);
 			break;
 		
 		case PTRACE_SETFPREGS:
-			ret = ptrace_setfpregs(child, (void __user *)data);
+			ret = ptrace_setfpregs(child, datap);
 			break;
 
 #ifdef CONFIG_IWMMXT
 		case PTRACE_GETWMMXREGS:
-			ret = ptrace_getwmmxregs(child, (void __user *)data);
+			ret = ptrace_getwmmxregs(child, datap);
 			break;
 
 		case PTRACE_SETWMMXREGS:
-			ret = ptrace_setwmmxregs(child, (void __user *)data);
+			ret = ptrace_setwmmxregs(child, datap);
 			break;
 #endif
 
 		case PTRACE_GET_THREAD_AREA:
 			ret = put_user(task_thread_info(child)->tp_value,
-				       (unsigned long __user *) data);
+				       datap);
 			break;
 
 		case PTRACE_SET_SYSCALL:
@@ -802,21 +1128,32 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 #ifdef CONFIG_CRUNCH
 		case PTRACE_GETCRUNCHREGS:
-			ret = ptrace_getcrunchregs(child, (void __user *)data);
+			ret = ptrace_getcrunchregs(child, datap);
 			break;
 
 		case PTRACE_SETCRUNCHREGS:
-			ret = ptrace_setcrunchregs(child, (void __user *)data);
+			ret = ptrace_setcrunchregs(child, datap);
 			break;
 #endif
 
 #ifdef CONFIG_VFP
 		case PTRACE_GETVFPREGS:
-			ret = ptrace_getvfpregs(child, (void __user *)data);
+			ret = ptrace_getvfpregs(child, datap);
 			break;
 
 		case PTRACE_SETVFPREGS:
-			ret = ptrace_setvfpregs(child, (void __user *)data);
+			ret = ptrace_setvfpregs(child, datap);
+			break;
+#endif
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+		case PTRACE_GETHBPREGS:
+			ret = ptrace_gethbpregs(child, addr,
+						(unsigned long __user *)data);
+			break;
+		case PTRACE_SETHBPREGS:
+			ret = ptrace_sethbpregs(child, addr,
+						(unsigned long __user *)data);
 			break;
 #endif
 
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index 61930eb09029..fd26f8d65151 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -10,6 +10,12 @@ relocate_new_kernel:
 	ldr	r0,kexec_indirection_page
 	ldr	r1,kexec_start_address
 
+	/*
+	 * If there is no indirection page (we are doing crashdumps)
+	 * skip any relocation.
+	 */
+	cmp	r0, #0
+	beq	2f
 
 0:	/* top, read another word for the indirection page */
 	ldr	r3, [r0],#4
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 122d999bdc7c..336f14e0e5c2 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -19,12 +19,15 @@
 #include <linux/seq_file.h>
 #include <linux/screen_info.h>
 #include <linux/init.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 #include <linux/fs.h>
 #include <linux/proc_fs.h>
+#include <linux/memblock.h>
 
 #include <asm/unified.h>
 #include <asm/cpu.h>
@@ -33,6 +36,7 @@
 #include <asm/procinfo.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
+#include <asm/smp_plat.h>
 #include <asm/mach-types.h>
 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
@@ -44,7 +48,9 @@
 #include <asm/traps.h>
 #include <asm/unwind.h>
 
+#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
 #include "compat.h"
+#endif
 #include "atags.h"
 #include "tcm.h"
 
@@ -233,6 +239,35 @@ int cpu_architecture(void)
 	return cpu_arch;
 }
 
+static int cpu_has_aliasing_icache(unsigned int arch)
+{
+	int aliasing_icache;
+	unsigned int id_reg, num_sets, line_size;
+
+	/* arch specifies the register format */
+	switch (arch) {
+	case CPU_ARCH_ARMv7:
+		asm("mcr	p15, 2, %0, c0, c0, 0 @ set CSSELR"
+		    : /* No output operands */
+		    : "r" (1));
+		isb();
+		asm("mrc	p15, 1, %0, c0, c0, 0 @ read CCSIDR"
+		    : "=r" (id_reg));
+		line_size = 4 << ((id_reg & 0x7) + 2);
+		num_sets = ((id_reg >> 13) & 0x7fff) + 1;
+		aliasing_icache = (line_size * num_sets) > PAGE_SIZE;
+		break;
+	case CPU_ARCH_ARMv6:
+		aliasing_icache = read_cpuid_cachetype() & (1 << 11);
+		break;
+	default:
+		/* I-cache aliases will be handled by D-cache aliasing code */
+		aliasing_icache = 0;
+	}
+
+	return aliasing_icache;
+}
+
 static void __init cacheid_init(void)
 {
 	unsigned int cachetype = read_cpuid_cachetype();
@@ -244,10 +279,15 @@ static void __init cacheid_init(void)
 			cacheid = CACHEID_VIPT_NONALIASING;
 			if ((cachetype & (3 << 14)) == 1 << 14)
 				cacheid |= CACHEID_ASID_TAGGED;
-		} else if (cachetype & (1 << 23))
+			else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7))
+				cacheid |= CACHEID_VIPT_I_ALIASING;
+		} else if (cachetype & (1 << 23)) {
 			cacheid = CACHEID_VIPT_ALIASING;
-		else
+		} else {
 			cacheid = CACHEID_VIPT_NONALIASING;
+			if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6))
+				cacheid |= CACHEID_VIPT_I_ALIASING;
+		}
 	} else {
 		cacheid = CACHEID_VIVT;
 	}
@@ -258,7 +298,7 @@ static void __init cacheid_init(void)
 		cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown",
 		cache_is_vivt() ? "VIVT" :
 		icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" :
-		cache_is_vipt_aliasing() ? "VIPT aliasing" :
+		icache_is_vipt_aliasing() ? "VIPT aliasing" :
 		cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown");
 }
 
@@ -269,6 +309,21 @@ static void __init cacheid_init(void)
 extern struct proc_info_list *lookup_processor_type(unsigned int);
 extern struct machine_desc *lookup_machine_type(unsigned int);
 
+static void __init feat_v6_fixup(void)
+{
+	int id = read_cpuid_id();
+
+	if ((id & 0xff0f0000) != 0x41070000)
+		return;
+
+	/*
+	 * HWCAP_TLS is available only on 1136 r1p0 and later,
+	 * see also kuser_get_tls_init.
+	 */
+	if ((((id >> 4) & 0xfff) == 0xb36) && (((id >> 20) & 3) == 0))
+		elf_hwcap &= ~HWCAP_TLS;
+}
+
 static void __init setup_processor(void)
 {
 	struct proc_info_list *list;
@@ -311,6 +366,8 @@ static void __init setup_processor(void)
 	elf_hwcap &= ~HWCAP_THUMB;
 #endif
 
+	feat_v6_fixup();
+
 	cacheid_init();
 	cpu_proc_init();
 }
@@ -402,13 +459,12 @@ static int __init arm_add_memory(unsigned long start, unsigned long size)
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
 	bank->size  = size & PAGE_MASK;
-	bank->node  = PHYS_TO_NID(start);
 
 	/*
 	 * Check whether this memory region has non-zero size or
 	 * invalid node number.
 	 */
-	if (bank->size == 0 || bank->node >= MAX_NUMNODES)
+	if (bank->size == 0)
 		return -EINVAL;
 
 	meminfo.nr_banks++;
@@ -469,7 +525,7 @@ request_standard_resources(struct meminfo *mi, struct machine_desc *mdesc)
 
 	kernel_code.start   = virt_to_phys(_text);
 	kernel_code.end     = virt_to_phys(_etext - 1);
-	kernel_data.start   = virt_to_phys(_data);
+	kernel_data.start   = virt_to_phys(_sdata);
 	kernel_data.end     = virt_to_phys(_end - 1);
 
 	for (i = 0; i < mi->nr_banks; i++) {
@@ -663,6 +719,86 @@ static int __init customize_machine(void)
 }
 arch_initcall(customize_machine);
 
+#ifdef CONFIG_KEXEC
+static inline unsigned long long get_total_mem(void)
+{
+	unsigned long total;
+
+	total = max_low_pfn - min_low_pfn;
+	return total << PAGE_SHIFT;
+}
+
+/**
+ * reserve_crashkernel() - reserves memory are for crash kernel
+ *
+ * This function reserves memory area given in "crashkernel=" kernel command
+ * line parameter. The memory reserved is used by a dump capture kernel when
+ * primary kernel is crashing.
+ */
+static void __init reserve_crashkernel(void)
+{
+	unsigned long long crash_size, crash_base;
+	unsigned long long total_mem;
+	int ret;
+
+	total_mem = get_total_mem();
+	ret = parse_crashkernel(boot_command_line, total_mem,
+				&crash_size, &crash_base);
+	if (ret)
+		return;
+
+	ret = reserve_bootmem(crash_base, crash_size, BOOTMEM_EXCLUSIVE);
+	if (ret < 0) {
+		printk(KERN_WARNING "crashkernel reservation failed - "
+		       "memory is in use (0x%lx)\n", (unsigned long)crash_base);
+		return;
+	}
+
+	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+	       "for crashkernel (System RAM: %ldMB)\n",
+	       (unsigned long)(crash_size >> 20),
+	       (unsigned long)(crash_base >> 20),
+	       (unsigned long)(total_mem >> 20));
+
+	crashk_res.start = crash_base;
+	crashk_res.end = crash_base + crash_size - 1;
+	insert_resource(&iomem_resource, &crashk_res);
+}
+#else
+static inline void reserve_crashkernel(void) {}
+#endif /* CONFIG_KEXEC */
+
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+
+#ifdef CONFIG_CRASH_DUMP
+/*
+ * elfcorehdr= specifies the location of elf core header stored by the crashed
+ * kernel. This option will be passed by kexec loader to the capture kernel.
+ */
+static int __init setup_elfcorehdr(char *arg)
+{
+	char *end;
+
+	if (!arg)
+		return -EINVAL;
+
+	elfcorehdr_addr = memparse(arg, &end);
+	return end > arg ? 0 : -EINVAL;
+}
+early_param("elfcorehdr", setup_elfcorehdr);
+#endif /* CONFIG_CRASH_DUMP */
+
+static void __init squash_mem_tags(struct tag *tag)
+{
+	for (; tag->hdr.size; tag = tag_next(tag))
+		if (tag->hdr.tag == ATAG_MEM)
+			tag->hdr.tag = ATAG_NONE;
+}
+
 void __init setup_arch(char **cmdline_p)
 {
 	struct tag *tags = (struct tag *)&init_tags;
@@ -683,12 +819,14 @@ void __init setup_arch(char **cmdline_p)
 	else if (mdesc->boot_params)
 		tags = phys_to_virt(mdesc->boot_params);
 
+#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
 	/*
 	 * If we have the old style parameters, convert them to
 	 * a tag list.
 	 */
 	if (tags->hdr.tag != ATAG_CORE)
 		convert_to_tag_list(tags);
+#endif
 	if (tags->hdr.tag != ATAG_CORE)
 		tags = (struct tag *)&init_tags;
 
@@ -716,12 +854,16 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	arm_memblock_init(&meminfo, mdesc);
+
 	paging_init(mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
 #ifdef CONFIG_SMP
-	smp_init_cpus();
+	if (is_smp())
+		smp_init_cpus();
 #endif
+	reserve_crashkernel();
 
 	cpu_init();
 	tcm_init();
@@ -729,6 +871,7 @@ void __init setup_arch(char **cmdline_p)
 	/*
 	 * Set up various architecture-specific pointers
 	 */
+	arch_nr_irqs = mdesc->nr_irqs;
 	init_arch_irq = mdesc->init_irq;
 	system_timer = mdesc->timer;
 	init_machine = mdesc->init_machine;
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index b8c3d0f689d9..8c1959590252 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -33,6 +33,7 @@
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/processor.h>
+#include <asm/sections.h>
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
@@ -67,12 +68,47 @@ enum ipi_msg_type {
 	IPI_CPU_STOP,
 };
 
+static inline void identity_mapping_add(pgd_t *pgd, unsigned long start,
+	unsigned long end)
+{
+	unsigned long addr, prot;
+	pmd_t *pmd;
+
+	prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE;
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
+		prot |= PMD_BIT4;
+
+	for (addr = start & PGDIR_MASK; addr < end;) {
+		pmd = pmd_offset(pgd + pgd_index(addr), addr);
+		pmd[0] = __pmd(addr | prot);
+		addr += SECTION_SIZE;
+		pmd[1] = __pmd(addr | prot);
+		addr += SECTION_SIZE;
+		flush_pmd_entry(pmd);
+		outer_clean_range(__pa(pmd), __pa(pmd + 1));
+	}
+}
+
+static inline void identity_mapping_del(pgd_t *pgd, unsigned long start,
+	unsigned long end)
+{
+	unsigned long addr;
+	pmd_t *pmd;
+
+	for (addr = start & PGDIR_MASK; addr < end; addr += PGDIR_SIZE) {
+		pmd = pmd_offset(pgd + pgd_index(addr), addr);
+		pmd[0] = __pmd(0);
+		pmd[1] = __pmd(0);
+		clean_pmd_entry(pmd);
+		outer_clean_range(__pa(pmd), __pa(pmd + 1));
+	}
+}
+
 int __cpuinit __cpu_up(unsigned int cpu)
 {
 	struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
 	struct task_struct *idle = ci->idle;
 	pgd_t *pgd;
-	pmd_t *pmd;
 	int ret;
 
 	/*
@@ -101,11 +137,16 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	 * a 1:1 mapping for the physical address of the kernel.
 	 */
 	pgd = pgd_alloc(&init_mm);
-	pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
-	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
-		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
-	flush_pmd_entry(pmd);
-	outer_clean_range(__pa(pmd), __pa(pmd + 1));
+	if (!pgd)
+		return -ENOMEM;
+
+	if (PHYS_OFFSET != PAGE_OFFSET) {
+#ifndef CONFIG_HOTPLUG_CPU
+		identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end));
+#endif
+		identity_mapping_add(pgd, __pa(_stext), __pa(_etext));
+		identity_mapping_add(pgd, __pa(_sdata), __pa(_edata));
+	}
 
 	/*
 	 * We need to tell the secondary core where to find
@@ -143,8 +184,14 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	secondary_data.stack = NULL;
 	secondary_data.pgdir = 0;
 
-	*pmd = __pmd(0);
-	clean_pmd_entry(pmd);
+	if (PHYS_OFFSET != PAGE_OFFSET) {
+#ifndef CONFIG_HOTPLUG_CPU
+		identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end));
+#endif
+		identity_mapping_del(pgd, __pa(_stext), __pa(_etext));
+		identity_mapping_del(pgd, __pa(_sdata), __pa(_edata));
+	}
+
 	pgd_free(&init_mm, pgd);
 
 	if (ret) {
@@ -429,7 +476,11 @@ static void smp_timer_broadcast(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_TIMER);
 }
+#else
+#define smp_timer_broadcast	NULL
+#endif
 
+#ifndef CONFIG_LOCAL_TIMERS
 static void broadcast_timer_set_mode(enum clock_event_mode mode,
 	struct clock_event_device *evt)
 {
@@ -444,7 +495,6 @@ static void local_timer_setup(struct clock_event_device *evt)
 	evt->rating	= 400;
 	evt->mult	= 1;
 	evt->set_mode	= broadcast_timer_set_mode;
-	evt->broadcast	= smp_timer_broadcast;
 
 	clockevents_register_device(evt);
 }
@@ -456,6 +506,7 @@ void __cpuinit percpu_timer_setup(void)
 	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
 
 	evt->cpumask = cpumask_of(cpu);
+	evt->broadcast = smp_timer_broadcast;
 
 	local_timer_setup(evt);
 }
@@ -467,10 +518,13 @@ static DEFINE_SPINLOCK(stop_lock);
  */
 static void ipi_cpu_stop(unsigned int cpu)
 {
-	spin_lock(&stop_lock);
-	printk(KERN_CRIT "CPU%u: stopping\n", cpu);
-	dump_stack();
-	spin_unlock(&stop_lock);
+	if (system_state == SYSTEM_BOOTING ||
+	    system_state == SYSTEM_RUNNING) {
+		spin_lock(&stop_lock);
+		printk(KERN_CRIT "CPU%u: stopping\n", cpu);
+		dump_stack();
+		spin_unlock(&stop_lock);
+	}
 
 	set_cpu_online(cpu, false);
 
@@ -560,7 +614,8 @@ void smp_send_stop(void)
 {
 	cpumask_t mask = cpu_online_map;
 	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(&mask, IPI_CPU_STOP);
+	if (!cpus_empty(mask))
+		send_ipi_message(&mask, IPI_CPU_STOP);
 }
 
 /*
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 7c5f0c024db7..35882fbf37f9 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -132,7 +132,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	twd_calibrate_rate();
 
 	clk->name = "local_timer";
-	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+			CLOCK_EVT_FEAT_C3STOP;
 	clk->rating = 350;
 	clk->set_mode = twd_set_mode;
 	clk->set_next_event = twd_set_next_event;
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index c23501842b98..62e7c61d0342 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -62,8 +62,9 @@ asmlinkage int sys_vfork(struct pt_regs *regs)
 /* sys_execve() executes a new program.
  * This is called indirectly via a small wrapper
  */
-asmlinkage int sys_execve(char __user *filenamei, char __user * __user *argv,
-			  char __user * __user *envp, struct pt_regs *regs)
+asmlinkage int sys_execve(const char __user *filenamei,
+			  const char __user *const __user *argv,
+			  const char __user *const __user *envp, struct pt_regs *regs)
 {
 	int error;
 	char * filename;
@@ -78,14 +79,17 @@ out:
 	return error;
 }
 
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+int kernel_execve(const char *filename,
+		  const char *const argv[],
+		  const char *const envp[])
 {
 	struct pt_regs regs;
 	int ret;
 
 	memset(&regs, 0, sizeof(struct pt_regs));
-	ret = do_execve((char *)filename, (char __user * __user *)argv,
-			(char __user * __user *)envp, &regs);
+	ret = do_execve(filename,
+			(const char __user *const __user *)argv,
+			(const char __user *const __user *)envp, &regs);
 	if (ret < 0)
 		goto out;
 
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 33ff678e32f2..4ad8da15ef2b 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -141,7 +141,7 @@ static long cp_oldabi_stat64(struct kstat *stat,
 	return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
 }
 
-asmlinkage long sys_oabi_stat64(char __user * filename,
+asmlinkage long sys_oabi_stat64(const char __user * filename,
 				struct oldabi_stat64 __user * statbuf)
 {
 	struct kstat stat;
@@ -151,7 +151,7 @@ asmlinkage long sys_oabi_stat64(char __user * filename,
 	return error;
 }
 
-asmlinkage long sys_oabi_lstat64(char __user * filename,
+asmlinkage long sys_oabi_lstat64(const char __user * filename,
 				 struct oldabi_stat64 __user * statbuf)
 {
 	struct kstat stat;
@@ -172,7 +172,7 @@ asmlinkage long sys_oabi_fstat64(unsigned long fd,
 }
 
 asmlinkage long sys_oabi_fstatat64(int dfd,
-				   char __user *filename,
+				   const char __user *filename,
 				   struct oldabi_stat64  __user *statbuf,
 				   int flag)
 {
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
index e50303868f1b..26685c2f7a49 100644
--- a/arch/arm/kernel/tcm.c
+++ b/arch/arm/kernel/tcm.c
@@ -13,38 +13,35 @@
 #include <linux/ioport.h>
 #include <linux/genalloc.h>
 #include <linux/string.h> /* memcpy */
-#include <asm/page.h> /* PAGE_SHIFT */
 #include <asm/cputype.h>
 #include <asm/mach/map.h>
 #include <mach/memory.h>
 #include "tcm.h"
 
-/* Scream and warn about misuse */
-#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \
-    !defined(DTCM_OFFSET) || !defined(DTCM_END)
-#error "TCM support selected but offsets not defined!"
-#endif
-
 static struct gen_pool *tcm_pool;
 
 /* TCM section definitions from the linker */
 extern char __itcm_start, __sitcm_text, __eitcm_text;
 extern char __dtcm_start, __sdtcm_data, __edtcm_data;
 
+/* These will be increased as we run */
+u32 dtcm_end = DTCM_OFFSET;
+u32 itcm_end = ITCM_OFFSET;
+
 /*
  * TCM memory resources
  */
 static struct resource dtcm_res = {
 	.name = "DTCM RAM",
 	.start = DTCM_OFFSET,
-	.end = DTCM_END,
+	.end = DTCM_OFFSET,
 	.flags = IORESOURCE_MEM
 };
 
 static struct resource itcm_res = {
 	.name = "ITCM RAM",
 	.start = ITCM_OFFSET,
-	.end = ITCM_END,
+	.end = ITCM_OFFSET,
 	.flags = IORESOURCE_MEM
 };
 
@@ -52,8 +49,8 @@ static struct map_desc dtcm_iomap[] __initdata = {
 	{
 		.virtual	= DTCM_OFFSET,
 		.pfn		= __phys_to_pfn(DTCM_OFFSET),
-		.length		= (DTCM_END - DTCM_OFFSET + 1),
-		.type		= MT_UNCACHED
+		.length		= 0,
+		.type		= MT_MEMORY_DTCM
 	}
 };
 
@@ -61,8 +58,8 @@ static struct map_desc itcm_iomap[] __initdata = {
 	{
 		.virtual	= ITCM_OFFSET,
 		.pfn		= __phys_to_pfn(ITCM_OFFSET),
-		.length		= (ITCM_END - ITCM_OFFSET + 1),
-		.type		= MT_UNCACHED
+		.length		= 0,
+		.type		= MT_MEMORY_ITCM
 	}
 };
 
@@ -93,14 +90,24 @@ void tcm_free(void *addr, size_t len)
 }
 EXPORT_SYMBOL(tcm_free);
 
-
-static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
+static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
+				  u32 *offset)
 {
 	const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
 				    256, 512, 1024, -1, -1, -1, -1 };
 	u32 tcm_region;
 	int tcm_size;
 
+	/*
+	 * If there are more than one TCM bank of this type,
+	 * select the TCM bank to operate on in the TCM selection
+	 * register.
+	 */
+	if (banks > 1)
+		asm("mcr	p15, 0, %0, c9, c2, 0"
+		    : /* No output operands */
+		    : "r" (bank));
+
 	/* Read the special TCM region register c9, 0 */
 	if (!type)
 		asm("mrc	p15, 0, %0, c9, c1, 0"
@@ -111,26 +118,24 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
 
 	tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
 	if (tcm_size < 0) {
-		pr_err("CPU: %sTCM of unknown size!\n",
-			type ? "I" : "D");
+		pr_err("CPU: %sTCM%d of unknown size\n",
+		       type ? "I" : "D", bank);
+		return -EINVAL;
+	} else if (tcm_size > 32) {
+		pr_err("CPU: %sTCM%d larger than 32k found\n",
+		       type ? "I" : "D", bank);
+		return -EINVAL;
 	} else {
-		pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n",
+		pr_info("CPU: found %sTCM%d %dk @ %08x, %senabled\n",
 			type ? "I" : "D",
+			bank,
 			tcm_size,
 			(tcm_region & 0xfffff000U),
 			(tcm_region & 1) ? "" : "not ");
 	}
 
-	if (tcm_size != expected_size) {
-		pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n",
-		       type ? "I" : "D",
-		       tcm_size,
-		       expected_size);
-		/* Adjust to the expected size? what can we do... */
-	}
-
 	/* Force move the TCM bank to where we want it, enable */
-	tcm_region = offset | (tcm_region & 0x00000ffeU) | 1;
+	tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1;
 
 	if (!type)
 		asm("mcr	p15, 0, %0, c9, c1, 0"
@@ -141,10 +146,15 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
 		    : /* No output operands */
 		    : "r" (tcm_region));
 
-	pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n",
-		 type ? "I" : "D",
-		 tcm_size,
-		 (tcm_region & 0xfffff000U));
+	/* Increase offset */
+	*offset += (tcm_size << 10);
+
+	pr_info("CPU: moved %sTCM%d %dk to %08x, enabled\n",
+		type ? "I" : "D",
+		bank,
+		tcm_size,
+		(tcm_region & 0xfffff000U));
+	return 0;
 }
 
 /*
@@ -153,34 +163,52 @@ static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
 void __init tcm_init(void)
 {
 	u32 tcm_status = read_cpuid_tcmstatus();
+	u8 dtcm_banks = (tcm_status >> 16) & 0x03;
+	u8 itcm_banks = (tcm_status & 0x03);
 	char *start;
 	char *end;
 	char *ram;
+	int ret;
+	int i;
 
 	/* Setup DTCM if present */
-	if (tcm_status & (1 << 16)) {
-		setup_tcm_bank(0, DTCM_OFFSET,
-			       (DTCM_END - DTCM_OFFSET + 1) >> 10);
+	if (dtcm_banks > 0) {
+		for (i = 0; i < dtcm_banks; i++) {
+			ret = setup_tcm_bank(0, i, dtcm_banks, &dtcm_end);
+			if (ret)
+				return;
+		}
+		dtcm_res.end = dtcm_end - 1;
 		request_resource(&iomem_resource, &dtcm_res);
+		dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET;
 		iotable_init(dtcm_iomap, 1);
 		/* Copy data from RAM to DTCM */
 		start = &__sdtcm_data;
 		end   = &__edtcm_data;
 		ram   = &__dtcm_start;
+		/* This means you compiled more code than fits into DTCM */
+		BUG_ON((end - start) > (dtcm_end - DTCM_OFFSET));
 		memcpy(start, ram, (end-start));
 		pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
 	}
 
 	/* Setup ITCM if present */
-	if (tcm_status & 1) {
-		setup_tcm_bank(1, ITCM_OFFSET,
-			       (ITCM_END - ITCM_OFFSET + 1) >> 10);
+	if (itcm_banks > 0) {
+		for (i = 0; i < itcm_banks; i++) {
+			ret = setup_tcm_bank(1, i, itcm_banks, &itcm_end);
+			if (ret)
+				return;
+		}
+		itcm_res.end = itcm_end - 1;
 		request_resource(&iomem_resource, &itcm_res);
+		itcm_iomap[0].length = itcm_end - ITCM_OFFSET;
 		iotable_init(itcm_iomap, 1);
 		/* Copy code from RAM to ITCM */
 		start = &__sitcm_text;
 		end   = &__eitcm_text;
 		ram   = &__itcm_start;
+		/* This means you compiled more code than fits into ITCM */
+		BUG_ON((end - start) > (itcm_end - ITCM_OFFSET));
 		memcpy(start, ram, (end-start));
 		pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
 	}
@@ -208,10 +236,10 @@ static int __init setup_tcm_pool(void)
 	pr_debug("Setting up TCM memory pool\n");
 
 	/* Add the rest of DTCM to the TCM pool */
-	if (tcm_status & (1 << 16)) {
-		if (dtcm_pool_start < DTCM_END) {
+	if (tcm_status & (0x03 << 16)) {
+		if (dtcm_pool_start < dtcm_end) {
 			ret = gen_pool_add(tcm_pool, dtcm_pool_start,
-					   DTCM_END - dtcm_pool_start + 1, -1);
+					   dtcm_end - dtcm_pool_start, -1);
 			if (ret) {
 				pr_err("CPU DTCM: could not add DTCM " \
 				       "remainder to pool!\n");
@@ -219,16 +247,16 @@ static int __init setup_tcm_pool(void)
 			}
 			pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
 				 "the TCM memory pool\n",
-				 DTCM_END - dtcm_pool_start + 1,
+				 dtcm_end - dtcm_pool_start,
 				 dtcm_pool_start);
 		}
 	}
 
 	/* Add the rest of ITCM to the TCM pool */
-	if (tcm_status & 1) {
-		if (itcm_pool_start < ITCM_END) {
+	if (tcm_status & 0x03) {
+		if (itcm_pool_start < itcm_end) {
 			ret = gen_pool_add(tcm_pool, itcm_pool_start,
-					   ITCM_END - itcm_pool_start + 1, -1);
+					   itcm_end - itcm_pool_start, -1);
 			if (ret) {
 				pr_err("CPU ITCM: could not add ITCM " \
 				       "remainder to pool!\n");
@@ -236,7 +264,7 @@ static int __init setup_tcm_pool(void)
 			}
 			pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
 				 "the TCM memory pool\n",
-				 ITCM_END - itcm_pool_start + 1,
+				 itcm_end - itcm_pool_start,
 				 itcm_pool_start);
 		}
 	}
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 1621e5327b2a..cda78d59aa31 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <asm/unistd.h>
 #include <asm/traps.h>
 #include <asm/unwind.h>
+#include <asm/tls.h>
 
 #include "ptrace.h"
 #include "signal.h"
@@ -518,17 +519,20 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 
 	case NR(set_tls):
 		thread->tp_value = regs->ARM_r0;
-#if defined(CONFIG_HAS_TLS_REG)
-		asm ("mcr p15, 0, %0, c13, c0, 3" : : "r" (regs->ARM_r0) );
-#elif !defined(CONFIG_TLS_REG_EMUL)
-		/*
-		 * User space must never try to access this directly.
-		 * Expect your app to break eventually if you do so.
-		 * The user helper at 0xffff0fe0 must be used instead.
-		 * (see entry-armv.S for details)
-		 */
-		*((unsigned int *)0xffff0ff0) = regs->ARM_r0;
-#endif
+		if (tls_emu)
+			return 0;
+		if (has_tls_reg) {
+			asm ("mcr p15, 0, %0, c13, c0, 3"
+				: : "r" (regs->ARM_r0));
+		} else {
+			/*
+			 * User space must never try to access this directly.
+			 * Expect your app to break eventually if you do so.
+			 * The user helper at 0xffff0fe0 must be used instead.
+			 * (see entry-armv.S for details)
+			 */
+			*((unsigned int *)0xffff0ff0) = regs->ARM_r0;
+		}
 		return 0;
 
 #ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG
@@ -743,6 +747,16 @@ void __init trap_init(void)
 	return;
 }
 
+static void __init kuser_get_tls_init(unsigned long vectors)
+{
+	/*
+	 * vectors + 0xfe0 = __kuser_get_tls
+	 * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8
+	 */
+	if (tls_emu || has_tls_reg)
+		memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4);
+}
+
 void __init early_trap_init(void)
 {
 	unsigned long vectors = CONFIG_VECTORS_BASE;
@@ -761,6 +775,11 @@ void __init early_trap_init(void)
 	memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
 
 	/*
+	 * Do processor specific fixups for the kuser helpers
+	 */
+	kuser_get_tls_init(vectors);
+
+	/*
 	 * Copy signal return handlers into the vector page, and
 	 * set sigreturn to be a pointer to these.
 	 */
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index dd81a918c106..2a161765f6d5 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -146,6 +146,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr)
 			    addr < table->end_addr) {
 				idx = search_index(addr, table->start,
 						   table->stop - 1);
+				/* Move-to-front to exploit common traces */
+				list_move(&table->list, &unwind_tables);
 				break;
 			}
 		}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index b16c07914b55..cead8893b46b 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -8,6 +8,19 @@
 #include <asm/memory.h>
 #include <asm/page.h>
 	
+#define PROC_INFO							\
+	VMLINUX_SYMBOL(__proc_info_begin) = .;				\
+	*(.proc.info.init)						\
+	VMLINUX_SYMBOL(__proc_info_end) = .;
+
+#ifdef CONFIG_HOTPLUG_CPU
+#define ARM_CPU_DISCARD(x)
+#define ARM_CPU_KEEP(x)		x
+#else
+#define ARM_CPU_DISCARD(x)	x
+#define ARM_CPU_KEEP(x)
+#endif
+
 OUTPUT_ARCH(arm)
 ENTRY(stext)
 
@@ -31,15 +44,18 @@ SECTIONS
 			HEAD_TEXT
 			INIT_TEXT
 		_einittext = .;
-		__proc_info_begin = .;
-			*(.proc.info.init)
-		__proc_info_end = .;
+		ARM_CPU_DISCARD(PROC_INFO)
 		__arch_info_begin = .;
 			*(.arch.info.init)
 		__arch_info_end = .;
 		__tagtable_begin = .;
 			*(.taglist.init)
 		__tagtable_end = .;
+#ifdef CONFIG_SMP_ON_UP
+		__smpalt_begin = .;
+			*(.alt.smp.init)
+		__smpalt_end = .;
+#endif
 
 		INIT_SETUP(16)
 
@@ -68,10 +84,8 @@ SECTIONS
 	/DISCARD/ : {
 		*(.ARM.exidx.exit.text)
 		*(.ARM.extab.exit.text)
-#ifndef CONFIG_HOTPLUG_CPU
-		*(.ARM.exidx.cpuexit.text)
-		*(.ARM.extab.cpuexit.text)
-#endif
+		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
+		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
 #ifndef CONFIG_HOTPLUG
 		*(.ARM.exidx.devexit.text)
 		*(.ARM.extab.devexit.text)
@@ -99,13 +113,13 @@ SECTIONS
 			*(.rodata.*)
 			*(.glue_7)
 			*(.glue_7t)
+		. = ALIGN(4);
 		*(.got)			/* Global offset table		*/
+			ARM_CPU_KEEP(PROC_INFO)
 	}
 
 	RO_DATA(PAGE_SIZE)
 
-	_etext = .;			/* End of text and rodata section */
-
 #ifdef CONFIG_ARM_UNWIND
 	/*
 	 * Stack unwinding tables
@@ -123,6 +137,8 @@ SECTIONS
 	}
 #endif
 
+	_etext = .;			/* End of text and rodata section */
+
 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
 	. = PAGE_OFFSET + TEXT_OFFSET;
@@ -237,6 +253,12 @@ SECTIONS
 
 	/* Default discards */
 	DISCARDS
+
+#ifndef CONFIG_SMP_ON_UP
+	/DISCARD/ : {
+		*(.alt.smp.init)
+	}
+#endif
 }
 
 /*
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 030ba7219f48..59ff42ddf0ae 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -41,7 +41,6 @@ else
 endif
 
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
-lib-$(CONFIG_ARCH_L7200)	+= io-acorn.o
 lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
 $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index 81a3ecc0d104..0eb3e3e5b2d1 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -95,8 +95,6 @@ static void __init aaed2000_map_io(void)
 
 MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
 	/* Maintainer: Nicolas Bellido Y Ortega */
-	.phys_io	= PIO_BASE,
-	.io_pg_offst	= ((VIO_BASE) >> 18) & 0xfffc,
 	.map_io		= aaed2000_map_io,
 	.init_irq	= aaed2000_init_irq,
 	.timer		= &aaec2000_timer,
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
index a9cac368bfe6..bc7ad5561c4c 100644
--- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -10,12 +10,10 @@
  */
 
 #include "hardware.h"
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000		@ physical
-		movne	\rx, #io_p2v(0x80000000)	@ virtual
-		orr	\rx, \rx, #0x00000800
+		.macro	addruart, rp, rv
+		mov	\rp, 0x00000800
+		orr	\rv, \rp, #io_p2v(0x80000000)	@ virtual
+		orr	\rp, \rp, #0x80000000		@ physical
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
index c00822543d9f..4f93c567a35a 100644
--- a/arch/arm/mach-aaec2000/include/mach/memory.h
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -14,14 +14,4 @@
 
 #define PHYS_OFFSET	UL(0xf0000000)
 
-/*
- * The nodes are the followings:
- *
- *   node 0: 0xf000.0000 - 0xf3ff.ffff
- *   node 1: 0xf400.0000 - 0xf7ff.ffff
- *   node 2: 0xf800.0000 - 0xfbff.ffff
- *   node 3: 0xfc00.0000 - 0xffff.ffff
- */
-#define NODE_MEM_SIZE_BITS	26
-
 #endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
index 551f68f666bf..cff4e0a996ce 100644
--- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -11,6 +11,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END		0xd0000000
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 841eaf8f27e2..c015b684b4fe 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -33,6 +33,7 @@ config ARCH_AT91SAM9260
 	select HAVE_AT91_USART3
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
+	select HAVE_NET_MACB
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
@@ -51,6 +52,7 @@ config ARCH_AT91SAM9263
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
@@ -66,6 +68,7 @@ config ARCH_AT91SAM9G20
 	select HAVE_AT91_USART3
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
+	select HAVE_NET_MACB
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
@@ -73,6 +76,7 @@ config ARCH_AT91SAM9G45
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
@@ -105,7 +109,7 @@ config MACH_ONEARM
 	bool "Ajeco 1ARM Single Board Computer"
 	help
 	  Select this if you are using Ajeco's 1ARM Single Board Computer.
-	  <http://www.ajeco.fi/products.htm>
+	  <http://www.ajeco.fi/>
 
 config ARCH_AT91RM9200DK
 	bool "Atmel AT91RM9200-DK Development board"
@@ -137,7 +141,7 @@ config MACH_CARMEVA
 	bool "Conitec ARM&EVA"
 	help
 	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
-	  <http://www.conitec.net/english/linuxboard.htm>
+	  <http://www.conitec.net/english/linuxboard.php>
 
 config MACH_ATEB9200
 	bool "Embest ATEB9200"
@@ -149,7 +153,7 @@ config MACH_KB9200
 	bool "KwikByte KB920x"
 	help
 	  Select this if you are using KwikByte's KB920x board.
-	  <http://kwikbyte.com/KB9202_description_new.htm>
+	  <http://www.kwikbyte.com/KB9202.html>
 
 config MACH_PICOTUX2XX
 	bool "picotux 200"
@@ -248,6 +252,12 @@ config MACH_CPU9260
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9260 Board <http://www.eukrea.com/>
 
+config MACH_FLEXIBITY
+	bool "Flexibity Connect board"
+	help
+	  Select this if you are using Flexibity Connect board
+	  <http://www.flexibity.com>
+
 endif
 
 # ----------------------------------------------------------
@@ -338,6 +348,7 @@ config MACH_AT91SAM9G20EK
 	  that embeds only one SD/MMC slot.
 
 config MACH_AT91SAM9G20EK_2MMC
+	depends on MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
 	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
@@ -364,6 +375,23 @@ config MACH_STAMP9G20
 	  evaluation board.
 	  <http://www.taskit.de/en/>
 
+config MACH_PCONTROL_G20
+	bool "PControl G20 CPU module"
+	help
+	  Select this if you are using taskit's Stamp9G20 CPU module on this
+	  carrier board, beeing the decentralized unit of a building automation
+	  system; featuring nvram, eth-switch, iso-rs485, display, io
+endif
+
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+        bool "Bluewater Systems Snapper 9260/9G20 module"
+        help
+          Select this if you are using the Bluewater Systems Snapper 9260 or
+          Snapper 9G20 modules.
+          <http://www.bluewatersys.com/>
 endif
 
 # ----------------------------------------------------------
@@ -372,8 +400,8 @@ if ARCH_AT91SAM9G45
 
 comment "AT91SAM9G45 Board Type"
 
-config MACH_AT91SAM9G45EKES
-	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+config MACH_AT91SAM9M10G45EK
+	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
 	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c1f821e58222..821eb842795f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -11,12 +11,12 @@ obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
 
 # CPU-specific support
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
+obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o at91sam9_alt_reset.o
+obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o at91sam9_alt_reset.o
+obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT572D940HF)  += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
@@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
 obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
 obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 obj-$(CONFIG_MACH_CPU9260)	+= board-cpu9krea.o
+obj-$(CONFIG_MACH_FLEXIBITY)	+= board-flexibity.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
@@ -61,13 +62,16 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
-obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
+obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o
+
+# AT91SAM9260/AT91SAM9G20 board-specific support
+obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
 
 # AT91SAM9G45 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
 
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 0894f1077be7..195208b30024 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -279,11 +279,6 @@ static struct at91_gpio_bank at91sam9260_gpio[] = {
 	}
 };
 
-static void at91sam9260_reset(void)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
 static void at91sam9260_poweroff(void)
 {
 	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
@@ -327,7 +322,7 @@ void __init at91sam9260_initialize(unsigned long main_clock)
 	else
 		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
 
-	at91_arch_reset = at91sam9260_reset;
+	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9260_poweroff;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 4ecf37996c77..fcad88668504 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -257,11 +257,6 @@ static struct at91_gpio_bank at91sam9261_gpio[] = {
 	}
 };
 
-static void at91sam9261_reset(void)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
 static void at91sam9261_poweroff(void)
 {
 	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
@@ -283,7 +278,7 @@ void __init at91sam9261_initialize(unsigned long main_clock)
 		iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
 
 
-	at91_arch_reset = at91sam9261_reset;
+	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
 			| (1 << AT91SAM9261_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 942792d630d8..249f900954d8 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -269,11 +269,6 @@ static struct at91_gpio_bank at91sam9263_gpio[] = {
 	}
 };
 
-static void at91sam9263_reset(void)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
 static void at91sam9263_poweroff(void)
 {
 	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
@@ -289,7 +284,7 @@ void __init at91sam9263_initialize(unsigned long main_clock)
 	/* Map peripherals */
 	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
 
-	at91_arch_reset = at91sam9263_reset;
+	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9263_poweroff;
 	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
 
diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S
new file mode 100644
index 000000000000..e0256deb91fb
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9_alt_reset.S
@@ -0,0 +1,48 @@
+/*
+ * reset AT91SAM9G20 as per errata
+ *
+ * (C) BitBox Ltd 2010
+ *
+ * unless the SDRAM is cleanly shutdown before we hit the
+ * reset register it can be left driving the data bus and
+ * killing the chance of a subsequent boot from NAND
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+#include <asm/system.h>
+#include <mach/hardware.h>
+#include <mach/at91sam9_sdramc.h>
+#include <mach/at91_rstc.h>
+
+			.arm
+
+			.globl	at91sam9_alt_reset
+
+at91sam9_alt_reset:	mrc	p15, 0, r0, c1, c0, 0
+			orr	r0, r0, #CR_I
+			mcr	p15, 0, r0, c1, c0, 0		@ enable I-cache
+
+			ldr	r0, .at91_va_base_sdramc	@ preload constants
+			ldr	r1, .at91_va_base_rstc_cr
+
+			mov	r2, #1
+			mov	r3, #AT91_SDRAMC_LPCB_POWER_DOWN
+			ldr	r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST
+
+			.balign	32				@ align to cache line
+
+			str	r2, [r0, #AT91_SDRAMC_TR]	@ disable SDRAM access
+			str	r3, [r0, #AT91_SDRAMC_LPR]	@ power down SDRAM
+			str	r4, [r1]			@ reset processor
+
+			b	.
+
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS + AT91_SDRAMC0
+.at91_va_base_rstc_cr:
+	.word AT91_VA_BASE_SYS + AT91_RSTC_CR
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 85166b7e69a1..c67b47f1c0fd 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -20,6 +20,7 @@
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -120,8 +121,8 @@ static struct clk ssc1_clk = {
 	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk tcb_clk = {
-	.name		= "tcb_clk",
+static struct clk tcb0_clk = {
+	.name		= "tcb0_clk",
 	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -176,6 +177,13 @@ static struct clk mmc1_clk = {
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 
+/* Video decoder clock - Only for sam9m10/sam9m11 */
+static struct clk vdec_clk = {
+	.name		= "vdec_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_VDEC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
 /* One additional fake clock for ohci */
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
@@ -184,6 +192,14 @@ static struct clk ohci_clk = {
 	.parent		= &uhphs_clk,
 };
 
+/* One additional fake clock for second TC block */
+static struct clk tcb1_clk = {
+	.name		= "tcb1_clk",
+	.pmc_mask	= 0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.parent		= &tcb0_clk,
+};
+
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
 	&pioB_clk,
@@ -200,7 +216,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi1_clk,
 	&ssc0_clk,
 	&ssc1_clk,
-	&tcb_clk,
+	&tcb0_clk,
 	&pwm_clk,
 	&tsc_clk,
 	&dma_clk,
@@ -213,6 +229,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&mmc1_clk,
 	// irq0
 	&ohci_clk,
+	&tcb1_clk,
 };
 
 /*
@@ -239,6 +256,9 @@ static void __init at91sam9g45_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
+		clk_register(&vdec_clk);
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 }
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 809114d5a5a6..1e8f275c17f6 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -15,6 +15,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
+#include <linux/atmel-mci.h>
 
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
@@ -25,6 +26,7 @@
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at_hdmac.h>
+#include <mach/atmel-mci.h>
 
 #include "generic.h"
 
@@ -46,7 +48,7 @@ static struct resource hdmac_resources[] = {
 		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
-	[2] = {
+	[1] = {
 		.start	= AT91SAM9G45_ID_DMA,
 		.end	= AT91SAM9G45_ID_DMA,
 		.flags	= IORESOURCE_IRQ,
@@ -350,6 +352,169 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {}
 
 
 /* --------------------------------------------------------------------
+ *  MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct mci_platform_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_MCI0,
+		.end	= AT91SAM9G45_BASE_MCI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_MCI0,
+		.end	= AT91SAM9G45_ID_MCI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_mmc0_device = {
+	.name		= "atmel_mci",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &mmc0_data,
+	},
+	.resource	= mmc0_resources,
+	.num_resources	= ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_MCI1,
+		.end	= AT91SAM9G45_BASE_MCI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_MCI1,
+		.end	= AT91SAM9G45_ID_MCI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_mmc1_device = {
+	.name		= "atmel_mci",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &mmc1_data,
+	},
+	.resource	= mmc1_resources,
+	.num_resources	= ARRAY_SIZE(mmc1_resources),
+};
+
+/* Consider only one slot : slot 0 */
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
+{
+
+	if (!data)
+		return;
+
+	/* Must have at least one usable slot */
+	if (!data->slot[0].bus_width)
+		return;
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+	{
+	struct at_dma_slave	*atslave;
+	struct mci_dma_data	*alt_atslave;
+
+	alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
+	atslave = &alt_atslave->sdata;
+
+	/* DMA slave channel configuration */
+	atslave->dma_dev = &at_hdmac_device.dev;
+	atslave->reg_width = AT_DMA_SLAVE_WIDTH_32BIT;
+	atslave->cfg = ATC_FIFOCFG_HALFFIFO
+			| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
+	atslave->ctrla = ATC_SCSIZE_16 | ATC_DCSIZE_16;
+	if (mmc_id == 0)	/* MCI0 */
+		atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
+			      | ATC_DST_PER(AT_DMA_ID_MCI0);
+
+	else			/* MCI1 */
+		atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1)
+			      | ATC_DST_PER(AT_DMA_ID_MCI1);
+
+	data->dma_slave = alt_atslave;
+	}
+#endif
+
+
+	/* input/irq */
+	if (data->slot[0].detect_pin) {
+		at91_set_gpio_input(data->slot[0].detect_pin, 1);
+		at91_set_deglitch(data->slot[0].detect_pin, 1);
+	}
+	if (data->slot[0].wp_pin)
+		at91_set_gpio_input(data->slot[0].wp_pin, 1);
+
+	if (mmc_id == 0) {		/* MCI0 */
+
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA0, 0);
+
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA1, 1);
+
+		/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
+		at91_set_A_periph(AT91_PIN_PA2, 1);
+		if (data->slot[0].bus_width == 4) {
+			at91_set_A_periph(AT91_PIN_PA3, 1);
+			at91_set_A_periph(AT91_PIN_PA4, 1);
+			at91_set_A_periph(AT91_PIN_PA5, 1);
+			if (data->slot[0].bus_width == 8) {
+				at91_set_A_periph(AT91_PIN_PA6, 1);
+				at91_set_A_periph(AT91_PIN_PA7, 1);
+				at91_set_A_periph(AT91_PIN_PA8, 1);
+				at91_set_A_periph(AT91_PIN_PA9, 1);
+			}
+		}
+
+		mmc0_data = *data;
+		at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk");
+		platform_device_register(&at91sam9g45_mmc0_device);
+
+	} else {			/* MCI1 */
+
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA31, 0);
+
+		/* CMD */
+		at91_set_A_periph(AT91_PIN_PA22, 1);
+
+		/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
+		at91_set_A_periph(AT91_PIN_PA23, 1);
+		if (data->slot[0].bus_width == 4) {
+			at91_set_A_periph(AT91_PIN_PA24, 1);
+			at91_set_A_periph(AT91_PIN_PA25, 1);
+			at91_set_A_periph(AT91_PIN_PA26, 1);
+			if (data->slot[0].bus_width == 8) {
+				at91_set_A_periph(AT91_PIN_PA27, 1);
+				at91_set_A_periph(AT91_PIN_PA28, 1);
+				at91_set_A_periph(AT91_PIN_PA29, 1);
+				at91_set_A_periph(AT91_PIN_PA30, 1);
+			}
+		}
+
+		mmc1_data = *data;
+		at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk");
+		platform_device_register(&at91sam9g45_mmc1_device);
+
+	}
+}
+#else
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
@@ -426,7 +591,7 @@ static struct i2c_gpio_platform_data pdata_i2c0 = {
 	.sda_is_open_drain	= 1,
 	.scl_pin		= AT91_PIN_PA21,
 	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
+	.udelay			= 5,		/* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi0_device = {
@@ -440,7 +605,7 @@ static struct i2c_gpio_platform_data pdata_i2c1 = {
 	.sda_is_open_drain	= 1,
 	.scl_pin		= AT91_PIN_PB11,
 	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
+	.udelay			= 5,		/* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi1_device = {
@@ -835,9 +1000,9 @@ static struct platform_device at91sam9g45_tcb1_device = {
 static void __init at91_add_device_tc(void)
 {
 	/* this chip has one clock and irq for all six TC channels */
-	at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+	at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb0_device);
-	at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+	at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb1_device);
 }
 #else
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 211c5c14a1e6..6a9d24e5ed8e 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -242,11 +242,6 @@ static struct at91_gpio_bank at91sam9rl_gpio[] = {
 	}
 };
 
-static void at91sam9rl_reset(void)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
 static void at91sam9rl_poweroff(void)
 {
 	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
@@ -281,7 +276,7 @@ void __init at91sam9rl_initialize(unsigned long main_clock)
 	/* Map SRAM */
 	iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
 
-	at91_arch_reset = at91sam9rl_reset;
+	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9rl_poweroff;
 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 9b27d167bff0..46bdc82d3fbf 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -92,8 +92,6 @@ static void __init onearm_board_init(void)
 
 MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= onearm_map_io,
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 50667bed7cc9..cba7f7771fee 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -218,8 +218,6 @@ static void __init afeb9260_board_init(void)
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= afeb9260_map_io,
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
index 5daff277f53e..3929f1c9e4e5 100644
--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
+++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
@@ -216,7 +216,7 @@ static struct atmel_nand_data __initdata eb_nand_data = {
 /*	.rdy_pin	= AT91_PIN_PC16, */
 	.enable_pin	= AT91_PIN_PA15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
@@ -318,8 +318,6 @@ static void __init eb_board_init(void)
 
 MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
 	/* Maintainer: Atmel <costa.antonior@gmail.com> */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= eb_map_io,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 02138af631e7..b54e3e6fceb6 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -75,7 +75,7 @@ static struct at91_usbh_data __initdata cam60_usbh_data = {
  * SPI devices.
  */
 #if defined(CONFIG_MTD_DATAFLASH)
-static struct mtd_partition __initdata cam60_spi_partitions[] = {
+static struct mtd_partition cam60_spi_partitions[] = {
 	{
 		.name	= "BOOT1",
 		.offset	= 0,
@@ -98,14 +98,14 @@ static struct mtd_partition __initdata cam60_spi_partitions[] = {
 	},
 };
 
-static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
+static struct flash_platform_data cam60_spi_flash_platform_data = {
 	.name		= "spi_flash",
 	.parts		= cam60_spi_partitions,
 	.nr_parts	= ARRAY_SIZE(cam60_spi_partitions)
 };
 #endif
 
-static struct spi_board_info cam60_spi_devices[] = {
+static struct spi_board_info cam60_spi_devices[] __initdata = {
 #if defined(CONFIG_MTD_DATAFLASH)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
@@ -198,8 +198,6 @@ static void __init cam60_board_init(void)
 
 MACHINE_START(CAM60, "KwikByte CAM60")
 	/* Maintainer: KwikByte */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= cam60_map_io,
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index d6940870e403..e7274440ead9 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -399,8 +399,6 @@ static void __init cap9adk_board_init(void)
 
 MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
 	/* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= cap9adk_map_io,
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index db1f9544d2e0..2e74a19874d1 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -162,8 +162,6 @@ static void __init carmeva_board_init(void)
 
 MACHINE_START(CARMEVA, "Carmeva")
 	/* Maintainer: Conitec Datasystems */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= carmeva_map_io,
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 4bc2e9f6ebb5..3838594578f3 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -375,8 +375,6 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260")
 MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 #endif
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= cpu9krea_map_io,
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index a28d99656190..2f4dd8cdd484 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -175,8 +175,6 @@ static void __init cpuat91_board_init(void)
 
 MACHINE_START(CPUAT91, "Eukrea")
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= cpuat91_map_io,
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index fea2529ebcf9..464839dc39bd 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -257,8 +257,6 @@ static void __init csb337_board_init(void)
 
 MACHINE_START(CSB337, "Cogent CSB337")
 	/* Maintainer: Bill Gatliff */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= csb337_map_io,
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index cfa3f04b2205..431688c61412 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -138,8 +138,6 @@ static void __init csb637_board_init(void)
 
 MACHINE_START(CSB637, "Cogent CSB637")
 	/* Maintainer: Bill Gatliff */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= csb637_map_io,
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 0fd0f5bc77ea..e14f0e165680 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -225,8 +225,6 @@ static void __init dk_board_init(void)
 
 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
 	/* Maintainer: SAN People/Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= dk_map_io,
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 528656761ff7..6cf6566ae346 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -120,8 +120,6 @@ static void __init eb9200_board_init(void)
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= eb9200_map_io,
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 1d69908617f0..7b58c948a957 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -168,8 +168,6 @@ static void __init ecb_at91board_init(void)
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
 	/* Maintainer: emQbit.com */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= ecb_at91map_io,
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 295a96609e71..a158a0ce458f 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -148,8 +148,6 @@ static void __init eco920_board_init(void)
 
 MACHINE_START(ECO920, "eco920")
 	/* Maintainer: Sascha Hauer */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= eco920_map_io,
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 4cdfaac8e590..56e92c4bbc2a 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -191,8 +191,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
 	/* Maintainer: SAN People/Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
new file mode 100644
index 000000000000..c8a62dc8fa65
--- /dev/null
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -0,0 +1,162 @@
+/*
+ * linux/arch/arm/mach-at91/board-flexibity.c
+ *
+ *  Copyright (C) 2010 Flexibity
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+
+#include "generic.h"
+
+static void __init flexibity_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init flexibity_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+/* USB Host port */
+static struct at91_usbh_data __initdata flexibity_usbh_data = {
+	.ports		= 2,
+};
+
+/* USB Device port */
+static struct at91_udc_data __initdata flexibity_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+/* SPI devices */
+static struct spi_board_info flexibity_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+};
+
+/* MCI (SD/MMC) */
+static struct at91_mmc_data __initdata flexibity_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PC9,
+	.wp_pin		= AT91_PIN_PC4,
+};
+
+/* LEDs */
+static struct gpio_led flexibity_leds[] = {
+	{
+		.name			= "usb1:green",
+		.gpio			= AT91_PIN_PA12,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb1:red",
+		.gpio			= AT91_PIN_PA13,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb2:green",
+		.gpio			= AT91_PIN_PB26,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb2:red",
+		.gpio			= AT91_PIN_PB27,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb3:green",
+		.gpio			= AT91_PIN_PC8,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb3:red",
+		.gpio			= AT91_PIN_PC6,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb4:green",
+		.gpio			= AT91_PIN_PB4,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "usb4:red",
+		.gpio			= AT91_PIN_PB5,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
+	}
+};
+
+static void __init flexibity_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&flexibity_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&flexibity_udc_data);
+	/* SPI */
+	at91_add_device_spi(flexibity_spi_devices,
+		ARRAY_SIZE(flexibity_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(0, &flexibity_mmc_data);
+	/* LEDs */
+	at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
+}
+
+MACHINE_START(FLEXIBITY, "Flexibity Connect")
+	/* Maintainer: Maxim Osipov */
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= flexibity_map_io,
+	.init_irq	= flexibity_init_irq,
+	.init_machine	= flexibity_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index a87956c0a74f..c0ce79d431a0 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -99,8 +99,6 @@ static void __init kafa_board_init(void)
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
 	/* Maintainer: Sergei Sharonov */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= kafa_map_io,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index fe9b9913fa3c..a13d2063faff 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -136,8 +136,6 @@ static void __init kb9202_board_init(void)
 
 MACHINE_START(KB9200, "KB920x")
 	/* Maintainer: KwikByte, Inc. */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= kb9202_map_io,
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 7c1e382330fb..fe5f1d47e6e2 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -387,8 +387,6 @@ static void __init neocore926_board_init(void)
 
 MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
 	/* Maintainer: ADENEO */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= neocore926_map_io,
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
new file mode 100644
index 000000000000..bba5a560e02b
--- /dev/null
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -0,0 +1,322 @@
+/*
+ *  Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
+ *                     taskit GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/*
+ * copied and adjusted from board-stamp9g20.c
+ * by Peter Gsellmann <pgsellmann@portner-elektronik.at>
+ */
+
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/w1-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init pcontrol_g20_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
+						| ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485  X5 */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
+						| ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx)  9bit-Bus  Multidrop-mode  X4 */
+	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+
+static void __init init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB
+ */
+static struct atmel_nand_data __initdata nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+};
+
+/*
+ * Bus timings; unit = 7.57ns
+ */
+static struct sam9_smc_config __initdata nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 3,
+};
+
+static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
+	.ncs_read_setup		= 16,
+	.nrd_setup		= 18,
+	.ncs_write_setup	= 16,
+	.nwe_setup		= 18,
+
+	.ncs_read_pulse		= 63,
+	.nrd_pulse		= 55,
+	.ncs_write_pulse	= 63,
+	.nwe_pulse		= 55,
+
+	.read_cycle		= 127,
+	.write_cycle		= 127,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT
+			| AT91_SMC_DBW_8 | AT91_SMC_PS_4
+			| AT91_SMC_TDFMODE,
+	.tdf_cycles		= 3,
+}, {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 0,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 8,
+	.nrd_pulse		= 8,
+	.ncs_write_pulse	= 5,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 8,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT
+			| AT91_SMC_DBW_16 | AT91_SMC_PS_8
+			| AT91_SMC_TDFMODE,
+	.tdf_cycles		= 1,
+} };
+
+static void __init add_device_nand(void)
+{
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &nand_smc_config);
+	at91_add_device_nand(&nand_data);
+}
+
+
+static void __init add_device_pcontrol(void)
+{
+	/* configure chip-select 4 (IO compatible to 8051  X4 ) */
+	sam9_smc_configure(4, &pcontrol_smc_config[0]);
+	/* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A  D4 ) */
+	sam9_smc_configure(7, &pcontrol_smc_config[1]);
+}
+
+
+/*
+ * MCI (SD/MMC)
+ * det_pin, wp_pin and vcc_pin are not connected
+ */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static struct mci_platform_data __initdata mmc_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+	},
+};
+#else
+static struct at91_mmc_data __initdata mmc_data = {
+	.wire4		= 1,
+};
+#endif
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata usbh_data = {
+	.ports		= 2,
+};
+
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata pcontrol_g20_udc_data = {
+	.vbus_pin	= AT91_PIN_PA22,	/* Detect +5V bus voltage */
+	.pullup_pin	= AT91_PIN_PA4,		/* K-state, active low */
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata macb_data = {
+	.phy_irq_pin	= AT91_PIN_PA28,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * I2C devices: eeprom and phy/switch
+ */
+static struct i2c_board_info __initdata pcontrol_g20_i2c_devices[] = {
+{		/* D7  address width=2, 8KiB */
+	I2C_BOARD_INFO("24c64", 0x50)
+}, {		/* D8  address width=1, 1 byte has 32 bits! */
+	I2C_BOARD_INFO("lan9303", 0x0a)
+}, };
+
+
+/*
+ * LEDs
+ */
+static struct gpio_led pcontrol_g20_leds[] = {
+	{
+		.name			= "LED1",	/* red  H5 */
+		.gpio			= AT91_PIN_PB18,
+		.active_low		= 1,
+		.default_trigger	= "none",	/* supervisor */
+	}, {
+		.name			= "LED2",	/* yellow  H7 */
+		.gpio			= AT91_PIN_PB19,
+		.active_low		= 1,
+		.default_trigger	= "mmc0",	/* SD-card activity */
+	}, {
+		.name			= "LED3",	/* green  H2 */
+		.gpio			= AT91_PIN_PB20,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",	/* blinky */
+	}, {
+		.name			= "LED4",	/* red  H3 */
+		.gpio			= AT91_PIN_PC6,
+		.active_low		= 1,
+		.default_trigger	= "none",	/* connection lost */
+	}, {
+		.name			= "LED5",	/* yellow  H6 */
+		.gpio			= AT91_PIN_PC7,
+		.active_low		= 1,
+		.default_trigger	= "none",	/* unsent data */
+	}, {
+		.name			= "LED6",	/* green  H1 */
+		.gpio			= AT91_PIN_PC9,
+		.active_low		= 1,
+		.default_trigger	= "none",	/* snafu */
+	}
+};
+
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info pcontrol_g20_spi_devices[] = {
+	{
+		.modalias	= "spidev",	/* HMI port  X4 */
+		.chip_select	= 1,
+		.max_speed_hz	= 50 * 1000 * 1000,
+		.bus_num	= 0,
+	}, {
+		.modalias	= "spidev",	/* piggyback  A2 */
+		.chip_select	= 0,
+		.max_speed_hz	= 50 * 1000 * 1000,
+		.bus_num	= 1,
+	},
+};
+
+
+/*
+ * Dallas 1-Wire  DS2431
+ */
+static struct w1_gpio_platform_data w1_gpio_pdata = {
+	.pin		= AT91_PIN_PA29,
+	.is_open_drain	= 1,
+};
+
+static struct platform_device w1_device = {
+	.name			= "w1-gpio",
+	.id			= -1,
+	.dev.platform_data	= &w1_gpio_pdata,
+};
+
+static void add_wire1(void)
+{
+	at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
+	at91_set_multi_drive(w1_gpio_pdata.pin, 1);
+	platform_device_register(&w1_device);
+}
+
+
+static void __init pcontrol_g20_board_init(void)
+{
+	at91_add_device_serial();
+	add_device_nand();
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+	at91_add_device_mci(0, &mmc_data);
+#else
+	at91_add_device_mmc(0, &mmc_data);
+#endif
+	at91_add_device_usbh(&usbh_data);
+	at91_add_device_eth(&macb_data);
+	at91_add_device_i2c(pcontrol_g20_i2c_devices,
+		ARRAY_SIZE(pcontrol_g20_i2c_devices));
+	add_wire1();
+	add_device_pcontrol();
+	at91_add_device_spi(pcontrol_g20_spi_devices,
+		ARRAY_SIZE(pcontrol_g20_spi_devices));
+	at91_add_device_udc(&pcontrol_g20_udc_data);
+	at91_gpio_leds(pcontrol_g20_leds,
+		ARRAY_SIZE(pcontrol_g20_leds));
+	/* piggyback  A2 */
+	at91_set_gpio_output(AT91_PIN_PB31, 1);
+}
+
+
+MACHINE_START(PCONTROL_G20, "PControl G20")
+	/* Maintainer: pgsellmann@portner-elektronik.at */
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= pcontrol_g20_map_io,
+	.init_irq	= init_irq,
+	.init_machine	= pcontrol_g20_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 859727e7ea30..9d833bbc592d 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -156,8 +156,6 @@ static void __init picotux200_board_init(void)
 
 MACHINE_START(PICOTUX2XX, "picotux 200")
 	/* Maintainer: Kleinhenz Elektronik GmbH */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= picotux200_map_io,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 664938e8f661..69d15a875b66 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -268,8 +268,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
 	/* Maintainer: calao-systems */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index b48346977534..25a26beaa728 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -212,8 +212,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
 	/* Maintainer: Olimex */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index ba9d501b5c50..de1816e0e1d9 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -356,8 +356,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index c4c8865d52d7..14acc901e24c 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -93,11 +93,12 @@ static struct resource dm9000_resource[] = {
 		.start	= AT91_PIN_PC11,
 		.end	= AT91_PIN_PC11,
 		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
 static struct dm9000_plat_data dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
+	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device dm9000_device = {
@@ -168,17 +169,6 @@ static struct at91_udc_data __initdata ek_udc_data = {
 
 
 /*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-//	.det_pin	= ... not connected
-//	.wp_pin		= ... not connected
-//	.vcc_pin	= ... not connected
-};
-
-
-/*
  * NAND flash
  */
 static struct mtd_partition __initdata ek_nand_partition[] = {
@@ -246,6 +236,10 @@ static void __init ek_add_device_nand(void)
 	at91_add_device_nand(&ek_nand_data);
 }
 
+/*
+ * SPI related devices
+ */
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 
 /*
  * ADS7846 Touchscreen
@@ -356,6 +350,19 @@ static struct spi_board_info ek_spi_devices[] = {
 #endif
 };
 
+#else /* CONFIG_SPI_ATMEL_* */
+/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */
+
+/*
+ * MCI (SD/MMC)
+ * det_pin, wp_pin and vcc_pin are not connected
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+};
+
+#endif /* CONFIG_SPI_ATMEL_* */
+
 
 /*
  * LCD Controller
@@ -616,8 +623,6 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 2d867fb0630f..bfe490df58be 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -454,8 +454,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
deleted file mode 100644
index a4102d72cc9b..000000000000
--- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2008 Atmel
- *  Copyright (C) 2009 Rob Emanuele
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/clk.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-
-	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static void __init ek_init_irq(void)
-{
-	at91sam9260_init_interrupts(NULL);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= 0,		/* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 1,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PB0,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name   = "Bootstrap",
-		.offset = 0,
-		.size   = 4 * SZ_1M,
-	},
-	{
-		.name	= "Partition 1",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 60 * SZ_1M,
-	},
-	{
-		.name	= "Partition 2",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	/* setup bus-width (8 or 16) */
-	if (ek_nand_data.bus_width_16)
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- * wp_pin is not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata ek_mmc_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PC2,
-		.wp_pin		= -ENODEV,
-	},
-	.slot[1] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PC9,
-		.wp_pin		= -ENODEV,
-	},
-
-};
-#else
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,	/* Only one slot so use slot B */
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PC9,
-};
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* "bottom" led, green, userled1 to be defined */
-		.name			= "ds5",
-		.gpio			= AT91_PIN_PB8,
-		.active_low		= 1,
-		.default_trigger	= "none",
-	},
-	{	/* "power" led, yellow */
-		.name			= "ds1",
-		.gpio			= AT91_PIN_PB9,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c512", 0x50),
-	},
-};
-
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* NAND */
-	ek_add_device_nand();
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* MMC */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-	at91_add_device_mci(0, &ek_mmc_data);
-#else
-	at91_add_device_mmc(0, &ek_mmc_data);
-#endif
-	/* I2C */
-	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	/* PCK0 provides MCLK to the WM8731 */
-	at91_set_B_periph(AT91_PIN_PC1, 0);
-	/* SSC (for WM8731) */
-	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
-}
-
-MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
-	/* Maintainer: Rob Emanuele */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
-	.init_irq	= ek_init_irq,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index c11fd47aec5d..ca8198b3c168 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -27,6 +27,9 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/clk.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -44,6 +47,18 @@
 #include "sam9_smc.h"
 #include "generic.h"
 
+/*
+ * board revision encoding
+ * bit 0:
+ * 	0 => 1 sd/mmc slot
+ * 	1 => 2 sd/mmc slots connectors (board from revision C)
+ */
+#define HAVE_2MMC	(1 << 0)
+static int inline ek_have_2mmc(void)
+{
+	return machine_is_at91sam9g20ek_2mmc() || (system_rev & HAVE_2MMC);
+}
+
 
 static void __init ek_map_io(void)
 {
@@ -91,7 +106,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
+#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 1,
@@ -118,6 +133,13 @@ static struct at91_eth_data __initdata ek_macb_data = {
 	.is_rmii	= 1,
 };
 
+static void __init ek_add_device_macb(void)
+{
+	if (ek_have_2mmc())
+		ek_macb_data.phy_irq_pin = AT91_PIN_PB0;
+
+	at91_add_device_eth(&ek_macb_data);
+}
 
 /*
  * NAND flash
@@ -195,13 +217,36 @@ static void __init ek_add_device_nand(void)
 
 /*
  * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
+ * wp_pin and vcc_pin are not connected
  */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static struct mci_platform_data __initdata ek_mmc_data = {
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PC9,
+	},
+
+};
+#else
 static struct at91_mmc_data __initdata ek_mmc_data = {
-	.slot_b		= 1,
+	.slot_b		= 1,	/* Only one slot so use slot B */
 	.wire4		= 1,
+	.det_pin	= AT91_PIN_PC9,
 };
+#endif
 
+static void __init ek_add_device_mmc(void)
+{
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+	if (ek_have_2mmc()) {
+		ek_mmc_data.slot[0].bus_width = 4;
+		ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
+	}
+	at91_add_device_mci(0, &ek_mmc_data);
+#else
+	at91_add_device_mmc(0, &ek_mmc_data);
+#endif
+}
 
 /*
  * LEDs
@@ -220,6 +265,15 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+static void __init ek_add_device_gpio_leds(void)
+{
+	if (ek_have_2mmc()) {
+		ek_leds[0].gpio = AT91_PIN_PB8;
+		ek_leds[1].gpio = AT91_PIN_PB9;
+	}
+
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
 
 /*
  * GPIO Buttons
@@ -269,6 +323,46 @@ static void __init ek_add_device_buttons(void)
 static void __init ek_add_device_buttons(void) {}
 #endif
 
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("AVDD", "0-001b"),
+	REGULATOR_SUPPLY("HPVDD", "0-001b"),
+	REGULATOR_SUPPLY("DBVDD", "0-001b"),
+	REGULATOR_SUPPLY("DCVDD", "0-001b"),
+};
+
+static struct regulator_init_data ek_avdd_reg_init_data = {
+	.constraints	= {
+		.name	= "3V3",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = ek_audio_consumer_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config ek_vdd_pdata = {
+	.supply_name	= "board-3V3",
+	.microvolts	= 3300000,
+	.gpio		= -EINVAL,
+	.enabled_at_boot = 0,
+	.init_data	= &ek_avdd_reg_init_data,
+};
+static struct platform_device ek_voltage_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_vdd_pdata,
+	},
+};
+static void __init ek_add_regulators(void)
+{
+	platform_device_register(&ek_voltage_regulator);
+}
+#else
+static void __init ek_add_regulators(void) {}
+#endif
+
 
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
         {
@@ -293,13 +387,15 @@ static void __init ek_board_init(void)
 	/* NAND */
 	ek_add_device_nand();
 	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
+	ek_add_device_macb();
+	/* Regulators */
+	ek_add_regulators();
 	/* MMC */
-	at91_add_device_mmc(0, &ek_mmc_data);
+	ek_add_device_mmc();
 	/* I2C */
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	ek_add_device_gpio_leds();
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* PCK0 provides MCLK to the WM8731 */
@@ -310,8 +406,15 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
+
+MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
+	/* Maintainer: Atmel */
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ee800595594d..86ff4b52db32 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -24,7 +24,9 @@
 #include <linux/input.h>
 #include <linux/leds.h>
 #include <linux/clk.h>
+#include <linux/atmel-mci.h>
 
+#include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
 
 #include <asm/setup.h>
@@ -98,6 +100,25 @@ static struct spi_board_info ek_spi_devices[] = {
 
 
 /*
+ * MCI (SD/MMC)
+ */
+static struct mci_platform_data __initdata mci0_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PD10,
+	},
+};
+
+static struct mci_platform_data __initdata mci1_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= AT91_PIN_PD11,
+		.wp_pin		= AT91_PIN_PD29,
+	},
+};
+
+
+/*
  * MACB Ethernet device
  */
 static struct at91_eth_data __initdata ek_macb_data = {
@@ -135,7 +156,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC8,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
@@ -380,6 +401,9 @@ static void __init ek_board_init(void)
 	at91_add_device_usba(&ek_usba_udc_data);
 	/* SPI */
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* MMC */
+	at91_add_device_mci(0, &mci0_data);
+	at91_add_device_mci(1, &mci1_data);
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* NAND */
@@ -399,10 +423,8 @@ static void __init ek_board_init(void)
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
 }
 
-MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 7ac20f3a2067..3bf3408e94c1 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -329,8 +329,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
 	/* Maintainer: Atmel */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
new file mode 100644
index 000000000000..0a99b3cedd7a
--- /dev/null
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -0,0 +1,187 @@
+/*
+ * linux/arch/arm/mach-at91/board-snapper9260.c
+ *
+ *  Copyright (C) 2010 Bluewater System Ltd
+ *
+ * Author: Andre Renaud <andre@bluewatersys.com>
+ * Author: Ryan Mallon  <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+#define SNAPPER9260_IO_EXP_GPIO(x)	(NR_BUILTIN_GPIO + (x))
+
+static void __init snapper9260_map_io(void)
+{
+	at91sam9260_initialize(18432000);
+
+	/* Debug on ttyS0 */
+	at91_register_uart(0, 0, 0);
+	at91_set_serial_console(0);
+
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+}
+
+static void __init snapper9260_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+static struct at91_usbh_data __initdata snapper9260_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata snapper9260_udc_data = {
+	.vbus_pin		= SNAPPER9260_IO_EXP_GPIO(5),
+	.vbus_active_low	= 1,
+	.vbus_polled		= 1,
+};
+
+static struct at91_eth_data snapper9260_macb_data = {
+	.is_rmii	= 1,
+};
+
+static struct mtd_partition __initdata snapper9260_nand_partitions[] = {
+	{
+		.name	= "Preboot",
+		.offset	= 0,
+		.size	= SZ_128K,
+	},
+	{
+		.name	= "Bootloader",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	},
+	{
+		.name	= "Environment",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_128K,
+	},
+	{
+		.name	= "Kernel",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_4M,
+	},
+	{
+		.name	= "Filesystem",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init
+snapper9260_nand_partition_info(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(snapper9260_nand_partitions);
+	return snapper9260_nand_partitions;
+}
+
+static struct atmel_nand_data __initdata snapper9260_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.partition_info	= snapper9260_nand_partition_info,
+	.bus_width_16	= 0,
+};
+
+static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 0,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 0,
+
+	.ncs_read_pulse		= 5,
+	.nrd_pulse		= 2,
+	.ncs_write_pulse	= 5,
+	.nwe_pulse		= 2,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+				   AT91_SMC_EXNWMODE_DISABLE),
+	.tdf_cycles		= 1,
+};
+
+static struct pca953x_platform_data snapper9260_io_expander_data = {
+	.gpio_base		= SNAPPER9260_IO_EXP_GPIO(0),
+};
+
+static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
+	{
+		/* IO expander */
+		I2C_BOARD_INFO("max7312", 0x28),
+		.platform_data = &snapper9260_io_expander_data,
+	},
+	{
+		/* Audio codec */
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+	{
+		/* RTC */
+		I2C_BOARD_INFO("isl1208", 0x6f),
+	},
+};
+
+static void __init snapper9260_add_device_nand(void)
+{
+	at91_set_A_periph(AT91_PIN_PC14, 0);
+	sam9_smc_configure(3, &snapper9260_nand_smc_config);
+	at91_add_device_nand(&snapper9260_nand_data);
+}
+
+static void __init snapper9260_board_init(void)
+{
+	at91_add_device_i2c(snapper9260_i2c_devices,
+			    ARRAY_SIZE(snapper9260_i2c_devices));
+	at91_add_device_serial();
+	at91_add_device_usbh(&snapper9260_usbh_data);
+	at91_add_device_udc(&snapper9260_udc_data);
+	at91_add_device_eth(&snapper9260_macb_data);
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK |
+						 ATMEL_SSC_TD | ATMEL_SSC_RD));
+	snapper9260_add_device_nand();
+}
+
+MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= snapper9260_map_io,
+	.init_irq	= snapper9260_init_irq,
+	.init_machine	= snapper9260_board_init,
+MACHINE_END
+
+
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 87958274290f..5206eef4a67e 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -294,8 +294,6 @@ static void __init stamp9g20_board_init(void)
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= portuxg20_map_io,
@@ -305,8 +303,6 @@ MACHINE_END
 
 MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= stamp9g20_map_io,
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 905d6ef76807..07784baeae84 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -228,8 +228,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(USB_A9260, "CALAO USB_A9260")
 	/* Maintainer: calao-systems */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index b6a3480383e5..b614508931fd 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -244,8 +244,6 @@ static void __init ek_board_init(void)
 
 MACHINE_START(USB_A9263, "CALAO USB_A9263")
 	/* Maintainer: calao-systems */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
 	.map_io		= ek_map_io,
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index e22bf051f835..89df00a9d2f7 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -594,8 +594,6 @@ static void __init yl9200_board_init(void)
 
 MACHINE_START(YL9200, "uCdragon YL-9200")
 	/* Maintainer: S.Birtles */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
 	.map_io		= yl9200_map_io,
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 7f7da439341f..7525cee3983f 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -501,7 +501,8 @@ postcore_initcall(at91_clk_debugfs_init);
 int __init clk_register(struct clk *clk)
 {
 	if (clk_is_peripheral(clk)) {
-		clk->parent = &mck;
+		if (!clk->parent)
+			clk->parent = &mck;
 		clk->mode = pmc_periph_mode;
 		list_add_tail(&clk->node, &clocks);
 	}
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 65c3dc5ba0d0..0c66deb2db39 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -46,6 +46,9 @@ extern void __init at91_clock_associate(const char *id, struct device *dev, cons
 extern void at91_irq_suspend(void);
 extern void at91_irq_resume(void);
 
+/* reset */
+extern void at91sam9_alt_reset(void);
+
  /* GPIO */
 #define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
 #define AT91RM9200_BGA		4	/* AT91RM9200 BGA package has 4 banks */
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index d8c1ededaa75..9c6af9737485 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -84,7 +84,7 @@
  */
 #define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
 #define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
index 1499b1cbffdd..976f4a6c3353 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -15,7 +15,7 @@
 #ifndef AT91CAP9_DDRSDR_H
 #define AT91CAP9_DDRSDR_H
 
-#define AT91_DDRSDRC_MR		(AT91_DDRSDRC + 0x00)	/* Mode Register */
+#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
 #define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
 #define			AT91_DDRSDRC_MODE_NORMAL		0
 #define			AT91_DDRSDRC_MODE_NOP		1
@@ -25,10 +25,10 @@
 #define			AT91_DDRSDRC_MODE_EXT_LMR	5
 #define			AT91_DDRSDRC_MODE_DEEP		6
 
-#define AT91_DDRSDRC_RTR	(AT91_DDRSDRC + 0x04)	/* Refresh Timer Register */
+#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
 #define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
 
-#define AT91_DDRSDRC_CR		(AT91_DDRSDRC + 0x08)	/* Configuration Register */
+#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
 #define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
 #define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
 #define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
@@ -49,7 +49,7 @@
 #define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
 #define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
 
-#define AT91_DDRSDRC_T0PR	(AT91_DDRSDRC + 0x0C)	/* Timing 0 Register */
+#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
 #define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
 #define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
 #define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
@@ -59,13 +59,13 @@
 #define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
 #define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
 
-#define AT91_DDRSDRC_T1PR	(AT91_DDRSDRC + 0x10)	/* Timing 1 Register */
+#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
 #define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
 #define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
 #define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
 #define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
 
-#define AT91_DDRSDRC_LPR	(AT91_DDRSDRC + 0x18)	/* Low Power Register */
+#define AT91_DDRSDRC_LPR	0x18	/* Low Power Register */
 #define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
 #define			AT91_DDRSDRC_LPCB_DISABLE		0
 #define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
@@ -80,14 +80,14 @@
 #define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
 #define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
 
-#define AT91_DDRSDRC_MDR	(AT91_DDRSDRC + 0x1C)	/* Memory Device Register */
+#define AT91_DDRSDRC_MDR	0x1C	/* Memory Device Register */
 #define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
 #define			AT91_DDRSDRC_MD_DDR		2
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
 
-#define AT91_DDRSDRC_DLLR	(AT91_DDRSDRC + 0x20)	/* DLL Information Register */
+#define AT91_DDRSDRC_DLLR	0x20	/* DLL Information Register */
 #define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
 #define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
 #define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
@@ -98,5 +98,11 @@
 #define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
 #define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
 
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 43c396b9b4cb..4e79036d3b80 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -84,7 +84,7 @@
  * System Peripherals (offset from AT91_BASE_SYS)
  */
 #define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 87de8be17484..2b5618518129 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -68,7 +68,7 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
new file mode 100644
index 000000000000..d27b15ba8ebf
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -0,0 +1,130 @@
+/*
+ * Header file for the Atmel DDR/SDR SDRAM Controller
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ *	Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT91SAM9_DDRSDR_H
+#define AT91SAM9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
+#define		AT91_DDRSDRC_MODE	(0x7 << 0)		/* Command Mode */
+#define			AT91_DDRSDRC_MODE_NORMAL	0
+#define			AT91_DDRSDRC_MODE_NOP		1
+#define			AT91_DDRSDRC_MODE_PRECHARGE	2
+#define			AT91_DDRSDRC_MODE_LMR		3
+#define			AT91_DDRSDRC_MODE_REFRESH	4
+#define			AT91_DDRSDRC_MODE_EXT_LMR	5
+#define			AT91_DDRSDRC_MODE_DEEP		6
+
+#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
+#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
+#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
+#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
+#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
+#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
+#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
+#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
+#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
+#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
+#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_DDRSDRC_NR_11	(0 << 2)
+#define			AT91_DDRSDRC_NR_12	(1 << 2)
+#define			AT91_DDRSDRC_NR_13	(2 << 2)
+#define			AT91_DDRSDRC_NR_14	(3 << 2)
+#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
+#define			AT91_DDRSDRC_CAS_2	(2 << 4)
+#define			AT91_DDRSDRC_CAS_3	(3 << 4)
+#define			AT91_DDRSDRC_CAS_25	(6 << 4)
+#define		AT91_DDRSDRC_RST_DLL	(1 << 7)		/* Reset DLL */
+#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
+#define		AT91_DDRSDRC_DIS_DLL	(1 << 9)		/* Disable DLL */
+#define		AT91_DDRSDRC_OCD	(1 << 12)		/* Off-Chip Driver */
+#define		AT91_DDRSDRC_DQMS	(1 << 16)		/* Mask Data is Shared */
+#define		AT91_DDRSDRC_ACTBST	(1 << 18)		/* Active Bank X to Burst Stop Read Access Bank Y */
+
+#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
+#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
+#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
+#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
+#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
+#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
+#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
+#define		AT91_DDRSDRC_TWTR	(0x7 << 24)		/* Internal Write to Read delay */
+#define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay */
+#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
+#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
+#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
+#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
+#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
+
+#define AT91_DDRSDRC_T2PR	0x14	/* Timing 2 Register */
+#define		AT91_DDRSDRC_TXARD	(0xf  << 0)		/* Exit active power down delay to read command in mode "Fast Exit" */
+#define		AT91_DDRSDRC_TXARDS	(0xf  << 4)		/* Exit active power down delay to read command in mode "Slow Exit" */
+#define		AT91_DDRSDRC_TRPA	(0xf  << 8)		/* Row Precharge All delay */
+#define		AT91_DDRSDRC_TRTP	(0x7  << 12)		/* Read to Precharge delay */
+
+#define AT91_DDRSDRC_LPR	0x1C	/* Low Power Register */
+#define		AT91_DDRSDRC_LPCB	(3 << 0)		/* Low-power Configurations */
+#define			AT91_DDRSDRC_LPCB_DISABLE		0
+#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
+#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
+#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_DDRSDRC_CLKFR	(1 << 2)	/* Clock Frozen */
+#define		AT91_DDRSDRC_PASR	(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_DDRSDRC_TCSR	(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_DDRSDRC_DS		(3 << 10)	/* Drive Strength */
+#define		AT91_DDRSDRC_TIMEOUT	(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+#define		AT91_DDRSDRC_APDE	(1 << 16)	 /* Active power down exit time */
+#define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
+
+#define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
+#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_DDRSDRC_MD_SDR		0
+#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
+#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
+#define			AT91_DDRSDRC_MD_DDR2		6
+#define		AT91_DDRSDRC_DBW	(1 << 4)		/* Data Bus Width */
+#define			AT91_DDRSDRC_DBW_32BITS		(0 <<  4)
+#define			AT91_DDRSDRC_DBW_16BITS		(1 <<  4)
+
+#define AT91_DDRSDRC_DLL	0x24	/* DLL Information Register */
+#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
+#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
+#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
+#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
+
+#define AT91_DDRSDRC_HS		0x2C	/* High Speed Register */
+#define		AT91_DDRSDRC_DIS_ATCP_RD	(1 << 2)	/* Anticip read access is disabled */
+
+#define AT91_DDRSDRC_DELAY(n)	(0x30 + (0x4 * (n)))	/* Delay I/O Register n */
+
+#define AT91_DDRSDRC_WPMR	0xE4	/* Write Protect Mode Register */
+#define		AT91_DDRSDRC_WP		(1 << 0)		/* Write protect enable */
+#define		AT91_DDRSDRC_WPKEY	(0xffffff << 8)		/* Write protect key */
+#define		AT91_DDRSDRC_KEY	(0x444452 << 8)		/* Write protect key = "DDR" */
+
+#define AT91_DDRSDRC_WPSR	0xE8	/* Write Protect Status Register */
+#define		AT91_DDRSDRC_WPVS	(1 << 0)		/* Write protect violation status */
+#define		AT91_DDRSDRC_WPVSRC	(0xffff << 8)		/* Write protect violation source */
+
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index b7260389f7ca..100f5a592926 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -17,7 +17,7 @@
 #define AT91SAM9_SDRAMC_H
 
 /* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MR		0x00	/* SDRAM Controller Mode Register */
 #define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
 #define			AT91_SDRAMC_MODE_NORMAL		0
 #define			AT91_SDRAMC_MODE_NOP		1
@@ -27,10 +27,10 @@
 #define			AT91_SDRAMC_MODE_EXT_LMR	5
 #define			AT91_SDRAMC_MODE_DEEP		6
 
-#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_TR		0x04	/* SDRAM Controller Refresh Timer Register */
 #define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
 
-#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_CR		0x08	/* SDRAM Controller Configuration Register */
 #define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
 #define			AT91_SDRAMC_NC_8	(0 << 0)
 #define			AT91_SDRAMC_NC_9	(1 << 0)
@@ -57,7 +57,7 @@
 #define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
 #define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
 
-#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPR		0x10	/* SDRAM Controller Low Power Register */
 #define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
 #define			AT91_SDRAMC_LPCB_DISABLE		0
 #define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
@@ -71,16 +71,21 @@
 #define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
 #define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
 
-#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_IER		0x14	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		0x18	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		0x1C	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		0x20	/* SDRAM Controller Interrupt Status Register */
 #define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
 
-#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MDR		0x24	/* SDRAM Memory Device Register */
 #define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_SDRAMC_MD_SDRAM		0
 #define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
 
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_SDRAMC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_SDRAMC##num + reg, value)
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index fc2de6c09c86..87ba8517ad98 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -74,7 +74,7 @@
  */
 #define AT91_DMA	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index d34cdb8abdca..063ac44a0204 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -52,4 +52,10 @@
 #define AT91_DBGU_CIDR	(AT91_SF + 0)	/* CIDR in PS segment */
 #define AT91_DBGU_EXID	(AT91_SF + 4)	/* EXID in PS segment */
 
+/*
+ * Support defines for the simple Power Controller module.
+ */
+#define	AT91_PS_CR	(AT91_PS + 0)	/* PS Control register */
+#define	AT91_PS_CR_CPU	(1 << 0)	/* CPU clock disable bit */
+
 #endif /* AT91X40_H */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index df2ed848c9f8..58528aa9c8a8 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -44,6 +44,8 @@
  /* USB Device */
 struct at91_udc_data {
 	u8	vbus_pin;		/* high == host powering us */
+	u8	vbus_active_low;	/* vbus polarity */
+	u8	vbus_polled;		/* Use polling, not interrupt */
 	u8	pullup_pin;		/* active == D+ pulled up */
 	u8	pullup_active_low;	/* true == pullup_pin is active low */
 };
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 833659d1200a..3bef931d0b1c 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -52,6 +52,7 @@ static inline unsigned long at91_cpu_fully_identify(void)
 
 #define ARCH_EXID_AT91SAM9M11	0x00000001
 #define ARCH_EXID_AT91SAM9M10	0x00000002
+#define ARCH_EXID_AT91SAM9G46	0x00000003
 #define ARCH_EXID_AT91SAM9G45	0x00000004
 
 static inline unsigned long at91_exid_identify(void)
@@ -128,9 +129,18 @@ static inline unsigned long at91cap9_rev_identify(void)
 #ifdef CONFIG_ARCH_AT91SAM9G45
 #define cpu_is_at91sam9g45()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
 #define cpu_is_at91sam9g45es()	(at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
+#define cpu_is_at91sam9m10()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9M10))
+#define cpu_is_at91sam9m46()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9G46))
+#define cpu_is_at91sam9m11()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9M11))
 #else
 #define cpu_is_at91sam9g45()	(0)
 #define cpu_is_at91sam9g45es()	(0)
+#define cpu_is_at91sam9m10()	(0)
+#define cpu_is_at91sam9g46()	(0)
+#define cpu_is_at91sam9m11()	(0)
 #endif
 
 #ifdef CONFIG_ARCH_AT91CAP9
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 9e750a1c1b5a..0f959faf74a9 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,11 +14,9 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1						@ MMU enabled?
-	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
-	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
+	.macro	addruart, rp, rv
+	ldr	\rp, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
+	ldr	\rv, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 04c91e31c9c5..bfdd8ab26dc8 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -19,6 +19,7 @@
 #define PIN_BASE		NR_AIC_IRQS
 
 #define MAX_GPIO_BANKS		5
+#define NR_BUILTIN_GPIO		(PIN_BASE + (MAX_GPIO_BANKS * 32))
 
 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
 
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
index c80e090b3670..36af14bc13bb 100644
--- a/arch/arm/mach-at91/include/mach/system.h
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -28,17 +28,20 @@
 
 static inline void arch_idle(void)
 {
-#ifndef CONFIG_DEBUG_KERNEL
 	/*
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+#ifdef AT91_PS
+	at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
 #else
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+#endif
+#ifndef CONFIG_CPU_ARM920T
 	/*
 	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Unlike disabling the processor clock via the PMC (above)
-	 *  this allows the processor to be woken via JTAG.
+	 * Post-RM9200 processors need this in conjunction with the above
+	 * to save power when idle.
 	 */
 	cpu_do_idle();
 #endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 615668986480..dafbacc25eb1 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -258,16 +258,23 @@ static int at91_pm_enter(suspend_state_t state)
 			 * NOTE: the Wait-for-Interrupt instruction needs to be
 			 * in icache so no SDRAM accesses are needed until the
 			 * wakeup IRQ occurs and self-refresh is terminated.
+			 * For ARM 926 based chips, this requirement is weaker
+			 * as at91sam9 can access a RAM in self-refresh mode.
 			 */
-			asm("b 1f; .align 5; 1:");
-			asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
+			asm volatile (	"mov r0, #0\n\t"
+					"b 1f\n\t"
+					".align 5\n\t"
+					"1: mcr p15, 0, r0, c7, c10, 4\n\t"
+					: /* no output */
+					: /* no input */
+					: "r0");
 			saved_lpr = sdram_selfrefresh_enable();
-			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
+			wait_for_interrupt_enable();
 			sdram_selfrefresh_disable(saved_lpr);
 			break;
 
 		case PM_SUSPEND_ON:
-			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
+			cpu_do_idle();
 			break;
 
 		default:
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 08322c44df1a..ce9a20699111 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -21,6 +21,8 @@ static inline u32 sdram_selfrefresh_enable(void)
 }
 
 #define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+#define wait_for_interrupt_enable()		asm volatile ("mcr p15, 0, %0, c7, c0, 4" \
+								: : "r" (0))
 
 #elif defined(CONFIG_ARCH_AT91CAP9)
 #include <mach/at91cap9_ddrsdr.h>
@@ -30,14 +32,52 @@ static inline u32 sdram_selfrefresh_enable(void)
 {
 	u32 saved_lpr, lpr;
 
-	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+	saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
 
 	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
 	return saved_lpr;
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
+#define wait_for_interrupt_enable()		cpu_do_idle()
+
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static u32 saved_lpr1;
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	/* Those tow values allow us to delay self-refresh activation
+	 * to the maximum. */
+	u32 lpr0, lpr1;
+	u32 saved_lpr0;
+
+	saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+	lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+	lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+	lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+	/* self-refresh mode now */
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+	at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+
+	return saved_lpr0;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr0)	\
+	do { \
+		at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \
+	} while (0)
+#define wait_for_interrupt_enable()		cpu_do_idle()
 
 #else
 #include <mach/at91sam9_sdramc.h>
@@ -47,7 +87,6 @@ static inline u32 sdram_selfrefresh_enable(void)
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
  */
-#define	AT91_SDRAMC	AT91_SDRAMC0
 #warning Assuming EB1 SDRAM controller is *NOT* used
 #endif
 
@@ -55,13 +94,14 @@ static inline u32 sdram_selfrefresh_enable(void)
 {
 	u32 saved_lpr, lpr;
 
-	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+	saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
 
 	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
 	return saved_lpr;
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr)
+#define wait_for_interrupt_enable()		cpu_do_idle()
 
 #endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 9c5b48e68a71..f7922a436172 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -16,10 +16,12 @@
 #include <mach/hardware.h>
 #include <mach/at91_pmc.h>
 
-#ifdef CONFIG_ARCH_AT91RM9200
+#if defined(CONFIG_ARCH_AT91RM9200)
 #include <mach/at91rm9200_mc.h>
 #elif defined(CONFIG_ARCH_AT91CAP9)
 #include <mach/at91cap9_ddrsdr.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
 #else
 #include <mach/at91sam9_sdramc.h>
 #endif
@@ -30,7 +32,6 @@
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
  */
-#define AT91_SDRAMC	AT91_SDRAMC0
 #warning Assuming EB1 SDRAM controller is *NOT* used
 #endif
 
@@ -113,34 +114,50 @@ ENTRY(at91_slow_clock)
 	/*
 	 * Register usage:
 	 *  R1 = Base address of AT91_PMC
-	 *  R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
+	 *  R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
 	 *  R3 = temporary register
 	 *  R4 = temporary register
+	 *  R5 = Base address of second RAM Controller or 0 if not present
 	 */
 	ldr	r1, .at91_va_base_pmc
 	ldr	r2, .at91_va_base_sdramc
+	ldr	r5, .at91_va_base_ramc1
 
 	/* Drain write buffer */
+	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4
 
 #ifdef CONFIG_ARCH_AT91RM9200
 	/* Put SDRAM in self-refresh mode */
 	mov	r3, #1
 	str	r3, [r2, #AT91_SDRAMC_SRR]
-#elif defined(CONFIG_ARCH_AT91CAP9)
-	/* Enable SDRAM self-refresh mode */
-	ldr	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-	str	r3, .saved_sam9_lpr
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 
-	mov	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	/* prepare for DDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
+	str	r3, .saved_sam9_lpr
+	bic	r3, #AT91_DDRSDRC_LPCB
+	orr	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* figure out if we use the second ram controller */
+	cmp	r5, #0
+	ldrne	r4, [r5, #AT91_DDRSDRC_LPR]
+	strne	r4, .saved_sam9_lpr1
+	bicne	r4, #AT91_DDRSDRC_LPCB
+	orrne	r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* Enable DDRAM self-refresh mode */
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+	strne	r4, [r5, #AT91_DDRSDRC_LPR]
 #else
 	/* Enable SDRAM self-refresh mode */
-	ldr	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	ldr	r3, [r2, #AT91_SDRAMC_LPR]
 	str	r3, .saved_sam9_lpr
 
-	mov	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	bic	r3, #AT91_SDRAMC_LPCB
+	orr	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_SDRAMC_LPR]
 #endif
 
 	/* Save Master clock setting */
@@ -247,14 +264,21 @@ ENTRY(at91_slow_clock)
 
 #ifdef CONFIG_ARCH_AT91RM9200
 	/* Do nothing - self-refresh is automatically disabled. */
-#elif defined(CONFIG_ARCH_AT91CAP9)
-	/* Restore LPR on AT91CAP9 */
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
+	/* Restore LPR on AT91 with DDRAM */
 	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	/* if we use the second ram controller */
+	cmp	r5, #0
+	ldrne	r4, .saved_sam9_lpr1
+	strne	r4, [r5, #AT91_DDRSDRC_LPR]
+
 #else
-	/* Restore LPR on AT91SAM9 */
+	/* Restore LPR on AT91 with SDRAM */
 	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	str	r3, [r2, #AT91_SDRAMC_LPR]
 #endif
 
 	/* Restore registers, and return */
@@ -273,18 +297,29 @@ ENTRY(at91_slow_clock)
 .saved_sam9_lpr:
 	.word 0
 
+.saved_sam9_lpr1:
+	.word 0
+
 .at91_va_base_pmc:
 	.word AT91_VA_BASE_SYS + AT91_PMC
 
 #ifdef CONFIG_ARCH_AT91RM9200
 .at91_va_base_sdramc:
 	.word AT91_VA_BASE_SYS
-#elif defined(CONFIG_ARCH_AT91CAP9)
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 .at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS + AT91_DDRSDRC
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
 #else
 .at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS + AT91_SDRAMC
+	.word AT91_VA_BASE_SYS + AT91_SDRAMC0
+#endif
+
+.at91_va_base_ramc1:
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC1
+#else
+	.word 0
 #endif
 
 ENTRY(at91_slow_clock_sz)
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 2f139196d63d..73eb066d2329 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -167,8 +167,6 @@ static void __init bcmring_fixup(struct machine_desc *desc,
 
 MACHINE_START(BCMRING, "BCMRING")
 	/* Maintainer: Broadcom Corporation */
-	.phys_io = MM_IO_START,
-	.io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc,
 	.fixup = bcmring_fixup,
 	.map_io = bcmring_map_io,
 	.init_irq = bcmring_init_irq,
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 72e405df0fb0..d3f959e92b2d 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -91,14 +91,23 @@ static struct clk uart_clk = {
 	.parent = &pll1_clk,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name = "BUSCLK",
+	.type = CLK_TYPE_PRIMARY,
+	.mode = CLK_MODE_XTAL,
+};
+
 static struct clk_lookup lookups[] = {
-	{			/* UART0 */
-	 .dev_id = "uarta",
-	 .clk = &uart_clk,
-	 }, {			/* UART1 */
-	     .dev_id = "uartb",
-	     .clk = &uart_clk,
-	     }
+	{			/* Bus clock */
+		.con_id = "apb_pclk",
+		.clk = &dummy_apb_pclk,
+	}, {			/* UART0 */
+		.dev_id = "uarta",
+		.clk = &uart_clk,
+	}, {			/* UART1 */
+		.dev_id = "uartb",
+		.clk = &uart_clk,
+	}
 };
 
 static struct amba_device *amba_devs[] __initdata = {
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 29c0a911df26..77eb35c89cd0 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -691,7 +691,7 @@ int dma_init(void)
 
 	memset(&gDMA, 0, sizeof(gDMA));
 
-	init_MUTEX_LOCKED(&gDMA.lock);
+	sema_init(&gDMA.lock, 0);
 	init_waitqueue_head(&gDMA.freeChannelQ);
 
 	/* Initialize the Hardware */
@@ -1574,7 +1574,7 @@ int dma_init_mem_map(DMA_MemMap_t *memMap)
 {
 	memset(memMap, 0, sizeof(*memMap));
 
-	init_MUTEX(&memMap->lock);
+	sema_init(&memMap->lock, 1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
index 35e2ead8395c..3db3a09fd398 100644
--- a/arch/arm/mach-bcmring/include/mach/vmalloc.h
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -22,4 +22,4 @@
  * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
  * larger physical memory designs better.
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
+#define VMALLOC_END       0xf0000000
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
index dc1c4939b0ce..e3152631eb37 100644
--- a/arch/arm/mach-bcmring/irq.c
+++ b/arch/arm/mach-bcmring/irq.c
@@ -67,21 +67,21 @@ static void bcmring_unmask_irq2(unsigned int irq)
 }
 
 static struct irq_chip bcmring_irq0_chip = {
-	.typename = "ARM-INTC0",
+	.name = "ARM-INTC0",
 	.ack = bcmring_mask_irq0,
 	.mask = bcmring_mask_irq0,	/* mask a specific interrupt, blocking its delivery. */
 	.unmask = bcmring_unmask_irq0,	/* unmaks an interrupt */
 };
 
 static struct irq_chip bcmring_irq1_chip = {
-	.typename = "ARM-INTC1",
+	.name = "ARM-INTC1",
 	.ack = bcmring_mask_irq1,
 	.mask = bcmring_mask_irq1,
 	.unmask = bcmring_unmask_irq1,
 };
 
 static struct irq_chip bcmring_irq2_chip = {
-	.typename = "ARM-SINTC",
+	.name = "ARM-SINTC",
 	.ack = bcmring_mask_irq2,
 	.mask = bcmring_mask_irq2,
 	.unmask = bcmring_unmask_irq2,
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index dbaae5f746a1..eb34bd1251d4 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -30,7 +30,6 @@ config ARCH_CLEP7312
 config ARCH_EDB7211
 	bool "EDB7211"
 	select ISA
-	select ARCH_DISCONTIGMEM_ENABLE
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_SELECT_MEMORY_MODEL
 	help
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 5f18eccdc725..4a74b2c959bd 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -64,8 +64,6 @@ void __init autcpu12_map_io(void)
 
 MACHINE_START(AUTCPU12, "autronix autcpu12")
 	/* Maintainer: Thomas Gleixner */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0020000,
 	.map_io		= autcpu12_map_io,
 	.init_irq	= clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 71a80b5b8ad6..5a1689d48793 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -55,8 +55,6 @@ static void __init cdb89712_map_io(void)
 
 MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	/* Maintainer: Ray Lehtiniemi */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= cdb89712_map_io,
 	.init_irq	= clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 8ada20184978..16481cf3e931 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -56,8 +56,6 @@ static void __init ceiva_map_io(void)
 
 MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
 	/* Maintainer: Rob Scott */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= ceiva_map_io,
 	.init_irq	= clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 09fb57e45213..67b5abb4a60a 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -32,14 +32,11 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags,
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xc0000000;
 	mi->bank[0].size = 0x01000000;
-	mi->bank[0].node = 0;
 }
 
 
 MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	/* Maintainer: Nobody */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.fixup		= fixup_clep7312,
 	.map_io		= clps711x_map_io,
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index dc81cc68595d..98ca5b2e940d 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
+#include <linux/memblock.h>
 #include <linux/types.h>
 #include <linux/string.h>
 
@@ -29,6 +30,12 @@
 
 extern void edb7211_map_io(void);
 
+/* Reserve screen memory region at the start of main system memory. */
+static void __init edb7211_reserve(void)
+{
+	memblock_reserve(PHYS_OFFSET, 0x00020000);
+}
+
 static void __init
 fixup_edb7211(struct machine_desc *desc, struct tag *tags,
 	      char **cmdline, struct meminfo *mi)
@@ -43,20 +50,17 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags,
 	 */
 	mi->bank[0].start = 0xc0000000;
 	mi->bank[0].size = 8*1024*1024;
-	mi->bank[0].node = 0;
 	mi->bank[1].start = 0xc1000000;
 	mi->bank[1].size = 8*1024*1024;
-	mi->bank[1].node = 1;
 	mi->nr_banks = 2;
 }
 
 MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	/* Maintainer: Jon McClintock */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0020100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
 	.fixup		= fixup_edb7211,
 	.map_io		= edb7211_map_io,
+	.reserve	= edb7211_reserve,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index 7430e4049d87..b1cb479e71e9 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -39,7 +39,6 @@ struct meminfo memmap = {
 		{
 			.start	= 0xC0000000,
 			.size	= 0x01000000,
-			.node	= 0
 		},
 	},
 };
@@ -76,8 +75,6 @@ fortunet_fixup(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(FORTUNET, "ARM-FortuNet")
 	/* Maintainer: FortuNet Inc. */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000000,
 	.fixup		= fortunet_fixup,
 	.map_io		= clps711x_map_io,
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 072cc6b61ba3..507c6873b7ee 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -14,16 +14,14 @@
 #include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #CLPS7111_PHYS_BASE
-		movne	\rx, #CLPS7111_VIRT_BASE
+		.macro	addruart, rp, rv
 #ifndef CONFIG_DEBUG_CLPS711X_UART2
-		add	\rx, \rx, #0x0000	@ UART1
+		mov	\rp, #0x0000	@ UART1
 #else
-		add	\rx, \rx, #0x1000	@ UART2
+		mov	\rp, #0x1000	@ UART2
 #endif
+		orr	\rv, \rp, #CLPS7111_VIRT_BASE
+		orr	\rp, \rp, #CLPS7111_PHYS_BASE
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index b3ebe9e4871f..d0b7d870be9c 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -69,13 +69,6 @@
 #define SYSPLD_VIRT_BASE	0xfe000000
 #define SYSPLD_BASE		SYSPLD_VIRT_BASE
 
-#ifndef __ASSEMBLER__
-
-#define PCIO_BASE		IO_BASE
-
-#endif
-
-
 #if  defined (CONFIG_ARCH_AUTCPU12)
 
 #define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
index f70d52be48a2..f45c8e892cb5 100644
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -20,7 +20,6 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-
 /*
  * Physical DRAM offset.
  */
@@ -72,7 +71,6 @@
  * 	node 2:  0xd0000000 - 0xd7ffffff
  * 	node 3:  0xd8000000 - 0xdfffffff
  */
-#define NODE_MEM_SIZE_BITS	24
 #define SECTION_SIZE_BITS	24
 #define MAX_PHYSMEM_BITS	32
 
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
index ea6cc7beff28..30b3a287ed88 100644
--- a/arch/arm/mach-clps711x/include/mach/vmalloc.h
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 0d94a30fd6fc..cefbce0480b9 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -89,8 +89,6 @@ static void __init p720t_map_io(void)
 
 MACHINE_START(P720T, "ARM-Prospector720T")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.fixup		= fixup_p720t,
 	.map_io		= p720t_map_io,
diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile
index 427507a2d696..11033f1c2e23 100644
--- a/arch/arm/mach-cns3xxx/Makefile
+++ b/arch/arm/mach-cns3xxx/Makefile
@@ -1,2 +1,3 @@
-obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o
+obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o devices.o
+obj-$(CONFIG_PCI)			+= pcie.o
 obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 2e30c8288740..90fe9ab8591d 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -32,6 +32,7 @@
 #include <mach/cns3xxx.h>
 #include <mach/irqs.h>
 #include "core.h"
+#include "devices.h"
 
 /*
  * NOR Flash
@@ -117,6 +118,9 @@ static void __init cns3420_init(void)
 {
 	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
 
+	cns3xxx_ahci_init();
+	cns3xxx_sdhci_init();
+
 	pm_power_off = cns3xxx_power_off;
 }
 
@@ -138,8 +142,6 @@ static void __init cns3420_map_io(void)
 }
 
 MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
-	.phys_io	= CNS3XXX_UART0_BASE,
-	.io_pg_offst	= (CNS3XXX_UART0_BASE_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
new file mode 100644
index 000000000000..50b4d31c27c0
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/devices.c
@@ -0,0 +1,111 @@
+/*
+ * CNS3xxx common devices
+ *
+ * Copyright 2008 Cavium Networks
+ *		  Scott Shu
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/compiler.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <mach/cns3xxx.h>
+#include <mach/irqs.h>
+#include "core.h"
+#include "devices.h"
+
+/*
+ * AHCI
+ */
+static struct resource cns3xxx_ahci_resource[] = {
+	[0] = {
+		.start	= CNS3XXX_SATA2_BASE,
+		.end	= CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_CNS3XXX_SATA,
+		.end	= IRQ_CNS3XXX_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device cns3xxx_ahci_pdev = {
+	.name		= "ahci",
+	.id		= 0,
+	.resource	= cns3xxx_ahci_resource,
+	.num_resources	= ARRAY_SIZE(cns3xxx_ahci_resource),
+	.dev		= {
+		.dma_mask		= &cns3xxx_ahci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init cns3xxx_ahci_init(void)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(MISC_SATA_POWER_MODE);
+	tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
+	tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
+	__raw_writel(tmp, MISC_SATA_POWER_MODE);
+
+	/* Enable SATA PHY */
+	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
+	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
+
+	/* Enable SATA Clock */
+	cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
+
+	/* De-Asscer SATA Reset */
+	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
+
+	platform_device_register(&cns3xxx_ahci_pdev);
+}
+
+/*
+ * SDHCI
+ */
+static struct resource cns3xxx_sdhci_resources[] = {
+	[0] = {
+		.start = CNS3XXX_SDIO_BASE,
+		.end   = CNS3XXX_SDIO_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CNS3XXX_SDIO,
+		.end   = IRQ_CNS3XXX_SDIO,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cns3xxx_sdhci_pdev = {
+	.name		= "sdhci-cns3xxx",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cns3xxx_sdhci_resources),
+	.resource	= cns3xxx_sdhci_resources,
+};
+
+void __init cns3xxx_sdhci_init(void)
+{
+	u32 __iomem *gpioa = __io(CNS3XXX_MISC_BASE_VIRT + 0x0014);
+	u32 gpioa_pins = __raw_readl(gpioa);
+
+	/* MMC/SD pins share with GPIOA */
+	gpioa_pins |= 0x1fff0004;
+	__raw_writel(gpioa_pins, gpioa);
+
+	cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
+	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
+
+	platform_device_register(&cns3xxx_sdhci_pdev);
+}
diff --git a/arch/arm/mach-cns3xxx/devices.h b/arch/arm/mach-cns3xxx/devices.h
new file mode 100644
index 000000000000..27e15a10aa85
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/devices.h
@@ -0,0 +1,20 @@
+/*
+ * CNS3xxx common devices
+ *
+ * Copyright 2008 Cavium Networks
+ *		  Scott Shu
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CNS3XXX_DEVICES_H_
+#define __CNS3XXX_DEVICES_H_
+
+void __init cns3xxx_ahci_init(void);
+void __init cns3xxx_sdhci_init(void);
+
+#endif /* __CNS3XXX_DEVICES_H_ */
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
index 8a2f5a21d4ee..6dbce13771ca 100644
--- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -247,37 +247,36 @@
  * Misc block
  */
 #define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
-#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + (offset))))
-
-#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP_VALUE(0x00)
-#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP_VALUE(0x04)
-#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP_VALUE(0x08)
-#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP_VALUE(0x0C)
-#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP_VALUE(0x10)
-#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP_VALUE(0x14)
-#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP_VALUE(0x18)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP_VALUE(0x1C)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP_VALUE(0x20)
-#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x24)
-#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x28)
-#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x2C)
-#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x30)
-#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP_VALUE(0x34)
-#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP_VALUE(0x40)
-#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP_VALUE(0x44)
-#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP_VALUE(0x48)
-#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP_VALUE(0x4C)
-#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP_VALUE(0x50)
-#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP_VALUE(0x54)
-
-#define MISC_SATA_POWER_MODE			MISC_MEM_MAP_VALUE(0x310)
-
-#define MISC_USB_CFG_REG			MISC_MEM_MAP_VALUE(0x800)
-#define MISC_USB_STS_REG			MISC_MEM_MAP_VALUE(0x804)
-#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP_VALUE(0x808)
-#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP_VALUE(0x80c)
-#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP_VALUE(0x810)
-#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP_VALUE(0x814)
+
+#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP(0x00)
+#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP(0x04)
+#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP(0x08)
+#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP(0x0C)
+#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP(0x10)
+#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP(0x14)
+#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP(0x18)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP(0x1C)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP(0x20)
+#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x24)
+#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x28)
+#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x2C)
+#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x30)
+#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP(0x34)
+#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP(0x40)
+#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP(0x44)
+#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP(0x48)
+#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP(0x4C)
+#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP(0x50)
+#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP(0x54)
+
+#define MISC_SATA_POWER_MODE			MISC_MEM_MAP(0x310)
+
+#define MISC_USB_CFG_REG			MISC_MEM_MAP(0x800)
+#define MISC_USB_STS_REG			MISC_MEM_MAP(0x804)
+#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP(0x808)
+#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP(0x80c)
+#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP(0x810)
+#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP(0x814)
 
 #define MISC_PCIEPHY_CMCTL(x)			MISC_MEM_MAP(0x900 + (x) * 0x004)
 #define MISC_PCIEPHY_CTL(x)			MISC_MEM_MAP(0x940 + (x) * 0x100)
@@ -300,21 +299,21 @@
 /*
  * Power management and clock control
  */
-#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT + (offset))))
-
-#define PM_CLK_GATE_REG					PMU_REG_VALUE(0x000)
-#define PM_SOFT_RST_REG					PMU_REG_VALUE(0x004)
-#define PM_HS_CFG_REG					PMU_REG_VALUE(0x008)
-#define PM_CACTIVE_STA_REG				PMU_REG_VALUE(0x00C)
-#define PM_PWR_STA_REG					PMU_REG_VALUE(0x010)
-#define PM_CLK_CTRL_REG					PMU_REG_VALUE(0x014)
-#define PM_PLL_LCD_I2S_CTRL_REG				PMU_REG_VALUE(0x018)
-#define PM_PLL_HM_PD_CTRL_REG				PMU_REG_VALUE(0x01C)
-#define PM_REGULAT_CTRL_REG				PMU_REG_VALUE(0x020)
-#define PM_WDT_CTRL_REG					PMU_REG_VALUE(0x024)
-#define PM_WU_CTRL0_REG					PMU_REG_VALUE(0x028)
-#define PM_WU_CTRL1_REG					PMU_REG_VALUE(0x02C)
-#define PM_CSR_REG					PMU_REG_VALUE(0x030)
+#define PMU_MEM_MAP(offs) (void __iomem *)(CNS3XXX_PM_BASE_VIRT + (offs))
+
+#define PM_CLK_GATE_REG					PMU_MEM_MAP(0x000)
+#define PM_SOFT_RST_REG					PMU_MEM_MAP(0x004)
+#define PM_HS_CFG_REG					PMU_MEM_MAP(0x008)
+#define PM_CACTIVE_STA_REG				PMU_MEM_MAP(0x00C)
+#define PM_PWR_STA_REG					PMU_MEM_MAP(0x010)
+#define PM_CLK_CTRL_REG					PMU_MEM_MAP(0x014)
+#define PM_PLL_LCD_I2S_CTRL_REG				PMU_MEM_MAP(0x018)
+#define PM_PLL_HM_PD_CTRL_REG				PMU_MEM_MAP(0x01C)
+#define PM_REGULAT_CTRL_REG				PMU_MEM_MAP(0x020)
+#define PM_WDT_CTRL_REG					PMU_MEM_MAP(0x024)
+#define PM_WU_CTRL0_REG					PMU_MEM_MAP(0x028)
+#define PM_WU_CTRL1_REG					PMU_MEM_MAP(0x02C)
+#define PM_CSR_REG					PMU_MEM_MAP(0x030)
 
 /* PM_CLK_GATE_REG */
 #define PM_CLK_GATE_REG_OFFSET_SDIO			(25)
diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
index d16ce7eb00e9..56d828634db5 100644
--- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
@@ -10,12 +10,10 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf0000000	@ virtual base
-		orr	\rx, \rx, #0x00009000
+		.macro	addruart,rp,rv
+		mov	\rp, #0x00009000
+		orr	\rv, \rp, #0xf0000000	@ virtual base
+		orr	\rp, \rp, #0x10000000
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
new file mode 100644
index 000000000000..38088c36936c
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -0,0 +1,389 @@
+/*
+ * PCI-E support for CNS3xxx
+ *
+ * Copyright 2008 Cavium Networks
+ *		  Richard Liu <richard.liu@caviumnetworks.com>
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <asm/mach/map.h>
+#include <mach/cns3xxx.h>
+#include "core.h"
+
+enum cns3xxx_access_type {
+	CNS3XXX_HOST_TYPE = 0,
+	CNS3XXX_CFG0_TYPE,
+	CNS3XXX_CFG1_TYPE,
+	CNS3XXX_NUM_ACCESS_TYPES,
+};
+
+struct cns3xxx_pcie {
+	struct map_desc cfg_bases[CNS3XXX_NUM_ACCESS_TYPES];
+	unsigned int irqs[2];
+	struct resource res_io;
+	struct resource res_mem;
+	struct hw_pci hw_pci;
+
+	bool linked;
+};
+
+static struct cns3xxx_pcie cns3xxx_pcie[]; /* forward decl. */
+
+static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata)
+{
+	struct pci_sys_data *root = sysdata;
+
+	return &cns3xxx_pcie[root->domain];
+}
+
+static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev)
+{
+	return sysdata_to_cnspci(dev->sysdata);
+}
+
+static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
+{
+	return sysdata_to_cnspci(bus->sysdata);
+}
+
+static void __iomem *cns3xxx_pci_cfg_base(struct pci_bus *bus,
+				  unsigned int devfn, int where)
+{
+	struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
+	int busno = bus->number;
+	int slot = PCI_SLOT(devfn);
+	int offset;
+	enum cns3xxx_access_type type;
+	void __iomem *base;
+
+	/* If there is no link, just show the CNS PCI bridge. */
+	if (!cnspci->linked && (busno > 0 || slot > 0))
+		return NULL;
+
+	/*
+	 * The CNS PCI bridge doesn't fit into the PCI hierarchy, though
+	 * we still want to access it. For this to work, we must place
+	 * the first device on the same bus as the CNS PCI bridge.
+	 */
+	if (busno == 0) {
+		if (slot > 1)
+			return NULL;
+		type = slot;
+	} else {
+		type = CNS3XXX_CFG1_TYPE;
+	}
+
+	base = (void __iomem *)cnspci->cfg_bases[type].virtual;
+	offset = ((busno & 0xf) << 20) | (devfn << 12) | (where & 0xffc);
+
+	return base + offset;
+}
+
+static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 *val)
+{
+	u32 v;
+	void __iomem *base;
+	u32 mask = (0x1ull << (size * 8)) - 1;
+	int shift = (where % 4) * 8;
+
+	base = cns3xxx_pci_cfg_base(bus, devfn, where);
+	if (!base) {
+		*val = 0xffffffff;
+		return PCIBIOS_SUCCESSFUL;
+	}
+
+	v = __raw_readl(base);
+
+	if (bus->number == 0 && devfn == 0 &&
+			(where & 0xffc) == PCI_CLASS_REVISION) {
+		/*
+		 * RC's class is 0xb, but Linux PCI driver needs 0x604
+		 * for a PCIe bridge. So we must fixup the class code
+		 * to 0x604 here.
+		 */
+		v &= 0xff;
+		v |= 0x604 << 16;
+	}
+
+	*val = (v >> shift) & mask;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int cns3xxx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+				    int where, int size, u32 val)
+{
+	u32 v;
+	void __iomem *base;
+	u32 mask = (0x1ull << (size * 8)) - 1;
+	int shift = (where % 4) * 8;
+
+	base = cns3xxx_pci_cfg_base(bus, devfn, where);
+	if (!base)
+		return PCIBIOS_SUCCESSFUL;
+
+	v = __raw_readl(base);
+
+	v &= ~(mask << shift);
+	v |= (val & mask) << shift;
+
+	__raw_writel(v, base);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+	struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys);
+	struct resource *res_io = &cnspci->res_io;
+	struct resource *res_mem = &cnspci->res_mem;
+	struct resource **sysres = sys->resource;
+
+	BUG_ON(request_resource(&iomem_resource, res_io) ||
+	       request_resource(&iomem_resource, res_mem));
+
+	sysres[0] = res_io;
+	sysres[1] = res_mem;
+
+	return 1;
+}
+
+static struct pci_ops cns3xxx_pcie_ops = {
+	.read = cns3xxx_pci_read_config,
+	.write = cns3xxx_pci_write_config,
+};
+
+static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	return pci_scan_bus(sys->busnr, &cns3xxx_pcie_ops, sys);
+}
+
+static int cns3xxx_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
+	int irq = cnspci->irqs[slot];
+
+	pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
+		pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
+		PCI_FUNC(dev->devfn), slot, pin, irq);
+
+	return irq;
+}
+
+static struct cns3xxx_pcie cns3xxx_pcie[] = {
+	[0] = {
+		.cfg_bases = {
+			[CNS3XXX_HOST_TYPE] = {
+				.virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG0_TYPE] = {
+				.virtual = CNS3XXX_PCIE0_CFG0_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG1_TYPE] = {
+				.virtual = CNS3XXX_PCIE0_CFG1_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+		},
+		.res_io = {
+			.name = "PCIe0 I/O space",
+			.start = CNS3XXX_PCIE0_IO_BASE,
+			.end = CNS3XXX_PCIE0_IO_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_IO,
+		},
+		.res_mem = {
+			.name = "PCIe0 non-prefetchable",
+			.start = CNS3XXX_PCIE0_MEM_BASE,
+			.end = CNS3XXX_PCIE0_MEM_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
+		.hw_pci = {
+			.domain = 0,
+			.swizzle = pci_std_swizzle,
+			.nr_controllers = 1,
+			.setup = cns3xxx_pci_setup,
+			.scan = cns3xxx_pci_scan_bus,
+			.map_irq = cns3xxx_pcie_map_irq,
+		},
+	},
+	[1] = {
+		.cfg_bases = {
+			[CNS3XXX_HOST_TYPE] = {
+				.virtual = CNS3XXX_PCIE1_HOST_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG0_TYPE] = {
+				.virtual = CNS3XXX_PCIE1_CFG0_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+			[CNS3XXX_CFG1_TYPE] = {
+				.virtual = CNS3XXX_PCIE1_CFG1_BASE_VIRT,
+				.pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
+				.length = SZ_16M,
+				.type = MT_DEVICE,
+			},
+		},
+		.res_io = {
+			.name = "PCIe1 I/O space",
+			.start = CNS3XXX_PCIE1_IO_BASE,
+			.end = CNS3XXX_PCIE1_IO_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_IO,
+		},
+		.res_mem = {
+			.name = "PCIe1 non-prefetchable",
+			.start = CNS3XXX_PCIE1_MEM_BASE,
+			.end = CNS3XXX_PCIE1_MEM_BASE + SZ_16M - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
+		.hw_pci = {
+			.domain = 1,
+			.swizzle = pci_std_swizzle,
+			.nr_controllers = 1,
+			.setup = cns3xxx_pci_setup,
+			.scan = cns3xxx_pci_scan_bus,
+			.map_irq = cns3xxx_pcie_map_irq,
+		},
+	},
+};
+
+static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci)
+{
+	int port = cnspci->hw_pci.domain;
+	u32 reg;
+	unsigned long time;
+
+	reg = __raw_readl(MISC_PCIE_CTRL(port));
+	/*
+	 * Enable Application Request to 1, it will exit L1 automatically,
+	 * but when chip back, it will use another clock, still can use 0x1.
+	 */
+	reg |= 0x3;
+	__raw_writel(reg, MISC_PCIE_CTRL(port));
+
+	pr_info("PCIe: Port[%d] Enable PCIe LTSSM\n", port);
+	pr_info("PCIe: Port[%d] Check data link layer...", port);
+
+	time = jiffies;
+	while (1) {
+		reg = __raw_readl(MISC_PCIE_PM_DEBUG(port));
+		if (reg & 0x1) {
+			pr_info("Link up.\n");
+			cnspci->linked = 1;
+			break;
+		} else if (time_after(jiffies, time + 50)) {
+			pr_info("Device not found.\n");
+			break;
+		}
+	}
+}
+
+static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
+{
+	int port = cnspci->hw_pci.domain;
+	struct pci_sys_data sd = {
+		.domain = port,
+	};
+	struct pci_bus bus = {
+		.number = 0,
+		.ops = &cns3xxx_pcie_ops,
+		.sysdata = &sd,
+	};
+	u32 io_base = cnspci->res_io.start >> 16;
+	u32 mem_base = cnspci->res_mem.start >> 16;
+	u32 host_base = cnspci->cfg_bases[CNS3XXX_HOST_TYPE].pfn;
+	u32 cfg0_base = cnspci->cfg_bases[CNS3XXX_CFG0_TYPE].pfn;
+	u32 devfn = 0;
+	u8 tmp8;
+	u16 pos;
+	u16 dc;
+
+	host_base = (__pfn_to_phys(host_base) - 1) >> 16;
+	cfg0_base = (__pfn_to_phys(cfg0_base) - 1) >> 16;
+
+	pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
+	pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
+	pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
+
+	pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8);
+	pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8);
+	pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8);
+
+	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, host_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
+	pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, cfg0_base);
+
+	if (!cnspci->linked)
+		return;
+
+	/* Set Device Max_Read_Request_Size to 128 byte */
+	devfn = PCI_DEVFN(1, 0);
+	pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
+	pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
+	dc &= ~(0x3 << 12);	/* Clear Device Control Register [14:12] */
+	pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
+	pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
+	if (!(dc & (0x3 << 12)))
+		pr_info("PCIe: Set Device Max_Read_Request_Size to 128 byte\n");
+
+	/* Disable PCIe0 Interrupt Mask INTA to INTD */
+	__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port));
+}
+
+static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
+				      struct pt_regs *regs)
+{
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+	return 0;
+}
+
+static int __init cns3xxx_pcie_init(void)
+{
+	int i;
+
+	hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
+			"imprecise external abort");
+
+	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
+		iotable_init(cns3xxx_pcie[i].cfg_bases,
+			     ARRAY_SIZE(cns3xxx_pcie[i].cfg_bases));
+		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
+		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
+		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
+		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
+		pci_common_init(&cns3xxx_pcie[i].hw_pci);
+	}
+
+	pci_assign_unassigned_resources();
+
+	return 0;
+}
+device_initcall(cns3xxx_pcie_init);
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 725e1a4fc231..38e44706feab 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -6,18 +6,25 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/io.h>
 #include <linux/delay.h>
 #include <mach/system.h>
 #include <mach/cns3xxx.h>
 
 void cns3xxx_pwr_clk_en(unsigned int block)
 {
-	PM_CLK_GATE_REG |= (block & PM_CLK_GATE_REG_MASK);
+	u32 reg = __raw_readl(PM_CLK_GATE_REG);
+
+	reg |= (block & PM_CLK_GATE_REG_MASK);
+	__raw_writel(reg, PM_CLK_GATE_REG);
 }
 
 void cns3xxx_pwr_power_up(unsigned int block)
 {
-	PM_PLL_HM_PD_CTRL_REG &= ~(block & CNS3XXX_PWR_PLL_ALL);
+	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
+
+	reg &= ~(block & CNS3XXX_PWR_PLL_ALL);
+	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
 
 	/* Wait for 300us for the PLL output clock locked. */
 	udelay(300);
@@ -25,22 +32,29 @@ void cns3xxx_pwr_power_up(unsigned int block)
 
 void cns3xxx_pwr_power_down(unsigned int block)
 {
+	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
+
 	/* write '1' to power down */
-	PM_PLL_HM_PD_CTRL_REG |= (block & CNS3XXX_PWR_PLL_ALL);
+	reg |= (block & CNS3XXX_PWR_PLL_ALL);
+	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
 };
 
 static void cns3xxx_pwr_soft_rst_force(unsigned int block)
 {
+	u32 reg = __raw_readl(PM_SOFT_RST_REG);
+
 	/*
 	 * bit 0, 28, 29 => program low to reset,
 	 * the other else program low and then high
 	 */
 	if (block & 0x30000001) {
-		PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
+		reg &= ~(block & PM_SOFT_RST_REG_MASK);
 	} else {
-		PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
-		PM_SOFT_RST_REG |= (block & PM_SOFT_RST_REG_MASK);
+		reg &= ~(block & PM_SOFT_RST_REG_MASK);
+		reg |= (block & PM_SOFT_RST_REG_MASK);
 	}
+
+	__raw_writel(reg, PM_SOFT_RST_REG);
 }
 
 void cns3xxx_pwr_soft_rst(unsigned int block)
@@ -73,12 +87,13 @@ void arch_reset(char mode, const char *cmd)
  */
 int cns3xxx_cpu_clock(void)
 {
+	u32 reg = __raw_readl(PM_CLK_CTRL_REG);
 	int cpu;
 	int cpu_sel;
 	int div_sel;
 
-	cpu_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
-	div_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
+	cpu_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
+	div_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
 
 	cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
 
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 0316e201ada0..b77b860b36d7 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -20,23 +20,23 @@ config ARCH_DAVINCI_DM644x
 	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM355
-        bool "DaVinci 355 based system"
+	bool "DaVinci 355 based system"
 	select AINTC
 	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM646x
-        bool "DaVinci 646x based system"
+	bool "DaVinci 646x based system"
 	select AINTC
 	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DA830
-        bool "DA830/OMAP-L137 based system"
+	bool "DA830/OMAP-L137/AM17x based system"
 	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
 	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
 
 config ARCH_DAVINCI_DA850
-	bool "DA850/OMAP-L138 based system"
+	bool "DA850/OMAP-L138/AM18x based system"
 	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
 	select ARCH_HAS_CPUFREQ
@@ -50,6 +50,11 @@ config ARCH_DAVINCI_DM365
 	select AINTC
 	select ARCH_DAVINCI_DMx
 
+config ARCH_DAVINCI_TNETV107X
+	select CPU_V6
+	select CP_INTC
+	bool "TNETV107X based system"
+
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
@@ -110,21 +115,21 @@ config MACH_DAVINCI_DM365_EVM
 	  for development is a DM365 EVM
 
 config MACH_DAVINCI_DA830_EVM
-	bool "TI DA830/OMAP-L137 Reference Platform"
+	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 	default ARCH_DAVINCI_DA830
 	depends on ARCH_DAVINCI_DA830
 	select GPIO_PCF857X
 	help
-	  Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
+	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 
 choice
-	prompt "Select DA830/OMAP-L137 UI board peripheral"
+	prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
 	depends on MACH_DAVINCI_DA830_EVM
 	help
-	  The presence of UI card on the DA830/OMAP-L137 EVM is detected
-	  automatically based on successful probe of the I2C based GPIO
-	  expander on that board. This option selected in this menu has
-	  an effect only in case of a successful UI card detection.
+	  The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
+	  detected automatically based on successful probe of the I2C
+	  based GPIO expander on that board. This option selected in this
+	  menu has an effect only in case of a successful UI card detection.
 
 config DA830_UI_LCD
 	bool "LCD"
@@ -135,23 +140,23 @@ config DA830_UI_LCD
 config DA830_UI_NAND
 	bool "NAND flash"
 	help
-	  Say Y here to use the NAND flash.  Do not forget to setup
+	  Say Y here to use the NAND flash. Do not forget to setup
 	  the switch correctly.
 endchoice
 
 config MACH_DAVINCI_DA850_EVM
-	bool "TI DA850/OMAP-L138 Reference Platform"
+	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
 	default ARCH_DAVINCI_DA850
 	depends on ARCH_DAVINCI_DA850
 	select GPIO_PCA953X
 	help
-	  Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
+	  Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
 
 choice
 	prompt "Select peripherals connected to expander on UI board"
 	depends on MACH_DAVINCI_DA850_EVM
 	help
-	  The presence of User Interface (UI) card on the DA850/OMAP-L138
+	  The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
 	  EVM is detected automatically based on successful probe of the I2C
 	  based GPIO expander on that card. This option selected in this
 	  menu has an effect only in case of a successful UI card detection.
@@ -160,19 +165,42 @@ config DA850_UI_NONE
 	bool "No peripheral is enabled"
 	help
 	  Say Y if you do not want to enable any of the peripherals connected
-	  to TCA6416 expander on DA850/OMAP-L138 EVM UI card
+	  to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
 
 config DA850_UI_RMII
 	bool "RMII Ethernet PHY"
 	help
-	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM.
-	  This PHY is found on the UI daughter card that is supplied with
+	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
+	  EVM. This PHY is found on the UI daughter card that is supplied with
 	  the EVM.
 	  NOTE: Please take care while choosing this option, MII PHY will
 	  not be functional if RMII mode is selected.
 
 endchoice
 
+config MACH_TNETV107X
+	bool "TI TNETV107X Reference Platform"
+	default ARCH_DAVINCI_TNETV107X
+	depends on ARCH_DAVINCI_TNETV107X
+	help
+	  Say Y here to select the TI TNETV107X Evaluation Module.
+
+config MACH_MITYOMAPL138
+	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
+	  System on Module.  Information on this SoM may be found at
+	  http://www.mitydsp.com
+
+config MACH_OMAPL138_HAWKBOARD
+	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
+	  Information of this board may be found at
+	  http://www.hawkboard.org/
+
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI
@@ -183,20 +211,20 @@ config DAVINCI_MUX
 	  say Y.
 
 config DAVINCI_MUX_DEBUG
-        bool "Multiplexing debug output"
-        depends on DAVINCI_MUX
-        help
-          Makes the multiplexing functions print out a lot of debug info.
-          This is useful if you want to find out the correct values of the
-          multiplexing registers.
+	bool "Multiplexing debug output"
+	depends on DAVINCI_MUX
+	help
+	  Makes the multiplexing functions print out a lot of debug info.
+	  This is useful if you want to find out the correct values of the
+	  multiplexing registers.
 
 config DAVINCI_MUX_WARNINGS
-        bool "Warn about pins the bootloader didn't set up"
-        depends on DAVINCI_MUX
-        help
-          Choose Y here to warn whenever driver initialization logic needs
-          to change the pin multiplexing setup.  When there are no warnings
-          printed, it's safe to deselect DAVINCI_MUX for your product.
+	bool "Warn about pins the bootloader didn't set up"
+	depends on DAVINCI_MUX
+	help
+	  Choose Y here to warn whenever driver initialization logic needs
+	  to change the pin multiplexing setup. When there are no warnings
+	  printed, it's safe to deselect DAVINCI_MUX for your product.
 
 config DAVINCI_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 6aac880eb794..0b87a1ca2bb3 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o io.o psc.o \
-			   gpio.o dma.o usb.o common.o sram.o
+			   gpio.o dma.o usb.o common.o sram.o aemif.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
@@ -16,6 +16,8 @@ obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += tnetv107x.o devices-tnetv107x.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += gpio-tnetv107x.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
@@ -30,6 +32,9 @@ obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o cdce949.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
+obj-$(CONFIG_MACH_TNETV107X)		+= board-tnetv107x-evm.o
+obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
+obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
 
 # Power Management
 obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
new file mode 100644
index 000000000000..9c3f500fc12f
--- /dev/null
+++ b/arch/arm/mach-davinci/aemif.c
@@ -0,0 +1,133 @@
+/*
+ * AEMIF support for DaVinci SoCs
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/time.h>
+
+#include <mach/aemif.h>
+
+/* Timing value configuration */
+
+#define TA(x)		((x) << 2)
+#define RHOLD(x)	((x) << 4)
+#define RSTROBE(x)	((x) << 7)
+#define RSETUP(x)	((x) << 13)
+#define WHOLD(x)	((x) << 17)
+#define WSTROBE(x)	((x) << 20)
+#define WSETUP(x)	((x) << 26)
+
+#define TA_MAX		0x3
+#define RHOLD_MAX	0x7
+#define RSTROBE_MAX	0x3f
+#define RSETUP_MAX	0xf
+#define WHOLD_MAX	0x7
+#define WSTROBE_MAX	0x3f
+#define WSETUP_MAX	0xf
+
+#define TIMING_MASK	(TA(TA_MAX) | \
+				RHOLD(RHOLD_MAX) | \
+				RSTROBE(RSTROBE_MAX) |	\
+				RSETUP(RSETUP_MAX) | \
+				WHOLD(WHOLD_MAX) | \
+				WSTROBE(WSTROBE_MAX) | \
+				WSETUP(WSETUP_MAX))
+
+/*
+ * aemif_calc_rate - calculate timing data.
+ * @wanted: The cycle time needed in nanoseconds.
+ * @clk: The input clock rate in kHz.
+ * @max: The maximum divider value that can be programmed.
+ *
+ * On success, returns the calculated timing value minus 1 for easy
+ * programming into AEMIF timing registers, else negative errno.
+ */
+static int aemif_calc_rate(int wanted, unsigned long clk, int max)
+{
+	int result;
+
+	result = DIV_ROUND_UP((wanted * clk), NSEC_PER_MSEC) - 1;
+
+	pr_debug("%s: result %d from %ld, %d\n", __func__, result, clk, wanted);
+
+	/* It is generally OK to have a more relaxed timing than requested... */
+	if (result < 0)
+		result = 0;
+
+	/* ... But configuring tighter timings is not an option. */
+	else if (result > max)
+		result = -EINVAL;
+
+	return result;
+}
+
+/**
+ * davinci_aemif_setup_timing - setup timing values for a given AEMIF interface
+ * @t: timing values to be progammed
+ * @base: The virtual base address of the AEMIF interface
+ * @cs: chip-select to program the timing values for
+ *
+ * This function programs the given timing values (in real clock) into the
+ * AEMIF registers taking the AEMIF clock into account.
+ *
+ * This function does not use any locking while programming the AEMIF
+ * because it is expected that there is only one user of a given
+ * chip-select.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
+					void __iomem *base, unsigned cs)
+{
+	unsigned set, val;
+	unsigned ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
+	unsigned offset = A1CR_OFFSET + cs * 4;
+	struct clk *aemif_clk;
+	unsigned long clkrate;
+
+	if (!t)
+		return 0;	/* Nothing to do */
+
+	aemif_clk = clk_get(NULL, "aemif");
+	if (IS_ERR(aemif_clk))
+		return PTR_ERR(aemif_clk);
+
+	clkrate = clk_get_rate(aemif_clk);
+
+	clkrate /= 1000;	/* turn clock into kHz for ease of use */
+
+	ta	= aemif_calc_rate(t->ta, clkrate, TA_MAX);
+	rhold	= aemif_calc_rate(t->rhold, clkrate, RHOLD_MAX);
+	rstrobe	= aemif_calc_rate(t->rstrobe, clkrate, RSTROBE_MAX);
+	rsetup	= aemif_calc_rate(t->rsetup, clkrate, RSETUP_MAX);
+	whold	= aemif_calc_rate(t->whold, clkrate, WHOLD_MAX);
+	wstrobe	= aemif_calc_rate(t->wstrobe, clkrate, WSTROBE_MAX);
+	wsetup	= aemif_calc_rate(t->wsetup, clkrate, WSETUP_MAX);
+
+	if (ta < 0 || rhold < 0 || rstrobe < 0 || rsetup < 0 ||
+			whold < 0 || wstrobe < 0 || wsetup < 0) {
+		pr_err("%s: cannot get suitable timings\n", __func__);
+		return -EINVAL;
+	}
+
+	set = TA(ta) | RHOLD(rhold) | RSTROBE(rstrobe) | RSETUP(rsetup) |
+		WHOLD(whold) | WSTROBE(wstrobe) | WSETUP(wsetup);
+
+	val = __raw_readl(base + offset);
+	val &= ~TIMING_MASK;
+	val |= set;
+	__raw_writel(val, base + offset);
+
+	return 0;
+}
+EXPORT_SYMBOL(davinci_aemif_setup_timing);
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 212d97084bd7..b52a3a1abd94 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -29,10 +29,9 @@
 #include <mach/nand.h>
 #include <mach/da8xx.h>
 #include <mach/usb.h>
+#include <mach/aemif.h>
 
-#define DA830_EVM_PHY_MASK		0x0
-#define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
-
+#define DA830_EVM_PHY_ID		""
 /*
  * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
  */
@@ -208,7 +207,7 @@ static struct snd_platform_data da830_evm_snd_data = {
 	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
 	.tdm_slots      = 2,
 	.serial_dir     = da830_iis_serializer_direction,
-	.eventq_no      = EVENTQ_0,
+	.asp_chan_q     = EVENTQ_0,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,
@@ -360,6 +359,16 @@ static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
 	.pattern	= da830_evm_nand_mirror_pattern
 };
 
+static struct davinci_aemif_timing da830_evm_nandflash_timing = {
+	.wsetup         = 24,
+	.wstrobe        = 21,
+	.whold          = 14,
+	.rsetup         = 19,
+	.rstrobe        = 50,
+	.rhold          = 0,
+	.ta             = 20,
+};
+
 static struct davinci_nand_pdata da830_evm_nand_pdata = {
 	.parts		= da830_evm_nand_partitions,
 	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
@@ -368,6 +377,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
 	.options	= NAND_USE_FLASH_BBT,
 	.bbt_td		= &da830_evm_nand_bbt_main_descr,
 	.bbt_md		= &da830_evm_nand_bbt_mirror_descr,
+	.timing         = &da830_evm_nandflash_timing,
 };
 
 static struct resource da830_evm_nand_resources[] = {
@@ -494,12 +504,42 @@ static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
 	.bus_delay	= 0,	/* usec */
 };
 
+/*
+ * The following EDMA channels/slots are not being used by drivers (for
+ * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence
+ * they are being reserved for codecs on the DSP side.
+ */
+static const s16 da830_dma_rsv_chans[][2] = {
+	/* (offset, number) */
+	{ 8,  2},
+	{12,  2},
+	{24,  4},
+	{30,  2},
+	{-1, -1}
+};
+
+static const s16 da830_dma_rsv_slots[][2] = {
+	/* (offset, number) */
+	{ 8,  2},
+	{12,  2},
+	{24,  4},
+	{30, 26},
+	{-1, -1}
+};
+
+static struct edma_rsv_info da830_edma_rsv[] = {
+	{
+		.rsv_chans	= da830_dma_rsv_chans,
+		.rsv_slots	= da830_dma_rsv_slots,
+	},
+};
+
 static __init void da830_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
-	ret = da8xx_register_edma();
+	ret = da830_register_edma(da830_edma_rsv);
 	if (ret)
 		pr_warning("da830_evm_init: edma registration failed: %d\n",
 				ret);
@@ -516,9 +556,8 @@ static __init void da830_evm_init(void)
 
 	da830_evm_usb_init();
 
-	soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
-	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
 	soc_info->emac_pdata->rmii_en = 1;
+	soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID;
 
 	ret = davinci_cfg_reg_list(da830_cpgmac_pins);
 	if (ret)
@@ -556,6 +595,9 @@ static __init void da830_evm_init(void)
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 static int __init da830_evm_console_init(void)
 {
+	if (!machine_is_davinci_da830_evm())
+		return 0;
+
 	return add_preferred_console("ttyS", 2, "115200");
 }
 console_initcall(da830_evm_console_init);
@@ -566,9 +608,7 @@ static void __init da830_evm_map_io(void)
 	da830_init();
 }
 
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM")
-	.phys_io	= IO_PHYS,
-	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
 	.map_io		= da830_evm_map_io,
 	.init_irq	= cp_intc_init,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index b280efb1fa12..c6e11c682e4c 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -26,7 +26,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/tps6507x.h>
-#include <linux/mfd/tps6507x.h>
 #include <linux/input/tps6507x-ts.h>
 
 #include <asm/mach-types.h>
@@ -36,10 +35,9 @@
 #include <mach/da8xx.h>
 #include <mach/nand.h>
 #include <mach/mux.h>
+#include <mach/aemif.h>
 
-#define DA850_EVM_PHY_MASK		0x1
-#define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
-
+#define DA850_EVM_PHY_ID		"0:00"
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
 #define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
 
@@ -110,7 +108,7 @@ static struct platform_device da850_pm_device = {
  * to boot, using TI's tools to install the secondary boot loader
  * (UBL) and U-Boot.
  */
-struct mtd_partition da850_evm_nandflash_partition[] = {
+static struct mtd_partition da850_evm_nandflash_partition[] = {
 	{
 		.name		= "u-boot env",
 		.offset		= 0,
@@ -143,12 +141,23 @@ struct mtd_partition da850_evm_nandflash_partition[] = {
 	},
 };
 
+static struct davinci_aemif_timing da850_evm_nandflash_timing = {
+	.wsetup		= 24,
+	.wstrobe	= 21,
+	.whold		= 14,
+	.rsetup		= 19,
+	.rstrobe	= 50,
+	.rhold		= 0,
+	.ta		= 20,
+};
+
 static struct davinci_nand_pdata da850_evm_nandflash_data = {
 	.parts		= da850_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
 	.ecc_bits	= 4,
 	.options	= NAND_USE_FLASH_BBT,
+	.timing		= &da850_evm_nandflash_timing,
 };
 
 static struct resource da850_evm_nandflash_resource[] = {
@@ -196,6 +205,30 @@ static void __init da850_evm_init_nor(void)
 	iounmap(aemif_addr);
 }
 
+static const short da850_evm_nand_pins[] = {
+	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
+	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
+	DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
+	DA850_NEMA_WE, DA850_NEMA_OE,
+	-1
+};
+
+static const short da850_evm_nor_pins[] = {
+	DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
+	DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
+	DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
+	DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
+	DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
+	DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
+	DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
+	DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
+	DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
+	DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
+	DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
+	DA850_EMA_A_22, DA850_EMA_A_23,
+	-1
+};
+
 static u32 ui_card_detected;
 
 #if defined(CONFIG_MMC_DAVINCI) || \
@@ -205,17 +238,17 @@ static u32 ui_card_detected;
 #define HAS_MMC 0
 #endif
 
-static __init void da850_evm_setup_nor_nand(void)
+static inline void da850_evm_setup_nor_nand(void)
 {
 	int ret = 0;
 
 	if (ui_card_detected & !HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_nand_pins);
+		ret = davinci_cfg_reg_list(da850_evm_nand_pins);
 		if (ret)
 			pr_warning("da850_evm_init: nand mux setup failed: "
 					"%d\n", ret);
 
-		ret = davinci_cfg_reg_list(da850_nor_pins);
+		ret = davinci_cfg_reg_list(da850_evm_nor_pins);
 		if (ret)
 			pr_warning("da850_evm_init: nor mux setup failed: %d\n",
 				ret);
@@ -343,7 +376,7 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
 	.tdm_slots	= 2,
 	.serial_dir	= da850_iis_serializer_direction,
-	.eventq_no	= EVENTQ_1,
+	.asp_chan_q	= EVENTQ_1,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,
@@ -406,7 +439,7 @@ static int da850_lcd_hw_init(void)
 /* TPS65070 voltage regulator support */
 
 /* 3.3V */
-struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
+static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
 	{
 		.supply = "usb0_vdda33",
 	},
@@ -416,7 +449,7 @@ struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
 };
 
 /* 3.3V or 1.8V */
-struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
+static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
 	{
 		.supply = "dvdd3318_a",
 	},
@@ -429,14 +462,14 @@ struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
 };
 
 /* 1.2V */
-struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
+static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
 	{
 		.supply = "cvdd",
 	},
 };
 
 /* 1.8V LDO */
-struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
+static struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
 	{
 		.supply = "sata_vddr",
 	},
@@ -452,7 +485,7 @@ struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
 };
 
 /* 1.2V LDO */
-struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
+static struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
 	{
 		.supply = "sata_vdd",
 	},
@@ -475,7 +508,7 @@ static struct tps6507x_reg_platform_data tps6507x_platform_data = {
 	.defdcdc_default = true,
 };
 
-struct regulator_init_data tps65070_regulator_data[] = {
+static struct regulator_init_data tps65070_regulator_data[] = {
 	/* dcdc1 */
 	{
 		.constraints = {
@@ -576,6 +609,23 @@ static const short da850_evm_lcdc_pins[] = {
 	-1
 };
 
+static const short da850_evm_mii_pins[] = {
+	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
+	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
+	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
+	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	-1
+};
+
+static const short da850_evm_rmii_pins[] = {
+	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
+	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
+	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	-1
+};
+
 static int __init da850_evm_config_emac(void)
 {
 	void __iomem *cfg_chip3_base;
@@ -593,12 +643,12 @@ static int __init da850_evm_config_emac(void)
 
 	if (rmii_en) {
 		val |= BIT(8);
-		ret = davinci_cfg_reg_list(da850_rmii_pins);
+		ret = davinci_cfg_reg_list(da850_evm_rmii_pins);
 		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
 							" functional\n");
 	} else {
 		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(da850_cpgmac_pins);
+		ret = davinci_cfg_reg_list(da850_evm_mii_pins);
 		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
 							" functional\n");
 	}
@@ -625,8 +675,7 @@ static int __init da850_evm_config_emac(void)
 	/* Enable/Disable MII MDIO clock */
 	gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
 
-	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
-	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
 
 	ret = da8xx_register_emac();
 	if (ret)
@@ -637,6 +686,56 @@ static int __init da850_evm_config_emac(void)
 }
 device_initcall(da850_evm_config_emac);
 
+/*
+ * The following EDMA channels/slots are not being used by drivers (for
+ * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence
+ * they are being reserved for codecs on the DSP side.
+ */
+static const s16 da850_dma0_rsv_chans[][2] = {
+	/* (offset, number) */
+	{ 8,  6},
+	{24,  4},
+	{30,  2},
+	{-1, -1}
+};
+
+static const s16 da850_dma0_rsv_slots[][2] = {
+	/* (offset, number) */
+	{ 8,  6},
+	{24,  4},
+	{30, 50},
+	{-1, -1}
+};
+
+static const s16 da850_dma1_rsv_chans[][2] = {
+	/* (offset, number) */
+	{ 0, 28},
+	{30,  2},
+	{-1, -1}
+};
+
+static const s16 da850_dma1_rsv_slots[][2] = {
+	/* (offset, number) */
+	{ 0, 28},
+	{30, 90},
+	{-1, -1}
+};
+
+static struct edma_rsv_info da850_edma_cc0_rsv = {
+	.rsv_chans	= da850_dma0_rsv_chans,
+	.rsv_slots	= da850_dma0_rsv_slots,
+};
+
+static struct edma_rsv_info da850_edma_cc1_rsv = {
+	.rsv_chans	= da850_dma1_rsv_chans,
+	.rsv_slots	= da850_dma1_rsv_slots,
+};
+
+static struct edma_rsv_info *da850_edma_rsv[2] = {
+	&da850_edma_cc0_rsv,
+	&da850_edma_cc1_rsv,
+};
+
 static __init void da850_evm_init(void)
 {
 	int ret;
@@ -646,7 +745,7 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
 				ret);
 
-	ret = da8xx_register_edma();
+	ret = da850_register_edma(da850_edma_rsv);
 	if (ret)
 		pr_warning("da850_evm_init: edma registration failed: %d\n",
 				ret);
@@ -737,7 +836,7 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
 
-	ret = da850_register_cpufreq();
+	ret = da850_register_cpufreq("pll0_sysclk3");
 	if (ret)
 		pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
 				ret);
@@ -756,6 +855,9 @@ static __init void da850_evm_init(void)
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 static int __init da850_evm_console_init(void)
 {
+	if (!machine_is_davinci_da850_evm())
+		return 0;
+
 	return add_preferred_console("ttyS", 2, "115200");
 }
 console_initcall(da850_evm_console_init);
@@ -766,9 +868,7 @@ static void __init da850_evm_map_io(void)
 	da850_init();
 }
 
-MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
-	.phys_io	= IO_PHYS,
-	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
 	.map_io		= da850_evm_map_io,
 	.init_irq	= cp_intc_init,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index a3191015efee..6e7cad13352c 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -351,8 +351,6 @@ static __init void dm355_evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io	      = dm355_evm_map_io,
 	.init_irq     = davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index f1d8132cf0c3..543f9911b281 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -270,8 +270,6 @@ static __init void dm355_leopard_init(void)
 }
 
 MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io	      = dm355_leopard_map_io,
 	.init_irq     = davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 84acef1d0b3d..c67f684ee3e5 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -54,9 +54,7 @@ static inline int have_tvp7002(void)
 	return 0;
 }
 
-#define DM365_EVM_PHY_MASK		(0x2)
-#define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
-
+#define DM365_EVM_PHY_ID		"0:01"
 /*
  * A MAX-II CPLD is used for various board control functions.
  */
@@ -175,7 +173,9 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
-static struct snd_platform_data dm365_evm_snd_data;
+static struct snd_platform_data dm365_evm_snd_data = {
+	.asp_chan_q = EVENTQ_3,
+};
 
 static struct i2c_board_info i2c_info[] = {
 	{
@@ -533,8 +533,7 @@ fail:
 
 		/* ... and ENET ... */
 		dm365evm_emac_configure();
-		soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
-		soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
+		soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID;
 		resets &= ~BIT(3);
 
 		/* ... and AIC33 */
@@ -613,8 +612,6 @@ static __init void dm365_evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-	.phys_io	= IO_PHYS,
-	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (0x80000100),
 	.map_io		= dm365_evm_map_io,
 	.init_irq	= davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 34c8b418cd72..0ca90b834586 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -37,10 +37,9 @@
 #include <mach/nand.h>
 #include <mach/mmc.h>
 #include <mach/usb.h>
+#include <mach/aemif.h>
 
-#define DM644X_EVM_PHY_MASK		(0x2)
-#define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
-
+#define DM644X_EVM_PHY_ID		"0:01"
 #define LXT971_PHY_ID	(0x001378e2)
 #define LXT971_PHY_MASK	(0xfffffff0)
 
@@ -137,11 +136,22 @@ static struct mtd_partition davinci_evm_nandflash_partition[] = {
 	 */
 };
 
+static struct davinci_aemif_timing davinci_evm_nandflash_timing = {
+	.wsetup		= 20,
+	.wstrobe	= 40,
+	.whold		= 20,
+	.rsetup		= 10,
+	.rstrobe	= 40,
+	.rhold		= 10,
+	.ta		= 40,
+};
+
 static struct davinci_nand_pdata davinci_evm_nandflash_data = {
 	.parts		= davinci_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
 	.ecc_mode	= NAND_ECC_HW,
 	.options	= NAND_USE_FLASH_BBT,
+	.timing		= &davinci_evm_nandflash_timing,
 };
 
 static struct resource davinci_evm_nandflash_resource[] = {
@@ -695,9 +705,7 @@ static __init void davinci_evm_init(void)
 	davinci_serial_init(&uart_config);
 	dm644x_init_asp(&dm644x_evm_snd_data);
 
-	soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
-	soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
-
+	soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
 	/* Register the fixup for PHY on DaVinci */
 	phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
 					davinci_phy_fixup);
@@ -706,8 +714,6 @@ static __init void davinci_evm_init(void)
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
 	.map_io	      = davinci_evm_map_io,
 	.init_irq     = davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 6d8889342c9f..f6ac9ba74878 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -42,6 +42,7 @@
 #include <mach/nand.h>
 #include <mach/clock.h>
 #include <mach/cdce949.h>
+#include <mach/aemif.h>
 
 #include "clock.h"
 
@@ -71,6 +72,16 @@ static struct mtd_partition davinci_nand_partitions[] = {
 	}
 };
 
+static struct davinci_aemif_timing dm6467tevm_nandflash_timing = {
+	.wsetup		= 29,
+	.wstrobe	= 24,
+	.whold		= 14,
+	.rsetup		= 19,
+	.rstrobe	= 33,
+	.rhold		= 0,
+	.ta		= 29,
+};
+
 static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_cle 		= 0x80000,
 	.mask_ale 		= 0x40000,
@@ -323,7 +334,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 		.num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
 		.tdm_slots      = 2,
 		.serial_dir     = dm646x_iis_serializer_direction,
-		.eventq_no      = EVENTQ_0,
+		.asp_chan_q     = EVENTQ_0,
 	},
 	{
 		.tx_dma_offset  = 0x400,
@@ -332,7 +343,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 		.num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
 		.tdm_slots      = 32,
 		.serial_dir     = dm646x_dit_serializer_direction,
-		.eventq_no      = EVENTQ_0,
+		.asp_chan_q     = EVENTQ_0,
 	},
 };
 
@@ -718,8 +729,39 @@ static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
 
-#define DM646X_EVM_PHY_MASK		(0x2)
-#define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
+#define DM646X_EVM_PHY_ID		"0:01"
+/*
+ * The following EDMA channels/slots are not being used by drivers (for
+ * example: Timer, GPIO, UART events etc) on dm646x, hence they are being
+ * reserved for codecs on the DSP side.
+ */
+static const s16 dm646x_dma_rsv_chans[][2] = {
+	/* (offset, number) */
+	{ 0,  4},
+	{13,  3},
+	{24,  4},
+	{30,  2},
+	{54,  3},
+	{-1, -1}
+};
+
+static const s16 dm646x_dma_rsv_slots[][2] = {
+	/* (offset, number) */
+	{ 0,  4},
+	{13,  3},
+	{24,  4},
+	{30,  2},
+	{54,  3},
+	{128, 384},
+	{-1, -1}
+};
+
+static struct edma_rsv_info dm646x_edma_rsv[] = {
+	{
+		.rsv_chans	= dm646x_dma_rsv_chans,
+		.rsv_slots	= dm646x_dma_rsv_slots,
+	},
+};
 
 static __init void evm_init(void)
 {
@@ -730,13 +772,17 @@ static __init void evm_init(void)
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
+	if (machine_is_davinci_dm6467tevm())
+		davinci_nand_data.timing = &dm6467tevm_nandflash_timing;
+
 	platform_device_register(&davinci_nand_device);
 
+	dm646x_init_edma(dm646x_edma_rsv);
+
 	if (HAS_ATA)
 		davinci_init_ide();
 
-	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
-	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
 }
 
 #define DM646X_EVM_REF_FREQ		27000000
@@ -751,8 +797,6 @@ void __init dm646x_board_setup_refclk(struct clk *clk)
 }
 
 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
@@ -761,8 +805,6 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 MACHINE_END
 
 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
new file mode 100644
index 000000000000..0bb5f0ce4fdc
--- /dev/null
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -0,0 +1,422 @@
+/*
+ * Critical Link MityOMAP-L138 SoM
+ *
+ * Copyright (C) 2010 Critical Link LLC - http://www.criticallink.com
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of
+ * any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/regulator/machine.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/common.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+#include <mach/nand.h>
+#include <mach/mux.h>
+
+#define MITYOMAPL138_PHY_ID		"0:03"
+
+#define FACTORY_CONFIG_MAGIC	0x012C0138
+#define FACTORY_CONFIG_VERSION	0x00010001
+
+/* Data Held in On-Board I2C device */
+struct factory_config {
+	u32	magic;
+	u32	version;
+	u8	mac[6];
+	u32	fpga_type;
+	u32	spare;
+	u32	serialnumber;
+	char	partnum[32];
+};
+
+static struct factory_config factory_config;
+
+static void read_factory_config(struct memory_accessor *a, void *context)
+{
+	int ret;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
+	if (ret != sizeof(struct factory_config)) {
+		pr_warning("MityOMAPL138: Read Factory Config Failed: %d\n",
+				ret);
+		return;
+	}
+
+	if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
+		pr_warning("MityOMAPL138: Factory Config Magic Wrong (%X)\n",
+				factory_config.magic);
+		return;
+	}
+
+	if (factory_config.version != FACTORY_CONFIG_VERSION) {
+		pr_warning("MityOMAPL138: Factory Config Version Wrong (%X)\n",
+				factory_config.version);
+		return;
+	}
+
+	pr_info("MityOMAPL138: Found MAC = %pM\n", factory_config.mac);
+	pr_info("MityOMAPL138: Part Number = %s\n", factory_config.partnum);
+	if (is_valid_ether_addr(factory_config.mac))
+		memcpy(soc_info->emac_pdata->mac_addr,
+			factory_config.mac, ETH_ALEN);
+	else
+		pr_warning("MityOMAPL138: Invalid MAC found "
+				"in factory config block\n");
+}
+
+static struct at24_platform_data mityomapl138_fd_chip = {
+	.byte_len	= 256,
+	.page_size	= 8,
+	.flags		= AT24_FLAG_READONLY | AT24_FLAG_IRUGO,
+	.setup		= read_factory_config,
+	.context	= NULL,
+};
+
+static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
+/* TPS65023 voltage regulator support */
+/* 1.2V Core */
+static struct regulator_consumer_supply tps65023_dcdc1_consumers[] = {
+	{
+		.supply = "cvdd",
+	},
+};
+
+/* 1.8V */
+static struct regulator_consumer_supply tps65023_dcdc2_consumers[] = {
+	{
+		.supply = "usb0_vdda18",
+	},
+	{
+		.supply = "usb1_vdda18",
+	},
+	{
+		.supply = "ddr_dvdd18",
+	},
+	{
+		.supply = "sata_vddr",
+	},
+};
+
+/* 1.2V */
+static struct regulator_consumer_supply tps65023_dcdc3_consumers[] = {
+	{
+		.supply = "sata_vdd",
+	},
+	{
+		.supply = "usb_cvdd",
+	},
+	{
+		.supply = "pll0_vdda",
+	},
+	{
+		.supply = "pll1_vdda",
+	},
+};
+
+/* 1.8V Aux LDO, not used */
+static struct regulator_consumer_supply tps65023_ldo1_consumers[] = {
+	{
+		.supply = "1.8v_aux",
+	},
+};
+
+/* FPGA VCC Aux (2.5 or 3.3) LDO */
+static struct regulator_consumer_supply tps65023_ldo2_consumers[] = {
+	{
+		.supply = "vccaux",
+	},
+};
+
+static struct regulator_init_data tps65023_regulator_data[] = {
+	/* dcdc1 */
+	{
+		.constraints = {
+			.min_uV = 1150000,
+			.max_uV = 1350000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS,
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers),
+		.consumer_supplies = tps65023_dcdc1_consumers,
+	},
+	/* dcdc2 */
+	{
+		.constraints = {
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers),
+		.consumer_supplies = tps65023_dcdc2_consumers,
+	},
+	/* dcdc3 */
+	{
+		.constraints = {
+			.min_uV = 1200000,
+			.max_uV = 1200000,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers),
+		.consumer_supplies = tps65023_dcdc3_consumers,
+	},
+	/* ldo1 */
+	{
+		.constraints = {
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers),
+		.consumer_supplies = tps65023_ldo1_consumers,
+	},
+	/* ldo2 */
+	{
+		.constraints = {
+			.min_uV = 2500000,
+			.max_uV = 3300000,
+			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+					  REGULATOR_CHANGE_STATUS,
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers),
+		.consumer_supplies = tps65023_ldo2_consumers,
+	},
+};
+
+static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
+	{
+		I2C_BOARD_INFO("tps65023", 0x48),
+		.platform_data = &tps65023_regulator_data[0],
+	},
+	{
+		I2C_BOARD_INFO("24c02", 0x50),
+		.platform_data = &mityomapl138_fd_chip,
+	},
+};
+
+static int __init pmic_tps65023_init(void)
+{
+	return i2c_register_board_info(1, mityomap_tps65023_info,
+					ARRAY_SIZE(mityomap_tps65023_info));
+}
+
+/*
+ * MityDSP-L138 includes a 256 MByte large-page NAND flash
+ * (128K blocks).
+ */
+static struct mtd_partition mityomapl138_nandflash_partition[] = {
+	{
+		.name		= "rootfs",
+		.offset		= 0,
+		.size		= SZ_128M,
+		.mask_flags	= 0, /* MTD_WRITEABLE, */
+	},
+	{
+		.name		= "homefs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	},
+};
+
+static struct davinci_nand_pdata mityomapl138_nandflash_data = {
+	.parts		= mityomapl138_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(mityomapl138_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT | NAND_BUSWIDTH_16,
+	.ecc_bits	= 1, /* 4 bit mode is not supported with 16 bit NAND */
+};
+
+static struct resource mityomapl138_nandflash_resource[] = {
+	{
+		.start	= DA8XX_AEMIF_CS3_BASE,
+		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device mityomapl138_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &mityomapl138_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
+	.resource	= mityomapl138_nandflash_resource,
+};
+
+static struct platform_device *mityomapl138_devices[] __initdata = {
+	&mityomapl138_nandflash_device,
+};
+
+static void __init mityomapl138_setup_nand(void)
+{
+	platform_add_devices(mityomapl138_devices,
+				 ARRAY_SIZE(mityomapl138_devices));
+}
+
+static struct davinci_uart_config mityomapl138_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static const short mityomap_mii_pins[] = {
+	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
+	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
+	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
+	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	-1
+};
+
+static const short mityomap_rmii_pins[] = {
+	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
+	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
+	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	-1
+};
+
+static void __init mityomapl138_config_emac(void)
+{
+	void __iomem *cfg_chip3_base;
+	int ret;
+	u32 val;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	soc_info->emac_pdata->rmii_en = 0; /* hardcoded for now */
+
+	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
+	val = __raw_readl(cfg_chip3_base);
+
+	if (soc_info->emac_pdata->rmii_en) {
+		val |= BIT(8);
+		ret = davinci_cfg_reg_list(mityomap_rmii_pins);
+		pr_info("RMII PHY configured\n");
+	} else {
+		val &= ~BIT(8);
+		ret = davinci_cfg_reg_list(mityomap_mii_pins);
+		pr_info("MII PHY configured\n");
+	}
+
+	if (ret) {
+		pr_warning("mii/rmii mux setup failed: %d\n", ret);
+		return;
+	}
+
+	/* configure the CFGCHIP3 register for RMII or MII */
+	__raw_writel(val, cfg_chip3_base);
+
+	soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID;
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("emac registration failed: %d\n", ret);
+}
+
+static struct davinci_pm_config da850_pm_pdata = {
+	.sleepcount = 128,
+};
+
+static struct platform_device da850_pm_device = {
+	.name	= "pm-davinci",
+	.dev = {
+		.platform_data  = &da850_pm_pdata,
+	},
+	.id	= -1,
+};
+
+static void __init mityomapl138_init(void)
+{
+	int ret;
+
+	/* for now, no special EDMA channels are reserved */
+	ret = da850_register_edma(NULL);
+	if (ret)
+		pr_warning("edma registration failed: %d\n", ret);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("watchdog registration failed: %d\n", ret);
+
+	davinci_serial_init(&mityomapl138_uart_config);
+
+	ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
+	if (ret)
+		pr_warning("i2c0 registration failed: %d\n", ret);
+
+	ret = pmic_tps65023_init();
+	if (ret)
+		pr_warning("TPS65023 PMIC init failed: %d\n", ret);
+
+	mityomapl138_setup_nand();
+
+	mityomapl138_config_emac();
+
+	ret = da8xx_register_rtc();
+	if (ret)
+		pr_warning("rtc setup failed: %d\n", ret);
+
+	ret = da850_register_cpufreq("pll0_sysclk3");
+	if (ret)
+		pr_warning("cpufreq registration failed: %d\n", ret);
+
+	ret = da8xx_register_cpuidle();
+	if (ret)
+		pr_warning("cpuidle registration failed: %d\n", ret);
+
+	ret = da850_register_pm(&da850_pm_device);
+	if (ret)
+		pr_warning("da850_evm_init: suspend registration failed: %d\n",
+				ret);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init mityomapl138_console_init(void)
+{
+	if (!machine_is_mityomapl138())
+		return 0;
+
+	return add_preferred_console("ttyS", 1, "115200");
+}
+console_initcall(mityomapl138_console_init);
+#endif
+
+static void __init mityomapl138_map_io(void)
+{
+	da850_init();
+}
+
+MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= mityomapl138_map_io,
+	.init_irq	= cp_intc_init,
+	.timer		= &davinci_timer,
+	.init_machine	= mityomapl138_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 4c30e929bbf9..6c389ff1020e 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -39,9 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/usb.h>
 
-#define NEUROS_OSD2_PHY_MASK		0x2
-#define NEUROS_OSD2_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
-
+#define NEUROS_OSD2_PHY_ID		"0:01"
 #define LXT971_PHY_ID			0x001378e2
 #define LXT971_PHY_MASK			0xfffffff0
 
@@ -252,8 +250,7 @@ static __init void davinci_ntosd2_init(void)
 	davinci_serial_init(&uart_config);
 	dm644x_init_asp(&dm644x_ntosd2_snd_data);
 
-	soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK;
-	soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY;
+	soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
 
 	davinci_setup_usb(1000, 8);
 	/*
@@ -275,8 +272,6 @@ static __init void davinci_ntosd2_init(void)
 
 MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
-	.phys_io	= IO_PHYS,
-	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DAVINCI_DDR_BASE + 0x100),
 	.map_io		 = davinci_ntosd2_map_io,
 	.init_irq	= davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
new file mode 100644
index 000000000000..0b8dbdb79fe0
--- /dev/null
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -0,0 +1,62 @@
+/*
+ * Hawkboard.org based on TI's OMAP-L138 Platform
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of
+ * any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+
+static struct davinci_uart_config omapl138_hawk_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static __init void omapl138_hawk_init(void)
+{
+	int ret;
+
+	davinci_serial_init(&omapl138_hawk_uart_config);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("omapl138_hawk_init: "
+			"watchdog registration failed: %d\n",
+			ret);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init omapl138_hawk_console_init(void)
+{
+	if (!machine_is_omapl138_hawkboard())
+		return 0;
+
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(omapl138_hawk_console_init);
+#endif
+
+static void __init omapl138_hawk_map_io(void)
+{
+	da850_init();
+}
+
+MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= omapl138_hawk_map_io,
+	.init_irq	= cp_intc_init,
+	.timer		= &davinci_timer,
+	.init_machine	= omapl138_hawk_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 23e664a1a802..61ac96d8f00d 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -42,9 +42,7 @@
 #include <mach/mux.h>
 #include <mach/usb.h>
 
-#define SFFSDR_PHY_MASK		(0x2)
-#define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
-
+#define SFFSDR_PHY_ID		"0:01"
 static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
 	/* U-Boot Environment: Block 0
 	 * UBL:                Block 1
@@ -143,8 +141,7 @@ static __init void davinci_sffsdr_init(void)
 			     ARRAY_SIZE(davinci_sffsdr_devices));
 	sffsdr_init_i2c();
 	davinci_serial_init(&uart_config);
-	soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
-	soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
+	soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
 	davinci_setup_usb(0, 0); /* We support only peripheral mode. */
 
 	/* mux VLYNQ pins */
@@ -154,8 +151,6 @@ static __init void davinci_sffsdr_init(void)
 
 MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
-	.phys_io      = IO_PHYS,
-	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
 	.map_io	      = davinci_sffsdr_map_io,
 	.init_irq     = davinci_irq_init,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
new file mode 100644
index 000000000000..a6db85460227
--- /dev/null
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -0,0 +1,228 @@
+/*
+ * Texas Instruments TNETV107X EVM Board Support
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/ratelimit.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
+#include <mach/cp_intc.h>
+#include <mach/tnetv107x.h>
+
+#define EVM_MMC_WP_GPIO		21
+#define EVM_MMC_CD_GPIO		24
+
+static int initialize_gpio(int gpio, char *desc)
+{
+	int ret;
+
+	ret = gpio_request(gpio, desc);
+	if (ret < 0) {
+		pr_err_ratelimited("cannot open %s gpio\n", desc);
+		return -ENOSYS;
+	}
+	gpio_direction_input(gpio);
+	return gpio;
+}
+
+static int mmc_get_cd(int index)
+{
+	static int gpio;
+
+	if (!gpio)
+		gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect");
+
+	if (gpio < 0)
+		return gpio;
+
+	return gpio_get_value(gpio) ? 0 : 1;
+}
+
+static int mmc_get_ro(int index)
+{
+	static int gpio;
+
+	if (!gpio)
+		gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect");
+
+	if (gpio < 0)
+		return gpio;
+
+	return gpio_get_value(gpio) ? 1 : 0;
+}
+
+static struct davinci_mmc_config mmc_config = {
+	.get_cd		= mmc_get_cd,
+	.get_ro		= mmc_get_ro,
+	.wires		= 4,
+	.max_freq	= 50000000,
+	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version	= MMC_CTLR_VERSION_1,
+};
+
+static const short sdio1_pins[] __initdata = {
+	TNETV107X_SDIO1_CLK_1,		TNETV107X_SDIO1_CMD_1,
+	TNETV107X_SDIO1_DATA0_1,	TNETV107X_SDIO1_DATA1_1,
+	TNETV107X_SDIO1_DATA2_1,	TNETV107X_SDIO1_DATA3_1,
+	TNETV107X_GPIO21,		TNETV107X_GPIO24,
+	-1
+};
+
+static const short uart1_pins[] __initdata = {
+	TNETV107X_UART1_RD,		TNETV107X_UART1_TD,
+	-1
+};
+
+static struct mtd_partition nand_partitions[] = {
+	/* bootloader (U-Boot, etc) in first 12 sectors */
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= (12*SZ_128K),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+		.name		= "params",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* kernel */
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	},
+	/* file system */
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+};
+
+static struct davinci_nand_pdata nand_config = {
+	.mask_cle	= 0x4000,
+	.mask_ale	= 0x2000,
+	.parts		= nand_partitions,
+	.nr_parts	= ARRAY_SIZE(nand_partitions),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
+	.ecc_bits	= 1,
+};
+
+static struct davinci_uart_config serial_config __initconst = {
+	.enabled_uarts	= BIT(1),
+};
+
+static const uint32_t keymap[] = {
+	KEY(0, 0, KEY_NUMERIC_1),
+	KEY(0, 1, KEY_NUMERIC_2),
+	KEY(0, 2, KEY_NUMERIC_3),
+	KEY(0, 3, KEY_FN_F1),
+	KEY(0, 4, KEY_MENU),
+
+	KEY(1, 0, KEY_NUMERIC_4),
+	KEY(1, 1, KEY_NUMERIC_5),
+	KEY(1, 2, KEY_NUMERIC_6),
+	KEY(1, 3, KEY_UP),
+	KEY(1, 4, KEY_FN_F2),
+
+	KEY(2, 0, KEY_NUMERIC_7),
+	KEY(2, 1, KEY_NUMERIC_8),
+	KEY(2, 2, KEY_NUMERIC_9),
+	KEY(2, 3, KEY_LEFT),
+	KEY(2, 4, KEY_ENTER),
+
+	KEY(3, 0, KEY_NUMERIC_STAR),
+	KEY(3, 1, KEY_NUMERIC_0),
+	KEY(3, 2, KEY_NUMERIC_POUND),
+	KEY(3, 3, KEY_DOWN),
+	KEY(3, 4, KEY_RIGHT),
+
+	KEY(4, 0, KEY_FN_F3),
+	KEY(4, 1, KEY_FN_F4),
+	KEY(4, 2, KEY_MUTE),
+	KEY(4, 3, KEY_HOME),
+	KEY(4, 4, KEY_BACK),
+
+	KEY(5, 0, KEY_VOLUMEDOWN),
+	KEY(5, 1, KEY_VOLUMEUP),
+	KEY(5, 2, KEY_F1),
+	KEY(5, 3, KEY_F2),
+	KEY(5, 4, KEY_F3),
+};
+
+static const struct matrix_keymap_data keymap_data = {
+	.keymap		= keymap,
+	.keymap_size	= ARRAY_SIZE(keymap),
+};
+
+static struct matrix_keypad_platform_data keypad_config = {
+	.keymap_data	= &keymap_data,
+	.num_row_gpios	= 6,
+	.num_col_gpios	= 5,
+	.debounce_ms	= 0, /* minimum */
+	.active_low	= 0, /* pull up realization */
+	.no_autorepeat	= 0,
+};
+
+static struct tnetv107x_device_info evm_device_info __initconst = {
+	.serial_config		= &serial_config,
+	.mmc_config[1]		= &mmc_config,	/* controller 1 */
+	.nand_config[0]		= &nand_config,	/* chip select 0 */
+	.keypad_config		= &keypad_config,
+};
+
+static __init void tnetv107x_evm_board_init(void)
+{
+	davinci_cfg_reg_list(sdio1_pins);
+	davinci_cfg_reg_list(uart1_pins);
+
+	tnetv107x_devices_init(&evm_device_info);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init tnetv107x_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 0, "115200");
+}
+console_initcall(tnetv107x_evm_console_init);
+#endif
+
+MACHINE_START(TNETV107X, "TNETV107X EVM")
+	.boot_params	= (TNETV107X_DDR_BASE + 0x100),
+	.map_io		= tnetv107x_init,
+	.init_irq	= cp_intc_init,
+	.timer		= &davinci_timer,
+	.init_machine	= tnetv107x_evm_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 054c303caead..01ba080433db 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -236,7 +236,7 @@ static int __init clk_disable_unused(void)
 		if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc))
 			continue;
 
-		pr_info("Clocks: disable unused %s\n", ck->name);
+		pr_debug("Clocks: disable unused %s\n", ck->name);
 
 		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc,
 				(ck->flags & PSC_SWRSTDISABLE) ?
@@ -287,6 +287,79 @@ static unsigned long clk_sysclk_recalc(struct clk *clk)
 	return rate;
 }
 
+int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned v;
+	struct pll_data *pll;
+	unsigned long input;
+	unsigned ratio = 0;
+
+	/* If this is the PLL base clock, wrong function to call */
+	if (clk->pll_data)
+		return -EINVAL;
+
+	/* There must be a parent... */
+	if (WARN_ON(!clk->parent))
+		return -EINVAL;
+
+	/* ... the parent must be a PLL... */
+	if (WARN_ON(!clk->parent->pll_data))
+		return -EINVAL;
+
+	/* ... and this clock must have a divider. */
+	if (WARN_ON(!clk->div_reg))
+		return -EINVAL;
+
+	pll = clk->parent->pll_data;
+
+	input = clk->parent->rate;
+
+	/* If pre-PLL, source clock is before the multiplier and divider(s) */
+	if (clk->flags & PRE_PLL)
+		input = pll->input_rate;
+
+	if (input > rate) {
+		/*
+		 * Can afford to provide an output little higher than requested
+		 * only if maximum rate supported by hardware on this sysclk
+		 * is known.
+		 */
+		if (clk->maxrate) {
+			ratio = DIV_ROUND_CLOSEST(input, rate);
+			if (input / ratio > clk->maxrate)
+				ratio = 0;
+		}
+
+		if (ratio == 0)
+			ratio = DIV_ROUND_UP(input, rate);
+
+		ratio--;
+	}
+
+	if (ratio > PLLDIV_RATIO_MASK)
+		return -EINVAL;
+
+	do {
+		v = __raw_readl(pll->base + PLLSTAT);
+	} while (v & PLLSTAT_GOSTAT);
+
+	v = __raw_readl(pll->base + clk->div_reg);
+	v &= ~PLLDIV_RATIO_MASK;
+	v |= ratio | PLLDIV_EN;
+	__raw_writel(v, pll->base + clk->div_reg);
+
+	v = __raw_readl(pll->base + PLLCMD);
+	v |= PLLCMD_GOSET;
+	__raw_writel(v, pll->base + PLLCMD);
+
+	do {
+		v = __raw_readl(pll->base + PLLSTAT);
+	} while (v & PLLSTAT_GOSTAT);
+
+	return 0;
+}
+EXPORT_SYMBOL(davinci_set_sysclk_rate);
+
 static unsigned long clk_leafclk_recalc(struct clk *clk)
 {
 	if (WARN_ON(!clk->parent))
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 01e36483ac3d..11099980b58b 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -70,6 +70,9 @@
 #include <linux/list.h>
 #include <asm/clkdev.h>
 
+#define PLLSTAT_GOSTAT	BIT(0)
+#define PLLCMD_GOSET	BIT(0)
+
 struct pll_data {
 	u32 phys_base;
 	void __iomem *base;
@@ -86,6 +89,7 @@ struct clk {
 	struct module		*owner;
 	const char		*name;
 	unsigned long		rate;
+	unsigned long		maxrate;	/* H/W supported max rate */
 	u8			usecount;
 	u8			lpsc;
 	u8			gpsc;
@@ -118,6 +122,7 @@ struct clk {
 int davinci_clk_init(struct clk_lookup *clocks);
 int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
 				unsigned int mult, unsigned int postdiv);
+int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
 
 extern struct platform_device davinci_wdt_device;
 extern void davinci_watchdog_reset(struct platform_device *);
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index d3fa6de1e20f..343de73161fa 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -34,6 +34,8 @@
 struct davinci_cpufreq {
 	struct device *dev;
 	struct clk *armclk;
+	struct clk *asyncclk;
+	unsigned long asyncrate;
 };
 static struct davinci_cpufreq cpufreq;
 
@@ -104,15 +106,27 @@ static int davinci_target(struct cpufreq_policy *policy,
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	/* if moving to higher frequency, up the voltage beforehand */
-	if (pdata->set_voltage && freqs.new > freqs.old)
-		pdata->set_voltage(idx);
+	if (pdata->set_voltage && freqs.new > freqs.old) {
+		ret = pdata->set_voltage(idx);
+		if (ret)
+			goto out;
+	}
 
 	ret = clk_set_rate(armclk, idx);
+	if (ret)
+		goto out;
+
+	if (cpufreq.asyncclk) {
+		ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate);
+		if (ret)
+			goto out;
+	}
 
 	/* if moving to lower freq, lower the voltage after lowering freq */
 	if (pdata->set_voltage && freqs.new < freqs.old)
 		pdata->set_voltage(idx);
 
+out:
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	return ret;
@@ -185,6 +199,7 @@ static struct cpufreq_driver davinci_driver = {
 static int __init davinci_cpufreq_probe(struct platform_device *pdev)
 {
 	struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
+	struct clk *asyncclk;
 
 	if (!pdata)
 		return -EINVAL;
@@ -199,6 +214,12 @@ static int __init davinci_cpufreq_probe(struct platform_device *pdev)
 		return PTR_ERR(cpufreq.armclk);
 	}
 
+	asyncclk = clk_get(cpufreq.dev, "async");
+	if (!IS_ERR(asyncclk)) {
+		cpufreq.asyncclk = asyncclk;
+		cpufreq.asyncrate = clk_get_rate(asyncclk);
+	}
+
 	return cpufreq_register_driver(&davinci_driver);
 }
 
@@ -206,6 +227,9 @@ static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
 {
 	clk_put(cpufreq.armclk);
 
+	if (cpufreq.asyncclk)
+		clk_put(cpufreq.asyncclk);
+
 	return cpufreq_unregister_driver(&davinci_driver);
 }
 
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 23e9eda5a377..ec23ab473620 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1024,7 +1024,6 @@ static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_EVTOUT4]		= 7,
 	[IRQ_DA8XX_EVTOUT5]		= 7,
 	[IRQ_DA8XX_EVTOUT6]		= 7,
-	[IRQ_DA8XX_EVTOUT6]		= 7,
 	[IRQ_DA8XX_EVTOUT7]		= 7,
 	[IRQ_DA8XX_CCINT0]		= 7,
 	[IRQ_DA8XX_CCERRINT]		= 7,
@@ -1042,11 +1041,7 @@ static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_TINT34_1]		= 7,
 	[IRQ_DA8XX_UARTINT0]		= 7,
 	[IRQ_DA8XX_KEYMGRINT]		= 7,
-	[IRQ_DA8XX_SECINT]		= 7,
-	[IRQ_DA8XX_SECKEYERR]		= 7,
 	[IRQ_DA830_MPUERR]		= 7,
-	[IRQ_DA830_IOPUERR]		= 7,
-	[IRQ_DA830_BOOTCFGERR]		= 7,
 	[IRQ_DA8XX_CHIPINT0]		= 7,
 	[IRQ_DA8XX_CHIPINT1]		= 7,
 	[IRQ_DA8XX_CHIPINT2]		= 7,
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 6b8331bf8cf3..63916b902760 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -86,6 +86,8 @@ static struct clk pll0_sysclk3 = {
 	.parent		= &pll0_clk,
 	.flags		= CLK_PLL,
 	.div_reg	= PLLDIV3,
+	.set_rate	= davinci_set_sysclk_rate,
+	.maxrate	= 100000000,
 };
 
 static struct clk pll0_sysclk4 = {
@@ -323,12 +325,19 @@ static struct clk lcdc_clk = {
 	.gpsc		= 1,
 };
 
-static struct clk mmcsd_clk = {
-	.name		= "mmcsd",
+static struct clk mmcsd0_clk = {
+	.name		= "mmcsd0",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC0_MMC_SD,
 };
 
+static struct clk mmcsd1_clk = {
+	.name		= "mmcsd1",
+	.parent		= &pll0_sysclk2,
+	.lpsc		= DA850_LPSC1_MMC_SD1,
+	.gpsc		= 1,
+};
+
 static struct clk aemif_clk = {
 	.name		= "aemif",
 	.parent		= &pll0_sysclk3,
@@ -375,7 +384,8 @@ static struct clk_lookup da850_clks[] = {
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
-	CLK("davinci_mmc.0",	NULL,		&mmcsd_clk),
+	CLK("davinci_mmc.0",	NULL,		&mmcsd0_clk),
+	CLK("davinci_mmc.1",	NULL,		&mmcsd1_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		NULL,		NULL),
 };
@@ -572,15 +582,9 @@ const short da850_cpgmac_pins[] __initdata = {
 	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
 	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
 	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-const short da850_rmii_pins[] __initdata = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
+	DA850_MDIO_D, DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
+	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1, DA850_RMII_RXER,
+	DA850_RMII_MHZ_50_CLK,
 	-1
 };
 
@@ -607,27 +611,19 @@ const short da850_mmcsd0_pins[] __initdata = {
 	-1
 };
 
-const short da850_nand_pins[] __initdata = {
-	DA850_EMA_D_7, DA850_EMA_D_6, DA850_EMA_D_5, DA850_EMA_D_4,
-	DA850_EMA_D_3, DA850_EMA_D_2, DA850_EMA_D_1, DA850_EMA_D_0,
-	DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
-	DA850_NEMA_WE, DA850_NEMA_OE,
-	-1
-};
-
-const short da850_nor_pins[] __initdata = {
+const short da850_emif25_pins[] __initdata = {
 	DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
-	DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
-	DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
-	DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
-	DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
-	DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
-	DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
-	DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
-	DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
-	DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
-	DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
-	DA850_EMA_A_22, DA850_EMA_A_23,
+	DA850_NEMA_CS_3, DA850_NEMA_CS_4, DA850_NEMA_WE, DA850_NEMA_OE,
+	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
+	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
+	DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11,
+	DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15,
+	DA850_EMA_A_0, DA850_EMA_A_1, DA850_EMA_A_2, DA850_EMA_A_3,
+	DA850_EMA_A_4, DA850_EMA_A_5, DA850_EMA_A_6, DA850_EMA_A_7,
+	DA850_EMA_A_8, DA850_EMA_A_9, DA850_EMA_A_10, DA850_EMA_A_11,
+	DA850_EMA_A_12, DA850_EMA_A_13, DA850_EMA_A_14, DA850_EMA_A_15,
+	DA850_EMA_A_16, DA850_EMA_A_17, DA850_EMA_A_18, DA850_EMA_A_19,
+	DA850_EMA_A_20, DA850_EMA_A_21, DA850_EMA_A_22, DA850_EMA_A_23,
 	-1
 };
 
@@ -643,7 +639,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_EVTOUT4]		= 7,
 	[IRQ_DA8XX_EVTOUT5]		= 7,
 	[IRQ_DA8XX_EVTOUT6]		= 7,
-	[IRQ_DA8XX_EVTOUT6]		= 7,
 	[IRQ_DA8XX_EVTOUT7]		= 7,
 	[IRQ_DA8XX_CCINT0]		= 7,
 	[IRQ_DA8XX_CCERRINT]		= 7,
@@ -661,27 +656,7 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_TINT34_1]		= 7,
 	[IRQ_DA8XX_UARTINT0]		= 7,
 	[IRQ_DA8XX_KEYMGRINT]		= 7,
-	[IRQ_DA8XX_SECINT]		= 7,
-	[IRQ_DA8XX_SECKEYERR]		= 7,
 	[IRQ_DA850_MPUADDRERR0]		= 7,
-	[IRQ_DA850_MPUPROTERR0]		= 7,
-	[IRQ_DA850_IOPUADDRERR0]	= 7,
-	[IRQ_DA850_IOPUPROTERR0]	= 7,
-	[IRQ_DA850_IOPUADDRERR1]	= 7,
-	[IRQ_DA850_IOPUPROTERR1]	= 7,
-	[IRQ_DA850_IOPUADDRERR2]	= 7,
-	[IRQ_DA850_IOPUPROTERR2]	= 7,
-	[IRQ_DA850_BOOTCFG_ADDR_ERR]	= 7,
-	[IRQ_DA850_BOOTCFG_PROT_ERR]	= 7,
-	[IRQ_DA850_MPUADDRERR1]		= 7,
-	[IRQ_DA850_MPUPROTERR1]		= 7,
-	[IRQ_DA850_IOPUADDRERR3]	= 7,
-	[IRQ_DA850_IOPUPROTERR3]	= 7,
-	[IRQ_DA850_IOPUADDRERR4]	= 7,
-	[IRQ_DA850_IOPUPROTERR4]	= 7,
-	[IRQ_DA850_IOPUADDRERR5]	= 7,
-	[IRQ_DA850_IOPUPROTERR5]	= 7,
-	[IRQ_DA850_MIOPU_BOOTCFG_ERR]	= 7,
 	[IRQ_DA8XX_CHIPINT0]		= 7,
 	[IRQ_DA8XX_CHIPINT1]		= 7,
 	[IRQ_DA8XX_CHIPINT2]		= 7,
@@ -722,8 +697,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_EHRPWM1]		= 7,
 	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
 	[IRQ_DA850_SATAINT]		= 7,
-	[IRQ_DA850_TINT12_2]		= 7,
-	[IRQ_DA850_TINT34_2]		= 7,
 	[IRQ_DA850_TINTALL_2]		= 7,
 	[IRQ_DA8XX_ECAP0]		= 7,
 	[IRQ_DA8XX_ECAP1]		= 7,
@@ -751,8 +724,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA850_CCINT1]		= 7,
 	[IRQ_DA850_CCERRINT1]		= 7,
 	[IRQ_DA850_TCERRINT2]		= 7,
-	[IRQ_DA850_TINT12_3]		= 7,
-	[IRQ_DA850_TINT34_3]		= 7,
 	[IRQ_DA850_TINTALL_3]		= 7,
 	[IRQ_DA850_MCBSP0RINT]		= 7,
 	[IRQ_DA850_MCBSP0XINT]		= 7,
@@ -876,7 +847,7 @@ static const struct da850_opp da850_opp_300 = {
 	.prediv		= 1,
 	.mult		= 25,
 	.postdiv	= 2,
-	.cvdd_min	= 1140000,
+	.cvdd_min	= 1200000,
 	.cvdd_max	= 1320000,
 };
 
@@ -885,7 +856,7 @@ static const struct da850_opp da850_opp_200 = {
 	.prediv		= 1,
 	.mult		= 25,
 	.postdiv	= 3,
-	.cvdd_min	= 1050000,
+	.cvdd_min	= 1100000,
 	.cvdd_max	= 1160000,
 };
 
@@ -894,7 +865,7 @@ static const struct da850_opp da850_opp_96 = {
 	.prediv		= 1,
 	.mult		= 20,
 	.postdiv	= 5,
-	.cvdd_min	= 950000,
+	.cvdd_min	= 1000000,
 	.cvdd_max	= 1050000,
 };
 
@@ -954,10 +925,16 @@ static struct platform_device da850_cpufreq_device = {
 	.dev = {
 		.platform_data	= &cpufreq_info,
 	},
+	.id = -1,
 };
 
-int __init da850_register_cpufreq(void)
+int __init da850_register_cpufreq(char *async_clk)
 {
+	/* cpufreq driver can help keep an "async" clock constant */
+	if (async_clk)
+		clk_add_alias("async", da850_cpufreq_device.name,
+							async_clk, NULL);
+
 	return platform_device_register(&da850_cpufreq_device);
 }
 
@@ -1008,7 +985,7 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index)
 	return 0;
 }
 #else
-int __init da850_register_cpufreq(void)
+int __init da850_register_cpufreq(char *async_clk)
 {
 	return 0;
 }
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 8cda729be273..9eec63070e0c 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -24,6 +24,7 @@
 #include "clock.h"
 
 #define DA8XX_TPCC_BASE			0x01c00000
+#define DA850_MMCSD1_BASE		0x01e1b000
 #define DA850_TPCC1_BASE		0x01e30000
 #define DA8XX_TPTC0_BASE		0x01c08000
 #define DA8XX_TPTC1_BASE		0x01c08400
@@ -41,7 +42,6 @@
 #define DA8XX_EMAC_CTRL_REG_OFFSET	0x3000
 #define DA8XX_EMAC_MOD_REG_OFFSET	0x2000
 #define DA8XX_EMAC_RAM_OFFSET		0x0000
-#define DA8XX_MDIO_REG_OFFSET		0x4000
 #define DA8XX_EMAC_CTRL_RAM_SIZE	SZ_8K
 
 void __iomem *da8xx_syscfg0_base;
@@ -111,19 +111,21 @@ static const s8 da850_queue_priority_mapping[][2] = {
 	{-1, -1}
 };
 
-static struct edma_soc_info da830_edma_info[] = {
-	{
-		.n_channel		= 32,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 2,
-		.n_cc			= 1,
-		.queue_tc_mapping	= da8xx_queue_tc_mapping,
-		.queue_priority_mapping	= da8xx_queue_priority_mapping,
-	},
+static struct edma_soc_info da830_edma_cc0_info = {
+	.n_channel		= 32,
+	.n_region		= 4,
+	.n_slot			= 128,
+	.n_tc			= 2,
+	.n_cc			= 1,
+	.queue_tc_mapping	= da8xx_queue_tc_mapping,
+	.queue_priority_mapping	= da8xx_queue_priority_mapping,
+};
+
+static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
+	&da830_edma_cc0_info,
 };
 
-static struct edma_soc_info da850_edma_info[] = {
+static struct edma_soc_info da850_edma_cc_info[] = {
 	{
 		.n_channel		= 32,
 		.n_region		= 4,
@@ -144,6 +146,11 @@ static struct edma_soc_info da850_edma_info[] = {
 	},
 };
 
+static struct edma_soc_info *da850_edma_info[EDMA_MAX_CC] = {
+	&da850_edma_cc_info[0],
+	&da850_edma_cc_info[1],
+};
+
 static struct resource da830_edma_resources[] = {
 	{
 		.name	= "edma_cc0",
@@ -248,18 +255,21 @@ static struct platform_device da850_edma_device = {
 	.resource	= da850_edma_resources,
 };
 
-int __init da8xx_register_edma(void)
+int __init da830_register_edma(struct edma_rsv_info *rsv)
 {
-	struct platform_device *pdev;
+	da830_edma_cc0_info.rsv = rsv;
 
-	if (cpu_is_davinci_da830())
-		pdev = &da830_edma_device;
-	else if (cpu_is_davinci_da850())
-		pdev = &da850_edma_device;
-	else
-		return -ENODEV;
+	return platform_device_register(&da830_edma_device);
+}
 
-	return platform_device_register(pdev);
+int __init da850_register_edma(struct edma_rsv_info *rsv[2])
+{
+	if (rsv) {
+		da850_edma_cc_info[0].rsv = rsv[0];
+		da850_edma_cc_info[1].rsv = rsv[1];
+	}
+
+	return platform_device_register(&da850_edma_device);
 }
 
 static struct resource da8xx_i2c_resources0[] = {
@@ -341,7 +351,7 @@ int __init da8xx_register_watchdog(void)
 static struct resource da8xx_emac_resources[] = {
 	{
 		.start	= DA8XX_EMAC_CPPI_PORT_BASE,
-		.end	= DA8XX_EMAC_CPPI_PORT_BASE + 0x5000 - 1,
+		.end	= DA8XX_EMAC_CPPI_PORT_BASE + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -370,7 +380,6 @@ struct emac_platform_data da8xx_emac_pdata = {
 	.ctrl_reg_offset	= DA8XX_EMAC_CTRL_REG_OFFSET,
 	.ctrl_mod_reg_offset	= DA8XX_EMAC_MOD_REG_OFFSET,
 	.ctrl_ram_offset	= DA8XX_EMAC_RAM_OFFSET,
-	.mdio_reg_offset	= DA8XX_MDIO_REG_OFFSET,
 	.ctrl_ram_size		= DA8XX_EMAC_CTRL_RAM_SIZE,
 	.version		= EMAC_VERSION_2,
 };
@@ -385,9 +394,34 @@ static struct platform_device da8xx_emac_device = {
 	.resource	= da8xx_emac_resources,
 };
 
+static struct resource da8xx_mdio_resources[] = {
+	{
+		.start	= DA8XX_EMAC_MDIO_BASE,
+		.end	= DA8XX_EMAC_MDIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da8xx_mdio_device = {
+	.name		= "davinci_mdio",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(da8xx_mdio_resources),
+	.resource	= da8xx_mdio_resources,
+};
+
 int __init da8xx_register_emac(void)
 {
-	return platform_device_register(&da8xx_emac_device);
+	int ret;
+
+	ret = platform_device_register(&da8xx_mdio_device);
+	if (ret < 0)
+		return ret;
+	ret = platform_device_register(&da8xx_emac_device);
+	if (ret < 0)
+		return ret;
+	ret = clk_add_alias(NULL, dev_name(&da8xx_mdio_device.dev),
+			    NULL, &da8xx_emac_device.dev);
+	return ret;
 }
 
 static struct resource da830_mcasp1_resources[] = {
@@ -556,6 +590,44 @@ int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
 	return platform_device_register(&da8xx_mmcsd0_device);
 }
 
+#ifdef CONFIG_ARCH_DAVINCI_DA850
+static struct resource da850_mmcsd1_resources[] = {
+	{		/* registers */
+		.start	= DA850_MMCSD1_BASE,
+		.end	= DA850_MMCSD1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{		/* interrupt */
+		.start	= IRQ_DA850_MMCSDINT0_1,
+		.end	= IRQ_DA850_MMCSDINT0_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{		/* DMA RX */
+		.start	= EDMA_CTLR_CHAN(1, 28),
+		.end	= EDMA_CTLR_CHAN(1, 28),
+		.flags	= IORESOURCE_DMA,
+	},
+	{		/* DMA TX */
+		.start	= EDMA_CTLR_CHAN(1, 29),
+		.end	= EDMA_CTLR_CHAN(1, 29),
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device da850_mmcsd1_device = {
+	.name		= "davinci_mmc",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(da850_mmcsd1_resources),
+	.resource	= da850_mmcsd1_resources,
+};
+
+int __init da850_register_mmcsd1(struct davinci_mmc_config *config)
+{
+	da850_mmcsd1_device.dev.platform_data = config;
+	return platform_device_register(&da850_mmcsd1_device);
+}
+#endif
+
 static struct resource da8xx_rtc_resources[] = {
 	{
 		.start		= DA8XX_RTC_BASE,
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
new file mode 100644
index 000000000000..c9a86d8130d1
--- /dev/null
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -0,0 +1,370 @@
+/*
+ * Texas Instruments TNETV107X SoC devices
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/tnetv107x.h>
+
+#include "clock.h"
+
+/* Base addresses for on-chip devices */
+#define TNETV107X_TPCC_BASE			0x01c00000
+#define TNETV107X_TPTC0_BASE			0x01c10000
+#define TNETV107X_TPTC1_BASE			0x01c10400
+#define TNETV107X_WDOG_BASE			0x08086700
+#define TNETV107X_TSC_BASE			0x08088500
+#define TNETV107X_SDIO0_BASE			0x08088700
+#define TNETV107X_SDIO1_BASE			0x08088800
+#define TNETV107X_KEYPAD_BASE			0x08088a00
+#define TNETV107X_ASYNC_EMIF_CNTRL_BASE		0x08200000
+#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE	0x30000000
+#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE	0x40000000
+#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE	0x44000000
+#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE	0x48000000
+
+/* TNETV107X specific EDMA3 information */
+#define EDMA_TNETV107X_NUM_DMACH	64
+#define EDMA_TNETV107X_NUM_TCC		64
+#define EDMA_TNETV107X_NUM_PARAMENTRY	128
+#define EDMA_TNETV107X_NUM_EVQUE	2
+#define EDMA_TNETV107X_NUM_TC		2
+#define EDMA_TNETV107X_CHMAP_EXIST	0
+#define EDMA_TNETV107X_NUM_REGIONS	4
+#define TNETV107X_DMACH2EVENT_MAP0	0x3C0CE000u
+#define TNETV107X_DMACH2EVENT_MAP1	0x000FFFFFu
+
+#define TNETV107X_DMACH_SDIO0_RX		26
+#define TNETV107X_DMACH_SDIO0_TX		27
+#define TNETV107X_DMACH_SDIO1_RX		28
+#define TNETV107X_DMACH_SDIO1_TX		29
+
+static const s8 edma_tc_mapping[][2] = {
+	/* event queue no	TC no	*/
+	{	 0,		 0	},
+	{	 1,		 1	},
+	{	-1,		-1	}
+};
+
+static const s8 edma_priority_mapping[][2] = {
+	/* event queue no	Prio	*/
+	{	 0,		 3	},
+	{	 1,		 7	},
+	{	-1,		-1	}
+};
+
+static struct edma_soc_info edma_cc0_info = {
+	.n_channel		= EDMA_TNETV107X_NUM_DMACH,
+	.n_region		= EDMA_TNETV107X_NUM_REGIONS,
+	.n_slot			= EDMA_TNETV107X_NUM_PARAMENTRY,
+	.n_tc			= EDMA_TNETV107X_NUM_TC,
+	.n_cc			= 1,
+	.queue_tc_mapping	= edma_tc_mapping,
+	.queue_priority_mapping	= edma_priority_mapping,
+};
+
+static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = {
+	&edma_cc0_info,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc0",
+		.start	= TNETV107X_TPCC_BASE,
+		.end	= TNETV107X_TPCC_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= TNETV107X_TPTC0_BASE,
+		.end	= TNETV107X_TPTC0_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= TNETV107X_TPTC1_BASE,
+		.end	= TNETV107X_TPTC1_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma0",
+		.start	= IRQ_TNETV107X_TPCC,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma0_err",
+		.start	= IRQ_TNETV107X_TPCC_ERR,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device edma_device = {
+	.name		= "edma",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(edma_resources),
+	.resource	= edma_resources,
+	.dev.platform_data = tnetv107x_edma_info,
+};
+
+static struct plat_serial8250_port serial_data[] = {
+	{
+		.mapbase	= TNETV107X_UART0_BASE,
+		.irq		= IRQ_TNETV107X_UART0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_FIXED_TYPE | UPF_IOREMAP,
+		.type		= PORT_AR7,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= TNETV107X_UART1_BASE,
+		.irq		= IRQ_TNETV107X_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_FIXED_TYPE | UPF_IOREMAP,
+		.type		= PORT_AR7,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= TNETV107X_UART2_BASE,
+		.irq		= IRQ_TNETV107X_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_FIXED_TYPE | UPF_IOREMAP,
+		.type		= PORT_AR7,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.flags	= 0,
+	},
+};
+
+struct platform_device tnetv107x_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= serial_data,
+};
+
+static struct resource mmc0_resources[] = {
+	{ /* Memory mapped registers */
+		.start	= TNETV107X_SDIO0_BASE,
+		.end	= TNETV107X_SDIO0_BASE + 0x0ff,
+		.flags	= IORESOURCE_MEM
+	},
+	{ /* MMC interrupt */
+		.start	= IRQ_TNETV107X_MMC0,
+		.flags	= IORESOURCE_IRQ
+	},
+	{ /* SDIO interrupt */
+		.start	= IRQ_TNETV107X_SDIO0,
+		.flags	= IORESOURCE_IRQ
+	},
+	{ /* DMA RX */
+		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_RX),
+		.flags	= IORESOURCE_DMA
+	},
+	{ /* DMA TX */
+		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_TX),
+		.flags	= IORESOURCE_DMA
+	},
+};
+
+static struct resource mmc1_resources[] = {
+	{ /* Memory mapped registers */
+		.start	= TNETV107X_SDIO1_BASE,
+		.end	= TNETV107X_SDIO1_BASE + 0x0ff,
+		.flags	= IORESOURCE_MEM
+	},
+	{ /* MMC interrupt */
+		.start	= IRQ_TNETV107X_MMC1,
+		.flags	= IORESOURCE_IRQ
+	},
+	{ /* SDIO interrupt */
+		.start	= IRQ_TNETV107X_SDIO1,
+		.flags	= IORESOURCE_IRQ
+	},
+	{ /* DMA RX */
+		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_RX),
+		.flags	= IORESOURCE_DMA
+	},
+	{ /* DMA TX */
+		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_TX),
+		.flags	= IORESOURCE_DMA
+	},
+};
+
+static u64 mmc0_dma_mask = DMA_BIT_MASK(32);
+static u64 mmc1_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device mmc_devices[2] = {
+	{
+		.name		= "davinci_mmc",
+		.id		= 0,
+		.dev		= {
+			.dma_mask		= &mmc0_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+		},
+		.num_resources	= ARRAY_SIZE(mmc0_resources),
+		.resource	= mmc0_resources
+	},
+	{
+		.name		= "davinci_mmc",
+		.id		= 1,
+		.dev		= {
+			.dma_mask		= &mmc1_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+		},
+		.num_resources	= ARRAY_SIZE(mmc1_resources),
+		.resource	= mmc1_resources
+	},
+};
+
+static const u32 emif_windows[] = {
+	TNETV107X_ASYNC_EMIF_DATA_CE0_BASE, TNETV107X_ASYNC_EMIF_DATA_CE1_BASE,
+	TNETV107X_ASYNC_EMIF_DATA_CE2_BASE, TNETV107X_ASYNC_EMIF_DATA_CE3_BASE,
+};
+
+static const u32 emif_window_sizes[] = { SZ_256M, SZ_64M, SZ_64M, SZ_64M };
+
+static struct resource wdt_resources[] = {
+	{
+		.start	= TNETV107X_WDOG_BASE,
+		.end	= TNETV107X_WDOG_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device tnetv107x_wdt_device = {
+	.name		= "tnetv107x_wdt",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static int __init nand_init(int chipsel, struct davinci_nand_pdata *data)
+{
+	struct resource res[2];
+	struct platform_device *pdev;
+	u32	range;
+	int	ret;
+
+	/* Figure out the resource range from the ale/cle masks */
+	range = max(data->mask_cle, data->mask_ale);
+	range = PAGE_ALIGN(range + 4) - 1;
+
+	if (range >= emif_window_sizes[chipsel])
+		return -EINVAL;
+
+	pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+	if (!pdev)
+		return -ENOMEM;
+
+	pdev->name		= "davinci_nand";
+	pdev->id		= chipsel;
+	pdev->dev.platform_data	= data;
+
+	memset(res, 0, sizeof(res));
+
+	res[0].start	= emif_windows[chipsel];
+	res[0].end	= res[0].start + range;
+	res[0].flags	= IORESOURCE_MEM;
+
+	res[1].start	= TNETV107X_ASYNC_EMIF_CNTRL_BASE;
+	res[1].end	= res[1].start + SZ_4K - 1;
+	res[1].flags	= IORESOURCE_MEM;
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret < 0) {
+		kfree(pdev);
+		return ret;
+	}
+
+	return platform_device_register(pdev);
+}
+
+static struct resource keypad_resources[] = {
+	{
+		.start	= TNETV107X_KEYPAD_BASE,
+		.end	= TNETV107X_KEYPAD_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TNETV107X_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "press",
+	},
+	{
+		.start	= IRQ_TNETV107X_KEYPAD_FREE,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "release",
+	},
+};
+
+static struct platform_device keypad_device = {
+	.name		= "tnetv107x-keypad",
+	.num_resources	= ARRAY_SIZE(keypad_resources),
+	.resource	= keypad_resources,
+};
+
+static struct resource tsc_resources[] = {
+	{
+		.start	= TNETV107X_TSC_BASE,
+		.end	= TNETV107X_TSC_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_TNETV107X_TSC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tsc_device = {
+	.name		= "tnetv107x-ts",
+	.num_resources	= ARRAY_SIZE(tsc_resources),
+	.resource	= tsc_resources,
+};
+
+void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
+{
+	int i;
+
+	platform_device_register(&edma_device);
+	platform_device_register(&tnetv107x_wdt_device);
+	platform_device_register(&tsc_device);
+
+	if (info->serial_config)
+		davinci_serial_init(info->serial_config);
+
+	for (i = 0; i < 2; i++)
+		if (info->mmc_config[i]) {
+			mmc_devices[i].dev.platform_data = info->mmc_config[i];
+			platform_device_register(&mmc_devices[i]);
+		}
+
+	for (i = 0; i < 4; i++)
+		if (info->nand_config[i])
+			nand_init(i, info->nand_config[i]);
+
+	if (info->keypad_config) {
+		keypad_device.dev.platform_data = info->keypad_config;
+		platform_device_register(&keypad_device);
+	}
+}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 8b7201e4c79c..22ebc64bc9d9 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -213,7 +213,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c);
 
 			/* Configure pull down control */
-			__raw_writel((__raw_readl(pupdctl1) & ~0x400),
+			__raw_writel((__raw_readl(pupdctl1) & ~0xfc0),
 					pupdctl1);
 
 			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
@@ -295,6 +295,18 @@ static void davinci_init_wdt(void)
 
 /*-------------------------------------------------------------------------*/
 
+struct platform_device davinci_pcm_device = {
+	.name		= "davinci-pcm-audio",
+	.id		= -1,
+};
+
+static void davinci_init_pcm(void)
+{
+	platform_device_register(&davinci_pcm_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
 struct davinci_timer_instance davinci_timer_instance[2] = {
 	{
 		.base		= DAVINCI_TIMER0_BASE,
@@ -315,6 +327,7 @@ static int __init davinci_init_devices(void)
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
+	davinci_init_pcm();
 	davinci_init_wdt();
 
 	return 0;
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 383478116ef5..9be261beae7d 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -591,16 +591,18 @@ queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info dm355_edma_info[] = {
-	{
-		.n_channel		= 64,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 2,
-		.n_cc			= 1,
-		.queue_tc_mapping	= queue_tc_mapping,
-		.queue_priority_mapping	= queue_priority_mapping,
-	},
+static struct edma_soc_info edma_cc0_info = {
+	.n_channel		= 64,
+	.n_region		= 4,
+	.n_slot			= 128,
+	.n_tc			= 2,
+	.n_cc			= 1,
+	.queue_tc_mapping	= queue_tc_mapping,
+	.queue_priority_mapping	= queue_priority_mapping,
+};
+
+static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
+       &edma_cc0_info,
 };
 
 static struct resource edma_resources[] = {
@@ -767,8 +769,7 @@ static struct map_desc dm355_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index a146849d78f0..a12065e87266 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -691,7 +691,6 @@ static struct emac_platform_data dm365_emac_pdata = {
 	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
 	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
 	.ctrl_ram_offset	= DM365_EMAC_CNTRL_RAM_OFFSET,
-	.mdio_reg_offset	= DM365_EMAC_MDIO_OFFSET,
 	.ctrl_ram_size		= DM365_EMAC_CNTRL_RAM_SIZE,
 	.version		= EMAC_VERSION_2,
 };
@@ -699,7 +698,7 @@ static struct emac_platform_data dm365_emac_pdata = {
 static struct resource dm365_emac_resources[] = {
 	{
 		.start	= DM365_EMAC_BASE,
-		.end	= DM365_EMAC_BASE + 0x47ff,
+		.end	= DM365_EMAC_BASE + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -734,6 +733,21 @@ static struct platform_device dm365_emac_device = {
 	.resource	= dm365_emac_resources,
 };
 
+static struct resource dm365_mdio_resources[] = {
+	{
+		.start	= DM365_EMAC_MDIO_BASE,
+		.end	= DM365_EMAC_MDIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm365_mdio_device = {
+	.name		= "davinci_mdio",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm365_mdio_resources),
+	.resource	= dm365_mdio_resources,
+};
+
 static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_VDINT0]			= 2,
 	[IRQ_VDINT1]			= 6,
@@ -822,17 +836,19 @@ dm365_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info dm365_edma_info[] = {
-	{
-		.n_channel		= 64,
-		.n_region		= 4,
-		.n_slot			= 256,
-		.n_tc			= 4,
-		.n_cc			= 1,
-		.queue_tc_mapping	= dm365_queue_tc_mapping,
-		.queue_priority_mapping	= dm365_queue_priority_mapping,
-		.default_queue		= EVENTQ_3,
-	},
+static struct edma_soc_info edma_cc0_info = {
+	.n_channel		= 64,
+	.n_region		= 4,
+	.n_slot			= 256,
+	.n_tc			= 4,
+	.n_cc			= 1,
+	.queue_tc_mapping	= dm365_queue_tc_mapping,
+	.queue_priority_mapping	= dm365_queue_priority_mapping,
+	.default_queue		= EVENTQ_3,
+};
+
+static struct edma_soc_info *dm365_edma_info[EDMA_MAX_CC] = {
+	&edma_cc0_info,
 };
 
 static struct resource edma_resources[] = {
@@ -967,8 +983,7 @@ static struct map_desc dm365_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 
@@ -1020,6 +1035,8 @@ static struct davinci_timer_info dm365_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
+#define DM365_UART1_BASE	(IO_PHYS + 0x106000)
+
 static struct plat_serial8250_port dm365_serial_platform_data[] = {
 	{
 		.mapbase	= DAVINCI_UART0_BASE,
@@ -1030,7 +1047,7 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
-		.mapbase	= DAVINCI_UART1_BASE,
+		.mapbase	= DM365_UART1_BASE,
 		.irq		= IRQ_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
 				  UPF_IOREMAP,
@@ -1216,7 +1233,12 @@ static int __init dm365_init_devices(void)
 
 	davinci_cfg_reg(DM365_INT_EDMA_CC);
 	platform_device_register(&dm365_edma_device);
+
+	platform_device_register(&dm365_mdio_device);
 	platform_device_register(&dm365_emac_device);
+	clk_add_alias(NULL, dev_name(&dm365_mdio_device.dev),
+		      NULL, &dm365_emac_device.dev);
+
 	/* Add isif clock alias */
 	clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL);
 	platform_device_register(&dm365_vpss_device);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 7ad15208b841..0608dd776a16 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -322,7 +322,6 @@ static struct emac_platform_data dm644x_emac_pdata = {
 	.ctrl_reg_offset	= DM644X_EMAC_CNTRL_OFFSET,
 	.ctrl_mod_reg_offset	= DM644X_EMAC_CNTRL_MOD_OFFSET,
 	.ctrl_ram_offset	= DM644X_EMAC_CNTRL_RAM_OFFSET,
-	.mdio_reg_offset	= DM644X_EMAC_MDIO_OFFSET,
 	.ctrl_ram_size		= DM644X_EMAC_CNTRL_RAM_SIZE,
 	.version		= EMAC_VERSION_1,
 };
@@ -330,7 +329,7 @@ static struct emac_platform_data dm644x_emac_pdata = {
 static struct resource dm644x_emac_resources[] = {
 	{
 		.start	= DM644X_EMAC_BASE,
-		.end	= DM644X_EMAC_BASE + 0x47ff,
+		.end	= DM644X_EMAC_BASE + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -350,6 +349,21 @@ static struct platform_device dm644x_emac_device = {
        .resource	= dm644x_emac_resources,
 };
 
+static struct resource dm644x_mdio_resources[] = {
+	{
+		.start	= DM644X_EMAC_MDIO_BASE,
+		.end	= DM644X_EMAC_MDIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm644x_mdio_device = {
+	.name		= "davinci_mdio",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm644x_mdio_resources),
+	.resource	= dm644x_mdio_resources,
+};
+
 /*
  * Device specific mux setup
  *
@@ -492,16 +506,18 @@ queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info dm644x_edma_info[] = {
-	{
-		.n_channel		= 64,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 2,
-		.n_cc			= 1,
-		.queue_tc_mapping	= queue_tc_mapping,
-		.queue_priority_mapping	= queue_priority_mapping,
-	},
+static struct edma_soc_info edma_cc0_info = {
+	.n_channel		= 64,
+	.n_region		= 4,
+	.n_slot			= 128,
+	.n_tc			= 2,
+	.n_cc			= 1,
+	.queue_tc_mapping	= queue_tc_mapping,
+	.queue_priority_mapping	= queue_priority_mapping,
+};
+
+static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
+	&edma_cc0_info,
 };
 
 static struct resource edma_resources[] = {
@@ -651,8 +667,7 @@ static struct map_desc dm644x_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00008000),
 		.length		= SZ_16K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 
@@ -775,7 +790,12 @@ static int __init dm644x_init_devices(void)
 	clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL);
 	clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL);
 	platform_device_register(&dm644x_edma_device);
+
+	platform_device_register(&dm644x_mdio_device);
 	platform_device_register(&dm644x_emac_device);
+	clk_add_alias(NULL, dev_name(&dm644x_mdio_device.dev),
+		      NULL, &dm644x_emac_device.dev);
+
 	platform_device_register(&dm644x_vpss_device);
 	platform_device_register(&dm644x_ccdc_dev);
 	platform_device_register(&vpfe_capture_dev);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 94045656cff6..1e0f809644bb 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -358,7 +358,6 @@ static struct emac_platform_data dm646x_emac_pdata = {
 	.ctrl_reg_offset	= DM646X_EMAC_CNTRL_OFFSET,
 	.ctrl_mod_reg_offset	= DM646X_EMAC_CNTRL_MOD_OFFSET,
 	.ctrl_ram_offset	= DM646X_EMAC_CNTRL_RAM_OFFSET,
-	.mdio_reg_offset	= DM646X_EMAC_MDIO_OFFSET,
 	.ctrl_ram_size		= DM646X_EMAC_CNTRL_RAM_SIZE,
 	.version		= EMAC_VERSION_2,
 };
@@ -366,7 +365,7 @@ static struct emac_platform_data dm646x_emac_pdata = {
 static struct resource dm646x_emac_resources[] = {
 	{
 		.start	= DM646X_EMAC_BASE,
-		.end	= DM646X_EMAC_BASE + 0x47ff,
+		.end	= DM646X_EMAC_BASE + SZ_16K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -401,6 +400,21 @@ static struct platform_device dm646x_emac_device = {
 	.resource	= dm646x_emac_resources,
 };
 
+static struct resource dm646x_mdio_resources[] = {
+	{
+		.start	= DM646X_EMAC_MDIO_BASE,
+		.end	= DM646X_EMAC_MDIO_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm646x_mdio_device = {
+	.name		= "davinci_mdio",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm646x_mdio_resources),
+	.resource	= dm646x_mdio_resources,
+};
+
 /*
  * Device specific mux setup
  *
@@ -529,16 +543,18 @@ dm646x_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info dm646x_edma_info[] = {
-	{
-		.n_channel		= 64,
-		.n_region		= 6,	/* 0-1, 4-7 */
-		.n_slot			= 512,
-		.n_tc			= 4,
-		.n_cc			= 1,
-		.queue_tc_mapping	= dm646x_queue_tc_mapping,
-		.queue_priority_mapping	= dm646x_queue_priority_mapping,
-	},
+static struct edma_soc_info edma_cc0_info = {
+	.n_channel		= 64,
+	.n_region		= 6,	/* 0-1, 4-7 */
+	.n_slot			= 512,
+	.n_tc			= 4,
+	.n_cc			= 1,
+	.queue_tc_mapping	= dm646x_queue_tc_mapping,
+	.queue_priority_mapping	= dm646x_queue_priority_mapping,
+};
+
+static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
+	&edma_cc0_info,
 };
 
 static struct resource edma_resources[] = {
@@ -735,8 +751,7 @@ static struct map_desc dm646x_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 
@@ -877,6 +892,13 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config,
 	platform_device_register(&vpif_capture_dev);
 }
 
+int __init dm646x_init_edma(struct edma_rsv_info *rsv)
+{
+	edma_cc0_info.rsv = rsv;
+
+	return platform_device_register(&dm646x_edma_device);
+}
+
 void __init dm646x_init(void)
 {
 	dm646x_board_setup_refclk(&ref_clk);
@@ -888,8 +910,11 @@ static int __init dm646x_init_devices(void)
 	if (!cpu_is_davinci_dm646x())
 		return 0;
 
-	platform_device_register(&dm646x_edma_device);
+	platform_device_register(&dm646x_mdio_device);
 	platform_device_register(&dm646x_emac_device);
+	clk_add_alias(NULL, dev_name(&dm646x_mdio_device.dev),
+		      NULL, &dm646x_emac_device.dev);
+
 	return 0;
 }
 postcore_initcall(dm646x_init_devices);
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index d33827aadda7..6b9669869c46 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -99,8 +99,6 @@
 
 #define EDMA_MAX_DMACH           64
 #define EDMA_MAX_PARAMENTRY     512
-#define EDMA_MAX_CC               2
-
 
 /*****************************************************************************/
 
@@ -207,6 +205,18 @@ static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
 	edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
 }
 
+static inline void set_bits(int offset, int len, unsigned long *p)
+{
+	for (; len > 0; len--)
+		set_bit(offset + (len - 1), p);
+}
+
+static inline void clear_bits(int offset, int len, unsigned long *p)
+{
+	for (; len > 0; len--)
+		clear_bit(offset + (len - 1), p);
+}
+
 /*****************************************************************************/
 
 /* actual number of DMA channels and slots on this silicon */
@@ -344,10 +354,12 @@ static int irq2ctlr(int irq)
 static irqreturn_t dma_irq_handler(int irq, void *data)
 {
 	int i;
-	unsigned ctlr;
+	int ctlr;
 	unsigned int cnt = 0;
 
 	ctlr = irq2ctlr(irq);
+	if (ctlr < 0)
+		return IRQ_NONE;
 
 	dev_dbg(data, "dma_irq_handler\n");
 
@@ -398,10 +410,12 @@ static irqreturn_t dma_irq_handler(int irq, void *data)
 static irqreturn_t dma_ccerr_handler(int irq, void *data)
 {
 	int i;
-	unsigned ctlr;
+	int ctlr;
 	unsigned int cnt = 0;
 
 	ctlr = irq2ctlr(irq);
+	if (ctlr < 0)
+		return IRQ_NONE;
 
 	dev_dbg(data, "dma_ccerr_handler\n");
 
@@ -1376,11 +1390,13 @@ EXPORT_SYMBOL(edma_clear_event);
 
 static int __init edma_probe(struct platform_device *pdev)
 {
-	struct edma_soc_info	*info = pdev->dev.platform_data;
+	struct edma_soc_info	**info = pdev->dev.platform_data;
 	const s8		(*queue_priority_mapping)[2];
 	const s8		(*queue_tc_mapping)[2];
-	int			i, j, found = 0;
+	int			i, j, off, ln, found = 0;
 	int			status = -1;
+	const s16		(*rsv_chans)[2];
+	const s16		(*rsv_slots)[2];
 	int			irq[EDMA_MAX_CC] = {0, 0};
 	int			err_irq[EDMA_MAX_CC] = {0, 0};
 	struct resource		*r[EDMA_MAX_CC] = {NULL};
@@ -1395,7 +1411,7 @@ static int __init edma_probe(struct platform_device *pdev)
 		sprintf(res_name, "edma_cc%d", j);
 		r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 						res_name);
-		if (!r[j]) {
+		if (!r[j] || !info[j]) {
 			if (found)
 				break;
 			else
@@ -1426,13 +1442,14 @@ static int __init edma_probe(struct platform_device *pdev)
 		}
 		memset(edma_cc[j], 0, sizeof(struct edma));
 
-		edma_cc[j]->num_channels = min_t(unsigned, info[j].n_channel,
+		edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
 							EDMA_MAX_DMACH);
-		edma_cc[j]->num_slots = min_t(unsigned, info[j].n_slot,
+		edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot,
 							EDMA_MAX_PARAMENTRY);
-		edma_cc[j]->num_cc = min_t(unsigned, info[j].n_cc, EDMA_MAX_CC);
+		edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc,
+							EDMA_MAX_CC);
 
-		edma_cc[j]->default_queue = info[j].default_queue;
+		edma_cc[j]->default_queue = info[j]->default_queue;
 		if (!edma_cc[j]->default_queue)
 			edma_cc[j]->default_queue = EVENTQ_1;
 
@@ -1447,6 +1464,31 @@ static int __init edma_probe(struct platform_device *pdev)
 		memset(edma_cc[j]->edma_unused, 0xff,
 			sizeof(edma_cc[j]->edma_unused));
 
+		if (info[j]->rsv) {
+
+			/* Clear the reserved channels in unused list */
+			rsv_chans = info[j]->rsv->rsv_chans;
+			if (rsv_chans) {
+				for (i = 0; rsv_chans[i][0] != -1; i++) {
+					off = rsv_chans[i][0];
+					ln = rsv_chans[i][1];
+					clear_bits(off, ln,
+						edma_cc[j]->edma_unused);
+				}
+			}
+
+			/* Set the reserved slots in inuse list */
+			rsv_slots = info[j]->rsv->rsv_slots;
+			if (rsv_slots) {
+				for (i = 0; rsv_slots[i][0] != -1; i++) {
+					off = rsv_slots[i][0];
+					ln = rsv_slots[i][1];
+					set_bits(off, ln,
+						edma_cc[j]->edma_inuse);
+				}
+			}
+		}
+
 		sprintf(irq_name, "edma%d", j);
 		irq[j] = platform_get_irq_byname(pdev, irq_name);
 		edma_cc[j]->irq_res_start = irq[j];
@@ -1476,8 +1518,8 @@ static int __init edma_probe(struct platform_device *pdev)
 		for (i = 0; i < edma_cc[j]->num_channels; i++)
 			map_dmach_queue(j, i, EVENTQ_1);
 
-		queue_tc_mapping = info[j].queue_tc_mapping;
-		queue_priority_mapping = info[j].queue_priority_mapping;
+		queue_tc_mapping = info[j]->queue_tc_mapping;
+		queue_priority_mapping = info[j]->queue_priority_mapping;
 
 		/* Event queue to TC mapping */
 		for (i = 0; queue_tc_mapping[i][0] != -1; i++)
@@ -1496,7 +1538,7 @@ static int __init edma_probe(struct platform_device *pdev)
 		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
 			map_dmach_param(j);
 
-		for (i = 0; i < info[j].n_region; i++) {
+		for (i = 0; i < info[j]->n_region; i++) {
 			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
 			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
 			edma_write_array(j, EDMA_QRAE, i, 0x0);
diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/arch/arm/mach-davinci/gpio-tnetv107x.c
new file mode 100644
index 000000000000..d10298620e2c
--- /dev/null
+++ b/arch/arm/mach-davinci/gpio-tnetv107x.c
@@ -0,0 +1,205 @@
+/*
+ * Texas Instruments TNETV107X GPIO Controller
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <mach/common.h>
+#include <mach/tnetv107x.h>
+
+struct tnetv107x_gpio_regs {
+	u32	idver;
+	u32	data_in[3];
+	u32	data_out[3];
+	u32	direction[3];
+	u32	enable[3];
+};
+
+#define gpio_reg_index(gpio)	((gpio) >> 5)
+#define gpio_reg_bit(gpio)	BIT((gpio) & 0x1f)
+
+#define gpio_reg_rmw(reg, mask, val)	\
+	__raw_writel((__raw_readl(reg) & ~(mask)) | (val), (reg))
+
+#define gpio_reg_set_bit(reg, gpio)	\
+	gpio_reg_rmw((reg) + gpio_reg_index(gpio), 0, gpio_reg_bit(gpio))
+
+#define gpio_reg_clear_bit(reg, gpio)	\
+	gpio_reg_rmw((reg) + gpio_reg_index(gpio), gpio_reg_bit(gpio), 0)
+
+#define gpio_reg_get_bit(reg, gpio)	\
+	(__raw_readl((reg) + gpio_reg_index(gpio)) & gpio_reg_bit(gpio))
+
+#define chip2controller(chip)		\
+	container_of(chip, struct davinci_gpio_controller, chip)
+
+#define TNETV107X_GPIO_CTLRS	DIV_ROUND_UP(TNETV107X_N_GPIO, 32)
+
+static struct davinci_gpio_controller chips[TNETV107X_GPIO_CTLRS];
+
+static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_set_bit(&regs->enable, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_clear_bit(&regs->enable, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+}
+
+static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_set_bit(&regs->direction, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static int tnetv107x_gpio_dir_out(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	if (value)
+		gpio_reg_set_bit(&regs->data_out, gpio);
+	else
+		gpio_reg_clear_bit(&regs->data_out, gpio);
+
+	gpio_reg_clear_bit(&regs->direction, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	int ret;
+
+	ret = gpio_reg_get_bit(&regs->data_in, gpio);
+
+	return ret ? 1 : 0;
+}
+
+static void tnetv107x_gpio_set(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	if (value)
+		gpio_reg_set_bit(&regs->data_out, gpio);
+	else
+		gpio_reg_clear_bit(&regs->data_out, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+}
+
+static int __init tnetv107x_gpio_setup(void)
+{
+	int i, base;
+	unsigned ngpio;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct tnetv107x_gpio_regs *regs;
+	struct davinci_gpio_controller *ctlr;
+
+	if (soc_info->gpio_type != GPIO_TYPE_TNETV107X)
+		return 0;
+
+	ngpio = soc_info->gpio_num;
+	if (ngpio == 0) {
+		pr_err("GPIO setup:  how many GPIOs?\n");
+		return -EINVAL;
+	}
+
+	if (WARN_ON(TNETV107X_N_GPIO < ngpio))
+		ngpio = TNETV107X_N_GPIO;
+
+	regs = ioremap(soc_info->gpio_base, SZ_4K);
+	if (WARN_ON(!regs))
+		return -EINVAL;
+
+	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
+		ctlr = &chips[i];
+
+		ctlr->chip.label	= "tnetv107x";
+		ctlr->chip.can_sleep	= 0;
+		ctlr->chip.base		= base;
+		ctlr->chip.ngpio	= ngpio - base;
+		if (ctlr->chip.ngpio > 32)
+			ctlr->chip.ngpio = 32;
+
+		ctlr->chip.request		= tnetv107x_gpio_request;
+		ctlr->chip.free			= tnetv107x_gpio_free;
+		ctlr->chip.direction_input	= tnetv107x_gpio_dir_in;
+		ctlr->chip.get			= tnetv107x_gpio_get;
+		ctlr->chip.direction_output	= tnetv107x_gpio_dir_out;
+		ctlr->chip.set			= tnetv107x_gpio_set;
+
+		spin_lock_init(&ctlr->lock);
+
+		ctlr->regs	= regs;
+		ctlr->set_data	= &regs->data_out[i];
+		ctlr->clr_data	= &regs->data_out[i];
+		ctlr->in_data	= &regs->data_in[i];
+
+		gpiochip_add(&ctlr->chip);
+	}
+
+	soc_info->gpio_ctlrs = chips;
+	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+	return 0;
+}
+pure_initcall(tnetv107x_gpio_setup);
diff --git a/arch/arm/mach-davinci/include/mach/aemif.h b/arch/arm/mach-davinci/include/mach/aemif.h
new file mode 100644
index 000000000000..05b293443097
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/aemif.h
@@ -0,0 +1,36 @@
+/*
+ * TI DaVinci AEMIF support
+ *
+ * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef _MACH_DAVINCI_AEMIF_H
+#define _MACH_DAVINCI_AEMIF_H
+
+#define NRCSR_OFFSET		0x00
+#define AWCCR_OFFSET		0x04
+#define A1CR_OFFSET		0x10
+
+#define ACR_ASIZE_MASK		0x3
+#define ACR_EW_MASK		BIT(30)
+#define ACR_SS_MASK		BIT(31)
+
+/* All timings in nanoseconds */
+struct davinci_aemif_timing {
+	u8	wsetup;
+	u8	wstrobe;
+	u8	whold;
+
+	u8	rsetup;
+	u8	rstrobe;
+	u8	rhold;
+
+	u8	ta;
+};
+
+int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
+					void __iomem *base, unsigned cs);
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index 834725f1e81d..9aa240909a2c 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -52,7 +52,8 @@
 struct snd_platform_data {
 	u32 tx_dma_offset;
 	u32 rx_dma_offset;
-	enum dma_event_q eventq_no;	/* event queue number */
+	enum dma_event_q asp_chan_q;	/* event queue number for ASP channel */
+	enum dma_event_q ram_chan_q;	/* event queue number for RAM channel */
 	unsigned int codec_fmt;
 	/*
 	 * Allowing this is more efficient and eliminates left and right swaps
@@ -63,6 +64,49 @@ struct snd_platform_data {
 	unsigned sram_size_playback;
 	unsigned sram_size_capture;
 
+	/*
+	 * If McBSP peripheral gets the clock from an external pin,
+	 * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR
+	 * and MCBSP_CLKS.
+	 * Depending on different hardware connections it is possible
+	 * to use this setting to change the behaviour of McBSP
+	 * driver. The dm365_clk_input_pin enum is available for dm365
+	 */
+	int clk_input_pin;
+
+	/*
+	 * This flag works when both clock and FS are outputs for the cpu
+	 * and makes clock more accurate (FS is not symmetrical and the
+	 * clock is very fast.
+	 * The clock becoming faster is named
+	 * i2s continuous serial clock (I2S_SCK) and it is an externally
+	 * visible bit clock.
+	 *
+	 * first line : WordSelect
+	 * second line : ContinuousSerialClock
+	 * third line: SerialData
+	 *
+	 * SYMMETRICAL APPROACH:
+	 *   _______________________          LEFT
+	 * _|         RIGHT         |______________________|
+	 *     _   _         _   _   _   _         _   _
+	 *   _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_
+	 *     _   _         _   _   _   _         _   _
+	 *   _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_
+	 *    \_/ \_/       \_/ \_/ \_/ \_/       \_/ \_/
+	 *
+	 * ACCURATE CLOCK APPROACH:
+	 *   ______________          LEFT
+	 * _|     RIGHT    |_______________________________|
+	 *     _         _   _         _   _   _   _   _   _
+	 *   _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| |
+	 *     _         _   _          _      dummy cycles
+	 *   _/ \_ ... _/ \_/ \_  ... _/ \__________________
+	 *    \_/       \_/ \_/        \_/
+	 *
+	 */
+	bool i2s_accurate_sck;
+
 	/* McASP specific fields */
 	int tdm_slots;
 	u8 op_mode;
@@ -78,6 +122,11 @@ enum {
 	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
 };
 
+enum dm365_clk_input_pin {
+	MCBSP_CLKR = 0,		/* DM365 */
+	MCBSP_CLKS,
+};
+
 #define INACTIVE_MODE	0
 #define TX_MODE		1
 #define RX_MODE		2
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 1b31a9aa8fba..4247b3f53b33 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -67,7 +67,8 @@ extern void __iomem *da8xx_syscfg1_base;
 void __init da830_init(void);
 void __init da850_init(void);
 
-int da8xx_register_edma(void);
+int da830_register_edma(struct edma_rsv_info *rsv);
+int da850_register_edma(struct edma_rsv_info *rsv[2]);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_watchdog(void);
 int da8xx_register_usb20(unsigned mA, unsigned potpgt);
@@ -75,9 +76,10 @@ int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
 int da8xx_register_emac(void);
 int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
 int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
+int da850_register_mmcsd1(struct davinci_mmc_config *config);
 void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
 int da8xx_register_rtc(void);
-int da850_register_cpufreq(void);
+int da850_register_cpufreq(char *async_clk);
 int da8xx_register_cpuidle(void);
 void __iomem * __init da8xx_get_mem_ctlr(void);
 int da850_register_pm(struct platform_device *pdev);
@@ -120,11 +122,9 @@ extern const short da850_uart2_pins[];
 extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
 extern const short da850_cpgmac_pins[];
-extern const short da850_rmii_pins[];
 extern const short da850_mcasp_pins[];
 extern const short da850_lcdcntl_pins[];
 extern const short da850_mmcsd0_pins[];
-extern const short da850_nand_pins[];
-extern const short da850_nor_pins[];
+extern const short da850_emif25_pins[];
 
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 3cd93a801d9b..9f1befc5ac38 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -17,22 +17,54 @@
  */
 
 #include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+
+#include <mach/serial.h>
+
 #define UART_SHIFT	2
 
-		.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x01000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
-#error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) || \
-	defined(CONFIG_MACH_DAVINCI_DA850_EVM)
-		orr	\rx, \rx, #0x00d00000	@ physical base address
-		orr	\rx, \rx, #0x0000d000	@ of UART 2
-#else
-		orr	\rx, \rx, #0x00c20000   @ UART 0
-#endif
+		.pushsection .data
+davinci_uart_phys:	.word	0
+davinci_uart_virt:	.word	0
+		.popsection
+
+		.macro addruart, rp, rv
+
+		/* Use davinci_uart_phys/virt if already configured */
+10:		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =__virt_to_phys(davinci_uart_phys)
+		ldrne	\rp, =davinci_uart_phys
+		add	\rv, \rp, #4		@ davinci_uart_virt
+		ldr	\rp, [\rp, #0]
+		ldr	\rv, [\rv, #0]
+		cmp	\rp, #0			@ is port configured?
+		cmpne	\rv, #0
+		bne	99f			@ already configured
+
+		/* Check the debug UART address set in uncompress.h */
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+
+		/* Copy uart phys address from decompressor uart info */
+		ldreq	\rv, =__virt_to_phys(davinci_uart_phys)
+		ldrne	\rv, =davinci_uart_phys
+		ldreq	\rp, =DAVINCI_UART_INFO
+		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldr	\rp, [\rp, #0]
+		str	\rp, [\rv]
+
+		/* Copy uart virt address from decompressor uart info */
+		ldreq	\rv, =__virt_to_phys(davinci_uart_virt)
+		ldrne	\rv, =davinci_uart_virt
+		ldreq	\rp, =DAVINCI_UART_INFO
+		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldr	\rp, [\rp, #4]
+		str	\rp, [\rv]
+
+		b	10b
+99:
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
index ea5df3b49ec4..2563bf4e93a1 100644
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -21,10 +21,10 @@
 #include <media/davinci/vpfe_capture.h>
 
 #define DM365_EMAC_BASE			(0x01D07000)
+#define DM365_EMAC_MDIO_BASE		(DM365_EMAC_BASE + 0x4000)
 #define DM365_EMAC_CNTRL_OFFSET		(0x0000)
 #define DM365_EMAC_CNTRL_MOD_OFFSET	(0x3000)
 #define DM365_EMAC_CNTRL_RAM_OFFSET	(0x1000)
-#define DM365_EMAC_MDIO_OFFSET		(0x4000)
 #define DM365_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
 /* Base of key scan register bank */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 6fca568a0fd2..5a1b26d4e68b 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -28,10 +28,10 @@
 #include <media/davinci/vpfe_capture.h>
 
 #define DM644X_EMAC_BASE		(0x01C80000)
+#define DM644X_EMAC_MDIO_BASE		(DM644X_EMAC_BASE + 0x4000)
 #define DM644X_EMAC_CNTRL_OFFSET	(0x0000)
 #define DM644X_EMAC_CNTRL_MOD_OFFSET	(0x1000)
 #define DM644X_EMAC_CNTRL_RAM_OFFSET	(0x2000)
-#define DM644X_EMAC_MDIO_OFFSET		(0x4000)
 #define DM644X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
 #define DM644X_ASYNC_EMIF_CONTROL_BASE	0x01E00000
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index add6f794a362..7a27f3f13913 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -19,10 +19,10 @@
 #include <linux/davinci_emac.h>
 
 #define DM646X_EMAC_BASE		(0x01C80000)
+#define DM646X_EMAC_MDIO_BASE		(DM646X_EMAC_BASE + 0x4000)
 #define DM646X_EMAC_CNTRL_OFFSET	(0x0000)
 #define DM646X_EMAC_CNTRL_MOD_OFFSET	(0x1000)
 #define DM646X_EMAC_CNTRL_RAM_OFFSET	(0x2000)
-#define DM646X_EMAC_MDIO_OFFSET		(0x4000)
 #define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
 #define DM646X_ASYNC_EMIF_CONTROL_BASE	0x20008000
@@ -32,6 +32,7 @@ void __init dm646x_init(void);
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
 void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
 void __init dm646x_board_setup_refclk(struct clk *clk);
+int __init dm646x_init_edma(struct edma_rsv_info *rsv);
 
 void dm646x_video_init(void);
 
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index ced3092af5ba..dc10ef6cf572 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -230,6 +230,8 @@ enum sync_dimension {
 #define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
 #define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
 
+#define EDMA_MAX_CC               2
+
 /* alloc/free DMA channels and their dedicated parameter RAM slots */
 int edma_alloc_channel(int channel,
 	void (*callback)(unsigned channel, u16 ch_status, void *data),
@@ -269,6 +271,12 @@ void edma_clear_event(unsigned channel);
 void edma_pause(unsigned channel);
 void edma_resume(unsigned channel);
 
+struct edma_rsv_info {
+
+	const s16	(*rsv_chans)[2];
+	const s16	(*rsv_slots)[2];
+};
+
 /* platform_data for EDMA driver */
 struct edma_soc_info {
 
@@ -280,6 +288,9 @@ struct edma_soc_info {
 	unsigned	n_cc;
 	enum dma_event_q	default_queue;
 
+	/* Resource reservation for other cores */
+	struct edma_rsv_info	*rsv;
+
 	const s8	(*queue_tc_mapping)[2];
 	const s8	(*queue_priority_mapping)[2];
 };
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index 504cc180a60b..fbece126c2bf 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -25,6 +25,7 @@
 
 enum davinci_gpio_type {
 	GPIO_TYPE_DAVINCI = 0,
+	GPIO_TYPE_TNETV107X,
 };
 
 /*
@@ -87,9 +88,13 @@ static inline u32 __gpio_mask(unsigned gpio)
 	return 1 << (gpio % 32);
 }
 
-/* The get/set/clear functions will inline when called with constant
+/*
+ * The get/set/clear functions will inline when called with constant
  * parameters referencing built-in GPIOs, for low-overhead bitbanging.
  *
+ * gpio_set_value() will inline only on traditional Davinci style controllers
+ * with distinct set/clear registers.
+ *
  * Otherwise, calls with variable parameters or referencing external
  * GPIOs (e.g. on GPIO expander chips) use outlined functions.
  */
@@ -100,12 +105,15 @@ static inline void gpio_set_value(unsigned gpio, int value)
 		u32				mask;
 
 		ctlr = __gpio_to_controller(gpio);
-		mask = __gpio_mask(gpio);
-		if (value)
-			__raw_writel(mask, ctlr->set_data);
-		else
-			__raw_writel(mask, ctlr->clr_data);
-		return;
+
+		if (ctlr->set_data != ctlr->clr_data) {
+			mask = __gpio_mask(gpio);
+			if (value)
+				__raw_writel(mask, ctlr->set_data);
+			else
+				__raw_writel(mask, ctlr->clr_data);
+			return;
+		}
 	}
 
 	__gpio_set_value(gpio, value);
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
index a91edfb8beea..22eb97c1c30b 100644
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -48,19 +48,16 @@
  * below 128M
  */
 static inline void
-__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+__arch_adjust_zones(unsigned long *size, unsigned long *holes)
 {
 	unsigned int sz = (128<<20) >> PAGE_SHIFT;
 
-	if (node != 0)
-		sz = 0;
-
 	size[1] = size[0] - sz;
 	size[0] = sz;
 }
 
-#define arch_adjust_zones(node, zone_size, holes) \
-        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
+#define arch_adjust_zones(zone_size, holes) \
+        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + (128<<20) - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + (128<<20))
diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h
index b2ad8090bd10..025151049f05 100644
--- a/arch/arm/mach-davinci/include/mach/nand.h
+++ b/arch/arm/mach-davinci/include/mach/nand.h
@@ -30,9 +30,6 @@
 
 #include <linux/mtd/nand.h>
 
-#define NRCSR_OFFSET		0x00
-#define AWCCR_OFFSET		0x04
-#define A1CR_OFFSET		0x10
 #define NANDFCR_OFFSET		0x60
 #define NANDFSR_OFFSET		0x64
 #define NANDF1ECC_OFFSET	0x70
@@ -83,6 +80,9 @@ struct davinci_nand_pdata {		/* platform_data */
 	/* Main and mirror bbt descriptor overrides */
 	struct nand_bbt_descr	*bbt_td;
 	struct nand_bbt_descr	*bbt_md;
+
+	/* Access timings */
+	struct davinci_aemif_timing	*timing;
 };
 
 #endif	/* __ARCH_ARM_DAVINCI_NAND_H */
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 983da6e4554c..62b0858f68ca 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -172,6 +172,7 @@
 #define DA8XX_LPSC1_UART2		13
 #define DA8XX_LPSC1_LCDC		16
 #define DA8XX_LPSC1_PWM			17
+#define DA850_LPSC1_MMC_SD1		18
 #define DA8XX_LPSC1_ECAP		20
 #define DA830_LPSC1_EQEP		21
 #define DA850_LPSC1_TPTC2		21
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index f6c4f34909a2..8051110b8ac3 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -11,8 +11,19 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
+#include <asm/memory.h>
+
 #include <mach/hardware.h>
 
+/*
+ * Stolen area that contains debug uart physical and virtual addresses.  These
+ * addresses are filled in by the uncompress.h code, and are used by the debug
+ * macros in debug-macro.S.
+ *
+ * This area sits just below the page tables (see arch/arm/kernel/head.S).
+ */
+#define DAVINCI_UART_INFO	(PHYS_OFFSET + 0x3ff8)
+
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
@@ -21,16 +32,26 @@
 #define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
 #define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
 
+#define TNETV107X_UART0_BASE	0x08108100
+#define TNETV107X_UART1_BASE	0x08088400
+#define TNETV107X_UART2_BASE	0x08108300
+
+#define TNETV107X_UART0_VIRT	IOMEM(0xfee08100)
+#define TNETV107X_UART1_VIRT	IOMEM(0xfed88400)
+#define TNETV107X_UART2_VIRT	IOMEM(0xfee08300)
+
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10
 #define UART_DM646X_SCR_TX_WATERMARK	0x08
 
+#ifndef __ASSEMBLY__
 struct davinci_uart_config {
 	/* Bit field of UARTs present; bit 0 --> UART1 */
 	unsigned int enabled_uarts;
 };
 
 extern int davinci_serial_init(struct davinci_uart_config *);
+#endif
 
 #endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
new file mode 100644
index 000000000000..5a681d880dcb
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -0,0 +1,58 @@
+/*
+ * Texas Instruments TNETV107X SoC Specific Defines
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_DAVINCI_TNETV107X_H
+#define __ASM_ARCH_DAVINCI_TNETV107X_H
+
+#include <asm/sizes.h>
+
+#define TNETV107X_DDR_BASE	0x80000000
+
+/*
+ * Fixed mapping for early init starts here. If low-level debug is enabled,
+ * this area also gets mapped via io_pg_offset and io_phys by the boot code.
+ * To fit in with the io_pg_offset calculation, the io base address selected
+ * here _must_ be a multiple of 2^20.
+ */
+#define TNETV107X_IO_BASE	0x08000000
+#define TNETV107X_IO_VIRT	(IO_VIRT + SZ_1M)
+
+#define TNETV107X_N_GPIO	65
+
+#ifndef __ASSEMBLY__
+
+#include <linux/serial_8250.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <mach/mmc.h>
+#include <mach/nand.h>
+#include <mach/serial.h>
+
+struct tnetv107x_device_info {
+	struct davinci_uart_config	*serial_config;
+	struct davinci_mmc_config	*mmc_config[2];  /* 2 controllers */
+	struct davinci_nand_pdata	*nand_config[4]; /* 4 chipsels */
+	struct matrix_keypad_platform_data *keypad_config;
+};
+
+extern struct platform_device tnetv107x_wdt_device;
+extern struct platform_device tnetv107x_serial_device;
+
+extern void __init tnetv107x_init(void);
+extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *);
+extern void __init tnetv107x_irq_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_DAVINCI_TNETV107X_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 33796b4db17f..47723e8d75a4 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -1,8 +1,17 @@
 /*
  * Serial port stubs for kernel decompress status messages
  *
- *  Author:     Anant Gole
- * (C) Copyright (C) 2006, Texas Instruments, Inc
+ * Initially based on:
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Original copyrights follow.
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
@@ -11,30 +20,17 @@
 
 #include <linux/types.h>
 #include <linux/serial_reg.h>
-#include <mach/serial.h>
 
 #include <asm/mach-types.h>
 
-extern unsigned int __machine_arch_type;
+#include <mach/serial.h>
 
 static u32 *uart;
-
-static u32 *get_uart_base(void)
-{
-	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM ||
-		__machine_arch_type == MACH_TYPE_DAVINCI_DA850_EVM)
-		return (u32 *)DA8XX_UART2_BASE;
-	else
-		return (u32 *)DAVINCI_UART0_BASE;
-}
+static u32 *uart_info = (u32 *)(DAVINCI_UART_INFO);
 
 /* PORT_16C550A, in polled non-fifo mode */
-
 static void putc(char c)
 {
-	if (!uart)
-		uart = get_uart_base();
-
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
 	uart[UART_TX] = c;
@@ -42,12 +38,63 @@ static void putc(char c)
 
 static inline void flush(void)
 {
-	if (!uart)
-		uart = get_uart_base();
-
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
 }
 
-#define arch_decomp_setup()
+static inline void set_uart_info(u32 phys, void * __iomem virt)
+{
+	uart = (u32 *)phys;
+	uart_info[0] = phys;
+	uart_info[1] = (u32)virt;
+}
+
+#define _DEBUG_LL_ENTRY(machine, phys, virt)			\
+	if (machine_is_##machine()) {				\
+		set_uart_info(phys, virt);			\
+		break;						\
+	}
+
+#define DEBUG_LL_DAVINCI(machine, port)				\
+	_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE,	\
+			IO_ADDRESS(DAVINCI_UART##port##_BASE))
+
+#define DEBUG_LL_DA8XX(machine, port)				\
+	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE,	\
+			IO_ADDRESS(DA8XX_UART##port##_BASE))
+
+#define DEBUG_LL_TNETV107X(machine, port)			\
+	_DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE,	\
+			TNETV107X_UART##port##_VIRT)
+
+static inline void __arch_decomp_setup(unsigned long arch_id)
+{
+	/*
+	 * Initialize the port based on the machine ID from the bootloader.
+	 * Note that we're using macros here instead of switch statement
+	 * as machine_is functions are optimized out for the boards that
+	 * are not selected.
+	 */
+	do {
+		/* Davinci boards */
+		DEBUG_LL_DAVINCI(davinci_evm,		0);
+		DEBUG_LL_DAVINCI(sffsdr,		0);
+		DEBUG_LL_DAVINCI(neuros_osd2,		0);
+		DEBUG_LL_DAVINCI(davinci_dm355_evm,	0);
+		DEBUG_LL_DAVINCI(dm355_leopard,		0);
+		DEBUG_LL_DAVINCI(davinci_dm6467_evm,	0);
+		DEBUG_LL_DAVINCI(davinci_dm365_evm,	0);
+
+		/* DA8xx boards */
+		DEBUG_LL_DA8XX(davinci_da830_evm,	2);
+		DEBUG_LL_DA8XX(davinci_da850_evm,	2);
+		DEBUG_LL_DA8XX(mityomapl138,		1);
+		DEBUG_LL_DA8XX(omapl138_hawkboard,	2);
+
+		/* TNETV107x boards */
+		DEBUG_LL_TNETV107X(tnetv107x,		1);
+	} while (0);
+}
+
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
 #define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
new file mode 100644
index 000000000000..daeae06430b9
--- /dev/null
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -0,0 +1,760 @@
+/*
+ * Texas Instruments TNETV107X SoC Support
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/cputype.h>
+#include <mach/psc.h>
+#include <mach/cp_intc.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/hardware.h>
+#include <mach/tnetv107x.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/* Base addresses for on-chip devices */
+#define TNETV107X_INTC_BASE			0x03000000
+#define TNETV107X_TIMER0_BASE			0x08086500
+#define TNETV107X_TIMER1_BASE			0x08086600
+#define TNETV107X_CHIP_CFG_BASE			0x08087000
+#define TNETV107X_GPIO_BASE			0x08088000
+#define TNETV107X_CLOCK_CONTROL_BASE		0x0808a000
+#define TNETV107X_PSC_BASE			0x0808b000
+
+/* Reference clock frequencies */
+#define OSC_FREQ_ONCHIP		(24000 * 1000)
+#define OSC_FREQ_OFFCHIP_SYS	(25000 * 1000)
+#define OSC_FREQ_OFFCHIP_ETH	(25000 * 1000)
+#define OSC_FREQ_OFFCHIP_TDM	(19200 * 1000)
+
+#define N_PLLS	3
+
+/* Clock Control Registers */
+struct clk_ctrl_regs {
+	u32	pll_bypass;
+	u32	_reserved0;
+	u32	gem_lrst;
+	u32	_reserved1;
+	u32	pll_unlock_stat;
+	u32	sys_unlock;
+	u32	eth_unlock;
+	u32	tdm_unlock;
+};
+
+/* SSPLL Registers */
+struct sspll_regs {
+	u32	modes;
+	u32	post_div;
+	u32	pre_div;
+	u32	mult_factor;
+	u32	divider_range;
+	u32	bw_divider;
+	u32	spr_amount;
+	u32	spr_rate_div;
+	u32	diag;
+};
+
+/* Watchdog Timer Registers */
+struct wdt_regs {
+	u32	kick_lock;
+	u32	kick;
+	u32	change_lock;
+	u32	change ;
+	u32	disable_lock;
+	u32	disable;
+	u32	prescale_lock;
+	u32	prescale;
+};
+
+static struct clk_ctrl_regs __iomem *clk_ctrl_regs;
+
+static struct sspll_regs __iomem *sspll_regs[N_PLLS];
+static int sspll_regs_base[N_PLLS] = { 0x40, 0x80, 0xc0 };
+
+/* PLL bypass bit shifts in clk_ctrl_regs->pll_bypass register */
+static u32 bypass_mask[N_PLLS] = { BIT(0), BIT(2), BIT(1) };
+
+/* offchip (external) reference clock frequencies */
+static u32 pll_ext_freq[] = {
+	OSC_FREQ_OFFCHIP_SYS,
+	OSC_FREQ_OFFCHIP_TDM,
+	OSC_FREQ_OFFCHIP_ETH
+};
+
+/* PSC control registers */
+static u32 psc_regs[] = { TNETV107X_PSC_BASE };
+
+/* Host map for interrupt controller */
+static u32 intc_host_map[] = { 0x01010000, 0x01010101, -1 };
+
+static unsigned long clk_sspll_recalc(struct clk *clk);
+
+/* Level 1 - the PLLs */
+#define define_pll_clk(cname, pll, divmask, base)	\
+	static struct pll_data pll_##cname##_data = {	\
+		.num		= pll,			\
+		.div_ratio_mask	= divmask,		\
+		.phys_base	= base +		\
+			TNETV107X_CLOCK_CONTROL_BASE,	\
+	};						\
+	static struct clk pll_##cname##_clk = {		\
+		.name		= "pll_" #cname "_clk",	\
+		.pll_data	= &pll_##cname##_data,	\
+		.flags		= CLK_PLL,		\
+		.recalc		= clk_sspll_recalc,	\
+	}
+
+define_pll_clk(sys, 0, 0x1ff, 0x600);
+define_pll_clk(tdm, 1, 0x0ff, 0x200);
+define_pll_clk(eth, 2, 0x0ff, 0x400);
+
+/* Level 2 - divided outputs from the PLLs */
+#define define_pll_div_clk(pll, cname, div)		\
+	static struct clk pll##_##cname##_clk = {	\
+		.name		= #pll "_" #cname "_clk",\
+		.parent		= &pll_##pll##_clk,	\
+		.flags		= CLK_PLL,		\
+		.div_reg	= PLLDIV##div,		\
+	}
+
+define_pll_div_clk(sys, arm1176,	1);
+define_pll_div_clk(sys, dsp,		2);
+define_pll_div_clk(sys, ddr,		3);
+define_pll_div_clk(sys, full,		4);
+define_pll_div_clk(sys, lcd,		5);
+define_pll_div_clk(sys, vlynq_ref,	6);
+define_pll_div_clk(sys, tsc,		7);
+define_pll_div_clk(sys, half,		8);
+
+define_pll_div_clk(eth, 5mhz,		1);
+define_pll_div_clk(eth, 50mhz,		2);
+define_pll_div_clk(eth, 125mhz,		3);
+define_pll_div_clk(eth, 250mhz,		4);
+define_pll_div_clk(eth, 25mhz,		5);
+
+define_pll_div_clk(tdm, 0,		1);
+define_pll_div_clk(tdm, extra,		2);
+define_pll_div_clk(tdm, 1,		3);
+
+
+/* Level 3 - LPSC gated clocks */
+#define __lpsc_clk(cname, _parent, mod, flg)		\
+	static struct clk clk_##cname = {		\
+		.name		= #cname,		\
+		.parent		= &_parent,		\
+		.lpsc		= TNETV107X_LPSC_##mod,\
+		.flags		= flg,			\
+	}
+
+#define lpsc_clk_enabled(cname, parent, mod)		\
+	__lpsc_clk(cname, parent, mod, ALWAYS_ENABLED)
+
+#define lpsc_clk(cname, parent, mod)			\
+	__lpsc_clk(cname, parent, mod, 0)
+
+lpsc_clk_enabled(arm,		sys_arm1176_clk, ARM);
+lpsc_clk_enabled(gem,		sys_dsp_clk,	GEM);
+lpsc_clk_enabled(ddr2_phy,	sys_ddr_clk,	DDR2_PHY);
+lpsc_clk_enabled(tpcc,		sys_full_clk,	TPCC);
+lpsc_clk_enabled(tptc0,		sys_full_clk,	TPTC0);
+lpsc_clk_enabled(tptc1,		sys_full_clk,	TPTC1);
+lpsc_clk_enabled(ram,		sys_full_clk,	RAM);
+lpsc_clk_enabled(aemif,		sys_full_clk,	AEMIF);
+lpsc_clk_enabled(chipcfg,	sys_half_clk,	CHIP_CFG);
+lpsc_clk_enabled(rom,		sys_half_clk,	ROM);
+lpsc_clk_enabled(secctl,	sys_half_clk,	SECCTL);
+lpsc_clk_enabled(keymgr,	sys_half_clk,	KEYMGR);
+lpsc_clk_enabled(gpio,		sys_half_clk,	GPIO);
+lpsc_clk_enabled(debugss,	sys_half_clk,	DEBUGSS);
+lpsc_clk_enabled(system,	sys_half_clk,	SYSTEM);
+lpsc_clk_enabled(ddr2_vrst,	sys_ddr_clk,	DDR2_EMIF1_VRST);
+lpsc_clk_enabled(ddr2_vctl_rst,	sys_ddr_clk,	DDR2_EMIF2_VCTL_RST);
+lpsc_clk_enabled(wdt_arm,	sys_half_clk,	WDT_ARM);
+
+lpsc_clk(mbx_lite,	sys_arm1176_clk,	MBX_LITE);
+lpsc_clk(ethss,		eth_125mhz_clk,		ETHSS);
+lpsc_clk(tsc,		sys_tsc_clk,		TSC);
+lpsc_clk(uart0,		sys_half_clk,		UART0);
+lpsc_clk(uart1,		sys_half_clk,		UART1);
+lpsc_clk(uart2,		sys_half_clk,		UART2);
+lpsc_clk(pktsec,	sys_half_clk,		PKTSEC);
+lpsc_clk(keypad,	sys_half_clk,		KEYPAD);
+lpsc_clk(mdio,		sys_half_clk,		MDIO);
+lpsc_clk(sdio0,		sys_half_clk,		SDIO0);
+lpsc_clk(sdio1,		sys_half_clk,		SDIO1);
+lpsc_clk(timer0,	sys_half_clk,		TIMER0);
+lpsc_clk(timer1,	sys_half_clk,		TIMER1);
+lpsc_clk(wdt_dsp,	sys_half_clk,		WDT_DSP);
+lpsc_clk(ssp,		sys_half_clk,		SSP);
+lpsc_clk(tdm0,		tdm_0_clk,		TDM0);
+lpsc_clk(tdm1,		tdm_1_clk,		TDM1);
+lpsc_clk(vlynq,		sys_vlynq_ref_clk,	VLYNQ);
+lpsc_clk(mcdma,		sys_half_clk,		MCDMA);
+lpsc_clk(usb0,		sys_half_clk,		USB0);
+lpsc_clk(usb1,		sys_half_clk,		USB1);
+lpsc_clk(usbss,		sys_half_clk,		USBSS);
+lpsc_clk(ethss_rgmii,	eth_250mhz_clk,		ETHSS_RGMII);
+lpsc_clk(imcop,		sys_dsp_clk,		IMCOP);
+lpsc_clk(spare,		sys_half_clk,		SPARE);
+
+/* LCD needs a full power down to clear controller state */
+__lpsc_clk(lcd, sys_lcd_clk, LCD, PSC_SWRSTDISABLE);
+
+
+/* Level 4 - leaf clocks for LPSC modules shared across drivers */
+static struct clk clk_rng = { .name = "rng", .parent = &clk_pktsec };
+static struct clk clk_pka = { .name = "pka", .parent = &clk_pktsec };
+
+static struct clk_lookup clks[] = {
+	CLK(NULL,		"pll_sys_clk",		&pll_sys_clk),
+	CLK(NULL,		"pll_eth_clk",		&pll_eth_clk),
+	CLK(NULL,		"pll_tdm_clk",		&pll_tdm_clk),
+	CLK(NULL,		"sys_arm1176_clk",	&sys_arm1176_clk),
+	CLK(NULL,		"sys_dsp_clk",		&sys_dsp_clk),
+	CLK(NULL,		"sys_ddr_clk",		&sys_ddr_clk),
+	CLK(NULL,		"sys_full_clk",		&sys_full_clk),
+	CLK(NULL,		"sys_lcd_clk",		&sys_lcd_clk),
+	CLK(NULL,		"sys_vlynq_ref_clk",	&sys_vlynq_ref_clk),
+	CLK(NULL,		"sys_tsc_clk",		&sys_tsc_clk),
+	CLK(NULL,		"sys_half_clk",		&sys_half_clk),
+	CLK(NULL,		"eth_5mhz_clk",		&eth_5mhz_clk),
+	CLK(NULL,		"eth_50mhz_clk",	&eth_50mhz_clk),
+	CLK(NULL,		"eth_125mhz_clk",	&eth_125mhz_clk),
+	CLK(NULL,		"eth_250mhz_clk",	&eth_250mhz_clk),
+	CLK(NULL,		"eth_25mhz_clk",	&eth_25mhz_clk),
+	CLK(NULL,		"tdm_0_clk",		&tdm_0_clk),
+	CLK(NULL,		"tdm_extra_clk",	&tdm_extra_clk),
+	CLK(NULL,		"tdm_1_clk",		&tdm_1_clk),
+	CLK(NULL,		"clk_arm",		&clk_arm),
+	CLK(NULL,		"clk_gem",		&clk_gem),
+	CLK(NULL,		"clk_ddr2_phy",		&clk_ddr2_phy),
+	CLK(NULL,		"clk_tpcc",		&clk_tpcc),
+	CLK(NULL,		"clk_tptc0",		&clk_tptc0),
+	CLK(NULL,		"clk_tptc1",		&clk_tptc1),
+	CLK(NULL,		"clk_ram",		&clk_ram),
+	CLK(NULL,		"clk_mbx_lite",		&clk_mbx_lite),
+	CLK("tnetv107x-fb.0",	NULL,			&clk_lcd),
+	CLK(NULL,		"clk_ethss",		&clk_ethss),
+	CLK(NULL,		"aemif",		&clk_aemif),
+	CLK(NULL,		"clk_chipcfg",		&clk_chipcfg),
+	CLK("tnetv107x-ts.0",	NULL,			&clk_tsc),
+	CLK(NULL,		"clk_rom",		&clk_rom),
+	CLK(NULL,		"uart2",		&clk_uart2),
+	CLK(NULL,		"clk_pktsec",		&clk_pktsec),
+	CLK("tnetv107x-rng.0",	NULL,			&clk_rng),
+	CLK("tnetv107x-pka.0",	NULL,			&clk_pka),
+	CLK(NULL,		"clk_secctl",		&clk_secctl),
+	CLK(NULL,		"clk_keymgr",		&clk_keymgr),
+	CLK("tnetv107x-keypad.0", NULL,			&clk_keypad),
+	CLK(NULL,		"clk_gpio",		&clk_gpio),
+	CLK(NULL,		"clk_mdio",		&clk_mdio),
+	CLK("davinci_mmc.0",	NULL,			&clk_sdio0),
+	CLK(NULL,		"uart0",		&clk_uart0),
+	CLK(NULL,		"uart1",		&clk_uart1),
+	CLK(NULL,		"timer0",		&clk_timer0),
+	CLK(NULL,		"timer1",		&clk_timer1),
+	CLK("tnetv107x_wdt.0",	NULL,			&clk_wdt_arm),
+	CLK(NULL,		"clk_wdt_dsp",		&clk_wdt_dsp),
+	CLK("ti-ssp.0",		NULL,			&clk_ssp),
+	CLK(NULL,		"clk_tdm0",		&clk_tdm0),
+	CLK(NULL,		"clk_vlynq",		&clk_vlynq),
+	CLK(NULL,		"clk_mcdma",		&clk_mcdma),
+	CLK(NULL,		"clk_usb0",		&clk_usb0),
+	CLK(NULL,		"clk_tdm1",		&clk_tdm1),
+	CLK(NULL,		"clk_debugss",		&clk_debugss),
+	CLK(NULL,		"clk_ethss_rgmii",	&clk_ethss_rgmii),
+	CLK(NULL,		"clk_system",		&clk_system),
+	CLK(NULL,		"clk_imcop",		&clk_imcop),
+	CLK(NULL,		"clk_spare",		&clk_spare),
+	CLK("davinci_mmc.1",	NULL,			&clk_sdio1),
+	CLK(NULL,		"clk_usb1",		&clk_usb1),
+	CLK(NULL,		"clk_usbss",		&clk_usbss),
+	CLK(NULL,		"clk_ddr2_vrst",	&clk_ddr2_vrst),
+	CLK(NULL,		"clk_ddr2_vctl_rst",	&clk_ddr2_vctl_rst),
+	CLK(NULL,		NULL,			NULL),
+};
+
+static const struct mux_config pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+	MUX_CFG(TNETV107X, ASR_A00,		0, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO32,		0, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A01,		0, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO33,		0, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A02,		0, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO34,		0, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A03,		0, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO35,		0, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A04,		0, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO36,		0, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A05,		0, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO37,		0, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A06,		1, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO38,		1, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A07,		1, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO39,		1, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A08,		1, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO40,		1, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A09,		1, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO41,		1, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A10,		1, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO42,		1, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A11,		1, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, BOOT_STRP_0,		1, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A12,		2, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, BOOT_STRP_1,		2, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A13,		2, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO43,		2, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A14,		2, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO44,		2, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A15,		2, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO45,		2, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A16,		2, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO46,		2, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A17,		2, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO47,		2, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A18,		3, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO48,		3, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA3_0,	3, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_A19,		3, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO49,		3, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA2_0,	3, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_A20,		3, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO50,		3, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA1_0,	3, 10, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_A21,		3, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO51,		3, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA0_0,	3, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_A22,		3, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO52,		3, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_CMD_0,		3, 20, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_A23,		3, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO53,		3, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_CLK_0,		3, 25, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_BA_1,		4, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO54,		4, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SYS_PLL_CLK,		4, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_CS0,		4, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, ASR_CS1,		4, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, ASR_CS2,		4, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM_PLL_CLK,		4, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_CS3,		4, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, ETH_PHY_CLK,		4, 20, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, ASR_D00,		4, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO55,		4, 25, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D01,		5, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO56,		5, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D02,		5, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO57,		5, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D03,		5, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO58,		5, 10, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D04,		5, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO59_0,		5, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D05,		5, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO60_0,		5, 20, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D06,		5, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO61_0,		5, 25, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D07,		6, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO62_0,		6, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D08,		6, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO63_0,		6, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D09,		6, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO64_0,		6, 10, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D10,		6, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA3_1,	6, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D11,		6, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA2_1,	6, 20, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D12,		6, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA1_1,	6, 25, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D13,		7, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA0_1,	7, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D14,		7, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_CMD_1,		7, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D15,		7, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_CLK_1,		7, 10, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_OE,		7, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, BOOT_STRP_2,		7, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_RNW,		7, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO29_0,		7, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_WAIT,		7, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO30_0,		7, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_WE,		8, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, BOOT_STRP_3,		8, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_WE_DQM0,		8, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO31,		8, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD17_0,		8, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_WE_DQM1,		8, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, ASR_BA0_0,		8, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, VLYNQ_CLK,		9, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO14,		9, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD19_0,		9, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, VLYNQ_RXD0,		9, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO15,		9, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD20_0,		9, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, VLYNQ_RXD1,		9, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO16,		9, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD21_0,		9, 10, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, VLYNQ_TXD0,		9, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO17,		9, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD22_0,		9, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, VLYNQ_TXD1,		9, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO18,		9, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD23_0,		9, 20, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, SDIO0_CLK,		10, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO19,		10, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO0_CMD,		10, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO20,		10, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO0_DATA0,		10, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO21,		10, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO0_DATA1,		10, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO22,		10, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO0_DATA2,		10, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO23,		10, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO0_DATA3,		10, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO24,		10, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, EMU0,		11, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, EMU1,		11, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, RTCK,		12, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TRST_N,		12, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TCK,			12, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDI,			12, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDO,			12, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TMS,			12, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM1_CLK,		13, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM1_RX,		13, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM1_TX,		13, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM1_FS,		13, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R0,		14, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R1,		14, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R2,		14, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R3,		14, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R4,		14, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R5,		14, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R6,		15, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO12,		15, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, KEYPAD_R7,		15, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO10,		15, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, KEYPAD_C0,		15, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C1,		15, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C2,		15, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C3,		15, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C4,		16, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C5,		16, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C6,		16, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO13,		16, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, TEST_CLK_IN,		16, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, KEYPAD_C7,		16, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO11,		16, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SSP0_0,		17, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SCC_DCLK,		17, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD20_1,		17, 0, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP0_1,		17, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SCC_CS_N,		17, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD21_1,		17, 5, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP0_2,		17, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SCC_D,		17, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD22_1,		17, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP0_3,		17, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SCC_RESETN,		17, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD23_1,		17, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP1_0,		18, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO25,		18, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, UART2_CTS,		18, 0, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP1_1,		18, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO26,		18, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, UART2_RD,		18, 5, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP1_2,		18, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO27,		18, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, UART2_RTS,		18, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP1_3,		18, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO28,		18, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, UART2_TD,		18, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, UART0_CTS,		19, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, UART0_RD,		19, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, UART0_RTS,		19, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, UART0_TD,		19, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, UART1_RD,		19, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, UART1_TD,		19, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_AC_NCS,		20, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_HSYNC_RNW,	20, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_VSYNC_A0,	20, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_MCLK,		20, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD16_0,		20, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PCLK_E,		20, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD00,		20, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD01,		21, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD02,		21, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD03,		21, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD04,		21, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD05,		21, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD06,		21, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD07,		22, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD08,		22, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO59_1,		22, 5, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD09,		22, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO60_1,		22, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD10,		22, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, ASR_BA0_1,		22, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, GPIO61_1,		22, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD11,		22, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO62_1,		22, 20, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD12,		22, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO63_1,		22, 25, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD13,		23, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO64_1,		23, 0, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD14,		23, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO29_1,		23, 5, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD15,		23, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO30_1,		23, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, EINT0,		24, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO08,		24, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, EINT1,		24, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO09,		24, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, GPIO00,		24, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD20_2,		24, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, TDM_CLK_IN_2,	24, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, GPIO01,		24, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD21_2,		24, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, 24M_CLK_OUT_1,	24, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, GPIO02,		24, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD22_2,		24, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, GPIO03,		24, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD23_2,		24, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, GPIO04,		25, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD16_1,		25, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, USB0_RXERR,		25, 0, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, GPIO05,		25, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD17_1,		25, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, TDM_CLK_IN_1,	25, 5, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, GPIO06,		25, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD18,		25, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, 24M_CLK_OUT_2,	25, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, GPIO07,		25, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD19_1,		25, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, USB1_RXERR,		25, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, ETH_PLL_CLK,		25, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, MDIO,		26, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, MDC,			26, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, AIC_MUTE_STAT_N,	26, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM0_CLK,		26, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, AIC_HNS_EN_N,	26, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM0_FS,		26, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, AIC_HDS_EN_STAT_N,	26, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM0_TX,		26, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, AIC_HNF_EN_STAT_N,	26, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM0_RX,		26, 25, 0x1f, 0x04, false)
+#endif
+};
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 irq_prios[TNETV107X_N_CP_INTC_IRQ] = {
+	/* fill in default priority 7 */
+	[0 ... (TNETV107X_N_CP_INTC_IRQ - 1)]	= 7,
+	/* now override as needed, e.g. [xxx] = 5 */
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb8a1,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_TNETV107X,
+		.name		= "tnetv107x rev 1.0",
+	},
+	{
+		.variant	= 0x1,
+		.part_no	= 0xb8a1,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_TNETV107X,
+		.name		= "tnetv107x rev 1.1/1.2",
+	},
+};
+
+static struct davinci_timer_instance timer_instance[2] = {
+	{
+		.base		= TNETV107X_TIMER0_BASE,
+		.bottom_irq	= IRQ_TNETV107X_TIMER_0_TINT12,
+		.top_irq	= IRQ_TNETV107X_TIMER_0_TINT34,
+	},
+	{
+		.base		= TNETV107X_TIMER1_BASE,
+		.bottom_irq	= IRQ_TNETV107X_TIMER_1_TINT12,
+		.top_irq	= IRQ_TNETV107X_TIMER_1_TINT34,
+	},
+};
+
+static struct davinci_timer_info timer_info = {
+	.timers		= timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+/*
+ * TNETV107X platforms do not use the static mappings from Davinci
+ * IO_PHYS/IO_VIRT. This SOC's interesting MMRs are at different addresses,
+ * and changing IO_PHYS would break away from existing Davinci SOCs.
+ *
+ * The primary impact of the current model is that IO_ADDRESS() is not to be
+ * used to map registers on TNETV107X.
+ *
+ * 1.	The first chunk is for INTC:  This needs to be mapped in via iotable
+ *	because ioremap() does not seem to be operational at the time when
+ *	irqs are initialized.  Without this, consistent dma init bombs.
+ *
+ * 2.	The second chunk maps in register areas that need to be populated into
+ *	davinci_soc_info.  Note that alignment restrictions come into play if
+ *	low-level debug is enabled (see note in <mach/tnetv107x.h>).
+ */
+static struct map_desc io_desc[] = {
+	{	/* INTC */
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(TNETV107X_INTC_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	},
+	{	/* Most of the rest */
+		.virtual	= TNETV107X_IO_VIRT,
+		.pfn		= __phys_to_pfn(TNETV107X_IO_BASE),
+		.length		= IO_SIZE - SZ_1M,
+		.type		= MT_DEVICE
+	},
+};
+
+static unsigned long clk_sspll_recalc(struct clk *clk)
+{
+	int		pll;
+	unsigned long	mult = 0, prediv = 1, postdiv = 1;
+	unsigned long	ref = OSC_FREQ_ONCHIP, ret;
+	u32		tmp;
+
+	if (WARN_ON(!clk->pll_data))
+		return clk->rate;
+
+	if (!clk_ctrl_regs) {
+		void __iomem *tmp;
+
+		tmp = ioremap(TNETV107X_CLOCK_CONTROL_BASE, SZ_4K);
+
+		if (WARN(!tmp, "failed ioremap for clock control regs\n"))
+			return clk->parent ? clk->parent->rate : 0;
+
+		for (pll = 0; pll < N_PLLS; pll++)
+			sspll_regs[pll] = tmp + sspll_regs_base[pll];
+
+		clk_ctrl_regs = tmp;
+	}
+
+	pll = clk->pll_data->num;
+
+	tmp = __raw_readl(&clk_ctrl_regs->pll_bypass);
+	if (!(tmp & bypass_mask[pll])) {
+		mult	= __raw_readl(&sspll_regs[pll]->mult_factor);
+		prediv	= __raw_readl(&sspll_regs[pll]->pre_div) + 1;
+		postdiv	= __raw_readl(&sspll_regs[pll]->post_div) + 1;
+	}
+
+	tmp = __raw_readl(clk->pll_data->base + PLLCTL);
+	if (tmp & PLLCTL_CLKMODE)
+		ref = pll_ext_freq[pll];
+
+	clk->pll_data->input_rate = ref;
+
+	tmp = __raw_readl(clk->pll_data->base + PLLCTL);
+	if (!(tmp & PLLCTL_PLLEN))
+		return ref;
+
+	ret = ref;
+	if (mult)
+		ret += ((unsigned long long)ref * mult) / 256;
+
+	ret /= (prediv * postdiv);
+
+	return ret;
+}
+
+static void tnetv107x_watchdog_reset(struct platform_device *pdev)
+{
+	struct wdt_regs __iomem *regs;
+
+	regs = ioremap(pdev->resource[0].start, SZ_4K);
+
+	/* disable watchdog */
+	__raw_writel(0x7777, &regs->disable_lock);
+	__raw_writel(0xcccc, &regs->disable_lock);
+	__raw_writel(0xdddd, &regs->disable_lock);
+	__raw_writel(0, &regs->disable);
+
+	/* program prescale */
+	__raw_writel(0x5a5a, &regs->prescale_lock);
+	__raw_writel(0xa5a5, &regs->prescale_lock);
+	__raw_writel(0, &regs->prescale);
+
+	/* program countdown */
+	__raw_writel(0x6666, &regs->change_lock);
+	__raw_writel(0xbbbb, &regs->change_lock);
+	__raw_writel(1, &regs->change);
+
+	/* enable watchdog */
+	__raw_writel(0x7777, &regs->disable_lock);
+	__raw_writel(0xcccc, &regs->disable_lock);
+	__raw_writel(0xdddd, &regs->disable_lock);
+	__raw_writel(1, &regs->disable);
+
+	/* kick */
+	__raw_writel(0x5555, &regs->kick_lock);
+	__raw_writel(0xaaaa, &regs->kick_lock);
+	__raw_writel(1, &regs->kick);
+}
+
+static struct davinci_soc_info tnetv107x_soc_info = {
+	.io_desc		= io_desc,
+	.io_desc_num		= ARRAY_SIZE(io_desc),
+	.ids			= ids,
+	.ids_num		= ARRAY_SIZE(ids),
+	.jtag_id_reg		= TNETV107X_CHIP_CFG_BASE + 0x018,
+	.cpu_clks		= clks,
+	.psc_bases		= psc_regs,
+	.psc_bases_num		= ARRAY_SIZE(psc_regs),
+	.pinmux_base		= TNETV107X_CHIP_CFG_BASE + 0x150,
+	.pinmux_pins		= pins,
+	.pinmux_pins_num	= ARRAY_SIZE(pins),
+	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
+	.intc_base		= TNETV107X_INTC_BASE,
+	.intc_irq_prios		= irq_prios,
+	.intc_irq_num		= TNETV107X_N_CP_INTC_IRQ,
+	.intc_host_map		= intc_host_map,
+	.gpio_base		= TNETV107X_GPIO_BASE,
+	.gpio_type		= GPIO_TYPE_TNETV107X,
+	.gpio_num		= TNETV107X_N_GPIO,
+	.timer_info		= &timer_info,
+	.serial_dev		= &tnetv107x_serial_device,
+	.reset			= tnetv107x_watchdog_reset,
+	.reset_device		= &tnetv107x_wdt_device,
+};
+
+void __init tnetv107x_init(void)
+{
+	davinci_common_init(&tnetv107x_soc_info);
+}
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 5da2cf402c81..f7a12586a1f5 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -752,6 +752,67 @@ void __init dove_xor1_init(void)
 	platform_device_register(&dove_xor11_channel);
 }
 
+/*****************************************************************************
+ * SDIO
+ ****************************************************************************/
+static u64 sdio_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_sdio0_resources[] = {
+	{
+		.start	= DOVE_SDIO0_PHYS_BASE,
+		.end	= DOVE_SDIO0_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SDIO0,
+		.end	= IRQ_DOVE_SDIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_sdio0 = {
+	.name		= "sdhci-mv",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &sdio_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= dove_sdio0_resources,
+	.num_resources	= ARRAY_SIZE(dove_sdio0_resources),
+};
+
+void __init dove_sdio0_init(void)
+{
+	platform_device_register(&dove_sdio0);
+}
+
+static struct resource dove_sdio1_resources[] = {
+	{
+		.start	= DOVE_SDIO1_PHYS_BASE,
+		.end	= DOVE_SDIO1_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SDIO1,
+		.end	= IRQ_DOVE_SDIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_sdio1 = {
+	.name		= "sdhci-mv",
+	.id		= 1,
+	.dev		= {
+		.dma_mask		= &sdio_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= dove_sdio1_resources,
+	.num_resources	= ARRAY_SIZE(dove_sdio1_resources),
+};
+
+void __init dove_sdio1_init(void)
+{
+	platform_device_register(&dove_sdio1);
+}
+
 void __init dove_init(void)
 {
 	int tclk;
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index b29e8937de4f..a51517c3fe76 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -36,5 +36,7 @@ void dove_uart3_init(void);
 void dove_spi0_init(void);
 void dove_spi1_init(void);
 void dove_i2c_init(void);
+void dove_sdio0_init(void);
+void dove_sdio1_init(void);
 
 #endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index f2971b745224..95925aa76dd9 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -82,6 +82,8 @@ static void __init dove_db_init(void)
 	dove_ehci0_init();
 	dove_ehci1_init();
 	dove_sata_init(&dove_db_sata_data);
+	dove_sdio0_init();
+	dove_sdio1_init();
 	dove_spi0_init();
 	dove_spi1_init();
 	dove_uart0_init();
@@ -92,8 +94,6 @@ static void __init dove_db_init(void)
 }
 
 MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
-	.phys_io	= DOVE_SB_REGS_PHYS_BASE,
-	.io_pg_offst	= ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= dove_db_init,
 	.map_io		= dove_map_io,
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index 1521d13f1d14..da8bf2bad3b1 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =DOVE_SB_REGS_PHYS_BASE
-	ldrne	\rx, =DOVE_SB_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =DOVE_SB_REGS_PHYS_BASE
+	ldr	\rv, =DOVE_SB_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
index 3b3e4721ce2e..eb4936ff90ad 100644
--- a/arch/arm/mach-dove/include/mach/io.h
+++ b/arch/arm/mach-dove/include/mach/io.h
@@ -13,8 +13,8 @@
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-#define __io(a)  ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
-				   DOVE_PCIE0_IO_VIRT_BASE))
-#define __mem_pci(a)		(a)
+#define __io(a)  	((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
+						 DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index c7bc7fbb11a6..5df4099fc14f 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -280,8 +280,6 @@ arch_initcall(ebsa110_init);
 
 MACHINE_START(EBSA110, "EBSA110")
 	/* Maintainer: Russell King */
-	.phys_io	= 0xe0000000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000400,
 	.reserve_lp0	= 1,
 	.reserve_lp2	= 1,
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index ebbd89f0e6c0..7ef5690fd08c 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
  *
 **/
 
-		.macro	addruart, rx, tmp
-		mov	\rx, #0xf0000000
-		orr	\rx, \rx, #0x00000be0
+		.macro	addruart, rp, rv
+		mov	\rp, #0xf0000000
+		orr	\rp, \rp, #0x00000be0
+		mov	\rp, \rv
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
index 9b44c19e95ec..60bde56fba4c 100644
--- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1f000000)
+#define VMALLOC_END       0xdf000000
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3a1a855bfdca..61b98ce4b673 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
@@ -21,26 +20,6 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data adssphere_flash_data = {
-	.width		= 4,
-};
-
-static struct resource adssphere_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device adssphere_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &adssphere_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &adssphere_flash_resource,
-};
-
 static struct ep93xx_eth_data __initdata adssphere_eth_data = {
 	.phy_id		= 1,
 };
@@ -48,15 +27,12 @@ static struct ep93xx_eth_data __initdata adssphere_eth_data = {
 static void __init adssphere_init_machine(void)
 {
 	ep93xx_init_devices();
-	platform_device_register(&adssphere_flash);
-
+	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
 	ep93xx_register_eth(&adssphere_eth_data, 1);
 }
 
 MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index e29bdef9b2e2..ef06c66a6f16 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -43,7 +43,8 @@ static unsigned long get_uart_rate(struct clk *clk);
 
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
 static int set_div_rate(struct clk *clk, unsigned long rate);
-
+static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate);
+static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate);
 
 static struct clk clk_xtali = {
 	.rate		= EP93XX_EXT_CLK_RATE,
@@ -112,6 +113,29 @@ static struct clk clk_video = {
 	.set_rate	= set_div_rate,
 };
 
+static struct clk clk_i2s_mclk = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_CLKDIV_ENABLE,
+	.set_rate	= set_div_rate,
+};
+
+static struct clk clk_i2s_sclk = {
+	.sw_locked	= 1,
+	.parent		= &clk_i2s_mclk,
+	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_I2SCLKDIV_SENA,
+	.set_rate	= set_i2s_sclk_rate,
+};
+
+static struct clk clk_i2s_lrclk = {
+	.sw_locked	= 1,
+	.parent		= &clk_i2s_sclk,
+	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_I2SCLKDIV_SENA,
+	.set_rate	= set_i2s_lrclk_rate,
+};
+
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
 	.parent		= &clk_h,
@@ -185,12 +209,15 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"pll1",		&clk_pll1),
 	INIT_CK(NULL,			"fclk",		&clk_f),
 	INIT_CK(NULL,			"hclk",		&clk_h),
-	INIT_CK(NULL,			"pclk",		&clk_p),
+	INIT_CK(NULL,			"apb_pclk",	&clk_p),
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
 	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
 	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
+	INIT_CK("ep93xx-i2s",		"mclk",		&clk_i2s_mclk),
+	INIT_CK("ep93xx-i2s",		"sclk",		&clk_i2s_sclk),
+	INIT_CK("ep93xx-i2s",		"lrclk",	&clk_i2s_lrclk),
 	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
@@ -331,8 +358,7 @@ static int calc_clk_div(struct clk *clk, unsigned long rate,
 	int i, found = 0, __div = 0, __pdiv = 0;
 
 	/* Don't exceed the maximum rate */
-	max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
-		       clk_xtali.rate / 4);
+	max_rate = max3(clk_pll1.rate / 4, clk_pll2.rate / 4, clk_xtali.rate / 4);
 	rate = min(rate, max_rate);
 
 	/*
@@ -401,6 +427,44 @@ static int set_div_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned val = __raw_readl(clk->enable_reg);
+
+	if (rate == clk_i2s_mclk.rate / 2)
+		ep93xx_syscon_swlocked_write(val & ~EP93XX_I2SCLKDIV_SDIV, 
+					     clk->enable_reg);
+	else if (rate == clk_i2s_mclk.rate / 4)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_SDIV, 
+					     clk->enable_reg);
+	else
+		return -EINVAL;
+
+	clk_i2s_sclk.rate = rate;
+	return 0;
+}
+
+static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned val = __raw_readl(clk->enable_reg) & 
+		~EP93XX_I2SCLKDIV_LRDIV_MASK;
+	
+	if (rate == clk_i2s_sclk.rate / 32)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV32,
+					     clk->enable_reg);
+	else if (rate == clk_i2s_sclk.rate / 64)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV64,
+					     clk->enable_reg);
+	else if (rate == clk_i2s_sclk.rate / 128)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV128,
+					     clk->enable_reg);
+	else
+		return -EINVAL;
+
+	clk_i2s_lrclk.rate = rate;
+	return 0;
+}
+
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	if (clk->set_rate)
@@ -495,4 +559,4 @@ static int __init ep93xx_clock_init(void)
 	clkdev_add_table(clocks, ARRAY_SIZE(clocks));
 	return 0;
 }
-arch_initcall(ep93xx_clock_init);
+postcore_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 9092677f63eb..ffdf87be2958 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -29,6 +29,7 @@
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
+#include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
@@ -215,8 +216,8 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
 	spin_lock_irqsave(&syscon_swlock, flags);
 
 	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
-	val |= set_bits;
 	val &= ~clear_bits;
+	val |= set_bits;
 	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
 
@@ -348,6 +349,43 @@ static struct platform_device ep93xx_ohci_device = {
 
 
 /*************************************************************************
+ * EP93xx physmap'ed flash
+ *************************************************************************/
+static struct physmap_flash_data ep93xx_flash_data;
+
+static struct resource ep93xx_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ep93xx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &ep93xx_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &ep93xx_flash_resource,
+};
+
+/**
+ * ep93xx_register_flash() - Register the external flash device.
+ * @width:	bank width in octets
+ * @start:	resource start address
+ * @size:	resource size
+ */
+void __init ep93xx_register_flash(unsigned int width,
+				  resource_size_t start, resource_size_t size)
+{
+	ep93xx_flash_data.width		= width;
+
+	ep93xx_flash_resource.start	= start;
+	ep93xx_flash_resource.end	= start + size - 1;
+
+	platform_device_register(&ep93xx_flash);
+}
+
+
+/*************************************************************************
  * EP93xx ethernet peripheral handling
  *************************************************************************/
 static struct ep93xx_eth_data ep93xx_eth_data;
@@ -620,6 +658,11 @@ static struct platform_device ep93xx_fb_device = {
 	.resource		= ep93xx_fb_resource,
 };
 
+static struct platform_device ep93xx_bl_device = {
+	.name		= "ep93xx-bl",
+	.id		= -1,
+};
+
 /**
  * ep93xx_register_fb - Register the framebuffer platform device.
  * @data:	platform specific framebuffer configuration (__initdata)
@@ -628,6 +671,7 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 {
 	ep93xxfb_data = *data;
 	platform_device_register(&ep93xx_fb_device);
+	platform_device_register(&ep93xx_bl_device);
 }
 
 
@@ -714,6 +758,113 @@ void ep93xx_keypad_release_gpio(struct platform_device *pdev)
 }
 EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
 
+/*************************************************************************
+ * EP93xx I2S audio peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_i2s_resource[] = {
+	{
+		.start	= EP93XX_I2S_PHYS_BASE,
+		.end	= EP93XX_I2S_PHYS_BASE + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_i2s_device = {
+	.name		= "ep93xx-i2s",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_i2s_resource),
+	.resource	= ep93xx_i2s_resource,
+};
+
+static struct platform_device ep93xx_pcm_device = {
+	.name		= "ep93xx-pcm-audio",
+	.id		= -1,
+};
+
+void __init ep93xx_register_i2s(void)
+{
+	platform_device_register(&ep93xx_i2s_device);
+	platform_device_register(&ep93xx_pcm_device);
+}
+
+#define EP93XX_SYSCON_DEVCFG_I2S_MASK	(EP93XX_SYSCON_DEVCFG_I2SONSSP | \
+					 EP93XX_SYSCON_DEVCFG_I2SONAC97)
+
+#define EP93XX_I2SCLKDIV_MASK		(EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
+					 EP93XX_SYSCON_I2SCLKDIV_SPOL)
+
+int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
+{
+	unsigned val;
+
+	/* Sanity check */
+	if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK)
+		return -EINVAL;
+	if (i2s_config & ~EP93XX_I2SCLKDIV_MASK)
+		return -EINVAL;
+
+	/* Must have only one of I2SONSSP/I2SONAC97 set */
+	if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) ==
+	    (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97))
+		return -EINVAL;
+
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
+	ep93xx_devcfg_set_bits(i2s_pins);
+
+	/*
+	 * This is potentially racy with the clock api for i2s_mclk, sclk and 
+	 * lrclk. Since the i2s driver is the only user of those clocks we
+	 * rely on it to prevent parallel use of this function and the 
+	 * clock api for the i2s clocks.
+	 */
+	val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
+	val &= ~EP93XX_I2SCLKDIV_MASK;
+	val |= i2s_config;
+	ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
+
+	return 0;
+}
+EXPORT_SYMBOL(ep93xx_i2s_acquire);
+
+void ep93xx_i2s_release(void)
+{
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
+}
+EXPORT_SYMBOL(ep93xx_i2s_release);
+
+/*************************************************************************
+ * EP93xx AC97 audio peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_ac97_resources[] = {
+	{
+		.start	= EP93XX_AAC_PHYS_BASE,
+		.end	= EP93XX_AAC_PHYS_BASE + 0xb0 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_EP93XX_AACINTR,
+		.end	= IRQ_EP93XX_AACINTR,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ep93xx_ac97_device = {
+	.name		= "ep93xx-ac97",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_ac97_resources),
+	.resource	= ep93xx_ac97_resources,
+};
+
+void __init ep93xx_register_ac97(void)
+{
+	/*
+	 * Make sure that the AC97 pins are not used by I2S.
+	 */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
+
+	platform_device_register(&ep93xx_ac97_device);
+	platform_device_register(&ep93xx_pcm_device);
+}
 
 extern void ep93xx_gpio_init(void);
 
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index 8904ca4e2e24..a696d354b1f8 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -276,7 +276,7 @@ static void channel_disable(struct m2p_channel *ch)
 	v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN);
 	m2p_set_control(ch, v);
 
-	while (m2p_channel_state(ch) == STATE_ON)
+	while (m2p_channel_state(ch) >= STATE_ON)
 		cpu_relax();
 
 	m2p_set_control(ch, 0x0);
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 3884182cd362..4b0431652131 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -38,39 +37,13 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data edb93xx_flash_data;
-
-static struct resource edb93xx_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb93xx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb93xx_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb93xx_flash_resource,
-};
-
-static void __init __edb93xx_register_flash(unsigned int width,
-			resource_size_t start, resource_size_t size)
-{
-	edb93xx_flash_data.width	= width;
-	edb93xx_flash_resource.start	= start;
-	edb93xx_flash_resource.end	= start + size - 1;
-
-	platform_device_register(&edb93xx_flash);
-}
-
 static void __init edb93xx_register_flash(void)
 {
 	if (machine_is_edb9307() || machine_is_edb9312() ||
 	    machine_is_edb9315()) {
-		__edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+		ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
 	} else {
-		__edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
 	}
 }
 
@@ -151,8 +124,6 @@ static void __init edb93xx_init_machine(void)
 #ifdef CONFIG_MACH_EDB9301
 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -164,8 +135,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9302
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	/* Maintainer: George Kashperko <george@chas.com.ua> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -177,8 +146,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9302A
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -190,8 +157,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9307
 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -203,8 +168,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9307A
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -216,8 +179,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9312
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -229,8 +190,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9315
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -242,8 +201,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9315A
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index a809618e9f05..9bd3152bff9a 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
@@ -21,26 +20,6 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data gesbc9312_flash_data = {
-	.width		= 4,
-};
-
-static struct resource gesbc9312_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gesbc9312_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &gesbc9312_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gesbc9312_flash_resource,
-};
-
 static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
 	.phy_id		= 1,
 };
@@ -48,15 +27,12 @@ static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
 static void __init gesbc9312_init_machine(void)
 {
 	ep93xx_init_devices();
-	platform_device_register(&gesbc9312_flash);
-
+	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M);
 	ep93xx_register_eth(&gesbc9312_eth_data, 0);
 }
 
 MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index 5cd22444e223..b25bc9076367 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,12 +11,11 @@
  */
 #include <mach/ep93xx-regs.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
-		ldrne	\rx, =EP93XX_APB_VIRT_BASE	@ virtual base
-		orr	\rx, \rx, #0x000c0000
+		.macro	addruart, rp, rv
+		ldr	\rp, =EP93XX_APB_PHYS_BASE	@ Physical base
+		ldr	\rv, =EP93XX_APB_VIRT_BASE	@ virtual base
+		orr	\rp, \rp, #0x000c0000
+		orr	\rv, \rv, #0x000c0000
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index b1e096f0c2d2..9ac4d1055097 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -93,6 +93,7 @@
 /* APB peripherals */
 #define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
 
+#define EP93XX_I2S_PHYS_BASE		EP93XX_APB_PHYS(0x00020000)
 #define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
 
 #define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
@@ -104,6 +105,7 @@
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
 #define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
 
+#define EP93XX_AAC_PHYS_BASE		EP93XX_APB_PHYS(0x00080000)
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
 #define EP93XX_SPI_PHYS_BASE		EP93XX_APB_PHYS(0x000a0000)
@@ -194,6 +196,15 @@
 #define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
 #define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
 #define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
+#define EP93XX_SYSCON_I2SCLKDIV		EP93XX_SYSCON_REG(0x8c)
+#define EP93XX_SYSCON_I2SCLKDIV_SENA	(1<<31)
+#define EP93XX_SYSCON_I2SCLKDIV_ORIDE   (1<<29)
+#define EP93XX_SYSCON_I2SCLKDIV_SPOL	(1<<19)
+#define EP93XX_I2SCLKDIV_SDIV		(1 << 16)
+#define EP93XX_I2SCLKDIV_LRDIV32	(0 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV64	(1 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV128 	(2 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV_MASK 	(3 << 17)
 #define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 9a4413dd44bb..50660455b1d8 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -43,6 +43,9 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 
 unsigned int ep93xx_chip_revision(void);
 
+void ep93xx_register_flash(unsigned int width,
+			   resource_size_t start, resource_size_t size);
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 			 struct i2c_board_info *devices, int num);
@@ -55,6 +58,10 @@ void ep93xx_pwm_release_gpio(struct platform_device *pdev);
 void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
 int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
 void ep93xx_keypad_release_gpio(struct platform_device *pdev);
+void ep93xx_register_i2s(void);
+int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config);
+void ep93xx_i2s_release(void);
+void ep93xx_register_ac97(void);
 
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 1cc911b4efa6..7adea6258efe 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -31,31 +30,6 @@
  * Micro9-Lite uses a separate MTD map driver for flash support
  * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
-static struct physmap_flash_data micro9_flash_data;
-
-static struct resource micro9_flash_resource = {
-	.start		= EP93XX_CS1_PHYS_BASE,
-	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device micro9_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &micro9_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &micro9_flash_resource,
-};
-
-static void __init __micro9_register_flash(unsigned int width)
-{
-	micro9_flash_data.width = width;
-
-	platform_device_register(&micro9_flash);
-}
-
 static unsigned int __init micro9_detect_bootwidth(void)
 {
 	u32 v;
@@ -70,10 +44,17 @@ static unsigned int __init micro9_detect_bootwidth(void)
 
 static void __init micro9_register_flash(void)
 {
+	unsigned int width;
+
 	if (machine_is_micro9())
-		__micro9_register_flash(4);
+		width = 4;
 	else if (machine_is_micro9m() || machine_is_micro9s())
-		__micro9_register_flash(micro9_detect_bootwidth());
+		width = micro9_detect_bootwidth();
+	else
+		width = 0;
+
+	if (width)
+		ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M);
 }
 
 
@@ -96,8 +77,6 @@ static void __init micro9_init_machine(void)
 #ifdef CONFIG_MACH_MICRO9H
 MACHINE_START(MICRO9, "Contec Micro9-High")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -109,8 +88,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9M
 MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -122,8 +99,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9L
 MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
@@ -135,8 +110,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9S
 MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 388aec95f60e..d96dc1c5da20 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -18,7 +18,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -29,26 +28,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-static struct physmap_flash_data simone_flash_data = {
-	.width		= 2,
-};
-
-static struct resource simone_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device simone_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &simone_flash_resource,
-	.dev = {
-		.platform_data	= &simone_flash_data,
-	},
-};
-
 static struct ep93xx_eth_data __initdata simone_eth_data = {
 	.phy_id		= 1,
 };
@@ -77,18 +56,16 @@ static struct i2c_board_info __initdata simone_i2c_board_info[] = {
 static void __init simone_init_machine(void)
 {
 	ep93xx_init_devices();
-
-	platform_device_register(&simone_flash);
+	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
 	ep93xx_register_eth(&simone_eth_data, 1);
 	ep93xx_register_fb(&simone_fb_info);
 	ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
 			    ARRAY_SIZE(simone_i2c_board_info));
+	ep93xx_register_ac97();
 }
 
 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 38deaee40397..ac601fe2b448 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -157,13 +157,12 @@ static void __init snappercl15_init_machine(void)
 	ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
 			    ARRAY_SIZE(snappercl15_i2c_data));
 	ep93xx_register_fb(&snappercl15_fb_info);
+	ep93xx_register_i2s();
 	platform_device_register(&snappercl15_nand_device);
 }
 
 MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index ae7319e588c7..c2d2cf40ead9 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -17,7 +17,6 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/m48t86.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
@@ -173,31 +172,13 @@ static struct platform_device ts72xx_nand_flash = {
 };
 
 
-/*************************************************************************
- * NOR flash (TS-7200 only)
- *************************************************************************/
-static struct physmap_flash_data ts72xx_nor_data = {
-	.width		= 2,
-};
-
-static struct resource ts72xx_nor_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ts72xx_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev.platform_data	= &ts72xx_nor_data,
-	.resource		= &ts72xx_nor_resource,
-	.num_resources		= 1,
-};
-
 static void __init ts72xx_register_flash(void)
 {
+	/*
+	 * TS7200 has NOR flash all other TS72xx board have NAND flash.
+	 */
 	if (board_is_ts7200()) {
-		platform_device_register(&ts72xx_nor_flash);
+		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
 	} else {
 		resource_size_t start;
 
@@ -276,8 +257,6 @@ static void __init ts72xx_init_machine(void)
 
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= EP93XX_APB_PHYS_BASE,
-	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 1b996b26d2e0..5b1a8db779be 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -86,8 +86,6 @@ fixup_cats(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(CATS, "Chalice-CATS")
 	/* Maintainer: Philip Blundell */
-	.phys_io	= DC21285_ARMCSR_BASE,
-	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.soft_reboot	= 1,
 	.fixup		= fixup_cats,
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 30040fd588cc..2ef69ff44ba8 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -15,8 +15,6 @@
 
 MACHINE_START(EBSA285, "EBSA285")
 	/* Maintainer: Russell King */
-	.phys_io	= DC21285_ARMCSR_BASE,
-	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.video_start	= 0x000a0000,
 	.video_end	= 0x000bffff,
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 60dda1318f22..3c9e0c40c679 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,12 +15,10 @@
 
 #ifndef CONFIG_DEBUG_DC21285_PORT
 	/* For NetWinder debugging */
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x7c000000	@ physical
-		movne	\rx, #0xff000000	@ virtual
-		orr	\rx, \rx, #0x000003f8
+		.macro	addruart, rp, rv
+		mov	\rp, #0x000003f8
+		orr	\rv, \rp, #0x7c000000	@ physical
+		orr	\rp, \rp, #0xff000000	@ virtual
 		.endm
 
 #define UART_SHIFT	0
@@ -32,14 +30,14 @@
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
 		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x42000000
-		movne	\rx, #dc21285_high
+		.macro	addruart, rp, rv
 		.if	dc21285_low
-		orrne	\rx, \rx, #dc21285_low
+		mov	\rp, #dc21285_low
+		.else
+		mov	\rp, #0
 		.endif
+		orr	\rv, \rp, #0x42000000
+		orr	\rp, \rp, #dc21285_high
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
index d0958d860a3c..0ffbb7c85e59 100644
--- a/arch/arm/mach-footbridge/include/mach/vmalloc.h
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  */
 
 
-#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
+#define VMALLOC_END       0xf0000000
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index ac7ffa6fc413..06e514f372d0 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -648,8 +648,6 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(NETWINDER, "Rebel-NetWinder")
 	/* Maintainer: Russell King/Rebel.com */
-	.phys_io	= DC21285_ARMCSR_BASE,
-	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.video_start	= 0x000a0000,
 	.video_end	= 0x000bffff,
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index e2c9f0690b16..3285e91ca8c1 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -15,8 +15,6 @@
 
 MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
 	/* Maintainer: Jamey Hicks / George France */
-	.phys_io	= DC21285_ARMCSR_BASE,
-	.io_pg_offst	= ((0xfe000000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
index 515b75cf2e8b..6f066ee4bf24 100644
--- a/arch/arm/mach-gemini/Kconfig
+++ b/arch/arm/mach-gemini/Kconfig
@@ -2,6 +2,13 @@ if ARCH_GEMINI
 
 menu "Cortina Systems Gemini Implementations"
 
+config MACH_NAS4220B
+	bool "Raidsonic NAS-4220-B"
+	select GEMINI_MEM_SWAP
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Raidsonic NAS-4220-B.
+
 config MACH_RUT100
 	bool "Teltonika RUT100"
 	select GEMINI_MEM_SWAP
@@ -9,6 +16,20 @@ config MACH_RUT100
 	  Say Y here if you intend to run this kernel on a
 	  Teltonika 3G Router RUT100.
 
+config MACH_WBD111
+	bool "Wiliboard WBD-111"
+	select GEMINI_MEM_SWAP
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Wiliboard WBD-111.
+
+config MACH_WBD222
+        bool "Wiliboard WBD-222"
+        select GEMINI_MEM_SWAP
+        help
+          Say Y here if you intend to run this kernel on a
+          Wiliboard WBD-222.
+
 endmenu
 
 config GEMINI_MEM_SWAP
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index 719505b81821..c5b24b95a76e 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -7,4 +7,7 @@
 obj-y			:= irq.o mm.o time.o devices.o gpio.o
 
 # Board-specific support
+obj-$(CONFIG_MACH_NAS4220B)	+= board-nas4220b.o
 obj-$(CONFIG_MACH_RUT100)	+= board-rut1xx.o
+obj-$(CONFIG_MACH_WBD111)	+= board-wbd111.o
+obj-$(CONFIG_MACH_WBD222)	+= board-wbd222.o
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
new file mode 100644
index 000000000000..2ba096de0034
--- /dev/null
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -0,0 +1,109 @@
+/*
+ *  Support for Raidsonic NAS-4220-B
+ *
+ *  Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ *
+ * based on rut1xx.c
+ *  Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/mdio-gpio.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/global_reg.h>
+
+#include "common.h"
+
+static struct sys_timer ib4220b_timer = {
+	.init	= gemini_timer_init,
+};
+
+static struct gpio_led ib4220b_leds[] = {
+	{
+		.name			= "nas4220b:orange:hdd",
+		.default_trigger	= "none",
+		.gpio			= 60,
+	},
+	{
+		.name			= "nas4220b:green:os",
+		.default_trigger	= "heartbeat",
+		.gpio			= 62,
+	},
+};
+
+static struct gpio_led_platform_data ib4220b_leds_data = {
+	.num_leds	= ARRAY_SIZE(ib4220b_leds),
+	.leds		= ib4220b_leds,
+};
+
+static struct platform_device ib4220b_led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &ib4220b_leds_data,
+	},
+};
+
+static struct gpio_keys_button ib4220b_keys[] = {
+	{
+		.code		= KEY_SETUP,
+		.gpio		= 61,
+		.active_low	= 1,
+		.desc		= "Backup Button",
+		.type		= EV_KEY,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 63,
+		.active_low	= 1,
+		.desc		= "Softreset Button",
+		.type		= EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data ib4220b_keys_data = {
+	.buttons	= ib4220b_keys,
+	.nbuttons	= ARRAY_SIZE(ib4220b_keys),
+};
+
+static struct platform_device ib4220b_key_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &ib4220b_keys_data,
+	},
+};
+
+static void __init ib4220b_init(void)
+{
+	gemini_gpio_init();
+	platform_register_uart();
+	platform_register_pflash(SZ_16M, NULL, 0);
+	platform_device_register(&ib4220b_led_device);
+	platform_device_register(&ib4220b_key_device);
+}
+
+MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
+	.boot_params	= 0x100,
+	.map_io		= gemini_map_io,
+	.init_irq	= gemini_init_irq,
+	.timer		= &ib4220b_timer,
+	.init_machine	= ib4220b_init,
+MACHINE_END
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index e0de968e32a6..a9a0d8b01942 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -85,8 +85,6 @@ static void __init rut1xx_init(void)
 }
 
 MACHINE_START(RUT100, "Teltonika RUT100")
-	.phys_io	= 0x7fffc000,
-	.io_pg_offst	= ((0xffffc000) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
new file mode 100644
index 000000000000..8b88d50d4337
--- /dev/null
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -0,0 +1,141 @@
+/*
+ *  Support for Wiliboard WBD-111
+ *
+ *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/skbuff.h>
+#include <linux/gpio_keys.h>
+#include <linux/mdio-gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+
+#include "common.h"
+
+static struct gpio_keys_button wbd111_keys[] = {
+	{
+		.code		= KEY_SETUP,
+		.gpio		= 5,
+		.active_low	= 1,
+		.desc		= "reset",
+		.type		= EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data wbd111_keys_data = {
+	.buttons	= wbd111_keys,
+	.nbuttons	= ARRAY_SIZE(wbd111_keys),
+};
+
+static struct platform_device wbd111_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wbd111_keys_data,
+	},
+};
+
+static struct gpio_led wbd111_leds[] = {
+	{
+		.name			= "L3red",
+		.gpio			= 1,
+	},
+	{
+		.name			= "L4green",
+		.gpio			= 2,
+	},
+	{
+		.name			= "L4red",
+		.gpio			= 3,
+	},
+	{
+		.name			= "L3green",
+		.gpio			= 5,
+	},
+};
+
+static struct gpio_led_platform_data wbd111_leds_data = {
+	.num_leds	= ARRAY_SIZE(wbd111_leds),
+	.leds		= wbd111_leds,
+};
+
+static struct platform_device wbd111_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wbd111_leds_data,
+	},
+};
+
+static struct sys_timer wbd111_timer = {
+	.init	= gemini_timer_init,
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wbd111_partitions[] = {
+	{
+		.name		= "RedBoot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x020000,
+		.size		= 0x100000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x120000,
+		.size		= 0x6a0000,
+	} , {
+		.name		= "VCTL",
+		.offset		= 0x7c0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "cfg",
+		.offset		= 0x7d0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "FIS",
+		.offset		= 0x7e0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+#define wbd111_num_partitions	ARRAY_SIZE(wbd111_partitions)
+#else
+#define wbd111_partitions	NULL
+#define wbd111_num_partitions	0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static void __init wbd111_init(void)
+{
+	gemini_gpio_init();
+	platform_register_uart();
+	platform_register_pflash(SZ_8M, wbd111_partitions,
+				 wbd111_num_partitions);
+	platform_device_register(&wbd111_leds_device);
+	platform_device_register(&wbd111_keys_device);
+}
+
+MACHINE_START(WBD111, "Wiliboard WBD-111")
+	.boot_params	= 0x100,
+	.map_io		= gemini_map_io,
+	.init_irq	= gemini_init_irq,
+	.timer		= &wbd111_timer,
+	.init_machine	= wbd111_init,
+MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
new file mode 100644
index 000000000000..1eebcecd1c33
--- /dev/null
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -0,0 +1,141 @@
+/*
+ *  Support for Wiliboard WBD-222
+ *
+ *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/skbuff.h>
+#include <linux/gpio_keys.h>
+#include <linux/mdio-gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+
+#include "common.h"
+
+static struct gpio_keys_button wbd222_keys[] = {
+	{
+		.code		= KEY_SETUP,
+		.gpio		= 5,
+		.active_low	= 1,
+		.desc		= "reset",
+		.type		= EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data wbd222_keys_data = {
+	.buttons	= wbd222_keys,
+	.nbuttons	= ARRAY_SIZE(wbd222_keys),
+};
+
+static struct platform_device wbd222_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wbd222_keys_data,
+	},
+};
+
+static struct gpio_led wbd222_leds[] = {
+	{
+		.name			= "L3red",
+		.gpio			= 1,
+	},
+	{
+		.name			= "L4green",
+		.gpio			= 2,
+	},
+	{
+		.name			= "L4red",
+		.gpio			= 3,
+	},
+	{
+		.name			= "L3green",
+		.gpio			= 5,
+	},
+};
+
+static struct gpio_led_platform_data wbd222_leds_data = {
+	.num_leds	= ARRAY_SIZE(wbd222_leds),
+	.leds		= wbd222_leds,
+};
+
+static struct platform_device wbd222_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wbd222_leds_data,
+	},
+};
+
+static struct sys_timer wbd222_timer = {
+	.init	= gemini_timer_init,
+};
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wbd222_partitions[] = {
+	{
+		.name		= "RedBoot",
+		.offset		= 0,
+		.size		= 0x020000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "kernel",
+		.offset		= 0x020000,
+		.size		= 0x100000,
+	} , {
+		.name		= "rootfs",
+		.offset		= 0x120000,
+		.size		= 0x6a0000,
+	} , {
+		.name		= "VCTL",
+		.offset		= 0x7c0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "cfg",
+		.offset		= 0x7d0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	} , {
+		.name		= "FIS",
+		.offset		= 0x7e0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+#define wbd222_num_partitions	ARRAY_SIZE(wbd222_partitions)
+#else
+#define wbd222_partitions	NULL
+#define wbd222_num_partitions	0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static void __init wbd222_init(void)
+{
+	gemini_gpio_init();
+	platform_register_uart();
+	platform_register_pflash(SZ_8M, wbd222_partitions,
+		wbd222_num_partitions);
+	platform_device_register(&wbd222_leds_device);
+	platform_device_register(&wbd222_keys_device);
+}
+
+MACHINE_START(WBD222, "Wiliboard WBD-222")
+	.boot_params	= 0x100,
+	.map_io		= gemini_map_io,
+	.init_irq	= gemini_init_irq,
+	.timer		= &wbd222_timer,
+	.init_machine	= wbd222_init,
+MACHINE_END
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index ad477047069d..f40e006d296e 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,11 +11,9 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =GEMINI_UART_BASE			@ physical
-	ldrne	\rx, =IO_ADDRESS(GEMINI_UART_BASE)	@ virtual
+	.macro	addruart, rp, rv
+	ldr	\rp, =GEMINI_UART_BASE			@ physical
+	ldr	\rv, =IO_ADDRESS(GEMINI_UART_BASE)	@ virtual
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 78be457dc324..79f0b896e446 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -30,8 +30,6 @@
 
 MACHINE_START(H7201, "Hynix GMS30C7201")
 	/* Maintainer: Robert Schwebel, Pengutronix */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0001000,
 	.map_io		= h720x_map_io,
 	.init_irq	= h720x_init_irq,
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 8c0ba99d683f..cc28b1efe047 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -72,8 +72,6 @@ static void __init init_eval_h7202(void)
 
 MACHINE_START(H7202, "Hynix HMS30C7202")
 	/* Maintainer: Robert Schwebel, Pengutronix */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x40000100,
 	.map_io		= h720x_map_io,
 	.init_irq	= h7202_init_irq,
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index 27cafd12f033..c2093e835720 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -16,12 +16,10 @@
 		.equ    io_virt, IO_VIRT
 		.equ    io_phys, IO_PHYS
 
-		.macro  addruart, rx, tmp
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1  	       @ MMU enabled?
-		moveq   \rx, #io_phys	       @ physical base address
-		movne   \rx, #io_virt	       @ virtual address
-		add     \rx, \rx, #0x00020000   @ UART1
+		.macro  addruart, rp, rv
+		mov     \rp, #0x00020000	@ UART1
+		add     \rv, \rp, #io_virt	@ virtual address
+		add     \rp, \rp, #io_phys	@ physical base address
 		.endm
 
 		.macro  senduart,rd,rx
diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h
index 6c19156e2a42..c55a52c6541d 100644
--- a/arch/arm/mach-h720x/include/mach/hardware.h
+++ b/arch/arm/mach-h720x/include/mach/hardware.h
@@ -182,8 +182,6 @@
 #define SERIAL_ENABLE_EN	(1<<0)
 
 /* General defines to pacify gcc */
-#define PCIO_BASE 		(0)	/* for inb, outb and friends */
-#define PCIO_VIRT		PCIO_BASE
 
 #define __ASM_ARCH_HARDWARE_INCMACH_H
 #include "boards.h"
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
index ff1460d6841b..a45915b88756 100644
--- a/arch/arm/mach-h720x/include/mach/vmalloc.h
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -5,6 +5,6 @@
 #ifndef __ARCH_ARM_VMALLOC_H
 #define __ARCH_ARM_VMALLOC_H
 
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
 
 #endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
new file mode 100644
index 000000000000..197f9e241cff
--- /dev/null
+++ b/arch/arm/mach-imx/Kconfig
@@ -0,0 +1,204 @@
+config IMX_HAVE_DMA_V1
+	bool
+
+if ARCH_MX1
+
+config SOC_IMX1
+	select CPU_ARM920T
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
+comment "MX1 platforms:"
+config MACH_MXLADS
+	bool
+
+config ARCH_MX1ADS
+	bool "MX1ADS platform"
+	select MACH_MXLADS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
+
+config MACH_SCB9328
+	bool "Synertronixx scb9328"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Say Y here if you are using a Synertronixx scb9328 board
+
+endif
+
+if ARCH_MX2
+
+config SOC_IMX21
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
+config SOC_IMX27
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	bool
+
+choice
+	prompt "CPUs:"
+	default MACH_MX21
+
+config MACH_MX21
+	bool "i.MX21 support"
+	select SOC_IMX21
+	help
+	  This enables support for Freescale's MX2 based i.MX21 processor.
+
+config MACH_MX27
+	bool "i.MX27 support"
+	select SOC_IMX27
+	help
+	  This enables support for Freescale's MX2 based i.MX27 processor.
+
+endchoice
+
+endif
+
+if MACH_MX21
+
+comment "MX21 platforms:"
+
+config MACH_MX21ADS
+	bool "MX21ADS platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for MX21ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+endif
+
+if MACH_MX27
+
+comment "MX27 platforms:"
+
+config MACH_MX27ADS
+	bool "MX27ADS platform"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for MX27ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCM038
+	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_PCM038
+	default MACH_PCM970_BASEBOARD
+
+config MACH_PCM970_BASEBOARD
+	prompt "PHYTEC PCM970 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Phytec's
+	  PCM970 evaluation board.
+
+endchoice
+
+config MACH_CPUIMX27
+	bool "Eukrea CPUIMX27 module"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Eukrea CPUIMX27 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+	bool "CPUIMX27 integrates SDHC2 module"
+	depends on MACH_CPUIMX27
+	help
+	  This adds support for the internal SDHC2 used on CPUIMX27
+	  for wifi or eMMC.
+
+config MACH_EUKREA_CPUIMX27_USEUART4
+	bool "CPUIMX27 integrates UART4 module"
+	depends on MACH_CPUIMX27
+	help
+	  This adds support for the internal UART4 used on CPUIMX27
+	  for bluetooth.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_CPUIMX27
+	default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+	bool "Eukrea MBIMX27 development board"
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX27 evaluation board.
+
+endchoice
+
+config MACH_MX27_3DS
+	bool "MX27PDK platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for MX27PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_IMX27_VISSTRIM_M10
+	bool "Vista Silicon i.MX27 Visstrim_m10"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for Visstrim_m10 platform and its different variants.
+	  This includes specific configurations for the board and its
+	  peripherals.
+
+config MACH_IMX27LITE
+	bool "LogicPD MX27 LITEKIT platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for MX27 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCA100
+	bool "Phytec phyCARD-s (pca100)"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for phyCARD-s (aka pca100) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+config MACH_MXT_TD60
+	bool "Maxtrack i-MXT TD60"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for i-MXT (aka td60) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
new file mode 100644
index 000000000000..5582692bb176
--- /dev/null
+++ b/arch/arm/mach-imx/Makefile
@@ -0,0 +1,34 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y	:=  devices.o
+
+obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
+
+obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
+obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+
+obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
+
+# Support for CMOS sensor interface
+obj-$(CONFIG_MX1_VIDEO)	+= mx1-camera-fiq.o mx1-camera-fiq-ksym.o
+
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
+
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
+obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
new file mode 100644
index 000000000000..7988a85cf07d
--- /dev/null
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -0,0 +1,11 @@
+zreladdr-$(CONFIG_ARCH_MX1)	:= 0x08008000
+params_phys-$(CONFIG_ARCH_MX1)	:= 0x08000100
+initrd_phys-$(CONFIG_ARCH_MX1)	:= 0x08800000
+
+zreladdr-$(CONFIG_MACH_MX21)	:= 0xC0008000
+params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
+initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
+
+zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
+params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
+initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
new file mode 100644
index 000000000000..daca30b2d5b1
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx1.c
@@ -0,0 +1,636 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/math64.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#define IO_ADDR_CCM(off)	(MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
+
+/* CCM register addresses */
+#define CCM_CSCR	IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0	IO_ADDR_CCM(0x4)
+#define CCM_SPCTL0	IO_ADDR_CCM(0xc)
+#define CCM_PCDR	IO_ADDR_CCM(0x20)
+
+#define CCM_CSCR_CLKO_OFFSET	29
+#define CCM_CSCR_CLKO_MASK	(0x7 << 29)
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << 26)
+#define CCM_CSCR_OSC_EN_SHIFT	17
+#define CCM_CSCR_SYSTEM_SEL	(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xf << 10)
+#define CCM_CSCR_PRESC		(1 << 15)
+
+#define CCM_PCDR_PCLK3_OFFSET	16
+#define CCM_PCDR_PCLK3_MASK	(0x7f << 16)
+#define CCM_PCDR_PCLK2_OFFSET	4
+#define CCM_PCDR_PCLK2_MASK	(0xf << 4)
+#define CCM_PCDR_PCLK1_OFFSET	0
+#define CCM_PCDR_PCLK1_MASK	0xf
+
+#define IO_ADDR_SCM(off)	(MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
+
+/* SCM register addresses */
+#define SCM_GCCR	IO_ADDR_SCM(0xc)
+
+#define SCM_GCCR_DMA_CLK_EN_OFFSET	3
+#define SCM_GCCR_CSI_CLK_EN_OFFSET	2
+#define SCM_GCCR_MMA_CLK_EN_OFFSET	1
+#define SCM_GCCR_USBD_CLK_EN_OFFSET	0
+
+static int _clk_enable(struct clk *clk)
+{
+	unsigned int reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+	unsigned int reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_can_use_parent(const struct clk *clk_arr[], unsigned int size,
+			       struct clk *parent)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		if (parent == clk_arr[i])
+			return i;
+
+	return -EINVAL;
+}
+
+static unsigned long
+_clk_simple_round_rate(struct clk *clk, unsigned long rate, unsigned int limit)
+{
+	int div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > limit)
+		div = limit;
+
+	return parent_rate / div;
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->set_rate(clk->parent, rate);
+}
+
+static unsigned long clk16m_get_rate(struct clk *clk)
+{
+	return 16000000;
+}
+
+static struct clk clk16m = {
+	.get_rate = clk16m_get_rate,
+	.enable = _clk_enable,
+	.enable_reg = CCM_CSCR,
+	.enable_shift = CCM_CSCR_OSC_EN_SHIFT,
+	.disable = _clk_disable,
+};
+
+/* in Hz */
+static unsigned long clk32_rate;
+
+static unsigned long clk32_get_rate(struct clk *clk)
+{
+	return clk32_rate;
+}
+
+static struct clk clk32 = {
+	.get_rate = clk32_get_rate,
+};
+
+static unsigned long clk32_premult_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) * 512;
+}
+
+static struct clk clk32_premult = {
+	.parent = &clk32,
+	.get_rate = clk32_premult_get_rate,
+};
+
+static const struct clk *prem_clk_clocks[] = {
+	&clk32_premult,
+	&clk16m,
+};
+
+static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int i;
+	unsigned int reg = __raw_readl(CCM_CSCR);
+
+	i = _clk_can_use_parent(prem_clk_clocks, ARRAY_SIZE(prem_clk_clocks),
+				parent);
+
+	switch (i) {
+	case 0:
+		reg &= ~CCM_CSCR_SYSTEM_SEL;
+		break;
+	case 1:
+		reg |= CCM_CSCR_SYSTEM_SEL;
+		break;
+	default:
+		return i;
+	}
+
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
+static struct clk prem_clk = {
+	.set_parent = prem_clk_set_parent,
+};
+
+static unsigned long system_clk_get_rate(struct clk *clk)
+{
+	return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
+			      clk_get_rate(clk->parent));
+}
+
+static struct clk system_clk = {
+	.parent = &prem_clk,
+	.get_rate = system_clk_get_rate,
+};
+
+static unsigned long mcu_clk_get_rate(struct clk *clk)
+{
+	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
+			      clk_get_rate(clk->parent));
+}
+
+static struct clk mcu_clk = {
+	.parent = &clk32_premult,
+	.get_rate = mcu_clk_get_rate,
+};
+
+static unsigned long fclk_get_rate(struct clk *clk)
+{
+	unsigned long fclk = clk_get_rate(clk->parent);
+
+	if (__raw_readl(CCM_CSCR) & CCM_CSCR_PRESC)
+		fclk /= 2;
+
+	return fclk;
+}
+
+static struct clk fclk = {
+	.parent = &mcu_clk,
+	.get_rate = fclk_get_rate,
+};
+
+/*
+ *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
+ */
+static unsigned long hclk_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
+			CCM_CSCR_BCLK_MASK) >> CCM_CSCR_BCLK_OFFSET) + 1);
+}
+
+static unsigned long hclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 16);
+}
+
+static int hclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_BCLK_MASK;
+	reg |= div << CCM_CSCR_BCLK_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
+static struct clk hclk = {
+	.parent = &system_clk,
+	.get_rate = hclk_get_rate,
+	.round_rate = hclk_round_rate,
+	.set_rate = hclk_set_rate,
+};
+
+static unsigned long clk48m_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
+			CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET) + 1);
+}
+
+static unsigned long clk48m_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 8);
+}
+
+static int clk48m_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_USB_MASK;
+	reg |= div << CCM_CSCR_USB_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
+static struct clk clk48m = {
+	.parent = &system_clk,
+	.get_rate = clk48m_get_rate,
+	.round_rate = clk48m_round_rate,
+	.set_rate = clk48m_set_rate,
+};
+
+/*
+ *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
+ */
+static unsigned long perclk1_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
+			CCM_PCDR_PCLK1_MASK) >> CCM_PCDR_PCLK1_OFFSET) + 1);
+}
+
+static unsigned long perclk1_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 16);
+}
+
+static int perclk1_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_PCDR);
+	reg &= ~CCM_PCDR_PCLK1_MASK;
+	reg |= div << CCM_PCDR_PCLK1_OFFSET;
+	__raw_writel(reg, CCM_PCDR);
+
+	return 0;
+}
+
+/*
+ *  get peripheral clock 2 ( LCD, SD, SPI[12] )
+ */
+static unsigned long perclk2_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
+			CCM_PCDR_PCLK2_MASK) >> CCM_PCDR_PCLK2_OFFSET) + 1);
+}
+
+static unsigned long perclk2_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 16);
+}
+
+static int perclk2_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_PCDR);
+	reg &= ~CCM_PCDR_PCLK2_MASK;
+	reg |= div << CCM_PCDR_PCLK2_OFFSET;
+	__raw_writel(reg, CCM_PCDR);
+
+	return 0;
+}
+
+/*
+ *  get peripheral clock 3 ( SSI )
+ */
+static unsigned long perclk3_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
+			CCM_PCDR_PCLK3_MASK) >> CCM_PCDR_PCLK3_OFFSET) + 1);
+}
+
+static unsigned long perclk3_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_simple_round_rate(clk, rate, 128);
+}
+
+static int perclk3_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	unsigned int reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 128 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_PCDR);
+	reg &= ~CCM_PCDR_PCLK3_MASK;
+	reg |= div << CCM_PCDR_PCLK3_OFFSET;
+	__raw_writel(reg, CCM_PCDR);
+
+	return 0;
+}
+
+static struct clk perclk[] = {
+	{
+		.id = 0,
+		.parent = &system_clk,
+		.get_rate = perclk1_get_rate,
+		.round_rate = perclk1_round_rate,
+		.set_rate = perclk1_set_rate,
+	}, {
+		.id = 1,
+		.parent = &system_clk,
+		.get_rate = perclk2_get_rate,
+		.round_rate = perclk2_round_rate,
+		.set_rate = perclk2_set_rate,
+	}, {
+		.id = 2,
+		.parent = &system_clk,
+		.get_rate = perclk3_get_rate,
+		.round_rate = perclk3_round_rate,
+		.set_rate = perclk3_set_rate,
+	}
+};
+
+static const struct clk *clko_clocks[] = {
+	&perclk[0],
+	&hclk,
+	&clk48m,
+	&clk16m,
+	&prem_clk,
+	&fclk,
+};
+
+static int clko_set_parent(struct clk *clk, struct clk *parent)
+{
+	int i;
+	unsigned int reg;
+
+	i = _clk_can_use_parent(clko_clocks, ARRAY_SIZE(clko_clocks), parent);
+	if (i < 0)
+		return i;
+
+	reg = __raw_readl(CCM_CSCR) & ~CCM_CSCR_CLKO_MASK;
+	reg |= i << CCM_CSCR_CLKO_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	if (clko_clocks[i]->set_rate && clko_clocks[i]->round_rate) {
+		clk->set_rate = _clk_parent_set_rate;
+		clk->round_rate = _clk_parent_round_rate;
+	} else {
+		clk->set_rate = NULL;
+		clk->round_rate = NULL;
+	}
+
+	return 0;
+}
+
+static struct clk clko_clk = {
+	.set_parent = clko_set_parent,
+};
+
+static struct clk dma_clk = {
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_DMA_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk csi_clk = {
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_CSI_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk mma_clk = {
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_MMA_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk usbd_clk = {
+	.parent = &clk48m,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+	.enable = _clk_enable,
+	.enable_reg = SCM_GCCR,
+	.enable_shift = SCM_GCCR_USBD_CLK_EN_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk gpt_clk = {
+	.parent = &perclk[0],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk uart_clk = {
+	.parent = &perclk[0],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk i2c_clk = {
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk spi_clk = {
+	.parent = &perclk[1],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk sdhc_clk = {
+	.parent = &perclk[1],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk lcdc_clk = {
+	.parent = &perclk[1],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk mshc_clk = {
+	.parent = &hclk,
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk ssi_clk = {
+	.parent = &perclk[2],
+	.round_rate = _clk_parent_round_rate,
+	.set_rate = _clk_parent_set_rate,
+};
+
+static struct clk rtc_clk = {
+	.parent = &clk32,
+};
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK(NULL, "dma", dma_clk)
+	_REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK(NULL, "mma", mma_clk)
+	_REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk)
+	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi_clk)
+	_REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
+};
+
+int __init mx1_clocks_init(unsigned long fref)
+{
+	unsigned int reg;
+
+	/* disable clocks we are able to */
+	__raw_writel(0, SCM_GCCR);
+
+	clk32_rate = fref;
+	reg = __raw_readl(CCM_CSCR);
+
+	/* detect clock reference for system PLL */
+	if (reg & CCM_CSCR_SYSTEM_SEL) {
+		prem_clk.parent = &clk16m;
+	} else {
+		/* ensure that oscillator is disabled */
+		reg &= ~(1 << CCM_CSCR_OSC_EN_SHIFT);
+		__raw_writel(reg, CCM_CSCR);
+		prem_clk.parent = &clk32_premult;
+	}
+
+	/* detect reference for CLKO */
+	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
+	clko_clk.parent = (struct clk *)clko_clocks[reg];
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	clk_enable(&hclk);
+	clk_enable(&fclk);
+
+	mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+			MX1_TIM1_INT);
+
+	return 0;
+}
diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c
new file mode 100644
index 000000000000..cf15ea516a72
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx21.c
@@ -0,0 +1,1239 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_PRESC_OFFSET	29
+#define CCM_CSCR_PRESC_MASK	(0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << CCM_CSCR_USB_OFFSET)
+#define CCM_CSCR_SD_OFFSET	24
+#define CCM_CSCR_SD_MASK	(0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES	(1 << 22)
+#define CCM_CSCR_MPLLRES	(1 << 21)
+#define CCM_CSCR_SSI2_OFFSET	20
+#define CCM_CSCR_SSI2		(1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET	19
+#define CCM_CSCR_SSI1		(1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET	18
+#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
+#define CCM_CSCR_SP		(1 << 17)
+#define CCM_CSCR_MCU		(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET	9
+#define CCM_CSCR_IPDIV		(1 << CCM_CSCR_IPDIV_OFFSET)
+
+#define CCM_CSCR_OSC26MDIV	(1 << 4)
+#define CCM_CSCR_OSC26M		(1 << 3)
+#define CCM_CSCR_FPM		(1 << 2)
+#define CCM_CSCR_SPEN		(1 << 1)
+#define CCM_CSCR_MPEN		1
+
+#define CCM_MPCTL0_CPLM		(1 << 31)
+#define CCM_MPCTL0_PD_OFFSET	26
+#define CCM_MPCTL0_PD_MASK	(0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET	16
+#define CCM_MPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET	10
+#define CCM_MPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET	0
+#define CCM_MPCTL0_MFN_MASK	0x3ff
+
+#define CCM_MPCTL1_LF		(1 << 15)
+#define CCM_MPCTL1_BRMO		(1 << 6)
+
+#define CCM_SPCTL0_CPLM		(1 << 31)
+#define CCM_SPCTL0_PD_OFFSET	26
+#define CCM_SPCTL0_PD_MASK	(0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET	16
+#define CCM_SPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET	10
+#define CCM_SPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET	0
+#define CCM_SPCTL0_MFN_MASK	0x3ff
+
+#define CCM_SPCTL1_LF		(1 << 15)
+#define CCM_SPCTL1_BRMO		(1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET	16
+#define CCM_OSC26MCTL_PEAK_MASK		(0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET	8
+#define CCM_OSC26MCTL_AGC_MASK		(0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET	0
+#define CCM_OSC26MCTL_ANATEST_MASK	0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET	26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK	(0x3f << 26)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET	16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK	(0x3f << 16)
+#define CCM_PCDR0_NFCDIV_OFFSET		12
+#define CCM_PCDR0_NFCDIV_MASK		(0xf << 12)
+#define CCM_PCDR0_48MDIV_OFFSET		5
+#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET	0
+#define CCM_PCDR0_FIRIDIV_MASK		0x1f
+#define CCM_PCDR1_PERDIV4_OFFSET	24
+#define CCM_PCDR1_PERDIV4_MASK		(0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET	16
+#define CCM_PCDR1_PERDIV3_MASK		(0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET	8
+#define CCM_PCDR1_PERDIV2_MASK		(0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET	0
+#define CCM_PCDR1_PERDIV1_MASK		0x3f
+
+#define CCM_PCCR_HCLK_CSI_OFFSET	31
+#define CCM_PCCR_HCLK_CSI_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET	30
+#define CCM_PCCR_HCLK_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET	28
+#define CCM_PCCR_HCLK_BROM_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET	27
+#define CCM_PCCR_HCLK_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET	26
+#define CCM_PCCR_HCLK_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET	25
+#define CCM_PCCR_HCLK_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET	24
+#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET	23
+#define CCM_PCCR_BMI_MASK		(1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG		CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET		22
+#define CCM_PCCR_PERCLK4_REG		CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET		21
+#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET	20
+#define CCM_PCCR_FIRI_BAUD_MASK		(1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET		19
+#define CCM_PCCR_NFC_REG		CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET		18
+#define CCM_PCCR_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET	17
+#define CCM_PCCR_SSI1_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET	16
+#define CCM_PCCR_SSI2_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET		15
+#define CCM_PCCR_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET		14
+#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET		13
+#define CCM_PCCR_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET		12
+#define CCM_PCCR_I2C1_REG		CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET		11
+#define CCM_PCCR_GPIO_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET		10
+#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET		9
+#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET		8
+#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET	7
+#define CCM_PCCR_SSI2_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET	6
+#define CCM_PCCR_SSI1_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET		5
+#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET		4
+#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET		3
+#define CCM_PCCR_UART4_REG		CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET		2
+#define CCM_PCCR_UART3_REG		CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET		1
+#define CCM_PCCR_UART2_REG		CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET		0
+#define CCM_PCCR_UART1_REG		CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET		31
+#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET		30
+#define CCM_PCCR_KPP_REG		CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET		29
+#define CCM_PCCR_RTC_REG		CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET		28
+#define CCM_PCCR_PWM_REG		CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET		27
+#define CCM_PCCR_GPT3_REG		CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET		26
+#define CCM_PCCR_GPT2_REG		CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET		25
+#define CCM_PCCR_GPT1_REG		CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET		24
+#define CCM_PCCR_WDT_REG		CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET		23
+#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK		(1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK		(1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK		(1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK		(1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK		(1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK		(1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK		(1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK		(1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK		(1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK		(1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK		(1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK		(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK		(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK		(1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK		(1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK		(1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK		(1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK		(1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK		(1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK		(1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK		(1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK		(1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK		(1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK		(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK		(1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK		(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK		(1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK		(1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK		(1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK		(1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK		(1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK		(1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK		(1 << CCM_PCCR_WDT_OFFSET)
+
+#define CCM_CCSR_32KSR		(1 << 15)
+
+#define CCM_CCSR_CLKMODE1	(1 << 9)
+#define CCM_CCSR_CLKMODE0	(1 << 8)
+
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK	0x1f
+
+#define SYS_FMCR		0x14	/* Functional Muxing Control Reg */
+#define SYS_CHIP_ID		0x00	/* The offset of CHIP ID register */
+
+static int _clk_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+	return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long _clk_generic_round_rate(struct clk *clk,
+			unsigned long rate,
+			u32 max_divisor)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > max_divisor)
+		div = max_divisor;
+
+	return parent_rate / div;
+}
+
+static int _clk_spll_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg |= CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+
+	while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
+		;
+	return 0;
+}
+
+static void _clk_spll_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+}
+
+
+#define CSCR() (__raw_readl(CCM_CSCR))
+#define PCDR0() (__raw_readl(CCM_PCDR0))
+#define PCDR1() (__raw_readl(CCM_PCDR1))
+
+static unsigned long _clk_perclkx_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	return _clk_generic_round_rate(clk, rate, 64);
+}
+
+static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return -EINVAL;
+
+	div = parent_rate / rate;
+	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg =
+	    __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
+				       (clk->id << 3));
+	reg |= div << (clk->id << 3);
+	__raw_writel(reg, CCM_PCDR1);
+
+	return 0;
+}
+
+static unsigned long _clk_usb_recalc(struct clk *clk)
+{
+	unsigned long usb_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
+
+	return parent_rate / (usb_pdf + 1U);
+}
+
+static unsigned long _clk_usb_round_rate(struct clk *clk,
+					     unsigned long rate)
+{
+	return _clk_generic_round_rate(clk, rate, 8);
+}
+
+static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = CSCR() & ~CCM_CSCR_USB_MASK;
+	reg |= div << CCM_CSCR_USB_OFFSET;
+	__raw_writel(reg, CCM_CSCR);
+
+	return 0;
+}
+
+static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
+{
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
+
+	return 2UL * parent_rate / pdf;
+}
+
+static unsigned long _clk_ssi1_recalc(struct clk *clk)
+{
+	return _clk_ssix_recalc(clk,
+		(PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
+		>> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_ssi2_recalc(struct clk *clk)
+{
+	return _clk_ssix_recalc(clk,
+		(PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
+		CCM_PCDR0_SSI2BAUDDIV_OFFSET);
+}
+
+static unsigned long _clk_nfc_recalc(struct clk *clk)
+{
+	unsigned long nfc_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
+		>> CCM_PCDR0_NFCDIV_OFFSET;
+
+	return parent_rate / (nfc_pdf + 1);
+}
+
+static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->round_rate(clk->parent, rate);
+}
+
+static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->set_rate(clk->parent, rate);
+}
+
+static unsigned long external_high_reference; /* in Hz */
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz.
+ */
+static struct clk ckih_clk = {
+	.get_rate = get_high_reference_clock_rate,
+};
+
+static unsigned long external_low_reference; /* in Hz */
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz.
+ */
+static struct clk ckil_clk = {
+	.get_rate = get_low_reference_clock_rate,
+};
+
+
+static unsigned long _clk_fpm_recalc(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) * 512;
+}
+
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+	.parent = &ckil_clk,
+	.get_rate = _clk_fpm_recalc,
+};
+
+static unsigned long get_mpll_clk(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long ref_clk;
+	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+	unsigned long long temp;
+
+	ref_clk = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_MPCTL0);
+	pdf = (reg & CCM_MPCTL0_PD_MASK)  >> CCM_MPCTL0_PD_OFFSET;
+	mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
+	mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
+	mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
+
+	mfi = (mfi <= 5) ? 5 : mfi;
+	temp = 2LL * ref_clk * mfn;
+	do_div(temp, mfd + 1);
+	temp = 2LL * ref_clk * mfi + temp;
+	do_div(temp, pdf + 1);
+
+	return (unsigned long)temp;
+}
+
+static struct clk mpll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_mpll_clk,
+};
+
+static unsigned long _clk_fclk_get_rate(struct clk *clk)
+{
+	unsigned long parent_rate;
+	u32 div;
+
+	div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
+	parent_rate = clk_get_rate(clk->parent);
+
+	return parent_rate / (div+1);
+}
+
+static struct clk fclk_clk = {
+	.parent = &mpll_clk,
+	.get_rate = _clk_fclk_get_rate
+};
+
+static unsigned long get_spll_clk(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long ref_clk;
+	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
+	unsigned long long temp;
+
+	ref_clk = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_SPCTL0);
+	pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
+	mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
+	mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
+	mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
+
+	mfi = (mfi <= 5) ? 5 : mfi;
+	temp = 2LL * ref_clk * mfn;
+	do_div(temp, mfd + 1);
+	temp = 2LL * ref_clk * mfi + temp;
+	do_div(temp, pdf + 1);
+
+	return (unsigned long)temp;
+}
+
+static struct clk spll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_spll_clk,
+	.enable = _clk_spll_enable,
+	.disable = _clk_spll_disable,
+};
+
+static unsigned long get_hclk_clk(struct clk *clk)
+{
+	unsigned long rate;
+	unsigned long bclk_pdf;
+
+	bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
+		>> CCM_CSCR_BCLK_OFFSET;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (bclk_pdf + 1);
+}
+
+static struct clk hclk_clk = {
+	.parent = &fclk_clk,
+	.get_rate = get_hclk_clk,
+};
+
+static unsigned long get_ipg_clk(struct clk *clk)
+{
+	unsigned long rate;
+	unsigned long ipg_pdf;
+
+	ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (ipg_pdf + 1);
+}
+
+static struct clk ipg_clk = {
+	.parent = &hclk_clk,
+	.get_rate = get_ipg_clk,
+};
+
+static unsigned long _clk_perclkx_recalc(struct clk *clk)
+{
+	unsigned long perclk_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return 0;
+
+	perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
+
+	return parent_rate / (perclk_pdf + 1);
+}
+
+static struct clk per_clk[] = {
+	{
+		.id = 0,
+		.parent = &mpll_clk,
+		.get_rate = _clk_perclkx_recalc,
+	}, {
+		.id = 1,
+		.parent = &mpll_clk,
+		.get_rate = _clk_perclkx_recalc,
+	}, {
+		.id = 2,
+		.parent = &mpll_clk,
+		.round_rate = _clk_perclkx_round_rate,
+		.set_rate = _clk_perclkx_set_rate,
+		.get_rate = _clk_perclkx_recalc,
+		/* Enable/Disable done via lcd_clkc[1] */
+	}, {
+		.id = 3,
+		.parent = &mpll_clk,
+		.round_rate = _clk_perclkx_round_rate,
+		.set_rate = _clk_perclkx_set_rate,
+		.get_rate = _clk_perclkx_recalc,
+		/* Enable/Disable done via csi_clk[1] */
+	},
+};
+
+static struct clk uart_ipg_clk[];
+
+static struct clk uart_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[2],
+	}, {
+		.id = 3,
+		.parent = &per_clk[0],
+		.secondary = &uart_ipg_clk[3],
+	},
+};
+
+static struct clk uart_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART1_REG,
+		.enable_shift = CCM_PCCR_UART1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART2_REG,
+		.enable_shift = CCM_PCCR_UART2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART3_REG,
+		.enable_shift = CCM_PCCR_UART3_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 3,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_UART4_REG,
+		.enable_shift = CCM_PCCR_UART4_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk gpt_ipg_clk[];
+
+static struct clk gpt_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[0],
+		.secondary = &gpt_ipg_clk[2],
+	},
+};
+
+static struct clk gpt_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT1_REG,
+		.enable_shift = CCM_PCCR_GPT1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT2_REG,
+		.enable_shift = CCM_PCCR_GPT2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 2,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_GPT3_REG,
+		.enable_shift = CCM_PCCR_GPT3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk pwm_clk[] = {
+	{
+		.parent = &per_clk[0],
+		.secondary = &pwm_clk[1],
+	}, {
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_PWM_REG,
+		.enable_shift = CCM_PCCR_PWM_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk sdhc_ipg_clk[];
+
+static struct clk sdhc_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[1],
+		.secondary = &sdhc_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[1],
+		.secondary = &sdhc_ipg_clk[1],
+	},
+};
+
+static struct clk sdhc_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SDHC1_REG,
+		.enable_shift = CCM_PCCR_SDHC1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SDHC2_REG,
+		.enable_shift = CCM_PCCR_SDHC2_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk cspi_ipg_clk[];
+
+static struct clk cspi_clk[] = {
+	{
+		.id = 0,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[0],
+	}, {
+		.id = 1,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[1],
+	}, {
+		.id = 2,
+		.parent = &per_clk[1],
+		.secondary = &cspi_ipg_clk[2],
+	},
+};
+
+static struct clk cspi_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI1_REG,
+		.enable_shift = CCM_PCCR_CSPI1_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI2_REG,
+		.enable_shift = CCM_PCCR_CSPI2_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 3,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_CSPI3_REG,
+		.enable_shift = CCM_PCCR_CSPI3_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk lcdc_clk[] = {
+	{
+		.parent = &per_clk[2],
+		.secondary = &lcdc_clk[1],
+		.round_rate = _clk_parent_round_rate,
+		.set_rate = _clk_parent_set_rate,
+	}, {
+		.parent = &ipg_clk,
+		.secondary = &lcdc_clk[2],
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_LCDC_REG,
+		.enable_shift = CCM_PCCR_LCDC_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_LCDC_REG,
+		.enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk csi_clk[] = {
+	{
+		.parent = &per_clk[3],
+		.secondary = &csi_clk[1],
+		.round_rate = _clk_parent_round_rate,
+		.set_rate = _clk_parent_set_rate,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_CSI_REG,
+		.enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk usb_clk[] = {
+	{
+		.parent = &spll_clk,
+		.secondary = &usb_clk[1],
+		.get_rate = _clk_usb_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_USBOTG_REG,
+		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
+		.disable = _clk_disable,
+		.round_rate = _clk_usb_round_rate,
+		.set_rate = _clk_usb_set_rate,
+	}, {
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
+		.enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk ssi_ipg_clk[];
+
+static struct clk ssi_clk[] = {
+	{
+		.id = 0,
+		.parent = &mpll_clk,
+		.secondary = &ssi_ipg_clk[0],
+		.get_rate = _clk_ssi1_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI1_BAUD_REG,
+		.enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &mpll_clk,
+		.secondary = &ssi_ipg_clk[1],
+		.get_rate = _clk_ssi2_recalc,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI2_BAUD_REG,
+		.enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk ssi_ipg_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI1_REG,
+		.enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
+		.disable = _clk_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SSI2_REG,
+		.enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+
+static struct clk nfc_clk = {
+	.parent = &fclk_clk,
+	.get_rate = _clk_nfc_recalc,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_NFC_REG,
+	.enable_shift = CCM_PCCR_NFC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk dma_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_DMA_REG,
+		.enable_shift = CCM_PCCR_DMA_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &dma_clk[1],
+	},  {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_DMA_REG,
+		.enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
+		.disable = _clk_disable,
+	},
+};
+
+static struct clk brom_clk = {
+	.parent = &hclk_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_HCLK_BROM_REG,
+	.enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk emma_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_EMMA_REG,
+		.enable_shift = CCM_PCCR_EMMA_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &emma_clk[1],
+	}, {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_EMMA_REG,
+		.enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk slcdc_clk[] = {
+	{
+		.parent = &hclk_clk,
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_SLCDC_REG,
+		.enable_shift = CCM_PCCR_SLCDC_OFFSET,
+		.disable = _clk_disable,
+		.secondary = &slcdc_clk[1],
+	}, {
+		.enable = _clk_enable,
+		.enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
+		.enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
+		.disable = _clk_disable,
+	}
+};
+
+static struct clk wdog_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_WDT_REG,
+	.enable_shift = CCM_PCCR_WDT_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk gpio_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_GPIO_REG,
+	.enable_shift = CCM_PCCR_GPIO_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk i2c_clk = {
+	.id = 0,
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_I2C1_REG,
+	.enable_shift = CCM_PCCR_I2C1_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk kpp_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_KPP_REG,
+	.enable_shift = CCM_PCCR_KPP_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk owire_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_OWIRE_REG,
+	.enable_shift = CCM_PCCR_OWIRE_OFFSET,
+	.disable = _clk_disable,
+};
+
+static struct clk rtc_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_enable,
+	.enable_reg = CCM_PCCR_RTC_REG,
+	.enable_shift = CCM_PCCR_RTC_OFFSET,
+	.disable = _clk_disable,
+};
+
+static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
+{
+	return _clk_generic_round_rate(clk, rate, 8);
+}
+
+static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = __raw_readl(CCM_PCDR0);
+
+	if (clk->parent == &usb_clk[0]) {
+		reg &= ~CCM_PCDR0_48MDIV_MASK;
+		reg |= div << CCM_PCDR0_48MDIV_OFFSET;
+	}
+	__raw_writel(reg, CCM_PCDR0);
+
+	return 0;
+}
+
+static unsigned long _clk_clko_recalc(struct clk *clk)
+{
+	u32 div = 0;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->parent == &usb_clk[0]) /* 48M */
+		div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
+			 >> CCM_PCDR0_48MDIV_OFFSET;
+	div++;
+
+	return parent_rate / div;
+}
+
+static struct clk clko_clk;
+
+static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
+
+	if (parent == &ckil_clk)
+		reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &fpm_clk)
+		reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ckih_clk)
+		reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == mpll_clk.parent)
+		reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == spll_clk.parent)
+		reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &mpll_clk)
+		reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &spll_clk)
+		reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &fclk_clk)
+		reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &hclk_clk)
+		reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ipg_clk)
+		reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[0])
+		reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[1])
+		reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[2])
+		reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &per_clk[3])
+		reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ssi_clk[0])
+		reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &ssi_clk[1])
+		reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &nfc_clk)
+		reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &usb_clk[0])
+		reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
+	else if (parent == &clko_clk)
+		reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
+	else
+		return -EINVAL;
+
+	__raw_writel(reg, CCM_CCSR);
+
+	return 0;
+}
+
+static struct clk clko_clk = {
+	.get_rate = _clk_clko_recalc,
+	.set_rate = _clk_clko_set_rate,
+	.round_rate = _clk_clko_round_rate,
+	.set_parent = _clk_clko_set_parent,
+};
+
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+static struct clk_lookup lookups[] = {
+/* It's unlikely that any driver wants one of them directly:
+	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
+	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
+	_REGISTER_CLOCK(NULL, "fpm", fpm_clk)
+	_REGISTER_CLOCK(NULL, "mpll", mpll_clk)
+	_REGISTER_CLOCK(NULL, "spll", spll_clk)
+	_REGISTER_CLOCK(NULL, "fclk", fclk_clk)
+	_REGISTER_CLOCK(NULL, "hclk", hclk_clk)
+	_REGISTER_CLOCK(NULL, "ipg", ipg_clk)
+*/
+	_REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
+	_REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
+	_REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
+	_REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
+	_REGISTER_CLOCK(NULL, "clko", clko_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
+	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
+	_REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
+	_REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
+	_REGISTER_CLOCK("imx21-cspi.0", NULL, cspi_clk[0])
+	_REGISTER_CLOCK("imx21-cspi.1", NULL, cspi_clk[1])
+	_REGISTER_CLOCK("imx21-cspi.2", NULL, cspi_clk[2])
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
+	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
+	_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
+	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
+	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
+	_REGISTER_CLOCK(NULL, "brom", brom_clk)
+	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
+	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK(NULL, "owire", owire_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+};
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+	u32 cscr;
+
+	external_low_reference = lref;
+	external_high_reference = href;
+
+	/* detect clock reference for both system PLL */
+	cscr = CSCR();
+	if (cscr & CCM_CSCR_MCU)
+		mpll_clk.parent = &ckih_clk;
+	else
+		mpll_clk.parent = &fpm_clk;
+
+	if (cscr & CCM_CSCR_SP)
+		spll_clk.parent = &ckih_clk;
+	else
+		spll_clk.parent = &fpm_clk;
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	/* Turn off all clock gates */
+	__raw_writel(0, CCM_PCCR0);
+	__raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
+
+	/* This turns of the serial PLL as well */
+	spll_clk.disable(&spll_clk);
+
+	/* This will propagate to all children and init all the clock rates. */
+	clk_enable(&per_clk[0]);
+	clk_enable(&gpio_clk);
+
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+	clk_enable(&uart_clk[0]);
+#endif
+
+	mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+			MX21_INT_GPT1);
+	return 0;
+}
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
new file mode 100644
index 000000000000..98a25bada783
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -0,0 +1,763 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_UPDATE_DIS	(1 << 31)
+#define CCM_CSCR_SSI2		(1 << 23)
+#define CCM_CSCR_SSI1		(1 << 22)
+#define CCM_CSCR_VPU		(1 << 21)
+#define CCM_CSCR_MSHC           (1 << 20)
+#define CCM_CSCR_SPLLRES        (1 << 19)
+#define CCM_CSCR_MPLLRES        (1 << 18)
+#define CCM_CSCR_SP             (1 << 17)
+#define CCM_CSCR_MCU            (1 << 16)
+#define CCM_CSCR_OSC26MDIV      (1 << 4)
+#define CCM_CSCR_OSC26M         (1 << 3)
+#define CCM_CSCR_FPM            (1 << 2)
+#define CCM_CSCR_SPEN           (1 << 1)
+#define CCM_CSCR_MPEN           (1 << 0)
+
+/* i.MX27 TO 2+ */
+#define CCM_CSCR_ARM_SRC        (1 << 15)
+
+#define CCM_SPCTL1_LF           (1 << 15)
+#define CCM_SPCTL1_BRMO         (1 << 6)
+
+static struct clk mpll_main1_clk, mpll_main2_clk;
+
+static int clk_pccr_enable(struct clk *clk)
+{
+	unsigned long reg;
+
+	if (!clk->enable_reg)
+		return 0;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void clk_pccr_disable(struct clk *clk)
+{
+	unsigned long reg;
+
+	if (!clk->enable_reg)
+		return;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int clk_spll_enable(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg |= CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+
+	while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
+
+	return 0;
+}
+
+static void clk_spll_disable(struct clk *clk)
+{
+	unsigned long reg;
+
+	reg = __raw_readl(CCM_CSCR);
+	reg &= ~CCM_CSCR_SPEN;
+	__raw_writel(reg, CCM_CSCR);
+}
+
+static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
+{
+	int cscr = __raw_readl(CCM_CSCR);
+
+	if (clk->parent == parent)
+		return 0;
+
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		if (parent == &mpll_main1_clk) {
+			cscr |= CCM_CSCR_ARM_SRC;
+		} else {
+			if (parent == &mpll_main2_clk)
+				cscr &= ~CCM_CSCR_ARM_SRC;
+			else
+				return -EINVAL;
+		}
+		__raw_writel(cscr, CCM_CSCR);
+		clk->parent = parent;
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
+{
+	int div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > 4)
+		div = 4;
+
+	return parent_rate / div;
+}
+
+static int set_rate_cpu(struct clk *clk, unsigned long rate)
+{
+	unsigned int div;
+	uint32_t reg;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+
+	if (div > 4 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+
+	div--;
+
+	reg = __raw_readl(CCM_CSCR);
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		reg &= ~(3 << 12);
+		reg |= div << 12;
+		reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
+		__raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
+	} else {
+		printk(KERN_ERR "Can't set CPU frequency!\n");
+	}
+
+	return 0;
+}
+
+static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
+{
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	div = parent_rate / rate;
+	if (parent_rate % rate)
+		div++;
+
+	if (div > 64)
+		div = 64;
+
+	return parent_rate / div;
+}
+
+static int set_rate_per(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+	u32 div;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return -EINVAL;
+
+	div = parent_rate / rate;
+	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
+		return -EINVAL;
+	div--;
+
+	reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
+	reg |= div << (clk->id << 3);
+	__raw_writel(reg, CCM_PCDR1);
+
+	return 0;
+}
+
+static unsigned long get_rate_usb(struct clk *clk)
+{
+	unsigned long usb_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
+
+	return parent_rate / (usb_pdf + 1U);
+}
+
+static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
+{
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		pdf += 4;  /* MX27 TO2+ */
+	else
+		pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
+
+	return 2UL * parent_rate / pdf;
+}
+
+static unsigned long get_rate_ssi1(struct clk *clk)
+{
+	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
+}
+
+static unsigned long get_rate_ssi2(struct clk *clk)
+{
+	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	unsigned long nfc_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
+	else
+		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
+
+	return parent_rate / (nfc_pdf + 1);
+}
+
+static unsigned long get_rate_vpu(struct clk *clk)
+{
+	unsigned long vpu_pdf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
+		vpu_pdf += 4;
+	} else {
+		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
+		vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
+	}
+
+	return 2UL * parent_rate / vpu_pdf;
+}
+
+static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->round_rate(clk->parent, rate);
+}
+
+static unsigned long get_rate_parent(struct clk *clk)
+{
+	return clk_get_rate(clk->parent);
+}
+
+static int set_rate_parent(struct clk *clk, unsigned long rate)
+{
+	return clk->parent->set_rate(clk->parent, rate);
+}
+
+/* in Hz */
+static unsigned long external_high_reference = 26000000;
+
+static unsigned long get_rate_high_reference(struct clk *clk)
+{
+	return external_high_reference;
+}
+
+/* in Hz */
+static unsigned long external_low_reference = 32768;
+
+static unsigned long get_rate_low_reference(struct clk *clk)
+{
+	return external_low_reference;
+}
+
+static unsigned long get_rate_fpm(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) * 1024;
+}
+
+static unsigned long get_rate_mpll(struct clk *clk)
+{
+	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
+			clk_get_rate(clk->parent));
+}
+
+static unsigned long get_rate_mpll_main(struct clk *clk)
+{
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	/* i.MX27 TO2:
+	 * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
+	 * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
+	 */
+	if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
+		return 2UL * parent_rate / 3UL;
+
+	return parent_rate;
+}
+
+static unsigned long get_rate_spll(struct clk *clk)
+{
+	uint32_t reg;
+	unsigned long rate;
+
+	rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(CCM_SPCTL0);
+
+	/* On TO2 we have to write the value back. Otherwise we
+	 * read 0 from this register the next time.
+	 */
+	if (mx27_revision() >= CHIP_REV_2_0)
+		__raw_writel(reg, CCM_SPCTL0);
+
+	return mxc_decode_pll(reg, rate);
+}
+
+static unsigned long get_rate_cpu(struct clk *clk)
+{
+	u32 div;
+	unsigned long rate;
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
+	else
+		div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (div + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+	unsigned long rate, bclk_pdf;
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
+	else
+		bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (bclk_pdf + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+	unsigned long rate, ipg_pdf;
+
+	if (mx27_revision() >= CHIP_REV_2_0)
+		return clk_get_rate(clk->parent);
+	else
+		ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
+
+	rate = clk_get_rate(clk->parent);
+	return rate / (ipg_pdf + 1);
+}
+
+static unsigned long get_rate_per(struct clk *clk)
+{
+	unsigned long perclk_pdf, parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->id < 0 || clk->id > 3)
+		return 0;
+
+	perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
+
+	return parent_rate / (perclk_pdf + 1);
+}
+
+/*
+ * the high frequency external clock reference
+ * Default case is 26MHz. Could be changed at runtime
+ * with a call to change_external_high_reference()
+ */
+static struct clk ckih_clk = {
+	.get_rate	= get_rate_high_reference,
+};
+
+static struct clk mpll_clk = {
+	.parent		= &ckih_clk,
+	.get_rate	= get_rate_mpll,
+};
+
+/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
+ * It provides the clock source whose rate is same as MPLL
+ */
+static struct clk mpll_main1_clk = {
+	.id		= 0,
+	.parent		= &mpll_clk,
+	.get_rate	= get_rate_mpll_main,
+};
+
+/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
+ * It provides the clock source whose rate is same MPLL * 2 / 3
+ */
+static struct clk mpll_main2_clk = {
+	.id		= 1,
+	.parent		= &mpll_clk,
+	.get_rate	= get_rate_mpll_main,
+};
+
+static struct clk ahb_clk = {
+	.parent		= &mpll_main2_clk,
+	.get_rate	= get_rate_ahb,
+};
+
+static struct clk ipg_clk = {
+	.parent		= &ahb_clk,
+	.get_rate	= get_rate_ipg,
+};
+
+static struct clk cpu_clk = {
+	.parent = &mpll_main2_clk,
+	.set_parent = clk_cpu_set_parent,
+	.round_rate = round_rate_cpu,
+	.get_rate = get_rate_cpu,
+	.set_rate = set_rate_cpu,
+};
+
+static struct clk spll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = get_rate_spll,
+	.enable = clk_spll_enable,
+	.disable = clk_spll_disable,
+};
+
+/*
+ * the low frequency external clock reference
+ * Default case is 32.768kHz.
+ */
+static struct clk ckil_clk = {
+	.get_rate = get_rate_low_reference,
+};
+
+/* Output of frequency pre multiplier */
+static struct clk fpm_clk = {
+	.parent = &ckil_clk,
+	.get_rate = get_rate_fpm,
+};
+
+#define PCCR0 CCM_PCCR0
+#define PCCR1 CCM_PCCR1
+
+#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.enable		= clk_pccr_enable,	\
+		.disable	= clk_pccr_disable,	\
+		.secondary	= s,			\
+		.parent		= p,			\
+	}
+
+#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
+	static struct clk name = {				\
+		.id		= i,				\
+		.enable_reg	= er,				\
+		.enable_shift	= es,				\
+		.get_rate	= get_rate_##getsetround,	\
+		.set_rate	= set_rate_##getsetround,	\
+		.round_rate	= round_rate_##getsetround,	\
+		.enable		= clk_pccr_enable,		\
+		.disable	= clk_pccr_disable,		\
+		.secondary	= s,				\
+		.parent		= p,				\
+	}
+
+/* Forward declaration to keep the following list in order */
+static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
+		  dma_clk1, lcdc_clk2, vpu_clk1;
+
+/* All clocks we can gate through PCCRx in the order of PCCRx bits */
+DEFINE_CLOCK(ssi2_clk1,    1, PCCR0,  0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ssi1_clk1,    0, PCCR0,  1, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(slcdc_clk,    0, PCCR0,  2, NULL, &slcdc_clk1, &ahb_clk);
+DEFINE_CLOCK(sdhc3_clk1,   0, PCCR0,  3, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc2_clk1,   0, PCCR0,  4, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sdhc1_clk1,   0, PCCR0,  5, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(scc_clk,      0, PCCR0,  6, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(sahara2_clk,  0, PCCR0,  7, NULL, &sahara2_clk1, &ahb_clk);
+DEFINE_CLOCK(rtic_clk,     0, PCCR0,  8, NULL, &rtic_clk1, &ahb_clk);
+DEFINE_CLOCK(rtc_clk,      0, PCCR0,  9, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pwm_clk1,     0, PCCR0, 11, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(owire_clk,    0, PCCR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(mstick_clk1,  0, PCCR0, 13, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(lcdc_clk1,    0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
+DEFINE_CLOCK(kpp_clk,      0, PCCR0, 15, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(iim_clk,      0, PCCR0, 16, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c2_clk,     1, PCCR0, 17, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(i2c1_clk,     0, PCCR0, 18, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt6_clk1,    0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt5_clk1,    0, PCCR0, 20, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt4_clk1,    0, PCCR0, 21, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt3_clk1,    0, PCCR0, 22, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt2_clk1,    0, PCCR0, 23, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpt1_clk1,    0, PCCR0, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(gpio_clk,     0, PCCR0, 25, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(fec_clk,      0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
+DEFINE_CLOCK(emma_clk,     0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
+DEFINE_CLOCK(dma_clk,      0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
+DEFINE_CLOCK(cspi13_clk1,  0, PCCR0, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi2_clk1,   0, PCCR0, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(cspi1_clk1,   0, PCCR0, 31, NULL, NULL, &ipg_clk);
+
+DEFINE_CLOCK(mstick_clk,   0, PCCR1,  2, NULL, &mstick_clk1, &ipg_clk);
+DEFINE_CLOCK(nfc_clk,      0, PCCR1,  3, get_rate_nfc, NULL, &cpu_clk);
+DEFINE_CLOCK(ssi2_clk,     1, PCCR1,  4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(ssi1_clk,     0, PCCR1,  5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
+DEFINE_CLOCK(vpu_clk,      0, PCCR1,  6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
+DEFINE_CLOCK1(per4_clk,    3, PCCR1,  7, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per3_clk,    2, PCCR1,  8, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per2_clk,    1, PCCR1,  9, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK1(per1_clk,    0, PCCR1, 10, per, NULL, &mpll_main2_clk);
+DEFINE_CLOCK(usb_clk1,     0, PCCR1, 11, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(slcdc_clk1,   0, PCCR1, 12, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(rtic_clk1,    0, PCCR1, 14, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(lcdc_clk2,    0, PCCR1, 15, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(vpu_clk1,     0, PCCR1, 16, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(fec_clk1,     0, PCCR1, 17, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emma_clk1,    0, PCCR1, 18, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(emi_clk,      0, PCCR1, 19, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(dma_clk1,     0, PCCR1, 20, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(csi_clk1,     0, PCCR1, 21, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(brom_clk,     0, PCCR1, 22, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(ata_clk,      0, PCCR1, 23, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(wdog_clk,     0, PCCR1, 24, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(usb_clk,      0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
+DEFINE_CLOCK(uart6_clk1,   0, PCCR1, 26, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart5_clk1,   0, PCCR1, 27, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart4_clk1,   0, PCCR1, 28, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart3_clk1,   0, PCCR1, 29, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart2_clk1,   0, PCCR1, 30, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(uart1_clk1,   0, PCCR1, 31, NULL, NULL, &ipg_clk);
+
+/* Clocks we cannot directly gate, but drivers need their rates */
+DEFINE_CLOCK(cspi1_clk,    0, NULL,   0, NULL, &cspi1_clk1, &per2_clk);
+DEFINE_CLOCK(cspi2_clk,    1, NULL,   0, NULL, &cspi2_clk1, &per2_clk);
+DEFINE_CLOCK(cspi3_clk,    2, NULL,   0, NULL, &cspi13_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc1_clk,    0, NULL,   0, NULL, &sdhc1_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc2_clk,    1, NULL,   0, NULL, &sdhc2_clk1, &per2_clk);
+DEFINE_CLOCK(sdhc3_clk,    2, NULL,   0, NULL, &sdhc3_clk1, &per2_clk);
+DEFINE_CLOCK(pwm_clk,      0, NULL,   0, NULL, &pwm_clk1, &per1_clk);
+DEFINE_CLOCK(gpt1_clk,     0, NULL,   0, NULL, &gpt1_clk1, &per1_clk);
+DEFINE_CLOCK(gpt2_clk,     1, NULL,   0, NULL, &gpt2_clk1, &per1_clk);
+DEFINE_CLOCK(gpt3_clk,     2, NULL,   0, NULL, &gpt3_clk1, &per1_clk);
+DEFINE_CLOCK(gpt4_clk,     3, NULL,   0, NULL, &gpt4_clk1, &per1_clk);
+DEFINE_CLOCK(gpt5_clk,     4, NULL,   0, NULL, &gpt5_clk1, &per1_clk);
+DEFINE_CLOCK(gpt6_clk,     5, NULL,   0, NULL, &gpt6_clk1, &per1_clk);
+DEFINE_CLOCK(uart1_clk,    0, NULL,   0, NULL, &uart1_clk1, &per1_clk);
+DEFINE_CLOCK(uart2_clk,    1, NULL,   0, NULL, &uart2_clk1, &per1_clk);
+DEFINE_CLOCK(uart3_clk,    2, NULL,   0, NULL, &uart3_clk1, &per1_clk);
+DEFINE_CLOCK(uart4_clk,    3, NULL,   0, NULL, &uart4_clk1, &per1_clk);
+DEFINE_CLOCK(uart5_clk,    4, NULL,   0, NULL, &uart5_clk1, &per1_clk);
+DEFINE_CLOCK(uart6_clk,    5, NULL,   0, NULL, &uart6_clk1, &per1_clk);
+DEFINE_CLOCK1(lcdc_clk,    0, NULL,   0, parent, &lcdc_clk1, &per3_clk);
+DEFINE_CLOCK1(csi_clk,     0, NULL,   0, parent, &csi_clk1, &per4_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk)
+	_REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
+	_REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
+	_REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
+	_REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
+	_REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
+	_REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
+	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
+	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
+	_REGISTER_CLOCK("imx27-cspi.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("imx27-cspi.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("imx27-cspi.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
+	_REGISTER_CLOCK(NULL, "dma", dma_clk)
+	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
+	_REGISTER_CLOCK(NULL, "brom", brom_clk)
+	_REGISTER_CLOCK(NULL, "emma", emma_clk)
+	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
+	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
+	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
+	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
+	_REGISTER_CLOCK(NULL, "scc", scc_clk)
+};
+
+/* Adjust the clock path for TO2 and later */
+static void __init to2_adjust_clocks(void)
+{
+	unsigned long cscr = __raw_readl(CCM_CSCR);
+
+	if (mx27_revision() >= CHIP_REV_2_0) {
+		if (cscr & CCM_CSCR_ARM_SRC)
+			cpu_clk.parent = &mpll_main1_clk;
+
+		if (!(cscr & CCM_CSCR_SSI2))
+			ssi1_clk.parent = &spll_clk;
+
+		if (!(cscr & CCM_CSCR_SSI1))
+			ssi1_clk.parent = &spll_clk;
+
+		if (!(cscr & CCM_CSCR_VPU))
+			vpu_clk.parent = &spll_clk;
+	} else {
+		cpu_clk.parent = &mpll_clk;
+		cpu_clk.set_parent = NULL;
+		cpu_clk.round_rate = NULL;
+		cpu_clk.set_rate = NULL;
+		ahb_clk.parent = &mpll_clk;
+
+		per1_clk.parent = &mpll_clk;
+		per2_clk.parent = &mpll_clk;
+		per3_clk.parent = &mpll_clk;
+		per4_clk.parent = &mpll_clk;
+
+		ssi1_clk.parent = &mpll_clk;
+		ssi2_clk.parent = &mpll_clk;
+
+		vpu_clk.parent = &mpll_clk;
+	}
+}
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx27_clocks_init(unsigned long fref)
+{
+	u32 cscr = __raw_readl(CCM_CSCR);
+
+	external_high_reference = fref;
+
+	/* detect clock reference for both system PLLs */
+	if (cscr & CCM_CSCR_MCU)
+		mpll_clk.parent = &ckih_clk;
+	else
+		mpll_clk.parent = &fpm_clk;
+
+	if (cscr & CCM_CSCR_SP)
+		spll_clk.parent = &ckih_clk;
+	else
+		spll_clk.parent = &fpm_clk;
+
+	to2_adjust_clocks();
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	/* Turn off all clocks we do not need */
+	__raw_writel(0, CCM_PCCR0);
+	__raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
+
+	spll_clk.disable(&spll_clk);
+
+	/* enable basic clocks */
+	clk_enable(&per1_clk);
+	clk_enable(&gpio_clk);
+	clk_enable(&emi_clk);
+	clk_enable(&iim_clk);
+
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+	clk_enable(&uart1_clk);
+#endif
+
+	mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+			MX27_INT_GPT1);
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index d8d3b2d84dc5..d8d3b2d84dc5 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
new file mode 100644
index 000000000000..81979486218e
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx1.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx1.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst;
+#define imx1_add_imx_i2c(pdata)		\
+	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
+
+extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst;
+#define imx1_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
+#define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
+#define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
new file mode 100644
index 000000000000..d189039749b0
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx21.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst;
+#define imx21_add_imx_i2c(pdata)	\
+	imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
+
+extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst;
+#define imx21_add_imx_ssi(id, pdata)	\
+	imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
+#define imx21_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata)
+#define imx21_add_imx_uart0(pdata)	imx21_add_imx_uart(0, pdata)
+#define imx21_add_imx_uart1(pdata)	imx21_add_imx_uart(1, pdata)
+#define imx21_add_imx_uart2(pdata)	imx21_add_imx_uart(2, pdata)
+#define imx21_add_imx_uart3(pdata)	imx21_add_imx_uart(3, pdata)
+
+extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst;
+#define imx21_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst;
+#define imx21_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx21_cspi_data[id], pdata)
+#define imx21_add_spi_imx0(pdata)	imx21_add_cspi(0, pdata)
+#define imx21_add_spi_imx1(pdata)	imx21_add_cspi(1, pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
new file mode 100644
index 000000000000..7011690364f2
--- /dev/null
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx27.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fec_data imx27_fec_data __initconst;
+#define imx27_add_fec(pdata)	\
+	imx_add_fec(&imx27_fec_data, pdata)
+
+extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst;
+#define imx27_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
+
+extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst;
+#define imx27_add_imx_ssi(id, pdata)    \
+	imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
+#define imx27_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata)
+#define imx27_add_imx_uart0(pdata)	imx27_add_imx_uart(0, pdata)
+#define imx27_add_imx_uart1(pdata)	imx27_add_imx_uart(1, pdata)
+#define imx27_add_imx_uart2(pdata)	imx27_add_imx_uart(2, pdata)
+#define imx27_add_imx_uart3(pdata)	imx27_add_imx_uart(3, pdata)
+#define imx27_add_imx_uart4(pdata)	imx27_add_imx_uart(4, pdata)
+#define imx27_add_imx_uart5(pdata)	imx27_add_imx_uart(5, pdata)
+
+extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst;
+#define imx27_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst;
+#define imx27_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx27_cspi_data[id], pdata)
+#define imx27_add_spi_imx0(pdata)	imx27_add_cspi(0, pdata)
+#define imx27_add_spi_imx1(pdata)	imx27_add_cspi(1, pdata)
+#define imx27_add_spi_imx2(pdata)	imx27_add_cspi(2, pdata)
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
new file mode 100644
index 000000000000..fba5047de8b1
--- /dev/null
+++ b/arch/arm/mach-imx/devices.c
@@ -0,0 +1,553 @@
+/*
+ * Author: MontaVista Software, Inc.
+ *       <source@mvista.com>
+ *
+ * Based on the OMAP devices.c
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+#if defined(CONFIG_ARCH_MX1)
+static struct resource imx1_camera_resources[] = {
+	{
+		.start  = 0x00224000,
+		.end    = 0x00224010,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_CSI_INT,
+		.end    = MX1_CSI_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device imx1_camera_device = {
+	.name           = "mx1-camera",
+	.id             = 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask = &imx1_camera_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.resource       = imx1_camera_resources,
+	.num_resources  = ARRAY_SIZE(imx1_camera_resources),
+};
+
+static struct resource imx_rtc_resources[] = {
+	{
+		.start  = 0x00204000,
+		.end    = 0x00204024,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_RTC_INT,
+		.end    = MX1_RTC_INT,
+		.flags  = IORESOURCE_IRQ,
+	}, {
+		.start  = MX1_RTC_SAMINT,
+		.end    = MX1_RTC_SAMINT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_rtc_device = {
+	.name           = "rtc-imx",
+	.id             = 0,
+	.resource       = imx_rtc_resources,
+	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
+};
+
+static struct resource imx_wdt_resources[] = {
+	{
+		.start  = 0x00201000,
+		.end    = 0x00201008,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = MX1_WDT_INT,
+		.end    = MX1_WDT_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_wdt_device = {
+	.name           = "imx-wdt",
+	.id             = 0,
+	.resource       = imx_wdt_resources,
+	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
+};
+
+static struct resource imx_usb_resources[] = {
+	{
+		.start	= 0x00212000,
+		.end	= 0x00212148,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX1_USBD_INT0,
+		.end	= MX1_USBD_INT0,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT1,
+		.end	= MX1_USBD_INT1,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT2,
+		.end	= MX1_USBD_INT2,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT3,
+		.end	= MX1_USBD_INT3,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT4,
+		.end	= MX1_USBD_INT4,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT5,
+		.end	= MX1_USBD_INT5,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= MX1_USBD_INT6,
+		.end	= MX1_USBD_INT6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_usb_device = {
+	.name		= "imx_udc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(imx_usb_resources),
+	.resource	= imx_usb_resources,
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	{
+		.chip.label = "gpio-0",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
+		.irq = MX1_GPIO_INT_PORTA,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
+		.chip.label = "gpio-1",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
+		.irq = MX1_GPIO_INT_PORTB,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
+		.chip.label = "gpio-2",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
+		.irq = MX1_GPIO_INT_PORTC,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
+		.chip.label = "gpio-3",
+		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
+		.irq = MX1_GPIO_INT_PORTD,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+	}
+};
+
+int __init imx1_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+#endif
+
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mx27_camera_resources[] = {
+	{
+	       .start = MX27_CSI_BASE_ADDR,
+	       .end = MX27_CSI_BASE_ADDR + 0x1f,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MX27_EMMA_PRP_BASE_ADDR,
+	       .end = MX27_EMMA_PRP_BASE_ADDR + 0x1f,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MX27_INT_CSI,
+	       .end = MX27_INT_CSI,
+	       .flags = IORESOURCE_IRQ,
+	},{
+	       .start = MX27_INT_EMMAPRP,
+	       .end = MX27_INT_EMMAPRP,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+struct platform_device mx27_camera_device = {
+	.name = "mx2-camera",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mx27_camera_resources),
+	.resource = mx27_camera_resources,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+#endif
+
+/*
+ * General Purpose Timer
+ * - i.MX21: 3 timers
+ * - i.MX27: 6 timers
+ */
+#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq)				\
+	static struct resource timer ## n ##_resources[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}							\
+	};								\
+									\
+	struct platform_device mxc_gpt ## n = {				\
+		.name = "imx_gpt",					\
+		.id = n,						\
+		.num_resources = ARRAY_SIZE(timer ## n ## _resources),	\
+		.resource = timer ## n ## _resources,			\
+	}
+
+/* We use gpt1 as system timer, so do not add a device for this one */
+DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
+DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
+DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
+DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
+#endif
+
+/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
+static struct resource mxc_wdt_resources[] = {
+	{
+		.start = MX2x_WDOG_BASE_ADDR,
+		.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_wdt = {
+	.name = "imx2-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
+	.resource = mxc_wdt_resources,
+};
+
+static struct resource mxc_w1_master_resources[] = {
+	{
+		.start = MX2x_OWIRE_BASE_ADDR,
+		.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_w1_master_device = {
+	.name = "mxc_w1",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
+	.resource = mxc_w1_master_resources,
+};
+
+/*
+ * lcdc:
+ * - i.MX1: the basic controller
+ * - i.MX21: to be checked
+ * - i.MX27: like i.MX1, with slightly variations
+ */
+static struct resource mxc_fb[] = {
+	{
+		.start = MX2x_LCDC_BASE_ADDR,
+		.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX2x_INT_LCDC,
+		.end = MX2x_INT_LCDC,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* mxc lcd driver */
+struct platform_device mxc_fb_device = {
+	.name = "imx-fb",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_fb),
+	.resource = mxc_fb,
+	.dev = {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource mxc_pwm_resources[] = {
+	{
+		.start = MX2x_PWM_BASE_ADDR,
+		.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX2x_INT_PWM,
+		.end = MX2x_INT_PWM,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device = {
+	.name = "mxc_pwm",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
+	.resource = mxc_pwm_resources,
+};
+
+#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq)			\
+	static struct resource mxc_sdhc_resources ## n[] = {		\
+		{							\
+			.start = baseaddr,				\
+			.end = baseaddr + SZ_4K - 1,			\
+			.flags = IORESOURCE_MEM,			\
+		}, {							\
+			.start = irq,					\
+			.end = irq,					\
+			.flags = IORESOURCE_IRQ,			\
+		}, {							\
+			.start = dmareq,				\
+			.end = dmareq,					\
+			.flags = IORESOURCE_DMA,			\
+		},							\
+	};								\
+									\
+	static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32);	\
+									\
+	struct platform_device mxc_sdhc_device ## n = {			\
+		.name = "mxc-mmc",					\
+		.id = n,						\
+		.dev = {						\
+			.dma_mask = &mxc_sdhc ## n ## _dmamask,		\
+			.coherent_dma_mask = DMA_BIT_MASK(32),		\
+		},							\
+		.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n),	\
+		.resource = mxc_sdhc_resources ## n,		\
+	}
+
+DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
+DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
+
+#ifdef CONFIG_MACH_MX27
+static struct resource otg_resources[] = {
+	{
+		.start = MX27_USBOTG_BASE_ADDR,
+		.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX27_INT_USB3,
+		.end = MX27_INT_USB3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = MX27_USBOTG_BASE_ADDR + 0x200,
+		.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX27_INT_USB1,
+		.end = MX27_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = MX27_USBOTG_BASE_ADDR + 0x400,
+		.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MX27_INT_USB2,
+		.end = MX27_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+#endif
+
+/* GPIO port description */
+#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.irq = _irq,						\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
+	}
+
+#define DEFINE_MXC_GPIO_PORT(SOC, n)					\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
+	}
+
+#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)					\
+	static struct mxc_gpio_port pfx ## _gpio_ports[] = {		\
+		DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),	\
+		DEFINE_MXC_GPIO_PORT(SOC, 1),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 2),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 3),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 4),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 5),				\
+	}
+
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+
+int __init imx21_register_gpios(void)
+{
+	return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+}
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_GPIO_PORTS(MX27, imx27);
+
+int __init imx27_register_gpios(void)
+{
+	return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
+}
+#endif
+
+#ifdef CONFIG_MACH_MX21
+static struct resource mx21_usbhc_resources[] = {
+	{
+		.start	= MX21_USBOTG_BASE_ADDR,
+		.end	= MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start		= MX21_INT_USBHOST,
+		.end		= MX21_INT_USBHOST,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx21_usbhc_device = {
+	.name		= "imx21-hcd",
+	.id		= 0,
+	.dev		= {
+		.dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(mx21_usbhc_resources),
+	.resource	= mx21_usbhc_resources,
+};
+#endif
+
+static struct resource imx_kpp_resources[] = {
+	{
+		.start  = MX2x_KPP_BASE_ADDR,
+		.end    = MX2x_KPP_BASE_ADDR + 0xf,
+		.flags  = IORESOURCE_MEM
+	}, {
+		.start  = MX2x_INT_KPP,
+		.end    = MX2x_INT_KPP,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_kpp_device = {
+	.name = "imx-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(imx_kpp_resources),
+	.resource = imx_kpp_resources,
+};
+
+#endif
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
new file mode 100644
index 000000000000..807f02a031c9
--- /dev/null
+++ b/arch/arm/mach-imx/devices.h
@@ -0,0 +1,29 @@
+#ifdef CONFIG_ARCH_MX1
+extern struct platform_device imx1_camera_device;
+extern struct platform_device imx_rtc_device;
+extern struct platform_device imx_wdt_device;
+extern struct platform_device imx_usb_device;
+#endif
+
+#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
+extern struct platform_device mxc_gpt1;
+extern struct platform_device mxc_gpt2;
+#ifdef CONFIG_MACH_MX27
+extern struct platform_device mxc_gpt3;
+extern struct platform_device mxc_gpt4;
+extern struct platform_device mxc_gpt5;
+#endif
+extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_w1_master_device;
+extern struct platform_device mxc_fb_device;
+extern struct platform_device mxc_pwm_device;
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mx27_camera_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mx21_usbhc_device;
+extern struct platform_device imx_kpp_device;
+#endif
diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c
new file mode 100644
index 000000000000..3e8c47c63bac
--- /dev/null
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -0,0 +1,862 @@
+/*
+ *  linux/arch/arm/plat-mxc/dma-v1.c
+ *
+ *  i.MX DMA registration and IRQ dispatching
+ *
+ * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
+ * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <mach/dma-v1.h>
+
+#define DMA_DCR     0x00		/* Control Register */
+#define DMA_DISR    0x04		/* Interrupt status Register */
+#define DMA_DIMR    0x08		/* Interrupt mask Register */
+#define DMA_DBTOSR  0x0c		/* Burst timeout status Register */
+#define DMA_DRTOSR  0x10		/* Request timeout Register */
+#define DMA_DSESR   0x14		/* Transfer Error Status Register */
+#define DMA_DBOSR   0x18		/* Buffer overflow status Register */
+#define DMA_DBTOCR  0x1c		/* Burst timeout control Register */
+#define DMA_WSRA    0x40		/* W-Size Register A */
+#define DMA_XSRA    0x44		/* X-Size Register A */
+#define DMA_YSRA    0x48		/* Y-Size Register A */
+#define DMA_WSRB    0x4c		/* W-Size Register B */
+#define DMA_XSRB    0x50		/* X-Size Register B */
+#define DMA_YSRB    0x54		/* Y-Size Register B */
+#define DMA_SAR(x)  (0x80 + ((x) << 6))	/* Source Address Registers */
+#define DMA_DAR(x)  (0x84 + ((x) << 6))	/* Destination Address Registers */
+#define DMA_CNTR(x) (0x88 + ((x) << 6))	/* Count Registers */
+#define DMA_CCR(x)  (0x8c + ((x) << 6))	/* Control Registers */
+#define DMA_RSSR(x) (0x90 + ((x) << 6))	/* Request source select Registers */
+#define DMA_BLR(x)  (0x94 + ((x) << 6))	/* Burst length Registers */
+#define DMA_RTOR(x) (0x98 + ((x) << 6))	/* Request timeout Registers */
+#define DMA_BUCR(x) (0x98 + ((x) << 6))	/* Bus Utilization Registers */
+#define DMA_CCNR(x) (0x9C + ((x) << 6))	/* Channel counter Registers */
+
+#define DCR_DRST           (1<<1)
+#define DCR_DEN            (1<<0)
+#define DBTOCR_EN          (1<<15)
+#define DBTOCR_CNT(x)      ((x) & 0x7fff)
+#define CNTR_CNT(x)        ((x) & 0xffffff)
+#define CCR_ACRPT          (1<<14)
+#define CCR_DMOD_LINEAR    (0x0 << 12)
+#define CCR_DMOD_2D        (0x1 << 12)
+#define CCR_DMOD_FIFO      (0x2 << 12)
+#define CCR_DMOD_EOBFIFO   (0x3 << 12)
+#define CCR_SMOD_LINEAR    (0x0 << 10)
+#define CCR_SMOD_2D        (0x1 << 10)
+#define CCR_SMOD_FIFO      (0x2 << 10)
+#define CCR_SMOD_EOBFIFO   (0x3 << 10)
+#define CCR_MDIR_DEC       (1<<9)
+#define CCR_MSEL_B         (1<<8)
+#define CCR_DSIZ_32        (0x0 << 6)
+#define CCR_DSIZ_8         (0x1 << 6)
+#define CCR_DSIZ_16        (0x2 << 6)
+#define CCR_SSIZ_32        (0x0 << 4)
+#define CCR_SSIZ_8         (0x1 << 4)
+#define CCR_SSIZ_16        (0x2 << 4)
+#define CCR_REN            (1<<3)
+#define CCR_RPT            (1<<2)
+#define CCR_FRC            (1<<1)
+#define CCR_CEN            (1<<0)
+#define RTOR_EN            (1<<15)
+#define RTOR_CLK           (1<<14)
+#define RTOR_PSC           (1<<13)
+
+/*
+ * struct imx_dma_channel - i.MX specific DMA extension
+ * @name: name specified by DMA client
+ * @irq_handler: client callback for end of transfer
+ * @err_handler: client callback for error condition
+ * @data: clients context data for callbacks
+ * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
+ * @sg: pointer to the actual read/written chunk for scatter-gather emulation
+ * @resbytes: total residual number of bytes to transfer
+ *            (it can be lower or same as sum of SG mapped chunk sizes)
+ * @sgcount: number of chunks to be read/written
+ *
+ * Structure is used for IMX DMA processing. It would be probably good
+ * @struct dma_struct in the future for external interfacing and use
+ * @struct imx_dma_channel only as extension to it.
+ */
+
+struct imx_dma_channel {
+	const char *name;
+	void (*irq_handler) (int, void *);
+	void (*err_handler) (int, void *, int errcode);
+	void (*prog_handler) (int, void *, struct scatterlist *);
+	void *data;
+	unsigned int dma_mode;
+	struct scatterlist *sg;
+	unsigned int resbytes;
+	int dma_num;
+
+	int in_use;
+
+	u32 ccr_from_device;
+	u32 ccr_to_device;
+
+	struct timer_list watchdog;
+
+	int hw_chaining;
+};
+
+static void __iomem *imx_dmav1_baseaddr;
+
+static void imx_dmav1_writel(unsigned val, unsigned offset)
+{
+	__raw_writel(val, imx_dmav1_baseaddr + offset);
+}
+
+static unsigned imx_dmav1_readl(unsigned offset)
+{
+	return __raw_readl(imx_dmav1_baseaddr + offset);
+}
+
+static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
+
+static struct clk *dma_clk;
+
+static int imx_dma_hw_chain(struct imx_dma_channel *imxdma)
+{
+	if (cpu_is_mx27())
+		return imxdma->hw_chaining;
+	else
+		return 0;
+}
+
+/*
+ * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
+ */
+static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long now;
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return 0;
+	}
+
+	now = min(imxdma->resbytes, sg->length);
+	if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP)
+		imxdma->resbytes -= now;
+
+	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
+		imx_dmav1_writel(sg->dma_address, DMA_DAR(channel));
+	else
+		imx_dmav1_writel(sg->dma_address, DMA_SAR(channel));
+
+	imx_dmav1_writel(now, DMA_CNTR(channel));
+
+	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
+		"size 0x%08x\n", channel,
+		 imx_dmav1_readl(DMA_DAR(channel)),
+		 imx_dmav1_readl(DMA_SAR(channel)),
+		 imx_dmav1_readl(DMA_CNTR(channel)));
+
+	return now;
+}
+
+/**
+ * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from
+ * device transfer
+ *
+ * @channel: i.MX DMA channel number
+ * @dma_address: the DMA/physical memory address of the linear data block
+ *		to transfer
+ * @dma_length: length of the data block in bytes
+ * @dev_addr: physical device port address
+ * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
+ *           or %DMA_MODE_WRITE from memory to the device
+ *
+ * Return value: if incorrect parameters are provided -%EINVAL.
+ *		Zero indicates success.
+ */
+int
+imx_dma_setup_single(int channel, dma_addr_t dma_address,
+		     unsigned int dma_length, unsigned int dev_addr,
+		     unsigned int dmamode)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+	imxdma->sg = NULL;
+	imxdma->dma_mode = dmamode;
+
+	if (!dma_address) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if (!dma_length) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
+		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
+			"dev_addr=0x%08x for read\n",
+			channel, __func__, (unsigned int)dma_address,
+			dma_length, dev_addr);
+
+		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+		imx_dmav1_writel(dma_address, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
+	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
+		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
+			"dev_addr=0x%08x for write\n",
+			channel, __func__, (unsigned int)dma_address,
+			dma_length, dev_addr);
+
+		imx_dmav1_writel(dma_address, DMA_SAR(channel));
+		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_to_device,
+				DMA_CCR(channel));
+	} else {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	imx_dmav1_writel(dma_length, DMA_CNTR(channel));
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_single);
+
+/**
+ * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
+ * @channel: i.MX DMA channel number
+ * @sg: pointer to the scatter-gather list/vector
+ * @sgcount: scatter-gather list hungs count
+ * @dma_length: total length of the transfer request in bytes
+ * @dev_addr: physical device port address
+ * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
+ *           or %DMA_MODE_WRITE from memory to the device
+ *
+ * The function sets up DMA channel state and registers to be ready for
+ * transfer specified by provided parameters. The scatter-gather emulation
+ * is set up according to the parameters.
+ *
+ * The full preparation of the transfer requires setup of more register
+ * by the caller before imx_dma_enable() can be called.
+ *
+ * %BLR(channel) holds transfer burst length in bytes, 0 means 64 bytes
+ *
+ * %RSSR(channel) has to be set to the DMA request line source %DMA_REQ_xxx
+ *
+ * %CCR(channel) has to specify transfer parameters, the next settings is
+ * typical for linear or simple scatter-gather transfers if %DMA_MODE_READ is
+ * specified
+ *
+ * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
+ *
+ * The typical setup for %DMA_MODE_WRITE is specified by next options
+ * combination
+ *
+ * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
+ *
+ * Be careful here and do not mistakenly mix source and target device
+ * port sizes constants, they are really different:
+ * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
+ * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
+ *
+ * Return value: if incorrect parameters are provided -%EINVAL.
+ * Zero indicates success.
+ */
+int
+imx_dma_setup_sg(int channel,
+		 struct scatterlist *sg, unsigned int sgcount,
+		 unsigned int dma_length, unsigned int dev_addr,
+		 unsigned int dmamode)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+	if (imxdma->in_use)
+		return -EBUSY;
+
+	imxdma->sg = sg;
+	imxdma->dma_mode = dmamode;
+	imxdma->resbytes = dma_length;
+
+	if (!sg || !sgcount) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg empty sg list\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if (!sg->length) {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
+		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
+			"dev_addr=0x%08x for read\n",
+			channel, __func__, sg, sgcount, dma_length, dev_addr);
+
+		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
+	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
+		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
+			"dev_addr=0x%08x for write\n",
+			channel, __func__, sg, sgcount, dma_length, dev_addr);
+
+		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+		imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel));
+	} else {
+		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
+		       channel);
+		return -EINVAL;
+	}
+
+	imx_dma_sg_next(channel, sg);
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_sg);
+
+int
+imx_dma_config_channel(int channel, unsigned int config_port,
+	unsigned int config_mem, unsigned int dmareq, int hw_chaining)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	u32 dreq = 0;
+
+	imxdma->hw_chaining = 0;
+
+	if (hw_chaining) {
+		imxdma->hw_chaining = 1;
+		if (!imx_dma_hw_chain(imxdma))
+			return -EINVAL;
+	}
+
+	if (dmareq)
+		dreq = CCR_REN;
+
+	imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
+	imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
+
+	imx_dmav1_writel(dmareq, DMA_RSSR(channel));
+
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_config_channel);
+
+void imx_dma_config_burstlen(int channel, unsigned int burstlen)
+{
+	imx_dmav1_writel(burstlen, DMA_BLR(channel));
+}
+EXPORT_SYMBOL(imx_dma_config_burstlen);
+
+/**
+ * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification
+ * handlers
+ * @channel: i.MX DMA channel number
+ * @irq_handler: the pointer to the function called if the transfer
+ *		ends successfully
+ * @err_handler: the pointer to the function called if the premature
+ *		end caused by error occurs
+ * @data: user specified value to be passed to the handlers
+ */
+int
+imx_dma_setup_handlers(int channel,
+		       void (*irq_handler) (int, void *),
+		       void (*err_handler) (int, void *, int),
+		       void *data)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return -ENODEV;
+	}
+
+	local_irq_save(flags);
+	imx_dmav1_writel(1 << channel, DMA_DISR);
+	imxdma->irq_handler = irq_handler;
+	imxdma->err_handler = err_handler;
+	imxdma->data = data;
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_handlers);
+
+/**
+ * imx_dma_setup_progression_handler - setup i.MX DMA channel progression
+ * handlers
+ * @channel: i.MX DMA channel number
+ * @prog_handler: the pointer to the function called if the transfer progresses
+ */
+int
+imx_dma_setup_progression_handler(int channel,
+			void (*prog_handler) (int, void*, struct scatterlist*))
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return -ENODEV;
+	}
+
+	local_irq_save(flags);
+	imxdma->prog_handler = prog_handler;
+	local_irq_restore(flags);
+	return 0;
+}
+EXPORT_SYMBOL(imx_dma_setup_progression_handler);
+
+/**
+ * imx_dma_enable - function to start i.MX DMA channel operation
+ * @channel: i.MX DMA channel number
+ *
+ * The channel has to be allocated by driver through imx_dma_request()
+ * or imx_dma_request_by_prio() function.
+ * The transfer parameters has to be set to the channel registers through
+ * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
+ * and registers %BLR(channel), %RSSR(channel) and %CCR(channel) has to
+ * be set prior this function call by the channel user.
+ */
+void imx_dma_enable(int channel)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	pr_debug("imxdma%d: imx_dma_enable\n", channel);
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
+		       __func__, channel);
+		return;
+	}
+
+	if (imxdma->in_use)
+		return;
+
+	local_irq_save(flags);
+
+	imx_dmav1_writel(1 << channel, DMA_DISR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
+		CCR_ACRPT, DMA_CCR(channel));
+
+#ifdef CONFIG_ARCH_MX2
+	if ((cpu_is_mx21() || cpu_is_mx27()) &&
+			imxdma->sg && imx_dma_hw_chain(imxdma)) {
+		imxdma->sg = sg_next(imxdma->sg);
+		if (imxdma->sg) {
+			u32 tmp;
+			imx_dma_sg_next(channel, imxdma->sg);
+			tmp = imx_dmav1_readl(DMA_CCR(channel));
+			imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT,
+				DMA_CCR(channel));
+		}
+	}
+#endif
+	imxdma->in_use = 1;
+
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_enable);
+
+/**
+ * imx_dma_disable - stop, finish i.MX DMA channel operatin
+ * @channel: i.MX DMA channel number
+ */
+void imx_dma_disable(int channel)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+
+	pr_debug("imxdma%d: imx_dma_disable\n", channel);
+
+	if (imx_dma_hw_chain(imxdma))
+		del_timer(&imxdma->watchdog);
+
+	local_irq_save(flags);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR);
+	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN,
+			DMA_CCR(channel));
+	imx_dmav1_writel(1 << channel, DMA_DISR);
+	imxdma->in_use = 0;
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_disable);
+
+#ifdef CONFIG_ARCH_MX2
+static void imx_dma_watchdog(unsigned long chno)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
+
+	imx_dmav1_writel(0, DMA_CCR(chno));
+	imxdma->in_use = 0;
+	imxdma->sg = NULL;
+
+	if (imxdma->err_handler)
+		imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
+}
+#endif
+
+static irqreturn_t dma_err_handler(int irq, void *dev_id)
+{
+	int i, disr;
+	struct imx_dma_channel *imxdma;
+	unsigned int err_mask;
+	int errcode;
+
+	disr = imx_dmav1_readl(DMA_DISR);
+
+	err_mask = imx_dmav1_readl(DMA_DBTOSR) |
+		   imx_dmav1_readl(DMA_DRTOSR) |
+		   imx_dmav1_readl(DMA_DSESR)  |
+		   imx_dmav1_readl(DMA_DBOSR);
+
+	if (!err_mask)
+		return IRQ_HANDLED;
+
+	imx_dmav1_writel(disr & err_mask, DMA_DISR);
+
+	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+		if (!(err_mask & (1 << i)))
+			continue;
+		imxdma = &imx_dma_channels[i];
+		errcode = 0;
+
+		if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DBTOSR);
+			errcode |= IMX_DMA_ERR_BURST;
+		}
+		if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DRTOSR);
+			errcode |= IMX_DMA_ERR_REQUEST;
+		}
+		if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DSESR);
+			errcode |= IMX_DMA_ERR_TRANSFER;
+		}
+		if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) {
+			imx_dmav1_writel(1 << i, DMA_DBOSR);
+			errcode |= IMX_DMA_ERR_BUFFER;
+		}
+		if (imxdma->name && imxdma->err_handler) {
+			imxdma->err_handler(i, imxdma->data, errcode);
+			continue;
+		}
+
+		imx_dma_channels[i].sg = NULL;
+
+		printk(KERN_WARNING
+		       "DMA timeout on channel %d (%s) -%s%s%s%s\n",
+		       i, imxdma->name,
+		       errcode & IMX_DMA_ERR_BURST ?    " burst" : "",
+		       errcode & IMX_DMA_ERR_REQUEST ?  " request" : "",
+		       errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
+		       errcode & IMX_DMA_ERR_BUFFER ?   " buffer" : "");
+	}
+	return IRQ_HANDLED;
+}
+
+static void dma_irq_handle_channel(int chno)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
+
+	if (!imxdma->name) {
+		/*
+		 * IRQ for an unregistered DMA channel:
+		 * let's clear the interrupts and disable it.
+		 */
+		printk(KERN_WARNING
+		       "spurious IRQ for DMA channel %d\n", chno);
+		return;
+	}
+
+	if (imxdma->sg) {
+		u32 tmp;
+		struct scatterlist *current_sg = imxdma->sg;
+		imxdma->sg = sg_next(imxdma->sg);
+
+		if (imxdma->sg) {
+			imx_dma_sg_next(chno, imxdma->sg);
+
+			tmp = imx_dmav1_readl(DMA_CCR(chno));
+
+			if (imx_dma_hw_chain(imxdma)) {
+				/* FIXME: The timeout should probably be
+				 * configurable
+				 */
+				mod_timer(&imxdma->watchdog,
+					jiffies + msecs_to_jiffies(500));
+
+				tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
+				imx_dmav1_writel(tmp, DMA_CCR(chno));
+			} else {
+				imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno));
+				tmp |= CCR_CEN;
+			}
+
+			imx_dmav1_writel(tmp, DMA_CCR(chno));
+
+			if (imxdma->prog_handler)
+				imxdma->prog_handler(chno, imxdma->data,
+						current_sg);
+
+			return;
+		}
+
+		if (imx_dma_hw_chain(imxdma)) {
+			del_timer(&imxdma->watchdog);
+			return;
+		}
+	}
+
+	imx_dmav1_writel(0, DMA_CCR(chno));
+	imxdma->in_use = 0;
+	if (imxdma->irq_handler)
+		imxdma->irq_handler(chno, imxdma->data);
+}
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id)
+{
+	int i, disr;
+
+#ifdef CONFIG_ARCH_MX2
+	if (cpu_is_mx21() || cpu_is_mx27())
+		dma_err_handler(irq, dev_id);
+#endif
+
+	disr = imx_dmav1_readl(DMA_DISR);
+
+	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
+		     disr);
+
+	imx_dmav1_writel(disr, DMA_DISR);
+	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+		if (disr & (1 << i))
+			dma_irq_handle_channel(i);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * imx_dma_request - request/allocate specified channel number
+ * @channel: i.MX DMA channel number
+ * @name: the driver/caller own non-%NULL identification
+ */
+int imx_dma_request(int channel, const char *name)
+{
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+	unsigned long flags;
+	int ret = 0;
+
+	/* basic sanity checks */
+	if (!name)
+		return -EINVAL;
+
+	if (channel >= IMX_DMA_CHANNELS) {
+		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
+		       __func__, channel);
+		return -EINVAL;
+	}
+
+	local_irq_save(flags);
+	if (imxdma->name) {
+		local_irq_restore(flags);
+		return -EBUSY;
+	}
+	memset(imxdma, 0, sizeof(imxdma));
+	imxdma->name = name;
+	local_irq_restore(flags); /* request_irq() can block */
+
+#ifdef CONFIG_ARCH_MX2
+	if (cpu_is_mx21() || cpu_is_mx27()) {
+		ret = request_irq(MX2x_INT_DMACH0 + channel,
+				dma_irq_handler, 0, "DMA", NULL);
+		if (ret) {
+			imxdma->name = NULL;
+			pr_crit("Can't register IRQ %d for DMA channel %d\n",
+					MX2x_INT_DMACH0 + channel, channel);
+			return ret;
+		}
+		init_timer(&imxdma->watchdog);
+		imxdma->watchdog.function = &imx_dma_watchdog;
+		imxdma->watchdog.data = channel;
+	}
+#endif
+
+	return ret;
+}
+EXPORT_SYMBOL(imx_dma_request);
+
+/**
+ * imx_dma_free - release previously acquired channel
+ * @channel: i.MX DMA channel number
+ */
+void imx_dma_free(int channel)
+{
+	unsigned long flags;
+	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
+
+	if (!imxdma->name) {
+		printk(KERN_CRIT
+		       "%s: trying to free free channel %d\n",
+		       __func__, channel);
+		return;
+	}
+
+	local_irq_save(flags);
+	/* Disable interrupts */
+	imx_dma_disable(channel);
+	imxdma->name = NULL;
+
+#ifdef CONFIG_ARCH_MX2
+	if (cpu_is_mx21() || cpu_is_mx27())
+		free_irq(MX2x_INT_DMACH0 + channel, NULL);
+#endif
+
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(imx_dma_free);
+
+/**
+ * imx_dma_request_by_prio - find and request some of free channels best
+ * suiting requested priority
+ * @channel: i.MX DMA channel number
+ * @name: the driver/caller own non-%NULL identification
+ *
+ * This function tries to find a free channel in the specified priority group
+ * if the priority cannot be achieved it tries to look for free channel
+ * in the higher and then even lower priority groups.
+ *
+ * Return value: If there is no free channel to allocate, -%ENODEV is returned.
+ *               On successful allocation channel is returned.
+ */
+int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio)
+{
+	int i;
+	int best;
+
+	switch (prio) {
+	case (DMA_PRIO_HIGH):
+		best = 8;
+		break;
+	case (DMA_PRIO_MEDIUM):
+		best = 4;
+		break;
+	case (DMA_PRIO_LOW):
+	default:
+		best = 0;
+		break;
+	}
+
+	for (i = best; i < IMX_DMA_CHANNELS; i++)
+		if (!imx_dma_request(i, name))
+			return i;
+
+	for (i = best - 1; i >= 0; i--)
+		if (!imx_dma_request(i, name))
+			return i;
+
+	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL(imx_dma_request_by_prio);
+
+static int __init imx_dma_init(void)
+{
+	int ret = 0;
+	int i;
+
+#ifdef CONFIG_ARCH_MX1
+	if (cpu_is_mx1())
+		imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
+	else
+#endif
+		BUG();
+
+	dma_clk = clk_get(NULL, "dma");
+	clk_enable(dma_clk);
+
+	/* reset DMA module */
+	imx_dmav1_writel(DCR_DRST, DMA_DCR);
+
+#ifdef CONFIG_ARCH_MX1
+	if (cpu_is_mx1()) {
+		ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+		if (ret) {
+			pr_crit("Wow!  Can't register IRQ for DMA\n");
+			return ret;
+		}
+
+		ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL);
+		if (ret) {
+			pr_crit("Wow!  Can't register ERRIRQ for DMA\n");
+			free_irq(MX1_DMA_INT, NULL);
+			return ret;
+		}
+	}
+#endif
+	/* enable DMA module */
+	imx_dmav1_writel(DCR_DEN, DMA_DCR);
+
+	/* clear all interrupts */
+	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR);
+
+	/* disable interrupts */
+	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR);
+
+	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
+		imx_dma_channels[i].sg = NULL;
+		imx_dma_channels[i].dma_num = i;
+	}
+
+	return ret;
+}
+
+arch_initcall(imx_dma_init);
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
new file mode 100644
index 000000000000..026263c665ca
--- /dev/null
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -0,0 +1,392 @@
+/*
+ * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/backlight.h>
+#include <video/platform_lcd.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx27.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/spi.h>
+#include <mach/audmux.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static const int eukrea_mbimx27_pins[] __initconst = {
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART4 */
+#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+#endif
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* SPI1 */
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+	/* SSI4 */
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
+	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
+	PC16_PF_SSI4_FS,
+	PC17_PF_SSI4_RXD | GPIO_PUEN,
+	PC18_PF_SSI4_TXD | GPIO_PUEN,
+	PC19_PF_SSI4_CLK,
+#endif
+};
+
+static const uint32_t eukrea_mbimx27_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+};
+
+static struct matrix_keymap_data eukrea_mbimx27_keymap_data = {
+	.keymap         = eukrea_mbimx27_keymap,
+	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 16,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 19,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+	{
+		.mode = {
+			.name		= "CMO-QVGA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= 156000,
+			.hsync_len	= 30,
+			.left_margin	= 38,
+			.right_margin	= 20,
+			.vsync_len	= 3,
+			.upper_margin	= 15,
+			.lower_margin	= 4,
+		},
+		.pcr		= 0xFAD08B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 32000,
+			.hsync_len	= 1,
+			.left_margin	= 35,
+			.right_margin	= 0,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 0,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-SVGA",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 600,
+			.pixclock	= 25000,
+			.hsync_len	= 1,
+			.left_margin	= 35,
+			.right_margin	= 0,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 0,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+	.mode = eukrea_mbimx27_modes,
+	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static void eukrea_mbimx27_bl_set_intensity(int intensity)
+{
+	if (intensity)
+		gpio_direction_output(GPIO_PORTE | 5, 1);
+	else
+		gpio_direction_output(GPIO_PORTE | 5, 0);
+}
+
+static struct generic_bl_info eukrea_mbimx27_bl_info = {
+	.name			= "eukrea_mbimx27-bl",
+	.max_intensity		= 0xff,
+	.default_intensity	= 0xff,
+	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
+};
+
+static struct platform_device eukrea_mbimx27_bl_dev = {
+	.name			= "generic-bl",
+	.id			= 1,
+	.dev = {
+		.platform_data	= &eukrea_mbimx27_bl_info,
+	},
+};
+
+static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_PORTA | 25, 1);
+	else
+		gpio_direction_output(GPIO_PORTA | 25, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
+	.set_power		= eukrea_mbimx27_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimx27_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+	gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+#endif
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "ads7846",
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 1500000,
+		.irq		= IRQ_GPIOD(25),
+		.platform_data	= &ads7846_config,
+		.mode           = SPI_MODE_2,
+	},
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
+	.chipselect	= eukrea_mbimx27_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&leds_gpio,
+};
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.dat3_card_detect = 1,
+};
+
+static const
+struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
+	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
+	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
+	/* SSI unit master I2S codec connected to SSI_PINS_4*/
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+			MXC_AUDMUX_V1_PCR_SYN |
+			MXC_AUDMUX_V1_PCR_TFSDIR |
+			MXC_AUDMUX_V1_PCR_TCLKDIR |
+			MXC_AUDMUX_V1_PCR_RFSDIR |
+			MXC_AUDMUX_V1_PCR_RCLKDIR |
+			MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
+			MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) |
+			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4)
+	);
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4,
+			MXC_AUDMUX_V1_PCR_SYN |
+			MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0)
+	);
+#endif
+
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+#if !defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	imx27_add_imx_uart3(&uart_pdata);
+#endif
+
+	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+
+	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
+
+	imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	/* ADS7846 Touchscreen controller init */
+	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+	ads7846_dev_init();
+#endif
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	/* SPI_CS0 init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
+	spi_register_board_info(eukrea_mbimx27_spi_board_info,
+			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+#endif
+
+	/* Leds configuration */
+	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+	/* Backlight */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTE | 5, "backlight");
+	platform_device_register(&eukrea_mbimx27_bl_dev);
+	/* LCD Reset */
+	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
+	gpio_request(GPIO_PORTA | 25, "lcd_enable");
+	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
+
+	mxc_register_device(&imx_kpp_device, &eukrea_mbimx27_keymap_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
new file mode 100644
index 000000000000..df5f522da6b3
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
@@ -0,0 +1,10 @@
+#ifndef __MACH_DMA_MX1_MX2_H__
+#define __MACH_DMA_MX1_MX2_H__
+/*
+ * Don't use this header in new code, it will go away when all users are
+ * converted to mach/dma-v1.h
+ */
+
+#include <mach/dma-v1.h>
+
+#endif /* ifndef __MACH_DMA_MX1_MX2_H__ */
diff --git a/arch/arm/mach-imx/include/mach/dma-v1.h b/arch/arm/mach-imx/include/mach/dma-v1.h
new file mode 100644
index 000000000000..ac6fd713828a
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/dma-v1.h
@@ -0,0 +1,103 @@
+/*
+ *  linux/arch/arm/mach-imx/include/mach/dma-v1.h
+ *
+ *  i.MX DMA registration and IRQ dispatching
+ *
+ * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
+ * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
+ * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_DMA_V1_H__
+#define __MACH_DMA_V1_H__
+
+#define imx_has_dma_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
+
+#include <mach/dma.h>
+
+#define IMX_DMA_CHANNELS  16
+
+#define DMA_MODE_READ		0
+#define DMA_MODE_WRITE		1
+#define DMA_MODE_MASK		1
+
+#define MX1_DMA_REG(offset)	MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset))
+
+/* DMA Interrupt Mask Register */
+#define MX1_DMA_DIMR		MX1_DMA_REG(0x08)
+
+/* Channel Control Register */
+#define MX1_DMA_CCR(x)		MX1_DMA_REG(0x8c + ((x) << 6))
+
+#define IMX_DMA_MEMSIZE_32	(0 << 4)
+#define IMX_DMA_MEMSIZE_8	(1 << 4)
+#define IMX_DMA_MEMSIZE_16	(2 << 4)
+#define IMX_DMA_TYPE_LINEAR	(0 << 10)
+#define IMX_DMA_TYPE_2D		(1 << 10)
+#define IMX_DMA_TYPE_FIFO	(2 << 10)
+
+#define IMX_DMA_ERR_BURST     (1 << 0)
+#define IMX_DMA_ERR_REQUEST   (1 << 1)
+#define IMX_DMA_ERR_TRANSFER  (1 << 2)
+#define IMX_DMA_ERR_BUFFER    (1 << 3)
+#define IMX_DMA_ERR_TIMEOUT   (1 << 4)
+
+int
+imx_dma_config_channel(int channel, unsigned int config_port,
+	unsigned int config_mem, unsigned int dmareq, int hw_chaining);
+
+void
+imx_dma_config_burstlen(int channel, unsigned int burstlen);
+
+int
+imx_dma_setup_single(int channel, dma_addr_t dma_address,
+		unsigned int dma_length, unsigned int dev_addr,
+		unsigned int dmamode);
+
+
+/*
+ * Use this flag as the dma_length argument to imx_dma_setup_sg()
+ * to create an endless running dma loop. The end of the scatterlist
+ * must be linked to the beginning for this to work.
+ */
+#define IMX_DMA_LENGTH_LOOP	((unsigned int)-1)
+
+int
+imx_dma_setup_sg(int channel, struct scatterlist *sg,
+		unsigned int sgcount, unsigned int dma_length,
+		unsigned int dev_addr, unsigned int dmamode);
+
+int
+imx_dma_setup_handlers(int channel,
+		void (*irq_handler) (int, void *),
+		void (*err_handler) (int, void *, int), void *data);
+
+int
+imx_dma_setup_progression_handler(int channel,
+		void (*prog_handler) (int, void*, struct scatterlist*));
+
+void imx_dma_enable(int channel);
+
+void imx_dma_disable(int channel);
+
+int imx_dma_request(int channel, const char *name);
+
+void imx_dma_free(int channel);
+
+int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
+
+#endif	/* __MACH_DMA_V1_H__ */
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
new file mode 100644
index 000000000000..745ee60fb068
--- /dev/null
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -0,0 +1,315 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static const int eukrea_cpuimx27_pins[] __initconst = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART4 */
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+#endif
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SDHC2 */
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+#endif
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	/* Quad UART's IRQ */
+	GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+	/* OTG */
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PC9_PF_USBOTG_DATA0,
+	PC10_PF_USBOTG_DATA2,
+	PC11_PF_USBOTG_DATA1,
+	PC12_PF_USBOTG_DATA4,
+	PC13_PF_USBOTG_DATA3,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PE2_PF_USBOTG_DIR,
+	PE24_PF_USBOTG_CLK,
+	PE25_PF_USBOTG_DATA7,
+	/* USBH2 */
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+	.width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc3ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &eukrea_cpuimx27_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct mxc_nand_platform_data
+cpuimx27_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_cpuimx27_nor_mtd_device,
+	&mxc_wdt,
+	&mxc_w1_master_device,
+};
+
+static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
+		.irq = IRQ_GPIOB(23),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
+		.irq = IRQ_GPIOB(22),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
+		.irq = IRQ_GPIOB(27),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
+		.irq = IRQ_GPIOB(30),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+#if defined(CONFIG_USB_ULPI)
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx27_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
+
+static void __init eukrea_cpuimx27_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+	imx27_add_imx_uart0(&uart_pdata);
+
+	imx27_add_mxc_nand(&cpuimx27_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+	imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
+
+	imx27_add_fec(NULL);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	/* SDHC2 can be used for Wifi */
+	mxc_register_device(&mxc_sdhc_device1, NULL);
+#endif
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	/* in which case UART4 is also used for Bluetooth */
+	imx27_add_imx_uart3(&uart_pdata);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	platform_device_register(&serial_device);
+#endif
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+	eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+	.init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = eukrea_cpuimx27_init,
+	.timer          = &eukrea_cpuimx27_timer,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
new file mode 100644
index 000000000000..59716fab586d
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -0,0 +1,261 @@
+/*
+ * mach-imx27_visstrim_m10.c
+ *
+ * Copyright 2010  Javier Martin <javier.martin@vista-silicon.com>
+ *
+ * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mmc.h>
+#include <mach/iomux.h>
+#include <mach/mxc_ehci.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
+#define SDHC1_IRQ IRQ_GPIOB(25)
+
+static const int visstrim_m10_pins[] __initconst = {
+	/* UART1 (console) */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SDHC1 */
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* Both I2Cs */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* USB OTG */
+	OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PC9_PF_USBOTG_DATA0,
+	PC11_PF_USBOTG_DATA1,
+	PC10_PF_USBOTG_DATA2,
+	PC13_PF_USBOTG_DATA3,
+	PC12_PF_USBOTG_DATA4,
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PE25_PF_USBOTG_DATA7,
+	PE24_PF_USBOTG_CLK,
+	PE2_PF_USBOTG_DIR,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PB23_PF_USB_PWR,
+	PB24_PF_USB_OC,
+};
+
+/* GPIOs used as events for applications */
+static struct gpio_keys_button visstrim_gpio_keys[] = {
+	{
+		.type	= EV_KEY,
+		.code	= KEY_RESTART,
+		.gpio	= (GPIO_PORTC + 15),
+		.desc	= "Default config",
+		.active_low = 0,
+		.wakeup = 1,
+	},
+	{
+		.type	= EV_KEY,
+		.code	= KEY_RECORD,
+		.gpio	= (GPIO_PORTF + 14),
+		.desc	= "Record",
+		.active_low = 0,
+		.wakeup = 1,
+	},
+	{
+		.type   = EV_KEY,
+		.code   = KEY_STOP,
+		.gpio   = (GPIO_PORTF + 13),
+		.desc   = "Stop",
+		.active_low = 0,
+		.wakeup = 1,
+	}
+};
+
+static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = {
+	.buttons	= visstrim_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(visstrim_gpio_keys),
+};
+
+static struct platform_device visstrim_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &visstrim_gpio_keys_platform_data,
+	},
+};
+
+/* Visstrim_SM10 has a microSD slot connected to sdhc1 */
+static int visstrim_m10_sdhc1_init(struct device *dev,
+		irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING,
+				"mmc-detect", data);
+	return ret;
+}
+
+static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(SDHC1_IRQ, data);
+}
+
+static struct imxmmc_platform_data visstrim_m10_sdhc_pdata = {
+	.init = visstrim_m10_sdhc1_init,
+	.exit = visstrim_m10_sdhc1_exit,
+};
+
+/* Visstrim_SM10 NOR flash */
+static struct physmap_flash_data visstrim_m10_flash_data = {
+	.width = 2,
+};
+
+static struct resource visstrim_m10_flash_resource = {
+	.start = 0xc0000000,
+	.end = 0xc0000000 + SZ_64M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device visstrim_m10_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &visstrim_m10_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &visstrim_m10_flash_resource,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&visstrim_gpio_keys_device,
+	&visstrim_m10_nor_mtd_device,
+};
+
+/* Visstrim_M10 uses UART0 as console */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* I2C */
+static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
+	.gpio_base = 240, /* After MX27 internal GPIOs */
+	.invert = 0,
+};
+
+static struct i2c_board_info visstrim_m10_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pca9555", 0x20),
+		.platform_data = &visstrim_m10_pca9555_pdata,
+	},
+};
+
+/* USB OTG */
+static int otg_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(OTG_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = {
+	.init = otg_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static void __init visstrim_m10_board_init(void)
+{
+	int ret;
+
+	ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
+			ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
+	if (ret)
+		pr_err("Failed to setup pins (%d)\n", ret);
+
+	imx27_add_imx_uart0(&uart_pdata);
+
+	i2c_register_board_info(0, visstrim_m10_i2c_devices,
+				ARRAY_SIZE(visstrim_m10_i2c_devices));
+	imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
+	imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
+	mxc_register_device(&mxc_sdhc_device0, &visstrim_m10_sdhc_pdata);
+	mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata);
+	imx27_add_fec(NULL);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init visstrim_m10_timer_init(void)
+{
+	mx27_clocks_init((unsigned long)25000000);
+}
+
+static struct sys_timer visstrim_m10_timer = {
+	.init	= visstrim_m10_timer_init,
+};
+
+MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = visstrim_m10_board_init,
+	.timer          = &visstrim_m10_timer,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
new file mode 100644
index 000000000000..bbdbc75127d3
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx27.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static const int mx27lite_pins[] __initconst = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init mx27lite_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
+		"imx27lite");
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_fec(NULL);
+}
+
+static void __init mx27lite_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27lite_timer = {
+	.init	= mx27lite_timer_init,
+};
+
+MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = mx27lite_init,
+	.timer          = &mx27lite_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx1/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 51f3cfd83db2..6187ce9ba7d5 100644
--- a/arch/arm/mach-mx1/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -26,13 +26,13 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx1.h>
 #include <mach/irqs.h>
 
+#include "devices-imx1.h"
 #include "devices.h"
 
-static int mx1ads_pins[] = {
+static const int mx1ads_pins[] __initconst = {
 	/* UART1 */
 	PC9_PF_UART1_CTS,
 	PC10_PF_UART1_RTS,
@@ -58,12 +58,12 @@ static int mx1ads_pins[] = {
  * UARTs platform data
  */
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart0_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+       
+static const struct imxuart_platform_data uart1_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 /*
@@ -75,8 +75,8 @@ static struct physmap_flash_data mx1ads_flash_data = {
 };
 
 static struct resource flash_resource = {
-	.start	= IMX_CS0_PHYS,
-	.end	= IMX_CS0_PHYS + SZ_32M - 1,
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + SZ_32M - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
@@ -98,7 +98,7 @@ static struct pcf857x_platform_data pcf857x_data[] = {
 	}
 };
 
-static struct imxi2c_platform_data mx1ads_i2c_data = {
+static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -121,8 +121,8 @@ static void __init mx1ads_init(void)
 		ARRAY_SIZE(mx1ads_pins), "mx1ads");
 
 	/* UART */
-	mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
-	mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
+	imx1_add_imx_uart0(&uart0_pdata);
+	imx1_add_imx_uart1(&uart1_pdata);
 
 	/* Physmap flash */
 	mxc_register_device(&flash_device, &mx1ads_flash_data);
@@ -131,7 +131,7 @@ static void __init mx1ads_init(void)
 	i2c_register_board_info(0, mx1ads_i2c_devices,
 				ARRAY_SIZE(mx1ads_i2c_devices));
 
-	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+	imx1_add_imx_i2c(&mx1ads_i2c_data);
 }
 
 static void __init mx1ads_timer_init(void)
@@ -145,8 +145,6 @@ struct sys_timer mx1ads_timer = {
 
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
-	.phys_io	= IMX_IO_PHYS,
-	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
@@ -155,8 +153,6 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 MACHINE_END
 
 MACHINE_START(MXLADS, "Freescale MXLADS")
-	.phys_io	= IMX_IO_PHYS,
-	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
diff --git a/arch/arm/mach-mx2/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 113e58d7cb40..e1282e9f50ff 100644
--- a/arch/arm/mach-mx2/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/platform_device.h>
@@ -28,16 +24,50 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/imx-uart.h>
 #include <mach/imxfb.h>
 #include <mach/iomux-mx21.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
-#include <mach/board-mx21ads.h>
 
+#include "devices-imx21.h"
 #include "devices.h"
 
-static unsigned int mx21ads_pins[] = {
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR   0xf5000000
+#define MX21ADS_MMIO_SIZE        SZ_16M
+
+#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
+		(MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP        0x0001 /* read */
+#define MX21ADS_IO_TP6          0x0001 /* write */
+#define MX21ADS_IO_SW_SEL       0x0002 /* read */
+#define MX21ADS_IO_TP7          0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE   0x0008
+#define MX21ADS_IO_CSI_CTL2     0x0010
+#define MX21ADS_IO_CSI_CTL1     0x0020
+#define MX21ADS_IO_CSI_CTL0     0x0040
+#define MX21ADS_IO_UART1_EN     0x0080
+#define MX21ADS_IO_UART4_EN     0x0100
+#define MX21ADS_IO_LCDON        0x0200
+#define MX21ADS_IO_IRDA_EN      0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B   0x1000
+#define MX21ADS_IO_IRDA_MD1     0x2000
+#define MX21ADS_IO_LED4_ON      0x4000
+#define MX21ADS_IO_LED3_ON      0x8000
+
+static const int mx21ads_pins[] __initconst = {
 
 	/* CS8900A */
 	(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
@@ -133,14 +163,13 @@ static struct platform_device mx21ads_nor_mtd_device = {
 	.resource = &mx21ads_flash_resource,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata_rts __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct imxuart_platform_data uart_norts_pdata = {
+static const struct imxuart_platform_data uart_pdata_norts __initconst = {
 };
 
-
 static int mx21ads_fb_init(struct platform_device *pdev)
 {
 	u16 tmp;
@@ -227,7 +256,8 @@ static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
 	.exit = mx21ads_sdhc_exit,
 };
 
-static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx21ads_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -263,12 +293,12 @@ static void __init mx21ads_board_init(void)
 	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
 			"mx21ads");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata);
+	imx21_add_imx_uart0(&uart_pdata_rts);
+	imx21_add_imx_uart2(&uart_pdata_norts);
+	imx21_add_imx_uart3(&uart_pdata_rts);
 	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
-	mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
+	imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
@@ -284,8 +314,6 @@ static struct sys_timer mx21ads_timer = {
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = MX21_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX21_PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
 	.init_irq       = mx21_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
new file mode 100644
index 000000000000..84a5ba03f1ba
--- /dev/null
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This machine is known as:
+ *  - i.MX27 3-Stack Development System
+ *  - i.MX27 Platform Development Kit (i.MX27 PDK)
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mmc.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+#define SD1_EN_GPIO (GPIO_PORTB + 25)
+
+static const int mx27pdk_pins[] __initconst = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SDHC1 */
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/*
+ * Matrix keyboard
+ */
+
+static const uint32_t mx27_3ds_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_ENTER),
+	KEY(2, 0, KEY_F6),
+	KEY(2, 1, KEY_F8),
+	KEY(2, 2, KEY_F9),
+	KEY(2, 3, KEY_F10),
+};
+
+static struct matrix_keymap_data mx27_3ds_keymap_data = {
+	.keymap		= mx27_3ds_keymap,
+	.keymap_size	= ARRAY_SIZE(mx27_3ds_keymap),
+};
+
+static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+				void *data)
+{
+	return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING |
+			IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
+}
+
+static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOB(26), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mx27_3ds_sdhc1_init,
+	.exit = mx27_3ds_sdhc1_exit,
+};
+
+static void mx27_3ds_sdhc1_enable_level_translator(void)
+{
+	/* Turn on TXB0108 OE pin */
+	gpio_request(SD1_EN_GPIO, "sd1_enable");
+	gpio_direction_output(SD1_EN_GPIO, 1);
+}
+
+static void __init mx27pdk_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+		"mx27pdk");
+	mx27_3ds_sdhc1_enable_level_translator();
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_fec(NULL);
+	mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+	.init	= mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+	/* maintainer: Freescale Semiconductor, Inc. */
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = mx27pdk_init,
+	.timer          = &mx27pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 6ce323669e58..a1e4bc573afc 100644
--- a/arch/arm/mach-mx2/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/platform_device.h>
@@ -32,17 +28,45 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
-#include <mach/board-mx27ads.h>
 #include <mach/mxc_nand.h>
-#include <mach/i2c.h>
 #include <mach/imxfb.h>
 #include <mach/mmc.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
-static unsigned int mx27ads_pins[] = {
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS        0xf4300000
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+		(PBC_BASE_ADDRESS + (offset))
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH             0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET      (1 << 3)
+
+static const int mx27ads_pins[] __initconst = {
 	/* UART0 */
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
@@ -141,7 +165,8 @@ static unsigned int mx27ads_pins[] = {
 	PB9_PF_SD2_CLK,
 };
 
-static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx27ads_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -168,7 +193,7 @@ static struct platform_device mx27ads_nor_mtd_device = {
 	.resource = &mx27ads_flash_resource,
 };
 
-static struct imxi2c_platform_data mx27ads_i2c_data = {
+static const struct imxi2c_platform_data mx27ads_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -259,24 +284,11 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 
 static struct platform_device *platform_devices[] __initdata = {
 	&mx27ads_nor_mtd_device,
-	&mxc_fec_device,
 	&mxc_w1_master_device,
 };
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static void __init mx27ads_board_init(void)
@@ -284,22 +296,23 @@ static void __init mx27ads_board_init(void)
 	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
 			"mx27ads");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
-	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
-	mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+	imx27_add_imx_uart3(&uart_pdata);
+	imx27_add_imx_uart4(&uart_pdata);
+	imx27_add_imx_uart5(&uart_pdata);
+	imx27_add_mxc_nand(&mx27ads_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, mx27ads_i2c_devices,
 				ARRAY_SIZE(mx27ads_i2c_devices));
-	mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+	imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
 	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
 
+	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
@@ -334,12 +347,9 @@ static void __init mx27ads_map_io(void)
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27ads_board_init,
 	.timer          = &mx27ads_timer,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx2/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index bc3855992677..38d3a4ae17c7 100644
--- a/arch/arm/mach-mx2/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/platform_device.h>
@@ -32,17 +28,16 @@
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
-#include <mach/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <mach/imxfb.h>
 #include <mach/mmc.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
-static unsigned int mxt_td60_pins[] __initdata = {
+static const int mxt_td60_pins[] __initconst = {
 	/* UART0 */
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
@@ -128,12 +123,13 @@ static unsigned int mxt_td60_pins[] __initdata = {
 	PB9_PF_SD2_CLK,
 };
 
-static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+static const struct mxc_nand_platform_data
+mxt_td60_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
 
-static struct imxi2c_platform_data mxt_td60_i2c_data = {
+static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -173,7 +169,7 @@ static struct i2c_board_info mxt_td60_i2c_devices[] = {
 	},
 };
 
-static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -235,18 +231,8 @@ static struct imxmmc_platform_data sdhc1_pdata = {
 	.exit = mxt_td60_sdhc1_exit,
 };
 
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static void __init mxt_td60_board_init(void)
@@ -254,10 +240,10 @@ static void __init mxt_td60_board_init(void)
 	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
 			"MXT_TD60");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
+	imx27_add_mxc_nand(&mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,
 				ARRAY_SIZE(mxt_td60_i2c_devices));
@@ -265,12 +251,11 @@ static void __init mxt_td60_board_init(void)
 	i2c_register_board_info(1, mxt_td60_i2c2_devices,
 				ARRAY_SIZE(mxt_td60_i2c2_devices));
 
-	mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
-	mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+	imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
+	imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
 	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_fec(NULL);
 }
 
 static void __init mxt_td60_timer_init(void)
@@ -284,8 +269,6 @@ static struct sys_timer mxt_td60_timer = {
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	/* maintainer: Maxtrack Industrial */
-	.phys_io	= MX27_AIPI_BASE_ADDR,
-	.io_pg_offst	= ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= MX27_PHYS_OFFSET + 0x100,
 	.map_io		= mx27_map_io,
 	.init_irq	= mx27_init_irq,
diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index a87422ed4ff5..8c720d44602a 100644
--- a/arch/arm/mach-mx2/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -36,26 +36,25 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
-#include <mach/i2c.h>
 #include <asm/mach/time.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
-#include <mach/imx-uart.h>
 #include <mach/audmux.h>
-#include <mach/ssi.h>
 #include <mach/mxc_nand.h>
 #include <mach/irqs.h>
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
+#include <mach/imxfb.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
 #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
 #define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
+#define SPI1_SS0 (GPIO_PORTD + 28)
+#define SPI1_SS1 (GPIO_PORTD + 27)
+#define SD2_CD (GPIO_PORTC + 29)
 
-static int pca100_pins[] = {
+static const int pca100_pins[] __initconst = {
 	/* UART1 */
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
@@ -68,6 +67,7 @@ static int pca100_pins[] = {
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
+	SD2_CD | GPIO_GPIO | GPIO_IN,
 	/* FEC */
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
@@ -131,24 +131,52 @@ static int pca100_pins[] = {
 	PD23_AF_USBH2_DATA2,
 	PD24_AF_USBH2_DATA1,
 	PD26_AF_USBH2_DATA5,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA26_PF_PS,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA31_PF_OE_ACD,
+	/* free GPIO */
+	GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
+	GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
+	GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data pca100_nand_board_info = {
+static const struct mxc_nand_platform_data
+pca100_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
 
 static struct platform_device *platform_devices[] __initdata = {
 	&mxc_w1_master_device,
-	&mxc_fec_device,
 	&mxc_wdt,
 };
 
-static struct imxi2c_platform_data pca100_i2c_1_data = {
+static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -163,11 +191,9 @@ static struct i2c_board_info pca100_i2c_devices[] = {
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	}, {
 		I2C_BOARD_INFO("lm75", 0x4a),
-		.type = "lm75"
 	}
 };
 
@@ -189,9 +215,9 @@ static struct spi_board_info pca100_spi_board_info[] __initdata = {
 	},
 };
 
-static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1};
 
-static struct spi_imx_master pca100_spi_0_data = {
+static const struct spi_imx_master pca100_spi0_data __initconst = {
 	.chipselect	= pca100_spi_cs,
 	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
 };
@@ -222,7 +248,7 @@ static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
 	msleep(2);
 }
 
-static struct imx_ssi_platform_data pca100_ssi_pdata = {
+static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
 	.ac97_reset		= pca100_ac97_cold_reset,
 	.ac97_warm_reset	= pca100_ac97_warm_reset,
 	.flags			= IMX_SSI_USE_AC97,
@@ -253,6 +279,7 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pca100_sdhc2_exit,
 };
 
+#if defined(CONFIG_USB_ULPI)
 static int otg_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(OTG_PHY_CS_GPIO, 0);
@@ -276,6 +303,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -297,6 +325,45 @@ static int __init pca100_otg_mode(char *options)
 }
 __setup("otg_mode=", pca100_otg_mode);
 
+/* framebuffer info */
+static struct imx_fb_videomode pca100_fb_modes[] = {
+	{
+		.mode = {
+			.name		= "EMERGING-ETV570G0DHU",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39722, /* in ps (25.175 MHz) */
+			.hsync_len	= 30,
+			.left_margin	= 114,
+			.right_margin	= 16,
+			.vsync_len	= 3,
+			.upper_margin	= 32,
+			.lower_margin	= 0,
+		},
+		/*
+		 * TFT
+		 * Pixel pol active high
+		 * HSYNC active low
+		 * VSYNC active low
+		 * use HSYNC for ACD count
+		 * line clock disable while idle
+		 * always enable line clock even if no data
+		 */
+		.pcr = 0xf0c08080,
+		.bpp = 16,
+	},
+};
+
+static struct imx_fb_platform_data pca100_fb_data = {
+	.mode = pca100_fb_modes,
+	.num_modes = ARRAY_SIZE(pca100_fb_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
 static void __init pca100_init(void)
 {
 	int ret;
@@ -318,35 +385,26 @@ static void __init pca100_init(void)
 	if (ret)
 		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
 
-	mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+	imx27_add_imx_ssi(0, &pca100_ssi_pdata);
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx27_add_imx_uart0(&uart_pdata);
 
-	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 
-	mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
+	imx27_add_mxc_nand(&pca100_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pca100_i2c_devices,
 				ARRAY_SIZE(pca100_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
-
-	/* GPIO0_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
-	/* GPIO1_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
-	/* GPIO2_IRQ */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+	imx27_add_imx_i2c(1, &pca100_i2c1_data);
 
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
 	spi_register_board_info(pca100_spi_board_info,
 				ARRAY_SIZE(pca100_spi_board_info));
-	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+	imx27_add_spi_imx0(&pca100_spi0_data);
 #endif
 
 	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
@@ -357,13 +415,13 @@ static void __init pca100_init(void)
 #if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 		mxc_register_device(&mxc_otg_host, &otg_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 #endif
@@ -372,6 +430,9 @@ static void __init pca100_init(void)
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 	}
 
+	mxc_register_device(&mxc_fb_device, &pca100_fb_data);
+
+	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
@@ -385,8 +446,6 @@ static struct sys_timer pca100_timer = {
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-mx2/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 36c89431679a..49a97ce07426 100644
--- a/arch/arm/mach-mx2/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -35,17 +35,15 @@
 #include <mach/board-pcm038.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
 #include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx27.h"
 #include "devices.h"
 
-static int pcm038_pins[] = {
+static const int pcm038_pins[] __initconst = {
 	/* UART1 */
 	PE12_PF_UART1_TXD,
 	PE13_PF_UART1_RXD,
@@ -162,17 +160,12 @@ static struct platform_device pcm038_nor_mtd_device = {
 	.resource = &pcm038_flash_resource,
 };
 
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data pcm038_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm038_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -180,7 +173,6 @@ static struct mxc_nand_platform_data pcm038_nand_board_info = {
 static struct platform_device *platform_devices[] __initdata = {
 	&pcm038_nor_mtd_device,
 	&mxc_w1_master_device,
-	&mxc_fec_device,
 	&pcm038_sram_mtd_device,
 	&mxc_wdt,
 };
@@ -192,7 +184,7 @@ static void __init pcm038_init_sram(void)
 	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
 }
 
-static struct imxi2c_platform_data pcm038_i2c_1_data = {
+static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -215,7 +207,7 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 
 static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
 
-static struct spi_imx_master pcm038_spi_0_data = {
+static const struct spi_imx_master pcm038_spi0_data __initconst = {
 	.chipselect = pcm038_spi_cs,
 	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
 };
@@ -264,7 +256,7 @@ static struct regulator_init_data cam_data = {
 	.consumer_supplies = cam_consumers,
 };
 
-struct mc13783_regulator_init_data pcm038_regulators[] = {
+static struct mc13783_regulator_init_data pcm038_regulators[] = {
 	{
 		.id = MC13783_REGU_VCAM,
 		.init_data = &cam_data,
@@ -305,18 +297,18 @@ static void __init pcm038_init(void)
 
 	pcm038_init_sram();
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	imx27_add_imx_uart0(&uart_pdata);
+	imx27_add_imx_uart1(&uart_pdata);
+	imx27_add_imx_uart2(&uart_pdata);
 
 	mxc_gpio_mode(PE16_AF_OWIRE);
-	mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
+	imx27_add_mxc_nand(&pcm038_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pcm038_i2c_devices,
 				ARRAY_SIZE(pcm038_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
+	imx27_add_imx_i2c(1, &pcm038_i2c1_data);
 
 	/* PE18 for user-LED D40 */
 	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
@@ -326,12 +318,13 @@ static void __init pcm038_init(void)
 	/* MC13783 IRQ */
 	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
 
-	mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+	imx27_add_spi_imx0(&pcm038_spi0_data);
 	spi_register_board_info(pcm038_spi_board_info,
 				ARRAY_SIZE(pcm038_spi_board_info));
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 
+	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -349,8 +342,6 @@ static struct sys_timer pcm038_timer = {
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 7587a7a12460..1fbdd3faa7ab 100644
--- a/arch/arm/mach-mx1/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -22,17 +22,17 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx1.h>
 
+#include "devices-imx1.h"
 #include "devices.h"
 
 /*
  * This scb9328 has a 32MiB flash
  */
 static struct resource flash_resource = {
-	.start	= IMX_CS0_PHYS,
-	.end	= IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+	.start	= MX1_CS0_PHYS,
+	.end	= MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
@@ -70,13 +70,13 @@ static struct dm9000_plat_data dm9000_platdata = {
 static struct resource dm9000x_resources[] = {
 	{
 		.name	= "address area",
-		.start	= IMX_CS5_PHYS,
-		.end	= IMX_CS5_PHYS + 1,
+		.start	= MX1_CS5_PHYS,
+		.end	= MX1_CS5_PHYS + 1,
 		.flags	= IORESOURCE_MEM,	/* address access */
 	}, {
 		.name	= "data area",
-		.start	= IMX_CS5_PHYS + 4,
-		.end	= IMX_CS5_PHYS + 5,
+		.start	= MX1_CS5_PHYS + 4,
+		.end	= MX1_CS5_PHYS + 5,
 		.flags	= IORESOURCE_MEM,	/* data access */
 	}, {
 		.start	= IRQ_GPIOC(3),
@@ -95,7 +95,7 @@ static struct platform_device dm9000x_device = {
 	}
 };
 
-static int mxc_uart1_pins[] = {
+static const int mxc_uart1_pins[] = {
 	PC9_PF_UART1_CTS,
 	PC10_PF_UART1_RTS,
 	PC11_PF_UART1_TXD,
@@ -108,14 +108,13 @@ static int uart1_mxc_init(struct platform_device *pdev)
 			ARRAY_SIZE(mxc_uart1_pins), "UART1");
 }
 
-static int uart1_mxc_exit(struct platform_device *pdev)
+static void uart1_mxc_exit(struct platform_device *pdev)
 {
 	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
 			ARRAY_SIZE(mxc_uart1_pins));
-	return 0;
 }
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.init = uart1_mxc_init,
 	.exit = uart1_mxc_exit,
 	.flags = IMXUART_HAVE_RTSCTS,
@@ -131,7 +130,7 @@ static struct platform_device *devices[] __initdata = {
  */
 static void __init scb9328_init(void)
 {
-	mxc_register_device(&imx_uart1_device, &uart_pdata);
+	imx1_add_imx_uart0(&uart_pdata);
 
 	printk(KERN_INFO"Scb9328: Adding devices\n");
 	platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -148,8 +147,6 @@ static struct sys_timer scb9328_timer = {
 
 MACHINE_START(SCB9328, "Synertronixx scb9328")
     /* Sascha Hauer */
-	.phys_io	= 0x00200000,
-	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
new file mode 100644
index 000000000000..9be92b96dc89
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -0,0 +1,50 @@
+/*
+ *  author: Sascha Hauer
+ *  Created: april 20th, 2004
+ *  Copyright: Synertronixx GmbH
+ *
+ *  Common code for i.MX1 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static struct map_desc imx_io_desc[] __initdata = {
+	{
+		.virtual = MX1_IO_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
+		.length = MX1_IO_SIZE,
+		.type = MT_DEVICE
+	}
+};
+
+void __init mx1_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX1);
+	mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
+
+	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
+}
+
+int imx1_register_gpios(void);
+
+void __init mx1_init_irq(void)
+{
+	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
+	imx1_register_gpios();
+}
diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 64134314d012..12faeeaa0a97 100644
--- a/arch/arm/mach-mx2/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-mx2/mm-imx21.c
+ * arch/arm/mach-imx/mm-imx21.c
  *
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
@@ -77,7 +77,10 @@ void __init mx21_map_io(void)
 	iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
 }
 
+int imx21_register_gpios(void);
+
 void __init mx21_init_irq(void)
 {
 	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
+	imx21_register_gpios();
 }
diff --git a/arch/arm/mach-mx2/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 3366ed44cfd5..a24622957ff2 100644
--- a/arch/arm/mach-mx2/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-mx2/mm-imx27.c
+ * arch/arm/mach-imx/mm-imx27.c
  *
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
@@ -77,7 +77,10 @@ void __init mx27_map_io(void)
 	iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
 }
 
+int imx27_register_gpios(void);
+
 void __init mx27_init_irq(void)
 {
 	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
+	imx27_register_gpios();
 }
diff --git a/arch/arm/mach-mx1/ksym_mx1.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
index b09ee12a4ff0..b09ee12a4ff0 100644
--- a/arch/arm/mach-mx1/ksym_mx1.c
+++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c
diff --git a/arch/arm/mach-mx1/mx1_camera_fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S
index 9c69aa65bf17..9c69aa65bf17 100644
--- a/arch/arm/mach-mx1/mx1_camera_fiq.S
+++ b/arch/arm/mach-imx/mx1-camera-fiq.S
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index f490a406d57e..9110d9cca7a2 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -31,7 +31,7 @@
 
 #include "devices.h"
 
-static int pcm970_pins[] = {
+static const int pcm970_pins[] __initconst = {
 	/* SDHC */
 	PB4_PF_SD2_D0,
 	PB5_PF_SD2_D1,
@@ -200,7 +200,7 @@ static struct resource pcm970_sja1000_resources[] = {
 	},
 };
 
-struct sja1000_platform_data pcm970_sja1000_platform_data = {
+static struct sja1000_platform_data pcm970_sja1000_platform_data = {
 	.osc_freq	= 16000000,
 	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
 	.cdr		= CDR_CBP,
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
new file mode 100644
index 000000000000..afc17ce0bb54
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -0,0 +1,46 @@
+/*
+ * i.MX27 Power Management Routines
+ *
+ * Based on Freescale's BSP
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <mach/system.h>
+#include <mach/mx27.h>
+
+static int mx27_suspend_enter(suspend_state_t state)
+{
+	u32 cscr;
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		/* Clear MPEN and SPEN to disable MPLL/SPLL */
+		cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		cscr &= 0xFFFFFFFC;
+		__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		/* Executes WFI */
+		arch_idle();
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct platform_suspend_ops mx27_suspend_ops = {
+	.enter = mx27_suspend_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+static int __init mx27_pm_init(void)
+{
+	suspend_set_ops(&mx27_suspend_ops);
+	return 0;
+}
+
+device_initcall(mx27_pm_init);
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h
new file mode 100644
index 000000000000..5f96e1518aa9
--- /dev/null
+++ b/arch/arm/mach-integrator/common.h
@@ -0,0 +1 @@
+void integrator_reserve(void);
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index b02cfc06e0ae..8f4fb6d638f7 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -14,6 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/memblock.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/termios.h>
@@ -30,6 +31,7 @@
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
+#include <asm/pgtable.h>
 
 static struct amba_pl010_data integrator_uart_data;
 
@@ -119,8 +121,13 @@ static struct clk uartclk = {
 	.rate	= 14745600,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup lookups[] = {
-	{	/* UART0 */
+	{	/* Bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "mb:16",
 		.clk		= &uartclk,
 	}, {	/* UART1 */
@@ -215,3 +222,13 @@ void cm_control(u32 mask, u32 set)
 }
 
 EXPORT_SYMBOL(cm_control);
+
+/*
+ * We need to stop things allocating the low memory; ideally we need a
+ * better implementation of GFP_DMA which does not assume that DMA-able
+ * memory starts at zero.
+ */
+void __init integrator_reserve(void)
+{
+	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
+}
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index 87a6888ae011..a1f598fd3a56 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,12 +11,10 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x16000000	@ physical base address
-		movne	\rx, #0xf0000000	@ virtual base
-		addne	\rx, \rx, #0x16000000 >> 4
+		.macro	addruart, rp, rv
+		mov	\rp, #0x16000000	@ physical base address
+		mov	\rv, #0xf0000000	@ virtual base
+		add	\rv, \rv, #0x16000000 >> 4
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index 8e26360ce9a3..57f51ba11251 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -32,7 +32,6 @@
 #define IO_SIZE			0x0B000000                 // How much?
 #define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
 
-#define PCIO_BASE		PCI_IO_VADDR
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
 #define pcibios_assign_all_busses()	1
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
index e87ab0b37bdd..e056e7cf5645 100644
--- a/arch/arm/mach-integrator/include/mach/vmalloc.h
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 227cf4d05088..548208f11179 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -48,6 +48,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
+#include "common.h"
+
 /* 
  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  * is the (PA >> 12).
@@ -498,10 +500,9 @@ static struct sys_timer ap_timer = {
 
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= 0x16000000,
-	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ap_map_io,
+	.reserve	= integrator_reserve,
 	.init_irq	= ap_init_irq,
 	.timer		= &ap_timer,
 	.init_machine	= ap_init,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index cde57b2b83b5..6258c90d020c 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -43,6 +43,8 @@
 
 #include <plat/timer-sp.h>
 
+#include "common.h"
+
 #define INTCP_PA_FLASH_BASE		0x24000000
 #define INTCP_FLASH_SIZE		SZ_32M
 
@@ -597,10 +599,9 @@ static struct sys_timer cp_timer = {
 
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= 0x16000000,
-	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= intcp_map_io,
+	.reserve	= integrator_reserve,
 	.init_irq	= intcp_init_irq,
 	.timer		= &cp_timer,
 	.init_machine	= intcp_init,
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index 9cef0590d5aa..6467d99fa2ee 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -505,10 +505,10 @@ void __init pci_v3_preinit(void)
 	/*
 	 * Hook in our fault handler for PCI errors
 	 */
-	hook_fault_code(4, v3_pci_fault, SIGBUS, "external abort on linefetch");
-	hook_fault_code(6, v3_pci_fault, SIGBUS, "external abort on linefetch");
-	hook_fault_code(8, v3_pci_fault, SIGBUS, "external abort on non-linefetch");
-	hook_fault_code(10, v3_pci_fault, SIGBUS, "external abort on non-linefetch");
+	hook_fault_code(4, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
+	hook_fault_code(6, v3_pci_fault, SIGBUS, 0, "external abort on linefetch");
+	hook_fault_code(8, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
+	hook_fault_code(10, v3_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
 
 	spin_lock_irqsave(&v3_lock, flags);
 
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index c9d6ba46963d..e664466d51bf 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,15 +11,13 @@
  * published by the Free Software Foundation.
  */
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1			@ mmu enabled?
-	moveq	\rx, #0xff000000	@ physical
-	orreq	\rx, \rx, #0x00d80000
-	movne	\rx, #0xfe000000	@ virtual
-	orrne	\rx, \rx, #0x00e80000
-	orr	\rx, \rx, #0x00002300
-	orr	\rx, \rx, #0x00000040
+	.macro	addruart, rp, rv
+	mov	\rp, #0x00002300
+	orr	\rp, \rp, #0x00000040
+	orr	\rv, \rp, #0xfe000000	@ virtual
+	orr	\rv, \rv, #0x00e80000
+	orr	\rp, \rp, #0xff000000	@ physical
+	orr	\rp, \rp, #0x00d80000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 25b1da9a5035..7415e4338651 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -69,6 +69,4 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
 
-#define PFN_TO_NID(addr)	(0)
-
 #endif
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index f91f3154577d..9b5a63f5d07d 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -91,8 +91,6 @@ static struct sys_timer iq81340mc_timer = {
 
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
 	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-	.phys_io        = IOP13XX_PMMR_PHYS_MEM_BASE,
-	.io_pg_offst    = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc,
 	.boot_params    = 0x00000100,
 	.map_io         = iop13xx_map_io,
 	.init_irq       = iop13xx_init_irq,
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index ddb7a3435de9..df3492a9c280 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -93,8 +93,6 @@ static struct sys_timer iq81340sc_timer = {
 
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
 	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-	.phys_io	= IOP13XX_PMMR_PHYS_MEM_BASE,
-	.io_pg_offst	= (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc,
 	.boot_params    = 0x00000100,
 	.map_io         = iop13xx_map_io,
 	.init_irq       = iop13xx_init_irq,
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index f34b0ed80630..7149fcc16c8a 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -164,10 +164,10 @@ static void iop13xx_msi_nop(unsigned int irq)
 static struct irq_chip iop13xx_msi_chip = {
 	.name = "PCI-MSI",
 	.ack = iop13xx_msi_nop,
-	.enable = unmask_msi_irq,
-	.disable = mask_msi_irq,
-	.mask = mask_msi_irq,
-	.unmask = unmask_msi_irq,
+	.irq_enable = unmask_msi_irq,
+	.irq_disable = mask_msi_irq,
+	.irq_mask = mask_msi_irq,
+	.irq_unmask = unmask_msi_irq,
 };
 
 int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 6d5a90813d31..773ea0c95b9f 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -987,7 +987,7 @@ void __init iop13xx_pci_init(void)
 		iop13xx_atux_setup();
 	}
 
-	hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS,
+	hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, 0,
 			"imprecise external abort");
 }
 
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 2bef9b6e1cc9..779f924af302 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -203,8 +203,6 @@ static void __init em7210_init_machine(void)
 }
 
 MACHINE_START(EM7210, "Lanner EM7210")
-	.phys_io	= IQ31244_UART,
-	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= em7210_map_io,
 	.init_irq	= iop32x_init_irq,
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 10384fc37cb2..c6b6f9c5650d 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -207,8 +207,6 @@ static void __init glantank_init_machine(void)
 
 MACHINE_START(GLANTANK, "GLAN Tank")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= GLANTANK_UART,
-	.io_pg_offst	= ((GLANTANK_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= glantank_map_io,
 	.init_irq	= iop32x_init_irq,
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index 736afe1edd1f..ff9e76c09f35 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx, tmp
-		mov	\rx, #0xfe000000	@ physical as well as virtual
-		orr	\rx, \rx, #0x00800000	@ location of the UART
+		.macro	addruart, rp, rv
+		mov	\rp, #0xfe000000	@ physical as well as virtual
+		orr	\rp, \rp, #0x00800000	@ location of the UART
+		mov	\rv, \rp
 		.endm
 
 #define UART_SHIFT	0
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index d6ac85ff109d..fde962c057f0 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -313,8 +313,6 @@ __setup("force_ep80219", force_ep80219_setup);
 
 MACHINE_START(IQ31244, "Intel IQ31244")
 	/* Maintainer: Intel Corp. */
-	.phys_io	= IQ31244_UART,
-	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
@@ -329,8 +327,6 @@ MACHINE_END
  */
 MACHINE_START(EP80219, "Intel EP80219")
 	/* Maintainer: Intel Corp. */
-	.phys_io	= IQ31244_UART,
-	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index c6a0e4ee9d91..3a95950e8737 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -186,8 +186,6 @@ static void __init iq80321_init_machine(void)
 
 MACHINE_START(IQ80321, "Intel IQ80321")
 	/* Maintainer: Intel Corp. */
-	.phys_io	= IQ80321_UART,
-	.io_pg_offst	= ((IQ80321_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= iq80321_map_io,
 	.init_irq	= iop32x_init_irq,
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index f108a31afc2b..626aa375915d 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -327,8 +327,6 @@ static void __init n2100_init_machine(void)
 
 MACHINE_START(N2100, "Thecus N2100")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= N2100_UART,
-	.io_pg_offst	= ((N2100_UART) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= n2100_map_io,
 	.init_irq	= iop32x_init_irq,
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index addb2da78422..40c500dd1fac 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ mmu enabled?
-		moveq	\rx, #0xff000000	@ physical
-		movne	\rx, #0xfe000000	@ virtual
-		orr	\rx, \rx, #0x00ff0000
-		orr	\rx, \rx, #0x0000f700
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00ff0000
+		orr	\rp, \rp, #0x0000f700
+		orr	\rv, #0xfe000000	@ virtual
+		orr	\rp, #0xff000000	@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index c6ff5523b380..c565f8d1e3a4 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -141,8 +141,6 @@ static void __init iq80331_init_machine(void)
 
 MACHINE_START(IQ80331, "Intel IQ80331")
 	/* Maintainer: Intel Corp. */
-	.phys_io	= 0xfefff000,
-	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= iop3xx_map_io,
 	.init_irq	= iop33x_init_irq,
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index fbf551409394..36a9efb254c2 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -141,8 +141,6 @@ static void __init iq80332_init_machine(void)
 
 MACHINE_START(IQ80332, "Intel IQ80332")
 	/* Maintainer: Intel Corp. */
-	.phys_io	= 0xfefff000,
-	.io_pg_offst	= ((0xfffff000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= iop3xx_map_io,
 	.init_irq	= iop33x_init_irq,
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index babb22597163..e24e3d05397f 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -197,7 +197,7 @@ unsigned long ixp2000_gettimeoffset (void)
 	return offset / ticks_per_usec;
 }
 
-static int ixp2000_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t ixp2000_timer_interrupt(int irq, void *dev_id)
 {
 	/* clear timer 1 */
 	ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 1a557e0d055b..88663ab1d2ad 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -253,8 +253,6 @@ static void __init enp2611_init_machine(void)
 
 MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= enp2611_map_io,
 	.init_irq	= ixp2000_init_irq,
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 6a827681680f..0ef533b20972 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,16 +11,14 @@
  *
 */
 
-		.macro  addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xc0000000	@ Physical base
-		movne	\rx, #0xfe000000	@ virtual base
-		orrne	\rx, \rx, #0x00f00000
-		orr	\rx, \rx, #0x00030000
+		.macro  addruart, rp, rv
+		mov	\rp, #0x00030000
 #ifdef	__ARMEB__
-		orr	\rx, \rx, #0x00000003
+		orr	\rp, \rp, #0x00000003
 #endif
+		orr	\rv, \rp, #0xfe000000	@ virtual base
+		orr	\rv, \rv, #0x00f00000
+		orr	\rp, \rp, #0xc0000000	@ Physical base
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 55e5c69352ad..dfffc1e817fa 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -170,8 +170,6 @@ void __init ixdp2400_init_irq(void)
 
 MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ixdp2x00_map_io,
 	.init_irq	= ixdp2400_init_irq,
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 237b61a85e9a..cd4c9bcff2b5 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -285,8 +285,6 @@ void __init ixdp2800_init_irq(void)
 
 MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ixdp2x00_map_io,
 	.init_irq	= ixdp2800_init_irq,
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 0369ec4242a6..6c121bdbe311 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -416,8 +416,6 @@ static void __init ixdp2x01_init_machine(void)
 #ifdef CONFIG_ARCH_IXDP2401
 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
@@ -429,8 +427,6 @@ MACHINE_END
 #ifdef CONFIG_ARCH_IXDP2801
 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
@@ -444,8 +440,6 @@ MACHINE_END
  */
 MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP2000_UART_PHYS_BASE,
-	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 90771cad06f8..f797c5f538b0 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -209,7 +209,7 @@ ixp2000_pci_preinit(void)
 			"the needed workaround has not been configured in");
 #endif
 
-	hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS,
+	hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0,
 				"PCI config cycle to non-existent device");
 }
 
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index 1c06bfc5a7ef..e25e5fe183ba 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -85,8 +85,6 @@ static void __init espresso_init(void)
 
 MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
 	/* Maintainer: Lennert Buytenhek */
-	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
-	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
 	.map_io		= ixp23xx_map_io,
 	.init_irq	= ixp23xx_init_irq,
 	.timer		= &ixp23xx_timer,
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index a82e375465e2..f7c6eef7fa22 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,13 +12,12 @@
  */
 #include <mach/ixp23xx.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ mmu enabled?
-		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
-		ldrne	\rx, =IXP23XX_PERIPHERAL_VIRT	@ virtual
+		.macro	addruart, rp, rv
+		ldr	\rp, =IXP23XX_PERIPHERAL_PHYS 	@ physical
+		ldr	\rv, =IXP23XX_PERIPHERAL_VIRT	@ virtual
 #ifdef __ARMEB__
-		orr	\rx, \rx, #0x00000003
+		orr	\rp, \rp, #0x00000003
+		orr	\rv, \rv, #0x00000003
 #endif
 		.endm
 
diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h
index c3192009a886..57b508bfe280 100644
--- a/arch/arm/mach-ixp23xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp23xx/include/mach/hardware.h
@@ -15,7 +15,6 @@
 #define __ASM_ARCH_HARDWARE_H
 
 /* PCI IO info */
-#define PCIO_BASE		IXP23XX_PCI_IO_VIRT
 #define PCIBIOS_MIN_IO		0x00000000
 #define PCIBIOS_MIN_MEM		0xe0000000
 
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index f1b124a709ab..664e39c2a903 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -328,8 +328,6 @@ static void __init ixdp2351_init(void)
 
 MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
-	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
 	.map_io		= ixdp2351_map_io,
 	.init_irq	= ixdp2351_init_irq,
 	.timer		= &ixp23xx_timer,
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 4b0e598a91c9..563819a83292 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -229,7 +229,7 @@ void __init ixp23xx_pci_preinit(void)
 {
 	ixp23xx_pci_common_init();
 
-	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
+	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,
 			"PCI config cycle to non-existent device");
 
 	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 6d38d769761c..76c61ba73218 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -171,8 +171,6 @@ static void __init roadrunner_init(void)
 
 MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
 	/* Maintainer: Deepak Saxena */
-	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
-	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
 	.map_io		= ixp23xx_map_io,
 	.init_irq	= ixp23xx_init_irq,
 	.timer		= &ixp23xx_timer,
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 9e5070da17ae..6f991c5ae863 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -140,6 +140,14 @@ config MACH_FSG
 	  FSG-3 device. For more information on this platform,
 	  see http://www.nslu2-linux.org/wiki/FSG3/HomePage
 
+config MACH_ARCOM_VULCAN
+	bool
+	prompt "Arcom/Eurotech Vulcan"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support Arcom's
+	  Vulcan board.
+
 #
 # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
 #
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 47d1f60d23fa..d807fc367dd3 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -16,6 +16,7 @@ obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
 obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
 obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
 obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
 
 obj-y	+= common.o
 
@@ -31,6 +32,7 @@ obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
 obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
 obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
 obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
+obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
 obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index d8bc86d76f1d..73745ff102d5 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -164,8 +164,6 @@ static void __init avila_init(void)
 
 MACHINE_START(AVILA, "Gateworks Avila Network Platform")
 	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
@@ -181,8 +179,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_LOFT
 MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
 	/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index e3181534c7f9..24498a932ba6 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -348,7 +348,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
  * This is really ugly and we need a better way of specifying
  * DMA-capable regions of memory.
  */
-void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
+void __init ixp4xx_adjust_zones(unsigned long *zone_size,
 	unsigned long *zhole_size)
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
@@ -356,7 +356,7 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
 	/*
 	 * Only adjust if > 64M on current system
 	 */
-	if (node || (zone_size[0] <= sz))
+	if (zone_size[0] <= sz)
 		return;
 
 	zone_size[1] = zone_size[0] - sz;
@@ -382,7 +382,8 @@ void __init ixp4xx_pci_preinit(void)
 
 
 	/* hook in our fault handler for PCI errors */
-	hook_fault_code(16+6, abort_handler, SIGBUS, "imprecise external abort");
+	hook_fault_code(16+6, abort_handler, SIGBUS, 0,
+			"imprecise external abort");
 
 	pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
 
@@ -502,6 +503,14 @@ struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (mask >= SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 31a47f6a8939..355e3de38733 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -109,8 +109,6 @@ static void __init coyote_init(void)
 #ifdef CONFIG_ARCH_ADI_COYOTE
 MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
@@ -126,8 +124,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_IXDPG425
 MACHINE_START(IXDPG425, "Intel IXDPG425")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 7c1fa54a6145..d398229cfaa5 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -279,8 +279,6 @@ static void __init dsmg600_init(void)
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
 	/* Maintainer: www.nslu2-linux.org */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index e7f4befba422..727ee39ce11c 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -270,8 +270,6 @@ static void __init fsg_init(void)
 
 MACHINE_START(FSG, "Freecom FSG-3")
 	/* Maintainer: www.nslu2-linux.org */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 2583b2a13174..9dc0b4eaa65a 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -96,8 +96,6 @@ static void __init gateway7001_init(void)
 #ifdef CONFIG_MACH_GATEWAY7001
 MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 1c28048209c1..d0e4861ac03d 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -496,8 +496,6 @@ subsys_initcall(gmlr_pci_init);
 
 MACHINE_START(GORAMO_MLR, "MultiLink")
 	/* Maintainer: Krzysztof Halasa */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index c67586b79400..77abead36227 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -164,8 +164,6 @@ static void __init gtwx5715_init(void)
 
 MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
 	/* Maintainer: George Joseph */
-	.phys_io	= IXP4XX_UART2_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 893873eb2a0d..b974a49c0aff 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,14 +10,16 @@
  * published by the Free Software Foundation.
 */
 
-                .macro  addruart, rx, tmp
-                mrc     p15, 0, \rx, c1, c0
-                tst     \rx, #1                 @ MMU enabled?
-                moveq   \rx, #0xc8000000
-                movne   \rx, #0xff000000
-		orrne	\rx, \rx, #0x00b00000
-                add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
-						@ byte writes used - Big Endian.
+                .macro  addruart, rp, rv
+#ifdef __ARMEB__
+                mov     \rp, #3         @ Uart regs are at off set of 3 if
+					@ byte writes used - Big Endian.
+#else
+		mov	\rp, #0
+#endif
+                orr     \rv, \rp, #0xff000000	@ virtual
+		orr	\rv, \rv, #0x00b00000
+                orr     \rp, \rp, #0xc8000000	@ physical
                 .endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index f91ca6d4fbe8..8138371c406e 100644
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -26,6 +26,8 @@
 #define PCIBIOS_MAX_MEM		0x4BFFFFFF
 #endif
 
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
+
 #define pcibios_assign_all_busses()	1
 
 /* Register locations and bits */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 6ea7e2fb2701..de274a1f19d7 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -353,7 +353,7 @@ static inline unsigned int ioread8(const void __iomem *addr)
 		return (unsigned int)inb(port & PIO_MASK);
 	else
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return (unsigned int)__raw_readb(port);
+		return (unsigned int)__raw_readb(addr);
 #else
 		return (unsigned int)__indirect_readb(addr);
 #endif
@@ -381,7 +381,7 @@ static inline unsigned int ioread16(const void __iomem *addr)
 		return	(unsigned int)inw(port & PIO_MASK);
 	else
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le16_to_cpu(__raw_readw((u32)port));
+		return le16_to_cpu((__force __le16)__raw_readw(addr));
 #else
 		return (unsigned int)__indirect_readw(addr);
 #endif
@@ -440,7 +440,7 @@ static inline void iowrite8(u8 value, void __iomem *addr)
 		outb(value, port & PIO_MASK);
 	else
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writeb(value, port);
+		__raw_writeb(value, addr);
 #else
 		__indirect_writeb(value, addr);
 #endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
index 98f5e5e20980..0136eaa29224 100644
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -16,10 +16,10 @@
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
 
-void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes);
 
-#define arch_adjust_zones(node, size, holes) \
-	ixp4xx_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	ixp4xx_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD (SZ_64M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 827cbc4402f4..140783386785 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -100,6 +100,7 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 static struct platform_nand_data ixdp425_flash_nand_data = {
 	.chip = {
+		.nr_chips		= 1,
 		.chip_delay		= 30,
 		.options		= NAND_NO_AUTOINCR,
 #ifdef CONFIG_MTD_PARTITIONS
@@ -256,8 +257,6 @@ static void __init ixdp425_init(void)
 #ifdef CONFIG_ARCH_IXDP425
 MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
@@ -269,8 +268,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_IXDP465
 MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
@@ -282,8 +279,6 @@ MACHINE_END
 #ifdef CONFIG_ARCH_PRPMC1100
 MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
@@ -295,8 +290,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_KIXRP435
 MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index e3ee880aa1e6..f18fee748878 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -314,8 +314,6 @@ static void __init nas100d_init(void)
 
 MACHINE_START(NAS100D, "Iomega NAS 100d")
 	/* Maintainer: www.nslu2-linux.org */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index c14e0034be4b..f79b62eb7614 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -300,8 +300,6 @@ static void __init nslu2_init(void)
 
 MACHINE_START(NSLU2, "Linksys NSLU2")
 	/* Maintainer: www.nslu2-linux.org */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
diff --git a/arch/arm/mach-ixp4xx/vulcan-pci.c b/arch/arm/mach-ixp4xx/vulcan-pci.c
new file mode 100644
index 000000000000..f3111c6840ef
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/vulcan-pci.c
@@ -0,0 +1,73 @@
+/*
+ * arch/arch/mach-ixp4xx/vulcan-pci.c
+ *
+ * Vulcan board-level PCI initialization
+ *
+ * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org>
+ *
+ * based on ixdp425-pci.c:
+ *	Copyright (C) 2002 Intel Corporation.
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA	2
+#define INTB	3
+
+void __init vulcan_pci_preinit(void)
+{
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+	/*
+	 * Cardbus bridge wants way more than the SoC can actually offer,
+	 * and leaves the whole PCI bus in a mess. Artificially limit it
+	 * to 8MB per region. Of course indirect mode doesn't have this
+	 * limitation...
+	 */
+	pci_cardbus_mem_size = SZ_8M;
+	pr_info("Vulcan PCI: limiting CardBus memory size to %dMB\n",
+		(int)(pci_cardbus_mem_size >> 20));
+#endif
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	ixp4xx_pci_preinit();
+}
+
+static int __init vulcan_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	if (slot == 1)
+		return IXP4XX_GPIO_IRQ(INTA);
+
+	if (slot == 2)
+		return IXP4XX_GPIO_IRQ(INTB);
+
+	return -1;
+}
+
+struct hw_pci vulcan_pci __initdata = {
+	.nr_controllers	= 1,
+	.preinit	= vulcan_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= vulcan_map_irq,
+};
+
+int __init vulcan_pci_init(void)
+{
+	if (machine_is_arcom_vulcan())
+		pci_common_init(&vulcan_pci);
+	return 0;
+}
+
+subsys_initcall(vulcan_pci_init);
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
new file mode 100644
index 000000000000..4e72cfdd3c46
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -0,0 +1,244 @@
+/*
+ * arch/arm/mach-ixp4xx/vulcan-setup.c
+ *
+ * Arcom/Eurotech Vulcan board-setup
+ *
+ * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org>
+ *
+ * based on fsg-setup.c:
+ *	Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
+ */
+
+#include <linux/if_ether.h>
+#include <linux/irq.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/io.h>
+#include <linux/w1-gpio.h>
+#include <linux/mtd/plat-ram.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data vulcan_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource vulcan_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct platform_device vulcan_flash = {
+	.name			= "IXP4XX-Flash",
+	.id			= 0,
+	.dev = {
+		.platform_data	= &vulcan_flash_data,
+	},
+	.resource		= &vulcan_flash_resource,
+	.num_resources		= 1,
+};
+
+static struct platdata_mtd_ram vulcan_sram_data = {
+	.mapname	= "Vulcan SRAM",
+	.bankwidth	= 1,
+};
+
+static struct resource vulcan_sram_resource = {
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct platform_device vulcan_sram = {
+	.name			= "mtd-ram",
+	.id			= 0,
+	.dev = {
+		.platform_data	= &vulcan_sram_data,
+	},
+	.resource		= &vulcan_sram_resource,
+	.num_resources		= 1,
+};
+
+static struct resource vulcan_uart_resources[] = {
+	[0] = {
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[2] = {
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct plat_serial8250_port vulcan_uart_data[] = {
+	[0] = {
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	[1] = {
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	[2] = {
+		.irq		= IXP4XX_GPIO_IRQ(4),
+		.irqflags	= IRQF_TRIGGER_LOW,
+		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.uartclk	= 1843200,
+	},
+	[3] = {
+		.irq		= IXP4XX_GPIO_IRQ(4),
+		.irqflags	= IRQF_TRIGGER_LOW,
+		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.uartclk	= 1843200,
+	},
+	{ }
+};
+
+static struct platform_device vulcan_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data	= vulcan_uart_data,
+	},
+	.resource		= vulcan_uart_resources,
+	.num_resources		= ARRAY_SIZE(vulcan_uart_resources),
+};
+
+static struct eth_plat_info vulcan_plat_eth[] = {
+	[0] = {
+		.phy		= 0,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	},
+	[1] = {
+		.phy		= 1,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	},
+};
+
+static struct platform_device vulcan_eth[] = {
+	[0] = {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev = {
+			.platform_data	= &vulcan_plat_eth[0],
+		},
+	},
+	[1] = {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev = {
+			.platform_data	= &vulcan_plat_eth[1],
+		},
+	},
+};
+
+static struct resource vulcan_max6369_resource = {
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct platform_device vulcan_max6369 = {
+	.name			= "max6369_wdt",
+	.id			= -1,
+	.resource		= &vulcan_max6369_resource,
+	.num_resources		= 1,
+};
+
+static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
+	.pin			= 14,
+};
+
+static struct platform_device vulcan_w1_gpio = {
+	.name			= "w1-gpio",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= &vulcan_w1_gpio_pdata,
+	},
+};
+
+static struct platform_device *vulcan_devices[] __initdata = {
+	&vulcan_uart,
+	&vulcan_flash,
+	&vulcan_sram,
+	&vulcan_max6369,
+	&vulcan_eth[0],
+	&vulcan_eth[1],
+	&vulcan_w1_gpio,
+};
+
+static void __init vulcan_init(void)
+{
+	ixp4xx_sys_init();
+
+	/* Flash is spread over both CS0 and CS1 */
+	vulcan_flash_resource.start	 = IXP4XX_EXP_BUS_BASE(0);
+	vulcan_flash_resource.end	 = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+	*IXP4XX_EXP_CS0 = IXP4XX_EXP_BUS_CS_EN		|
+			  IXP4XX_EXP_BUS_STROBE_T(3)	|
+			  IXP4XX_EXP_BUS_SIZE(0xF)	|
+			  IXP4XX_EXP_BUS_BYTE_RD16	|
+			  IXP4XX_EXP_BUS_WR_EN;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	/* SRAM on CS2, (256kB, 8bit, writable) */
+	vulcan_sram_resource.start	= IXP4XX_EXP_BUS_BASE(2);
+	vulcan_sram_resource.end	= IXP4XX_EXP_BUS_BASE(2) + SZ_256K - 1;
+	*IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_CS_EN		|
+			  IXP4XX_EXP_BUS_STROBE_T(1)	|
+			  IXP4XX_EXP_BUS_HOLD_T(2)	|
+			  IXP4XX_EXP_BUS_SIZE(9)	|
+			  IXP4XX_EXP_BUS_SPLT_EN	|
+			  IXP4XX_EXP_BUS_WR_EN		|
+			  IXP4XX_EXP_BUS_BYTE_EN;
+
+	/* XR16L2551 on CS3 (Moto style, 512 bytes, 8bits, writable) */
+	vulcan_uart_resources[2].start	= IXP4XX_EXP_BUS_BASE(3);
+	vulcan_uart_resources[2].end	= IXP4XX_EXP_BUS_BASE(3) + 16 - 1;
+	vulcan_uart_data[2].mapbase	= vulcan_uart_resources[2].start;
+	vulcan_uart_data[3].mapbase	= vulcan_uart_data[2].mapbase + 8;
+	*IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN		|
+			  IXP4XX_EXP_BUS_STROBE_T(3)	|
+			  IXP4XX_EXP_BUS_CYCLES(IXP4XX_EXP_BUS_CYCLES_MOTOROLA)|
+			  IXP4XX_EXP_BUS_WR_EN		|
+			  IXP4XX_EXP_BUS_BYTE_EN;
+
+	/* GPIOS on CS4 (512 bytes, 8bits, writable) */
+	*IXP4XX_EXP_CS4 = IXP4XX_EXP_BUS_CS_EN		|
+			  IXP4XX_EXP_BUS_WR_EN		|
+			  IXP4XX_EXP_BUS_BYTE_EN;
+
+	/* max6369 on CS5 (512 bytes, 8bits, writable) */
+	vulcan_max6369_resource.start	= IXP4XX_EXP_BUS_BASE(5);
+	vulcan_max6369_resource.end	= IXP4XX_EXP_BUS_BASE(5);
+	*IXP4XX_EXP_CS5 = IXP4XX_EXP_BUS_CS_EN		|
+			  IXP4XX_EXP_BUS_WR_EN		|
+			  IXP4XX_EXP_BUS_BYTE_EN;
+
+	platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices));
+}
+
+MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
+	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer		= &ixp4xx_timer,
+	.boot_params	= 0x0100,
+	.init_machine	= vulcan_init,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 4dd74863daa9..5d148c7bc4fb 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -97,8 +97,6 @@ static void __init wg302v2_init(void)
 #ifdef CONFIG_MACH_WG302V2
 MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
-	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 29b2163b1fe3..34106335c728 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -58,6 +58,12 @@ config MACH_TS41X
 	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
 	  devices.
 
+config MACH_DOCKSTAR
+	bool "Seagate FreeAgent DockStar"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Seagate FreeAgent DockStar.
+
 config MACH_OPENRD
         bool
 
@@ -75,6 +81,13 @@ config MACH_OPENRD_CLIENT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell OpenRD Client Board.
 
+config MACH_OPENRD_ULTIMATE
+	bool "Marvell OpenRD Ultimate Board"
+	select MACH_OPENRD
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Ultimate Board.
+
 config MACH_NETSPACE_V2
 	bool "LaCie Network Space v2 NAS Board"
 	help
@@ -87,6 +100,18 @@ config MACH_INETSPACE_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Internet Space v2 NAS.
 
+config MACH_NETSPACE_MAX_V2
+	bool "LaCie Network Space Max v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Network Space Max v2 NAS.
+
+config MACH_D2NET_V2
+	bool "LaCie d2 Network v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie d2 Network v2 NAS.
+
 config MACH_NET2BIG_V2
 	bool "LaCie 2Big Network v2 NAS Board"
 	help
@@ -99,6 +124,12 @@ config MACH_NET5BIG_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 5Big Network v2 NAS.
 
+config MACH_T5325
+	bool "HP t5325 Thin Client"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  HP t5325 Thin Client.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index c0cd5d362002..5dcaa81a2ec3 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -7,12 +7,16 @@ obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
+obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
-obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
-obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o
-obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o
-obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o
+obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NETSPACE_MAX_V2)	+= netspace_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_D2NET_V2)		+= d2net_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
+obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 2e69168fc699..8d03bcef5182 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -31,6 +31,8 @@
 #define ATTR_DEV_CS0		0x3e
 #define ATTR_PCIE_IO		0xe0
 #define ATTR_PCIE_MEM		0xe8
+#define ATTR_PCIE1_IO		0xd0
+#define ATTR_PCIE1_MEM		0xd8
 #define ATTR_SRAM		0x01
 
 /*
@@ -106,17 +108,21 @@ void __init kirkwood_setup_cpu_mbus(void)
 		      TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
 	setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
 		      TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
+	setup_cpu_win(2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
+		      TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE);
+	setup_cpu_win(3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
+		      TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE);
 
 	/*
 	 * Setup window for NAND controller.
 	 */
-	setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
+	setup_cpu_win(4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
 		      TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
 
 	/*
 	 * Setup window for SRAM.
 	 */
-	setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
+	setup_cpu_win(5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
 		      TARGET_SRAM, ATTR_SRAM, -1);
 
 	/*
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 6072eaa5e66a..51ff23b72d3a 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -25,6 +25,7 @@
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
+#include <plat/audio.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
 #include <plat/mvsdio.h>
@@ -44,6 +45,11 @@ static struct map_desc kirkwood_io_desc[] __initdata = {
 		.length		= KIRKWOOD_PCIE_IO_SIZE,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= KIRKWOOD_PCIE1_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
+		.length		= KIRKWOOD_PCIE1_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= KIRKWOOD_REGS_VIRT_BASE,
 		.pfn		= __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
 		.length		= KIRKWOOD_REGS_SIZE,
@@ -402,7 +408,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 	u32 dev, rev;
 
 	kirkwood_pcie_id(&dev, &rev);
-	if (rev == 0)  /* catch all Kirkwood Z0's */
+	if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */
 		mvsdio_data->clock = 100000000;
 	else
 		mvsdio_data->clock = 200000000;
@@ -847,8 +853,10 @@ int __init kirkwood_find_tclk(void)
 	u32 dev, rev;
 
 	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
-					rev == MV88F6281_REV_A1))
+
+	if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+					rev == MV88F6281_REV_A1)) ||
+	    (dev == MV88F6282_DEV_ID))
 		return 200000000;
 
 	return 166666667;
@@ -864,6 +872,48 @@ struct sys_timer kirkwood_timer = {
 	.init = kirkwood_timer_init,
 };
 
+/*****************************************************************************
+ * Audio
+ ****************************************************************************/
+static struct resource kirkwood_i2s_resources[] = {
+	[0] = {
+		.start  = AUDIO_PHYS_BASE,
+		.end    = AUDIO_PHYS_BASE + SZ_16K - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_KIRKWOOD_I2S,
+		.end    = IRQ_KIRKWOOD_I2S,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct kirkwood_asoc_platform_data kirkwood_i2s_data = {
+	.dram        = &kirkwood_mbus_dram_info,
+	.burst       = 128,
+};
+
+static struct platform_device kirkwood_i2s_device = {
+	.name		= "kirkwood-i2s",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_i2s_resources),
+	.resource	= kirkwood_i2s_resources,
+	.dev		= {
+		.platform_data	= &kirkwood_i2s_data,
+	},
+};
+
+static struct platform_device kirkwood_pcm_device = {
+	.name		= "kirkwood-pcm-audio",
+	.id		= -1,
+};
+
+void __init kirkwood_audio_init(void)
+{
+	kirkwood_clk_ctrl |= CGC_AUDIO;
+	platform_device_register(&kirkwood_i2s_device);
+	platform_device_register(&kirkwood_pcm_device);
+}
 
 /*****************************************************************************
  * General
@@ -891,13 +941,22 @@ static char * __init kirkwood_id(void)
 			return "MV88F6192-Z0";
 		else if (rev == MV88F6192_REV_A0)
 			return "MV88F6192-A0";
+		else if (rev == MV88F6192_REV_A1)
+			return "MV88F6192-A1";
 		else
 			return "MV88F6192-Rev-Unsupported";
 	} else if (dev == MV88F6180_DEV_ID) {
 		if (rev == MV88F6180_REV_A0)
 			return "MV88F6180-Rev-A0";
+		else if (rev == MV88F6180_REV_A1)
+			return "MV88F6180-Rev-A1";
 		else
 			return "MV88F6180-Rev-Unsupported";
+	} else if (dev == MV88F6282_DEV_ID) {
+		if (rev == MV88F6282_REV_A0)
+			return "MV88F6282-Rev-A0";
+		else
+			return "MV88F6282-Rev-Unsupported";
 	} else {
 		return "Device-Unknown";
 	}
@@ -923,6 +982,7 @@ void __init kirkwood_init(void)
 	kirkwood_spi_plat_data.tclk = kirkwood_tclk;
 	kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
 	kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
+	kirkwood_i2s_data.tclk = kirkwood_tclk;
 
 	/*
 	 * Disable propagation of mbus errors to the CPU local bus,
@@ -949,12 +1009,14 @@ void __init kirkwood_init(void)
 static int __init kirkwood_clock_gate(void)
 {
 	unsigned int curr = readl(CLOCK_GATING_CTRL);
+	u32 dev, rev;
 
+	kirkwood_pcie_id(&dev, &rev);
 	printk(KERN_DEBUG "Gating clock of unused units\n");
 	printk(KERN_DEBUG "before: 0x%08x\n", curr);
 
 	/* Make sure those units are accessible */
-	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
+	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL);
 
 	/* For SATA: first shutdown the phy */
 	if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
@@ -979,6 +1041,18 @@ static int __init kirkwood_clock_gate(void)
 		writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
 	}
 
+	/* For PCIe 1: first shutdown the phy */
+	if (dev == MV88F6282_DEV_ID) {
+		if (!(kirkwood_clk_ctrl & CGC_PEX1)) {
+			writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
+			while (1)
+				if (readl(PCIE1_STATUS) & 0x1)
+					break;
+			writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
+		}
+	} else  /* keep this bit set for devices that don't have PCIe1 */
+		kirkwood_clk_ctrl |= CGC_PEX1;
+
 	/* Now gate clock the required units */
 	writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
 	printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 05e8a8a5692e..95bb0a73adfb 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -17,6 +17,10 @@ struct mv_sata_platform_data;
 struct mvsdio_platform_data;
 struct mtd_partition;
 struct mtd_info;
+struct kirkwood_asoc_platform_data;
+
+#define KW_PCIE0	(1 << 0)
+#define KW_PCIE1	(1 << 1)
 
 /*
  * Basic Kirkwood init functions used early by machine-setup.
@@ -34,7 +38,7 @@ void kirkwood_ehci_init(void);
 void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data);
 void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq);
-void kirkwood_pcie_init(void);
+void kirkwood_pcie_init(unsigned int portmask);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
 void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
 void kirkwood_spi_init(void);
@@ -43,6 +47,7 @@ void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
 void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
+void kirkwood_audio_init(void);
 
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
new file mode 100644
index 000000000000..4aa86e4a152c
--- /dev/null
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -0,0 +1,229 @@
+/*
+ * arch/arm/mach-kirkwood/d2net_v2-setup.c
+ *
+ * LaCie d2 Network Space v2 Board Setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <mach/leds-ns2.h>
+#include "common.h"
+#include "mpp.h"
+#include "lacie_v2-common.h"
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_PUSH_BUTTON          34
+#define D2NET_V2_GPIO_POWER_SWITCH_ON      13
+#define D2NET_V2_GPIO_POWER_SWITCH_OFF     15
+
+#define D2NET_V2_SWITCH_POWER_ON           0x1
+#define D2NET_V2_SWITCH_POWER_OFF          0x2
+
+static struct gpio_keys_button d2net_v2_buttons[] = {
+	[0] = {
+		.type           = EV_SW,
+		.code           = D2NET_V2_SWITCH_POWER_ON,
+		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_ON,
+		.desc           = "Back power switch (on|auto)",
+		.active_low     = 0,
+	},
+	[1] = {
+		.type           = EV_SW,
+		.code           = D2NET_V2_SWITCH_POWER_OFF,
+		.gpio           = D2NET_V2_GPIO_POWER_SWITCH_OFF,
+		.desc           = "Back power switch (auto|off)",
+		.active_low     = 0,
+	},
+	[2] = {
+		.code           = KEY_POWER,
+		.gpio           = D2NET_V2_GPIO_PUSH_BUTTON,
+		.desc           = "Front Push Button",
+		.active_low     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data d2net_v2_button_data = {
+	.buttons	= d2net_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(d2net_v2_buttons),
+};
+
+static struct platform_device d2net_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_RED_LED		12
+
+static struct gpio_led d2net_v2_gpio_led_pins[] = {
+	{
+		.name	= "d2net_v2:red:fail",
+		.gpio	= D2NET_V2_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
+	.num_leds	= ARRAY_SIZE(d2net_v2_gpio_led_pins),
+	.leds		= d2net_v2_gpio_led_pins,
+};
+
+static struct platform_device d2net_v2_gpio_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_gpio_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
+
+#define D2NET_V2_GPIO_BLUE_LED_SLOW	29
+#define D2NET_V2_GPIO_BLUE_LED_CMD	30
+
+static struct ns2_led d2net_v2_led_pins[] = {
+	{
+		.name	= "d2net_v2:blue:sata",
+		.cmd	= D2NET_V2_GPIO_BLUE_LED_CMD,
+		.slow	= D2NET_V2_GPIO_BLUE_LED_SLOW,
+	},
+};
+
+static struct ns2_led_platform_data d2net_v2_leds_data = {
+	.num_leds	= ARRAY_SIZE(d2net_v2_led_pins),
+	.leds		= d2net_v2_led_pins,
+};
+
+static struct platform_device d2net_v2_leds = {
+	.name		= "leds-ns2",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_v2_leds_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int d2net_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Request power-off */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Red led */
+	MPP13_GPIO,		/* Rear power switch (on|auto) */
+	MPP14_GPIO,		/* USB fuse */
+	MPP15_GPIO,		/* Rear power switch (auto|off) */
+	MPP16_GPIO,		/* SATA 0 power */
+	MPP21_SATA0_ACTn,
+	MPP24_GPIO,		/* USB mode select */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* Blue led (slow register) */
+	MPP30_GPIO,		/* Blue led (command register) */
+	MPP34_GPIO,		/* Power button (1 = Released, 0 = Pushed) */
+	MPP35_GPIO,		/* Inhibit power-off */
+	0
+};
+
+#define D2NET_V2_GPIO_POWER_OFF		7
+
+static void d2net_v2_power_off(void)
+{
+	gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init d2net_v2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(d2net_v2_mpp_config);
+
+	lacie_v2_hdd_power_init(1);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&d2net_v2_ge00_data);
+	kirkwood_sata_init(&d2net_v2_sata_data);
+	kirkwood_uart0_init();
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
+
+	platform_device_register(&d2net_v2_leds);
+	platform_device_register(&d2net_v2_gpio_leds);
+	platform_device_register(&d2net_v2_gpio_buttons);
+
+	if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = d2net_v2_power_off;
+	else
+		pr_err("d2net_v2: failed to configure power-off GPIO\n");
+}
+
+MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &lacie_v2_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index 39bdf4bcace9..9ea71182d31a 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -51,6 +51,14 @@ static struct mvsdio_platform_data db88f6281_mvsdio_data = {
 };
 
 static unsigned int db88f6281_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
 	MPP37_GPIO,
 	MPP38_GPIO,
 	0
@@ -74,17 +82,21 @@ static void __init db88f6281_init(void)
 
 static int __init db88f6281_pci_init(void)
 {
-	if (machine_is_db88f6281_bp())
-		kirkwood_pcie_init();
+	if (machine_is_db88f6281_bp()) {
+		u32 dev, rev;
 
+		kirkwood_pcie_id(&dev, &rev);
+		if (dev == MV88F6282_DEV_ID)
+			kirkwood_pcie_init(KW_PCIE1 | KW_PCIE0);
+		else
+			kirkwood_pcie_init(KW_PCIE0);
+	}
 	return 0;
 }
 subsys_initcall(db88f6281_pci_init);
 
 MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= db88f6281_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
new file mode 100644
index 000000000000..433ea368c060
--- /dev/null
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -0,0 +1,110 @@
+/*
+ * arch/arm/mach-kirkwood/dockstar-setup.c
+ *
+ * Seagate FreeAgent DockStar Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition dockstar_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct gpio_led dockstar_led_pins[] = {
+	{
+		.name			= "dockstar:green:health",
+		.default_trigger	= "default-on",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "dockstar:orange:misc",
+		.default_trigger	= "none",
+		.gpio			= 47,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data dockstar_led_data = {
+	.leds		= dockstar_led_pins,
+	.num_leds	= ARRAY_SIZE(dockstar_led_pins),
+};
+
+static struct platform_device dockstar_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &dockstar_led_data,
+	}
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+	MPP29_GPIO,	/* USB Power Enable */
+	MPP46_GPIO,	/* LED green */
+	MPP47_GPIO,	/* LED orange */
+	0
+};
+
+static void __init dockstar_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+
+	/* setup gpio pin select */
+	kirkwood_mpp_conf(dockstar_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
+
+	if (gpio_request(29, "USB Power Enable") != 0 ||
+	    gpio_direction_output(29, 1) != 0)
+		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&dockstar_ge00_data);
+
+	platform_device_register(&dockstar_leds);
+}
+
+MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
+	.boot_params	= 0x00000100,
+	.init_machine	= dockstar_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 54d07c89d4ff..8f47dc0a2fef 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -121,8 +121,6 @@ static void __init guruplug_init(void)
 
 MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
 	/* Maintainer: Siddarth Gore <gores@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= guruplug_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 418f5017c50e..aff0e1327e38 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -59,8 +59,9 @@
 #define CGC_SATA1		(1 << 15)
 #define CGC_XOR1		(1 << 16)
 #define CGC_CRYPTO		(1 << 17)
+#define CGC_PEX1		(1 << 18)
 #define CGC_GE1			(1 << 19)
 #define CGC_TDM			(1 << 20)
-#define CGC_RESERVED		((1 << 18) | (0x6 << 21))
+#define CGC_RESERVED		(0x6 << 21)
 
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index d0606774dea7..db06ae437d08 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
-	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =KIRKWOOD_REGS_PHYS_BASE
+	ldr	\rv, =KIRKWOOD_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
index f00a0a45a67e..9da2eb59180b 100644
--- a/arch/arm/mach-kirkwood/include/mach/irqs.h
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -23,6 +23,7 @@
 #define IRQ_KIRKWOOD_XOR_10	7
 #define IRQ_KIRKWOOD_XOR_11	8
 #define IRQ_KIRKWOOD_PCIE	9
+#define IRQ_KIRKWOOD_PCIE1	10
 #define IRQ_KIRKWOOD_GE00_SUM	11
 #define IRQ_KIRKWOOD_GE01_SUM	15
 #define IRQ_KIRKWOOD_USB	19
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index a15cf0ee22bd..6e924b398919 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -16,36 +16,48 @@
  * Marvell Kirkwood address maps.
  *
  * phys
- * e0000000	PCIe Memory space
+ * e0000000	PCIe #0 Memory space
+ * e8000000	PCIe #1 Memory space
  * f1000000	on-chip peripheral registers
- * f2000000	PCIe I/O space
- * f3000000	NAND controller address window
- * f4000000	Security Accelerator SRAM
+ * f2000000	PCIe #0 I/O space
+ * f3000000	PCIe #1 I/O space
+ * f4000000	NAND controller address window
+ * f5000000	Security Accelerator SRAM
  *
  * virt		phys		size
- * fee00000	f1000000	1M	on-chip peripheral registers
- * fef00000	f2000000	1M	PCIe I/O space
+ * fed00000	f1000000	1M	on-chip peripheral registers
+ * fee00000	f2000000	1M	PCIe #0 I/O space
+ * fef00000	f3000000	1M	PCIe #1 I/O space
  */
 
-#define KIRKWOOD_SRAM_PHYS_BASE		0xf4000000
+#define KIRKWOOD_SRAM_PHYS_BASE		0xf5000000
 #define KIRKWOOD_SRAM_SIZE		SZ_2K
 
-#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
+#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf4000000
 #define KIRKWOOD_NAND_MEM_SIZE		SZ_1K
 
+#define KIRKWOOD_PCIE1_IO_PHYS_BASE	0xf3000000
+#define KIRKWOOD_PCIE1_IO_VIRT_BASE	0xfef00000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00100000
+#define KIRKWOOD_PCIE1_IO_SIZE		SZ_1M
+
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfee00000
 #define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
 #define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
 
 #define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE		0xfee00000
+#define KIRKWOOD_REGS_VIRT_BASE		0xfed00000
 #define KIRKWOOD_REGS_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
 #define KIRKWOOD_PCIE_MEM_BUS_BASE	0xe0000000
 #define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
 
+#define KIRKWOOD_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define KIRKWOOD_PCIE1_MEM_BUS_BASE	0xe8000000
+#define KIRKWOOD_PCIE1_MEM_SIZE		SZ_128M
+
 /*
  * Register Map
  */
@@ -72,6 +84,9 @@
 #define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
 #define PCIE_LINK_CTRL		(PCIE_VIRT_BASE | 0x70)
 #define PCIE_STATUS		(PCIE_VIRT_BASE | 0x1a04)
+#define PCIE1_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x44000)
+#define PCIE1_LINK_CTRL		(PCIE1_VIRT_BASE | 0x70)
+#define PCIE1_STATUS		(PCIE1_VIRT_BASE | 0x1a04)
 
 #define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
 
@@ -96,6 +111,9 @@
 
 #define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
 
+#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0xA0000)
+#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0xA0000)
+
 /*
  * Supported devices and revisions.
  */
@@ -107,8 +125,12 @@
 #define MV88F6192_DEV_ID	0x6192
 #define MV88F6192_REV_Z0	0
 #define MV88F6192_REV_A0	2
+#define MV88F6192_REV_A1	3
 
 #define MV88F6180_DEV_ID	0x6180
 #define MV88F6180_REV_A0	2
+#define MV88F6180_REV_A1	3
 
+#define MV88F6282_DEV_ID	0x6282
+#define MV88F6282_REV_A0	0
 #endif
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
new file mode 100644
index 000000000000..24b536ebdf13
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h
+ *
+ * Platform data structure for netxbig LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NETXBIG_H
+#define __MACH_LEDS_NETXBIG_H
+
+struct netxbig_gpio_ext {
+	unsigned	*addr;
+	int		num_addr;
+	unsigned	*data;
+	int		num_data;
+	unsigned	enable;
+};
+
+enum netxbig_led_mode {
+	NETXBIG_LED_OFF,
+	NETXBIG_LED_ON,
+	NETXBIG_LED_SATA,
+	NETXBIG_LED_TIMER1,
+	NETXBIG_LED_TIMER2,
+	NETXBIG_LED_MODE_NUM,
+};
+
+#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM
+
+struct netxbig_led_timer {
+	unsigned long		delay_on;
+	unsigned long		delay_off;
+	enum netxbig_led_mode	mode;
+};
+
+struct netxbig_led {
+	const char	*name;
+	const char	*default_trigger;
+	int		mode_addr;
+	int		*mode_val;
+	int		bright_addr;
+};
+
+struct netxbig_led_platform_data {
+	struct netxbig_gpio_ext	*gpio_ext;
+	struct netxbig_led_timer *timer;
+	int			num_timer;
+	struct netxbig_led	*leds;
+	int			num_leds;
+};
+
+#endif /* __MACH_LEDS_NETXBIG_H */
diff --git a/arch/arm/mach-kirkwood/include/mach/leds-ns2.h b/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
new file mode 100644
index 000000000000..e21272e5f668
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/leds-ns2.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/leds-ns2.h
+ *
+ * Platform data structure for Network Space v2 LED driver
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_LEDS_NS2_H
+#define __MACH_LEDS_NS2_H
+
+struct ns2_led {
+	const char	*name;
+	const char	*default_trigger;
+	unsigned	cmd;
+	unsigned	slow;
+};
+
+struct ns2_led_platform_data {
+	int		num_leds;
+	struct ns2_led	*leds;
+};
+
+#endif /* __MACH_LEDS_NS2_H */
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
new file mode 100644
index 000000000000..d3ea1b6c8a02
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <mach/irqs.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition lacie_v2_flash_parts[] = {
+	{
+		.name = "u-boot",
+		.size = MTDPART_SIZ_FULL,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE, /* force read-only */
+	},
+};
+
+static const struct flash_platform_data lacie_v2_flash = {
+	.type		= "mx25l4005a",
+	.name		= "spi_flash",
+	.parts		= lacie_v2_flash_parts,
+	.nr_parts	= ARRAY_SIZE(lacie_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &lacie_v2_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+void __init lacie_v2_register_flash(void)
+{
+	spi_register_board_info(lacie_v2_spi_slave_info,
+				ARRAY_SIZE(lacie_v2_spi_slave_info));
+	kirkwood_spi_init();
+}
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+/*
+ * i2c addr | chip         | description
+ * 0x50     | HT24LC04     | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data  = &at24c04,
+	}
+};
+
+void __init lacie_v2_register_i2c_devices(void)
+{
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, lacie_v2_i2c_info,
+				ARRAY_SIZE(lacie_v2_i2c_info));
+}
+
+/*****************************************************************************
+ * Hard Disk power
+ ****************************************************************************/
+
+static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
+
+void __init lacie_v2_hdd_power_init(int hdd_num)
+{
+	int i;
+	int err;
+
+	/* Power up all hard disks. */
+	for (i = 0; i < hdd_num; i++) {
+		err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
+		if (err == 0) {
+			err = gpio_direction_output(
+					lacie_v2_gpio_hdd_power[i], 1);
+			/* Free the HDD power GPIOs. This allow user-space to
+			 * configure them via the gpiolib sysfs interface. */
+			gpio_free(lacie_v2_gpio_hdd_power[i]);
+		}
+		if (err)
+			pr_err("Failed to power up HDD%d\n", i + 1);
+	}
+}
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static void lacie_v2_timer_init(void)
+{
+	kirkwood_tclk = 166666667;
+	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+struct sys_timer lacie_v2_timer = {
+	.init = lacie_v2_timer_init,
+};
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
new file mode 100644
index 000000000000..af521315b87b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-kirkwood/lacie_v2-common.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+#define __ARCH_KIRKWOOD_LACIE_V2_COMMON_H
+
+void lacie_v2_register_flash(void);
+void lacie_v2_register_i2c_devices(void);
+void lacie_v2_hdd_power_init(int hdd_num);
+
+extern struct sys_timer lacie_v2_timer;
+
+#endif
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index a5900f64e38c..065187d177c6 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -23,7 +23,8 @@ static unsigned int __init kirkwood_variant(void)
 
 	kirkwood_pcie_id(&dev, &rev);
 
-	if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
+	if ((dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) ||
+	    (dev == MV88F6282_DEV_ID))
 		return MPP_F6281_MASK;
 	if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
 		return MPP_F6192_MASK;
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index bc74278ed311..9b0a94d85c3e 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -11,7 +11,7 @@
 #ifndef __KIRKWOOD_MPP_H
 #define __KIRKWOOD_MPP_H
 
-#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281) ( \
+#define MPP(_num, _sel, _in, _out, _F6180, _F6190, _F6192, _F6281, _F6282) ( \
 	/* MPP number */		((_num) & 0xff) | \
 	/* MPP select value */		(((_sel) & 0xf) << 8) | \
 	/* may be input signal */	((!!(_in)) << 12) | \
@@ -19,282 +19,332 @@
 	/* available on F6180 */	((!!(_F6180)) << 14) | \
 	/* available on F6190 */	((!!(_F6190)) << 15) | \
 	/* available on F6192 */	((!!(_F6192)) << 16) | \
-	/* available on F6281 */	((!!(_F6281)) << 17))
+	/* available on F6281 */	((!!(_F6281)) << 17) | \
+	/* available on F6282 */	((!!(_F6282)) << 18))
 
 #define MPP_NUM(x)	((x) & 0xff)
 #define MPP_SEL(x)	(((x) >> 8) & 0xf)
 
-				/*   num sel  i  o  6180 6190 6192 6281 */
-
-#define MPP_INPUT_MASK		MPP(  0, 0x0, 1, 0, 0,   0,   0,   0    )
-#define MPP_OUTPUT_MASK		MPP(  0, 0x0, 0, 1, 0,   0,   0,   0    )
-
-#define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0    )
-#define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0    )
-#define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0    )
-#define MPP_F6281_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   1    )
-
-#define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP0_NF_IO2		MPP(  0, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 1, 1,   1,   1,   1    )
-
-#define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP1_NF_IO3		MPP(  1, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 1, 1,   1,   1,   1    )
-
-#define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP2_NF_IO4		MPP(  2, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 1, 1,   1,   1,   1    )
-
-#define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP3_NF_IO5		MPP(  3, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP3_SPI_MISO		MPP(  3, 0x2, 1, 0, 1,   1,   1,   1    )
-
-#define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP4_NF_IO6		MPP(  4, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP4_UART0_RXD		MPP(  4, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 1, 0,   0,   1,   1    )
-#define MPP4_PTP_CLK		MPP(  4, 0xd, 1, 0, 1,   1,   1,   1    )
-
-#define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP5_NF_IO7		MPP(  5, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 1, 1,   1,   1,   1    )
-#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 1, 0,   1,   1,   1    )
-
-#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 1, 1,   1,   1,   1    )
-#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 1, 1,   1,   1,   1    )
-
-#define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 1, 1,   1,   1,   1    )
-#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 1, 1,   1,   1,   1    )
-
-#define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,    1,  1,   1    )
-#define MPP8_TW_SDA		MPP(  8, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 1, 1,   1,   1,   1    )
-#define MPP8_MII0_RXERR		MPP(  8, 0x4, 1, 0, 0,   1,   1,   1    )
-#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 1, 0,   0,   1,   1    )
-#define MPP8_PTP_CLK		MPP(  8, 0xc, 1, 0, 1,   1,   1,   1    )
-#define MPP8_MII0_COL		MPP(  8, 0xd, 1, 0, 1,   1,   1,   1    )
-
-#define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP9_TW_SCK		MPP(  9, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP9_UART0_CTS		MPP(  9, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP9_UART1_CTS		MPP(  9, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 1, 0,   1,   1,   1    )
-#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 1, 0, 1,   1,   1,   1    )
-#define MPP9_MII0_CRS		MPP(  9, 0xd, 1, 0, 1,   1,   1,   1    )
-
-#define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1    )
-#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1    )
-#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1    )
-
-#define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP11_UART0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1    )
-#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1    )
-#define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1    )
-#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 1, 0,   1,   1,   1    )
-
-#define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 1, 1,   1,   1,   1    )
-
-#define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP13_SD_CMD		MPP( 13, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 1, 1,   1,   1,   1    )
-
-#define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP14_SD_D0		MPP( 14, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP14_UART1_RXD		MPP( 14, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP14_MII0_COL		MPP( 14, 0xd, 1, 0, 1,   1,   1,   1    )
-
-#define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP15_SD_D1		MPP( 15, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 1, 1,   1,   1,   1    )
-#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 1, 0,   1,   1,   1    )
-
-#define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP16_SD_D2		MPP( 16, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP16_UART0_CTS		MPP( 16, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP16_UART1_RXD		MPP( 16, 0x3, 1, 0, 1,   1,   1,   1    )
-#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP16_MII0_CRS		MPP( 16, 0xd, 1, 0, 1,   1,   1,   1    )
-
-#define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP17_SD_D3		MPP( 17, 0x1, 1, 1, 1,   1,   1,   1    )
-#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 1, 0,   1,   1,   1    )
-
-#define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP18_NF_IO0		MPP( 18, 0x1, 1, 1, 1,   1,   1,   1    )
-
-#define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1    )
-#define MPP19_NF_IO1		MPP( 19, 0x1, 1, 1, 1,   1,   1,   1    )
-
-#define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP20_TSMP0		MPP( 20, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP20_GE1_0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP20_AUDIO_SPDIFI	MPP( 20, 0x4, 1, 0, 0,   0,   1,   1    )
-#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 1, 0,   0,   1,   1    )
-
-#define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP21_TSMP1		MPP( 21, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP21_GE1_1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP21_AUDIO_SPDIFO	MPP( 21, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 1, 0,   1,   1,   1    )
-
-#define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP22_TSMP2		MPP( 22, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP22_GE1_2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP22_AUDIO_SPDIFRMKCLK	MPP( 22, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 1, 0,   0,   1,   1    )
-
-#define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP23_TSMP3		MPP( 23, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 1, 0, 0,   0,   1,   1    )
-#define MPP23_GE1_3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP23_AUDIO_I2SBCLK	MPP( 23, 0x4, 0, 1, 0,   0,   1,   1    )
-#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 1, 0,   1,   1,   1    )
-
-#define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP24_TSMP4		MPP( 24, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP24_TDM_SPI_CS0	DEV( 24, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP24_GE1_4		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP24_AUDIO_I2SDO	MPP( 24, 0x4, 0, 1, 0,   0,   1,   1    )
-
-#define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP25_TSMP5		MPP( 25, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP25_GE1_5		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP25_AUDIO_I2SLRCLK	MPP( 25, 0x4, 0, 1, 0,   0,   1,   1    )
-
-#define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP26_TSMP6		MPP( 26, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 1, 0, 0,   0,   1,   1    )
-#define MPP26_GE1_6		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP26_AUDIO_I2SMCLK	MPP( 26, 0x4, 0, 1, 0,   0,   1,   1    )
-
-#define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP27_TSMP7		MPP( 27, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP27_GE1_7		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP27_AUDIO_I2SDI	MPP( 27, 0x4, 1, 0, 0,   0,   1,   1    )
-
-#define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP28_TSMP8		MPP( 28, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1    )
-#define MPP28_GE1_8		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP28_AUDIO_EXTCLK	MPP( 28, 0x4, 1, 0, 0,   0,   1,   1    )
-
-#define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP29_TSMP9		MPP( 29, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1    )
-#define MPP29_GE1_9		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP30_TSMP10		MPP( 30, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP30_TDM_PCLK		MPP( 30, 0x2, 1, 1, 0,   0,   1,   1    )
-#define MPP30_GE1_10		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP31_TSMP11		MPP( 31, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP31_TDM_FS		MPP( 31, 0x2, 1, 1, 0,   0,   1,   1    )
-#define MPP31_GE1_11		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP32_TSMP12		MPP( 32, 0x1, 1, 1, 0,   0,   1,   1    )
-#define MPP32_TDM_DRX		MPP( 32, 0x2, 1, 0, 0,   0,   1,   1    )
-#define MPP32_GE1_12		MPP( 32, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP33_GPIO		MPP( 33, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP33_GE1_13		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1    )
-#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP34_GE1_14		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1    )
-
-#define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1    )
-#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1    )
-#define MPP35_GE1_15		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1    )
-#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 1, 0,   1,   1,   1    )
-#define MPP35_MII0_RXERR	MPP( 35, 0xc, 1, 0, 1,   1,   1,   1    )
-
-#define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP36_TSMP0		MPP( 36, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP36_AUDIO_SPDIFI	MPP( 36, 0x4, 1, 0, 1,   0,   0,   1    )
-
-#define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP37_TSMP1		MPP( 37, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP37_AUDIO_SPDIFO	MPP( 37, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP38_TSMP2		MPP( 38, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP38_AUDIO_SPDIFRMLCLK	MPP( 38, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP39_TSMP3		MPP( 39, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP39_AUDIO_I2SBCLK	MPP( 39, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP40_TSMP4		MPP( 40, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP40_AUDIO_I2SDO	MPP( 40, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP41_TSMP5		MPP( 41, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 1, 0, 0,   0,   0,   1    )
-#define MPP41_AUDIO_I2SLRC	MPP( 41, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP42_TSMP6		MPP( 42, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP42_AUDIO_I2SMCLK	MPP( 42, 0x4, 0, 1, 1,   0,   0,   1    )
-
-#define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP43_TSMP7		MPP( 43, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1    )
-#define MPP43_AUDIO_I2SDI	MPP( 43, 0x4, 1, 0, 1,   0,   0,   1    )
-
-#define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1    )
-#define MPP44_TSMP8		MPP( 44, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1    )
-#define MPP44_AUDIO_EXTCLK	MPP( 44, 0x4, 1, 0, 1,   0,   0,   1    )
-
-#define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP45_TSMP9		MPP( 45, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP45_TDM_PCLK		MPP( 45, 0x2, 1, 1, 0,   0,   0,   1    )
-
-#define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP46_TSMP10		MPP( 46, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP46_TDM_FS		MPP( 46, 0x2, 1, 1, 0,   0,   0,   1    )
-
-#define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP47_TSMP11		MPP( 47, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP47_TDM_DRX		MPP( 47, 0x2, 1, 0, 0,   0,   0,   1    )
-
-#define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
-
-#define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
-#define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 1, 0,   0,   0,   1    )
-#define MPP49_PTP_CLK		MPP( 49, 0x5, 1, 0, 0,   0,   0,   1    )
+				/*   num sel  i  o  6180 6190 6192 6281 6282 */
+
+#define MPP_INPUT_MASK		MPP(  0, 0x0, 1, 0, 0,   0,   0,   0,   0 )
+#define MPP_OUTPUT_MASK		MPP(  0, 0x0, 0, 1, 0,   0,   0,   0,   0 )
+
+#define MPP_F6180_MASK		MPP(  0, 0x0, 0, 0, 1,   0,   0,   0,   0 )
+#define MPP_F6190_MASK		MPP(  0, 0x0, 0, 0, 0,   1,   0,   0,   0 )
+#define MPP_F6192_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   1,   0,   0 )
+#define MPP_F6281_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   1,   0 )
+#define MPP_F6282_MASK		MPP(  0, 0x0, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP0_GPIO		MPP(  0, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP0_NF_IO2		MPP(  0, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP0_SPI_SCn		MPP(  0, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+
+#define MPP1_GPO		MPP(  1, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP1_NF_IO3		MPP(  1, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP1_SPI_MOSI		MPP(  1, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+
+#define MPP2_GPO		MPP(  2, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP2_NF_IO4		MPP(  2, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP2_SPI_SCK		MPP(  2, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+
+#define MPP3_GPO		MPP(  3, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP3_NF_IO5		MPP(  3, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP3_SPI_MISO		MPP(  3, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP4_GPIO		MPP(  4, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP4_NF_IO6		MPP(  4, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP4_UART0_RXD		MPP(  4, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP4_SATA1_ACTn		MPP(  4, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP4_LCD_VGA_HSYNC	MPP(  4, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP4_PTP_CLK		MPP(  4, 0xd, 1, 0, 1,   1,   1,   1,   0 )
+
+#define MPP5_GPO		MPP(  5, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP5_NF_IO7		MPP(  5, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP5_UART0_TXD		MPP(  5, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP5_PTP_TRIG_GEN	MPP(  5, 0x4, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP5_SATA0_ACTn		MPP(  5, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP5_LCD_VGA_VSYNC	MPP(  5, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP6_SYSRST_OUTn	MPP(  6, 0x1, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP6_SPI_MOSI		MPP(  6, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP6_PTP_TRIG_GEN	MPP(  6, 0x3, 0, 1, 1,   1,   1,   1,   0 )
+
+#define MPP7_GPO		MPP(  7, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP7_PEX_RST_OUTn	MPP(  7, 0x1, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP7_SPI_SCn		MPP(  7, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP7_PTP_TRIG_GEN	MPP(  7, 0x3, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP7_LCD_PWM		MPP(  7, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+
+#define MPP8_GPIO		MPP(  8, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP8_TW0_SDA		MPP(  8, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP8_UART0_RTS		MPP(  8, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP8_UART1_RTS		MPP(  8, 0x3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP8_MII0_RXERR		MPP(  8, 0x4, 1, 0, 0,   1,   1,   1,   1 )
+#define MPP8_SATA1_PRESENTn	MPP(  8, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP8_PTP_CLK		MPP(  8, 0xc, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP8_MII0_COL		MPP(  8, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP9_GPIO		MPP(  9, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP9_TW0_SCK		MPP(  9, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP9_UART0_CTS		MPP(  9, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP9_UART1_CTS		MPP(  9, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP9_SATA0_PRESENTn	MPP(  9, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP9_PTP_EVENT_REQ	MPP(  9, 0xc, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP9_MII0_CRS		MPP(  9, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP10_GPO		MPP( 10, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP10_SPI_SCK		MPP( 10, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP10_UART0_TXD		MPP( 10, 0X3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP10_SATA1_ACTn	MPP( 10, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP10_PTP_TRIG_GEN	MPP( 10, 0xc, 0, 1, 1,   1,   1,   1,   0 )
+
+#define MPP11_GPIO		MPP( 11, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP11_SPI_MISO		MPP( 11, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP11_UART0_RXD		MPP( 11, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP11_PTP_EVENT_REQ	MPP( 11, 0x4, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_TRIG_GEN	MPP( 11, 0xc, 0, 1, 1,   1,   1,   1,   0 )
+#define MPP11_PTP_CLK		MPP( 11, 0xd, 1, 0, 1,   1,   1,   1,   0 )
+#define MPP11_SATA0_ACTn	MPP( 11, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+
+#define MPP12_GPO		MPP( 12, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP12_SD_CLK		MPP( 12, 0x1, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP12_AU_SPDIF0		MPP( 12, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP12_SPI_MOSI		MPP( 12, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP12_TW1_SDA		MPP( 12, 0xd, 1, 0, 0,   0,   0,   0,   1 )
+
+#define MPP13_GPIO		MPP( 13, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP13_SD_CMD		MPP( 13, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP13_UART1_TXD		MPP( 13, 0x3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP13_AU_SPDIFRMCLK	MPP( 13, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP13_LCDPWM		MPP( 13, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+
+#define MPP14_GPIO		MPP( 14, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP14_SD_D0		MPP( 14, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP14_UART1_RXD		MPP( 14, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP14_SATA1_PRESENTn	MPP( 14, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP14_AU_SPDIFI		MPP( 14, 0xa, 1, 0, 0,   0,   0,   0,   1 )
+#define MPP14_AU_I2SDI		MPP( 14, 0xb, 1, 0, 0,   0,   0,   0,   1 )
+#define MPP14_MII0_COL		MPP( 14, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP15_GPIO		MPP( 15, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP15_SD_D1		MPP( 15, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP15_UART0_RTS		MPP( 15, 0x2, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP15_UART1_TXD		MPP( 15, 0x3, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP15_SATA0_ACTn	MPP( 15, 0x4, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP15_SPI_CSn		MPP( 15, 0xb, 0, 1, 0,   0,   0,   0,   1 )
+
+#define MPP16_GPIO		MPP( 16, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP16_SD_D2		MPP( 16, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP16_UART0_CTS		MPP( 16, 0x2, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP16_UART1_RXD		MPP( 16, 0x3, 1, 0, 1,   1,   1,   1,   1 )
+#define MPP16_SATA1_ACTn	MPP( 16, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP16_LCD_EXT_REF_CLK	MPP( 16, 0xb, 1, 0, 0,   0,   0,   0,   1 )
+#define MPP16_MII0_CRS		MPP( 16, 0xd, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP17_GPIO		MPP( 17, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP17_SD_D3		MPP( 17, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP17_SATA0_PRESENTn	MPP( 17, 0x4, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP17_SATA1_ACTn	MPP( 17, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP17_TW1_SCK		MPP( 17, 0xd, 1, 1, 0,   0,   0,   0,   1 )
+
+#define MPP18_GPO		MPP( 18, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP18_NF_IO0		MPP( 18, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP18_PEX0_CLKREQ	MPP( 18, 0x2, 0, 1, 0,   0,   0,   0,   1 )
+
+#define MPP19_GPO		MPP( 19, 0x0, 0, 1, 1,   1,   1,   1,   1 )
+#define MPP19_NF_IO1		MPP( 19, 0x1, 1, 1, 1,   1,   1,   1,   1 )
+
+#define MPP20_GPIO		MPP( 20, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP20_TSMP0		MPP( 20, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP20_TDM_CH0_TX_QL	MPP( 20, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP20_GE1_TXD0		MPP( 20, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP20_AU_SPDIFI		MPP( 20, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP20_SATA1_ACTn	MPP( 20, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP20_LCD_D0		MPP( 20, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP21_GPIO		MPP( 21, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP21_TSMP1		MPP( 21, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP21_TDM_CH0_RX_QL	MPP( 21, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP21_GE1_TXD1		MPP( 21, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP21_AU_SPDIFO		MPP( 21, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP21_SATA0_ACTn	MPP( 21, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP21_LCD_D1		MPP( 21, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP22_GPIO		MPP( 22, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP22_TSMP2		MPP( 22, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP22_TDM_CH2_TX_QL	MPP( 22, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_GE1_TXD2		MPP( 22, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP22_AU_SPDIFRMKCLK	MPP( 22, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_SATA1_PRESENTn	MPP( 22, 0x5, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP22_LCD_D2		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP23_GPIO		MPP( 23, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP23_TSMP3		MPP( 23, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP23_TDM_CH2_RX_QL	MPP( 23, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP23_GE1_TXD3		MPP( 23, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP23_AU_I2SBCLK	MPP( 23, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP23_SATA0_PRESENTn	MPP( 23, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP23_LCD_D3		MPP( 23, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP24_GPIO		MPP( 24, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP24_TSMP4		MPP( 24, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP24_TDM_SPI_CS0	MPP( 24, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP24_GE1_RXD0		MPP( 24, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP24_AU_I2SDO		MPP( 24, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP24_LCD_D4		MPP( 24, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP25_GPIO		MPP( 25, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP25_TSMP5		MPP( 25, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP25_TDM_SPI_SCK	MPP( 25, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP25_GE1_RXD1		MPP( 25, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP25_AU_I2SLRCLK	MPP( 25, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP25_LCD_D5		MPP( 25, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP26_GPIO		MPP( 26, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP26_TSMP6		MPP( 26, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP26_TDM_SPI_MISO	MPP( 26, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP26_GE1_RXD2		MPP( 26, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP26_AU_I2SMCLK	MPP( 26, 0x4, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP26_LCD_D6		MPP( 26, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP27_GPIO		MPP( 27, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP27_TSMP7		MPP( 27, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP27_TDM_SPI_MOSI	MPP( 27, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP27_GE1_RXD3		MPP( 27, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP27_AU_I2SDI		MPP( 27, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP27_LCD_D7		MPP( 27, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP28_GPIO		MPP( 28, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP28_TSMP8		MPP( 28, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP28_TDM_CODEC_INTn	MPP( 28, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP28_GE1_COL		MPP( 28, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP28_AU_EXTCLK		MPP( 28, 0x4, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP28_LCD_D8		MPP( 28, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP29_GPIO		MPP( 29, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP29_TSMP9		MPP( 29, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP29_TDM_CODEC_RSTn	MPP( 29, 0x2, 0, 0, 0,   0,   1,   1,   1 )
+#define MPP29_GE1_TCLK		MPP( 29, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP29_LCD_D9		MPP( 29, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP30_GPIO		MPP( 30, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP30_TSMP10		MPP( 30, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP30_TDM_PCLK		MPP( 30, 0x2, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP30_GE1_RXCTL		MPP( 30, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP30_LCD_D10		MPP( 30, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP31_GPIO		MPP( 31, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP31_TSMP11		MPP( 31, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP31_TDM_FS		MPP( 31, 0x2, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP31_GE1_RXCLK		MPP( 31, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP31_LCD_D11		MPP( 31, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP32_GPIO		MPP( 32, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP32_TSMP12		MPP( 32, 0x1, 1, 1, 0,   0,   1,   1,   1 )
+#define MPP32_TDM_DRX		MPP( 32, 0x2, 1, 0, 0,   0,   1,   1,   1 )
+#define MPP32_GE1_TCLKOUT	MPP( 32, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP32_LCD_D12		MPP( 32, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP33_GPO		MPP( 33, 0x0, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP33_TDM_DTX		MPP( 33, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP33_GE1_TXCTL		MPP( 33, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP33_LCD_D13		MPP( 33, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP34_GPIO		MPP( 34, 0x0, 1, 1, 0,   1,   1,   1,   1 )
+#define MPP34_TDM_SPI_CS1	MPP( 34, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP34_GE1_TXEN		MPP( 34, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP34_SATA1_ACTn	MPP( 34, 0x5, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP34_LCD_D14		MPP( 34, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP35_GPIO		MPP( 35, 0x0, 1, 1, 1,   1,   1,   1,   1 )
+#define MPP35_TDM_CH0_TX_QL	MPP( 35, 0x2, 0, 1, 0,   0,   1,   1,   1 )
+#define MPP35_GE1_RXERR		MPP( 35, 0x3, 0, 0, 0,   1,   1,   1,   1 )
+#define MPP35_SATA0_ACTn	MPP( 35, 0x5, 0, 1, 0,   1,   1,   1,   1 )
+#define MPP35_LCD_D15		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+#define MPP35_MII0_RXERR	MPP( 35, 0xc, 1, 0, 1,   1,   1,   1,   1 )
+
+#define MPP36_GPIO		MPP( 36, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP36_TSMP0		MPP( 36, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP36_TDM_SPI_CS1	MPP( 36, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP36_AU_SPDIFI		MPP( 36, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP36_TW1_SDA		MPP( 36, 0xb, 1, 1, 0,   0,   0,   0,   1 )
+
+#define MPP37_GPIO		MPP( 37, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP37_TSMP1		MPP( 37, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP37_TDM_CH2_TX_QL	MPP( 37, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP37_AU_SPDIFO		MPP( 37, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP37_TW1_SCK		MPP( 37, 0xb, 1, 1, 0,   0,   0,   0,   1 )
+
+#define MPP38_GPIO		MPP( 38, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP38_TSMP2		MPP( 38, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP38_TDM_CH2_RX_QL	MPP( 38, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP38_AU_SPDIFRMLCLK	MPP( 38, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP38_LCD_D18		MPP( 38, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP39_GPIO		MPP( 39, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP39_TSMP3		MPP( 39, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP39_TDM_SPI_CS0	MPP( 39, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP39_AU_I2SBCLK	MPP( 39, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP39_LCD_D19		MPP( 39, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP40_GPIO		MPP( 40, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP40_TSMP4		MPP( 40, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP40_TDM_SPI_SCK	MPP( 40, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP40_AU_I2SDO		MPP( 40, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP40_LCD_D20		MPP( 40, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP41_GPIO		MPP( 41, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP41_TSMP5		MPP( 41, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP41_TDM_SPI_MISO	MPP( 41, 0x2, 1, 0, 0,   0,   0,   1,   1 )
+#define MPP41_AU_I2SLRCLK	MPP( 41, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP41_LCD_D21		MPP( 41, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP42_GPIO		MPP( 42, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP42_TSMP6		MPP( 42, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP42_TDM_SPI_MOSI	MPP( 42, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP42_AU_I2SMCLK	MPP( 42, 0x4, 0, 1, 1,   0,   0,   1,   1 )
+#define MPP42_LCD_D22		MPP( 42, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP43_GPIO		MPP( 43, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP43_TSMP7		MPP( 43, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP43_TDM_CODEC_INTn	MPP( 43, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP43_AU_I2SDI		MPP( 43, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP43_LCD_D23		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP44_GPIO		MPP( 44, 0x0, 1, 1, 1,   0,   0,   1,   1 )
+#define MPP44_TSMP8		MPP( 44, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP44_TDM_CODEC_RSTn	MPP( 44, 0x2, 0, 0, 0,   0,   0,   1,   1 )
+#define MPP44_AU_EXTCLK		MPP( 44, 0x4, 1, 0, 1,   0,   0,   1,   1 )
+#define MPP44_LCD_CLK		MPP( 44, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP45_GPIO		MPP( 45, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP45_TSMP9		MPP( 45, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP45_TDM_PCLK		MPP( 45, 0x2, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP245_LCD_E		MPP( 45, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP46_GPIO		MPP( 46, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_TSMP10		MPP( 46, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_TDM_FS		MPP( 46, 0x2, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP46_LCD_HSYNC		MPP( 46, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP47_GPIO		MPP( 47, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP47_TSMP11		MPP( 47, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP47_TDM_DRX		MPP( 47, 0x2, 1, 0, 0,   0,   0,   1,   1 )
+#define MPP47_LCD_VSYNC		MPP( 47, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1,   1 )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP48_LCD_D16		MPP( 22, 0xb, 0, 0, 0,   0,   0,   0,   1 )
+
+#define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1,   0 )
+#define MPP49_GPO		MPP( 49, 0x0, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1,   0 )
+#define MPP49_TDM_CH0_RX_QL	MPP( 49, 0x2, 0, 1, 0,   0,   0,   1,   1 )
+#define MPP49_PTP_CLK		MPP( 49, 0x5, 1, 0, 0,   0,   0,   1,   0 )
+#define MPP49_PEX0_CLKREQ	MPP( 49, 0xa, 0, 1, 0,   0,   0,   0,   1 )
+#define MPP49_LCD_D17		MPP( 49, 0xb, 0, 0, 0,   0,   0,   0,   1 )
 
 #define MPP_MAX			49
 
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 5e6f711b1c67..1e5266f57e2a 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -155,7 +155,7 @@ static void __init mv88f6281gtw_ge_init(void)
 static int __init mv88f6281gtw_ge_pci_init(void)
 {
 	if (machine_is_mv88f6281gtw_ge())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
@@ -163,8 +163,6 @@ subsys_initcall(mv88f6281gtw_ge_pci_init);
 
 MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= mv88f6281gtw_ge_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 3ae158d72681..5ea66f1f4178 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -24,55 +24,20 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
+#include <linux/gpio-fan.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <mach/kirkwood.h>
-#include <plat/time.h>
+#include <mach/leds-ns2.h>
 #include "common.h"
 #include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netspace_v2_flash_parts[] = {
-	{
-		.name = "u-boot",
-		.size = MTDPART_SIZ_FULL,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE, /* force read-only */
-	},
-};
-
-static const struct flash_platform_data netspace_v2_flash = {
-	.type		= "mx25l4005a",
-	.name		= "spi_flash",
-	.parts		= netspace_v2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(netspace_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &netspace_v2_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
+#include "lacie_v2-common.h"
 
 /*****************************************************************************
  * Ethernet
@@ -83,27 +48,6 @@ static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
 };
 
 /*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
-	.byte_len	= SZ_4K / 8,
-	.page_size	= 16,
-};
-
-/*
- * i2c addr | chip         | description
- * 0x50     | HT24LC04     | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netspace_v2_i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c04", 0x50),
-		.platform_data  = &at24c04,
-	}
-};
-
-/*****************************************************************************
  * SATA
  ****************************************************************************/
 
@@ -111,23 +55,6 @@ static struct mv_sata_platform_data netspace_v2_sata_data = {
 	.n_ports	= 2,
 };
 
-#define NETSPACE_V2_GPIO_SATA0_POWER	16
-#define NETSPACE_V2_GPIO_SATA1_POWER	17
-
-static void __init netspace_v2_sata_power_init(void)
-{
-	int err;
-
-	err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power");
-	if (err == 0) {
-		err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1);
-		if (err)
-			gpio_free(NETSPACE_V2_GPIO_SATA0_POWER);
-	}
-	if (err)
-		pr_err("netspace_v2: failed to setup SATA0 power\n");
-}
-
 /*****************************************************************************
  * GPIO keys
  ****************************************************************************/
@@ -160,36 +87,12 @@ static struct platform_device netspace_v2_gpio_buttons = {
  * GPIO LEDs
  ****************************************************************************/
 
-/*
- * The blue front LED is wired to a CPLD and can blink in relation with the
- * SATA activity.
- *
- * The following array detail the different LED registers and the combination
- * of their possible values:
- *
- *  cmd_led   |  slow_led  | /SATA active | LED state
- *            |            |              |
- *     1      |     0      |      x       |  off
- *     -      |     1      |      x       |  on
- *     0      |     0      |      1       |  on
- *     0      |     0      |      0       |  blink (rate 300ms)
- */
-
 #define NETSPACE_V2_GPIO_RED_LED	12
-#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
-#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
-
 
 static struct gpio_led netspace_v2_gpio_led_pins[] = {
 	{
-		.name			= "ns_v2:blue:sata",
-		.default_trigger	= "default-on",
-		.gpio			= NETSPACE_V2_GPIO_BLUE_LED_CMD,
-		.active_low		= 1,
-	},
-	{
-		.name			= "ns_v2:red:fail",
-		.gpio			= NETSPACE_V2_GPIO_RED_LED,
+		.name	= "ns_v2:red:fail",
+		.gpio	= NETSPACE_V2_GPIO_RED_LED,
 	},
 };
 
@@ -206,35 +109,72 @@ static struct platform_device netspace_v2_gpio_leds = {
 	},
 };
 
-static void __init netspace_v2_gpio_leds_init(void)
-{
-	int err;
-
-	/* Configure register slow_led to allow SATA activity LED blinking */
-	err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow");
-	if (err == 0) {
-		err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0);
-		if (err)
-			gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
-	}
-	if (err)
-		pr_err("netspace_v2: failed to configure blue LED slow GPIO\n");
+/*****************************************************************************
+ * Dual-GPIO CPLD LEDs
+ ****************************************************************************/
 
-	platform_device_register(&netspace_v2_gpio_leds);
-}
+#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
+#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
+
+static struct ns2_led netspace_v2_led_pins[] = {
+	{
+		.name	= "ns_v2:blue:sata",
+		.cmd	= NETSPACE_V2_GPIO_BLUE_LED_CMD,
+		.slow	= NETSPACE_V2_GPIO_BLUE_LED_SLOW,
+	},
+};
+
+static struct ns2_led_platform_data netspace_v2_leds_data = {
+	.num_leds	= ARRAY_SIZE(netspace_v2_led_pins),
+	.leds		= netspace_v2_led_pins,
+};
+
+static struct platform_device netspace_v2_leds = {
+	.name		= "leds-ns2",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &netspace_v2_leds_data,
+	},
+};
 
 /*****************************************************************************
- * Timer
+ * GPIO fan
  ****************************************************************************/
 
-static void netspace_v2_timer_init(void)
-{
-	kirkwood_tclk = 166666667;
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
+/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */
+static struct gpio_fan_speed netspace_max_v2_fan_speed[] = {
+	{    0,  0 },
+	{ 1500,	15 },
+	{ 1700,	14 },
+	{ 1800,	13 },
+	{ 2100,	12 },
+	{ 3100,	11 },
+	{ 3300,	10 },
+	{ 4300,	 9 },
+	{ 5500,	 8 },
+};
+
+static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 };
+
+static struct gpio_fan_alarm netspace_max_v2_fan_alarm = {
+	.gpio		= 25,
+	.active_low	= 1,
+};
 
-struct sys_timer netspace_v2_timer = {
-	.init = netspace_v2_timer_init,
+static struct gpio_fan_platform_data netspace_max_v2_fan_data = {
+	.num_ctrl	= ARRAY_SIZE(netspace_max_v2_fan_ctrl),
+	.ctrl		= netspace_max_v2_fan_ctrl,
+	.alarm		= &netspace_max_v2_fan_alarm,
+	.num_speed	= ARRAY_SIZE(netspace_max_v2_fan_speed),
+	.speed		= netspace_max_v2_fan_speed,
+};
+
+static struct platform_device netspace_max_v2_gpio_fan = {
+	.name	= "gpio-fan",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &netspace_max_v2_fan_data,
+	},
 };
 
 /*****************************************************************************
@@ -249,17 +189,21 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
 	MPP4_NF_IO6,
 	MPP5_NF_IO7,
 	MPP6_SYSRST_OUTn,
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP7_GPO,		/* Fan speed (bit 1) */
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP12_GPO,		/* Red led */
 	MPP14_GPIO,		/* USB fuse */
 	MPP16_GPIO,		/* SATA 0 power */
+	MPP17_GPIO,		/* SATA 1 power */
 	MPP18_NF_IO0,
 	MPP19_NF_IO1,
 	MPP20_SATA1_ACTn,
 	MPP21_SATA0_ACTn,
+	MPP22_GPIO,		/* Fan speed (bit 0) */
+	MPP23_GPIO,		/* Fan power */
 	MPP24_GPIO,		/* USB mode select */
 	MPP25_GPIO,		/* Fan rotation fail */
 	MPP26_GPIO,		/* USB device vbus */
@@ -268,6 +212,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
 	MPP30_GPIO,		/* Blue led (command register) */
 	MPP31_GPIO,		/* Board power off */
 	MPP32_GPIO, 		/* Power button (0 = Released, 1 = Pushed) */
+	MPP33_GPO,		/* Fan speed (bit 2) */
 	0
 };
 
@@ -286,21 +231,23 @@ static void __init netspace_v2_init(void)
 	kirkwood_init();
 	kirkwood_mpp_conf(netspace_v2_mpp_config);
 
-	netspace_v2_sata_power_init();
+	if (machine_is_netspace_max_v2())
+		lacie_v2_hdd_power_init(2);
+	else
+		lacie_v2_hdd_power_init(1);
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&netspace_v2_ge00_data);
 	kirkwood_sata_init(&netspace_v2_sata_data);
 	kirkwood_uart0_init();
-	spi_register_board_info(netspace_v2_spi_slave_info,
-				ARRAY_SIZE(netspace_v2_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, netspace_v2_i2c_info,
-				ARRAY_SIZE(netspace_v2_i2c_info));
-
-	netspace_v2_gpio_leds_init();
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
+
+	platform_device_register(&netspace_v2_leds);
+	platform_device_register(&netspace_v2_gpio_leds);
 	platform_device_register(&netspace_v2_gpio_buttons);
+	if (machine_is_netspace_max_v2())
+		platform_device_register(&netspace_max_v2_gpio_fan);
 
 	if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
 	    gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
@@ -311,24 +258,30 @@ static void __init netspace_v2_init(void)
 
 #ifdef CONFIG_MACH_NETSPACE_V2
 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netspace_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_INETSPACE_V2
 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netspace_v2_timer,
+	.timer		= &lacie_v2_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_NETSPACE_MAX_V2
+MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
+	.boot_params	= 0x00000100,
+	.init_machine	= netspace_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 8a2bb0228e4f..a1b45d501aef 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -23,55 +23,19 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <mach/kirkwood.h>
-#include <plat/time.h>
+#include <mach/leds-netxbig.h>
 #include "common.h"
 #include "mpp.h"
-
-/*****************************************************************************
- * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
- ****************************************************************************/
-
-static struct mtd_partition netxbig_v2_flash_parts[] = {
-	{
-		.name = "u-boot",
-		.size = MTDPART_SIZ_FULL,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE, /* force read-only */
-	},
-};
-
-static const struct flash_platform_data netxbig_v2_flash = {
-	.type		= "mx25l4005a",
-	.name		= "spi_flash",
-	.parts		= netxbig_v2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(netxbig_v2_flash_parts),
-};
-
-static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &netxbig_v2_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
+#include "lacie_v2-common.h"
 
 /*****************************************************************************
  * Ethernet
@@ -86,27 +50,6 @@ static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
 };
 
 /*****************************************************************************
- * I2C devices
- ****************************************************************************/
-
-static struct at24_platform_data at24c04 = {
-	.byte_len	= SZ_4K / 8,
-	.page_size	= 16,
-};
-
-/*
- * i2c addr | chip         | description
- * 0x50     | HT24LC04     | eeprom (512B)
- */
-
-static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c04", 0x50),
-		.platform_data  = &at24c04,
-	}
-};
-
-/*****************************************************************************
  * SATA
  ****************************************************************************/
 
@@ -114,34 +57,6 @@ static struct mv_sata_platform_data netxbig_v2_sata_data = {
 	.n_ports	= 2,
 };
 
-static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
-
-static void __init netxbig_v2_sata_power_init(void)
-{
-	int i;
-	int err;
-	int hdd_nb;
-
-	if (machine_is_net2big_v2())
-		hdd_nb = 2;
-	else
-		hdd_nb = 5;
-
-	/* Power up all hard disks. */
-	for (i = 0; i < hdd_nb; i++) {
-		err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL);
-		if (err == 0) {
-			err = gpio_direction_output(
-					netxbig_v2_gpio_hdd_power[i], 1);
-			/* Free the HDD power GPIOs. This allow user-space to
-			 * configure them via the gpiolib sysfs interface. */
-			gpio_free(netxbig_v2_gpio_hdd_power[i]);
-		}
-		if (err)
-			pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1);
-	}
-}
-
 /*****************************************************************************
  * GPIO keys
  ****************************************************************************/
@@ -190,7 +105,7 @@ static struct platform_device netxbig_v2_gpio_buttons = {
 };
 
 /*****************************************************************************
- * GPIO LEDs
+ * GPIO extension LEDs
  ****************************************************************************/
 
 /*
@@ -200,19 +115,32 @@ static struct platform_device netxbig_v2_gpio_buttons = {
  * - address register : bit [0-2] -> GPIO [47-49]
  * - data register    : bit [0-2] -> GPIO [44-46]
  * - enable register  : GPIO 29
- *
+ */
+
+static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
+static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
+
+static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
+	.addr		= netxbig_v2_gpio_ext_addr,
+	.num_addr	= ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
+	.data		= netxbig_v2_gpio_ext_data,
+	.num_data	= ARRAY_SIZE(netxbig_v2_gpio_ext_data),
+	.enable		= 29,
+};
+
+/*
  * Address register selection:
  *
  * addr | register
  * ----------------------------
  *   0  | front LED
  *   1  | front LED brightness
- *   2  | HDD LED brightness
- *   3  | HDD1 LED
- *   4  | HDD2 LED
- *   5  | HDD3 LED
- *   6  | HDD4 LED
- *   7  | HDD5 LED
+ *   2  | SATA LED brightness
+ *   3  | SATA0 LED
+ *   4  | SATA1 LED
+ *   5  | SATA2 LED
+ *   6  | SATA3 LED
+ *   7  | SATA4 LED
  *
  * Data register configuration:
  *
@@ -233,30 +161,107 @@ static struct platform_device netxbig_v2_gpio_buttons = {
  *   6  | blink blue on=1 sec and red on=1 sec
  *   7  | blink blue on=0.5 sec and blue off=2.5 sec
  *
- * data | HDD LED mode
+ * data | SATA LED mode
  * -------------------------------------------------
- *   0  | fix blue on
+ *   0  | fix off
  *   1  | SATA activity blink
  *   2  | fix red on
  *   3  | blink blue on=1 sec and blue off=1 sec
  *   4  | blink red on=1 sec and red off=1 sec
  *   5  | blink blue on=2.5 sec and red on=0.5 sec
  *   6  | blink blue on=1 sec and red on=1 sec
- *   7  | blink blue on=0.5 sec and blue off=2.5 sec
+ *   7  | fix blue on
  */
 
-/*****************************************************************************
- * Timer
- ****************************************************************************/
+static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
+	[NETXBIG_LED_OFF]	= 0,
+	[NETXBIG_LED_ON]	= 2,
+	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
+	[NETXBIG_LED_TIMER1]	= 4,
+	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
+};
 
-static void netxbig_v2_timer_init(void)
-{
-	kirkwood_tclk = 166666667;
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
+static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
+	[NETXBIG_LED_OFF]	= 0,
+	[NETXBIG_LED_ON]	= 1,
+	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
+	[NETXBIG_LED_TIMER1]	= 3,
+	[NETXBIG_LED_TIMER2]	= 7,
+};
+
+static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
+	[NETXBIG_LED_OFF]	= 0,
+	[NETXBIG_LED_ON]	= 7,
+	[NETXBIG_LED_SATA]	= 1,
+	[NETXBIG_LED_TIMER1]	= 3,
+	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
+};
+
+static struct netxbig_led_timer netxbig_v2_led_timer[] = {
+	[0] = {
+		.delay_on	= 500,
+		.delay_off	= 500,
+		.mode		= NETXBIG_LED_TIMER1,
+	},
+	[1] = {
+		.delay_on	= 500,
+		.delay_off	= 1000,
+		.mode		= NETXBIG_LED_TIMER2,
+	},
+};
+
+#define NETXBIG_LED(_name, maddr, mval, baddr)			\
+	{ .name		= _name,				\
+	  .mode_addr	= maddr,				\
+	  .mode_val	= mval,					\
+	  .bright_addr	= baddr }
+
+static struct netxbig_led net2big_v2_leds_ctrl[] = {
+	NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
+	NETXBIG_LED("net2big-v2:red:power",  0, netxbig_v2_red_mled,       1),
+	NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net2big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net2big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
+};
+
+static struct netxbig_led_platform_data net2big_v2_leds_data = {
+	.gpio_ext	= &netxbig_v2_gpio_ext,
+	.timer		= netxbig_v2_led_timer,
+	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
+	.leds		= net2big_v2_leds_ctrl,
+	.num_leds	= ARRAY_SIZE(net2big_v2_leds_ctrl),
+};
+
+static struct netxbig_led net5big_v2_leds_ctrl[] = {
+	NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
+	NETXBIG_LED("net5big-v2:red:power",  0, netxbig_v2_red_mled,       1),
+	NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata2",  5, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata3",  6, netxbig_v2_red_mled,       2),
+	NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
+	NETXBIG_LED("net5big-v2:red:sata5",  7, netxbig_v2_red_mled,       2),
+};
 
-struct sys_timer netxbig_v2_timer = {
-	.init = netxbig_v2_timer_init,
+static struct netxbig_led_platform_data net5big_v2_leds_data = {
+	.gpio_ext	= &netxbig_v2_gpio_ext,
+	.timer		= netxbig_v2_led_timer,
+	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
+	.leds		= net5big_v2_leds_ctrl,
+	.num_leds	= ARRAY_SIZE(net5big_v2_leds_ctrl),
+};
+
+static struct platform_device netxbig_v2_leds = {
+	.name		= "leds-netxbig",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &net2big_v2_leds_data,
+	},
 };
 
 /*****************************************************************************
@@ -270,8 +275,8 @@ static unsigned int net2big_v2_mpp_config[] __initdata = {
 	MPP3_SPI_MISO,
 	MPP6_SYSRST_OUTn,
 	MPP7_GPO,		/* Request power-off */
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_GPIO,		/* Rear power switch (on|auto) */
@@ -284,18 +289,18 @@ static unsigned int net2big_v2_mpp_config[] __initdata = {
 	MPP24_GPIO,		/* USB mode select */
 	MPP26_GPIO,		/* USB device vbus */
 	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* CPLD extension ALE */
+	MPP29_GPIO,		/* GPIO extension ALE */
 	MPP34_GPIO,		/* Rear Push button */
 	MPP35_GPIO,		/* Inhibit switch power-off */
 	MPP36_GPIO,		/* SATA HDD1 presence */
 	MPP37_GPIO,		/* SATA HDD2 presence */
 	MPP40_GPIO,		/* eSATA presence */
-	MPP44_GPIO,		/* CPLD extension (data 0) */
-	MPP45_GPIO,		/* CPLD extension (data 1) */
-	MPP46_GPIO,		/* CPLD extension (data 2) */
-	MPP47_GPIO,		/* CPLD extension (addr 0) */
-	MPP48_GPIO,		/* CPLD extension (addr 1) */
-	MPP49_GPIO,		/* CPLD extension (addr 2) */
+	MPP44_GPIO,		/* GPIO extension (data 0) */
+	MPP45_GPIO,		/* GPIO extension (data 1) */
+	MPP46_GPIO,		/* GPIO extension (data 2) */
+	MPP47_GPIO,		/* GPIO extension (addr 0) */
+	MPP48_GPIO,		/* GPIO extension (addr 1) */
+	MPP49_GPIO,		/* GPIO extension (addr 2) */
 	0
 };
 
@@ -306,8 +311,8 @@ static unsigned int net5big_v2_mpp_config[] __initdata = {
 	MPP3_SPI_MISO,
 	MPP6_SYSRST_OUTn,
 	MPP7_GPO,		/* Request power-off */
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_GPIO,		/* Rear power switch (on|auto) */
@@ -315,20 +320,20 @@ static unsigned int net5big_v2_mpp_config[] __initdata = {
 	MPP15_GPIO,		/* Rear power switch (auto|off) */
 	MPP16_GPIO,		/* SATA HDD1 power */
 	MPP17_GPIO,		/* SATA HDD2 power */
-	MPP20_GE1_0,
-	MPP21_GE1_1,
-	MPP22_GE1_2,
-	MPP23_GE1_3,
-	MPP24_GE1_4,
-	MPP25_GE1_5,
-	MPP26_GE1_6,
-	MPP27_GE1_7,
+	MPP20_GE1_TXD0,
+	MPP21_GE1_TXD1,
+	MPP22_GE1_TXD2,
+	MPP23_GE1_TXD3,
+	MPP24_GE1_RXD0,
+	MPP25_GE1_RXD1,
+	MPP26_GE1_RXD2,
+	MPP27_GE1_RXD3,
 	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* CPLD extension ALE */
-	MPP30_GE1_10,
-	MPP31_GE1_11,
-	MPP32_GE1_12,
-	MPP33_GE1_13,
+	MPP29_GPIO,		/* GPIO extension ALE */
+	MPP30_GE1_RXCTL,
+	MPP31_GE1_RXCLK,
+	MPP32_GE1_TCLKOUT,
+	MPP33_GE1_TXCTL,
 	MPP34_GPIO,		/* Rear Push button */
 	MPP35_GPIO,		/* Inhibit switch power-off */
 	MPP36_GPIO,		/* SATA HDD1 presence */
@@ -339,12 +344,12 @@ static unsigned int net5big_v2_mpp_config[] __initdata = {
 	MPP41_GPIO,		/* SATA HDD3 power */
 	MPP42_GPIO,		/* SATA HDD4 power */
 	MPP43_GPIO,		/* SATA HDD5 power */
-	MPP44_GPIO,		/* CPLD extension (data 0) */
-	MPP45_GPIO,		/* CPLD extension (data 1) */
-	MPP46_GPIO,		/* CPLD extension (data 2) */
-	MPP47_GPIO,		/* CPLD extension (addr 0) */
-	MPP48_GPIO,		/* CPLD extension (addr 1) */
-	MPP49_GPIO,		/* CPLD extension (addr 2) */
+	MPP44_GPIO,		/* GPIO extension (data 0) */
+	MPP45_GPIO,		/* GPIO extension (data 1) */
+	MPP46_GPIO,		/* GPIO extension (data 2) */
+	MPP47_GPIO,		/* GPIO extension (addr 0) */
+	MPP48_GPIO,		/* GPIO extension (addr 1) */
+	MPP49_GPIO,		/* GPIO extension (addr 2) */
 	0
 };
 
@@ -366,7 +371,10 @@ static void __init netxbig_v2_init(void)
 	else
 		kirkwood_mpp_conf(net5big_v2_mpp_config);
 
-	netxbig_v2_sata_power_init();
+	if (machine_is_net2big_v2())
+		lacie_v2_hdd_power_init(2);
+	else
+		lacie_v2_hdd_power_init(5);
 
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&netxbig_v2_ge00_data);
@@ -374,13 +382,12 @@ static void __init netxbig_v2_init(void)
 		kirkwood_ge01_init(&netxbig_v2_ge01_data);
 	kirkwood_sata_init(&netxbig_v2_sata_data);
 	kirkwood_uart0_init();
-	spi_register_board_info(netxbig_v2_spi_slave_info,
-				ARRAY_SIZE(netxbig_v2_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_i2c_init();
-	i2c_register_board_info(0, netxbig_v2_i2c_info,
-				ARRAY_SIZE(netxbig_v2_i2c_info));
+	lacie_v2_register_flash();
+	lacie_v2_register_i2c_devices();
 
+	if (machine_is_net5big_v2())
+		netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
+	platform_device_register(&netxbig_v2_leds);
 	platform_device_register(&netxbig_v2_gpio_buttons);
 
 	if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
@@ -392,24 +399,20 @@ static void __init netxbig_v2_init(void)
 
 #ifdef CONFIG_MACH_NET2BIG_V2
 MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netxbig_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_NET5BIG_V2
 MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &netxbig_v2_timer,
+	.timer		= &lacie_v2_timer,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index ad3f1ec33796..c9d77fad10ab 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-kirkwood/openrd-setup.c
  *
- * Marvell OpenRD (Base|Client) Board Setup
+ * Marvell OpenRD (Base|Client|Ultimate) Board Setup
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
@@ -15,6 +15,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -56,10 +58,93 @@ static struct mvsdio_platform_data openrd_mvsdio_data = {
 };
 
 static unsigned int openrd_mpp_config[] __initdata = {
+	MPP12_SD_CLK,
+	MPP13_SD_CMD,
+	MPP14_SD_D0,
+	MPP15_SD_D1,
+	MPP16_SD_D2,
+	MPP17_SD_D3,
+	MPP28_GPIO,
 	MPP29_GPIO,
+	MPP34_GPIO,
 	0
 };
 
+/* Configure MPP for UART1 */
+static unsigned int openrd_uart1_mpp_config[] __initdata = {
+	MPP13_UART1_TXD,
+	MPP14_UART1_RXD,
+	0
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("cs42l51", 0x4a),
+	},
+};
+
+static int __initdata uart1;
+
+static int __init sd_uart_selection(char *str)
+{
+	uart1 = -EINVAL;
+
+	/* Default is SD. Change if required, for UART */
+	if (!str)
+		return 0;
+
+	if (!strncmp(str, "232", 3)) {
+		uart1 = 232;
+	} else if (!strncmp(str, "485", 3)) {
+		/* OpenRD-Base doesn't have RS485. Treat is as an
+		 * unknown argument & just have default setting -
+		 * which is SD */
+		if (machine_is_openrd_base()) {
+			uart1 = -ENODEV;
+			return 1;
+		}
+
+		uart1 = 485;
+	}
+	return 1;
+}
+/* Parse boot_command_line string kw_openrd_init_uart1=232/485 */
+__setup("kw_openrd_init_uart1=", sd_uart_selection);
+
+static int __init uart1_mpp_config(void)
+{
+	kirkwood_mpp_conf(openrd_uart1_mpp_config);
+
+	if (gpio_request(34, "SD_UART1_SEL")) {
+		printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
+				", gpio: 34\n");
+		return -EIO;
+	}
+
+	if (gpio_request(28, "RS232_RS485_SEL")) {
+		printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
+				", gpio# 28\n");
+		gpio_free(34);
+		return -EIO;
+	}
+
+	/* Select UART1
+	 * Pin # 34: 0 => UART1, 1 => SD */
+	gpio_direction_output(34, 0);
+
+	/* Select RS232 OR RS485
+	 * Pin # 28: 0 => RS232, 1 => RS485 */
+	if (uart1 == 232)
+		gpio_direction_output(28, 0);
+	else
+		gpio_direction_output(28, 1);
+
+	gpio_free(34);
+	gpio_free(28);
+
+	return 0;
+}
+
 static void __init openrd_init(void)
 {
 	/*
@@ -73,19 +158,54 @@ static void __init openrd_init(void)
 
 	kirkwood_ehci_init();
 
+	if (machine_is_openrd_ultimate()) {
+		openrd_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+		openrd_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
+	}
+
 	kirkwood_ge00_init(&openrd_ge00_data);
-	if (machine_is_openrd_client())
+	if (!machine_is_openrd_base())
 		kirkwood_ge01_init(&openrd_ge01_data);
+
 	kirkwood_sata_init(&openrd_sata_data);
-	kirkwood_sdio_init(&openrd_mvsdio_data);
 
 	kirkwood_i2c_init();
+
+	if (machine_is_openrd_client()) {
+		i2c_register_board_info(0, i2c_board_info,
+			ARRAY_SIZE(i2c_board_info));
+		kirkwood_audio_init();
+	}
+
+	if (uart1 <= 0) {
+		if (uart1 < 0)
+			printk(KERN_ERR "Invalid kernel parameter to select "
+				"UART1. Defaulting to SD. ERROR CODE: %d\n",
+				uart1);
+
+		/* Select SD
+		 * Pin # 34: 0 => UART1, 1 => SD */
+		if (gpio_request(34, "SD_UART1_SEL")) {
+			printk(KERN_ERR "GPIO request failed for SD/UART1 "
+					"selection, gpio: 34\n");
+		} else {
+
+			gpio_direction_output(34, 1);
+			gpio_free(34);
+			kirkwood_sdio_init(&openrd_mvsdio_data);
+		}
+	} else {
+		if (!uart1_mpp_config())
+			kirkwood_uart1_init();
+	}
 }
 
 static int __init openrd_pci_init(void)
 {
-	if (machine_is_openrd_base() || machine_is_openrd_client())
-		kirkwood_pcie_init();
+	if (machine_is_openrd_base() ||
+	    machine_is_openrd_client() ||
+	    machine_is_openrd_ultimate())
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
@@ -94,8 +214,6 @@ subsys_initcall(openrd_pci_init);
 #ifdef CONFIG_MACH_OPENRD_BASE
 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
@@ -107,8 +225,17 @@ MACHINE_END
 #ifdef CONFIG_MACH_OPENRD_CLIENT
 MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_ULTIMATE
+MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
 	.boot_params	= 0x00000100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index dee1eff50d39..513ad3102d7c 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -18,29 +18,43 @@
 #include <mach/bridge-regs.h>
 #include "common.h"
 
+void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
+{
+	*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
+	*rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
+}
 
-#define PCIE_BASE	((void __iomem *)PCIE_VIRT_BASE)
+struct pcie_port {
+	u8			root_bus_nr;
+	void __iomem		*base;
+	spinlock_t		conf_lock;
+	int			irq;
+	struct resource		res[2];
+};
 
-void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
+static int pcie_port_map[2];
+static int num_pcie_ports;
+
+static inline struct pcie_port *bus_to_port(struct pci_bus *bus)
 {
-	*dev = orion_pcie_dev_id(PCIE_BASE);
-	*rev = orion_pcie_rev(PCIE_BASE);
+	struct pci_sys_data *sys = bus->sysdata;
+	return sys->private_data;
 }
 
-static int pcie_valid_config(int bus, int dev)
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
 {
 	/*
 	 * Don't go out when trying to access --
 	 * 1. nonexisting device on local bus
 	 * 2. where there's no device connected (no link)
 	 */
-	if (bus == 0 && dev == 0)
+	if (bus == pp->root_bus_nr && dev == 0)
 		return 1;
 
-	if (!orion_pcie_link_up(PCIE_BASE))
+	if (!orion_pcie_link_up(pp->base))
 		return 0;
 
-	if (bus == 0 && dev != 1)
+	if (bus == pp->root_bus_nr && dev != 1)
 		return 0;
 
 	return 1;
@@ -52,22 +66,22 @@ static int pcie_valid_config(int bus, int dev)
  * and then reading the PCIE_CONF_DATA register. Need to make sure these
  * transactions are atomic.
  */
-static DEFINE_SPINLOCK(kirkwood_pcie_lock);
 
 static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 			int size, u32 *val)
 {
+	struct pcie_port *pp = bus_to_port(bus);
 	unsigned long flags;
 	int ret;
 
-	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
 		*val = 0xffffffff;
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 
-	spin_lock_irqsave(&kirkwood_pcie_lock, flags);
-	ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
 
 	return ret;
 }
@@ -75,15 +89,16 @@ static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 			int where, int size, u32 val)
 {
+	struct pcie_port *pp = bus_to_port(bus);
 	unsigned long flags;
 	int ret;
 
-	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
-	spin_lock_irqsave(&kirkwood_pcie_lock, flags);
-	ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
-	spin_unlock_irqrestore(&kirkwood_pcie_lock, flags);
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
 
 	return ret;
 }
@@ -93,50 +108,98 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
-
-static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+static void __init pcie0_ioresources_init(struct pcie_port *pp)
 {
-	struct resource *res;
-	extern unsigned int kirkwood_clk_ctrl;
+	pp->base = (void __iomem *)PCIE_VIRT_BASE;
+	pp->irq	= IRQ_KIRKWOOD_PCIE;
 
 	/*
-	 * Generic PCIe unit setup.
+	 * IORESOURCE_IO
 	 */
-	orion_pcie_setup(PCIE_BASE, &kirkwood_mbus_dram_info);
+	pp->res[0].name = "PCIe 0 I/O Space";
+	pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
+	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
+	pp->res[0].flags = IORESOURCE_IO;
 
 	/*
-	 * Request resources.
+	 * IORESOURCE_MEM
 	 */
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("pcie_setup unable to alloc resources");
+	pp->res[1].name = "PCIe 0 MEM";
+	pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
+	pp->res[1].flags = IORESOURCE_MEM;
+}
+
+static void __init pcie1_ioresources_init(struct pcie_port *pp)
+{
+	pp->base = (void __iomem *)PCIE1_VIRT_BASE;
+	pp->irq	= IRQ_KIRKWOOD_PCIE1;
 
 	/*
 	 * IORESOURCE_IO
 	 */
-	res[0].name = "PCIe I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
-	res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
-	if (request_resource(&ioport_resource, &res[0]))
-		panic("Request PCIe IO resource failed\n");
-	sys->resource[0] = &res[0];
+	pp->res[0].name = "PCIe 1 I/O Space";
+	pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
+	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
+	pp->res[0].flags = IORESOURCE_IO;
 
 	/*
 	 * IORESOURCE_MEM
 	 */
-	res[1].name = "PCIe Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE;
-	res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
-	if (request_resource(&iomem_resource, &res[1]))
-		panic("Request PCIe Memory resource failed\n");
-	sys->resource[1] = &res[1];
+	pp->res[1].name = "PCIe 1 MEM";
+	pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
+	pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
+	pp->res[1].flags = IORESOURCE_MEM;
+}
+
+static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	extern unsigned int kirkwood_clk_ctrl;
+	struct pcie_port *pp;
+	int index;
 
+	if (nr >= num_pcie_ports)
+		return 0;
+
+	index = pcie_port_map[nr];
+	printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
+
+	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+	if (!pp)
+		panic("PCIe: failed to allocate pcie_port data");
+	sys->private_data = pp;
+	pp->root_bus_nr = sys->busnr;
+	spin_lock_init(&pp->conf_lock);
+
+	switch (index) {
+	case 0:
+		kirkwood_clk_ctrl |= CGC_PEX0;
+		pcie0_ioresources_init(pp);
+		break;
+	case 1:
+		kirkwood_clk_ctrl |= CGC_PEX1;
+		pcie1_ioresources_init(pp);
+		break;
+	default:
+		panic("PCIe setup: invalid controller %d", index);
+	}
+
+	if (request_resource(&ioport_resource, &pp->res[0]))
+		panic("Request PCIe%d IO resource failed\n", index);
+	if (request_resource(&iomem_resource, &pp->res[1]))
+		panic("Request PCIe%d Memory resource failed\n", index);
+
+	sys->resource[0] = &pp->res[0];
+	sys->resource[1] = &pp->res[1];
 	sys->resource[2] = NULL;
 	sys->io_offset = 0;
 
-	kirkwood_clk_ctrl |= CGC_PEX0;
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+	orion_pcie_setup(pp->base, &kirkwood_mbus_dram_info);
 
 	return 1;
 }
@@ -163,7 +226,7 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	struct pci_bus *bus;
 
-	if (nr == 0) {
+	if (nr < num_pcie_ports) {
 		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
 	} else {
 		bus = NULL;
@@ -175,18 +238,37 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 
 static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	return IRQ_KIRKWOOD_PCIE;
+	struct pcie_port *pp = bus_to_port(dev->bus);
+
+	return pp->irq;
 }
 
 static struct hw_pci kirkwood_pci __initdata = {
-	.nr_controllers	= 1,
 	.swizzle	= pci_std_swizzle,
 	.setup		= kirkwood_pcie_setup,
 	.scan		= kirkwood_pcie_scan_bus,
 	.map_irq	= kirkwood_pcie_map_irq,
 };
 
-void __init kirkwood_pcie_init(void)
+static void __init add_pcie_port(int index, unsigned long base)
 {
+	printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
+
+	if (orion_pcie_link_up((void __iomem *)base)) {
+		printk(KERN_INFO "link up\n");
+		pcie_port_map[num_pcie_ports++] = index;
+	} else
+		printk(KERN_INFO "link down, ignoring\n");
+}
+
+void __init kirkwood_pcie_init(unsigned int portmask)
+{
+	if (portmask & KW_PCIE0)
+		add_pcie_port(0, PCIE_VIRT_BASE);
+
+	if (portmask & KW_PCIE1)
+		add_pcie_port(1, PCIE1_VIRT_BASE);
+
+	kirkwood_pci.nr_controllers = num_pcie_ports;
 	pci_common_init(&kirkwood_pci);
 }
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 3bf6304158f6..0049614cd324 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -71,7 +71,7 @@ static void __init rd88f6192_init(void)
 static int __init rd88f6192_pci_init(void)
 {
 	if (machine_is_rd88f6192_nas())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
@@ -79,8 +79,6 @@ subsys_initcall(rd88f6192_pci_init);
 
 MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f6192_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 31708ddbc83e..0998a08cf42d 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -107,7 +107,7 @@ static void __init rd88f6281_init(void)
 static int __init rd88f6281_pci_init(void)
 {
 	if (machine_is_rd88f6281())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
 	return 0;
 }
@@ -115,8 +115,6 @@ subsys_initcall(rd88f6281_pci_init);
 
 MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f6281_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index a00879d34d54..d2eec35dfe0f 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -131,8 +131,6 @@ static void __init sheevaplug_init(void)
 #ifdef CONFIG_MACH_SHEEVAPLUG
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= sheevaplug_init,
 	.map_io		= kirkwood_map_io,
@@ -143,8 +141,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
 MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= sheevaplug_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
new file mode 100644
index 000000000000..ce50e61aac9f
--- /dev/null
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -0,0 +1,192 @@
+/*
+ *
+ * HP t5325 Thin Client setup
+ *
+ * Copyright (C) 2010  Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+struct mtd_partition hp_t5325_partitions[] = {
+	{
+		.name		= "u-boot env",
+		.size		= SZ_64K,
+		.offset		= SZ_512K + SZ_256K,
+	},
+	{
+		.name		= "permanent u-boot env",
+		.size		= SZ_64K,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "HP env",
+		.size		= SZ_64K,
+		.offset		= MTDPART_OFS_APPEND,
+	},
+	{
+		.name		= "u-boot",
+		.size		= SZ_512K,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "SSD firmware",
+		.size		= SZ_256K,
+		.offset		= SZ_512K,
+	},
+};
+
+const struct flash_platform_data hp_t5325_flash = {
+	.type		= "mx25l8005",
+	.name		= "spi_flash",
+	.parts		= hp_t5325_partitions,
+	.nr_parts	= ARRAY_SIZE(hp_t5325_partitions),
+};
+
+struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &hp_t5325_flash,
+		.irq		= -1,
+	},
+};
+
+static struct mv643xx_eth_platform_data hp_t5325_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data hp_t5325_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button hp_t5325_buttons[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= 45,
+		.desc		= "Power",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data hp_t5325_button_data = {
+	.buttons	= hp_t5325_buttons,
+	.nbuttons	= ARRAY_SIZE(hp_t5325_buttons),
+};
+
+static struct platform_device hp_t5325_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &hp_t5325_button_data,
+	}
+};
+
+static unsigned int hp_t5325_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP7_SPI_SCn,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_SD_CLK,
+	MPP13_GPIO,
+	MPP14_GPIO,
+	MPP15_GPIO,
+	MPP16_GPIO,
+	MPP17_GPIO,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP20_GPIO,
+	MPP21_GPIO,
+	MPP22_GPIO,
+	MPP23_GPIO,
+	MPP32_GPIO,
+	MPP33_GE1_TXCTL,
+	MPP39_AU_I2SBCLK,
+	MPP40_AU_I2SDO,
+	MPP41_AU_I2SLRCLK,
+	MPP42_AU_I2SMCLK,
+	MPP45_GPIO,		/* Power button */
+	MPP48_GPIO,		/* Board power off */
+	0
+};
+
+#define HP_T5325_GPIO_POWER_OFF		48
+
+static void hp_t5325_power_off(void)
+{
+	gpio_set_value(HP_T5325_GPIO_POWER_OFF, 1);
+}
+
+static void __init hp_t5325_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(hp_t5325_mpp_config);
+
+	kirkwood_uart0_init();
+	spi_register_board_info(hp_t5325_spi_slave_info,
+				ARRAY_SIZE(hp_t5325_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_i2c_init();
+	kirkwood_ge00_init(&hp_t5325_ge00_data);
+	kirkwood_sata_init(&hp_t5325_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&hp_t5325_button_device);
+
+	if (gpio_request(HP_T5325_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(HP_T5325_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = hp_t5325_power_off;
+	else
+		pr_err("t5325: failed to configure power-off GPIO\n");
+}
+
+static int __init hp_t5325_pci_init(void)
+{
+	if (machine_is_t5325())
+		kirkwood_pcie_init(KW_PCIE0);
+
+	return 0;
+}
+subsys_initcall(hp_t5325_pci_init);
+
+MACHINE_START(T5325, "HP t5325 Thin Client")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.boot_params	= 0x00000100,
+	.init_machine	= hp_t5325_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 2830f0fe80e0..6710bd7773b8 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -74,8 +74,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP3_SPI_MISO,
 	MPP4_SATA1_ACTn,
 	MPP5_SATA0_ACTn,
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_UART1_TXD,	/* PIC controller */
@@ -83,6 +83,7 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
 	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
+	MPP44_GPIO,		/* Board ID: 0: TS-11x, 1: TS-21x */
 	0
 };
 
@@ -110,17 +111,15 @@ static void __init qnap_ts219_init(void)
 
 static int __init ts219_pci_init(void)
 {
-   if (machine_is_ts219())
-           kirkwood_pcie_init();
+	if (machine_is_ts219())
+		kirkwood_pcie_init(KW_PCIE0);
 
-   return 0;
+	return 0;
 }
 subsys_initcall(ts219_pci_init);
 
 MACHINE_START(TS219, "QNAP TS-119/TS-219")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts219_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index de49c2d9e74b..8be09a0ce4ac 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -2,7 +2,7 @@
  *
  * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
  *
- * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2009-2010  Martin Michlmayr <tbm@cyrius.com>
  * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <asm/mach-types.h>
@@ -26,6 +27,8 @@
 #include "mpp.h"
 #include "tsx1x-common.h"
 
+#define QNAP_TS41X_JUMPER_JP1	45
+
 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
 };
@@ -78,31 +81,31 @@ static unsigned int qnap_ts41x_mpp_config[] __initdata = {
 	MPP3_SPI_MISO,
 	MPP6_SYSRST_OUTn,
 	MPP7_PEX_RST_OUTn,
-	MPP8_TW_SDA,
-	MPP9_TW_SCK,
+	MPP8_TW0_SDA,
+	MPP9_TW0_SCK,
 	MPP10_UART0_TXD,
 	MPP11_UART0_RXD,
 	MPP13_UART1_TXD,	/* PIC controller */
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_SATA0_ACTn,
 	MPP16_SATA1_ACTn,
-	MPP20_GE1_0,
-	MPP21_GE1_1,
-	MPP22_GE1_2,
-	MPP23_GE1_3,
-	MPP24_GE1_4,
-	MPP25_GE1_5,
-	MPP26_GE1_6,
-	MPP27_GE1_7,
-	MPP30_GE1_10,
-	MPP31_GE1_11,
-	MPP32_GE1_12,
-	MPP33_GE1_13,
+	MPP20_GE1_TXD0,
+	MPP21_GE1_TXD1,
+	MPP22_GE1_TXD2,
+	MPP23_GE1_TXD3,
+	MPP24_GE1_RXD0,
+	MPP25_GE1_RXD1,
+	MPP26_GE1_RXD2,
+	MPP27_GE1_RXD3,
+	MPP30_GE1_RXCTL,
+	MPP31_GE1_RXCLK,
+	MPP32_GE1_TCLKOUT,
+	MPP33_GE1_TXCTL,
 	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
 	MPP37_GPIO,		/* Reset button */
 	MPP43_GPIO,		/* USB Copy button */
 	MPP44_GPIO,		/* Board ID: 0: TS-419U, 1: TS-419 */
-	MPP45_GPIO,		/* JP1: 0: console, 1: LCD */
+	MPP45_GPIO,		/* JP1: 0: LCD, 1: serial console */
 	MPP46_GPIO,		/* External SATA HDD1 error indicator */
 	MPP47_GPIO,		/* External SATA HDD2 error indicator */
 	MPP48_GPIO,		/* External SATA HDD3 error indicator */
@@ -131,12 +134,14 @@ static void __init qnap_ts41x_init(void)
 
 	pm_power_off = qnap_tsx1x_power_off;
 
+	if (gpio_request(QNAP_TS41X_JUMPER_JP1, "JP1") == 0)
+		gpio_export(QNAP_TS41X_JUMPER_JP1, 0);
 }
 
 static int __init ts41x_pci_init(void)
 {
 	if (machine_is_ts41x())
-		kirkwood_pcie_init();
+		kirkwood_pcie_init(KW_PCIE0);
 
    return 0;
 }
@@ -144,8 +149,6 @@ subsys_initcall(ts41x_pci_init);
 
 MACHINE_START(TS41X, "QNAP TS-41x")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
-	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts41x_init,
 	.map_io		= kirkwood_map_io,
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 9e3e5a640ad2..3ca4f8e6f54f 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -223,8 +223,6 @@ static void __init acs5k_init(void)
 
 MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
 	/* Maintainer: Simtec Electronics. */
-	.phys_io	= KS8695_IO_PA,
-	.io_pg_offst	= (KS8695_IO_VA >> 18) & 0xfffc,
 	.boot_params	= KS8695_SDRAM_PA + 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index 521ff0789f39..ada92b6bed24 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -121,8 +121,6 @@ static void __init dsm320_init(void)
 
 MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
 	/* Maintainer: Simtec Electronics. */
-	.phys_io	= KS8695_IO_PA,
-	.io_pg_offst	= (KS8695_IO_VA >> 18) & 0xfffc,
 	.boot_params	= KS8695_SDRAM_PA + 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 8ceaf5ac6e2c..c7ad09bd6ea2 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -53,8 +53,6 @@ static void __init micrel_init(void)
 
 MACHINE_START(KS8695, "KS8695 Centaur Development Board")
 	/* Maintainer: Micrel Semiconductor Inc. */
-	.phys_io	= KS8695_IO_PA,
-	.io_pg_offst	= (KS8695_IO_VA >> 18) & 0xfffc,
 	.boot_params	= KS8695_SDRAM_PA + 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index cf2095da2372..bf516adf1925 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,11 +14,9 @@
 #include <mach/hardware.h>
 #include <mach/regs-uart.h>
 
-	.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =KS8695_UART_PA		@ physical base address
-		ldrne	\rx, =KS8695_UART_VA		@ virtual base address
+	.macro	addruart, rp, rv
+		ldr	\rp, =KS8695_UART_PA		@ physical base address
+		ldr	\rv, =KS8695_UART_VA		@ virtual base address
 	.endm
 
 	.macro	senduart, rd, rx
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index 78499667eb7b..5fcd082a17f9 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -268,8 +268,8 @@ static void __init ks8695_pci_preinit(void)
 	__raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC);
 
 	/* hook in fault handlers */
-	hook_fault_code(8, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
-	hook_fault_code(10, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
+	hook_fault_code(8, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
+	hook_fault_code(10, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
 }
 
 static void ks8695_show_pciregs(void)
diff --git a/arch/arm/mach-l7200/Makefile b/arch/arm/mach-l7200/Makefile
deleted file mode 100644
index 4bd8ebd70e7b..000000000000
--- a/arch/arm/mach-l7200/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			:= core.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
diff --git a/arch/arm/mach-l7200/Makefile.boot b/arch/arm/mach-l7200/Makefile.boot
deleted file mode 100644
index 6c72ecbe6b64..000000000000
--- a/arch/arm/mach-l7200/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	:= 0xf0008000
-
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
deleted file mode 100644
index 50d23246d4f0..000000000000
--- a/arch/arm/mach-l7200/core.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *  linux/arch/arm/mm/mm-lusl7200.c
- *
- *  Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- *  Extra MM routines for L7200 architecture
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-
-#include <asm/types.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-/*
- * IRQ base register
- */
-#define	IRQ_BASE	(IO_BASE_2 + 0x1000)
-
-/* 
- * Normal IRQ registers
- */
-#define IRQ_STATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x000))
-#define IRQ_RAWSTATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x004))
-#define IRQ_ENABLE	(*(volatile unsigned long *) (IRQ_BASE + 0x008))
-#define IRQ_ENABLECLEAR	(*(volatile unsigned long *) (IRQ_BASE + 0x00c))
-#define IRQ_SOFT	(*(volatile unsigned long *) (IRQ_BASE + 0x010))
-#define IRQ_SOURCESEL	(*(volatile unsigned long *) (IRQ_BASE + 0x018))
-
-/* 
- * Fast IRQ registers
- */
-#define FIQ_STATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x100))
-#define FIQ_RAWSTATUS	(*(volatile unsigned long *) (IRQ_BASE + 0x104))
-#define FIQ_ENABLE	(*(volatile unsigned long *) (IRQ_BASE + 0x108))
-#define FIQ_ENABLECLEAR	(*(volatile unsigned long *) (IRQ_BASE + 0x10c))
-#define FIQ_SOFT	(*(volatile unsigned long *) (IRQ_BASE + 0x110))
-#define FIQ_SOURCESEL	(*(volatile unsigned long *) (IRQ_BASE + 0x118))
-
-static void l7200_mask_irq(unsigned int irq)
-{
-	IRQ_ENABLECLEAR = 1 << irq;
-}
-
-static void l7200_unmask_irq(unsigned int irq)
-{
-	IRQ_ENABLE = 1 << irq;
-}
-
-static struct irq_chip l7200_irq_chip = {
-	.ack		= l7200_mask_irq,
-	.mask		= l7200_mask_irq,
-	.unmask		= l7200_unmask_irq
-};
- 
-static void __init l7200_init_irq(void)
-{
-	int irq;
-
-	IRQ_ENABLECLEAR = 0xffffffff;	/* clear all interrupt enables */
-	FIQ_ENABLECLEAR = 0xffffffff;	/* clear all fast interrupt enables */
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		set_irq_chip(irq, &l7200_irq_chip);
-		set_irq_flags(irq, IRQF_VALID);
-		set_irq_handler(irq, handle_level_irq);
-	}
-
-	init_FIQ();
-}
-
-static struct map_desc l7200_io_desc[] __initdata = {
-	{ IO_BASE,	IO_START,	IO_SIZE,	MT_DEVICE },
-	{ IO_BASE_2,	IO_START_2,	IO_SIZE_2,	MT_DEVICE },
-	{ AUX_BASE,     AUX_START,      AUX_SIZE,       MT_DEVICE },
-	{ FLASH1_BASE,  FLASH1_START,   FLASH1_SIZE,    MT_DEVICE },
-	{ FLASH2_BASE,  FLASH2_START,   FLASH2_SIZE,    MT_DEVICE }
-};
-
-static void __init l7200_map_io(void)
-{
-	iotable_init(l7200_io_desc, ARRAY_SIZE(l7200_io_desc));
-}
-
-MACHINE_START(L7200, "LinkUp Systems L7200")
-	/* Maintainer: Steve Hill / Scott McConnell */
-	.phys_io	= 0x80040000,
-	.io_pg_offst	= ((0xd0000000) >> 18) & 0xfffc,
-	.map_io		= l7200_map_io,
-	.init_irq	= l7200_init_irq,
-MACHINE_END
-
diff --git a/arch/arm/mach-l7200/include/mach/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h
deleted file mode 100644
index 4671558cdd51..000000000000
--- a/arch/arm/mach-l7200/include/mach/aux_reg.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/aux_reg.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   08-02-2000	SJH	Created file
- */
-#ifndef _ASM_ARCH_AUXREG_H
-#define _ASM_ARCH_AUXREG_H
-
-#include <mach/hardware.h>
-
-#define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
-
-/*
- * Auxillary register values
- */
-#define AUX_CLEAR		0x00000000
-#define AUX_DIAG_LED_ON		0x00000002
-#define AUX_RTS_UART1		0x00000004
-#define AUX_DTR_UART1		0x00000008
-#define AUX_KBD_COLUMN_12_HIGH	0x00000010
-#define AUX_KBD_COLUMN_12_OFF	0x00000020
-#define AUX_KBD_COLUMN_13_HIGH	0x00000040
-#define AUX_KBD_COLUMN_13_OFF	0x00000080
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index b69ed344c7c9..b0a2db77d392 100644
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,13 +14,11 @@
 		.equ	io_virt, IO_BASE
 		.equ	io_phys, IO_START
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #io_phys		@ physical base address
-		movne	\rx, #io_virt		@ virtual address
-		add	\rx, \rx, #0x00044000	@ UART1
-@		add	\rx, \rx, #0x00045000	@ UART2
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00044000	@ UART1
+@		mov	\rp, #0x00045000	@ UART2
+		add	\rv, \rp, #io_virt	@ virtual address
+		add	\rp, \rp, #io_phys	@ physical base address
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-l7200/include/mach/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S
deleted file mode 100644
index 1726d91fc1d3..000000000000
--- a/arch/arm/mach-l7200/include/mach/entry-macro.S
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for L7200-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.equ	irq_base_addr,	IO_BASE_2
-
-		.macro  disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
-		add	\irqstat, \irqstat, #0x00001000		@ Status reg
-		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
-		mov     \irqnr, #0
-1001:		tst     \irqstat, #1
-		addeq   \irqnr, \irqnr, #1
-		moveq   \irqstat, \irqstat, lsr #1
-		tsteq   \irqnr, #32
-		beq     1001b
-		teq     \irqnr, #32
-		.endm
-
diff --git a/arch/arm/mach-l7200/include/mach/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h
deleted file mode 100644
index 2b7086a26b81..000000000000
--- a/arch/arm/mach-l7200/include/mach/gp_timers.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/gp_timers.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   07-28-2000	SJH	Created file
- *   08-02-2000	SJH	Used structure for registers
- */
-#ifndef _ASM_ARCH_GPTIMERS_H
-#define _ASM_ARCH_GPTIMERS_H
-
-#include <mach/hardware.h>
-
-/*
- * Layout of L7200 general purpose timer registers
- */
-struct GPT_Regs {
-	unsigned int TIMERLOAD;
-	unsigned int TIMERVALUE;
-	unsigned int TIMERCONTROL;
-	unsigned int TIMERCLEAR;
-};
-
-#define GPT_BASE		(IO_BASE_2 + 0x3000)
-#define l7200_timer1_regs	((volatile struct GPT_Regs *) (GPT_BASE))
-#define l7200_timer2_regs	((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
-
-/*
- * General register values
- */
-#define	GPT_PRESCALE_1		0x00000000
-#define	GPT_PRESCALE_16		0x00000004
-#define	GPT_PRESCALE_256	0x00000008
-#define GPT_MODE_FREERUN	0x00000000
-#define GPT_MODE_PERIODIC	0x00000040
-#define GPT_ENABLE		0x00000080
-#define GPT_BZTOG		0x00000100
-#define GPT_BZMOD		0x00000200
-#define GPT_LOAD_MASK 		0x0000ffff
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h
deleted file mode 100644
index c7b0a5d7b8bb..000000000000
--- a/arch/arm/mach-l7200/include/mach/gpio.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/****************************************************************************/
-/*
- *      arch/arm/mach-l7200/include/mach/gpio.h
- *
- *      Registers and  helper functions for the L7200 Link-Up Systems
- *      GPIO.
- *
- *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
-#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
-
-/* Offsets from the start of the GPIO for all the registers. */
-#define PADR_OFF     0x000
-#define PADDR_OFF    0x004
-#define PASBSR_OFF   0x008
-#define PAEENR_OFF   0x00c
-#define PAESNR_OFF   0x010
-#define PAESTR_OFF   0x014
-#define PAIMR_OFF    0x018
-#define PAINT_OFF    0x01c
-
-#define PBDR_OFF     0x020
-#define PBDDR_OFF    0x024
-#define PBSBSR_OFF   0x028
-#define PBIMR_OFF    0x038
-#define PBINT_OFF    0x03c
-
-#define PCDR_OFF     0x040
-#define PCDDR_OFF    0x044
-#define PCSBSR_OFF   0x048
-#define PCIMR_OFF    0x058
-#define PCINT_OFF    0x05c
-
-#define PDDR_OFF     0x060
-#define PDDDR_OFF    0x064
-#define PDSBSR_OFF   0x068
-#define PDEENR_OFF   0x06c
-#define PDESNR_OFF   0x070
-#define PDESTR_OFF   0x074
-#define PDIMR_OFF    0x078
-#define PDINT_OFF    0x07c
-
-#define PEDR_OFF     0x080
-#define PEDDR_OFF    0x084
-#define PESBSR_OFF   0x088
-#define PEEENR_OFF   0x08c
-#define PEESNR_OFF   0x090
-#define PEESTR_OFF   0x094
-#define PEIMR_OFF    0x098
-#define PEINT_OFF    0x09c
-
-/* Define the GPIO registers for use by device drivers and the kernel. */
-#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
-#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
-#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
-#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
-#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
-#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
-#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
-#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
-
-#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
-#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
-#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
-#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
-#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
-
-#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
-#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
-#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
-#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
-#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
-
-#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
-#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
-#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
-#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
-#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
-#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
-#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
-#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
-
-#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
-#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
-#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
-#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
-#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
-#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
-#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
-#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
-
-#define VEE_EN         0x02
-#define BACKLIGHT_EN   0x04
diff --git a/arch/arm/mach-l7200/include/mach/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h
deleted file mode 100644
index c31909cfc254..000000000000
--- a/arch/arm/mach-l7200/include/mach/hardware.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/hardware.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * This file contains the hardware definitions for the 
- * LinkUp Systems L7200 SOC development board.
- *
- * Changelog:
- *   02-01-2000	 RS	Created L7200 version, derived from rpc code
- *   03-21-2000	SJH	Cleaned up file
- *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
- *   04-25-2000	SJH	Removed unused symbols and such
- *   05-05-2000	SJH	Complete rewrite
- *   07-31-2000	SJH	Added undocumented debug auxillary port to
- *			get at last two columns for keyboard driver
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Hardware addresses of major areas.
- *  *_START is the physical address
- *  *_SIZE  is the size of the region
- *  *_BASE  is the virtual address
- */
-#define RAM_START		0xf0000000
-#define RAM_SIZE		0x02000000
-#define RAM_BASE		0xc0000000
-
-#define IO_START		0x80000000      /* I/O */
-#define IO_SIZE			0x01000000
-#define IO_BASE			0xd0000000
-
-#define IO_START_2		0x90000000      /* I/O */
-#define IO_SIZE_2		0x01000000
-#define IO_BASE_2		0xd1000000
-
-#define AUX_START		0x1a000000      /* AUX PORT */
-#define AUX_SIZE 		0x01000000
-#define AUX_BASE		0xd2000000
-
-#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
-#define FLASH1_SIZE 		0x01000000
-#define FLASH1_BASE		0xd3000000
-
-#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
-#define FLASH2_SIZE 		0x01000000
-#define FLASH2_BASE		0xd4000000
-
-#define ISA_START		0x20000000	/* ISA */
-#define ISA_SIZE		0x20000000
-#define ISA_BASE		0xe0000000
-
-#define PCIO_BASE		IO_BASE
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h
deleted file mode 100644
index a770a89fb708..000000000000
--- a/arch/arm/mach-l7200/include/mach/io.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/io.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-21-2000	SJH	Created from arch/arm/mach-nexuspci/include/mach/io.h
- *  08-31-2000	SJH	Added in IO functions necessary for new drivers
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * There are not real ISA nor PCI buses, so we fake it.
- */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h
deleted file mode 100644
index 7edffd713c5b..000000000000
--- a/arch/arm/mach-l7200/include/mach/irqs.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/irqs.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000 RS	Create l7200 version
- *   03-28-2000 SJH	Removed unused interrupt
- *   07-28-2000 SJH	Added pseudo-keyboard interrupt
- */
-
-/*
- * NOTE: The second timer (Timer 2) is used as the keyboard
- *       interrupt when the keyboard driver is enabled.
- */
-
-#define NR_IRQS          32
-
-#define IRQ_STWDOG        0   /* Watchdog timer */
-#define IRQ_PROG          1   /* Programmable interrupt */
-#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
-#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
-#define IRQ_GCTC1         4   /* Timer 1 */
-#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
-#define IRQ_DMA           6   /* DMA controller */
-#define IRQ_CLCD          7   /* Color LCD controller */
-#define IRQ_SM_RX         8   /* Smart card */
-#define IRQ_SM_TX         9   /* Smart cart */
-#define IRQ_SM_RST       10   /* Smart card */
-#define IRQ_SIB          11   /* Serial Interface Bus */
-#define IRQ_MMC          12   /* MultiMediaCard */
-#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
-#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
-#define IRQ_SPI          15   /* SPI slave */
-#define IRQ_UART_1       16   /* UART 1 */
-#define IRQ_UART_2       17   /* UART 2 */
-#define IRQ_IRDA         18   /* IRDA */
-#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
-#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
-#define IRQ_GPIO         21   /* General Purpose IO */
-#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
-#define IRQ_M2M          23   /* Memory to memory DMA  */
-#define IRQ_RESERVED     24   /* RESERVED, don't use */
-#define IRQ_INTF         25   /* External active low interrupt */
-#define IRQ_INT0         26   /* External active low interrupt */
-#define IRQ_INT1         27   /* External active low interrupt */
-#define IRQ_INT2         28   /* External active low interrupt */
-#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
-#define IRQ_BAT_LO       30   /* Low batery or external power */
-#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
-
-/*
- * This is the offset of the FIQ "IRQ" numbers
- */
-#define FIQ_START	64
diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
deleted file mode 100644
index 9fb40ed2f03b..000000000000
--- a/arch/arm/mach-l7200/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/memory.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *
- * Changelog:
- *  03-13-2000	SJH	Created
- *  04-13-2000  RS      Changed bus macros for new addr
- *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset on the L7200 SDB.
- */
-#define PHYS_OFFSET     UL(0xf0000000)
-
-/*
- * Cache flushing area - ROM
- */
-#define FLUSH_BASE_PHYS		0x40000000
-#define FLUSH_BASE		0xdf000000
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h
deleted file mode 100644
index 3959871e8361..000000000000
--- a/arch/arm/mach-l7200/include/mach/pmpcon.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/pmpcon.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   DC/DC converter register.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMPCON_OFF 0x00006000  /* Offset from IO_START_2. */
-
-/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
-
-#define PMPCON_START (IO_START_2 + PMPCON_OFF)  /* Physical address of reg. */
-#define PMPCON_BASE  (IO_BASE_2  + PMPCON_OFF)  /* Virtual address of reg. */
-
-
-#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
-
-#define PWM2_50CYCLE 0x800
-#define CONTRAST     0x9
-
-#define PWM1H (CONTRAST)
-#define PWM1L (CONTRAST << 4)
-
-#define PMPCON_VALUE  (PWM2_50CYCLE | PWM1L | PWM1H) 
-	
-/* PMPCON = 0x811;   // too light and fuzzy
- * PMPCON = 0x844;   
- * PMPCON = 0x866;   // better color poor depth
- * PMPCON = 0x888;   // Darker but better depth 
- * PMPCON = 0x899;   // Darker even better depth
- * PMPCON = 0x8aa;   // too dark even better depth
- * PMPCON = 0X8cc;   // Way too dark
- */
-
-/* As CONTRAST value increases the greater the depth perception and
- * the darker the colors.
- */
diff --git a/arch/arm/mach-l7200/include/mach/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h
deleted file mode 100644
index a2da7aedf208..000000000000
--- a/arch/arm/mach-l7200/include/mach/pmu.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/pmu.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   Power Management Unit (PMU).
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define PMU_OFF   0x00050000  /* Offset from IO_START to the PMU registers. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define PMU_START (IO_START + PMU_OFF)  /* Physical addr. of the PMU reg. */
-#define PMU_BASE  (IO_BASE  + PMU_OFF)  /* Virtual addr. of the PMU reg. */
-
-
-/* Define the PMU registers for use by device drivers and the kernel. */
-
-typedef struct {
-     unsigned int CURRENT;  /* Current configuration register */
-     unsigned int NEXT;     /* Next configuration register */
-     unsigned int reserved;
-     unsigned int RUN;      /* Run configuration register */
-     unsigned int COMM;     /* Configuration command register */
-     unsigned int SDRAM;    /* SDRAM configuration bypass register */
-} pmu_interface;
-
-#define PMU ((volatile pmu_interface *)(PMU_BASE))
-
-
-/* Macro's for reading the common register fields. */
-
-#define GET_TRANSOP(reg)  ((reg >> 25) & 0x03) /* Bits 26-25 */
-#define GET_OSCEN(reg)    ((reg >> 16) & 0x01)
-#define GET_OSCMUX(reg)   ((reg >> 15) & 0x01)
-#define GET_PLLMUL(reg)   ((reg >>  9) & 0x3f) /* Bits 14-9 */
-#define GET_PLLEN(reg)    ((reg >>  8) & 0x01)
-#define GET_PLLMUX(reg)   ((reg >>  7) & 0x01)
-#define GET_BCLK_DIV(reg) ((reg >>  3) & 0x03) /* Bits 4-3 */
-#define GET_SDRB_SEL(reg) ((reg >>  2) & 0x01)
-#define GET_SDRF_SEL(reg) ((reg >>  1) & 0x01)
-#define GET_FASTBUS(reg)  (reg & 0x1)
-
-/* CFG_NEXT register */
-
-#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f)   /* Bits 24-18 */
-#define CFG_NEXT_INTRET        ((PMU->NEXT >> 17) & 0x01)
-#define CFG_NEXT_SDR_STOP      ((PMU->NEXT >>  6) & 0x01)
-#define CFG_NEXT_SYSCLKEN      ((PMU->NEXT >>  5) & 0x01)
-
-/* Useful field values that can be used to construct the
- * CFG_NEXT and CFG_RUN registers.
- */
-
-#define TRANSOP_NOP      0<<25  /* NOCHANGE_NOSTALL */
-#define NOCHANGE_STALL   1<<25
-#define CHANGE_NOSTALL   2<<25
-#define CHANGE_STALL     3<<25
-
-#define INTRET           1<<17
-#define OSCEN            1<<16
-#define OSCMUX           1<<15
-
-/* PLL frequencies */
-
-#define PLLMUL_0         0<<9         /*  3.6864 MHz */
-#define PLLMUL_1         1<<9         /*  ?????? MHz */
-#define PLLMUL_5         5<<9         /*  18.432 MHz */
-#define PLLMUL_10       10<<9         /*  36.864 MHz */
-#define PLLMUL_18       18<<9         /*  ?????? MHz */
-#define PLLMUL_20       20<<9         /*  73.728 MHz */
-#define PLLMUL_32       32<<9         /*  ?????? MHz */
-#define PLLMUL_35       35<<9         /* 129.024 MHz */
-#define PLLMUL_36       36<<9         /*  ?????? MHz */
-#define PLLMUL_39       39<<9         /*  ?????? MHz */
-#define PLLMUL_40       40<<9         /* 147.456 MHz */
-
-/* Clock recovery times */
-
-#define CRCLOCK_1        1<<18
-#define CRCLOCK_2        2<<18
-#define CRCLOCK_4        4<<18
-#define CRCLOCK_8        8<<18
-#define CRCLOCK_16      16<<18
-#define CRCLOCK_32      32<<18
-#define CRCLOCK_63      63<<18
-#define CRCLOCK_127    127<<18
-
-#define PLLEN            1<<8
-#define PLLMUX           1<<7
-#define SDR_STOP         1<<6
-#define SYSCLKEN         1<<5
-
-#define BCLK_DIV_4       2<<3
-#define BCLK_DIV_2       1<<3
-#define BCLK_DIV_1       0<<3
-
-#define SDRB_SEL         1<<2
-#define SDRF_SEL         1<<1
-#define FASTBUS          1<<0
-
-
-/* CFG_SDRAM */
-
-#define SDRREFFQ         1<<0  /* Only if SDRSTOPRQ is not set. */
-#define SDRREFACK        1<<1  /* Read-only */
-#define SDRSTOPRQ        1<<2  /* Only if SDRREFFQ is not set. */
-#define SDRSTOPACK       1<<3  /* Read-only */
-#define PICEN            1<<4  /* Enable Co-procesor */
-#define PICTEST          1<<5
-
-#define GET_SDRREFFQ    ((PMU->SDRAM >> 0) & 0x01)
-#define GET_SDRREFACK   ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
-#define GET_SDRSTOPRQ   ((PMU->SDRAM >> 2) & 0x01)
-#define GET_SDRSTOPACK  ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
-#define GET_PICEN       ((PMU->SDRAM >> 4) & 0x01)
-#define GET_PICTEST     ((PMU->SDRAM >> 5) & 0x01)
diff --git a/arch/arm/mach-l7200/include/mach/serial.h b/arch/arm/mach-l7200/include/mach/serial.h
deleted file mode 100644
index adc05e5f8378..000000000000
--- a/arch/arm/mach-l7200/include/mach/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/serial.h
- *
- * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  03-20-2000  SJH     Created
- *  03-26-2000  SJH     Added flags for serial ports
- *  03-27-2000  SJH     Corrected BASE_BAUD value
- *  04-14-2000  RS      Made register addr dependent on IO_BASE
- *  05-03-2000  SJH     Complete rewrite
- *  05-09-2000	SJH	Stripped out architecture specific serial stuff
- *                      and placed it in a separate file
- *  07-28-2000	SJH	Moved base baud rate variable
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD	3686400
-
-/*
- * Standard COM flags
- */
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define STD_SERIAL_PORT_DEFNS		\
-	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
-	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
-	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
-
-#define EXTRA_SERIAL_PORT_DEFNS
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
deleted file mode 100644
index 645f1c5e568d..000000000000
--- a/arch/arm/mach-l7200/include/mach/serial_l7200.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/serial_l7200.h
- *
- * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-09-2000	SJH	Created
- */
-#ifndef __ASM_ARCH_SERIAL_L7200_H
-#define __ASM_ARCH_SERIAL_L7200_H
-
-#include <mach/memory.h>
-
-/*
- * This assumes you have a 3.6864 MHz clock for your UART.
- */
-#define BASE_BAUD 3686400
-
-/*
- * UART base register addresses
- */
-#define UART1_BASE	(IO_BASE + 0x00044000)
-#define UART2_BASE	(IO_BASE + 0x00045000)
-
-/*
- * UART register offsets
- */
-#define UARTDR			0x00	/* Tx/Rx data */
-#define RXSTAT			0x04	/* Rx status */
-#define H_UBRLCR		0x08	/* mode register high */
-#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
-#define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
-#define UARTCON			0x14	/* control register */
-#define UARTFLG			0x18	/* flag register */
-#define UARTINTSTAT		0x1C	/* FIFO IRQ status register */
-#define UARTINTMASK		0x20	/* FIFO IRQ mask register */
-
-/*
- * UART baud rate register values
- */
-#define BR_110			0x827
-#define BR_1200			0x06e
-#define BR_2400			0x05f
-#define BR_4800			0x02f
-#define BR_9600			0x017
-#define BR_14400		0x00f
-#define BR_19200		0x00b
-#define BR_38400		0x005
-#define BR_57600		0x003
-#define BR_76800 		0x002
-#define BR_115200		0x001
-
-/*
- * Receiver status register (RXSTAT) mask values
- */
-#define RXSTAT_NO_ERR		0x00	/* No error */
-#define RXSTAT_FRM_ERR		0x01	/* Framing error */
-#define RXSTAT_PAR_ERR		0x02	/* Parity error */
-#define RXSTAT_OVR_ERR		0x04	/* Overrun error */
-
-/*
- * High byte of UART bit rate and line control register (H_UBRLCR) values
- */
-#define UBRLCR_BRK		0x01	/* generate break on tx */
-#define UBRLCR_PEN		0x02	/* enable parity */
-#define UBRLCR_PDIS		0x00	/* disable parity */
-#define UBRLCR_EVEN		0x04	/* 1= even parity,0 = odd parity */
-#define UBRLCR_STP2		0x08	/* transmit 2 stop bits */
-#define UBRLCR_FIFO		0x10	/* enable FIFO */
-#define UBRLCR_LEN5		0x60	/* word length5 */
-#define UBRLCR_LEN6		0x40	/* word length6 */
-#define UBRLCR_LEN7		0x20	/* word length7 */
-#define UBRLCR_LEN8		0x00	/* word length8 */
-
-/*
- * UART control register (UARTCON) values
- */
-#define UARTCON_UARTEN		0x01	/* Enable UART */
-#define UARTCON_DMAONERR	0x08	/* Mask RxDmaRq when errors occur */
-
-/*
- * UART flag register (UARTFLG) mask values
- */
-#define UARTFLG_UTXFF		0x20	/* Transmit FIFO full */
-#define UARTFLG_URXFE		0x10	/* Receiver FIFO empty */
-#define UARTFLG_UBUSY		0x08	/* Transmitter busy */
-#define UARTFLG_DCD		0x04	/* Data carrier detect */
-#define UARTFLG_DSR		0x02	/* Data set ready */
-#define UARTFLG_CTS		0x01	/* Clear to send */
-
-/*
- * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
- */
-#define UART_TXINT		0x01	/* TX interrupt */
-#define UART_RXINT		0x02	/* RX interrupt */
-#define UART_RXERRINT		0x04	/* RX error interrupt */
-#define UART_MSINT		0x08	/* Modem Status interrupt */
-#define UART_UDINT		0x10	/* UART Disabled interrupt */
-#define UART_ALLIRQS		0x1f	/* All interrupts */
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/sib.h b/arch/arm/mach-l7200/include/mach/sib.h
deleted file mode 100644
index 965728712cf3..000000000000
--- a/arch/arm/mach-l7200/include/mach/sib.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/sib.h
- *
- *  Registers and helper functions for the Serial Interface Bus.
- *
- *  (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SIB_OFF   0x00040000  /* Offset from IO_START to the SIB reg's. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
-#define SIB_BASE  (IO_BASE  + SIB_OFF) /* Virtual addr of the SIB reg.  */
-
-/* Offsets from the start of the SIB for all the registers. */
-
-/* Define the SIB registers for use by device drivers and the kernel. */
-
-typedef struct
-{
-     unsigned int MCCR;    /* SIB Control Register           Offset: 0x00 */
-     unsigned int RES1;    /* Reserved                       Offset: 0x04 */
-     unsigned int MCDR0;   /* SIB Data Register 0            Offset: 0x08 */
-     unsigned int MCDR1;   /* SIB Data Register 1            Offset: 0x0c */
-     unsigned int MCDR2;   /* SIB Data Register 2 (UCB1x00)  Offset: 0x10 */
-     unsigned int RES2;    /* Reserved                       Offset: 0x14 */
-     unsigned int MCSR;    /* SIB Status Register            Offset: 0x18 */
-} SIB_Interface;
-
-#define SIB ((volatile SIB_Interface *) (SIB_BASE))
-
-/* MCCR */
-
-#define INTERNAL_FREQ   9216000  /* Hertz */
-#define AUDIO_FREQ         5000  /* Hertz */
-#define TELECOM_FREQ       5000  /* Hertz */
-
-#define AUDIO_DIVIDE    (INTERNAL_FREQ / (32 * AUDIO_FREQ))
-#define TELECOM_DIVIDE  (INTERNAL_FREQ / (32 * TELECOM_FREQ))
-
-#define MCCR_ASD57      AUDIO_DIVIDE
-#define MCCR_TSD57      (TELECOM_DIVIDE << 8)
-#define MCCR_MCE        (1 << 16)             /* SIB enable */
-#define MCCR_ECS        (1 << 17)             /* External Clock Select */
-#define MCCR_ADM        (1 << 18)             /* A/D Data Sampling */
-#define MCCR_PMC        (1 << 26)             /* PIN Multiplexer Control */
-
-
-#define GET_ASD ((SIB->MCCR >>  0) & 0x3f) /* Audio Sample Rate Div. */
-#define GET_TSD ((SIB->MCCR >>  8) & 0x3f) /* Telcom Sample Rate Div. */
-#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
-#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
-#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
-#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ 
-#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
-#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ 
-#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
-#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
-#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
-#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
-#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
-#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
-
-/* MCDR0 */
-
-#define AUDIO_RECV     ((SIB->MCDR0 >> 4) & 0xfff)
-#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
-
-/* MCDR1 */
-
-#define TELECOM_RECV     ((SIB->MCDR1 >> 2) & 032fff)
-#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
-
-
-/* MCSR */
-
-#define MCSR_ATU (1 << 4)  /* Audio Transmit FIFO Underrun */
-#define MCSR_ARO (1 << 5)  /* Audio Receive  FIFO Underrun */
-#define MCSR_TTU (1 << 6)  /* TELECOM Transmit FIFO Underrun */
-#define MCSR_TRO (1 << 7)  /* TELECOM Receive  FIFO Underrun */
-
-#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
-
-
-#define GET_ATS ((SIB->MCSR >>  0) & 0x01) /* Audio Transmit FIFO Service Req*/
-#define GET_ARS ((SIB->MCSR >>  1) & 0x01) /* Audio Recv FIFO Service Request*/
-#define GET_TTS ((SIB->MCSR >>  2) & 0x01) /* TELECOM Transmit FIFO  Flag */
-#define GET_TRS ((SIB->MCSR >>  3) & 0x01) /* TELECOM Recv FIFO Service Req. */
-#define GET_ATU ((SIB->MCSR >>  4) & 0x01) /* Audio Transmit FIFO Underrun */
-#define GET_ARO ((SIB->MCSR >>  5) & 0x01) /* Audio Receive  FIFO Underrun */
-#define GET_TTU ((SIB->MCSR >>  6) & 0x01) /* TELECOM Transmit FIFO Underrun */
-#define GET_TRO ((SIB->MCSR >>  7) & 0x01) /* TELECOM Receive  FIFO Underrun */
-#define GET_ANF ((SIB->MCSR >>  8) & 0x01) /* Audio Transmit FIFO not full */
-#define GET_ANE ((SIB->MCSR >>  9) & 0x01) /* Audio Receive FIFO not empty */
-#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
-#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
-#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
-#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
-#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
-#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
-
-/* MCDR2 */
-
-#define MCDR2_rW               (1 << 16)
-
-#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
-#define MCDR2_WRITE_COMPLETE   GET_CWC
-
-#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
-#define MCDR2_READ_COMPLETE      GET_CRC
-#define MCDR2_READ               (SIB->MCDR2 & 0xffff)
diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
deleted file mode 100644
index e9729a35751d..000000000000
--- a/arch/arm/mach-l7200/include/mach/sys-clock.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/****************************************************************************/
-/*
- *  arch/arm/mach-l7200/include/mach/sys-clock.h
- *
- *   Registers and  helper functions for the L7200 Link-Up Systems
- *   System clocks.
- *
- *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License. See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-/****************************************************************************/
-
-#define SYS_CLOCK_OFF   0x00050030  /* Offset from IO_START. */
-
-/* IO_START and IO_BASE are defined in hardware.h */
-
-#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF)  /* Physical address */
-#define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
-
-/* Define the interface to the SYS_CLOCK */
-
-typedef struct
-{
-     unsigned int ENABLE;
-     unsigned int ESYNC;
-     unsigned int SELECT;
-} sys_clock_interface;
-
-#define SYS_CLOCK   ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
-
-//#define CLOCK_EN    (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
-//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
-//#define CLOCK_SEL   (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
-
-/* SYS_CLOCK -> ENABLE */
-
-#define SYN_EN          1<<0
-#define B18M_EN         1<<1
-#define CLK3M6_EN       1<<2
-#define BUART_EN        1<<3
-#define CLK18MU_EN      1<<4
-#define FIR_EN          1<<5
-#define MIRN_EN         1<<6
-#define UARTM_EN        1<<7
-#define SIBADC_EN       1<<8
-#define ALTD_EN         1<<9
-#define CLCLK_EN        1<<10
-
-/* SYS_CLOCK -> SELECT */
-
-#define CLK18M_DIV      1<<0
-#define MIR_SEL         1<<1
-#define SSP_SEL         1<<4
-#define MM_DIV          1<<5
-#define MM_SEL          1<<6
-#define ADC_SEL_2       0<<7
-#define ADC_SEL_4       1<<7
-#define ADC_SEL_8       3<<7
-#define ADC_SEL_16      7<<7
-#define ADC_SEL_32      0x0f<<7
-#define ADC_SEL_64      0x1f<<7
-#define ADC_SEL_128     0x3f<<7
-#define ALTD_SEL        1<<13
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
deleted file mode 100644
index e0dd3b6ae4aa..000000000000
--- a/arch/arm/mach-l7200/include/mach/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/system.h
- *
- * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog
- *  03-21-2000  SJH	Created
- *  04-26-2000  SJH	Fixed functions
- *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
- *  05-31-2000  SJH	Properly implemented 'arch_idle'
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-
-static inline void arch_idle(void)
-{
-	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		cpu_reset(0);
-	}
-}
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/time.h b/arch/arm/mach-l7200/include/mach/time.h
deleted file mode 100644
index 061771c2c2bd..000000000000
--- a/arch/arm/mach-l7200/include/mach/time.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/time.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *   01-02-2000	RS	Created l7200 version, derived from rpc code
- *   05-03-2000	SJH	Complete rewrite
- */
-#ifndef _ASM_ARCH_TIME_H
-#define _ASM_ARCH_TIME_H
-
-#include <mach/irqs.h>
-
-/*
- * RTC base register address
- */
-#define RTC_BASE	(IO_BASE_2 + 0x2000)
-
-/*
- * RTC registers
- */
-#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
-#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
-#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
-#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
-#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
-
-/*
- * RTCCR register values
- */
-#define RTC_RATE_32	0x00      /* 32 Hz tick */
-#define RTC_RATE_64	0x10      /* 64 Hz tick */
-#define RTC_RATE_128	0x20      /* 128 Hz tick */
-#define RTC_RATE_256	0x30      /* 256 Hz tick */
-#define RTC_EN_ALARM	0x01      /* Enable alarm */
-#define RTC_EN_TIC	0x04      /* Enable counter */
-#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
-
-/*
- * Handler for RTC timer interrupt
- */
-static irqreturn_t
-timer_interrupt(int irq, void *dev_id)
-{
-	struct pt_regs *regs = get_irq_regs();
-	do_timer(1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	do_profile(regs);
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up RTC timer interrupt, and return the current time in seconds.
- */
-void __init time_init(void)
-{
-	RTC_RTCC = 0;				/* Clear interrupt */
-
-	timer_irq.handler = timer_interrupt;
-
-	setup_irq(IRQ_RTC_TICK, &timer_irq);
-
-	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
-}
-
-#endif
diff --git a/arch/arm/mach-l7200/include/mach/timex.h b/arch/arm/mach-l7200/include/mach/timex.h
deleted file mode 100644
index ffc96a63b5a2..000000000000
--- a/arch/arm/mach-l7200/include/mach/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/timex.h
- *
- * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
- *                    Steve Hill (sjhill@cotw.com)
- *
- * 04-21-2000  RS Created file
- * 05-03-2000 SJH Tick rate was wrong
- *
- */
-
-/*
- * On the ARM720T, clock ticks are set to 128 Hz.
- *
- * NOTE: The actual RTC value is set in 'time.h' which
- *       must be changed when choosing a different tick
- *       rate. The value of HZ in 'param.h' must also
- *       be changed to match below.
- */
-#define CLOCK_TICK_RATE		128
diff --git a/arch/arm/mach-l7200/include/mach/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h
deleted file mode 100644
index 591c962bb315..000000000000
--- a/arch/arm/mach-l7200/include/mach/uncompress.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/uncompress.h
- *
- * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
- *
- * Changelog:
- *  05-01-2000	SJH	Created
- *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded baud rate
- */
-
-#include <mach/hardware.h>
-
-#define IO_UART  IO_START + 0x00044000
-
-#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
-#define __raw_readb(p)		(*(volatile unsigned char *)(p))
-
-static inline void putc(int c)
-{
-	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
-	      __raw_readb(IO_UART + 0x18) & 0x08)
-		barrier();
-
-	__raw_writeb(c, IO_UART + 0x00);
-}
-
-static inline void flush(void)
-{
-}
-
-static __inline__ void arch_decomp_setup(void)
-{
-	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
-	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
-	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
-}
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-l7200/include/mach/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h
deleted file mode 100644
index 85f0abbf15f1..000000000000
--- a/arch/arm/mach-l7200/include/mach/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * arch/arm/mach-l7200/include/mach/vmalloc.h
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 3d7bd50b9095..9088c16662e8 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -111,8 +111,6 @@ void __init lh7a40x_init_board_irq (void)
 
 MACHINE_START (KEV7A400, "Sharp KEV7a400")
 	/* Maintainer: Marc Singer */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= kev7a400_map_io,
 	.init_irq	= lh7a400_init_irq,
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index cb15e5d32120..7315a569aea1 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -398,8 +398,6 @@ lpd7a40x_map_io(void)
 
 MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10")
 	/* Maintainer: Marc Singer */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= lpd7a40x_map_io,
 	.init_irq	= lh7a400_init_irq,
@@ -413,8 +411,6 @@ MACHINE_END
 
 MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10")
 	/* Maintainer: Marc Singer */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((io_p2v (0x80000000))>>18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= lpd7a40x_map_io,
 	.init_irq	= lh7a404_init_irq,
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
index c0dcbbba22ba..cff33625276f 100644
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -14,12 +14,10 @@
 	@ It is not known if this will be appropriate for every 40x
 	@ board.
 
-		.macro  addruart, rx, tmp
-		mrc     p15, 0, \rx, c1, c0
-		tst     \rx, #1                 @ MMU enabled?
-		mov     \rx, #0x00000700        @ offset from base
-		orreq   \rx, \rx, #0x80000000   @ physical base
-		orrne   \rx, \rx, #0xf8000000   @ virtual base
+		.macro  addruart, rp, rv
+		mov     \rp, #0x00000700        @ offset from base
+		orr     \rv, \rp, #0xf8000000   @ virtual base
+		orr     \rp, \rp, #0x80000000   @ physical base
 		.endm
 
 		.macro  senduart,rd,rx
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
index 189d20e543e7..edb8f5faf5d5 100644
--- a/arch/arm/mach-lh7a40x/include/mach/memory.h
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -19,50 +19,6 @@
  */
 #define PHYS_OFFSET	UL(0xc0000000)
 
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define KVADDR_TO_NID(addr) \
-  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
-   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
-# else  /* 2 banks per node */
-#  define KVADDR_TO_NID(addr) \
-      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
-# endif
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define PFN_TO_NID(pfn) \
-  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
- | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
-# else  /* 2 banks per node */
-#  define PFN_TO_NID(pfn) \
-    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
-#endif
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
-# else  /* 2 banks per node */
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
-# endif
-
-#endif
-
 /*
  * Sparsemem version of the above
  */
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
index 3136c913a92c..cc90d99ac76c 100644
--- a/arch/arm/mach-loki/include/mach/debug-macro.S
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/loki.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =LOKI_REGS_PHYS_BASE
-	ldrne	\rx, =LOKI_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =LOKI_REGS_PHYS_BASE
+	ldr	\rv, =LOKI_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
index 85f9c1296aa0..a1e75e7fc500 100644
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -90,8 +90,6 @@ static void __init lb88rc8480_init(void)
 
 MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board")
 	/* Maintainer: Ke Wei <kewei@marvell.com> */
-	.phys_io	= LOKI_REGS_PHYS_BASE,
-	.io_pg_offst	= ((LOKI_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= lb88rc8480_init,
 	.map_io		= loki_map_io,
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
new file mode 100644
index 000000000000..fde663508696
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -0,0 +1,33 @@
+if ARCH_LPC32XX
+
+menu "Individual UART enable selections"
+
+config ARCH_LPC32XX_UART3_SELECT
+	bool "Add support for standard UART3"
+	help
+	 Adds support for standard UART 3 when the 8250 serial support
+	 is enabled.
+
+config ARCH_LPC32XX_UART4_SELECT
+	bool "Add support for standard UART4"
+	help
+	 Adds support for standard UART 4 when the 8250 serial support
+	 is enabled.
+
+config ARCH_LPC32XX_UART5_SELECT
+	bool "Add support for standard UART5"
+	default y
+	help
+	 Adds support for standard UART 5 when the 8250 serial support
+	 is enabled.
+
+config ARCH_LPC32XX_UART6_SELECT
+	bool "Add support for standard UART6"
+	help
+	 Adds support for standard UART 6 when the 8250 serial support
+	 is enabled.
+
+endmenu
+
+endif
+
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
new file mode 100644
index 000000000000..a5fc5d0eeaeb
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y	:= timer.o irq.o common.o serial.o clock.o
+obj-y	+= gpiolib.o pm.o suspend.o
+obj-y	+= phy3250.o
+
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
new file mode 100644
index 000000000000..b796b41ebf8f
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x80008000
+params_phys-y	:= 0x80000100
+initrd_phys-y	:= 0x82000000
+
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
new file mode 100644
index 000000000000..32d63796430a
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -0,0 +1,1137 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * LPC32xx clock management driver overview
+ *
+ * The LPC32XX contains a number of high level system clocks that can be
+ * generated from different sources. These system clocks are used to
+ * generate the CPU and bus rates and the individual peripheral clocks in
+ * the system. When Linux is started by the boot loader, the system
+ * clocks are already running. Stopping a system clock during normal
+ * Linux operation should never be attempted, as peripherals that require
+ * those clocks will quit working (ie, DRAM).
+ *
+ * The LPC32xx high level clock tree looks as follows. Clocks marked with
+ * an asterisk are always on and cannot be disabled. Clocks marked with
+ * an ampersand can only be disabled in CPU suspend mode. Clocks marked
+ * with a caret are always on if it is the selected clock for the SYSCLK
+ * source. The clock that isn't used for SYSCLK can be enabled and
+ * disabled normally.
+ *                               32KHz oscillator*
+ *                               /      |      \
+ *                             RTC*   PLL397^ TOUCH
+ *                                     /
+ *               Main oscillator^     /
+ *                   |        \      /
+ *                   |         SYSCLK&
+ *                   |            \
+ *                   |             \
+ *                USB_PLL       HCLK_PLL&
+ *                   |           |    |
+ *            USB host/device  PCLK&  |
+ *                               |    |
+ *                             Peripherals
+ *
+ * The CPU and chip bus rates are derived from the HCLK PLL, which can
+ * generate various clock rates up to 266MHz and beyond. The internal bus
+ * rates (PCLK and HCLK) are generated from dividers based on the HCLK
+ * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
+ * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
+ * level clocks are based on either HCLK or PCLK, but have their own
+ * dividers as part of the IP itself. Because of this, the system clock
+ * rates should not be changed.
+ *
+ * The HCLK PLL is clocked from SYSCLK, which can be derived from the
+ * main oscillator or PLL397. PLL397 generates a rate that is 397 times
+ * the 32KHz oscillator rate. The main oscillator runs at the selected
+ * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
+ * is normally 13MHz, but depends on the selection of external crystals
+ * or oscillators. If USB operation is required, the main oscillator must
+ * be used in the system.
+ *
+ * Switching SYSCLK between sources during normal Linux operation is not
+ * supported. SYSCLK is preset in the bootloader. Because of the
+ * complexities of clock management during clock frequency changes,
+ * there are some limitations to the clock driver explained below:
+ * - The PLL397 and main oscillator can be enabled and disabled by the
+ *   clk_enable() and clk_disable() functions unless SYSCLK is based
+ *   on that clock. This allows the other oscillator that isn't driving
+ *   the HCLK PLL to be used as another system clock that can be routed
+ *   to an external pin.
+ * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
+ *   this driver.
+ * - HCLK and PCLK rates cannot be changed as part of this driver.
+ * - Most peripherals have their own dividers are part of the peripheral
+ *   block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
+ *   will also impact the individual peripheral rates.
+ */
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <mach/clkdev.h>
+#include <mach/platform.h>
+#include "clock.h"
+#include "common.h"
+
+static struct clk clk_armpll;
+static struct clk clk_usbpll;
+static DEFINE_MUTEX(clkm_lock);
+
+/*
+ * Post divider values for PLLs based on selected register value
+ */
+static const u32 pll_postdivs[4] = {1, 2, 4, 8};
+
+static unsigned long local_return_parent_rate(struct clk *clk)
+{
+	/*
+	 * If a clock has a rate of 0, then it inherits it's parent
+	 * clock rate
+	 */
+	while (clk->rate == 0)
+		clk = clk->parent;
+
+	return clk->rate;
+}
+
+/* 32KHz clock has a fixed rate and is not stoppable */
+static struct clk osc_32KHz = {
+	.rate		= LPC32XX_CLOCK_OSC_FREQ,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int local_pll397_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
+
+	if (enable == 0) {
+		reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
+		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
+	} else {
+		/* Enable PLL397 */
+		reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
+		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
+
+		/* Wait for PLL397 lock */
+		while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
+			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
+			(timeout > jiffies))
+			cpu_relax();
+
+		if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
+			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0)
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int local_oscmain_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+
+	if (enable == 0) {
+		reg |= LPC32XX_CLKPWR_MOSC_DISABLE;
+		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+	} else {
+		/* Enable main oscillator */
+		reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE;
+		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
+
+		/* Wait for main oscillator to start */
+		while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
+			LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
+			(timeout > jiffies))
+			cpu_relax();
+
+		if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
+			LPC32XX_CLKPWR_MOSC_DISABLE) != 0)
+			return -ENODEV;
+	}
+
+	return 0;
+}
+
+static struct clk osc_pll397 = {
+	.parent		= &osc_32KHz,
+	.enable		= local_pll397_enable,
+	.rate		= LPC32XX_CLOCK_OSC_FREQ * 397,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk osc_main = {
+	.enable		= local_oscmain_enable,
+	.rate		= LPC32XX_MAIN_OSC_FREQ,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_sys;
+
+/*
+ * Convert a PLL register value to a PLL output frequency
+ */
+u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval)
+{
+	struct clk_pll_setup pllcfg;
+
+	pllcfg.cco_bypass_b15 = 0;
+	pllcfg.direct_output_b14 = 0;
+	pllcfg.fdbk_div_ctrl_b13 = 0;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0)
+		pllcfg.cco_bypass_b15 = 1;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0)
+		pllcfg.direct_output_b14 = 1;
+	if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0)
+		pllcfg.fdbk_div_ctrl_b13 = 1;
+	pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF);
+	pllcfg.pll_n = 1 + ((regval >> 9) & 0x3);
+	pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)];
+
+	return clk_check_pll_setup(inputclk, &pllcfg);
+}
+
+/*
+ * Setup the HCLK PLL with a PLL structure
+ */
+static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
+{
+	u32 tv, tmp = 0;
+
+	if (PllSetup->analog_on != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP;
+	if (PllSetup->cco_bypass_b15 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS;
+	if (PllSetup->direct_output_b14 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS;
+	if (PllSetup->fdbk_div_ctrl_b13 != 0)
+		tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
+
+	tv = ffs(PllSetup->pll_p) - 1;
+	if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3))
+		return 0;
+
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
+	tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
+
+	return tmp;
+}
+
+/*
+ * Update the ARM core PLL frequency rate variable from the actual PLL setting
+ */
+static void local_update_armpll_rate(void)
+{
+	u32 clkin, pllreg;
+
+	clkin = clk_armpll.parent->rate;
+	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
+
+	clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
+}
+
+/*
+ * Find a PLL configuration for the selected input frequency
+ */
+static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
+	struct clk_pll_setup *pllsetup)
+{
+	u32 ifreq, freqtol, m, n, p, fclkout;
+
+	/* Determine frequency tolerance limits */
+	freqtol = target_freq / 250;
+	ifreq = pllin_freq;
+
+	/* Is direct bypass mode possible? */
+	if (abs(pllin_freq - target_freq) <= freqtol) {
+		pllsetup->analog_on = 0;
+		pllsetup->cco_bypass_b15 = 1;
+		pllsetup->direct_output_b14 = 1;
+		pllsetup->fdbk_div_ctrl_b13 = 1;
+		pllsetup->pll_p = pll_postdivs[0];
+		pllsetup->pll_n = 1;
+		pllsetup->pll_m = 1;
+		return clk_check_pll_setup(ifreq, pllsetup);
+	} else if (target_freq <= ifreq) {
+		pllsetup->analog_on = 0;
+		pllsetup->cco_bypass_b15 = 1;
+		pllsetup->direct_output_b14 = 0;
+		pllsetup->fdbk_div_ctrl_b13 = 1;
+		pllsetup->pll_n = 1;
+		pllsetup->pll_m = 1;
+		for (p = 0; p <= 3; p++) {
+			pllsetup->pll_p = pll_postdivs[p];
+			fclkout = clk_check_pll_setup(ifreq, pllsetup);
+			if (abs(target_freq - fclkout) <= freqtol)
+				return fclkout;
+		}
+	}
+
+	/* Is direct mode possible? */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 1;
+	pllsetup->fdbk_div_ctrl_b13 = 0;
+	pllsetup->pll_p = pll_postdivs[0];
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			/* Compute output frequency for this value */
+			pllsetup->pll_n = n;
+			pllsetup->pll_m = m;
+			fclkout = clk_check_pll_setup(ifreq,
+				pllsetup);
+			if (abs(target_freq - fclkout) <=
+				freqtol)
+				return fclkout;
+		}
+	}
+
+	/* Is integer mode possible? */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 0;
+	pllsetup->fdbk_div_ctrl_b13 = 1;
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			for (p = 0; p < 4; p++) {
+				/* Compute output frequency */
+				pllsetup->pll_p = pll_postdivs[p];
+				pllsetup->pll_n = n;
+				pllsetup->pll_m = m;
+				fclkout = clk_check_pll_setup(
+					ifreq, pllsetup);
+				if (abs(target_freq - fclkout) <= freqtol)
+					return fclkout;
+			}
+		}
+	}
+
+	/* Try non-integer mode */
+	pllsetup->analog_on = 1;
+	pllsetup->cco_bypass_b15 = 0;
+	pllsetup->direct_output_b14 = 0;
+	pllsetup->fdbk_div_ctrl_b13 = 0;
+	for (m = 1; m <= 256; m++) {
+		for (n = 1; n <= 4; n++) {
+			for (p = 0; p < 4; p++) {
+				/* Compute output frequency */
+				pllsetup->pll_p = pll_postdivs[p];
+				pllsetup->pll_n = n;
+				pllsetup->pll_m = m;
+				fclkout = clk_check_pll_setup(
+					ifreq, pllsetup);
+				if (abs(target_freq - fclkout) <= freqtol)
+					return fclkout;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static struct clk clk_armpll = {
+	.parent		= &clk_sys,
+	.get_rate	= local_return_parent_rate,
+};
+
+/*
+ * Setup the USB PLL with a PLL structure
+ */
+static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
+{
+	u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF;
+	reg |= tmp;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	return clk_check_pll_setup(clk_usbpll.parent->rate,
+		pHCLKPllSetup);
+}
+
+static int local_usbpll_enable(struct clk *clk, int enable)
+{
+	u32 reg;
+	int ret = -ENODEV;
+	unsigned long timeout = 1 + msecs_to_jiffies(10);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+
+	if (enable == 0) {
+		reg &= ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
+			LPC32XX_CLKPWR_USBCTRL_CLK_EN2);
+		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+	} else if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP) {
+		reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
+		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+		/* Wait for PLL lock */
+		while ((timeout > jiffies) & (ret == -ENODEV)) {
+			reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+			if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
+				ret = 0;
+		}
+
+		if (ret == 0) {
+			reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+			__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+		}
+	}
+
+	return ret;
+}
+
+static unsigned long local_usbpll_round_rate(struct clk *clk,
+	unsigned long rate)
+{
+	u32 clkin, usbdiv;
+	struct clk_pll_setup pllsetup;
+
+	/*
+	 * Unlike other clocks, this clock has a KHz input rate, so bump
+	 * it up to work with the PLL function
+	 */
+	rate = rate * 1000;
+
+	clkin = clk->parent->rate;
+	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
+		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
+	clkin = clkin / usbdiv;
+
+	/* Try to find a good rate setup */
+	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
+		return 0;
+
+	return clk_check_pll_setup(clkin, &pllsetup);
+}
+
+static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 clkin, reg, usbdiv;
+	struct clk_pll_setup pllsetup;
+
+	/*
+	 * Unlike other clocks, this clock has a KHz input rate, so bump
+	 * it up to work with the PLL function
+	 */
+	rate = rate * 1000;
+
+	clkin = clk->get_rate(clk);
+	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
+		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
+	clkin = clkin / usbdiv;
+
+	/* Try to find a good rate setup */
+	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
+		return -EINVAL;
+
+	local_usbpll_enable(clk, 0);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	pllsetup.analog_on = 1;
+	local_clk_usbpll_setup(&pllsetup);
+
+	clk->rate = clk_check_pll_setup(clkin, &pllsetup);
+
+	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
+	reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN2;
+	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
+
+	return 0;
+}
+
+static struct clk clk_usbpll = {
+	.parent		= &osc_main,
+	.set_rate	= local_usbpll_set_rate,
+	.enable		= local_usbpll_enable,
+	.rate		= 48000, /* In KHz */
+	.get_rate	= local_return_parent_rate,
+	.round_rate	= local_usbpll_round_rate,
+};
+
+static u32 clk_get_hclk_div(void)
+{
+	static const u32 hclkdivs[4] = {1, 2, 4, 4};
+	return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(
+		__raw_readl(LPC32XX_CLKPWR_HCLK_DIV))];
+}
+
+static struct clk clk_hclk = {
+	.parent		= &clk_armpll,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_pclk = {
+	.parent		= &clk_armpll,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int local_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(clk->enable_reg);
+
+	if (enable == 0)
+		tmp &= ~clk->enable_mask;
+	else
+		tmp |= clk->enable_mask;
+
+	__raw_writel(tmp, clk->enable_reg);
+
+	return 0;
+}
+
+/* Peripheral clock sources */
+static struct clk clk_timer0 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer1 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer2 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_timer3 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
+	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_wdt = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_TIMER_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_vfp9 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_DEBUG_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT,
+	.get_rate	= local_return_parent_rate,
+};
+static struct clk clk_dma = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_DMA_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart3 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart4 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart5 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_uart6 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2c2 = {
+	.parent		= &clk_pclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= io_p2v(LPC32XX_USB_BASE + 0xFF4),
+	.enable_mask	= 0x4,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_ssp0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_ssp1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_kscan = {
+	.parent		= &osc_32KHz,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_KEY_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_nand = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_NAND_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2s0 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_i2s1 = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_net = {
+	.parent		= &clk_hclk,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_MACCLK_CTRL,
+	.enable_mask	= (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN |
+		LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN |
+		LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN),
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_rtc = {
+	.parent		= &osc_32KHz,
+	.rate		= 1, /* 1 Hz */
+	.get_rate	= local_return_parent_rate,
+};
+
+static struct clk clk_usbd = {
+	.parent		= &clk_usbpll,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_USB_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int tsc_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	/* Make sure 32KHz clock is the selected clock */
+	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+	tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
+	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
+
+	if (enable == 0)
+		__raw_writel(0, clk->enable_reg);
+	else
+		__raw_writel(clk->enable_mask, clk->enable_reg);
+
+	return 0;
+}
+
+static struct clk clk_tsc = {
+	.parent		= &osc_32KHz,
+	.enable		= tsc_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
+	.get_rate	= local_return_parent_rate,
+};
+
+static int mmc_onoff_enable(struct clk *clk, int enable)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
+		~LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+
+	/* If rate is 0, disable clock */
+	if (enable != 0)
+		tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
+
+	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
+
+	return 0;
+}
+
+static unsigned long mmc_get_rate(struct clk *clk)
+{
+	u32 div, rate, oldclk;
+
+	/* The MMC clock must be on when accessing an MMC register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+		LPC32XX_CLKPWR_MS_CTRL);
+	div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
+
+	/* Get the parent clock rate */
+	rate = clk->parent->get_rate(clk->parent);
+
+	/* Get the MMC controller clock divider value */
+	div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
+
+	if (!div)
+		div = 1;
+
+	return rate / div;
+}
+
+static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long div, prate;
+
+	/* Get the parent clock rate */
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate >= prate)
+		return prate;
+
+	div = prate / rate;
+	if (div > 0xf)
+		div = 0xf;
+
+	return prate / div;
+}
+
+static int mmc_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 oldclk, tmp;
+	unsigned long prate, div, crate = mmc_round_rate(clk, rate);
+
+	prate = clk->parent->get_rate(clk->parent);
+
+	div = prate / crate;
+
+	/* The MMC clock must be on when accessing an MMC register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+		LPC32XX_CLKPWR_MS_CTRL);
+	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
+		~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
+	tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div);
+	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
+
+	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
+
+	return 0;
+}
+
+static struct clk clk_mmc = {
+	.parent		= &clk_armpll,
+	.set_rate	= mmc_set_rate,
+	.get_rate	= mmc_get_rate,
+	.round_rate	= mmc_round_rate,
+	.enable		= mmc_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_MS_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
+};
+
+static unsigned long clcd_get_rate(struct clk *clk)
+{
+	u32 tmp, div, rate, oldclk;
+
+	/* The LCD clock must be on when accessing an LCD register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+		LPC32XX_CLKPWR_LCDCLK_CTRL);
+	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
+	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	rate = clk->parent->get_rate(clk->parent);
+
+	/* Only supports internal clocking */
+	if (tmp & TIM2_BCD)
+		return rate;
+
+	div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
+	tmp = rate / (2 + div);
+
+	return tmp;
+}
+
+static int clcd_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 tmp, prate, div, oldclk;
+
+	/* The LCD clock must be on when accessing an LCD register */
+	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+		LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD;
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate < prate) {
+		/* Find closest divider */
+		div = prate / rate;
+		if (div >= 2) {
+			div -= 2;
+			tmp &= ~TIM2_BCD;
+		}
+
+		tmp &= ~(0xF800001F);
+		tmp |= (div & 0x1F);
+		tmp |= (((div >> 5) & 0x1F) << 27);
+	}
+
+	__raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
+	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	return 0;
+}
+
+static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 prate, div;
+
+	prate = clk->parent->get_rate(clk->parent);
+
+	if (rate >= prate)
+		rate = prate;
+	else {
+		div = prate / rate;
+		if (div > 0x3ff)
+			div = 0x3ff;
+
+		rate = prate / div;
+	}
+
+	return rate;
+}
+
+static struct clk clk_lcd = {
+	.parent		= &clk_hclk,
+	.set_rate	= clcd_set_rate,
+	.get_rate	= clcd_get_rate,
+	.round_rate	= clcd_round_rate,
+	.enable		= local_onoff_enable,
+	.enable_reg	= LPC32XX_CLKPWR_LCDCLK_CTRL,
+	.enable_mask	= LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
+};
+
+static inline void clk_lock(void)
+{
+	mutex_lock(&clkm_lock);
+}
+
+static inline void clk_unlock(void)
+{
+	mutex_unlock(&clkm_lock);
+}
+
+static void local_clk_disable(struct clk *clk)
+{
+	WARN_ON(clk->usecount == 0);
+
+	/* Don't attempt to disable clock if it has no users */
+	if (clk->usecount > 0) {
+		clk->usecount--;
+
+		/* Only disable clock when it has no more users */
+		if ((clk->usecount == 0) && (clk->enable))
+			clk->enable(clk, 0);
+
+		/* Check parent clocks, they may need to be disabled too */
+		if (clk->parent)
+			local_clk_disable(clk->parent);
+	}
+}
+
+static int local_clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	/* Enable parent clocks first and update use counts */
+	if (clk->parent)
+		ret = local_clk_enable(clk->parent);
+
+	if (!ret) {
+		/* Only enable clock if it's currently disabled */
+		if ((clk->usecount == 0) && (clk->enable))
+			ret = clk->enable(clk, 1);
+
+		if (!ret)
+			clk->usecount++;
+		else if (clk->parent)
+			local_clk_disable(clk->parent);
+	}
+
+	return ret;
+}
+
+/*
+ * clk_enable - inform the system when the clock source should be running.
+ */
+int clk_enable(struct clk *clk)
+{
+	int ret;
+
+	clk_lock();
+	ret = local_clk_enable(clk);
+	clk_unlock();
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/*
+ * clk_disable - inform the system when the clock source is no longer required
+ */
+void clk_disable(struct clk *clk)
+{
+	clk_lock();
+	local_clk_disable(clk);
+	clk_unlock();
+}
+EXPORT_SYMBOL(clk_disable);
+
+/*
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long rate;
+
+	clk_lock();
+	rate = clk->get_rate(clk);
+	clk_unlock();
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * clk_set_rate - set the clock rate for a clock source
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	/*
+	 * Most system clocks can only be enabled or disabled, with
+	 * the actual rate set as part of the peripheral dividers
+	 * instead of high level clock control
+	 */
+	if (clk->set_rate) {
+		clk_lock();
+		ret = clk->set_rate(clk, rate);
+		clk_unlock();
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/*
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	clk_lock();
+
+	if (clk->round_rate)
+		rate = clk->round_rate(clk, rate);
+	else
+		rate = clk->get_rate(clk);
+
+	clk_unlock();
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/*
+ * clk_set_parent - set the parent clock source for this clock
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	/* Clock re-parenting is not supported */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/*
+ * clk_get_parent - get the parent clock source for this clock
+ */
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = (d), \
+		.con_id = (n), \
+		.clk = &(c), \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK(NULL, "osc_32KHz", osc_32KHz)
+	_REGISTER_CLOCK(NULL, "osc_pll397", osc_pll397)
+	_REGISTER_CLOCK(NULL, "osc_main", osc_main)
+	_REGISTER_CLOCK(NULL, "sys_ck", clk_sys)
+	_REGISTER_CLOCK(NULL, "arm_pll_ck", clk_armpll)
+	_REGISTER_CLOCK(NULL, "ck_pll5", clk_usbpll)
+	_REGISTER_CLOCK(NULL, "hclk_ck", clk_hclk)
+	_REGISTER_CLOCK(NULL, "pclk_ck", clk_pclk)
+	_REGISTER_CLOCK(NULL, "timer0_ck", clk_timer0)
+	_REGISTER_CLOCK(NULL, "timer1_ck", clk_timer1)
+	_REGISTER_CLOCK(NULL, "timer2_ck", clk_timer2)
+	_REGISTER_CLOCK(NULL, "timer3_ck", clk_timer3)
+	_REGISTER_CLOCK(NULL, "vfp9_ck", clk_vfp9)
+	_REGISTER_CLOCK(NULL, "clk_dmac", clk_dma)
+	_REGISTER_CLOCK("pnx4008-watchdog", NULL, clk_wdt)
+	_REGISTER_CLOCK(NULL, "uart3_ck", clk_uart3)
+	_REGISTER_CLOCK(NULL, "uart4_ck", clk_uart4)
+	_REGISTER_CLOCK(NULL, "uart5_ck", clk_uart5)
+	_REGISTER_CLOCK(NULL, "uart6_ck", clk_uart6)
+	_REGISTER_CLOCK("pnx-i2c.0", NULL, clk_i2c0)
+	_REGISTER_CLOCK("pnx-i2c.1", NULL, clk_i2c1)
+	_REGISTER_CLOCK("pnx-i2c.2", NULL, clk_i2c2)
+	_REGISTER_CLOCK("dev:ssp0", NULL, clk_ssp0)
+	_REGISTER_CLOCK("dev:ssp1", NULL, clk_ssp1)
+	_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
+	_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
+	_REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
+	_REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
+	_REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc)
+	_REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
+	_REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
+	_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
+	_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)
+	_REGISTER_CLOCK("lpc32xx_rtc", NULL, clk_rtc)
+};
+
+static int __init clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	/*
+	 * Setup muxed SYSCLK for HCLK PLL base -this selects the
+	 * parent clock used for the ARM PLL and is used to derive
+	 * the many system clock rates in the device.
+	 */
+	if (clk_is_sysclk_mainosc() != 0)
+		clk_sys.parent = &osc_main;
+	else
+		clk_sys.parent = &osc_pll397;
+
+	clk_sys.rate = clk_sys.parent->rate;
+
+	/* Compute the current ARM PLL and USB PLL frequencies */
+	local_update_armpll_rate();
+
+	/* Compute HCLK and PCLK bus rates */
+	clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
+	clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
+
+	/*
+	 * Enable system clocks - this step is somewhat formal, as the
+	 * clocks are already running, but it does get the clock data
+	 * inline with the actual system state. Never disable these
+	 * clocks as they will only stop if the system is going to sleep.
+	 * In that case, the chip/system power management functions will
+	 * handle clock gating.
+	 */
+	if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk))
+		printk(KERN_ERR "Error enabling system HCLK and PCLK\n");
+
+	/*
+	 * Timers 0 and 1 were enabled and are being used by the high
+	 * resolution tick function prior to this driver being initialized.
+	 * Tag them now as used.
+	 */
+	if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1))
+		printk(KERN_ERR "Error enabling timer tick clocks\n");
+
+	return 0;
+}
+core_initcall(clk_init);
+
diff --git a/arch/arm/mach-lpc32xx/clock.h b/arch/arm/mach-lpc32xx/clock.h
new file mode 100644
index 000000000000..c0a8434307f7
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/clock.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-lpc32xx/clock.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LPC32XX_CLOCK_H
+#define __LPC32XX_CLOCK_H
+
+struct clk {
+	struct list_head node;
+	struct clk *parent;
+	u32 rate;
+	u32 usecount;
+
+	int (*set_rate) (struct clk *, unsigned long);
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	unsigned long (*get_rate) (struct clk *clk);
+	int (*enable) (struct clk *, int);
+
+	/* Register address and bit mask for simple clocks */
+	void __iomem *enable_reg;
+	u32 enable_mask;
+};
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
new file mode 100644
index 000000000000..ee24dc28e93e
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -0,0 +1,271 @@
+/*
+ * arch/arm/mach-lpc32xx/common.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pnx.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/i2c.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Watchdog timer
+ */
+static struct resource watchdog_resources[] = {
+	[0] = {
+		.start = LPC32XX_WDTIM_BASE,
+		.end = LPC32XX_WDTIM_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device lpc32xx_watchdog_device = {
+	.name = "pnx4008-watchdog",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(watchdog_resources),
+	.resource = watchdog_resources,
+};
+
+/*
+ * I2C busses
+ */
+static struct i2c_pnx_data i2c0_data = {
+	.name = I2C_CHIP_NAME "1",
+	.base = LPC32XX_I2C1_BASE,
+	.irq = IRQ_LPC32XX_I2C_1,
+};
+
+static struct i2c_pnx_data i2c1_data = {
+	.name = I2C_CHIP_NAME "2",
+	.base = LPC32XX_I2C2_BASE,
+	.irq = IRQ_LPC32XX_I2C_2,
+};
+
+static struct i2c_pnx_data i2c2_data = {
+	.name = "USB-I2C",
+	.base = LPC32XX_OTG_I2C_BASE,
+	.irq = IRQ_LPC32XX_USB_I2C,
+};
+
+struct platform_device lpc32xx_i2c0_device = {
+	.name = "pnx-i2c",
+	.id = 0,
+	.dev = {
+		.platform_data = &i2c0_data,
+	},
+};
+
+struct platform_device lpc32xx_i2c1_device = {
+	.name = "pnx-i2c",
+	.id = 1,
+	.dev = {
+		.platform_data = &i2c1_data,
+	},
+};
+
+struct platform_device lpc32xx_i2c2_device = {
+	.name = "pnx-i2c",
+	.id = 2,
+	.dev = {
+		.platform_data = &i2c2_data,
+	},
+};
+
+/*
+ * Returns the unique ID for the device
+ */
+void lpc32xx_get_uid(u32 devid[4])
+{
+	int i;
+
+	for (i = 0; i < 4; i++)
+		devid[i] = __raw_readl(LPC32XX_CLKPWR_DEVID(i << 2));
+}
+
+/*
+ * Returns SYSCLK source
+ * 0 = PLL397, 1 = main oscillator
+ */
+int clk_is_sysclk_mainosc(void)
+{
+	if ((__raw_readl(LPC32XX_CLKPWR_SYSCLK_CTRL) &
+		LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX) == 0)
+		return 1;
+
+	return 0;
+}
+
+/*
+ * System reset via the watchdog timer
+ */
+void lpc32xx_watchdog_reset(void)
+{
+	/* Make sure WDT clocks are enabled */
+	__raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
+		LPC32XX_CLKPWR_TIMER_CLK_CTRL);
+
+	/* Instant assert of RESETOUT_N with pulse length 1mS */
+	__raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
+	__raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
+}
+
+/*
+ * Detects and returns IRAM size for the device variation
+ */
+#define LPC32XX_IRAM_BANK_SIZE SZ_128K
+static u32 iram_size;
+u32 lpc32xx_return_iram_size(void)
+{
+	if (iram_size == 0) {
+		u32 savedval1, savedval2;
+		void __iomem *iramptr1, *iramptr2;
+
+		iramptr1 = io_p2v(LPC32XX_IRAM_BASE);
+		iramptr2 = io_p2v(LPC32XX_IRAM_BASE + LPC32XX_IRAM_BANK_SIZE);
+		savedval1 = __raw_readl(iramptr1);
+		savedval2 = __raw_readl(iramptr2);
+
+		if (savedval1 == savedval2) {
+			__raw_writel(savedval2 + 1, iramptr2);
+			if (__raw_readl(iramptr1) == savedval2 + 1)
+				iram_size = LPC32XX_IRAM_BANK_SIZE;
+			else
+				iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
+			__raw_writel(savedval2, iramptr2);
+		} else
+			iram_size = LPC32XX_IRAM_BANK_SIZE * 2;
+	}
+
+	return iram_size;
+}
+
+/*
+ * Computes PLL rate from PLL register and input clock
+ */
+u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup)
+{
+	u32 ilfreq, p, m, n, fcco, fref, cfreq;
+	int mode;
+
+	/*
+	 * PLL requirements
+	 * ifreq must be >= 1MHz and <= 20MHz
+	 * FCCO must be >= 156MHz and <= 320MHz
+	 * FREF must be >= 1MHz and <= 27MHz
+	 * Assume the passed input data is not valid
+	 */
+
+	ilfreq = ifreq;
+	m = pllsetup->pll_m;
+	n = pllsetup->pll_n;
+	p = pllsetup->pll_p;
+
+	mode = (pllsetup->cco_bypass_b15 << 2) |
+		(pllsetup->direct_output_b14 << 1) |
+	pllsetup->fdbk_div_ctrl_b13;
+
+	switch (mode) {
+	case 0x0: /* Non-integer mode */
+		cfreq = (m * ilfreq) / (2 * p * n);
+		fcco = (m * ilfreq) / n;
+		fref = ilfreq / n;
+		break;
+
+	case 0x1: /* integer mode */
+		cfreq = (m * ilfreq) / n;
+		fcco = (m * ilfreq) / (n * 2 * p);
+		fref = ilfreq / n;
+		break;
+
+	case 0x2:
+	case 0x3: /* Direct mode */
+		cfreq = (m * ilfreq) / n;
+		fcco = cfreq;
+		fref = ilfreq / n;
+		break;
+
+	case 0x4:
+	case 0x5: /* Bypass mode */
+		cfreq = ilfreq / (2 * p);
+		fcco = 156000000;
+		fref = 1000000;
+		break;
+
+	case 0x6:
+	case 0x7: /* Direct bypass mode */
+	default:
+		cfreq = ilfreq;
+		fcco = 156000000;
+		fref = 1000000;
+		break;
+	}
+
+	if (fcco < 156000000 || fcco > 320000000)
+		cfreq = 0;
+
+	if (fref < 1000000 || fref > 27000000)
+		cfreq = 0;
+
+	return (u32) cfreq;
+}
+
+u32 clk_get_pclk_div(void)
+{
+	return 1 + ((__raw_readl(LPC32XX_CLKPWR_HCLK_DIV) >> 2) & 0x1F);
+}
+
+static struct map_desc lpc32xx_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_AHB0_START),
+		.pfn		= __phys_to_pfn(LPC32XX_AHB0_START),
+		.length		= LPC32XX_AHB0_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_AHB1_START),
+		.pfn		= __phys_to_pfn(LPC32XX_AHB1_START),
+		.length		= LPC32XX_AHB1_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_FABAPB_START),
+		.pfn		= __phys_to_pfn(LPC32XX_FABAPB_START),
+		.length		= LPC32XX_FABAPB_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= IO_ADDRESS(LPC32XX_IRAM_BASE),
+		.pfn		= __phys_to_pfn(LPC32XX_IRAM_BASE),
+		.length		= (LPC32XX_IRAM_BANK_SIZE * 2),
+		.type		= MT_DEVICE
+	},
+};
+
+void __init lpc32xx_map_io(void)
+{
+	iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
+}
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
new file mode 100644
index 000000000000..f82211fd80c1
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-lpc32xx/common.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2009-2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LPC32XX_COMMON_H
+#define __LPC32XX_COMMON_H
+
+#include <linux/platform_device.h>
+
+/*
+ * Arch specific platform device structures
+ */
+extern struct platform_device lpc32xx_watchdog_device;
+extern struct platform_device lpc32xx_i2c0_device;
+extern struct platform_device lpc32xx_i2c1_device;
+extern struct platform_device lpc32xx_i2c2_device;
+
+/*
+ * Other arch specific structures and functions
+ */
+extern struct sys_timer lpc32xx_timer;
+extern void __init lpc32xx_init_irq(void);
+extern void __init lpc32xx_map_io(void);
+extern void __init lpc32xx_serial_init(void);
+extern void __init lpc32xx_gpio_init(void);
+
+/*
+ * Structure used for setting up and querying the PLLS
+ */
+struct clk_pll_setup {
+	int analog_on;
+	int cco_bypass_b15;
+	int direct_output_b14;
+	int fdbk_div_ctrl_b13;
+	int pll_p;
+	int pll_n;
+	u32 pll_m;
+};
+
+extern int clk_is_sysclk_mainosc(void);
+extern u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup);
+extern u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval);
+extern u32 clk_get_pclk_div(void);
+
+/*
+ * Returns the LPC32xx unique 128-bit chip ID
+ */
+extern void lpc32xx_get_uid(u32 devid[4]);
+
+extern void lpc32xx_watchdog_reset(void);
+extern u32 lpc32xx_return_iram_size(void);
+
+/*
+ * Pointers used for sizing and copying suspend function data
+ */
+extern int lpc32xx_sys_suspend(void);
+extern int lpc32xx_sys_suspend_sz;
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/arch/arm/mach-lpc32xx/gpiolib.c
new file mode 100644
index 000000000000..69061ea8997a
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/gpiolib.c
@@ -0,0 +1,446 @@
+/*
+ * arch/arm/mach-lpc32xx/gpiolib.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+#define LPC32XX_GPIO_P3_INP_STATE		_GPREG(0x000)
+#define LPC32XX_GPIO_P3_OUTP_SET		_GPREG(0x004)
+#define LPC32XX_GPIO_P3_OUTP_CLR		_GPREG(0x008)
+#define LPC32XX_GPIO_P3_OUTP_STATE		_GPREG(0x00C)
+#define LPC32XX_GPIO_P2_DIR_SET			_GPREG(0x010)
+#define LPC32XX_GPIO_P2_DIR_CLR			_GPREG(0x014)
+#define LPC32XX_GPIO_P2_DIR_STATE		_GPREG(0x018)
+#define LPC32XX_GPIO_P2_INP_STATE		_GPREG(0x01C)
+#define LPC32XX_GPIO_P2_OUTP_SET		_GPREG(0x020)
+#define LPC32XX_GPIO_P2_OUTP_CLR		_GPREG(0x024)
+#define LPC32XX_GPIO_P2_MUX_SET			_GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR			_GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE		_GPREG(0x030)
+#define LPC32XX_GPIO_P0_INP_STATE		_GPREG(0x040)
+#define LPC32XX_GPIO_P0_OUTP_SET		_GPREG(0x044)
+#define LPC32XX_GPIO_P0_OUTP_CLR		_GPREG(0x048)
+#define LPC32XX_GPIO_P0_OUTP_STATE		_GPREG(0x04C)
+#define LPC32XX_GPIO_P0_DIR_SET			_GPREG(0x050)
+#define LPC32XX_GPIO_P0_DIR_CLR			_GPREG(0x054)
+#define LPC32XX_GPIO_P0_DIR_STATE		_GPREG(0x058)
+#define LPC32XX_GPIO_P1_INP_STATE		_GPREG(0x060)
+#define LPC32XX_GPIO_P1_OUTP_SET		_GPREG(0x064)
+#define LPC32XX_GPIO_P1_OUTP_CLR		_GPREG(0x068)
+#define LPC32XX_GPIO_P1_OUTP_STATE		_GPREG(0x06C)
+#define LPC32XX_GPIO_P1_DIR_SET			_GPREG(0x070)
+#define LPC32XX_GPIO_P1_DIR_CLR			_GPREG(0x074)
+#define LPC32XX_GPIO_P1_DIR_STATE		_GPREG(0x078)
+
+#define GPIO012_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO3_PIN_TO_BIT(x)			(1 << ((x) + 25))
+#define GPO3_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO012_PIN_IN_SEL(x, y)		(((x) >> (y)) & 1)
+#define GPIO3_PIN_IN_SHIFT(x)			((x) == 5 ? 24 : 10 + (x))
+#define GPIO3_PIN_IN_SEL(x, y)			((x) >> GPIO3_PIN_IN_SHIFT(y))
+#define GPIO3_PIN5_IN_SEL(x)			(((x) >> 24) & 1)
+#define GPI3_PIN_IN_SEL(x, y)			(((x) >> (y)) & 1)
+
+struct gpio_regs {
+	void __iomem *inp_state;
+	void __iomem *outp_set;
+	void __iomem *outp_clr;
+	void __iomem *dir_set;
+	void __iomem *dir_clr;
+};
+
+/*
+ * GPIO names
+ */
+static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = {
+	"p0.0", "p0.1", "p0.2", "p0.3",
+	"p0.4", "p0.5", "p0.6", "p0.7"
+};
+
+static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = {
+	"p1.0", "p1.1", "p1.2", "p1.3",
+	"p1.4", "p1.5", "p1.6", "p1.7",
+	"p1.8", "p1.9", "p1.10", "p1.11",
+	"p1.12", "p1.13", "p1.14", "p1.15",
+	"p1.16", "p1.17", "p1.18", "p1.19",
+	"p1.20", "p1.21", "p1.22", "p1.23",
+};
+
+static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = {
+	"p2.0", "p2.1", "p2.2", "p2.3",
+	"p2.4", "p2.5", "p2.6", "p2.7",
+	"p2.8", "p2.9", "p2.10", "p2.11",
+	"p2.12"
+};
+
+static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
+	"gpi000", "gpio01", "gpio02", "gpio03",
+	"gpio04", "gpio05"
+};
+
+static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = {
+	"gpi00", "gpi01", "gpi02", "gpi03",
+	"gpi04", "gpi05", "gpi06", "gpi07",
+	"gpi08", "gpi09",  NULL,    NULL,
+	 NULL,    NULL,    NULL,   "gpi15",
+	"gpi16", "gpi17", "gpi18", "gpi19",
+	"gpi20", "gpi21", "gpi22", "gpi23",
+	"gpi24", "gpi25", "gpi26", "gpi27"
+};
+
+static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = {
+	"gpo00", "gpo01", "gpo02", "gpo03",
+	"gpo04", "gpo05", "gpo06", "gpo07",
+	"gpo08", "gpo09", "gpo10", "gpo11",
+	"gpo12", "gpo13", "gpo14", "gpo15",
+	"gpo16", "gpo17", "gpo18", "gpo19",
+	"gpo20", "gpo21", "gpo22", "gpo23"
+};
+
+static struct gpio_regs gpio_grp_regs_p0 = {
+	.inp_state	= LPC32XX_GPIO_P0_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P0_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P0_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P0_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P0_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p1 = {
+	.inp_state	= LPC32XX_GPIO_P1_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P1_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P1_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P1_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P1_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p2 = {
+	.inp_state	= LPC32XX_GPIO_P2_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P2_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P2_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p3 = {
+	.inp_state	= LPC32XX_GPIO_P3_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P3_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P3_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+struct lpc32xx_gpio_chip {
+	struct gpio_chip	chip;
+	struct gpio_regs	*gpio_grp;
+};
+
+static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio(
+	struct gpio_chip *gpc)
+{
+	return container_of(gpc, struct lpc32xx_gpio_chip, chip);
+}
+
+static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	if (input)
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_clr);
+	else
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (input)
+		__raw_writel(u, group->gpio_grp->dir_clr);
+	else
+		__raw_writel(u, group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_set);
+	else
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_clr);
+}
+
+static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (high)
+		__raw_writel(u, group->gpio_grp->outp_set);
+	else
+		__raw_writel(u, group->gpio_grp->outp_clr);
+}
+
+static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
+	else
+		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
+}
+
+static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
+		pin);
+}
+
+static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	int state = __raw_readl(group->gpio_grp->inp_state);
+
+	/*
+	 * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
+	 * to bits 10..14, while GPIOP3-5 is mapped to bit 24.
+	 */
+	return GPIO3_PIN_IN_SEL(state, pin);
+}
+
+static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
+}
+
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p012(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p3(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip,
+	unsigned pin)
+{
+	return 0;
+}
+
+static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpio_state_p012(group, pin);
+}
+
+static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpio_state_p3(group, pin);
+}
+
+static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpi_state_p3(group, pin);
+}
+
+static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p012(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p3(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	return 0;
+}
+
+static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_level_p012(group, pin, value);
+}
+
+static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_level_p3(group, pin, value);
+}
+
+static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpo_level_p3(group, pin, value);
+}
+
+static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
+{
+	if (pin < chip->ngpio)
+		return 0;
+
+	return -EINVAL;
+}
+
+static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
+	{
+		.chip = {
+			.label			= "gpio_p0",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P0_GRP,
+			.ngpio			= LPC32XX_GPIO_P0_MAX,
+			.names			= gpio_p0_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p0,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p1",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P1_GRP,
+			.ngpio			= LPC32XX_GPIO_P1_MAX,
+			.names			= gpio_p1_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p1,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p2",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P2_GRP,
+			.ngpio			= LPC32XX_GPIO_P2_MAX,
+			.names			= gpio_p2_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p2,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p3",
+			.direction_input	= lpc32xx_gpio_dir_input_p3,
+			.get			= lpc32xx_gpio_get_value_p3,
+			.direction_output	= lpc32xx_gpio_dir_output_p3,
+			.set			= lpc32xx_gpio_set_value_p3,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P3_GRP,
+			.ngpio			= LPC32XX_GPIO_P3_MAX,
+			.names			= gpio_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpi_p3",
+			.direction_input	= lpc32xx_gpio_dir_in_always,
+			.get			= lpc32xx_gpi_get_value,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPI_P3_GRP,
+			.ngpio			= LPC32XX_GPI_P3_MAX,
+			.names			= gpi_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpo_p3",
+			.direction_output	= lpc32xx_gpio_dir_out_always,
+			.set			= lpc32xx_gpo_set_value,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPO_P3_GRP,
+			.ngpio			= LPC32XX_GPO_P3_MAX,
+			.names			= gpo_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+};
+
+void __init lpc32xx_gpio_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
+		gpiochip_add(&lpc32xx_gpiochip[i].chip);
+}
diff --git a/arch/arm/mach-lpc32xx/include/mach/clkdev.h b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
new file mode 100644
index 000000000000..9bf0637e29ce
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/clkdev.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/clkdev.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_CLKDEV_H
+#define __ASM_ARCH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..629e744aeb9e
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Debug output is hardcoded to standard UART 5
+*/
+
+	.macro	addruart, rp, rv
+	ldreq	\rp, =0x40090000
+	ldrne	\rv, =0xF4090000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..870227c96602
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/entry-macro.S
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#define LPC32XX_INTC_MASKED_STATUS_OFS	0x8
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IO_ADDRESS(LPC32XX_MIC_BASE)
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+/*
+ * Return IRQ number in irqnr. Also return processor Z flag status in CPSR
+ * as set if an interrupt is pending.
+ */
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqstat, [\base, #LPC32XX_INTC_MASKED_STATUS_OFS]
+	clz	\irqnr, \irqstat
+	rsb	\irqnr, \irqnr, #31
+	teq	\irqstat, #0
+	.endm
+
+	.macro	irq_prio_table
+	.endm
+
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
new file mode 100644
index 000000000000..67d03da1eee9
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/gpio.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define LPC32XX_GPIO_P0_MAX 8
+#define LPC32XX_GPIO_P1_MAX 24
+#define LPC32XX_GPIO_P2_MAX 13
+#define LPC32XX_GPIO_P3_MAX 6
+#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPO_P3_MAX 24
+
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/hardware.h b/arch/arm/mach-lpc32xx/include/mach/hardware.h
new file mode 100644
index 000000000000..33e1dde37bd9
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/hardware.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Start of virtual addresses for IO devices
+ */
+#define IO_BASE		0xF0000000
+
+/*
+ * This macro relies on fact that for all HW i/o addresses bits 20-23 are 0
+ */
+#define IO_ADDRESS(x)	(((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) |\
+			 IO_BASE)
+
+#define io_p2v(x)	((void __iomem *) (unsigned long) IO_ADDRESS(x))
+#define io_v2p(x)	((((x) & 0x0ff00000) << 4) | ((x) & 0x000fffff))
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/i2c.h b/arch/arm/mach-lpc32xx/include/mach/i2c.h
new file mode 100644
index 000000000000..034dc9286bcc
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/i2c.h
@@ -0,0 +1,63 @@
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H
+#define __ASM_ARCH_I2C_H
+
+enum {
+	mstatus_tdi = 0x00000001,
+	mstatus_afi = 0x00000002,
+	mstatus_nai = 0x00000004,
+	mstatus_drmi = 0x00000008,
+	mstatus_active = 0x00000020,
+	mstatus_scl = 0x00000040,
+	mstatus_sda = 0x00000080,
+	mstatus_rff = 0x00000100,
+	mstatus_rfe = 0x00000200,
+	mstatus_tff = 0x00000400,
+	mstatus_tfe = 0x00000800,
+};
+
+enum {
+	mcntrl_tdie = 0x00000001,
+	mcntrl_afie = 0x00000002,
+	mcntrl_naie = 0x00000004,
+	mcntrl_drmie = 0x00000008,
+	mcntrl_daie = 0x00000020,
+	mcntrl_rffie = 0x00000040,
+	mcntrl_tffie = 0x00000080,
+	mcntrl_reset = 0x00000100,
+	mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+	rw_bit = 1 << 0,
+	start_bit = 1 << 8,
+	stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
+#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
+#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
+#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
+#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
+#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
+
+#define I2C_CHIP_NAME		"PNX4008-I2C"
+
+#endif				/* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/io.h b/arch/arm/mach-lpc32xx/include/mach/io.h
new file mode 100644
index 000000000000..9b59ab5cef89
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/io.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/irqs.h b/arch/arm/mach-lpc32xx/include/mach/irqs.h
new file mode 100644
index 000000000000..2667f52e3b04
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/irqs.h
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/irqs.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_IRQS_H
+#define __ASM_ARM_ARCH_IRQS_H
+
+#define LPC32XX_SIC1_IRQ(n)		(32 + (n))
+#define LPC32XX_SIC2_IRQ(n)		(64 + (n))
+
+/*
+ * MIC interrupts
+ */
+#define IRQ_LPC32XX_SUB1IRQ		0
+#define IRQ_LPC32XX_SUB2IRQ		1
+#define IRQ_LPC32XX_PWM3		3
+#define IRQ_LPC32XX_PWM4		4
+#define IRQ_LPC32XX_HSTIMER		5
+#define IRQ_LPC32XX_WATCH		6
+#define IRQ_LPC32XX_UART_IIR3		7
+#define IRQ_LPC32XX_UART_IIR4		8
+#define IRQ_LPC32XX_UART_IIR5		9
+#define IRQ_LPC32XX_UART_IIR6		10
+#define IRQ_LPC32XX_FLASH		11
+#define IRQ_LPC32XX_SD1			13
+#define IRQ_LPC32XX_LCD			14
+#define IRQ_LPC32XX_SD0			15
+#define IRQ_LPC32XX_TIMER0		16
+#define IRQ_LPC32XX_TIMER1		17
+#define IRQ_LPC32XX_TIMER2		18
+#define IRQ_LPC32XX_TIMER3		19
+#define IRQ_LPC32XX_SSP0		20
+#define IRQ_LPC32XX_SSP1		21
+#define IRQ_LPC32XX_I2S0		22
+#define IRQ_LPC32XX_I2S1		23
+#define IRQ_LPC32XX_UART_IIR7		24
+#define IRQ_LPC32XX_UART_IIR2		25
+#define IRQ_LPC32XX_UART_IIR1		26
+#define IRQ_LPC32XX_MSTIMER		27
+#define IRQ_LPC32XX_DMA			28
+#define IRQ_LPC32XX_ETHERNET		29
+#define IRQ_LPC32XX_SUB1FIQ		30
+#define IRQ_LPC32XX_SUB2FIQ		31
+
+/*
+ * SIC1 interrupts start at offset 32
+ */
+#define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
+#define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
+#define IRQ_LPC32XX_GPI_11		LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
+#define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
+#define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)
+#define IRQ_LPC32XX_SPI2		LPC32XX_SIC1_IRQ(12)
+#define IRQ_LPC32XX_PLLUSB		LPC32XX_SIC1_IRQ(13)
+#define IRQ_LPC32XX_PLLHCLK		LPC32XX_SIC1_IRQ(14)
+#define IRQ_LPC32XX_PLL397		LPC32XX_SIC1_IRQ(17)
+#define IRQ_LPC32XX_I2C_2		LPC32XX_SIC1_IRQ(18)
+#define IRQ_LPC32XX_I2C_1		LPC32XX_SIC1_IRQ(19)
+#define IRQ_LPC32XX_RTC			LPC32XX_SIC1_IRQ(20)
+#define IRQ_LPC32XX_KEY			LPC32XX_SIC1_IRQ(22)
+#define IRQ_LPC32XX_SPI1		LPC32XX_SIC1_IRQ(23)
+#define IRQ_LPC32XX_SW			LPC32XX_SIC1_IRQ(24)
+#define IRQ_LPC32XX_USB_OTG_TIMER	LPC32XX_SIC1_IRQ(25)
+#define IRQ_LPC32XX_USB_OTG_ATX		LPC32XX_SIC1_IRQ(26)
+#define IRQ_LPC32XX_USB_HOST		LPC32XX_SIC1_IRQ(27)
+#define IRQ_LPC32XX_USB_DEV_DMA		LPC32XX_SIC1_IRQ(28)
+#define IRQ_LPC32XX_USB_DEV_LP		LPC32XX_SIC1_IRQ(29)
+#define IRQ_LPC32XX_USB_DEV_HP		LPC32XX_SIC1_IRQ(30)
+#define IRQ_LPC32XX_USB_I2C		LPC32XX_SIC1_IRQ(31)
+
+/*
+ * SIC2 interrupts start at offset 64
+ */
+#define IRQ_LPC32XX_GPIO_00		LPC32XX_SIC2_IRQ(0)
+#define IRQ_LPC32XX_GPIO_01		LPC32XX_SIC2_IRQ(1)
+#define IRQ_LPC32XX_GPIO_02		LPC32XX_SIC2_IRQ(2)
+#define IRQ_LPC32XX_GPIO_03		LPC32XX_SIC2_IRQ(3)
+#define IRQ_LPC32XX_GPIO_04		LPC32XX_SIC2_IRQ(4)
+#define IRQ_LPC32XX_GPIO_05		LPC32XX_SIC2_IRQ(5)
+#define IRQ_LPC32XX_SPI2_DATAIN		LPC32XX_SIC2_IRQ(6)
+#define IRQ_LPC32XX_U2_HCTS		LPC32XX_SIC2_IRQ(7)
+#define IRQ_LPC32XX_P0_P1_IRQ		LPC32XX_SIC2_IRQ(8)
+#define IRQ_LPC32XX_GPI_08		LPC32XX_SIC2_IRQ(9)
+#define IRQ_LPC32XX_GPI_09		LPC32XX_SIC2_IRQ(10)
+#define IRQ_LPC32XX_GPI_19		LPC32XX_SIC2_IRQ(11)
+#define IRQ_LPC32XX_U7_HCTS		LPC32XX_SIC2_IRQ(12)
+#define IRQ_LPC32XX_GPI_07		LPC32XX_SIC2_IRQ(15)
+#define IRQ_LPC32XX_SDIO		LPC32XX_SIC2_IRQ(18)
+#define IRQ_LPC32XX_U5_RX		LPC32XX_SIC2_IRQ(19)
+#define IRQ_LPC32XX_SPI1_DATAIN		LPC32XX_SIC2_IRQ(20)
+#define IRQ_LPC32XX_GPI_00		LPC32XX_SIC2_IRQ(22)
+#define IRQ_LPC32XX_GPI_01		LPC32XX_SIC2_IRQ(23)
+#define IRQ_LPC32XX_GPI_02		LPC32XX_SIC2_IRQ(24)
+#define IRQ_LPC32XX_GPI_03		LPC32XX_SIC2_IRQ(25)
+#define IRQ_LPC32XX_GPI_04		LPC32XX_SIC2_IRQ(26)
+#define IRQ_LPC32XX_GPI_05		LPC32XX_SIC2_IRQ(27)
+#define IRQ_LPC32XX_GPI_06		LPC32XX_SIC2_IRQ(28)
+#define IRQ_LPC32XX_SYSCLK		LPC32XX_SIC2_IRQ(31)
+
+#define NR_IRQS				96
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h
new file mode 100644
index 000000000000..044e1acecbe6
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/memory.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/memory.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset of bank 0
+ */
+#define PHYS_OFFSET	UL(0x80000000)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/platform.h b/arch/arm/mach-lpc32xx/include/mach/platform.h
new file mode 100644
index 000000000000..14ea8d1aadb5
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/platform.h
@@ -0,0 +1,694 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/platform.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+#define _SBF(f, v)				((v) << (f))
+#define _BIT(n)					_SBF(n, 1)
+
+/*
+ * AHB 0 physical base addresses
+ */
+#define LPC32XX_SLC_BASE			0x20020000
+#define LPC32XX_SSP0_BASE			0x20084000
+#define LPC32XX_SPI1_BASE			0x20088000
+#define LPC32XX_SSP1_BASE			0x2008C000
+#define LPC32XX_SPI2_BASE			0x20090000
+#define LPC32XX_I2S0_BASE			0x20094000
+#define LPC32XX_SD_BASE				0x20098000
+#define LPC32XX_I2S1_BASE			0x2009C000
+#define LPC32XX_MLC_BASE			0x200A8000
+#define LPC32XX_AHB0_START			LPC32XX_SLC_BASE
+#define LPC32XX_AHB0_SIZE			0x00089000
+
+/*
+ * AHB 1 physical base addresses
+ */
+#define LPC32XX_DMA_BASE			0x31000000
+#define LPC32XX_USB_BASE			0x31020000
+#define LPC32XX_USBH_BASE			0x31020000
+#define LPC32XX_USB_OTG_BASE			0x31020000
+#define LPC32XX_OTG_I2C_BASE			0x31020300
+#define LPC32XX_LCD_BASE			0x31040000
+#define LPC32XX_ETHERNET_BASE			0x31060000
+#define LPC32XX_EMC_BASE			0x31080000
+#define LPC32XX_ETB_CFG_BASE			0x310C0000
+#define LPC32XX_ETB_DATA_BASE			0x310E0000
+#define LPC32XX_AHB1_START			LPC32XX_DMA_BASE
+#define LPC32XX_AHB1_SIZE			0x000E1000
+
+/*
+ * FAB physical base addresses
+ */
+#define LPC32XX_CLK_PM_BASE			0x40004000
+#define LPC32XX_MIC_BASE			0x40008000
+#define LPC32XX_SIC1_BASE			0x4000C000
+#define LPC32XX_SIC2_BASE			0x40010000
+#define LPC32XX_HS_UART1_BASE			0x40014000
+#define LPC32XX_HS_UART2_BASE			0x40018000
+#define LPC32XX_HS_UART7_BASE			0x4001C000
+#define LPC32XX_RTC_BASE			0x40024000
+#define LPC32XX_RTC_RAM_BASE			0x40024080
+#define LPC32XX_GPIO_BASE			0x40028000
+#define LPC32XX_PWM3_BASE			0x4002C000
+#define LPC32XX_PWM4_BASE			0x40030000
+#define LPC32XX_MSTIM_BASE			0x40034000
+#define LPC32XX_HSTIM_BASE			0x40038000
+#define LPC32XX_WDTIM_BASE			0x4003C000
+#define LPC32XX_DEBUG_CTRL_BASE			0x40040000
+#define LPC32XX_TIMER0_BASE			0x40044000
+#define LPC32XX_ADC_BASE			0x40048000
+#define LPC32XX_TIMER1_BASE			0x4004C000
+#define LPC32XX_KSCAN_BASE			0x40050000
+#define LPC32XX_UART_CTRL_BASE			0x40054000
+#define LPC32XX_TIMER2_BASE			0x40058000
+#define LPC32XX_PWM1_BASE			0x4005C000
+#define LPC32XX_PWM2_BASE			0x4005C004
+#define LPC32XX_TIMER3_BASE			0x40060000
+
+/*
+ * APB physical base addresses
+ */
+#define LPC32XX_UART3_BASE			0x40080000
+#define LPC32XX_UART4_BASE			0x40088000
+#define LPC32XX_UART5_BASE			0x40090000
+#define LPC32XX_UART6_BASE			0x40098000
+#define LPC32XX_I2C1_BASE			0x400A0000
+#define LPC32XX_I2C2_BASE			0x400A8000
+
+/*
+ * FAB and APB base and sizing
+ */
+#define LPC32XX_FABAPB_START			LPC32XX_CLK_PM_BASE
+#define LPC32XX_FABAPB_SIZE			0x000A5000
+
+/*
+ * Internal memory bases and sizes
+ */
+#define LPC32XX_IRAM_BASE			0x08000000
+#define LPC32XX_IROM_BASE			0x0C000000
+
+/*
+ * External Static Memory Bank Address Space Bases
+ */
+#define LPC32XX_EMC_CS0_BASE			0xE0000000
+#define LPC32XX_EMC_CS1_BASE			0xE1000000
+#define LPC32XX_EMC_CS2_BASE			0xE2000000
+#define LPC32XX_EMC_CS3_BASE			0xE3000000
+
+/*
+ * External SDRAM Memory Bank Address Space Bases
+ */
+#define LPC32XX_EMC_DYCS0_BASE			0x80000000
+#define LPC32XX_EMC_DYCS1_BASE			0xA0000000
+
+/*
+ * Clock and crystal information
+ */
+#define LPC32XX_MAIN_OSC_FREQ			13000000
+#define LPC32XX_CLOCK_OSC_FREQ			32768
+
+/*
+ * Clock and Power control register offsets
+ */
+#define _PMREG(x)				io_p2v(LPC32XX_CLK_PM_BASE +\
+						(x))
+#define LPC32XX_CLKPWR_DEBUG_CTRL		_PMREG(0x000)
+#define LPC32XX_CLKPWR_BOOTMAP			_PMREG(0x014)
+#define LPC32XX_CLKPWR_P01_ER			_PMREG(0x018)
+#define LPC32XX_CLKPWR_USBCLK_PDIV		_PMREG(0x01C)
+#define LPC32XX_CLKPWR_INT_ER			_PMREG(0x020)
+#define LPC32XX_CLKPWR_INT_RS			_PMREG(0x024)
+#define LPC32XX_CLKPWR_INT_SR			_PMREG(0x028)
+#define LPC32XX_CLKPWR_INT_AP			_PMREG(0x02C)
+#define LPC32XX_CLKPWR_PIN_ER			_PMREG(0x030)
+#define LPC32XX_CLKPWR_PIN_RS			_PMREG(0x034)
+#define LPC32XX_CLKPWR_PIN_SR			_PMREG(0x038)
+#define LPC32XX_CLKPWR_PIN_AP			_PMREG(0x03C)
+#define LPC32XX_CLKPWR_HCLK_DIV			_PMREG(0x040)
+#define LPC32XX_CLKPWR_PWR_CTRL			_PMREG(0x044)
+#define LPC32XX_CLKPWR_PLL397_CTRL		_PMREG(0x048)
+#define LPC32XX_CLKPWR_MAIN_OSC_CTRL		_PMREG(0x04C)
+#define LPC32XX_CLKPWR_SYSCLK_CTRL		_PMREG(0x050)
+#define LPC32XX_CLKPWR_LCDCLK_CTRL		_PMREG(0x054)
+#define LPC32XX_CLKPWR_HCLKPLL_CTRL		_PMREG(0x058)
+#define LPC32XX_CLKPWR_ADC_CLK_CTRL_1		_PMREG(0x060)
+#define LPC32XX_CLKPWR_USB_CTRL			_PMREG(0x064)
+#define LPC32XX_CLKPWR_SDRAMCLK_CTRL		_PMREG(0x068)
+#define LPC32XX_CLKPWR_DDR_LAP_NOM		_PMREG(0x06C)
+#define LPC32XX_CLKPWR_DDR_LAP_COUNT		_PMREG(0x070)
+#define LPC32XX_CLKPWR_DDR_LAP_DELAY		_PMREG(0x074)
+#define LPC32XX_CLKPWR_SSP_CLK_CTRL		_PMREG(0x078)
+#define LPC32XX_CLKPWR_I2S_CLK_CTRL		_PMREG(0x07C)
+#define LPC32XX_CLKPWR_MS_CTRL			_PMREG(0x080)
+#define LPC32XX_CLKPWR_MACCLK_CTRL		_PMREG(0x090)
+#define LPC32XX_CLKPWR_TEST_CLK_SEL		_PMREG(0x0A4)
+#define LPC32XX_CLKPWR_SFW_INT			_PMREG(0x0A8)
+#define LPC32XX_CLKPWR_I2C_CLK_CTRL		_PMREG(0x0AC)
+#define LPC32XX_CLKPWR_KEY_CLK_CTRL		_PMREG(0x0B0)
+#define LPC32XX_CLKPWR_ADC_CLK_CTRL		_PMREG(0x0B4)
+#define LPC32XX_CLKPWR_PWM_CLK_CTRL		_PMREG(0x0B8)
+#define LPC32XX_CLKPWR_TIMER_CLK_CTRL		_PMREG(0x0BC)
+#define LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1	_PMREG(0x0C0)
+#define LPC32XX_CLKPWR_SPI_CLK_CTRL		_PMREG(0x0C4)
+#define LPC32XX_CLKPWR_NAND_CLK_CTRL		_PMREG(0x0C8)
+#define LPC32XX_CLKPWR_UART3_CLK_CTRL		_PMREG(0x0D0)
+#define LPC32XX_CLKPWR_UART4_CLK_CTRL		_PMREG(0x0D4)
+#define LPC32XX_CLKPWR_UART5_CLK_CTRL		_PMREG(0x0D8)
+#define LPC32XX_CLKPWR_UART6_CLK_CTRL		_PMREG(0x0DC)
+#define LPC32XX_CLKPWR_IRDA_CLK_CTRL		_PMREG(0x0E0)
+#define LPC32XX_CLKPWR_UART_CLK_CTRL		_PMREG(0x0E4)
+#define LPC32XX_CLKPWR_DMA_CLK_CTRL		_PMREG(0x0E8)
+#define LPC32XX_CLKPWR_AUTOCLOCK		_PMREG(0x0EC)
+#define LPC32XX_CLKPWR_DEVID(x)			_PMREG(0x130 + (x))
+
+/*
+ * clkpwr_debug_ctrl register definitions
+*/
+#define LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT	_BIT(4)
+
+/*
+ * clkpwr_bootmap register definitions
+ */
+#define LPC32XX_CLKPWR_BOOTMAP_SEL_BIT		_BIT(1)
+
+/*
+ * clkpwr_start_gpio register bit definitions
+ */
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO23_BIT	_BIT(31)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO22_BIT	_BIT(30)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO21_BIT	_BIT(29)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO20_BIT	_BIT(28)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO19_BIT	_BIT(27)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO18_BIT	_BIT(26)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO17_BIT	_BIT(25)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO16_BIT	_BIT(24)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO15_BIT	_BIT(23)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO14_BIT	_BIT(22)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO13_BIT	_BIT(21)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO12_BIT	_BIT(20)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO11_BIT	_BIT(19)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO10_BIT	_BIT(18)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO9_BIT	_BIT(17)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO8_BIT	_BIT(16)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO7_BIT	_BIT(15)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO6_BIT	_BIT(14)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO5_BIT	_BIT(13)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO4_BIT	_BIT(12)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO3_BIT	_BIT(11)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO2_BIT	_BIT(10)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO1_BIT	_BIT(9)
+#define LPC32XX_CLKPWR_GPIOSRC_P1IO0_BIT	_BIT(8)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO7_BIT	_BIT(7)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO6_BIT	_BIT(6)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO5_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO4_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO3_BIT	_BIT(3)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO2_BIT	_BIT(2)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO1_BIT	_BIT(1)
+#define LPC32XX_CLKPWR_GPIOSRC_P0IO0_BIT	_BIT(0)
+
+/*
+ * clkpwr_usbclk_pdiv register definitions
+ */
+#define LPC32XX_CLKPWR_USBPDIV_PLL_MASK		0xF
+
+/*
+ * clkpwr_start_int, clkpwr_start_raw_sts_int, clkpwr_start_sts_int,
+ * clkpwr_start_pol_int, register bit definitions
+ */
+#define LPC32XX_CLKPWR_INTSRC_ADC_BIT		_BIT(31)
+#define LPC32XX_CLKPWR_INTSRC_TS_P_BIT		_BIT(30)
+#define LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT	_BIT(29)
+#define LPC32XX_CLKPWR_INTSRC_USBAHNEEDCLK_BIT	_BIT(26)
+#define LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT	_BIT(25)
+#define LPC32XX_CLKPWR_INTSRC_RTC_BIT		_BIT(24)
+#define LPC32XX_CLKPWR_INTSRC_USBNEEDCLK_BIT	_BIT(23)
+#define LPC32XX_CLKPWR_INTSRC_USB_BIT		_BIT(22)
+#define LPC32XX_CLKPWR_INTSRC_I2C_BIT		_BIT(21)
+#define LPC32XX_CLKPWR_INTSRC_USBOTGTIMER_BIT	_BIT(20)
+#define LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT	_BIT(19)
+#define LPC32XX_CLKPWR_INTSRC_KEY_BIT		_BIT(16)
+#define LPC32XX_CLKPWR_INTSRC_MAC_BIT		_BIT(7)
+#define LPC32XX_CLKPWR_INTSRC_P0P1_BIT		_BIT(6)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT	_BIT(3)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT	_BIT(2)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT	_BIT(1)
+#define LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT	_BIT(0)
+
+/*
+ * clkpwr_start_pin, clkpwr_start_raw_sts_pin, clkpwr_start_sts_pin,
+ * clkpwr_start_pol_pin register bit definitions
+ */
+#define LPC32XX_CLKPWR_EXTSRC_U7_RX_BIT		_BIT(31)
+#define LPC32XX_CLKPWR_EXTSRC_U7_HCTS_BIT	_BIT(30)
+#define LPC32XX_CLKPWR_EXTSRC_U6_IRRX_BIT	_BIT(28)
+#define LPC32XX_CLKPWR_EXTSRC_U5_RX_BIT		_BIT(26)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT	_BIT(25)
+#define LPC32XX_CLKPWR_EXTSRC_U3_RX_BIT		_BIT(24)
+#define LPC32XX_CLKPWR_EXTSRC_U2_HCTS_BIT	_BIT(23)
+#define LPC32XX_CLKPWR_EXTSRC_U2_RX_BIT		_BIT(22)
+#define LPC32XX_CLKPWR_EXTSRC_U1_RX_BIT		_BIT(21)
+#define LPC32XX_CLKPWR_EXTSRC_MSDIO_INT_BIT	_BIT(18)
+#define LPC32XX_CLKPWR_EXTSRC_MSDIO_SRT_BIT	_BIT(17)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT	_BIT(16)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT	_BIT(15)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT	_BIT(14)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT	_BIT(13)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT	_BIT(12)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT	_BIT(11)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT	_BIT(10)
+#define LPC32XX_CLKPWR_EXTSRC_SYSCLKEN_BIT	_BIT(9)
+#define LPC32XX_CLKPWR_EXTSRC_SPI1_DATIN_BIT	_BIT(8)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT	_BIT(7)
+#define LPC32XX_CLKPWR_EXTSRC_SPI2_DATIN_BIT	_BIT(6)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT	_BIT(3)
+
+/*
+ * clkpwr_hclk_div register definitions
+ */
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_STOP	(0x0 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_NORM	(0x1 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_DDRCLK_HALF	(0x2 << 7)
+#define LPC32XX_CLKPWR_HCLKDIV_PCLK_DIV(n)	(((n) & 0x1F) << 2)
+#define LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(n)	((n) & 0x3)
+
+/*
+ * clkpwr_pwr_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_CTRL_FORCE_PCLK		_BIT(10)
+#define LPC32XX_CLKPWR_SDRAM_SELF_RFSH		_BIT(9)
+#define LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH	_BIT(8)
+#define LPC32XX_CLKPWR_AUTO_SDRAM_SELF_RFSH	_BIT(7)
+#define LPC32XX_CLKPWR_HIGHCORE_STATE_BIT	_BIT(5)
+#define LPC32XX_CLKPWR_SYSCLKEN_STATE_BIT	_BIT(4)
+#define LPC32XX_CLKPWR_SYSCLKEN_GPIO_EN		_BIT(3)
+#define LPC32XX_CLKPWR_SELECT_RUN_MODE		_BIT(2)
+#define LPC32XX_CLKPWR_HIGHCORE_GPIO_EN		_BIT(1)
+#define LPC32XX_CLKPWR_STOP_MODE_CTRL		_BIT(0)
+
+/*
+ * clkpwr_pll397_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PLL397_MSLOCK_STS	_BIT(10)
+#define LPC32XX_CLKPWR_PLL397_BYPASS		_BIT(9)
+#define LPC32XX_CLKPWR_PLL397_BIAS_NORM		0x000
+#define LPC32XX_CLKPWR_PLL397_BIAS_N12_5	0x040
+#define LPC32XX_CLKPWR_PLL397_BIAS_N25		0x080
+#define LPC32XX_CLKPWR_PLL397_BIAS_N37_5	0x0C0
+#define LPC32XX_CLKPWR_PLL397_BIAS_P12_5	0x100
+#define LPC32XX_CLKPWR_PLL397_BIAS_P25		0x140
+#define LPC32XX_CLKPWR_PLL397_BIAS_P37_5	0x180
+#define LPC32XX_CLKPWR_PLL397_BIAS_P50		0x1C0
+#define LPC32XX_CLKPWR_PLL397_BIAS_MASK		0x1C0
+#define LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS	_BIT(1)
+#define LPC32XX_CLKPWR_SYSCTRL_PLL397_STS	_BIT(0)
+
+/*
+ * clkpwr_main_osc_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MOSC_ADD_CAP(n)		(((n) & 0x7F) << 2)
+#define LPC32XX_CLKPWR_MOSC_CAP_MASK		(0x7F << 2)
+#define LPC32XX_CLKPWR_TEST_MODE		_BIT(1)
+#define LPC32XX_CLKPWR_MOSC_DISABLE		_BIT(0)
+
+/*
+ * clkpwr_sysclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SYSCTRL_BP_TRIG(n)	(((n) & 0x3FF) << 2)
+#define LPC32XX_CLKPWR_SYSCTRL_BP_MASK		(0x3FF << 2)
+#define LPC32XX_CLKPWR_SYSCTRL_USEPLL397	_BIT(1)
+#define LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX	_BIT(0)
+
+/*
+ * clkpwr_lcdclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT12	0x000
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16	0x040
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT15	0x080
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT24	0x0C0
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN4M	0x100
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_STN8C	0x140
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN4M	0x180
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_DSTN8C	0x1C0
+#define LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK	0x01C0
+#define LPC32XX_CLKPWR_LCDCTRL_CLK_EN		0x020
+#define LPC32XX_CLKPWR_LCDCTRL_SET_PSCALE(n)	((n - 1) & 0x1F)
+#define LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK	0x001F
+
+/*
+ * clkpwr_hclkpll_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_HCLKPLL_POWER_UP		_BIT(16)
+#define LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS	_BIT(15)
+#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS	_BIT(14)
+#define LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK	_BIT(13)
+#define LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(n)	(((n) & 0x3) << 11)
+#define LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(n)	(((n) & 0x3) << 9)
+#define LPC32XX_CLKPWR_HCLKPLL_PLLM(n)		(((n) & 0xFF) << 1)
+#define LPC32XX_CLKPWR_HCLKPLL_PLL_STS		_BIT(0)
+
+/*
+ * clkpwr_adc_clk_ctrl_1 register definitions
+ */
+#define LPC32XX_CLKPWR_ADCCTRL1_RTDIV(n)	(((n) & 0xFF) << 0)
+#define LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL	_BIT(8)
+
+/*
+ * clkpwr_usb_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_USBCTRL_HCLK_EN		_BIT(24)
+#define LPC32XX_CLKPWR_USBCTRL_USBI2C_EN	_BIT(23)
+#define LPC32XX_CLKPWR_USBCTRL_USBDVND_EN	_BIT(22)
+#define LPC32XX_CLKPWR_USBCTRL_USBHSTND_EN	_BIT(21)
+#define LPC32XX_CLKPWR_USBCTRL_PU_ADD		(0x0 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_BUS_KEEPER	(0x1 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_PD_ADD		(0x3 << 19)
+#define LPC32XX_CLKPWR_USBCTRL_CLK_EN2		_BIT(18)
+#define LPC32XX_CLKPWR_USBCTRL_CLK_EN1		_BIT(17)
+#define LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP	_BIT(16)
+#define LPC32XX_CLKPWR_USBCTRL_CCO_BYPASS	_BIT(15)
+#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_BYPASS	_BIT(14)
+#define LPC32XX_CLKPWR_USBCTRL_FDBK_SEL_FCLK	_BIT(13)
+#define LPC32XX_CLKPWR_USBCTRL_POSTDIV_2POW(n)	(((n) & 0x3) << 11)
+#define LPC32XX_CLKPWR_USBCTRL_PREDIV_PLUS1(n)	(((n) & 0x3) << 9)
+#define LPC32XX_CLKPWR_USBCTRL_FDBK_PLUS1(n)	(((n) & 0xFF) << 1)
+#define LPC32XX_CLKPWR_USBCTRL_PLL_STS		_BIT(0)
+
+/*
+ * clkpwr_sdramclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_CLK	_BIT(22)
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW		_BIT(21)
+#define LPC32XX_CLKPWR_SDRCLK_FASTSLEW_DAT	_BIT(20)
+#define LPC32XX_CLKPWR_SDRCLK_SW_DDR_RESET	_BIT(19)
+#define LPC32XX_CLKPWR_SDRCLK_HCLK_DLY(n)	(((n) & 0x1F) << 14)
+#define LPC32XX_CLKPWR_SDRCLK_DLY_ADDR_STS	_BIT(13)
+#define LPC32XX_CLKPWR_SDRCLK_SENS_FACT(n)	(((n) & 0x7) << 10)
+#define LPC32XX_CLKPWR_SDRCLK_USE_CAL		_BIT(9)
+#define LPC32XX_CLKPWR_SDRCLK_DO_CAL		_BIT(8)
+#define LPC32XX_CLKPWR_SDRCLK_CAL_ON_RTC	_BIT(7)
+#define LPC32XX_CLKPWR_SDRCLK_DQS_DLY(n)	(((n) & 0x1F) << 2)
+#define LPC32XX_CLKPWR_SDRCLK_USE_DDR		_BIT(1)
+#define LPC32XX_CLKPWR_SDRCLK_CLK_DIS		_BIT(0)
+
+/*
+ * clkpwr_ssp_blk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1RX	_BIT(5)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP1TX	_BIT(4)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0RX	_BIT(3)
+#define LPC32XX_CLKPWR_SSPCTRL_DMA_SSP0TX	_BIT(2)
+#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN	_BIT(1)
+#define LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN	_BIT(0)
+
+/*
+ * clkpwr_i2s_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_RX_FOR_TX	_BIT(6)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_TX_FOR_RX	_BIT(5)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA	_BIT(4)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S0_RX_FOR_TX	_BIT(3)
+#define LPC32XX_CLKPWR_I2SCTRL_I2S0_TX_FOR_RX	_BIT(2)
+#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN	_BIT(1)
+#define LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN	_BIT(0)
+
+/*
+ * clkpwr_ms_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS	_BIT(10)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN	_BIT(9)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS	_BIT(8)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS	_BIT(7)
+#define LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS	_BIT(6)
+#define LPC32XX_CLKPWR_MSCARD_SDCARD_EN		_BIT(5)
+#define LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(n)	((n) & 0xF)
+
+/*
+ * clkpwr_macclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_MACCTRL_NO_ENET_PIS	0x00
+#define LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS	0x08
+#define LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS	0x18
+#define LPC32XX_CLKPWR_MACCTRL_PINS_MSK		0x18
+#define LPC32XX_CLKPWR_MACCTRL_DMACLK_EN	_BIT(2)
+#define LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN	_BIT(1)
+#define LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN	_BIT(0)
+
+/*
+ * clkpwr_test_clk_sel register definitions
+ */
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_PERCLK	(0x0 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_RTC		(0x1 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_MOSC	(0x2 << 5)
+#define LPC32XX_CLKPWR_TESTCLK1_SEL_MASK	(0x3 << 5)
+#define LPC32XX_CLKPWR_TESTCLK_TESTCLK1_EN	_BIT(4)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_HCLK	(0x0 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_PERCLK	(0x1 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_USBCLK	(0x2 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC	(0x5 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_PLL397	(0x7 << 1)
+#define LPC32XX_CLKPWR_TESTCLK2_SEL_MASK	(0x7 << 1)
+#define LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN	_BIT(0)
+
+/*
+ * clkpwr_sw_int register definitions
+ */
+#define LPC32XX_CLKPWR_SW_INT(n)		(_BIT(0) | (((n) & 0x7F) << 1))
+#define LPC32XX_CLKPWR_SW_GET_ARG(n)		(((n) & 0xFE) >> 1)
+
+/*
+ * clkpwr_i2c_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE	_BIT(4)
+#define LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE	_BIT(3)
+#define LPC32XX_CLKPWR_I2CCLK_I2C1HI_DRIVE	_BIT(2)
+#define LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN	_BIT(1)
+#define LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN	_BIT(0)
+
+/*
+ * clkpwr_key_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN	0x1
+
+/*
+ * clkpwr_adc_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN	0x1
+
+/*
+ * clkpwr_pwm_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(n)	(((n) & 0xF) << 8)
+#define LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(n)	(((n) & 0xF) << 4)
+#define LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK	0x8
+#define LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN	0x4
+#define LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK	0x2
+#define LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN	0x1
+
+/*
+ * clkpwr_timer_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_PWMCLK_HSTIMER_EN	0x2
+#define LPC32XX_CLKPWR_PWMCLK_WDOG_EN		0x1
+
+/*
+ * clkpwr_timers_pwms_clk_ctrl_1 register definitions
+ */
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN	0x20
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN	0x10
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN	0x08
+#define LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN	0x04
+#define LPC32XX_CLKPWR_TMRPWMCLK_PWM4_EN	0x02
+#define LPC32XX_CLKPWR_TMRPWMCLK_PWM3_EN	0x01
+
+/*
+ * clkpwr_spi_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI2DATIO	0x80
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI2CLK	0x40
+#define LPC32XX_CLKPWR_SPICLK_USE_SPI2		0x20
+#define LPC32XX_CLKPWR_SPICLK_SPI2CLK_EN	0x10
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI1DATIO	0x08
+#define LPC32XX_CLKPWR_SPICLK_SET_SPI1CLK	0x04
+#define LPC32XX_CLKPWR_SPICLK_USE_SPI1		0x02
+#define LPC32XX_CLKPWR_SPICLK_SPI1CLK_EN	0x01
+
+/*
+ * clkpwr_nand_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC	0x20
+#define LPC32XX_CLKPWR_NANDCLK_DMA_RNB		0x10
+#define LPC32XX_CLKPWR_NANDCLK_DMA_INT		0x08
+#define LPC32XX_CLKPWR_NANDCLK_SEL_SLC		0x04
+#define LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN	0x02
+#define LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN	0x01
+
+/*
+ * clkpwr_uart3_clk_ctrl, clkpwr_uart4_clk_ctrl, clkpwr_uart5_clk_ctrl
+ * and clkpwr_uart6_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_UART_Y_DIV(y)		((y) & 0xFF)
+#define LPC32XX_CLKPWR_UART_X_DIV(x)		(((x) & 0xFF) << 8)
+#define LPC32XX_CLKPWR_UART_USE_HCLK		_BIT(16)
+
+/*
+ * clkpwr_irda_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_IRDA_Y_DIV(y)		((y) & 0xFF)
+#define LPC32XX_CLKPWR_IRDA_X_DIV(x)		(((x) & 0xFF) << 8)
+
+/*
+ * clkpwr_uart_clk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN	_BIT(3)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN	_BIT(2)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN	_BIT(1)
+#define LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN	_BIT(0)
+
+/*
+ * clkpwr_dmaclk_ctrl register definitions
+ */
+#define LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN	0x1
+
+/*
+ * clkpwr_autoclock register definitions
+ */
+#define LPC32XX_CLKPWR_AUTOCLK_USB_EN		0x40
+#define LPC32XX_CLKPWR_AUTOCLK_IRAM_EN		0x02
+#define LPC32XX_CLKPWR_AUTOCLK_IROM_EN		0x01
+
+/*
+ * Interrupt controller register offsets
+ */
+#define LPC32XX_INTC_MASK(x)			io_p2v((x) + 0x00)
+#define LPC32XX_INTC_RAW_STAT(x)		io_p2v((x) + 0x04)
+#define LPC32XX_INTC_STAT(x)			io_p2v((x) + 0x08)
+#define LPC32XX_INTC_POLAR(x)			io_p2v((x) + 0x0C)
+#define LPC32XX_INTC_ACT_TYPE(x)		io_p2v((x) + 0x10)
+#define LPC32XX_INTC_TYPE(x)			io_p2v((x) + 0x14)
+
+/*
+ * Timer/counter register offsets
+ */
+#define LCP32XX_TIMER_IR(x)			io_p2v((x) + 0x00)
+#define LCP32XX_TIMER_TCR(x)			io_p2v((x) + 0x04)
+#define LCP32XX_TIMER_TC(x)			io_p2v((x) + 0x08)
+#define LCP32XX_TIMER_PR(x)			io_p2v((x) + 0x0C)
+#define LCP32XX_TIMER_PC(x)			io_p2v((x) + 0x10)
+#define LCP32XX_TIMER_MCR(x)			io_p2v((x) + 0x14)
+#define LCP32XX_TIMER_MR0(x)			io_p2v((x) + 0x18)
+#define LCP32XX_TIMER_MR1(x)			io_p2v((x) + 0x1C)
+#define LCP32XX_TIMER_MR2(x)			io_p2v((x) + 0x20)
+#define LCP32XX_TIMER_MR3(x)			io_p2v((x) + 0x24)
+#define LCP32XX_TIMER_CCR(x)			io_p2v((x) + 0x28)
+#define LCP32XX_TIMER_CR0(x)			io_p2v((x) + 0x2C)
+#define LCP32XX_TIMER_CR1(x)			io_p2v((x) + 0x30)
+#define LCP32XX_TIMER_CR2(x)			io_p2v((x) + 0x34)
+#define LCP32XX_TIMER_CR3(x)			io_p2v((x) + 0x38)
+#define LCP32XX_TIMER_EMR(x)			io_p2v((x) + 0x3C)
+#define LCP32XX_TIMER_CTCR(x)			io_p2v((x) + 0x70)
+
+/*
+ * ir register definitions
+ */
+#define LCP32XX_TIMER_CNTR_MTCH_BIT(n)		(1 << ((n) & 0x3))
+#define LCP32XX_TIMER_CNTR_CAPT_BIT(n)		(1 << (4 + ((n) & 0x3)))
+
+/*
+ * tcr register definitions
+ */
+#define LCP32XX_TIMER_CNTR_TCR_EN		0x1
+#define LCP32XX_TIMER_CNTR_TCR_RESET		0x2
+
+/*
+ * mcr register definitions
+ */
+#define LCP32XX_TIMER_CNTR_MCR_MTCH(n)		(0x1 << ((n) * 3))
+#define LCP32XX_TIMER_CNTR_MCR_RESET(n)		(0x1 << (((n) * 3) + 1))
+#define LCP32XX_TIMER_CNTR_MCR_STOP(n)		(0x1 << (((n) * 3) + 2))
+
+/*
+ * Standard UART register offsets
+ */
+#define LPC32XX_UART_DLL_FIFO(x)		io_p2v((x) + 0x00)
+#define LPC32XX_UART_DLM_IER(x)			io_p2v((x) + 0x04)
+#define LPC32XX_UART_IIR_FCR(x)			io_p2v((x) + 0x08)
+#define LPC32XX_UART_LCR(x)			io_p2v((x) + 0x0C)
+#define LPC32XX_UART_MODEM_CTRL(x)		io_p2v((x) + 0x10)
+#define LPC32XX_UART_LSR(x)			io_p2v((x) + 0x14)
+#define LPC32XX_UART_MODEM_STATUS(x)		io_p2v((x) + 0x18)
+#define LPC32XX_UART_RXLEV(x)			io_p2v((x) + 0x1C)
+
+/*
+ * UART control structure offsets
+ */
+#define _UCREG(x)				io_p2v(\
+						LPC32XX_UART_CTRL_BASE + (x))
+#define LPC32XX_UARTCTL_CTRL			_UCREG(0x00)
+#define LPC32XX_UARTCTL_CLKMODE			_UCREG(0x04)
+#define LPC32XX_UARTCTL_CLOOP			_UCREG(0x08)
+
+/*
+ * ctrl register definitions
+ */
+#define LPC32XX_UART_U3_MD_CTRL_EN		_BIT(11)
+#define LPC32XX_UART_IRRX6_INV_EN		_BIT(10)
+#define LPC32XX_UART_HDPX_EN			_BIT(9)
+#define LPC32XX_UART_UART6_IRDAMOD_BYPASS	_BIT(5)
+#define LPC32XX_RT_IRTX6_INV_EN			_BIT(4)
+#define LPC32XX_RT_IRTX6_INV_MIR_EN		_BIT(3)
+#define LPC32XX_RT_RX_IRPULSE_3_16_115K		_BIT(2)
+#define LPC32XX_RT_TX_IRPULSE_3_16_115K		_BIT(1)
+#define LPC32XX_UART_U5_ROUTE_TO_USB		_BIT(0)
+
+/*
+ * clkmode register definitions
+ */
+#define LPC32XX_UART_ENABLED_CLOCKS(n)		(((n) >> 16) & 0x7F)
+#define LPC32XX_UART_ENABLED_CLOCK(n, u)	(((n) >> (16 + (u))) & 0x1)
+#define LPC32XX_UART_ENABLED_CLKS_ANY		_BIT(14)
+#define LPC32XX_UART_CLKMODE_OFF		0x0
+#define LPC32XX_UART_CLKMODE_ON			0x1
+#define LPC32XX_UART_CLKMODE_AUTO		0x2
+#define LPC32XX_UART_CLKMODE_MASK(u)		(0x3 << ((((u) - 3) * 2) + 4))
+#define LPC32XX_UART_CLKMODE_LOAD(m, u)		((m) << ((((u) - 3) * 2) + 4))
+
+/*
+ * GPIO Module Register offsets
+ */
+#define _GPREG(x)				io_p2v(LPC32XX_GPIO_BASE + (x))
+#define LPC32XX_GPIO_P_MUX_SET			_GPREG(0x100)
+#define LPC32XX_GPIO_P_MUX_CLR			_GPREG(0x104)
+#define LPC32XX_GPIO_P_MUX_STATE		_GPREG(0x108)
+#define LPC32XX_GPIO_P3_MUX_SET			_GPREG(0x110)
+#define LPC32XX_GPIO_P3_MUX_CLR			_GPREG(0x114)
+#define LPC32XX_GPIO_P3_MUX_STATE		_GPREG(0x118)
+#define LPC32XX_GPIO_P0_MUX_SET			_GPREG(0x120)
+#define LPC32XX_GPIO_P0_MUX_CLR			_GPREG(0x124)
+#define LPC32XX_GPIO_P0_MUX_STATE		_GPREG(0x128)
+#define LPC32XX_GPIO_P1_MUX_SET			_GPREG(0x130)
+#define LPC32XX_GPIO_P1_MUX_CLR			_GPREG(0x134)
+#define LPC32XX_GPIO_P1_MUX_STATE		_GPREG(0x138)
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
new file mode 100644
index 000000000000..df3b0dea4d7b
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/system.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/system.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	extern void lpc32xx_watchdog_reset(void);
+
+	switch (mode) {
+	case 's':
+	case 'h':
+		printk(KERN_CRIT "RESET: Rebooting system\n");
+
+		/* Disable interrupts */
+		local_irq_disable();
+
+		lpc32xx_watchdog_reset();
+		break;
+
+	default:
+		/* Do nothing */
+		break;
+	}
+
+	/* Wait for watchdog to reset system */
+	while (1)
+		;
+}
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h
new file mode 100644
index 000000000000..8d4066b16b3f
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/timex.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/timex.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * Rate in Hz of the main system oscillator. This value should match
+ * the value 'MAIN_OSC_FREQ' in platform.h
+ */
+#define CLOCK_TICK_RATE	13000000
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..c142487d299a
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/uncompress.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H
+#define __ASM_ARM_ARCH_UNCOMPRESS_H
+
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+/*
+ * Uncompress output is hardcoded to standard UART 5
+ */
+
+#define UART_FIFO_CTL_TX_RESET	(1 << 2)
+#define UART_STATUS_TX_MT	(1 << 6)
+
+#define _UARTREG(x)		(void __iomem *)(LPC32XX_UART5_BASE + (x))
+
+#define LPC32XX_UART_DLLFIFO_O	0x00
+#define LPC32XX_UART_IIRFCR_O	0x08
+#define LPC32XX_UART_LSR_O	0x14
+
+static inline void putc(int ch)
+{
+	/* Wait for transmit FIFO to empty */
+	while ((__raw_readl(_UARTREG(LPC32XX_UART_LSR_O)) &
+		UART_STATUS_TX_MT) == 0)
+		;
+
+	__raw_writel((u32) ch, _UARTREG(LPC32XX_UART_DLLFIFO_O));
+}
+
+static inline void flush(void)
+{
+	__raw_writel(__raw_readl(_UARTREG(LPC32XX_UART_IIRFCR_O)) |
+		UART_FIFO_CTL_TX_RESET, _UARTREG(LPC32XX_UART_IIRFCR_O));
+}
+
+/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..d1d936c7236d
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-lpc32xx/include/mach/vmalloc.h
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	0xF0000000
+
+#endif
diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c
new file mode 100644
index 000000000000..bd0df26c415b
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/irq.c
@@ -0,0 +1,432 @@
+/*
+ * arch/arm/mach-lpc32xx/irq.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Default value representing the Activation polarity of all internal
+ * interrupt sources
+ */
+#define MIC_APR_DEFAULT		0x3FF0EFE0
+#define SIC1_APR_DEFAULT	0xFBD27186
+#define SIC2_APR_DEFAULT	0x801810C0
+
+/*
+ * Default value representing the Activation Type of all internal
+ * interrupt sources. All are level sensitive.
+ */
+#define MIC_ATR_DEFAULT		0x00000000
+#define SIC1_ATR_DEFAULT	0x00026000
+#define SIC2_ATR_DEFAULT	0x00000000
+
+struct lpc32xx_event_group_regs {
+	void __iomem *enab_reg;
+	void __iomem *edge_reg;
+	void __iomem *maskstat_reg;
+	void __iomem *rawstat_reg;
+};
+
+static const struct lpc32xx_event_group_regs lpc32xx_event_int_regs = {
+	.enab_reg = LPC32XX_CLKPWR_INT_ER,
+	.edge_reg = LPC32XX_CLKPWR_INT_AP,
+	.maskstat_reg = LPC32XX_CLKPWR_INT_SR,
+	.rawstat_reg = LPC32XX_CLKPWR_INT_RS,
+};
+
+static const struct lpc32xx_event_group_regs lpc32xx_event_pin_regs = {
+	.enab_reg = LPC32XX_CLKPWR_PIN_ER,
+	.edge_reg = LPC32XX_CLKPWR_PIN_AP,
+	.maskstat_reg = LPC32XX_CLKPWR_PIN_SR,
+	.rawstat_reg = LPC32XX_CLKPWR_PIN_RS,
+};
+
+struct lpc32xx_event_info {
+	const struct lpc32xx_event_group_regs *event_group;
+	u32 mask;
+};
+
+/*
+ * Maps an IRQ number to and event mask and register
+ */
+static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
+	[IRQ_LPC32XX_GPI_08] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_08_BIT,
+	},
+	[IRQ_LPC32XX_GPI_09] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_09_BIT,
+	},
+	[IRQ_LPC32XX_GPI_19] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_19_BIT,
+	},
+	[IRQ_LPC32XX_GPI_07] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_07_BIT,
+	},
+	[IRQ_LPC32XX_GPI_00] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_00_BIT,
+	},
+	[IRQ_LPC32XX_GPI_01] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_01_BIT,
+	},
+	[IRQ_LPC32XX_GPI_02] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_02_BIT,
+	},
+	[IRQ_LPC32XX_GPI_03] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_03_BIT,
+	},
+	[IRQ_LPC32XX_GPI_04] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_04_BIT,
+	},
+	[IRQ_LPC32XX_GPI_05] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_05_BIT,
+	},
+	[IRQ_LPC32XX_GPI_06] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_00] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_01] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_01_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_02] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_02_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_03] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_03_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_04] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_04_BIT,
+	},
+	[IRQ_LPC32XX_GPIO_05] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_05_BIT,
+	},
+	[IRQ_LPC32XX_KEY] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_KEY_BIT,
+	},
+	[IRQ_LPC32XX_USB_OTG_ATX] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_USBATXINT_BIT,
+	},
+	[IRQ_LPC32XX_USB_HOST] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_USB_BIT,
+	},
+	[IRQ_LPC32XX_RTC] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_RTC_BIT,
+	},
+	[IRQ_LPC32XX_MSTIMER] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT,
+	},
+	[IRQ_LPC32XX_TS_AUX] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_TS_AUX_BIT,
+	},
+	[IRQ_LPC32XX_TS_P] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_TS_P_BIT,
+	},
+	[IRQ_LPC32XX_TS_IRQ] = {
+		.event_group = &lpc32xx_event_int_regs,
+		.mask = LPC32XX_CLKPWR_INTSRC_ADC_BIT,
+	},
+};
+
+static void get_controller(unsigned int irq, unsigned int *base,
+	unsigned int *irqbit)
+{
+	if (irq < 32) {
+		*base = LPC32XX_MIC_BASE;
+		*irqbit = 1 << irq;
+	} else if (irq < 64) {
+		*base = LPC32XX_SIC1_BASE;
+		*irqbit = 1 << (irq - 32);
+	} else {
+		*base = LPC32XX_SIC2_BASE;
+		*irqbit = 1 << (irq - 64);
+	}
+}
+
+static void lpc32xx_mask_irq(unsigned int irq)
+{
+	unsigned int reg, ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) & ~mask;
+	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
+}
+
+static void lpc32xx_unmask_irq(unsigned int irq)
+{
+	unsigned int reg, ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	reg = __raw_readl(LPC32XX_INTC_MASK(ctrl)) | mask;
+	__raw_writel(reg, LPC32XX_INTC_MASK(ctrl));
+}
+
+static void lpc32xx_ack_irq(unsigned int irq)
+{
+	unsigned int ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	__raw_writel(mask, LPC32XX_INTC_RAW_STAT(ctrl));
+
+	/* Also need to clear pending wake event */
+	if (lpc32xx_events[irq].mask != 0)
+		__raw_writel(lpc32xx_events[irq].mask,
+			lpc32xx_events[irq].event_group->rawstat_reg);
+}
+
+static void __lpc32xx_set_irq_type(unsigned int irq, int use_high_level,
+	int use_edge)
+{
+	unsigned int reg, ctrl, mask;
+
+	get_controller(irq, &ctrl, &mask);
+
+	/* Activation level, high or low */
+	reg = __raw_readl(LPC32XX_INTC_POLAR(ctrl));
+	if (use_high_level)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	__raw_writel(reg, LPC32XX_INTC_POLAR(ctrl));
+
+	/* Activation type, edge or level */
+	reg = __raw_readl(LPC32XX_INTC_ACT_TYPE(ctrl));
+	if (use_edge)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	__raw_writel(reg, LPC32XX_INTC_ACT_TYPE(ctrl));
+
+	/* Use same polarity for the wake events */
+	if (lpc32xx_events[irq].mask != 0) {
+		reg = __raw_readl(lpc32xx_events[irq].event_group->edge_reg);
+
+		if (use_high_level)
+			reg |= lpc32xx_events[irq].mask;
+		else
+			reg &= ~lpc32xx_events[irq].mask;
+
+		__raw_writel(reg, lpc32xx_events[irq].event_group->edge_reg);
+	}
+}
+
+static int lpc32xx_set_irq_type(unsigned int irq, unsigned int type)
+{
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		/* Rising edge sensitive */
+		__lpc32xx_set_irq_type(irq, 1, 1);
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		/* Falling edge sensitive */
+		__lpc32xx_set_irq_type(irq, 0, 1);
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		/* Low level sensitive */
+		__lpc32xx_set_irq_type(irq, 0, 0);
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		/* High level sensitive */
+		__lpc32xx_set_irq_type(irq, 1, 0);
+		break;
+
+	/* Other modes are not supported */
+	default:
+		return -EINVAL;
+	}
+
+	/* Ok to use the level handler for all types */
+	set_irq_handler(irq, handle_level_irq);
+
+	return 0;
+}
+
+static int lpc32xx_irq_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long eventreg;
+
+	if (lpc32xx_events[irqno].mask != 0) {
+		eventreg = __raw_readl(lpc32xx_events[irqno].
+			event_group->enab_reg);
+
+		if (state)
+			eventreg |= lpc32xx_events[irqno].mask;
+		else
+			eventreg &= ~lpc32xx_events[irqno].mask;
+
+		__raw_writel(eventreg,
+			lpc32xx_events[irqno].event_group->enab_reg);
+
+		return 0;
+	}
+
+	/* Clear event */
+	__raw_writel(lpc32xx_events[irqno].mask,
+		lpc32xx_events[irqno].event_group->rawstat_reg);
+
+	return -ENODEV;
+}
+
+static void __init lpc32xx_set_default_mappings(unsigned int apr,
+	unsigned int atr, unsigned int offset)
+{
+	unsigned int i;
+
+	/* Set activation levels for each interrupt */
+	i = 0;
+	while (i < 32) {
+		__lpc32xx_set_irq_type(offset + i, ((apr >> i) & 0x1),
+			((atr >> i) & 0x1));
+		i++;
+	}
+}
+
+static struct irq_chip lpc32xx_irq_chip = {
+	.ack = lpc32xx_ack_irq,
+	.mask = lpc32xx_mask_irq,
+	.unmask = lpc32xx_unmask_irq,
+	.set_type = lpc32xx_set_irq_type,
+	.set_wake = lpc32xx_irq_wake
+};
+
+static void lpc32xx_sic1_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC1_BASE));
+
+	while (ints != 0) {
+		int irqno = fls(ints) - 1;
+
+		ints &= ~(1 << irqno);
+
+		generic_handle_irq(LPC32XX_SIC1_IRQ(irqno));
+	}
+}
+
+static void lpc32xx_sic2_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long ints = __raw_readl(LPC32XX_INTC_STAT(LPC32XX_SIC2_BASE));
+
+	while (ints != 0) {
+		int irqno = fls(ints) - 1;
+
+		ints &= ~(1 << irqno);
+
+		generic_handle_irq(LPC32XX_SIC2_IRQ(irqno));
+	}
+}
+
+void __init lpc32xx_init_irq(void)
+{
+	unsigned int i;
+
+	/* Setup MIC */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
+	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_MIC_BASE));
+	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_MIC_BASE));
+
+	/* Setup SIC1 */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
+	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+
+	/* Setup SIC2 */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
+	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+
+	/* Configure supported IRQ's */
+	for (i = 0; i < NR_IRQS; i++) {
+		set_irq_chip(i, &lpc32xx_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	/* Set default mappings */
+	lpc32xx_set_default_mappings(MIC_APR_DEFAULT, MIC_ATR_DEFAULT, 0);
+	lpc32xx_set_default_mappings(SIC1_APR_DEFAULT, SIC1_ATR_DEFAULT, 32);
+	lpc32xx_set_default_mappings(SIC2_APR_DEFAULT, SIC2_ATR_DEFAULT, 64);
+
+	/* mask all interrupts except SUBIRQ */
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_MIC_BASE));
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
+	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
+
+	/* MIC SUBIRQx interrupts will route handling to the chain handlers */
+	set_irq_chained_handler(IRQ_LPC32XX_SUB1IRQ, lpc32xx_sic1_handler);
+	set_irq_chained_handler(IRQ_LPC32XX_SUB2IRQ, lpc32xx_sic2_handler);
+
+	/* Initially disable all wake events */
+	__raw_writel(0, LPC32XX_CLKPWR_P01_ER);
+	__raw_writel(0, LPC32XX_CLKPWR_INT_ER);
+	__raw_writel(0, LPC32XX_CLKPWR_PIN_ER);
+
+	/*
+	 * Default wake activation polarities, all pin sources are low edge
+	 * triggered
+	 */
+	__raw_writel(LPC32XX_CLKPWR_INTSRC_TS_P_BIT |
+		LPC32XX_CLKPWR_INTSRC_MSTIMER_BIT |
+		LPC32XX_CLKPWR_INTSRC_RTC_BIT,
+		LPC32XX_CLKPWR_INT_AP);
+	__raw_writel(0, LPC32XX_CLKPWR_PIN_AP);
+
+	/* Clear latched wake event states */
+	__raw_writel(__raw_readl(LPC32XX_CLKPWR_PIN_RS),
+		LPC32XX_CLKPWR_PIN_RS);
+	__raw_writel(__raw_readl(LPC32XX_CLKPWR_INT_RS),
+		LPC32XX_CLKPWR_INT_RS);
+}
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
new file mode 100644
index 000000000000..7993b096778e
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -0,0 +1,390 @@
+/*
+ * arch/arm/mach-lpc32xx/phy3250.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/amba/pl022.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+/*
+ * Mapped GPIOLIB GPIOs
+ */
+#define SPI0_CS_GPIO	LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+#define LCD_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
+#define BKL_POWER_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
+#define LED_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 1)
+
+/*
+ * AMBA LCD controller
+ */
+static struct clcd_panel conn_lcd_panel = {
+	.mode		= {
+		.name		= "QVGA portrait",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 191828,
+		.left_margin	= 22,
+		.right_margin	= 11,
+		.upper_margin	= 2,
+		.lower_margin	= 1,
+		.hsync_len	= 5,
+		.vsync_len	= 2,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= (TIM2_IVS | TIM2_IHS),
+	.cntl		= (CNTL_BGR | CNTL_LCDTFT | CNTL_LCDVCOMP(1) |
+				CNTL_LCDBPP16_565),
+	.bpp		= 16,
+};
+#define PANEL_SIZE (3 * SZ_64K)
+
+static int lpc32xx_clcd_setup(struct clcd_fb *fb)
+{
+	dma_addr_t dma;
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
+		PANEL_SIZE, &dma, GFP_KERNEL);
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+		return -ENOMEM;
+	}
+
+	fb->fb.fix.smem_start = dma;
+	fb->fb.fix.smem_len = PANEL_SIZE;
+	fb->panel = &conn_lcd_panel;
+
+	if (gpio_request(LCD_POWER_GPIO, "LCD power"))
+		printk(KERN_ERR "Error requesting gpio %u",
+			LCD_POWER_GPIO);
+	else if (gpio_direction_output(LCD_POWER_GPIO, 1))
+		printk(KERN_ERR "Error setting gpio %u to output",
+			LCD_POWER_GPIO);
+
+	if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
+		printk(KERN_ERR "Error requesting gpio %u",
+			BKL_POWER_GPIO);
+	else if (gpio_direction_output(BKL_POWER_GPIO, 1))
+		printk(KERN_ERR "Error setting gpio %u to output",
+			BKL_POWER_GPIO);
+
+	return 0;
+}
+
+static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma,
+		fb->fb.screen_base, fb->fb.fix.smem_start,
+		fb->fb.fix.smem_len);
+}
+
+static void lpc32xx_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+		fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+/*
+ * On some early LCD modules (1307.0), the backlight logic is inverted.
+ * For those board variants, swap the disable and enable states for
+ * BKL_POWER_GPIO.
+*/
+static void clcd_disable(struct clcd_fb *fb)
+{
+	gpio_set_value(BKL_POWER_GPIO, 0);
+	gpio_set_value(LCD_POWER_GPIO, 0);
+}
+
+static void clcd_enable(struct clcd_fb *fb)
+{
+	gpio_set_value(BKL_POWER_GPIO, 1);
+	gpio_set_value(LCD_POWER_GPIO, 1);
+}
+
+static struct clcd_board lpc32xx_clcd_data = {
+	.name		= "Phytec LCD",
+	.check		= clcdfb_check,
+	.decode		= clcdfb_decode,
+	.disable	= clcd_disable,
+	.enable		= clcd_enable,
+	.setup		= lpc32xx_clcd_setup,
+	.mmap		= lpc32xx_clcd_mmap,
+	.remove		= lpc32xx_clcd_remove,
+};
+
+static struct amba_device lpc32xx_clcd_device = {
+	.dev				= {
+		.coherent_dma_mask	= ~0,
+		.init_name		= "dev:clcd",
+		.platform_data		= &lpc32xx_clcd_data,
+	},
+	.res				= {
+		.start			= LPC32XX_LCD_BASE,
+		.end			= (LPC32XX_LCD_BASE + SZ_4K - 1),
+		.flags			= IORESOURCE_MEM,
+	},
+	.dma_mask			= ~0,
+	.irq				= {IRQ_LPC32XX_LCD, NO_IRQ},
+};
+
+/*
+ * AMBA SSP (SPI)
+ */
+static void phy3250_spi_cs_set(u32 control)
+{
+	gpio_set_value(SPI0_CS_GPIO, (int) control);
+}
+
+static struct pl022_config_chip spi0_chip_info = {
+	.com_mode		= INTERRUPT_TRANSFER,
+	.iface			= SSP_INTERFACE_MOTOROLA_SPI,
+	.hierarchy		= SSP_MASTER,
+	.slave_tx_disable	= 0,
+	.rx_lev_trig		= SSP_RX_4_OR_MORE_ELEM,
+	.tx_lev_trig		= SSP_TX_4_OR_MORE_EMPTY_LOC,
+	.ctrl_len		= SSP_BITS_8,
+	.wait_state		= SSP_MWIRE_WAIT_ZERO,
+	.duplex			= SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	.cs_control		= phy3250_spi_cs_set,
+};
+
+static struct pl022_ssp_controller lpc32xx_ssp0_data = {
+	.bus_id			= 0,
+	.num_chipselect		= 1,
+	.enable_dma		= 0,
+};
+
+static struct amba_device lpc32xx_ssp0_device = {
+	.dev				= {
+		.coherent_dma_mask	= ~0,
+		.init_name		= "dev:ssp0",
+		.platform_data		= &lpc32xx_ssp0_data,
+	},
+	.res				= {
+		.start			= LPC32XX_SSP0_BASE,
+		.end			= (LPC32XX_SSP0_BASE + SZ_4K - 1),
+		.flags			= IORESOURCE_MEM,
+	},
+	.dma_mask			= ~0,
+	.irq				= {IRQ_LPC32XX_SSP0, NO_IRQ},
+};
+
+/* AT25 driver registration */
+static int __init phy3250_spi_board_register(void)
+{
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	static struct spi_board_info info[] = {
+		{
+			.modalias = "spidev",
+			.max_speed_hz = 5000000,
+			.bus_num = 0,
+			.chip_select = 0,
+			.controller_data = &spi0_chip_info,
+		},
+	};
+
+#else
+	static struct spi_eeprom eeprom = {
+		.name = "at25256a",
+		.byte_len = 0x8000,
+		.page_size = 64,
+		.flags = EE_ADDR2,
+	};
+
+	static struct spi_board_info info[] = {
+		{
+			.modalias = "at25",
+			.max_speed_hz = 5000000,
+			.bus_num = 0,
+			.chip_select = 0,
+			.mode = SPI_MODE_0,
+			.platform_data = &eeprom,
+			.controller_data = &spi0_chip_info,
+		},
+	};
+#endif
+	return spi_register_board_info(info, ARRAY_SIZE(info));
+}
+arch_initcall(phy3250_spi_board_register);
+
+static struct i2c_board_info __initdata phy3250_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+static struct gpio_led phy_leds[] = {
+	{
+		.name			= "led0",
+		.gpio			= LED_GPIO,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+};
+
+static struct gpio_led_platform_data led_data = {
+	.leds = phy_leds,
+	.num_leds = ARRAY_SIZE(phy_leds),
+};
+
+static struct platform_device lpc32xx_gpio_led_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &led_data,
+};
+
+static struct platform_device *phy3250_devs[] __initdata = {
+	&lpc32xx_i2c0_device,
+	&lpc32xx_i2c1_device,
+	&lpc32xx_i2c2_device,
+	&lpc32xx_watchdog_device,
+	&lpc32xx_gpio_led_device,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&lpc32xx_clcd_device,
+	&lpc32xx_ssp0_device,
+};
+
+/*
+ * Board specific functions
+ */
+static void __init phy3250_board_init(void)
+{
+	u32 tmp;
+	int i;
+
+	lpc32xx_gpio_init();
+
+	/* Register GPIOs used on this board */
+	if (gpio_request(SPI0_CS_GPIO, "spi0 cs"))
+		printk(KERN_ERR "Error requesting gpio %u",
+			SPI0_CS_GPIO);
+	else if (gpio_direction_output(SPI0_CS_GPIO, 1))
+		printk(KERN_ERR "Error setting gpio %u to output",
+			SPI0_CS_GPIO);
+
+	/* Setup network interface for RMII mode */
+	tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
+	tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
+	tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
+	__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
+
+	/* Setup SLC NAND controller muxing */
+	__raw_writel(LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
+		LPC32XX_CLKPWR_NAND_CLK_CTRL);
+
+	/* Setup LCD muxing to RGB565 */
+	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL) &
+		~(LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_MSK |
+		LPC32XX_CLKPWR_LCDCTRL_PSCALE_MSK);
+	tmp |= LPC32XX_CLKPWR_LCDCTRL_LCDTYPE_TFT16;
+	__raw_writel(tmp, LPC32XX_CLKPWR_LCDCLK_CTRL);
+
+	/* Set up I2C pull levels */
+	tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
+	tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE |
+		LPC32XX_CLKPWR_I2CCLK_I2C2HI_DRIVE;
+	__raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
+
+	/* Disable IrDA pulsing support on UART6 */
+	tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+	tmp |= LPC32XX_UART_UART6_IRDAMOD_BYPASS;
+	__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
+	/* Enable DMA for I2S1 channel */
+	tmp = __raw_readl(LPC32XX_CLKPWR_I2S_CLK_CTRL);
+	tmp = LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA;
+	__raw_writel(tmp, LPC32XX_CLKPWR_I2S_CLK_CTRL);
+
+	lpc32xx_serial_init();
+
+	/*
+	 * AMBA peripheral clocks need to be enabled prior to AMBA device
+	 * detection or a data fault will occur, so enable the clocks
+	 * here. However, we don't want to enable them if the peripheral
+	 * isn't included in the image
+	 */
+#ifdef CONFIG_FB_ARMCLCD
+	tmp = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
+	__raw_writel((tmp | LPC32XX_CLKPWR_LCDCTRL_CLK_EN),
+		LPC32XX_CLKPWR_LCDCLK_CTRL);
+#endif
+#ifdef CONFIG_SPI_PL022
+	tmp = __raw_readl(LPC32XX_CLKPWR_SSP_CLK_CTRL);
+	__raw_writel((tmp | LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN),
+		LPC32XX_CLKPWR_SSP_CLK_CTRL);
+#endif
+
+	platform_add_devices(phy3250_devs, ARRAY_SIZE(phy3250_devs));
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+	/* Test clock needed for UDA1380 initial init */
+	__raw_writel(LPC32XX_CLKPWR_TESTCLK2_SEL_MOSC |
+		LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN,
+		LPC32XX_CLKPWR_TEST_CLK_SEL);
+
+	i2c_register_board_info(0, phy3250_i2c_board_info,
+		ARRAY_SIZE(phy3250_i2c_board_info));
+}
+
+static int __init lpc32xx_display_uid(void)
+{
+	u32 uid[4];
+
+	lpc32xx_get_uid(uid);
+
+	printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
+		uid[3], uid[2], uid[1], uid[0]);
+
+	return 1;
+}
+arch_initcall(lpc32xx_display_uid);
+
+MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
+	/* Maintainer: Kevin Wells, NXP Semiconductors */
+	.boot_params	= 0x80000100,
+	.map_io		= lpc32xx_map_io,
+	.init_irq	= lpc32xx_init_irq,
+	.timer		= &lpc32xx_timer,
+	.init_machine	= phy3250_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
new file mode 100644
index 000000000000..a6e2aed9a49f
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -0,0 +1,146 @@
+/*
+ * arch/arm/mach-lpc32xx/pm.c
+ *
+ * Original authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ * Modified by Kevin Wells <kevin.wells@nxp.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * LPC32XX CPU and system power management
+ *
+ * The LCP32XX has three CPU modes for controlling system power: run,
+ * direct-run, and halt modes. When switching between halt and run modes,
+ * the CPU transistions through direct-run mode. For Linux, direct-run
+ * mode is not used in normal operation. Halt mode is used when the
+ * system is fully suspended.
+ *
+ * Run mode:
+ * The ARM CPU clock (HCLK_PLL), HCLK bus clock, and PCLK bus clocks are
+ * derived from the HCLK PLL. The HCLK and PCLK bus rates are divided from
+ * the HCLK_PLL rate. Linux runs in this mode.
+ *
+ * Direct-run mode:
+ * The ARM CPU clock, HCLK bus clock, and PCLK bus clocks are driven from
+ * SYSCLK. SYSCLK is usually around 13MHz, but may vary based on SYSCLK
+ * source or the frequency of the main oscillator. In this mode, the
+ * HCLK_PLL can be safely enabled, changed, or disabled.
+ *
+ * Halt mode:
+ * SYSCLK is gated off and the CPU and system clocks are halted.
+ * Peripherals based on the 32KHz oscillator clock (ie, RTC, touch,
+ * key scanner, etc.) still operate if enabled. In this state, an enabled
+ * system event (ie, GPIO state change, RTC match, key press, etc.) will
+ * wake the system up back into direct-run mode.
+ *
+ * DRAM refresh
+ * DRAM clocking and refresh are slightly different for systems with DDR
+ * DRAM or regular SDRAM devices. If SDRAM is used in the system, the
+ * SDRAM will still be accessible in direct-run mode. In DDR based systems,
+ * a transistion to direct-run mode will stop all DDR accesses (no clocks).
+ * Because of this, the code to switch power modes and the code to enter
+ * and exit DRAM self-refresh modes must not be executed in DRAM. A small
+ * section of IRAM is used instead for this.
+ *
+ * Suspend is handled with the following logic:
+ *  Backup a small area of IRAM used for the suspend code
+ *  Copy suspend code to IRAM
+ *  Transfer control to code in IRAM
+ *  Places DRAMs in self-refresh mode
+ *  Enter direct-run mode
+ *  Save state of HCLK_PLL PLL
+ *  Disable HCLK_PLL PLL
+ *  Enter halt mode - CPU and buses will stop
+ *  System enters direct-run mode when an enabled event occurs
+ *  HCLK PLL state is restored
+ *  Run mode is entered
+ *  DRAMS are placed back into normal mode
+ *  Code execution returns from IRAM
+ *  IRAM code are used for suspend is restored
+ *  Suspend mode is exited
+ */
+
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+#include "clock.h"
+
+#define TEMP_IRAM_AREA  IO_ADDRESS(LPC32XX_IRAM_BASE)
+
+/*
+ * Both STANDBY and MEM suspend states are handled the same with no
+ * loss of CPU or memory state
+ */
+static int lpc32xx_pm_enter(suspend_state_t state)
+{
+	int (*lpc32xx_suspend_ptr) (void);
+	void *iram_swap_area;
+
+	/* Allocate some space for temporary IRAM storage */
+	iram_swap_area = kmalloc(lpc32xx_sys_suspend_sz, GFP_KERNEL);
+	if (!iram_swap_area) {
+		printk(KERN_ERR
+		       "PM Suspend: cannot allocate memory to save portion "
+			"of SRAM\n");
+		return -ENOMEM;
+	}
+
+	/* Backup a small area of IRAM used for the suspend code */
+	memcpy(iram_swap_area, (void *) TEMP_IRAM_AREA,
+		lpc32xx_sys_suspend_sz);
+
+	/*
+	 * Copy code to suspend system into IRAM. The suspend code
+	 * needs to run from IRAM as DRAM may no longer be available
+	 * when the PLL is stopped.
+	 */
+	memcpy((void *) TEMP_IRAM_AREA, &lpc32xx_sys_suspend,
+		lpc32xx_sys_suspend_sz);
+	flush_icache_range((unsigned long)TEMP_IRAM_AREA,
+		(unsigned long)(TEMP_IRAM_AREA) + lpc32xx_sys_suspend_sz);
+
+	/* Transfer to suspend code in IRAM */
+	lpc32xx_suspend_ptr = (void *) TEMP_IRAM_AREA;
+	flush_cache_all();
+	(void) lpc32xx_suspend_ptr();
+
+	/* Restore original IRAM contents */
+	memcpy((void *) TEMP_IRAM_AREA, iram_swap_area,
+		lpc32xx_sys_suspend_sz);
+
+	kfree(iram_swap_area);
+
+	return 0;
+}
+
+static struct platform_suspend_ops lpc32xx_pm_ops = {
+	.valid	= suspend_valid_only_mem,
+	.enter	= lpc32xx_pm_enter,
+};
+
+#define EMC_DYN_MEM_CTRL_OFS 0x20
+#define EMC_SRMMC           (1 << 3)
+#define EMC_CTRL_REG io_p2v(LPC32XX_EMC_BASE + EMC_DYN_MEM_CTRL_OFS)
+static int __init lpc32xx_pm_init(void)
+{
+	/*
+	 * Setup SDRAM self-refresh clock to automatically disable o
+	 * start of self-refresh. This only needs to be done once.
+	 */
+	__raw_writel(__raw_readl(EMC_CTRL_REG) | EMC_SRMMC, EMC_CTRL_REG);
+
+	suspend_set_ops(&lpc32xx_pm_ops);
+
+	return 0;
+}
+arch_initcall(lpc32xx_pm_init);
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
new file mode 100644
index 000000000000..429cfdbb2b3d
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -0,0 +1,190 @@
+/*
+ * arch/arm/mach-lpc32xx/serial.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+#define LPC32XX_SUART_FIFO_SIZE	64
+
+/* Standard 8250/16550 compatible serial ports */
+static struct plat_serial8250_port serial_std_platform_data[] = {
+#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
+	{
+		.membase        = io_p2v(LPC32XX_UART5_BASE),
+		.mapbase        = LPC32XX_UART5_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR5,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
+	{
+		.membase	= io_p2v(LPC32XX_UART3_BASE),
+		.mapbase        = LPC32XX_UART3_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR3,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
+	{
+		.membase	= io_p2v(LPC32XX_UART4_BASE),
+		.mapbase        = LPC32XX_UART4_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR4,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
+	{
+		.membase	= io_p2v(LPC32XX_UART6_BASE),
+		.mapbase        = LPC32XX_UART6_BASE,
+		.irq		= IRQ_LPC32XX_UART_IIR6,
+		.uartclk	= LPC32XX_MAIN_OSC_FREQ,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM32,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
+					UPF_SKIP_TEST,
+	},
+#endif
+	{ },
+};
+
+struct uartinit {
+	char *uart_ck_name;
+	u32 ck_mode_mask;
+	void __iomem *pdiv_clk_reg;
+};
+
+static struct uartinit uartinit_data[] __initdata = {
+#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
+	{
+		.uart_ck_name = "uart5_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
+	{
+		.uart_ck_name = "uart3_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
+	{
+		.uart_ck_name = "uart4_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+	},
+#endif
+#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
+	{
+		.uart_ck_name = "uart6_ck",
+		.ck_mode_mask =
+			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
+		.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+	},
+#endif
+};
+
+static struct platform_device serial_std_platform_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_std_platform_data,
+	},
+};
+
+static struct platform_device *lpc32xx_serial_devs[] __initdata = {
+	&serial_std_platform_device,
+};
+
+void __init lpc32xx_serial_init(void)
+{
+	u32 tmp, clkmodes = 0;
+	struct clk *clk;
+	unsigned int puart;
+	int i, j;
+
+	/* UART clocks are off, let clock driver manage them */
+	__raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL);
+
+	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
+		clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
+		if (!IS_ERR(clk)) {
+			clk_enable(clk);
+			serial_std_platform_data[i].uartclk =
+				clk_get_rate(clk);
+		}
+
+		/* Fall back on main osc rate if clock rate return fails */
+		if (serial_std_platform_data[i].uartclk == 0)
+			serial_std_platform_data[i].uartclk =
+				LPC32XX_MAIN_OSC_FREQ;
+
+		/* Setup UART clock modes for all UARTs, disable autoclock */
+		clkmodes |= uartinit_data[i].ck_mode_mask;
+
+		/* pre-UART clock divider set to 1 */
+		__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+	}
+
+	/* This needs to be done after all UART clocks are setup */
+	__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
+	for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+		/* Force a flush of the RX FIFOs to work around a HW bug */
+		puart = serial_std_platform_data[i].mapbase;
+		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+		j = LPC32XX_SUART_FIFO_SIZE;
+		while (j--)
+			tmp = __raw_readl(LPC32XX_UART_DLL_FIFO(puart));
+		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
+	}
+
+	/* Disable UART5->USB transparent mode or USB won't work */
+	tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
+	tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
+	__raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
+
+	platform_add_devices(lpc32xx_serial_devs,
+		ARRAY_SIZE(lpc32xx_serial_devs));
+}
diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S
new file mode 100644
index 000000000000..374f9f07fe48
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/suspend.S
@@ -0,0 +1,151 @@
+/*
+ * arch/arm/mach-lpc32xx/suspend.S
+ *
+ * Original authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
+ * Modified by Kevin Wells <kevin.wells@nxp.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
+
+/* Using named register defines makes the code easier to follow */
+#define WORK1_REG			r0
+#define WORK2_REG			r1
+#define SAVED_HCLK_DIV_REG		r2
+#define SAVED_HCLK_PLL_REG		r3
+#define SAVED_DRAM_CLKCTRL_REG		r4
+#define SAVED_PWR_CTRL_REG		r5
+#define CLKPWRBASE_REG			r6
+#define EMCBASE_REG			r7
+
+#define LPC32XX_EMC_STATUS_OFFS		0x04
+#define LPC32XX_EMC_STATUS_BUSY		0x1
+#define LPC32XX_EMC_STATUS_SELF_RFSH	0x4
+
+#define LPC32XX_CLKPWR_PWR_CTRL_OFFS	0x44
+#define LPC32XX_CLKPWR_HCLK_DIV_OFFS	0x40
+#define LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS 0x58
+
+#define CLKPWR_PCLK_DIV_MASK		0xFFFFFE7F
+
+	.text
+
+ENTRY(lpc32xx_sys_suspend)
+	@ Save a copy of the used registers in IRAM, r0 is corrupted
+	adr	r0, tmp_stack_end
+	stmfd	r0!, {r3 - r7, sp, lr}
+
+	@ Load a few common register addresses
+	adr	WORK1_REG, reg_bases
+	ldr	CLKPWRBASE_REG, [WORK1_REG, #0]
+	ldr	EMCBASE_REG, [WORK1_REG, #4]
+
+	ldr	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	orr	WORK1_REG, SAVED_PWR_CTRL_REG, #LPC32XX_CLKPWR_SDRAM_SELF_RFSH
+
+	@ Wait for SDRAM busy status to go busy and then idle
+	@ This guarantees a small windows where DRAM isn't busy
+1:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	bne	1b @ Branch while idle
+2:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_BUSY
+	beq	2b @ Branch until idle
+
+	@ Setup self-refresh with support for manual exit of
+	@ self-refresh mode
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	orr	WORK2_REG, WORK1_REG, #LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
+	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Wait for self-refresh acknowledge, clocks to the DRAM device
+	@ will automatically stop on start of self-refresh
+3:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+	cmp	WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+	bne	3b @ Branch until self-refresh mode starts
+
+	@ Enter direct-run mode from run mode
+	bic	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_SELECT_RUN_MODE
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Safe disable of DRAM clock in EMC block, prevents DDR sync
+	@ issues on restart
+	ldr	SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+	and	WORK2_REG, SAVED_HCLK_DIV_REG, #CLKPWR_PCLK_DIV_MASK
+	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+
+	@ Save HCLK PLL state and disable HCLK PLL
+	ldr	SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+	bic	WORK2_REG, SAVED_HCLK_PLL_REG, #LPC32XX_CLKPWR_HCLKPLL_POWER_UP
+	str	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+
+	@ Enter stop mode until an enabled event occurs
+	orr	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	.rept 9
+	nop
+	.endr
+
+	@ Clear stop status
+	bic	WORK1_REG, WORK1_REG, #LPC32XX_CLKPWR_STOP_MODE_CTRL
+
+	@ Restore original HCLK PLL value and wait for PLL lock
+	str	SAVED_HCLK_PLL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+4:
+	ldr	WORK2_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_HCLKPLL_CTRL_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_CLKPWR_HCLKPLL_PLL_STS
+	bne	4b
+
+	@ Re-enter run mode with self-refresh flag cleared, but no DRAM
+	@ update yet. DRAM is still in self-refresh
+	str	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Restore original DRAM clock mode to restore DRAM clocks
+	str	SAVED_HCLK_DIV_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_HCLK_DIV_OFFS]
+
+	@ Clear self-refresh mode
+	orr	WORK1_REG, SAVED_PWR_CTRL_REG,\
+		#LPC32XX_CLKPWR_UPD_SDRAM_SELF_RFSH
+	str	WORK1_REG, [CLKPWRBASE_REG, #LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+	str	SAVED_PWR_CTRL_REG, [CLKPWRBASE_REG,\
+		#LPC32XX_CLKPWR_PWR_CTRL_OFFS]
+
+	@ Wait for EMC to clear self-refresh mode
+5:
+	ldr	WORK2_REG, [EMCBASE_REG, #LPC32XX_EMC_STATUS_OFFS]
+	and	WORK2_REG, WORK2_REG, #LPC32XX_EMC_STATUS_SELF_RFSH
+	bne	5b @ Branch until self-refresh has exited
+
+	@ restore regs and return
+	adr	r0, tmp_stack
+	ldmfd	r0!, {r3 - r7, sp, pc}
+
+reg_bases:
+	.long	IO_ADDRESS(LPC32XX_CLK_PM_BASE)
+	.long	IO_ADDRESS(LPC32XX_EMC_BASE)
+
+tmp_stack:
+	.long	0, 0, 0, 0, 0, 0, 0
+tmp_stack_end:
+
+ENTRY(lpc32xx_sys_suspend_sz)
+	.word	. - lpc32xx_sys_suspend
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
new file mode 100644
index 000000000000..630dd4a74b26
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -0,0 +1,182 @@
+/*
+ * arch/arm/mach-lpc32xx/timer.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2009 - 2010 NXP Semiconductors
+ * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven
+ *                    Ed Schouten <e.schouten@fontys.nl>
+ *                    Laurens Timmermans <l.timmermans@fontys.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/err.h>
+#include <linux/clockchips.h>
+
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include "common.h"
+
+static cycle_t lpc32xx_clksrc_read(struct clocksource *cs)
+{
+	return (cycle_t)__raw_readl(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE));
+}
+
+static struct clocksource lpc32xx_clksrc = {
+	.name	= "lpc32xx_clksrc",
+	.shift	= 24,
+	.rating	= 300,
+	.read	= lpc32xx_clksrc_read,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int lpc32xx_clkevt_next_event(unsigned long delta,
+    struct clock_event_device *dev)
+{
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+	__raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+
+	return 0;
+}
+
+static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
+    struct clock_event_device *dev)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		WARN_ON(1);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		/*
+		 * Disable the timer. When using oneshot, we must also
+		 * disable the timer to wait for the first call to
+		 * set_next_event().
+		 */
+		__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device lpc32xx_clkevt = {
+	.name		= "lpc32xx_clkevt",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.rating		= 300,
+	.set_next_event	= lpc32xx_clkevt_next_event,
+	.set_mode	= lpc32xx_clkevt_mode,
+};
+
+static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &lpc32xx_clkevt;
+
+	/* Clear match */
+	__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
+		LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction lpc32xx_timer_irq = {
+	.name		= "LPC32XX Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= lpc32xx_timer_interrupt,
+};
+
+/*
+ * The clock management driver isn't initialized at this point, so the
+ * clocks need to be enabled here manually and then tagged as used in
+ * the clock driver initialization
+ */
+static void __init lpc32xx_timer_init(void)
+{
+	u32 clkrate, pllreg;
+
+	/* Enable timer clock */
+	__raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN |
+		LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
+		LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1);
+
+	/*
+	 * The clock driver isn't initialized at this point. So determine if
+	 * the SYSCLK is driven from the PLL397 or main oscillator and then use
+	 * it to compute the PLL frequency and the PCLK divider to get the base
+	 * timer rates. This rate is needed to compute the tick rate.
+	 */
+	if (clk_is_sysclk_mainosc() != 0)
+		clkrate = LPC32XX_MAIN_OSC_FREQ;
+	else
+		clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ;
+
+	/* Get ARM HCLKPLL register and convert it into a frequency */
+	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
+	clkrate = clk_get_pllrate_from_reg(clkrate, pllreg);
+
+	/* Get PCLK divider and divide ARM PLL clock by it to get timer rate */
+	clkrate = clkrate / clk_get_pclk_div();
+
+	/* Initial timer setup */
+	__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
+		LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+	__raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) |
+		LCP32XX_TIMER_CNTR_MCR_STOP(0) |
+		LCP32XX_TIMER_CNTR_MCR_RESET(0),
+		LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
+
+	/* Setup tick interrupt */
+	setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
+
+	/* Setup the clockevent structure. */
+	lpc32xx_clkevt.mult = div_sc(clkrate, NSEC_PER_SEC,
+		lpc32xx_clkevt.shift);
+	lpc32xx_clkevt.max_delta_ns = clockevent_delta2ns(-1,
+		&lpc32xx_clkevt);
+	lpc32xx_clkevt.min_delta_ns = clockevent_delta2ns(1,
+		&lpc32xx_clkevt) + 1;
+	lpc32xx_clkevt.cpumask = cpumask_of(0);
+	clockevents_register_device(&lpc32xx_clkevt);
+
+	/* Use timer1 as clock source. */
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+	__raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
+	__raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
+	__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
+		LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+	lpc32xx_clksrc.mult = clocksource_hz2mult(clkrate,
+		lpc32xx_clksrc.shift);
+	clocksource_register(&lpc32xx_clksrc);
+}
+
+struct sys_timer lpc32xx_timer = {
+	.init		= &lpc32xx_timer_init,
+};
+
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 6ab843eaa35b..0711d3b620ad 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -57,6 +57,13 @@ config MACH_MARVELL_JASPER
 	  PXA910-based development board. Since MMP2 is compatible to
 	  ARMv6 architecture.
 
+config MACH_TETON_BGA
+	bool "Marvell's PXA168 Teton BGA Development Board"
+	select CPU_PXA168
+	help
+	  Say 'Y' here if you want to support the Marvell PXA168-based
+	  Teton BGA Development Board.
+
 endmenu
 
 config CPU_PXA168
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 8b66d06739c4..751cdbf733c8 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
+obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 244655d323ea..06b5fa853c93 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -16,6 +16,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -23,6 +24,9 @@
 #include <mach/mfp-pxa168.h>
 #include <mach/pxa168.h>
 #include <mach/gpio.h>
+#include <video/pxa168fb.h>
+#include <linux/input.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "common.h"
 
@@ -66,6 +70,43 @@ static unsigned long common_pin_config[] __initdata = {
 	GPIO115_I2S_BCLK,
 	GPIO116_I2S_RXD,
 	GPIO117_I2S_TXD,
+
+	/* LCD */
+	GPIO56_LCD_FCLK_RD,
+	GPIO57_LCD_LCLK_A0,
+	GPIO58_LCD_PCLK_WR,
+	GPIO59_LCD_DENA_BIAS,
+	GPIO60_LCD_DD0,
+	GPIO61_LCD_DD1,
+	GPIO62_LCD_DD2,
+	GPIO63_LCD_DD3,
+	GPIO64_LCD_DD4,
+	GPIO65_LCD_DD5,
+	GPIO66_LCD_DD6,
+	GPIO67_LCD_DD7,
+	GPIO68_LCD_DD8,
+	GPIO69_LCD_DD9,
+	GPIO70_LCD_DD10,
+	GPIO71_LCD_DD11,
+	GPIO72_LCD_DD12,
+	GPIO73_LCD_DD13,
+	GPIO74_LCD_DD14,
+	GPIO75_LCD_DD15,
+	GPIO76_LCD_DD16,
+	GPIO77_LCD_DD17,
+	GPIO78_LCD_DD18,
+	GPIO79_LCD_DD19,
+	GPIO80_LCD_DD20,
+	GPIO81_LCD_DD21,
+	GPIO82_LCD_DD22,
+	GPIO83_LCD_DD23,
+
+	/* Keypad */
+	GPIO109_KP_MKIN1,
+	GPIO110_KP_MKIN0,
+	GPIO111_KP_MKOUT7,
+	GPIO112_KP_MKOUT6,
+	GPIO121_KP_MKIN4,
 };
 
 static struct smc91x_platdata smc91x_info = {
@@ -134,6 +175,51 @@ static struct i2c_board_info aspenite_i2c_info[] __initdata = {
 	{ I2C_BOARD_INFO("wm8753", 0x1b), },
 };
 
+static struct fb_videomode video_modes[] = {
+	[0] = {
+		.pixclock	= 30120,
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.hsync_len	= 1,
+		.left_margin	= 215,
+		.right_margin	= 40,
+		.vsync_len	= 1,
+		.upper_margin	= 34,
+		.lower_margin	= 10,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+	},
+};
+
+struct pxa168fb_mach_info aspenite_lcd_info = {
+	.id			= "Graphic Frame",
+	.modes			= video_modes,
+	.num_modes		= ARRAY_SIZE(video_modes),
+	.pix_fmt		= PIX_FMT_RGB565,
+	.io_pin_allocation_mode = PIN_MODE_DUMB_24,
+	.dumb_mode		= DUMB_MODE_RGB888,
+	.active			= 1,
+	.panel_rbswap		= 0,
+	.invert_pixclock	= 0,
+};
+
+static unsigned int aspenite_matrix_key_map[] = {
+	KEY(0, 6, KEY_UP),	/* SW 4 */
+	KEY(0, 7, KEY_DOWN),	/* SW 5 */
+	KEY(1, 6, KEY_LEFT),	/* SW 6 */
+	KEY(1, 7, KEY_RIGHT),	/* SW 7 */
+	KEY(4, 6, KEY_ENTER),	/* SW 8 */
+	KEY(4, 7, KEY_ESC),	/* SW 9 */
+};
+
+static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
+	.matrix_key_rows	= 5,
+	.matrix_key_cols	= 8,
+	.matrix_key_map		= aspenite_matrix_key_map,
+	.matrix_key_map_size	= ARRAY_SIZE(aspenite_matrix_key_map),
+	.debounce_interval	= 30,
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
@@ -143,26 +229,24 @@ static void __init common_init(void)
 	pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
 	pxa168_add_ssp(1);
 	pxa168_add_nand(&aspenite_nand_info);
+	pxa168_add_fb(&aspenite_lcd_info);
+	pxa168_add_keypad(&aspenite_keypad_info);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
 }
 
 MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
+	.nr_irqs	= IRQ_BOARD_START,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,
 MACHINE_END
 
 MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
+	.nr_irqs	= IRQ_BOARD_START,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = common_init,
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 8c3fa5d14f4b..39f0878d64a0 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -41,10 +41,7 @@ static void __init avengers_lite_init(void)
 }
 
 MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
 	.init_irq       = pxa168_init_irq,
 	.timer          = &pxa168_timer,
 	.init_machine   = avengers_lite_init,
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index e1e66c18b446..0ec0ca80bb3e 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -10,13 +10,20 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 
 #include <asm/page.h>
 #include <asm/mach/map.h>
 #include <mach/addr-map.h>
+#include <mach/cputype.h>
 
 #include "common.h"
 
+#define MMP_CHIPID	(AXI_VIRT_BASE + 0x82c00)
+
+unsigned int mmp_chip_id;
+EXPORT_SYMBOL(mmp_chip_id);
+
 static struct map_desc standard_io_desc[] __initdata = {
 	{
 		.pfn		= __phys_to_pfn(APB_PHYS_BASE),
@@ -31,7 +38,10 @@ static struct map_desc standard_io_desc[] __initdata = {
 	},
 };
 
-void __init pxa_map_io(void)
+void __init mmp_map_io(void)
 {
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+
+	/* this is early, initialize mmp_chip_id here */
+	mmp_chip_id = __raw_readl(MMP_CHIPID);
 }
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index b4a0ba05a0f4..ec8d65ded25c 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -3,15 +3,6 @@
 struct sys_timer;
 
 extern void timer_init(int irq);
-extern void mmp2_clear_pmic_int(void);
-
-extern struct sys_timer pxa168_timer;
-extern struct sys_timer pxa910_timer;
-extern struct sys_timer mmp2_timer;
-extern void __init pxa168_init_irq(void);
-extern void __init pxa910_init_irq(void);
-extern void __init mmp2_init_icu(void);
-extern void __init mmp2_init_irq(void);
 
 extern void __init icu_init_irq(void);
-extern void __init pxa_map_io(void);
+extern void __init mmp_map_io(void);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index 4ec7709a3462..bdeb6db4d49a 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -16,6 +16,7 @@
 #include <linux/smc91x.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -25,6 +26,8 @@
 
 #include "common.h"
 
+#define FLINT_NR_IRQS	(IRQ_BOARD_START + 48)
+
 static unsigned long flint_pin_config[] __initdata = {
 	/* UART1 */
 	GPIO45_UART1_RXD,
@@ -113,10 +116,8 @@ static void __init flint_init(void)
 }
 
 MACHINE_START(FLINT, "Flint Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
+	.nr_irqs	= FLINT_NR_IRQS,
 	.init_irq       = mmp2_init_irq,
 	.timer          = &mmp2_timer,
 	.init_machine   = flint_init,
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index 83b18721d933..f43a68b213f1 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -4,36 +4,51 @@
 #include <asm/cputype.h>
 
 /*
- *  CPU   Stepping   OLD_ID       CPU_ID      CHIP_ID
+ *  CPU   Stepping   CPU_ID      CHIP_ID
  *
- * PXA168    A0    0x41159263   0x56158400   0x00A0A333
- * PXA910    Y0    0x41159262   0x56158000   0x00F0C910
- * MMP2	     Z0			0x560f5811
+ * PXA168    S0    0x56158400   0x0000C910
+ * PXA168    A0    0x56158400   0x00A0A168
+ * PXA910    Y1    0x56158400   0x00F2C920
+ * PXA910    A0    0x56158400   0x00F2C910
+ * PXA910    A1    0x56158400   0x00A0C910
+ * PXA920    Y0    0x56158400   0x00F2C920
+ * PXA920    A0    0x56158400   0x00A0C920
+ * PXA920    A1    0x56158400   0x00A1C920
+ * MMP2	     Z0	   0x560f5811   0x00F00410
+ * MMP2      Z1    0x560f5811   0x00E00410
+ * MMP2      A0    0x560f5811   0x00A0A610
  */
 
+extern unsigned int mmp_chip_id;
+
 #ifdef CONFIG_CPU_PXA168
-#  define __cpu_is_pxa168(id)	\
-	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; })
+static inline int cpu_is_pxa168(void)
+{
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x84) &&
+		((mmp_chip_id & 0xfff) == 0x168);
+}
 #else
-#  define __cpu_is_pxa168(id)	(0)
+#define cpu_is_pxa168()	(0)
 #endif
 
+/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */
 #ifdef CONFIG_CPU_PXA910
-#  define __cpu_is_pxa910(id)	\
-	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x80; })
+static inline int cpu_is_pxa910(void)
+{
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x84) &&
+		(((mmp_chip_id & 0xfff) == 0x910) ||
+		 ((mmp_chip_id & 0xfff) == 0x920));
+}
 #else
-#  define __cpu_is_pxa910(id)	(0)
+#define cpu_is_pxa910()	(0)
 #endif
 
 #ifdef CONFIG_CPU_MMP2
-#  define __cpu_is_mmp2(id)	\
-	({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x58; })
+static inline int cpu_is_mmp2(void)
+{
+	return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
 #else
-#  define __cpu_is_mmp2(id)	(0)
+#define cpu_is_mmp2()	(0)
 #endif
 
-#define cpu_is_pxa168()		({ __cpu_is_pxa168(read_cpuid_id()); })
-#define cpu_is_pxa910()		({ __cpu_is_pxa910(read_cpuid_id()); })
-#define cpu_is_mmp2()		({ __cpu_is_mmp2(read_cpuid_id()); })
-
 #endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index 76deff238e1c..7e2ebd3efc7c 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,12 +11,11 @@
 
 #include <mach/addr-map.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1				@ MMU enabled?
-		ldreq	\rx, =APB_PHYS_BASE		@ physical
-		ldrne	\rx, =APB_VIRT_BASE		@ virtual
-		orr	\rx, \rx, #0x00017000
+		.macro	addruart, rp, rv
+		ldr	\rp, =APB_PHYS_BASE		@ physical
+		ldr	\rv, =APB_VIRT_BASE		@ virtual
+		orr	\rp, \rp, #0x00017000
+		orr	\rv, \rv, #0x00017000
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
index 1fa0a492454a..d0ec7dae88e4 100644
--- a/arch/arm/mach-mmp/include/mach/devices.h
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -1,3 +1,6 @@
+#ifndef __MACH_DEVICE_H
+#define __MACH_DEVICE_H
+
 #include <linux/types.h>
 
 #define MAX_RESOURCE_DMA	2
@@ -47,3 +50,4 @@ struct pxa_device_desc mmp2_device_##_name __initdata = {		\
 }
 
 extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
+#endif /* __MACH_DEVICE_H */
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index b379cdec4d38..a09d328e2ddd 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -222,10 +222,8 @@
 #define IRQ_GPIO_NUM			192
 #define IRQ_GPIO(x)			(IRQ_GPIO_START + (x))
 
-/* Board IRQ - 64 by default, increase if not enough */
 #define IRQ_BOARD_START			(IRQ_GPIO_START + IRQ_GPIO_NUM)
-#define IRQ_BOARD_END			(IRQ_BOARD_START + 64)
 
-#define NR_IRQS				(IRQ_BOARD_END)
+#define NR_IRQS				(IRQ_BOARD_START)
 
 #endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index ded43c455ec3..4621067c7720 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -289,4 +289,11 @@
 #define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
 #define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
 
+/* Keypad */
+#define GPIO109_KP_MKIN1        MFP_CFG(GPIO109, AF7)
+#define GPIO110_KP_MKIN0        MFP_CFG(GPIO110, AF7)
+#define GPIO111_KP_MKOUT7       MFP_CFG(GPIO111, AF7)
+#define GPIO112_KP_MKOUT6       MFP_CFG(GPIO112, AF7)
+#define GPIO121_KP_MKIN4        MFP_CFG(GPIO121, AF7)
+
 #endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index fec220bd5046..dbba6e8a60c4 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -1,6 +1,13 @@
 #ifndef __ASM_MACH_MMP2_H
 #define __ASM_MACH_MMP2_H
 
+struct sys_timer;
+
+extern struct sys_timer mmp2_timer;
+extern void __init mmp2_init_icu(void);
+extern void __init mmp2_init_irq(void);
+extern void mmp2_clear_pmic_int(void);
+
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 3b2bd5d5eb05..1801e4206232 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -1,10 +1,19 @@
 #ifndef __ASM_MACH_PXA168_H
 #define __ASM_MACH_PXA168_H
 
+struct sys_timer;
+
+extern struct sys_timer pxa168_timer;
+extern void __init pxa168_init_irq(void);
+extern void pxa168_clear_keypad_wakeup(void);
+
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
+#include <video/pxa168fb.h>
+#include <plat/pxa27x_keypad.h>
+#include <mach/cputype.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -20,6 +29,8 @@ extern struct pxa_device_desc pxa168_device_ssp3;
 extern struct pxa_device_desc pxa168_device_ssp4;
 extern struct pxa_device_desc pxa168_device_ssp5;
 extern struct pxa_device_desc pxa168_device_nand;
+extern struct pxa_device_desc pxa168_device_fb;
+extern struct pxa_device_desc pxa168_device_keypad;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -92,4 +103,18 @@ static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
 {
 	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
 }
+
+static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
+{
+	return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
+}
+
+static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
+{
+	if (cpu_is_pxa168())
+		data->clear_wakeup_event = pxa168_clear_keypad_wakeup;
+
+	return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
+}
+
 #endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 4f0b4ec6f5d0..f13c49d6f8dc 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -1,6 +1,11 @@
 #ifndef __ASM_MACH_PXA910_H
 #define __ASM_MACH_PXA910_H
 
+struct sys_timer;
+
+extern struct sys_timer pxa910_timer;
+extern void __init pxa910_init_irq(void);
+
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index 919030514120..ac4702357a6e 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -33,4 +33,16 @@
 #define APMU_FNRST_DIS	(1 << 1)
 #define APMU_AXIRST_DIS	(1 << 0)
 
+/* Wake Clear Register */
+#define APMU_WAKE_CLR	APMU_REG(0x07c)
+
+#define APMU_PXA168_KP_WAKE_CLR		(1 << 7)
+#define APMU_PXA168_CFI_WAKE_CLR	(1 << 6)
+#define APMU_PXA168_XD_WAKE_CLR		(1 << 5)
+#define APMU_PXA168_MSP_WAKE_CLR	(1 << 4)
+#define APMU_PXA168_SD4_WAKE_CLR	(1 << 3)
+#define APMU_PXA168_SD3_WAKE_CLR	(1 << 2)
+#define APMU_PXA168_SD2_WAKE_CLR	(1 << 1)
+#define APMU_PXA168_SD1_WAKE_CLR	(1 << 0)
+
 #endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
index 4f5b0e0ce6cf..1a8a25edb1b4 100644
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -9,6 +9,8 @@
 #ifndef __ASM_MACH_SYSTEM_H
 #define __ASM_MACH_SYSTEM_H
 
+#include <mach/cputype.h>
+
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
@@ -16,6 +18,9 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	cpu_reset(0);
+	if (cpu_is_pxa168())
+		cpu_reset(0xffff0000);
+	else
+		cpu_reset(0);
 }
 #endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-mmp/include/mach/teton_bga.h b/arch/arm/mach-mmp/include/mach/teton_bga.h
new file mode 100644
index 000000000000..61a539b2cc98
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/teton_bga.h
@@ -0,0 +1,27 @@
+/*
+ *  linux/arch/arm/mach-mmp/include/mach/teton_bga.h
+ *
+ *  Support for the Marvell PXA168 Teton BGA Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+#ifndef __ASM_MACH_TETON_BGA_H
+#define __ASM_MACH_TETON_BGA_H
+
+/* GPIOs */
+#define MMC_PWENA_GPIO		27
+#define USBHPENB_GPIO		55
+#define RTC_INT_GPIO		78
+#define LCD_VBLK_EN_GPIO	79
+#define LCD_DVDD_EN_GPIO	80
+#define RST_WIFI_GPIO		81
+#define CF_PWEN_GPIO		82
+#define USB_OC_GPIO		83
+#define PWM_GPIO		84
+#define USBHPENA_GPIO		85
+#define TS_INT_GPIO		86
+#define CIR_GPIO		108
+
+#endif /* __ASM_MACH_TETON_BGA_H */
diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c
index cb18221c0af3..01342be91c3c 100644
--- a/arch/arm/mach-mmp/irq-mmp2.c
+++ b/arch/arm/mach-mmp/irq-mmp2.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 
 #include <mach/regs-icu.h>
+#include <mach/mmp2.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index d77dd41d60e1..2a684fa50773 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -18,16 +18,18 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max8649.h>
 #include <linux/mfd/max8925.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-mmp2.h>
 #include <mach/mmp2.h>
-#include <mach/irqs.h>
 
 #include "common.h"
 
+#define JASPER_NR_IRQS		(IRQ_BOARD_START + 48)
+
 static unsigned long jasper_pin_config[] __initdata = {
 	/* UART1 */
 	GPIO29_UART1_RXD,
@@ -134,10 +136,8 @@ static void __init jasper_init(void)
 }
 
 MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
+	.nr_irqs	= JASPER_NR_IRQS,
 	.init_irq       = mmp2_init_irq,
 	.timer          = &mmp2_timer,
 	.init_machine   = jasper_init,
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 7f5eb059bb01..daf3993349f8 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -17,6 +17,7 @@
 
 #include <asm/hardware/cache-tauros2.h>
 
+#include <asm/mach/time.h>
 #include <mach/addr-map.h>
 #include <mach/regs-apbc.h>
 #include <mach/regs-apmu.h>
@@ -26,6 +27,7 @@
 #include <mach/mfp.h>
 #include <mach/gpio.h>
 #include <mach/devices.h>
+#include <mach/mmp2.h>
 
 #include "common.h"
 #include "clock.h"
@@ -158,6 +160,26 @@ static int __init mmp2_init(void)
 }
 postcore_initcall(mmp2_init);
 
+static void __init mmp2_timer_init(void)
+{
+	unsigned long clk_rst;
+
+	__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+
+	/*
+	 * enable bus/functional clock, enable 6.5MHz (divider 4),
+	 * release reset
+	 */
+	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
+	__raw_writel(clk_rst, APBC_MMP2_TIMERS);
+
+	timer_init(IRQ_MMP2_TIMER1);
+}
+
+struct sys_timer mmp2_timer = {
+	.init	= mmp2_timer_init,
+};
+
 /* on-chip devices */
 MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
 MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 652ae660634c..72b4e7631583 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -77,8 +77,10 @@ static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
 static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
 static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
+static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 
 static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(lcd, LCD, 0x7f, 312000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
@@ -96,6 +98,8 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
 	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -132,6 +136,16 @@ struct sys_timer pxa168_timer = {
 	.init	= pxa168_timer_init,
 };
 
+void pxa168_clear_keypad_wakeup(void)
+{
+	uint32_t val;
+	uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
+
+	/* wake event clear is needed in order to clear keypad interrupt */
+	val = __raw_readl(APMU_WAKE_CLR);
+	__raw_writel(val |  mask, APMU_WAKE_CLR);
+}
+
 /* on-chip devices */
 PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
 PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
@@ -147,3 +161,5 @@ PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
 PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
 PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
 PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
+PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
+PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index 0e0c9220eaba..c296b75c4453 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -99,10 +99,7 @@ static void __init tavorevb_init(void)
 }
 
 MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
-	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
 	.init_irq       = pxa910_init_irq,
 	.timer          = &pxa910_timer,
 	.init_machine   = tavorevb_init,
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
new file mode 100644
index 000000000000..bbe4727b96cc
--- /dev/null
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -0,0 +1,89 @@
+/*
+ *  linux/arch/arm/mach-mmp/teton_bga.c
+ *
+ *  Support for the Marvell PXA168 Teton BGA Development Platform.
+ *
+ *  Author: Mark F. Brown <mark.brown314@gmail.com>
+ *
+ *  This code is based on aspenite.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <plat/pxa27x_keypad.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/teton_bga.h>
+
+#include "common.h"
+
+static unsigned long teton_bga_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO107_UART1_TXD,
+	GPIO108_UART1_RXD,
+
+	/* Keypad */
+	GPIO109_KP_MKIN1,
+	GPIO110_KP_MKIN0,
+	GPIO111_KP_MKOUT7,
+	GPIO112_KP_MKOUT6,
+
+	/* I2C Bus */
+	GPIO105_CI2C_SDA,
+	GPIO106_CI2C_SCL,
+
+	/* RTC */
+	GPIO78_GPIO,
+};
+
+static unsigned int teton_bga_matrix_key_map[] = {
+	KEY(0, 6, KEY_ESC),
+	KEY(0, 7, KEY_ENTER),
+	KEY(1, 6, KEY_LEFT),
+	KEY(1, 7, KEY_RIGHT),
+};
+
+static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
+	.matrix_key_rows        = 2,
+	.matrix_key_cols        = 8,
+	.matrix_key_map         = teton_bga_matrix_key_map,
+	.matrix_key_map_size    = ARRAY_SIZE(teton_bga_matrix_key_map),
+	.debounce_interval      = 30,
+};
+
+static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+		.irq = gpio_to_irq(RTC_INT_GPIO)
+	},
+};
+
+static void __init teton_bga_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
+
+	/* on-chip devices */
+	pxa168_add_uart(1);
+	pxa168_add_keypad(&teton_bga_keypad_info);
+	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
+}
+
+MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
+	.map_io		= mmp_map_io,
+	.nr_irqs	= IRQ_BOARD_START,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = teton_bga_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index cf75694e9687..66528193f939 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -200,24 +200,3 @@ void __init timer_init(int irq)
 	clocksource_register(&cksrc);
 	clockevents_register_device(&ckevt);
 }
-
-static void __init mmp2_timer_init(void)
-{
-	unsigned long clk_rst;
-
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
-
-	/*
-	 * enable bus/functional clock, enable 6.5MHz (divider 4),
-	 * release reset
-	 */
-	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
-	__raw_writel(clk_rst, APBC_MMP2_TIMERS);
-
-	timer_init(IRQ_MMP2_TIMER1);
-}
-
-struct sys_timer mmp2_timer = {
-	.init	= mmp2_timer_init,
-};
-
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index b22dec4abf78..e411039ea59e 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -14,6 +14,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/onenand.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -24,6 +25,8 @@
 
 #include "common.h"
 
+#define TTCDKB_NR_IRQS		(IRQ_BOARD_START + 24)
+
 static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
 	GPIO47_UART2_RXD,
@@ -122,10 +125,8 @@ static void __init ttc_dkb_init(void)
 }
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
-	.phys_io        = APB_PHYS_BASE,
-	.boot_params    = 0x00000100,
-	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
+	.map_io		= mmp_map_io,
+	.nr_irqs	= TTCDKB_NR_IRQS,
 	.init_irq       = pxa910_init_irq,
 	.timer          = &pxa910_timer,
 	.init_machine   = ttc_dkb_init,
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 47264a76eeb3..dbbcfeb919db 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -6,26 +6,45 @@ choice
 
 config ARCH_MSM7X00A
 	bool "MSM7x00A / MSM7x01A"
+	select MACH_TROUT if !MACH_HALIBUT
 	select ARCH_MSM_ARM11
 	select MSM_SMD
 	select MSM_SMD_PKG3
 	select CPU_V6
+	select MSM_PROC_COMM
+	select HAS_MSM_DEBUG_UART_PHYS
 
 config ARCH_MSM7X30
 	bool "MSM7x30"
+	select MACH_MSM7X30_SURF # if !
 	select ARCH_MSM_SCORPION
 	select MSM_SMD
 	select MSM_VIC
 	select CPU_V7
-	select MSM_REMOTE_SPINLOCK_DEKKERS
+	select MSM_GPIOMUX
+	select MSM_PROC_COMM
+	select HAS_MSM_DEBUG_UART_PHYS
 
 config ARCH_QSD8X50
 	bool "QSD8X50"
+	select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
 	select ARCH_MSM_SCORPION
 	select MSM_SMD
 	select MSM_VIC
 	select CPU_V7
-	select MSM_REMOTE_SPINLOCK_LDREX
+	select MSM_GPIOMUX
+	select MSM_PROC_COMM
+	select HAS_MSM_DEBUG_UART_PHYS
+
+config ARCH_MSM8X60
+	bool "MSM8X60"
+	select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \
+				  && !MACH_MSM8X60_FFA)
+	select ARM_GIC
+	select CPU_V7
+	select MSM_V2_TLMM
+	select MSM_GPIOMUX
+
 endchoice
 
 config MSM_SOC_REV_A
@@ -36,6 +55,9 @@ config  ARCH_MSM_ARM11
 config  ARCH_MSM_SCORPION
 	bool
 
+config HAS_MSM_DEBUG_UART_PHYS
+	bool
+
 config  MSM_VIC
 	bool
 
@@ -74,6 +96,30 @@ config MACH_QSD8X50A_ST1_5
 	help
 	  Support for the Qualcomm ST1.5.
 
+config MACH_MSM8X60_RUMI3
+	depends on ARCH_MSM8X60
+	bool "MSM8x60 RUMI3"
+	help
+	  Support for the Qualcomm MSM8x60 RUMI3 emulator.
+
+config MACH_MSM8X60_SURF
+	depends on ARCH_MSM8X60
+	bool "MSM8x60 SURF"
+	help
+	  Support for the Qualcomm MSM8x60 SURF eval board.
+
+config MACH_MSM8X60_SIM
+	depends on ARCH_MSM8X60
+	bool "MSM8x60 Simulator"
+	help
+	  Support for the Qualcomm MSM8x60 simulator.
+
+config MACH_MSM8X60_FFA
+	depends on ARCH_MSM8X60
+	bool "MSM8x60 FFA"
+	help
+	  Support for the Qualcomm MSM8x60 FFA eval board.
+
 endmenu
 
 config MSM_DEBUG_UART
@@ -82,6 +128,7 @@ config MSM_DEBUG_UART
 	default 2 if MSM_DEBUG_UART2
 	default 3 if MSM_DEBUG_UART3
 
+if HAS_MSM_DEBUG_UART_PHYS
 choice
 	prompt "Debug UART"
 
@@ -99,11 +146,20 @@ choice
 	config MSM_DEBUG_UART3
 		bool "UART3"
 endchoice
+endif
 
 config MSM_SMD_PKG3
 	bool
 
+config MSM_PROC_COMM
+	bool
+
 config MSM_SMD
 	bool
 
+config MSM_GPIOMUX
+	bool
+
+config MSM_V2_TLMM
+	bool
 endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 66677f0acaed..b5a7b07a44f5 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,22 +1,33 @@
-obj-y += proc_comm.o
-obj-y += io.o idle.o timer.o dma.o
-obj-y += vreg.o
+obj-y += io.o idle.o timer.o
+ifndef CONFIG_ARCH_MSM8X60
 obj-y += acpuclock-arm11.o
-obj-y += clock.o clock-pcom.o
-obj-y += gpio.o
+obj-y += dma.o
+endif
 
 ifdef CONFIG_MSM_VIC
 obj-y += irq-vic.o
 else
+ifndef CONFIG_ARCH_MSM8X60
 obj-y += irq.o
 endif
+endif
 
+obj-$(CONFIG_ARCH_MSM8X60) += clock-dummy.o iommu.o iommu_dev.o devices-msm8x60-iommu.o
+obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
+obj-$(CONFIG_MSM_PROC_COMM) += clock.o
 obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
 obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 
-obj-$(CONFIG_MACH_TROUT) += board-trout.o devices-msm7x00.o
+obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
+obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
 
+obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o
+obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
+obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o
+ifndef CONFIG_MSM_V2_TLMM
+obj-y	+= gpio.o
+endif
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c
index af5e85b91d02..7ffbd987eb5d 100644
--- a/arch/arm/mach-msm/acpuclock-arm11.c
+++ b/arch/arm/mach-msm/acpuclock-arm11.c
@@ -17,7 +17,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/list.h>
@@ -98,7 +97,7 @@ struct clkctl_acpu_speed {
 
 /*
  * ACPU speed table. Complete table is shown but certain speeds are commented
- * out to optimized speed switching. Initalize loops_per_jiffy to 0.
+ * out to optimized speed switching. Initialize loops_per_jiffy to 0.
  *
  * Table stepping up/down is optimized for 256mhz jumps while staying on the
  * same PLL.
@@ -494,7 +493,7 @@ uint32_t acpuclk_get_switch_time(void)
  * Clock driver initialization
  *---------------------------------------------------------------------------*/
 
-/* Initalize the lpj field in the acpu_freq_tbl. */
+/* Initialize the lpj field in the acpu_freq_tbl. */
 static void __init lpj_init(void)
 {
 	int i;
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 7bd72e8f127e..75dabb16c802 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -83,7 +83,6 @@ static void __init halibut_fixup(struct machine_desc *desc, struct tag *tags,
 {
 	mi->nr_banks=1;
 	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
 	mi->bank[0].size = (101*1024*1024);
 }
 
@@ -95,8 +94,6 @@ static void __init halibut_map_io(void)
 
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= 0x10000100,
 	.fixup		= halibut_fixup,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index bcbefdfe7b5e..ef3ebf2f763b 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -75,8 +75,6 @@ extern struct sys_timer msm_timer;
 
 MACHINE_START(MAHIMAHI, "mahimahi")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= 0x20000100,
 	.fixup		= mahimahi_fixup,
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index db9381b85bf0..e7a76eff57d9 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -131,8 +131,6 @@ static void __init msm7x2x_map_io(void)
 
 MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
@@ -143,8 +141,6 @@ MACHINE_END
 
 MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
@@ -155,8 +151,6 @@ MACHINE_END
 
 MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
@@ -167,8 +161,6 @@ MACHINE_END
 
 MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= msm7x2x_map_io,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index e32981928c77..05241df3f9b6 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -39,27 +39,11 @@
 
 extern struct sys_timer msm_timer;
 
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
-static struct msm_gpio uart2_config_data[] = {
-	{ GPIO_CFG(49, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_RFR"},
-	{ GPIO_CFG(50, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_CTS"},
-	{ GPIO_CFG(51, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
-	{ GPIO_CFG(52, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
-};
-
-static void msm7x30_init_uart2(void)
-{
-	msm_gpios_request_enable(uart2_config_data,
-			ARRAY_SIZE(uart2_config_data));
-
-}
-#endif
-
 static struct platform_device *devices[] __initdata = {
 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
         &msm_device_uart2,
 #endif
-
+	&msm_device_smd,
 };
 
 static void __init msm7x30_init_irq(void)
@@ -70,10 +54,6 @@ static void __init msm7x30_init_irq(void)
 static void __init msm7x30_init(void)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
-	msm7x30_init_uart2();
-#endif
-
 }
 
 static void __init msm7x30_map_io(void)
@@ -84,8 +64,6 @@ static void __init msm7x30_map_io(void)
 
 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io  = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = msm7x30_map_io,
@@ -96,8 +74,6 @@ MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io  = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = msm7x30_map_io,
@@ -108,8 +84,6 @@ MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io  = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = msm7x30_map_io,
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
new file mode 100644
index 000000000000..7486a681cc71
--- /dev/null
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -0,0 +1,100 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
+
+void __iomem *gic_cpu_base_addr;
+
+unsigned long clk_get_max_axi_khz(void)
+{
+	return 0;
+}
+
+static void __init msm8x60_map_io(void)
+{
+	msm_map_msm8x60_io();
+}
+
+static void __init msm8x60_init_irq(void)
+{
+	unsigned int i;
+
+	gic_dist_init(0, MSM_QGIC_DIST_BASE, GIC_PPI_START);
+	gic_cpu_base_addr = (void *)MSM_QGIC_CPU_BASE;
+	gic_cpu_init(0, MSM_QGIC_CPU_BASE);
+
+	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
+	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
+
+	/* RUMI does not adhere to GIC spec by enabling STIs by default.
+	 * Enable/clear is supposed to be RO for STIs, but is RW on RUMI.
+	 */
+	if (!machine_is_msm8x60_sim())
+		writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
+
+	/* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
+	 * as they are configured as level, which does not play nice with
+	 * handle_percpu_irq.
+	 */
+	for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
+		if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
+			set_irq_handler(i, handle_percpu_irq);
+	}
+}
+
+static void __init msm8x60_init(void)
+{
+}
+
+MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
+	.map_io = msm8x60_map_io,
+	.init_irq = msm8x60_init_irq,
+	.init_machine = msm8x60_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
+	.map_io = msm8x60_map_io,
+	.init_irq = msm8x60_init_irq,
+	.init_machine = msm8x60_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
+	.map_io = msm8x60_map_io,
+	.init_irq = msm8x60_init_irq,
+	.init_machine = msm8x60_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
+	.map_io = msm8x60_map_io,
+	.init_irq = msm8x60_init_irq,
+	.init_machine = msm8x60_init,
+	.timer = &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index e3cc80792d6c..ed2af4ad97ed 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -35,20 +35,49 @@
 
 extern struct sys_timer msm_timer;
 
-static struct msm_gpio uart3_config_data[] = {
-	{ GPIO_CFG(86, 1, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
-	{ GPIO_CFG(87, 1, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
+static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300;
+static const unsigned        qsd8x50_surf_smc91x_gpio __initdata = 156;
+
+/* Leave smc91x resources empty here, as we'll fill them in
+ * at run-time: they vary from board to board, and the true
+ * configuration won't be known until boot.
+ */
+static struct resource smc91x_resources[] __initdata = {
+	[0] = {
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
-static struct platform_device *devices[] __initdata = {
-	&msm_device_uart3,
+static struct platform_device smc91x_device __initdata = {
+	.name           = "smc91x",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(smc91x_resources),
+	.resource       = smc91x_resources,
 };
 
-static void msm8x50_init_uart3(void)
+static int __init msm_init_smc91x(void)
 {
-	msm_gpios_request_enable(uart3_config_data,
-				ARRAY_SIZE(uart3_config_data));
+	if (machine_is_qsd8x50_surf()) {
+		smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
+		smc91x_resources[0].end   = qsd8x50_surf_smc91x_base + 0xff;
+		smc91x_resources[1].start =
+			gpio_to_irq(qsd8x50_surf_smc91x_gpio);
+		smc91x_resources[1].end   =
+			gpio_to_irq(qsd8x50_surf_smc91x_gpio);
+		platform_device_register(&smc91x_device);
+	}
+
+	return 0;
 }
+module_init(msm_init_smc91x);
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+	&msm_device_smd,
+};
 
 static void __init qsd8x50_map_io(void)
 {
@@ -64,14 +93,11 @@ static void __init qsd8x50_init_irq(void)
 
 static void __init qsd8x50_init(void)
 {
-	msm8x50_init_uart3();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io  = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = qsd8x50_map_io,
@@ -82,8 +108,6 @@ MACHINE_END
 
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io  = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params = PHYS_OFFSET + 0x100,
 	.map_io = qsd8x50_map_io,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 2bc1b9d5623e..8919ffb17196 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -106,8 +106,6 @@ static void __init sapphire_map_io(void)
 MACHINE_START(SAPPHIRE, "sapphire")
 /* Maintainer: Brian Swetland <swetland@google.com> */
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io        = MSM_DEBUG_UART_PHYS,
-	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.fixup          = sapphire_fixup,
diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c
new file mode 100644
index 000000000000..c50f3afc3134
--- /dev/null
+++ b/arch/arm/mach-msm/board-trout-gpio.c
@@ -0,0 +1,227 @@
+/*
+ * linux/arch/arm/mach-msm/gpio.c
+ *
+ * Copyright (C) 2005 HP Labs
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include "board-trout.h"
+
+static uint8_t trout_int_mask[2] = {
+	[0] = 0xff, /* mask all interrupts */
+	[1] = 0xff,
+};
+static uint8_t trout_sleep_int_mask[] = {
+	[0] = 0xff,
+	[1] = 0xff,
+};
+
+struct msm_gpio_chip {
+	struct gpio_chip	chip;
+	void __iomem		*reg;	/* Base of register bank */
+	u8			shadow;
+};
+
+#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip)
+
+static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+	unsigned mask = 1 << offset;
+
+	return !!(readb(msm_gpio->reg) & mask);
+}
+
+static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+	unsigned mask = 1 << offset;
+
+	if (val)
+		msm_gpio->shadow |= mask;
+	else
+		msm_gpio->shadow &= ~mask;
+
+	writeb(msm_gpio->shadow, msm_gpio->reg);
+}
+
+static int msm_gpiolib_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	msm_gpiolib_set(chip, offset, 0);
+	return 0;
+}
+
+static int msm_gpiolib_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int val)
+{
+	msm_gpiolib_set(chip, offset, val);
+	return 0;
+}
+
+#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val)		\
+	{								\
+		.chip = {						\
+			.label		  = name,			\
+			.direction_input  = msm_gpiolib_direction_input,\
+			.direction_output = msm_gpiolib_direction_output, \
+			.get		  = msm_gpiolib_get,		\
+			.set		  = msm_gpiolib_set,		\
+			.base		  = base_gpio,			\
+			.ngpio		  = 8,				\
+		},							\
+		.reg = (void *) reg_num + TROUT_CPLD_BASE,		\
+		.shadow = shadow_val,					\
+	}
+
+static struct msm_gpio_chip msm_gpio_banks[] = {
+#if defined(CONFIG_MSM_DEBUG_UART1)
+	/* H2W pins <-> UART1 */
+	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x40),
+#else
+	/* H2W pins <-> UART3, Bluetooth <-> UART1 */
+	TROUT_GPIO_BANK("MISC2", 0x00,   TROUT_GPIO_MISC2_BASE, 0x80),
+#endif
+	/* I2C pull */
+	TROUT_GPIO_BANK("MISC3", 0x02,   TROUT_GPIO_MISC3_BASE, 0x04),
+	TROUT_GPIO_BANK("MISC4", 0x04,   TROUT_GPIO_MISC4_BASE, 0),
+	/* mmdi 32k en */
+	TROUT_GPIO_BANK("MISC5", 0x06,   TROUT_GPIO_MISC5_BASE, 0x04),
+	TROUT_GPIO_BANK("INT2", 0x08,    TROUT_GPIO_INT2_BASE,  0),
+	TROUT_GPIO_BANK("MISC1", 0x0a,   TROUT_GPIO_MISC1_BASE, 0),
+	TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0),
+};
+
+static void trout_gpio_irq_ack(unsigned int irq)
+{
+	int bank = TROUT_INT_TO_BANK(irq);
+	uint8_t mask = TROUT_INT_TO_MASK(irq);
+	int reg = TROUT_BANK_TO_STAT_REG(bank);
+	/*printk(KERN_INFO "trout_gpio_irq_ack irq %d\n", irq);*/
+	writeb(mask, TROUT_CPLD_BASE + reg);
+}
+
+static void trout_gpio_irq_mask(unsigned int irq)
+{
+	unsigned long flags;
+	uint8_t reg_val;
+	int bank = TROUT_INT_TO_BANK(irq);
+	uint8_t mask = TROUT_INT_TO_MASK(irq);
+	int reg = TROUT_BANK_TO_MASK_REG(bank);
+
+	local_irq_save(flags);
+	reg_val = trout_int_mask[bank] |= mask;
+	/*printk(KERN_INFO "trout_gpio_irq_mask irq %d => %d:%02x\n",
+	       irq, bank, reg_val);*/
+	writeb(reg_val, TROUT_CPLD_BASE + reg);
+	local_irq_restore(flags);
+}
+
+static void trout_gpio_irq_unmask(unsigned int irq)
+{
+	unsigned long flags;
+	uint8_t reg_val;
+	int bank = TROUT_INT_TO_BANK(irq);
+	uint8_t mask = TROUT_INT_TO_MASK(irq);
+	int reg = TROUT_BANK_TO_MASK_REG(bank);
+
+	local_irq_save(flags);
+	reg_val = trout_int_mask[bank] &= ~mask;
+	/*printk(KERN_INFO "trout_gpio_irq_unmask irq %d => %d:%02x\n",
+	       irq, bank, reg_val);*/
+	writeb(reg_val, TROUT_CPLD_BASE + reg);
+	local_irq_restore(flags);
+}
+
+int trout_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	unsigned long flags;
+	int bank = TROUT_INT_TO_BANK(irq);
+	uint8_t mask = TROUT_INT_TO_MASK(irq);
+
+	local_irq_save(flags);
+	if(on)
+		trout_sleep_int_mask[bank] &= ~mask;
+	else
+		trout_sleep_int_mask[bank] |= mask;
+	local_irq_restore(flags);
+	return 0;
+}
+
+static void trout_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int j, m;
+	unsigned v;
+	int bank;
+	int stat_reg;
+	int int_base = TROUT_INT_START;
+	uint8_t int_mask;
+
+	for (bank = 0; bank < 2; bank++) {
+		stat_reg = TROUT_BANK_TO_STAT_REG(bank);
+		v = readb(TROUT_CPLD_BASE + stat_reg);
+		int_mask = trout_int_mask[bank];
+		if (v & int_mask) {
+			writeb(v & int_mask, TROUT_CPLD_BASE + stat_reg);
+			printk(KERN_ERR "trout_gpio_irq_handler: got masked "
+			       "interrupt: %d:%02x\n", bank, v & int_mask);
+		}
+		v &= ~int_mask;
+		while (v) {
+			m = v & -v;
+			j = fls(m) - 1;
+			/*printk(KERN_INFO "msm_gpio_irq_handler %d:%02x %02x b"
+			       "it %d irq %d\n", bank, v, m, j, int_base + j);*/
+			v &= ~m;
+			generic_handle_irq(int_base + j);
+		}
+		int_base += TROUT_INT_BANK0_COUNT;
+	}
+	desc->chip->ack(irq);
+}
+
+static struct irq_chip trout_gpio_irq_chip = {
+	.name      = "troutgpio",
+	.ack       = trout_gpio_irq_ack,
+	.mask      = trout_gpio_irq_mask,
+	.unmask    = trout_gpio_irq_unmask,
+	.set_wake  = trout_gpio_irq_set_wake,
+};
+
+/*
+ * Called from the processor-specific init to enable GPIO pin support.
+ */
+int __init trout_init_gpio(void)
+{
+	int i;
+	for(i = TROUT_INT_START; i <= TROUT_INT_END; i++) {
+		set_irq_chip(i, &trout_gpio_irq_chip);
+		set_irq_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
+		gpiochip_add(&msm_gpio_banks[i].chip);
+
+	set_irq_type(MSM_GPIO_TO_INT(17), IRQF_TRIGGER_HIGH);
+	set_irq_chained_handler(MSM_GPIO_TO_INT(17), trout_gpio_irq_handler);
+	set_irq_wake(MSM_GPIO_TO_INT(17), 1);
+
+	return 0;
+}
+
+postcore_initcall(trout_init_gpio);
+
diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c
new file mode 100644
index 000000000000..44be8464657b
--- /dev/null
+++ b/arch/arm/mach-msm/board-trout-mmc.c
@@ -0,0 +1,186 @@
+/* linux/arch/arm/mach-msm/board-trout-mmc.c
+** Author: Brian Swetland <swetland@google.com>
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#include <mach/vreg.h>
+
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+#include "board-trout.h"
+
+#include "proc_comm.h"
+
+#define DEBUG_SDSLOT_VDD 1
+
+/* ---- COMMON ---- */
+static void config_gpio_table(uint32_t *table, int len)
+{
+	int n;
+	unsigned id;
+	for(n = 0; n < len; n++) {
+		id = table[n];
+		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &id, 0);
+	}
+}
+
+/* ---- SDCARD ---- */
+
+static uint32_t sdcard_on_gpio_table[] = {
+	PCOM_GPIO_CFG(62, 2, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA), /* CLK */
+	PCOM_GPIO_CFG(63, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* CMD */
+	PCOM_GPIO_CFG(64, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT3 */
+	PCOM_GPIO_CFG(65, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT2 */
+	PCOM_GPIO_CFG(66, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT1 */
+	PCOM_GPIO_CFG(67, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT0 */
+};
+
+static uint32_t sdcard_off_gpio_table[] = {
+	PCOM_GPIO_CFG(62, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CLK */
+	PCOM_GPIO_CFG(63, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CMD */
+	PCOM_GPIO_CFG(64, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT3 */
+	PCOM_GPIO_CFG(65, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT2 */
+	PCOM_GPIO_CFG(66, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT1 */
+	PCOM_GPIO_CFG(67, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT0 */
+};
+
+static uint opt_disable_sdcard;
+
+static int __init trout_disablesdcard_setup(char *str)
+{
+	int cal = simple_strtol(str, NULL, 0);
+	
+	opt_disable_sdcard = cal;
+	return 1;
+}
+
+__setup("board_trout.disable_sdcard=", trout_disablesdcard_setup);
+
+static struct vreg *vreg_sdslot;	/* SD slot power */
+
+struct mmc_vdd_xlat {
+	int mask;
+	int level;
+};
+
+static struct mmc_vdd_xlat mmc_vdd_table[] = {
+	{ MMC_VDD_165_195,	1800 },
+	{ MMC_VDD_20_21,	2050 },
+	{ MMC_VDD_21_22,	2150 },
+	{ MMC_VDD_22_23,	2250 },
+	{ MMC_VDD_23_24,	2350 },
+	{ MMC_VDD_24_25,	2450 },
+	{ MMC_VDD_25_26,	2550 },
+	{ MMC_VDD_26_27,	2650 },
+	{ MMC_VDD_27_28,	2750 },
+	{ MMC_VDD_28_29,	2850 },
+	{ MMC_VDD_29_30,	2950 },
+};
+
+static unsigned int sdslot_vdd = 0xffffffff;
+static unsigned int sdslot_vreg_enabled;
+
+static uint32_t trout_sdslot_switchvdd(struct device *dev, unsigned int vdd)
+{
+	int i, rc;
+
+	BUG_ON(!vreg_sdslot);
+
+	if (vdd == sdslot_vdd)
+		return 0;
+
+	sdslot_vdd = vdd;
+
+	if (vdd == 0) {
+#if DEBUG_SDSLOT_VDD
+		printk("%s: Disabling SD slot power\n", __func__);
+#endif
+		config_gpio_table(sdcard_off_gpio_table,
+				  ARRAY_SIZE(sdcard_off_gpio_table));
+		vreg_disable(vreg_sdslot);
+		sdslot_vreg_enabled = 0;
+		return 0;
+	}
+
+	if (!sdslot_vreg_enabled) {
+		rc = vreg_enable(vreg_sdslot);
+		if (rc) {
+			printk(KERN_ERR "%s: Error enabling vreg (%d)\n",
+			       __func__, rc);
+		}
+		config_gpio_table(sdcard_on_gpio_table,
+				  ARRAY_SIZE(sdcard_on_gpio_table));
+		sdslot_vreg_enabled = 1;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) {
+		if (mmc_vdd_table[i].mask == (1 << vdd)) {
+#if DEBUG_SDSLOT_VDD
+			printk("%s: Setting level to %u\n",
+			        __func__, mmc_vdd_table[i].level);
+#endif
+			rc = vreg_set_level(vreg_sdslot,
+					    mmc_vdd_table[i].level);
+			if (rc) {
+				printk(KERN_ERR
+				       "%s: Error setting vreg level (%d)\n",
+				       __func__, rc);
+			}
+			return 0;
+		}
+	}
+
+	printk(KERN_ERR "%s: Invalid VDD %d specified\n", __func__, vdd);
+	return 0;
+}
+
+static unsigned int trout_sdslot_status(struct device *dev)
+{
+	unsigned int status;
+
+	status = (unsigned int) gpio_get_value(TROUT_GPIO_SDMC_CD_N);
+	return (!status);
+}
+
+#define TROUT_MMC_VDD	MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 \
+			| MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 \
+			| MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 \
+			| MMC_VDD_28_29 | MMC_VDD_29_30
+
+static struct msm_mmc_platform_data trout_sdslot_data = {
+	.ocr_mask	= TROUT_MMC_VDD,
+	.status		= trout_sdslot_status,
+	.translate_vdd	= trout_sdslot_switchvdd,
+};
+
+int __init trout_init_mmc(unsigned int sys_rev)
+{
+	sdslot_vreg_enabled = 0;
+
+	vreg_sdslot = vreg_get(0, "gp6");
+	if (IS_ERR(vreg_sdslot))
+		return PTR_ERR(vreg_sdslot);
+
+	set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1);
+
+	if (!opt_disable_sdcard)
+		msm_add_sdcc(2, &trout_sdslot_data,
+			     TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 0);
+	else
+		printk(KERN_INFO "trout: SD-Card interface disabled\n");
+	return 0;
+}
+
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index dca5a5f062dc..73f146066542 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -30,6 +30,8 @@
 #include "devices.h"
 #include "board-trout.h"
 
+extern int trout_init_mmc(unsigned int);
+
 static struct platform_device *devices[] __initdata = {
 	&msm_device_uart3,
 	&msm_device_smd,
@@ -50,13 +52,21 @@ static void __init trout_fixup(struct machine_desc *desc, struct tag *tags,
 {
 	mi->nr_banks = 1;
 	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
 	mi->bank[0].size = (101*1024*1024);
 }
 
 static void __init trout_init(void)
 {
+	int rc;
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+#ifdef CONFIG_MMC
+        rc = trout_init_mmc(system_rev);
+        if (rc)
+                printk(KERN_CRIT "%s: MMC init failure (%d)\n", __func__, rc);
+#endif
+
 }
 
 static struct map_desc trout_io_desc[] __initdata = {
@@ -83,8 +93,6 @@ static void __init trout_map_io(void)
 
 MACHINE_START(TROUT, "HTC Dream")
 #ifdef CONFIG_MSM_DEBUG_UART
-	.phys_io	= MSM_DEBUG_UART_PHYS,
-	.io_pg_offst	= ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
 #endif
 	.boot_params	= 0x10000100,
 	.fixup		= trout_fixup,
diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h
index 4f345a5a0a61..651851c3e1dd 100644
--- a/arch/arm/mach-msm/board-trout.h
+++ b/arch/arm/mach-msm/board-trout.h
@@ -1,5 +1,162 @@
+/* linux/arch/arm/mach-msm/board-trout.h
+** Author: Brian Swetland <swetland@google.com>
+*/
+#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
+#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
+
+#include <mach/board.h>
+
+#define MSM_SMI_BASE		0x00000000
+#define MSM_SMI_SIZE		0x00800000
+
+#define MSM_EBI_BASE		0x10000000
+#define MSM_EBI_SIZE		0x06e00000
+
+#define MSM_PMEM_GPU0_BASE	0x00000000
+#define MSM_PMEM_GPU0_SIZE	0x00700000
+
+#define MSM_PMEM_MDP_BASE	0x02000000
+#define MSM_PMEM_MDP_SIZE	0x00800000
+
+#define MSM_PMEM_ADSP_BASE      0x02800000
+#define MSM_PMEM_ADSP_SIZE	0x00800000
+
+#define MSM_PMEM_CAMERA_BASE	0x03000000
+#define MSM_PMEM_CAMERA_SIZE	0x00800000
+
+#define MSM_FB_BASE		0x03800000
+#define MSM_FB_SIZE		0x00100000
+
+#define MSM_LINUX_BASE		MSM_EBI_BASE
+#define MSM_LINUX_SIZE		0x06500000
+
+#define MSM_PMEM_GPU1_SIZE	0x800000
+#define MSM_PMEM_GPU1_BASE	(MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE)
+
+#define MSM_RAM_CONSOLE_BASE	(MSM_EBI_BASE + 0x6d00000)
+#define MSM_RAM_CONSOLE_SIZE	(128 * SZ_1K)
+
+#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
+#error invalid memory map
+#endif
+
+#define DECLARE_MSM_IOMAP
+#include <mach/msm_iomap.h>
+
+#define TROUT_4_BALL_UP_0     1
+#define TROUT_4_BALL_LEFT_0   18
+#define TROUT_4_BALL_DOWN_0   57
+#define TROUT_4_BALL_RIGHT_0  91
+
+#define TROUT_5_BALL_UP_0     94
+#define TROUT_5_BALL_LEFT_0   18
+#define TROUT_5_BALL_DOWN_0   90
+#define TROUT_5_BALL_RIGHT_0  19
+
+#define TROUT_POWER_KEY     20
+
+#define TROUT_4_TP_LS_EN    19
+#define TROUT_5_TP_LS_EN    1
 
 #define TROUT_CPLD_BASE   0xE8100000
 #define TROUT_CPLD_START  0x98000000
 #define TROUT_CPLD_SIZE   SZ_4K
 
+#define TROUT_GPIO_CABLE_IN1		(83)
+#define TROUT_GPIO_CABLE_IN2		(49)
+
+#define TROUT_GPIO_START (128)
+
+#define TROUT_GPIO_INT_MASK0_REG            (0x0c)
+#define TROUT_GPIO_INT_STAT0_REG            (0x0e)
+#define TROUT_GPIO_INT_MASK1_REG            (0x14)
+#define TROUT_GPIO_INT_STAT1_REG            (0x10)
+
+#define TROUT_GPIO_HAPTIC_PWM               (28)
+#define TROUT_GPIO_PS_HOLD                  (25)
+
+#define TROUT_GPIO_MISC2_BASE               (TROUT_GPIO_START + 0x00)
+#define TROUT_GPIO_MISC3_BASE               (TROUT_GPIO_START + 0x08)
+#define TROUT_GPIO_MISC4_BASE               (TROUT_GPIO_START + 0x10)
+#define TROUT_GPIO_MISC5_BASE               (TROUT_GPIO_START + 0x18)
+#define TROUT_GPIO_INT2_BASE                (TROUT_GPIO_START + 0x20)
+#define TROUT_GPIO_MISC1_BASE               (TROUT_GPIO_START + 0x28)
+#define TROUT_GPIO_VIRTUAL_BASE             (TROUT_GPIO_START + 0x30)
+#define TROUT_GPIO_INT5_BASE                (TROUT_GPIO_START + 0x48)
+
+#define TROUT_GPIO_CHARGER_EN               (TROUT_GPIO_MISC2_BASE + 0)
+#define TROUT_GPIO_ISET                     (TROUT_GPIO_MISC2_BASE + 1)
+#define TROUT_GPIO_H2W_DAT_DIR              (TROUT_GPIO_MISC2_BASE + 2)
+#define TROUT_GPIO_H2W_CLK_DIR              (TROUT_GPIO_MISC2_BASE + 3)
+#define TROUT_GPIO_H2W_DAT_GPO              (TROUT_GPIO_MISC2_BASE + 4)
+#define TROUT_GPIO_H2W_CLK_GPO              (TROUT_GPIO_MISC2_BASE + 5)
+#define TROUT_GPIO_H2W_SEL0                 (TROUT_GPIO_MISC2_BASE + 6)
+#define TROUT_GPIO_H2W_SEL1                 (TROUT_GPIO_MISC2_BASE + 7)
+
+#define TROUT_GPIO_SPOTLIGHT_EN             (TROUT_GPIO_MISC3_BASE + 0)
+#define TROUT_GPIO_FLASH_EN                 (TROUT_GPIO_MISC3_BASE + 1)
+#define TROUT_GPIO_I2C_PULL                 (TROUT_GPIO_MISC3_BASE + 2)
+#define TROUT_GPIO_TP_I2C_PULL              (TROUT_GPIO_MISC3_BASE + 3)
+#define TROUT_GPIO_TP_EN                    (TROUT_GPIO_MISC3_BASE + 4)
+#define TROUT_GPIO_JOG_EN                   (TROUT_GPIO_MISC3_BASE + 5)
+#define TROUT_GPIO_UI_LED_EN                (TROUT_GPIO_MISC3_BASE + 6)
+#define TROUT_GPIO_QTKEY_LED_EN             (TROUT_GPIO_MISC3_BASE + 7)
+
+#define TROUT_GPIO_VCM_PWDN                 (TROUT_GPIO_MISC4_BASE + 0)
+#define TROUT_GPIO_USB_H2W_SW               (TROUT_GPIO_MISC4_BASE + 1)
+#define TROUT_GPIO_COMPASS_RST_N            (TROUT_GPIO_MISC4_BASE + 2)
+#define TROUT_GPIO_HAPTIC_EN_UP             (TROUT_GPIO_MISC4_BASE + 3)
+#define TROUT_GPIO_HAPTIC_EN_MAIN           (TROUT_GPIO_MISC4_BASE + 4)
+#define TROUT_GPIO_USB_PHY_RST_N            (TROUT_GPIO_MISC4_BASE + 5)
+#define TROUT_GPIO_WIFI_PA_RESETX           (TROUT_GPIO_MISC4_BASE + 6)
+#define TROUT_GPIO_WIFI_EN                  (TROUT_GPIO_MISC4_BASE + 7)
+
+#define TROUT_GPIO_BT_32K_EN                (TROUT_GPIO_MISC5_BASE + 0)
+#define TROUT_GPIO_MAC_32K_EN               (TROUT_GPIO_MISC5_BASE + 1)
+#define TROUT_GPIO_MDDI_32K_EN              (TROUT_GPIO_MISC5_BASE + 2)
+#define TROUT_GPIO_COMPASS_32K_EN           (TROUT_GPIO_MISC5_BASE + 3)
+
+#define TROUT_GPIO_NAVI_ACT_N               (TROUT_GPIO_INT2_BASE + 0)
+#define TROUT_GPIO_COMPASS_IRQ              (TROUT_GPIO_INT2_BASE + 1)
+#define TROUT_GPIO_SLIDING_DET              (TROUT_GPIO_INT2_BASE + 2)
+#define TROUT_GPIO_AUD_HSMIC_DET_N          (TROUT_GPIO_INT2_BASE + 3)
+#define TROUT_GPIO_SD_DOOR_N                (TROUT_GPIO_INT2_BASE + 4)
+#define TROUT_GPIO_CAM_BTN_STEP1_N          (TROUT_GPIO_INT2_BASE + 5)
+#define TROUT_GPIO_CAM_BTN_STEP2_N          (TROUT_GPIO_INT2_BASE + 6)
+#define TROUT_GPIO_TP_ATT_N                 (TROUT_GPIO_INT2_BASE + 7)
+#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE   (TROUT_GPIO_NAVI_ACT_N)
+#define TROUT_GPIO_BANK0_LAST_INT_SOURCE    (TROUT_GPIO_TP_ATT_N)
+
+#define TROUT_GPIO_H2W_DAT_GPI              (TROUT_GPIO_MISC1_BASE + 0)
+#define TROUT_GPIO_H2W_CLK_GPI              (TROUT_GPIO_MISC1_BASE + 1)
+#define TROUT_GPIO_CPLD128_VER_0            (TROUT_GPIO_MISC1_BASE + 4)
+#define TROUT_GPIO_CPLD128_VER_1            (TROUT_GPIO_MISC1_BASE + 5)
+#define TROUT_GPIO_CPLD128_VER_2            (TROUT_GPIO_MISC1_BASE + 6)
+#define TROUT_GPIO_CPLD128_VER_3            (TROUT_GPIO_MISC1_BASE + 7)
+
+#define TROUT_GPIO_SDMC_CD_N                (TROUT_GPIO_VIRTUAL_BASE + 0)
+#define TROUT_GPIO_END                      (TROUT_GPIO_SDMC_CD_N)
+#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE   (TROUT_GPIO_SDMC_CD_N)
+#define TROUT_GPIO_BANK1_LAST_INT_SOURCE    (TROUT_GPIO_SDMC_CD_N)
+
+#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \
+	(TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE)
+
+#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS)
+#define TROUT_INT_BANK0_COUNT (8)
+#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT)
+#define TROUT_INT_BANK1_COUNT (1)
+#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \
+			TROUT_INT_BANK1_COUNT - 1)
+#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \
+	(TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \
+	(TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n)))
+
+#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT)
+#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7))
+#define TROUT_BANK_TO_MASK_REG(bank) \
+	(bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG)
+#define TROUT_BANK_TO_STAT_REG(bank) \
+	(bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG)
+
+#endif /* GUARD */
diff --git a/arch/arm/mach-msm/clock-dummy.c b/arch/arm/mach-msm/clock-dummy.c
new file mode 100644
index 000000000000..1250d22082ee
--- /dev/null
+++ b/arch/arm/mach-msm/clock-dummy.c
@@ -0,0 +1,54 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+	return -ENOENT;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return -ENOENT;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c
index 9cb1276ab749..c57210f4f06a 100644
--- a/arch/arm/mach-msm/clock.c
+++ b/arch/arm/mach-msm/clock.c
@@ -14,7 +14,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
index fde9d8f69f10..4e8c0bcdc92d 100644
--- a/arch/arm/mach-msm/devices-msm7x00.c
+++ b/arch/arm/mach-msm/devices-msm7x00.c
@@ -322,7 +322,8 @@ static struct platform_device *msm_sdcc_devices[] __initdata = {
 	&msm_device_sdc4,
 };
 
-int __init msm_add_sdcc(unsigned int controller, struct mmc_platform_data *plat,
+int __init msm_add_sdcc(unsigned int controller,
+			struct msm_mmc_platform_data *plat,
 			unsigned int stat_irq, unsigned long stat_irq_flags)
 {
 	struct platform_device	*pdev;
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
index b449e8ad2904..7fcf2e3b7698 100644
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ b/arch/arm/mach-msm/devices-msm7x30.c
@@ -51,6 +51,11 @@ struct platform_device msm_device_uart2 = {
 	.resource	= resources_uart2,
 };
 
+struct platform_device msm_device_smd = {
+	.name   = "msm_smd",
+	.id     = -1,
+};
+
 struct clk msm_clocks_7x30[] = {
 	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
 	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
diff --git a/arch/arm/mach-msm/devices-msm8x60-iommu.c b/arch/arm/mach-msm/devices-msm8x60-iommu.c
new file mode 100644
index 000000000000..89b9d4437e92
--- /dev/null
+++ b/arch/arm/mach-msm/devices-msm8x60-iommu.c
@@ -0,0 +1,883 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/bootmem.h>
+
+#include <mach/msm_iomap-8x60.h>
+#include <mach/irqs-8x60.h>
+#include <mach/iommu.h>
+
+static struct resource msm_iommu_jpegd_resources[] = {
+	{
+		.start = MSM_IOMMU_JPEGD_PHYS,
+		.end   = MSM_IOMMU_JPEGD_PHYS + MSM_IOMMU_JPEGD_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_JPEGD_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_JPEGD_CB_SC_SECURE_IRQ,
+		.end   = SMMU_JPEGD_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_vpe_resources[] = {
+	{
+		.start = MSM_IOMMU_VPE_PHYS,
+		.end   = MSM_IOMMU_VPE_PHYS + MSM_IOMMU_VPE_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_VPE_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_VPE_CB_SC_SECURE_IRQ,
+		.end   = SMMU_VPE_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_mdp0_resources[] = {
+	{
+		.start = MSM_IOMMU_MDP0_PHYS,
+		.end   = MSM_IOMMU_MDP0_PHYS + MSM_IOMMU_MDP0_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_MDP0_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_MDP0_CB_SC_SECURE_IRQ,
+		.end   = SMMU_MDP0_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_mdp1_resources[] = {
+	{
+		.start = MSM_IOMMU_MDP1_PHYS,
+		.end   = MSM_IOMMU_MDP1_PHYS + MSM_IOMMU_MDP1_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_MDP1_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_MDP1_CB_SC_SECURE_IRQ,
+		.end   = SMMU_MDP1_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_rot_resources[] = {
+	{
+		.start = MSM_IOMMU_ROT_PHYS,
+		.end   = MSM_IOMMU_ROT_PHYS + MSM_IOMMU_ROT_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_ROT_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_ROT_CB_SC_SECURE_IRQ,
+		.end   = SMMU_ROT_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_ijpeg_resources[] = {
+	{
+		.start = MSM_IOMMU_IJPEG_PHYS,
+		.end   = MSM_IOMMU_IJPEG_PHYS + MSM_IOMMU_IJPEG_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_IJPEG_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_IJPEG_CB_SC_SECURE_IRQ,
+		.end   = SMMU_IJPEG_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_vfe_resources[] = {
+	{
+		.start = MSM_IOMMU_VFE_PHYS,
+		.end   = MSM_IOMMU_VFE_PHYS + MSM_IOMMU_VFE_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_VFE_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_VFE_CB_SC_SECURE_IRQ,
+		.end   = SMMU_VFE_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_vcodec_a_resources[] = {
+	{
+		.start = MSM_IOMMU_VCODEC_A_PHYS,
+		.end   = MSM_IOMMU_VCODEC_A_PHYS + MSM_IOMMU_VCODEC_A_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
+		.end   = SMMU_VCODEC_A_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_vcodec_b_resources[] = {
+	{
+		.start = MSM_IOMMU_VCODEC_B_PHYS,
+		.end   = MSM_IOMMU_VCODEC_B_PHYS + MSM_IOMMU_VCODEC_B_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
+		.end   = SMMU_VCODEC_B_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_gfx3d_resources[] = {
+	{
+		.start = MSM_IOMMU_GFX3D_PHYS,
+		.end   = MSM_IOMMU_GFX3D_PHYS + MSM_IOMMU_GFX3D_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_GFX3D_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_GFX3D_CB_SC_SECURE_IRQ,
+		.end   = SMMU_GFX3D_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msm_iommu_gfx2d0_resources[] = {
+	{
+		.start = MSM_IOMMU_GFX2D0_PHYS,
+		.end   = MSM_IOMMU_GFX2D0_PHYS + MSM_IOMMU_GFX2D0_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
+		.end   = SMMU_GFX2D0_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device msm_root_iommu_dev = {
+	.name = "msm_iommu",
+	.id = -1,
+};
+
+static struct msm_iommu_dev jpegd_smmu = {
+	.name = "jpegd",
+	.clk_rate = -1
+};
+
+static struct msm_iommu_dev vpe_smmu = {
+	.name = "vpe"
+};
+
+static struct msm_iommu_dev mdp0_smmu = {
+	.name = "mdp0"
+};
+
+static struct msm_iommu_dev mdp1_smmu = {
+	.name = "mdp1"
+};
+
+static struct msm_iommu_dev rot_smmu = {
+	.name = "rot"
+};
+
+static struct msm_iommu_dev ijpeg_smmu = {
+	.name = "ijpeg"
+};
+
+static struct msm_iommu_dev vfe_smmu = {
+	.name = "vfe",
+	.clk_rate = -1
+};
+
+static struct msm_iommu_dev vcodec_a_smmu = {
+	.name = "vcodec_a"
+};
+
+static struct msm_iommu_dev vcodec_b_smmu = {
+	.name = "vcodec_b"
+};
+
+static struct msm_iommu_dev gfx3d_smmu = {
+	.name = "gfx3d",
+	.clk_rate = 27000000
+};
+
+static struct msm_iommu_dev gfx2d0_smmu = {
+	.name = "gfx2d0",
+	.clk_rate = 27000000
+};
+
+static struct platform_device msm_device_smmu_jpegd = {
+	.name = "msm_iommu",
+	.id = 0,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_jpegd_resources),
+	.resource = msm_iommu_jpegd_resources,
+};
+
+static struct platform_device msm_device_smmu_vpe = {
+	.name = "msm_iommu",
+	.id = 1,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_vpe_resources),
+	.resource = msm_iommu_vpe_resources,
+};
+
+static struct platform_device msm_device_smmu_mdp0 = {
+	.name = "msm_iommu",
+	.id = 2,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_mdp0_resources),
+	.resource = msm_iommu_mdp0_resources,
+};
+
+static struct platform_device msm_device_smmu_mdp1 = {
+	.name = "msm_iommu",
+	.id = 3,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_mdp1_resources),
+	.resource = msm_iommu_mdp1_resources,
+};
+
+static struct platform_device msm_device_smmu_rot = {
+	.name = "msm_iommu",
+	.id = 4,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_rot_resources),
+	.resource = msm_iommu_rot_resources,
+};
+
+static struct platform_device msm_device_smmu_ijpeg = {
+	.name = "msm_iommu",
+	.id = 5,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_ijpeg_resources),
+	.resource = msm_iommu_ijpeg_resources,
+};
+
+static struct platform_device msm_device_smmu_vfe = {
+	.name = "msm_iommu",
+	.id = 6,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_vfe_resources),
+	.resource = msm_iommu_vfe_resources,
+};
+
+static struct platform_device msm_device_smmu_vcodec_a = {
+	.name = "msm_iommu",
+	.id = 7,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_vcodec_a_resources),
+	.resource = msm_iommu_vcodec_a_resources,
+};
+
+static struct platform_device msm_device_smmu_vcodec_b = {
+	.name = "msm_iommu",
+	.id = 8,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_vcodec_b_resources),
+	.resource = msm_iommu_vcodec_b_resources,
+};
+
+static struct platform_device msm_device_smmu_gfx3d = {
+	.name = "msm_iommu",
+	.id = 9,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_gfx3d_resources),
+	.resource = msm_iommu_gfx3d_resources,
+};
+
+static struct platform_device msm_device_smmu_gfx2d0 = {
+	.name = "msm_iommu",
+	.id = 10,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_gfx2d0_resources),
+	.resource = msm_iommu_gfx2d0_resources,
+};
+
+static struct msm_iommu_ctx_dev jpegd_src_ctx = {
+	.name = "jpegd_src",
+	.num = 0,
+	.mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev jpegd_dst_ctx = {
+	.name = "jpegd_dst",
+	.num = 1,
+	.mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev vpe_src_ctx = {
+	.name = "vpe_src",
+	.num = 0,
+	.mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev vpe_dst_ctx = {
+	.name = "vpe_dst",
+	.num = 1,
+	.mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_vg1_ctx = {
+	.name = "mdp_vg1",
+	.num = 0,
+	.mids = {0, 2, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_rgb1_ctx = {
+	.name = "mdp_rgb1",
+	.num = 1,
+	.mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_vg2_ctx = {
+	.name = "mdp_vg2",
+	.num = 0,
+	.mids = {0, 2, -1}
+};
+
+static struct msm_iommu_ctx_dev mdp_rgb2_ctx = {
+	.name = "mdp_rgb2",
+	.num = 1,
+	.mids = {1, 3, 4, 5, 6, 7, 8, 9, 10, -1}
+};
+
+static struct msm_iommu_ctx_dev rot_src_ctx = {
+	.name = "rot_src",
+	.num = 0,
+	.mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev rot_dst_ctx = {
+	.name = "rot_dst",
+	.num = 1,
+	.mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev ijpeg_src_ctx = {
+	.name = "ijpeg_src",
+	.num = 0,
+	.mids = {0, -1}
+};
+
+static struct msm_iommu_ctx_dev ijpeg_dst_ctx = {
+	.name = "ijpeg_dst",
+	.num = 1,
+	.mids = {1, -1}
+};
+
+static struct msm_iommu_ctx_dev vfe_imgwr_ctx = {
+	.name = "vfe_imgwr",
+	.num = 0,
+	.mids = {2, 3, 4, 5, 6, 7, 8, -1}
+};
+
+static struct msm_iommu_ctx_dev vfe_misc_ctx = {
+	.name = "vfe_misc",
+	.num = 1,
+	.mids = {0, 1, 9, -1}
+};
+
+static struct msm_iommu_ctx_dev vcodec_a_stream_ctx = {
+	.name = "vcodec_a_stream",
+	.num = 0,
+	.mids = {2, 5, -1}
+};
+
+static struct msm_iommu_ctx_dev vcodec_a_mm1_ctx = {
+	.name = "vcodec_a_mm1",
+	.num = 1,
+	.mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
+};
+
+static struct msm_iommu_ctx_dev vcodec_b_mm2_ctx = {
+	.name = "vcodec_b_mm2",
+	.num = 0,
+	.mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx3d_rbpa_ctx = {
+	.name = "gfx3d_rbpa",
+	.num = 0,
+	.mids = {-1}
+};
+
+static struct msm_iommu_ctx_dev gfx3d_cpvgttc_ctx = {
+	.name = "gfx3d_cpvgttc",
+	.num = 1,
+	.mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx3d_smmu_ctx = {
+	.name = "gfx3d_smmu",
+	.num = 2,
+	.mids = {8, 9, 10, 11, 12, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx2d0_pixv1_ctx = {
+	.name = "gfx2d0_pixv1_smmu",
+	.num = 0,
+	.mids = {0, 3, 4, -1}
+};
+
+static struct msm_iommu_ctx_dev gfx2d0_texv3_ctx = {
+	.name = "gfx2d0_texv3_smmu",
+	.num = 1,
+	.mids = {1, 6, 7, -1}
+};
+
+static struct platform_device msm_device_jpegd_src_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 0,
+	.dev = {
+		.parent = &msm_device_smmu_jpegd.dev,
+	},
+};
+
+static struct platform_device msm_device_jpegd_dst_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 1,
+	.dev = {
+		.parent = &msm_device_smmu_jpegd.dev,
+	},
+};
+
+static struct platform_device msm_device_vpe_src_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 2,
+	.dev = {
+		.parent = &msm_device_smmu_vpe.dev,
+	},
+};
+
+static struct platform_device msm_device_vpe_dst_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 3,
+	.dev = {
+		.parent = &msm_device_smmu_vpe.dev,
+	},
+};
+
+static struct platform_device msm_device_mdp_vg1_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 4,
+	.dev = {
+		.parent = &msm_device_smmu_mdp0.dev,
+	},
+};
+
+static struct platform_device msm_device_mdp_rgb1_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 5,
+	.dev = {
+		.parent = &msm_device_smmu_mdp0.dev,
+	},
+};
+
+static struct platform_device msm_device_mdp_vg2_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 6,
+	.dev = {
+		.parent = &msm_device_smmu_mdp1.dev,
+	},
+};
+
+static struct platform_device msm_device_mdp_rgb2_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 7,
+	.dev = {
+		.parent = &msm_device_smmu_mdp1.dev,
+	},
+};
+
+static struct platform_device msm_device_rot_src_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 8,
+	.dev = {
+		.parent = &msm_device_smmu_rot.dev,
+	},
+};
+
+static struct platform_device msm_device_rot_dst_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 9,
+	.dev = {
+		.parent = &msm_device_smmu_rot.dev,
+	},
+};
+
+static struct platform_device msm_device_ijpeg_src_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 10,
+	.dev = {
+		.parent = &msm_device_smmu_ijpeg.dev,
+	},
+};
+
+static struct platform_device msm_device_ijpeg_dst_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 11,
+	.dev = {
+		.parent = &msm_device_smmu_ijpeg.dev,
+	},
+};
+
+static struct platform_device msm_device_vfe_imgwr_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 12,
+	.dev = {
+		.parent = &msm_device_smmu_vfe.dev,
+	},
+};
+
+static struct platform_device msm_device_vfe_misc_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 13,
+	.dev = {
+		.parent = &msm_device_smmu_vfe.dev,
+	},
+};
+
+static struct platform_device msm_device_vcodec_a_stream_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 14,
+	.dev = {
+		.parent = &msm_device_smmu_vcodec_a.dev,
+	},
+};
+
+static struct platform_device msm_device_vcodec_a_mm1_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 15,
+	.dev = {
+		.parent = &msm_device_smmu_vcodec_a.dev,
+	},
+};
+
+static struct platform_device msm_device_vcodec_b_mm2_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 16,
+	.dev = {
+		.parent = &msm_device_smmu_vcodec_b.dev,
+	},
+};
+
+static struct platform_device msm_device_gfx3d_rbpa_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 17,
+	.dev = {
+		.parent = &msm_device_smmu_gfx3d.dev,
+	},
+};
+
+static struct platform_device msm_device_gfx3d_cpvgttc_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 18,
+	.dev = {
+		.parent = &msm_device_smmu_gfx3d.dev,
+	},
+};
+
+static struct platform_device msm_device_gfx3d_smmu_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 19,
+	.dev = {
+		.parent = &msm_device_smmu_gfx3d.dev,
+	},
+};
+
+static struct platform_device msm_device_gfx2d0_pixv1_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 20,
+	.dev = {
+		.parent = &msm_device_smmu_gfx2d0.dev,
+	},
+};
+
+static struct platform_device msm_device_gfx2d0_texv3_ctx = {
+	.name = "msm_iommu_ctx",
+	.id = 21,
+	.dev = {
+		.parent = &msm_device_smmu_gfx2d0.dev,
+	},
+};
+
+static struct platform_device *msm_iommu_devs[] = {
+	&msm_device_smmu_jpegd,
+	&msm_device_smmu_vpe,
+	&msm_device_smmu_mdp0,
+	&msm_device_smmu_mdp1,
+	&msm_device_smmu_rot,
+	&msm_device_smmu_ijpeg,
+	&msm_device_smmu_vfe,
+	&msm_device_smmu_vcodec_a,
+	&msm_device_smmu_vcodec_b,
+	&msm_device_smmu_gfx3d,
+	&msm_device_smmu_gfx2d0,
+};
+
+static struct msm_iommu_dev *msm_iommu_data[] = {
+	&jpegd_smmu,
+	&vpe_smmu,
+	&mdp0_smmu,
+	&mdp1_smmu,
+	&rot_smmu,
+	&ijpeg_smmu,
+	&vfe_smmu,
+	&vcodec_a_smmu,
+	&vcodec_b_smmu,
+	&gfx3d_smmu,
+	&gfx2d0_smmu,
+};
+
+static struct platform_device *msm_iommu_ctx_devs[] = {
+	&msm_device_jpegd_src_ctx,
+	&msm_device_jpegd_dst_ctx,
+	&msm_device_vpe_src_ctx,
+	&msm_device_vpe_dst_ctx,
+	&msm_device_mdp_vg1_ctx,
+	&msm_device_mdp_rgb1_ctx,
+	&msm_device_mdp_vg2_ctx,
+	&msm_device_mdp_rgb2_ctx,
+	&msm_device_rot_src_ctx,
+	&msm_device_rot_dst_ctx,
+	&msm_device_ijpeg_src_ctx,
+	&msm_device_ijpeg_dst_ctx,
+	&msm_device_vfe_imgwr_ctx,
+	&msm_device_vfe_misc_ctx,
+	&msm_device_vcodec_a_stream_ctx,
+	&msm_device_vcodec_a_mm1_ctx,
+	&msm_device_vcodec_b_mm2_ctx,
+	&msm_device_gfx3d_rbpa_ctx,
+	&msm_device_gfx3d_cpvgttc_ctx,
+	&msm_device_gfx3d_smmu_ctx,
+	&msm_device_gfx2d0_pixv1_ctx,
+	&msm_device_gfx2d0_texv3_ctx,
+};
+
+static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = {
+	&jpegd_src_ctx,
+	&jpegd_dst_ctx,
+	&vpe_src_ctx,
+	&vpe_dst_ctx,
+	&mdp_vg1_ctx,
+	&mdp_rgb1_ctx,
+	&mdp_vg2_ctx,
+	&mdp_rgb2_ctx,
+	&rot_src_ctx,
+	&rot_dst_ctx,
+	&ijpeg_src_ctx,
+	&ijpeg_dst_ctx,
+	&vfe_imgwr_ctx,
+	&vfe_misc_ctx,
+	&vcodec_a_stream_ctx,
+	&vcodec_a_mm1_ctx,
+	&vcodec_b_mm2_ctx,
+	&gfx3d_rbpa_ctx,
+	&gfx3d_cpvgttc_ctx,
+	&gfx3d_smmu_ctx,
+	&gfx2d0_pixv1_ctx,
+	&gfx2d0_texv3_ctx,
+};
+
+static int msm8x60_iommu_init(void)
+{
+	int ret, i;
+
+	ret = platform_device_register(&msm_root_iommu_dev);
+	if (ret != 0) {
+		pr_err("Failed to register root IOMMU device!\n");
+		goto failure;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); i++) {
+		ret = platform_device_add_data(msm_iommu_devs[i],
+					       msm_iommu_data[i],
+					       sizeof(struct msm_iommu_dev));
+		if (ret != 0) {
+			pr_err("platform_device_add_data failed, "
+			       "i = %d\n", i);
+			goto failure_unwind;
+		}
+
+		ret = platform_device_register(msm_iommu_devs[i]);
+
+		if (ret != 0) {
+			pr_err("platform_device_register smmu failed, "
+			       "i = %d\n", i);
+			goto failure_unwind;
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++) {
+		ret = platform_device_add_data(msm_iommu_ctx_devs[i],
+					       msm_iommu_ctx_data[i],
+					       sizeof(*msm_iommu_ctx_devs[i]));
+		if (ret != 0) {
+			pr_err("platform_device_add_data smmu failed, "
+			       "i = %d\n", i);
+			goto failure_unwind2;
+		}
+
+		ret = platform_device_register(msm_iommu_ctx_devs[i]);
+		if (ret != 0) {
+			pr_err("platform_device_register ctx failed, "
+			       "i = %d\n", i);
+			goto failure_unwind2;
+		}
+	}
+	return 0;
+
+failure_unwind2:
+	while (--i >= 0)
+		platform_device_unregister(msm_iommu_ctx_devs[i]);
+failure_unwind:
+	while (--i >= 0)
+		platform_device_unregister(msm_iommu_devs[i]);
+
+	platform_device_unregister(&msm_root_iommu_dev);
+failure:
+	return ret;
+}
+
+static void msm8x60_iommu_exit(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(msm_iommu_ctx_devs); i++)
+		platform_device_unregister(msm_iommu_ctx_devs[i]);
+
+	for (i = 0; i < ARRAY_SIZE(msm_iommu_devs); ++i)
+		platform_device_unregister(msm_iommu_devs[i]);
+
+	platform_device_unregister(&msm_root_iommu_dev);
+}
+
+subsys_initcall(msm8x60_iommu_init);
+module_exit(msm8x60_iommu_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index 4d4a50785e34..6fe67c5d1ae0 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -48,6 +48,11 @@ struct platform_device msm_device_uart3 = {
 	.resource	= resources_uart3,
 };
 
+struct platform_device msm_device_smd = {
+	.name   = "msm_smd",
+	.id     = -1,
+};
+
 struct clk msm_clocks_8x50[] = {
 	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
 	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
diff --git a/arch/arm/mach-msm/gpio.c b/arch/arm/mach-msm/gpio.c
index bc32c845c7b0..33051b509e88 100644
--- a/arch/arm/mach-msm/gpio.c
+++ b/arch/arm/mach-msm/gpio.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-msm/gpio.c
  *
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -14,72 +14,363 @@
  *
  */
 
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
 #include <linux/module.h>
-#include <mach/gpio.h>
-#include "proc_comm.h"
-
-int gpio_tlmm_config(unsigned config, unsigned disable)
-{
-	return msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, &disable);
-}
-EXPORT_SYMBOL(gpio_tlmm_config);
-
-int msm_gpios_enable(const struct msm_gpio *table, int size)
-{
-	int rc;
-	int i;
-	const struct msm_gpio *g;
-	for (i = 0; i < size; i++) {
-		g = table + i;
-		rc = gpio_tlmm_config(g->gpio_cfg, GPIO_ENABLE);
-		if (rc) {
-			pr_err("gpio_tlmm_config(0x%08x, GPIO_ENABLE)"
-			       " <%s> failed: %d\n",
-			       g->gpio_cfg, g->label ?: "?", rc);
-			pr_err("pin %d func %d dir %d pull %d drvstr %d\n",
-			       GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg),
-			       GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg),
-			       GPIO_DRVSTR(g->gpio_cfg));
-			goto err;
-		}
+#include "gpio_hw.h"
+#include "gpiomux.h"
+
+#define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0)
+
+#define MSM_GPIO_BANK(bank, first, last)				\
+	{								\
+		.regs = {						\
+			.out =         MSM_GPIO_OUT_##bank,		\
+			.in =          MSM_GPIO_IN_##bank,		\
+			.int_status =  MSM_GPIO_INT_STATUS_##bank,	\
+			.int_clear =   MSM_GPIO_INT_CLEAR_##bank,	\
+			.int_en =      MSM_GPIO_INT_EN_##bank,		\
+			.int_edge =    MSM_GPIO_INT_EDGE_##bank,	\
+			.int_pos =     MSM_GPIO_INT_POS_##bank,		\
+			.oe =          MSM_GPIO_OE_##bank,		\
+		},							\
+		.chip = {						\
+			.base = (first),				\
+			.ngpio = (last) - (first) + 1,			\
+			.get = msm_gpio_get,				\
+			.set = msm_gpio_set,				\
+			.direction_input = msm_gpio_direction_input,	\
+			.direction_output = msm_gpio_direction_output,	\
+			.to_irq = msm_gpio_to_irq,			\
+			.request = msm_gpio_request,			\
+			.free = msm_gpio_free,				\
+		}							\
 	}
+
+#define MSM_GPIO_BROKEN_INT_CLEAR 1
+
+struct msm_gpio_regs {
+	void __iomem *out;
+	void __iomem *in;
+	void __iomem *int_status;
+	void __iomem *int_clear;
+	void __iomem *int_en;
+	void __iomem *int_edge;
+	void __iomem *int_pos;
+	void __iomem *oe;
+};
+
+struct msm_gpio_chip {
+	spinlock_t		lock;
+	struct gpio_chip	chip;
+	struct msm_gpio_regs	regs;
+#if MSM_GPIO_BROKEN_INT_CLEAR
+	unsigned                int_status_copy;
+#endif
+	unsigned int            both_edge_detect;
+	unsigned int            int_enable[2]; /* 0: awake, 1: sleep */
+};
+
+static int msm_gpio_write(struct msm_gpio_chip *msm_chip,
+			  unsigned offset, unsigned on)
+{
+	unsigned mask = BIT(offset);
+	unsigned val;
+
+	val = readl(msm_chip->regs.out);
+	if (on)
+		writel(val | mask, msm_chip->regs.out);
+	else
+		writel(val & ~mask, msm_chip->regs.out);
 	return 0;
-err:
-	msm_gpios_disable(table, i);
-	return rc;
-}
-EXPORT_SYMBOL(msm_gpios_enable);
-
-void msm_gpios_disable(const struct msm_gpio *table, int size)
-{
-	int rc;
-	int i;
-	const struct msm_gpio *g;
-	for (i = size-1; i >= 0; i--) {
-		g = table + i;
-		rc = gpio_tlmm_config(g->gpio_cfg, GPIO_DISABLE);
-		if (rc) {
-			pr_err("gpio_tlmm_config(0x%08x, GPIO_DISABLE)"
-			       " <%s> failed: %d\n",
-			       g->gpio_cfg, g->label ?: "?", rc);
-			pr_err("pin %d func %d dir %d pull %d drvstr %d\n",
-			       GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg),
-			       GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg),
-			       GPIO_DRVSTR(g->gpio_cfg));
-		}
+}
+
+static void msm_gpio_update_both_edge_detect(struct msm_gpio_chip *msm_chip)
+{
+	int loop_limit = 100;
+	unsigned pol, val, val2, intstat;
+	do {
+		val = readl(msm_chip->regs.in);
+		pol = readl(msm_chip->regs.int_pos);
+		pol = (pol & ~msm_chip->both_edge_detect) |
+		      (~val & msm_chip->both_edge_detect);
+		writel(pol, msm_chip->regs.int_pos);
+		intstat = readl(msm_chip->regs.int_status);
+		val2 = readl(msm_chip->regs.in);
+		if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0)
+			return;
+	} while (loop_limit-- > 0);
+	printk(KERN_ERR "msm_gpio_update_both_edge_detect, "
+	       "failed to reach stable state %x != %x\n", val, val2);
+}
+
+static int msm_gpio_clear_detect_status(struct msm_gpio_chip *msm_chip,
+					unsigned offset)
+{
+	unsigned bit = BIT(offset);
+
+#if MSM_GPIO_BROKEN_INT_CLEAR
+	/* Save interrupts that already triggered before we loose them. */
+	/* Any interrupt that triggers between the read of int_status */
+	/* and the write to int_clear will still be lost though. */
+	msm_chip->int_status_copy |= readl(msm_chip->regs.int_status);
+	msm_chip->int_status_copy &= ~bit;
+#endif
+	writel(bit, msm_chip->regs.int_clear);
+	msm_gpio_update_both_edge_detect(msm_chip);
+	return 0;
+}
+
+static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct msm_gpio_chip *msm_chip;
+	unsigned long irq_flags;
+
+	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	writel(readl(msm_chip->regs.oe) & ~BIT(offset), msm_chip->regs.oe);
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+	return 0;
+}
+
+static int
+msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct msm_gpio_chip *msm_chip;
+	unsigned long irq_flags;
+
+	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	msm_gpio_write(msm_chip, offset, value);
+	writel(readl(msm_chip->regs.oe) | BIT(offset), msm_chip->regs.oe);
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+	return 0;
+}
+
+static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct msm_gpio_chip *msm_chip;
+
+	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+	return (readl(msm_chip->regs.in) & (1U << offset)) ? 1 : 0;
+}
+
+static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct msm_gpio_chip *msm_chip;
+	unsigned long irq_flags;
+
+	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	msm_gpio_write(msm_chip, offset, value);
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return MSM_GPIO_TO_INT(chip->base + offset);
+}
+
+#ifdef CONFIG_MSM_GPIOMUX
+static int msm_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return msm_gpiomux_get(chip->base + offset);
+}
+
+static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	msm_gpiomux_put(chip->base + offset);
+}
+#else
+#define msm_gpio_request NULL
+#define msm_gpio_free NULL
+#endif
+
+struct msm_gpio_chip msm_gpio_chips[] = {
+#if defined(CONFIG_ARCH_MSM7X00A)
+	MSM_GPIO_BANK(0,   0,  15),
+	MSM_GPIO_BANK(1,  16,  42),
+	MSM_GPIO_BANK(2,  43,  67),
+	MSM_GPIO_BANK(3,  68,  94),
+	MSM_GPIO_BANK(4,  95, 106),
+	MSM_GPIO_BANK(5, 107, 121),
+#elif defined(CONFIG_ARCH_MSM7X25) || defined(CONFIG_ARCH_MSM7X27)
+	MSM_GPIO_BANK(0,   0,  15),
+	MSM_GPIO_BANK(1,  16,  42),
+	MSM_GPIO_BANK(2,  43,  67),
+	MSM_GPIO_BANK(3,  68,  94),
+	MSM_GPIO_BANK(4,  95, 106),
+	MSM_GPIO_BANK(5, 107, 132),
+#elif defined(CONFIG_ARCH_MSM7X30)
+	MSM_GPIO_BANK(0,   0,  15),
+	MSM_GPIO_BANK(1,  16,  43),
+	MSM_GPIO_BANK(2,  44,  67),
+	MSM_GPIO_BANK(3,  68,  94),
+	MSM_GPIO_BANK(4,  95, 106),
+	MSM_GPIO_BANK(5, 107, 133),
+	MSM_GPIO_BANK(6, 134, 150),
+	MSM_GPIO_BANK(7, 151, 181),
+#elif defined(CONFIG_ARCH_QSD8X50)
+	MSM_GPIO_BANK(0,   0,  15),
+	MSM_GPIO_BANK(1,  16,  42),
+	MSM_GPIO_BANK(2,  43,  67),
+	MSM_GPIO_BANK(3,  68,  94),
+	MSM_GPIO_BANK(4,  95, 103),
+	MSM_GPIO_BANK(5, 104, 121),
+	MSM_GPIO_BANK(6, 122, 152),
+	MSM_GPIO_BANK(7, 153, 164),
+#endif
+};
+
+static void msm_gpio_irq_ack(unsigned int irq)
+{
+	unsigned long irq_flags;
+	struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	msm_gpio_clear_detect_status(msm_chip,
+				     irq - gpio_to_irq(msm_chip->chip.base));
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static void msm_gpio_irq_mask(unsigned int irq)
+{
+	unsigned long irq_flags;
+	struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+	unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	/* level triggered interrupts are also latched */
+	if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
+		msm_gpio_clear_detect_status(msm_chip, offset);
+	msm_chip->int_enable[0] &= ~BIT(offset);
+	writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static void msm_gpio_irq_unmask(unsigned int irq)
+{
+	unsigned long irq_flags;
+	struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+	unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	/* level triggered interrupts are also latched */
+	if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
+		msm_gpio_clear_detect_status(msm_chip, offset);
+	msm_chip->int_enable[0] |= BIT(offset);
+	writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+}
+
+static int msm_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	unsigned long irq_flags;
+	struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+	unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+
+	if (on)
+		msm_chip->int_enable[1] |= BIT(offset);
+	else
+		msm_chip->int_enable[1] &= ~BIT(offset);
+
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+	return 0;
+}
+
+static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	unsigned long irq_flags;
+	struct msm_gpio_chip *msm_chip = get_irq_chip_data(irq);
+	unsigned offset = irq - gpio_to_irq(msm_chip->chip.base);
+	unsigned val, mask = BIT(offset);
+
+	spin_lock_irqsave(&msm_chip->lock, irq_flags);
+	val = readl(msm_chip->regs.int_edge);
+	if (flow_type & IRQ_TYPE_EDGE_BOTH) {
+		writel(val | mask, msm_chip->regs.int_edge);
+		irq_desc[irq].handle_irq = handle_edge_irq;
+	} else {
+		writel(val & ~mask, msm_chip->regs.int_edge);
+		irq_desc[irq].handle_irq = handle_level_irq;
+	}
+	if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
+		msm_chip->both_edge_detect |= mask;
+		msm_gpio_update_both_edge_detect(msm_chip);
+	} else {
+		msm_chip->both_edge_detect &= ~mask;
+		val = readl(msm_chip->regs.int_pos);
+		if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
+			writel(val | mask, msm_chip->regs.int_pos);
+		else
+			writel(val & ~mask, msm_chip->regs.int_pos);
 	}
+	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
+	return 0;
 }
-EXPORT_SYMBOL(msm_gpios_disable);
 
-int msm_gpios_request_enable(const struct msm_gpio *table, int size)
+static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
-	int rc = msm_gpios_enable(table, size);
-	return rc;
+	int i, j, mask;
+	unsigned val;
+
+	for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) {
+		struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i];
+		val = readl(msm_chip->regs.int_status);
+		val &= msm_chip->int_enable[0];
+		while (val) {
+			mask = val & -val;
+			j = fls(mask) - 1;
+			/* printk("%s %08x %08x bit %d gpio %d irq %d\n",
+				__func__, v, m, j, msm_chip->chip.start + j,
+				FIRST_GPIO_IRQ + msm_chip->chip.start + j); */
+			val &= ~mask;
+			generic_handle_irq(FIRST_GPIO_IRQ +
+					   msm_chip->chip.base + j);
+		}
+	}
+	desc->chip->ack(irq);
 }
-EXPORT_SYMBOL(msm_gpios_request_enable);
 
-void msm_gpios_disable_free(const struct msm_gpio *table, int size)
+static struct irq_chip msm_gpio_irq_chip = {
+	.name      = "msmgpio",
+	.ack       = msm_gpio_irq_ack,
+	.mask      = msm_gpio_irq_mask,
+	.unmask    = msm_gpio_irq_unmask,
+	.set_wake  = msm_gpio_irq_set_wake,
+	.set_type  = msm_gpio_irq_set_type,
+};
+
+static int __init msm_init_gpio(void)
 {
-	msm_gpios_disable(table, size);
+	int i, j = 0;
+
+	for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) {
+		if (i - FIRST_GPIO_IRQ >=
+			msm_gpio_chips[j].chip.base +
+			msm_gpio_chips[j].chip.ngpio)
+			j++;
+		set_irq_chip_data(i, &msm_gpio_chips[j]);
+		set_irq_chip(i, &msm_gpio_irq_chip);
+		set_irq_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) {
+		spin_lock_init(&msm_gpio_chips[i].lock);
+		writel(0, msm_gpio_chips[i].regs.int_en);
+		gpiochip_add(&msm_gpio_chips[i].chip);
+	}
+
+	set_irq_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler);
+	set_irq_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler);
+	set_irq_wake(INT_GPIO_GROUP1, 1);
+	set_irq_wake(INT_GPIO_GROUP2, 2);
+	return 0;
 }
-EXPORT_SYMBOL(msm_gpios_disable_free);
+
+postcore_initcall(msm_init_gpio);
diff --git a/arch/arm/mach-msm/gpio_hw.h b/arch/arm/mach-msm/gpio_hw.h
new file mode 100644
index 000000000000..6b5066038baa
--- /dev/null
+++ b/arch/arm/mach-msm/gpio_hw.h
@@ -0,0 +1,278 @@
+/* arch/arm/mach-msm/gpio_hw.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H
+#define __ARCH_ARM_MACH_MSM_GPIO_HW_H
+
+#include <mach/msm_iomap.h>
+
+/* see 80-VA736-2 Rev C pp 695-751
+**
+** These are actually the *shadow* gpio registers, since the
+** real ones (which allow full access) are only available to the
+** ARM9 side of the world.
+**
+** Since the _BASE need to be page-aligned when we're mapping them
+** to virtual addresses, adjust for the additional offset in these
+** macros.
+*/
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off))
+#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off))
+#else
+#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off))
+#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off))
+#endif
+
+#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X25) ||\
+    defined(CONFIG_ARCH_MSM7X27)
+
+/* output value */
+#define MSM_GPIO_OUT_0         MSM_GPIO1_REG(0x00)  /* gpio  15-0  */
+#define MSM_GPIO_OUT_1         MSM_GPIO2_REG(0x00)  /* gpio  42-16 */
+#define MSM_GPIO_OUT_2         MSM_GPIO1_REG(0x04)  /* gpio  67-43 */
+#define MSM_GPIO_OUT_3         MSM_GPIO1_REG(0x08)  /* gpio  94-68 */
+#define MSM_GPIO_OUT_4         MSM_GPIO1_REG(0x0C)  /* gpio 106-95 */
+#define MSM_GPIO_OUT_5         MSM_GPIO1_REG(0x50)  /* gpio 107-121 */
+
+/* same pin map as above, output enable */
+#define MSM_GPIO_OE_0          MSM_GPIO1_REG(0x10)
+#define MSM_GPIO_OE_1          MSM_GPIO2_REG(0x08)
+#define MSM_GPIO_OE_2          MSM_GPIO1_REG(0x14)
+#define MSM_GPIO_OE_3          MSM_GPIO1_REG(0x18)
+#define MSM_GPIO_OE_4          MSM_GPIO1_REG(0x1C)
+#define MSM_GPIO_OE_5          MSM_GPIO1_REG(0x54)
+
+/* same pin map as above, input read */
+#define MSM_GPIO_IN_0          MSM_GPIO1_REG(0x34)
+#define MSM_GPIO_IN_1          MSM_GPIO2_REG(0x20)
+#define MSM_GPIO_IN_2          MSM_GPIO1_REG(0x38)
+#define MSM_GPIO_IN_3          MSM_GPIO1_REG(0x3C)
+#define MSM_GPIO_IN_4          MSM_GPIO1_REG(0x40)
+#define MSM_GPIO_IN_5          MSM_GPIO1_REG(0x44)
+
+/* same pin map as above, 1=edge 0=level interrup */
+#define MSM_GPIO_INT_EDGE_0    MSM_GPIO1_REG(0x60)
+#define MSM_GPIO_INT_EDGE_1    MSM_GPIO2_REG(0x50)
+#define MSM_GPIO_INT_EDGE_2    MSM_GPIO1_REG(0x64)
+#define MSM_GPIO_INT_EDGE_3    MSM_GPIO1_REG(0x68)
+#define MSM_GPIO_INT_EDGE_4    MSM_GPIO1_REG(0x6C)
+#define MSM_GPIO_INT_EDGE_5    MSM_GPIO1_REG(0xC0)
+
+/* same pin map as above, 1=positive 0=negative */
+#define MSM_GPIO_INT_POS_0     MSM_GPIO1_REG(0x70)
+#define MSM_GPIO_INT_POS_1     MSM_GPIO2_REG(0x58)
+#define MSM_GPIO_INT_POS_2     MSM_GPIO1_REG(0x74)
+#define MSM_GPIO_INT_POS_3     MSM_GPIO1_REG(0x78)
+#define MSM_GPIO_INT_POS_4     MSM_GPIO1_REG(0x7C)
+#define MSM_GPIO_INT_POS_5     MSM_GPIO1_REG(0xBC)
+
+/* same pin map as above, interrupt enable */
+#define MSM_GPIO_INT_EN_0      MSM_GPIO1_REG(0x80)
+#define MSM_GPIO_INT_EN_1      MSM_GPIO2_REG(0x60)
+#define MSM_GPIO_INT_EN_2      MSM_GPIO1_REG(0x84)
+#define MSM_GPIO_INT_EN_3      MSM_GPIO1_REG(0x88)
+#define MSM_GPIO_INT_EN_4      MSM_GPIO1_REG(0x8C)
+#define MSM_GPIO_INT_EN_5      MSM_GPIO1_REG(0xB8)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define MSM_GPIO_INT_CLEAR_0   MSM_GPIO1_REG(0x90)
+#define MSM_GPIO_INT_CLEAR_1   MSM_GPIO2_REG(0x68)
+#define MSM_GPIO_INT_CLEAR_2   MSM_GPIO1_REG(0x94)
+#define MSM_GPIO_INT_CLEAR_3   MSM_GPIO1_REG(0x98)
+#define MSM_GPIO_INT_CLEAR_4   MSM_GPIO1_REG(0x9C)
+#define MSM_GPIO_INT_CLEAR_5   MSM_GPIO1_REG(0xB4)
+
+/* same pin map as above, 1=interrupt pending */
+#define MSM_GPIO_INT_STATUS_0  MSM_GPIO1_REG(0xA0)
+#define MSM_GPIO_INT_STATUS_1  MSM_GPIO2_REG(0x70)
+#define MSM_GPIO_INT_STATUS_2  MSM_GPIO1_REG(0xA4)
+#define MSM_GPIO_INT_STATUS_3  MSM_GPIO1_REG(0xA8)
+#define MSM_GPIO_INT_STATUS_4  MSM_GPIO1_REG(0xAC)
+#define MSM_GPIO_INT_STATUS_5  MSM_GPIO1_REG(0xB0)
+
+#endif
+
+#if defined(CONFIG_ARCH_QSD8X50)
+/* output value */
+#define MSM_GPIO_OUT_0         MSM_GPIO1_REG(0x00)  /* gpio  15-0   */
+#define MSM_GPIO_OUT_1         MSM_GPIO2_REG(0x00)  /* gpio  42-16  */
+#define MSM_GPIO_OUT_2         MSM_GPIO1_REG(0x04)  /* gpio  67-43  */
+#define MSM_GPIO_OUT_3         MSM_GPIO1_REG(0x08)  /* gpio  94-68  */
+#define MSM_GPIO_OUT_4         MSM_GPIO1_REG(0x0C)  /* gpio 103-95  */
+#define MSM_GPIO_OUT_5         MSM_GPIO1_REG(0x10)  /* gpio 121-104 */
+#define MSM_GPIO_OUT_6         MSM_GPIO1_REG(0x14)  /* gpio 152-122 */
+#define MSM_GPIO_OUT_7         MSM_GPIO1_REG(0x18)  /* gpio 164-153 */
+
+/* same pin map as above, output enable */
+#define MSM_GPIO_OE_0          MSM_GPIO1_REG(0x20)
+#define MSM_GPIO_OE_1          MSM_GPIO2_REG(0x08)
+#define MSM_GPIO_OE_2          MSM_GPIO1_REG(0x24)
+#define MSM_GPIO_OE_3          MSM_GPIO1_REG(0x28)
+#define MSM_GPIO_OE_4          MSM_GPIO1_REG(0x2C)
+#define MSM_GPIO_OE_5          MSM_GPIO1_REG(0x30)
+#define MSM_GPIO_OE_6          MSM_GPIO1_REG(0x34)
+#define MSM_GPIO_OE_7          MSM_GPIO1_REG(0x38)
+
+/* same pin map as above, input read */
+#define MSM_GPIO_IN_0          MSM_GPIO1_REG(0x50)
+#define MSM_GPIO_IN_1          MSM_GPIO2_REG(0x20)
+#define MSM_GPIO_IN_2          MSM_GPIO1_REG(0x54)
+#define MSM_GPIO_IN_3          MSM_GPIO1_REG(0x58)
+#define MSM_GPIO_IN_4          MSM_GPIO1_REG(0x5C)
+#define MSM_GPIO_IN_5          MSM_GPIO1_REG(0x60)
+#define MSM_GPIO_IN_6          MSM_GPIO1_REG(0x64)
+#define MSM_GPIO_IN_7          MSM_GPIO1_REG(0x68)
+
+/* same pin map as above, 1=edge 0=level interrup */
+#define MSM_GPIO_INT_EDGE_0    MSM_GPIO1_REG(0x70)
+#define MSM_GPIO_INT_EDGE_1    MSM_GPIO2_REG(0x50)
+#define MSM_GPIO_INT_EDGE_2    MSM_GPIO1_REG(0x74)
+#define MSM_GPIO_INT_EDGE_3    MSM_GPIO1_REG(0x78)
+#define MSM_GPIO_INT_EDGE_4    MSM_GPIO1_REG(0x7C)
+#define MSM_GPIO_INT_EDGE_5    MSM_GPIO1_REG(0x80)
+#define MSM_GPIO_INT_EDGE_6    MSM_GPIO1_REG(0x84)
+#define MSM_GPIO_INT_EDGE_7    MSM_GPIO1_REG(0x88)
+
+/* same pin map as above, 1=positive 0=negative */
+#define MSM_GPIO_INT_POS_0     MSM_GPIO1_REG(0x90)
+#define MSM_GPIO_INT_POS_1     MSM_GPIO2_REG(0x58)
+#define MSM_GPIO_INT_POS_2     MSM_GPIO1_REG(0x94)
+#define MSM_GPIO_INT_POS_3     MSM_GPIO1_REG(0x98)
+#define MSM_GPIO_INT_POS_4     MSM_GPIO1_REG(0x9C)
+#define MSM_GPIO_INT_POS_5     MSM_GPIO1_REG(0xA0)
+#define MSM_GPIO_INT_POS_6     MSM_GPIO1_REG(0xA4)
+#define MSM_GPIO_INT_POS_7     MSM_GPIO1_REG(0xA8)
+
+/* same pin map as above, interrupt enable */
+#define MSM_GPIO_INT_EN_0      MSM_GPIO1_REG(0xB0)
+#define MSM_GPIO_INT_EN_1      MSM_GPIO2_REG(0x60)
+#define MSM_GPIO_INT_EN_2      MSM_GPIO1_REG(0xB4)
+#define MSM_GPIO_INT_EN_3      MSM_GPIO1_REG(0xB8)
+#define MSM_GPIO_INT_EN_4      MSM_GPIO1_REG(0xBC)
+#define MSM_GPIO_INT_EN_5      MSM_GPIO1_REG(0xC0)
+#define MSM_GPIO_INT_EN_6      MSM_GPIO1_REG(0xC4)
+#define MSM_GPIO_INT_EN_7      MSM_GPIO1_REG(0xC8)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define MSM_GPIO_INT_CLEAR_0   MSM_GPIO1_REG(0xD0)
+#define MSM_GPIO_INT_CLEAR_1   MSM_GPIO2_REG(0x68)
+#define MSM_GPIO_INT_CLEAR_2   MSM_GPIO1_REG(0xD4)
+#define MSM_GPIO_INT_CLEAR_3   MSM_GPIO1_REG(0xD8)
+#define MSM_GPIO_INT_CLEAR_4   MSM_GPIO1_REG(0xDC)
+#define MSM_GPIO_INT_CLEAR_5   MSM_GPIO1_REG(0xE0)
+#define MSM_GPIO_INT_CLEAR_6   MSM_GPIO1_REG(0xE4)
+#define MSM_GPIO_INT_CLEAR_7   MSM_GPIO1_REG(0xE8)
+
+/* same pin map as above, 1=interrupt pending */
+#define MSM_GPIO_INT_STATUS_0  MSM_GPIO1_REG(0xF0)
+#define MSM_GPIO_INT_STATUS_1  MSM_GPIO2_REG(0x70)
+#define MSM_GPIO_INT_STATUS_2  MSM_GPIO1_REG(0xF4)
+#define MSM_GPIO_INT_STATUS_3  MSM_GPIO1_REG(0xF8)
+#define MSM_GPIO_INT_STATUS_4  MSM_GPIO1_REG(0xFC)
+#define MSM_GPIO_INT_STATUS_5  MSM_GPIO1_REG(0x100)
+#define MSM_GPIO_INT_STATUS_6  MSM_GPIO1_REG(0x104)
+#define MSM_GPIO_INT_STATUS_7  MSM_GPIO1_REG(0x108)
+
+#endif
+
+#if defined(CONFIG_ARCH_MSM7X30)
+
+/* output value */
+#define MSM_GPIO_OUT_0         MSM_GPIO1_REG(0x00)   /* gpio  15-0   */
+#define MSM_GPIO_OUT_1         MSM_GPIO2_REG(0x00)   /* gpio  43-16  */
+#define MSM_GPIO_OUT_2         MSM_GPIO1_REG(0x04)   /* gpio  67-44  */
+#define MSM_GPIO_OUT_3         MSM_GPIO1_REG(0x08)   /* gpio  94-68  */
+#define MSM_GPIO_OUT_4         MSM_GPIO1_REG(0x0C)   /* gpio 106-95  */
+#define MSM_GPIO_OUT_5         MSM_GPIO1_REG(0x50)   /* gpio 133-107 */
+#define MSM_GPIO_OUT_6         MSM_GPIO1_REG(0xC4)   /* gpio 150-134 */
+#define MSM_GPIO_OUT_7         MSM_GPIO1_REG(0x214)  /* gpio 181-151 */
+
+/* same pin map as above, output enable */
+#define MSM_GPIO_OE_0          MSM_GPIO1_REG(0x10)
+#define MSM_GPIO_OE_1          MSM_GPIO2_REG(0x08)
+#define MSM_GPIO_OE_2          MSM_GPIO1_REG(0x14)
+#define MSM_GPIO_OE_3          MSM_GPIO1_REG(0x18)
+#define MSM_GPIO_OE_4          MSM_GPIO1_REG(0x1C)
+#define MSM_GPIO_OE_5          MSM_GPIO1_REG(0x54)
+#define MSM_GPIO_OE_6          MSM_GPIO1_REG(0xC8)
+#define MSM_GPIO_OE_7          MSM_GPIO1_REG(0x218)
+
+/* same pin map as above, input read */
+#define MSM_GPIO_IN_0          MSM_GPIO1_REG(0x34)
+#define MSM_GPIO_IN_1          MSM_GPIO2_REG(0x20)
+#define MSM_GPIO_IN_2          MSM_GPIO1_REG(0x38)
+#define MSM_GPIO_IN_3          MSM_GPIO1_REG(0x3C)
+#define MSM_GPIO_IN_4          MSM_GPIO1_REG(0x40)
+#define MSM_GPIO_IN_5          MSM_GPIO1_REG(0x44)
+#define MSM_GPIO_IN_6          MSM_GPIO1_REG(0xCC)
+#define MSM_GPIO_IN_7          MSM_GPIO1_REG(0x21C)
+
+/* same pin map as above, 1=edge 0=level interrup */
+#define MSM_GPIO_INT_EDGE_0    MSM_GPIO1_REG(0x60)
+#define MSM_GPIO_INT_EDGE_1    MSM_GPIO2_REG(0x50)
+#define MSM_GPIO_INT_EDGE_2    MSM_GPIO1_REG(0x64)
+#define MSM_GPIO_INT_EDGE_3    MSM_GPIO1_REG(0x68)
+#define MSM_GPIO_INT_EDGE_4    MSM_GPIO1_REG(0x6C)
+#define MSM_GPIO_INT_EDGE_5    MSM_GPIO1_REG(0xC0)
+#define MSM_GPIO_INT_EDGE_6    MSM_GPIO1_REG(0xD0)
+#define MSM_GPIO_INT_EDGE_7    MSM_GPIO1_REG(0x240)
+
+/* same pin map as above, 1=positive 0=negative */
+#define MSM_GPIO_INT_POS_0     MSM_GPIO1_REG(0x70)
+#define MSM_GPIO_INT_POS_1     MSM_GPIO2_REG(0x58)
+#define MSM_GPIO_INT_POS_2     MSM_GPIO1_REG(0x74)
+#define MSM_GPIO_INT_POS_3     MSM_GPIO1_REG(0x78)
+#define MSM_GPIO_INT_POS_4     MSM_GPIO1_REG(0x7C)
+#define MSM_GPIO_INT_POS_5     MSM_GPIO1_REG(0xBC)
+#define MSM_GPIO_INT_POS_6     MSM_GPIO1_REG(0xD4)
+#define MSM_GPIO_INT_POS_7     MSM_GPIO1_REG(0x228)
+
+/* same pin map as above, interrupt enable */
+#define MSM_GPIO_INT_EN_0      MSM_GPIO1_REG(0x80)
+#define MSM_GPIO_INT_EN_1      MSM_GPIO2_REG(0x60)
+#define MSM_GPIO_INT_EN_2      MSM_GPIO1_REG(0x84)
+#define MSM_GPIO_INT_EN_3      MSM_GPIO1_REG(0x88)
+#define MSM_GPIO_INT_EN_4      MSM_GPIO1_REG(0x8C)
+#define MSM_GPIO_INT_EN_5      MSM_GPIO1_REG(0xB8)
+#define MSM_GPIO_INT_EN_6      MSM_GPIO1_REG(0xD8)
+#define MSM_GPIO_INT_EN_7      MSM_GPIO1_REG(0x22C)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define MSM_GPIO_INT_CLEAR_0   MSM_GPIO1_REG(0x90)
+#define MSM_GPIO_INT_CLEAR_1   MSM_GPIO2_REG(0x68)
+#define MSM_GPIO_INT_CLEAR_2   MSM_GPIO1_REG(0x94)
+#define MSM_GPIO_INT_CLEAR_3   MSM_GPIO1_REG(0x98)
+#define MSM_GPIO_INT_CLEAR_4   MSM_GPIO1_REG(0x9C)
+#define MSM_GPIO_INT_CLEAR_5   MSM_GPIO1_REG(0xB4)
+#define MSM_GPIO_INT_CLEAR_6   MSM_GPIO1_REG(0xDC)
+#define MSM_GPIO_INT_CLEAR_7   MSM_GPIO1_REG(0x230)
+
+/* same pin map as above, 1=interrupt pending */
+#define MSM_GPIO_INT_STATUS_0  MSM_GPIO1_REG(0xA0)
+#define MSM_GPIO_INT_STATUS_1  MSM_GPIO2_REG(0x70)
+#define MSM_GPIO_INT_STATUS_2  MSM_GPIO1_REG(0xA4)
+#define MSM_GPIO_INT_STATUS_3  MSM_GPIO1_REG(0xA8)
+#define MSM_GPIO_INT_STATUS_4  MSM_GPIO1_REG(0xAC)
+#define MSM_GPIO_INT_STATUS_5  MSM_GPIO1_REG(0xB0)
+#define MSM_GPIO_INT_STATUS_6  MSM_GPIO1_REG(0xE0)
+#define MSM_GPIO_INT_STATUS_7  MSM_GPIO1_REG(0x234)
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-msm/gpiomux-7x30.c b/arch/arm/mach-msm/gpiomux-7x30.c
new file mode 100644
index 000000000000..6ce41c5241a5
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-7x30.c
@@ -0,0 +1,38 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include "gpiomux.h"
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+	[49] = { /* UART2 RFR */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+	[50] = { /* UART2 CTS */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+	[51] = { /* UART2 RX */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+	[52] = { /* UART2 TX */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_2 | GPIOMUX_VALID,
+	},
+#endif
+};
diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c
new file mode 100644
index 000000000000..4406e0f4ae95
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-8x50.c
@@ -0,0 +1,28 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include "gpiomux.h"
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
+	[86] = { /* UART3 RX */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_1 | GPIOMUX_VALID,
+	},
+	[87] = { /* UART3 TX */
+		.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
+			     GPIOMUX_FUNC_1 | GPIOMUX_VALID,
+	},
+};
diff --git a/arch/arm/mach-msm/gpiomux-8x60.c b/arch/arm/mach-msm/gpiomux-8x60.c
new file mode 100644
index 000000000000..7b380b31bd0e
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-8x60.c
@@ -0,0 +1,19 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include "gpiomux.h"
+
+struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {};
diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c
new file mode 100644
index 000000000000..27de2abd7144
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v1.c
@@ -0,0 +1,33 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/kernel.h>
+#include "gpiomux.h"
+#include "proc_comm.h"
+
+void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
+{
+	unsigned tlmm_config  = (val & ~GPIOMUX_CTL_MASK) |
+				((gpio & 0x3ff) << 4);
+	unsigned tlmm_disable = 0;
+	int rc;
+
+	rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX,
+			   &tlmm_config, &tlmm_disable);
+	if (rc)
+		pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n",
+		       __func__, rc, tlmm_config, tlmm_disable);
+}
diff --git a/arch/arm/mach-msm/gpiomux-v1.h b/arch/arm/mach-msm/gpiomux-v1.h
new file mode 100644
index 000000000000..71d86feba450
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v1.h
@@ -0,0 +1,67 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
+#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define GPIOMUX_NGPIOS 182
+#elif defined(CONFIG_ARCH_QSD8X50)
+#define GPIOMUX_NGPIOS 165
+#else
+#define GPIOMUX_NGPIOS 133
+#endif
+
+typedef u32 gpiomux_config_t;
+
+enum {
+	GPIOMUX_DRV_2MA  = 0UL << 17,
+	GPIOMUX_DRV_4MA  = 1UL << 17,
+	GPIOMUX_DRV_6MA  = 2UL << 17,
+	GPIOMUX_DRV_8MA  = 3UL << 17,
+	GPIOMUX_DRV_10MA = 4UL << 17,
+	GPIOMUX_DRV_12MA = 5UL << 17,
+	GPIOMUX_DRV_14MA = 6UL << 17,
+	GPIOMUX_DRV_16MA = 7UL << 17,
+};
+
+enum {
+	GPIOMUX_FUNC_GPIO = 0UL,
+	GPIOMUX_FUNC_1    = 1UL,
+	GPIOMUX_FUNC_2    = 2UL,
+	GPIOMUX_FUNC_3    = 3UL,
+	GPIOMUX_FUNC_4    = 4UL,
+	GPIOMUX_FUNC_5    = 5UL,
+	GPIOMUX_FUNC_6    = 6UL,
+	GPIOMUX_FUNC_7    = 7UL,
+	GPIOMUX_FUNC_8    = 8UL,
+	GPIOMUX_FUNC_9    = 9UL,
+	GPIOMUX_FUNC_A    = 10UL,
+	GPIOMUX_FUNC_B    = 11UL,
+	GPIOMUX_FUNC_C    = 12UL,
+	GPIOMUX_FUNC_D    = 13UL,
+	GPIOMUX_FUNC_E    = 14UL,
+	GPIOMUX_FUNC_F    = 15UL,
+};
+
+enum {
+	GPIOMUX_PULL_NONE   = 0UL << 15,
+	GPIOMUX_PULL_DOWN   = 1UL << 15,
+	GPIOMUX_PULL_KEEPER = 2UL << 15,
+	GPIOMUX_PULL_UP     = 3UL << 15,
+};
+
+#endif
diff --git a/arch/arm/mach-msm/gpiomux-v2.c b/arch/arm/mach-msm/gpiomux-v2.c
new file mode 100644
index 000000000000..273396d2b127
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v2.c
@@ -0,0 +1,25 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/io.h>
+#include <mach/msm_iomap.h>
+#include "gpiomux.h"
+
+void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
+{
+	writel(val & ~GPIOMUX_CTL_MASK,
+	       MSM_TLMM_BASE + 0x1000 + (0x10 * gpio));
+}
diff --git a/arch/arm/mach-msm/gpiomux-v2.h b/arch/arm/mach-msm/gpiomux-v2.h
new file mode 100644
index 000000000000..3bf10e7f0381
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux-v2.h
@@ -0,0 +1,61 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H
+#define __ARCH_ARM_MACH_MSM_GPIOMUX_V2_H
+
+#define GPIOMUX_NGPIOS 173
+
+typedef u16 gpiomux_config_t;
+
+enum {
+	GPIOMUX_DRV_2MA  = 0UL << 6,
+	GPIOMUX_DRV_4MA  = 1UL << 6,
+	GPIOMUX_DRV_6MA  = 2UL << 6,
+	GPIOMUX_DRV_8MA  = 3UL << 6,
+	GPIOMUX_DRV_10MA = 4UL << 6,
+	GPIOMUX_DRV_12MA = 5UL << 6,
+	GPIOMUX_DRV_14MA = 6UL << 6,
+	GPIOMUX_DRV_16MA = 7UL << 6,
+};
+
+enum {
+	GPIOMUX_FUNC_GPIO = 0UL  << 2,
+	GPIOMUX_FUNC_1    = 1UL  << 2,
+	GPIOMUX_FUNC_2    = 2UL  << 2,
+	GPIOMUX_FUNC_3    = 3UL  << 2,
+	GPIOMUX_FUNC_4    = 4UL  << 2,
+	GPIOMUX_FUNC_5    = 5UL  << 2,
+	GPIOMUX_FUNC_6    = 6UL  << 2,
+	GPIOMUX_FUNC_7    = 7UL  << 2,
+	GPIOMUX_FUNC_8    = 8UL  << 2,
+	GPIOMUX_FUNC_9    = 9UL  << 2,
+	GPIOMUX_FUNC_A    = 10UL << 2,
+	GPIOMUX_FUNC_B    = 11UL << 2,
+	GPIOMUX_FUNC_C    = 12UL << 2,
+	GPIOMUX_FUNC_D    = 13UL << 2,
+	GPIOMUX_FUNC_E    = 14UL << 2,
+	GPIOMUX_FUNC_F    = 15UL << 2,
+};
+
+enum {
+	GPIOMUX_PULL_NONE   = 0UL,
+	GPIOMUX_PULL_DOWN   = 1UL,
+	GPIOMUX_PULL_KEEPER = 2UL,
+	GPIOMUX_PULL_UP     = 3UL,
+};
+
+#endif
diff --git a/arch/arm/mach-msm/gpiomux.c b/arch/arm/mach-msm/gpiomux.c
new file mode 100644
index 000000000000..53af21abd155
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux.c
@@ -0,0 +1,96 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include "gpiomux.h"
+
+static DEFINE_SPINLOCK(gpiomux_lock);
+
+int msm_gpiomux_write(unsigned gpio,
+		      gpiomux_config_t active,
+		      gpiomux_config_t suspended)
+{
+	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
+	unsigned long irq_flags;
+	gpiomux_config_t setting;
+
+	if (gpio >= GPIOMUX_NGPIOS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&gpiomux_lock, irq_flags);
+
+	if (active & GPIOMUX_VALID)
+		cfg->active = active;
+
+	if (suspended & GPIOMUX_VALID)
+		cfg->suspended = suspended;
+
+	setting = cfg->ref ? active : suspended;
+	if (setting & GPIOMUX_VALID)
+		__msm_gpiomux_write(gpio, setting);
+
+	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
+	return 0;
+}
+EXPORT_SYMBOL(msm_gpiomux_write);
+
+int msm_gpiomux_get(unsigned gpio)
+{
+	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
+	unsigned long irq_flags;
+
+	if (gpio >= GPIOMUX_NGPIOS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&gpiomux_lock, irq_flags);
+	if (cfg->ref++ == 0 && cfg->active & GPIOMUX_VALID)
+		__msm_gpiomux_write(gpio, cfg->active);
+	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
+	return 0;
+}
+EXPORT_SYMBOL(msm_gpiomux_get);
+
+int msm_gpiomux_put(unsigned gpio)
+{
+	struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
+	unsigned long irq_flags;
+
+	if (gpio >= GPIOMUX_NGPIOS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&gpiomux_lock, irq_flags);
+	BUG_ON(cfg->ref == 0);
+	if (--cfg->ref == 0 && cfg->suspended & GPIOMUX_VALID)
+		__msm_gpiomux_write(gpio, cfg->suspended);
+	spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
+	return 0;
+}
+EXPORT_SYMBOL(msm_gpiomux_put);
+
+static int __init gpiomux_init(void)
+{
+	unsigned n;
+
+	for (n = 0; n < GPIOMUX_NGPIOS; ++n) {
+		msm_gpiomux_configs[n].ref = 0;
+		if (!(msm_gpiomux_configs[n].suspended & GPIOMUX_VALID))
+			continue;
+		__msm_gpiomux_write(n, msm_gpiomux_configs[n].suspended);
+	}
+	return 0;
+}
+postcore_initcall(gpiomux_init);
diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h
new file mode 100644
index 000000000000..b178d9cb742f
--- /dev/null
+++ b/arch/arm/mach-msm/gpiomux.h
@@ -0,0 +1,114 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H
+#define __ARCH_ARM_MACH_MSM_GPIOMUX_H
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+
+#if defined(CONFIG_MSM_V2_TLMM)
+#include "gpiomux-v2.h"
+#else
+#include "gpiomux-v1.h"
+#endif
+
+/**
+ * struct msm_gpiomux_config: gpiomux settings for one gpio line.
+ *
+ * A complete gpiomux config is the bitwise-or of a drive-strength,
+ * function, and pull.  For functions other than GPIO, the OE
+ * is hard-wired according to the function.  For GPIO mode,
+ * OE is controlled by gpiolib.
+ *
+ * Available settings differ by target; see the gpiomux header
+ * specific to your target arch for available configurations.
+ *
+ * @active: The configuration to be installed when the line is
+ * active, or its reference count is > 0.
+ * @suspended: The configuration to be installed when the line
+ * is suspended, or its reference count is 0.
+ * @ref: The reference count of the line.  For internal use of
+ * the gpiomux framework only.
+ */
+struct msm_gpiomux_config {
+	gpiomux_config_t active;
+	gpiomux_config_t suspended;
+	unsigned         ref;
+};
+
+/**
+ * @GPIOMUX_VALID:	If set, the config field contains 'good data'.
+ *                      The absence of this bit will prevent the gpiomux
+ *			system from applying the configuration under all
+ *			circumstances.
+ */
+enum {
+	GPIOMUX_VALID	 = BIT(sizeof(gpiomux_config_t) * BITS_PER_BYTE - 1),
+	GPIOMUX_CTL_MASK = GPIOMUX_VALID,
+};
+
+#ifdef CONFIG_MSM_GPIOMUX
+
+/* Each architecture must provide its own instance of this table.
+ * To avoid having gpiomux manage any given gpio, one or both of
+ * the entries can avoid setting GPIOMUX_VALID - the absence
+ * of that flag will prevent the configuration from being applied
+ * during state transitions.
+ */
+extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
+
+/* Increment a gpio's reference count, possibly activating the line. */
+int __must_check msm_gpiomux_get(unsigned gpio);
+
+/* Decrement a gpio's reference count, possibly suspending the line. */
+int msm_gpiomux_put(unsigned gpio);
+
+/* Install a new configuration to the gpio line.  To avoid overwriting
+ * a configuration, leave the VALID bit out.
+ */
+int msm_gpiomux_write(unsigned gpio,
+		      gpiomux_config_t active,
+		      gpiomux_config_t suspended);
+
+/* Architecture-internal function for use by the framework only.
+ * This function can assume the following:
+ * - the gpio value has passed a bounds-check
+ * - the gpiomux spinlock has been obtained
+ *
+ * This function is not for public consumption.  External users
+ * should use msm_gpiomux_write.
+ */
+void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val);
+#else
+static inline int __must_check msm_gpiomux_get(unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int msm_gpiomux_put(unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int msm_gpiomux_write(unsigned gpio,
+				    gpiomux_config_t active,
+				    gpiomux_config_t suspended)
+{
+	return -ENOSYS;
+}
+#endif
+#endif
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
index e302fbdc439b..6abf4a6eadc1 100644
--- a/arch/arm/mach-msm/include/mach/board.h
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -18,6 +18,7 @@
 #define __ASM_ARCH_MSM_BOARD_H
 
 #include <linux/types.h>
+#include <mach/mmc.h>
 
 /* platform device data structures */
 
@@ -32,6 +33,8 @@ struct msm_acpu_clock_platform_data
 
 struct clk;
 
+extern struct sys_timer msm_timer;
+
 /* common init routines for use by arch/arm/mach-msm/board-*.c */
 
 void __init msm_add_devices(void);
@@ -40,5 +43,8 @@ void __init msm_init_irq(void);
 void __init msm_init_gpio(void);
 void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks);
 void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *);
+int __init msm_add_sdcc(unsigned int controller,
+			struct msm_mmc_platform_data *plat,
+			unsigned int stat_irq, unsigned long stat_irq_flags);
 
 #endif
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 528750f307e9..646b99ebc773 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -19,13 +19,10 @@
 #include <mach/hardware.h>
 #include <mach/msm_iomap.h>
 
-#ifdef CONFIG_MSM_DEBUG_UART
-	.macro	addruart, rx, tmp
-	@ see if the MMU is enabled and select appropriate base address
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1
-	ldreq	\rx, =MSM_DEBUG_UART_PHYS
-	ldrne	\rx, =MSM_DEBUG_UART_BASE
+#if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
+	.macro	addruart, rp, rv
+	ldr	\rp, =MSM_DEBUG_UART_PHYS
+	ldr	\rv, =MSM_DEBUG_UART_BASE
 	.endm
 
 	.macro	senduart,rd,rx
@@ -40,7 +37,9 @@
 	beq	1001b
 	.endm
 #else
-	.macro	addruart, rx, tmp
+	.macro  addruart, rp, rv
+	mov	\rv, #0xff000000
+	orr	\rv, \rv, #0x00f00000
 	.endm
 
 	.macro	senduart,rd,rx
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
index 00f9bbfadbe6..05583f569524 100644
--- a/arch/arm/mach-msm/include/mach/dma.h
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -32,10 +32,18 @@ struct msm_dmov_cmd {
 	void *data;
 };
 
+#ifndef CONFIG_ARCH_MSM8X60
 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
 void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful);
 int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-
+#else
+static inline
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { }
+static inline
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { }
+static inline
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; }
+#endif
 
 
 #define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
new file mode 100644
index 000000000000..4dc99aa65d07
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -0,0 +1,88 @@
+/*
+ * Low-level IRQ helper macros
+ *
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =gic_cpu_base_addr
+	ldr	\base, [\base]
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	/*
+	 * The interrupt numbering scheme is defined in the
+	 * interrupt controller spec.  To wit:
+	 *
+	 * Migrated the code from ARM MP port to be more consistant
+	 * with interrupt processing , the following still holds true
+	 * however, all interrupts are treated the same regardless of
+	 * if they are local IPI or PPI
+	 *
+	 * Interrupts 0-15 are IPI
+	 * 16-31 are PPI
+	 *   (16-18 are the timers)
+	 * 32-1020 are global
+	 * 1021-1022 are reserved
+	 * 1023 is "spurious" (no interrupt)
+	 *
+	 * A simple read from the controller will tell us the number of the
+	 * highest priority enabled interrupt.  We then just need to check
+	 * whether it is in the valid range for an IRQ (0-1020 inclusive).
+	 *
+	 * Base ARM code assumes that the local (private) peripheral interrupts
+	 * are not valid, we treat them differently, in that the privates are
+	 * handled like normal shared interrupts with the exception that only
+	 * one processor can register the interrupt and the handler must be
+	 * the same for all processors.
+	 */
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	ldr  \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
+						   9-0 =int # */
+
+	bic     \irqnr, \irqstat, #0x1c00	@mask src
+	cmp     \irqnr, #15
+	ldr		\tmp, =1021
+	cmpcc	\irqnr, \irqnr
+	cmpne	\irqnr, \tmp
+	cmpcs	\irqnr, \irqnr
+
+	.endm
+
+	/* We assume that irqstat (the raw value of the IRQ acknowledge
+	 * register) is preserved from the macro above.
+	 * If there is an IPI, we immediately signal end of interrupt on the
+	 * controller, since this requires the original irqstat value which
+	 * we won't easily be able to recreate later.
+	 */
+	.macro test_for_ipi, irqnr, irqstat, base, tmp
+    bic \irqnr, \irqstat, #0x1c00
+    cmp \irqnr, #16
+    strcc   \irqstat, [\base, #GIC_CPU_EOI]
+    cmpcs   \irqnr, \irqnr
+	.endm
+
+	/* As above, this assumes that irqstat and base are preserved.. */
+
+	.macro test_for_ltirq, irqnr, irqstat, base, tmp
+    bic \irqnr, \irqstat, #0x1c00
+    mov     \tmp, #0
+    cmp \irqnr, #16
+    moveq   \tmp, #1
+    streq   \irqstat, [\base, #GIC_CPU_EOI]
+    cmp \tmp, #0
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-vic.S b/arch/arm/mach-msm/include/mach/entry-macro-vic.S
new file mode 100644
index 000000000000..70563ed11b36
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro-vic.S
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/msm_iomap.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	@ enable imprecise aborts
+	cpsie	a
+	mov	\base, #MSM_VIC_BASE
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ 0xD0 has irq# or old irq# if the irq has been handled
+	@ 0xD4 has irq# or -1 if none pending *but* if you just
+	@ read 0xD4 you never get the first irq for some reason
+	ldr	\irqnr, [\base, #0xD0]
+	ldr	\irqnr, [\base, #0xD4]
+	cmp	\irqnr, #0xffffffff
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
index d2259486bcb1..b16f082eeb6f 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -1,38 +1,23 @@
-/* arch/arm/mach-msm7200/include/mach/entry-macro.S
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
  *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
  */
 
-#include <mach/msm_iomap.h>
-
- 	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	@ enable imprecise aborts
-	cpsie	a
-	mov	\base, #MSM_VIC_BASE
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ 0xD0 has irq# or old irq# if the irq has been handled
-	@ 0xD4 has irq# or -1 if none pending *but* if you just
-	@ read 0xD4 you never get the first irq for some reason
-	ldr	\irqnr, [\base, #0xD0]
-	ldr	\irqnr, [\base, #0xD4]
-	cmp	\irqnr, #0xffffffff
-	.endm
+#if defined(CONFIG_ARM_GIC)
+#include <mach/entry-macro-qgic.S>
+#else
+#include <mach/entry-macro-vic.S>
+#endif
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
index 262b441b4374..36ad50d3bfaa 100644
--- a/arch/arm/mach-msm/include/mach/gpio.h
+++ b/arch/arm/mach-msm/include/mach/gpio.h
@@ -16,127 +16,11 @@
 #ifndef __ASM_ARCH_MSM_GPIO_H
 #define __ASM_ARCH_MSM_GPIO_H
 
-/**
- * struct msm_gpio - GPIO pin description
- * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config()
- * @label - textual label
- *
- * Usually, GPIO's are operated by sets.
- * This struct accumulate all GPIO information in single source
- * and facilitete group operations provided by msm_gpios_xxx()
- */
-struct msm_gpio {
-	u32 gpio_cfg;
-	const char *label;
-};
-
-/**
- * msm_gpios_request_enable() - request and enable set of GPIOs
- *
- * Request and configure set of GPIO's
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-int msm_gpios_request_enable(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_disable_free() - disable and free set of GPIOs
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-void msm_gpios_disable_free(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_request() - request set of GPIOs
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-int msm_gpios_request(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_free() - free set of GPIOs
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-void msm_gpios_free(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_enable() - enable set of GPIOs
- * In case of error, all operations rolled back.
- * Return error code.
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-int msm_gpios_enable(const struct msm_gpio *table, int size);
-
-/**
- * msm_gpios_disable() - disable set of GPIOs
- *
- * @table: GPIO table
- * @size:  number of entries in @table
- */
-void msm_gpios_disable(const struct msm_gpio *table, int size);
-
-/* GPIO TLMM (Top Level Multiplexing) Definitions */
-
-/* GPIO TLMM: Function -- GPIO specific */
-
-/* GPIO TLMM: Direction */
-enum {
-	GPIO_INPUT,
-	GPIO_OUTPUT,
-};
-
-/* GPIO TLMM: Pullup/Pulldown */
-enum {
-	GPIO_NO_PULL,
-	GPIO_PULL_DOWN,
-	GPIO_KEEPER,
-	GPIO_PULL_UP,
-};
-
-/* GPIO TLMM: Drive Strength */
-enum {
-	GPIO_2MA,
-	GPIO_4MA,
-	GPIO_6MA,
-	GPIO_8MA,
-	GPIO_10MA,
-	GPIO_12MA,
-	GPIO_14MA,
-	GPIO_16MA,
-};
-
-enum {
-	GPIO_ENABLE,
-	GPIO_DISABLE,
-};
-
-#define GPIO_CFG(gpio, func, dir, pull, drvstr) \
-	((((gpio) & 0x3FF) << 4)        |	  \
-	 ((func) & 0xf)                  |	  \
-	 (((dir) & 0x1) << 14)           |	  \
-	 (((pull) & 0x3) << 15)          |	  \
-	 (((drvstr) & 0xF) << 17))
-
-/**
- * extract GPIO pin from bit-field used for gpio_tlmm_config
- */
-#define GPIO_PIN(gpio_cfg)    (((gpio_cfg) >>  4) & 0x3ff)
-#define GPIO_FUNC(gpio_cfg)   (((gpio_cfg) >>  0) & 0xf)
-#define GPIO_DIR(gpio_cfg)    (((gpio_cfg) >> 14) & 0x1)
-#define GPIO_PULL(gpio_cfg)   (((gpio_cfg) >> 15) & 0x3)
-#define GPIO_DRVSTR(gpio_cfg) (((gpio_cfg) >> 17) & 0xf)
+#include <asm-generic/gpio.h>
 
-int gpio_tlmm_config(unsigned config, unsigned disable);
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
 
 #endif /* __ASM_ARCH_MSM_GPIO_H */
diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h
index c35b29f9ac0f..7386e732baad 100644
--- a/arch/arm/mach-msm/include/mach/io.h
+++ b/arch/arm/mach-msm/include/mach/io.h
@@ -28,6 +28,7 @@ void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int m
 
 void msm_map_qsd8x50_io(void);
 void msm_map_msm7x30_io(void);
+void msm_map_msm8x60_io(void);
 
 extern unsigned int msm_shared_ram_phys;
 
diff --git a/arch/arm/mach-msm/include/mach/iommu.h b/arch/arm/mach-msm/include/mach/iommu.h
new file mode 100644
index 000000000000..218ef5732a24
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/iommu.h
@@ -0,0 +1,103 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef MSM_IOMMU_H
+#define MSM_IOMMU_H
+
+#include <linux/interrupt.h>
+
+/* Maximum number of Machine IDs that we are allowing to be mapped to the same
+ * context bank. The number of MIDs mapped to the same CB does not affect
+ * performance, but there is a practical limit on how many distinct MIDs may
+ * be present. These mappings are typically determined at design time and are
+ * not expected to change at run time.
+ */
+#define MAX_NUM_MIDS	16
+
+/**
+ * struct msm_iommu_dev - a single IOMMU hardware instance
+ * name		Human-readable name given to this IOMMU HW instance
+ * clk_rate	Rate to set for this IOMMU's clock, if applicable to this
+ *		particular IOMMU. 0 means don't set a rate.
+ *		-1 means it is an AXI clock with no valid rate
+ *
+ */
+struct msm_iommu_dev {
+	const char *name;
+	int clk_rate;
+};
+
+/**
+ * struct msm_iommu_ctx_dev - an IOMMU context bank instance
+ * name		Human-readable name given to this context bank
+ * num		Index of this context bank within the hardware
+ * mids		List of Machine IDs that are to be mapped into this context
+ *		bank, terminated by -1. The MID is a set of signals on the
+ *		AXI bus that identifies the function associated with a specific
+ *		memory request. (See ARM spec).
+ */
+struct msm_iommu_ctx_dev {
+	const char *name;
+	int num;
+	int mids[MAX_NUM_MIDS];
+};
+
+
+/**
+ * struct msm_iommu_drvdata - A single IOMMU hardware instance
+ * @base:	IOMMU config port base address (VA)
+ * @irq:	Interrupt number
+  *
+ * A msm_iommu_drvdata holds the global driver data about a single piece
+ * of an IOMMU hardware instance.
+ */
+struct msm_iommu_drvdata {
+	void __iomem *base;
+	int irq;
+};
+
+/**
+ * struct msm_iommu_ctx_drvdata - an IOMMU context bank instance
+ * @num:		Hardware context number of this context
+ * @pdev:		Platform device associated wit this HW instance
+ * @attached_elm:	List element for domains to track which devices are
+ *			attached to them
+ *
+ * A msm_iommu_ctx_drvdata holds the driver data for a single context bank
+ * within each IOMMU hardware instance
+ */
+struct msm_iommu_ctx_drvdata {
+	int num;
+	struct platform_device *pdev;
+	struct list_head attached_elm;
+};
+
+/*
+ * Look up an IOMMU context device by its context name. NULL if none found.
+ * Useful for testing and drivers that do not yet fully have IOMMU stuff in
+ * their platform devices.
+ */
+struct device *msm_iommu_get_ctx(const char *ctx_name);
+
+/*
+ * Interrupt handler for the IOMMU context fault interrupt. Hooking the
+ * interrupt is not supported in the API yet, but this will print an error
+ * message and dump useful IOMMU registers.
+ */
+irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id);
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
new file mode 100644
index 000000000000..f9386d3a2f77
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
@@ -0,0 +1,1871 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
+#define __ARCH_ARM_MACH_MSM_IOMMU_HW_8XXX_H
+
+#define CTX_SHIFT 12
+
+#define GET_GLOBAL_REG(reg, base) (readl((base) + (reg)))
+#define GET_CTX_REG(reg, base, ctx) \
+				(readl((base) + (reg) + ((ctx) << CTX_SHIFT)))
+
+#define SET_GLOBAL_REG(reg, base, val)	writel((val), ((base) + (reg)))
+
+#define SET_CTX_REG(reg, base, ctx, val) \
+			writel((val), ((base) + (reg) + ((ctx) << CTX_SHIFT)))
+
+/* Wrappers for numbered registers */
+#define SET_GLOBAL_REG_N(b, n, r, v) SET_GLOBAL_REG(b, ((r) + (n << 2)), (v))
+#define GET_GLOBAL_REG_N(b, n, r)    GET_GLOBAL_REG(b, ((r) + (n << 2)))
+
+/* Field wrappers */
+#define GET_GLOBAL_FIELD(b, r, F)    GET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT)
+#define GET_CONTEXT_FIELD(b, c, r, F)	\
+	GET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT)
+
+#define SET_GLOBAL_FIELD(b, r, F, v) \
+	SET_FIELD(((b) + (r)), F##_MASK, F##_SHIFT, (v))
+#define SET_CONTEXT_FIELD(b, c, r, F, v)	\
+	SET_FIELD(((b) + (r) + ((c) << CTX_SHIFT)), F##_MASK, F##_SHIFT, (v))
+
+#define GET_FIELD(addr, mask, shift)  ((readl(addr) >> (shift)) & (mask))
+
+#define SET_FIELD(addr, mask, shift, v) \
+do { \
+	int t = readl(addr); \
+	writel((t & ~((mask) << (shift))) + (((v) & (mask)) << (shift)), addr);\
+} while (0)
+
+
+#define NUM_FL_PTE	4096
+#define NUM_SL_PTE	256
+
+/* First-level page table bits */
+#define FL_BASE_MASK		0xFFFFFC00
+#define FL_TYPE_TABLE		(1 << 0)
+#define FL_TYPE_SECT		(2 << 0)
+#define FL_SUPERSECTION		(1 << 18)
+#define FL_AP_WRITE		(1 << 10)
+#define FL_AP_READ		(1 << 11)
+#define FL_SHARED		(1 << 16)
+#define FL_OFFSET(va)		(((va) & 0xFFF00000) >> 20)
+
+/* Second-level page table bits */
+#define SL_BASE_MASK_LARGE	0xFFFF0000
+#define SL_BASE_MASK_SMALL	0xFFFFF000
+#define SL_TYPE_LARGE		(1 << 0)
+#define SL_TYPE_SMALL		(2 << 0)
+#define SL_AP0			(1 << 4)
+#define SL_AP1			(2 << 4)
+#define SL_SHARED		(1 << 10)
+#define SL_OFFSET(va)		(((va) & 0xFF000) >> 12)
+
+/* Global register setters / getters */
+#define SET_M2VCBR_N(b, N, v)	 SET_GLOBAL_REG_N(M2VCBR_N, N, (b), (v))
+#define SET_CBACR_N(b, N, v)	 SET_GLOBAL_REG_N(CBACR_N, N, (b), (v))
+#define SET_TLBRSW(b, v)	 SET_GLOBAL_REG(TLBRSW, (b), (v))
+#define SET_TLBTR0(b, v)	 SET_GLOBAL_REG(TLBTR0, (b), (v))
+#define SET_TLBTR1(b, v)	 SET_GLOBAL_REG(TLBTR1, (b), (v))
+#define SET_TLBTR2(b, v)	 SET_GLOBAL_REG(TLBTR2, (b), (v))
+#define SET_TESTBUSCR(b, v)	 SET_GLOBAL_REG(TESTBUSCR, (b), (v))
+#define SET_GLOBAL_TLBIALL(b, v) SET_GLOBAL_REG(GLOBAL_TLBIALL, (b), (v))
+#define SET_TLBIVMID(b, v)	 SET_GLOBAL_REG(TLBIVMID, (b), (v))
+#define SET_CR(b, v)		 SET_GLOBAL_REG(CR, (b), (v))
+#define SET_EAR(b, v)		 SET_GLOBAL_REG(EAR, (b), (v))
+#define SET_ESR(b, v)		 SET_GLOBAL_REG(ESR, (b), (v))
+#define SET_ESRRESTORE(b, v)	 SET_GLOBAL_REG(ESRRESTORE, (b), (v))
+#define SET_ESYNR0(b, v)	 SET_GLOBAL_REG(ESYNR0, (b), (v))
+#define SET_ESYNR1(b, v)	 SET_GLOBAL_REG(ESYNR1, (b), (v))
+#define SET_RPU_ACR(b, v)	 SET_GLOBAL_REG(RPU_ACR, (b), (v))
+
+#define GET_M2VCBR_N(b, N)	 GET_GLOBAL_REG_N(M2VCBR_N, N, (b))
+#define GET_CBACR_N(b, N)	 GET_GLOBAL_REG_N(CBACR_N, N, (b))
+#define GET_TLBTR0(b)		 GET_GLOBAL_REG(TLBTR0, (b))
+#define GET_TLBTR1(b)		 GET_GLOBAL_REG(TLBTR1, (b))
+#define GET_TLBTR2(b)		 GET_GLOBAL_REG(TLBTR2, (b))
+#define GET_TESTBUSCR(b)	 GET_GLOBAL_REG(TESTBUSCR, (b))
+#define GET_GLOBAL_TLBIALL(b)	 GET_GLOBAL_REG(GLOBAL_TLBIALL, (b))
+#define GET_TLBIVMID(b)		 GET_GLOBAL_REG(TLBIVMID, (b))
+#define GET_CR(b)		 GET_GLOBAL_REG(CR, (b))
+#define GET_EAR(b)		 GET_GLOBAL_REG(EAR, (b))
+#define GET_ESR(b)		 GET_GLOBAL_REG(ESR, (b))
+#define GET_ESRRESTORE(b)	 GET_GLOBAL_REG(ESRRESTORE, (b))
+#define GET_ESYNR0(b)		 GET_GLOBAL_REG(ESYNR0, (b))
+#define GET_ESYNR1(b)		 GET_GLOBAL_REG(ESYNR1, (b))
+#define GET_REV(b)		 GET_GLOBAL_REG(REV, (b))
+#define GET_IDR(b)		 GET_GLOBAL_REG(IDR, (b))
+#define GET_RPU_ACR(b)		 GET_GLOBAL_REG(RPU_ACR, (b))
+
+
+/* Context register setters/getters */
+#define SET_SCTLR(b, c, v)	 SET_CTX_REG(SCTLR, (b), (c), (v))
+#define SET_ACTLR(b, c, v)	 SET_CTX_REG(ACTLR, (b), (c), (v))
+#define SET_CONTEXTIDR(b, c, v)	 SET_CTX_REG(CONTEXTIDR, (b), (c), (v))
+#define SET_TTBR0(b, c, v)	 SET_CTX_REG(TTBR0, (b), (c), (v))
+#define SET_TTBR1(b, c, v)	 SET_CTX_REG(TTBR1, (b), (c), (v))
+#define SET_TTBCR(b, c, v)	 SET_CTX_REG(TTBCR, (b), (c), (v))
+#define SET_PAR(b, c, v)	 SET_CTX_REG(PAR, (b), (c), (v))
+#define SET_FSR(b, c, v)	 SET_CTX_REG(FSR, (b), (c), (v))
+#define SET_FSRRESTORE(b, c, v)	 SET_CTX_REG(FSRRESTORE, (b), (c), (v))
+#define SET_FAR(b, c, v)	 SET_CTX_REG(FAR, (b), (c), (v))
+#define SET_FSYNR0(b, c, v)	 SET_CTX_REG(FSYNR0, (b), (c), (v))
+#define SET_FSYNR1(b, c, v)	 SET_CTX_REG(FSYNR1, (b), (c), (v))
+#define SET_PRRR(b, c, v)	 SET_CTX_REG(PRRR, (b), (c), (v))
+#define SET_NMRR(b, c, v)	 SET_CTX_REG(NMRR, (b), (c), (v))
+#define SET_TLBLKCR(b, c, v)	 SET_CTX_REG(TLBLCKR, (b), (c), (v))
+#define SET_V2PSR(b, c, v)	 SET_CTX_REG(V2PSR, (b), (c), (v))
+#define SET_TLBFLPTER(b, c, v)	 SET_CTX_REG(TLBFLPTER, (b), (c), (v))
+#define SET_TLBSLPTER(b, c, v)	 SET_CTX_REG(TLBSLPTER, (b), (c), (v))
+#define SET_BFBCR(b, c, v)	 SET_CTX_REG(BFBCR, (b), (c), (v))
+#define SET_CTX_TLBIALL(b, c, v) SET_CTX_REG(CTX_TLBIALL, (b), (c), (v))
+#define SET_TLBIASID(b, c, v)	 SET_CTX_REG(TLBIASID, (b), (c), (v))
+#define SET_TLBIVA(b, c, v)	 SET_CTX_REG(TLBIVA, (b), (c), (v))
+#define SET_TLBIVAA(b, c, v)	 SET_CTX_REG(TLBIVAA, (b), (c), (v))
+#define SET_V2PPR(b, c, v)	 SET_CTX_REG(V2PPR, (b), (c), (v))
+#define SET_V2PPW(b, c, v)	 SET_CTX_REG(V2PPW, (b), (c), (v))
+#define SET_V2PUR(b, c, v)	 SET_CTX_REG(V2PUR, (b), (c), (v))
+#define SET_V2PUW(b, c, v)	 SET_CTX_REG(V2PUW, (b), (c), (v))
+#define SET_RESUME(b, c, v)	 SET_CTX_REG(RESUME, (b), (c), (v))
+
+#define GET_SCTLR(b, c)		 GET_CTX_REG(SCTLR, (b), (c))
+#define GET_ACTLR(b, c)		 GET_CTX_REG(ACTLR, (b), (c))
+#define GET_CONTEXTIDR(b, c)	 GET_CTX_REG(CONTEXTIDR, (b), (c))
+#define GET_TTBR0(b, c)		 GET_CTX_REG(TTBR0, (b), (c))
+#define GET_TTBR1(b, c)		 GET_CTX_REG(TTBR1, (b), (c))
+#define GET_TTBCR(b, c)		 GET_CTX_REG(TTBCR, (b), (c))
+#define GET_PAR(b, c)		 GET_CTX_REG(PAR, (b), (c))
+#define GET_FSR(b, c)		 GET_CTX_REG(FSR, (b), (c))
+#define GET_FSRRESTORE(b, c)	 GET_CTX_REG(FSRRESTORE, (b), (c))
+#define GET_FAR(b, c)		 GET_CTX_REG(FAR, (b), (c))
+#define GET_FSYNR0(b, c)	 GET_CTX_REG(FSYNR0, (b), (c))
+#define GET_FSYNR1(b, c)	 GET_CTX_REG(FSYNR1, (b), (c))
+#define GET_PRRR(b, c)		 GET_CTX_REG(PRRR, (b), (c))
+#define GET_NMRR(b, c)		 GET_CTX_REG(NMRR, (b), (c))
+#define GET_TLBLCKR(b, c)	 GET_CTX_REG(TLBLCKR, (b), (c))
+#define GET_V2PSR(b, c)		 GET_CTX_REG(V2PSR, (b), (c))
+#define GET_TLBFLPTER(b, c)	 GET_CTX_REG(TLBFLPTER, (b), (c))
+#define GET_TLBSLPTER(b, c)	 GET_CTX_REG(TLBSLPTER, (b), (c))
+#define GET_BFBCR(b, c)		 GET_CTX_REG(BFBCR, (b), (c))
+#define GET_CTX_TLBIALL(b, c)	 GET_CTX_REG(CTX_TLBIALL, (b), (c))
+#define GET_TLBIASID(b, c)	 GET_CTX_REG(TLBIASID, (b), (c))
+#define GET_TLBIVA(b, c)	 GET_CTX_REG(TLBIVA, (b), (c))
+#define GET_TLBIVAA(b, c)	 GET_CTX_REG(TLBIVAA, (b), (c))
+#define GET_V2PPR(b, c)		 GET_CTX_REG(V2PPR, (b), (c))
+#define GET_V2PPW(b, c)		 GET_CTX_REG(V2PPW, (b), (c))
+#define GET_V2PUR(b, c)		 GET_CTX_REG(V2PUR, (b), (c))
+#define GET_V2PUW(b, c)		 GET_CTX_REG(V2PUW, (b), (c))
+#define GET_RESUME(b, c)	 GET_CTX_REG(RESUME, (b), (c))
+
+
+/* Global field setters / getters */
+/* Global Field Setters: */
+/* CBACR_N */
+#define SET_RWVMID(b, n, v)   SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID, v)
+#define SET_RWE(b, n, v)      SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE, v)
+#define SET_RWGE(b, n, v)     SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE, v)
+#define SET_CBVMID(b, n, v)   SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID, v)
+#define SET_IRPTNDX(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX, v)
+
+
+/* M2VCBR_N */
+#define SET_VMID(b, n, v)     SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID, v)
+#define SET_CBNDX(b, n, v)    SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX, v)
+#define SET_BYPASSD(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD, v)
+#define SET_BPRCOSH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH, v)
+#define SET_BPRCISH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH, v)
+#define SET_BPRCNSH(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH, v)
+#define SET_BPSHCFG(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG, v)
+#define SET_NSCFG(b, n, v)    SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG, v)
+#define SET_BPMTCFG(b, n, v)  SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG, v)
+#define SET_BPMEMTYPE(b, n, v) \
+	SET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE, v)
+
+
+/* CR */
+#define SET_RPUE(b, v)		 SET_GLOBAL_FIELD(b, CR, RPUE, v)
+#define SET_RPUERE(b, v)	 SET_GLOBAL_FIELD(b, CR, RPUERE, v)
+#define SET_RPUEIE(b, v)	 SET_GLOBAL_FIELD(b, CR, RPUEIE, v)
+#define SET_DCDEE(b, v)		 SET_GLOBAL_FIELD(b, CR, DCDEE, v)
+#define SET_CLIENTPD(b, v)       SET_GLOBAL_FIELD(b, CR, CLIENTPD, v)
+#define SET_STALLD(b, v)	 SET_GLOBAL_FIELD(b, CR, STALLD, v)
+#define SET_TLBLKCRWE(b, v)      SET_GLOBAL_FIELD(b, CR, TLBLKCRWE, v)
+#define SET_CR_TLBIALLCFG(b, v)  SET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG, v)
+#define SET_TLBIVMIDCFG(b, v)    SET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG, v)
+#define SET_CR_HUME(b, v)        SET_GLOBAL_FIELD(b, CR, CR_HUME, v)
+
+
+/* ESR */
+#define SET_CFG(b, v)		 SET_GLOBAL_FIELD(b, ESR, CFG, v)
+#define SET_BYPASS(b, v)	 SET_GLOBAL_FIELD(b, ESR, BYPASS, v)
+#define SET_ESR_MULTI(b, v)      SET_GLOBAL_FIELD(b, ESR, ESR_MULTI, v)
+
+
+/* ESYNR0 */
+#define SET_ESYNR0_AMID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID, v)
+#define SET_ESYNR0_APID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID, v)
+#define SET_ESYNR0_ABID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID, v)
+#define SET_ESYNR0_AVMID(b, v)   SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID, v)
+#define SET_ESYNR0_ATID(b, v)    SET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID, v)
+
+
+/* ESYNR1 */
+#define SET_ESYNR1_AMEMTYPE(b, v) \
+			SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE, v)
+#define SET_ESYNR1_ASHARED(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED, v)
+#define SET_ESYNR1_AINNERSHARED(b, v) \
+			SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED, v)
+#define SET_ESYNR1_APRIV(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV, v)
+#define SET_ESYNR1_APROTNS(b, v) SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS, v)
+#define SET_ESYNR1_AINST(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST, v)
+#define SET_ESYNR1_AWRITE(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE, v)
+#define SET_ESYNR1_ABURST(b, v)  SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST, v)
+#define SET_ESYNR1_ALEN(b, v)    SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN, v)
+#define SET_ESYNR1_ASIZE(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE, v)
+#define SET_ESYNR1_ALOCK(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK, v)
+#define SET_ESYNR1_AOOO(b, v)    SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO, v)
+#define SET_ESYNR1_AFULL(b, v)   SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL, v)
+#define SET_ESYNR1_AC(b, v)      SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC, v)
+#define SET_ESYNR1_DCD(b, v)     SET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD, v)
+
+
+/* TESTBUSCR */
+#define SET_TBE(b, v)		 SET_GLOBAL_FIELD(b, TESTBUSCR, TBE, v)
+#define SET_SPDMBE(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE, v)
+#define SET_WGSEL(b, v)		 SET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL, v)
+#define SET_TBLSEL(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL, v)
+#define SET_TBHSEL(b, v)	 SET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL, v)
+#define SET_SPDM0SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL, v)
+#define SET_SPDM1SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL, v)
+#define SET_SPDM2SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL, v)
+#define SET_SPDM3SEL(b, v)       SET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL, v)
+
+
+/* TLBIVMID */
+#define SET_TLBIVMID_VMID(b, v)  SET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID, v)
+
+
+/* TLBRSW */
+#define SET_TLBRSW_INDEX(b, v)   SET_GLOBAL_FIELD(b, TLBRSW, TLBRSW_INDEX, v)
+#define SET_TLBBFBS(b, v)	 SET_GLOBAL_FIELD(b, TLBRSW, TLBBFBS, v)
+
+
+/* TLBTR0 */
+#define SET_PR(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, PR, v)
+#define SET_PW(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, PW, v)
+#define SET_UR(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, UR, v)
+#define SET_UW(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, UW, v)
+#define SET_XN(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, XN, v)
+#define SET_NSDESC(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, NSDESC, v)
+#define SET_ISH(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, ISH, v)
+#define SET_SH(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, SH, v)
+#define SET_MT(b, v)		 SET_GLOBAL_FIELD(b, TLBTR0, MT, v)
+#define SET_DPSIZR(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, DPSIZR, v)
+#define SET_DPSIZC(b, v)	 SET_GLOBAL_FIELD(b, TLBTR0, DPSIZC, v)
+
+
+/* TLBTR1 */
+#define SET_TLBTR1_VMID(b, v)    SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID, v)
+#define SET_TLBTR1_PA(b, v)      SET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA, v)
+
+
+/* TLBTR2 */
+#define SET_TLBTR2_ASID(b, v)    SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID, v)
+#define SET_TLBTR2_V(b, v)       SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V, v)
+#define SET_TLBTR2_NSTID(b, v)   SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID, v)
+#define SET_TLBTR2_NV(b, v)      SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV, v)
+#define SET_TLBTR2_VA(b, v)      SET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA, v)
+
+
+/* Global Field Getters */
+/* CBACR_N */
+#define GET_RWVMID(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWVMID)
+#define GET_RWE(b, n)		 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWE)
+#define GET_RWGE(b, n)		 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), RWGE)
+#define GET_CBVMID(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), CBVMID)
+#define GET_IRPTNDX(b, n)	 GET_GLOBAL_FIELD(b, (n<<2)|(CBACR_N), IRPTNDX)
+
+
+/* M2VCBR_N */
+#define GET_VMID(b, n)       GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), VMID)
+#define GET_CBNDX(b, n)      GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), CBNDX)
+#define GET_BYPASSD(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BYPASSD)
+#define GET_BPRCOSH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCOSH)
+#define GET_BPRCISH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCISH)
+#define GET_BPRCNSH(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPRCNSH)
+#define GET_BPSHCFG(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPSHCFG)
+#define GET_NSCFG(b, n)      GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), NSCFG)
+#define GET_BPMTCFG(b, n)    GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMTCFG)
+#define GET_BPMEMTYPE(b, n)  GET_GLOBAL_FIELD(b, (n<<2)|(M2VCBR_N), BPMEMTYPE)
+
+
+/* CR */
+#define GET_RPUE(b)		 GET_GLOBAL_FIELD(b, CR, RPUE)
+#define GET_RPUERE(b)		 GET_GLOBAL_FIELD(b, CR, RPUERE)
+#define GET_RPUEIE(b)		 GET_GLOBAL_FIELD(b, CR, RPUEIE)
+#define GET_DCDEE(b)		 GET_GLOBAL_FIELD(b, CR, DCDEE)
+#define GET_CLIENTPD(b)		 GET_GLOBAL_FIELD(b, CR, CLIENTPD)
+#define GET_STALLD(b)		 GET_GLOBAL_FIELD(b, CR, STALLD)
+#define GET_TLBLKCRWE(b)	 GET_GLOBAL_FIELD(b, CR, TLBLKCRWE)
+#define GET_CR_TLBIALLCFG(b)	 GET_GLOBAL_FIELD(b, CR, CR_TLBIALLCFG)
+#define GET_TLBIVMIDCFG(b)	 GET_GLOBAL_FIELD(b, CR, TLBIVMIDCFG)
+#define GET_CR_HUME(b)		 GET_GLOBAL_FIELD(b, CR, CR_HUME)
+
+
+/* ESR */
+#define GET_CFG(b)		 GET_GLOBAL_FIELD(b, ESR, CFG)
+#define GET_BYPASS(b)		 GET_GLOBAL_FIELD(b, ESR, BYPASS)
+#define GET_ESR_MULTI(b)	 GET_GLOBAL_FIELD(b, ESR, ESR_MULTI)
+
+
+/* ESYNR0 */
+#define GET_ESYNR0_AMID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AMID)
+#define GET_ESYNR0_APID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_APID)
+#define GET_ESYNR0_ABID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ABID)
+#define GET_ESYNR0_AVMID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_AVMID)
+#define GET_ESYNR0_ATID(b)	 GET_GLOBAL_FIELD(b, ESYNR0, ESYNR0_ATID)
+
+
+/* ESYNR1 */
+#define GET_ESYNR1_AMEMTYPE(b)   GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AMEMTYPE)
+#define GET_ESYNR1_ASHARED(b)    GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASHARED)
+#define GET_ESYNR1_AINNERSHARED(b) \
+			GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINNERSHARED)
+#define GET_ESYNR1_APRIV(b)      GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APRIV)
+#define GET_ESYNR1_APROTNS(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_APROTNS)
+#define GET_ESYNR1_AINST(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AINST)
+#define GET_ESYNR1_AWRITE(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AWRITE)
+#define GET_ESYNR1_ABURST(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ABURST)
+#define GET_ESYNR1_ALEN(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALEN)
+#define GET_ESYNR1_ASIZE(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ASIZE)
+#define GET_ESYNR1_ALOCK(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_ALOCK)
+#define GET_ESYNR1_AOOO(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AOOO)
+#define GET_ESYNR1_AFULL(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AFULL)
+#define GET_ESYNR1_AC(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_AC)
+#define GET_ESYNR1_DCD(b)	 GET_GLOBAL_FIELD(b, ESYNR1, ESYNR1_DCD)
+
+
+/* IDR */
+#define GET_NM2VCBMT(b)		 GET_GLOBAL_FIELD(b, IDR, NM2VCBMT)
+#define GET_HTW(b)		 GET_GLOBAL_FIELD(b, IDR, HTW)
+#define GET_HUM(b)		 GET_GLOBAL_FIELD(b, IDR, HUM)
+#define GET_TLBSIZE(b)		 GET_GLOBAL_FIELD(b, IDR, TLBSIZE)
+#define GET_NCB(b)		 GET_GLOBAL_FIELD(b, IDR, NCB)
+#define GET_NIRPT(b)		 GET_GLOBAL_FIELD(b, IDR, NIRPT)
+
+
+/* REV */
+#define GET_MAJOR(b)		 GET_GLOBAL_FIELD(b, REV, MAJOR)
+#define GET_MINOR(b)		 GET_GLOBAL_FIELD(b, REV, MINOR)
+
+
+/* TESTBUSCR */
+#define GET_TBE(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBE)
+#define GET_SPDMBE(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDMBE)
+#define GET_WGSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, WGSEL)
+#define GET_TBLSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBLSEL)
+#define GET_TBHSEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, TBHSEL)
+#define GET_SPDM0SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM0SEL)
+#define GET_SPDM1SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM1SEL)
+#define GET_SPDM2SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM2SEL)
+#define GET_SPDM3SEL(b)		 GET_GLOBAL_FIELD(b, TESTBUSCR, SPDM3SEL)
+
+
+/* TLBIVMID */
+#define GET_TLBIVMID_VMID(b)	 GET_GLOBAL_FIELD(b, TLBIVMID, TLBIVMID_VMID)
+
+
+/* TLBTR0 */
+#define GET_PR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, PR)
+#define GET_PW(b)		 GET_GLOBAL_FIELD(b, TLBTR0, PW)
+#define GET_UR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, UR)
+#define GET_UW(b)		 GET_GLOBAL_FIELD(b, TLBTR0, UW)
+#define GET_XN(b)		 GET_GLOBAL_FIELD(b, TLBTR0, XN)
+#define GET_NSDESC(b)		 GET_GLOBAL_FIELD(b, TLBTR0, NSDESC)
+#define GET_ISH(b)		 GET_GLOBAL_FIELD(b, TLBTR0, ISH)
+#define GET_SH(b)		 GET_GLOBAL_FIELD(b, TLBTR0, SH)
+#define GET_MT(b)		 GET_GLOBAL_FIELD(b, TLBTR0, MT)
+#define GET_DPSIZR(b)		 GET_GLOBAL_FIELD(b, TLBTR0, DPSIZR)
+#define GET_DPSIZC(b)		 GET_GLOBAL_FIELD(b, TLBTR0, DPSIZC)
+
+
+/* TLBTR1 */
+#define GET_TLBTR1_VMID(b)	 GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_VMID)
+#define GET_TLBTR1_PA(b)	 GET_GLOBAL_FIELD(b, TLBTR1, TLBTR1_PA)
+
+
+/* TLBTR2 */
+#define GET_TLBTR2_ASID(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_ASID)
+#define GET_TLBTR2_V(b)		 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_V)
+#define GET_TLBTR2_NSTID(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NSTID)
+#define GET_TLBTR2_NV(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_NV)
+#define GET_TLBTR2_VA(b)	 GET_GLOBAL_FIELD(b, TLBTR2, TLBTR2_VA)
+
+
+/* Context Register setters / getters */
+/* Context Register setters */
+/* ACTLR */
+#define SET_CFERE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFERE, v)
+#define SET_CFEIE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFEIE, v)
+#define SET_PTSHCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG, v)
+#define SET_RCOSH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCOSH, v)
+#define SET_RCISH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCISH, v)
+#define SET_RCNSH(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, RCNSH, v)
+#define SET_PRIVCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG, v)
+#define SET_DNA(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, DNA, v)
+#define SET_DNLV2PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA, v)
+#define SET_TLBMCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG, v)
+#define SET_CFCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, CFCFG, v)
+#define SET_TIPCF(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, TIPCF, v)
+#define SET_V2PCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG, v)
+#define SET_HUME(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, HUME, v)
+#define SET_PTMTCFG(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG, v)
+#define SET_PTMEMTYPE(b, c, v)	 SET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE, v)
+
+
+/* BFBCR */
+#define SET_BFBDFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE, v)
+#define SET_BFBSFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE, v)
+#define SET_SFVS(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, SFVS, v)
+#define SET_FLVIC(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, FLVIC, v)
+#define SET_SLVIC(b, c, v)	 SET_CONTEXT_FIELD(b, c, BFBCR, SLVIC, v)
+
+
+/* CONTEXTIDR */
+#define SET_CONTEXTIDR_ASID(b, c, v)   \
+		SET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID, v)
+#define SET_CONTEXTIDR_PROCID(b, c, v) \
+		SET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID, v)
+
+
+/* FSR */
+#define SET_TF(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, TF, v)
+#define SET_AFF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, AFF, v)
+#define SET_APF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, APF, v)
+#define SET_TLBMF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, TLBMF, v)
+#define SET_HTWDEEF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, HTWDEEF, v)
+#define SET_HTWSEEF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, HTWSEEF, v)
+#define SET_MHF(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, MHF, v)
+#define SET_SL(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, SL, v)
+#define SET_SS(b, c, v)		 SET_CONTEXT_FIELD(b, c, FSR, SS, v)
+#define SET_MULTI(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSR, MULTI, v)
+
+
+/* FSYNR0 */
+#define SET_AMID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, AMID, v)
+#define SET_APID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, APID, v)
+#define SET_ABID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, ABID, v)
+#define SET_ATID(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR0, ATID, v)
+
+
+/* FSYNR1 */
+#define SET_AMEMTYPE(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE, v)
+#define SET_ASHARED(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED, v)
+#define SET_AINNERSHARED(b, c, v)  \
+				SET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED, v)
+#define SET_APRIV(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, APRIV, v)
+#define SET_APROTNS(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS, v)
+#define SET_AINST(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AINST, v)
+#define SET_AWRITE(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE, v)
+#define SET_ABURST(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ABURST, v)
+#define SET_ALEN(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ALEN, v)
+#define SET_FSYNR1_ASIZE(b, c, v) \
+				SET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE, v)
+#define SET_ALOCK(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK, v)
+#define SET_AFULL(b, c, v)	 SET_CONTEXT_FIELD(b, c, FSYNR1, AFULL, v)
+
+
+/* NMRR */
+#define SET_ICPC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC0, v)
+#define SET_ICPC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC1, v)
+#define SET_ICPC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC2, v)
+#define SET_ICPC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC3, v)
+#define SET_ICPC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC4, v)
+#define SET_ICPC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC5, v)
+#define SET_ICPC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC6, v)
+#define SET_ICPC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, ICPC7, v)
+#define SET_OCPC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC0, v)
+#define SET_OCPC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC1, v)
+#define SET_OCPC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC2, v)
+#define SET_OCPC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC3, v)
+#define SET_OCPC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC4, v)
+#define SET_OCPC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC5, v)
+#define SET_OCPC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC6, v)
+#define SET_OCPC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, NMRR, OCPC7, v)
+
+
+/* PAR */
+#define SET_FAULT(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT, v)
+
+#define SET_FAULT_TF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_TF, v)
+#define SET_FAULT_AFF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF, v)
+#define SET_FAULT_APF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_APF, v)
+#define SET_FAULT_TLBMF(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF, v)
+#define SET_FAULT_HTWDEEF(b, c, v) \
+				SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF, v)
+#define SET_FAULT_HTWSEEF(b, c, v) \
+				SET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF, v)
+#define SET_FAULT_MHF(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF, v)
+#define SET_FAULT_SL(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_SL, v)
+#define SET_FAULT_SS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, FAULT_SS, v)
+
+#define SET_NOFAULT_SS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SS, v)
+#define SET_NOFAULT_MT(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_MT, v)
+#define SET_NOFAULT_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_SH, v)
+#define SET_NOFAULT_NS(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NS, v)
+#define SET_NOFAULT_NOS(b, c, v) SET_CONTEXT_FIELD(b, c, PAR, NOFAULT_NOS, v)
+#define SET_NPFAULT_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, PAR, NPFAULT_PA, v)
+
+
+/* PRRR */
+#define SET_MTC0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC0, v)
+#define SET_MTC1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC1, v)
+#define SET_MTC2(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC2, v)
+#define SET_MTC3(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC3, v)
+#define SET_MTC4(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC4, v)
+#define SET_MTC5(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC5, v)
+#define SET_MTC6(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC6, v)
+#define SET_MTC7(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, MTC7, v)
+#define SET_SHDSH0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHDSH0, v)
+#define SET_SHDSH1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHDSH1, v)
+#define SET_SHNMSH0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0, v)
+#define SET_SHNMSH1(b, c, v)     SET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1, v)
+#define SET_NOS0(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS0, v)
+#define SET_NOS1(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS1, v)
+#define SET_NOS2(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS2, v)
+#define SET_NOS3(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS3, v)
+#define SET_NOS4(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS4, v)
+#define SET_NOS5(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS5, v)
+#define SET_NOS6(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS6, v)
+#define SET_NOS7(b, c, v)	 SET_CONTEXT_FIELD(b, c, PRRR, NOS7, v)
+
+
+/* RESUME */
+#define SET_TNR(b, c, v)	 SET_CONTEXT_FIELD(b, c, RESUME, TNR, v)
+
+
+/* SCTLR */
+#define SET_M(b, c, v)		 SET_CONTEXT_FIELD(b, c, SCTLR, M, v)
+#define SET_TRE(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, TRE, v)
+#define SET_AFE(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, AFE, v)
+#define SET_HAF(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, HAF, v)
+#define SET_BE(b, c, v)		 SET_CONTEXT_FIELD(b, c, SCTLR, BE, v)
+#define SET_AFFD(b, c, v)	 SET_CONTEXT_FIELD(b, c, SCTLR, AFFD, v)
+
+
+/* TLBLKCR */
+#define SET_LKE(b, c, v)	   SET_CONTEXT_FIELD(b, c, TLBLKCR, LKE, v)
+#define SET_TLBLKCR_TLBIALLCFG(b, c, v) \
+			SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG, v)
+#define SET_TLBIASIDCFG(b, c, v) \
+			SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG, v)
+#define SET_TLBIVAACFG(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG, v)
+#define SET_FLOOR(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR, v)
+#define SET_VICTIM(b, c, v)	SET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM, v)
+
+
+/* TTBCR */
+#define SET_N(b, c, v)	         SET_CONTEXT_FIELD(b, c, TTBCR, N, v)
+#define SET_PD0(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBCR, PD0, v)
+#define SET_PD1(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBCR, PD1, v)
+
+
+/* TTBR0 */
+#define SET_TTBR0_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH, v)
+#define SET_TTBR0_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH, v)
+#define SET_TTBR0_ORGN(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN, v)
+#define SET_TTBR0_NOS(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS, v)
+#define SET_TTBR0_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL, v)
+#define SET_TTBR0_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA, v)
+
+
+/* TTBR1 */
+#define SET_TTBR1_IRGNH(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH, v)
+#define SET_TTBR1_SH(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH, v)
+#define SET_TTBR1_ORGN(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN, v)
+#define SET_TTBR1_NOS(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS, v)
+#define SET_TTBR1_IRGNL(b, c, v) SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL, v)
+#define SET_TTBR1_PA(b, c, v)	 SET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA, v)
+
+
+/* V2PSR */
+#define SET_HIT(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PSR, HIT, v)
+#define SET_INDEX(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PSR, INDEX, v)
+
+
+/* V2Pxx UW UR PW PR */
+#define SET_V2PUW_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_INDEX, v)
+#define SET_V2PUW_VA(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_VA, v)
+
+#define SET_V2PUR_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_INDEX, v)
+#define SET_V2PUR_VA(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_VA, v)
+
+#define SET_V2PPW_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_INDEX, v)
+#define SET_V2PPW_VA(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_VA, v)
+
+#define SET_V2PPR_INDEX(b, c, v) SET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_INDEX, v)
+#define SET_V2PPR_VA(b, c, v)	 SET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_VA, v)
+
+
+/* Context Register getters */
+/* ACTLR */
+#define GET_CFERE(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFERE)
+#define GET_CFEIE(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFEIE)
+#define GET_PTSHCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PTSHCFG)
+#define GET_RCOSH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCOSH)
+#define GET_RCISH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCISH)
+#define GET_RCNSH(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, RCNSH)
+#define GET_PRIVCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PRIVCFG)
+#define GET_DNA(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, DNA)
+#define GET_DNLV2PA(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, DNLV2PA)
+#define GET_TLBMCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, TLBMCFG)
+#define GET_CFCFG(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, CFCFG)
+#define GET_TIPCF(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, TIPCF)
+#define GET_V2PCFG(b, c)        GET_CONTEXT_FIELD(b, c, ACTLR, V2PCFG)
+#define GET_HUME(b, c)	        GET_CONTEXT_FIELD(b, c, ACTLR, HUME)
+#define GET_PTMTCFG(b, c)       GET_CONTEXT_FIELD(b, c, ACTLR, PTMTCFG)
+#define GET_PTMEMTYPE(b, c)     GET_CONTEXT_FIELD(b, c, ACTLR, PTMEMTYPE)
+
+/* BFBCR */
+#define GET_BFBDFE(b, c)	GET_CONTEXT_FIELD(b, c, BFBCR, BFBDFE)
+#define GET_BFBSFE(b, c)	GET_CONTEXT_FIELD(b, c, BFBCR, BFBSFE)
+#define GET_SFVS(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, SFVS)
+#define GET_FLVIC(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, FLVIC)
+#define GET_SLVIC(b, c)		GET_CONTEXT_FIELD(b, c, BFBCR, SLVIC)
+
+
+/* CONTEXTIDR */
+#define GET_CONTEXTIDR_ASID(b, c) \
+			GET_CONTEXT_FIELD(b, c, CONTEXTIDR, CONTEXTIDR_ASID)
+#define GET_CONTEXTIDR_PROCID(b, c) GET_CONTEXT_FIELD(b, c, CONTEXTIDR, PROCID)
+
+
+/* FSR */
+#define GET_TF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, TF)
+#define GET_AFF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, AFF)
+#define GET_APF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, APF)
+#define GET_TLBMF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, TLBMF)
+#define GET_HTWDEEF(b, c)	GET_CONTEXT_FIELD(b, c, FSR, HTWDEEF)
+#define GET_HTWSEEF(b, c)	GET_CONTEXT_FIELD(b, c, FSR, HTWSEEF)
+#define GET_MHF(b, c)		GET_CONTEXT_FIELD(b, c, FSR, MHF)
+#define GET_SL(b, c)		GET_CONTEXT_FIELD(b, c, FSR, SL)
+#define GET_SS(b, c)		GET_CONTEXT_FIELD(b, c, FSR, SS)
+#define GET_MULTI(b, c)		GET_CONTEXT_FIELD(b, c, FSR, MULTI)
+
+
+/* FSYNR0 */
+#define GET_AMID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, AMID)
+#define GET_APID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, APID)
+#define GET_ABID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, ABID)
+#define GET_ATID(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR0, ATID)
+
+
+/* FSYNR1 */
+#define GET_AMEMTYPE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, AMEMTYPE)
+#define GET_ASHARED(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, ASHARED)
+#define GET_AINNERSHARED(b, c)  GET_CONTEXT_FIELD(b, c, FSYNR1, AINNERSHARED)
+#define GET_APRIV(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, APRIV)
+#define GET_APROTNS(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, APROTNS)
+#define GET_AINST(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, AINST)
+#define GET_AWRITE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, AWRITE)
+#define GET_ABURST(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, ABURST)
+#define GET_ALEN(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, ALEN)
+#define GET_FSYNR1_ASIZE(b, c)	GET_CONTEXT_FIELD(b, c, FSYNR1, FSYNR1_ASIZE)
+#define GET_ALOCK(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, ALOCK)
+#define GET_AFULL(b, c)		GET_CONTEXT_FIELD(b, c, FSYNR1, AFULL)
+
+
+/* NMRR */
+#define GET_ICPC0(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC0)
+#define GET_ICPC1(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC1)
+#define GET_ICPC2(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC2)
+#define GET_ICPC3(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC3)
+#define GET_ICPC4(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC4)
+#define GET_ICPC5(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC5)
+#define GET_ICPC6(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC6)
+#define GET_ICPC7(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, ICPC7)
+#define GET_OCPC0(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC0)
+#define GET_OCPC1(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC1)
+#define GET_OCPC2(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC2)
+#define GET_OCPC3(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC3)
+#define GET_OCPC4(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC4)
+#define GET_OCPC5(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC5)
+#define GET_OCPC6(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC6)
+#define GET_OCPC7(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC7)
+
+
+/* PAR */
+#define GET_FAULT(b, c)		GET_CONTEXT_FIELD(b, c, PAR, FAULT)
+
+#define GET_FAULT_TF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_TF)
+#define GET_FAULT_AFF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_AFF)
+#define GET_FAULT_APF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_APF)
+#define GET_FAULT_TLBMF(b, c)   GET_CONTEXT_FIELD(b, c, PAR, FAULT_TLBMF)
+#define GET_FAULT_HTWDEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWDEEF)
+#define GET_FAULT_HTWSEEF(b, c) GET_CONTEXT_FIELD(b, c, PAR, FAULT_HTWSEEF)
+#define GET_FAULT_MHF(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_MHF)
+#define GET_FAULT_SL(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_SL)
+#define GET_FAULT_SS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, FAULT_SS)
+
+#define GET_NOFAULT_SS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SS)
+#define GET_NOFAULT_MT(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_MT)
+#define GET_NOFAULT_SH(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_SH)
+#define GET_NOFAULT_NS(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NS)
+#define GET_NOFAULT_NOS(b, c)   GET_CONTEXT_FIELD(b, c, PAR, PAR_NOFAULT_NOS)
+#define GET_NPFAULT_PA(b, c)	GET_CONTEXT_FIELD(b, c, PAR, PAR_NPFAULT_PA)
+
+
+/* PRRR */
+#define GET_MTC0(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC0)
+#define GET_MTC1(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC1)
+#define GET_MTC2(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC2)
+#define GET_MTC3(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC3)
+#define GET_MTC4(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC4)
+#define GET_MTC5(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC5)
+#define GET_MTC6(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC6)
+#define GET_MTC7(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, MTC7)
+#define GET_SHDSH0(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHDSH0)
+#define GET_SHDSH1(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHDSH1)
+#define GET_SHNMSH0(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH0)
+#define GET_SHNMSH1(b, c)	GET_CONTEXT_FIELD(b, c, PRRR, SHNMSH1)
+#define GET_NOS0(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS0)
+#define GET_NOS1(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS1)
+#define GET_NOS2(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS2)
+#define GET_NOS3(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS3)
+#define GET_NOS4(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS4)
+#define GET_NOS5(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS5)
+#define GET_NOS6(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS6)
+#define GET_NOS7(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS7)
+
+
+/* RESUME */
+#define GET_TNR(b, c)		GET_CONTEXT_FIELD(b, c, RESUME, TNR)
+
+
+/* SCTLR */
+#define GET_M(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, M)
+#define GET_TRE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, TRE)
+#define GET_AFE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, AFE)
+#define GET_HAF(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, HAF)
+#define GET_BE(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, BE)
+#define GET_AFFD(b, c)		GET_CONTEXT_FIELD(b, c, SCTLR, AFFD)
+
+
+/* TLBLKCR */
+#define GET_LKE(b, c)		GET_CONTEXT_FIELD(b, c, TLBLKCR, LKE)
+#define GET_TLBLCKR_TLBIALLCFG(b, c) \
+			GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBLCKR_TLBIALLCFG)
+#define GET_TLBIASIDCFG(b, c)   GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIASIDCFG)
+#define GET_TLBIVAACFG(b, c)	GET_CONTEXT_FIELD(b, c, TLBLKCR, TLBIVAACFG)
+#define GET_FLOOR(b, c)		GET_CONTEXT_FIELD(b, c, TLBLKCR, FLOOR)
+#define GET_VICTIM(b, c)	GET_CONTEXT_FIELD(b, c, TLBLKCR, VICTIM)
+
+
+/* TTBCR */
+#define GET_N(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, N)
+#define GET_PD0(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, PD0)
+#define GET_PD1(b, c)		GET_CONTEXT_FIELD(b, c, TTBCR, PD1)
+
+
+/* TTBR0 */
+#define GET_TTBR0_IRGNH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNH)
+#define GET_TTBR0_SH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_SH)
+#define GET_TTBR0_ORGN(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_ORGN)
+#define GET_TTBR0_NOS(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_NOS)
+#define GET_TTBR0_IRGNL(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_IRGNL)
+#define GET_TTBR0_PA(b, c)	GET_CONTEXT_FIELD(b, c, TTBR0, TTBR0_PA)
+
+
+/* TTBR1 */
+#define GET_TTBR1_IRGNH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNH)
+#define GET_TTBR1_SH(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_SH)
+#define GET_TTBR1_ORGN(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_ORGN)
+#define GET_TTBR1_NOS(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_NOS)
+#define GET_TTBR1_IRGNL(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_IRGNL)
+#define GET_TTBR1_PA(b, c)	GET_CONTEXT_FIELD(b, c, TTBR1, TTBR1_PA)
+
+
+/* V2PSR */
+#define GET_HIT(b, c)		GET_CONTEXT_FIELD(b, c, V2PSR, HIT)
+#define GET_INDEX(b, c)		GET_CONTEXT_FIELD(b, c, V2PSR, INDEX)
+
+
+/* V2Pxx UW UR PW PR */
+#define GET_V2PUW_INDEX(b, c)	GET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_INDEX)
+#define GET_V2PUW_VA(b, c)	GET_CONTEXT_FIELD(b, c, V2PUW, V2Pxx_VA)
+
+#define GET_V2PUR_INDEX(b, c)	GET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_INDEX)
+#define GET_V2PUR_VA(b, c)	GET_CONTEXT_FIELD(b, c, V2PUR, V2Pxx_VA)
+
+#define GET_V2PPW_INDEX(b, c)	GET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_INDEX)
+#define GET_V2PPW_VA(b, c)	GET_CONTEXT_FIELD(b, c, V2PPW, V2Pxx_VA)
+
+#define GET_V2PPR_INDEX(b, c)	GET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_INDEX)
+#define GET_V2PPR_VA(b, c)	GET_CONTEXT_FIELD(b, c, V2PPR, V2Pxx_VA)
+
+
+/* Global Registers */
+#define M2VCBR_N	(0xFF000)
+#define CBACR_N		(0xFF800)
+#define TLBRSW		(0xFFE00)
+#define TLBTR0		(0xFFE80)
+#define TLBTR1		(0xFFE84)
+#define TLBTR2		(0xFFE88)
+#define TESTBUSCR	(0xFFE8C)
+#define GLOBAL_TLBIALL	(0xFFF00)
+#define TLBIVMID	(0xFFF04)
+#define CR		(0xFFF80)
+#define EAR		(0xFFF84)
+#define ESR		(0xFFF88)
+#define ESRRESTORE	(0xFFF8C)
+#define ESYNR0		(0xFFF90)
+#define ESYNR1		(0xFFF94)
+#define REV		(0xFFFF4)
+#define IDR		(0xFFFF8)
+#define RPU_ACR		(0xFFFFC)
+
+
+/* Context Bank Registers */
+#define SCTLR		(0x000)
+#define ACTLR		(0x004)
+#define CONTEXTIDR	(0x008)
+#define TTBR0		(0x010)
+#define TTBR1		(0x014)
+#define TTBCR		(0x018)
+#define PAR		(0x01C)
+#define FSR		(0x020)
+#define FSRRESTORE	(0x024)
+#define FAR		(0x028)
+#define FSYNR0		(0x02C)
+#define FSYNR1		(0x030)
+#define PRRR		(0x034)
+#define NMRR		(0x038)
+#define TLBLCKR		(0x03C)
+#define V2PSR		(0x040)
+#define TLBFLPTER	(0x044)
+#define TLBSLPTER	(0x048)
+#define BFBCR		(0x04C)
+#define CTX_TLBIALL	(0x800)
+#define TLBIASID	(0x804)
+#define TLBIVA		(0x808)
+#define TLBIVAA		(0x80C)
+#define V2PPR		(0x810)
+#define V2PPW		(0x814)
+#define V2PUR		(0x818)
+#define V2PUW		(0x81C)
+#define RESUME		(0x820)
+
+
+/* Global Register Fields */
+/* CBACRn */
+#define RWVMID        (RWVMID_MASK       << RWVMID_SHIFT)
+#define RWE           (RWE_MASK          << RWE_SHIFT)
+#define RWGE          (RWGE_MASK         << RWGE_SHIFT)
+#define CBVMID        (CBVMID_MASK       << CBVMID_SHIFT)
+#define IRPTNDX       (IRPTNDX_MASK      << IRPTNDX_SHIFT)
+
+
+/* CR */
+#define RPUE          (RPUE_MASK          << RPUE_SHIFT)
+#define RPUERE        (RPUERE_MASK        << RPUERE_SHIFT)
+#define RPUEIE        (RPUEIE_MASK        << RPUEIE_SHIFT)
+#define DCDEE         (DCDEE_MASK         << DCDEE_SHIFT)
+#define CLIENTPD      (CLIENTPD_MASK      << CLIENTPD_SHIFT)
+#define STALLD        (STALLD_MASK        << STALLD_SHIFT)
+#define TLBLKCRWE     (TLBLKCRWE_MASK     << TLBLKCRWE_SHIFT)
+#define CR_TLBIALLCFG (CR_TLBIALLCFG_MASK << CR_TLBIALLCFG_SHIFT)
+#define TLBIVMIDCFG   (TLBIVMIDCFG_MASK   << TLBIVMIDCFG_SHIFT)
+#define CR_HUME       (CR_HUME_MASK       << CR_HUME_SHIFT)
+
+
+/* ESR */
+#define CFG           (CFG_MASK          << CFG_SHIFT)
+#define BYPASS        (BYPASS_MASK       << BYPASS_SHIFT)
+#define ESR_MULTI     (ESR_MULTI_MASK    << ESR_MULTI_SHIFT)
+
+
+/* ESYNR0 */
+#define ESYNR0_AMID   (ESYNR0_AMID_MASK  << ESYNR0_AMID_SHIFT)
+#define ESYNR0_APID   (ESYNR0_APID_MASK  << ESYNR0_APID_SHIFT)
+#define ESYNR0_ABID   (ESYNR0_ABID_MASK  << ESYNR0_ABID_SHIFT)
+#define ESYNR0_AVMID  (ESYNR0_AVMID_MASK << ESYNR0_AVMID_SHIFT)
+#define ESYNR0_ATID   (ESYNR0_ATID_MASK  << ESYNR0_ATID_SHIFT)
+
+
+/* ESYNR1 */
+#define ESYNR1_AMEMTYPE      (ESYNR1_AMEMTYPE_MASK    << ESYNR1_AMEMTYPE_SHIFT)
+#define ESYNR1_ASHARED       (ESYNR1_ASHARED_MASK     << ESYNR1_ASHARED_SHIFT)
+#define ESYNR1_AINNERSHARED  (ESYNR1_AINNERSHARED_MASK<< \
+						ESYNR1_AINNERSHARED_SHIFT)
+#define ESYNR1_APRIV         (ESYNR1_APRIV_MASK       << ESYNR1_APRIV_SHIFT)
+#define ESYNR1_APROTNS       (ESYNR1_APROTNS_MASK     << ESYNR1_APROTNS_SHIFT)
+#define ESYNR1_AINST         (ESYNR1_AINST_MASK       << ESYNR1_AINST_SHIFT)
+#define ESYNR1_AWRITE        (ESYNR1_AWRITE_MASK      << ESYNR1_AWRITE_SHIFT)
+#define ESYNR1_ABURST        (ESYNR1_ABURST_MASK      << ESYNR1_ABURST_SHIFT)
+#define ESYNR1_ALEN          (ESYNR1_ALEN_MASK        << ESYNR1_ALEN_SHIFT)
+#define ESYNR1_ASIZE         (ESYNR1_ASIZE_MASK       << ESYNR1_ASIZE_SHIFT)
+#define ESYNR1_ALOCK         (ESYNR1_ALOCK_MASK       << ESYNR1_ALOCK_SHIFT)
+#define ESYNR1_AOOO          (ESYNR1_AOOO_MASK        << ESYNR1_AOOO_SHIFT)
+#define ESYNR1_AFULL         (ESYNR1_AFULL_MASK       << ESYNR1_AFULL_SHIFT)
+#define ESYNR1_AC            (ESYNR1_AC_MASK          << ESYNR1_AC_SHIFT)
+#define ESYNR1_DCD           (ESYNR1_DCD_MASK         << ESYNR1_DCD_SHIFT)
+
+
+/* IDR */
+#define NM2VCBMT      (NM2VCBMT_MASK     << NM2VCBMT_SHIFT)
+#define HTW           (HTW_MASK          << HTW_SHIFT)
+#define HUM           (HUM_MASK          << HUM_SHIFT)
+#define TLBSIZE       (TLBSIZE_MASK      << TLBSIZE_SHIFT)
+#define NCB           (NCB_MASK          << NCB_SHIFT)
+#define NIRPT         (NIRPT_MASK        << NIRPT_SHIFT)
+
+
+/* M2VCBRn */
+#define VMID          (VMID_MASK         << VMID_SHIFT)
+#define CBNDX         (CBNDX_MASK        << CBNDX_SHIFT)
+#define BYPASSD       (BYPASSD_MASK      << BYPASSD_SHIFT)
+#define BPRCOSH       (BPRCOSH_MASK      << BPRCOSH_SHIFT)
+#define BPRCISH       (BPRCISH_MASK      << BPRCISH_SHIFT)
+#define BPRCNSH       (BPRCNSH_MASK      << BPRCNSH_SHIFT)
+#define BPSHCFG       (BPSHCFG_MASK      << BPSHCFG_SHIFT)
+#define NSCFG         (NSCFG_MASK        << NSCFG_SHIFT)
+#define BPMTCFG       (BPMTCFG_MASK      << BPMTCFG_SHIFT)
+#define BPMEMTYPE     (BPMEMTYPE_MASK    << BPMEMTYPE_SHIFT)
+
+
+/* REV */
+#define IDR_MINOR     (MINOR_MASK        << MINOR_SHIFT)
+#define IDR_MAJOR     (MAJOR_MASK        << MAJOR_SHIFT)
+
+
+/* TESTBUSCR */
+#define TBE           (TBE_MASK          << TBE_SHIFT)
+#define SPDMBE        (SPDMBE_MASK       << SPDMBE_SHIFT)
+#define WGSEL         (WGSEL_MASK        << WGSEL_SHIFT)
+#define TBLSEL        (TBLSEL_MASK       << TBLSEL_SHIFT)
+#define TBHSEL        (TBHSEL_MASK       << TBHSEL_SHIFT)
+#define SPDM0SEL      (SPDM0SEL_MASK     << SPDM0SEL_SHIFT)
+#define SPDM1SEL      (SPDM1SEL_MASK     << SPDM1SEL_SHIFT)
+#define SPDM2SEL      (SPDM2SEL_MASK     << SPDM2SEL_SHIFT)
+#define SPDM3SEL      (SPDM3SEL_MASK     << SPDM3SEL_SHIFT)
+
+
+/* TLBIVMID */
+#define TLBIVMID_VMID (TLBIVMID_VMID_MASK << TLBIVMID_VMID_SHIFT)
+
+
+/* TLBRSW */
+#define TLBRSW_INDEX  (TLBRSW_INDEX_MASK << TLBRSW_INDEX_SHIFT)
+#define TLBBFBS       (TLBBFBS_MASK      << TLBBFBS_SHIFT)
+
+
+/* TLBTR0 */
+#define PR            (PR_MASK           << PR_SHIFT)
+#define PW            (PW_MASK           << PW_SHIFT)
+#define UR            (UR_MASK           << UR_SHIFT)
+#define UW            (UW_MASK           << UW_SHIFT)
+#define XN            (XN_MASK           << XN_SHIFT)
+#define NSDESC        (NSDESC_MASK       << NSDESC_SHIFT)
+#define ISH           (ISH_MASK          << ISH_SHIFT)
+#define SH            (SH_MASK           << SH_SHIFT)
+#define MT            (MT_MASK           << MT_SHIFT)
+#define DPSIZR        (DPSIZR_MASK       << DPSIZR_SHIFT)
+#define DPSIZC        (DPSIZC_MASK       << DPSIZC_SHIFT)
+
+
+/* TLBTR1 */
+#define TLBTR1_VMID   (TLBTR1_VMID_MASK  << TLBTR1_VMID_SHIFT)
+#define TLBTR1_PA     (TLBTR1_PA_MASK    << TLBTR1_PA_SHIFT)
+
+
+/* TLBTR2 */
+#define TLBTR2_ASID   (TLBTR2_ASID_MASK  << TLBTR2_ASID_SHIFT)
+#define TLBTR2_V      (TLBTR2_V_MASK     << TLBTR2_V_SHIFT)
+#define TLBTR2_NSTID  (TLBTR2_NSTID_MASK << TLBTR2_NSTID_SHIFT)
+#define TLBTR2_NV     (TLBTR2_NV_MASK    << TLBTR2_NV_SHIFT)
+#define TLBTR2_VA     (TLBTR2_VA_MASK    << TLBTR2_VA_SHIFT)
+
+
+/* Context Register Fields */
+/* ACTLR */
+#define CFERE              (CFERE_MASK              << CFERE_SHIFT)
+#define CFEIE              (CFEIE_MASK              << CFEIE_SHIFT)
+#define PTSHCFG            (PTSHCFG_MASK            << PTSHCFG_SHIFT)
+#define RCOSH              (RCOSH_MASK              << RCOSH_SHIFT)
+#define RCISH              (RCISH_MASK              << RCISH_SHIFT)
+#define RCNSH              (RCNSH_MASK              << RCNSH_SHIFT)
+#define PRIVCFG            (PRIVCFG_MASK            << PRIVCFG_SHIFT)
+#define DNA                (DNA_MASK                << DNA_SHIFT)
+#define DNLV2PA            (DNLV2PA_MASK            << DNLV2PA_SHIFT)
+#define TLBMCFG            (TLBMCFG_MASK            << TLBMCFG_SHIFT)
+#define CFCFG              (CFCFG_MASK              << CFCFG_SHIFT)
+#define TIPCF              (TIPCF_MASK              << TIPCF_SHIFT)
+#define V2PCFG             (V2PCFG_MASK             << V2PCFG_SHIFT)
+#define HUME               (HUME_MASK               << HUME_SHIFT)
+#define PTMTCFG            (PTMTCFG_MASK            << PTMTCFG_SHIFT)
+#define PTMEMTYPE          (PTMEMTYPE_MASK          << PTMEMTYPE_SHIFT)
+
+
+/* BFBCR */
+#define BFBDFE             (BFBDFE_MASK             << BFBDFE_SHIFT)
+#define BFBSFE             (BFBSFE_MASK             << BFBSFE_SHIFT)
+#define SFVS               (SFVS_MASK               << SFVS_SHIFT)
+#define FLVIC              (FLVIC_MASK              << FLVIC_SHIFT)
+#define SLVIC              (SLVIC_MASK              << SLVIC_SHIFT)
+
+
+/* CONTEXTIDR */
+#define CONTEXTIDR_ASID    (CONTEXTIDR_ASID_MASK    << CONTEXTIDR_ASID_SHIFT)
+#define PROCID             (PROCID_MASK             << PROCID_SHIFT)
+
+
+/* FSR */
+#define TF                 (TF_MASK                 << TF_SHIFT)
+#define AFF                (AFF_MASK                << AFF_SHIFT)
+#define APF                (APF_MASK                << APF_SHIFT)
+#define TLBMF              (TLBMF_MASK              << TLBMF_SHIFT)
+#define HTWDEEF            (HTWDEEF_MASK            << HTWDEEF_SHIFT)
+#define HTWSEEF            (HTWSEEF_MASK            << HTWSEEF_SHIFT)
+#define MHF                (MHF_MASK                << MHF_SHIFT)
+#define SL                 (SL_MASK                 << SL_SHIFT)
+#define SS                 (SS_MASK                 << SS_SHIFT)
+#define MULTI              (MULTI_MASK              << MULTI_SHIFT)
+
+
+/* FSYNR0 */
+#define AMID               (AMID_MASK               << AMID_SHIFT)
+#define APID               (APID_MASK               << APID_SHIFT)
+#define ABID               (ABID_MASK               << ABID_SHIFT)
+#define ATID               (ATID_MASK               << ATID_SHIFT)
+
+
+/* FSYNR1 */
+#define AMEMTYPE           (AMEMTYPE_MASK           << AMEMTYPE_SHIFT)
+#define ASHARED            (ASHARED_MASK            << ASHARED_SHIFT)
+#define AINNERSHARED       (AINNERSHARED_MASK       << AINNERSHARED_SHIFT)
+#define APRIV              (APRIV_MASK              << APRIV_SHIFT)
+#define APROTNS            (APROTNS_MASK            << APROTNS_SHIFT)
+#define AINST              (AINST_MASK              << AINST_SHIFT)
+#define AWRITE             (AWRITE_MASK             << AWRITE_SHIFT)
+#define ABURST             (ABURST_MASK             << ABURST_SHIFT)
+#define ALEN               (ALEN_MASK               << ALEN_SHIFT)
+#define FSYNR1_ASIZE       (FSYNR1_ASIZE_MASK       << FSYNR1_ASIZE_SHIFT)
+#define ALOCK              (ALOCK_MASK              << ALOCK_SHIFT)
+#define AFULL              (AFULL_MASK              << AFULL_SHIFT)
+
+
+/* NMRR */
+#define ICPC0              (ICPC0_MASK              << ICPC0_SHIFT)
+#define ICPC1              (ICPC1_MASK              << ICPC1_SHIFT)
+#define ICPC2              (ICPC2_MASK              << ICPC2_SHIFT)
+#define ICPC3              (ICPC3_MASK              << ICPC3_SHIFT)
+#define ICPC4              (ICPC4_MASK              << ICPC4_SHIFT)
+#define ICPC5              (ICPC5_MASK              << ICPC5_SHIFT)
+#define ICPC6              (ICPC6_MASK              << ICPC6_SHIFT)
+#define ICPC7              (ICPC7_MASK              << ICPC7_SHIFT)
+#define OCPC0              (OCPC0_MASK              << OCPC0_SHIFT)
+#define OCPC1              (OCPC1_MASK              << OCPC1_SHIFT)
+#define OCPC2              (OCPC2_MASK              << OCPC2_SHIFT)
+#define OCPC3              (OCPC3_MASK              << OCPC3_SHIFT)
+#define OCPC4              (OCPC4_MASK              << OCPC4_SHIFT)
+#define OCPC5              (OCPC5_MASK              << OCPC5_SHIFT)
+#define OCPC6              (OCPC6_MASK              << OCPC6_SHIFT)
+#define OCPC7              (OCPC7_MASK              << OCPC7_SHIFT)
+
+
+/* PAR */
+#define FAULT              (FAULT_MASK              << FAULT_SHIFT)
+/* If a fault is present, these are the
+same as the fault fields in the FAR */
+#define FAULT_TF           (FAULT_TF_MASK           << FAULT_TF_SHIFT)
+#define FAULT_AFF          (FAULT_AFF_MASK          << FAULT_AFF_SHIFT)
+#define FAULT_APF          (FAULT_APF_MASK          << FAULT_APF_SHIFT)
+#define FAULT_TLBMF        (FAULT_TLBMF_MASK        << FAULT_TLBMF_SHIFT)
+#define FAULT_HTWDEEF      (FAULT_HTWDEEF_MASK      << FAULT_HTWDEEF_SHIFT)
+#define FAULT_HTWSEEF      (FAULT_HTWSEEF_MASK      << FAULT_HTWSEEF_SHIFT)
+#define FAULT_MHF          (FAULT_MHF_MASK          << FAULT_MHF_SHIFT)
+#define FAULT_SL           (FAULT_SL_MASK           << FAULT_SL_SHIFT)
+#define FAULT_SS           (FAULT_SS_MASK           << FAULT_SS_SHIFT)
+
+/* If NO fault is present, the following fields are in effect */
+/* (FAULT remains as before) */
+#define PAR_NOFAULT_SS     (PAR_NOFAULT_SS_MASK     << PAR_NOFAULT_SS_SHIFT)
+#define PAR_NOFAULT_MT     (PAR_NOFAULT_MT_MASK     << PAR_NOFAULT_MT_SHIFT)
+#define PAR_NOFAULT_SH     (PAR_NOFAULT_SH_MASK     << PAR_NOFAULT_SH_SHIFT)
+#define PAR_NOFAULT_NS     (PAR_NOFAULT_NS_MASK     << PAR_NOFAULT_NS_SHIFT)
+#define PAR_NOFAULT_NOS    (PAR_NOFAULT_NOS_MASK    << PAR_NOFAULT_NOS_SHIFT)
+#define PAR_NPFAULT_PA     (PAR_NPFAULT_PA_MASK     << PAR_NPFAULT_PA_SHIFT)
+
+
+/* PRRR */
+#define MTC0               (MTC0_MASK               << MTC0_SHIFT)
+#define MTC1               (MTC1_MASK               << MTC1_SHIFT)
+#define MTC2               (MTC2_MASK               << MTC2_SHIFT)
+#define MTC3               (MTC3_MASK               << MTC3_SHIFT)
+#define MTC4               (MTC4_MASK               << MTC4_SHIFT)
+#define MTC5               (MTC5_MASK               << MTC5_SHIFT)
+#define MTC6               (MTC6_MASK               << MTC6_SHIFT)
+#define MTC7               (MTC7_MASK               << MTC7_SHIFT)
+#define SHDSH0             (SHDSH0_MASK             << SHDSH0_SHIFT)
+#define SHDSH1             (SHDSH1_MASK             << SHDSH1_SHIFT)
+#define SHNMSH0            (SHNMSH0_MASK            << SHNMSH0_SHIFT)
+#define SHNMSH1            (SHNMSH1_MASK            << SHNMSH1_SHIFT)
+#define NOS0               (NOS0_MASK               << NOS0_SHIFT)
+#define NOS1               (NOS1_MASK               << NOS1_SHIFT)
+#define NOS2               (NOS2_MASK               << NOS2_SHIFT)
+#define NOS3               (NOS3_MASK               << NOS3_SHIFT)
+#define NOS4               (NOS4_MASK               << NOS4_SHIFT)
+#define NOS5               (NOS5_MASK               << NOS5_SHIFT)
+#define NOS6               (NOS6_MASK               << NOS6_SHIFT)
+#define NOS7               (NOS7_MASK               << NOS7_SHIFT)
+
+
+/* RESUME */
+#define TNR                (TNR_MASK                << TNR_SHIFT)
+
+
+/* SCTLR */
+#define M                  (M_MASK                  << M_SHIFT)
+#define TRE                (TRE_MASK                << TRE_SHIFT)
+#define AFE                (AFE_MASK                << AFE_SHIFT)
+#define HAF                (HAF_MASK                << HAF_SHIFT)
+#define BE                 (BE_MASK                 << BE_SHIFT)
+#define AFFD               (AFFD_MASK               << AFFD_SHIFT)
+
+
+/* TLBIASID */
+#define TLBIASID_ASID      (TLBIASID_ASID_MASK      << TLBIASID_ASID_SHIFT)
+
+
+/* TLBIVA */
+#define TLBIVA_ASID        (TLBIVA_ASID_MASK        << TLBIVA_ASID_SHIFT)
+#define TLBIVA_VA          (TLBIVA_VA_MASK          << TLBIVA_VA_SHIFT)
+
+
+/* TLBIVAA */
+#define TLBIVAA_VA         (TLBIVAA_VA_MASK         << TLBIVAA_VA_SHIFT)
+
+
+/* TLBLCKR */
+#define LKE                (LKE_MASK                << LKE_SHIFT)
+#define TLBLCKR_TLBIALLCFG (TLBLCKR_TLBIALLCFG_MASK<<TLBLCKR_TLBIALLCFG_SHIFT)
+#define TLBIASIDCFG        (TLBIASIDCFG_MASK        << TLBIASIDCFG_SHIFT)
+#define TLBIVAACFG         (TLBIVAACFG_MASK         << TLBIVAACFG_SHIFT)
+#define FLOOR              (FLOOR_MASK              << FLOOR_SHIFT)
+#define VICTIM             (VICTIM_MASK             << VICTIM_SHIFT)
+
+
+/* TTBCR */
+#define N                  (N_MASK                  << N_SHIFT)
+#define PD0                (PD0_MASK                << PD0_SHIFT)
+#define PD1                (PD1_MASK                << PD1_SHIFT)
+
+
+/* TTBR0 */
+#define TTBR0_IRGNH        (TTBR0_IRGNH_MASK        << TTBR0_IRGNH_SHIFT)
+#define TTBR0_SH           (TTBR0_SH_MASK           << TTBR0_SH_SHIFT)
+#define TTBR0_ORGN         (TTBR0_ORGN_MASK         << TTBR0_ORGN_SHIFT)
+#define TTBR0_NOS          (TTBR0_NOS_MASK          << TTBR0_NOS_SHIFT)
+#define TTBR0_IRGNL        (TTBR0_IRGNL_MASK        << TTBR0_IRGNL_SHIFT)
+#define TTBR0_PA           (TTBR0_PA_MASK           << TTBR0_PA_SHIFT)
+
+
+/* TTBR1 */
+#define TTBR1_IRGNH        (TTBR1_IRGNH_MASK        << TTBR1_IRGNH_SHIFT)
+#define TTBR1_SH           (TTBR1_SH_MASK           << TTBR1_SH_SHIFT)
+#define TTBR1_ORGN         (TTBR1_ORGN_MASK         << TTBR1_ORGN_SHIFT)
+#define TTBR1_NOS          (TTBR1_NOS_MASK          << TTBR1_NOS_SHIFT)
+#define TTBR1_IRGNL        (TTBR1_IRGNL_MASK        << TTBR1_IRGNL_SHIFT)
+#define TTBR1_PA           (TTBR1_PA_MASK           << TTBR1_PA_SHIFT)
+
+
+/* V2PSR */
+#define HIT                (HIT_MASK                << HIT_SHIFT)
+#define INDEX              (INDEX_MASK              << INDEX_SHIFT)
+
+
+/* V2Pxx */
+#define V2Pxx_INDEX        (V2Pxx_INDEX_MASK        << V2Pxx_INDEX_SHIFT)
+#define V2Pxx_VA           (V2Pxx_VA_MASK           << V2Pxx_VA_SHIFT)
+
+
+/* Global Register Masks */
+/* CBACRn */
+#define RWVMID_MASK               0x1F
+#define RWE_MASK                  0x01
+#define RWGE_MASK                 0x01
+#define CBVMID_MASK               0x1F
+#define IRPTNDX_MASK              0xFF
+
+
+/* CR */
+#define RPUE_MASK                 0x01
+#define RPUERE_MASK               0x01
+#define RPUEIE_MASK               0x01
+#define DCDEE_MASK                0x01
+#define CLIENTPD_MASK             0x01
+#define STALLD_MASK               0x01
+#define TLBLKCRWE_MASK            0x01
+#define CR_TLBIALLCFG_MASK        0x01
+#define TLBIVMIDCFG_MASK          0x01
+#define CR_HUME_MASK              0x01
+
+
+/* ESR */
+#define CFG_MASK                  0x01
+#define BYPASS_MASK               0x01
+#define ESR_MULTI_MASK            0x01
+
+
+/* ESYNR0 */
+#define ESYNR0_AMID_MASK          0xFF
+#define ESYNR0_APID_MASK          0x1F
+#define ESYNR0_ABID_MASK          0x07
+#define ESYNR0_AVMID_MASK         0x1F
+#define ESYNR0_ATID_MASK          0xFF
+
+
+/* ESYNR1 */
+#define ESYNR1_AMEMTYPE_MASK             0x07
+#define ESYNR1_ASHARED_MASK              0x01
+#define ESYNR1_AINNERSHARED_MASK         0x01
+#define ESYNR1_APRIV_MASK                0x01
+#define ESYNR1_APROTNS_MASK              0x01
+#define ESYNR1_AINST_MASK                0x01
+#define ESYNR1_AWRITE_MASK               0x01
+#define ESYNR1_ABURST_MASK               0x01
+#define ESYNR1_ALEN_MASK                 0x0F
+#define ESYNR1_ASIZE_MASK                0x01
+#define ESYNR1_ALOCK_MASK                0x03
+#define ESYNR1_AOOO_MASK                 0x01
+#define ESYNR1_AFULL_MASK                0x01
+#define ESYNR1_AC_MASK                   0x01
+#define ESYNR1_DCD_MASK                  0x01
+
+
+/* IDR */
+#define NM2VCBMT_MASK             0x1FF
+#define HTW_MASK                  0x01
+#define HUM_MASK                  0x01
+#define TLBSIZE_MASK              0x0F
+#define NCB_MASK                  0xFF
+#define NIRPT_MASK                0xFF
+
+
+/* M2VCBRn */
+#define VMID_MASK                 0x1F
+#define CBNDX_MASK                0xFF
+#define BYPASSD_MASK              0x01
+#define BPRCOSH_MASK              0x01
+#define BPRCISH_MASK              0x01
+#define BPRCNSH_MASK              0x01
+#define BPSHCFG_MASK              0x03
+#define NSCFG_MASK                0x03
+#define BPMTCFG_MASK              0x01
+#define BPMEMTYPE_MASK            0x07
+
+
+/* REV */
+#define MINOR_MASK                0x0F
+#define MAJOR_MASK                0x0F
+
+
+/* TESTBUSCR */
+#define TBE_MASK                  0x01
+#define SPDMBE_MASK               0x01
+#define WGSEL_MASK                0x03
+#define TBLSEL_MASK               0x03
+#define TBHSEL_MASK               0x03
+#define SPDM0SEL_MASK             0x0F
+#define SPDM1SEL_MASK             0x0F
+#define SPDM2SEL_MASK             0x0F
+#define SPDM3SEL_MASK             0x0F
+
+
+/* TLBIMID */
+#define TLBIVMID_VMID_MASK        0x1F
+
+
+/* TLBRSW */
+#define TLBRSW_INDEX_MASK         0xFF
+#define TLBBFBS_MASK              0x03
+
+
+/* TLBTR0 */
+#define PR_MASK                   0x01
+#define PW_MASK                   0x01
+#define UR_MASK                   0x01
+#define UW_MASK                   0x01
+#define XN_MASK                   0x01
+#define NSDESC_MASK               0x01
+#define ISH_MASK                  0x01
+#define SH_MASK                   0x01
+#define MT_MASK                   0x07
+#define DPSIZR_MASK               0x07
+#define DPSIZC_MASK               0x07
+
+
+/* TLBTR1 */
+#define TLBTR1_VMID_MASK          0x1F
+#define TLBTR1_PA_MASK            0x000FFFFF
+
+
+/* TLBTR2 */
+#define TLBTR2_ASID_MASK          0xFF
+#define TLBTR2_V_MASK             0x01
+#define TLBTR2_NSTID_MASK         0x01
+#define TLBTR2_NV_MASK            0x01
+#define TLBTR2_VA_MASK            0x000FFFFF
+
+
+/* Global Register Shifts */
+/* CBACRn */
+#define RWVMID_SHIFT             0
+#define RWE_SHIFT                8
+#define RWGE_SHIFT               9
+#define CBVMID_SHIFT             16
+#define IRPTNDX_SHIFT            24
+
+
+/* CR */
+#define RPUE_SHIFT               0
+#define RPUERE_SHIFT             1
+#define RPUEIE_SHIFT             2
+#define DCDEE_SHIFT              3
+#define CLIENTPD_SHIFT           4
+#define STALLD_SHIFT             5
+#define TLBLKCRWE_SHIFT          6
+#define CR_TLBIALLCFG_SHIFT      7
+#define TLBIVMIDCFG_SHIFT        8
+#define CR_HUME_SHIFT            9
+
+
+/* ESR */
+#define CFG_SHIFT                0
+#define BYPASS_SHIFT             1
+#define ESR_MULTI_SHIFT          31
+
+
+/* ESYNR0 */
+#define ESYNR0_AMID_SHIFT        0
+#define ESYNR0_APID_SHIFT        8
+#define ESYNR0_ABID_SHIFT        13
+#define ESYNR0_AVMID_SHIFT       16
+#define ESYNR0_ATID_SHIFT        24
+
+
+/* ESYNR1 */
+#define ESYNR1_AMEMTYPE_SHIFT           0
+#define ESYNR1_ASHARED_SHIFT            3
+#define ESYNR1_AINNERSHARED_SHIFT       4
+#define ESYNR1_APRIV_SHIFT              5
+#define ESYNR1_APROTNS_SHIFT            6
+#define ESYNR1_AINST_SHIFT              7
+#define ESYNR1_AWRITE_SHIFT             8
+#define ESYNR1_ABURST_SHIFT             10
+#define ESYNR1_ALEN_SHIFT               12
+#define ESYNR1_ASIZE_SHIFT              16
+#define ESYNR1_ALOCK_SHIFT              20
+#define ESYNR1_AOOO_SHIFT               22
+#define ESYNR1_AFULL_SHIFT              24
+#define ESYNR1_AC_SHIFT                 30
+#define ESYNR1_DCD_SHIFT                31
+
+
+/* IDR */
+#define NM2VCBMT_SHIFT           0
+#define HTW_SHIFT                9
+#define HUM_SHIFT                10
+#define TLBSIZE_SHIFT            12
+#define NCB_SHIFT                16
+#define NIRPT_SHIFT              24
+
+
+/* M2VCBRn */
+#define VMID_SHIFT               0
+#define CBNDX_SHIFT              8
+#define BYPASSD_SHIFT            16
+#define BPRCOSH_SHIFT            17
+#define BPRCISH_SHIFT            18
+#define BPRCNSH_SHIFT            19
+#define BPSHCFG_SHIFT            20
+#define NSCFG_SHIFT              22
+#define BPMTCFG_SHIFT            24
+#define BPMEMTYPE_SHIFT          25
+
+
+/* REV */
+#define MINOR_SHIFT              0
+#define MAJOR_SHIFT              4
+
+
+/* TESTBUSCR */
+#define TBE_SHIFT                0
+#define SPDMBE_SHIFT             1
+#define WGSEL_SHIFT              8
+#define TBLSEL_SHIFT             12
+#define TBHSEL_SHIFT             14
+#define SPDM0SEL_SHIFT           16
+#define SPDM1SEL_SHIFT           20
+#define SPDM2SEL_SHIFT           24
+#define SPDM3SEL_SHIFT           28
+
+
+/* TLBIMID */
+#define TLBIVMID_VMID_SHIFT      0
+
+
+/* TLBRSW */
+#define TLBRSW_INDEX_SHIFT       0
+#define TLBBFBS_SHIFT            8
+
+
+/* TLBTR0 */
+#define PR_SHIFT                 0
+#define PW_SHIFT                 1
+#define UR_SHIFT                 2
+#define UW_SHIFT                 3
+#define XN_SHIFT                 4
+#define NSDESC_SHIFT             6
+#define ISH_SHIFT                7
+#define SH_SHIFT                 8
+#define MT_SHIFT                 9
+#define DPSIZR_SHIFT             16
+#define DPSIZC_SHIFT             20
+
+
+/* TLBTR1 */
+#define TLBTR1_VMID_SHIFT        0
+#define TLBTR1_PA_SHIFT          12
+
+
+/* TLBTR2 */
+#define TLBTR2_ASID_SHIFT        0
+#define TLBTR2_V_SHIFT           8
+#define TLBTR2_NSTID_SHIFT       9
+#define TLBTR2_NV_SHIFT          10
+#define TLBTR2_VA_SHIFT          12
+
+
+/* Context Register Masks */
+/* ACTLR */
+#define CFERE_MASK                       0x01
+#define CFEIE_MASK                       0x01
+#define PTSHCFG_MASK                     0x03
+#define RCOSH_MASK                       0x01
+#define RCISH_MASK                       0x01
+#define RCNSH_MASK                       0x01
+#define PRIVCFG_MASK                     0x03
+#define DNA_MASK                         0x01
+#define DNLV2PA_MASK                     0x01
+#define TLBMCFG_MASK                     0x03
+#define CFCFG_MASK                       0x01
+#define TIPCF_MASK                       0x01
+#define V2PCFG_MASK                      0x03
+#define HUME_MASK                        0x01
+#define PTMTCFG_MASK                     0x01
+#define PTMEMTYPE_MASK                   0x07
+
+
+/* BFBCR */
+#define BFBDFE_MASK                      0x01
+#define BFBSFE_MASK                      0x01
+#define SFVS_MASK                        0x01
+#define FLVIC_MASK                       0x0F
+#define SLVIC_MASK                       0x0F
+
+
+/* CONTEXTIDR */
+#define CONTEXTIDR_ASID_MASK             0xFF
+#define PROCID_MASK                      0x00FFFFFF
+
+
+/* FSR */
+#define TF_MASK                          0x01
+#define AFF_MASK                         0x01
+#define APF_MASK                         0x01
+#define TLBMF_MASK                       0x01
+#define HTWDEEF_MASK                     0x01
+#define HTWSEEF_MASK                     0x01
+#define MHF_MASK                         0x01
+#define SL_MASK                          0x01
+#define SS_MASK                          0x01
+#define MULTI_MASK                       0x01
+
+
+/* FSYNR0 */
+#define AMID_MASK                        0xFF
+#define APID_MASK                        0x1F
+#define ABID_MASK                        0x07
+#define ATID_MASK                        0xFF
+
+
+/* FSYNR1 */
+#define AMEMTYPE_MASK                    0x07
+#define ASHARED_MASK                     0x01
+#define AINNERSHARED_MASK                0x01
+#define APRIV_MASK                       0x01
+#define APROTNS_MASK                     0x01
+#define AINST_MASK                       0x01
+#define AWRITE_MASK                      0x01
+#define ABURST_MASK                      0x01
+#define ALEN_MASK                        0x0F
+#define FSYNR1_ASIZE_MASK                0x07
+#define ALOCK_MASK                       0x03
+#define AFULL_MASK                       0x01
+
+
+/* NMRR */
+#define ICPC0_MASK                       0x03
+#define ICPC1_MASK                       0x03
+#define ICPC2_MASK                       0x03
+#define ICPC3_MASK                       0x03
+#define ICPC4_MASK                       0x03
+#define ICPC5_MASK                       0x03
+#define ICPC6_MASK                       0x03
+#define ICPC7_MASK                       0x03
+#define OCPC0_MASK                       0x03
+#define OCPC1_MASK                       0x03
+#define OCPC2_MASK                       0x03
+#define OCPC3_MASK                       0x03
+#define OCPC4_MASK                       0x03
+#define OCPC5_MASK                       0x03
+#define OCPC6_MASK                       0x03
+#define OCPC7_MASK                       0x03
+
+
+/* PAR */
+#define FAULT_MASK                       0x01
+/* If a fault is present, these are the
+same as the fault fields in the FAR */
+#define FAULT_TF_MASK                    0x01
+#define FAULT_AFF_MASK                   0x01
+#define FAULT_APF_MASK                   0x01
+#define FAULT_TLBMF_MASK                 0x01
+#define FAULT_HTWDEEF_MASK               0x01
+#define FAULT_HTWSEEF_MASK               0x01
+#define FAULT_MHF_MASK                   0x01
+#define FAULT_SL_MASK                    0x01
+#define FAULT_SS_MASK                    0x01
+
+/* If NO fault is present, the following
+ * fields are in effect
+ * (FAULT remains as before) */
+#define PAR_NOFAULT_SS_MASK              0x01
+#define PAR_NOFAULT_MT_MASK              0x07
+#define PAR_NOFAULT_SH_MASK              0x01
+#define PAR_NOFAULT_NS_MASK              0x01
+#define PAR_NOFAULT_NOS_MASK             0x01
+#define PAR_NPFAULT_PA_MASK              0x000FFFFF
+
+
+/* PRRR */
+#define MTC0_MASK                        0x03
+#define MTC1_MASK                        0x03
+#define MTC2_MASK                        0x03
+#define MTC3_MASK                        0x03
+#define MTC4_MASK                        0x03
+#define MTC5_MASK                        0x03
+#define MTC6_MASK                        0x03
+#define MTC7_MASK                        0x03
+#define SHDSH0_MASK                      0x01
+#define SHDSH1_MASK                      0x01
+#define SHNMSH0_MASK                     0x01
+#define SHNMSH1_MASK                     0x01
+#define NOS0_MASK                        0x01
+#define NOS1_MASK                        0x01
+#define NOS2_MASK                        0x01
+#define NOS3_MASK                        0x01
+#define NOS4_MASK                        0x01
+#define NOS5_MASK                        0x01
+#define NOS6_MASK                        0x01
+#define NOS7_MASK                        0x01
+
+
+/* RESUME */
+#define TNR_MASK                         0x01
+
+
+/* SCTLR */
+#define M_MASK                           0x01
+#define TRE_MASK                         0x01
+#define AFE_MASK                         0x01
+#define HAF_MASK                         0x01
+#define BE_MASK                          0x01
+#define AFFD_MASK                        0x01
+
+
+/* TLBIASID */
+#define TLBIASID_ASID_MASK               0xFF
+
+
+/* TLBIVA */
+#define TLBIVA_ASID_MASK                 0xFF
+#define TLBIVA_VA_MASK                   0x000FFFFF
+
+
+/* TLBIVAA */
+#define TLBIVAA_VA_MASK                  0x000FFFFF
+
+
+/* TLBLCKR */
+#define LKE_MASK                         0x01
+#define TLBLCKR_TLBIALLCFG_MASK          0x01
+#define TLBIASIDCFG_MASK                 0x01
+#define TLBIVAACFG_MASK                  0x01
+#define FLOOR_MASK                       0xFF
+#define VICTIM_MASK                      0xFF
+
+
+/* TTBCR */
+#define N_MASK                           0x07
+#define PD0_MASK                         0x01
+#define PD1_MASK                         0x01
+
+
+/* TTBR0 */
+#define TTBR0_IRGNH_MASK                 0x01
+#define TTBR0_SH_MASK                    0x01
+#define TTBR0_ORGN_MASK                  0x03
+#define TTBR0_NOS_MASK                   0x01
+#define TTBR0_IRGNL_MASK                 0x01
+#define TTBR0_PA_MASK                    0x0003FFFF
+
+
+/* TTBR1 */
+#define TTBR1_IRGNH_MASK                 0x01
+#define TTBR1_SH_MASK                    0x01
+#define TTBR1_ORGN_MASK                  0x03
+#define TTBR1_NOS_MASK                   0x01
+#define TTBR1_IRGNL_MASK                 0x01
+#define TTBR1_PA_MASK                    0x0003FFFF
+
+
+/* V2PSR */
+#define HIT_MASK                         0x01
+#define INDEX_MASK                       0xFF
+
+
+/* V2Pxx */
+#define V2Pxx_INDEX_MASK                 0xFF
+#define V2Pxx_VA_MASK                    0x000FFFFF
+
+
+/* Context Register Shifts */
+/* ACTLR */
+#define CFERE_SHIFT                    0
+#define CFEIE_SHIFT                    1
+#define PTSHCFG_SHIFT                  2
+#define RCOSH_SHIFT                    4
+#define RCISH_SHIFT                    5
+#define RCNSH_SHIFT                    6
+#define PRIVCFG_SHIFT                  8
+#define DNA_SHIFT                      10
+#define DNLV2PA_SHIFT                  11
+#define TLBMCFG_SHIFT                  12
+#define CFCFG_SHIFT                    14
+#define TIPCF_SHIFT                    15
+#define V2PCFG_SHIFT                   16
+#define HUME_SHIFT                     18
+#define PTMTCFG_SHIFT                  20
+#define PTMEMTYPE_SHIFT                21
+
+
+/* BFBCR */
+#define BFBDFE_SHIFT                   0
+#define BFBSFE_SHIFT                   1
+#define SFVS_SHIFT                     2
+#define FLVIC_SHIFT                    4
+#define SLVIC_SHIFT                    8
+
+
+/* CONTEXTIDR */
+#define CONTEXTIDR_ASID_SHIFT          0
+#define PROCID_SHIFT                   8
+
+
+/* FSR */
+#define TF_SHIFT                       1
+#define AFF_SHIFT                      2
+#define APF_SHIFT                      3
+#define TLBMF_SHIFT                    4
+#define HTWDEEF_SHIFT                  5
+#define HTWSEEF_SHIFT                  6
+#define MHF_SHIFT                      7
+#define SL_SHIFT                       16
+#define SS_SHIFT                       30
+#define MULTI_SHIFT                    31
+
+
+/* FSYNR0 */
+#define AMID_SHIFT                     0
+#define APID_SHIFT                     8
+#define ABID_SHIFT                     13
+#define ATID_SHIFT                     24
+
+
+/* FSYNR1 */
+#define AMEMTYPE_SHIFT                 0
+#define ASHARED_SHIFT                  3
+#define AINNERSHARED_SHIFT             4
+#define APRIV_SHIFT                    5
+#define APROTNS_SHIFT                  6
+#define AINST_SHIFT                    7
+#define AWRITE_SHIFT                   8
+#define ABURST_SHIFT                   10
+#define ALEN_SHIFT                     12
+#define FSYNR1_ASIZE_SHIFT             16
+#define ALOCK_SHIFT                    20
+#define AFULL_SHIFT                    24
+
+
+/* NMRR */
+#define ICPC0_SHIFT                    0
+#define ICPC1_SHIFT                    2
+#define ICPC2_SHIFT                    4
+#define ICPC3_SHIFT                    6
+#define ICPC4_SHIFT                    8
+#define ICPC5_SHIFT                    10
+#define ICPC6_SHIFT                    12
+#define ICPC7_SHIFT                    14
+#define OCPC0_SHIFT                    16
+#define OCPC1_SHIFT                    18
+#define OCPC2_SHIFT                    20
+#define OCPC3_SHIFT                    22
+#define OCPC4_SHIFT                    24
+#define OCPC5_SHIFT                    26
+#define OCPC6_SHIFT                    28
+#define OCPC7_SHIFT                    30
+
+
+/* PAR */
+#define FAULT_SHIFT                    0
+/* If a fault is present, these are the
+same as the fault fields in the FAR */
+#define FAULT_TF_SHIFT                 1
+#define FAULT_AFF_SHIFT                2
+#define FAULT_APF_SHIFT                3
+#define FAULT_TLBMF_SHIFT              4
+#define FAULT_HTWDEEF_SHIFT            5
+#define FAULT_HTWSEEF_SHIFT            6
+#define FAULT_MHF_SHIFT                7
+#define FAULT_SL_SHIFT                 16
+#define FAULT_SS_SHIFT                 30
+
+/* If NO fault is present, the following
+ * fields are in effect
+ * (FAULT remains as before) */
+#define PAR_NOFAULT_SS_SHIFT           1
+#define PAR_NOFAULT_MT_SHIFT           4
+#define PAR_NOFAULT_SH_SHIFT           7
+#define PAR_NOFAULT_NS_SHIFT           9
+#define PAR_NOFAULT_NOS_SHIFT          10
+#define PAR_NPFAULT_PA_SHIFT           12
+
+
+/* PRRR */
+#define MTC0_SHIFT                     0
+#define MTC1_SHIFT                     2
+#define MTC2_SHIFT                     4
+#define MTC3_SHIFT                     6
+#define MTC4_SHIFT                     8
+#define MTC5_SHIFT                     10
+#define MTC6_SHIFT                     12
+#define MTC7_SHIFT                     14
+#define SHDSH0_SHIFT                   16
+#define SHDSH1_SHIFT                   17
+#define SHNMSH0_SHIFT                  18
+#define SHNMSH1_SHIFT                  19
+#define NOS0_SHIFT                     24
+#define NOS1_SHIFT                     25
+#define NOS2_SHIFT                     26
+#define NOS3_SHIFT                     27
+#define NOS4_SHIFT                     28
+#define NOS5_SHIFT                     29
+#define NOS6_SHIFT                     30
+#define NOS7_SHIFT                     31
+
+
+/* RESUME */
+#define TNR_SHIFT                      0
+
+
+/* SCTLR */
+#define M_SHIFT                        0
+#define TRE_SHIFT                      1
+#define AFE_SHIFT                      2
+#define HAF_SHIFT                      3
+#define BE_SHIFT                       4
+#define AFFD_SHIFT                     5
+
+
+/* TLBIASID */
+#define TLBIASID_ASID_SHIFT            0
+
+
+/* TLBIVA */
+#define TLBIVA_ASID_SHIFT              0
+#define TLBIVA_VA_SHIFT                12
+
+
+/* TLBIVAA */
+#define TLBIVAA_VA_SHIFT               12
+
+
+/* TLBLCKR */
+#define LKE_SHIFT                      0
+#define TLBLCKR_TLBIALLCFG_SHIFT       1
+#define TLBIASIDCFG_SHIFT              2
+#define TLBIVAACFG_SHIFT               3
+#define FLOOR_SHIFT                    8
+#define VICTIM_SHIFT                   8
+
+
+/* TTBCR */
+#define N_SHIFT                        3
+#define PD0_SHIFT                      4
+#define PD1_SHIFT                      5
+
+
+/* TTBR0 */
+#define TTBR0_IRGNH_SHIFT              0
+#define TTBR0_SH_SHIFT                 1
+#define TTBR0_ORGN_SHIFT               3
+#define TTBR0_NOS_SHIFT                5
+#define TTBR0_IRGNL_SHIFT              6
+#define TTBR0_PA_SHIFT                 14
+
+
+/* TTBR1 */
+#define TTBR1_IRGNH_SHIFT              0
+#define TTBR1_SH_SHIFT                 1
+#define TTBR1_ORGN_SHIFT               3
+#define TTBR1_NOS_SHIFT                5
+#define TTBR1_IRGNL_SHIFT              6
+#define TTBR1_PA_SHIFT                 14
+
+
+/* V2PSR */
+#define HIT_SHIFT                      0
+#define INDEX_SHIFT                    8
+
+
+/* V2Pxx */
+#define V2Pxx_INDEX_SHIFT              0
+#define V2Pxx_VA_SHIFT                 12
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs-8x60.h b/arch/arm/mach-msm/include/mach/irqs-8x60.h
new file mode 100644
index 000000000000..36074cfc9ad2
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/irqs-8x60.h
@@ -0,0 +1,253 @@
+/* Copyright (c) 2010 Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_8X60_H
+#define __ASM_ARCH_MSM_IRQS_8X60_H
+
+/* MSM ACPU Interrupt Numbers */
+
+/* 0-15:  STI/SGI (software triggered/generated interrupts)
+ * 16-31: PPI (private peripheral interrupts)
+ * 32+:   SPI (shared peripheral interrupts)
+ */
+
+#define GIC_PPI_START 16
+#define GIC_SPI_START 32
+
+#define INT_DEBUG_TIMER_EXP			(GIC_PPI_START + 0)
+#define INT_GP_TIMER_EXP			(GIC_PPI_START + 1)
+#define INT_GP_TIMER2_EXP			(GIC_PPI_START + 2)
+#define WDT0_ACCSCSSNBARK_INT			(GIC_PPI_START + 3)
+#define WDT1_ACCSCSSNBARK_INT			(GIC_PPI_START + 4)
+#define AVS_SVICINT				(GIC_PPI_START + 5)
+#define AVS_SVICINTSWDONE			(GIC_PPI_START + 6)
+#define CPU_DBGCPUXCOMMRXFULL			(GIC_PPI_START + 7)
+#define CPU_DBGCPUXCOMMTXEMPTY			(GIC_PPI_START + 8)
+#define CPU_SICCPUXPERFMONIRPTREQ		(GIC_PPI_START + 9)
+#define SC_AVSCPUXDOWN				(GIC_PPI_START + 10)
+#define SC_AVSCPUXUP				(GIC_PPI_START + 11)
+#define SC_SICCPUXACGIRPTREQ			(GIC_PPI_START + 12)
+/* PPI 13 to 15 are unused */
+
+
+#define SC_SICMPUIRPTREQ			(GIC_SPI_START + 0)
+#define SC_SICL2IRPTREQ				(GIC_SPI_START + 1)
+#define SC_SICL2ACGIRPTREQ			(GIC_SPI_START + 2)
+#define NC					(GIC_SPI_START + 3)
+#define TLMM_SCSS_DIR_CONN_IRQ_0		(GIC_SPI_START + 4)
+#define TLMM_SCSS_DIR_CONN_IRQ_1		(GIC_SPI_START + 5)
+#define TLMM_SCSS_DIR_CONN_IRQ_2		(GIC_SPI_START + 6)
+#define TLMM_SCSS_DIR_CONN_IRQ_3		(GIC_SPI_START + 7)
+#define TLMM_SCSS_DIR_CONN_IRQ_4		(GIC_SPI_START + 8)
+#define TLMM_SCSS_DIR_CONN_IRQ_5		(GIC_SPI_START + 9)
+#define TLMM_SCSS_DIR_CONN_IRQ_6		(GIC_SPI_START + 10)
+#define TLMM_SCSS_DIR_CONN_IRQ_7		(GIC_SPI_START + 11)
+#define TLMM_SCSS_DIR_CONN_IRQ_8		(GIC_SPI_START + 12)
+#define TLMM_SCSS_DIR_CONN_IRQ_9		(GIC_SPI_START + 13)
+#define PM8058_SEC_IRQ_N			(GIC_SPI_START + 14)
+#define PM8901_SEC_IRQ_N			(GIC_SPI_START + 15)
+#define TLMM_SCSS_SUMMARY_IRQ			(GIC_SPI_START + 16)
+#define SPDM_RT_1_IRQ				(GIC_SPI_START + 17)
+#define SPDM_DIAG_IRQ				(GIC_SPI_START + 18)
+#define RPM_SCSS_CPU0_GP_HIGH_IRQ		(GIC_SPI_START + 19)
+#define RPM_SCSS_CPU0_GP_MEDIUM_IRQ		(GIC_SPI_START + 20)
+#define RPM_SCSS_CPU0_GP_LOW_IRQ		(GIC_SPI_START + 21)
+#define RPM_SCSS_CPU0_WAKE_UP_IRQ		(GIC_SPI_START + 22)
+#define RPM_SCSS_CPU1_GP_HIGH_IRQ		(GIC_SPI_START + 23)
+#define RPM_SCSS_CPU1_GP_MEDIUM_IRQ		(GIC_SPI_START + 24)
+#define RPM_SCSS_CPU1_GP_LOW_IRQ		(GIC_SPI_START + 25)
+#define RPM_SCSS_CPU1_WAKE_UP_IRQ		(GIC_SPI_START + 26)
+#define SSBI2_2_SC_CPU0_SECURE_INT		(GIC_SPI_START + 27)
+#define SSBI2_2_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 28)
+#define SSBI2_1_SC_CPU0_SECURE_INT		(GIC_SPI_START + 29)
+#define SSBI2_1_SC_CPU0_NON_SECURE_INT		(GIC_SPI_START + 30)
+#define MSMC_SC_SEC_CE_IRQ			(GIC_SPI_START + 31)
+#define MSMC_SC_PRI_CE_IRQ			(GIC_SPI_START + 32)
+#define MARM_FIQ				(GIC_SPI_START + 33)
+#define MARM_IRQ				(GIC_SPI_START + 34)
+#define MARM_L2CC_IRQ				(GIC_SPI_START + 35)
+#define MARM_WDOG_EXPIRED			(GIC_SPI_START + 36)
+#define MARM_SCSS_GP_IRQ_0			(GIC_SPI_START + 37)
+#define MARM_SCSS_GP_IRQ_1			(GIC_SPI_START + 38)
+#define MARM_SCSS_GP_IRQ_2			(GIC_SPI_START + 39)
+#define MARM_SCSS_GP_IRQ_3			(GIC_SPI_START + 40)
+#define MARM_SCSS_GP_IRQ_4			(GIC_SPI_START + 41)
+#define MARM_SCSS_GP_IRQ_5			(GIC_SPI_START + 42)
+#define MARM_SCSS_GP_IRQ_6			(GIC_SPI_START + 43)
+#define MARM_SCSS_GP_IRQ_7			(GIC_SPI_START + 44)
+#define MARM_SCSS_GP_IRQ_8			(GIC_SPI_START + 45)
+#define MARM_SCSS_GP_IRQ_9			(GIC_SPI_START + 46)
+#define VPE_IRQ					(GIC_SPI_START + 47)
+#define VFE_IRQ					(GIC_SPI_START + 48)
+#define VCODEC_IRQ				(GIC_SPI_START + 49)
+#define TV_ENC_IRQ				(GIC_SPI_START + 50)
+#define SMMU_VPE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 51)
+#define SMMU_VPE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 52)
+#define SMMU_VFE_CB_SC_SECURE_IRQ		(GIC_SPI_START + 53)
+#define SMMU_VFE_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 54)
+#define SMMU_VCODEC_B_CB_SC_SECURE_IRQ		(GIC_SPI_START + 55)
+#define SMMU_VCODEC_B_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 56)
+#define SMMU_VCODEC_A_CB_SC_SECURE_IRQ		(GIC_SPI_START + 57)
+#define SMMU_VCODEC_A_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 58)
+#define SMMU_ROT_CB_SC_SECURE_IRQ		(GIC_SPI_START + 59)
+#define SMMU_ROT_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 60)
+#define SMMU_MDP1_CB_SC_SECURE_IRQ		(GIC_SPI_START + 61)
+#define SMMU_MDP1_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 62)
+#define SMMU_MDP0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 63)
+#define SMMU_MDP0_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 64)
+#define SMMU_JPEGD_CB_SC_SECURE_IRQ		(GIC_SPI_START + 65)
+#define SMMU_JPEGD_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 66)
+#define SMMU_IJPEG_CB_SC_SECURE_IRQ		(GIC_SPI_START + 67)
+#define SMMU_IJPEG_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 68)
+#define SMMU_GFX3D_CB_SC_SECURE_IRQ		(GIC_SPI_START + 69)
+#define SMMU_GFX3D_CB_SC_NON_SECURE_IRQ		(GIC_SPI_START + 70)
+#define SMMU_GFX2D0_CB_SC_SECURE_IRQ		(GIC_SPI_START + 71)
+#define SMMU_GFX2D0_CB_SC_NON_SECURE_IRQ	(GIC_SPI_START + 72)
+#define ROT_IRQ					(GIC_SPI_START + 73)
+#define MMSS_FABRIC_IRQ				(GIC_SPI_START + 74)
+#define MDP_IRQ					(GIC_SPI_START + 75)
+#define JPEGD_IRQ				(GIC_SPI_START + 76)
+#define JPEG_IRQ				(GIC_SPI_START + 77)
+#define MMSS_IMEM_IRQ				(GIC_SPI_START + 78)
+#define HDMI_IRQ				(GIC_SPI_START + 79)
+#define GFX3D_IRQ				(GIC_SPI_START + 80)
+#define GFX2D0_IRQ				(GIC_SPI_START + 81)
+#define DSI_IRQ					(GIC_SPI_START + 82)
+#define CSI_1_IRQ				(GIC_SPI_START + 83)
+#define CSI_0_IRQ				(GIC_SPI_START + 84)
+#define LPASS_SCSS_AUDIO_IF_OUT0_IRQ		(GIC_SPI_START + 85)
+#define LPASS_SCSS_MIDI_IRQ			(GIC_SPI_START + 86)
+#define LPASS_Q6SS_WDOG_EXPIRED			(GIC_SPI_START + 87)
+#define LPASS_SCSS_GP_LOW_IRQ			(GIC_SPI_START + 88)
+#define LPASS_SCSS_GP_MEDIUM_IRQ		(GIC_SPI_START + 89)
+#define LPASS_SCSS_GP_HIGH_IRQ			(GIC_SPI_START + 90)
+#define TOP_IMEM_IRQ				(GIC_SPI_START + 91)
+#define FABRIC_SYS_IRQ				(GIC_SPI_START + 92)
+#define FABRIC_APPS_IRQ				(GIC_SPI_START + 93)
+#define USB1_HS_BAM_IRQ				(GIC_SPI_START + 94)
+#define SDC4_BAM_IRQ				(GIC_SPI_START + 95)
+#define SDC3_BAM_IRQ				(GIC_SPI_START + 96)
+#define SDC2_BAM_IRQ				(GIC_SPI_START + 97)
+#define SDC1_BAM_IRQ				(GIC_SPI_START + 98)
+#define FABRIC_SPS_IRQ				(GIC_SPI_START + 99)
+#define USB1_HS_IRQ				(GIC_SPI_START + 100)
+#define SDC4_IRQ_0				(GIC_SPI_START + 101)
+#define SDC3_IRQ_0				(GIC_SPI_START + 102)
+#define SDC2_IRQ_0				(GIC_SPI_START + 103)
+#define SDC1_IRQ_0				(GIC_SPI_START + 104)
+#define SPS_BAM_DMA_IRQ				(GIC_SPI_START + 105)
+#define SPS_SEC_VIOL_IRQ			(GIC_SPI_START + 106)
+#define SPS_MTI_0				(GIC_SPI_START + 107)
+#define SPS_MTI_1				(GIC_SPI_START + 108)
+#define SPS_MTI_2				(GIC_SPI_START + 109)
+#define SPS_MTI_3				(GIC_SPI_START + 110)
+#define SPS_MTI_4				(GIC_SPI_START + 111)
+#define SPS_MTI_5				(GIC_SPI_START + 112)
+#define SPS_MTI_6				(GIC_SPI_START + 113)
+#define SPS_MTI_7				(GIC_SPI_START + 114)
+#define SPS_MTI_8				(GIC_SPI_START + 115)
+#define SPS_MTI_9				(GIC_SPI_START + 116)
+#define SPS_MTI_10				(GIC_SPI_START + 117)
+#define SPS_MTI_11				(GIC_SPI_START + 118)
+#define SPS_MTI_12				(GIC_SPI_START + 119)
+#define SPS_MTI_13				(GIC_SPI_START + 120)
+#define SPS_MTI_14				(GIC_SPI_START + 121)
+#define SPS_MTI_15				(GIC_SPI_START + 122)
+#define SPS_MTI_16				(GIC_SPI_START + 123)
+#define SPS_MTI_17				(GIC_SPI_START + 124)
+#define SPS_MTI_18				(GIC_SPI_START + 125)
+#define SPS_MTI_19				(GIC_SPI_START + 126)
+#define SPS_MTI_20				(GIC_SPI_START + 127)
+#define SPS_MTI_21				(GIC_SPI_START + 128)
+#define SPS_MTI_22				(GIC_SPI_START + 129)
+#define SPS_MTI_23				(GIC_SPI_START + 130)
+#define SPS_MTI_24				(GIC_SPI_START + 131)
+#define SPS_MTI_25				(GIC_SPI_START + 132)
+#define SPS_MTI_26				(GIC_SPI_START + 133)
+#define SPS_MTI_27				(GIC_SPI_START + 134)
+#define SPS_MTI_28				(GIC_SPI_START + 135)
+#define SPS_MTI_29				(GIC_SPI_START + 136)
+#define SPS_MTI_30				(GIC_SPI_START + 137)
+#define SPS_MTI_31				(GIC_SPI_START + 138)
+#define UXMC_EBI2_WR_ER_DONE_IRQ		(GIC_SPI_START + 139)
+#define UXMC_EBI2_OP_DONE_IRQ			(GIC_SPI_START + 140)
+#define USB2_IRQ				(GIC_SPI_START + 141)
+#define USB1_IRQ				(GIC_SPI_START + 142)
+#define TSSC_SSBI_IRQ				(GIC_SPI_START + 143)
+#define TSSC_SAMPLE_IRQ				(GIC_SPI_START + 144)
+#define TSSC_PENUP_IRQ				(GIC_SPI_START + 145)
+#define INT_UART1DM_IRQ				(GIC_SPI_START + 146)
+#define GSBI1_QUP_IRQ				(GIC_SPI_START + 147)
+#define INT_UART2DM_IRQ				(GIC_SPI_START + 148)
+#define GSBI2_QUP_IRQ				(GIC_SPI_START + 149)
+#define INT_UART3DM_IRQ				(GIC_SPI_START + 150)
+#define GSBI3_QUP_IRQ				(GIC_SPI_START + 151)
+#define INT_UART4DM_IRQ				(GIC_SPI_START + 152)
+#define GSBI4_QUP_IRQ				(GIC_SPI_START + 153)
+#define INT_UART5DM_IRQ				(GIC_SPI_START + 154)
+#define GSBI5_QUP_IRQ				(GIC_SPI_START + 155)
+#define INT_UART6DM_IRQ				(GIC_SPI_START + 156)
+#define GSBI6_QUP_IRQ				(GIC_SPI_START + 157)
+#define INT_UART7DM_IRQ				(GIC_SPI_START + 158)
+#define GSBI7_QUP_IRQ				(GIC_SPI_START + 159)
+#define INT_UART8DM_IRQ				(GIC_SPI_START + 160)
+#define GSBI8_QUP_IRQ				(GIC_SPI_START + 161)
+#define TSIF_TSPP_IRQ				(GIC_SPI_START + 162)
+#define TSIF_BAM_IRQ				(GIC_SPI_START + 163)
+#define TSIF2_IRQ				(GIC_SPI_START + 164)
+#define TSIF1_IRQ				(GIC_SPI_START + 165)
+#define INT_ADM1_MASTER				(GIC_SPI_START + 166)
+#define INT_ADM1_AARM				(GIC_SPI_START + 167)
+#define INT_ADM1_SD2				(GIC_SPI_START + 168)
+#define INT_ADM1_SD3				(GIC_SPI_START + 169)
+#define INT_ADM0_MASTER				(GIC_SPI_START + 170)
+#define INT_ADM0_AARM				(GIC_SPI_START + 171)
+#define INT_ADM0_SD2				(GIC_SPI_START + 172)
+#define INT_ADM0_SD3				(GIC_SPI_START + 173)
+#define CC_SCSS_WDT1CPU1BITEEXPIRED		(GIC_SPI_START + 174)
+#define CC_SCSS_WDT1CPU0BITEEXPIRED		(GIC_SPI_START + 175)
+#define CC_SCSS_WDT0CPU1BITEEXPIRED		(GIC_SPI_START + 176)
+#define CC_SCSS_WDT0CPU0BITEEXPIRED		(GIC_SPI_START + 177)
+#define TSENS_UPPER_LOWER_INT			(GIC_SPI_START + 178)
+#define SSBI2_2_SC_CPU1_SECURE_INT		(GIC_SPI_START + 179)
+#define SSBI2_2_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 180)
+#define SSBI2_1_SC_CPU1_SECURE_INT		(GIC_SPI_START + 181)
+#define SSBI2_1_SC_CPU1_NON_SECURE_INT		(GIC_SPI_START + 182)
+#define XPU_SUMMARY_IRQ				(GIC_SPI_START + 183)
+#define BUS_EXCEPTION_SUMMARY_IRQ		(GIC_SPI_START + 184)
+#define HSDDRX_SMICH0_IRQ			(GIC_SPI_START + 185)
+#define HSDDRX_EBI1_IRQ				(GIC_SPI_START + 186)
+#define SDC5_BAM_IRQ				(GIC_SPI_START + 187)
+#define SDC5_IRQ_0				(GIC_SPI_START + 188)
+#define INT_UART9DM_IRQ				(GIC_SPI_START + 189)
+#define GSBI9_QUP_IRQ				(GIC_SPI_START + 190)
+#define INT_UART10DM_IRQ			(GIC_SPI_START + 191)
+#define GSBI10_QUP_IRQ				(GIC_SPI_START + 192)
+#define INT_UART11DM_IRQ			(GIC_SPI_START + 193)
+#define GSBI11_QUP_IRQ				(GIC_SPI_START + 194)
+#define INT_UART12DM_IRQ			(GIC_SPI_START + 195)
+#define GSBI12_QUP_IRQ				(GIC_SPI_START + 196)
+/*SPI 197 to 216 arent used in 8x60*/
+#define SMPSS_SPARE_1				(GIC_SPI_START + 217)
+#define SMPSS_SPARE_2				(GIC_SPI_START + 218)
+#define SMPSS_SPARE_3				(GIC_SPI_START + 219)
+#define SMPSS_SPARE_4				(GIC_SPI_START + 220)
+#define SMPSS_SPARE_5				(GIC_SPI_START + 221)
+#define SMPSS_SPARE_6				(GIC_SPI_START + 222)
+#define SMPSS_SPARE_7				(GIC_SPI_START + 223)
+
+#define NR_GPIO_IRQS 173
+#define NR_MSM_IRQS 256
+#define NR_BOARD_IRQS 0
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
index 164d355c96ea..8679a4564744 100644
--- a/arch/arm/mach-msm/include/mach/irqs.h
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -24,6 +24,8 @@
 #elif defined(CONFIG_ARCH_QSD8X50)
 #include "irqs-8x50.h"
 #include "sirc.h"
+#elif defined(CONFIG_ARCH_MSM8X60)
+#include "irqs-8x60.h"
 #elif defined(CONFIG_ARCH_MSM_ARM11)
 #include "irqs-7x00.h"
 #else
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
index 50c7847e6002..070e17d237f1 100644
--- a/arch/arm/mach-msm/include/mach/memory.h
+++ b/arch/arm/mach-msm/include/mach/memory.h
@@ -23,6 +23,8 @@
 #define PHYS_OFFSET		UL(0x20000000)
 #elif defined(CONFIG_ARCH_MSM7X30)
 #define PHYS_OFFSET		UL(0x00200000)
+#elif defined(CONFIG_ARCH_MSM8X60)
+#define PHYS_OFFSET		UL(0x40200000)
 #else
 #define PHYS_OFFSET		UL(0x10000000)
 #endif
diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h
index 0ecf25426284..d54b6b086cff 100644
--- a/arch/arm/mach-msm/include/mach/mmc.h
+++ b/arch/arm/mach-msm/include/mach/mmc.h
@@ -15,7 +15,7 @@ struct embedded_sdio_data {
 	int num_funcs;
 };
 
-struct mmc_platform_data {
+struct msm_mmc_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
 	u32 (*translate_vdd)(struct device *, unsigned int);
 	unsigned int (*status)(struct device *);
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
new file mode 100644
index 000000000000..45bab50e3ee6
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough.  Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_8X60_H
+#define __ASM_ARCH_MSM_IOMAP_8X60_H
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_QGIC_DIST_BASE	IOMEM(0xF0000000)
+#define MSM_QGIC_DIST_PHYS	0x02080000
+#define MSM_QGIC_DIST_SIZE	SZ_4K
+
+#define MSM_QGIC_CPU_BASE	IOMEM(0xF0001000)
+#define MSM_QGIC_CPU_PHYS	0x02081000
+#define MSM_QGIC_CPU_SIZE	SZ_4K
+
+#define MSM_ACC_BASE		IOMEM(0xF0002000)
+#define MSM_ACC_PHYS		0x02001000
+#define MSM_ACC_SIZE		SZ_4K
+
+#define MSM_GCC_BASE		IOMEM(0xF0003000)
+#define MSM_GCC_PHYS		0x02082000
+#define MSM_GCC_SIZE		SZ_4K
+
+#define MSM_TLMM_BASE		IOMEM(0xF0004000)
+#define MSM_TLMM_PHYS		0x00800000
+#define MSM_TLMM_SIZE		SZ_16K
+
+#define MSM_SHARED_RAM_BASE	IOMEM(0xF0100000)
+#define MSM_SHARED_RAM_SIZE	SZ_1M
+
+#define MSM_TMR_BASE		IOMEM(0xF0200000)
+#define MSM_TMR_PHYS		0x02000000
+#define MSM_TMR_SIZE		(SZ_1M)
+
+#define MSM_GPT_BASE		(MSM_TMR_BASE + 0x4)
+#define MSM_DGT_BASE		(MSM_TMR_BASE + 0x24)
+
+#define MSM_IOMMU_JPEGD_PHYS	0x07300000
+#define MSM_IOMMU_JPEGD_SIZE	SZ_1M
+
+#define MSM_IOMMU_VPE_PHYS	0x07400000
+#define MSM_IOMMU_VPE_SIZE	SZ_1M
+
+#define MSM_IOMMU_MDP0_PHYS	0x07500000
+#define MSM_IOMMU_MDP0_SIZE	SZ_1M
+
+#define MSM_IOMMU_MDP1_PHYS	0x07600000
+#define MSM_IOMMU_MDP1_SIZE	SZ_1M
+
+#define MSM_IOMMU_ROT_PHYS	0x07700000
+#define MSM_IOMMU_ROT_SIZE	SZ_1M
+
+#define MSM_IOMMU_IJPEG_PHYS	0x07800000
+#define MSM_IOMMU_IJPEG_SIZE	SZ_1M
+
+#define MSM_IOMMU_VFE_PHYS	0x07900000
+#define MSM_IOMMU_VFE_SIZE	SZ_1M
+
+#define MSM_IOMMU_VCODEC_A_PHYS	0x07A00000
+#define MSM_IOMMU_VCODEC_A_SIZE	SZ_1M
+
+#define MSM_IOMMU_VCODEC_B_PHYS	0x07B00000
+#define MSM_IOMMU_VCODEC_B_SIZE	SZ_1M
+
+#define MSM_IOMMU_GFX3D_PHYS	0x07C00000
+#define MSM_IOMMU_GFX3D_SIZE	SZ_1M
+
+#define MSM_IOMMU_GFX2D0_PHYS	0x07D00000
+#define MSM_IOMMU_GFX2D0_SIZE	SZ_1M
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index e6b1821cc4ea..8e24dd812139 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -47,8 +47,12 @@
 #include "msm_iomap-7x30.h"
 #elif defined(CONFIG_ARCH_QSD8X50)
 #include "msm_iomap-8x50.h"
+#elif defined(CONFIG_ARCH_MSM8X60)
+#include "msm_iomap-8x60.h"
 #else
 #include "msm_iomap-7x00.h"
 #endif
 
+
+
 #endif
diff --git a/arch/arm/mach-msm/include/mach/smp.h b/arch/arm/mach-msm/include/mach/smp.h
new file mode 100644
index 000000000000..3ff7bf5e679e
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/smp.h
@@ -0,0 +1,39 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Code Aurora nor
+ *       the names of its contributors may be used to endorse or promote
+ *       products derived from this software without specific prior written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_SMP_H
+#define __ASM_ARCH_MSM_SMP_H
+
+#include <asm/hardware/gic.h>
+
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
index 05f81fd8623c..31a32ad062dc 100644
--- a/arch/arm/mach-msm/include/mach/vmalloc.h
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_ARCH_MSM_VMALLOC_H
 #define __ASM_ARCH_MSM_VMALLOC_H
 
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END	  0xd0000000
 
 #endif
 
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 1c05060b5f3b..d36b61074146 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -100,6 +100,21 @@ void __init msm_map_qsd8x50_io(void)
 }
 #endif /* CONFIG_ARCH_QSD8X50 */
 
+#ifdef CONFIG_ARCH_MSM8X60
+static struct map_desc msm8x60_io_desc[] __initdata = {
+	MSM_DEVICE(QGIC_DIST),
+	MSM_DEVICE(QGIC_CPU),
+	MSM_DEVICE(TMR),
+	MSM_DEVICE(ACC),
+	MSM_DEVICE(GCC),
+};
+
+void __init msm_map_msm8x60_io(void)
+{
+	iotable_init(msm8x60_io_desc, ARRAY_SIZE(msm8x60_io_desc));
+}
+#endif /* CONFIG_ARCH_MSM8X60 */
+
 #ifdef CONFIG_ARCH_MSM7X30
 static struct map_desc msm7x30_io_desc[] __initdata = {
 	MSM_DEVICE(VIC),
diff --git a/arch/arm/mach-msm/iommu.c b/arch/arm/mach-msm/iommu.c
new file mode 100644
index 000000000000..f71747db3bee
--- /dev/null
+++ b/arch/arm/mach-msm/iommu.c
@@ -0,0 +1,597 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/iommu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/sizes.h>
+
+#include <mach/iommu_hw-8xxx.h>
+#include <mach/iommu.h>
+
+DEFINE_SPINLOCK(msm_iommu_lock);
+
+struct msm_priv {
+	unsigned long *pgtable;
+	struct list_head list_attached;
+};
+
+static void __flush_iotlb(struct iommu_domain *domain)
+{
+	struct msm_priv *priv = domain->priv;
+	struct msm_iommu_drvdata *iommu_drvdata;
+	struct msm_iommu_ctx_drvdata *ctx_drvdata;
+
+#ifndef CONFIG_IOMMU_PGTABLES_L2
+	unsigned long *fl_table = priv->pgtable;
+	int i;
+
+	dmac_flush_range(fl_table, fl_table + SZ_16K);
+
+	for (i = 0; i < NUM_FL_PTE; i++)
+		if ((fl_table[i] & 0x03) == FL_TYPE_TABLE) {
+			void *sl_table = __va(fl_table[i] & FL_BASE_MASK);
+			dmac_flush_range(sl_table, sl_table + SZ_4K);
+		}
+#endif
+
+	list_for_each_entry(ctx_drvdata, &priv->list_attached, attached_elm) {
+		if (!ctx_drvdata->pdev || !ctx_drvdata->pdev->dev.parent)
+			BUG();
+
+		iommu_drvdata = dev_get_drvdata(ctx_drvdata->pdev->dev.parent);
+		SET_CTX_TLBIALL(iommu_drvdata->base, ctx_drvdata->num, 0);
+	}
+}
+
+static void __reset_context(void __iomem *base, int ctx)
+{
+	SET_BPRCOSH(base, ctx, 0);
+	SET_BPRCISH(base, ctx, 0);
+	SET_BPRCNSH(base, ctx, 0);
+	SET_BPSHCFG(base, ctx, 0);
+	SET_BPMTCFG(base, ctx, 0);
+	SET_ACTLR(base, ctx, 0);
+	SET_SCTLR(base, ctx, 0);
+	SET_FSRRESTORE(base, ctx, 0);
+	SET_TTBR0(base, ctx, 0);
+	SET_TTBR1(base, ctx, 0);
+	SET_TTBCR(base, ctx, 0);
+	SET_BFBCR(base, ctx, 0);
+	SET_PAR(base, ctx, 0);
+	SET_FAR(base, ctx, 0);
+	SET_CTX_TLBIALL(base, ctx, 0);
+	SET_TLBFLPTER(base, ctx, 0);
+	SET_TLBSLPTER(base, ctx, 0);
+	SET_TLBLKCR(base, ctx, 0);
+	SET_PRRR(base, ctx, 0);
+	SET_NMRR(base, ctx, 0);
+	SET_CONTEXTIDR(base, ctx, 0);
+}
+
+static void __program_context(void __iomem *base, int ctx, phys_addr_t pgtable)
+{
+	__reset_context(base, ctx);
+
+	/* Set up HTW mode */
+	/* TLB miss configuration: perform HTW on miss */
+	SET_TLBMCFG(base, ctx, 0x3);
+
+	/* V2P configuration: HTW for access */
+	SET_V2PCFG(base, ctx, 0x3);
+
+	SET_TTBCR(base, ctx, 0);
+	SET_TTBR0_PA(base, ctx, (pgtable >> 14));
+
+	/* Invalidate the TLB for this context */
+	SET_CTX_TLBIALL(base, ctx, 0);
+
+	/* Set interrupt number to "secure" interrupt */
+	SET_IRPTNDX(base, ctx, 0);
+
+	/* Enable context fault interrupt */
+	SET_CFEIE(base, ctx, 1);
+
+	/* Stall access on a context fault and let the handler deal with it */
+	SET_CFCFG(base, ctx, 1);
+
+	/* Redirect all cacheable requests to L2 slave port. */
+	SET_RCISH(base, ctx, 1);
+	SET_RCOSH(base, ctx, 1);
+	SET_RCNSH(base, ctx, 1);
+
+	/* Turn on TEX Remap */
+	SET_TRE(base, ctx, 1);
+
+	/* Do not configure PRRR / NMRR on the IOMMU for now. We will assume
+	 * TEX class 0 for everything until attributes are properly worked out
+	 */
+	SET_PRRR(base, ctx, 0);
+	SET_NMRR(base, ctx, 0);
+
+	/* Turn on BFB prefetch */
+	SET_BFBDFE(base, ctx, 1);
+
+#ifdef CONFIG_IOMMU_PGTABLES_L2
+	/* Configure page tables as inner-cacheable and shareable to reduce
+	 * the TLB miss penalty.
+	 */
+	SET_TTBR0_SH(base, ctx, 1);
+	SET_TTBR1_SH(base, ctx, 1);
+
+	SET_TTBR0_NOS(base, ctx, 1);
+	SET_TTBR1_NOS(base, ctx, 1);
+
+	SET_TTBR0_IRGNH(base, ctx, 0); /* WB, WA */
+	SET_TTBR0_IRGNL(base, ctx, 1);
+
+	SET_TTBR1_IRGNH(base, ctx, 0); /* WB, WA */
+	SET_TTBR1_IRGNL(base, ctx, 1);
+
+	SET_TTBR0_ORGN(base, ctx, 1); /* WB, WA */
+	SET_TTBR1_ORGN(base, ctx, 1); /* WB, WA */
+#endif
+
+	/* Enable the MMU */
+	SET_M(base, ctx, 1);
+}
+
+static int msm_iommu_domain_init(struct iommu_domain *domain)
+{
+	struct msm_priv *priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+
+	if (!priv)
+		goto fail_nomem;
+
+	INIT_LIST_HEAD(&priv->list_attached);
+	priv->pgtable = (unsigned long *)__get_free_pages(GFP_KERNEL,
+							  get_order(SZ_16K));
+
+	if (!priv->pgtable)
+		goto fail_nomem;
+
+	memset(priv->pgtable, 0, SZ_16K);
+	domain->priv = priv;
+	return 0;
+
+fail_nomem:
+	kfree(priv);
+	return -ENOMEM;
+}
+
+static void msm_iommu_domain_destroy(struct iommu_domain *domain)
+{
+	struct msm_priv *priv;
+	unsigned long flags;
+	unsigned long *fl_table;
+	int i;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+	priv = domain->priv;
+	domain->priv = NULL;
+
+	if (priv) {
+		fl_table = priv->pgtable;
+
+		for (i = 0; i < NUM_FL_PTE; i++)
+			if ((fl_table[i] & 0x03) == FL_TYPE_TABLE)
+				free_page((unsigned long) __va(((fl_table[i]) &
+								FL_BASE_MASK)));
+
+		free_pages((unsigned long)priv->pgtable, get_order(SZ_16K));
+		priv->pgtable = NULL;
+	}
+
+	kfree(priv);
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+}
+
+static int msm_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
+{
+	struct msm_priv *priv;
+	struct msm_iommu_ctx_dev *ctx_dev;
+	struct msm_iommu_drvdata *iommu_drvdata;
+	struct msm_iommu_ctx_drvdata *ctx_drvdata;
+	struct msm_iommu_ctx_drvdata *tmp_drvdata;
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+
+	priv = domain->priv;
+
+	if (!priv || !dev) {
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	iommu_drvdata = dev_get_drvdata(dev->parent);
+	ctx_drvdata = dev_get_drvdata(dev);
+	ctx_dev = dev->platform_data;
+
+	if (!iommu_drvdata || !ctx_drvdata || !ctx_dev) {
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	list_for_each_entry(tmp_drvdata, &priv->list_attached, attached_elm)
+		if (tmp_drvdata == ctx_drvdata) {
+			ret = -EBUSY;
+			goto fail;
+		}
+
+	__program_context(iommu_drvdata->base, ctx_dev->num,
+			  __pa(priv->pgtable));
+
+	list_add(&(ctx_drvdata->attached_elm), &priv->list_attached);
+	__flush_iotlb(domain);
+
+fail:
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+	return ret;
+}
+
+static void msm_iommu_detach_dev(struct iommu_domain *domain,
+				 struct device *dev)
+{
+	struct msm_priv *priv;
+	struct msm_iommu_ctx_dev *ctx_dev;
+	struct msm_iommu_drvdata *iommu_drvdata;
+	struct msm_iommu_ctx_drvdata *ctx_drvdata;
+	unsigned long flags;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+	priv = domain->priv;
+
+	if (!priv || !dev)
+		goto fail;
+
+	iommu_drvdata = dev_get_drvdata(dev->parent);
+	ctx_drvdata = dev_get_drvdata(dev);
+	ctx_dev = dev->platform_data;
+
+	if (!iommu_drvdata || !ctx_drvdata || !ctx_dev)
+		goto fail;
+
+	__flush_iotlb(domain);
+	__reset_context(iommu_drvdata->base, ctx_dev->num);
+	list_del_init(&ctx_drvdata->attached_elm);
+
+fail:
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+}
+
+static int msm_iommu_map(struct iommu_domain *domain, unsigned long va,
+			 phys_addr_t pa, int order, int prot)
+{
+	struct msm_priv *priv;
+	unsigned long flags;
+	unsigned long *fl_table;
+	unsigned long *fl_pte;
+	unsigned long fl_offset;
+	unsigned long *sl_table;
+	unsigned long *sl_pte;
+	unsigned long sl_offset;
+	size_t len = 0x1000UL << order;
+	int ret = 0;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+	priv = domain->priv;
+
+	if (!priv) {
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	fl_table = priv->pgtable;
+
+	if (len != SZ_16M && len != SZ_1M &&
+	    len != SZ_64K && len != SZ_4K) {
+		pr_debug("Bad size: %d\n", len);
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	if (!fl_table) {
+		pr_debug("Null page table\n");
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	fl_offset = FL_OFFSET(va);	/* Upper 12 bits */
+	fl_pte = fl_table + fl_offset;	/* int pointers, 4 bytes */
+
+	if (len == SZ_16M) {
+		int i = 0;
+		for (i = 0; i < 16; i++)
+			*(fl_pte+i) = (pa & 0xFF000000) | FL_SUPERSECTION |
+				  FL_AP_READ | FL_AP_WRITE | FL_TYPE_SECT |
+				  FL_SHARED;
+	}
+
+	if (len == SZ_1M)
+		*fl_pte = (pa & 0xFFF00000) | FL_AP_READ | FL_AP_WRITE |
+						FL_TYPE_SECT | FL_SHARED;
+
+	/* Need a 2nd level table */
+	if ((len == SZ_4K || len == SZ_64K) && (*fl_pte) == 0) {
+		unsigned long *sl;
+		sl = (unsigned long *) __get_free_pages(GFP_KERNEL,
+							get_order(SZ_4K));
+
+		if (!sl) {
+			pr_debug("Could not allocate second level table\n");
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		memset(sl, 0, SZ_4K);
+		*fl_pte = ((((int)__pa(sl)) & FL_BASE_MASK) | FL_TYPE_TABLE);
+	}
+
+	sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK));
+	sl_offset = SL_OFFSET(va);
+	sl_pte = sl_table + sl_offset;
+
+
+	if (len == SZ_4K)
+		*sl_pte = (pa & SL_BASE_MASK_SMALL) | SL_AP0 | SL_AP1 |
+					  SL_SHARED | SL_TYPE_SMALL;
+
+	if (len == SZ_64K) {
+		int i;
+
+		for (i = 0; i < 16; i++)
+			*(sl_pte+i) = (pa & SL_BASE_MASK_LARGE) | SL_AP0 |
+					    SL_AP1 | SL_SHARED | SL_TYPE_LARGE;
+	}
+
+	__flush_iotlb(domain);
+fail:
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+	return ret;
+}
+
+static int msm_iommu_unmap(struct iommu_domain *domain, unsigned long va,
+			    int order)
+{
+	struct msm_priv *priv;
+	unsigned long flags;
+	unsigned long *fl_table;
+	unsigned long *fl_pte;
+	unsigned long fl_offset;
+	unsigned long *sl_table;
+	unsigned long *sl_pte;
+	unsigned long sl_offset;
+	size_t len = 0x1000UL << order;
+	int i, ret = 0;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+
+	priv = domain->priv;
+
+	if (!priv) {
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	fl_table = priv->pgtable;
+
+	if (len != SZ_16M && len != SZ_1M &&
+	    len != SZ_64K && len != SZ_4K) {
+		pr_debug("Bad length: %d\n", len);
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	if (!fl_table) {
+		pr_debug("Null page table\n");
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	fl_offset = FL_OFFSET(va);	/* Upper 12 bits */
+	fl_pte = fl_table + fl_offset;	/* int pointers, 4 bytes */
+
+	if (*fl_pte == 0) {
+		pr_debug("First level PTE is 0\n");
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	/* Unmap supersection */
+	if (len == SZ_16M)
+		for (i = 0; i < 16; i++)
+			*(fl_pte+i) = 0;
+
+	if (len == SZ_1M)
+		*fl_pte = 0;
+
+	sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK));
+	sl_offset = SL_OFFSET(va);
+	sl_pte = sl_table + sl_offset;
+
+	if (len == SZ_64K) {
+		for (i = 0; i < 16; i++)
+			*(sl_pte+i) = 0;
+	}
+
+	if (len == SZ_4K)
+		*sl_pte = 0;
+
+	if (len == SZ_4K || len == SZ_64K) {
+		int used = 0;
+
+		for (i = 0; i < NUM_SL_PTE; i++)
+			if (sl_table[i])
+				used = 1;
+		if (!used) {
+			free_page((unsigned long)sl_table);
+			*fl_pte = 0;
+		}
+	}
+
+	__flush_iotlb(domain);
+fail:
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+	return ret;
+}
+
+static phys_addr_t msm_iommu_iova_to_phys(struct iommu_domain *domain,
+					  unsigned long va)
+{
+	struct msm_priv *priv;
+	struct msm_iommu_drvdata *iommu_drvdata;
+	struct msm_iommu_ctx_drvdata *ctx_drvdata;
+	unsigned int par;
+	unsigned long flags;
+	void __iomem *base;
+	phys_addr_t ret = 0;
+	int ctx;
+
+	spin_lock_irqsave(&msm_iommu_lock, flags);
+
+	priv = domain->priv;
+	if (list_empty(&priv->list_attached))
+		goto fail;
+
+	ctx_drvdata = list_entry(priv->list_attached.next,
+				 struct msm_iommu_ctx_drvdata, attached_elm);
+	iommu_drvdata = dev_get_drvdata(ctx_drvdata->pdev->dev.parent);
+
+	base = iommu_drvdata->base;
+	ctx = ctx_drvdata->num;
+
+	/* Invalidate context TLB */
+	SET_CTX_TLBIALL(base, ctx, 0);
+	SET_V2PPR_VA(base, ctx, va >> V2Pxx_VA_SHIFT);
+
+	if (GET_FAULT(base, ctx))
+		goto fail;
+
+	par = GET_PAR(base, ctx);
+
+	/* We are dealing with a supersection */
+	if (GET_NOFAULT_SS(base, ctx))
+		ret = (par & 0xFF000000) | (va & 0x00FFFFFF);
+	else	/* Upper 20 bits from PAR, lower 12 from VA */
+		ret = (par & 0xFFFFF000) | (va & 0x00000FFF);
+
+fail:
+	spin_unlock_irqrestore(&msm_iommu_lock, flags);
+	return ret;
+}
+
+static int msm_iommu_domain_has_cap(struct iommu_domain *domain,
+				    unsigned long cap)
+{
+	return 0;
+}
+
+static void print_ctx_regs(void __iomem *base, int ctx)
+{
+	unsigned int fsr = GET_FSR(base, ctx);
+	pr_err("FAR    = %08x    PAR    = %08x\n",
+	       GET_FAR(base, ctx), GET_PAR(base, ctx));
+	pr_err("FSR    = %08x [%s%s%s%s%s%s%s%s%s%s]\n", fsr,
+			(fsr & 0x02) ? "TF " : "",
+			(fsr & 0x04) ? "AFF " : "",
+			(fsr & 0x08) ? "APF " : "",
+			(fsr & 0x10) ? "TLBMF " : "",
+			(fsr & 0x20) ? "HTWDEEF " : "",
+			(fsr & 0x40) ? "HTWSEEF " : "",
+			(fsr & 0x80) ? "MHF " : "",
+			(fsr & 0x10000) ? "SL " : "",
+			(fsr & 0x40000000) ? "SS " : "",
+			(fsr & 0x80000000) ? "MULTI " : "");
+
+	pr_err("FSYNR0 = %08x    FSYNR1 = %08x\n",
+	       GET_FSYNR0(base, ctx), GET_FSYNR1(base, ctx));
+	pr_err("TTBR0  = %08x    TTBR1  = %08x\n",
+	       GET_TTBR0(base, ctx), GET_TTBR1(base, ctx));
+	pr_err("SCTLR  = %08x    ACTLR  = %08x\n",
+	       GET_SCTLR(base, ctx), GET_ACTLR(base, ctx));
+	pr_err("PRRR   = %08x    NMRR   = %08x\n",
+	       GET_PRRR(base, ctx), GET_NMRR(base, ctx));
+}
+
+irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id)
+{
+	struct msm_iommu_drvdata *drvdata = dev_id;
+	void __iomem *base;
+	unsigned int fsr = 0;
+	int ncb = 0, i = 0;
+
+	spin_lock(&msm_iommu_lock);
+
+	if (!drvdata) {
+		pr_err("Invalid device ID in context interrupt handler\n");
+		goto fail;
+	}
+
+	base = drvdata->base;
+
+	pr_err("===== WOAH! =====\n");
+	pr_err("Unexpected IOMMU page fault!\n");
+	pr_err("base = %08x\n", (unsigned int) base);
+
+	ncb = GET_NCB(base)+1;
+	for (i = 0; i < ncb; i++) {
+		fsr = GET_FSR(base, i);
+		if (fsr) {
+			pr_err("Fault occurred in context %d.\n", i);
+			pr_err("Interesting registers:\n");
+			print_ctx_regs(base, i);
+			SET_FSR(base, i, 0x4000000F);
+		}
+	}
+fail:
+	spin_unlock(&msm_iommu_lock);
+	return 0;
+}
+
+static struct iommu_ops msm_iommu_ops = {
+	.domain_init = msm_iommu_domain_init,
+	.domain_destroy = msm_iommu_domain_destroy,
+	.attach_dev = msm_iommu_attach_dev,
+	.detach_dev = msm_iommu_detach_dev,
+	.map = msm_iommu_map,
+	.unmap = msm_iommu_unmap,
+	.iova_to_phys = msm_iommu_iova_to_phys,
+	.domain_has_cap = msm_iommu_domain_has_cap
+};
+
+static int msm_iommu_init(void)
+{
+	register_iommu(&msm_iommu_ops);
+	return 0;
+}
+
+subsys_initcall(msm_iommu_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/arch/arm/mach-msm/iommu_dev.c b/arch/arm/mach-msm/iommu_dev.c
new file mode 100644
index 000000000000..9019cee2907b
--- /dev/null
+++ b/arch/arm/mach-msm/iommu_dev.c
@@ -0,0 +1,378 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/iommu.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <mach/iommu_hw-8xxx.h>
+#include <mach/iommu.h>
+
+struct iommu_ctx_iter_data {
+	/* input */
+	const char *name;
+
+	/* output */
+	struct device *dev;
+};
+
+static struct platform_device *msm_iommu_root_dev;
+
+static int each_iommu_ctx(struct device *dev, void *data)
+{
+	struct iommu_ctx_iter_data *res = data;
+	struct msm_iommu_ctx_dev *c = dev->platform_data;
+
+	if (!res || !c || !c->name || !res->name)
+		return -EINVAL;
+
+	if (!strcmp(res->name, c->name)) {
+		res->dev = dev;
+		return 1;
+	}
+	return 0;
+}
+
+static int each_iommu(struct device *dev, void *data)
+{
+	return device_for_each_child(dev, data, each_iommu_ctx);
+}
+
+struct device *msm_iommu_get_ctx(const char *ctx_name)
+{
+	struct iommu_ctx_iter_data r;
+	int found;
+
+	if (!msm_iommu_root_dev) {
+		pr_err("No root IOMMU device.\n");
+		goto fail;
+	}
+
+	r.name = ctx_name;
+	found = device_for_each_child(&msm_iommu_root_dev->dev, &r, each_iommu);
+
+	if (!found) {
+		pr_err("Could not find context <%s>\n", ctx_name);
+		goto fail;
+	}
+
+	return r.dev;
+fail:
+	return NULL;
+}
+EXPORT_SYMBOL(msm_iommu_get_ctx);
+
+static void msm_iommu_reset(void __iomem *base)
+{
+	int ctx, ncb;
+
+	SET_RPUE(base, 0);
+	SET_RPUEIE(base, 0);
+	SET_ESRRESTORE(base, 0);
+	SET_TBE(base, 0);
+	SET_CR(base, 0);
+	SET_SPDMBE(base, 0);
+	SET_TESTBUSCR(base, 0);
+	SET_TLBRSW(base, 0);
+	SET_GLOBAL_TLBIALL(base, 0);
+	SET_RPU_ACR(base, 0);
+	SET_TLBLKCRWE(base, 1);
+	ncb = GET_NCB(base)+1;
+
+	for (ctx = 0; ctx < ncb; ctx++) {
+		SET_BPRCOSH(base, ctx, 0);
+		SET_BPRCISH(base, ctx, 0);
+		SET_BPRCNSH(base, ctx, 0);
+		SET_BPSHCFG(base, ctx, 0);
+		SET_BPMTCFG(base, ctx, 0);
+		SET_ACTLR(base, ctx, 0);
+		SET_SCTLR(base, ctx, 0);
+		SET_FSRRESTORE(base, ctx, 0);
+		SET_TTBR0(base, ctx, 0);
+		SET_TTBR1(base, ctx, 0);
+		SET_TTBCR(base, ctx, 0);
+		SET_BFBCR(base, ctx, 0);
+		SET_PAR(base, ctx, 0);
+		SET_FAR(base, ctx, 0);
+		SET_CTX_TLBIALL(base, ctx, 0);
+		SET_TLBFLPTER(base, ctx, 0);
+		SET_TLBSLPTER(base, ctx, 0);
+		SET_TLBLKCR(base, ctx, 0);
+		SET_PRRR(base, ctx, 0);
+		SET_NMRR(base, ctx, 0);
+		SET_CONTEXTIDR(base, ctx, 0);
+	}
+}
+
+static int msm_iommu_probe(struct platform_device *pdev)
+{
+	struct resource *r, *r2;
+	struct clk *iommu_clk;
+	struct msm_iommu_drvdata *drvdata;
+	struct msm_iommu_dev *iommu_dev = pdev->dev.platform_data;
+	void __iomem *regs_base;
+	resource_size_t	len;
+	int ret = 0, ncb, nm2v, irq;
+
+	if (pdev->id != -1) {
+		drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
+
+		if (!drvdata) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		if (!iommu_dev) {
+			ret = -ENODEV;
+			goto fail;
+		}
+
+		if (iommu_dev->clk_rate != 0) {
+			iommu_clk = clk_get(&pdev->dev, "iommu_clk");
+
+			if (IS_ERR(iommu_clk)) {
+				ret = -ENODEV;
+				goto fail;
+			}
+
+			if (iommu_dev->clk_rate > 0) {
+				ret = clk_set_rate(iommu_clk,
+							iommu_dev->clk_rate);
+				if (ret) {
+					clk_put(iommu_clk);
+					goto fail;
+				}
+			}
+
+			ret = clk_enable(iommu_clk);
+			if (ret) {
+				clk_put(iommu_clk);
+				goto fail;
+			}
+			clk_put(iommu_clk);
+		}
+
+		r = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						 "physbase");
+		if (!r) {
+			ret = -ENODEV;
+			goto fail;
+		}
+
+		len = r->end - r->start + 1;
+
+		r2 = request_mem_region(r->start, len, r->name);
+		if (!r2) {
+			pr_err("Could not request memory region: "
+			"start=%p, len=%d\n", (void *) r->start, len);
+			ret = -EBUSY;
+			goto fail;
+		}
+
+		regs_base = ioremap(r2->start, len);
+
+		if (!regs_base) {
+			pr_err("Could not ioremap: start=%p, len=%d\n",
+				 (void *) r2->start, len);
+			ret = -EBUSY;
+			goto fail_mem;
+		}
+
+		irq = platform_get_irq_byname(pdev, "secure_irq");
+		if (irq < 0) {
+			ret = -ENODEV;
+			goto fail_io;
+		}
+
+		mb();
+
+		if (GET_IDR(regs_base) == 0) {
+			pr_err("Invalid IDR value detected\n");
+			ret = -ENODEV;
+			goto fail_io;
+		}
+
+		ret = request_irq(irq, msm_iommu_fault_handler, 0,
+				"msm_iommu_secure_irpt_handler", drvdata);
+		if (ret) {
+			pr_err("Request IRQ %d failed with ret=%d\n", irq, ret);
+			goto fail_io;
+		}
+
+		msm_iommu_reset(regs_base);
+		drvdata->base = regs_base;
+		drvdata->irq = irq;
+
+		nm2v = GET_NM2VCBMT((unsigned long) regs_base);
+		ncb = GET_NCB((unsigned long) regs_base);
+
+		pr_info("device %s mapped at %p, irq %d with %d ctx banks\n",
+			iommu_dev->name, regs_base, irq, ncb+1);
+
+		platform_set_drvdata(pdev, drvdata);
+	} else
+		msm_iommu_root_dev = pdev;
+
+	return 0;
+
+fail_io:
+	iounmap(regs_base);
+fail_mem:
+	release_mem_region(r->start, len);
+fail:
+	kfree(drvdata);
+	return ret;
+}
+
+static int msm_iommu_remove(struct platform_device *pdev)
+{
+	struct msm_iommu_drvdata *drv = NULL;
+
+	drv = platform_get_drvdata(pdev);
+	if (drv) {
+		memset(drv, 0, sizeof(struct msm_iommu_drvdata));
+		kfree(drv);
+		platform_set_drvdata(pdev, NULL);
+	}
+	return 0;
+}
+
+static int msm_iommu_ctx_probe(struct platform_device *pdev)
+{
+	struct msm_iommu_ctx_dev *c = pdev->dev.platform_data;
+	struct msm_iommu_drvdata *drvdata;
+	struct msm_iommu_ctx_drvdata *ctx_drvdata = NULL;
+	int i, ret = 0;
+	if (!c || !pdev->dev.parent) {
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	drvdata = dev_get_drvdata(pdev->dev.parent);
+
+	if (!drvdata) {
+		ret = -ENODEV;
+		goto fail;
+	}
+
+	ctx_drvdata = kzalloc(sizeof(*ctx_drvdata), GFP_KERNEL);
+	if (!ctx_drvdata) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+	ctx_drvdata->num = c->num;
+	ctx_drvdata->pdev = pdev;
+
+	INIT_LIST_HEAD(&ctx_drvdata->attached_elm);
+	platform_set_drvdata(pdev, ctx_drvdata);
+
+	/* Program the M2V tables for this context */
+	for (i = 0; i < MAX_NUM_MIDS; i++) {
+		int mid = c->mids[i];
+		if (mid == -1)
+			break;
+
+		SET_M2VCBR_N(drvdata->base, mid, 0);
+		SET_CBACR_N(drvdata->base, c->num, 0);
+
+		/* Set VMID = MID */
+		SET_VMID(drvdata->base, mid, mid);
+
+		/* Set the context number for that MID to this context */
+		SET_CBNDX(drvdata->base, mid, c->num);
+
+		/* Set MID associated with this context bank */
+		SET_CBVMID(drvdata->base, c->num, mid);
+
+		/* Set security bit override to be Non-secure */
+		SET_NSCFG(drvdata->base, mid, 3);
+	}
+
+	pr_info("context device %s with bank index %d\n", c->name, c->num);
+
+	return 0;
+fail:
+	kfree(ctx_drvdata);
+	return ret;
+}
+
+static int msm_iommu_ctx_remove(struct platform_device *pdev)
+{
+	struct msm_iommu_ctx_drvdata *drv = NULL;
+	drv = platform_get_drvdata(pdev);
+	if (drv) {
+		memset(drv, 0, sizeof(struct msm_iommu_ctx_drvdata));
+		kfree(drv);
+		platform_set_drvdata(pdev, NULL);
+	}
+	return 0;
+}
+
+static struct platform_driver msm_iommu_driver = {
+	.driver = {
+		.name	= "msm_iommu",
+	},
+	.probe		= msm_iommu_probe,
+	.remove		= msm_iommu_remove,
+};
+
+static struct platform_driver msm_iommu_ctx_driver = {
+	.driver = {
+		.name	= "msm_iommu_ctx",
+	},
+	.probe		= msm_iommu_ctx_probe,
+	.remove		= msm_iommu_ctx_remove,
+};
+
+static int msm_iommu_driver_init(void)
+{
+	int ret;
+	ret = platform_driver_register(&msm_iommu_driver);
+	if (ret != 0) {
+		pr_err("Failed to register IOMMU driver\n");
+		goto error;
+	}
+
+	ret = platform_driver_register(&msm_iommu_ctx_driver);
+	if (ret != 0) {
+		pr_err("Failed to register IOMMU context driver\n");
+		goto error;
+	}
+
+error:
+	return ret;
+}
+
+static void msm_iommu_driver_exit(void)
+{
+	platform_driver_unregister(&msm_iommu_ctx_driver);
+	platform_driver_unregister(&msm_iommu_driver);
+}
+
+subsys_initcall(msm_iommu_driver_init);
+module_exit(msm_iommu_driver_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>");
diff --git a/arch/arm/mach-msm/last_radio_log.c b/arch/arm/mach-msm/last_radio_log.c
index b64ba5a98686..1e243f46a969 100644
--- a/arch/arm/mach-msm/last_radio_log.c
+++ b/arch/arm/mach-msm/last_radio_log.c
@@ -48,7 +48,8 @@ static ssize_t last_radio_log_read(struct file *file, char __user *buf,
 }
 
 static struct file_operations last_radio_log_fops = {
-	.read = last_radio_log_read
+	.read = last_radio_log_read,
+	.llseek = default_llseek,
 };
 
 void msm_init_last_radio_log(struct module *owner)
diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c
index cf11d414b425..f07dc7c738f0 100644
--- a/arch/arm/mach-msm/smd.c
+++ b/arch/arm/mach-msm/smd.c
@@ -997,7 +997,7 @@ int smd_core_init(void)
 	return 0;
 }
 
-static int __init msm_smd_probe(struct platform_device *pdev)
+static int __devinit msm_smd_probe(struct platform_device *pdev)
 {
 	pr_info("smd_init()\n");
 
diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c
index 3b2dd717b788..f91c3b7bc655 100644
--- a/arch/arm/mach-msm/smd_debug.c
+++ b/arch/arm/mach-msm/smd_debug.c
@@ -212,6 +212,7 @@ static int debug_open(struct inode *inode, struct file *file)
 static const struct file_operations debug_ops = {
 	.read = debug_read,
 	.open = debug_open,
+	.llseek = default_llseek,
 };
 
 static void debug_create(const char *name, mode_t mode,
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index dec5ca622d7d..950100f19d07 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -28,7 +28,6 @@
 #ifndef MSM_DGT_BASE
 #define MSM_DGT_BASE (MSM_GPT_BASE + 0x10)
 #endif
-#define MSM_DGT_SHIFT (5)
 
 #define TIMER_MATCH_VAL         0x0000
 #define TIMER_COUNT_VAL         0x0004
@@ -36,12 +35,28 @@
 #define TIMER_ENABLE_CLR_ON_MATCH_EN    2
 #define TIMER_ENABLE_EN                 1
 #define TIMER_CLEAR             0x000C
-
+#define DGT_CLK_CTL             0x0034
+enum {
+	DGT_CLK_CTL_DIV_1 = 0,
+	DGT_CLK_CTL_DIV_2 = 1,
+	DGT_CLK_CTL_DIV_3 = 2,
+	DGT_CLK_CTL_DIV_4 = 3,
+};
 #define CSR_PROTECTION          0x0020
 #define CSR_PROTECTION_EN               1
 
 #define GPT_HZ 32768
+
+#if defined(CONFIG_ARCH_QSD8X50)
+#define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */
+#define MSM_DGT_SHIFT (0)
+#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60)
+#define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */
+#define MSM_DGT_SHIFT (0)
+#else
 #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
+#define MSM_DGT_SHIFT (5)
+#endif
 
 struct msm_clock {
 	struct clock_event_device   clockevent;
@@ -122,7 +137,7 @@ static struct msm_clock msm_clocks[] = {
 			.rating         = 200,
 			.read           = msm_gpt_read,
 			.mask           = CLOCKSOURCE_MASK(32),
-			.shift          = 24,
+			.shift          = 17,
 			.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 		},
 		.irq = {
@@ -170,6 +185,10 @@ static void __init msm_timer_init(void)
 	int i;
 	int res;
 
+#ifdef CONFIG_ARCH_MSM8X60
+	writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
+#endif
+
 	for (i = 0; i < ARRAY_SIZE(msm_clocks); i++) {
 		struct msm_clock *clock = &msm_clocks[i];
 		struct clock_event_device *ce = &clock->clockevent;
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 61e5e583603b..29e390e89ff4 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -145,8 +145,6 @@ subsys_initcall(wxl_pci_init);
 
 MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
 	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
-	.phys_io	= MV78XX0_REGS_PHYS_BASE,
-	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= wxl_init,
 	.map_io		= mv78xx0_map_io,
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index efdabe04c69e..207c95e403b9 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -93,8 +93,6 @@ subsys_initcall(db78x00_pci_init);
 
 MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= MV78XX0_REGS_PHYS_BASE,
-	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= db78x00_init,
 	.map_io		= mv78xx0_map_io,
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index cd81689c4621..04891428e48b 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
 
 #include <mach/mv78xx0.h>
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
-	ldrne	\rx, =MV78XX0_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro	addruart, rp, rv
+	ldr	\rp, =MV78XX0_REGS_PHYS_BASE
+	ldr	\rv, =MV78XX0_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index e136b7a03355..3511ad4d973b 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -78,8 +78,6 @@ subsys_initcall(rd78x00_pci_init);
 
 MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= MV78XX0_REGS_PHYS_BASE,
-	.io_pg_offst	= ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd78x00_masa_init,
 	.map_io		= mv78xx0_map_io,
diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
deleted file mode 100644
index eb7660f5d4b7..000000000000
--- a/arch/arm/mach-mx1/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-if ARCH_MX1
-
-comment "MX1 platforms:"
-
-config MACH_MXLADS
-	bool
-
-config ARCH_MX1ADS
-	bool "MX1ADS platform"
-	select MACH_MXLADS
-	help
-	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
-
-config MACH_SCB9328
-	bool "Synertronixx scb9328"
-	help
-	  Say Y here if you are using a Synertronixx scb9328 board
-
-endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
deleted file mode 100644
index fc2ddf82441b..000000000000
--- a/arch/arm/mach-mx1/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
-obj-y			+= generic.o clock.o devices.o
-
-# Support for CMOS sensor interface
-obj-$(CONFIG_MX1_VIDEO)	+= ksym_mx1.o mx1_camera_fiq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
diff --git a/arch/arm/mach-mx1/Makefile.boot b/arch/arm/mach-mx1/Makefile.boot
deleted file mode 100644
index 8ed1492288a2..000000000000
--- a/arch/arm/mach-mx1/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	:= 0x08008000
-params_phys-y	:= 0x08000100
-initrd_phys-y	:= 0x08800000
-
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
deleted file mode 100644
index 6cf2d4a7511d..000000000000
--- a/arch/arm/mach-mx1/clock.c
+++ /dev/null
@@ -1,602 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include "crm_regs.h"
-
-static int _clk_enable(struct clk *clk)
-{
-	unsigned int reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
-	unsigned int reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_can_use_parent(const struct clk *clk_arr[], unsigned int size,
-			       struct clk *parent)
-{
-	int i;
-
-	for (i = 0; i < size; i++)
-		if (parent == clk_arr[i])
-			return i;
-
-	return -EINVAL;
-}
-
-static unsigned long
-_clk_simple_round_rate(struct clk *clk, unsigned long rate, unsigned int limit)
-{
-	int div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > limit)
-		div = limit;
-
-	return parent_rate / div;
-}
-
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->round_rate(clk->parent, rate);
-}
-
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->set_rate(clk->parent, rate);
-}
-
-static unsigned long clk16m_get_rate(struct clk *clk)
-{
-	return 16000000;
-}
-
-static struct clk clk16m = {
-	.get_rate = clk16m_get_rate,
-	.enable = _clk_enable,
-	.enable_reg = CCM_CSCR,
-	.enable_shift = CCM_CSCR_OSC_EN_SHIFT,
-	.disable = _clk_disable,
-};
-
-/* in Hz */
-static unsigned long clk32_rate;
-
-static unsigned long clk32_get_rate(struct clk *clk)
-{
-	return clk32_rate;
-}
-
-static struct clk clk32 = {
-	.get_rate = clk32_get_rate,
-};
-
-static unsigned long clk32_premult_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) * 512;
-}
-
-static struct clk clk32_premult = {
-	.parent = &clk32,
-	.get_rate = clk32_premult_get_rate,
-};
-
-static const struct clk *prem_clk_clocks[] = {
-	&clk32_premult,
-	&clk16m,
-};
-
-static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i;
-	unsigned int reg = __raw_readl(CCM_CSCR);
-
-	i = _clk_can_use_parent(prem_clk_clocks, ARRAY_SIZE(prem_clk_clocks),
-				parent);
-
-	switch (i) {
-	case 0:
-		reg &= ~CCM_CSCR_SYSTEM_SEL;
-		break;
-	case 1:
-		reg |= CCM_CSCR_SYSTEM_SEL;
-		break;
-	default:
-		return i;
-	}
-
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static struct clk prem_clk = {
-	.set_parent = prem_clk_set_parent,
-};
-
-static unsigned long system_clk_get_rate(struct clk *clk)
-{
-	return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
-			      clk_get_rate(clk->parent));
-}
-
-static struct clk system_clk = {
-	.parent = &prem_clk,
-	.get_rate = system_clk_get_rate,
-};
-
-static unsigned long mcu_clk_get_rate(struct clk *clk)
-{
-	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
-			      clk_get_rate(clk->parent));
-}
-
-static struct clk mcu_clk = {
-	.parent = &clk32_premult,
-	.get_rate = mcu_clk_get_rate,
-};
-
-static unsigned long fclk_get_rate(struct clk *clk)
-{
-	unsigned long fclk = clk_get_rate(clk->parent);
-
-	if (__raw_readl(CCM_CSCR) & CCM_CSCR_PRESC)
-		fclk /= 2;
-
-	return fclk;
-}
-
-static struct clk fclk = {
-	.parent = &mcu_clk,
-	.get_rate = fclk_get_rate,
-};
-
-/*
- *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long hclk_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
-			CCM_CSCR_BCLK_MASK) >> CCM_CSCR_BCLK_OFFSET) + 1);
-}
-
-static unsigned long hclk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int hclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_BCLK_MASK;
-	reg |= div << CCM_CSCR_BCLK_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static struct clk hclk = {
-	.parent = &system_clk,
-	.get_rate = hclk_get_rate,
-	.round_rate = hclk_round_rate,
-	.set_rate = hclk_set_rate,
-};
-
-static unsigned long clk48m_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
-			CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET) + 1);
-}
-
-static unsigned long clk48m_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 8);
-}
-
-static int clk48m_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_USB_MASK;
-	reg |= div << CCM_CSCR_USB_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static struct clk clk48m = {
-	.parent = &system_clk,
-	.get_rate = clk48m_get_rate,
-	.round_rate = clk48m_round_rate,
-	.set_rate = clk48m_set_rate,
-};
-
-/*
- *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long perclk1_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
-			CCM_PCDR_PCLK1_MASK) >> CCM_PCDR_PCLK1_OFFSET) + 1);
-}
-
-static unsigned long perclk1_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int perclk1_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_PCDR);
-	reg &= ~CCM_PCDR_PCLK1_MASK;
-	reg |= div << CCM_PCDR_PCLK1_OFFSET;
-	__raw_writel(reg, CCM_PCDR);
-
-	return 0;
-}
-
-/*
- *  get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long perclk2_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
-			CCM_PCDR_PCLK2_MASK) >> CCM_PCDR_PCLK2_OFFSET) + 1);
-}
-
-static unsigned long perclk2_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int perclk2_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 16 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_PCDR);
-	reg &= ~CCM_PCDR_PCLK2_MASK;
-	reg |= div << CCM_PCDR_PCLK2_OFFSET;
-	__raw_writel(reg, CCM_PCDR);
-
-	return 0;
-}
-
-/*
- *  get peripheral clock 3 ( SSI )
- */
-static unsigned long perclk3_get_rate(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
-			CCM_PCDR_PCLK3_MASK) >> CCM_PCDR_PCLK3_OFFSET) + 1);
-}
-
-static unsigned long perclk3_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_simple_round_rate(clk, rate, 128);
-}
-
-static int perclk3_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	unsigned int reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 128 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_PCDR);
-	reg &= ~CCM_PCDR_PCLK3_MASK;
-	reg |= div << CCM_PCDR_PCLK3_OFFSET;
-	__raw_writel(reg, CCM_PCDR);
-
-	return 0;
-}
-
-static struct clk perclk[] = {
-	{
-		.id = 0,
-		.parent = &system_clk,
-		.get_rate = perclk1_get_rate,
-		.round_rate = perclk1_round_rate,
-		.set_rate = perclk1_set_rate,
-	}, {
-		.id = 1,
-		.parent = &system_clk,
-		.get_rate = perclk2_get_rate,
-		.round_rate = perclk2_round_rate,
-		.set_rate = perclk2_set_rate,
-	}, {
-		.id = 2,
-		.parent = &system_clk,
-		.get_rate = perclk3_get_rate,
-		.round_rate = perclk3_round_rate,
-		.set_rate = perclk3_set_rate,
-	}
-};
-
-static const struct clk *clko_clocks[] = {
-	&perclk[0],
-	&hclk,
-	&clk48m,
-	&clk16m,
-	&prem_clk,
-	&fclk,
-};
-
-static int clko_set_parent(struct clk *clk, struct clk *parent)
-{
-	int i;
-	unsigned int reg;
-
-	i = _clk_can_use_parent(clko_clocks, ARRAY_SIZE(clko_clocks), parent);
-	if (i < 0)
-		return i;
-
-	reg = __raw_readl(CCM_CSCR) & ~CCM_CSCR_CLKO_MASK;
-	reg |= i << CCM_CSCR_CLKO_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	if (clko_clocks[i]->set_rate && clko_clocks[i]->round_rate) {
-		clk->set_rate = _clk_parent_set_rate;
-		clk->round_rate = _clk_parent_round_rate;
-	} else {
-		clk->set_rate = NULL;
-		clk->round_rate = NULL;
-	}
-
-	return 0;
-}
-
-static struct clk clko_clk = {
-	.set_parent = clko_set_parent,
-};
-
-static struct clk dma_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_DMA_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk csi_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_CSI_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk mma_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_MMA_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk usbd_clk = {
-	.parent = &clk48m,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-	.enable = _clk_enable,
-	.enable_reg = SCM_GCCR,
-	.enable_shift = SCM_GCCR_USBD_CLK_EN_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk gpt_clk = {
-	.parent = &perclk[0],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk uart_clk = {
-	.parent = &perclk[0],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk i2c_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk spi_clk = {
-	.parent = &perclk[1],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk sdhc_clk = {
-	.parent = &perclk[1],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk lcdc_clk = {
-	.parent = &perclk[1],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk mshc_clk = {
-	.parent = &hclk,
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk ssi_clk = {
-	.parent = &perclk[2],
-	.round_rate = _clk_parent_round_rate,
-	.set_rate = _clk_parent_set_rate,
-};
-
-static struct clk rtc_clk = {
-	.parent = &clk32,
-};
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-static struct clk_lookup lookups[] __initdata = {
-	_REGISTER_CLOCK(NULL, "dma", dma_clk)
-	_REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
-	_REGISTER_CLOCK(NULL, "mma", mma_clk)
-	_REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
-	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
-	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
-	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi_clk)
-	_REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
-};
-
-int __init mx1_clocks_init(unsigned long fref)
-{
-	unsigned int reg;
-
-	/* disable clocks we are able to */
-	__raw_writel(0, SCM_GCCR);
-
-	clk32_rate = fref;
-	reg = __raw_readl(CCM_CSCR);
-
-	/* detect clock reference for system PLL */
-	if (reg & CCM_CSCR_SYSTEM_SEL) {
-		prem_clk.parent = &clk16m;
-	} else {
-		/* ensure that oscillator is disabled */
-		reg &= ~(1 << CCM_CSCR_OSC_EN_SHIFT);
-		__raw_writel(reg, CCM_CSCR);
-		prem_clk.parent = &clk32_premult;
-	}
-
-	/* detect reference for CLKO */
-	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
-	clko_clk.parent = (struct clk *)clko_clocks[reg];
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	clk_enable(&hclk);
-	clk_enable(&fclk);
-
-	mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
-
-	return 0;
-}
diff --git a/arch/arm/mach-mx1/crm_regs.h b/arch/arm/mach-mx1/crm_regs.h
deleted file mode 100644
index 22e866ff0c09..000000000000
--- a/arch/arm/mach-mx1/crm_regs.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This file may be distributed under the terms of the GNU General
- * Public License, version 2.
- */
-
-#ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX1_CRM_REGS_H__
-
-#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
-#define SCM_BASE	IO_ADDRESS(SCM_BASE_ADDR)
-
-/* CCM register addresses */
-#define CCM_CSCR	(CCM_BASE + 0x0)
-#define CCM_MPCTL0	(CCM_BASE + 0x4)
-#define CCM_MPCTL1	(CCM_BASE + 0x8)
-#define CCM_SPCTL0	(CCM_BASE + 0xC)
-#define CCM_SPCTL1	(CCM_BASE + 0x10)
-#define CCM_PCDR	(CCM_BASE + 0x20)
-
-#define CCM_CSCR_CLKO_OFFSET	29
-#define CCM_CSCR_CLKO_MASK	(0x7 << 29)
-#define CCM_CSCR_USB_OFFSET	26
-#define CCM_CSCR_USB_MASK	(0x7 << 26)
-#define CCM_CSCR_SPLL_RESTART	(1 << 22)
-#define CCM_CSCR_MPLL_RESTART	(1 << 21)
-#define CCM_CSCR_OSC_EN_SHIFT	17
-#define CCM_CSCR_SYSTEM_SEL	(1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK	(0xF << 10)
-#define CCM_CSCR_PRESC		(1 << 15)
-#define CCM_CSCR_SPEN		(1 << 1)
-#define CCM_CSCR_MPEN		(1 << 0)
-
-#define CCM_PCDR_PCLK3_OFFSET	16
-#define CCM_PCDR_PCLK3_MASK	(0x7F << 16)
-#define CCM_PCDR_PCLK2_OFFSET	4
-#define CCM_PCDR_PCLK2_MASK	(0xF << 4)
-#define CCM_PCDR_PCLK1_OFFSET	0
-#define CCM_PCDR_PCLK1_MASK	0xF
-
-/* SCM register addresses */
-#define SCM_SIDR	(SCM_BASE + 0x0)
-#define SCM_FMCR	(SCM_BASE + 0x4)
-#define SCM_GPCR	(SCM_BASE + 0x8)
-#define SCM_GCCR	(SCM_BASE + 0xC)
-
-#define SCM_GCCR_DMA_CLK_EN_OFFSET	3
-#define SCM_GCCR_CSI_CLK_EN_OFFSET	2
-#define SCM_GCCR_MMA_CLK_EN_OFFSET	1
-#define SCM_GCCR_USBD_CLK_EN_OFFSET	0
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
deleted file mode 100644
index b6be29d1cb08..000000000000
--- a/arch/arm/mach-mx1/devices.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#include "devices.h"
-
-static struct resource imx_csi_resources[] = {
-	{
-		.start  = 0x00224000,
-		.end    = 0x00224010,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = CSI_INT,
-		.end    = CSI_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 imx_csi_dmamask = 0xffffffffUL;
-
-struct platform_device imx_csi_device = {
-	.name           = "mx1-camera",
-	.id             = 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask = &imx_csi_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.resource       = imx_csi_resources,
-	.num_resources  = ARRAY_SIZE(imx_csi_resources),
-};
-
-static struct resource imx_i2c_resources[] = {
-	{
-		.start  = 0x00217000,
-		.end    = 0x00217010,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = I2C_INT,
-		.end    = I2C_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_i2c_device = {
-	.name           = "imx-i2c",
-	.id             = 0,
-	.resource       = imx_i2c_resources,
-	.num_resources  = ARRAY_SIZE(imx_i2c_resources),
-};
-
-static struct resource imx_uart1_resources[] = {
-	{
-		.start	= UART1_BASE_ADDR,
-		.end	= UART1_BASE_ADDR + 0xD0,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= UART1_MINT_RX,
-		.end	= UART1_MINT_RX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART1_MINT_TX,
-		.end	= UART1_MINT_TX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART1_MINT_RTS,
-		.end	= UART1_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_uart1_device = {
-	.name		= "imx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
-	.resource	= imx_uart1_resources,
-};
-
-static struct resource imx_uart2_resources[] = {
-	{
-		.start	= UART2_BASE_ADDR,
-		.end	= UART2_BASE_ADDR + 0xD0,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= UART2_MINT_RX,
-		.end	= UART2_MINT_RX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART2_MINT_TX,
-		.end	= UART2_MINT_TX,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= UART2_MINT_RTS,
-		.end	= UART2_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_uart2_device = {
-	.name		= "imx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
-	.resource	= imx_uart2_resources,
-};
-
-static struct resource imx_rtc_resources[] = {
-	{
-		.start  = 0x00204000,
-		.end    = 0x00204024,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = RTC_INT,
-		.end    = RTC_INT,
-		.flags  = IORESOURCE_IRQ,
-	}, {
-		.start  = RTC_SAMINT,
-		.end    = RTC_SAMINT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_rtc_device = {
-	.name           = "rtc-imx",
-	.id             = 0,
-	.resource       = imx_rtc_resources,
-	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
-};
-
-static struct resource imx_wdt_resources[] = {
-	{
-		.start  = 0x00201000,
-		.end    = 0x00201008,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = WDT_INT,
-		.end    = WDT_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_wdt_device = {
-	.name           = "imx-wdt",
-	.id             = 0,
-	.resource       = imx_wdt_resources,
-	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
-};
-
-static struct resource imx_usb_resources[] = {
-	{
-		.start	= 0x00212000,
-		.end	= 0x00212148,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= USBD_INT0,
-		.end	= USBD_INT0,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT1,
-		.end	= USBD_INT1,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT2,
-		.end	= USBD_INT2,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT3,
-		.end	= USBD_INT3,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT4,
-		.end	= USBD_INT4,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT5,
-		.end	= USBD_INT5,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= USBD_INT6,
-		.end	= USBD_INT6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_usb_device = {
-	.name		= "imx_udc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_usb_resources),
-	.resource	= imx_usb_resources,
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
-		.irq = GPIO_INT_PORTA,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
-		.irq = GPIO_INT_PORTB,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
-		.irq = GPIO_INT_PORTC,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}, {
-		.chip.label = "gpio-3",
-		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
-		.irq = GPIO_INT_PORTD,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	}
-};
-
-int __init mxc_register_gpios(void)
-{
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
diff --git a/arch/arm/mach-mx1/devices.h b/arch/arm/mach-mx1/devices.h
deleted file mode 100644
index 0da5d7cce3a2..000000000000
--- a/arch/arm/mach-mx1/devices.h
+++ /dev/null
@@ -1,7 +0,0 @@
-extern struct platform_device imx_csi_device;
-extern struct platform_device imx_i2c_device;
-extern struct platform_device imx_uart1_device;
-extern struct platform_device imx_uart2_device;
-extern struct platform_device imx_rtc_device;
-extern struct platform_device imx_wdt_device;
-extern struct platform_device imx_usb_device;
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
deleted file mode 100644
index 7f9fc1034c08..000000000000
--- a/arch/arm/mach-mx1/generic.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-static struct map_desc imx_io_desc[] __initdata = {
-	{
-		.virtual	= IMX_IO_BASE,
-		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
-		.length		= IMX_IO_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init mx1_map_io(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX1);
-	mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
-
-	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-void __init mx1_init_irq(void)
-{
-	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
-}
-
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
deleted file mode 100644
index 742fd4e6dcb9..000000000000
--- a/arch/arm/mach-mx2/Kconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-if ARCH_MX2
-
-choice
-	prompt "CPUs:"
-	default MACH_MX21
-
-config MACH_MX21
-	bool "i.MX21 support"
-	select ARCH_MXC_AUDMUX_V1
-	help
-	  This enables support for Freescale's MX2 based i.MX21 processor.
-
-config MACH_MX27
-	bool "i.MX27 support"
-	select ARCH_MXC_AUDMUX_V1
-	help
-	  This enables support for Freescale's MX2 based i.MX27 processor.
-
-endchoice
-
-comment "MX2 platforms:"
-
-config MACH_MX21ADS
-	bool "MX21ADS platform"
-	depends on MACH_MX21
-	help
-	  Include support for MX21ADS platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX27ADS
-	bool "MX27ADS platform"
-	depends on MACH_MX27
-	help
-	  Include support for MX27ADS platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_PCM038
-	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-	depends on MACH_MX27
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_PCM038
-	default MACH_PCM970_BASEBOARD
-
-config MACH_PCM970_BASEBOARD
-	prompt "PHYTEC PCM970 development board"
-	bool
-	help
-	  This adds board specific devices that can be found on Phytec's
-	  PCM970 evaluation board.
-
-endchoice
-
-config MACH_CPUIMX27
-	bool "Eukrea CPUIMX27 module"
-	depends on MACH_MX27
-	help
-	  Include support for Eukrea CPUIMX27 platform. This includes
-	  specific configurations for the module and its peripherals.
-
-config MACH_EUKREA_CPUIMX27_USESDHC2
-	bool "CPUIMX27 integrates SDHC2 module"
-	depends on MACH_CPUIMX27
-	help
-	  This adds support for the internal SDHC2 used on CPUIMX27 used
-	  for wifi or eMMC.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_CPUIMX27
-	default MACH_EUKREA_MBIMX27_BASEBOARD
-
-config MACH_EUKREA_MBIMX27_BASEBOARD
-	prompt "Eukrea MBIMX27 development board"
-	bool
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMX27 evaluation board.
-
-endchoice
-
-config MACH_MX27_3DS
-	bool "MX27PDK platform"
-	depends on MACH_MX27
-	help
-	  Include support for MX27PDK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_IMX27LITE
-	bool "LogicPD MX27 LITEKIT platform"
-	depends on MACH_MX27
-	help
-	  Include support for MX27 LITEKIT platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_PCA100
-	bool "Phytec phyCARD-s (pca100)"
-	depends on MACH_MX27
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for phyCARD-s (aka pca100) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-config MACH_MXT_TD60
-	bool "Maxtrack i-MXT TD60"
-	depends on MACH_MX27
-	help
-	  Include support for i-MXT (aka td60) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
deleted file mode 100644
index e3254faac828..000000000000
--- a/arch/arm/mach-mx2/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y	:=  devices.o serial.o
-
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
-
-obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
-
-obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
-obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
-obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-mx2/Makefile.boot
deleted file mode 100644
index e867398a8fdb..000000000000
--- a/arch/arm/mach-mx2/Makefile.boot
+++ /dev/null
@@ -1,7 +0,0 @@
-zreladdr-$(CONFIG_MACH_MX21)	:= 0xC0008000
-params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
-initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
-
-zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
-params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
-initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
deleted file mode 100644
index bb419ef4d133..000000000000
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ /dev/null
@@ -1,1239 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR		IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
-#define CCM_PCDR0		IO_ADDR_CCM(0x18)
-#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0		IO_ADDR_CCM(0x20)
-#define CCM_PCCR1		IO_ADDR_CCM(0x24)
-#define CCM_CCSR		IO_ADDR_CCM(0x28)
-#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_PRESC_OFFSET	29
-#define CCM_CSCR_PRESC_MASK	(0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET	26
-#define CCM_CSCR_USB_MASK	(0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET	24
-#define CCM_CSCR_SD_MASK	(0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES	(1 << 22)
-#define CCM_CSCR_MPLLRES	(1 << 21)
-#define CCM_CSCR_SSI2_OFFSET	20
-#define CCM_CSCR_SSI2		(1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET	19
-#define CCM_CSCR_SSI1		(1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET	18
-#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP		(1 << 17)
-#define CCM_CSCR_MCU		(1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK	(0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET	9
-#define CCM_CSCR_IPDIV		(1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV	(1 << 4)
-#define CCM_CSCR_OSC26M		(1 << 3)
-#define CCM_CSCR_FPM		(1 << 2)
-#define CCM_CSCR_SPEN		(1 << 1)
-#define CCM_CSCR_MPEN		1
-
-#define CCM_MPCTL0_CPLM		(1 << 31)
-#define CCM_MPCTL0_PD_OFFSET	26
-#define CCM_MPCTL0_PD_MASK	(0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET	16
-#define CCM_MPCTL0_MFD_MASK	(0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET	10
-#define CCM_MPCTL0_MFI_MASK	(0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET	0
-#define CCM_MPCTL0_MFN_MASK	0x3ff
-
-#define CCM_MPCTL1_LF		(1 << 15)
-#define CCM_MPCTL1_BRMO		(1 << 6)
-
-#define CCM_SPCTL0_CPLM		(1 << 31)
-#define CCM_SPCTL0_PD_OFFSET	26
-#define CCM_SPCTL0_PD_MASK	(0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET	16
-#define CCM_SPCTL0_MFD_MASK	(0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET	10
-#define CCM_SPCTL0_MFI_MASK	(0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET	0
-#define CCM_SPCTL0_MFN_MASK	0x3ff
-
-#define CCM_SPCTL1_LF		(1 << 15)
-#define CCM_SPCTL1_BRMO		(1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET	16
-#define CCM_OSC26MCTL_PEAK_MASK		(0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET	8
-#define CCM_OSC26MCTL_AGC_MASK		(0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET	0
-#define CCM_OSC26MCTL_ANATEST_MASK	0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET	26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK	(0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET	16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK	(0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET		12
-#define CCM_PCDR0_NFCDIV_MASK		(0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET		5
-#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET	0
-#define CCM_PCDR0_FIRIDIV_MASK		0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET	24
-#define CCM_PCDR1_PERDIV4_MASK		(0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET	16
-#define CCM_PCDR1_PERDIV3_MASK		(0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET	8
-#define CCM_PCDR1_PERDIV2_MASK		(0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET	0
-#define CCM_PCDR1_PERDIV1_MASK		0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET	31
-#define CCM_PCCR_HCLK_CSI_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET	30
-#define CCM_PCCR_HCLK_DMA_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET	28
-#define CCM_PCCR_HCLK_BROM_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET	27
-#define CCM_PCCR_HCLK_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET	26
-#define CCM_PCCR_HCLK_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET	25
-#define CCM_PCCR_HCLK_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET	24
-#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET	23
-#define CCM_PCCR_BMI_MASK		(1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG		CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET		22
-#define CCM_PCCR_PERCLK4_REG		CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET		21
-#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET	20
-#define CCM_PCCR_FIRI_BAUD_MASK		(1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET		19
-#define CCM_PCCR_NFC_REG		CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET		18
-#define CCM_PCCR_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET	17
-#define CCM_PCCR_SSI1_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET	16
-#define CCM_PCCR_SSI2_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET		15
-#define CCM_PCCR_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET		14
-#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET		13
-#define CCM_PCCR_DMA_REG		CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET		12
-#define CCM_PCCR_I2C1_REG		CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET		11
-#define CCM_PCCR_GPIO_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET		10
-#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET		9
-#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET		8
-#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET	7
-#define CCM_PCCR_SSI2_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET	6
-#define CCM_PCCR_SSI1_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET		5
-#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET		4
-#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET		3
-#define CCM_PCCR_UART4_REG		CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET		2
-#define CCM_PCCR_UART3_REG		CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET		1
-#define CCM_PCCR_UART2_REG		CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET		0
-#define CCM_PCCR_UART1_REG		CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET		31
-#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET		30
-#define CCM_PCCR_KPP_REG		CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET		29
-#define CCM_PCCR_RTC_REG		CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET		28
-#define CCM_PCCR_PWM_REG		CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET		27
-#define CCM_PCCR_GPT3_REG		CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET		26
-#define CCM_PCCR_GPT2_REG		CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET		25
-#define CCM_PCCR_GPT1_REG		CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET		24
-#define CCM_PCCR_WDT_REG		CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET		23
-#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK		(1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK		(1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK		(1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK		(1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK		(1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK		(1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK		(1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK		(1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK		(1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK		(1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK		(1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK		(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK		(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK		(1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK		(1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK		(1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK		(1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK		(1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK		(1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK		(1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK		(1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK		(1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK		(1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK		(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK		(1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK		(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK		(1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK		(1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK		(1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK		(1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK		(1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK		(1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK		(1 << CCM_PCCR_WDT_OFFSET)
-
-#define CCM_CCSR_32KSR		(1 << 15)
-
-#define CCM_CCSR_CLKMODE1	(1 << 9)
-#define CCM_CCSR_CLKMODE0	(1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK	0x1f
-
-#define SYS_FMCR		0x14	/* Functional Muxing Control Reg */
-#define SYS_CHIP_ID		0x00	/* The offset of CHIP ID register */
-
-static int _clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-	return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long _clk_generic_round_rate(struct clk *clk,
-			unsigned long rate,
-			u32 max_divisor)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > max_divisor)
-		div = max_divisor;
-
-	return parent_rate / div;
-}
-
-static int _clk_spll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg |= CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-
-	while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
-		;
-	return 0;
-}
-
-static void _clk_spll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-}
-
-
-#define CSCR() (__raw_readl(CCM_CSCR))
-#define PCDR0() (__raw_readl(CCM_PCDR0))
-#define PCDR1() (__raw_readl(CCM_PCDR1))
-
-static unsigned long _clk_perclkx_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 64);
-}
-
-static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return -EINVAL;
-
-	div = parent_rate / rate;
-	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg =
-	    __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
-				       (clk->id << 3));
-	reg |= div << (clk->id << 3);
-	__raw_writel(reg, CCM_PCDR1);
-
-	return 0;
-}
-
-static unsigned long _clk_usb_recalc(struct clk *clk)
-{
-	unsigned long usb_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
-
-	return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long _clk_usb_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = CSCR() & ~CCM_CSCR_USB_MASK;
-	reg |= div << CCM_CSCR_USB_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
-
-	return 2UL * parent_rate / pdf;
-}
-
-static unsigned long _clk_ssi1_recalc(struct clk *clk)
-{
-	return _clk_ssix_recalc(clk,
-		(PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
-		>> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_ssi2_recalc(struct clk *clk)
-{
-	return _clk_ssix_recalc(clk,
-		(PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
-		CCM_PCDR0_SSI2BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_nfc_recalc(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
-		>> CCM_PCDR0_NFCDIV_OFFSET;
-
-	return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->round_rate(clk->parent, rate);
-}
-
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->set_rate(clk->parent, rate);
-}
-
-static unsigned long external_high_reference; /* in Hz */
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz.
- */
-static struct clk ckih_clk = {
-	.get_rate = get_high_reference_clock_rate,
-};
-
-static unsigned long external_low_reference; /* in Hz */
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
-	.get_rate = get_low_reference_clock_rate,
-};
-
-
-static unsigned long _clk_fpm_recalc(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) * 512;
-}
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
-	.parent = &ckil_clk,
-	.get_rate = _clk_fpm_recalc,
-};
-
-static unsigned long get_mpll_clk(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
-
-	ref_clk = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_MPCTL0);
-	pdf = (reg & CCM_MPCTL0_PD_MASK)  >> CCM_MPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
-}
-
-static struct clk mpll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_mpll_clk,
-};
-
-static unsigned long _clk_fclk_get_rate(struct clk *clk)
-{
-	unsigned long parent_rate;
-	u32 div;
-
-	div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
-	parent_rate = clk_get_rate(clk->parent);
-
-	return parent_rate / (div+1);
-}
-
-static struct clk fclk_clk = {
-	.parent = &mpll_clk,
-	.get_rate = _clk_fclk_get_rate
-};
-
-static unsigned long get_spll_clk(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
-
-	ref_clk = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_SPCTL0);
-	pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
-}
-
-static struct clk spll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_spll_clk,
-	.enable = _clk_spll_enable,
-	.disable = _clk_spll_disable,
-};
-
-static unsigned long get_hclk_clk(struct clk *clk)
-{
-	unsigned long rate;
-	unsigned long bclk_pdf;
-
-	bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
-		>> CCM_CSCR_BCLK_OFFSET;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (bclk_pdf + 1);
-}
-
-static struct clk hclk_clk = {
-	.parent = &fclk_clk,
-	.get_rate = get_hclk_clk,
-};
-
-static unsigned long get_ipg_clk(struct clk *clk)
-{
-	unsigned long rate;
-	unsigned long ipg_pdf;
-
-	ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (ipg_pdf + 1);
-}
-
-static struct clk ipg_clk = {
-	.parent = &hclk_clk,
-	.get_rate = get_ipg_clk,
-};
-
-static unsigned long _clk_perclkx_recalc(struct clk *clk)
-{
-	unsigned long perclk_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return 0;
-
-	perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
-
-	return parent_rate / (perclk_pdf + 1);
-}
-
-static struct clk per_clk[] = {
-	{
-		.id = 0,
-		.parent = &mpll_clk,
-		.get_rate = _clk_perclkx_recalc,
-	}, {
-		.id = 1,
-		.parent = &mpll_clk,
-		.get_rate = _clk_perclkx_recalc,
-	}, {
-		.id = 2,
-		.parent = &mpll_clk,
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		/* Enable/Disable done via lcd_clkc[1] */
-	}, {
-		.id = 3,
-		.parent = &mpll_clk,
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		/* Enable/Disable done via csi_clk[1] */
-	},
-};
-
-static struct clk uart_ipg_clk[];
-
-static struct clk uart_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[2],
-	}, {
-		.id = 3,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[3],
-	},
-};
-
-static struct clk uart_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART1_REG,
-		.enable_shift = CCM_PCCR_UART1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART2_REG,
-		.enable_shift = CCM_PCCR_UART2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART3_REG,
-		.enable_shift = CCM_PCCR_UART3_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART4_REG,
-		.enable_shift = CCM_PCCR_UART4_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt_ipg_clk[];
-
-static struct clk gpt_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[2],
-	},
-};
-
-static struct clk gpt_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT1_REG,
-		.enable_shift = CCM_PCCR_GPT1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT2_REG,
-		.enable_shift = CCM_PCCR_GPT2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT3_REG,
-		.enable_shift = CCM_PCCR_GPT3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk pwm_clk[] = {
-	{
-		.parent = &per_clk[0],
-		.secondary = &pwm_clk[1],
-	}, {
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_PWM_REG,
-		.enable_shift = CCM_PCCR_PWM_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk sdhc_ipg_clk[];
-
-static struct clk sdhc_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &sdhc_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &sdhc_ipg_clk[1],
-	},
-};
-
-static struct clk sdhc_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SDHC1_REG,
-		.enable_shift = CCM_PCCR_SDHC1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SDHC2_REG,
-		.enable_shift = CCM_PCCR_SDHC2_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk cspi_ipg_clk[];
-
-static struct clk cspi_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[2],
-	},
-};
-
-static struct clk cspi_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI1_REG,
-		.enable_shift = CCM_PCCR_CSPI1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI2_REG,
-		.enable_shift = CCM_PCCR_CSPI2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI3_REG,
-		.enable_shift = CCM_PCCR_CSPI3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk lcdc_clk[] = {
-	{
-		.parent = &per_clk[2],
-		.secondary = &lcdc_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.parent = &ipg_clk,
-		.secondary = &lcdc_clk[2],
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_LCDC_REG,
-		.enable_shift = CCM_PCCR_LCDC_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_LCDC_REG,
-		.enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk csi_clk[] = {
-	{
-		.parent = &per_clk[3],
-		.secondary = &csi_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_CSI_REG,
-		.enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk usb_clk[] = {
-	{
-		.parent = &spll_clk,
-		.secondary = &usb_clk[1],
-		.get_rate = _clk_usb_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_USBOTG_REG,
-		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
-		.disable = _clk_disable,
-		.round_rate = _clk_usb_round_rate,
-		.set_rate = _clk_usb_set_rate,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
-		.enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk ssi_ipg_clk[];
-
-static struct clk ssi_clk[] = {
-	{
-		.id = 0,
-		.parent = &mpll_clk,
-		.secondary = &ssi_ipg_clk[0],
-		.get_rate = _clk_ssi1_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI1_BAUD_REG,
-		.enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &mpll_clk,
-		.secondary = &ssi_ipg_clk[1],
-		.get_rate = _clk_ssi2_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI2_BAUD_REG,
-		.enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk ssi_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI1_REG,
-		.enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI2_REG,
-		.enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-
-static struct clk nfc_clk = {
-	.parent = &fclk_clk,
-	.get_rate = _clk_nfc_recalc,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_NFC_REG,
-	.enable_shift = CCM_PCCR_NFC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk dma_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_DMA_REG,
-		.enable_shift = CCM_PCCR_DMA_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &dma_clk[1],
-	},  {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_DMA_REG,
-		.enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk brom_clk = {
-	.parent = &hclk_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_HCLK_BROM_REG,
-	.enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk emma_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_EMMA_REG,
-		.enable_shift = CCM_PCCR_EMMA_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &emma_clk[1],
-	}, {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_EMMA_REG,
-		.enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk slcdc_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SLCDC_REG,
-		.enable_shift = CCM_PCCR_SLCDC_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &slcdc_clk[1],
-	}, {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
-		.enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk wdog_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_WDT_REG,
-	.enable_shift = CCM_PCCR_WDT_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk gpio_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_GPIO_REG,
-	.enable_shift = CCM_PCCR_GPIO_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk i2c_clk = {
-	.id = 0,
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_I2C1_REG,
-	.enable_shift = CCM_PCCR_I2C1_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_KPP_REG,
-	.enable_shift = CCM_PCCR_KPP_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk owire_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_OWIRE_REG,
-	.enable_shift = CCM_PCCR_OWIRE_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk rtc_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_RTC_REG,
-	.enable_shift = CCM_PCCR_RTC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = __raw_readl(CCM_PCDR0);
-
-	if (clk->parent == &usb_clk[0]) {
-		reg &= ~CCM_PCDR0_48MDIV_MASK;
-		reg |= div << CCM_PCDR0_48MDIV_OFFSET;
-	}
-	__raw_writel(reg, CCM_PCDR0);
-
-	return 0;
-}
-
-static unsigned long _clk_clko_recalc(struct clk *clk)
-{
-	u32 div = 0;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->parent == &usb_clk[0]) /* 48M */
-		div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
-			 >> CCM_PCDR0_48MDIV_OFFSET;
-	div++;
-
-	return parent_rate / div;
-}
-
-static struct clk clko_clk;
-
-static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
-
-	if (parent == &ckil_clk)
-		reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &fpm_clk)
-		reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ckih_clk)
-		reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == mpll_clk.parent)
-		reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == spll_clk.parent)
-		reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &mpll_clk)
-		reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &spll_clk)
-		reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &fclk_clk)
-		reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &hclk_clk)
-		reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ipg_clk)
-		reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[0])
-		reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[1])
-		reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[2])
-		reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[3])
-		reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi_clk[0])
-		reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi_clk[1])
-		reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &nfc_clk)
-		reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &usb_clk[0])
-		reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &clko_clk)
-		reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, CCM_CCSR);
-
-	return 0;
-}
-
-static struct clk clko_clk = {
-	.get_rate = _clk_clko_recalc,
-	.set_rate = _clk_clko_set_rate,
-	.round_rate = _clk_clko_round_rate,
-	.set_parent = _clk_clko_set_parent,
-};
-
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-static struct clk_lookup lookups[] = {
-/* It's unlikely that any driver wants one of them directly:
-	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
-	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
-	_REGISTER_CLOCK(NULL, "fpm", fpm_clk)
-	_REGISTER_CLOCK(NULL, "mpll", mpll_clk)
-	_REGISTER_CLOCK(NULL, "spll", spll_clk)
-	_REGISTER_CLOCK(NULL, "fclk", fclk_clk)
-	_REGISTER_CLOCK(NULL, "hclk", hclk_clk)
-	_REGISTER_CLOCK(NULL, "ipg", ipg_clk)
-*/
-	_REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
-	_REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
-	_REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
-	_REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
-	_REGISTER_CLOCK(NULL, "clko", clko_clk)
-	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
-	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
-	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
-	_REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
-	_REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
-	_REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
-	_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
-	_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
-	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
-	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
-	_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
-	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
-	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
-	_REGISTER_CLOCK(NULL, "brom", brom_clk)
-	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
-	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
-	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
-	_REGISTER_CLOCK(NULL, "owire", owire_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-};
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx21_clocks_init(unsigned long lref, unsigned long href)
-{
-	u32 cscr;
-
-	external_low_reference = lref;
-	external_high_reference = href;
-
-	/* detect clock reference for both system PLL */
-	cscr = CSCR();
-	if (cscr & CCM_CSCR_MCU)
-		mpll_clk.parent = &ckih_clk;
-	else
-		mpll_clk.parent = &fpm_clk;
-
-	if (cscr & CCM_CSCR_SP)
-		spll_clk.parent = &ckih_clk;
-	else
-		spll_clk.parent = &fpm_clk;
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clock gates */
-	__raw_writel(0, CCM_PCCR0);
-	__raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
-
-	/* This turns of the serial PLL as well */
-	spll_clk.disable(&spll_clk);
-
-	/* This will propagate to all children and init all the clock rates. */
-	clk_enable(&per_clk[0]);
-	clk_enable(&gpio_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	clk_enable(&uart_clk[0]);
-#endif
-
-	mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
-			MX21_INT_GPT1);
-	return 0;
-}
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
deleted file mode 100644
index 0f0823c8b170..000000000000
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ /dev/null
@@ -1,763 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR		IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
-#define CCM_PCDR0		IO_ADDR_CCM(0x18)
-#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0		IO_ADDR_CCM(0x20)
-#define CCM_PCCR1		IO_ADDR_CCM(0x24)
-#define CCM_CCSR		IO_ADDR_CCM(0x28)
-#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_UPDATE_DIS	(1 << 31)
-#define CCM_CSCR_SSI2		(1 << 23)
-#define CCM_CSCR_SSI1		(1 << 22)
-#define CCM_CSCR_VPU		(1 << 21)
-#define CCM_CSCR_MSHC           (1 << 20)
-#define CCM_CSCR_SPLLRES        (1 << 19)
-#define CCM_CSCR_MPLLRES        (1 << 18)
-#define CCM_CSCR_SP             (1 << 17)
-#define CCM_CSCR_MCU            (1 << 16)
-#define CCM_CSCR_OSC26MDIV      (1 << 4)
-#define CCM_CSCR_OSC26M         (1 << 3)
-#define CCM_CSCR_FPM            (1 << 2)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           (1 << 0)
-
-/* i.MX27 TO 2+ */
-#define CCM_CSCR_ARM_SRC        (1 << 15)
-
-#define CCM_SPCTL1_LF           (1 << 15)
-#define CCM_SPCTL1_BRMO         (1 << 6)
-
-static struct clk mpll_main1_clk, mpll_main2_clk;
-
-static int clk_pccr_enable(struct clk *clk)
-{
-	unsigned long reg;
-
-	if (!clk->enable_reg)
-		return 0;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void clk_pccr_disable(struct clk *clk)
-{
-	unsigned long reg;
-
-	if (!clk->enable_reg)
-		return;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int clk_spll_enable(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg |= CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-
-	while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
-
-	return 0;
-}
-
-static void clk_spll_disable(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-}
-
-static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
-{
-	int cscr = __raw_readl(CCM_CSCR);
-
-	if (clk->parent == parent)
-		return 0;
-
-	if (mx27_revision() >= CHIP_REV_2_0) {
-		if (parent == &mpll_main1_clk) {
-			cscr |= CCM_CSCR_ARM_SRC;
-		} else {
-			if (parent == &mpll_main2_clk)
-				cscr &= ~CCM_CSCR_ARM_SRC;
-			else
-				return -EINVAL;
-		}
-		__raw_writel(cscr, CCM_CSCR);
-		clk->parent = parent;
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
-{
-	int div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 4)
-		div = 4;
-
-	return parent_rate / div;
-}
-
-static int set_rate_cpu(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	uint32_t reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 4 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_CSCR);
-	if (mx27_revision() >= CHIP_REV_2_0) {
-		reg &= ~(3 << 12);
-		reg |= div << 12;
-		reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
-		__raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
-	} else {
-		printk(KERN_ERR "Can't set CPU frequency!\n");
-	}
-
-	return 0;
-}
-
-static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 64)
-		div = 64;
-
-	return parent_rate / div;
-}
-
-static int set_rate_per(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return -EINVAL;
-
-	div = parent_rate / rate;
-	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
-	reg |= div << (clk->id << 3);
-	__raw_writel(reg, CCM_PCDR1);
-
-	return 0;
-}
-
-static unsigned long get_rate_usb(struct clk *clk)
-{
-	unsigned long usb_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
-
-	return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		pdf += 4;  /* MX27 TO2+ */
-	else
-		pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
-
-	return 2UL * parent_rate / pdf;
-}
-
-static unsigned long get_rate_ssi1(struct clk *clk)
-{
-	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
-}
-
-static unsigned long get_rate_ssi2(struct clk *clk)
-{
-	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
-	else
-		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
-
-	return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long get_rate_vpu(struct clk *clk)
-{
-	unsigned long vpu_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= CHIP_REV_2_0) {
-		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
-		vpu_pdf += 4;
-	} else {
-		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
-		vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
-	}
-
-	return 2UL * parent_rate / vpu_pdf;
-}
-
-static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->round_rate(clk->parent, rate);
-}
-
-static unsigned long get_rate_parent(struct clk *clk)
-{
-	return clk_get_rate(clk->parent);
-}
-
-static int set_rate_parent(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->set_rate(clk->parent, rate);
-}
-
-/* in Hz */
-static unsigned long external_high_reference = 26000000;
-
-static unsigned long get_rate_high_reference(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-/* in Hz */
-static unsigned long external_low_reference = 32768;
-
-static unsigned long get_rate_low_reference(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-static unsigned long get_rate_fpm(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) * 1024;
-}
-
-static unsigned long get_rate_mpll(struct clk *clk)
-{
-	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
-			clk_get_rate(clk->parent));
-}
-
-static unsigned long get_rate_mpll_main(struct clk *clk)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	/* i.MX27 TO2:
-	 * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
-	 * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
-	 */
-	if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
-		return 2UL * parent_rate / 3UL;
-
-	return parent_rate;
-}
-
-static unsigned long get_rate_spll(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long rate;
-
-	rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_SPCTL0);
-
-	/* On TO2 we have to write the value back. Otherwise we
-	 * read 0 from this register the next time.
-	 */
-	if (mx27_revision() >= CHIP_REV_2_0)
-		__raw_writel(reg, CCM_SPCTL0);
-
-	return mxc_decode_pll(reg, rate);
-}
-
-static unsigned long get_rate_cpu(struct clk *clk)
-{
-	u32 div;
-	unsigned long rate;
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
-	else
-		div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (div + 1);
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
-	unsigned long rate, bclk_pdf;
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
-	else
-		bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (bclk_pdf + 1);
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
-	unsigned long rate, ipg_pdf;
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		return clk_get_rate(clk->parent);
-	else
-		ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (ipg_pdf + 1);
-}
-
-static unsigned long get_rate_per(struct clk *clk)
-{
-	unsigned long perclk_pdf, parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return 0;
-
-	perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
-
-	return parent_rate / (perclk_pdf + 1);
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz. Could be changed at runtime
- * with a call to change_external_high_reference()
- */
-static struct clk ckih_clk = {
-	.get_rate	= get_rate_high_reference,
-};
-
-static struct clk mpll_clk = {
-	.parent		= &ckih_clk,
-	.get_rate	= get_rate_mpll,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
- * It provides the clock source whose rate is same as MPLL
- */
-static struct clk mpll_main1_clk = {
-	.id		= 0,
-	.parent		= &mpll_clk,
-	.get_rate	= get_rate_mpll_main,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
- * It provides the clock source whose rate is same MPLL * 2 / 3
- */
-static struct clk mpll_main2_clk = {
-	.id		= 1,
-	.parent		= &mpll_clk,
-	.get_rate	= get_rate_mpll_main,
-};
-
-static struct clk ahb_clk = {
-	.parent		= &mpll_main2_clk,
-	.get_rate	= get_rate_ahb,
-};
-
-static struct clk ipg_clk = {
-	.parent		= &ahb_clk,
-	.get_rate	= get_rate_ipg,
-};
-
-static struct clk cpu_clk = {
-	.parent = &mpll_main2_clk,
-	.set_parent = clk_cpu_set_parent,
-	.round_rate = round_rate_cpu,
-	.get_rate = get_rate_cpu,
-	.set_rate = set_rate_cpu,
-};
-
-static struct clk spll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_rate_spll,
-	.enable = clk_spll_enable,
-	.disable = clk_spll_disable,
-};
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
-	.get_rate = get_rate_low_reference,
-};
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
-	.parent = &ckil_clk,
-	.get_rate = get_rate_fpm,
-};
-
-#define PCCR0 CCM_PCCR0
-#define PCCR1 CCM_PCCR1
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.enable		= clk_pccr_enable,	\
-		.disable	= clk_pccr_disable,	\
-		.secondary	= s,			\
-		.parent		= p,			\
-	}
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
-	static struct clk name = {				\
-		.id		= i,				\
-		.enable_reg	= er,				\
-		.enable_shift	= es,				\
-		.get_rate	= get_rate_##getsetround,	\
-		.set_rate	= set_rate_##getsetround,	\
-		.round_rate	= round_rate_##getsetround,	\
-		.enable		= clk_pccr_enable,		\
-		.disable	= clk_pccr_disable,		\
-		.secondary	= s,				\
-		.parent		= p,				\
-	}
-
-/* Forward declaration to keep the following list in order */
-static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
-		  dma_clk1, lcdc_clk2, vpu_clk1;
-
-/* All clocks we can gate through PCCRx in the order of PCCRx bits */
-DEFINE_CLOCK(ssi2_clk1,    1, PCCR0,  0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ssi1_clk1,    0, PCCR0,  1, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(slcdc_clk,    0, PCCR0,  2, NULL, &slcdc_clk1, &ahb_clk);
-DEFINE_CLOCK(sdhc3_clk1,   0, PCCR0,  3, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc2_clk1,   0, PCCR0,  4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc1_clk1,   0, PCCR0,  5, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(scc_clk,      0, PCCR0,  6, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sahara2_clk,  0, PCCR0,  7, NULL, &sahara2_clk1, &ahb_clk);
-DEFINE_CLOCK(rtic_clk,     0, PCCR0,  8, NULL, &rtic_clk1, &ahb_clk);
-DEFINE_CLOCK(rtc_clk,      0, PCCR0,  9, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk1,     0, PCCR0, 11, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(owire_clk,    0, PCCR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mstick_clk1,  0, PCCR0, 13, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(lcdc_clk1,    0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
-DEFINE_CLOCK(kpp_clk,      0, PCCR0, 15, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(iim_clk,      0, PCCR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c2_clk,     1, PCCR0, 17, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c1_clk,     0, PCCR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt6_clk1,    0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt5_clk1,    0, PCCR0, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt4_clk1,    0, PCCR0, 21, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt3_clk1,    0, PCCR0, 22, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt2_clk1,    0, PCCR0, 23, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt1_clk1,    0, PCCR0, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpio_clk,     0, PCCR0, 25, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(fec_clk,      0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
-DEFINE_CLOCK(emma_clk,     0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
-DEFINE_CLOCK(dma_clk,      0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
-DEFINE_CLOCK(cspi13_clk1,  0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk1,   0, PCCR0, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi1_clk1,   0, PCCR0, 31, NULL, NULL, &ipg_clk);
-
-DEFINE_CLOCK(mstick_clk,   0, PCCR1,  2, NULL, &mstick_clk1, &ipg_clk);
-DEFINE_CLOCK(nfc_clk,      0, PCCR1,  3, get_rate_nfc, NULL, &cpu_clk);
-DEFINE_CLOCK(ssi2_clk,     1, PCCR1,  4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(ssi1_clk,     0, PCCR1,  5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(vpu_clk,      0, PCCR1,  6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
-DEFINE_CLOCK1(per4_clk,    3, PCCR1,  7, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per3_clk,    2, PCCR1,  8, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per2_clk,    1, PCCR1,  9, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per1_clk,    0, PCCR1, 10, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK(usb_clk1,     0, PCCR1, 11, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(slcdc_clk1,   0, PCCR1, 12, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk1,    0, PCCR1, 14, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(lcdc_clk2,    0, PCCR1, 15, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(vpu_clk1,     0, PCCR1, 16, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(fec_clk1,     0, PCCR1, 17, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emma_clk1,    0, PCCR1, 18, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk,      0, PCCR1, 19, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(dma_clk1,     0, PCCR1, 20, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(csi_clk1,     0, PCCR1, 21, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(brom_clk,     0, PCCR1, 22, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(ata_clk,      0, PCCR1, 23, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(wdog_clk,     0, PCCR1, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk,      0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
-DEFINE_CLOCK(uart6_clk1,   0, PCCR1, 26, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart5_clk1,   0, PCCR1, 27, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart4_clk1,   0, PCCR1, 28, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart3_clk1,   0, PCCR1, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart2_clk1,   0, PCCR1, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk1,   0, PCCR1, 31, NULL, NULL, &ipg_clk);
-
-/* Clocks we cannot directly gate, but drivers need their rates */
-DEFINE_CLOCK(cspi1_clk,    0, 0,      0, NULL, &cspi1_clk1, &per2_clk);
-DEFINE_CLOCK(cspi2_clk,    1, 0,      0, NULL, &cspi2_clk1, &per2_clk);
-DEFINE_CLOCK(cspi3_clk,    2, 0,      0, NULL, &cspi13_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc1_clk,    0, 0,      0, NULL, &sdhc1_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc2_clk,    1, 0,      0, NULL, &sdhc2_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc3_clk,    2, 0,      0, NULL, &sdhc3_clk1, &per2_clk);
-DEFINE_CLOCK(pwm_clk,      0, 0,      0, NULL, &pwm_clk1, &per1_clk);
-DEFINE_CLOCK(gpt1_clk,     0, 0,      0, NULL, &gpt1_clk1, &per1_clk);
-DEFINE_CLOCK(gpt2_clk,     1, 0,      0, NULL, &gpt2_clk1, &per1_clk);
-DEFINE_CLOCK(gpt3_clk,     2, 0,      0, NULL, &gpt3_clk1, &per1_clk);
-DEFINE_CLOCK(gpt4_clk,     3, 0,      0, NULL, &gpt4_clk1, &per1_clk);
-DEFINE_CLOCK(gpt5_clk,     4, 0,      0, NULL, &gpt5_clk1, &per1_clk);
-DEFINE_CLOCK(gpt6_clk,     5, 0,      0, NULL, &gpt6_clk1, &per1_clk);
-DEFINE_CLOCK(uart1_clk,    0, 0,      0, NULL, &uart1_clk1, &per1_clk);
-DEFINE_CLOCK(uart2_clk,    1, 0,      0, NULL, &uart2_clk1, &per1_clk);
-DEFINE_CLOCK(uart3_clk,    2, 0,      0, NULL, &uart3_clk1, &per1_clk);
-DEFINE_CLOCK(uart4_clk,    3, 0,      0, NULL, &uart4_clk1, &per1_clk);
-DEFINE_CLOCK(uart5_clk,    4, 0,      0, NULL, &uart5_clk1, &per1_clk);
-DEFINE_CLOCK(uart6_clk,    5, 0,      0, NULL, &uart6_clk1, &per1_clk);
-DEFINE_CLOCK1(lcdc_clk,    0, 0,      0, parent, &lcdc_clk1, &per3_clk);
-DEFINE_CLOCK1(csi_clk,     0, 0,      0, parent, &csi_clk1, &per4_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk)
-	_REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
-	_REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
-	_REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
-	_REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
-	_REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
-	_REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
-	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
-	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK(NULL, "csi", csi_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
-	_REGISTER_CLOCK(NULL, "dma", dma_clk)
-	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
-	_REGISTER_CLOCK(NULL, "brom", brom_clk)
-	_REGISTER_CLOCK(NULL, "emma", emma_clk)
-	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
-	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
-	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
-	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-};
-
-/* Adjust the clock path for TO2 and later */
-static void __init to2_adjust_clocks(void)
-{
-	unsigned long cscr = __raw_readl(CCM_CSCR);
-
-	if (mx27_revision() >= CHIP_REV_2_0) {
-		if (cscr & CCM_CSCR_ARM_SRC)
-			cpu_clk.parent = &mpll_main1_clk;
-
-		if (!(cscr & CCM_CSCR_SSI2))
-			ssi1_clk.parent = &spll_clk;
-
-		if (!(cscr & CCM_CSCR_SSI1))
-			ssi1_clk.parent = &spll_clk;
-
-		if (!(cscr & CCM_CSCR_VPU))
-			vpu_clk.parent = &spll_clk;
-	} else {
-		cpu_clk.parent = &mpll_clk;
-		cpu_clk.set_parent = NULL;
-		cpu_clk.round_rate = NULL;
-		cpu_clk.set_rate = NULL;
-		ahb_clk.parent = &mpll_clk;
-
-		per1_clk.parent = &mpll_clk;
-		per2_clk.parent = &mpll_clk;
-		per3_clk.parent = &mpll_clk;
-		per4_clk.parent = &mpll_clk;
-
-		ssi1_clk.parent = &mpll_clk;
-		ssi2_clk.parent = &mpll_clk;
-
-		vpu_clk.parent = &mpll_clk;
-	}
-}
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx27_clocks_init(unsigned long fref)
-{
-	u32 cscr = __raw_readl(CCM_CSCR);
-
-	external_high_reference = fref;
-
-	/* detect clock reference for both system PLLs */
-	if (cscr & CCM_CSCR_MCU)
-		mpll_clk.parent = &ckih_clk;
-	else
-		mpll_clk.parent = &fpm_clk;
-
-	if (cscr & CCM_CSCR_SP)
-		spll_clk.parent = &ckih_clk;
-	else
-		spll_clk.parent = &fpm_clk;
-
-	to2_adjust_clocks();
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clocks we do not need */
-	__raw_writel(0, CCM_PCCR0);
-	__raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
-
-	spll_clk.disable(&spll_clk);
-
-	/* enable basic clocks */
-	clk_enable(&per1_clk);
-	clk_enable(&gpio_clk);
-	clk_enable(&emi_clk);
-	clk_enable(&iim_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	clk_enable(&uart1_clk);
-#endif
-
-	mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
-			MX27_INT_GPT1);
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
deleted file mode 100644
index a0aeb8a4adc1..000000000000
--- a/arch/arm/mach-mx2/devices.c
+++ /dev/null
@@ -1,503 +0,0 @@
-/*
- * Author: MontaVista Software, Inc.
- *       <source@mvista.com>
- *
- * Based on the OMAP devices.c
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-/*
- * SPI master controller
- *
- * - i.MX1: 2 channel (slighly different register setting)
- * - i.MX21: 2 channel
- * - i.MX27: 3 channel
- */
-#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq)					\
-	static struct resource mxc_spi_resources ## n[] = {			\
-		{								\
-			.start = baseaddr,					\
-			.end = baseaddr + SZ_4K - 1,				\
-			.flags = IORESOURCE_MEM,				\
-		}, {								\
-			.start = irq,						\
-			.end = irq,						\
-			.flags = IORESOURCE_IRQ,				\
-		},								\
-	};									\
-										\
-	struct platform_device mxc_spi_device ## n = {				\
-		.name = "spi_imx",						\
-		.id = n,							\
-		.num_resources = ARRAY_SIZE(mxc_spi_resources ## n),		\
-		.resource = mxc_spi_resources ## n,				\
-	}
-
-DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
-DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
-#endif
-
-/*
- * General Purpose Timer
- * - i.MX21: 3 timers
- * - i.MX27: 6 timers
- */
-#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq)				\
-	static struct resource timer ## n ##_resources[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}							\
-	};								\
-									\
-	struct platform_device mxc_gpt ## n = {				\
-		.name = "imx_gpt",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(timer ## n ## _resources),	\
-		.resource = timer ## n ## _resources,			\
-	}
-
-/* We use gpt1 as system timer, so do not add a device for this one */
-DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
-DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
-DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
-DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
-#endif
-
-/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
-static struct resource mxc_wdt_resources[] = {
-	{
-		.start = MX2x_WDOG_BASE_ADDR,
-		.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_wdt = {
-	.name = "imx2-wdt",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
-	.resource = mxc_wdt_resources,
-};
-
-static struct resource mxc_w1_master_resources[] = {
-	{
-		.start = MX2x_OWIRE_BASE_ADDR,
-		.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_w1_master_device = {
-	.name = "mxc_w1",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
-	.resource = mxc_w1_master_resources,
-};
-
-#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq)			\
-	static struct resource pfx ## _nand_resources[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		},							\
-	};								\
-									\
-	struct platform_device pfx ## _nand_device = {			\
-		.name = "mxc_nand",					\
-		.id = 0,						\
-		.num_resources = ARRAY_SIZE(pfx ## _nand_resources),	\
-		.resource = pfx ## _nand_resources,			\
-	}
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
-#endif
-
-/*
- * lcdc:
- * - i.MX1: the basic controller
- * - i.MX21: to be checked
- * - i.MX27: like i.MX1, with slightly variations
- */
-static struct resource mxc_fb[] = {
-	{
-		.start = MX2x_LCDC_BASE_ADDR,
-		.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_LCDC,
-		.end = MX2x_INT_LCDC,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* mxc lcd driver */
-struct platform_device mxc_fb_device = {
-	.name = "imx-fb",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fb),
-	.resource = mxc_fb,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-#ifdef CONFIG_MACH_MX27
-static struct resource mxc_fec_resources[] = {
-	{
-		.start = MX27_FEC_BASE_ADDR,
-		.end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_FEC,
-		.end = MX27_INT_FEC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_fec_device = {
-	.name = "fec",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fec_resources),
-	.resource = mxc_fec_resources,
-};
-#endif
-
-#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq)				\
-	static struct resource mxc_i2c_resources ## n[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}							\
-	};								\
-									\
-	struct platform_device mxc_i2c_device ## n = {			\
-		.name = "imx-i2c",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(mxc_i2c_resources ## n),	\
-		.resource = mxc_i2c_resources ## n,			\
-	}
-
-DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
-#endif
-
-static struct resource mxc_pwm_resources[] = {
-	{
-		.start = MX2x_PWM_BASE_ADDR,
-		.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_PWM,
-		.end = MX2x_INT_PWM,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_pwm_device = {
-	.name = "mxc_pwm",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
-	.resource = mxc_pwm_resources,
-};
-
-#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq)			\
-	static struct resource mxc_sdhc_resources ## n[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}, {							\
-			.start = dmareq,				\
-			.end = dmareq,					\
-			.flags = IORESOURCE_DMA,			\
-		},							\
-	};								\
-									\
-	static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32);	\
-									\
-	struct platform_device mxc_sdhc_device ## n = {			\
-		.name = "mxc-mmc",					\
-		.id = n,						\
-		.dev = {						\
-			.dma_mask = &mxc_sdhc ## n ## _dmamask,		\
-			.coherent_dma_mask = DMA_BIT_MASK(32),		\
-		},							\
-		.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n),	\
-		.resource = mxc_sdhc_resources ## n,		\
-	}
-
-DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
-DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
-
-#ifdef CONFIG_MACH_MX27
-static struct resource otg_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR,
-		.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB3,
-		.end = MX27_INT_USB3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-/* OTG gadget device */
-struct platform_device mxc_otg_udc_device = {
-	.name		= "fsl-usb2-udc",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &otg_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= otg_resources,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-};
-
-/* OTG host */
-struct platform_device mxc_otg_host = {
-	.name = "mxc-ehci",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &otg_dmamask,
-	},
-	.resource = otg_resources,
-	.num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* USB host 1 */
-
-static u64 usbh1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh1_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR + 0x200,
-		.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB1,
-		.end = MX27_INT_USB1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh1 = {
-	.name = "mxc-ehci",
-	.id = 1,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &usbh1_dmamask,
-	},
-	.resource = mxc_usbh1_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
-};
-
-/* USB host 2 */
-static u64 usbh2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh2_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR + 0x400,
-		.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB2,
-		.end = MX27_INT_USB2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh2 = {
-	.name = "mxc-ehci",
-	.id = 2,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &usbh2_dmamask,
-	},
-	.resource = mxc_usbh2_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-#endif
-
-#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix)			\
-	{								\
-		.name = _name,						\
-		.start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,	\
-		.end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,		\
-		.flags = IORESOURCE_DMA,				\
-	}
-
-#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq)			\
-	static struct resource imx_ssi_resources ## n[] = {		\
-		{							\
-			.start = MX2x_SSI ## ssin ## _BASE_ADDR,	\
-			.end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f,	\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = MX2x_INT_SSI1,				\
-			.end = MX2x_INT_SSI1,				\
-			.flags = IORESOURCE_IRQ,			\
-		},							\
-		DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0),		\
-		DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0),		\
-		DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1),		\
-		DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1),		\
-	};								\
-									\
-	struct platform_device imx_ssi_device ## n = {			\
-		.name = "imx-ssi",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(imx_ssi_resources ## n),	\
-		.resource = imx_ssi_resources ## n,			\
-	}
-
-DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
-DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
-
-/* GPIO port description */
-#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
-	{								\
-		.chip.label = "gpio-" #n,				\
-		.irq = _irq,						\
-		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
-				n * 0x100),				\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
-	}
-
-#define DEFINE_MXC_GPIO_PORT(SOC, n)					\
-	{								\
-		.chip.label = "gpio-" #n,				\
-		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
-				n * 0x100),				\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
-	}
-
-#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)					\
-	static struct mxc_gpio_port pfx ## _gpio_ports[] = {		\
-		DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),	\
-		DEFINE_MXC_GPIO_PORT(SOC, 1),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 2),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 3),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 4),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 5),				\
-	}
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_GPIO_PORTS(MX21, imx21);
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_GPIO_PORTS(MX27, imx27);
-#endif
-
-int __init mxc_register_gpios(void)
-{
-#ifdef CONFIG_MACH_MX21
-	if (cpu_is_mx21())
-		return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
-	else
-#endif
-#ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27())
-		return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
-	else
-#endif
-		return 0;
-}
-
-#ifdef CONFIG_MACH_MX21
-static struct resource mx21_usbhc_resources[] = {
-	{
-		.start	= MX21_USBOTG_BASE_ADDR,
-		.end	= MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start		= MX21_INT_USBHOST,
-		.end		= MX21_INT_USBHOST,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx21_usbhc_device = {
-	.name		= "imx21-hcd",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(mx21_usbhc_resources),
-	.resource	= mx21_usbhc_resources,
-};
-#endif
-
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
deleted file mode 100644
index 84ed51380174..000000000000
--- a/arch/arm/mach-mx2/devices.h
+++ /dev/null
@@ -1,42 +0,0 @@
-extern struct platform_device mxc_gpt1;
-extern struct platform_device mxc_gpt2;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_gpt3;
-extern struct platform_device mxc_gpt4;
-extern struct platform_device mxc_gpt5;
-#endif
-extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
-extern struct platform_device mxc_uart_device5;
-extern struct platform_device mxc_w1_master_device;
-#ifdef CONFIG_MACH_MX21
-extern struct platform_device imx21_nand_device;
-#endif
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device imx27_nand_device;
-#endif
-extern struct platform_device mxc_fb_device;
-extern struct platform_device mxc_fec_device;
-extern struct platform_device mxc_pwm_device;
-extern struct platform_device mxc_i2c_device0;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_i2c_device1;
-#endif
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-extern struct platform_device mxc_otg_udc_device;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_spi_device2;
-#endif
-extern struct platform_device mx21_usbhc_device;
-extern struct platform_device imx_ssi_device0;
-extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
deleted file mode 100644
index f3b169d5245f..000000000000
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
-#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-
-#include "devices.h"
-
-static int eukrea_mbimx27_pins[] = {
-	/* UART2 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART3 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* UART4 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	/* display */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* SPI1 */
-	PD28_PF_CSPI1_SS0,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 16,
-	},
-	{
-		.name			= "led2",
-		.default_trigger	= "none",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 19,
-	},
-	{
-		.name			= "backlight",
-		.default_trigger	= "backlight",
-		.active_low		= 0,
-		.gpio			= GPIO_PORTE | 5,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
-	{
-		.mode = {
-			.name		= "CMO-QGVA",
-			.refresh	= 60,
-			.xres		= 320,
-			.yres		= 240,
-			.pixclock	= 156000,
-			.hsync_len	= 30,
-			.left_margin	= 38,
-			.right_margin	= 20,
-			.vsync_len	= 3,
-			.upper_margin	= 15,
-			.lower_margin	= 4,
-		},
-		.pcr		= 0xFAD08B80,
-		.bpp		= 16,
-	},
-};
-
-static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
-	.mode = eukrea_mbimx27_modes,
-	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
-
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00040060,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-#define ADS7846_PENDOWN (GPIO_PORTD | 25)
-
-static void ads7846_dev_init(void)
-{
-	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
-		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
-		return;
-	}
-
-	gpio_direction_input(ADS7846_PENDOWN);
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(ADS7846_PENDOWN);
-}
-
-static struct ads7846_platform_data ads7846_config __initdata = {
-	.get_pendown_state	= ads7846_get_pendown_state,
-	.keep_vref_on		= 1,
-};
-
-static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "ads7846",
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 1500000,
-		.irq		= IRQ_GPIOD(25),
-		.platform_data	= &ads7846_config,
-		.mode           = SPI_MODE_2,
-	},
-};
-
-static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
-
-static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
-	.chipselect	= eukrea_mbimx27_spi_cs,
-	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
-};
-#endif
-
-static struct platform_device *platform_devices[] __initdata = {
-	&leds_gpio,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx27 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimx27_baseboard_init(void)
-{
-	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
-		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
-
-	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, NULL);
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	/* SPI and ADS7846 Touchscreen controler init */
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
-	mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
-	spi_register_board_info(eukrea_mbimx27_spi_board_info,
-			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-	ads7846_dev_init();
-#endif
-
-	/* Leds configuration */
-	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
-	/* Backlight */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
diff --git a/arch/arm/mach-mx2/mach-cpuimx27.c b/arch/arm/mach-mx2/mach-cpuimx27.c
deleted file mode 100644
index 1f616dcaabc9..000000000000
--- a/arch/arm/mach-mx2/mach-cpuimx27.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm038.c which is :
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/board-eukrea_cpuimx27.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
-#include <mach/mxc_nand.h>
-
-#include "devices.h"
-
-static int eukrea_cpuimx27_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART4 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* SDHC2 */
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	/* Quad UART's IRQ */
-	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
-#endif
-};
-
-static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
-	.width = 2,
-};
-
-static struct resource eukrea_cpuimx27_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc3ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &eukrea_cpuimx27_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &eukrea_cpuimx27_flash_resource,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_cpuimx27_nor_mtd_device,
-	&mxc_fec_device,
-};
-
-static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
-		.irq = IRQ_GPIOB(23),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
-		.irq = IRQ_GPIOB(22),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
-		.irq = IRQ_GPIOB(27),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
-		.irq = IRQ_GPIOB(30),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-#endif
-
-static void __init eukrea_cpuimx27_init(void)
-{
-	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
-		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-
-	mxc_register_device(&imx27_nand_device,
-			&eukrea_cpuimx27_nand_board_info);
-
-	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
-
-	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-	/* SDHC2 can be used for Wifi */
-	mxc_register_device(&mxc_sdhc_device1, NULL);
-	/* in which case UART4 is also used for Bluetooth */
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
-#endif
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	platform_device_register(&serial_device);
-#endif
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
-	eukrea_mbimx27_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx27_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer eukrea_cpuimx27_timer = {
-	.init = eukrea_cpuimx27_timer_init,
-};
-
-MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = eukrea_cpuimx27_init,
-	.timer          = &eukrea_cpuimx27_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-imx27lite.c b/arch/arm/mach-mx2/mach-imx27lite.c
deleted file mode 100644
index b5710bf18b96..000000000000
--- a/arch/arm/mach-mx2/mach-imx27lite.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx27.h>
-#include <mach/board-mx27lite.h>
-
-#include "devices.h"
-
-static unsigned int mx27lite_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
-static void __init mx27lite_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
-		"imx27lite");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27lite_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mx27lite_timer = {
-	.init	= mx27lite_timer_init,
-};
-
-MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = mx27lite_init,
-	.timer          = &mx27lite_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-mx27_3ds.c b/arch/arm/mach-mx2/mach-mx27_3ds.c
deleted file mode 100644
index b2f4e0db3fb3..000000000000
--- a/arch/arm/mach-mx2/mach-mx27_3ds.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx27.h>
-#include <mach/board-mx27pdk.h>
-
-#include "devices.h"
-
-static unsigned int mx27pdk_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
-static void __init mx27pdk_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
-		"mx27pdk");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27pdk_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mx27pdk_timer = {
-	.init	= mx27pdk_timer_init,
-};
-
-MACHINE_START(MX27_3DS, "Freescale MX27PDK")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = mx27pdk_init,
-	.timer          = &mx27pdk_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
deleted file mode 100644
index 1c0c835b2252..000000000000
--- a/arch/arm/mach-mx2/serial.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include "devices.h"
-
-static struct resource uart0[] = {
-	{
-		.start = MX2x_UART1_BASE_ADDR,
-		.end = MX2x_UART1_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART1,
-		.end = MX2x_INT_UART1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = MX2x_UART2_BASE_ADDR,
-		.end = MX2x_UART2_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART2,
-		.end = MX2x_INT_UART2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = MX2x_UART3_BASE_ADDR,
-		.end = MX2x_UART3_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART3,
-		.end = MX2x_INT_UART3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource uart3[] = {
-	{
-		.start = MX2x_UART4_BASE_ADDR,
-		.end = MX2x_UART4_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART4,
-		.end = MX2x_INT_UART4,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device3 = {
-	.name = "imx-uart",
-	.id = 3,
-	.resource = uart3,
-	.num_resources = ARRAY_SIZE(uart3),
-};
-
-#ifdef CONFIG_MACH_MX27
-static struct resource uart4[] = {
-	{
-		.start = MX27_UART5_BASE_ADDR,
-		.end = MX27_UART5_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_UART5,
-		.end = MX27_INT_UART5,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device4 = {
-	.name = "imx-uart",
-	.id = 4,
-	.resource = uart4,
-	.num_resources = ARRAY_SIZE(uart4),
-};
-
-static struct resource uart5[] = {
-	{
-		.start = MX27_UART6_BASE_ADDR,
-		.end = MX27_UART6_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_UART6,
-		.end = MX27_INT_UART6,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device5 = {
-	.name = "imx-uart",
-	.id = 5,
-	.resource = uart5,
-	.num_resources = ARRAY_SIZE(uart5),
-};
-#endif
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index 54d217314ee9..38ca09a5df9d 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -4,5 +4,31 @@ comment "MX25 platforms:"
 
 config MACH_MX25_3DS
 	bool "Support MX25PDK (3DS) Platform"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_ESDHC
+
+config MACH_EUKREA_CPUIMX25
+	bool "Support Eukrea CPUIMX25 Platform"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_ESDHC
+	select MXC_ULPI if USB_ULPI
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX25
+	default MACH_EUKREA_MBIMXSD25_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD25_BASEBOARD
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
 
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index 10cebc5ced8c..d9e46ce00a4e 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,3 +1,5 @@
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
-obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25)		+= mach-cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 155014993b13..9e4a5578c2fb 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -72,7 +72,7 @@ unsigned long get_rate_arm(struct clk *clk)
 	unsigned long rate = get_rate_mpll();
 
 	if (cctl & (1 << 14))
-		rate = (rate * 3) >> 1;
+		rate = (rate * 3) >> 2;
 
 	return rate / ((cctl >> 30) + 1);
 }
@@ -99,7 +99,7 @@ static unsigned long get_rate_per(int per)
 	if (readl(CRM_BASE + 0x64) & (1 << per))
 		fref = get_rate_upll();
 	else
-		fref = get_rate_ipg(NULL);
+		fref = get_rate_ahb(NULL);
 
 	return fref / (val + 1);
 }
@@ -109,6 +109,16 @@ static unsigned long get_rate_uart(struct clk *clk)
 	return get_rate_per(15);
 }
 
+static unsigned long get_rate_ssi2(struct clk *clk)
+{
+	return get_rate_per(14);
+}
+
+static unsigned long get_rate_ssi1(struct clk *clk)
+{
+	return get_rate_per(13);
+}
+
 static unsigned long get_rate_i2c(struct clk *clk)
 {
 	return get_rate_per(6);
@@ -129,9 +139,27 @@ static unsigned long get_rate_lcdc(struct clk *clk)
 	return get_rate_per(7);
 }
 
+static unsigned long get_rate_esdhc1(struct clk *clk)
+{
+	return get_rate_per(3);
+}
+
+static unsigned long get_rate_esdhc2(struct clk *clk)
+{
+	return get_rate_per(4);
+}
+
+static unsigned long get_rate_csi(struct clk *clk)
+{
+	return get_rate_per(0);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
-	return 48000000; /* FIXME */
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+	unsigned long rate = get_rate_upll();
+
+	return (cctl & (1 << 23)) ? 0 : rate / ((0x3F & (cctl >> 16)) + 1);
 }
 
 static int clk_cgcr_enable(struct clk *clk)
@@ -166,14 +194,46 @@ static void clk_cgcr_disable(struct clk *clk)
 		.secondary	= s,			\
 	}
 
+/*
+ * Note: the following IPG clock gating bits are wrongly marked "Reserved" in
+ * the i.MX25 Reference Manual Rev 1, table 15-13. The information below is
+ * taken from the Freescale released BSP.
+ *
+ * bit	reg	offset	clock
+ *
+ * 0	CGCR1	0	AUDMUX
+ * 12	CGCR1	12	ESAI
+ * 16	CGCR1	16	GPIO1
+ * 17	CGCR1	17	GPIO2
+ * 18	CGCR1	18	GPIO3
+ * 23	CGCR1	23	I2C1
+ * 24	CGCR1	24	I2C2
+ * 25	CGCR1	25	I2C3
+ * 27	CGCR1	27	IOMUXC
+ * 28	CGCR1	28	KPP
+ * 30	CGCR1	30	OWIRE
+ * 36	CGCR2	4	RTIC
+ * 51	CGCR2	19	WDOG
+ */
+
 DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
 DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1,	 NULL, NULL);
+DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0,  3, get_rate_esdhc1,	 NULL,
+		&esdhc1_ahb_clk);
+DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2,	 NULL, NULL);
+DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0,  4, get_rate_esdhc2,	 NULL,
+		&esdhc2_ahb_clk);
 DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
 DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
 DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
+DEFINE_CLOCK(csi_ahb_clk, 0, CCM_CGCR0, 18, get_rate_csi, NULL, NULL);
+DEFINE_CLOCK(csi_per_clk, 0, CCM_CGCR0, 0, get_rate_csi, NULL, &csi_ahb_clk);
 DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
@@ -191,6 +251,17 @@ DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
 DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
 DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1,  8, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(lcdc_clk,	 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
+DEFINE_CLOCK(wdt_clk,    0, CCM_CGCR2, 19, get_rate_ipg, NULL,  NULL);
+DEFINE_CLOCK(ssi1_clk,  0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
+DEFINE_CLOCK(ssi2_clk,  1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
+DEFINE_CLOCK(esdhc1_clk,  0, CCM_CGCR1, 13, get_rate_esdhc1, NULL,
+		&esdhc1_per_clk);
+DEFINE_CLOCK(esdhc2_clk,  1, CCM_CGCR1, 14, get_rate_esdhc2, NULL,
+		&esdhc2_per_clk);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
+DEFINE_CLOCK(csi_clk,    0, CCM_CGCR1,  4, get_rate_csi, NULL,  &csi_per_clk);
+DEFINE_CLOCK(can1_clk,	 0, CCM_CGCR1,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(can2_clk,	 1, CCM_CGCR1,  3, get_rate_ipg, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -210,14 +281,14 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
 	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
 	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
 	_REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
-	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
 	_REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
@@ -225,6 +296,15 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
+	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
+	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
 };
 
 int __init mx25_clocks_init(void)
@@ -238,9 +318,13 @@ int __init mx25_clocks_init(void)
 	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
 	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
 	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+	clk_enable(&uart1_clk);
+#endif
 
-	/* Clock source for lcdc is upll */
-	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64);
+	/* Clock source for lcdc and csi is upll */
+	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
+			CRM_BASE + 0x64);
 
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h
new file mode 100644
index 000000000000..93afa10b13cf
--- /dev/null
+++ b/arch/arm/mach-mx25/devices-imx25.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx25.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fec_data imx25_fec_data __initconst;
+#define imx25_add_fec(pdata)	\
+	imx_add_fec(&imx25_fec_data, pdata)
+
+#define imx25_add_flexcan0(pdata)	\
+	imx_add_flexcan(0, MX25_CAN1_BASE_ADDR, SZ_16K, MX25_INT_CAN1, pdata)
+#define imx25_add_flexcan1(pdata)	\
+	imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata)
+
+extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
+#define imx25_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
+#define imx25_add_imx_i2c0(pdata)	imx25_add_imx_i2c(0, pdata)
+#define imx25_add_imx_i2c1(pdata)	imx25_add_imx_i2c(1, pdata)
+#define imx25_add_imx_i2c2(pdata)	imx25_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
+#define imx25_add_imx_ssi(id, pdata)	\
+	imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
+#define imx25_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
+#define imx25_add_imx_uart0(pdata)	imx25_add_imx_uart(0, pdata)
+#define imx25_add_imx_uart1(pdata)	imx25_add_imx_uart(1, pdata)
+#define imx25_add_imx_uart2(pdata)	imx25_add_imx_uart(2, pdata)
+#define imx25_add_imx_uart3(pdata)	imx25_add_imx_uart(3, pdata)
+#define imx25_add_imx_uart4(pdata)	imx25_add_imx_uart(4, pdata)
+
+extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
+#define imx25_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
+#define imx25_add_spi_imx(id, pdata)	\
+	imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+#define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
+#define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
+#define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
+
+extern const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst;
+#define imx25_add_esdhc(id, pdata)	\
+	imx_add_esdhc(&imx25_esdhc_data[id], pdata)
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 3a405fa400eb..1d0eb3e85941 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -22,103 +22,6 @@
 #include <mach/mx25.h>
 #include <mach/irqs.h>
 
-static struct resource uart0[] = {
-	{
-		.start = 0x43f90000,
-		.end = 0x43f93fff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 45,
-		.end = 45,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = 0x43f94000,
-		.end = 0x43f97fff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 32,
-		.end = 32,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = 0x5000c000,
-		.end = 0x5000ffff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 18,
-		.end = 18,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource uart3[] = {
-	{
-		.start = 0x50008000,
-		.end = 0x5000bfff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 5,
-		.end = 5,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device3 = {
-	.name = "imx-uart",
-	.id = 3,
-	.resource = uart3,
-	.num_resources = ARRAY_SIZE(uart3),
-};
-
-static struct resource uart4[] = {
-	{
-		.start = 0x5002c000,
-		.end = 0x5002ffff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 40,
-		.end = 40,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device4 = {
-	.name = "imx-uart",
-	.id = 4,
-	.resource = uart4,
-	.num_resources = ARRAY_SIZE(uart4),
-};
-
-#define MX25_OTG_BASE_ADDR 0x53FF4000
-
 static u64 otg_dmamask = DMA_BIT_MASK(32);
 
 static struct resource mxc_otg_resources[] = {
@@ -181,63 +84,6 @@ struct platform_device mxc_usbh2 = {
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
-static struct resource mxc_spi_resources0[] = {
-	{
-	       .start = 0x43fa4000,
-	       .end = 0x43fa7fff,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = 14,
-	       .end = 14,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
-	.resource = mxc_spi_resources0,
-};
-
-static struct resource mxc_spi_resources1[] = {
-	{
-	       .start = 0x50010000,
-	       .end = 0x50013fff,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = 13,
-	       .end = 13,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
-	.resource = mxc_spi_resources1,
-};
-
-static struct resource mxc_spi_resources2[] = {
-	{
-	       .start = 0x50004000,
-	       .end = 0x50007fff,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = 0,
-	       .end = 0,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device2 = {
-	.name = "spi_imx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
-	.resource = mxc_spi_resources2,
-};
-
 static struct resource mxc_pwm_resources0[] = {
 	{
 		.start	= 0x53fe0000,
@@ -333,63 +179,6 @@ struct platform_device mxc_pwm_device3 = {
 	.resource = mxc_pwm_resources3,
 };
 
-static struct resource mxc_i2c_1_resources[] = {
-	{
-		.start	= 0x43f80000,
-		.end	= 0x43f83fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 3,
-		.end	= 3,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device0 = {
-	.name = "imx-i2c",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources,
-};
-
-static struct resource mxc_i2c_2_resources[] = {
-	{
-		.start	= 0x43f98000,
-		.end	= 0x43f9bfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 4,
-		.end	= 4,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device1 = {
-	.name = "imx-i2c",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources,
-};
-
-static struct resource mxc_i2c_3_resources[] = {
-	{
-		.start	= 0x43f84000,
-		.end	= 0x43f87fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= 10,
-		.end	= 10,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_i2c_device2 = {
-	.name = "imx-i2c",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
-	.resource = mxc_i2c_3_resources,
-};
-
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
 		.chip.label = "gpio-0",
@@ -414,51 +203,11 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
 	}
 };
 
-int __init mxc_register_gpios(void)
+int __init imx25_register_gpios(void)
 {
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
 
-static struct resource mx25_fec_resources[] = {
-	{
-		.start	= MX25_FEC_BASE_ADDR,
-		.end	= MX25_FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MX25_INT_FEC,
-		.end	= MX25_INT_FEC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx25_fec_device = {
-	.name	= "fec",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
-	.resource	= mx25_fec_resources,
-};
-
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= MX25_NFC_BASE_ADDR,
-		.end	= MX25_NFC_BASE_ADDR + 0x1fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MX25_INT_NANDFC,
-		.end	= MX25_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_nand_device = {
-	.name		= "mxc_nand",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mxc_nand_resources),
-	.resource	= mxc_nand_resources,
-};
-
 static struct resource mx25_rtc_resources[] = {
 	{
 		.start	= MX25_DRYICE_BASE_ADDR,
@@ -515,3 +264,45 @@ struct platform_device mxc_wdt = {
 	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
 	.resource = mxc_wdt_resources,
 };
+
+static struct resource mx25_kpp_resources[] = {
+	{
+		.start	= MX25_KPP_BASE_ADDR,
+		.end	= MX25_KPP_BASE_ADDR + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_KPP,
+		.end	= MX25_INT_KPP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_kpp_device = {
+	.name	= "imx-keypad",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(mx25_kpp_resources),
+	.resource	= mx25_kpp_resources,
+};
+
+static struct resource mx25_csi_resources[] = {
+	{
+		.start	= MX25_CSI_BASE_ADDR,
+		.end	= MX25_CSI_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_CSI,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mx25_csi_device = {
+	.name	= "mx2-camera",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_csi_resources),
+	.resource	= mx25_csi_resources,
+	.dev		= {
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index cee12c0a0be6..7b70a43c3a4b 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -1,24 +1,13 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_otg;
 extern struct platform_device otg_udc_device;
 extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-extern struct platform_device mxc_spi_device2;
 extern struct platform_device mxc_pwm_device0;
 extern struct platform_device mxc_pwm_device1;
 extern struct platform_device mxc_pwm_device2;
 extern struct platform_device mxc_pwm_device3;
 extern struct platform_device mxc_keypad_device;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
-extern struct platform_device mxc_i2c_device2;
-extern struct platform_device mx25_fec_device;
-extern struct platform_device mxc_nand_device;
 extern struct platform_device mx25_rtc_device;
 extern struct platform_device mx25_fb_device;
 extern struct platform_device mxc_wdt;
+extern struct platform_device mx25_kpp_device;
+extern struct platform_device mx25_csi_device;
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
new file mode 100644
index 000000000000..e765ac5d9a08
--- /dev/null
+++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
@@ -0,0 +1,298 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <video/platform_lcd.h>
+
+#include <mach/hardware.h>
+#include <mach/iomux-mx25.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/mx25.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/audmux.h>
+
+#include "devices-imx25.h"
+#include "devices.h"
+
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
+	/* LCD_PWR */
+	MX25_PAD_PWM__GPIO_1_26,
+	/* LED */
+	MX25_PAD_POWER_FAIL__GPIO_3_19,
+	/* SWITCH */
+	MX25_PAD_VSTBY_ACK__GPIO_3_18,
+	/* UART2 */
+	MX25_PAD_UART2_RTS__UART2_RTS,
+	MX25_PAD_UART2_CTS__UART2_CTS,
+	MX25_PAD_UART2_TXD__UART2_TXD,
+	MX25_PAD_UART2_RXD__UART2_RXD,
+	/* SD1 */
+	MX25_PAD_SD1_CMD__SD1_CMD,
+	MX25_PAD_SD1_CLK__SD1_CLK,
+	MX25_PAD_SD1_DATA0__SD1_DATA0,
+	MX25_PAD_SD1_DATA1__SD1_DATA1,
+	MX25_PAD_SD1_DATA2__SD1_DATA2,
+	MX25_PAD_SD1_DATA3__SD1_DATA3,
+	/* SD1 CD */
+	MX25_PAD_DE_B__GPIO_2_20,
+	/* I2S */
+	MX25_PAD_KPP_COL3__AUD5_TXFS,
+	MX25_PAD_KPP_COL2__AUD5_TXC,
+	MX25_PAD_KPP_COL1__AUD5_RXD,
+	MX25_PAD_KPP_COL0__AUD5_TXD,
+	/* CAN */
+	MX25_PAD_GPIO_D__CAN2_RX,
+	MX25_PAD_GPIO_C__CAN2_TX,
+};
+
+#define GPIO_LED1	83
+#define GPIO_SWITCH1	82
+#define GPIO_SD1CD	52
+#define GPIO_LCDPWR	26
+
+static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
+	{
+		.mode	= {
+			.name		= "CMO-QVGA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= KHZ2PICOS(6500),
+			.left_margin	= 30,
+			.right_margin	= 38,
+			.upper_margin	= 20,
+			.lower_margin	= 3,
+			.hsync_len	= 15,
+			.vsync_len	= 4,
+		},
+		.bpp	= 16,
+		.pcr	= 0xCAD08B80,
+	}, {
+		.mode = {
+			.name		= "DVI-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 32000,
+			.hsync_len	= 7,
+			.left_margin	= 100,
+			.right_margin	= 100,
+			.vsync_len	= 7,
+			.upper_margin	= 7,
+			.lower_margin	= 100,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "DVI-SVGA",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 600,
+			.pixclock	= 25000,
+			.hsync_len	= 7,
+			.left_margin	= 75,
+			.right_margin	= 75,
+			.vsync_len	= 7,
+			.upper_margin	= 7,
+			.lower_margin	= 75,
+		},
+		.pcr		= 0xFA208B80,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mximxsd_fb_pdata = {
+	.mode		= eukrea_mximxsd_modes,
+	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDPWR, 1);
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
+};
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &eukrea_mbimxsd_led_info,
+	},
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device eukrea_mbimxsd_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &eukrea_mbimxsd_button_data,
+	}
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_leds_gpio,
+	&eukrea_mbimxsd_button_device,
+	&eukrea_mbimxsd_lcd_powerdev,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx25 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd25_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
+	/* SSI unit master I2S codec connected to SSI_AUD5*/
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN |
+			MXC_AUDMUX_V2_PTCR_TFSDIR |
+			MXC_AUDMUX_V2_PTCR_TFSEL(4) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR |
+			MXC_AUDMUX_V2_PTCR_TCSEL(4),
+			MXC_AUDMUX_V2_PDCR_RXDSEL(4)
+	);
+	mxc_audmux_v2_configure_port(4,
+			MXC_AUDMUX_V2_PTCR_SYN,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
+	);
+#endif
+
+	imx25_add_imx_uart1(&uart_pdata);
+	mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
+	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
+	imx25_add_flexcan1(NULL);
+	imx25_add_esdhc(0, NULL);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	gpio_request(GPIO_LCDPWR, "LCDPWR");
+	gpio_direction_output(GPIO_LCDPWR, 1);
+	gpio_free(GPIO_SWITCH1);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
new file mode 100644
index 000000000000..f6f9ad60c25e
--- /dev/null
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
+#include <mach/mxc_ehci.h>
+#include <mach/iomux-mx25.h>
+
+#include "devices-imx25.h"
+#include "devices.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct pad_desc eukrea_cpuimx25_pads[] = {
+	/* FEC - RMII */
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	/* I2C1 */
+	MX25_PAD_I2C1_CLK__I2C1_CLK,
+	MX25_PAD_I2C1_DAT__I2C1_DAT,
+};
+
+static const struct fec_platform_data mx25_fec_pdata __initconst = {
+	.phy	= PHY_INTERFACE_MODE_RMII,
+};
+
+static const struct mxc_nand_platform_data
+eukrea_cpuimx25_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static const struct imxi2c_platform_data
+eukrea_cpuimx25_i2c0_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+		  MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx25_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
+
+static void __init eukrea_cpuimx25_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
+			ARRAY_SIZE(eukrea_cpuimx25_pads)))
+		printk(KERN_ERR "error setting cpuimx25 pads !\n");
+
+	imx25_add_imx_uart0(&uart_pdata);
+	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
+	mxc_register_device(&mx25_rtc_device, NULL);
+	imx25_add_fec(&mx25_fec_pdata);
+
+	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
+	imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
+
+	if (otg_mode_host)
+		mxc_register_device(&mxc_otg, &otg_pdata);
+	else
+		mxc_register_device(&otg_udc_device, &otg_device_pdata);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
+	eukrea_mbimxsd25_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx25_timer_init(void)
+{
+	mx25_clocks_init();
+}
+
+static struct sys_timer eukrea_cpuimx25_timer = {
+	.init   = eukrea_cpuimx25_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
+	/* Maintainer: Eukrea Electromatique */
+	.boot_params    = MX25_PHYS_OFFSET + 0x100,
+	.map_io         = mx25_map_io,
+	.init_irq       = mx25_init_irq,
+	.init_machine   = eukrea_cpuimx25_init,
+	.timer          = &eukrea_cpuimx25_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx25/mach-mx25_3ds.c b/arch/arm/mach-mx25/mach-mx25_3ds.c
new file mode 100644
index 000000000000..f8be1eb0c062
--- /dev/null
+++ b/arch/arm/mach-mx25/mach-mx25_3ds.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+/*
+ * This machine is known as:
+ *  - i.MX25 3-Stack Development System
+ *  - i.MX25 Platform Development Kit (i.MX25 PDK)
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+#include <mach/imxfb.h>
+#include <mach/iomux-mx25.h>
+
+#include "devices-imx25.h"
+#include "devices.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct pad_desc mx25pdk_pads[] = {
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
+
+	/* Keypad */
+	MX25_PAD_KPP_ROW0__KPP_ROW0,
+	MX25_PAD_KPP_ROW1__KPP_ROW1,
+	MX25_PAD_KPP_ROW2__KPP_ROW2,
+	MX25_PAD_KPP_ROW3__KPP_ROW3,
+	MX25_PAD_KPP_COL0__KPP_COL0,
+	MX25_PAD_KPP_COL1__KPP_COL1,
+	MX25_PAD_KPP_COL2__KPP_COL2,
+	MX25_PAD_KPP_COL3__KPP_COL3,
+
+	/* SD1 */
+	MX25_PAD_SD1_CMD__SD1_CMD,
+	MX25_PAD_SD1_CLK__SD1_CLK,
+	MX25_PAD_SD1_DATA0__SD1_DATA0,
+	MX25_PAD_SD1_DATA1__SD1_DATA1,
+	MX25_PAD_SD1_DATA2__SD1_DATA2,
+	MX25_PAD_SD1_DATA3__SD1_DATA3,
+};
+
+static const struct fec_platform_data mx25_fec_pdata __initconst = {
+        .phy    = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO		35
+#define FEC_RESET_B_GPIO	104
+
+static void __init mx25pdk_fec_reset(void)
+{
+	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
+	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+	udelay(2);
+
+	/* turn on PHY power and lift reset */
+	gpio_set_value(FEC_ENABLE_GPIO, 1);
+	gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
+static const struct mxc_nand_platform_data
+mx25pdk_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static struct imx_fb_videomode mx25pdk_modes[] = {
+	{
+		.mode	= {
+			.name		= "CRT-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39683,
+			.left_margin	= 45,
+			.right_margin	= 114,
+			.upper_margin	= 33,
+			.lower_margin	= 11,
+			.hsync_len	= 1,
+			.vsync_len	= 1,
+		},
+		.bpp	= 16,
+		.pcr	= 0xFA208B80,
+	},
+};
+
+static struct imx_fb_platform_data mx25pdk_fb_pdata = {
+	.mode		= mx25pdk_modes,
+	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+static const uint32_t mx25pdk_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(0, 2, KEY_VOLUMEDOWN),
+	KEY(0, 3, KEY_HOME),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_ENTER),
+	KEY(1, 3, KEY_VOLUMEUP),
+	KEY(2, 0, KEY_F6),
+	KEY(2, 1, KEY_F8),
+	KEY(2, 2, KEY_F9),
+	KEY(2, 3, KEY_F10),
+	KEY(3, 0, KEY_F1),
+	KEY(3, 1, KEY_F2),
+	KEY(3, 2, KEY_F3),
+	KEY(3, 3, KEY_POWER),
+};
+
+static struct matrix_keymap_data mx25pdk_keymap_data = {
+	.keymap		= mx25pdk_keymap,
+	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
+};
+
+static void __init mx25pdk_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+			ARRAY_SIZE(mx25pdk_pads));
+
+	imx25_add_imx_uart0(&uart_pdata);
+	mxc_register_device(&mxc_usbh2, NULL);
+	imx25_add_mxc_nand(&mx25pdk_nand_board_info);
+	mxc_register_device(&mx25_rtc_device, NULL);
+	mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
+	mxc_register_device(&mxc_wdt, NULL);
+
+	mx25pdk_fec_reset();
+	imx25_add_fec(&mx25_fec_pdata);
+	mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data);
+
+	imx25_add_esdhc(0, NULL);
+}
+
+static void __init mx25pdk_timer_init(void)
+{
+	mx25_clocks_init();
+}
+
+static struct sys_timer mx25pdk_timer = {
+	.init   = mx25pdk_timer_init,
+};
+
+MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.boot_params    = MX25_PHYS_OFFSET + 0x100,
+	.map_io         = mx25_map_io,
+	.init_irq       = mx25_init_irq,
+	.init_machine   = mx25pdk_init,
+	.timer          = &mx25pdk_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx25/mach-mx25pdk.c b/arch/arm/mach-mx25/mach-mx25pdk.c
deleted file mode 100644
index 83d74109e7d8..000000000000
--- a/arch/arm/mach-mx25/mach-mx25pdk.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/fec.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/mx25.h>
-#include <mach/mxc_nand.h>
-#include <mach/imxfb.h>
-#include "devices.h"
-#include <mach/iomux-mx25.h>
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct pad_desc mx25pdk_pads[] = {
-	MX25_PAD_FEC_MDC__FEC_MDC,
-	MX25_PAD_FEC_MDIO__FEC_MDIO,
-	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
-	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
-	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
-	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
-	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
-	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
-
-	/* LCD */
-	MX25_PAD_LD0__LD0,
-	MX25_PAD_LD1__LD1,
-	MX25_PAD_LD2__LD2,
-	MX25_PAD_LD3__LD3,
-	MX25_PAD_LD4__LD4,
-	MX25_PAD_LD5__LD5,
-	MX25_PAD_LD6__LD6,
-	MX25_PAD_LD7__LD7,
-	MX25_PAD_LD8__LD8,
-	MX25_PAD_LD9__LD9,
-	MX25_PAD_LD10__LD10,
-	MX25_PAD_LD11__LD11,
-	MX25_PAD_LD12__LD12,
-	MX25_PAD_LD13__LD13,
-	MX25_PAD_LD14__LD14,
-	MX25_PAD_LD15__LD15,
-	MX25_PAD_GPIO_E__LD16,
-	MX25_PAD_GPIO_F__LD17,
-	MX25_PAD_HSYNC__HSYNC,
-	MX25_PAD_VSYNC__VSYNC,
-	MX25_PAD_LSCLK__LSCLK,
-	MX25_PAD_OE_ACD__OE_ACD,
-	MX25_PAD_CONTRAST__CONTRAST,
-};
-
-static struct fec_platform_data mx25_fec_pdata = {
-        .phy    = PHY_INTERFACE_MODE_RMII,
-};
-
-#define FEC_ENABLE_GPIO		35
-#define FEC_RESET_B_GPIO	104
-
-static void __init mx25pdk_fec_reset(void)
-{
-	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
-	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
-
-	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
-	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
-	udelay(2);
-
-	/* turn on PHY power and lift reset */
-	gpio_set_value(FEC_ENABLE_GPIO, 1);
-	gpio_set_value(FEC_RESET_B_GPIO, 1);
-}
-
-static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static struct imx_fb_videomode mx25pdk_modes[] = {
-	{
-		.mode	= {
-			.name		= "CRT-VGA",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 39683,
-			.left_margin	= 45,
-			.right_margin	= 114,
-			.upper_margin	= 33,
-			.lower_margin	= 11,
-			.hsync_len	= 1,
-			.vsync_len	= 1,
-		},
-		.bpp	= 16,
-		.pcr	= 0xFA208B80,
-	},
-};
-
-static struct imx_fb_platform_data mx25pdk_fb_pdata = {
-	.mode		= mx25pdk_modes,
-	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static void __init mx25pdk_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
-			ARRAY_SIZE(mx25pdk_pads));
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_usbh2, NULL);
-	mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
-	mxc_register_device(&mx25_rtc_device, NULL);
-	mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
-
-	mx25pdk_fec_reset();
-	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
-}
-
-static void __init mx25pdk_timer_init(void)
-{
-	mx25_clocks_init();
-}
-
-static struct sys_timer mx25pdk_timer = {
-	.init   = mx25pdk_timer_init,
-};
-
-MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= MX25_AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX25_PHYS_OFFSET + 0x100,
-	.map_io         = mx25_map_io,
-	.init_irq       = mx25_init_irq,
-	.init_machine   = mx25pdk_init,
-	.timer          = &mx25pdk_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
index a7e587ff3e9e..bb677111fb0f 100644
--- a/arch/arm/mach-mx25/mm.c
+++ b/arch/arm/mach-mx25/mm.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/mm.h>
@@ -69,8 +65,11 @@ void __init mx25_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+int imx25_register_gpios(void);
+
 void __init mx25_init_irq(void)
 {
 	mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+	imx25_register_gpios();
 }
 
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 344753fdf25e..5000ac1f93e3 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -9,12 +9,16 @@ config ARCH_MX35
 	bool
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
+	select HAVE_EPIT
 
 comment "MX3 platforms:"
 
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
 	default y
 	help
 	  Include support for MX31ADS platform. This includes specific
@@ -34,6 +38,9 @@ config MACH_MX31ADS_WM1133_EV1
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm037 platform. This includes
@@ -42,6 +49,7 @@ config MACH_PCM037
 config MACH_PCM037_EET
 	bool "Support pcm037 EET board extensions"
 	depends on MACH_PCM037
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Add support for PCM037 EET baseboard extensions. If you are using the
 	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
@@ -51,6 +59,9 @@ config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
 	select MXC_ULPI if USB_ULPI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -58,6 +69,10 @@ config MACH_MX31LITE
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
 	select ARCH_MX31
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -74,6 +89,9 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
@@ -82,6 +100,8 @@ config MACH_MX31MOBOARD
 config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31 based LILLY1131 modules. This includes
@@ -90,6 +110,7 @@ config MACH_MX31LILLY
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -97,6 +118,12 @@ config MACH_QONG
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
 	select ARCH_MX35
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_ESDHC
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm043 platform. This includes
@@ -105,6 +132,9 @@ config MACH_PCM043
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
@@ -113,6 +143,10 @@ config MACH_ARMADILLO5X0
 config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
 	select ARCH_MX35
+	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_ESDHC
 	default n
 	help
 	  Include support for MX35PDK platform. This includes specific
@@ -121,8 +155,36 @@ config MACH_MX35_3DS
 config MACH_KZM_ARM11_01
 	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 	select ARCH_MX31
+	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for KZM-ARM11-01. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_EUKREA_CPUIMX35
+	bool "Support Eukrea CPUIMX35 Platform"
+	select ARCH_MX35
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_ESDHC
+	select MXC_ULPI if USB_ULPI
+	help
+	  Include support for Eukrea CPUIMX35 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX35
+	default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 5d650fda5d5d..8a182d0a3fcf 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -7,7 +7,6 @@
 obj-y				:= mm.o devices.o cpu.o
 CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
 CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
-CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-$(CONFIG_ARCH_MX31)		+= clock-imx31.o iomux-imx31.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
@@ -22,5 +21,7 @@ obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
 obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
 obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35pdk.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35_3ds.o
 obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX35)	+= mach-cpuimx35.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c
index 9a9eb6de6127..109e98f323e0 100644
--- a/arch/arm/mach-mx3/clock-imx31.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -477,7 +477,7 @@ DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(ata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk);
+DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(uart1_clk,   0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
@@ -525,9 +525,9 @@ DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
 
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
 	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
@@ -564,7 +564,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
 	_REGISTER_CLOCK(NULL, "rng", rng_clk)
-	_REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1)
+	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1)
 	_REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
 	_REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
 	_REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 9f3e943e2232..61e4a318980a 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -155,7 +155,7 @@ static unsigned long get_rate_arm(void)
 
 	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 	if (aad->sel)
-		fref = fref * 2 / 3;
+		fref = fref * 3 / 4;
 
 	return fref / aad->arm;
 }
@@ -164,7 +164,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	struct arm_ahb_div *aad;
-	unsigned long fref = get_rate_mpll();
+	unsigned long fref = get_rate_arm();
 
 	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 
@@ -176,16 +176,11 @@ static unsigned long get_rate_ipg(struct clk *clk)
 	return get_rate_ahb(NULL) >> 1;
 }
 
-static unsigned long get_3_3_div(unsigned long in)
-{
-	return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
-}
-
 static unsigned long get_rate_uart(struct clk *clk)
 {
 	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
 	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div = get_3_3_div(pdr4 >> 10);
+	unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
 
 	if (pdr3 & (1 << 14))
 		return get_rate_arm() / div;
@@ -216,7 +211,7 @@ static unsigned long get_rate_sdhc(struct clk *clk)
 		break;
 	}
 
-	return rate / get_3_3_div(div);
+	return rate / (div + 1);
 }
 
 static unsigned long get_rate_mshc(struct clk *clk)
@@ -270,7 +265,7 @@ static unsigned long get_rate_csi(struct clk *clk)
 	else
 		rate = get_rate_ppll();
 
-	return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
+	return rate / (((pdr2 >> 16) & 0x3f) + 1);
 }
 
 static unsigned long get_rate_otg(struct clk *clk)
@@ -283,25 +278,51 @@ static unsigned long get_rate_otg(struct clk *clk)
 	else
 		rate = get_rate_ppll();
 
-	return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+	return rate / (((pdr4 >> 22) & 0x3f) + 1);
 }
 
 static unsigned long get_rate_ipg_per(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div1, div2;
+	unsigned long div;
 
 	if (pdr0 & (1 << 26)) {
-		div1 = (pdr4 >> 19) & 0x7;
-		div2 = (pdr4 >> 16) & 0x7;
-		return get_rate_arm() / ((div1 + 1) * (div2 + 1));
+		div = (pdr4 >> 16) & 0x3f;
+		return get_rate_arm() / (div + 1);
 	} else {
-		div1 = (pdr0 >> 12) & 0x7;
-		return get_rate_ahb(NULL) / div1;
+		div = (pdr0 >> 12) & 0x7;
+		return get_rate_ahb(NULL) / (div + 1);
 	}
 }
 
+static unsigned long get_rate_hsp(struct clk *clk)
+{
+	unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03;
+	unsigned long fref = get_rate_mpll();
+
+	if (fref > 400 * 1000 * 1000) {
+		switch (hsp_podf) {
+		case 0:
+			return fref >> 2;
+		case 1:
+			return fref >> 3;
+		case 2:
+			return fref / 3;
+		}
+	} else {
+		switch (hsp_podf) {
+		case 0:
+		case 2:
+			return fref / 3;
+		case 1:
+			return fref / 6;
+		}
+	}
+
+	return 0;
+}
+
 static int clk_cgr_enable(struct clk *clk)
 {
 	u32 reg;
@@ -343,8 +364,8 @@ DEFINE_CLOCK(cspi2_clk,  1, CCM_CGR0, 12, get_rate_ipg, NULL);
 DEFINE_CLOCK(ect_clk,    0, CCM_CGR0, 14, get_rate_ipg, NULL);
 DEFINE_CLOCK(edio_clk,   0, CCM_CGR0, 16, NULL, NULL);
 DEFINE_CLOCK(emi_clk,    0, CCM_CGR0, 18, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit1_clk,  0, CCM_CGR0, 20, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(epit2_clk,  1, CCM_CGR0, 22, get_rate_ipg_per, NULL);
+DEFINE_CLOCK(epit1_clk,  0, CCM_CGR0, 20, get_rate_ipg, NULL);
+DEFINE_CLOCK(epit2_clk,  1, CCM_CGR0, 22, get_rate_ipg, NULL);
 DEFINE_CLOCK(esai_clk,   0, CCM_CGR0, 24, NULL, NULL);
 DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL);
 DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL);
@@ -359,7 +380,7 @@ DEFINE_CLOCK(i2c1_clk,   0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c2_clk,   1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c3_clk,   2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, NULL, NULL);
+DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_hsp, NULL);
 DEFINE_CLOCK(kpp_clk,    0, CCM_CGR1, 20, get_rate_ipg, NULL);
 DEFINE_CLOCK(mlb_clk,    0, CCM_CGR1, 22, get_rate_ahb, NULL);
 DEFINE_CLOCK(mshc_clk,   0, CCM_CGR1, 24, get_rate_mshc, NULL);
@@ -428,19 +449,19 @@ static struct clk nfc_clk = {
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "can", can1_clk)
-	_REGISTER_CLOCK(NULL, "can", can2_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
+	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
+	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
 	_REGISTER_CLOCK(NULL, "ect", ect_clk)
 	_REGISTER_CLOCK(NULL, "edio", edio_clk)
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
-	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
+	_REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk)
+	_REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk)
 	_REGISTER_CLOCK(NULL, "esai", esai_clk)
-	_REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk)
-	_REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk)
-	_REGISTER_CLOCK(NULL, "sdhc", esdhc3_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
@@ -461,7 +482,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
 	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-	_REGISTER_CLOCK(NULL, "sdma", sdma_clk)
+	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
 	_REGISTER_CLOCK(NULL, "spba", spba_clk)
 	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
 	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
@@ -485,10 +506,10 @@ static struct clk_lookup lookups[] = {
 
 int __init mx35_clocks_init()
 {
-	unsigned int ll = 0;
+	unsigned int cgr2 = 3 << 26, cgr3 = 0;
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	ll = (3 << 16);
+	cgr2 |= 3 << 16;
 #endif
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
@@ -499,11 +520,31 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
 	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
 			CCM_BASE + CCM_CGR1);
-	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
-	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
+	/*
+	 * Check if we came up in internal boot mode. If yes, we need some
+	 * extra clocks turned on, otherwise the MX35 boot ROM code will
+	 * hang after a watchdog reset.
+	 */
+	if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
+		/* Additionally turn on UART1, SCC, and IIM clocks */
+		cgr2 |= 3 << 16 | 3 << 4;
+		cgr3 |= 3 << 2;
+	}
+
+	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
+
+	clk_enable(&iim_clk);
+	mx35_read_cpu_rev();
+
+#ifdef CONFIG_MXC_USE_EPIT
+	epit_timer_init(&epit1_clk,
+			MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+#else
 	mxc_timer_init(&gpt_clk,
 			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
+#endif
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
index 861afe0fe3ad..d00a75457812 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-mx3/cpu.c
@@ -25,15 +25,15 @@ struct mx3_cpu_type {
 };
 
 static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
-	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = CHIP_REV_1_0	},
-	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = CHIP_REV_1_1	},
-	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = CHIP_REV_1_1	},
-	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = CHIP_REV_1_1	},
-	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = CHIP_REV_1_1	},
-	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = CHIP_REV_1_2	},
-	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = CHIP_REV_1_2	},
-	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = CHIP_REV_2_0	},
-	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = CHIP_REV_2_0	},
+	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = MX3x_CHIP_REV_1_0 },
+	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = MX3x_CHIP_REV_1_1 },
+	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = MX3x_CHIP_REV_1_1 },
+	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
+	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
+	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = MX3x_CHIP_REV_1_2 },
+	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = MX3x_CHIP_REV_1_2 },
+	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = MX3x_CHIP_REV_2_0 },
+	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = MX3x_CHIP_REV_2_0 },
 };
 
 void __init mx31_read_cpu_rev(void)
@@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void)
 	u32 i, srev;
 
 	/* read SREV register from IIM module */
-	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
+	srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
 		if (srev == mx31_cpu_type[i].srev) {
@@ -55,3 +55,30 @@ void __init mx31_read_cpu_rev(void)
 
 	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
 }
+
+unsigned int mx35_cpu_rev;
+EXPORT_SYMBOL(mx35_cpu_rev);
+
+void __init mx35_read_cpu_rev(void)
+{
+	u32 rev;
+	char *srev = "unknown";
+
+	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+	switch (rev) {
+	case 0x00:
+		mx35_cpu_rev = MX3x_CHIP_REV_1_0;
+		srev = "1.0";
+		break;
+	case 0x10:
+		mx35_cpu_rev = MX3x_CHIP_REV_2_0;
+		srev = "2.0";
+		break;
+	case 0x11:
+		mx35_cpu_rev = MX3x_CHIP_REV_2_1;
+		srev = "2.1";
+		break;
+	}
+
+	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
+}
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
new file mode 100644
index 000000000000..de9598590eba
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx31.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
+#define imx31_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
+#define imx31_add_imx_i2c0(pdata)	imx31_add_imx_i2c(0, pdata)
+#define imx31_add_imx_i2c1(pdata)	imx31_add_imx_i2c(1, pdata)
+#define imx31_add_imx_i2c2(pdata)	imx31_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst;
+#define imx31_add_imx_ssi(id, pdata)    \
+	imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
+#define imx31_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata)
+#define imx31_add_imx_uart0(pdata)	imx31_add_imx_uart(0, pdata)
+#define imx31_add_imx_uart1(pdata)	imx31_add_imx_uart(1, pdata)
+#define imx31_add_imx_uart2(pdata)	imx31_add_imx_uart(2, pdata)
+#define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
+#define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
+
+extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst;
+#define imx31_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst;
+#define imx31_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
+#define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)
+#define imx31_add_spi_imx1(pdata)	imx31_add_cspi(1, pdata)
+#define imx31_add_spi_imx2(pdata)	imx31_add_cspi(2, pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
new file mode 100644
index 000000000000..5eb917b638d0
--- /dev/null
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx35.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fec_data imx35_fec_data __initconst;
+#define imx35_add_fec(pdata)	\
+	imx_add_fec(&imx35_fec_data, pdata)
+
+#define imx35_add_flexcan0(pdata)	\
+	imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata)
+#define imx35_add_flexcan1(pdata)	\
+	imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata)
+
+extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
+#define imx35_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata)
+#define imx35_add_imx_i2c0(pdata)	imx35_add_imx_i2c(0, pdata)
+#define imx35_add_imx_i2c1(pdata)	imx35_add_imx_i2c(1, pdata)
+#define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
+#define imx35_add_imx_ssi(id, pdata)    \
+	imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst;
+#define imx35_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata)
+#define imx35_add_imx_uart0(pdata)	imx35_add_imx_uart(0, pdata)
+#define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
+#define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
+
+extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst;
+#define imx35_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst;
+#define imx35_add_cspi(id, pdata)	\
+	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
+#define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)
+#define imx35_add_spi_imx1(pdata)	imx35_add_cspi(1, pdata)
+
+extern const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst;
+#define imx35_add_esdhc(id, pdata)	\
+	imx_add_esdhc(&imx35_esdhc_data[id], pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index db7acd6e9101..d4da9496089a 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -25,108 +25,10 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/mx3_camera.h>
 
 #include "devices.h"
 
-static struct resource uart0[] = {
-	{
-		.start = UART1_BASE_ADDR,
-		.end = UART1_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART1,
-		.end = MXC_INT_UART1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = UART2_BASE_ADDR,
-		.end = UART2_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART2,
-		.end = MXC_INT_UART2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = UART3_BASE_ADDR,
-		.end = UART3_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART3,
-		.end = MXC_INT_UART3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-#ifdef CONFIG_ARCH_MX31
-static struct resource uart3[] = {
-	{
-		.start = UART4_BASE_ADDR,
-		.end = UART4_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART4,
-		.end = MXC_INT_UART4,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device3 = {
-	.name = "imx-uart",
-	.id = 3,
-	.resource = uart3,
-	.num_resources = ARRAY_SIZE(uart3),
-};
-
-static struct resource uart4[] = {
-	{
-		.start = UART5_BASE_ADDR,
-		.end = UART5_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_UART5,
-		.end = MXC_INT_UART5,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device4 = {
-	.name = "imx-uart",
-	.id = 4,
-	.resource = uart4,
-	.num_resources = ARRAY_SIZE(uart4),
-};
-#endif /* CONFIG_ARCH_MX31 */
-
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
@@ -147,7 +49,7 @@ static struct mxc_gpio_port imx_gpio_ports[] = {
 	}
 };
 
-int __init mxc_register_gpios(void)
+int __init imx3x_register_gpios(void)
 {
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
@@ -167,103 +69,27 @@ struct platform_device mxc_w1_master_device = {
 	.resource = mxc_w1_master_resources,
 };
 
-static struct resource mxc_nand_resources[] = {
-	{
-		.start	= 0, /* runtime dependent */
-		.end	= 0,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_NANDFC,
-		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_nand_device = {
-	.name = "mxc_nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_nand_resources),
-	.resource = mxc_nand_resources,
-};
-
-static struct resource mxc_i2c0_resources[] = {
-	{
-		.start = I2C_BASE_ADDR,
-		.end = I2C_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C,
-		.end = MXC_INT_I2C,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device0 = {
-	.name = "imx-i2c",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_i2c0_resources),
-	.resource = mxc_i2c0_resources,
-};
-
-static struct resource mxc_i2c1_resources[] = {
-	{
-		.start = I2C2_BASE_ADDR,
-		.end = I2C2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C2,
-		.end = MXC_INT_I2C2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device1 = {
-	.name = "imx-i2c",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_i2c1_resources),
-	.resource = mxc_i2c1_resources,
-};
-
-static struct resource mxc_i2c2_resources[] = {
-	{
-		.start = I2C3_BASE_ADDR,
-		.end = I2C3_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_I2C3,
-		.end = MXC_INT_I2C3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_i2c_device2 = {
-	.name = "imx-i2c",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_i2c2_resources),
-	.resource = mxc_i2c2_resources,
-};
-
 #ifdef CONFIG_ARCH_MX31
 static struct resource mxcsdhc0_resources[] = {
 	{
-		.start = MMC_SDHC1_BASE_ADDR,
-		.end = MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+		.start = MX31_MMC_SDHC1_BASE_ADDR,
+		.end = MX31_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_MMC_SDHC1,
-		.end = MXC_INT_MMC_SDHC1,
+		.start = MX31_INT_MMC_SDHC1,
+		.end = MX31_INT_MMC_SDHC1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
 
 static struct resource mxcsdhc1_resources[] = {
 	{
-		.start = MMC_SDHC2_BASE_ADDR,
-		.end = MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+		.start = MX31_MMC_SDHC2_BASE_ADDR,
+		.end = MX31_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_MMC_SDHC2,
-		.end = MXC_INT_MMC_SDHC2,
+		.start = MX31_INT_MMC_SDHC2,
+		.end = MX31_INT_MMC_SDHC2,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -455,126 +281,6 @@ struct platform_device mxc_usbh2 = {
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
-/*
- * SPI master controller
- * 3 channels
- */
-static struct resource mxc_spi_0_resources[] = {
-	{
-	       .start = CSPI1_BASE_ADDR,
-	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MXC_INT_CSPI1,
-	       .end = MXC_INT_CSPI1,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_spi_1_resources[] = {
-	{
-		.start = CSPI2_BASE_ADDR,
-		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI2,
-		.end = MXC_INT_CSPI2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxc_spi_2_resources[] = {
-	{
-		.start = CSPI3_BASE_ADDR,
-		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_CSPI3,
-		.end = MXC_INT_CSPI3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_spi_device0 = {
-	.name = "spi_imx",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_spi_0_resources),
-	.resource = mxc_spi_0_resources,
-};
-
-struct platform_device mxc_spi_device1 = {
-	.name = "spi_imx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_spi_1_resources),
-	.resource = mxc_spi_1_resources,
-};
-
-struct platform_device mxc_spi_device2 = {
-	.name = "spi_imx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_spi_2_resources),
-	.resource = mxc_spi_2_resources,
-};
-
-#ifdef CONFIG_ARCH_MX35
-static struct resource mxc_fec_resources[] = {
-	{
-		.start	= MXC_FEC_BASE_ADDR,
-		.end	= MXC_FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_FEC,
-		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_fec_device = {
-	.name = "fec",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fec_resources),
-	.resource = mxc_fec_resources,
-};
-#endif
-
-static struct resource imx_ssi_resources0[] = {
-	{
-		.start	= SSI1_BASE_ADDR,
-		.end	= SSI1_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MX31_INT_SSI1,
-		.end	= MX31_INT_SSI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource imx_ssi_resources1[] = {
-	{
-		.start	= SSI2_BASE_ADDR,
-		.end	= SSI2_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= MX31_INT_SSI2,
-		.end	= MX31_INT_SSI2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_ssi_device0 = {
-	.name = "imx-ssi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
-	.resource = imx_ssi_resources0,
-};
-
-struct platform_device imx_ssi_device1 = {
-	.name = "imx-ssi",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
-	.resource = imx_ssi_resources1,
-};
-
 static struct resource imx_wdt_resources[] = {
 	{
 		.flags = IORESOURCE_MEM,
@@ -628,16 +334,15 @@ struct platform_device imx_kpp_device = {
 
 static int __init mx3_devices_init(void)
 {
+#if defined(CONFIG_ARCH_MX31)
 	if (cpu_is_mx31()) {
-		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
 		imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
 		imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
 		mxc_register_device(&mxc_rnga_device, NULL);
 	}
+#endif
+#if defined(CONFIG_ARCH_MX35)
 	if (cpu_is_mx35()) {
-		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
 		otg_resources[0].start = MX35_OTG_BASE_ADDR;
 		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
 		otg_resources[1].start = MXC_INT_USBOTG;
@@ -646,13 +351,10 @@ static int __init mx3_devices_init(void)
 		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
 		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
 		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
-		imx_ssi_resources0[1].start = MX35_INT_SSI1;
-		imx_ssi_resources0[1].end = MX35_INT_SSI1;
-		imx_ssi_resources1[1].start = MX35_INT_SSI2;
-		imx_ssi_resources1[1].end = MX35_INT_SSI2;
 		imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
 		imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
 	}
+#endif
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 2c3c8646a29e..585f814473d5 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -1,18 +1,7 @@
-
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
-extern struct platform_device mxc_i2c_device0;
-extern struct platform_device mxc_i2c_device1;
-extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
 extern struct platform_device mx3_camera;
-extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
@@ -20,12 +9,6 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-extern struct platform_device mxc_spi_device2;
-extern struct platform_device imx_ssi_device0;
-extern struct platform_device imx_ssi_device1;
-extern struct platform_device imx_ssi_device1;
 extern struct platform_device imx_wdt_device0;
 extern struct platform_device imx_rtc_device0;
 extern struct platform_device imx_kpp_device;
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
new file mode 100644
index 000000000000..1abc10d52922
--- /dev/null
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <video/platform_lcd.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+#include <mach/audmux.h>
+
+#include "devices-imx35.h"
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+	{
+		.name		= "CMO-QVGA",
+		.refresh	= 60,
+		.xres		= 320,
+		.yres		= 240,
+		.pixclock	= KHZ2PICOS(6500),
+		.left_margin	= 68,
+		.right_margin	= 20,
+		.upper_margin	= 15,
+		.lower_margin	= 4,
+		.hsync_len	= 30,
+		.vsync_len	= 3,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+	{
+		.name		= "DVI-VGA",
+		.refresh	= 60,
+		.xres		= 640,
+		.yres		= 480,
+		.pixclock	= 32000,
+		.left_margin	= 100,
+		.right_margin	= 100,
+		.upper_margin	= 7,
+		.lower_margin	= 100,
+		.hsync_len	= 7,
+		.vsync_len	= 7,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+	{
+		.name		= "DVI-SVGA",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 600,
+		.pixclock	= 25000,
+		.left_margin	= 75,
+		.right_margin	= 75,
+		.upper_margin	= 7,
+		.lower_margin	= 75,
+		.hsync_len	= 7,
+		.vsync_len	= 7,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
+				  FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
+	},
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.name		= "CMO-QVGA",
+	.mode		= fb_modedb,
+	.num_modes	= ARRAY_SIZE(fb_modedb),
+};
+
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+	/* LCD */
+	MX35_PAD_LD0__IPU_DISPB_DAT_0,
+	MX35_PAD_LD1__IPU_DISPB_DAT_1,
+	MX35_PAD_LD2__IPU_DISPB_DAT_2,
+	MX35_PAD_LD3__IPU_DISPB_DAT_3,
+	MX35_PAD_LD4__IPU_DISPB_DAT_4,
+	MX35_PAD_LD5__IPU_DISPB_DAT_5,
+	MX35_PAD_LD6__IPU_DISPB_DAT_6,
+	MX35_PAD_LD7__IPU_DISPB_DAT_7,
+	MX35_PAD_LD8__IPU_DISPB_DAT_8,
+	MX35_PAD_LD9__IPU_DISPB_DAT_9,
+	MX35_PAD_LD10__IPU_DISPB_DAT_10,
+	MX35_PAD_LD11__IPU_DISPB_DAT_11,
+	MX35_PAD_LD12__IPU_DISPB_DAT_12,
+	MX35_PAD_LD13__IPU_DISPB_DAT_13,
+	MX35_PAD_LD14__IPU_DISPB_DAT_14,
+	MX35_PAD_LD15__IPU_DISPB_DAT_15,
+	MX35_PAD_LD16__IPU_DISPB_DAT_16,
+	MX35_PAD_LD17__IPU_DISPB_DAT_17,
+	MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+	MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+	MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+	/* Backlight */
+	MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+	/* LCD_PWR */
+	MX35_PAD_D3_CLS__GPIO1_4,
+	/* LED */
+	MX35_PAD_LD23__GPIO3_29,
+	/* SWITCH */
+	MX35_PAD_LD19__GPIO3_25,
+	/* UART2 */
+	MX35_PAD_CTS2__UART2_CTS,
+	MX35_PAD_RTS2__UART2_RTS,
+	MX35_PAD_TXD2__UART2_TXD_MUX,
+	MX35_PAD_RXD2__UART2_RXD_MUX,
+	/* I2S */
+	MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+	/* CAN2 */
+	MX35_PAD_TX5_RX0__CAN2_TXCAN,
+	MX35_PAD_TX4_RX1__CAN2_RXCAN,
+	/* SDCARD */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+};
+
+#define GPIO_LED1	(2 * 32 + 29)
+#define GPIO_SWITCH1	(2 * 32 + 25)
+#define GPIO_LCDPWR	(4)
+
+static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(GPIO_LCDPWR, 1);
+	else
+		gpio_direction_output(GPIO_LCDPWR, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
+	.set_power		= eukrea_mbimxsd_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
+};
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &eukrea_mbimxsd_led_info,
+	},
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device eukrea_mbimxsd_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &eukrea_mbimxsd_button_data,
+	}
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_leds_gpio,
+	&eukrea_mbimxsd_button_device,
+	&eukrea_mbimxsd_lcd_powerdev,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
+	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx35 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd35_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
+	/* SSI unit master I2S codec connected to SSI_AUD4 */
+	mxc_audmux_v2_configure_port(0,
+			MXC_AUDMUX_V2_PTCR_SYN |
+			MXC_AUDMUX_V2_PTCR_TFSDIR |
+			MXC_AUDMUX_V2_PTCR_TFSEL(3) |
+			MXC_AUDMUX_V2_PTCR_TCLKDIR |
+			MXC_AUDMUX_V2_PTCR_TCSEL(3),
+			MXC_AUDMUX_V2_PDCR_RXDSEL(3)
+	);
+	mxc_audmux_v2_configure_port(3,
+			MXC_AUDMUX_V2_PTCR_SYN,
+			MXC_AUDMUX_V2_PDCR_RXDSEL(0)
+	);
+#endif
+
+	imx35_add_imx_uart1(&uart_pdata);
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
+	imx35_add_flexcan1(NULL);
+	imx35_add_esdhc(0, NULL);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	gpio_request(GPIO_LCDPWR, "LCDPWR");
+	gpio_direction_output(GPIO_LCDPWR, 1);
+	gpio_free(GPIO_LCDPWR);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 5f72ec91af2d..aaa30fe18f85 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -48,16 +48,14 @@
 #include <asm/mach/map.h>
 
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/board-armadillo5x0.h>
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 #include "crm_regs.h"
 
@@ -301,7 +299,8 @@ static struct platform_device armadillo5x0_button_device = {
 /*
  * NAND Flash
  */
-static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+armadillo5x0_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 };
@@ -493,13 +492,12 @@ static struct platform_device armadillo5x0_smc911x_device = {
 };
 
 /* UART device data */
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
-	&mxc_i2c_device1,
 	&armadillo5x0_button_device,
 };
 
@@ -512,10 +510,11 @@ static void __init armadillo5x0_init(void)
 			ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx31_add_imx_i2c1(NULL);
 
 	/* Register UART */
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 
 	/* SMSC9118 IRQ pin */
 	gpio_direction_input(MX31_PIN_GPIO1_0);
@@ -532,7 +531,7 @@ static void __init armadillo5x0_init(void)
 			    &armadillo5x0_nor_flash_pdata);
 
 	/* Register NAND Flash */
-	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
@@ -552,9 +551,9 @@ static void __init armadillo5x0_init(void)
 	/* USB */
 #if defined(CONFIG_USB_ULPI)
 	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 	mxc_register_device(&mxc_otg_host, &usbotg_pdata);
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
@@ -572,8 +571,6 @@ static struct sys_timer armadillo5x0_timer = {
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
new file mode 100644
index 000000000000..9fde873f5889
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+#include <linux/i2c-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+
+#include "devices-imx35.h"
+#include "devices.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct imxi2c_platform_data
+		eukrea_cpuimx35_i2c0_data __initconst = {
+	.bitrate =		100000,
+};
+
+static struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+};
+
+#define TSC2007_IRQGPIO		(2 * 32 + 2)
+static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
+		I2C_BOARD_INFO("tsc2007", 0x48),
+		.type		= "tsc2007",
+		.platform_data	= &tsc2007_info,
+		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&imx_wdt_device0,
+};
+
+static struct pad_desc eukrea_cpuimx35_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* I2C1 */
+	MX35_PAD_I2C1_CLK__I2C1_SCL,
+	MX35_PAD_I2C1_DAT__I2C1_SDA,
+	/* TSC2007 IRQ */
+	MX35_PAD_ATA_DA2__GPIO3_2,
+};
+
+static const struct mxc_nand_platform_data
+		eukrea_cpuimx35_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static struct mxc_usbh_platform_data __maybe_unused otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = {
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+		  MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI,
+	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx35_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx35_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads,
+			ARRAY_SIZE(eukrea_cpuimx35_pads));
+
+	imx35_add_fec(NULL);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx35_add_imx_uart0(&uart_pdata);
+	imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices,
+			ARRAY_SIZE(eukrea_cpuimx35_i2c_devices));
+	imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
+
+	if (otg_mode_host)
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	else
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
+	eukrea_mbimxsd35_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx35_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer eukrea_cpuimx35_timer = {
+	.init	= eukrea_cpuimx35_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
+	/* Maintainer: Eukrea Electromatique */
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mx35_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &eukrea_cpuimx35_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index f085d5d1a6de..042cd5655e17 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -16,10 +16,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/gpio.h>
@@ -37,13 +33,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/board-kzmarm11.h>
 #include <mach/clock.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/memory.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 #define KZM_ARM11_IO_ADDRESS(x) (					\
@@ -51,6 +46,23 @@
 	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
 	MX31_IO_ADDRESS(x))
 
+/*
+ *  KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
+
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
+
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
@@ -173,15 +185,14 @@ static inline int kzm_init_smsc9118(void)
 #endif
 
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static void __init kzm_init_imx_uart(void)
 {
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 }
 #else
 static inline void kzm_init_imx_uart(void)
@@ -263,8 +274,6 @@ static struct sys_timer kzm_timer = {
  * initialize __mach_desc_KZM_ARM11_01 data structure.
  */
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.phys_io        = MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = kzm_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 58e57291b79d..0ad9e7821082 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -22,7 +18,6 @@
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/smsc911x.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
@@ -37,19 +32,17 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31_3ds.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
+#include <mach/3ds_debugboard.h>
+
+#include "devices-imx31.h"
 #include "devices.h"
 
-/*!
- * @file mx31_3ds.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 static int mx31_3ds_pins[] = {
@@ -145,7 +138,7 @@ static int spi1_internal_chipselect[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect	= spi1_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
 };
@@ -165,7 +158,8 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
 /*
  * NAND Flash
  */
-static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+static const struct mxc_nand_platform_data
+mx31_3ds_nand_board_info __initconst = {
 	.width		= 1,
 	.hw_ecc		= 1,
 #ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
@@ -182,8 +176,10 @@ static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
 
 #define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
 
-static void mx31_3ds_usbotg_init(void)
+static int mx31_3ds_usbotg_init(void)
 {
+	int err;
+
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
@@ -197,10 +193,25 @@ static void mx31_3ds_usbotg_init(void)
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
 	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
 
-	gpio_request(USBOTG_RST_B, "otgusb-reset");
-	gpio_direction_output(USBOTG_RST_B, 0);
+	err = gpio_request(USBOTG_RST_B, "otgusb-reset");
+	if (err) {
+		pr_err("Failed to request the USB OTG reset gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(USBOTG_RST_B, 0);
+	if (err) {
+		pr_err("Failed to drive the USB OTG reset gpio\n");
+		goto usbotg_free_reset;
+	}
+
 	mdelay(1);
 	gpio_set_value(USBOTG_RST_B, 1);
+	return 0;
+
+usbotg_free_reset:
+	gpio_free(USBOTG_RST_B);
+	return err;
 }
 
 static struct fsl_usb2_platform_data usbotg_pdata = {
@@ -208,178 +219,16 @@ static struct fsl_usb2_platform_data usbotg_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 /*
- * Support for the SMSC9217 on the Debug board.
- */
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource smsc911x_resources[] = {
-	{
-		.start		= LAN9217_BASE_ADDR,
-		.end		= LAN9217_BASE_ADDR + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= EXPIO_INT_ENET,
-		.end		= EXPIO_INT_ENET,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smsc911x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smsc911x_resources),
-	.resource	= smsc911x_resources,
-	.dev		= {
-		.platform_data = &smsc911x_config,
-	},
-};
-
-/*
- * Routines for the CPLD on the debug board. It contains a CPLD handling
- * LEDs, switches, interrupts for Ethernet.
- */
-
-static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
-{
-	uint32_t imr_val;
-	uint32_t int_valid;
-	uint32_t expio_irq;
-
-	imr_val = __raw_readw(CPLD_INT_MASK_REG);
-	int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
-
-	expio_irq = MXC_EXP_IO_BASE;
-	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
-		if ((int_valid & 1) == 0)
-			continue;
-		generic_handle_irq(expio_irq);
-	}
-}
-
-/*
- * Disable an expio pin's interrupt by setting the bit in the imr.
- * @param irq           an expio virtual irq number
- */
-static void expio_mask_irq(uint32_t irq)
-{
-	uint16_t reg;
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* mask the interrupt */
-	reg = __raw_readw(CPLD_INT_MASK_REG);
-	reg |= 1 << expio;
-	__raw_writew(reg, CPLD_INT_MASK_REG);
-}
-
-/*
- * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
- * @param irq           an expanded io virtual irq number
- */
-static void expio_ack_irq(uint32_t irq)
-{
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* clear the interrupt status */
-	__raw_writew(1 << expio, CPLD_INT_RESET_REG);
-	__raw_writew(0, CPLD_INT_RESET_REG);
-	/* mask the interrupt */
-	expio_mask_irq(irq);
-}
-
-/*
- * Enable a expio pin's interrupt by clearing the bit in the imr.
- * @param irq           a expio virtual irq number
- */
-static void expio_unmask_irq(uint32_t irq)
-{
-	uint16_t reg;
-	uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
-
-	/* unmask the interrupt */
-	reg = __raw_readw(CPLD_INT_MASK_REG);
-	reg &= ~(1 << expio);
-	__raw_writew(reg, CPLD_INT_MASK_REG);
-}
-
-static struct irq_chip expio_irq_chip = {
-	.ack = expio_ack_irq,
-	.mask = expio_mask_irq,
-	.unmask = expio_unmask_irq,
-};
-
-static int __init mx31_3ds_init_expio(void)
-{
-	int i;
-	int ret;
-
-	/* Check if there's a debug board connected */
-	if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
-	    (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
-	    (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
-		/* No Debug board found */
-		return -ENODEV;
-	}
-
-	pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n",
-		__raw_readw(CPLD_CODE_VER_REG));
-
-	/*
-	 * Configure INT line as GPIO input
-	 */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
-	if (ret)
-		pr_warning("could not get LAN irq gpio\n");
-	else
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
-
-	/* Disable the interrupts and clear the status */
-	__raw_writew(0, CPLD_INT_MASK_REG);
-	__raw_writew(0xFFFF, CPLD_INT_RESET_REG);
-	__raw_writew(0, CPLD_INT_RESET_REG);
-	__raw_writew(0x1F, CPLD_INT_MASK_REG);
-	for (i = MXC_EXP_IO_BASE;
-	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
-	     i++) {
-		set_irq_chip(i, &expio_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
-	set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler);
-
-	return 0;
-}
-
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc mx31_3ds_io_desc[] __initdata = {
-	{
-		.virtual = MX31_CS5_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
-		.length = MX31_CS5_SIZE,
-		.type = MT_DEVICE,
-	},
-};
-
-/*
  * Set up static virtual mappings.
  */
 static void __init mx31_3ds_map_io(void)
 {
 	mx31_map_io();
-	iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc));
 }
 
 /*!
@@ -390,10 +239,10 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
 				      "mx31_3ds");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
 
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(mx31_3ds_spi_devs,
 						ARRAY_SIZE(mx31_3ds_spi_devs));
 
@@ -402,8 +251,9 @@ static void __init mxc_board_init(void)
 	mx31_3ds_usbotg_init();
 	mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
 
-	if (!mx31_3ds_init_expio())
-		platform_device_register(&smsc911x_device);
+	if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		printk(KERN_WARNING "Init of the debug board failed, all "
+				    "devices on the debug board are unusable.\n");
 }
 
 static void __init mx31_3ds_timer_init(void)
@@ -421,8 +271,6 @@ static struct sys_timer mx31_3ds_timer = {
  */
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_3ds_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index b3d1a1895c20..b993b9bf6179 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -26,7 +22,6 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -34,7 +29,6 @@
 #include <asm/mach/map.h>
 #include <mach/common.h>
 #include <mach/board-mx31ads.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
@@ -43,14 +37,40 @@
 #include <linux/mfd/wm8350/pmic.h>
 #endif
 
+#include "devices-imx31.h"
 #include "devices.h"
 
-/*!
- * @file mx31ads.c
- *
- * @brief This file contains the board-specific initialization routines.
- *
- * @ingroup System
+/* PBC Board interrupt status register */
+#define PBC_INTSTATUS           0x000016
+
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS      0x000018
+
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET         0x00001A
+
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR       0x00001C
+
+/* External UART A */
+#define PBC_SC16C652_UARTA      0x010000
+
+/* External UART B */
+#define PBC_SC16C652_UARTB      0x010010
+
+#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
+
+#define MXC_MAX_EXP_IO_LINES	16
+/*
+ * This file contains the board-specific initialization routines.
  */
 
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
@@ -98,7 +118,7 @@ static inline int mxc_init_extuart(void)
 #endif
 
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -112,7 +132,7 @@ static unsigned int uart_pins[] = {
 static inline void mxc_init_imx_uart(void)
 {
 	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 }
 #else /* !SERIAL_IMX */
 static inline void mxc_init_imx_uart(void)
@@ -475,7 +495,7 @@ static void mxc_init_i2c(void)
 	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MOSI, IOMUX_CONFIG_ALT1));
 	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_CSPI2_MISO, IOMUX_CONFIG_ALT1));
 
-	mxc_register_device(&mxc_i2c_device1, NULL);
+	imx31_add_imx_i2c1(NULL);
 }
 #else
 static void mxc_init_i2c(void)
@@ -492,7 +512,7 @@ static unsigned int ssi_pins[] = {
 
 static void mxc_init_audio(void)
 {
-	mxc_register_device(&imx_ssi_device0, NULL);
+	imx31_add_imx_ssi(0, NULL);
 	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
 }
 
@@ -549,8 +569,6 @@ static struct sys_timer mx31ads_timer = {
  */
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31ads_map_io,
 	.init_irq       = mx31ads_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index b2c7f512070f..42f47faa6fd6 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -46,10 +42,10 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -249,9 +245,9 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 static void lilly1131_usb_init(void)
 {
 	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
@@ -269,12 +265,12 @@ static int spi_internal_chipselect[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
 	.chipselect = spi_internal_chipselect,
 	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect = spi_internal_chipselect,
 	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -289,6 +285,7 @@ static struct spi_board_info mc13783_dev __initdata = {
 	.bus_num	= 1,
 	.chip_select	= 0,
 	.platform_data	= &mc13783_pdata,
+	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
 };
 
 static struct platform_device *devices[] __initdata = {
@@ -331,8 +328,8 @@ static void __init mx31lilly_board_init(void)
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
 
-	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_dev, 1);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -351,8 +348,6 @@ static struct sys_timer mx31lilly_timer = {
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 2b6d11400877..b93895814cdf 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -42,14 +38,12 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/board-mx31lite.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -69,7 +63,8 @@ static unsigned int mx31lite_pins[] = {
 	MX31_PIN_CSPI2_SS2__SS2,
 };
 
-static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+static const struct mxc_nand_platform_data
+mx31lite_nand_board_info __initconst  = {
 	.width = 1,
 	.hw_ecc = 1,
 };
@@ -112,7 +107,7 @@ static int spi_internal_chipselect[] = {
 	MXC_SPI_CS(0),
 };
 
-static struct spi_imx_master spi1_pdata = {
+static const struct spi_imx_master spi1_pdata __initconst = {
 	.chipselect	= spi_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -253,15 +248,15 @@ static void __init mxc_board_init(void)
 
 	/* NOR and NAND flash */
 	platform_device_register(&physmap_flash_device);
-	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+	imx31_add_mxc_nand(&mx31lite_nand_board_info);
 
-	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
 #if defined(CONFIG_USB_ULPI)
 	/* USB */
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 #endif
@@ -287,8 +282,6 @@ struct sys_timer mx31lite_timer = {
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31lite_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index 62b5e40165df..eb5f426df224 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -42,16 +38,15 @@
 #include <mach/board-mx31moboard.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/i2c.h>
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/mx3_camera.h>
 #include <mach/spi.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int moboard_pins[] = {
@@ -130,24 +125,36 @@ static struct platform_device mx31moboard_flash = {
 
 static int moboard_uart0_init(struct platform_device *pdev)
 {
-	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
-	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
-	return 0;
+	int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	if (ret)
+		return ret;
+
+	ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+	if (ret)
+		gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
+
+	return ret;
+}
+
+static void moboard_uart0_exit(struct platform_device *pdev)
+{
+	gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
 }
 
-static struct imxuart_platform_data uart0_pdata = {
+static const struct imxuart_platform_data uart0_pdata __initconst = {
 	.init = moboard_uart0_init,
+	.exit = moboard_uart0_exit,
 };
 
-static struct imxuart_platform_data uart4_pdata = {
+static const struct imxuart_platform_data uart4_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct imxi2c_platform_data moboard_i2c0_pdata = {
+static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
 	.bitrate = 400000,
 };
 
-static struct imxi2c_platform_data moboard_i2c1_pdata = {
+static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
@@ -156,7 +163,7 @@ static int moboard_spi1_cs[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master moboard_spi1_master = {
+static const struct spi_imx_master moboard_spi1_pdata __initconst = {
 	.chipselect	= moboard_spi1_cs,
 	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
 };
@@ -286,7 +293,7 @@ static int moboard_spi2_cs[] = {
 	MXC_SPI_CS(1),
 };
 
-static struct spi_imx_master moboard_spi2_master = {
+static const struct spi_imx_master moboard_spi2_pdata __initconst = {
 	.chipselect	= moboard_spi2_cs,
 	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
 };
@@ -405,7 +412,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 static int __init moboard_usbh2_init(void)
 {
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 	return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 }
@@ -499,15 +506,14 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart0_pdata);
-
-	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
+	imx31_add_imx_uart0(&uart0_pdata);
+	imx31_add_imx_uart4(&uart4_pdata);
 
-	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
-	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+	imx31_add_imx_i2c0(&moboard_i2c0_data);
+	imx31_add_imx_i2c1(&moboard_i2c1_data);
 
-	mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
-	mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+	imx31_add_spi_imx1(&moboard_spi1_pdata);
+	imx31_add_spi_imx2(&moboard_spi2_pdata);
 
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
@@ -554,8 +560,6 @@ struct sys_timer mx31moboard_timer = {
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
new file mode 100644
index 000000000000..b66a75aa2e88
--- /dev/null
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This machine is known as:
+ *  - i.MX35 3-Stack Development System
+ *  - i.MX35 Platform Development Kit (i.MX35 PDK)
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/fsl_devices.h>
+
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx35.h>
+#include <mach/irqs.h>
+#include <mach/3ds_debugboard.h>
+#include <mach/mxc_ehci.h>
+
+#include "devices-imx35.h"
+#include "devices.h"
+
+#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct physmap_flash_data mx35pdk_flash_data = {
+	.width  = 2,
+};
+
+static struct resource mx35pdk_flash_resource = {
+	.start	= MX35_CS0_BASE_ADDR,
+	.end	= MX35_CS0_BASE_ADDR + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device mx35pdk_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &mx35pdk_flash_data,
+	},
+	.resource = &mx35pdk_flash_resource,
+	.num_resources = 1,
+};
+
+static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+	.flash_bbt = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mx35pdk_flash,
+};
+
+static struct pad_desc mx35pdk_pads[] = {
+	/* UART1 */
+	MX35_PAD_CTS1__UART1_CTS,
+	MX35_PAD_RTS1__UART1_RTS,
+	MX35_PAD_TXD1__UART1_TXD_MUX,
+	MX35_PAD_RXD1__UART1_RXD_MUX,
+	/* FEC */
+	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX35_PAD_FEC_COL__FEC_COL,
+	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX35_PAD_FEC_MDC__FEC_MDC,
+	MX35_PAD_FEC_MDIO__FEC_MDIO,
+	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+	MX35_PAD_FEC_CRS__FEC_CRS,
+	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* USBOTG */
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+	/* USBH1 */
+	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
+	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+	/* SDCARD */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
+};
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_otg_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
+/* USB HOST config */
+static struct mxc_usbh_platform_data usb_host_pdata = {
+	.portsc		= MXC_EHCI_MODE_SERIAL,
+	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
+			  MXC_EHCI_INTERNAL_PHY,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+
+	imx35_add_fec(NULL);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx35_add_imx_uart0(&uart_pdata);
+
+	mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata);
+
+	mxc_register_device(&mxc_usbh1, &usb_host_pdata);
+
+	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
+	imx35_add_esdhc(0, NULL);
+
+	if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		pr_warn("Init of the debugboard failed, all "
+				"devices on the debugboard are unusable.\n");
+}
+
+static void __init mx35pdk_timer_init(void)
+{
+	mx35_clocks_init();
+}
+
+struct sys_timer mx35pdk_timer = {
+	.init	= mx35pdk_timer_init,
+};
+
+MACHINE_START(MX35_3DS, "Freescale MX35PDK")
+	/* Maintainer: Freescale Semiconductor, Inc */
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
+	.map_io         = mx35_map_io,
+	.init_irq       = mx35_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx35pdk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-mx35pdk.c b/arch/arm/mach-mx3/mach-mx35pdk.c
deleted file mode 100644
index bcac84d4dca4..000000000000
--- a/arch/arm/mach-mx3/mach-mx35pdk.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/memory.h>
-#include <linux/gpio.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx35.h>
-
-#include "devices.h"
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mxc_fec_device,
-};
-
-static struct pad_desc mx35pdk_pads[] = {
-	/* UART1 */
-	MX35_PAD_CTS1__UART1_CTS,
-	MX35_PAD_RTS1__UART1_RTS,
-	MX35_PAD_TXD1__UART1_TXD_MUX,
-	MX35_PAD_RXD1__UART1_RXD_MUX,
-	/* FEC */
-	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
-	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX35_PAD_FEC_COL__FEC_COL,
-	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
-	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
-	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX35_PAD_FEC_MDC__FEC_MDC,
-	MX35_PAD_FEC_MDIO__FEC_MDIO,
-	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
-	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
-	MX35_PAD_FEC_CRS__FEC_CRS,
-	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
-	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
-	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
-	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
-	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
-	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
-	/* USBOTG */
-	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
-	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
-};
-
-/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mxc_board_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
-}
-
-static void __init mx35pdk_timer_init(void)
-{
-	mx35_clocks_init();
-}
-
-struct sys_timer mx35pdk_timer = {
-	.init	= mx35pdk_timer_init,
-};
-
-MACHINE_START(MX35_3DS, "Freescale MX35PDK")
-	/* Maintainer: Freescale Semiconductor, Inc */
-	.phys_io	= MX35_AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx35_map_io,
-	.init_irq       = mx35_init_irq,
-	.init_machine   = mxc_board_init,
-	.timer          = &mx35pdk_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index cce410662383..2ff3f661a48e 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -43,20 +39,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/board-pcm037.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
 #include <mach/mmc.h>
 #include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 #include "pcm037.h"
 
@@ -225,7 +218,7 @@ static struct platform_device pcm037_flash = {
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -279,16 +272,17 @@ static struct platform_device pcm037_sram_device = {
 	.resource = &pcm038_sram_resource,
 };
 
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
 
-static struct imxi2c_platform_data pcm037_i2c_1_data = {
+static const struct imxi2c_platform_data pcm037_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
-static struct imxi2c_platform_data pcm037_i2c_2_data = {
+static const struct imxi2c_platform_data pcm037_i2c2_data __initconst = {
 	.bitrate = 20000,
 };
 
@@ -317,7 +311,6 @@ static struct soc_camera_link iclink_mt9v022 = {
 	.bus_id		= 0,		/* Must match with the camera ID */
 	.board_info	= &pcm037_i2c_camera[1],
 	.i2c_adapter_id	= 2,
-	.module_name	= "mt9v022",
 };
 
 static struct soc_camera_link iclink_mt9t031 = {
@@ -325,7 +318,6 @@ static struct soc_camera_link iclink_mt9t031 = {
 	.power		= pcm037_camera_power,
 	.board_info	= &pcm037_i2c_camera[0],
 	.i2c_adapter_id	= 2,
-	.module_name	= "mt9t031",
 };
 
 static struct i2c_board_info pcm037_i2c_devices[] = {
@@ -545,6 +537,7 @@ static struct platform_device pcm970_sja1000 = {
 	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
 };
 
+#if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -554,6 +547,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -581,7 +575,6 @@ __setup("otg_mode=", pcm037_otg_mode);
 static void __init mxc_board_init(void)
 {
 	int ret;
-	u32 tmp;
 
 	mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
 
@@ -614,9 +607,10 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
 
 	mxc_register_device(&mxc_w1_master_device, NULL);
 
@@ -634,10 +628,10 @@ static void __init mxc_board_init(void)
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+	imx31_add_imx_i2c1(&pcm037_i2c1_data);
+	imx31_add_imx_i2c2(&pcm037_i2c2_data);
 
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+	imx31_add_mxc_nand(&pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
@@ -658,13 +652,13 @@ static void __init mxc_board_init(void)
 #if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 		mxc_register_device(&mxc_otg_host, &otg_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 #endif
@@ -684,8 +678,6 @@ struct sys_timer pcm037_timer = {
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
-	.phys_io	= MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 8d386000fc40..99e0894e07db 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -13,15 +13,13 @@
 #include <linux/spi/spi.h>
 
 #include <mach/common.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
 #include <mach/iomux-mx3.h>
 
 #include <asm/mach-types.h>
 
 #include "pcm037.h"
 #include "devices.h"
+#include "devices-imx31.h"
 
 static unsigned int pcm037_eet_pins[] = {
 	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
@@ -64,7 +62,7 @@ static struct spi_board_info pcm037_spi_dev[] = {
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
 
-struct spi_imx_master pcm037_spi1_master = {
+static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
 	.chipselect = pcm037_spi1_cs,
 	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
 };
@@ -184,7 +182,7 @@ static int eet_init_devices(void)
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-	mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+	imx31_add_spi_imx0(&pcm037_spi1_pdata);
 #endif
 
 	platform_device_register(&pcm037_gpio_keys_device);
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 78d9185a9d4b..4e1de87995d4 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -40,19 +36,14 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-#include <mach/i2c.h>
-#endif
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_nand.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
-#include <mach/ssi.h>
 
+#include "devices-imx35.h"
 #include "devices.h"
 
 static const struct fb_videomode fb_modedb[] = {
@@ -122,12 +113,12 @@ static struct platform_device pcm043_flash = {
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
-static struct imxi2c_platform_data pcm043_i2c_1_data = {
+static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
 	.bitrate = 50000,
 };
 
@@ -149,7 +140,6 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
 
 static struct platform_device *devices[] __initdata = {
 	&pcm043_flash,
-	&mxc_fec_device,
 	&imx_wdt_device0,
 };
 
@@ -222,6 +212,16 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
 	MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
 	MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+	/* CAN2 */
+	MX35_PAD_TX5_RX0__CAN2_TXCAN,
+	MX35_PAD_TX4_RX1__CAN2_RXCAN,
+	/* esdhc */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
 #define AC97_GPIO_TXFS	(1 * 32 + 31)
@@ -298,17 +298,19 @@ err1:
 	mdelay(1);
 }
 
-static struct imx_ssi_platform_data pcm043_ssi_pdata = {
+static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = {
 	.ac97_reset = pcm043_ac97_cold_reset,
 	.ac97_warm_reset = pcm043_ac97_warm_reset,
 	.flags = IMX_SSI_USE_AC97,
 };
 
-static struct mxc_nand_platform_data pcm037_nand_board_info = {
+static const struct mxc_nand_platform_data
+pcm037_nand_board_info __initconst = {
 	.width = 1,
 	.hw_ecc = 1,
 };
 
+#if defined(CONFIG_USB_ULPI)
 static struct mxc_usbh_platform_data otg_pdata = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -319,6 +321,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = {
 	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
 		  MXC_EHCI_IPPUE_DOWN,
 };
+#endif
 
 static struct fsl_usb2_platform_data otg_device_pdata = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -359,19 +362,20 @@ static void __init mxc_board_init(void)
 			MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
 			MXC_AUDMUX_V2_PDCR_RXDSEL(3));
 
+	imx35_add_fec(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
-	mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
+	imx35_add_imx_uart0(&uart_pdata);
+	imx35_add_mxc_nand(&pcm037_nand_board_info);
+	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx35_add_imx_uart1(&uart_pdata);
 
 #if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
 	i2c_register_board_info(0, pcm043_i2c_devices,
 			ARRAY_SIZE(pcm043_i2c_devices));
 
-	mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+	imx35_add_imx_i2c0(&pcm043_i2c0_data);
 #endif
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
@@ -380,7 +384,7 @@ static void __init mxc_board_init(void)
 #if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 		mxc_register_device(&mxc_otg_host, &otg_pdata);
 	}
@@ -390,6 +394,8 @@ static void __init mxc_board_init(void)
 	if (!otg_mode_host)
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 
+	imx35_add_flexcan1(NULL);
+	imx35_add_esdhc(0, NULL);
 }
 
 static void __init pcm043_timer_init(void)
@@ -403,8 +409,6 @@ struct sys_timer pcm043_timer = {
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	/* Maintainer: Pengutronix */
-	.phys_io	= MX35_AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
 	.init_irq       = mx35_init_irq,
diff --git a/arch/arm/mach-mx3/mach-qong.c b/arch/arm/mach-mx3/mach-qong.c
index e5b5b8323a17..fd1050c40964 100644
--- a/arch/arm/mach-mx3/mach-qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/types.h>
@@ -34,9 +30,9 @@
 #include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <mach/board-qong.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+
+#include "devices-imx31.h"
 #include "devices.h"
 
 /* FPGA defines */
@@ -62,7 +58,7 @@
  * This file contains the board-specific initialization routines.
  */
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -73,11 +69,11 @@ static int uart_pins[] = {
 	MX31_PIN_RXD1__RXD1
 };
 
-static inline void mxc_init_imx_uart(void)
+static inline void __init mxc_init_imx_uart(void)
 {
 	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins),
 			"uart-0");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 }
 
 static struct resource dnet_resources[] = {
@@ -116,7 +112,7 @@ static struct physmap_flash_data qong_flash_data = {
 
 static struct resource qong_flash_resource = {
 	.start = MX31_CS0_BASE_ADDR,
-	.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+	.end = MX31_CS0_BASE_ADDR + SZ_128M - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -169,6 +165,7 @@ static void qong_nand_select_chip(struct mtd_info *mtd, int chip)
 
 static struct platform_nand_data qong_nand_data = {
 	.chip = {
+		.nr_chips		= 1,
 		.chip_delay		= 20,
 		.options		= 0,
 	},
@@ -273,8 +270,6 @@ static struct sys_timer qong_timer = {
 
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	/* Maintainer: DENX Software Engineering GmbH */
-	.phys_io        = MX31_AIPS1_BASE_ADDR,
-	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 6858a4f9806c..b4ffc531a82c 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/mm.h>
@@ -97,9 +93,12 @@ void __init mx35_map_io(void)
 }
 #endif
 
+int imx3x_register_gpios(void);
+
 void __init mx31_init_irq(void)
 {
 	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+	imx3x_register_gpios();
 }
 
 void __init mx35_init_irq(void)
@@ -111,6 +110,24 @@ void __init mx35_init_irq(void)
 static int mxc_init_l2x0(void)
 {
 	void __iomem *l2x0_base;
+	void __iomem *clkctl_base;
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value
+ */
+#define L2_MEM_VAL 0x10
+
+	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+	if (clkctl_base != NULL) {
+		writel(0x00000515, clkctl_base + L2_MEM_VAL);
+		iounmap(clkctl_base);
+	} else {
+		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+	}
 
 	l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
 	if (IS_ERR(l2x0_base)) {
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 7aebd74a12e8..827fd3c80201 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
@@ -36,13 +32,13 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
 #include <mach/mmc.h>
 #include <mach/mx3fb.h>
 #include <mach/ipu.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -96,7 +92,7 @@ static unsigned int lilly_db_board_pins[] __initdata = {
 };
 
 /* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -217,9 +213,9 @@ void __init mx31lilly_db_init(void)
 	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
 					ARRAY_SIZE(lilly_db_board_pins),
 					"development board pins");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
 	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
 	mx31lilly_init_fb();
 }
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 5f05bfbec380..7b0e74e275ba 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -18,10 +18,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
@@ -37,12 +33,11 @@
 
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lite.h>
 #include <mach/mmc.h>
-#include <mach/spi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 /*
@@ -76,7 +71,7 @@ static unsigned int litekit_db_board_pins[] __initdata = {
 };
 
 /* UART */
-static struct imxuart_platform_data uart_pdata __initdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -161,7 +156,7 @@ static int spi_internal_chipselect[] = {
 	MXC_SPI_CS(2),
 };
 
-static struct spi_imx_master spi0_pdata = {
+static const struct spi_imx_master spi0_pdata __initconst = {
 	.chipselect	= spi_internal_chipselect,
 	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
 };
@@ -201,9 +196,9 @@ void __init mx31lite_db_init(void)
 	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
 					ARRAY_SIZE(litekit_db_board_pins),
 					"development board pins");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	imx31_add_imx_uart0(&uart_pdata);
 	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
-	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
 	platform_device_register(&litekit_led_device);
 	mxc_register_device(&imx_wdt_device0, NULL);
 	mxc_register_device(&imx_rtc_device0, NULL);
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 582299cb2c08..fc395a7a8599 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/gpio.h>
@@ -27,13 +23,13 @@
 #include <linux/usb/otg.h>
 
 #include <mach/common.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
 #include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int devboard_pins[] = {
@@ -56,7 +52,7 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -230,7 +226,7 @@ void __init mx31moboard_devboard_init(void)
 	mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
 		"devboard");
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 4930f8c27e66..18069cb7d068 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -183,7 +179,6 @@ static struct soc_camera_link base_iclink = {
 	.reset		= marxbot_basecam_reset,
 	.board_info	= &marxbot_i2c_devices[0],
 	.i2c_adapter_id	= 0,
-	.module_name	= "mt9t031",
 };
 
 static struct platform_device marxbot_camera[] = {
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 293eea6d9d97..04760a53005a 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -10,10 +10,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/delay.h>
@@ -30,7 +26,6 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31moboard.h>
 #include <mach/mxc_ehci.h>
@@ -38,6 +33,7 @@
 
 #include <media/soc_camera.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int smartbot_pins[] = {
@@ -59,7 +55,7 @@ static unsigned int smartbot_pins[] = {
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -92,7 +88,6 @@ static struct soc_camera_link base_iclink = {
 	.reset		= smartbot_cam_reset,
 	.board_info	= &smartbot_i2c_devices[0],
 	.i2c_adapter_id	= 0,
-	.module_name	= "mt9t031",
 };
 
 static struct platform_device smartbot_camera[] = {
@@ -138,7 +133,7 @@ static struct mxc_usbh_platform_data otg_host_pdata = {
 static int __init smartbot_otg_host_init(void)
 {
 	otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
 	return mxc_register_device(&mxc_otg_host, &otg_host_pdata);
 }
@@ -183,8 +178,7 @@ void __init mx31moboard_smartbot_init(int board)
 	mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
 		"smartbot");
 
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-
+	imx31_add_imx_uart1(&uart_pdata);
 
 	switch (board) {
 	case MX31SMARTBOT:
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 1576d51e676c..3ec910a7a182 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -5,14 +5,85 @@ config ARCH_MX51
 	default y
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_HAS_CPUFREQ
 
 comment "MX5 platforms:"
 
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_ESDHC
 	help
 	  Include support for MX51 Babbage platform, also known as MX51EVK in
 	  u-boot. This includes specific configurations for the board and its
 	  peripherals.
 
+config MACH_MX51_3DS
+	bool "Support MX51PDK (3DS)"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
+	help
+	  Include support for MX51PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX51
+	bool "Support Eukrea CPUIMX51 module"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for Eukrea CPUIMX51 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51
+	default MACH_EUKREA_MBIMX51_BASEBOARD
+
+config MACH_EUKREA_MBIMX51_BASEBOARD
+	prompt "Eukrea MBIMX51 development board"
+	bool
+	select IMX_HAVE_PLATFORM_ESDHC
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX51 evaluation board.
+
+endchoice
+
+config MACH_EUKREA_CPUIMX51SD
+	bool "Support Eukrea CPUIMX51SD module"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	help
+	  Include support for Eukrea CPUIMX51SD platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51SD
+	default MACH_EUKREA_MBIMXSD51_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD51_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	bool
+	select IMX_HAVE_PLATFORM_ESDHC
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_MX51_EFIKAMX
+	bool "Support MX51 Genesi Efika MX nettop"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for Genesi Efika MX nettop. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index bf23f869ef51..462f177eddfe 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -5,5 +5,11 @@
 # Object file lists.
 obj-y   := cpu.o mm.o clock-mx51.o devices.o
 
+obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
-
+obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
new file mode 100644
index 000000000000..6a9792fd0a76
--- /dev/null
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -0,0 +1,300 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * based on board-mx51_babbage.c which is
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define CPUIMX51_USBH1_STP	(0*32 + 27)
+#define CPUIMX51_QUARTA_GPIO	(2*32 + 28)
+#define CPUIMX51_QUARTB_GPIO	(2*32 + 25)
+#define CPUIMX51_QUARTC_GPIO	(2*32 + 26)
+#define CPUIMX51_QUARTD_GPIO	(2*32 + 27)
+#define CPUIMX51_QUARTA_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO)
+#define CPUIMX51_QUARTB_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO)
+#define CPUIMX51_QUARTC_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO)
+#define CPUIMX51_QUARTD_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTD_GPIO)
+#define CPUIMX51_QUART_XTAL	14745600
+#define CPUIMX51_QUART_REGSHIFT	17
+
+/* USB_CTRL_1 */
+#define MX51_USB_CTRL_1_OFFSET		0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
+
+#define	MX51_USB_PLLDIV_12_MHZ		0x00
+#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
+#define	MX51_USB_PLL_DIV_24_MHZ		0x02
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
+		.irq = CPUIMX51_QUARTA_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
+		.irq = CPUIMX51_QUARTB_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
+		.irq = CPUIMX51_QUARTC_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
+		.irq = CPUIMX51_QUARTD_IRQ,
+		.irqflags = IRQF_TRIGGER_HIGH,
+		.uartclk = CPUIMX51_QUART_XTAL,
+		.regshift = CPUIMX51_QUART_REGSHIFT,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	&serial_device,
+#endif
+};
+
+static struct pad_desc eukrea_cpuimx51_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* I2C2 */
+	MX51_PAD_GPIO_1_2__I2C2_SCL,
+	MX51_PAD_GPIO_1_3__I2C2_SDA,
+	MX51_PAD_NANDF_D10__GPIO_3_30,
+
+	/* QUART IRQ */
+	MX51_PAD_NANDF_D15__GPIO_3_25,
+	MX51_PAD_NANDF_D14__GPIO_3_26,
+	MX51_PAD_NANDF_D13__GPIO_3_27,
+	MX51_PAD_NANDF_D12__GPIO_3_28,
+
+	/* USB HOST1 */
+	MX51_PAD_USBH1_CLK__USBH1_CLK,
+	MX51_PAD_USBH1_DIR__USBH1_DIR,
+	MX51_PAD_USBH1_NXT__USBH1_NXT,
+	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+	MX51_PAD_USBH1_STP__USBH1_STP,
+};
+
+static const struct mxc_nand_platform_data
+		eukrea_cpuimx51_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const
+struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+/* This function is board specific as the bit mask for the plldiv will also
+be different for other Freescale SoCs, thus a common bitmask is not
+possible and cannot get place in /plat-mxc/ehci.c.*/
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_19_2_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
+	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
+	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init		= initialize_otg_port,
+	.portsc	= MXC_EHCI_UTMI_16BIT,
+	.flags	= MXC_EHCI_INTERNAL_PHY,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
+static struct mxc_usbh_platform_data usbh1_config = {
+	.init		= initialize_usbh1_port,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx51_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
+
+/*
+ * Board specific initialization.
+ */
+static void __init eukrea_cpuimx51_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
+					ARRAY_SIZE(eukrea_cpuimx51_pads));
+
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
+
+	gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
+	gpio_direction_input(CPUIMX51_QUARTA_GPIO);
+	gpio_free(CPUIMX51_QUARTA_GPIO);
+	gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
+	gpio_direction_input(CPUIMX51_QUARTB_GPIO);
+	gpio_free(CPUIMX51_QUARTB_GPIO);
+	gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
+	gpio_direction_input(CPUIMX51_QUARTC_GPIO);
+	gpio_free(CPUIMX51_QUARTC_GPIO);
+	gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
+	gpio_direction_input(CPUIMX51_QUARTD_GPIO);
+	gpio_free(CPUIMX51_QUARTD_GPIO);
+
+	imx51_add_fec(NULL);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
+	i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
+
+	if (otg_mode_host)
+		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	else {
+		initialize_otg_port(NULL);
+		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+	}
+	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
+	eukrea_mbimx51_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx51_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= eukrea_cpuimx51_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
+	/* Maintainer: Eric Bénard <eric@eukrea.com> */
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = eukrea_cpuimx51_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
new file mode 100644
index 000000000000..4b3a6119c5fb
--- /dev/null
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -0,0 +1,331 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * based on board-mx51_babbage.c which is
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+#include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/can/platform/mcp251x.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define USBH1_RST		(1*32 + 28)
+#define ETH_RST			(1*32 + 31)
+#define TSC2007_IRQGPIO		(2*32 + 12)
+#define CAN_IRQGPIO		(0*32 + 1)
+#define CAN_RST			(3*32 + 15)
+#define CAN_NCS			(3*32 + 24)
+#define CAN_RXOBF		(0*32 + 4)
+#define CAN_RX1BF		(0*32 + 6)
+#define CAN_TXORTS		(0*32 + 7)
+#define CAN_TX1RTS		(0*32 + 8)
+#define CAN_TX2RTS		(0*32 + 9)
+#define I2C_SCL			(3*32 + 16)
+#define I2C_SDA			(3*32 + 17)
+
+/* USB_CTRL_1 */
+#define MX51_USB_CTRL_1_OFFSET		0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
+
+#define	MX51_USB_PLLDIV_12_MHZ		0x00
+#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
+#define	MX51_USB_PLL_DIV_24_MHZ		0x02
+
+#define CPUIMX51SD_GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, \
+				MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
+
+static struct pad_desc eukrea_cpuimx51sd_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* USB HOST1 */
+	MX51_PAD_USBH1_CLK__USBH1_CLK,
+	MX51_PAD_USBH1_DIR__USBH1_DIR,
+	MX51_PAD_USBH1_NXT__USBH1_NXT,
+	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+	MX51_PAD_USBH1_STP__USBH1_STP,
+	MX51_PAD_EIM_CS3__GPIO_2_28,		/* PHY nRESET */
+
+	/* FEC */
+	MX51_PAD_EIM_DTACK__GPIO_2_31,		/* PHY nRESET */
+
+	/* HSI2C */
+	MX51_PAD_I2C1_CLK__GPIO_4_16,
+	MX51_PAD_I2C1_DAT__GPIO_4_17,
+
+	/* CAN */
+	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
+	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
+	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+	MX51_PAD_CSPI1_SS0__GPIO_4_24,		/* nCS */
+	MX51_PAD_CSI2_PIXCLK__GPIO_4_15,	/* nReset */
+	MX51_PAD_GPIO_1_1__GPIO_1_1,		/* IRQ */
+	MX51_PAD_GPIO_1_4__GPIO_1_4,		/* Control signals */
+	MX51_PAD_GPIO_1_6__GPIO_1_6,
+	MX51_PAD_GPIO_1_7__GPIO_1_7,
+	MX51_PAD_GPIO_1_8__GPIO_1_8,
+	MX51_PAD_GPIO_1_9__GPIO_1_9,
+
+	/* Touchscreen */
+	CPUIMX51SD_GPIO_3_12,			/* IRQ */
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int ts_get_pendown_state(void)
+{
+	return gpio_get_value(TSC2007_IRQGPIO) ? 0 : 1;
+}
+
+static struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+};
+
+static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
+		I2C_BOARD_INFO("tsc2007", 0x49),
+		.type		= "tsc2007",
+		.platform_data	= &tsc2007_info,
+		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+	},
+};
+
+static const struct mxc_nand_platform_data
+		eukrea_cpuimx51sd_nand_board_info __initconst = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+/* This function is board specific as the bit mask for the plldiv will also
+be different for other Freescale SoCs, thus a common bitmask is not
+possible and cannot get place in /plat-mxc/ehci.c.*/
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_19_2_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* The clock for the USBH1 ULPI port will come from the PHY. */
+	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
+	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
+			usbother_base + MX51_USB_CTRL_1_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init		= initialize_otg_port,
+	.portsc	= MXC_EHCI_UTMI_16BIT,
+	.flags	= MXC_EHCI_INTERNAL_PHY,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
+static struct mxc_usbh_platform_data usbh1_config = {
+	.init		= initialize_usbh1_port,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx51sd_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
+
+static struct i2c_gpio_platform_data pdata = {
+	.sda_pin		= I2C_SDA,
+	.sda_is_open_drain	= 0,
+	.scl_pin		= I2C_SCL,
+	.scl_is_open_drain	= 0,
+	.udelay			= 2,
+};
+
+static struct platform_device hsi2c_gpio_device = {
+	.name			= "i2c-gpio",
+	.id			= 0,
+	.dev.platform_data	= &pdata,
+};
+
+static struct mcp251x_platform_data mcp251x_info = {
+	.oscillator_frequency = 24E6,
+};
+
+static struct spi_board_info cpuimx51sd_spi_device[] = {
+	{
+		.modalias        = "mcp2515",
+		.max_speed_hz    = 6500000,
+		.bus_num         = 0,
+		.mode		= SPI_MODE_0,
+		.chip_select     = 0,
+		.platform_data   = &mcp251x_info,
+		.irq             = gpio_to_irq(0 * 32 + 1)
+	},
+};
+
+static int cpuimx51sd_spi1_cs[] = {
+	CAN_NCS,
+};
+
+static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
+	.chipselect	= cpuimx51sd_spi1_cs,
+	.num_chipselect	= ARRAY_SIZE(cpuimx51sd_spi1_cs),
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&hsi2c_gpio_device,
+};
+
+static void __init eukrea_cpuimx51sd_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
+					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
+
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
+
+	gpio_request(ETH_RST, "eth_rst");
+	gpio_set_value(ETH_RST, 1);
+	imx51_add_fec(NULL);
+
+	gpio_request(CAN_IRQGPIO, "can_irq");
+	gpio_direction_input(CAN_IRQGPIO);
+	gpio_free(CAN_IRQGPIO);
+	gpio_request(CAN_NCS, "can_ncs");
+	gpio_direction_output(CAN_NCS, 1);
+	gpio_free(CAN_NCS);
+	gpio_request(CAN_RST, "can_rst");
+	gpio_direction_output(CAN_RST, 0);
+	msleep(20);
+	gpio_set_value(CAN_RST, 1);
+	imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
+	spi_register_board_info(cpuimx51sd_spi_device,
+				ARRAY_SIZE(cpuimx51sd_spi_device));
+
+	gpio_request(TSC2007_IRQGPIO, "tsc2007_irq");
+	gpio_direction_input(TSC2007_IRQGPIO);
+	gpio_free(TSC2007_IRQGPIO);
+
+	i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
+			ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+	if (otg_mode_host)
+		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	else {
+		initialize_otg_port(NULL);
+		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+	}
+
+	gpio_request(USBH1_RST, "usb_rst");
+	gpio_direction_output(USBH1_RST, 0);
+	msleep(20);
+	gpio_set_value(USBH1_RST, 1);
+	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
+	eukrea_mbimxsd51_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx51sd_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= eukrea_cpuimx51sd_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
+	/* Maintainer: Eric Bénard <eric@eukrea.com> */
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = eukrea_cpuimx51sd_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
new file mode 100644
index 000000000000..79ce8dcf3cda
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx51.h>
+#include <mach/3ds_debugboard.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
+#define MX51_3DS_ECSPI2_CS	(GPIO_PORTC + 28)
+
+static struct pad_desc mx51_3ds_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+	MX51_PAD_EIM_D25__UART2_CTS,
+	MX51_PAD_EIM_D26__UART2_RTS,
+
+	/* UART3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_EIM_D24__UART3_CTS,
+	MX51_PAD_EIM_D27__UART3_RTS,
+
+	/* CPLD PARENT IRQ PIN */
+	MX51_PAD_GPIO_1_6__GPIO_1_6,
+
+	/* KPP */
+	MX51_PAD_KEY_ROW0__KEY_ROW0,
+	MX51_PAD_KEY_ROW1__KEY_ROW1,
+	MX51_PAD_KEY_ROW2__KEY_ROW2,
+	MX51_PAD_KEY_ROW3__KEY_ROW3,
+	MX51_PAD_KEY_COL0__KEY_COL0,
+	MX51_PAD_KEY_COL1__KEY_COL1,
+	MX51_PAD_KEY_COL2__KEY_COL2,
+	MX51_PAD_KEY_COL3__KEY_COL3,
+	MX51_PAD_KEY_COL4__KEY_COL4,
+	MX51_PAD_KEY_COL5__KEY_COL5,
+
+	/* eCSPI2 */
+	MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
+	MX51_PAD_NANDF_RB3__ECSPI2_MISO,
+	MX51_PAD_NANDF_D15__ECSPI2_MOSI,
+	MX51_PAD_NANDF_D12__GPIO_3_28,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+#if defined(CONFIG_KEYBOARD_IMX) || defined(CONFIG_KEYBOARD_IMX_MODULE)
+static int mx51_3ds_board_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(0, 1, KEY_2),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_F1),
+	KEY(0, 4, KEY_UP),
+	KEY(0, 5, KEY_F2),
+
+	KEY(1, 0, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_LEFT),
+	KEY(1, 4, KEY_SELECT),
+	KEY(1, 5, KEY_RIGHT),
+
+	KEY(2, 0, KEY_7),
+	KEY(2, 1, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(2, 3, KEY_F3),
+	KEY(2, 4, KEY_DOWN),
+	KEY(2, 5, KEY_F4),
+
+	KEY(3, 0, KEY_0),
+	KEY(3, 1, KEY_OK),
+	KEY(3, 2, KEY_ESC),
+	KEY(3, 3, KEY_ENTER),
+	KEY(3, 4, KEY_MENU),
+	KEY(3, 5, KEY_BACK)
+};
+
+static struct matrix_keymap_data mx51_3ds_map_data = {
+	.keymap		= mx51_3ds_board_keymap,
+	.keymap_size	= ARRAY_SIZE(mx51_3ds_board_keymap),
+};
+
+static void mxc_init_keypad(void)
+{
+	mxc_register_device(&mxc_keypad_device, &mx51_3ds_map_data);
+}
+#else
+static inline void mxc_init_keypad(void)
+{
+}
+#endif
+
+static int mx51_3ds_spi2_cs[] = {
+	MXC_SPI_CS(0),
+	MX51_3DS_ECSPI2_CS,
+};
+
+static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
+	.chipselect	= mx51_3ds_spi2_cs,
+	.num_chipselect	= ARRAY_SIZE(mx51_3ds_spi2_cs),
+};
+
+static struct spi_board_info mx51_3ds_spi_nor_device[] = {
+	{
+	 .modalias = "m25p80",
+	 .max_speed_hz = 25000000,	/* max spi clock (SCK) speed in HZ */
+	 .bus_num = 1,
+	 .chip_select = 1,
+	 .mode = SPI_MODE_0,
+	 .platform_data = NULL,},
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
+					ARRAY_SIZE(mx51_3ds_pads));
+	mxc_init_imx_uart();
+
+	imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
+	spi_register_board_info(mx51_3ds_spi_nor_device,
+				ARRAY_SIZE(mx51_3ds_spi_nor_device));
+
+	if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		printk(KERN_WARNING "Init of the debugboard failed, all "
+				    "devices on the board are unusable.\n");
+
+	mxc_init_keypad();
+}
+
+static void __init mx51_3ds_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= mx51_3ds_timer_init,
+};
+
+MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine = mxc_board_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index ed885f9d7b73..acbe30df2e69 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
  *
  * The code contained herein is licensed under the GNU General Public
@@ -12,14 +12,17 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/i2c.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/fsl_devices.h>
+#include <linux/fec.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/imx-uart.h>
 #include <mach/iomux-mx51.h>
 #include <mach/mxc_ehci.h>
 
@@ -29,11 +32,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
+#include "devices-imx51.h"
 #include "devices.h"
+#include "cpu_op-mx51.h"
 
 #define BABBAGE_USB_HUB_RESET	(0*32 + 7)	/* GPIO_1_7 */
 #define BABBAGE_USBH1_STP	(0*32 + 27)	/* GPIO_1_27 */
-#define BABBAGE_PHY_RESET (1*32 +5)	/* GPIO_2_5 */
+#define BABBAGE_PHY_RESET	(1*32 + 5)	/* GPIO_2_5 */
+#define BABBAGE_FEC_PHY_RESET	(1*32 + 14)	/* GPIO_2_14 */
+#define BABBAGE_POWER_KEY	(1*32 + 21)	/* GPIO_2_21 */
 
 /* USB_CTRL_1 */
 #define MX51_USB_CTRL_1_OFFSET			0x10
@@ -43,8 +50,19 @@
 #define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
 #define	MX51_USB_PLL_DIV_24_MHZ	0x02
 
-static struct platform_device *devices[] __initdata = {
-	&mxc_fec_device,
+static struct gpio_keys_button babbage_buttons[] = {
+	{
+		.gpio		= BABBAGE_POWER_KEY,
+		.code		= BTN_0,
+		.desc		= "PWR",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static const struct gpio_keys_platform_data imx_button_data __initconst = {
+	.buttons	= babbage_buttons,
+	.nbuttons	= ARRAY_SIZE(babbage_buttons),
 };
 
 static struct pad_desc mx51babbage_pads[] = {
@@ -64,6 +82,18 @@ static struct pad_desc mx51babbage_pads[] = {
 	MX51_PAD_EIM_D27__UART3_RTS,
 	MX51_PAD_EIM_D24__UART3_CTS,
 
+	/* I2C1 */
+	MX51_PAD_EIM_D16__I2C1_SDA,
+	MX51_PAD_EIM_D19__I2C1_SCL,
+
+	/* I2C2 */
+	MX51_PAD_KEY_COL4__I2C2_SCL,
+	MX51_PAD_KEY_COL5__I2C2_SDA,
+
+	/* HSI2C */
+	MX51_PAD_I2C1_CLK__HSI2C_CLK,
+	MX51_PAD_I2C1_DAT__HSI2C_DAT,
+
 	/* USB HOST1 */
 	MX51_PAD_USBH1_CLK__USBH1_CLK,
 	MX51_PAD_USBH1_DIR__USBH1_DIR,
@@ -78,20 +108,58 @@ static struct pad_desc mx51babbage_pads[] = {
 	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
 
 	/* USB HUB reset line*/
-	MX51_PAD_GPIO_1_7__GPIO1_7,
+	MX51_PAD_GPIO_1_7__GPIO_1_7,
+
+	/* FEC */
+	MX51_PAD_EIM_EB2__FEC_MDIO,
+	MX51_PAD_EIM_EB3__FEC_RDAT1,
+	MX51_PAD_EIM_CS2__FEC_RDAT2,
+	MX51_PAD_EIM_CS3__FEC_RDAT3,
+	MX51_PAD_EIM_CS4__FEC_RX_ER,
+	MX51_PAD_EIM_CS5__FEC_CRS,
+	MX51_PAD_NANDF_RB2__FEC_COL,
+	MX51_PAD_NANDF_RB3__FEC_RXCLK,
+	MX51_PAD_NANDF_RB6__FEC_RDAT0,
+	MX51_PAD_NANDF_RB7__FEC_TDAT0,
+	MX51_PAD_NANDF_CS2__FEC_TX_ER,
+	MX51_PAD_NANDF_CS3__FEC_MDC,
+	MX51_PAD_NANDF_CS4__FEC_TDAT1,
+	MX51_PAD_NANDF_CS5__FEC_TDAT2,
+	MX51_PAD_NANDF_CS6__FEC_TDAT3,
+	MX51_PAD_NANDF_CS7__FEC_TX_EN,
+	MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
+
+	/* FEC PHY reset line */
+	MX51_PAD_EIM_A20__GPIO_2_14,
+
+	/* SD 1 */
+	MX51_PAD_SD1_CMD__SD1_CMD,
+	MX51_PAD_SD1_CLK__SD1_CLK,
+	MX51_PAD_SD1_DATA0__SD1_DATA0,
+	MX51_PAD_SD1_DATA1__SD1_DATA1,
+	MX51_PAD_SD1_DATA2__SD1_DATA2,
+	MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+	/* SD 2 */
+	MX51_PAD_SD2_CMD__SD2_CMD,
+	MX51_PAD_SD2_CLK__SD2_CLK,
+	MX51_PAD_SD2_DATA0__SD2_DATA0,
+	MX51_PAD_SD2_DATA1__SD2_DATA1,
+	MX51_PAD_SD2_DATA2__SD2_DATA2,
+	MX51_PAD_SD2_DATA3__SD2_DATA3,
 };
 
 /* Serial ports */
 #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
-static struct imxuart_platform_data uart_pdata = {
+static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
 static inline void mxc_init_imx_uart(void)
 {
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata);
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(2, &uart_pdata);
 }
 #else /* !SERIAL_IMX */
 static inline void mxc_init_imx_uart(void)
@@ -99,6 +167,14 @@ static inline void mxc_init_imx_uart(void)
 }
 #endif /* SERIAL_IMX */
 
+static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct imxi2c_platform_data babbage_hsi2c_data = {
+	.bitrate = 400000,
+};
+
 static int gpio_usbh1_active(void)
 {
 	struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
@@ -149,6 +225,22 @@ static inline void babbage_usbhub_reset(void)
 	gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
 }
 
+static inline void babbage_fec_reset(void)
+{
+	int ret;
+
+	/* reset FEC PHY */
+	ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset");
+	if (ret) {
+		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
+		return;
+	}
+	gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0);
+	gpio_set_value(BABBAGE_FEC_PHY_RESET, 0);
+	msleep(1);
+	gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
+}
+
 /* This function is board specific as the bit mask for the plldiv will also
 be different for other Freescale SoCs, thus a common bitmask is not
 possible and cannot get place in /plat-mxc/ehci.c.*/
@@ -156,7 +248,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 {
 	u32 v;
 	void __iomem *usb_base;
-	u32 usbother_base;
+	void __iomem *usbother_base;
 
 	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -174,7 +266,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 {
 	u32 v;
 	void __iomem *usb_base;
-	u32 usbother_base;
+	void __iomem *usbother_base;
 
 	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -224,11 +316,25 @@ __setup("otg_mode=", babbage_otg_mode);
 static void __init mxc_board_init(void)
 {
 	struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
+	struct pad_desc power_key = MX51_PAD_EIM_A27__GPIO_2_21;
 
+#if defined(CONFIG_CPU_FREQ_IMX)
+	get_cpu_op = mx51_get_cpu_op;
+#endif
 	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
 					ARRAY_SIZE(mx51babbage_pads));
 	mxc_init_imx_uart();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	babbage_fec_reset();
+	imx51_add_fec(NULL);
+
+	/* Set the PAD settings for the pwr key. */
+	power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2;
+	mxc_iomux_v3_setup_pad(&power_key);
+	imx51_add_gpio_keys(&imx_button_data);
+
+	imx51_add_imx_i2c(0, &babbage_i2c_data);
+	imx51_add_imx_i2c(1, &babbage_i2c_data);
+	mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
 
 	if (otg_mode_host)
 		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
@@ -242,6 +348,9 @@ static void __init mxc_board_init(void)
 	/* setback USBH1_STP to be function */
 	mxc_iomux_v3_setup_pad(&usbh1stp);
 	babbage_usbhub_reset();
+
+	imx51_add_esdhc(0, NULL);
+	imx51_add_esdhc(1, NULL);
 }
 
 static void __init mx51_babbage_timer_init(void)
@@ -255,9 +364,7 @@ static struct sys_timer mxc_timer = {
 
 MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
-	.phys_io = MX51_AIPS1_BASE_ADDR,
-	.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params = PHYS_OFFSET + 0x100,
+	.boot_params = MX51_PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
 	.init_irq = mx51_init_irq,
 	.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
new file mode 100644
index 000000000000..6e623bda3ee7
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2010 Linaro Limited
+ *
+ * based on code from the following
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
+ * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx51.h>
+#include <mach/i2c.h>
+#include <mach/mxc_ehci.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define	MX51_USB_PLL_DIV_24_MHZ	0x01
+
+static struct pad_desc mx51efikamx_pads[] = {
+	/* UART1 */
+	MX51_PAD_UART1_RXD__UART1_RXD,
+	MX51_PAD_UART1_TXD__UART1_TXD,
+	MX51_PAD_UART1_RTS__UART1_RTS,
+	MX51_PAD_UART1_CTS__UART1_CTS,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static const struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	imx51_add_imx_uart(0, &uart_pdata);
+	imx51_add_imx_uart(1, &uart_pdata);
+	imx51_add_imx_uart(2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+/* This function is board specific as the bit mask for the plldiv will also
+ * be different for other Freescale SoCs, thus a common bitmask is not
+ * possible and cannot get place in /plat-mxc/ehci.c.
+ */
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	void __iomem *usbother_base;
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_24_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init   = initialize_otg_port,
+	.portsc = MXC_EHCI_UTMI_16BIT,
+	.flags  = MXC_EHCI_INTERNAL_PHY,
+};
+
+static void __init mxc_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
+					ARRAY_SIZE(mx51efikamx_pads));
+	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	mxc_init_imx_uart();
+}
+
+static void __init mx51_efikamx_timer_init(void)
+{
+	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
+}
+
+static struct sys_timer mxc_timer = {
+	.init	= mx51_efikamx_timer_init,
+};
+
+MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
+	/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
+	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.map_io = mx51_map_io,
+	.init_irq = mx51_init_irq,
+	.init_machine =  mxc_board_init,
+	.timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index d9f612d3370e..8ac36d882927 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -41,34 +41,66 @@ static struct clk usboh3_clk;
 
 #define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
 
-static int _clk_ccgr_enable(struct clk *clk)
+/* calculate best pre and post dividers to get the required divider */
+static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post,
+	u32 max_pre, u32 max_post)
 {
-	u32 reg;
+	if (div >= max_pre * max_post) {
+		*pre = max_pre;
+		*post = max_post;
+	} else if (div >= max_pre) {
+		u32 min_pre, temp_pre, old_err, err;
+		min_pre = DIV_ROUND_UP(div, max_post);
+		old_err = max_pre;
+		for (temp_pre = max_pre; temp_pre >= min_pre; temp_pre--) {
+			err = div % temp_pre;
+			if (err == 0) {
+				*pre = temp_pre;
+				break;
+			}
+			err = temp_pre - err;
+			if (err < old_err) {
+				old_err = err;
+				*pre = temp_pre;
+			}
+		}
+		*post = DIV_ROUND_UP(div, *pre);
+	} else {
+		*pre = div;
+		*post = 1;
+	}
+}
+
+static void _clk_ccgr_setclk(struct clk *clk, unsigned mode)
+{
+	u32 reg = __raw_readl(clk->enable_reg);
+
+	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+	reg |= mode << clk->enable_shift;
 
-	reg = __raw_readl(clk->enable_reg);
-	reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
 	__raw_writel(reg, clk->enable_reg);
+}
 
+static int _clk_ccgr_enable(struct clk *clk)
+{
+	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON);
 	return 0;
 }
 
 static void _clk_ccgr_disable(struct clk *clk)
 {
-	u32 reg;
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
+	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF);
+}
 
+static int _clk_ccgr_enable_inrun(struct clk *clk)
+{
+	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
+	return 0;
 }
 
 static void _clk_ccgr_disable_inwait(struct clk *clk)
 {
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
-	reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
+	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
 }
 
 /*
@@ -330,7 +362,7 @@ static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
-static unsigned long clk_arm_get_rate(struct clk *clk)
+static unsigned long clk_cpu_get_rate(struct clk *clk)
 {
 	u32 cacrr, div;
 	unsigned long parent_rate;
@@ -342,6 +374,22 @@ static unsigned long clk_arm_get_rate(struct clk *clk)
 	return parent_rate / div;
 }
 
+static int clk_cpu_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, cpu_podf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+	cpu_podf = parent_rate / rate - 1;
+	/* use post divider to change freq */
+	reg = __raw_readl(MXC_CCM_CACRR);
+	reg &= ~MXC_CCM_CACRR_ARM_PODF_MASK;
+	reg |= cpu_podf << MXC_CCM_CACRR_ARM_PODF_OFFSET;
+	__raw_writel(reg, MXC_CCM_CACRR);
+
+	return 0;
+}
+
 static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
 {
 	u32 reg, mux;
@@ -542,60 +590,60 @@ static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
-static unsigned long clk_uart_get_rate(struct clk *clk)
-{
-	u32 reg, prediv, podf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
+#define clk_nfc_set_parent	NULL
 
-	reg = __raw_readl(MXC_CCM_CSCDR1);
-	prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >>
-		  MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1;
-	podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >>
-		MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1;
+static unsigned long clk_nfc_get_rate(struct clk *clk)
+{
+	unsigned long rate;
+	u32 reg, div;
 
-	return parent_rate / (prediv * podf);
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >>
+	       MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1;
+	rate = clk_get_rate(clk->parent) / div;
+	WARN_ON(rate == 0);
+	return rate;
 }
 
-static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
+static unsigned long clk_nfc_round_rate(struct clk *clk,
+						unsigned long rate)
 {
-	u32 reg, mux;
+	u32 div;
+	unsigned long parent_rate = clk_get_rate(clk->parent);
 
-	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
-		       &lp_apm_clk);
-	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK;
-	reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
+	if (!rate)
+		return -EINVAL;
 
-	return 0;
-}
+	div = parent_rate / rate;
 
-static unsigned long clk_usboh3_get_rate(struct clk *clk)
-{
-	u32 reg, prediv, podf;
-	unsigned long parent_rate;
+	if (parent_rate % rate)
+		div++;
 
-	parent_rate = clk_get_rate(clk->parent);
+	if (div > 8)
+		return -EINVAL;
 
-	reg = __raw_readl(MXC_CCM_CSCDR1);
-	prediv = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK) >>
-		  MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET) + 1;
-	podf = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK) >>
-		MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET) + 1;
+	return parent_rate / div;
 
-	return parent_rate / (prediv * podf);
 }
 
-static int _clk_usboh3_set_parent(struct clk *clk, struct clk *parent)
+static int clk_nfc_set_rate(struct clk *clk, unsigned long rate)
 {
-	u32 reg, mux;
+	u32 reg, div;
+
+	div = clk_get_rate(clk->parent) / rate;
+	if (div == 0)
+		div++;
+	if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8))
+		return -EINVAL;
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK;
+	reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET;
+	__raw_writel(reg, MXC_CCM_CBCDR);
 
-	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
-		       &lp_apm_clk);
-	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK;
-	reg |= mux << MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
+	while (__raw_readl(MXC_CCM_CDHIPR) &
+			MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){
+	}
 
 	return 0;
 }
@@ -620,6 +668,17 @@ static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
 	return ckih2_reference;
 }
 
+static unsigned long clk_emi_slow_get_rate(struct clk *clk)
+{
+	u32 reg, div;
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >>
+	       MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1;
+
+	return clk_get_rate(clk->parent) / div;
+}
+
 /* External high frequency clock */
 static struct clk ckih_clk = {
 	.get_rate = get_high_reference_clock_rate,
@@ -693,7 +752,8 @@ static struct clk periph_apm_clk = {
 
 static struct clk cpu_clk = {
 	.parent = &pll1_sw_clk,
-	.get_rate = clk_arm_get_rate,
+	.get_rate = clk_cpu_get_rate,
+	.set_rate = clk_cpu_set_rate,
 };
 
 static struct clk ahb_clk = {
@@ -715,18 +775,6 @@ static struct clk ipg_perclk = {
 	.set_parent = _clk_ipg_per_set_parent,
 };
 
-static struct clk uart_root_clk = {
-	.parent = &pll2_sw_clk,
-	.get_rate = clk_uart_get_rate,
-	.set_parent = _clk_uart_set_parent,
-};
-
-static struct clk usboh3_clk = {
-	.parent = &pll2_sw_clk,
-	.get_rate = clk_usboh3_get_rate,
-	.set_parent = _clk_usboh3_set_parent,
-};
-
 static struct clk ahb_max_clk = {
 	.parent = &ahb_clk,
 	.enable_reg = MXC_CCM_CCGR0,
@@ -758,50 +806,246 @@ static struct clk gpt_32k_clk = {
 	.parent = &ckil_clk,
 };
 
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)	\
+static struct clk kpp_clk = {
+	.id = 0,
+};
+
+static struct clk emi_slow_clk = {
+	.parent = &pll2_sw_clk,
+	.enable_reg = MXC_CCM_CCGR5,
+	.enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable_inwait,
+	.get_rate = clk_emi_slow_get_rate,
+};
+
+#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
 		.enable_reg	= er,			\
 		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.set_rate	= sr,			\
+		.get_rate	= pfx##_get_rate,	\
+		.set_rate	= pfx##_set_rate,	\
+		.round_rate	= pfx##_round_rate,	\
+		.set_parent	= pfx##_set_parent,	\
 		.enable		= _clk_ccgr_enable,	\
 		.disable	= _clk_ccgr_disable,	\
 		.parent		= p,			\
 		.secondary	= s,			\
 	}
 
-/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
-   get_rate, set_rate, parent, secondary); */
+#define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s)	\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= er,			\
+		.enable_shift	= es,			\
+		.get_rate	= pfx##_get_rate,	\
+		.set_rate	= pfx##_set_rate,	\
+		.set_parent	= pfx##_set_parent,	\
+		.enable		= _clk_max_enable,	\
+		.disable	= _clk_max_disable,	\
+		.parent		= p,			\
+		.secondary	= s,			\
+	}
+
+#define CLK_GET_RATE(name, nr, bitsname)				\
+static unsigned long clk_##name##_get_rate(struct clk *clk)		\
+{									\
+	u32 reg, pred, podf;						\
+									\
+	reg = __raw_readl(MXC_CCM_CSCDR##nr);				\
+	pred = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK)	\
+		>> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET;	\
+	podf = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK)	\
+		>> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET;	\
+									\
+	return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent),		\
+			(pred + 1) * (podf + 1));			\
+}
+
+#define CLK_SET_PARENT(name, nr, bitsname)				\
+static int clk_##name##_set_parent(struct clk *clk, struct clk *parent)	\
+{									\
+	u32 reg, mux;							\
+									\
+	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk,		\
+			&pll3_sw_clk, &lp_apm_clk);			\
+	reg = __raw_readl(MXC_CCM_CSCMR##nr) &				\
+		~MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_MASK;		\
+	reg |= mux << MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_OFFSET;	\
+	__raw_writel(reg, MXC_CCM_CSCMR##nr);				\
+									\
+	return 0;							\
+}
+
+#define CLK_SET_RATE(name, nr, bitsname)				\
+static int clk_##name##_set_rate(struct clk *clk, unsigned long rate)	\
+{									\
+	u32 reg, div, parent_rate;					\
+	u32 pre = 0, post = 0;						\
+									\
+	parent_rate = clk_get_rate(clk->parent);			\
+	div = parent_rate / rate;					\
+									\
+	if ((parent_rate / div) != rate)				\
+		return -EINVAL;						\
+									\
+	__calc_pre_post_dividers(div, &pre, &post,			\
+		(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK >>	\
+		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET) + 1,	\
+		(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK >>	\
+		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET) + 1);\
+									\
+	/* Set sdhc1 clock divider */					\
+	reg = __raw_readl(MXC_CCM_CSCDR##nr) &				\
+		~(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK	\
+		| MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK);	\
+	reg |= (post - 1) <<						\
+		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET;	\
+	reg |= (pre - 1) <<						\
+		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET;	\
+	__raw_writel(reg, MXC_CCM_CSCDR##nr);				\
+									\
+	return 0;							\
+}
+
+/* UART */
+CLK_GET_RATE(uart, 1, UART)
+CLK_SET_PARENT(uart, 1, UART)
+
+static struct clk uart_root_clk = {
+	.parent = &pll2_sw_clk,
+	.get_rate = clk_uart_get_rate,
+	.set_parent = clk_uart_set_parent,
+};
+
+/* USBOH3 */
+CLK_GET_RATE(usboh3, 1, USBOH3)
+CLK_SET_PARENT(usboh3, 1, USBOH3)
+
+static struct clk usboh3_clk = {
+	.parent = &pll2_sw_clk,
+	.get_rate = clk_usboh3_get_rate,
+	.set_parent = clk_usboh3_set_parent,
+};
+
+/* eCSPI */
+CLK_GET_RATE(ecspi, 2, CSPI)
+CLK_SET_PARENT(ecspi, 1, CSPI)
+
+static struct clk ecspi_main_clk = {
+	.parent = &pll3_sw_clk,
+	.get_rate = clk_ecspi_get_rate,
+	.set_parent = clk_ecspi_set_parent,
+};
+
+/* eSDHC */
+CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1)
+CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1)
+CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1)
+
+CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2)
+CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2)
+CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2)
+
+#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s)		\
+	static struct clk name = {					\
+		.id		= i,					\
+		.enable_reg	= er,					\
+		.enable_shift	= es,					\
+		.get_rate	= gr,					\
+		.set_rate	= sr,					\
+		.enable		= e,					\
+		.disable	= d,					\
+		.parent		= p,					\
+		.secondary	= s,					\
+	}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)			\
+	DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s)
 
 /* Shared peripheral bus arbiter */
 DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
 
 /* UART */
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
-	NULL,  NULL, &uart_root_clk, NULL);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL,  NULL, &uart_root_clk, NULL);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL,  NULL, &uart_root_clk, NULL);
 DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
 	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
 DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
 	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
 DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
 	NULL,  NULL, &ipg_clk, &spba_clk);
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
+	NULL,  NULL, &uart_root_clk, &uart1_ipg_clk);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
+	NULL,  NULL, &uart_root_clk, &uart2_ipg_clk);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
+	NULL,  NULL, &uart_root_clk, &uart3_ipg_clk);
 
 /* GPT */
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL,  NULL, &ipg_clk, NULL);
 DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
+	NULL,  NULL, &ipg_clk, &gpt_ipg_clk);
+
+/* I2C */
+DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
 
 /* FEC */
 DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
 	NULL,  NULL, &ipg_clk, NULL);
 
+/* NFC */
+DEFINE_CLOCK_CCGR(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET,
+	clk_nfc, &emi_slow_clk, NULL);
+
+/* SSI */
+DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET,
+	NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk);
+DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
+	NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
+
+/* eCSPI */
+DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
+		NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
+		&ipg_clk, &spba_clk);
+DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET,
+		NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk);
+DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET,
+		NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
+		&ipg_clk, &aips_tz2_clk);
+DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET,
+		NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk);
+
+/* CSPI */
+DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
+		NULL, NULL, &ipg_clk, &aips_tz2_clk);
+DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET,
+		NULL, NULL, &ipg_clk, &cspi_ipg_clk);
+
+/* SDMA */
+DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET,
+		NULL, NULL, &ahb_clk, NULL);
+
+/* eSDHC */
+DEFINE_CLOCK_FULL(esdhc1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG0_OFFSET,
+	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
+DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET,
+	clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk);
+DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
+	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
+DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
+	clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
+
 #define _REGISTER_CLOCK(d, n, c) \
        { \
 		.dev_id = d, \
@@ -815,12 +1059,29 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
+	_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
+	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
+	_REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
+	_REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk)
+	_REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
+	_REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
+	_REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
 };
 
 static void clk_tree_init(void)
@@ -864,6 +1125,14 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 	/* set the usboh3_clk parent to pll2_sw_clk */
 	clk_set_parent(&usboh3_clk, &pll2_sw_clk);
 
+	/* Set SDHC parents to be PLL2 */
+	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
+	clk_set_parent(&esdhc2_clk, &pll2_sw_clk);
+
+	/* set SDHC root clock as 166.25MHZ*/
+	clk_set_rate(&esdhc1_clk, 166250000);
+	clk_set_rate(&esdhc2_clk, 166250000);
+
 	/* System timer */
 	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
 		MX51_MXC_INT_GPT);
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 2d37785e3857..eaacb6e9b5d0 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -70,6 +70,25 @@ int mx51_revision(void)
 }
 EXPORT_SYMBOL(mx51_revision);
 
+#ifdef CONFIG_NEON
+
+/*
+ * All versions of the silicon before Rev. 3 have broken NEON implementations.
+ * Dependent on link order - so the assumption is that vfp_init is called
+ * before us.
+ */
+static int __init mx51_neon_fixup(void)
+{
+	if (mx51_revision() < MX51_CHIP_REV_3_0 && (elf_hwcap & HWCAP_NEON)) {
+		elf_hwcap &= ~HWCAP_NEON;
+		pr_info("Turning off NEON support, detected broken NEON implementation\n");
+	}
+	return 0;
+}
+
+late_initcall(mx51_neon_fixup);
+#endif
+
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-mx5/cpu_op-mx51.c
new file mode 100644
index 000000000000..9d34c3d4c024
--- /dev/null
+++ b/arch/arm/mach-mx5/cpu_op-mx51.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/types.h>
+#include <mach/hardware.h>
+#include <linux/kernel.h>
+
+static struct cpu_op mx51_cpu_op[] = {
+	{
+	.cpu_rate = 160000000,},
+	{
+	.cpu_rate = 800000000,},
+};
+
+struct cpu_op *mx51_get_cpu_op(int *op)
+{
+	*op = ARRAY_SIZE(mx51_cpu_op);
+	return mx51_cpu_op;
+}
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-mx5/cpu_op-mx51.h
new file mode 100644
index 000000000000..97477fecb469
--- /dev/null
+++ b/arch/arm/mach-mx5/cpu_op-mx51.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+extern struct cpu_op *mx51_get_cpu_op(int *op);
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
new file mode 100644
index 000000000000..8c50cb5d05f5
--- /dev/null
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx51.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fec_data imx51_fec_data __initconst;
+#define imx51_add_fec(pdata)	\
+	imx_add_fec(&imx51_fec_data, pdata)
+
+#define imx51_add_gpio_keys(pdata) imx_add_gpio_keys(pdata)
+
+extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst;
+#define imx51_add_imx_i2c(id, pdata)	\
+	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
+
+extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst;
+#define imx51_add_imx_ssi(id, pdata)	\
+	imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst;
+#define imx51_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
+
+extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst;
+#define imx51_add_mxc_nand(pdata)	\
+	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx51_cspi_data __initconst;
+#define imx51_add_cspi(pdata)	\
+	imx_add_spi_imx(&imx51_cspi_data, pdata)
+
+extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst;
+#define imx51_add_ecspi(id, pdata)	\
+	imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
+
+extern const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst;
+#define imx51_add_esdhc(id, pdata)	\
+	imx_add_esdhc(&imx51_esdhc_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 7130449aacdc..4c7be87a7c9d 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -17,80 +17,24 @@
 #include <mach/imx-uart.h>
 #include <mach/irqs.h>
 
-static struct resource uart0[] = {
+static struct resource mxc_hsi2c_resources[] = {
 	{
-		.start = MX51_UART1_BASE_ADDR,
-		.end = MX51_UART1_BASE_ADDR + 0xfff,
+		.start = MX51_HSI2C_DMA_BASE_ADDR,
+		.end = MX51_HSI2C_DMA_BASE_ADDR + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX51_MXC_INT_UART1,
-		.end = MX51_MXC_INT_UART1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = MX51_UART2_BASE_ADDR,
-		.end = MX51_UART2_BASE_ADDR + 0xfff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX51_MXC_INT_UART2,
-		.end = MX51_MXC_INT_UART2,
-		.flags = IORESOURCE_IRQ,
 	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
 	{
-		.start = MX51_UART3_BASE_ADDR,
-		.end = MX51_UART3_BASE_ADDR + 0xfff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX51_MXC_INT_UART3,
-		.end = MX51_MXC_INT_UART3,
+		.start = MX51_MXC_INT_HS_I2C,
+		.end = MX51_MXC_INT_HS_I2C,
 		.flags = IORESOURCE_IRQ,
 	},
 };
 
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
+struct platform_device mxc_hsi2c_device = {
+	.name = "imx-i2c",
 	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource mxc_fec_resources[] = {
-	{
-		.start	= MX51_MXC_FEC_BASE_ADDR,
-		.end	= MX51_MXC_FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MX51_MXC_INT_FEC,
-		.end	= MX51_MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_fec_device = {
-	.name = "fec",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fec_resources),
-	.resource = mxc_fec_resources,
+	.num_resources = ARRAY_SIZE(mxc_hsi2c_resources),
+	.resource = mxc_hsi2c_resources
 };
 
 static u64 usb_dma_mask = DMA_BIT_MASK(32);
@@ -168,34 +112,57 @@ struct platform_device mxc_wdt = {
 	.resource = mxc_wdt_resources,
 };
 
+static struct resource mxc_kpp_resources[] = {
+	{
+		.start = MX51_MXC_INT_KPP,
+		.end = MX51_MXC_INT_KPP,
+		.flags = IORESOURCE_IRQ,
+	} , {
+		.start = MX51_KPP_BASE_ADDR,
+		.end = MX51_KPP_BASE_ADDR + 0x8 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_keypad_device = {
+	.name = "imx-keypad",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_kpp_resources),
+	.resource = mxc_kpp_resources,
+};
+
 static struct mxc_gpio_port mxc_gpio_ports[] = {
 	{
 		.chip.label = "gpio-0",
 		.base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO1_LOW,
+		.irq_high = MX51_MXC_INT_GPIO1_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START
 	},
 	{
 		.chip.label = "gpio-1",
 		.base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO2_LOW,
+		.irq_high = MX51_MXC_INT_GPIO2_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
 	},
 	{
 		.chip.label = "gpio-2",
 		.base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO3_LOW,
+		.irq_high = MX51_MXC_INT_GPIO3_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
 	},
 	{
 		.chip.label = "gpio-3",
 		.base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
 		.irq = MX51_MXC_INT_GPIO4_LOW,
+		.irq_high = MX51_MXC_INT_GPIO4_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
 	},
 };
 
-int __init mxc_register_gpios(void)
+int __init imx51_register_gpios(void)
 {
 	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
 }
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index c879ae71cd5b..af1d07c0bbc1 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -1,8 +1,6 @@
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_usbdr_host_device;
 extern struct platform_device mxc_usbh1_device;
 extern struct platform_device mxc_usbdr_udc_device;
 extern struct platform_device mxc_wdt;
+extern struct platform_device mxc_hsi2c_device;
+extern struct platform_device mxc_keypad_device;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
new file mode 100644
index 000000000000..a2e6e8c39d25
--- /dev/null
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -0,0 +1,222 @@
+/*
+ *
+ * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/leds.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/mach/arch.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define MBIMX51_TSC2007_GPIO	(2*32 + 30)
+#define MBIMX51_TSC2007_IRQ	(MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO)
+#define MBIMX51_LED0		(2*32 + 5)
+#define MBIMX51_LED1		(2*32 + 6)
+#define MBIMX51_LED2		(2*32 + 7)
+#define MBIMX51_LED3		(2*32 + 8)
+
+static struct gpio_led mbimx51_leds[] = {
+	{
+		.name			= "led0",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED0,
+	},
+	{
+		.name			= "led1",
+		.default_trigger	= "nand-disk",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED1,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "mmc0",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED2,
+	},
+	{
+		.name			= "led3",
+		.default_trigger	= "default-on",
+		.active_low		= 1,
+		.gpio			= MBIMX51_LED3,
+	},
+};
+
+static struct gpio_led_platform_data mbimx51_leds_info = {
+	.leds		= mbimx51_leds,
+	.num_leds	= ARRAY_SIZE(mbimx51_leds),
+};
+
+static struct platform_device mbimx51_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mbimx51_leds_info,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mbimx51_leds_gpio,
+};
+
+static struct pad_desc mbimx51_pads[] = {
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+
+	/* UART3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_KEY_COL4__UART3_RTS,
+	MX51_PAD_KEY_COL5__UART3_CTS,
+
+	/* TSC2007 IRQ */
+	MX51_PAD_NANDF_D10__GPIO_3_30,
+
+	/* LEDS */
+	MX51_PAD_DISPB2_SER_DIN__GPIO_3_5,
+	MX51_PAD_DISPB2_SER_DIO__GPIO_3_6,
+	MX51_PAD_DISPB2_SER_CLK__GPIO_3_7,
+	MX51_PAD_DISPB2_SER_RS__GPIO_3_8,
+
+	/* KPP */
+	MX51_PAD_KEY_ROW0__KEY_ROW0,
+	MX51_PAD_KEY_ROW1__KEY_ROW1,
+	MX51_PAD_KEY_ROW2__KEY_ROW2,
+	MX51_PAD_KEY_ROW3__KEY_ROW3,
+	MX51_PAD_KEY_COL0__KEY_COL0,
+	MX51_PAD_KEY_COL1__KEY_COL1,
+	MX51_PAD_KEY_COL2__KEY_COL2,
+	MX51_PAD_KEY_COL3__KEY_COL3,
+
+	/* SD 1 */
+	MX51_PAD_SD1_CMD__SD1_CMD,
+	MX51_PAD_SD1_CLK__SD1_CLK,
+	MX51_PAD_SD1_DATA0__SD1_DATA0,
+	MX51_PAD_SD1_DATA1__SD1_DATA1,
+	MX51_PAD_SD1_DATA2__SD1_DATA2,
+	MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+	/* SD 2 */
+	MX51_PAD_SD2_CMD__SD2_CMD,
+	MX51_PAD_SD2_CLK__SD2_CLK,
+	MX51_PAD_SD2_DATA0__SD2_DATA0,
+	MX51_PAD_SD2_DATA1__SD2_DATA1,
+	MX51_PAD_SD2_DATA2__SD2_DATA2,
+	MX51_PAD_SD2_DATA3__SD2_DATA3,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static int mbimx51_keymap[] = {
+	KEY(0, 0, KEY_1),
+	KEY(0, 1, KEY_2),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_UP),
+
+	KEY(1, 0, KEY_4),
+	KEY(1, 1, KEY_5),
+	KEY(1, 2, KEY_6),
+	KEY(1, 3, KEY_LEFT),
+
+	KEY(2, 0, KEY_7),
+	KEY(2, 1, KEY_8),
+	KEY(2, 2, KEY_9),
+	KEY(2, 3, KEY_RIGHT),
+
+	KEY(3, 0, KEY_0),
+	KEY(3, 1, KEY_DOWN),
+	KEY(3, 2, KEY_ESC),
+	KEY(3, 3, KEY_ENTER),
+};
+
+static struct matrix_keymap_data mbimx51_map_data = {
+	.keymap		= mbimx51_keymap,
+	.keymap_size	= ARRAY_SIZE(mbimx51_keymap),
+};
+
+static int tsc2007_get_pendown_state(void)
+{
+	return !gpio_get_value(MBIMX51_TSC2007_GPIO);
+}
+
+struct tsc2007_platform_data tsc2007_data = {
+	.model = 2007,
+	.x_plate_ohms = 180,
+	.get_pendown_state = tsc2007_get_pendown_state,
+};
+
+static struct i2c_board_info mbimx51_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tsc2007", 0x49),
+		.irq  = MBIMX51_TSC2007_IRQ,
+		.platform_data = &tsc2007_data,
+	}, {
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+/*
+ * baseboard initialization.
+ */
+void __init eukrea_mbimx51_baseboard_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
+					ARRAY_SIZE(mbimx51_pads));
+
+	imx51_add_imx_uart(1, NULL);
+	imx51_add_imx_uart(2, &uart_pdata);
+
+	gpio_request(MBIMX51_LED0, "LED0");
+	gpio_direction_output(MBIMX51_LED0, 1);
+	gpio_free(MBIMX51_LED0);
+	gpio_request(MBIMX51_LED1, "LED1");
+	gpio_direction_output(MBIMX51_LED1, 1);
+	gpio_free(MBIMX51_LED1);
+	gpio_request(MBIMX51_LED2, "LED2");
+	gpio_direction_output(MBIMX51_LED2, 1);
+	gpio_free(MBIMX51_LED2);
+	gpio_request(MBIMX51_LED3, "LED3");
+	gpio_direction_output(MBIMX51_LED3, 1);
+	gpio_free(MBIMX51_LED3);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_register_device(&mxc_keypad_device, &mbimx51_map_data);
+
+	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
+	gpio_direction_input(MBIMX51_TSC2007_GPIO);
+	set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING);
+	i2c_register_board_info(1, mbimx51_i2c_devices,
+				ARRAY_SIZE(mbimx51_i2c_devices));
+
+	imx51_add_esdhc(0, NULL);
+	imx51_add_esdhc(1, NULL);
+}
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
new file mode 100644
index 000000000000..2b48f5190830
--- /dev/null
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+#include <mach/audmux.h>
+
+#include "devices-imx51.h"
+#include "devices.h"
+
+#define MBIMXSD_GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, \
+				MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
+
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+	/* LED */
+	MX51_PAD_NANDF_D10__GPIO_3_30,
+	/* SWITCH */
+	MBIMXSD_GPIO_3_31,
+	/* UART2 */
+	MX51_PAD_UART2_RXD__UART2_RXD,
+	MX51_PAD_UART2_TXD__UART2_TXD,
+	/* UART 3 */
+	MX51_PAD_UART3_RXD__UART3_RXD,
+	MX51_PAD_UART3_TXD__UART3_TXD,
+	MX51_PAD_KEY_COL4__UART3_RTS,
+	MX51_PAD_KEY_COL5__UART3_CTS,
+	/* SD */
+	MX51_PAD_SD1_CMD__SD1_CMD,
+	MX51_PAD_SD1_CLK__SD1_CLK,
+	MX51_PAD_SD1_DATA0__SD1_DATA0,
+	MX51_PAD_SD1_DATA1__SD1_DATA1,
+	MX51_PAD_SD1_DATA2__SD1_DATA2,
+	MX51_PAD_SD1_DATA3__SD1_DATA3,
+};
+
+#define GPIO_LED1	(2 * 32 + 30)
+#define GPIO_SWITCH1	(2 * 32 + 31)
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_LED1,
+	},
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+	.leds		= eukrea_mbimxsd_leds,
+	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &eukrea_mbimxsd_led_info,
+	},
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+	{
+		.gpio		= GPIO_SWITCH1,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+	.buttons	= eukrea_mbimxsd_gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device eukrea_mbimxsd_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &eukrea_mbimxsd_button_data,
+	}
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_mbimxsd_leds_gpio,
+	&eukrea_mbimxsd_button_device,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx51sd init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd51_baseboard_init(void)
+{
+	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+			ARRAY_SIZE(eukrea_mbimxsd_pads)))
+		printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+	imx51_add_imx_uart(1, NULL);
+	imx51_add_imx_uart(2, &uart_pdata);
+
+	imx51_add_esdhc(0, NULL);
+
+	gpio_request(GPIO_LED1, "LED1");
+	gpio_direction_output(GPIO_LED1, 1);
+	gpio_free(GPIO_LED1);
+
+	gpio_request(GPIO_SWITCH1, "SWITCH1");
+	gpio_direction_input(GPIO_SWITCH1);
+	gpio_free(GPIO_SWITCH1);
+
+	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index b7677ef80cc4..bc3f30db8d9a 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -65,6 +65,8 @@ void __init mx51_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+int imx51_register_gpios(void);
+
 void __init mx51_init_irq(void)
 {
 	unsigned long tzic_addr;
@@ -80,4 +82,5 @@ void __init mx51_init_irq(void)
 		panic("unable to map TZIC interrupt controller\n");
 
 	tzic_init_irq(tzic_virt);
+	imx51_register_gpios();
 }
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
index ce4f59058189..b989baccd675 100644
--- a/arch/arm/mach-mxc91231/crm_regs.h
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -11,11 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
index 353bd977b393..027af4f0d18a 100644
--- a/arch/arm/mach-mxc91231/devices.c
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -135,7 +135,7 @@ static struct mxc_gpio_port mxc_gpio_ports[] = {
 	},
 };
 
-int __init mxc_register_gpios(void)
+int __init mxc91231_register_gpios(void)
 {
 	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
 }
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 69816ba82930..395d83be8c98 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -53,8 +53,6 @@ struct sys_timer zn5_timer = {
 };
 
 MACHINE_START(MAGX_ZN5, "Motorola Zn5")
-	.phys_io	= MXC91231_AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= MXC91231_PHYS_OFFSET + 0x100,
 	.map_io		= mxc91231_map_io,
 	.init_irq	= mxc91231_init_irq,
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
index 6becda3ff331..aeccfd755fee 100644
--- a/arch/arm/mach-mxc91231/mm.c
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -15,11 +15,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/mm.h>
@@ -88,7 +83,10 @@ void __init mxc91231_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+int mxc91231_register_gpios(void);
+
 void __init mxc91231_init_irq(void)
 {
+	mxc91231_register_gpios();
 	mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
 }
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index e96339e71d88..56a915228180 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,12 +13,10 @@
 
 #include "hardware.h"
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00100000		@ physical
-		movne	\rx, #io_p2v(0x00100000)	@ virtual
-		orr	\rx, \rx, #0x00000a00
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00000a00
+		orr	\rv, \rp, #io_p2v(0x00100000)	@ virtual
+		orr	\rp, \rp, #0x00100000		@ physical
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
index 25d5cc676e0f..7cca3574308f 100644
--- a/arch/arm/mach-netx/include/mach/vmalloc.h
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -16,4 +16,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index c9b174bc8ccf..ca8b203a3c99 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -200,8 +200,6 @@ static void __init nxdb500_init(void)
 }
 
 MACHINE_START(NXDB500, "Hilscher nxdb500")
-	.phys_io	= 0x00100000,
-	.io_pg_offst	= (io_p2v(0x00100000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 15b54c62d60f..d775cbe07278 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -93,8 +93,6 @@ static void __init nxdkn_init(void)
 }
 
 MACHINE_START(NXDKN, "Hilscher nxdkn")
-	.phys_io	= 0x00100000,
-	.io_pg_offst	= (io_p2v(0x00100000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 1061c01ff679..de369cd1dcbe 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -177,8 +177,6 @@ static void __init nxeb500hmi_init(void)
 }
 
 MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
-	.phys_io	= 0x00100000,
-	.io_pg_offst	= (io_p2v(0x00100000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 841d459ad59d..139930350d93 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -276,8 +276,6 @@ static void __init nhk8815_platform_init(void)
 
 MACHINE_START(NOMADIK, "NHK8815")
 	/* Maintainer: ST MicroElectronics */
-	.phys_io	= NOMADIK_UART0_BASE,
-	.io_pg_offst	= (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= cpu8815_map_io,
 	.init_irq	= cpu8815_init_irq,
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
index f035f4185274..89f793adf776 100644
--- a/arch/arm/mach-nomadik/clock.c
+++ b/arch/arm/mach-nomadik/clock.c
@@ -53,6 +53,10 @@ static struct clk clk_default;
 	}
 
 static struct clk_lookup lookups[] = {
+	{
+		.con_id		= "apb_pclk",
+		.clk		= &clk_default,
+	},
 	CLK(&clk_24, "mtu0"),
 	CLK(&clk_24, "mtu1"),
 	CLK(&clk_48, "uart0"),
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index 4f92acfba954..e7151b4b8889 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,13 +10,11 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x10000000	@ physical base address
-		movne	\rx, #0xf0000000	@ virtual base
-		add	\rx, \rx, #0x00100000
-		add	\rx, \rx, #0x000fb000
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00100000
+		add	\rp, \rp, #0x000fb000
+		add	\rv, \rp, #0xf0000000	@ virtual base
+		add	\rp, \rp, #0x10000000	@ physical base address
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index 5c934bdb7158..5a2acbdc3d67 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -12,11 +12,9 @@
 
 #include <mach/regs-board-a9m9750dev.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
-		ldrne	\rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+		.macro	addruart, rp, rv
+		ldr	\rp, =NS9XXX_CSxSTAT_PHYS(0)
+		ldr	\rv, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
index 9f79266f08e2..d70257042480 100644
--- a/arch/arm/mach-nuc93x/mach-nuc932evb.c
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -35,8 +35,6 @@ static void __init nuc932evb_init(void)
 
 MACHINE_START(NUC932EVB, "NUC932EVB")
 	/* Maintainer: Wan ZongShun */
-	.phys_io	= NUC93X_PA_UART,
-	.io_pg_offst	= (((u32)NUC93X_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= 0,
 	.map_io		= nuc932evb_map_io,
 	.init_irq	= nuc93x_init_irq,
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index b18d7c28ab7a..5f6496375404 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -1,3 +1,7 @@
+if ARCH_OMAP1
+
+menu "TI OMAP1 specific features"
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP1
 
@@ -124,7 +128,7 @@ config MACH_OMAP_PALMTT
 	help
 	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
 	  need a PalmOS compatible bootloader (Garux); check out
-	  http://www.hackndev.com/palm/tt/ for more information.
+	  http://garux.sourceforge.net/ for more information.
 	  Say Y here if you have this PDA model, say N otherwise.
 
 config MACH_SX1
@@ -224,6 +228,12 @@ config OMAP_ARM_120MHZ
 	help
           Enable 120MHz clock for OMAP CPU. If unsure, say N.
 
+config OMAP_ARM_96MHZ
+	bool "OMAP ARM 96 MHz CPU"
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
+	help
+          Enable 96MHz clock for OMAP CPU. If unsure, say N.
+
 config OMAP_ARM_60MHZ
 	bool "OMAP ARM 60 MHz CPU"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
@@ -237,3 +247,6 @@ config OMAP_ARM_30MHZ
 	help
           Enable 30MHz clock for OMAP CPU. If unsure, say N.
 
+endmenu
+
+endif
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index ea231c7a550a..9a304d854e33 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_OMAP_MPU_TIMER)	+= time.o
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
 
 # DSP
 obj-$(CONFIG_OMAP_MBOX_FWK)	+= mailbox_mach.o
@@ -23,6 +23,9 @@ obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
 
 led-y := leds.o
 
+usb-fs-$(CONFIG_USB)			:= usb.o
+obj-y					+= $(usb-fs-m) $(usb-fs-y)
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index fdd1dd53fa9c..1d4163b9f0b7 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -16,9 +16,12 @@
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
+#include <media/soc_camera.h>
+
 #include <asm/serial.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,6 +35,7 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
+#include <mach/camera.h>
 
 #include <mach/ams-delta-fiq.h>
 
@@ -213,10 +217,56 @@ static struct platform_device ams_delta_led_device = {
 	.id	= -1
 };
 
+static struct i2c_board_info ams_delta_camera_board_info[] = {
+	{
+		I2C_BOARD_INFO("ov6650", 0x60),
+	},
+};
+
+#ifdef CONFIG_LEDS_TRIGGERS
+DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
+
+static int ams_delta_camera_power(struct device *dev, int power)
+{
+	/*
+	 * turn on camera LED
+	 */
+	if (power)
+		led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
+	else
+		led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
+	return 0;
+}
+#else
+#define ams_delta_camera_power	NULL
+#endif
+
+static struct soc_camera_link __initdata ams_delta_iclink = {
+	.bus_id         = 0,	/* OMAP1 SoC camera bus */
+	.i2c_adapter_id = 1,
+	.board_info     = &ams_delta_camera_board_info[0],
+	.module_name    = "ov6650",
+	.power		= ams_delta_camera_power,
+};
+
+static struct platform_device ams_delta_camera_device = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &ams_delta_iclink,
+	},
+};
+
+static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
+	.camexclk_khz	= 12000,	/* default 12MHz clock, no extra DPLL */
+	.lclk_khz_max	= 1334,		/* results in 5fps CIF, 10fps QCIF */
+};
+
 static struct platform_device *ams_delta_devices[] __initdata = {
 	&ams_delta_kp_device,
 	&ams_delta_lcd_device,
 	&ams_delta_led_device,
+	&ams_delta_camera_device,
 };
 
 static void __init ams_delta_init(void)
@@ -225,6 +275,20 @@ static void __init ams_delta_init(void)
 	omap_cfg_reg(UART1_TX);
 	omap_cfg_reg(UART1_RTS);
 
+	/* parallel camera interface */
+	omap_cfg_reg(H19_1610_CAM_EXCLK);
+	omap_cfg_reg(J15_1610_CAM_LCLK);
+	omap_cfg_reg(L18_1610_CAM_VS);
+	omap_cfg_reg(L15_1610_CAM_HS);
+	omap_cfg_reg(L19_1610_CAM_D0);
+	omap_cfg_reg(K14_1610_CAM_D1);
+	omap_cfg_reg(K15_1610_CAM_D2);
+	omap_cfg_reg(K19_1610_CAM_D3);
+	omap_cfg_reg(K18_1610_CAM_D4);
+	omap_cfg_reg(J14_1610_CAM_D5);
+	omap_cfg_reg(J19_1610_CAM_D6);
+	omap_cfg_reg(J18_1610_CAM_D7);
+
 	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 
 	omap_board_config = ams_delta_config;
@@ -235,7 +299,12 @@ static void __init ams_delta_init(void)
 	/* Clear latch2 (NAND, LCD, modem enable) */
 	ams_delta_latch2_write(~0, 0);
 
-	omap_usb_init(&ams_delta_usb_config);
+	omap1_usb_init(&ams_delta_usb_config);
+	omap1_set_camera_info(&ams_delta_camera_platform_data);
+#ifdef CONFIG_LEDS_TRIGGERS
+	led_trigger_register_simple("ams_delta_camera",
+			&ams_delta_camera_led_trigger);
+#endif
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
 #ifdef CONFIG_AMS_DELTA_FIQ
@@ -297,10 +366,9 @@ static void __init ams_delta_map_io(void)
 
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= ams_delta_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= ams_delta_init_irq,
 	.init_machine	= ams_delta_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 096f2ed102cb..149fdd32e127 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -292,6 +292,18 @@ static void __init omap_fsample_init(void)
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(E2_7XX_KBR0);
+	omap_cfg_reg(J7_7XX_KBR1);
+	omap_cfg_reg(E1_7XX_KBR2);
+	omap_cfg_reg(F3_7XX_KBR3);
+	omap_cfg_reg(D2_7XX_KBR4);
+	omap_cfg_reg(C2_7XX_KBC0);
+	omap_cfg_reg(D3_7XX_KBC1);
+	omap_cfg_reg(E4_7XX_KBC2);
+	omap_cfg_reg(F4_7XX_KBC3);
+	omap_cfg_reg(E3_7XX_KBC4);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	omap_board_config = fsample_config;
@@ -374,10 +386,9 @@ static void __init omap_fsample_map_io(void)
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 /* Maintainer: Brian Swetland <swetland@google.com> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_fsample_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_fsample_init_irq,
 	.init_machine	= omap_fsample_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index e1195a3467b8..23f4ab9e2651 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -72,12 +72,12 @@ static void __init omap_generic_init(void)
 		omap_cfg_reg(UART3_TX);
 		omap_cfg_reg(UART3_RX);
 
-		omap_usb_init(&generic1510_usb_config);
+		omap1_usb_init(&generic1510_usb_config);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (!cpu_is_omap1510()) {
-		omap_usb_init(&generic1610_usb_config);
+		omap1_usb_init(&generic1610_usb_config);
 	}
 #endif
 
@@ -94,10 +94,9 @@ static void __init omap_generic_map_io(void)
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	/* Maintainer: Tony Lindgren <tony@atomide.com> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_generic_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index b30c4990744d..f2fc43d8382b 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -58,8 +58,7 @@ static struct omap_mmc_platform_data mmc1_data = {
 	.dma_mask			= 0xffffffff,
 	.slots[0]       = {
 		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_28_29 | MMC_VDD_30_31 |
-					  MMC_VDD_32_33 | MMC_VDD_33_34,
+		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index d1100e4f65ac..197adb49dc5a 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -292,15 +292,6 @@ static struct platform_device h2_kp_device = {
 
 #define H2_IRDA_FIRSEL_GPIO_PIN	17
 
-#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
-static int h2_transceiver_mode(struct device *dev, int state)
-{
-	/* SIR when low, else MIR/FIR when HIGH */
-	gpio_set_value(H2_IRDA_FIRSEL_GPIO_PIN, !(state & IR_SIRMODE));
-	return 0;
-}
-#endif
-
 static struct omap_irda_config h2_irda_data = {
 	.transceiver_cap	= IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
 	.rx_channel		= OMAP_DMA_UART3_RX,
@@ -437,14 +428,18 @@ static void __init h2_init(void)
 	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
 	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
 
-	/* Irda */
-#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
-	omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
-	if (gpio_request(H2_IRDA_FIRSEL_GPIO_PIN, "IRDA mode") < 0)
-		BUG();
-	gpio_direction_output(H2_IRDA_FIRSEL_GPIO_PIN, 0);
-	h2_irda_data.transceiver_mode = h2_transceiver_mode;
-#endif
+	/* Mux pins for keypad */
+	omap_cfg_reg(F18_1610_KBC0);
+	omap_cfg_reg(D20_1610_KBC1);
+	omap_cfg_reg(D19_1610_KBC2);
+	omap_cfg_reg(E18_1610_KBC3);
+	omap_cfg_reg(C21_1610_KBC4);
+	omap_cfg_reg(G18_1610_KBR0);
+	omap_cfg_reg(F19_1610_KBR1);
+	omap_cfg_reg(H14_1610_KBR2);
+	omap_cfg_reg(E20_1610_KBR3);
+	omap_cfg_reg(E19_1610_KBR4);
+	omap_cfg_reg(N19_1610_KBR5);
 
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
 	omap_board_config = h2_config;
@@ -452,7 +447,7 @@ static void __init h2_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
 			      ARRAY_SIZE(h2_i2c_board_info));
-	omap_usb_init(&h2_usb_config);
+	omap1_usb_init(&h2_usb_config);
 	h2_mmc_init();
 }
 
@@ -463,10 +458,9 @@ static void __init h2_map_io(void)
 
 MACHINE_START(OMAP_H2, "TI-H2")
 	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= h2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= h2_init_irq,
 	.init_machine	= h2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 54b0f063e263..2098525e7cc5 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -40,8 +40,7 @@ static struct omap_mmc_platform_data mmc1_data = {
 	.dma_mask			= 0xffffffff,
 	.slots[0]       = {
 		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_28_29 | MMC_VDD_30_31 |
-					  MMC_VDD_32_33 | MMC_VDD_33_34,
+		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index a53ab8297d25..9126e3e37b4a 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -397,6 +397,19 @@ static void __init h3_init(void)
 	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
 	omap_cfg_reg(V2_1710_GPIO10);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(F18_1610_KBC0);
+	omap_cfg_reg(D20_1610_KBC1);
+	omap_cfg_reg(D19_1610_KBC2);
+	omap_cfg_reg(E18_1610_KBC3);
+	omap_cfg_reg(C21_1610_KBC4);
+	omap_cfg_reg(G18_1610_KBR0);
+	omap_cfg_reg(F19_1610_KBR1);
+	omap_cfg_reg(H14_1610_KBR2);
+	omap_cfg_reg(E20_1610_KBR3);
+	omap_cfg_reg(E19_1610_KBR4);
+	omap_cfg_reg(N19_1610_KBR5);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	spi_register_board_info(h3_spi_board_info,
 				ARRAY_SIZE(h3_spi_board_info));
@@ -405,7 +418,7 @@ static void __init h3_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
 			      ARRAY_SIZE(h3_i2c_board_info));
-	omap_usb_init(&h3_usb_config);
+	omap1_usb_init(&h3_usb_config);
 	h3_mmc_init();
 }
 
@@ -433,10 +446,9 @@ static void __init h3_map_io(void)
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	/* Maintainer: Texas Instruments, Inc. */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= h3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= h3_init_irq,
 	.init_machine	= h3_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 8e313b4b99a9..071af3e47789 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -30,6 +30,13 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/htcpld.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,6 +46,7 @@
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/usb.h>
+#include <plat/mmc.h>
 
 #include <mach/irqs.h>
 
@@ -52,13 +60,123 @@
 #define       OMAP_LCDC_CTRL_LCD_EN           (1 << 0)
 #define       OMAP_LCDC_STAT_DONE             (1 << 0)
 
-static struct omap_lcd_config htcherald_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
+/* GPIO definitions for the power button and keyboard slide switch */
+#define HTCHERALD_GPIO_POWER 139
+#define HTCHERALD_GPIO_SLIDE 174
+#define HTCHERALD_GIRQ_BTNS 141
 
-static struct omap_board_config_kernel htcherald_config[] __initdata = {
-	{ OMAP_TAG_LCD, &htcherald_lcd_config },
-};
+/* GPIO definitions for the touchscreen */
+#define HTCHERALD_GPIO_TS 76
+
+/* HTCPLD definitions */
+
+/*
+ * CPLD Logic
+ *
+ * Chip 3 - 0x03
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * DPAD light          x x x x  x x x 1
+ * SoundDev            x x x x  1 x x x
+ * Screen white        1 x x x  x x x x
+ * MMC power on        x x x x  x 1 x x
+ * Happy times (n)     0 x x x  x 1 x x
+ *
+ * Chip 4 - 0x04
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * Keyboard light      x x x x  x x x 1
+ * LCD Bright (4)      x x x x  x 1 1 x
+ * LCD Bright (3)      x x x x  x 0 1 x
+ * LCD Bright (2)      x x x x  x 1 0 x
+ * LCD Bright (1)      x x x x  x 0 0 x
+ * LCD Off             x x x x  0 x x x
+ * LCD image (fb)      1 x x x  x x x x
+ * LCD image (white)   0 x x x  x x x x
+ * Caps lock LED       x x 1 x  x x x x
+ *
+ * Chip 5 - 0x05
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * Red (solid)         x x x x  x 1 x x
+ * Red (flash)         x x x x  x x 1 x
+ * Green (GSM flash)   x x x x  1 x x x
+ * Green (GSM solid)   x x x 1  x x x x
+ * Green (wifi flash)  x x 1 x  x x x x
+ * Blue (bt flash)     x 1 x x  x x x x
+ * DPAD Int Enable     1 x x x  x x x 0
+ *
+ * (Combinations of the above can be made for different colors.)
+ * The direction pad interrupt enable must be set each time the
+ * interrupt is handled.
+ *
+ * Chip 6 - 0x06
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * Vibrator            x x x x  1 x x x
+ * Alt LED             x x x 1  x x x x
+ * Screen white        1 x x x  x x x x
+ * Screen white        x x 1 x  x x x x
+ * Screen white        x 0 x x  x x x x
+ * Enable kbd dpad     x x x x  x x 0 x
+ * Happy Times         0 1 0 x  x x 0 x
+ */
+
+/*
+ * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account
+ * for the 16 MPUIO lines.
+ */
+#define HTCPLD_GPIO_START_OFFSET	(OMAP_MAX_GPIO_LINES + 16)
+#define HTCPLD_IRQ(chip, offset)	(OMAP_IRQ_END + 8 * (chip) + (offset))
+#define HTCPLD_BASE(chip, offset)	\
+	(HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset))
+
+#define HTCPLD_GPIO_LED_DPAD		HTCPLD_BASE(0, 0)
+#define HTCPLD_GPIO_LED_KBD		HTCPLD_BASE(1, 0)
+#define HTCPLD_GPIO_LED_CAPS		HTCPLD_BASE(1, 5)
+#define HTCPLD_GPIO_LED_RED_FLASH	HTCPLD_BASE(2, 1)
+#define HTCPLD_GPIO_LED_RED_SOLID	HTCPLD_BASE(2, 2)
+#define HTCPLD_GPIO_LED_GREEN_FLASH	HTCPLD_BASE(2, 3)
+#define HTCPLD_GPIO_LED_GREEN_SOLID	HTCPLD_BASE(2, 4)
+#define HTCPLD_GPIO_LED_WIFI		HTCPLD_BASE(2, 5)
+#define HTCPLD_GPIO_LED_BT		HTCPLD_BASE(2, 6)
+#define HTCPLD_GPIO_LED_VIBRATE		HTCPLD_BASE(3, 3)
+#define HTCPLD_GPIO_LED_ALT		HTCPLD_BASE(3, 4)
+
+#define HTCPLD_GPIO_RIGHT_KBD		HTCPLD_BASE(6, 7)
+#define HTCPLD_GPIO_UP_KBD		HTCPLD_BASE(6, 6)
+#define HTCPLD_GPIO_LEFT_KBD		HTCPLD_BASE(6, 5)
+#define HTCPLD_GPIO_DOWN_KBD		HTCPLD_BASE(6, 4)
+
+#define HTCPLD_GPIO_RIGHT_DPAD		HTCPLD_BASE(7, 7)
+#define HTCPLD_GPIO_UP_DPAD		HTCPLD_BASE(7, 6)
+#define HTCPLD_GPIO_LEFT_DPAD		HTCPLD_BASE(7, 5)
+#define HTCPLD_GPIO_DOWN_DPAD		HTCPLD_BASE(7, 4)
+#define HTCPLD_GPIO_ENTER_DPAD		HTCPLD_BASE(7, 3)
+
+/*
+ * The htcpld chip requires a gpio write to a specific line
+ * to re-enable interrupts after one has occurred.
+ */
+#define HTCPLD_GPIO_INT_RESET_HI	HTCPLD_BASE(2, 7)
+#define HTCPLD_GPIO_INT_RESET_LO	HTCPLD_BASE(2, 0)
+
+/* Chip 5 */
+#define HTCPLD_IRQ_RIGHT_KBD		HTCPLD_IRQ(0, 7)
+#define HTCPLD_IRQ_UP_KBD		HTCPLD_IRQ(0, 6)
+#define HTCPLD_IRQ_LEFT_KBD		HTCPLD_IRQ(0, 5)
+#define HTCPLD_IRQ_DOWN_KBD		HTCPLD_IRQ(0, 4)
+
+/* Chip 6 */
+#define HTCPLD_IRQ_RIGHT_DPAD		HTCPLD_IRQ(1, 7)
+#define HTCPLD_IRQ_UP_DPAD		HTCPLD_IRQ(1, 6)
+#define HTCPLD_IRQ_LEFT_DPAD		HTCPLD_IRQ(1, 5)
+#define HTCPLD_IRQ_DOWN_DPAD		HTCPLD_IRQ(1, 4)
+#define HTCPLD_IRQ_ENTER_DPAD		HTCPLD_IRQ(1, 3)
 
 /* Keyboard definition */
 
@@ -140,6 +258,129 @@ static struct platform_device kp_device = {
 	.resource	= kp_resources,
 };
 
+/* GPIO buttons for keyboard slide and power button */
+static struct gpio_keys_button herald_gpio_keys_table[] = {
+	{BTN_0,  HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
+	{SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW,  1, 20},
+
+	{KEY_LEFT,  HTCPLD_GPIO_LEFT_KBD,  1, "LEFT",  EV_KEY, 1, 20},
+	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20},
+	{KEY_UP,    HTCPLD_GPIO_UP_KBD,    1, "UP",    EV_KEY, 1, 20},
+	{KEY_DOWN,  HTCPLD_GPIO_DOWN_KBD,  1, "DOWN",  EV_KEY, 1, 20},
+
+	{KEY_LEFT,  HTCPLD_GPIO_LEFT_DPAD,   1, "DLEFT",  EV_KEY, 1, 20},
+	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD,  1, "DRIGHT", EV_KEY, 1, 20},
+	{KEY_UP,    HTCPLD_GPIO_UP_DPAD,     1, "DUP",    EV_KEY, 1, 20},
+	{KEY_DOWN,  HTCPLD_GPIO_DOWN_DPAD,   1, "DDOWN",  EV_KEY, 1, 20},
+	{KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD,  1, "DENTER", EV_KEY, 1, 20},
+};
+
+static struct gpio_keys_platform_data herald_gpio_keys_data = {
+	.buttons	= herald_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(herald_gpio_keys_table),
+	.rep		= 1,
+};
+
+static struct platform_device herald_gpiokeys_device = {
+	.name      = "gpio-keys",
+	.id		= -1,
+	.dev = {
+		.platform_data = &herald_gpio_keys_data,
+	},
+};
+
+/* LEDs for the Herald.  These connect to the HTCPLD GPIO device. */
+static struct gpio_led gpio_leds[] = {
+	{"dpad",        NULL, HTCPLD_GPIO_LED_DPAD,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"kbd",         NULL, HTCPLD_GPIO_LED_KBD,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"vibrate",     NULL, HTCPLD_GPIO_LED_VIBRATE,     0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"red_solid",   "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"red_flash",   NULL, HTCPLD_GPIO_LED_RED_FLASH,   0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"wifi",        NULL, HTCPLD_GPIO_LED_WIFI,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"bt",          NULL, HTCPLD_GPIO_LED_BT,          0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"caps",        NULL, HTCPLD_GPIO_LED_CAPS,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"alt",         NULL, HTCPLD_GPIO_LED_ALT,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
+};
+
+static struct gpio_led_platform_data gpio_leds_data = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+	.name		= "leds-gpio",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &gpio_leds_data,
+	},
+};
+
+/* HTC PLD chips */
+
+static struct resource htcpld_resources[] = {
+	[0] = {
+		.start  = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
+		.end    = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct htcpld_chip_platform_data htcpld_chips[] = {
+	[0] = {
+		.addr		= 0x03,
+		.reset		= 0x04,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(0, 0),
+		.gpio_in_base	= HTCPLD_BASE(4, 0),
+	},
+	[1] = {
+		.addr		= 0x04,
+		.reset		= 0x8e,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(1, 0),
+		.gpio_in_base	= HTCPLD_BASE(5, 0),
+	},
+	[2] = {
+		.addr		= 0x05,
+		.reset		= 0x80,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(2, 0),
+		.gpio_in_base	= HTCPLD_BASE(6, 0),
+		.irq_base	= HTCPLD_IRQ(0, 0),
+		.num_irqs	= 8,
+	},
+	[3] = {
+		.addr		= 0x06,
+		.reset		= 0x40,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(3, 0),
+		.gpio_in_base	= HTCPLD_BASE(7, 0),
+		.irq_base	= HTCPLD_IRQ(1, 0),
+		.num_irqs	= 8,
+	},
+};
+
+struct htcpld_core_platform_data htcpld_pfdata = {
+	.int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
+	.int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
+	.i2c_adapter_id	   = 1,
+
+	.chip		   = htcpld_chips,
+	.num_chip	   = ARRAY_SIZE(htcpld_chips),
+};
+
+static struct platform_device htcpld_device = {
+	.name		= "i2c-htcpld",
+	.id		= -1,
+	.resource	= htcpld_resources,
+	.num_resources	= ARRAY_SIZE(htcpld_resources),
+	.dev	= {
+		.platform_data	= &htcpld_pfdata,
+	},
+};
+
 /* USB Device */
 static struct omap_usb_config htcherald_usb_config __initdata = {
 	.otg = 0,
@@ -150,14 +391,71 @@ static struct omap_usb_config htcherald_usb_config __initdata = {
 };
 
 /* LCD Device resources */
+static struct omap_lcd_config htcherald_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel htcherald_config[] __initdata = {
+	{ OMAP_TAG_LCD, &htcherald_lcd_config },
+};
+
 static struct platform_device lcd_device = {
 	.name           = "lcd_htcherald",
 	.id             = -1,
 };
 
+/* MMC Card */
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+static struct omap_mmc_platform_data htc_mmc1_data = {
+	.nr_slots                       = 1,
+	.switch_slot                    = NULL,
+	.slots[0]       = {
+		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
+		.name                   = "mmcblk",
+		.nomux                  = 1,
+		.wires                  = 4,
+		.switch_pin             = -1,
+	},
+};
+
+static struct omap_mmc_platform_data *htc_mmc_data[1];
+#endif
+
+
+/* Platform devices for the Herald */
 static struct platform_device *devices[] __initdata = {
 	&kp_device,
 	&lcd_device,
+	&htcpld_device,
+	&gpio_leds_device,
+	&herald_gpiokeys_device,
+};
+
+/*
+ * Touchscreen
+ */
+static const struct ads7846_platform_data htcherald_ts_platform_data = {
+	.model			= 7846,
+	.keep_vref_on		= 1,
+	.x_plate_ohms		= 496,
+	.gpio_pendown		= HTCHERALD_GPIO_TS,
+	.pressure_max		= 100000,
+	.pressure_min		= 5000,
+	.x_min			= 528,
+	.x_max			= 3760,
+	.y_min			= 624,
+	.y_max			= 3760,
+};
+
+static struct spi_board_info __initdata htcherald_spi_board_info[] = {
+	{
+		.modalias		= "ads7846",
+		.platform_data		= &htcherald_ts_platform_data,
+		.irq			= OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS),
+		.max_speed_hz		= 2500000,
+		.bus_num		= 2,
+		.chip_select		= 1,
+	}
 };
 
 /*
@@ -278,6 +576,7 @@ static void __init htcherald_init(void)
 {
 	printk(KERN_INFO "HTC Herald init.\n");
 
+	/* Do board initialization before we register all the devices */
 	omap_gpio_init();
 
 	omap_board_config = htcherald_config;
@@ -287,7 +586,17 @@ static void __init htcherald_init(void)
 	htcherald_disable_watchdog();
 
 	htcherald_usb_enable();
-	omap_usb_init(&htcherald_usb_config);
+	omap1_usb_init(&htcherald_usb_config);
+
+	spi_register_board_info(htcherald_spi_board_info,
+		ARRAY_SIZE(htcherald_spi_board_info));
+
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+	htc_mmc_data[0] = &htc_mmc1_data;
+	omap1_init_mmc(htc_mmc_data, 1);
+#endif
 }
 
 static void __init htcherald_init_irq(void)
@@ -300,10 +609,9 @@ static void __init htcherald_init_irq(void)
 MACHINE_START(HERALD, "HTC Herald")
 	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
 	/* Maintainer: wing-linux.sourceforge.net */
-	.phys_io        = 0xfff00000,
-	.io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params    = 0x10000100,
 	.map_io         = htcherald_map_io,
+	.reserve	= omap_reserve,
 	.init_irq       = htcherald_init_irq,
 	.init_machine   = htcherald_init,
 	.timer          = &omap_timer,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 5d12fd35681b..dc2b86fd66c1 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -422,13 +422,13 @@ static void __init innovator_init(void)
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
-		omap_usb_init(&innovator1510_usb_config);
+		omap1_usb_init(&innovator1510_usb_config);
 		innovator_config[1].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
-		omap_usb_init(&h2_usb_config);
+		omap1_usb_init(&h2_usb_config);
 		innovator_config[1].data = &innovator1610_lcd_config;
 	}
 #endif
@@ -459,10 +459,9 @@ static void __init innovator_map_io(void)
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= innovator_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= innovator_init_irq,
 	.init_machine	= innovator_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 71e1a3fad0ea..aa8375b2a0a3 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -32,7 +32,6 @@
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
-#include <plat/dsp_common.h>
 #include <plat/hwa742.h>
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>
@@ -242,138 +241,6 @@ static inline void nokia770_mmc_init(void)
 }
 #endif
 
-#if	defined(CONFIG_OMAP_DSP)
-/*
- * audio power control
- */
-#define	HEADPHONE_GPIO		14
-#define	AMPLIFIER_CTRL_GPIO	58
-
-static struct clk *dspxor_ck;
-static DEFINE_MUTEX(audio_pwr_lock);
-/*
- * audio_pwr_state
- * +--+-------------------------+---------------------------------------+
- * |-1|down			|power-up request -> 0			|
- * +--+-------------------------+---------------------------------------+
- * | 0|up			|power-down(1) request -> 1		|
- * |  |				|power-down(2) request -> (ignore)	|
- * +--+-------------------------+---------------------------------------+
- * | 1|up,			|power-up request -> 0			|
- * |  |received down(1) request	|power-down(2) request -> -1		|
- * +--+-------------------------+---------------------------------------+
- */
-static int audio_pwr_state = -1;
-
-static inline void aic23_power_up(void)
-{
-}
-static inline void aic23_power_down(void)
-{
-}
-
-/*
- * audio_pwr_up / down should be called under audio_pwr_lock
- */
-static void nokia770_audio_pwr_up(void)
-{
-	clk_enable(dspxor_ck);
-
-	/* Turn on codec */
-	aic23_power_up();
-
-	if (gpio_get_value(HEADPHONE_GPIO))
-		/* HP not connected, turn on amplifier */
-		gpio_set_value(AMPLIFIER_CTRL_GPIO, 1);
-	else
-		/* HP connected, do not turn on amplifier */
-		printk("HP connected\n");
-}
-
-static void codec_delayed_power_down(struct work_struct *work)
-{
-	mutex_lock(&audio_pwr_lock);
-	if (audio_pwr_state == -1)
-		aic23_power_down();
-	clk_disable(dspxor_ck);
-	mutex_unlock(&audio_pwr_lock);
-}
-
-static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down);
-
-static void nokia770_audio_pwr_down(void)
-{
-	/* Turn off amplifier */
-	gpio_set_value(AMPLIFIER_CTRL_GPIO, 0);
-
-	/* Turn off codec: schedule delayed work */
-	schedule_delayed_work(&codec_power_down_work, HZ / 20);	/* 50ms */
-}
-
-static int
-nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage)
-{
-	mutex_lock(&audio_pwr_lock);
-	if (audio_pwr_state == -1)
-		nokia770_audio_pwr_up();
-	/* force audio_pwr_state = 0, even if it was 1. */
-	audio_pwr_state = 0;
-	mutex_unlock(&audio_pwr_lock);
-	return 0;
-}
-
-static int
-nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
-{
-	mutex_lock(&audio_pwr_lock);
-	switch (stage) {
-	case 1:
-		if (audio_pwr_state == 0)
-			audio_pwr_state = 1;
-		break;
-	case 2:
-		if (audio_pwr_state == 1) {
-			nokia770_audio_pwr_down();
-			audio_pwr_state = -1;
-		}
-		break;
-	}
-	mutex_unlock(&audio_pwr_lock);
-	return 0;
-}
-
-static struct dsp_kfunc_device nokia770_audio_device = {
-	.name	 = "audio",
-	.type	 = DSP_KFUNC_DEV_TYPE_AUDIO,
-	.enable  = nokia770_audio_pwr_up_request,
-	.disable = nokia770_audio_pwr_down_request,
-};
-
-static __init int omap_dsp_init(void)
-{
-	int ret;
-
-	dspxor_ck = clk_get(0, "dspxor_ck");
-	if (IS_ERR(dspxor_ck)) {
-		printk(KERN_ERR "couldn't acquire dspxor_ck\n");
-		return PTR_ERR(dspxor_ck);
-	}
-
-	ret = dsp_kfunc_device_register(&nokia770_audio_device);
-	if (ret) {
-		printk(KERN_ERR
-		       "KFUNC device registration faild: %s\n",
-		       nokia770_audio_device.name);
-		goto out;
-	}
-	return 0;
- out:
-	return ret;
-}
-#else
-#define omap_dsp_init()		do {} while (0)
-#endif	/* CONFIG_OMAP_DSP */
-
 static void __init omap_nokia770_init(void)
 {
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
@@ -382,11 +249,10 @@ static void __init omap_nokia770_init(void)
 	omap_gpio_init();
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
-	omap_dsp_init();
 	hwa742_dev_init();
 	ads7846_dev_init();
 	mipid_dev_init();
-	omap_usb_init(&nokia770_usb_config);
+	omap1_usb_init(&nokia770_usb_config);
 	nokia770_mmc_init();
 }
 
@@ -396,10 +262,9 @@ static void __init omap_nokia770_map_io(void)
 }
 
 MACHINE_START(NOKIA770, "Nokia 770")
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_nokia770_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_nokia770_init_irq,
 	.init_machine	= omap_nokia770_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 80d862001def..e9dd79149a8e 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -560,7 +560,7 @@ static void __init osk_init(void)
 	l |= (3 << 1);
 	omap_writel(l, USB_TRANSCEIVER_CTRL);
 
-	omap_usb_init(&osk_usb_config);
+	omap1_usb_init(&osk_usb_config);
 
 	/* irq for tps65010 chip */
 	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
@@ -580,10 +580,9 @@ static void __init osk_map_io(void)
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= osk_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= osk_init_irq,
 	.init_machine	= osk_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 569b4c9085cd..f32738b1eb6b 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -213,90 +213,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-#ifdef CONFIG_APM
-/*
- * Values measured in 10 minute intervals averaged over 10 samples.
- * May differ slightly from device to device but should be accurate
- * enough to give basic idea of battery life left and trigger
- * potential alerts.
- */
-static const int palmte_battery_sample[] = {
-	2194, 2157, 2138, 2120,
-	2104, 2089, 2075, 2061,
-	2048, 2038, 2026, 2016,
-	2008, 1998, 1989, 1980,
-	1970, 1958, 1945, 1928,
-	1910, 1888, 1860, 1827,
-	1791, 1751, 1709, 1656,
-};
-
-#define INTERVAL		10
-#define BATTERY_HIGH_TRESHOLD	66
-#define BATTERY_LOW_TRESHOLD	33
-
-static void palmte_get_power_status(struct apm_power_info *info, int *battery)
-{
-	int charging, batt, hi, lo, mid;
-
-	charging = !gpio_get_value(PALMTE_DC_GPIO);
-	batt = battery[0];
-	if (charging)
-		batt -= 60;
-
-	hi = ARRAY_SIZE(palmte_battery_sample);
-	lo = 0;
-
-	info->battery_flag = 0;
-	info->units = APM_UNITS_MINS;
-
-	if (batt > palmte_battery_sample[lo]) {
-		info->battery_life = 100;
-		info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample);
-	} else if (batt <= palmte_battery_sample[hi - 1]) {
-		info->battery_life = 0;
-		info->time = 0;
-	} else {
-		while (hi > lo + 1) {
-			mid = (hi + lo) >> 1;
-			if (batt <= palmte_battery_sample[mid])
-				lo = mid;
-			else
-				hi = mid;
-		}
-
-		mid = palmte_battery_sample[lo] - palmte_battery_sample[hi];
-		hi = palmte_battery_sample[lo] - batt;
-		info->battery_life = 100 - (100 * lo + 100 * hi / mid) /
-			ARRAY_SIZE(palmte_battery_sample);
-		info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) -
-				lo) - INTERVAL * hi / mid;
-	}
-
-	if (charging) {
-		info->ac_line_status = APM_AC_ONLINE;
-		info->battery_status = APM_BATTERY_STATUS_CHARGING;
-		info->battery_flag |= APM_BATTERY_FLAG_CHARGING;
-	} else {
-		info->ac_line_status = APM_AC_OFFLINE;
-		if (info->battery_life > BATTERY_HIGH_TRESHOLD)
-			info->battery_status = APM_BATTERY_STATUS_HIGH;
-		else if (info->battery_life > BATTERY_LOW_TRESHOLD)
-			info->battery_status = APM_BATTERY_STATUS_LOW;
-		else
-			info->battery_status = APM_BATTERY_STATUS_CRITICAL;
-	}
-
-	if (info->battery_life > BATTERY_HIGH_TRESHOLD)
-		info->battery_flag |= APM_BATTERY_FLAG_HIGH;
-	else if (info->battery_life > BATTERY_LOW_TRESHOLD)
-		info->battery_flag |= APM_BATTERY_FLAG_LOW;
-	else
-		info->battery_flag |= APM_BATTERY_FLAG_CRITICAL;
-}
-#else
-#define palmte_get_power_status	NULL
-#endif
-
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
 };
@@ -359,7 +275,7 @@ static void __init omap_palmte_init(void)
 	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
 	palmte_misc_gpio_setup();
 	omap_serial_init();
-	omap_usb_init(&palmte_usb_config);
+	omap1_usb_init(&palmte_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
@@ -369,10 +285,9 @@ static void __init omap_palmte_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_palmte_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_palmte_init_irq,
 	.init_machine	= omap_palmte_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 6ad49a2cc1a0..ed1400a67f75 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -307,7 +307,7 @@ static void __init omap_palmtt_init(void)
 
 	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
 	omap_serial_init();
-	omap_usb_init(&palmtt_usb_config);
+	omap1_usb_init(&palmtt_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
@@ -317,10 +317,9 @@ static void __init omap_palmtt_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_palmtt_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_palmtt_init_irq,
 	.init_machine	= omap_palmtt_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 6641de9257ef..d7a245cef9a4 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -325,7 +325,7 @@ omap_palmz71_init(void)
 
 	spi_register_board_info(palmz71_boardinfo,
 				ARRAY_SIZE(palmz71_boardinfo));
-	omap_usb_init(&palmz71_usb_config);
+	omap1_usb_init(&palmz71_usb_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	palmz71_gpio_setup(0);
@@ -338,10 +338,10 @@ omap_palmz71_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-	.phys_io = 0xfff00000,
-	.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
-	.boot_params = 0x10000100,.map_io = omap_palmz71_map_io,
-	.init_irq = omap_palmz71_init_irq,
-	.init_machine = omap_palmz71_init,
-	.timer = &omap_timer,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_palmz71_map_io,
+	.reserve	= omap_reserve,
+	.init_irq	= omap_palmz71_init_irq,
+	.init_machine	= omap_palmz71_init,
+	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index e854d5741c88..a8d16a255c18 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -260,6 +260,18 @@ static void __init omap_perseus2_init(void)
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(E2_7XX_KBR0);
+	omap_cfg_reg(J7_7XX_KBR1);
+	omap_cfg_reg(E1_7XX_KBR2);
+	omap_cfg_reg(F3_7XX_KBR3);
+	omap_cfg_reg(D2_7XX_KBR4);
+	omap_cfg_reg(C2_7XX_KBC0);
+	omap_cfg_reg(D3_7XX_KBC1);
+	omap_cfg_reg(E4_7XX_KBC2);
+	omap_cfg_reg(F4_7XX_KBC3);
+	omap_cfg_reg(E3_7XX_KBC4);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	omap_board_config = perseus2_config;
@@ -335,10 +347,9 @@ static void __init omap_perseus2_map_io(void)
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_perseus2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_perseus2_init_irq,
 	.init_machine	= omap_perseus2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 5b33ae8141bc..e8ddd86e3fda 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -44,8 +44,7 @@ static struct omap_mmc_platform_data mmc1_data = {
 	.nr_slots                       = 1,
 	.slots[0]       = {
 		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_28_29 | MMC_VDD_30_31 |
-					  MMC_VDD_32_33 | MMC_VDD_33_34,
+		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 2fb1e5f8e2ec..d25f59e5a773 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -392,7 +392,7 @@ static void __init omap_sx1_init(void)
 	omap_board_config_size = ARRAY_SIZE(sx1_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
-	omap_usb_init(&sx1_usb_config);
+	omap1_usb_init(&sx1_usb_config);
 	sx1_mmc_init();
 
 	/* turn on USB power */
@@ -419,11 +419,10 @@ static void __init omap_sx1_map_io(void)
 }
 
 MACHINE_START(SX1, "OMAP310 based Siemens SX1")
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_sx1_map_io,
-	.init_irq		= omap_sx1_init_irq,
+	.reserve	= omap_reserve,
+	.init_irq	= omap_sx1_init_irq,
 	.init_machine	= omap_sx1_init,
 	.timer		= &omap_timer,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 87b9436fe7c0..f5992c239bcd 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -198,7 +198,7 @@ static void __init voiceblue_init(void)
 	omap_board_config = voiceblue_config;
 	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
 	omap_serial_init();
-	omap_usb_init(&voiceblue_usb_config);
+	omap1_usb_init(&voiceblue_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
 	/* There is a good chance board is going up, so enable power LED
@@ -283,10 +283,9 @@ EXPORT_SYMBOL(voiceblue_wdt_ping);
 
 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	/* Maintainer: Ladislav Michl <michl@2n.cz> */
-	.phys_io	= 0xfff00000,
-	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= voiceblue_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= voiceblue_init_irq,
 	.init_machine	= voiceblue_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 6bbb1b8b8294..b8c7fb9d7921 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -11,7 +11,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/errno.h>
@@ -34,9 +33,9 @@
 __u32 arm_idlect1_mask;
 struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
-/*-------------------------------------------------------------------------
+/*
  * Omap1 specific clock functions
- *-------------------------------------------------------------------------*/
+ */
 
 unsigned long omap1_uart_recalc(struct clk *clk)
 {
@@ -523,7 +522,8 @@ const struct clkops clkops_dspck = {
 	.disable	= omap1_clk_disable_dsp_domain,
 };
 
-static int omap1_clk_enable_uart_functional(struct clk *clk)
+/* XXX SYSC register handling does not belong in the clock framework */
+static int omap1_clk_enable_uart_functional_16xx(struct clk *clk)
 {
 	int ret;
 	struct uart_clk *uclk;
@@ -539,7 +539,8 @@ static int omap1_clk_enable_uart_functional(struct clk *clk)
 	return ret;
 }
 
-static void omap1_clk_disable_uart_functional(struct clk *clk)
+/* XXX SYSC register handling does not belong in the clock framework */
+static void omap1_clk_disable_uart_functional_16xx(struct clk *clk)
 {
 	struct uart_clk *uclk;
 
@@ -550,9 +551,10 @@ static void omap1_clk_disable_uart_functional(struct clk *clk)
 	omap1_clk_disable_generic(clk);
 }
 
-const struct clkops clkops_uart = {
-	.enable		= omap1_clk_enable_uart_functional,
-	.disable	= omap1_clk_disable_uart_functional,
+/* XXX SYSC register handling does not belong in the clock framework */
+const struct clkops clkops_uart_16xx = {
+	.enable		= omap1_clk_enable_uart_functional_16xx,
+	.disable	= omap1_clk_disable_uart_functional_16xx,
 };
 
 long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
@@ -572,9 +574,9 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
 	return ret;
 }
 
-/*-------------------------------------------------------------------------
+/*
  * Omap1 clock reset and init functions
- *-------------------------------------------------------------------------*/
+ */
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 75d0d7d90bff..eaf09efb91ca 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -107,7 +107,7 @@ extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
 extern const struct clkops clkops_dspck;
 extern const struct clkops clkops_dummy;
-extern const struct clkops clkops_uart;
+extern const struct clkops clkops_uart_16xx;
 extern const struct clkops clkops_generic;
 
 #endif
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index aa8558adbf1c..af54114b8f08 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -8,6 +8,10 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * To do:
+ * - Clocks that are only available on some chips should be marked with the
+ *   chips that they are present on.
  */
 
 #include <linux/kernel.h>
@@ -23,9 +27,49 @@
 
 #include "clock.h"
 
-/*------------------------------------------------------------------------
+/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
+#define IDL_CLKOUT_ARM_SHIFT			12
+#define IDLTIM_ARM_SHIFT			9
+#define IDLAPI_ARM_SHIFT			8
+#define IDLIF_ARM_SHIFT				6
+#define IDLLB_ARM_SHIFT				4	/* undocumented? */
+#define OMAP1510_IDLLCD_ARM_SHIFT		3	/* undocumented? */
+#define IDLPER_ARM_SHIFT			2
+#define IDLXORP_ARM_SHIFT			1
+#define IDLWDT_ARM_SHIFT			0
+
+/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */
+#define CONF_MOD_UART3_CLK_MODE_R		31
+#define CONF_MOD_UART2_CLK_MODE_R		30
+#define CONF_MOD_UART1_CLK_MODE_R		29
+#define CONF_MOD_MMC_SD_CLK_REQ_R		23
+#define CONF_MOD_MCBSP3_AUXON			20
+
+/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */
+#define CONF_MOD_SOSSI_CLK_EN_R			16
+
+/* Some OTG_SYSCON_2-specific bit fields */
+#define OTG_SYSCON_2_UHOST_EN_SHIFT		8
+
+/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */
+#define SOFT_MMC2_DPLL_REQ_SHIFT	13
+#define SOFT_MMC_DPLL_REQ_SHIFT		12
+#define SOFT_UART3_DPLL_REQ_SHIFT	11
+#define SOFT_UART2_DPLL_REQ_SHIFT	10
+#define SOFT_UART1_DPLL_REQ_SHIFT	9
+#define SOFT_USB_OTG_DPLL_REQ_SHIFT	8
+#define SOFT_CAM_DPLL_REQ_SHIFT		7
+#define SOFT_COM_MCKO_REQ_SHIFT		6
+#define SOFT_PERIPH_REQ_SHIFT		5	/* sys_ck gate for UART2 ? */
+#define USB_REQ_EN_SHIFT		4
+#define SOFT_USB_REQ_SHIFT		3	/* sys_ck gate for USB host? */
+#define SOFT_SDW_REQ_SHIFT		2	/* sys_ck gate for Bluetooth? */
+#define SOFT_COM_REQ_SHIFT		1	/* sys_ck gate for com proc? */
+#define SOFT_DPLL_REQ_SHIFT		0
+
+/*
  * Omap1 clocks
- *-------------------------------------------------------------------------*/
+ */
 
 static struct clk ck_ref = {
 	.name		= "ck_ref",
@@ -54,7 +98,7 @@ static struct arm_idlect1_clk ck_dpll1out = {
 		.enable_bit	= EN_CKOUT_ARM,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 12,
+	.idlect_shift	= IDL_CLKOUT_ARM_SHIFT,
 };
 
 static struct clk sossi_ck = {
@@ -63,7 +107,7 @@ static struct clk sossi_ck = {
 	.parent		= &ck_dpll1out.clk,
 	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
-	.enable_bit	= 16,
+	.enable_bit	= CONF_MOD_SOSSI_CLK_EN_R,
 	.recalc		= &omap1_sossi_recalc,
 	.set_rate	= &omap1_set_sossi_rate,
 };
@@ -91,7 +135,7 @@ static struct arm_idlect1_clk armper_ck = {
 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
-	.idlect_shift	= 2,
+	.idlect_shift	= IDLPER_ARM_SHIFT,
 };
 
 /*
@@ -118,7 +162,7 @@ static struct arm_idlect1_clk armxor_ck = {
 		.enable_bit	= EN_XORPCK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 1,
+	.idlect_shift	= IDLXORP_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk armtim_ck = {
@@ -131,7 +175,7 @@ static struct arm_idlect1_clk armtim_ck = {
 		.enable_bit	= EN_TIMCK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 9,
+	.idlect_shift	= IDLTIM_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk armwdt_ck = {
@@ -145,7 +189,7 @@ static struct arm_idlect1_clk armwdt_ck = {
 		.fixed_div	= 14,
 		.recalc		= &omap_fixed_divisor_recalc,
 	},
-	.idlect_shift	= 0,
+	.idlect_shift	= IDLWDT_ARM_SHIFT,
 };
 
 static struct clk arminth_ck16xx = {
@@ -212,7 +256,6 @@ static struct clk dsptim_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
 static struct arm_idlect1_clk tc_ck = {
 	.clk = {
 		.name		= "tc_ck",
@@ -224,7 +267,7 @@ static struct arm_idlect1_clk tc_ck = {
 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
-	.idlect_shift	= 6,
+	.idlect_shift	= IDLIF_ARM_SHIFT,
 };
 
 static struct clk arminth_ck1510 = {
@@ -304,7 +347,7 @@ static struct arm_idlect1_clk api_ck = {
 		.enable_bit	= EN_APICK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 8,
+	.idlect_shift	= IDLAPI_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk lb_ck = {
@@ -317,7 +360,7 @@ static struct arm_idlect1_clk lb_ck = {
 		.enable_bit	= EN_LBCK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 4,
+	.idlect_shift	= IDLLB_ARM_SHIFT,
 };
 
 static struct clk rhea1_ck = {
@@ -359,9 +402,15 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
-	.idlect_shift	= 3,
+	.idlect_shift	= OMAP1510_IDLLCD_ARM_SHIFT,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
 static struct clk uart1_1510 = {
 	.name		= "uart1_ck",
 	.ops		= &clkops_null,
@@ -370,25 +419,37 @@ static struct clk uart1_1510 = {
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
+	.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX SYSC register handling does not belong in the clock framework
+ */
 static struct uart_clk uart1_16xx = {
 	.clk	= {
 		.name		= "uart1_ck",
-		.ops		= &clkops_uart,
+		.ops		= &clkops_uart_16xx,
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 29,
+		.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
 	},
 	.sysc_addr	= 0xfffb0054,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
 static struct clk uart2_ck = {
 	.name		= "uart2_ck",
 	.ops		= &clkops_null,
@@ -397,11 +458,17 @@ static struct clk uart2_ck = {
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
+	.enable_bit	= CONF_MOD_UART2_CLK_MODE_R,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
 static struct clk uart3_1510 = {
 	.name		= "uart3_ck",
 	.ops		= &clkops_null,
@@ -410,21 +477,27 @@ static struct clk uart3_1510 = {
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
+	.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX SYSC register handling does not belong in the clock framework
+ */
 static struct uart_clk uart3_16xx = {
 	.clk	= {
 		.name		= "uart3_ck",
-		.ops		= &clkops_uart,
+		.ops		= &clkops_uart_16xx,
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 31,
+		.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
 	},
 	.sysc_addr	= 0xfffb9854,
 };
@@ -457,7 +530,7 @@ static struct clk usb_hhc_ck16xx = {
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
 	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
-	.enable_bit	= 8 /* UHOST_EN */,
+	.enable_bit	= OTG_SYSCON_2_UHOST_EN_SHIFT
 };
 
 static struct clk usb_dc_ck = {
@@ -466,7 +539,7 @@ static struct clk usb_dc_ck = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 4,
+	.enable_bit	= USB_REQ_EN_SHIFT,
 };
 
 static struct clk usb_dc_ck7xx = {
@@ -475,7 +548,25 @@ static struct clk usb_dc_ck7xx = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 8,
+	.enable_bit	= SOFT_USB_OTG_DPLL_REQ_SHIFT,
+};
+
+static struct clk uart1_7xx = {
+	.name		= "uart1_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 9,
+};
+
+static struct clk uart2_7xx = {
+	.name		= "uart2_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 11,
 };
 
 static struct clk mclk_1510 = {
@@ -484,7 +575,7 @@ static struct clk mclk_1510 = {
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 6,
+	.enable_bit	= SOFT_COM_MCKO_REQ_SHIFT,
 };
 
 static struct clk mclk_16xx = {
@@ -524,9 +615,13 @@ static struct clk mmc1_ck = {
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 23,
+	.enable_bit	= CONF_MOD_MMC_SD_CLK_REQ_R,
 };
 
+/*
+ * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as
+ * CONF_MOD_MCBSP3_AUXON ??
+ */
 static struct clk mmc2_ck = {
 	.name		= "mmc2_ck",
 	.ops		= &clkops_generic,
@@ -546,7 +641,7 @@ static struct clk mmc3_ck = {
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 12,
+	.enable_bit	= SOFT_MMC_DPLL_REQ_SHIFT,
 };
 
 static struct clk virtual_ck_mpu = {
@@ -620,7 +715,9 @@ static struct omap_clk omap_clks[] = {
 	/* ULPD clocks */
 	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
+	CLK(NULL,	"uart1_ck",	&uart1_7xx,	CK_7XX),
 	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"uart2_ck",	&uart2_7xx,	CK_7XX),
 	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
 	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 379100c17639..ea0d80a89da7 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -9,6 +9,7 @@
  * (at your option) any later version.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -25,6 +26,7 @@
 #include <mach/gpio.h>
 #include <plat/mmc.h>
 #include <plat/omap7xx.h>
+#include <plat/mcbsp.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -63,44 +65,7 @@ static void omap_init_rtc(void)
 static inline void omap_init_rtc(void) {}
 #endif
 
-#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-#  define OMAP1_MBOX_SIZE	0x23
-#  define INT_DSP_MAILBOX1	INT_1510_DSP_MAILBOX1
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#  define OMAP1_MBOX_SIZE	0x2f
-#  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
-#endif
-
-#define OMAP1_MBOX_BASE		OMAP16XX_MAILBOX_BASE
-
-static struct resource mbox_resources[] = {
-	{
-		.start		= OMAP1_MBOX_BASE,
-		.end		= OMAP1_MBOX_BASE + OMAP1_MBOX_SIZE,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_DSP_MAILBOX1,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mbox_device = {
-	.name		= "omap1-mailbox",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mbox_resources),
-	.resource	= mbox_resources,
-};
-
-static inline void omap_init_mbox(void)
-{
-	platform_device_register(&mbox_device);
-}
-#else
 static inline void omap_init_mbox(void) { }
-#endif
 
 /*-------------------------------------------------------------------------*/
 
@@ -228,43 +193,74 @@ static inline void omap_init_spi100k(void)
 }
 #endif
 
-/*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_OMAP_STI)
+#define OMAP1_CAMERA_BASE	0xfffb6800
+#define OMAP1_CAMERA_IOSIZE	0x1c
 
-#define OMAP1_STI_BASE		0xfffea000
-#define OMAP1_STI_CHANNEL_BASE	(OMAP1_STI_BASE + 0x400)
-
-static struct resource sti_resources[] = {
-	{
-		.start		= OMAP1_STI_BASE,
-		.end		= OMAP1_STI_BASE + SZ_1K - 1,
-		.flags		= IORESOURCE_MEM,
+static struct resource omap1_camera_resources[] = {
+	[0] = {
+		.start	= OMAP1_CAMERA_BASE,
+		.end	= OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1,
+		.flags	= IORESOURCE_MEM,
 	},
-	{
-		.start		= OMAP1_STI_CHANNEL_BASE,
-		.end		= OMAP1_STI_CHANNEL_BASE + SZ_1K - 1,
-		.flags		= IORESOURCE_MEM,
+	[1] = {
+		.start	= INT_CAMERA,
+		.flags	= IORESOURCE_IRQ,
 	},
-	{
-		.start		= INT_1610_STI,
-		.flags		= IORESOURCE_IRQ,
-	}
 };
 
-static struct platform_device sti_device = {
-	.name		= "sti",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sti_resources),
-	.resource	= sti_resources,
+static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device omap1_camera_device = {
+	.name		= "omap1-camera",
+	.id		= 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask		= &omap1_camera_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(omap1_camera_resources),
+	.resource	= omap1_camera_resources,
+};
+
+void __init omap1_camera_init(void *info)
+{
+	struct platform_device *dev = &omap1_camera_device;
+	int ret;
+
+	dev->dev.platform_data = info;
+
+	ret = platform_device_register(dev);
+	if (ret)
+		dev_err(&dev->dev, "unable to register device: %d\n", ret);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline void omap_init_sti(void) {}
+
+#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
+
+static struct platform_device omap_pcm = {
+	.name	= "omap-pcm-audio",
+	.id	= -1,
 };
 
-static inline void omap_init_sti(void)
+OMAP_MCBSP_PLATFORM_DEVICE(1);
+OMAP_MCBSP_PLATFORM_DEVICE(2);
+OMAP_MCBSP_PLATFORM_DEVICE(3);
+
+static void omap_init_audio(void)
 {
-	platform_device_register(&sti_device);
+	platform_device_register(&omap_mcbsp1);
+	platform_device_register(&omap_mcbsp2);
+	if (!cpu_is_omap7xx())
+		platform_device_register(&omap_mcbsp3);
+	platform_device_register(&omap_pcm);
 }
+
 #else
-static inline void omap_init_sti(void) {}
+static inline void omap_init_audio(void) {}
 #endif
 
 /*-------------------------------------------------------------------------*/
@@ -299,8 +295,36 @@ static int __init omap1_init_devices(void)
 	omap_init_rtc();
 	omap_init_spi100k();
 	omap_init_sti();
+	omap_init_audio();
 
 	return 0;
 }
 arch_initcall(omap1_init_devices);
 
+#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+
+static struct resource wdt_resources[] = {
+	{
+		.start		= 0xfffeb000,
+		.end		= 0xfffeb07F,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_wdt_device = {
+	.name	   = "omap_wdt",
+	.id	     = -1,
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static int __init omap_init_wdt(void)
+{
+	if (!cpu_is_omap16xx())
+		return;
+
+	platform_device_register(&omap_wdt_device);
+	return 0;
+}
+subsys_initcall(omap_init_wdt);
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/include/mach/camera.h
new file mode 100644
index 000000000000..fd54b452eb22
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/camera.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+void omap1_camera_init(void *);
+
+static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)
+{
+	omap1_camera_init(info);
+}
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index e8a8cf36b7f0..6a0fa0462365 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -28,52 +28,58 @@ omap_uart_virt:	.word	0x0
 		 * the desired UART phys and virt addresses temporarily into
 		 * the omap_uart_phys and omap_uart_virt above.
 		 */
-		.macro	addruart, rx, tmp
+		.macro	addruart, rp, rv
 
 		/* Use omap_uart_phys/virt if already configured */
-9:		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =omap_uart_phys	@ physical base address
-		ldrne	\rx, =omap_uart_virt	@ virtual base
-		ldr	\rx, [\rx, #0]
-		cmp	\rx, #0			@ is port configured?
+9:		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rp, =omap_uart_phys	@ MMU enabled
+		add	\rv, \rp, #4		@ omap_uart_virt
+		ldr	\rp, [\rp, #0]
+		ldr	\rv, [\rv, #0]
+		cmp	\rp, #0			@ is port configured?
+		cmpne	\rv, #0
 		bne	99f			@ already configured
 
 		/* Check the debug UART configuration set in uncompress.h */
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =OMAP_UART_INFO
-		ldrne	\rx, =__phys_to_virt(OMAP_UART_INFO)
-		ldr	\rx, [\rx, #0]
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =OMAP_UART_INFO	@ MMU not enabled
+		ldrne	\rp, =__phys_to_virt(OMAP_UART_INFO)	@ MMU enabled
+		ldr	\rp, [\rp, #0]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
-10:		cmp	\rx, #0			@ no port configured?
+10:		cmp	\rp, #0			@ no port configured?
 		beq	11f			@ if none, try to use UART1
-		cmp	\rx, #OMAP1UART1
+		cmp	\rp, #OMAP1UART1
 		beq	11f			@ configure OMAP1UART1
-		cmp	\rx, #OMAP1UART2
+		cmp	\rp, #OMAP1UART2
 		beq	12f			@ configure OMAP1UART2
-		cmp	\rx, #OMAP1UART3
+		cmp	\rp, #OMAP1UART3
 		beq	13f			@ configure OMAP2UART3
 
 		/* Configure the UART offset from the phys/virt base */
-11:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+11:		mov	\rp, #0x00fb0000	@ OMAP1UART1
 		b	98f
-12:		mov	\rx, #0x00fb0000	@ OMAP1UART1
-		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
+12:		mov	\rp, #0x00fb0000	@ OMAP1UART1
+		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
 		b	98f
-13:		mov	\rx, #0x00fb0000	@ OMAP1UART1
-		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
-		orr	\rx, \rx, #0x00009000	@ OMAP1UART3
+13:		mov	\rp, #0x00fb0000	@ OMAP1UART1
+		orr	\rp, \rp, #0x00000800	@ OMAP1UART2
+		orr	\rp, \rp, #0x00009000	@ OMAP1UART3
 
 		/* Store both phys and virt address for the uart */
-98:		add	\rx, \rx, #0xff000000	@ phys base
-		ldr	\tmp, =omap_uart_phys
-		str	\rx, [\tmp, #0]
-		sub	\rx, \rx, #0xff000000	@ phys base
-		add	\rx, \rx, #0xfe000000	@ virt base
-		ldr	\tmp, =omap_uart_virt
-		str	\rx, [\tmp, #0]
+98:		add	\rp, \rp, #0xff000000	@ phys base
+		mrc	p15, 0, \rv, c1, c0
+		tst	\rv, #1			@ MMU enabled?
+		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rv, =omap_uart_phys	@ MMU enabled
+		str	\rp, [\rv, #0]
+		sub	\rp, \rp, #0xff000000	@ phys base
+		add	\rp, \rp, #0xfe000000	@ virt base
+		add	\rv, \rv, #4		@ omap_uart_lsr
+		str	\rp, [\rv, #0]
 		b	9b
 99:
 		.endm
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
index 1b2af14df151..b001f67d695b 100644
--- a/arch/arm/mach-omap1/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap1/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	(PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END	0xd8000000
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index d9b8d82530ae..0ce3fec2d257 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -22,7 +22,6 @@
 
 extern void omap_check_revision(void);
 extern void omap_sram_init(void);
-extern void omapfb_reserve_sdram(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -122,7 +121,6 @@ void __init omap1_map_common_io(void)
 #endif
 
 	omap_sram_init();
-	omapfb_reserve_sdram();
 }
 
 /*
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 4f5b3da3d559..1a85a421007f 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -1,5 +1,5 @@
 /*
- * Mailbox reservation modules for DSP
+ * Mailbox reservation modules for OMAP1
  *
  * Copyright (C) 2006-2009 Nokia Corporation
  * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
@@ -9,13 +9,10 @@
  * for more details.
  */
 
-#include <linux/kernel.h>
-#include <linux/resource.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <plat/mailbox.h>
-#include <mach/irqs.h>
 
 #define MAILBOX_ARM2DSP1		0x00
 #define MAILBOX_ARM2DSP1b		0x04
@@ -83,7 +80,7 @@ static int omap1_mbox_fifo_full(struct omap_mbox *mbox)
 	struct omap_mbox1_fifo *fifo =
 		&((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
 
-	return (mbox_read_reg(fifo->flag));
+	return mbox_read_reg(fifo->flag);
 }
 
 /* irq */
@@ -141,47 +138,37 @@ struct omap_mbox mbox_dsp_info = {
 	.ops	= &omap1_mbox_ops,
 	.priv	= &omap1_mbox_dsp_priv,
 };
-EXPORT_SYMBOL(mbox_dsp_info);
+
+struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
 
 static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 {
-	struct resource *res;
+	struct resource *mem;
+	int ret;
+	int i;
+	struct omap_mbox **list;
 
-	if (pdev->num_resources != 2) {
-		dev_err(&pdev->dev, "invalid number of resources: %d\n",
-			pdev->num_resources);
-		return -ENODEV;
-	}
+	list = omap1_mboxes;
+	list[0]->irq = platform_get_irq_byname(pdev, "dsp");
 
-	/* MBOX base */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid mem resource\n");
-		return -ENODEV;
-	}
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mbox_base = ioremap(mem->start, resource_size(mem));
+	if (!mbox_base)
+		return -ENOMEM;
 
-	mbox_base = ioremap(res->start, resource_size(res));
-	if (!mbox_base) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		return -ENODEV;
-	}
-
-	/* DSP IRQ */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid irq resource\n");
+	ret = omap_mbox_register(&pdev->dev, list);
+	if (ret) {
 		iounmap(mbox_base);
-		return -ENODEV;
+		return ret;
 	}
-	mbox_dsp_info.irq = res->start;
 
-	return omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+	return 0;
 }
 
 static int __devexit omap1_mbox_remove(struct platform_device *pdev)
 {
-	omap_mbox_unregister(&mbox_dsp_info);
-
+	omap_mbox_unregister();
+	iounmap(mbox_base);
 	return 0;
 }
 
@@ -189,7 +176,7 @@ static struct platform_driver omap1_mbox_driver = {
 	.probe	= omap1_mbox_probe,
 	.remove	= __devexit_p(omap1_mbox_remove),
 	.driver	= {
-		.name	= "omap1-mailbox",
+		.name	= "omap-mailbox",
 	},
 };
 
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index e9bdff192f82..b3a796a6da03 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -23,7 +23,6 @@
 #include <plat/mux.h>
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>
-#include <plat/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
@@ -46,7 +45,6 @@ static void omap1_mcbsp_request(unsigned int id)
 				clk_enable(api_clk);
 				clk_enable(dsp_clk);
 
-				omap_dsp_request_mem();
 				/*
 				 * DSP external peripheral reset
 				 * FIXME: This should be moved to dsp code
@@ -62,7 +60,6 @@ static void omap1_mcbsp_free(unsigned int id)
 {
 	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
 		if (--dsp_use == 0) {
-			omap_dsp_release_mem();
 			if (!IS_ERR(api_clk)) {
 				clk_disable(api_clk);
 				clk_put(api_clk);
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 84341377232d..7835add00344 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -70,6 +70,10 @@ MUX_CFG_7XX("SPI_7XX_3",           6,   13,    4,   12,   1, 0)
 MUX_CFG_7XX("SPI_7XX_4",           6,   17,    4,   16,   1, 0)
 MUX_CFG_7XX("SPI_7XX_5",           8,   25,    0,   24,   0, 0)
 MUX_CFG_7XX("SPI_7XX_6",           9,    5,    0,    4,   0, 0)
+
+/* UART pins */
+MUX_CFG_7XX("UART_7XX_1",          3,   21,    0,   20,   0, 0)
+MUX_CFG_7XX("UART_7XX_2",          8,    1,    6,    0,   0, 0)
 };
 #define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
 #else
@@ -440,7 +444,7 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 	}
 #endif
 
-#ifdef CONFIG_OMAP_MUX_ERRORS
+#ifdef CONFIG_OMAP_MUX_WARNINGS
 	return warn ? -ETXTBSY : 0;
 #else
 	return 0;
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
new file mode 100644
index 000000000000..8b66392be745
--- /dev/null
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -0,0 +1,98 @@
+/*
+ * Runtime PM support code for OMAP1
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
+
+#ifdef CONFIG_PM_RUNTIME
+static int omap1_pm_runtime_suspend(struct device *dev)
+{
+	struct clk *iclk, *fclk;
+	int ret = 0;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	ret = pm_generic_runtime_suspend(dev);
+
+	fclk = clk_get(dev, "fck");
+	if (!IS_ERR(fclk)) {
+		clk_disable(fclk);
+		clk_put(fclk);
+	}
+
+	iclk = clk_get(dev, "ick");
+	if (!IS_ERR(iclk)) {
+		clk_disable(iclk);
+		clk_put(iclk);
+	}
+
+	return 0;
+};
+
+static int omap1_pm_runtime_resume(struct device *dev)
+{
+	int ret = 0;
+	struct clk *iclk, *fclk;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	iclk = clk_get(dev, "ick");
+	if (!IS_ERR(iclk)) {
+		clk_enable(iclk);
+		clk_put(iclk);
+	}
+
+	fclk = clk_get(dev, "fck");
+	if (!IS_ERR(fclk)) {
+		clk_enable(fclk);
+		clk_put(fclk);
+	}
+
+	return pm_generic_runtime_resume(dev);
+};
+
+static int __init omap1_pm_runtime_init(void)
+{
+	const struct dev_pm_ops *pm;
+	struct dev_pm_ops *omap_pm;
+
+	pm = platform_bus_get_pm_ops();
+	if (!pm) {
+		pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
+	if (!omap_pm) {
+		pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	omap_pm->runtime_suspend = omap1_pm_runtime_suspend;
+	omap_pm->runtime_resume = omap1_pm_runtime_resume;
+
+	platform_bus_set_pm_ops(omap_pm);
+
+	return 0;
+}
+core_initcall(omap1_pm_runtime_init);
+#endif /* CONFIG_PM_RUNTIME */
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 349de90194e3..b78d0749f13d 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -122,6 +122,13 @@ void __init omap_serial_init(void)
 
 	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
 
+		/* Don't look at UARTs higher than 2 for omap7xx */
+		if (cpu_is_omap7xx() && i > 1) {
+			serial_platform_data[i].membase = NULL;
+			serial_platform_data[i].mapbase = 0;
+			continue;
+		}
+
 		/* Static mapping, never released */
 		serial_platform_data[i].membase =
 			ioremap(serial_platform_data[i].mapbase, SZ_2K);
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
new file mode 100644
index 000000000000..19de03b074e3
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.c
@@ -0,0 +1,530 @@
+/*
+ * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+
+#include <plat/mux.h>
+#include <plat/usb.h>
+
+/* These routines should handle the standard chip-specific modes
+ * for usb0/1/2 ports, covering basic mux and transceiver setup.
+ *
+ * Some board-*.c files will need to set up additional mux options,
+ * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
+ */
+
+/* TESTED ON:
+ *  - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
+ *  - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
+ *  - 5912 OSK UDC, with *nonstandard* A-to-A cable
+ *  - 1510 Innovator UDC with bundled usb0 cable
+ *  - 1510 Innovator OHCI with bundled usb1/usb2 cable
+ *  - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
+ *  - 1710 custom development board using alternate pin group
+ *  - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
+ */
+
+#define INT_USB_IRQ_GEN		IH2_BASE + 20
+#define INT_USB_IRQ_NISO	IH2_BASE + 30
+#define INT_USB_IRQ_ISO		IH2_BASE + 29
+#define INT_USB_IRQ_HGEN	INT_USB_HHC_1
+#define INT_USB_IRQ_OTG		IH2_BASE + 8
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+
+static struct resource udc_resources[] = {
+	/* order is significant! */
+	{		/* registers */
+		.start		= UDC_BASE,
+		.end		= UDC_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {		/* general IRQ */
+		.start		= INT_USB_IRQ_GEN,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* PIO IRQ */
+		.start		= INT_USB_IRQ_NISO,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* SOF IRQ */
+		.start		= INT_USB_IRQ_ISO,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device udc_device = {
+	.name		= "omap_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &udc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(udc_resources),
+	.resource	= udc_resources,
+};
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+	/* IRQ numbers for omap7xx */
+	if(cpu_is_omap7xx()) {
+		udc_resources[1].start = INT_7XX_USB_GENI;
+		udc_resources[2].start = INT_7XX_USB_NON_ISO;
+		udc_resources[3].start = INT_7XX_USB_ISO;
+	}
+	pdata->udc_device = &udc_device;
+}
+
+#else
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static struct resource ohci_resources[] = {
+	{
+		.start	= OMAP_OHCI_BASE,
+		.end	= OMAP_OHCI_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_IRQ_HGEN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci_device = {
+	.name			= "ohci",
+	.id			= -1,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(ohci_resources),
+	.resource		= ohci_resources,
+};
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+	if (cpu_is_omap7xx())
+		ohci_resources[1].start = INT_7XX_USB_HHC_1;
+	pdata->ohci_device = &ohci_device;
+}
+
+#else
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
+
+static struct resource otg_resources[] = {
+	/* order is significant! */
+	{
+		.start		= OTG_BASE,
+		.end		= OTG_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= INT_USB_IRQ_OTG,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device otg_device = {
+	.name		= "omap_otg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+	.resource	= otg_resources,
+};
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+	if (cpu_is_omap7xx())
+		otg_resources[1].start = INT_7XX_USB_OTG;
+	pdata->otg_device = &otg_device;
+}
+
+#else
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
+{
+	u32	syscon1 = 0;
+
+	if (nwires == 0) {
+		if (!cpu_is_omap15xx()) {
+			u32 l;
+
+			/* pulldown D+/D- */
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		return 0;
+	}
+
+	if (is_device) {
+		if (cpu_is_omap7xx()) {
+			omap_cfg_reg(AA17_7XX_USB_DM);
+			omap_cfg_reg(W16_7XX_USB_PU_EN);
+			omap_cfg_reg(W17_7XX_USB_VBUSI);
+			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
+			omap_cfg_reg(W19_7XX_USB_DCRST);
+		} else
+			omap_cfg_reg(W4_USB_PUEN);
+	}
+
+	if (nwires == 2) {
+		u32 l;
+
+		// omap_cfg_reg(P9_USB_DP);
+		// omap_cfg_reg(R8_USB_DM);
+
+		if (cpu_is_omap15xx()) {
+			/* This works on 1510-Innovator */
+			return 0;
+		}
+
+		/* NOTES:
+		 *  - peripheral should configure VBUS detection!
+		 *  - only peripherals may use the internal D+/D- pulldowns
+		 *  - OTG support on this port not yet written
+		 */
+
+		/* Don't do this for omap7xx -- it causes USB to not work correctly */
+		if (!cpu_is_omap7xx()) {
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(7 << 4);
+			if (!is_device)
+				l |= (3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+
+		return 3 << 16;
+	}
+
+	/* alternate pin config, external transceiver */
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
+		return 0;
+	}
+
+	omap_cfg_reg(V6_USB0_TXD);
+	omap_cfg_reg(W9_USB0_TXEN);
+	omap_cfg_reg(W5_USB0_SE0);
+	if (nwires != 3)
+		omap_cfg_reg(Y5_USB0_RCV);
+
+	/* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
+	 * may be able to use I2C requests to set those bits along
+	 * with VBUS switching and overcurrent detection.
+	 */
+
+	if (nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB2_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+
+	switch (nwires) {
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 6:
+		syscon1 = 3;
+		{
+			u32 l;
+
+			omap_cfg_reg(AA9_USB0_VP);
+			omap_cfg_reg(R9_USB0_VM);
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB2_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			0, nwires);
+	}
+
+	return syscon1 << 16;
+}
+
+u32 __init omap1_usb1_init(unsigned nwires)
+{
+	u32	syscon1 = 0;
+
+	if (!cpu_is_omap15xx() && nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB1_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+	if (nwires == 0)
+		return 0;
+
+	/* external transceiver */
+	omap_cfg_reg(USB1_TXD);
+	omap_cfg_reg(USB1_TXEN);
+	if (nwires != 3)
+		omap_cfg_reg(USB1_RCV);
+
+	if (cpu_is_omap15xx()) {
+		omap_cfg_reg(USB1_SEO);
+		omap_cfg_reg(USB1_SPEED);
+		// SUSP
+	} else if (cpu_is_omap1610() || cpu_is_omap5912()) {
+		omap_cfg_reg(W13_1610_USB1_SE0);
+		omap_cfg_reg(R13_1610_USB1_SPEED);
+		// SUSP
+	} else if (cpu_is_omap1710()) {
+		omap_cfg_reg(R13_1710_USB1_SE0);
+		// SUSP
+	} else {
+		pr_debug("usb%d cpu unrecognized\n", 1);
+		return 0;
+	}
+
+	switch (nwires) {
+	case 2:
+		goto bad;
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 6:
+		syscon1 = 3;
+		omap_cfg_reg(USB1_VP);
+		omap_cfg_reg(USB1_VM);
+		if (!cpu_is_omap15xx()) {
+			u32 l;
+
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB1_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+bad:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			1, nwires);
+	}
+
+	return syscon1 << 20;
+}
+
+u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+	u32	syscon1 = 0;
+
+	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
+	if (alt_pingroup || nwires == 0)
+		return 0;
+
+	if (!cpu_is_omap15xx() && nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB2_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+
+	/* external transceiver */
+	if (cpu_is_omap15xx()) {
+		omap_cfg_reg(USB2_TXD);
+		omap_cfg_reg(USB2_TXEN);
+		omap_cfg_reg(USB2_SEO);
+		if (nwires != 3)
+			omap_cfg_reg(USB2_RCV);
+		/* there is no USB2_SPEED */
+	} else if (cpu_is_omap16xx()) {
+		omap_cfg_reg(V6_USB2_TXD);
+		omap_cfg_reg(W9_USB2_TXEN);
+		omap_cfg_reg(W5_USB2_SE0);
+		if (nwires != 3)
+			omap_cfg_reg(Y5_USB2_RCV);
+		// FIXME omap_cfg_reg(USB2_SPEED);
+	} else {
+		pr_debug("usb%d cpu unrecognized\n", 1);
+		return 0;
+	}
+
+	// omap_cfg_reg(USB2_SUSP);
+
+	switch (nwires) {
+	case 2:
+		goto bad;
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 5:
+		goto bad;
+	case 6:
+		syscon1 = 3;
+		if (cpu_is_omap15xx()) {
+			omap_cfg_reg(USB2_VP);
+			omap_cfg_reg(USB2_VM);
+		} else {
+			u32 l;
+
+			omap_cfg_reg(AA9_USB2_VP);
+			omap_cfg_reg(R9_USB2_VM);
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB2_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+bad:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			2, nwires);
+	}
+
+	return syscon1 << 24;
+}
+
+#ifdef	CONFIG_ARCH_OMAP15XX
+
+/* ULPD_DPLL_CTRL */
+#define DPLL_IOB		(1 << 13)
+#define DPLL_PLL_ENABLE		(1 << 4)
+#define DPLL_LOCK		(1 << 0)
+
+/* ULPD_APLL_CTRL */
+#define APLL_NDPLL_SWITCH	(1 << 0)
+
+static void __init omap_1510_usb_init(struct omap_usb_config *config)
+{
+	unsigned int val;
+	u16 w;
+
+	config->usb0_init(config->pins[0], is_usb0_device(config));
+	config->usb1_init(config->pins[1]);
+	config->usb2_init(config->pins[2], 0);
+
+	val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
+	val |= (config->hmc_mode << 1);
+	omap_writel(val, MOD_CONF_CTRL_0);
+
+	printk("USB: hmc %d", config->hmc_mode);
+	if (config->pins[0])
+		printk(", usb0 %d wires%s", config->pins[0],
+			is_usb0_device(config) ? " (dev)" : "");
+	if (config->pins[1])
+		printk(", usb1 %d wires", config->pins[1]);
+	if (config->pins[2])
+		printk(", usb2 %d wires", config->pins[2]);
+	printk("\n");
+
+	/* use DPLL for 48 MHz function clock */
+	pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
+			omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
+
+	w = omap_readw(ULPD_APLL_CTRL);
+	w &= ~APLL_NDPLL_SWITCH;
+	omap_writew(w, ULPD_APLL_CTRL);
+
+	w = omap_readw(ULPD_DPLL_CTRL);
+	w |= DPLL_IOB | DPLL_PLL_ENABLE;
+	omap_writew(w, ULPD_DPLL_CTRL);
+
+	w = omap_readw(ULPD_SOFT_REQ);
+	w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
+	omap_writew(w, ULPD_SOFT_REQ);
+
+	while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
+		cpu_relax();
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+	if (config->register_dev) {
+		int status;
+
+		udc_device.dev.platform_data = config;
+		status = platform_device_register(&udc_device);
+		if (status)
+			pr_debug("can't register UDC device, %d\n", status);
+		/* udc driver gates 48MHz by D+ pullup */
+	}
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	if (config->register_host) {
+		int status;
+
+		ohci_device.dev.platform_data = config;
+		status = platform_device_register(&ohci_device);
+		if (status)
+			pr_debug("can't register OHCI device, %d\n", status);
+		/* hcd explicitly gates 48MHz */
+	}
+#endif
+}
+
+#else
+static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
+#endif
+
+void __init omap1_usb_init(struct omap_usb_config *pdata)
+{
+	pdata->usb0_init = omap1_usb0_init;
+	pdata->usb1_init = omap1_usb1_init;
+	pdata->usb2_init = omap1_usb2_init;
+	udc_device_init(pdata);
+	ohci_device_init(pdata);
+	otg_device_init(pdata);
+
+	if (cpu_is_omap7xx() || cpu_is_omap16xx())
+		omap_otg_init(pdata);
+	else if (cpu_is_omap15xx())
+		omap_1510_usb_init(pdata);
+	else
+		printk(KERN_ERR "USB: No init for your chip yet\n");
+}
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b31b6f123122..ab784bfde908 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,22 +1,78 @@
+if ARCH_OMAP2PLUS
+
+menu "TI OMAP2/3/4 Specific Features"
+
+config ARCH_OMAP2PLUS_TYPICAL
+	bool "Typical OMAP configuration"
+	default y
+	select AEABI
+	select REGULATOR
+	select PM
+	select PM_RUNTIME
+	select VFP
+	select NEON if ARCH_OMAP3 || ARCH_OMAP4
+	select SERIAL_OMAP
+	select SERIAL_OMAP_CONSOLE
+	select I2C
+	select I2C_OMAP
+	select MFD
+	select MENELAUS if ARCH_OMAP2
+	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
+	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
+	help
+	  Compile a kernel suitable for booting most boards
+
+config ARCH_OMAP2
+	bool "TI OMAP2"
+	depends on ARCH_OMAP2PLUS
+	default y
+	select CPU_V6
+
+config ARCH_OMAP3
+	bool "TI OMAP3"
+	depends on ARCH_OMAP2PLUS
+	default y
+	select CPU_V7
+	select USB_ARCH_HAS_EHCI
+	select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4
+
+config ARCH_OMAP4
+	bool "TI OMAP4"
+	default y
+	depends on ARCH_OMAP2PLUS
+	select CPU_V7
+	select ARM_GIC
+	select PL310_ERRATA_588369
+	select ARM_ERRATA_720789
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
 config ARCH_OMAP2420
 	bool "OMAP2420 support"
 	depends on ARCH_OMAP2
+	default y
 	select OMAP_DM_TIMER
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
+	default y
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP3430
 	bool "OMAP3430 support"
 	depends on ARCH_OMAP3
+	default y
 	select ARCH_OMAP_OTG
 
+config OMAP_PACKAGE_ZAF
+       bool
+
+config OMAP_PACKAGE_ZAC
+       bool
+
 config OMAP_PACKAGE_CBC
        bool
 
@@ -35,6 +91,7 @@ comment "OMAP Board Type"
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP2
+	default y
 
 config MACH_OMAP2_TUSB6010
 	bool
@@ -43,61 +100,96 @@ config MACH_OMAP2_TUSB6010
 
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
-	depends on ARCH_OMAP2
+	depends on ARCH_OMAP2420
+	default y
+	select OMAP_PACKAGE_ZAF
 	select OMAP_DEBUG_DEVICES
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
-	depends on ARCH_OMAP2
+	depends on ARCH_OMAP2420
+	default y
+	select OMAP_PACKAGE_ZAC
 
 config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
-	depends on ARCH_OMAP2
+	depends on ARCH_OMAP2430
+	default y
+	select OMAP_PACKAGE_ZAC
 
 config MACH_OMAP3_BEAGLE
 	bool "OMAP3 BEAGLE board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_DEVKIT8000
 	bool "DEVKIT8000 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
 config MACH_OMAP_LDP
 	bool "OMAP3 LDP board"
 	depends on ARCH_OMAP3
+	default y
+	select OMAP_PACKAGE_CBB
+
+config MACH_OMAP3530_LV_SOM
+	bool "OMAP3 Logic 3530 LV SOM board"
+	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
+	default y
+	help
+	 Support for the LogicPD OMAP3530 SOM Development kit
+	 for full description please see the products webpage at
+	 http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit
+
+config MACH_OMAP3_TORPEDO
+	bool "OMAP3 Logic 35x Torpedo board"
+	depends on ARCH_OMAP3
+	select OMAP_PACKAGE_CBB
+	default y
+	help
+	 Support for the LogicPD OMAP35x Torpedo Development kit
+	 for full description please see the products webpage at
+	 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
 
 config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3EVM
 	bool "OMAP 3530 EVM board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_TOUCHBOOK
 	bool "OMAP3 Touch Book"
 	depends on ARCH_OMAP3
+	default y
 	select BACKLIGHT_CLASS_DEVICE
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_N800
@@ -112,6 +204,8 @@ config MACH_NOKIA_N810_WIMAX
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
 	depends on ARCH_OMAP2420
+	default y
+	select OMAP_PACKAGE_ZAC
 	select MACH_NOKIA_N800
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
@@ -119,42 +213,74 @@ config MACH_NOKIA_N8X0
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM2
 	bool "OMAP3 Zoom2 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
+	select SERIAL_8250
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_8250_CONSOLE
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBP
+	select SERIAL_8250
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_8250_CONSOLE
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35 module"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
+config MACH_CM_T3517
+	bool "CompuLab CM-T3517 module"
+	depends on ARCH_OMAP3
+	default y
+	select OMAP_PACKAGE_CBB
+	select OMAP_MUX
+
 config MACH_IGEP0020
 	bool "IGEP v2 board"
 	depends on ARCH_OMAP3
+	default y
+	select OMAP_PACKAGE_CBB
+
+config MACH_IGEP0030
+	bool "IGEP OMAP3 module"
+	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_SBC3530
 	bool "OMAP3 SBC STALKER board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
 config MACH_OMAP_3630SDP
 	bool "OMAP3630 SDP board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBP
 
 config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
+	default y
+	depends on ARCH_OMAP4
+
+config MACH_OMAP4_PANDA
+	bool "OMAP4 Panda Board"
+	default y
 	depends on ARCH_OMAP4
 
 config OMAP3_EMU
@@ -176,3 +302,6 @@ config OMAP3_SDRC_AC_TIMING
 	  wish to say no.  Selecting yes without understanding what is
 	  going on could result in system crashes;
 
+endmenu
+
+endif
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ea52b034e963..60e51bcf53bd 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,9 +3,10 @@
 #
 
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
+	 common.o
 
-omap-2-3-common				= irq.o sdrc.o
+omap-2-3-common				= irq.o sdrc.o prm2xxx_3xxx.o
 hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o
 prcm-common				= prcm.o powerdomain.o
@@ -15,15 +16,17 @@ clock-common				= clock.o clock_common_data.o \
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) prm44xx.o $(hwmod-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
+obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o
 
+AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a
 AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a
 
 # Functions loaded to SRAM
@@ -36,6 +39,8 @@ AFLAGS_sram243x.o			:=-Wa,-march=armv6
 AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 
 # Pin multiplexing
+obj-$(CONFIG_ARCH_OMAP2420)		+= mux2420.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= mux2430.o
 obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
 
 # SMS/SDRC
@@ -45,13 +50,18 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o pm_bus.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a
 
+ifeq ($(CONFIG_PM_VERBOSE),y)
+CFLAGS_pm_bus.o				+= -DDEBUG
+endif
+
 endif
 
 # PRCM
@@ -82,6 +92,7 @@ obj-$(CONFIG_ARCH_OMAP2430)		+= opp2430_data.o
 obj-$(CONFIG_ARCH_OMAP2420)		+= omap_hwmod_2420_data.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= omap_hwmod_2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 
 # EMU peripherals
 obj-$(CONFIG_OMAP3_EMU)			+= emu.o
@@ -89,11 +100,18 @@ obj-$(CONFIG_OMAP3_EMU)			+= emu.o
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o
 
-obj-$(CONFIG_OMAP_IOMMU)		:= iommu2.o omap-iommu.o
+obj-$(CONFIG_OMAP_IOMMU)		+= iommu2.o
+
+iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o
+obj-y					+= $(iommu-m) $(iommu-y)
 
 i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
 obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
 
+ifneq ($(CONFIG_TIDSPBRIDGE),)
+obj-y					+= dsp.o
+endif
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
@@ -105,6 +123,11 @@ obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
 obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
                                            hsmmc.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
+					   board-flash.o \
+					   hsmmc.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o \
+					   hsmmc.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   hsmmc.o
@@ -114,7 +137,7 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   hsmmc.o \
-					   board-sdp-flash.o
+					   board-flash.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-sdram.o \
@@ -123,29 +146,39 @@ obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
 					   board-zoom-peripherals.o \
+					   board-flash.o \
 					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
 					   board-zoom-peripherals.o \
+					   board-flash.o \
 					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
 					   board-zoom-peripherals.o \
+					   board-flash.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
 					   hsmmc.o
+obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
 					   hsmmc.o
+obj-$(CONFIG_MACH_IGEP0030)		+= board-igep0030.o \
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
 					   hsmmc.o
+obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
+					   hsmmc.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
 					   hsmmc.o
 # Platform specific device init code
+usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
+obj-y					+= $(usbfs-m) $(usbfs-y)
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 obj-y					+= usb-ehci.o
@@ -158,3 +191,6 @@ obj-y					+= $(nand-m) $(nand-y)
 
 smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
 obj-y					+= $(smc91x-m) $(smc91x-y)
+
+smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
+obj-y					+= $(smsc911x-m) $(smsc911x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index a11a575745e4..b527f8d187ad 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mmc/host.h>
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
 #include <linux/err.h>
@@ -31,13 +32,13 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <plat/mux.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <plat/gpmc-smc91x.h>
 
+#include "mux.h"
 #include "hsmmc.h"
 
 #define SDP2430_CS0_BASE	0x04000000
@@ -122,11 +123,7 @@ static struct omap_smc91x_platform_data board_smc91x_data = {
 
 static void __init board_smc91x_init(void)
 {
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		board_smc91x_data.gpio_irq = 6;
-	else
-		board_smc91x_data.gpio_irq = 29;
-
+	omap_mux_init_gpio(149, OMAP_PIN_INPUT);
 	gpmc_smc91x_init(&board_smc91x_data);
 }
 
@@ -194,7 +191,7 @@ static int __init omap2430_i2c_init(void)
 static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.mmc		= 1,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 		.ext_clock	= 1,
@@ -217,17 +214,30 @@ static struct omap_usb_config sdp2430_usb_config __initdata = {
 	.pins[0]	= 3,
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_2430sdp_init(void)
 {
 	int ret;
 
+	omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
 	omap2_hsmmc_init(mmc);
-	omap_usb_init(&sdp2430_usb_config);
+	omap2_usbfs_init(&sdp2430_usb_config);
+
+	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
 	usb_musb_init(&musb_board_data);
+
 	board_smc91x_init();
 
 	/* Turn off secondary LCD backlight */
@@ -244,10 +254,9 @@ static void __init omap_2430sdp_map_io(void)
 
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_2430sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_2430sdp_init_irq,
 	.init_machine	= omap_2430sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index f474a80b8867..4e3742c512b8 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -24,6 +24,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -38,15 +39,14 @@
 #include <plat/gpmc.h>
 #include <plat/display.h>
 
-#include <plat/control.h>
 #include <plat/gpmc-smc91x.h>
 
-#include <mach/board-sdp.h>
-
+#include "board-flash.h"
 #include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "hsmmc.h"
 #include "pm.h"
+#include "control.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
@@ -76,7 +76,7 @@ static struct cpuidle_params omap3_cpuidle_params_table[] = {
 	{1, 10000, 30000, 300000},
 };
 
-static int board_keymap[] = {
+static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_A),
@@ -353,12 +353,12 @@ static struct omap2_hsmmc_info mmc[] = {
 		/* 8 bits (default) requires S6.3 == ON,
 		 * so the SIM card isn't used; else 4 bits.
 		 */
-		.wires		= 8,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 4,
 	},
 	{
 		.mmc		= 2,
-		.wires		= 8,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 7,
 	},
 	{}	/* Terminator */
@@ -667,6 +667,18 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+/*
+ * SDP3430 V2 Board CS organization
+ * Different from SDP3430 V1. Now 4 switches used to specify CS
+ *
+ * See also the Switch S8 settings in the comments.
+ */
+static char chip_sel_3430[][GPMC_CS_NUM] = {
+	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
+	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
+	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
+};
+
 static struct mtd_partition sdp_nor_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -797,24 +809,17 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
-	sdp_flash_init(sdp_flash_partitions);
+	board_flash_init(sdp_flash_partitions, chip_sel_3430);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);
 }
 
-static void __init omap_3430sdp_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_3430sdp_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_3430sdp_init_irq,
 	.init_machine	= omap_3430sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 504d2bd222fe..bbcf580fa097 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -18,11 +18,11 @@
 #include <plat/common.h>
 #include <plat/board.h>
 #include <plat/gpmc-smc91x.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 
 #include <mach/board-zoom.h>
 
+#include "board-flash.h"
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 
@@ -66,12 +66,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
-static void __init omap_sdp_map_io(void)
-{
-	omap2_set_globals_36xx();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_config_kernel sdp_config[] __initdata = {
 };
 
@@ -93,21 +87,138 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+/*
+ * SDP3630 CS organization
+ * See also the Switch S8 settings in the comments.
+ */
+static char chip_sel_sdp[][GPMC_CS_NUM] = {
+	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
+	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
+	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
+};
+
+static struct mtd_partition sdp_nor_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+		.name		= "Bootloader-NOR",
+		.offset		= 0,
+		.size		= SZ_256K,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+		.name		= "Params-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_256K,
+		.mask_flags	= 0,
+	},
+	/* kernel */
+	{
+		.name		= "Kernel-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+		.mask_flags	= 0
+	},
+	/* file system */
+	{
+		.name		= "Filesystem-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct mtd_partition sdp_onenand_partitions[] = {
+	{
+		.name		= "X-Loader-OneNAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot Environment-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16 * (64 * 2048),
+	},
+	{
+		.name		= "File System-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition sdp_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
+		.size		= 6 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 40 * (64 * 2048),
+	},
+	{
+		.name		= "File System - NAND",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
+	},
+};
+
+static struct flash_partitions sdp_flash_partitions[] = {
+	{
+		.parts = sdp_nor_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
+	},
+	{
+		.parts = sdp_onenand_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
+	},
+	{
+		.parts = sdp_nand_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
+	},
+};
+
 static void __init omap_sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-	omap_serial_init();
 	zoom_peripherals_init();
 	board_smc91x_init();
+	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);
 }
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_sdp_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_sdp_init_irq,
 	.init_machine	= omap_sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index e4a5d66b83b8..df5a425a49d1 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -20,7 +20,9 @@
 #include <linux/usb/otg.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/twl.h>
+#include <linux/gpio_keys.h>
 #include <linux/regulator/machine.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
@@ -30,16 +32,103 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/control.h>
-#include <plat/timer-gp.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
+
 #include "hsmmc.h"
+#include "timer-gp.h"
+#include "control.h"
 
 #define ETH_KS8851_IRQ			34
 #define ETH_KS8851_POWER_ON		48
 #define ETH_KS8851_QUART		138
+#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
+#define OMAP4_SFH7741_ENABLE_GPIO		188
+
+static struct gpio_led sdp4430_gpio_leds[] = {
+	{
+		.name	= "omap4:green:debug0",
+		.gpio	= 61,
+	},
+	{
+		.name	= "omap4:green:debug1",
+		.gpio	= 30,
+	},
+	{
+		.name	= "omap4:green:debug2",
+		.gpio	= 7,
+	},
+	{
+		.name	= "omap4:green:debug3",
+		.gpio	= 8,
+	},
+	{
+		.name	= "omap4:green:debug4",
+		.gpio	= 50,
+	},
+	{
+		.name	= "omap4:blue:user",
+		.gpio	= 169,
+	},
+	{
+		.name	= "omap4:red:user",
+		.gpio	= 170,
+	},
+	{
+		.name	= "omap4:green:user",
+		.gpio	= 139,
+	},
+
+};
+
+static struct gpio_keys_button sdp4430_gpio_keys[] = {
+	{
+		.desc			= "Proximity Sensor",
+		.type			= EV_SW,
+		.code			= SW_FRONT_PROXIMITY,
+		.gpio			= OMAP4_SFH7741_SENSOR_OUTPUT_GPIO,
+		.active_low		= 0,
+	}
+};
+
+static struct gpio_led_platform_data sdp4430_led_data = {
+	.leds	= sdp4430_gpio_leds,
+	.num_leds	= ARRAY_SIZE(sdp4430_gpio_leds),
+};
+
+static int omap_prox_activate(struct device *dev)
+{
+	gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
+	return 0;
+}
+
+static void omap_prox_deactivate(struct device *dev)
+{
+	gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0);
+}
+
+static struct gpio_keys_platform_data sdp4430_gpio_keys_data = {
+	.buttons	= sdp4430_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(sdp4430_gpio_keys),
+	.enable		= omap_prox_activate,
+	.disable	= omap_prox_deactivate,
+};
+
+static struct platform_device sdp4430_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &sdp4430_gpio_keys_data,
+	},
+};
 
+static struct platform_device sdp4430_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &sdp4430_led_data,
+	},
+};
 static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
 	{
 		.modalias               = "ks8851",
@@ -112,6 +201,8 @@ static struct platform_device sdp4430_lcd_device = {
 
 static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_lcd_device,
+	&sdp4430_gpio_keys_device,
+	&sdp4430_leds_gpio,
 };
 
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
@@ -143,27 +234,30 @@ static struct omap_musb_board_data musb_board_data = {
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.wires		= 8,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= -EINVAL,
 	},
 	{
 		.mmc		= 2,
-		.wires		= 8,
+		.caps		=  MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 		.nonremovable   = true,
+		.ocr_mask	= MMC_VDD_29_30,
 	},
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.0",
+		.dev_name = "mmci-omap-hs.1",
 	},
+};
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.1",
+		.dev_name = "mmci-omap-hs.0",
 	},
 };
 
@@ -175,16 +269,27 @@ static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 	struct omap_mmc_platform_data *pdata = dev->platform_data;
 
 	/* Setting MMC1 Card detect Irq */
-	if (pdev->id == 0)
+	if (pdev->id == 0) {
+		ret = twl6030_mmc_card_detect_config();
+		if (ret)
+			pr_err("Failed configuring MMC1 card detect\n");
 		pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
 						MMCDETECT_INTR_OFFSET;
+		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+	}
 	return ret;
 }
 
 static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
 {
-	struct omap_mmc_platform_data *pdata = dev->platform_data;
+	struct omap_mmc_platform_data *pdata;
 
+	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
+	if (!dev) {
+		pr_err("Failed %s\n", __func__);
+		return;
+	}
+	pdata = dev->platform_data;
 	pdata->init =	omap4_twl6030_hsmmc_late_init;
 }
 
@@ -210,6 +315,8 @@ static struct regulator_init_data sdp4430_vaux1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = sdp4430_vaux_supply,
 };
 
 static struct regulator_init_data sdp4430_vaux2 = {
@@ -250,7 +357,7 @@ static struct regulator_init_data sdp4430_vmmc = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 2,
+	.num_consumer_supplies  = 1,
 	.consumer_supplies      = sdp4430_vmmc_supply,
 };
 
@@ -353,6 +460,16 @@ static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
 		.platform_data = &sdp4430_twldata,
 	},
 };
+static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tmp105", 0x48),
+	},
+};
+static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("hmc5843", 0x1e),
+	},
+};
 static int __init omap4_i2c_init(void)
 {
 	/*
@@ -362,15 +479,38 @@ static int __init omap4_i2c_init(void)
 	omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
 			ARRAY_SIZE(sdp4430_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	omap_register_i2c_bus(4, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
+				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
+	omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo,
+				ARRAY_SIZE(sdp4430_i2c_4_boardinfo));
 	return 0;
 }
+
+static void __init omap_sfh7741prox_init(void)
+{
+	int  error;
+
+	error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741");
+	if (error < 0) {
+		pr_err("%s:failed to request GPIO %d, error %d\n",
+			__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
+		return;
+	}
+
+	error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0);
+	if (error < 0) {
+		pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n",
+			 __func__, OMAP4_SFH7741_ENABLE_GPIO, error);
+		gpio_free(OMAP4_SFH7741_ENABLE_GPIO);
+	}
+}
+
 static void __init omap_4430sdp_init(void)
 {
 	int status;
 
 	omap4_i2c_init();
+	omap_sfh7741prox_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	omap_serial_init();
 	omap4_twl6030_hsmmc_init(mmc);
@@ -398,10 +538,9 @@ static void __init omap_4430sdp_map_io(void)
 
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_4430sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_4430sdp_init_irq,
 	.init_machine	= omap_4430sdp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index af383a876943..07399505312b 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -18,6 +18,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/i2c/pca953x.h>
@@ -32,25 +33,43 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/display.h>
 
 #include "mux.h"
+#include "control.h"
 
-#define AM35XX_EVM_PHY_MASK		(0xF)
 #define AM35XX_EVM_MDIO_FREQUENCY	(1000000)
 
+static struct mdio_platform_data am3517_evm_mdio_pdata = {
+	.bus_freq	= AM35XX_EVM_MDIO_FREQUENCY,
+};
+
+static struct resource am3517_mdio_resources[] = {
+	{
+		.start  = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET,
+		.end    = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET +
+			  SZ_4K - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device am3517_mdio_device = {
+	.name		= "davinci_mdio",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(am3517_mdio_resources),
+	.resource	= am3517_mdio_resources,
+	.dev.platform_data = &am3517_evm_mdio_pdata,
+};
+
 static struct emac_platform_data am3517_evm_emac_pdata = {
-	.phy_mask	= AM35XX_EVM_PHY_MASK,
-	.mdio_max_freq	= AM35XX_EVM_MDIO_FREQUENCY,
 	.rmii_en	= 1,
 };
 
 static struct resource am3517_emac_resources[] = {
 	{
 		.start  = AM35XX_IPSS_EMAC_BASE,
-		.end    = AM35XX_IPSS_EMAC_BASE + 0x3FFFF,
+		.end    = AM35XX_IPSS_EMAC_BASE + 0x2FFFF,
 		.flags  = IORESOURCE_MEM,
 	},
 	{
@@ -106,14 +125,13 @@ static void am3517_disable_ethernet_int(void)
 	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
 }
 
-void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
+static void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
 {
 	unsigned int regval;
 
 	pdata->ctrl_reg_offset		= AM35XX_EMAC_CNTRL_OFFSET;
 	pdata->ctrl_mod_reg_offset	= AM35XX_EMAC_CNTRL_MOD_OFFSET;
 	pdata->ctrl_ram_offset		= AM35XX_EMAC_CNTRL_RAM_OFFSET;
-	pdata->mdio_reg_offset		= AM35XX_EMAC_MDIO_OFFSET;
 	pdata->ctrl_ram_size		= AM35XX_EMAC_CNTRL_RAM_SIZE;
 	pdata->version			= EMAC_VERSION_2;
 	pdata->hw_ram_addr		= AM35XX_EMAC_HW_RAM_ADDR;
@@ -121,6 +139,9 @@ void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
 	pdata->interrupt_disable	= am3517_disable_ethernet_int;
 	am3517_emac_device.dev.platform_data	= pdata;
 	platform_device_register(&am3517_emac_device);
+	platform_device_register(&am3517_mdio_device);
+	clk_add_alias(NULL, dev_name(&am3517_mdio_device.dev),
+		      NULL, &am3517_emac_device.dev);
 
 	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
 	regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
@@ -139,7 +160,6 @@ void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
 static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("s35390a", 0x30),
-		.type		= "s35390a",
 	},
 };
 
@@ -347,7 +367,7 @@ static struct omap_dss_board_info am3517_evm_dss_data = {
 	.default_device	= &am3517_evm_lcd_device,
 };
 
-struct platform_device am3517_evm_dss_device = {
+static struct platform_device am3517_evm_dss_device = {
 	.name		= "omapdss",
 	.id		= -1,
 	.dev		= {
@@ -375,6 +395,31 @@ static void __init am3517_evm_init_irq(void)
 	omap_gpio_init();
 }
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type         = MUSB_INTERFACE_ULPI,
+	.mode                   = MUSB_OTG,
+	.power                  = 500,
+};
+
+static __init void am3517_evm_musb_init(void)
+{
+	u32 devconf2;
+
+	/*
+	 * Set up USB clock/mode in the DEVCONF2 register.
+	 */
+	devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+	/* USB2.0 PHY reference clock is 13 MHz */
+	devconf2 &= ~(CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE);
+	devconf2 |=  CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | CONF2_VBDTCTEN
+			| CONF2_DATPOL;
+
+	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+
+	usb_musb_init(&musb_board_data);
+}
+
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
@@ -393,6 +438,8 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* USB OTG DRVVBUS offset = 0x212 */
+	OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
@@ -459,19 +506,15 @@ static void __init am3517_evm_init(void)
 				ARRAY_SIZE(am3517evm_i2c1_boardinfo));
 	/*Ethernet*/
 	am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
-}
 
-static void __init am3517_evm_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
+	/* MUSB */
+	am3517_evm_musb_init();
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= am3517_evm_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= am3517_evm_init_irq,
 	.init_machine	= am3517_evm_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index aa69fb999748..2c6db1aaeb29 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -35,12 +35,13 @@
 
 #include <mach/gpio.h>
 #include <plat/led.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
-#include <plat/control.h>
+
+#include "mux.h"
+#include "control.h"
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
@@ -244,7 +245,7 @@ static inline void __init apollon_init_smc91x(void)
 	apollon_smc91x_resources[0].end   = base + 0x30f;
 	udelay(100);
 
-	omap_cfg_reg(W4__24XX_GPIO74);
+	omap_mux_init_gpio(74, 0);
 	if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
 			APOLLON_ETHR_GPIO_IRQ);
@@ -286,15 +287,15 @@ static void __init omap_apollon_init_irq(void)
 static void __init apollon_led_init(void)
 {
 	/* LED0 - AA10 */
-	omap_cfg_reg(AA10_242X_GPIO13);
+	omap_mux_init_signal("vlynq_clk.gpio_13", 0);
 	gpio_request(LED0_GPIO13, "LED0");
 	gpio_direction_output(LED0_GPIO13, 0);
 	/* LED1  - AA6 */
-	omap_cfg_reg(AA6_242X_GPIO14);
+	omap_mux_init_signal("vlynq_rx1.gpio_14", 0);
 	gpio_request(LED1_GPIO14, "LED1");
 	gpio_direction_output(LED1_GPIO14, 0);
 	/* LED2  - AA4 */
-	omap_cfg_reg(AA4_242X_GPIO15);
+	omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
 	gpio_request(LED2_GPIO15, "LED2");
 	gpio_direction_output(LED2_GPIO15, 0);
 }
@@ -303,22 +304,35 @@ static void __init apollon_usb_init(void)
 {
 	/* USB device */
 	/* DEVICE_SUSPEND */
-	omap_cfg_reg(P21_242X_GPIO12);
+	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
 	gpio_request(12, "USB suspend");
 	gpio_direction_output(12, 0);
-	omap_usb_init(&apollon_usb_config);
+	omap2_usbfs_init(&apollon_usb_config);
 }
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_apollon_init(void)
 {
 	u32 v;
 
+	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+
 	apollon_led_init();
 	apollon_flash_init();
 	apollon_usb_init();
 
 	/* REVISIT: where's the correct place */
-	omap_cfg_reg(W19_24XX_SYS_NIRQ);
+	omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP);
+
+	/* LCD PWR_EN */
+	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
 
 	/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
 	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
@@ -342,10 +356,9 @@ static void __init omap_apollon_map_io(void)
 
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_apollon_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_apollon_init_irq,
 	.init_machine	= omap_apollon_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e679a2cc86c3..63f764e2af3f 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -31,6 +31,7 @@
 #include <linux/i2c/at24.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
@@ -61,8 +62,6 @@
 #define SB_T35_SMSC911X_GPIO	65
 
 #define NAND_BLOCK_SIZE		SZ_128K
-#define GPMC_CS0_BASE		0x60
-#define GPMC_CS0_BASE_ADDR	(OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE)
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #include <linux/smsc911x.h>
@@ -223,28 +222,12 @@ static struct omap_nand_platform_data cm_t35_nand_data = {
 	.nr_parts		= ARRAY_SIZE(cm_t35_nand_partitions),
 	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
 	.cs			= 0,
-	.gpmc_cs_baseaddr	= (void __iomem *)GPMC_CS0_BASE_ADDR,
-	.gpmc_baseaddr		= (void __iomem *)OMAP34XX_GPMC_VIRT,
 
 };
 
-static struct resource cm_t35_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device cm_t35_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.num_resources	= 1,
-	.resource	= &cm_t35_nand_resource,
-	.dev		= {
-		.platform_data	= &cm_t35_nand_data,
-	},
-};
-
 static void __init cm_t35_init_nand(void)
 {
-	if (platform_device_register(&cm_t35_nand_device) < 0)
+	if (gpmc_nand_init(&cm_t35_nand_data) < 0)
 		pr_err("CM-T35: Unable to register NAND device\n");
 }
 #else
@@ -255,8 +238,6 @@ static inline void cm_t35_init_nand(void) {}
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 #include <linux/spi/ads7846.h>
 
-#include <plat/mcspi.h>
-
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel	= 1,	/* 0: slave, 1: master */
@@ -576,7 +557,7 @@ static struct twl4030_usb_data cm_t35_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static int cm_t35_keymap[] = {
+static uint32_t cm_t35_keymap[] = {
 	KEY(0, 0, KEY_A),	KEY(0, 1, KEY_B),	KEY(0, 2, KEY_LEFT),
 	KEY(1, 0, KEY_UP),	KEY(1, 1, KEY_ENTER),	KEY(1, 2, KEY_DOWN),
 	KEY(2, 0, KEY_RIGHT),	KEY(2, 1, KEY_C),	KEY(2, 2, KEY_D),
@@ -597,14 +578,14 @@ static struct twl4030_keypad_data cm_t35_kp_data = {
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 
 	},
 	{
 		.mmc		= 2,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.transceiver	= 1,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
@@ -708,12 +689,6 @@ static void __init cm_t35_init_irq(void)
 	omap_gpio_init();
 }
 
-static void __init cm_t35_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_mux board_mux[] __initdata = {
 	/* nCS and IRQ for CM-T35 ethernet */
 	OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
@@ -833,10 +808,9 @@ static void __init cm_t35_init(void)
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= cm_t35_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= cm_t35_init_irq,
 	.init_machine	= cm_t35_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
new file mode 100644
index 000000000000..1dd303e9a267
--- /dev/null
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -0,0 +1,292 @@
+/*
+ * linux/arch/arm/mach-omap2/board-cm-t3517.c
+ *
+ * Support for the CompuLab CM-T3517 modules
+ *
+ * Copyright (C) 2010 CompuLab, Ltd.
+ * Author: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/rtc-v3020.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/can/platform/ti_hecc.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/usb.h>
+#include <plat/nand.h>
+#include <plat/gpmc.h>
+
+#include <mach/am35xx.h>
+
+#include "mux.h"
+#include "control.h"
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cm_t3517_leds[] = {
+	[0] = {
+		.gpio			= 186,
+		.name			= "cm-t3517:green",
+		.default_trigger	= "heartbeat",
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data cm_t3517_led_pdata = {
+	.num_leds	= ARRAY_SIZE(cm_t3517_leds),
+	.leds		= cm_t3517_leds,
+};
+
+static struct platform_device cm_t3517_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &cm_t3517_led_pdata,
+	},
+};
+
+static void __init cm_t3517_init_leds(void)
+{
+	platform_device_register(&cm_t3517_led_device);
+}
+#else
+static inline void cm_t3517_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_CAN_TI_HECC) || defined(CONFIG_CAN_TI_HECC_MODULE)
+static struct resource cm_t3517_hecc_resources[] = {
+	{
+		.start	= AM35XX_IPSS_HECC_BASE,
+		.end	= AM35XX_IPSS_HECC_BASE + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_35XX_HECC0_IRQ,
+		.end	= INT_35XX_HECC0_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct ti_hecc_platform_data cm_t3517_hecc_pdata = {
+	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
+	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
+	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
+	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
+	.int_line		= AM35XX_HECC_INT_LINE,
+	.version		= AM35XX_HECC_VERSION,
+};
+
+static struct platform_device cm_t3517_hecc_device = {
+	.name		= "ti_hecc",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(cm_t3517_hecc_resources),
+	.resource	= cm_t3517_hecc_resources,
+	.dev		= {
+		.platform_data	= &cm_t3517_hecc_pdata,
+	},
+};
+
+static void cm_t3517_init_hecc(void)
+{
+	platform_device_register(&cm_t3517_hecc_device);
+}
+#else
+static inline void cm_t3517_init_hecc(void) {}
+#endif
+
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
+#define RTC_IO_GPIO		(153)
+#define RTC_WR_GPIO		(154)
+#define RTC_RD_GPIO		(160)
+#define RTC_CS_GPIO		(163)
+
+struct v3020_platform_data cm_t3517_v3020_pdata = {
+	.use_gpio	= 1,
+	.gpio_cs	= RTC_CS_GPIO,
+	.gpio_wr	= RTC_WR_GPIO,
+	.gpio_rd	= RTC_RD_GPIO,
+	.gpio_io	= RTC_IO_GPIO,
+};
+
+static struct platform_device cm_t3517_rtc_device = {
+	.name		= "v3020",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_t3517_v3020_pdata,
+	}
+};
+
+static void __init cm_t3517_init_rtc(void)
+{
+	platform_device_register(&cm_t3517_rtc_device);
+}
+#else
+static inline void cm_t3517_init_rtc(void) {}
+#endif
+
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+#define HSUSB1_RESET_GPIO	(146)
+#define HSUSB2_RESET_GPIO	(147)
+#define USB_HUB_RESET_GPIO	(152)
+
+static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = HSUSB1_RESET_GPIO,
+	.reset_gpio_port[1]  = HSUSB2_RESET_GPIO,
+	.reset_gpio_port[2]  = -EINVAL,
+};
+
+static int cm_t3517_init_usbh(void)
+{
+	int err;
+
+	err = gpio_request(USB_HUB_RESET_GPIO, "usb hub rst");
+	if (err) {
+		pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err);
+	} else {
+		gpio_direction_output(USB_HUB_RESET_GPIO, 0);
+		udelay(10);
+		gpio_set_value(USB_HUB_RESET_GPIO, 1);
+		msleep(1);
+	}
+
+	usb_ehci_init(&cm_t3517_ehci_pdata);
+
+	return 0;
+}
+#else
+static inline int cm_t3517_init_usbh(void)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#define NAND_BLOCK_SIZE		SZ_128K
+
+static struct mtd_partition cm_t3517_nand_partitions[] = {
+	{
+		.name           = "xloader",
+		.offset         = 0,			/* Offset = 0x00000 */
+		.size           = 4 * NAND_BLOCK_SIZE,
+		.mask_flags     = MTD_WRITEABLE
+	},
+	{
+		.name           = "uboot",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size           = 15 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "uboot environment",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size           = 2 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "linux",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size           = 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data cm_t3517_nand_data = {
+	.parts			= cm_t3517_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(cm_t3517_nand_partitions),
+	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
+	.cs			= 0,
+};
+
+static void __init cm_t3517_init_nand(void)
+{
+	if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
+		pr_err("CM-T3517: NAND initialization failed\n");
+}
+#else
+static inline void cm_t3517_init_nand(void) {}
+#endif
+
+static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
+};
+
+static void __init cm_t3517_init_irq(void)
+{
+	omap_board_config = cm_t3517_config;
+	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
+
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct omap_board_mux board_mux[] __initdata = {
+	/* GPIO186 - Green LED */
+	OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* RTC GPIOs: IO, WR#, RD#, CS# */
+	OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* HSUSB1 RESET */
+	OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* HSUSB2 RESET */
+	OMAP3_MUX(UART2_RX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* CM-T3517 USB HUB nRESET */
+	OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+static void __init cm_t3517_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_serial_init();
+	cm_t3517_init_leds();
+	cm_t3517_init_nand();
+	cm_t3517_init_rtc();
+	cm_t3517_init_usbh();
+	cm_t3517_init_hecc();
+}
+
+MACHINE_START(CM_T3517, "Compulab CM-T3517")
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_map_io,
+	.reserve        = omap_reserve,
+	.init_irq	= cm_t3517_init_irq,
+	.init_machine	= cm_t3517_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 77022b588816..067f4379c87f 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -28,11 +28,13 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
+#include <mach/id.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -43,7 +45,6 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/timer-gp.h>
 #include <plat/display.h>
 
 #include <plat/mcspi.h>
@@ -57,9 +58,7 @@
 
 #include "mux.h"
 #include "hsmmc.h"
-
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
+#include "timer-gp.h"
 
 #define NAND_BLOCK_SIZE		SZ_128K
 
@@ -104,76 +103,58 @@ static struct omap_nand_platform_data devkit8000_nand_data = {
 	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
 };
 
-static struct resource devkit8000_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device devkit8000_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &devkit8000_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &devkit8000_nand_resource,
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.wires		= 8,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 29,
 	},
 	{}	/* Terminator */
 };
-static struct omap_board_config_kernel devkit8000_config[] __initdata = {
-};
 
 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
 	twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
 	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
 
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 1);
 	return 0;
 }
 
 static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 0);
 }
+
 static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 1);
 	return 0;
 }
 
 static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 0);
 }
 
-static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev)
-{
+static struct regulator_consumer_supply devkit8000_vmmc1_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
 
-	return 0;
-}
-
-static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
-
-static struct regulator_consumer_supply devkit8000_vmmc1_supply = {
-	.supply			= "vmmc",
-};
-
-static struct regulator_consumer_supply devkit8000_vsim_supply = {
-	.supply			= "vmmc_aux",
-};
 
+/* ads7846 on SPI */
+static struct regulator_consumer_supply devkit8000_vio_supply =
+	REGULATOR_SUPPLY("vcc", "spi2.0");
 
 static struct omap_dss_device devkit8000_lcd_device = {
 	.name                   = "lcd",
-	.driver_name            = "innolux_at_panel",
+	.driver_name            = "generic_panel",
 	.type                   = OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines     = 24,
+	.reset_gpio             = -EINVAL, /* will be replaced */
 	.platform_enable        = devkit8000_panel_enable_lcd,
 	.platform_disable       = devkit8000_panel_disable_lcd,
 };
@@ -182,6 +163,7 @@ static struct omap_dss_device devkit8000_dvi_device = {
 	.driver_name            = "generic_panel",
 	.type                   = OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines     = 24,
+	.reset_gpio             = -EINVAL, /* will be replaced */
 	.platform_enable        = devkit8000_panel_enable_dvi,
 	.platform_disable       = devkit8000_panel_disable_dvi,
 };
@@ -191,8 +173,6 @@ static struct omap_dss_device devkit8000_tv_device = {
 	.driver_name            = "venc",
 	.type                   = OMAP_DISPLAY_TYPE_VENC,
 	.phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable        = devkit8000_panel_enable_tv,
-	.platform_disable       = devkit8000_panel_disable_tv,
 };
 
 
@@ -216,12 +196,10 @@ static struct platform_device devkit8000_dss_device = {
 	},
 };
 
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply = {
-	.supply = "vdda_dac",
-	.dev	= &devkit8000_dss_device.dev,
-};
+static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss");
 
-static int board_keymap[] = {
+static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_1),
 	KEY(1, 0, KEY_2),
 	KEY(2, 0, KEY_3),
@@ -266,7 +244,21 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 
 	/* link regulators to MMC adapters */
 	devkit8000_vmmc1_supply.dev = mmc[0].dev;
-	devkit8000_vsim_supply.dev = mmc[0].dev;
+
+	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+        /* gpio + 1 is "LCD_PWREN" (out, active high) */
+	devkit8000_lcd_device.reset_gpio = gpio + 1;
+	gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
+	/* Disable until needed */
+	gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+
+	/* gpio + 7 is "DVI_PD" (out, active low) */
+	devkit8000_dvi_device.reset_gpio = gpio + 7;
+	gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
+	/* Disable until needed */
+	gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
 
 	return 0;
 }
@@ -282,16 +274,8 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.setup		= devkit8000_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
-	{
-	.supply		= "vdvi",
-	.dev		= &devkit8000_lcd_device.dev,
-	},
-	{
-	.supply		= "vdds_dsi",
-	.dev		= &devkit8000_dss_device.dev,
-	}
-};
+static struct regulator_consumer_supply devkit8000_vpll1_supply =
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data devkit8000_vmmc1 = {
@@ -308,21 +292,6 @@ static struct regulator_init_data devkit8000_vmmc1 = {
 	.consumer_supplies	= &devkit8000_vmmc1_supply,
 };
 
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data devkit8000_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vsim_supply,
-};
-
 /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
 static struct regulator_init_data devkit8000_vdac = {
 	.constraints = {
@@ -337,10 +306,9 @@ static struct regulator_init_data devkit8000_vdac = {
 	.consumer_supplies	= &devkit8000_vdda_dac_supply,
 };
 
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data devkit8000_vpll2 = {
+/* VPLL1 for digital video outputs */
+static struct regulator_init_data devkit8000_vpll1 = {
 	.constraints = {
-		.name			= "VDVI",
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
@@ -348,8 +316,23 @@ static struct regulator_init_data devkit8000_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll2_supplies),
-	.consumer_supplies	= devkit8000_vpll2_supplies,
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &devkit8000_vpll1_supply,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data devkit8000_vio = {
+	.constraints = {
+		.min_uV                 = 1800000,
+		.max_uV                 = 1800000,
+		.apply_uV               = true,
+		.valid_modes_mask       = REGULATOR_MODE_NORMAL
+			| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask         = REGULATOR_CHANGE_MODE
+			| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &devkit8000_vio_supply,
 };
 
 static struct twl4030_usb_data devkit8000_usb_data = {
@@ -374,15 +357,15 @@ static struct twl4030_platform_data devkit8000_twldata = {
 	.gpio		= &devkit8000_gpio_data,
 	.codec		= &devkit8000_codec_data,
 	.vmmc1		= &devkit8000_vmmc1,
-	.vsim		= &devkit8000_vsim,
 	.vdac		= &devkit8000_vdac,
-	.vpll2		= &devkit8000_vpll2,
+	.vpll1		= &devkit8000_vpll1,
+	.vio		= &devkit8000_vio,
 	.keypad		= &devkit8000_kp_data,
 };
 
 static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = {
 	{
-		I2C_BOARD_INFO("twl4030", 0x48),
+		I2C_BOARD_INFO("tps65930", 0x48),
 		.flags = I2C_CLIENT_WAKE,
 		.irq = INT_34XX_SYS_NIRQ,
 		.platform_data = &devkit8000_twldata,
@@ -464,8 +447,6 @@ static struct platform_device keys_gpio = {
 
 static void __init devkit8000_init_irq(void)
 {
-	omap_board_config = devkit8000_config;
-	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
@@ -560,6 +541,9 @@ static struct platform_device omap_dm9000_dev = {
 
 static void __init omap_dm9000_init(void)
 {
+	unsigned char *eth_addr = omap_dm9000_platdata.dev_addr;
+	struct omap_die_id odi;
+
 	if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
 			OMAP_DM9000_GPIO_IRQ);
@@ -567,6 +551,16 @@ static void __init omap_dm9000_init(void)
 		}
 
 	gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+
+	/* init the mac address using DIE id */
+	omap_get_die_id(&odi);
+
+	eth_addr[0] = 0x02; /* locally administered */
+	eth_addr[1] = odi.id_1 & 0xff;
+	eth_addr[2] = (odi.id_0 & 0xff000000) >> 24;
+	eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16;
+	eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8;
+	eth_addr[5] = (odi.id_0 & 0x000000ff);
 }
 
 static struct platform_device *devkit8000_devices[] __initdata = {
@@ -581,8 +575,6 @@ static void __init devkit8000_flash_init(void)
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -604,13 +596,9 @@ static void __init devkit8000_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		devkit8000_nand_data.cs = nandcs;
-		devkit8000_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		devkit8000_nand_data.gpmc_baseaddr = (void *)
-			(gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&devkit8000_nand_device) < 0)
+		if (gpmc_nand_init(&devkit8000_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -797,8 +785,6 @@ static void __init devkit8000_init(void)
 	devkit8000_i2c_init();
 	platform_add_devices(devkit8000_devices,
 			ARRAY_SIZE(devkit8000_devices));
-	omap_board_config = devkit8000_config;
-	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
 
 	spi_register_board_info(devkit8000_spi_board_info,
 	ARRAY_SIZE(devkit8000_spi_board_info));
@@ -814,17 +800,10 @@ static void __init devkit8000_init(void)
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init devkit8000_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= devkit8000_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
new file mode 100644
index 000000000000..fd38c05bb47f
--- /dev/null
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -0,0 +1,254 @@
+/*
+ * board-sdp-flash.c
+ * Modified from mach-omap2/board-3430sdp-flash.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Vimal Singh <vimalsingh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/onenand.h>
+#include <plat/tc.h>
+
+#include "board-flash.h"
+
+#define REG_FPGA_REV			0x10
+#define REG_FPGA_DIP_SWITCH_INPUT2	0x60
+#define MAX_SUPPORTED_GPMC_CONFIG	3
+
+#define DEBUG_BASE		0x08000000 /* debug board */
+
+/* various memory sizes */
+#define FLASH_SIZE_SDPV1	SZ_64M	/* NOR flash (64 Meg aligned) */
+#define FLASH_SIZE_SDPV2	SZ_128M	/* NOR flash (256 Meg aligned) */
+
+static struct physmap_flash_data board_nor_data = {
+	.width		= 2,
+};
+
+static struct resource board_nor_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device board_nor_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+			.platform_data = &board_nor_data,
+	},
+	.num_resources	= 1,
+	.resource	= &board_nor_resource,
+};
+
+static void
+__init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
+{
+	int err;
+
+	board_nor_data.parts	= nor_parts;
+	board_nor_data.nr_parts	= nr_parts;
+
+	/* Configure start address and size of NOR device */
+	if (omap_rev() >= OMAP3430_REV_ES1_0) {
+		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
+				(unsigned long *)&board_nor_resource.start);
+		board_nor_resource.end = board_nor_resource.start
+					+ FLASH_SIZE_SDPV2 - 1;
+	} else {
+		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
+				(unsigned long *)&board_nor_resource.start);
+		board_nor_resource.end = board_nor_resource.start
+					+ FLASH_SIZE_SDPV1 - 1;
+	}
+	if (err < 0) {
+		printk(KERN_ERR "NOR: Can't request GPMC CS\n");
+		return;
+	}
+	if (platform_device_register(&board_nor_device) < 0)
+		printk(KERN_ERR	"Unable to register NOR device\n");
+}
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+static struct omap_onenand_platform_data board_onenand_data = {
+	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
+};
+
+static void
+__init board_onenand_init(struct mtd_partition *onenand_parts,
+				u8 nr_parts, u8 cs)
+{
+	board_onenand_data.cs		= cs;
+	board_onenand_data.parts	= onenand_parts;
+	board_onenand_data.nr_parts	= nr_parts;
+
+	gpmc_onenand_init(&board_onenand_data);
+}
+#else
+static void
+__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
+{
+}
+#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+
+/* Note that all values in this struct are in nanoseconds */
+static struct gpmc_timings nand_timings = {
+
+	.sync_clk = 0,
+
+	.cs_on = 0,
+	.cs_rd_off = 36,
+	.cs_wr_off = 36,
+
+	.adv_on = 6,
+	.adv_rd_off = 24,
+	.adv_wr_off = 36,
+
+	.we_off = 30,
+	.oe_off = 48,
+
+	.access = 54,
+	.rd_cycle = 72,
+	.wr_cycle = 72,
+
+	.wr_access = 30,
+	.wr_data_mux_bus = 0,
+};
+
+static struct omap_nand_platform_data board_nand_data = {
+	.nand_setup	= NULL,
+	.gpmc_t		= &nand_timings,
+	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+	.dev_ready	= NULL,
+	.devsize	= 0,	/* '0' for 8-bit, '1' for 16-bit device */
+};
+
+void
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs)
+{
+	board_nand_data.cs		= cs;
+	board_nand_data.parts		= nand_parts;
+	board_nand_data.nr_parts		= nr_parts;
+
+	gpmc_nand_init(&board_nand_data);
+}
+#else
+void
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs)
+{
+}
+#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
+
+/**
+ * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
+ * the various cs values.
+ */
+static u8 get_gpmc0_type(void)
+{
+	u8 cs = 0;
+	void __iomem *fpga_map_addr;
+
+	fpga_map_addr = ioremap(DEBUG_BASE, 4096);
+	if (!fpga_map_addr)
+		return -ENOMEM;
+
+	if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
+		/* we dont have an DEBUG FPGA??? */
+		/* Depend on #defines!! default to strata boot return param */
+		goto unmap;
+
+	/* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
+	cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
+
+	/* ES2.0 SDP's onwards 4 dip switches are provided for CS */
+	if (omap_rev() >= OMAP3430_REV_ES1_0)
+		/* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
+		cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
+			((cs & 2) << 1) | ((cs & 1) << 3);
+	else
+		/* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
+		cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
+unmap:
+	iounmap(fpga_map_addr);
+	return cs;
+}
+
+/**
+ * sdp3430_flash_init - Identify devices connected to GPMC and register.
+ *
+ * @return - void.
+ */
+void board_flash_init(struct flash_partitions partition_info[],
+					char chip_sel_board[][GPMC_CS_NUM])
+{
+	u8		cs = 0;
+	u8		norcs = GPMC_CS_NUM + 1;
+	u8		nandcs = GPMC_CS_NUM + 1;
+	u8		onenandcs = GPMC_CS_NUM + 1;
+	u8		idx;
+	unsigned char	*config_sel = NULL;
+
+	/* REVISIT: Is this return correct idx for 2430 SDP?
+	 * for which cs configuration matches for 2430 SDP?
+	 */
+	idx = get_gpmc0_type();
+	if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
+		printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs);
+		return;
+	}
+	config_sel = (unsigned char *)(chip_sel_board[idx]);
+
+	while (cs < GPMC_CS_NUM) {
+		switch (config_sel[cs]) {
+		case PDC_NOR:
+			if (norcs > GPMC_CS_NUM)
+				norcs = cs;
+			break;
+		case PDC_NAND:
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+			break;
+		case PDC_ONENAND:
+			if (onenandcs > GPMC_CS_NUM)
+				onenandcs = cs;
+			break;
+		};
+		cs++;
+	}
+
+	if (norcs > GPMC_CS_NUM)
+		printk(KERN_INFO "NOR: Unable to find configuration "
+				"in GPMC\n");
+	else
+		board_nor_init(partition_info[0].parts,
+				partition_info[0].nr_parts, norcs);
+
+	if (onenandcs > GPMC_CS_NUM)
+		printk(KERN_INFO "OneNAND: Unable to find configuration "
+				"in GPMC\n");
+	else
+		board_onenand_init(partition_info[1].parts,
+					partition_info[1].nr_parts, onenandcs);
+
+	if (nandcs > GPMC_CS_NUM)
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				"in GPMC\n");
+	else
+		board_nand_init(partition_info[2].parts,
+				partition_info[2].nr_parts, nandcs);
+}
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
new file mode 100644
index 000000000000..69befe00dd2f
--- /dev/null
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -0,0 +1,30 @@
+/*
+ *  board-sdp.h
+ *
+ *  Information structures for SDP-specific board config data
+ *
+ *  Copyright (C) 2009 Nokia Corporation
+ *  Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <plat/gpmc.h>
+
+#define PDC_NOR		1
+#define PDC_NAND	2
+#define PDC_ONENAND	3
+#define DBG_MPDB	4
+
+struct flash_partitions {
+	struct mtd_partition *parts;
+	int nr_parts;
+};
+
+extern void board_flash_init(struct flash_partitions [],
+				char chip_sel[][GPMC_CS_NUM]);
+extern void board_nand_init(struct mtd_partition *nand_parts,
+					u8 nr_parts, u8 cs);
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 16cc06860670..b1c2c9a11c38 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
@@ -49,16 +48,27 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
-	omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
-	omap242x_map_common_io();
+	if (cpu_is_omap242x()) {
+		omap2_set_globals_242x();
+		omap242x_map_common_io();
+	} else if (cpu_is_omap243x()) {
+		omap2_set_globals_243x();
+		omap243x_map_common_io();
+	} else if (cpu_is_omap34xx()) {
+		omap2_set_globals_3xxx();
+		omap34xx_map_common_io();
+	} else if (cpu_is_omap44xx()) {
+		omap2_set_globals_443x();
+		omap44xx_map_common_io();
+	}
 }
 
+/* XXX This machine entry name should be updated */
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_generic_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0665f2c8dc8e..929993b4bf26 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -31,9 +31,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/control.h>
 #include <mach/gpio.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
@@ -42,6 +40,9 @@
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 
+#include "mux.h"
+#include "control.h"
+
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1
 
@@ -246,7 +247,7 @@ static inline void __init h4_init_debug(void)
 
 	udelay(100);
 
-	omap_cfg_reg(M15_24XX_GPIO92);
+	omap_mux_init_gpio(92, 0);
 	if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
 		gpmc_cs_free(eth_cs);
 
@@ -272,27 +273,6 @@ static struct omap_lcd_config h4_lcd_config __initdata = {
 };
 
 static struct omap_usb_config h4_usb_config __initdata = {
-#ifdef	CONFIG_MACH_OMAP2_H4_USB1
-	/* NOTE:  usb1 could also be used with 3 wire signaling */
-	.pins[1]	= 4,
-#endif
-
-#ifdef	CONFIG_MACH_OMAP_H4_OTG
-	/* S1.10 ON -- USB OTG port
-	 * usb0 switched to Mini-AB port and isp1301 transceiver;
-	 * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging
-	 */
-	.otg		= 1,
-	.pins[0]	= 4,
-#ifdef	CONFIG_USB_GADGET_OMAP
-	/* use OTG cable, or standard A-to-MiniB */
-	.hmc_mode	= 0x14,	/* 0:dev/otg 1:host 2:disable */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* use OTG cable, or NONSTANDARD (B-to-MiniB) */
-	.hmc_mode	= 0x11,	/* 0:host 1:host 2:disable */
-#endif	/* XX */
-
-#else
 	/* S1.10 OFF -- usb "download port"
 	 * usb0 switched to Mini-B port and isp1105 transceiver;
 	 * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
@@ -301,7 +281,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
 	.pins[0]	= 3,
 /*	.hmc_mode	= 0x14,*/	/* 0:dev 1:host 2:disable */
 	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
-#endif
 };
 
 static struct omap_board_config_kernel h4_config[] = {
@@ -338,31 +317,54 @@ static struct i2c_board_info __initdata h4_i2c_board_info[] = {
 	},
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_h4_init(void)
 {
+	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
+
 	/*
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on
 	 * if not needed.
 	 */
-#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
-	omap_cfg_reg(K15_24XX_UART3_TX);
-	omap_cfg_reg(K14_24XX_UART3_RX);
-#endif
 
 #if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
+	omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
 	if (omap_has_menelaus()) {
+		omap_mux_init_signal("sdrc_a14.gpio0",
+			OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
+		omap_mux_init_signal("gpio_98", 0);
 		row_gpios[5] = 0;
 		col_gpios[2] = 15;
 		col_gpios[6] = 18;
+	} else {
+		omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("gpio_100", 0);
+		omap_mux_init_signal("gpio_98", 0);
 	}
+	omap_mux_init_signal("gpio_90", 0);
+	omap_mux_init_signal("gpio_91", 0);
+	omap_mux_init_signal("gpio_36", 0);
+	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
+	omap_mux_init_signal("gpio_97", 0);
 #endif
 
 	i2c_register_board_info(1, h4_i2c_board_info,
 			ARRAY_SIZE(h4_i2c_board_info));
 
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
-	omap_usb_init(&h4_usb_config);
+	omap2_usbfs_init(&h4_usb_config);
 	omap_serial_init();
 }
 
@@ -374,10 +376,9 @@ static void __init omap_h4_map_io(void)
 
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_h4_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_h4_init_irq,
 	.init_machine	= omap_h4_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index d55c57b761a9..5e035a58b809 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -20,6 +20,7 @@
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -38,12 +39,61 @@
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
 #define IGEP2_GPIO_USBH_NRESET  24
-#define IGEP2_GPIO_LED0_GREEN 	26
-#define IGEP2_GPIO_LED0_RED 	27
-#define IGEP2_GPIO_LED1_RED   	28
-#define IGEP2_GPIO_DVI_PUP	170
-#define IGEP2_GPIO_WIFI_NPD 	94
-#define IGEP2_GPIO_WIFI_NRESET 	95
+#define IGEP2_GPIO_LED0_GREEN   26
+#define IGEP2_GPIO_LED0_RED     27
+#define IGEP2_GPIO_LED1_RED     28
+#define IGEP2_GPIO_DVI_PUP      170
+
+#define IGEP2_RB_GPIO_WIFI_NPD     94
+#define IGEP2_RB_GPIO_WIFI_NRESET  95
+#define IGEP2_RB_GPIO_BT_NRESET    137
+#define IGEP2_RC_GPIO_WIFI_NPD     138
+#define IGEP2_RC_GPIO_WIFI_NRESET  139
+#define IGEP2_RC_GPIO_BT_NRESET    137
+
+/*
+ * IGEP2 Hardware Revision Table
+ *
+ *  --------------------------------------------------------------------------
+ * | Id. | Hw Rev.            | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET |
+ *  --------------------------------------------------------------------------
+ * |  0  | B                  |   high   |  gpio94  |   gpio95    |     -     |
+ * |  0  | B/C (B-compatible) |   high   |  gpio94  |   gpio95    |  gpio137  |
+ * |  1  | C                  |   low    |  gpio138 |   gpio139   |  gpio137  |
+ *  --------------------------------------------------------------------------
+ */
+
+#define IGEP2_BOARD_HWREV_B	0
+#define IGEP2_BOARD_HWREV_C	1
+
+static u8 hwrev;
+
+static void __init igep2_get_revision(void)
+{
+	u8 ret;
+
+	omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT);
+
+	if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_HW0_REV") == 0) &&
+	    (gpio_direction_input(IGEP2_GPIO_LED1_RED) == 0)) {
+		ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
+		if (ret == 0) {
+			pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
+			hwrev = IGEP2_BOARD_HWREV_C;
+		} else if (ret ==  1) {
+			pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
+			hwrev = IGEP2_BOARD_HWREV_B;
+		} else {
+			pr_err("IGEP2: Unknown Hardware Revision\n");
+			hwrev = -1;
+		}
+	} else {
+		pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n");
+		pr_err("IGEP2: Unknown Hardware Revision\n");
+	}
+
+	gpio_free(IGEP2_GPIO_LED1_RED);
+}
 
 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
 	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
@@ -107,7 +157,7 @@ static struct platform_device igep2_onenand_device = {
 	},
 };
 
-void __init igep2_flash_init(void)
+static void __init igep2_flash_init(void)
 {
 	u8		cs = 0;
 	u8		onenandcs = GPMC_CS_NUM + 1;
@@ -141,7 +191,7 @@ void __init igep2_flash_init(void)
 }
 
 #else
-void __init igep2_flash_init(void) {}
+static void __init igep2_flash_init(void) {}
 #endif
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
@@ -211,10 +261,6 @@ static struct regulator_consumer_supply igep2_vmmc1_supply = {
 	.supply		= "vmmc",
 };
 
-static struct regulator_consumer_supply igep2_vmmc2_supply = {
-	.supply		= "vmmc",
-};
-
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep2_vmmc1 = {
 	.constraints = {
@@ -230,37 +276,95 @@ static struct regulator_init_data igep2_vmmc1 = {
 	.consumer_supplies      = &igep2_vmmc1_supply,
 };
 
-/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */
-static struct regulator_init_data igep2_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &igep2_vmmc2_supply,
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 	},
+#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
 	{
 		.mmc		= 2,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 	},
+#endif
 	{}      /* Terminator */
 };
 
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led igep2_gpio_leds[] = {
+	[0] = {
+		.name			= "gpio-led:red:d0",
+		.gpio			= IGEP2_GPIO_LED0_RED,
+		.default_trigger	= "default-off"
+	},
+	[1] = {
+		.name			= "gpio-led:green:d0",
+		.gpio			= IGEP2_GPIO_LED0_GREEN,
+		.default_trigger	= "default-off",
+	},
+	[2] = {
+		.name			= "gpio-led:red:d1",
+		.gpio			= IGEP2_GPIO_LED1_RED,
+		.default_trigger	= "default-off",
+	},
+	[3] = {
+		.name			= "gpio-led:green:d1",
+		.default_trigger	= "heartbeat",
+		.gpio			= -EINVAL, /* gets replaced */
+	},
+};
+
+static struct gpio_led_platform_data igep2_led_pdata = {
+	.leds           = igep2_gpio_leds,
+	.num_leds       = ARRAY_SIZE(igep2_gpio_leds),
+};
+
+static struct platform_device igep2_led_device = {
+	 .name   = "leds-gpio",
+	 .id     = -1,
+	 .dev    = {
+		 .platform_data  =  &igep2_led_pdata,
+	},
+};
+
+static void __init igep2_leds_init(void)
+{
+	platform_device_register(&igep2_led_device);
+}
+
+#else
+static inline void igep2_leds_init(void)
+{
+	if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED0_RED, 0);
+		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
+
+	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
+		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
+
+	if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED1_RED, 0);
+		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
+
+}
+#endif
+
 static int igep2_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
@@ -268,20 +372,48 @@ static int igep2_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters ... we "know" the
+	/*
+	 * link regulators to MMC adapters ... we "know" the
 	 * regulators will be set up only *after* we return.
-	*/
+	 */
 	igep2_vmmc1_supply.dev = mmc[0].dev;
-	igep2_vmmc2_supply.dev = mmc[1].dev;
+
+	/*
+	 * REVISIT: need ehci-omap hooks for external VBUS
+	 * power switch and overcurrent detect
+	 */
+	if ((gpio_request(gpio + 1, "GPIO_EHCI_NOC") < 0) ||
+	    (gpio_direction_input(gpio + 1) < 0))
+		pr_err("IGEP2: Could not obtain gpio for EHCI NOC");
+
+	/*
+	 * TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN
+	 * (out, active low)
+	 */
+	if ((gpio_request(gpio + TWL4030_GPIO_MAX, "GPIO_USBH_CPEN") < 0) ||
+	    (gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0) < 0))
+		pr_err("IGEP2: Could not obtain gpio for USBH_CPEN");
+
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
+	if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
+	    && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {
+		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
+		gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n");
+#else
+	igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
+#endif
 
 	return 0;
 };
 
-static struct twl4030_gpio_platform_data igep2_gpio_data = {
+static struct twl4030_gpio_platform_data igep2_twl4030_gpio_pdata = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.use_leds	= false,
+	.use_leds	= true,
 	.setup		= igep2_twl_gpio_setup,
 };
 
@@ -355,47 +487,6 @@ static void __init igep2_display_init(void)
 		pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
 }
 
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led igep2_gpio_leds[] = {
-	{
-		.name = "led0:red",
-		.gpio = IGEP2_GPIO_LED0_RED,
-	},
-	{
-		.name = "led0:green",
-		.default_trigger = "heartbeat",
-		.gpio = IGEP2_GPIO_LED0_GREEN,
-	},
-	{
-		.name = "led1:red",
-		.gpio = IGEP2_GPIO_LED1_RED,
-	},
-};
-
-static struct gpio_led_platform_data igep2_led_pdata = {
-	.leds           = igep2_gpio_leds,
-	.num_leds       = ARRAY_SIZE(igep2_gpio_leds),
-};
-
-static struct platform_device igep2_led_device = {
-	 .name   = "leds-gpio",
-	 .id     = -1,
-	 .dev    = {
-		 .platform_data  =  &igep2_led_pdata,
-	},
-};
-
-static void __init igep2_init_led(void)
-{
-	platform_device_register(&igep2_led_device);
-}
-
-#else
-static inline void igep2_init_led(void) {}
-#endif
-
 static struct platform_device *igep2_devices[] __initdata = {
 	&igep2_dss_device,
 };
@@ -425,14 +516,13 @@ static struct twl4030_platform_data igep2_twldata = {
 	/* platform_data for children goes here */
 	.usb		= &igep2_usb_data,
 	.codec		= &igep2_codec_data,
-	.gpio		= &igep2_gpio_data,
+	.gpio		= &igep2_twl4030_gpio_pdata,
 	.vmmc1          = &igep2_vmmc1,
-	.vmmc2		= &igep2_vmmc2,
 	.vpll2		= &igep2_vpll2,
 
 };
 
-static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = {
+static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("twl4030", 0x48),
 		.flags		= I2C_CLIENT_WAKE,
@@ -441,14 +531,29 @@ static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = {
 	},
 };
 
-static int __init igep2_i2c_init(void)
+static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("eeprom", 0x50),
+	},
+};
+
+static void __init igep2_i2c_init(void)
 {
-	omap_register_i2c_bus(1, 2600, igep2_i2c_boardinfo,
-			ARRAY_SIZE(igep2_i2c_boardinfo));
-	/* Bus 3 is attached to the DVI port where devices like the pico DLP
-	 * projector don't work reliably with 400kHz */
-	omap_register_i2c_bus(3, 100, NULL, 0);
-	return 0;
+	int ret;
+
+	ret = omap_register_i2c_bus(1, 2600, igep2_i2c1_boardinfo,
+		ARRAY_SIZE(igep2_i2c1_boardinfo));
+	if (ret)
+		pr_warning("IGEP2: Could not register I2C1 bus (%d)\n", ret);
+
+	/*
+	 * Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz
+	 */
+	ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo,
+		ARRAY_SIZE(igep2_i2c3_boardinfo));
+	if (ret)
+		pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
 }
 
 static struct omap_musb_board_data musb_board_data = {
@@ -476,9 +581,57 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
+
+static void __init igep2_wlan_bt_init(void)
+{
+	unsigned npd, wreset, btreset;
+
+	/* GPIO's for WLAN-BT combo depends on hardware revision */
+	if (hwrev == IGEP2_BOARD_HWREV_B) {
+		npd = IGEP2_RB_GPIO_WIFI_NPD;
+		wreset = IGEP2_RB_GPIO_WIFI_NRESET;
+		btreset = IGEP2_RB_GPIO_BT_NRESET;
+	} else if (hwrev == IGEP2_BOARD_HWREV_C) {
+		npd = IGEP2_RC_GPIO_WIFI_NPD;
+		wreset = IGEP2_RC_GPIO_WIFI_NRESET;
+		btreset = IGEP2_RC_GPIO_BT_NRESET;
+	} else
+		return;
+
+	/* Set GPIO's for  WLAN-BT combo module */
+	if ((gpio_request(npd, "GPIO_WIFI_NPD") == 0) &&
+	    (gpio_direction_output(npd, 1) == 0)) {
+		gpio_export(npd, 0);
+	} else
+		pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NPD\n");
+
+	if ((gpio_request(wreset, "GPIO_WIFI_NRESET") == 0) &&
+	    (gpio_direction_output(wreset, 1) == 0)) {
+		gpio_export(wreset, 0);
+		gpio_set_value(wreset, 0);
+		udelay(10);
+		gpio_set_value(wreset, 1);
+	} else
+		pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NRESET\n");
+
+	if ((gpio_request(btreset, "GPIO_BT_NRESET") == 0) &&
+	    (gpio_direction_output(btreset, 1) == 0)) {
+		gpio_export(btreset, 0);
+	} else
+		pr_warning("IGEP2: Could not obtain gpio GPIO_BT_NRESET\n");
+}
+#else
+static inline void __init igep2_wlan_bt_init(void) { }
+#endif
+
 static void __init igep2_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
+	/* Get IGEP2 hardware revision */
+	igep2_get_revision();
+	/* Register I2C busses and drivers */
 	igep2_i2c_init();
 	platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
 	omap_serial_init();
@@ -486,63 +639,22 @@ static void __init igep2_init(void)
 	usb_ehci_init(&ehci_pdata);
 
 	igep2_flash_init();
-	igep2_init_led();
+	igep2_leds_init();
 	igep2_display_init();
 	igep2_init_smsc911x();
 
-	/* GPIO userspace leds */
-#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
-	if ((gpio_request(IGEP2_GPIO_LED0_RED, "led0:red") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
-		gpio_export(IGEP2_GPIO_LED0_RED, 0);
-		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
-	} else
-		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
-
-	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "led0:green") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
-		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
-		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
-	} else
-		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
-
-	if ((gpio_request(IGEP2_GPIO_LED1_RED, "led1:red") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
-		gpio_export(IGEP2_GPIO_LED1_RED, 0);
-		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
-	} else
-		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
-#endif
-
-	/* GPIO W-LAN + Bluetooth combo module */
-	if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) {
-		gpio_export(IGEP2_GPIO_WIFI_NPD, 0);
-/* 		gpio_set_value(IGEP2_GPIO_WIFI_NPD, 0); */
-	} else
-		pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NPD\n");
-
-	if ((gpio_request(IGEP2_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_WIFI_NRESET, 1) == 0)) {
-		gpio_export(IGEP2_GPIO_WIFI_NRESET, 0);
-		gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 0);
-		udelay(10);
-		gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 1);
-	} else
-		pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n");
-}
+	/*
+	 * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
+	 */
+	igep2_wlan_bt_init();
 
-static void __init igep2_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
 }
 
 MACHINE_START(IGEP0020, "IGEP v2 board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= igep2_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= igep2_init_irq,
 	.init_machine	= igep2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
new file mode 100644
index 000000000000..22b0b253e16b
--- /dev/null
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -0,0 +1,400 @@
+/*
+ * Copyright (C) 2010 - ISEE 2007 SL
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+#include <plat/onenand.h>
+
+#include "mux.h"
+#include "hsmmc.h"
+#include "sdram-numonyx-m65kxxxxam.h"
+
+#define IGEP3_GPIO_LED0_GREEN	54
+#define IGEP3_GPIO_LED0_RED	53
+#define IGEP3_GPIO_LED1_RED	16
+
+#define IGEP3_GPIO_WIFI_NPD	138
+#define IGEP3_GPIO_WIFI_NRESET	139
+#define IGEP3_GPIO_BT_NRESET	137
+
+#define IGEP3_GPIO_USBH_NRESET  115
+
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+#define ONENAND_MAP             0x20000000
+
+/*
+ * x2 Flash built-in COMBO POP MEMORY
+ * Since the device is equipped with two DataRAMs, and two-plane NAND
+ * Flash memory array, these two component enables simultaneous program
+ * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
+ * while Plane2 has only odd blocks such as block1, block3, block5.
+ * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
+ */
+
+static struct mtd_partition igep3_onenand_partitions[] = {
+	{
+		.name           = "X-Loader",
+		.offset         = 0,
+		.size           = 2 * (64*(2*2048))
+	},
+	{
+		.name           = "U-Boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 6 * (64*(2*2048)),
+	},
+	{
+		.name           = "Environment",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 2 * (64*(2*2048)),
+	},
+	{
+		.name           = "Kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 12 * (64*(2*2048)),
+	},
+	{
+		.name           = "File System",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data igep3_onenand_pdata = {
+	.parts = igep3_onenand_partitions,
+	.nr_parts = ARRAY_SIZE(igep3_onenand_partitions),
+	.onenand_setup = NULL,
+	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
+};
+
+static struct platform_device igep3_onenand_device = {
+	.name		= "omap2-onenand",
+	.id		= -1,
+	.dev = {
+		.platform_data = &igep3_onenand_pdata,
+	},
+};
+
+void __init igep3_flash_init(void)
+{
+	u8 cs = 0;
+	u8 onenandcs = GPMC_CS_NUM + 1;
+
+	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+		u32 ret;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		/* Check if NAND/oneNAND is configured */
+		if ((ret & 0xC00) == 0x800)
+			/* NAND found */
+			pr_err("IGEP3: Unsupported NAND found\n");
+		else {
+			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+
+			if ((ret & 0x3F) == (ONENAND_MAP >> 24))
+				/* OneNAND found */
+				onenandcs = cs;
+		}
+	}
+
+	if (onenandcs > GPMC_CS_NUM) {
+		pr_err("IGEP3: Unable to find configuration in GPMC\n");
+		return;
+	}
+
+	igep3_onenand_pdata.cs = onenandcs;
+
+	if (platform_device_register(&igep3_onenand_device) < 0)
+		pr_err("IGEP3: Unable to register OneNAND device\n");
+}
+
+#else
+void __init igep3_flash_init(void) {}
+#endif
+
+static struct regulator_consumer_supply igep3_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data igep3_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &igep3_vmmc1_supply,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	[0] = {
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
+	[1] = {
+		.mmc		= 2,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+#endif
+	{}      /* Terminator */
+};
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led igep3_gpio_leds[] = {
+	[0] = {
+		.name			= "gpio-led:red:d0",
+		.gpio			= IGEP3_GPIO_LED0_RED,
+		.default_trigger	= "default-off"
+	},
+	[1] = {
+		.name			= "gpio-led:green:d0",
+		.gpio			= IGEP3_GPIO_LED0_GREEN,
+		.default_trigger	= "default-off",
+	},
+	[2] = {
+		.name			= "gpio-led:red:d1",
+		.gpio			= IGEP3_GPIO_LED1_RED,
+		.default_trigger	= "default-off",
+	},
+	[3] = {
+		.name			= "gpio-led:green:d1",
+		.default_trigger	= "heartbeat",
+		.gpio			= -EINVAL, /* gets replaced */
+	},
+};
+
+static struct gpio_led_platform_data igep3_led_pdata = {
+	.leds           = igep3_gpio_leds,
+	.num_leds       = ARRAY_SIZE(igep3_gpio_leds),
+};
+
+static struct platform_device igep3_led_device = {
+	 .name   = "leds-gpio",
+	 .id     = -1,
+	 .dev    = {
+		 .platform_data = &igep3_led_pdata,
+	},
+};
+
+static void __init igep3_leds_init(void)
+{
+	platform_device_register(&igep3_led_device);
+}
+
+#else
+static inline void igep3_leds_init(void)
+{
+	if ((gpio_request(IGEP3_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&
+	    (gpio_direction_output(IGEP3_GPIO_LED0_RED, 1) == 0)) {
+		gpio_export(IGEP3_GPIO_LED0_RED, 0);
+		gpio_set_value(IGEP3_GPIO_LED0_RED, 1);
+	} else
+		pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_RED\n");
+
+	if ((gpio_request(IGEP3_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&
+	    (gpio_direction_output(IGEP3_GPIO_LED0_GREEN, 1) == 0)) {
+		gpio_export(IGEP3_GPIO_LED0_GREEN, 0);
+		gpio_set_value(IGEP3_GPIO_LED0_GREEN, 1);
+	} else
+		pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_GREEN\n");
+
+	if ((gpio_request(IGEP3_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&
+		(gpio_direction_output(IGEP3_GPIO_LED1_RED, 1) == 0)) {
+		gpio_export(IGEP3_GPIO_LED1_RED, 0);
+		gpio_set_value(IGEP3_GPIO_LED1_RED, 1);
+	} else
+		pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_RED\n");
+}
+#endif
+
+static int igep3_twl4030_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	omap2_hsmmc_init(mmc);
+
+	/*
+	 * link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	 */
+	igep3_vmmc1_supply.dev = mmc[0].dev;
+
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
+	if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
+	    && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {
+		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
+		gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);
+	} else
+		pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n");
+#else
+	igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
+#endif
+
+	return 0;
+};
+
+static struct twl4030_gpio_platform_data igep3_twl4030_gpio_pdata = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.setup		= igep3_twl4030_gpio_setup,
+};
+
+static struct twl4030_usb_data igep3_twl4030_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static void __init igep3_init_irq(void)
+{
+	omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct twl4030_platform_data igep3_twl4030_pdata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.usb		= &igep3_twl4030_usb_data,
+	.gpio		= &igep3_twl4030_gpio_pdata,
+	.vmmc1		= &igep3_vmmc1,
+};
+
+static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &igep3_twl4030_pdata,
+	},
+};
+
+static int __init igep3_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, igep3_i2c_boardinfo,
+			ARRAY_SIZE(igep3_i2c_boardinfo));
+
+	return 0;
+}
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type	= MUSB_INTERFACE_ULPI,
+	.mode		= MUSB_OTG,
+	.power		= 100,
+};
+
+#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
+
+static void __init igep3_wifi_bt_init(void)
+{
+	/* Configure MUX values for W-LAN + Bluetooth GPIO's */
+	omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT);
+
+	/* Set GPIO's for  W-LAN + Bluetooth combo module */
+	if ((gpio_request(IGEP3_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
+	    (gpio_direction_output(IGEP3_GPIO_WIFI_NPD, 1) == 0)) {
+		gpio_export(IGEP3_GPIO_WIFI_NPD, 0);
+	} else
+		pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NPD\n");
+
+	if ((gpio_request(IGEP3_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) &&
+	    (gpio_direction_output(IGEP3_GPIO_WIFI_NRESET, 1) == 0)) {
+		gpio_export(IGEP3_GPIO_WIFI_NRESET, 0);
+		gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0);
+		udelay(10);
+		gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1);
+	} else
+		pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NRESET\n");
+
+	if ((gpio_request(IGEP3_GPIO_BT_NRESET, "GPIO_BT_NRESET") == 0) &&
+	    (gpio_direction_output(IGEP3_GPIO_BT_NRESET, 1) == 0)) {
+		gpio_export(IGEP3_GPIO_BT_NRESET, 0);
+	} else
+		pr_warning("IGEP3: Could not obtain gpio GPIO_BT_NRESET\n");
+}
+#else
+void __init igep3_wifi_bt_init(void) {}
+#endif
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init igep3_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
+	/* Register I2C busses and drivers */
+	igep3_i2c_init();
+
+	omap_serial_init();
+	usb_musb_init(&musb_board_data);
+
+	igep3_flash_init();
+	igep3_leds_init();
+
+	/*
+	 * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+	 * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
+	 */
+	igep3_wifi_bt_init();
+
+}
+
+MACHINE_START(IGEP0030, "IGEP OMAP3 module")
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_map_io,
+	.init_irq	= igep3_init_irq,
+	.init_machine	= igep3_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index fefd7e6e9779..001fd9713f39 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -27,6 +27,7 @@
 #include <linux/i2c/twl.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -38,13 +39,15 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
+#include <mach/board-zoom.h>
 
 #include <asm/delay.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 
+#include "board-flash.h"
 #include "mux.h"
 #include "hsmmc.h"
+#include "control.h"
 
 #define LDP_SMSC911X_CS		1
 #define LDP_SMSC911X_GPIO	152
@@ -81,7 +84,7 @@ static struct platform_device ldp_smsc911x_device = {
 	},
 };
 
-static int board_keymap[] = {
+static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_1),
 	KEY(1, 0, KEY_2),
 	KEY(2, 0, KEY_3),
@@ -361,7 +364,7 @@ static int __init omap_i2c_init(void)
 static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.mmc		= 1,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 	},
@@ -388,6 +391,38 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
+static struct mtd_partition ldp_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "File System - NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= MTDPART_SIZ_FULL,	/* 96MB, 0x6000000 */
+	},
+
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -400,23 +435,18 @@ static void __init omap_ldp_init(void)
 	ads7846_dev_init();
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
+	board_nand_init(ldp_nand_partitions,
+		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS);
 
 	omap2_hsmmc_init(mmc);
 	/* link regulators to MMC adapters */
 	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
-static void __init omap_ldp_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_ldp_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_ldp_init_irq,
 	.init_machine	= omap_ldp_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 3ccc34ebdcc7..e823c7042ab3 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -20,6 +20,7 @@
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/musb.h>
+#include <sound/tlv320aic3x.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -33,6 +34,8 @@
 #include <plat/mmc.h>
 #include <plat/serial.h>
 
+#include "mux.h"
+
 static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
@@ -381,15 +384,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
 }
 
-void n8x0_mmc_slot1_cover_handler(void *arg, int closed_state)
-{
-	if (mmc_device == NULL)
-		return;
-
-	slot1_cover_open = !closed_state;
-	omap_mmc_notify_cover_event(mmc_device, 0, closed_state);
-}
-
 static int n8x0_mmc_late_init(struct device *dev)
 {
 	int r, bit, *openp;
@@ -509,7 +503,7 @@ static struct omap_mmc_platform_data mmc1_data = {
 
 static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
 
-void __init n8x0_mmc_init(void)
+static void __init n8x0_mmc_init(void)
 
 {
 	int err;
@@ -558,11 +552,6 @@ void __init n8x0_mmc_init(void)
 void __init n8x0_mmc_init(void)
 {
 }
-
-void n8x0_mmc_slot1_cover_handler(void *arg, int state)
-{
-}
-
 #endif	/* CONFIG_MMC_OMAP */
 
 #ifdef CONFIG_MENELAUS
@@ -612,29 +601,35 @@ static int n8x0_menelaus_late_init(struct device *dev)
 	return 0;
 }
 
-static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] = {
+#else
+static int n8x0_menelaus_late_init(struct device *dev)
+{
+	return 0;
+}
+#endif
+
+static struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
+	.late_init = n8x0_menelaus_late_init,
+};
+
+static struct i2c_board_info __initdata n8x0_i2c_board_info_1[] __initdata = {
 	{
 		I2C_BOARD_INFO("menelaus", 0x72),
 		.irq = INT_24XX_SYS_NIRQ,
+		.platform_data = &n8x0_menelaus_platform_data,
 	},
 };
 
-static struct menelaus_platform_data n8x0_menelaus_platform_data = {
-	.late_init = n8x0_menelaus_late_init,
+static struct aic3x_pdata n810_aic33_data __initdata = {
+	.gpio_reset = 118,
 };
 
-static void __init n8x0_menelaus_init(void)
-{
-	n8x0_i2c_board_info_1[0].platform_data = &n8x0_menelaus_platform_data;
-	omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
-			      ARRAY_SIZE(n8x0_i2c_board_info_1));
-}
-
-#else
-static inline void __init n8x0_menelaus_init(void)
-{
-}
-#endif
+static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+		.platform_data = &n810_aic33_data,
+	},
+};
 
 static void __init n8x0_map_io(void)
 {
@@ -649,44 +644,60 @@ static void __init n8x0_init_irq(void)
 	omap_gpio_init();
 }
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	/* I2S codec port pins for McBSP block */
+	OMAP2420_MUX(EAC_AC_SCLK, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP2420_MUX(EAC_AC_FS, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP2420_MUX(EAC_AC_DIN, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init n8x0_init_machine(void)
 {
+	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
 	/* FIXME: add n810 spi devices */
 	spi_register_board_info(n800_spi_board_info,
 				ARRAY_SIZE(n800_spi_board_info));
+	omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
+			      ARRAY_SIZE(n8x0_i2c_board_info_1));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	if (machine_is_nokia_n810())
+		i2c_register_board_info(2, n810_i2c_board_info_2,
+					ARRAY_SIZE(n810_i2c_board_info_2));
 
 	omap_serial_init();
-	n8x0_menelaus_init();
 	n8x0_onenand_init();
 	n8x0_mmc_init();
 	n8x0_usb_init();
 }
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 69b154cdc75d..14f42240ae79 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -27,6 +27,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -43,16 +44,100 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/timer-gp.h>
 
 #include "mux.h"
 #include "hsmmc.h"
-
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
+#include "timer-gp.h"
 
 #define NAND_BLOCK_SIZE		SZ_128K
 
+/*
+ * OMAP3 Beagle revision
+ * Run time detection of Beagle revision is done by reading GPIO.
+ * GPIO ID -
+ *	AXBX	= GPIO173, GPIO172, GPIO171: 1 1 1
+ *	C1_3	= GPIO173, GPIO172, GPIO171: 1 1 0
+ *	C4	= GPIO173, GPIO172, GPIO171: 1 0 1
+ *	XM	= GPIO173, GPIO172, GPIO171: 0 0 0
+ */
+enum {
+	OMAP3BEAGLE_BOARD_UNKN = 0,
+	OMAP3BEAGLE_BOARD_AXBX,
+	OMAP3BEAGLE_BOARD_C1_3,
+	OMAP3BEAGLE_BOARD_C4,
+	OMAP3BEAGLE_BOARD_XM,
+};
+
+static u8 omap3_beagle_version;
+
+static u8 omap3_beagle_get_rev(void)
+{
+	return omap3_beagle_version;
+}
+
+static void __init omap3_beagle_init_rev(void)
+{
+	int ret;
+	u16 beagle_rev = 0;
+
+	omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP);
+
+	ret = gpio_request(171, "rev_id_0");
+	if (ret < 0)
+		goto fail0;
+
+	ret = gpio_request(172, "rev_id_1");
+	if (ret < 0)
+		goto fail1;
+
+	ret = gpio_request(173, "rev_id_2");
+	if (ret < 0)
+		goto fail2;
+
+	gpio_direction_input(171);
+	gpio_direction_input(172);
+	gpio_direction_input(173);
+
+	beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
+			| (gpio_get_value(173) << 2);
+
+	switch (beagle_rev) {
+	case 7:
+		printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
+		break;
+	case 6:
+		printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
+		break;
+	case 5:
+		printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
+		break;
+	case 0:
+		printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
+		break;
+	default:
+		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
+		omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+	}
+
+	return;
+
+fail2:
+	gpio_free(172);
+fail1:
+	gpio_free(171);
+fail0:
+	printk(KERN_ERR "Unable to get revision detection GPIO pins\n");
+	omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
+
+	return;
+}
+
 static struct mtd_partition omap3beagle_nand_partitions[] = {
 	/* All the partition sizes are listed in terms of NAND block size */
 	{
@@ -93,20 +178,6 @@ static struct omap_nand_platform_data omap3beagle_nand_data = {
 	.dev_ready	= NULL,
 };
 
-static struct resource omap3beagle_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device omap3beagle_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &omap3beagle_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &omap3beagle_nand_resource,
-};
-
 /* DSS */
 
 static int beagle_enable_dvi(struct omap_dss_device *dssdev)
@@ -183,7 +254,7 @@ static void __init beagle_display_init(void)
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.wires		= 8,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 29,
 	},
 	{}	/* Terminator */
@@ -202,7 +273,10 @@ static struct gpio_led gpio_leds[];
 static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
-	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+		mmc[0].gpio_wp = -EINVAL;
+	} else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
+		(omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
 		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 		mmc[0].gpio_wp = 23;
 	} else {
@@ -339,13 +413,19 @@ static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
 	},
 };
 
+static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
+       {
+               I2C_BOARD_INFO("eeprom", 0x50),
+       },
+};
+
 static int __init omap3_beagle_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
 			ARRAY_SIZE(beagle_i2c_boardinfo));
 	/* Bus 3 is attached to the DVI port where devices like the pico DLP
 	 * projector don't work reliably with 400kHz */
-	omap_register_i2c_bus(3, 100, NULL, 0);
+	omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom));
 	return 0;
 }
 
@@ -424,8 +504,6 @@ static void __init omap3beagle_flash_init(void)
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -447,12 +525,9 @@ static void __init omap3beagle_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		omap3beagle_nand_data.cs = nandcs;
-		omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&omap3beagle_nand_device) < 0)
+		if (gpmc_nand_init(&omap3beagle_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -486,6 +561,7 @@ static struct omap_musb_board_data musb_board_data = {
 static void __init omap3_beagle_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap3_beagle_init_rev();
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
@@ -507,18 +583,11 @@ static void __init omap3_beagle_init(void)
 	beagle_display_init();
 }
 
-static void __init omap3_beagle_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_beagle_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b95261013812..b04365c6bb10 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -31,6 +31,7 @@
 #include <linux/smsc911x.h>
 
 #include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -370,7 +371,7 @@ static struct regulator_init_data omap3evm_vsim = {
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= 63,
 	},
@@ -446,7 +447,7 @@ static struct twl4030_usb_data omap3evm_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static int board_keymap[] = {
+static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_DOWN),
 	KEY(0, 2, KEY_ENTER),
@@ -514,14 +515,11 @@ static struct regulator_init_data omap3_evm_vdac = {
 };
 
 /* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_evm_vpll2_supply = {
-	.supply		= "vdvi",
-	.dev		= &omap3_evm_lcd_device.dev,
-};
+static struct regulator_consumer_supply omap3_evm_vpll2_supply =
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
 
 static struct regulator_init_data omap3_evm_vpll2 = {
 	.constraints = {
-		.name			= "VDVI",
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
 		.apply_uV		= true,
@@ -587,7 +585,7 @@ static int ads7846_get_pendown_state(void)
 	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
 }
 
-struct ads7846_platform_data ads7846_config = {
+static struct ads7846_platform_data ads7846_config = {
 	.x_max			= 0x0fff,
 	.y_max			= 0x0fff,
 	.x_plate_ohms		= 180,
@@ -606,7 +604,7 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.single_channel	= 1,	/* 0: slave, 1: master */
 };
 
-struct spi_board_info omap3evm_spi_board_info[] = {
+static struct spi_board_info omap3evm_spi_board_info[] = {
 	[0] = {
 		.modalias		= "ads7846",
 		.bus_num		= 1,
@@ -715,18 +713,11 @@ static void __init omap3_evm_init(void)
 	omap3_evm_display_init();
 }
 
-static void __init omap3_evm_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_evm_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3_evm_init_irq,
 	.init_machine	= omap3_evm_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
new file mode 100644
index 000000000000..5f7d2c1e7ef5
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -0,0 +1,241 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3logic.c
+ *
+ * Copyright (C) 2010 Li-Pro.Net
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * Copyright (C) 2010 Logic Product Development, Inc.
+ * Peter Barada <peter.barada@logicpd.com>
+ *
+ * Modified from Beagle, EVM, and RX51
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <linux/regulator/machine.h>
+
+#include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "mux.h"
+#include "hsmmc.h"
+#include "timer-gp.h"
+#include "control.h"
+
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc-smsc911x.h>
+#include <plat/gpmc.h>
+#include <plat/sdrc.h>
+
+#define OMAP3LOGIC_SMSC911X_CS			1
+
+#define OMAP3530_LV_SOM_MMC_GPIO_CD		110
+#define OMAP3530_LV_SOM_MMC_GPIO_WP		126
+#define OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ	152
+
+#define OMAP3_TORPEDO_MMC_GPIO_CD		127
+#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ		129
+
+static struct regulator_consumer_supply omap3logic_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3logic_vmmc1 = {
+	.constraints = {
+		.name			= "VMMC1",
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &omap3logic_vmmc1_supply,
+};
+
+static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.pullups	= BIT(1),
+	.pulldowns	= BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)
+			| BIT(13) | BIT(15) | BIT(16) | BIT(17),
+};
+
+static struct twl4030_platform_data omap3logic_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.gpio		= &omap3logic_gpio_data,
+	.vmmc1		= &omap3logic_vmmc1,
+};
+
+static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &omap3logic_twldata,
+	},
+};
+
+static int __init omap3logic_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo,
+				ARRAY_SIZE(omap3logic_i2c_boardinfo));
+	return 0;
+}
+
+static struct omap2_hsmmc_info __initdata board_mmc_info[] = {
+	{
+		.name		= "external",
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}      /* Terminator */
+};
+
+static void __init board_mmc_init(void)
+{
+	if (machine_is_omap3530_lv_som()) {
+		/* OMAP3530 LV SOM board */
+		board_mmc_info[0].gpio_cd = OMAP3530_LV_SOM_MMC_GPIO_CD;
+		board_mmc_info[0].gpio_wp = OMAP3530_LV_SOM_MMC_GPIO_WP;
+		omap_mux_init_signal("gpio_110", OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("gpio_126", OMAP_PIN_OUTPUT);
+	} else if (machine_is_omap3_torpedo()) {
+		/* OMAP3 Torpedo board */
+		board_mmc_info[0].gpio_cd = OMAP3_TORPEDO_MMC_GPIO_CD;
+		omap_mux_init_signal("gpio_127", OMAP_PIN_OUTPUT);
+	} else {
+		/* unsupported board */
+		printk(KERN_ERR "%s(): unknown machine type\n", __func__);
+		return;
+	}
+
+	omap2_hsmmc_init(board_mmc_info);
+	/* link regulators to MMC adapters */
+	omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
+}
+
+static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
+	.cs             = OMAP3LOGIC_SMSC911X_CS,
+	.gpio_irq       = -EINVAL,
+	.gpio_reset     = -EINVAL,
+	.flags          = IORESOURCE_IRQ_LOWLEVEL,
+};
+
+/* TODO/FIXME (comment by Peter Barada, LogicPD):
+ * Fix the PBIAS voltage for Torpedo MMC1 pins that
+ * are used for other needs (IRQs, etc).            */
+static void omap3torpedo_fix_pbias_voltage(void)
+{
+	u16 control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
+	u32 reg;
+
+	if (machine_is_omap3_torpedo())
+	{
+		/* Set the bias for the pin */
+		reg = omap_ctrl_readl(control_pbias_offset);
+
+		reg &= ~OMAP343X_PBIASLITEPWRDNZ1;
+		omap_ctrl_writel(reg, control_pbias_offset);
+
+		/* 100ms delay required for PBIAS configuration */
+		msleep(100);
+
+		reg |= OMAP343X_PBIASLITEVMODE1;
+		reg |= OMAP343X_PBIASLITEPWRDNZ1;
+		omap_ctrl_writel(reg | 0x300, control_pbias_offset);
+	}
+}
+
+static inline void __init board_smsc911x_init(void)
+{
+	if (machine_is_omap3530_lv_som()) {
+		/* OMAP3530 LV SOM board */
+		board_smsc911x_data.gpio_irq =
+					OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ;
+		omap_mux_init_signal("gpio_152", OMAP_PIN_INPUT);
+	} else if (machine_is_omap3_torpedo()) {
+		/* OMAP3 Torpedo board */
+		board_smsc911x_data.gpio_irq = OMAP3_TORPEDO_SMSC911X_GPIO_IRQ;
+		omap_mux_init_signal("gpio_129", OMAP_PIN_INPUT);
+	} else {
+		/* unsupported board */
+		printk(KERN_ERR "%s(): unknown machine type\n", __func__);
+		return;
+	}
+
+	gpmc_smsc911x_init(&board_smsc911x_data);
+}
+
+static void __init omap3logic_init_irq(void)
+{
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux       NULL
+#endif
+
+static void __init omap3logic_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap3torpedo_fix_pbias_voltage();
+	omap3logic_i2c_init();
+	omap_serial_init();
+	board_mmc_init();
+	board_smsc911x_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+}
+
+MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_map_io,
+	.init_irq	= omap3logic_init_irq,
+	.init_machine	= omap3logic_init,
+	.timer		= &omap_timer,
+MACHINE_END
+
+MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_map_io,
+	.init_irq	= omap3logic_init_irq,
+	.init_machine	= omap3logic_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index db06dc910ba7..89ed1be2d62e 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -25,10 +25,16 @@
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
+#include <linux/wl12xx.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 #include <linux/leds.h>
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/regulator/fixed.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,15 +47,49 @@
 #include <plat/mcspi.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/nand.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 
+#define PANDORA_WIFI_IRQ_GPIO		21
+#define PANDORA_WIFI_NRESET_GPIO	23
 #define OMAP3_PANDORA_TS_GPIO		94
 
-/* hardware debounce: (value + 1) * 31us */
-#define GPIO_DEBOUNCE_TIME		127
+#define NAND_BLOCK_SIZE			SZ_128K
+
+static struct mtd_partition omap3pandora_nand_partitions[] = {
+	{
+		.name           = "xloader",
+		.offset         = 0,
+		.size           = 4 * NAND_BLOCK_SIZE,
+		.mask_flags     = MTD_WRITEABLE
+	}, {
+		.name           = "uboot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 15 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "uboot-env",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 1 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 80 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data pandora_nand_data = {
+	.cs		= 0,
+	.devsize	= 1,	/* '0' for 8-bit, '1' for 16-bit device */
+	.parts		= omap3pandora_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
+};
 
 static struct gpio_led pandora_gpio_leds[] = {
 	{
@@ -88,6 +128,7 @@ static struct platform_device pandora_leds_gpio = {
 	.type		= ev_type,				\
 	.code		= ev_code,				\
 	.active_low	= act_low,				\
+	.debounce_interval = 4,					\
 	.desc		= "btn " descr,				\
 }
 
@@ -99,14 +140,14 @@ static struct gpio_keys_button pandora_gpio_keys[] = {
 	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
 	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
 	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
-	GPIO_BUTTON_LOW(109,	KEY_KP1,	"game 1"),
-	GPIO_BUTTON_LOW(111,	KEY_KP2,	"game 2"),
-	GPIO_BUTTON_LOW(106,	KEY_KP3,	"game 3"),
-	GPIO_BUTTON_LOW(101,	KEY_KP4,	"game 4"),
-	GPIO_BUTTON_LOW(102,	BTN_TL,		"l"),
-	GPIO_BUTTON_LOW(97,	BTN_TL2,	"l2"),
-	GPIO_BUTTON_LOW(105,	BTN_TR,		"r"),
-	GPIO_BUTTON_LOW(107,	BTN_TR2,	"r2"),
+	GPIO_BUTTON_LOW(109,	KEY_PAGEUP,	"game 1"),
+	GPIO_BUTTON_LOW(111,	KEY_END,	"game 2"),
+	GPIO_BUTTON_LOW(106,	KEY_PAGEDOWN,	"game 3"),
+	GPIO_BUTTON_LOW(101,	KEY_HOME,	"game 4"),
+	GPIO_BUTTON_LOW(102,	KEY_RIGHTSHIFT,	"l"),
+	GPIO_BUTTON_LOW(97,	KEY_KPPLUS,	"l2"),
+	GPIO_BUTTON_LOW(105,	KEY_RIGHTCTRL,	"r"),
+	GPIO_BUTTON_LOW(107,	KEY_KPMINUS,	"r2"),
 	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
 	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
 	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
@@ -127,14 +168,7 @@ static struct platform_device pandora_keys_gpio = {
 	},
 };
 
-static void __init pandora_keys_gpio_init(void)
-{
-	/* set debounce time for GPIO banks 4 and 6 */
-	gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME);
-	gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME);
-}
-
-static int board_keymap[] = {
+static const uint32_t board_keymap[] = {
 	/* row, col, code */
 	KEY(0, 0, KEY_9),
 	KEY(0, 1, KEY_8),
@@ -227,17 +261,31 @@ static struct platform_device pandora_dss_device = {
 	},
 };
 
+static void pandora_wl1251_init_card(struct mmc_card *card)
+{
+	/*
+	 * We have TI wl1251 attached to MMC3. Pass this information to
+	 * SDIO core because it can't be probed by normal methods.
+	 */
+	card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+	card->cccr.wide_bus = 1;
+	card->cis.vendor = 0x104c;
+	card->cis.device = 0x9066;
+	card->cis.blksize = 512;
+	card->cis.max_dtr = 20000000;
+}
+
 static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 	{
 		.mmc		= 1,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= 126,
 		.ext_clock	= 0,
 	},
 	{
 		.mmc		= 2,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= 127,
 		.ext_clock	= 1,
@@ -245,9 +293,10 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 	},
 	{
 		.mmc		= 3,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
+		.init_card	= pandora_wl1251_init_card,
 	},
 	{}	/* Terminator */
 };
@@ -255,12 +304,33 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	int ret, gpio_32khz;
+
 	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
 	omap3pandora_mmc[0].gpio_cd = gpio + 0;
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
 	omap2_hsmmc_init(omap3pandora_mmc);
 
+	/* gpio + 13 drives 32kHz buffer for wifi module */
+	gpio_32khz = gpio + 13;
+	ret = gpio_request(gpio_32khz, "wifi 32kHz");
+	if (ret < 0) {
+		pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
+		goto fail;
+	}
+
+	ret = gpio_direction_output(gpio_32khz, 1);
+	if (ret < 0) {
+		pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret);
+		goto fail_direction;
+	}
+
 	return 0;
+
+fail_direction:
+	gpio_free(gpio_32khz);
+fail:
+	return -ENODEV;
 }
 
 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
@@ -276,6 +346,9 @@ static struct regulator_consumer_supply pandora_vmmc1_supply =
 static struct regulator_consumer_supply pandora_vmmc2_supply =
 	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
 
+static struct regulator_consumer_supply pandora_vmmc3_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.2");
+
 static struct regulator_consumer_supply pandora_vdda_dac_supply =
 	REGULATOR_SUPPLY("vdda_dac", "omapdss");
 
@@ -420,6 +493,33 @@ static struct regulator_init_data pandora_vsim = {
 	.consumer_supplies	= &pandora_adac_supply,
 };
 
+/* Fixed regulator internal to Wifi module */
+static struct regulator_init_data pandora_vmmc3 = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &pandora_vmmc3_supply,
+};
+
+static struct fixed_voltage_config pandora_vwlan = {
+	.supply_name		= "vwlan",
+	.microvolts		= 1800000, /* 1.8V */
+	.gpio			= PANDORA_WIFI_NRESET_GPIO,
+	.startup_delay		= 50000, /* 50ms */
+	.enable_high		= 1,
+	.enabled_at_boot	= 0,
+	.init_data		= &pandora_vmmc3,
+};
+
+static struct platform_device pandora_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &pandora_vwlan,
+	},
+};
+
 static struct twl4030_usb_data omap3pandora_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
@@ -433,6 +533,8 @@ static struct twl4030_codec_data omap3pandora_codec_data = {
 	.audio = &omap3pandora_audio_data,
 };
 
+static struct twl4030_bci_platform_data pandora_bci_data;
+
 static struct twl4030_platform_data omap3pandora_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -448,6 +550,7 @@ static struct twl4030_platform_data omap3pandora_twldata = {
 	.vaux4		= &pandora_vaux4,
 	.vsim		= &pandora_vsim,
 	.keypad		= &pandora_kp_data,
+	.bci		= &pandora_bci_data,
 };
 
 static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
@@ -539,10 +642,57 @@ static void __init omap3pandora_init_irq(void)
 	omap_gpio_init();
 }
 
+static void pandora_wl1251_set_power(bool enable)
+{
+	/*
+	 * Keep power always on until wl1251_sdio driver learns to re-init
+	 * the chip after powering it down and back up.
+	 */
+}
+
+static struct wl12xx_platform_data pandora_wl1251_pdata = {
+	.set_power	= pandora_wl1251_set_power,
+	.use_eeprom	= true,
+};
+
+static struct platform_device pandora_wl1251_data = {
+	.name           = "wl1251_data",
+	.id             = -1,
+	.dev		= {
+		.platform_data	= &pandora_wl1251_pdata,
+	},
+};
+
+static void pandora_wl1251_init(void)
+{
+	int ret;
+
+	ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
+	if (ret < 0)
+		goto fail;
+
+	ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO);
+	if (ret < 0)
+		goto fail_irq;
+
+	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
+	if (pandora_wl1251_pdata.irq < 0)
+		goto fail_irq;
+
+	return;
+
+fail_irq:
+	gpio_free(PANDORA_WIFI_IRQ_GPIO);
+fail:
+	printk(KERN_ERR "wl1251 board initialisation failed\n");
+}
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
 	&pandora_dss_device,
+	&pandora_wl1251_data,
+	&pandora_vwlan_device,
 };
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -575,6 +725,7 @@ static void __init omap3pandora_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3pandora_i2c_init();
+	pandora_wl1251_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
 	omap_serial_init();
@@ -582,25 +733,18 @@ static void __init omap3pandora_init(void)
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
 	usb_ehci_init(&ehci_pdata);
-	pandora_keys_gpio_init();
 	usb_musb_init(&musb_board_data);
+	gpmc_nand_init(&pandora_nand_data);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3pandora_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3pandora_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3pandora_init_irq,
 	.init_machine	= omap3pandora_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index a04cffd691c5..f25272125413 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -26,6 +26,7 @@
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
+#include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -38,7 +39,6 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/timer-gp.h>
 #include <plat/display.h>
 
 #include <plat/mcspi.h>
@@ -52,6 +52,7 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mux.h"
 #include "hsmmc.h"
+#include "timer-gp.h"
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #define OMAP3STALKER_ETHR_START	0x2c000000
@@ -275,7 +276,7 @@ static struct regulator_init_data omap3stalker_vsim = {
 static struct omap2_hsmmc_info mmc[] = {
 	{
 	 .mmc		= 1,
-	 .wires		= 4,
+	 .caps		= MMC_CAP_4_BIT_DATA,
 	 .gpio_cd	= -EINVAL,
 	 .gpio_wp	= 23,
 	 },
@@ -389,7 +390,7 @@ static struct twl4030_usb_data omap3stalker_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static int board_keymap[] = {
+static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_DOWN),
 	KEY(0, 2, KEY_ENTER),
@@ -564,7 +565,7 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.single_channel		= 1,	/* 0: slave, 1: master */
 };
 
-struct spi_board_info omap3stalker_spi_board_info[] = {
+static struct spi_board_info omap3stalker_spi_board_info[] = {
 	[0] = {
 	       .modalias	= "ads7846",
 	       .bus_num		= 1,
@@ -652,18 +653,10 @@ static void __init omap3_stalker_init(void)
 	omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3_stalker_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(SBC3530, "OMAP3 STALKER")
 	/* Maintainer: Jason Lam -lzg@ema-tech.com */
-	.phys_io		= 0x48000000,
-	.io_pg_offst		= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params		= 0x80000100,
-	.map_io			= omap3_stalker_map_io,
+	.map_io			= omap3_map_io,
 	.init_irq		= omap3_stalker_init_irq,
 	.init_machine		= omap3_stalker_init,
 	.timer			= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 2f5f8233dd5b..41104bb8774c 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -27,6 +27,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
 
 #include <plat/mcspi.h>
 #include <linux/spi/spi.h>
@@ -47,16 +48,13 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/timer-gp.h>
 
 #include "mux.h"
 #include "hsmmc.h"
+#include "timer-gp.h"
 
 #include <asm/setup.h>
 
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
-
 #define NAND_BLOCK_SIZE		SZ_128K
 
 #define OMAP3_AC_GPIO		136
@@ -64,7 +62,7 @@
 #define TB_BL_PWM_TIMER		9
 #define TB_KILL_POWER_GPIO	168
 
-unsigned long touchbook_revision;
+static unsigned long touchbook_revision;
 
 static struct mtd_partition omap3touchbook_nand_partitions[] = {
 	/* All the partition sizes are listed in terms of NAND block size */
@@ -106,26 +104,12 @@ static struct omap_nand_platform_data omap3touchbook_nand_data = {
 	.dev_ready	= NULL,
 };
 
-static struct resource omap3touchbook_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device omap3touchbook_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &omap3touchbook_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &omap3touchbook_nand_resource,
-};
-
 #include "sdram-micron-mt46h32m32lf-6.h"
 
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.wires		= 8,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 29,
 	},
 	{}	/* Terminator */
@@ -458,8 +442,6 @@ static void __init omap3touchbook_flash_init(void)
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -481,13 +463,9 @@ static void __init omap3touchbook_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		omap3touchbook_nand_data.cs = nandcs;
-		omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		omap3touchbook_nand_data.gpmc_baseaddr =
-						(void *) (gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&omap3touchbook_nand_device) < 0)
+		if (gpmc_nand_init(&omap3touchbook_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -559,18 +537,11 @@ static void __init omap3_touchbook_init(void)
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3_touchbook_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_touchbook_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3_touchbook_init_irq,
 	.init_machine	= omap3_touchbook_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
new file mode 100644
index 000000000000..1ecd0a6cefb7
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -0,0 +1,398 @@
+/*
+ * Board support file for OMAP4430 based PandaBoard.
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: David Anders <x0132446@ti.com>
+ *
+ * Based on mach-omap2/board-4430sdp.c
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
+
+#include <mach/hardware.h>
+#include <mach/omap4-common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/usb.h>
+#include <plat/mmc.h>
+#include "timer-gp.h"
+
+#include "hsmmc.h"
+#include "control.h"
+
+#define GPIO_HUB_POWER		1
+#define GPIO_HUB_NRESET		62
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "pandaboard::status1",
+		.default_trigger	= "heartbeat",
+		.gpio			= 7,
+	},
+	{
+		.name			= "pandaboard::status2",
+		.default_trigger	= "mmc0",
+		.gpio			= 8,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct platform_device *panda_devices[] __initdata = {
+	&leds_gpio,
+};
+
+static void __init omap4_panda_init_irq(void)
+{
+	omap2_init_common_hw(NULL, NULL);
+	gic_init_irq();
+	omap_gpio_init();
+}
+
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.phy_reset  = false,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init omap4_ehci_init(void)
+{
+	int ret;
+
+
+	/* disable the power to the usb hub prior to init */
+	ret = gpio_request(GPIO_HUB_POWER, "hub_power");
+	if (ret) {
+		pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER);
+		goto error1;
+	}
+	gpio_export(GPIO_HUB_POWER, 0);
+	gpio_direction_output(GPIO_HUB_POWER, 0);
+	gpio_set_value(GPIO_HUB_POWER, 0);
+
+	/* reset phy+hub */
+	ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset");
+	if (ret) {
+		pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET);
+		goto error2;
+	}
+	gpio_export(GPIO_HUB_NRESET, 0);
+	gpio_direction_output(GPIO_HUB_NRESET, 0);
+	gpio_set_value(GPIO_HUB_NRESET, 0);
+	gpio_set_value(GPIO_HUB_NRESET, 1);
+
+	usb_ehci_init(&ehci_pdata);
+
+	/* enable power to hub */
+	gpio_set_value(GPIO_HUB_POWER, 1);
+	return;
+
+error2:
+	gpio_free(GPIO_HUB_POWER);
+error1:
+	pr_err("Unable to initialize EHCI power/reset\n");
+	return;
+
+}
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_UTMI,
+	.mode			= MUSB_PERIPHERAL,
+	.power			= 100,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
+	{
+		.supply = "vmmc",
+		.dev_name = "mmci-omap-hs.0",
+	},
+};
+
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_device *pdev = container_of(dev,
+				struct platform_device, dev);
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	if (!pdata) {
+		dev_err(dev, "%s: NULL platform data\n", __func__);
+		return -EINVAL;
+	}
+	/* Setting MMC1 Card detect Irq */
+	if (pdev->id == 0) {
+		ret = twl6030_mmc_card_detect_config();
+		 if (ret)
+			dev_err(dev, "%s: Error card detect config(%d)\n",
+				__func__, ret);
+		 else
+			pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+	}
+	return ret;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata;
+
+	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
+	if (!dev) {
+		pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
+		return;
+	}
+	pdata = dev->platform_data;
+
+	pdata->init =	omap4_twl6030_hsmmc_late_init;
+}
+
+static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+
+	omap2_hsmmc_init(controllers);
+	for (c = controllers; c->mmc; c++)
+		omap4_twl6030_hsmmc_set_late_init(c->dev);
+
+	return 0;
+}
+
+static struct regulator_init_data omap4_panda_vaux1 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vaux2 = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vaux3 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VMMC1 for MMC1 card */
+static struct regulator_init_data omap4_panda_vmmc = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = omap4_panda_vmmc_supply,
+};
+
+static struct regulator_init_data omap4_panda_vpp = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 2500000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vusim = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2900000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vana = {
+	.constraints = {
+		.min_uV			= 2100000,
+		.max_uV			= 2100000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vcxio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vusb = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct twl4030_platform_data omap4_panda_twldata = {
+	.irq_base	= TWL6030_IRQ_BASE,
+	.irq_end	= TWL6030_IRQ_END,
+
+	/* Regulators */
+	.vmmc		= &omap4_panda_vmmc,
+	.vpp		= &omap4_panda_vpp,
+	.vusim		= &omap4_panda_vusim,
+	.vana		= &omap4_panda_vana,
+	.vcxio		= &omap4_panda_vcxio,
+	.vdac		= &omap4_panda_vdac,
+	.vusb		= &omap4_panda_vusb,
+	.vaux1		= &omap4_panda_vaux1,
+	.vaux2		= &omap4_panda_vaux2,
+	.vaux3		= &omap4_panda_vaux3,
+};
+
+static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = OMAP44XX_IRQ_SYS_1N,
+		.platform_data = &omap4_panda_twldata,
+	},
+};
+static int __init omap4_panda_i2c_init(void)
+{
+	/*
+	 * Phoenix Audio IC needs I2C1 to
+	 * start with 400 KHz or less
+	 */
+	omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo,
+			ARRAY_SIZE(omap4_panda_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(4, 400, NULL, 0);
+	return 0;
+}
+static void __init omap4_panda_init(void)
+{
+	omap4_panda_i2c_init();
+	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
+	omap_serial_init();
+	omap4_twl6030_hsmmc_init(mmc);
+	/* OMAP4 Panda uses internal transceiver so register nop transceiver */
+	usb_nop_xceiv_register();
+	omap4_ehci_init();
+	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
+	if (!cpu_is_omap44xx())
+		usb_musb_init(&musb_board_data);
+}
+
+static void __init omap4_panda_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap44xx_map_common_io();
+}
+
+MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
+	/* Maintainer: David Anders - Texas Instruments Inc */
+	.boot_params	= 0x80000100,
+	.map_io		= omap4_panda_map_io,
+	.init_irq	= omap4_panda_init_irq,
+	.init_machine	= omap4_panda_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 79ac41400c21..7053bc0b46db 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -32,6 +32,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mmc/host.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -58,8 +59,6 @@
 #define OVERO_GPIO_USBH_NRESET	183
 
 #define NAND_BLOCK_SIZE SZ_128K
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
 
 #define OVERO_SMSC911X_CS      5
 #define OVERO_SMSC911X_GPIO    176
@@ -166,9 +165,26 @@ static struct platform_device overo_smsc911x_device = {
 	},
 };
 
+static struct platform_device overo_smsc911x2_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(overo_smsc911x2_resources),
+	.resource	= overo_smsc911x2_resources,
+	.dev		= {
+		.platform_data = &overo_smsc911x_config,
+	},
+};
+
+static struct platform_device *smsc911x_devices[] = {
+	&overo_smsc911x_device,
+	&overo_smsc911x2_device,
+};
+
 static inline void __init overo_init_smsc911x(void)
 {
-	unsigned long cs_mem_base;
+	unsigned long cs_mem_base, cs_mem_base2;
+
+	/* set up first smsc911x chip */
 
 	if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n");
@@ -189,7 +205,28 @@ static inline void __init overo_init_smsc911x(void)
 	overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO);
 	overo_smsc911x_resources[1].end	  = 0;
 
-	platform_device_register(&overo_smsc911x_device);
+	/* set up second smsc911x chip */
+
+	if (gpmc_cs_request(OVERO_SMSC911X2_CS, SZ_16M, &cs_mem_base2) < 0) {
+		printk(KERN_ERR "Failed request for GPMC mem for smsc911x2\n");
+		return;
+	}
+
+	overo_smsc911x2_resources[0].start = cs_mem_base2 + 0x0;
+	overo_smsc911x2_resources[0].end   = cs_mem_base2 + 0xff;
+
+	if ((gpio_request(OVERO_SMSC911X2_GPIO, "SMSC911X2 IRQ") == 0) &&
+	    (gpio_direction_input(OVERO_SMSC911X2_GPIO) == 0)) {
+		gpio_export(OVERO_SMSC911X2_GPIO, 0);
+	} else {
+		printk(KERN_ERR "could not obtain gpio for SMSC911X2 IRQ\n");
+		return;
+	}
+
+	overo_smsc911x2_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X2_GPIO);
+	overo_smsc911x2_resources[1].end   = 0;
+
+	platform_add_devices(smsc911x_devices, ARRAY_SIZE(smsc911x_devices));
 }
 
 #else
@@ -231,28 +268,11 @@ static struct omap_nand_platform_data overo_nand_data = {
 	.dma_channel = -1,	/* disable DMA in OMAP NAND driver */
 };
 
-static struct resource overo_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device overo_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &overo_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &overo_nand_resource,
-};
-
-
 static void __init overo_flash_init(void)
 {
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -274,12 +294,9 @@ static void __init overo_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		overo_nand_data.cs = nandcs;
-		overo_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&overo_nand_device) < 0)
+		if (gpmc_nand_init(&overo_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -287,13 +304,13 @@ static void __init overo_flash_init(void)
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 	},
 	{
 		.mmc		= 2,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 		.transceiver	= true,
@@ -484,17 +501,10 @@ static void __init overo_init(void)
 					"OVERO_GPIO_USBH_CPEN\n");
 }
 
-static void __init overo_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OVERO, "Gumstix Overo")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= overo_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= overo_init_irq,
 	.init_machine	= overo_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 03483920ed6e..3fec4d62a91a 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -14,7 +14,7 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
-#include <linux/spi/wl12xx.h>
+#include <linux/wl12xx.h>
 #include <linux/i2c.h>
 #include <linux/i2c/twl.h>
 #include <linux/clk.h>
@@ -23,9 +23,9 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/mmc/host.h>
+#include <sound/tlv320aic3x.h>
 
 #include <plat/mcspi.h>
-#include <plat/mux.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/dma.h>
@@ -33,6 +33,13 @@
 #include <plat/onenand.h>
 #include <plat/gpmc-smc91x.h>
 
+#include <mach/board-rx51.h>
+
+#include <sound/tlv320aic3x.h>
+#include <sound/tpa6130a2-plat.h>
+
+#include <../drivers/staging/iio/light/tsl2563.h>
+
 #include "mux.h"
 #include "hsmmc.h"
 
@@ -51,6 +58,12 @@ enum {
 
 static struct wl12xx_platform_data wl1251_pdata;
 
+#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
+static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
+	.cover_comp_gain = 16,
+};
+#endif
+
 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel	= 1,
@@ -94,6 +107,10 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 	},
 };
 
+static struct platform_device rx51_charger_device = {
+	.name = "isp1704_charger",
+};
+
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 
 #define RX51_GPIO_CAMERA_LENS_COVER	110
@@ -174,7 +191,7 @@ static void __init rx51_add_gpio_keys(void)
 }
 #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
 
-static int board_keymap[] = {
+static uint32_t board_keymap[] = {
 	/*
 	 * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
 	 * connected to the ground" matrix state.
@@ -292,7 +309,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "external",
 		.mmc		= 1,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.cover_only	= true,
 		.gpio_cd	= 160,
 		.gpio_wp	= -EINVAL,
@@ -301,7 +318,8 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "internal",
 		.mmc		= 2,
-		.wires		= 8, /* See also rx51_mmc2_remux */
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+						/* See also rx51_mmc2_remux */
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 		.nonremovable	= true,
@@ -311,48 +329,29 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply rx51_vmmc1_supply = {
-	.supply   = "vmmc",
-	.dev_name = "mmci-omap-hs.0",
-};
+static struct regulator_consumer_supply rx51_vmmc1_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
 
-static struct regulator_consumer_supply rx51_vaux3_supply = {
-	.supply   = "vmmc",
-	.dev_name = "mmci-omap-hs.1",
-};
+static struct regulator_consumer_supply rx51_vaux3_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
 
-static struct regulator_consumer_supply rx51_vsim_supply = {
-	.supply   = "vmmc_aux",
-	.dev_name = "mmci-omap-hs.1",
-};
+static struct regulator_consumer_supply rx51_vsim_supply =
+	REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
 
 static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
 	/* tlv320aic3x analog supplies */
-	{
-		.supply		= "AVDD",
-		.dev_name	= "2-0018",
-	},
-	{
-		.supply		= "DRVDD",
-		.dev_name	= "2-0018",
-	},
+	REGULATOR_SUPPLY("AVDD", "2-0018"),
+	REGULATOR_SUPPLY("DRVDD", "2-0018"),
+	/* tpa6130a2 */
+	REGULATOR_SUPPLY("Vdd", "2-0060"),
 	/* Keep vmmc as last item. It is not iterated for newer boards */
-	{
-		.supply		= "vmmc",
-		.dev_name	= "mmci-omap-hs.1",
-	},
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
 };
 
 static struct regulator_consumer_supply rx51_vio_supplies[] = {
 	/* tlv320aic3x digital supplies */
-	{
-		.supply		= "IOVDD",
-		.dev_name	= "2-0018"
-	},
-	{
-		.supply		= "DVDD",
-		.dev_name	= "2-0018"
-	},
+	REGULATOR_SUPPLY("IOVDD", "2-0018"),
+	REGULATOR_SUPPLY("DVDD", "2-0018"),
 };
 
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
@@ -373,6 +372,7 @@ static struct regulator_init_data rx51_vaux1 = {
 		.name			= "V28",
 		.min_uV			= 2800000,
 		.max_uV			= 2800000,
+		.always_on		= true, /* due battery cover sensor */
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
@@ -697,7 +697,6 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = {
 };
 
 
-
 static struct twl4030_platform_data rx51_twldata __initdata = {
 	.irq_base		= TWL4030_IRQ_BASE,
 	.irq_end		= TWL4030_IRQ_END,
@@ -718,6 +717,11 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vio			= &rx51_vio,
 };
 
+static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata = {
+	.id			= TPA6130A2,
+	.power_gpio		= 98,
+};
+
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 	{
 		I2C_BOARD_INFO("twl5030", 0x48),
@@ -727,10 +731,32 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 	},
 };
 
+/* Audio setup data */
+static struct aic3x_setup_data rx51_aic34_setup = {
+	.gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
+	.gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT,
+};
+
+static struct aic3x_pdata rx51_aic3x_data = {
+	.setup = &rx51_aic34_setup,
+	.gpio_reset = 60,
+};
+
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+		.platform_data = &rx51_aic3x_data,
+	},
+#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
+	{
+		I2C_BOARD_INFO("tsl2563", 0x29),
+		.platform_data = &rx51_tsl2563_platform_data,
 	},
+#endif
+	{
+		I2C_BOARD_INFO("tpa6130a2", 0x60),
+		.platform_data = &rx51_tpa6130a2_data,
+	}
 };
 
 static int __init rx51_i2c_init(void)
@@ -897,5 +923,6 @@ void __init rx51_peripherals_init(void)
 	spi_register_board_info(rx51_peripherals_spi_board_info,
 				ARRAY_SIZE(rx51_peripherals_spi_board_info));
 	omap2_hsmmc_init(mmc);
+	platform_device_register(&rx51_charger_device);
 }
 
diff --git a/arch/arm/mach-omap2/board-rx51-sdram.c b/arch/arm/mach-omap2/board-rx51-sdram.c
index f392844195d2..a43b2c5c838b 100644
--- a/arch/arm/mach-omap2/board-rx51-sdram.c
+++ b/arch/arm/mach-omap2/board-rx51-sdram.c
@@ -43,7 +43,7 @@ struct sdram_timings {
 	u32 tWTR;
 };
 
-struct omap_sdrc_params rx51_sdrc_params[4];
+static struct omap_sdrc_params rx51_sdrc_params[4];
 
 static const struct sdram_timings rx51_timings[] = {
 	{
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index b743a4f42649..85503fed4e13 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -16,11 +16,12 @@
 #include <linux/mm.h>
 
 #include <asm/mach-types.h>
-#include <plat/mux.h>
 #include <plat/display.h>
 #include <plat/vram.h>
 #include <plat/mcspi.h>
 
+#include <mach/board-rx51.h>
+
 #include "mux.h"
 
 #define RX51_LCD_RESET_GPIO	90
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 1b86b5bb87a2..36f2cf4efd57 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -143,17 +143,16 @@ static void __init rx51_init(void)
 
 static void __init rx51_map_io(void)
 {
-	omap2_set_globals_343x();
+	omap2_set_globals_3xxx();
 	rx51_video_mem_init();
 	omap34xx_map_common_io();
 }
 
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= rx51_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= rx51_init_irq,
 	.init_machine	= rx51_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-sdp-flash.c
deleted file mode 100644
index 2d026328e385..000000000000
--- a/arch/arm/mach-omap2/board-sdp-flash.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * board-sdp-flash.c
- * Modified from mach-omap2/board-3430sdp-flash.c
- *
- * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2009 Texas Instruments
- *
- * Vimal Singh <vimalsingh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <plat/gpmc.h>
-#include <plat/nand.h>
-#include <plat/onenand.h>
-#include <plat/tc.h>
-#include <mach/board-sdp.h>
-
-#define REG_FPGA_REV			0x10
-#define REG_FPGA_DIP_SWITCH_INPUT2	0x60
-#define MAX_SUPPORTED_GPMC_CONFIG	3
-
-#define DEBUG_BASE		0x08000000 /* debug board */
-
-#define PDC_NOR		1
-#define PDC_NAND	2
-#define PDC_ONENAND	3
-#define DBG_MPDB	4
-
-/* various memory sizes */
-#define FLASH_SIZE_SDPV1	SZ_64M	/* NOR flash (64 Meg aligned) */
-#define FLASH_SIZE_SDPV2	SZ_128M	/* NOR flash (256 Meg aligned) */
-
-/*
- * SDP3430 V2 Board CS organization
- * Different from SDP3430 V1. Now 4 switches used to specify CS
- *
- * See also the Switch S8 settings in the comments.
- *
- * REVISIT: Add support for 2430 SDP
- */
-static const unsigned char chip_sel_sdp[][GPMC_CS_NUM] = {
-	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
-	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
-	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct physmap_flash_data sdp_nor_data = {
-	.width		= 2,
-};
-
-static struct resource sdp_nor_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device sdp_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-			.platform_data = &sdp_nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &sdp_nor_resource,
-};
-
-static void
-__init board_nor_init(struct flash_partitions sdp_nor_parts, u8 cs)
-{
-	int err;
-
-	sdp_nor_data.parts	= sdp_nor_parts.parts;
-	sdp_nor_data.nr_parts	= sdp_nor_parts.nr_parts;
-
-	/* Configure start address and size of NOR device */
-	if (omap_rev() >= OMAP3430_REV_ES1_0) {
-		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
-				(unsigned long *)&sdp_nor_resource.start);
-		sdp_nor_resource.end = sdp_nor_resource.start
-					+ FLASH_SIZE_SDPV2 - 1;
-	} else {
-		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
-				(unsigned long *)&sdp_nor_resource.start);
-		sdp_nor_resource.end = sdp_nor_resource.start
-					+ FLASH_SIZE_SDPV1 - 1;
-	}
-	if (err < 0) {
-		printk(KERN_ERR "NOR: Can't request GPMC CS\n");
-		return;
-	}
-	if (platform_device_register(&sdp_nor_device) < 0)
-		printk(KERN_ERR	"Unable to register NOR device\n");
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-static struct omap_onenand_platform_data board_onenand_data = {
-	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
-};
-
-static void
-__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
-{
-	board_onenand_data.cs		= cs;
-	board_onenand_data.parts	= sdp_onenand_parts.parts;
-	board_onenand_data.nr_parts	= sdp_onenand_parts.nr_parts;
-
-	gpmc_onenand_init(&board_onenand_data);
-}
-#else
-static void
-__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
-{
-}
-#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-
-/* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
-
-	.sync_clk = 0,
-
-	.cs_on = 0,
-	.cs_rd_off = 36,
-	.cs_wr_off = 36,
-
-	.adv_on = 6,
-	.adv_rd_off = 24,
-	.adv_wr_off = 36,
-
-	.we_off = 30,
-	.oe_off = 48,
-
-	.access = 54,
-	.rd_cycle = 72,
-	.wr_cycle = 72,
-
-	.wr_access = 30,
-	.wr_data_mux_bus = 0,
-};
-
-static struct omap_nand_platform_data sdp_nand_data = {
-	.nand_setup	= NULL,
-	.gpmc_t		= &nand_timings,
-	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
-	.dev_ready	= NULL,
-	.devsize	= 0,	/* '0' for 8-bit, '1' for 16-bit device */
-};
-
-static void
-__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
-{
-	sdp_nand_data.cs		= cs;
-	sdp_nand_data.parts		= sdp_nand_parts.parts;
-	sdp_nand_data.nr_parts		= sdp_nand_parts.nr_parts;
-
-	sdp_nand_data.gpmc_cs_baseaddr	= (void *)(OMAP34XX_GPMC_VIRT +
-							GPMC_CS0_BASE +
-							cs * GPMC_CS_SIZE);
-	sdp_nand_data.gpmc_baseaddr	 = (void *) (OMAP34XX_GPMC_VIRT);
-
-	gpmc_nand_init(&sdp_nand_data);
-}
-#else
-static void
-__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
-{
-}
-#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
-
-/**
- * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
- * the various cs values.
- */
-static u8 get_gpmc0_type(void)
-{
-	u8 cs = 0;
-	void __iomem *fpga_map_addr;
-
-	fpga_map_addr = ioremap(DEBUG_BASE, 4096);
-	if (!fpga_map_addr)
-		return -ENOMEM;
-
-	if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
-		/* we dont have an DEBUG FPGA??? */
-		/* Depend on #defines!! default to strata boot return param */
-		goto unmap;
-
-	/* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
-	cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
-
-	/* ES2.0 SDP's onwards 4 dip switches are provided for CS */
-	if (omap_rev() >= OMAP3430_REV_ES1_0)
-		/* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
-		cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
-			((cs & 2) << 1) | ((cs & 1) << 3);
-	else
-		/* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
-		cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
-unmap:
-	iounmap(fpga_map_addr);
-	return cs;
-}
-
-/**
- * sdp3430_flash_init - Identify devices connected to GPMC and register.
- *
- * @return - void.
- */
-void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
-{
-	u8		cs = 0;
-	u8		norcs = GPMC_CS_NUM + 1;
-	u8		nandcs = GPMC_CS_NUM + 1;
-	u8		onenandcs = GPMC_CS_NUM + 1;
-	u8		idx;
-	unsigned char	*config_sel = NULL;
-
-	/* REVISIT: Is this return correct idx for 2430 SDP?
-	 * for which cs configuration matches for 2430 SDP?
-	 */
-	idx = get_gpmc0_type();
-	if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
-		printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs);
-		return;
-	}
-	config_sel = (unsigned char *)(chip_sel_sdp[idx]);
-
-	while (cs < GPMC_CS_NUM) {
-		switch (config_sel[cs]) {
-		case PDC_NOR:
-			if (norcs > GPMC_CS_NUM)
-				norcs = cs;
-			break;
-		case PDC_NAND:
-			if (nandcs > GPMC_CS_NUM)
-				nandcs = cs;
-			break;
-		case PDC_ONENAND:
-			if (onenandcs > GPMC_CS_NUM)
-				onenandcs = cs;
-			break;
-		};
-		cs++;
-	}
-
-	if (norcs > GPMC_CS_NUM)
-		printk(KERN_INFO "NOR: Unable to find configuration "
-				"in GPMC\n");
-	else
-		board_nor_init(sdp_partition_info[0], norcs);
-
-	if (onenandcs > GPMC_CS_NUM)
-		printk(KERN_INFO "OneNAND: Unable to find configuration "
-				"in GPMC\n");
-	else
-		board_onenand_init(sdp_partition_info[1], onenandcs);
-
-	if (nandcs > GPMC_CS_NUM)
-		printk(KERN_INFO "NAND: Unable to find configuration "
-				"in GPMC\n");
-	else
-		board_nand_init(sdp_partition_info[2], nandcs);
-}
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 1d7f827b0408..007ebdc6c993 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -16,6 +16,8 @@
 
 #include <plat/gpmc.h>
 
+#include <mach/board-zoom.h>
+
 #define ZOOM_SMSC911X_CS	7
 #define ZOOM_SMSC911X_GPIO	158
 #define ZOOM_QUADUART_CS	3
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 6b3984964cc5..86c9b2102952 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -16,6 +16,9 @@
 #include <linux/gpio.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/wl12xx.h>
+#include <linux/mmc/host.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -24,11 +27,16 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 
+#include <mach/board-zoom.h>
+
 #include "mux.h"
 #include "hsmmc.h"
 
+#define OMAP_ZOOM_WLAN_PMENA_GPIO	(101)
+#define OMAP_ZOOM_WLAN_IRQ_GPIO		(162)
+
 /* Zoom2 has Qwerty keyboard*/
-static int board_keymap[] = {
+static uint32_t board_keymap[] = {
 	KEY(0, 0, KEY_E),
 	KEY(0, 1, KEY_R),
 	KEY(0, 2, KEY_T),
@@ -106,6 +114,11 @@ static struct regulator_consumer_supply zoom_vmmc2_supply = {
 	.supply		= "vmmc",
 };
 
+static struct regulator_consumer_supply zoom_vmmc3_supply = {
+	.supply		= "vmmc",
+	.dev_name	= "mmci-omap-hs.2",
+};
+
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data zoom_vmmc1 = {
 	.constraints = {
@@ -151,23 +164,63 @@ static struct regulator_init_data zoom_vsim = {
 	.consumer_supplies      = &zoom_vsim_supply,
 };
 
+static struct regulator_init_data zoom_vmmc3 = {
+	.constraints = {
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies = &zoom_vmmc3_supply,
+};
+
+static struct fixed_voltage_config zoom_vwlan = {
+	.supply_name		= "vwl1271",
+	.microvolts		= 1800000, /* 1.8V */
+	.gpio			= OMAP_ZOOM_WLAN_PMENA_GPIO,
+	.startup_delay		= 70000, /* 70msec */
+	.enable_high		= 1,
+	.enabled_at_boot	= 0,
+	.init_data		= &zoom_vmmc3,
+};
+
+static struct platform_device omap_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &zoom_vwlan,
+	},
+};
+
+struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
+	.irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO),
+	/* ZOOM ref clock is 26 MHz */
+	.board_ref_clock = 1,
+};
+
 static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "external",
 		.mmc		= 1,
-		.wires		= 4,
+		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_wp	= -EINVAL,
 		.power_saving	= true,
 	},
 	{
 		.name		= "internal",
 		.mmc		= 2,
-		.wires		= 8,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 		.nonremovable	= true,
 		.power_saving	= true,
 	},
+	{
+		.name		= "wl1271",
+		.mmc		= 3,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_wp	= -EINVAL,
+		.gpio_cd	= -EINVAL,
+		.nonremovable	= true,
+	},
 	{}      /* Terminator */
 };
 
@@ -188,6 +241,11 @@ static int zoom_twl_gpio_setup(struct device *dev,
 	return 0;
 }
 
+/* EXTMUTE callback function */
+void zoom2_set_hs_extmute(int mute)
+{
+	gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
+}
 
 static int zoom_batt_table[] = {
 /* 0 C*/
@@ -257,6 +315,11 @@ static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
 
 static int __init omap_i2c_init(void)
 {
+	if (machine_is_omap_zoom2()) {
+		zoom_audio_data.ramp_delay_value = 3;	/* 161 ms */
+		zoom_audio_data.hs_extmute = 1;
+		zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
+	}
 	omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo,
 			ARRAY_SIZE(zoom_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
@@ -279,7 +342,12 @@ static void enable_board_wakeup_source(void)
 
 void __init zoom_peripherals_init(void)
 {
+	if (wl12xx_set_platform_data(&omap_zoom_wlan_data))
+		pr_err("error setting wl12xx data\n");
+
 	omap_i2c_init();
+	platform_device_register(&omap_vwlan_device);
 	usb_musb_init(&musb_board_data);
 	enable_board_wakeup_source();
+	omap_serial_init();
 }
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 803ef14cbf2d..2992a9f3a585 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/i2c/twl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -23,6 +24,7 @@
 
 #include <mach/board-zoom.h>
 
+#include "board-flash.h"
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 
@@ -34,67 +36,81 @@ static void __init omap_zoom2_init_irq(void)
 	omap_gpio_init();
 }
 
-/* REVISIT: These audio entries can be removed once MFD code is merged */
-#if 0
-
-static struct twl4030_madc_platform_data zoom2_madc_data = {
-	.irq_line	= 1,
-};
-
-static struct twl4030_codec_audio_data zoom2_audio_data = {
-	.audio_mclk = 26000000,
-};
-
-static struct twl4030_codec_data zoom2_codec_data = {
-	.audio_mclk = 26000000,
-	.audio = &zoom2_audio_data,
-};
-
-static struct twl4030_platform_data zoom2_twldata = {
-	.irq_base	= TWL4030_IRQ_BASE,
-	.irq_end	= TWL4030_IRQ_END,
-
-	/* platform_data for children goes here */
-	.bci		= &zoom2_bci_data,
-	.madc		= &zoom2_madc_data,
-	.usb		= &zoom2_usb_data,
-	.gpio		= &zoom2_gpio_data,
-	.keypad		= &zoom2_kp_twl4030_data,
-	.codec		= &zoom2_codec_data,
-	.vmmc1          = &zoom2_vmmc1,
-	.vmmc2          = &zoom2_vmmc2,
-	.vsim           = &zoom2_vsim,
-
-};
-
-#endif
-
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 162 */
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN POWER ENABLE - GPIO 101 */
+	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC3 CMD */
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 CLK */
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 DAT[0-3] */
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
 #define board_mux	NULL
 #endif
 
+static struct mtd_partition zoom_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "system",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
+	},
+	{
+		.name		= "userdata",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+	{
+		.name		= "cache",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+};
+
 static void __init omap_zoom2_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	zoom_peripherals_init();
+	board_nand_init(zoom_nand_partitions,
+			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
 	zoom_debugboard_init();
 }
 
-static void __init omap_zoom2_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.phys_io	= ZOOM_UART_BASE,
-	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_zoom2_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom2_init_irq,
 	.init_machine	= omap_zoom2_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index 33147042485f..5adde12c0395 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -22,18 +22,54 @@
 #include <plat/board.h>
 #include <plat/usb.h>
 
+#include "board-flash.h"
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 
-static void __init omap_zoom_map_io(void)
-{
-	omap2_set_globals_36xx();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_config_kernel zoom_config[] __initdata = {
 };
 
+static struct mtd_partition zoom_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "system",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
+	},
+	{
+		.name		= "userdata",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+	{
+		.name		= "cache",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+};
+
 static void __init omap_zoom_init_irq(void)
 {
 	omap_board_config = zoom_config;
@@ -46,6 +82,19 @@ static void __init omap_zoom_init_irq(void)
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 162 */
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN POWER ENABLE - GPIO 101 */
+	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC3 CMD */
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 CLK */
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 DAT[0-3] */
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
@@ -66,6 +115,8 @@ static void __init omap_zoom_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	zoom_peripherals_init();
+	board_nand_init(zoom_nand_partitions,
+			 ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
 	zoom_debugboard_init();
 
 	omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
@@ -73,10 +124,9 @@ static void __init omap_zoom_init(void)
 }
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-	.phys_io	= ZOOM_UART_BASE,
-	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_zoom_map_io,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap_timer,
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 605f531783a8..b5babf5440e4 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -395,7 +395,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 	if ((regval32 & (1 << clk->enable_bit)) == v)
 		return;
 
-	printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
+	pr_debug("Disabling unused clock \"%s\"\n", clk->name);
 	if (cpu_is_omap34xx()) {
 		omap2_clk_enable(clk);
 		omap2_clk_disable(clk);
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 37d65d62ed8f..21f856252ad8 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -27,6 +27,7 @@
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
+#include "control.h"
 
 #define OMAP_CM_REGADDR                 OMAP2420_CM_REGADDR
 
@@ -89,6 +90,12 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.clkdm_name	= "wkup_clkdm",
 };
 
+/* Optional external clock input for McBSP CLKS */
+static struct clk mcbsp_clks = {
+	.name		= "mcbsp_clks",
+	.ops		= &clkops_null,
+};
+
 /*
  * Analog domain root source clocks
  */
@@ -1135,14 +1142,34 @@ static struct clk mcbsp1_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static const struct clksel_rate common_mcbsp_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel mcbsp_fck_clksel[] = {
+	{ .parent = &func_96m_ck,  .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
 static struct clk mcbsp1_fck = {
 	.name		= "mcbsp1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP242X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp2_ick = {
@@ -1159,10 +1186,14 @@ static struct clk mcbsp2_fck = {
 	.name		= "mcbsp2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP242X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcspi1_ick = {
@@ -1721,6 +1752,9 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"osc_ck",	&osc_ck,	CK_242X),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_242X),
 	CLK(NULL,	"alt_ck",	&alt_ck,	CK_242X),
+	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_242X),
+	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_242X),
+	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_242X),
 	/* internal analog sources */
 	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_242X),
 	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_242X),
@@ -1728,6 +1762,8 @@ static struct omap_clk omap2420_clks[] = {
 	/* internal prcm root sources */
 	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_242X),
 	CLK(NULL,	"core_ck",	&core_ck,	CK_242X),
+	CLK("omap-mcbsp.1",	"prcm_fck",	&func_96m_ck,	CK_242X),
+	CLK("omap-mcbsp.2",	"prcm_fck",	&func_96m_ck,	CK_242X),
 	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_242X),
 	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_242X),
 	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_242X),
@@ -1838,7 +1874,7 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"des_ick",	&des_ick,	CK_242X),
 	CLK("omap-sham",	"ick",	&sha_ick,	CK_242X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_242X),
-	CLK(NULL,	"aes_ick",	&aes_ick,	CK_242X),
+	CLK("omap-aes",	"ick",	&aes_ick,	CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
 	CLK("musb_hdrc",	"fck",	&osc_ck,	CK_242X),
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index b33118fb6a87..e32afcbdfb88 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -27,6 +27,7 @@
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
+#include "control.h"
 
 #define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
 
@@ -89,6 +90,12 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.clkdm_name	= "wkup_clkdm",
 };
 
+/* Optional external clock input for McBSP CLKS */
+static struct clk mcbsp_clks = {
+	.name		= "mcbsp_clks",
+	.ops		= &clkops_null,
+};
+
 /*
  * Analog domain root source clocks
  */
@@ -1123,14 +1130,34 @@ static struct clk mcbsp1_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static const struct clksel_rate common_mcbsp_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel mcbsp_fck_clksel[] = {
+	{ .parent = &func_96m_ck,  .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
 static struct clk mcbsp1_fck = {
 	.name		= "mcbsp1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp2_ick = {
@@ -1147,10 +1174,14 @@ static struct clk mcbsp2_fck = {
 	.name		= "mcbsp2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp3_ick = {
@@ -1167,10 +1198,14 @@ static struct clk mcbsp3_fck = {
 	.name		= "mcbsp3_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp4_ick = {
@@ -1187,10 +1222,14 @@ static struct clk mcbsp4_fck = {
 	.name		= "mcbsp4_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp5_ick = {
@@ -1207,10 +1246,14 @@ static struct clk mcbsp5_fck = {
 	.name		= "mcbsp5_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcspi1_ick = {
@@ -1808,6 +1851,12 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X),
 	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_243X),
+	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_243X),
+	CLK("omap-mcbsp.3",	"pad_fck",	&mcbsp_clks,	CK_243X),
+	CLK("omap-mcbsp.4",	"pad_fck",	&mcbsp_clks,	CK_243X),
+	CLK("omap-mcbsp.5",	"pad_fck",	&mcbsp_clks,	CK_243X),
+	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_243X),
 	/* internal analog sources */
 	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X),
 	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_243X),
@@ -1815,6 +1864,11 @@ static struct omap_clk omap2430_clks[] = {
 	/* internal prcm root sources */
 	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X),
 	CLK(NULL,	"core_ck",	&core_ck,	CK_243X),
+	CLK("omap-mcbsp.1",	"prcm_fck",	&func_96m_ck,	CK_243X),
+	CLK("omap-mcbsp.2",	"prcm_fck",	&func_96m_ck,	CK_243X),
+	CLK("omap-mcbsp.3",	"prcm_fck",	&func_96m_ck,	CK_243X),
+	CLK("omap-mcbsp.4",	"prcm_fck",	&func_96m_ck,	CK_243X),
+	CLK("omap-mcbsp.5",	"prcm_fck",	&func_96m_ck,	CK_243X),
 	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X),
 	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X),
 	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X),
@@ -1926,7 +1980,7 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"des_ick",	&des_ick,	CK_243X),
 	CLK("omap-sham",	"ick",	&sha_ick,	CK_243X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X),
-	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X),
+	CLK("omap-aes",	"ick",	&aes_ick,	CK_243X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X),
 	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 41b155acfca7..d85ecd5aebfd 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -20,7 +20,6 @@
 #include <linux/clk.h>
 #include <linux/list.h>
 
-#include <plat/control.h>
 #include <plat/clkdev_omap.h>
 
 #include "clock.h"
@@ -33,6 +32,7 @@
 #include "cm-regbits-34xx.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"
+#include "control.h"
 
 /*
  * clocks
@@ -1408,7 +1408,7 @@ static struct clk ts_fck = {
 
 static struct clk usbtll_fck = {
 	.name		= "usbtll_fck",
-	.ops		= &clkops_omap2_dflt,
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll5_m2_ck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
@@ -2465,6 +2465,16 @@ static struct clk uart3_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk uart4_fck = {
+	.name		= "uart4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3630_EN_UART4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk gpt2_fck = {
 	.name		= "gpt2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
@@ -2715,6 +2725,16 @@ static struct clk uart3_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk uart4_ick = {
+	.name		= "uart4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3630_EN_UART4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk gpt9_ick = {
 	.name		= "gpt9_ick",
 	.ops		= &clkops_omap2_dflt_wait,
@@ -3166,6 +3186,10 @@ static struct clk uart4_ick_am35xx = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name		= "apb_pclk",
+	.ops		= &clkops_null,
+};
 
 /*
  * clkdev
@@ -3173,6 +3197,7 @@ static struct clk uart4_ick_am35xx = {
 
 /* XXX At some point we should rename this file to clock3xxx_data.c */
 static struct omap_clk omap3xxx_clks[] = {
+	CLK(NULL,	"apb_pclk",	&dummy_apb_pclk,	CK_3XXX),
 	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_3XXX),
 	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_3XXX),
 	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_3XXX),
@@ -3183,6 +3208,11 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_3XXX),
+	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
+	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
+	CLK("omap-mcbsp.3",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
+	CLK("omap-mcbsp.4",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
+	CLK("omap-mcbsp.5",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
 	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_3XXX),
 	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_3XXX),
 	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_3XXX),
@@ -3248,6 +3278,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2 | CK_AM35XX),
+	CLK("omap-mcbsp.1",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
+	CLK("omap-mcbsp.5",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
 	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2 | CK_AM35XX),
 	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_3XXX),
@@ -3283,7 +3315,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2 | CK_AM35XX),
 	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
-	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
+	CLK("omap-aes",	"ick",	&aes2_ick,	CK_343X),
 	CLK("omap-sham",	"ick",	&sha12_ick,	CK_343X),
 	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
 	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_3XXX),
@@ -3341,9 +3373,13 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_3XXX),
 	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_3XXX),
+	CLK("omap-mcbsp.2",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
+	CLK("omap-mcbsp.3",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
+	CLK("omap-mcbsp.4",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
 	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_3XXX),
 	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_3XXX),
 	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_3XXX),
+	CLK(NULL,	"uart4_fck",	&uart4_fck,	CK_36XX),
 	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_3XXX),
 	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_3XXX),
 	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_3XXX),
@@ -3367,6 +3403,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_3XXX),
 	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_3XXX),
 	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_3XXX),
+	CLK(NULL,	"uart4_ick",	&uart4_ick,	CK_36XX),
 	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_3XXX),
 	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_3XXX),
 	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_3XXX),
@@ -3412,7 +3449,13 @@ int __init omap3xxx_clk_init(void)
 	struct omap_clk *c;
 	u32 cpu_clkflg = CK_3XXX;
 
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap3517()) {
+		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+		cpu_clkflg |= CK_3517;
+	} else if (cpu_is_omap3505()) {
+		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+		cpu_clkflg |= CK_3505;
+	} else if (cpu_is_omap34xx()) {
 		cpu_mask = RATE_IN_3XXX;
 		cpu_clkflg |= CK_343X;
 
@@ -3427,12 +3470,6 @@ int __init omap3xxx_clk_init(void)
 			cpu_mask |= RATE_IN_3430ES2PLUS;
 			cpu_clkflg |= CK_3430ES2;
 		}
-	} else if (cpu_is_omap3517()) {
-		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
-		cpu_clkflg |= CK_3517;
-	} else if (cpu_is_omap3505()) {
-		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
-		cpu_clkflg |= CK_3505;
 	}
 
 	if (omap3_has_192mhz_clk())
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index e10db7a90cb2..1599836ba3d9 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -17,13 +17,15 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * XXX Some of the ES1 clocks have been removed/changed; once support
+ * is added for discriminating clocks by ES level, these should be added back
+ * in.
  */
 
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/clk.h>
-
-#include <plat/control.h>
 #include <plat/clkdev_omap.h>
 
 #include "clock.h"
@@ -32,6 +34,7 @@
 #include "cm-regbits-44xx.h"
 #include "prm.h"
 #include "prm-regbits-44xx.h"
+#include "control.h"
 
 /* Root clocks */
 
@@ -175,21 +178,27 @@ static struct clk sys_clkin_ck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
+static struct clk tie_low_clock_ck = {
+	.name		= "tie_low_clock_ck",
+	.rate		= 0,
+	.ops		= &clkops_null,
+};
+
 static struct clk utmi_phy_clkout_ck = {
 	.name		= "utmi_phy_clkout_ck",
-	.rate		= 12000000,
+	.rate		= 60000000,
 	.ops		= &clkops_null,
 };
 
 static struct clk xclk60mhsp1_ck = {
 	.name		= "xclk60mhsp1_ck",
-	.rate		= 12000000,
+	.rate		= 60000000,
 	.ops		= &clkops_null,
 };
 
 static struct clk xclk60mhsp2_ck = {
 	.name		= "xclk60mhsp2_ck",
-	.rate		= 12000000,
+	.rate		= 60000000,
 	.ops		= &clkops_null,
 };
 
@@ -201,39 +210,23 @@ static struct clk xclk60motg_ck = {
 
 /* Module clocks and DPLL outputs */
 
-static const struct clksel_rate div2_1to2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel dpll_sys_ref_clk_div[] = {
-	{ .parent = &sys_clkin_ck, .rates = div2_1to2_rates },
+static const struct clksel abe_dpll_bypass_clk_mux_sel[] = {
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
+	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
 	{ .parent = NULL },
 };
 
-static struct clk dpll_sys_ref_clk = {
-	.name		= "dpll_sys_ref_clk",
+static struct clk abe_dpll_bypass_clk_mux_ck = {
+	.name		= "abe_dpll_bypass_clk_mux_ck",
 	.parent		= &sys_clkin_ck,
-	.clksel		= dpll_sys_ref_clk_div,
-	.clksel_reg	= OMAP4430_CM_DPLL_SYS_REF_CLKSEL,
-	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
 	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel abe_dpll_refclk_mux_sel[] = {
-	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
-	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk abe_dpll_refclk_mux_ck = {
 	.name		= "abe_dpll_refclk_mux_ck",
-	.parent		= &dpll_sys_ref_clk,
-	.clksel		= abe_dpll_refclk_mux_sel,
+	.parent		= &sys_clkin_ck,
+	.clksel		= abe_dpll_bypass_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP4430_CM_ABE_PLL_REF_CLKSEL,
 	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
@@ -244,7 +237,7 @@ static struct clk abe_dpll_refclk_mux_ck = {
 /* DPLL_ABE */
 static struct dpll_data dpll_abe_dd = {
 	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_ABE,
-	.clk_bypass	= &sys_clkin_ck,
+	.clk_bypass	= &abe_dpll_bypass_clk_mux_ck,
 	.clk_ref	= &abe_dpll_refclk_mux_ck,
 	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_ABE,
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
@@ -310,6 +303,12 @@ static struct clk abe_clk = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
+static const struct clksel_rate div2_1to2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
 static const struct clksel aess_fclk_div[] = {
 	{ .parent = &abe_clk, .rates = div2_1to2_rates },
 	{ .parent = NULL },
@@ -380,14 +379,14 @@ static struct clk dpll_abe_m3_ck = {
 };
 
 static const struct clksel core_hsd_byp_clk_mux_sel[] = {
-	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
 	{ .parent = &dpll_abe_m3_ck, .rates = div_1_1_rates },
 	{ .parent = NULL },
 };
 
 static struct clk core_hsd_byp_clk_mux_ck = {
 	.name		= "core_hsd_byp_clk_mux_ck",
-	.parent		= &dpll_sys_ref_clk,
+	.parent		= &sys_clkin_ck,
 	.clksel		= core_hsd_byp_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP4430_CM_CLKSEL_DPLL_CORE,
@@ -400,7 +399,7 @@ static struct clk core_hsd_byp_clk_mux_ck = {
 static struct dpll_data dpll_core_dd = {
 	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_CORE,
 	.clk_bypass	= &core_hsd_byp_clk_mux_ck,
-	.clk_ref	= &dpll_sys_ref_clk,
+	.clk_ref	= &sys_clkin_ck,
 	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_CORE,
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_CORE,
@@ -418,7 +417,7 @@ static struct dpll_data dpll_core_dd = {
 
 static struct clk dpll_core_ck = {
 	.name		= "dpll_core_ck",
-	.parent		= &dpll_sys_ref_clk,
+	.parent		= &sys_clkin_ck,
 	.dpll_data	= &dpll_core_dd,
 	.init		= &omap2_init_dpll_parent,
 	.ops		= &clkops_null,
@@ -596,14 +595,14 @@ static struct clk dpll_core_m7_ck = {
 };
 
 static const struct clksel iva_hsd_byp_clk_mux_sel[] = {
-	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
 	{ .parent = &div_iva_hs_clk, .rates = div_1_1_rates },
 	{ .parent = NULL },
 };
 
 static struct clk iva_hsd_byp_clk_mux_ck = {
 	.name		= "iva_hsd_byp_clk_mux_ck",
-	.parent		= &dpll_sys_ref_clk,
+	.parent		= &sys_clkin_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
 };
@@ -612,7 +611,7 @@ static struct clk iva_hsd_byp_clk_mux_ck = {
 static struct dpll_data dpll_iva_dd = {
 	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_IVA,
 	.clk_bypass	= &iva_hsd_byp_clk_mux_ck,
-	.clk_ref	= &dpll_sys_ref_clk,
+	.clk_ref	= &sys_clkin_ck,
 	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_IVA,
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_IVA,
@@ -630,7 +629,7 @@ static struct dpll_data dpll_iva_dd = {
 
 static struct clk dpll_iva_ck = {
 	.name		= "dpll_iva_ck",
-	.parent		= &dpll_sys_ref_clk,
+	.parent		= &sys_clkin_ck,
 	.dpll_data	= &dpll_iva_dd,
 	.init		= &omap2_init_dpll_parent,
 	.ops		= &clkops_omap3_noncore_dpll_ops,
@@ -672,7 +671,7 @@ static struct clk dpll_iva_m5_ck = {
 static struct dpll_data dpll_mpu_dd = {
 	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_MPU,
 	.clk_bypass	= &div_mpu_hs_clk,
-	.clk_ref	= &dpll_sys_ref_clk,
+	.clk_ref	= &sys_clkin_ck,
 	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_MPU,
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_MPU,
@@ -690,7 +689,7 @@ static struct dpll_data dpll_mpu_dd = {
 
 static struct clk dpll_mpu_ck = {
 	.name		= "dpll_mpu_ck",
-	.parent		= &dpll_sys_ref_clk,
+	.parent		= &sys_clkin_ck,
 	.dpll_data	= &dpll_mpu_dd,
 	.init		= &omap2_init_dpll_parent,
 	.ops		= &clkops_omap3_noncore_dpll_ops,
@@ -724,14 +723,14 @@ static struct clk per_hs_clk_div_ck = {
 };
 
 static const struct clksel per_hsd_byp_clk_mux_sel[] = {
-	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
 	{ .parent = &per_hs_clk_div_ck, .rates = div_1_1_rates },
 	{ .parent = NULL },
 };
 
 static struct clk per_hsd_byp_clk_mux_ck = {
 	.name		= "per_hsd_byp_clk_mux_ck",
-	.parent		= &dpll_sys_ref_clk,
+	.parent		= &sys_clkin_ck,
 	.clksel		= per_hsd_byp_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP4430_CM_CLKSEL_DPLL_PER,
@@ -744,7 +743,7 @@ static struct clk per_hsd_byp_clk_mux_ck = {
 static struct dpll_data dpll_per_dd = {
 	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_PER,
 	.clk_bypass	= &per_hsd_byp_clk_mux_ck,
-	.clk_ref	= &dpll_sys_ref_clk,
+	.clk_ref	= &sys_clkin_ck,
 	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_PER,
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_PER,
@@ -762,7 +761,7 @@ static struct dpll_data dpll_per_dd = {
 
 static struct clk dpll_per_ck = {
 	.name		= "dpll_per_ck",
-	.parent		= &dpll_sys_ref_clk,
+	.parent		= &sys_clkin_ck,
 	.dpll_data	= &dpll_per_dd,
 	.init		= &omap2_init_dpll_parent,
 	.ops		= &clkops_omap3_noncore_dpll_ops,
@@ -858,8 +857,8 @@ static struct clk dpll_per_m7_ck = {
 /* DPLL_UNIPRO */
 static struct dpll_data dpll_unipro_dd = {
 	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_UNIPRO,
-	.clk_bypass	= &dpll_sys_ref_clk,
-	.clk_ref	= &dpll_sys_ref_clk,
+	.clk_bypass	= &sys_clkin_ck,
+	.clk_ref	= &sys_clkin_ck,
 	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_UNIPRO,
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO,
@@ -877,7 +876,7 @@ static struct dpll_data dpll_unipro_dd = {
 
 static struct clk dpll_unipro_ck = {
 	.name		= "dpll_unipro_ck",
-	.parent		= &dpll_sys_ref_clk,
+	.parent		= &sys_clkin_ck,
 	.dpll_data	= &dpll_unipro_dd,
 	.init		= &omap2_init_dpll_parent,
 	.ops		= &clkops_omap3_noncore_dpll_ops,
@@ -914,7 +913,8 @@ static struct clk usb_hs_clk_div_ck = {
 static struct dpll_data dpll_usb_dd = {
 	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_USB,
 	.clk_bypass	= &usb_hs_clk_div_ck,
-	.clk_ref	= &dpll_sys_ref_clk,
+	.flags		= DPLL_J_TYPE | DPLL_NO_DCO_SEL,
+	.clk_ref	= &sys_clkin_ck,
 	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_USB,
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
 	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_USB,
@@ -927,13 +927,12 @@ static struct dpll_data dpll_usb_dd = {
 	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
 	.max_divider	= OMAP4430_MAX_DPLL_DIV,
 	.min_divider	= 1,
-	.flags		= DPLL_J_TYPE | DPLL_NO_DCO_SEL
 };
 
 
 static struct clk dpll_usb_ck = {
 	.name		= "dpll_usb_ck",
-	.parent		= &dpll_sys_ref_clk,
+	.parent		= &sys_clkin_ck,
 	.dpll_data	= &dpll_usb_dd,
 	.init		= &omap2_init_dpll_parent,
 	.ops		= &clkops_omap3_noncore_dpll_ops,
@@ -1222,7 +1221,7 @@ static struct clk per_abe_24m_fclk = {
 static const struct clksel pmd_stm_clock_mux_sel[] = {
 	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
 	{ .parent = &dpll_core_m6_ck, .rates = div_1_1_rates },
-	{ .parent = &dpll_per_m7_ck, .rates = div_1_2_rates },
+	{ .parent = &tie_low_clock_ck, .rates = div_1_2_rates },
 	{ .parent = NULL },
 };
 
@@ -1240,10 +1239,15 @@ static struct clk pmd_trace_clk_mux_ck = {
 	.recalc		= &followparent_recalc,
 };
 
+static const struct clksel syc_clk_div_div[] = {
+	{ .parent = &sys_clkin_ck, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
 static struct clk syc_clk_div_ck = {
 	.name		= "syc_clk_div_ck",
 	.parent		= &sys_clkin_ck,
-	.clksel		= dpll_sys_ref_clk_div,
+	.clksel		= syc_clk_div_div,
 	.clksel_reg	= OMAP4430_CM_ABE_DSS_SYS_CLKSEL,
 	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
 	.ops		= &clkops_null,
@@ -1284,13 +1288,13 @@ static struct clk aess_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk cust_efuse_fck = {
-	.name		= "cust_efuse_fck",
+static struct clk bandgap_fclk = {
+	.name		= "bandgap_fclk",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_cefuse_clkdm",
-	.parent		= &sys_clkin_ck,
+	.enable_reg	= OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &sys_32k_ck,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1344,6 +1348,56 @@ static struct clk dmic_fck = {
 	.clkdm_name	= "abe_clkdm",
 };
 
+static struct clk dsp_fck = {
+	.name		= "dsp_fck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_TESLA_TESLA_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "tesla_clkdm",
+	.parent		= &dpll_iva_m4_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_sys_clk = {
+	.name		= "dss_sys_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT,
+	.clkdm_name	= "l3_dss_clkdm",
+	.parent		= &syc_clk_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_tv_clk = {
+	.name		= "dss_tv_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_TV_CLK_SHIFT,
+	.clkdm_name	= "l3_dss_clkdm",
+	.parent		= &extalt_clkin_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_dss_clk = {
+	.name		= "dss_dss_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_DSSCLK_SHIFT,
+	.clkdm_name	= "l3_dss_clkdm",
+	.parent		= &dpll_per_m5_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_48mhz_clk = {
+	.name		= "dss_48mhz_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT,
+	.clkdm_name	= "l3_dss_clkdm",
+	.parent		= &func_48mc_fclk,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk dss_fck = {
 	.name		= "dss_fck",
 	.ops		= &clkops_omap2_dflt,
@@ -1354,18 +1408,18 @@ static struct clk dss_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk ducati_ick = {
-	.name		= "ducati_ick",
+static struct clk efuse_ctrl_cust_fck = {
+	.name		= "efuse_ctrl_cust_fck",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_DUCATI_DUCATI_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "ducati_clkdm",
-	.parent		= &ducati_clk_mux_ck,
+	.enable_reg	= OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_cefuse_clkdm",
+	.parent		= &sys_clkin_ck,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk emif1_ick = {
-	.name		= "emif1_ick",
+static struct clk emif1_fck = {
+	.name		= "emif1_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1375,8 +1429,8 @@ static struct clk emif1_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk emif2_ick = {
-	.name		= "emif2_ick",
+static struct clk emif2_fck = {
+	.name		= "emif2_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1407,42 +1461,24 @@ static struct clk fdif_fck = {
 	.clkdm_name	= "iss_clkdm",
 };
 
-static const struct clksel per_sgx_fclk_div[] = {
-	{ .parent = &dpll_per_m2x2_ck, .rates = div3_1to4_rates },
-	{ .parent = NULL },
-};
-
-static struct clk per_sgx_fclk = {
-	.name		= "per_sgx_fclk",
-	.parent		= &dpll_per_m2x2_ck,
-	.clksel		= per_sgx_fclk_div,
-	.clksel_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_PER_192M_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
-};
-
-static const struct clksel sgx_clk_mux_sel[] = {
-	{ .parent = &dpll_core_m7_ck, .rates = div_1_0_rates },
-	{ .parent = &per_sgx_fclk, .rates = div_1_1_rates },
-	{ .parent = NULL },
+static struct clk fpka_fck = {
+	.name		= "fpka_fck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
 };
 
-/* Merged sgx_clk_mux into gfx */
-static struct clk gfx_fck = {
-	.name		= "gfx_fck",
-	.parent		= &dpll_core_m7_ck,
-	.clksel		= sgx_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_SGX_FCLK_MASK,
+static struct clk gpio1_dbclk = {
+	.name		= "gpio1_dbclk",
 	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l3_gfx_clkdm",
+	.enable_reg	= OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk gpio1_ick = {
@@ -1455,6 +1491,16 @@ static struct clk gpio1_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk gpio2_dbclk = {
+	.name		= "gpio2_dbclk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk gpio2_ick = {
 	.name		= "gpio2_ick",
 	.ops		= &clkops_omap2_dflt,
@@ -1465,6 +1511,16 @@ static struct clk gpio2_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk gpio3_dbclk = {
+	.name		= "gpio3_dbclk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk gpio3_ick = {
 	.name		= "gpio3_ick",
 	.ops		= &clkops_omap2_dflt,
@@ -1475,6 +1531,16 @@ static struct clk gpio3_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk gpio4_dbclk = {
+	.name		= "gpio4_dbclk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk gpio4_ick = {
 	.name		= "gpio4_ick",
 	.ops		= &clkops_omap2_dflt,
@@ -1485,6 +1551,16 @@ static struct clk gpio4_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk gpio5_dbclk = {
+	.name		= "gpio5_dbclk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk gpio5_ick = {
 	.name		= "gpio5_ick",
 	.ops		= &clkops_omap2_dflt,
@@ -1495,6 +1571,16 @@ static struct clk gpio5_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk gpio6_dbclk = {
+	.name		= "gpio6_dbclk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_DBCLK_SHIFT,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk gpio6_ick = {
 	.name		= "gpio6_ick",
 	.ops		= &clkops_omap2_dflt,
@@ -1515,214 +1601,25 @@ static struct clk gpmc_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static const struct clksel dmt1_clk_mux_sel[] = {
-	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
-	{ .parent = NULL },
-};
-
-/*
- * Merged dmt1_clk_mux into gptimer1
- * gptimer1 renamed temporarily into gpt1 to match OMAP3 convention
- */
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= dmt1_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_wkup_clkdm",
-};
-
-/*
- * Merged cm2_dm10_mux into gptimer10
- * gptimer10 renamed temporarily into gpt10 to match OMAP3 convention
- */
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= dmt1_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-/*
- * Merged cm2_dm11_mux into gptimer11
- * gptimer11 renamed temporarily into gpt11 to match OMAP3 convention
- */
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= dmt1_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-/*
- * Merged cm2_dm2_mux into gptimer2
- * gptimer2 renamed temporarily into gpt2 to match OMAP3 convention
- */
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= dmt1_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-/*
- * Merged cm2_dm3_mux into gptimer3
- * gptimer3 renamed temporarily into gpt3 to match OMAP3 convention
- */
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= dmt1_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-/*
- * Merged cm2_dm4_mux into gptimer4
- * gptimer4 renamed temporarily into gpt4 to match OMAP3 convention
- */
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= dmt1_clk_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
-};
-
-static const struct clksel timer5_sync_mux_sel[] = {
-	{ .parent = &syc_clk_div_ck, .rates = div_1_0_rates },
-	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
+static const struct clksel sgx_clk_mux_sel[] = {
+	{ .parent = &dpll_core_m7_ck, .rates = div_1_0_rates },
+	{ .parent = &dpll_per_m7_ck, .rates = div_1_1_rates },
 	{ .parent = NULL },
 };
 
-/*
- * Merged timer5_sync_mux into gptimer5
- * gptimer5 renamed temporarily into gpt5 to match OMAP3 convention
- */
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.parent		= &syc_clk_div_ck,
-	.clksel		= timer5_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-/*
- * Merged timer6_sync_mux into gptimer6
- * gptimer6 renamed temporarily into gpt6 to match OMAP3 convention
- */
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.parent		= &syc_clk_div_ck,
-	.clksel		= timer5_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-/*
- * Merged timer7_sync_mux into gptimer7
- * gptimer7 renamed temporarily into gpt7 to match OMAP3 convention
- */
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.parent		= &syc_clk_div_ck,
-	.clksel		= timer5_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-/*
- * Merged timer8_sync_mux into gptimer8
- * gptimer8 renamed temporarily into gpt8 to match OMAP3 convention
- */
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.parent		= &syc_clk_div_ck,
-	.clksel		= timer5_sync_mux_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
-	.ops		= &clkops_omap2_dflt,
-	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-};
-
-/*
- * Merged cm2_dm9_mux into gptimer9
- * gptimer9 renamed temporarily into gpt9 to match OMAP3 convention
- */
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.parent		= &sys_clkin_ck,
-	.clksel		= dmt1_clk_mux_sel,
+/* Merged sgx_clk_mux into gpu */
+static struct clk gpu_fck = {
+	.name		= "gpu_fck",
+	.parent		= &dpll_core_m7_ck,
+	.clksel		= sgx_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.clksel_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SGX_FCLK_MASK,
 	.ops		= &clkops_omap2_dflt,
 	.recalc		= &omap2_clksel_recalc,
-	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
+	.enable_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_per_clkdm",
+	.clkdm_name	= "l3_gfx_clkdm",
 };
 
 static struct clk hdq1w_fck = {
@@ -1735,11 +1632,16 @@ static struct clk hdq1w_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static const struct clksel hsi_fclk_div[] = {
+	{ .parent = &dpll_per_m2x2_ck, .rates = div3_1to4_rates },
+	{ .parent = NULL },
+};
+
 /* Merged hsi_fclk into hsi */
-static struct clk hsi_ick = {
-	.name		= "hsi_ick",
+static struct clk hsi_fck = {
+	.name		= "hsi_fck",
 	.parent		= &dpll_per_m2x2_ck,
-	.clksel		= per_sgx_fclk_div,
+	.clksel		= hsi_fclk_div,
 	.clksel_reg	= OMAP4430_CM_L3INIT_HSI_CLKCTRL,
 	.clksel_mask	= OMAP4430_CLKSEL_24_25_MASK,
 	.ops		= &clkops_omap2_dflt,
@@ -1791,6 +1693,26 @@ static struct clk i2c4_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk ipu_fck = {
+	.name		= "ipu_fck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_DUCATI_DUCATI_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "ducati_clkdm",
+	.parent		= &ducati_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk iss_ctrlclk = {
+	.name		= "iss_ctrlclk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_CAM_ISS_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT,
+	.clkdm_name	= "iss_clkdm",
+	.parent		= &func_96m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk iss_fck = {
 	.name		= "iss_fck",
 	.ops		= &clkops_omap2_dflt,
@@ -1801,8 +1723,8 @@ static struct clk iss_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk ivahd_ick = {
-	.name		= "ivahd_ick",
+static struct clk iva_fck = {
+	.name		= "iva_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_IVAHD_IVAHD_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1811,8 +1733,8 @@ static struct clk ivahd_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk keyboard_fck = {
-	.name		= "keyboard_fck",
+static struct clk kbd_fck = {
+	.name		= "kbd_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -1821,8 +1743,8 @@ static struct clk keyboard_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk l3_instr_interconnect_ick = {
-	.name		= "l3_instr_interconnect_ick",
+static struct clk l3_instr_ick = {
+	.name		= "l3_instr_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -1831,8 +1753,8 @@ static struct clk l3_instr_interconnect_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk l3_interconnect_3_ick = {
-	.name		= "l3_interconnect_3_ick",
+static struct clk l3_main_3_ick = {
+	.name		= "l3_main_3_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INSTR_L3_3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -2005,6 +1927,16 @@ static struct clk mcbsp4_fck = {
 	.clkdm_name	= "l4_per_clkdm",
 };
 
+static struct clk mcpdm_fck = {
+	.name		= "mcpdm_fck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_PDM_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &pad_clks_ck,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk mcspi1_fck = {
 	.name		= "mcspi1_fck",
 	.ops		= &clkops_omap2_dflt,
@@ -2105,33 +2037,33 @@ static struct clk mmc5_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk ocp_wp1_ick = {
-	.name		= "ocp_wp1_ick",
+static struct clk ocp2scp_usb_phy_phy_48m = {
+	.name		= "ocp2scp_usb_phy_phy_48m",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "l3_instr_clkdm",
-	.parent		= &l3_div_ck,
+	.enable_reg	= OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_PHY_48M_SHIFT,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &func_48m_fclk,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk pdm_fck = {
-	.name		= "pdm_fck",
+static struct clk ocp2scp_usb_phy_ick = {
+	.name		= "ocp2scp_usb_phy_ick",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM1_ABE_PDM_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-	.parent		= &pad_clks_ck,
+	.enable_reg	= OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &l4_div_ck,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk pkaeip29_fck = {
-	.name		= "pkaeip29_fck",
+static struct clk ocp_wp_noc_ick = {
+	.name		= "ocp_wp_noc_ick",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_secure_clkdm",
-	.parent		= &l4_div_ck,
+	.enable_reg	= OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_instr_clkdm",
+	.parent		= &l3_div_ck,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2145,8 +2077,8 @@ static struct clk rng_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk sha2md51_fck = {
-	.name		= "sha2md51_fck",
+static struct clk sha2md5_fck = {
+	.name		= "sha2md5_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2155,8 +2087,8 @@ static struct clk sha2md51_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk sl2_ick = {
-	.name		= "sl2_ick",
+static struct clk sl2if_ick = {
+	.name		= "sl2if_ick",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_IVAHD_SL2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
@@ -2165,6 +2097,46 @@ static struct clk sl2_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk slimbus1_fclk_1 = {
+	.name		= "slimbus1_fclk_1",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_FCLK1_SHIFT,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &func_24m_clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk slimbus1_fclk_0 = {
+	.name		= "slimbus1_fclk_0",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_FCLK0_SHIFT,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &abe_24m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk slimbus1_fclk_2 = {
+	.name		= "slimbus1_fclk_2",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_FCLK2_SHIFT,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &pad_clks_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk slimbus1_slimbus_clk = {
+	.name		= "slimbus1_slimbus_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &slimbus_clk,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk slimbus1_fck = {
 	.name		= "slimbus1_fck",
 	.ops		= &clkops_omap2_dflt,
@@ -2175,6 +2147,36 @@ static struct clk slimbus1_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk slimbus2_fclk_1 = {
+	.name		= "slimbus2_fclk_1",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &per_abe_24m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk slimbus2_fclk_0 = {
+	.name		= "slimbus2_fclk_0",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_24mc_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk slimbus2_slimbus_clk = {
+	.name		= "slimbus2_slimbus_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &pad_slimbus_core_clks_ck,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk slimbus2_fck = {
 	.name		= "slimbus2_fck",
 	.ops		= &clkops_omap2_dflt,
@@ -2185,8 +2187,8 @@ static struct clk slimbus2_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk sr_core_fck = {
-	.name		= "sr_core_fck",
+static struct clk smartreflex_core_fck = {
+	.name		= "smartreflex_core_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2195,8 +2197,8 @@ static struct clk sr_core_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk sr_iva_fck = {
-	.name		= "sr_iva_fck",
+static struct clk smartreflex_iva_fck = {
+	.name		= "smartreflex_iva_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2205,8 +2207,8 @@ static struct clk sr_iva_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk sr_mpu_fck = {
-	.name		= "sr_mpu_fck",
+static struct clk smartreflex_mpu_fck = {
+	.name		= "smartreflex_mpu_fck",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
@@ -2215,14 +2217,175 @@ static struct clk sr_mpu_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk tesla_ick = {
-	.name		= "tesla_ick",
+/* Merged dmt1_clk_mux into timer1 */
+static struct clk timer1_fck = {
+	.name		= "timer1_fck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= abe_dpll_bypass_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_TESLA_TESLA_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
-	.clkdm_name	= "tesla_clkdm",
-	.parent		= &dpll_iva_m4_ck,
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+};
+
+/* Merged cm2_dm10_mux into timer10 */
+static struct clk timer10_fck = {
+	.name		= "timer10_fck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= abe_dpll_bypass_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm11_mux into timer11 */
+static struct clk timer11_fck = {
+	.name		= "timer11_fck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= abe_dpll_bypass_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm2_mux into timer2 */
+static struct clk timer2_fck = {
+	.name		= "timer2_fck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= abe_dpll_bypass_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm3_mux into timer3 */
+static struct clk timer3_fck = {
+	.name		= "timer3_fck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= abe_dpll_bypass_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm4_mux into timer4 */
+static struct clk timer4_fck = {
+	.name		= "timer4_fck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= abe_dpll_bypass_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+static const struct clksel timer5_sync_mux_sel[] = {
+	{ .parent = &syc_clk_div_ck, .rates = div_1_0_rates },
+	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+/* Merged timer5_sync_mux into timer5 */
+static struct clk timer5_fck = {
+	.name		= "timer5_fck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged timer6_sync_mux into timer6 */
+static struct clk timer6_fck = {
+	.name		= "timer6_fck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged timer7_sync_mux into timer7 */
+static struct clk timer7_fck = {
+	.name		= "timer7_fck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged timer8_sync_mux into timer8 */
+static struct clk timer8_fck = {
+	.name		= "timer8_fck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged cm2_dm9_mux into timer9 */
+static struct clk timer9_fck = {
+	.name		= "timer9_fck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= abe_dpll_bypass_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
 };
 
 static struct clk uart1_fck = {
@@ -2265,105 +2428,148 @@ static struct clk uart4_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk unipro1_fck = {
-	.name		= "unipro1_fck",
+static struct clk usb_host_fs_fck = {
+	.name		= "usb_host_fs_fck",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
 	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &func_96m_fclk,
+	.parent		= &func_48mc_fclk,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usb_host_fck = {
-	.name		= "usb_host_fck",
+static struct clk usb_host_hs_utmi_p3_clk = {
+	.name		= "usb_host_hs_utmi_p3_clk",
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT,
 	.clkdm_name	= "l3_init_clkdm",
 	.parent		= &init_60m_fclk,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usb_host_fs_fck = {
-	.name		= "usb_host_fs_fck",
+static struct clk usb_host_hs_hsic60m_p1_clk = {
+	.name		= "usb_host_hs_hsic60m_p1_clk",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT,
 	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &func_48mc_fclk,
+	.parent		= &init_60m_fclk,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usb_otg_ick = {
-	.name		= "usb_otg_ick",
+static struct clk usb_host_hs_hsic60m_p2_clk = {
+	.name		= "usb_host_hs_hsic60m_p2_clk",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT,
 	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &l3_div_ck,
+	.parent		= &init_60m_fclk,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usb_tll_ick = {
-	.name		= "usb_tll_ick",
+static const struct clksel utmi_p1_gfclk_sel[] = {
+	{ .parent = &init_60m_fclk, .rates = div_1_0_rates },
+	{ .parent = &xclk60mhsp1_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk utmi_p1_gfclk = {
+	.name		= "utmi_p1_gfclk",
+	.parent		= &init_60m_fclk,
+	.clksel		= utmi_p1_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P1_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk usb_host_hs_utmi_p1_clk = {
+	.name		= "usb_host_hs_utmi_p1_clk",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT,
 	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &l4_div_ck,
+	.parent		= &utmi_p1_gfclk,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usbphyocp2scp_ick = {
-	.name		= "usbphyocp2scp_ick",
+static const struct clksel utmi_p2_gfclk_sel[] = {
+	{ .parent = &init_60m_fclk, .rates = div_1_0_rates },
+	{ .parent = &xclk60mhsp2_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk utmi_p2_gfclk = {
+	.name		= "utmi_p2_gfclk",
+	.parent		= &init_60m_fclk,
+	.clksel		= utmi_p2_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P2_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk usb_host_hs_utmi_p2_clk = {
+	.name		= "usb_host_hs_utmi_p2_clk",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT,
 	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &l4_div_ck,
+	.parent		= &utmi_p2_gfclk,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usim_fck = {
-	.name		= "usim_fck",
+static struct clk usb_host_hs_hsic480m_p1_clk = {
+	.name		= "usb_host_hs_hsic480m_p1_clk",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.parent		= &sys_32k_ck,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &dpll_usb_m2_ck,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk wdt2_fck = {
-	.name		= "wdt2_fck",
+static struct clk usb_host_hs_hsic480m_p2_clk = {
+	.name		= "usb_host_hs_hsic480m_p2_clk",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_WKUP_WDT2_CLKCTRL,
-	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.parent		= &sys_32k_ck,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &dpll_usb_m2_ck,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk wdt3_fck = {
-	.name		= "wdt3_fck",
+static struct clk usb_host_hs_func48mclk = {
+	.name		= "usb_host_hs_func48mclk",
 	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM1_ABE_WDT3_CLKCTRL,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &func_48mc_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_host_hs_fck = {
+	.name		= "usb_host_hs_fck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
-	.clkdm_name	= "abe_clkdm",
-	.parent		= &sys_32k_ck,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &init_60m_fclk,
 	.recalc		= &followparent_recalc,
 };
 
-/* Remaining optional clocks */
 static const struct clksel otg_60m_gfclk_sel[] = {
 	{ .parent = &utmi_phy_clkout_ck, .rates = div_1_0_rates },
 	{ .parent = &xclk60motg_ck, .rates = div_1_1_rates },
 	{ .parent = NULL },
 };
 
-static struct clk otg_60m_gfclk_ck = {
-	.name		= "otg_60m_gfclk_ck",
+static struct clk otg_60m_gfclk = {
+	.name		= "otg_60m_gfclk",
 	.parent		= &utmi_phy_clkout_ck,
 	.clksel		= otg_60m_gfclk_sel,
 	.init		= &omap2_init_clksel_parent,
@@ -2373,38 +2579,74 @@ static struct clk otg_60m_gfclk_ck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static const struct clksel stm_clk_div_div[] = {
-	{ .parent = &pmd_stm_clock_mux_ck, .rates = div3_1to4_rates },
-	{ .parent = NULL },
+static struct clk usb_otg_hs_xclk = {
+	.name		= "usb_otg_hs_xclk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_XCLK_SHIFT,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &otg_60m_gfclk,
+	.recalc		= &followparent_recalc,
 };
 
-static struct clk stm_clk_div_ck = {
-	.name		= "stm_clk_div_ck",
-	.parent		= &pmd_stm_clock_mux_ck,
-	.clksel		= stm_clk_div_div,
-	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_PMD_STM_CLK_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
+static struct clk usb_otg_hs_ick = {
+	.name		= "usb_otg_hs_ick",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
 };
 
-static const struct clksel trace_clk_div_div[] = {
-	{ .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates },
-	{ .parent = NULL },
+static struct clk usb_phy_cm_clk32k = {
+	.name		= "usb_phy_cm_clk32k",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_ALWON_USBPHY_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_CLK32K_SHIFT,
+	.clkdm_name	= "l4_ao_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
 };
 
-static struct clk trace_clk_div_ck = {
-	.name		= "trace_clk_div_ck",
-	.parent		= &pmd_trace_clk_mux_ck,
-	.clksel		= trace_clk_div_div,
-	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
-	.ops		= &clkops_null,
-	.recalc		= &omap2_clksel_recalc,
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap2_clksel_set_rate,
+static struct clk usb_tll_hs_usb_ch2_clk = {
+	.name		= "usb_tll_hs_usb_ch2_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &init_60m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_tll_hs_usb_ch0_clk = {
+	.name		= "usb_tll_hs_usb_ch0_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &init_60m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_tll_hs_usb_ch1_clk = {
+	.name		= "usb_tll_hs_usb_ch1_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &init_60m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_tll_hs_ick = {
+	.name		= "usb_tll_hs_ick",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
 };
 
 static const struct clksel_rate div2_14to18_rates[] = {
@@ -2418,8 +2660,8 @@ static const struct clksel usim_fclk_div[] = {
 	{ .parent = NULL },
 };
 
-static struct clk usim_fclk = {
-	.name		= "usim_fclk",
+static struct clk usim_ck = {
+	.name		= "usim_ck",
 	.parent		= &dpll_per_m4_ck,
 	.clksel		= usim_fclk_div,
 	.clksel_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
@@ -2430,38 +2672,79 @@ static struct clk usim_fclk = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static const struct clksel utmi_p1_gfclk_sel[] = {
-	{ .parent = &init_60m_fclk, .rates = div_1_0_rates },
-	{ .parent = &xclk60mhsp1_ck, .rates = div_1_1_rates },
+static struct clk usim_fclk = {
+	.name		= "usim_fclk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_FCLK_SHIFT,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &usim_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usim_fck = {
+	.name		= "usim_fck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wd_timer2_fck = {
+	.name		= "wd_timer2_fck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_WKUP_WDT2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wd_timer3_fck = {
+	.name		= "wd_timer3_fck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_WDT3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
+/* Remaining optional clocks */
+static const struct clksel stm_clk_div_div[] = {
+	{ .parent = &pmd_stm_clock_mux_ck, .rates = div3_1to4_rates },
 	{ .parent = NULL },
 };
 
-static struct clk utmi_p1_gfclk_ck = {
-	.name		= "utmi_p1_gfclk_ck",
-	.parent		= &init_60m_fclk,
-	.clksel		= utmi_p1_gfclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P1_MASK,
+static struct clk stm_clk_div_ck = {
+	.name		= "stm_clk_div_ck",
+	.parent		= &pmd_stm_clock_mux_ck,
+	.clksel		= stm_clk_div_div,
+	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_PMD_STM_CLK_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static const struct clksel utmi_p2_gfclk_sel[] = {
-	{ .parent = &init_60m_fclk, .rates = div_1_0_rates },
-	{ .parent = &xclk60mhsp2_ck, .rates = div_1_1_rates },
+static const struct clksel trace_clk_div_div[] = {
+	{ .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates },
 	{ .parent = NULL },
 };
 
-static struct clk utmi_p2_gfclk_ck = {
-	.name		= "utmi_p2_gfclk_ck",
-	.parent		= &init_60m_fclk,
-	.clksel		= utmi_p2_gfclk_sel,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P2_MASK,
+static struct clk trace_clk_div_ck = {
+	.name		= "trace_clk_div_ck",
+	.parent		= &pmd_trace_clk_mux_ck,
+	.clksel		= trace_clk_div_div,
+	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
 	.ops		= &clkops_null,
 	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
 };
 
 /*
@@ -2483,11 +2766,12 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"virt_27000000_ck",		&virt_27000000_ck,	CK_443X),
 	CLK(NULL,	"virt_38400000_ck",		&virt_38400000_ck,	CK_443X),
 	CLK(NULL,	"sys_clkin_ck",			&sys_clkin_ck,	CK_443X),
+	CLK(NULL,	"tie_low_clock_ck",		&tie_low_clock_ck,	CK_443X),
 	CLK(NULL,	"utmi_phy_clkout_ck",		&utmi_phy_clkout_ck,	CK_443X),
 	CLK(NULL,	"xclk60mhsp1_ck",		&xclk60mhsp1_ck,	CK_443X),
 	CLK(NULL,	"xclk60mhsp2_ck",		&xclk60mhsp2_ck,	CK_443X),
 	CLK(NULL,	"xclk60motg_ck",		&xclk60motg_ck,	CK_443X),
-	CLK(NULL,	"dpll_sys_ref_clk",		&dpll_sys_ref_clk,	CK_443X),
+	CLK(NULL,	"abe_dpll_bypass_clk_mux_ck",	&abe_dpll_bypass_clk_mux_ck,	CK_443X),
 	CLK(NULL,	"abe_dpll_refclk_mux_ck",	&abe_dpll_refclk_mux_ck,	CK_443X),
 	CLK(NULL,	"dpll_abe_ck",			&dpll_abe_ck,	CK_443X),
 	CLK(NULL,	"dpll_abe_m2x2_ck",		&dpll_abe_m2x2_ck,	CK_443X),
@@ -2557,46 +2841,48 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"aes1_fck",			&aes1_fck,	CK_443X),
 	CLK(NULL,	"aes2_fck",			&aes2_fck,	CK_443X),
 	CLK(NULL,	"aess_fck",			&aess_fck,	CK_443X),
-	CLK(NULL,	"cust_efuse_fck",		&cust_efuse_fck,	CK_443X),
+	CLK(NULL,	"bandgap_fclk",			&bandgap_fclk,	CK_443X),
 	CLK(NULL,	"des3des_fck",			&des3des_fck,	CK_443X),
 	CLK(NULL,	"dmic_sync_mux_ck",		&dmic_sync_mux_ck,	CK_443X),
 	CLK(NULL,	"dmic_fck",			&dmic_fck,	CK_443X),
+	CLK(NULL,	"dsp_fck",			&dsp_fck,	CK_443X),
+	CLK(NULL,	"dss_sys_clk",			&dss_sys_clk,	CK_443X),
+	CLK(NULL,	"dss_tv_clk",			&dss_tv_clk,	CK_443X),
+	CLK(NULL,	"dss_dss_clk",			&dss_dss_clk,	CK_443X),
+	CLK(NULL,	"dss_48mhz_clk",		&dss_48mhz_clk,	CK_443X),
 	CLK(NULL,	"dss_fck",			&dss_fck,	CK_443X),
-	CLK(NULL,	"ducati_ick",			&ducati_ick,	CK_443X),
-	CLK(NULL,	"emif1_ick",			&emif1_ick,	CK_443X),
-	CLK(NULL,	"emif2_ick",			&emif2_ick,	CK_443X),
+	CLK(NULL,	"efuse_ctrl_cust_fck",		&efuse_ctrl_cust_fck,	CK_443X),
+	CLK(NULL,	"emif1_fck",			&emif1_fck,	CK_443X),
+	CLK(NULL,	"emif2_fck",			&emif2_fck,	CK_443X),
 	CLK(NULL,	"fdif_fck",			&fdif_fck,	CK_443X),
-	CLK(NULL,	"per_sgx_fclk",			&per_sgx_fclk,	CK_443X),
-	CLK(NULL,	"gfx_fck",			&gfx_fck,	CK_443X),
+	CLK(NULL,	"fpka_fck",			&fpka_fck,	CK_443X),
+	CLK(NULL,	"gpio1_dbck",			&gpio1_dbclk,	CK_443X),
 	CLK(NULL,	"gpio1_ick",			&gpio1_ick,	CK_443X),
+	CLK(NULL,	"gpio2_dbck",			&gpio2_dbclk,	CK_443X),
 	CLK(NULL,	"gpio2_ick",			&gpio2_ick,	CK_443X),
+	CLK(NULL,	"gpio3_dbck",			&gpio3_dbclk,	CK_443X),
 	CLK(NULL,	"gpio3_ick",			&gpio3_ick,	CK_443X),
+	CLK(NULL,	"gpio4_dbck",			&gpio4_dbclk,	CK_443X),
 	CLK(NULL,	"gpio4_ick",			&gpio4_ick,	CK_443X),
+	CLK(NULL,	"gpio5_dbck",			&gpio5_dbclk,	CK_443X),
 	CLK(NULL,	"gpio5_ick",			&gpio5_ick,	CK_443X),
+	CLK(NULL,	"gpio6_dbck",			&gpio6_dbclk,	CK_443X),
 	CLK(NULL,	"gpio6_ick",			&gpio6_ick,	CK_443X),
 	CLK(NULL,	"gpmc_ick",			&gpmc_ick,	CK_443X),
-	CLK(NULL,	"gpt1_fck",			&gpt1_fck,	CK_443X),
-	CLK(NULL,	"gpt10_fck",			&gpt10_fck,	CK_443X),
-	CLK(NULL,	"gpt11_fck",			&gpt11_fck,	CK_443X),
-	CLK(NULL,	"gpt2_fck",			&gpt2_fck,	CK_443X),
-	CLK(NULL,	"gpt3_fck",			&gpt3_fck,	CK_443X),
-	CLK(NULL,	"gpt4_fck",			&gpt4_fck,	CK_443X),
-	CLK(NULL,	"gpt5_fck",			&gpt5_fck,	CK_443X),
-	CLK(NULL,	"gpt6_fck",			&gpt6_fck,	CK_443X),
-	CLK(NULL,	"gpt7_fck",			&gpt7_fck,	CK_443X),
-	CLK(NULL,	"gpt8_fck",			&gpt8_fck,	CK_443X),
-	CLK(NULL,	"gpt9_fck",			&gpt9_fck,	CK_443X),
+	CLK(NULL,	"gpu_fck",			&gpu_fck,	CK_443X),
 	CLK("omap2_hdq.0",	"fck",				&hdq1w_fck,	CK_443X),
-	CLK(NULL,	"hsi_ick",			&hsi_ick,	CK_443X),
+	CLK(NULL,	"hsi_fck",			&hsi_fck,	CK_443X),
 	CLK("i2c_omap.1",	"fck",				&i2c1_fck,	CK_443X),
 	CLK("i2c_omap.2",	"fck",				&i2c2_fck,	CK_443X),
 	CLK("i2c_omap.3",	"fck",				&i2c3_fck,	CK_443X),
 	CLK("i2c_omap.4",	"fck",				&i2c4_fck,	CK_443X),
+	CLK(NULL,	"ipu_fck",			&ipu_fck,	CK_443X),
+	CLK(NULL,	"iss_ctrlclk",			&iss_ctrlclk,	CK_443X),
 	CLK(NULL,	"iss_fck",			&iss_fck,	CK_443X),
-	CLK(NULL,	"ivahd_ick",			&ivahd_ick,	CK_443X),
-	CLK(NULL,	"keyboard_fck",			&keyboard_fck,	CK_443X),
-	CLK(NULL,	"l3_instr_interconnect_ick",	&l3_instr_interconnect_ick,	CK_443X),
-	CLK(NULL,	"l3_interconnect_3_ick",	&l3_interconnect_3_ick,	CK_443X),
+	CLK(NULL,	"iva_fck",			&iva_fck,	CK_443X),
+	CLK(NULL,	"kbd_fck",			&kbd_fck,	CK_443X),
+	CLK(NULL,	"l3_instr_ick",			&l3_instr_ick,	CK_443X),
+	CLK(NULL,	"l3_main_3_ick",		&l3_main_3_ick,	CK_443X),
 	CLK(NULL,	"mcasp_sync_mux_ck",		&mcasp_sync_mux_ck,	CK_443X),
 	CLK(NULL,	"mcasp_fck",			&mcasp_fck,	CK_443X),
 	CLK(NULL,	"mcbsp1_sync_mux_ck",		&mcbsp1_sync_mux_ck,	CK_443X),
@@ -2607,6 +2893,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("omap-mcbsp.3",	"fck",				&mcbsp3_fck,	CK_443X),
 	CLK(NULL,	"mcbsp4_sync_mux_ck",		&mcbsp4_sync_mux_ck,	CK_443X),
 	CLK("omap-mcbsp.4",	"fck",				&mcbsp4_fck,	CK_443X),
+	CLK(NULL,	"mcpdm_fck",			&mcpdm_fck,	CK_443X),
 	CLK("omap2_mcspi.1",	"fck",				&mcspi1_fck,	CK_443X),
 	CLK("omap2_mcspi.2",	"fck",				&mcspi2_fck,	CK_443X),
 	CLK("omap2_mcspi.3",	"fck",				&mcspi3_fck,	CK_443X),
@@ -2616,43 +2903,66 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("mmci-omap-hs.2",	"fck",				&mmc3_fck,	CK_443X),
 	CLK("mmci-omap-hs.3",	"fck",				&mmc4_fck,	CK_443X),
 	CLK("mmci-omap-hs.4",	"fck",				&mmc5_fck,	CK_443X),
-	CLK(NULL,	"ocp_wp1_ick",			&ocp_wp1_ick,	CK_443X),
-	CLK(NULL,	"pdm_fck",			&pdm_fck,	CK_443X),
-	CLK(NULL,	"pkaeip29_fck",			&pkaeip29_fck,	CK_443X),
+	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m,	CK_443X),
+	CLK(NULL,	"ocp2scp_usb_phy_ick",		&ocp2scp_usb_phy_ick,	CK_443X),
+	CLK(NULL,	"ocp_wp_noc_ick",		&ocp_wp_noc_ick,	CK_443X),
 	CLK("omap_rng",	"ick",				&rng_ick,	CK_443X),
-	CLK(NULL,	"sha2md51_fck",			&sha2md51_fck,	CK_443X),
-	CLK(NULL,	"sl2_ick",			&sl2_ick,	CK_443X),
+	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck,	CK_443X),
+	CLK(NULL,	"sl2if_ick",			&sl2if_ick,	CK_443X),
+	CLK(NULL,	"slimbus1_fclk_1",		&slimbus1_fclk_1,	CK_443X),
+	CLK(NULL,	"slimbus1_fclk_0",		&slimbus1_fclk_0,	CK_443X),
+	CLK(NULL,	"slimbus1_fclk_2",		&slimbus1_fclk_2,	CK_443X),
+	CLK(NULL,	"slimbus1_slimbus_clk",		&slimbus1_slimbus_clk,	CK_443X),
 	CLK(NULL,	"slimbus1_fck",			&slimbus1_fck,	CK_443X),
+	CLK(NULL,	"slimbus2_fclk_1",		&slimbus2_fclk_1,	CK_443X),
+	CLK(NULL,	"slimbus2_fclk_0",		&slimbus2_fclk_0,	CK_443X),
+	CLK(NULL,	"slimbus2_slimbus_clk",		&slimbus2_slimbus_clk,	CK_443X),
 	CLK(NULL,	"slimbus2_fck",			&slimbus2_fck,	CK_443X),
-	CLK(NULL,	"sr_core_fck",			&sr_core_fck,	CK_443X),
-	CLK(NULL,	"sr_iva_fck",			&sr_iva_fck,	CK_443X),
-	CLK(NULL,	"sr_mpu_fck",			&sr_mpu_fck,	CK_443X),
-	CLK(NULL,	"tesla_ick",			&tesla_ick,	CK_443X),
+	CLK(NULL,	"smartreflex_core_fck",		&smartreflex_core_fck,	CK_443X),
+	CLK(NULL,	"smartreflex_iva_fck",		&smartreflex_iva_fck,	CK_443X),
+	CLK(NULL,	"smartreflex_mpu_fck",		&smartreflex_mpu_fck,	CK_443X),
+	CLK(NULL,	"gpt1_fck",			&timer1_fck,	CK_443X),
+	CLK(NULL,	"gpt10_fck",			&timer10_fck,	CK_443X),
+	CLK(NULL,	"gpt11_fck",			&timer11_fck,	CK_443X),
+	CLK(NULL,	"gpt2_fck",			&timer2_fck,	CK_443X),
+	CLK(NULL,	"gpt3_fck",			&timer3_fck,	CK_443X),
+	CLK(NULL,	"gpt4_fck",			&timer4_fck,	CK_443X),
+	CLK(NULL,	"gpt5_fck",			&timer5_fck,	CK_443X),
+	CLK(NULL,	"gpt6_fck",			&timer6_fck,	CK_443X),
+	CLK(NULL,	"gpt7_fck",			&timer7_fck,	CK_443X),
+	CLK(NULL,	"gpt8_fck",			&timer8_fck,	CK_443X),
+	CLK(NULL,	"gpt9_fck",			&timer9_fck,	CK_443X),
 	CLK(NULL,	"uart1_fck",			&uart1_fck,	CK_443X),
 	CLK(NULL,	"uart2_fck",			&uart2_fck,	CK_443X),
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
 	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
-	CLK(NULL,	"unipro1_fck",			&unipro1_fck,	CK_443X),
-	CLK(NULL,	"usb_host_fck",			&usb_host_fck,	CK_443X),
 	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck,	CK_443X),
-	CLK("musb_hdrc",	"ick",				&usb_otg_ick,	CK_443X),
-	CLK(NULL,	"usb_tll_ick",			&usb_tll_ick,	CK_443X),
-	CLK(NULL,	"usbphyocp2scp_ick",		&usbphyocp2scp_ick,	CK_443X),
+	CLK(NULL,	"usb_host_hs_utmi_p3_clk",	&usb_host_hs_utmi_p3_clk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_hsic60m_p1_clk",	&usb_host_hs_hsic60m_p1_clk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk,	CK_443X),
+	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk,	CK_443X),
+	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_utmi_p2_clk",	&usb_host_hs_utmi_p2_clk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_hsic480m_p1_clk",	&usb_host_hs_hsic480m_p1_clk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck,	CK_443X),
+	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk,	CK_443X),
+	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk,	CK_443X),
+	CLK("musb_hdrc",	"ick",				&usb_otg_hs_ick,	CK_443X),
+	CLK(NULL,	"usb_phy_cm_clk32k",		&usb_phy_cm_clk32k,	CK_443X),
+	CLK(NULL,	"usb_tll_hs_usb_ch2_clk",	&usb_tll_hs_usb_ch2_clk,	CK_443X),
+	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk,	CK_443X),
+	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk,	CK_443X),
+	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick,	CK_443X),
+	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
+	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),
-	CLK("omap_wdt",	"fck",				&wdt2_fck,	CK_443X),
-	CLK(NULL,	"wdt3_fck",			&wdt3_fck,	CK_443X),
-	CLK(NULL,	"otg_60m_gfclk_ck",		&otg_60m_gfclk_ck,	CK_443X),
+	CLK("omap_wdt",	"fck",				&wd_timer2_fck,	CK_443X),
+	CLK(NULL,	"wd_timer3_fck",		&wd_timer3_fck,	CK_443X),
 	CLK(NULL,	"stm_clk_div_ck",		&stm_clk_div_ck,	CK_443X),
 	CLK(NULL,	"trace_clk_div_ck",		&trace_clk_div_ck,	CK_443X),
-	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
-	CLK(NULL,	"utmi_p1_gfclk_ck",		&utmi_p1_gfclk_ck,	CK_443X),
-	CLK(NULL,	"utmi_p2_gfclk_ck",		&utmi_p2_gfclk_ck,	CK_443X),
-	CLK(NULL,	"gpio1_dbck",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpio2_dbck",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpio3_dbck",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpio4_dbck",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpio5_dbck",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpio6_dbck",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"gpmc_ck",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"gpt1_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"gpt2_ick",			&dummy_ck,	CK_443X),
@@ -2669,19 +2979,19 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("i2c_omap.2",	"ick",				&dummy_ck,	CK_443X),
 	CLK("i2c_omap.3",	"ick",				&dummy_ck,	CK_443X),
 	CLK("i2c_omap.4",	"ick",				&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.0",	"ick",				&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.1",	"ick",				&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.2",	"ick",				&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.3",	"ick",				&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.4",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap-mcbsp.1",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap-mcbsp.2",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap-mcbsp.3",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap-mcbsp.4",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap2_mcspi.1",	"ick",			&dummy_ck,	CK_443X),
-	CLK("omap2_mcspi.2",	"ick",			&dummy_ck,	CK_443X),
-	CLK("omap2_mcspi.3",	"ick",			&dummy_ck,	CK_443X),
-	CLK("omap2_mcspi.4",	"ick",			&dummy_ck,	CK_443X),
-	CLK("mmci-omap-hs.0",	"ick",		&dummy_ck,	CK_443X),
-	CLK("mmci-omap-hs.1",	"ick",		&dummy_ck,	CK_443X),
-	CLK("mmci-omap-hs.2",	"ick",		&dummy_ck,	CK_443X),
-	CLK("mmci-omap-hs.3",	"ick",		&dummy_ck,	CK_443X),
-	CLK("mmci-omap-hs.4",	"ick",		&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.1",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.2",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.3",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap2_mcspi.4",	"ick",				&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart1_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart2_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart3_ick",			&dummy_ck,	CK_443X),
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 5d80cb897489..6fb61b1a0d46 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -258,97 +258,6 @@ static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
 
 }
 
-/**
- * _init_wkdep_usecount - initialize wkdep usecounts to match hardware
- * @clkdm: clockdomain to initialize wkdep usecounts
- *
- * Initialize the wakeup dependency usecount variables for clockdomain @clkdm.
- * If a wakeup dependency is present in the hardware, the usecount will be
- * set to 1; otherwise, it will be set to 0.  Software should clear all
- * software wakeup dependencies prior to calling this function if it wishes
- * to ensure that all usecounts start at 0.  No return value.
- */
-static void _init_wkdep_usecount(struct clockdomain *clkdm)
-{
-	u32 v;
-	struct clkdm_dep *cd;
-
-	if (!clkdm->wkdep_srcs)
-		return;
-
-	for (cd = clkdm->wkdep_srcs; cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
-
-		if (!cd->clkdm && cd->clkdm_name)
-			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
-
-		if (!cd->clkdm) {
-			WARN(!cd->clkdm, "clockdomain: %s: wkdep clkdm %s not "
-			     "found\n", clkdm->name, cd->clkdm_name);
-			continue;
-		}
-
-		v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
-					    PM_WKDEP,
-					    (1 << cd->clkdm->dep_bit));
-
-		if (v)
-			pr_debug("clockdomain: %s: wakeup dependency already "
-				 "set to wake up when %s wakes\n",
-				 clkdm->name, cd->clkdm->name);
-
-		atomic_set(&cd->wkdep_usecount, (v) ? 1 : 0);
-	}
-}
-
-/**
- * _init_sleepdep_usecount - initialize sleepdep usecounts to match hardware
- * @clkdm: clockdomain to initialize sleepdep usecounts
- *
- * Initialize the sleep dependency usecount variables for clockdomain @clkdm.
- * If a sleep dependency is present in the hardware, the usecount will be
- * set to 1; otherwise, it will be set to 0.  Software should clear all
- * software sleep dependencies prior to calling this function if it wishes
- * to ensure that all usecounts start at 0.  No return value.
- */
-static void _init_sleepdep_usecount(struct clockdomain *clkdm)
-{
-	u32 v;
-	struct clkdm_dep *cd;
-
-	if (!cpu_is_omap34xx())
-		return;
-
-	if (!clkdm->sleepdep_srcs)
-		return;
-
-	for (cd = clkdm->sleepdep_srcs; cd->clkdm_name; cd++) {
-		if (!omap_chip_is(cd->omap_chip))
-			continue;
-
-		if (!cd->clkdm && cd->clkdm_name)
-			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
-
-		if (!cd->clkdm) {
-			WARN(!cd->clkdm, "clockdomain: %s: sleepdep clkdm %s "
-			     "not found\n", clkdm->name, cd->clkdm_name);
-			continue;
-		}
-
-		v = prm_read_mod_bits_shift(clkdm->pwrdm.ptr->prcm_offs,
-					    OMAP3430_CM_SLEEPDEP,
-					    (1 << cd->clkdm->dep_bit));
-
-		if (v)
-			pr_debug("clockdomain: %s: sleep dependency already "
-				 "set to prevent from idling until %s "
-				 "idles\n", clkdm->name, cd->clkdm->name);
-
-		atomic_set(&cd->sleepdep_usecount, (v) ? 1 : 0);
-	}
-};
-
 /* Public functions */
 
 /**
@@ -379,12 +288,17 @@ void clkdm_init(struct clockdomain **clkdms,
 			_autodep_lookup(autodep);
 
 	/*
-	 * Ensure that the *dep_usecount registers reflect the current
-	 * state of the PRCM.
+	 * Put all clockdomains into software-supervised mode; PM code
+	 * should later enable hardware-supervised mode as appropriate
 	 */
 	list_for_each_entry(clkdm, &clkdm_list, node) {
-		_init_wkdep_usecount(clkdm);
-		_init_sleepdep_usecount(clkdm);
+		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+			omap2_clkdm_wakeup(clkdm);
+		else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO)
+			omap2_clkdm_deny_idle(clkdm);
+
+		clkdm_clear_all_wkdeps(clkdm);
+		clkdm_clear_all_sleepdeps(clkdm);
 	}
 }
 
@@ -592,6 +506,9 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
 		if (!omap_chip_is(cd->omap_chip))
 			continue;
 
+		if (!cd->clkdm && cd->clkdm_name)
+			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
 		/* PRM accesses are slow, so minimize them */
 		mask |= 1 << cd->clkdm->dep_bit;
 		atomic_set(&cd->wkdep_usecount, 0);
@@ -752,6 +669,9 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
 		if (!omap_chip_is(cd->omap_chip))
 			continue;
 
+		if (!cd->clkdm && cd->clkdm_name)
+			cd->clkdm = _clkdm_lookup(cd->clkdm_name);
+
 		/* PRM accesses are slow, so minimize them */
 		mask |= 1 << cd->clkdm->dep_bit;
 		atomic_set(&cd->sleepdep_usecount, 0);
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index fe82b79d5f3b..4f959a7d881c 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -649,6 +649,8 @@
 #define OMAP3430_ST_MCBSP2_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_PER */
+#define OMAP3630_AUTO_UART4_MASK			(1 << 18)
+#define OMAP3630_AUTO_UART4_SHIFT			18
 #define OMAP3430_AUTO_GPIO6_MASK			(1 << 17)
 #define OMAP3430_AUTO_GPIO6_SHIFT			17
 #define OMAP3430_AUTO_GPIO5_MASK			(1 << 16)
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
index ac8458e43252..0b72be433776 100644
--- a/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -1,8 +1,8 @@
 /*
  * OMAP44xx Clock Management register bits
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
  * Rajendra Nayak (rnayak@ti.com)
@@ -25,453 +25,459 @@
 #include "cm.h"
 
 
-/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
+/*
+ * Used by CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP,
+ * CM_TESLA_DYNAMICDEP
+ */
 #define OMAP4430_ABE_DYNDEP_SHIFT				3
-#define OMAP4430_ABE_DYNDEP_MASK				BITFIELD(3, 3)
+#define OMAP4430_ABE_DYNDEP_MASK				(1 << 3)
 
 /*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP,
- * CM_TESLA_STATICDEP
+ * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP,
+ * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP
  */
 #define OMAP4430_ABE_STATDEP_SHIFT				3
-#define OMAP4430_ABE_STATDEP_MASK				BITFIELD(3, 3)
+#define OMAP4430_ABE_STATDEP_MASK				(1 << 3)
 
-/* Used by CM_L4CFG_DYNAMICDEP */
+/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */
 #define OMAP4430_ALWONCORE_DYNDEP_SHIFT				16
-#define OMAP4430_ALWONCORE_DYNDEP_MASK				BITFIELD(16, 16)
+#define OMAP4430_ALWONCORE_DYNDEP_MASK				(1 << 16)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
 #define OMAP4430_ALWONCORE_STATDEP_SHIFT			16
-#define OMAP4430_ALWONCORE_STATDEP_MASK				BITFIELD(16, 16)
+#define OMAP4430_ALWONCORE_STATDEP_MASK				(1 << 16)
 
 /*
- * Used by CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB,
- * CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE,
- * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU
+ * Used by CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE,
+ * CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_DDRPHY,
+ * CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER,
+ * CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB
  */
 #define OMAP4430_AUTO_DPLL_MODE_SHIFT				0
-#define OMAP4430_AUTO_DPLL_MODE_MASK				BITFIELD(0, 2)
+#define OMAP4430_AUTO_DPLL_MODE_MASK				(0x7 << 0)
 
-/* Used by CM_L4CFG_DYNAMICDEP */
+/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */
 #define OMAP4430_CEFUSE_DYNDEP_SHIFT				17
-#define OMAP4430_CEFUSE_DYNDEP_MASK				BITFIELD(17, 17)
+#define OMAP4430_CEFUSE_DYNDEP_MASK				(1 << 17)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
 #define OMAP4430_CEFUSE_STATDEP_SHIFT				17
-#define OMAP4430_CEFUSE_STATDEP_MASK				BITFIELD(17, 17)
+#define OMAP4430_CEFUSE_STATDEP_MASK				(1 << 17)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK			BITFIELD(13, 13)
+#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK			(1 << 13)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK		BITFIELD(12, 12)
+#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK		(1 << 12)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK			(1 << 9)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT			11
-#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK			BITFIELD(11, 11)
+#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK			(1 << 11)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK			(1 << 8)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK			BITFIELD(11, 11)
+#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK			(1 << 11)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK		BITFIELD(12, 12)
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK		(1 << 12)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK		BITFIELD(13, 13)
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK		(1 << 13)
 
 /* Used by CM_CAM_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK		BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK		(1 << 9)
+
+/* Used by CM_ALWON_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_SHIFT		12
+#define OMAP4430_CLKACTIVITY_CORE_ALWON_32K_GFCLK_MASK		(1 << 12)
 
 /* Used by CM_EMU_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK		BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK		(1 << 9)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK		BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK		(1 << 9)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK			BITFIELD(10, 10)
+#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK			(1 << 10)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT			11
-#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK			BITFIELD(11, 11)
+#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK			(1 << 11)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT			12
-#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK			BITFIELD(12, 12)
+#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK			(1 << 12)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT			13
-#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK			BITFIELD(13, 13)
+#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK			(1 << 13)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT			14
-#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK			BITFIELD(14, 14)
+#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK			(1 << 14)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK		BITFIELD(10, 10)
+#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK		(1 << 10)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK			(1 << 9)
 
 /* Used by CM_DUCATI_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK			BITFIELD(8, 8)
-
-/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_MASK		BITFIELD(10, 10)
+#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK			(1 << 8)
 
 /* Used by CM_EMU_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK			(1 << 8)
 
 /* Used by CM_CAM_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK			BITFIELD(10, 10)
+#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK			(1 << 10)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT		15
-#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK		BITFIELD(15, 15)
+#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK		(1 << 15)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK		BITFIELD(10, 10)
+#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK		(1 << 10)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK		BITFIELD(11, 11)
+#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK		(1 << 11)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT		20
-#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK		BITFIELD(20, 20)
+#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK		(1 << 20)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT		26
-#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK			BITFIELD(26, 26)
+#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK			(1 << 26)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT		21
-#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK		BITFIELD(21, 21)
+#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK		(1 << 21)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT		27
-#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK			BITFIELD(27, 27)
-
-/* Used by CM_L3INIT_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_SHIFT		31
-#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_MASK		BITFIELD(31, 31)
+#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK			(1 << 27)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT		13
-#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK		BITFIELD(13, 13)
+#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK		(1 << 13)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK		BITFIELD(12, 12)
+#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK		(1 << 12)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT		28
-#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK		BITFIELD(28, 28)
+#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK		(1 << 28)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT		29
-#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK		BITFIELD(29, 29)
+#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK		(1 << 29)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK		BITFIELD(11, 11)
+#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK		(1 << 11)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT		16
-#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK		BITFIELD(16, 16)
+#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK		(1 << 16)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT		17
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK		BITFIELD(17, 17)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK		(1 << 17)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT		18
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK		BITFIELD(18, 18)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK		(1 << 18)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT		19
-#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK		BITFIELD(19, 19)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK		(1 << 19)
 
 /* Used by CM_CAM_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK			(1 << 8)
 
 /* Used by CM_IVAHD_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK		BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK		(1 << 8)
 
-/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
-#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_SHIFT	14
-#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_MASK		BITFIELD(14, 14)
+/* Used by CM_D2D_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_MASK		(1 << 10)
 
 /* Used by CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L3_2_CLKSTCTRL, CM_L3_2_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK			(1 << 8)
 
 /* Used by CM_D2D_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK			(1 << 8)
 
 /* Used by CM_SDMA_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK			(1 << 8)
 
 /* Used by CM_DSS_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK			(1 << 8)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK			(1 << 8)
 
 /* Used by CM_GFX_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L3INSTR_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK		BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK		(1 << 8)
 
 /* Used by CM_L4SEC_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK		BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK		(1 << 8)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK			(1 << 8)
 
 /* Used by CM_CEFUSE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		(1 << 8)
 
 /* Used by CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK			(1 << 8)
 
 /* Used by CM_D2D_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK			(1 << 8)
 
 /* Used by CM_L4SEC_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK		BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK		(1 << 9)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT		12
-#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK			BITFIELD(12, 12)
+#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK			(1 << 12)
 
 /* Used by CM_MPU_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK			(1 << 8)
 
 /* Used by CM1_ABE_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK			(1 << 9)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT		16
-#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK		BITFIELD(16, 16)
+#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK		(1 << 16)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT		17
-#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK			BITFIELD(17, 17)
+#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK			(1 << 17)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT		18
-#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK			BITFIELD(18, 18)
+#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK			(1 << 18)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT		19
-#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK			BITFIELD(19, 19)
+#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK			(1 << 19)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT		25
-#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK		BITFIELD(25, 25)
-
-/* Used by CM_EMU_CLKSTCTRL */
-#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_MASK		BITFIELD(10, 10)
+#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK		(1 << 25)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT		20
-#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK		BITFIELD(20, 20)
+#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK		(1 << 20)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT		21
-#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK		BITFIELD(21, 21)
+#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK		(1 << 21)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT		22
-#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK		BITFIELD(22, 22)
+#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK		(1 << 22)
 
 /* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT		24
-#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK			BITFIELD(24, 24)
+#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK			(1 << 24)
 
 /* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK			BITFIELD(10, 10)
+#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK			(1 << 10)
 
 /* Used by CM_GFX_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT			9
-#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK			(1 << 9)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK		BITFIELD(11, 11)
+#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK		(1 << 11)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT		10
-#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK			BITFIELD(10, 10)
+#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK			(1 << 10)
 
 /* Used by CM_ALWON_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT		9
-#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK			(1 << 9)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT			8
-#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK			(1 << 8)
 
 /* Used by CM_TESLA_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT		8
-#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK		BITFIELD(8, 8)
+#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK		(1 << 8)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT		22
-#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK			BITFIELD(22, 22)
+#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK			(1 << 22)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT		23
-#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK			BITFIELD(23, 23)
+#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK			(1 << 23)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT		24
-#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK			BITFIELD(24, 24)
+#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK			(1 << 24)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_SHIFT		10
+#define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_MASK		(1 << 10)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_SHIFT			14
+#define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_MASK			(1 << 14)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT		15
-#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK		BITFIELD(15, 15)
+#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK		(1 << 15)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT			10
-#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK			BITFIELD(10, 10)
+#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK			(1 << 10)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT		30
-#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK			BITFIELD(30, 30)
+#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK			(1 << 30)
 
 /* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
 #define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT		25
-#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK		BITFIELD(25, 25)
+#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK		(1 << 25)
 
 /* Used by CM_WKUP_CLKSTCTRL */
 #define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT		11
-#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK		BITFIELD(11, 11)
+#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK		(1 << 11)
 
 /*
- * Used by CM_WKUP_TIMER1_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
+ * Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL,
+ * CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
+ * CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
  * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
  * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
  * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
- * CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL,
- * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
- * CM1_ABE_TIMER8_CLKCTRL
+ * CM_WKUP_TIMER1_CLKCTRL
  */
 #define OMAP4430_CLKSEL_SHIFT					24
-#define OMAP4430_CLKSEL_MASK					BITFIELD(24, 24)
+#define OMAP4430_CLKSEL_MASK					(1 << 24)
 
 /*
  * Renamed from CLKSEL Used by CM_ABE_DSS_SYS_CLKSEL, CM_ABE_PLL_REF_CLKSEL,
- * CM_DPLL_SYS_REF_CLKSEL, CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT,
- * CM_CLKSEL_USB_60MHZ
+ * CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT, CM_CLKSEL_USB_60MHZ
  */
 #define OMAP4430_CLKSEL_0_0_SHIFT				0
-#define OMAP4430_CLKSEL_0_0_MASK				BITFIELD(0, 0)
+#define OMAP4430_CLKSEL_0_0_MASK				(1 << 0)
 
 /* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
 #define OMAP4430_CLKSEL_0_1_SHIFT				0
-#define OMAP4430_CLKSEL_0_1_MASK				BITFIELD(0, 1)
+#define OMAP4430_CLKSEL_0_1_MASK				(0x3 << 0)
 
 /* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */
 #define OMAP4430_CLKSEL_24_25_SHIFT				24
-#define OMAP4430_CLKSEL_24_25_MASK				BITFIELD(24, 25)
+#define OMAP4430_CLKSEL_24_25_MASK				(0x3 << 24)
 
 /* Used by CM_L3INIT_USB_OTG_CLKCTRL */
 #define OMAP4430_CLKSEL_60M_SHIFT				24
-#define OMAP4430_CLKSEL_60M_MASK				BITFIELD(24, 24)
+#define OMAP4430_CLKSEL_60M_MASK				(1 << 24)
 
 /* Used by CM1_ABE_AESS_CLKCTRL */
 #define OMAP4430_CLKSEL_AESS_FCLK_SHIFT				24
-#define OMAP4430_CLKSEL_AESS_FCLK_MASK				BITFIELD(24, 24)
+#define OMAP4430_CLKSEL_AESS_FCLK_MASK				(1 << 24)
 
-/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
+/* Used by CM_CLKSEL_CORE, CM_CLKSEL_CORE_RESTORE */
 #define OMAP4430_CLKSEL_CORE_SHIFT				0
-#define OMAP4430_CLKSEL_CORE_MASK				BITFIELD(0, 0)
+#define OMAP4430_CLKSEL_CORE_MASK				(1 << 0)
 
-/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */
+/*
+ * Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2_RESTORE,
+ * CM_SHADOW_FREQ_CONFIG2
+ */
 #define OMAP4430_CLKSEL_CORE_1_1_SHIFT				1
-#define OMAP4430_CLKSEL_CORE_1_1_MASK				BITFIELD(1, 1)
+#define OMAP4430_CLKSEL_CORE_1_1_MASK				(1 << 1)
 
 /* Used by CM_WKUP_USIM_CLKCTRL */
 #define OMAP4430_CLKSEL_DIV_SHIFT				24
-#define OMAP4430_CLKSEL_DIV_MASK				BITFIELD(24, 24)
+#define OMAP4430_CLKSEL_DIV_MASK				(1 << 24)
 
 /* Used by CM_CAM_FDIF_CLKCTRL */
 #define OMAP4430_CLKSEL_FCLK_SHIFT				24
-#define OMAP4430_CLKSEL_FCLK_MASK				BITFIELD(24, 25)
+#define OMAP4430_CLKSEL_FCLK_MASK				(0x3 << 24)
 
 /* Used by CM_L4PER_MCBSP4_CLKCTRL */
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT			25
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK			BITFIELD(25, 25)
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK			(1 << 25)
 
 /*
  * Renamed from CLKSEL_INTERNAL_SOURCE Used by CM1_ABE_DMIC_CLKCTRL,
@@ -479,836 +485,869 @@
  * CM1_ABE_MCBSP3_CLKCTRL
  */
 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT	26
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK	BITFIELD(26, 27)
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK	(0x3 << 26)
 
-/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
+/* Used by CM_CLKSEL_CORE, CM_CLKSEL_CORE_RESTORE */
 #define OMAP4430_CLKSEL_L3_SHIFT				4
-#define OMAP4430_CLKSEL_L3_MASK					BITFIELD(4, 4)
+#define OMAP4430_CLKSEL_L3_MASK					(1 << 4)
 
-/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
+/*
+ * Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2_RESTORE,
+ * CM_SHADOW_FREQ_CONFIG2
+ */
 #define OMAP4430_CLKSEL_L3_SHADOW_SHIFT				2
-#define OMAP4430_CLKSEL_L3_SHADOW_MASK				BITFIELD(2, 2)
+#define OMAP4430_CLKSEL_L3_SHADOW_MASK				(1 << 2)
 
-/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
+/* Used by CM_CLKSEL_CORE, CM_CLKSEL_CORE_RESTORE */
 #define OMAP4430_CLKSEL_L4_SHIFT				8
-#define OMAP4430_CLKSEL_L4_MASK					BITFIELD(8, 8)
+#define OMAP4430_CLKSEL_L4_MASK					(1 << 8)
 
 /* Used by CM_CLKSEL_ABE */
 #define OMAP4430_CLKSEL_OPP_SHIFT				0
-#define OMAP4430_CLKSEL_OPP_MASK				BITFIELD(0, 1)
-
-/* Used by CM_GFX_GFX_CLKCTRL */
-#define OMAP4430_CLKSEL_PER_192M_SHIFT				25
-#define OMAP4430_CLKSEL_PER_192M_MASK				BITFIELD(25, 26)
+#define OMAP4430_CLKSEL_OPP_MASK				(0x3 << 0)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT			27
-#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK			BITFIELD(27, 29)
+#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK			(0x7 << 27)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT			24
-#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK			BITFIELD(24, 26)
+#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK			(0x7 << 24)
 
 /* Used by CM_GFX_GFX_CLKCTRL */
 #define OMAP4430_CLKSEL_SGX_FCLK_SHIFT				24
-#define OMAP4430_CLKSEL_SGX_FCLK_MASK				BITFIELD(24, 24)
+#define OMAP4430_CLKSEL_SGX_FCLK_MASK				(1 << 24)
 
 /*
  * Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL,
  * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL
  */
 #define OMAP4430_CLKSEL_SOURCE_SHIFT				24
-#define OMAP4430_CLKSEL_SOURCE_MASK				BITFIELD(24, 25)
+#define OMAP4430_CLKSEL_SOURCE_MASK				(0x3 << 24)
 
 /* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */
 #define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT			24
-#define OMAP4430_CLKSEL_SOURCE_24_24_MASK			BITFIELD(24, 24)
+#define OMAP4430_CLKSEL_SOURCE_24_24_MASK			(1 << 24)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
 #define OMAP4430_CLKSEL_UTMI_P1_SHIFT				24
-#define OMAP4430_CLKSEL_UTMI_P1_MASK				BITFIELD(24, 24)
+#define OMAP4430_CLKSEL_UTMI_P1_MASK				(1 << 24)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
 #define OMAP4430_CLKSEL_UTMI_P2_SHIFT				25
-#define OMAP4430_CLKSEL_UTMI_P2_MASK				BITFIELD(25, 25)
+#define OMAP4430_CLKSEL_UTMI_P2_MASK				(1 << 25)
 
 /*
- * Used by CM_WKUP_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_D2D_CLKSTCTRL,
- * CM_DUCATI_CLKSTCTRL, CM_L3INSTR_CLKSTCTRL, CM_L3_1_CLKSTCTRL,
- * CM_L3_2_CLKSTCTRL, CM_L4CFG_CLKSTCTRL, CM_MEMIF_CLKSTCTRL,
- * CM_SDMA_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_L4PER_CLKSTCTRL, CM_L4SEC_CLKSTCTRL,
- * CM_L3INIT_CLKSTCTRL, CM_CAM_CLKSTCTRL, CM_CEFUSE_CLKSTCTRL,
- * CM_L3INIT_CLKSTCTRL_RESTORE, CM_L3_1_CLKSTCTRL_RESTORE,
- * CM_L3_2_CLKSTCTRL_RESTORE, CM_L4CFG_CLKSTCTRL_RESTORE,
- * CM_L4PER_CLKSTCTRL_RESTORE, CM_MEMIF_CLKSTCTRL_RESTORE, CM_ALWON_CLKSTCTRL,
- * CM_IVAHD_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_TESLA_CLKSTCTRL,
- * CM1_ABE_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE
+ * Used by CM1_ABE_CLKSTCTRL, CM_ALWON_CLKSTCTRL, CM_CAM_CLKSTCTRL,
+ * CM_CEFUSE_CLKSTCTRL, CM_D2D_CLKSTCTRL, CM_DSS_CLKSTCTRL,
+ * CM_DUCATI_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_IVAHD_CLKSTCTRL,
+ * CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE, CM_L3INSTR_CLKSTCTRL,
+ * CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE, CM_L3_2_CLKSTCTRL,
+ * CM_L3_2_CLKSTCTRL_RESTORE, CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE,
+ * CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE, CM_L4SEC_CLKSTCTRL,
+ * CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE, CM_MPU_CLKSTCTRL,
+ * CM_MPU_CLKSTCTRL_RESTORE, CM_SDMA_CLKSTCTRL, CM_TESLA_CLKSTCTRL,
+ * CM_WKUP_CLKSTCTRL
  */
 #define OMAP4430_CLKTRCTRL_SHIFT				0
-#define OMAP4430_CLKTRCTRL_MASK					BITFIELD(0, 1)
+#define OMAP4430_CLKTRCTRL_MASK					(0x3 << 0)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_CORE */
 #define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT			0
-#define OMAP4430_CORE_DPLL_EMU_DIV_MASK				BITFIELD(0, 6)
+#define OMAP4430_CORE_DPLL_EMU_DIV_MASK				(0x7f << 0)
 
 /* Used by CM_EMU_OVERRIDE_DPLL_CORE */
 #define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT			8
-#define OMAP4430_CORE_DPLL_EMU_MULT_MASK			BITFIELD(8, 18)
+#define OMAP4430_CORE_DPLL_EMU_MULT_MASK			(0x7ff << 8)
+
+/* Used by REVISION_CM1, REVISION_CM2 */
+#define OMAP4430_CUSTOM_SHIFT					6
+#define OMAP4430_CUSTOM_MASK					(0x3 << 6)
 
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
+/*
+ * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP,
+ * CM_L4CFG_DYNAMICDEP_RESTORE
+ */
 #define OMAP4430_D2D_DYNDEP_SHIFT				18
-#define OMAP4430_D2D_DYNDEP_MASK				BITFIELD(18, 18)
+#define OMAP4430_D2D_DYNDEP_MASK				(1 << 18)
 
 /* Used by CM_MPU_STATICDEP */
 #define OMAP4430_D2D_STATDEP_SHIFT				18
-#define OMAP4430_D2D_STATDEP_MASK				BITFIELD(18, 18)
+#define OMAP4430_D2D_STATDEP_MASK				(1 << 18)
 
 /*
- * Used by CM_SSC_DELTAMSTEP_DPLL_PER, CM_SSC_DELTAMSTEP_DPLL_UNIPRO,
- * CM_SSC_DELTAMSTEP_DPLL_USB, CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE,
- * CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE,
- * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA,
- * CM_SSC_DELTAMSTEP_DPLL_MPU
+ * Used by CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE,
+ * CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE, CM_SSC_DELTAMSTEP_DPLL_DDRPHY,
+ * CM_SSC_DELTAMSTEP_DPLL_IVA, CM_SSC_DELTAMSTEP_DPLL_MPU,
+ * CM_SSC_DELTAMSTEP_DPLL_PER, CM_SSC_DELTAMSTEP_DPLL_UNIPRO,
+ * CM_SSC_DELTAMSTEP_DPLL_USB
  */
 #define OMAP4430_DELTAMSTEP_SHIFT				0
-#define OMAP4430_DELTAMSTEP_MASK				BITFIELD(0, 19)
+#define OMAP4430_DELTAMSTEP_MASK				(0xfffff << 0)
 
-/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */
 #define OMAP4430_DLL_OVERRIDE_SHIFT				2
-#define OMAP4430_DLL_OVERRIDE_MASK				BITFIELD(2, 2)
+#define OMAP4430_DLL_OVERRIDE_MASK				(1 << 2)
 
 /* Renamed from DLL_OVERRIDE Used by CM_DLL_CTRL */
 #define OMAP4430_DLL_OVERRIDE_0_0_SHIFT				0
-#define OMAP4430_DLL_OVERRIDE_0_0_MASK				BITFIELD(0, 0)
+#define OMAP4430_DLL_OVERRIDE_0_0_MASK				(1 << 0)
 
-/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */
 #define OMAP4430_DLL_RESET_SHIFT				3
-#define OMAP4430_DLL_RESET_MASK					BITFIELD(3, 3)
+#define OMAP4430_DLL_RESET_MASK					(1 << 3)
 
 /*
- * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB,
- * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
- * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
+ * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
+ * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA,
+ * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO,
+ * CM_CLKSEL_DPLL_USB
  */
 #define OMAP4430_DPLL_BYP_CLKSEL_SHIFT				23
-#define OMAP4430_DPLL_BYP_CLKSEL_MASK				BITFIELD(23, 23)
+#define OMAP4430_DPLL_BYP_CLKSEL_MASK				(1 << 23)
 
 /* Used by CM_CLKDCOLDO_DPLL_USB */
 #define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK			BITFIELD(8, 8)
+#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK			(1 << 8)
 
-/* Used by CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_CORE */
+/* Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_CORE_RESTORE */
 #define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT			20
-#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK			BITFIELD(20, 20)
+#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK			(1 << 20)
 
 /*
- * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
- * CM_DIV_M3_DPLL_CORE
+ * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE,
+ * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER
  */
 #define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT			0
-#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK			BITFIELD(0, 4)
+#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK			(0x1f << 0)
 
 /*
- * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
- * CM_DIV_M3_DPLL_CORE
+ * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE,
+ * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER
  */
 #define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT			5
-#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK			BITFIELD(5, 5)
+#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK			(1 << 5)
 
 /*
- * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
- * CM_DIV_M3_DPLL_CORE
+ * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE,
+ * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER
  */
 #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK			BITFIELD(8, 8)
+#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK			(1 << 8)
 
-/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */
+/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
 #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT			10
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK			BITFIELD(10, 10)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK			(1 << 10)
 
 /*
- * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO,
- * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
- * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU
+ * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
+ * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_CLKOUT_DIV_SHIFT				0
-#define OMAP4430_DPLL_CLKOUT_DIV_MASK				BITFIELD(0, 4)
+#define OMAP4430_DPLL_CLKOUT_DIV_MASK				(0x1f << 0)
 
 /* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */
 #define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT			0
-#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK			BITFIELD(0, 6)
+#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK			(0x7f << 0)
 
 /*
- * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO,
- * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
- * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU
+ * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
+ * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT			5
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK			BITFIELD(5, 5)
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK			(1 << 5)
 
 /* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */
 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT		7
-#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK		BITFIELD(7, 7)
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK		(1 << 7)
 
 /*
- * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE,
- * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU
+ * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
+ * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
  */
 #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK			BITFIELD(8, 8)
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK			(1 << 8)
 
-/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */
 #define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT			8
-#define OMAP4430_DPLL_CORE_DPLL_EN_MASK				BITFIELD(8, 10)
+#define OMAP4430_DPLL_CORE_DPLL_EN_MASK				(0x7 << 8)
 
-/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */
 #define OMAP4430_DPLL_CORE_M2_DIV_SHIFT				11
-#define OMAP4430_DPLL_CORE_M2_DIV_MASK				BITFIELD(11, 15)
+#define OMAP4430_DPLL_CORE_M2_DIV_MASK				(0x1f << 11)
 
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
+/* Used by CM_SHADOW_FREQ_CONFIG2, CM_SHADOW_FREQ_CONFIG2_RESTORE */
 #define OMAP4430_DPLL_CORE_M5_DIV_SHIFT				3
-#define OMAP4430_DPLL_CORE_M5_DIV_MASK				BITFIELD(3, 7)
-
-/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
-#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_SHIFT			1
-#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_MASK			BITFIELD(1, 1)
+#define OMAP4430_DPLL_CORE_M5_DIV_MASK				(0x1f << 3)
 
 /*
- * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO,
- * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
- * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
+ * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
+ * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA,
+ * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_DIV_SHIFT					0
-#define OMAP4430_DPLL_DIV_MASK					BITFIELD(0, 6)
+#define OMAP4430_DPLL_DIV_MASK					(0x7f << 0)
 
 /* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */
 #define OMAP4430_DPLL_DIV_0_7_SHIFT				0
-#define OMAP4430_DPLL_DIV_0_7_MASK				BITFIELD(0, 7)
+#define OMAP4430_DPLL_DIV_0_7_MASK				(0xff << 0)
 
 /*
- * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_USB,
- * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
- * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER
  */
 #define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT			8
-#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK			BITFIELD(8, 8)
+#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK			(1 << 8)
 
 /* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */
 #define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT			3
-#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK			BITFIELD(3, 3)
+#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK			(1 << 3)
 
 /*
- * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
- * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
- * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO,
+ * CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_EN_SHIFT					0
-#define OMAP4430_DPLL_EN_MASK					BITFIELD(0, 2)
+#define OMAP4430_DPLL_EN_MASK					(0x7 << 0)
 
 /*
- * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO,
- * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
- * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_LPMODE_EN_SHIFT				10
-#define OMAP4430_DPLL_LPMODE_EN_MASK				BITFIELD(10, 10)
+#define OMAP4430_DPLL_LPMODE_EN_MASK				(1 << 10)
 
 /*
- * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO,
- * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
- * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
+ * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
+ * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA,
+ * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_MULT_SHIFT				8
-#define OMAP4430_DPLL_MULT_MASK					BITFIELD(8, 18)
+#define OMAP4430_DPLL_MULT_MASK					(0x7ff << 8)
 
 /* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */
 #define OMAP4430_DPLL_MULT_USB_SHIFT				8
-#define OMAP4430_DPLL_MULT_USB_MASK				BITFIELD(8, 19)
+#define OMAP4430_DPLL_MULT_USB_MASK				(0xfff << 8)
 
 /*
- * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO,
- * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
- * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO
  */
 #define OMAP4430_DPLL_REGM4XEN_SHIFT				11
-#define OMAP4430_DPLL_REGM4XEN_MASK				BITFIELD(11, 11)
+#define OMAP4430_DPLL_REGM4XEN_MASK				(1 << 11)
 
 /* Used by CM_CLKSEL_DPLL_USB */
 #define OMAP4430_DPLL_SD_DIV_SHIFT				24
-#define OMAP4430_DPLL_SD_DIV_MASK				BITFIELD(24, 31)
+#define OMAP4430_DPLL_SD_DIV_MASK				(0xff << 24)
 
 /*
- * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
- * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
- * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO,
+ * CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_SSC_ACK_SHIFT				13
-#define OMAP4430_DPLL_SSC_ACK_MASK				BITFIELD(13, 13)
+#define OMAP4430_DPLL_SSC_ACK_MASK				(1 << 13)
 
 /*
- * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
- * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
- * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO,
+ * CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT			14
-#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK			BITFIELD(14, 14)
+#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK			(1 << 14)
 
 /*
- * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
- * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
- * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA,
+ * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO,
+ * CM_CLKMODE_DPLL_USB
  */
 #define OMAP4430_DPLL_SSC_EN_SHIFT				12
-#define OMAP4430_DPLL_SSC_EN_MASK				BITFIELD(12, 12)
+#define OMAP4430_DPLL_SSC_EN_MASK				(1 << 12)
 
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
+/*
+ * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP,
+ * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP, CM_L4PER_DYNAMICDEP_RESTORE
+ */
 #define OMAP4430_DSS_DYNDEP_SHIFT				8
-#define OMAP4430_DSS_DYNDEP_MASK				BITFIELD(8, 8)
+#define OMAP4430_DSS_DYNDEP_MASK				(1 << 8)
 
 /*
- * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
- * CM_MPU_STATICDEP
+ * Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE
  */
 #define OMAP4430_DSS_STATDEP_SHIFT				8
-#define OMAP4430_DSS_STATDEP_MASK				BITFIELD(8, 8)
+#define OMAP4430_DSS_STATDEP_MASK				(1 << 8)
 
-/* Used by CM_L3_2_DYNAMICDEP */
+/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE */
 #define OMAP4430_DUCATI_DYNDEP_SHIFT				0
-#define OMAP4430_DUCATI_DYNDEP_MASK				BITFIELD(0, 0)
+#define OMAP4430_DUCATI_DYNDEP_MASK				(1 << 0)
 
-/* Used by CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP */
+/* Used by CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE */
 #define OMAP4430_DUCATI_STATDEP_SHIFT				0
-#define OMAP4430_DUCATI_STATDEP_MASK				BITFIELD(0, 0)
+#define OMAP4430_DUCATI_STATDEP_MASK				(1 << 0)
 
-/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */
 #define OMAP4430_FREQ_UPDATE_SHIFT				0
-#define OMAP4430_FREQ_UPDATE_MASK				BITFIELD(0, 0)
+#define OMAP4430_FREQ_UPDATE_MASK				(1 << 0)
+
+/* Used by REVISION_CM1, REVISION_CM2 */
+#define OMAP4430_FUNC_SHIFT					16
+#define OMAP4430_FUNC_MASK					(0xfff << 16)
 
-/* Used by CM_L3_2_DYNAMICDEP */
+/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE */
 #define OMAP4430_GFX_DYNDEP_SHIFT				10
-#define OMAP4430_GFX_DYNDEP_MASK				BITFIELD(10, 10)
+#define OMAP4430_GFX_DYNDEP_MASK				(1 << 10)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_GFX_STATDEP_SHIFT				10
-#define OMAP4430_GFX_STATDEP_MASK				BITFIELD(10, 10)
+#define OMAP4430_GFX_STATDEP_MASK				(1 << 10)
 
-/* Used by CM_SHADOW_FREQ_CONFIG2 */
+/* Used by CM_SHADOW_FREQ_CONFIG2, CM_SHADOW_FREQ_CONFIG2_RESTORE */
 #define OMAP4430_GPMC_FREQ_UPDATE_SHIFT				0
-#define OMAP4430_GPMC_FREQ_UPDATE_MASK				BITFIELD(0, 0)
+#define OMAP4430_GPMC_FREQ_UPDATE_MASK				(1 << 0)
 
 /*
- * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
- * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK			BITFIELD(0, 4)
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK			(0x1f << 0)
 
 /*
- * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
- * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		BITFIELD(5, 5)
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		(1 << 5)
 
 /*
- * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
- * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		BITFIELD(8, 8)
+#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		(1 << 8)
 
 /*
- * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
- * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK			BITFIELD(12, 12)
+#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK			(1 << 12)
 
 /*
- * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
- * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK			BITFIELD(0, 4)
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK			(0x1f << 0)
 
 /*
- * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
- * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		BITFIELD(5, 5)
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		(1 << 5)
 
 /*
- * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
- * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		BITFIELD(8, 8)
+#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		(1 << 8)
 
 /*
- * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
- * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK			BITFIELD(12, 12)
+#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK			(1 << 12)
 
 /*
- * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
- * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK			BITFIELD(0, 4)
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK			(0x1f << 0)
 
 /*
- * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
- * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		BITFIELD(5, 5)
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		(1 << 5)
 
 /*
- * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
- * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		BITFIELD(8, 8)
+#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		(1 << 8)
 
 /*
- * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
- * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK			BITFIELD(12, 12)
+#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK			(1 << 12)
 
 /*
- * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
- * CM_DIV_M7_DPLL_CORE
+ * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT			0
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK			BITFIELD(0, 4)
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK			(0x1f << 0)
 
 /*
- * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
- * CM_DIV_M7_DPLL_CORE
+ * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT		5
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK		BITFIELD(5, 5)
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK		(1 << 5)
 
 /*
- * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
- * CM_DIV_M7_DPLL_CORE
+ * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT		8
-#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK		BITFIELD(8, 8)
+#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK		(1 << 8)
 
 /*
- * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
- * CM_DIV_M7_DPLL_CORE
+ * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_PER
  */
 #define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT			12
-#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK			BITFIELD(12, 12)
-
-/*
- * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL,
- * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL,
- * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL,
- * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL,
- * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL,
- * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
- * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
- * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
- * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
- * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
- * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
- * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL,
- * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
- * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
- * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
- * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
- * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
- * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL,
- * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL,
- * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL,
- * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
- * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
- * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL,
- * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL,
- * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL,
- * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL,
- * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL,
- * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL,
- * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK			(1 << 12)
+
+/*
+ * Used by CM1_ABE_AESS_CLKCTRL, CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL,
+ * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
+ * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
+ * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
+ * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL,
+ * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL,
+ * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
+ * CM_CM1_PROFILING_CLKCTRL, CM_CM1_PROFILING_CLKCTRL_RESTORE,
+ * CM_CM2_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL_RESTORE,
+ * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL,
+ * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
+ * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
  * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
  * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
  * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
  * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
- * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
- * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
- * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
- * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE,
- * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE,
- * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
- * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
- * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE,
- * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL,
- * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL,
- * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
- * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL,
- * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL,
- * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL,
- * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL,
- * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL,
- * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL
+ * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_HOST_FS_CLKCTRL,
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
+ * CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, CM_L3INIT_XHPI_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL_RESTORE,
+ * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE,
+ * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL,
+ * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL,
+ * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL,
+ * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
+ * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
+ * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
+ * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL_RESTORE,
+ * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL,
+ * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
+ * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
+ * CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL,
+ * CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL,
+ * CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
+ * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL,
+ * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL,
+ * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
+ * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
+ * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
+ * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
+ * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
+ * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL,
+ * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL,
+ * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
  */
 #define OMAP4430_IDLEST_SHIFT					16
-#define OMAP4430_IDLEST_MASK					BITFIELD(16, 17)
+#define OMAP4430_IDLEST_MASK					(0x3 << 16)
 
-/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
+/*
+ * Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP,
+ * CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE
+ */
 #define OMAP4430_ISS_DYNDEP_SHIFT				9
-#define OMAP4430_ISS_DYNDEP_MASK				BITFIELD(9, 9)
+#define OMAP4430_ISS_DYNDEP_MASK				(1 << 9)
 
 /*
- * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
- * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ * Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP
  */
 #define OMAP4430_ISS_STATDEP_SHIFT				9
-#define OMAP4430_ISS_STATDEP_MASK				BITFIELD(9, 9)
+#define OMAP4430_ISS_STATDEP_MASK				(1 << 9)
 
-/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
+/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_TESLA_DYNAMICDEP */
 #define OMAP4430_IVAHD_DYNDEP_SHIFT				2
-#define OMAP4430_IVAHD_DYNDEP_MASK				BITFIELD(2, 2)
+#define OMAP4430_IVAHD_DYNDEP_MASK				(1 << 2)
 
 /*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
- * CM_GFX_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
- * CM_SDMA_STATICDEP_RESTORE, CM_DSS_STATICDEP, CM_MPU_STATICDEP,
- * CM_TESLA_STATICDEP
+ * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE,
+ * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP,
+ * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP
  */
 #define OMAP4430_IVAHD_STATDEP_SHIFT				2
-#define OMAP4430_IVAHD_STATDEP_MASK				BITFIELD(2, 2)
+#define OMAP4430_IVAHD_STATDEP_MASK				(1 << 2)
 
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
+/*
+ * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP,
+ * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP, CM_L4PER_DYNAMICDEP_RESTORE
+ */
 #define OMAP4430_L3INIT_DYNDEP_SHIFT				7
-#define OMAP4430_L3INIT_DYNDEP_MASK				BITFIELD(7, 7)
+#define OMAP4430_L3INIT_DYNDEP_MASK				(1 << 7)
 
 /*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
- * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP,
+ * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
+ * CM_TESLA_STATICDEP
  */
 #define OMAP4430_L3INIT_STATDEP_SHIFT				7
-#define OMAP4430_L3INIT_STATDEP_MASK				BITFIELD(7, 7)
+#define OMAP4430_L3INIT_STATDEP_MASK				(1 << 7)
 
 /*
- * Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
- * CM_DSS_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
+ * Used by CM_DSS_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3_2_DYNAMICDEP,
+ * CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP,
+ * CM_L4CFG_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
  */
 #define OMAP4430_L3_1_DYNDEP_SHIFT				5
-#define OMAP4430_L3_1_DYNDEP_MASK				BITFIELD(5, 5)
+#define OMAP4430_L3_1_DYNDEP_MASK				(1 << 5)
 
 /*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
- * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
- * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
- * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE,
+ * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
+ * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
+ * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L3_1_STATDEP_SHIFT				5
-#define OMAP4430_L3_1_STATDEP_MASK				BITFIELD(5, 5)
+#define OMAP4430_L3_1_STATDEP_MASK				(1 << 5)
 
 /*
- * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP,
- * CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_SDMA_DYNAMICDEP,
- * CM_GFX_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
- * CM_CAM_DYNAMICDEP, CM_IVAHD_DYNAMICDEP
+ * Used by CM_CAM_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_D2D_DYNAMICDEP_RESTORE,
+ * CM_DUCATI_DYNAMICDEP, CM_EMU_DYNAMICDEP, CM_GFX_DYNAMICDEP,
+ * CM_IVAHD_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3_1_DYNAMICDEP,
+ * CM_L3_1_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP,
+ * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4SEC_DYNAMICDEP, CM_SDMA_DYNAMICDEP
  */
 #define OMAP4430_L3_2_DYNDEP_SHIFT				6
-#define OMAP4430_L3_2_DYNDEP_MASK				BITFIELD(6, 6)
+#define OMAP4430_L3_2_DYNDEP_MASK				(1 << 6)
 
 /*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
- * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
- * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
- * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE,
+ * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
+ * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
+ * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L3_2_STATDEP_SHIFT				6
-#define OMAP4430_L3_2_STATDEP_MASK				BITFIELD(6, 6)
+#define OMAP4430_L3_2_STATDEP_MASK				(1 << 6)
 
-/* Used by CM_L3_1_DYNAMICDEP */
+/* Used by CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE */
 #define OMAP4430_L4CFG_DYNDEP_SHIFT				12
-#define OMAP4430_L4CFG_DYNDEP_MASK				BITFIELD(12, 12)
+#define OMAP4430_L4CFG_DYNDEP_MASK				(1 << 12)
 
 /*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
- * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP,
- * CM_TESLA_STATICDEP
+ * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP,
+ * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L4CFG_STATDEP_SHIFT				12
-#define OMAP4430_L4CFG_STATDEP_MASK				BITFIELD(12, 12)
+#define OMAP4430_L4CFG_STATDEP_MASK				(1 << 12)
 
-/* Used by CM_L3_2_DYNAMICDEP */
+/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE */
 #define OMAP4430_L4PER_DYNDEP_SHIFT				13
-#define OMAP4430_L4PER_DYNDEP_MASK				BITFIELD(13, 13)
+#define OMAP4430_L4PER_DYNDEP_MASK				(1 << 13)
 
 /*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
- * CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
- * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP,
+ * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
+ * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L4PER_STATDEP_SHIFT				13
-#define OMAP4430_L4PER_STATDEP_MASK				BITFIELD(13, 13)
+#define OMAP4430_L4PER_STATDEP_MASK				(1 << 13)
 
-/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
+/*
+ * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP,
+ * CM_L4PER_DYNAMICDEP_RESTORE
+ */
 #define OMAP4430_L4SEC_DYNDEP_SHIFT				14
-#define OMAP4430_L4SEC_DYNDEP_MASK				BITFIELD(14, 14)
+#define OMAP4430_L4SEC_DYNDEP_MASK				(1 << 14)
 
 /*
- * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP
+ * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP,
+ * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE
  */
 #define OMAP4430_L4SEC_STATDEP_SHIFT				14
-#define OMAP4430_L4SEC_STATDEP_MASK				BITFIELD(14, 14)
+#define OMAP4430_L4SEC_STATDEP_MASK				(1 << 14)
 
-/* Used by CM_L4CFG_DYNAMICDEP */
+/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */
 #define OMAP4430_L4WKUP_DYNDEP_SHIFT				15
-#define OMAP4430_L4WKUP_DYNDEP_MASK				BITFIELD(15, 15)
+#define OMAP4430_L4WKUP_DYNDEP_MASK				(1 << 15)
 
 /*
- * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP,
- * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP,
+ * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP
  */
 #define OMAP4430_L4WKUP_STATDEP_SHIFT				15
-#define OMAP4430_L4WKUP_STATDEP_MASK				BITFIELD(15, 15)
+#define OMAP4430_L4WKUP_STATDEP_MASK				(1 << 15)
 
 /*
- * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_MPU_DYNAMICDEP
+ * Used by CM_D2D_DYNAMICDEP, CM_D2D_DYNAMICDEP_RESTORE, CM_L3_1_DYNAMICDEP,
+ * CM_L3_1_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP,
+ * CM_L4CFG_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP
  */
 #define OMAP4430_MEMIF_DYNDEP_SHIFT				4
-#define OMAP4430_MEMIF_DYNDEP_MASK				BITFIELD(4, 4)
+#define OMAP4430_MEMIF_DYNDEP_MASK				(1 << 4)
 
 /*
- * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
- * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
- * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
- * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE,
+ * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP,
+ * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP,
+ * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP
  */
 #define OMAP4430_MEMIF_STATDEP_SHIFT				4
-#define OMAP4430_MEMIF_STATDEP_MASK				BITFIELD(4, 4)
+#define OMAP4430_MEMIF_STATDEP_MASK				(1 << 4)
 
 /*
- * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO,
- * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE,
- * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
- * CM_SSC_MODFREQDIV_DPLL_MPU
+ * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
+ * CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, CM_SSC_MODFREQDIV_DPLL_DDRPHY,
+ * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU,
+ * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO,
+ * CM_SSC_MODFREQDIV_DPLL_USB
  */
 #define OMAP4430_MODFREQDIV_EXPONENT_SHIFT			8
-#define OMAP4430_MODFREQDIV_EXPONENT_MASK			BITFIELD(8, 10)
+#define OMAP4430_MODFREQDIV_EXPONENT_MASK			(0x7 << 8)
 
 /*
- * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO,
- * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE,
- * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
- * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
- * CM_SSC_MODFREQDIV_DPLL_MPU
+ * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
+ * CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, CM_SSC_MODFREQDIV_DPLL_DDRPHY,
+ * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU,
+ * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO,
+ * CM_SSC_MODFREQDIV_DPLL_USB
  */
 #define OMAP4430_MODFREQDIV_MANTISSA_SHIFT			0
-#define OMAP4430_MODFREQDIV_MANTISSA_MASK			BITFIELD(0, 6)
-
-/*
- * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL,
- * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL,
- * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL,
- * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL,
- * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL,
- * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
- * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
- * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
- * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
- * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
- * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
- * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
- * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL,
- * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
- * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
- * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
- * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
- * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
- * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL,
- * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL,
- * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL,
- * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
- * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
- * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL,
- * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL,
- * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL,
- * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL,
- * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL,
- * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL,
- * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+#define OMAP4430_MODFREQDIV_MANTISSA_MASK			(0x7f << 0)
+
+/*
+ * Used by CM1_ABE_AESS_CLKCTRL, CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL,
+ * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
+ * CM1_ABE_MCBSP3_CLKCTRL, CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL,
+ * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
+ * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL,
+ * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL,
+ * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
+ * CM_CM1_PROFILING_CLKCTRL, CM_CM1_PROFILING_CLKCTRL_RESTORE,
+ * CM_CM2_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL_RESTORE,
+ * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL,
+ * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL,
+ * CM_IVAHD_SL2_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
  * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
  * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
  * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
  * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
- * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
- * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
- * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
- * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE,
- * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE,
- * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
- * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
- * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE,
- * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL,
- * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL,
- * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
- * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL,
- * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL,
- * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL,
- * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL,
- * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL,
- * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL
+ * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_HOST_FS_CLKCTRL,
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
+ * CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, CM_L3INIT_XHPI_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL_RESTORE,
+ * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE,
+ * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL,
+ * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL,
+ * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL,
+ * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL,
+ * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL,
+ * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL,
+ * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL_RESTORE,
+ * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL,
+ * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL,
+ * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL,
+ * CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL,
+ * CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL,
+ * CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL,
+ * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL,
+ * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL,
+ * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL,
+ * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL,
+ * CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, CM_L4SEC_SHA2MD51_CLKCTRL,
+ * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
+ * CM_MEMIF_EMIF_H2_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL,
+ * CM_TESLA_TESLA_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, CM_WKUP_KEYBOARD_CLKCTRL,
+ * CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, CM_WKUP_SARRAM_CLKCTRL,
+ * CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, CM_WKUP_TIMER1_CLKCTRL,
+ * CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, CM_WKUP_WDT2_CLKCTRL
  */
 #define OMAP4430_MODULEMODE_SHIFT				0
-#define OMAP4430_MODULEMODE_MASK				BITFIELD(0, 1)
+#define OMAP4430_MODULEMODE_MASK				(0x3 << 0)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK			(1 << 9)
 
 /* Used by CM_WKUP_BANDGAP_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT			8
-#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK			BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK			(1 << 8)
 
-/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
-#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				9
-#define OMAP4430_OPTFCLKEN_CLK32K_MASK				BITFIELD(9, 9)
+/* Used by CM_ALWON_USBPHY_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				8
+#define OMAP4430_OPTFCLKEN_CLK32K_MASK				(1 << 8)
 
 /* Used by CM_CAM_ISS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK				BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK				(1 << 8)
 
 /*
- * Used by CM_WKUP_GPIO1_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
- * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
- * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
- * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
- * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE
+ * Used by CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL_RESTORE, CM_WKUP_GPIO1_CLKCTRL
  */
 #define OMAP4430_OPTFCLKEN_DBCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_DBCLK_MASK				BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_DBCLK_MASK				(1 << 8)
 
 /* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK				BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK				(1 << 8)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_DSSCLK_MASK				BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_DSSCLK_MASK				(1 << 8)
+
+/* Used by CM_WKUP_USIM_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_FCLK_SHIFT				8
+#define OMAP4430_OPTFCLKEN_FCLK_MASK				(1 << 8)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK0_SHIFT				8
-#define OMAP4430_OPTFCLKEN_FCLK0_MASK				BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_FCLK0_MASK				(1 << 8)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK1_SHIFT				9
-#define OMAP4430_OPTFCLKEN_FCLK1_MASK				BITFIELD(9, 9)
+#define OMAP4430_OPTFCLKEN_FCLK1_MASK				(1 << 9)
 
 /* Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_FCLK2_SHIFT				10
-#define OMAP4430_OPTFCLKEN_FCLK2_MASK				BITFIELD(10, 10)
+#define OMAP4430_OPTFCLKEN_FCLK2_MASK				(1 << 10)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
 #define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT			15
-#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK			BITFIELD(15, 15)
+#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK			(1 << 15)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
 #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT		13
-#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK			BITFIELD(13, 13)
+#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK			(1 << 13)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
 #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT		14
-#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK			BITFIELD(14, 14)
+#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK			(1 << 14)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
 #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT			11
-#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK			BITFIELD(11, 11)
+#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK			(1 << 11)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
 #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT			12
-#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK			BITFIELD(12, 12)
+#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK			(1 << 12)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK			(1 << 8)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT		9
-#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT			8
-#define OMAP4430_OPTFCLKEN_PHY_48M_MASK				BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_PHY_48M_MASK				(1 << 8)
 
 /* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK			BITFIELD(10, 10)
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK			(1 << 10)
 
 /* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT		11
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK		BITFIELD(11, 11)
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK		(1 << 11)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK				BITFIELD(10, 10)
+#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK				(1 << 10)
 
 /* Used by CM_DSS_DSS_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT				11
-#define OMAP4430_OPTFCLKEN_TV_CLK_MASK				BITFIELD(11, 11)
+#define OMAP4430_OPTFCLKEN_TV_CLK_MASK				(1 << 11)
 
 /* Used by CM_L3INIT_UNIPRO1_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
 #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
 #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
 #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK			BITFIELD(10, 10)
+#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK			(1 << 10)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
 #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK			BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK			(1 << 8)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
 #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK			BITFIELD(9, 9)
+#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK			(1 << 9)
 
 /* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
 #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK			BITFIELD(10, 10)
+#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK			(1 << 10)
 
 /* Used by CM_L3INIT_USB_OTG_CLKCTRL */
 #define OMAP4430_OPTFCLKEN_XCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_XCLK_MASK				BITFIELD(8, 8)
+#define OMAP4430_OPTFCLKEN_XCLK_MASK				(1 << 8)
 
-/* Used by CM_EMU_OVERRIDE_DPLL_PER, CM_EMU_OVERRIDE_DPLL_CORE */
+/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
 #define OMAP4430_OVERRIDE_ENABLE_SHIFT				19
-#define OMAP4430_OVERRIDE_ENABLE_MASK				BITFIELD(19, 19)
+#define OMAP4430_OVERRIDE_ENABLE_MASK				(1 << 19)
 
 /* Used by CM_CLKSEL_ABE */
 #define OMAP4430_PAD_CLKS_GATE_SHIFT				8
-#define OMAP4430_PAD_CLKS_GATE_MASK				BITFIELD(8, 8)
+#define OMAP4430_PAD_CLKS_GATE_MASK				(1 << 8)
 
 /* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */
 #define OMAP4430_PERF_CURRENT_SHIFT				0
-#define OMAP4430_PERF_CURRENT_MASK				BITFIELD(0, 7)
+#define OMAP4430_PERF_CURRENT_MASK				(0xff << 0)
 
 /*
  * Used by CM_CORE_DVFS_PERF1, CM_CORE_DVFS_PERF2, CM_CORE_DVFS_PERF3,
@@ -1316,159 +1355,173 @@
  * CM_IVA_DVFS_PERF_TESLA
  */
 #define OMAP4430_PERF_REQ_SHIFT					0
-#define OMAP4430_PERF_REQ_MASK					BITFIELD(0, 7)
-
-/* Used by CM_EMU_OVERRIDE_DPLL_PER */
-#define OMAP4430_PER_DPLL_EMU_DIV_SHIFT				0
-#define OMAP4430_PER_DPLL_EMU_DIV_MASK				BITFIELD(0, 6)
-
-/* Used by CM_EMU_OVERRIDE_DPLL_PER */
-#define OMAP4430_PER_DPLL_EMU_MULT_SHIFT			8
-#define OMAP4430_PER_DPLL_EMU_MULT_MASK				BITFIELD(8, 18)
+#define OMAP4430_PERF_REQ_MASK					(0xff << 0)
 
 /* Used by CM_RESTORE_ST */
 #define OMAP4430_PHASE1_COMPLETED_SHIFT				0
-#define OMAP4430_PHASE1_COMPLETED_MASK				BITFIELD(0, 0)
+#define OMAP4430_PHASE1_COMPLETED_MASK				(1 << 0)
 
 /* Used by CM_RESTORE_ST */
 #define OMAP4430_PHASE2A_COMPLETED_SHIFT			1
-#define OMAP4430_PHASE2A_COMPLETED_MASK				BITFIELD(1, 1)
+#define OMAP4430_PHASE2A_COMPLETED_MASK				(1 << 1)
 
 /* Used by CM_RESTORE_ST */
 #define OMAP4430_PHASE2B_COMPLETED_SHIFT			2
-#define OMAP4430_PHASE2B_COMPLETED_MASK				BITFIELD(2, 2)
+#define OMAP4430_PHASE2B_COMPLETED_MASK				(1 << 2)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_PMD_STM_MUX_CTRL_SHIFT				20
-#define OMAP4430_PMD_STM_MUX_CTRL_MASK				BITFIELD(20, 21)
+#define OMAP4430_PMD_STM_MUX_CTRL_MASK				(0x3 << 20)
 
 /* Used by CM_EMU_DEBUGSS_CLKCTRL */
 #define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT			22
-#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK			BITFIELD(22, 23)
+#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK			(0x3 << 22)
 
-/* Used by CM_DYN_DEP_PRESCAL */
+/* Used by CM_DYN_DEP_PRESCAL, CM_DYN_DEP_PRESCAL_RESTORE */
 #define OMAP4430_PRESCAL_SHIFT					0
-#define OMAP4430_PRESCAL_MASK					BITFIELD(0, 5)
+#define OMAP4430_PRESCAL_MASK					(0x3f << 0)
 
-/* Used by REVISION_CM2, REVISION_CM1 */
-#define OMAP4430_REV_SHIFT					0
-#define OMAP4430_REV_MASK					BITFIELD(0, 7)
+/* Used by REVISION_CM1, REVISION_CM2 */
+#define OMAP4430_R_RTL_SHIFT					11
+#define OMAP4430_R_RTL_MASK					(0x1f << 11)
 
 /*
- * Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
- * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE
+ * Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE,
+ * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE
  */
 #define OMAP4430_SAR_MODE_SHIFT					4
-#define OMAP4430_SAR_MODE_MASK					BITFIELD(4, 4)
+#define OMAP4430_SAR_MODE_MASK					(1 << 4)
 
 /* Used by CM_SCALE_FCLK */
 #define OMAP4430_SCALE_FCLK_SHIFT				0
-#define OMAP4430_SCALE_FCLK_MASK				BITFIELD(0, 0)
+#define OMAP4430_SCALE_FCLK_MASK				(1 << 0)
+
+/* Used by REVISION_CM1, REVISION_CM2 */
+#define OMAP4430_SCHEME_SHIFT					30
+#define OMAP4430_SCHEME_MASK					(0x3 << 30)
 
-/* Used by CM_L4CFG_DYNAMICDEP */
+/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */
 #define OMAP4430_SDMA_DYNDEP_SHIFT				11
-#define OMAP4430_SDMA_DYNDEP_MASK				BITFIELD(11, 11)
+#define OMAP4430_SDMA_DYNDEP_MASK				(1 << 11)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_SDMA_STATDEP_SHIFT				11
-#define OMAP4430_SDMA_STATDEP_MASK				BITFIELD(11, 11)
+#define OMAP4430_SDMA_STATDEP_MASK				(1 << 11)
 
 /* Used by CM_CLKSEL_ABE */
 #define OMAP4430_SLIMBUS_CLK_GATE_SHIFT				10
-#define OMAP4430_SLIMBUS_CLK_GATE_MASK				BITFIELD(10, 10)
+#define OMAP4430_SLIMBUS_CLK_GATE_MASK				(1 << 10)
 
 /*
- * Used by CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
- * CM_DUCATI_DUCATI_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL,
- * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+ * Used by CM1_ABE_AESS_CLKCTRL, CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL,
+ * CM_D2D_SAD2D_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL,
+ * CM_DUCATI_DUCATI_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL,
+ * CM_IVAHD_IVAHD_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
  * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
  * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
  * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
- * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
- * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
- * CM_CAM_ISS_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE,
- * CM_IVAHD_IVAHD_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL,
- * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL
+ * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE,
+ * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
+ * CM_L3INIT_XHPI_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL,
+ * CM_SDMA_SDMA_CLKCTRL, CM_TESLA_TESLA_CLKCTRL
  */
 #define OMAP4430_STBYST_SHIFT					18
-#define OMAP4430_STBYST_MASK					BITFIELD(18, 18)
+#define OMAP4430_STBYST_MASK					(1 << 18)
 
 /*
- * Used by CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB,
- * CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
- * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU
+ * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
+ * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER,
+ * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
  */
 #define OMAP4430_ST_DPLL_CLK_SHIFT				0
-#define OMAP4430_ST_DPLL_CLK_MASK				BITFIELD(0, 0)
+#define OMAP4430_ST_DPLL_CLK_MASK				(1 << 0)
 
 /* Used by CM_CLKDCOLDO_DPLL_USB */
 #define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT			9
-#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK				BITFIELD(9, 9)
+#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK				(1 << 9)
 
 /*
- * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE,
- * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
- * CM_DIV_M2_DPLL_MPU
+ * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
+ * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU,
+ * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB
  */
 #define OMAP4430_ST_DPLL_CLKOUT_SHIFT				9
-#define OMAP4430_ST_DPLL_CLKOUT_MASK				BITFIELD(9, 9)
+#define OMAP4430_ST_DPLL_CLKOUT_MASK				(1 << 9)
 
 /*
- * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
- * CM_DIV_M3_DPLL_CORE
+ * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE,
+ * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER
  */
 #define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT			9
-#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK				BITFIELD(9, 9)
+#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK				(1 << 9)
 
-/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */
+/* Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */
 #define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT				11
-#define OMAP4430_ST_DPLL_CLKOUTX2_MASK				BITFIELD(11, 11)
+#define OMAP4430_ST_DPLL_CLKOUTX2_MASK				(1 << 11)
 
 /*
- * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
- * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER
  */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK			BITFIELD(9, 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK			(1 << 9)
 
 /*
- * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
- * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER
  */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK			BITFIELD(9, 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK			(1 << 9)
 
 /*
- * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
- * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER
  */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK			BITFIELD(9, 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK			(1 << 9)
 
 /*
- * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
- * CM_DIV_M7_DPLL_CORE
+ * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_PER
  */
 #define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT			9
-#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK			BITFIELD(9, 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK			(1 << 9)
+
+/*
+ * Used by CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
+ * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU, CM_IDLEST_DPLL_PER,
+ * CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB
+ */
+#define OMAP4430_ST_MN_BYPASS_SHIFT				8
+#define OMAP4430_ST_MN_BYPASS_MASK				(1 << 8)
 
 /* Used by CM_SYS_CLKSEL */
 #define OMAP4430_SYS_CLKSEL_SHIFT				0
-#define OMAP4430_SYS_CLKSEL_MASK				BITFIELD(0, 2)
+#define OMAP4430_SYS_CLKSEL_MASK				(0x7 << 0)
 
-/* Used by CM_L4CFG_DYNAMICDEP */
+/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */
 #define OMAP4430_TESLA_DYNDEP_SHIFT				1
-#define OMAP4430_TESLA_DYNDEP_MASK				BITFIELD(1, 1)
+#define OMAP4430_TESLA_DYNDEP_MASK				(1 << 1)
 
 /* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
 #define OMAP4430_TESLA_STATDEP_SHIFT				1
-#define OMAP4430_TESLA_STATDEP_MASK				BITFIELD(1, 1)
+#define OMAP4430_TESLA_STATDEP_MASK				(1 << 1)
 
 /*
- * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP,
- * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
- * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
+ * Used by CM_D2D_DYNAMICDEP, CM_D2D_DYNAMICDEP_RESTORE, CM_DUCATI_DYNAMICDEP,
+ * CM_EMU_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE,
+ * CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP,
+ * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP,
+ * CM_L4PER_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
  */
 #define OMAP4430_WINDOWSIZE_SHIFT				24
-#define OMAP4430_WINDOWSIZE_MASK				BITFIELD(24, 27)
+#define OMAP4430_WINDOWSIZE_MASK				(0xf << 24)
+
+/* Used by REVISION_CM1, REVISION_CM2 */
+#define OMAP4430_X_MAJOR_SHIFT					8
+#define OMAP4430_X_MAJOR_MASK					(0x7 << 8)
+
+/* Used by REVISION_CM1, REVISION_CM2 */
+#define OMAP4430_Y_MINOR_SHIFT					0
+#define OMAP4430_Y_MINOR_MASK					(0x3f << 0)
 #endif
diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c
index 2d83565d2be2..721c3b66740a 100644
--- a/arch/arm/mach-omap2/cm.c
+++ b/arch/arm/mach-omap2/cm.c
@@ -50,15 +50,15 @@ int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
 
 	cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
 
+	mask = 1 << idlest_shift;
+
 	if (cpu_is_omap24xx())
-		ena = idlest_shift;
+		ena = mask;
 	else if (cpu_is_omap34xx())
 		ena = 0;
 	else
 		BUG();
 
-	mask = 1 << idlest_shift;
-
 	/* XXX should be OMAP2 CM */
 	omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
 			  MAX_MODULE_READY_TIME, i);
diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
index 336d94889e5b..3c35a87cb90c 100644
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -195,6 +195,42 @@
 #define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET		0x0088
 #define OMAP4430_CM1_ABE_WDT3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088)
 
+/* CM1.RESTORE_CM1 register offsets */
+#define OMAP4_CM_CLKSEL_CORE_RESTORE_OFFSET		0x0000
+#define OMAP4430_CM_CLKSEL_CORE_RESTORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000)
+#define OMAP4_CM_DIV_M2_DPLL_CORE_RESTORE_OFFSET	0x0004
+#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004)
+#define OMAP4_CM_DIV_M3_DPLL_CORE_RESTORE_OFFSET	0x0008
+#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008)
+#define OMAP4_CM_DIV_M4_DPLL_CORE_RESTORE_OFFSET	0x000c
+#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c)
+#define OMAP4_CM_DIV_M5_DPLL_CORE_RESTORE_OFFSET	0x0010
+#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010)
+#define OMAP4_CM_DIV_M6_DPLL_CORE_RESTORE_OFFSET	0x0014
+#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014)
+#define OMAP4_CM_DIV_M7_DPLL_CORE_RESTORE_OFFSET	0x0018
+#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018)
+#define OMAP4_CM_CLKSEL_DPLL_CORE_RESTORE_OFFSET	0x001c
+#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE_OFFSET	0x0020
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE_OFFSET	0x0024
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024)
+#define OMAP4_CM_CLKMODE_DPLL_CORE_RESTORE_OFFSET	0x0028
+#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG2_RESTORE_OFFSET	0x002c
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG2_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG1_RESTORE_OFFSET	0x0030
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030)
+#define OMAP4_CM_AUTOIDLE_DPLL_CORE_RESTORE_OFFSET	0x0034
+#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034)
+#define OMAP4_CM_MPU_CLKSTCTRL_RESTORE_OFFSET		0x0038
+#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0038)
+#define OMAP4_CM_CM1_PROFILING_CLKCTRL_RESTORE_OFFSET	0x003c
+#define OMAP4430_CM_CM1_PROFILING_CLKCTRL_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x003c)
+#define OMAP4_CM_DYN_DEP_PRESCAL_RESTORE_OFFSET		0x0040
+#define OMAP4430_CM_DYN_DEP_PRESCAL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0040)
+
 /* CM2 */
 
 /* CM2.OCP_SOCKET_CM2 register offsets */
@@ -252,8 +288,6 @@
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068)
 #define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x006c
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c)
-#define OMAP4_CM_EMU_OVERRIDE_DPLL_PER_OFFSET		0x0070
-#define OMAP4430_CM_EMU_OVERRIDE_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0070)
 #define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET		0x0080
 #define OMAP4430_CM_CLKMODE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080)
 #define OMAP4_CM_IDLEST_DPLL_USB_OFFSET			0x0084
@@ -296,6 +330,8 @@
 #define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030)
 #define OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET		0x0038
 #define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038)
+#define OMAP4_CM_ALWON_USBPHY_CLKCTRL_OFFSET		0x0040
+#define OMAP4430_CM_ALWON_USBPHY_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0040)
 
 /* CM2.CORE_CM2 register offsets */
 #define OMAP4_CM_L3_1_CLKSTCTRL_OFFSET			0x0000
@@ -578,4 +614,54 @@
 #define OMAP4430_CM_CEFUSE_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000)
 #define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020)
+
+/* CM2.RESTORE_CM2 register offsets */
+#define OMAP4_CM_L3_1_CLKSTCTRL_RESTORE_OFFSET		0x0000
+#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000)
+#define OMAP4_CM_L3_2_CLKSTCTRL_RESTORE_OFFSET		0x0004
+#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004)
+#define OMAP4_CM_L4CFG_CLKSTCTRL_RESTORE_OFFSET		0x0008
+#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008)
+#define OMAP4_CM_MEMIF_CLKSTCTRL_RESTORE_OFFSET		0x000c
+#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c)
+#define OMAP4_CM_L4PER_CLKSTCTRL_RESTORE_OFFSET		0x0010
+#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010)
+#define OMAP4_CM_L3INIT_CLKSTCTRL_RESTORE_OFFSET	0x0014
+#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014)
+#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_RESTORE_OFFSET	0x0018
+#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018)
+#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE_OFFSET	0x001c
+#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c)
+#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE_OFFSET	0x0020
+#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020)
+#define OMAP4_CM_CM2_PROFILING_CLKCTRL_RESTORE_OFFSET	0x0024
+#define OMAP4430_CM_CM2_PROFILING_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024)
+#define OMAP4_CM_D2D_STATICDEP_RESTORE_OFFSET		0x0028
+#define OMAP4430_CM_D2D_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028)
+#define OMAP4_CM_L3_1_DYNAMICDEP_RESTORE_OFFSET		0x002c
+#define OMAP4430_CM_L3_1_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c)
+#define OMAP4_CM_L3_2_DYNAMICDEP_RESTORE_OFFSET		0x0030
+#define OMAP4430_CM_L3_2_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030)
+#define OMAP4_CM_D2D_DYNAMICDEP_RESTORE_OFFSET		0x0034
+#define OMAP4430_CM_D2D_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034)
+#define OMAP4_CM_L4CFG_DYNAMICDEP_RESTORE_OFFSET	0x0038
+#define OMAP4430_CM_L4CFG_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038)
+#define OMAP4_CM_L4PER_DYNAMICDEP_RESTORE_OFFSET	0x003c
+#define OMAP4430_CM_L4PER_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c)
+#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_RESTORE_OFFSET	0x0040
+#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040)
+#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_RESTORE_OFFSET	0x0044
+#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0044)
+#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_RESTORE_OFFSET	0x0048
+#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0048)
+#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_RESTORE_OFFSET	0x004c
+#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x004c)
+#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_RESTORE_OFFSET	0x0050
+#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0050)
+#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE_OFFSET	0x0054
+#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0054)
+#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE_OFFSET	0x0058
+#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0058)
+#define OMAP4_CM_SDMA_STATICDEP_RESTORE_OFFSET		0x005c
+#define OMAP4430_CM_SDMA_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x005c)
 #endif
diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c
index b101091e95d6..f8a660a1a4a6 100644
--- a/arch/arm/mach-omap2/cm4xxx.c
+++ b/arch/arm/mach-omap2/cm4xxx.c
@@ -43,7 +43,6 @@
  *                 using separate functional clock
  *   0x3 disabled: Module is disabled and cannot be accessed
  *
- * TODO: Need to handle module accessible in idle state
  */
 int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg)
 {
@@ -52,9 +51,11 @@ int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg)
 	if (!clkctrl_reg)
 		return 0;
 
-	omap_test_timeout(((__raw_readl(clkctrl_reg) &
-			    OMAP4430_IDLEST_MASK) == 0),
-			  MAX_MODULE_READY_TIME, i);
+	omap_test_timeout((
+		((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) == 0) ||
+		 (((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) >>
+		  OMAP4430_IDLEST_SHIFT) == 0x2)),
+		MAX_MODULE_READY_TIME, i);
 
 	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
 }
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
new file mode 100644
index 000000000000..778929f7e92d
--- /dev/null
+++ b/arch/arm/mach-omap2/common.c
@@ -0,0 +1,135 @@
+/*
+ * linux/arch/arm/mach-omap2/common.c
+ *
+ * Code common to all OMAP2+ machines.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Copyright (C) 2010 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/mux.h>
+
+#include <plat/clock.h>
+
+#include "sdrc.h"
+#include "control.h"
+
+/* Global address base setup code */
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
+{
+	omap2_set_globals_tap(omap2_globals);
+	omap2_set_globals_sdrc(omap2_globals);
+	omap2_set_globals_control(omap2_globals);
+	omap2_set_globals_prcm(omap2_globals);
+}
+
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+static struct omap_globals omap242x_globals = {
+	.class	= OMAP242X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
+	.sdrc	= OMAP2420_SDRC_BASE,
+	.sms	= OMAP2420_SMS_BASE,
+	.ctrl	= OMAP242X_CTRL_BASE,
+	.prm	= OMAP2420_PRM_BASE,
+	.cm	= OMAP2420_CM_BASE,
+	.uart1_phys	= OMAP2_UART1_BASE,
+	.uart2_phys	= OMAP2_UART2_BASE,
+	.uart3_phys	= OMAP2_UART3_BASE,
+};
+
+void __init omap2_set_globals_242x(void)
+{
+	__omap2_set_globals(&omap242x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+
+static struct omap_globals omap243x_globals = {
+	.class	= OMAP243X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
+	.sdrc	= OMAP243X_SDRC_BASE,
+	.sms	= OMAP243X_SMS_BASE,
+	.ctrl	= OMAP243X_CTRL_BASE,
+	.prm	= OMAP2430_PRM_BASE,
+	.cm	= OMAP2430_CM_BASE,
+	.uart1_phys	= OMAP2_UART1_BASE,
+	.uart2_phys	= OMAP2_UART2_BASE,
+	.uart3_phys	= OMAP2_UART3_BASE,
+};
+
+void __init omap2_set_globals_243x(void)
+{
+	__omap2_set_globals(&omap243x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+
+static struct omap_globals omap3_globals = {
+	.class	= OMAP343X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
+	.sdrc	= OMAP343X_SDRC_BASE,
+	.sms	= OMAP343X_SMS_BASE,
+	.ctrl	= OMAP343X_CTRL_BASE,
+	.prm	= OMAP3430_PRM_BASE,
+	.cm	= OMAP3430_CM_BASE,
+	.uart1_phys	= OMAP3_UART1_BASE,
+	.uart2_phys	= OMAP3_UART2_BASE,
+	.uart3_phys	= OMAP3_UART3_BASE,
+	.uart4_phys	= OMAP3_UART4_BASE,	/* Only on 3630 */
+};
+
+void __init omap2_set_globals_3xxx(void)
+{
+	__omap2_set_globals(&omap3_globals);
+}
+
+void __init omap3_map_io(void)
+{
+	omap2_set_globals_3xxx();
+	omap34xx_map_common_io();
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+	.class	= OMAP443X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+	.ctrl	= OMAP443X_SCM_BASE,
+	.ctrl_pad	= OMAP443X_CTRL_BASE,
+	.prm	= OMAP4430_PRM_BASE,
+	.cm	= OMAP4430_CM_BASE,
+	.cm2	= OMAP4430_CM2_BASE,
+	.uart1_phys	= OMAP4_UART1_BASE,
+	.uart2_phys	= OMAP4_UART2_BASE,
+	.uart3_phys	= OMAP4_UART3_BASE,
+	.uart4_phys	= OMAP4_UART4_BASE,
+};
+
+void __init omap2_set_globals_443x(void)
+{
+	omap2_set_globals_tap(&omap4_globals);
+	omap2_set_globals_control(&omap4_globals);
+	omap2_set_globals_prcm(&omap4_globals);
+}
+#endif
+
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index a8d20eef2306..1fa3294b6048 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -16,15 +16,18 @@
 #include <linux/io.h>
 
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/sdrc.h>
+
 #include "cm-regbits-34xx.h"
 #include "prm-regbits-34xx.h"
 #include "cm.h"
 #include "prm.h"
 #include "sdrc.h"
+#include "pm.h"
+#include "control.h"
 
 static void __iomem *omap2_ctrl_base;
+static void __iomem *omap4_ctrl_pad_base;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 struct omap3_scratchpad {
@@ -137,6 +140,7 @@ static struct omap3_control_regs control_context;
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
 
 #define OMAP_CTRL_REGADDR(reg)		(omap2_ctrl_base + (reg))
+#define OMAP4_CTRL_PAD_REGADDR(reg)	(omap4_ctrl_pad_base + (reg))
 
 void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
 {
@@ -145,6 +149,12 @@ void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
 		omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
 		WARN_ON(!omap2_ctrl_base);
 	}
+
+	/* Static mapping, never released */
+	if (omap2_globals->ctrl_pad) {
+		omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K);
+		WARN_ON(!omap4_ctrl_pad_base);
+	}
 }
 
 void __iomem *omap_ctrl_base_get(void)
@@ -182,6 +192,23 @@ void omap_ctrl_writel(u32 val, u16 offset)
 	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
 }
 
+/*
+ * On OMAP4 control pad are not addressable from control
+ * core base. So the common omap_ctrl_read/write APIs breaks
+ * Hence export separate APIs to manage the omap4 pad control
+ * registers. This APIs will work only for OMAP4
+ */
+
+u32 omap4_ctrl_pad_readl(u16 offset)
+{
+	return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset));
+}
+
+void omap4_ctrl_pad_writel(u32 val, u16 offset)
+{
+	__raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset));
+}
+
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 /*
  * Clears the scratchpad contents in case of cold boot-
@@ -190,7 +217,7 @@ void omap_ctrl_writel(u32 val, u16 offset)
 void omap3_clear_scratchpad_contents(void)
 {
 	u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
-	u32 *v_addr;
+	void __iomem *v_addr;
 	u32 offset = 0;
 	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
 	if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
@@ -206,7 +233,7 @@ void omap3_clear_scratchpad_contents(void)
 /* Populate the scratchpad structure with restore structure */
 void omap3_save_scratchpad_contents(void)
 {
-	void * __iomem scratchpad_address;
+	void  __iomem *scratchpad_address;
 	u32 arm_context_addr;
 	struct omap3_scratchpad scratchpad_contents;
 	struct omap3_scratchpad_prcm_block prcm_block_contents;
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/mach-omap2/control.h
index 131bf405c2f6..b6c6b7c450b3 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -1,10 +1,10 @@
 /*
- * arch/arm/plat-omap/include/mach/control.h
+ * arch/arm/mach-omap2/control.h
  *
  * OMAP2/3/4 System Control Module definitions
  *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2010 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -13,10 +13,14 @@
  * the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
+#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
 
 #include <mach/io.h>
+#include <mach/ctrl_module_core_44xx.h>
+#include <mach/ctrl_module_wkup_44xx.h>
+#include <mach/ctrl_module_pad_core_44xx.h>
+#include <mach/ctrl_module_pad_wkup_44xx.h>
 
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
@@ -204,12 +208,6 @@
 #define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
 #define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
 
-/* 44xx control status register offset */
-#define OMAP44XX_CONTROL_STATUS		0x2c4
-
-/* 44xx-only CONTROL_GENERAL register offsets */
-#define OMAP44XX_CONTROL_MMC1			0x628
-#define OMAP44XX_CONTROL_PBIAS_LITE		0x600
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.
@@ -225,6 +223,8 @@
 #define OMAP2_MMCSDIO1ADPCLKISEL	(1 << 24) /* MMC1 loop back clock */
 #define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
 #define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
+#define OMAP2_MCBSP1_FSR_MASK		(1 << 4)
+#define OMAP2_MCBSP1_CLKR_MASK		(1 << 3)
 #define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
 
 /* CONTROL_DEVCONF1 bits */
@@ -255,23 +255,6 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
-/* CONTROL_PBIAS_LITE bits for OMAP4 */
-#define OMAP4_MMC1_PWRDNZ			(1 << 26)
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE		(1 << 25)
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT	(1 << 24)
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR	(1 << 23)
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ		(1 << 22)
-#define OMAP4_MMC1_PBIASLITE_VMODE		(1 << 21)
-#define OMAP4_USBC1_ICUSB_PWRDNZ		(1 << 20)
-
-#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0	(1 << 31)
-#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1	(1 << 30)
-#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2	(1 << 29)
-#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3	(1 << 28)
-#define OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL	(1 << 27)
-#define OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL	(1 << 26)
-#define OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL	(1 << 25)
-
 /* CONTROL_PROG_IO1 bits */
 #define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)
 
@@ -338,12 +321,12 @@
 #define		FEAT_L2CACHE_256KB	3
 
 #define OMAP3_ISP_SHIFT			5
-#define OMAP3_ISP_MASK			(1<< OMAP3_ISP_SHIFT)
+#define OMAP3_ISP_MASK			(1 << OMAP3_ISP_SHIFT)
 #define		FEAT_ISP		0
 #define		FEAT_ISP_NONE		1
 
 #define OMAP3_NEON_SHIFT		4
-#define OMAP3_NEON_MASK			(1<< OMAP3_NEON_SHIFT)
+#define OMAP3_NEON_MASK			(1 << OMAP3_NEON_SHIFT)
 #define		FEAT_NEON		0
 #define		FEAT_NEON_NONE		1
 
@@ -354,9 +337,11 @@ extern void __iomem *omap_ctrl_base_get(void);
 extern u8 omap_ctrl_readb(u16 offset);
 extern u16 omap_ctrl_readw(u16 offset);
 extern u32 omap_ctrl_readl(u16 offset);
+extern u32 omap4_ctrl_pad_readl(u16 offset);
 extern void omap_ctrl_writeb(u8 val, u16 offset);
 extern void omap_ctrl_writew(u16 val, u16 offset);
 extern void omap_ctrl_writel(u32 val, u16 offset);
+extern void omap4_ctrl_pad_writel(u32 val, u16 offset);
 
 extern void omap3_save_scratchpad_contents(void);
 extern void omap3_clear_scratchpad_contents(void);
@@ -371,11 +356,13 @@ extern void omap3_control_restore_context(void);
 #define omap_ctrl_readb(x)		0
 #define omap_ctrl_readw(x)		0
 #define omap_ctrl_readl(x)		0
+#define omap4_ctrl_pad_readl(x)		0
 #define omap_ctrl_writeb(x, y)		WARN_ON(1)
 #define omap_ctrl_writew(x, y)		WARN_ON(1)
 #define omap_ctrl_writel(x, y)		WARN_ON(1)
+#define omap4_ctrl_pad_writel(x, y)	WARN_ON(1)
 #endif
 #endif	/* __ASSEMBLY__ */
 
-#endif /* __ASM_ARCH_CONTROL_H */
+#endif /* __ARCH_ARM_MACH_OMAP2_CONTROL_H */
 
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 3d3d035db9af..0d50b45d041c 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -29,10 +29,10 @@
 #include <plat/irqs.h>
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
-#include <plat/control.h>
 #include <plat/serial.h>
 
 #include "pm.h"
+#include "control.h"
 
 #ifdef CONFIG_CPU_IDLE
 
@@ -60,7 +60,8 @@ struct omap3_processor_cx {
 
 struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
 struct omap3_processor_cx current_cx_state;
-struct powerdomain *mpu_pd, *core_pd;
+struct powerdomain *mpu_pd, *core_pd, *per_pd;
+struct powerdomain *cam_pd;
 
 /*
  * The latencies/thresholds for various C states have
@@ -233,14 +234,60 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 			       struct cpuidle_state *state)
 {
 	struct cpuidle_state *new_state = next_valid_state(dev, state);
+	u32 core_next_state, per_next_state = 0, per_saved_state = 0;
+	u32 cam_state;
+	struct omap3_processor_cx *cx;
+	int ret;
 
 	if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
 		BUG_ON(!dev->safe_state);
 		new_state = dev->safe_state;
+		goto select_state;
 	}
 
+	cx = cpuidle_get_statedata(state);
+	core_next_state = cx->core_state;
+
+	/*
+	 * FIXME: we currently manage device-specific idle states
+	 *        for PER and CORE in combination with CPU-specific
+	 *        idle states.  This is wrong, and device-specific
+	 *        idle managment needs to be separated out into 
+	 *        its own code.
+	 */
+
+	/*
+	 * Prevent idle completely if CAM is active.
+	 * CAM does not have wakeup capability in OMAP3.
+	 */
+	cam_state = pwrdm_read_pwrst(cam_pd);
+	if (cam_state == PWRDM_POWER_ON) {
+		new_state = dev->safe_state;
+		goto select_state;
+	}
+
+	/*
+	 * Prevent PER off if CORE is not in retention or off as this
+	 * would disable PER wakeups completely.
+	 */
+	per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
+	if ((per_next_state == PWRDM_POWER_OFF) &&
+	    (core_next_state > PWRDM_POWER_RET))
+		per_next_state = PWRDM_POWER_RET;
+
+	/* Are we changing PER target state? */
+	if (per_next_state != per_saved_state)
+		pwrdm_set_next_pwrst(per_pd, per_next_state);
+
+select_state:
 	dev->last_state = new_state;
-	return omap3_enter_idle(dev, new_state);
+	ret = omap3_enter_idle(dev, new_state);
+
+	/* Restore original PER state if it was modified */
+	if (per_next_state != per_saved_state)
+		pwrdm_set_next_pwrst(per_pd, per_saved_state);
+
+	return ret;
 }
 
 DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
@@ -328,7 +375,8 @@ void omap_init_power_states(void)
 			cpuidle_params_table[OMAP3_STATE_C2].threshold;
 	omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
 	omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
-	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
+	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
 
 	/* C3 . MPU CSWR + Core inactive */
 	omap3_power_states[OMAP3_STATE_C3].valid =
@@ -426,6 +474,8 @@ int __init omap3_idle_init(void)
 
 	mpu_pd = pwrdm_lookup("mpu_pwrdm");
 	core_pd = pwrdm_lookup("core_pwrdm");
+	per_pd = pwrdm_lookup("per_pwrdm");
+	cam_pd = pwrdm_lookup("cam_pwrdm");
 
 	omap_init_power_states();
 	cpuidle_register_driver(&omap3_idle_driver);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 03e6c9ed82a4..5a0c148e23bc 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -9,12 +9,12 @@
  * (at your option) any later version.
  */
 
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -22,15 +22,17 @@
 #include <asm/mach/map.h>
 #include <asm/pmu.h>
 
-#include <plat/control.h>
 #include <plat/tc.h>
 #include <plat/board.h>
-#include <plat/mux.h>
+#include <plat/mcbsp.h>
 #include <mach/gpio.h>
 #include <plat/mmc.h>
 #include <plat/dma.h>
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
 
 #include "mux.h"
+#include "control.h"
 
 #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
 
@@ -153,10 +155,12 @@ static struct resource omap2_mbox_resources[] = {
 	{
 		.start		= INT_24XX_MAIL_U0_MPU,
 		.flags		= IORESOURCE_IRQ,
+		.name		= "dsp",
 	},
 	{
 		.start		= INT_24XX_MAIL_U3_MPU,
 		.flags		= IORESOURCE_IRQ,
+		.name		= "iva",
 	},
 };
 static int omap2_mbox_resources_sz = ARRAY_SIZE(omap2_mbox_resources);
@@ -175,6 +179,7 @@ static struct resource omap3_mbox_resources[] = {
 	{
 		.start		= INT_24XX_MAIL_U0_MPU,
 		.flags		= IORESOURCE_IRQ,
+		.name		= "dsp",
 	},
 };
 static int omap3_mbox_resources_sz = ARRAY_SIZE(omap3_mbox_resources);
@@ -196,6 +201,7 @@ static struct resource omap4_mbox_resources[] = {
 	{
 		.start          = OMAP44XX_IRQ_MAIL_U0,
 		.flags          = IORESOURCE_IRQ,
+		.name		= "mbox",
 	},
 };
 static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources);
@@ -205,7 +211,7 @@ static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources);
 #endif
 
 static struct platform_device mbox_device = {
-	.name		= "omap2-mailbox",
+	.name		= "omap-mailbox",
 	.id		= -1,
 };
 
@@ -230,63 +236,43 @@ static inline void omap_init_mbox(void)
 static inline void omap_init_mbox(void) { }
 #endif /* CONFIG_OMAP_MBOX_FWK */
 
-#if defined(CONFIG_OMAP_STI)
-
-#if defined(CONFIG_ARCH_OMAP2)
+static inline void omap_init_sti(void) {}
 
-#define OMAP2_STI_BASE		0x48068000
-#define OMAP2_STI_CHANNEL_BASE	0x54000000
-#define OMAP2_STI_IRQ		4
+#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
 
-static struct resource sti_resources[] = {
-	{
-		.start		= OMAP2_STI_BASE,
-		.end		= OMAP2_STI_BASE + 0x7ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP2_STI_CHANNEL_BASE,
-		.end		= OMAP2_STI_CHANNEL_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP2_STI_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	}
+static struct platform_device omap_pcm = {
+	.name	= "omap-pcm-audio",
+	.id	= -1,
 };
-#elif defined(CONFIG_ARCH_OMAP3)
 
-#define OMAP3_SDTI_BASE		0x54500000
-#define OMAP3_SDTI_CHANNEL_BASE	0x54600000
+/*
+ * OMAP2420 has 2 McBSP ports
+ * OMAP2430 has 5 McBSP ports
+ * OMAP3 has 5 McBSP ports
+ * OMAP4 has 4 McBSP ports
+ */
+OMAP_MCBSP_PLATFORM_DEVICE(1);
+OMAP_MCBSP_PLATFORM_DEVICE(2);
+OMAP_MCBSP_PLATFORM_DEVICE(3);
+OMAP_MCBSP_PLATFORM_DEVICE(4);
+OMAP_MCBSP_PLATFORM_DEVICE(5);
 
-static struct resource sti_resources[] = {
-	{
-		.start		= OMAP3_SDTI_BASE,
-		.end		= OMAP3_SDTI_BASE + 0xFFF,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3_SDTI_CHANNEL_BASE,
-		.end		= OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
-		.flags		= IORESOURCE_MEM,
+static void omap_init_audio(void)
+{
+	platform_device_register(&omap_mcbsp1);
+	platform_device_register(&omap_mcbsp2);
+	if (cpu_is_omap243x() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		platform_device_register(&omap_mcbsp3);
+		platform_device_register(&omap_mcbsp4);
 	}
-};
+	if (cpu_is_omap243x() || cpu_is_omap34xx())
+		platform_device_register(&omap_mcbsp5);
 
-#endif
-
-static struct platform_device sti_device = {
-	.name		= "sti",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sti_resources),
-	.resource	= sti_resources,
-};
-
-static inline void omap_init_sti(void)
-{
-	platform_device_register(&sti_device);
+	platform_device_register(&omap_pcm);
 }
+
 #else
-static inline void omap_init_sti(void) {}
+static inline void omap_init_audio(void) {}
 #endif
 
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
@@ -552,6 +538,76 @@ static void omap_init_sham(void)
 static inline void omap_init_sham(void) { }
 #endif
 
+#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP2
+static struct resource omap2_aes_resources[] = {
+	{
+		.start	= OMAP24XX_SEC_AES_BASE,
+		.end	= OMAP24XX_SEC_AES_BASE + 0x4C,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP24XX_DMA_AES_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= OMAP24XX_DMA_AES_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources);
+#else
+#define omap2_aes_resources		NULL
+#define omap2_aes_resources_sz		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct resource omap3_aes_resources[] = {
+	{
+		.start	= OMAP34XX_SEC_AES_BASE,
+		.end	= OMAP34XX_SEC_AES_BASE + 0x4C,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_DMA_AES2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= OMAP34XX_DMA_AES2_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources);
+#else
+#define omap3_aes_resources		NULL
+#define omap3_aes_resources_sz		0
+#endif
+
+static struct platform_device aes_device = {
+	.name		= "omap-aes",
+	.id		= -1,
+};
+
+static void omap_init_aes(void)
+{
+	if (cpu_is_omap24xx()) {
+		aes_device.resource = omap2_aes_resources;
+		aes_device.num_resources = omap2_aes_resources_sz;
+	} else if (cpu_is_omap34xx()) {
+		aes_device.resource = omap3_aes_resources;
+		aes_device.num_resources = omap3_aes_resources_sz;
+	} else {
+		pr_err("%s: platform not supported\n", __func__);
+		return;
+	}
+	platform_device_register(&aes_device);
+}
+
+#else
+static inline void omap_init_aes(void) { }
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
@@ -672,19 +728,19 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 					OMAP_PIN_INPUT_PULLUP);
 
 	if (cpu_is_omap2420() && controller_nr == 0) {
-		omap_cfg_reg(H18_24XX_MMC_CMD);
-		omap_cfg_reg(H15_24XX_MMC_CLKI);
-		omap_cfg_reg(G19_24XX_MMC_CLKO);
-		omap_cfg_reg(F20_24XX_MMC_DAT0);
-		omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
-		omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
-		if (mmc_controller->slots[0].wires == 4) {
-			omap_cfg_reg(H14_24XX_MMC_DAT1);
-			omap_cfg_reg(E19_24XX_MMC_DAT2);
-			omap_cfg_reg(D19_24XX_MMC_DAT3);
-			omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
-			omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
-			omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
+		omap_mux_init_signal("sdmmc_cmd", 0);
+		omap_mux_init_signal("sdmmc_clki", 0);
+		omap_mux_init_signal("sdmmc_clko", 0);
+		omap_mux_init_signal("sdmmc_dat0", 0);
+		omap_mux_init_signal("sdmmc_dat_dir0", 0);
+		omap_mux_init_signal("sdmmc_cmd_dir", 0);
+		if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
+			omap_mux_init_signal("sdmmc_dat1", 0);
+			omap_mux_init_signal("sdmmc_dat2", 0);
+			omap_mux_init_signal("sdmmc_dat3", 0);
+			omap_mux_init_signal("sdmmc_dat_dir1", 0);
+			omap_mux_init_signal("sdmmc_dat_dir2", 0);
+			omap_mux_init_signal("sdmmc_dat_dir3", 0);
 		}
 
 		/*
@@ -706,8 +762,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 				OMAP_PIN_INPUT_PULLUP);
 			omap_mux_init_signal("sdmmc1_dat0",
 				OMAP_PIN_INPUT_PULLUP);
-			if (mmc_controller->slots[0].wires == 4 ||
-				mmc_controller->slots[0].wires == 8) {
+			if (mmc_controller->slots[0].caps &
+				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
 				omap_mux_init_signal("sdmmc1_dat1",
 					OMAP_PIN_INPUT_PULLUP);
 				omap_mux_init_signal("sdmmc1_dat2",
@@ -715,7 +771,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 				omap_mux_init_signal("sdmmc1_dat3",
 					OMAP_PIN_INPUT_PULLUP);
 			}
-			if (mmc_controller->slots[0].wires == 8) {
+			if (mmc_controller->slots[0].caps &
+						MMC_CAP_8_BIT_DATA) {
 				omap_mux_init_signal("sdmmc1_dat4",
 					OMAP_PIN_INPUT_PULLUP);
 				omap_mux_init_signal("sdmmc1_dat5",
@@ -739,8 +796,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
 			 * in the board-*.c files
 			 */
-			if (mmc_controller->slots[0].wires == 4 ||
-				mmc_controller->slots[0].wires == 8) {
+			if (mmc_controller->slots[0].caps &
+				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
 				omap_mux_init_signal("sdmmc2_dat1",
 					OMAP_PIN_INPUT_PULLUP);
 				omap_mux_init_signal("sdmmc2_dat2",
@@ -748,7 +805,8 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 				omap_mux_init_signal("sdmmc2_dat3",
 					OMAP_PIN_INPUT_PULLUP);
 			}
-			if (mmc_controller->slots[0].wires == 8) {
+			if (mmc_controller->slots[0].caps &
+							MMC_CAP_8_BIT_DATA) {
 				omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
 					OMAP_PIN_INPUT_PULLUP);
 				omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
@@ -799,13 +857,13 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 		case 3:
 			if (!cpu_is_omap44xx())
 				return;
-			base = OMAP4_MMC4_BASE + OMAP4_MMC_REG_OFFSET;
+			base = OMAP4_MMC4_BASE;
 			irq = OMAP44XX_IRQ_MMC4;
 			break;
 		case 4:
 			if (!cpu_is_omap44xx())
 				return;
-			base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
+			base = OMAP4_MMC5_BASE;
 			irq = OMAP44XX_IRQ_MMC5;
 			break;
 		default:
@@ -816,10 +874,8 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			size = OMAP2420_MMC_SIZE;
 			name = "mmci-omap";
 		} else if (cpu_is_omap44xx()) {
-			if (i < 3) {
-				base += OMAP4_MMC_REG_OFFSET;
+			if (i < 3)
 				irq += OMAP44XX_IRQ_GIC_START;
-			}
 			size = OMAP4_HSMMC_SIZE;
 			name = "mmci-omap-hs";
 		} else {
@@ -895,12 +951,74 @@ static inline void omap_init_vout(void) {}
 
 /*-------------------------------------------------------------------------*/
 
+/*
+ * Inorder to avoid any assumptions from bootloader regarding WDT
+ * settings, WDT module is reset during init. This enables the watchdog
+ * timer. Hence it is required to disable the watchdog after the WDT reset
+ * during init. Otherwise the system would reboot as per the default
+ * watchdog timer registers settings.
+ */
+#define OMAP_WDT_WPS	(0x34)
+#define OMAP_WDT_SPR	(0x48)
+
+static int omap2_disable_wdt(struct omap_hwmod *oh, void *unused)
+{
+	void __iomem *base;
+	int ret;
+
+	if (!oh) {
+		pr_err("%s: Could not look up wdtimer_hwmod\n", __func__);
+		return -EINVAL;
+	}
+
+	base = omap_hwmod_get_mpu_rt_va(oh);
+	if (!base) {
+		pr_err("%s: Could not get the base address for %s\n",
+				oh->name, __func__);
+		return -EINVAL;
+	}
+
+	/* Enable the clocks before accessing the WDT registers */
+	ret = omap_hwmod_enable(oh);
+	if (ret) {
+		pr_err("%s: Could not enable clocks for %s\n",
+				oh->name, __func__);
+		return ret;
+	}
+
+	/* sequence required to disable watchdog */
+	__raw_writel(0xAAAA, base + OMAP_WDT_SPR);
+	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
+		cpu_relax();
+
+	__raw_writel(0x5555, base + OMAP_WDT_SPR);
+	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
+		cpu_relax();
+
+	ret = omap_hwmod_idle(oh);
+	if (ret)
+		pr_err("%s: Could not disable clocks for %s\n",
+				oh->name, __func__);
+
+	return ret;
+}
+
+static void __init omap_disable_wdt(void)
+{
+	if (cpu_class_is_omap2())
+		omap_hwmod_for_each_by_class("wd_timer",
+						omap2_disable_wdt, NULL);
+	return;
+}
+
 static int __init omap2_init_devices(void)
 {
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
+	omap_disable_wdt();
 	omap_hsmmc_reset();
+	omap_init_audio();
 	omap_init_camera();
 	omap_init_mbox();
 	omap_init_mcspi();
@@ -908,8 +1026,45 @@ static int __init omap2_init_devices(void)
 	omap_hdq_init();
 	omap_init_sti();
 	omap_init_sham();
+	omap_init_aes();
 	omap_init_vout();
 
 	return 0;
 }
 arch_initcall(omap2_init_devices);
+
+#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+struct omap_device_pm_latency omap_wdt_latency[] = {
+	[0] = {
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func   = omap_device_enable_hwmods,
+		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static int __init omap_init_wdt(void)
+{
+	int id = -1;
+	struct omap_device *od;
+	struct omap_hwmod *oh;
+	char *oh_name = "wd_timer2";
+	char *dev_name = "omap_wdt";
+
+	if (!cpu_class_is_omap2())
+		return 0;
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up wd_timer%d hwmod\n", id);
+		return -EINVAL;
+	}
+
+	od = omap_device_build(dev_name, id, oh, NULL, 0,
+				omap_wdt_latency,
+				ARRAY_SIZE(omap_wdt_latency), 0);
+	WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n",
+				dev_name, oh->name);
+	return 0;
+}
+subsys_initcall(omap_init_wdt);
+#endif
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index b32ccd954a1b..ed8d330522f1 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -463,7 +463,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 	}
 	if (!ret) {
 		/*
-		 * Switch the parent clock in the heirarchy, and make sure
+		 * Switch the parent clock in the hierarchy, and make sure
 		 * that the new parent's usecount is correct.  Note: we
 		 * enable the new parent before disabling the old to avoid
 		 * any unnecessary hardware disable->enable transitions.
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
new file mode 100644
index 000000000000..6feeeae6c21b
--- /dev/null
+++ b/arch/arm/mach-omap2/dsp.c
@@ -0,0 +1,85 @@
+/*
+ * TI's OMAP DSP platform device registration
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include "prm.h"
+#include "cm.h"
+#ifdef CONFIG_BRIDGE_DVFS
+#include <plat/omap-pm.h>
+#endif
+
+#include <plat/dsp.h>
+
+extern phys_addr_t omap_dsp_get_mempool_base(void);
+
+static struct platform_device *omap_dsp_pdev;
+
+static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
+#ifdef CONFIG_BRIDGE_DVFS
+	.dsp_set_min_opp = omap_pm_dsp_set_min_opp,
+	.dsp_get_opp = omap_pm_dsp_get_opp,
+	.cpu_set_freq = omap_pm_cpu_set_freq,
+	.cpu_get_freq = omap_pm_cpu_get_freq,
+#endif
+	.dsp_prm_read = prm_read_mod_reg,
+	.dsp_prm_write = prm_write_mod_reg,
+	.dsp_prm_rmw_bits = prm_rmw_mod_reg_bits,
+	.dsp_cm_read = cm_read_mod_reg,
+	.dsp_cm_write = cm_write_mod_reg,
+	.dsp_cm_rmw_bits = cm_rmw_mod_reg_bits,
+};
+
+static int __init omap_dsp_init(void)
+{
+	struct platform_device *pdev;
+	int err = -ENOMEM;
+	struct omap_dsp_platform_data *pdata = &omap_dsp_pdata;
+
+	pdata->phys_mempool_base = omap_dsp_get_mempool_base();
+
+	if (pdata->phys_mempool_base) {
+		pdata->phys_mempool_size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
+		pr_info("%s: %x bytes @ %x\n", __func__,
+			pdata->phys_mempool_size, pdata->phys_mempool_base);
+	}
+
+	pdev = platform_device_alloc("omap-dsp", -1);
+	if (!pdev)
+		goto err_out;
+
+	err = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+	if (err)
+		goto err_out;
+
+	err = platform_device_add(pdev);
+	if (err)
+		goto err_out;
+
+	omap_dsp_pdev = pdev;
+	return 0;
+
+err_out:
+	platform_device_put(pdev);
+	return err;
+}
+module_init(omap_dsp_init);
+
+static void __exit omap_dsp_exit(void)
+{
+	platform_device_unregister(omap_dsp_pdev);
+}
+module_exit(omap_dsp_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("TI's OMAP DSP platform device registration");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index e57fb29ff855..722209601927 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -19,8 +19,6 @@
 #include <plat/board.h>
 #include <plat/gpmc.h>
 
-#define WR_RD_PIN_MONITORING	0x00600000
-
 static struct omap_nand_platform_data *gpmc_nand_data;
 
 static struct resource gpmc_nand_resource = {
@@ -71,10 +69,10 @@ static int omap2_nand_gpmc_retime(void)
 	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
 
 	/* Configure GPMC */
-	gpmc_cs_write_reg(gpmc_nand_data->cs, GPMC_CS_CONFIG1,
-			GPMC_CONFIG1_DEVICESIZE(gpmc_nand_data->devsize) |
-			GPMC_CONFIG1_DEVICETYPE_NAND);
-
+	gpmc_cs_configure(gpmc_nand_data->cs,
+				GPMC_CONFIG_DEV_SIZE, gpmc_nand_data->devsize);
+	gpmc_cs_configure(gpmc_nand_data->cs,
+			GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
 	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
 	if (err)
 		return err;
@@ -82,27 +80,13 @@ static int omap2_nand_gpmc_retime(void)
 	return 0;
 }
 
-static int gpmc_nand_setup(void)
-{
-	struct device *dev = &gpmc_nand_device.dev;
-
-	/* Set timings in GPMC */
-	if (omap2_nand_gpmc_retime() < 0) {
-		dev_err(dev, "Unable to set gpmc timings\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
 {
-	unsigned int val;
 	int err	= 0;
 	struct device *dev = &gpmc_nand_device.dev;
 
 	gpmc_nand_data = _nand_data;
-	gpmc_nand_data->nand_setup = gpmc_nand_setup;
+	gpmc_nand_data->nand_setup = omap2_nand_gpmc_retime;
 	gpmc_nand_device.dev.platform_data = gpmc_nand_data;
 
 	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
@@ -112,19 +96,16 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
 		return err;
 	}
 
-	err = gpmc_nand_setup();
+	 /* Set timings in GPMC */
+	err = omap2_nand_gpmc_retime();
 	if (err < 0) {
-		dev_err(dev, "NAND platform setup failed: %d\n", err);
+		dev_err(dev, "Unable to set gpmc timings: %d\n", err);
 		return err;
 	}
 
 	/* Enable RD PIN Monitoring Reg */
 	if (gpmc_nand_data->dev_ready) {
-		val  = gpmc_cs_read_reg(gpmc_nand_data->cs,
-						 GPMC_CS_CONFIG1);
-		val |= WR_RD_PIN_MONITORING;
-		gpmc_cs_write_reg(gpmc_nand_data->cs,
-						GPMC_CS_CONFIG1, val);
+		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
 	}
 
 	err = platform_device_register(&gpmc_nand_device);
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
new file mode 100644
index 000000000000..703f150dd01d
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -0,0 +1,113 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-smsc911x.c
+ *
+ * Copyright (C) 2009 Li-Pro.Net
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+
+#include <plat/board.h>
+#include <plat/gpmc.h>
+#include <plat/gpmc-smsc911x.h>
+
+static struct omap_smsc911x_platform_data *gpmc_cfg;
+
+static struct resource gpmc_smsc911x_resources[] = {
+	[0] = {
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config gpmc_smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT,
+};
+
+static struct platform_device gpmc_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(gpmc_smsc911x_resources),
+	.resource	= gpmc_smsc911x_resources,
+	.dev		= {
+		.platform_data = &gpmc_smsc911x_config,
+	},
+};
+
+/*
+ * Initialize smsc911x device connected to the GPMC. Note that we
+ * assume that pin multiplexing is done in the board-*.c file,
+ * or in the bootloader.
+ */
+void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
+{
+	unsigned long cs_mem_base;
+	int ret;
+
+	gpmc_cfg = board_data;
+
+	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
+		return;
+	}
+
+	gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;
+
+	if (gpio_request(gpmc_cfg->gpio_irq, "smsc911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
+				gpmc_cfg->gpio_irq);
+		goto free1;
+	}
+
+	gpio_direction_input(gpmc_cfg->gpio_irq);
+	gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+	gpmc_smsc911x_resources[1].flags |=
+					(gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+
+	if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
+		ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset");
+		if (ret) {
+			printk(KERN_ERR "Failed to request GPIO%d for smsc911x reset\n",
+					gpmc_cfg->gpio_reset);
+			goto free2;
+		}
+
+		gpio_direction_output(gpmc_cfg->gpio_reset, 1);
+		gpio_set_value(gpmc_cfg->gpio_reset, 0);
+		msleep(100);
+		gpio_set_value(gpmc_cfg->gpio_reset, 1);
+	}
+
+	if (platform_device_register(&gpmc_smsc911x_device) < 0) {
+		printk(KERN_ERR "Unable to register smsc911x device\n");
+		gpio_free(gpmc_cfg->gpio_reset);
+		goto free2;
+	}
+
+	return;
+
+free2:
+	gpio_free(gpmc_cfg->gpio_irq);
+free1:
+	gpmc_cs_free(gpmc_cfg->cs);
+
+	printk(KERN_ERR "Could not initialize smsc911x\n");
+}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 5bc3ca03551c..f46933bc9373 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -46,8 +46,9 @@
 #define GPMC_ECC_CONFIG		0x1f4
 #define GPMC_ECC_CONTROL	0x1f8
 #define GPMC_ECC_SIZE_CONFIG	0x1fc
+#define GPMC_ECC1_RESULT        0x200
 
-#define GPMC_CS0		0x60
+#define GPMC_CS0_OFFSET		0x60
 #define GPMC_CS_SIZE		0x30
 
 #define GPMC_MEM_START		0x00000000
@@ -92,7 +93,8 @@ struct omap3_gpmc_regs {
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
-static unsigned		gpmc_cs_map;
+static unsigned int gpmc_cs_map;	/* flag for cs which are initialized */
+static int gpmc_ecc_used = -EINVAL;	/* cs using ecc engine */
 
 static void __iomem *gpmc_base;
 
@@ -108,11 +110,27 @@ static u32 gpmc_read_reg(int idx)
 	return __raw_readl(gpmc_base + idx);
 }
 
+static void gpmc_cs_write_byte(int cs, int idx, u8 val)
+{
+	void __iomem *reg_addr;
+
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
+	__raw_writeb(val, reg_addr);
+}
+
+static u8 gpmc_cs_read_byte(int cs, int idx)
+{
+	void __iomem *reg_addr;
+
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
+	return __raw_readb(reg_addr);
+}
+
 void gpmc_cs_write_reg(int cs, int idx, u32 val)
 {
 	void __iomem *reg_addr;
 
-	reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
 	__raw_writel(val, reg_addr);
 }
 
@@ -120,7 +138,7 @@ u32 gpmc_cs_read_reg(int cs, int idx)
 {
 	void __iomem *reg_addr;
 
-	reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
 	return __raw_readl(reg_addr);
 }
 
@@ -419,8 +437,157 @@ void gpmc_cs_free(int cs)
 EXPORT_SYMBOL(gpmc_cs_free);
 
 /**
+ * gpmc_read_status - read access request to get the different gpmc status
+ * @cmd: command type
+ * @return status
+ */
+int gpmc_read_status(int cmd)
+{
+	int	status = -EINVAL;
+	u32	regval = 0;
+
+	switch (cmd) {
+	case GPMC_GET_IRQ_STATUS:
+		status = gpmc_read_reg(GPMC_IRQSTATUS);
+		break;
+
+	case GPMC_PREFETCH_FIFO_CNT:
+		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
+		status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
+		break;
+
+	case GPMC_PREFETCH_COUNT:
+		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
+		status = GPMC_PREFETCH_STATUS_COUNT(regval);
+		break;
+
+	case GPMC_STATUS_BUFFER:
+		regval = gpmc_read_reg(GPMC_STATUS);
+		/* 1 : buffer is available to write */
+		status = regval & GPMC_STATUS_BUFF_EMPTY;
+		break;
+
+	default:
+		printk(KERN_ERR "gpmc_read_status: Not supported\n");
+	}
+	return status;
+}
+EXPORT_SYMBOL(gpmc_read_status);
+
+/**
+ * gpmc_cs_configure - write request to configure gpmc
+ * @cs: chip select number
+ * @cmd: command type
+ * @wval: value to write
+ * @return status of the operation
+ */
+int gpmc_cs_configure(int cs, int cmd, int wval)
+{
+	int err = 0;
+	u32 regval = 0;
+
+	switch (cmd) {
+	case GPMC_SET_IRQ_STATUS:
+		gpmc_write_reg(GPMC_IRQSTATUS, wval);
+		break;
+
+	case GPMC_CONFIG_WP:
+		regval = gpmc_read_reg(GPMC_CONFIG);
+		if (wval)
+			regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */
+		else
+			regval |= GPMC_CONFIG_WRITEPROTECT;  /* WP is OFF */
+		gpmc_write_reg(GPMC_CONFIG, regval);
+		break;
+
+	case GPMC_CONFIG_RDY_BSY:
+		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+		if (wval)
+			regval |= WR_RD_PIN_MONITORING;
+		else
+			regval &= ~WR_RD_PIN_MONITORING;
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
+		break;
+
+	case GPMC_CONFIG_DEV_SIZE:
+		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+		regval |= GPMC_CONFIG1_DEVICESIZE(wval);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
+		break;
+
+	case GPMC_CONFIG_DEV_TYPE:
+		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+		regval |= GPMC_CONFIG1_DEVICETYPE(wval);
+		if (wval == GPMC_DEVICETYPE_NOR)
+			regval |= GPMC_CONFIG1_MUXADDDATA;
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
+		break;
+
+	default:
+		printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
+		err = -EINVAL;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL(gpmc_cs_configure);
+
+/**
+ * gpmc_nand_read - nand specific read access request
+ * @cs: chip select number
+ * @cmd: command type
+ */
+int gpmc_nand_read(int cs, int cmd)
+{
+	int rval = -EINVAL;
+
+	switch (cmd) {
+	case GPMC_NAND_DATA:
+		rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
+		break;
+
+	default:
+		printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
+	}
+	return rval;
+}
+EXPORT_SYMBOL(gpmc_nand_read);
+
+/**
+ * gpmc_nand_write - nand specific write request
+ * @cs: chip select number
+ * @cmd: command type
+ * @wval: value to write
+ */
+int gpmc_nand_write(int cs, int cmd, int wval)
+{
+	int err = 0;
+
+	switch (cmd) {
+	case GPMC_NAND_COMMAND:
+		gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
+		break;
+
+	case GPMC_NAND_ADDRESS:
+		gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
+		break;
+
+	case GPMC_NAND_DATA:
+		gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
+
+	default:
+		printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
+		err = -EINVAL;
+	}
+	return err;
+}
+EXPORT_SYMBOL(gpmc_nand_write);
+
+
+
+/**
  * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: nand cs (chip select) number
+ * @cs: cs (chip select) number
  * @dma_mode: dma mode enable (1) or disable (0)
  * @u32_count: number of bytes to be transferred
  * @is_write: prefetch read(0) or write post(1) mode
@@ -428,7 +595,6 @@ EXPORT_SYMBOL(gpmc_cs_free);
 int gpmc_prefetch_enable(int cs, int dma_mode,
 				unsigned int u32_count, int is_write)
 {
-	uint32_t prefetch_config1;
 
 	if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
 		/* Set the amount of bytes to be prefetched */
@@ -437,17 +603,17 @@ int gpmc_prefetch_enable(int cs, int dma_mode,
 		/* Set dma/mpu mode, the prefetch read / post write and
 		 * enable the engine. Set which cs is has requested for.
 		 */
-		prefetch_config1 = ((cs << CS_NUM_SHIFT) |
+		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
 					PREFETCH_FIFOTHRESHOLD |
 					ENABLE_PREFETCH |
 					(dma_mode << DMA_MPU_MODE) |
-					(0x1 & is_write));
-		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, prefetch_config1);
+					(0x1 & is_write)));
+
+		/*  Start the prefetch engine */
+		gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
 	} else {
 		return -EBUSY;
 	}
-	/*  Start the prefetch engine */
-	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
 
 	return 0;
 }
@@ -456,24 +622,24 @@ EXPORT_SYMBOL(gpmc_prefetch_enable);
 /**
  * gpmc_prefetch_reset - disables and stops the prefetch engine
  */
-void gpmc_prefetch_reset(void)
+int gpmc_prefetch_reset(int cs)
 {
+	u32 config1;
+
+	/* check if the same module/cs is trying to reset */
+	config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
+	if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
+		return -EINVAL;
+
 	/* Stop the PFPW engine */
 	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
 
 	/* Reset/disable the PFPW engine */
 	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
 
-/**
- * gpmc_prefetch_status - reads prefetch status of engine
- */
-int  gpmc_prefetch_status(void)
-{
-	return gpmc_read_reg(GPMC_PREFETCH_STATUS);
+	return 0;
 }
-EXPORT_SYMBOL(gpmc_prefetch_status);
+EXPORT_SYMBOL(gpmc_prefetch_reset);
 
 static void __init gpmc_mem_init(void)
 {
@@ -615,3 +781,79 @@ void omap3_gpmc_restore_context(void)
 	}
 }
 #endif /* CONFIG_ARCH_OMAP3 */
+
+/**
+ * gpmc_enable_hwecc - enable hardware ecc functionality
+ * @cs: chip select number
+ * @mode: read/write mode
+ * @dev_width: device bus width(1 for x16, 0 for x8)
+ * @ecc_size: bytes for which ECC will be generated
+ */
+int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
+{
+	unsigned int val;
+
+	/* check if ecc module is in used */
+	if (gpmc_ecc_used != -EINVAL)
+		return -EINVAL;
+
+	gpmc_ecc_used = cs;
+
+	/* clear ecc and enable bits */
+	val = ((0x00000001<<8) | 0x00000001);
+	gpmc_write_reg(GPMC_ECC_CONTROL, val);
+
+	/* program ecc and result sizes */
+	val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
+	gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
+
+	switch (mode) {
+	case GPMC_ECC_READ:
+		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+		break;
+	case GPMC_ECC_READSYN:
+		 gpmc_write_reg(GPMC_ECC_CONTROL, 0x100);
+		break;
+	case GPMC_ECC_WRITE:
+		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+		break;
+	default:
+		printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
+		break;
+	}
+
+	/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+	val = (dev_width << 7) | (cs << 1) | (0x1);
+	gpmc_write_reg(GPMC_ECC_CONFIG, val);
+	return 0;
+}
+
+/**
+ * gpmc_calculate_ecc - generate non-inverted ecc bytes
+ * @cs: chip select number
+ * @dat: data pointer over which ecc is computed
+ * @ecc_code: ecc code buffer
+ *
+ * Using non-inverted ECC is considered ugly since writing a blank
+ * page (padding) will clear the ECC bytes. This is not a problem as long
+ * no one is trying to write data on the seemingly unused page. Reading
+ * an erased page will produce an ECC mismatch between generated and read
+ * ECC bytes that has to be dealt with separately.
+ */
+int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
+{
+	unsigned int val = 0x0;
+
+	if (gpmc_ecc_used != cs)
+		return -EINVAL;
+
+	/* read ecc result */
+	val = gpmc_read_reg(GPMC_ECC1_RESULT);
+	*ecc_code++ = val;          /* P128e, ..., P1e */
+	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
+	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+
+	gpmc_ecc_used = -EINVAL;
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 1ef54b036103..34272e4863fd 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -14,11 +14,11 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <mach/hardware.h>
-#include <plat/control.h>
 #include <plat/mmc.h>
 #include <plat/omap-pm.h>
 
 #include "hsmmc.h"
+#include "control.h"
 
 #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
@@ -135,10 +135,11 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot,
 	 *
 	 * FIXME handle VMMC1A as needed ...
 	 */
-	reg = omap_ctrl_readl(control_pbias_offset);
-	reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ |
-					OMAP4_USBC1_ICUSB_PWRDNZ);
-	omap_ctrl_writel(reg, control_pbias_offset);
+	reg = omap4_ctrl_pad_readl(control_pbias_offset);
+	reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
+		OMAP4_MMC1_PWRDNZ_MASK |
+		OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+	omap4_ctrl_pad_writel(reg, control_pbias_offset);
 }
 
 static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
@@ -147,30 +148,33 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
 	u32 reg;
 
 	if (power_on) {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ;
+		reg = omap4_ctrl_pad_readl(control_pbias_offset);
+		reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK;
 		if ((1 << vdd) <= MMC_VDD_165_195)
-			reg &= ~OMAP4_MMC1_PBIASLITE_VMODE;
+			reg &= ~OMAP4_MMC1_PBIASLITE_VMODE_MASK;
 		else
-			reg |= OMAP4_MMC1_PBIASLITE_VMODE;
-		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ |
-						OMAP4_USBC1_ICUSB_PWRDNZ);
-		omap_ctrl_writel(reg, control_pbias_offset);
+			reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK;
+		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
+			OMAP4_MMC1_PWRDNZ_MASK |
+			OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+		omap4_ctrl_pad_writel(reg, control_pbias_offset);
 		/* 4 microsec delay for comparator to generate an error*/
 		udelay(4);
-		reg = omap_ctrl_readl(control_pbias_offset);
-		if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR) {
+		reg = omap4_ctrl_pad_readl(control_pbias_offset);
+		if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
 			pr_err("Pbias Voltage is not same as LDO\n");
 			/* Caution : On VMODE_ERROR Power Down MMC IO */
-			reg &= ~(OMAP4_MMC1_PWRDNZ | OMAP4_USBC1_ICUSB_PWRDNZ);
-			omap_ctrl_writel(reg, control_pbias_offset);
+			reg &= ~(OMAP4_MMC1_PWRDNZ_MASK |
+				OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+			omap4_ctrl_pad_writel(reg, control_pbias_offset);
 		}
 	} else {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		 reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ |
-			OMAP4_MMC1_PBIASLITE_VMODE | OMAP4_MMC1_PWRDNZ |
-			OMAP4_USBC1_ICUSB_PWRDNZ);
-		omap_ctrl_writel(reg, control_pbias_offset);
+		reg = omap4_ctrl_pad_readl(control_pbias_offset);
+		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
+			OMAP4_MMC1_PWRDNZ_MASK |
+			OMAP4_MMC1_PBIASLITE_VMODE_MASK |
+			OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
+		omap4_ctrl_pad_writel(reg, control_pbias_offset);
 	}
 }
 
@@ -218,17 +222,18 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 			control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
 		}
 	} else {
-		control_pbias_offset = OMAP44XX_CONTROL_PBIAS_LITE;
-		control_mmc1 = OMAP44XX_CONTROL_MMC1;
-		reg = omap_ctrl_readl(control_mmc1);
-		reg |= (OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 |
-			OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1);
-		reg &= ~(OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 |
-			OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3);
-		reg |= (OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL |
-			OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL |
-			OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL);
-		omap_ctrl_writel(reg, control_mmc1);
+		control_pbias_offset =
+			OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE;
+		control_mmc1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1;
+		reg = omap4_ctrl_pad_readl(control_mmc1);
+		reg |= (OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK |
+			OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK);
+		reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK |
+			OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK);
+		reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK|
+			OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK |
+			OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK);
+		omap4_ctrl_pad_writel(reg, control_mmc1);
 	}
 
 	for (c = controllers; c->mmc; c++) {
@@ -258,9 +263,13 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 				"mmc%islot%i", c->mmc, 1);
 		mmc->slots[0].name = hc->name;
 		mmc->nr_slots = 1;
-		mmc->slots[0].wires = c->wires;
+		mmc->slots[0].caps = c->caps;
 		mmc->slots[0].internal_clock = !c->ext_clock;
 		mmc->dma_mask = 0xffffffff;
+		if (cpu_is_omap44xx())
+			mmc->reg_offset = OMAP4_MMC_REG_OFFSET;
+		else
+			mmc->reg_offset = 0;
 
 		mmc->get_context_loss_count = hsmmc_get_context_loss;
 
@@ -268,6 +277,7 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 		mmc->slots[0].gpio_wp = c->gpio_wp;
 
 		mmc->slots[0].remux = c->remux;
+		mmc->slots[0].init_card = c->init_card;
 
 		if (c->cover_only)
 			mmc->slots[0].cover = 1;
@@ -297,6 +307,9 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 		else
 			mmc->slots[0].features |= HSMMC_HAS_PBIAS;
 
+		if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0))
+			mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET;
+
 		switch (c->mmc) {
 		case 1:
 			if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
@@ -315,16 +328,20 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 			}
 
 			/* Omap3630 HSMMC1 supports only 4-bit */
-			if (cpu_is_omap3630() && c->wires > 4) {
-				c->wires = 4;
-				mmc->slots[0].wires = c->wires;
+			if (cpu_is_omap3630() &&
+					(c->caps & MMC_CAP_8_BIT_DATA)) {
+				c->caps &= ~MMC_CAP_8_BIT_DATA;
+				c->caps |= MMC_CAP_4_BIT_DATA;
+				mmc->slots[0].caps = c->caps;
 			}
 			break;
 		case 2:
 			if (c->ext_clock)
 				c->transceiver = 1;
-			if (c->transceiver && c->wires > 4)
-				c->wires = 4;
+			if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
+				c->caps &= ~MMC_CAP_8_BIT_DATA;
+				c->caps |= MMC_CAP_4_BIT_DATA;
+			}
 			/* FALLTHROUGH */
 		case 3:
 			if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 36f0ba8d89e2..f119348827d4 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -6,9 +6,12 @@
  * published by the Free Software Foundation.
  */
 
+struct mmc_card;
+
 struct omap2_hsmmc_info {
 	u8	mmc;		/* controller 1/2/3 */
-	u8	wires;		/* 1/4/8 wires */
+	u32	caps;		/* 4/8 wires and any additional host
+				 * capabilities OR'd (ref. linux/mmc/host.h) */
 	bool	transceiver;	/* MMC-2 option */
 	bool	ext_clock;	/* use external pin for input clock */
 	bool	cover_only;	/* No card detect - just cover switch */
@@ -21,8 +24,10 @@ struct omap2_hsmmc_info {
 	char	*name;		/* or NULL for default */
 	struct device *dev;	/* returned: pointer to mmc adapter */
 	int	ocr_mask;	/* temporary HACK */
-	/* Remux (pad configuation) when powering on/off */
+	/* Remux (pad configuration) when powering on/off */
 	void (*remux)(struct device *dev, int slot, int power_on);
+	/* init some special card */
+	void (*init_card)(struct mmc_card *card);
 };
 
 #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 7951ae1447ee..79c478c4cb1c 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -21,32 +21,19 @@
 
 #include <plat/cpu.h>
 #include <plat/i2c.h>
-#include <plat/mux.h>
 
 #include "mux.h"
 
 void __init omap2_i2c_mux_pins(int bus_id)
 {
-	if (cpu_is_omap24xx()) {
-		const int omap24xx_pins[][2] = {
-			{ M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
-			{ J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
-		};
-		int scl, sda;
-
-		scl = omap24xx_pins[bus_id - 1][0];
-		sda = omap24xx_pins[bus_id - 1][1];
-		omap_cfg_reg(sda);
-		omap_cfg_reg(scl);
-	}
+	char mux_name[sizeof("i2c2_scl.i2c2_scl")];
 
 	/* First I2C bus is not muxable */
-	if (cpu_is_omap34xx() && bus_id > 1) {
-		char mux_name[sizeof("i2c2_scl.i2c2_scl")];
+	if (bus_id == 1)
+		return;
 
-		sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
-		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
-		sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
-		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
-	}
+	sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
+	omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+	sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
+	omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
 }
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 37b8a1a4adf8..5f9086c65e48 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -22,9 +22,12 @@
 #include <asm/cputype.h>
 
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/cpu.h>
 
+#include <mach/id.h>
+
+#include "control.h"
+
 static struct omap_chip_id omap_chip;
 static unsigned int omap_revision;
 
@@ -58,7 +61,7 @@ int omap_type(void)
 	} else if (cpu_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
 	} else if (cpu_is_omap44xx()) {
-		val = omap_ctrl_readl(OMAP44XX_CONTROL_STATUS);
+		val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
 	} else {
 		pr_err("Cannot detect omap type!\n");
 		goto out;
@@ -102,30 +105,36 @@ static struct omap_id omap_ids[] __initdata = {
 static void __iomem *tap_base;
 static u16 tap_prod_id;
 
-void __init omap24xx_check_revision(void)
+void omap_get_die_id(struct omap_die_id *odi)
+{
+	odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_0);
+	odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_1);
+	odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_2);
+	odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
+}
+
+static void __init omap24xx_check_revision(void)
 {
 	int i, j;
 	u32 idcode, prod_id;
 	u16 hawkeye;
 	u8  dev_type, rev;
+	struct omap_die_id odi;
 
 	idcode = read_tap_reg(OMAP_TAP_IDCODE);
 	prod_id = read_tap_reg(tap_prod_id);
 	hawkeye = (idcode >> 12) & 0xffff;
 	rev = (idcode >> 28) & 0x0f;
 	dev_type = (prod_id >> 16) & 0x0f;
+	omap_get_die_id(&odi);
 
 	pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
 		 idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
-	pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_0));
+	pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", odi.id_0);
 	pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_1),
-		 (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
-	pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_2));
-	pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_3));
+		 odi.id_1, (odi.id_1 >> 28) & 0xf);
+	pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", odi.id_2);
+	pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", odi.id_3);
 	pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
 		 prod_id, dev_type);
 
@@ -164,7 +173,7 @@ void __init omap24xx_check_revision(void)
 		omap3_features |= OMAP3_HAS_ ##feat;			\
 	}
 
-void __init omap3_check_features(void)
+static void __init omap3_check_features(void)
 {
 	u32 status;
 
@@ -179,6 +188,8 @@ void __init omap3_check_features(void)
 	OMAP3_CHECK_FEATURE(status, ISP);
 	if (cpu_is_omap3630())
 		omap3_features |= OMAP3_HAS_192MHZ_CLK;
+	if (!cpu_is_omap3505() && !cpu_is_omap3517())
+		omap3_features |= OMAP3_HAS_IO_WAKEUP;
 
 	/*
 	 * TODO: Get additional info (where applicable)
@@ -186,7 +197,7 @@ void __init omap3_check_features(void)
 	 */
 }
 
-void __init omap3_check_revision(void)
+static void __init omap3_check_revision(void)
 {
 	u32 cpuid, idcode;
 	u16 hawkeye;
@@ -259,20 +270,35 @@ void __init omap3_check_revision(void)
 		omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
 		break;
 	case 0xb891:
-	/* FALLTHROUGH */
+		/* Handle 36xx devices */
+		omap_chip.oc |= CHIP_IS_OMAP3630ES1;
+
+		switch(rev) {
+		case 0: /* Take care of early samples */
+			omap_revision = OMAP3630_REV_ES1_0;
+			break;
+		case 1:
+			omap_revision = OMAP3630_REV_ES1_1;
+			omap_chip.oc |= CHIP_IS_OMAP3630ES1_1;
+			break;
+		case 2:
+		default:
+			omap_revision =  OMAP3630_REV_ES1_2;
+			omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+		}
+		break;
 	default:
 		/* Unknown default to latest silicon rev as default*/
-		omap_revision = OMAP3630_REV_ES1_0;
-		omap_chip.oc |= CHIP_IS_OMAP3630ES1;
+		omap_revision =  OMAP3630_REV_ES1_2;
+		omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
 	}
 }
 
-void __init omap4_check_revision(void)
+static void __init omap4_check_revision(void)
 {
 	u32 idcode;
 	u16 hawkeye;
 	u8 rev;
-	char *rev_name = "ES1.0";
 
 	/*
 	 * The IC rev detection is done with hawkeye and rev.
@@ -283,21 +309,46 @@ void __init omap4_check_revision(void)
 	hawkeye = (idcode >> 12) & 0xffff;
 	rev = (idcode >> 28) & 0xff;
 
-	if ((hawkeye == 0xb852) && (rev == 0x0)) {
-		omap_revision = OMAP4430_REV_ES1_0;
-		omap_chip.oc |= CHIP_IS_OMAP4430ES1;
-		pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
-		return;
+	/*
+	 * Few initial ES2.0 samples IDCODE is same as ES1.0
+	 * Use ARM register to detect the correct ES version
+	 */
+	if (!rev) {
+		idcode = read_cpuid(CPUID_ID);
+		rev = (idcode & 0xf) - 1;
 	}
 
-	pr_err("Unknown OMAP4 CPU id\n");
+	switch (hawkeye) {
+	case 0xb852:
+		switch (rev) {
+		case 0:
+			omap_revision = OMAP4430_REV_ES1_0;
+			omap_chip.oc |= CHIP_IS_OMAP4430ES1;
+			break;
+		case 1:
+			omap_revision = OMAP4430_REV_ES2_0;
+			omap_chip.oc |= CHIP_IS_OMAP4430ES2;
+			break;
+		default:
+			omap_revision = OMAP4430_REV_ES2_0;
+			omap_chip.oc |= CHIP_IS_OMAP4430ES2;
+	}
+	break;
+	default:
+		/* Unknown default to latest silicon rev as default*/
+		omap_revision = OMAP4430_REV_ES2_0;
+		omap_chip.oc |= CHIP_IS_OMAP4430ES2;
+	}
+
+	pr_info("OMAP%04x ES%d.0\n",
+			omap_rev() >> 16, ((omap_rev() >> 12) & 0xf) + 1);
 }
 
 #define OMAP3_SHOW_FEATURE(feat)		\
 	if (omap3_has_ ##feat())		\
 		printk(#feat" ");
 
-void __init omap3_cpuinfo(void)
+static void __init omap3_cpuinfo(void)
 {
 	u8 rev = GET_OMAP_REVISION();
 	char cpu_name[16], cpu_rev[16];
@@ -335,24 +386,54 @@ void __init omap3_cpuinfo(void)
 		strcpy(cpu_name, "OMAP3503");
 	}
 
-	switch (rev) {
-	case OMAP_REVBITS_00:
-		strcpy(cpu_rev, "1.0");
-		break;
-	case OMAP_REVBITS_10:
-		strcpy(cpu_rev, "2.0");
-		break;
-	case OMAP_REVBITS_20:
-		strcpy(cpu_rev, "2.1");
-		break;
-	case OMAP_REVBITS_30:
-		strcpy(cpu_rev, "3.0");
-		break;
-	case OMAP_REVBITS_40:
-	/* FALLTHROUGH */
-	default:
-		/* Use the latest known revision as default */
-		strcpy(cpu_rev, "3.1");
+	if (cpu_is_omap3630()) {
+		switch (rev) {
+		case OMAP_REVBITS_00:
+			strcpy(cpu_rev, "1.0");
+			break;
+		case OMAP_REVBITS_01:
+			strcpy(cpu_rev, "1.1");
+			break;
+		case OMAP_REVBITS_02:
+			/* FALLTHROUGH */
+		default:
+			/* Use the latest known revision as default */
+			strcpy(cpu_rev, "1.2");
+		}
+	} else if (cpu_is_omap3505() || cpu_is_omap3517()) {
+		switch (rev) {
+		case OMAP_REVBITS_00:
+			strcpy(cpu_rev, "1.0");
+			break;
+		case OMAP_REVBITS_01:
+			/* FALLTHROUGH */
+		default:
+			/* Use the latest known revision as default */
+			strcpy(cpu_rev, "1.1");
+		}
+	} else {
+		switch (rev) {
+		case OMAP_REVBITS_00:
+			strcpy(cpu_rev, "1.0");
+			break;
+		case OMAP_REVBITS_01:
+			strcpy(cpu_rev, "2.0");
+			break;
+		case OMAP_REVBITS_02:
+			strcpy(cpu_rev, "2.1");
+			break;
+		case OMAP_REVBITS_03:
+			strcpy(cpu_rev, "3.0");
+			break;
+		case OMAP_REVBITS_04:
+			strcpy(cpu_rev, "3.1");
+			break;
+		case OMAP_REVBITS_05:
+			/* FALLTHROUGH */
+		default:
+			/* Use the latest known revision as default */
+			strcpy(cpu_rev, "3.1.2");
+		}
 	}
 
 	/* Print verbose information */
diff --git a/arch/arm/mach-omap2/include/mach/board-rx51.h b/arch/arm/mach-omap2/include/mach/board-rx51.h
new file mode 100644
index 000000000000..b76f49e7eed5
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/board-rx51.h
@@ -0,0 +1,11 @@
+/*
+ * Defines for rx51 boards
+ */
+
+#ifndef _OMAP_BOARD_RX51_H
+#define _OMAP_BOARD_RX51_H
+
+extern void __init rx51_peripherals_init(void);
+extern void __init rx51_video_mem_init(void);
+
+#endif
diff --git a/arch/arm/mach-omap2/include/mach/board-sdp.h b/arch/arm/mach-omap2/include/mach/board-sdp.h
deleted file mode 100644
index 465169c0908a..000000000000
--- a/arch/arm/mach-omap2/include/mach/board-sdp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  board-sdp.h
- *
- *  Information structures for SDP-specific board config data
- *
- *  Copyright (C) 2009 Nokia Corporation
- *  Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-struct flash_partitions {
-	struct mtd_partition *parts;
-	int nr_parts;
-};
-
-extern void sdp_flash_init(struct flash_partitions []);
diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h
index c93b29e21b78..f93ca3928c3b 100644
--- a/arch/arm/mach-omap2/include/mach/board-zoom.h
+++ b/arch/arm/mach-omap2/include/mach/board-zoom.h
@@ -1,5 +1,9 @@
 /*
  * Defines for zoom boards
  */
+#define ZOOM_NAND_CS    0
+
 extern int __init zoom_debugboard_init(void);
 extern void __init zoom_peripherals_init(void);
+
+#define ZOOM2_HEADSET_EXTMUTE_GPIO	153
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
new file mode 100644
index 000000000000..2f7ac70a20d8
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
@@ -0,0 +1,391 @@
+/*
+ * OMAP44xx CTRL_MODULE_CORE registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_CORE					0x4a002000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_CORE_IP_REVISION			0x0000
+#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO			0x0004
+#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG			0x0010
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0		0x0200
+#define OMAP4_CTRL_MODULE_CORE_ID_CODE				0x0204
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1		0x0208
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2		0x020c
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3		0x0210
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0		0x0214
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1		0x0218
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF		0x021c
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP		0x0228
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP		0x0260
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0		0x0264
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1		0x0268
+#define OMAP4_CTRL_MODULE_CORE_STATUS				0x02c4
+#define OMAP4_CTRL_MODULE_CORE_DEV_CONF				0x0300
+#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL		0x0314
+#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL		0x0318
+#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL		0x0320
+#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL		0x0324
+#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL	0x0328
+#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR			0x032c
+#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0		0x0330
+#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1		0x0334
+#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL			0x033c
+#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL			0x0340
+#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL			0x0350
+#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL		0x0400
+#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU			0x0408
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0		0x042c
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1		0x0430
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2		0x0434
+#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3		0x0438
+#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0			0x0440
+#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1			0x0444
+#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2			0x0448
+#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL		0x044c
+#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL		0x0450
+#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL		0x0454
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0		0x0480
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1		0x0484
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2		0x0488
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3		0x048c
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4		0x0490
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5		0x0494
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6		0x0498
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7		0x049c
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8		0x04a0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9		0x04a4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10		0x04a8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11		0x04ac
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12		0x04b0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13		0x04b4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14		0x04b8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15		0x04bc
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16		0x04c0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17		0x04c4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18		0x04c8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19		0x04cc
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20		0x04d0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21		0x04d4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22		0x04d8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23		0x04dc
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24		0x04e0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25		0x04e4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26		0x04e8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27		0x04ec
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28		0x04f0
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29		0x04f4
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30		0x04f8
+#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31		0x04fc
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT			30
+#define OMAP4_IP_REV_SCHEME_MASK			(0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT				16
+#define OMAP4_IP_REV_FUNC_MASK				(0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT				11
+#define OMAP4_IP_REV_RTL_MASK				(0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT			8
+#define OMAP4_IP_REV_MAJOR_MASK				(0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT			6
+#define OMAP4_IP_REV_CUSTOM_MASK			(0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT			0
+#define OMAP4_IP_REV_MINOR_MASK				(0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT				0
+#define OMAP4_IP_HWINFO_MASK				(0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT		2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK		(0x3 << 2)
+
+/* STD_FUSE_DIE_ID_0 */
+#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT			0
+#define OMAP4_STD_FUSE_DIE_ID_0_MASK			(0xffffffff << 0)
+
+/* ID_CODE */
+#define OMAP4_STD_FUSE_IDCODE_SHIFT			0
+#define OMAP4_STD_FUSE_IDCODE_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_DIE_ID_1 */
+#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT			0
+#define OMAP4_STD_FUSE_DIE_ID_1_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_DIE_ID_2 */
+#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT			0
+#define OMAP4_STD_FUSE_DIE_ID_2_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_DIE_ID_3 */
+#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT			0
+#define OMAP4_STD_FUSE_DIE_ID_3_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_PROD_ID_0 */
+#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT			0
+#define OMAP4_STD_FUSE_PROD_ID_0_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_PROD_ID_1 */
+#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT			0
+#define OMAP4_STD_FUSE_PROD_ID_1_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_USB_CONF */
+#define OMAP4_USB_PROD_ID_SHIFT				16
+#define OMAP4_USB_PROD_ID_MASK				(0xffff << 16)
+#define OMAP4_USB_VENDOR_ID_SHIFT			0
+#define OMAP4_USB_VENDOR_ID_MASK			(0xffff << 0)
+
+/* STD_FUSE_OPP_VDD_WKUP */
+#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT		0
+#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK		(0xffffffff << 0)
+
+/* STD_FUSE_OPP_BGAP */
+#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT			0
+#define OMAP4_STD_FUSE_OPP_BGAP_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_OPP_DPLL_0 */
+#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT			0
+#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK			(0xffffffff << 0)
+
+/* STD_FUSE_OPP_DPLL_1 */
+#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT			0
+#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK			(0xffffffff << 0)
+
+/* STATUS */
+#define OMAP4_ATTILA_CONF_SHIFT				11
+#define OMAP4_ATTILA_CONF_MASK				(0x3 << 11)
+#define OMAP4_DEVICE_TYPE_SHIFT				8
+#define OMAP4_DEVICE_TYPE_MASK				(0x7 << 8)
+#define OMAP4_SYS_BOOT_SHIFT				0
+#define OMAP4_SYS_BOOT_MASK				(0xff << 0)
+
+/* DEV_CONF */
+#define OMAP4_DEV_CONF_SHIFT				1
+#define OMAP4_DEV_CONF_MASK				(0x7fffffff << 1)
+#define OMAP4_USBPHY_PD_SHIFT				0
+#define OMAP4_USBPHY_PD_MASK				(1 << 0)
+
+/* LDOVBB_IVA_VOLTAGE_CTRL */
+#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT		26
+#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK		(1 << 26)
+#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT		21
+#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK		(0x1f << 21)
+#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT		16
+#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK		(0x1f << 16)
+#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT		10
+#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK		(1 << 10)
+#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT		5
+#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK		(0x1f << 5)
+#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT		0
+#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK		(0x1f << 0)
+
+/* LDOVBB_MPU_VOLTAGE_CTRL */
+#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT		26
+#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK		(1 << 26)
+#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT		21
+#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK		(0x1f << 21)
+#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT		16
+#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK		(0x1f << 16)
+#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT		10
+#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK		(1 << 10)
+#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT		5
+#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK		(0x1f << 5)
+#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT		0
+#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK		(0x1f << 0)
+
+/* LDOSRAM_IVA_VOLTAGE_CTRL */
+#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT		26
+#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK		(1 << 26)
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT		21
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK		(0x1f << 21)
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT		16
+#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK		(0x1f << 16)
+#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT		10
+#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK		(1 << 10)
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT		5
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK		(0x1f << 5)
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT		0
+#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
+
+/* LDOSRAM_MPU_VOLTAGE_CTRL */
+#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT		26
+#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK		(1 << 26)
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT		21
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK		(0x1f << 21)
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT		16
+#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK		(0x1f << 16)
+#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT		10
+#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK		(1 << 10)
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT		5
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK		(0x1f << 5)
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT		0
+#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
+
+/* LDOSRAM_CORE_VOLTAGE_CTRL */
+#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT	26
+#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK		(1 << 26)
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT		21
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK		(0x1f << 21)
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT	16
+#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK		(0x1f << 16)
+#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT	10
+#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK		(1 << 10)
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT		5
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK		(0x1f << 5)
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT	0
+#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK		(0x1f << 0)
+
+/* TEMP_SENSOR */
+#define OMAP4_BGAP_TEMPSOFF_SHIFT			12
+#define OMAP4_BGAP_TEMPSOFF_MASK			(1 << 12)
+#define OMAP4_BGAP_TSHUT_SHIFT				11
+#define OMAP4_BGAP_TSHUT_MASK				(1 << 11)
+#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT		10
+#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK		(1 << 10)
+#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT		9
+#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK			(1 << 9)
+#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT		8
+#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK		(1 << 8)
+#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT		0
+#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK		(0xff << 0)
+
+/* DPLL_NWELL_TRIM_0 */
+#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT	29
+#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK		(1 << 29)
+#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT			24
+#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK			(0x1f << 24)
+#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT	23
+#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK		(1 << 23)
+#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT			18
+#define OMAP4_DPLL_PER_NWELL_TRIM_MASK			(0x1f << 18)
+#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT	17
+#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK	(1 << 17)
+#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT		12
+#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK			(0x1f << 12)
+#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT	11
+#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK		(1 << 11)
+#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT			6
+#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK			(0x1f << 6)
+#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT	5
+#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK		(1 << 5)
+#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT			0
+#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK			(0x1f << 0)
+
+/* DPLL_NWELL_TRIM_1 */
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT	29
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK	(1 << 29)
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT		24
+#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK		(0x1f << 24)
+#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT	23
+#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK		(1 << 23)
+#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT			18
+#define OMAP4_DPLL_USB_NWELL_TRIM_MASK			(0x1f << 18)
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT	17
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK	(1 << 17)
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT		12
+#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK			(0x1f << 12)
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT	11
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK	(1 << 11)
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT		6
+#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK			(0x1f << 6)
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT	5
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK	(1 << 5)
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT		0
+#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK			(0x1f << 0)
+
+/* USBOTGHS_CONTROL */
+#define OMAP4_DISCHRGVBUS_SHIFT				8
+#define OMAP4_DISCHRGVBUS_MASK				(1 << 8)
+#define OMAP4_CHRGVBUS_SHIFT				7
+#define OMAP4_CHRGVBUS_MASK				(1 << 7)
+#define OMAP4_DRVVBUS_SHIFT				6
+#define OMAP4_DRVVBUS_MASK				(1 << 6)
+#define OMAP4_IDPULLUP_SHIFT				5
+#define OMAP4_IDPULLUP_MASK				(1 << 5)
+#define OMAP4_IDDIG_SHIFT				4
+#define OMAP4_IDDIG_MASK				(1 << 4)
+#define OMAP4_SESSEND_SHIFT				3
+#define OMAP4_SESSEND_MASK				(1 << 3)
+#define OMAP4_VBUSVALID_SHIFT				2
+#define OMAP4_VBUSVALID_MASK				(1 << 2)
+#define OMAP4_BVALID_SHIFT				1
+#define OMAP4_BVALID_MASK				(1 << 1)
+#define OMAP4_AVALID_SHIFT				0
+#define OMAP4_AVALID_MASK				(1 << 0)
+
+/* DSS_CONTROL */
+#define OMAP4_DSS_MUX6_SELECT_SHIFT			0
+#define OMAP4_DSS_MUX6_SELECT_MASK			(1 << 0)
+
+/* HWOBS_CONTROL */
+#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT			3
+#define OMAP4_HWOBS_CLKDIV_SEL_MASK			(0x1f << 3)
+#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT			2
+#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK			(1 << 2)
+#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT			1
+#define OMAP4_HWOBS_ALL_ONE_MODE_MASK			(1 << 1)
+#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT			0
+#define OMAP4_HWOBS_MACRO_ENABLE_MASK			(1 << 0)
+
+/* DEBOBS_FINAL_MUX_SEL */
+#define OMAP4_SELECT_SHIFT				0
+#define OMAP4_SELECT_MASK				(0xffffffff << 0)
+
+/* DEBOBS_MMR_MPU */
+#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT		0
+#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK		(0xf << 0)
+
+/* CONF_SDMA_REQ_SEL0 */
+#define OMAP4_MULT_SHIFT				0
+#define OMAP4_MULT_MASK					(0x7f << 0)
+
+/* CONF_CLK_SEL0 */
+#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT			0
+#define OMAP4_MULT_CONF_CLK_SEL0_MASK			(0x7 << 0)
+
+/* CONF_CLK_SEL1 */
+#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT			0
+#define OMAP4_MULT_CONF_CLK_SEL1_MASK			(0x7 << 0)
+
+/* CONF_CLK_SEL2 */
+#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT			0
+#define OMAP4_MULT_CONF_CLK_SEL2_MASK			(0x7 << 0)
+
+/* CONF_DPLL_FREQLOCK_SEL */
+#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT		0
+#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK		(0x7 << 0)
+
+/* CONF_DPLL_TINITZ_SEL */
+#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT		0
+#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK		(0x7 << 0)
+
+/* CONF_DPLL_PHASELOCK_SEL */
+#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT	0
+#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK		(0x7 << 0)
+
+/* CONF_DEBUG_SEL_TST_0 */
+#define OMAP4_MODE_SHIFT				0
+#define OMAP4_MODE_MASK					(0xf << 0)
+
+#endif
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
new file mode 100644
index 000000000000..c88420de1151
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
@@ -0,0 +1,1409 @@
+/*
+ * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_PAD_CORE				0x4a100000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION			0x0000
+#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO			0x0004
+#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG			0x0010
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0	0x01d8
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1	0x01dc
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2	0x01e0
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3	0x01e4
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4	0x01e8
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5	0x01ec
+#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6	0x01f0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL	0x05a0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE		0x05a4
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0	0x05a8
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1	0x05ac
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0	0x05b0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1	0x05b4
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0	0x05b8
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1	0x05bc
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2	0x05c0
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC		0x05c4
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS		0x05c8
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE		0x0600
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0		0x0604
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX		0x0608
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC		0x060c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY		0x0610
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2			0x0614
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY		0x0618
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP		0x061c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE		0x0620
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1		0x0624
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1			0x0628
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI			0x062c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB			0x0630
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ			0x0634
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0		0x0638
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1		0x063c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2		0x0640
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3		0x0644
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0		0x0648
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1		0x064c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2		0x0650
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3		0x0654
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD		0x0658
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C			0x065c
+#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW	0x0660
+#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R		0x0664
+#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0	0x0668
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1		0x0700
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2		0x0704
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3		0x0708
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4		0x070c
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT				30
+#define OMAP4_IP_REV_SCHEME_MASK				(0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT					16
+#define OMAP4_IP_REV_FUNC_MASK					(0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT					11
+#define OMAP4_IP_REV_RTL_MASK					(0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT				8
+#define OMAP4_IP_REV_MAJOR_MASK					(0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT				6
+#define OMAP4_IP_REV_CUSTOM_MASK				(0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT				0
+#define OMAP4_IP_REV_MINOR_MASK					(0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT					0
+#define OMAP4_IP_HWINFO_MASK					(0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT			2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK			(0x3 << 2)
+
+/* PADCONF_WAKEUPEVENT_0 */
+#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT		31
+#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT		29
+#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
+#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT		28
+#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT		27
+#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
+#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT		26
+#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
+#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT		25
+#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
+#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT		16
+#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
+#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT		3
+#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_1 */
+#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT		31
+#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT		29
+#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
+#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT		28
+#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT		27
+#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
+#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT		26
+#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
+#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT		25
+#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
+#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT		16
+#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
+#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT		3
+#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_2 */
+#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT	31
+#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT		29
+#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
+#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT		28
+#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT	27
+#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
+#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT		26
+#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
+#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT		25
+#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
+#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT		16
+#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
+#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT	14
+#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK	(1 << 14)
+#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT	13
+#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT	12
+#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK	(1 << 12)
+#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT	11
+#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK	(1 << 11)
+#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT	10
+#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK	(1 << 10)
+#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT	9
+#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK	(1 << 9)
+#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT	8
+#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK	(1 << 8)
+#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT	7
+#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK	(1 << 7)
+#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT	6
+#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK	(1 << 6)
+#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT	5
+#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK	(1 << 5)
+#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT	4
+#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK	(1 << 4)
+#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT	3
+#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK	(1 << 3)
+#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT	2
+#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK	(1 << 2)
+#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT	1
+#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK	(1 << 1)
+#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT	0
+#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_3 */
+#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT		31
+#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT		29
+#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
+#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT		28
+#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT		27
+#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
+#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT		26
+#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
+#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT		25
+#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
+#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT		16
+#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK			(1 << 16)
+#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT	4
+#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT	3
+#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_4 */
+#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT		31
+#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT	29
+#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK	(1 << 29)
+#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT	28
+#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT	27
+#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK	(1 << 27)
+#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT	26
+#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK	(1 << 26)
+#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT	25
+#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK	(1 << 25)
+#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT	24
+#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK	(1 << 24)
+#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT	23
+#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK	(1 << 23)
+#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT	22
+#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK	(1 << 22)
+#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT	21
+#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK	(1 << 21)
+#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT	20
+#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK	(1 << 20)
+#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT	19
+#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK	(1 << 19)
+#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT	18
+#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK	(1 << 18)
+#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT	17
+#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK	(1 << 17)
+#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT	16
+#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK	(1 << 16)
+#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT		3
+#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_5 */
+#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT		31
+#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK		(1 << 31)
+#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT		30
+#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK		(1 << 30)
+#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT		29
+#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK		(1 << 29)
+#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT		28
+#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK		(1 << 28)
+#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT		27
+#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK		(1 << 27)
+#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT		26
+#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK		(1 << 26)
+#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT		25
+#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK		(1 << 25)
+#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT		16
+#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK		(1 << 16)
+#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK		(1 << 13)
+#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT		3
+#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* PADCONF_WAKEUPEVENT_6 */
+#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT		6
+#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK		(1 << 6)
+#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT		5
+#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK		(1 << 5)
+#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT		3
+#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK		(1 << 3)
+#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK		(1 << 1)
+#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT		0
+#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK		(1 << 0)
+
+/* CONTROL_PADCONF_GLOBAL */
+#define OMAP4_FORCE_OFFMODE_EN_SHIFT				31
+#define OMAP4_FORCE_OFFMODE_EN_MASK				(1 << 31)
+
+/* CONTROL_PADCONF_MODE */
+#define OMAP4_VDDS_DV_BANK0_SHIFT				31
+#define OMAP4_VDDS_DV_BANK0_MASK				(1 << 31)
+#define OMAP4_VDDS_DV_BANK1_SHIFT				30
+#define OMAP4_VDDS_DV_BANK1_MASK				(1 << 30)
+#define OMAP4_VDDS_DV_BANK3_SHIFT				29
+#define OMAP4_VDDS_DV_BANK3_MASK				(1 << 29)
+#define OMAP4_VDDS_DV_BANK4_SHIFT				28
+#define OMAP4_VDDS_DV_BANK4_MASK				(1 << 28)
+#define OMAP4_VDDS_DV_BANK5_SHIFT				27
+#define OMAP4_VDDS_DV_BANK5_MASK				(1 << 27)
+#define OMAP4_VDDS_DV_BANK6_SHIFT				26
+#define OMAP4_VDDS_DV_BANK6_MASK				(1 << 26)
+#define OMAP4_VDDS_DV_C2C_SHIFT					25
+#define OMAP4_VDDS_DV_C2C_MASK					(1 << 25)
+#define OMAP4_VDDS_DV_CAM_SHIFT					24
+#define OMAP4_VDDS_DV_CAM_MASK					(1 << 24)
+#define OMAP4_VDDS_DV_GPMC_SHIFT				23
+#define OMAP4_VDDS_DV_GPMC_MASK					(1 << 23)
+#define OMAP4_VDDS_DV_SDMMC2_SHIFT				22
+#define OMAP4_VDDS_DV_SDMMC2_MASK				(1 << 22)
+
+/* CONTROL_SMART1IO_PADCONF_0 */
+#define OMAP4_ABE_DR0_SC_SHIFT					30
+#define OMAP4_ABE_DR0_SC_MASK					(0x3 << 30)
+#define OMAP4_CAM_DR0_SC_SHIFT					28
+#define OMAP4_CAM_DR0_SC_MASK					(0x3 << 28)
+#define OMAP4_FREF_DR2_SC_SHIFT					26
+#define OMAP4_FREF_DR2_SC_MASK					(0x3 << 26)
+#define OMAP4_FREF_DR3_SC_SHIFT					24
+#define OMAP4_FREF_DR3_SC_MASK					(0x3 << 24)
+#define OMAP4_GPIO_DR8_SC_SHIFT					22
+#define OMAP4_GPIO_DR8_SC_MASK					(0x3 << 22)
+#define OMAP4_GPIO_DR9_SC_SHIFT					20
+#define OMAP4_GPIO_DR9_SC_MASK					(0x3 << 20)
+#define OMAP4_GPMC_DR2_SC_SHIFT					18
+#define OMAP4_GPMC_DR2_SC_MASK					(0x3 << 18)
+#define OMAP4_GPMC_DR3_SC_SHIFT					16
+#define OMAP4_GPMC_DR3_SC_MASK					(0x3 << 16)
+#define OMAP4_GPMC_DR6_SC_SHIFT					14
+#define OMAP4_GPMC_DR6_SC_MASK					(0x3 << 14)
+#define OMAP4_HDMI_DR0_SC_SHIFT					12
+#define OMAP4_HDMI_DR0_SC_MASK					(0x3 << 12)
+#define OMAP4_MCSPI1_DR0_SC_SHIFT				10
+#define OMAP4_MCSPI1_DR0_SC_MASK				(0x3 << 10)
+#define OMAP4_UART1_DR0_SC_SHIFT				8
+#define OMAP4_UART1_DR0_SC_MASK					(0x3 << 8)
+#define OMAP4_UART3_DR0_SC_SHIFT				6
+#define OMAP4_UART3_DR0_SC_MASK					(0x3 << 6)
+#define OMAP4_UART3_DR1_SC_SHIFT				4
+#define OMAP4_UART3_DR1_SC_MASK					(0x3 << 4)
+#define OMAP4_UNIPRO_DR0_SC_SHIFT				2
+#define OMAP4_UNIPRO_DR0_SC_MASK				(0x3 << 2)
+#define OMAP4_UNIPRO_DR1_SC_SHIFT				0
+#define OMAP4_UNIPRO_DR1_SC_MASK				(0x3 << 0)
+
+/* CONTROL_SMART1IO_PADCONF_1 */
+#define OMAP4_ABE_DR0_LB_SHIFT					30
+#define OMAP4_ABE_DR0_LB_MASK					(0x3 << 30)
+#define OMAP4_CAM_DR0_LB_SHIFT					28
+#define OMAP4_CAM_DR0_LB_MASK					(0x3 << 28)
+#define OMAP4_FREF_DR2_LB_SHIFT					26
+#define OMAP4_FREF_DR2_LB_MASK					(0x3 << 26)
+#define OMAP4_FREF_DR3_LB_SHIFT					24
+#define OMAP4_FREF_DR3_LB_MASK					(0x3 << 24)
+#define OMAP4_GPIO_DR8_LB_SHIFT					22
+#define OMAP4_GPIO_DR8_LB_MASK					(0x3 << 22)
+#define OMAP4_GPIO_DR9_LB_SHIFT					20
+#define OMAP4_GPIO_DR9_LB_MASK					(0x3 << 20)
+#define OMAP4_GPMC_DR2_LB_SHIFT					18
+#define OMAP4_GPMC_DR2_LB_MASK					(0x3 << 18)
+#define OMAP4_GPMC_DR3_LB_SHIFT					16
+#define OMAP4_GPMC_DR3_LB_MASK					(0x3 << 16)
+#define OMAP4_GPMC_DR6_LB_SHIFT					14
+#define OMAP4_GPMC_DR6_LB_MASK					(0x3 << 14)
+#define OMAP4_HDMI_DR0_LB_SHIFT					12
+#define OMAP4_HDMI_DR0_LB_MASK					(0x3 << 12)
+#define OMAP4_MCSPI1_DR0_LB_SHIFT				10
+#define OMAP4_MCSPI1_DR0_LB_MASK				(0x3 << 10)
+#define OMAP4_UART1_DR0_LB_SHIFT				8
+#define OMAP4_UART1_DR0_LB_MASK					(0x3 << 8)
+#define OMAP4_UART3_DR0_LB_SHIFT				6
+#define OMAP4_UART3_DR0_LB_MASK					(0x3 << 6)
+#define OMAP4_UART3_DR1_LB_SHIFT				4
+#define OMAP4_UART3_DR1_LB_MASK					(0x3 << 4)
+#define OMAP4_UNIPRO_DR0_LB_SHIFT				2
+#define OMAP4_UNIPRO_DR0_LB_MASK				(0x3 << 2)
+#define OMAP4_UNIPRO_DR1_LB_SHIFT				0
+#define OMAP4_UNIPRO_DR1_LB_MASK				(0x3 << 0)
+
+/* CONTROL_SMART2IO_PADCONF_0 */
+#define OMAP4_C2C_DR0_LB_SHIFT					31
+#define OMAP4_C2C_DR0_LB_MASK					(1 << 31)
+#define OMAP4_DPM_DR1_LB_SHIFT					30
+#define OMAP4_DPM_DR1_LB_MASK					(1 << 30)
+#define OMAP4_DPM_DR2_LB_SHIFT					29
+#define OMAP4_DPM_DR2_LB_MASK					(1 << 29)
+#define OMAP4_DPM_DR3_LB_SHIFT					28
+#define OMAP4_DPM_DR3_LB_MASK					(1 << 28)
+#define OMAP4_GPIO_DR0_LB_SHIFT					27
+#define OMAP4_GPIO_DR0_LB_MASK					(1 << 27)
+#define OMAP4_GPIO_DR1_LB_SHIFT					26
+#define OMAP4_GPIO_DR1_LB_MASK					(1 << 26)
+#define OMAP4_GPIO_DR10_LB_SHIFT				25
+#define OMAP4_GPIO_DR10_LB_MASK					(1 << 25)
+#define OMAP4_GPIO_DR2_LB_SHIFT					24
+#define OMAP4_GPIO_DR2_LB_MASK					(1 << 24)
+#define OMAP4_GPMC_DR0_LB_SHIFT					23
+#define OMAP4_GPMC_DR0_LB_MASK					(1 << 23)
+#define OMAP4_GPMC_DR1_LB_SHIFT					22
+#define OMAP4_GPMC_DR1_LB_MASK					(1 << 22)
+#define OMAP4_GPMC_DR4_LB_SHIFT					21
+#define OMAP4_GPMC_DR4_LB_MASK					(1 << 21)
+#define OMAP4_GPMC_DR5_LB_SHIFT					20
+#define OMAP4_GPMC_DR5_LB_MASK					(1 << 20)
+#define OMAP4_GPMC_DR7_LB_SHIFT					19
+#define OMAP4_GPMC_DR7_LB_MASK					(1 << 19)
+#define OMAP4_HSI2_DR0_LB_SHIFT					18
+#define OMAP4_HSI2_DR0_LB_MASK					(1 << 18)
+#define OMAP4_HSI2_DR1_LB_SHIFT					17
+#define OMAP4_HSI2_DR1_LB_MASK					(1 << 17)
+#define OMAP4_HSI2_DR2_LB_SHIFT					16
+#define OMAP4_HSI2_DR2_LB_MASK					(1 << 16)
+#define OMAP4_KPD_DR0_LB_SHIFT					15
+#define OMAP4_KPD_DR0_LB_MASK					(1 << 15)
+#define OMAP4_KPD_DR1_LB_SHIFT					14
+#define OMAP4_KPD_DR1_LB_MASK					(1 << 14)
+#define OMAP4_PDM_DR0_LB_SHIFT					13
+#define OMAP4_PDM_DR0_LB_MASK					(1 << 13)
+#define OMAP4_SDMMC2_DR0_LB_SHIFT				12
+#define OMAP4_SDMMC2_DR0_LB_MASK				(1 << 12)
+#define OMAP4_SDMMC3_DR0_LB_SHIFT				11
+#define OMAP4_SDMMC3_DR0_LB_MASK				(1 << 11)
+#define OMAP4_SDMMC4_DR0_LB_SHIFT				10
+#define OMAP4_SDMMC4_DR0_LB_MASK				(1 << 10)
+#define OMAP4_SDMMC4_DR1_LB_SHIFT				9
+#define OMAP4_SDMMC4_DR1_LB_MASK				(1 << 9)
+#define OMAP4_SPI3_DR0_LB_SHIFT					8
+#define OMAP4_SPI3_DR0_LB_MASK					(1 << 8)
+#define OMAP4_SPI3_DR1_LB_SHIFT					7
+#define OMAP4_SPI3_DR1_LB_MASK					(1 << 7)
+#define OMAP4_UART3_DR2_LB_SHIFT				6
+#define OMAP4_UART3_DR2_LB_MASK					(1 << 6)
+#define OMAP4_UART3_DR3_LB_SHIFT				5
+#define OMAP4_UART3_DR3_LB_MASK					(1 << 5)
+#define OMAP4_UART3_DR4_LB_SHIFT				4
+#define OMAP4_UART3_DR4_LB_MASK					(1 << 4)
+#define OMAP4_UART3_DR5_LB_SHIFT				3
+#define OMAP4_UART3_DR5_LB_MASK					(1 << 3)
+#define OMAP4_USBA0_DR1_LB_SHIFT				2
+#define OMAP4_USBA0_DR1_LB_MASK					(1 << 2)
+#define OMAP4_USBA_DR2_LB_SHIFT					1
+#define OMAP4_USBA_DR2_LB_MASK					(1 << 1)
+
+/* CONTROL_SMART2IO_PADCONF_1 */
+#define OMAP4_USBB1_DR0_LB_SHIFT				31
+#define OMAP4_USBB1_DR0_LB_MASK					(1 << 31)
+#define OMAP4_USBB2_DR0_LB_SHIFT				30
+#define OMAP4_USBB2_DR0_LB_MASK					(1 << 30)
+#define OMAP4_USBA0_DR0_LB_SHIFT				29
+#define OMAP4_USBA0_DR0_LB_MASK					(1 << 29)
+
+/* CONTROL_SMART3IO_PADCONF_0 */
+#define OMAP4_DMIC_DR0_MB_SHIFT					30
+#define OMAP4_DMIC_DR0_MB_MASK					(0x3 << 30)
+#define OMAP4_GPIO_DR3_MB_SHIFT					28
+#define OMAP4_GPIO_DR3_MB_MASK					(0x3 << 28)
+#define OMAP4_GPIO_DR4_MB_SHIFT					26
+#define OMAP4_GPIO_DR4_MB_MASK					(0x3 << 26)
+#define OMAP4_GPIO_DR5_MB_SHIFT					24
+#define OMAP4_GPIO_DR5_MB_MASK					(0x3 << 24)
+#define OMAP4_GPIO_DR6_MB_SHIFT					22
+#define OMAP4_GPIO_DR6_MB_MASK					(0x3 << 22)
+#define OMAP4_HSI_DR1_MB_SHIFT					20
+#define OMAP4_HSI_DR1_MB_MASK					(0x3 << 20)
+#define OMAP4_HSI_DR2_MB_SHIFT					18
+#define OMAP4_HSI_DR2_MB_MASK					(0x3 << 18)
+#define OMAP4_HSI_DR3_MB_SHIFT					16
+#define OMAP4_HSI_DR3_MB_MASK					(0x3 << 16)
+#define OMAP4_MCBSP2_DR0_MB_SHIFT				14
+#define OMAP4_MCBSP2_DR0_MB_MASK				(0x3 << 14)
+#define OMAP4_MCSPI4_DR0_MB_SHIFT				12
+#define OMAP4_MCSPI4_DR0_MB_MASK				(0x3 << 12)
+#define OMAP4_MCSPI4_DR1_MB_SHIFT				10
+#define OMAP4_MCSPI4_DR1_MB_MASK				(0x3 << 10)
+#define OMAP4_SDMMC3_DR0_MB_SHIFT				8
+#define OMAP4_SDMMC3_DR0_MB_MASK				(0x3 << 8)
+#define OMAP4_SPI2_DR0_MB_SHIFT					0
+#define OMAP4_SPI2_DR0_MB_MASK					(0x3 << 0)
+
+/* CONTROL_SMART3IO_PADCONF_1 */
+#define OMAP4_SPI2_DR1_MB_SHIFT					30
+#define OMAP4_SPI2_DR1_MB_MASK					(0x3 << 30)
+#define OMAP4_SPI2_DR2_MB_SHIFT					28
+#define OMAP4_SPI2_DR2_MB_MASK					(0x3 << 28)
+#define OMAP4_UART2_DR0_MB_SHIFT				26
+#define OMAP4_UART2_DR0_MB_MASK					(0x3 << 26)
+#define OMAP4_UART2_DR1_MB_SHIFT				24
+#define OMAP4_UART2_DR1_MB_MASK					(0x3 << 24)
+#define OMAP4_UART4_DR0_MB_SHIFT				22
+#define OMAP4_UART4_DR0_MB_MASK					(0x3 << 22)
+#define OMAP4_HSI_DR0_MB_SHIFT					20
+#define OMAP4_HSI_DR0_MB_MASK					(0x3 << 20)
+
+/* CONTROL_SMART3IO_PADCONF_2 */
+#define OMAP4_DMIC_DR0_LB_SHIFT					31
+#define OMAP4_DMIC_DR0_LB_MASK					(1 << 31)
+#define OMAP4_GPIO_DR3_LB_SHIFT					30
+#define OMAP4_GPIO_DR3_LB_MASK					(1 << 30)
+#define OMAP4_GPIO_DR4_LB_SHIFT					29
+#define OMAP4_GPIO_DR4_LB_MASK					(1 << 29)
+#define OMAP4_GPIO_DR5_LB_SHIFT					28
+#define OMAP4_GPIO_DR5_LB_MASK					(1 << 28)
+#define OMAP4_GPIO_DR6_LB_SHIFT					27
+#define OMAP4_GPIO_DR6_LB_MASK					(1 << 27)
+#define OMAP4_HSI_DR1_LB_SHIFT					26
+#define OMAP4_HSI_DR1_LB_MASK					(1 << 26)
+#define OMAP4_HSI_DR2_LB_SHIFT					25
+#define OMAP4_HSI_DR2_LB_MASK					(1 << 25)
+#define OMAP4_HSI_DR3_LB_SHIFT					24
+#define OMAP4_HSI_DR3_LB_MASK					(1 << 24)
+#define OMAP4_MCBSP2_DR0_LB_SHIFT				23
+#define OMAP4_MCBSP2_DR0_LB_MASK				(1 << 23)
+#define OMAP4_MCSPI4_DR0_LB_SHIFT				22
+#define OMAP4_MCSPI4_DR0_LB_MASK				(1 << 22)
+#define OMAP4_MCSPI4_DR1_LB_SHIFT				21
+#define OMAP4_MCSPI4_DR1_LB_MASK				(1 << 21)
+#define OMAP4_SLIMBUS2_DR0_LB_SHIFT				18
+#define OMAP4_SLIMBUS2_DR0_LB_MASK				(1 << 18)
+#define OMAP4_SPI2_DR0_LB_SHIFT					16
+#define OMAP4_SPI2_DR0_LB_MASK					(1 << 16)
+#define OMAP4_SPI2_DR1_LB_SHIFT					15
+#define OMAP4_SPI2_DR1_LB_MASK					(1 << 15)
+#define OMAP4_SPI2_DR2_LB_SHIFT					14
+#define OMAP4_SPI2_DR2_LB_MASK					(1 << 14)
+#define OMAP4_UART2_DR0_LB_SHIFT				13
+#define OMAP4_UART2_DR0_LB_MASK					(1 << 13)
+#define OMAP4_UART2_DR1_LB_SHIFT				12
+#define OMAP4_UART2_DR1_LB_MASK					(1 << 12)
+#define OMAP4_UART4_DR0_LB_SHIFT				11
+#define OMAP4_UART4_DR0_LB_MASK					(1 << 11)
+#define OMAP4_HSI_DR0_LB_SHIFT					10
+#define OMAP4_HSI_DR0_LB_MASK					(1 << 10)
+
+/* CONTROL_USBB_HSIC */
+#define OMAP4_USBB2_DR1_SR_SHIFT				30
+#define OMAP4_USBB2_DR1_SR_MASK					(0x3 << 30)
+#define OMAP4_USBB2_DR1_I_SHIFT					27
+#define OMAP4_USBB2_DR1_I_MASK					(0x7 << 27)
+#define OMAP4_USBB1_DR1_SR_SHIFT				25
+#define OMAP4_USBB1_DR1_SR_MASK					(0x3 << 25)
+#define OMAP4_USBB1_DR1_I_SHIFT					22
+#define OMAP4_USBB1_DR1_I_MASK					(0x7 << 22)
+#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT				20
+#define OMAP4_USBB1_HSIC_DATA_WD_MASK				(0x3 << 20)
+#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT			18
+#define OMAP4_USBB1_HSIC_STROBE_WD_MASK				(0x3 << 18)
+#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT				16
+#define OMAP4_USBB2_HSIC_DATA_WD_MASK				(0x3 << 16)
+#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT			14
+#define OMAP4_USBB2_HSIC_STROBE_WD_MASK				(0x3 << 14)
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT		13
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK		(1 << 13)
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT			11
+#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK			(0x3 << 11)
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT		10
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK		(1 << 10)
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT		8
+#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK			(0x3 << 8)
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT		7
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK		(1 << 7)
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT			5
+#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK			(0x3 << 5)
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT		4
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK		(1 << 4)
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT		2
+#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK			(0x3 << 2)
+
+/* CONTROL_SLIMBUS */
+#define OMAP4_SLIMBUS1_DR0_MB_SHIFT				30
+#define OMAP4_SLIMBUS1_DR0_MB_MASK				(0x3 << 30)
+#define OMAP4_SLIMBUS1_DR1_MB_SHIFT				28
+#define OMAP4_SLIMBUS1_DR1_MB_MASK				(0x3 << 28)
+#define OMAP4_SLIMBUS2_DR0_MB_SHIFT				26
+#define OMAP4_SLIMBUS2_DR0_MB_MASK				(0x3 << 26)
+#define OMAP4_SLIMBUS2_DR1_MB_SHIFT				24
+#define OMAP4_SLIMBUS2_DR1_MB_MASK				(0x3 << 24)
+#define OMAP4_SLIMBUS2_DR2_MB_SHIFT				22
+#define OMAP4_SLIMBUS2_DR2_MB_MASK				(0x3 << 22)
+#define OMAP4_SLIMBUS2_DR3_MB_SHIFT				20
+#define OMAP4_SLIMBUS2_DR3_MB_MASK				(0x3 << 20)
+#define OMAP4_SLIMBUS1_DR0_LB_SHIFT				19
+#define OMAP4_SLIMBUS1_DR0_LB_MASK				(1 << 19)
+#define OMAP4_SLIMBUS2_DR1_LB_SHIFT				18
+#define OMAP4_SLIMBUS2_DR1_LB_MASK				(1 << 18)
+
+/* CONTROL_PBIASLITE */
+#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT			31
+#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK			(1 << 31)
+#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT		30
+#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK			(1 << 30)
+#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT			29
+#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK			(1 << 29)
+#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT			28
+#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK			(1 << 28)
+#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT			27
+#define OMAP4_USIM_PBIASLITE_VMODE_MASK				(1 << 27)
+#define OMAP4_MMC1_PWRDNZ_SHIFT					26
+#define OMAP4_MMC1_PWRDNZ_MASK					(1 << 26)
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT			25
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK			(1 << 25)
+#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT		24
+#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK			(1 << 24)
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT			23
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK			(1 << 23)
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT			22
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK			(1 << 22)
+#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT			21
+#define OMAP4_MMC1_PBIASLITE_VMODE_MASK				(1 << 21)
+#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT				20
+#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK				(1 << 20)
+
+/* CONTROL_I2C_0 */
+#define OMAP4_I2C4_SDA_GLFENB_SHIFT				31
+#define OMAP4_I2C4_SDA_GLFENB_MASK				(1 << 31)
+#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT				29
+#define OMAP4_I2C4_SDA_LOAD_BITS_MASK				(0x3 << 29)
+#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT				28
+#define OMAP4_I2C4_SDA_PULLUPRESX_MASK				(1 << 28)
+#define OMAP4_I2C3_SDA_GLFENB_SHIFT				27
+#define OMAP4_I2C3_SDA_GLFENB_MASK				(1 << 27)
+#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT				25
+#define OMAP4_I2C3_SDA_LOAD_BITS_MASK				(0x3 << 25)
+#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT				24
+#define OMAP4_I2C3_SDA_PULLUPRESX_MASK				(1 << 24)
+#define OMAP4_I2C2_SDA_GLFENB_SHIFT				23
+#define OMAP4_I2C2_SDA_GLFENB_MASK				(1 << 23)
+#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT				21
+#define OMAP4_I2C2_SDA_LOAD_BITS_MASK				(0x3 << 21)
+#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT				20
+#define OMAP4_I2C2_SDA_PULLUPRESX_MASK				(1 << 20)
+#define OMAP4_I2C1_SDA_GLFENB_SHIFT				19
+#define OMAP4_I2C1_SDA_GLFENB_MASK				(1 << 19)
+#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT				17
+#define OMAP4_I2C1_SDA_LOAD_BITS_MASK				(0x3 << 17)
+#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT				16
+#define OMAP4_I2C1_SDA_PULLUPRESX_MASK				(1 << 16)
+#define OMAP4_I2C4_SCL_GLFENB_SHIFT				15
+#define OMAP4_I2C4_SCL_GLFENB_MASK				(1 << 15)
+#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT				13
+#define OMAP4_I2C4_SCL_LOAD_BITS_MASK				(0x3 << 13)
+#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT				12
+#define OMAP4_I2C4_SCL_PULLUPRESX_MASK				(1 << 12)
+#define OMAP4_I2C3_SCL_GLFENB_SHIFT				11
+#define OMAP4_I2C3_SCL_GLFENB_MASK				(1 << 11)
+#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT				9
+#define OMAP4_I2C3_SCL_LOAD_BITS_MASK				(0x3 << 9)
+#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT				8
+#define OMAP4_I2C3_SCL_PULLUPRESX_MASK				(1 << 8)
+#define OMAP4_I2C2_SCL_GLFENB_SHIFT				7
+#define OMAP4_I2C2_SCL_GLFENB_MASK				(1 << 7)
+#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT				5
+#define OMAP4_I2C2_SCL_LOAD_BITS_MASK				(0x3 << 5)
+#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT				4
+#define OMAP4_I2C2_SCL_PULLUPRESX_MASK				(1 << 4)
+#define OMAP4_I2C1_SCL_GLFENB_SHIFT				3
+#define OMAP4_I2C1_SCL_GLFENB_MASK				(1 << 3)
+#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT				1
+#define OMAP4_I2C1_SCL_LOAD_BITS_MASK				(0x3 << 1)
+#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT				0
+#define OMAP4_I2C1_SCL_PULLUPRESX_MASK				(1 << 0)
+
+/* CONTROL_CAMERA_RX */
+#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT			31
+#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK			(1 << 31)
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT			29
+#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK			(0x3 << 29)
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT			24
+#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK			(0x1f << 24)
+#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT			22
+#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK			(0x3 << 22)
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT			21
+#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK			(1 << 21)
+#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT			19
+#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK			(0x3 << 19)
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT			18
+#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK			(1 << 18)
+#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT			16
+#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK			(0x3 << 16)
+
+/* CONTROL_AVDAC */
+#define OMAP4_AVDAC_ACEN_SHIFT					31
+#define OMAP4_AVDAC_ACEN_MASK					(1 << 31)
+#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT				30
+#define OMAP4_AVDAC_TVOUTBYPASS_MASK				(1 << 30)
+#define OMAP4_AVDAC_INPUTINV_SHIFT				29
+#define OMAP4_AVDAC_INPUTINV_MASK				(1 << 29)
+#define OMAP4_AVDAC_CTL_SHIFT					13
+#define OMAP4_AVDAC_CTL_MASK					(0xffff << 13)
+#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT				12
+#define OMAP4_AVDAC_CTL_WR_ACK_MASK				(1 << 12)
+
+/* CONTROL_HDMI_TX_PHY */
+#define OMAP4_HDMITXPHY_PADORDER_SHIFT				31
+#define OMAP4_HDMITXPHY_PADORDER_MASK				(1 << 31)
+#define OMAP4_HDMITXPHY_TXVALID_SHIFT				30
+#define OMAP4_HDMITXPHY_TXVALID_MASK				(1 << 30)
+#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT			29
+#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK			(1 << 29)
+#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT			28
+#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK			(1 << 28)
+
+/* CONTROL_MMC2 */
+#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT			31
+#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK			(1 << 31)
+
+/* CONTROL_DSIPHY */
+#define OMAP4_DSI2_LANEENABLE_SHIFT				29
+#define OMAP4_DSI2_LANEENABLE_MASK				(0x7 << 29)
+#define OMAP4_DSI1_LANEENABLE_SHIFT				24
+#define OMAP4_DSI1_LANEENABLE_MASK				(0x1f << 24)
+#define OMAP4_DSI1_PIPD_SHIFT					19
+#define OMAP4_DSI1_PIPD_MASK					(0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT					14
+#define OMAP4_DSI2_PIPD_MASK					(0x1f << 14)
+
+/* CONTROL_MCBSPLP */
+#define OMAP4_ALBCTRLRX_FSX_SHIFT				31
+#define OMAP4_ALBCTRLRX_FSX_MASK				(1 << 31)
+#define OMAP4_ALBCTRLRX_CLKX_SHIFT				30
+#define OMAP4_ALBCTRLRX_CLKX_MASK				(1 << 30)
+#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT				29
+#define OMAP4_ABE_MCBSP1_DR_EN_MASK				(1 << 29)
+
+/* CONTROL_USB2PHYCORE */
+#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT			31
+#define OMAP4_USB2PHY_AUTORESUME_EN_MASK			(1 << 31)
+#define OMAP4_USB2PHY_DISCHGDET_SHIFT				30
+#define OMAP4_USB2PHY_DISCHGDET_MASK				(1 << 30)
+#define OMAP4_USB2PHY_GPIOMODE_SHIFT				29
+#define OMAP4_USB2PHY_GPIOMODE_MASK				(1 << 29)
+#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT			28
+#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK			(1 << 28)
+#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT			27
+#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK			(1 << 27)
+#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT			26
+#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK			(1 << 26)
+#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT				25
+#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK				(1 << 25)
+#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT			24
+#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK				(1 << 24)
+#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT			21
+#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK			(0x7 << 21)
+#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT			20
+#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK			(1 << 20)
+#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT			19
+#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK			(1 << 19)
+#define OMAP4_USB2PHY_DATADET_SHIFT				18
+#define OMAP4_USB2PHY_DATADET_MASK				(1 << 18)
+#define OMAP4_USB2PHY_SINKONDP_SHIFT				17
+#define OMAP4_USB2PHY_SINKONDP_MASK				(1 << 17)
+#define OMAP4_USB2PHY_SRCONDM_SHIFT				16
+#define OMAP4_USB2PHY_SRCONDM_MASK				(1 << 16)
+#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT			15
+#define OMAP4_USB2PHY_RESTARTCHGDET_MASK			(1 << 15)
+#define OMAP4_USB2PHY_CHGDETDONE_SHIFT				14
+#define OMAP4_USB2PHY_CHGDETDONE_MASK				(1 << 14)
+#define OMAP4_USB2PHY_CHGDETECTED_SHIFT				13
+#define OMAP4_USB2PHY_CHGDETECTED_MASK				(1 << 13)
+#define OMAP4_USB2PHY_MCPCPUEN_SHIFT				12
+#define OMAP4_USB2PHY_MCPCPUEN_MASK				(1 << 12)
+#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT				11
+#define OMAP4_USB2PHY_MCPCMODEEN_MASK				(1 << 11)
+#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT			10
+#define OMAP4_USB2PHY_RESETDONEMCLK_MASK			(1 << 10)
+#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT			9
+#define OMAP4_USB2PHY_UTMIRESETDONE_MASK			(1 << 9)
+#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT			8
+#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK			(1 << 8)
+#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT			7
+#define OMAP4_USB2PHY_DATAPOLARITYN_MASK			(1 << 7)
+#define OMAP4_USBDPLL_FREQLOCK_SHIFT				6
+#define OMAP4_USBDPLL_FREQLOCK_MASK				(1 << 6)
+#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT			5
+#define OMAP4_USB2PHY_RESETDONETCLK_MASK			(1 << 5)
+
+/* CONTROL_I2C_1 */
+#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT				31
+#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK				(1 << 31)
+#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT			29
+#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK			(0x3 << 29)
+#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT			28
+#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK			(1 << 28)
+#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT				27
+#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK				(1 << 27)
+#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT			25
+#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK			(0x3 << 25)
+#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT			24
+#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK			(1 << 24)
+#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT				23
+#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK				(1 << 23)
+#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT				22
+#define OMAP4_HDMI_DDC_SDA_NMODE_MASK				(1 << 22)
+#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT				21
+#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK				(1 << 21)
+#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT				20
+#define OMAP4_HDMI_DDC_SCL_NMODE_MASK				(1 << 20)
+
+/* CONTROL_MMC1 */
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT			31
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK			(1 << 31)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT			30
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK			(1 << 30)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT			29
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK			(1 << 29)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT			28
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK			(1 << 28)
+#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT			27
+#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK				(1 << 27)
+#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT			26
+#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK				(1 << 26)
+#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT			25
+#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK				(1 << 25)
+#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT				24
+#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK				(1 << 24)
+#define OMAP4_USB_FD_CDEN_SHIFT					23
+#define OMAP4_USB_FD_CDEN_MASK					(1 << 23)
+#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT			22
+#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK				(1 << 22)
+#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT			21
+#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK				(1 << 21)
+
+/* CONTROL_HSI */
+#define OMAP4_HSI1_CALLOOP_SEL_SHIFT				31
+#define OMAP4_HSI1_CALLOOP_SEL_MASK				(1 << 31)
+#define OMAP4_HSI1_CALMUX_SEL_SHIFT				30
+#define OMAP4_HSI1_CALMUX_SEL_MASK				(1 << 30)
+#define OMAP4_HSI2_CALLOOP_SEL_SHIFT				29
+#define OMAP4_HSI2_CALLOOP_SEL_MASK				(1 << 29)
+#define OMAP4_HSI2_CALMUX_SEL_SHIFT				28
+#define OMAP4_HSI2_CALMUX_SEL_MASK				(1 << 28)
+
+/* CONTROL_USB */
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT		31
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK		(1 << 31)
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT		30
+#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK		(1 << 30)
+
+/* CONTROL_HDQ */
+#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT				31
+#define OMAP4_HDQ_SIO_PWRDNZ_MASK				(1 << 31)
+
+/* CONTROL_LPDDR2IO1_0 */
+#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT				30
+#define OMAP4_LPDDR2IO1_GR4_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO1_GR4_I_SHIFT				27
+#define OMAP4_LPDDR2IO1_GR4_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT				25
+#define OMAP4_LPDDR2IO1_GR4_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT				22
+#define OMAP4_LPDDR2IO1_GR3_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO1_GR3_I_SHIFT				19
+#define OMAP4_LPDDR2IO1_GR3_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT				17
+#define OMAP4_LPDDR2IO1_GR3_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT				14
+#define OMAP4_LPDDR2IO1_GR2_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO1_GR2_I_SHIFT				11
+#define OMAP4_LPDDR2IO1_GR2_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT				9
+#define OMAP4_LPDDR2IO1_GR2_WD_MASK				(0x3 << 9)
+#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT				6
+#define OMAP4_LPDDR2IO1_GR1_SR_MASK				(0x3 << 6)
+#define OMAP4_LPDDR2IO1_GR1_I_SHIFT				3
+#define OMAP4_LPDDR2IO1_GR1_I_MASK				(0x7 << 3)
+#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT				1
+#define OMAP4_LPDDR2IO1_GR1_WD_MASK				(0x3 << 1)
+
+/* CONTROL_LPDDR2IO1_1 */
+#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT				30
+#define OMAP4_LPDDR2IO1_GR8_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO1_GR8_I_SHIFT				27
+#define OMAP4_LPDDR2IO1_GR8_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT				25
+#define OMAP4_LPDDR2IO1_GR8_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT				22
+#define OMAP4_LPDDR2IO1_GR7_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO1_GR7_I_SHIFT				19
+#define OMAP4_LPDDR2IO1_GR7_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT				17
+#define OMAP4_LPDDR2IO1_GR7_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT				14
+#define OMAP4_LPDDR2IO1_GR6_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO1_GR6_I_SHIFT				11
+#define OMAP4_LPDDR2IO1_GR6_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT				9
+#define OMAP4_LPDDR2IO1_GR6_WD_MASK				(0x3 << 9)
+#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT				6
+#define OMAP4_LPDDR2IO1_GR5_SR_MASK				(0x3 << 6)
+#define OMAP4_LPDDR2IO1_GR5_I_SHIFT				3
+#define OMAP4_LPDDR2IO1_GR5_I_MASK				(0x7 << 3)
+#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT				1
+#define OMAP4_LPDDR2IO1_GR5_WD_MASK				(0x3 << 1)
+
+/* CONTROL_LPDDR2IO1_2 */
+#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT				30
+#define OMAP4_LPDDR2IO1_GR11_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO1_GR11_I_SHIFT				27
+#define OMAP4_LPDDR2IO1_GR11_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT				25
+#define OMAP4_LPDDR2IO1_GR11_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT				22
+#define OMAP4_LPDDR2IO1_GR10_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO1_GR10_I_SHIFT				19
+#define OMAP4_LPDDR2IO1_GR10_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT				17
+#define OMAP4_LPDDR2IO1_GR10_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT				14
+#define OMAP4_LPDDR2IO1_GR9_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO1_GR9_I_SHIFT				11
+#define OMAP4_LPDDR2IO1_GR9_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT				9
+#define OMAP4_LPDDR2IO1_GR9_WD_MASK				(0x3 << 9)
+
+/* CONTROL_LPDDR2IO1_3 */
+#define OMAP4_LPDDR21_VREF_CA_CCAP0_SHIFT			31
+#define OMAP4_LPDDR21_VREF_CA_CCAP0_MASK			(1 << 31)
+#define OMAP4_LPDDR21_VREF_CA_CCAP1_SHIFT			30
+#define OMAP4_LPDDR21_VREF_CA_CCAP1_MASK			(1 << 30)
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_SHIFT			29
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_MASK			(1 << 29)
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_SHIFT			28
+#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_MASK			(1 << 28)
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_SHIFT			27
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_MASK			(1 << 27)
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_SHIFT			26
+#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_MASK			(1 << 26)
+#define OMAP4_LPDDR21_VREF_CA_TAP0_SHIFT			25
+#define OMAP4_LPDDR21_VREF_CA_TAP0_MASK				(1 << 25)
+#define OMAP4_LPDDR21_VREF_CA_TAP1_SHIFT			24
+#define OMAP4_LPDDR21_VREF_CA_TAP1_MASK				(1 << 24)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_SHIFT			23
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_MASK			(1 << 23)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_SHIFT			22
+#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_MASK			(1 << 22)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_SHIFT			21
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_MASK			(1 << 21)
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_SHIFT			20
+#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_MASK			(1 << 20)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_SHIFT			19
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_MASK			(1 << 19)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_SHIFT			18
+#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_MASK			(1 << 18)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_SHIFT			17
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_MASK			(1 << 17)
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_SHIFT			16
+#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_MASK			(1 << 16)
+#define OMAP4_LPDDR21_VREF_DQ_CCAP0_SHIFT			15
+#define OMAP4_LPDDR21_VREF_DQ_CCAP0_MASK			(1 << 15)
+#define OMAP4_LPDDR21_VREF_DQ_CCAP1_SHIFT			14
+#define OMAP4_LPDDR21_VREF_DQ_CCAP1_MASK			(1 << 14)
+#define OMAP4_LPDDR21_VREF_DQ_TAP0_SHIFT			13
+#define OMAP4_LPDDR21_VREF_DQ_TAP0_MASK				(1 << 13)
+#define OMAP4_LPDDR21_VREF_DQ_TAP1_SHIFT			12
+#define OMAP4_LPDDR21_VREF_DQ_TAP1_MASK				(1 << 12)
+
+/* CONTROL_LPDDR2IO2_0 */
+#define OMAP4_LPDDR2IO2_GR4_SR_SHIFT				30
+#define OMAP4_LPDDR2IO2_GR4_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO2_GR4_I_SHIFT				27
+#define OMAP4_LPDDR2IO2_GR4_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO2_GR4_WD_SHIFT				25
+#define OMAP4_LPDDR2IO2_GR4_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO2_GR3_SR_SHIFT				22
+#define OMAP4_LPDDR2IO2_GR3_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO2_GR3_I_SHIFT				19
+#define OMAP4_LPDDR2IO2_GR3_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO2_GR3_WD_SHIFT				17
+#define OMAP4_LPDDR2IO2_GR3_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO2_GR2_SR_SHIFT				14
+#define OMAP4_LPDDR2IO2_GR2_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO2_GR2_I_SHIFT				11
+#define OMAP4_LPDDR2IO2_GR2_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO2_GR2_WD_SHIFT				9
+#define OMAP4_LPDDR2IO2_GR2_WD_MASK				(0x3 << 9)
+#define OMAP4_LPDDR2IO2_GR1_SR_SHIFT				6
+#define OMAP4_LPDDR2IO2_GR1_SR_MASK				(0x3 << 6)
+#define OMAP4_LPDDR2IO2_GR1_I_SHIFT				3
+#define OMAP4_LPDDR2IO2_GR1_I_MASK				(0x7 << 3)
+#define OMAP4_LPDDR2IO2_GR1_WD_SHIFT				1
+#define OMAP4_LPDDR2IO2_GR1_WD_MASK				(0x3 << 1)
+
+/* CONTROL_LPDDR2IO2_1 */
+#define OMAP4_LPDDR2IO2_GR8_SR_SHIFT				30
+#define OMAP4_LPDDR2IO2_GR8_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO2_GR8_I_SHIFT				27
+#define OMAP4_LPDDR2IO2_GR8_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO2_GR8_WD_SHIFT				25
+#define OMAP4_LPDDR2IO2_GR8_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO2_GR7_SR_SHIFT				22
+#define OMAP4_LPDDR2IO2_GR7_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO2_GR7_I_SHIFT				19
+#define OMAP4_LPDDR2IO2_GR7_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO2_GR7_WD_SHIFT				17
+#define OMAP4_LPDDR2IO2_GR7_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO2_GR6_SR_SHIFT				14
+#define OMAP4_LPDDR2IO2_GR6_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO2_GR6_I_SHIFT				11
+#define OMAP4_LPDDR2IO2_GR6_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO2_GR6_WD_SHIFT				9
+#define OMAP4_LPDDR2IO2_GR6_WD_MASK				(0x3 << 9)
+#define OMAP4_LPDDR2IO2_GR5_SR_SHIFT				6
+#define OMAP4_LPDDR2IO2_GR5_SR_MASK				(0x3 << 6)
+#define OMAP4_LPDDR2IO2_GR5_I_SHIFT				3
+#define OMAP4_LPDDR2IO2_GR5_I_MASK				(0x7 << 3)
+#define OMAP4_LPDDR2IO2_GR5_WD_SHIFT				1
+#define OMAP4_LPDDR2IO2_GR5_WD_MASK				(0x3 << 1)
+
+/* CONTROL_LPDDR2IO2_2 */
+#define OMAP4_LPDDR2IO2_GR11_SR_SHIFT				30
+#define OMAP4_LPDDR2IO2_GR11_SR_MASK				(0x3 << 30)
+#define OMAP4_LPDDR2IO2_GR11_I_SHIFT				27
+#define OMAP4_LPDDR2IO2_GR11_I_MASK				(0x7 << 27)
+#define OMAP4_LPDDR2IO2_GR11_WD_SHIFT				25
+#define OMAP4_LPDDR2IO2_GR11_WD_MASK				(0x3 << 25)
+#define OMAP4_LPDDR2IO2_GR10_SR_SHIFT				22
+#define OMAP4_LPDDR2IO2_GR10_SR_MASK				(0x3 << 22)
+#define OMAP4_LPDDR2IO2_GR10_I_SHIFT				19
+#define OMAP4_LPDDR2IO2_GR10_I_MASK				(0x7 << 19)
+#define OMAP4_LPDDR2IO2_GR10_WD_SHIFT				17
+#define OMAP4_LPDDR2IO2_GR10_WD_MASK				(0x3 << 17)
+#define OMAP4_LPDDR2IO2_GR9_SR_SHIFT				14
+#define OMAP4_LPDDR2IO2_GR9_SR_MASK				(0x3 << 14)
+#define OMAP4_LPDDR2IO2_GR9_I_SHIFT				11
+#define OMAP4_LPDDR2IO2_GR9_I_MASK				(0x7 << 11)
+#define OMAP4_LPDDR2IO2_GR9_WD_SHIFT				9
+#define OMAP4_LPDDR2IO2_GR9_WD_MASK				(0x3 << 9)
+
+/* CONTROL_LPDDR2IO2_3 */
+#define OMAP4_LPDDR22_VREF_CA_CCAP0_SHIFT			31
+#define OMAP4_LPDDR22_VREF_CA_CCAP0_MASK			(1 << 31)
+#define OMAP4_LPDDR22_VREF_CA_CCAP1_SHIFT			30
+#define OMAP4_LPDDR22_VREF_CA_CCAP1_MASK			(1 << 30)
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_SHIFT			29
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_MASK			(1 << 29)
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_SHIFT			28
+#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_MASK			(1 << 28)
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_SHIFT			27
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_MASK			(1 << 27)
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_SHIFT			26
+#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_MASK			(1 << 26)
+#define OMAP4_LPDDR22_VREF_CA_TAP0_SHIFT			25
+#define OMAP4_LPDDR22_VREF_CA_TAP0_MASK				(1 << 25)
+#define OMAP4_LPDDR22_VREF_CA_TAP1_SHIFT			24
+#define OMAP4_LPDDR22_VREF_CA_TAP1_MASK				(1 << 24)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_SHIFT			23
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_MASK			(1 << 23)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_SHIFT			22
+#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_MASK			(1 << 22)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_SHIFT			21
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_MASK			(1 << 21)
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_SHIFT			20
+#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_MASK			(1 << 20)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_SHIFT			19
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_MASK			(1 << 19)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_SHIFT			18
+#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_MASK			(1 << 18)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_SHIFT			17
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_MASK			(1 << 17)
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_SHIFT			16
+#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_MASK			(1 << 16)
+#define OMAP4_LPDDR22_VREF_DQ_CCAP0_SHIFT			15
+#define OMAP4_LPDDR22_VREF_DQ_CCAP0_MASK			(1 << 15)
+#define OMAP4_LPDDR22_VREF_DQ_CCAP1_SHIFT			14
+#define OMAP4_LPDDR22_VREF_DQ_CCAP1_MASK			(1 << 14)
+#define OMAP4_LPDDR22_VREF_DQ_TAP0_SHIFT			13
+#define OMAP4_LPDDR22_VREF_DQ_TAP0_MASK				(1 << 13)
+#define OMAP4_LPDDR22_VREF_DQ_TAP1_SHIFT			12
+#define OMAP4_LPDDR22_VREF_DQ_TAP1_MASK				(1 << 12)
+
+/* CONTROL_BUS_HOLD */
+#define OMAP4_ABE_DMIC_DIN3_EN_SHIFT				31
+#define OMAP4_ABE_DMIC_DIN3_EN_MASK				(1 << 31)
+#define OMAP4_MCSPI1_CS3_EN_SHIFT				30
+#define OMAP4_MCSPI1_CS3_EN_MASK				(1 << 30)
+
+/* CONTROL_C2C */
+#define OMAP4_MIRROR_MODE_EN_SHIFT				31
+#define OMAP4_MIRROR_MODE_EN_MASK				(1 << 31)
+#define OMAP4_C2C_SPARE_SHIFT					24
+#define OMAP4_C2C_SPARE_MASK					(0x7f << 24)
+
+/* CORE_CONTROL_SPARE_RW */
+#define OMAP4_CORE_CONTROL_SPARE_RW_SHIFT			0
+#define OMAP4_CORE_CONTROL_SPARE_RW_MASK			(0xffffffff << 0)
+
+/* CORE_CONTROL_SPARE_R */
+#define OMAP4_CORE_CONTROL_SPARE_R_SHIFT			0
+#define OMAP4_CORE_CONTROL_SPARE_R_MASK				(0xffffffff << 0)
+
+/* CORE_CONTROL_SPARE_R_C0 */
+#define OMAP4_CORE_CONTROL_SPARE_R_C0_SHIFT			31
+#define OMAP4_CORE_CONTROL_SPARE_R_C0_MASK			(1 << 31)
+#define OMAP4_CORE_CONTROL_SPARE_R_C1_SHIFT			30
+#define OMAP4_CORE_CONTROL_SPARE_R_C1_MASK			(1 << 30)
+#define OMAP4_CORE_CONTROL_SPARE_R_C2_SHIFT			29
+#define OMAP4_CORE_CONTROL_SPARE_R_C2_MASK			(1 << 29)
+#define OMAP4_CORE_CONTROL_SPARE_R_C3_SHIFT			28
+#define OMAP4_CORE_CONTROL_SPARE_R_C3_MASK			(1 << 28)
+#define OMAP4_CORE_CONTROL_SPARE_R_C4_SHIFT			27
+#define OMAP4_CORE_CONTROL_SPARE_R_C4_MASK			(1 << 27)
+#define OMAP4_CORE_CONTROL_SPARE_R_C5_SHIFT			26
+#define OMAP4_CORE_CONTROL_SPARE_R_C5_MASK			(1 << 26)
+#define OMAP4_CORE_CONTROL_SPARE_R_C6_SHIFT			25
+#define OMAP4_CORE_CONTROL_SPARE_R_C6_MASK			(1 << 25)
+#define OMAP4_CORE_CONTROL_SPARE_R_C7_SHIFT			24
+#define OMAP4_CORE_CONTROL_SPARE_R_C7_MASK			(1 << 24)
+
+/* CONTROL_EFUSE_1 */
+#define OMAP4_AVDAC_TRIM_BYTE3_SHIFT				24
+#define OMAP4_AVDAC_TRIM_BYTE3_MASK				(0x7f << 24)
+#define OMAP4_AVDAC_TRIM_BYTE2_SHIFT				16
+#define OMAP4_AVDAC_TRIM_BYTE2_MASK				(0xff << 16)
+#define OMAP4_AVDAC_TRIM_BYTE1_SHIFT				8
+#define OMAP4_AVDAC_TRIM_BYTE1_MASK				(0xff << 8)
+#define OMAP4_AVDAC_TRIM_BYTE0_SHIFT				0
+#define OMAP4_AVDAC_TRIM_BYTE0_MASK				(0xff << 0)
+
+/* CONTROL_EFUSE_2 */
+#define OMAP4_EFUSE_SMART2TEST_P0_SHIFT				31
+#define OMAP4_EFUSE_SMART2TEST_P0_MASK				(1 << 31)
+#define OMAP4_EFUSE_SMART2TEST_P1_SHIFT				30
+#define OMAP4_EFUSE_SMART2TEST_P1_MASK				(1 << 30)
+#define OMAP4_EFUSE_SMART2TEST_P2_SHIFT				29
+#define OMAP4_EFUSE_SMART2TEST_P2_MASK				(1 << 29)
+#define OMAP4_EFUSE_SMART2TEST_P3_SHIFT				28
+#define OMAP4_EFUSE_SMART2TEST_P3_MASK				(1 << 28)
+#define OMAP4_EFUSE_SMART2TEST_N0_SHIFT				27
+#define OMAP4_EFUSE_SMART2TEST_N0_MASK				(1 << 27)
+#define OMAP4_EFUSE_SMART2TEST_N1_SHIFT				26
+#define OMAP4_EFUSE_SMART2TEST_N1_MASK				(1 << 26)
+#define OMAP4_EFUSE_SMART2TEST_N2_SHIFT				25
+#define OMAP4_EFUSE_SMART2TEST_N2_MASK				(1 << 25)
+#define OMAP4_EFUSE_SMART2TEST_N3_SHIFT				24
+#define OMAP4_EFUSE_SMART2TEST_N3_MASK				(1 << 24)
+#define OMAP4_LPDDR2_PTV_N1_SHIFT				23
+#define OMAP4_LPDDR2_PTV_N1_MASK				(1 << 23)
+#define OMAP4_LPDDR2_PTV_N2_SHIFT				22
+#define OMAP4_LPDDR2_PTV_N2_MASK				(1 << 22)
+#define OMAP4_LPDDR2_PTV_N3_SHIFT				21
+#define OMAP4_LPDDR2_PTV_N3_MASK				(1 << 21)
+#define OMAP4_LPDDR2_PTV_N4_SHIFT				20
+#define OMAP4_LPDDR2_PTV_N4_MASK				(1 << 20)
+#define OMAP4_LPDDR2_PTV_N5_SHIFT				19
+#define OMAP4_LPDDR2_PTV_N5_MASK				(1 << 19)
+#define OMAP4_LPDDR2_PTV_P1_SHIFT				18
+#define OMAP4_LPDDR2_PTV_P1_MASK				(1 << 18)
+#define OMAP4_LPDDR2_PTV_P2_SHIFT				17
+#define OMAP4_LPDDR2_PTV_P2_MASK				(1 << 17)
+#define OMAP4_LPDDR2_PTV_P3_SHIFT				16
+#define OMAP4_LPDDR2_PTV_P3_MASK				(1 << 16)
+#define OMAP4_LPDDR2_PTV_P4_SHIFT				15
+#define OMAP4_LPDDR2_PTV_P4_MASK				(1 << 15)
+#define OMAP4_LPDDR2_PTV_P5_SHIFT				14
+#define OMAP4_LPDDR2_PTV_P5_MASK				(1 << 14)
+
+/* CONTROL_EFUSE_3 */
+#define OMAP4_STD_FUSE_SPARE_1_SHIFT				24
+#define OMAP4_STD_FUSE_SPARE_1_MASK				(0xff << 24)
+#define OMAP4_STD_FUSE_SPARE_2_SHIFT				16
+#define OMAP4_STD_FUSE_SPARE_2_MASK				(0xff << 16)
+#define OMAP4_STD_FUSE_SPARE_3_SHIFT				8
+#define OMAP4_STD_FUSE_SPARE_3_MASK				(0xff << 8)
+#define OMAP4_STD_FUSE_SPARE_4_SHIFT				0
+#define OMAP4_STD_FUSE_SPARE_4_MASK				(0xff << 0)
+
+/* CONTROL_EFUSE_4 */
+#define OMAP4_STD_FUSE_SPARE_5_SHIFT				24
+#define OMAP4_STD_FUSE_SPARE_5_MASK				(0xff << 24)
+#define OMAP4_STD_FUSE_SPARE_6_SHIFT				16
+#define OMAP4_STD_FUSE_SPARE_6_MASK				(0xff << 16)
+#define OMAP4_STD_FUSE_SPARE_7_SHIFT				8
+#define OMAP4_STD_FUSE_SPARE_7_MASK				(0xff << 8)
+#define OMAP4_STD_FUSE_SPARE_8_SHIFT				0
+#define OMAP4_STD_FUSE_SPARE_8_MASK				(0xff << 0)
+
+#endif
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
new file mode 100644
index 000000000000..17c9b37042c0
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
@@ -0,0 +1,236 @@
+/*
+ * OMAP44xx CTRL_MODULE_PAD_WKUP registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_PAD_WKUP					0x4a31e000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_REVISION				0x0000
+#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_HWINFO				0x0004
+#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_SYSCONFIG				0x0010
+#define OMAP4_CTRL_MODULE_PAD_WKUP_PADCONF_WAKEUPEVENT_0		0x007c
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_0	0x05a0
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_1	0x05a4
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_PADCONF_MODE			0x05a8
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_XTAL_OSCILLATOR		0x05ac
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_USIMIO			0x0600
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2			0x0604
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_JTAG				0x0608
+#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SYS				0x060c
+#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_RW		0x0614
+#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R			0x0618
+#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R_C0		0x061c
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT				30
+#define OMAP4_IP_REV_SCHEME_MASK				(0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT					16
+#define OMAP4_IP_REV_FUNC_MASK					(0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT					11
+#define OMAP4_IP_REV_RTL_MASK					(0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT				8
+#define OMAP4_IP_REV_MAJOR_MASK					(0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT				6
+#define OMAP4_IP_REV_CUSTOM_MASK				(0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT				0
+#define OMAP4_IP_REV_MINOR_MASK					(0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT					0
+#define OMAP4_IP_HWINFO_MASK					(0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT			2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK			(0x3 << 2)
+
+/* PADCONF_WAKEUPEVENT_0 */
+#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_SHIFT		24
+#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_MASK		(1 << 24)
+#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_SHIFT		23
+#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_MASK		(1 << 23)
+#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_SHIFT		22
+#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_MASK		(1 << 22)
+#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_SHIFT		21
+#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_MASK		(1 << 21)
+#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_SHIFT		20
+#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_MASK		(1 << 20)
+#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_SHIFT		19
+#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_MASK		(1 << 19)
+#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_SHIFT		18
+#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_MASK		(1 << 18)
+#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_SHIFT		17
+#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_MASK		(1 << 17)
+#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_SHIFT	16
+#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_MASK	(1 << 16)
+#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_SHIFT		15
+#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 15)
+#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_SHIFT		14
+#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_MASK		(1 << 14)
+#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_SHIFT		13
+#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_MASK			(1 << 13)
+#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_SHIFT		12
+#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 12)
+#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_SHIFT		11
+#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 11)
+#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_SHIFT		10
+#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 10)
+#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_SHIFT		9
+#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 9)
+#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_SHIFT		8
+#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_MASK		(1 << 8)
+#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_SHIFT		7
+#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_MASK		(1 << 7)
+#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_SHIFT			6
+#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_MASK			(1 << 6)
+#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_SHIFT			5
+#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_MASK			(1 << 5)
+#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_SHIFT		4
+#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_MASK		(1 << 4)
+#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_SHIFT			3
+#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_MASK			(1 << 3)
+#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_SHIFT		2
+#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_MASK		(1 << 2)
+#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_SHIFT		1
+#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_MASK			(1 << 1)
+#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_SHIFT			0
+#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_MASK			(1 << 0)
+
+/* CONTROL_SMART1NOPMIO_PADCONF_0 */
+#define OMAP4_FREF_DR0_SC_SHIFT					30
+#define OMAP4_FREF_DR0_SC_MASK					(0x3 << 30)
+#define OMAP4_FREF_DR1_SC_SHIFT					28
+#define OMAP4_FREF_DR1_SC_MASK					(0x3 << 28)
+#define OMAP4_FREF_DR4_SC_SHIFT					26
+#define OMAP4_FREF_DR4_SC_MASK					(0x3 << 26)
+#define OMAP4_FREF_DR5_SC_SHIFT					24
+#define OMAP4_FREF_DR5_SC_MASK					(0x3 << 24)
+#define OMAP4_FREF_DR6_SC_SHIFT					22
+#define OMAP4_FREF_DR6_SC_MASK					(0x3 << 22)
+#define OMAP4_FREF_DR7_SC_SHIFT					20
+#define OMAP4_FREF_DR7_SC_MASK					(0x3 << 20)
+#define OMAP4_GPIO_DR7_SC_SHIFT					18
+#define OMAP4_GPIO_DR7_SC_MASK					(0x3 << 18)
+#define OMAP4_DPM_DR0_SC_SHIFT					14
+#define OMAP4_DPM_DR0_SC_MASK					(0x3 << 14)
+#define OMAP4_SIM_DR0_SC_SHIFT					12
+#define OMAP4_SIM_DR0_SC_MASK					(0x3 << 12)
+
+/* CONTROL_SMART1NOPMIO_PADCONF_1 */
+#define OMAP4_FREF_DR0_LB_SHIFT					30
+#define OMAP4_FREF_DR0_LB_MASK					(0x3 << 30)
+#define OMAP4_FREF_DR1_LB_SHIFT					28
+#define OMAP4_FREF_DR1_LB_MASK					(0x3 << 28)
+#define OMAP4_FREF_DR4_LB_SHIFT					26
+#define OMAP4_FREF_DR4_LB_MASK					(0x3 << 26)
+#define OMAP4_FREF_DR5_LB_SHIFT					24
+#define OMAP4_FREF_DR5_LB_MASK					(0x3 << 24)
+#define OMAP4_FREF_DR6_LB_SHIFT					22
+#define OMAP4_FREF_DR6_LB_MASK					(0x3 << 22)
+#define OMAP4_FREF_DR7_LB_SHIFT					20
+#define OMAP4_FREF_DR7_LB_MASK					(0x3 << 20)
+#define OMAP4_GPIO_DR7_LB_SHIFT					18
+#define OMAP4_GPIO_DR7_LB_MASK					(0x3 << 18)
+#define OMAP4_DPM_DR0_LB_SHIFT					14
+#define OMAP4_DPM_DR0_LB_MASK					(0x3 << 14)
+#define OMAP4_SIM_DR0_LB_SHIFT					12
+#define OMAP4_SIM_DR0_LB_MASK					(0x3 << 12)
+
+/* CONTROL_PADCONF_MODE */
+#define OMAP4_VDDS_DV_FREF_SHIFT				31
+#define OMAP4_VDDS_DV_FREF_MASK					(1 << 31)
+#define OMAP4_VDDS_DV_BANK2_SHIFT				30
+#define OMAP4_VDDS_DV_BANK2_MASK				(1 << 30)
+
+/* CONTROL_XTAL_OSCILLATOR */
+#define OMAP4_OSCILLATOR_BOOST_SHIFT				31
+#define OMAP4_OSCILLATOR_BOOST_MASK				(1 << 31)
+#define OMAP4_OSCILLATOR_OS_OUT_SHIFT				30
+#define OMAP4_OSCILLATOR_OS_OUT_MASK				(1 << 30)
+
+/* CONTROL_USIMIO */
+#define OMAP4_PAD_USIM_CLK_LOW_SHIFT				31
+#define OMAP4_PAD_USIM_CLK_LOW_MASK				(1 << 31)
+#define OMAP4_PAD_USIM_RST_LOW_SHIFT				29
+#define OMAP4_PAD_USIM_RST_LOW_MASK				(1 << 29)
+#define OMAP4_USIM_PWRDNZ_SHIFT					28
+#define OMAP4_USIM_PWRDNZ_MASK					(1 << 28)
+
+/* CONTROL_I2C_2 */
+#define OMAP4_SR_SDA_GLFENB_SHIFT				31
+#define OMAP4_SR_SDA_GLFENB_MASK				(1 << 31)
+#define OMAP4_SR_SDA_LOAD_BITS_SHIFT				29
+#define OMAP4_SR_SDA_LOAD_BITS_MASK				(0x3 << 29)
+#define OMAP4_SR_SDA_PULLUPRESX_SHIFT				28
+#define OMAP4_SR_SDA_PULLUPRESX_MASK				(1 << 28)
+#define OMAP4_SR_SCL_GLFENB_SHIFT				27
+#define OMAP4_SR_SCL_GLFENB_MASK				(1 << 27)
+#define OMAP4_SR_SCL_LOAD_BITS_SHIFT				25
+#define OMAP4_SR_SCL_LOAD_BITS_MASK				(0x3 << 25)
+#define OMAP4_SR_SCL_PULLUPRESX_SHIFT				24
+#define OMAP4_SR_SCL_PULLUPRESX_MASK				(1 << 24)
+
+/* CONTROL_JTAG */
+#define OMAP4_JTAG_NTRST_EN_SHIFT				31
+#define OMAP4_JTAG_NTRST_EN_MASK				(1 << 31)
+#define OMAP4_JTAG_TCK_EN_SHIFT					30
+#define OMAP4_JTAG_TCK_EN_MASK					(1 << 30)
+#define OMAP4_JTAG_RTCK_EN_SHIFT				29
+#define OMAP4_JTAG_RTCK_EN_MASK					(1 << 29)
+#define OMAP4_JTAG_TDI_EN_SHIFT					28
+#define OMAP4_JTAG_TDI_EN_MASK					(1 << 28)
+#define OMAP4_JTAG_TDO_EN_SHIFT					27
+#define OMAP4_JTAG_TDO_EN_MASK					(1 << 27)
+
+/* CONTROL_SYS */
+#define OMAP4_SYS_NRESWARM_PIPU_SHIFT				31
+#define OMAP4_SYS_NRESWARM_PIPU_MASK				(1 << 31)
+
+/* WKUP_CONTROL_SPARE_RW */
+#define OMAP4_WKUP_CONTROL_SPARE_RW_SHIFT			0
+#define OMAP4_WKUP_CONTROL_SPARE_RW_MASK			(0xffffffff << 0)
+
+/* WKUP_CONTROL_SPARE_R */
+#define OMAP4_WKUP_CONTROL_SPARE_R_SHIFT			0
+#define OMAP4_WKUP_CONTROL_SPARE_R_MASK				(0xffffffff << 0)
+
+/* WKUP_CONTROL_SPARE_R_C0 */
+#define OMAP4_WKUP_CONTROL_SPARE_R_C0_SHIFT			31
+#define OMAP4_WKUP_CONTROL_SPARE_R_C0_MASK			(1 << 31)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C1_SHIFT			30
+#define OMAP4_WKUP_CONTROL_SPARE_R_C1_MASK			(1 << 30)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C2_SHIFT			29
+#define OMAP4_WKUP_CONTROL_SPARE_R_C2_MASK			(1 << 29)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C3_SHIFT			28
+#define OMAP4_WKUP_CONTROL_SPARE_R_C3_MASK			(1 << 28)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C4_SHIFT			27
+#define OMAP4_WKUP_CONTROL_SPARE_R_C4_MASK			(1 << 27)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C5_SHIFT			26
+#define OMAP4_WKUP_CONTROL_SPARE_R_C5_MASK			(1 << 26)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C6_SHIFT			25
+#define OMAP4_WKUP_CONTROL_SPARE_R_C6_MASK			(1 << 25)
+#define OMAP4_WKUP_CONTROL_SPARE_R_C7_SHIFT			24
+#define OMAP4_WKUP_CONTROL_SPARE_R_C7_MASK			(1 << 24)
+
+#endif
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
new file mode 100644
index 000000000000..a0af9baec3f7
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
@@ -0,0 +1,92 @@
+/*
+ * OMAP44xx CTRL_MODULE_WKUP registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
+
+
+/* Base address */
+#define OMAP4_CTRL_MODULE_WKUP				0x4a30c000
+
+/* Registers offset */
+#define OMAP4_CTRL_MODULE_WKUP_IP_REVISION		0x0000
+#define OMAP4_CTRL_MODULE_WKUP_IP_HWINFO		0x0004
+#define OMAP4_CTRL_MODULE_WKUP_IP_SYSCONFIG		0x0010
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_0	0x0460
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_1	0x0464
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_2	0x0468
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_3	0x046c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_4	0x0470
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_5	0x0474
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_6	0x0478
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_7	0x047c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_8	0x0480
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_9	0x0484
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_10	0x0488
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_11	0x048c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_12	0x0490
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_13	0x0494
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_14	0x0498
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_15	0x049c
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_16	0x04a0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_17	0x04a4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_18	0x04a8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_19	0x04ac
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_20	0x04b0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_21	0x04b4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_22	0x04b8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_23	0x04bc
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_24	0x04c0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_25	0x04c4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_26	0x04c8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_27	0x04cc
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_28	0x04d0
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_29	0x04d4
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_30	0x04d8
+#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_31	0x04dc
+
+/* Registers shifts and masks */
+
+/* IP_REVISION */
+#define OMAP4_IP_REV_SCHEME_SHIFT		30
+#define OMAP4_IP_REV_SCHEME_MASK		(0x3 << 30)
+#define OMAP4_IP_REV_FUNC_SHIFT			16
+#define OMAP4_IP_REV_FUNC_MASK			(0xfff << 16)
+#define OMAP4_IP_REV_RTL_SHIFT			11
+#define OMAP4_IP_REV_RTL_MASK			(0x1f << 11)
+#define OMAP4_IP_REV_MAJOR_SHIFT		8
+#define OMAP4_IP_REV_MAJOR_MASK			(0x7 << 8)
+#define OMAP4_IP_REV_CUSTOM_SHIFT		6
+#define OMAP4_IP_REV_CUSTOM_MASK		(0x3 << 6)
+#define OMAP4_IP_REV_MINOR_SHIFT		0
+#define OMAP4_IP_REV_MINOR_MASK			(0x3f << 0)
+
+/* IP_HWINFO */
+#define OMAP4_IP_HWINFO_SHIFT			0
+#define OMAP4_IP_HWINFO_MASK			(0xffffffff << 0)
+
+/* IP_SYSCONFIG */
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT	2
+#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK	(0x3 << 2)
+
+/* CONF_DEBUG_SEL_TST_0 */
+#define OMAP4_WKUP_MODE_SHIFT			0
+#define OMAP4_WKUP_MODE_MASK				(1 << 0)
+
+#endif
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 35b24409a0c8..6a4d4136002e 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -31,85 +31,94 @@ omap_uart_lsr:	.word	0
 		 * the desired UART phys and virt addresses temporarily into
 		 * the omap_uart_phys and omap_uart_virt above.
 		 */
-		.macro	addruart, rx, tmp
+		.macro	addruart, rp, rv
 
 		/* Use omap_uart_phys/virt if already configured */
-10:		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =omap_uart_phys	@ physical base address
-		ldrne	\rx, =omap_uart_virt	@ virtual base address
-		ldr	\rx, [\rx, #0]
-		cmp	\rx, #0			@ is port configured?
+10:		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rp, =omap_uart_phys	@ MMU enabled
+		add	\rv, \rp, #4		@ omap_uart_virt
+		ldr	\rp, [\rp, #0]
+		ldr	\rv, [\rv, #0]
+		cmp	\rp, #0			@ is port configured?
+		cmpne	\rv, #0
 		bne	99f			@ already configured
 
 		/* Check the debug UART configuration set in uncompress.h */
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =OMAP_UART_INFO
-		ldrne	\rx, =__phys_to_virt(OMAP_UART_INFO)
-		ldr	\rx, [\rx, #0]
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		ldreq	\rp, =OMAP_UART_INFO	@ MMU not enabled
+		ldrne	\rp, =__phys_to_virt(OMAP_UART_INFO)	@ MMU enabled
+		ldr	\rp, [\rp, #0]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
-		cmp	\rx, #0			@ no port configured?
+		cmp	\rp, #0			@ no port configured?
 		beq	21f			@ if none, try to use UART1
-		cmp	\rx, #OMAP2UART1	@ OMAP2/3/4UART1
+		cmp	\rp, #OMAP2UART1	@ OMAP2/3/4UART1
 		beq	21f			@ configure OMAP2/3/4UART1
-		cmp	\rx, #OMAP2UART2	@ OMAP2/3/4UART2
+		cmp	\rp, #OMAP2UART2	@ OMAP2/3/4UART2
 		beq	22f			@ configure OMAP2/3/4UART2
-		cmp	\rx, #OMAP2UART3	@ only on 24xx
+		cmp	\rp, #OMAP2UART3	@ only on 24xx
 		beq	23f			@ configure OMAP2UART3
-		cmp	\rx, #OMAP3UART3	@ only on 34xx
+		cmp	\rp, #OMAP3UART3	@ only on 34xx
 		beq	33f			@ configure OMAP3UART3
-		cmp	\rx, #OMAP4UART3	@ only on 44xx
+		cmp	\rp, #OMAP4UART3	@ only on 44xx
 		beq	43f			@ configure OMAP4UART3
-		cmp	\rx, #OMAP3UART4	@ only on 36xx
+		cmp	\rp, #OMAP3UART4	@ only on 36xx
 		beq	34f			@ configure OMAP3UART4
-		cmp	\rx, #OMAP4UART4	@ only on 44xx
+		cmp	\rp, #OMAP4UART4	@ only on 44xx
 		beq	44f			@ configure OMAP4UART4
-		cmp	\rx, #ZOOM_UART		@ only on zoom2/3
+		cmp	\rp, #ZOOM_UART		@ only on zoom2/3
 		beq	95f			@ configure ZOOM_UART
 
 		/* Configure the UART offset from the phys/virt base */
-21:		mov	\rx, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
+21:		mov	\rp, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
 		b	98f
-22:		mov	\rx, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
+22:		mov	\rp, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
 		b	98f
-23:		mov	\rx, #UART_OFFSET(OMAP2_UART3_BASE)
+23:		mov	\rp, #UART_OFFSET(OMAP2_UART3_BASE)
 		b	98f
-33:		mov	\rx, #UART_OFFSET(OMAP3_UART1_BASE)
-		add	\rx, \rx, #0x00fb0000
-		add	\rx, \rx, #0x00006000		@ OMAP3_UART3_BASE
+33:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
+		add	\rp, \rp, #0x00fb0000
+		add	\rp, \rp, #0x00006000		@ OMAP3_UART3_BASE
 		b	98f
-34:		mov	\rx, #UART_OFFSET(OMAP3_UART1_BASE)
-		add	\rx, \rx, #0x00fb0000
-		add	\rx, \rx, #0x00028000		@ OMAP3_UART4_BASE
+34:		mov	\rp, #UART_OFFSET(OMAP3_UART1_BASE)
+		add	\rp, \rp, #0x00fb0000
+		add	\rp, \rp, #0x00028000		@ OMAP3_UART4_BASE
 		b	98f
-43:		mov	\rx, #UART_OFFSET(OMAP4_UART3_BASE)
+43:		mov	\rp, #UART_OFFSET(OMAP4_UART3_BASE)
 		b	98f
-44:		mov	\rx, #UART_OFFSET(OMAP4_UART4_BASE)
+44:		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
 		b	98f
-95:		ldr	\rx, =ZOOM_UART_BASE
-		ldr	\tmp, =omap_uart_phys
-		str	\rx, [\tmp, #0]
-		ldr	\rx, =ZOOM_UART_VIRT
-		ldr	\tmp, =omap_uart_virt
-		str	\rx, [\tmp, #0]
-		mov	\rx, #(UART_LSR << ZOOM_PORT_SHIFT)
-		ldr	\tmp, =omap_uart_lsr
-		str	\rx, [\tmp, #0]
+95:		ldr	\rp, =ZOOM_UART_BASE
+		mrc	p15, 0, \rv, c1, c0
+		tst	\rv, #1			@ MMU enabled?
+		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rv, =omap_uart_phys	@ MMU enabled
+		str	\rp, [\rv, #0]
+		ldr	\rp, =ZOOM_UART_VIRT
+		add	\rv, \rv, #4		@ omap_uart_virt
+		str	\rp, [\rv, #0]
+		mov	\rp, #(UART_LSR << ZOOM_PORT_SHIFT)
+		add	\rv, \rv, #4		@ omap_uart_lsr
+		str	\rp, [\rv, #0]
 		b	10b
 
 		/* Store both phys and virt address for the uart */
-98:		add	\rx, \rx, #0x48000000	@ phys base
-		ldr	\tmp, =omap_uart_phys
-		str	\rx, [\tmp, #0]
-		sub	\rx, \rx, #0x48000000	@ phys base
-		add	\rx, \rx, #0xfa000000	@ virt base
-		ldr	\tmp, =omap_uart_virt
-		str	\rx, [\tmp, #0]
-		mov	\rx, #(UART_LSR << OMAP_PORT_SHIFT)
-		ldr	\tmp, =omap_uart_lsr
-		str	\rx, [\tmp, #0]
+98:		add	\rp, \rp, #0x48000000	@ phys base
+		mrc	p15, 0, \rv, c1, c0
+		tst	\rv, #1			@ MMU enabled?
+		ldreq	\rv, =__virt_to_phys(omap_uart_phys)	@ MMU not enabled
+		ldrne	\rv, =omap_uart_phys	@ MMU enabled
+		str	\rp, [\rv, #0]
+		sub	\rp, \rp, #0x48000000	@ phys base
+		add	\rp, \rp, #0xfa000000	@ virt base
+		add	\rv, \rv, #4		@ omap_uart_virt
+		str	\rp, [\rv, #0]
+		mov	\rp, #(UART_LSR << OMAP_PORT_SHIFT)
+		add	\rv, \rv, #4		@ omap_uart_lsr
+		str	\rp, [\rv, #0]
 
 		b	10b
 99:
@@ -120,7 +129,10 @@ omap_uart_lsr:	.word	0
 		.endm
 
 		.macro	busyuart,rd,rx
-1001:		ldr	\rd, =omap_uart_lsr
+1001:		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1			@ MMU enabled?
+		ldreq	\rd, =__virt_to_phys(omap_uart_lsr)	@ MMU not enabled
+		ldrne	\rd, =omap_uart_lsr	@ MMU enabled
 		ldr	\rd, [\rd, #0]
 		ldrb	\rd, [\rx, \rd]
 		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index 50fd74916643..06e64e1fc28a 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -177,7 +177,10 @@ omap_irq_base:	.word	0
 		cmpne   \irqnr, \tmp
 		cmpcs   \irqnr, \irqnr
 		.endm
+#endif
+#endif	/* MULTI_OMAP2 */
 
+#ifdef CONFIG_SMP
 		/* We assume that irqstat (the raw value of the IRQ acknowledge
 		 * register) is preserved from the macro above.
 		 * If there is an IPI, we immediately signal end of interrupt
@@ -205,8 +208,7 @@ omap_irq_base:	.word	0
 		streq	\irqstat, [\base, #GIC_CPU_EOI]
 		cmp	\tmp, #0
 		.endm
-#endif
-#endif	/* MULTI_OMAP2 */
+#endif	/* CONFIG_SMP */
 
 		.macro	irq_prio_table
 		.endm
diff --git a/arch/arm/mach-omap2/include/mach/id.h b/arch/arm/mach-omap2/include/mach/id.h
new file mode 100644
index 000000000000..02ed3aa56f1e
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/id.h
@@ -0,0 +1,22 @@
+/*
+ * OMAP2 CPU identification code
+ *
+ * Copyright (C) 2010 Kan-Ru Chen <kanru@0xlab.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP2_ARCH_ID_H
+#define OMAP2_ARCH_ID_H
+
+struct omap_die_id {
+	u32 id_0;
+	u32 id_1;
+	u32 id_2;
+	u32 id_3;
+};
+
+void omap_get_die_id(struct omap_die_id *odi);
+
+#endif
diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h
index 423af3a6dd31..2744dfee1ff4 100644
--- a/arch/arm/mach-omap2/include/mach/omap4-common.h
+++ b/arch/arm/mach-omap2/include/mach/omap4-common.h
@@ -13,6 +13,13 @@
 #ifndef OMAP_ARCH_OMAP4_COMMON_H
 #define OMAP_ARCH_OMAP4_COMMON_H
 
+/*
+ * wfi used in low power code. Directly opcode is used instead
+ * of instruction to avoid mulit-omap build break
+ */
+#define do_wfi()			\
+		__asm__ __volatile__ (".word	0xe320f003" : : : "memory")
+
 #ifdef CONFIG_CACHE_L2X0
 extern void __iomem *l2cache_base;
 #endif
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
index 9ce9b6e8ad23..4da31e997efe 100644
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x38000000)
+#define VMALLOC_END	  0xf8000000
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3cfb425ea67e..40562ddd3ee4 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -28,16 +28,15 @@
 
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
 #include <plat/sram.h>
 #include <plat/sdrc.h>
 #include <plat/gpmc.h>
 #include <plat/serial.h>
-#include <plat/vram.h>
 
 #include "clock2xxx.h"
 #include "clock3xxx.h"
 #include "clock44xx.h"
+#include "io.h"
 
 #include <plat/omap-pm.h>
 #include <plat/powerdomain.h>
@@ -45,6 +44,7 @@
 
 #include <plat/clockdomain.h>
 #include "clockdomains.h"
+
 #include <plat/omap_hwmod.h>
 
 /*
@@ -241,8 +241,6 @@ static void __init _omap2_map_common_io(void)
 
 	omap2_check_revision();
 	omap_sram_init();
-	omapfb_reserve_sdram();
-	omap_vram_reserve_sdram();
 }
 
 #ifdef CONFIG_ARCH_OMAP2420
@@ -316,6 +314,8 @@ static int __init _omap2_init_reprogram_sdrc(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 				 struct omap_sdrc_params *sdrc_cs1)
 {
+	u8 skip_setup_idle = 0;
+
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_autodeps);
 	if (cpu_is_omap242x())
@@ -324,7 +324,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 		omap2430_hwmod_init();
 	else if (cpu_is_omap34xx())
 		omap3xxx_hwmod_init();
-	omap2_mux_init();
+	else if (cpu_is_omap44xx())
+		omap44xx_hwmod_init();
+
 	/* The OPP tables have to be registered before a clk init */
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 
@@ -340,9 +342,11 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 		pr_err("Could not init clock framework - unknown CPU\n");
 
 	omap_serial_early_init();
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())   /* FIXME: OMAP4 */
-		omap_hwmod_late_init();
-	omap_pm_if_init();
+
+#ifndef CONFIG_PM_RUNTIME
+	skip_setup_idle = 1;
+#endif
+	omap_hwmod_late_init(skip_setup_idle);
 	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 		_omap2_init_reprogram_sdrc();
diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h
new file mode 100644
index 000000000000..fd230c6cded5
--- /dev/null
+++ b/arch/arm/mach-omap2/io.h
@@ -0,0 +1,7 @@
+
+#ifndef __MACH_OMAP2_IO_H__
+#define __MACH_OMAP2_IO_H__
+
+extern int __init omap_sram_init(void);
+
+#endif /*  __MACH_OMAP2_IO_H__ */
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index e82da680d908..14ee686b6492 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -44,9 +44,13 @@
 #define MMU_IRQ_EMUMISS		(1 << 2)
 #define MMU_IRQ_TRANSLATIONFAULT	(1 << 1)
 #define MMU_IRQ_TLBMISS		(1 << 0)
-#define MMU_IRQ_MASK	\
-	(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \
-	 MMU_IRQ_TRANSLATIONFAULT)
+
+#define __MMU_IRQ_FAULT		\
+	(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT)
+#define MMU_IRQ_MASK		\
+	(__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS)
+#define MMU_IRQ_TWL_MASK	(__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT)
+#define MMU_IRQ_TLB_MISS_MASK	(__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS)
 
 /* MMU_CNTL */
 #define MMU_CNTL_SHIFT		1
@@ -61,6 +65,26 @@
 	 ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 :	\
 	 ((pgsz) == MMU_CAM_PGSZ_4K)  ? 0xfffff000 : 0)
 
+
+static void __iommu_set_twl(struct iommu *obj, bool on)
+{
+	u32 l = iommu_read_reg(obj, MMU_CNTL);
+
+	if (on)
+		iommu_write_reg(obj, MMU_IRQ_TWL_MASK, MMU_IRQENABLE);
+	else
+		iommu_write_reg(obj, MMU_IRQ_TLB_MISS_MASK, MMU_IRQENABLE);
+
+	l &= ~MMU_CNTL_MASK;
+	if (on)
+		l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
+	else
+		l |= (MMU_CNTL_MMU_EN);
+
+	iommu_write_reg(obj, l, MMU_CNTL);
+}
+
+
 static int omap2_iommu_enable(struct iommu *obj)
 {
 	u32 l, pa;
@@ -96,13 +120,9 @@ static int omap2_iommu_enable(struct iommu *obj)
 	l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
 	iommu_write_reg(obj, l, MMU_SYSCONFIG);
 
-	iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE);
 	iommu_write_reg(obj, pa, MMU_TTB);
 
-	l = iommu_read_reg(obj, MMU_CNTL);
-	l &= ~MMU_CNTL_MASK;
-	l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
-	iommu_write_reg(obj, l, MMU_CNTL);
+	__iommu_set_twl(obj, true);
 
 	return 0;
 }
@@ -118,6 +138,11 @@ static void omap2_iommu_disable(struct iommu *obj)
 	dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
 }
 
+static void omap2_iommu_set_twl(struct iommu *obj, bool on)
+{
+	__iommu_set_twl(obj, false);
+}
+
 static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
 {
 	int i;
@@ -147,7 +172,7 @@ static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
 	printk("\n");
 
 	iommu_write_reg(obj, stat, MMU_IRQSTATUS);
-	omap2_iommu_disable(obj);
+
 	return stat;
 }
 
@@ -300,6 +325,7 @@ static const struct iommu_functions omap2_iommu_ops = {
 
 	.enable		= omap2_iommu_enable,
 	.disable	= omap2_iommu_disable,
+	.set_twl	= omap2_iommu_set_twl,
 	.fault_isr	= omap2_iommu_fault_isr,
 
 	.tlb_read_cr	= omap2_tlb_read_cr,
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 26aeef560aa3..32eeabe9d2ab 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -47,7 +47,6 @@ static struct omap_irq_bank {
 } __attribute__ ((aligned(4))) irq_banks[] = {
 	{
 		/* MPU INTC */
-		.base_reg	= 0,
 		.nr_irqs	= 96,
 	},
 };
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 318f3638653c..40ddecab93a9 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -10,7 +10,6 @@
  * for more details.
  */
 
-#include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -18,8 +17,6 @@
 #include <plat/mailbox.h>
 #include <mach/irqs.h>
 
-#define DRV_NAME "omap2-mailbox"
-
 #define MAILBOX_REVISION		0x000
 #define MAILBOX_SYSCONFIG		0x010
 #define MAILBOX_SYSSTATUS		0x014
@@ -131,7 +128,7 @@ static int omap2_mbox_startup(struct omap_mbox *mbox)
 	}
 
 	l = mbox_read_reg(MAILBOX_REVISION);
-	pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
+	pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
 
 	if (cpu_is_omap44xx())
 		l = OMAP4_SMARTIDLE;
@@ -184,7 +181,7 @@ static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
 static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
-	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
+	struct omap_mbox2_priv *p = mbox->priv;
 	u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
 
 	l = mbox_read_reg(p->irqenable);
@@ -195,7 +192,7 @@ static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
 static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
-	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
+	struct omap_mbox2_priv *p = mbox->priv;
 	u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
 	l = mbox_read_reg(p->irqdisable);
 	l &= ~bit;
@@ -205,7 +202,7 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
 static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
-	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
+	struct omap_mbox2_priv *p = mbox->priv;
 	u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
 
 	mbox_write_reg(bit, p->irqstatus);
@@ -217,7 +214,7 @@ static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
 static int omap2_mbox_is_irq(struct omap_mbox *mbox,
 		omap_mbox_type_t irq)
 {
-	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
+	struct omap_mbox2_priv *p = mbox->priv;
 	u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
 	u32 enable = mbox_read_reg(p->irqenable);
 	u32 status = mbox_read_reg(p->irqstatus);
@@ -283,6 +280,8 @@ static struct omap_mbox_ops omap2_mbox_ops = {
  */
 
 /* FIXME: the following structs should be filled automatically by the user id */
+
+#if defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_ARCH_OMAP2420)
 /* DSP */
 static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.tx_fifo = {
@@ -300,10 +299,46 @@ static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.irqdisable	= MAILBOX_IRQENABLE(0),
 };
 
+struct omap_mbox mbox_dsp_info = {
+	.name	= "dsp",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_dsp_priv,
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3430)
+struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL };
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2420)
+/* IVA */
+static struct omap_mbox2_priv omap2_mbox_iva_priv = {
+	.tx_fifo = {
+		.msg		= MAILBOX_MESSAGE(2),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(2),
+	},
+	.rx_fifo = {
+		.msg		= MAILBOX_MESSAGE(3),
+		.msg_stat	= MAILBOX_MSGSTATUS(3),
+	},
+	.irqenable	= MAILBOX_IRQENABLE(3),
+	.irqstatus	= MAILBOX_IRQSTATUS(3),
+	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
+	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
+	.irqdisable	= MAILBOX_IRQENABLE(3),
+};
+
+static struct omap_mbox mbox_iva_info = {
+	.name	= "iva",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_iva_priv,
+};
 
+struct omap_mbox *omap2_mboxes[] = { &mbox_iva_info, &mbox_dsp_info, NULL };
+#endif
 
-/* OMAP4 specific data structure. Use the cpu_is_omap4xxx()
-to use this*/
+#if defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 */
 static struct omap_mbox2_priv omap2_mbox_1_priv = {
 	.tx_fifo = {
 		.msg		= MAILBOX_MESSAGE(0),
@@ -325,14 +360,6 @@ struct omap_mbox mbox_1_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_1_priv,
 };
-EXPORT_SYMBOL(mbox_1_info);
-
-struct omap_mbox mbox_dsp_info = {
-	.name	= "dsp",
-	.ops	= &omap2_mbox_ops,
-	.priv	= &omap2_mbox_dsp_priv,
-};
-EXPORT_SYMBOL(mbox_dsp_info);
 
 static struct omap_mbox2_priv omap2_mbox_2_priv = {
 	.tx_fifo = {
@@ -355,110 +382,64 @@ struct omap_mbox mbox_2_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_2_priv,
 };
-EXPORT_SYMBOL(mbox_2_info);
-
-
-#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
-static struct omap_mbox2_priv omap2_mbox_iva_priv = {
-	.tx_fifo = {
-		.msg		= MAILBOX_MESSAGE(2),
-		.fifo_stat	= MAILBOX_FIFOSTATUS(2),
-	},
-	.rx_fifo = {
-		.msg		= MAILBOX_MESSAGE(3),
-		.msg_stat	= MAILBOX_MSGSTATUS(3),
-	},
-	.irqenable	= MAILBOX_IRQENABLE(3),
-	.irqstatus	= MAILBOX_IRQSTATUS(3),
-	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
-	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
-	.irqdisable	= MAILBOX_IRQENABLE(3),
-};
 
-static struct omap_mbox mbox_iva_info = {
-	.name	= "iva",
-	.ops	= &omap2_mbox_ops,
-	.priv	= &omap2_mbox_iva_priv,
-};
+struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
 #endif
 
 static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 {
-	struct resource *res;
+	struct resource *mem;
 	int ret;
+	struct omap_mbox **list;
 
-	/* MBOX base */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid mem resource\n");
-		return -ENODEV;
+	if (false)
+		;
+#if defined(CONFIG_ARCH_OMAP3430)
+	else if (cpu_is_omap3430()) {
+		list = omap3_mboxes;
+
+		list[0]->irq = platform_get_irq_byname(pdev, "dsp");
 	}
-	mbox_base = ioremap(res->start, resource_size(res));
-	if (!mbox_base)
-		return -ENOMEM;
+#endif
+#if defined(CONFIG_ARCH_OMAP2420)
+	else if (cpu_is_omap2420()) {
+		list = omap2_mboxes;
 
-	/* DSP or IVA2 IRQ */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+		list[0]->irq = platform_get_irq_byname(pdev, "dsp");
+		list[1]->irq = platform_get_irq_byname(pdev, "iva");
+	}
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	else if (cpu_is_omap44xx()) {
+		list = omap4_mboxes;
 
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid irq resource\n");
-		ret = -ENODEV;
-		goto err_dsp;
+		list[0]->irq = list[1]->irq =
+			platform_get_irq_byname(pdev, "mbox");
 	}
-	if (cpu_is_omap44xx()) {
-		mbox_1_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_1_info);
-	} else {
-		mbox_dsp_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+#endif
+	else {
+		pr_err("%s: platform not supported\n", __func__);
+		return -ENODEV;
 	}
-	if (ret)
-		goto err_dsp;
 
-	if (cpu_is_omap44xx()) {
-		mbox_2_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_2_info);
-		if (ret) {
-			omap_mbox_unregister(&mbox_1_info);
-			goto err_dsp;
-		}
-	}
-#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
-	if (cpu_is_omap2420()) {
-		/* IVA IRQ */
-		res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-		if (unlikely(!res)) {
-			dev_err(&pdev->dev, "invalid irq resource\n");
-			ret = -ENODEV;
-			omap_mbox_unregister(&mbox_dsp_info);
-			goto err_dsp;
-		}
-		mbox_iva_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_iva_info);
-		if (ret) {
-			omap_mbox_unregister(&mbox_dsp_info);
-			goto err_dsp;
-		}
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mbox_base = ioremap(mem->start, resource_size(mem));
+	if (!mbox_base)
+		return -ENOMEM;
+
+	ret = omap_mbox_register(&pdev->dev, list);
+	if (ret) {
+		iounmap(mbox_base);
+		return ret;
 	}
-#endif
 	return 0;
 
-err_dsp:
-	iounmap(mbox_base);
 	return ret;
 }
 
 static int __devexit omap2_mbox_remove(struct platform_device *pdev)
 {
-#if defined(CONFIG_ARCH_OMAP2420)
-	omap_mbox_unregister(&mbox_iva_info);
-#endif
-
-	if (cpu_is_omap44xx()) {
-		omap_mbox_unregister(&mbox_2_info);
-		omap_mbox_unregister(&mbox_1_info);
-	} else
-		omap_mbox_unregister(&mbox_dsp_info);
+	omap_mbox_unregister();
 	iounmap(mbox_base);
 	return 0;
 }
@@ -467,7 +448,7 @@ static struct platform_driver omap2_mbox_driver = {
 	.probe = omap2_mbox_probe,
 	.remove = __devexit_p(omap2_mbox_remove),
 	.driver = {
-		.name = DRV_NAME,
+		.name = "omap-mailbox",
 	},
 };
 
@@ -486,5 +467,6 @@ module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt");
-MODULE_ALIAS("platform:"DRV_NAME);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_AUTHOR("Paul Mundt");
+MODULE_ALIAS("platform:omap2-mailbox");
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index c29337074ad3..f9c9df5b5ff1 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -20,31 +20,89 @@
 
 #include <mach/irqs.h>
 #include <plat/dma.h>
-#include <plat/mux.h>
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>
 
-static void omap2_mcbsp2_mux_setup(void)
+#include "control.h"
+
+
+/* McBSP internal signal muxing functions */
+
+void omap2_mcbsp1_mux_clkr_src(u8 mux)
 {
-	omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
-	omap_cfg_reg(R14_24XX_MCBSP2_FSX);
-	omap_cfg_reg(W15_24XX_MCBSP2_DR);
-	omap_cfg_reg(V15_24XX_MCBSP2_DX);
-	omap_cfg_reg(V14_24XX_GPIO117);
-	/*
-	 * TODO: Need to add MUX settings for OMAP 2430 SDP
-	 */
+	u32 v;
+
+	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	if (mux == CLKR_SRC_CLKR)
+		v &= ~OMAP2_MCBSP1_CLKR_MASK;
+	else if (mux == CLKR_SRC_CLKX)
+		v |= OMAP2_MCBSP1_CLKR_MASK;
+	omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
 }
+EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
 
-static void omap2_mcbsp_request(unsigned int id)
+void omap2_mcbsp1_mux_fsr_src(u8 mux)
 {
-	if (cpu_is_omap2420() && (id == OMAP_MCBSP2))
-		omap2_mcbsp2_mux_setup();
+	u32 v;
+
+	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	if (mux == FSR_SRC_FSR)
+		v &= ~OMAP2_MCBSP1_FSR_MASK;
+	else if (mux == FSR_SRC_FSX)
+		v |= OMAP2_MCBSP1_FSR_MASK;
+	omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
 }
+EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
 
-static struct omap_mcbsp_ops omap2_mcbsp_ops = {
-	.request	= omap2_mcbsp_request,
-};
+/* McBSP CLKS source switching function */
+
+int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
+{
+	struct omap_mcbsp *mcbsp;
+	struct clk *fck_src;
+	char *fck_src_name;
+	int r;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
+		return -EINVAL;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+		fck_src_name = "pad_fck";
+	else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+		fck_src_name = "prcm_fck";
+	else
+		return -EINVAL;
+
+	fck_src = clk_get(mcbsp->dev, fck_src_name);
+	if (IS_ERR_OR_NULL(fck_src)) {
+		pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks",
+		       fck_src_name);
+		return -EINVAL;
+	}
+
+	clk_disable(mcbsp->fclk);
+
+	r = clk_set_parent(mcbsp->fclk, fck_src);
+	if (IS_ERR_VALUE(r)) {
+		pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n",
+		       "clks", fck_src_name);
+		clk_put(fck_src);
+		return -EINVAL;
+	}
+
+	clk_enable(mcbsp->fclk);
+
+	clk_put(fck_src);
+
+	return 0;
+}
+EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
+
+
+/* Platform data */
 
 #ifdef CONFIG_ARCH_OMAP2420
 static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
@@ -54,7 +112,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base	= OMAP24XX_MCBSP2_BASE,
@@ -62,7 +119,6 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
 	},
 };
 #define OMAP2420_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2420_mcbsp_pdata)
@@ -81,7 +137,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base	= OMAP24XX_MCBSP2_BASE,
@@ -89,7 +144,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP3_BASE,
@@ -97,7 +151,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP3_TX,
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP4_BASE,
@@ -105,7 +158,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP4_TX,
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base	= OMAP2430_MCBSP5_BASE,
@@ -113,7 +165,6 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP5_TX,
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
 	},
 };
 #define OMAP2430_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2430_mcbsp_pdata)
@@ -132,8 +183,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x6F,
+		.buffer_size	= 0x80, /* The FIFO has 128 locations */
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -142,8 +192,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x3FF,
+		.buffer_size	= 0x500, /* The FIFO has 1024 + 256 locations */
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP3_BASE,
@@ -152,8 +201,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP3_TX,
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x6F,
+		.buffer_size	= 0x80, /* The FIFO has 128 locations */
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -161,8 +209,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP4_TX,
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x6F,
+		.buffer_size	= 0x80, /* The FIFO has 128 locations */
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -170,8 +217,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP5_TX,
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
-		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x6F,
+		.buffer_size	= 0x80, /* The FIFO has 128 locations */
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
@@ -188,28 +234,24 @@ static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP1_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP1_TX,
 		.tx_irq         = OMAP44XX_IRQ_MCBSP1,
-		.ops            = &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base      = OMAP44XX_MCBSP2_BASE,
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP2_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP2_TX,
 		.tx_irq         = OMAP44XX_IRQ_MCBSP2,
-		.ops            = &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base      = OMAP44XX_MCBSP3_BASE,
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP3_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP3_TX,
 		.tx_irq         = OMAP44XX_IRQ_MCBSP3,
-		.ops            = &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base      = OMAP44XX_MCBSP4_BASE,
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP4_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP4_TX,
 		.tx_irq         = OMAP44XX_IRQ_MCBSP4,
-		.ops            = &omap2_mcbsp_ops,
 	},
 };
 #define OMAP44XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap44xx_mcbsp_pdata)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 8b3d26935a39..074536ae401f 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -23,12 +23,11 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  */
-#include <linux/module.h>
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
 #include <linux/list.h>
+#include <linux/slab.h>
 #include <linux/ctype.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -36,13 +35,12 @@
 
 #include <asm/system.h>
 
-#include <plat/control.h>
-#include <plat/mux.h>
-
+#include "control.h"
 #include "mux.h"
 
 #define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */
 #define OMAP_MUX_BASE_SZ		0x5ca
+#define MUXABLE_GPIO_MODE3		BIT(0)
 
 struct omap_mux_entry {
 	struct omap_mux		mux;
@@ -51,6 +49,7 @@ struct omap_mux_entry {
 
 static unsigned long mux_phys;
 static void __iomem *mux_base;
+static u8 omap_mux_flags;
 
 u16 omap_mux_read(u16 reg)
 {
@@ -76,301 +75,6 @@ void omap_mux_write_array(struct omap_board_mux *board_mux)
 	}
 }
 
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX)
-
-static struct omap_mux_cfg arch_mux_cfg;
-
-/* NOTE: See mux.h for the enumeration */
-
-static struct pin_config __initdata_or_module omap24xx_pins[] = {
-/*
- *	description			mux	mux	pull	pull	debug
- *					offset	mode	ena	type
- */
-
-/* 24xx I2C */
-MUX_CFG_24XX("M19_24XX_I2C1_SCL",	0x111,	0,	0,	0,	1)
-MUX_CFG_24XX("L15_24XX_I2C1_SDA",	0x112,	0,	0,	0,	1)
-MUX_CFG_24XX("J15_24XX_I2C2_SCL",	0x113,	0,	0,	1,	1)
-MUX_CFG_24XX("H19_24XX_I2C2_SDA",	0x114,	0,	0,	0,	1)
-
-/* Menelaus interrupt */
-MUX_CFG_24XX("W19_24XX_SYS_NIRQ",	0x12c,	0,	1,	1,	1)
-
-/* 24xx clocks */
-MUX_CFG_24XX("W14_24XX_SYS_CLKOUT",	0x137,	0,	1,	1,	1)
-
-/* 24xx GPMC chipselects, wait pin monitoring */
-MUX_CFG_24XX("E2_GPMC_NCS2",		0x08e,	0,	1,	1,	1)
-MUX_CFG_24XX("L2_GPMC_NCS7",		0x093,	0,	1,	1,	1)
-MUX_CFG_24XX("L3_GPMC_WAIT0",		0x09a,	0,	1,	1,	1)
-MUX_CFG_24XX("N7_GPMC_WAIT1",		0x09b,	0,	1,	1,	1)
-MUX_CFG_24XX("M1_GPMC_WAIT2",		0x09c,	0,	1,	1,	1)
-MUX_CFG_24XX("P1_GPMC_WAIT3",		0x09d,	0,	1,	1,	1)
-
-/* 24xx McBSP */
-MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX",	0x124,	1,	1,	0,	1)
-MUX_CFG_24XX("R14_24XX_MCBSP2_FSX",	0x125,	1,	1,	0,	1)
-MUX_CFG_24XX("W15_24XX_MCBSP2_DR",	0x126,	1,	1,	0,	1)
-MUX_CFG_24XX("V15_24XX_MCBSP2_DX",	0x127,	1,	1,	0,	1)
-
-/* 24xx GPIO */
-MUX_CFG_24XX("M21_242X_GPIO11",		0x0c9,	3,	1,	1,	1)
-MUX_CFG_24XX("P21_242X_GPIO12",		0x0ca,	3,	0,	0,	1)
-MUX_CFG_24XX("AA10_242X_GPIO13",	0x0e5,	3,	0,	0,	1)
-MUX_CFG_24XX("AA6_242X_GPIO14",		0x0e6,	3,	0,	0,	1)
-MUX_CFG_24XX("AA4_242X_GPIO15",		0x0e7,	3,	0,	0,	1)
-MUX_CFG_24XX("Y11_242X_GPIO16",		0x0e8,	3,	0,	0,	1)
-MUX_CFG_24XX("AA12_242X_GPIO17",	0x0e9,	3,	0,	0,	1)
-MUX_CFG_24XX("AA8_242X_GPIO58",		0x0ea,	3,	0,	0,	1)
-MUX_CFG_24XX("Y20_24XX_GPIO60",		0x12c,	3,	0,	0,	1)
-MUX_CFG_24XX("W4__24XX_GPIO74",		0x0f2,	3,	0,	0,	1)
-MUX_CFG_24XX("N15_24XX_GPIO85",		0x103,	3,	0,	0,	1)
-MUX_CFG_24XX("M15_24XX_GPIO92",		0x10a,	3,	0,	0,	1)
-MUX_CFG_24XX("P20_24XX_GPIO93",		0x10b,	3,	0,	0,	1)
-MUX_CFG_24XX("P18_24XX_GPIO95",		0x10d,	3,	0,	0,	1)
-MUX_CFG_24XX("M18_24XX_GPIO96",		0x10e,	3,	0,	0,	1)
-MUX_CFG_24XX("L14_24XX_GPIO97",		0x10f,	3,	0,	0,	1)
-MUX_CFG_24XX("J15_24XX_GPIO99",		0x113,	3,	1,	1,	1)
-MUX_CFG_24XX("V14_24XX_GPIO117",	0x128,	3,	1,	0,	1)
-MUX_CFG_24XX("P14_24XX_GPIO125",	0x140,	3,	1,	1,	1)
-
-/* 242x DBG GPIO */
-MUX_CFG_24XX("V4_242X_GPIO49",		0xd3,	3,	0,	0,	1)
-MUX_CFG_24XX("W2_242X_GPIO50",		0xd4,	3,	0,	0,	1)
-MUX_CFG_24XX("U4_242X_GPIO51",		0xd5,	3,	0,	0,	1)
-MUX_CFG_24XX("V3_242X_GPIO52",		0xd6,	3,	0,	0,	1)
-MUX_CFG_24XX("V2_242X_GPIO53",		0xd7,	3,	0,	0,	1)
-MUX_CFG_24XX("V6_242X_GPIO53",		0xcf,	3,	0,	0,	1)
-MUX_CFG_24XX("T4_242X_GPIO54",		0xd8,	3,	0,	0,	1)
-MUX_CFG_24XX("Y4_242X_GPIO54",		0xd0,	3,	0,	0,	1)
-MUX_CFG_24XX("T3_242X_GPIO55",		0xd9,	3,	0,	0,	1)
-MUX_CFG_24XX("U2_242X_GPIO56",		0xda,	3,	0,	0,	1)
-
-/* 24xx external DMA requests */
-MUX_CFG_24XX("AA10_242X_DMAREQ0",	0x0e5,	2,	0,	0,	1)
-MUX_CFG_24XX("AA6_242X_DMAREQ1",	0x0e6,	2,	0,	0,	1)
-MUX_CFG_24XX("E4_242X_DMAREQ2",		0x074,	2,	0,	0,	1)
-MUX_CFG_24XX("G4_242X_DMAREQ3",		0x073,	2,	0,	0,	1)
-MUX_CFG_24XX("D3_242X_DMAREQ4",		0x072,	2,	0,	0,	1)
-MUX_CFG_24XX("E3_242X_DMAREQ5",		0x071,	2,	0,	0,	1)
-
-/* UART3 */
-MUX_CFG_24XX("K15_24XX_UART3_TX",	0x118,	0,	0,	0,	1)
-MUX_CFG_24XX("K14_24XX_UART3_RX",	0x119,	0,	0,	0,	1)
-
-/* MMC/SDIO */
-MUX_CFG_24XX("G19_24XX_MMC_CLKO",	0x0f3,	0,	0,	0,	1)
-MUX_CFG_24XX("H18_24XX_MMC_CMD",	0x0f4,	0,	0,	0,	1)
-MUX_CFG_24XX("F20_24XX_MMC_DAT0",	0x0f5,	0,	0,	0,	1)
-MUX_CFG_24XX("H14_24XX_MMC_DAT1",	0x0f6,	0,	0,	0,	1)
-MUX_CFG_24XX("E19_24XX_MMC_DAT2",	0x0f7,	0,	0,	0,	1)
-MUX_CFG_24XX("D19_24XX_MMC_DAT3",	0x0f8,	0,	0,	0,	1)
-MUX_CFG_24XX("F19_24XX_MMC_DAT_DIR0",	0x0f9,	0,	0,	0,	1)
-MUX_CFG_24XX("E20_24XX_MMC_DAT_DIR1",	0x0fa,	0,	0,	0,	1)
-MUX_CFG_24XX("F18_24XX_MMC_DAT_DIR2",	0x0fb,	0,	0,	0,	1)
-MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3",	0x0fc,	0,	0,	0,	1)
-MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR",	0x0fd,	0,	0,	0,	1)
-MUX_CFG_24XX("H15_24XX_MMC_CLKI",	0x0fe,	0,	0,	0,	1)
-
-/* Full speed USB */
-MUX_CFG_24XX("J20_24XX_USB0_PUEN",	0x11d,	0,	0,	0,	1)
-MUX_CFG_24XX("J19_24XX_USB0_VP",	0x11e,	0,	0,	0,	1)
-MUX_CFG_24XX("K20_24XX_USB0_VM",	0x11f,	0,	0,	0,	1)
-MUX_CFG_24XX("J18_24XX_USB0_RCV",	0x120,	0,	0,	0,	1)
-MUX_CFG_24XX("K19_24XX_USB0_TXEN",	0x121,	0,	0,	0,	1)
-MUX_CFG_24XX("J14_24XX_USB0_SE0",	0x122,	0,	0,	0,	1)
-MUX_CFG_24XX("K18_24XX_USB0_DAT",	0x123,	0,	0,	0,	1)
-
-MUX_CFG_24XX("N14_24XX_USB1_SE0",	0x0ed,	2,	0,	0,	1)
-MUX_CFG_24XX("W12_24XX_USB1_SE0",	0x0dd,	3,	0,	0,	1)
-MUX_CFG_24XX("P15_24XX_USB1_DAT",	0x0ee,	2,	0,	0,	1)
-MUX_CFG_24XX("R13_24XX_USB1_DAT",	0x0e0,	3,	0,	0,	1)
-MUX_CFG_24XX("W20_24XX_USB1_TXEN",	0x0ec,	2,	0,	0,	1)
-MUX_CFG_24XX("P13_24XX_USB1_TXEN",	0x0df,	3,	0,	0,	1)
-MUX_CFG_24XX("V19_24XX_USB1_RCV",	0x0eb,	2,	0,	0,	1)
-MUX_CFG_24XX("V12_24XX_USB1_RCV",	0x0de,	3,	0,	0,	1)
-
-MUX_CFG_24XX("AA10_24XX_USB2_SE0",	0x0e5,	2,	0,	0,	1)
-MUX_CFG_24XX("Y11_24XX_USB2_DAT",	0x0e8,	2,	0,	0,	1)
-MUX_CFG_24XX("AA12_24XX_USB2_TXEN",	0x0e9,	2,	0,	0,	1)
-MUX_CFG_24XX("AA6_24XX_USB2_RCV",	0x0e6,	2,	0,	0,	1)
-MUX_CFG_24XX("AA4_24XX_USB2_TLLSE0",	0x0e7,	2,	0,	0,	1)
-
-/* Keypad GPIO*/
-MUX_CFG_24XX("T19_24XX_KBR0",		0x106,	3,	1,	1,	1)
-MUX_CFG_24XX("R19_24XX_KBR1",		0x107,	3,	1,	1,	1)
-MUX_CFG_24XX("V18_24XX_KBR2",		0x139,	3,	1,	1,	1)
-MUX_CFG_24XX("M21_24XX_KBR3",		0xc9,	3,	1,	1,	1)
-MUX_CFG_24XX("E5__24XX_KBR4",		0x138,	3,	1,	1,	1)
-MUX_CFG_24XX("M18_24XX_KBR5",		0x10e,	3,	1,	1,	1)
-MUX_CFG_24XX("R20_24XX_KBC0",		0x108,	3,	0,	0,	1)
-MUX_CFG_24XX("M14_24XX_KBC1",		0x109,	3,	0,	0,	1)
-MUX_CFG_24XX("H19_24XX_KBC2",		0x114,	3,	0,	0,	1)
-MUX_CFG_24XX("V17_24XX_KBC3",		0x135,	3,	0,	0,	1)
-MUX_CFG_24XX("P21_24XX_KBC4",		0xca,	3,	0,	0,	1)
-MUX_CFG_24XX("L14_24XX_KBC5",		0x10f,	3,	0,	0,	1)
-MUX_CFG_24XX("N19_24XX_KBC6",		0x110,	3,	0,	0,	1)
-
-/* 24xx Menelaus Keypad GPIO */
-MUX_CFG_24XX("B3__24XX_KBR5",		0x30,	3,	1,	1,	1)
-MUX_CFG_24XX("AA4_24XX_KBC2",		0xe7,	3,	0,	0,	1)
-MUX_CFG_24XX("B13_24XX_KBC6",		0x110,	3,	0,	0,	1)
-
-/* 2430 USB */
-MUX_CFG_24XX("AD9_2430_USB0_PUEN",	0x133,	4,	0,	0,	1)
-MUX_CFG_24XX("Y11_2430_USB0_VP",	0x134,	4,	0,	0,	1)
-MUX_CFG_24XX("AD7_2430_USB0_VM",	0x135,	4,	0,	0,	1)
-MUX_CFG_24XX("AE7_2430_USB0_RCV",	0x136,	4,	0,	0,	1)
-MUX_CFG_24XX("AD4_2430_USB0_TXEN",	0x137,	4,	0,	0,	1)
-MUX_CFG_24XX("AF9_2430_USB0_SE0",	0x138,	4,	0,	0,	1)
-MUX_CFG_24XX("AE6_2430_USB0_DAT",	0x139,	4,	0,	0,	1)
-MUX_CFG_24XX("AD24_2430_USB1_SE0",	0x107,	2,	0,	0,	1)
-MUX_CFG_24XX("AB24_2430_USB1_RCV",	0x108,	2,	0,	0,	1)
-MUX_CFG_24XX("Y25_2430_USB1_TXEN",	0x109,	2,	0,	0,	1)
-MUX_CFG_24XX("AA26_2430_USB1_DAT",	0x10A,	2,	0,	0,	1)
-
-/* 2430 HS-USB */
-MUX_CFG_24XX("AD9_2430_USB0HS_DATA3",	0x133,	0,	0,	0,	1)
-MUX_CFG_24XX("Y11_2430_USB0HS_DATA4",	0x134,	0,	0,	0,	1)
-MUX_CFG_24XX("AD7_2430_USB0HS_DATA5",	0x135,	0,	0,	0,	1)
-MUX_CFG_24XX("AE7_2430_USB0HS_DATA6",	0x136,	0,	0,	0,	1)
-MUX_CFG_24XX("AD4_2430_USB0HS_DATA2",	0x137,	0,	0,	0,	1)
-MUX_CFG_24XX("AF9_2430_USB0HS_DATA0",	0x138,	0,	0,	0,	1)
-MUX_CFG_24XX("AE6_2430_USB0HS_DATA1",	0x139,	0,	0,	0,	1)
-MUX_CFG_24XX("AE8_2430_USB0HS_CLK",	0x13A,	0,	0,	0,	1)
-MUX_CFG_24XX("AD8_2430_USB0HS_DIR",	0x13B,	0,	0,	0,	1)
-MUX_CFG_24XX("AE5_2430_USB0HS_STP",	0x13c,	0,	1,	1,	1)
-MUX_CFG_24XX("AE9_2430_USB0HS_NXT",	0x13D,	0,	0,	0,	1)
-MUX_CFG_24XX("AC7_2430_USB0HS_DATA7",	0x13E,	0,	0,	0,	1)
-
-/* 2430 McBSP */
-MUX_CFG_24XX("AD6_2430_MCBSP_CLKS",	0x011E,	0,	0,	0,	1)
-
-MUX_CFG_24XX("AB2_2430_MCBSP1_CLKR",	0x011A,	0,	0,	0,	1)
-MUX_CFG_24XX("AD5_2430_MCBSP1_FSR",	0x011B,	0,	0,	0,	1)
-MUX_CFG_24XX("AA1_2430_MCBSP1_DX",	0x011C,	0,	0,	0,	1)
-MUX_CFG_24XX("AF3_2430_MCBSP1_DR",	0x011D,	0,	0,	0,	1)
-MUX_CFG_24XX("AB3_2430_MCBSP1_FSX",	0x011F,	0,	0,	0,	1)
-MUX_CFG_24XX("Y9_2430_MCBSP1_CLKX",	0x0120,	0,	0,	0,	1)
-
-MUX_CFG_24XX("AC10_2430_MCBSP2_FSX",	0x012E,	1,	0,	0,	1)
-MUX_CFG_24XX("AD16_2430_MCBSP2_CLX",	0x012F,	1,	0,	0,	1)
-MUX_CFG_24XX("AE13_2430_MCBSP2_DX",	0x0130,	1,	0,	0,	1)
-MUX_CFG_24XX("AD13_2430_MCBSP2_DR",	0x0131,	1,	0,	0,	1)
-MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E,	0,	0,	0,	1)
-MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F,	0,	0,	0,	1)
-MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF",	0x0130,	0,	0,	0,	1)
-MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF",	0x0131,	0,	0,	0,	1)
-
-MUX_CFG_24XX("AC9_2430_MCBSP3_CLKX",	0x0103,	0,	0,	0,	1)
-MUX_CFG_24XX("AE4_2430_MCBSP3_FSX",	0x0104,	0,	0,	0,	1)
-MUX_CFG_24XX("AE2_2430_MCBSP3_DR",	0x0105,	0,	0,	0,	1)
-MUX_CFG_24XX("AF4_2430_MCBSP3_DX",	0x0106,	0,	0,	0,	1)
-
-MUX_CFG_24XX("N3_2430_MCBSP4_CLKX",	0x010B,	1,	0,	0,	1)
-MUX_CFG_24XX("AD23_2430_MCBSP4_DR",	0x010C,	1,	0,	0,	1)
-MUX_CFG_24XX("AB25_2430_MCBSP4_DX",	0x010D,	1,	0,	0,	1)
-MUX_CFG_24XX("AC25_2430_MCBSP4_FSX",	0x010E,	1,	0,	0,	1)
-
-MUX_CFG_24XX("AE16_2430_MCBSP5_CLKX",	0x00ED,	1,	0,	0,	1)
-MUX_CFG_24XX("AF12_2430_MCBSP5_FSX",	0x00ED,	1,	0,	0,	1)
-MUX_CFG_24XX("K7_2430_MCBSP5_DX",	0x00EF,	1,	0,	0,	1)
-MUX_CFG_24XX("M1_2430_MCBSP5_DR",	0x00F0,	1,	0,	0,	1)
-
-/* 2430 MCSPI1 */
-MUX_CFG_24XX("Y18_2430_MCSPI1_CLK",	0x010F,	0,	0,	0,	1)
-MUX_CFG_24XX("AD15_2430_MCSPI1_SIMO",	0x0110,	0,	0,	0,	1)
-MUX_CFG_24XX("AE17_2430_MCSPI1_SOMI",	0x0111,	0,	0,	0,	1)
-MUX_CFG_24XX("U1_2430_MCSPI1_CS0",	0x0112,	0,	0,	0,	1)
-
-/* Touchscreen GPIO */
-MUX_CFG_24XX("AF19_2430_GPIO_85",	0x0113,	3,	0,	0,	1)
-
-};
-
-#define OMAP24XX_PINS_SZ	ARRAY_SIZE(omap24xx_pins)
-
-#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-
-static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
-{
-	u16 orig;
-	u8 warn = 0, debug = 0;
-
-	orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-	debug = cfg->debug;
-#endif
-	warn = (orig != reg);
-	if (debug || warn)
-		printk(KERN_WARNING
-			"MUX: setup %s (0x%p): 0x%04x -> 0x%04x\n",
-			cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
-			orig, reg);
-}
-#else
-#define omap2_cfg_debug(x, y)	do {} while (0)
-#endif
-
-static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
-{
-	static DEFINE_SPINLOCK(mux_spin_lock);
-	unsigned long flags;
-	u8 reg = 0;
-
-	spin_lock_irqsave(&mux_spin_lock, flags);
-	reg |= cfg->mask & 0x7;
-	if (cfg->pull_val)
-		reg |= OMAP2_PULL_ENA;
-	if (cfg->pu_pd_val)
-		reg |= OMAP2_PULL_UP;
-	omap2_cfg_debug(cfg, reg);
-	omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
-	spin_unlock_irqrestore(&mux_spin_lock, flags);
-
-	return 0;
-}
-
-int __init omap2_mux_init(void)
-{
-	u32 mux_pbase;
-
-	if (cpu_is_omap2420())
-		mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
-	else if (cpu_is_omap2430())
-		mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
-	else
-		return -ENODEV;
-
-	mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
-	if (!mux_base) {
-		printk(KERN_ERR "mux: Could not ioremap\n");
-		return -ENODEV;
-	}
-
-	if (cpu_is_omap24xx()) {
-		arch_mux_cfg.pins	= omap24xx_pins;
-		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
-
-		return omap_mux_register(&arch_mux_cfg);
-	}
-
-	return 0;
-}
-
-#else
-int __init omap2_mux_init(void)
-{
-	return 0;
-}
-#endif	/* CONFIG_OMAP_MUX */
-
-/*----------------------------------------------------------------------------*/
-
-#ifdef CONFIG_ARCH_OMAP3
 static LIST_HEAD(muxmodes);
 static DEFINE_MUTEX(muxmode_mutex);
 
@@ -381,6 +85,9 @@ static char *omap_mux_options;
 int __init omap_mux_init_gpio(int gpio, int val)
 {
 	struct omap_mux_entry *e;
+	struct omap_mux *gpio_mux = NULL;
+	u16 old_mode;
+	u16 mux_mode;
 	int found = 0;
 
 	if (!gpio)
@@ -389,44 +96,45 @@ int __init omap_mux_init_gpio(int gpio, int val)
 	list_for_each_entry(e, &muxmodes, node) {
 		struct omap_mux *m = &e->mux;
 		if (gpio == m->gpio) {
-			u16 old_mode;
-			u16 mux_mode;
-
-			old_mode = omap_mux_read(m->reg_offset);
-			mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
-			mux_mode |= OMAP_MUX_MODE4;
-			printk(KERN_DEBUG "mux: Setting signal "
-				"%s.gpio%i 0x%04x -> 0x%04x\n",
-				m->muxnames[0], gpio, old_mode, mux_mode);
-			omap_mux_write(mux_mode, m->reg_offset);
+			gpio_mux = m;
 			found++;
 		}
 	}
 
-	if (found == 1)
-		return 0;
+	if (found == 0) {
+		printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+		return -ENODEV;
+	}
 
 	if (found > 1) {
-		printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio);
+		printk(KERN_INFO "mux: Multiple gpio paths (%d) for gpio%i\n",
+				found, gpio);
 		return -EINVAL;
 	}
 
-	printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+	old_mode = omap_mux_read(gpio_mux->reg_offset);
+	mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
+	if (omap_mux_flags & MUXABLE_GPIO_MODE3)
+		mux_mode |= OMAP_MUX_MODE3;
+	else
+		mux_mode |= OMAP_MUX_MODE4;
+	printk(KERN_DEBUG "mux: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n",
+			gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
+	omap_mux_write(mux_mode, gpio_mux->reg_offset);
 
-	return -ENODEV;
+	return 0;
 }
 
-int __init omap_mux_init_signal(char *muxname, int val)
+int __init omap_mux_init_signal(const char *muxname, int val)
 {
 	struct omap_mux_entry *e;
-	char *m0_name = NULL, *mode_name = NULL;
-	int found = 0;
+	const char *mode_name;
+	int found = 0, mode0_len = 0;
 
 	mode_name = strchr(muxname, '.');
 	if (mode_name) {
-		*mode_name = '\0';
+		mode0_len = strlen(muxname) - strlen(mode_name);
 		mode_name++;
-		m0_name = muxname;
 	} else {
 		mode_name = muxname;
 	}
@@ -436,9 +144,11 @@ int __init omap_mux_init_signal(char *muxname, int val)
 		char *m0_entry = m->muxnames[0];
 		int i;
 
-		if (m0_name && strcmp(m0_name, m0_entry))
+		/* First check for full name in mode0.muxmode format */
+		if (mode0_len && strncmp(muxname, m0_entry, mode0_len))
 			continue;
 
+		/* Then check for muxmode only */
 		for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
 			char *mode_cur = m->muxnames[i];
 
@@ -1032,6 +742,9 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 		return -ENODEV;
 	}
 
+	if (cpu_is_omap24xx())
+		omap_mux_flags = MUXABLE_GPIO_MODE3;
+
 	omap_mux_init_package(superset, package_subset, package_balls);
 	omap_mux_init_list(superset);
 	omap_mux_init_signals(board_mux);
@@ -1039,5 +752,3 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 	return 0;
 }
 
-#endif	/* CONFIG_ARCH_OMAP3 */
-
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 480abc56e605..350c04f27383 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -7,6 +7,8 @@
  * published by the Free Software Foundation.
  */
 
+#include "mux2420.h"
+#include "mux2430.h"
 #include "mux34xx.h"
 
 #define OMAP_MUX_TERMINATOR	0xffff
@@ -56,10 +58,12 @@
 
 /* Flags for omap_mux_init */
 #define OMAP_PACKAGE_MASK		0xffff
-#define OMAP_PACKAGE_CBP		4		/* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CUS		3		/* 423-pin 0.65 */
-#define OMAP_PACKAGE_CBB		2		/* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CBC		1		/* 515-pin 0.50 0.65 */
+#define OMAP_PACKAGE_CBP		6		/* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CUS		5		/* 423-pin 0.65 */
+#define OMAP_PACKAGE_CBB		4		/* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CBC		3		/* 515-pin 0.50 0.65 */
+#define OMAP_PACKAGE_ZAC		2		/* 24xx 447-pin POP */
+#define OMAP_PACKAGE_ZAF		1		/* 2420 447-pin SIP */
 
 
 #define OMAP_MUX_NR_MODES	8			/* Available modes */
@@ -102,7 +106,7 @@ struct omap_board_mux {
 	u16	value;
 };
 
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_OMAP_MUX)
 
 /**
  * omap_mux_init_gpio - initialize a signal based on the GPIO number
@@ -116,7 +120,7 @@ int omap_mux_init_gpio(int gpio, int val);
  * @muxname:		Mux name in mode0_name.signal_name format
  * @val:		Options for the mux register value
  */
-int omap_mux_init_signal(char *muxname, int val);
+int omap_mux_init_signal(const char *muxname, int val);
 
 #else
 
@@ -171,6 +175,20 @@ void omap_mux_write(u16 val, u16 mux_offset);
 void omap_mux_write_array(struct omap_board_mux *board_mux);
 
 /**
+ * omap2420_mux_init() - initialize mux system with board specific set
+ * @board_mux:		Board specific mux table
+ * @flags:		OMAP package type used for the board
+ */
+int omap2420_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
+ * omap2430_mux_init() - initialize mux system with board specific set
+ * @board_mux:		Board specific mux table
+ * @flags:		OMAP package type used for the board
+ */
+int omap2430_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
  * omap3_mux_init() - initialize mux system with board specific set
  * @board_mux:		Board specific mux table
  * @flags:		OMAP package type used for the board
diff --git a/arch/arm/mach-omap2/mux2420.c b/arch/arm/mach-omap2/mux2420.c
new file mode 100644
index 000000000000..414af5434456
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2420.c
@@ -0,0 +1,688 @@
+/*
+ * Copyright (C) 2010 Nokia
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
+}
+
+#else
+
+#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+}
+
+#endif
+
+#define _OMAP2420_BALLENTRY(M0, bb, bt)					\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.balls		= { bb, bt },					\
+}
+
+/*
+ * Superset of all mux modes for omap2420
+ */
+static struct omap_mux __initdata omap2420_muxmodes[] = {
+	_OMAP2420_MUXENTRY(CAM_D0, 54,
+		"cam_d0", "hw_dbg2", "sti_dout", "gpio_54",
+		NULL, NULL, "etk_d2", NULL),
+	_OMAP2420_MUXENTRY(CAM_D1, 53,
+		"cam_d1", "hw_dbg3", "sti_din", "gpio_53",
+		NULL, NULL, "etk_d3", NULL),
+	_OMAP2420_MUXENTRY(CAM_D2, 52,
+		"cam_d2", "hw_dbg4", "mcbsp1_clkx", "gpio_52",
+		NULL, NULL, "etk_d4", NULL),
+	_OMAP2420_MUXENTRY(CAM_D3, 51,
+		"cam_d3", "hw_dbg5", "mcbsp1_dr", "gpio_51",
+		NULL, NULL, "etk_d5", NULL),
+	_OMAP2420_MUXENTRY(CAM_D4, 50,
+		"cam_d4", "hw_dbg6", "mcbsp1_fsr", "gpio_50",
+		NULL, NULL, "etk_d6", NULL),
+	_OMAP2420_MUXENTRY(CAM_D5, 49,
+		"cam_d5", "hw_dbg7", "mcbsp1_clkr", "gpio_49",
+		NULL, NULL, "etk_d7", NULL),
+	_OMAP2420_MUXENTRY(CAM_D6, 0,
+		"cam_d6", "hw_dbg8", NULL, NULL,
+		NULL, NULL, "etk_d8", NULL),
+	_OMAP2420_MUXENTRY(CAM_D7, 0,
+		"cam_d7", "hw_dbg9", NULL, NULL,
+		NULL, NULL, "etk_d9", NULL),
+	_OMAP2420_MUXENTRY(CAM_D8, 54,
+		"cam_d8", "hw_dbg10", NULL, "gpio_54",
+		NULL, NULL, "etk_d10", NULL),
+	_OMAP2420_MUXENTRY(CAM_D9, 53,
+		"cam_d9", "hw_dbg11", NULL, "gpio_53",
+		NULL, NULL, "etk_d11", NULL),
+	_OMAP2420_MUXENTRY(CAM_HS, 55,
+		"cam_hs", "hw_dbg1", "mcbsp1_dx", "gpio_55",
+		NULL, NULL, "etk_d1", NULL),
+	_OMAP2420_MUXENTRY(CAM_LCLK, 57,
+		"cam_lclk", NULL, "mcbsp_clks", "gpio_57",
+		NULL, NULL, "etk_c1", NULL),
+	_OMAP2420_MUXENTRY(CAM_VS, 56,
+		"cam_vs", "hw_dbg0", "mcbsp1_fsx", "gpio_56",
+		NULL, NULL, "etk_d0", NULL),
+	_OMAP2420_MUXENTRY(CAM_XCLK, 0,
+		"cam_xclk", NULL, "sti_clk", NULL,
+		NULL, NULL, "etk_c2", NULL),
+	_OMAP2420_MUXENTRY(DSS_ACBIAS, 48,
+		"dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA10, 40,
+		"dss_data10", NULL, NULL, "gpio_40",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA11, 41,
+		"dss_data11", NULL, NULL, "gpio_41",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA12, 42,
+		"dss_data12", NULL, NULL, "gpio_42",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA13, 43,
+		"dss_data13", NULL, NULL, "gpio_43",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA14, 44,
+		"dss_data14", NULL, NULL, "gpio_44",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA15, 45,
+		"dss_data15", NULL, NULL, "gpio_45",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA16, 46,
+		"dss_data16", NULL, NULL, "gpio_46",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA17, 47,
+		"dss_data17", NULL, NULL, "gpio_47",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA8, 38,
+		"dss_data8", NULL, NULL, "gpio_38",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA9, 39,
+		"dss_data9", NULL, NULL, "gpio_39",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_DIN, 115,
+		"eac_ac_din", "mcbsp2_dr", NULL, "gpio_115",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_DOUT, 116,
+		"eac_ac_dout", "mcbsp2_dx", NULL, "gpio_116",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_FS, 114,
+		"eac_ac_fs", "mcbsp2_fsx", NULL, "gpio_114",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_MCLK, 117,
+		"eac_ac_mclk", NULL, NULL, "gpio_117",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_RST, 118,
+		"eac_ac_rst", "eac_bt_din", NULL, "gpio_118",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_SCLK, 113,
+		"eac_ac_sclk", "mcbsp2_clkx", NULL, "gpio_113",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_DIN, 73,
+		"eac_bt_din", NULL, NULL, "gpio_73",
+		NULL, NULL, "etk_d9", NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_DOUT, 74,
+		"eac_bt_dout", NULL, "sti_clk", "gpio_74",
+		NULL, NULL, "etk_d8", NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_FS, 72,
+		"eac_bt_fs", NULL, NULL, "gpio_72",
+		NULL, NULL, "etk_d10", NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_SCLK, 71,
+		"eac_bt_sclk", NULL, NULL, "gpio_71",
+		NULL, NULL, "etk_d11", NULL),
+	_OMAP2420_MUXENTRY(GPIO_119, 119,
+		"gpio_119", NULL, "sti_din", "gpio_119",
+		NULL, "sys_boot0", "etk_d12", NULL),
+	_OMAP2420_MUXENTRY(GPIO_120, 120,
+		"gpio_120", NULL, "sti_dout", "gpio_120",
+		"cam_d9", "sys_boot1", "etk_d13", NULL),
+	_OMAP2420_MUXENTRY(GPIO_121, 121,
+		"gpio_121", NULL, NULL, "gpio_121",
+		"jtag_emu2", "sys_boot2", "etk_d14", NULL),
+	_OMAP2420_MUXENTRY(GPIO_122, 122,
+		"gpio_122", NULL, NULL, "gpio_122",
+		"jtag_emu3", "sys_boot3", "etk_d15", NULL),
+	_OMAP2420_MUXENTRY(GPIO_124, 124,
+		"gpio_124", NULL, NULL, "gpio_124",
+		NULL, "sys_boot5", NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_125, 125,
+		"gpio_125", "sys_jtagsel1", "sys_jtagsel2", "gpio_125",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_36, 36,
+		"gpio_36", NULL, NULL, "gpio_36",
+		NULL, "sys_boot4", NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_62, 62,
+		"gpio_62", "uart1_rx", "usb1_dat", "gpio_62",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_6, 6,
+		"gpio_6", "tv_detpulse", NULL, "gpio_6",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A10, 3,
+		"gpmc_a10", NULL, "sys_ndmareq5", "gpio_3",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A1, 12,
+		"gpmc_a1", "dss_data18", NULL, "gpio_12",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A2, 11,
+		"gpmc_a2", "dss_data19", NULL, "gpio_11",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A3, 10,
+		"gpmc_a3", "dss_data20", NULL, "gpio_10",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A4, 9,
+		"gpmc_a4", "dss_data21", NULL, "gpio_9",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A5, 8,
+		"gpmc_a5", "dss_data22", NULL, "gpio_8",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A6, 7,
+		"gpmc_a6", "dss_data23", NULL, "gpio_7",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A7, 6,
+		"gpmc_a7", NULL, "sys_ndmareq2", "gpio_6",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A8, 5,
+		"gpmc_a8", NULL, "sys_ndmareq3", "gpio_5",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A9, 4,
+		"gpmc_a9", NULL, "sys_ndmareq4", "gpio_4",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_CLK, 21,
+		"gpmc_clk", NULL, NULL, "gpio_21",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D10, 18,
+		"gpmc_d10", "ssi2_rdy_rx", NULL, "gpio_18",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D11, 17,
+		"gpmc_d11", "ssi2_flag_rx", NULL, "gpio_17",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D12, 16,
+		"gpmc_d12", "ssi2_dat_rx", NULL, "gpio_16",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D13, 15,
+		"gpmc_d13", "ssi2_rdy_tx", NULL, "gpio_15",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D14, 14,
+		"gpmc_d14", "ssi2_flag_tx", NULL, "gpio_14",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D15, 13,
+		"gpmc_d15", "ssi2_dat_tx", NULL, "gpio_13",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D8, 20,
+		"gpmc_d8", NULL, NULL, "gpio_20",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D9, 19,
+		"gpmc_d9", "ssi2_wake", NULL, "gpio_19",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NBE0, 29,
+		"gpmc_nbe0", NULL, NULL, "gpio_29",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NBE1, 30,
+		"gpmc_nbe1", NULL, NULL, "gpio_30",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS1, 22,
+		"gpmc_ncs1", NULL, NULL, "gpio_22",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS2, 23,
+		"gpmc_ncs2", NULL, NULL, "gpio_23",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS3, 24,
+		"gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS4, 25,
+		"gpmc_ncs4", NULL, NULL, "gpio_25",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS5, 26,
+		"gpmc_ncs5", NULL, NULL, "gpio_26",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS6, 27,
+		"gpmc_ncs6", NULL, NULL, "gpio_27",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS7, 28,
+		"gpmc_ncs7", "gpmc_io_dir", "gpio_28", NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NWP, 31,
+		"gpmc_nwp", NULL, NULL, "gpio_31",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_WAIT1, 33,
+		"gpmc_wait1", NULL, NULL, "gpio_33",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_WAIT2, 34,
+		"gpmc_wait2", NULL, NULL, "gpio_34",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_WAIT3, 35,
+		"gpmc_wait3", NULL, NULL, "gpio_35",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(HDQ_SIO, 101,
+		"hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(I2C2_SCL, 99,
+		"i2c2_scl", NULL, "gpt9_pwm_evt", "gpio_99",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(I2C2_SDA, 100,
+		"i2c2_sda", NULL, "spi2_ncs1", "gpio_100",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(JTAG_EMU0, 127,
+		"jtag_emu0", NULL, NULL, "gpio_127",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(JTAG_EMU1, 126,
+		"jtag_emu1", NULL, NULL, "gpio_126",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_CLKR, 92,
+		"mcbsp1_clkr", "ssi2_dat_tx", "vlynq_tx1", "gpio_92",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_CLKX, 98,
+		"mcbsp1_clkx", "ssi2_wake", "vlynq_nla", "gpio_98",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_DR, 95,
+		"mcbsp1_dr", "ssi2_dat_rx", "vlynq_rx1", "gpio_95",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_DX, 94,
+		"mcbsp1_dx", "ssi2_rdy_tx", "vlynq_clk", "gpio_94",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_FSR, 93,
+		"mcbsp1_fsr", "ssi2_flag_tx", "vlynq_tx0", "gpio_93",
+		"spi2_ncs1", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_FSX, 97,
+		"mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP2_CLKX, 12,
+		"mcbsp2_clkx", NULL, "dss_data23", "gpio_12",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP2_DR, 11,
+		"mcbsp2_dr", NULL, "dss_data22", "gpio_11",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP_CLKS, 96,
+		"mcbsp_clks", "ssi2_flag_rx", "vlynq_rx0", "gpio_96",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CLKI, 59,
+		"sdmmc_clki", "ms_clki", NULL, "gpio_59",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CLKO, 0,
+		"sdmmc_clko", "ms_clko", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CMD_DIR, 8,
+		"sdmmc_cmd_dir", NULL, NULL, "gpio_8",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CMD, 0,
+		"sdmmc_cmd", "ms_bs", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR0, 7,
+		"sdmmc_dat_dir0", "ms_dat0_dir", NULL, "gpio_7",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT0, 0,
+		"sdmmc_dat0", "ms_dat0", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR1, 78,
+		"sdmmc_dat_dir1", "ms_datu_dir", "uart2_rts", "gpio_78",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT1, 75,
+		"sdmmc_dat1", "ms_dat1", NULL, "gpio_75",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR2, 79,
+		"sdmmc_dat_dir2", "ms_datu_dir", "uart2_tx", "gpio_79",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT2, 76,
+		"sdmmc_dat2", "ms_dat2", "uart2_cts", "gpio_76",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR3, 80,
+		"sdmmc_dat_dir3", "ms_datu_dir", "uart2_rx", "gpio_80",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT3, 77,
+		"sdmmc_dat3", "ms_dat3", NULL, "gpio_77",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_A12, 2,
+		"sdrc_a12", NULL, NULL, "gpio_2",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_A13, 1,
+		"sdrc_a13", NULL, NULL, "gpio_1",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_A14, 0,
+		"sdrc_a14", NULL, NULL, "gpio_0",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_CKE1, 38,
+		"sdrc_cke1", NULL, NULL, "gpio_38",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_NCS1, 37,
+		"sdrc_ncs1", NULL, NULL, "gpio_37",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_CLK, 81,
+		"spi1_clk", NULL, NULL, "gpio_81",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS0, 84,
+		"spi1_ncs0", NULL, NULL, "gpio_84",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS1, 85,
+		"spi1_ncs1", NULL, NULL, "gpio_85",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS2, 86,
+		"spi1_ncs2", NULL, NULL, "gpio_86",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS3, 87,
+		"spi1_ncs3", NULL, NULL, "gpio_87",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_SIMO, 82,
+		"spi1_simo", NULL, NULL, "gpio_82",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_SOMI, 83,
+		"spi1_somi", NULL, NULL, "gpio_83",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_CLK, 88,
+		"spi2_clk", NULL, NULL, "gpio_88",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_NCS0, 91,
+		"spi2_ncs0", "gpt12_pwm_evt", NULL, "gpio_91",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_SIMO, 89,
+		"spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_SOMI, 90,
+		"spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_DAT_RX, 63,
+		"ssi1_dat_rx", "eac_md_sclk", NULL, "gpio_63",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_DAT_TX, 59,
+		"ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_FLAG_RX, 64,
+		"ssi1_flag_rx", "eac_md_din", NULL, "gpio_64",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_FLAG_TX, 25,
+		"ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_25",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_RDY_RX, 65,
+		"ssi1_rdy_rx", "eac_md_dout", NULL, "gpio_65",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_RDY_TX, 61,
+		"ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_WAKE, 66,
+		"ssi1_wake", "eac_md_fs", NULL, "gpio_66",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SYS_CLKOUT, 123,
+		"sys_clkout", NULL, NULL, "gpio_123",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SYS_CLKREQ, 52,
+		"sys_clkreq", NULL, NULL, "gpio_52",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SYS_NIRQ, 60,
+		"sys_nirq", NULL, NULL, "gpio_60",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_CTS, 32,
+		"uart1_cts", NULL, "dss_data18", "gpio_32",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_RTS, 8,
+		"uart1_rts", NULL, "dss_data19", "gpio_8",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_RX, 10,
+		"uart1_rx", NULL, "dss_data21", "gpio_10",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_TX, 9,
+		"uart1_tx", NULL, "dss_data20", "gpio_9",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_CTS, 67,
+		"uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_RTS, 68,
+		"uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_RX, 70,
+		"uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_TX, 69,
+		"uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_CTS_RCTX, 102,
+		"uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_RTS_SD, 103,
+		"uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_RX_IRRX, 105,
+		"uart3_rx_irrx", NULL, NULL, "gpio_105",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_TX_IRTX, 104,
+		"uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_DAT, 112,
+		"usb0_dat", "uart3_rx_irrx", "uart2_rx", "gpio_112",
+		"uart2_tx", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_PUEN, 106,
+		"usb0_puen", "mcbsp2_dx", NULL, "gpio_106",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_RCV, 109,
+		"usb0_rcv", "mcbsp2_fsx", NULL, "gpio_109",
+		"uart2_cts", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_SE0, 111,
+		"usb0_se0", "uart3_tx_irtx", "uart2_tx", "gpio_111",
+		"uart2_rx", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_TXEN, 110,
+		"usb0_txen", "uart3_cts_rctx", "uart2_cts", "gpio_110",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_VM, 108,
+		"usb0_vm", "mcbsp2_clkx", NULL, "gpio_108",
+		"uart2_rx", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_VP, 107,
+		"usb0_vp", "mcbsp2_dr", NULL, "gpio_107",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_CLK, 13,
+		"vlynq_clk", "usb2_se0", "sys_ndmareq0", "gpio_13",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_NLA, 58,
+		"vlynq_nla", NULL, NULL, "gpio_58",
+		"cam_d6", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_RX0, 15,
+		"vlynq_rx0", "usb2_tllse0", NULL, "gpio_15",
+		"cam_d7", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_RX1, 14,
+		"vlynq_rx1", "usb2_rcv", "sys_ndmareq1", "gpio_14",
+		"cam_d8", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_TX0, 17,
+		"vlynq_tx0", "usb2_txen", NULL, "gpio_17",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_TX1, 16,
+		"vlynq_tx1", "usb2_dat", "sys_clkout2", "gpio_16",
+		NULL, NULL, NULL, NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Balls for 447-pin POP package
+ */
+#ifdef CONFIG_DEBUG_FS
+static struct omap_ball __initdata omap2420_pop_ball[] = {
+	_OMAP2420_BALLENTRY(CAM_D0, "y4", NULL),
+	_OMAP2420_BALLENTRY(CAM_D1, "y3", NULL),
+	_OMAP2420_BALLENTRY(CAM_D2, "u7", NULL),
+	_OMAP2420_BALLENTRY(CAM_D3, "ab3", NULL),
+	_OMAP2420_BALLENTRY(CAM_D4, "v2", NULL),
+	_OMAP2420_BALLENTRY(CAM_D5, "ad3", NULL),
+	_OMAP2420_BALLENTRY(CAM_D6, "aa4", NULL),
+	_OMAP2420_BALLENTRY(CAM_D7, "ab4", NULL),
+	_OMAP2420_BALLENTRY(CAM_D8, "ac6", NULL),
+	_OMAP2420_BALLENTRY(CAM_D9, "ac7", NULL),
+	_OMAP2420_BALLENTRY(CAM_HS, "v4", NULL),
+	_OMAP2420_BALLENTRY(CAM_LCLK, "ad6", NULL),
+	_OMAP2420_BALLENTRY(CAM_VS, "p7", NULL),
+	_OMAP2420_BALLENTRY(CAM_XCLK, "w4", NULL),
+	_OMAP2420_BALLENTRY(DSS_ACBIAS, "ae8", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA10, "ac12", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA11, "ae11", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA12, "ae13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA13, "ad13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA14, "ac13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA15, "y12", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA16, "ad14", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA17, "y13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA8, "ad11", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA9, "ad12", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_DIN, "ad19", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_DOUT, "af22", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_FS, "ad16", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_MCLK, "y17", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_RST, "ae22", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_SCLK, "ac18", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_DIN, "u8", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_DOUT, "ad5", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_FS, "w7", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_SCLK, "ad4", NULL),
+	_OMAP2420_BALLENTRY(GPIO_119, "af6", NULL),
+	_OMAP2420_BALLENTRY(GPIO_120, "af4", NULL),
+	_OMAP2420_BALLENTRY(GPIO_121, "ae6", NULL),
+	_OMAP2420_BALLENTRY(GPIO_122, "w3", NULL),
+	_OMAP2420_BALLENTRY(GPIO_124, "y19", NULL),
+	_OMAP2420_BALLENTRY(GPIO_125, "ae24", NULL),
+	_OMAP2420_BALLENTRY(GPIO_36, "y18", NULL),
+	_OMAP2420_BALLENTRY(GPIO_6, "d6", NULL),
+	_OMAP2420_BALLENTRY(GPIO_62, "ad18", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A1, "m8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A10, "d5", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A2, "w9", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A3, "af10", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A4, "w8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A5, "ae16", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A6, "af9", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A7, "e4", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A8, "j7", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A9, "ae18", NULL),
+	_OMAP2420_BALLENTRY(GPMC_CLK, "p1", "l1"),
+	_OMAP2420_BALLENTRY(GPMC_D10, "t1", "n1"),
+	_OMAP2420_BALLENTRY(GPMC_D11, "u2", "p2"),
+	_OMAP2420_BALLENTRY(GPMC_D12, "u1", "p1"),
+	_OMAP2420_BALLENTRY(GPMC_D13, "p2", "m1"),
+	_OMAP2420_BALLENTRY(GPMC_D14, "h2", "j2"),
+	_OMAP2420_BALLENTRY(GPMC_D15, "h1", "k2"),
+	_OMAP2420_BALLENTRY(GPMC_D8, "v1", "r1"),
+	_OMAP2420_BALLENTRY(GPMC_D9, "y1", "t1"),
+	_OMAP2420_BALLENTRY(GPMC_NBE0, "af12", "aa10"),
+	_OMAP2420_BALLENTRY(GPMC_NBE1, "u3", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS1, "af14", "w1"),
+	_OMAP2420_BALLENTRY(GPMC_NCS2, "g4", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS3, "t8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS4, "h8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS5, "k3", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS6, "m7", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS7, "p3", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NWP, "ae15", "y5"),
+	_OMAP2420_BALLENTRY(GPMC_WAIT1, "ae20", "y8"),
+	_OMAP2420_BALLENTRY(GPMC_WAIT2, "n2", NULL),
+	_OMAP2420_BALLENTRY(GPMC_WAIT3, "t4", NULL),
+	_OMAP2420_BALLENTRY(HDQ_SIO, "t23", NULL),
+	_OMAP2420_BALLENTRY(I2C2_SCL, "l2", NULL),
+	_OMAP2420_BALLENTRY(I2C2_SDA, "k19", NULL),
+	_OMAP2420_BALLENTRY(JTAG_EMU0, "n24", NULL),
+	_OMAP2420_BALLENTRY(JTAG_EMU1, "ac22", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_CLKR, "y24", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_CLKX, "t19", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_DR, "u23", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_DX, "r24", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_FSR, "r20", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_FSX, "r23", NULL),
+	_OMAP2420_BALLENTRY(MCBSP2_CLKX, "t24", NULL),
+	_OMAP2420_BALLENTRY(MCBSP2_DR, "p20", NULL),
+	_OMAP2420_BALLENTRY(MCBSP_CLKS, "p23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CLKI, "c23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CLKO, "h23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CMD, "j23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CMD_DIR, "j24", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT0, "h17", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR0, "f23", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT1, "g19", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR1, "d23", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT2, "h20", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR2, "g23", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT3, "d24", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR3, "e23", NULL),
+	_OMAP2420_BALLENTRY(SDRC_A12, "w26", "r21"),
+	_OMAP2420_BALLENTRY(SDRC_A13, "w25", "aa15"),
+	_OMAP2420_BALLENTRY(SDRC_A14, "aa26", "y12"),
+	_OMAP2420_BALLENTRY(SDRC_CKE1, "ae25", "y13"),
+	_OMAP2420_BALLENTRY(SDRC_NCS1, "y25", "t20"),
+	_OMAP2420_BALLENTRY(SPI1_CLK, "y23", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS0, "w24", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS1, "w23", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS2, "v23", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS3, "u20", NULL),
+	_OMAP2420_BALLENTRY(SPI1_SIMO, "h10", NULL),
+	_OMAP2420_BALLENTRY(SPI1_SOMI, "v19", NULL),
+	_OMAP2420_BALLENTRY(SPI2_CLK, "v24", NULL),
+	_OMAP2420_BALLENTRY(SPI2_NCS0, "aa24", NULL),
+	_OMAP2420_BALLENTRY(SPI2_SIMO, "u24", NULL),
+	_OMAP2420_BALLENTRY(SPI2_SOMI, "v25", NULL),
+	_OMAP2420_BALLENTRY(SSI1_DAT_RX, "w15", NULL),
+	_OMAP2420_BALLENTRY(SSI1_DAT_TX, "w13", NULL),
+	_OMAP2420_BALLENTRY(SSI1_FLAG_RX, "af11", NULL),
+	_OMAP2420_BALLENTRY(SSI1_FLAG_TX, "ac15", NULL),
+	_OMAP2420_BALLENTRY(SSI1_RDY_RX, "ac16", NULL),
+	_OMAP2420_BALLENTRY(SSI1_RDY_TX, "af15", NULL),
+	_OMAP2420_BALLENTRY(SSI1_WAKE, "ad15", NULL),
+	_OMAP2420_BALLENTRY(SYS_CLKOUT, "ae19", NULL),
+	_OMAP2420_BALLENTRY(SYS_CLKREQ, "ad20", NULL),
+	_OMAP2420_BALLENTRY(SYS_NIRQ, "y20", NULL),
+	_OMAP2420_BALLENTRY(UART1_CTS, "g20", NULL),
+	_OMAP2420_BALLENTRY(UART1_RTS, "k20", NULL),
+	_OMAP2420_BALLENTRY(UART1_RX, "t20", NULL),
+	_OMAP2420_BALLENTRY(UART1_TX, "h12", NULL),
+	_OMAP2420_BALLENTRY(UART2_CTS, "ac24", NULL),
+	_OMAP2420_BALLENTRY(UART2_RTS, "w20", NULL),
+	_OMAP2420_BALLENTRY(UART2_RX, "ad24", NULL),
+	_OMAP2420_BALLENTRY(UART2_TX, "ab24", NULL),
+	_OMAP2420_BALLENTRY(UART3_CTS_RCTX, "k24", NULL),
+	_OMAP2420_BALLENTRY(UART3_RTS_SD, "m20", NULL),
+	_OMAP2420_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
+	_OMAP2420_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
+	_OMAP2420_BALLENTRY(USB0_DAT, "j25", NULL),
+	_OMAP2420_BALLENTRY(USB0_PUEN, "l23", NULL),
+	_OMAP2420_BALLENTRY(USB0_RCV, "k23", NULL),
+	_OMAP2420_BALLENTRY(USB0_SE0, "l24", NULL),
+	_OMAP2420_BALLENTRY(USB0_TXEN, "m24", NULL),
+	_OMAP2420_BALLENTRY(USB0_VM, "n23", NULL),
+	_OMAP2420_BALLENTRY(USB0_VP, "m23", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_CLK, "w12", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_NLA, "ae10", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_RX0, "ad7", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_RX1, "w10", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_TX0, "y15", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_TX1, "w14", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap2420_pop_ball	 NULL
+#endif
+
+int __init omap2420_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+	struct omap_ball *package_balls = NULL;
+
+	switch (flags & OMAP_PACKAGE_MASK) {
+	case OMAP_PACKAGE_ZAC:
+		package_balls = omap2420_pop_ball;
+		break;
+	case OMAP_PACKAGE_ZAF:
+		/* REVISIT: Please add data */
+	default:
+		pr_warning("mux: No ball data available for omap2420 package\n");
+	}
+
+	return omap_mux_init(OMAP2420_CONTROL_PADCONF_MUX_PBASE,
+			     OMAP2420_CONTROL_PADCONF_MUX_SIZE,
+				omap2420_muxmodes, NULL, board_subset,
+				package_balls);
+}
diff --git a/arch/arm/mach-omap2/mux2420.h b/arch/arm/mach-omap2/mux2420.h
new file mode 100644
index 000000000000..0f555aa847b5
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2420.h
@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP2420_CONTROL_PADCONF_MUX_PBASE			0x48000030LU
+
+#define OMAP2420_MUX(mode0, mux_value)					\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##mode0##_OFFSET),	\
+	.value		= (mux_value),					\
+}
+
+/*
+ * OMAP2420 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM.  Add 0x48000030 to these values to get the
+ * absolute addresses.  The name in the macro is the mode-0 name of
+ * the pin.  NOTE: These registers are 8-bits wide.
+ */
+#define OMAP2420_CONTROL_PADCONF_SDRC_A14_OFFSET			0x000
+#define OMAP2420_CONTROL_PADCONF_SDRC_A13_OFFSET			0x001
+#define OMAP2420_CONTROL_PADCONF_SDRC_A12_OFFSET			0x002
+#define OMAP2420_CONTROL_PADCONF_SDRC_BA1_OFFSET			0x003
+#define OMAP2420_CONTROL_PADCONF_SDRC_BA0_OFFSET			0x004
+#define OMAP2420_CONTROL_PADCONF_SDRC_A11_OFFSET			0x005
+#define OMAP2420_CONTROL_PADCONF_SDRC_A10_OFFSET			0x006
+#define OMAP2420_CONTROL_PADCONF_SDRC_A9_OFFSET				0x007
+#define OMAP2420_CONTROL_PADCONF_SDRC_A8_OFFSET				0x008
+#define OMAP2420_CONTROL_PADCONF_SDRC_A7_OFFSET				0x009
+#define OMAP2420_CONTROL_PADCONF_SDRC_A6_OFFSET				0x00a
+#define OMAP2420_CONTROL_PADCONF_SDRC_A5_OFFSET				0x00b
+#define OMAP2420_CONTROL_PADCONF_SDRC_A4_OFFSET				0x00c
+#define OMAP2420_CONTROL_PADCONF_SDRC_A3_OFFSET				0x00d
+#define OMAP2420_CONTROL_PADCONF_SDRC_A2_OFFSET				0x00e
+#define OMAP2420_CONTROL_PADCONF_SDRC_A1_OFFSET				0x00f
+#define OMAP2420_CONTROL_PADCONF_SDRC_A0_OFFSET				0x010
+#define OMAP2420_CONTROL_PADCONF_SDRC_D31_OFFSET			0x021
+#define OMAP2420_CONTROL_PADCONF_SDRC_D30_OFFSET			0x022
+#define OMAP2420_CONTROL_PADCONF_SDRC_D29_OFFSET			0x023
+#define OMAP2420_CONTROL_PADCONF_SDRC_D28_OFFSET			0x024
+#define OMAP2420_CONTROL_PADCONF_SDRC_D27_OFFSET			0x025
+#define OMAP2420_CONTROL_PADCONF_SDRC_D26_OFFSET			0x026
+#define OMAP2420_CONTROL_PADCONF_SDRC_D25_OFFSET			0x027
+#define OMAP2420_CONTROL_PADCONF_SDRC_D24_OFFSET			0x028
+#define OMAP2420_CONTROL_PADCONF_SDRC_D23_OFFSET			0x029
+#define OMAP2420_CONTROL_PADCONF_SDRC_D22_OFFSET			0x02a
+#define OMAP2420_CONTROL_PADCONF_SDRC_D21_OFFSET			0x02b
+#define OMAP2420_CONTROL_PADCONF_SDRC_D20_OFFSET			0x02c
+#define OMAP2420_CONTROL_PADCONF_SDRC_D19_OFFSET			0x02d
+#define OMAP2420_CONTROL_PADCONF_SDRC_D18_OFFSET			0x02e
+#define OMAP2420_CONTROL_PADCONF_SDRC_D17_OFFSET			0x02f
+#define OMAP2420_CONTROL_PADCONF_SDRC_D16_OFFSET			0x030
+#define OMAP2420_CONTROL_PADCONF_SDRC_D15_OFFSET			0x031
+#define OMAP2420_CONTROL_PADCONF_SDRC_D14_OFFSET			0x032
+#define OMAP2420_CONTROL_PADCONF_SDRC_D13_OFFSET			0x033
+#define OMAP2420_CONTROL_PADCONF_SDRC_D12_OFFSET			0x034
+#define OMAP2420_CONTROL_PADCONF_SDRC_D11_OFFSET			0x035
+#define OMAP2420_CONTROL_PADCONF_SDRC_D10_OFFSET			0x036
+#define OMAP2420_CONTROL_PADCONF_SDRC_D9_OFFSET				0x037
+#define OMAP2420_CONTROL_PADCONF_SDRC_D8_OFFSET				0x038
+#define OMAP2420_CONTROL_PADCONF_SDRC_D7_OFFSET				0x039
+#define OMAP2420_CONTROL_PADCONF_SDRC_D6_OFFSET				0x03a
+#define OMAP2420_CONTROL_PADCONF_SDRC_D5_OFFSET				0x03b
+#define OMAP2420_CONTROL_PADCONF_SDRC_D4_OFFSET				0x03c
+#define OMAP2420_CONTROL_PADCONF_SDRC_D3_OFFSET				0x03d
+#define OMAP2420_CONTROL_PADCONF_SDRC_D2_OFFSET				0x03e
+#define OMAP2420_CONTROL_PADCONF_SDRC_D1_OFFSET				0x03f
+#define OMAP2420_CONTROL_PADCONF_SDRC_D0_OFFSET				0x040
+#define OMAP2420_CONTROL_PADCONF_GPMC_A10_OFFSET			0x041
+#define OMAP2420_CONTROL_PADCONF_GPMC_A9_OFFSET				0x042
+#define OMAP2420_CONTROL_PADCONF_GPMC_A8_OFFSET				0x043
+#define OMAP2420_CONTROL_PADCONF_GPMC_A7_OFFSET				0x044
+#define OMAP2420_CONTROL_PADCONF_GPMC_A6_OFFSET				0x045
+#define OMAP2420_CONTROL_PADCONF_GPMC_A5_OFFSET				0x046
+#define OMAP2420_CONTROL_PADCONF_GPMC_A4_OFFSET				0x047
+#define OMAP2420_CONTROL_PADCONF_GPMC_A3_OFFSET				0x048
+#define OMAP2420_CONTROL_PADCONF_GPMC_A2_OFFSET				0x049
+#define OMAP2420_CONTROL_PADCONF_GPMC_A1_OFFSET				0x04a
+#define OMAP2420_CONTROL_PADCONF_GPMC_D15_OFFSET			0x04b
+#define OMAP2420_CONTROL_PADCONF_GPMC_D14_OFFSET			0x04c
+#define OMAP2420_CONTROL_PADCONF_GPMC_D13_OFFSET			0x04d
+#define OMAP2420_CONTROL_PADCONF_GPMC_D12_OFFSET			0x04e
+#define OMAP2420_CONTROL_PADCONF_GPMC_D11_OFFSET			0x04f
+#define OMAP2420_CONTROL_PADCONF_GPMC_D10_OFFSET			0x050
+#define OMAP2420_CONTROL_PADCONF_GPMC_D9_OFFSET				0x051
+#define OMAP2420_CONTROL_PADCONF_GPMC_D8_OFFSET				0x052
+#define OMAP2420_CONTROL_PADCONF_GPMC_D7_OFFSET				0x053
+#define OMAP2420_CONTROL_PADCONF_GPMC_D6_OFFSET				0x054
+#define OMAP2420_CONTROL_PADCONF_GPMC_D5_OFFSET				0x055
+#define OMAP2420_CONTROL_PADCONF_GPMC_D4_OFFSET				0x056
+#define OMAP2420_CONTROL_PADCONF_GPMC_D3_OFFSET				0x057
+#define OMAP2420_CONTROL_PADCONF_GPMC_D2_OFFSET				0x058
+#define OMAP2420_CONTROL_PADCONF_GPMC_D1_OFFSET				0x059
+#define OMAP2420_CONTROL_PADCONF_GPMC_D0_OFFSET				0x05a
+#define OMAP2420_CONTROL_PADCONF_GPMC_CLK_OFFSET			0x05b
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS0_OFFSET			0x05c
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS1_OFFSET			0x05d
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS2_OFFSET			0x05e
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS3_OFFSET			0x05f
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS4_OFFSET			0x060
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS5_OFFSET			0x061
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS6_OFFSET			0x062
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS7_OFFSET			0x063
+#define OMAP2420_CONTROL_PADCONF_GPMC_NALE_ALE_OFFSET			0x064
+#define OMAP2420_CONTROL_PADCONF_GPMC_NOE_OFFSET			0x065
+#define OMAP2420_CONTROL_PADCONF_GPMC_NWE_OFFSET			0x066
+#define OMAP2420_CONTROL_PADCONF_GPMC_NBE0_OFFSET			0x067
+#define OMAP2420_CONTROL_PADCONF_GPMC_NBE1_OFFSET			0x068
+#define OMAP2420_CONTROL_PADCONF_GPMC_NWP_OFFSET			0x069
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT0_OFFSET			0x06a
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT1_OFFSET			0x06b
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT2_OFFSET			0x06c
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT3_OFFSET			0x06d
+#define OMAP2420_CONTROL_PADCONF_SDRC_CLK_OFFSET			0x06e
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCLK_OFFSET			0x06f
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCS0_OFFSET			0x070
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCS1_OFFSET			0x071
+#define OMAP2420_CONTROL_PADCONF_SDRC_CKE0_OFFSET			0x072
+#define OMAP2420_CONTROL_PADCONF_SDRC_CKE1_OFFSET			0x073
+#define OMAP2420_CONTROL_PADCONF_SDRC_NRAS_OFFSET			0x074
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCAS_OFFSET			0x075
+#define OMAP2420_CONTROL_PADCONF_SDRC_NWE_OFFSET			0x076
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM0_OFFSET			0x077
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM1_OFFSET			0x078
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM2_OFFSET			0x079
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM3_OFFSET			0x07a
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS0_OFFSET			0x07f
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS1_OFFSET			0x080
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS2_OFFSET			0x081
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS3_OFFSET			0x082
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA0_OFFSET			0x083
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA1_OFFSET			0x084
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA2_OFFSET			0x085
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA3_OFFSET			0x086
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA4_OFFSET			0x087
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA5_OFFSET			0x088
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA6_OFFSET			0x089
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA7_OFFSET			0x08a
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA8_OFFSET			0x08b
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA9_OFFSET			0x08c
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA10_OFFSET			0x08d
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA11_OFFSET			0x08e
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA12_OFFSET			0x08f
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA13_OFFSET			0x090
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA14_OFFSET			0x091
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA15_OFFSET			0x092
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA16_OFFSET			0x093
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA17_OFFSET			0x094
+#define OMAP2420_CONTROL_PADCONF_UART1_CTS_OFFSET			0x095
+#define OMAP2420_CONTROL_PADCONF_UART1_RTS_OFFSET			0x096
+#define OMAP2420_CONTROL_PADCONF_UART1_TX_OFFSET			0x097
+#define OMAP2420_CONTROL_PADCONF_UART1_RX_OFFSET			0x098
+#define OMAP2420_CONTROL_PADCONF_MCBSP2_DR_OFFSET			0x099
+#define OMAP2420_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET			0x09a
+#define OMAP2420_CONTROL_PADCONF_DSS_PCL_OFFSET				0x09b
+#define OMAP2420_CONTROL_PADCONF_DSS_VSYNC_OFFSET			0x09c
+#define OMAP2420_CONTROL_PADCONF_DSS_HSYNC_OFFSET			0x09d
+#define OMAP2420_CONTROL_PADCONF_DSS_ACBIAS_OFFSET			0x09e
+#define OMAP2420_CONTROL_PADCONF_CAM_D9_OFFSET				0x09f
+#define OMAP2420_CONTROL_PADCONF_CAM_D8_OFFSET				0x0a0
+#define OMAP2420_CONTROL_PADCONF_CAM_D7_OFFSET				0x0a1
+#define OMAP2420_CONTROL_PADCONF_CAM_D6_OFFSET				0x0a2
+#define OMAP2420_CONTROL_PADCONF_CAM_D5_OFFSET				0x0a3
+#define OMAP2420_CONTROL_PADCONF_CAM_D4_OFFSET				0x0a4
+#define OMAP2420_CONTROL_PADCONF_CAM_D3_OFFSET				0x0a5
+#define OMAP2420_CONTROL_PADCONF_CAM_D2_OFFSET				0x0a6
+#define OMAP2420_CONTROL_PADCONF_CAM_D1_OFFSET				0x0a7
+#define OMAP2420_CONTROL_PADCONF_CAM_D0_OFFSET				0x0a8
+#define OMAP2420_CONTROL_PADCONF_CAM_HS_OFFSET				0x0a9
+#define OMAP2420_CONTROL_PADCONF_CAM_VS_OFFSET				0x0aa
+#define OMAP2420_CONTROL_PADCONF_CAM_LCLK_OFFSET			0x0ab
+#define OMAP2420_CONTROL_PADCONF_CAM_XCLK_OFFSET			0x0ac
+#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET			0x0ad
+#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET			0x0ae
+#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET			0x0af
+#define OMAP2420_CONTROL_PADCONF_GPIO_62_OFFSET				0x0b0
+#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET			0x0b1
+#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET			0x0b2
+#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET			0x0b3
+#define OMAP2420_CONTROL_PADCONF_SSI1_WAKE_OFFSET			0x0b4
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_CLK_OFFSET			0x0b5
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX1_OFFSET			0x0b6
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX0_OFFSET			0x0b7
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX1_OFFSET			0x0b8
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX0_OFFSET			0x0b9
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_NLA_OFFSET			0x0ba
+#define OMAP2420_CONTROL_PADCONF_UART2_CTS_OFFSET			0x0bb
+#define OMAP2420_CONTROL_PADCONF_UART2_RTS_OFFSET			0x0bc
+#define OMAP2420_CONTROL_PADCONF_UART2_TX_OFFSET			0x0bd
+#define OMAP2420_CONTROL_PADCONF_UART2_RX_OFFSET			0x0be
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_SCLK_OFFSET			0x0bf
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_FS_OFFSET			0x0c0
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_DIN_OFFSET			0x0c1
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_DOUT_OFFSET			0x0c2
+#define OMAP2420_CONTROL_PADCONF_MMC_CLKO_OFFSET			0x0c3
+#define OMAP2420_CONTROL_PADCONF_MMC_CMD_OFFSET				0x0c4
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT0_OFFSET			0x0c5
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT1_OFFSET			0x0c6
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT2_OFFSET			0x0c7
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT3_OFFSET			0x0c8
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR0_OFFSET			0x0c9
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR1_OFFSET			0x0ca
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR2_OFFSET			0x0cb
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR3_OFFSET			0x0cc
+#define OMAP2420_CONTROL_PADCONF_MMC_CMD_DIR_OFFSET			0x0cd
+#define OMAP2420_CONTROL_PADCONF_MMC_CLKI_OFFSET			0x0ce
+#define OMAP2420_CONTROL_PADCONF_SPI1_CLK_OFFSET			0x0cf
+#define OMAP2420_CONTROL_PADCONF_SPI1_SIMO_OFFSET			0x0d0
+#define OMAP2420_CONTROL_PADCONF_SPI1_SOMI_OFFSET			0x0d1
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS0_OFFSET			0x0d2
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS1_OFFSET			0x0d3
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS2_OFFSET			0x0d4
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS3_OFFSET			0x0d5
+#define OMAP2420_CONTROL_PADCONF_SPI2_CLK_OFFSET			0x0d6
+#define OMAP2420_CONTROL_PADCONF_SPI2_SIMO_OFFSET			0x0d7
+#define OMAP2420_CONTROL_PADCONF_SPI2_SOMI_OFFSET			0x0d8
+#define OMAP2420_CONTROL_PADCONF_SPI2_NCS0_OFFSET			0x0d9
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET			0x0da
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSR_OFFSET			0x0db
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_DX_OFFSET			0x0dc
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_DR_OFFSET			0x0dd
+#define OMAP2420_CONTROL_PADCONF_MCBSP_CLKS_OFFSET			0x0de
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSX_OFFSET			0x0df
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET			0x0e0
+#define OMAP2420_CONTROL_PADCONF_I2C1_SCL_OFFSET			0x0e1
+#define OMAP2420_CONTROL_PADCONF_I2C1_SDA_OFFSET			0x0e2
+#define OMAP2420_CONTROL_PADCONF_I2C2_SCL_OFFSET			0x0e3
+#define OMAP2420_CONTROL_PADCONF_I2C2_SDA_OFFSET			0x0e4
+#define OMAP2420_CONTROL_PADCONF_HDQ_SIO_OFFSET				0x0e5
+#define OMAP2420_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET			0x0e6
+#define OMAP2420_CONTROL_PADCONF_UART3_RTS_SD_OFFSET			0x0e7
+#define OMAP2420_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET			0x0e8
+#define OMAP2420_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET			0x0e9
+#define OMAP2420_CONTROL_PADCONF_TV_CVBS_OFFSET				0x0ea
+#define OMAP2420_CONTROL_PADCONF_TV_VREF_OFFSET				0x0eb
+#define OMAP2420_CONTROL_PADCONF_TV_RREF_OFFSET				0x0ec
+#define OMAP2420_CONTROL_PADCONF_USB0_PUEN_OFFSET			0x0ed
+#define OMAP2420_CONTROL_PADCONF_USB0_VP_OFFSET				0x0ee
+#define OMAP2420_CONTROL_PADCONF_USB0_VM_OFFSET				0x0ef
+#define OMAP2420_CONTROL_PADCONF_USB0_RCV_OFFSET			0x0f0
+#define OMAP2420_CONTROL_PADCONF_USB0_TXEN_OFFSET			0x0f1
+#define OMAP2420_CONTROL_PADCONF_USB0_SE0_OFFSET			0x0f2
+#define OMAP2420_CONTROL_PADCONF_USB0_DAT_OFFSET			0x0f3
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_SCLK_OFFSET			0x0f4
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_FS_OFFSET			0x0f5
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_DIN_OFFSET			0x0f6
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_DOUT_OFFSET			0x0f7
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_MCLK_OFFSET			0x0f8
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_RST_OFFSET			0x0f9
+#define OMAP2420_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET			0x0fa
+#define OMAP2420_CONTROL_PADCONF_SYS_NRESWARM_OFFSET			0x0fb
+#define OMAP2420_CONTROL_PADCONF_SYS_NIRQ_OFFSET			0x0fc
+#define OMAP2420_CONTROL_PADCONF_SYS_NV_OFFSET				0x0fd
+#define OMAP2420_CONTROL_PADCONF_GPIO_119_OFFSET			0x0fe
+#define OMAP2420_CONTROL_PADCONF_GPIO_120_OFFSET			0x0ff
+#define OMAP2420_CONTROL_PADCONF_GPIO_121_OFFSET			0x100
+#define OMAP2420_CONTROL_PADCONF_GPIO_122_OFFSET			0x101
+#define OMAP2420_CONTROL_PADCONF_SYS_32K_OFFSET				0x102
+#define OMAP2420_CONTROL_PADCONF_SYS_XTALIN_OFFSET			0x103
+#define OMAP2420_CONTROL_PADCONF_SYS_XTALOUT_OFFSET			0x104
+#define OMAP2420_CONTROL_PADCONF_GPIO_36_OFFSET				0x105
+#define OMAP2420_CONTROL_PADCONF_SYS_CLKREQ_OFFSET			0x106
+#define OMAP2420_CONTROL_PADCONF_SYS_CLKOUT_OFFSET			0x107
+#define OMAP2420_CONTROL_PADCONF_GPIO_6_OFFSET				0x108
+#define OMAP2420_CONTROL_PADCONF_GPIO_124_OFFSET			0x109
+#define OMAP2420_CONTROL_PADCONF_GPIO_125_OFFSET			0x10a
+#define OMAP2420_CONTROL_PADCONF_JTAG_EMU1_OFFSET			0x10b
+#define OMAP2420_CONTROL_PADCONF_JTAG_EMU0_OFFSET			0x10c
+#define OMAP2420_CONTROL_PADCONF_JTAG_NTRST_OFFSET			0x10d
+#define OMAP2420_CONTROL_PADCONF_JTAG_TCK_OFFSET			0x10e
+#define OMAP2420_CONTROL_PADCONF_JTAG_RTCK_OFFSET			0x10f
+#define OMAP2420_CONTROL_PADCONF_JTAG_TMS_OFFSET			0x110
+#define OMAP2420_CONTROL_PADCONF_JTAG_TDI_OFFSET			0x111
+#define OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET			0x112
+
+#define OMAP2420_CONTROL_PADCONF_MUX_SIZE			\
+		(OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x1)
diff --git a/arch/arm/mach-omap2/mux2430.c b/arch/arm/mach-omap2/mux2430.c
new file mode 100644
index 000000000000..84d2c5a7ecd7
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2430.c
@@ -0,0 +1,791 @@
+/*
+ * Copyright (C) 2010 Nokia
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
+}
+
+#else
+
+#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+}
+
+#endif
+
+#define _OMAP2430_BALLENTRY(M0, bb, bt)					\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.balls		= { bb, bt },					\
+}
+
+/*
+ * Superset of all mux modes for omap2430
+ */
+static struct omap_mux __initdata omap2430_muxmodes[] = {
+	_OMAP2430_MUXENTRY(CAM_D0, 133,
+		"cam_d0", "hw_dbg0", "sti_dout", "gpio_133",
+		NULL, NULL, "etk_d2", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D10, 146,
+		"cam_d10", NULL, NULL, "gpio_146",
+		NULL, NULL, "etk_d12", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D11, 145,
+		"cam_d11", NULL, NULL, "gpio_145",
+		NULL, NULL, "etk_d13", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D1, 132,
+		"cam_d1", "hw_dbg1", "sti_din", "gpio_132",
+		NULL, NULL, "etk_d3", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D2, 129,
+		"cam_d2", "hw_dbg2", "mcbsp1_clkx", "gpio_129",
+		NULL, NULL, "etk_d4", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D3, 128,
+		"cam_d3", "hw_dbg3", "mcbsp1_dr", "gpio_128",
+		NULL, NULL, "etk_d5", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D4, 143,
+		"cam_d4", "hw_dbg4", "mcbsp1_fsr", "gpio_143",
+		NULL, NULL, "etk_d6", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D5, 112,
+		"cam_d5", "hw_dbg5", "mcbsp1_clkr", "gpio_112",
+		NULL, NULL, "etk_d7", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D6, 137,
+		"cam_d6", "hw_dbg6", NULL, "gpio_137",
+		NULL, NULL, "etk_d8", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D7, 136,
+		"cam_d7", "hw_dbg7", NULL, "gpio_136",
+		NULL, NULL, "etk_d9", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D8, 135,
+		"cam_d8", "hw_dbg8", NULL, "gpio_135",
+		NULL, NULL, "etk_d10", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D9, 134,
+		"cam_d9", "hw_dbg9", NULL, "gpio_134",
+		NULL, NULL, "etk_d11", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_HS, 11,
+		"cam_hs", "hw_dbg10", "mcbsp1_dx", "gpio_11",
+		NULL, NULL, "etk_d1", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_LCLK, 0,
+		"cam_lclk", NULL, "mcbsp_clks", NULL,
+		NULL, NULL, "etk_c1", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_VS, 12,
+		"cam_vs", "hw_dbg11", "mcbsp1_fsx", "gpio_12",
+		NULL, NULL, "etk_d0", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_XCLK, 0,
+		"cam_xclk", NULL, "sti_clk", NULL,
+		NULL, NULL, "etk_c2", NULL),
+	_OMAP2430_MUXENTRY(DSS_ACBIAS, 48,
+		"dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA0, 40,
+		"dss_data0", "uart1_cts", NULL, "gpio_40",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA10, 128,
+		"dss_data10", "sdi_data1n", NULL, "gpio_128",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA11, 129,
+		"dss_data11", "sdi_data1p", NULL, "gpio_129",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA12, 130,
+		"dss_data12", "sdi_data2n", NULL, "gpio_130",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA13, 131,
+		"dss_data13", "sdi_data2p", NULL, "gpio_131",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA14, 132,
+		"dss_data14", "sdi_data3n", NULL, "gpio_132",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA15, 133,
+		"dss_data15", "sdi_data3p", NULL, "gpio_133",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA16, 46,
+		"dss_data16", NULL, NULL, "gpio_46",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA17, 47,
+		"dss_data17", NULL, NULL, "gpio_47",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA1, 41,
+		"dss_data1", "uart1_rts", NULL, "gpio_41",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA2, 42,
+		"dss_data2", "uart1_tx", NULL, "gpio_42",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA3, 43,
+		"dss_data3", "uart1_rx", NULL, "gpio_43",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA4, 44,
+		"dss_data4", "uart3_rx_irrx", NULL, "gpio_44",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA5, 45,
+		"dss_data5", "uart3_tx_irtx", NULL, "gpio_45",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA6, 144,
+		"dss_data6", NULL, NULL, "gpio_144",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA7, 147,
+		"dss_data7", NULL, NULL, "gpio_147",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA8, 38,
+		"dss_data8", NULL, NULL, "gpio_38",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA9, 39,
+		"dss_data9", NULL, NULL, "gpio_39",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_HSYNC, 110,
+		"dss_hsync", NULL, NULL, "gpio_110",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_113, 113,
+		"gpio_113", "mcbsp2_clkx", NULL, "gpio_113",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_114, 114,
+		"gpio_114", "mcbsp2_fsx", NULL, "gpio_114",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_115, 115,
+		"gpio_115", "mcbsp2_dr", NULL, "gpio_115",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_116, 116,
+		"gpio_116", "mcbsp2_dx", NULL, "gpio_116",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_128, 128,
+		"gpio_128", NULL, "sti_din", "gpio_128",
+		NULL, "sys_boot0", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_129, 129,
+		"gpio_129", NULL, "sti_dout", "gpio_129",
+		NULL, "sys_boot1", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_130, 130,
+		"gpio_130", NULL, NULL, "gpio_130",
+		"jtag_emu2", "sys_boot2", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_131, 131,
+		"gpio_131", NULL, NULL, "gpio_131",
+		"jtag_emu3", "sys_boot3", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_132, 132,
+		"gpio_132", NULL, NULL, "gpio_132",
+		NULL, "sys_boot4", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_133, 133,
+		"gpio_133", NULL, NULL, "gpio_133",
+		NULL, "sys_boot5", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_134, 134,
+		"gpio_134", "ccp_datn", NULL, "gpio_134",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_135, 135,
+		"gpio_135", "ccp_datp", NULL, "gpio_135",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_136, 136,
+		"gpio_136", "ccp_clkn", NULL, "gpio_136",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_137, 137,
+		"gpio_137", "ccp_clkp", NULL, "gpio_137",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_138, 138,
+		"gpio_138", "spi3_clk", NULL, "gpio_138",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_139, 139,
+		"gpio_139", "spi3_cs0", "sys_ndmareq3", "gpio_139",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_140, 140,
+		"gpio_140", "spi3_simo", "sys_ndmareq4", "gpio_140",
+		NULL, NULL, "etk_d14", "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_141, 141,
+		"gpio_141", "spi3_somi", NULL, "gpio_141",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_142, 142,
+		"gpio_142", "spi3_cs1", "sys_ndmareq2", "gpio_142",
+		NULL, NULL, "etk_d15", "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_148, 148,
+		"gpio_148", "mcbsp5_fsx", NULL, "gpio_148",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_149, 149,
+		"gpio_149", "mcbsp5_dx", NULL, "gpio_149",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_150, 150,
+		"gpio_150", "mcbsp5_dr", NULL, "gpio_150",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_151, 151,
+		"gpio_151", "sys_pwrok", NULL, "gpio_151",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_152, 152,
+		"gpio_152", "uart1_cts", "sys_ndmareq1", "gpio_152",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_153, 153,
+		"gpio_153", "uart1_rx", "sys_ndmareq0", "gpio_153",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_154, 154,
+		"gpio_154", "mcbsp5_clkx", NULL, "gpio_154",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_63, 63,
+		"gpio_63", "mcbsp4_clkx", NULL, "gpio_63",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_78, 78,
+		"gpio_78", NULL, "uart2_rts", "gpio_78",
+		"uart3_rts_sd", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_79, 79,
+		"gpio_79", "secure_indicator", "uart2_tx", "gpio_79",
+		"uart3_tx_irtx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_7, 7,
+		"gpio_7", NULL, "uart2_cts", "gpio_7",
+		"uart3_cts_rctx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_80, 80,
+		"gpio_80", NULL, "uart2_rx", "gpio_80",
+		"uart3_rx_irrx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A10, 3,
+		"gpmc_a10", NULL, "sys_ndmareq0", "gpio_3",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A1, 31,
+		"gpmc_a1", NULL, NULL, "gpio_31",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A2, 30,
+		"gpmc_a2", NULL, NULL, "gpio_30",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A3, 29,
+		"gpmc_a3", NULL, NULL, "gpio_29",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A4, 49,
+		"gpmc_a4", NULL, NULL, "gpio_49",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A5, 53,
+		"gpmc_a5", NULL, NULL, "gpio_53",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A6, 52,
+		"gpmc_a6", NULL, NULL, "gpio_52",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A7, 6,
+		"gpmc_a7", NULL, NULL, "gpio_6",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A8, 5,
+		"gpmc_a8", NULL, NULL, "gpio_5",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A9, 4,
+		"gpmc_a9", NULL, "sys_ndmareq1", "gpio_4",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_CLK, 21,
+		"gpmc_clk", NULL, NULL, "gpio_21",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D10, 18,
+		"gpmc_d10", NULL, NULL, "gpio_18",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D11, 57,
+		"gpmc_d11", NULL, NULL, "gpio_57",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D12, 77,
+		"gpmc_d12", NULL, NULL, "gpio_77",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D13, 76,
+		"gpmc_d13", NULL, NULL, "gpio_76",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D14, 55,
+		"gpmc_d14", NULL, NULL, "gpio_55",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D15, 54,
+		"gpmc_d15", NULL, NULL, "gpio_54",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D8, 20,
+		"gpmc_d8", NULL, NULL, "gpio_20",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D9, 19,
+		"gpmc_d9", NULL, NULL, "gpio_19",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS1, 22,
+		"gpmc_ncs1", NULL, NULL, "gpio_22",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS2, 23,
+		"gpmc_ncs2", NULL, NULL, "gpio_23",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS3, 24,
+		"gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS4, 25,
+		"gpmc_ncs4", NULL, NULL, "gpio_25",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS5, 26,
+		"gpmc_ncs5", NULL, NULL, "gpio_26",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS6, 27,
+		"gpmc_ncs6", NULL, NULL, "gpio_27",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS7, 28,
+		"gpmc_ncs7", "gpmc_io_dir", NULL, "gpio_28",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_WAIT1, 33,
+		"gpmc_wait1", NULL, NULL, "gpio_33",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_WAIT2, 34,
+		"gpmc_wait2", NULL, NULL, "gpio_34",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_WAIT3, 35,
+		"gpmc_wait3", NULL, NULL, "gpio_35",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(HDQ_SIO, 101,
+		"hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
+		"uart3_rx_irrx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C1_SCL, 50,
+		"i2c1_scl", NULL, NULL, "gpio_50",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C1_SDA, 51,
+		"i2c1_sda", NULL, NULL, "gpio_51",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C2_SCL, 99,
+		"i2c2_scl", NULL, NULL, "gpio_99",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C2_SDA, 100,
+		"i2c2_sda", NULL, NULL, "gpio_100",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(JTAG_EMU0, 127,
+		"jtag_emu0", "secure_indicator", NULL, "gpio_127",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(JTAG_EMU1, 126,
+		"jtag_emu1", NULL, NULL, "gpio_126",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_CLKR, 92,
+		"mcbsp1_clkr", "ssi2_dat_tx", NULL, "gpio_92",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_CLKX, 98,
+		"mcbsp1_clkx", "ssi2_wake", NULL, "gpio_98",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_DR, 95,
+		"mcbsp1_dr", "ssi2_dat_rx", NULL, "gpio_95",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_DX, 94,
+		"mcbsp1_dx", "ssi2_rdy_tx", NULL, "gpio_94",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_FSR, 93,
+		"mcbsp1_fsr", "ssi2_flag_tx", NULL, "gpio_93",
+		"spi2_cs1", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_FSX, 97,
+		"mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP2_CLKX, 147,
+		"mcbsp2_clkx", "sdi_clkp", "dss_data23", "gpio_147",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP2_DR, 144,
+		"mcbsp2_dr", "sdi_clkn", "dss_data22", "gpio_144",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_CLKX, 71,
+		"mcbsp3_clkx", NULL, NULL, "gpio_71",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_DR, 73,
+		"mcbsp3_dr", NULL, NULL, "gpio_73",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_DX, 74,
+		"mcbsp3_dx", NULL, "sti_clk", "gpio_74",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_FSX, 72,
+		"mcbsp3_fsx", NULL, NULL, "gpio_72",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP_CLKS, 96,
+		"mcbsp_clks", "ssi2_flag_rx", NULL, "gpio_96",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_CLKO, 0,
+		"sdmmc1_clko", "ms_clko", NULL, NULL,
+		NULL, "hw_dbg9", "hw_dbg3", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_CMD, 0,
+		"sdmmc1_cmd", "ms_bs", NULL, NULL,
+		NULL, "hw_dbg8", "hw_dbg2", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT0, 0,
+		"sdmmc1_dat0", "ms_dat0", NULL, NULL,
+		NULL, "hw_dbg7", "hw_dbg1", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT1, 75,
+		"sdmmc1_dat1", "ms_dat1", NULL, "gpio_75",
+		NULL, "hw_dbg6", "hw_dbg0", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT2, 0,
+		"sdmmc1_dat2", "ms_dat2", NULL, NULL,
+		NULL, "hw_dbg5", "hw_dbg10", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT3, 0,
+		"sdmmc1_dat3", "ms_dat3", NULL, NULL,
+		NULL, "hw_dbg4", "hw_dbg11", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_CLKO, 13,
+		"sdmmc2_clko", NULL, NULL, "gpio_13",
+		NULL, "spi3_clk", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_CMD, 15,
+		"sdmmc2_cmd", "usb2_rcv", NULL, "gpio_15",
+		NULL, "spi3_simo", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT0, 16,
+		"sdmmc2_dat0", "usb2_tllse0", NULL, "gpio_16",
+		NULL, "spi3_somi", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT1, 58,
+		"sdmmc2_dat1", "usb2_txen", NULL, "gpio_58",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT2, 17,
+		"sdmmc2_dat2", "usb2_dat", NULL, "gpio_17",
+		NULL, "spi3_cs1", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT3, 14,
+		"sdmmc2_dat3", "usb2_se0", NULL, "gpio_14",
+		NULL, "spi3_cs0", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_A12, 2,
+		"sdrc_a12", NULL, NULL, "gpio_2",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_A13, 1,
+		"sdrc_a13", NULL, NULL, "gpio_1",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_A14, 0,
+		"sdrc_a14", NULL, NULL, "gpio_0",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_CKE1, 36,
+		"sdrc_cke1", NULL, NULL, "gpio_36",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_NCS1, 37,
+		"sdrc_ncs1", NULL, NULL, "gpio_37",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CLK, 81,
+		"spi1_clk", NULL, NULL, "gpio_81",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS0, 84,
+		"spi1_cs0", NULL, NULL, "gpio_84",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS1, 85,
+		"spi1_cs1", NULL, NULL, "gpio_85",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS2, 86,
+		"spi1_cs2", NULL, NULL, "gpio_86",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS3, 87,
+		"spi1_cs3", "spi2_cs1", NULL, "gpio_87",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_SIMO, 82,
+		"spi1_simo", NULL, NULL, "gpio_82",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_SOMI, 83,
+		"spi1_somi", NULL, NULL, "gpio_83",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_CLK, 88,
+		"spi2_clk", "gpt9_pwm_evt", NULL, "gpio_88",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_CS0, 91,
+		"spi2_cs0", "gpt12_pwm_evt", NULL, "gpio_91",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_SIMO, 89,
+		"spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_SOMI, 90,
+		"spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_DAT_RX, 62,
+		"ssi1_dat_rx", "uart1_rx", "usb1_dat", "gpio_62",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_DAT_TX, 59,
+		"ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_FLAG_RX, 64,
+		"ssi1_flag_rx", "mcbsp4_dr", NULL, "gpio_64",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_FLAG_TX, 60,
+		"ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_60",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_RDY_RX, 65,
+		"ssi1_rdy_rx", "mcbsp4_dx", NULL, "gpio_65",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_RDY_TX, 61,
+		"ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_WAKE, 66,
+		"ssi1_wake", "mcbsp4_fsx", NULL, "gpio_66",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_CLKOUT, 111,
+		"sys_clkout", NULL, NULL, "gpio_111",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_DRM_MSECURE, 118,
+		"sys_drm_msecure", NULL, "sys_ndmareq6", "gpio_118",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_NIRQ0, 56,
+		"sys_nirq0", NULL, NULL, "gpio_56",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_NIRQ1, 125,
+		"sys_nirq1", NULL, "sys_ndmareq5", "gpio_125",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_CTS, 32,
+		"uart1_cts", "sdi_vsync", "dss_data18", "gpio_32",
+		"mcbsp5_clkx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_RTS, 8,
+		"uart1_rts", "sdi_hsync", "dss_data19", "gpio_8",
+		"mcbsp5_fsx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_RX, 10,
+		"uart1_rx", "sdi_stp", "dss_data21", "gpio_10",
+		"mcbsp5_dr", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_TX, 9,
+		"uart1_tx", "sdi_den", "dss_data20", "gpio_9",
+		"mcbsp5_dx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_CTS, 67,
+		"uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_RTS, 68,
+		"uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_RX, 70,
+		"uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_TX, 69,
+		"uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_CTS_RCTX, 102,
+		"uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_RTS_SD, 103,
+		"uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_RX_IRRX, 105,
+		"uart3_rx_irrx", NULL, NULL, "gpio_105",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_TX_IRTX, 104,
+		"uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_CLK, 120,
+		"usb0hs_clk", NULL, NULL, "gpio_120",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA0, 0,
+		"usb0hs_data0", "uart3_tx_irtx", NULL, NULL,
+		"usb0_txen", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA1, 0,
+		"usb0hs_data1", "uart3_rx_irrx", NULL, NULL,
+		"usb0_dat", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA2, 0,
+		"usb0hs_data2", "uart3_rts_sd", NULL, NULL,
+		"usb0_se0", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA3, 106,
+		"usb0hs_data3", NULL, "uart3_cts_rctx", "gpio_106",
+		"usb0_puen", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA4, 107,
+		"usb0hs_data4", "mcbsp2_dr", NULL, "gpio_107",
+		"usb0_vp", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA5, 108,
+		"usb0hs_data5", "mcbsp2_dx", NULL, "gpio_108",
+		"usb0_vm", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA6, 109,
+		"usb0hs_data6", "mcbsp2_fsx", NULL, "gpio_109",
+		"usb0_rcv", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA7, 124,
+		"usb0hs_data7", "mcbsp2_clkx", NULL, "gpio_124",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DIR, 121,
+		"usb0hs_dir", NULL, NULL, "gpio_121",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_NXT, 123,
+		"usb0hs_nxt", NULL, NULL, "gpio_123",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_STP, 122,
+		"usb0hs_stp", NULL, NULL, "gpio_122",
+		NULL, NULL, NULL, "safe_mode"),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Balls for POP package
+ * 447-pin s-PBGA Package, 0.00mm Ball Pitch (Bottom)
+ */
+#ifdef CONFIG_DEBUG_FS
+static struct omap_ball __initdata omap2430_pop_ball[] = {
+	_OMAP2430_BALLENTRY(CAM_D0, "t8", NULL),
+	_OMAP2430_BALLENTRY(CAM_D1, "t4", NULL),
+	_OMAP2430_BALLENTRY(CAM_D10, "r4", NULL),
+	_OMAP2430_BALLENTRY(CAM_D11, "w3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D2, "r2", NULL),
+	_OMAP2430_BALLENTRY(CAM_D3, "u3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D4, "u2", NULL),
+	_OMAP2430_BALLENTRY(CAM_D5, "v1", NULL),
+	_OMAP2430_BALLENTRY(CAM_D6, "t3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D7, "r3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D8, "u7", NULL),
+	_OMAP2430_BALLENTRY(CAM_D9, "t7", NULL),
+	_OMAP2430_BALLENTRY(CAM_HS, "p2", NULL),
+	_OMAP2430_BALLENTRY(CAM_LCLK, "r7", NULL),
+	_OMAP2430_BALLENTRY(CAM_VS, "n2", NULL),
+	_OMAP2430_BALLENTRY(CAM_XCLK, "p3", NULL),
+	_OMAP2430_BALLENTRY(DSS_ACBIAS, "y3", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA0, "v8", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA1, "w1", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA10, "k25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA11, "j25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA12, "k24", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA13, "j24", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA14, "h25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA15, "g25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA16, "ac3", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA17, "y7", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA2, "u8", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA3, "u4", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA4, "v3", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA5, "aa4", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA6, "w8", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA7, "y1", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA8, "aa2", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA9, "ab4", NULL),
+	_OMAP2430_BALLENTRY(DSS_HSYNC, "v2", NULL),
+	_OMAP2430_BALLENTRY(GPIO_113, "ad16", NULL),
+	_OMAP2430_BALLENTRY(GPIO_114, "ac10", NULL),
+	_OMAP2430_BALLENTRY(GPIO_115, "ad13", NULL),
+	_OMAP2430_BALLENTRY(GPIO_116, "ae15", NULL),
+	_OMAP2430_BALLENTRY(GPIO_128, "p1", NULL),
+	_OMAP2430_BALLENTRY(GPIO_129, "r1", NULL),
+	_OMAP2430_BALLENTRY(GPIO_130, "p7", NULL),
+	_OMAP2430_BALLENTRY(GPIO_131, "l8", NULL),
+	_OMAP2430_BALLENTRY(GPIO_132, "w24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_133, "aa24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_134, "ae12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_135, "ae11", NULL),
+	_OMAP2430_BALLENTRY(GPIO_136, "ad12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_137, "ad11", NULL),
+	_OMAP2430_BALLENTRY(GPIO_138, "y12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_139, "ad17", NULL),
+	_OMAP2430_BALLENTRY(GPIO_140, "l7", NULL),
+	_OMAP2430_BALLENTRY(GPIO_141, "ac24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_142, "m3", NULL),
+	_OMAP2430_BALLENTRY(GPIO_148, "af12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_149, "k7", NULL),
+	_OMAP2430_BALLENTRY(GPIO_150, "m1", NULL),
+	_OMAP2430_BALLENTRY(GPIO_151, "ad14", NULL),
+	_OMAP2430_BALLENTRY(GPIO_152, "ad18", NULL),
+	_OMAP2430_BALLENTRY(GPIO_153, "u24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_154, "ae16", NULL),
+	_OMAP2430_BALLENTRY(GPIO_63, "n3", NULL),
+	_OMAP2430_BALLENTRY(GPIO_7, "ac23", NULL),
+	_OMAP2430_BALLENTRY(GPIO_78, "ad10", NULL),
+	_OMAP2430_BALLENTRY(GPIO_79, "ae10", NULL),
+	_OMAP2430_BALLENTRY(GPIO_80, "ae13", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A1, "a9", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A10, "g12", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A2, "b8", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A3, "g10", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A4, "g11", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A5, "a10", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A6, "g13", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A7, "a6", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A8, "h1", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A9, "c8", NULL),
+	_OMAP2430_BALLENTRY(GPMC_CLK, "n1", "l1"),
+	_OMAP2430_BALLENTRY(GPMC_D10, "d1", "n1"),
+	_OMAP2430_BALLENTRY(GPMC_D11, "d2", "p2"),
+	_OMAP2430_BALLENTRY(GPMC_D12, "e1", "p1"),
+	_OMAP2430_BALLENTRY(GPMC_D13, "e3", "m1"),
+	_OMAP2430_BALLENTRY(GPMC_D14, "c7", "j2"),
+	_OMAP2430_BALLENTRY(GPMC_D15, "f3", "k2"),
+	_OMAP2430_BALLENTRY(GPMC_D8, "e2", "r1"),
+	_OMAP2430_BALLENTRY(GPMC_D9, "ab1", "t1"),
+	_OMAP2430_BALLENTRY(GPMC_NCS1, "ac1", "w1"),
+	_OMAP2430_BALLENTRY(GPMC_NCS2, "c6", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS3, "b9", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS4, "b4", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS5, "a4", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS6, "f1", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS7, "a7", NULL),
+	_OMAP2430_BALLENTRY(GPMC_WAIT1, "j1", "y8"),
+	_OMAP2430_BALLENTRY(GPMC_WAIT2, "b7", NULL),
+	_OMAP2430_BALLENTRY(GPMC_WAIT3, "g14", NULL),
+	_OMAP2430_BALLENTRY(HDQ_SIO, "h20", NULL),
+	_OMAP2430_BALLENTRY(I2C1_SCL, "y17", NULL),
+	_OMAP2430_BALLENTRY(I2C1_SDA, "ac19", NULL),
+	_OMAP2430_BALLENTRY(I2C2_SCL, "n7", NULL),
+	_OMAP2430_BALLENTRY(I2C2_SDA, "m4", NULL),
+	_OMAP2430_BALLENTRY(JTAG_EMU0, "e25", NULL),
+	_OMAP2430_BALLENTRY(JTAG_EMU1, "e24", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_CLKR, "ab2", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_CLKX, "y9", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_DR, "af3", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_DX, "aa1", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_FSR, "ad5", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_FSX, "ab3", NULL),
+	_OMAP2430_BALLENTRY(MCBSP2_CLKX, "j26", NULL),
+	_OMAP2430_BALLENTRY(MCBSP2_DR, "k26", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_CLKX, "ac9", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_DR, "ae2", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_DX, "af4", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_FSX, "ae4", NULL),
+	_OMAP2430_BALLENTRY(MCBSP_CLKS, "ad6", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_CLKO, "n23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_CMD, "l23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT0, "m24", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT1, "p23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT2, "t20", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT3, "r20", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_CLKO, "v26", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_CMD, "w20", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT0, "v23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT1, "y24", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT2, "v25", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT3, "v24", NULL),
+	_OMAP2430_BALLENTRY(SDRC_A12, "w26", "r21"),
+	_OMAP2430_BALLENTRY(SDRC_A13, "af20", "aa15"),
+	_OMAP2430_BALLENTRY(SDRC_A14, "af16", "y12"),
+	_OMAP2430_BALLENTRY(SDRC_CKE1, "af15", "y13"),
+	_OMAP2430_BALLENTRY(SDRC_NCS1, "aa25", "t20"),
+	_OMAP2430_BALLENTRY(SPI1_CLK, "y18", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS0, "u1", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS1, "af19", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS2, "ae19", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS3, "h24", NULL),
+	_OMAP2430_BALLENTRY(SPI1_SIMO, "ad15", NULL),
+	_OMAP2430_BALLENTRY(SPI1_SOMI, "ae17", NULL),
+	_OMAP2430_BALLENTRY(SPI2_CLK, "y20", NULL),
+	_OMAP2430_BALLENTRY(SPI2_CS0, "y19", NULL),
+	_OMAP2430_BALLENTRY(SPI2_SIMO, "ac20", NULL),
+	_OMAP2430_BALLENTRY(SPI2_SOMI, "ad19", NULL),
+	_OMAP2430_BALLENTRY(SSI1_DAT_RX, "aa26", NULL),
+	_OMAP2430_BALLENTRY(SSI1_DAT_TX, "ad24", NULL),
+	_OMAP2430_BALLENTRY(SSI1_FLAG_RX, "ad23", NULL),
+	_OMAP2430_BALLENTRY(SSI1_FLAG_TX, "ab24", NULL),
+	_OMAP2430_BALLENTRY(SSI1_RDY_RX, "ab25", NULL),
+	_OMAP2430_BALLENTRY(SSI1_RDY_TX, "y25", NULL),
+	_OMAP2430_BALLENTRY(SSI1_WAKE, "ac25", NULL),
+	_OMAP2430_BALLENTRY(SYS_CLKOUT, "r25", NULL),
+	_OMAP2430_BALLENTRY(SYS_DRM_MSECURE, "ae3", NULL),
+	_OMAP2430_BALLENTRY(SYS_NIRQ0, "w25", NULL),
+	_OMAP2430_BALLENTRY(SYS_NIRQ1, "ad21", NULL),
+	_OMAP2430_BALLENTRY(UART1_CTS, "p24", NULL),
+	_OMAP2430_BALLENTRY(UART1_RTS, "p25", NULL),
+	_OMAP2430_BALLENTRY(UART1_RX, "n24", NULL),
+	_OMAP2430_BALLENTRY(UART1_TX, "r24", NULL),
+	_OMAP2430_BALLENTRY(UART2_CTS, "u25", NULL),
+	_OMAP2430_BALLENTRY(UART2_RTS, "t23", NULL),
+	_OMAP2430_BALLENTRY(UART2_RX, "t24", NULL),
+	_OMAP2430_BALLENTRY(UART2_TX, "u20", NULL),
+	_OMAP2430_BALLENTRY(UART3_CTS_RCTX, "m2", NULL),
+	_OMAP2430_BALLENTRY(UART3_RTS_SD, "k2", NULL),
+	_OMAP2430_BALLENTRY(UART3_RX_IRRX, "l3", NULL),
+	_OMAP2430_BALLENTRY(UART3_TX_IRTX, "l2", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_CLK, "ae8", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA0, "ad4", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA1, "ae6", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA2, "af9", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA3, "ad9", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA4, "y11", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA5, "ad7", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA6, "ae7", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA7, "ac7", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DIR, "ad8", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_NXT, "ae9", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_STP, "ae5", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap2430_pop_ball	 NULL
+#endif
+
+int __init omap2430_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+	struct omap_ball *package_balls = NULL;
+
+	switch (flags & OMAP_PACKAGE_MASK) {
+	case OMAP_PACKAGE_ZAC:
+		package_balls = omap2430_pop_ball;
+		break;
+	default:
+		pr_warning("mux: No ball data available for omap2420 package\n");
+	}
+
+	return omap_mux_init(OMAP2430_CONTROL_PADCONF_MUX_PBASE,
+			     OMAP2430_CONTROL_PADCONF_MUX_SIZE,
+				omap2430_muxmodes, NULL, board_subset,
+				package_balls);
+}
diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h
new file mode 100644
index 000000000000..adbea0d03e08
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2430.h
@@ -0,0 +1,370 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP2430_CONTROL_PADCONF_MUX_PBASE			0x49002030LU
+
+#define OMAP2430_MUX(mode0, mux_value)					\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##mode0##_OFFSET),	\
+	.value		= (mux_value),					\
+}
+
+/*
+ * OMAP2430 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM.  Add 0x49002030 to these values to get the
+ * absolute addresses.  The name in the macro is the mode-0 name of
+ * the pin.  NOTE: These registers are 8-bits wide.
+ *
+ * Note that these defines use SDMMC instead of MMC for compability
+ * with signal names used in 3630.
+ */
+#define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET		0x000
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS0_OFFSET		0x001
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS1_OFFSET		0x002
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS2_OFFSET		0x003
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS3_OFFSET		0x004
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS4_OFFSET		0x005
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS5_OFFSET		0x006
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS6_OFFSET		0x007
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS7_OFFSET		0x008
+#define OMAP2430_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET		0x009
+#define OMAP2430_CONTROL_PADCONF_GPMC_NOE_NRE_OFFSET		0x00a
+#define OMAP2430_CONTROL_PADCONF_GPMC_NWE_OFFSET		0x00b
+#define OMAP2430_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET		0x00c
+#define OMAP2430_CONTROL_PADCONF_GPMC_NBE1_OFFSET		0x00d
+#define OMAP2430_CONTROL_PADCONF_GPMC_NWP_OFFSET		0x00e
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT0_OFFSET		0x00f
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT1_OFFSET		0x010
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT2_OFFSET		0x011
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT3_OFFSET		0x012
+#define OMAP2430_CONTROL_PADCONF_SDRC_CLK_OFFSET		0x013
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCLK_OFFSET		0x014
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCS0_OFFSET		0x015
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCS1_OFFSET		0x016
+#define OMAP2430_CONTROL_PADCONF_SDRC_CKE0_OFFSET		0x017
+#define OMAP2430_CONTROL_PADCONF_SDRC_CKE1_OFFSET		0x018
+#define OMAP2430_CONTROL_PADCONF_SDRC_NRAS_OFFSET		0x019
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCAS_OFFSET		0x01a
+#define OMAP2430_CONTROL_PADCONF_SDRC_NWE_OFFSET		0x01b
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM0_OFFSET		0x01c
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM1_OFFSET		0x01d
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM2_OFFSET		0x01e
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM3_OFFSET		0x01f
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS0_OFFSET		0x020
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS1_OFFSET		0x021
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS2_OFFSET		0x022
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS3_OFFSET		0x023
+#define OMAP2430_CONTROL_PADCONF_SDRC_A14_OFFSET		0x024
+#define OMAP2430_CONTROL_PADCONF_SDRC_A13_OFFSET		0x025
+#define OMAP2430_CONTROL_PADCONF_SDRC_A12_OFFSET		0x026
+#define OMAP2430_CONTROL_PADCONF_SDRC_BA1_OFFSET		0x027
+#define OMAP2430_CONTROL_PADCONF_SDRC_BA0_OFFSET		0x028
+#define OMAP2430_CONTROL_PADCONF_SDRC_A11_OFFSET		0x029
+#define OMAP2430_CONTROL_PADCONF_SDRC_A10_OFFSET		0x02a
+#define OMAP2430_CONTROL_PADCONF_SDRC_A9_OFFSET			0x02b
+#define OMAP2430_CONTROL_PADCONF_SDRC_A8_OFFSET			0x02c
+#define OMAP2430_CONTROL_PADCONF_SDRC_A7_OFFSET			0x02d
+#define OMAP2430_CONTROL_PADCONF_SDRC_A6_OFFSET			0x02e
+#define OMAP2430_CONTROL_PADCONF_SDRC_A5_OFFSET			0x02f
+#define OMAP2430_CONTROL_PADCONF_SDRC_A4_OFFSET			0x030
+#define OMAP2430_CONTROL_PADCONF_SDRC_A3_OFFSET			0x031
+#define OMAP2430_CONTROL_PADCONF_SDRC_A2_OFFSET			0x032
+#define OMAP2430_CONTROL_PADCONF_SDRC_A1_OFFSET			0x033
+#define OMAP2430_CONTROL_PADCONF_SDRC_A0_OFFSET			0x034
+#define OMAP2430_CONTROL_PADCONF_SDRC_D31_OFFSET		0x035
+#define OMAP2430_CONTROL_PADCONF_SDRC_D30_OFFSET		0x036
+#define OMAP2430_CONTROL_PADCONF_SDRC_D29_OFFSET		0x037
+#define OMAP2430_CONTROL_PADCONF_SDRC_D28_OFFSET		0x038
+#define OMAP2430_CONTROL_PADCONF_SDRC_D27_OFFSET		0x039
+#define OMAP2430_CONTROL_PADCONF_SDRC_D26_OFFSET		0x03a
+#define OMAP2430_CONTROL_PADCONF_SDRC_D25_OFFSET		0x03b
+#define OMAP2430_CONTROL_PADCONF_SDRC_D24_OFFSET		0x03c
+#define OMAP2430_CONTROL_PADCONF_SDRC_D23_OFFSET		0x03d
+#define OMAP2430_CONTROL_PADCONF_SDRC_D22_OFFSET		0x03e
+#define OMAP2430_CONTROL_PADCONF_SDRC_D21_OFFSET		0x03f
+#define OMAP2430_CONTROL_PADCONF_SDRC_D20_OFFSET		0x040
+#define OMAP2430_CONTROL_PADCONF_SDRC_D19_OFFSET		0x041
+#define OMAP2430_CONTROL_PADCONF_SDRC_D18_OFFSET		0x042
+#define OMAP2430_CONTROL_PADCONF_SDRC_D17_OFFSET		0x043
+#define OMAP2430_CONTROL_PADCONF_SDRC_D16_OFFSET		0x044
+#define OMAP2430_CONTROL_PADCONF_SDRC_D15_OFFSET		0x045
+#define OMAP2430_CONTROL_PADCONF_SDRC_D14_OFFSET		0x046
+#define OMAP2430_CONTROL_PADCONF_SDRC_D13_OFFSET		0x047
+#define OMAP2430_CONTROL_PADCONF_SDRC_D12_OFFSET		0x048
+#define OMAP2430_CONTROL_PADCONF_SDRC_D11_OFFSET		0x049
+#define OMAP2430_CONTROL_PADCONF_SDRC_D10_OFFSET		0x04a
+#define OMAP2430_CONTROL_PADCONF_SDRC_D9_OFFSET			0x04b
+#define OMAP2430_CONTROL_PADCONF_SDRC_D8_OFFSET			0x04c
+#define OMAP2430_CONTROL_PADCONF_SDRC_D7_OFFSET			0x04d
+#define OMAP2430_CONTROL_PADCONF_SDRC_D6_OFFSET			0x04e
+#define OMAP2430_CONTROL_PADCONF_SDRC_D5_OFFSET			0x04f
+#define OMAP2430_CONTROL_PADCONF_SDRC_D4_OFFSET			0x050
+#define OMAP2430_CONTROL_PADCONF_SDRC_D3_OFFSET			0x051
+#define OMAP2430_CONTROL_PADCONF_SDRC_D2_OFFSET			0x052
+#define OMAP2430_CONTROL_PADCONF_SDRC_D1_OFFSET			0x053
+#define OMAP2430_CONTROL_PADCONF_SDRC_D0_OFFSET			0x054
+#define OMAP2430_CONTROL_PADCONF_GPMC_A10_OFFSET		0x055
+#define OMAP2430_CONTROL_PADCONF_GPMC_A9_OFFSET			0x056
+#define OMAP2430_CONTROL_PADCONF_GPMC_A8_OFFSET			0x057
+#define OMAP2430_CONTROL_PADCONF_GPMC_A7_OFFSET			0x058
+#define OMAP2430_CONTROL_PADCONF_GPMC_A6_OFFSET			0x059
+#define OMAP2430_CONTROL_PADCONF_GPMC_A5_OFFSET			0x05a
+#define OMAP2430_CONTROL_PADCONF_GPMC_A4_OFFSET			0x05b
+#define OMAP2430_CONTROL_PADCONF_GPMC_A3_OFFSET			0x05c
+#define OMAP2430_CONTROL_PADCONF_GPMC_A2_OFFSET			0x05d
+#define OMAP2430_CONTROL_PADCONF_GPMC_A1_OFFSET			0x05e
+#define OMAP2430_CONTROL_PADCONF_GPMC_D15_OFFSET		0x05f
+#define OMAP2430_CONTROL_PADCONF_GPMC_D14_OFFSET		0x060
+#define OMAP2430_CONTROL_PADCONF_GPMC_D13_OFFSET		0x061
+#define OMAP2430_CONTROL_PADCONF_GPMC_D12_OFFSET		0x062
+#define OMAP2430_CONTROL_PADCONF_GPMC_D11_OFFSET		0x063
+#define OMAP2430_CONTROL_PADCONF_GPMC_D10_OFFSET		0x064
+#define OMAP2430_CONTROL_PADCONF_GPMC_D9_OFFSET			0x065
+#define OMAP2430_CONTROL_PADCONF_GPMC_D8_OFFSET			0x066
+#define OMAP2430_CONTROL_PADCONF_GPMC_D7_OFFSET			0x067
+#define OMAP2430_CONTROL_PADCONF_GPMC_D6_OFFSET			0x068
+#define OMAP2430_CONTROL_PADCONF_GPMC_D5_OFFSET			0x069
+#define OMAP2430_CONTROL_PADCONF_GPMC_D4_OFFSET			0x06a
+#define OMAP2430_CONTROL_PADCONF_GPMC_D3_OFFSET			0x06b
+#define OMAP2430_CONTROL_PADCONF_GPMC_D2_OFFSET			0x06c
+#define OMAP2430_CONTROL_PADCONF_GPMC_D1_OFFSET			0x06d
+#define OMAP2430_CONTROL_PADCONF_GPMC_D0_OFFSET			0x06e
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA0_OFFSET		0x06f
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA1_OFFSET		0x070
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA2_OFFSET		0x071
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA3_OFFSET		0x072
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA4_OFFSET		0x073
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA5_OFFSET		0x074
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA6_OFFSET		0x075
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA7_OFFSET		0x076
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA8_OFFSET		0x077
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA9_OFFSET		0x078
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA10_OFFSET		0x079
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA11_OFFSET		0x07a
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA12_OFFSET		0x07b
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA13_OFFSET		0x07c
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA14_OFFSET		0x07d
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA15_OFFSET		0x07e
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA16_OFFSET		0x07f
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA17_OFFSET		0x080
+#define OMAP2430_CONTROL_PADCONF_UART1_CTS_OFFSET		0x081
+#define OMAP2430_CONTROL_PADCONF_UART1_RTS_OFFSET		0x082
+#define OMAP2430_CONTROL_PADCONF_UART1_TX_OFFSET		0x083
+#define OMAP2430_CONTROL_PADCONF_UART1_RX_OFFSET		0x084
+#define OMAP2430_CONTROL_PADCONF_MCBSP2_DR_OFFSET		0x085
+#define OMAP2430_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET		0x086
+#define OMAP2430_CONTROL_PADCONF_DSS_PCLK_OFFSET		0x087
+#define OMAP2430_CONTROL_PADCONF_DSS_VSYNC_OFFSET		0x088
+#define OMAP2430_CONTROL_PADCONF_DSS_HSYNC_OFFSET		0x089
+#define OMAP2430_CONTROL_PADCONF_DSS_ACBIAS_OFFSET		0x08a
+#define OMAP2430_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET		0x08b
+#define OMAP2430_CONTROL_PADCONF_SYS_NRESWARM_OFFSET		0x08c
+#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ0_OFFSET		0x08d
+#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ1_OFFSET		0x08e
+#define OMAP2430_CONTROL_PADCONF_SYS_VMODE_OFFSET		0x08f
+#define OMAP2430_CONTROL_PADCONF_GPIO_128_OFFSET		0x090
+#define OMAP2430_CONTROL_PADCONF_GPIO_129_OFFSET		0x091
+#define OMAP2430_CONTROL_PADCONF_GPIO_130_OFFSET		0x092
+#define OMAP2430_CONTROL_PADCONF_GPIO_131_OFFSET		0x093
+#define OMAP2430_CONTROL_PADCONF_SYS_32K_OFFSET			0x094
+#define OMAP2430_CONTROL_PADCONF_SYS_XTALIN_OFFSET		0x095
+#define OMAP2430_CONTROL_PADCONF_SYS_XTALOUT_OFFSET		0x096
+#define OMAP2430_CONTROL_PADCONF_GPIO_132_OFFSET		0x097
+#define OMAP2430_CONTROL_PADCONF_SYS_CLKREQ_OFFSET		0x098
+#define OMAP2430_CONTROL_PADCONF_SYS_CLKOUT_OFFSET		0x099
+#define OMAP2430_CONTROL_PADCONF_GPIO_151_OFFSET		0x09a
+#define OMAP2430_CONTROL_PADCONF_GPIO_133_OFFSET		0x09b
+#define OMAP2430_CONTROL_PADCONF_JTAG_EMU1_OFFSET		0x09c
+#define OMAP2430_CONTROL_PADCONF_JTAG_EMU0_OFFSET		0x09d
+#define OMAP2430_CONTROL_PADCONF_JTAG_NTRST_OFFSET		0x09e
+#define OMAP2430_CONTROL_PADCONF_JTAG_TCK_OFFSET		0x09f
+#define OMAP2430_CONTROL_PADCONF_JTAG_RTCK_OFFSET		0x0a0
+#define OMAP2430_CONTROL_PADCONF_JTAG_TMS_OFFSET		0x0a1
+#define OMAP2430_CONTROL_PADCONF_JTAG_TDI_OFFSET		0x0a2
+#define OMAP2430_CONTROL_PADCONF_JTAG_TDO_OFFSET		0x0a3
+#define OMAP2430_CONTROL_PADCONF_CAM_D9_OFFSET			0x0a4
+#define OMAP2430_CONTROL_PADCONF_CAM_D8_OFFSET			0x0a5
+#define OMAP2430_CONTROL_PADCONF_CAM_D7_OFFSET			0x0a6
+#define OMAP2430_CONTROL_PADCONF_CAM_D6_OFFSET			0x0a7
+#define OMAP2430_CONTROL_PADCONF_CAM_D5_OFFSET			0x0a8
+#define OMAP2430_CONTROL_PADCONF_CAM_D4_OFFSET			0x0a9
+#define OMAP2430_CONTROL_PADCONF_CAM_D3_OFFSET			0x0aa
+#define OMAP2430_CONTROL_PADCONF_CAM_D2_OFFSET			0x0ab
+#define OMAP2430_CONTROL_PADCONF_CAM_D1_OFFSET			0x0ac
+#define OMAP2430_CONTROL_PADCONF_CAM_D0_OFFSET			0x0ad
+#define OMAP2430_CONTROL_PADCONF_CAM_HS_OFFSET			0x0ae
+#define OMAP2430_CONTROL_PADCONF_CAM_VS_OFFSET			0x0af
+#define OMAP2430_CONTROL_PADCONF_CAM_LCLK_OFFSET		0x0b0
+#define OMAP2430_CONTROL_PADCONF_CAM_XCLK_OFFSET		0x0b1
+#define OMAP2430_CONTROL_PADCONF_CAM_D11_OFFSET			0x0b2
+#define OMAP2430_CONTROL_PADCONF_CAM_D10_OFFSET			0x0b3
+#define OMAP2430_CONTROL_PADCONF_GPIO_134_OFFSET		0x0b4
+#define OMAP2430_CONTROL_PADCONF_GPIO_135_OFFSET		0x0b5
+#define OMAP2430_CONTROL_PADCONF_GPIO_136_OFFSET		0x0b6
+#define OMAP2430_CONTROL_PADCONF_GPIO_137_OFFSET		0x0b7
+#define OMAP2430_CONTROL_PADCONF_GPIO_138_OFFSET		0x0b8
+#define OMAP2430_CONTROL_PADCONF_GPIO_139_OFFSET		0x0b9
+#define OMAP2430_CONTROL_PADCONF_GPIO_140_OFFSET		0x0ba
+#define OMAP2430_CONTROL_PADCONF_GPIO_141_OFFSET		0x0bb
+#define OMAP2430_CONTROL_PADCONF_GPIO_142_OFFSET		0x0bc
+#define OMAP2430_CONTROL_PADCONF_GPIO_154_OFFSET		0x0bd
+#define OMAP2430_CONTROL_PADCONF_GPIO_148_OFFSET		0x0be
+#define OMAP2430_CONTROL_PADCONF_GPIO_149_OFFSET		0x0bf
+#define OMAP2430_CONTROL_PADCONF_GPIO_150_OFFSET		0x0c0
+#define OMAP2430_CONTROL_PADCONF_GPIO_152_OFFSET		0x0c1
+#define OMAP2430_CONTROL_PADCONF_GPIO_153_OFFSET		0x0c2
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_CLKO_OFFSET		0x0c3
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_CMD_OFFSET		0x0c4
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET		0x0c5
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET		0x0c6
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET		0x0c7
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET		0x0c8
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_CLKO_OFFSET		0x0c9
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET		0x0ca
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_CMD_OFFSET		0x0cb
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET		0x0cc
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET		0x0cd
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET		0x0ce
+#define OMAP2430_CONTROL_PADCONF_UART2_CTS_OFFSET		0x0cf
+#define OMAP2430_CONTROL_PADCONF_UART2_RTS_OFFSET		0x0d0
+#define OMAP2430_CONTROL_PADCONF_UART2_TX_OFFSET		0x0d1
+#define OMAP2430_CONTROL_PADCONF_UART2_RX_OFFSET		0x0d2
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET		0x0d3
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_FSX_OFFSET		0x0d4
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_DR_OFFSET		0x0d5
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_DX_OFFSET		0x0d6
+#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET		0x0d7
+#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET		0x0d8
+#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET		0x0d9
+#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET		0x0da
+#define OMAP2430_CONTROL_PADCONF_GPIO_63_OFFSET			0x0db
+#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET		0x0dc
+#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET		0x0dd
+#define OMAP2430_CONTROL_PADCONF_SSI1_WAKE_OFFSET		0x0de
+#define OMAP2430_CONTROL_PADCONF_SPI1_CLK_OFFSET		0x0df
+#define OMAP2430_CONTROL_PADCONF_SPI1_SIMO_OFFSET		0x0e0
+#define OMAP2430_CONTROL_PADCONF_SPI1_SOMI_OFFSET		0x0e1
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS0_OFFSET		0x0e2
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS1_OFFSET		0x0e3
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS2_OFFSET		0x0e4
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS3_OFFSET		0x0e5
+#define OMAP2430_CONTROL_PADCONF_SPI2_CLK_OFFSET		0x0e6
+#define OMAP2430_CONTROL_PADCONF_SPI2_SIMO_OFFSET		0x0e7
+#define OMAP2430_CONTROL_PADCONF_SPI2_SOMI_OFFSET		0x0e8
+#define OMAP2430_CONTROL_PADCONF_SPI2_CS0_OFFSET		0x0e9
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET		0x0ea
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSR_OFFSET		0x0eb
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_DX_OFFSET		0x0ec
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_DR_OFFSET		0x0ed
+#define OMAP2430_CONTROL_PADCONF_MCBSP_CLKS_OFFSET		0x0ee
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSX_OFFSET		0x0ef
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET		0x0f0
+#define OMAP2430_CONTROL_PADCONF_I2C1_SCL_OFFSET		0x0f1
+#define OMAP2430_CONTROL_PADCONF_I2C1_SDA_OFFSET		0x0f2
+#define OMAP2430_CONTROL_PADCONF_I2C2_SCL_OFFSET		0x0f3
+#define OMAP2430_CONTROL_PADCONF_I2C2_SDA_OFFSET		0x0f4
+#define OMAP2430_CONTROL_PADCONF_HDQ_SIO_OFFSET			0x0f5
+#define OMAP2430_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET		0x0f6
+#define OMAP2430_CONTROL_PADCONF_UART3_RTS_SD_OFFSET		0x0f7
+#define OMAP2430_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET		0x0f8
+#define OMAP2430_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET		0x0f9
+#define OMAP2430_CONTROL_PADCONF_GPIO_7_OFFSET			0x0fa
+#define OMAP2430_CONTROL_PADCONF_GPIO_78_OFFSET			0x0fb
+#define OMAP2430_CONTROL_PADCONF_GPIO_79_OFFSET			0x0fc
+#define OMAP2430_CONTROL_PADCONF_GPIO_80_OFFSET			0x0fd
+#define OMAP2430_CONTROL_PADCONF_GPIO_113_OFFSET		0x0fe
+#define OMAP2430_CONTROL_PADCONF_GPIO_114_OFFSET		0x0ff
+#define OMAP2430_CONTROL_PADCONF_GPIO_115_OFFSET		0x100
+#define OMAP2430_CONTROL_PADCONF_GPIO_116_OFFSET		0x101
+#define OMAP2430_CONTROL_PADCONF_SYS_DRM_MSECURE_OFFSET		0x102
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA3_OFFSET		0x103
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA4_OFFSET		0x104
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA5_OFFSET		0x105
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA6_OFFSET		0x106
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA2_OFFSET		0x107
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA0_OFFSET		0x108
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA1_OFFSET		0x109
+#define OMAP2430_CONTROL_PADCONF_USB0HS_CLK_OFFSET		0x10a
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DIR_OFFSET		0x10b
+#define OMAP2430_CONTROL_PADCONF_USB0HS_STP_OFFSET		0x10c
+#define OMAP2430_CONTROL_PADCONF_USB0HS_NXT_OFFSET		0x10d
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA7_OFFSET		0x10e
+#define OMAP2430_CONTROL_PADCONF_TV_OUT_OFFSET			0x10f
+#define OMAP2430_CONTROL_PADCONF_TV_VREF_OFFSET			0x110
+#define OMAP2430_CONTROL_PADCONF_TV_RSET_OFFSET			0x111
+#define OMAP2430_CONTROL_PADCONF_TV_VFB_OFFSET			0x112
+#define OMAP2430_CONTROL_PADCONF_TV_DACOUT_OFFSET		0x113
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD0_OFFSET		0x114
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD1_OFFSET		0x115
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD2_OFFSET		0x116
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD3_OFFSET		0x117
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD4_OFFSET		0x118
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD5_OFFSET		0x119
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD6_OFFSET		0x11a
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD7_OFFSET		0x11b
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD8_OFFSET		0x11c
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD9_OFFSET		0x11d
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD10_OFFSET		0x11e
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD11_OFFSET		0x11f
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD12_OFFSET		0x120
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD13_OFFSET		0x121
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD14_OFFSET		0x122
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD15_OFFSET		0x123
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD16_OFFSET		0x124
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD17_OFFSET		0x125
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD18_OFFSET		0x126
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD19_OFFSET		0x127
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD20_OFFSET		0x128
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD21_OFFSET		0x129
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD22_OFFSET		0x12a
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD23_OFFSET		0x12b
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD24_OFFSET		0x12c
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD25_OFFSET		0x12d
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD26_OFFSET		0x12e
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD27_OFFSET		0x12f
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD28_OFFSET		0x130
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD29_OFFSET		0x131
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD30_OFFSET		0x132
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD31_OFFSET		0x133
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD32_OFFSET		0x134
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD33_OFFSET		0x135
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD34_OFFSET		0x136
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD35_OFFSET		0x137
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD36_OFFSET		0x138
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD37_OFFSET		0x139
+#define OMAP2430_CONTROL_PADCONF_AD2DMWRITE_OFFSET		0x13a
+#define OMAP2430_CONTROL_PADCONF_D2DCLK26MI_OFFSET		0x13b
+#define OMAP2430_CONTROL_PADCONF_D2DNRESPWRON1_OFFSET		0x13c
+#define OMAP2430_CONTROL_PADCONF_D2DNRESWARM_OFFSET		0x13d
+#define OMAP2430_CONTROL_PADCONF_D2DARM9NIRQ_OFFSET		0x13e
+#define OMAP2430_CONTROL_PADCONF_D2DUMA2P6FIQ_OFFSET		0x13f
+#define OMAP2430_CONTROL_PADCONF_D2DSPINT_OFFSET		0x140
+#define OMAP2430_CONTROL_PADCONF_D2DFRINT_OFFSET		0x141
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ0_OFFSET		0x142
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ1_OFFSET		0x143
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ2_OFFSET		0x144
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ3_OFFSET		0x145
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTRST_OFFSET		0x146
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTDI_OFFSET		0x147
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTDO_OFFSET		0x148
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTMS_OFFSET		0x149
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTCK_OFFSET		0x14a
+#define OMAP2430_CONTROL_PADCONF_D2DN3GRTCK_OFFSET		0x14b
+#define OMAP2430_CONTROL_PADCONF_D2DMSTDBY_OFFSET		0x14c
+#define OMAP2430_CONTROL_PADCONF_AD2DSREAD_OFFSET		0x14d
+#define OMAP2430_CONTROL_PADCONF_D2DSWAKEUP_OFFSET		0x14e
+#define OMAP2430_CONTROL_PADCONF_D2DIDLEREQ_OFFSET		0x14f
+#define OMAP2430_CONTROL_PADCONF_D2DIDLEACK_OFFSET		0x150
+#define OMAP2430_CONTROL_PADCONF_D2DSPARE0_OFFSET		0x151
+#define OMAP2430_CONTROL_PADCONF_AD2DSWRITE_OFFSET		0x152
+#define OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET		0x153
+
+#define OMAP2430_CONTROL_PADCONF_MUX_SIZE			\
+		(OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET + 0x1)
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 2ff4dce95ee8..574e54ea3ab7 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -931,7 +931,7 @@ struct omap_ball __initdata omap3_cbc_ball[] = {
  * Signals different on CUS package compared to superset
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS)
-struct omap_mux __initdata omap3_cus_subset[] = {
+static struct omap_mux __initdata omap3_cus_subset[] = {
 	_OMAP3_MUXENTRY(CAM_D10, 109,
 		"cam_d10", NULL, NULL, NULL,
 		"gpio_109", NULL, NULL, "safe_mode"),
@@ -1077,7 +1077,7 @@ struct omap_mux __initdata omap3_cus_subset[] = {
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
 		&& defined(CONFIG_OMAP_PACKAGE_CUS)
-struct omap_ball __initdata omap3_cus_ball[] = {
+static struct omap_ball __initdata omap3_cus_ball[] = {
 	_OMAP3_BALLENTRY(CAM_D0, "ab18", NULL),
 	_OMAP3_BALLENTRY(CAM_D1, "ac18", NULL),
 	_OMAP3_BALLENTRY(CAM_D10, "f21", NULL),
@@ -1269,7 +1269,7 @@ struct omap_ball __initdata omap3_cus_ball[] = {
  * Signals different on CBB package comapared to superset
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB)
-struct omap_mux __initdata omap3_cbb_subset[] = {
+static struct omap_mux __initdata omap3_cbb_subset[] = {
 	_OMAP3_MUXENTRY(CAM_D10, 109,
 		"cam_d10", NULL, NULL, NULL,
 		"gpio_109", NULL, NULL, "safe_mode"),
@@ -1390,7 +1390,7 @@ struct omap_mux __initdata omap3_cbb_subset[] = {
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
 		&& defined(CONFIG_OMAP_PACKAGE_CBB)
-struct omap_ball __initdata omap3_cbb_ball[] = {
+static struct omap_ball __initdata omap3_cbb_ball[] = {
 	_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
 	_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
 	_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
@@ -1600,7 +1600,7 @@ struct omap_ball __initdata omap3_cbb_ball[] = {
  * Signals different on 36XX CBP package comapared to 34XX CBC package
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP)
-struct omap_mux __initdata omap36xx_cbp_subset[] = {
+static struct omap_mux __initdata omap36xx_cbp_subset[] = {
 	_OMAP3_MUXENTRY(CAM_D0, 99,
 		"cam_d0", NULL, "csi2_dx2", NULL,
 		"gpio_99", NULL, NULL, "safe_mode"),
@@ -1818,7 +1818,7 @@ struct omap_mux __initdata omap36xx_cbp_subset[] = {
  */
 #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
 		&& defined (CONFIG_OMAP_PACKAGE_CBP)
-struct omap_ball __initdata omap36xx_cbp_ball[] = {
+static struct omap_ball __initdata omap36xx_cbp_ball[] = {
 	_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
 	_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
 	_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
@@ -2032,19 +2032,19 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
 	struct omap_ball *package_balls;
 
 	switch (flags & OMAP_PACKAGE_MASK) {
-	case (OMAP_PACKAGE_CBC):
+	case OMAP_PACKAGE_CBC:
 		package_subset = omap3_cbc_subset;
 		package_balls = omap3_cbc_ball;
 		break;
-	case (OMAP_PACKAGE_CBB):
+	case OMAP_PACKAGE_CBB:
 		package_subset = omap3_cbb_subset;
 		package_balls = omap3_cbb_ball;
 		break;
-	case (OMAP_PACKAGE_CUS):
+	case OMAP_PACKAGE_CUS:
 		package_subset = omap3_cus_subset;
 		package_balls = omap3_cus_ball;
 		break;
-	case (OMAP_PACKAGE_CBP):
+	case OMAP_PACKAGE_CBP:
 		package_subset = omap36xx_cbp_subset;
 		package_balls = omap36xx_cbp_ball;
 		break;
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index ef0e7a00dd6c..6ae937a06cc1 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -47,19 +47,3 @@ hold:	ldr	r12,=0x103
 	b	secondary_startup
 END(omap_secondary_startup)
 
-
-ENTRY(omap_modify_auxcoreboot0)
-	stmfd   sp!, {r1-r12, lr}
-	ldr	r12, =0x104
-	dsb
-	smc	#0
-	ldmfd   sp!, {r1-r12, pc}
-END(omap_modify_auxcoreboot0)
-
-ENTRY(omap_auxcoreboot_addr)
-	stmfd   sp!, {r2-r12, lr}
-	ldr	r12, =0x105
-	dsb
-	smc	#0
-	ldmfd   sp!, {r2-r12, pc}
-END(omap_auxcoreboot_addr)
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
new file mode 100644
index 000000000000..6cee456ca542
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -0,0 +1,79 @@
+/*
+ * OMAP4 SMP cpu-hotplug support
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Platform file needed for the OMAP4 SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2002 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+#include <asm/cacheflush.h>
+#include <mach/omap4-common.h>
+
+static DECLARE_COMPLETION(cpu_killed);
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+	unsigned int this_cpu = hard_smp_processor_id();
+
+	if (cpu != this_cpu) {
+		pr_crit("platform_cpu_die running on %u, should be %u\n",
+			   this_cpu, cpu);
+		BUG();
+	}
+	pr_notice("CPU%u: shutdown\n", cpu);
+	complete(&cpu_killed);
+	flush_cache_all();
+	dsb();
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
+		printk(KERN_CRIT "Secure clear status failed\n");
+
+	for (;;) {
+		/*
+		 * Execute WFI
+		 */
+		do_wfi();
+
+		if (omap_read_auxcoreboot0() == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+		pr_debug("CPU%u: spurious wakeup call\n", cpu);
+	}
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index eb9bee73e0cb..f5a1aad1a5c0 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -59,7 +59,7 @@ static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
 static struct iommu_device omap4_devices[] = {
 	{
 		.base = OMAP4_MMU1_BASE,
-		.irq = INT_44XX_DUCATI_MMU_IRQ,
+		.irq = OMAP44XX_IRQ_DUCATI_MMU,
 		.pdata = {
 			.name = "ducati",
 			.nr_tlb_entries = 32,
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 1cf52313759e..9e9f70e18e3c 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -73,9 +73,10 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the AuxCoreBoot1 register is updated with cpu state
 	 * A barrier is added to ensure that write buffer is drained
 	 */
-	omap_modify_auxcoreboot0(0x200, 0x0);
+	omap_modify_auxcoreboot0(0x200, 0xfffffdff);
 	flush_cache_all();
 	smp_wmb();
+	smp_cross_call(cpumask_of(cpu));
 
 	/*
 	 * Now the secondary core is starting up let it run its
@@ -101,8 +102,7 @@ static void __init wakeup_secondary(void)
 	 * Send a 'sev' to wake the secondary core from WFE.
 	 * Drain the outstanding writes to memory
 	 */
-	dsb();
-	set_event();
+	dsb_sev();
 	mb();
 }
 
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 13dc9794dcc2..2f895553e6a8 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -44,6 +44,13 @@ void __init gic_init_irq(void)
 }
 
 #ifdef CONFIG_CACHE_L2X0
+
+static void omap4_l2x0_disable(void)
+{
+	/* Disable PL310 L2 Cache controller */
+	omap_smc1(0x102, 0x0);
+}
+
 static int __init omap_l2_cache_init(void)
 {
 	/*
@@ -61,10 +68,20 @@ static int __init omap_l2_cache_init(void)
 	omap_smc1(0x102, 0x1);
 
 	/*
-	 * 32KB way size, 16-way associativity,
-	 * parity disabled
+	 * 16-way associativity, parity disabled
+	 * Way size - 32KB (es1.0)
+	 * Way size - 64KB (es2.0 +)
 	 */
-	l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
+	if (omap_rev() == OMAP4430_REV_ES1_0)
+		l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
+	else
+		l2x0_init(l2cache_base, 0x0e070000, 0xc0000fff);
+
+	/*
+	 * Override default outer_cache.disable with a OMAP4
+	 * specific one
+	*/
+	outer_cache.disable = omap4_l2x0_disable;
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap44xx-smc.S
index f61c7771ca47..1980dc31a1a2 100644
--- a/arch/arm/mach-omap2/omap44xx-smc.S
+++ b/arch/arm/mach-omap2/omap44xx-smc.S
@@ -30,3 +30,28 @@ ENTRY(omap_smc1)
 	smc	#0
 	ldmfd   sp!, {r2-r12, pc}
 END(omap_smc1)
+
+ENTRY(omap_modify_auxcoreboot0)
+	stmfd   sp!, {r1-r12, lr}
+	ldr	r12, =0x104
+	dsb
+	smc	#0
+	ldmfd   sp!, {r1-r12, pc}
+END(omap_modify_auxcoreboot0)
+
+ENTRY(omap_auxcoreboot_addr)
+	stmfd   sp!, {r2-r12, lr}
+	ldr	r12, =0x105
+	dsb
+	smc	#0
+	ldmfd   sp!, {r2-r12, pc}
+END(omap_auxcoreboot_addr)
+
+ENTRY(omap_read_auxcoreboot0)
+	stmfd   sp!, {r2-r12, lr}
+	ldr	r12, =0x103
+	dsb
+	smc	#0
+	mov	r0, r0, lsr #9
+	ldmfd   sp!, {r2-r12, pc}
+END(omap_read_auxcoreboot0)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b7a4133267d8..5a30658444d0 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1,7 +1,7 @@
 /*
  * omap_hwmod implementation for OMAP2/3/4
  *
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley, Benoît Cousson, Kevin Hilman
  *
@@ -13,10 +13,102 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * This code manages "OMAP modules" (on-chip devices) and their
- * integration with Linux device driver and bus code.
- *
- * References:
+ * Introduction
+ * ------------
+ * One way to view an OMAP SoC is as a collection of largely unrelated
+ * IP blocks connected by interconnects.  The IP blocks include
+ * devices such as ARM processors, audio serial interfaces, UARTs,
+ * etc.  Some of these devices, like the DSP, are created by TI;
+ * others, like the SGX, largely originate from external vendors.  In
+ * TI's documentation, on-chip devices are referred to as "OMAP
+ * modules."  Some of these IP blocks are identical across several
+ * OMAP versions.  Others are revised frequently.
+ *
+ * These OMAP modules are tied together by various interconnects.
+ * Most of the address and data flow between modules is via OCP-based
+ * interconnects such as the L3 and L4 buses; but there are other
+ * interconnects that distribute the hardware clock tree, handle idle
+ * and reset signaling, supply power, and connect the modules to
+ * various pads or balls on the OMAP package.
+ *
+ * OMAP hwmod provides a consistent way to describe the on-chip
+ * hardware blocks and their integration into the rest of the chip.
+ * This description can be automatically generated from the TI
+ * hardware database.  OMAP hwmod provides a standard, consistent API
+ * to reset, enable, idle, and disable these hardware blocks.  And
+ * hwmod provides a way for other core code, such as the Linux device
+ * code or the OMAP power management and address space mapping code,
+ * to query the hardware database.
+ *
+ * Using hwmod
+ * -----------
+ * Drivers won't call hwmod functions directly.  That is done by the
+ * omap_device code, and in rare occasions, by custom integration code
+ * in arch/arm/ *omap*.  The omap_device code includes functions to
+ * build a struct platform_device using omap_hwmod data, and that is
+ * currently how hwmod data is communicated to drivers and to the
+ * Linux driver model.  Most drivers will call omap_hwmod functions only
+ * indirectly, via pm_runtime*() functions.
+ *
+ * From a layering perspective, here is where the OMAP hwmod code
+ * fits into the kernel software stack:
+ *
+ *            +-------------------------------+
+ *            |      Device driver code       |
+ *            |      (e.g., drivers/)         |
+ *            +-------------------------------+
+ *            |      Linux driver model       |
+ *            |     (platform_device /        |
+ *            |  platform_driver data/code)   |
+ *            +-------------------------------+
+ *            | OMAP core-driver integration  |
+ *            |(arch/arm/mach-omap2/devices.c)|
+ *            +-------------------------------+
+ *            |      omap_device code         |
+ *            | (../plat-omap/omap_device.c)  |
+ *            +-------------------------------+
+ *   ---->    |    omap_hwmod code/data       |    <-----
+ *            | (../mach-omap2/omap_hwmod*)   |
+ *            +-------------------------------+
+ *            | OMAP clock/PRCM/register fns  |
+ *            | (__raw_{read,write}l, clk*)   |
+ *            +-------------------------------+
+ *
+ * Device drivers should not contain any OMAP-specific code or data in
+ * them.  They should only contain code to operate the IP block that
+ * the driver is responsible for.  This is because these IP blocks can
+ * also appear in other SoCs, either from TI (such as DaVinci) or from
+ * other manufacturers; and drivers should be reusable across other
+ * platforms.
+ *
+ * The OMAP hwmod code also will attempt to reset and idle all on-chip
+ * devices upon boot.  The goal here is for the kernel to be
+ * completely self-reliant and independent from bootloaders.  This is
+ * to ensure a repeatable configuration, both to ensure consistent
+ * runtime behavior, and to make it easier for others to reproduce
+ * bugs.
+ *
+ * OMAP module activity states
+ * ---------------------------
+ * The hwmod code considers modules to be in one of several activity
+ * states.  IP blocks start out in an UNKNOWN state, then once they
+ * are registered via the hwmod code, proceed to the REGISTERED state.
+ * Once their clock names are resolved to clock pointers, the module
+ * enters the CLKS_INITED state; and finally, once the module has been
+ * reset and the integration registers programmed, the INITIALIZED state
+ * is entered.  The hwmod code will then place the module into either
+ * the IDLE state to save power, or in the case of a critical system
+ * module, the ENABLED state.
+ *
+ * OMAP core integration code can then call omap_hwmod*() functions
+ * directly to move the module between the IDLE, ENABLED, and DISABLED
+ * states, as needed.  This is done during both the PM idle loop, and
+ * in the OMAP core integration code's implementation of the PM runtime
+ * functions.
+ *
+ * References
+ * ----------
+ * This is a partial list.
  * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
  * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
  * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
@@ -50,11 +142,13 @@
 #include <plat/powerdomain.h>
 #include <plat/clock.h>
 #include <plat/omap_hwmod.h>
+#include <plat/prcm.h>
 
 #include "cm.h"
+#include "prm.h"
 
-/* Maximum microseconds to wait for OMAP module to reset */
-#define MAX_MODULE_RESET_WAIT		10000
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT	10000
 
 /* Name of the OMAP hwmod for the MPU */
 #define MPU_INITIATOR_NAME		"mpu"
@@ -90,7 +184,7 @@ static int _update_sysc_cache(struct omap_hwmod *oh)
 
 	/* XXX ensure module interface clock is up */
 
-	oh->_sysc_cache = omap_hwmod_readl(oh, oh->class->sysc->sysc_offs);
+	oh->_sysc_cache = omap_hwmod_read(oh, oh->class->sysc->sysc_offs);
 
 	if (!(oh->class->sysc->sysc_flags & SYSC_NO_CACHE))
 		oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
@@ -117,7 +211,7 @@ static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
 
 	if (oh->_sysc_cache != v) {
 		oh->_sysc_cache = v;
-		omap_hwmod_writel(v, oh, oh->class->sysc->sysc_offs);
+		omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);
 	}
 }
 
@@ -423,7 +517,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
 }
 
 /**
- * _init_interface_clk - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
  * @oh: struct omap_hwmod *
  *
  * Called from _init_clocks().  Populates the @oh OCP slave interface
@@ -544,6 +638,36 @@ static int _disable_clocks(struct omap_hwmod *oh)
 	return 0;
 }
 
+static void _enable_optional_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int i;
+
+	pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk) {
+			pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
+				 oc->_clk->name);
+			clk_enable(oc->_clk);
+		}
+}
+
+static void _disable_optional_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int i;
+
+	pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk) {
+			pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
+				 oc->_clk->name);
+			clk_disable(oc->_clk);
+		}
+}
+
 /**
  * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
  * @oh: struct omap_hwmod *
@@ -622,7 +746,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 }
 
 /**
- * _sysc_enable - try to bring a module out of idle via OCP_SYSCONFIG
+ * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
  * If module is marked as SWSUP_SIDLE, force the module out of slave
@@ -630,7 +754,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
  * as SWSUP_MSUSPEND, force the module out of master standby;
  * otherwise, configure it for smart-standby.  No return value.
  */
-static void _sysc_enable(struct omap_hwmod *oh)
+static void _enable_sysc(struct omap_hwmod *oh)
 {
 	u8 idlemode, sf;
 	u32 v;
@@ -653,14 +777,6 @@ static void _sysc_enable(struct omap_hwmod *oh)
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
-	if (sf & SYSC_HAS_AUTOIDLE) {
-		idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
-			0 : 1;
-		_set_module_autoidle(oh, idlemode, &v);
-	}
-
-	/* XXX OCP ENAWAKEUP bit? */
-
 	/*
 	 * XXX The clock framework should handle this, by
 	 * calling into this code.  But this must wait until the
@@ -671,10 +787,25 @@ static void _sysc_enable(struct omap_hwmod *oh)
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
 	_write_sysconfig(v, oh);
+
+	/* If slave is in SMARTIDLE, also enable wakeup */
+	if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
+		_enable_wakeup(oh);
+
+	/*
+	 * Set the autoidle bit only after setting the smartidle bit
+	 * Setting this will not have any impact on the other modules.
+	 */
+	if (sf & SYSC_HAS_AUTOIDLE) {
+		idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
+			0 : 1;
+		_set_module_autoidle(oh, idlemode, &v);
+		_write_sysconfig(v, oh);
+	}
 }
 
 /**
- * _sysc_idle - try to put a module into idle via OCP_SYSCONFIG
+ * _idle_sysc - try to put a module into idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
  * If module is marked as SWSUP_SIDLE, force the module into slave
@@ -682,7 +813,7 @@ static void _sysc_enable(struct omap_hwmod *oh)
  * as SWSUP_MSUSPEND, force the module into master standby; otherwise,
  * configure it for smart-standby.  No return value.
  */
-static void _sysc_idle(struct omap_hwmod *oh)
+static void _idle_sysc(struct omap_hwmod *oh)
 {
 	u8 idlemode, sf;
 	u32 v;
@@ -709,13 +840,13 @@ static void _sysc_idle(struct omap_hwmod *oh)
 }
 
 /**
- * _sysc_shutdown - force a module into idle via OCP_SYSCONFIG
+ * _shutdown_sysc - force a module into idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
  * Force the module into slave idle and master suspend. No return
  * value.
  */
-static void _sysc_shutdown(struct omap_hwmod *oh)
+static void _shutdown_sysc(struct omap_hwmod *oh)
 {
 	u32 v;
 	u8 sf;
@@ -764,14 +895,15 @@ static struct omap_hwmod *_lookup(const char *name)
 /**
  * _init_clocks - clk_get() all clocks associated with this hwmod
  * @oh: struct omap_hwmod *
+ * @data: not used; pass NULL
  *
  * Called by omap_hwmod_late_init() (after omap2_clk_init()).
- * Resolves all clock names embedded in the hwmod.  Must be called
- * with omap_hwmod_mutex held.  Returns -EINVAL if the omap_hwmod
- * has not yet been registered or if the clocks have already been
- * initialized, 0 on success, or a non-zero error on failure.
+ * Resolves all clock names embedded in the hwmod.  Returns -EINVAL if
+ * the omap_hwmod has not yet been registered or if the clocks have
+ * already been initialized, 0 on success, or a non-zero error on
+ * failure.
  */
-static int _init_clocks(struct omap_hwmod *oh)
+static int _init_clocks(struct omap_hwmod *oh, void *data)
 {
 	int ret = 0;
 
@@ -833,68 +965,216 @@ static int _wait_target_ready(struct omap_hwmod *oh)
 }
 
 /**
+ * _lookup_hardreset - return the register bit shift for this hwmod/reset line
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line in the context of this hwmod
+ *
+ * Return the bit position of the reset line that match the
+ * input name. Return -ENOENT if not found.
+ */
+static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int i;
+
+	for (i = 0; i < oh->rst_lines_cnt; i++) {
+		const char *rst_line = oh->rst_lines[i].name;
+		if (!strcmp(rst_line, name)) {
+			u8 shift = oh->rst_lines[i].rst_shift;
+			pr_debug("omap_hwmod: %s: _lookup_hardreset: %s: %d\n",
+				 oh->name, rst_line, shift);
+
+			return shift;
+		}
+	}
+
+	return -ENOENT;
+}
+
+/**
+ * _assert_hardreset - assert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to lookup and assert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.
+ */
+static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	u8 shift;
+
+	if (!oh)
+		return -EINVAL;
+
+	shift = _lookup_hardreset(oh, name);
+	if (IS_ERR_VALUE(shift))
+		return shift;
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
+						  shift);
+	else if (cpu_is_omap44xx())
+		return omap4_prm_assert_hardreset(oh->prcm.omap4.rstctrl_reg,
+						  shift);
+	else
+		return -EINVAL;
+}
+
+/**
+ * _deassert_hardreset - deassert the HW reset line of submodules contained
+ * in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and deassert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.
+ */
+static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	u8 shift;
+	int r;
+
+	if (!oh)
+		return -EINVAL;
+
+	shift = _lookup_hardreset(oh, name);
+	if (IS_ERR_VALUE(shift))
+		return shift;
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		r = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
+						 shift);
+	else if (cpu_is_omap44xx())
+		r = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg,
+						 shift);
+	else
+		return -EINVAL;
+
+	if (r == -EBUSY)
+		pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
+
+	return r;
+}
+
+/**
+ * _read_hardreset - read the HW reset line state of submodules
+ * contained in the hwmod module
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and read
+ *
+ * Return the state of the reset line.
+ */
+static int _read_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	u8 shift;
+
+	if (!oh)
+		return -EINVAL;
+
+	shift = _lookup_hardreset(oh, name);
+	if (IS_ERR_VALUE(shift))
+		return shift;
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
+						       shift);
+	} else if (cpu_is_omap44xx()) {
+		return omap4_prm_is_hardreset_asserted(oh->prcm.omap4.rstctrl_reg,
+						       shift);
+	} else {
+		return -EINVAL;
+	}
+}
+
+/**
  * _reset - reset an omap_hwmod
  * @oh: struct omap_hwmod *
  *
  * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit.  hwmod must be
- * enabled for this to work.  Must be called with omap_hwmod_mutex
- * held.  Returns -EINVAL if the hwmod cannot be reset this way or if
- * the hwmod is in the wrong state, -ETIMEDOUT if the module did not
- * reset in time, or 0 upon success.
+ * enabled for this to work.  Returns -EINVAL if the hwmod cannot be
+ * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
+ * the module did not reset in time, or 0 upon success.
+ *
+ * In OMAP3 a specific SYSSTATUS register is used to get the reset status.
+ * Starting in OMAP4, some IPs does not have SYSSTATUS register and instead
+ * use the SYSCONFIG softreset bit to provide the status.
+ *
+ * Note that some IP like McBSP does have a reset control but no reset status.
  */
 static int _reset(struct omap_hwmod *oh)
 {
-	u32 r, v;
+	u32 v;
 	int c = 0;
+	int ret = 0;
 
 	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET) ||
-	    (oh->class->sysc->sysc_flags & SYSS_MISSING))
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
 		return -EINVAL;
 
 	/* clocks must be on for this operation */
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
-		WARN(1, "omap_hwmod: %s: reset can only be entered from "
-		     "enabled state\n", oh->name);
+		pr_warning("omap_hwmod: %s: reset can only be entered from "
+			   "enabled state\n", oh->name);
 		return -EINVAL;
 	}
 
+	/* For some modules, all optionnal clocks need to be enabled as well */
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_enable_optional_clocks(oh);
+
 	pr_debug("omap_hwmod: %s: resetting\n", oh->name);
 
 	v = oh->_sysc_cache;
-	r = _set_softreset(oh, &v);
-	if (r)
-		return r;
+	ret = _set_softreset(oh, &v);
+	if (ret)
+		goto dis_opt_clks;
 	_write_sysconfig(v, oh);
 
-	omap_test_timeout((omap_hwmod_readl(oh, oh->class->sysc->syss_offs) &
-			   SYSS_RESETDONE_MASK),
-			  MAX_MODULE_RESET_WAIT, c);
-
-	if (c == MAX_MODULE_RESET_WAIT)
-		WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
-		     oh->name, MAX_MODULE_RESET_WAIT);
+	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
+		omap_test_timeout((omap_hwmod_read(oh,
+						    oh->class->sysc->syss_offs)
+				   & SYSS_RESETDONE_MASK),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS)
+		omap_test_timeout(!(omap_hwmod_read(oh,
+						     oh->class->sysc->sysc_offs)
+				   & SYSC_TYPE2_SOFTRESET_MASK),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
+			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
-		pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name, c);
+		pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
 
 	/*
 	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
 	 * _wait_target_ready() or _reset()
 	 */
 
-	return (c == MAX_MODULE_RESET_WAIT) ? -ETIMEDOUT : 0;
+	ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
+
+dis_opt_clks:
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_disable_optional_clocks(oh);
+
+	return ret;
 }
 
 /**
- * _enable - enable an omap_hwmod
+ * _omap_hwmod_enable - enable an omap_hwmod
  * @oh: struct omap_hwmod *
  *
  * Enables an omap_hwmod @oh such that the MPU can access the hwmod's
- * register target.  Must be called with omap_hwmod_mutex held.
- * Returns -EINVAL if the hwmod is in the wrong state or passes along
- * the return value of _wait_target_ready().
+ * register target.  (This function has a full name --
+ * _omap_hwmod_enable() rather than simply _enable() -- because it is
+ * currently required by the pm34xx.c idle loop.)  Returns -EINVAL if
+ * the hwmod is in the wrong state or passes along the return value of
+ * _wait_target_ready().
  */
-static int _enable(struct omap_hwmod *oh)
+int _omap_hwmod_enable(struct omap_hwmod *oh)
 {
 	int r;
 
@@ -908,6 +1188,15 @@ static int _enable(struct omap_hwmod *oh)
 
 	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
 
+	/*
+	 * If an IP contains only one HW reset line, then de-assert it in order
+	 * to allow to enable the clocks. Otherwise the PRCM will return
+	 * Intransition status, and the init will failed.
+	 */
+	if ((oh->_state == _HWMOD_STATE_INITIALIZED ||
+	     oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
+		_deassert_hardreset(oh, oh->rst_lines[0].name);
+
 	/* XXX mux balls */
 
 	_add_initiator_dep(oh, mpu_oh);
@@ -921,7 +1210,7 @@ static int _enable(struct omap_hwmod *oh)
 		if (oh->class->sysc) {
 			if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
 				_update_sysc_cache(oh);
-			_sysc_enable(oh);
+			_enable_sysc(oh);
 		}
 	} else {
 		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
@@ -932,14 +1221,16 @@ static int _enable(struct omap_hwmod *oh)
 }
 
 /**
- * _idle - idle an omap_hwmod
+ * _omap_hwmod_idle - idle an omap_hwmod
  * @oh: struct omap_hwmod *
  *
  * Idles an omap_hwmod @oh.  This should be called once the hwmod has
- * no further work.  Returns -EINVAL if the hwmod is in the wrong
- * state or returns 0.
+ * no further work.  (This function has a full name --
+ * _omap_hwmod_idle() rather than simply _idle() -- because it is
+ * currently required by the pm34xx.c idle loop.)  Returns -EINVAL if
+ * the hwmod is in the wrong state or returns 0.
  */
-static int _idle(struct omap_hwmod *oh)
+int _omap_hwmod_idle(struct omap_hwmod *oh)
 {
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
 		WARN(1, "omap_hwmod: %s: idle state can only be entered from "
@@ -950,7 +1241,7 @@ static int _idle(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: idling\n", oh->name);
 
 	if (oh->class->sysc)
-		_sysc_idle(oh);
+		_idle_sysc(oh);
 	_del_initiator_dep(oh, mpu_oh);
 	_disable_clocks(oh);
 
@@ -980,10 +1271,21 @@ static int _shutdown(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
 
 	if (oh->class->sysc)
-		_sysc_shutdown(oh);
-	_del_initiator_dep(oh, mpu_oh);
-	/* XXX what about the other system initiators here? DMA, tesla, d2d */
-	_disable_clocks(oh);
+		_shutdown_sysc(oh);
+
+	/*
+	 * If an IP contains only one HW reset line, then assert it
+	 * before disabling the clocks and shutting down the IP.
+	 */
+	if (oh->rst_lines_cnt == 1)
+		_assert_hardreset(oh, oh->rst_lines[0].name);
+
+	/* clocks and deps are already disabled in idle */
+	if (oh->_state == _HWMOD_STATE_ENABLED) {
+		_del_initiator_dep(oh, mpu_oh);
+		/* XXX what about the other system initiators here? dma, dsp */
+		_disable_clocks(oh);
+	}
 	/* XXX Should this code also force-disable the optional clocks? */
 
 	/* XXX mux any associated balls to safe mode */
@@ -996,19 +1298,24 @@ static int _shutdown(struct omap_hwmod *oh)
 /**
  * _setup - do initial configuration of omap_hwmod
  * @oh: struct omap_hwmod *
+ * @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1
  *
  * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register.  Must be called with omap_hwmod_mutex
- * held.  Returns -EINVAL if the hwmod is in the wrong state or returns
- * 0.
+ * OCP_SYSCONFIG register.  @skip_setup_idle is intended to be used on
+ * a system that will not call omap_hwmod_enable() to enable devices
+ * (e.g., a system without PM runtime).  Returns -EINVAL if the hwmod
+ * is in the wrong state or returns 0.
  */
-static int _setup(struct omap_hwmod *oh)
+static int _setup(struct omap_hwmod *oh, void *data)
 {
 	int i, r;
+	u8 skip_setup_idle;
 
-	if (!oh)
+	if (!oh || !data)
 		return -EINVAL;
 
+	skip_setup_idle = *(u8 *)data;
+
 	/* Set iclk autoidle mode */
 	if (oh->slaves_cnt > 0) {
 		for (i = 0; i < oh->slaves_cnt; i++) {
@@ -1027,9 +1334,20 @@ static int _setup(struct omap_hwmod *oh)
 		}
 	}
 
+	mutex_init(&oh->_mutex);
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
-	r = _enable(oh);
+	/*
+	 * In the case of hwmod with hardreset that should not be
+	 * de-assert at boot time, we have to keep the module
+	 * initialized, because we cannot enable it properly with the
+	 * reset asserted. Exit without warning because that behavior is
+	 * expected.
+	 */
+	if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1)
+		return 0;
+
+	r = _omap_hwmod_enable(oh);
 	if (r) {
 		pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
 			   oh->name, oh->_state);
@@ -1037,21 +1355,21 @@ static int _setup(struct omap_hwmod *oh)
 	}
 
 	if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
+		_reset(oh);
+
 		/*
-		 * XXX Do the OCP_SYSCONFIG bits need to be
-		 * reprogrammed after a reset?  If not, then this can
-		 * be removed.  If they do, then probably the
-		 * _enable() function should be split to avoid the
-		 * rewrite of the OCP_SYSCONFIG register.
+		 * OCP_SYSCONFIG bits need to be reprogrammed after a softreset.
+		 * The _omap_hwmod_enable() function should be split to
+		 * avoid the rewrite of the OCP_SYSCONFIG register.
 		 */
 		if (oh->class->sysc) {
 			_update_sysc_cache(oh);
-			_sysc_enable(oh);
+			_enable_sysc(oh);
 		}
 	}
 
-	if (!(oh->flags & HWMOD_INIT_NO_IDLE))
-		_idle(oh);
+	if (!(oh->flags & HWMOD_INIT_NO_IDLE) && !skip_setup_idle)
+		_omap_hwmod_idle(oh);
 
 	return 0;
 }
@@ -1060,16 +1378,37 @@ static int _setup(struct omap_hwmod *oh)
 
 /* Public functions */
 
-u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs)
+u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
 {
-	return __raw_readl(oh->_rt_va + reg_offs);
+	if (oh->flags & HWMOD_16BIT_REG)
+		return __raw_readw(oh->_mpu_rt_va + reg_offs);
+	else
+		return __raw_readl(oh->_mpu_rt_va + reg_offs);
 }
 
-void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs)
+void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
 {
-	__raw_writel(v, oh->_rt_va + reg_offs);
+	if (oh->flags & HWMOD_16BIT_REG)
+		__raw_writew(v, oh->_mpu_rt_va + reg_offs);
+	else
+		__raw_writel(v, oh->_mpu_rt_va + reg_offs);
 }
 
+/**
+ * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
+ * @oh: struct omap_hwmod *
+ * @idlemode: SIDLEMODE field bits (shifted to bit 0)
+ *
+ * Sets the IP block's OCP slave idlemode in hardware, and updates our
+ * local copy.  Intended to be used by drivers that have some erratum
+ * that requires direct manipulation of the SIDLEMODE bits.  Returns
+ * -EINVAL if @oh is null, or passes along the return value from
+ * _set_slave_idlemode().
+ *
+ * XXX Does this function have any current users?  If not, we should
+ * remove it; it is better to let the rest of the hwmod code handle this.
+ * Any users of this function should be scrutinized carefully.
+ */
 int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
 {
 	u32 v;
@@ -1124,7 +1463,7 @@ int omap_hwmod_register(struct omap_hwmod *oh)
 	ms_id = _find_mpu_port_index(oh);
 	if (!IS_ERR_VALUE(ms_id)) {
 		oh->_mpu_port_index = ms_id;
-		oh->_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
+		oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
 	} else {
 		oh->_int_flags |= _HWMOD_NO_MPU_PORT;
 	}
@@ -1164,6 +1503,7 @@ struct omap_hwmod *omap_hwmod_lookup(const char *name)
 /**
  * omap_hwmod_for_each - call function for each registered omap_hwmod
  * @fn: pointer to a callback function
+ * @data: void * data to pass to callback function
  *
  * Call @fn for each registered omap_hwmod, passing @data to each
  * function.  @fn must return 0 for success or any other value for
@@ -1172,7 +1512,8 @@ struct omap_hwmod *omap_hwmod_lookup(const char *name)
  * caller of omap_hwmod_for_each().  @fn is called with
  * omap_hwmod_for_each() held.
  */
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh))
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
+			void *data)
 {
 	struct omap_hwmod *temp_oh;
 	int ret;
@@ -1182,7 +1523,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh))
 
 	mutex_lock(&omap_hwmod_mutex);
 	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
-		ret = (*fn)(temp_oh);
+		ret = (*fn)(temp_oh, data);
 		if (ret)
 			break;
 	}
@@ -1229,24 +1570,28 @@ int omap_hwmod_init(struct omap_hwmod **ohs)
 
 /**
  * omap_hwmod_late_init - do some post-clock framework initialization
+ * @skip_setup_idle: if 1, do not idle hwmods in _setup()
  *
  * Must be called after omap2_clk_init().  Resolves the struct clk names
  * to struct clk pointers for each registered omap_hwmod.  Also calls
  * _setup() on each hwmod.  Returns 0.
  */
-int omap_hwmod_late_init(void)
+int omap_hwmod_late_init(u8 skip_setup_idle)
 {
 	int r;
 
 	/* XXX check return value */
-	r = omap_hwmod_for_each(_init_clocks);
+	r = omap_hwmod_for_each(_init_clocks, NULL);
 	WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n");
 
 	mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME);
 	WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n",
 	     MPU_INITIATOR_NAME);
 
-	omap_hwmod_for_each(_setup);
+	if (skip_setup_idle)
+		pr_debug("omap_hwmod: will leave hwmods enabled during setup\n");
+
+	omap_hwmod_for_each(_setup, &skip_setup_idle);
 
 	return 0;
 }
@@ -1270,7 +1615,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
 
 	mutex_lock(&omap_hwmod_mutex);
-	iounmap(oh->_rt_va);
+	iounmap(oh->_mpu_rt_va);
 	list_del(&oh->node);
 	mutex_unlock(&omap_hwmod_mutex);
 
@@ -1281,7 +1626,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
  * omap_hwmod_enable - enable an omap_hwmod
  * @oh: struct omap_hwmod *
  *
- * Enable an omap_hwomd @oh.  Intended to be called by omap_device_enable().
+ * Enable an omap_hwmod @oh.  Intended to be called by omap_device_enable().
  * Returns -EINVAL on error or passes along the return value from _enable().
  */
 int omap_hwmod_enable(struct omap_hwmod *oh)
@@ -1291,18 +1636,19 @@ int omap_hwmod_enable(struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
-	r = _enable(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
+	r = _omap_hwmod_enable(oh);
+	mutex_unlock(&oh->_mutex);
 
 	return r;
 }
 
+
 /**
  * omap_hwmod_idle - idle an omap_hwmod
  * @oh: struct omap_hwmod *
  *
- * Idle an omap_hwomd @oh.  Intended to be called by omap_device_idle().
+ * Idle an omap_hwmod @oh.  Intended to be called by omap_device_idle().
  * Returns -EINVAL on error or passes along the return value from _idle().
  */
 int omap_hwmod_idle(struct omap_hwmod *oh)
@@ -1310,9 +1656,9 @@ int omap_hwmod_idle(struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
-	_idle(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
+	_omap_hwmod_idle(oh);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1321,7 +1667,7 @@ int omap_hwmod_idle(struct omap_hwmod *oh)
  * omap_hwmod_shutdown - shutdown an omap_hwmod
  * @oh: struct omap_hwmod *
  *
- * Shutdown an omap_hwomd @oh.  Intended to be called by
+ * Shutdown an omap_hwmod @oh.  Intended to be called by
  * omap_device_shutdown().  Returns -EINVAL on error or passes along
  * the return value from _shutdown().
  */
@@ -1330,9 +1676,9 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_shutdown(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1345,9 +1691,9 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh)
  */
 int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
 {
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_enable_clocks(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1360,9 +1706,9 @@ int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
  */
 int omap_hwmod_disable_clocks(struct omap_hwmod *oh)
 {
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_disable_clocks(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1392,7 +1738,7 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
 	 * Forces posted writes to complete on the OCP thread handling
 	 * register writes
 	 */
-	omap_hwmod_readl(oh, oh->class->sysc->sysc_offs);
+	omap_hwmod_read(oh, oh->class->sysc->sysc_offs);
 }
 
 /**
@@ -1401,20 +1747,18 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
  *
  * Under some conditions, a driver may wish to reset the entire device.
  * Called from omap_device code.  Returns -EINVAL on error or passes along
- * the return value from _reset()/_enable().
+ * the return value from _reset().
  */
 int omap_hwmod_reset(struct omap_hwmod *oh)
 {
 	int r;
 
-	if (!oh || !(oh->_state & _HWMOD_STATE_ENABLED))
+	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	r = _reset(oh);
-	if (!r)
-		r = _enable(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return r;
 }
@@ -1439,7 +1783,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh)
 {
 	int ret, i;
 
-	ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt;
+	ret = oh->mpu_irqs_cnt + oh->sdma_reqs_cnt;
 
 	for (i = 0; i < oh->slaves_cnt; i++)
 		ret += oh->slaves[i]->addr_cnt;
@@ -1472,10 +1816,10 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 		r++;
 	}
 
-	for (i = 0; i < oh->sdma_chs_cnt; i++) {
-		(res + r)->name = (oh->sdma_chs + i)->name;
-		(res + r)->start = (oh->sdma_chs + i)->dma_ch;
-		(res + r)->end = (oh->sdma_chs + i)->dma_ch;
+	for (i = 0; i < oh->sdma_reqs_cnt; i++) {
+		(res + r)->name = (oh->sdma_reqs + i)->name;
+		(res + r)->start = (oh->sdma_reqs + i)->dma_req;
+		(res + r)->end = (oh->sdma_reqs + i)->dma_req;
 		(res + r)->flags = IORESOURCE_DMA;
 		r++;
 	}
@@ -1530,6 +1874,29 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 }
 
 /**
+ * omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU)
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the virtual address corresponding to the beginning of the
+ * module's register target, in the address range that is intended to
+ * be used by the MPU.  Returns the virtual address upon success or NULL
+ * upon error.
+ */
+void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return NULL;
+
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return NULL;
+
+	if (oh->_state == _HWMOD_STATE_UNKNOWN)
+		return NULL;
+
+	return oh->_mpu_rt_va;
+}
+
+/**
  * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh
  * @oh: struct omap_hwmod *
  * @init_oh: struct omap_hwmod * (initiator)
@@ -1592,9 +1959,9 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
 	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_enable_wakeup(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1617,14 +1984,92 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
 	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_disable_wakeup(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
 
 /**
+ * omap_hwmod_assert_hardreset - assert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to lookup and assert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.  Returns -EINVAL if @oh is null or if the operation is not
+ * yet supported on this OMAP; otherwise, passes along the return value
+ * from _assert_hardreset().
+ */
+int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&oh->_mutex);
+	ret = _assert_hardreset(oh, name);
+	mutex_unlock(&oh->_mutex);
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_deassert_hardreset - deassert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and deassert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.  Returns -EINVAL if @oh is null or if the operation is not
+ * yet supported on this OMAP; otherwise, passes along the return value
+ * from _deassert_hardreset().
+ */
+int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&oh->_mutex);
+	ret = _deassert_hardreset(oh, name);
+	mutex_unlock(&oh->_mutex);
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_read_hardreset - read the HW reset line state of submodules
+ * contained in the hwmod module
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and read
+ *
+ * Return the current state of the hwmod @oh's reset line named @name:
+ * returns -EINVAL upon parameter error or if this operation
+ * is unsupported on the current OMAP; otherwise, passes along the return
+ * value from _read_hardreset().
+ */
+int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&oh->_mutex);
+	ret = _read_hardreset(oh, name);
+	mutex_unlock(&oh->_mutex);
+
+	return ret;
+}
+
+
+/**
  * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname
  * @classname: struct omap_hwmod_class name to search for
  * @fn: callback function pointer to call for each hwmod in class @classname
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index e5530c51f77d..adf6e3632a2b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -15,10 +15,12 @@
 #include <mach/irqs.h>
 #include <plat/cpu.h>
 #include <plat/dma.h>
+#include <plat/serial.h>
 
 #include "omap_hwmod_common_data.h"
 
 #include "prm-regbits-24xx.h"
+#include "cm-regbits-24xx.h"
 
 /*
  * OMAP2420 hardware module integration data
@@ -30,45 +32,51 @@
  */
 
 static struct omap_hwmod omap2420_mpu_hwmod;
-static struct omap_hwmod omap2420_l3_hwmod;
+static struct omap_hwmod omap2420_iva_hwmod;
+static struct omap_hwmod omap2420_l3_main_hwmod;
 static struct omap_hwmod omap2420_l4_core_hwmod;
+static struct omap_hwmod omap2420_wd_timer2_hwmod;
 
 /* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2420_l3__l4_core = {
-	.master	= &omap2420_l3_hwmod,
+static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
+	.master	= &omap2420_l3_main_hwmod,
 	.slave	= &omap2420_l4_core_hwmod,
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2420_mpu__l3 = {
+static struct omap_hwmod_ocp_if omap2420_mpu__l3_main = {
 	.master = &omap2420_mpu_hwmod,
-	.slave	= &omap2420_l3_hwmod,
+	.slave	= &omap2420_l3_main_hwmod,
 	.user	= OCP_USER_MPU,
 };
 
 /* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = {
-	&omap2420_mpu__l3,
+static struct omap_hwmod_ocp_if *omap2420_l3_main_slaves[] = {
+	&omap2420_mpu__l3_main,
 };
 
 /* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = {
-	&omap2420_l3__l4_core,
+static struct omap_hwmod_ocp_if *omap2420_l3_main_masters[] = {
+	&omap2420_l3_main__l4_core,
 };
 
 /* L3 */
-static struct omap_hwmod omap2420_l3_hwmod = {
-	.name		= "l3_hwmod",
+static struct omap_hwmod omap2420_l3_main_hwmod = {
+	.name		= "l3_main",
 	.class		= &l3_hwmod_class,
-	.masters	= omap2420_l3_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_l3_masters),
-	.slaves		= omap2420_l3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+	.masters	= omap2420_l3_main_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l3_main_masters),
+	.slaves		= omap2420_l3_main_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_main_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 static struct omap_hwmod omap2420_l4_wkup_hwmod;
+static struct omap_hwmod omap2420_uart1_hwmod;
+static struct omap_hwmod omap2420_uart2_hwmod;
+static struct omap_hwmod omap2420_uart3_hwmod;
 
 /* L4_CORE -> L4_WKUP interface */
 static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
@@ -77,25 +85,83 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* L4 CORE -> UART1 interface */
+static struct omap_hwmod_addr_space omap2420_uart1_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART1_BASE,
+		.pa_end		= OMAP2_UART1_BASE + SZ_8K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
+	.master		= &omap2420_l4_core_hwmod,
+	.slave		= &omap2420_uart1_hwmod,
+	.clk		= "uart1_ick",
+	.addr		= omap2420_uart1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_uart1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> UART2 interface */
+static struct omap_hwmod_addr_space omap2420_uart2_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART2_BASE,
+		.pa_end		= OMAP2_UART2_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
+	.master		= &omap2420_l4_core_hwmod,
+	.slave		= &omap2420_uart2_hwmod,
+	.clk		= "uart2_ick",
+	.addr		= omap2420_uart2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_uart2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART3 interface */
+static struct omap_hwmod_addr_space omap2420_uart3_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART3_BASE,
+		.pa_end		= OMAP2_UART3_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
+	.master		= &omap2420_l4_core_hwmod,
+	.slave		= &omap2420_uart3_hwmod,
+	.clk		= "uart3_ick",
+	.addr		= omap2420_uart3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_uart3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
-	&omap2420_l3__l4_core,
+	&omap2420_l3_main__l4_core,
 };
 
 /* Master interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
 	&omap2420_l4_core__l4_wkup,
+	&omap2_l4_core__uart1,
+	&omap2_l4_core__uart2,
+	&omap2_l4_core__uart3,
 };
 
 /* L4 CORE */
 static struct omap_hwmod omap2420_l4_core_hwmod = {
-	.name		= "l4_core_hwmod",
+	.name		= "l4_core",
 	.class		= &l4_hwmod_class,
 	.masters	= omap2420_l4_core_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2420_l4_core_masters),
 	.slaves		= omap2420_l4_core_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_core_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Slave interfaces on the L4_WKUP interconnect */
@@ -109,18 +175,19 @@ static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
 
 /* L4 WKUP */
 static struct omap_hwmod omap2420_l4_wkup_hwmod = {
-	.name		= "l4_wkup_hwmod",
+	.name		= "l4_wkup",
 	.class		= &l4_hwmod_class,
 	.masters	= omap2420_l4_wkup_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2420_l4_wkup_masters),
 	.slaves		= omap2420_l4_wkup_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_wkup_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Master interfaces on the MPU device */
 static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
-	&omap2420_mpu__l3,
+	&omap2420_mpu__l3_main,
 };
 
 /* MPU */
@@ -133,11 +200,234 @@ static struct omap_hwmod omap2420_mpu_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
 
+/*
+ * IVA1 interface data
+ */
+
+/* IVA <- L3 interface */
+static struct omap_hwmod_ocp_if omap2420_l3__iva = {
+	.master		= &omap2420_l3_main_hwmod,
+	.slave		= &omap2420_iva_hwmod,
+	.clk		= "iva1_ifck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap2420_iva_masters[] = {
+	&omap2420_l3__iva,
+};
+
+/*
+ * IVA2 (IVA2)
+ */
+
+static struct omap_hwmod omap2420_iva_hwmod = {
+	.name		= "iva",
+	.class		= &iva_hwmod_class,
+	.masters	= omap2420_iva_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_iva_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = {
+	{
+		.pa_start	= 0x48022000,
+		.pa_end		= 0x4802207f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_wd_timer2_hwmod,
+	.clk		= "mpu_wdt_ick",
+	.addr		= omap2420_wd_timer2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap2420_wd_timer2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/*
+ * 'wd_timer' class
+ * 32-bit watchdog upward counter that generates a pulse on the reset pin on
+ * overflow condition
+ */
+
+static struct omap_hwmod_class_sysconfig omap2420_wd_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2420_wd_timer_hwmod_class = {
+	.name = "wd_timer",
+	.sysc = &omap2420_wd_timer_sysc,
+};
+
+/* wd_timer2 */
+static struct omap_hwmod_ocp_if *omap2420_wd_timer2_slaves[] = {
+	&omap2420_l4_wkup__wd_timer2,
+};
+
+static struct omap_hwmod omap2420_wd_timer2_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &omap2420_wd_timer_hwmod_class,
+	.main_clk	= "mpu_wdt_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
+		},
+	},
+	.slaves		= omap2420_wd_timer2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_wd_timer2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* UART */
+
+static struct omap_hwmod_class_sysconfig uart_sysc = {
+	.rev_offs	= 0x50,
+	.sysc_offs	= 0x54,
+	.syss_offs	= 0x58,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class uart_class = {
+	.name = "uart",
+	.sysc = &uart_sysc,
+};
+
+/* UART1 */
+
+static struct omap_hwmod_irq_info uart1_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART1_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart1_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART1_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART1_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_uart1_slaves[] = {
+	&omap2_l4_core__uart1,
+};
+
+static struct omap_hwmod omap2420_uart1_hwmod = {
+	.name		= "uart1",
+	.mpu_irqs	= uart1_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart1_mpu_irqs),
+	.sdma_reqs	= uart1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart1_sdma_reqs),
+	.main_clk	= "uart1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_UART1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
+		},
+	},
+	.slaves		= omap2420_uart1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_uart1_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* UART2 */
+
+static struct omap_hwmod_irq_info uart2_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART2_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart2_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART2_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART2_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_uart2_slaves[] = {
+	&omap2_l4_core__uart2,
+};
+
+static struct omap_hwmod omap2420_uart2_hwmod = {
+	.name		= "uart2",
+	.mpu_irqs	= uart2_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart2_mpu_irqs),
+	.sdma_reqs	= uart2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart2_sdma_reqs),
+	.main_clk	= "uart2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_UART2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
+		},
+	},
+	.slaves		= omap2420_uart2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_uart2_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* UART3 */
+
+static struct omap_hwmod_irq_info uart3_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART3_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart3_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART3_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART3_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_uart3_slaves[] = {
+	&omap2_l4_core__uart3,
+};
+
+static struct omap_hwmod omap2420_uart3_hwmod = {
+	.name		= "uart3",
+	.mpu_irqs	= uart3_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart3_mpu_irqs),
+	.sdma_reqs	= uart3_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart3_sdma_reqs),
+	.main_clk	= "uart3_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 2,
+			.module_bit = OMAP24XX_EN_UART3_SHIFT,
+			.idlest_reg_id = 2,
+			.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
+		},
+	},
+	.slaves		= omap2420_uart3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_uart3_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
 static __initdata struct omap_hwmod *omap2420_hwmods[] = {
-	&omap2420_l3_hwmod,
+	&omap2420_l3_main_hwmod,
 	&omap2420_l4_core_hwmod,
 	&omap2420_l4_wkup_hwmod,
 	&omap2420_mpu_hwmod,
+	&omap2420_iva_hwmod,
+	&omap2420_wd_timer2_hwmod,
+	&omap2420_uart1_hwmod,
+	&omap2420_uart2_hwmod,
+	&omap2420_uart3_hwmod,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 0852d954da40..12d939e456cf 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -15,10 +15,12 @@
 #include <mach/irqs.h>
 #include <plat/cpu.h>
 #include <plat/dma.h>
+#include <plat/serial.h>
 
 #include "omap_hwmod_common_data.h"
 
 #include "prm-regbits-24xx.h"
+#include "cm-regbits-24xx.h"
 
 /*
  * OMAP2430 hardware module integration data
@@ -30,47 +32,51 @@
  */
 
 static struct omap_hwmod omap2430_mpu_hwmod;
-static struct omap_hwmod omap2430_l3_hwmod;
+static struct omap_hwmod omap2430_iva_hwmod;
+static struct omap_hwmod omap2430_l3_main_hwmod;
 static struct omap_hwmod omap2430_l4_core_hwmod;
+static struct omap_hwmod omap2430_wd_timer2_hwmod;
 
 /* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2430_l3__l4_core = {
-	.master	= &omap2430_l3_hwmod,
+static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = {
+	.master	= &omap2430_l3_main_hwmod,
 	.slave	= &omap2430_l4_core_hwmod,
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2430_mpu__l3 = {
+static struct omap_hwmod_ocp_if omap2430_mpu__l3_main = {
 	.master = &omap2430_mpu_hwmod,
-	.slave	= &omap2430_l3_hwmod,
+	.slave	= &omap2430_l3_main_hwmod,
 	.user	= OCP_USER_MPU,
 };
 
 /* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = {
-	&omap2430_mpu__l3,
+static struct omap_hwmod_ocp_if *omap2430_l3_main_slaves[] = {
+	&omap2430_mpu__l3_main,
 };
 
 /* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = {
-	&omap2430_l3__l4_core,
+static struct omap_hwmod_ocp_if *omap2430_l3_main_masters[] = {
+	&omap2430_l3_main__l4_core,
 };
 
 /* L3 */
-static struct omap_hwmod omap2430_l3_hwmod = {
-	.name		= "l3_hwmod",
+static struct omap_hwmod omap2430_l3_main_hwmod = {
+	.name		= "l3_main",
 	.class		= &l3_hwmod_class,
-	.masters	= omap2430_l3_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_l3_masters),
-	.slaves		= omap2430_l3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	.masters	= omap2430_l3_main_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l3_main_masters),
+	.slaves		= omap2430_l3_main_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_main_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 static struct omap_hwmod omap2430_l4_wkup_hwmod;
-static struct omap_hwmod omap2430_mmc1_hwmod;
-static struct omap_hwmod omap2430_mmc2_hwmod;
+static struct omap_hwmod omap2430_uart1_hwmod;
+static struct omap_hwmod omap2430_uart2_hwmod;
+static struct omap_hwmod omap2430_uart3_hwmod;
 
 /* L4_CORE -> L4_WKUP interface */
 static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
@@ -79,9 +85,63 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* L4 CORE -> UART1 interface */
+static struct omap_hwmod_addr_space omap2430_uart1_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART1_BASE,
+		.pa_end		= OMAP2_UART1_BASE + SZ_8K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_uart1_hwmod,
+	.clk		= "uart1_ick",
+	.addr		= omap2430_uart1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_uart1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> UART2 interface */
+static struct omap_hwmod_addr_space omap2430_uart2_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART2_BASE,
+		.pa_end		= OMAP2_UART2_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_uart2_hwmod,
+	.clk		= "uart2_ick",
+	.addr		= omap2430_uart2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_uart2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART3 interface */
+static struct omap_hwmod_addr_space omap2430_uart3_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART3_BASE,
+		.pa_end		= OMAP2_UART3_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_uart3_hwmod,
+	.clk		= "uart3_ick",
+	.addr		= omap2430_uart3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_uart3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
-	&omap2430_l3__l4_core,
+	&omap2430_l3_main__l4_core,
 };
 
 /* Master interfaces on the L4_CORE interconnect */
@@ -91,18 +151,22 @@ static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
 
 /* L4 CORE */
 static struct omap_hwmod omap2430_l4_core_hwmod = {
-	.name		= "l4_core_hwmod",
+	.name		= "l4_core",
 	.class		= &l4_hwmod_class,
 	.masters	= omap2430_l4_core_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2430_l4_core_masters),
 	.slaves		= omap2430_l4_core_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_core_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Slave interfaces on the L4_WKUP interconnect */
 static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
 	&omap2430_l4_core__l4_wkup,
+	&omap2_l4_core__uart1,
+	&omap2_l4_core__uart2,
+	&omap2_l4_core__uart3,
 };
 
 /* Master interfaces on the L4_WKUP interconnect */
@@ -111,18 +175,19 @@ static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
 
 /* L4 WKUP */
 static struct omap_hwmod omap2430_l4_wkup_hwmod = {
-	.name		= "l4_wkup_hwmod",
+	.name		= "l4_wkup",
 	.class		= &l4_hwmod_class,
 	.masters	= omap2430_l4_wkup_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2430_l4_wkup_masters),
 	.slaves		= omap2430_l4_wkup_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_wkup_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Master interfaces on the MPU device */
 static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
-	&omap2430_mpu__l3,
+	&omap2430_mpu__l3_main,
 };
 
 /* MPU */
@@ -135,11 +200,234 @@ static struct omap_hwmod omap2430_mpu_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
+/*
+ * IVA2_1 interface data
+ */
+
+/* IVA2 <- L3 interface */
+static struct omap_hwmod_ocp_if omap2430_l3__iva = {
+	.master		= &omap2430_l3_main_hwmod,
+	.slave		= &omap2430_iva_hwmod,
+	.clk		= "dsp_fck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap2430_iva_masters[] = {
+	&omap2430_l3__iva,
+};
+
+/*
+ * IVA2 (IVA2)
+ */
+
+static struct omap_hwmod omap2430_iva_hwmod = {
+	.name		= "iva",
+	.class		= &iva_hwmod_class,
+	.masters	= omap2430_iva_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_iva_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = {
+	{
+		.pa_start	= 0x49016000,
+		.pa_end		= 0x4901607f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = {
+	.master		= &omap2430_l4_wkup_hwmod,
+	.slave		= &omap2430_wd_timer2_hwmod,
+	.clk		= "mpu_wdt_ick",
+	.addr		= omap2430_wd_timer2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap2430_wd_timer2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/*
+ * 'wd_timer' class
+ * 32-bit watchdog upward counter that generates a pulse on the reset pin on
+ * overflow condition
+ */
+
+static struct omap_hwmod_class_sysconfig omap2430_wd_timer_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2430_wd_timer_hwmod_class = {
+	.name = "wd_timer",
+	.sysc = &omap2430_wd_timer_sysc,
+};
+
+/* wd_timer2 */
+static struct omap_hwmod_ocp_if *omap2430_wd_timer2_slaves[] = {
+	&omap2430_l4_wkup__wd_timer2,
+};
+
+static struct omap_hwmod omap2430_wd_timer2_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &omap2430_wd_timer_hwmod_class,
+	.main_clk	= "mpu_wdt_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
+		},
+	},
+	.slaves		= omap2430_wd_timer2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_wd_timer2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* UART */
+
+static struct omap_hwmod_class_sysconfig uart_sysc = {
+	.rev_offs	= 0x50,
+	.sysc_offs	= 0x54,
+	.syss_offs	= 0x58,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class uart_class = {
+	.name = "uart",
+	.sysc = &uart_sysc,
+};
+
+/* UART1 */
+
+static struct omap_hwmod_irq_info uart1_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART1_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart1_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART1_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART1_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_uart1_slaves[] = {
+	&omap2_l4_core__uart1,
+};
+
+static struct omap_hwmod omap2430_uart1_hwmod = {
+	.name		= "uart1",
+	.mpu_irqs	= uart1_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart1_mpu_irqs),
+	.sdma_reqs	= uart1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart1_sdma_reqs),
+	.main_clk	= "uart1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_UART1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
+		},
+	},
+	.slaves		= omap2430_uart1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_uart1_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* UART2 */
+
+static struct omap_hwmod_irq_info uart2_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART2_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart2_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART2_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART2_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_uart2_slaves[] = {
+	&omap2_l4_core__uart2,
+};
+
+static struct omap_hwmod omap2430_uart2_hwmod = {
+	.name		= "uart2",
+	.mpu_irqs	= uart2_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart2_mpu_irqs),
+	.sdma_reqs	= uart2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart2_sdma_reqs),
+	.main_clk	= "uart2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_UART2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
+		},
+	},
+	.slaves		= omap2430_uart2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_uart2_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* UART3 */
+
+static struct omap_hwmod_irq_info uart3_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART3_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart3_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART3_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART3_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_uart3_slaves[] = {
+	&omap2_l4_core__uart3,
+};
+
+static struct omap_hwmod omap2430_uart3_hwmod = {
+	.name		= "uart3",
+	.mpu_irqs	= uart3_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart3_mpu_irqs),
+	.sdma_reqs	= uart3_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart3_sdma_reqs),
+	.main_clk	= "uart3_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 2,
+			.module_bit = OMAP24XX_EN_UART3_SHIFT,
+			.idlest_reg_id = 2,
+			.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
+		},
+	},
+	.slaves		= omap2430_uart3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_uart3_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
 static __initdata struct omap_hwmod *omap2430_hwmods[] = {
-	&omap2430_l3_hwmod,
+	&omap2430_l3_main_hwmod,
 	&omap2430_l4_core_hwmod,
 	&omap2430_l4_wkup_hwmod,
 	&omap2430_mpu_hwmod,
+	&omap2430_iva_hwmod,
+	&omap2430_wd_timer2_hwmod,
+	&omap2430_uart1_hwmod,
+	&omap2430_uart2_hwmod,
+	&omap2430_uart3_hwmod,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 39b0c0eaa37d..cb97ecf0a3f6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -17,10 +17,12 @@
 #include <mach/irqs.h>
 #include <plat/cpu.h>
 #include <plat/dma.h>
+#include <plat/serial.h>
 
 #include "omap_hwmod_common_data.h"
 
 #include "prm-regbits-34xx.h"
+#include "cm-regbits-34xx.h"
 
 /*
  * OMAP3xxx hardware module integration data
@@ -32,54 +34,61 @@
  */
 
 static struct omap_hwmod omap3xxx_mpu_hwmod;
-static struct omap_hwmod omap3xxx_l3_hwmod;
+static struct omap_hwmod omap3xxx_iva_hwmod;
+static struct omap_hwmod omap3xxx_l3_main_hwmod;
 static struct omap_hwmod omap3xxx_l4_core_hwmod;
 static struct omap_hwmod omap3xxx_l4_per_hwmod;
+static struct omap_hwmod omap3xxx_wd_timer2_hwmod;
 
 /* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3__l4_core = {
-	.master	= &omap3xxx_l3_hwmod,
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
+	.master	= &omap3xxx_l3_main_hwmod,
 	.slave	= &omap3xxx_l4_core_hwmod,
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* L3 -> L4_PER interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3__l4_per = {
-	.master = &omap3xxx_l3_hwmod,
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = {
+	.master = &omap3xxx_l3_main_hwmod,
 	.slave	= &omap3xxx_l4_per_hwmod,
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap3xxx_mpu__l3 = {
+static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
 	.master = &omap3xxx_mpu_hwmod,
-	.slave	= &omap3xxx_l3_hwmod,
+	.slave	= &omap3xxx_l3_main_hwmod,
 	.user	= OCP_USER_MPU,
 };
 
 /* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l3_slaves[] = {
-	&omap3xxx_mpu__l3,
+static struct omap_hwmod_ocp_if *omap3xxx_l3_main_slaves[] = {
+	&omap3xxx_mpu__l3_main,
 };
 
 /* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l3_masters[] = {
-	&omap3xxx_l3__l4_core,
-	&omap3xxx_l3__l4_per,
+static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = {
+	&omap3xxx_l3_main__l4_core,
+	&omap3xxx_l3_main__l4_per,
 };
 
 /* L3 */
-static struct omap_hwmod omap3xxx_l3_hwmod = {
-	.name		= "l3_hwmod",
+static struct omap_hwmod omap3xxx_l3_main_hwmod = {
+	.name		= "l3_main",
 	.class		= &l3_hwmod_class,
-	.masters	= omap3xxx_l3_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_l3_masters),
-	.slaves		= omap3xxx_l3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l3_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	.masters	= omap3xxx_l3_main_masters,
+	.masters_cnt	= ARRAY_SIZE(omap3xxx_l3_main_masters),
+	.slaves		= omap3xxx_l3_main_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l3_main_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 static struct omap_hwmod omap3xxx_l4_wkup_hwmod;
+static struct omap_hwmod omap3xxx_uart1_hwmod;
+static struct omap_hwmod omap3xxx_uart2_hwmod;
+static struct omap_hwmod omap3xxx_uart3_hwmod;
+static struct omap_hwmod omap3xxx_uart4_hwmod;
 
 /* L4_CORE -> L4_WKUP interface */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
@@ -88,45 +97,123 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* L4 CORE -> UART1 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART1_BASE,
+		.pa_end		= OMAP3_UART1_BASE + SZ_8K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_uart1_hwmod,
+	.clk		= "uart1_ick",
+	.addr		= omap3xxx_uart1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_uart1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> UART2 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART2_BASE,
+		.pa_end		= OMAP3_UART2_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_uart2_hwmod,
+	.clk		= "uart2_ick",
+	.addr		= omap3xxx_uart2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_uart2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART3 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART3_BASE,
+		.pa_end		= OMAP3_UART3_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_uart3_hwmod,
+	.clk		= "uart3_ick",
+	.addr		= omap3xxx_uart3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_uart3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART4 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart4_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART4_BASE,
+		.pa_end		= OMAP3_UART4_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_uart4_hwmod,
+	.clk		= "uart4_ick",
+	.addr		= omap3xxx_uart4_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_uart4_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
-	&omap3xxx_l3__l4_core,
+	&omap3xxx_l3_main__l4_core,
 };
 
 /* Master interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = {
 	&omap3xxx_l4_core__l4_wkup,
+	&omap3_l4_core__uart1,
+	&omap3_l4_core__uart2,
 };
 
 /* L4 CORE */
 static struct omap_hwmod omap3xxx_l4_core_hwmod = {
-	.name		= "l4_core_hwmod",
+	.name		= "l4_core",
 	.class		= &l4_hwmod_class,
 	.masters	= omap3xxx_l4_core_masters,
 	.masters_cnt	= ARRAY_SIZE(omap3xxx_l4_core_masters),
 	.slaves		= omap3xxx_l4_core_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_core_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Slave interfaces on the L4_PER interconnect */
 static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = {
-	&omap3xxx_l3__l4_per,
+	&omap3xxx_l3_main__l4_per,
 };
 
 /* Master interfaces on the L4_PER interconnect */
 static struct omap_hwmod_ocp_if *omap3xxx_l4_per_masters[] = {
+	&omap3_l4_per__uart3,
+	&omap3_l4_per__uart4,
 };
 
 /* L4 PER */
 static struct omap_hwmod omap3xxx_l4_per_hwmod = {
-	.name		= "l4_per_hwmod",
+	.name		= "l4_per",
 	.class		= &l4_hwmod_class,
 	.masters	= omap3xxx_l4_per_masters,
 	.masters_cnt	= ARRAY_SIZE(omap3xxx_l4_per_masters),
 	.slaves		= omap3xxx_l4_per_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_per_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Slave interfaces on the L4_WKUP interconnect */
@@ -140,18 +227,19 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_masters[] = {
 
 /* L4 WKUP */
 static struct omap_hwmod omap3xxx_l4_wkup_hwmod = {
-	.name		= "l4_wkup_hwmod",
+	.name		= "l4_wkup",
 	.class		= &l4_hwmod_class,
 	.masters	= omap3xxx_l4_wkup_masters,
 	.masters_cnt	= ARRAY_SIZE(omap3xxx_l4_wkup_masters),
 	.slaves		= omap3xxx_l4_wkup_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Master interfaces on the MPU device */
 static struct omap_hwmod_ocp_if *omap3xxx_mpu_masters[] = {
-	&omap3xxx_mpu__l3,
+	&omap3xxx_mpu__l3_main,
 };
 
 /* MPU */
@@ -164,12 +252,275 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
+/*
+ * IVA2_2 interface data
+ */
+
+/* IVA2 <- L3 interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
+	.master		= &omap3xxx_l3_main_hwmod,
+	.slave		= &omap3xxx_iva_hwmod,
+	.clk		= "iva2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_iva_masters[] = {
+	&omap3xxx_l3__iva,
+};
+
+/*
+ * IVA2 (IVA2)
+ */
+
+static struct omap_hwmod omap3xxx_iva_hwmod = {
+	.name		= "iva",
+	.class		= &iva_hwmod_class,
+	.masters	= omap3xxx_iva_masters,
+	.masters_cnt	= ARRAY_SIZE(omap3xxx_iva_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = {
+	{
+		.pa_start	= 0x48314000,
+		.pa_end		= 0x4831407f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = {
+	.master		= &omap3xxx_l4_wkup_hwmod,
+	.slave		= &omap3xxx_wd_timer2_hwmod,
+	.clk		= "wdt2_ick",
+	.addr		= omap3xxx_wd_timer2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_wd_timer2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/*
+ * 'wd_timer' class
+ * 32-bit watchdog upward counter that generates a pulse on the reset pin on
+ * overflow condition
+ */
+
+static struct omap_hwmod_class_sysconfig omap3xxx_wd_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = {
+	.name = "wd_timer",
+	.sysc = &omap3xxx_wd_timer_sysc,
+};
+
+/* wd_timer2 */
+static struct omap_hwmod_ocp_if *omap3xxx_wd_timer2_slaves[] = {
+	&omap3xxx_l4_wkup__wd_timer2,
+};
+
+static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &omap3xxx_wd_timer_hwmod_class,
+	.main_clk	= "wdt2_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_WDT2_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_WDT2_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_wd_timer2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_wd_timer2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* UART common */
+
+static struct omap_hwmod_class_sysconfig uart_sysc = {
+	.rev_offs	= 0x50,
+	.sysc_offs	= 0x54,
+	.syss_offs	= 0x58,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class uart_class = {
+	.name = "uart",
+	.sysc = &uart_sysc,
+};
+
+/* UART1 */
+
+static struct omap_hwmod_irq_info uart1_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART1_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart1_sdma_reqs[] = {
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART1_TX, },
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART1_RX, },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_uart1_slaves[] = {
+	&omap3_l4_core__uart1,
+};
+
+static struct omap_hwmod omap3xxx_uart1_hwmod = {
+	.name		= "uart1",
+	.mpu_irqs	= uart1_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart1_mpu_irqs),
+	.sdma_reqs	= uart1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart1_sdma_reqs),
+	.main_clk	= "uart1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_UART1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_UART1_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_uart1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart1_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* UART2 */
+
+static struct omap_hwmod_irq_info uart2_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART2_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart2_sdma_reqs[] = {
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART2_TX, },
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART2_RX, },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_uart2_slaves[] = {
+	&omap3_l4_core__uart2,
+};
+
+static struct omap_hwmod omap3xxx_uart2_hwmod = {
+	.name		= "uart2",
+	.mpu_irqs	= uart2_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart2_mpu_irqs),
+	.sdma_reqs	= uart2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart2_sdma_reqs),
+	.main_clk	= "uart2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_UART2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_UART2_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_uart2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart2_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* UART3 */
+
+static struct omap_hwmod_irq_info uart3_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART3_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart3_sdma_reqs[] = {
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART3_TX, },
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART3_RX, },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_uart3_slaves[] = {
+	&omap3_l4_per__uart3,
+};
+
+static struct omap_hwmod omap3xxx_uart3_hwmod = {
+	.name		= "uart3",
+	.mpu_irqs	= uart3_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart3_mpu_irqs),
+	.sdma_reqs	= uart3_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart3_sdma_reqs),
+	.main_clk	= "uart3_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = OMAP3430_PER_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_UART3_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_UART3_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_uart3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart3_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* UART4 */
+
+static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
+	{ .irq = INT_36XX_UART4_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP36XX_DMA_UART4_RX, },
+	{ .name = "tx",	.dma_req = OMAP36XX_DMA_UART4_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_uart4_slaves[] = {
+	&omap3_l4_per__uart4,
+};
+
+static struct omap_hwmod omap3xxx_uart4_hwmod = {
+	.name		= "uart4",
+	.mpu_irqs	= uart4_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart4_mpu_irqs),
+	.sdma_reqs	= uart4_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart4_sdma_reqs),
+	.main_clk	= "uart4_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = OMAP3430_PER_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3630_EN_UART4_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3630_EN_UART4_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_uart4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart4_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
+};
+
 static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
-	&omap3xxx_l3_hwmod,
+	&omap3xxx_l3_main_hwmod,
 	&omap3xxx_l4_core_hwmod,
 	&omap3xxx_l4_per_hwmod,
 	&omap3xxx_l4_wkup_hwmod,
 	&omap3xxx_mpu_hwmod,
+	&omap3xxx_iva_hwmod,
+	&omap3xxx_wd_timer2_hwmod,
+	&omap3xxx_uart1_hwmod,
+	&omap3xxx_uart2_hwmod,
+	&omap3xxx_uart3_hwmod,
+	&omap3xxx_uart4_hwmod,
 	NULL,
 };
 
@@ -177,5 +528,3 @@ int __init omap3xxx_hwmod_init(void)
 {
 	return omap_hwmod_init(omap3xxx_hwmods);
 }
-
-
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
new file mode 100644
index 000000000000..7274db4de487
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -0,0 +1,850 @@
+/*
+ * Hardware modules present on the OMAP44xx chips
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ * Benoit Cousson
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/cpu.h>
+
+#include "omap_hwmod_common_data.h"
+
+#include "cm.h"
+#include "prm-regbits-44xx.h"
+
+/* Base offset for all OMAP4 interrupts external to MPUSS */
+#define OMAP44XX_IRQ_GIC_START	32
+
+/* Base offset for all OMAP4 dma requests */
+#define OMAP44XX_DMA_REQ_START  1
+
+/* Backward references (IPs with Bus Master capability) */
+static struct omap_hwmod omap44xx_dmm_hwmod;
+static struct omap_hwmod omap44xx_emif_fw_hwmod;
+static struct omap_hwmod omap44xx_l3_instr_hwmod;
+static struct omap_hwmod omap44xx_l3_main_1_hwmod;
+static struct omap_hwmod omap44xx_l3_main_2_hwmod;
+static struct omap_hwmod omap44xx_l3_main_3_hwmod;
+static struct omap_hwmod omap44xx_l4_abe_hwmod;
+static struct omap_hwmod omap44xx_l4_cfg_hwmod;
+static struct omap_hwmod omap44xx_l4_per_hwmod;
+static struct omap_hwmod omap44xx_l4_wkup_hwmod;
+static struct omap_hwmod omap44xx_mpu_hwmod;
+static struct omap_hwmod omap44xx_mpu_private_hwmod;
+
+/*
+ * Interconnects omap_hwmod structures
+ * hwmods that compose the global OMAP interconnect
+ */
+
+/*
+ * 'dmm' class
+ * instance(s): dmm
+ */
+static struct omap_hwmod_class omap44xx_dmm_hwmod_class = {
+	.name = "dmm",
+};
+
+/* dmm interface data */
+/* l3_main_1 -> dmm */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_dmm_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> dmm */
+static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_dmm_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dmm slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_dmm_slaves[] = {
+	&omap44xx_l3_main_1__dmm,
+	&omap44xx_mpu__dmm,
+};
+
+static struct omap_hwmod_irq_info omap44xx_dmm_irqs[] = {
+	{ .irq = 113 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod omap44xx_dmm_hwmod = {
+	.name		= "dmm",
+	.class		= &omap44xx_dmm_hwmod_class,
+	.slaves		= omap44xx_dmm_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_dmm_slaves),
+	.mpu_irqs	= omap44xx_dmm_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_dmm_irqs),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'emif_fw' class
+ * instance(s): emif_fw
+ */
+static struct omap_hwmod_class omap44xx_emif_fw_hwmod_class = {
+	.name = "emif_fw",
+};
+
+/* emif_fw interface data */
+/* dmm -> emif_fw */
+static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = {
+	.master		= &omap44xx_dmm_hwmod,
+	.slave		= &omap44xx_emif_fw_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> emif_fw */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_emif_fw_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* emif_fw slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_emif_fw_slaves[] = {
+	&omap44xx_dmm__emif_fw,
+	&omap44xx_l4_cfg__emif_fw,
+};
+
+static struct omap_hwmod omap44xx_emif_fw_hwmod = {
+	.name		= "emif_fw",
+	.class		= &omap44xx_emif_fw_hwmod_class,
+	.slaves		= omap44xx_emif_fw_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_emif_fw_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'l3' class
+ * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3
+ */
+static struct omap_hwmod_class omap44xx_l3_hwmod_class = {
+	.name = "l3",
+};
+
+/* l3_instr interface data */
+/* l3_main_3 -> l3_instr */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
+	.master		= &omap44xx_l3_main_3_hwmod,
+	.slave		= &omap44xx_l3_instr_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_instr slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = {
+	&omap44xx_l3_main_3__l3_instr,
+};
+
+static struct omap_hwmod omap44xx_l3_instr_hwmod = {
+	.name		= "l3_instr",
+	.class		= &omap44xx_l3_hwmod_class,
+	.slaves		= omap44xx_l3_instr_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_instr_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l3_main_2 -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = {
+	&omap44xx_l3_main_2__l3_main_1,
+	&omap44xx_l4_cfg__l3_main_1,
+	&omap44xx_mpu__l3_main_1,
+};
+
+static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
+	.name		= "l3_main_1",
+	.class		= &omap44xx_l3_hwmod_class,
+	.slaves		= omap44xx_l3_main_1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l3_main_2 interface data */
+/* l3_main_1 -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = {
+	&omap44xx_l3_main_1__l3_main_2,
+	&omap44xx_l4_cfg__l3_main_2,
+};
+
+static struct omap_hwmod omap44xx_l3_main_2_hwmod = {
+	.name		= "l3_main_2",
+	.class		= &omap44xx_l3_hwmod_class,
+	.slaves		= omap44xx_l3_main_2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l3_main_3 interface data */
+/* l3_main_1 -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l3_main_3_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_l3_main_3_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l3_main_3_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l3_main_3_slaves[] = {
+	&omap44xx_l3_main_1__l3_main_3,
+	&omap44xx_l3_main_2__l3_main_3,
+	&omap44xx_l4_cfg__l3_main_3,
+};
+
+static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
+	.name		= "l3_main_3",
+	.class		= &omap44xx_l3_hwmod_class,
+	.slaves		= omap44xx_l3_main_3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l3_main_3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'l4' class
+ * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup
+ */
+static struct omap_hwmod_class omap44xx_l4_hwmod_class = {
+	.name = "l4",
+};
+
+/* l4_abe interface data */
+/* l3_main_1 -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l4_abe_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_l4_abe_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_abe slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = {
+	&omap44xx_l3_main_1__l4_abe,
+	&omap44xx_mpu__l4_abe,
+};
+
+static struct omap_hwmod omap44xx_l4_abe_hwmod = {
+	.name		= "l4_abe",
+	.class		= &omap44xx_l4_hwmod_class,
+	.slaves		= omap44xx_l4_abe_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_abe_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l4_cfg interface data */
+/* l3_main_1 -> l4_cfg */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = {
+	.master		= &omap44xx_l3_main_1_hwmod,
+	.slave		= &omap44xx_l4_cfg_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_cfg_slaves[] = {
+	&omap44xx_l3_main_1__l4_cfg,
+};
+
+static struct omap_hwmod omap44xx_l4_cfg_hwmod = {
+	.name		= "l4_cfg",
+	.class		= &omap44xx_l4_hwmod_class,
+	.slaves		= omap44xx_l4_cfg_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_cfg_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l4_per interface data */
+/* l3_main_2 -> l4_per */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_l4_per_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_per_slaves[] = {
+	&omap44xx_l3_main_2__l4_per,
+};
+
+static struct omap_hwmod omap44xx_l4_per_hwmod = {
+	.name		= "l4_per",
+	.class		= &omap44xx_l4_hwmod_class,
+	.slaves		= omap44xx_l4_per_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_per_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l4_wkup interface data */
+/* l4_cfg -> l4_wkup */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_l4_wkup_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_l4_wkup_slaves[] = {
+	&omap44xx_l4_cfg__l4_wkup,
+};
+
+static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
+	.name		= "l4_wkup",
+	.class		= &omap44xx_l4_hwmod_class,
+	.slaves		= omap44xx_l4_wkup_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_l4_wkup_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'mpu_bus' class
+ * instance(s): mpu_private
+ */
+static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = {
+	.name = "mpu_bus",
+};
+
+/* mpu_private interface data */
+/* mpu -> mpu_private */
+static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = {
+	.master		= &omap44xx_mpu_hwmod,
+	.slave		= &omap44xx_mpu_private_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu_private slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_mpu_private_slaves[] = {
+	&omap44xx_mpu__mpu_private,
+};
+
+static struct omap_hwmod omap44xx_mpu_private_hwmod = {
+	.name		= "mpu_private",
+	.class		= &omap44xx_mpu_bus_hwmod_class,
+	.slaves		= omap44xx_mpu_private_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_mpu_private_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'mpu' class
+ * mpu sub-system
+ */
+
+static struct omap_hwmod_class omap44xx_mpu_hwmod_class = {
+	.name = "mpu",
+};
+
+/* mpu */
+static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = {
+	{ .name = "pl310", .irq = 0 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START },
+};
+
+/* mpu master ports */
+static struct omap_hwmod_ocp_if *omap44xx_mpu_masters[] = {
+	&omap44xx_mpu__l3_main_1,
+	&omap44xx_mpu__l4_abe,
+	&omap44xx_mpu__dmm,
+};
+
+static struct omap_hwmod omap44xx_mpu_hwmod = {
+	.name		= "mpu",
+	.class		= &omap44xx_mpu_hwmod_class,
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.mpu_irqs	= omap44xx_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_mpu_irqs),
+	.main_clk	= "dpll_mpu_m2_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_MPU_MPU_CLKCTRL,
+		},
+	},
+	.masters	= omap44xx_mpu_masters,
+	.masters_cnt	= ARRAY_SIZE(omap44xx_mpu_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'wd_timer' class
+ * 32-bit watchdog upward counter that generates a pulse on the reset pin on
+ * overflow condition
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+/*
+ * 'uart' class
+ * universal asynchronous receiver/transmitter (uart)
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = {
+	.rev_offs	= 0x0050,
+	.sysc_offs	= 0x0054,
+	.syss_offs	= 0x0058,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
+	.name = "wd_timer",
+	.sysc = &omap44xx_wd_timer_sysc,
+};
+
+/* wd_timer2 */
+static struct omap_hwmod omap44xx_wd_timer2_hwmod;
+static struct omap_hwmod_irq_info omap44xx_wd_timer2_irqs[] = {
+	{ .irq = 80 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = {
+	{
+		.pa_start	= 0x4a314000,
+		.pa_end		= 0x4a31407f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_class omap44xx_uart_hwmod_class = {
+	.name = "uart",
+	.sysc = &omap44xx_uart_sysc,
+};
+
+/* uart1 */
+static struct omap_hwmod omap44xx_uart1_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart1_irqs[] = {
+	{ .irq = 72 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart1_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 48 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 49 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = {
+	{
+		.pa_start	= 0x4806a000,
+		.pa_end		= 0x4806a0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> uart1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart1_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart1_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart1_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart1 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = {
+	&omap44xx_l4_per__uart1,
+};
+
+static struct omap_hwmod omap44xx_uart1_hwmod = {
+	.name		= "uart1",
+	.class		= &omap44xx_uart_hwmod_class,
+	.mpu_irqs	= omap44xx_uart1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart1_irqs),
+	.sdma_reqs	= omap44xx_uart1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart1_sdma_reqs),
+	.main_clk	= "uart1_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* uart2 */
+static struct omap_hwmod omap44xx_uart2_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart2_irqs[] = {
+	{ .irq = 73 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart2_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 50 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 51 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = {
+	{
+		.pa_start	= 0x4806c000,
+		.pa_end		= 0x4806c0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_wd_timer2_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_wd_timer2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_wd_timer2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* wd_timer2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_wd_timer2_slaves[] = {
+	&omap44xx_l4_wkup__wd_timer2,
+};
+
+static struct omap_hwmod omap44xx_wd_timer2_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &omap44xx_wd_timer_hwmod_class,
+	.mpu_irqs	= omap44xx_wd_timer2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_wd_timer2_irqs),
+	.main_clk	= "wd_timer2_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_wd_timer2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* wd_timer3 */
+static struct omap_hwmod omap44xx_wd_timer3_hwmod;
+static struct omap_hwmod_irq_info omap44xx_wd_timer3_irqs[] = {
+	{ .irq = 36 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = {
+	{
+		.pa_start	= 0x40130000,
+		.pa_end		= 0x4013007f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> uart2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = {
+	&omap44xx_l4_per__uart2,
+};
+
+static struct omap_hwmod omap44xx_uart2_hwmod = {
+	.name		= "uart2",
+	.class		= &omap44xx_uart_hwmod_class,
+	.mpu_irqs	= omap44xx_uart2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart2_irqs),
+	.sdma_reqs	= omap44xx_uart2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart2_sdma_reqs),
+	.main_clk	= "uart2_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* uart3 */
+static struct omap_hwmod omap44xx_uart3_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart3_irqs[] = {
+	{ .irq = 74 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart3_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 52 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 53 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = {
+	{
+		.pa_start	= 0x48020000,
+		.pa_end		= 0x480200ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_abe -> wd_timer3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_wd_timer3_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_wd_timer3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_addrs),
+	.user		= OCP_USER_MPU,
+};
+
+/* l4_abe -> wd_timer3 (dma) */
+static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = {
+	{
+		.pa_start	= 0x49030000,
+		.pa_end		= 0x4903007f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> uart3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart3_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart3_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = {
+	&omap44xx_l4_per__uart3,
+};
+
+static struct omap_hwmod omap44xx_uart3_hwmod = {
+	.name		= "uart3",
+	.class		= &omap44xx_uart_hwmod_class,
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.mpu_irqs	= omap44xx_uart3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart3_irqs),
+	.sdma_reqs	= omap44xx_uart3_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart3_sdma_reqs),
+	.main_clk	= "uart3_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* uart4 */
+static struct omap_hwmod omap44xx_uart4_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart4_irqs[] = {
+	{ .irq = 70 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart4_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 54 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 55 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = {
+	{
+		.pa_start	= 0x4806e000,
+		.pa_end		= 0x4806e0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_wd_timer3_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_wd_timer3_dma_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_dma_addrs),
+	.user		= OCP_USER_SDMA,
+};
+
+/* wd_timer3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_wd_timer3_slaves[] = {
+	&omap44xx_l4_abe__wd_timer3,
+	&omap44xx_l4_abe__wd_timer3_dma,
+};
+
+static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
+	.name		= "wd_timer3",
+	.class		= &omap44xx_wd_timer_hwmod_class,
+	.mpu_irqs	= omap44xx_wd_timer3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_irqs),
+	.main_clk	= "wd_timer3_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_wd_timer3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* l4_per -> uart4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart4_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart4_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart4 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = {
+	&omap44xx_l4_per__uart4,
+};
+
+static struct omap_hwmod omap44xx_uart4_hwmod = {
+	.name		= "uart4",
+	.class		= &omap44xx_uart_hwmod_class,
+	.mpu_irqs	= omap44xx_uart4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart4_irqs),
+	.sdma_reqs	= omap44xx_uart4_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart4_sdma_reqs),
+	.main_clk	= "uart4_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart4_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
+	/* dmm class */
+	&omap44xx_dmm_hwmod,
+	/* emif_fw class */
+	&omap44xx_emif_fw_hwmod,
+	/* l3 class */
+	&omap44xx_l3_instr_hwmod,
+	&omap44xx_l3_main_1_hwmod,
+	&omap44xx_l3_main_2_hwmod,
+	&omap44xx_l3_main_3_hwmod,
+	/* l4 class */
+	&omap44xx_l4_abe_hwmod,
+	&omap44xx_l4_cfg_hwmod,
+	&omap44xx_l4_per_hwmod,
+	&omap44xx_l4_wkup_hwmod,
+	/* mpu_bus class */
+	&omap44xx_mpu_private_hwmod,
+
+	/* mpu class */
+	&omap44xx_mpu_hwmod,
+	/* wd_timer class */
+	&omap44xx_wd_timer2_hwmod,
+	&omap44xx_wd_timer3_hwmod,
+
+	/* uart class */
+	&omap44xx_uart1_hwmod,
+	&omap44xx_uart2_hwmod,
+	&omap44xx_uart3_hwmod,
+	&omap44xx_uart4_hwmod,
+	NULL,
+};
+
+int __init omap44xx_hwmod_init(void)
+{
+	return omap_hwmod_init(omap44xx_hwmods);
+}
+
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index 1e80b914fa1a..08a134243ecb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -66,3 +66,6 @@ struct omap_hwmod_class mpu_hwmod_class = {
 	.name = "mpu"
 };
 
+struct omap_hwmod_class iva_hwmod_class = {
+	.name = "iva"
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 3645a28c7c27..c34e98bf1242 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -20,5 +20,6 @@
 extern struct omap_hwmod_class l3_hwmod_class;
 extern struct omap_hwmod_class l4_hwmod_class;
 extern struct omap_hwmod_class mpu_hwmod_class;
+extern struct omap_hwmod_class iva_hwmod_class;
 
 #endif
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 723b44e252fd..5e81517a7af2 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -31,12 +31,17 @@
 #include <plat/board.h>
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
+#include <plat/dmtimer.h>
 
 #include "prm.h"
 #include "cm.h"
 #include "pm.h"
 
 int omap2_pm_debug;
+u32 enable_off_mode;
+u32 sleep_while_idle;
+u32 wakeup_timer_seconds;
+u32 wakeup_timer_milliseconds;
 
 #define DUMP_PRM_MOD_REG(mod, reg)    \
 	regs[reg_count].name = #mod "." #reg; \
@@ -162,7 +167,7 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 
 static void pm_dbg_regset_store(u32 *ptr);
 
-struct dentry *pm_dbg_dir;
+static struct dentry *pm_dbg_dir;
 
 static int pm_dbg_init_done;
 
@@ -349,6 +354,23 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
 	pwrdm->timer = t;
 }
 
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+	u32 tick_rate, cycles;
+
+	if (!seconds && !milliseconds)
+		return;
+
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+	omap_dm_timer_stop(gptimer_wakeup);
+	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+	pr_info("PM: Resume timer in %u.%03u secs"
+		" (%d ticks at %d ticks/sec.)\n",
+		seconds, milliseconds, cycles, tick_rate);
+}
+
 static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
 {
 	struct seq_file *s = (struct seq_file *)user;
@@ -494,8 +516,10 @@ int pm_dbg_regset_init(int reg_set)
 
 static int pwrdm_suspend_get(void *data, u64 *val)
 {
-	int ret;
-	ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
+	int ret = -EINVAL;
+
+	if (cpu_is_omap34xx())
+		ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
 	*val = ret;
 
 	if (ret >= 0)
@@ -505,7 +529,10 @@ static int pwrdm_suspend_get(void *data, u64 *val)
 
 static int pwrdm_suspend_set(void *data, u64 val)
 {
-	return omap3_pm_set_suspend_state((struct powerdomain *)data, (int)val);
+	if (cpu_is_omap34xx())
+		return omap3_pm_set_suspend_state(
+			(struct powerdomain *)data, (int)val);
+	return -EINVAL;
 }
 
 DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
@@ -553,8 +580,10 @@ static int option_set(void *data, u64 val)
 
 	*option = val;
 
-	if (option == &enable_off_mode)
-		omap3_pm_off_mode_enable(val);
+	if (option == &enable_off_mode) {
+		if (cpu_is_omap34xx())
+			omap3_pm_off_mode_enable(val);
+	}
 
 	return 0;
 }
@@ -609,6 +638,9 @@ static int __init pm_dbg_init(void)
 				   &sleep_while_idle, &pm_dbg_option_fops);
 	(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
 				   &wakeup_timer_seconds, &pm_dbg_option_fops);
+	(void) debugfs_create_file("wakeup_timer_milliseconds",
+			S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds,
+			&pm_dbg_option_fops);
 	pm_dbg_init_done = 1;
 
 	return 0;
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
new file mode 100644
index 000000000000..59ca03b0e691
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.c
@@ -0,0 +1,147 @@
+/*
+ * pm.c - Common OMAP2+ power management-related code
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include <plat/omap-pm.h>
+#include <plat/omap_device.h>
+#include <plat/common.h>
+
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
+
+static struct omap_device_pm_latency *pm_lats;
+
+static struct device *mpu_dev;
+static struct device *iva_dev;
+static struct device *l3_dev;
+static struct device *dsp_dev;
+
+struct device *omap2_get_mpuss_device(void)
+{
+	WARN_ON_ONCE(!mpu_dev);
+	return mpu_dev;
+}
+
+struct device *omap2_get_iva_device(void)
+{
+	WARN_ON_ONCE(!iva_dev);
+	return iva_dev;
+}
+
+struct device *omap2_get_l3_device(void)
+{
+	WARN_ON_ONCE(!l3_dev);
+	return l3_dev;
+}
+
+struct device *omap4_get_dsp_device(void)
+{
+	WARN_ON_ONCE(!dsp_dev);
+	return dsp_dev;
+}
+EXPORT_SYMBOL(omap4_get_dsp_device);
+
+/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
+static int _init_omap_device(char *name, struct device **new_dev)
+{
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+
+	oh = omap_hwmod_lookup(name);
+	if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
+		 __func__, name))
+		return -ENODEV;
+
+	od = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
+	if (WARN(IS_ERR(od), "%s: could not build omap_device for %s\n",
+		 __func__, name))
+		return -ENODEV;
+
+	*new_dev = &od->pdev.dev;
+
+	return 0;
+}
+
+/*
+ * Build omap_devices for processors and bus.
+ */
+static void omap2_init_processor_devices(void)
+{
+	_init_omap_device("mpu", &mpu_dev);
+	_init_omap_device("iva", &iva_dev);
+	if (cpu_is_omap44xx()) {
+		_init_omap_device("l3_main_1", &l3_dev);
+		_init_omap_device("dsp", &dsp_dev);
+	} else {
+		_init_omap_device("l3_main", &l3_dev);
+	}
+}
+
+/*
+ * This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled.
+ */
+int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+	u32 cur_state;
+	int sleep_switch = 0;
+	int ret = 0;
+
+	if (pwrdm == NULL || IS_ERR(pwrdm))
+		return -EINVAL;
+
+	while (!(pwrdm->pwrsts & (1 << state))) {
+		if (state == PWRDM_POWER_OFF)
+			return ret;
+		state--;
+	}
+
+	cur_state = pwrdm_read_next_pwrst(pwrdm);
+	if (cur_state == state)
+		return ret;
+
+	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+		sleep_switch = 1;
+		pwrdm_wait_transition(pwrdm);
+	}
+
+	ret = pwrdm_set_next_pwrst(pwrdm, state);
+	if (ret) {
+		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+		       pwrdm->name);
+		goto err;
+	}
+
+	if (sleep_switch) {
+		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+		pwrdm_wait_transition(pwrdm);
+		pwrdm_state_switch(pwrdm);
+	}
+
+err:
+	return ret;
+}
+
+static int __init omap2_common_pm_init(void)
+{
+	omap2_init_processor_devices();
+	omap_pm_if_init();
+
+	return 0;
+}
+device_initcall(omap2_common_pm_init);
+
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 3de6ece23fc8..0d75bfd1fdbe 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -13,14 +13,11 @@
 
 #include <plat/powerdomain.h>
 
-extern u32 enable_off_mode;
-extern u32 sleep_while_idle;
-
 extern void *omap3_secure_ram_storage;
 extern void omap3_pm_off_mode_enable(int);
 extern void omap_sram_idle(void);
 extern int omap3_can_sleep(void);
-extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
+extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
 extern int omap3_idle_init(void);
 
 struct cpuidle_params {
@@ -48,10 +45,16 @@ extern struct omap_dm_timer *gptimer_wakeup;
 
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds);
 extern int omap2_pm_debug;
+extern u32 enable_off_mode;
+extern u32 sleep_while_idle;
 #else
 #define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_wakeup_on_timer(seconds, milliseconds)	do {} while (0);
 #define omap2_pm_debug				0
+#define enable_off_mode 0
+#define sleep_while_idle 0
 #endif
 
 #if defined(CONFIG_CPU_IDLE)
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index e321281ab6e1..a40457d81927 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -38,8 +38,6 @@
 #include <mach/irqs.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
-#include <plat/control.h>
-#include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/board.h>
 
@@ -49,6 +47,7 @@
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 #include "pm.h"
+#include "control.h"
 
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
@@ -246,6 +245,8 @@ static int omap2_can_sleep(void)
 {
 	if (omap2_fclks_active())
 		return 0;
+	if (!omap_uart_can_sleep())
+		return 0;
 	if (osc_ck->usecount > 1)
 		return 0;
 	if (omap_dma_running())
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index b88737fd6cfe..75c0cd13ad8e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -32,13 +32,11 @@
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
 #include <plat/powerdomain.h>
-#include <plat/control.h>
 #include <plat/serial.h>
 #include <plat/sdrc.h>
 #include <plat/prcm.h>
 #include <plat/gpmc.h>
 #include <plat/dma.h>
-#include <plat/dmtimer.h>
 
 #include <asm/tlbflush.h>
 
@@ -49,16 +47,12 @@
 #include "prm.h"
 #include "pm.h"
 #include "sdrc.h"
+#include "control.h"
 
 /* Scratchpad offsets */
-#define OMAP343X_TABLE_ADDRESS_OFFSET	   0x31
-#define OMAP343X_TABLE_VALUE_OFFSET	   0x30
-#define OMAP343X_CONTROL_REG_VALUE_OFFSET  0x32
-
-u32 enable_off_mode;
-u32 sleep_while_idle;
-u32 wakeup_timer_seconds;
-u32 wakeup_timer_milliseconds;
+#define OMAP343X_TABLE_ADDRESS_OFFSET	   0xc4
+#define OMAP343X_TABLE_VALUE_OFFSET	   0xc0
+#define OMAP343X_CONTROL_REG_VALUE_OFFSET  0xc8
 
 struct power_state {
 	struct powerdomain *pwrdm;
@@ -316,7 +310,7 @@ static void restore_control_register(u32 val)
 /* Function to restore the table entry that was modified for enabling MMU */
 static void restore_table_entry(void)
 {
-	u32 *scratchpad_address;
+	void __iomem *scratchpad_address;
 	u32 previous_value, control_reg_value;
 	u32 *address;
 
@@ -351,7 +345,6 @@ void omap_sram_idle(void)
 	int core_next_state = PWRDM_POWER_ON;
 	int core_prev_state, per_prev_state;
 	u32 sdrc_pwr = 0;
-	int per_state_modified = 0;
 
 	if (!_omap_sram_idle)
 		return;
@@ -385,8 +378,9 @@ void omap_sram_idle(void)
 	/* Enable IO-PAD and IO-CHAIN wakeups */
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
-	if (per_next_state < PWRDM_POWER_ON ||
-			core_next_state < PWRDM_POWER_ON) {
+	if (omap3_has_io_wakeup() &&
+	    (per_next_state < PWRDM_POWER_ON ||
+	     core_next_state < PWRDM_POWER_ON)) {
 		prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
 		omap3_enable_io_chain();
 	}
@@ -394,20 +388,12 @@ void omap_sram_idle(void)
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
+		omap_uart_prepare_idle(3);
 		omap2_gpio_prepare_for_idle(per_next_state);
-		if (per_next_state == PWRDM_POWER_OFF) {
-			if (core_next_state == PWRDM_POWER_ON) {
-				per_next_state = PWRDM_POWER_RET;
-				pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
-				per_state_modified = 1;
-			} else
+		if (per_next_state == PWRDM_POWER_OFF)
 				omap3_per_save_context();
-		}
 	}
 
-	if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON)
-		omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]);
-
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(0);
@@ -474,12 +460,13 @@ void omap_sram_idle(void)
 		if (per_prev_state == PWRDM_POWER_OFF)
 			omap3_per_restore_context();
 		omap_uart_resume_idle(2);
-		if (per_state_modified)
-			pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
+		omap_uart_resume_idle(3);
 	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
-	if (core_next_state < PWRDM_POWER_ON) {
+	if (omap3_has_io_wakeup() &&
+	    (per_next_state < PWRDM_POWER_ON ||
+	     core_next_state < PWRDM_POWER_ON)) {
 		prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
 		omap3_disable_io_chain();
 	}
@@ -498,51 +485,6 @@ int omap3_can_sleep(void)
 	return 1;
 }
 
-/* This sets pwrdm state (other than mpu & core. Currently only ON &
- * RET are supported. Function is assuming that clkdm doesn't have
- * hw_sup mode enabled. */
-int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
-{
-	u32 cur_state;
-	int sleep_switch = 0;
-	int ret = 0;
-
-	if (pwrdm == NULL || IS_ERR(pwrdm))
-		return -EINVAL;
-
-	while (!(pwrdm->pwrsts & (1 << state))) {
-		if (state == PWRDM_POWER_OFF)
-			return ret;
-		state--;
-	}
-
-	cur_state = pwrdm_read_next_pwrst(pwrdm);
-	if (cur_state == state)
-		return ret;
-
-	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
-		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
-		sleep_switch = 1;
-		pwrdm_wait_transition(pwrdm);
-	}
-
-	ret = pwrdm_set_next_pwrst(pwrdm, state);
-	if (ret) {
-		printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
-		       pwrdm->name);
-		goto err;
-	}
-
-	if (sleep_switch) {
-		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
-		pwrdm_wait_transition(pwrdm);
-		pwrdm_state_switch(pwrdm);
-	}
-
-err:
-	return ret;
-}
-
 static void omap3_pm_idle(void)
 {
 	local_irq_disable();
@@ -564,23 +506,6 @@ out:
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state;
 
-static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
-	u32 tick_rate, cycles;
-
-	if (!seconds && !milliseconds)
-		return;
-
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
-	omap_dm_timer_stop(gptimer_wakeup);
-	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
-	pr_info("PM: Resume timer in %u.%03u secs"
-		" (%d ticks at %d ticks/sec.)\n",
-		seconds, milliseconds, cycles, tick_rate);
-}
-
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -601,7 +526,7 @@ static int omap3_pm_suspend(void)
 		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
 	/* Set ones wanted by suspend */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
-		if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+		if (omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
 			goto restore;
 		if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
 			goto restore;
@@ -622,7 +547,7 @@ restore:
 			       pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
-		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 	}
 	if (ret)
 		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
@@ -753,6 +678,14 @@ static void __init omap3_d2d_idle(void)
 
 static void __init prcm_setup_regs(void)
 {
+	u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ?
+					OMAP3630_AUTO_UART4_MASK : 0;
+	u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
+					OMAP3630_EN_UART4_MASK : 0;
+	u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
+					OMAP3630_GRPSEL_UART4_MASK : 0;
+
+
 	/* XXX Reset all wkdeps. This should be done when initializing
 	 * powerdomains */
 	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
@@ -839,6 +772,7 @@ static void __init prcm_setup_regs(void)
 		CM_AUTOIDLE);
 
 	cm_write_mod_reg(
+		omap3630_auto_uart4_mask |
 		OMAP3430_AUTO_GPIO6_MASK |
 		OMAP3430_AUTO_GPIO5_MASK |
 		OMAP3430_AUTO_GPIO4_MASK |
@@ -915,14 +849,16 @@ static void __init prcm_setup_regs(void)
 				OMAP3430_DSS_MOD, PM_WKEN);
 
 	/* Enable wakeups in PER */
-	prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
+	prm_write_mod_reg(omap3630_en_uart4_mask |
+			  OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
 			  OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
 			  OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
 			  OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
 			  OMAP3430_EN_MCBSP4_MASK,
 			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
-	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK |
+	prm_write_mod_reg(omap3630_grpsel_uart4_mask |
+			  OMAP3430_GRPSEL_GPIO2_MASK |
 			  OMAP3430_GRPSEL_GPIO3_MASK |
 			  OMAP3430_GRPSEL_GPIO4_MASK |
 			  OMAP3430_GRPSEL_GPIO5_MASK |
@@ -971,7 +907,7 @@ void omap3_pm_off_mode_enable(int enable)
 
 	list_for_each_entry(pwrst, &pwrst_list, node) {
 		pwrst->next_state = state;
-		set_pwrdm_state(pwrst->pwrdm, state);
+		omap_set_pwrdm_state(pwrst->pwrdm, state);
 	}
 }
 
@@ -1016,7 +952,7 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
 	if (pwrdm_has_hdwr_sar(pwrdm))
 		pwrdm_enable_hdwr_sar(pwrdm);
 
-	return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+	return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
 }
 
 /*
@@ -1026,9 +962,6 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
  */
 static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 {
-	clkdm_clear_all_wkdeps(clkdm);
-	clkdm_clear_all_sleepdeps(clkdm);
-
 	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
 		omap2_clkdm_allow_idle(clkdm);
 	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
new file mode 100644
index 000000000000..54544b4fc76b
--- /dev/null
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -0,0 +1,135 @@
+/*
+ * OMAP4 Power Management Routines
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <plat/powerdomain.h>
+#include <mach/omap4-common.h>
+
+struct power_state {
+	struct powerdomain *pwrdm;
+	u32 next_state;
+#ifdef CONFIG_SUSPEND
+	u32 saved_state;
+#endif
+	struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+#ifdef CONFIG_SUSPEND
+static int omap4_pm_prepare(void)
+{
+	disable_hlt();
+	return 0;
+}
+
+static int omap4_pm_suspend(void)
+{
+	do_wfi();
+	return 0;
+}
+
+static int omap4_pm_enter(suspend_state_t suspend_state)
+{
+	int ret = 0;
+
+	switch (suspend_state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap4_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap4_pm_finish(void)
+{
+	enable_hlt();
+	return;
+}
+
+static int omap4_pm_begin(suspend_state_t state)
+{
+	return 0;
+}
+
+static void omap4_pm_end(void)
+{
+	return;
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.begin		= omap4_pm_begin,
+	.end		= omap4_pm_end,
+	.prepare	= omap4_pm_prepare,
+	.enter		= omap4_pm_enter,
+	.finish		= omap4_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+#endif /* CONFIG_SUSPEND */
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
+{
+	struct power_state *pwrst;
+
+	if (!pwrdm->pwrsts)
+		return 0;
+
+	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
+	if (!pwrst)
+		return -ENOMEM;
+	pwrst->pwrdm = pwrdm;
+	pwrst->next_state = PWRDM_POWER_ON;
+	list_add(&pwrst->node, &pwrst_list);
+
+	return pwrdm_set_next_pwrst(pwrst->pwrdm, pwrst->next_state);
+}
+
+/**
+ * omap4_pm_init - Init routine for OMAP4 PM
+ *
+ * Initializes all powerdomain and clockdomain target states
+ * and all PRCM settings.
+ */
+static int __init omap4_pm_init(void)
+{
+	int ret;
+
+	if (!cpu_is_omap44xx())
+		return -ENODEV;
+
+	pr_err("Power Management for TI OMAP4.\n");
+
+#ifdef CONFIG_PM
+	ret = pwrdm_for_each(pwrdms_setup, NULL);
+	if (ret) {
+		pr_err("Failed to setup powerdomains\n");
+		goto err2;
+	}
+#endif
+
+#ifdef CONFIG_SUSPEND
+	suspend_set_ops(&omap_pm_ops);
+#endif /* CONFIG_SUSPEND */
+
+err2:
+	return ret;
+}
+late_initcall(omap4_pm_init);
diff --git a/arch/arm/mach-omap2/pm_bus.c b/arch/arm/mach-omap2/pm_bus.c
new file mode 100644
index 000000000000..784989f8f2f5
--- /dev/null
+++ b/arch/arm/mach-omap2/pm_bus.c
@@ -0,0 +1,85 @@
+/*
+ * Runtime PM support code for OMAP
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+
+#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
+
+#ifdef CONFIG_PM_RUNTIME
+int omap_pm_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int r, ret = 0;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	ret = pm_generic_runtime_suspend(dev);
+
+	if (!ret && dev->parent == &omap_device_parent) {
+		r = omap_device_idle(pdev);
+		WARN_ON(r);
+	}
+
+	return ret;
+};
+
+int omap_pm_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	int r;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	if (dev->parent == &omap_device_parent) {
+		r = omap_device_enable(pdev);
+		WARN_ON(r);
+	}
+
+	return pm_generic_runtime_resume(dev);
+};
+#else
+#define omap_pm_runtime_suspend NULL
+#define omap_pm_runtime_resume NULL
+#endif /* CONFIG_PM_RUNTIME */
+
+static int __init omap_pm_runtime_init(void)
+{
+	const struct dev_pm_ops *pm;
+	struct dev_pm_ops *omap_pm;
+
+	pm = platform_bus_get_pm_ops();
+	if (!pm) {
+		pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
+	if (!omap_pm) {
+		pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	omap_pm->runtime_suspend = omap_pm_runtime_suspend;
+	omap_pm->runtime_resume = omap_pm_runtime_resume;
+
+	platform_bus_set_pm_ops(omap_pm);
+
+	return 0;
+}
+core_initcall(omap_pm_runtime_init);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index a2904aa7065e..6527ec30dc17 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -875,6 +875,7 @@ int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
 		break;
 	case 4:
 		m = OMAP_MEM4_RETSTATE_MASK;
+		break;
 	default:
 		WARN_ON(1); /* should never happen */
 		return -EEXIST;
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index bd87112beea8..fa904861668b 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -75,12 +75,19 @@ static struct powerdomain mpu_3xxx_pwrdm = {
 	},
 };
 
+/*
+ * The USBTLL Save-and-Restore mechanism is broken on
+ * 3430s upto ES3.0 and 3630ES1.0. Hence this feature
+ * needs to be disabled on these chips.
+ * Refer: 3430 errata ID i459 and 3630 errata ID i579
+ */
 static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = CORE_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
 					   CHIP_IS_OMAP3430ES2 |
-					   CHIP_IS_OMAP3430ES3_0),
+					   CHIP_IS_OMAP3430ES3_0 |
+					   CHIP_IS_OMAP3630ES1),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.banks		  = 2,
@@ -97,7 +104,8 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
 static struct powerdomain core_3xxx_es3_1_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = CORE_MOD,
-	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3_1),
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1 |
+					  CHIP_GE_OMAP3630ES1_1),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
diff --git a/arch/arm/mach-omap2/powerdomains44xx.h b/arch/arm/mach-omap2/powerdomains44xx.h
index c7219513472a..9c01b55d6102 100644
--- a/arch/arm/mach-omap2/powerdomains44xx.h
+++ b/arch/arm/mach-omap2/powerdomains44xx.h
@@ -98,7 +98,7 @@ static struct powerdomain dss_44xx_pwrdm = {
 	.prcm_offs	  = OMAP4430_PRM_DSS_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts_logic_ret = PWRSTS_OFF,
 	.banks		  = 1,
 	.pwrsts_mem_ret	= {
 		[0] = PWRDM_POWER_OFF,	/* dss_mem */
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 995b7edbf18d..298a22a754e2 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -382,6 +382,9 @@
 #define OMAP3430_EN_MPU_SHIFT				1
 
 /* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */
+
+#define OMAP3630_EN_UART4_MASK				(1 << 18)
+#define OMAP3630_EN_UART4_SHIFT				18
 #define OMAP3430_EN_GPIO6_MASK				(1 << 17)
 #define OMAP3430_EN_GPIO6_SHIFT				17
 #define OMAP3430_EN_GPIO5_MASK				(1 << 16)
@@ -422,6 +425,8 @@
 #define OMAP3430_EN_MCBSP2_SHIFT			0
 
 /* CM_IDLEST_PER, PM_WKST_PER shared bits */
+#define OMAP3630_ST_UART4_SHIFT				18
+#define OMAP3630_ST_UART4_MASK				(1 << 18)
 #define OMAP3430_ST_GPIO6_SHIFT				17
 #define OMAP3430_ST_GPIO6_MASK				(1 << 17)
 #define OMAP3430_ST_GPIO5_SHIFT				16
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index c20137497c92..a51846e3a6fa 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -26,13 +26,14 @@
 #include <plat/common.h>
 #include <plat/prcm.h>
 #include <plat/irqs.h>
-#include <plat/control.h>
 
 #include "clock.h"
 #include "clock2xxx.h"
 #include "cm.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
+#include "prm-regbits-44xx.h"
+#include "control.h"
 
 static void __iomem *prm_base;
 static void __iomem *cm_base;
@@ -118,7 +119,7 @@ struct omap3_prcm_regs {
 	u32 wkup_pm_wken;
 };
 
-struct omap3_prcm_regs prcm_context;
+static struct omap3_prcm_regs prcm_context;
 
 u32 omap_prcm_get_reset_sources(void)
 {
@@ -161,8 +162,8 @@ void omap_prcm_arch_reset(char mode, const char *cmd)
 		prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
 						 OMAP2_RM_RSTCTRL);
 	if (cpu_is_omap44xx())
-		prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
-						 OMAP4_RM_RSTCTRL);
+		prm_set_mod_reg_bits(OMAP4430_RST_GLOBAL_WARM_SW_MASK,
+				     prcm_offs, OMAP4_RM_RSTCTRL);
 }
 
 static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
@@ -215,6 +216,30 @@ u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
 	return v;
 }
 
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask)
+{
+	u32 v;
+
+	v = __raw_readl(reg);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg)
+{
+	u32 v;
+
+	v = __raw_readl(reg);
+	v &= ~mask;
+	v |= bits;
+	__raw_writel(v, reg);
+
+	return v;
+}
 /* Read a register in a CM module */
 u32 cm_read_mod_reg(s16 module, u16 idx)
 {
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 7fd6023edf96..9e63cb743a97 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -122,6 +122,7 @@
 #define OMAP3430_MEMRETSTATE_MASK			(1 << 8)
 
 /* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
+#define OMAP3630_GRPSEL_UART4_MASK			(1 << 18)
 #define OMAP3430_GRPSEL_GPIO6_MASK			(1 << 17)
 #define OMAP3430_GRPSEL_GPIO5_MASK			(1 << 16)
 #define OMAP3430_GRPSEL_GPIO4_MASK			(1 << 15)
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index 597be4a2b9ff..25b19b610177 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -1,8 +1,8 @@
 /*
  * OMAP44xx Power Management register bits
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
  * Rajendra Nayak (rnayak@ti.com)
@@ -30,587 +30,611 @@
  * PRM_LDO_SRAM_MPU_SETUP
  */
 #define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT				1
-#define OMAP4430_ABBOFF_ACT_EXPORT_MASK					BITFIELD(1, 1)
+#define OMAP4430_ABBOFF_ACT_EXPORT_MASK					(1 << 1)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
 #define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT				2
-#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK				BITFIELD(2, 2)
+#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK				(1 << 2)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_ABB_IVA_DONE_EN_SHIFT					31
-#define OMAP4430_ABB_IVA_DONE_EN_MASK					BITFIELD(31, 31)
+#define OMAP4430_ABB_IVA_DONE_EN_MASK					(1 << 31)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_ABB_IVA_DONE_ST_SHIFT					31
-#define OMAP4430_ABB_IVA_DONE_ST_MASK					BITFIELD(31, 31)
+#define OMAP4430_ABB_IVA_DONE_ST_MASK					(1 << 31)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
 #define OMAP4430_ABB_MPU_DONE_EN_SHIFT					7
-#define OMAP4430_ABB_MPU_DONE_EN_MASK					BITFIELD(7, 7)
+#define OMAP4430_ABB_MPU_DONE_EN_MASK					(1 << 7)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
 #define OMAP4430_ABB_MPU_DONE_ST_SHIFT					7
-#define OMAP4430_ABB_MPU_DONE_ST_MASK					BITFIELD(7, 7)
+#define OMAP4430_ABB_MPU_DONE_ST_MASK					(1 << 7)
 
 /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
 #define OMAP4430_ACTIVE_FBB_SEL_SHIFT					2
-#define OMAP4430_ACTIVE_FBB_SEL_MASK					BITFIELD(2, 2)
+#define OMAP4430_ACTIVE_FBB_SEL_MASK					(1 << 2)
 
 /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
 #define OMAP4430_ACTIVE_RBB_SEL_SHIFT					1
-#define OMAP4430_ACTIVE_RBB_SEL_MASK					BITFIELD(1, 1)
+#define OMAP4430_ACTIVE_RBB_SEL_MASK					(1 << 1)
 
 /* Used by PM_ABE_PWRSTCTRL */
 #define OMAP4430_AESSMEM_ONSTATE_SHIFT					16
-#define OMAP4430_AESSMEM_ONSTATE_MASK					BITFIELD(16, 17)
+#define OMAP4430_AESSMEM_ONSTATE_MASK					(0x3 << 16)
 
 /* Used by PM_ABE_PWRSTCTRL */
 #define OMAP4430_AESSMEM_RETSTATE_SHIFT					8
-#define OMAP4430_AESSMEM_RETSTATE_MASK					BITFIELD(8, 8)
+#define OMAP4430_AESSMEM_RETSTATE_MASK					(1 << 8)
 
 /* Used by PM_ABE_PWRSTST */
 #define OMAP4430_AESSMEM_STATEST_SHIFT					4
-#define OMAP4430_AESSMEM_STATEST_MASK					BITFIELD(4, 5)
+#define OMAP4430_AESSMEM_STATEST_MASK					(0x3 << 4)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
 #define OMAP4430_AIPOFF_SHIFT						8
-#define OMAP4430_AIPOFF_MASK						BITFIELD(8, 8)
+#define OMAP4430_AIPOFF_MASK						(1 << 8)
 
 /* Used by PRM_VOLTCTRL */
 #define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT				0
-#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK				BITFIELD(0, 1)
+#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK				(0x3 << 0)
 
 /* Used by PRM_VOLTCTRL */
 #define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT				4
-#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK				BITFIELD(4, 5)
+#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK				(0x3 << 4)
 
 /* Used by PRM_VOLTCTRL */
 #define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT				2
-#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK				BITFIELD(2, 3)
+#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK				(0x3 << 2)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_BYPS_RA_ERR_SHIFT					25
+#define OMAP4430_BYPS_RA_ERR_MASK					(1 << 25)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_BYPS_SA_ERR_SHIFT					24
+#define OMAP4430_BYPS_SA_ERR_MASK					(1 << 24)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_BYPS_TIMEOUT_ERR_SHIFT					26
+#define OMAP4430_BYPS_TIMEOUT_ERR_MASK					(1 << 26)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_C2C_RST_SHIFT						10
+#define OMAP4430_C2C_RST_MASK						(1 << 10)
 
 /* Used by PM_CAM_PWRSTCTRL */
 #define OMAP4430_CAM_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_CAM_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+#define OMAP4430_CAM_MEM_ONSTATE_MASK					(0x3 << 16)
 
 /* Used by PM_CAM_PWRSTST */
 #define OMAP4430_CAM_MEM_STATEST_SHIFT					4
-#define OMAP4430_CAM_MEM_STATEST_MASK					BITFIELD(4, 5)
+#define OMAP4430_CAM_MEM_STATEST_MASK					(0x3 << 4)
 
 /* Used by PRM_CLKREQCTRL */
 #define OMAP4430_CLKREQ_COND_SHIFT					0
-#define OMAP4430_CLKREQ_COND_MASK					BITFIELD(0, 2)
+#define OMAP4430_CLKREQ_COND_MASK					(0x7 << 0)
 
 /* Used by PRM_VC_VAL_SMPS_RA_CMD */
 #define OMAP4430_CMDRA_VDD_CORE_L_SHIFT					0
-#define OMAP4430_CMDRA_VDD_CORE_L_MASK					BITFIELD(0, 7)
+#define OMAP4430_CMDRA_VDD_CORE_L_MASK					(0xff << 0)
 
 /* Used by PRM_VC_VAL_SMPS_RA_CMD */
 #define OMAP4430_CMDRA_VDD_IVA_L_SHIFT					8
-#define OMAP4430_CMDRA_VDD_IVA_L_MASK					BITFIELD(8, 15)
+#define OMAP4430_CMDRA_VDD_IVA_L_MASK					(0xff << 8)
 
 /* Used by PRM_VC_VAL_SMPS_RA_CMD */
 #define OMAP4430_CMDRA_VDD_MPU_L_SHIFT					16
-#define OMAP4430_CMDRA_VDD_MPU_L_MASK					BITFIELD(16, 23)
+#define OMAP4430_CMDRA_VDD_MPU_L_MASK					(0xff << 16)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_CMD_VDD_CORE_L_SHIFT					4
-#define OMAP4430_CMD_VDD_CORE_L_MASK					BITFIELD(4, 4)
+#define OMAP4430_CMD_VDD_CORE_L_MASK					(1 << 4)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_CMD_VDD_IVA_L_SHIFT					12
-#define OMAP4430_CMD_VDD_IVA_L_MASK					BITFIELD(12, 12)
+#define OMAP4430_CMD_VDD_IVA_L_MASK					(1 << 12)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_CMD_VDD_MPU_L_SHIFT					17
-#define OMAP4430_CMD_VDD_MPU_L_MASK					BITFIELD(17, 17)
+#define OMAP4430_CMD_VDD_MPU_L_MASK					(1 << 17)
 
 /* Used by PM_CORE_PWRSTCTRL */
 #define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT				18
-#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK				BITFIELD(18, 19)
+#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK				(0x3 << 18)
 
 /* Used by PM_CORE_PWRSTCTRL */
 #define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT				9
-#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK				BITFIELD(9, 9)
+#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK				(1 << 9)
 
 /* Used by PM_CORE_PWRSTST */
 #define OMAP4430_CORE_OCMRAM_STATEST_SHIFT				6
-#define OMAP4430_CORE_OCMRAM_STATEST_MASK				BITFIELD(6, 7)
+#define OMAP4430_CORE_OCMRAM_STATEST_MASK				(0x3 << 6)
 
 /* Used by PM_CORE_PWRSTCTRL */
 #define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT				16
-#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK				BITFIELD(16, 17)
+#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK				(0x3 << 16)
 
 /* Used by PM_CORE_PWRSTCTRL */
 #define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT				8
-#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK				BITFIELD(8, 8)
+#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK				(1 << 8)
 
 /* Used by PM_CORE_PWRSTST */
 #define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT				4
-#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK				BITFIELD(4, 5)
+#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK				(0x3 << 4)
+
+/* Used by REVISION_PRM */
+#define OMAP4430_CUSTOM_SHIFT						6
+#define OMAP4430_CUSTOM_MASK						(0x3 << 6)
 
 /* Used by PRM_VC_VAL_BYPASS */
 #define OMAP4430_DATA_SHIFT						16
-#define OMAP4430_DATA_MASK						BITFIELD(16, 23)
+#define OMAP4430_DATA_MASK						(0xff << 16)
 
 /* Used by PRM_DEVICE_OFF_CTRL */
 #define OMAP4430_DEVICE_OFF_ENABLE_SHIFT				0
-#define OMAP4430_DEVICE_OFF_ENABLE_MASK					BITFIELD(0, 0)
+#define OMAP4430_DEVICE_OFF_ENABLE_MASK					(1 << 0)
 
 /* Used by PRM_VC_CFG_I2C_MODE */
 #define OMAP4430_DFILTEREN_SHIFT					6
-#define OMAP4430_DFILTEREN_MASK						BITFIELD(6, 6)
+#define OMAP4430_DFILTEREN_MASK						(1 << 6)
 
-/* Used by PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP
+ */
+#define OMAP4430_DISABLE_RTA_EXPORT_SHIFT				0
+#define OMAP4430_DISABLE_RTA_EXPORT_MASK				(1 << 0)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
 #define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT				4
-#define OMAP4430_DPLL_ABE_RECAL_EN_MASK					BITFIELD(4, 4)
+#define OMAP4430_DPLL_ABE_RECAL_EN_MASK					(1 << 4)
 
-/* Used by PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
 #define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT				4
-#define OMAP4430_DPLL_ABE_RECAL_ST_MASK					BITFIELD(4, 4)
+#define OMAP4430_DPLL_ABE_RECAL_ST_MASK					(1 << 4)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT				0
-#define OMAP4430_DPLL_CORE_RECAL_EN_MASK				BITFIELD(0, 0)
+#define OMAP4430_DPLL_CORE_RECAL_EN_MASK				(1 << 0)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT				0
-#define OMAP4430_DPLL_CORE_RECAL_ST_MASK				BITFIELD(0, 0)
+#define OMAP4430_DPLL_CORE_RECAL_ST_MASK				(1 << 0)
 
 /* Used by PRM_IRQENABLE_MPU */
 #define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT				6
-#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK				BITFIELD(6, 6)
+#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK				(1 << 6)
 
 /* Used by PRM_IRQSTATUS_MPU */
 #define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT				6
-#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK				BITFIELD(6, 6)
+#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK				(1 << 6)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
 #define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT				2
-#define OMAP4430_DPLL_IVA_RECAL_EN_MASK					BITFIELD(2, 2)
+#define OMAP4430_DPLL_IVA_RECAL_EN_MASK					(1 << 2)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
 #define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT				2
-#define OMAP4430_DPLL_IVA_RECAL_ST_MASK					BITFIELD(2, 2)
+#define OMAP4430_DPLL_IVA_RECAL_ST_MASK					(1 << 2)
 
 /* Used by PRM_IRQENABLE_MPU */
 #define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT				1
-#define OMAP4430_DPLL_MPU_RECAL_EN_MASK					BITFIELD(1, 1)
+#define OMAP4430_DPLL_MPU_RECAL_EN_MASK					(1 << 1)
 
 /* Used by PRM_IRQSTATUS_MPU */
 #define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT				1
-#define OMAP4430_DPLL_MPU_RECAL_ST_MASK					BITFIELD(1, 1)
+#define OMAP4430_DPLL_MPU_RECAL_ST_MASK					(1 << 1)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_DPLL_PER_RECAL_EN_SHIFT				3
-#define OMAP4430_DPLL_PER_RECAL_EN_MASK					BITFIELD(3, 3)
+#define OMAP4430_DPLL_PER_RECAL_EN_MASK					(1 << 3)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_DPLL_PER_RECAL_ST_SHIFT				3
-#define OMAP4430_DPLL_PER_RECAL_ST_MASK					BITFIELD(3, 3)
+#define OMAP4430_DPLL_PER_RECAL_ST_MASK					(1 << 3)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT				7
-#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK				BITFIELD(7, 7)
+#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK				(1 << 7)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT				7
-#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK				BITFIELD(7, 7)
-
-/* Used by PRM_IRQENABLE_MPU */
-#define OMAP4430_DPLL_USB_RECAL_EN_SHIFT				5
-#define OMAP4430_DPLL_USB_RECAL_EN_MASK					BITFIELD(5, 5)
-
-/* Used by PRM_IRQSTATUS_MPU */
-#define OMAP4430_DPLL_USB_RECAL_ST_SHIFT				5
-#define OMAP4430_DPLL_USB_RECAL_ST_MASK					BITFIELD(5, 5)
+#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK				(1 << 7)
 
 /* Used by PM_DSS_PWRSTCTRL */
 #define OMAP4430_DSS_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_DSS_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+#define OMAP4430_DSS_MEM_ONSTATE_MASK					(0x3 << 16)
 
 /* Used by PM_DSS_PWRSTCTRL */
 #define OMAP4430_DSS_MEM_RETSTATE_SHIFT					8
-#define OMAP4430_DSS_MEM_RETSTATE_MASK					BITFIELD(8, 8)
+#define OMAP4430_DSS_MEM_RETSTATE_MASK					(1 << 8)
 
 /* Used by PM_DSS_PWRSTST */
 #define OMAP4430_DSS_MEM_STATEST_SHIFT					4
-#define OMAP4430_DSS_MEM_STATEST_MASK					BITFIELD(4, 5)
+#define OMAP4430_DSS_MEM_STATEST_MASK					(0x3 << 4)
 
 /* Used by PM_CORE_PWRSTCTRL */
 #define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT				20
-#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK				BITFIELD(20, 21)
+#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK				(0x3 << 20)
 
 /* Used by PM_CORE_PWRSTCTRL */
 #define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT				10
-#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK				BITFIELD(10, 10)
+#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK				(1 << 10)
 
 /* Used by PM_CORE_PWRSTST */
 #define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT				8
-#define OMAP4430_DUCATI_L2RAM_STATEST_MASK				BITFIELD(8, 9)
+#define OMAP4430_DUCATI_L2RAM_STATEST_MASK				(0x3 << 8)
 
 /* Used by PM_CORE_PWRSTCTRL */
 #define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT				22
-#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK				BITFIELD(22, 23)
+#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK				(0x3 << 22)
 
 /* Used by PM_CORE_PWRSTCTRL */
 #define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT				11
-#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK				BITFIELD(11, 11)
+#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK				(1 << 11)
 
 /* Used by PM_CORE_PWRSTST */
 #define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT				10
-#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK				BITFIELD(10, 11)
+#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK				(0x3 << 10)
 
 /* Used by RM_MPU_RSTST */
 #define OMAP4430_EMULATION_RST_SHIFT					0
-#define OMAP4430_EMULATION_RST_MASK					BITFIELD(0, 0)
+#define OMAP4430_EMULATION_RST_MASK					(1 << 0)
 
 /* Used by RM_DUCATI_RSTST */
 #define OMAP4430_EMULATION_RST1ST_SHIFT					3
-#define OMAP4430_EMULATION_RST1ST_MASK					BITFIELD(3, 3)
+#define OMAP4430_EMULATION_RST1ST_MASK					(1 << 3)
 
 /* Used by RM_DUCATI_RSTST */
 #define OMAP4430_EMULATION_RST2ST_SHIFT					4
-#define OMAP4430_EMULATION_RST2ST_MASK					BITFIELD(4, 4)
+#define OMAP4430_EMULATION_RST2ST_MASK					(1 << 4)
 
 /* Used by RM_IVAHD_RSTST */
 #define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT				3
-#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK				BITFIELD(3, 3)
+#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK				(1 << 3)
 
 /* Used by RM_IVAHD_RSTST */
 #define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT				4
-#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK				BITFIELD(4, 4)
+#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK				(1 << 4)
 
 /* Used by PM_EMU_PWRSTCTRL */
 #define OMAP4430_EMU_BANK_ONSTATE_SHIFT					16
-#define OMAP4430_EMU_BANK_ONSTATE_MASK					BITFIELD(16, 17)
+#define OMAP4430_EMU_BANK_ONSTATE_MASK					(0x3 << 16)
 
 /* Used by PM_EMU_PWRSTST */
 #define OMAP4430_EMU_BANK_STATEST_SHIFT					4
-#define OMAP4430_EMU_BANK_STATEST_MASK					BITFIELD(4, 5)
-
-/*
- * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
- * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP
- */
-#define OMAP4430_ENABLE_RTA_EXPORT_SHIFT				0
-#define OMAP4430_ENABLE_RTA_EXPORT_MASK					BITFIELD(0, 0)
+#define OMAP4430_EMU_BANK_STATEST_MASK					(0x3 << 4)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
-#define OMAP4430_ENFUNC1_SHIFT						3
-#define OMAP4430_ENFUNC1_MASK						BITFIELD(3, 3)
+#define OMAP4430_ENFUNC1_EXPORT_SHIFT					3
+#define OMAP4430_ENFUNC1_EXPORT_MASK					(1 << 3)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
-#define OMAP4430_ENFUNC3_SHIFT						5
-#define OMAP4430_ENFUNC3_MASK						BITFIELD(5, 5)
+#define OMAP4430_ENFUNC3_EXPORT_SHIFT					5
+#define OMAP4430_ENFUNC3_EXPORT_MASK					(1 << 5)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
 #define OMAP4430_ENFUNC4_SHIFT						6
-#define OMAP4430_ENFUNC4_MASK						BITFIELD(6, 6)
+#define OMAP4430_ENFUNC4_MASK						(1 << 6)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
  * PRM_LDO_SRAM_MPU_SETUP
  */
 #define OMAP4430_ENFUNC5_SHIFT						7
-#define OMAP4430_ENFUNC5_MASK						BITFIELD(7, 7)
+#define OMAP4430_ENFUNC5_MASK						(1 << 7)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
 #define OMAP4430_ERRORGAIN_SHIFT					16
-#define OMAP4430_ERRORGAIN_MASK						BITFIELD(16, 23)
+#define OMAP4430_ERRORGAIN_MASK						(0xff << 16)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
 #define OMAP4430_ERROROFFSET_SHIFT					24
-#define OMAP4430_ERROROFFSET_MASK					BITFIELD(24, 31)
+#define OMAP4430_ERROROFFSET_MASK					(0xff << 24)
 
 /* Used by PRM_RSTST */
 #define OMAP4430_EXTERNAL_WARM_RST_SHIFT				5
-#define OMAP4430_EXTERNAL_WARM_RST_MASK					BITFIELD(5, 5)
+#define OMAP4430_EXTERNAL_WARM_RST_MASK					(1 << 5)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
 #define OMAP4430_FORCEUPDATE_SHIFT					1
-#define OMAP4430_FORCEUPDATE_MASK					BITFIELD(1, 1)
+#define OMAP4430_FORCEUPDATE_MASK					(1 << 1)
 
 /* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
 #define OMAP4430_FORCEUPDATEWAIT_SHIFT					8
-#define OMAP4430_FORCEUPDATEWAIT_MASK					BITFIELD(8, 31)
+#define OMAP4430_FORCEUPDATEWAIT_MASK					(0xffffff << 8)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */
 #define OMAP4430_FORCEWKUP_EN_SHIFT					10
-#define OMAP4430_FORCEWKUP_EN_MASK					BITFIELD(10, 10)
+#define OMAP4430_FORCEWKUP_EN_MASK					(1 << 10)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */
 #define OMAP4430_FORCEWKUP_ST_SHIFT					10
-#define OMAP4430_FORCEWKUP_ST_MASK					BITFIELD(10, 10)
+#define OMAP4430_FORCEWKUP_ST_MASK					(1 << 10)
+
+/* Used by REVISION_PRM */
+#define OMAP4430_FUNC_SHIFT						16
+#define OMAP4430_FUNC_MASK						(0xfff << 16)
 
 /* Used by PM_GFX_PWRSTCTRL */
 #define OMAP4430_GFX_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_GFX_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+#define OMAP4430_GFX_MEM_ONSTATE_MASK					(0x3 << 16)
 
 /* Used by PM_GFX_PWRSTST */
 #define OMAP4430_GFX_MEM_STATEST_SHIFT					4
-#define OMAP4430_GFX_MEM_STATEST_MASK					BITFIELD(4, 5)
+#define OMAP4430_GFX_MEM_STATEST_MASK					(0x3 << 4)
 
 /* Used by PRM_RSTST */
 #define OMAP4430_GLOBAL_COLD_RST_SHIFT					0
-#define OMAP4430_GLOBAL_COLD_RST_MASK					BITFIELD(0, 0)
+#define OMAP4430_GLOBAL_COLD_RST_MASK					(1 << 0)
 
 /* Used by PRM_RSTST */
 #define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				1
-#define OMAP4430_GLOBAL_WARM_SW_RST_MASK				BITFIELD(1, 1)
+#define OMAP4430_GLOBAL_WARM_SW_RST_MASK				(1 << 1)
 
 /* Used by PRM_IO_PMCTRL */
 #define OMAP4430_GLOBAL_WUEN_SHIFT					16
-#define OMAP4430_GLOBAL_WUEN_MASK					BITFIELD(16, 16)
+#define OMAP4430_GLOBAL_WUEN_MASK					(1 << 16)
 
 /* Used by PRM_VC_CFG_I2C_MODE */
 #define OMAP4430_HSMCODE_SHIFT						0
-#define OMAP4430_HSMCODE_MASK						BITFIELD(0, 2)
+#define OMAP4430_HSMCODE_MASK						(0x7 << 0)
 
 /* Used by PRM_VC_CFG_I2C_MODE */
 #define OMAP4430_HSMODEEN_SHIFT						3
-#define OMAP4430_HSMODEEN_MASK						BITFIELD(3, 3)
+#define OMAP4430_HSMODEEN_MASK						(1 << 3)
 
 /* Used by PRM_VC_CFG_I2C_CLK */
 #define OMAP4430_HSSCLH_SHIFT						16
-#define OMAP4430_HSSCLH_MASK						BITFIELD(16, 23)
+#define OMAP4430_HSSCLH_MASK						(0xff << 16)
 
 /* Used by PRM_VC_CFG_I2C_CLK */
 #define OMAP4430_HSSCLL_SHIFT						24
-#define OMAP4430_HSSCLL_MASK						BITFIELD(24, 31)
+#define OMAP4430_HSSCLL_MASK						(0xff << 24)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
 #define OMAP4430_HWA_MEM_ONSTATE_SHIFT					16
-#define OMAP4430_HWA_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+#define OMAP4430_HWA_MEM_ONSTATE_MASK					(0x3 << 16)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
 #define OMAP4430_HWA_MEM_RETSTATE_SHIFT					8
-#define OMAP4430_HWA_MEM_RETSTATE_MASK					BITFIELD(8, 8)
+#define OMAP4430_HWA_MEM_RETSTATE_MASK					(1 << 8)
 
 /* Used by PM_IVAHD_PWRSTST */
 #define OMAP4430_HWA_MEM_STATEST_SHIFT					4
-#define OMAP4430_HWA_MEM_STATEST_MASK					BITFIELD(4, 5)
+#define OMAP4430_HWA_MEM_STATEST_MASK					(0x3 << 4)
 
 /* Used by RM_MPU_RSTST */
 #define OMAP4430_ICECRUSHER_MPU_RST_SHIFT				1
-#define OMAP4430_ICECRUSHER_MPU_RST_MASK				BITFIELD(1, 1)
+#define OMAP4430_ICECRUSHER_MPU_RST_MASK				(1 << 1)
 
 /* Used by RM_DUCATI_RSTST */
 #define OMAP4430_ICECRUSHER_RST1ST_SHIFT				5
-#define OMAP4430_ICECRUSHER_RST1ST_MASK					BITFIELD(5, 5)
+#define OMAP4430_ICECRUSHER_RST1ST_MASK					(1 << 5)
 
 /* Used by RM_DUCATI_RSTST */
 #define OMAP4430_ICECRUSHER_RST2ST_SHIFT				6
-#define OMAP4430_ICECRUSHER_RST2ST_MASK					BITFIELD(6, 6)
+#define OMAP4430_ICECRUSHER_RST2ST_MASK					(1 << 6)
 
 /* Used by RM_IVAHD_RSTST */
 #define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT				5
-#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK				BITFIELD(5, 5)
+#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK				(1 << 5)
 
 /* Used by RM_IVAHD_RSTST */
 #define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT				6
-#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK				BITFIELD(6, 6)
+#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK				(1 << 6)
 
 /* Used by PRM_RSTST */
 #define OMAP4430_ICEPICK_RST_SHIFT					9
-#define OMAP4430_ICEPICK_RST_MASK					BITFIELD(9, 9)
+#define OMAP4430_ICEPICK_RST_MASK					(1 << 9)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
 #define OMAP4430_INITVDD_SHIFT						2
-#define OMAP4430_INITVDD_MASK						BITFIELD(2, 2)
+#define OMAP4430_INITVDD_MASK						(1 << 2)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
 #define OMAP4430_INITVOLTAGE_SHIFT					8
-#define OMAP4430_INITVOLTAGE_MASK					BITFIELD(8, 15)
+#define OMAP4430_INITVOLTAGE_MASK					(0xff << 8)
 
 /*
- * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST,
- * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
- * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
+ * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
+ * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
+ * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
  */
 #define OMAP4430_INTRANSITION_SHIFT					20
-#define OMAP4430_INTRANSITION_MASK					BITFIELD(20, 20)
+#define OMAP4430_INTRANSITION_MASK					(1 << 20)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_IO_EN_SHIFT						9
-#define OMAP4430_IO_EN_MASK						BITFIELD(9, 9)
+#define OMAP4430_IO_EN_MASK						(1 << 9)
 
 /* Used by PRM_IO_PMCTRL */
 #define OMAP4430_IO_ON_STATUS_SHIFT					5
-#define OMAP4430_IO_ON_STATUS_MASK					BITFIELD(5, 5)
+#define OMAP4430_IO_ON_STATUS_MASK					(1 << 5)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_IO_ST_SHIFT						9
-#define OMAP4430_IO_ST_MASK						BITFIELD(9, 9)
+#define OMAP4430_IO_ST_MASK						(1 << 9)
 
 /* Used by PRM_IO_PMCTRL */
 #define OMAP4430_ISOCLK_OVERRIDE_SHIFT					0
-#define OMAP4430_ISOCLK_OVERRIDE_MASK					BITFIELD(0, 0)
+#define OMAP4430_ISOCLK_OVERRIDE_MASK					(1 << 0)
 
 /* Used by PRM_IO_PMCTRL */
 #define OMAP4430_ISOCLK_STATUS_SHIFT					1
-#define OMAP4430_ISOCLK_STATUS_MASK					BITFIELD(1, 1)
+#define OMAP4430_ISOCLK_STATUS_MASK					(1 << 1)
 
 /* Used by PRM_IO_PMCTRL */
 #define OMAP4430_ISOOVR_EXTEND_SHIFT					4
-#define OMAP4430_ISOOVR_EXTEND_MASK					BITFIELD(4, 4)
+#define OMAP4430_ISOOVR_EXTEND_MASK					(1 << 4)
 
 /* Used by PRM_IO_COUNT */
 #define OMAP4430_ISO_2_ON_TIME_SHIFT					0
-#define OMAP4430_ISO_2_ON_TIME_MASK					BITFIELD(0, 7)
+#define OMAP4430_ISO_2_ON_TIME_MASK					(0xff << 0)
 
 /* Used by PM_L3INIT_PWRSTCTRL */
 #define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT				16
-#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK				BITFIELD(16, 17)
+#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK				(0x3 << 16)
 
 /* Used by PM_L3INIT_PWRSTCTRL */
 #define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT				8
-#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK				BITFIELD(8, 8)
+#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK				(1 << 8)
 
 /* Used by PM_L3INIT_PWRSTST */
 #define OMAP4430_L3INIT_BANK1_STATEST_SHIFT				4
-#define OMAP4430_L3INIT_BANK1_STATEST_MASK				BITFIELD(4, 5)
+#define OMAP4430_L3INIT_BANK1_STATEST_MASK				(0x3 << 4)
+
+/*
+ * Used by PM_ABE_PWRSTST, PM_CORE_PWRSTST, PM_IVAHD_PWRSTST,
+ * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
+ */
+#define OMAP4430_LASTPOWERSTATEENTERED_SHIFT				24
+#define OMAP4430_LASTPOWERSTATEENTERED_MASK				(0x3 << 24)
 
 /*
- * Used by PM_CORE_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL,
- * PM_MPU_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL,
- * PM_IVAHD_PWRSTCTRL
+ * Used by PM_ABE_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL,
+ * PM_IVAHD_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
  */
 #define OMAP4430_LOGICRETSTATE_SHIFT					2
-#define OMAP4430_LOGICRETSTATE_MASK					BITFIELD(2, 2)
+#define OMAP4430_LOGICRETSTATE_MASK					(1 << 2)
 
 /*
- * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST,
- * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
- * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
+ * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
+ * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
+ * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
  */
 #define OMAP4430_LOGICSTATEST_SHIFT					2
-#define OMAP4430_LOGICSTATEST_MASK					BITFIELD(2, 2)
+#define OMAP4430_LOGICSTATEST_MASK					(1 << 2)
 
 /*
- * Used by RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT,
- * RM_WKUP_L4WKUP_CONTEXT, RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT,
- * RM_WKUP_SYNCTIMER_CONTEXT, RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT,
- * RM_WKUP_USIM_CONTEXT, RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT,
- * RM_EMU_DEBUGSS_CONTEXT, RM_D2D_SAD2D_CONTEXT, RM_D2D_SAD2D_FW_CONTEXT,
- * RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT,
- * RM_L3INSTR_L3_INSTR_CONTEXT, RM_L3INSTR_OCP_WP1_CONTEXT,
- * RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT, RM_L3_2_OCMC_RAM_CONTEXT,
- * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT, RM_MEMIF_DLL_CONTEXT,
- * RM_MEMIF_DLL_H_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT,
- * RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT, RM_L3INIT_CCPTX_CONTEXT,
- * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT,
- * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
- * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT,
- * RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT,
+ * Used by RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT,
  * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT,
  * RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT, RM_ABE_TIMER5_CONTEXT,
  * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT,
- * RM_ABE_WDT3_CONTEXT, RM_GFX_GFX_CONTEXT, RM_MPU_MPU_CONTEXT,
- * RM_CEFUSE_CEFUSE_CONTEXT, RM_ALWON_MDMINTC_CONTEXT,
- * RM_ALWON_SR_CORE_CONTEXT, RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT,
- * RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT, RM_L4PER_ADC_CONTEXT,
- * RM_L4PER_DMTIMER10_CONTEXT, RM_L4PER_DMTIMER11_CONTEXT,
- * RM_L4PER_DMTIMER2_CONTEXT, RM_L4PER_DMTIMER3_CONTEXT,
- * RM_L4PER_DMTIMER4_CONTEXT, RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT,
- * RM_L4PER_HDQ1W_CONTEXT, RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT,
- * RM_L4PER_I2C2_CONTEXT, RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT,
- * RM_L4PER_I2C5_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT,
- * RM_L4PER_MCASP3_CONTEXT, RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT,
- * RM_L4PER_MCSPI2_CONTEXT, RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT,
- * RM_L4PER_MGATE_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT,
- * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_MSPROHG_CONTEXT,
- * RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT,
- * RM_TESLA_TESLA_CONTEXT, RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT
+ * RM_ABE_WDT3_CONTEXT, RM_ALWON_MDMINTC_CONTEXT, RM_ALWON_SR_CORE_CONTEXT,
+ * RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT, RM_CAM_FDIF_CONTEXT,
+ * RM_CAM_ISS_CONTEXT, RM_CEFUSE_CEFUSE_CONTEXT, RM_D2D_SAD2D_CONTEXT,
+ * RM_D2D_SAD2D_FW_CONTEXT, RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT,
+ * RM_DUCATI_DUCATI_CONTEXT, RM_EMU_DEBUGSS_CONTEXT, RM_GFX_GFX_CONTEXT,
+ * RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT, RM_L3INIT_CCPTX_CONTEXT,
+ * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT,
+ * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
+ * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT,
+ * RM_L3INSTR_L3_3_CONTEXT, RM_L3INSTR_L3_INSTR_CONTEXT,
+ * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT,
+ * RM_L3_2_OCMC_RAM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT,
+ * RM_L4PER_ADC_CONTEXT, RM_L4PER_DMTIMER10_CONTEXT,
+ * RM_L4PER_DMTIMER11_CONTEXT, RM_L4PER_DMTIMER2_CONTEXT,
+ * RM_L4PER_DMTIMER3_CONTEXT, RM_L4PER_DMTIMER4_CONTEXT,
+ * RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT, RM_L4PER_HDQ1W_CONTEXT,
+ * RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, RM_L4PER_I2C2_CONTEXT,
+ * RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT, RM_L4PER_I2C5_CONTEXT,
+ * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT, RM_L4PER_MCASP3_CONTEXT,
+ * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT, RM_L4PER_MCSPI2_CONTEXT,
+ * RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT, RM_L4PER_MGATE_CONTEXT,
+ * RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, RM_L4PER_MMCSD5_CONTEXT,
+ * RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT,
+ * RM_L4SEC_PKAEIP29_CONTEXT, RM_MEMIF_DLL_CONTEXT, RM_MEMIF_DLL_H_CONTEXT,
+ * RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, RM_MEMIF_EMIF_2_CONTEXT,
+ * RM_MEMIF_EMIF_FW_CONTEXT, RM_MPU_MPU_CONTEXT, RM_TESLA_TESLA_CONTEXT,
+ * RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT, RM_WKUP_L4WKUP_CONTEXT,
+ * RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT, RM_WKUP_SYNCTIMER_CONTEXT,
+ * RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT, RM_WKUP_USIM_CONTEXT,
+ * RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT
  */
 #define OMAP4430_LOSTCONTEXT_DFF_SHIFT					0
-#define OMAP4430_LOSTCONTEXT_DFF_MASK					BITFIELD(0, 0)
+#define OMAP4430_LOSTCONTEXT_DFF_MASK					(1 << 0)
 
 /*
  * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_D2D_SAD2D_CONTEXT,
- * RM_D2D_SAD2D_FW_CONTEXT, RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT,
+ * RM_D2D_SAD2D_FW_CONTEXT, RM_DSS_DSS_CONTEXT, RM_DUCATI_DUCATI_CONTEXT,
+ * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT,
+ * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_USB_HOST_CONTEXT,
+ * RM_L3INIT_USB_HOST_FS_CONTEXT, RM_L3INIT_USB_OTG_CONTEXT,
+ * RM_L3INIT_USB_TLL_CONTEXT, RM_L3INSTR_L3_3_CONTEXT,
  * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_GPMC_CONTEXT,
  * RM_L3_2_L3_2_CONTEXT, RM_L4CFG_HW_SEM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT,
- * RM_L4CFG_MAILBOX_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT,
- * RM_MEMIF_EMIF_2_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT,
- * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_L3INIT_HSI_CONTEXT,
- * RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, RM_L3INIT_MMC6_CONTEXT,
- * RM_L3INIT_USB_HOST_CONTEXT, RM_L3INIT_USB_HOST_FS_CONTEXT,
- * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_USB_TLL_CONTEXT, RM_DSS_DSS_CONTEXT,
- * RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT, RM_L4PER_GPIO4_CONTEXT,
- * RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT, RM_L4PER_I2C1_CONTEXT,
- * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT,
- * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4SEC_AES1_CONTEXT,
- * RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT, RM_L4SEC_DES3DES_CONTEXT,
- * RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT, RM_TESLA_TESLA_CONTEXT
+ * RM_L4CFG_MAILBOX_CONTEXT, RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT,
+ * RM_L4PER_GPIO4_CONTEXT, RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT,
+ * RM_L4PER_I2C1_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT,
+ * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT,
+ * RM_L4SEC_AES1_CONTEXT, RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT,
+ * RM_L4SEC_DES3DES_CONTEXT, RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT,
+ * RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, RM_MEMIF_EMIF_2_CONTEXT,
+ * RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT,
+ * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_TESLA_TESLA_CONTEXT
  */
 #define OMAP4430_LOSTCONTEXT_RFF_SHIFT					1
-#define OMAP4430_LOSTCONTEXT_RFF_MASK					BITFIELD(1, 1)
+#define OMAP4430_LOSTCONTEXT_RFF_MASK					(1 << 1)
 
 /* Used by RM_ABE_AESS_CONTEXT */
 #define OMAP4430_LOSTMEM_AESSMEM_SHIFT					8
-#define OMAP4430_LOSTMEM_AESSMEM_MASK					BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_AESSMEM_MASK					(1 << 8)
 
 /* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */
 #define OMAP4430_LOSTMEM_CAM_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_CAM_MEM_MASK					BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_CAM_MEM_MASK					(1 << 8)
 
 /* Used by RM_L3INSTR_OCP_WP1_CONTEXT */
 #define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK				BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK				(1 << 8)
 
 /* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */
 #define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT			9
-#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK			BITFIELD(9, 9)
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK			(1 << 9)
 
 /* Used by RM_L3_2_OCMC_RAM_CONTEXT */
 #define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK				BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK				(1 << 8)
 
 /*
  * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT,
  * RM_SDMA_SDMA_CONTEXT
  */
 #define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK				BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK				(1 << 8)
 
 /* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */
 #define OMAP4430_LOSTMEM_DSS_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_DSS_MEM_MASK					BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_DSS_MEM_MASK					(1 << 8)
 
 /* Used by RM_DUCATI_DUCATI_CONTEXT */
 #define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT				9
-#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK				BITFIELD(9, 9)
+#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK				(1 << 9)
 
 /* Used by RM_DUCATI_DUCATI_CONTEXT */
 #define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT				8
-#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK				BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK				(1 << 8)
 
 /* Used by RM_EMU_DEBUGSS_CONTEXT */
 #define OMAP4430_LOSTMEM_EMU_BANK_SHIFT					8
-#define OMAP4430_LOSTMEM_EMU_BANK_MASK					BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_EMU_BANK_MASK					(1 << 8)
 
 /* Used by RM_GFX_GFX_CONTEXT */
 #define OMAP4430_LOSTMEM_GFX_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_GFX_MEM_MASK					BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_GFX_MEM_MASK					(1 << 8)
 
 /* Used by RM_IVAHD_IVAHD_CONTEXT */
 #define OMAP4430_LOSTMEM_HWA_MEM_SHIFT					10
-#define OMAP4430_LOSTMEM_HWA_MEM_MASK					BITFIELD(10, 10)
+#define OMAP4430_LOSTMEM_HWA_MEM_MASK					(1 << 10)
 
 /*
  * Used by RM_L3INIT_CCPTX_CONTEXT, RM_L3INIT_EMAC_CONTEXT,
@@ -620,19 +644,19 @@
  * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT
  */
 #define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT				8
-#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK				BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK				(1 << 8)
 
 /* Used by RM_MPU_MPU_CONTEXT */
 #define OMAP4430_LOSTMEM_MPU_L1_SHIFT					8
-#define OMAP4430_LOSTMEM_MPU_L1_MASK					BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_MPU_L1_MASK					(1 << 8)
 
 /* Used by RM_MPU_MPU_CONTEXT */
 #define OMAP4430_LOSTMEM_MPU_L2_SHIFT					9
-#define OMAP4430_LOSTMEM_MPU_L2_MASK					BITFIELD(9, 9)
+#define OMAP4430_LOSTMEM_MPU_L2_MASK					(1 << 9)
 
 /* Used by RM_MPU_MPU_CONTEXT */
 #define OMAP4430_LOSTMEM_MPU_RAM_SHIFT					10
-#define OMAP4430_LOSTMEM_MPU_RAM_MASK					BITFIELD(10, 10)
+#define OMAP4430_LOSTMEM_MPU_RAM_MASK					(1 << 10)
 
 /*
  * Used by RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT,
@@ -640,14 +664,14 @@
  * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT
  */
 #define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK				BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK				(1 << 8)
 
 /*
  * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT,
  * RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT
  */
 #define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT				8
-#define OMAP4430_LOSTMEM_PERIHPMEM_MASK					BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_PERIHPMEM_MASK					(1 << 8)
 
 /*
  * Used by RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_UART1_CONTEXT,
@@ -655,245 +679,237 @@
  * RM_L4SEC_CRYPTODMA_CONTEXT
  */
 #define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK				BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK				(1 << 8)
 
 /* Used by RM_IVAHD_SL2_CONTEXT */
 #define OMAP4430_LOSTMEM_SL2_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_SL2_MEM_MASK					BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_SL2_MEM_MASK					(1 << 8)
 
 /* Used by RM_IVAHD_IVAHD_CONTEXT */
 #define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT					8
-#define OMAP4430_LOSTMEM_TCM1_MEM_MASK					BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_TCM1_MEM_MASK					(1 << 8)
 
 /* Used by RM_IVAHD_IVAHD_CONTEXT */
 #define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT					9
-#define OMAP4430_LOSTMEM_TCM2_MEM_MASK					BITFIELD(9, 9)
+#define OMAP4430_LOSTMEM_TCM2_MEM_MASK					(1 << 9)
 
 /* Used by RM_TESLA_TESLA_CONTEXT */
 #define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT				10
-#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK				BITFIELD(10, 10)
+#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK				(1 << 10)
 
 /* Used by RM_TESLA_TESLA_CONTEXT */
 #define OMAP4430_LOSTMEM_TESLA_L1_SHIFT					8
-#define OMAP4430_LOSTMEM_TESLA_L1_MASK					BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_TESLA_L1_MASK					(1 << 8)
 
 /* Used by RM_TESLA_TESLA_CONTEXT */
 #define OMAP4430_LOSTMEM_TESLA_L2_SHIFT					9
-#define OMAP4430_LOSTMEM_TESLA_L2_MASK					BITFIELD(9, 9)
+#define OMAP4430_LOSTMEM_TESLA_L2_MASK					(1 << 9)
 
 /* Used by RM_WKUP_SARRAM_CONTEXT */
 #define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT				8
-#define OMAP4430_LOSTMEM_WKUP_BANK_MASK					BITFIELD(8, 8)
+#define OMAP4430_LOSTMEM_WKUP_BANK_MASK					(1 << 8)
 
 /*
- * Used by PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_L3INIT_PWRSTCTRL,
- * PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
- * PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL
+ * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
+ * PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_IVAHD_PWRSTCTRL,
+ * PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
  */
 #define OMAP4430_LOWPOWERSTATECHANGE_SHIFT				4
-#define OMAP4430_LOWPOWERSTATECHANGE_MASK				BITFIELD(4, 4)
-
-/* Used by PM_CORE_PWRSTCTRL */
-#define OMAP4430_MEMORYCHANGE_SHIFT					3
-#define OMAP4430_MEMORYCHANGE_MASK					BITFIELD(3, 3)
+#define OMAP4430_LOWPOWERSTATECHANGE_MASK				(1 << 4)
 
 /* Used by PRM_MODEM_IF_CTRL */
 #define OMAP4430_MODEM_READY_SHIFT					1
-#define OMAP4430_MODEM_READY_MASK					BITFIELD(1, 1)
+#define OMAP4430_MODEM_READY_MASK					(1 << 1)
 
 /* Used by PRM_MODEM_IF_CTRL */
 #define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT				9
-#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK				BITFIELD(9, 9)
+#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK				(1 << 9)
 
 /* Used by PRM_MODEM_IF_CTRL */
 #define OMAP4430_MODEM_SLEEP_ST_SHIFT					16
-#define OMAP4430_MODEM_SLEEP_ST_MASK					BITFIELD(16, 16)
+#define OMAP4430_MODEM_SLEEP_ST_MASK					(1 << 16)
 
 /* Used by PRM_MODEM_IF_CTRL */
 #define OMAP4430_MODEM_WAKE_IRQ_SHIFT					8
-#define OMAP4430_MODEM_WAKE_IRQ_MASK					BITFIELD(8, 8)
+#define OMAP4430_MODEM_WAKE_IRQ_MASK					(1 << 8)
 
 /* Used by PM_MPU_PWRSTCTRL */
 #define OMAP4430_MPU_L1_ONSTATE_SHIFT					16
-#define OMAP4430_MPU_L1_ONSTATE_MASK					BITFIELD(16, 17)
+#define OMAP4430_MPU_L1_ONSTATE_MASK					(0x3 << 16)
 
 /* Used by PM_MPU_PWRSTCTRL */
 #define OMAP4430_MPU_L1_RETSTATE_SHIFT					8
-#define OMAP4430_MPU_L1_RETSTATE_MASK					BITFIELD(8, 8)
+#define OMAP4430_MPU_L1_RETSTATE_MASK					(1 << 8)
 
 /* Used by PM_MPU_PWRSTST */
 #define OMAP4430_MPU_L1_STATEST_SHIFT					4
-#define OMAP4430_MPU_L1_STATEST_MASK					BITFIELD(4, 5)
+#define OMAP4430_MPU_L1_STATEST_MASK					(0x3 << 4)
 
 /* Used by PM_MPU_PWRSTCTRL */
 #define OMAP4430_MPU_L2_ONSTATE_SHIFT					18
-#define OMAP4430_MPU_L2_ONSTATE_MASK					BITFIELD(18, 19)
+#define OMAP4430_MPU_L2_ONSTATE_MASK					(0x3 << 18)
 
 /* Used by PM_MPU_PWRSTCTRL */
 #define OMAP4430_MPU_L2_RETSTATE_SHIFT					9
-#define OMAP4430_MPU_L2_RETSTATE_MASK					BITFIELD(9, 9)
+#define OMAP4430_MPU_L2_RETSTATE_MASK					(1 << 9)
 
 /* Used by PM_MPU_PWRSTST */
 #define OMAP4430_MPU_L2_STATEST_SHIFT					6
-#define OMAP4430_MPU_L2_STATEST_MASK					BITFIELD(6, 7)
+#define OMAP4430_MPU_L2_STATEST_MASK					(0x3 << 6)
 
 /* Used by PM_MPU_PWRSTCTRL */
 #define OMAP4430_MPU_RAM_ONSTATE_SHIFT					20
-#define OMAP4430_MPU_RAM_ONSTATE_MASK					BITFIELD(20, 21)
+#define OMAP4430_MPU_RAM_ONSTATE_MASK					(0x3 << 20)
 
 /* Used by PM_MPU_PWRSTCTRL */
 #define OMAP4430_MPU_RAM_RETSTATE_SHIFT					10
-#define OMAP4430_MPU_RAM_RETSTATE_MASK					BITFIELD(10, 10)
+#define OMAP4430_MPU_RAM_RETSTATE_MASK					(1 << 10)
 
 /* Used by PM_MPU_PWRSTST */
 #define OMAP4430_MPU_RAM_STATEST_SHIFT					8
-#define OMAP4430_MPU_RAM_STATEST_MASK					BITFIELD(8, 9)
+#define OMAP4430_MPU_RAM_STATEST_MASK					(0x3 << 8)
 
 /* Used by PRM_RSTST */
 #define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT				2
-#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK				BITFIELD(2, 2)
+#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK				(1 << 2)
 
 /* Used by PRM_RSTST */
 #define OMAP4430_MPU_WDT_RST_SHIFT					3
-#define OMAP4430_MPU_WDT_RST_MASK					BITFIELD(3, 3)
+#define OMAP4430_MPU_WDT_RST_MASK					(1 << 3)
 
 /* Used by PM_L4PER_PWRSTCTRL */
 #define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT				18
-#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK				BITFIELD(18, 19)
+#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK				(0x3 << 18)
 
 /* Used by PM_L4PER_PWRSTCTRL */
 #define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT			9
-#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK				BITFIELD(9, 9)
+#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK				(1 << 9)
 
 /* Used by PM_L4PER_PWRSTST */
 #define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT				6
-#define OMAP4430_NONRETAINED_BANK_STATEST_MASK				BITFIELD(6, 7)
+#define OMAP4430_NONRETAINED_BANK_STATEST_MASK				(0x3 << 6)
 
 /* Used by PM_CORE_PWRSTCTRL */
 #define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT				24
-#define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK				BITFIELD(24, 25)
+#define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK				(0x3 << 24)
 
 /* Used by PM_CORE_PWRSTCTRL */
 #define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT				12
-#define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK				BITFIELD(12, 12)
+#define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK				(1 << 12)
 
 /* Used by PM_CORE_PWRSTST */
 #define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT				12
-#define OMAP4430_OCP_NRET_BANK_STATEST_MASK				BITFIELD(12, 13)
+#define OMAP4430_OCP_NRET_BANK_STATEST_MASK				(0x3 << 12)
 
 /*
  * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
  * PRM_VC_VAL_CMD_VDD_MPU_L
  */
 #define OMAP4430_OFF_SHIFT						0
-#define OMAP4430_OFF_MASK						BITFIELD(0, 7)
-
-/* Used by PRM_LDO_BANDGAP_CTRL */
-#define OMAP4430_OFF_ENABLE_SHIFT					0
-#define OMAP4430_OFF_ENABLE_MASK					BITFIELD(0, 0)
+#define OMAP4430_OFF_MASK						(0xff << 0)
 
 /*
  * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
  * PRM_VC_VAL_CMD_VDD_MPU_L
  */
 #define OMAP4430_ON_SHIFT						24
-#define OMAP4430_ON_MASK						BITFIELD(24, 31)
+#define OMAP4430_ON_MASK						(0xff << 24)
 
 /*
  * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
  * PRM_VC_VAL_CMD_VDD_MPU_L
  */
 #define OMAP4430_ONLP_SHIFT						16
-#define OMAP4430_ONLP_MASK						BITFIELD(16, 23)
+#define OMAP4430_ONLP_MASK						(0xff << 16)
 
 /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
 #define OMAP4430_OPP_CHANGE_SHIFT					2
-#define OMAP4430_OPP_CHANGE_MASK					BITFIELD(2, 2)
+#define OMAP4430_OPP_CHANGE_MASK					(1 << 2)
 
 /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
 #define OMAP4430_OPP_SEL_SHIFT						0
-#define OMAP4430_OPP_SEL_MASK						BITFIELD(0, 1)
+#define OMAP4430_OPP_SEL_MASK						(0x3 << 0)
 
 /* Used by PRM_SRAM_COUNT */
 #define OMAP4430_PCHARGECNT_VALUE_SHIFT					0
-#define OMAP4430_PCHARGECNT_VALUE_MASK					BITFIELD(0, 5)
+#define OMAP4430_PCHARGECNT_VALUE_MASK					(0x3f << 0)
 
 /* Used by PRM_PSCON_COUNT */
 #define OMAP4430_PCHARGE_TIME_SHIFT					0
-#define OMAP4430_PCHARGE_TIME_MASK					BITFIELD(0, 7)
+#define OMAP4430_PCHARGE_TIME_MASK					(0xff << 0)
 
 /* Used by PM_ABE_PWRSTCTRL */
 #define OMAP4430_PERIPHMEM_ONSTATE_SHIFT				20
-#define OMAP4430_PERIPHMEM_ONSTATE_MASK					BITFIELD(20, 21)
+#define OMAP4430_PERIPHMEM_ONSTATE_MASK					(0x3 << 20)
 
 /* Used by PM_ABE_PWRSTCTRL */
 #define OMAP4430_PERIPHMEM_RETSTATE_SHIFT				10
-#define OMAP4430_PERIPHMEM_RETSTATE_MASK				BITFIELD(10, 10)
+#define OMAP4430_PERIPHMEM_RETSTATE_MASK				(1 << 10)
 
 /* Used by PM_ABE_PWRSTST */
 #define OMAP4430_PERIPHMEM_STATEST_SHIFT				8
-#define OMAP4430_PERIPHMEM_STATEST_MASK					BITFIELD(8, 9)
+#define OMAP4430_PERIPHMEM_STATEST_MASK					(0x3 << 8)
 
 /* Used by PRM_PHASE1_CNDP */
 #define OMAP4430_PHASE1_CNDP_SHIFT					0
-#define OMAP4430_PHASE1_CNDP_MASK					BITFIELD(0, 31)
+#define OMAP4430_PHASE1_CNDP_MASK					(0xffffffff << 0)
 
 /* Used by PRM_PHASE2A_CNDP */
 #define OMAP4430_PHASE2A_CNDP_SHIFT					0
-#define OMAP4430_PHASE2A_CNDP_MASK					BITFIELD(0, 31)
+#define OMAP4430_PHASE2A_CNDP_MASK					(0xffffffff << 0)
 
 /* Used by PRM_PHASE2B_CNDP */
 #define OMAP4430_PHASE2B_CNDP_SHIFT					0
-#define OMAP4430_PHASE2B_CNDP_MASK					BITFIELD(0, 31)
+#define OMAP4430_PHASE2B_CNDP_MASK					(0xffffffff << 0)
 
 /* Used by PRM_PSCON_COUNT */
 #define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT				8
-#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK				BITFIELD(8, 15)
+#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK				(0xff << 8)
 
 /*
- * Used by PM_EMU_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL,
- * PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL,
- * PM_CEFUSE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
- * PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL
+ * Used by PM_ABE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
+ * PM_CORE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_EMU_PWRSTCTRL, PM_GFX_PWRSTCTRL,
+ * PM_IVAHD_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL, PM_TESLA_PWRSTCTRL
  */
 #define OMAP4430_POWERSTATE_SHIFT					0
-#define OMAP4430_POWERSTATE_MASK					BITFIELD(0, 1)
+#define OMAP4430_POWERSTATE_MASK					(0x3 << 0)
 
 /*
- * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST,
- * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
- * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
+ * Used by PM_ABE_PWRSTST, PM_CAM_PWRSTST, PM_CEFUSE_PWRSTST, PM_CORE_PWRSTST,
+ * PM_DSS_PWRSTST, PM_EMU_PWRSTST, PM_GFX_PWRSTST, PM_IVAHD_PWRSTST,
+ * PM_L3INIT_PWRSTST, PM_L4PER_PWRSTST, PM_MPU_PWRSTST, PM_TESLA_PWRSTST
  */
 #define OMAP4430_POWERSTATEST_SHIFT					0
-#define OMAP4430_POWERSTATEST_MASK					BITFIELD(0, 1)
+#define OMAP4430_POWERSTATEST_MASK					(0x3 << 0)
 
 /* Used by PRM_PWRREQCTRL */
 #define OMAP4430_PWRREQ_COND_SHIFT					0
-#define OMAP4430_PWRREQ_COND_MASK					BITFIELD(0, 1)
+#define OMAP4430_PWRREQ_COND_MASK					(0x3 << 0)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_RACEN_VDD_CORE_L_SHIFT					3
-#define OMAP4430_RACEN_VDD_CORE_L_MASK					BITFIELD(3, 3)
+#define OMAP4430_RACEN_VDD_CORE_L_MASK					(1 << 3)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_RACEN_VDD_IVA_L_SHIFT					11
-#define OMAP4430_RACEN_VDD_IVA_L_MASK					BITFIELD(11, 11)
+#define OMAP4430_RACEN_VDD_IVA_L_MASK					(1 << 11)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_RACEN_VDD_MPU_L_SHIFT					20
-#define OMAP4430_RACEN_VDD_MPU_L_MASK					BITFIELD(20, 20)
+#define OMAP4430_RACEN_VDD_MPU_L_MASK					(1 << 20)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_RAC_VDD_CORE_L_SHIFT					2
-#define OMAP4430_RAC_VDD_CORE_L_MASK					BITFIELD(2, 2)
+#define OMAP4430_RAC_VDD_CORE_L_MASK					(1 << 2)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_RAC_VDD_IVA_L_SHIFT					10
-#define OMAP4430_RAC_VDD_IVA_L_MASK					BITFIELD(10, 10)
+#define OMAP4430_RAC_VDD_IVA_L_MASK					(1 << 10)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_RAC_VDD_MPU_L_SHIFT					19
-#define OMAP4430_RAC_VDD_MPU_L_MASK					BITFIELD(19, 19)
+#define OMAP4430_RAC_VDD_MPU_L_MASK					(1 << 19)
 
 /*
  * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
@@ -901,7 +917,7 @@
  * PRM_VOLTSETUP_MPU_RET_SLEEP
  */
 #define OMAP4430_RAMP_DOWN_COUNT_SHIFT					16
-#define OMAP4430_RAMP_DOWN_COUNT_MASK					BITFIELD(16, 21)
+#define OMAP4430_RAMP_DOWN_COUNT_MASK					(0x3f << 16)
 
 /*
  * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
@@ -909,7 +925,7 @@
  * PRM_VOLTSETUP_MPU_RET_SLEEP
  */
 #define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT				24
-#define OMAP4430_RAMP_DOWN_PRESCAL_MASK					BITFIELD(24, 25)
+#define OMAP4430_RAMP_DOWN_PRESCAL_MASK					(0x3 << 24)
 
 /*
  * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
@@ -917,7 +933,7 @@
  * PRM_VOLTSETUP_MPU_RET_SLEEP
  */
 #define OMAP4430_RAMP_UP_COUNT_SHIFT					0
-#define OMAP4430_RAMP_UP_COUNT_MASK					BITFIELD(0, 5)
+#define OMAP4430_RAMP_UP_COUNT_MASK					(0x3f << 0)
 
 /*
  * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
@@ -925,1281 +941,1381 @@
  * PRM_VOLTSETUP_MPU_RET_SLEEP
  */
 #define OMAP4430_RAMP_UP_PRESCAL_SHIFT					8
-#define OMAP4430_RAMP_UP_PRESCAL_MASK					BITFIELD(8, 9)
+#define OMAP4430_RAMP_UP_PRESCAL_MASK					(0x3 << 8)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_RAV_VDD_CORE_L_SHIFT					1
-#define OMAP4430_RAV_VDD_CORE_L_MASK					BITFIELD(1, 1)
+#define OMAP4430_RAV_VDD_CORE_L_MASK					(1 << 1)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_RAV_VDD_IVA_L_SHIFT					9
-#define OMAP4430_RAV_VDD_IVA_L_MASK					BITFIELD(9, 9)
+#define OMAP4430_RAV_VDD_IVA_L_MASK					(1 << 9)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_RAV_VDD_MPU_L_SHIFT					18
-#define OMAP4430_RAV_VDD_MPU_L_MASK					BITFIELD(18, 18)
+#define OMAP4430_RAV_VDD_MPU_L_MASK					(1 << 18)
 
 /* Used by PRM_VC_VAL_BYPASS */
 #define OMAP4430_REGADDR_SHIFT						8
-#define OMAP4430_REGADDR_MASK						BITFIELD(8, 15)
+#define OMAP4430_REGADDR_MASK						(0xff << 8)
 
 /*
  * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
  * PRM_VC_VAL_CMD_VDD_MPU_L
  */
 #define OMAP4430_RET_SHIFT						8
-#define OMAP4430_RET_MASK						BITFIELD(8, 15)
+#define OMAP4430_RET_MASK						(0xff << 8)
 
 /* Used by PM_L4PER_PWRSTCTRL */
 #define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT				16
-#define OMAP4430_RETAINED_BANK_ONSTATE_MASK				BITFIELD(16, 17)
+#define OMAP4430_RETAINED_BANK_ONSTATE_MASK				(0x3 << 16)
 
 /* Used by PM_L4PER_PWRSTCTRL */
 #define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT				8
-#define OMAP4430_RETAINED_BANK_RETSTATE_MASK				BITFIELD(8, 8)
+#define OMAP4430_RETAINED_BANK_RETSTATE_MASK				(1 << 8)
 
 /* Used by PM_L4PER_PWRSTST */
 #define OMAP4430_RETAINED_BANK_STATEST_SHIFT				4
-#define OMAP4430_RETAINED_BANK_STATEST_MASK				BITFIELD(4, 5)
+#define OMAP4430_RETAINED_BANK_STATEST_MASK				(0x3 << 4)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
  * PRM_LDO_SRAM_MPU_CTRL
  */
 #define OMAP4430_RETMODE_ENABLE_SHIFT					0
-#define OMAP4430_RETMODE_ENABLE_MASK					BITFIELD(0, 0)
+#define OMAP4430_RETMODE_ENABLE_MASK					(1 << 0)
 
-/* Used by REVISION_PRM */
-#define OMAP4430_REV_SHIFT						0
-#define OMAP4430_REV_MASK						BITFIELD(0, 7)
-
-/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */
+/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL, RM_TESLA_RSTCTRL */
 #define OMAP4430_RST1_SHIFT						0
-#define OMAP4430_RST1_MASK						BITFIELD(0, 0)
+#define OMAP4430_RST1_MASK						(1 << 0)
 
-/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */
+/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST, RM_TESLA_RSTST */
 #define OMAP4430_RST1ST_SHIFT						0
-#define OMAP4430_RST1ST_MASK						BITFIELD(0, 0)
+#define OMAP4430_RST1ST_MASK						(1 << 0)
 
-/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */
+/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL, RM_TESLA_RSTCTRL */
 #define OMAP4430_RST2_SHIFT						1
-#define OMAP4430_RST2_MASK						BITFIELD(1, 1)
+#define OMAP4430_RST2_MASK						(1 << 1)
 
-/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */
+/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST, RM_TESLA_RSTST */
 #define OMAP4430_RST2ST_SHIFT						1
-#define OMAP4430_RST2ST_MASK						BITFIELD(1, 1)
+#define OMAP4430_RST2ST_MASK						(1 << 1)
 
 /* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */
 #define OMAP4430_RST3_SHIFT						2
-#define OMAP4430_RST3_MASK						BITFIELD(2, 2)
+#define OMAP4430_RST3_MASK						(1 << 2)
 
 /* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */
 #define OMAP4430_RST3ST_SHIFT						2
-#define OMAP4430_RST3ST_MASK						BITFIELD(2, 2)
+#define OMAP4430_RST3ST_MASK						(1 << 2)
 
 /* Used by PRM_RSTTIME */
 #define OMAP4430_RSTTIME1_SHIFT						0
-#define OMAP4430_RSTTIME1_MASK						BITFIELD(0, 9)
+#define OMAP4430_RSTTIME1_MASK						(0x3ff << 0)
 
 /* Used by PRM_RSTTIME */
 #define OMAP4430_RSTTIME2_SHIFT						10
-#define OMAP4430_RSTTIME2_MASK						BITFIELD(10, 14)
+#define OMAP4430_RSTTIME2_MASK						(0x1f << 10)
 
 /* Used by PRM_RSTCTRL */
 #define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT				1
-#define OMAP4430_RST_GLOBAL_COLD_SW_MASK				BITFIELD(1, 1)
+#define OMAP4430_RST_GLOBAL_COLD_SW_MASK				(1 << 1)
 
 /* Used by PRM_RSTCTRL */
 #define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT				0
-#define OMAP4430_RST_GLOBAL_WARM_SW_MASK				BITFIELD(0, 0)
+#define OMAP4430_RST_GLOBAL_WARM_SW_MASK				(1 << 0)
+
+/* Used by REVISION_PRM */
+#define OMAP4430_R_RTL_SHIFT						11
+#define OMAP4430_R_RTL_MASK						(0x1f << 11)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_SA_VDD_CORE_L_SHIFT					0
-#define OMAP4430_SA_VDD_CORE_L_MASK					BITFIELD(0, 0)
+#define OMAP4430_SA_VDD_CORE_L_MASK					(1 << 0)
 
 /* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */
 #define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT				0
-#define OMAP4430_SA_VDD_CORE_L_0_6_MASK					BITFIELD(0, 6)
+#define OMAP4430_SA_VDD_CORE_L_0_6_MASK					(0x7f << 0)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_SA_VDD_IVA_L_SHIFT					8
-#define OMAP4430_SA_VDD_IVA_L_MASK					BITFIELD(8, 8)
+#define OMAP4430_SA_VDD_IVA_L_MASK					(1 << 8)
 
 /* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */
 #define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT			8
-#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK			BITFIELD(8, 14)
+#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK			(0x7f << 8)
 
 /* Used by PRM_VC_CFG_CHANNEL */
 #define OMAP4430_SA_VDD_MPU_L_SHIFT					16
-#define OMAP4430_SA_VDD_MPU_L_MASK					BITFIELD(16, 16)
+#define OMAP4430_SA_VDD_MPU_L_MASK					(1 << 16)
 
 /* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */
 #define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT			16
-#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK			BITFIELD(16, 22)
+#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK			(0x7f << 16)
+
+/* Used by REVISION_PRM */
+#define OMAP4430_SCHEME_SHIFT						30
+#define OMAP4430_SCHEME_MASK						(0x3 << 30)
 
 /* Used by PRM_VC_CFG_I2C_CLK */
 #define OMAP4430_SCLH_SHIFT						0
-#define OMAP4430_SCLH_MASK						BITFIELD(0, 7)
+#define OMAP4430_SCLH_MASK						(0xff << 0)
 
 /* Used by PRM_VC_CFG_I2C_CLK */
 #define OMAP4430_SCLL_SHIFT						8
-#define OMAP4430_SCLL_MASK						BITFIELD(8, 15)
+#define OMAP4430_SCLL_MASK						(0xff << 8)
 
 /* Used by PRM_RSTST */
 #define OMAP4430_SECURE_WDT_RST_SHIFT					4
-#define OMAP4430_SECURE_WDT_RST_MASK					BITFIELD(4, 4)
+#define OMAP4430_SECURE_WDT_RST_MASK					(1 << 4)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
 #define OMAP4430_SL2_MEM_ONSTATE_SHIFT					18
-#define OMAP4430_SL2_MEM_ONSTATE_MASK					BITFIELD(18, 19)
+#define OMAP4430_SL2_MEM_ONSTATE_MASK					(0x3 << 18)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
 #define OMAP4430_SL2_MEM_RETSTATE_SHIFT					9
-#define OMAP4430_SL2_MEM_RETSTATE_MASK					BITFIELD(9, 9)
+#define OMAP4430_SL2_MEM_RETSTATE_MASK					(1 << 9)
 
 /* Used by PM_IVAHD_PWRSTST */
 #define OMAP4430_SL2_MEM_STATEST_SHIFT					6
-#define OMAP4430_SL2_MEM_STATEST_MASK					BITFIELD(6, 7)
+#define OMAP4430_SL2_MEM_STATEST_MASK					(0x3 << 6)
 
 /* Used by PRM_VC_VAL_BYPASS */
 #define OMAP4430_SLAVEADDR_SHIFT					0
-#define OMAP4430_SLAVEADDR_MASK						BITFIELD(0, 6)
+#define OMAP4430_SLAVEADDR_MASK						(0x7f << 0)
 
 /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
 #define OMAP4430_SLEEP_RBB_SEL_SHIFT					3
-#define OMAP4430_SLEEP_RBB_SEL_MASK					BITFIELD(3, 3)
+#define OMAP4430_SLEEP_RBB_SEL_MASK					(1 << 3)
 
 /* Used by PRM_SRAM_COUNT */
 #define OMAP4430_SLPCNT_VALUE_SHIFT					16
-#define OMAP4430_SLPCNT_VALUE_MASK					BITFIELD(16, 23)
+#define OMAP4430_SLPCNT_VALUE_MASK					(0xff << 16)
 
 /* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
 #define OMAP4430_SMPSWAITTIMEMAX_SHIFT					8
-#define OMAP4430_SMPSWAITTIMEMAX_MASK					BITFIELD(8, 23)
+#define OMAP4430_SMPSWAITTIMEMAX_MASK					(0xffff << 8)
 
 /* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
 #define OMAP4430_SMPSWAITTIMEMIN_SHIFT					8
-#define OMAP4430_SMPSWAITTIMEMIN_MASK					BITFIELD(8, 23)
+#define OMAP4430_SMPSWAITTIMEMIN_MASK					(0xffff << 8)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_SMPS_RA_ERR_CORE_SHIFT					1
+#define OMAP4430_SMPS_RA_ERR_CORE_MASK					(1 << 1)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_SMPS_RA_ERR_IVA_SHIFT					9
+#define OMAP4430_SMPS_RA_ERR_IVA_MASK					(1 << 9)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_SMPS_RA_ERR_MPU_SHIFT					17
+#define OMAP4430_SMPS_RA_ERR_MPU_MASK					(1 << 17)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_SMPS_SA_ERR_CORE_SHIFT					0
+#define OMAP4430_SMPS_SA_ERR_CORE_MASK					(1 << 0)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_SMPS_SA_ERR_IVA_SHIFT					8
+#define OMAP4430_SMPS_SA_ERR_IVA_MASK					(1 << 8)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_SMPS_SA_ERR_MPU_SHIFT					16
+#define OMAP4430_SMPS_SA_ERR_MPU_MASK					(1 << 16)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_SMPS_TIMEOUT_ERR_CORE_SHIFT				2
+#define OMAP4430_SMPS_TIMEOUT_ERR_CORE_MASK				(1 << 2)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_SMPS_TIMEOUT_ERR_IVA_SHIFT				10
+#define OMAP4430_SMPS_TIMEOUT_ERR_IVA_MASK				(1 << 10)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_SMPS_TIMEOUT_ERR_MPU_SHIFT				18
+#define OMAP4430_SMPS_TIMEOUT_ERR_MPU_MASK				(1 << 18)
 
 /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
 #define OMAP4430_SR2EN_SHIFT						0
-#define OMAP4430_SR2EN_MASK						BITFIELD(0, 0)
+#define OMAP4430_SR2EN_MASK						(1 << 0)
 
 /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
 #define OMAP4430_SR2_IN_TRANSITION_SHIFT				6
-#define OMAP4430_SR2_IN_TRANSITION_MASK					BITFIELD(6, 6)
+#define OMAP4430_SR2_IN_TRANSITION_MASK					(1 << 6)
 
 /* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
 #define OMAP4430_SR2_STATUS_SHIFT					3
-#define OMAP4430_SR2_STATUS_MASK					BITFIELD(3, 4)
+#define OMAP4430_SR2_STATUS_MASK					(0x3 << 3)
 
 /* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
 #define OMAP4430_SR2_WTCNT_VALUE_SHIFT					8
-#define OMAP4430_SR2_WTCNT_VALUE_MASK					BITFIELD(8, 15)
+#define OMAP4430_SR2_WTCNT_VALUE_MASK					(0xff << 8)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
  * PRM_LDO_SRAM_MPU_CTRL
  */
 #define OMAP4430_SRAMLDO_STATUS_SHIFT					8
-#define OMAP4430_SRAMLDO_STATUS_MASK					BITFIELD(8, 8)
+#define OMAP4430_SRAMLDO_STATUS_MASK					(1 << 8)
 
 /*
  * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
  * PRM_LDO_SRAM_MPU_CTRL
  */
 #define OMAP4430_SRAM_IN_TRANSITION_SHIFT				9
-#define OMAP4430_SRAM_IN_TRANSITION_MASK				BITFIELD(9, 9)
+#define OMAP4430_SRAM_IN_TRANSITION_MASK				(1 << 9)
 
 /* Used by PRM_VC_CFG_I2C_MODE */
 #define OMAP4430_SRMODEEN_SHIFT						4
-#define OMAP4430_SRMODEEN_MASK						BITFIELD(4, 4)
+#define OMAP4430_SRMODEEN_MASK						(1 << 4)
 
 /* Used by PRM_VOLTSETUP_WARMRESET */
 #define OMAP4430_STABLE_COUNT_SHIFT					0
-#define OMAP4430_STABLE_COUNT_MASK					BITFIELD(0, 5)
+#define OMAP4430_STABLE_COUNT_MASK					(0x3f << 0)
 
 /* Used by PRM_VOLTSETUP_WARMRESET */
 #define OMAP4430_STABLE_PRESCAL_SHIFT					8
-#define OMAP4430_STABLE_PRESCAL_MASK					BITFIELD(8, 9)
+#define OMAP4430_STABLE_PRESCAL_MASK					(0x3 << 8)
+
+/* Used by PRM_LDO_BANDGAP_SETUP */
+#define OMAP4430_STARTUP_COUNT_SHIFT					0
+#define OMAP4430_STARTUP_COUNT_MASK					(0xff << 0)
+
+/* Renamed from STARTUP_COUNT Used by PRM_SRAM_COUNT */
+#define OMAP4430_STARTUP_COUNT_24_31_SHIFT				24
+#define OMAP4430_STARTUP_COUNT_24_31_MASK				(0xff << 24)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
 #define OMAP4430_TCM1_MEM_ONSTATE_SHIFT					20
-#define OMAP4430_TCM1_MEM_ONSTATE_MASK					BITFIELD(20, 21)
+#define OMAP4430_TCM1_MEM_ONSTATE_MASK					(0x3 << 20)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
 #define OMAP4430_TCM1_MEM_RETSTATE_SHIFT				10
-#define OMAP4430_TCM1_MEM_RETSTATE_MASK					BITFIELD(10, 10)
+#define OMAP4430_TCM1_MEM_RETSTATE_MASK					(1 << 10)
 
 /* Used by PM_IVAHD_PWRSTST */
 #define OMAP4430_TCM1_MEM_STATEST_SHIFT					8
-#define OMAP4430_TCM1_MEM_STATEST_MASK					BITFIELD(8, 9)
+#define OMAP4430_TCM1_MEM_STATEST_MASK					(0x3 << 8)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
 #define OMAP4430_TCM2_MEM_ONSTATE_SHIFT					22
-#define OMAP4430_TCM2_MEM_ONSTATE_MASK					BITFIELD(22, 23)
+#define OMAP4430_TCM2_MEM_ONSTATE_MASK					(0x3 << 22)
 
 /* Used by PM_IVAHD_PWRSTCTRL */
 #define OMAP4430_TCM2_MEM_RETSTATE_SHIFT				11
-#define OMAP4430_TCM2_MEM_RETSTATE_MASK					BITFIELD(11, 11)
+#define OMAP4430_TCM2_MEM_RETSTATE_MASK					(1 << 11)
 
 /* Used by PM_IVAHD_PWRSTST */
 #define OMAP4430_TCM2_MEM_STATEST_SHIFT					10
-#define OMAP4430_TCM2_MEM_STATEST_MASK					BITFIELD(10, 11)
+#define OMAP4430_TCM2_MEM_STATEST_MASK					(0x3 << 10)
 
 /* Used by RM_TESLA_RSTST */
 #define OMAP4430_TESLASS_EMU_RSTST_SHIFT				2
-#define OMAP4430_TESLASS_EMU_RSTST_MASK					BITFIELD(2, 2)
+#define OMAP4430_TESLASS_EMU_RSTST_MASK					(1 << 2)
 
 /* Used by RM_TESLA_RSTST */
 #define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT				3
-#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK				BITFIELD(3, 3)
+#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK				(1 << 3)
 
 /* Used by PM_TESLA_PWRSTCTRL */
 #define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT				20
-#define OMAP4430_TESLA_EDMA_ONSTATE_MASK				BITFIELD(20, 21)
+#define OMAP4430_TESLA_EDMA_ONSTATE_MASK				(0x3 << 20)
 
 /* Used by PM_TESLA_PWRSTCTRL */
 #define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT				10
-#define OMAP4430_TESLA_EDMA_RETSTATE_MASK				BITFIELD(10, 10)
+#define OMAP4430_TESLA_EDMA_RETSTATE_MASK				(1 << 10)
 
 /* Used by PM_TESLA_PWRSTST */
 #define OMAP4430_TESLA_EDMA_STATEST_SHIFT				8
-#define OMAP4430_TESLA_EDMA_STATEST_MASK				BITFIELD(8, 9)
+#define OMAP4430_TESLA_EDMA_STATEST_MASK				(0x3 << 8)
 
 /* Used by PM_TESLA_PWRSTCTRL */
 #define OMAP4430_TESLA_L1_ONSTATE_SHIFT					16
-#define OMAP4430_TESLA_L1_ONSTATE_MASK					BITFIELD(16, 17)
+#define OMAP4430_TESLA_L1_ONSTATE_MASK					(0x3 << 16)
 
 /* Used by PM_TESLA_PWRSTCTRL */
 #define OMAP4430_TESLA_L1_RETSTATE_SHIFT				8
-#define OMAP4430_TESLA_L1_RETSTATE_MASK					BITFIELD(8, 8)
+#define OMAP4430_TESLA_L1_RETSTATE_MASK					(1 << 8)
 
 /* Used by PM_TESLA_PWRSTST */
 #define OMAP4430_TESLA_L1_STATEST_SHIFT					4
-#define OMAP4430_TESLA_L1_STATEST_MASK					BITFIELD(4, 5)
+#define OMAP4430_TESLA_L1_STATEST_MASK					(0x3 << 4)
 
 /* Used by PM_TESLA_PWRSTCTRL */
 #define OMAP4430_TESLA_L2_ONSTATE_SHIFT					18
-#define OMAP4430_TESLA_L2_ONSTATE_MASK					BITFIELD(18, 19)
+#define OMAP4430_TESLA_L2_ONSTATE_MASK					(0x3 << 18)
 
 /* Used by PM_TESLA_PWRSTCTRL */
 #define OMAP4430_TESLA_L2_RETSTATE_SHIFT				9
-#define OMAP4430_TESLA_L2_RETSTATE_MASK					BITFIELD(9, 9)
+#define OMAP4430_TESLA_L2_RETSTATE_MASK					(1 << 9)
 
 /* Used by PM_TESLA_PWRSTST */
 #define OMAP4430_TESLA_L2_STATEST_SHIFT					6
-#define OMAP4430_TESLA_L2_STATEST_MASK					BITFIELD(6, 7)
+#define OMAP4430_TESLA_L2_STATEST_MASK					(0x3 << 6)
 
 /* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
 #define OMAP4430_TIMEOUT_SHIFT						0
-#define OMAP4430_TIMEOUT_MASK						BITFIELD(0, 15)
+#define OMAP4430_TIMEOUT_MASK						(0xffff << 0)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
 #define OMAP4430_TIMEOUTEN_SHIFT					3
-#define OMAP4430_TIMEOUTEN_MASK						BITFIELD(3, 3)
+#define OMAP4430_TIMEOUTEN_MASK						(1 << 3)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_TRANSITION_EN_SHIFT					8
-#define OMAP4430_TRANSITION_EN_MASK					BITFIELD(8, 8)
+#define OMAP4430_TRANSITION_EN_MASK					(1 << 8)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_TRANSITION_ST_SHIFT					8
-#define OMAP4430_TRANSITION_ST_MASK					BITFIELD(8, 8)
+#define OMAP4430_TRANSITION_ST_MASK					(1 << 8)
 
 /* Used by PRM_VC_VAL_BYPASS */
 #define OMAP4430_VALID_SHIFT						24
-#define OMAP4430_VALID_MASK						BITFIELD(24, 24)
+#define OMAP4430_VALID_MASK						(1 << 24)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VC_BYPASSACK_EN_SHIFT					14
-#define OMAP4430_VC_BYPASSACK_EN_MASK					BITFIELD(14, 14)
+#define OMAP4430_VC_BYPASSACK_EN_MASK					(1 << 14)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VC_BYPASSACK_ST_SHIFT					14
-#define OMAP4430_VC_BYPASSACK_ST_MASK					BITFIELD(14, 14)
+#define OMAP4430_VC_BYPASSACK_ST_MASK					(1 << 14)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VC_CORE_VPACK_EN_SHIFT					22
+#define OMAP4430_VC_CORE_VPACK_EN_MASK					(1 << 22)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VC_CORE_VPACK_ST_SHIFT					22
+#define OMAP4430_VC_CORE_VPACK_ST_MASK					(1 << 22)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VC_IVA_VPACK_EN_SHIFT					30
-#define OMAP4430_VC_IVA_VPACK_EN_MASK					BITFIELD(30, 30)
+#define OMAP4430_VC_IVA_VPACK_EN_MASK					(1 << 30)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VC_IVA_VPACK_ST_SHIFT					30
-#define OMAP4430_VC_IVA_VPACK_ST_MASK					BITFIELD(30, 30)
+#define OMAP4430_VC_IVA_VPACK_ST_MASK					(1 << 30)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
 #define OMAP4430_VC_MPU_VPACK_EN_SHIFT					6
-#define OMAP4430_VC_MPU_VPACK_EN_MASK					BITFIELD(6, 6)
+#define OMAP4430_VC_MPU_VPACK_EN_MASK					(1 << 6)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
 #define OMAP4430_VC_MPU_VPACK_ST_SHIFT					6
-#define OMAP4430_VC_MPU_VPACK_ST_MASK					BITFIELD(6, 6)
+#define OMAP4430_VC_MPU_VPACK_ST_MASK					(1 << 6)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VC_RAERR_EN_SHIFT					12
-#define OMAP4430_VC_RAERR_EN_MASK					BITFIELD(12, 12)
+#define OMAP4430_VC_RAERR_EN_MASK					(1 << 12)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VC_RAERR_ST_SHIFT					12
-#define OMAP4430_VC_RAERR_ST_MASK					BITFIELD(12, 12)
+#define OMAP4430_VC_RAERR_ST_MASK					(1 << 12)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VC_SAERR_EN_SHIFT					11
-#define OMAP4430_VC_SAERR_EN_MASK					BITFIELD(11, 11)
+#define OMAP4430_VC_SAERR_EN_MASK					(1 << 11)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VC_SAERR_ST_SHIFT					11
-#define OMAP4430_VC_SAERR_ST_MASK					BITFIELD(11, 11)
+#define OMAP4430_VC_SAERR_ST_MASK					(1 << 11)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VC_TOERR_EN_SHIFT					13
-#define OMAP4430_VC_TOERR_EN_MASK					BITFIELD(13, 13)
+#define OMAP4430_VC_TOERR_EN_MASK					(1 << 13)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VC_TOERR_ST_SHIFT					13
-#define OMAP4430_VC_TOERR_ST_MASK					BITFIELD(13, 13)
+#define OMAP4430_VC_TOERR_ST_MASK					(1 << 13)
 
 /* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
 #define OMAP4430_VDDMAX_SHIFT						24
-#define OMAP4430_VDDMAX_MASK						BITFIELD(24, 31)
+#define OMAP4430_VDDMAX_MASK						(0xff << 24)
 
 /* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
 #define OMAP4430_VDDMIN_SHIFT						16
-#define OMAP4430_VDDMIN_MASK						BITFIELD(16, 23)
+#define OMAP4430_VDDMIN_MASK						(0xff << 16)
 
 /* Used by PRM_VOLTCTRL */
 #define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT				12
-#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK				BITFIELD(12, 12)
+#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK				(1 << 12)
 
 /* Used by PRM_RSTST */
 #define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT				8
-#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK				BITFIELD(8, 8)
+#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK				(1 << 8)
 
 /* Used by PRM_VOLTCTRL */
 #define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT				14
-#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK				BITFIELD(14, 14)
+#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK				(1 << 14)
 
 /* Used by PRM_VOLTCTRL */
 #define OMAP4430_VDD_IVA_PRESENCE_SHIFT					9
-#define OMAP4430_VDD_IVA_PRESENCE_MASK					BITFIELD(9, 9)
+#define OMAP4430_VDD_IVA_PRESENCE_MASK					(1 << 9)
 
 /* Used by PRM_RSTST */
 #define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT				7
-#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK				BITFIELD(7, 7)
+#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK				(1 << 7)
 
 /* Used by PRM_VOLTCTRL */
 #define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT				13
-#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK				BITFIELD(13, 13)
+#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK				(1 << 13)
 
 /* Used by PRM_VOLTCTRL */
 #define OMAP4430_VDD_MPU_PRESENCE_SHIFT					8
-#define OMAP4430_VDD_MPU_PRESENCE_MASK					BITFIELD(8, 8)
+#define OMAP4430_VDD_MPU_PRESENCE_MASK					(1 << 8)
 
 /* Used by PRM_RSTST */
 #define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT				6
-#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK				BITFIELD(6, 6)
+#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK				(1 << 6)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_VFSM_RA_ERR_CORE_SHIFT					4
+#define OMAP4430_VFSM_RA_ERR_CORE_MASK					(1 << 4)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_VFSM_RA_ERR_IVA_SHIFT					12
+#define OMAP4430_VFSM_RA_ERR_IVA_MASK					(1 << 12)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_VFSM_RA_ERR_MPU_SHIFT					20
+#define OMAP4430_VFSM_RA_ERR_MPU_MASK					(1 << 20)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_VFSM_SA_ERR_CORE_SHIFT					3
+#define OMAP4430_VFSM_SA_ERR_CORE_MASK					(1 << 3)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_VFSM_SA_ERR_IVA_SHIFT					11
+#define OMAP4430_VFSM_SA_ERR_IVA_MASK					(1 << 11)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_VFSM_SA_ERR_MPU_SHIFT					19
+#define OMAP4430_VFSM_SA_ERR_MPU_MASK					(1 << 19)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_VFSM_TIMEOUT_ERR_CORE_SHIFT				5
+#define OMAP4430_VFSM_TIMEOUT_ERR_CORE_MASK				(1 << 5)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_VFSM_TIMEOUT_ERR_IVA_SHIFT				13
+#define OMAP4430_VFSM_TIMEOUT_ERR_IVA_MASK				(1 << 13)
+
+/* Used by PRM_VC_ERRST */
+#define OMAP4430_VFSM_TIMEOUT_ERR_MPU_SHIFT				21
+#define OMAP4430_VFSM_TIMEOUT_ERR_MPU_MASK				(1 << 21)
 
 /* Used by PRM_VC_VAL_SMPS_RA_VOL */
 #define OMAP4430_VOLRA_VDD_CORE_L_SHIFT					0
-#define OMAP4430_VOLRA_VDD_CORE_L_MASK					BITFIELD(0, 7)
+#define OMAP4430_VOLRA_VDD_CORE_L_MASK					(0xff << 0)
 
 /* Used by PRM_VC_VAL_SMPS_RA_VOL */
 #define OMAP4430_VOLRA_VDD_IVA_L_SHIFT					8
-#define OMAP4430_VOLRA_VDD_IVA_L_MASK					BITFIELD(8, 15)
+#define OMAP4430_VOLRA_VDD_IVA_L_MASK					(0xff << 8)
 
 /* Used by PRM_VC_VAL_SMPS_RA_VOL */
 #define OMAP4430_VOLRA_VDD_MPU_L_SHIFT					16
-#define OMAP4430_VOLRA_VDD_MPU_L_MASK					BITFIELD(16, 23)
+#define OMAP4430_VOLRA_VDD_MPU_L_MASK					(0xff << 16)
 
 /* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
 #define OMAP4430_VPENABLE_SHIFT						0
-#define OMAP4430_VPENABLE_MASK						BITFIELD(0, 0)
+#define OMAP4430_VPENABLE_MASK						(1 << 0)
 
 /* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */
 #define OMAP4430_VPINIDLE_SHIFT						0
-#define OMAP4430_VPINIDLE_MASK						BITFIELD(0, 0)
+#define OMAP4430_VPINIDLE_MASK						(1 << 0)
 
 /* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
 #define OMAP4430_VPVOLTAGE_SHIFT					0
-#define OMAP4430_VPVOLTAGE_MASK						BITFIELD(0, 7)
+#define OMAP4430_VPVOLTAGE_MASK						(0xff << 0)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT				20
-#define OMAP4430_VP_CORE_EQVALUE_EN_MASK				BITFIELD(20, 20)
+#define OMAP4430_VP_CORE_EQVALUE_EN_MASK				(1 << 20)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT				20
-#define OMAP4430_VP_CORE_EQVALUE_ST_MASK				BITFIELD(20, 20)
+#define OMAP4430_VP_CORE_EQVALUE_ST_MASK				(1 << 20)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT				18
-#define OMAP4430_VP_CORE_MAXVDD_EN_MASK					BITFIELD(18, 18)
+#define OMAP4430_VP_CORE_MAXVDD_EN_MASK					(1 << 18)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT				18
-#define OMAP4430_VP_CORE_MAXVDD_ST_MASK					BITFIELD(18, 18)
+#define OMAP4430_VP_CORE_MAXVDD_ST_MASK					(1 << 18)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_CORE_MINVDD_EN_SHIFT				17
-#define OMAP4430_VP_CORE_MINVDD_EN_MASK					BITFIELD(17, 17)
+#define OMAP4430_VP_CORE_MINVDD_EN_MASK					(1 << 17)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_CORE_MINVDD_ST_SHIFT				17
-#define OMAP4430_VP_CORE_MINVDD_ST_MASK					BITFIELD(17, 17)
+#define OMAP4430_VP_CORE_MINVDD_ST_MASK					(1 << 17)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT				19
-#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK				BITFIELD(19, 19)
+#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK				(1 << 19)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT				19
-#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK				BITFIELD(19, 19)
+#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK				(1 << 19)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT				16
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK				BITFIELD(16, 16)
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK				(1 << 16)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT				16
-#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK				BITFIELD(16, 16)
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK				(1 << 16)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT				21
-#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK				BITFIELD(21, 21)
+#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK				(1 << 21)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT				21
-#define OMAP4430_VP_CORE_TRANXDONE_ST_MASK				BITFIELD(21, 21)
+#define OMAP4430_VP_CORE_TRANXDONE_ST_MASK				(1 << 21)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT				28
-#define OMAP4430_VP_IVA_EQVALUE_EN_MASK					BITFIELD(28, 28)
+#define OMAP4430_VP_IVA_EQVALUE_EN_MASK					(1 << 28)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT				28
-#define OMAP4430_VP_IVA_EQVALUE_ST_MASK					BITFIELD(28, 28)
+#define OMAP4430_VP_IVA_EQVALUE_ST_MASK					(1 << 28)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT					26
-#define OMAP4430_VP_IVA_MAXVDD_EN_MASK					BITFIELD(26, 26)
+#define OMAP4430_VP_IVA_MAXVDD_EN_MASK					(1 << 26)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT					26
-#define OMAP4430_VP_IVA_MAXVDD_ST_MASK					BITFIELD(26, 26)
+#define OMAP4430_VP_IVA_MAXVDD_ST_MASK					(1 << 26)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_IVA_MINVDD_EN_SHIFT					25
-#define OMAP4430_VP_IVA_MINVDD_EN_MASK					BITFIELD(25, 25)
+#define OMAP4430_VP_IVA_MINVDD_EN_MASK					(1 << 25)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_IVA_MINVDD_ST_SHIFT					25
-#define OMAP4430_VP_IVA_MINVDD_ST_MASK					BITFIELD(25, 25)
+#define OMAP4430_VP_IVA_MINVDD_ST_MASK					(1 << 25)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT				27
-#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK				BITFIELD(27, 27)
+#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK				(1 << 27)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT				27
-#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK				BITFIELD(27, 27)
+#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK				(1 << 27)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT				24
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK				BITFIELD(24, 24)
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK				(1 << 24)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT				24
-#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK				BITFIELD(24, 24)
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK				(1 << 24)
 
 /* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
 #define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT				29
-#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK				BITFIELD(29, 29)
+#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK				(1 << 29)
 
 /* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
 #define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT				29
-#define OMAP4430_VP_IVA_TRANXDONE_ST_MASK				BITFIELD(29, 29)
+#define OMAP4430_VP_IVA_TRANXDONE_ST_MASK				(1 << 29)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
 #define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT				4
-#define OMAP4430_VP_MPU_EQVALUE_EN_MASK					BITFIELD(4, 4)
+#define OMAP4430_VP_MPU_EQVALUE_EN_MASK					(1 << 4)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
 #define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT				4
-#define OMAP4430_VP_MPU_EQVALUE_ST_MASK					BITFIELD(4, 4)
+#define OMAP4430_VP_MPU_EQVALUE_ST_MASK					(1 << 4)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
 #define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT					2
-#define OMAP4430_VP_MPU_MAXVDD_EN_MASK					BITFIELD(2, 2)
+#define OMAP4430_VP_MPU_MAXVDD_EN_MASK					(1 << 2)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
 #define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT					2
-#define OMAP4430_VP_MPU_MAXVDD_ST_MASK					BITFIELD(2, 2)
+#define OMAP4430_VP_MPU_MAXVDD_ST_MASK					(1 << 2)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
 #define OMAP4430_VP_MPU_MINVDD_EN_SHIFT					1
-#define OMAP4430_VP_MPU_MINVDD_EN_MASK					BITFIELD(1, 1)
+#define OMAP4430_VP_MPU_MINVDD_EN_MASK					(1 << 1)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
 #define OMAP4430_VP_MPU_MINVDD_ST_SHIFT					1
-#define OMAP4430_VP_MPU_MINVDD_ST_MASK					BITFIELD(1, 1)
+#define OMAP4430_VP_MPU_MINVDD_ST_MASK					(1 << 1)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
 #define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT				3
-#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK				BITFIELD(3, 3)
+#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK				(1 << 3)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
 #define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT				3
-#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK				BITFIELD(3, 3)
+#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK				(1 << 3)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
 #define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT				0
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK				BITFIELD(0, 0)
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK				(1 << 0)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
 #define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT				0
-#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK				BITFIELD(0, 0)
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK				(1 << 0)
 
 /* Used by PRM_IRQENABLE_MPU_2 */
 #define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT				5
-#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK				BITFIELD(5, 5)
+#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK				(1 << 5)
 
 /* Used by PRM_IRQSTATUS_MPU_2 */
 #define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT				5
-#define OMAP4430_VP_MPU_TRANXDONE_ST_MASK				BITFIELD(5, 5)
+#define OMAP4430_VP_MPU_TRANXDONE_ST_MASK				(1 << 5)
 
 /* Used by PRM_SRAM_COUNT */
 #define OMAP4430_VSETUPCNT_VALUE_SHIFT					8
-#define OMAP4430_VSETUPCNT_VALUE_MASK					BITFIELD(8, 15)
+#define OMAP4430_VSETUPCNT_VALUE_MASK					(0xff << 8)
 
 /* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
 #define OMAP4430_VSTEPMAX_SHIFT						0
-#define OMAP4430_VSTEPMAX_MASK						BITFIELD(0, 7)
+#define OMAP4430_VSTEPMAX_MASK						(0xff << 0)
 
 /* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
 #define OMAP4430_VSTEPMIN_SHIFT						0
-#define OMAP4430_VSTEPMIN_MASK						BITFIELD(0, 7)
+#define OMAP4430_VSTEPMIN_MASK						(0xff << 0)
 
 /* Used by PRM_MODEM_IF_CTRL */
 #define OMAP4430_WAKE_MODEM_SHIFT					0
-#define OMAP4430_WAKE_MODEM_MASK					BITFIELD(0, 0)
+#define OMAP4430_WAKE_MODEM_MASK					(1 << 0)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DISPC_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_DISPC_MPU_MASK					(1 << 0)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK				(1 << 3)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK				(1 << 2)
 
 /* Used by PM_ABE_DMIC_WKDEP */
 #define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_ABE_DMIC_WKDEP */
 #define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK				(1 << 6)
 
 /* Used by PM_ABE_DMIC_WKDEP */
 #define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_DMIC_WKDEP */
 #define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK				(1 << 2)
 
 /* Used by PM_L4PER_DMTIMER10_WKDEP */
 #define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_DMTIMER11_WKDEP */
 #define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_DMTIMER11_WKDEP */
 #define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_DMTIMER2_WKDEP */
 #define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_DMTIMER3_WKDEP */
 #define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_DMTIMER3_WKDEP */
 #define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_DMTIMER4_WKDEP */
 #define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_DMTIMER4_WKDEP */
 #define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_DMTIMER9_WKDEP */
 #define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_DMTIMER9_WKDEP */
 #define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK				(1 << 0)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT				5
-#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK				BITFIELD(5, 5)
+#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK				(1 << 5)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT					4
-#define OMAP4430_WKUPDEP_DSI1_MPU_MASK					BITFIELD(4, 4)
+#define OMAP4430_WKUPDEP_DSI1_MPU_MASK					(1 << 4)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK					BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK					(1 << 7)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK				(1 << 6)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT				9
-#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK				BITFIELD(9, 9)
+#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK				(1 << 9)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT					8
-#define OMAP4430_WKUPDEP_DSI2_MPU_MASK					BITFIELD(8, 8)
+#define OMAP4430_WKUPDEP_DSI2_MPU_MASK					(1 << 8)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT				11
-#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK					BITFIELD(11, 11)
+#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK					(1 << 11)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT				10
-#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK				BITFIELD(10, 10)
+#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK				(1 << 10)
 
 /* Used by PM_WKUP_GPIO1_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_WKUP_GPIO1_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK				(1 << 0)
 
 /* Used by PM_WKUP_GPIO1_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK				(1 << 6)
 
 /* Used by PM_L4PER_GPIO2_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_GPIO2_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_GPIO2_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK				(1 << 6)
 
 /* Used by PM_L4PER_GPIO3_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_GPIO3_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK				(1 << 6)
 
 /* Used by PM_L4PER_GPIO4_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_GPIO4_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK				(1 << 6)
 
 /* Used by PM_L4PER_GPIO5_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_GPIO5_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK				(1 << 6)
 
 /* Used by PM_L4PER_GPIO6_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_GPIO6_WKDEP */
 #define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK				(1 << 6)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT				19
-#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK				BITFIELD(19, 19)
+#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK				(1 << 19)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT				13
-#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK				BITFIELD(13, 13)
+#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK				(1 << 13)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT				12
-#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK				BITFIELD(12, 12)
+#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK				(1 << 12)
 
 /* Used by PM_DSS_DSS_WKDEP */
 #define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT				14
-#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK				BITFIELD(14, 14)
+#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK				(1 << 14)
 
 /* Used by PM_L4PER_HECC1_WKDEP */
 #define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HECC1_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_HECC1_MPU_MASK					(1 << 0)
 
 /* Used by PM_L4PER_HECC2_WKDEP */
 #define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HECC2_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_HECC2_MPU_MASK					(1 << 0)
 
 /* Used by PM_L3INIT_HSI_WKDEP */
 #define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK				(1 << 6)
 
 /* Used by PM_L3INIT_HSI_WKDEP */
 #define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L3INIT_HSI_WKDEP */
 #define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_I2C1_WKDEP */
 #define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_L4PER_I2C1_WKDEP */
 #define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_I2C1_WKDEP */
 #define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_I2C2_WKDEP */
 #define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_L4PER_I2C2_WKDEP */
 #define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_I2C2_WKDEP */
 #define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_I2C3_WKDEP */
 #define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_L4PER_I2C3_WKDEP */
 #define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_I2C3_WKDEP */
 #define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_I2C4_WKDEP */
 #define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_L4PER_I2C4_WKDEP */
 #define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_I2C4_WKDEP */
 #define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_I2C5_WKDEP */
 #define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_L4PER_I2C5_WKDEP */
 #define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_WKUP_KEYBOARD_WKDEP */
 #define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_MCASP_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_ABE_MCASP_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK				(1 << 6)
 
 /* Used by PM_ABE_MCASP_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_MCASP_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK				(1 << 2)
 
 /* Used by PM_L4PER_MCASP2_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_L4PER_MCASP2_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK				(1 << 6)
 
 /* Used by PM_L4PER_MCASP2_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_MCASP2_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK				(1 << 2)
 
 /* Used by PM_L4PER_MCASP3_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_L4PER_MCASP3_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK				(1 << 6)
 
 /* Used by PM_L4PER_MCASP3_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_MCASP3_WKDEP */
 #define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK				(1 << 2)
 
 /* Used by PM_ABE_MCBSP1_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_MCBSP1_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK				(1 << 3)
 
 /* Used by PM_ABE_MCBSP1_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK				(1 << 2)
 
 /* Used by PM_ABE_MCBSP2_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_MCBSP2_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK				(1 << 3)
 
 /* Used by PM_ABE_MCBSP2_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK				(1 << 2)
 
 /* Used by PM_ABE_MCBSP3_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_MCBSP3_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK				(1 << 3)
 
 /* Used by PM_ABE_MCBSP3_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK				(1 << 2)
 
 /* Used by PM_L4PER_MCBSP4_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_MCBSP4_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L4PER_MCBSP4_WKDEP */
 #define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK				(1 << 2)
 
 /* Used by PM_L4PER_MCSPI1_WKDEP */
 #define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_MCSPI1_WKDEP */
 #define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_MCSPI1_WKDEP */
 #define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L4PER_MCSPI1_WKDEP */
 #define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK				(1 << 2)
 
 /* Used by PM_L4PER_MCSPI2_WKDEP */
 #define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_MCSPI2_WKDEP */
 #define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_MCSPI2_WKDEP */
 #define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L4PER_MCSPI3_WKDEP */
 #define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_MCSPI3_WKDEP */
 #define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L4PER_MCSPI4_WKDEP */
 #define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_MCSPI4_WKDEP */
 #define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L3INIT_MMC1_WKDEP */
 #define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L3INIT_MMC1_WKDEP */
 #define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC1_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MMC1_MPU_MASK					(1 << 0)
 
 /* Used by PM_L3INIT_MMC1_WKDEP */
 #define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK					BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK					(1 << 3)
 
 /* Used by PM_L3INIT_MMC1_WKDEP */
 #define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK				(1 << 2)
 
 /* Used by PM_L3INIT_MMC2_WKDEP */
 #define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L3INIT_MMC2_WKDEP */
 #define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC2_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MMC2_MPU_MASK					(1 << 0)
 
 /* Used by PM_L3INIT_MMC2_WKDEP */
 #define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK					BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK					(1 << 3)
 
 /* Used by PM_L3INIT_MMC2_WKDEP */
 #define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK				(1 << 2)
 
 /* Used by PM_L3INIT_MMC6_WKDEP */
 #define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L3INIT_MMC6_WKDEP */
 #define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_MMC6_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MMC6_MPU_MASK					(1 << 0)
 
 /* Used by PM_L3INIT_MMC6_WKDEP */
 #define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK				(1 << 2)
 
 /* Used by PM_L4PER_MMCSD3_WKDEP */
 #define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_MMCSD3_WKDEP */
 #define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_MMCSD3_WKDEP */
 #define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L4PER_MMCSD4_WKDEP */
 #define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_MMCSD4_WKDEP */
 #define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_MMCSD4_WKDEP */
 #define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L4PER_MMCSD5_WKDEP */
 #define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_MMCSD5_WKDEP */
 #define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_MMCSD5_WKDEP */
 #define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L3INIT_PCIESS_WKDEP */
 #define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK				(1 << 0)
 
 /* Used by PM_L3INIT_PCIESS_WKDEP */
 #define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK				(1 << 2)
 
 /* Used by PM_ABE_PDM_WKDEP */
 #define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT				7
-#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_ABE_PDM_WKDEP */
 #define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT				6
-#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK				BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK				(1 << 6)
 
 /* Used by PM_ABE_PDM_WKDEP */
 #define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_PDM_WKDEP */
 #define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK				(1 << 2)
 
 /* Used by PM_WKUP_RTC_WKDEP */
 #define OMAP4430_WKUPDEP_RTC_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_RTC_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_RTC_MPU_MASK					(1 << 0)
 
 /* Used by PM_L3INIT_SATA_WKDEP */
 #define OMAP4430_WKUPDEP_SATA_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_SATA_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_SATA_MPU_MASK					(1 << 0)
 
 /* Used by PM_L3INIT_SATA_WKDEP */
 #define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_SATA_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_SATA_TESLA_MASK				(1 << 2)
 
 /* Used by PM_ABE_SLIMBUS_WKDEP */
 #define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT			7
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_ABE_SLIMBUS_WKDEP */
 #define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT			6
-#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK			BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK			(1 << 6)
 
 /* Used by PM_ABE_SLIMBUS_WKDEP */
 #define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_SLIMBUS_WKDEP */
 #define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT			2
-#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK			BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK			(1 << 2)
 
 /* Used by PM_L4PER_SLIMBUS2_WKDEP */
 #define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT			7
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK				BITFIELD(7, 7)
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK				(1 << 7)
 
 /* Used by PM_L4PER_SLIMBUS2_WKDEP */
 #define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT			6
-#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK			BITFIELD(6, 6)
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK			(1 << 6)
 
 /* Used by PM_L4PER_SLIMBUS2_WKDEP */
 #define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK				(1 << 0)
 
 /* Used by PM_L4PER_SLIMBUS2_WKDEP */
 #define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT			2
-#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK			BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK			(1 << 2)
 
 /* Used by PM_ALWON_SR_CORE_WKDEP */
 #define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_ALWON_SR_CORE_WKDEP */
 #define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK				(1 << 0)
 
 /* Used by PM_ALWON_SR_IVA_WKDEP */
 #define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_ALWON_SR_IVA_WKDEP */
 #define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK				(1 << 0)
 
 /* Used by PM_ALWON_SR_MPU_WKDEP */
 #define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK				(1 << 0)
 
 /* Used by PM_WKUP_TIMER12_WKDEP */
 #define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK				(1 << 0)
 
 /* Used by PM_WKUP_TIMER1_WKDEP */
 #define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_TIMER5_WKDEP */
 #define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_TIMER5_WKDEP */
 #define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK				(1 << 2)
 
 /* Used by PM_ABE_TIMER6_WKDEP */
 #define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_TIMER6_WKDEP */
 #define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK				(1 << 2)
 
 /* Used by PM_ABE_TIMER7_WKDEP */
 #define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_TIMER7_WKDEP */
 #define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK				(1 << 2)
 
 /* Used by PM_ABE_TIMER8_WKDEP */
 #define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK				(1 << 0)
 
 /* Used by PM_ABE_TIMER8_WKDEP */
 #define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK				(1 << 2)
 
 /* Used by PM_L4PER_UART1_WKDEP */
 #define OMAP4430_WKUPDEP_UART1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART1_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_UART1_MPU_MASK					(1 << 0)
 
 /* Used by PM_L4PER_UART1_WKDEP */
 #define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART1_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_UART1_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L4PER_UART2_WKDEP */
 #define OMAP4430_WKUPDEP_UART2_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART2_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_UART2_MPU_MASK					(1 << 0)
 
 /* Used by PM_L4PER_UART2_WKDEP */
 #define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART2_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_UART2_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L4PER_UART3_WKDEP */
 #define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L4PER_UART3_WKDEP */
 #define OMAP4430_WKUPDEP_UART3_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART3_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_UART3_MPU_MASK					(1 << 0)
 
 /* Used by PM_L4PER_UART3_WKDEP */
 #define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART3_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_UART3_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L4PER_UART3_WKDEP */
 #define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT				2
-#define OMAP4430_WKUPDEP_UART3_TESLA_MASK				BITFIELD(2, 2)
+#define OMAP4430_WKUPDEP_UART3_TESLA_MASK				(1 << 2)
 
 /* Used by PM_L4PER_UART4_WKDEP */
 #define OMAP4430_WKUPDEP_UART4_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UART4_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_UART4_MPU_MASK					(1 << 0)
 
 /* Used by PM_L4PER_UART4_WKDEP */
 #define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_UART4_SDMA_MASK				BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_UART4_SDMA_MASK				(1 << 3)
 
 /* Used by PM_L3INIT_UNIPRO1_WKDEP */
 #define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L3INIT_UNIPRO1_WKDEP */
 #define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK				(1 << 0)
 
 /* Used by PM_L3INIT_USB_HOST_WKDEP */
 #define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
 #define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT			1
-#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK			BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK			(1 << 1)
 
 /* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
 #define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK				(1 << 0)
 
 /* Used by PM_L3INIT_USB_HOST_WKDEP */
 #define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK				(1 << 0)
 
 /* Used by PM_L3INIT_USB_OTG_WKDEP */
 #define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L3INIT_USB_OTG_WKDEP */
 #define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK				(1 << 0)
 
 /* Used by PM_L3INIT_USB_TLL_WKDEP */
 #define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_L3INIT_USB_TLL_WKDEP */
 #define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT				0
-#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK				BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK				(1 << 0)
 
 /* Used by PM_WKUP_USIM_WKDEP */
 #define OMAP4430_WKUPDEP_USIM_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_USIM_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_USIM_MPU_MASK					(1 << 0)
 
 /* Used by PM_WKUP_USIM_WKDEP */
 #define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT				3
-#define OMAP4430_WKUPDEP_USIM_SDMA_MASK					BITFIELD(3, 3)
+#define OMAP4430_WKUPDEP_USIM_SDMA_MASK					(1 << 3)
 
 /* Used by PM_WKUP_WDT2_WKDEP */
 #define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK				(1 << 1)
 
 /* Used by PM_WKUP_WDT2_WKDEP */
 #define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_WDT2_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_WDT2_MPU_MASK					(1 << 0)
 
 /* Used by PM_ABE_WDT3_WKDEP */
 #define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT					0
-#define OMAP4430_WKUPDEP_WDT3_MPU_MASK					BITFIELD(0, 0)
+#define OMAP4430_WKUPDEP_WDT3_MPU_MASK					(1 << 0)
 
 /* Used by PM_L3INIT_HSI_WKDEP */
 #define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT				8
-#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK				BITFIELD(8, 8)
+#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK				(1 << 8)
 
 /* Used by PM_L3INIT_XHPI_WKDEP */
 #define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT				1
-#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK				BITFIELD(1, 1)
+#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK				(1 << 1)
 
 /* Used by PRM_IO_PMCTRL */
 #define OMAP4430_WUCLK_CTRL_SHIFT					8
-#define OMAP4430_WUCLK_CTRL_MASK					BITFIELD(8, 8)
+#define OMAP4430_WUCLK_CTRL_MASK					(1 << 8)
 
 /* Used by PRM_IO_PMCTRL */
 #define OMAP4430_WUCLK_STATUS_SHIFT					9
-#define OMAP4430_WUCLK_STATUS_MASK					BITFIELD(9, 9)
+#define OMAP4430_WUCLK_STATUS_MASK					(1 << 9)
+
+/* Used by REVISION_PRM */
+#define OMAP4430_X_MAJOR_SHIFT						8
+#define OMAP4430_X_MAJOR_MASK						(0x7 << 8)
+
+/* Used by REVISION_PRM */
+#define OMAP4430_Y_MINOR_SHIFT						0
+#define OMAP4430_Y_MINOR_MASK						(0x3f << 0)
 #endif
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 588873b9303a..7be040b2fdab 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -5,7 +5,7 @@
  * OMAP2/3 Power/Reset Management (PRM) register definitions
  *
  * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2010 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -246,6 +246,15 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 	return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
 }
 
+/* These omap2_ PRM functions apply to both OMAP2 and 3 */
+int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
+int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
+int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
+
+int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift);
+int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift);
+int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift);
+
 #endif
 
 /*
@@ -398,4 +407,11 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 #define OMAP_POWERSTATE_MASK				(0x3 << 0)
 
 
+/*
+ * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
+ * submodule to exit hardreset
+ */
+#define MAX_MODULE_HARDRESET_WAIT		10000
+
+
 #endif
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
new file mode 100644
index 000000000000..421771eee450
--- /dev/null
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -0,0 +1,110 @@
+/*
+ * OMAP2/3 PRM module functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <plat/common.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "prm-regbits-34xx.h"
+
+/**
+ * omap2_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to check
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL if called while running on a non-OMAP2/3 chip.
+ */
+int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+{
+	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+		return -EINVAL;
+
+	return prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
+				       (1 << shift));
+}
+
+/**
+ * omap2_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to assert
+ *
+ * Some IPs like dsp or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * place the submodule into reset.  Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+{
+	u32 mask;
+
+	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+		return -EINVAL;
+
+	mask = 1 << shift;
+	prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
+
+	return 0;
+}
+
+/**
+ * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to deassert
+ *
+ * Some IPs like dsp or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning.  Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
+{
+	u32 mask;
+	int c;
+
+	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+		return -EINVAL;
+
+	mask = 1 << shift;
+
+	/* Check the current status to avoid de-asserting the line twice */
+	if (prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0)
+		return -EEXIST;
+
+	/* Clear the reset status by writing 1 to the status bit */
+	prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST);
+	/* de-assert the reset control line */
+	prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL);
+	/* wait the status to be set */
+	omap_test_timeout(prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
+						  mask),
+			  MAX_MODULE_HARDRESET_WAIT, c);
+
+	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
+
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
new file mode 100644
index 000000000000..a1ff918d9bed
--- /dev/null
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -0,0 +1,116 @@
+/*
+ * OMAP4 PRM module functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <plat/common.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
+
+#include "prm.h"
+#include "prm-regbits-44xx.h"
+
+/*
+ * Address offset (in bytes) between the reset control and the reset
+ * status registers: 4 bytes on OMAP4
+ */
+#define OMAP4_RST_CTRL_ST_OFFSET		4
+
+/**
+ * omap4_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to check
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL upon parameter error.
+ */
+int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift)
+{
+	if (!cpu_is_omap44xx() || !rstctrl_reg)
+		return -EINVAL;
+
+	return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift));
+}
+
+/**
+ * omap4_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to assert
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * place the submodule into reset.  Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift)
+{
+	u32 mask;
+
+	if (!cpu_is_omap44xx() || !rstctrl_reg)
+		return -EINVAL;
+
+	mask = 1 << shift;
+	omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg);
+
+	return 0;
+}
+
+/**
+ * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to deassert
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning.  Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift)
+{
+	u32 mask;
+	void __iomem *rstst_reg;
+	int c;
+
+	if (!cpu_is_omap44xx() || !rstctrl_reg)
+		return -EINVAL;
+
+	rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET;
+
+	mask = 1 << shift;
+
+	/* Check the current status to avoid de-asserting the line twice */
+	if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0)
+		return -EEXIST;
+
+	/* Clear the reset status by writing 1 to the status bit */
+	omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg);
+	/* de-assert the reset control line */
+	omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg);
+	/* wait the status to be set */
+	omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask),
+			  MAX_MODULE_HARDRESET_WAIT, c);
+
+	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
+
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index fe8ef26431e5..59839dbabd84 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -44,14 +44,12 @@
 #define OMAP4430_PRM_IRQSTATUS_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030)
 #define OMAP4_PRM_IRQENABLE_TESLA_OFFSET		0x0038
 #define OMAP4430_PRM_IRQENABLE_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038)
-#define OMAP4_PRM_PRM_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_PRM_PRM_PROFILING_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040)
+#define OMAP4_CM_PRM_PROFILING_CLKCTRL_OFFSET		0x0040
+#define OMAP4430_CM_PRM_PROFILING_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040)
 
 /* PRM.CKGEN_PRM register offsets */
 #define OMAP4_CM_ABE_DSS_SYS_CLKSEL_OFFSET		0x0000
 #define OMAP4430_CM_ABE_DSS_SYS_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000)
-#define OMAP4_CM_DPLL_SYS_REF_CLKSEL_OFFSET		0x0004
-#define OMAP4430_CM_DPLL_SYS_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0004)
 #define OMAP4_CM_L4_WKUP_CLKSEL_OFFSET			0x0008
 #define OMAP4430_CM_L4_WKUP_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008)
 #define OMAP4_CM_ABE_PLL_REF_CLKSEL_OFFSET		0x000c
@@ -686,8 +684,8 @@
 #define OMAP4430_PRM_LDO_ABB_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8)
 #define OMAP4_PRM_LDO_ABB_IVA_CTRL_OFFSET		0x00dc
 #define OMAP4430_PRM_LDO_ABB_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc)
-#define OMAP4_PRM_LDO_BANDGAP_CTRL_OFFSET		0x00e0
-#define OMAP4430_PRM_LDO_BANDGAP_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0)
+#define OMAP4_PRM_LDO_BANDGAP_SETUP_OFFSET		0x00e0
+#define OMAP4430_PRM_LDO_BANDGAP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0)
 #define OMAP4_PRM_DEVICE_OFF_CTRL_OFFSET		0x00e4
 #define OMAP4430_PRM_DEVICE_OFF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4)
 #define OMAP4_PRM_PHASE1_CNDP_OFFSET			0x00e8
@@ -698,6 +696,8 @@
 #define OMAP4430_PRM_PHASE2B_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0)
 #define OMAP4_PRM_MODEM_IF_CTRL_OFFSET			0x00f4
 #define OMAP4430_PRM_MODEM_IF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4)
+#define OMAP4_PRM_VC_ERRST_OFFSET			0x00f8
+#define OMAP4430_PRM_VC_ERRST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f8)
 
 /*
  * PRCM_MPU
@@ -715,6 +715,8 @@
 /* PRCM_MPU.DEVICE_PRM register offsets */
 #define OMAP4_PRCM_MPU_PRM_RSTST_OFFSET			0x0000
 #define OMAP4430_PRCM_MPU_PRM_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_MOD, 0x0000)
+#define OMAP4_PRCM_MPU_PRM_PSCON_COUNT_OFFSET		0x0004
+#define OMAP4430_PRCM_MPU_PRM_PSCON_COUNT		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_MOD, 0x0004)
 
 /* PRCM_MPU.CPU0 register offsets */
 #define OMAP4_PM_CPU0_PWRSTCTRL_OFFSET			0x0000
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3771254dfa81..becf0e38ef7e 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -19,24 +19,38 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/serial_8250.h>
+#include <linux/pm_runtime.h>
+
+#ifdef CONFIG_SERIAL_OMAP
+#include <plat/omap-serial.h>
+#endif
 
 #include <plat/common.h>
 #include <plat/board.h>
 #include <plat/clock.h>
-#include <plat/control.h>
+#include <plat/dma.h>
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
 
 #include "prm.h"
 #include "pm.h"
+#include "cm.h"
 #include "prm-regbits-34xx.h"
+#include "control.h"
 
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
+#define UART_ERRATA_FIFO_FULL_ABORT	(0x1 << 0)
+#define UART_ERRATA_i202_MDR1_ACCESS	(0x1 << 1)
+
 /*
  * NOTE: By default the serial timeout is disabled as it causes lost characters
  * over the serial ports. This means that the UART clocks will stay on until
@@ -45,6 +59,8 @@
  */
 #define DEFAULT_TIMEOUT 0
 
+#define MAX_UART_HWMOD_NAME_LEN		16
+
 struct omap_uart_state {
 	int num;
 	int can_sleep;
@@ -55,15 +71,23 @@ struct omap_uart_state {
 	void __iomem *wk_en;
 	u32 wk_mask;
 	u32 padconf;
+	u32 dma_enabled;
 
 	struct clk *ick;
 	struct clk *fck;
 	int clocked;
 
-	struct plat_serial8250_port *p;
+	int irq;
+	int regshift;
+	int irqflags;
+	void __iomem *membase;
+	resource_size_t mapbase;
+
 	struct list_head node;
-	struct platform_device pdev;
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
 
+	u32 errata;
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 	int context_valid;
 
@@ -74,79 +98,52 @@ struct omap_uart_state {
 	u16 sysc;
 	u16 scr;
 	u16 wer;
+	u16 mcr;
 #endif
 };
 
 static LIST_HEAD(uart_list);
+static u8 num_uarts;
 
-static struct plat_serial8250_port serial_platform_data0[] = {
-	{
-		.irq		= 72,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-		.flags		= 0
-	}
-};
+/*
+ * Since these idle/enable hooks are used in the idle path itself
+ * which has interrupts disabled, use the non-locking versions of
+ * the hwmod enable/disable functions.
+ */
+static int uart_idle_hwmod(struct omap_device *od)
+{
+	_omap_hwmod_idle(od->hwmods[0]);
 
-static struct plat_serial8250_port serial_platform_data1[] = {
-	{
-		.irq		= 73,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-		.flags		= 0
-	}
-};
+	return 0;
+}
 
-static struct plat_serial8250_port serial_platform_data2[] = {
-	{
-		.irq		= 74,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-		.flags		= 0
-	}
-};
+static int uart_enable_hwmod(struct omap_device *od)
+{
+	_omap_hwmod_enable(od->hwmods[0]);
 
-static struct plat_serial8250_port serial_platform_data3[] = {
+	return 0;
+}
+
+static struct omap_device_pm_latency omap_uart_latency[] = {
 	{
-		.irq		= 70,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-		.flags		= 0
-	}
+		.deactivate_func = uart_idle_hwmod,
+		.activate_func	 = uart_enable_hwmod,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
 };
 
-void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
-{
-	serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
-	serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
-	serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
-	serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
-}
-
 static inline unsigned int __serial_read_reg(struct uart_port *up,
-					   int offset)
+					     int offset)
 {
 	offset <<= up->regshift;
 	return (unsigned int)__raw_readb(up->membase + offset);
 }
 
-static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+static inline unsigned int serial_read_reg(struct omap_uart_state *uart,
 					   int offset)
 {
-	offset <<= up->regshift;
-	return (unsigned int)__raw_readb(up->membase + offset);
+	offset <<= uart->regshift;
+	return (unsigned int)__raw_readb(uart->membase + offset);
 }
 
 static inline void __serial_write_reg(struct uart_port *up, int offset,
@@ -156,11 +153,11 @@ static inline void __serial_write_reg(struct uart_port *up, int offset,
 	__raw_writeb(value, up->membase + offset);
 }
 
-static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+static inline void serial_write_reg(struct omap_uart_state *uart, int offset,
 				    int value)
 {
-	offset <<= p->regshift;
-	__raw_writeb(value, p->membase + offset);
+	offset <<= uart->regshift;
+	__raw_writeb(value, uart->membase + offset);
 }
 
 /*
@@ -168,35 +165,70 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
  * properly. Note that the TX watermark initialization may not be needed
  * once the 8250.c watermark handling code is merged.
  */
+
 static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 {
-	struct plat_serial8250_port *p = uart->p;
-
-	serial_write_reg(p, UART_OMAP_MDR1, 0x07);
-	serial_write_reg(p, UART_OMAP_SCR, 0x08);
-	serial_write_reg(p, UART_OMAP_MDR1, 0x00);
-	serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
+	serial_write_reg(uart, UART_OMAP_MDR1, 0x07);
+	serial_write_reg(uart, UART_OMAP_SCR, 0x08);
+	serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
 }
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
 
+/*
+ * Work Around for Errata i202 (3430 - 1.12, 3630 - 1.6)
+ * The access to uart register after MDR1 Access
+ * causes UART to corrupt data.
+ *
+ * Need a delay =
+ * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS)
+ * give 10 times as much
+ */
+static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val,
+		u8 fcr_val)
+{
+	u8 timeout = 255;
+
+	serial_write_reg(uart, UART_OMAP_MDR1, mdr1_val);
+	udelay(2);
+	serial_write_reg(uart, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT |
+			UART_FCR_CLEAR_RCVR);
+	/*
+	 * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
+	 * TX_FIFO_E bit is 1.
+	 */
+	while (UART_LSR_THRE != (serial_read_reg(uart, UART_LSR) &
+				(UART_LSR_THRE | UART_LSR_DR))) {
+		timeout--;
+		if (!timeout) {
+			/* Should *never* happen. we warn and carry on */
+			dev_crit(&uart->pdev->dev, "Errata i202: timedout %x\n",
+			serial_read_reg(uart, UART_LSR));
+			break;
+		}
+		udelay(1);
+	}
+}
+
 static void omap_uart_save_context(struct omap_uart_state *uart)
 {
 	u16 lcr = 0;
-	struct plat_serial8250_port *p = uart->p;
 
 	if (!enable_off_mode)
 		return;
 
-	lcr = serial_read_reg(p, UART_LCR);
-	serial_write_reg(p, UART_LCR, 0xBF);
-	uart->dll = serial_read_reg(p, UART_DLL);
-	uart->dlh = serial_read_reg(p, UART_DLM);
-	serial_write_reg(p, UART_LCR, lcr);
-	uart->ier = serial_read_reg(p, UART_IER);
-	uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
-	uart->scr = serial_read_reg(p, UART_OMAP_SCR);
-	uart->wer = serial_read_reg(p, UART_OMAP_WER);
+	lcr = serial_read_reg(uart, UART_LCR);
+	serial_write_reg(uart, UART_LCR, 0xBF);
+	uart->dll = serial_read_reg(uart, UART_DLL);
+	uart->dlh = serial_read_reg(uart, UART_DLM);
+	serial_write_reg(uart, UART_LCR, lcr);
+	uart->ier = serial_read_reg(uart, UART_IER);
+	uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC);
+	uart->scr = serial_read_reg(uart, UART_OMAP_SCR);
+	uart->wer = serial_read_reg(uart, UART_OMAP_WER);
+	serial_write_reg(uart, UART_LCR, 0x80);
+	uart->mcr = serial_read_reg(uart, UART_MCR);
+	serial_write_reg(uart, UART_LCR, lcr);
 
 	uart->context_valid = 1;
 }
@@ -204,7 +236,6 @@ static void omap_uart_save_context(struct omap_uart_state *uart)
 static void omap_uart_restore_context(struct omap_uart_state *uart)
 {
 	u16 efr = 0;
-	struct plat_serial8250_port *p = uart->p;
 
 	if (!enable_off_mode)
 		return;
@@ -214,25 +245,33 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
 
 	uart->context_valid = 0;
 
-	serial_write_reg(p, UART_OMAP_MDR1, 0x7);
-	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
-	efr = serial_read_reg(p, UART_EFR);
-	serial_write_reg(p, UART_EFR, UART_EFR_ECB);
-	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
-	serial_write_reg(p, UART_IER, 0x0);
-	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
-	serial_write_reg(p, UART_DLL, uart->dll);
-	serial_write_reg(p, UART_DLM, uart->dlh);
-	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
-	serial_write_reg(p, UART_IER, uart->ier);
-	serial_write_reg(p, UART_FCR, 0xA1);
-	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
-	serial_write_reg(p, UART_EFR, efr);
-	serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
-	serial_write_reg(p, UART_OMAP_SCR, uart->scr);
-	serial_write_reg(p, UART_OMAP_WER, uart->wer);
-	serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
-	serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+	if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
+		omap_uart_mdr1_errataset(uart, 0x07, 0xA0);
+	else
+		serial_write_reg(uart, UART_OMAP_MDR1, 0x7);
+	serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+	efr = serial_read_reg(uart, UART_EFR);
+	serial_write_reg(uart, UART_EFR, UART_EFR_ECB);
+	serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(uart, UART_IER, 0x0);
+	serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(uart, UART_DLL, uart->dll);
+	serial_write_reg(uart, UART_DLM, uart->dlh);
+	serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(uart, UART_IER, uart->ier);
+	serial_write_reg(uart, UART_LCR, 0x80);
+	serial_write_reg(uart, UART_MCR, uart->mcr);
+	serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(uart, UART_EFR, efr);
+	serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8);
+	serial_write_reg(uart, UART_OMAP_SCR, uart->scr);
+	serial_write_reg(uart, UART_OMAP_WER, uart->wer);
+	serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc);
+	if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
+		omap_uart_mdr1_errataset(uart, 0x00, 0xA1);
+	else
+		/* UART 16x mode */
+		serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
 }
 #else
 static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
@@ -244,8 +283,7 @@ static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
 	if (uart->clocked)
 		return;
 
-	clk_enable(uart->ick);
-	clk_enable(uart->fck);
+	omap_device_enable(uart->pdev);
 	uart->clocked = 1;
 	omap_uart_restore_context(uart);
 }
@@ -259,8 +297,7 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
 
 	omap_uart_save_context(uart);
 	uart->clocked = 0;
-	clk_disable(uart->ick);
-	clk_disable(uart->fck);
+	omap_device_idle(uart->pdev);
 }
 
 static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
@@ -298,18 +335,24 @@ static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
 }
 
 static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
-					  int enable)
+					       int enable)
 {
-	struct plat_serial8250_port *p = uart->p;
-	u16 sysc;
+	u8 idlemode;
 
-	sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
-	if (enable)
-		sysc |= 0x2 << 3;
-	else
-		sysc |= 0x1 << 3;
+	if (enable) {
+		/**
+		 * Errata 2.15: [UART]:Cannot Acknowledge Idle Requests
+		 * in Smartidle Mode When Configured for DMA Operations.
+		 */
+		if (uart->dma_enabled)
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		else
+			idlemode = HWMOD_IDLEMODE_SMART;
+	} else {
+		idlemode = HWMOD_IDLEMODE_NO;
+	}
 
-	serial_write_reg(p, UART_OMAP_SYSC, sysc);
+	omap_hwmod_set_slave_idlemode(uart->oh, idlemode);
 }
 
 static void omap_uart_block_sleep(struct omap_uart_state *uart)
@@ -326,7 +369,7 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart)
 
 static void omap_uart_allow_sleep(struct omap_uart_state *uart)
 {
-	if (device_may_wakeup(&uart->pdev.dev))
+	if (device_may_wakeup(&uart->pdev->dev))
 		omap_uart_enable_wakeup(uart);
 	else
 		omap_uart_disable_wakeup(uart);
@@ -421,6 +464,7 @@ int omap_uart_can_sleep(void)
  * UART will not idle or sleep for its timeout period.
  *
  **/
+/* static int first_interrupt; */
 static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
 {
 	struct omap_uart_state *uart = dev_id;
@@ -432,7 +476,6 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
 
 static void omap_uart_idle_init(struct omap_uart_state *uart)
 {
-	struct plat_serial8250_port *p = uart->p;
 	int ret;
 
 	uart->can_sleep = 0;
@@ -444,7 +487,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 	omap_uart_smart_idle_enable(uart, 0);
 
 	if (cpu_is_omap34xx()) {
-		u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+		u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD;
 		u32 wk_mask = 0;
 		u32 padconf = 0;
 
@@ -463,19 +506,17 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 			wk_mask = OMAP3430_ST_UART3_MASK;
 			padconf = 0x19e;
 			break;
+		case 3:
+			wk_mask = OMAP3630_ST_UART4_MASK;
+			padconf = 0x0d2;
+			break;
 		}
 		uart->wk_mask = wk_mask;
 		uart->padconf = padconf;
 	} else if (cpu_is_omap24xx()) {
 		u32 wk_mask = 0;
+		u32 wk_en = PM_WKEN1, wk_st = PM_WKST1;
 
-		if (cpu_is_omap2430()) {
-			uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
-			uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
-		} else if (cpu_is_omap2420()) {
-			uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
-			uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
-		}
 		switch (uart->num) {
 		case 0:
 			wk_mask = OMAP24XX_ST_UART1_MASK;
@@ -484,20 +525,29 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 			wk_mask = OMAP24XX_ST_UART2_MASK;
 			break;
 		case 2:
+			wk_en = OMAP24XX_PM_WKEN2;
+			wk_st = OMAP24XX_PM_WKST2;
 			wk_mask = OMAP24XX_ST_UART3_MASK;
 			break;
 		}
 		uart->wk_mask = wk_mask;
+		if (cpu_is_omap2430()) {
+			uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, wk_en);
+			uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, wk_st);
+		} else if (cpu_is_omap2420()) {
+			uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, wk_en);
+			uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, wk_st);
+		}
 	} else {
-		uart->wk_en = 0;
-		uart->wk_st = 0;
+		uart->wk_en = NULL;
+		uart->wk_st = NULL;
 		uart->wk_mask = 0;
 		uart->padconf = 0;
 	}
 
-	p->irqflags |= IRQF_SHARED;
-	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
-			  "serial idle", (void *)uart);
+	uart->irqflags |= IRQF_SHARED;
+	ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt,
+				   IRQF_SHARED, "serial idle", (void *)uart);
 	WARN_ON(ret);
 }
 
@@ -507,11 +557,17 @@ void omap_uart_enable_irqs(int enable)
 	struct omap_uart_state *uart;
 
 	list_for_each_entry(uart, &uart_list, node) {
-		if (enable)
-			ret = request_irq(uart->p->irq, omap_uart_interrupt,
-				IRQF_SHARED, "serial idle", (void *)uart);
-		else
-			free_irq(uart->p->irq, (void *)uart);
+		if (enable) {
+			pm_runtime_put_sync(&uart->pdev->dev);
+			ret = request_threaded_irq(uart->irq, NULL,
+						   omap_uart_interrupt,
+						   IRQF_SHARED,
+						   "serial idle",
+						   (void *)uart);
+		} else {
+			pm_runtime_get_noresume(&uart->pdev->dev);
+			free_irq(uart->irq, (void *)uart);
+		}
 	}
 }
 
@@ -519,10 +575,9 @@ static ssize_t sleep_timeout_show(struct device *dev,
 				  struct device_attribute *attr,
 				  char *buf)
 {
-	struct platform_device *pdev = container_of(dev,
-					struct platform_device, dev);
-	struct omap_uart_state *uart = container_of(pdev,
-					struct omap_uart_state, pdev);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *odev = to_omap_device(pdev);
+	struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
 
 	return sprintf(buf, "%u\n", uart->timeout / HZ);
 }
@@ -531,10 +586,9 @@ static ssize_t sleep_timeout_store(struct device *dev,
 				   struct device_attribute *attr,
 				   const char *buf, size_t n)
 {
-	struct platform_device *pdev = container_of(dev,
-					struct platform_device, dev);
-	struct omap_uart_state *uart = container_of(pdev,
-					struct omap_uart_state, pdev);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *odev = to_omap_device(pdev);
+	struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
 	unsigned int value;
 
 	if (sscanf(buf, "%u", &value) != 1) {
@@ -552,52 +606,20 @@ static ssize_t sleep_timeout_store(struct device *dev,
 	return n;
 }
 
-DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show,
+		sleep_timeout_store);
 #define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
 #else
 static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+static void omap_uart_block_sleep(struct omap_uart_state *uart)
+{
+	/* Needed to enable UART clocks when built without CONFIG_PM */
+	omap_uart_enable_clocks(uart);
+}
 #define DEV_CREATE_FILE(dev, attr)
 #endif /* CONFIG_PM */
 
-static struct omap_uart_state omap_uart[] = {
-	{
-		.pdev = {
-			.name			= "serial8250",
-			.id			= PLAT8250_DEV_PLATFORM,
-			.dev			= {
-				.platform_data	= serial_platform_data0,
-			},
-		},
-	}, {
-		.pdev = {
-			.name			= "serial8250",
-			.id			= PLAT8250_DEV_PLATFORM1,
-			.dev			= {
-				.platform_data	= serial_platform_data1,
-			},
-		},
-	}, {
-		.pdev = {
-			.name			= "serial8250",
-			.id			= PLAT8250_DEV_PLATFORM2,
-			.dev			= {
-				.platform_data	= serial_platform_data2,
-			},
-		},
-	},
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	{
-		.pdev = {
-			.name			= "serial8250",
-			.id			= 3,
-			.dev			= {
-				.platform_data	= serial_platform_data3,
-			},
-		},
-	},
-#endif
-};
-
+#ifndef CONFIG_SERIAL_OMAP
 /*
  * Override the default 8250 read handler: mem_serial_in()
  * Empty RX fifo read causes an abort on omap3630 and omap4
@@ -630,71 +652,44 @@ static void serial_out_override(struct uart_port *up, int offset, int value)
 	}
 	__serial_write_reg(up, offset, value);
 }
+#endif
+
 void __init omap_serial_early_init(void)
 {
-	int i, nr_ports;
-	char name[16];
+	int i = 0;
 
-	if (!(cpu_is_omap3630() || cpu_is_omap4430()))
-		nr_ports = 3;
-	else
-		nr_ports = ARRAY_SIZE(omap_uart);
+	do {
+		char oh_name[MAX_UART_HWMOD_NAME_LEN];
+		struct omap_hwmod *oh;
+		struct omap_uart_state *uart;
 
-	/*
-	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
-	 */
+		snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
+			 "uart%d", i + 1);
+		oh = omap_hwmod_lookup(oh_name);
+		if (!oh)
+			break;
 
-	for (i = 0; i < nr_ports; i++) {
-		struct omap_uart_state *uart = &omap_uart[i];
-		struct platform_device *pdev = &uart->pdev;
-		struct device *dev = &pdev->dev;
-		struct plat_serial8250_port *p = dev->platform_data;
+		uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
+		if (WARN_ON(!uart))
+			return;
+
+		uart->oh = oh;
+		uart->num = i++;
+		list_add_tail(&uart->node, &uart_list);
+		num_uarts++;
 
-		/* Don't map zero-based physical address */
-		if (p->mapbase == 0) {
-			dev_warn(dev, "no physical address for uart#%d,"
-				 " so skipping early_init...\n", i);
-			continue;
-		}
 		/*
-		 * Module 4KB + L4 interconnect 4KB
-		 * Static mapping, never released
+		 * NOTE: omap_hwmod_init() has not yet been called,
+		 *       so no hwmod functions will work yet.
 		 */
-		p->membase = ioremap(p->mapbase, SZ_8K);
-		if (!p->membase) {
-			dev_err(dev, "ioremap failed for uart%i\n", i + 1);
-			continue;
-		}
-
-		sprintf(name, "uart%d_ick", i + 1);
-		uart->ick = clk_get(NULL, name);
-		if (IS_ERR(uart->ick)) {
-			dev_err(dev, "Could not get uart%d_ick\n", i + 1);
-			uart->ick = NULL;
-		}
-
-		sprintf(name, "uart%d_fck", i+1);
-		uart->fck = clk_get(NULL, name);
-		if (IS_ERR(uart->fck)) {
-			dev_err(dev, "Could not get uart%d_fck\n", i + 1);
-			uart->fck = NULL;
-		}
-
-		/* FIXME: Remove this once the clkdev is ready */
-		if (!cpu_is_omap44xx()) {
-			if (!uart->ick || !uart->fck)
-				continue;
-		}
 
-		uart->num = i;
-		p->private_data = uart;
-		uart->p = p;
-
-		if (cpu_is_omap44xx())
-			p->irq += 32;
-	}
+		/*
+		 * During UART early init, device need to be probed
+		 * to determine SoC specific init before omap_device
+		 * is ready.  Therefore, don't allow idle here
+		 */
+		uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
+	} while (1);
 }
 
 /**
@@ -711,52 +706,140 @@ void __init omap_serial_early_init(void)
 void __init omap_serial_init_port(int port)
 {
 	struct omap_uart_state *uart;
-	struct platform_device *pdev;
-	struct device *dev;
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+	void *pdata = NULL;
+	u32 pdata_size = 0;
+	char *name;
+#ifndef CONFIG_SERIAL_OMAP
+	struct plat_serial8250_port ports[2] = {
+		{},
+		{.flags = 0},
+	};
+	struct plat_serial8250_port *p = &ports[0];
+#else
+	struct omap_uart_port_info omap_up;
+#endif
 
-	BUG_ON(port < 0);
-	BUG_ON(port >= ARRAY_SIZE(omap_uart));
+	if (WARN_ON(port < 0))
+		return;
+	if (WARN_ON(port >= num_uarts))
+		return;
 
-	uart = &omap_uart[port];
-	pdev = &uart->pdev;
-	dev = &pdev->dev;
+	list_for_each_entry(uart, &uart_list, node)
+		if (port == uart->num)
+			break;
 
-	/* Don't proceed if there's no clocks available */
-	if (unlikely(!uart->ick || !uart->fck)) {
-		WARN(1, "%s: can't init uart%d, no clocks available\n",
-		     kobject_name(&dev->kobj), port);
-		return;
+	oh = uart->oh;
+	uart->dma_enabled = 0;
+#ifndef CONFIG_SERIAL_OMAP
+	name = "serial8250";
+
+	/*
+	 * !! 8250 driver does not use standard IORESOURCE* It
+	 * has it's own custom pdata that can be taken from
+	 * the hwmod resource data.  But, this needs to be
+	 * done after the build.
+	 *
+	 * ?? does it have to be done before the register ??
+	 * YES, because platform_device_data_add() copies
+	 * pdata, it does not use a pointer.
+	 */
+	p->flags = UPF_BOOT_AUTOCONF;
+	p->iotype = UPIO_MEM;
+	p->regshift = 2;
+	p->uartclk = OMAP24XX_BASE_BAUD * 16;
+	p->irq = oh->mpu_irqs[0].irq;
+	p->mapbase = oh->slaves[0]->addr->pa_start;
+	p->membase = omap_hwmod_get_mpu_rt_va(oh);
+	p->irqflags = IRQF_SHARED;
+	p->private_data = uart;
+
+	/*
+	 * omap44xx: Never read empty UART fifo
+	 * omap3xxx: Never read empty UART fifo on UARTs
+	 * with IP rev >=0x52
+	 */
+	uart->regshift = p->regshift;
+	uart->membase = p->membase;
+	if (cpu_is_omap44xx())
+		uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
+	else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF)
+			>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
+		uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
+
+	if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) {
+		p->serial_in = serial_in_override;
+		p->serial_out = serial_out_override;
 	}
 
-	omap_uart_enable_clocks(uart);
+	pdata = &ports[0];
+	pdata_size = 2 * sizeof(struct plat_serial8250_port);
+#else
 
-	omap_uart_reset(uart);
-	omap_uart_idle_init(uart);
+	name = DRIVER_NAME;
 
-	list_add_tail(&uart->node, &uart_list);
+	omap_up.dma_enabled = uart->dma_enabled;
+	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
+	omap_up.mapbase = oh->slaves[0]->addr->pa_start;
+	omap_up.membase = omap_hwmod_get_mpu_rt_va(oh);
+	omap_up.irqflags = IRQF_SHARED;
+	omap_up.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
 
-	if (WARN_ON(platform_device_register(pdev)))
+	pdata = &omap_up;
+	pdata_size = sizeof(struct omap_uart_port_info);
+#endif
+
+	if (WARN_ON(!oh))
 		return;
 
-	if ((cpu_is_omap34xx() && uart->padconf) ||
-	    (uart->wk_en && uart->wk_mask)) {
-		device_init_wakeup(dev, true);
-		DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
-	}
+	od = omap_device_build(name, uart->num, oh, pdata, pdata_size,
+			       omap_uart_latency,
+			       ARRAY_SIZE(omap_uart_latency), false);
+	WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
+	     name, oh->name);
+
+	uart->irq = oh->mpu_irqs[0].irq;
+	uart->regshift = 2;
+	uart->mapbase = oh->slaves[0]->addr->pa_start;
+	uart->membase = omap_hwmod_get_mpu_rt_va(oh);
+	uart->pdev = &od->pdev;
+
+	oh->dev_attr = uart;
 
 	/*
-	 * omap44xx: Never read empty UART fifo
-	 * omap3xxx: Never read empty UART fifo on UARTs
-	 * with IP rev >=0x52
+	 * Because of early UART probing, UART did not get idled
+	 * on init.  Now that omap_device is ready, ensure full idle
+	 * before doing omap_device_enable().
 	 */
-	if (cpu_is_omap44xx()) {
-		uart->p->serial_in = serial_in_override;
-		uart->p->serial_out = serial_out_override;
-	} else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
-			>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) {
-		uart->p->serial_in = serial_in_override;
-		uart->p->serial_out = serial_out_override;
+	omap_hwmod_idle(uart->oh);
+
+	omap_device_enable(uart->pdev);
+	omap_uart_idle_init(uart);
+	omap_uart_reset(uart);
+	omap_hwmod_enable_wakeup(uart->oh);
+	omap_device_idle(uart->pdev);
+
+	/*
+	 * Need to block sleep long enough for interrupt driven
+	 * driver to start.  Console driver is in polling mode
+	 * so device needs to be kept enabled while polling driver
+	 * is in use.
+	 */
+	if (uart->timeout)
+		uart->timeout = (30 * HZ);
+	omap_uart_block_sleep(uart);
+	uart->timeout = DEFAULT_TIMEOUT;
+
+	if ((cpu_is_omap34xx() && uart->padconf) ||
+	    (uart->wk_en && uart->wk_mask)) {
+		device_init_wakeup(&od->pdev.dev, true);
+		DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout);
 	}
+
+	/* Enable the MDR1 errata for OMAP3 */
+	if (cpu_is_omap34xx())
+		uart->errata |= UART_ERRATA_i202_MDR1_ACCESS;
 }
 
 /**
@@ -768,13 +851,8 @@ void __init omap_serial_init_port(int port)
  */
 void __init omap_serial_init(void)
 {
-	int i, nr_ports;
-
-	if (!(cpu_is_omap3630() || cpu_is_omap4430()))
-		nr_ports = 3;
-	else
-		nr_ports = ARRAY_SIZE(omap_uart);
+	struct omap_uart_state *uart;
 
-	for (i = 0; i < nr_ports; i++)
-		omap_serial_init_port(i);
+	list_for_each_entry(uart, &uart_list, node)
+		omap_serial_init_port(uart->num);
 }
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index d522cd70bf53..2fb205a7f285 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -27,11 +27,11 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <plat/control.h>
 
 #include "cm.h"
 #include "prm.h"
 #include "sdrc.h"
+#include "control.h"
 
 #define SDRC_SCRATCHPAD_SEM_V	0xfa00291c
 
@@ -60,7 +60,7 @@
 #define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
         .text
-/* Function to aquire the semaphore in scratchpad */
+/* Function to acquire the semaphore in scratchpad */
 ENTRY(lock_scratchpad_sem)
 	stmfd	sp!, {lr}	@ save registers on stack
 wait_sem:
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index de99ba2a57ab..3637274af5be 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -129,8 +129,11 @@ ENTRY(omap3_sram_configure_core_dpll)
 	ldr	r4, [sp, #80]
 	str     r4, omap_sdrc_mr_1_val
 skip_cs1_params:
+	mrc	p15, 0, r8, c1, c0, 0	@ read ctrl register
+	bic	r10, r8, #0x800		@ clear Z-bit, disable branch prediction
+	mcr	p15, 0, r10, c1, c0, 0	@ write ctrl register
 	dsb				@ flush buffered writes to interconnect
-
+	isb				@ prevent speculative exec past here
 	cmp	r3, #1			@ if increasing SDRC clk rate,
 	bleq	configure_sdrc		@ program the SDRC regs early (for RFR)
 	cmp	r1, #SDRC_UNLOCK_DLL	@ set the intended DLL state
@@ -148,6 +151,7 @@ skip_cs1_params:
 	beq	return_to_sdram		@ return to SDRAM code, otherwise,
 	bl	configure_sdrc		@ reprogram SDRC regs now
 return_to_sdram:
+	mcr	p15, 0, r8, c1, c0, 0	@ restore ctrl register
 	isb				@ prevent speculative exec past here
 	mov 	r0, #0 			@ return value
 	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 74fbed8491f2..e13c29eecf2b 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -40,6 +40,8 @@
 #include <plat/dmtimer.h>
 #include <asm/localtimer.h>
 
+#include "timer-gp.h"
+
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
 
@@ -228,8 +230,10 @@ static void __init omap2_gp_clocksource_init(void)
 static void __init omap2_gp_timer_init(void)
 {
 #ifdef CONFIG_LOCAL_TIMERS
-	twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
-	BUG_ON(!twd_base);
+	if (cpu_is_omap44xx()) {
+		twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
+		BUG_ON(!twd_base);
+	}
 #endif
 	omap_dm_timer_init();
 
diff --git a/arch/arm/plat-omap/include/plat/timer-gp.h b/arch/arm/mach-omap2/timer-gp.h
index c88d346b59d9..5c1072c6783b 100644
--- a/arch/arm/plat-omap/include/plat/timer-gp.h
+++ b/arch/arm/mach-omap2/timer-gp.h
@@ -11,7 +11,6 @@
 #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
 #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
 
-int __init omap2_gp_clockevent_set_gptimer(u8 id);
+extern int __init omap2_gp_clockevent_set_gptimer(u8 id);
 
 #endif
-
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index d72d1ac30333..b11bf385d360 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -23,7 +23,6 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/io.h>
-#include <plat/mux.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c
new file mode 100644
index 000000000000..1481078763b8
--- /dev/null
+++ b/arch/arm/mach-omap2/usb-fs.c
@@ -0,0 +1,359 @@
+/*
+ * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <asm/irq.h>
+
+#include <plat/usb.h>
+#include <plat/board.h>
+
+#include "control.h"
+#include "mux.h"
+
+#define INT_USB_IRQ_GEN		INT_24XX_USB_IRQ_GEN
+#define INT_USB_IRQ_NISO	INT_24XX_USB_IRQ_NISO
+#define INT_USB_IRQ_ISO		INT_24XX_USB_IRQ_ISO
+#define INT_USB_IRQ_HGEN	INT_24XX_USB_IRQ_HGEN
+#define INT_USB_IRQ_OTG		INT_24XX_USB_IRQ_OTG
+
+#if defined(CONFIG_ARCH_OMAP2)
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+
+static struct resource udc_resources[] = {
+	/* order is significant! */
+	{		/* registers */
+		.start		= UDC_BASE,
+		.end		= UDC_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {		/* general IRQ */
+		.start		= INT_USB_IRQ_GEN,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* PIO IRQ */
+		.start		= INT_USB_IRQ_NISO,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* SOF IRQ */
+		.start		= INT_USB_IRQ_ISO,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device udc_device = {
+	.name		= "omap_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &udc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(udc_resources),
+	.resource	= udc_resources,
+};
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+	pdata->udc_device = &udc_device;
+}
+
+#else
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static struct resource ohci_resources[] = {
+	{
+		.start	= OMAP_OHCI_BASE,
+		.end	= OMAP_OHCI_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_IRQ_HGEN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci_device = {
+	.name			= "ohci",
+	.id			= -1,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(ohci_resources),
+	.resource		= ohci_resources,
+};
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+	pdata->ohci_device = &ohci_device;
+}
+
+#else
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
+
+static struct resource otg_resources[] = {
+	/* order is significant! */
+	{
+		.start		= OTG_BASE,
+		.end		= OTG_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= INT_USB_IRQ_OTG,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device otg_device = {
+	.name		= "omap_otg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+	.resource	= otg_resources,
+};
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+	pdata->otg_device = &otg_device;
+}
+
+#else
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+static void omap2_usb_devconf_clear(u8 port, u32 mask)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r &= ~USBTXWRMODEI(port, mask);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb_devconf_set(u8 port, u32 mask)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r |= USBTXWRMODEI(port, mask);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb2_disable_5pinbitll(void)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb2_enable_5pinunitll(void)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)
+{
+	u32	syscon1 = 0;
+
+	omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
+
+	if (nwires == 0)
+		return 0;
+
+	if (is_device)
+		omap_mux_init_signal("usb0_puen", 0);
+
+	omap_mux_init_signal("usb0_dat", 0);
+	omap_mux_init_signal("usb0_txen", 0);
+	omap_mux_init_signal("usb0_se0", 0);
+	if (nwires != 3)
+		omap_mux_init_signal("usb0_rcv", 0);
+
+	switch (nwires) {
+	case 3:
+		syscon1 = 2;
+		omap2_usb_devconf_set(0, USB_BIDIR);
+		break;
+	case 4:
+		syscon1 = 1;
+		omap2_usb_devconf_set(0, USB_BIDIR);
+		break;
+	case 6:
+		syscon1 = 3;
+		omap_mux_init_signal("usb0_vp", 0);
+		omap_mux_init_signal("usb0_vm", 0);
+		omap2_usb_devconf_set(0, USB_UNIDIR);
+		break;
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			0, nwires);
+	}
+
+	return syscon1 << 16;
+}
+
+static u32 __init omap2_usb1_init(unsigned nwires)
+{
+	u32	syscon1 = 0;
+
+	omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
+
+	if (nwires == 0)
+		return 0;
+
+	/* NOTE:  board-specific code must set up pin muxing for usb1,
+	 * since each signal could come out on either of two balls.
+	 */
+
+	switch (nwires) {
+	case 2:
+		/* NOTE: board-specific code must override this setting if
+		 * this TLL link is not using DP/DM
+		 */
+		syscon1 = 1;
+		omap2_usb_devconf_set(1, USB_BIDIR_TLL);
+		break;
+	case 3:
+		syscon1 = 2;
+		omap2_usb_devconf_set(1, USB_BIDIR);
+		break;
+	case 4:
+		syscon1 = 1;
+		omap2_usb_devconf_set(1, USB_BIDIR);
+		break;
+	case 6:
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			1, nwires);
+	}
+
+	return syscon1 << 20;
+}
+
+static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+	u32	syscon1 = 0;
+
+	omap2_usb2_disable_5pinbitll();
+	alt_pingroup = 0;
+
+	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
+	if (alt_pingroup || nwires == 0)
+		return 0;
+
+	omap_mux_init_signal("usb2_dat", 0);
+	omap_mux_init_signal("usb2_se0", 0);
+	if (nwires > 2)
+		omap_mux_init_signal("usb2_txen", 0);
+	if (nwires > 3)
+		omap_mux_init_signal("usb2_rcv", 0);
+
+	switch (nwires) {
+	case 2:
+		/* NOTE: board-specific code must override this setting if
+		 * this TLL link is not using DP/DM
+		 */
+		syscon1 = 1;
+		omap2_usb_devconf_set(2, USB_BIDIR_TLL);
+		break;
+	case 3:
+		syscon1 = 2;
+		omap2_usb_devconf_set(2, USB_BIDIR);
+		break;
+	case 4:
+		syscon1 = 1;
+		omap2_usb_devconf_set(2, USB_BIDIR);
+		break;
+	case 5:
+		/* NOTE: board-specific code must mux this setting depending
+		 * on TLL link using DP/DM.  Something must also
+		 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
+		 * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0
+		 * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0
+		 */
+
+		syscon1 = 3;
+		omap2_usb2_enable_5pinunitll();
+		break;
+	case 6:
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			2, nwires);
+	}
+
+	return syscon1 << 24;
+}
+
+void __init omap2_usbfs_init(struct omap_usb_config *pdata)
+{
+	struct clk *ick;
+
+	if (!cpu_is_omap24xx())
+		return;
+
+	ick = clk_get(NULL, "usb_l4_ick");
+	if (IS_ERR(ick))
+		return;
+
+	clk_enable(ick);
+	pdata->usb0_init = omap2_usb0_init;
+	pdata->usb1_init = omap2_usb1_init;
+	pdata->usb2_init = omap2_usb2_init;
+	udc_device_init(pdata);
+	ohci_device_init(pdata);
+	otg_device_init(pdata);
+	omap_otg_init(pdata);
+	clk_disable(ick);
+	clk_put(ick);
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 96f6787e00b2..72605584bfff 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,7 +28,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <plat/mux.h>
+#include <mach/am35xx.h>
 #include <plat/usb.h>
 
 #ifdef CONFIG_USB_MUSB_SOC
@@ -90,6 +90,9 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)
 {
 	if (cpu_is_omap243x()) {
 		musb_resources[0].start = OMAP243X_HS_BASE;
+	} else if (cpu_is_omap3517() || cpu_is_omap3505()) {
+		musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
+		musb_resources[1].start = INT_35XX_USBOTG_IRQ;
 	} else if (cpu_is_omap34xx()) {
 		musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
 	} else if (cpu_is_omap44xx()) {
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 10a2013c1104..64a0112b70a5 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -17,8 +17,8 @@
 #include <linux/usb/musb.h>
 
 #include <plat/gpmc.h>
-#include <plat/mux.h>
 
+#include "mux.h"
 
 static u8		async_cs, sync_cs;
 static unsigned		refclk_psec;
@@ -325,17 +325,17 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 	else {
 		/* assume OMAP 2420 ES2.0 and later */
 		if (dmachan & (1 << 0))
-			omap_cfg_reg(AA10_242X_DMAREQ0);
+			omap_mux_init_signal("sys_ndmareq0", 0);
 		if (dmachan & (1 << 1))
-			omap_cfg_reg(AA6_242X_DMAREQ1);
+			omap_mux_init_signal("sys_ndmareq1", 0);
 		if (dmachan & (1 << 2))
-			omap_cfg_reg(E4_242X_DMAREQ2);
+			omap_mux_init_signal("sys_ndmareq2", 0);
 		if (dmachan & (1 << 3))
-			omap_cfg_reg(G4_242X_DMAREQ3);
+			omap_mux_init_signal("sys_ndmareq3", 0);
 		if (dmachan & (1 << 4))
-			omap_cfg_reg(D3_242X_DMAREQ4);
+			omap_mux_init_signal("sys_ndmareq4", 0);
 		if (dmachan & (1 << 5))
-			omap_cfg_reg(E3_242X_DMAREQ5);
+			omap_mux_init_signal("sys_ndmareq5", 0);
 	}
 
 	/* so far so good ... register the device */
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 905719a677ae..c897e03e413d 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -26,6 +26,7 @@ config MACH_KUROBOX_PRO
 config MACH_DNS323
 	bool "D-Link DNS-323"
 	select I2C_BOARDINFO
+	select PHYLIB
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  D-Link DNS-323 platform.
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 7130904ad999..b1c451f5ee27 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -336,8 +336,6 @@ static void __init d2net_init(void)
 
 #ifdef CONFIG_MACH_D2NET
 MACHINE_START(D2NET, "LaCie d2 Network")
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= d2net_init,
 	.map_io		= orion5x_map_io,
@@ -349,8 +347,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_BIGDISK
 MACHINE_START(BIGDISK, "LaCie Big Disk Network")
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= d2net_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index d318bea2af91..df1083f5b6eb 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -358,8 +358,6 @@ static void __init db88f5281_init(void)
 
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
 	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= db88f5281_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index fe0de1698edc..3a7bc0e36982 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -3,6 +3,10 @@
  *
  * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
  *
+ * Support for HW Rev C1:
+ *
+ * Copyright (C) 2010 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU Lesser General Public License as
  * published by the Free Software Foundation; either version 2 of the
@@ -23,6 +27,8 @@
 #include <linux/input.h>
 #include <linux/i2c.h>
 #include <linux/ata_platform.h>
+#include <linux/phy.h>
+#include <linux/marvell_phy.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
@@ -31,6 +37,7 @@
 #include "common.h"
 #include "mpp.h"
 
+/* Rev A1 and B1 */
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
 #define DNS323_GPIO_SYSTEM_UP		3
@@ -42,6 +49,23 @@
 #define DNS323_GPIO_KEY_POWER		9
 #define DNS323_GPIO_KEY_RESET		10
 
+/* Rev C1 */
+#define DNS323C_GPIO_KEY_POWER		1
+#define DNS323C_GPIO_POWER_OFF		2
+#define DNS323C_GPIO_LED_RIGHT_AMBER	8
+#define DNS323C_GPIO_LED_LEFT_AMBER	9
+#define DNS323C_GPIO_LED_POWER		17
+#define DNS323C_GPIO_FAN_BIT1		18
+#define DNS323C_GPIO_FAN_BIT0		19
+
+/* Exposed to userspace, do not change */
+enum {
+	DNS323_REV_A1,	/* 0 */
+	DNS323_REV_B1,	/* 1 */
+	DNS323_REV_C1,	/* 2 */
+};
+
+
 /****************************************************************************
  * PCI setup
  */
@@ -68,21 +92,12 @@ static struct hw_pci dns323_pci __initdata = {
 	.map_irq	= dns323_pci_map_irq,
 };
 
-static int __init dns323_dev_id(void)
-{
-	u32 dev, rev;
-
-	orion5x_pcie_id(&dev, &rev);
-
-	return dev;
-}
-
 static int __init dns323_pci_init(void)
 {
-	/* The 5182 doesn't really use its PCI bus, and initialising PCI
+	/* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI
 	 * gets in the way of initialising the SATA controller.
 	 */
-	if (machine_is_dns323() && dns323_dev_id() != MV88F5182_DEV_ID)
+	if (machine_is_dns323() && system_rev == DNS323_REV_A1)
 		pci_common_init(&dns323_pci);
 
 	return 0;
@@ -221,7 +236,7 @@ static int __init dns323_read_mac_addr(void)
 	}
 
 	iounmap(mac_page);
-	printk("DNS323: Found ethernet MAC address: ");
+	printk("DNS-323: Found ethernet MAC address: ");
 	for (i = 0; i < 6; i++)
 		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
 
@@ -259,12 +274,11 @@ static int dns323_gpio_blink_set(unsigned gpio, int state,
 	return 0;
 }
 
-static struct gpio_led dns323_leds[] = {
+static struct gpio_led dns323ab_leds[] = {
 	{
 		.name = "power:blue",
 		.gpio = DNS323_GPIO_LED_POWER2,
-		.default_trigger = "timer",
-		.active_low = 1,
+		.default_trigger = "default-on",
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -276,9 +290,34 @@ static struct gpio_led dns323_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data dns323_led_data = {
-	.num_leds	= ARRAY_SIZE(dns323_leds),
-	.leds		= dns323_leds,
+
+static struct gpio_led dns323c_leds[] = {
+	{
+		.name = "power:blue",
+		.gpio = DNS323C_GPIO_LED_POWER,
+		.default_trigger = "timer",
+		.active_low = 1,
+	}, {
+		.name = "right:amber",
+		.gpio = DNS323C_GPIO_LED_RIGHT_AMBER,
+		.active_low = 1,
+	}, {
+		.name = "left:amber",
+		.gpio = DNS323C_GPIO_LED_LEFT_AMBER,
+		.active_low = 1,
+	},
+};
+
+
+static struct gpio_led_platform_data dns323ab_led_data = {
+	.num_leds	= ARRAY_SIZE(dns323ab_leds),
+	.leds		= dns323ab_leds,
+	.gpio_blink_set = dns323_gpio_blink_set,
+};
+
+static struct gpio_led_platform_data dns323c_led_data = {
+	.num_leds	= ARRAY_SIZE(dns323c_leds),
+	.leds		= dns323c_leds,
 	.gpio_blink_set = dns323_gpio_blink_set,
 };
 
@@ -286,7 +325,7 @@ static struct platform_device dns323_gpio_leds = {
 	.name		= "leds-gpio",
 	.id		= -1,
 	.dev		= {
-		.platform_data	= &dns323_led_data,
+		.platform_data	= &dns323ab_led_data,
 	},
 };
 
@@ -294,7 +333,7 @@ static struct platform_device dns323_gpio_leds = {
  * GPIO Attached Keys
  */
 
-static struct gpio_keys_button dns323_buttons[] = {
+static struct gpio_keys_button dns323ab_buttons[] = {
 	{
 		.code		= KEY_RESTART,
 		.gpio		= DNS323_GPIO_KEY_RESET,
@@ -308,9 +347,23 @@ static struct gpio_keys_button dns323_buttons[] = {
 	},
 };
 
-static struct gpio_keys_platform_data dns323_button_data = {
-	.buttons	= dns323_buttons,
-	.nbuttons	= ARRAY_SIZE(dns323_buttons),
+static struct gpio_keys_platform_data dns323ab_button_data = {
+	.buttons	= dns323ab_buttons,
+	.nbuttons	= ARRAY_SIZE(dns323ab_buttons),
+};
+
+static struct gpio_keys_button dns323c_buttons[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= DNS323C_GPIO_KEY_POWER,
+		.desc		= "Power Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data dns323c_button_data = {
+	.buttons	= dns323c_buttons,
+	.nbuttons	= ARRAY_SIZE(dns323c_buttons),
 };
 
 static struct platform_device dns323_button_device = {
@@ -318,7 +371,7 @@ static struct platform_device dns323_button_device = {
 	.id		= -1,
 	.num_resources	= 0,
 	.dev		= {
-		.platform_data	= &dns323_button_data,
+		.platform_data	= &dns323ab_button_data,
 	},
 };
 
@@ -332,7 +385,7 @@ static struct mv_sata_platform_data dns323_sata_data = {
 /****************************************************************************
  * General Setup
  */
-static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = {
+static struct orion5x_mpp_mode dns323a_mpp_modes[] __initdata = {
 	{  0, MPP_PCIE_RST_OUTn },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
@@ -356,7 +409,7 @@ static struct orion5x_mpp_mode dns323_mv88f5181_mpp_modes[] __initdata = {
 	{ -1 },
 };
 
-static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
+static struct orion5x_mpp_mode dns323b_mpp_modes[] __initdata = {
 	{  0, MPP_UNUSED },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
@@ -380,15 +433,57 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
 	{ -1 },
 };
 
+static struct orion5x_mpp_mode dns323c_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },		/* ? input */
+	{  1, MPP_GPIO },		/* input power switch (0 = pressed) */
+	{  2, MPP_GPIO },		/* output power off */
+	{  3, MPP_UNUSED },		/* ? output */
+	{  4, MPP_UNUSED },		/* ? output */
+	{  5, MPP_UNUSED },		/* ? output */
+	{  6, MPP_UNUSED },		/* ? output */
+	{  7, MPP_UNUSED },		/* ? output */
+	{  8, MPP_GPIO },		/* i/o right amber LED */
+	{  9, MPP_GPIO },		/* i/o left amber LED */
+	{ 10, MPP_GPIO },		/* input */
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_SATA_LED },
+	{ 13, MPP_SATA_LED },
+	{ 14, MPP_SATA_LED },
+	{ 15, MPP_SATA_LED },
+	{ 16, MPP_UNUSED },
+	{ 17, MPP_GPIO },		/* power button LED */
+	{ 18, MPP_GPIO },		/* fan speed bit 0 */
+	{ 19, MPP_GPIO },		/* fan speed bit 1 */
+	{ -1 },
+};
+
+/* Rev C1 Fan speed notes:
+ *
+ * The fan is controlled by 2 GPIOs on this board. The settings
+ * of the bits is as follow:
+ *
+ *  GPIO 18    GPIO 19    Fan
+ *
+ *    0          0        stopped
+ *    0          1        low speed
+ *    1          0        high speed
+ *    1          1        don't do that (*)
+ *
+ * (*) I think the two bits control two feed-in resistors into a fixed
+ *     PWN circuit, setting both bits will basically go a 'bit' faster
+ *     than high speed, but d-link doesn't do it and you may get out of
+ *     HW spec so don't do it.
+ */
+
 /*
- * On the DNS-323 the following devices are attached via I2C:
+ * On the DNS-323 A1 and B1 the following devices are attached via I2C:
  *
  *  i2c addr | chip        | description
  *  0x3e     | GMT G760Af  | fan speed PWM controller
  *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
  *  0x68     | ST M41T80   | RTC w/ alarm
  */
-static struct i2c_board_info __initdata dns323_i2c_devices[] = {
+static struct i2c_board_info __initdata dns323ab_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("g760a", 0x3e),
 	}, {
@@ -398,36 +493,140 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = {
 	},
 };
 
+/*
+ * On the DNS-323 C1 the following devices are attached via I2C:
+ *
+ *  i2c addr | chip        | description
+ *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
+ *  0x68     | ST M41T80   | RTC w/ alarm
+ */
+static struct i2c_board_info __initdata dns323c_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("lm75", 0x48),
+	}, {
+		I2C_BOARD_INFO("m41t80", 0x68),
+	},
+};
+
 /* DNS-323 rev. A specific power off method */
 static void dns323a_power_off(void)
 {
-	pr_info("%s: triggering power-off...\n", __func__);
+	pr_info("DNS-323: Triggering power-off...\n");
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 }
 
 /* DNS-323 rev B specific power off method */
 static void dns323b_power_off(void)
 {
-	pr_info("%s: triggering power-off...\n", __func__);
+	pr_info("DNS-323: Triggering power-off...\n");
 	/* Pin has to be changed to 1 and back to 0 to do actual power off. */
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 	mdelay(100);
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
 }
 
+/* DNS-323 rev. C specific power off method */
+static void dns323c_power_off(void)
+{
+	pr_info("DNS-323: Triggering power-off...\n");
+	gpio_set_value(DNS323C_GPIO_POWER_OFF, 1);
+}
+
+static int dns323c_phy_fixup(struct phy_device *phy)
+{
+	phy->dev_flags |= MARVELL_PHY_M1118_DNS323_LEDS;
+
+	return 0;
+}
+
+static int __init dns323_identify_rev(void)
+{
+	u32 dev, rev, i, reg;
+
+	pr_debug("DNS-323: Identifying board ... \n");
+
+	/* Rev A1 has a 5181 */
+	orion5x_pcie_id(&dev, &rev);
+	if (dev == MV88F5181_DEV_ID) {
+		pr_debug("DNS-323: 5181 found, board is A1\n");
+		return DNS323_REV_A1;
+	}
+	pr_debug("DNS-323: 5182 found, board is B1 or C1, checking PHY...\n");
+
+	/* Rev B1 and C1 both have 5182, let's poke at the eth PHY. This is
+	 * a bit gross but we want to do that without links into the eth
+	 * driver so let's poke at it directly. We default to rev B1 in
+	 * case the accesses fail
+	 */
+
+#define ETH_SMI_REG		(ORION5X_ETH_VIRT_BASE + 0x2000 + 0x004)
+#define  SMI_BUSY		0x10000000
+#define  SMI_READ_VALID		0x08000000
+#define  SMI_OPCODE_READ	0x04000000
+#define  SMI_OPCODE_WRITE	0x00000000
+
+	for (i = 0; i < 1000; i++) {
+		reg = readl(ETH_SMI_REG);
+		if (!(reg & SMI_BUSY))
+			break;
+	}
+	if (i >= 1000) {
+		pr_warning("DNS-323: Timeout accessing PHY, assuming rev B1\n");
+		return DNS323_REV_B1;
+	}
+	writel((3 << 21)	/* phy ID reg */ |
+	       (8 << 16)	/* phy addr */ |
+	       SMI_OPCODE_READ, ETH_SMI_REG);
+	for (i = 0; i < 1000; i++) {
+		reg = readl(ETH_SMI_REG);
+		if (reg & SMI_READ_VALID)
+			break;
+	}
+	if (i >= 1000) {
+		pr_warning("DNS-323: Timeout reading PHY, assuming rev B1\n");
+		return DNS323_REV_B1;
+	}
+	pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff);
+
+	/* Note: the Marvell tools mask the ID with 0x3f0 before comparison
+	 * but I don't see that making a difference here, at least with
+	 * any known Marvell PHY ID
+	 */
+	switch(reg & 0xfff0) {
+	case 0x0cc0: /* MV88E1111 */
+		return DNS323_REV_B1;
+	case 0x0e10: /* MV88E1118 */
+		return DNS323_REV_C1;
+	default:
+		pr_warning("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
+			   reg & 0xffff);
+	}
+	return DNS323_REV_B1;
+}
+
 static void __init dns323_init(void)
 {
 	/* Setup basic Orion functions. Need to be called early. */
 	orion5x_init();
 
+	/* Identify revision */
+	system_rev = dns323_identify_rev();
+	pr_info("DNS-323: Identified HW revision %c1\n", 'A' + system_rev);
+
 	/* Just to be tricky, the 5182 has a completely different
 	 * set of MPP modes to the 5181.
 	 */
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
-		orion5x_mpp_conf(dns323_mv88f5182_mpp_modes);
-	else {
-		orion5x_mpp_conf(dns323_mv88f5181_mpp_modes);
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		orion5x_mpp_conf(dns323a_mpp_modes);
 		writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
+		break;
+	case DNS323_REV_B1:
+		orion5x_mpp_conf(dns323b_mpp_modes);
+		break;
+	case DNS323_REV_C1:
+		orion5x_mpp_conf(dns323c_mpp_modes);
+		break;
 	}
 
 	/* setup flash mapping
@@ -436,60 +635,101 @@ static void __init dns323_init(void)
 	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
 	platform_device_register(&dns323_nor_flash);
 
-	/* The 5181 power LED is active low and requires
-	 * DNS323_GPIO_LED_POWER1 to also be low.
-	 */
-	if (dns323_dev_id() == MV88F5181_DEV_ID) {
-		dns323_leds[0].active_low = 1;
-		gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
-		gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+	/* Sort out LEDs, Buttons and i2c devices */
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		/* The 5181 power LED is active low and requires
+		 * DNS323_GPIO_LED_POWER1 to also be low.
+		 */
+		 dns323ab_leds[0].active_low = 1;
+		 gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
+		 gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+		/* Fall through */
+	case DNS323_REV_B1:
+		i2c_register_board_info(0, dns323ab_i2c_devices,
+				ARRAY_SIZE(dns323ab_i2c_devices));
+		break;
+	case DNS323_REV_C1:
+		/* Hookup LEDs & Buttons */
+		dns323_gpio_leds.dev.platform_data = &dns323c_led_data;
+		dns323_button_device.dev.platform_data = &dns323c_button_data;
+
+		/* Hookup i2c devices and fan driver */
+		i2c_register_board_info(0, dns323c_i2c_devices,
+				ARRAY_SIZE(dns323c_i2c_devices));
+		platform_device_register_simple("dns323c-fan", 0, NULL, 0);
+
+		/* Register fixup for the PHY LEDs */
+		phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118,
+					   MARVELL_PHY_ID_MASK,
+					   dns323c_phy_fixup);
 	}
 
 	platform_device_register(&dns323_gpio_leds);
-
 	platform_device_register(&dns323_button_device);
 
-	i2c_register_board_info(0, dns323_i2c_devices,
-				ARRAY_SIZE(dns323_i2c_devices));
-
 	/*
 	 * Configure peripherals.
 	 */
 	if (dns323_read_mac_addr() < 0)
-		printk("DNS323: Failed to read MAC address\n");
-
+		printk("DNS-323: Failed to read MAC address\n");
 	orion5x_ehci0_init();
 	orion5x_eth_init(&dns323_eth_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
-	/* The 5182 has its SATA controller on-chip, and needs its own little
-	 * init routine.
-	 */
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
+	/* Remaining GPIOs */
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
+		pm_power_off = dns323a_power_off;
+		break;
+	case DNS323_REV_B1:
+		/* 5182 built-in SATA init */
 		orion5x_sata_init(&dns323_sata_data);
 
-	/* The 5182 has flag to indicate the system is up. Without this flag
-	 * set, power LED will flash and cannot be controlled via leds-gpio.
-	 */
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
-		gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
-
-	/* Register dns323 specific power-off method */
-	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
-	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
-		pr_err("DNS323: failed to setup power-off GPIO\n");
-	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		/* The DNS323 rev B1 has flag to indicate the system is up.
+		 * Without this flag set, power LED will flash and cannot be
+		 * controlled via leds-gpio.
+		 */
+		if (gpio_request(DNS323_GPIO_SYSTEM_UP, "SYS_READY") == 0)
+			gpio_direction_output(DNS323_GPIO_SYSTEM_UP, 1);
+
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
 		pm_power_off = dns323b_power_off;
-	else
-		pm_power_off = dns323a_power_off;
+		break;
+	case DNS323_REV_C1:
+		/* 5182 built-in SATA init */
+		orion5x_sata_init(&dns323_sata_data);
+
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
+		pm_power_off = dns323c_power_off;
+
+		/* Now, -this- should theorically be done by the sata_mv driver
+		 * once I figure out what's going on there. Maybe the behaviour
+		 * of the LEDs should be somewhat passed via the platform_data.
+		 * for now, just whack the register and make the LEDs happy
+		 *
+		 * Note: AFAIK, rev B1 needs the same treatement but I'll let
+		 * somebody else test it.
+		 */
+		writel(0x5, ORION5X_SATA_VIRT_BASE | 0x2c);
+		break;
+	}
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(DNS323, "D-Link DNS-323")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= dns323_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index b24ee0c2cd61..ba98459f44b0 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -251,8 +251,6 @@ static void __init edmini_v2_init(void)
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
 	/* Maintainer: Christopher Moore <moore@free.fr> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= edmini_v2_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index 91e0e39bb23f..5e3bf5b68aec 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,12 +10,11 @@
 
 #include <mach/orion5x.h>
 
-	.macro  addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
-	ldrne	\rx, =ORION5X_REGS_VIRT_BASE
-	orr	\rx, \rx, #0x00012000
+	.macro  addruart, rp, rv
+	ldr	\rp, =ORION5X_REGS_PHYS_BASE
+	ldr	\rv, =ORION5X_REGS_VIRT_BASE
+	orr	\rp, \rp, #0x00012000
+	orr	\rv, \rv, #0x00012000
 	.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
index 60e734c10458..a1d6e46ab035 100644
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -25,6 +25,8 @@ static inline void arch_reset(char mode, const char *cmd)
 	 */
 	orion5x_setbits(RSTOUTn_MASK, (1 << 2));
 	orion5x_setbits(CPU_SOFT_RESET, 1);
+	mdelay(200);
+	orion5x_clrbits(CPU_SOFT_RESET, 1);
 }
 
 
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index dfbb68df7b09..4be9aa08de69 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -379,8 +379,6 @@ static void __init kurobox_pro_init(void)
 #ifdef CONFIG_MACH_KUROBOX_PRO
 MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
@@ -393,8 +391,6 @@ MACHINE_END
 #ifdef CONFIG_MACH_LINKSTATION_PRO
 MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 8e569be6e2c7..437364b7168e 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -265,8 +265,6 @@ static void __init ls_hgl_init(void)
 
 MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
 	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= ls_hgl_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index c704f056de1e..ab9b0cf0a90b 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -267,8 +267,6 @@ static void __init lsmini_init(void)
 #ifdef CONFIG_MACH_LINKSTATION_MINI
 MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
 	/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= lsmini_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 61c086b66723..2f0e16cd7e81 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -261,8 +261,6 @@ static void __init mss2_init(void)
 
 MACHINE_START(MSS2, "Maxtor Shared Storage II")
 	/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= mss2_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 97c9ccb2ac60..b3d90f25de9f 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -229,8 +229,6 @@ static void __init mv2120_init(void)
 /* Warning: HP uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(MV2120, "HP Media Vault mv2120")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= mv2120_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 7bd6283476f9..d6665b31665f 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -419,8 +419,6 @@ static void __init net2big_init(void)
 
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(NET2BIG, "LaCie 2Big Network")
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= net2big_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 9c1ca41730ba..f4c26fd731f4 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -169,8 +169,6 @@ subsys_initcall(rd88f5181l_fxo_pci_init);
 
 MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
 	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f5181l_fxo_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index ee1399ff0ced..b5942909bab0 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -181,8 +181,6 @@ subsys_initcall(rd88f5181l_ge_pci_init);
 
 MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f5181l_ge_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index a04f9e4b633a..165ed87029b2 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -305,8 +305,6 @@ static void __init rd88f5182_init(void)
 
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f5182_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 7737cf9a8f50..02ff45f3e2e3 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -123,8 +123,6 @@ subsys_initcall(rd88f6183ap_ge_pci_init);
 
 MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f6183ap_ge_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 0b101d7d41c2..4403fae5ab0e 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -358,8 +358,6 @@ static void __init tsp2_init(void)
 
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= tsp2_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 9d6890514199..1e196129d763 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -322,8 +322,6 @@ static void __init qnap_ts209_init(void)
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts209_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index d85588ac7ef8..428af2046e36 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -311,8 +311,6 @@ static void __init qnap_ts409_init(void)
 
 MACHINE_START(TS409, "QNAP TS-409")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts409_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 5041d1bc26b1..16f1bd5324be 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -216,6 +216,7 @@ static struct mtd_partition ts78xx_ts_nand_parts[] = {
 
 static struct platform_nand_data ts78xx_ts_nand_data = {
 	.chip	= {
+		.nr_chips		= 1,
 		.part_probe_types	= ts_nand_part_probes,
 		.partitions		= ts78xx_ts_nand_parts,
 		.nr_partitions		= ARRAY_SIZE(ts78xx_ts_nand_parts),
@@ -549,8 +550,6 @@ static void __init ts78xx_init(void)
 
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
 	/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= ts78xx_init,
 	.map_io		= ts78xx_map_io,
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 69208217b220..7994d6ec08a8 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -172,8 +172,6 @@ subsys_initcall(wnr854t_pci_init);
 
 MACHINE_START(WNR854T, "Netgear WNR854T")
 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= wnr854t_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index f9f222ebb7ed..a5989b7eb53e 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -260,8 +260,6 @@ subsys_initcall(wrt350n_v2_pci_init);
 
 MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.phys_io	= ORION5X_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= wrt350n_v2_init,
 	.map_io		= orion5x_map_io,
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 45734bb880a8..63399755f199 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -264,8 +264,6 @@ extern struct sys_timer pnx4008_timer;
 
 MACHINE_START(PNX4008, "Philips PNX4008")
 	/* Maintainer: MontaVista Software Inc. */
-	.phys_io 		= 0x40090000,
-	.io_pg_offst 		= (0xf4090000 >> 18) & 0xfffc,
 	.boot_params		= 0x80000100,
 	.map_io 		= pnx4008_map_io,
 	.init_irq 		= pnx4008_init_irq,
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 6ca8bd30bf46..931afebaf064 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,12 +11,10 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		mov	\rx, #0x00090000
-		addeq	\rx, \rx, #0x40000000
-		addne	\rx, \rx, #0xf4000000
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00090000
+		add	\rv, \rp, #0xf4000000	@ virtual
+		add	\rp, \rp, #0x40000000	@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
index 2ad398378aed..31b65ee07b0b 100644
--- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3b51741a4810..dd235ecc9d6c 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -8,19 +8,16 @@ config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
 	select PXA25x
 	select SA1111
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
 	select PXA27x
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_ZYLONITE
 	bool
 	select PXA3xx
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_ZYLONITE300
 	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
@@ -44,6 +41,10 @@ config MACH_TAVOREVB
 	select PXA3xx
 	select CPU_PXA930
 
+config MACH_TAVOREVB3
+	bool "PXA95x Development Platform (aka TavorEVB III)"
+	select CPU_PXA950
+
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select PXA3xx
@@ -61,7 +62,6 @@ config ARCH_VIPER
 	select ISA
 	select I2C_GPIO
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 	select PXA_HAVE_ISA_IRQS
 	select ARCOM_PCMCIA
 
@@ -69,7 +69,6 @@ config MACH_ARCOM_ZEUS
 	bool "Arcom/Eurotech ZEUS SBC"
 	select PXA27x
 	select ISA
-	select PXA_HAVE_BOARD_IRQS
 	select PXA_HAVE_ISA_IRQS
 	select ARCOM_PCMCIA
 
@@ -77,7 +76,6 @@ config MACH_BALLOON3
 	bool "Balloon 3 board"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_CSB726
 	bool "Enable Cogent CSB726 System On a Module"
@@ -140,13 +138,11 @@ config MACH_INTELMOTE2
 	bool "Intel Mote 2 Platform"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_STARGATE2
 	bool "Intel Stargate 2 Platform"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_XCEP
 	bool "Iskratel Electronics XCEP"
@@ -206,13 +202,11 @@ config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
 	select PXA27x
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
@@ -238,6 +232,16 @@ config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
 	select PXA27x
 
+config MACH_COLIBRI_PXA270_EVALBOARD
+	bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
+	depends on MACH_COLIBRI
+
+config MACH_COLIBRI_PXA270_INCOME
+	bool "Income s.r.o. PXA270 SBC"
+	depends on MACH_COLIBRI
+	select PXA27x
+	select HAVE_PWM
+
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
 	select PXA3xx
@@ -263,7 +267,6 @@ config MACH_H4700
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_H5000
 	bool "HP iPAQ h5000"
@@ -278,7 +281,6 @@ config MACH_MAGICIAN
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
@@ -296,7 +298,6 @@ config PXA_EZX
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_EZX_A780
 	bool "Motorola EZX A780"
@@ -336,6 +337,9 @@ config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
 	select HAVE_PWM
 
+config MACH_PALM27X
+	bool
+
 config MACH_PALMTE2
 	bool "Palm Tungsten|E2"
 	default y
@@ -360,6 +364,7 @@ config MACH_PALMT5
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 	  handheld computer.
@@ -370,6 +375,7 @@ config MACH_PALMTX
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on a Palm T|X
 	  handheld computer.
@@ -380,6 +386,7 @@ config MACH_PALMZ72
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
@@ -390,6 +397,7 @@ config MACH_PALMLD
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	help
 	  Say Y here if you intend to run this kernel on a Palm LifeDrive
 	  handheld computer.
@@ -447,23 +455,19 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
-	select SHARPSL_PM_MAX1111
-
-config SHARPSL_PM_MAX1111
-	bool
-	depends on !CORGI_SSP_DEPRECATED
-	select HWMON
-	select SENSORS_MAX1111
+config PXA_SHARPSL_DETECT_MACH_ID
+	bool "Detect machine ID at run-time in the decompressor"
+	depends on PXA_SHARPSL
+	help
+	  Say Y here if you want the zImage decompressor to detect
+	  the Zaurus machine ID at run-time. For latest kexec-based
+	  boot loader, this is not necessary.
 
 config MACH_POODLE
 	bool "Enable Sharp SL-5600 (Poodle) Support"
 	depends on PXA_SHARPSL
 	select PXA25x
 	select SHARP_LOCOMO
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_CORGI
 	bool "Enable Sharp SL-C700 (Corgi) Support"
@@ -508,7 +512,25 @@ config MACH_TOSA
 	bool "Enable Sharp SL-6000x (Tosa) Support"
 	depends on PXA_SHARPSL
 	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
+
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
+
+config TOSA_USE_EXT_KEYCODES
+	bool "Tosa keyboard: use extended keycodes"
+	depends on MACH_TOSA
+	default n
+	help
+	  Say Y here to enable the tosa keyboard driver to generate extended
+	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+	  by either console keyboard driver or by Kdrive keybd driver.
+
+	  Say Y only if you know, what you are doing!
 
 config MACH_ICONTROL
 	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
@@ -518,7 +540,6 @@ config MACH_ICONTROL
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
 
 config MACH_E330
 	bool "Toshiba e330"
@@ -572,7 +593,6 @@ config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
 	select PXA27x
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
 
 endmenu
 
@@ -609,6 +629,7 @@ config CPU_PXA300
 config CPU_PXA310
 	bool
 	select CPU_PXA300
+	select PXA310_ULPI if USB_ULPI
 	help
 	  PXA310 (codename Monahans-LV)
 
@@ -648,30 +669,20 @@ config PXA_SHARP_Cxx00
 	help
 	  Enable common support for Sharp Cxx00 models
 
-config TOSA_BT
-	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA
-	select RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
-	bool "Tosa keyboard: use extended keycodes"
-	depends on MACH_TOSA
-	default n
-	help
-	  Say Y here to enable the tosa keyboard driver to generate extended
-	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-	  by either console keyboard driver or by Kdrive keybd driver.
-
-	  Say Y only if you know, what you are doing!
-
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
+	select SHARPSL_PM_MAX1111
 
-config PXA_HAVE_BOARD_IRQS
+config SHARPSL_PM_MAX1111
 	bool
+	select HWMON
+	select SENSORS_MAX1111
 
 config PXA_HAVE_ISA_IRQS
 	bool
 
+config PXA310_ULPI
+	bool
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index b8f1f4bc7ca7..e2f89c2c6f49 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -18,7 +18,7 @@ endif
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
 obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
+obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
@@ -32,6 +32,7 @@ obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
 obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_TAVOREVB3)	+= tavorevb3.o
 obj-$(CONFIG_MACH_SAAR)		+= saar.o
 
 # 3rd Party Dev Platforms
@@ -51,14 +52,16 @@ obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_INTELMOTE2)	+= stargate2.o
 obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_XCEP)         += xcep.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
 obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)	+= colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
 obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o
@@ -73,6 +76,7 @@ obj-$(CONFIG_PXA_EZX)           += ezx.o
 obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
 obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
+obj-$(CONFIG_MACH_PALM27X)	+= palm27x.o
 obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
@@ -84,12 +88,6 @@ obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_E330)		+= e330.o
-obj-$(CONFIG_MACH_E350)		+= e350.o
-obj-$(CONFIG_MACH_E740)		+= e740.o
-obj-$(CONFIG_MACH_E750)		+= e750.o
-obj-$(CONFIG_MACH_E400)		+= e400.o
-obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f3b5ace815e5..21e188901935 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -22,9 +22,14 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/ioport.h>
+#include <linux/ucb1400.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/types.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/physmap.h>
+#include <linux/regulator/max1586.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -51,6 +56,23 @@
 #include "generic.h"
 #include "devices.h"
 
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long balloon3_pin_config[] __initdata = {
+	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* Reset, configured as GPIO wakeup source */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
+
+/******************************************************************************
+ * Compatibility: Parameter parsing
+ ******************************************************************************/
 static unsigned long balloon3_irq_enabled;
 
 static unsigned long balloon3_features_present =
@@ -73,84 +95,124 @@ int __init parse_balloon3_features(char *arg)
 }
 early_param("balloon3_features", parse_balloon3_features);
 
-static void balloon3_mask_irq(unsigned int irq)
-{
-	int balloon3_irq = (irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled &= ~(1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static void balloon3_unmask_irq(unsigned int irq)
-{
-	int balloon3_irq = (irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled |= (1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static struct irq_chip balloon3_irq_chip = {
-	.name		= "FPGA",
-	.ack		= balloon3_mask_irq,
-	.mask		= balloon3_mask_irq,
-	.unmask		= balloon3_unmask_irq,
+/******************************************************************************
+ * Compact Flash slot
+ ******************************************************************************/
+#if	defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static unsigned long balloon3_cf_pin_config[] __initdata = {
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
 };
 
-static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void __init balloon3_cf_init(void)
 {
-	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-					balloon3_irq_enabled;
+	if (!balloon3_has(BALLOON3_FEATURE_CF))
+		return;
 
-	do {
-		/* clear useless edge notification */
-		if (desc->chip->ack)
-			desc->chip->ack(BALLOON3_AUX_NIRQ);
-		while (pending) {
-			irq = BALLOON3_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-			pending &= pending - 1;
-		}
-		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-				balloon3_irq_enabled;
-	} while (pending);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
 }
+#else
+static inline void balloon3_cf_init(void) {}
+#endif
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition balloon3_nor_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
 
-static void __init balloon3_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-	/* setup extra Balloon3 irqs */
-	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
-		set_irq_chip(irq, &balloon3_irq_chip);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+static struct physmap_flash_data balloon3_flash_data[] = {
+	{
+		.width		= 2,	/* bankwidth in bytes */
+		.parts		= balloon3_nor_partitions,
+		.nr_parts	= ARRAY_SIZE(balloon3_nor_partitions)
 	}
+};
 
-	set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
-	set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+static struct resource balloon3_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
 
-	pr_debug("%s: chained handler installed - irq %d automatically "
-		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
+static struct platform_device balloon3_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &balloon3_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = balloon3_flash_data,
+	},
+};
+static void __init balloon3_nor_init(void)
+{
+	platform_device_register(&balloon3_flash);
 }
-
-static unsigned long balloon3_ac97_pin_config[] = {
+#else
+static inline void balloon3_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static unsigned long balloon3_ac97_pin_config[] __initdata = {
 	GPIO28_AC97_BITCLK,
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
 	GPIO113_AC97_nRESET,
+	GPIO95_GPIO,
 };
 
-static void balloon3_backlight_power(int on)
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+	.irq		= IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
+};
+
+
+static struct platform_device balloon3_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &vpac270_ucb1400_pdata,
+	},
+};
+
+static void __init balloon3_ts_init(void)
 {
-	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
-	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
+	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
+		return;
 
-static unsigned long balloon3_lcd_pin_config[] = {
-	/* LCD - 16bpp Active TFT */
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
+	pxa_set_ac97_info(NULL);
+	platform_device_register(&balloon3_ucb1400_device);
+}
+#else
+static inline void balloon3_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static unsigned long balloon3_lcd_pin_config[] __initdata = {
 	GPIOxx_LCD_TFT_16BPP,
-
-	GPIO99_GPIO,		/* Backlight */
+	GPIO99_GPIO,
 };
 
 static struct pxafb_mode_info balloon3_lcd_modes[] = {
@@ -169,14 +231,56 @@ static struct pxafb_mode_info balloon3_lcd_modes[] = {
 	},
 };
 
-static struct pxafb_mach_info balloon3_pxafb_info = {
+static struct pxafb_mach_info balloon3_lcd_screen = {
 	.modes			= balloon3_lcd_modes,
 	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_backlight_power	= balloon3_backlight_power,
 };
 
-static unsigned long balloon3_mmc_pin_config[] = {
+static void balloon3_backlight_power(int on)
+{
+	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static void __init balloon3_lcd_init(void)
+{
+	int ret;
+
+	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
+		return;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+
+	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
+	if (ret) {
+		pr_err("Requesting BKL-ON GPIO failed!\n");
+		goto err;
+	}
+
+	ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+	if (ret) {
+		pr_err("Setting BKL-ON GPIO direction failed!\n");
+		goto err2;
+	}
+
+	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
+	set_pxa_fb_info(&balloon3_lcd_screen);
+	return;
+
+err2:
+	gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
+err:
+	return;
+}
+#else
+static inline void balloon3_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static unsigned long balloon3_mmc_pin_config[] __initdata = {
 	GPIO32_MMC_CLK,
 	GPIO92_MMC_DAT_0,
 	GPIO109_MMC_DAT_1,
@@ -185,86 +289,112 @@ static unsigned long balloon3_mmc_pin_config[] = {
 	GPIO112_MMC_CMD,
 };
 
-static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		pr_debug("%s: on\n", __func__);
-		/* FIXME something to prod here? */
-	} else {
-		pr_debug("%s: off\n", __func__);
-		/* FIXME something to prod here? */
-	}
-}
-
 static struct pxamci_platform_data balloon3_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.setpower 	= balloon3_mci_setpower,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
+	.detect_delay_ms	= 200,
 };
 
-static int balloon3_udc_is_connected(void)
+static void __init balloon3_mmc_init(void)
 {
-	pr_debug("%s: udc connected\n", __func__);
-	return 1;
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
+	pxa_set_mci_info(&balloon3_mci_platform_data);
 }
-
+#else
+static inline void balloon3_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
 static void balloon3_udc_command(int cmd)
 {
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
-		pr_debug("%s: connect\n", __func__);
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
 		UP2OCR &= ~UP2OCR_DPPUE;
-		pr_debug("%s: disconnect\n", __func__);
-		break;
-	}
 }
 
-static struct pxa2xx_udc_mach_info balloon3_udc_info = {
-	.udc_is_connected = balloon3_udc_is_connected,
-	.udc_command      = balloon3_udc_command,
+static int balloon3_udc_is_connected(void)
+{
+	return 1;
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
+	.udc_command		= balloon3_udc_command,
+	.udc_is_connected	= balloon3_udc_is_connected,
+	.gpio_pullup		= -1,
 };
 
+static void __init balloon3_udc_init(void)
+{
+	pxa_set_udc_info(&balloon3_udc_info);
+	platform_device_register(&balloon3_gpio_vbus);
+}
+#else
+static inline void balloon3_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
 static struct pxaficp_platform_data balloon3_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_cap	= IR_FIRMODE | IR_SIRMODE | IR_OFF,
 };
 
-static unsigned long balloon3_ohci_pin_config[] = {
+static void __init balloon3_irda_init(void)
+{
+	pxa_set_ficp_info(&balloon3_ficp_platform_data);
+}
+#else
+static inline void balloon3_irda_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static unsigned long balloon3_uhc_pin_config[] __initdata = {
 	GPIO88_USBH1_PWR,
 	GPIO89_USBH1_PEN,
 };
 
-static struct pxaohci_platform_data balloon3_ohci_platform_data = {
+static struct pxaohci_platform_data balloon3_ohci_info = {
 	.port_mode	= PMM_PERPORT_MODE,
 	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
-static unsigned long balloon3_pin_config[] __initdata = {
-	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Wakeup GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* NAND & IDLE LED GPIOs */
-	GPIO9_GPIO,
-	GPIO10_GPIO,
+static void __init balloon3_uhc_init(void)
+{
+	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
+		return;
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
+	pxa_set_ohci_info(&balloon3_ohci_info);
+}
+#else
+static inline void balloon3_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static unsigned long balloon3_led_pin_config[] __initdata = {
+	GPIO9_GPIO,	/* NAND activity LED */
+	GPIO10_GPIO,	/* Heartbeat LED */
 };
 
-static struct gpio_led balloon3_gpio_leds[] = {
+struct gpio_led balloon3_gpio_leds[] = {
 	{
 		.name			= "balloon3:green:idle",
 		.default_trigger	= "heartbeat",
 		.gpio			= BALLOON3_GPIO_LED_IDLE,
 		.active_low		= 1,
-	},
-	{
+	}, {
 		.name			= "balloon3:green:nand",
 		.default_trigger	= "nand-disk",
 		.gpio			= BALLOON3_GPIO_LED_NAND,
@@ -272,61 +402,393 @@ static struct gpio_led balloon3_gpio_leds[] = {
 	},
 };
 
-static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
+static struct gpio_led_platform_data balloon3_gpio_led_info = {
 	.leds		= balloon3_gpio_leds,
 	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
 };
 
-static struct platform_device balloon3led_device = {
+static struct platform_device balloon3_leds = {
 	.name	= "leds-gpio",
-	.id	= -1,
+	.id	= 0,
 	.dev	= {
-		.platform_data	= &balloon3_gpio_leds_platform_data,
+		.platform_data	= &balloon3_gpio_led_info,
+	}
+};
+
+struct gpio_led balloon3_pcf_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:led0",
+		.gpio			= BALLOON3_PCF_GPIO_LED0,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:green:led1",
+		.gpio			= BALLOON3_PCF_GPIO_LED1,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led2",
+		.gpio			= BALLOON3_PCF_GPIO_LED2,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led3",
+		.gpio			= BALLOON3_PCF_GPIO_LED3,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led4",
+		.gpio			= BALLOON3_PCF_GPIO_LED4,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:orange:led5",
+		.gpio			= BALLOON3_PCF_GPIO_LED5,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:red:led6",
+		.gpio			= BALLOON3_PCF_GPIO_LED6,
+		.active_low		= 1,
+	}, {
+		.name			= "balloon3:red:led7",
+		.gpio			= BALLOON3_PCF_GPIO_LED7,
+		.active_low		= 1,
 	},
 };
 
-static void __init balloon3_init(void)
+static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
+	.leds		= balloon3_pcf_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_pcf_gpio_leds),
+};
+
+static struct platform_device balloon3_pcf_leds = {
+	.name	= "leds-gpio",
+	.id	= 1,
+	.dev	= {
+		.platform_data	= &balloon3_pcf_gpio_led_info,
+	}
+};
+
+static void __init balloon3_leds_init(void)
 {
-	pr_info("Initialising Balloon3\n");
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
+	platform_device_register(&balloon3_leds);
+	platform_device_register(&balloon3_pcf_leds);
+}
+#else
+static inline void balloon3_leds_init(void) {}
+#endif
 
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+/******************************************************************************
+ * FPGA IRQ
+ ******************************************************************************/
+static void balloon3_mask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled &= ~(1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
 
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
+static void balloon3_unmask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled |= (1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+	.name		= "FPGA",
+	.ack		= balloon3_mask_irq,
+	.mask		= balloon3_mask_irq,
+	.unmask		= balloon3_unmask_irq,
+};
 
+static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+					balloon3_irq_enabled;
+	do {
+		/* clear useless edge notification */
+		if (desc->chip->ack)
+			desc->chip->ack(BALLOON3_AUX_NIRQ);
+		while (pending) {
+			irq = BALLOON3_IRQ(0) + __ffs(pending);
+			generic_handle_irq(irq);
+			pending &= pending - 1;
+		}
+		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+				balloon3_irq_enabled;
+	} while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+	int irq;
+
+	pxa27x_init_irq();
+	/* setup extra Balloon3 irqs */
+	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+		set_irq_chip(irq, &balloon3_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+	set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+	pr_debug("%s: chained handler installed - irq %d automatically "
+		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
+static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
+	.gpio_base	= BALLOON3_PCF_GPIO_BASE,
+	.n_latch	= 0,
+	.setup		= NULL,
+	.teardown	= NULL,
+	.context	= NULL,
+};
+
+static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("pcf8574a", 0x38),
+		.platform_data	= &balloon3_pcf857x_pdata,
+	},
+};
+
+static void __init balloon3_i2c_init(void)
+{
 	pxa_set_i2c_info(NULL);
-	if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
-		pxa_set_ac97_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
+}
+#else
+static inline void balloon3_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * NAND
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+static uint16_t balloon3_ctl =
+	BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+	BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+	BALLOON3_NAND_CONTROL_FLWP;
+
+static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		if (ctrl & NAND_CLE)
+			balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
+		else
+			balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
+
+		if (ctrl & NAND_ALE)
+			balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
+		else
+			balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
+
+		__raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
 	}
 
-	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
-		gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
-			"LCD Backlight Power");
-		gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
-		set_pxa_fb_info(&balloon3_pxafb_info);
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	if (chip < 0 || chip > 3)
+		return;
+
+	balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
+			BALLOON3_NAND_CONTROL_FLCE1 |
+			BALLOON3_NAND_CONTROL_FLCE2 |
+			BALLOON3_NAND_CONTROL_FLCE3;
+
+	/* Deassert correct nCE line */
+	balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
+
+	__raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+}
+
+static int balloon3_nand_probe(struct platform_device *pdev)
+{
+	void __iomem *temp_map;
+	uint16_t ver;
+	int ret;
+
+	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
+
+	ver = __raw_readw(BALLOON3_FPGA_VER);
+	if (ver > 0x0201)
+		pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+			"NAND support might be broken in this version!", ver);
+
+	/* Power up the NAND chips */
+	ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
+	if (ret)
+		goto err1;
+
+	ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
+	if (ret)
+		goto err2;
+
+	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
+
+	/* Deassert all nCE lines and write protect line */
+	__raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+	return 0;
+
+err2:
+	gpio_free(BALLOON3_GPIO_RUN_NAND);
+err1:
+	return ret;
+}
+
+static void balloon3_nand_remove(struct platform_device *pdev)
+{
+	/* Power down the NAND chips */
+	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
+	gpio_free(BALLOON3_GPIO_RUN_NAND);
+}
+
+static struct mtd_partition balloon3_partition_info[] = {
+	[0] = {
+		.name	= "Boot",
+		.offset	= 0,
+		.size	= SZ_4M,
+	},
+	[1] = {
+		.name	= "RootFS",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data balloon3_nand_pdata = {
+	.chip = {
+		.nr_chips	= 4,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
+		.partitions	= balloon3_partition_info,
+		.chip_delay	= 50,
+		.part_probe_types = balloon3_part_probes,
+	},
+	.ctrl = {
+		.hwcontrol	= 0,
+		.dev_ready	= 0,
+		.select_chip	= balloon3_nand_select_chip,
+		.cmd_ctrl	= balloon3_nand_cmd_ctl,
+		.probe		= balloon3_nand_probe,
+		.remove		= balloon3_nand_remove,
+	},
+};
+
+static struct resource balloon3_nand_resource[] = {
+	[0] = {
+		.start = BALLOON3_NAND_BASE,
+		.end   = BALLOON3_NAND_BASE + 0x4,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device balloon3_nand = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(balloon3_nand_resource),
+	.resource	= balloon3_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &balloon3_nand_pdata,
 	}
+};
 
-	if (balloon3_has(BALLOON3_FEATURE_MMC)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
-		pxa_set_mci_info(&balloon3_mci_platform_data);
+static void __init balloon3_nand_init(void)
+{
+	platform_device_register(&balloon3_nand);
+}
+#else
+static inline void balloon3_nand_init(void) {}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
+	{
+		.supply	= "vcc_core",
 	}
-	pxa_set_ficp_info(&balloon3_ficp_platform_data);
-	if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
-		pxa_set_ohci_info(&balloon3_ohci_platform_data);
+};
+
+static struct regulator_init_data balloon3_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 900000,
+		.max_uV		= 1705000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.consumer_supplies	= balloon3_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(balloon3_max1587a_consumers),
+};
+
+static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
+	{
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &balloon3_max1587a_v3_info,
 	}
-	pxa_set_udc_info(&balloon3_udc_info);
+};
+
+static struct max1586_platform_data balloon3_max1587a_info = {
+	.subdevs     = balloon3_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &balloon3_max1587a_info,
+	},
+};
+
+static void __init balloon3_pmic_init(void)
+{
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
+}
+#else
+static inline void balloon3_pmic_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init balloon3_init(void)
+{
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
 
-	platform_device_register(&balloon3led_device);
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	balloon3_i2c_init();
+	balloon3_irda_init();
+	balloon3_lcd_init();
+	balloon3_leds_init();
+	balloon3_mmc_init();
+	balloon3_nand_init();
+	balloon3_nor_init();
+	balloon3_pmic_init();
+	balloon3_ts_init();
+	balloon3_udc_init();
+	balloon3_uhc_init();
+	balloon3_cf_init();
 }
 
 static struct map_desc balloon3_io_desc[] __initdata = {
@@ -346,9 +808,8 @@ static void __init balloon3_map_io(void)
 
 MACHINE_START(BALLOON3, "Balloon3")
 	/* Maintainer: Nick Bane. */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= balloon3_map_io,
+	.nr_irqs	= BALLOON3_NR_IRQS,
 	.init_irq	= balloon3_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= balloon3_init,
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index aae544631a8b..4bd7a3cda48c 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -148,9 +148,7 @@ static void __init capc7117_init(void)
 
 MACHINE_START(CAPC7117,
 	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
-	.phys_io = 0x40000000,
 	.boot_params = 0xa0000100,
-	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io = pxa_map_io,
 	.init_irq = pxa3xx_init_irq,
 	.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 161fc2d61207..0f3130599770 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -35,7 +35,7 @@ static int cmx2xx_it8152_irq_gpio;
  * This is really ugly and we need a better way of specifying
  * DMA-capable regions of memory.
  */
-void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
+void __init cmx2xx_pci_adjust_zones(unsigned long *zone_size,
 	unsigned long *zhole_size)
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
@@ -46,7 +46,7 @@ void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
 		/*
 		 * Only adjust if > 64M on current system
 		 */
-		if (node || (zone_size[0] <= sz))
+		if (zone_size[0] <= sz)
 			return;
 
 		zone_size[1] = zone_size[0] - sz;
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index bff6e78f033d..ac5598ce9724 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -33,6 +33,9 @@
 extern void cmx255_init(void);
 extern void cmx270_init(void);
 
+/* reserve IRQs for IT8152 */
+#define CMX2XX_NR_IRQS		(IRQ_BOARD_START + 40)
+
 /* virtual addresses for statically mapped regions */
 #define CMX2XX_VIRT_BASE	(0xe8000000)
 #define CMX2XX_IT8152_VIRT	(CMX2XX_VIRT_BASE)
@@ -511,9 +514,8 @@ static void __init cmx2xx_map_io(void)
 
 MACHINE_START(ARMCORE, "Compulab CM-X2XX")
 	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= cmx2xx_map_io,
+	.nr_irqs	= CMX2XX_NR_IRQS,
 	.init_irq	= cmx2xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cmx2xx_init,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index fdda6be6c391..922b1075b9de 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
@@ -50,6 +51,7 @@
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
 #include <mach/audio.h>
+#include <mach/pxa3xx-u2d.h>
 
 #include <asm/mach/map.h>
 
@@ -68,6 +70,8 @@
 #define GPIO97_RTC_RD		(97)
 #define GPIO98_RTC_IO		(98)
 
+#define GPIO_ULPI_PHY_RST	(127)
+
 static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
@@ -472,6 +476,78 @@ static void __init cm_x300_init_mmc(void)
 static inline void cm_x300_init_mmc(void) {}
 #endif
 
+#if defined(CONFIG_PXA310_ULPI)
+static struct clk *pout_clk;
+
+static int cm_x300_ulpi_phy_reset(void)
+{
+	int err;
+
+	/* reset the PHY */
+	err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset");
+	if (err) {
+		pr_err("%s: failed to request ULPI reset GPIO: %d\n",
+		       __func__, err);
+		return err;
+	}
+
+	gpio_direction_output(GPIO_ULPI_PHY_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
+	msleep(10);
+
+	gpio_free(GPIO_ULPI_PHY_RST);
+
+	return 0;
+}
+
+static inline int cm_x300_u2d_init(struct device *dev)
+{
+	int err = 0;
+
+	if (cpu_is_pxa310()) {
+		/* CLK_POUT is connected to the ULPI PHY */
+		pout_clk = clk_get(NULL, "CLK_POUT");
+		if (IS_ERR(pout_clk)) {
+			err = PTR_ERR(pout_clk);
+			pr_err("%s: failed to get CLK_POUT: %d\n",
+			       __func__, err);
+			return err;
+		}
+		clk_enable(pout_clk);
+
+		err = cm_x300_ulpi_phy_reset();
+		if (err) {
+			clk_disable(pout_clk);
+			clk_put(pout_clk);
+		}
+	}
+
+	return err;
+}
+
+static void cm_x300_u2d_exit(struct device *dev)
+{
+	if (cpu_is_pxa310()) {
+		clk_disable(pout_clk);
+		clk_put(pout_clk);
+	}
+}
+
+static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
+	.ulpi_mode	= ULPI_SER_6PIN,
+	.init		= cm_x300_u2d_init,
+	.exit		= cm_x300_u2d_exit,
+};
+
+static void cm_x300_init_u2d(void)
+{
+	pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
+}
+#else
+static inline void cm_x300_init_u2d(void) {}
+#endif
+
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cm_x300_ohci_init(struct device *dev)
 {
@@ -689,6 +765,7 @@ static void __init cm_x300_init_da9030(void)
 {
 	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
 	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+	set_irq_wake(IRQ_WAKEUP0, 1);
 }
 
 static void __init cm_x300_init_wi2wi(void)
@@ -745,13 +822,15 @@ static void __init cm_x300_init(void)
 {
 	cm_x300_init_mfp();
 
-	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
+	if (cpu_is_pxa300())
+		pxa_set_ffuart_info(NULL);
 
 	cm_x300_init_da9030();
 	cm_x300_init_dm9000();
 	cm_x300_init_lcd();
+	cm_x300_init_u2d();
 	cm_x300_init_ohci();
 	cm_x300_init_mmc();
 	cm_x300_init_nand();
@@ -777,9 +856,7 @@ static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
new file mode 100644
index 000000000000..0f3b632c3b14
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
@@ -0,0 +1,111 @@
+/*
+ *  linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+ *
+ *  Support for Toradex PXA270 based Colibri Evaluation Carrier Board
+ *  Daniel Mack <daniel@caiaq.de>
+ *  Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	GPIO119_USBH2_PWR,
+	GPIO120_USBH2_PEN,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_COLIBRI_PXA270_SD_DETECT,
+	.gpio_card_ro		= -1,
+	.detect_delay_ms	= 200,
+};
+
+static void __init colibri_pxa270_mmc_init(void)
+{
+	pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
+}
+#else
+static inline void colibri_pxa270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int colibri_pxa270_ohci_init(struct device *dev)
+{
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+	return 0;
+}
+
+static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	.init		= colibri_pxa270_ohci_init,
+};
+
+static void __init colibri_pxa270_uhc_init(void)
+{
+	pxa_set_ohci_info(&colibri_pxa270_ohci_info);
+}
+#else
+static inline void colibri_pxa270_uhc_init(void) {}
+#endif
+
+void __init colibri_pxa270_evalboard_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	colibri_pxa270_mmc_init();
+	colibri_pxa270_uhc_init();
+}
+
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
new file mode 100644
index 000000000000..37f0f3ed7c61
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -0,0 +1,272 @@
+/*
+ * linux/arch/arm/mach-pxa/income.c
+ *
+ * Support for Income s.r.o. SH-Dmaster PXA270 SBC
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Pavel Revak <palo@bielyvlk.sk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/sysdev.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/pxafb.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define GPIO114_INCOME_ETH_IRQ  (114)
+#define GPIO0_INCOME_SD_DETECT  (0)
+#define GPIO0_INCOME_SD_RO      (1)
+#define GPIO54_INCOME_LED_A     (54)
+#define GPIO55_INCOME_LED_B     (55)
+#define GPIO113_INCOME_TS_IRQ   (113)
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static mfp_cfg_t income_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+	GPIO1_GPIO,	/* SD read-only */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* BFUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* LED */
+	GPIO54_GPIO,	/* LED A */
+	GPIO55_GPIO,	/* LED B */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data income_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
+	.gpio_card_detect	= GPIO0_INCOME_SD_DETECT,
+	.gpio_card_ro		= GPIO0_INCOME_SD_RO,
+	.detect_delay_ms	= 200,
+};
+
+static void __init income_mmc_init(void)
+{
+	pxa_set_mci_info(&income_mci_platform_data);
+}
+#else
+static inline void income_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data income_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init income_uhc_init(void)
+{
+	pxa_set_ohci_info(&income_ohci_info);
+}
+#else
+static inline void income_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led income_gpio_leds[] = {
+	{
+		.name			= "income:green:leda",
+		.default_trigger	= "none",
+		.gpio			= GPIO54_INCOME_LED_A,
+		.active_low		= 1,
+	},
+	{
+		.name			= "income:green:ledb",
+		.default_trigger	= "none",
+		.gpio			= GPIO55_INCOME_LED_B,
+		.active_low		= 1,
+	}
+};
+
+static struct gpio_led_platform_data income_gpio_led_info = {
+	.leds		= income_gpio_leds,
+	.num_leds	= ARRAY_SIZE(income_gpio_leds),
+};
+
+static struct platform_device income_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &income_gpio_led_info,
+	}
+};
+
+static void __init income_led_init(void)
+{
+	platform_device_register(&income_leds);
+}
+#else
+static inline void income_led_init(void) {}
+#endif
+
+/******************************************************************************
+ * I2C
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct i2c_board_info __initdata income_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("ds1340", 0x68),
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4f),
+	},
+};
+
+static void __init income_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
+}
+#else
+static inline void income_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info income_lcd_modes[] = {
+{
+	.pixclock	= 144700,
+	.xres		= 320,
+	.yres		= 240,
+	.bpp		= 32,
+	.depth		= 18,
+
+	.left_margin	= 10,
+	.right_margin	= 10,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 20,
+	.vsync_len	= 2,
+
+	.sync		= FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info income_lcd_screen = {
+	.modes		= income_lcd_modes,
+	.num_modes	= ARRAY_SIZE(income_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init income_lcd_init(void)
+{
+	set_pxa_fb_info(&income_lcd_screen);
+}
+#else
+static inline void income_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM__MODULE)
+static struct platform_pwm_backlight_data income_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 0x3ff,
+	.dft_brightness	= 0x1ff,
+	.pwm_period_ns	= 1000000,
+};
+
+static struct platform_device income_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &income_backlight_data,
+	},
+};
+
+static void __init income_pwm_init(void)
+{
+	platform_device_register(&income_backlight);
+}
+#else
+static inline void income_pwm_init(void) {}
+#endif
+
+void __init colibri_pxa270_income_boardinit(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	income_mmc_init();
+	income_uhc_init();
+	income_led_init();
+	income_i2c_init();
+	income_lcd_init();
+	income_pwm_init();
+}
+
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 061c45316de8..bc045100ec15 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -3,6 +3,7 @@
  *
  *  Support for Toradex PXA270 based Colibri module
  *  Daniel Mack <daniel@caiaq.de>
+ *  Marek Vasut <marek.vasut@gmail.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
@@ -10,49 +11,55 @@
  */
 
 #include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/sysdev.h>
 #include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
+#include <linux/kernel.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/ucb1400.h>
+
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
 
-#include <mach/pxa27x.h>
+#include <mach/audio.h>
 #include <mach/colibri.h>
+#include <mach/pxa27x.h>
 
-#include "generic.h"
 #include "devices.h"
+#include "generic.h"
 
-/*
- * GPIO configuration
- */
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
 static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
+	/* Ethernet */
 	GPIO78_nCS_2,	/* Ethernet CS */
 	GPIO114_GPIO,	/* Ethernet IRQ */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_GPIO,	/* Touchscreen IRQ */
 };
 
-/*
- * NOR flash
- */
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition colibri_partitions[] = {
 	{
 		.name =		"Bootloader",
 		.offset =	0x00000000,
 		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+		.mask_flags =	MTD_WRITEABLE	/* force read-only */
 	}, {
 		.name =		"Kernel",
 		.offset =	0x00040000,
@@ -90,55 +97,116 @@ static struct platform_device colibri_pxa270_flash_device = {
 	.num_resources = 1,
 };
 
-/*
- * DM9000 Ethernet
- */
-#if defined(CONFIG_DM9000)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= COLIBRI_PXA270_ETH_PHYS,
-		.end	= COLIBRI_PXA270_ETH_PHYS + 3,
+static void __init colibri_pxa270_nor_init(void)
+{
+	platform_device_register(&colibri_pxa270_flash_device);
+}
+#else
+static inline void colibri_pxa270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource colibri_pxa270_dm9000_resources[] = {
+	{
+		.start	= PXA_CS2_PHYS,
+		.end	= PXA_CS2_PHYS + 3,
 		.flags	= IORESOURCE_MEM,
 	},
-	[1] = {
-		.start	= COLIBRI_PXA270_ETH_PHYS + 4,
-		.end	= COLIBRI_PXA270_ETH_PHYS + 4 + 500,
+	{
+		.start	= PXA_CS2_PHYS + 4,
+		.end	= PXA_CS2_PHYS + 4 + 500,
 		.flags	= IORESOURCE_MEM,
 	},
-	[2] = {
-		.start	= COLIBRI_PXA270_ETH_IRQ,
-		.end	= COLIBRI_PXA270_ETH_IRQ,
+	{
+		.start	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.end	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
 
-static struct platform_device dm9000_device = {
+static struct platform_device colibri_pxa270_dm9000_device = {
 	.name		= "dm9000",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
+	.num_resources	= ARRAY_SIZE(colibri_pxa270_dm9000_resources),
+	.resource	= colibri_pxa270_dm9000_resources,
 };
-#endif /* CONFIG_DM9000 */
 
-static struct platform_device *colibri_pxa270_devices[] __initdata = {
-	&colibri_pxa270_flash_device,
-#if defined(CONFIG_DM9000)
-	&dm9000_device,
+static void __init colibri_pxa270_eth_init(void)
+{
+	platform_device_register(&colibri_pxa270_dm9000_device);
+}
+#else
+static inline void colibri_pxa270_eth_init(void) {}
 #endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
+	.irq		= gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+};
+
+static struct platform_device colibri_pxa270_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &colibri_pxa270_ucb1400_pdata,
+	},
 };
 
+static void __init colibri_pxa270_tsc_init(void)
+{
+	pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
+	platform_device_register(&colibri_pxa270_ucb1400_device);
+}
+#else
+static inline void colibri_pxa270_tsc_init(void) {}
+#endif
+
+static int colibri_pxa270_baseboard;
+core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
+
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
+
+	colibri_pxa270_nor_init();
+	colibri_pxa270_eth_init();
+	colibri_pxa270_tsc_init();
+
+	switch (colibri_pxa270_baseboard) {
+	case COLIBRI_PXA270_EVALBOARD:
+		colibri_pxa270_evalboard_init();
+		break;
+	case COLIBRI_PXA270_INCOME:
+		colibri_pxa270_income_boardinit();
+		break;
+	default:
+		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
+				colibri_pxa270_baseboard);
+	}
+}
+
+/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
+ * with the INCOME mach type or with COLIBRI and the kernel parameter
+ * "colibri_pxa270_baseboard=1"
+ */
+static void __init colibri_pxa270_income_init(void)
+{
+	colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
+	colibri_pxa270_init();
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa270_init,
 	.map_io		= pxa_map_io,
@@ -146,3 +214,11 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.timer		= &pxa_timer,
 MACHINE_END
 
+MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
+	.boot_params	= 0xa0000100,
+	.init_machine	= colibri_pxa270_income_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 40b6ac2de876..a70b256591e6 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -186,8 +186,6 @@ void __init colibri_pxa300_init(void)
 }
 
 MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa300_init,
 	.map_io		= pxa_map_io,
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ae835fad7d10..ca5f29e2e9cd 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/sizes.h>
@@ -28,6 +29,8 @@
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/audio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/udc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -101,6 +104,42 @@ void __init colibri_pxa320_init_ohci(void)
 static inline void colibri_pxa320_init_ohci(void) {}
 #endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
 
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
+	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
+	.gpio_pullup		= -1,
+};
+
+static struct platform_device colibri_pxa320_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &colibri_pxa320_gpio_vbus_info,
+	},
+};
+
+static void colibri_pxa320_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR = UP2OCR_HXOE;
+}
+
+static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
+	.udc_command		= colibri_pxa320_udc_command,
+	.gpio_pullup		= -1,
+};
+
+static void __init colibri_pxa320_init_udc(void)
+{
+	pxa_set_udc_info(&colibri_pxa320_udc_info);
+	platform_device_register(&colibri_pxa320_gpio_vbus);
+}
+#else
+static inline void colibri_pxa320_init_udc(void) {}
+#endif
+
 static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
 	GPIO22_MMC1_CLK,
 	GPIO23_MMC1_CMD,
@@ -212,11 +251,10 @@ void __init colibri_pxa320_init(void)
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO28));
 	colibri_pxa320_init_uart();
+	colibri_pxa320_init_udc();
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa320_init,
 	.map_io		= pxa_map_io,
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 51ffa6afb675..821229acabe6 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -50,14 +50,13 @@
 #include <mach/udc.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/corgi.h>
-#include <mach/sharpsl.h>
+#include <mach/sharpsl_pm.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
 
 #include "generic.h"
 #include "devices.h"
-#include "sharpsl.h"
 
 static unsigned long corgi_pin_config[] __initdata = {
 	/* Static Memory I/O */
@@ -185,8 +184,6 @@ static struct scoop_pcmcia_config corgi_pcmcia_config = {
 	.num_devs     = 1,
 };
 
-EXPORT_SYMBOL(corgiscoop_device);
-
 static struct w100_mem_info corgi_fb_mem = {
 	.ext_cntl          = 0x00040003,
 	.sdram_mode_reg    = 0x00650021,
@@ -715,7 +712,6 @@ static void __init fixup_corgi(struct machine_desc *desc,
 	sharpsl_save_param();
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	if (machine_is_corgi())
 		mi->bank[0].size = (32*1024*1024);
 	else
@@ -724,8 +720,6 @@ static void __init fixup_corgi(struct machine_desc *desc,
 
 #ifdef CONFIG_MACH_CORGI
 MACHINE_START(CORGI, "SHARP Corgi")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
@@ -736,8 +730,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_SHEPHERD
 MACHINE_START(SHEPHERD, "SHARP Shepherd")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
@@ -748,8 +740,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_HUSKY
 MACHINE_START(HUSKY, "SHARP Husky")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_corgi,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 3f1dc74ac048..29034778bfda 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -23,12 +23,11 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 
-#include <mach/sharpsl.h>
 #include <mach/corgi.h>
 #include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl_pm.h>
 
 #include "generic.h"
-#include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
 #define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
@@ -134,11 +133,11 @@ unsigned long corgipm_read_devdata(int type)
 	case SHARPSL_STATUS_ACIN:
 		return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
 	case SHARPSL_STATUS_LOCK:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
 	case SHARPSL_STATUS_CHRGFULL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
 	case SHARPSL_STATUS_FATAL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
 	case SHARPSL_ACIN_VOLT:
 		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
 	case SHARPSL_BATT_TEMP:
@@ -165,8 +164,6 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.should_wakeup   = corgi_should_wakeup,
 #if defined(CONFIG_LCD_CORGI)
 	.backlight_limit = corgi_lcd_limit_intensity,
-#elif defined(CONFIG_BACKLIGHT_CORGI)
-	.backlight_limit = corgibl_limit_intensity,
 #endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 268a9bc6be8a..58093d9e07be 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -312,8 +312,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	freqs.cpu = policy->cpu;
 
 	if (freq_debug)
-		pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
-			 "(SDRAM %d Mhz)\n",
+		pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
 			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
 			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
 
@@ -398,7 +397,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	return 0;
 }
 
-static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
+static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int i;
 	unsigned int freq;
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 27fa329d9a8b..88fbec05ec50 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -159,7 +159,7 @@ static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
 
 static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
 {
-	return get_clk_frequency_khz(0);
+	return pxa3xx_get_clk_frequency_khz(0);
 }
 
 static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
@@ -204,7 +204,7 @@ static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
 	return 0;
 }
 
-static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
+static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret = -EINVAL;
 
@@ -212,7 +212,8 @@ static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.min_freq = 104000;
 	policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
 	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
-	policy->cur = policy->min = policy->max = get_clk_frequency_khz(0);
+	policy->max = pxa3xx_get_clk_frequency_khz(0);
+	policy->cur = policy->min = policy->max;
 
 	if (cpu_is_pxa300() || cpu_is_pxa310())
 		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 91fd4fea6a54..57cacaff194d 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -272,9 +272,7 @@ static void __init csb726_init(void)
 }
 
 MACHINE_START(CSB726, "Cogent CSB726")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.init_machine   = csb726_init,
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 8e10db148f1b..aaa1166df964 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,12 +4,14 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
+#include <asm/pmu.h>
 #include <mach/udc.h>
+#include <mach/pxa3xx-u2d.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
@@ -31,6 +33,19 @@ void __init pxa_register_device(struct platform_device *dev, void *data)
 		dev_err(&dev->dev, "unable to register device: %d\n", ret);
 }
 
+static struct resource pxa_resource_pmu = {
+	.start	= IRQ_PMU,
+	.end	= IRQ_PMU,
+	.flags	= IORESOURCE_IRQ,
+};
+
+struct platform_device pxa_device_pmu = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.resource	= &pxa_resource_pmu,
+	.num_resources	= 1,
+};
+
 static struct resource pxamci_resources[] = {
 	[0] = {
 		.start	= 0x41100000,
@@ -120,6 +135,33 @@ struct platform_device pxa27x_device_udc = {
 	}
 };
 
+#ifdef CONFIG_PXA3xx
+static struct resource pxa3xx_u2d_resources[] = {
+	[0] = {
+		.start	= 0x54100000,
+		.end	= 0x54100fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_USB2,
+		.end	= IRQ_USB2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa3xx_device_u2d = {
+	.name		= "pxa3xx-u2d",
+	.id		= -1,
+	.resource	= pxa3xx_u2d_resources,
+	.num_resources	= ARRAY_SIZE(pxa3xx_u2d_resources),
+};
+
+void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_u2d, info);
+}
+#endif /* CONFIG_PXA3xx */
+
 static struct resource pxafb_resources[] = {
 	[0] = {
 		.start	= 0x44000000,
@@ -340,6 +382,31 @@ struct platform_device pxa_device_i2s = {
 	.num_resources	= ARRAY_SIZE(pxai2s_resources),
 };
 
+struct platform_device pxa_device_asoc_ssp1 = {
+	.name		= "pxa-ssp-dai",
+	.id		= 0,
+};
+
+struct platform_device pxa_device_asoc_ssp2= {
+	.name		= "pxa-ssp-dai",
+	.id		= 1,
+};
+
+struct platform_device pxa_device_asoc_ssp3 = {
+	.name		= "pxa-ssp-dai",
+	.id		= 2,
+};
+
+struct platform_device pxa_device_asoc_ssp4 = {
+	.name		= "pxa-ssp-dai",
+	.id		= 3,
+};
+
+struct platform_device pxa_device_asoc_platform = {
+	.name		= "pxa-pcm-audio",
+	.id		= -1,
+};
+
 static u64 pxaficp_dmamask = ~(u32)0;
 
 struct platform_device pxa_device_ficp = {
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 93817d99761e..2fd5a8b35757 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,8 +1,10 @@
+extern struct platform_device pxa_device_pmu;
 extern struct platform_device pxa_device_mci;
 extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
 extern struct platform_device pxa25x_device_udc;
 extern struct platform_device pxa27x_device_udc;
+extern struct platform_device pxa3xx_device_u2d;
 extern struct platform_device pxa_device_fb;
 extern struct platform_device pxa_device_ffuart;
 extern struct platform_device pxa_device_btuart;
@@ -37,4 +39,10 @@ extern struct platform_device pxa3xx_device_i2c_power;
 
 extern struct platform_device pxa3xx_device_gcu;
 
+extern struct platform_device pxa_device_asoc_platform;
+extern struct platform_device pxa_device_asoc_ssp1;
+extern struct platform_device pxa_device_asoc_ssp2;
+extern struct platform_device pxa_device_asoc_ssp3;
+extern struct platform_device pxa_device_asoc_ssp4;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
deleted file mode 100644
index 8fde3387279d..000000000000
--- a/arch/arm/mach-pxa/e330.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Hardware definitions for the Toshiba e330 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
-	.enable   = &eseries_tmio_enable,
-	.disable  = &eseries_tmio_disable,
-	.suspend  = &eseries_tmio_suspend,
-	.resume   = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
-	.name           = "tc6387xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e330_tc6387xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e330_tc6387xb_device,
-};
-
-static void __init e330_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E330, "Toshiba e330")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e330_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
deleted file mode 100644
index f50f055f5720..000000000000
--- a/arch/arm/mach-pxa/e350.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Hardware definitions for the Toshiba e350 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
-	.irq_base               = IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e350_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e350_t7l66xb_device,
-};
-
-static void __init e350_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E350, "Toshiba e350")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e350_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
deleted file mode 100644
index 55b950f12844..000000000000
--- a/arch/arm/mach-pxa/e400.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/pxafb.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
-	.name = "Internal NAND flash",
-	.offset =  0,
-	.size =  MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
-	.num_partitions = 1,
-	.partition = &partition_a,
-	.badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-
-	.nand_data              = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e400_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e400_t7l66xb_device,
-};
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	/* Fixme - e400 may have a switched clock */
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	set_pxa_fb_info(&e400_pxafb_mach_info);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
deleted file mode 100644
index d578021d1a10..000000000000
--- a/arch/arm/mach-pxa/e740.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/clk.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-#include "devices.h"
-
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-	GPIO40_GPIO,  /* Mic amp power */
-	GPIO41_GPIO,  /* Headphone amp power */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e740_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e740_fb_device,
-	&e740_t7l66xb_device,
-};
-
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
-			"UDCCLK", &pxa25x_device_udc.dev),
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
deleted file mode 100644
index af83caa52dd4..000000000000
--- a/arch/arm/mach-pxa/e750.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x00000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00fff003,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 21,
-	.right_margin    = 22,
-	.upper_margin    = 5,
-	.lower_margin    = 4,
-	.crtc_ss         = 0x80150014,
-	.crtc_ls         = 0x8014000d,
-	.crtc_gs         = 0xc1000005,
-	.crtc_vpos_gs    = 0x00020147,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa1700030,
-	.crtc_gclk       = 0x80cc0015,
-	.crtc_goe        = 0x80cc0015,
-	.crtc_ps1_active = 0x61060017,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-	.init_data1 = 0x01192f1b,
-	.gpio_dir1  = 0xd5ffdeff,
-	.gpio_oe1   = 0x000020bf,
-	.init_data2 = 0x010f010f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-	.modelist   = &e750_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e750_lcd_regs,
-	.gpio       = &e750_w100_gpio_info,
-	.xtal_freq  = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e750_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e750_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e750_fb_resources),
-	.resource       = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO11_3_6MHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO4_GPIO,  /* Headphone amp power */
-	GPIO7_GPIO,  /* Speaker amp power */
-	GPIO37_GPIO, /* Headphone detect */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e750_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e750_fb_device,
-	&e750_tc6393xb_device,
-};
-
-static void __init e750_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e750_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
deleted file mode 100644
index 8ea97bf53fe1..000000000000
--- a/arch/arm/mach-pxa/e800.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x02a00000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x000ff2a3,
-	.genlcd_cntl2 =          0x000002a3,
-	.genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-	[0] = {
-		.xres            = 480,
-		.yres            = 640,
-		.left_margin     = 52,
-		.right_margin    = 148,
-		.upper_margin    = 2,
-		.lower_margin    = 6,
-		.crtc_ss         = 0x80350034,
-		.crtc_ls         = 0x802b0026,
-		.crtc_gs         = 0x80160016,
-		.crtc_vpos_gs    = 0x00020003,
-		.crtc_rev        = 0x0040001d,
-		.crtc_dclk       = 0xe0000000,
-		.crtc_gclk       = 0x82a50049,
-		.crtc_goe        = 0x80ee001c,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 128,
-		.pixclk_divider         = 4,
-		.pixclk_divider_rotated = 6,
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	},
-	[1] = {
-		.xres            = 240,
-		.yres            = 320,
-		.left_margin     = 15,
-		.right_margin    = 88,
-		.upper_margin    = 0,
-		.lower_margin    = 7,
-		.crtc_ss         = 0xd010000f,
-		.crtc_ls         = 0x80070003,
-		.crtc_gs         = 0x80000000,
-		.crtc_vpos_gs    = 0x01460147,
-		.crtc_rev        = 0x00400003,
-		.crtc_dclk       = 0xa1700030,
-		.crtc_gclk       = 0x814b0008,
-		.crtc_goe        = 0x80cc0015,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
-		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	}
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-	.init_data1 = 0xc13fc019,
-	.gpio_dir1  = 0x3e40df7f,
-	.gpio_oe1   = 0x003c3000,
-	.init_data2 = 0x00000000,
-	.gpio_dir2  = 0x00000000,
-	.gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x10001545,
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-	unsigned long tmp;
-
-	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-	if (par->mode->xres == 480)
-		tmp |= 0x100;
-	else
-		tmp &= ~0x100;
-	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-	.change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-	.modelist   = e800_lcd_mode,
-	.num_modes  = 2,
-	.regs       = &e800_lcd_regs,
-	.gpio       = &e800_w100_gpio_info,
-	.mem        = &e800_w100_mem_info,
-	.tg         = &e800_tg_info,
-	.xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e800_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e800_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e800_fb_resources),
-	.resource       = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
-	.gpio_vbus   = GPIO_E800_USB_DISC,
-	.gpio_pullup = GPIO_E800_USB_PULLUP,
-	.gpio_pullup_inverted = 1
-};
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e800_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&e800_fb_device,
-	&e800_tc6393xb_device,
-};
-
-static void __init e800_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_udc_info(&e800_udc_mach_info);
-	pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa25x_init_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e800_init,
-	.timer		= &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 0517c17978f3..ed0dbfdb22ed 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -43,7 +43,7 @@
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <plat/i2c.h>
 #include <mach/camera.h>
 #include <mach/pxa2xx_spi.h>
@@ -1015,7 +1015,6 @@ static struct soc_camera_link iclink = {
 	.power		= em_x270_sensor_power,
 	.board_info	= &em_x270_i2c_cam_info[0],
 	.i2c_adapter_id	= 0,
-	.module_name	= "mt9m111",
 };
 
 static struct platform_device em_x270_camera = {
@@ -1301,8 +1300,6 @@ static void __init em_x270_init(void)
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
@@ -1311,8 +1308,6 @@ MACHINE_END
 
 MACHINE_START(EXEDA, "Compulab eXeda")
 	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 96ed13081639..b25690ccadc4 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -15,6 +15,13 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/tc6387xb.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/t7l66xb.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <video/w100fb.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
@@ -22,9 +29,13 @@
 
 #include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
+#include <mach/eseries-irq.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
 #include <mach/udc.h>
 #include <mach/irda.h>
 
+#include "devices.h"
 #include "generic.h"
 #include "clock.h"
 
@@ -34,7 +45,6 @@ void __init eseries_fixup(struct machine_desc *desc,
 {
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	if (machine_is_e800())
 		mi->bank[0].size = (128*1024*1024);
 	else
@@ -131,3 +141,796 @@ void eseries_register_clks(void)
 	clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
 }
 
+#ifdef CONFIG_MACH_E330
+/* -------------------- e330 tc6387xb parameters -------------------- */
+
+static struct tc6387xb_platform_data e330_tc6387xb_info = {
+	.enable   = &eseries_tmio_enable,
+	.disable  = &eseries_tmio_disable,
+	.suspend  = &eseries_tmio_suspend,
+	.resume   = &eseries_tmio_resume,
+};
+
+static struct platform_device e330_tc6387xb_device = {
+	.name           = "tc6387xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e330_tc6387xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* --------------------------------------------------------------- */
+
+static struct platform_device *e330_devices[] __initdata = {
+	&e330_tc6387xb_device,
+};
+
+static void __init e330_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E330, "Toshiba e330")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e330_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E350
+/* -------------------- e350 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e350_t7l66xb_info = {
+	.irq_base               = IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e350_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e350_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e350_devices[] __initdata = {
+	&e350_t7l66xb_device,
+};
+
+static void __init e350_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e350_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static struct mtd_partition partition_a = {
+	.name = "Internal NAND flash",
+	.offset =  0,
+	.size =  MTDPART_SIZ_FULL,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
+	.options = 0,
+	.offs = 4,
+	.len = 2,
+	.pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data e400_t7l66xb_nand_config = {
+	.num_partitions = 1,
+	.partition = &partition_a,
+	.badblock_pattern = &e400_t7l66xb_nand_bbt,
+};
+
+static struct t7l66xb_platform_data e400_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+
+	.nand_data              = &e400_t7l66xb_nand_config,
+};
+
+static struct platform_device e400_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e400_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e400_devices[] __initdata = {
+	&e400_t7l66xb_device,
+};
+
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	/* Fixme - e400 may have a switched clock */
+	eseries_register_clks();
+	eseries_get_tmio_gpios();
+	set_pxa_fb_info(&e400_pxafb_mach_info);
+	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E400, "Toshiba e400")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* Audio power control */
+	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
+	GPIO40_GPIO,  /* Mic amp power */
+	GPIO41_GPIO,  /* Headphone amp power */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* -------------------- e740 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e740_t7l66xb_info = {
+	.irq_base 		= IRQ_BOARD_START,
+	.enable                 = &eseries_tmio_enable,
+	.suspend                = &eseries_tmio_suspend,
+	.resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e740_t7l66xb_device = {
+	.name           = "t7l66xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e740_t7l66xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e740_devices[] __initdata = {
+	&e740_fb_device,
+	&e740_t7l66xb_device,
+};
+
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	eseries_register_clks();
+	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
+			"UDCCLK", &pxa25x_device_udc.dev),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+/* -------------------- e750 MFP parameters -------------------- */
+
+static unsigned long e750_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO11_3_6MHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+
+	/* TMIO controller */
+	GPIO19_GPIO, /* t7l66xb #PCLR */
+	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+	/* UDC */
+	GPIO13_GPIO,
+	GPIO3_GPIO,
+
+	/* IrDA */
+	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* Audio power control */
+	GPIO4_GPIO,  /* Headphone amp power */
+	GPIO7_GPIO,  /* Speaker amp power */
+	GPIO37_GPIO, /* Headphone detect */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------- e750 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e750_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e750_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e750_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ------------------------------------------------------------- */
+
+static struct platform_device *e750_devices[] __initdata = {
+	&e750_fb_device,
+	&e750_tc6393xb_device,
+};
+
+static void __init e750_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E750, "Toshiba e750")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e750_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static unsigned long e800_pin_config[] __initdata = {
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+};
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
+		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+/* ----------------- e800 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e800_tc6393xb_info = {
+	.irq_base       = IRQ_BOARD_START,
+	.scr_pll2cr     = 0x0cc1,
+	.scr_gper       = 0,
+	.gpio_base      = -1,
+	.suspend        = &eseries_tmio_suspend,
+	.resume         = &eseries_tmio_resume,
+	.enable         = &eseries_tmio_enable,
+	.disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e800_tc6393xb_device = {
+	.name           = "tc6393xb",
+	.id             = -1,
+	.dev            = {
+		.platform_data = &e800_tc6393xb_info,
+	},
+	.num_resources = 2,
+	.resource      = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e800_devices[] __initdata = {
+	&e800_fb_device,
+	&e800_tc6393xb_device,
+};
+
+static void __init e800_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
+			"GPIO11_CLK", NULL),
+	eseries_get_tmio_gpios();
+	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
+	pxa_set_udc_info(&e800_udc_mach_info);
+	pxa_set_ac97_info(NULL);
+}
+
+MACHINE_START(E800, "Toshiba e800")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.nr_irqs	= ESERIES_NR_IRQS,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e800_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 626c82b13970..142c711f4cda 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -32,12 +32,14 @@
 #include <mach/ohci.h>
 #include <plat/i2c.h>
 #include <mach/hardware.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/camera.h>
 
 #include "devices.h"
 #include "generic.h"
 
+#define EZX_NR_IRQS			(IRQ_BOARD_START + 24)
+
 #define GPIO12_A780_FLIP_LID 		12
 #define GPIO15_A1200_FLIP_LID 		15
 #define GPIO15_A910_FLIP_LID 		15
@@ -753,7 +755,6 @@ static struct soc_camera_link a780_iclink = {
 	.flags          = SOCAM_SENSOR_INVERT_PCLK,
 	.i2c_adapter_id = 0,
 	.board_info     = &a780_camera_i2c_board_info,
-	.module_name    = "mt9m111",
 	.power          = a780_camera_power,
 	.reset          = a780_camera_reset,
 };
@@ -796,10 +797,9 @@ static void __init a780_init(void)
 }
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a780_init,
@@ -862,10 +862,9 @@ static void __init e680_init(void)
 }
 
 MACHINE_START(EZX_E680, "Motorola EZX E680")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e680_init,
@@ -928,10 +927,9 @@ static void __init a1200_init(void)
 }
 
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a1200_init,
@@ -1025,7 +1023,6 @@ static struct soc_camera_link a910_iclink = {
 	.bus_id         = 0,
 	.i2c_adapter_id = 0,
 	.board_info     = &a910_camera_i2c_board_info,
-	.module_name    = "mt9m111",
 	.power          = a910_camera_power,
 	.reset          = a910_camera_reset,
 };
@@ -1120,10 +1117,9 @@ static void __init a910_init(void)
 }
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a910_init,
@@ -1186,10 +1182,9 @@ static void __init e6_init(void)
 }
 
 MACHINE_START(EZX_E6, "Motorola EZX E6")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e6_init,
@@ -1226,10 +1221,9 @@ static void __init e2_init(void)
 }
 
 MACHINE_START(EZX_E2, "Motorola EZX E2")
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e2_init,
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index baabb3ce088e..6451e9c3a93f 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -66,8 +66,7 @@ unsigned int get_clk_frequency_khz(int info)
 		return pxa25x_get_clk_frequency_khz(info);
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_clk_frequency_khz(info);
-	else
-		return pxa3xx_get_clk_frequency_khz(info);
+	return 0;
 }
 EXPORT_SYMBOL(get_clk_frequency_khz);
 
@@ -80,8 +79,7 @@ unsigned int get_memclk_frequency_10khz(void)
 		return pxa25x_get_memclk_frequency_10khz();
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_memclk_frequency_10khz();
-	else
-		return pxa3xx_get_memclk_frequency_10khz();
+	return 0;
 }
 EXPORT_SYMBOL(get_memclk_frequency_10khz);
 
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 890fb90a672f..4b1ad2769ed7 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -26,8 +26,7 @@ extern unsigned int get_clk_frequency_khz(int info);
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
-	mi->bank[__nr].size = (__size), \
-	mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
+	mi->bank[__nr].size = (__size)
 
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
@@ -55,11 +54,9 @@ static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
 
 #ifdef CONFIG_PXA3xx
 extern unsigned pxa3xx_get_clk_frequency_khz(int);
-extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
 extern void pxa3xx_clear_reset_status(unsigned int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
-#define pxa3xx_get_memclk_frequency_10khz()	(0)
 static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 #endif
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 96c345129135..1e2a9a13aec1 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -224,9 +224,7 @@ static void __init gumstix_init(void)
 }
 
 MACHINE_START(GUMSTIX, "Gumstix")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100, /* match u-boot bi_boot_params */
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index c1cab0871c99..7057a1f46db4 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -201,8 +201,6 @@ static void __init h5000_init(void)
 }
 
 MACHINE_START(H5400, "HP iPAQ H5000")
-	.phys_io = 0x40000000,
-	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params = 0xa0000100,
 	.map_io = pxa_map_io,
 	.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index f9a2e4b0f090..01b7f07ebad2 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -159,8 +159,6 @@ static void __init himalaya_init(void)
 
 
 MACHINE_START(HIMALAYA, "HTC Himalaya")
-	.phys_io = 0x40000000,
-	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params = 0xa0000100,
 	.map_io = pxa_map_io,
 	.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 848c861dd23f..76d93a25bab6 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -870,10 +870,9 @@ static void __init hx4700_init(void)
 }
 
 MACHINE_START(H4700, "HP iPAQ HX4700")
-	.phys_io      = 0x40000000,
-	.io_pg_offst  = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params  = 0xa0000100,
 	.map_io       = pxa_map_io,
+	.nr_irqs      = HX4700_NR_IRQS,
 	.init_irq     = pxa27x_init_irq,
 	.init_machine = hx4700_init,
 	.timer        = &pxa_timer,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 5ccb0ceff6c4..d51ee3d25e70 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -191,9 +191,7 @@ static void __init icontrol_init(void)
 }
 
 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index bc78c4dc0c66..e773dceeabc6 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -194,8 +194,6 @@ static void __init idp_map_io(void)
 
 MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 	/* Maintainer: Vibren Technologies */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= idp_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
deleted file mode 100644
index 5161dca8ccc0..000000000000
--- a/arch/arm/mach-pxa/imote2.c
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/imote2.c
- *
- * Author:	Ed C. Epp
- * Created:	Nov 05, 2002
- * Copyright:	Intel Corp.
- *
- * Modified 2008:  Jonathan Cameron
- *
- * The Imote2 is a wireless sensor node platform sold
- * by Crossbow (www.xbow.com).
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/mfd/da903x.h>
-#include <linux/sht15.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <mach/pxa27x.h>
-#include <plat/i2c.h>
-#include <mach/udc.h>
-#include <mach/mmc.h>
-#include <mach/pxa2xx_spi.h>
-#include <mach/pxa27x-udc.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long imote2_pin_config[] __initdata = {
-
-	/* Device Identification for wakeup*/
-	GPIO102_GPIO,
-
-	/* Button */
-	GPIO91_GPIO,
-
-	/* DA9030 */
-	GPIO1_GPIO,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* 802.15.4 radio - driver out of mainline */
-	GPIO22_GPIO,			/* CC_RSTN */
-	GPIO114_GPIO,			/* CC_FIFO */
-	GPIO116_GPIO,			/* CC_CCA */
-	GPIO0_GPIO,			/* CC_FIFOP */
-	GPIO16_GPIO,			/* CCSFD */
-	GPIO115_GPIO,			/* Power enable */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO,			/* Chip Select */
-	GPIO34_SSP3_SCLK,
-	GPIO35_SSP3_TXD,
-	GPIO41_SSP3_RXD,
-
-	/* SSP 2 - to daughter boards */
-	GPIO37_GPIO,			/* Chip Select */
-	GPIO36_SSP2_SCLK,
-	GPIO38_SSP2_TXD,
-	GPIO11_SSP2_RXD,
-
-	/* SSP 1 - to daughter boards */
-	GPIO24_GPIO,			/* Chip Select */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* BTUART Basic Connector*/
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART Serial console via debug board*/
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* Basic sensor board */
-	GPIO96_GPIO,	/* accelerometer interrupt */
-	GPIO99_GPIO,	/* ADC interrupt */
-
-	/* SHT15 */
-	GPIO100_GPIO,
-	GPIO98_GPIO,
-
-	/* Connector pins specified as gpios */
-	GPIO94_GPIO, /* large basic connector pin 14 */
-	GPIO10_GPIO, /* large basic connector pin 23 */
-
-	/* LEDS */
-	GPIO103_GPIO, /* red led */
-	GPIO104_GPIO, /* green led */
-	GPIO105_GPIO, /* blue led */
-};
-
-static struct sht15_platform_data platform_data_sht15 = {
-	.gpio_data =  100,
-	.gpio_sck  =  98,
-};
-
-static struct platform_device sht15 = {
-	.name = "sht15",
-	.id = -1,
-	.dev = {
-		.platform_data = &platform_data_sht15,
-	},
-};
-
-static struct regulator_consumer_supply imote2_sensor_3_con[] = {
-	{
-		.dev = &sht15.dev,
-		.supply = "vcc",
-	},
-};
-
-static struct gpio_led imote2_led_pins[] = {
-	{
-		.name       =  "imote2:red",
-		.gpio       = 103,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:green",
-		.gpio       = 104,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:blue",
-		.gpio       = 105,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data imote2_led_data = {
-	.num_leds = ARRAY_SIZE(imote2_led_pins),
-	.leds     = imote2_led_pins,
-};
-
-static struct platform_device imote2_leds = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev = {
-		.platform_data = &imote2_led_data,
-	},
-};
-
-/* Reverse engineered partly from Platformx drivers */
-enum imote2_ldos{
-	vcc_vref,
-	vcc_cc2420,
-	vcc_mica,
-	vcc_bt,
-	/* The two voltages available to sensor boards */
-	vcc_sensor_1_8,
-	vcc_sensor_3,
-
-	vcc_sram_ext, /* directly connected to the pxa271 */
-	vcc_pxa_pll,
-	vcc_pxa_usim, /* Reference voltage for certain gpios */
-	vcc_pxa_mem,
-	vcc_pxa_flash,
-	vcc_pxa_core, /*Dc-Dc buck not yet supported */
-	vcc_lcd,
-	vcc_bb,
-	vcc_bbio,
-	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
-};
-
-/* The values of the various regulator constraints are obviously dependent
- * on exactly what is wired to each ldo.  Unfortunately this information is
- * not generally available.  More information has been requested from Xbow
- * but as of yet they haven't been forthcoming.
- *
- * Some of these are clearly Stargate 2 related (no way of plugging
- * in an lcd on the IM2 for example!).
- */
-static struct regulator_init_data imote2_ldo_init_data[] = {
-	[vcc_bbio] = {
-		.constraints = { /* board default 1.8V */
-			.name = "vcc_bbio",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_bb] = {
-		.constraints = { /* board default 2.8V */
-			.name = "vcc_bb",
-			.min_uV = 2700000,
-			.max_uV = 3000000,
-		},
-	},
-	[vcc_pxa_flash] = {
-		.constraints = {/* default is 1.8V */
-			.name = "vcc_pxa_flash",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_cc2420] = { /* also vcc_io */
-		.constraints = {
-			/* board default is 2.8V */
-			.name = "vcc_cc2420",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_vref] = { /* Reference for what? */
-		.constraints = { /* default 1.8V */
-			.name = "vcc_vref",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sram_ext] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_sram_ext",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_mica] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_mica",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_bt] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_bt",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_lcd] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_lcd",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_io] = { /* Same or higher than everything
-			  * bar vccbat and vccusb */
-		.constraints = { /* default 2.8V */
-			.name = "vcc_io",
-			.min_uV = 2692000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_sensor_1_8] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_sensor_1_8",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sensor_3] = { /* curiously default 2.8V */
-		.constraints = {
-			.name = "vcc_sensor_3",
-			.min_uV = 2800000,
-			.max_uV = 3000000,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(imote2_sensor_3_con),
-		.consumer_supplies = imote2_sensor_3_con,
-	},
-	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
-		.constraints = {
-			.name = "vcc_pxa_pll",
-			.min_uV = 1170000,
-			.max_uV = 1430000,
-		},
-	},
-	[vcc_pxa_usim] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_usim",
-			.min_uV = 1710000,
-			.max_uV = 2160000,
-		},
-	},
-	[vcc_pxa_mem] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_mem",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-};
-
-static struct da903x_subdev_info imote2_da9030_subdevs[] = {
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO2,
-		.platform_data = &imote2_ldo_init_data[vcc_bbio],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &imote2_ldo_init_data[vcc_bb],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO4,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_flash],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &imote2_ldo_init_data[vcc_cc2420],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO6,
-		.platform_data = &imote2_ldo_init_data[vcc_vref],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO7,
-		.platform_data = &imote2_ldo_init_data[vcc_sram_ext],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO8,
-		.platform_data = &imote2_ldo_init_data[vcc_mica],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO9,
-		.platform_data = &imote2_ldo_init_data[vcc_bt],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &imote2_ldo_init_data[vcc_sensor_1_8],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO11,
-		.platform_data = &imote2_ldo_init_data[vcc_sensor_3],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &imote2_ldo_init_data[vcc_lcd],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO15,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_pll],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO17,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_usim],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO18,
-		.platform_data = &imote2_ldo_init_data[vcc_io],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &imote2_ldo_init_data[vcc_pxa_mem],
-	},
-};
-
-static struct da903x_platform_data imote2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
-	.subdevs = imote2_da9030_subdevs,
-};
-
-/* As the the imote2 doesn't currently have a conventional SD slot
- * there is no option to hotplug cards, making all this rather simple
- */
-static int imote2_mci_get_ro(struct device *dev)
-{
-	return 0;
-}
-
-/* Rather simple case as hotplugging not possible */
-static struct pxamci_platform_data imote2_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
-	.get_ro = imote2_mci_get_ro,
-	.gpio_card_detect = -1,
-	.gpio_card_ro	= -1,
-	.gpio_power = -1,
-};
-
-static struct mtd_partition imote2flash_partitions[] = {
-	{
-		.name = "Bootloader",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE,
-	}, {
-		.name = "Kernel",
-		.size = 0x00200000,
-		.offset = 0x00040000,
-		.mask_flags = 0,
-	}, {
-		.name = "Filesystem",
-		.size = 0x01DC0000,
-		.offset = 0x00240000,
-		.mask_flags = 0,
-	},
-};
-
-static struct resource flash_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data imote2_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = imote2flash_partitions,
-	.nr_parts = ARRAY_SIZE(imote2flash_partitions),
-	.name = "PXA27xOnChipROM",
-	.width = 2,
-};
-
-static struct platform_device imote2_flash_device = {
-	.name = "pxa2xx-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &imote2_flash_data,
-	},
-	.resource = &flash_resources,
-	.num_resources = 1,
-};
-
-/* Some of the drivers here are out of kernel at the moment (parts of IIO)
- * and it may be a while before they are in the mainline.
- */
-static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
-	{ /* UCAM sensor board */
-		.type = "max1239",
-		.addr = 0x35,
-	}, { /* ITS400 Sensor board only */
-		.type = "max1363",
-		.addr = 0x34,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = IRQ_GPIO(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tsl2561",
-		.addr = 0x49,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = IRQ_GPIO(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tmp175",
-		.addr = 0x4A,
-		.irq = IRQ_GPIO(96),
-	}, { /* IMB400 Multimedia board */
-		.type = "wm8940",
-		.addr = 0x1A,
-	},
-};
-
-static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &imote2_da9030_pdata,
-		.irq = gpio_to_irq(1),
-	},
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_chip staccel_chip_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{ /* Driver in IIO */
-		.modalias = "lis3l02dq",
-		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
-		.bus_num = 1,
-		.chip_select = 0,
-		.controller_data = &staccel_chip_info,
-		.irq = IRQ_GPIO(96),
-	}, { /* Driver out of kernel as it needs considerable rewriting */
-		.modalias = "cc2420",
-		.max_speed_hz = 6500000,
-		.bus_num = 3,
-		.chip_select = 0,
-		.controller_data = &cc2420_info,
-	},
-};
-
-static void im2_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |=  UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
-		break;
-	}
-}
-
-static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
-	.udc_command		= im2_udc_command,
-};
-
-static struct platform_device *imote2_devices[] = {
-	&imote2_flash_device,
-	&imote2_leds,
-	&sht15,
-};
-
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
-	.fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static void __init imote2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
-	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	i2c_register_board_info(0, imote2_i2c_board_info,
-				ARRAY_SIZE(imote2_i2c_board_info));
-	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
-				ARRAY_SIZE(imote2_pwr_i2c_board_info));
-
-	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
-	pxa_set_i2c_info(&i2c_pdata);
-
-	pxa_set_mci_info(&imote2_mci_platform_data);
-	pxa_set_udc_info(&imote2_udc_info);
-}
-
-MACHINE_START(INTELMOTE2, "IMOTE 2")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa27x_init_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= imote2_init,
-	.boot_params	= 0xA0000100,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 1a741065045f..561562b4360b 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -26,21 +26,55 @@ enum balloon3_features {
 #define BALLOON3_FPGA_VIRT	(0xf1000000)	/* as per balloon2 */
 #define BALLOON3_FPGA_LENGTH	0x01000000
 
-/* FPGA/CPLD registers */
-#define BALLOON3_PCMCIA0_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-/* fixme - same for now */
-#define BALLOON3_PCMCIA1_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-#define BALLOON3_NANDIO_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
+/* FPGA / CPLD registers for CF socket */
+#define	BALLOON3_CF_STATUS_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+#define	BALLOON3_CF_CONTROL_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+/* FPGA / CPLD version register */
+#define	BALLOON3_FPGA_VER		(BALLOON3_FPGA_VIRT + 0x00e0001c)
+/* FPGA / CPLD registers for NAND flash */
+#define	BALLOON3_NAND_BASE		(PXA_CS4_PHYS + 0x00e00000)
+#define	BALLOON3_NAND_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
+#define	BALLOON3_NAND_CONTROL2_REG	(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define	BALLOON3_NAND_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e00014)
+
 /* fpga/cpld interrupt control register */
 #define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_NANDIO_CTL2_REG 	(BALLOON3_FPGA_VIRT + 0x00e00010)
-#define BALLOON3_NANDIO_CTL_REG 	(BALLOON3_FPGA_VIRT + 0x00e00014)
 #define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
 
 #define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
 #define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
 #define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
 
+/* CF Status Register bits (read-only) bits */
+#define BALLOON3_CF_nIRQ		(1 << 0)
+#define BALLOON3_CF_nSTSCHG_BVD1	(1 << 1)
+
+/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
+#define BALLOON3_CF_RESET		(1 << 0)
+#define BALLOON3_CF_ENABLE		(1 << 1)
+#define BALLOON3_CF_ADD_ENABLE		(1 << 2)
+
+/* CF Interrupt sources */
+#define BALLOON3_BP_CF_NRDY_IRQ		BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ		BALLOON3_IRQ(1)
+
+/* NAND Control register */
+#define	BALLOON3_NAND_CONTROL_FLWP	(1 << 7)
+#define	BALLOON3_NAND_CONTROL_FLSE	(1 << 6)
+#define	BALLOON3_NAND_CONTROL_FLCE3	(1 << 5)
+#define	BALLOON3_NAND_CONTROL_FLCE2	(1 << 4)
+#define	BALLOON3_NAND_CONTROL_FLCE1	(1 << 3)
+#define	BALLOON3_NAND_CONTROL_FLCE0	(1 << 2)
+#define	BALLOON3_NAND_CONTROL_FLALE	(1 << 1)
+#define	BALLOON3_NAND_CONTROL_FLCLE	(1 << 0)
+
+/* NAND Status register */
+#define	BALLOON3_NAND_STAT_RNB		(1 << 0)
+
+/* NAND Control2 register */
+#define	BALLOON3_NAND_CONTROL2_16BIT	(1 << 0)
+
 /* GPIOs for irqs */
 #define BALLOON3_GPIO_AUX_NIRQ		(94)
 #define BALLOON3_GPIO_CODEC_IRQ		(95)
@@ -54,20 +88,24 @@ enum balloon3_features {
 
 #define BALLOON3_GPIO_S0_CD		(105)
 
+/* NAND */
+#define BALLOON3_GPIO_RUN_NAND		(102)
+
+/* PCF8574A Leds */
+#define	BALLOON3_PCF_GPIO_BASE		160
+#define	BALLOON3_PCF_GPIO_LED0		(BALLOON3_PCF_GPIO_BASE + 0)
+#define	BALLOON3_PCF_GPIO_LED1		(BALLOON3_PCF_GPIO_BASE + 1)
+#define	BALLOON3_PCF_GPIO_LED2		(BALLOON3_PCF_GPIO_BASE + 2)
+#define	BALLOON3_PCF_GPIO_LED3		(BALLOON3_PCF_GPIO_BASE + 3)
+#define	BALLOON3_PCF_GPIO_LED4		(BALLOON3_PCF_GPIO_BASE + 4)
+#define	BALLOON3_PCF_GPIO_LED5		(BALLOON3_PCF_GPIO_BASE + 5)
+#define	BALLOON3_PCF_GPIO_LED6		(BALLOON3_PCF_GPIO_BASE + 6)
+#define	BALLOON3_PCF_GPIO_LED7		(BALLOON3_PCF_GPIO_BASE + 7)
+
 /* FPGA Interrupt Mask/Acknowledge Register */
 #define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
 #define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
 
-/* CF Status Register */
-#define BALLOON3_PCMCIA_nIRQ		(1 << 0)  /* IRQ / ready signal */
-#define BALLOON3_PCMCIA_nSTSCHG_BVD1	(1 << 1)
-					/* VDD sense / card status changed */
-
-/* CF control register (write) */
-#define BALLOON3_PCMCIA_RESET		(1 << 0)   /* Card reset signal */
-#define BALLOON3_PCMCIA_ENABLE		(1 << 1)
-#define BALLOON3_PCMCIA_ADD_ENABLE	(1 << 2)
-
 /* CPLD (and FPGA) interface definitions */
 #define CPLD_LCD0_DATA_SET             0x00
 #define CPLD_LCD0_DATA_CLR             0x10
@@ -132,13 +170,12 @@ enum balloon3_features {
 /* Balloon3 Interrupts */
 #define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
 
-#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
-
 #define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
 #define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
 #define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
 
+#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 4)
+
 extern int balloon3_has(enum balloon3_features feature);
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 5f2ba8d9015c..58dada11054f 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -5,6 +5,27 @@
 #include <mach/mfp.h>
 
 /*
+ * base board glue for PXA270 module
+ */
+
+enum {
+	COLIBRI_PXA270_EVALBOARD = 0,
+	COLIBRI_PXA270_INCOME,
+};
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
+extern void colibri_pxa270_evalboard_init(void);
+#else
+static inline void colibri_pxa270_evalboard_init(void) {}
+#endif
+
+#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
+extern void colibri_pxa270_income_boardinit(void);
+#else
+static inline void colibri_pxa270_income_boardinit(void) {}
+#endif
+
+/*
  * common settings for all modules
  */
 
@@ -33,13 +54,10 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
-/* definitions for Colibri PXA270 */
-
-#define COLIBRI_PXA270_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define COLIBRI_PXA270_ETH_PHYS		(PXA_CS2_PHYS)  /* Ethernet */
-#define COLIBRI_PXA270_ETH_IRQ_GPIO	114
-#define COLIBRI_PXA270_ETH_IRQ		\
-	gpio_to_irq(mfp_to_gpio(COLIBRI_PXA270_ETH_IRQ_GPIO))
+/* GPIO definitions for Colibri PXA270 */
+#define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
+#define GPIO0_COLIBRI_PXA270_SD_DETECT	0
+#define GPIO113_COLIBRI_PXA270_TS_IRQ	113
 
 #endif /* _COLIBRI_H_ */
 
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 585970ef08ce..0011055bc3f9 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -109,10 +109,5 @@
 #define CORGI_GPIO_BACKLIGHT_CONT	(CORGI_SCOOP_GPIO_BASE + 7)
 #define CORGI_GPIO_MIC_BIAS		(CORGI_SCOOP_GPIO_BASE + 8)
 
-/*
- * Shared data structures
- */
-extern struct platform_device corgiscoop_device;
-
 #endif /* __ASM_ARCH_CORGI_H  */
 
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 01cf81393fe2..7d5c75125d65 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,12 +13,10 @@
 
 #include "hardware.h"
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x40000000		@ physical
-		movne	\rx, #io_p2v(0x40000000)	@ virtual
-		orr	\rx, \rx, #0x00100000
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00100000
+		orr	\rv, \rp, #io_p2v(0x40000000)	@ virtual
+		orr	\rp, \rp, #0x40000000		@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
index f2a93d5e31d3..de292b269c63 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-irq.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h
@@ -25,3 +25,4 @@
 #define TMIO_SD_IRQ     IRQ_TMIO(1)
 #define TMIO_USB_IRQ    IRQ_TMIO(2)
 
+#define ESERIES_NR_IRQS	(IRQ_BOARD_START + 16)
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 06abd4160607..9b898680b206 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -14,25 +14,15 @@
 
 /*
 GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
-interrupt signal for determining cable presence. On the original gumstix,
-this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+interrupt signal for determining cable presence. On the gumstix F,
 this moves to GPIO17 and GPIO37. */
 
 /* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
 has detected a cable insertion; driven low otherwise. */
 
-#ifdef CONFIG_ARCH_GUMSTIX_ORIG
-
-#define GPIO_GUMSTIX_USB_GPIOn		81
-#define GPIO_GUMSTIX_USB_GPIOx		83
-
-#else
-
 #define GPIO_GUMSTIX_USB_GPIOn		35
 #define GPIO_GUMSTIX_USB_GPIOx		41
 
-#endif
-
 /* usb state change */
 #define GUMSTIX_USB_INTR_IRQ		IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
 
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 3d8d8cb09685..814f1458a06a 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -14,11 +14,6 @@
 #define __ASM_ARCH_HARDWARE_H
 
 /*
- * We requires absolute addresses.
- */
-#define PCIO_BASE		0
-
-/*
  * Workarounds for at least 2 errata so far require this.
  * The mapping is set in mach-pxa/generic.c.
  */
@@ -269,23 +264,35 @@
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
  * == 0x3 for pxa300/pxa310/pxa320
  */
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
 #define __cpu_is_pxa2xx(id)				\
 	({						\
 		unsigned int _id = (id) >> 13 & 0x7;	\
 		_id <= 0x2;				\
 	 })
+#else
+#define __cpu_is_pxa2xx(id)	(0)
+#endif
 
+#ifdef CONFIG_PXA3xx
 #define __cpu_is_pxa3xx(id)				\
 	({						\
 		unsigned int _id = (id) >> 13 & 0x7;	\
 		_id == 0x3;				\
 	 })
+#else
+#define __cpu_is_pxa3xx(id)	(0)
+#endif
 
+#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
 #define __cpu_is_pxa93x(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
 		_id == 0x683 || _id == 0x693;		\
 	 })
+#else
+#define __cpu_is_pxa93x(id)	(0)
+#endif
 
 #define cpu_is_pxa2xx()					\
 	({						\
@@ -314,7 +321,7 @@ extern unsigned long get_clock_tick_rate(void);
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
 #endif
 
-
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
index 9eaeed1f87f1..37408449ec25 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -17,6 +17,7 @@
 
 #define HX4700_ASIC3_GPIO_BASE	NR_BUILTIN_GPIO
 #define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+#define HX4700_NR_IRQS		(IRQ_BOARD_START + 70)
 
 /*
  * PXA GPIOs
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
index 262691fb97d8..fdca3be47d9b 100644
--- a/arch/arm/mach-pxa/include/mach/io.h
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -6,6 +6,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <mach/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index ffc8314520f2..d372caa75dc7 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -117,48 +117,12 @@
 /*
  * The following interrupts are for board specific purposes. Since
  * the kernel can only run on one machine at a time, we can re-use
- * these.  There will be 16 IRQs by default.  If it is not enough,
- * IRQ_BOARD_END is allowed be customized for each board, but keep
- * the numbers within sensible limits and in descending order, so
- * when multiple config options are selected, the maximum will be
- * used.
+ * these.
+ * By default, no board IRQ is reserved. It should be finished in
+ * custom board since sparse IRQ is already enabled.
  */
 #define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
 
-#if defined(CONFIG_MACH_H4700)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 70)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 32)
-#elif defined(CONFIG_PXA_EZX)
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 23)
-#else
-#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
-#endif
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS			(IRQ_BOARD_END + 55)
-#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
-#define NR_IRQS			(IRQ_BOARD_END)
-#else
 #define NR_IRQS			(IRQ_BOARD_START)
-#endif
-
-/* add IT8152 IRQs beyond BOARD_END */
-#ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_LAST_IRQ         (IRQ_BOARD_END + 40)
-
-#if NR_IRQS < (IT8152_LAST_IRQ+1)
-#undef NR_IRQS
-#define NR_IRQS (IT8152_LAST_IRQ+1)
-#endif
-
-#endif /* CONFIG_PCI_HOST_ITE8152 */
 
 #endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 6c9b21c51322..2a5726c15e0e 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -10,4 +10,6 @@
 #define EXT0_GPIO_BASE	(NR_BUILTIN_GPIO)
 #define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
 
+#define LITTLETON_NR_IRQS	(IRQ_BOARD_START + 8)
+
 #endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index 0e6440c81683..cd070092b6eb 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -38,5 +38,6 @@
 #define LPD270_USBC_IRQ		LPD270_IRQ(2)
 #define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
 #define LPD270_AC97_IRQ		LPD270_IRQ(4)
+#define LPD270_NR_IRQS		(IRQ_BOARD_START + 5)
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index a0d4247f08fc..2a086e8373eb 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -45,6 +45,9 @@
 #define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
 #define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
 
+#define LUBBOCK_SA1111_IRQ_BASE	(IRQ_BOARD_START + 16)
+#define LUBBOCK_NR_IRQS		(IRQ_BOARD_START + 16 + 55)
+
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 20ef37d4a9a7..0a2efcf7947c 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -71,6 +71,8 @@
 #define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
 #define IRQ_MAGICIAN_VBUS	(IRQ_BOARD_START + 3)
 
+#define MAGICIAN_NR_IRQS	(IRQ_BOARD_START + 8)
+
 /*
  * CPLD EGPIOs
  */
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 86e623abd64d..4c2d11cd824d 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -134,4 +134,6 @@
 #define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
 
+#define MAINSTONE_NR_IRQS	(IRQ_BOARD_START + 16)
+
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
index f626730ee42e..92361a66b223 100644
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -17,24 +17,11 @@
  */
 #define PHYS_OFFSET	UL(0xa0000000)
 
-/*
- * The nodes are matched with the physical SDRAM banks as follows:
- *
- * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
- * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
- * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
- * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
- *
- * This needs a node mem size of 26 bits.
- */
-#define NODE_MEM_SIZE_BITS	26
-
 #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
-			     unsigned long *holes);
+void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes);
 
-#define arch_adjust_zones(node, size, holes) \
-	cmx2xx_pci_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	cmx2xx_pci_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index 7139e0dc26d1..4e1287070d21 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -71,10 +71,10 @@
 #define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
 #define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
 #define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
-#define GPIO52_CI_HSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
-#define GPIO51_CI_VSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
 #define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
 #define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
+#define GPIO51_CI_HSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO52_CI_VSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
 
 /* KEYPAD */
 #define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
index 0d119d3b9221..04f7c97044f3 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -69,6 +69,7 @@
 #define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
 #define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
 #define RDY_GPIO_62		MFP_CFG(RDY, AF0)
+#define PMIC_INT_GPIO83		MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
 
 /* Chip Select */
 #define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
@@ -92,6 +93,9 @@
 #define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
 #define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
 
+#define GPIO73_CI2C_SCL		MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
+#define GPIO74_CI2C_SDA		MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
+
 #define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
 #define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
 
@@ -345,6 +349,9 @@
 #define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
 #define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
 
+#define GPIO53_UART1_TXD	MFP_CFG(GPIO53, AF2)
+#define GPIO54_UART1_RXD	MFP_CFG(GPIO54, AF2)
+
 /* UART2 - BTUART */
 #define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
 #define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h
new file mode 100644
index 000000000000..0a5e5eadebf5
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palm27x.h
@@ -0,0 +1,81 @@
+/*
+ * Common functions for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef	__INCLUDE_MACH_PALM27X__
+#define	__INCLUDE_MACH_PALM27X__
+
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+extern void __init palm27x_mmc_init(int detect, int ro, int power,
+					int power_inverted);
+#else
+static inline void palm27x_mmc_init(int detect, int ro, int power,
+					int power_inverted)
+{}
+#endif
+
+#if defined(CONFIG_SUSPEND)
+extern void __init palm27x_pm_init(unsigned long str_base);
+#else
+static inline void palm27x_pm_init(unsigned long str_base) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+extern struct pxafb_mode_info palm_320x480_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_lcd_mode;
+extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
+extern void __init palm27x_lcd_init(int power,
+					struct pxafb_mode_info *mode);
+#else
+static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {}
+#endif
+
+#if	defined(CONFIG_USB_GADGET_PXA27X) || \
+	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+extern void __init palm27x_udc_init(int vbus, int pullup,
+					int vbus_inverted);
+#else
+static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
+#endif
+
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+extern void __init palm27x_irda_init(int pwdn);
+#else
+static inline void palm27x_irda_init(int pwdn) {}
+#endif
+
+#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
+					int reset);
+#else
+static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
+#endif
+
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+extern void __init palm27x_pwm_init(int bl, int lcd);
+#else
+static inline void palm27x_pwm_init(int bl, int lcd) {}
+#endif
+
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+extern void __init palm27x_power_init(int ac, int usb);
+#else
+static inline void palm27x_power_init(int ac, int usb) {}
+#endif
+
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+extern void __init palm27x_pmic_init(void);
+#else
+static inline void palm27x_pmic_init(void) {}
+#endif
+
+#endif	/* __INCLUDE_MACH_PALM27X__ */
diff --git a/arch/arm/mach-pxa/include/mach/pata_pxa.h b/arch/arm/mach-pxa/include/mach/pata_pxa.h
new file mode 100644
index 000000000000..6cf7df1d5830
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pata_pxa.h
@@ -0,0 +1,33 @@
+/*
+ * Generic PXA PATA driver
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef	__MACH_PATA_PXA_H__
+#define	__MACH_PATA_PXA_H__
+
+struct pata_pxa_pdata {
+	/* PXA DMA DREQ<0:2> pin */
+	uint32_t	dma_dreq;
+	/* Register shift */
+	uint32_t	reg_shift;
+	/* IRQ flags */
+	uint32_t	irq_flags;
+};
+
+#endif	/* __MACH_PATA_PXA_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 04083263167e..4bac588478a8 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -30,6 +30,8 @@
 #define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
 #define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
 
+#define PCM027_NR_IRQS		(IRQ_BOARD_START + 32)
+
 /* I2C RTC */
 #define PCM027_RTC_IRQ_GPIO	0
 #define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 0b3e6d051c64..83d1cfd00fc9 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -85,6 +85,8 @@
 #define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
 #define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
 
+#define POODLE_NR_IRQS		(IRQ_BOARD_START + 4)	/* 4 for LoCoMo */
+
 extern struct platform_device poodle_locomo_device;
 
 #endif /* __ASM_ARCH_POODLE_H  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
new file mode 100644
index 000000000000..9d82cb65ea56
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
@@ -0,0 +1,35 @@
+/*
+ * PXA3xx U2D header
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __PXA310_U2D__
+#define __PXA310_U2D__
+
+#include <linux/usb/ulpi.h>
+
+struct pxa3xx_u2d_platform_data {
+
+#define ULPI_SER_6PIN	(1 << 0)
+#define ULPI_SER_3PIN	(1 << 1)
+	unsigned int ulpi_mode;
+
+	int (*init)(struct device *);
+	void (*exit)(struct device *);
+};
+
+
+/* Start PXA3xx U2D host */
+int pxa3xx_u2d_start_hc(struct usb_bus *host);
+/* Stop PXA3xx U2D host */
+void pxa3xx_u2d_stop_hc(struct usb_bus *host);
+
+extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info);
+
+#endif /* __PXA310_U2D__ */
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
deleted file mode 100644
index 8242e14a44fa..000000000000
--- a/arch/arm/mach-pxa/include/mach/sharpsl.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * SharpSL SSP Driver
- */
-
-unsigned long corgi_ssp_ads7846_putget(unsigned long);
-unsigned long corgi_ssp_ads7846_get(void);
-void corgi_ssp_ads7846_put(unsigned long data);
-void corgi_ssp_ads7846_lock(void);
-void corgi_ssp_ads7846_unlock(void);
-void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
-void corgi_ssp_blduty_set(int duty);
-int corgi_ssp_max1111_get(unsigned long data);
-
-/*
- * SharpSL Touchscreen Driver
- */
-
-struct corgits_machinfo {
-	unsigned long (*get_hsync_invperiod)(void);
-	void (*put_hsync)(void);
-	void (*wait_hsync)(void);
-};
-
-
-/*
- * SharpSL Backlight
- */
-extern void corgibl_limit_intensity(int limit);
-extern void corgi_lcd_limit_intensity(int limit);
-
-
-/*
- * SharpSL Battery/PM Driver
- */
-extern void sharpsl_battery_kick(void);
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
index 1920dc6b05dc..905be6755f04 100644
--- a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
@@ -93,6 +93,8 @@ struct sharpsl_pm_status {
 
 extern struct sharpsl_pm_status sharpsl_pm;
 
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
 
 #define SHARPSL_LED_ERROR  2
 #define SHARPSL_LED_ON     1
@@ -101,4 +103,11 @@ extern struct sharpsl_pm_status sharpsl_pm;
 void sharpsl_battery_kick(void);
 void sharpsl_pm_led(int val);
 
+/* MAX1111 Channel Definitions */
+#define MAX1111_BATT_VOLT   4u
+#define MAX1111_BATT_TEMP   2u
+#define MAX1111_ACIN_VOLT   6u
+int sharpsl_pm_pxa_read_max1111(int channel);
+
+void corgi_lcd_limit_intensity(int limit);
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index fa1998caa78e..685749a51c42 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -185,7 +185,5 @@
 /*
  * Shared data structures
  */
-extern struct platform_device spitzscoop_device;
-extern struct platform_device spitzscoop2_device;
 extern struct platform_device spitzssp_device;
 extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 1bbd1f2e4beb..1272c4b56ceb 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -20,6 +20,7 @@
 /* Jacket Scoop */
 #define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
 
+#define TOSA_NR_IRQS		(IRQ_BOARD_START + TC6393XB_NR_IRQS)
 /*
  * SCOOP2 internal GPIOs
  */
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index 6e119976003e..faa408ab7ad7 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -15,6 +15,8 @@
 #ifndef _MACH_ZEUS_H
 #define _MACH_ZEUS_H
 
+#define ZEUS_NR_IRQS		(IRQ_BOARD_START + 48)
+
 /* Physical addresses */
 #define ZEUS_FLASH_PHYS		PXA_CS0_PHYS
 #define ZEUS_ETH0_PHYS		PXA_CS1_PHYS
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index 9edf645368d6..ea24998b923c 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -5,6 +5,8 @@
 
 #define EXT_GPIO(x)		(128 + (x))
 
+#define ZYLONITE_NR_IRQS	(IRQ_BOARD_START + 32)
+
 /* the following variables are processor specific and initialized
  * by the corresponding zylonite_pxa3xx_init()
  */
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 9b9046185b00..41aa89e35772 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -43,7 +43,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/littleton.h>
 #include <plat/i2c.h>
 #include <plat/pxa3xx_nand.h>
@@ -437,10 +437,9 @@ static void __init littleton_init(void)
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= LITTLETON_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= littleton_init,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index d279507fc748..623af0232a54 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -505,10 +505,9 @@ static void __init lpd270_map_io(void)
 
 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
 	/* Maintainer: Peter Barada */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= lpd270_map_io,
+	.nr_irqs	= LPD270_NR_IRQS,
 	.init_irq	= lpd270_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lpd270_init,
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 330c3282856e..1499493cd070 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -229,7 +229,7 @@ static struct resource sa1111_resources[] = {
 };
 
 static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= IRQ_BOARD_END,
+	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
 };
 
 static struct platform_device sa1111_device = {
@@ -557,9 +557,8 @@ static void __init lubbock_map_io(void)
 
 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 	/* Maintainer: MontaVista Software Inc. */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= lubbock_map_io,
+	.nr_irqs	= LUBBOCK_NR_IRQS,
 	.init_irq	= lubbock_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lubbock_init,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index e81dd0c8e40d..90663760307a 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -764,10 +764,9 @@ static void __init magician_init(void)
 
 
 MACHINE_START(MAGICIAN, "HTC Magician")
-	.phys_io = 0x40000000,
-	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params = 0xa0000100,
 	.map_io = pxa_map_io,
+	.nr_irqs = MAGICIAN_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.init_machine = magician_init,
 	.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 5543c64da9ef..a980a5c93e49 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -50,7 +50,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -624,10 +624,9 @@ static void __init mainstone_map_io(void)
 
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,	/* BLOB boot parameter setting */
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= mainstone_map_io,
+	.nr_irqs	= MAINSTONE_NR_IRQS,
 	.init_irq	= mainstone_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= mainstone_init,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index fa6a708b4099..f5fb915e1315 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -34,7 +34,7 @@
 #include <linux/irq.h>
 #include <linux/pda_power.h>
 #include <linux/power_supply.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/mtd/physmap.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/regulator/max1586.h>
@@ -45,7 +45,7 @@
 
 #include <mach/pxa27x.h>
 #include <mach/regs-rtc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
@@ -636,7 +636,7 @@ static struct platform_device power_dev = {
 	},
 };
 
-static struct wm97xx_batt_info mioa701_battery_data = {
+static struct wm97xx_batt_pdata mioa701_battery_data = {
 	.batt_aux	= WM97XX_AUX_ID1,
 	.temp_aux	= -1,
 	.charge_gpio	= -1,
@@ -648,6 +648,10 @@ static struct wm97xx_batt_info mioa701_battery_data = {
 	.batt_name	= "mioa701_battery",
 };
 
+static struct wm97xx_pdata mioa701_wm97xx_pdata = {
+	.batt_pdata	= &mioa701_battery_data,
+};
+
 /*
  * Voltage regulation
  */
@@ -707,7 +711,6 @@ static struct soc_camera_link iclink = {
 	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
 	.board_info	= &mioa701_i2c_devices[0],
 	.i2c_adapter_id	= 0,
-	.module_name	= "mt9m111",
 };
 
 struct i2c_pxa_platform_data i2c_pdata = {
@@ -716,6 +719,7 @@ struct i2c_pxa_platform_data i2c_pdata = {
 
 static pxa2xx_audio_ops_t mioa701_ac97_info = {
 	.reset_gpio = 95,
+	.codec_pdata = { &mioa701_wm97xx_pdata, },
 };
 
 /*
@@ -794,7 +798,6 @@ static void __init mioa701_machine_init(void)
 	set_pxa_fb_info(&mioa701_pxafb_info);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
-	wm97xx_bat_set_pdata(&mioa701_battery_data);
 	pxa_set_udc_info(&mioa701_udc_info);
 	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
@@ -815,8 +818,6 @@ static void mioa701_machine_exit(void)
 }
 
 MACHINE_START(MIOA701, "MIO A701")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= &pxa_map_io,
 	.init_irq	= &pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 6d4503927a76..116167aaba68 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -92,9 +92,7 @@ static void __init mp900c_init(void)
 
 /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
 MACHINE_START(NEC_MP900, "MobilePro900/C")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0220100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.timer		= &pxa_timer,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
new file mode 100644
index 000000000000..405b92a29793
--- /dev/null
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -0,0 +1,481 @@
+/*
+ * Common code for Palm LD, T5, TX, Z72
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx.h>
+#include <linux/power_supply.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/regulator/max1586.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+#include <mach/palmasoc.h>
+#include <mach/palm27x.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data palm27x_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.detect_delay_ms	= 200,
+};
+
+void __init palm27x_mmc_init(int detect, int ro, int power,
+					int power_inverted)
+{
+	palm27x_mci_platform_data.gpio_card_detect	= detect;
+	palm27x_mci_platform_data.gpio_card_ro		= ro;
+	palm27x_mci_platform_data.gpio_power		= power;
+	palm27x_mci_platform_data.gpio_power_invert	= power_inverted;
+
+	pxa_set_mci_info(&palm27x_mci_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#if defined(CONFIG_SUSPEND)
+void __init palm27x_pm_init(unsigned long str_base)
+{
+	static const unsigned long resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/*
+	 * Copy the bootloader.
+	 * NOTE: PalmZ72 uses a different wakeup method!
+	 */
+	memcpy(phys_to_virt(str_base), resume, sizeof(resume));
+}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+struct pxafb_mode_info palm_320x480_lcd_mode = {
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+};
+
+struct pxafb_mode_info palm_320x320_lcd_mode = {
+	.pixclock	= 115384,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 27,
+	.right_margin	= 7,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 6,
+	.vsync_len	= 1,
+};
+
+struct pxafb_mode_info palm_320x320_new_lcd_mode = {
+	.pixclock	= 86538,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 20,
+	.right_margin	= 8,
+	.upper_margin	= 8,
+	.lower_margin	= 5,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+};
+
+static struct pxafb_mach_info palm27x_lcd_screen = {
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int palm27x_lcd_power;
+static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
+{
+	gpio_set_value(palm27x_lcd_power, on);
+}
+
+void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
+{
+	palm27x_lcd_screen.modes = mode;
+
+	if (gpio_is_valid(power)) {
+		if (!gpio_request(power, "LCD power")) {
+			pr_err("Palm27x: failed to claim lcd power gpio!\n");
+			return;
+		}
+		if (!gpio_direction_output(power, 1)) {
+			pr_err("Palm27x: lcd power configuration failed!\n");
+			return;
+		}
+		palm27x_lcd_power = power;
+		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
+	}
+
+	set_pxa_fb_info(&palm27x_lcd_screen);
+}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if	defined(CONFIG_USB_GADGET_PXA27X) || \
+	defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info palm27x_udc_info = {
+	.gpio_vbus_inverted	= 1,
+};
+
+static struct platform_device palm27x_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palm27x_udc_info,
+	},
+};
+
+void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
+{
+	palm27x_udc_info.gpio_vbus	= vbus;
+	palm27x_udc_info.gpio_pullup	= pullup;
+
+	palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
+
+	if (!gpio_request(pullup, "USB Pullup")) {
+		gpio_direction_output(pullup,
+			palm27x_udc_info.gpio_vbus_inverted);
+		gpio_free(pullup);
+	} else
+		return;
+
+	platform_device_register(&palm27x_gpio_vbus);
+}
+#endif
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
+static struct pxaficp_platform_data palm27x_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+};
+
+void __init palm27x_irda_init(int pwdn)
+{
+	palm27x_ficp_platform_data.gpio_pwdown = pwdn;
+	pxa_set_ficp_info(&palm27x_ficp_platform_data);
+}
+#endif
+
+/******************************************************************************
+ * WM97xx audio, battery
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
+	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
+static struct wm97xx_batt_pdata palm27x_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+static struct wm97xx_pdata palm27x_wm97xx_pdata = {
+	.batt_pdata	= &palm27x_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
+	.codec_pdata	= { &palm27x_wm97xx_pdata, },
+};
+
+static struct palm27x_asoc_info palm27x_asoc_pdata = {
+	.jack_gpio	= -1,
+};
+
+static struct platform_device palm27x_asoc = {
+	.name = "palm27x-asoc",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palm27x_asoc_pdata,
+	},
+};
+
+void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
+{
+	palm27x_ac97_pdata.reset_gpio	= reset;
+	palm27x_asoc_pdata.jack_gpio	= jack;
+
+	if (minv < 0 || maxv < 0) {
+		palm27x_ac97_pdata.codec_pdata[0] = NULL;
+		pxa_set_ac97_info(&palm27x_ac97_pdata);
+	} else {
+		palm27x_batt_pdata.min_voltage	= minv,
+		palm27x_batt_pdata.max_voltage	= maxv,
+
+		pxa_set_ac97_info(&palm27x_ac97_pdata);
+		platform_device_register(&palm27x_asoc);
+	}
+}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static int palm_bl_power;
+static int palm_lcd_power;
+
+static int palm27x_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(palm_bl_power, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(palm_bl_power, 0);
+	if (ret)
+		goto err2;
+
+	if (gpio_is_valid(palm_lcd_power)) {
+		ret = gpio_request(palm_lcd_power, "LCD POWER");
+		if (ret)
+			goto err2;
+		ret = gpio_direction_output(palm_lcd_power, 0);
+		if (ret)
+			goto err3;
+	}
+
+	return 0;
+err3:
+	gpio_free(palm_lcd_power);
+err2:
+	gpio_free(palm_bl_power);
+err:
+	return ret;
+}
+
+static int palm27x_backlight_notify(struct device *dev, int brightness)
+{
+	gpio_set_value(palm_bl_power, brightness);
+	if (gpio_is_valid(palm_lcd_power))
+		gpio_set_value(palm_lcd_power, brightness);
+	return brightness;
+}
+
+static void palm27x_backlight_exit(struct device *dev)
+{
+	gpio_free(palm_bl_power);
+	if (gpio_is_valid(palm_lcd_power))
+		gpio_free(palm_lcd_power);
+}
+
+static struct platform_pwm_backlight_data palm27x_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 0xfe,
+	.dft_brightness	= 0x7e,
+	.pwm_period_ns	= 3500,
+	.init		= palm27x_backlight_init,
+	.notify		= palm27x_backlight_notify,
+	.exit		= palm27x_backlight_exit,
+};
+
+static struct platform_device palm27x_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palm27x_backlight_data,
+	},
+};
+
+void __init palm27x_pwm_init(int bl, int lcd)
+{
+	palm_bl_power	= bl;
+	palm_lcd_power	= lcd;
+	platform_device_register(&palm27x_backlight);
+}
+#endif
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
+static int palm_ac_state;
+static int palm_usb_state;
+
+static int palm27x_power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(palm_ac_state, "AC state");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(palm_ac_state);
+	if (ret)
+		goto err2;
+
+	if (gpio_is_valid(palm_usb_state)) {
+		ret = gpio_request(palm_usb_state, "USB state");
+		if (ret)
+			goto err2;
+		ret = gpio_direction_input(palm_usb_state);
+		if (ret)
+			goto err3;
+	}
+
+	return 0;
+err3:
+	gpio_free(palm_usb_state);
+err2:
+	gpio_free(palm_ac_state);
+err1:
+	return ret;
+}
+
+static void palm27x_power_supply_exit(struct device *dev)
+{
+	gpio_free(palm_usb_state);
+	gpio_free(palm_ac_state);
+}
+
+static int palm27x_is_ac_online(void)
+{
+	return gpio_get_value(palm_ac_state);
+}
+
+static int palm27x_is_usb_online(void)
+{
+	return !gpio_get_value(palm_usb_state);
+}
+static char *palm27x_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata palm27x_ps_info = {
+	.init			= palm27x_power_supply_init,
+	.exit			= palm27x_power_supply_exit,
+	.is_ac_online		= palm27x_is_ac_online,
+	.is_usb_online		= palm27x_is_usb_online,
+	.supplied_to		= palm27x_supplicants,
+	.num_supplicants	= ARRAY_SIZE(palm27x_supplicants),
+};
+
+static struct platform_device palm27x_power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &palm27x_ps_info,
+	},
+};
+
+void __init palm27x_power_init(int ac, int usb)
+{
+	palm_ac_state	= ac;
+	palm_usb_state	= usb;
+	platform_device_register(&palm27x_power_supply);
+}
+#endif
+
+/******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data palm27x_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 900000,
+		.max_uV		= 1705000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.consumer_supplies	= palm27x_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(palm27x_max1587a_consumers),
+};
+
+static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
+	{
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &palm27x_max1587a_v3_info,
+	}
+};
+
+static struct max1586_platform_data palm27x_max1587a_info = {
+	.subdevs     = palm27x_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &palm27x_max1587a_info,
+	},
+};
+
+static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
+	.use_pio	= 1,
+};
+
+void __init palm27x_pmic_init(void)
+{
+	i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
+	pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
+}
+#endif
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 1963819dba98..ce092c521e6d 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -22,7 +22,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/sysdev.h>
 #include <linux/mtd/mtd.h>
@@ -39,8 +39,9 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -127,6 +128,7 @@ static unsigned long palmld_pin_config[] __initdata = {
 /******************************************************************************
  * NOR Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition palmld_partitions[] = {
 	{
 		.name		= "Flash",
@@ -160,20 +162,18 @@ static struct platform_device palmld_flash = {
 	},
 };
 
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmld_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMLD_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMLD_SD_READONLY,
-	.gpio_power		= GPIO_NR_PALMLD_SD_POWER,
-	.detect_delay_ms	= 200,
-};
+static void __init palmld_nor_init(void)
+{
+	platform_device_register(&palmld_flash);
+}
+#else
+static inline void palmld_nor_init(void) {}
+#endif
 
 /******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmld_matrix_keys[] = {
 	KEY(0, 1, KEY_F2),
 	KEY(0, 2, KEY_UP),
@@ -200,9 +200,18 @@ static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
+static void __init palmld_kpc_init(void)
+{
+	pxa_set_keypad_info(&palmld_keypad_platform_data);
+}
+#else
+static inline void palmld_kpc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmld_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
 	{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
@@ -222,77 +231,18 @@ static struct platform_device palmld_pxa_keys = {
 	},
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmld_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMLD_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMLD_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmld_backlight_notify(struct device *dev, int brightness)
+static void __init palmld_keys_init(void)
 {
-	gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
-	return brightness;
+	platform_device_register(&palmld_pxa_keys);
 }
-
-static void palmld_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMLD_BL_POWER);
-	gpio_free(GPIO_NR_PALMLD_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmld_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMLD_MAX_INTENSITY,
-	.dft_brightness	= PALMLD_MAX_INTENSITY,
-	.pwm_period_ns	= PALMLD_PERIOD_NS,
-	.init		= palmld_backlight_init,
-	.notify		= palmld_backlight_notify,
-	.exit		= palmld_backlight_exit,
-};
-
-static struct platform_device palmld_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmld_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmld_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMLD_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
+#else
+static inline void palmld_keys_init(void) {}
+#endif
 
 /******************************************************************************
  * LEDs
  ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 struct gpio_led gpio_leds[] = {
 {
 	.name			= "palmld:green:led",
@@ -318,174 +268,34 @@ static struct platform_device palmld_leds = {
 	}
 };
 
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N, "CABLE_STATE_USB");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N);
-	if (ret)
-		goto err3;
-
-	return 0;
-
-err3:
-	gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
-err2:
-	gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmld_is_ac_online(void)
+static void __init palmld_leds_init(void)
 {
-	return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT);
+	platform_device_register(&palmld_leds);
 }
-
-static int palmld_is_usb_online(void)
-{
-	return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
-	gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
-}
-
-static char *palmld_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmld_is_ac_online,
-	.is_usb_online   = palmld_is_usb_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmld_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmld_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMLD_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMLD_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmld_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMLD_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmld_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct platform_device palmld_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmld_asoc_pdata,
-	},
-};
+#else
+static inline void palmld_leds_init(void) {}
+#endif
 
 /******************************************************************************
  * HDD
  ******************************************************************************/
-static struct platform_device palmld_hdd = {
+#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
+static struct platform_device palmld_ide_device = {
 	.name	= "pata_palmld",
 	.id	= -1,
 };
 
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmld_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmld_lcd_screen = {
-	.modes		= palmld_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmld_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmld_pm_init(void)
+static void __init palmld_ide_init(void)
 {
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* copy the bootloader */
-	memcpy(phys_to_virt(PALMLD_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmld_ide_device);
 }
+#else
+static inline void palmld_ide_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmld_pxa_keys,
-#endif
-	&palmld_backlight,
-	&palmld_leds,
-	&power_supply,
-	&palmld_asoc,
-	&palmld_hdd,
-	&palmld_flash,
-};
-
 static struct map_desc palmld_io_desc[] __initdata = {
 {
 	.virtual	= PALMLD_IDE_VIRT,
@@ -510,25 +320,29 @@ static void __init palmld_map_io(void)
 static void __init palmld_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	palmld_pm_init();
-	set_pxa_fb_info(&palmld_lcd_screen);
-	pxa_set_mci_info(&palmld_mci_platform_data);
-	pxa_set_ac97_info(&palmld_ac97_pdata);
-	pxa_set_ficp_info(&palmld_ficp_platform_data);
-	pxa_set_keypad_info(&palmld_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMLD_SD_DETECT_N, GPIO_NR_PALMLD_SD_READONLY,
+			GPIO_NR_PALMLD_SD_POWER, 0);
+	palm27x_pm_init(PALMLD_STR_BASE);
+	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+	palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
+	palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
+			GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
+	palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
+	palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT,
+			GPIO_NR_PALMLD_USB_DETECT_N);
+	palm27x_pmic_init();
+	palmld_kpc_init();
+	palmld_keys_init();
+	palmld_nor_init();
+	palmld_leds_init();
+	palmld_ide_init();
 }
 
 MACHINE_START(PALMLD, "Palm LifeDrive")
-	.phys_io	= PALMLD_PHYS_IO_START,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= palmld_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 5305a3993e69..862da812cd10 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -21,10 +21,11 @@
 #include <linux/irq.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/memblock.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 
@@ -38,9 +39,10 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -103,19 +105,9 @@ static unsigned long palmt5_pin_config[] __initdata = {
 };
 
 /******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmt5_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMT5_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMT5_SD_READONLY,
-	.gpio_power		= GPIO_NR_PALMT5_SD_POWER,
-	.detect_delay_ms	= 200,
-};
-
-/******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmt5_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
@@ -141,9 +133,18 @@ static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
+static void __init palmt5_kpc_init(void)
+{
+	pxa_set_keypad_info(&palmt5_keypad_platform_data);
+}
+#else
+static inline void palmt5_kpc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmt5_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
 };
@@ -161,266 +162,49 @@ static struct platform_device palmt5_pxa_keys = {
 	},
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmt5_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMT5_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMT5_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmt5_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmt5_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMT5_BL_POWER);
-	gpio_free(GPIO_NR_PALMT5_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmt5_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMT5_MAX_INTENSITY,
-	.dft_brightness	= PALMT5_MAX_INTENSITY,
-	.pwm_period_ns	= PALMT5_PERIOD_NS,
-	.init		= palmt5_backlight_init,
-	.notify		= palmt5_backlight_notify,
-	.exit		= palmt5_backlight_exit,
-};
-
-static struct platform_device palmt5_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmt5_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmt5_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMT5_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmt5_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMT5_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMT5_USB_PULLUP,
-};
-
-static struct platform_device palmt5_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmt5_udc_info,
-	},
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
+static void __init palmt5_keys_init(void)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-err2:
-	gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmt5_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
-}
-
-static char *palmt5_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmt5_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmt5_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmt5_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMT5_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMT5_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmt5_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMT5_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct platform_device palmt5_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmt5_asoc_pdata,
-	},
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmt5_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmt5_lcd_screen = {
-	.modes		= palmt5_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmt5_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmt5_pm_init(void)
-{
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* copy the bootloader */
-	memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmt5_pxa_keys);
 }
+#else
+static inline void palmt5_keys_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmt5_pxa_keys,
-#endif
-	&palmt5_backlight,
-	&power_supply,
-	&palmt5_asoc,
-	&palmt5_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmt5_udc_init(void)
+static void __init palmt5_reserve(void)
 {
-	if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
-	}
+	memblock_reserve(0xa0200000, 0x1000);
 }
 
 static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	palmt5_pm_init();
-	set_pxa_fb_info(&palmt5_lcd_screen);
-	pxa_set_mci_info(&palmt5_mci_platform_data);
-	palmt5_udc_init();
-	pxa_set_ac97_info(&palmt5_ac97_pdata);
-	pxa_set_ficp_info(&palmt5_ficp_platform_data);
-	pxa_set_keypad_info(&palmt5_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMT5_SD_DETECT_N, GPIO_NR_PALMT5_SD_READONLY,
+			GPIO_NR_PALMT5_SD_POWER, 0);
+	palm27x_pm_init(PALMT5_STR_BASE);
+	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+	palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
+			GPIO_NR_PALMT5_USB_PULLUP, 1);
+	palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
+	palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
+			GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
+	palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
+	palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1);
+	palm27x_pmic_init();
+	palmt5_kpc_init();
+	palmt5_keys_init();
 }
 
 MACHINE_START(PALMT5, "Palm Tungsten|T5")
-	.phys_io	= PALMT5_PHYS_IO_START,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
+	.reserve	= palmt5_reserve,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmt5_init
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index ce1104d1bc17..2131d5860919 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -412,9 +412,7 @@ static void __init palmtc_init(void)
 };
 
 MACHINE_START(PALMTC, "Palm Tungsten|C")
-	.phys_io	= 0x40000000,
 	.boot_params 	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 3d284ff1a64e..a9dae7bc35d9 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -23,7 +23,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 
@@ -271,9 +271,9 @@ static struct platform_device power_supply = {
 };
 
 /******************************************************************************
- * WM97xx battery
+ * WM97xx audio, battery
  ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
+static struct wm97xx_batt_pdata palmte2_batt_pdata = {
 	.batt_aux	= WM97XX_AUX_ID3,
 	.temp_aux	= WM97XX_AUX_ID2,
 	.charge_gpio	= -1,
@@ -287,9 +287,14 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = {
 	.batt_name	= "main-batt",
 };
 
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
+static struct wm97xx_pdata palmte2_wm97xx_pdata = {
+	.batt_pdata	= &palmte2_batt_pdata,
+};
+
+static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
+	.codec_pdata	= { &palmte2_wm97xx_pdata, },
+};
+
 static struct palm27x_asoc_info palmte2_asoc_pdata = {
 	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
 };
@@ -361,16 +366,13 @@ static void __init palmte2_init(void)
 	set_pxa_fb_info(&palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
-	pxa_set_ac97_info(NULL);
+	pxa_set_ac97_info(&palmte2_ac97_pdata);
 	pxa_set_ficp_info(&palmte2_ficp_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 MACHINE_START(PALMTE2, "Palm Tungsten|E2")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index d8b4469607a1..00e2d7ba84ed 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -20,10 +20,10 @@
 #include <linux/irq.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/memblock.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
 #include <linux/sysdev.h>
 #include <linux/w1-gpio.h>
@@ -39,12 +39,13 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/palmasoc.h>
 #include <mach/camera.h>
+#include <mach/palm27x.h>
 
 #include <sound/pxa2xx-lib.h>
 
@@ -159,31 +160,9 @@ static unsigned long centro685_pin_config[] __initdata = {
 #endif /* CONFIG_MACH_CENTRO */
 
 /******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
-static struct pxamci_platform_data treo680_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_TREO680_SD_READONLY,
-	.gpio_power		= GPIO_NR_TREO680_SD_POWER,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static struct pxamci_platform_data centro_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
-	.gpio_card_ro		= -1,
-	.gpio_power		= GPIO_NR_CENTRO_SD_POWER,
-	.gpio_power_invert	= 1,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int treo680_matrix_keys[] = {
 	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
 	KEY(0, 1, KEY_LEFT),
@@ -243,19 +222,6 @@ static unsigned int treo680_matrix_keys[] = {
 	KEY(7, 5, KEY_I),
 };
 
-static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 7,
-	.matrix_key_map		= treo680_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
-	.direct_key_map		= { KEY_CONNECT },
-	.direct_key_num		= 1,
-
-	.debounce_interval	= 30,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
 static unsigned int centro_matrix_keys[] = {
 	KEY(0, 0, KEY_F9),		/* Home */
 	KEY(0, 1, KEY_LEFT),
@@ -315,157 +281,50 @@ static unsigned int centro_matrix_keys[] = {
 	KEY(7, 5, KEY_I),
 };
 
-static struct pxa27x_keypad_platform_data centro_keypad_platform_data = {
+static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
 	.matrix_key_rows	= 8,
 	.matrix_key_cols	= 7,
-	.matrix_key_map		= centro_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(centro_matrix_keys),
+	.matrix_key_map		= treo680_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
 	.direct_key_map		= { KEY_CONNECT },
 	.direct_key_num		= 1,
 
 	.debounce_interval	= 30,
 };
-#endif /* CONFIG_MACH_CENTRO */
 
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-
-static pxa2xx_audio_ops_t treo_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int treo_backlight_init(struct device *dev)
+static void __init palmtreo_kpc_init(void)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0);
-	if (ret)
-		goto err2;
+	static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
 
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_TREO_BL_POWER);
-err:
-	return ret;
-}
-
-static int treo_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
-	return TREO_MAX_INTENSITY - brightness;
-};
+	if (machine_is_centro()) {
+		data->matrix_key_map = centro_matrix_keys;
+		data->matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys);
+	}
 
-static void treo_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_TREO_BL_POWER);
+	pxa_set_keypad_info(&treo680_keypad_pdata);
 }
-
-static struct platform_pwm_backlight_data treo_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= TREO_MAX_INTENSITY,
-	.dft_brightness	= TREO_DEFAULT_INTENSITY,
-	.pwm_period_ns	= TREO_PERIOD_NS,
-	.init		= treo_backlight_init,
-	.notify		= treo_backlight_notify,
-	.exit		= treo_backlight_exit,
-};
-
-static struct platform_device treo_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &treo_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data treo_ficp_info = {
-	.gpio_pwdown		= GPIO_NR_TREO_IR_EN,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct pxa2xx_udc_mach_info treo_udc_info __initdata = {
-	.gpio_vbus		= GPIO_NR_TREO_USB_DETECT,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_TREO_USB_PULLUP,
-};
-
+#else
+static inline void palmtreo_kpc_init(void) {}
+#endif
 
 /******************************************************************************
  * USB host
  ******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static struct pxaohci_platform_data treo680_ohci_info = {
 	.port_mode    = PMM_PERPORT_MODE,
 	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
 	.power_budget = 0,
 };
-#endif /* CONFIG_MACH_TREO680 */
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_TREO_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int treo_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_TREO_POWER_DETECT);
-}
 
-static void power_supply_exit(struct device *dev)
+static void __init palmtreo_uhc_init(void)
 {
-	gpio_free(GPIO_NR_TREO_POWER_DETECT);
+	if (machine_is_treo680())
+		pxa_set_ohci_info(&treo680_ohci_info);
 }
-
-static char *treo_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init		 = power_supply_init,
-	.is_ac_online    = treo_is_ac_online,
-	.exit		 = power_supply_exit,
-	.supplied_to     = treo_supplicants,
-	.num_supplicants = ARRAY_SIZE(treo_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
+#else
+static inline void palmtreo_uhc_init(void) {}
+#endif
 
 /******************************************************************************
  * Vibra and LEDs
@@ -494,16 +353,6 @@ static struct gpio_led_platform_data treo680_gpio_led_info = {
 	.num_leds	= ARRAY_SIZE(treo680_gpio_leds),
 };
 
-static struct platform_device treo680_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &treo680_gpio_led_info,
-	}
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
 static struct gpio_led centro_gpio_leds[] = {
 	{
 		.name			= "centro:vibra:vibra",
@@ -528,171 +377,83 @@ static struct gpio_led_platform_data centro_gpio_led_info = {
 	.num_leds	= ARRAY_SIZE(centro_gpio_leds),
 };
 
-static struct platform_device centro_leds = {
+static struct platform_device palmtreo_leds = {
 	.name   = "leds-gpio",
 	.id     = -1,
 	.dev    = {
-		.platform_data  = &centro_gpio_led_info,
+		.platform_data  = &treo680_gpio_led_info,
 	}
 };
-#endif /* CONFIG_MACH_CENTRO */
 
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-/* TODO: add support for 324x324 */
-static struct pxafb_mode_info treo_lcd_modes[] = {
+static void __init palmtreo_leds_init(void)
 {
-	.pixclock		= 86538,
-	.xres			= 320,
-	.yres			= 320,
-	.bpp			= 16,
-
-	.left_margin		= 20,
-	.right_margin		= 8,
-	.upper_margin		= 8,
-	.lower_margin		= 5,
-
-	.hsync_len		= 4,
-	.vsync_len		= 1,
-},
-};
+	if (machine_is_centro())
+		palmtreo_leds.dev.platform_data = &centro_gpio_led_info;
 
-static void treo_lcd_power(int on, struct fb_var_screeninfo *info)
-{
-	gpio_set_value(GPIO_NR_TREO_BL_POWER, on);
-}
-
-static struct pxafb_mach_info treo_lcd_screen = {
-	.modes		= treo_lcd_modes,
-	.num_modes	= ARRAY_SIZE(treo_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init treo_pm_init(void)
-{
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* this is where the bootloader jumps */
-	memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmtreo_leds);
 }
+#else
+static inline void palmtreo_leds_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *treo_devices[] __initdata = {
-	&treo_backlight,
-	&power_supply,
-};
-
-#ifdef CONFIG_MACH_TREO680
-static struct platform_device *treo680_devices[] __initdata = {
-	&treo680_leds,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static struct platform_device *centro_devices[] __initdata = {
-	&centro_leds,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/* setup udc GPIOs initial state */
-static void __init treo_udc_init(void)
+static void __init treo_reserve(void)
 {
-	if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_TREO_USB_PULLUP);
-	}
+	memblock_reserve(0xa0000000, 0x1000);
+	memblock_reserve(0xa2000000, 0x1000);
 }
 
-static void __init treo_lcd_power_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER");
-	if (ret) {
-		pr_err("Treo680: LCD power GPIO request failed!\n");
-		return;
-	}
-
-	ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0);
-	if (ret) {
-		pr_err("Treo680: setting LCD power GPIO direction failed!\n");
-		gpio_free(GPIO_NR_TREO_LCD_POWER);
-		return;
-	}
-
-	treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
-}
-
-static void __init treo_init(void)
+static void __init palmphone_common_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
-
-	treo_pm_init();
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
-	treo_lcd_power_init();
-	set_pxa_fb_info(&treo_lcd_screen);
-	treo_udc_init();
-	pxa_set_udc_info(&treo_udc_info);
-	pxa_set_ac97_info(&treo_ac97_pdata);
-	pxa_set_ficp_info(&treo_ficp_info);
-
-	platform_add_devices(ARRAY_AND_SIZE(treo_devices));
+	palm27x_pm_init(TREO_STR_BASE);
+	palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
+	palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
+	palm27x_irda_init(GPIO_NR_TREO_IR_EN);
+	palm27x_ac97_init(-1, -1, -1, 95);
+	palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
+	palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
+	palm27x_pmic_init();
+	palmtreo_kpc_init();
+	palmtreo_uhc_init();
+	palmtreo_leds_init();
 }
 
-#ifdef CONFIG_MACH_TREO680
 static void __init treo680_init(void)
 {
-	treo_init();
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
-	pxa_set_mci_info(&treo680_mci_platform_data);
-	pxa_set_keypad_info(&treo680_keypad_platform_data);
-	pxa_set_ohci_info(&treo680_ohci_info);
+	palmphone_common_init();
+	palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
+			GPIO_NR_TREO680_SD_POWER, 0);
+}
 
-	platform_add_devices(ARRAY_AND_SIZE(treo680_devices));
+static void __init centro_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+	palmphone_common_init();
+	palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
+			GPIO_NR_CENTRO_SD_POWER, 1);
 }
 
 MACHINE_START(TREO680, "Palm Treo 680")
-	.phys_io        = TREO_PHYS_IO_START,
-	.io_pg_offst    = io_p2v(0x40000000),
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = treo680_init,
 MACHINE_END
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static void __init centro_init(void)
-{
-	treo_init();
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
-	pxa_set_mci_info(&centro_mci_platform_data);
-
-	pxa_set_keypad_info(&centro_keypad_platform_data);
-
-	platform_add_devices(ARRAY_AND_SIZE(centro_devices));
-}
 
 MACHINE_START(CENTRO, "Palm Centro 685")
-	.phys_io        = TREO_PHYS_IO_START,
-	.io_pg_offst    = io_p2v(0x40000000),
 	.boot_params    = 0xa0000100,
 	.map_io         = pxa_map_io,
+	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-       .init_machine   = centro_init,
+	.init_machine	= centro_init,
 MACHINE_END
-#endif /* CONFIG_MACH_CENTRO */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index ecc1a401598e..d2060a1d1d68 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -25,7 +25,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/mtd/nand.h>
@@ -43,9 +43,10 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -129,6 +130,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 /******************************************************************************
  * NOR Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition palmtx_partitions[] = {
 	{
 		.name		= "Flash",
@@ -162,20 +164,18 @@ static struct platform_device palmtx_flash = {
 	},
 };
 
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmtx_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMTX_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMTX_SD_READONLY,
-	.gpio_power		= GPIO_NR_PALMTX_SD_POWER,
-	.detect_delay_ms	= 200,
-};
+static void __init palmtx_nor_init(void)
+{
+	platform_device_register(&palmtx_flash);
+}
+#else
+static inline void palmtx_nor_init(void) {}
+#endif
 
 /******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmtx_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
@@ -201,9 +201,18 @@ static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
+static void __init palmtx_kpc_init(void)
+{
+	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+}
+#else
+static inline void palmtx_kpc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmtx_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
 };
@@ -221,208 +230,18 @@ static struct platform_device palmtx_pxa_keys = {
 	},
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmtx_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMTX_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmtx_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmtx_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTX_BL_POWER);
-	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
-}
-
-static struct platform_pwm_backlight_data palmtx_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMTX_MAX_INTENSITY,
-	.dft_brightness	= PALMTX_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTX_PERIOD_NS,
-	.init		= palmtx_backlight_init,
-	.notify		= palmtx_backlight_notify,
-	.exit		= palmtx_backlight_exit,
-};
-
-static struct platform_device palmtx_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmtx_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmtx_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTX_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmtx_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_PALMTX_USB_PULLUP,
-};
-
-static struct platform_device palmtx_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtx_udc_info,
-	},
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmtx_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
+static void __init palmtx_keys_init(void)
 {
-	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+	platform_device_register(&palmtx_pxa_keys);
 }
-
-static char *palmtx_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmtx_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmtx_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMTX_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMTX_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct palm27x_asoc_info palmtx_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMTX_EARPHONE_DETECT,
-};
-
-static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct platform_device palmtx_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmtx_asoc_pdata,
-	},
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmtx_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmtx_lcd_screen = {
-	.modes		= palmtx_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmtx_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+#else
+static inline void palmtx_keys_init(void) {}
+#endif
 
 /******************************************************************************
  * NAND Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
 static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
@@ -482,36 +301,17 @@ static struct platform_device palmtx_nand = {
 	}
 };
 
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init palmtx_pm_init(void)
+static void __init palmtx_nand_init(void)
 {
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* copy the bootloader */
-	memcpy(phys_to_virt(PALMTX_STR_BASE), resume, sizeof(resume));
+	platform_device_register(&palmtx_nand);
 }
+#else
+static inline void palmtx_nand_init(void) {}
+#endif
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmtx_pxa_keys,
-#endif
-	&palmtx_backlight,
-	&power_supply,
-	&palmtx_asoc,
-	&palmtx_gpio_vbus,
-	&palmtx_flash,
-	&palmtx_nand,
-};
-
 static struct map_desc palmtx_io_desc[] __initdata = {
 {
 	.virtual	= PALMTX_PCMCIA_VIRT,
@@ -537,39 +337,32 @@ static void __init palmtx_map_io(void)
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
-/* setup udc GPIOs initial state */
-static void __init palmtx_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
-	}
-}
-
-
 static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	palmtx_pm_init();
-	set_pxa_fb_info(&palmtx_lcd_screen);
-	pxa_set_mci_info(&palmtx_mci_platform_data);
-	palmtx_udc_init();
-	pxa_set_ac97_info(&palmtx_ac97_pdata);
-	pxa_set_ficp_info(&palmtx_ficp_platform_data);
-	pxa_set_keypad_info(&palmtx_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMTX_SD_DETECT_N, GPIO_NR_PALMTX_SD_READONLY,
+			GPIO_NR_PALMTX_SD_POWER, 0);
+	palm27x_pm_init(PALMTX_STR_BASE);
+	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
+	palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
+			GPIO_NR_PALMTX_USB_PULLUP, 1);
+	palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
+	palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
+			GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
+	palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
+	palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
+	palm27x_pmic_init();
+	palmtx_kpc_init();
+	palmtx_keys_init();
+	palmtx_nor_init();
+	palmtx_nand_init();
 }
 
 MACHINE_START(PALMTX, "Palm T|X")
-	.phys_io	= PALMTX_PHYS_IO_START,
-	.io_pg_offst	= io_p2v(0x40000000),
 	.boot_params	= 0xa0000100,
 	.map_io		= palmtx_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 3a7925ca3944..af6203fbca9c 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -27,7 +27,7 @@
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
 
@@ -41,9 +41,10 @@
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/udc.h>
 #include <mach/palmasoc.h>
+#include <mach/palm27x.h>
 
 #include <mach/pm.h>
 
@@ -109,21 +110,9 @@ static unsigned long palmz72_pin_config[] __initdata = {
 };
 
 /******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-/* SD_POWER is not actually power, but it is more like chip
- * select, i.e. it is inverted */
-static struct pxamci_platform_data palmz72_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_PALMZ72_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_PALMZ72_SD_RO,
-	.gpio_power		= GPIO_NR_PALMZ72_SD_POWER_N,
-	.gpio_power_invert	= 1,
-};
-
-/******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int palmz72_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
@@ -149,77 +138,18 @@ static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
 	.debounce_interval	= 30,
 };
 
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int palmz72_backlight_init(struct device *dev)
+static void __init palmz72_kpc_init(void)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
-err:
-	return ret;
-}
-
-static int palmz72_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmz72_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
-	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+	pxa_set_keypad_info(&palmz72_keypad_platform_data);
 }
-
-static struct platform_pwm_backlight_data palmz72_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= PALMZ72_MAX_INTENSITY,
-	.dft_brightness	= PALMZ72_MAX_INTENSITY,
-	.pwm_period_ns	= PALMZ72_PERIOD_NS,
-	.init		= palmz72_backlight_init,
-	.notify		= palmz72_backlight_notify,
-	.exit		= palmz72_backlight_exit,
-};
-
-static struct platform_device palmz72_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palmz72_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmz72_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMZ72_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
+#else
+static inline void palmz72_kpc_init(void) {}
+#endif
 
 /******************************************************************************
  * LEDs
  ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "palmz72:green:led",
@@ -241,139 +171,13 @@ static struct platform_device palmz72_leds = {
 	}
 };
 
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpio_vbus_mach_info palmz72_udc_info = {
-	.gpio_vbus		= GPIO_NR_PALMZ72_USB_DETECT_N,
-	.gpio_pullup		= GPIO_NR_PALMZ72_USB_PULLUP,
-};
-
-static struct platform_device palmz72_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmz72_udc_info,
-	},
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
-err2:
-	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmz72_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
-}
-
-static int palmz72_is_usb_online(void)
+static void __init palmz72_leds_init(void)
 {
-	return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
+	platform_device_register(&palmz72_leds);
 }
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
-	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
-}
-
-static char *palmz72_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmz72_is_ac_online,
-	.is_usb_online   = palmz72_is_usb_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmz72_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmz72_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx battery
- ******************************************************************************/
-static struct wm97xx_batt_info wm97xx_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.charge_gpio	= -1,
-	.max_voltage	= PALMZ72_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMZ72_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-static struct platform_device palmz72_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmz72_lcd_modes[] = {
-{
-	.pixclock	= 115384,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 27,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 6,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmz72_lcd_screen = {
-	.modes		= palmz72_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmz72_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
+#else
+static inline void palmz72_leds_init(void) {}
+#endif
 
 #ifdef CONFIG_PM
 
@@ -452,45 +256,29 @@ device_initcall(palmz72_pm_init);
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-	&palmz72_backlight,
-	&palmz72_leds,
-	&palmz72_asoc,
-	&power_supply,
-	&palmz72_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmz72_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) {
-		gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0);
-		gpio_free(GPIO_NR_PALMZ72_USB_PULLUP);
-	}
-}
-
 static void __init palmz72_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
-
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	set_pxa_fb_info(&palmz72_lcd_screen);
-	pxa_set_mci_info(&palmz72_mci_platform_data);
-	palmz72_udc_init();
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&palmz72_ficp_platform_data);
-	pxa_set_keypad_info(&palmz72_keypad_platform_data);
-	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palm27x_mmc_init(GPIO_NR_PALMZ72_SD_DETECT_N, GPIO_NR_PALMZ72_SD_RO,
+			GPIO_NR_PALMZ72_SD_POWER_N, 1);
+	palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
+	palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
+			GPIO_NR_PALMZ72_USB_PULLUP, 0);
+	palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
+	palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
+			-1, 113);
+	palm27x_pwm_init(-1, -1);
+	palm27x_power_init(-1, -1);
+	palm27x_pmic_init();
+	palmz72_kpc_init();
+	palmz72_leds_init();
 }
 
 MACHINE_START(PALMZ72, "Palm Zire72")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= io_p2v(0x40000000),
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 2190af066470..c77e8f30a439 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -259,9 +259,8 @@ static void __init pcm027_map_io(void)
 MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
 	/* Maintainer: Pengutronix */
 	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pcm027_map_io,
+	.nr_irqs	= PCM027_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= pcm027_init,
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index f56ae1008759..f33647a8e0b7 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -453,7 +453,6 @@ static struct soc_camera_link iclink[] = {
 		.query_bus_param	= pcm990_camera_query_bus_param,
 		.set_bus_param		= pcm990_camera_set_bus_param,
 		.free_bus		= pcm990_camera_free_bus,
-		.module_name		= "mt9v022",
 	}, {
 		.bus_id			= 0, /* Must match with the camera ID */
 		.board_info		= &pcm990_camera_i2c[1],
@@ -461,7 +460,6 @@ static struct soc_camera_link iclink[] = {
 		.query_bus_param	= pcm990_camera_query_bus_param,
 		.set_bus_param		= pcm990_camera_set_bus_param,
 		.free_bus		= pcm990_camera_free_bus,
-		.module_name		= "mt9m001",
 	},
 };
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f4abdaafdac4..93a191c889df 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -43,7 +43,6 @@
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
-#include <mach/sharpsl.h>
 #include <mach/pxa2xx_spi.h>
 #include <plat/i2c.h>
 
@@ -53,7 +52,6 @@
 
 #include "generic.h"
 #include "devices.h"
-#include "sharpsl.h"
 
 static unsigned long poodle_pin_config[] __initdata = {
 	/* I/O */
@@ -463,15 +461,13 @@ static void __init fixup_poodle(struct machine_desc *desc,
 	sharpsl_save_param();
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	mi->bank[0].size = (32*1024*1024);
 }
 
 MACHINE_START(POODLE, "SHARP Poodle")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup		= fixup_poodle,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= poodle_init,
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 0b9ad30bfd51..de53f2e4aa39 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -322,6 +322,7 @@ void __init pxa26x_init_irq(void)
 
 static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_udc,
+	&pxa_device_pmu,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa25x_device_ssp,
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index c059dac02b61..d1fbf29d561c 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -383,7 +383,12 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
+	&pxa_device_pmu,
 	&pxa_device_i2s,
+	&pxa_device_asoc_ssp1,
+	&pxa_device_asoc_ssp2,
+	&pxa_device_asoc_ssp3,
+	&pxa_device_asoc_platform,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
 	&pxa27x_device_ssp1,
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
new file mode 100644
index 000000000000..ce7168b233e2
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -0,0 +1,400 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
+ *
+ * code specific to pxa3xx aka Monahans
+ *
+ * Copyright (C) 2010 CompuLab Ltd.
+ *
+ * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
+ *             initial version: pxa310 USB Host mode support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-u2d.h>
+#include <mach/pxa3xx-u2d.h>
+
+struct pxa3xx_u2d_ulpi {
+	struct clk		*clk;
+	void __iomem		*mmio_base;
+
+	struct otg_transceiver	*otg;
+	unsigned int		ulpi_mode;
+};
+
+static struct pxa3xx_u2d_ulpi *u2d;
+
+static inline u32 u2d_readl(u32 reg)
+{
+	return __raw_readl(u2d->mmio_base + reg);
+}
+
+static inline void u2d_writel(u32 reg, u32 val)
+{
+	__raw_writel(val, u2d->mmio_base + reg);
+}
+
+#if defined(CONFIG_PXA310_ULPI)
+enum u2d_ulpi_phy_mode {
+	SYNCH		= 0,
+	CARKIT		= (1 << 0),
+	SER_3PIN	= (1 << 1),
+	SER_6PIN	= (1 << 2),
+	LOWPOWER	= (1 << 3),
+};
+
+static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
+{
+	return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
+}
+
+static int pxa310_ulpi_poll(void)
+{
+	int timeout = 50000;
+
+	while (timeout--) {
+		if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
+			return 0;
+
+		cpu_relax();
+	}
+
+	pr_warning("%s: ULPI access timed out!\n", __func__);
+
+	return -ETIMEDOUT;
+}
+
+static int pxa310_ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+	int err;
+
+	if (pxa310_ulpi_get_phymode() != SYNCH) {
+		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+		return -EBUSY;
+	}
+
+	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
+	msleep(5);
+
+	err = pxa310_ulpi_poll();
+	if (err)
+		return err;
+
+	return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
+}
+
+static int pxa310_ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+	if (pxa310_ulpi_get_phymode() != SYNCH) {
+		pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+		return -EBUSY;
+	}
+
+	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
+	msleep(5);
+
+	return pxa310_ulpi_poll();
+}
+
+struct otg_io_access_ops pxa310_ulpi_access_ops = {
+	.read	= pxa310_ulpi_read,
+	.write	= pxa310_ulpi_write,
+};
+
+static void pxa310_otg_transceiver_rtsm(void)
+{
+	u32 u2dotgcr;
+
+	/* put PHY to sync mode */
+	u2dotgcr = u2d_readl(U2DOTGCR);
+	u2dotgcr |=  U2DOTGCR_RTSM | U2DOTGCR_UTMID;
+	u2d_writel(U2DOTGCR, u2dotgcr);
+	msleep(10);
+
+	/* setup OTG sync mode */
+	u2dotgcr = u2d_readl(U2DOTGCR);
+	u2dotgcr |= U2DOTGCR_ULAF;
+	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
+	u2d_writel(U2DOTGCR, u2dotgcr);
+}
+
+static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
+{
+	int err;
+
+	pxa310_otg_transceiver_rtsm();
+
+	err = otg_init(u2d->otg);
+	if (err) {
+		pr_err("OTG transceiver init failed");
+		return err;
+	}
+
+	err = otg_set_vbus(u2d->otg, 1);
+	if (err) {
+		pr_err("OTG transceiver VBUS set failed");
+		return err;
+	}
+
+	err = otg_set_host(u2d->otg, host);
+	if (err)
+		pr_err("OTG transceiver Host mode set failed");
+
+	return err;
+}
+
+static int pxa310_start_otg_hc(struct usb_bus *host)
+{
+	u32 u2dotgcr;
+	int err;
+
+	/* disable USB device controller */
+	u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
+	u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
+	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
+
+	err = pxa310_start_otg_host_transcvr(host);
+	if (err)
+		return err;
+
+	/* set xceiver mode */
+	if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
+		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
+	else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
+		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
+
+	/* start OTG host controller */
+	u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
+	u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
+
+	return 0;
+}
+
+static void pxa310_stop_otg_hc(void)
+{
+	pxa310_otg_transceiver_rtsm();
+
+	otg_set_host(u2d->otg, NULL);
+	otg_set_vbus(u2d->otg, 0);
+	otg_shutdown(u2d->otg);
+}
+
+static void pxa310_u2d_setup_otg_hc(void)
+{
+	u32 u2dotgcr;
+
+	u2dotgcr = u2d_readl(U2DOTGCR);
+	u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
+	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
+	u2d_writel(U2DOTGCR, u2dotgcr);
+	msleep(5);
+	u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
+	msleep(5);
+	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
+}
+
+static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
+{
+	unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
+
+	if (pdata) {
+		if (pdata->ulpi_mode & ULPI_SER_6PIN)
+			ulpi_mode |= ULPI_IC_6PIN_SERIAL;
+		else if (pdata->ulpi_mode & ULPI_SER_3PIN)
+			ulpi_mode |= ULPI_IC_3PIN_SERIAL;
+	}
+
+	u2d->ulpi_mode = ulpi_mode;
+
+	u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
+	if (!u2d->otg)
+		return -ENOMEM;
+
+	u2d->otg->io_priv = u2d->mmio_base;
+
+	return 0;
+}
+
+static void pxa310_otg_exit(void)
+{
+	kfree(u2d->otg);
+}
+#else
+static inline void pxa310_u2d_setup_otg_hc(void) {}
+static inline int pxa310_start_otg_hc(struct usb_bus *host)
+{
+	return 0;
+}
+static inline void pxa310_stop_otg_hc(void) {}
+static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
+{
+	return 0;
+}
+static inline void pxa310_otg_exit(void) {}
+#endif /* CONFIG_PXA310_ULPI */
+
+int pxa3xx_u2d_start_hc(struct usb_bus *host)
+{
+	int err = 0;
+
+	/* In case the PXA3xx ULPI isn't used, do nothing. */
+	if (!u2d)
+		return 0;
+
+	clk_enable(u2d->clk);
+
+	if (cpu_is_pxa310()) {
+		pxa310_u2d_setup_otg_hc();
+		err = pxa310_start_otg_hc(host);
+	}
+
+	return err;
+}
+
+void pxa3xx_u2d_stop_hc(struct usb_bus *host)
+{
+	/* In case the PXA3xx ULPI isn't used, do nothing. */
+	if (!u2d)
+		return;
+
+	if (cpu_is_pxa310())
+		pxa310_stop_otg_hc();
+
+	clk_disable(u2d->clk);
+}
+
+static int pxa3xx_u2d_probe(struct platform_device *pdev)
+{
+	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *r;
+	int err;
+
+	u2d = kzalloc(sizeof(struct pxa3xx_u2d_ulpi), GFP_KERNEL);
+	if (!u2d) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	u2d->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(u2d->clk)) {
+		dev_err(&pdev->dev, "failed to get u2d clock\n");
+		err = PTR_ERR(u2d->clk);
+		goto err_free_mem;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "no IO memory resource defined\n");
+		err = -ENODEV;
+		goto err_put_clk;
+	}
+
+        r = request_mem_region(r->start, resource_size(r), pdev->name);
+        if (!r) {
+                dev_err(&pdev->dev, "failed to request memory resource\n");
+                err = -EBUSY;
+                goto err_put_clk;
+        }
+
+	u2d->mmio_base = ioremap(r->start, resource_size(r));
+	if (!u2d->mmio_base) {
+		dev_err(&pdev->dev, "ioremap() failed\n");
+		err = -ENODEV;
+		goto err_free_res;
+	}
+
+	if (pdata->init) {
+		err = pdata->init(&pdev->dev);
+		if (err)
+			goto err_free_io;
+	}
+
+	/* Only PXA310 U2D has OTG functionality */
+	if (cpu_is_pxa310()) {
+		err = pxa310_otg_init(pdata);
+		if (err)
+			goto err_free_plat;
+	}
+
+	platform_set_drvdata(pdev, &u2d);
+
+	return 0;
+
+err_free_plat:
+	if (pdata->exit)
+		pdata->exit(&pdev->dev);
+err_free_io:
+	iounmap(u2d->mmio_base);
+err_free_res:
+	release_mem_region(r->start, resource_size(r));
+err_put_clk:
+	clk_put(u2d->clk);
+err_free_mem:
+	kfree(u2d);
+	return err;
+}
+
+static int pxa3xx_u2d_remove(struct platform_device *pdev)
+{
+	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *r;
+
+	if (cpu_is_pxa310()) {
+		pxa310_stop_otg_hc();
+		pxa310_otg_exit();
+	}
+
+	if (pdata->exit)
+		pdata->exit(&pdev->dev);
+
+	platform_set_drvdata(pdev, NULL);
+	iounmap(u2d->mmio_base);
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, resource_size(r));
+
+	clk_put(u2d->clk);
+
+	kfree(u2d);
+
+	return 0;
+}
+
+static struct platform_driver pxa3xx_u2d_ulpi_driver = {
+        .driver		= {
+                .name   = "pxa3xx-u2d",
+		.owner	= THIS_MODULE,
+        },
+        .probe          = pxa3xx_u2d_probe,
+        .remove         = pxa3xx_u2d_remove,
+};
+
+static int pxa3xx_u2d_ulpi_init(void)
+{
+	return platform_driver_register(&pxa3xx_u2d_ulpi_driver);
+}
+module_init(pxa3xx_u2d_ulpi_init);
+
+static void __exit pxa3xx_u2d_ulpi_exit(void)
+{
+	platform_driver_unregister(&pxa3xx_u2d_ulpi_driver);
+}
+module_exit(pxa3xx_u2d_ulpi_exit);
+
+MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
+MODULE_AUTHOR("Igor Grinberg");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index f544e58e1536..d1c747cdacf8 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -52,7 +52,7 @@
 static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
 
 /* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 0 };
+static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
 
 /*
  * Get the clock frequency as reflected by CCSR and the turbo flag.
@@ -98,23 +98,6 @@ unsigned int pxa3xx_get_clk_frequency_khz(int info)
 	return CLK / 1000;
 }
 
-/*
- * Return the current static memory controller clock frequency
- * in units of 10kHz
- */
-unsigned int pxa3xx_get_memclk_frequency_10khz(void)
-{
-	unsigned long acsr;
-	unsigned int smcfs, clk = 0;
-
-	acsr = ACSR;
-
-	smcfs = (acsr >> 23) & 0x7;
-	clk = (acsr & ACCR_D0CS) ? RO_CLK : smcfs_mult[smcfs] * BASE_CLK;
-
-	return (clk / 10000);
-}
-
 void pxa3xx_clear_reset_status(unsigned int mask)
 {
 	/* RESET_STATUS_* has a 1:1 mapping with ARSR */
@@ -265,7 +248,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
 	INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
-	INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"),
+	INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL),
 	INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
@@ -552,11 +535,23 @@ static void pxa_unmask_ext_wakeup(unsigned int irq)
 	PECR |= PECR_IE(irq - IRQ_WAKEUP0);
 }
 
+static int pxa_set_ext_wakeup_type(unsigned int irq, unsigned int flow_type)
+{
+	if (flow_type & IRQ_TYPE_EDGE_RISING)
+		PWER |= 1 << (irq - IRQ_WAKEUP0);
+
+	if (flow_type & IRQ_TYPE_EDGE_FALLING)
+		PWER |= 1 << (irq - IRQ_WAKEUP0 + 2);
+
+	return 0;
+}
+
 static struct irq_chip pxa_ext_wakeup_chip = {
 	.name		= "WAKEUP",
 	.ack		= pxa_ack_ext_wakeup,
 	.mask		= pxa_mask_ext_wakeup,
 	.unmask		= pxa_unmask_ext_wakeup,
+	.set_type	= pxa_set_ext_wakeup_type,
 };
 
 static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
@@ -596,7 +591,13 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
+	&pxa_device_pmu,
 	&pxa_device_i2s,
+	&pxa_device_asoc_ssp1,
+	&pxa_device_asoc_ssp2,
+	&pxa_device_asoc_ssp3,
+	&pxa_device_asoc_ssp4,
+	&pxa_device_asoc_platform,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
 	&pxa27x_device_ssp1,
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 064292008288..7d29dd3af79d 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -192,7 +192,7 @@ static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
 
 static int __init pxa930_init(void)
 {
-	if (cpu_is_pxa930() || cpu_is_pxa935()) {
+	if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa930_mfp_addr_map);
 	}
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index d4b61b3f08f3..4121d03ea2c3 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -745,13 +745,32 @@ static int raumfeld_is_usb_online(void)
 
 static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
 
+static void raumfeld_power_signal_charged(void)
+{
+	struct power_supply *psy =
+		power_supply_get_by_name(raumfeld_power_supplicants[0]);
+
+	if (psy)
+		power_supply_set_battery_charged(psy);
+}
+
+static int raumfeld_power_resume(void)
+{
+	/* check if GPIO_CHARGE_DONE went low while we were sleeping */
+	if (!gpio_get_value(GPIO_CHARGE_DONE))
+		raumfeld_power_signal_charged();
+
+	return 0;
+}
+
 static struct pda_power_pdata power_supply_info = {
 	.init			= power_supply_init,
 	.is_ac_online		= raumfeld_is_ac_online,
 	.is_usb_online		= raumfeld_is_usb_online,
 	.exit			= power_supply_exit,
 	.supplied_to		= raumfeld_power_supplicants,
-	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants)
+	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants),
+	.resume			= raumfeld_power_resume,
 };
 
 static struct resource power_supply_resources[] = {
@@ -766,13 +785,7 @@ static struct resource power_supply_resources[] = {
 
 static irqreturn_t charge_done_irq(int irq, void *dev_id)
 {
-	struct power_supply *psy;
-
-	psy = power_supply_get_by_name("ds2760-battery.0");
-
-	if (psy)
-		power_supply_set_battery_charged(psy);
-
+	raumfeld_power_signal_charged();
 	return IRQ_HANDLED;
 }
 
@@ -1070,8 +1083,6 @@ static void __init raumfeld_speaker_init(void)
 
 #ifdef CONFIG_MACH_RAUMFELD_RC
 MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_controller_init,
 	.map_io		= pxa_map_io,
@@ -1082,8 +1093,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
 MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_connector_init,
 	.map_io		= pxa_map_io,
@@ -1094,8 +1103,6 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_RAUMFELD_SPEAKER
 MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_speaker_init,
 	.map_io		= pxa_map_io,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 115b6f234bdd..4b521e045d75 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -596,9 +596,7 @@ static void __init saar_init(void)
 
 MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.phys_io        = 0x40000000,
 	.boot_params    = 0xa0000100,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
deleted file mode 100644
index 0cc1203c5bef..000000000000
--- a/arch/arm/mach-pxa/sharpsl.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <mach/sharpsl_pm.h>
-
-/*
- * SharpSL Battery/PM Driver
- */
-#define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
-
-/* MAX1111 Channel Definitions */
-#define MAX1111_BATT_VOLT   4u
-#define MAX1111_BATT_TEMP   2u
-#define MAX1111_ACIN_VOLT   6u
-
-extern struct battery_thresh sharpsl_battery_levels_acin[];
-extern struct battery_thresh sharpsl_battery_levels_noac[];
-int sharpsl_pm_pxa_read_max1111(int channel);
-
-
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index cb4767251f3c..8fed027b12dc 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -29,11 +29,8 @@
 #include <mach/pm.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/regs-rtc.h>
-#include <mach/sharpsl.h>
 #include <mach/sharpsl_pm.h>
 
-#include "sharpsl.h"
-
 /*
  * Constants
  */
@@ -180,17 +177,12 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 	if (machine_is_tosa())
 	    return 0;
 
-#ifdef CONFIG_CORGI_SSP_DEPRECATED
-	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
-			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
-#else
 	extern int max1111_read_channel(int);
 
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */
 	return max1111_read_channel(channel >> 1);
-#endif
 }
 
 static int get_percentage(int voltage)
@@ -277,21 +269,6 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 	dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage,
 			sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies);
 
-#ifdef CONFIG_BACKLIGHT_CORGI
-	/* If battery is low. limit backlight intensity to save power. */
-	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-	    && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
-	    || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
-		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
-			sharpsl_pm.machinfo->backlight_limit(1);
-			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
-		}
-	} else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) {
-		sharpsl_pm.machinfo->backlight_limit(0);
-		sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT;
-	}
-#endif
-
 	/* Suspend if critical battery level */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
 	     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 2ed95f369cfc..52c30b01a671 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -339,10 +339,6 @@ ENTRY(pxa_cpu_resume)
 	mcr	p15, 0, r1, c8, c7, 0   	@ invalidate I & D TLBs
 	mcr	p15, 0, r1, c7, c7, 0		@ invalidate I & D caches, BTB
 
-#ifdef CONFIG_XSCALE_CACHE_ERRATA
-	bic     r9, r9, #0x0004			@ see cpu_xscale_proc_init
-#endif
-
 	mcr	p14, 0, r3, c6, c0, 0		@ clock configuration, turbo mode.
 	mcr	p15, 0, r4, c15, c1, 0		@ CP access reg
 	mcr	p15, 0, r5, c13, c0, 0		@ PID
@@ -368,9 +364,6 @@ sleep_save_sp:
 
 	.text
 resume_after_mmu:
-#ifdef CONFIG_XSCALE_CACHE_ERRATA
-	bl	cpu_xscale_proc_init
-#endif
 	ldmfd	sp!, {r2, r3}
 #ifndef CONFIG_IWMMXT
 	mar	acc0, r2, r3
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index c1048a35f187..f736119f1ebf 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -18,14 +18,15 @@
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
+#include <linux/mtd/physmap.h>
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -33,22 +34,25 @@
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
 
-
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
-#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxafb.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
+#include <mach/sharpsl_pm.h>
+
+#include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
-#include "sharpsl.h"
 
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
 static unsigned long spitz_pin_config[] __initdata = {
 	/* Chip Selects */
 	GPIO78_nCS_2,	/* SCOOP #2 */
@@ -124,10 +128,13 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_FALL,	/* SPITZ_GPIO_RESET */
 };
 
-/*
- * Spitz SCOOP Device #1
- */
-static struct resource spitz_scoop_resources[] = {
+
+/******************************************************************************
+ * Scoop GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
+/* SCOOP Device #1 */
+static struct resource spitz_scoop_1_resources[] = {
 	[0] = {
 		.start		= 0x10800000,
 		.end		= 0x10800fff,
@@ -135,7 +142,7 @@ static struct resource spitz_scoop_resources[] = {
 	},
 };
 
-static struct scoop_config spitz_scoop_setup = {
+static struct scoop_config spitz_scoop_1_setup = {
 	.io_dir		= SPITZ_SCP_IO_DIR,
 	.io_out		= SPITZ_SCP_IO_OUT,
 	.suspend_clr	= SPITZ_SCP_SUS_CLR,
@@ -143,20 +150,18 @@ static struct scoop_config spitz_scoop_setup = {
 	.gpio_base	= SPITZ_SCP_GPIO_BASE,
 };
 
-struct platform_device spitzscoop_device = {
+struct platform_device spitz_scoop_1_device = {
 	.name		= "sharp-scoop",
 	.id		= 0,
 	.dev		= {
- 		.platform_data	= &spitz_scoop_setup,
+		.platform_data	= &spitz_scoop_1_setup,
 	},
-	.num_resources	= ARRAY_SIZE(spitz_scoop_resources),
-	.resource	= spitz_scoop_resources,
+	.num_resources	= ARRAY_SIZE(spitz_scoop_1_resources),
+	.resource	= spitz_scoop_1_resources,
 };
 
-/*
- * Spitz SCOOP Device #2
- */
-static struct resource spitz_scoop2_resources[] = {
+/* SCOOP Device #2 */
+static struct resource spitz_scoop_2_resources[] = {
 	[0] = {
 		.start		= 0x08800040,
 		.end		= 0x08800fff,
@@ -164,7 +169,7 @@ static struct resource spitz_scoop2_resources[] = {
 	},
 };
 
-static struct scoop_config spitz_scoop2_setup = {
+static struct scoop_config spitz_scoop_2_setup = {
 	.io_dir		= SPITZ_SCP2_IO_DIR,
 	.io_out		= SPITZ_SCP2_IO_OUT,
 	.suspend_clr	= SPITZ_SCP2_SUS_CLR,
@@ -172,82 +177,110 @@ static struct scoop_config spitz_scoop2_setup = {
 	.gpio_base	= SPITZ_SCP2_GPIO_BASE,
 };
 
-struct platform_device spitzscoop2_device = {
+struct platform_device spitz_scoop_2_device = {
 	.name		= "sharp-scoop",
 	.id		= 1,
 	.dev		= {
- 		.platform_data	= &spitz_scoop2_setup,
+		.platform_data	= &spitz_scoop_2_setup,
 	},
-	.num_resources	= ARRAY_SIZE(spitz_scoop2_resources),
-	.resource	= spitz_scoop2_resources,
+	.num_resources	= ARRAY_SIZE(spitz_scoop_2_resources),
+	.resource	= spitz_scoop_2_resources,
 };
 
-#define SPITZ_PWR_SD 0x01
-#define SPITZ_PWR_CF 0x02
+static void __init spitz_scoop_init(void)
+{
+	platform_device_register(&spitz_scoop_1_device);
+
+	/* Akita doesn't have the second SCOOP chip */
+	if (!machine_is_akita())
+		platform_device_register(&spitz_scoop_2_device);
+}
 
 /* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
+static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
 {
-	unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
+	unsigned short cpr;
+	unsigned long flags;
 
-	if (new_cpr & 0x0007) {
+	if (new_cpr & 0x7) {
 		gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
-		if (!(cpr & 0x0002) && !(cpr & 0x0004))
-		        mdelay(5);
-		if (device == SPITZ_PWR_CF)
-		        cpr |= 0x0002;
-		if (device == SPITZ_PWR_SD)
-		        cpr |= 0x0004;
-	        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
-	} else {
-		if (device == SPITZ_PWR_CF)
-		        cpr &= ~0x0002;
-		if (device == SPITZ_PWR_SD)
-		        cpr &= ~0x0004;
-		if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
-			write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
-		        mdelay(1);
-			gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
-		} else {
-		        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
-		}
+		mdelay(5);
+	}
+
+	local_irq_save(flags);
+
+	cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR);
+
+	if (enable & new_cpr)
+		cpr |= new_cpr;
+	else
+		cpr &= ~enable;
+
+	write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr);
+
+	local_irq_restore(flags);
+
+	if (!(cpr & 0x7)) {
+		mdelay(1);
+		gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
 	}
 }
 
-static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
+#else
+static inline void spitz_scoop_init(void) {}
+static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {}
+#endif
+
+/******************************************************************************
+ * PCMCIA
+ ******************************************************************************/
+#if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
+static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
 {
 	/* Only need to override behaviour for slot 0 */
 	if (nr == 0)
-		spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
+		spitz_card_pwr_ctrl(
+			cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr);
 	else
 		write_scoop_reg(scoop, SCOOP_CPR, cpr);
 }
 
 static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
-{
-	.dev        = &spitzscoop_device.dev,
-	.irq        = SPITZ_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = SPITZ_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},{
-	.dev        = &spitzscoop2_device.dev,
-	.irq        = SPITZ_IRQ_GPIO_CF2_IRQ,
-	.cd_irq     = -1,
-},
+	{
+		.dev		= &spitz_scoop_1_device.dev,
+		.irq		= SPITZ_IRQ_GPIO_CF_IRQ,
+		.cd_irq		= SPITZ_IRQ_GPIO_CF_CD,
+		.cd_irq_str	= "PCMCIA0 CD",
+	}, {
+		.dev		= &spitz_scoop_2_device.dev,
+		.irq		= SPITZ_IRQ_GPIO_CF2_IRQ,
+		.cd_irq		= -1,
+	},
 };
 
 static struct scoop_pcmcia_config spitz_pcmcia_config = {
-	.devs         = &spitz_pcmcia_scoop[0],
-	.num_devs     = 2,
-	.power_ctrl   = spitz_pcmcia_pwr,
+	.devs		= &spitz_pcmcia_scoop[0],
+	.num_devs	= 2,
+	.power_ctrl	= spitz_pcmcia_pwr,
 };
 
-EXPORT_SYMBOL(spitzscoop_device);
-EXPORT_SYMBOL(spitzscoop2_device);
+static void __init spitz_pcmcia_init(void)
+{
+	/* Akita has only one PCMCIA slot used */
+	if (machine_is_akita())
+		spitz_pcmcia_config.num_devs = 1;
+
+	platform_scoop_config = &spitz_pcmcia_config;
+}
+#else
+static inline void spitz_pcmcia_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
 
-/*
- * Spitz Keyboard Device
- */
 #define SPITZ_KEY_CALENDAR	KEY_F1
 #define SPITZ_KEY_ADDRESS	KEY_F2
 #define SPITZ_KEY_FN		KEY_F3
@@ -263,7 +296,7 @@ EXPORT_SYMBOL(spitzscoop2_device);
 #define SPITZ_KEY_OK		KEY_F11
 #define SPITZ_KEY_MENU		KEY_F12
 
-static const uint32_t spitzkbd_keymap[] = {
+static const uint32_t spitz_keymap[] = {
 	KEY(0, 0, KEY_LEFTCTRL),
 	KEY(0, 1, KEY_1),
 	KEY(0, 2, KEY_3),
@@ -330,36 +363,47 @@ static const uint32_t spitzkbd_keymap[] = {
 	KEY(6, 8, KEY_RIGHT),
 };
 
-static const struct matrix_keymap_data spitzkbd_keymap_data = {
-	.keymap		= spitzkbd_keymap,
-	.keymap_size	= ARRAY_SIZE(spitzkbd_keymap),
+static const struct matrix_keymap_data spitz_keymap_data = {
+	.keymap		= spitz_keymap,
+	.keymap_size	= ARRAY_SIZE(spitz_keymap),
 };
 
-static const uint32_t spitzkbd_row_gpios[] =
+static const uint32_t spitz_row_gpios[] =
 		{ 12, 17, 91, 34, 36, 38, 39 };
-static const uint32_t spitzkbd_col_gpios[] =
+static const uint32_t spitz_col_gpios[] =
 		{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
 
-static struct matrix_keypad_platform_data spitzkbd_pdata = {
-	.keymap_data		= &spitzkbd_keymap_data,
-	.row_gpios		= spitzkbd_row_gpios,
-	.col_gpios		= spitzkbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(spitzkbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(spitzkbd_col_gpios),
+static struct matrix_keypad_platform_data spitz_mkp_pdata = {
+	.keymap_data		= &spitz_keymap_data,
+	.row_gpios		= spitz_row_gpios,
+	.col_gpios		= spitz_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(spitz_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(spitz_col_gpios),
 	.col_scan_delay_us	= 10,
 	.debounce_ms		= 10,
 	.wakeup			= 1,
 };
 
-static struct platform_device spitzkbd_device = {
+static struct platform_device spitz_mkp_device = {
 	.name		= "matrix-keypad",
 	.id		= -1,
 	.dev		= {
-		.platform_data = &spitzkbd_pdata,
+		.platform_data	= &spitz_mkp_pdata,
 	},
 };
 
+static void __init spitz_mkp_init(void)
+{
+	platform_device_register(&spitz_mkp_device);
+}
+#else
+static inline void spitz_mkp_init(void) {}
+#endif
 
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button spitz_gpio_keys[] = {
 	{
 		.type	= EV_PWR,
@@ -396,10 +440,18 @@ static struct platform_device spitz_gpio_keys_device = {
 	},
 };
 
+static void __init spitz_keys_init(void)
+{
+	platform_device_register(&spitz_gpio_keys_device);
+}
+#else
+static inline void spitz_keys_init(void) {}
+#endif
 
-/*
- * Spitz LEDs
- */
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led spitz_gpio_leds[] = {
 	{
 		.name			= "spitz:amber:charge",
@@ -418,20 +470,27 @@ static struct gpio_led_platform_data spitz_gpio_leds_info = {
 	.num_leds	= ARRAY_SIZE(spitz_gpio_leds),
 };
 
-static struct platform_device spitzled_device = {
+static struct platform_device spitz_led_device = {
 	.name		= "leds-gpio",
 	.id		= -1,
 	.dev		= {
-		.platform_data = &spitz_gpio_leds_info,
+		.platform_data	= &spitz_gpio_leds_info,
 	},
 };
 
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_master spitz_spi_info = {
-	.num_chipselect	= 3,
-};
+static void __init spitz_leds_init(void)
+{
+	platform_device_register(&spitz_led_device);
+}
+#else
+static inline void spitz_leds_init(void) {}
+#endif
 
-static void spitz_wait_for_hsync(void)
+/******************************************************************************
+ * SSP Devices
+ ******************************************************************************/
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static void spitz_ads7846_wait_for_hsync(void)
 {
 	while (gpio_get_value(SPITZ_GPIO_HSYNC))
 		cpu_relax();
@@ -447,7 +506,7 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.y_plate_ohms		= 486,
 	.pressure_max		= 1024,
 	.gpio_pendown		= SPITZ_GPIO_TP_INT,
-	.wait_for_sync		= spitz_wait_for_hsync,
+	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
 };
 
 static struct pxa2xx_spi_chip spitz_ads7846_chip = {
@@ -485,72 +544,88 @@ static struct pxa2xx_spi_chip spitz_max1111_chip = {
 
 static struct spi_board_info spitz_spi_devices[] = {
 	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 1200000,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.platform_data	= &spitz_ads7846_info,
-		.controller_data= &spitz_ads7846_chip,
-		.irq		= gpio_to_irq(SPITZ_GPIO_TP_INT),
+		.modalias		= "ads7846",
+		.max_speed_hz		= 1200000,
+		.bus_num		= 2,
+		.chip_select		= 0,
+		.platform_data		= &spitz_ads7846_info,
+		.controller_data	= &spitz_ads7846_chip,
+		.irq			= gpio_to_irq(SPITZ_GPIO_TP_INT),
 	}, {
-		.modalias	= "corgi-lcd",
-		.max_speed_hz	= 50000,
-		.bus_num	= 2,
-		.chip_select	= 1,
-		.platform_data	= &spitz_lcdcon_info,
-		.controller_data= &spitz_lcdcon_chip,
+		.modalias		= "corgi-lcd",
+		.max_speed_hz		= 50000,
+		.bus_num		= 2,
+		.chip_select		= 1,
+		.platform_data		= &spitz_lcdcon_info,
+		.controller_data	= &spitz_lcdcon_chip,
 	}, {
-		.modalias	= "max1111",
-		.max_speed_hz	= 450000,
-		.bus_num	= 2,
-		.chip_select	= 2,
-		.controller_data= &spitz_max1111_chip,
+		.modalias		= "max1111",
+		.max_speed_hz		= 450000,
+		.bus_num		= 2,
+		.chip_select		= 2,
+		.controller_data	= &spitz_max1111_chip,
 	},
 };
 
-static void __init spitz_init_spi(void)
+static struct pxa2xx_spi_master spitz_spi_info = {
+	.num_chipselect	= 3,
+};
+
+static void __init spitz_spi_init(void)
 {
+	struct corgi_lcd_platform_data *lcd_data = &spitz_lcdcon_info;
+
 	if (machine_is_akita()) {
-		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
-		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+		lcd_data->gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+		lcd_data->gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
 	}
 
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 }
 #else
-static inline void spitz_init_spi(void) {}
+static inline void spitz_spi_init(void) {}
 #endif
 
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 /*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
+ * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
+ * give the card a chance to fully insert/eject.
  */
 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask)
-		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
+	if ((1 << vdd) & p_d->ocr_mask)
+		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
 	else
-		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
+		spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
 	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.setpower 		= spitz_mci_setpower,
+	.setpower		= spitz_mci_setpower,
 	.gpio_card_detect	= SPITZ_GPIO_nSD_DETECT,
 	.gpio_card_ro		= SPITZ_GPIO_nSD_WP,
 	.gpio_power		= -1,
 };
 
+static void __init spitz_mmc_init(void)
+{
+	pxa_set_mci_info(&spitz_mci_platform_data);
+}
+#else
+static inline void spitz_mmc_init(void) {}
+#endif
 
-/*
- * USB Host (OHCI)
- */
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int spitz_ohci_init(struct device *dev)
 {
 	int err;
@@ -559,9 +634,7 @@ static int spitz_ohci_init(struct device *dev)
 	if (err)
 		return err;
 
-	/* Only Port 2 is connected
-	 * Setup USB Port 2 Output Control Register
-	 */
+	/* Only Port 2 is connected, setup USB Port 2 Output Control Register */
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 
 	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
@@ -580,67 +653,95 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.power_budget	= 150,
 };
 
+static void __init spitz_uhc_init(void)
+{
+	pxa_set_ohci_info(&spitz_ohci_platform_data);
+}
+#else
+static inline void spitz_uhc_init(void) {}
+#endif
 
-/*
- * Irda
- */
-
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
-/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
+static void __init spitz_irda_init(void)
+{
+	if (machine_is_akita())
+		spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
+	else
+		spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
 
-/*
- * Spitz PXA Framebuffer
- */
+	pxa_set_ficp_info(&spitz_ficp_platform_data);
+}
+#else
+static inline void spitz_irda_init(void) {}
+#endif
 
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info spitz_pxafb_modes[] = {
-{
-	.pixclock       = 19231,
-	.xres           = 480,
-	.yres           = 640,
-	.bpp            = 16,
-	.hsync_len      = 40,
-	.left_margin    = 46,
-	.right_margin   = 125,
-	.vsync_len      = 3,
-	.upper_margin   = 1,
-	.lower_margin   = 0,
-	.sync           = 0,
-},{
-	.pixclock       = 134617,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 20,
-	.left_margin    = 20,
-	.right_margin   = 46,
-	.vsync_len      = 2,
-	.upper_margin   = 1,
-	.lower_margin   = 0,
-	.sync           = 0,
-},
+	{
+		.pixclock       = 19231,
+		.xres           = 480,
+		.yres           = 640,
+		.bpp            = 16,
+		.hsync_len      = 40,
+		.left_margin    = 46,
+		.right_margin   = 125,
+		.vsync_len      = 3,
+		.upper_margin   = 1,
+		.lower_margin   = 0,
+		.sync           = 0,
+	}, {
+		.pixclock       = 134617,
+		.xres           = 240,
+		.yres           = 320,
+		.bpp            = 16,
+		.hsync_len      = 20,
+		.left_margin    = 20,
+		.right_margin   = 46,
+		.vsync_len      = 2,
+		.upper_margin   = 1,
+		.lower_margin   = 0,
+		.sync           = 0,
+	},
 };
 
 static struct pxafb_mach_info spitz_pxafb_info = {
-	.modes          = &spitz_pxafb_modes[0],
-	.num_modes      = 2,
+	.modes          = spitz_pxafb_modes,
+	.num_modes      = ARRAY_SIZE(spitz_pxafb_modes),
 	.fixed_modes    = 1,
 	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
 };
 
-static struct mtd_partition sharpsl_nand_partitions[] = {
+static void __init spitz_lcd_init(void)
+{
+	set_pxa_fb_info(&spitz_pxafb_info);
+}
+#else
+static inline void spitz_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
+static struct mtd_partition spitz_nand_partitions[] = {
 	{
 		.name = "System Area",
 		.offset = 0,
 		.size = 7 * 1024 * 1024,
-	},
-	{
+	}, {
 		.name = "Root Filesystem",
 		.offset = 7 * 1024 * 1024,
-	},
-	{
+	}, {
 		.name = "Home Filesystem",
 		.offset = MTDPART_OFS_APPEND,
 		.size = MTDPART_SIZ_FULL,
@@ -649,37 +750,72 @@ static struct mtd_partition sharpsl_nand_partitions[] = {
 
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
+static struct nand_bbt_descr spitz_nand_bbt = {
+	.options	= 0,
+	.offs		= 4,
+	.len		= 2,
+	.pattern	= scan_ff_pattern
+};
+
+static struct nand_ecclayout akita_oobinfo = {
+	.oobfree	= { {0x08, 0x09} },
+	.eccbytes	= 24,
+	.eccpos		= {
+			0x05, 0x01, 0x02, 0x03, 0x06, 0x07, 0x15, 0x11,
+			0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+			0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37,
+	},
 };
 
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.partitions		= sharpsl_nand_partitions,
-	.nr_partitions		= ARRAY_SIZE(sharpsl_nand_partitions),
+static struct sharpsl_nand_platform_data spitz_nand_pdata = {
+	.badblock_pattern	= &spitz_nand_bbt,
+	.partitions		= spitz_nand_partitions,
+	.nr_partitions		= ARRAY_SIZE(spitz_nand_partitions),
 };
 
-static struct resource sharpsl_nand_resources[] = {
+static struct resource spitz_nand_resources[] = {
 	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
+		.start	= PXA_CS3_PHYS,
+		.end	= PXA_CS3_PHYS + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
 
-static struct platform_device sharpsl_nand_device = {
+static struct platform_device spitz_nand_device = {
 	.name		= "sharpsl-nand",
 	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
+	.resource	= spitz_nand_resources,
+	.num_resources	= ARRAY_SIZE(spitz_nand_resources),
+	.dev		= {
+		.platform_data	= &spitz_nand_pdata,
+	}
 };
 
+static void __init spitz_nand_init(void)
+{
+	if (machine_is_spitz()) {
+		spitz_nand_partitions[1].size = 5 * 1024 * 1024;
+	} else if (machine_is_akita()) {
+		spitz_nand_partitions[1].size = 58 * 1024 * 1024;
+		spitz_nand_bbt.len = 1;
+		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+	} else if (machine_is_borzoi()) {
+		spitz_nand_partitions[1].size = 32 * 1024 * 1024;
+		spitz_nand_bbt.len = 1;
+		spitz_nand_pdata.ecc_layout = &akita_oobinfo;
+	}
+
+	platform_device_register(&spitz_nand_device);
+}
+#else
+static inline void spitz_nand_init(void) {}
+#endif
 
-static struct mtd_partition sharpsl_rom_parts[] = {
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition spitz_rom_parts[] = {
 	{
 		.name	="Boot PROM Filesystem",
 		.offset	= 0x00140000,
@@ -687,37 +823,105 @@ static struct mtd_partition sharpsl_rom_parts[] = {
 	},
 };
 
-static struct physmap_flash_data sharpsl_rom_data = {
+static struct physmap_flash_data spitz_rom_data = {
 	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
+	.nr_parts	= ARRAY_SIZE(spitz_rom_parts),
+	.parts		= spitz_rom_parts,
 };
 
-static struct resource sharpsl_rom_resources[] = {
+static struct resource spitz_rom_resources[] = {
 	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
+		.start	= PXA_CS0_PHYS,
+		.end	= PXA_CS0_PHYS + SZ_8M - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
 
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
+static struct platform_device spitz_rom_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= spitz_rom_resources,
+	.num_resources	= ARRAY_SIZE(spitz_rom_resources),
+	.dev		= {
+		.platform_data	= &spitz_rom_data,
+	},
 };
 
-static struct platform_device *devices[] __initdata = {
-	&spitzscoop_device,
-	&spitzkbd_device,
-	&spitz_gpio_keys_device,
-	&spitzled_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
+static void __init spitz_nor_init(void)
+{
+	platform_device_register(&spitz_rom_device);
+}
+#else
+static inline void spitz_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO expander
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pca953x_platform_data akita_pca953x_pdata = {
+	.gpio_base		= AKITA_IOEXP_GPIO_BASE,
 };
 
+static struct i2c_board_info spitz_i2c_devs[] = {
+	{
+		.type		= "wm8750",
+		.addr		= 0x1b,
+	}, {
+		.type		= "max7310",
+		.addr		= 0x18,
+		.platform_data	= &akita_pca953x_pdata,
+	},
+};
+
+static struct regulator_consumer_supply isl6271a_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data isl6271a_info[] = {
+	{
+		.constraints = {
+			.name		= "vcc_core range",
+			.min_uV		= 850000,
+			.max_uV		= 1600000,
+			.always_on	= 1,
+			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		},
+	.consumer_supplies	= isl6271a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(isl6271a_consumers),
+	}
+};
+
+static struct i2c_board_info spitz_pi2c_devs[] = {
+	{
+		.type		= "isl6271a",
+		.addr		= 0x0c,
+		.platform_data	= &isl6271a_info,
+	},
+};
+
+static void __init spitz_i2c_init(void)
+{
+	int size = ARRAY_SIZE(spitz_i2c_devs);
+
+	/* Only Akita has the max7310 chip */
+	if (!machine_is_akita())
+		size--;
+
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(0, spitz_i2c_devs, size);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs));
+}
+#else
+static inline void spitz_i2c_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
 static void spitz_poweroff(void)
 {
 	arm_machine_restart('g', NULL);
@@ -726,26 +930,18 @@ static void spitz_poweroff(void)
 static void spitz_restart(char mode, const char *cmd)
 {
 	/* Bootloader magic for a reboot */
-	if((MSC0 & 0xffff0000) == 0x7ff00000)
+	if ((MSC0 & 0xffff0000) == 0x7ff00000)
 		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
 
 	spitz_poweroff();
 }
 
-static void __init common_init(void)
+static void __init spitz_init(void)
 {
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
-	if (machine_is_spitz()) {
-		sharpsl_nand_partitions[1].size = 5 * 1024 * 1024;
-	} else if (machine_is_akita()) {
-		sharpsl_nand_partitions[1].size = 58 * 1024 * 1024;
-	} else if (machine_is_borzoi()) {
-		sharpsl_nand_partitions[1].size = 32 * 1024 * 1024;
-	}
-
 	PMCR = 0x00;
 
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
@@ -757,105 +953,33 @@ static void __init common_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	spitz_init_spi();
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pxa_set_mci_info(&spitz_mci_platform_data);
-	pxa_set_ohci_info(&spitz_ohci_platform_data);
-	pxa_set_ficp_info(&spitz_ficp_platform_data);
-	set_pxa_fb_info(&spitz_pxafb_info);
-	pxa_set_i2c_info(NULL);
+	spitz_spi_init();
+	spitz_scoop_init();
+	spitz_mkp_init();
+	spitz_keys_init();
+	spitz_leds_init();
+	spitz_mmc_init();
+	spitz_pcmcia_init();
+	spitz_irda_init();
+	spitz_uhc_init();
+	spitz_lcd_init();
+	spitz_nor_init();
+	spitz_nand_init();
+	spitz_i2c_init();
 }
 
-#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI)
-static struct nand_bbt_descr sharpsl_akita_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 1,
-	.pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
-	.eccbytes = 24,
-	.eccpos = {
-		   0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
-		   0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
-		   0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
-	.oobfree = {{0x08, 0x09}}
-};
-#endif
-
-#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void __init spitz_init(void)
-{
-	spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
-#ifdef CONFIG_MACH_BORZOI
-	if (machine_is_borzoi()) {
-		sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
-		sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
-	}
-#endif
-
-	platform_scoop_config = &spitz_pcmcia_config;
-
-	common_init();
-
-	platform_device_register(&spitzscoop2_device);
-}
-#endif
-
-#ifdef CONFIG_MACH_AKITA
-/*
- * Akita IO Expander
- */
-static struct pca953x_platform_data akita_ioexp = {
-	.gpio_base		= AKITA_IOEXP_GPIO_BASE,
-};
-
-static struct i2c_board_info akita_i2c_board_info[] = {
-	{
-		.type		= "max7310",
-		.addr		= 0x18,
-		.platform_data	= &akita_ioexp,
-	}, {
-		.type		= "wm8750",
-		.addr		= 0x1b,
-	},
-};
-
-static void __init akita_init(void)
-{
-	spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
-
-	sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
-	sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
-
-	/* We just pretend the second element of the array doesn't exist */
-	spitz_pcmcia_config.num_devs = 1;
-	platform_scoop_config = &spitz_pcmcia_config;
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
-
-	common_init();
-}
-#endif
-
-static void __init fixup_spitz(struct machine_desc *desc,
+static void __init spitz_fixup(struct machine_desc *desc,
 		struct tag *tags, char **cmdline, struct meminfo *mi)
 {
 	sharpsl_save_param();
 	mi->nr_banks = 1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	mi->bank[0].size = (64*1024*1024);
 }
 
 #ifdef CONFIG_MACH_SPITZ
 MACHINE_START(SPITZ, "SHARP Spitz")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup		= fixup_spitz,
+	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
@@ -865,9 +989,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_BORZOI
 MACHINE_START(BORZOI, "SHARP Borzoi")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup		= fixup_spitz,
+	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
@@ -877,12 +999,10 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_AKITA
 MACHINE_START(AKITA, "SHARP Akita")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.fixup		= fixup_spitz,
+	.fixup		= spitz_fixup,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
-	.init_machine	= akita_init,
+	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 4209ddf6da61..7fe74067d85f 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -22,11 +22,10 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 
-#include <mach/sharpsl.h>
 #include <mach/spitz.h>
 #include <mach/pxa27x.h>
+#include <mach/sharpsl_pm.h>
 
-#include "sharpsl.h"
 #include "generic.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
@@ -178,11 +177,11 @@ unsigned long spitzpm_read_devdata(int type)
 	case SHARPSL_STATUS_ACIN:
 		return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
 	case SHARPSL_STATUS_LOCK:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
 	case SHARPSL_STATUS_CHRGFULL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
 	case SHARPSL_STATUS_FATAL:
-		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
 	case SHARPSL_ACIN_VOLT:
 		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
 	case SHARPSL_BATT_TEMP:
@@ -212,8 +211,6 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.should_wakeup    = spitz_should_wakeup,
 #if defined(CONFIG_LCD_CORGI)
 	.backlight_limit = corgi_lcd_limit_intensity,
-#elif defined(CONFIG_BACKLIGHT_CORGI)
-	.backlight_limit  = corgibl_limit_intensity,
 #endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index af40d2a12d37..738adc1773fd 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -29,6 +29,7 @@
 #include <linux/i2c/at24.h>
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -55,6 +56,8 @@
 #include "devices.h"
 #include "generic.h"
 
+#define STARGATE_NR_IRQS	(IRQ_BOARD_START + 8)
+
 /* Bluetooth */
 #define SG2_BT_RESET		81
 
@@ -62,37 +65,12 @@
 #define SG2_GPIO_nSD_DETECT	90
 #define SG2_SD_POWER_ENABLE	89
 
-static unsigned long stargate2_pin_config[] __initdata = {
-
-	GPIO15_nCS_1, /* SRAM */
-	/* SMC91x */
-	GPIO80_nCS_4,
-	GPIO40_GPIO, /*cable detect?*/
+static unsigned long sg2_im2_unified_pin_config[] __initdata = {
 	/* Device Identification for wakeup*/
 	GPIO102_GPIO,
-
-	/* Button */
-	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
-
 	/* DA9030 */
 	GPIO1_GPIO,
 
-	/* Compact Flash */
-	GPIO79_PSKTSEL,
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO120_GPIO, /* Buff ctrl */
-	GPIO108_GPIO, /* Power ctrl */
-	GPIO82_GPIO, /* Reset */
-	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
-
 	/* MMC */
 	GPIO32_MMC_CLK,
 	GPIO112_MMC_CMD,
@@ -100,49 +78,44 @@ static unsigned long stargate2_pin_config[] __initdata = {
 	GPIO109_MMC_DAT_1,
 	GPIO110_MMC_DAT_2,
 	GPIO111_MMC_DAT_3,
-	GPIO90_GPIO, /* nSD detect */
-	GPIO89_GPIO, /* SD_POWER_ENABLE */
-
-	/* Bluetooth */
-	GPIO81_GPIO, /* reset */
 
-	/* cc2420 802.15.4 radio */
-	GPIO22_GPIO,		/* CC_RSTN  (out)*/
-	GPIO114_GPIO,		/* CC_FIFO (in) */
-	GPIO116_GPIO, 		/* CC_CCA (in) */
-	GPIO0_GPIO,		/* CC_FIFOP (in) */
-	GPIO16_GPIO,		/* CCSFD (in) */
-	GPIO39_GPIO,		/* CSn (out) */
+	/* 802.15.4 radio - driver out of mainline */
+	GPIO22_GPIO,			/* CC_RSTN */
+	GPIO114_GPIO,			/* CC_FIFO */
+	GPIO116_GPIO,			/* CC_CCA */
+	GPIO0_GPIO,			/* CC_FIFOP */
+	GPIO16_GPIO,			/* CCSFD */
+	GPIO115_GPIO,			/* Power enable */
 
 	/* I2C */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
 
 	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO, /* chip select */
+	GPIO39_GPIO,			/* Chip Select */
 	GPIO34_SSP3_SCLK,
 	GPIO35_SSP3_TXD,
 	GPIO41_SSP3_RXD,
 
-	/* SSP 2 */
+	/* SSP 2 to daughter boards */
 	GPIO11_SSP2_RXD,
 	GPIO38_SSP2_TXD,
 	GPIO36_SSP2_SCLK,
 	GPIO37_GPIO, /* chip select */
 
-	/* SSP 1 */
-	GPIO26_SSP1_RXD,
-	GPIO25_SSP1_TXD,
+	/* SSP 1 - to daughter boards */
+	GPIO24_GPIO,			/* Chip Select */
 	GPIO23_SSP1_SCLK,
-	GPIO24_GPIO, /* chip select */
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
 
-	/* BTUART */
+	/* BTUART Basic Connector*/
 	GPIO42_BTUART_RXD,
 	GPIO43_BTUART_TXD,
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS,
 
-	/* STUART */
+	/* STUART  - IM2 via debug board not sure on SG2*/
 	GPIO46_STUART_RXD,
 	GPIO47_STUART_TXD,
 
@@ -150,47 +123,17 @@ static unsigned long stargate2_pin_config[] __initdata = {
 	GPIO96_GPIO,	/* accelerometer interrupt */
 	GPIO99_GPIO,	/* ADC interrupt */
 
-	/* Connector pins specified as gpios */
-	GPIO94_GPIO, /* large basic connector pin 14 */
-	GPIO10_GPIO, /* large basic connector pin 23 */
-
 	/* SHT15 */
 	GPIO100_GPIO,
 	GPIO98_GPIO,
-};
 
-/**
- * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
- **/
-static int stargate2_reset_bluetooth(void)
-{
-	int err;
-	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
-	if (err) {
-		printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
-		return err;
-	}
-	gpio_direction_output(SG2_BT_RESET, 1);
-	mdelay(5);
-	/* now reset it - 5 msec minimum */
-	gpio_set_value(SG2_BT_RESET, 0);
-	mdelay(10);
-	gpio_set_value(SG2_BT_RESET, 1);
-	gpio_free(SG2_BT_RESET);
-	return 0;
-}
+	/* Basic sensor board */
+	GPIO96_GPIO,	/* accelerometer interrupt */
+	GPIO99_GPIO,	/* ADC interrupt */
 
-static struct led_info stargate2_leds[] = {
-	{
-		.name = "sg2:red",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:blue",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:green",
-		.flags = DA9030_LED_RATE_ON,
-	},
+	/* Connector pins specified as gpios */
+	GPIO94_GPIO, /* large basic connector pin 14 */
+	GPIO10_GPIO, /* large basic connector pin 23 */
 };
 
 static struct sht15_platform_data platform_data_sht15 = {
@@ -352,20 +295,184 @@ static struct regulator_init_data stargate2_ldo_init_data[] = {
 	},
 };
 
-static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+static struct mtd_partition stargate2flash_partitions[] = {
 	{
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_2,
-		.platform_data = &stargate2_leds[0],
+		.name = "Bootloader",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = 0,
 	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_3,
-		.platform_data = &stargate2_leds[2],
+		.name = "Kernel",
+		.size = 0x00200000,
+		.offset = 0x00040000,
+		.mask_flags = 0
 	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_4,
-		.platform_data = &stargate2_leds[1],
+		.name = "Filesystem",
+		.size = 0x01DC0000,
+		.offset = 0x00240000,
+		.mask_flags = 0
+	},
+};
+
+static struct resource flash_resources = {
+	.start = PXA_CS0_PHYS,
+	.end = PXA_CS0_PHYS + SZ_32M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct flash_platform_data stargate2_flash_data = {
+	.map_name = "cfi_probe",
+	.parts = stargate2flash_partitions,
+	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
+	.name = "PXA27xOnChipROM",
+	.width = 2,
+};
+
+static struct platform_device stargate2_flash_device = {
+	.name = "pxa2xx-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &stargate2_flash_data,
+	},
+	.resource = &flash_resources,
+	.num_resources = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
+	.num_chipselect = 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
+	.num_chipselect = 1,
+};
+
+/* An upcoming kernel change will scrap SFRM usage so these
+ * drivers have been moved to use gpio's via cs_control */
+static struct pxa2xx_spi_chip staccel_chip_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 24,
+};
+
+static struct pxa2xx_spi_chip cc2420_info = {
+	.tx_threshold = 8,
+	.rx_threshold = 8,
+	.dma_burst_size = 8,
+	.timeout = 235,
+	.gpio_cs = 39,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias = "lis3l02dq",
+		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
+		.bus_num = 1,
+		.chip_select = 0,
+		.controller_data = &staccel_chip_info,
+		.irq = IRQ_GPIO(96),
+	}, {
+		.modalias = "cc2420",
+		.max_speed_hz = 6500000,
+		.bus_num = 3,
+		.chip_select = 0,
+		.controller_data = &cc2420_info,
+	},
+};
+
+static void sg2_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
+		break;
+	}
+}
+
+static struct i2c_pxa_platform_data i2c_pwr_pdata = {
+	.fast_mode = 1,
+};
+
+static struct i2c_pxa_platform_data i2c_pdata = {
+	.fast_mode = 1,
+};
+
+static void __init imote2_stargate2_init(void)
+{
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
+	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
+	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+
+	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
+	pxa_set_i2c_info(&i2c_pdata);
+}
+
+#ifdef CONFIG_MACH_INTELMOTE2
+/* As the the imote2 doesn't currently have a conventional SD slot
+ * there is no option to hotplug cards, making all this rather simple
+ */
+static int imote2_mci_get_ro(struct device *dev)
+{
+	return 0;
+}
+
+/* Rather simple case as hotplugging not possible */
+static struct pxamci_platform_data imote2_mci_platform_data = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
+	.get_ro = imote2_mci_get_ro,
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power = -1,
+};
+
+static struct gpio_led imote2_led_pins[] = {
+	{
+		.name       =  "imote2:red",
+		.gpio       = 103,
+		.active_low = 1,
+	}, {
+		.name       = "imote2:green",
+		.gpio       = 104,
+		.active_low = 1,
 	}, {
+		.name       = "imote2:blue",
+		.gpio       = 105,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data imote2_led_data = {
+	.num_leds = ARRAY_SIZE(imote2_led_pins),
+	.leds     = imote2_led_pins,
+};
+
+static struct platform_device imote2_leds = {
+	.name = "leds-gpio",
+	.id   = -1,
+	.dev = {
+		.platform_data = &imote2_led_data,
+	},
+};
+
+static struct da903x_subdev_info imote2_da9030_subdevs[] = {
+	{
 		.name = "da903x-regulator",
 		.id = DA9030_ID_LDO2,
 		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
@@ -428,9 +535,121 @@ static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
 	},
 };
 
-static struct da903x_platform_data stargate2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
-	.subdevs = stargate2_da9030_subdevs,
+static struct da903x_platform_data imote2_da9030_pdata = {
+	.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
+	.subdevs = imote2_da9030_subdevs,
+};
+
+static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
+	{
+		.type = "da9030",
+		.addr = 0x49,
+		.platform_data = &imote2_da9030_pdata,
+		.irq = gpio_to_irq(1),
+	},
+};
+
+static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
+	{ /* UCAM sensor board */
+		.type = "max1239",
+		.addr = 0x35,
+	}, { /* ITS400 Sensor board only */
+		.type = "max1363",
+		.addr = 0x34,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tsl2561",
+		.addr = 0x49,
+		/* Through a nand gate - Also beware, on V2 sensor board the
+		 * pull up resistors are missing.
+		 */
+		.irq = IRQ_GPIO(99),
+	}, { /* ITS400 Sensor board only */
+		.type = "tmp175",
+		.addr = 0x4A,
+		.irq = IRQ_GPIO(96),
+	}, { /* IMB400 Multimedia board */
+		.type = "wm8940",
+		.addr = 0x1A,
+	},
+};
+
+static unsigned long imote2_pin_config[] __initdata = {
+
+	/* Button */
+	GPIO91_GPIO,
+
+	/* LEDS */
+	GPIO103_GPIO, /* red led */
+	GPIO104_GPIO, /* green led */
+	GPIO105_GPIO, /* blue led */
+};
+
+static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
+	.udc_command		= sg2_udc_command,
+};
+
+static struct platform_device *imote2_devices[] = {
+	&stargate2_flash_device,
+	&imote2_leds,
+	&sht15,
+};
+
+static void __init imote2_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+	imote2_stargate2_init();
+
+	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
+
+	i2c_register_board_info(0, imote2_i2c_board_info,
+				ARRAY_SIZE(imote2_i2c_board_info));
+	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
+				ARRAY_SIZE(imote2_pwr_i2c_board_info));
+
+	pxa_set_mci_info(&imote2_mci_platform_data);
+	pxa_set_udc_info(&imote2_udc_info);
+}
+#endif
+
+#ifdef CONFIG_MACH_STARGATE2
+
+static unsigned long stargate2_pin_config[] __initdata = {
+
+	GPIO15_nCS_1, /* SRAM */
+	/* SMC91x */
+	GPIO80_nCS_4,
+	GPIO40_GPIO, /*cable detect?*/
+
+	/* Button */
+	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
+
+	/* Compact Flash */
+	GPIO79_PSKTSEL,
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO120_GPIO, /* Buff ctrl */
+	GPIO108_GPIO, /* Power ctrl */
+	GPIO82_GPIO, /* Reset */
+	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
+
+	/* MMC not shared with imote2 */
+	GPIO90_GPIO, /* nSD detect */
+	GPIO89_GPIO, /* SD_POWER_ENABLE */
+
+	/* Bluetooth */
+	GPIO81_GPIO, /* reset */
 };
 
 static struct resource smc91x_resources[] = {
@@ -463,7 +682,6 @@ static struct platform_device smc91x_device = {
 };
 
 
-
 /*
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert / eject.
@@ -532,48 +750,6 @@ static struct pxamci_platform_data stargate2_mci_platform_data = {
 	.exit = stargate2_mci_exit,
 };
 
-static struct mtd_partition stargate2flash_partitions[] = {
-	{
-		.name = "Bootloader",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = 0,
-	}, {
-		.name = "Kernel",
-		.size = 0x00200000,
-		.offset = 0x00040000,
-		.mask_flags = 0
-	}, {
-		.name = "Filesystem",
-		.size = 0x01DC0000,
-		.offset = 0x00240000,
-		.mask_flags = 0
-	},
-};
-
-static struct resource flash_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data stargate2_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = stargate2flash_partitions,
-	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
-	.name = "PXA27xOnChipROM",
-	.width = 2,
-};
-
-static struct platform_device stargate2_flash_device = {
-	.name = "pxa2xx-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &stargate2_flash_data,
-	},
-	.resource = &flash_resources,
-	.num_resources = 1,
-};
 
 /*
  * SRAM - The Stargate 2 has 32MB of SRAM.
@@ -616,6 +792,129 @@ static struct at24_platform_data pca9500_eeprom_pdata = {
 	.page_size = 4,
 };
 
+/**
+ * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
+ **/
+static int stargate2_reset_bluetooth(void)
+{
+	int err;
+	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
+	if (err) {
+		printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
+		return err;
+	}
+	gpio_direction_output(SG2_BT_RESET, 1);
+	mdelay(5);
+	/* now reset it - 5 msec minimum */
+	gpio_set_value(SG2_BT_RESET, 0);
+	mdelay(10);
+	gpio_set_value(SG2_BT_RESET, 1);
+	gpio_free(SG2_BT_RESET);
+	return 0;
+}
+
+static struct led_info stargate2_leds[] = {
+	{
+		.name = "sg2:red",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:blue",
+		.flags = DA9030_LED_RATE_ON,
+	}, {
+		.name = "sg2:green",
+		.flags = DA9030_LED_RATE_ON,
+	},
+};
+
+static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
+	{
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_2,
+		.platform_data = &stargate2_leds[0],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_3,
+		.platform_data = &stargate2_leds[2],
+	}, {
+		.name = "da903x-led",
+		.id = DA9030_ID_LED_4,
+		.platform_data = &stargate2_leds[1],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO2,
+		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO3,
+		.platform_data = &stargate2_ldo_init_data[vcc_bb],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO4,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO5,
+		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO6,
+		.platform_data = &stargate2_ldo_init_data[vcc_vref],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO7,
+		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO8,
+		.platform_data = &stargate2_ldo_init_data[vcc_mica],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO9,
+		.platform_data = &stargate2_ldo_init_data[vcc_bt],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO10,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO11,
+		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO12,
+		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO15,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO17,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
+	}, {
+		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
+		.id = DA9030_ID_LDO18,
+		.platform_data = &stargate2_ldo_init_data[vcc_io],
+	}, {
+		.name = "da903x-regulator",
+		.id = DA9030_ID_LDO19,
+		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
+	},
+};
+
+static struct da903x_platform_data stargate2_da9030_pdata = {
+	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
+	.subdevs = stargate2_da9030_subdevs,
+};
+
+static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
+	{
+		.type = "da9030",
+		.addr = 0x49,
+		.platform_data = &stargate2_da9030_pdata,
+		.irq = gpio_to_irq(1),
+	},
+};
 
 static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
 	/* Techically this a pca9500 - but it's compatible with the 8574
@@ -653,74 +952,6 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
 	},
 };
 
-static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &stargate2_da9030_pdata,
-		.irq = gpio_to_irq(1),
-	},
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
-	.num_chipselect = 1,
-};
-
-/* An upcoming kernel change will scrap SFRM usage so these
- * drivers have been moved to use gpio's via cs_control */
-static struct pxa2xx_spi_chip staccel_chip_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias = "lis3l02dq",
-		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
-		.bus_num = 1,
-		.chip_select = 0,
-		.controller_data = &staccel_chip_info,
-		.irq = IRQ_GPIO(96),
-	}, {
-		.modalias = "cc2420",
-		.max_speed_hz = 6500000,
-		.bus_num = 3,
-		.chip_select = 0,
-		.controller_data = &cc2420_info,
-	},
-};
-
-static void sg2_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
-		break;
-	}
-}
-
 /* Board doesn't support cable detection - so always lie and say
  * something is there.
  */
@@ -741,14 +972,6 @@ static struct platform_device *stargate2_devices[] = {
 	&sht15,
 };
 
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
-	.fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
 static void __init stargate2_init(void)
 {
 	/* This is probably a board specific hack as this must be set
@@ -757,22 +980,13 @@ static void __init stargate2_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
 
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
+	imote2_stargate2_init();
 
 	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
 
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
-	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
 	i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
-	i2c_register_board_info(1,
-				ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
-	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
-	pxa_set_i2c_info(&i2c_pdata);
+	i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
+				ARRAY_SIZE(stargate2_pwr_i2c_board_info));
 
 	pxa_set_mci_info(&stargate2_mci_platform_data);
 
@@ -780,13 +994,25 @@ static void __init stargate2_init(void)
 
 	stargate2_reset_bluetooth();
 }
+#endif
+
+#ifdef CONFIG_MACH_INTELMOTE2
+MACHINE_START(INTELMOTE2, "IMOTE 2")
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= imote2_init,
+	.boot_params	= 0xA0000100,
+MACHINE_END
+#endif
 
+#ifdef CONFIG_MACH_STARGATE2
 MACHINE_START(STARGATE2, "Stargate 2")
-	.phys_io = 0x40000000,
-	.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io = pxa_map_io,
+	.nr_irqs = STARGATE_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.timer = &pxa_timer,
 	.init_machine = stargate2_init,
 	.boot_params = 0xA0000100,
 MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index f02dcb5b4e97..2ea7545273ad 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -25,7 +25,7 @@
 
 #include <mach/pxa930.h>
 #include <mach/pxafb.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -489,9 +489,7 @@ static void __init tavorevb_init(void)
 
 MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.phys_io        = 0x40000000,
 	.boot_params    = 0xa0000100,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
new file mode 100644
index 000000000000..dc3011697bbf
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -0,0 +1,135 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb3.c
+ *
+ *  Support for the Marvell EVB3 Development Platform.
+ *
+ *  Copyright:  (C) Copyright 2008-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/mfd/88pm860x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa930.h>
+
+#include <plat/i2c.h>
+
+#include "devices.h"
+#include "generic.h"
+
+#define TAVOREVB3_NR_IRQS	(IRQ_BOARD_START + 24)
+
+static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
+	/* UART */
+	GPIO53_UART1_TXD,
+	GPIO54_UART1_RXD,
+
+	/* PMIC */
+	PMIC_INT_GPIO83,
+};
+
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct pm860x_touch_pdata evb3_touch = {
+	.gpadc_prebias	= 1,
+	.slot_cycle	= 1,
+	.tsi_prebias	= 6,
+	.pen_prebias	= 16,
+	.pen_prechg	= 2,
+	.res_x		= 300,
+};
+
+static struct pm860x_backlight_pdata evb3_backlight[] = {
+	{
+		.id	= PM8606_ID_BACKLIGHT,
+		.iset	= PM8606_WLED_CURRENT(24),
+		.flags	= PM8606_BACKLIGHT1,
+	},
+	{},
+};
+
+static struct pm860x_led_pdata evb3_led[] = {
+	{
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_RED,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_GREEN,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_BLUE,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_RED,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_GREEN,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_BLUE,
+	},
+};
+
+static struct pm860x_platform_data evb3_pm8607_info = {
+	.touch				= &evb3_touch,
+	.backlight			= &evb3_backlight[0],
+	.led				= &evb3_led[0],
+	.companion_addr			= 0x10,
+	.irq_mode			= 0,
+	.irq_base			= IRQ_BOARD_START,
+
+	.i2c_port			= GI2C_PORT,
+};
+
+static struct i2c_board_info evb3_i2c_info[] = {
+	{
+		.type		= "88PM860x",
+		.addr		= 0x34,
+		.platform_data	= &evb3_pm8607_info,
+		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+	},
+};
+
+static void __init evb3_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
+}
+#else
+static inline void evb3_init_i2c(void) {}
+#endif
+
+static void __init evb3_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
+
+	pxa_set_ffuart_info(NULL);
+
+	evb3_init_i2c();
+}
+
+MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
+	.boot_params	= 0xa0000100,
+	.map_io         = pxa_map_io,
+	.nr_irqs	= TAVOREVB3_NR_IRQS,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = evb3_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 7512b822c6ca..0ee1df49606d 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -948,15 +948,13 @@ static void __init fixup_tosa(struct machine_desc *desc,
 	sharpsl_save_param();
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
 	mi->bank[0].size = (64*1024*1024);
 }
 
 MACHINE_START(TOSA, "SHARP Tosa")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.fixup          = fixup_tosa,
 	.map_io         = pxa_map_io,
+	.nr_irqs	= TOSA_NR_IRQS,
 	.init_irq       = pxa25x_init_irq,
 	.init_machine   = tosa_init,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 69689112eae7..565d062f51d5 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -530,13 +530,9 @@ static void __init trizeps4_init(void)
 	i2c_register_board_info(0, trizeps4_i2c_devices,
 					ARRAY_SIZE(trizeps4_i2c_devices));
 
-#ifdef CONFIG_IDE_PXA_CF
-	/* if boot direct from compact flash dont disable power */
-	trizeps_conxs_bcr = 0x0009;
-#else
 	/* this is the reset value */
 	trizeps_conxs_bcr = 0x00A0;
-#endif
+
 	BCR_writew(trizeps_conxs_bcr);
 	board_backlight_power(1);
 }
@@ -559,8 +555,6 @@ static void __init trizeps4_map_io(void)
 
 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	/* MAINTAINER("Jürgen Schindele") */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
@@ -570,8 +564,6 @@ MACHINE_END
 
 MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
 	/* MAINTAINER("Jürgen Schindele") */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index e90114a7e246..438fc9a5ed59 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -992,8 +992,6 @@ static void __init viper_map_io(void)
 
 MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= viper_map_io,
 	.init_irq	= viper_init_irq,
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 9884fa978f16..f45ac0961778 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -25,6 +25,7 @@
 #include <linux/dm9000.h>
 #include <linux/ucb1400.h>
 #include <linux/ata_platform.h>
+#include <linux/regulator/max1586.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -37,6 +38,7 @@
 #include <mach/ohci.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/udc.h>
+#include <mach/pata_pxa.h>
 
 #include <plat/i2c.h>
 
@@ -238,6 +240,7 @@ static void __init vpac270_onenand_init(void) {}
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data vpac270_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
 	.gpio_card_detect	= GPIO53_VPAC270_SD_DETECT_N,
 	.gpio_card_ro		= GPIO52_VPAC270_SD_READONLY,
 	.detect_delay_ms	= 200,
@@ -464,7 +467,6 @@ static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
 
 static void __init vpac270_rtc_init(void)
 {
-	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
 }
 #else
@@ -492,7 +494,55 @@ static struct pxafb_mode_info vpac270_lcd_modes[] = {
 	.vsync_len	= 2,
 
 	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-},
+}, {	/* CRT 640x480 */
+	.pixclock	= 35000,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 16,
+	.depth		= 16,
+
+	.left_margin	= 96,
+	.right_margin	= 48,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+
+	.hsync_len	= 48,
+	.vsync_len	= 1,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, {	/* CRT 800x600 H=30kHz V=48HZ */
+	.pixclock	= 25000,
+	.xres		= 800,
+	.yres		= 600,
+	.bpp		= 16,
+	.depth		= 16,
+
+	.left_margin	= 50,
+	.right_margin	= 1,
+	.upper_margin	= 21,
+	.lower_margin	= 12,
+
+	.hsync_len	= 8,
+	.vsync_len	= 1,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}, {	/* CRT 1024x768 H=40kHz V=50Hz */
+	.pixclock	= 15000,
+	.xres		= 1024,
+	.yres		= 768,
+	.bpp		= 16,
+	.depth		= 16,
+
+	.left_margin	= 220,
+	.right_margin	= 8,
+	.upper_margin	= 33,
+	.lower_margin	= 2,
+
+	.hsync_len	= 48,
+	.vsync_len	= 1,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+}
 };
 
 static struct pxafb_mach_info vpac270_lcd_screen = {
@@ -538,9 +588,10 @@ static inline void vpac270_lcd_init(void) {}
 /******************************************************************************
  * PATA IDE
  ******************************************************************************/
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-static struct pata_platform_info vpac270_pata_pdata = {
-	.ioport_shift	= 1,
+#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
+static struct pata_pxa_pdata vpac270_pata_pdata = {
+	.reg_shift	= 1,
+	.dma_dreq	= 1,
 	.irq_flags	= IRQF_TRIGGER_RISING,
 };
 
@@ -555,7 +606,12 @@ static struct resource vpac270_ide_resources[] = {
 	       .end	= PXA_CS3_PHYS + 0x15f,
 	       .flags	= IORESOURCE_MEM
 	},
-	[2] = {	/* IDE IRQ pin */
+	[2] = {	/* DMA Base address */
+	       .start	= PXA_CS3_PHYS + 0x20,
+	       .end	= PXA_CS3_PHYS + 0x2f,
+	       .flags	= IORESOURCE_DMA
+	},
+	[3] = {	/* IDE IRQ pin */
 	       .start	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
 	       .end	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
 	       .flags	= IORESOURCE_IRQ
@@ -563,11 +619,12 @@ static struct resource vpac270_ide_resources[] = {
 };
 
 static struct platform_device vpac270_ide_device = {
-	.name		= "pata_platform",
+	.name		= "pata_pxa",
 	.num_resources	= ARRAY_SIZE(vpac270_ide_resources),
 	.resource	= vpac270_ide_resources,
 	.dev		= {
 		.platform_data	= &vpac270_pata_pdata,
+		.coherent_dma_mask	= 0xffffffff,
 	}
 };
 
@@ -580,6 +637,59 @@ static inline void vpac270_ide_init(void) {}
 #endif
 
 /******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_MAX1586) || \
+    defined(CONFIG_REGULATOR_MAX1586_MODULE)
+static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data vpac270_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 900000,
+		.max_uV		= 1705000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.consumer_supplies	= vpac270_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(vpac270_max1587a_consumers),
+};
+
+static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
+	{
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &vpac270_max1587a_v3_info,
+	}
+};
+
+static struct max1586_platform_data vpac270_max1587a_info = {
+	.subdevs     = vpac270_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
+	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
+};
+
+static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &vpac270_max1587a_info,
+	},
+};
+
+static void __init vpac270_pmic_init(void)
+{
+	i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
+}
+#else
+static inline void vpac270_pmic_init(void) {}
+#endif
+
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static void __init vpac270_init(void)
@@ -589,7 +699,10 @@ static void __init vpac270_init(void)
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
+	pxa_set_i2c_info(NULL);
+	pxa27x_set_i2c_power_info(NULL);
 
+	vpac270_pmic_init();
 	vpac270_lcd_init();
 	vpac270_mmc_init();
 	vpac270_nor_init();
@@ -605,8 +718,6 @@ static void __init vpac270_init(void)
 }
 
 MACHINE_START(VPAC270, "Voipac PXA270")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index d3b4e3f2e033..3260ce73d327 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -181,8 +181,6 @@ static void __init xcep_init(void)
 }
 
 MACHINE_START(XCEP, "Iskratel XCEP")
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.boot_params	= 0xa0000100,
 	.init_machine	= xcep_init,
 	.map_io		= pxa_map_io,
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index d303c6929d32..fefde9848d82 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -17,6 +17,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pwm_backlight.h>
+#include <linux/z2_battery.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/libertas_spi.h>
@@ -26,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/delay.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,7 +37,7 @@
 #include <mach/z2.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 
 #include <plat/i2c.h>
@@ -162,7 +164,7 @@ static struct mtd_partition z2_flash_parts[] = {
 	}, {
 		.name	= "U-Boot Environment",
 		.offset	= 0x40000,
-		.size	= 0x60000,
+		.size	= 0x20000,
 	}, {
 		.name	= "Flash",
 		.offset	= 0x60000,
@@ -452,6 +454,42 @@ static inline void z2_keys_init(void) {}
 #endif
 
 /******************************************************************************
+ * Battery
+ ******************************************************************************/
+#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct z2_battery_info batt_chip_info = {
+	.batt_I2C_bus	= 0,
+	.batt_I2C_addr	= 0x55,
+	.batt_I2C_reg	= 2,
+	.charge_gpio	= GPIO0_ZIPITZ2_AC_DETECT,
+	.min_voltage	= 2400000,
+	.max_voltage	= 3700000,
+	.batt_div	= 69,
+	.batt_mult	= 1000000,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
+	.batt_name	= "Z2",
+};
+
+static struct i2c_board_info __initdata z2_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("aer915", 0x55),
+		.platform_data	= &batt_chip_info,
+	}, {
+		I2C_BOARD_INFO("wm8750", 0x1b),
+	},
+
+};
+
+static void __init z2_i2c_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
+}
+#else
+static inline void z2_i2c_init(void) {}
+#endif
+
+/******************************************************************************
  * SSP Devices - WiFi and LCD control
  ******************************************************************************/
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
@@ -573,29 +611,99 @@ static inline void z2_spi_init(void) {}
 #endif
 
 /******************************************************************************
+ * Core power regulator
+ ******************************************************************************/
+#if defined(CONFIG_REGULATOR_TPS65023) || \
+	defined(CONFIG_REGULATOR_TPS65023_MODULE)
+static struct regulator_consumer_supply z2_tps65021_consumers[] = {
+	{
+		.supply	= "vcc_core",
+	}
+};
+
+static struct regulator_init_data z2_tps65021_info[] = {
+	{
+		.constraints = {
+			.name		= "vcc_core range",
+			.min_uV		= 800000,
+			.max_uV		= 1600000,
+			.always_on	= 1,
+			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		},
+		.consumer_supplies	= z2_tps65021_consumers,
+		.num_consumer_supplies	= ARRAY_SIZE(z2_tps65021_consumers),
+	}, {
+		.constraints = {
+			.name		= "DCDC2",
+			.min_uV		= 3300000,
+			.max_uV		= 3300000,
+			.always_on	= 1,
+		},
+	}, {
+		.constraints = {
+			.name		= "DCDC3",
+			.min_uV		= 1800000,
+			.max_uV		= 1800000,
+			.always_on	= 1,
+		},
+	}, {
+		.constraints = {
+			.name		= "LDO1",
+			.min_uV		= 1000000,
+			.max_uV		= 3150000,
+			.always_on	= 1,
+		},
+	}, {
+		.constraints = {
+			.name		= "LDO2",
+			.min_uV		= 1050000,
+			.max_uV		= 3300000,
+			.always_on	= 1,
+		},
+	}
+};
+
+static struct i2c_board_info __initdata z2_pi2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("tps65021", 0x48),
+		.platform_data	= &z2_tps65021_info,
+	},
+};
+
+static void __init z2_pmic_init(void)
+{
+	pxa27x_set_i2c_power_info(NULL);
+	i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info));
+}
+#else
+static inline void z2_pmic_init(void) {}
+#endif
+
+/******************************************************************************
  * Machine init
  ******************************************************************************/
 static void __init z2_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	z2_lcd_init();
 	z2_mmc_init();
 	z2_mkp_init();
-
-	pxa_set_i2c_info(NULL);
-
+	z2_i2c_init();
 	z2_spi_init();
 	z2_nor_init();
 	z2_pwm_init();
 	z2_leds_init();
 	z2_keys_init();
+	z2_pmic_init();
 }
 
 MACHINE_START(ZIPIT2, "Zipit Z2")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 03b9cb910e08..dea46a2d089b 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -900,10 +900,9 @@ static void __init zeus_map_io(void)
 
 MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= ((io_p2v(0x40000000) >> 18) & 0xfffc),
 	.boot_params	= 0xa0000100,
 	.map_io		= zeus_map_io,
+	.nr_irqs	= ZEUS_NR_IRQS,
 	.init_irq	= zeus_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zeus_init,
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index c479cbecf784..702f7a68e87d 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -30,7 +30,7 @@
 #include <mach/zylonite.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
-#include <mach/pxa27x_keypad.h>
+#include <plat/pxa27x_keypad.h>
 #include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
@@ -45,6 +45,16 @@ int wm9713_irq;
 int lcd_id;
 int lcd_orientation;
 
+struct platform_device pxa_device_wm9713_audio = {
+	.name		= "wm9713-codec",
+	.id		= -1,
+};
+
+static void __init zylonite_init_wm9713_audio(void)
+{
+	platform_device_register(&pxa_device_wm9713_audio);
+}
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= ZYLONITE_ETH_PHYS + 0x300,
@@ -408,13 +418,13 @@ static void __init zylonite_init(void)
 	zylonite_init_nand();
 	zylonite_init_leds();
 	zylonite_init_ohci();
+	zylonite_init_wm9713_audio();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
-	.phys_io	= 0x40000000,
 	.boot_params	= 0xa0000100,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= pxa_map_io,
+	.nr_irqs	= ZYLONITE_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zylonite_init,
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 02e9fdeb8faf..07c08151dfe6 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -61,12 +61,11 @@ void __iomem *gic_cpu_base_addr;
 /*
  * Adjust the zones if there are restrictions for DMA access.
  */
-void __init realview_adjust_zones(int node, unsigned long *size,
-				  unsigned long *hole)
+void __init realview_adjust_zones(unsigned long *size, unsigned long *hole)
 {
 	unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
 
-	if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
+	if (!machine_is_realview_pbx() || size[0] <= dma_size)
 		return;
 
 	size[ZONE_NORMAL] = size[0] - dma_size;
@@ -232,6 +231,21 @@ static unsigned int realview_mmc_status(struct device *dev)
 	struct amba_device *adev = container_of(dev, struct amba_device, dev);
 	u32 mask;
 
+	if (machine_is_realview_pb1176()) {
+		static bool inserted = false;
+
+		/*
+		 * The PB1176 does not have the status register,
+		 * assume it is inserted at startup, then invert
+		 * for each call so card insertion/removal will
+		 * be detected anyway. This will not be called if
+		 * GPIO on PL061 is active, which is the proper
+		 * way to do this on the PB1176.
+		 */
+		inserted = !inserted;
+		return inserted ? 0 : 1;
+	}
+
 	if (adev->res.start == REALVIEW_MMCI0_BASE)
 		mask = 1;
 	else
@@ -245,6 +259,7 @@ struct mmci_platform_data realview_mmc0_plat_data = {
 	.status		= realview_mmc_status,
 	.gpio_wp	= 17,
 	.gpio_cd	= 16,
+	.cd_invert	= true,
 };
 
 struct mmci_platform_data realview_mmc1_plat_data = {
@@ -252,6 +267,7 @@ struct mmci_platform_data realview_mmc1_plat_data = {
 	.status		= realview_mmc_status,
 	.gpio_wp	= 19,
 	.gpio_cd	= 18,
+	.cd_invert	= true,
 };
 
 /*
@@ -300,8 +316,13 @@ static struct clk ref24_clk = {
 	.rate	= 24000000,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup lookups[] = {
-	{	/* UART0 */
+	{	/* Bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "dev:uart0",
 		.clk		= &ref24_clk,
 	}, {	/* UART1 */
@@ -313,6 +334,12 @@ static struct clk_lookup lookups[] = {
 	}, {	/* UART3 */
 		.dev_id		= "fpga:uart3",
 		.clk		= &ref24_clk,
+	}, {	/* UART3 is on the dev chip in PB1176 */
+		.dev_id		= "dev:uart3",
+		.clk		= &ref24_clk,
+	}, {	/* UART4 only exists in PB1176 */
+		.dev_id		= "fpga:uart4",
+		.clk		= &ref24_clk,
 	}, {	/* KMI0 */
 		.dev_id		= "fpga:kmi0",
 		.clk		= &ref24_clk,
@@ -322,12 +349,15 @@ static struct clk_lookup lookups[] = {
 	}, {	/* MMC0 */
 		.dev_id		= "fpga:mmc0",
 		.clk		= &ref24_clk,
-	}, {	/* EB:CLCD */
+	}, {	/* CLCD is in the PB1176 and EB DevChip */
 		.dev_id		= "dev:clcd",
 		.clk		= &oscvco_clk,
 	}, {	/* PB:CLCD */
 		.dev_id		= "issp:clcd",
 		.clk		= &oscvco_clk,
+	}, {	/* SSP */
+		.dev_id		= "dev:ssp0",
+		.clk		= &ref24_clk,
 	}
 };
 
@@ -342,7 +372,7 @@ static int __init clk_init(void)
 
 	return 0;
 }
-arch_initcall(clk_init);
+core_initcall(clk_init);
 
 /*
  * CLCD support.
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 2f5ccb298858..002ab5d8c11c 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -26,6 +26,7 @@
 /*
  * Peripheral addresses
  */
+#define REALVIEW_PB1176_UART4_BASE		0x10009000 /* UART 4 */
 #define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
 #define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
 #define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 86622289b74e..90b687cbe04e 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,12 +33,10 @@
 #error "Unknown RealView platform"
 #endif
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xfb000000	@ virtual base
-		orr	\rx, \rx, #DEBUG_LL_UART_OFFSET
+		.macro	addruart, rp, rv
+		mov	\rp, #DEBUG_LL_UART_OFFSET
+		orr	\rv, \rp, #0xfb000000	@ virtual base
+		orr	\rp, \rp, #0x10000000	@ physical base
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 830055bb8628..5c3c625e3e04 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -40,6 +40,7 @@
 #define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
 #define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
 #define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_SSP		(IRQ_DC1176_GIC_START + 17)	/* SSP port */
 #define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
 #define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
 #define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
@@ -73,7 +74,6 @@
 #define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
 
 #define IRQ_PB1176_GPIO0	-1
-#define IRQ_PB1176_SSP		-1
 #define IRQ_PB1176_SCTL		-1
 
 #define NR_GIC_PB1176		2
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
index 2417bbcf97fd..5dafc157b276 100644
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -30,10 +30,9 @@
 #endif
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
-extern void realview_adjust_zones(int node, unsigned long *size,
-				  unsigned long *hole);
-#define arch_adjust_zones(node, size, hole) \
-	realview_adjust_zones(node, size, hole)
+extern void realview_adjust_zones(unsigned long *size, unsigned long *hole);
+#define arch_adjust_zones(size, hole) \
+	realview_adjust_zones(size, hole)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_256M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_256M)
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
index dd53892d44a7..d3cd265cb058 100644
--- a/arch/arm/mach-realview/include/mach/smp.h
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -1,16 +1,8 @@
 #ifndef ASMARM_ARCH_SMP_H
 #define ASMARM_ARCH_SMP_H
 
-
 #include <asm/hardware/gic.h>
-
-#define hard_smp_processor_id()			\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x0F;				\
-	})
+#include <asm/smp_mpidr.h>
 
 /*
  * We use IRQ1 as the IPI
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 4425018fab82..f2697106f809 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -129,6 +130,12 @@ static struct pl061_platform_data gpio2_plat_data = {
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView EB AMBA devices
  */
@@ -213,7 +220,7 @@ AMBA_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
 AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
 AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   NULL);
+AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
@@ -324,6 +331,26 @@ static struct platform_device pmu_device = {
 	.resource		= pmu_resources,
 };
 
+static struct resource char_lcd_resources[] = {
+	{
+		.start = REALVIEW_CHAR_LCD_BASE,
+		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_EB_CHARLCD,
+		.end	= IRQ_EB_CHARLCD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device char_lcd_device = {
+	.name		=	"arm-charlcd",
+	.id		=	-1,
+	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
+	.resource	=	char_lcd_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -442,6 +469,7 @@ static void __init realview_eb_init(void)
 
 	realview_flash_register(&realview_eb_flash_resource, 1);
 	platform_device_register(&realview_i2c_device);
+	platform_device_register(&char_lcd_device);
 	eth_device_register();
 	realview_usb_register(realview_eb_isp1761_resources);
 
@@ -458,8 +486,6 @@ static void __init realview_eb_init(void)
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_EB_UART0_BASE & SECTION_MASK,
-	.io_pg_offst	= (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_eb_map_io,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 099a1f125cf8..a4125619d71b 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -123,6 +124,12 @@ static struct pl061_platform_data gpio2_plat_data = {
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PB1176 AMBA devices
  */
@@ -144,8 +151,6 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define MPMC_DMA	{ 0, 0 }
 #define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD, NO_IRQ }
 #define PB1176_CLCD_DMA	{ 0, 0 }
-#define DMAC_IRQ	{ IRQ_PB1176_DMAC, NO_IRQ }
-#define DMAC_DMA	{ 0, 0 }
 #define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
 #define SCTL_DMA	{ 0, 0 }
 #define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG, NO_IRQ }
@@ -166,7 +171,9 @@ static struct pl061_platform_data gpio2_plat_data = {
 #define PB1176_UART2_DMA	{ 11, 10 }
 #define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3, NO_IRQ }
 #define PB1176_UART3_DMA	{ 0x86, 0x87 }
-#define PB1176_SSP_IRQ		{ IRQ_PB1176_SSP, NO_IRQ }
+#define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4, NO_IRQ }
+#define PB1176_UART4_DMA	{ 0, 0 }
+#define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP, NO_IRQ }
 #define PB1176_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
@@ -174,7 +181,7 @@ AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
 AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
 AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
 AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:uart3",	PB1176_UART3,	NULL);
+AMBA_DEVICE(uart4,	"fpga:uart4",	PB1176_UART4,	NULL);
 
 /* DevChip Primecells */
 AMBA_DEVICE(smc,	"dev:smc",	PB1176_SMC,	NULL);
@@ -188,18 +195,16 @@ AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	NULL);
-
-/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:clcd",	PB1176_CLCD,	&clcd_plat_data);
-//AMBA_DEVICE(dmac,	"issp:dmac",	PB1176_DMAC,	NULL);
+AMBA_DEVICE(uart3,	"dev:uart3",	PB1176_UART3,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	&ssp0_plat_data);
+AMBA_DEVICE(clcd,	"dev:clcd",	PB1176_CLCD,	&clcd_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
-//	&dmac_device,
 	&uart0_device,
 	&uart1_device,
 	&uart2_device,
 	&uart3_device,
+	&uart4_device,
 	&smc_device,
 	&clcd_device,
 	&sctl_device,
@@ -276,6 +281,26 @@ static struct platform_device pmu_device = {
 	.resource		= &pmu_resource,
 };
 
+static struct resource char_lcd_resources[] = {
+	{
+		.start = REALVIEW_CHAR_LCD_BASE,
+		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_PB1176_CHARLCD,
+		.end	= IRQ_PB1176_CHARLCD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device char_lcd_device = {
+	.name		=	"arm-charlcd",
+	.id		=	-1,
+	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
+	.resource	=	char_lcd_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM1176 DevChip GIC, primary */
@@ -338,6 +363,7 @@ static void __init realview_pb1176_init(void)
 	platform_device_register(&realview_i2c_device);
 	realview_usb_register(realview_pb1176_isp1761_resources);
 	platform_device_register(&pmu_device);
+	platform_device_register(&char_lcd_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -352,8 +378,6 @@ static void __init realview_pb1176_init(void)
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB1176_UART0_BASE & SECTION_MASK,
-	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pb1176_fixup,
 	.map_io		= realview_pb1176_map_io,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 0e07a5ccb75f..117b95b2ca15 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -124,6 +125,12 @@ static struct pl061_platform_data gpio2_plat_data = {
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PB11MPCore AMBA devices
  */
@@ -190,7 +197,7 @@ AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
 AMBA_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
@@ -374,8 +381,6 @@ static void __init realview_pb11mp_init(void)
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB11MP_UART0_BASE & SECTION_MASK,
-	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_pb11mp_map_io,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index ac2f06f1ca50..929b8dc12e81 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -25,6 +25,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -114,6 +115,12 @@ static struct pl061_platform_data gpio2_plat_data = {
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PBA8Core AMBA devices
  */
@@ -180,7 +187,7 @@ AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
 AMBA_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
@@ -324,8 +331,6 @@ static void __init realview_pba8_init(void)
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBA8_UART0_BASE & SECTION_MASK,
-	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_pba8_map_io,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 08fd683adc4c..b9f9e20031a7 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -24,6 +24,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -136,6 +137,12 @@ static struct pl061_platform_data gpio2_plat_data = {
 	.irq_base	= -1,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 /*
  * RealView PBXCore AMBA devices
  */
@@ -202,7 +209,7 @@ AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
 AMBA_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
 AMBA_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
 AMBA_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
@@ -410,8 +417,6 @@ static void __init realview_pbx_init(void)
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBX_UART0_BASE & SECTION_MASK,
-	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pbx_fixup,
 	.map_io		= realview_pbx_map_io,
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index 6fc8d66395dc..85effffdc2b2 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x03000000
-		movne	\rx, #0xe0000000
-		orr	\rx, \rx, #0x00010000
-		orr	\rx, \rx, #0x00000fe0
+		.macro	addruart, rp, rv
+		mov	\rp, #0x00010000
+		orr	\rp, \rp, #0x00000fe0
+		orr	\rv, \rp, #0xe0000000	@ virtual
+		orr	\rp, \rp, #0x03000000	@ physical
 		.endm
 
 #define UART_SHIFT	2
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
index 9a96fd69e705..3bcd86fadb81 100644
--- a/arch/arm/mach-rpc/include/mach/vmalloc.h
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
+#define VMALLOC_END       0xdc000000
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index c7fc01e9d1f6..580b3c73d2c7 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -218,8 +218,6 @@ extern struct sys_timer ioc_timer;
 
 MACHINE_START(RISCPC, "Acorn-RiscPC")
 	/* Maintainer: Russell King */
-	.phys_io	= 0x03000000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.reserve_lp0	= 1,
 	.reserve_lp1	= 1,
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 8cdeb14af592..8aa2f1902a94 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -30,7 +30,7 @@ static void h1940bt_enable(int on)
 {
 	if (on) {
 		/* Power on the chip */
-		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
+		gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1);
 		/* Reset the chip */
 		mdelay(10);
 
@@ -43,7 +43,7 @@ static void h1940bt_enable(int on)
 		mdelay(10);
 		gpio_set_value(S3C2410_GPH(1), 0);
 		mdelay(10);
-		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
+		gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
 	}
 }
 
@@ -64,7 +64,14 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
 
 	ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
 	if (ret) {
-		dev_err(&pdev->dev, "could not get GPH1\n");\
+		dev_err(&pdev->dev, "could not get GPH1\n");
+		return ret;
+	}
+
+	ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev));
+	if (ret) {
+		gpio_free(S3C2410_GPH(1));
+		dev_err(&pdev->dev, "could not get BT_POWER\n");
 		return ret;
 	}
 
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 0eef78b4a6ed..5882deaa56be 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,13 +19,12 @@
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
 
-	.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C24XX_PA_UART
-		ldrne	\rx, = S3C24XX_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C24XX_PA_UART
+		ldr	\rv, = S3C24XX_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index b649bf2ccd5c..f7f6b07df30e 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -22,6 +22,8 @@
 
 #ifdef CONFIG_CPU_S3C244X
 #define ARCH_NR_GPIOS	(32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
+#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#define ARCH_NR_GPIOS	(32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA)
 #else
 #define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
 #endif
@@ -30,8 +32,10 @@
 #include <mach/gpio-nrs.h>
 #include <mach/gpio-fns.h>
 
-#ifdef CONFIG_CPU_S3C24XX
-#define S3C_GPIO_END	(S3C2410_GPIO_BANKJ + 32)
+#ifdef CONFIG_CPU_S3C244X
+#define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
+#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#define S3C_GPIO_END	(S3C2410_GPM(0) + 32)
 #else
-#define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
+#define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
 #endif
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
index d8a832729a8a..97e42bfce81e 100644
--- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -14,51 +14,30 @@
 #ifndef __ASM_ARCH_H1940_LATCH_H
 #define __ASM_ARCH_H1940_LATCH_H
 
+#include <mach/gpio.h>
 
-#ifndef __ASSEMBLY__
-#define H1940_LATCH		((void __force __iomem *)0xF8000000)
-#else
-#define H1940_LATCH		0xF8000000
-#endif
-
-#define H1940_PA_LATCH		(S3C2410_CS2)
+#define H1940_LATCH_GPIO(x)		(S3C_GPIO_END + (x))
 
 /* SD layer latch */
 
-#define H1940_LATCH_SDQ1		(1<<16)
-#define H1940_LATCH_LCD_P1		(1<<17)
-#define H1940_LATCH_LCD_P2		(1<<18)
-#define H1940_LATCH_LCD_P3		(1<<19)
-#define H1940_LATCH_MAX1698_nSHUTDOWN	(1<<20)		/* LCD backlight */
-#define H1940_LATCH_LED_RED		(1<<21)
-#define H1940_LATCH_SDQ7		(1<<22)
-#define H1940_LATCH_USB_DP		(1<<23)
+#define H1940_LATCH_LCD_P0		H1940_LATCH_GPIO(0)
+#define H1940_LATCH_LCD_P1		H1940_LATCH_GPIO(1)
+#define H1940_LATCH_LCD_P2		H1940_LATCH_GPIO(2)
+#define H1940_LATCH_LCD_P3		H1940_LATCH_GPIO(3)
+#define H1940_LATCH_MAX1698_nSHUTDOWN	H1940_LATCH_GPIO(4)
+#define H1940_LATCH_LED_RED		H1940_LATCH_GPIO(5)
+#define H1940_LATCH_SDQ7		H1940_LATCH_GPIO(6)
+#define H1940_LATCH_USB_DP		H1940_LATCH_GPIO(7)
 
 /* CPU layer latch */
 
-#define H1940_LATCH_UDA_POWER		(1<<24)
-#define H1940_LATCH_AUDIO_POWER		(1<<25)
-#define H1940_LATCH_SM803_ENABLE	(1<<26)
-#define H1940_LATCH_LCD_P4		(1<<27)
-#define H1940_LATCH_CPUQ5		(1<<28)		/* untraced */
-#define H1940_LATCH_BLUETOOTH_POWER	(1<<29)		/* active high */
-#define H1940_LATCH_LED_GREEN		(1<<30)
-#define H1940_LATCH_LED_FLASH		(1<<31)
-
-/* default settings */
-
-#define H1940_LATCH_DEFAULT		\
-	H1940_LATCH_LCD_P4		| \
-	H1940_LATCH_SM803_ENABLE	| \
-	H1940_LATCH_SDQ1		| \
-	H1940_LATCH_LCD_P1		| \
-	H1940_LATCH_LCD_P2		| \
-	H1940_LATCH_LCD_P3		| \
-	H1940_LATCH_MAX1698_nSHUTDOWN   | \
-	H1940_LATCH_CPUQ5
-
-/* control functions */
-
-extern void h1940_latch_control(unsigned int clear, unsigned int set);
+#define H1940_LATCH_UDA_POWER		H1940_LATCH_GPIO(8)
+#define H1940_LATCH_AUDIO_POWER		H1940_LATCH_GPIO(9)
+#define H1940_LATCH_SM803_ENABLE	H1940_LATCH_GPIO(10)
+#define H1940_LATCH_LCD_P4		H1940_LATCH_GPIO(11)
+#define H1940_LATCH_SD_POWER		H1940_LATCH_GPIO(12)
+#define H1940_LATCH_BLUETOOTH_POWER	H1940_LATCH_GPIO(13)
+#define H1940_LATCH_LED_GREEN		H1940_LATCH_GPIO(14)
+#define H1940_LATCH_LED_FLASH		H1940_LATCH_GPIO(15)
 
 #endif /* __ASM_ARCH_H1940_LATCH_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 08ab9dfb6ae6..101aeea22310 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -118,6 +118,8 @@
 #define S3C2443_SCLKCON_UARTCLK		(1<<8)
 #define S3C2443_SCLKCON_USBHOST		(1<<1)
 
+#define S3C2443_PWRCFG_SLEEP		(1<<15)
+
 #include <asm/div64.h>
 
 static inline unsigned int
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
index 315b0078a34d..7a311e8dddba 100644
--- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -15,6 +15,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 34fc05a4244b..44440cbd7620 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -241,8 +241,6 @@ static void __init amlm5900_init(void)
 }
 
 MACHINE_START(AML_M5900, "AML_M5900")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index c1f90f6fab42..2970ea9f7c2b 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -664,8 +664,6 @@ static void __init bast_init(void)
 
 MACHINE_START(BAST, "Simtec-BAST")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= bast_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 779b45b3f80f..d7ada8c7e41f 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/memblock.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
@@ -23,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/pwm_backlight.h>
+#include <linux/i2c.h>
 #include <video/platform_lcd.h>
 
 #include <linux/mmc/host.h>
@@ -58,6 +60,14 @@
 #include <plat/mci.h>
 #include <plat/ts.h>
 
+#include <sound/uda1380.h>
+
+#define H1940_LATCH		((void __force __iomem *)0xF8000000)
+
+#define H1940_PA_LATCH		S3C2410_CS2
+
+#define H1940_LATCH_BIT(x)	(1 << ((x) + 16 - S3C_GPIO_END))
+
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
 		.virtual	= (unsigned long)H1940_LATCH,
@@ -99,9 +109,9 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
 
 /* Board control latch control */
 
-static unsigned int latch_state = H1940_LATCH_DEFAULT;
+static unsigned int latch_state;
 
-void h1940_latch_control(unsigned int clear, unsigned int set)
+static void h1940_latch_control(unsigned int clear, unsigned int set)
 {
 	unsigned long flags;
 
@@ -115,7 +125,42 @@ void h1940_latch_control(unsigned int clear, unsigned int set)
 	local_irq_restore(flags);
 }
 
-EXPORT_SYMBOL_GPL(h1940_latch_control);
+static inline int h1940_gpiolib_to_latch(int offset)
+{
+	return 1 << (offset + 16);
+}
+
+static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	int latch_bit = h1940_gpiolib_to_latch(offset);
+
+	h1940_latch_control(value ? 0 : latch_bit,
+		value ? latch_bit : 0);
+}
+
+static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	h1940_gpiolib_latch_set(chip, offset, value);
+	return 0;
+}
+
+static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
+					unsigned offset)
+{
+	return (latch_state >> (offset + 16)) & 1;
+}
+
+struct gpio_chip h1940_latch_gpiochip = {
+	.base			= H1940_LATCH_GPIO(0),
+	.owner			= THIS_MODULE,
+	.label			= "H1940_LATCH",
+	.ngpio			= 16,
+	.direction_output	= h1940_gpiolib_latch_output,
+	.set			= h1940_gpiolib_latch_set,
+	.get			= h1940_gpiolib_latch_get,
+};
 
 static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
@@ -124,10 +169,10 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 	switch (cmd)
 	{
 		case S3C2410_UDC_P_ENABLE :
-			h1940_latch_control(0, H1940_LATCH_USB_DP);
+			gpio_set_value(H1940_LATCH_USB_DP, 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			h1940_latch_control(H1940_LATCH_USB_DP, 0);
+			gpio_set_value(H1940_LATCH_USB_DP, 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -198,10 +243,25 @@ static struct platform_device h1940_device_bluetooth = {
 	.id               = -1,
 };
 
+static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+	switch (power_mode) {
+	case MMC_POWER_OFF:
+		gpio_set_value(H1940_LATCH_SD_POWER, 0);
+		break;
+	case MMC_POWER_UP:
+	case MMC_POWER_ON:
+		gpio_set_value(H1940_LATCH_SD_POWER, 1);
+		break;
+	default:
+		break;
+	};
+}
+
 static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
 	.gpio_detect   = S3C2410_GPF(5),
 	.gpio_wprotect = S3C2410_GPH(8),
-	.set_power     = NULL,
+	.set_power     = h1940_set_mmc_power,
 	.ocr_avail     = MMC_VDD_32_33,
 };
 
@@ -212,15 +272,32 @@ static int h1940_backlight_init(struct device *dev)
 	gpio_direction_output(S3C2410_GPB(0), 0);
 	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+	gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
 
 	return 0;
 }
 
+static int h1940_backlight_notify(struct device *dev, int brightness)
+{
+	if (!brightness) {
+		gpio_direction_output(S3C2410_GPB(0), 1);
+		gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
+	} else {
+		gpio_direction_output(S3C2410_GPB(0), 0);
+		s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+		gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
+	}
+	return brightness;
+}
+
 static void h1940_backlight_exit(struct device *dev)
 {
 	gpio_direction_output(S3C2410_GPB(0), 1);
+	gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
 }
 
+
 static struct platform_pwm_backlight_data backlight_data = {
 	.pwm_id         = 0,
 	.max_brightness = 100,
@@ -228,6 +305,7 @@ static struct platform_pwm_backlight_data backlight_data = {
 	/* tcnt = 0x31 */
 	.pwm_period_ns  = 36296,
 	.init           = h1940_backlight_init,
+	.notify		= h1940_backlight_notify,
 	.exit           = h1940_backlight_exit,
 };
 
@@ -246,19 +324,37 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd,
 	int value;
 
 	if (!power) {
-		/* set to 3ec */
-		gpio_direction_output(S3C2410_GPC(0), 0);
+		gpio_set_value(S3C2410_GPC(0), 0);
 		/* wait for 3ac */
 		do {
 			value = gpio_get_value(S3C2410_GPC(6));
 		} while (value);
-		/* set to 38c */
-		gpio_direction_output(S3C2410_GPC(5), 0);
+
+		gpio_set_value(H1940_LATCH_LCD_P2, 0);
+		gpio_set_value(H1940_LATCH_LCD_P3, 0);
+		gpio_set_value(H1940_LATCH_LCD_P4, 0);
+
+		gpio_direction_output(S3C2410_GPC(1), 0);
+		gpio_direction_output(S3C2410_GPC(4), 0);
+
+		gpio_set_value(H1940_LATCH_LCD_P1, 0);
+		gpio_set_value(H1940_LATCH_LCD_P0, 0);
+
+		gpio_set_value(S3C2410_GPC(5), 0);
+
 	} else {
-		/* Set to 3ac */
-		gpio_direction_output(S3C2410_GPC(5), 1);
-		/* Set to 3ad */
-		gpio_direction_output(S3C2410_GPC(0), 1);
+		gpio_set_value(H1940_LATCH_LCD_P0, 1);
+		gpio_set_value(H1940_LATCH_LCD_P1, 1);
+
+		s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
+
+		gpio_set_value(S3C2410_GPC(5), 1);
+		gpio_set_value(S3C2410_GPC(0), 1);
+
+		gpio_set_value(H1940_LATCH_LCD_P3, 1);
+		gpio_set_value(H1940_LATCH_LCD_P2, 1);
+		gpio_set_value(H1940_LATCH_LCD_P4, 1);
 	}
 }
 
@@ -272,12 +368,26 @@ static struct platform_device h1940_lcd_powerdev = {
 	.dev.platform_data      = &h1940_lcd_power_data,
 };
 
+static struct uda1380_platform_data uda1380_info = {
+	.gpio_power	= H1940_LATCH_UDA_POWER,
+	.gpio_reset	= S3C2410_GPA(12),
+	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
+};
+
+static struct i2c_board_info h1940_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("uda1380", 0x1a),
+		.platform_data = &uda1380_info,
+	},
+};
+
 static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
+	&s3c_device_pcm,
 	&s3c_device_usbgadget,
 	&h1940_device_leds,
 	&h1940_device_bluetooth,
@@ -302,6 +412,17 @@ static void __init h1940_map_io(void)
 	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
 #endif
 	s3c_pm_init();
+
+	/* Add latch gpio chip, set latch initial value */
+	h1940_latch_control(0, 0);
+	WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init h1940_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
 }
 
 static void __init h1940_init_irq(void)
@@ -332,20 +453,45 @@ static void __init h1940_init(void)
 	writel(tmp, S3C2410_UPLLCON);
 
 	gpio_request(S3C2410_GPC(0), "LCD power");
+	gpio_request(S3C2410_GPC(1), "LCD power");
+	gpio_request(S3C2410_GPC(4), "LCD power");
 	gpio_request(S3C2410_GPC(5), "LCD power");
 	gpio_request(S3C2410_GPC(6), "LCD power");
-
+	gpio_request(H1940_LATCH_LCD_P0, "LCD power");
+	gpio_request(H1940_LATCH_LCD_P1, "LCD power");
+	gpio_request(H1940_LATCH_LCD_P2, "LCD power");
+	gpio_request(H1940_LATCH_LCD_P3, "LCD power");
+	gpio_request(H1940_LATCH_LCD_P4, "LCD power");
+	gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
+	gpio_direction_output(S3C2410_GPC(0), 0);
+	gpio_direction_output(S3C2410_GPC(1), 0);
+	gpio_direction_output(S3C2410_GPC(4), 0);
+	gpio_direction_output(S3C2410_GPC(5), 0);
 	gpio_direction_input(S3C2410_GPC(6));
+	gpio_direction_output(H1940_LATCH_LCD_P0, 0);
+	gpio_direction_output(H1940_LATCH_LCD_P1, 0);
+	gpio_direction_output(H1940_LATCH_LCD_P2, 0);
+	gpio_direction_output(H1940_LATCH_LCD_P3, 0);
+	gpio_direction_output(H1940_LATCH_LCD_P4, 0);
+	gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
+
+	gpio_request(H1940_LATCH_USB_DP, "USB pullup");
+	gpio_direction_output(H1940_LATCH_USB_DP, 0);
+
+	gpio_request(H1940_LATCH_SD_POWER, "SD power");
+	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
 
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
+
+	i2c_register_board_info(0, h1940_i2c_devices,
+		ARRAY_SIZE(h1940_i2c_devices));
 }
 
 MACHINE_START(H1940, "IPAQ-H1940")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= h1940_map_io,
+	.reserve	= h1940_reserve,
 	.init_irq	= h1940_init_irq,
 	.init_machine	= h1940_init,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 41f299d983eb..271b9aa6d40a 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -605,8 +605,6 @@ MACHINE_START(N30, "Acer-N30")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>,
 				Ben Dooks <ben-linux@fluff.org>
 	*/
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
@@ -617,8 +615,6 @@ MACHINE_END
 MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index d8c7f2efc1a7..0aa16cd5acbc 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -116,8 +116,6 @@ static void __init otom11_init(void)
 
 MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index d0e87b6e2e0f..e8f49feef28c 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -362,8 +362,6 @@ static void __init qt2410_machine_init(void)
 }
 
 MACHINE_START(QT2410, "QT2410")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 452223042201..e17f03387aba 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -111,8 +111,6 @@ static void __init smdk2410_init(void)
 MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
 				    * to SMDK2410 */
 	/* Maintainer: Jonas Dietsche */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 929164a8e9b1..a15d0621c22f 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -152,8 +152,6 @@ static void __init tct_hammer_init(void)
 }
 
 MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index d540d79dd264..6ccce5a761b4 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -400,8 +400,6 @@ static void __init vr1000_init(void)
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 478f4b4606c2..923e01bdf017 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -675,8 +675,6 @@ static void __init jive_machine_init(void)
 
 MACHINE_START(JIVE, "JIVE")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index ba93a356a839..8e5758bdd666 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -119,7 +119,6 @@ static void __init smdk2413_fixup(struct machine_desc *desc,
 		mi->nr_banks=1;
 		mi->bank[0].start = 0x30000000;
 		mi->bank[0].size = SZ_64M;
-		mi->bank[0].node = 0;
 	}
 }
 
@@ -151,8 +150,6 @@ static void __init smdk2413_machine_init(void)
 
 MACHINE_START(S3C2413, "S3C2413")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.fixup		= smdk2413_fixup,
@@ -164,8 +161,6 @@ MACHINE_END
 
 MACHINE_START(SMDK2412, "SMDK2412")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.fixup		= smdk2413_fixup,
@@ -177,8 +172,6 @@ MACHINE_END
 
 MACHINE_START(SMDK2413, "SMDK2413")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.fixup		= smdk2413_fixup,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 3ca9265b6997..83544ebe20ac 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -137,7 +137,6 @@ static void __init vstms_fixup(struct machine_desc *desc,
 		mi->nr_banks=1;
 		mi->bank[0].start = 0x30000000;
 		mi->bank[0].size = SZ_64M;
-		mi->bank[0].node = 0;
 	}
 }
 
@@ -157,8 +156,6 @@ static void __init vstms_init(void)
 }
 
 MACHINE_START(VSTMS, "VSTMS")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.fixup		= vstms_fixup,
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index bef39f77729d..4c6df51ddf33 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -51,6 +51,7 @@
 #include <plat/clock.h>
 #include <plat/pm.h>
 #include <plat/pll.h>
+#include <plat/nand-core.h>
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
@@ -92,7 +93,7 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 	/* rename devices that are s3c2412/s3c2413 specific */
 	s3c_device_sdi.name  = "s3c2412-sdi";
 	s3c_device_lcd.name  = "s3c2412-lcd";
-	s3c_device_nand.name = "s3c2412-nand";
+	s3c_nand_setname("s3c2412-nand");
 
 	/* alter IRQ of SDI controller */
 
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 657e4fe17f39..87b9c9f003bd 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -25,6 +25,11 @@ config S3C2416_DMA
 	help
 	  Internal config node for S3C2416 DMA support
 
+config S3C2416_PM
+	bool
+	help
+	  Internal config node to apply S3C2416 power management
+
 menu "S3C2416 Machines"
 
 config MACH_SMDK2416
@@ -33,6 +38,7 @@ config MACH_SMDK2416
 	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
+	select S3C2416_PM if PM
 	help
 	  Say Y here if you are using an SMDK2416
 
diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile
index 6c12c7bf40ad..ef038d62ffdb 100644
--- a/arch/arm/mach-s3c2416/Makefile
+++ b/arch/arm/mach-s3c2416/Makefile
@@ -11,7 +11,7 @@ obj-				:=
 
 obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock.o
 obj-$(CONFIG_CPU_S3C2416)	+= irq.o
-
+obj-$(CONFIG_S3C2416_PM)	+= pm.o
 #obj-$(CONFIG_S3C2416_DMA)	+= dma.o
 
 # Machine support
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 89f521d59d06..084d121f368c 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -243,6 +243,8 @@ static int __init s3c2416_irq_add(struct sys_device *sysdev)
 
 static struct sysdev_driver s3c2416_irq_driver = {
 	.add		= s3c2416_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
 };
 
 static int __init s3c2416_irq_init(void)
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index 5fc3f67ef265..7fc366476d7e 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -195,8 +195,6 @@ static void __init smdk2416_machine_init(void)
 
 MACHINE_START(SMDK2416, "SMDK2416")
 	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c
new file mode 100644
index 000000000000..4a04205b04d5
--- /dev/null
+++ b/arch/arm/mach-s3c2416/pm.c
@@ -0,0 +1,84 @@
+/* linux/arch/arm/mach-s3c2416/pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/regs-power.h>
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+extern void s3c2412_sleep_enter(void);
+
+static void s3c2416_cpu_suspend(void)
+{
+	flush_cache_all();
+
+	/* enable wakeup sources regardless of battery state */
+	__raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
+
+	/* set the mode as sleep, 2BED represents "Go to BED" */
+	__raw_writel(0x2BED, S3C2443_PWRMODE);
+
+	s3c2412_sleep_enter();
+}
+
+static void s3c2416_pm_prepare(void)
+{
+	/*
+	 * write the magic value u-boot uses to check for resume into
+	 * the INFORM0 register, and ensure INFORM1 is set to the
+	 * correct address to resume from.
+	 */
+	__raw_writel(0x2BED, S3C2412_INFORM0);
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
+}
+
+static int s3c2416_pm_add(struct sys_device *sysdev)
+{
+	pm_cpu_prep = s3c2416_pm_prepare;
+	pm_cpu_sleep = s3c2416_cpu_suspend;
+
+	return 0;
+}
+
+static int s3c2416_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	return 0;
+}
+
+static int s3c2416_pm_resume(struct sys_device *dev)
+{
+	/* unset the return-from-sleep amd inform flags */
+	__raw_writel(0x0, S3C2443_PWRMODE);
+	__raw_writel(0x0, S3C2412_INFORM0);
+	__raw_writel(0x0, S3C2412_INFORM1);
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2416_pm_driver = {
+	.add		= s3c2416_pm_add,
+	.suspend	= s3c2416_pm_suspend,
+	.resume		= s3c2416_pm_resume,
+};
+
+static __init int s3c2416_pm_init(void)
+{
+	return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver);
+}
+
+arch_initcall(s3c2416_pm_init);
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 35dabccd0ac2..63f39cdc0972 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -55,6 +55,8 @@
 #include <plat/cpu.h>
 
 #include <plat/iic-core.h>
+#include <plat/fb-core.h>
+#include <plat/nand-core.h>
 
 static struct map_desc s3c2416_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -90,7 +92,7 @@ int __init s3c2416_init(void)
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
 
-	s3c_device_fb.name = "s3c2443-fb";
+	s3c_fb_setname("s3c2443-fb");
 
 	return sysdev_register(&s3c2416_sysdev);
 }
@@ -99,7 +101,7 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
 
-	s3c_device_nand.name = "s3c2416-nand";
+	s3c_nand_setname("s3c2412-nand");
 }
 
 /* s3c2416_map_io
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index cd8e7de388f0..ff024a6c0f85 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -4,7 +4,6 @@
 
 config CPU_S3C2440
 	bool
-	depends on ARCH_S3C2410
 	select CPU_ARM920T
 	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
@@ -18,7 +17,6 @@ config CPU_S3C2440
 
 config CPU_S3C2442
 	bool
-	depends on ARCH_S3C2410
 	select CPU_ARM920T
 	select S3C2410_CLOCK
 	select S3C2410_GPIO
@@ -30,7 +28,7 @@ config CPU_S3C2442
 
 config CPU_S3C244X
 	bool
-	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+	depends on CPU_S3C2440 || CPU_S3C2442
 	help
 	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
 
@@ -72,7 +70,7 @@ config S3C2440_PLL_16934400
 
 config S3C2440_DMA
 	bool
-	depends on ARCH_S3C2410 && CPU_S3C24405B
+	depends on CPU_S3C2440
 	help
 	  Support for S3C2440 specific DMA code5A
 
@@ -181,7 +179,6 @@ config MACH_MINI2440
 	select CPU_S3C2440
 	select EEPROM_AT24
 	select LEDS_TRIGGER_BACKLIGHT
-	select SND_S3C24XX_SOC_S3C24XX_UDA134X
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
 	help
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index b73f78a9da5c..d7086788b1ff 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -498,8 +498,6 @@ static void __init anubis_init(void)
 
 MACHINE_START(ANUBIS, "Simtec-Anubis")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 84725791e6bf..6c98b789b8c6 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -5,7 +5,7 @@
  *      and modifications by SBZ <sbz@spgui.org> and
  *      Weibing <http://weibing.blogbus.com>
  *
- * For product information, visit http://www.arm9e.com/
+ * For product information, visit http://www.arm.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -233,8 +233,6 @@ static void __init at2440evb_init(void)
 
 
 MACHINE_START(AT2440EVB, "AT2440EVB")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 9e39faa283b9..9f2c14ec7181 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -90,24 +90,17 @@
 static struct pcf50633 *gta02_pcf;
 
 /*
- * This gets called every 1ms when we paniced.
+ * This gets called frequently when we paniced.
  */
 
-static long gta02_panic_blink(long count)
+static long gta02_panic_blink(int state)
 {
 	long delay = 0;
-	static long last_blink;
-	static char led;
+	char led;
 
-	/* Fast blink: 200ms period. */
-	if (count - last_blink < 100)
-		return 0;
-
-	led ^= 1;
+	led = (state) ? 1 : 0;
 	gpio_direction_output(GTA02_GPIO_AUX_LED, led);
 
-	last_blink = count;
-
 	return delay;
 }
 
@@ -556,7 +549,7 @@ static void gta02_poweroff(void)
 
 static void __init gta02_machine_init(void)
 {
-	/* Set the panic callback to make AUX LED blink at ~5Hz. */
+	/* Set the panic callback to turn AUX LED on or off. */
 	panic_blink = gta02_panic_blink;
 
 	s3c_pm_init();
@@ -579,8 +572,6 @@ static void __init gta02_machine_init(void)
 
 MACHINE_START(NEO1973_GTA02, "GTA02")
 	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index a76bcda210ad..f62bb4c793bd 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -691,8 +691,6 @@ static void __init mini2440_init(void)
 
 MACHINE_START(MINI2440, "MINI2440")
 	/* Maintainer: Michel Pollet <buserror@gmail.com> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 3ff62de45fde..37dd306fb7dc 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -151,8 +151,6 @@ static void __init nexcoder_init(void)
 
 MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 319458da71a0..14dc67897757 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -455,8 +455,6 @@ static void __init osiris_init(void)
 
 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 8603b577a24b..e0622bbb6dfa 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/memblock.h>
 #include <linux/delay.h>
 #include <linux/timer.h>
 #include <linux/init.h>
@@ -24,8 +25,12 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/sysdev.h>
+#include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/pwm.h>
+#include <linux/s3c_adc_battery.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -54,6 +59,8 @@
 #include <plat/irq.h>
 #include <plat/ts.h>
 
+#include <sound/uda1380.h>
+
 #define LCD_PWM_PERIOD 192960
 #define LCD_PWM_DUTY 127353
 
@@ -126,6 +133,193 @@ static struct s3c2410fb_display rx1950_display = {
 
 };
 
+static int power_supply_init(struct device *dev)
+{
+	return gpio_request(S3C2410_GPF(2), "cable plugged");
+}
+
+static int rx1950_is_ac_online(void)
+{
+	return !gpio_get_value(S3C2410_GPF(2));
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(S3C2410_GPF(2));
+}
+
+static char *rx1950_supplicants[] = {
+	"main-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init			= power_supply_init,
+	.is_ac_online		= rx1950_is_ac_online,
+	.exit			= power_supply_exit,
+	.supplied_to		= rx1950_supplicants,
+	.num_supplicants	= ARRAY_SIZE(rx1950_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+	[0] = {
+			.name	= "ac",
+			.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
+					  IORESOURCE_IRQ_HIGHEDGE,
+			.start	= IRQ_EINT2,
+			.end	= IRQ_EINT2,
+	},
+};
+
+static struct platform_device power_supply = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev			= {
+					.platform_data =
+						&power_supply_info,
+	},
+	.resource		= power_supply_resources,
+	.num_resources		= ARRAY_SIZE(power_supply_resources),
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
+	{ .volt = 4100, .cur = 156, .level = 100},
+	{ .volt = 4050, .cur = 156, .level = 95},
+	{ .volt = 4025, .cur = 141, .level = 90},
+	{ .volt = 3995, .cur = 144, .level = 85},
+	{ .volt = 3957, .cur = 162, .level = 80},
+	{ .volt = 3931, .cur = 147, .level = 75},
+	{ .volt = 3902, .cur = 147, .level = 70},
+	{ .volt = 3863, .cur = 153, .level = 65},
+	{ .volt = 3838, .cur = 150, .level = 60},
+	{ .volt = 3800, .cur = 153, .level = 55},
+	{ .volt = 3765, .cur = 153, .level = 50},
+	{ .volt = 3748, .cur = 172, .level = 45},
+	{ .volt = 3740, .cur = 153, .level = 40},
+	{ .volt = 3714, .cur = 175, .level = 35},
+	{ .volt = 3710, .cur = 156, .level = 30},
+	{ .volt = 3963, .cur = 156, .level = 25},
+	{ .volt = 3672, .cur = 178, .level = 20},
+	{ .volt = 3651, .cur = 178, .level = 15},
+	{ .volt = 3629, .cur = 178, .level = 10},
+	{ .volt = 3612, .cur = 162, .level = 5},
+	{ .volt = 3605, .cur = 162, .level = 0},
+};
+
+static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
+	{ .volt = 4200, .cur = 0, .level = 100},
+	{ .volt = 4190, .cur = 0, .level = 99},
+	{ .volt = 4178, .cur = 0, .level = 95},
+	{ .volt = 4110, .cur = 0, .level = 70},
+	{ .volt = 4076, .cur = 0, .level = 65},
+	{ .volt = 4046, .cur = 0, .level = 60},
+	{ .volt = 4021, .cur = 0, .level = 55},
+	{ .volt = 3999, .cur = 0, .level = 50},
+	{ .volt = 3982, .cur = 0, .level = 45},
+	{ .volt = 3965, .cur = 0, .level = 40},
+	{ .volt = 3957, .cur = 0, .level = 35},
+	{ .volt = 3948, .cur = 0, .level = 30},
+	{ .volt = 3936, .cur = 0, .level = 25},
+	{ .volt = 3927, .cur = 0, .level = 20},
+	{ .volt = 3906, .cur = 0, .level = 15},
+	{ .volt = 3880, .cur = 0, .level = 10},
+	{ .volt = 3829, .cur = 0, .level = 5},
+	{ .volt = 3820, .cur = 0, .level = 0},
+};
+
+int rx1950_bat_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
+	if (ret)
+		goto err_gpio1;
+	ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
+	if (ret)
+		goto err_gpio2;
+
+	return 0;
+
+err_gpio2:
+	gpio_free(S3C2410_GPJ(2));
+err_gpio1:
+	return ret;
+}
+
+void rx1950_bat_exit(void)
+{
+	gpio_free(S3C2410_GPJ(2));
+	gpio_free(S3C2410_GPJ(3));
+}
+
+void rx1950_enable_charger(void)
+{
+	gpio_direction_output(S3C2410_GPJ(2), 1);
+	gpio_direction_output(S3C2410_GPJ(3), 1);
+}
+
+void rx1950_disable_charger(void)
+{
+	gpio_direction_output(S3C2410_GPJ(2), 0);
+	gpio_direction_output(S3C2410_GPJ(3), 0);
+}
+
+static struct gpio_led rx1950_leds_desc[] = {
+	{
+		.name				= "Green",
+		.default_trigger	= "main-battery-charging-or-full",
+		.gpio				= S3C2410_GPA(6),
+	},
+	{
+		.name				= "Red",
+		.default_trigger	= "main-battery-full",
+		.gpio				= S3C2410_GPA(7),
+	},
+	{
+		.name				= "Blue",
+		.default_trigger	= "rx1950-acx-mem",
+		.gpio				= S3C2410_GPA(11),
+	},
+};
+
+static struct gpio_led_platform_data rx1950_leds_pdata = {
+	.num_leds	= ARRAY_SIZE(rx1950_leds_desc),
+	.leds		= rx1950_leds_desc,
+};
+
+static struct platform_device rx1950_leds = {
+	.name	= "leds-gpio",
+	.id		= -1,
+	.dev	= {
+				.platform_data = &rx1950_leds_pdata,
+	},
+};
+
+static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
+	.init = rx1950_bat_init,
+	.exit = rx1950_bat_exit,
+	.enable_charger = rx1950_enable_charger,
+	.disable_charger = rx1950_disable_charger,
+	.gpio_charge_finished = S3C2410_GPF(3),
+	.lut_noac = bat_lut_noac,
+	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
+	.lut_acin = bat_lut_acin,
+	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
+	.volt_channel = 0,
+	.current_channel = 1,
+	.volt_mult = 4235,
+	.current_mult = 2900,
+	.internal_impedance = 200,
+};
+
+static struct platform_device rx1950_battery = {
+	.name             = "s3c-adc-battery",
+	.id               = -1,
+	.dev = {
+		.parent = &s3c_device_adc.dev,
+		.platform_data = &rx1950_bat_cfg,
+	},
+};
+
 static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
 	.displays = &rx1950_display,
 	.num_displays = 1,
@@ -480,11 +674,17 @@ static struct platform_device rx1950_device_gpiokeys = {
 	.dev.platform_data = &rx1950_gpio_keys_data,
 };
 
-static struct s3c2410_platform_i2c rx1950_i2c_data = {
-	.flags = 0,
-	.slave_addr = 0x42,
-	.frequency = 400 * 1000,
-	.sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+static struct uda1380_platform_data uda1380_info = {
+	.gpio_power	= S3C2410_GPJ(0),
+	.gpio_reset	= S3C2410_GPD(0),
+	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
+};
+
+static struct i2c_board_info rx1950_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("uda1380", 0x1a),
+		.platform_data = &uda1380_info,
+	},
 };
 
 static struct platform_device *rx1950_devices[] __initdata = {
@@ -492,6 +692,7 @@ static struct platform_device *rx1950_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
+	&s3c_device_pcm,
 	&s3c_device_usbgadget,
 	&s3c_device_rtc,
 	&s3c_device_nand,
@@ -502,6 +703,9 @@ static struct platform_device *rx1950_devices[] __initdata = {
 	&s3c_device_timer[1],
 	&rx1950_backlight,
 	&rx1950_device_gpiokeys,
+	&power_supply,
+	&rx1950_battery,
+	&rx1950_leds,
 };
 
 static struct clk *rx1950_clocks[] __initdata = {
@@ -537,7 +741,7 @@ static void __init rx1950_init_machine(void)
 	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
 	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
 	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
-	s3c_i2c0_set_platdata(&rx1950_i2c_data);
+	s3c_i2c0_set_platdata(NULL);
 	s3c_nand_set_platdata(&rx1950_nand_info);
 
 	/* Turn off suspend on both USB ports, and switch the
@@ -568,14 +772,23 @@ static void __init rx1950_init_machine(void)
 	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
 
 	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
+
+	i2c_register_board_info(0, rx1950_i2c_devices,
+		ARRAY_SIZE(rx1950_i2c_devices));
+}
+
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx1950_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
 }
 
 MACHINE_START(RX1950, "HP iPAQ RX1950")
     /* Maintainers: Vasily Khoruzhick */
-    .phys_io = S3C2410_PA_UART,
-	.io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params = S3C2410_SDRAM_PA + 0x100,
 	.map_io = rx1950_map_io,
+	.reserve	= rx1950_reserve,
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index d2946de3f365..1472b1a5b2fb 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/memblock.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/tty.h>
@@ -191,6 +192,13 @@ static void __init rx3715_map_io(void)
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
 }
 
+/* H1940 and RX3715 need to reserve this for suspend */
+static void __init rx3715_reserve(void)
+{
+	memblock_reserve(0x30003000, 0x1000);
+	memblock_reserve(0x30081000, 0x1000);
+}
+
 static void __init rx3715_init_irq(void)
 {
 	s3c24xx_init_irq();
@@ -210,10 +218,9 @@ static void __init rx3715_init_machine(void)
 
 MACHINE_START(RX3715, "IPAQ-RX3715")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.map_io		= rx3715_map_io,
+	.reserve	= rx3715_reserve,
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index df83276d85ae..eedfe0f11643 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -175,8 +175,6 @@ static void __init smdk2440_machine_init(void)
 
 MACHINE_START(S3C2440, "SMDK2440")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
index 5e4a97e76533..90c1707b9c95 100644
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -44,6 +44,7 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/pll.h>
+#include <plat/nand-core.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
@@ -68,7 +69,7 @@ void __init s3c244x_map_io(void)
 
 	s3c_device_sdi.name  = "s3c2440-sdi";
 	s3c_device_i2c0.name  = "s3c2440-i2c";
-	s3c_device_nand.name = "s3c2440-nand";
+	s3c_nand_setname("s3c2440-nand");
 	s3c_device_ts.name = "s3c2440-ts";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
 }
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 4c863d3a52f4..4337f0a9960d 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -132,8 +132,6 @@ static void __init smdk2443_machine_init(void)
 
 MACHINE_START(SMDK2443, "SMDK2443")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index ce2ec3298930..33d18dd1ebd5 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -35,6 +35,8 @@
 #include <plat/s3c2443.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/fb-core.h>
+#include <plat/nand-core.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -61,7 +63,8 @@ int __init s3c2443_init(void)
 
 	s3c24xx_reset_hook = s3c2443_hard_reset;
 
-	s3c_device_nand.name = "s3c2412-nand";
+	s3c_nand_setname("s3c2412-nand");
+	s3c_fb_setname("s3c2443-fb");
 
 	/* change WDT IRQ number */
 	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
index 239476b81f3b..0c5a73805560 100644
--- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
@@ -10,13 +10,12 @@
 #include <mach/map.h>
 #include <plat/regs-serial.h>
 
-	.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C24XX_PA_UART
-		ldrne	\rx, = S3C24XX_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C24XX_PA_UART
+		ldr	\rv, = S3C24XX_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
index 914656820794..6480b15277f3 100644
--- a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h
@@ -12,6 +12,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xe0000000UL)
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index f5a59727949f..1ca7bdc6485c 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -57,11 +57,21 @@ config S3C64XX_SETUP_I2C1
 	help
 	  Common setup code for i2c bus 1.
 
+config S3C64XX_SETUP_IDE
+	bool
+	help
+	  Common setup code for S3C64XX IDE.
+
 config S3C64XX_SETUP_FB_24BPP
 	bool
 	help
 	  Common setup code for S3C64XX with an 24bpp RGB display helper.
 
+config S3C64XX_SETUP_KEYPAD
+	bool
+	help
+	  Common setup code for S3C64XX KEYPAD GPIO configurations
+
 config S3C64XX_SETUP_SDHCI_GPIO
 	bool
 	help
@@ -88,6 +98,36 @@ config MACH_ANW6410
 	help
 	  Machine support for the A&W6410
 
+config MACH_MINI6410
+	bool "MINI6410"
+	select CPU_S3C6410
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	help
+	  Machine support for the FriendlyARM MINI6410
+
+config MACH_REAL6410
+	bool "REAL6410"
+	select CPU_S3C6410
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_NAND
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select S3C_DEV_USB_HOST
+	help
+	  Machine support for the CoreWind REAL6410
+
 config MACH_SMDK6410
 	bool "SMDK6410"
 	select CPU_S3C6410
@@ -95,15 +135,20 @@ config MACH_SMDK6410
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
+	select SAMSUNG_DEV_IDE
 	select S3C_DEV_FB
+	select S3C_DEV_RTC
 	select SAMSUNG_DEV_TS
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
+	select SAMSUNG_DEV_KEYPAD
 	select HAVE_S3C2410_WATCHDOG
 	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_IDE
 	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_KEYPAD
 	help
 	  Machine support for the Samsung SMDK6410
 
@@ -161,6 +206,7 @@ config SMDK6410_WM1192_EV1
 	select REGULATOR_WM831X
 	select S3C24XX_GPIO_EXTRA64
 	select MFD_WM831X
+	select MFD_WM831X_I2C
 	help
 	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
 	  daughtercard for the Samsung SMDK6410 reference platform.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 9d1006938f5c..4657363f0674 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -35,6 +35,8 @@ obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
@@ -50,6 +52,8 @@ obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_REAL6410)     += mach-real6410.o
+obj-$(CONFIG_MACH_MINI6410)     += mach-mini6410.o
 obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
 obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
 obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index fbd85a9b7bbf..7e03f0ae2fc8 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -133,6 +133,12 @@ static struct clk init_clocks_disable[] = {
 		.id		= -1,
 		.parent		= &clk_h,
 	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
+	}, {
 		.name		= "adc",
 		.id		= -1,
 		.parent		= &clk_p,
@@ -165,6 +171,12 @@ static struct clk init_clocks_disable[] = {
 		.ctrlbit	= S3C6410_CLKCON_PCLK_IIS2,
 	}, {
 #endif
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_KEYPAD,
+	}, {
 		.name		= "spi",
 		.id		= 0,
 		.parent		= &clk_p,
@@ -295,12 +307,6 @@ static struct clk init_clocks[] = {
 		.enable		= s3c64xx_pclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
 	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c64xx_pclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
-	}, {
 		.name		= "watchdog",
 		.id		= -1,
 		.parent		= &clk_p,
@@ -310,6 +316,12 @@ static struct clk init_clocks[] = {
 		.id		= -1,
 		.parent		= &clk_p,
 		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
+	}, {
+		.name		= "cfcon",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_IHOST,
 	}
 };
 
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index c3e9e73bd0f9..76426a32c013 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -12,54 +12,44 @@
 #include <linux/string.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <mach/irqs.h>
 #include <mach/map.h>
 #include <mach/dma.h>
-#include <mach/gpio.h>
 
 #include <plat/devs.h>
 #include <plat/audio.h>
 #include <plat/gpio-cfg.h>
 
-#include <mach/gpio-bank-c.h>
-#include <mach/gpio-bank-d.h>
-#include <mach/gpio-bank-e.h>
-#include <mach/gpio-bank-h.h>
-
 static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
-		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
+		base = S3C64XX_GPD(0);
 		break;
 	case 1:
-		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
-		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
+		base = S3C64XX_GPE(0);
+		break;
 	default:
-		printk(KERN_DEBUG "Invalid I2S Controller number!");
+		printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
+			pdev->id);
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
+
 	return 0;
 }
 
 static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
-	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
-	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
-	s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
+	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
+	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
+	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
+	s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
 
 	return 0;
 }
@@ -168,26 +158,22 @@ EXPORT_SYMBOL(s3c64xx_device_iisv4);
 
 static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+		base = S3C64XX_GPD(0);
 		break;
 	case 1:
-		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+		base = S3C64XX_GPE(0);
 		break;
 	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
+			pdev->id);
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
 	return 0;
 }
 
@@ -261,24 +247,12 @@ EXPORT_SYMBOL(s3c64xx_device_pcm1);
 
 static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET);
-	s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC);
-	s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI);
-	s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO);
-
-	return 0;
+	return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
 }
 
 static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET);
-	s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC);
-	s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI);
-	s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO);
-
-	return 0;
+	return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
 }
 
 static struct resource s3c64xx_ac97_resource[] = {
@@ -333,3 +307,16 @@ void __init s3c64xx_ac97_setup_gpio(int num)
 	else
 		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
 }
+
+static u64 s3c_device_audio_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_pcm = {
+	.name		  = "s3c24xx-pcm-audio",
+	.id		  = -1,
+	.dev              = {
+		.dma_mask = &s3c_device_audio_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+EXPORT_SYMBOL(s3c_device_pcm);
+
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 29c32d088515..405e62128917 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -12,16 +12,17 @@
 #include <linux/string.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
-#include <mach/gpio.h>
 #include <mach/gpio-bank-c.h>
 #include <mach/spi-clocks.h>
+#include <mach/irqs.h>
 
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
-#include <plat/irqs.h>
+#include <plat/devs.h>
 
 static char *spi_src_clks[] = {
 	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index 5567e037b0d1..e7d03ab41d80 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -697,7 +697,7 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
 		chptr->number = chno;
 		chptr->dmac = dmac;
 		chptr->regs = regptr;
-		regptr += PL008_Cx_STRIDE;
+		regptr += PL080_Cx_STRIDE;
 	}
 
 	/* for the moment, permanently enable the controller */
diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
index 60c929a3cab6..fd99a82e82c4 100644
--- a/arch/arm/mach-s3c64xx/gpiolib.c
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -15,9 +15,9 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
 #include <mach/map.h>
-#include <mach/gpio.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -195,11 +195,6 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
 	.get_pull	= s3c_gpio_getpull_updown,
 };
 
-int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
-{
-	return IRQ_EINT(0) + pin;
-}
-
 static struct s3c_gpio_chip gpio_2bit[] = {
 	{
 		.base	= S3C64XX_GPF_BASE,
@@ -227,12 +222,13 @@ static struct s3c_gpio_chip gpio_2bit[] = {
 		},
 	}, {
 		.base	= S3C64XX_GPN_BASE,
+		.irq_base = IRQ_EINT(0),
 		.config	= &gpio_2bit_cfg_eint10,
 		.chip	= {
 			.base	= S3C64XX_GPN(0),
 			.ngpio	= S3C64XX_GPIO_N_NR,
 			.label	= "GPN",
-			.to_irq = s3c64xx_gpio2int_gpn,
+			.to_irq = samsung_gpiolib_to_irq,
 		},
 	}, {
 		.base	= S3C64XX_GPO_BASE,
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index f9ab5d26052a..a29e70550c70 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,13 +21,12 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index e1eab3c94aea..a1f13f02c841 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -67,6 +67,7 @@
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_RTC		(0x7E005000)
+#define S3C64XX_PA_KEYPAD	(0x7E00A000)
 #define S3C64XX_PA_ADC		(0x7E00B000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
 #define S3C64XX_PA_AC97		(0x7F001000)
@@ -86,6 +87,9 @@
 #define S3C64XX_SZ_GPIO		SZ_4K
 
 #define S3C64XX_PA_SDRAM	(0x50000000)
+
+#define S3C64XX_PA_CFCON	(0x70300000)
+
 #define S3C64XX_PA_VIC0		(0x71200000)
 #define S3C64XX_PA_VIC1		(0x71300000)
 
@@ -120,5 +124,7 @@
 #define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
 
 #define SAMSUNG_PA_ADC		S3C64XX_PA_ADC
+#define SAMSUNG_PA_CFCON	S3C64XX_PA_CFCON
+#define SAMSUNG_PA_KEYPAD	S3C64XX_PA_KEYPAD
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
index a3ac84a65480..42cc54e2ee30 100644
--- a/arch/arm/mach-s3c64xx/include/mach/memory.h
+++ b/arch/arm/mach-s3c64xx/include/mach/memory.h
@@ -15,4 +15,6 @@
 
 #define PHYS_OFFSET     UL(0x50000000)
 
+#define CONSISTENT_DMA_SIZE	SZ_8M
+
 #endif
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index 0114eb0c1fe7..05332b998ec0 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -34,6 +34,7 @@
 #define S3C_SCLK_GATE		S3C_CLKREG(0x38)
 #define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
 #define S3C6410_CLK_SRC2	S3C_CLKREG(0x10C)
+#define S3C_MEM_SYS_CFG		S3C_CLKREG(0x120)
 
 /* CLKDIV0 */
 #define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
@@ -154,4 +155,8 @@
 #define S3C6400_CLKSRC_EPLL_MOUT_SHIFT	(2)
 #define S3C6400_CLKSRC_MFC		(1 << 4)
 
+/* MEM_SYS_CFG */
+#define MEM_SYS_CFG_INDEP_CF		0x4000
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON	0x30
+
 #endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-fb.h b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
index f56611526c63..a06ee0af9a4b 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
@@ -18,24 +18,4 @@
 
 #include <plat/regs-fb-v4.h>
 
-/* Palette registers */
-#define WIN2_PAL(_entry)			(0x300 + ((_entry) * 2))
-#define WIN3_PAL(_entry)			(0x320 + ((_entry) * 2))
-#define WIN4_PAL(_entry)			(0x340 + ((_entry) * 2))
-#define WIN0_PAL(_entry)			(0x400 + ((_entry) * 4))
-#define WIN1_PAL(_entry)			(0x800 + ((_entry) * 4))
-
-static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
-{
-	switch (window) {
-	case 0: return WIN0_PAL(reg);
-	case 1: return WIN1_PAL(reg);
-	case 2: return WIN2_PAL(reg);
-	case 3: return WIN3_PAL(reg);
-	case 4: return WIN4_PAL(reg);
-	}
-
-	BUG();
-}
-
 #endif /* __ASM_ARCH_MACH_REGS_FB_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
index 7411ef3711a6..23f75e556a30 100644
--- a/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
@@ -15,6 +15,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 4a0bb243d14a..a53cf149476e 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -134,7 +134,6 @@ static struct platform_device anw6410_lcd_powerdev = {
 static struct s3c_fb_pd_win anw6410_fb_win0 = {
 	/* this is to ensure we use win0 */
 	.win_mode	= {
-		.pixclock	= 41094,
 		.left_margin	= 8,
 		.right_margin	= 13,
 		.upper_margin	= 7,
@@ -234,8 +233,6 @@ static void __init anw6410_machine_init(void)
 
 MACHINE_START(ANW6410, "A&W6410")
 	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 
 	.init_irq	= s3c6410_init_irq,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 187441a78dd5..b2639582caca 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -128,7 +128,6 @@ static struct platform_device hmt_backlight_device = {
 
 static struct s3c_fb_pd_win hmt_fb_win0 = {
 	.win_mode	= {
-		.pixclock	= 41094,
 		.left_margin	= 8,
 		.right_margin	= 13,
 		.upper_margin	= 7,
@@ -266,8 +265,6 @@ static void __init hmt_machine_init(void)
 
 MACHINE_START(HMT, "Airgoo-HMT")
 	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= hmt_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
new file mode 100644
index 000000000000..249c62956471
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -0,0 +1,357 @@
+/* linux/arch/arm/mach-s3c64xx/mach-mini6410.c
+ *
+ * Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/dm9000.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/serial_core.h>
+#include <linux/types.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+#include <mach/regs-srom.h>
+#include <mach/s3c6410.h>
+
+#include <plat/adc.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+#include <plat/regs-serial.h>
+#include <plat/ts.h>
+
+#include <video/platform_lcd.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	= 0,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[1] = {
+		.hwport	= 1,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[2] = {
+		.hwport	= 2,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[3] = {
+		.hwport	= 3,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource mini6410_dm9k_resource[] = {
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN1,
+		.end	= S3C64XX_PA_XM0CSN1 + 1,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= S3C64XX_PA_XM0CSN1 + 4,
+		.end	= S3C64XX_PA_XM0CSN1 + 5,
+		.flags	= IORESOURCE_MEM
+	},
+	[2] = {
+		.start	= S3C_EINT(7),
+		.end	= S3C_EINT(7),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
+	}
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device mini6410_device_eth = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(mini6410_dm9k_resource),
+	.resource	= mini6410_dm9k_resource,
+	.dev		= {
+		.platform_data	= &mini6410_dm9k_pdata,
+	},
+};
+
+static struct mtd_partition mini6410_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_1M,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[2] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set mini6410_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(mini6410_nand_part),
+		.partitions	= mini6410_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand mini6410_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(mini6410_nand_sets),
+	.sets		= mini6410_nand_sets,
+};
+
+static struct s3c_fb_pd_win mini6410_fb_win[] = {
+	{
+		.win_mode	= {	/* 4.3" 480x272 */
+			.left_margin	= 3,
+			.right_margin	= 2,
+			.upper_margin	= 1,
+			.lower_margin	= 1,
+			.hsync_len	= 40,
+			.vsync_len	= 1,
+			.xres		= 480,
+			.yres		= 272,
+		},
+		.max_bpp	= 32,
+		.default_bpp	= 16,
+	}, {
+		.win_mode	= {	/* 7.0" 800x480 */
+			.left_margin	= 8,
+			.right_margin	= 13,
+			.upper_margin	= 7,
+			.lower_margin	= 5,
+			.hsync_len	= 3,
+			.vsync_len	= 1,
+			.xres		= 800,
+			.yres		= 480,
+		},
+		.max_bpp	= 32,
+		.default_bpp	= 16,
+	},
+};
+
+static struct s3c_fb_platdata mini6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &mini6410_fb_win[0],
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(S3C64XX_GPE(0), 1);
+	else
+		gpio_direction_output(S3C64XX_GPE(0), 0);
+}
+
+static struct plat_lcd_data mini6410_lcd_power_data = {
+	.set_power	= mini6410_lcd_power_set,
+};
+
+static struct platform_device mini6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &mini6410_lcd_power_data,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+static struct platform_device *mini6410_devices[] __initdata = {
+	&mini6410_device_eth,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_ohci,
+	&s3c_device_nand,
+	&s3c_device_fb,
+	&mini6410_lcd_powerdev,
+	&s3c_device_adc,
+	&s3c_device_ts,
+};
+
+static void __init mini6410_map_io(void)
+{
+	u32 tmp;
+
+	s3c64xx_init_io(NULL, 0);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * mini6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char mini6410_features_str[12] __initdata = "0";
+
+static int __init mini6410_features_setup(char *str)
+{
+	if (str)
+		strlcpy(mini6410_features_str, str,
+			sizeof(mini6410_features_str));
+	return 1;
+}
+
+__setup("mini6410=", mini6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct mini6410_features_t {
+	int done;
+	int lcd_index;
+};
+
+static void mini6410_parse_features(
+		struct mini6410_features_t *features,
+		const char *features_str)
+{
+	const char *fp = features_str;
+
+	features->done = 0;
+	features->lcd_index = 0;
+
+	while (*fp) {
+		char f = *fp++;
+
+		switch (f) {
+		case '0'...'9':	/* tft screen */
+			if (features->done & FEATURE_SCREEN) {
+				printk(KERN_INFO "MINI6410: '%c' ignored, "
+					"screen type already set\n", f);
+			} else {
+				int li = f - '0';
+				if (li >= ARRAY_SIZE(mini6410_fb_win))
+					printk(KERN_INFO "MINI6410: '%c' out "
+						"of range LCD mode\n", f);
+				else {
+					features->lcd_index = li;
+				}
+			}
+			features->done |= FEATURE_SCREEN;
+			break;
+		}
+	}
+}
+
+static void __init mini6410_machine_init(void)
+{
+	u32 cs1;
+	struct mini6410_features_t features = { 0 };
+
+	printk(KERN_INFO "MINI6410: Option string mini6410=%s\n",
+			mini6410_features_str);
+
+	/* Parse the feature string */
+	mini6410_parse_features(&features, mini6410_features_str);
+
+	mini6410_lcd_pdata.win[0] = &mini6410_fb_win[features.lcd_index];
+
+	printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
+		mini6410_lcd_pdata.win[0]->win_mode.xres,
+		mini6410_lcd_pdata.win[0]->win_mode.yres);
+
+	s3c_nand_set_platdata(&mini6410_nand_info);
+	s3c_fb_set_platdata(&mini6410_lcd_pdata);
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	/* configure nCS1 width to 16 bits */
+
+	cs1 = __raw_readl(S3C64XX_SROM_BW) &
+		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+			S3C64XX_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S3C64XX_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+
+	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+	gpio_request(S3C64XX_GPF(15), "LCD power");
+	gpio_request(S3C64XX_GPE(0), "LCD power");
+
+	platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
+}
+
+MACHINE_START(MINI6410, "MINI6410")
+	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= mini6410_map_io,
+	.init_machine	= mini6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index bf65747ea68e..c4986498cd12 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -97,8 +97,6 @@ static void __init ncp_machine_init(void)
 
 MACHINE_START(NCP, "NCP")
 	/* Maintainer: Samsung Electronics */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= ncp_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
new file mode 100644
index 000000000000..f9ef9b5c5f5a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -0,0 +1,338 @@
+/* linux/arch/arm/mach-s3c64xx/mach-real6410.c
+ *
+ * Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/dm9000.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/types.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+#include <mach/regs-srom.h>
+#include <mach/s3c6410.h>
+
+#include <plat/adc.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+#include <plat/regs-serial.h>
+#include <plat/ts.h>
+
+#include <video/platform_lcd.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	= 0,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[1] = {
+		.hwport	= 1,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[2] = {
+		.hwport	= 2,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[3] = {
+		.hwport	= 3,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource real6410_dm9k_resource[] = {
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN1,
+		.end	= S3C64XX_PA_XM0CSN1 + 1,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= S3C64XX_PA_XM0CSN1 + 4,
+		.end	= S3C64XX_PA_XM0CSN1 + 5,
+		.flags	= IORESOURCE_MEM
+	},
+	[2] = {
+		.start	= S3C_EINT(7),
+		.end	= S3C_EINT(7),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
+	}
+};
+
+static struct dm9000_plat_data real6410_dm9k_pdata = {
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device real6410_device_eth = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(real6410_dm9k_resource),
+	.resource	= real6410_dm9k_resource,
+	.dev		= {
+		.platform_data	= &real6410_dm9k_pdata,
+	},
+};
+
+static struct s3c_fb_pd_win real6410_fb_win[] = {
+	{
+		.win_mode	= {	/* 4.3" 480x272 */
+			.left_margin	= 3,
+			.right_margin	= 2,
+			.upper_margin	= 1,
+			.lower_margin	= 1,
+			.hsync_len	= 40,
+			.vsync_len	= 1,
+			.xres		= 480,
+			.yres		= 272,
+		},
+		.max_bpp	= 32,
+		.default_bpp	= 16,
+	}, {
+		.win_mode	= {	/* 7.0" 800x480 */
+			.left_margin	= 8,
+			.right_margin	= 13,
+			.upper_margin	= 7,
+			.lower_margin	= 5,
+			.hsync_len	= 3,
+			.vsync_len	= 1,
+			.xres		= 800,
+			.yres		= 480,
+		},
+		.max_bpp	= 32,
+		.default_bpp	= 16,
+	},
+};
+
+static struct s3c_fb_platdata real6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &real6410_fb_win[0],
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition real6410_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_1M,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[2] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set real6410_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(real6410_nand_part),
+		.partitions	= real6410_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand real6410_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(real6410_nand_sets),
+	.sets		= real6410_nand_sets,
+};
+
+static struct platform_device *real6410_devices[] __initdata = {
+	&real6410_device_eth,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_fb,
+	&s3c_device_nand,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&s3c_device_ohci,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+static void __init real6410_map_io(void)
+{
+	u32 tmp;
+
+	s3c64xx_init_io(NULL, 0);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * real6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char real6410_features_str[12] __initdata = "0";
+
+static int __init real6410_features_setup(char *str)
+{
+	if (str)
+		strlcpy(real6410_features_str, str,
+			sizeof(real6410_features_str));
+	return 1;
+}
+
+__setup("real6410=", real6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct real6410_features_t {
+	int done;
+	int lcd_index;
+};
+
+static void real6410_parse_features(
+		struct real6410_features_t *features,
+		const char *features_str)
+{
+	const char *fp = features_str;
+
+	features->done = 0;
+	features->lcd_index = 0;
+
+	while (*fp) {
+		char f = *fp++;
+
+		switch (f) {
+		case '0'...'9':	/* tft screen */
+			if (features->done & FEATURE_SCREEN) {
+				printk(KERN_INFO "REAL6410: '%c' ignored, "
+					"screen type already set\n", f);
+			} else {
+				int li = f - '0';
+				if (li >= ARRAY_SIZE(real6410_fb_win))
+					printk(KERN_INFO "REAL6410: '%c' out "
+						"of range LCD mode\n", f);
+				else {
+					features->lcd_index = li;
+				}
+			}
+			features->done |= FEATURE_SCREEN;
+			break;
+		}
+	}
+}
+
+static void __init real6410_machine_init(void)
+{
+	u32 cs1;
+	struct real6410_features_t features = { 0 };
+
+	printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
+			real6410_features_str);
+
+	/* Parse the feature string */
+	real6410_parse_features(&features, real6410_features_str);
+
+	real6410_lcd_pdata.win[0] = &real6410_fb_win[features.lcd_index];
+
+	printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
+		real6410_lcd_pdata.win[0]->win_mode.xres,
+		real6410_lcd_pdata.win[0]->win_mode.yres);
+
+	s3c_fb_set_platdata(&real6410_lcd_pdata);
+	s3c_nand_set_platdata(&real6410_nand_info);
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	/* configure nCS1 width to 16 bits */
+
+	cs1 = __raw_readl(S3C64XX_SROM_BW) &
+		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+			S3C64XX_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S3C64XX_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+
+	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+	gpio_request(S3C64XX_GPF(15), "LCD power");
+
+	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
+}
+
+MACHINE_START(REAL6410, "REAL6410")
+	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= real6410_map_io,
+	.init_machine	= real6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 028d080dcd35..cb1ebeb08763 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
 #include <linux/serial_core.h>
+#include <linux/spi/spi_gpio.h>
 #include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
@@ -135,7 +136,7 @@ static struct platform_device smartq_usb_otg_vbus_dev = {
 	.dev.platform_data	= &smartq_usb_otg_vbus_pdata,
 };
 
-static int __init smartq_bl_init(struct device *dev)
+static int smartq_bl_init(struct device *dev)
 {
     s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
 
@@ -166,7 +167,7 @@ static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
 
 static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
 	.max_width		= 4,
-	/*.broken_card_detection	= true,*/
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 
 static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
@@ -184,6 +185,33 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
 	},
 };
 
+static int __init smartq_lcd_setup_gpio(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPM(3), "LCD power");
+	if (ret < 0)
+		return ret;
+
+	/* turn power off */
+	gpio_direction_output(S3C64XX_GPM(3), 0);
+
+	return 0;
+}
+
+/* GPM0 -> CS */
+static struct spi_gpio_platform_data smartq_lcd_control = {
+	.sck			= S3C64XX_GPM(1),
+	.mosi			= S3C64XX_GPM(2),
+	.miso			= S3C64XX_GPM(2),
+};
+
+static struct platform_device smartq_lcd_control_device = {
+	.name			= "spi-gpio",
+	.id			= 1,
+	.dev.platform_data	= &smartq_lcd_control,
+};
+
 static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
 {
 	gpio_direction_output(S3C64XX_GPM(3), power);
@@ -199,6 +227,9 @@ static struct platform_device smartq_lcd_power_device = {
 	.dev.platform_data	= &smartq_lcd_power_data,
 };
 
+static struct i2c_board_info smartq_i2c_devs[] __initdata = {
+	{ I2C_BOARD_INFO("wm8987", 0x1a), },
+};
 
 static struct platform_device *smartq_devices[] __initdata = {
 	&s3c_device_hsmmc1,	/* Init iNAND first, ... */
@@ -213,7 +244,9 @@ static struct platform_device *smartq_devices[] __initdata = {
 	&s3c_device_timer[1],
 	&s3c_device_ts,
 	&s3c_device_usb_hsotg,
+	&s3c64xx_device_iis0,
 	&smartq_backlight_device,
+	&smartq_lcd_control_device,
 	&smartq_lcd_power_device,
 	&smartq_usb_otg_vbus_dev,
 };
@@ -252,7 +285,6 @@ static int __init smartq_power_off_init(void)
 	/* leave power on */
 	gpio_direction_output(S3C64XX_GPK(15), 0);
 
-
 	pm_power_off = smartq_power_off;
 
 	return ret;
@@ -354,6 +386,10 @@ void __init smartq_machine_init(void)
 	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
 	s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
 
+	i2c_register_board_info(0, smartq_i2c_devs,
+				ARRAY_SIZE(smartq_i2c_devs));
+
+	WARN_ON(smartq_lcd_setup_gpio());
 	WARN_ON(smartq_power_off_init());
 	WARN_ON(smartq_usb_host_init());
 	WARN_ON(smartq_usb_otg_init());
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 1d0326ead90f..3a3e5acde523 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -12,7 +12,6 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
-#include <linux/i2c-gpio.h>
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/leds.h>
@@ -33,32 +32,7 @@
 
 #include "mach-smartq.h"
 
-static void __init smartq5_lcd_setup_gpio(void)
-{
-	gpio_request(S3C64XX_GPM(0), "LCD SCEN pin");
-	gpio_request(S3C64XX_GPM(1), "LCD SCL pin");
-	gpio_request(S3C64XX_GPM(2), "LCD SDA pin");
-	gpio_request(S3C64XX_GPM(3), "LCD power");
-
-	/* turn power off */
-	gpio_direction_output(S3C64XX_GPM(0), 1);
-	gpio_direction_input(S3C64XX_GPM(1));
-	gpio_direction_input(S3C64XX_GPM(2));
-	gpio_direction_output(S3C64XX_GPM(3), 0);
-}
-
-static struct i2c_gpio_platform_data smartq5_lcd_control = {
-	.sda_pin		= S3C64XX_GPM(2),
-	.scl_pin		= S3C64XX_GPM(1),
-};
-
-static struct platform_device smartq5_lcd_control_device = {
-	.name			= "i2c-gpio",
-	.id			= 1,
-	.dev.platform_data	= &smartq5_lcd_control,
-};
-
-static struct gpio_led smartq5_leds[] __initdata = {
+static struct gpio_led smartq5_leds[] = {
 	{
 		.name			= "smartq5:green",
 		.active_low		= 1,
@@ -134,16 +108,15 @@ static struct platform_device smartq5_buttons_device  = {
 
 static struct s3c_fb_pd_win smartq5_fb_win0 = {
 	.win_mode	= {
-		.pixclock	= 1000000000000ULL /
-				((40+1+216+800)*(10+1+35+480)*80),
-		.left_margin	= 40,
-		.right_margin	= 216,
-		.upper_margin	= 10,
-		.lower_margin	= 35,
+		.left_margin	= 216,
+		.right_margin	= 40,
+		.upper_margin	= 35,
+		.lower_margin	= 10,
 		.hsync_len	= 1,
 		.vsync_len	= 1,
 		.xres		= 800,
 		.yres		= 480,
+		.refresh	= 80,
 	},
 	.max_bpp	= 32,
 	.default_bpp	= 16,
@@ -160,7 +133,6 @@ static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
 static struct platform_device *smartq5_devices[] __initdata = {
 	&smartq5_leds_device,
 	&smartq5_buttons_device,
-	&smartq5_lcd_control_device,
 };
 
 static void __init smartq5_machine_init(void)
@@ -168,15 +140,12 @@ static void __init smartq5_machine_init(void)
 	s3c_fb_set_platdata(&smartq5_lcd_pdata);
 
 	smartq_machine_init();
-	smartq5_lcd_setup_gpio();
 
 	platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
 }
 
 MACHINE_START(SMARTQ5, "SmartQ 5")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index e0bc78ecb156..e65375877d53 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -12,7 +12,6 @@
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
-#include <linux/i2c-gpio.h>
 #include <linux/init.h>
 #include <linux/input.h>
 #include <linux/leds.h>
@@ -33,32 +32,7 @@
 
 #include "mach-smartq.h"
 
-static void __init smartq7_lcd_setup_gpio(void)
-{
-	gpio_request(S3C64XX_GPM(0), "LCD CSB pin");
-	gpio_request(S3C64XX_GPM(3), "LCD power");
-	gpio_request(S3C64XX_GPM(4), "LCD power status");
-
-	/* turn power off */
-	gpio_direction_output(S3C64XX_GPM(0), 1);
-	gpio_direction_output(S3C64XX_GPM(3), 0);
-	gpio_direction_input(S3C64XX_GPM(4));
-}
-
-static struct i2c_gpio_platform_data smartq7_lcd_control = {
-	.sda_pin		= S3C64XX_GPM(2),
-	.scl_pin		= S3C64XX_GPM(1),
-	.sda_is_open_drain	= 1,
-	.scl_is_open_drain	= 1,
-};
-
-static struct platform_device smartq7_lcd_control_device = {
-	.name			= "i2c-gpio",
-	.id			= 1,
-	.dev.platform_data	= &smartq7_lcd_control,
-};
-
-static struct gpio_led smartq7_leds[] __initdata = {
+static struct gpio_led smartq7_leds[] = {
 	{
 		.name			= "smartq7:red",
 		.active_low		= 1,
@@ -150,8 +124,6 @@ static struct platform_device smartq7_buttons_device  = {
 
 static struct s3c_fb_pd_win smartq7_fb_win0 = {
 	.win_mode	= {
-		.pixclock	= 1000000000000ULL /
-				((3+10+5+800)*(1+3+20+480)*80),
 		.left_margin	= 3,
 		.right_margin	= 5,
 		.upper_margin	= 1,
@@ -160,6 +132,7 @@ static struct s3c_fb_pd_win smartq7_fb_win0 = {
 		.vsync_len	= 3,
 		.xres		= 800,
 		.yres		= 480,
+		.refresh	= 80,
 	},
 	.max_bpp	= 32,
 	.default_bpp	= 16,
@@ -176,7 +149,6 @@ static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
 static struct platform_device *smartq7_devices[] __initdata = {
 	&smartq7_leds_device,
 	&smartq7_buttons_device,
-	&smartq7_lcd_control_device,
 };
 
 static void __init smartq7_machine_init(void)
@@ -184,15 +156,12 @@ static void __init smartq7_machine_init(void)
 	s3c_fb_set_platdata(&smartq7_lcd_pdata);
 
 	smartq_machine_init();
-	smartq7_lcd_setup_gpio();
 
 	platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
 }
 
 MACHINE_START(SMARTQ7, "SmartQ 7")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 59916676d8d2..3cca642f1e6d 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -85,8 +85,6 @@ static void __init smdk6400_machine_init(void)
 
 MACHINE_START(SMDK6400, "SMDK6400")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 
 	.init_irq	= s3c6400_init_irq,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d9a03555f88b..77488facfe4c 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/input.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -56,6 +57,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-sys.h>
 #include <mach/regs-srom.h>
+#include <plat/ata.h>
 #include <plat/iic.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
@@ -66,6 +68,7 @@
 #include <plat/cpu.h>
 #include <plat/adc.h>
 #include <plat/ts.h>
+#include <plat/keypad.h>
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -141,7 +144,6 @@ static struct platform_device smdk6410_lcd_powerdev = {
 static struct s3c_fb_pd_win smdk6410_fb_win0 = {
 	/* this is to ensure we use win0 */
 	.win_mode	= {
-		.pixclock	= 41094,
 		.left_margin	= 8,
 		.right_margin	= 13,
 		.upper_margin	= 7,
@@ -153,6 +155,8 @@ static struct s3c_fb_pd_win smdk6410_fb_win0 = {
 	},
 	.max_bpp	= 32,
 	.default_bpp	= 16,
+	.virtual_y	= 480 * 2,
+	.virtual_x	= 800,
 };
 
 /* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
@@ -242,6 +246,29 @@ static struct platform_device smdk6410_b_pwr_5v = {
 };
 #endif
 
+static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
+	.setup_gpio	= s3c64xx_ide_setup_gpio,
+};
+
+static uint32_t smdk6410_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
+	.keymap		= smdk6410_keymap,
+	.keymap_size	= ARRAY_SIZE(smdk6410_keymap),
+};
+
+static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
+	.keymap_data	= &smdk6410_keymap_data,
+	.rows		= 2,
+	.cols		= 8,
+};
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -256,7 +283,9 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_ohci,
 	&s3c_device_usb_hsotg,
+	&s3c_device_pcm,
 	&s3c64xx_device_iisv4,
+	&samsung_device_keypad,
 
 #ifdef CONFIG_REGULATOR
 	&smdk6410_b_pwr_5v,
@@ -265,6 +294,8 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 
 	&smdk6410_smsc911x,
 	&s3c_device_adc,
+	&s3c_device_cfcon,
+	&s3c_device_rtc,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 };
@@ -636,6 +667,8 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
 
+	samsung_keypad_set_platdata(&smdk6410_keypad_data);
+
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
 
 	/* configure nCS1 width to 16 bits */
@@ -665,13 +698,13 @@ static void __init smdk6410_machine_init(void)
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
+	s3c_ide_set_platdata(&smdk6410_ide_pdata);
+
 	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
 }
 
 MACHINE_START(SMDK6410, "SMDK6410")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
 
 	.init_irq	= s3c6410_init_irq,
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 014401c39f36..312aa6b115e8 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -37,8 +37,9 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/sdhci.h>
+#include <plat/ata-core.h>
+#include <plat/adc-core.h>
 #include <plat/iic-core.h>
-#include <plat/adc.h>
 #include <plat/onenand-core.h>
 #include <mach/s3c6400.h>
 #include <mach/s3c6410.h>
@@ -54,10 +55,11 @@ void __init s3c6410_map_io(void)
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
 
-	s3c_device_adc.name	= "s3c64xx-adc";
+	s3c_adc_setname("s3c64xx-adc");
 	s3c_device_nand.name = "s3c6400-nand";
 	s3c_onenand_setname("s3c6410-onenand");
 	s3c64xx_onenand1_setname("s3c6410-onenand");
+	s3c_cfcon_setname("s3c64xx-pata");
 }
 
 void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
index 8e28e448dd20..8f3091182f9c 100644
--- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
+++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
@@ -15,23 +15,14 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/fb.h>
+#include <linux/gpio.h>
 
 #include <mach/regs-fb.h>
-#include <mach/gpio.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
 extern void s3c64xx_fb_gpio_setup_24bpp(void)
 {
-	unsigned int gpio;
-
-	for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
 }
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
index d1b11e6e77e8..406192a43c6e 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -14,10 +14,10 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio.h>
 #include <mach/gpio-bank-b.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
index 2dce57d8c6f8..1ee62c97cd7f 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -14,10 +14,10 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio.h>
 #include <mach/gpio-bank-b.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c
new file mode 100644
index 000000000000..41b425602d88
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-ide.c
@@ -0,0 +1,43 @@
+/* linux/arch/arm/mach-s3c64xx/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S3C64XX setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+#include <plat/ata.h>
+
+void s3c64xx_ide_setup_gpio(void)
+{
+	u32 reg;
+
+	reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
+
+	/* Independent CF interface, CF chip select configuration */
+	writel(reg | MEM_SYS_CFG_INDEP_CF |
+		MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
+
+	s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
+
+	/* Set XhiDATA[15:0] pins as CF Data[15:0] */
+	s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5));
+
+	/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
+	s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6));
+
+	/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
+	s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
+	s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6));
+}
diff --git a/arch/arm/mach-s3c64xx/setup-keypad.c b/arch/arm/mach-s3c64xx/setup-keypad.c
new file mode 100644
index 000000000000..f8ed0d22db70
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-keypad.c
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s3c64xx/setup-keypad.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * GPIO configuration for S3C64XX KeyPad device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/keypad.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+	/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), 8 + rows, S3C_GPIO_SFN(3));
+
+	/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
index a58c0cc7ba5e..6eac071afae2 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
@@ -16,60 +16,42 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
-#include <mach/gpio.h>
 #include <plat/gpio-cfg.h>
+#include <plat/sdhci.h>
 
 void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 {
-	unsigned int gpio;
-	unsigned int end;
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 
-	end = S3C64XX_GPG(2 + width);
+	/* Set all the necessary GPG pins to special-function 2 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
 
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
 	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
 }
 
 void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 {
-	unsigned int gpio;
-	unsigned int end;
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 
-	end = S3C64XX_GPH(2 + width);
+	/* Set all the necessary GPH pins to special-function 2 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPH(0), 2 + width, S3C_GPIO_SFN(2));
 
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
 	}
-
-	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
 }
 
 void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
 {
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S3C64XX_GPH(6 + width);
+	/* Set all the necessary GPH pins to special-function 3 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPH(6), width, S3C_GPIO_SFN(3));
 
-	/* Set all the necessary GPH pins to special-function 1 */
-	for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	/* Set all the necessary GPC pins to special-function 1 */
-	for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	/* Set all the necessary GPC pins to special-function 3 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPC(4), 2, S3C_GPIO_SFN(3));
 }
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
deleted file mode 100644
index f066fae07c57..000000000000
--- a/arch/arm/mach-s5p6440/Kconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-# arch/arm/mach-s5p6440/Kconfig
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-if ARCH_S5P6440
-
-config CPU_S5P6440
-	bool
-	select S3C_PL330_DMA
-	help
-	  Enable S5P6440 CPU support
-
-config MACH_SMDK6440
-	bool "SMDK6440"
-	select CPU_S5P6440
-	select SAMSUNG_DEV_TS
-	select SAMSUNG_DEV_ADC
-	select S3C_DEV_WDT
-	select HAVE_S3C2410_WATCHDOG
-	help
-	  Machine support for the Samsung SMDK6440
-
-endif
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
deleted file mode 100644
index be3c53aab23f..000000000000
--- a/arch/arm/mach-s5p6440/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-# arch/arm/mach-s5p6440/Makefile
-#
-# Copyright (c) 2009 Samsung Electronics Co., Ltd.
-# 		http://www.samsung.com/
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S5P6440 system
-
-obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o dma.o
-obj-$(CONFIG_CPU_S5P6440)	+= setup-i2c0.o
-
-# machine support
-
-obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
-
-# device support
-obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
diff --git a/arch/arm/mach-s5p6440/clock.c b/arch/arm/mach-s5p6440/clock.c
deleted file mode 100644
index ca6e48dce777..000000000000
--- a/arch/arm/mach-s5p6440/clock.c
+++ /dev/null
@@ -1,846 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/clock.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-#include <mach/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/clock-clksrc.h>
-#include <plat/s5p-clock.h>
-#include <plat/pll.h>
-#include <plat/s5p6440.h>
-
-/* APLL Mux output clock */
-static struct clksrc_clk clk_mout_apll = {
-	.clk    = {
-		.name           = "mout_apll",
-		.id             = -1,
-	},
-	.sources        = &clk_src_apll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
-};
-
-static int s5p6440_epll_enable(struct clk *clk, int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
-
-	if (enable)
-		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
-	else
-		__raw_writel(epll_con, S5P_EPLL_CON);
-
-	return 0;
-}
-
-static unsigned long s5p6440_epll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
-static u32 epll_div[][5] = {
-	{ 36000000,	0,	48, 1, 4 },
-	{ 48000000,	0,	32, 1, 3 },
-	{ 60000000,	0,	40, 1, 3 },
-	{ 72000000,	0,	48, 1, 3 },
-	{ 84000000,	0,	28, 1, 2 },
-	{ 96000000,	0,	32, 1, 2 },
-	{ 32768000,	45264,	43, 1, 4 },
-	{ 45158000,	6903,	30, 1, 3 },
-	{ 49152000,	50332,	32, 1, 3 },
-	{ 67738000,	10398,	45, 1, 3 },
-	{ 73728000,	9961,	49, 1, 3 }
-};
-
-static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned int epll_con, epll_con_k;
-	unsigned int i;
-
-	if (clk->rate == rate)	/* Return if nothing changed */
-		return 0;
-
-	epll_con = __raw_readl(S5P_EPLL_CON);
-	epll_con_k = __raw_readl(S5P_EPLL_CON_K);
-
-	epll_con_k &= ~(PLL90XX_KDIV_MASK);
-	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
-
-	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
-		 if (epll_div[i][0] == rate) {
-			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
-			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
-				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
-				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(epll_div)) {
-		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
-		return -EINVAL;
-	}
-
-	__raw_writel(epll_con, S5P_EPLL_CON);
-	__raw_writel(epll_con_k, S5P_EPLL_CON_K);
-
-	clk->rate = rate;
-
-	return 0;
-}
-
-static struct clk_ops s5p6440_epll_ops = {
-	.get_rate = s5p6440_epll_get_rate,
-	.set_rate = s5p6440_epll_set_rate,
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk    = {
-		.name           = "mout_epll",
-		.id             = -1,
-	},
-	.sources        = &clk_src_epll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 2, .size = 1 },
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name           = "mout_mpll",
-		.id             = -1,
-	},
-	.sources        = &clk_src_mpll,
-	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 },
-};
-
-enum perf_level {
-	L0 = 532*1000,
-	L1 = 266*1000,
-	L2 = 133*1000,
-};
-
-static const u32 clock_table[][3] = {
-	/*{ARM_CLK, DIVarm, DIVhclk}*/
-	{L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P_CLKDIV0_HCLK_SHIFT)},
-	{L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P_CLKDIV0_HCLK_SHIFT)},
-	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P_CLKDIV0_HCLK_SHIFT)},
-};
-
-static unsigned long s5p6440_armclk_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 clkdiv;
-
-	/* divisor mask starts at bit0, so no need to shift */
-	clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
-
-	return rate / (clkdiv + 1);
-}
-
-static unsigned long s5p6440_armclk_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	u32 iter;
-
-	for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
-		if (rate > clock_table[iter][0])
-			return clock_table[iter-1][0];
-	}
-
-	return clock_table[ARRAY_SIZE(clock_table) - 1][0];
-}
-
-static int s5p6440_armclk_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 round_tmp;
-	u32 iter;
-	u32 clk_div0_tmp;
-	u32 cur_rate = clk->ops->get_rate(clk);
-	unsigned long flags;
-
-	round_tmp = clk->ops->round_rate(clk, rate);
-	if (round_tmp == cur_rate)
-		return 0;
-
-
-	for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
-		if (round_tmp == clock_table[iter][0])
-			break;
-	}
-
-	if (iter >= ARRAY_SIZE(clock_table))
-		iter = ARRAY_SIZE(clock_table) - 1;
-
-	local_irq_save(flags);
-	if (cur_rate > round_tmp) {
-		/* Frequency Down */
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
-		clk_div0_tmp |= clock_table[iter][1];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
-				~(S5P_CLKDIV0_HCLK_MASK);
-		clk_div0_tmp |= clock_table[iter][2];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-
-	} else {
-		/* Frequency Up */
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
-				~(S5P_CLKDIV0_HCLK_MASK);
-		clk_div0_tmp |= clock_table[iter][2];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-
-		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
-		clk_div0_tmp |= clock_table[iter][1];
-		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
-		}
-	local_irq_restore(flags);
-
-	clk->rate = clock_table[iter][0];
-
-	return 0;
-}
-
-static struct clk_ops s5p6440_clkarm_ops = {
-	.get_rate	= s5p6440_armclk_get_rate,
-	.set_rate	= s5p6440_armclk_set_rate,
-	.round_rate	= s5p6440_armclk_round_rate,
-};
-
-static struct clksrc_clk clk_armclk = {
-	.clk	= {
-		.name	= "armclk",
-		.id	= 1,
-		.parent	= &clk_mout_apll.clk,
-		.ops	= &s5p6440_clkarm_ops,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mpll = {
-	.clk	= {
-		.name	= "dout_mpll",
-		.id	= -1,
-		.parent	= &clk_mout_mpll.clk,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk clk_hclk = {
-	.clk	= {
-		.name	= "clk_hclk",
-		.id	= -1,
-		.parent	= &clk_armclk.clk,
-	},
-	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk = {
-	.clk	= {
-		.name	= "clk_pclk",
-		.id	= -1,
-		.parent	= &clk_hclk.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 4 },
-};
-
-static struct clk *clkset_hclklow_list[] = {
-	&clk_mout_apll.clk,
-	&clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_hclklow = {
-	.sources	= clkset_hclklow_list,
-	.nr_sources	= ARRAY_SIZE(clkset_hclklow_list),
-};
-
-static struct clksrc_clk clk_hclk_low = {
-	.clk = {
-		.name	= "hclk_low",
-		.id	= -1,
-	},
-	.sources	= &clkset_hclklow,
-	.reg_src	= { .reg = S5P_SYS_OTHERS, .shift = 6, .size = 1 },
-	.reg_div	= { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_pclk_low = {
-	.clk	= {
-		.name	= "pclk_low",
-		.id	= -1,
-		.parent	= &clk_hclk_low.clk,
-	},
-	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
-};
-
-int s5p6440_clk48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S5P_OTHERS);
-	if (enable)
-		val |= S5P_OTHERS_USB_SIG_MASK;
-	else
-		val &= ~S5P_OTHERS_USB_SIG_MASK;
-
-	__raw_writel(val, S5P_OTHERS);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static int s5p6440_pclk_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_PCLK, clk, enable);
-}
-
-static int s5p6440_hclk0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_HCLK0, clk, enable);
-}
-
-static int s5p6440_hclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_HCLK1, clk, enable);
-}
-
-static int s5p6440_sclk_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable);
-}
-
-static int s5p6440_sclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_SCLK1, clk, enable);
-}
-
-static int s5p6440_mem_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable);
-}
-
-/*
- * The following clocks will be disabled during clock initialization. It is
- * recommended to keep the following clocks disabled until the driver requests
- * for enabling the clock.
- */
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_mem_ctrl,
-		.ctrlbit	= S5P_CLKCON_MEM0_HCLK_NFCON,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_TSADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_IIC0,
-	}, {
-		.name		= "i2s_v40",
-		.id		= 0,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_IIS2,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_SPI1,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_SPI0_48,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_SPI1_48,
-	}, {
-		.name		= "mmc_48m",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_MMC0_48,
-	}, {
-		.name		= "mmc_48m",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_MMC1_48,
-	}, {
-		.name		= "mmc_48m",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5p6440_sclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_SCLK0_MMC2_48,
-	}, {
-		.name    	= "otg",
-		.id	   	= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable  	= s5p6440_hclk0_ctrl,
-		.ctrlbit 	= S5P_CLKCON_HCLK0_USB
-	}, {
-		.name    	= "post",
-		.id	   	= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable  	= s5p6440_hclk0_ctrl,
-		.ctrlbit 	= S5P_CLKCON_HCLK0_POST0
-	}, {
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk1_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK1_DISPCON,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC2,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_WDT,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_PWM,
-	}, {
-		.name		= "hclk_fimgvg",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk1_ctrl,
-		.ctrlbit	= (1 << 2),
-	}, {
-		.name		= "tsi",
-		.id		= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "pclk_fimgvg",
-		.id		= -1,
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 31),
-	}, {
-		.name		= "dmc0",
-		.id		= -1,
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 30),
-	}, {
-		.name		= "etm",
-		.id		= -1,
-		.parent		= &clk_pclk.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 29),
-	}, {
-		.name		= "dsim",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 28),
-	}, {
-		.name		= "gps",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "pcm",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= (1 << 8),
-	}, {
-		.name		= "irom",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 25),
-	}, {
-		.name		= "dma",
-		.id		= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "2d",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 8),
-	},
-};
-
-/*
- * The following clocks will be enabled during clock initialization.
- */
-static struct clk init_clocks[] = {
-	{
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_GPIO,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_pclk_low.clk,
-		.enable		= s5p6440_pclk_ctrl,
-		.ctrlbit	= S5P_CLKCON_PCLK_UART3,
-	}, {
-		.name		= "mem",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "intc",
-		.id		= -1,
-		.parent		= &clk_hclk.clk,
-		.enable		= s5p6440_hclk0_ctrl,
-		.ctrlbit	= (1 << 1),
-	},
-};
-
-static struct clk clk_iis_cd_v40 = {
-	.name		= "iis_cdclk_v40",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd = {
-	.name		= "pcm_cdclk",
-	.id		= -1,
-};
-
-static struct clk *clkset_group1_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-	&clk_fin_epll,
-};
-
-static struct clksrc_sources clkset_group1 = {
-	.sources	= clkset_group1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll.clk,
-	&clk_fin_epll,
-	&clk_iis_cd_v40,
-	&clk_pcm_cd,
-};
-
-static struct clksrc_sources clkset_audio = {
-	.sources	= clkset_audio_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio_list),
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 0,
-			.ctrlbit        = S5P_CLKCON_SCLK0_MMC0,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 1,
-			.ctrlbit        = S5P_CLKCON_SCLK0_MMC1,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 2,
-			.ctrlbit        = S5P_CLKCON_SCLK0_MMC2,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "uclk1",
-			.id		= -1,
-			.ctrlbit        = S5P_CLKCON_SCLK0_UART,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_uart,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 13, .size = 1 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "spi_epll",
-			.id		= 0,
-			.ctrlbit        = S5P_CLKCON_SCLK0_SPI0,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "spi_epll",
-			.id		= 1,
-			.ctrlbit        = S5P_CLKCON_SCLK0_SPI1,
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_post",
-			.id		= -1,
-			.ctrlbit	= (1 << 10),
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 26, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_dispcon",
-			.id		= -1,
-			.ctrlbit	= (1 << 1),
-			.enable		= s5p6440_sclk1_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimgvg",
-			.id		= -1,
-			.ctrlbit	= (1 << 2),
-			.enable		= s5p6440_sclk1_ctrl,
-		},
-		.sources = &clkset_group1,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
-		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_audio2",
-			.id		= -1,
-			.ctrlbit	= (1 << 11),
-			.enable		= s5p6440_sclk_ctrl,
-		},
-		.sources = &clkset_audio,
-		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 24, .size = 4 },
-	},
-};
-
-/* Clock initialisation code */
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_apll,
-	&clk_mout_epll,
-	&clk_mout_mpll,
-	&clk_dout_mpll,
-	&clk_armclk,
-	&clk_hclk,
-	&clk_pclk,
-	&clk_hclk_low,
-	&clk_pclk_low,
-};
-
-void __init_or_cpufreq s5p6440_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long hclk_low;
-	unsigned long pclk;
-	unsigned long pclk_low;
-	unsigned long epll;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned int ptr;
-
-	/* Set S5P6440 functions for clk_fout_epll */
-	clk_fout_epll.enable = s5p6440_epll_enable;
-	clk_fout_epll.ops = &s5p6440_epll_ops;
-
-	clk_48m.enable = s5p6440_clk48m_ctrl;
-
-	xtal_clk = clk_get(NULL, "ext_xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON),
-				__raw_readl(S5P_EPLL_CON_K));
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502);
-
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
-	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
-			" E=%ld.%ldMHz\n",
-			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
-
-	fclk = clk_get_rate(&clk_armclk.clk);
-	hclk = clk_get_rate(&clk_hclk.clk);
-	pclk = clk_get_rate(&clk_pclk.clk);
-	hclk_low = clk_get_rate(&clk_hclk_low.clk);
-	pclk_low = clk_get_rate(&clk_pclk_low.clk);
-
-	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
-			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
-			print_mhz(hclk), print_mhz(hclk_low),
-			print_mhz(pclk), print_mhz(pclk_low));
-
-	clk_f.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_iis_cd_v40,
-	&clk_pcm_cd,
-};
-
-void __init s5p6440_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-	if (ret > 0)
-		printk(KERN_ERR "Failed to register %u clocks\n", ret);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c
deleted file mode 100644
index b2fe6a58155a..000000000000
--- a/arch/arm/mach-s5p6440/cpu.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/cpu.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/irq.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/s5p6440.h>
-
-static void s5p6440_idle(void)
-{
-	unsigned long val;
-
-	if (!need_resched()) {
-		val = __raw_readl(S5P_PWR_CFG);
-		val &= ~(0x3<<5);
-		val |= (0x1<<5);
-		__raw_writel(val, S5P_PWR_CFG);
-
-		cpu_do_idle();
-	}
-	local_irq_enable();
-}
-
-/* s5p6440_map_io
- *
- * register the standard cpu IO areas
-*/
-
-void __init s5p6440_map_io(void)
-{
-	/* initialize any device information early */
-	s3c_device_adc.name	= "s3c64xx-adc";
-}
-
-void __init s5p6440_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-	s5p6440_register_clocks();
-	s5p6440_setup_clocks();
-}
-
-void __init s5p6440_init_irq(void)
-{
-	/* S5P6440 supports only 2 VIC */
-	u32 vic[2];
-
-	/*
-	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
-	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
-	 */
-	vic[0] = 0xff800ae7;
-	vic[1] = 0xffbf23e5;
-
-	s5p_init_irq(vic, ARRAY_SIZE(vic));
-}
-
-struct sysdev_class s5p6440_sysclass = {
-	.name	= "s5p6440-core",
-};
-
-static struct sys_device s5p6440_sysdev = {
-	.cls	= &s5p6440_sysclass,
-};
-
-static int __init s5p6440_core_init(void)
-{
-	return sysdev_class_register(&s5p6440_sysclass);
-}
-
-core_initcall(s5p6440_core_init);
-
-int __init s5p6440_init(void)
-{
-	printk(KERN_INFO "S5P6440: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = s5p6440_idle;
-
-	return sysdev_register(&s5p6440_sysdev);
-}
diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c
deleted file mode 100644
index 0c5367962830..000000000000
--- a/arch/arm/mach-s5p6440/dev-audio.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/dev-audio.c
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/audio.h>
-
-#include <mach/gpio.h>
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-static int s5p6440_cfg_i2s(struct platform_device *pdev)
-{
-	/* configure GPIO for i2s port */
-	switch (pdev->id) {
-	case -1:
-		s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5));
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_i2s_pdata = {
-	.cfg_gpio = s5p6440_cfg_i2s,
-};
-
-static struct resource s5p6440_iis0_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_I2S,
-		.end   = S5P6440_PA_I2S + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_I2S0_TX,
-		.end   = DMACH_I2S0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_I2S0_RX,
-		.end   = DMACH_I2S0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6440_device_iis = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s5p6440_iis0_resource),
-	.resource	  = s5p6440_iis0_resource,
-	.dev = {
-		.platform_data = &s3c_i2s_pdata,
-	},
-};
-
-/* PCM Controller platform_devices */
-
-static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2));
-		break;
-
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
-	.cfg_gpio = s5p6440_pcm_cfg_gpio,
-};
-
-static struct resource s5p6440_pcm0_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_PCM,
-		.end   = S5P6440_PA_PCM + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_PCM0_TX,
-		.end   = DMACH_PCM0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_PCM0_RX,
-		.end   = DMACH_PCM0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-struct platform_device s5p6440_device_pcm = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6440_pcm0_resource),
-	.resource	  = s5p6440_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm_pdata,
-	},
-};
diff --git a/arch/arm/mach-s5p6440/dev-spi.c b/arch/arm/mach-s5p6440/dev-spi.c
deleted file mode 100644
index 0a30280019c0..000000000000
--- a/arch/arm/mach-s5p6440/dev-spi.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/gpio.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *spi_src_clks[] = {
-	[S5P6440_SPI_SRCCLK_PCLK] = "pclk",
-	[S5P6440_SPI_SRCCLK_SCLK] = "spi_epll",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP);
-		break;
-
-	case 1:
-		s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP);
-		break;
-
-	default:
-		dev_err(&pdev->dev, "Invalid SPI Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct resource s5p6440_spi0_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_SPI0,
-		.end   = S5P6440_PA_SPI0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI0_TX,
-		.end   = DMACH_SPI0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI0_RX,
-		.end   = DMACH_SPI0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
-	.cfg_gpio = s5p6440_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x1ff,
-	.rx_lvl_offset = 15,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p6440_device_spi0 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6440_spi0_resource),
-	.resource	  = s5p6440_spi0_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5p6440_spi0_pdata,
-	},
-};
-
-static struct resource s5p6440_spi1_resource[] = {
-	[0] = {
-		.start = S5P6440_PA_SPI1,
-		.end   = S5P6440_PA_SPI1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI1_TX,
-		.end   = DMACH_SPI1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI1_RX,
-		.end   = DMACH_SPI1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI1,
-		.end   = IRQ_SPI1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
-	.cfg_gpio = s5p6440_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x7f,
-	.rx_lvl_offset = 15,
-};
-
-struct platform_device s5p6440_device_spi1 = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s5p6440_spi1_resource),
-	.resource	  = s5p6440_spi1_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5p6440_spi1_pdata,
-	},
-};
-
-void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
-	struct s3c64xx_spi_info *pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0
-			|| src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) {
-		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	switch (cntrlr) {
-	case 0:
-		pd = &s5p6440_spi0_pdata;
-		break;
-	case 1:
-		pd = &s5p6440_spi1_pdata;
-		break;
-	default:
-		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
-							__func__, cntrlr);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5p6440/dma.c b/arch/arm/mach-s5p6440/dma.c
deleted file mode 100644
index 07606ad57519..000000000000
--- a/arch/arm/mach-s5p6440/dma.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-
-#include <plat/devs.h>
-#include <plat/irqs.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c-pl330-pdata.h>
-
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
-static struct resource s5p6440_pdma_resource[] = {
-	[0] = {
-		.start  = S5P6440_PA_PDMA,
-		.end    = S5P6440_PA_PDMA + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DMA0,
-		.end	= IRQ_DMA0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
-	.peri = {
-		[0] = DMACH_UART0_RX,
-		[1] = DMACH_UART0_TX,
-		[2] = DMACH_UART1_RX,
-		[3] = DMACH_UART1_TX,
-		[4] = DMACH_UART2_RX,
-		[5] = DMACH_UART2_TX,
-		[6] = DMACH_UART3_RX,
-		[7] = DMACH_UART3_TX,
-		[8] = DMACH_MAX,
-		[9] = DMACH_MAX,
-		[10] = DMACH_PCM0_TX,
-		[11] = DMACH_PCM0_RX,
-		[12] = DMACH_I2S0_TX,
-		[13] = DMACH_I2S0_RX,
-		[14] = DMACH_SPI0_TX,
-		[15] = DMACH_SPI0_RX,
-		[16] = DMACH_MAX,
-		[17] = DMACH_MAX,
-		[18] = DMACH_MAX,
-		[19] = DMACH_MAX,
-		[20] = DMACH_SPI1_TX,
-		[21] = DMACH_SPI1_RX,
-		[22] = DMACH_MAX,
-		[23] = DMACH_MAX,
-		[24] = DMACH_MAX,
-		[25] = DMACH_MAX,
-		[26] = DMACH_MAX,
-		[27] = DMACH_MAX,
-		[28] = DMACH_MAX,
-		[29] = DMACH_PWM,
-		[30] = DMACH_MAX,
-		[31] = DMACH_MAX,
-	},
-};
-
-static struct platform_device s5p6440_device_pdma = {
-	.name		= "s3c-pl330",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s5p6440_pdma_resource),
-	.resource	= s5p6440_pdma_resource,
-	.dev		= {
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5p6440_pdma_pdata,
-	},
-};
-
-static struct platform_device *s5p6440_dmacs[] __initdata = {
-	&s5p6440_device_pdma,
-};
-
-static int __init s5p6440_dma_init(void)
-{
-	platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs));
-
-	return 0;
-}
-arch_initcall(s5p6440_dma_init);
diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c
deleted file mode 100644
index 92efc05b1ba2..000000000000
--- a/arch/arm/mach-s5p6440/gpio.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/* arch/arm/mach-s5p6440/gpio.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * 		http://www.samsung.com/
- *
- * S5P6440 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/map.h>
-#include <mach/gpio.h>
-#include <mach/regs-gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* GPIO bank summary:
-*
-* Bank	GPIOs	Style	SlpCon	ExtInt Group
-* A	6	4Bit	Yes	1
-* B	7	4Bit	Yes	1
-* C	8	4Bit	Yes	2
-* F	2	2Bit	Yes	4 [1]
-* G	7	4Bit	Yes	5
-* H	10	4Bit[2]	Yes	6
-* I	16	2Bit	Yes	None
-* J	12	2Bit	Yes	None
-* N	16	2Bit	No	IRQ_EINT
-* P	8	2Bit	Yes	8
-* R	15	4Bit[2]	Yes	8
-*
-* [1] BANKF pins 14,15 do not form part of the external interrupt sources
-* [2] BANK has two control registers, GPxCON0 and GPxCON1
-*/
-
-static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
-					     unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long flags;
-
-	switch (offset) {
-	case 6:
-		offset += 1;
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		regcon -= 4;
-		break;
-	default:
-		offset -= 7;
-		break;
-	}
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	s3c_gpio_unlock(ourchip, flags);
-
-	return 0;
-}
-
-static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
-					      unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-	unsigned long flags;
-	unsigned con_offset  = offset;
-
-	switch (con_offset) {
-	case 6:
-		con_offset += 1;
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		regcon -= 4;
-		break;
-	default:
-		con_offset -= 7;
-		break;
-	}
-
-	s3c_gpio_lock(ourchip, flags);
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(con_offset));
-	con |= 0x1 << con_4bit_shift(con_offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	s3c_gpio_unlock(ourchip, flags);
-
-	return 0;
-}
-
-int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
-				   unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift;
-	unsigned long flags;
-	u32 con;
-
-	switch (off) {
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-	case 5:
-		shift = (off & 7) * 4;
-		reg -= 4;
-		break;
-	case 6:
-		shift = ((off + 1) & 7) * 4;
-		reg -= 4;
-	default:
-		shift = ((off + 1) & 7) * 4;
-		break;
-	}
-
-	if (s3c_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-		cfg <<= shift;
-	}
-
-	s3c_gpio_lock(chip, flags);
-
-	con = __raw_readl(reg);
-	con &= ~(0xf << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	s3c_gpio_unlock(chip, flags);
-
-	return 0;
-}
-
-static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = {
-	{
-		.cfg_eint	= 0,
-	}, {
-		.cfg_eint	= 7,
-	}, {
-		.cfg_eint	= 3,
-		.set_config	= s5p6440_gpio_setcfg_4bit_rbank,
-	}, {
-		.cfg_eint	= 0,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	}, {
-		.cfg_eint	= 2,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	}, {
-		.cfg_eint	= 3,
-		.set_config	= s3c_gpio_setcfg_s3c24xx,
-		.get_config	= s3c_gpio_getcfg_s3c24xx,
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
-	{
-		.base	= S5P6440_GPA_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPA(0),
-			.ngpio	= S5P6440_GPIO_A_NR,
-			.label	= "GPA",
-		},
-	}, {
-		.base	= S5P6440_GPB_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPB(0),
-			.ngpio	= S5P6440_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S5P6440_GPC_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPC(0),
-			.ngpio	= S5P6440_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S5P6440_GPG_BASE,
-		.config	= &s5p6440_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPG(0),
-			.ngpio	= S5P6440_GPIO_G_NR,
-			.label	= "GPG",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
-	{
-		.base	= S5P6440_GPH_BASE + 0x4,
-		.config	= &s5p6440_gpio_cfgs[1],
-		.chip	= {
-			.base	= S5P6440_GPH(0),
-			.ngpio	= S5P6440_GPIO_H_NR,
-			.label	= "GPH",
-		},
-	},
-};
-
-static struct s3c_gpio_chip gpio_rbank_4bit2[] = {
-	{
-		.base	= S5P6440_GPR_BASE + 0x4,
-		.config	= &s5p6440_gpio_cfgs[2],
-		.chip	= {
-			.base	= S5P6440_GPR(0),
-			.ngpio	= S5P6440_GPIO_R_NR,
-			.label	= "GPR",
-		},
-	},
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
-	{
-		.base	= S5P6440_GPF_BASE,
-		.config	= &s5p6440_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6440_GPF(0),
-			.ngpio	= S5P6440_GPIO_F_NR,
-			.label	= "GPF",
-		},
-	}, {
-		.base	= S5P6440_GPI_BASE,
-		.config	= &s5p6440_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6440_GPI(0),
-			.ngpio	= S5P6440_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5P6440_GPJ_BASE,
-		.config	= &s5p6440_gpio_cfgs[3],
-		.chip	= {
-			.base	= S5P6440_GPJ(0),
-			.ngpio	= S5P6440_GPIO_J_NR,
-			.label	= "GPJ",
-		},
-	}, {
-		.base	= S5P6440_GPN_BASE,
-		.config	= &s5p6440_gpio_cfgs[4],
-		.chip	= {
-			.base	= S5P6440_GPN(0),
-			.ngpio	= S5P6440_GPIO_N_NR,
-			.label	= "GPN",
-		},
-	}, {
-		.base	= S5P6440_GPP_BASE,
-		.config	= &s5p6440_gpio_cfgs[5],
-		.chip	= {
-			.base	= S5P6440_GPP(0),
-			.ngpio	= S5P6440_GPIO_P_NR,
-			.label	= "GPP",
-		},
-	},
-};
-
-void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chipcfg++) {
-		if (!chipcfg->set_config)
-			chipcfg->set_config	= s3c_gpio_setcfg_s3c64xx_4bit;
-		if (!chipcfg->get_config)
-			chipcfg->get_config	= s3c_gpio_getcfg_s3c64xx_4bit;
-		if (!chipcfg->set_pull)
-			chipcfg->set_pull	= s3c_gpio_setpull_updown;
-		if (!chipcfg->get_pull)
-			chipcfg->get_pull	= s3c_gpio_getpull_updown;
-	}
-}
-
-static void __init s5p6440_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
-						int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		chip->chip.direction_input = s5p6440_gpiolib_rbank_4bit2_input;
-		chip->chip.direction_output =
-					s5p6440_gpiolib_rbank_4bit2_output;
-		s3c_gpiolib_add(chip);
-	}
-}
-
-static int __init s5p6440_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chips = s5p6440_gpio_2bit;
-	int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit);
-
-	s5p6440_gpiolib_set_cfg(s5p6440_gpio_cfgs,
-				ARRAY_SIZE(s5p6440_gpio_cfgs));
-
-	for (; nr_chips > 0; nr_chips--, chips++)
-		s3c_gpiolib_add(chips);
-
-	samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
-				ARRAY_SIZE(s5p6440_gpio_4bit));
-
-	samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
-				ARRAY_SIZE(s5p6440_gpio_4bit2));
-
-	s5p6440_gpio_add_rbank_4bit2(gpio_rbank_4bit2,
-				ARRAY_SIZE(gpio_rbank_4bit2));
-
-	return 0;
-}
-arch_initcall(s5p6440_gpiolib_init);
diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
deleted file mode 100644
index 1347d7f99079..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/debug-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/debug-macro.S
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <mach/map.h>
-#include <plat/regs-serial.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/entry-macro.S b/arch/arm/mach-s5p6440/include/mach/entry-macro.S
deleted file mode 100644
index e65f1b967262..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/entry-macro.S
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Low-level IRQ helper macros for the Samsung S5P6440
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/map.h>
-#include <plat/irqs.h>
-
-#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/gpio.h b/arch/arm/mach-s5p6440/include/mach/gpio.h
deleted file mode 100644
index 21783834f2a2..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/gpio.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/gpio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
-/* GPIO bank sizes */
-#define S5P6440_GPIO_A_NR	(6)
-#define S5P6440_GPIO_B_NR	(7)
-#define S5P6440_GPIO_C_NR	(8)
-#define S5P6440_GPIO_F_NR	(2)
-#define S5P6440_GPIO_G_NR	(7)
-#define S5P6440_GPIO_H_NR	(10)
-#define S5P6440_GPIO_I_NR	(16)
-#define S5P6440_GPIO_J_NR	(12)
-#define S5P6440_GPIO_N_NR	(16)
-#define S5P6440_GPIO_P_NR	(8)
-#define S5P6440_GPIO_R_NR	(15)
-
-/* GPIO bank numbers */
-
-/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
- * space for debugging purposes so that any accidental
- * change from one gpio bank to another can be caught.
-*/
-#define S5P6440_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-enum s5p_gpio_number {
-	S5P6440_GPIO_A_START = 0,
-	S5P6440_GPIO_B_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_A),
-	S5P6440_GPIO_C_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_B),
-	S5P6440_GPIO_F_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_C),
-	S5P6440_GPIO_G_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_F),
-	S5P6440_GPIO_H_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_G),
-	S5P6440_GPIO_I_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_H),
-	S5P6440_GPIO_J_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_I),
-	S5P6440_GPIO_N_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_J),
-	S5P6440_GPIO_P_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_N),
-	S5P6440_GPIO_R_START = S5P6440_GPIO_NEXT(S5P6440_GPIO_P),
-};
-
-/* S5P6440 GPIO number definitions. */
-#define S5P6440_GPA(_nr)	(S5P6440_GPIO_A_START + (_nr))
-#define S5P6440_GPB(_nr)	(S5P6440_GPIO_B_START + (_nr))
-#define S5P6440_GPC(_nr)	(S5P6440_GPIO_C_START + (_nr))
-#define S5P6440_GPF(_nr)	(S5P6440_GPIO_F_START + (_nr))
-#define S5P6440_GPG(_nr)	(S5P6440_GPIO_G_START + (_nr))
-#define S5P6440_GPH(_nr)	(S5P6440_GPIO_H_START + (_nr))
-#define S5P6440_GPI(_nr)	(S5P6440_GPIO_I_START + (_nr))
-#define S5P6440_GPJ(_nr)	(S5P6440_GPIO_J_START + (_nr))
-#define S5P6440_GPN(_nr)	(S5P6440_GPIO_N_START + (_nr))
-#define S5P6440_GPP(_nr)	(S5P6440_GPIO_P_START + (_nr))
-#define S5P6440_GPR(_nr)	(S5P6440_GPIO_R_START + (_nr))
-
-/* the end of the S5P6440 specific gpios */
-#define S5P6440_GPIO_END	(S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
-#define S3C_GPIO_END		S5P6440_GPIO_END
-
-/* define the number of gpios we need to the one after the GPR() range */
-#define ARCH_NR_GPIOS		(S5P6440_GPR(S5P6440_GPIO_R_NR) +	\
-				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
-
-#include <asm-generic/gpio.h>
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/hardware.h b/arch/arm/mach-s5p6440/include/mach/hardware.h
deleted file mode 100644
index be8b26e875db..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/hardware.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Hardware support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H __FILE__
-
-/* currently nothing here, placeholder */
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h
deleted file mode 100644
index fa2d69cb1ad7..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/io.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5p6440/include/mach/io.h
- *
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben-linux@fluff.org>
- *
- * Default IO routines for S3C64XX based
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/* No current ISA/PCI bus support. */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#define IO_SPACE_LIMIT (0xFFFFFFFF)
-
-#endif
diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h
deleted file mode 100644
index 911854d9ad42..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/irqs.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_S5P_IRQS_H
-#define __ASM_ARCH_S5P_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* VIC0 */
-
-#define IRQ_EINT0_3		S5P_IRQ_VIC0(0)
-#define IRQ_EINT4_11		S5P_IRQ_VIC0(1)
-#define IRQ_RTC_TIC		S5P_IRQ_VIC0(2)
-#define IRQ_IIC1		S5P_IRQ_VIC0(5)
-#define IRQ_I2SV40		S5P_IRQ_VIC0(6)
-#define IRQ_GPS			S5P_IRQ_VIC0(7)
-#define IRQ_POST0		S5P_IRQ_VIC0(9)
-#define IRQ_2D			S5P_IRQ_VIC0(11)
-#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(23)
-#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(24)
-#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(25)
-#define IRQ_WDT			S5P_IRQ_VIC0(26)
-#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(27)
-#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(28)
-#define IRQ_DISPCON0		S5P_IRQ_VIC0(29)
-#define IRQ_DISPCON1		S5P_IRQ_VIC0(30)
-#define IRQ_DISPCON2		S5P_IRQ_VIC0(31)
-
-/* VIC1 */
-
-#define IRQ_EINT12_15		S5P_IRQ_VIC1(0)
-#define IRQ_PCM0		S5P_IRQ_VIC1(2)
-#define IRQ_UART0		S5P_IRQ_VIC1(5)
-#define IRQ_UART1		S5P_IRQ_VIC1(6)
-#define IRQ_UART2		S5P_IRQ_VIC1(7)
-#define IRQ_UART3		S5P_IRQ_VIC1(8)
-#define IRQ_DMA0		S5P_IRQ_VIC1(9)
-#define IRQ_NFC			S5P_IRQ_VIC1(13)
-#define IRQ_SPI0		S5P_IRQ_VIC1(16)
-#define IRQ_SPI1		S5P_IRQ_VIC1(17)
-#define IRQ_IIC			S5P_IRQ_VIC1(18)
-#define IRQ_DISPCON3		S5P_IRQ_VIC1(19)
-#define IRQ_FIMGVG		S5P_IRQ_VIC1(20)
-#define IRQ_EINT_GROUPS		S5P_IRQ_VIC1(21)
-#define IRQ_PMUIRQ		S5P_IRQ_VIC1(23)
-#define IRQ_HSMMC0		S5P_IRQ_VIC1(24)
-#define IRQ_HSMMC1		S5P_IRQ_VIC1(25)
-#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
-#define IRQ_OTG			S5P_IRQ_VIC1(26)
-#define IRQ_DSI			S5P_IRQ_VIC1(27)
-#define IRQ_RTC_ALARM		S5P_IRQ_VIC1(28)
-#define IRQ_TSI			S5P_IRQ_VIC1(29)
-#define IRQ_PENDN		S5P_IRQ_VIC1(30)
-#define IRQ_TC			IRQ_PENDN
-#define IRQ_ADC			S5P_IRQ_VIC1(31)
-
-/*
- * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
- * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
- * after the pair of VICs.
- */
-
-#define S5P_IRQ_EINT_BASE	(S5P_IRQ_VIC1(31) + 6)
-
-#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
-
-#define S5P_EINT_BASE1		(S5P_IRQ_EINT_BASE)
-/*
- * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
- * to wake up from sleep. If request is beyond this range, by mistake, a large
- * return value for an irq number should be indication of something amiss.
- */
-#define S5P_EINT_BASE2		(0xf0000000)
-
-/*
- * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
- * that they are sourced from the GPIO pins but with a different scheme for
- * priority and source indication.
- *
- * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
- * interrupts, but for historical reasons they are kept apart from these
- * next interrupts.
- *
- * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
- * machine specific support files.
- */
-
-/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
-#define IRQ_EINT_GROUP1_NR	(15)
-#define IRQ_EINT_GROUP2_NR	(8)
-#define IRQ_EINT_GROUP5_NR	(7)
-#define IRQ_EINT_GROUP6_NR	(10)
-/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
-#define IRQ_EINT_GROUP8_NR	(11)
-
-#define IRQ_EINT_GROUP_BASE	S5P_EINT(16)
-#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0)
-#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
-#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
-#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
-#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
-
-#define IRQ_EINT_GROUP(grp, x)	(IRQ_EINT_GROUP##grp##_BASE + (x))
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
-
-#endif /* __ASM_ARCH_S5P_IRQS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
deleted file mode 100644
index 44011b91fbd1..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/map.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/map.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H __FILE__
-
-#include <plat/map-base.h>
-#include <plat/map-s5p.h>
-
-#define S5P6440_PA_CHIPID	(0xE0000000)
-#define S5P_PA_CHIPID		S5P6440_PA_CHIPID
-
-#define S5P6440_PA_SYSCON	(0xE0100000)
-#define S5P6440_PA_CLK		(S5P6440_PA_SYSCON + 0x0)
-#define S5P_PA_SYSCON		S5P6440_PA_SYSCON
-
-#define S5P6440_PA_GPIO		(0xE0308000)
-#define S5P_PA_GPIO		S5P6440_PA_GPIO
-
-#define S5P6440_PA_VIC0		(0xE4000000)
-#define S5P_PA_VIC0		S5P6440_PA_VIC0
-
-#define S5P6440_PA_PDMA		0xE9000000
-
-#define S5P6440_PA_VIC1		(0xE4100000)
-#define S5P_PA_VIC1		S5P6440_PA_VIC1
-
-#define S5P6440_PA_TIMER	(0xEA000000)
-#define S5P_PA_TIMER		S5P6440_PA_TIMER
-
-#define S5P6440_PA_RTC		(0xEA100000)
-#define S5P_PA_RTC		S5P6440_PA_RTC
-
-#define S5P6440_PA_WDT		(0xEA200000)
-#define S5P_PA_WDT		S5P6440_PA_WDT
-
-#define S5P6440_PA_UART		(0xEC000000)
-
-#define S5P_PA_UART0		(S5P6440_PA_UART + 0x0)
-#define S5P_PA_UART1		(S5P6440_PA_UART + 0x400)
-#define S5P_PA_UART2		(S5P6440_PA_UART + 0x800)
-#define S5P_PA_UART3		(S5P6440_PA_UART + 0xC00)
-
-#define S5P_SZ_UART		SZ_256
-
-#define S5P6440_PA_IIC0		(0xEC104000)
-
-#define S5P6440_PA_SPI0		0xEC400000
-#define S5P6440_PA_SPI1		0xEC500000
-
-#define S5P6440_PA_HSOTG	(0xED100000)
-
-#define S5P6440_PA_HSMMC0	(0xED800000)
-#define S5P6440_PA_HSMMC1	(0xED900000)
-#define S5P6440_PA_HSMMC2	(0xEDA00000)
-
-#define S5P6440_PA_SDRAM	(0x20000000)
-#define S5P_PA_SDRAM		S5P6440_PA_SDRAM
-
-/* I2S */
-#define S5P6440_PA_I2S		0xF2000000
-
-/* PCM */
-#define S5P6440_PA_PCM		0xF2100000
-
-#define S5P6440_PA_ADC		(0xF3000000)
-
-/* compatibiltiy defines. */
-#define S3C_PA_UART		S5P6440_PA_UART
-#define S3C_PA_IIC		S5P6440_PA_IIC0
-#define S3C_PA_WDT		S5P6440_PA_WDT
-
-#define SAMSUNG_PA_ADC		S5P6440_PA_ADC
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/memory.h b/arch/arm/mach-s5p6440/include/mach/memory.h
deleted file mode 100644
index d62910c71b56..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/memory.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PHYS_OFFSET     	UL(0x20000000)
-#define CONSISTENT_DMA_SIZE	SZ_8M
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h b/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
deleted file mode 100644
index 6a2a02fdf12a..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
- *
- * S5P6440 - pwm clock and timer support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PWMCLK_H
-#define __ASM_ARCH_PWMCLK_H __FILE__
-
-/**
- * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @tcfg: The timer TCFG1 register bits shifted down to 0.
- *
- * Return true if the given configuration from TCFG1 is a TCLK instead
- * any of the TDIV clocks.
- */
-static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
-{
-	return 0;
-}
-
-/**
- * tcfg_to_divisor() - convert tcfg1 setting to a divisor
- * @tcfg1: The tcfg1 setting, shifted down.
- *
- * Get the divisor value for the given tcfg1 setting. We assume the
- * caller has already checked to see if this is not a TCLK source.
- */
-static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
-{
-	return 1 << tcfg1;
-}
-
-/**
- * pwm_tdiv_has_div1() - does the tdiv setting have a /1
- *
- * Return true if we have a /1 in the tdiv setting.
- */
-static inline unsigned int pwm_tdiv_has_div1(void)
-{
-	return 1;
-}
-
-/**
- * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
- * @div: The divisor to calculate the bit information for.
- *
- * Turn a divisor into the necessary bit field for TCFG1.
- */
-static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
-{
-	return ilog2(div);
-}
-
-#define S3C_TCFG1_MUX_TCLK 0
-
-#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
deleted file mode 100644
index c783ecc9f193..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/regs-clock.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/regs-clock.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H __FILE__
-
-#include <mach/map.h>
-
-#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
-
-#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
-#define S5P_MPLL_LOCK		S5P_CLKREG(0x04)
-#define S5P_EPLL_LOCK		S5P_CLKREG(0x08)
-#define S5P_APLL_CON		S5P_CLKREG(0x0C)
-#define S5P_MPLL_CON		S5P_CLKREG(0x10)
-#define S5P_EPLL_CON		S5P_CLKREG(0x14)
-#define S5P_EPLL_CON_K		S5P_CLKREG(0x18)
-#define S5P_CLK_SRC0		S5P_CLKREG(0x1C)
-#define S5P_CLK_DIV0		S5P_CLKREG(0x20)
-#define S5P_CLK_DIV1		S5P_CLKREG(0x24)
-#define S5P_CLK_DIV2		S5P_CLKREG(0x28)
-#define S5P_CLK_OUT		S5P_CLKREG(0x2C)
-#define S5P_CLK_GATE_HCLK0	S5P_CLKREG(0x30)
-#define S5P_CLK_GATE_PCLK	S5P_CLKREG(0x34)
-#define S5P_CLK_GATE_SCLK0	S5P_CLKREG(0x38)
-#define S5P_CLK_GATE_MEM0	S5P_CLKREG(0x3C)
-#define S5P_CLK_DIV3		S5P_CLKREG(0x40)
-#define S5P_CLK_GATE_HCLK1	S5P_CLKREG(0x44)
-#define S5P_CLK_GATE_SCLK1	S5P_CLKREG(0x48)
-#define S5P_AHB_CON0           	S5P_CLKREG(0x100)
-#define S5P_CLK_SRC1           	S5P_CLKREG(0x10C)
-#define S5P_SWRESET		S5P_CLKREG(0x114)
-#define S5P_SYS_ID		S5P_CLKREG(0x118)
-#define S5P_SYS_OTHERS		S5P_CLKREG(0x11C)
-#define S5P_MEM_CFG_STAT	S5P_CLKREG(0x12C)
-#define S5P_PWR_CFG		S5P_CLKREG(0x804)
-#define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0x808)
-#define S5P_NORMAL_CFG		S5P_CLKREG(0x810)
-#define S5P_STOP_CFG		S5P_CLKREG(0x814)
-#define S5P_SLEEP_CFG		S5P_CLKREG(0x818)
-#define S5P_OSC_FREQ		S5P_CLKREG(0x820)
-#define S5P_OSC_STABLE		S5P_CLKREG(0x824)
-#define S5P_PWR_STABLE		S5P_CLKREG(0x828)
-#define S5P_MTC_STABLE		S5P_CLKREG(0x830)
-#define S5P_OTHERS		S5P_CLKREG(0x900)
-#define S5P_RST_STAT		S5P_CLKREG(0x904)
-#define S5P_WAKEUP_STAT		S5P_CLKREG(0x908)
-#define S5P_SLPEN		S5P_CLKREG(0x930)
-#define S5P_INFORM0		S5P_CLKREG(0xA00)
-#define S5P_INFORM1		S5P_CLKREG(0xA04)
-#define S5P_INFORM2		S5P_CLKREG(0xA08)
-#define S5P_INFORM3		S5P_CLKREG(0xA0C)
-
-/* CLKDIV0 */
-#define S5P_CLKDIV0_PCLK_MASK		(0xf << 12)
-#define S5P_CLKDIV0_PCLK_SHIFT		(12)
-#define S5P_CLKDIV0_HCLK_MASK		(0xf << 8)
-#define S5P_CLKDIV0_HCLK_SHIFT		(8)
-#define S5P_CLKDIV0_MPLL_MASK		(0x1 << 4)
-#define S5P_CLKDIV0_ARM_MASK		(0xf << 0)
-#define S5P_CLKDIV0_ARM_SHIFT		(0)
-
-/* CLKDIV3 */
-#define S5P_CLKDIV3_PCLK_LOW_MASK	(0xf << 12)
-#define S5P_CLKDIV3_PCLK_LOW_SHIFT	(12)
-#define S5P_CLKDIV3_HCLK_LOW_MASK	(0xf << 8)
-#define S5P_CLKDIV3_HCLK_LOW_SHIFT	(8)
-
-/* HCLK0 GATE Registers */
-#define S5P_CLKCON_HCLK0_USB		(1<<20)
-#define S5P_CLKCON_HCLK0_HSMMC2		(1<<19)
-#define S5P_CLKCON_HCLK0_HSMMC1		(1<<18)
-#define S5P_CLKCON_HCLK0_HSMMC0		(1<<17)
-#define S5P_CLKCON_HCLK0_POST0		(1<<5)
-
-/* HCLK1 GATE Registers */
-#define S5P_CLKCON_HCLK1_DISPCON	(1<<1)
-
-/* PCLK GATE Registers */
-#define S5P_CLKCON_PCLK_IIS2		(1<<26)
-#define S5P_CLKCON_PCLK_SPI1		(1<<22)
-#define S5P_CLKCON_PCLK_SPI0		(1<<21)
-#define S5P_CLKCON_PCLK_GPIO		(1<<18)
-#define S5P_CLKCON_PCLK_IIC0		(1<<17)
-#define S5P_CLKCON_PCLK_TSADC		(1<<12)
-#define S5P_CLKCON_PCLK_PWM		(1<<7)
-#define S5P_CLKCON_PCLK_RTC		(1<<6)
-#define S5P_CLKCON_PCLK_WDT		(1<<5)
-#define S5P_CLKCON_PCLK_UART3		(1<<4)
-#define S5P_CLKCON_PCLK_UART2		(1<<3)
-#define S5P_CLKCON_PCLK_UART1		(1<<2)
-#define S5P_CLKCON_PCLK_UART0		(1<<1)
-
-/* SCLK0 GATE Registers */
-#define S5P_CLKCON_SCLK0_MMC2_48	(1<<29)
-#define S5P_CLKCON_SCLK0_MMC1_48	(1<<28)
-#define S5P_CLKCON_SCLK0_MMC0_48	(1<<27)
-#define S5P_CLKCON_SCLK0_MMC2		(1<<26)
-#define S5P_CLKCON_SCLK0_MMC1		(1<<25)
-#define S5P_CLKCON_SCLK0_MMC0		(1<<24)
-#define S5P_CLKCON_SCLK0_SPI1_48 	(1<<23)
-#define S5P_CLKCON_SCLK0_SPI0_48 	(1<<22)
-#define S5P_CLKCON_SCLK0_SPI1		(1<<21)
-#define S5P_CLKCON_SCLK0_SPI0		(1<<20)
-#define S5P_CLKCON_SCLK0_UART		(1<<5)
-
-/* SCLK1 GATE Registers */
-
-/* MEM0 GATE Registers */
-#define S5P_CLKCON_MEM0_HCLK_NFCON	(1<<2)
-
-/*OTHERS Resgister */
-#define S5P_OTHERS_USB_SIG_MASK		(1<<16)
-#define S5P_OTHERS_HCLK_LOW_SEL_MPLL	(1<<6)
-
-/* Compatibility defines */
-#define ARM_CLK_DIV			S5P_CLK_DIV0
-#define ARM_DIV_RATIO_SHIFT		0
-#define ARM_DIV_MASK			(0xf << ARM_DIV_RATIO_SHIFT)
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h b/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
deleted file mode 100644
index 82ff753913da..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/regs-gpio.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - GPIO register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-/* Base addresses for each of the banks */
-#define S5P6440_GPA_BASE		(S5P_VA_GPIO + 0x0000)
-#define S5P6440_GPB_BASE		(S5P_VA_GPIO + 0x0020)
-#define S5P6440_GPC_BASE		(S5P_VA_GPIO + 0x0040)
-#define S5P6440_GPF_BASE		(S5P_VA_GPIO + 0x00A0)
-#define S5P6440_GPG_BASE		(S5P_VA_GPIO + 0x00C0)
-#define S5P6440_GPH_BASE		(S5P_VA_GPIO + 0x00E0)
-#define S5P6440_GPI_BASE		(S5P_VA_GPIO + 0x0100)
-#define S5P6440_GPJ_BASE		(S5P_VA_GPIO + 0x0120)
-#define S5P6440_GPN_BASE		(S5P_VA_GPIO + 0x0830)
-#define S5P6440_GPP_BASE		(S5P_VA_GPIO + 0x0160)
-#define S5P6440_GPR_BASE		(S5P_VA_GPIO + 0x0290)
-#define S5P6440_EINT0CON0		(S5P_VA_GPIO + 0x900)
-#define S5P6440_EINT0FLTCON0		(S5P_VA_GPIO + 0x910)
-#define S5P6440_EINT0FLTCON1		(S5P_VA_GPIO + 0x914)
-#define S5P6440_EINT0MASK		(S5P_VA_GPIO + 0x920)
-#define S5P6440_EINT0PEND		(S5P_VA_GPIO + 0x924)
-
-/* for LCD */
-#define S5P6440_SPCON_LCD_SEL_RGB	(1 << 0)
-#define S5P6440_SPCON_LCD_SEL_MASK	(3 << 0)
-
-/* These set of macros are not really useful for the
- * GPF/GPI/GPJ/GPN/GPP,
- * useful for others set of GPIO's (4 bit)
- */
-#define S5P6440_GPIO_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-#define S5P6440_GPIO_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S5P6440_GPIO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-
-/* Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit)
- * */
-#define S5P6440_GPIO2_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S5P6440_GPIO2_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
-#define S5P6440_GPIO2_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-irq.h b/arch/arm/mach-s5p6440/include/mach/regs-irq.h
deleted file mode 100644
index a961f4beeb0c..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/regs-irq.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/regs-irq.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - IRQ register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_IRQ_H
-#define __ASM_ARCH_REGS_IRQ_H __FILE__
-
-#include <asm/hardware/vic.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h b/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
deleted file mode 100644
index 5fbca50d1cfb..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __S5P6440_PLAT_SPI_CLKS_H
-#define __S5P6440_PLAT_SPI_CLKS_H __FILE__
-
-#define S5P6440_SPI_SRCCLK_PCLK		0
-#define S5P6440_SPI_SRCCLK_SCLK		1
-
-#endif /* __S5P6440_PLAT_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/system.h b/arch/arm/mach-s5p6440/include/mach/system.h
deleted file mode 100644
index d2dd817da66a..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/system.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-
-static void arch_reset(char mode, const char *cmd)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p6440/include/mach/tick.h
deleted file mode 100644
index 2f25c7f07970..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/tick.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/tick.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX	(0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/timex.h b/arch/arm/mach-s5p6440/include/mach/timex.h
deleted file mode 100644
index fb2e8cd40829..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c64xx/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/uncompress.h b/arch/arm/mach-s5p6440/include/mach/uncompress.h
deleted file mode 100644
index 7c1f600d65c0..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/uncompress.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/include/mach/uncompress.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
-}
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
deleted file mode 100644
index 16df257b1dce..000000000000
--- a/arch/arm/mach-s5p6440/include/mach/vmalloc.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* arch/arm/mach-s5p6440/include/mach/vmalloc.h
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C6400 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END	  (0xE0000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6440/init.c b/arch/arm/mach-s5p6440/init.c
deleted file mode 100644
index a1f3727e4021..000000000000
--- a/arch/arm/mach-s5p6440/init.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/init.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P6440 - Init support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5p6440.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc s5p6440_serial_clocks[] = {
-	[0] = {
-		.name		= "pclk_low",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-	[1] = {
-		.name		= "uclk1",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
-/* uart registration process */
-void __init s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->clocks = s5p6440_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(s5p6440_serial_clocks);
-		}
-	}
-
-	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
deleted file mode 100644
index 8291fecc701a..000000000000
--- a/arch/arm/mach-s5p6440/mach-smdk6440.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/mach-smdk6440.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/s5p6440.h>
-#include <plat/clock.h>
-#include <mach/regs-clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/adc.h>
-#include <plat/ts.h>
-
-#define S5P6440_UCON_DEFAULT    (S3C2410_UCON_TXILEVEL |	\
-				S3C2410_UCON_RXILEVEL |		\
-				S3C2410_UCON_TXIRQMODE |	\
-				S3C2410_UCON_RXIRQMODE |	\
-				S3C2410_UCON_RXFIFO_TOI |	\
-				S3C2443_UCON_RXERR_IRQEN)
-
-#define S5P6440_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define S5P6440_UFCON_DEFAULT   (S3C2410_UFCON_FIFOMODE |	\
-				S3C2440_UFCON_TXTRIG16 |	\
-				S3C2410_UFCON_RXTRIG8)
-
-static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = S5P6440_UCON_DEFAULT,
-		.ulcon	     = S5P6440_ULCON_DEFAULT,
-		.ufcon	     = S5P6440_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = S5P6440_UCON_DEFAULT,
-		.ulcon	     = S5P6440_ULCON_DEFAULT,
-		.ufcon	     = S5P6440_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = S5P6440_UCON_DEFAULT,
-		.ulcon	     = S5P6440_ULCON_DEFAULT,
-		.ufcon	     = S5P6440_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = S5P6440_UCON_DEFAULT,
-		.ulcon	     = S5P6440_ULCON_DEFAULT,
-		.ufcon	     = S5P6440_UFCON_DEFAULT,
-	},
-};
-
-static struct platform_device *smdk6440_devices[] __initdata = {
-	&s5p6440_device_iis,
-	&s3c_device_adc,
-	&s3c_device_ts,
-	&s3c_device_wdt,
-};
-
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
-static void __init smdk6440_map_io(void)
-{
-	s5p_init_io(NULL, 0, S5P_SYS_ID);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
-}
-
-static void __init smdk6440_machine_init(void)
-{
-	s3c24xx_ts_set_platdata(&s3c_ts_platform);
-
-	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
-}
-
-MACHINE_START(SMDK6440, "SMDK6440")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S5P_PA_SDRAM + 0x100,
-
-	.init_irq	= s5p6440_init_irq,
-	.map_io		= smdk6440_map_io,
-	.init_machine	= smdk6440_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END
diff --git a/arch/arm/mach-s5p6440/setup-i2c0.c b/arch/arm/mach-s5p6440/setup-i2c0.c
deleted file mode 100644
index 69e8a664aedb..000000000000
--- a/arch/arm/mach-s5p6440/setup-i2c0.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/iic.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	/* Will be populated later */
-}
diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig
index 0fd41b447915..33569e4007c4 100644
--- a/arch/arm/mach-s5p6442/Kconfig
+++ b/arch/arm/mach-s5p6442/Kconfig
@@ -11,7 +11,6 @@ if ARCH_S5P6442
 
 config CPU_S5P6442
 	bool
-	select PLAT_S5P
 	select S3C_PL330_DMA
 	help
 	  Enable S5P6442 CPU support
@@ -19,6 +18,7 @@ config CPU_S5P6442
 config MACH_SMDK6442
 	bool "SMDK6442"
 	select CPU_S5P6442
+	select S3C_DEV_WDT
 	help
 	  Machine support for Samsung SMDK6442
 
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
index 087e57f20ad5..16d6e7e61b50 100644
--- a/arch/arm/mach-s5p6442/clock.c
+++ b/arch/arm/mach-s5p6442/clock.c
@@ -192,6 +192,11 @@ static struct clk clk_pclkd1 = {
 	.parent		= &clk_hclkd1,
 };
 
+int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
+}
+
 int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
@@ -335,6 +340,16 @@ void __init_or_cpufreq s5p6442_setup_clocks(void)
 	clk_pclkd1.rate = pclkd1;
 }
 
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "pdma",
+		.id		= -1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 3),
+	},
+};
+
 static struct clk init_clocks[] = {
 	{
 		.name		= "systimer",
@@ -361,6 +376,12 @@ static struct clk init_clocks[] = {
 		.enable		= s5p6442_clk_ip3_ctrl,
 		.ctrlbit	= (1<<19),
 	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
 		.name		= "timers",
 		.id		= -1,
 		.parent		= &clk_pclkd1,
@@ -387,10 +408,23 @@ static struct clk *clks[] __initdata = {
 
 void __init s5p6442_register_clocks(void)
 {
+	struct clk *clkptr;
+	int i, ret;
+
 	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
+	clkptr = init_clocks_disable;
+	for (i = 0; i < ARRAY_SIZE(init_clocks_disable); i++, clkptr++) {
+		ret = s3c24xx_register_clock(clkptr);
+		if (ret < 0) {
+			printk(KERN_ERR "Fail to register clock %s (%d)\n",
+					clkptr->name, ret);
+		} else
+			(clkptr->enable)(clkptr, 0);
+	}
+
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c
index a48fb553fd01..842af86bda6d 100644
--- a/arch/arm/mach-s5p6442/cpu.c
+++ b/arch/arm/mach-s5p6442/cpu.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-s5p6442/cpu.c
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ *		http://www.samsung.com
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,6 +19,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -47,10 +48,30 @@ static struct map_desc s5p6442_iodesc[] __initdata = {
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5P6442_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5P6442_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5P6442_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)VA_VIC2,
 		.pfn		= __phys_to_pfn(S5P6442_PA_VIC2),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
 	}
 };
 
@@ -62,10 +83,11 @@ static void s5p6442_idle(void)
 	local_irq_enable();
 }
 
-/* s5p6442_map_io
+/*
+ * s5p6442_map_io
  *
  * register the standard cpu IO areas
-*/
+ */
 
 void __init s5p6442_map_io(void)
 {
diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c
index cb801e1f5e23..3462197ff352 100644
--- a/arch/arm/mach-s5p6442/dev-audio.c
+++ b/arch/arm/mach-s5p6442/dev-audio.c
@@ -10,33 +10,27 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/audio.h>
 
-#include <mach/gpio.h>
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
 
 static int s5p6442_cfg_i2s(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
 	case 1:
-		s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(2));
+		base = S5P6442_GPC1(0);
 		break;
 
 	case -1:
-		s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(2));
+		base = S5P6442_GPC0(0);
 		break;
 
 	default:
@@ -44,6 +38,7 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
 	return 0;
 }
 
@@ -111,21 +106,15 @@ struct platform_device s5p6442_device_iis1 = {
 
 static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(3));
+		base = S5P6442_GPC0(0);
 		break;
 
 	case 1:
-		s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(3));
+		base = S5P6442_GPC1(0);
 		break;
 
 	default:
@@ -133,6 +122,7 @@ static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
 	return 0;
 }
 
diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c
index 30199525daca..cce8c2470709 100644
--- a/arch/arm/mach-s5p6442/dev-spi.c
+++ b/arch/arm/mach-s5p6442/dev-spi.c
@@ -10,11 +10,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/spi-clocks.h>
 
 #include <plat/s3c64xx-spi.h>
@@ -38,11 +38,9 @@ static int s5p6442_spi_cfg_gpio(struct platform_device *pdev)
 	switch (pdev->id) {
 	case 0:
 		s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPB(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPB(3), S3C_GPIO_SFN(2));
 		s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6442_GPB(2), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6442_GPB(3), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgall_range(S5P6442_GPB(2), 2,
+				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 		break;
 
 	default:
diff --git a/arch/arm/mach-s5p6442/dma.c b/arch/arm/mach-s5p6442/dma.c
index ad4f8704b93d..7dfb13654f8a 100644
--- a/arch/arm/mach-s5p6442/dma.c
+++ b/arch/arm/mach-s5p6442/dma.c
@@ -82,7 +82,7 @@ static struct s3c_pl330_platdata s5p6442_pdma_pdata = {
 
 static struct platform_device s5p6442_device_pdma = {
 	.name		= "s3c-pl330",
-	.id		= 1,
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(s5p6442_pdma_resource),
 	.resource	= s5p6442_pdma_resource,
 	.dev		= {
diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
index bb6536147ffb..e2213205d780 100644
--- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
@@ -15,13 +15,12 @@
 #include <mach/map.h>
 #include <plat/regs-serial.h>
 
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
index 02c23749c023..3fbc6c3ad2da 100644
--- a/arch/arm/mach-s5p6442/include/mach/irqs.h
+++ b/arch/arm/mach-s5p6442/include/mach/irqs.h
@@ -32,7 +32,7 @@
 #define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
 
 /* VIC1 */
-#define IRQ_nPMUIRQ 		S5P_IRQ_VIC1(0)
+#define IRQ_PMU			S5P_IRQ_VIC1(0)
 #define IRQ_ONENAND 		S5P_IRQ_VIC1(7)
 #define IRQ_UART0 		S5P_IRQ_VIC1(10)
 #define IRQ_UART1 		S5P_IRQ_VIC1(11)
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
index 32ca424ef7f9..31fb2e68d527 100644
--- a/arch/arm/mach-s5p6442/include/mach/map.h
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -23,16 +23,10 @@
 #define S5P_PA_SYSCON		S5P6442_PA_SYSCON
 
 #define S5P6442_PA_GPIO		(0xE0200000)
-#define S5P_PA_GPIO		S5P6442_PA_GPIO
 
 #define S5P6442_PA_VIC0		(0xE4000000)
-#define S5P_PA_VIC0		S5P6442_PA_VIC0
-
 #define S5P6442_PA_VIC1		(0xE4100000)
-#define S5P_PA_VIC1		S5P6442_PA_VIC1
-
 #define S5P6442_PA_VIC2		(0xE4200000)
-#define S5P_PA_VIC2		S5P6442_PA_VIC2
 
 #define S5P6442_PA_MDMA		0xE8000000
 #define S5P6442_PA_PDMA		0xE9000000
@@ -42,6 +36,8 @@
 
 #define S5P6442_PA_SYSTIMER   	(0xEA100000)
 
+#define S5P6442_PA_WATCHDOG	(0xEA200000)
+
 #define S5P6442_PA_UART		(0xEC000000)
 
 #define S5P_PA_UART0		(S5P6442_PA_UART + 0x0)
@@ -65,6 +61,7 @@
 #define S5P6442_PA_PCM1		0xF2500000
 
 /* compatibiltiy defines. */
+#define S3C_PA_WDT		S5P6442_PA_WATCHDOG
 #define S3C_PA_UART		S5P6442_PA_UART
 #define S3C_PA_IIC		S5P6442_PA_IIC0
 
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
index d8360b5d4ece..00828a336991 100644
--- a/arch/arm/mach-s5p6442/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
@@ -46,6 +46,7 @@
 #define S5P_CLK_DIV5		S5P_CLKREG(0x314)
 #define S5P_CLK_DIV6		S5P_CLKREG(0x318)
 
+#define S5P_CLKGATE_IP0		S5P_CLKREG(0x460)
 #define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
 
 /* CLK_OUT */
diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h
index 8bcd8ed0c3c3..c30c1cc1b97e 100644
--- a/arch/arm/mach-s5p6442/include/mach/system.h
+++ b/arch/arm/mach-s5p6442/include/mach/system.h
@@ -13,12 +13,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
+#include <plat/system-reset.h>
 
-static void arch_reset(char mode, const char *cmd)
+static void arch_idle(void)
 {
 	/* nothing here yet */
 }
diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
index be3333688c20..4aa55e55ac47 100644
--- a/arch/arm/mach-s5p6442/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
@@ -12,6 +12,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c
index ebcf99777259..819fd80d00af 100644
--- a/arch/arm/mach-s5p6442/mach-smdk6442.c
+++ b/arch/arm/mach-s5p6442/mach-smdk6442.c
@@ -27,16 +27,16 @@
 #include <plat/cpu.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5P6442_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define SMDK6442_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5P6442_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define SMDK6442_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5P6442_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+#define SMDK6442_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
 				 S5PV210_UFCON_TXTRIG4 |	\
 				 S5PV210_UFCON_RXTRIG4)
 
@@ -44,28 +44,29 @@ static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
-		.ucon		= S5P6442_UCON_DEFAULT,
-		.ulcon		= S5P6442_ULCON_DEFAULT,
-		.ufcon		= S5P6442_UFCON_DEFAULT,
+		.ucon		= SMDK6442_UCON_DEFAULT,
+		.ulcon		= SMDK6442_ULCON_DEFAULT,
+		.ufcon		= SMDK6442_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
-		.ucon		= S5P6442_UCON_DEFAULT,
-		.ulcon		= S5P6442_ULCON_DEFAULT,
-		.ufcon		= S5P6442_UFCON_DEFAULT,
+		.ucon		= SMDK6442_UCON_DEFAULT,
+		.ulcon		= SMDK6442_ULCON_DEFAULT,
+		.ufcon		= SMDK6442_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
-		.ucon		= S5P6442_UCON_DEFAULT,
-		.ulcon		= S5P6442_ULCON_DEFAULT,
-		.ufcon		= S5P6442_UFCON_DEFAULT,
+		.ucon		= SMDK6442_UCON_DEFAULT,
+		.ulcon		= SMDK6442_ULCON_DEFAULT,
+		.ufcon		= SMDK6442_UFCON_DEFAULT,
 	},
 };
 
 static struct platform_device *smdk6442_devices[] __initdata = {
 	&s5p6442_device_iis0,
+	&s3c_device_wdt,
 };
 
 static void __init smdk6442_map_io(void)
@@ -82,8 +83,6 @@ static void __init smdk6442_machine_init(void)
 
 MACHINE_START(SMDK6442, "SMDK6442")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5p6442_init_irq,
 	.map_io		= smdk6442_map_io,
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
new file mode 100644
index 000000000000..164d2783d381
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -0,0 +1,55 @@
+# arch/arm/mach-s5p64x0/Kconfig
+#
+# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+if ARCH_S5P64X0
+
+config CPU_S5P6440
+	bool
+	select S3C_PL330_DMA
+	help
+	  Enable S5P6440 CPU support
+
+config CPU_S5P6450
+	bool
+	select S3C_PL330_DMA
+	help
+	  Enable S5P6450 CPU support
+
+config S5P64X0_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+# machine support
+
+config MACH_SMDK6440
+	bool "SMDK6440"
+	select CPU_S5P6440
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C64XX_DEV_SPI
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_I2C1
+	help
+	  Machine support for the Samsung SMDK6440
+
+config MACH_SMDK6450
+	bool "SMDK6450"
+	select CPU_S5P6450
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C64XX_DEV_SPI
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select S5P64X0_SETUP_I2C1
+	help
+	  Machine support for the Samsung SMDK6450
+
+endif
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
new file mode 100644
index 000000000000..2655829e6bf8
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -0,0 +1,30 @@
+# arch/arm/mach-s5p64x0/Makefile
+#
+# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5P64X0 system
+
+obj-$(CONFIG_ARCH_S5P64X0)	+= cpu.o init.o clock.o dma.o
+obj-$(CONFIG_ARCH_S5P64X0)	+= setup-i2c0.o
+obj-$(CONFIG_CPU_S5P6440)	+= clock-s5p6440.o gpio.o
+obj-$(CONFIG_CPU_S5P6450)	+= clock-s5p6450.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
+obj-$(CONFIG_MACH_SMDK6450)	+= mach-smdk6450.o
+
+# device support
+
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+
+obj-$(CONFIG_S5P64X0_SETUP_I2C1)	+= setup-i2c1.o
diff --git a/arch/arm/mach-s5p6440/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot
index ff90aa13bd67..ff90aa13bd67 100644
--- a/arch/arm/mach-s5p6440/Makefile.boot
+++ b/arch/arm/mach-s5p64x0/Makefile.boot
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
new file mode 100644
index 000000000000..e4883dc1c8d7
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -0,0 +1,629 @@
+/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P6440 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/s5p64x0-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6440.h>
+
+static u32 epll_div[][5] = {
+	{ 36000000,	0,	48, 1, 4 },
+	{ 48000000,	0,	32, 1, 3 },
+	{ 60000000,	0,	40, 1, 3 },
+	{ 72000000,	0,	48, 1, 3 },
+	{ 84000000,	0,	28, 1, 2 },
+	{ 96000000,	0,	32, 1, 2 },
+	{ 32768000,	45264,	43, 1, 4 },
+	{ 45158000,	6903,	30, 1, 3 },
+	{ 49152000,	50332,	32, 1, 3 },
+	{ 67738000,	10398,	45, 1, 3 },
+	{ 73728000,	9961,	49, 1, 3 }
+};
+
+static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P64X0_EPLL_CON);
+	epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
+
+	epll_con_k &= ~(PLL90XX_KDIV_MASK);
+	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		 if (epll_div[i][0] == rate) {
+			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P64X0_EPLL_CON);
+	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+
+	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+			clk->rate, rate);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5p6440_epll_ops = {
+	.get_rate = s5p_epll_get_rate,
+	.set_rate = s5p6440_epll_set_rate,
+};
+
+static struct clksrc_clk clk_hclk = {
+	.clk	= {
+		.name		= "clk_hclk",
+		.id		= -1,
+		.parent		= &clk_armclk.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk = {
+	.clk	= {
+		.name		= "clk_pclk",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
+};
+static struct clksrc_clk clk_hclk_low = {
+	.clk	= {
+		.name		= "clk_hclk_low",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+	.clk	= {
+		.name		= "clk_pclk_low",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
+};
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_mem_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "post",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 5)
+	}, {
+		.name		= "2d",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "pdma",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 20)
+	}, {
+		.name		= "irom",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "hclk_fimgvg",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "tsi",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "pcm",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "gps",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "i2s_v40",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
+		.name		= "dsim",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 28),
+	}, {
+		.name		= "etm",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 29),
+	}, {
+		.name		= "dmc0",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 30),
+	}, {
+		.name		= "pclk_fimgvg",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 31),
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 23),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 27),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 28),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 29),
+	},
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "mem",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 18),
+	},
+};
+
+static struct clk clk_iis_cd_v40 = {
+	.name		= "iis_cdclk_v40",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd = {
+	.name		= "pcm_cdclk",
+	.id		= -1,
+};
+
+static struct clk *clkset_group1_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_group1 = {
+	.sources	= clkset_group1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_audio_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_fin_epll,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio = {
+	.sources	= clkset_audio_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit	= (1 << 24),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit	= (1 << 25),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit	= (1 << 26),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit	= (1 << 5),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 0,
+			.ctrlbit	= (1 << 20),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 1,
+			.ctrlbit	= (1 << 21),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_post",
+			.id		= -1,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_dispcon",
+			.id		= -1,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimgvg",
+			.id		= -1,
+			.ctrlbit	= (1 << 2),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio2",
+			.id		= -1,
+			.ctrlbit	= (1 << 11),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_audio,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 },
+	},
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_dout_mpll,
+	&clk_armclk,
+	&clk_hclk,
+	&clk_pclk,
+	&clk_hclk_low,
+	&clk_pclk_low,
+};
+
+void __init_or_cpufreq s5p6440_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk_low;
+	unsigned long pclk;
+	unsigned long pclk_low;
+
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned int ptr;
+
+	/* Set S5P6440 functions for clk_fout_epll */
+
+	clk_fout_epll.enable = s5p_epll_enable;
+	clk_fout_epll.ops = &s5p6440_epll_ops;
+
+	clk_48m.enable = s5p64x0_clk48m_ctrl;
+
+	xtal_clk = clk_get(NULL, "ext_xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
+	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
+				__raw_readl(S5P64X0_EPLL_CON_K));
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+
+	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+			" E=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
+
+	fclk = clk_get_rate(&clk_armclk.clk);
+	hclk = clk_get_rate(&clk_hclk.clk);
+	pclk = clk_get_rate(&clk_pclk.clk);
+	hclk_low = clk_get_rate(&clk_hclk_low.clk);
+	pclk_low = clk_get_rate(&clk_pclk_low.clk);
+
+	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+			print_mhz(hclk), print_mhz(hclk_low),
+			print_mhz(pclk), print_mhz(pclk_low));
+
+	clk_f.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+};
+
+void __init s5p6440_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
new file mode 100644
index 000000000000..7dbf3c968f53
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -0,0 +1,658 @@
+/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P6450 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/s5p64x0-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6450.h>
+
+static struct clksrc_clk clk_mout_dpll = {
+	.clk	= {
+		.name		= "mout_dpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_dpll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 },
+};
+
+static u32 epll_div[][5] = {
+	{ 133000000,	27307,	55, 2, 2 },
+	{ 100000000,	43691,	41, 2, 2 },
+	{ 480000000,	0,	80, 2, 0 },
+};
+
+static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P64X0_EPLL_CON);
+	epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
+
+	epll_con_k &= ~(PLL90XX_KDIV_MASK);
+	epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		 if (epll_div[i][0] == rate) {
+			epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+			epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+				    (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+				    (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P64X0_EPLL_CON);
+	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+
+	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+			clk->rate, rate);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5p6450_epll_ops = {
+	.get_rate = s5p_epll_get_rate,
+	.set_rate = s5p6450_epll_set_rate,
+};
+
+static struct clksrc_clk clk_dout_epll = {
+	.clk	= {
+		.name		= "dout_epll",
+		.id		= -1,
+		.parent		= &clk_mout_epll.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 },
+};
+
+static struct clksrc_clk clk_mout_hclk_sel = {
+	.clk	= {
+		.name		= "mout_hclk_sel",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 },
+};
+
+static struct clk *clkset_hclk_list[] = {
+	&clk_mout_hclk_sel.clk,
+	&clk_armclk.clk,
+};
+
+static struct clksrc_sources clkset_hclk = {
+	.sources	= clkset_hclk_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclk_list),
+};
+
+static struct clksrc_clk clk_hclk = {
+	.clk	= {
+		.name		= "clk_hclk",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk = {
+	.clk	= {
+		.name		= "clk_pclk",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+	},
+	.reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
+};
+static struct clksrc_clk clk_dout_pwm_ratio0 = {
+	.clk	= {
+		.name		= "clk_dout_pwm_ratio0",
+		.id		= -1,
+		.parent		= &clk_mout_hclk_sel.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_to_wdt_pwm = {
+	.clk	= {
+		.name		= "clk_pclk_to_wdt_pwm",
+		.id		= -1,
+		.parent		= &clk_dout_pwm_ratio0.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 },
+};
+
+static struct clksrc_clk clk_hclk_low = {
+	.clk	= {
+		.name		= "clk_hclk_low",
+		.id		= -1,
+	},
+	.sources	= &clkset_hclk_low,
+	.reg_src	= { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+	.clk	= {
+		.name		= "clk_pclk_low",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
+};
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "usbhost",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "pdma",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 19),
+	}, {
+		.name		= "usbotg",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 20),
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5p64x0_hclk1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "i2c",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 22),
+	}, {
+		.name		= "iis",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
+		.name		= "i2c",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 27),
+	}, {
+		.name		= "dmc0",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 30),
+	}
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "mem",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_pclk_to_wdt_pwm.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p64x0_pclk_ctrl,
+		.ctrlbit	= (1 << 18),
+	},
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_mali_list[] = {
+	&clk_mout_epll.clk,
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_mali = {
+	.sources	= clkset_mali_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mali_list),
+};
+
+static struct clk *clkset_group2_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+};
+
+static struct clksrc_sources clkset_group2 = {
+	.sources	= clkset_group2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group2_list),
+};
+
+static struct clk *clkset_dispcon_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+	&clk_mout_dpll.clk,
+};
+
+static struct clksrc_sources clkset_dispcon = {
+	.sources	= clkset_dispcon_list,
+	.nr_sources	= ARRAY_SIZE(clkset_dispcon_list),
+};
+
+static struct clk *clkset_hsmmc44_list[] = {
+	&clk_dout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_ext_xtal_mux,
+	&s5p_clk_27m,
+	&clk_48m,
+};
+
+static struct clksrc_sources clkset_hsmmc44 = {
+	.sources	= clkset_hsmmc44_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hsmmc44_list),
+};
+
+static struct clk *clkset_sclk_audio0_list[] = {
+	[0] = &clk_dout_epll.clk,
+	[1] = &clk_dout_mpll.clk,
+	[2] = &clk_ext_xtal_mux,
+	[3] = NULL,
+	[4] = NULL,
+};
+
+static struct clksrc_sources clkset_sclk_audio0 = {
+	.sources	= clkset_sclk_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio0_list),
+};
+
+static struct clksrc_clk clk_sclk_audio0 = {
+	.clk		= {
+		.name		= "audio-bus",
+		.id		= -1,
+		.enable		= s5p64x0_sclk_ctrl,
+		.ctrlbit	= (1 << 8),
+		.parent		= &clk_dout_epll.clk,
+	},
+	.sources	= &clkset_sclk_audio0,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 },
+	.reg_div	= { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "sclk_mmc",
+			.id		= 0,
+			.ctrlbit	= (1 << 24),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_mmc",
+			.id		= 1,
+			.ctrlbit	= (1 << 25),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_mmc",
+			.id		= 2,
+			.ctrlbit	= (1 << 26),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit	= (1 << 5),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 0,
+			.ctrlbit	= (1 << 20),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 1,
+			.ctrlbit	= (1 << 21),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= -1,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "aclk_mali",
+			.id		= -1,
+			.ctrlbit	= (1 << 2),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_mali,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_2d",
+			.id		= -1,
+			.ctrlbit	= (1 << 12),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_mali,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_usi",
+			.id		= -1,
+			.ctrlbit	= (1 << 7),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_camif",
+			.id		= -1,
+			.ctrlbit	= (1 << 6),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_dispcon",
+			.id		= -1,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5p64x0_sclk1_ctrl,
+		},
+		.sources = &clkset_dispcon,
+		.reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_hsmmc44",
+			.id		= -1,
+			.ctrlbit	= (1 << 30),
+			.enable		= s5p64x0_sclk_ctrl,
+		},
+		.sources = &clkset_hsmmc44,
+		.reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 },
+		.reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 },
+	},
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_dout_epll,
+	&clk_mout_mpll,
+	&clk_dout_mpll,
+	&clk_armclk,
+	&clk_mout_hclk_sel,
+	&clk_dout_pwm_ratio0,
+	&clk_pclk_to_wdt_pwm,
+	&clk_hclk,
+	&clk_pclk,
+	&clk_hclk_low,
+	&clk_pclk_low,
+	&clk_sclk_audio0,
+};
+
+void __init_or_cpufreq s5p6450_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+
+	unsigned long xtal;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long hclk_low;
+	unsigned long pclk;
+	unsigned long pclk_low;
+
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned long dpll;
+	unsigned int ptr;
+
+	/* Set S5P6450 functions for clk_fout_epll */
+
+	clk_fout_epll.enable = s5p_epll_enable;
+	clk_fout_epll.ops = &s5p6450_epll_ops;
+
+	clk_48m.enable = s5p64x0_clk48m_ctrl;
+
+	xtal_clk = clk_get(NULL, "ext_xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
+	epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
+				__raw_readl(S5P64X0_EPLL_CON_K));
+	dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON),
+				__raw_readl(S5P6450_DPLL_CON_K), pll_4650c);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_dpll.rate = dpll;
+
+	printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+			" E=%ld.%ldMHz, D=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll),
+			print_mhz(dpll));
+
+	fclk = clk_get_rate(&clk_armclk.clk);
+	hclk = clk_get_rate(&clk_hclk.clk);
+	pclk = clk_get_rate(&clk_pclk.clk);
+	hclk_low = clk_get_rate(&clk_hclk_low.clk);
+	pclk_low = clk_get_rate(&clk_pclk_low.clk);
+
+	printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+			print_mhz(hclk), print_mhz(hclk_low),
+			print_mhz(pclk), print_mhz(pclk_low));
+
+	clk_f.rate = fclk;
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+void __init s5p6450_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
new file mode 100644
index 000000000000..b52c6e2f37a6
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock.c
@@ -0,0 +1,235 @@
+/* linux/arch/arm/mach-s5p64x0/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6450.h>
+
+struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+struct clksrc_clk clk_mout_mpll = {
+	.clk	= {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 },
+};
+
+struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 },
+};
+
+enum perf_level {
+	L0 = 532*1000,
+	L1 = 266*1000,
+	L2 = 133*1000,
+};
+
+static const u32 clock_table[][3] = {
+	/*{ARM_CLK, DIVarm, DIVhclk}*/
+	{L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+	{L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+};
+
+unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv;
+
+	/* divisor mask starts at bit0, so no need to shift */
+	clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
+
+	return rate / (clkdiv + 1);
+}
+
+unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	u32 iter;
+
+	for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (rate > clock_table[iter][0])
+			return clock_table[iter-1][0];
+	}
+
+	return clock_table[ARRAY_SIZE(clock_table) - 1][0];
+}
+
+int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 round_tmp;
+	u32 iter;
+	u32 clk_div0_tmp;
+	u32 cur_rate = clk->ops->get_rate(clk);
+	unsigned long flags;
+
+	round_tmp = clk->ops->round_rate(clk, rate);
+	if (round_tmp == cur_rate)
+		return 0;
+
+
+	for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+		if (round_tmp == clock_table[iter][0])
+			break;
+	}
+
+	if (iter >= ARRAY_SIZE(clock_table))
+		iter = ARRAY_SIZE(clock_table) - 1;
+
+	local_irq_save(flags);
+	if (cur_rate > round_tmp) {
+		/* Frequency Down */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P64X0_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+
+	} else {
+		/* Frequency Up */
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+				~(S5P64X0_CLKDIV0_HCLK_MASK);
+		clk_div0_tmp |= clock_table[iter][2];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+		clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+		clk_div0_tmp |= clock_table[iter][1];
+		__raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+	}
+	local_irq_restore(flags);
+
+	clk->rate = clock_table[iter][0];
+
+	return 0;
+}
+
+struct clk_ops s5p64x0_clkarm_ops = {
+	.get_rate	= s5p64x0_armclk_get_rate,
+	.set_rate	= s5p64x0_armclk_set_rate,
+	.round_rate	= s5p64x0_armclk_round_rate,
+};
+
+struct clksrc_clk clk_armclk = {
+	.clk	= {
+		.name		= "armclk",
+		.id		= 1,
+		.parent		= &clk_mout_apll.clk,
+		.ops		= &s5p64x0_clkarm_ops,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 },
+};
+
+struct clksrc_clk clk_dout_mpll = {
+	.clk	= {
+		.name		= "dout_mpll",
+		.id		= -1,
+		.parent		= &clk_mout_mpll.clk,
+	},
+	.reg_div	= { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 },
+};
+
+struct clk *clkset_hclk_low_list[] = {
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+};
+
+struct clksrc_sources clkset_hclk_low = {
+	.sources	= clkset_hclk_low_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclk_low_list),
+};
+
+int s5p64x0_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable);
+}
+
+int s5p64x0_hclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable);
+}
+
+int s5p64x0_hclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable);
+}
+
+int s5p64x0_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable);
+}
+
+int s5p64x0_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable);
+}
+
+int s5p64x0_mem_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable);
+}
+
+int s5p64x0_clk48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5P64X0_OTHERS);
+	if (enable)
+		val |= S5P64X0_OTHERS_USB_SIG_MASK;
+	else
+		val &= ~S5P64X0_OTHERS_USB_SIG_MASK;
+
+	__raw_writel(val, S5P64X0_OTHERS);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
new file mode 100644
index 000000000000..b8d02eb4cf30
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -0,0 +1,209 @@
+/* linux/arch/arm/mach-s5p64x0/cpu.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6450.h>
+#include <plat/adc-core.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5p64x0_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5P64X0_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc s5p6440_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S5P6440_PA_UART(0)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc s5p6450_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S5P6450_PA_UART(0)),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART + SZ_512K,
+		.pfn		= __phys_to_pfn(S5P6450_PA_UART(5)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void s5p64x0_idle(void)
+{
+	unsigned long val;
+
+	if (!need_resched()) {
+		val = __raw_readl(S5P64X0_PWR_CFG);
+		val &= ~(0x3 << 5);
+		val |= (0x1 << 5);
+		__raw_writel(val, S5P64X0_PWR_CFG);
+
+		cpu_do_idle();
+	}
+	local_irq_enable();
+}
+
+/*
+ * s5p64x0_map_io
+ *
+ * register the standard CPU IO areas
+ */
+
+void __init s5p6440_map_io(void)
+{
+	/* initialize any device information early */
+	s3c_adc_setname("s3c64xx-adc");
+
+	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
+	iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+}
+
+void __init s5p6450_map_io(void)
+{
+	/* initialize any device information early */
+	s3c_adc_setname("s3c64xx-adc");
+
+	iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
+	iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+}
+
+/*
+ * s5p64x0_init_clocks
+ *
+ * register and setup the CPU clocks
+ */
+
+void __init s5p6440_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6440_register_clocks();
+	s5p6440_setup_clocks();
+}
+
+void __init s5p6450_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5p6450_register_clocks();
+	s5p6450_setup_clocks();
+}
+
+/*
+ * s5p64x0_init_irq
+ *
+ * register the CPU interrupts
+ */
+
+void __init s5p6440_init_irq(void)
+{
+	/* S5P6440 supports 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+	 * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+	 */
+	vic[0] = 0xff800ae7;
+	vic[1] = 0xffbf23e5;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+void __init s5p6450_init_irq(void)
+{
+	/* S5P6450 supports only 2 VIC */
+	u32 vic[2];
+
+	/*
+	 * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
+	 * VIC1 is missing IRQ VIC1[12, 14, 23]
+	 */
+	vic[0] = 0xff9f1fff;
+	vic[1] = 0xff7fafff;
+
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+struct sysdev_class s5p64x0_sysclass = {
+	.name	= "s5p64x0-core",
+};
+
+static struct sys_device s5p64x0_sysdev = {
+	.cls	= &s5p64x0_sysclass,
+};
+
+static int __init s5p64x0_core_init(void)
+{
+	return sysdev_class_register(&s5p64x0_sysclass);
+}
+core_initcall(s5p64x0_core_init);
+
+int __init s5p64x0_init(void)
+{
+	printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5p64x0_idle;
+
+	return sysdev_register(&s5p64x0_sysdev);
+}
diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c
new file mode 100644
index 000000000000..396bacc0a39a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/dev-audio.c
@@ -0,0 +1,152 @@
+/* linux/arch/arm/mach-s5p64x0/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5p6440_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case -1:
+		s3c_gpio_cfgpin_range(S5P6440_GPR(4), 5, S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(5));
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s5p6450_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case -1:
+		s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
+
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s5p6440_i2s_pdata = {
+	.cfg_gpio = s5p6440_cfg_i2s,
+};
+
+static struct s3c_audio_pdata s5p6450_i2s_pdata = {
+	.cfg_gpio = s5p6450_cfg_i2s,
+};
+
+static struct resource s5p64x0_iis0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_I2S,
+		.end	= S5P64X0_PA_I2S + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S0_TX,
+		.end	= DMACH_I2S0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S0_RX,
+		.end	= DMACH_I2S0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_iis = {
+	.name		= "s3c64xx-iis-v4",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p64x0_iis0_resource),
+	.resource	= s5p64x0_iis0_resource,
+	.dev = {
+		.platform_data = &s5p6440_i2s_pdata,
+	},
+};
+
+struct platform_device s5p6450_device_iis0 = {
+	.name		= "s3c64xx-iis-v4",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p64x0_iis0_resource),
+	.resource	= s5p64x0_iis0_resource,
+	.dev = {
+		.platform_data = &s5p6450_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2));
+		break;
+
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s5p6440_pcm_pdata = {
+	.cfg_gpio = s5p6440_pcm_cfg_gpio,
+};
+
+static struct resource s5p6440_pcm0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_PCM,
+		.end	= S5P64X0_PA_PCM + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_PCM0_TX,
+		.end	= DMACH_PCM0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_PCM0_RX,
+		.end	= DMACH_PCM0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_pcm = {
+	.name		= "samsung-pcm",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p6440_pcm0_resource),
+	.resource	= s5p6440_pcm0_resource,
+	.dev = {
+		.platform_data = &s5p6440_pcm_pdata,
+	},
+};
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
new file mode 100644
index 000000000000..e78ee18c76e3
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -0,0 +1,222 @@
+/* linux/arch/arm/mach-s5p64x0/dev-spi.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/regs-clock.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+
+static char *s5p64x0_spi_src_clks[] = {
+	[S5P64X0_SPI_SRCCLK_PCLK] = "pclk",
+	[S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
+{
+	unsigned int base;
+
+	switch (pdev->id) {
+	case 0:
+		base = S5P6440_GPC(0);
+		break;
+
+	case 1:
+		base = S5P6440_GPC(4);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	s3c_gpio_cfgall_range(base, 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+	return 0;
+}
+
+static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
+{
+	unsigned int base;
+
+	switch (pdev->id) {
+	case 0:
+		base = S5P6450_GPC(0);
+		break;
+
+	case 1:
+		base = S5P6450_GPC(4);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	s3c_gpio_cfgall_range(base, 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+	return 0;
+}
+
+static struct resource s5p64x0_spi0_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_SPI0,
+		.end	= S5P64X0_PA_SPI0 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPI0_TX,
+		.end	= DMACH_SPI0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_SPI0_RX,
+		.end	= DMACH_SPI0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= IRQ_SPI0,
+		.end	= IRQ_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
+	.cfg_gpio	= s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+};
+
+static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
+	.cfg_gpio	= s5p6450_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p64x0_device_spi0 = {
+	.name		= "s3c64xx-spi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p64x0_spi0_resource),
+	.resource	= s5p64x0_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource s5p64x0_spi1_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_SPI1,
+		.end	= S5P64X0_PA_SPI1 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPI1_TX,
+		.end	= DMACH_SPI1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_SPI1_RX,
+		.end	= DMACH_SPI1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= IRQ_SPI1,
+		.end	= IRQ_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
+	.cfg_gpio	= s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+};
+
+static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
+	.cfg_gpio	= s5p6450_spi_cfg_gpio,
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+};
+
+struct platform_device s5p64x0_device_spi1 = {
+	.name		= "s3c64xx-spi",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p64x0_spi1_resource),
+	.resource	= s5p64x0_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	unsigned int id;
+	struct s3c64xx_spi_info *pd;
+
+	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		if (id == 0x50000)
+			pd = &s5p6450_spi0_pdata;
+		else
+			pd = &s5p6440_spi0_pdata;
+
+		s5p64x0_device_spi0.dev.platform_data = pd;
+		break;
+	case 1:
+		if (id == 0x50000)
+			pd = &s5p6450_spi1_pdata;
+		else
+			pd = &s5p6440_spi1_pdata;
+
+		s5p64x0_device_spi1.dev.platform_data = pd;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = s5p64x0_spi_src_clks[src_clk_nr];
+}
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
new file mode 100644
index 000000000000..d7ad944b3475
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -0,0 +1,149 @@
+/* linux/arch/arm/mach-s5p64x0/dma.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/regs-clock.h>
+
+#include <plat/devs.h>
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5p64x0_pdma_resource[] = {
+	[0] = {
+		.start	= S5P64X0_PA_PDMA,
+		.end	= S5P64X0_PA_PDMA + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_DMA0,
+		.end	= IRQ_DMA0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_MAX,
+		[10] = DMACH_PCM0_TX,
+		[11] = DMACH_PCM0_RX,
+		[12] = DMACH_I2S0_TX,
+		[13] = DMACH_I2S0_RX,
+		[14] = DMACH_SPI0_TX,
+		[15] = DMACH_SPI0_RX,
+		[16] = DMACH_MAX,
+		[17] = DMACH_MAX,
+		[18] = DMACH_MAX,
+		[19] = DMACH_MAX,
+		[20] = DMACH_SPI1_TX,
+		[21] = DMACH_SPI1_RX,
+		[22] = DMACH_MAX,
+		[23] = DMACH_MAX,
+		[24] = DMACH_MAX,
+		[25] = DMACH_MAX,
+		[26] = DMACH_MAX,
+		[27] = DMACH_MAX,
+		[28] = DMACH_MAX,
+		[29] = DMACH_PWM,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_UART4_RX,
+		[9] = DMACH_UART4_TX,
+		[10] = DMACH_PCM0_TX,
+		[11] = DMACH_PCM0_RX,
+		[12] = DMACH_I2S0_TX,
+		[13] = DMACH_I2S0_RX,
+		[14] = DMACH_SPI0_TX,
+		[15] = DMACH_SPI0_RX,
+		[16] = DMACH_PCM1_TX,
+		[17] = DMACH_PCM1_RX,
+		[18] = DMACH_PCM2_TX,
+		[19] = DMACH_PCM2_RX,
+		[20] = DMACH_SPI1_TX,
+		[21] = DMACH_SPI1_RX,
+		[22] = DMACH_USI_TX,
+		[23] = DMACH_USI_RX,
+		[24] = DMACH_MAX,
+		[25] = DMACH_I2S1_TX,
+		[26] = DMACH_I2S1_RX,
+		[27] = DMACH_I2S2_TX,
+		[28] = DMACH_I2S2_RX,
+		[29] = DMACH_PWM,
+		[30] = DMACH_UART5_RX,
+		[31] = DMACH_UART5_TX,
+	},
+};
+
+static struct platform_device s5p64x0_device_pdma = {
+	.name		= "s3c-pl330",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p64x0_pdma_resource),
+	.resource	= s5p64x0_pdma_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static int __init s5p64x0_dma_init(void)
+{
+	unsigned int id;
+
+	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
+
+	if (id == 0x50000)
+		s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+	else
+		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+
+	platform_device_register(&s5p64x0_device_pdma);
+
+	return 0;
+}
+arch_initcall(s5p64x0_dma_init);
diff --git a/arch/arm/mach-s5p64x0/gpio.c b/arch/arm/mach-s5p64x0/gpio.c
new file mode 100644
index 000000000000..39159dd5a29a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/gpio.c
@@ -0,0 +1,342 @@
+/* linux/arch/arm/mach-s5p64x0/gpio.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/* To be implemented S5P6450 GPIO */
+
+/*
+ * S5P6440 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * F	2	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	8	2Bit	Yes	8
+ * R	15	4Bit[2]	Yes	8
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
+					     unsigned int offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long flags;
+
+	switch (offset) {
+	case 6:
+		offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		offset -= 7;
+		break;
+	}
+
+	s3c_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	s3c_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
+					      unsigned int offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned long flags;
+	unsigned con_offset  = offset;
+
+	switch (con_offset) {
+	case 6:
+		con_offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		con_offset -= 7;
+		break;
+	}
+
+	s3c_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	s3c_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
+				   unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift;
+	u32 con;
+
+	switch (off) {
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		shift = (off & 7) * 4;
+		reg -= 4;
+		break;
+	case 6:
+		shift = ((off + 1) & 7) * 4;
+		reg -= 4;
+	default:
+		shift = ((off + 1) & 7) * 4;
+		break;
+	}
+
+	if (s3c_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
+	{
+		.cfg_eint	= 0,
+	}, {
+		.cfg_eint	= 7,
+	}, {
+		.cfg_eint	= 3,
+		.set_config	= s5p64x0_gpio_setcfg_4bit_rbank,
+	}, {
+		.cfg_eint	= 0,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
+	}, {
+		.cfg_eint	= 2,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
+	}, {
+		.cfg_eint	= 3,
+		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
+	{
+		.base	= S5P6440_GPA_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPA(0),
+			.ngpio	= S5P6440_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.base	= S5P6440_GPB_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPB(0),
+			.ngpio	= S5P6440_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5P6440_GPC_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPC(0),
+			.ngpio	= S5P6440_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5P6440_GPG_BASE,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPG(0),
+			.ngpio	= S5P6440_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
+	{
+		.base	= S5P6440_GPH_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfgs[1],
+		.chip	= {
+			.base	= S5P6440_GPH(0),
+			.ngpio	= S5P6440_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
+	{
+		.base	= S5P6440_GPR_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfgs[2],
+		.chip	= {
+			.base	= S5P6440_GPR(0),
+			.ngpio	= S5P6440_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
+	{
+		.base	= S5P6440_GPF_BASE,
+		.config	= &s5p64x0_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPF(0),
+			.ngpio	= S5P6440_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P6440_GPI_BASE,
+		.config	= &s5p64x0_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6440_GPI(0),
+			.ngpio	= S5P6440_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P6440_GPJ_BASE,
+		.config	= &s5p64x0_gpio_cfgs[3],
+		.chip	= {
+			.base	= S5P6440_GPJ(0),
+			.ngpio	= S5P6440_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P6440_GPN_BASE,
+		.config	= &s5p64x0_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6440_GPN(0),
+			.ngpio	= S5P6440_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P6440_GPP_BASE,
+		.config	= &s5p64x0_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPP(0),
+			.ngpio	= S5P6440_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	},
+};
+
+void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chipcfg++) {
+		if (!chipcfg->set_config)
+			chipcfg->set_config	= s3c_gpio_setcfg_s3c64xx_4bit;
+		if (!chipcfg->get_config)
+			chipcfg->get_config	= s3c_gpio_getcfg_s3c64xx_4bit;
+		if (!chipcfg->set_pull)
+			chipcfg->set_pull	= s3c_gpio_setpull_updown;
+		if (!chipcfg->get_pull)
+			chipcfg->get_pull	= s3c_gpio_getpull_updown;
+	}
+}
+
+static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
+						int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
+		chip->chip.direction_output =
+					s5p64x0_gpiolib_rbank_4bit2_output;
+		s3c_gpiolib_add(chip);
+	}
+}
+
+static int __init s5p6440_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chips = s5p6440_gpio_2bit;
+	int nr_chips = ARRAY_SIZE(s5p6440_gpio_2bit);
+
+	s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
+				ARRAY_SIZE(s5p64x0_gpio_cfgs));
+
+	for (; nr_chips > 0; nr_chips--, chips++)
+		s3c_gpiolib_add(chips);
+
+	samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
+				ARRAY_SIZE(s5p6440_gpio_4bit));
+
+	samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
+				ARRAY_SIZE(s5p6440_gpio_4bit2));
+
+	s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
+				ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
+
+	return 0;
+}
+arch_initcall(s5p6440_gpiolib_init);
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
new file mode 100644
index 000000000000..79b04e6a6f8e
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -0,0 +1,33 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#include <plat/regs-serial.h>
+
+	.macro addruart, rp, rv
+		mov	\rp, #0xE0000000
+		orr	\rp, \rp, #0x00100000
+		ldr	\rp, [\rp, #0x118 ]
+		and	\rp, \rp, #0xff000
+		teq	\rp, #0x50000		@@ S5P6450
+		ldreq	\rp, =0xEC800000
+		movne	\rp, #0xEC000000	@@ S5P6440
+		ldrne	\rv, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6440/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h
index 81209eb1409b..81209eb1409b 100644
--- a/arch/arm/mach-s5p6440/include/mach/dma.h
+++ b/arch/arm/mach-s5p64x0/include/mach/dma.h
diff --git a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
new file mode 100644
index 000000000000..10b62b4f8211
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Low-level IRQ helper macros for the Samsung S5P64X0
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
new file mode 100644
index 000000000000..5486c8f01f1d
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -0,0 +1,139 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+
+#define S5P6440_GPIO_A_NR	(6)
+#define S5P6440_GPIO_B_NR	(7)
+#define S5P6440_GPIO_C_NR	(8)
+#define S5P6440_GPIO_F_NR	(2)
+#define S5P6440_GPIO_G_NR	(7)
+#define S5P6440_GPIO_H_NR	(10)
+#define S5P6440_GPIO_I_NR	(16)
+#define S5P6440_GPIO_J_NR	(12)
+#define S5P6440_GPIO_N_NR	(16)
+#define S5P6440_GPIO_P_NR	(8)
+#define S5P6440_GPIO_R_NR	(15)
+
+#define S5P6450_GPIO_A_NR	(6)
+#define S5P6450_GPIO_B_NR	(7)
+#define S5P6450_GPIO_C_NR	(8)
+#define S5P6450_GPIO_D_NR	(8)
+#define S5P6450_GPIO_F_NR	(2)
+#define S5P6450_GPIO_G_NR	(14)
+#define S5P6450_GPIO_H_NR	(10)
+#define S5P6450_GPIO_I_NR	(16)
+#define S5P6450_GPIO_J_NR	(12)
+#define S5P6450_GPIO_K_NR	(5)
+#define S5P6450_GPIO_N_NR	(16)
+#define S5P6450_GPIO_P_NR	(11)
+#define S5P6450_GPIO_Q_NR	(14)
+#define S5P6450_GPIO_R_NR	(15)
+#define S5P6450_GPIO_S_NR	(8)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5P64X0_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p6440_gpio_number {
+	S5P6440_GPIO_A_START	= 0,
+	S5P6440_GPIO_B_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_A),
+	S5P6440_GPIO_C_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_B),
+	S5P6440_GPIO_F_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_C),
+	S5P6440_GPIO_G_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_F),
+	S5P6440_GPIO_H_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_G),
+	S5P6440_GPIO_I_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_H),
+	S5P6440_GPIO_J_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_I),
+	S5P6440_GPIO_N_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_J),
+	S5P6440_GPIO_P_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_N),
+	S5P6440_GPIO_R_START	= S5P64X0_GPIO_NEXT(S5P6440_GPIO_P),
+};
+
+enum s5p6450_gpio_number {
+	S5P6450_GPIO_A_START	= 0,
+	S5P6450_GPIO_B_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_A),
+	S5P6450_GPIO_C_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_B),
+	S5P6450_GPIO_D_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_C),
+	S5P6450_GPIO_F_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_D),
+	S5P6450_GPIO_G_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_F),
+	S5P6450_GPIO_H_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_G),
+	S5P6450_GPIO_I_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_H),
+	S5P6450_GPIO_J_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_I),
+	S5P6450_GPIO_K_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_J),
+	S5P6450_GPIO_N_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_K),
+	S5P6450_GPIO_P_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_N),
+	S5P6450_GPIO_Q_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_P),
+	S5P6450_GPIO_R_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q),
+	S5P6450_GPIO_S_START	= S5P64X0_GPIO_NEXT(S5P6450_GPIO_R),
+};
+
+/* GPIO number definitions */
+
+#define S5P6440_GPA(_nr)	(S5P6440_GPIO_A_START + (_nr))
+#define S5P6440_GPB(_nr)	(S5P6440_GPIO_B_START + (_nr))
+#define S5P6440_GPC(_nr)	(S5P6440_GPIO_C_START + (_nr))
+#define S5P6440_GPF(_nr)	(S5P6440_GPIO_F_START + (_nr))
+#define S5P6440_GPG(_nr)	(S5P6440_GPIO_G_START + (_nr))
+#define S5P6440_GPH(_nr)	(S5P6440_GPIO_H_START + (_nr))
+#define S5P6440_GPI(_nr)	(S5P6440_GPIO_I_START + (_nr))
+#define S5P6440_GPJ(_nr)	(S5P6440_GPIO_J_START + (_nr))
+#define S5P6440_GPN(_nr)	(S5P6440_GPIO_N_START + (_nr))
+#define S5P6440_GPP(_nr)	(S5P6440_GPIO_P_START + (_nr))
+#define S5P6440_GPR(_nr)	(S5P6440_GPIO_R_START + (_nr))
+
+#define S5P6450_GPA(_nr)	(S5P6450_GPIO_A_START + (_nr))
+#define S5P6450_GPB(_nr)	(S5P6450_GPIO_B_START + (_nr))
+#define S5P6450_GPC(_nr)	(S5P6450_GPIO_C_START + (_nr))
+#define S5P6450_GPD(_nr)	(S5P6450_GPIO_D_START + (_nr))
+#define S5P6450_GPF(_nr)	(S5P6450_GPIO_F_START + (_nr))
+#define S5P6450_GPG(_nr)	(S5P6450_GPIO_G_START + (_nr))
+#define S5P6450_GPH(_nr)	(S5P6450_GPIO_H_START + (_nr))
+#define S5P6450_GPI(_nr)	(S5P6450_GPIO_I_START + (_nr))
+#define S5P6450_GPJ(_nr)	(S5P6450_GPIO_J_START + (_nr))
+#define S5P6450_GPK(_nr)	(S5P6450_GPIO_K_START + (_nr))
+#define S5P6450_GPN(_nr)	(S5P6450_GPIO_N_START + (_nr))
+#define S5P6450_GPP(_nr)	(S5P6450_GPIO_P_START + (_nr))
+#define S5P6450_GPQ(_nr)	(S5P6450_GPIO_Q_START + (_nr))
+#define S5P6450_GPR(_nr)	(S5P6450_GPIO_R_START + (_nr))
+#define S5P6450_GPS(_nr)	(S5P6450_GPIO_S_START + (_nr))
+
+/* the end of the S5P64X0 specific gpios */
+
+#define S5P6440_GPIO_END	(S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
+#define S5P6450_GPIO_END	(S5P6450_GPS(S5P6450_GPIO_S_NR) + 1)
+
+#define S5P64X0_GPIO_END	(S5P6440_GPIO_END > S5P6450_GPIO_END ?	\
+				 S5P6440_GPIO_END : S5P6450_GPIO_END)
+
+#define S3C_GPIO_END		S5P64X0_GPIO_END
+
+/* define the number of gpios we need to the one after the last GPIO range */
+
+#define ARCH_NR_GPIOS		(S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h
new file mode 100644
index 000000000000..d3e87996dd9a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/include/mach/i2c.h
new file mode 100644
index 000000000000..887d25209e8e
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/i2c.h
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 I2C configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev);
+
+extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev);
diff --git a/arch/arm/mach-s5p64x0/include/mach/io.h b/arch/arm/mach-s5p64x0/include/mach/io.h
new file mode 100644
index 000000000000..a3e095c02fb5
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/io.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/io.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5P64X0 based
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
new file mode 100644
index 000000000000..513abffc7604
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -0,0 +1,142 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h
+ *
+ * Copyright 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+
+#define IRQ_EINT0_3		S5P_IRQ_VIC0(0)
+#define IRQ_EINT4_11		S5P_IRQ_VIC0(1)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(2)
+#define IRQ_IIS1		S5P_IRQ_VIC0(3)	/* for only S5P6450 */
+#define IRQ_IIS2		S5P_IRQ_VIC0(4)	/* for only S5P6450 */
+#define IRQ_IIC1		S5P_IRQ_VIC0(5)
+#define IRQ_I2SV40		S5P_IRQ_VIC0(6)
+#define IRQ_GPS			S5P_IRQ_VIC0(7)	/* for only S5P6450 */
+
+#define IRQ_2D			S5P_IRQ_VIC0(11)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_WDT			S5P_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(28)
+#define IRQ_DISPCON0		S5P_IRQ_VIC0(29)
+#define IRQ_DISPCON1		S5P_IRQ_VIC0(30)
+#define IRQ_DISPCON2		S5P_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_15		S5P_IRQ_VIC1(0)
+#define IRQ_PCM0		S5P_IRQ_VIC1(2)
+#define IRQ_PCM1		S5P_IRQ_VIC1(3)	/* for only S5P6450 */
+#define IRQ_PCM2		S5P_IRQ_VIC1(4)	/* for only S5P6450 */
+#define IRQ_UART0		S5P_IRQ_VIC1(5)
+#define IRQ_UART1		S5P_IRQ_VIC1(6)
+#define IRQ_UART2		S5P_IRQ_VIC1(7)
+#define IRQ_UART3		S5P_IRQ_VIC1(8)
+#define IRQ_DMA0		S5P_IRQ_VIC1(9)
+#define IRQ_UART4		S5P_IRQ_VIC1(10)	/* S5P6450 */
+#define IRQ_UART5		S5P_IRQ_VIC1(11)	/* S5P6450 */
+#define IRQ_NFC			S5P_IRQ_VIC1(13)
+#define IRQ_USI			S5P_IRQ_VIC1(15)	/* S5P6450 */
+#define IRQ_SPI0		S5P_IRQ_VIC1(16)
+#define IRQ_SPI1		S5P_IRQ_VIC1(17)
+#define IRQ_HSMMC2		S5P_IRQ_VIC1(17)	/* Shared */
+#define IRQ_IIC			S5P_IRQ_VIC1(18)
+#define IRQ_DISPCON3		S5P_IRQ_VIC1(19)
+#define IRQ_EINT_GROUPS		S5P_IRQ_VIC1(21)
+#define IRQ_PMU			S5P_IRQ_VIC1(23)	/* S5P6440 */
+#define IRQ_HSMMC0		S5P_IRQ_VIC1(24)
+#define IRQ_HSMMC1		S5P_IRQ_VIC1(25)
+#define IRQ_OTG			S5P_IRQ_VIC1(26)
+#define IRQ_DSI			S5P_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC1(28)
+#define IRQ_TSI			S5P_IRQ_VIC1(29)
+#define IRQ_PENDN		S5P_IRQ_VIC1(30)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_ADC			S5P_IRQ_VIC1(31)
+
+/* UART interrupts, S5P6450 has 5 UARTs */
+#define IRQ_S5P_UART_BASE4	(96)
+#define IRQ_S5P_UART_BASE5	(100)
+
+#define IRQ_S5P_UART_RX4	(IRQ_S5P_UART_BASE4 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX4	(IRQ_S5P_UART_BASE4 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR4	(IRQ_S5P_UART_BASE4 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX5	(IRQ_S5P_UART_BASE5 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX5	(IRQ_S5P_UART_BASE5 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR5	(IRQ_S5P_UART_BASE5 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX4		IRQ_S5P_UART_RX4
+#define IRQ_S3CUART_RX5		IRQ_S5P_UART_RX5
+
+/* S5P6450 EINT feature will be added */
+
+/*
+ * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
+ * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
+ * after the pair of VICs.
+ */
+
+#define S5P_IRQ_EINT_BASE	(S5P_IRQ_VIC1(31) + 6)
+
+#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
+
+#define S5P_EINT_BASE1		(S5P_IRQ_EINT_BASE)
+/*
+ * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
+ * to wake up from sleep. If request is beyond this range, by mistake, a large
+ * return value for an irq number should be indication of something amiss.
+ */
+#define S5P_EINT_BASE2		(0xf0000000)
+
+/*
+ * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
+#define IRQ_EINT_GROUP1_NR	(15)
+#define IRQ_EINT_GROUP2_NR	(8)
+#define IRQ_EINT_GROUP5_NR	(7)
+#define IRQ_EINT_GROUP6_NR	(10)
+/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
+#define IRQ_EINT_GROUP8_NR	(11)
+
+#define IRQ_EINT_GROUP_BASE	S5P_EINT(16)
+#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0)
+#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+
+#define IRQ_EINT_GROUP(grp, x)	(IRQ_EINT_GROUP##grp##_BASE + (x))
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS			(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
new file mode 100644
index 000000000000..31e534156e06
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -0,0 +1,83 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/map.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P64X0_PA_SDRAM	(0x20000000)
+
+#define S5P64X0_PA_CHIPID	(0xE0000000)
+#define S5P_PA_CHIPID		S5P64X0_PA_CHIPID
+
+#define S5P64X0_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5P64X0_PA_SYSCON
+
+#define S5P64X0_PA_GPIO		(0xE0308000)
+
+#define S5P64X0_PA_VIC0		(0xE4000000)
+#define S5P64X0_PA_VIC1		(0xE4100000)
+
+#define S5P64X0_PA_PDMA		(0xE9000000)
+
+#define S5P64X0_PA_TIMER	(0xEA000000)
+#define S5P_PA_TIMER		S5P64X0_PA_TIMER
+
+#define S5P64X0_PA_RTC		(0xEA100000)
+
+#define S5P64X0_PA_WDT		(0xEA200000)
+
+#define S5P6440_PA_UART(x)	(0xEC000000 + ((x) * S3C_UART_OFFSET))
+#define S5P6450_PA_UART(x)	((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
+
+#define S5P_PA_UART0		S5P6450_PA_UART(0)
+#define S5P_PA_UART1		S5P6450_PA_UART(1)
+#define S5P_PA_UART2		S5P6450_PA_UART(2)
+#define S5P_PA_UART3		S5P6450_PA_UART(3)
+#define S5P_PA_UART4		S5P6450_PA_UART(4)
+#define S5P_PA_UART5		S5P6450_PA_UART(5)
+
+#define S5P_SZ_UART		SZ_256
+
+#define S5P6440_PA_IIC0		(0xEC104000)
+#define S5P6440_PA_IIC1		(0xEC20F000)
+#define S5P6450_PA_IIC0		(0xEC100000)
+#define S5P6450_PA_IIC1		(0xEC200000)
+
+#define S5P64X0_PA_SPI0		(0xEC400000)
+#define S5P64X0_PA_SPI1		(0xEC500000)
+
+#define S5P64X0_PA_HSOTG	(0xED100000)
+
+#define S5P64X0_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+
+#define S5P64X0_PA_I2S		(0xF2000000)
+
+#define S5P64X0_PA_PCM		(0xF2100000)
+
+#define S5P64X0_PA_ADC		(0xF3000000)
+
+/* compatibiltiy defines. */
+
+#define S3C_PA_HSMMC0		S5P64X0_PA_HSMMC(0)
+#define S3C_PA_HSMMC1		S5P64X0_PA_HSMMC(1)
+#define S3C_PA_HSMMC2		S5P64X0_PA_HSMMC(2)
+#define S3C_PA_IIC		S5P6440_PA_IIC0
+#define S3C_PA_IIC1		S5P6440_PA_IIC1
+#define S3C_PA_RTC		S5P64X0_PA_RTC
+#define S3C_PA_WDT		S5P64X0_PA_WDT
+
+#define SAMSUNG_PA_ADC		S5P64X0_PA_ADC
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h
new file mode 100644
index 000000000000..1b036b0a24ce
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H __FILE__
+
+#define PHYS_OFFSET		UL(0x20000000)
+#define CONSISTENT_DMA_SIZE	SZ_8M
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
new file mode 100644
index 000000000000..19fff8b701c0
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S5P64X0 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return 0;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK 0
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
new file mode 100644
index 000000000000..a133f22fa155
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)			(S3C_VA_SYS + (x))
+
+#define S5P64X0_APLL_CON		S5P_CLKREG(0x0C)
+#define S5P64X0_MPLL_CON		S5P_CLKREG(0x10)
+#define S5P64X0_EPLL_CON		S5P_CLKREG(0x14)
+#define S5P64X0_EPLL_CON_K		S5P_CLKREG(0x18)
+
+#define S5P64X0_CLK_SRC0		S5P_CLKREG(0x1C)
+
+#define S5P64X0_CLK_DIV0		S5P_CLKREG(0x20)
+#define S5P64X0_CLK_DIV1		S5P_CLKREG(0x24)
+#define S5P64X0_CLK_DIV2		S5P_CLKREG(0x28)
+
+#define S5P64X0_CLK_GATE_HCLK0		S5P_CLKREG(0x30)
+#define S5P64X0_CLK_GATE_PCLK		S5P_CLKREG(0x34)
+#define S5P64X0_CLK_GATE_SCLK0		S5P_CLKREG(0x38)
+#define S5P64X0_CLK_GATE_MEM0		S5P_CLKREG(0x3C)
+
+#define S5P64X0_CLK_DIV3		S5P_CLKREG(0x40)
+
+#define S5P64X0_CLK_GATE_HCLK1		S5P_CLKREG(0x44)
+#define S5P64X0_CLK_GATE_SCLK1		S5P_CLKREG(0x48)
+
+#define S5P6450_DPLL_CON		S5P_CLKREG(0x50)
+#define S5P6450_DPLL_CON_K		S5P_CLKREG(0x54)
+
+#define S5P64X0_CLK_SRC1		S5P_CLKREG(0x10C)
+
+#define S5P64X0_SYS_ID			S5P_CLKREG(0x118)
+#define S5P64X0_SYS_OTHERS		S5P_CLKREG(0x11C)
+
+#define S5P64X0_PWR_CFG			S5P_CLKREG(0x804)
+#define S5P64X0_OTHERS			S5P_CLKREG(0x900)
+
+#define S5P64X0_CLKDIV0_HCLK_SHIFT	(8)
+#define S5P64X0_CLKDIV0_HCLK_MASK	(0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
+
+#define S5P64X0_OTHERS_USB_SIG_MASK	(1 << 16)
+
+/* Compatibility defines */
+
+#define ARM_CLK_DIV			S5P64X0_CLK_DIV0
+#define ARM_DIV_RATIO_SHIFT		0
+#define ARM_DIV_MASK			(0xF << ARM_DIV_RATIO_SHIFT)
+
+#define S5P_EPLL_CON			S5P64X0_EPLL_CON
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
new file mode 100644
index 000000000000..85f448e20a8b
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -0,0 +1,62 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - GPIO register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* Will be implemented S5P6442 GPIOlib */
+
+/* Base addresses for each of the banks */
+
+#define S5P6440_GPA_BASE		(S5P_VA_GPIO + 0x0000)
+#define S5P6440_GPB_BASE		(S5P_VA_GPIO + 0x0020)
+#define S5P6440_GPC_BASE		(S5P_VA_GPIO + 0x0040)
+#define S5P6440_GPF_BASE		(S5P_VA_GPIO + 0x00A0)
+#define S5P6440_GPG_BASE		(S5P_VA_GPIO + 0x00C0)
+#define S5P6440_GPH_BASE		(S5P_VA_GPIO + 0x00E0)
+#define S5P6440_GPI_BASE		(S5P_VA_GPIO + 0x0100)
+#define S5P6440_GPJ_BASE		(S5P_VA_GPIO + 0x0120)
+#define S5P6440_GPN_BASE		(S5P_VA_GPIO + 0x0830)
+#define S5P6440_GPP_BASE		(S5P_VA_GPIO + 0x0160)
+#define S5P6440_GPR_BASE		(S5P_VA_GPIO + 0x0290)
+
+#define S5P6440_EINT0CON0		(S5P_VA_GPIO + 0x900)
+#define S5P6440_EINT0FLTCON0		(S5P_VA_GPIO + 0x910)
+#define S5P6440_EINT0FLTCON1		(S5P_VA_GPIO + 0x914)
+#define S5P6440_EINT0MASK		(S5P_VA_GPIO + 0x920)
+#define S5P6440_EINT0PEND		(S5P_VA_GPIO + 0x924)
+
+/* for LCD */
+
+#define S5P6440_SPCON_LCD_SEL_RGB	(1 << 0)
+#define S5P6440_SPCON_LCD_SEL_MASK	(3 << 0)
+
+/*
+ * These set of macros are not really useful for the
+ * GPF/GPI/GPJ/GPN/GPP, useful for others set of GPIO's (4 bit)
+ */
+
+#define S5P6440_GPIO_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+#define S5P6440_GPIO_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S5P6440_GPIO_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+
+/*
+ * Use these macros for GPF/GPI/GPJ/GPN/GPP set of GPIO (2 bit)
+ */
+
+#define S5P6440_GPIO2_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
+#define S5P6440_GPIO2_INPUT(__gpio)	(0x0 << ((__gpio) * 2))
+#define S5P6440_GPIO2_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
new file mode 100644
index 000000000000..4aaebdace55f
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
new file mode 100644
index 000000000000..ff85b4b6e8d9
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
@@ -0,0 +1,46 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for s5p64x0 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clksrc_clk clk_mout_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_mout_epll;
+
+extern int s5p64x0_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p64x0_epll_get_rate(struct clk *clk);
+
+extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk);
+extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate);
+extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate);
+
+extern struct clk_ops s5p64x0_clkarm_ops;
+
+extern struct clksrc_clk clk_armclk;
+extern struct clksrc_clk clk_dout_mpll;
+
+extern struct clk *clkset_hclk_low_list[];
+extern struct clksrc_sources clkset_hclk_low;
+
+extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_mem_ctrl(struct clk *clk, int enable);
+
+extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
new file mode 100644
index 000000000000..170a20a9643a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_CLKS_H
+#define __ASM_ARCH_SPI_CLKS_H __FILE__
+
+#define S5P64X0_SPI_SRCCLK_PCLK		0
+#define S5P64X0_SPI_SRCCLK_SCLK		1
+
+#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
new file mode 100644
index 000000000000..60f57532c970
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/system.h
@@ -0,0 +1,23 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+#include <plat/system-reset.h>
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h
new file mode 100644
index 000000000000..00aa7f1d8e51
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S5P64X0 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h
new file mode 100644
index 000000000000..4b91faa195a8
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/timex.h
@@ -0,0 +1,27 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S5P64X0 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
new file mode 100644
index 000000000000..c65b229aab23
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
@@ -0,0 +1,212 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+
+/*
+ * cannot use commonly <plat/uncompress.h>
+ * because uart base of S5P6440 and S5P6450 is different
+ */
+
+typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
+
+/* uart setup */
+
+static unsigned int fifo_mask;
+static unsigned int fifo_max;
+
+/* forward declerations */
+
+static void arch_detect_cpu(void);
+
+/* defines for UART registers */
+
+#include <plat/regs-serial.h>
+#include <plat/regs-watchdog.h>
+
+/* working in physical space... */
+#undef S3C2410_WDOGREG
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX	 (14)
+
+static unsigned long uart_base;
+
+static __inline__ void get_uart_base(void)
+{
+	unsigned int chipid;
+
+	chipid = *(const volatile unsigned int __force *) 0xE0100118;
+
+	uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT;
+
+	if ((chipid & 0xff000) == 0x50000)
+		uart_base += 0xEC800000;
+	else
+		uart_base += 0xEC000000;
+}
+
+static __inline__ void uart_wr(unsigned int reg, unsigned int val)
+{
+	volatile unsigned int *ptr;
+
+	get_uart_base();
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	*ptr = val;
+}
+
+static __inline__ unsigned int uart_rd(unsigned int reg)
+{
+	volatile unsigned int *ptr;
+
+	get_uart_base();
+	ptr = (volatile unsigned int *)(reg + uart_base);
+	return *ptr;
+}
+
+/*
+ * we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+ */
+
+static void putc(int ch)
+{
+	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+		int level;
+
+		while (1) {
+			level = uart_rd(S3C2410_UFSTAT);
+			level &= fifo_mask;
+
+			if (level < fifo_max)
+				break;
+		}
+
+	} else {
+		/* not using fifos */
+
+		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+			barrier();
+	}
+
+	/* write byte to transmission register */
+	uart_wr(S3C2410_UTXH, ch);
+}
+
+static inline void flush(void)
+{
+}
+
+#define __raw_writel(d, ad)			\
+	do {							\
+		*((volatile unsigned int __force *)(ad)) = (d); \
+	} while (0)
+
+/*
+ * CONFIG_S3C_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+ */
+
+#ifdef CONFIG_S3C_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+static inline void arch_decomp_wdog(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+	__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+#ifdef CONFIG_S3C_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+	putstr("\n\n");
+	putstr(x);
+	putstr("\n\n -- System resetting\n");
+
+	__raw_writel(0x4000, S3C2410_WTDAT);
+	__raw_writel(0x4000, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+	while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+	u32 fifocon = uart_rd(S3C2410_UFCON);
+
+	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+		fifocon |= S3C2410_UFCON_RESETBOTH;
+		uart_wr(S3C2410_UFCON, fifocon);
+
+		/* wait for fifo reset to complete */
+		while (1) {
+			fifocon = uart_rd(S3C2410_UFCON);
+			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+				break;
+		}
+	}
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+static void arch_decomp_setup(void)
+{
+	/*
+	 * we may need to setup the uart(s) here if we are not running
+	 * on an BAST... the BAST will have left the uarts configured
+	 * after calling linux.
+	 */
+
+	arch_detect_cpu();
+	arch_decomp_wdog_start();
+
+	/*
+	 * Enable the UART FIFOs if they where not enabled and our
+	 * configuration says we should turn them on.
+	 */
+
+	arch_enable_uart_fifo();
+}
+
+
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/vmalloc.h b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
new file mode 100644
index 000000000000..38dcc71a03cc
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	0xF6000000UL
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c
new file mode 100644
index 000000000000..79833caf8165
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/init.c
@@ -0,0 +1,73 @@
+/* linux/arch/arm/mach-s5p64x0/init.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P64X0 - Init support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6440.h>
+#include <plat/s5p6450.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = {
+	[0] = {
+		.name		= "pclk_low",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+	[1] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+
+void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->clocks = s5p64x0_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks);
+		}
+	}
+}
+
+void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	int uart;
+
+	for (uart = 0; uart < no; uart++) {
+		s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
+		s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
+	}
+
+	s5p64x0_common_init_uarts(cfg, no);
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s5p64x0_common_init_uarts(cfg, no);
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
new file mode 100644
index 000000000000..87c3f03c618c
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -0,0 +1,161 @@
+/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/i2c.h>
+
+#include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/s5p6440.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+#include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
+
+#define SMDK6440_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				S3C2410_UCON_RXILEVEL |		\
+				S3C2410_UCON_TXIRQMODE |	\
+				S3C2410_UCON_RXIRQMODE |	\
+				S3C2410_UCON_RXFIFO_TOI |	\
+				S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK6440_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDK6440_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				S3C2440_UFCON_TXTRIG16 |	\
+				S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK6440_UCON_DEFAULT,
+		.ulcon		= SMDK6440_ULCON_DEFAULT,
+		.ufcon		= SMDK6440_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *smdk6440_devices[] __initdata = {
+	&s3c_device_adc,
+	&s3c_device_rtc,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_ts,
+	&s3c_device_wdt,
+	&s5p6440_device_iis,
+};
+
+static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6440_i2c0_cfg_gpio,
+};
+
+static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 1,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6440_i2c1_cfg_gpio,
+};
+
+static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = {
+	/* To be populated */
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+static void __init smdk6440_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
+}
+
+static void __init smdk6440_machine_init(void)
+{
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
+	s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
+	i2c_register_board_info(0, smdk6440_i2c_devs0,
+			ARRAY_SIZE(smdk6440_i2c_devs0));
+	i2c_register_board_info(1, smdk6440_i2c_devs1,
+			ARRAY_SIZE(smdk6440_i2c_devs1));
+
+	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
+}
+
+MACHINE_START(SMDK6440, "SMDK6440")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.boot_params	= S5P64X0_PA_SDRAM + 0x100,
+
+	.init_irq	= s5p6440_init_irq,
+	.map_io		= smdk6440_map_io,
+	.init_machine	= smdk6440_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
new file mode 100644
index 000000000000..d609f5af2b98
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -0,0 +1,180 @@
+/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/i2c.h>
+
+#include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/s5p6450.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+#include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
+
+#define SMDK6450_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				S3C2410_UCON_RXILEVEL |		\
+				S3C2410_UCON_TXIRQMODE |	\
+				S3C2410_UCON_RXIRQMODE |	\
+				S3C2410_UCON_RXFIFO_TOI |	\
+				S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK6450_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDK6450_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				S3C2440_UFCON_TXTRIG16 |	\
+				S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+	[4] = {
+		.hwport		= 4,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#endif
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+	[5] = {
+		.hwport		= 5,
+		.flags		= 0,
+		.ucon		= SMDK6450_UCON_DEFAULT,
+		.ulcon		= SMDK6450_ULCON_DEFAULT,
+		.ufcon		= SMDK6450_UFCON_DEFAULT,
+	},
+#endif
+};
+
+static struct platform_device *smdk6450_devices[] __initdata = {
+	&s3c_device_adc,
+	&s3c_device_rtc,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_ts,
+	&s3c_device_wdt,
+	&s5p6450_device_iis0,
+	/* s5p6450_device_spi0 will be added */
+};
+
+static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6450_i2c0_cfg_gpio,
+};
+
+static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 1,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+	.cfg_gpio	= s5p6450_i2c1_cfg_gpio,
+};
+
+static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },	/* Samsung KS24C080C EEPROM */
+};
+
+static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+static void __init smdk6450_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P64X0_SYS_ID);
+	s3c24xx_init_clocks(19200000);
+	s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
+}
+
+static void __init smdk6450_machine_init(void)
+{
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
+	s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
+	i2c_register_board_info(0, smdk6450_i2c_devs0,
+			ARRAY_SIZE(smdk6450_i2c_devs0));
+	i2c_register_board_info(1, smdk6450_i2c_devs1,
+			ARRAY_SIZE(smdk6450_i2c_devs1));
+
+	platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
+}
+
+MACHINE_START(SMDK6450, "SMDK6450")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.boot_params	= S5P64X0_PA_SDRAM + 0x100,
+
+	.init_irq	= s5p6450_init_irq,
+	.map_io		= smdk6450_map_io,
+	.init_machine	= smdk6450_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
new file mode 100644
index 000000000000..46b463917c54
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64x0/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+
+#include <mach/i2c.h>
+
+void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5P6440_GPB(5), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
+
+void s5p6450_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5P6450_GPB(5), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
new file mode 100644
index 000000000000..6ad3b986021c
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * I2C1 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+
+#include <mach/i2c.h>
+
+void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5P6440_GPR(9), 2,
+			      S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
+}
+
+void s5p6450_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5P6450_GPR(9), 2,
+			      S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
+}
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index b2a11dfa3399..b8fbf2fcba6f 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -9,7 +9,6 @@ if ARCH_S5PC100
 
 config CPU_S5PC100
 	bool
-	select PLAT_S5P
 	select S5P_EXT_INT
 	select S3C_PL330_DMA
 	help
@@ -25,6 +24,16 @@ config S5PC100_SETUP_I2C1
 	help
 	  Common setup code for i2c bus 1.
 
+config S5PC100_SETUP_IDE
+	bool
+	help
+	  Common setup code for S5PC100 IDE GPIO configurations
+
+config S5PC100_SETUP_KEYPAD
+	bool
+	help
+	  Common setup code for KEYPAD GPIO configurations.
+
 config S5PC100_SETUP_SDHCI
 	bool
 	select S5PC100_SETUP_SDHCI_GPIO
@@ -40,13 +49,24 @@ config MACH_SMDKC100
 	bool "SMDKC100"
 	select CPU_S5PC100
 	select S3C_DEV_FB
-	select S3C_DEV_I2C1
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_IDE
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_TS
 	select S5PC100_SETUP_FB_24BPP
 	select S5PC100_SETUP_I2C1
+	select S5PC100_SETUP_IDE
+	select S5PC100_SETUP_KEYPAD
 	select S5PC100_SETUP_SDHCI
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
 	help
 	  Machine support for the Samsung SMDKC100
 
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index 543f3de5131e..eecab57d2e5d 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -11,7 +11,7 @@ obj-				:=
 
 # Core support for S5PC100 system
 
-obj-$(CONFIG_CPU_S5PC100)	+= cpu.o init.o clock.o gpiolib.o irq-gpio.o
+obj-$(CONFIG_CPU_S5PC100)	+= cpu.o init.o clock.o gpiolib.o
 obj-$(CONFIG_CPU_S5PC100)	+= setup-i2c0.o
 obj-$(CONFIG_CPU_S5PC100)	+= dma.o
 
@@ -19,6 +19,8 @@ obj-$(CONFIG_CPU_S5PC100)	+= dma.o
 
 obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
 obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5PC100_SETUP_IDE)		+= setup-ide.o
+obj-$(CONFIG_S5PC100_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S5PC100_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index e3fed4cfe7ad..2d4a761a5163 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -273,24 +273,6 @@ static struct clksrc_clk clk_div_hdmi = {
 	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
 };
 
-static int s5pc100_epll_enable(struct clk *clk, int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
-
-	if (enable)
-		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
-	else
-		__raw_writel(epll_con, S5P_EPLL_CON);
-
-	return 0;
-}
-
-static unsigned long s5pc100_epll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
 static u32 epll_div[][4] = {
 	{ 32750000,	131, 3, 4 },
 	{ 32768000,	131, 3, 4 },
@@ -341,13 +323,16 @@ static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
 
 	__raw_writel(epll_con, S5P_EPLL_CON);
 
+	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+			clk->rate, rate);
+
 	clk->rate = rate;
 
 	return 0;
 }
 
 static struct clk_ops s5pc100_epll_ops = {
-	.get_rate = s5pc100_epll_get_rate,
+	.get_rate = s5p_epll_get_rate,
 	.set_rate = s5pc100_epll_set_rate,
 };
 
@@ -691,55 +676,55 @@ static struct clk init_clocks_disable[] = {
 	}, {
 		.name		= "iis",
 		.id		= 0,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "iis",
 		.id		= 1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
 		.name		= "iis",
 		.id		= 2,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 2),
 	}, {
 		.name		= "ac97",
 		.id		= -1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "pcm",
 		.id		= 0,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 4),
 	}, {
 		.name		= "pcm",
 		.id		= 1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "spdif",
 		.id		= -1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "adc",
 		.id		= -1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
-		.name		= "keyif",
+		.name		= "keypad",
 		.id		= -1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 8),
 	}, {
@@ -848,6 +833,18 @@ struct clksrc_sources clk_src_group3 = {
 	.nr_sources	= ARRAY_SIZE(clk_src_group3_list),
 };
 
+static struct clksrc_clk clk_sclk_audio0 = {
+	.clk	= {
+		.name		= "sclk_audio",
+		.id		= 0,
+		.ctrlbit	= (1 << 8),
+		.enable		= s5pc100_sclk1_ctrl,
+	},
+	.sources = &clk_src_group3,
+	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
+	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+};
+
 static struct clk *clk_src_group4_list[] = {
 	[0] = &clk_mout_epll.clk,
 	[1] = &clk_div_mpll.clk,
@@ -862,6 +859,18 @@ struct clksrc_sources clk_src_group4 = {
 	.nr_sources	= ARRAY_SIZE(clk_src_group4_list),
 };
 
+static struct clksrc_clk clk_sclk_audio1 = {
+	.clk	= {
+		.name		= "sclk_audio",
+		.id		= 1,
+		.ctrlbit	= (1 << 9),
+		.enable		= s5pc100_sclk1_ctrl,
+	},
+	.sources = &clk_src_group4,
+	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
+	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+};
+
 static struct clk *clk_src_group5_list[] = {
 	[0] = &clk_mout_epll.clk,
 	[1] = &clk_div_mpll.clk,
@@ -875,6 +884,18 @@ struct clksrc_sources clk_src_group5 = {
 	.nr_sources	= ARRAY_SIZE(clk_src_group5_list),
 };
 
+static struct clksrc_clk clk_sclk_audio2 = {
+	.clk	= {
+		.name		= "sclk_audio",
+		.id		= 2,
+		.ctrlbit	= (1 << 10),
+		.enable		= s5pc100_sclk1_ctrl,
+	},
+	.sources = &clk_src_group5,
+	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
+	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+};
+
 static struct clk *clk_src_group6_list[] = {
 	[0] = &s5p_clk_27m,
 	[1] = &clk_vclk54m,
@@ -944,6 +965,64 @@ struct clksrc_sources clk_src_pwi = {
 	.nr_sources	= ARRAY_SIZE(clk_src_pwi_list),
 };
 
+static struct clk *clk_sclk_spdif_list[] = {
+	[0] = &clk_sclk_audio0.clk,
+	[1] = &clk_sclk_audio1.clk,
+	[2] = &clk_sclk_audio2.clk,
+};
+
+struct clksrc_sources clk_src_sclk_spdif = {
+	.sources	= clk_sclk_spdif_list,
+	.nr_sources	= ARRAY_SIZE(clk_sclk_spdif_list),
+};
+
+static int s5pc100_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *pclk;
+	int ret;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	ret = pclk->ops->set_rate(pclk, rate);
+	clk_put(pclk);
+
+	return ret;
+}
+
+static unsigned long s5pc100_spdif_get_rate(struct clk *clk)
+{
+	struct clk *pclk;
+	int rate;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	rate = pclk->ops->get_rate(clk);
+	clk_put(pclk);
+
+	return rate;
+}
+
+static struct clk_ops s5pc100_sclk_spdif_ops = {
+	.set_rate	= s5pc100_spdif_set_rate,
+	.get_rate	= s5pc100_spdif_get_rate,
+};
+
+static struct clksrc_clk clk_sclk_spdif = {
+	.clk	= {
+		.name		= "sclk_spdif",
+		.id		= -1,
+		.ctrlbit	= (1 << 11),
+		.enable		= s5pc100_sclk1_ctrl,
+		.ops		= &s5pc100_sclk_spdif_ops,
+	},
+	.sources = &clk_src_sclk_spdif,
+	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
+};
+
 static struct clksrc_clk clksrcs[] = {
 	{
 		.clk	= {
@@ -1001,39 +1080,6 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
 	}, {
 		.clk	= {
-			.name		= "sclk_audio",
-			.id		= 0,
-			.ctrlbit	= (1 << 8),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group3,
-		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_audio",
-			.id		= 1,
-			.ctrlbit	= (1 << 9),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group4,
-		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_audio",
-			.id		= 2,
-			.ctrlbit	= (1 << 10),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group5,
-		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
-	}, {
-		.clk	= {
 			.name		= "sclk_lcd",
 			.id		= -1,
 			.ctrlbit	= (1 << 0),
@@ -1078,7 +1124,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "mmc_bus",
+			.name		= "sclk_mmc",
 			.id		= 0,
 			.ctrlbit	= (1 << 12),
 			.enable		= s5pc100_sclk1_ctrl,
@@ -1089,7 +1135,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "mmc_bus",
+			.name		= "sclk_mmc",
 			.id		= 1,
 			.ctrlbit	= (1 << 13),
 			.enable		= s5pc100_sclk1_ctrl,
@@ -1100,7 +1146,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
 	}, {
 		.clk	= {
-			.name		= "mmc_bus",
+			.name		= "sclk_mmc",
 			.id		= 2,
 			.ctrlbit	= (1 << 14),
 			.enable		= s5pc100_sclk1_ctrl,
@@ -1179,6 +1225,10 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_div_pclkd1,
 	&clk_div_cam,
 	&clk_div_hdmi,
+	&clk_sclk_audio0,
+	&clk_sclk_audio1,
+	&clk_sclk_audio2,
+	&clk_sclk_spdif,
 };
 
 void __init_or_cpufreq s5pc100_setup_clocks(void)
@@ -1196,7 +1246,7 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
 	unsigned int ptr;
 
 	/* Set S5PC100 functions for clk_fout_epll */
-	clk_fout_epll.enable = s5pc100_epll_enable;
+	clk_fout_epll.enable = s5p_epll_enable;
 	clk_fout_epll.ops = &s5pc100_epll_ops;
 
 	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index 7b5bdbc9a5df..fd2708e7d8a9 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -1,5 +1,8 @@
 /* linux/arch/arm/mach-s5pc100/cpu.c
  *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
@@ -21,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -38,9 +42,12 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
+#include <plat/ata-core.h>
 #include <plat/iic-core.h>
 #include <plat/sdhci.h>
+#include <plat/adc-core.h>
 #include <plat/onenand-core.h>
+#include <plat/fb-core.h>
 
 #include <plat/s5pc100.h>
 
@@ -53,11 +60,31 @@ static struct map_desc s5pc100_iodesc[] __initdata = {
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5PC100_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5PC100_PA_VIC1),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)VA_VIC2,
-		.pfn		= __phys_to_pfn(S5P_PA_VIC2),
+		.pfn		= __phys_to_pfn(S5PC100_PA_VIC2),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5PC100_VA_OTHERS,
 		.pfn		= __phys_to_pfn(S5PC100_PA_OTHERS),
 		.length		= SZ_4K,
@@ -87,11 +114,15 @@ void __init s5pc100_map_io(void)
 	s5pc100_default_sdhci1();
 	s5pc100_default_sdhci2();
 
+	s3c_adc_setname("s3c64xx-adc");
+
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
 
 	s3c_onenand_setname("s5pc100-onenand");
+	s3c_fb_setname("s5pc100-fb");
+	s3c_cfcon_setname("s5pc100-pata");
 }
 
 void __init s5pc100_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pc100/dev-audio.c b/arch/arm/mach-s5pc100/dev-audio.c
index 18cfe9ae1936..564e195ec493 100644
--- a/arch/arm/mach-s5pc100/dev-audio.c
+++ b/arch/arm/mach-s5pc100/dev-audio.c
@@ -10,11 +10,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/audio.h>
 
-#include <mach/gpio.h>
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
@@ -24,19 +24,11 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev)
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
 	case 1:
-		s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
 		break;
 
 	case 2:
-		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
 		break;
 
 	case -1: /* Dedicated pins */
@@ -144,19 +136,11 @@ static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
 {
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5));
 		break;
 
 	case 1:
-		s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3));
 		break;
 
 	default:
@@ -231,13 +215,7 @@ struct platform_device s5pc100_device_pcm1 = {
 
 static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(4));
-
-	return 0;
+	return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4));
 }
 
 static struct resource s5pc100_ac97_resource[] = {
@@ -285,3 +263,57 @@ struct platform_device s5pc100_device_ac97 = {
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
+
+/* S/PDIF Controller platform_device */
+static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3));
+
+	return 0;
+}
+
+static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3));
+
+	return 0;
+}
+
+static struct resource s5pc100_spdif_resource[] = {
+	[0] = {
+		.start	= S5PC100_PA_SPDIF,
+		.end	= S5PC100_PA_SPDIF + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPDIF,
+		.end	= DMACH_SPDIF,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s5p_spdif_pdata = {
+	.cfg_gpio = s5pc100_spdif_cfg_gpd,
+};
+
+static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_spdif = {
+	.name		= "samsung-spdif",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5pc100_spdif_resource),
+	.resource	= s5pc100_spdif_resource,
+	.dev = {
+		.platform_data = &s5p_spdif_pdata,
+		.dma_mask = &s5pc100_spdif_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+void __init s5pc100_spdif_setup_gpio(int gpio)
+{
+	if (gpio == S5PC100_SPDIF_GPD)
+		s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd;
+	else
+		s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3;
+}
diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c
index 14618c346057..57b19794d9bb 100644
--- a/arch/arm/mach-s5pc100/dev-spi.c
+++ b/arch/arm/mach-s5pc100/dev-spi.c
@@ -10,10 +10,10 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
-#include <mach/gpio.h>
 #include <mach/spi-clocks.h>
 
 #include <plat/s3c64xx-spi.h>
@@ -38,30 +38,20 @@ static int s5pc100_spi_cfg_gpio(struct platform_device *pdev)
 {
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5PC100_GPB(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPB(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPB(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5PC100_GPB(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPB(1), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPB(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
+				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 		break;
 
 	case 1:
-		s3c_gpio_cfgpin(S5PC100_GPB(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPB(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPB(6), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5PC100_GPB(4), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPB(5), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPB(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
+				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 		break;
 
 	case 2:
 		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(3));
 		s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPG3(2), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPG3(3), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
+				      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
 		break;
 
 	default:
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index 0f5517571e2c..bf4cd0fb97c6 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -81,7 +81,7 @@ static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
 
 static struct platform_device s5pc100_device_pdma0 = {
 	.name		= "s3c-pl330",
-	.id		= 1,
+	.id		= 0,
 	.num_resources	= ARRAY_SIZE(s5pc100_pdma0_resource),
 	.resource	= s5pc100_pdma0_resource,
 	.dev		= {
@@ -143,7 +143,7 @@ static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
 
 static struct platform_device s5pc100_device_pdma1 = {
 	.name		= "s3c-pl330",
-	.id		= 2,
+	.id		= 1,
 	.num_resources	= ARRAY_SIZE(s5pc100_pdma1_resource),
 	.resource	= s5pc100_pdma1_resource,
 	.dev		= {
diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c
index 0fab7f2cd8bf..20856eb7dd51 100644
--- a/arch/arm/mach-s5pc100/gpiolib.c
+++ b/arch/arm/mach-s5pc100/gpiolib.c
@@ -1,5 +1,7 @@
-/*
- * arch/arm/plat-s5pc100/gpiolib.c
+/* linux/arch/arm/mach-s5pc100/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  *  Copyright 2009 Samsung Electronics Co
  *  Kyungmin Park <kyungmin.park@samsung.com>
@@ -61,30 +63,6 @@
  * L3	8	4Bit	None
  */
 
-static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
-	return S3C_IRQ_GPIO(chip->base + offset);
-}
-
-static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
-{
-	int base;
-
-	base = chip->base - S5PC100_GPH0(0);
-	if (base == 0)
-		return IRQ_EINT(offset);
-	base = chip->base - S5PC100_GPH1(0);
-	if (base == 0)
-		return IRQ_EINT(8 + offset);
-	base = chip->base - S5PC100_GPH2(0);
-	if (base == 0)
-		return IRQ_EINT(16 + offset);
-	base = chip->base - S5PC100_GPH3(0);
-	if (base == 0)
-		return IRQ_EINT(24 + offset);
-	return -EINVAL;
-}
-
 static struct s3c_gpio_cfg gpio_cfg = {
 	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
 	.set_pull	= s3c_gpio_setpull_updown,
@@ -104,209 +82,150 @@ static struct s3c_gpio_cfg gpio_cfg_noint = {
 	.get_pull	= s3c_gpio_getpull_updown,
 };
 
+/*
+ * GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PC100_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
+
+/*
+ * Following are the gpio banks in S5PC100.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
 static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 	{
-		.base	= S5PC100_GPA0_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPA0(0),
 			.ngpio	= S5PC100_GPIO_A0_NR,
 			.label	= "GPA0",
 		},
 	}, {
-		.base	= S5PC100_GPA1_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPA1(0),
 			.ngpio	= S5PC100_GPIO_A1_NR,
 			.label	= "GPA1",
 		},
 	}, {
-		.base	= S5PC100_GPB_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPB(0),
 			.ngpio	= S5PC100_GPIO_B_NR,
 			.label	= "GPB",
 		},
 	}, {
-		.base	= S5PC100_GPC_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPC(0),
 			.ngpio	= S5PC100_GPIO_C_NR,
 			.label	= "GPC",
 		},
 	}, {
-		.base	= S5PC100_GPD_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPD(0),
 			.ngpio	= S5PC100_GPIO_D_NR,
 			.label	= "GPD",
 		},
 	}, {
-		.base	= S5PC100_GPE0_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPE0(0),
 			.ngpio	= S5PC100_GPIO_E0_NR,
 			.label	= "GPE0",
 		},
 	}, {
-		.base	= S5PC100_GPE1_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPE1(0),
 			.ngpio	= S5PC100_GPIO_E1_NR,
 			.label	= "GPE1",
 		},
 	}, {
-		.base	= S5PC100_GPF0_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPF0(0),
 			.ngpio	= S5PC100_GPIO_F0_NR,
 			.label	= "GPF0",
 		},
 	}, {
-		.base	= S5PC100_GPF1_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPF1(0),
 			.ngpio	= S5PC100_GPIO_F1_NR,
 			.label	= "GPF1",
 		},
 	}, {
-		.base	= S5PC100_GPF2_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPF2(0),
 			.ngpio	= S5PC100_GPIO_F2_NR,
 			.label	= "GPF2",
 		},
 	}, {
-		.base	= S5PC100_GPF3_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPF3(0),
 			.ngpio	= S5PC100_GPIO_F3_NR,
 			.label	= "GPF3",
 		},
 	}, {
-		.base	= S5PC100_GPG0_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPG0(0),
 			.ngpio	= S5PC100_GPIO_G0_NR,
 			.label	= "GPG0",
 		},
 	}, {
-		.base	= S5PC100_GPG1_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPG1(0),
 			.ngpio	= S5PC100_GPIO_G1_NR,
 			.label	= "GPG1",
 		},
 	}, {
-		.base	= S5PC100_GPG2_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPG2(0),
 			.ngpio	= S5PC100_GPIO_G2_NR,
 			.label	= "GPG2",
 		},
 	}, {
-		.base	= S5PC100_GPG3_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPG3(0),
 			.ngpio	= S5PC100_GPIO_G3_NR,
 			.label	= "GPG3",
 		},
 	}, {
-		.base	= S5PC100_GPH0_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH0(0),
-			.ngpio	= S5PC100_GPIO_H0_NR,
-			.label	= "GPH0",
-		},
-	}, {
-		.base	= S5PC100_GPH1_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH1(0),
-			.ngpio	= S5PC100_GPIO_H1_NR,
-			.label	= "GPH1",
-		},
-	}, {
-		.base	= S5PC100_GPH2_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH2(0),
-			.ngpio	= S5PC100_GPIO_H2_NR,
-			.label	= "GPH2",
-		},
-	}, {
-		.base	= S5PC100_GPH3_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH3(0),
-			.ngpio	= S5PC100_GPIO_H3_NR,
-			.label	= "GPH3",
-		},
-	}, {
-		.base	= S5PC100_GPI_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPI(0),
 			.ngpio	= S5PC100_GPIO_I_NR,
 			.label	= "GPI",
 		},
 	}, {
-		.base	= S5PC100_GPJ0_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPJ0(0),
 			.ngpio	= S5PC100_GPIO_J0_NR,
 			.label	= "GPJ0",
 		},
 	}, {
-		.base	= S5PC100_GPJ1_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPJ1(0),
 			.ngpio	= S5PC100_GPIO_J1_NR,
 			.label	= "GPJ1",
 		},
 	}, {
-		.base	= S5PC100_GPJ2_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPJ2(0),
 			.ngpio	= S5PC100_GPIO_J2_NR,
 			.label	= "GPJ2",
 		},
 	}, {
-		.base	= S5PC100_GPJ3_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPJ3(0),
 			.ngpio	= S5PC100_GPIO_J3_NR,
 			.label	= "GPJ3",
 		},
 	}, {
-		.base	= S5PC100_GPJ4_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPJ4(0),
 			.ngpio	= S5PC100_GPIO_J4_NR,
 			.label	= "GPJ4",
 		},
 	}, {
-		.base	= S5PC100_GPK0_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPK0(0),
@@ -314,7 +233,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPK0",
 		},
 	}, {
-		.base	= S5PC100_GPK1_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPK1(0),
@@ -322,7 +240,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPK1",
 		},
 	}, {
-		.base	= S5PC100_GPK2_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPK2(0),
@@ -330,7 +247,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPK2",
 		},
 	}, {
-		.base	= S5PC100_GPK3_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPK3(0),
@@ -338,7 +254,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPK3",
 		},
 	}, {
-		.base	= S5PC100_GPL0_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPL0(0),
@@ -346,7 +261,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPL0",
 		},
 	}, {
-		.base	= S5PC100_GPL1_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPL1(0),
@@ -354,7 +268,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPL1",
 		},
 	}, {
-		.base	= S5PC100_GPL2_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPL2(0),
@@ -362,7 +275,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPL2",
 		},
 	}, {
-		.base	= S5PC100_GPL3_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPL3(0),
@@ -370,56 +282,72 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPL3",
 		},
 	}, {
-		.base	= S5PC100_GPL4_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPL4(0),
 			.ngpio	= S5PC100_GPIO_L4_NR,
 			.label	= "GPL4",
 		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
 	},
 };
 
-/* FIXME move from irq-gpio.c */
-extern struct irq_chip s5pc100_gpioint;
-extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
-
-static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
+static __init int s5pc100_gpiolib_init(void)
 {
-	/* Interrupt */
-	if (chip->config == &gpio_cfg) {
-		int i, irq;
-
-		chip->chip.to_irq = s5pc100_gpiolib_to_irq;
+	struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
+	int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+	int gpioint_group = 0;
+	int i;
 
-		for (i = 0;  i < chip->chip.ngpio; i++) {
-			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
-			set_irq_chip(irq, &s5pc100_gpioint);
-			set_irq_data(irq, &chip->chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL) {
+			chip->config = &gpio_cfg;
+			chip->group = gpioint_group++;
 		}
-	} else if (chip->config == &gpio_cfg_eint) {
-		chip->chip.to_irq = s5pc100_gpiolib_to_eint;
+		if (chip->base == NULL)
+			chip->base = S5PC100_BANK_BASE(i);
 	}
-}
-
-static __init int s5pc100_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip;
-	int nr_chips;
-
-	chip = s5pc100_gpio_chips;
-	nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
-
-	for (; nr_chips > 0; nr_chips--, chip++)
-		s5pc100_gpiolib_link(chip);
-
-	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips,
-				       ARRAY_SIZE(s5pc100_gpio_chips));
 
-	/* Interrupt */
-	set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler);
+	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 70e02e91ee3c..b2ba95ddf8e0 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,13 +22,12 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, rtmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index 71ae1f52df1d..29a8a12d9b4f 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -146,13 +146,6 @@ enum s5p_gpio_number {
 /* define the number of gpios we need to the one after the MP04() range */
 #define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
 
-#define EINT_MODE		S3C_GPIO_SFN(0x2)
-
-#define EINT_GPIO_0(x)		S5PC100_GPH0(x)
-#define EINT_GPIO_1(x)		S5PC100_GPH1(x)
-#define EINT_GPIO_2(x)		S5PC100_GPH2(x)
-#define EINT_GPIO_3(x)		S5PC100_GPH3(x)
-
 #include <asm-generic/gpio.h>
 
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 28aa551dc3a8..d2eb4757381f 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -29,7 +29,7 @@
 #define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
 
 /* VIC1: ARM, power, memory, connectivity */
-#define IRQ_CORTEX0		S5P_IRQ_VIC1(0)
+#define IRQ_PMU			S5P_IRQ_VIC1(0)
 #define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
 #define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
 #define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
@@ -38,7 +38,7 @@
 #define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
 #define IRQ_ONENAND		S5P_IRQ_VIC1(7)
 #define IRQ_NFC			S5P_IRQ_VIC1(8)
-#define IRQ_CFC			S5P_IRQ_VIC1(9)
+#define IRQ_CFCON		S5P_IRQ_VIC1(9)
 #define IRQ_UART0		S5P_IRQ_VIC1(10)
 #define IRQ_UART1		S5P_IRQ_VIC1(11)
 #define IRQ_UART2		S5P_IRQ_VIC1(12)
@@ -48,8 +48,8 @@
 #define IRQ_SPI1		S5P_IRQ_VIC1(16)
 #define IRQ_SPI2		S5P_IRQ_VIC1(17)
 #define IRQ_IRDA		S5P_IRQ_VIC1(18)
-#define IRQ_CAN0		S5P_IRQ_VIC1(19)
-#define IRQ_CAN1		S5P_IRQ_VIC1(20)
+#define IRQ_IIC2		S5P_IRQ_VIC1(19)
+#define IRQ_IIC3		S5P_IRQ_VIC1(20)
 #define IRQ_HSIRX		S5P_IRQ_VIC1(21)
 #define IRQ_HSITX		S5P_IRQ_VIC1(22)
 #define IRQ_UHOST		S5P_IRQ_VIC1(23)
@@ -100,11 +100,12 @@
 #define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
-#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
-#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
+/* GPIO interrupt */
+#define S5P_GPIOINT_BASE	(IRQ_EINT(31) + 1)
+#define S5P_GPIOINT_GROUP_MAXNR	21
 
-/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */
-#define NR_IRQS		(S3C_IRQ_GPIO(320) + 1)
+/* Set the default NR_IRQS */
+#define NR_IRQS			(IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
 
 /* Compatibility */
 #define IRQ_LCD_FIFO		IRQ_LCD0
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index cadae4305688..32e9cab5c864 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -44,23 +44,22 @@
 #define S5PC100_PA_OTHERS	(0xE0200000)
 #define S5PC100_VA_OTHERS	(S3C_VA_SYS + 0x10000)
 
-#define S5P_PA_GPIO		(0xE0300000)
+#define S5PC100_PA_GPIO		(0xE0300000)
 #define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
 
 /* Interrupt */
-#define S5PC100_PA_VIC		(0xE4000000)
+#define S5PC100_PA_VIC0		(0xE4000000)
+#define S5PC100_PA_VIC1		(0xE4100000)
+#define S5PC100_PA_VIC2		(0xE4200000)
 #define S5PC100_VA_VIC		S3C_VA_IRQ
-#define S5PC100_PA_VIC_OFFSET	0x100000
 #define S5PC100_VA_VIC_OFFSET	0x10000
-#define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
-#define S5P_PA_VIC0		S5PC1XX_PA_VIC(0)
-#define S5P_PA_VIC1		S5PC1XX_PA_VIC(1)
-#define S5P_PA_VIC2		S5PC1XX_PA_VIC(2)
 
 
 #define S5PC100_PA_ONENAND	(0xE7100000)
 
+#define S5PC100_PA_CFCON	(0xE7800000)
+
 /* DMA */
 #define S5PC100_PA_MDMA		(0xE8100000)
 #define S5PC100_PA_PDMA0	(0xE9000000)
@@ -72,6 +71,9 @@
 
 #define S5PC100_PA_SYSTIMER	(0xEA100000)
 
+#define S5PC100_PA_WATCHDOG	(0xEA200000)
+#define S5PC100_PA_RTC		(0xEA300000)
+
 #define S5PC100_PA_UART		(0xEC000000)
 
 #define S5P_PA_UART0		(S5PC100_PA_UART + 0x0)
@@ -94,6 +96,10 @@
 
 #define S5PC100_PA_FB		(0xEE000000)
 
+#define S5PC100_PA_FIMC0	(0xEE200000)
+#define S5PC100_PA_FIMC1	(0xEE300000)
+#define S5PC100_PA_FIMC2	(0xEE400000)
+
 #define S5PC100_PA_I2S0		(0xF2000000)
 #define S5PC100_PA_I2S1		(0xF2100000)
 #define S5PC100_PA_I2S2		(0xF2200000)
@@ -104,6 +110,10 @@
 #define S5PC100_PA_PCM0		0xF2400000
 #define S5PC100_PA_PCM1		0xF2500000
 
+#define S5PC100_PA_SPDIF	0xF2600000
+
+#define S5PC100_PA_TSADC	(0xF3000000)
+
 /* KEYPAD */
 #define S5PC100_PA_KEYPAD	(0xF3100000)
 
@@ -130,9 +140,19 @@
 #define S3C_PA_HSMMC1		S5PC100_PA_HSMMC(1)
 #define S3C_PA_HSMMC2		S5PC100_PA_HSMMC(2)
 #define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
+#define S3C_PA_WDT		S5PC100_PA_WATCHDOG
 #define S3C_PA_TSADC		S5PC100_PA_TSADC
 #define S3C_PA_ONENAND		S5PC100_PA_ONENAND
 #define S3C_PA_ONENAND_BUF	S5PC100_PA_ONENAND_BUF
 #define S3C_SZ_ONENAND_BUF	S5PC100_SZ_ONENAND_BUF
+#define S3C_PA_RTC		S5PC100_PA_RTC
+
+#define SAMSUNG_PA_ADC		S5PC100_PA_TSADC
+#define SAMSUNG_PA_CFCON	S5PC100_PA_CFCON
+#define SAMSUNG_PA_KEYPAD	S5PC100_PA_KEYPAD
+
+#define S5P_PA_FIMC0		S5PC100_PA_FIMC0
+#define S5P_PA_FIMC1		S5PC100_PA_FIMC1
+#define S5P_PA_FIMC2		S5PC100_PA_FIMC2
 
 #endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-clock.h b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
index 5d27d286d504..bc92da2e0ba2 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-clock.h
@@ -71,7 +71,10 @@
 #define S5P_CLKDIV1_PCLKD1_SHIFT	(16)
 
 #define S5PC100_SWRESET		S5PC100_REG_OTHERS(0x000)
+#define S5PC100_MEM_SYS_CFG	S5PC100_REG_OTHERS(0x200)
 
 #define S5PC100_SWRESET_RESETVAL	0xc100
 
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON	0x30
+
 #endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
index 1732cd28c765..4be4cc9abf75 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
@@ -100,40 +100,6 @@
 #define BLENDCON					(0x260)
 #define BLENDCON_8BIT_ALPHA				(1 << 0)
 
-/* Per-window palette base addresses (start of palette memory).
- * Each window palette area consists of 256 32-bit entries.
- * START is the first address (entry 0th), END is the address of 255th entry.
- */
-#define WIN0_PAL_BASE					(0x2400)
-#define WIN0_PAL_END					(0x27fc)
-#define WIN1_PAL_BASE					(0x2800)
-#define WIN1_PAL_END					(0x2bfc)
-#define WIN2_PAL_BASE					(0x2c00)
-#define WIN2_PAL_END					(0x2ffc)
-#define WIN3_PAL_BASE					(0x3000)
-#define WIN3_PAL_END					(0x33fc)
-#define WIN4_PAL_BASE					(0x3400)
-#define WIN4_PAL_END					(0x37fc)
-
-#define WIN0_PAL(_entry)			(WIN0_PAL_BASE + ((_entry) * 4))
-#define WIN1_PAL(_entry)			(WIN1_PAL_BASE + ((_entry) * 4))
-#define WIN2_PAL(_entry)			(WIN2_PAL_BASE + ((_entry) * 4))
-#define WIN3_PAL(_entry)			(WIN3_PAL_BASE + ((_entry) * 4))
-#define WIN4_PAL(_entry)			(WIN4_PAL_BASE + ((_entry) * 4))
-
-static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
-{
-	switch (window) {
-	case 0: return WIN0_PAL(reg);
-	case 1: return WIN1_PAL(reg);
-	case 2: return WIN2_PAL(reg);
-	case 3: return WIN3_PAL(reg);
-	case 4: return WIN4_PAL(reg);
-	}
-
-	BUG();
-}
-
 
 #endif /* __ASM_ARCH_REGS_FB_H */
 
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
index dd6295e1251d..0bf73209ec7b 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
@@ -11,43 +11,6 @@
 
 #include <mach/map.h>
 
-/* S5PC100 */
-#define S5PC100_GPIO_BASE	S5P_VA_GPIO
-#define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
-#define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
-#define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
-#define S5PC100_GPC_BASE	(S5PC100_GPIO_BASE + 0x0060)
-#define S5PC100_GPD_BASE	(S5PC100_GPIO_BASE + 0x0080)
-#define S5PC100_GPE0_BASE	(S5PC100_GPIO_BASE + 0x00A0)
-#define S5PC100_GPE1_BASE	(S5PC100_GPIO_BASE + 0x00C0)
-#define S5PC100_GPF0_BASE	(S5PC100_GPIO_BASE + 0x00E0)
-#define S5PC100_GPF1_BASE	(S5PC100_GPIO_BASE + 0x0100)
-#define S5PC100_GPF2_BASE	(S5PC100_GPIO_BASE + 0x0120)
-#define S5PC100_GPF3_BASE	(S5PC100_GPIO_BASE + 0x0140)
-#define S5PC100_GPG0_BASE	(S5PC100_GPIO_BASE + 0x0160)
-#define S5PC100_GPG1_BASE	(S5PC100_GPIO_BASE + 0x0180)
-#define S5PC100_GPG2_BASE	(S5PC100_GPIO_BASE + 0x01A0)
-#define S5PC100_GPG3_BASE	(S5PC100_GPIO_BASE + 0x01C0)
-#define S5PC100_GPH0_BASE	(S5PC100_GPIO_BASE + 0x0C00)
-#define S5PC100_GPH1_BASE	(S5PC100_GPIO_BASE + 0x0C20)
-#define S5PC100_GPH2_BASE	(S5PC100_GPIO_BASE + 0x0C40)
-#define S5PC100_GPH3_BASE	(S5PC100_GPIO_BASE + 0x0C60)
-#define S5PC100_GPI_BASE	(S5PC100_GPIO_BASE + 0x01E0)
-#define S5PC100_GPJ0_BASE	(S5PC100_GPIO_BASE + 0x0200)
-#define S5PC100_GPJ1_BASE	(S5PC100_GPIO_BASE + 0x0220)
-#define S5PC100_GPJ2_BASE	(S5PC100_GPIO_BASE + 0x0240)
-#define S5PC100_GPJ3_BASE	(S5PC100_GPIO_BASE + 0x0260)
-#define S5PC100_GPJ4_BASE	(S5PC100_GPIO_BASE + 0x0280)
-#define S5PC100_GPK0_BASE	(S5PC100_GPIO_BASE + 0x02A0)
-#define S5PC100_GPK1_BASE	(S5PC100_GPIO_BASE + 0x02C0)
-#define S5PC100_GPK2_BASE	(S5PC100_GPIO_BASE + 0x02E0)
-#define S5PC100_GPK3_BASE	(S5PC100_GPIO_BASE + 0x0300)
-#define S5PC100_GPL0_BASE	(S5PC100_GPIO_BASE + 0x0320)
-#define S5PC100_GPL1_BASE	(S5PC100_GPIO_BASE + 0x0340)
-#define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
-#define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
-#define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
-
 #define S5PC100EINT30CON		(S5P_VA_GPIO + 0xE00)
 #define S5P_EINT_CON(x)			(S5PC100EINT30CON + ((x) * 0x4))
 
@@ -64,12 +27,12 @@
 
 #define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
 
-/* values for S5P_EXTINT0 */
-#define S5P_EXTINT_LOWLEV		(0x00)
-#define S5P_EXTINT_HILEV		(0x01)
-#define S5P_EXTINT_FALLEDGE		(0x02)
-#define S5P_EXTINT_RISEEDGE		(0x03)
-#define S5P_EXTINT_BOTHEDGE		(0x04)
+#define EINT_MODE		S3C_GPIO_SFN(0x2)
+
+#define EINT_GPIO_0(x)		S5PC100_GPH0(x)
+#define EINT_GPIO_1(x)		S5PC100_GPH1(x)
+#define EINT_GPIO_2(x)		S5PC100_GPH2(x)
+#define EINT_GPIO_3(x)		S5PC100_GPH3(x)
 
 #endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
 
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index 681f626a9ae1..a9ea57c06600 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,18 +11,11 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <linux/io.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
+#include <plat/system-reset.h>
 
 static void arch_idle(void)
 {
 	/* nothing here yet */
 }
 
-static void arch_reset(char mode, const char *cmd)
-{
-	__raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET);
-	return;
-}
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
index be9df79903ed..44c8e5726d9d 100644
--- a/arch/arm/mach-s5pc100/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
@@ -12,6 +12,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xe0000000UL)
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pc100/irq-gpio.c b/arch/arm/mach-s5pc100/irq-gpio.c
deleted file mode 100644
index 2bf86c18bc73..000000000000
--- a/arch/arm/mach-s5pc100/irq-gpio.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * arch/arm/mach-s5pc100/irq-gpio.c
- *
- * Copyright (C) 2009 Samsung Electronics
- *
- * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/gpio-cfg.h>
-
-#define S5P_GPIOREG(x)		(S5P_VA_GPIO + (x))
-
-#define CON_OFFSET			0x700
-#define MASK_OFFSET			0x900
-#define PEND_OFFSET			0xA00
-#define CON_OFFSET_2			0xE00
-#define MASK_OFFSET_2			0xF00
-#define PEND_OFFSET_2			0xF40
-
-#define GPIOINT_LEVEL_LOW		0x0
-#define GPIOINT_LEVEL_HIGH		0x1
-#define GPIOINT_EDGE_FALLING		0x2
-#define GPIOINT_EDGE_RISING		0x3
-#define GPIOINT_EDGE_BOTH		0x4
-
-static int group_to_con_offset(int group)
-{
-	return group << 2;
-}
-
-static int group_to_mask_offset(int group)
-{
-	return group << 2;
-}
-
-static int group_to_pend_offset(int group)
-{
-	return group << 2;
-}
-
-static int s5pc100_get_start(unsigned int group)
-{
-	switch (group) {
-	case 0: return S5PC100_GPIO_A0_START;
-	case 1: return S5PC100_GPIO_A1_START;
-	case 2: return S5PC100_GPIO_B_START;
-	case 3: return S5PC100_GPIO_C_START;
-	case 4: return S5PC100_GPIO_D_START;
-	case 5: return S5PC100_GPIO_E0_START;
-	case 6: return S5PC100_GPIO_E1_START;
-	case 7: return S5PC100_GPIO_F0_START;
-	case 8: return S5PC100_GPIO_F1_START;
-	case 9: return S5PC100_GPIO_F2_START;
-	case 10: return S5PC100_GPIO_F3_START;
-	case 11: return S5PC100_GPIO_G0_START;
-	case 12: return S5PC100_GPIO_G1_START;
-	case 13: return S5PC100_GPIO_G2_START;
-	case 14: return S5PC100_GPIO_G3_START;
-	case 15: return S5PC100_GPIO_I_START;
-	case 16: return S5PC100_GPIO_J0_START;
-	case 17: return S5PC100_GPIO_J1_START;
-	case 18: return S5PC100_GPIO_J2_START;
-	case 19: return S5PC100_GPIO_J3_START;
-	case 20: return S5PC100_GPIO_J4_START;
-	default:
-		BUG();
-	}
-
-	return -EINVAL;
-}
-
-static int s5pc100_get_group(unsigned int irq)
-{
-	irq -= S3C_IRQ_GPIO(0);
-
-	switch (irq) {
-	case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
-		return 0;
-	case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
-		return 1;
-	case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
-		return 2;
-	case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
-		return 3;
-	case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
-		return 4;
-	case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
-		return 5;
-	case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
-		return 6;
-	case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
-		return 7;
-	case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
-		return 8;
-	case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
-		return 9;
-	case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
-		return 10;
-	case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
-		return 11;
-	case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
-		return 12;
-	case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
-		return 13;
-	case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
-		return 14;
-	case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
-		return 15;
-	case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
-		return 16;
-	case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
-		return 17;
-	case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
-		return 18;
-	case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
-		return 19;
-	case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
-		return 20;
-	default:
-		BUG();
-	}
-
-	return -EINVAL;
-}
-
-static int s5pc100_get_offset(unsigned int irq)
-{
-	struct gpio_chip *chip = get_irq_data(irq);
-	return irq - S3C_IRQ_GPIO(chip->base);
-}
-
-static void s5pc100_gpioint_ack(unsigned int irq)
-{
-	int group, offset, pend_offset;
-	unsigned int value;
-
-	group = s5pc100_get_group(irq);
-	offset = s5pc100_get_offset(irq);
-	pend_offset = group_to_pend_offset(group);
-
-	value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
-	value |= 1 << offset;
-	__raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset);
-}
-
-static void s5pc100_gpioint_mask(unsigned int irq)
-{
-	int group, offset, mask_offset;
-	unsigned int value;
-
-	group = s5pc100_get_group(irq);
-	offset = s5pc100_get_offset(irq);
-	mask_offset = group_to_mask_offset(group);
-
-	value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-	value |= 1 << offset;
-	__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc100_gpioint_unmask(unsigned int irq)
-{
-	int group, offset, mask_offset;
-	unsigned int value;
-
-	group = s5pc100_get_group(irq);
-	offset = s5pc100_get_offset(irq);
-	mask_offset = group_to_mask_offset(group);
-
-	value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-	value &= ~(1 << offset);
-	__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc100_gpioint_mask_ack(unsigned int irq)
-{
-	s5pc100_gpioint_mask(irq);
-	s5pc100_gpioint_ack(irq);
-}
-
-static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type)
-{
-	int group, offset, con_offset;
-	unsigned int value;
-
-	group = s5pc100_get_group(irq);
-	offset = s5pc100_get_offset(irq);
-	con_offset = group_to_con_offset(group);
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No irq type\n");
-		return -EINVAL;
-	case IRQ_TYPE_EDGE_RISING:
-		type = GPIOINT_EDGE_RISING;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		type = GPIOINT_EDGE_FALLING;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		type = GPIOINT_EDGE_BOTH;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		type = GPIOINT_LEVEL_HIGH;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		type = GPIOINT_LEVEL_LOW;
-		break;
-	default:
-		BUG();
-	}
-
-
-	value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset);
-	value &= ~(0xf << (offset * 0x4));
-	value |= (type << (offset * 0x4));
-	__raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset);
-
-	return 0;
-}
-
-struct irq_chip s5pc100_gpioint = {
-	.name		= "GPIO",
-	.ack		= s5pc100_gpioint_ack,
-	.mask		= s5pc100_gpioint_mask,
-	.mask_ack	= s5pc100_gpioint_mask_ack,
-	.unmask		= s5pc100_gpioint_unmask,
-	.set_type	= s5pc100_gpioint_set_type,
-};
-
-void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int group, offset, pend_offset, mask_offset;
-	int real_irq, group_end;
-	unsigned int pend, mask;
-
-	group_end = 21;
-
-	for (group = 0; group < group_end; group++) {
-		pend_offset = group_to_pend_offset(group);
-		pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
-		if (!pend)
-			continue;
-
-		mask_offset = group_to_mask_offset(group);
-		mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-		pend &= ~mask;
-
-		for (offset = 0; offset < 8; offset++) {
-			if (pend & (1 << offset)) {
-				real_irq = s5pc100_get_start(group) + offset;
-				generic_handle_irq(S3C_IRQ_GPIO(real_irq));
-			}
-		}
-	}
-}
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index af22f8202a07..18b405d514d6 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -22,6 +22,7 @@
 #include <linux/i2c.h>
 #include <linux/fb.h>
 #include <linux/delay.h>
+#include <linux/input.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,18 +43,23 @@
 #include <plat/s5pc100.h>
 #include <plat/fb.h>
 #include <plat/iic.h>
+#include <plat/ata.h>
+#include <plat/adc.h>
+#include <plat/keypad.h>
+#include <plat/ts.h>
+#include <plat/audio.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define SMDKC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5PC100_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define SMDKC100_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PC100_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+#define SMDKC100_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
 				 S3C2440_UFCON_RXTRIG8 |	\
 				 S3C2440_UFCON_TXTRIG16)
 
@@ -61,30 +67,30 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.ucon	     = S5PC100_UCON_DEFAULT,
-		.ulcon	     = S5PC100_ULCON_DEFAULT,
-		.ufcon	     = S5PC100_UFCON_DEFAULT,
+		.ucon	     = SMDKC100_UCON_DEFAULT,
+		.ulcon	     = SMDKC100_ULCON_DEFAULT,
+		.ufcon	     = SMDKC100_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
-		.ucon	     = S5PC100_UCON_DEFAULT,
-		.ulcon	     = S5PC100_ULCON_DEFAULT,
-		.ufcon	     = S5PC100_UFCON_DEFAULT,
+		.ucon	     = SMDKC100_UCON_DEFAULT,
+		.ulcon	     = SMDKC100_ULCON_DEFAULT,
+		.ufcon	     = SMDKC100_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport	     = 2,
 		.flags	     = 0,
-		.ucon	     = S5PC100_UCON_DEFAULT,
-		.ulcon	     = S5PC100_ULCON_DEFAULT,
-		.ufcon	     = S5PC100_UFCON_DEFAULT,
+		.ucon	     = SMDKC100_UCON_DEFAULT,
+		.ulcon	     = SMDKC100_ULCON_DEFAULT,
+		.ufcon	     = SMDKC100_UFCON_DEFAULT,
 	},
 	[3] = {
 		.hwport	     = 3,
 		.flags	     = 0,
-		.ucon	     = S5PC100_UCON_DEFAULT,
-		.ulcon	     = S5PC100_ULCON_DEFAULT,
-		.ufcon	     = S5PC100_UFCON_DEFAULT,
+		.ucon	     = SMDKC100_UCON_DEFAULT,
+		.ulcon	     = SMDKC100_ULCON_DEFAULT,
+		.ufcon	     = SMDKC100_UFCON_DEFAULT,
 	},
 };
 
@@ -128,7 +134,6 @@ static struct platform_device smdkc100_lcd_powerdev = {
 static struct s3c_fb_pd_win smdkc100_fb_win0 = {
 	/* this is to ensure we use win0 */
 	.win_mode	= {
-		.pixclock = 1000000000000ULL / ((8+13+3+800)*(7+5+1+480)*80),
 		.left_margin	= 8,
 		.right_margin	= 13,
 		.upper_margin	= 7,
@@ -137,6 +142,7 @@ static struct s3c_fb_pd_win smdkc100_fb_win0 = {
 		.vsync_len	= 1,
 		.xres		= 800,
 		.yres		= 480,
+		.refresh	= 80,
 	},
 	.max_bpp	= 32,
 	.default_bpp	= 16,
@@ -149,16 +155,55 @@ static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
 	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
 };
 
+static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = {
+	.setup_gpio	= s5pc100_ide_setup_gpio,
+};
+
+static uint32_t smdkc100_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdkc100_keymap_data __initdata = {
+	.keymap		= smdkc100_keymap,
+	.keymap_size	= ARRAY_SIZE(smdkc100_keymap),
+};
+
+static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = {
+	.keymap_data	= &smdkc100_keymap_data,
+	.rows		= 2,
+	.cols		= 8,
+};
+
 static struct platform_device *smdkc100_devices[] __initdata = {
+	&s3c_device_adc,
+	&s3c_device_cfcon,
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_fb,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
+	&s3c_device_ts,
+	&s3c_device_wdt,
 	&smdkc100_lcd_powerdev,
 	&s5pc100_device_iis0,
+	&samsung_device_keypad,
 	&s5pc100_device_ac97,
+	&s3c_device_rtc,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5pc100_device_spdif,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
 };
 
 static void __init smdkc100_map_io(void)
@@ -170,6 +215,8 @@ static void __init smdkc100_map_io(void)
 
 static void __init smdkc100_machine_init(void)
 {
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
 	/* I2C */
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
@@ -177,6 +224,11 @@ static void __init smdkc100_machine_init(void)
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
 	s3c_fb_set_platdata(&smdkc100_lcd_pdata);
+	s3c_ide_set_platdata(&smdkc100_ide_pdata);
+
+	samsung_keypad_set_platdata(&smdkc100_keypad_data);
+
+	s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
 
 	/* LCD init */
 	gpio_request(S5PC100_GPD(0), "GPD");
@@ -187,8 +239,6 @@ static void __init smdkc100_machine_init(void)
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pc100_init_irq,
 	.map_io		= smdkc100_map_io,
diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
index 6eba6cb8e2f4..d31c0f3fe222 100644
--- a/arch/arm/mach-s5pc100/setup-fb-24bpp.c
+++ b/arch/arm/mach-s5pc100/setup-fb-24bpp.c
@@ -22,27 +22,15 @@
 
 #define DISR_OFFSET	0x7008
 
-void s5pc100_fb_gpio_setup_24bpp(void)
+static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr)
 {
-	unsigned int gpio = 0;
-
-	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
+}
 
-	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+	s5pc100_fb_setgpios(S5PC100_GPF0(0), 8);
+	s5pc100_fb_setgpios(S5PC100_GPF1(0), 8);
+	s5pc100_fb_setgpios(S5PC100_GPF2(0), 8);
+	s5pc100_fb_setgpios(S5PC100_GPF3(0), 4);
 }
diff --git a/arch/arm/mach-s5pc100/setup-i2c0.c b/arch/arm/mach-s5pc100/setup-i2c0.c
index dd3174e6ecc5..eaef7a3bda49 100644
--- a/arch/arm/mach-s5pc100/setup-i2c0.c
+++ b/arch/arm/mach-s5pc100/setup-i2c0.c
@@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5PC100_GPD(3), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/mach-s5pc100/setup-i2c1.c b/arch/arm/mach-s5pc100/setup-i2c1.c
index d1fec26b69ee..aaff74a90dee 100644
--- a/arch/arm/mach-s5pc100/setup-i2c1.c
+++ b/arch/arm/mach-s5pc100/setup-i2c1.c
@@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5PC100_GPD(5), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/mach-s5pc100/setup-ide.c b/arch/arm/mach-s5pc100/setup-ide.c
new file mode 100644
index 000000000000..223aae044466
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-ide.c
@@ -0,0 +1,57 @@
+/* linux/arch/arm/mach-s5pc100/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PC100 setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr)
+{
+	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
+
+	for (; nr > 0; nr--, base++)
+		s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
+}
+
+void s5pc100_ide_setup_gpio(void)
+{
+	u32 reg;
+
+	/* Independent CF interface, CF chip select configuration */
+	reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
+	writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
+
+	/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
+	s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8);
+
+	/*CF_Data[0 - 7] */
+	s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8);
+
+	/* CF_Data[8 - 15] */
+	s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8);
+
+	/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
+	s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4);
+
+	/* EBI_OE, EBI_WE */
+	s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0));
+
+	/* CF_OE, CF_WE */
+	s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2));
+
+	/* CF_CD */
+	s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE);
+}
diff --git a/arch/arm/mach-s5pc100/setup-keypad.c b/arch/arm/mach-s5pc100/setup-keypad.c
new file mode 100644
index 000000000000..ada377f0c206
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-keypad.c
@@ -0,0 +1,23 @@
+/* linux/arch/arm/mach-s5pc100/setup-keypad.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * GPIO configuration for S5PC100 KeyPad device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+	/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
+	s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3));
+
+	/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
+	s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
index 7769c760c9ef..03c02d04c68c 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
@@ -20,11 +20,11 @@
 
 #include <plat/gpio-cfg.h>
 #include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
 
 void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 {
-	unsigned int gpio;
-	unsigned int end;
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 	unsigned int num;
 
 	num = width;
@@ -32,55 +32,40 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 	if (width == 8)
 		num = width - 2;
 
-	end = S5PC100_GPG0(2 + num);
-
 	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
-	for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2));
 
-	if (width == 8) {
-		for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		}
-	}
+	if (width == 8)
+		s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2));
 
-	s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+	}
 }
 
 void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 {
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S5PC100_GPG2(2 + width);
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 
 	/* Set all the necessary GPG2 pins to special-function 2 */
-	for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2));
 
-	s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+	}
 }
 
 void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
 {
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S5PC100_GPG3(2 + width);
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 
 	/* Set all the necessary GPG3 pins to special-function 2 */
-	for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2));
 
-	s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+	}
 }
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index ea7ff19adb95..f16946e456e9 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -26,10 +26,10 @@
 /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
 
 char *s5pc100_hsmmc_clksrcs[4] = {
-	[0] = "hsmmc",
-	[1] = "hsmmc",
-	/* [2] = "mmc_bus", not yet successfully used yet */
-	/* [3] = "48m", - note not successfully used yet */
+	[0] = "hsmmc",		/* HCLK */
+	/* [1] = "hsmmc",	- duplicate HCLK entry */
+	[2] = "sclk_mmc",	/* mmc_bus */
+	/* [3] = "48m",		- note not successfully used yet */
 };
 
 
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 0761eac9aaea..862f239a0fdb 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -11,9 +11,9 @@ if ARCH_S5PV210
 
 config CPU_S5PV210
 	bool
-	select PLAT_S5P
 	select S3C_PL330_DMA
 	select S5P_EXT_INT
+	select S5PV210_PM if PM
 	help
 	  Enable S5PV210 CPU support
 
@@ -27,11 +27,21 @@ config S5PV210_SETUP_I2C2
 	help
 	  Common setup code for i2c bus 2.
 
+config S5PV210_SETUP_IDE
+	bool
+	help
+	  Common setup code for S5PV210 IDE GPIO configurations
+
 config S5PV210_SETUP_FB_24BPP
 	bool
 	help
           Common setup code for S5PV210 with an 24bpp RGB display helper.
 
+config S5PV210_SETUP_KEYPAD
+	bool
+	help
+	  Common setup code for keypad.
+
 config S5PV210_SETUP_SDHCI
         bool
         select S5PV210_SETUP_SDHCI_GPIO
@@ -43,49 +53,114 @@ config S5PV210_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for SDHCI gpio.
 
-# machine support
+menu "S5PC110 Machines"
 
 config MACH_AQUILA
-	bool "Samsung Aquila"
+	bool "Aquila"
 	select CPU_S5PV210
-	select ARCH_SPARSEMEM_ENABLE
-	select S5PV210_SETUP_FB_24BPP
 	select S3C_DEV_FB
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S5P_DEV_ONENAND
+	select S5PV210_SETUP_FB_24BPP
+	select S5PV210_SETUP_SDHCI
 	help
 	  Machine support for the Samsung Aquila target based on S5PC110 SoC
 
 config MACH_GONI
 	bool "GONI"
 	select CPU_S5PV210
-	select ARCH_SPARSEMEM_ENABLE
+	select S5P_GPIO_INT
+	select S3C_DEV_FB
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C2
+	select S3C_DEV_USB_HSOTG
+	select S5P_DEV_ONENAND
+	select SAMSUNG_DEV_KEYPAD
+	select S5PV210_SETUP_FB_24BPP
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_KEYPAD
+	select S5PV210_SETUP_SDHCI
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210
 
-config S5PC110_DEV_ONENAND
-	bool
+config MACH_SMDKC110
+	bool "SMDKC110"
+	select CPU_S5PV210
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C2
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_IDE
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_IDE
 	help
-	  Compile in platform device definition for OneNAND1 controller
+	  Machine support for Samsung SMDKC110
+	  S5PC110(MCP) is one of package option of S5PV210
+
+endmenu
+
+menu "S5PV210 Machines"
 
 config MACH_SMDKV210
 	bool "SMDKV210"
 	select CPU_S5PV210
-	select ARCH_SPARSEMEM_ENABLE
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C2
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
 	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_IDE
+	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_TS
-	select S3C_DEV_WDT
-	select HAVE_S3C2410_WATCHDOG
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_IDE
+	select S5PV210_SETUP_KEYPAD
+	select S5PV210_SETUP_SDHCI
 	help
 	  Machine support for Samsung SMDKV210
 
-config MACH_SMDKC110
-	bool "SMDKC110"
+config MACH_TORBRECK
+	bool "Torbreck"
 	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C2
+	select S3C_DEV_RTC
 	select S3C_DEV_WDT
-	select HAVE_S3C2410_WATCHDOG
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_SDHCI
 	help
-	  Machine support for Samsung SMDKC110
-	  S5PC110(MCP) is one of package option of S5PV210
+	  Machine support for aESOP Torbreck
+
+endmenu
+
+config S5PV210_PM
+	bool
+	help
+	  Power Management code common to S5PV210
 
 endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 30be9a6a4620..ff1a0db57a2f 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -14,6 +14,8 @@ obj-				:=
 
 obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o gpiolib.o
 obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
+obj-$(CONFIG_S5PV210_PM)	+= pm.o sleep.o
+obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
 
 # machine support
 
@@ -21,15 +23,17 @@ obj-$(CONFIG_MACH_AQUILA)	+= mach-aquila.o
 obj-$(CONFIG_MACH_SMDKV210)	+= mach-smdkv210.o
 obj-$(CONFIG_MACH_SMDKC110)	+= mach-smdkc110.o
 obj-$(CONFIG_MACH_GONI)		+= mach-goni.o
+obj-$(CONFIG_MACH_TORBRECK)	+= mach-torbreck.o
 
 # device support
 
 obj-y				+= dev-audio.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
-obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o
 
 obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
 obj-$(CONFIG_S5PV210_SETUP_I2C1) 	+= setup-i2c1.o
 obj-$(CONFIG_S5PV210_SETUP_I2C2) 	+= setup-i2c2.o
+obj-$(CONFIG_S5PV210_SETUP_IDE)		+= setup-ide.o
+obj-$(CONFIG_S5PV210_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI)       += setup-sdhci.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index af91fefef2c6..019c3a69b0e4 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -31,6 +31,8 @@
 #include <plat/clock-clksrc.h>
 #include <plat/s5pv210.h>
 
+static unsigned long xtal;
+
 static struct clksrc_clk clk_mout_apll = {
 	.clk	= {
 		.name		= "mout_apll",
@@ -173,11 +175,6 @@ static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable)
 	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
 }
 
-static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable);
-}
-
 static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
@@ -264,6 +261,36 @@ static struct clksrc_clk clk_sclk_vpll = {
 	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
 };
 
+static struct clk *clkset_moutdmc0src_list[] = {
+	[0] = &clk_sclk_a2m.clk,
+	[1] = &clk_mout_mpll.clk,
+	[2] = NULL,
+	[3] = NULL,
+};
+
+static struct clksrc_sources clkset_moutdmc0src = {
+	.sources	= clkset_moutdmc0src_list,
+	.nr_sources	= ARRAY_SIZE(clkset_moutdmc0src_list),
+};
+
+static struct clksrc_clk clk_mout_dmc0 = {
+	.clk	= {
+		.name		= "mout_dmc0",
+		.id		= -1,
+	},
+	.sources	= &clkset_moutdmc0src,
+	.reg_src	= { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 },
+};
+
+static struct clksrc_clk clk_sclk_dmc0 = {
+	.clk	= {
+		.name		= "sclk_dmc0",
+		.id		= -1,
+		.parent		= &clk_mout_dmc0.clk,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 },
+};
+
 static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk)
 {
 	return clk_get_rate(clk->parent) / 2;
@@ -273,14 +300,53 @@ static struct clk_ops clk_hclk_imem_ops = {
 	.get_rate	= s5pv210_clk_imem_get_rate,
 };
 
+static unsigned long s5pv210_clk_fout_apll_get_rate(struct clk *clk)
+{
+	return s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+}
+
+static struct clk_ops clk_fout_apll_ops = {
+	.get_rate	= s5pv210_clk_fout_apll_get_rate,
+};
+
 static struct clk init_clocks_disable[] = {
 	{
+		.name		= "pdma",
+		.id		= 0,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "pdma",
+		.id		= 1,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
 		.name		= "rot",
 		.id		= -1,
 		.parent		= &clk_hclk_dsys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1<<29),
 	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 24),
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 26),
+	}, {
 		.name		= "otg",
 		.id		= -1,
 		.parent		= &clk_hclk_psys.clk,
@@ -357,7 +423,7 @@ static struct clk init_clocks_disable[] = {
 		.id		= 1,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<8),
+		.ctrlbit	= (1 << 10),
 	}, {
 		.name		= "i2c",
 		.id		= 2,
@@ -418,6 +484,12 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 0),
 	},
 };
 
@@ -647,6 +719,53 @@ static struct clksrc_sources clkset_sclk_spdif = {
 	.nr_sources	= ARRAY_SIZE(clkset_sclk_spdif_list),
 };
 
+static int s5pv210_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *pclk;
+	int ret;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	ret = pclk->ops->set_rate(pclk, rate);
+	clk_put(pclk);
+
+	return ret;
+}
+
+static unsigned long s5pv210_spdif_get_rate(struct clk *clk)
+{
+	struct clk *pclk;
+	int rate;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	rate = pclk->ops->get_rate(clk);
+	clk_put(pclk);
+
+	return rate;
+}
+
+static struct clk_ops s5pv210_sclk_spdif_ops = {
+	.set_rate	= s5pv210_spdif_set_rate,
+	.get_rate	= s5pv210_spdif_get_rate,
+};
+
+static struct clksrc_clk clk_sclk_spdif = {
+	.clk		= {
+		.name		= "sclk_spdif",
+		.id		= -1,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 27),
+		.ops		= &s5pv210_sclk_spdif_ops,
+	},
+	.sources = &clkset_sclk_spdif,
+	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
+};
+
 static struct clk *clkset_group2_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_xusbxti,
@@ -731,15 +850,6 @@ static struct clksrc_clk clksrcs[] = {
 		.sources = &clkset_sclk_mixer,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
 	}, {
-		.clk		= {
-			.name		= "sclk_spdif",
-			.id		= -1,
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 27),
-		},
-		.sources = &clkset_sclk_spdif,
-		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
-	}, {
 		.clk	= {
 			.name		= "sclk_fimc",
 			.id		= 0,
@@ -940,12 +1050,93 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_sclk_dac,
 	&clk_sclk_pixel,
 	&clk_sclk_hdmi,
+	&clk_mout_dmc0,
+	&clk_sclk_dmc0,
+	&clk_sclk_audio0,
+	&clk_sclk_audio1,
+	&clk_sclk_audio2,
+	&clk_sclk_spdif,
+};
+
+static u32 epll_div[][6] = {
+	{  48000000, 0, 48, 3, 3, 0 },
+	{  96000000, 0, 48, 3, 2, 0 },
+	{ 144000000, 1, 72, 3, 2, 0 },
+	{ 192000000, 0, 48, 3, 1, 0 },
+	{ 288000000, 1, 72, 3, 1, 0 },
+	{  32750000, 1, 65, 3, 4, 35127 },
+	{  32768000, 1, 65, 3, 4, 35127 },
+	{  45158400, 0, 45, 3, 3, 10355 },
+	{  45000000, 0, 45, 3, 3, 10355 },
+	{  45158000, 0, 45, 3, 3, 10355 },
+	{  49125000, 0, 49, 3, 3, 9961 },
+	{  49152000, 0, 49, 3, 3, 9961 },
+	{  67737600, 1, 67, 3, 3, 48366 },
+	{  67738000, 1, 67, 3, 3, 48366 },
+	{  73800000, 1, 73, 3, 3, 47710 },
+	{  73728000, 1, 73, 3, 3, 47710 },
+	{  36000000, 1, 32, 3, 4, 0 },
+	{  60000000, 1, 60, 3, 3, 0 },
+	{  72000000, 1, 72, 3, 3, 0 },
+	{  80000000, 1, 80, 3, 3, 0 },
+	{  84000000, 0, 42, 3, 2, 0 },
+	{  50000000, 0, 50, 3, 3, 0 },
+};
+
+static int s5pv210_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	epll_con = __raw_readl(S5P_EPLL_CON);
+	epll_con_k = __raw_readl(S5P_EPLL_CON1);
+
+	epll_con_k &= ~PLL46XX_KDIV_MASK;
+	epll_con &= ~(1 << 27 |
+			PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |
+			PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |
+			PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		if (epll_div[i][0] == rate) {
+			epll_con_k |= epll_div[i][5] << 0;
+			epll_con |= (epll_div[i][1] << 27 |
+					epll_div[i][2] << PLL46XX_MDIV_SHIFT |
+					epll_div[i][3] << PLL46XX_PDIV_SHIFT |
+					epll_div[i][4] << PLL46XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P_EPLL_CON);
+	__raw_writel(epll_con_k, S5P_EPLL_CON1);
+
+	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+			clk->rate, rate);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5pv210_epll_ops = {
+	.set_rate = s5pv210_epll_set_rate,
+	.get_rate = s5p_epll_get_rate,
 };
 
 void __init_or_cpufreq s5pv210_setup_clocks(void)
 {
 	struct clk *xtal_clk;
-	unsigned long xtal;
 	unsigned long vpllsrc;
 	unsigned long armclk;
 	unsigned long hclk_msys;
@@ -961,6 +1152,10 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
 	unsigned int ptr;
 	u32 clkdiv0, clkdiv1;
 
+	/* Set functions for clk_fout_epll */
+	clk_fout_epll.enable = s5p_epll_enable;
+	clk_fout_epll.ops = &s5pv210_epll_ops;
+
 	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
 
 	clkdiv0 = __raw_readl(S5P_CLK_DIV0);
@@ -979,11 +1174,12 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
 
 	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
 	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
-	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+	epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON),
+				__raw_readl(S5P_EPLL_CON1), pll_4600);
 	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
 	vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502);
 
-	clk_fout_apll.rate = apll;
+	clk_fout_apll.ops = &clk_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
 	clk_fout_vpll.rate = vpll;
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 411a4a9cbfc7..8eb480e201b0 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-s5pv210/cpu.c
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ *		http://www.samsung.com
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -31,9 +32,15 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
+#include <plat/fb-core.h>
 #include <plat/s5pv210.h>
+#include <plat/adc-core.h>
+#include <plat/ata-core.h>
+#include <plat/fimc-core.h>
 #include <plat/iic-core.h>
+#include <plat/keypad-core.h>
 #include <plat/sdhci.h>
+#include <plat/reset.h>
 
 /* Initial IO mappings */
 
@@ -41,7 +48,22 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
 		.pfn		= __phys_to_pfn(S5PV210_PA_SYSTIMER),
-		.length		= SZ_1M,
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PV210_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC0,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC0),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC1,
+		.pfn		= __phys_to_pfn(S5PV210_PA_VIC1),
+		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)VA_VIC2,
@@ -54,10 +76,30 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5P_VA_SROMC,
 		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_DMC0,
+		.pfn		= __phys_to_pfn(S5PV210_PA_DMC0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_DMC1,
+		.pfn		= __phys_to_pfn(S5PV210_PA_DMC1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		=__phys_to_pfn(S5PV210_PA_HSPHY),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	}
 };
 
@@ -69,6 +111,11 @@ static void s5pv210_idle(void)
 	local_irq_enable();
 }
 
+static void s5pv210_sw_reset(void)
+{
+	__raw_writel(0x1, S5P_SWRESET);
+}
+
 /* s5pv210_map_io
  *
  * register the standard cpu IO areas
@@ -76,21 +123,31 @@ static void s5pv210_idle(void)
 
 void __init s5pv210_map_io(void)
 {
-#ifdef CONFIG_S3C_DEV_ADC
-	s3c_device_adc.name	= "s3c64xx-adc";
-#endif
-
 	iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
 
 	/* initialise device information early */
 	s5pv210_default_sdhci0();
 	s5pv210_default_sdhci1();
 	s5pv210_default_sdhci2();
+	s5pv210_default_sdhci3();
+
+	s3c_adc_setname("s3c64xx-adc");
+
+	s3c_cfcon_setname("s5pv210-pata");
+
+	s3c_fimc_setname(0, "s5pv210-fimc");
+	s3c_fimc_setname(1, "s5pv210-fimc");
+	s3c_fimc_setname(2, "s5pv210-fimc");
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
 	s3c_i2c2_setname("s3c2440-i2c");
+
+	s3c_fb_setname("s5pv210-fb");
+
+	/* Use s5pv210-keypad instead of samsung-keypad */
+	samsung_keypad_setname("s5pv210-keypad");
 }
 
 void __init s5pv210_init_clocks(int xtal)
@@ -138,5 +195,8 @@ int __init s5pv210_init(void)
 	/* set idle function */
 	pm_idle = s5pv210_idle;
 
+	/* set sw_reset function */
+	s5p_reset_hook = s5pv210_sw_reset;
+
 	return sysdev_register(&s5pv210_sysdev);
 }
diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c
new file mode 100644
index 000000000000..a6f22920a2c2
--- /dev/null
+++ b/arch/arm/mach-s5pv210/cpufreq.c
@@ -0,0 +1,484 @@
+/* linux/arch/arm/mach-s5pv210/cpufreq.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * CPU frequency scaling for S5PC110/S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+static struct clk *cpu_clk;
+static struct clk *dmc0_clk;
+static struct clk *dmc1_clk;
+static struct cpufreq_freqs freqs;
+
+/* APLL M,P,S values for 1G/800Mhz */
+#define APLL_VAL_1000	((1 << 31) | (125 << 16) | (3 << 8) | 1)
+#define APLL_VAL_800	((1 << 31) | (100 << 16) | (3 << 8) | 1)
+
+/*
+ * DRAM configurations to calculate refresh counter for changing
+ * frequency of memory.
+ */
+struct dram_conf {
+	unsigned long freq;	/* HZ */
+	unsigned long refresh;	/* DRAM refresh counter * 1000 */
+};
+
+/* DRAM configuration (DMC0 and DMC1) */
+static struct dram_conf s5pv210_dram_conf[2];
+
+enum perf_level {
+	L0, L1, L2, L3, L4,
+};
+
+enum s5pv210_mem_type {
+	LPDDR	= 0x1,
+	LPDDR2	= 0x2,
+	DDR2	= 0x4,
+};
+
+enum s5pv210_dmc_port {
+	DMC0 = 0,
+	DMC1,
+};
+
+static struct cpufreq_frequency_table s5pv210_freq_table[] = {
+	{L0, 1000*1000},
+	{L1, 800*1000},
+	{L2, 400*1000},
+	{L3, 200*1000},
+	{L4, 100*1000},
+	{0, CPUFREQ_TABLE_END},
+};
+
+static u32 clkdiv_val[5][11] = {
+	/*
+	 * Clock divider value for following
+	 * { APLL, A2M, HCLK_MSYS, PCLK_MSYS,
+	 *   HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS,
+	 *   ONEDRAM, MFC, G3D }
+	 */
+
+	/* L0 : [1000/200/100][166/83][133/66][200/200] */
+	{0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L1 : [800/200/100][166/83][133/66][200/200] */
+	{0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L2 : [400/200/100][166/83][133/66][200/200] */
+	{1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L3 : [200/200/100][166/83][133/66][200/200] */
+	{3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L4 : [100/100/100][83/83][66/66][100/100] */
+	{7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0},
+};
+
+/*
+ * This function set DRAM refresh counter
+ * accoriding to operating frequency of DRAM
+ * ch: DMC port number 0 or 1
+ * freq: Operating frequency of DRAM(KHz)
+ */
+static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
+{
+	unsigned long tmp, tmp1;
+	void __iomem *reg = NULL;
+
+	if (ch == DMC0)
+		reg = (S5P_VA_DMC0 + 0x30);
+	else if (ch == DMC1)
+		reg = (S5P_VA_DMC1 + 0x30);
+	else
+		printk(KERN_ERR "Cannot find DMC port\n");
+
+	/* Find current DRAM frequency */
+	tmp = s5pv210_dram_conf[ch].freq;
+
+	do_div(tmp, freq);
+
+	tmp1 = s5pv210_dram_conf[ch].refresh;
+
+	do_div(tmp1, tmp);
+
+	__raw_writel(tmp1, reg);
+}
+
+int s5pv210_verify_speed(struct cpufreq_policy *policy)
+{
+	if (policy->cpu)
+		return -EINVAL;
+
+	return cpufreq_frequency_table_verify(policy, s5pv210_freq_table);
+}
+
+unsigned int s5pv210_getspeed(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+
+	return clk_get_rate(cpu_clk) / 1000;
+}
+
+static int s5pv210_target(struct cpufreq_policy *policy,
+			  unsigned int target_freq,
+			  unsigned int relation)
+{
+	unsigned long reg;
+	unsigned int index, priv_index;
+	unsigned int pll_changing = 0;
+	unsigned int bus_speed_changing = 0;
+
+	freqs.old = s5pv210_getspeed(0);
+
+	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
+					   target_freq, relation, &index))
+		return -EINVAL;
+
+	freqs.new = s5pv210_freq_table[index].frequency;
+	freqs.cpu = 0;
+
+	if (freqs.new == freqs.old)
+		return 0;
+
+	/* Finding current running level index */
+	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
+					   freqs.old, relation, &priv_index))
+		return -EINVAL;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	if (freqs.new > freqs.old) {
+		/* Voltage up: will be implemented */
+	}
+
+	/* Check if there need to change PLL */
+	if ((index == L0) || (priv_index == L0))
+		pll_changing = 1;
+
+	/* Check if there need to change System bus clock */
+	if ((index == L4) || (priv_index == L4))
+		bus_speed_changing = 1;
+
+	if (bus_speed_changing) {
+		/*
+		 * Reconfigure DRAM refresh counter value for minimum
+		 * temporary clock while changing divider.
+		 * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287
+		 */
+		if (pll_changing)
+			s5pv210_set_refresh(DMC1, 83000);
+		else
+			s5pv210_set_refresh(DMC1, 100000);
+
+		s5pv210_set_refresh(DMC0, 83000);
+	}
+
+	/*
+	 * APLL should be changed in this level
+	 * APLL -> MPLL(for stable transition) -> APLL
+	 * Some clock source's clock API are not prepared.
+	 * Do not use clock API in below code.
+	 */
+	if (pll_changing) {
+		/*
+		 * 1. Temporary Change divider for MFC and G3D
+		 * SCLKA2M(200/1=200)->(200/4=50)Mhz
+		 */
+		reg = __raw_readl(S5P_CLK_DIV2);
+		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+		reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
+			(3 << S5P_CLKDIV2_MFC_SHIFT);
+		__raw_writel(reg, S5P_CLK_DIV2);
+
+		/* For MFC, G3D dividing */
+		do {
+			reg = __raw_readl(S5P_CLKDIV_STAT0);
+		} while (reg & ((1 << 16) | (1 << 17)));
+
+		/*
+		 * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
+		 * (200/4=50)->(667/4=166)Mhz
+		 */
+		reg = __raw_readl(S5P_CLK_SRC2);
+		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+		reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
+			(1 << S5P_CLKSRC2_MFC_SHIFT);
+		__raw_writel(reg, S5P_CLK_SRC2);
+
+		do {
+			reg = __raw_readl(S5P_CLKMUX_STAT1);
+		} while (reg & ((1 << 7) | (1 << 3)));
+
+		/*
+		 * 3. DMC1 refresh count for 133Mhz if (index == L4) is
+		 * true refresh counter is already programed in upper
+		 * code. 0x287@83Mhz
+		 */
+		if (!bus_speed_changing)
+			s5pv210_set_refresh(DMC1, 133000);
+
+		/* 4. SCLKAPLL -> SCLKMPLL */
+		reg = __raw_readl(S5P_CLK_SRC0);
+		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+		reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
+		__raw_writel(reg, S5P_CLK_SRC0);
+
+		do {
+			reg = __raw_readl(S5P_CLKMUX_STAT0);
+		} while (reg & (0x1 << 18));
+
+	}
+
+	/* Change divider */
+	reg = __raw_readl(S5P_CLK_DIV0);
+
+	reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
+		S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
+		S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK |
+		S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK);
+
+	reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) |
+		(clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) |
+		(clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) |
+		(clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) |
+		(clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) |
+		(clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) |
+		(clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
+		(clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
+
+	__raw_writel(reg, S5P_CLK_DIV0);
+
+	do {
+		reg = __raw_readl(S5P_CLKDIV_STAT0);
+	} while (reg & 0xff);
+
+	/* ARM MCS value changed */
+	reg = __raw_readl(S5P_ARM_MCS_CON);
+	reg &= ~0x3;
+	if (index >= L3)
+		reg |= 0x3;
+	else
+		reg |= 0x1;
+
+	__raw_writel(reg, S5P_ARM_MCS_CON);
+
+	if (pll_changing) {
+		/* 5. Set Lock time = 30us*24Mhz = 0x2cf */
+		__raw_writel(0x2cf, S5P_APLL_LOCK);
+
+		/*
+		 * 6. Turn on APLL
+		 * 6-1. Set PMS values
+		 * 6-2. Wait untile the PLL is locked
+		 */
+		if (index == L0)
+			__raw_writel(APLL_VAL_1000, S5P_APLL_CON);
+		else
+			__raw_writel(APLL_VAL_800, S5P_APLL_CON);
+
+		do {
+			reg = __raw_readl(S5P_APLL_CON);
+		} while (!(reg & (0x1 << 29)));
+
+		/*
+		 * 7. Change souce clock from SCLKMPLL(667Mhz)
+		 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
+		 * (667/4=166)->(200/4=50)Mhz
+		 */
+		reg = __raw_readl(S5P_CLK_SRC2);
+		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+		reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
+			(0 << S5P_CLKSRC2_MFC_SHIFT);
+		__raw_writel(reg, S5P_CLK_SRC2);
+
+		do {
+			reg = __raw_readl(S5P_CLKMUX_STAT1);
+		} while (reg & ((1 << 7) | (1 << 3)));
+
+		/*
+		 * 8. Change divider for MFC and G3D
+		 * (200/4=50)->(200/1=200)Mhz
+		 */
+		reg = __raw_readl(S5P_CLK_DIV2);
+		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+		reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
+			(clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
+		__raw_writel(reg, S5P_CLK_DIV2);
+
+		/* For MFC, G3D dividing */
+		do {
+			reg = __raw_readl(S5P_CLKDIV_STAT0);
+		} while (reg & ((1 << 16) | (1 << 17)));
+
+		/* 9. Change MPLL to APLL in MSYS_MUX */
+		reg = __raw_readl(S5P_CLK_SRC0);
+		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+		reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
+		__raw_writel(reg, S5P_CLK_SRC0);
+
+		do {
+			reg = __raw_readl(S5P_CLKMUX_STAT0);
+		} while (reg & (0x1 << 18));
+
+		/*
+		 * 10. DMC1 refresh counter
+		 * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c
+		 * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618
+		 */
+		if (!bus_speed_changing)
+			s5pv210_set_refresh(DMC1, 200000);
+	}
+
+	/*
+	 * L4 level need to change memory bus speed, hence onedram clock divier
+	 * and memory refresh parameter should be changed
+	 */
+	if (bus_speed_changing) {
+		reg = __raw_readl(S5P_CLK_DIV6);
+		reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
+		reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
+		__raw_writel(reg, S5P_CLK_DIV6);
+
+		do {
+			reg = __raw_readl(S5P_CLKDIV_STAT1);
+		} while (reg & (1 << 15));
+
+		/* Reconfigure DRAM refresh counter value */
+		if (index != L4) {
+			/*
+			 * DMC0 : 166Mhz
+			 * DMC1 : 200Mhz
+			 */
+			s5pv210_set_refresh(DMC0, 166000);
+			s5pv210_set_refresh(DMC1, 200000);
+		} else {
+			/*
+			 * DMC0 : 83Mhz
+			 * DMC1 : 100Mhz
+			 */
+			s5pv210_set_refresh(DMC0, 83000);
+			s5pv210_set_refresh(DMC1, 100000);
+		}
+	}
+
+	if (freqs.new < freqs.old) {
+		/* Voltage down: will be implemented */
+	}
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	printk(KERN_DEBUG "Perf changed[L%d]\n", index);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy,
+				   pm_message_t pmsg)
+{
+	return 0;
+}
+
+static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	return 0;
+}
+#endif
+
+static int check_mem_type(void __iomem *dmc_reg)
+{
+	unsigned long val;
+
+	val = __raw_readl(dmc_reg + 0x4);
+	val = (val & (0xf << 8));
+
+	return val >> 8;
+}
+
+static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned long mem_type;
+
+	cpu_clk = clk_get(NULL, "armclk");
+	if (IS_ERR(cpu_clk))
+		return PTR_ERR(cpu_clk);
+
+	dmc0_clk = clk_get(NULL, "sclk_dmc0");
+	if (IS_ERR(dmc0_clk)) {
+		clk_put(cpu_clk);
+		return PTR_ERR(dmc0_clk);
+	}
+
+	dmc1_clk = clk_get(NULL, "hclk_msys");
+	if (IS_ERR(dmc1_clk)) {
+		clk_put(dmc0_clk);
+		clk_put(cpu_clk);
+		return PTR_ERR(dmc1_clk);
+	}
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	/*
+	 * check_mem_type : This driver only support LPDDR & LPDDR2.
+	 * other memory type is not supported.
+	 */
+	mem_type = check_mem_type(S5P_VA_DMC0);
+
+	if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
+		printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
+		return -EINVAL;
+	}
+
+	/* Find current refresh counter and frequency each DMC */
+	s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000);
+	s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
+
+	s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000);
+	s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
+
+	policy->cur = policy->min = policy->max = s5pv210_getspeed(0);
+
+	cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu);
+
+	policy->cpuinfo.transition_latency = 40000;
+
+	return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table);
+}
+
+static struct cpufreq_driver s5pv210_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= s5pv210_verify_speed,
+	.target		= s5pv210_target,
+	.get		= s5pv210_getspeed,
+	.init		= s5pv210_cpu_init,
+	.name		= "s5pv210",
+#ifdef CONFIG_PM
+	.suspend	= s5pv210_cpufreq_suspend,
+	.resume		= s5pv210_cpufreq_resume,
+#endif
+};
+
+static int __init s5pv210_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&s5pv210_driver);
+}
+
+late_initcall(s5pv210_cpufreq_init);
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index 6e215330a1be..1303fcb12b51 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -10,11 +10,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/audio.h>
 
-#include <mach/gpio.h>
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
@@ -24,29 +24,15 @@ static int s5pv210_cfg_i2s(struct platform_device *pdev)
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
 	case 1:
-		s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2));
 		break;
 
 	case 2:
-		s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4));
 		break;
 
 	case -1:
-		s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
 		break;
 
 	default:
@@ -151,25 +137,13 @@ static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev)
 {
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin_range(S5PV210_GPI(0), 5, S3C_GPIO_SFN(3));
 		break;
 	case 1:
-		s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(3));
 		break;
 	case 2:
-		s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(2));
 		break;
 	default:
 		printk(KERN_DEBUG "Invalid PCM Controller number!");
@@ -271,13 +245,7 @@ struct platform_device s5pv210_device_pcm2 = {
 
 static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(4));
-
-	return 0;
+	return s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(4));
 }
 
 static struct resource s5pv210_ac97_resource[] = {
@@ -325,3 +293,43 @@ struct platform_device s5pv210_device_ac97 = {
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
+
+/* S/PDIF Controller platform_device */
+
+static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 2, S3C_GPIO_SFN(3));
+
+	return 0;
+}
+
+static struct resource s5pv210_spdif_resource[] = {
+	[0] = {
+		.start	= S5PV210_PA_SPDIF,
+		.end	= S5PV210_PA_SPDIF + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPDIF,
+		.end	= DMACH_SPDIF,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata samsung_spdif_pdata = {
+	.cfg_gpio = s5pv210_spdif_cfg_gpio,
+};
+
+static u64 s5pv210_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv210_device_spdif = {
+	.name		= "samsung-spdif",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5pv210_spdif_resource),
+	.resource	= s5pv210_spdif_resource,
+	.dev = {
+		.platform_data = &samsung_spdif_pdata,
+		.dma_mask = &s5pv210_spdif_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
diff --git a/arch/arm/mach-s5pv210/dev-onenand.c b/arch/arm/mach-s5pv210/dev-onenand.c
deleted file mode 100644
index 34997b752f93..000000000000
--- a/arch/arm/mach-s5pv210/dev-onenand.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/arm/mach-s5pv210/dev-onenand.c
- *
- *  Copyright (c) 2008-2010 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S5PC110 series device definition for OneNAND devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-static struct resource s5pc110_onenand_resources[] = {
-	[0] = {
-		.start	= S5PC110_PA_ONENAND,
-		.end	= S5PC110_PA_ONENAND + SZ_128K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S5PC110_PA_ONENAND_DMA,
-		.end	= S5PC110_PA_ONENAND_DMA + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s5pc110_device_onenand = {
-	.name		= "s5pc110-onenand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s5pc110_onenand_resources),
-	.resource	= s5pc110_onenand_resources,
-};
-
-void s5pc110_onenand_set_platdata(struct onenand_platform_data *pdata)
-{
-	struct onenand_platform_data *pd;
-
-	pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
-	if (!pd)
-		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
-	s5pc110_device_onenand.dev.platform_data = pd;
-}
diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c
index 337a62b57a0b..e3249a47e3b1 100644
--- a/arch/arm/mach-s5pv210/dev-spi.c
+++ b/arch/arm/mach-s5pv210/dev-spi.c
@@ -10,11 +10,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 
 #include <mach/dma.h>
 #include <mach/map.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/spi-clocks.h>
 
 #include <plat/s3c64xx-spi.h>
@@ -35,23 +35,15 @@ static char *spi_src_clks[] = {
  */
 static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPB(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PV210_GPB(2), S3C_GPIO_PULL_UP);
+		base = S5PV210_GPB(0);
 		break;
 
 	case 1:
-		s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPB(6), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PV210_GPB(6), S3C_GPIO_PULL_UP);
+		base = S5PV210_GPB(4);
 		break;
 
 	default:
@@ -59,6 +51,9 @@ static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgall_range(base, 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 778ad5fe231a..497d3439a142 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -82,7 +82,7 @@ static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
 
 static struct platform_device s5pv210_device_pdma0 = {
 	.name		= "s3c-pl330",
-	.id		= 1,
+	.id		= 0,
 	.num_resources	= ARRAY_SIZE(s5pv210_pdma0_resource),
 	.resource	= s5pv210_pdma0_resource,
 	.dev		= {
@@ -144,7 +144,7 @@ static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
 
 static struct platform_device s5pv210_device_pdma1 = {
 	.name		= "s3c-pl330",
-	.id		= 2,
+	.id		= 1,
 	.num_resources	= ARRAY_SIZE(s5pv210_pdma1_resource),
 	.resource	= s5pv210_pdma1_resource,
 	.dev		= {
diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c
index 9ea8972e023d..ab673effd767 100644
--- a/arch/arm/mach-s5pv210/gpiolib.c
+++ b/arch/arm/mach-s5pv210/gpiolib.c
@@ -150,6 +150,7 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
 			.label	= "GPG3",
 		},
 	}, {
+		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PV210_GPI(0),
 			.ngpio	= S5PV210_GPIO_I_NR,
@@ -207,36 +208,58 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
 			.label	= "MP03",
 		},
 	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP04(0),
+			.ngpio	= S5PV210_GPIO_MP04_NR,
+			.label	= "MP04",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP05(0),
+			.ngpio	= S5PV210_GPIO_MP05_NR,
+			.label	= "MP05",
+		},
+	}, {
 		.base	= (S5P_VA_GPIO + 0xC00),
 		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(0),
 		.chip	= {
 			.base	= S5PV210_GPH0(0),
 			.ngpio	= S5PV210_GPIO_H0_NR,
 			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
 		},
 	}, {
 		.base	= (S5P_VA_GPIO + 0xC20),
 		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(8),
 		.chip	= {
 			.base	= S5PV210_GPH1(0),
 			.ngpio	= S5PV210_GPIO_H1_NR,
 			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
 		},
 	}, {
 		.base	= (S5P_VA_GPIO + 0xC40),
 		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(16),
 		.chip	= {
 			.base	= S5PV210_GPH2(0),
 			.ngpio	= S5PV210_GPIO_H2_NR,
 			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
 		},
 	}, {
 		.base	= (S5P_VA_GPIO + 0xC60),
 		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(24),
 		.chip	= {
 			.base	= S5PV210_GPH3(0),
 			.ngpio	= S5PV210_GPIO_H3_NR,
 			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
 		},
 	},
 };
@@ -245,11 +268,14 @@ static __init int s5pv210_gpiolib_init(void)
 {
 	struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
 	int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
+	int gpioint_group = 0;
 	int i = 0;
 
 	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL)
+		if (chip->config == NULL) {
 			chip->config = &gpio_cfg;
+			chip->group = gpioint_group++;
+		}
 		if (chip->base == NULL)
 			chip->base = S5PV210_BANK_BASE(i);
 	}
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 7872f5c3dfc2..169fe654a59e 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -21,13 +21,12 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1
-		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = S3C_VA_UART
+	.macro addruart, rp, rv
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
-		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
 #endif
 	.endm
 
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
index d6461ba2b71d..1f4b595534c2 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -52,6 +52,8 @@
 #define S5PV210_GPIO_MP01_NR	(8)
 #define S5PV210_GPIO_MP02_NR	(4)
 #define S5PV210_GPIO_MP03_NR	(8)
+#define S5PV210_GPIO_MP04_NR	(8)
+#define S5PV210_GPIO_MP05_NR	(8)
 
 /* GPIO bank numbers */
 
@@ -94,6 +96,8 @@ enum s5p_gpio_number {
 	S5PV210_GPIO_MP01_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
 	S5PV210_GPIO_MP02_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
 	S5PV210_GPIO_MP03_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
+	S5PV210_GPIO_MP04_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03),
+	S5PV210_GPIO_MP05_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04),
 };
 
 /* S5PV210 GPIO number definitions */
@@ -127,13 +131,15 @@ enum s5p_gpio_number {
 #define S5PV210_MP01(_nr)	(S5PV210_GPIO_MP01_START + (_nr))
 #define S5PV210_MP02(_nr)	(S5PV210_GPIO_MP02_START + (_nr))
 #define S5PV210_MP03(_nr)	(S5PV210_GPIO_MP03_START + (_nr))
+#define S5PV210_MP04(_nr)	(S5PV210_GPIO_MP04_START + (_nr))
+#define S5PV210_MP05(_nr)	(S5PV210_GPIO_MP05_START + (_nr))
 
 /* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END	(S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
+#define S5PV210_GPIO_END	(S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1)
 #define S3C_GPIO_END		S5PV210_GPIO_END
 
-/* define the number of gpios we need to the one after the MP03() range */
-#define ARCH_NR_GPIOS		(S5PV210_MP03(S5PV210_GPIO_MP03_NR) +	\
+/* define the number of gpios we need to the one after the MP05() range */
+#define ARCH_NR_GPIOS		(S5PV210_MP05(S5PV210_GPIO_MP05_NR) +	\
 				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
 
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 96895378ea27..119b95fdc3ce 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -36,7 +36,7 @@
 
 /* VIC1: ARM, Power, Memory, Connectivity, Storage */
 
-#define IRQ_CORTEX0		S5P_IRQ_VIC1(0)
+#define IRQ_PMU			S5P_IRQ_VIC1(0)
 #define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
 #define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
 #define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
@@ -45,7 +45,7 @@
 #define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
 #define IRQ_ONENAND		S5P_IRQ_VIC1(7)
 #define IRQ_NFC			S5P_IRQ_VIC1(8)
-#define IRQ_CFC			S5P_IRQ_VIC1(9)
+#define IRQ_CFCON		S5P_IRQ_VIC1(9)
 #define IRQ_UART0		S5P_IRQ_VIC1(10)
 #define IRQ_UART1		S5P_IRQ_VIC1(11)
 #define IRQ_UART2		S5P_IRQ_VIC1(12)
@@ -55,8 +55,8 @@
 #define IRQ_SPI1		S5P_IRQ_VIC1(16)
 #define IRQ_SPI2		S5P_IRQ_VIC1(17)
 #define IRQ_IRDA		S5P_IRQ_VIC1(18)
-#define IRQ_CAN0		S5P_IRQ_VIC1(19)
-#define IRQ_CAN1		S5P_IRQ_VIC1(20)
+#define IRQ_IIC2		S5P_IRQ_VIC1(19)
+#define IRQ_IIC3		S5P_IRQ_VIC1(20)
 #define IRQ_HSIRX		S5P_IRQ_VIC1(21)
 #define IRQ_HSITX		S5P_IRQ_VIC1(22)
 #define IRQ_UHOST		S5P_IRQ_VIC1(23)
@@ -109,7 +109,7 @@
 
 #define IRQ_IPC			S5P_IRQ_VIC3(0)
 #define IRQ_HOSTIF		S5P_IRQ_VIC3(1)
-#define IRQ_MMC3		S5P_IRQ_VIC3(2)
+#define IRQ_HSMMC3		S5P_IRQ_VIC3(2)
 #define IRQ_CEC			S5P_IRQ_VIC3(3)
 #define IRQ_TSI			S5P_IRQ_VIC3(4)
 #define IRQ_MDNIE0		S5P_IRQ_VIC3(5)
@@ -121,8 +121,12 @@
 #define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
+/* GPIO interrupt */
+#define S5P_GPIOINT_BASE	(IRQ_EINT(31) + 1)
+#define S5P_GPIOINT_GROUP_MAXNR	22
+
 /* Set the default NR_IRQS */
-#define NR_IRQS			(IRQ_EINT(31) + 1)
+#define NR_IRQS			(IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
 
 /* Compatibility */
 #define IRQ_LCD_FIFO		IRQ_LCD0
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 34eb168ec950..861d7fe11fc9 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -17,7 +17,10 @@
 #include <plat/map-s5p.h>
 
 #define S5PC110_PA_ONENAND	(0xB0000000)
+#define S5P_PA_ONENAND		S5PC110_PA_ONENAND
+
 #define S5PC110_PA_ONENAND_DMA	(0xB0600000)
+#define S5P_PA_ONENAND_DMA	S5PC110_PA_ONENAND_DMA
 
 #define S5PV210_PA_CHIPID	(0xE0000000)
 #define S5P_PA_CHIPID		S5PV210_PA_CHIPID
@@ -26,12 +29,13 @@
 #define S5P_PA_SYSCON		S5PV210_PA_SYSCON
 
 #define S5PV210_PA_GPIO		(0xE0200000)
-#define S5P_PA_GPIO		S5PV210_PA_GPIO
 
 /* SPI */
 #define S5PV210_PA_SPI0		0xE1300000
 #define S5PV210_PA_SPI1		0xE1400000
 
+#define S5PV210_PA_KEYPAD	(0xE1600000)
+
 #define S5PV210_PA_IIC0		(0xE1800000)
 #define S5PV210_PA_IIC1		(0xFAB00000)
 #define S5PV210_PA_IIC2		(0xE1A00000)
@@ -43,6 +47,7 @@
 
 #define S5PV210_PA_WATCHDOG	(0xE2700000)
 
+#define S5PV210_PA_RTC		(0xE2800000)
 #define S5PV210_PA_UART		(0xE2900000)
 
 #define S5P_PA_UART0		(S5PV210_PA_UART + 0x0)
@@ -52,31 +57,38 @@
 
 #define S5P_SZ_UART		SZ_256
 
+#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+
 #define S5PV210_PA_SROMC	(0xE8000000)
 
+#define S5PV210_PA_CFCON	(0xE8200000)
+
 #define S5PV210_PA_MDMA		0xFA200000
 #define S5PV210_PA_PDMA0	0xE0900000
 #define S5PV210_PA_PDMA1	0xE0A00000
 
 #define S5PV210_PA_FB		(0xF8000000)
 
+#define S5PV210_PA_FIMC0	(0xFB200000)
+#define S5PV210_PA_FIMC1	(0xFB300000)
+#define S5PV210_PA_FIMC2	(0xFB400000)
+
 #define S5PV210_PA_HSMMC(x)	(0xEB000000 + ((x) * 0x100000))
 
-#define S5PV210_PA_VIC0		(0xF2000000)
-#define S5P_PA_VIC0		S5PV210_PA_VIC0
+#define S5PV210_PA_HSOTG	(0xEC000000)
+#define S5PV210_PA_HSPHY	(0xEC100000)
 
+#define S5PV210_PA_VIC0		(0xF2000000)
 #define S5PV210_PA_VIC1		(0xF2100000)
-#define S5P_PA_VIC1		S5PV210_PA_VIC1
-
 #define S5PV210_PA_VIC2		(0xF2200000)
-#define S5P_PA_VIC2		S5PV210_PA_VIC2
-
 #define S5PV210_PA_VIC3		(0xF2300000)
-#define S5P_PA_VIC3		S5PV210_PA_VIC3
 
 #define S5PV210_PA_SDRAM	(0x20000000)
 #define S5P_PA_SDRAM		S5PV210_PA_SDRAM
 
+/* S/PDIF */
+#define S5PV210_PA_SPDIF	0xE1100000
+
 /* I2S */
 #define S5PV210_PA_IIS0		0xEEE30000
 #define S5PV210_PA_IIS1		0xE2100000
@@ -92,17 +104,28 @@
 
 #define S5PV210_PA_ADC		(0xE1700000)
 
+#define S5PV210_PA_DMC0		(0xF0000000)
+#define S5PV210_PA_DMC1		(0xF1400000)
+
 /* compatibiltiy defines. */
 #define S3C_PA_UART		S5PV210_PA_UART
 #define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
 #define S3C_PA_HSMMC1		S5PV210_PA_HSMMC(1)
 #define S3C_PA_HSMMC2		S5PV210_PA_HSMMC(2)
+#define S3C_PA_HSMMC3		S5PV210_PA_HSMMC(3)
 #define S3C_PA_IIC		S5PV210_PA_IIC0
 #define S3C_PA_IIC1		S5PV210_PA_IIC1
 #define S3C_PA_IIC2		S5PV210_PA_IIC2
 #define S3C_PA_FB		S5PV210_PA_FB
+#define S3C_PA_RTC		S5PV210_PA_RTC
 #define S3C_PA_WDT		S5PV210_PA_WATCHDOG
+#define S3C_PA_USB_HSOTG	S5PV210_PA_HSOTG
+#define S5P_PA_FIMC0		S5PV210_PA_FIMC0
+#define S5P_PA_FIMC1		S5PV210_PA_FIMC1
+#define S5P_PA_FIMC2		S5PV210_PA_FIMC2
 
 #define SAMSUNG_PA_ADC		S5PV210_PA_ADC
+#define SAMSUNG_PA_CFCON	S5PV210_PA_CFCON
+#define SAMSUNG_PA_KEYPAD	S5PV210_PA_KEYPAD
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
index 379117e27600..d503e0c4ce4f 100644
--- a/arch/arm/mach-s5pv210/include/mach/memory.h
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -16,8 +16,13 @@
 #define PHYS_OFFSET		UL(0x20000000)
 #define CONSISTENT_DMA_SIZE	(SZ_8M + SZ_4M + SZ_2M)
 
-/* Maximum of 256MiB in one bank */
-#define MAX_PHYSMEM_BITS	32
+/*
+ * Sparsemem support
+ * Physical memory can be located from 0x20000000 to 0x7fffffff,
+ * so MAX_PHYSMEM_BITS is 31.
+ */
+
+#define MAX_PHYSMEM_BITS	31
 #define SECTION_SIZE_BITS	28
 
 #endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h
new file mode 100644
index 000000000000..e8d394f8b057
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h
@@ -0,0 +1,43 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	/* nothing here yet */
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	__raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
+	__raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+	/* nothing here yet */
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+	/* nothing here yet */
+}
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+	/* nothing here yet */
+}
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 2a25ab40c863..ebaabe021af9 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -25,6 +25,7 @@
 #define S5P_APLL_CON		S5P_CLKREG(0x100)
 #define S5P_MPLL_CON		S5P_CLKREG(0x108)
 #define S5P_EPLL_CON		S5P_CLKREG(0x110)
+#define S5P_EPLL_CON1		S5P_CLKREG(0x114)
 #define S5P_VPLL_CON		S5P_CLKREG(0x120)
 
 #define S5P_CLK_SRC0		S5P_CLKREG(0x200)
@@ -67,11 +68,28 @@
 #define S5P_CLKGATE_BUS1	S5P_CLKREG(0x488)
 #define S5P_CLK_OUT		S5P_CLKREG(0x500)
 
+/* DIV/MUX STATUS */
+#define S5P_CLKDIV_STAT0	S5P_CLKREG(0x1000)
+#define S5P_CLKDIV_STAT1	S5P_CLKREG(0x1004)
+#define S5P_CLKMUX_STAT0	S5P_CLKREG(0x1100)
+#define S5P_CLKMUX_STAT1	S5P_CLKREG(0x1104)
+
 /* CLKSRC0 */
-#define S5P_CLKSRC0_MUX200_MASK		(0x1<<16)
+#define S5P_CLKSRC0_MUX200_SHIFT	(16)
+#define S5P_CLKSRC0_MUX200_MASK		(0x1 << S5P_CLKSRC0_MUX200_SHIFT)
 #define S5P_CLKSRC0_MUX166_MASK		(0x1<<20)
 #define S5P_CLKSRC0_MUX133_MASK		(0x1<<24)
 
+/* CLKSRC2 */
+#define S5P_CLKSRC2_G3D_SHIFT           (0)
+#define S5P_CLKSRC2_G3D_MASK            (0x3 << S5P_CLKSRC2_G3D_SHIFT)
+#define S5P_CLKSRC2_MFC_SHIFT           (4)
+#define S5P_CLKSRC2_MFC_MASK            (0x3 << S5P_CLKSRC2_MFC_SHIFT)
+
+/* CLKSRC6*/
+#define S5P_CLKSRC6_ONEDRAM_SHIFT       (24)
+#define S5P_CLKSRC6_ONEDRAM_MASK        (0x3 << S5P_CLKSRC6_ONEDRAM_SHIFT)
+
 /* CLKDIV0 */
 #define S5P_CLKDIV0_APLL_SHIFT		(0)
 #define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
@@ -90,10 +108,24 @@
 #define S5P_CLKDIV0_PCLK66_SHIFT	(28)
 #define S5P_CLKDIV0_PCLK66_MASK		(0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
 
+/* CLKDIV2 */
+#define S5P_CLKDIV2_G3D_SHIFT           (0)
+#define S5P_CLKDIV2_G3D_MASK            (0xF << S5P_CLKDIV2_G3D_SHIFT)
+#define S5P_CLKDIV2_MFC_SHIFT           (4)
+#define S5P_CLKDIV2_MFC_MASK            (0xF << S5P_CLKDIV2_MFC_SHIFT)
+
+/* CLKDIV6 */
+#define S5P_CLKDIV6_ONEDRAM_SHIFT       (28)
+#define S5P_CLKDIV6_ONEDRAM_MASK        (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT)
+
+#define S5P_SWRESET		S5P_CLKREG(0x2000)
+
+#define S5P_ARM_MCS_CON		S5P_CLKREG(0x6100)
+
 /* Registers related to power management */
 #define S5P_PWR_CFG		S5P_CLKREG(0xC000)
 #define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0xC004)
-#define S5P_WAKEUP_MASK 	S5P_CLKREG(0xC008)
+#define S5P_WAKEUP_MASK		S5P_CLKREG(0xC008)
 #define S5P_PWR_MODE		S5P_CLKREG(0xC00C)
 #define S5P_NORMAL_CFG		S5P_CLKREG(0xC010)
 #define S5P_IDLE_CFG		S5P_CLKREG(0xC020)
@@ -157,8 +189,11 @@
 #define S5P_SLEEP_CFG_USBOSC_EN		(1 << 1)
 
 /* OTHERS Resgister */
+#define S5P_OTHERS_RET_IO		(1 << 31)
+#define S5P_OTHERS_RET_CF		(1 << 30)
+#define S5P_OTHERS_RET_MMC		(1 << 29)
+#define S5P_OTHERS_RET_UART		(1 << 28)
 #define S5P_OTHERS_USB_SIG_MASK		(1 << 16)
-#define S5P_OTHERS_MIPI_DPHY_EN		(1 << 28)
 
 /* MIPI */
 #define S5P_MIPI_DPHY_EN		(3)
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
index 49e029b4978a..de0c89976078 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
@@ -31,13 +31,6 @@
 
 #define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
 
-/* values for S5P_EXTINT0 */
-#define S5P_EXTINT_LOWLEV		(0x00)
-#define S5P_EXTINT_HILEV		(0x01)
-#define S5P_EXTINT_FALLEDGE		(0x02)
-#define S5P_EXTINT_RISEEDGE		(0x03)
-#define S5P_EXTINT_BOTHEDGE		(0x04)
-
 #define EINT_MODE		S3C_GPIO_SFN(0xf)
 
 #define EINT_GPIO_0(x)		S5PV210_GPH0(x)
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h
new file mode 100644
index 000000000000..26691d39d0f4
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-sys.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-s5pv210/include/mach/regs-sys.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - System registers definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5PV210_USB_PHY_CON	(S3C_VA_SYS + 0xE80C)
+#define S5PV210_USB_PHY0_EN	(1 << 0)
+#define S5PV210_USB_PHY1_EN	(1 << 1)
+
+/* compatibility defines for s3c-hsotg driver */
+#define S3C64XX_OTHERS		S5PV210_USB_PHY_CON
+#define S3C64XX_OTHERS_USBMASK	S5PV210_USB_PHY0_EN
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
index 1ca04d5025b3..af8a200b2135 100644
--- a/arch/arm/mach-s5pv210/include/mach/system.h
+++ b/arch/arm/mach-s5pv210/include/mach/system.h
@@ -13,12 +13,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
+#include <plat/system-reset.h>
 
-static void arch_reset(char mode, const char *cmd)
+static void arch_idle(void)
 {
 	/* nothing here yet */
 }
diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
index 58f515e0747e..a6c659d68a5d 100644
--- a/arch/arm/mach-s5pv210/include/mach/vmalloc.h
+++ b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
@@ -17,6 +17,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H __FILE__
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 10bc76ec4025..28677caf3613 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -13,6 +13,14 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mfd/max8998.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/regulator/fixed.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -23,61 +31,69 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-fb.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
+#include <plat/fimc-core.h>
+#include <plat/sdhci.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define AQUILA_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define AQUILA_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
+#define AQUILA_UFCON_DEFAULT	S3C2410_UFCON_FIFOMODE
 
-static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= AQUILA_UCON_DEFAULT,
+		.ulcon		= AQUILA_ULCON_DEFAULT,
+		/*
+		 * Actually UART0 can support 256 bytes fifo, but aquila board
+		 * supports 128 bytes fifo because of initial chip bug
+		 */
+		.ufcon		= AQUILA_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= AQUILA_UCON_DEFAULT,
+		.ulcon		= AQUILA_ULCON_DEFAULT,
+		.ufcon		= AQUILA_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= AQUILA_UCON_DEFAULT,
+		.ulcon		= AQUILA_ULCON_DEFAULT,
+		.ufcon		= AQUILA_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 	[3] = {
 		.hwport		= 3,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= AQUILA_UCON_DEFAULT,
+		.ulcon		= AQUILA_ULCON_DEFAULT,
+		.ufcon		= AQUILA_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 };
 
 /* Frame Buffer */
 static struct s3c_fb_pd_win aquila_fb_win0 = {
 	.win_mode = {
-		.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
 		.left_margin = 16,
 		.right_margin = 16,
 		.upper_margin = 3,
@@ -93,7 +109,6 @@ static struct s3c_fb_pd_win aquila_fb_win0 = {
 
 static struct s3c_fb_pd_win aquila_fb_win1 = {
 	.win_mode = {
-		.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
 		.left_margin = 16,
 		.right_margin = 16,
 		.upper_margin = 3,
@@ -116,19 +131,550 @@ static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
 	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
 };
 
+/* MAX8998 regulators */
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+
+static struct regulator_init_data aquila_ldo2_data = {
+	.constraints	= {
+		.name		= "VALIVE_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data aquila_ldo3_data = {
+	.constraints	= {
+		.name		= "VUSB/MIPI_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo4_data = {
+	.constraints	= {
+		.name		= "VDAC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo5_data = {
+	.constraints	= {
+		.name		= "VTF_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo6_data = {
+	.constraints	= {
+		.name		= "VCC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo7_data = {
+	.constraints	= {
+		.name		= "VCC_3.0V",
+		.min_uV		= 3000000,
+		.max_uV		= 3000000,
+		.apply_uV	= 1,
+		.boot_on	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo8_data = {
+	.constraints	= {
+		.name		= "VUSB/VADC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo9_data = {
+	.constraints	= {
+		.name		= "VCC/VCAM_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo10_data = {
+	.constraints	= {
+		.name		= "VPLL_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.boot_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo11_data = {
+	.constraints	= {
+		.name		= "CAM_IO_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo12_data = {
+	.constraints	= {
+		.name		= "CAM_ISP_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo13_data = {
+	.constraints	= {
+		.name		= "CAM_A_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo14_data = {
+	.constraints	= {
+		.name		= "CAM_CIF_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo15_data = {
+	.constraints	= {
+		.name		= "CAM_AF_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo16_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo17_data = {
+	.constraints	= {
+		.name		= "CAM_8M_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+/* BUCK */
+static struct regulator_consumer_supply buck1_consumer[] = {
+	{	.supply	= "vddarm", },
+};
+
+static struct regulator_consumer_supply buck2_consumer[] = {
+	{	.supply	= "vddint", },
+};
+
+static struct regulator_init_data aquila_buck1_data = {
+	.constraints	= {
+		.name		= "VARM_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
+	.consumer_supplies	= buck1_consumer,
+};
+
+static struct regulator_init_data aquila_buck2_data = {
+	.constraints	= {
+		.name		= "VINT_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
+	.consumer_supplies	= buck2_consumer,
+};
+
+static struct regulator_init_data aquila_buck3_data = {
+	.constraints	= {
+		.name		= "VCC_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data aquila_buck4_data = {
+	.constraints	= {
+		.name		= "CAM_CORE_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct max8998_regulator_data aquila_regulators[] = {
+	{ MAX8998_LDO2,  &aquila_ldo2_data },
+	{ MAX8998_LDO3,  &aquila_ldo3_data },
+	{ MAX8998_LDO4,  &aquila_ldo4_data },
+	{ MAX8998_LDO5,  &aquila_ldo5_data },
+	{ MAX8998_LDO6,  &aquila_ldo6_data },
+	{ MAX8998_LDO7,  &aquila_ldo7_data },
+	{ MAX8998_LDO8,  &aquila_ldo8_data },
+	{ MAX8998_LDO9,  &aquila_ldo9_data },
+	{ MAX8998_LDO10, &aquila_ldo10_data },
+	{ MAX8998_LDO11, &aquila_ldo11_data },
+	{ MAX8998_LDO12, &aquila_ldo12_data },
+	{ MAX8998_LDO13, &aquila_ldo13_data },
+	{ MAX8998_LDO14, &aquila_ldo14_data },
+	{ MAX8998_LDO15, &aquila_ldo15_data },
+	{ MAX8998_LDO16, &aquila_ldo16_data },
+	{ MAX8998_LDO17, &aquila_ldo17_data },
+	{ MAX8998_BUCK1, &aquila_buck1_data },
+	{ MAX8998_BUCK2, &aquila_buck2_data },
+	{ MAX8998_BUCK3, &aquila_buck3_data },
+	{ MAX8998_BUCK4, &aquila_buck4_data },
+};
+
+static struct max8998_platform_data aquila_max8998_pdata = {
+	.num_regulators	= ARRAY_SIZE(aquila_regulators),
+	.regulators	= aquila_regulators,
+};
+#endif
+
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "DBVDD",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "AVDD2",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "CPVDD",
+	},
+};
+
+static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD1",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD2",
+	},
+};
+
+static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage0_supplies,
+};
+
+static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage1_supplies,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
+	.supply_name	= "VCC_1.8V_PDA",
+	.microvolts	= 1800000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage0_init_data,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
+	.supply_name	= "V_BAT",
+	.microvolts	= 3700000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage1_init_data,
+};
+
+static struct platform_device wm8994_fixed_voltage0 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage0_config,
+	},
+};
+
+static struct platform_device wm8994_fixed_voltage1 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage1_config,
+	},
+};
+
+static struct regulator_consumer_supply wm8994_avdd1_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "AVDD1",
+};
+
+static struct regulator_consumer_supply wm8994_dcvdd_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "DCVDD",
+};
+
+static struct regulator_init_data wm8994_ldo1_data = {
+	.constraints	= {
+		.name		= "AVDD1_3.0V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_avdd1_supply,
+};
+
+static struct regulator_init_data wm8994_ldo2_data = {
+	.constraints	= {
+		.name		= "DCVDD_1.0V",
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_dcvdd_supply,
+};
+
+static struct wm8994_pdata wm8994_platform_data = {
+	/* configure gpio1 function: 0x0001(Logic level input/output) */
+	.gpio_defaults[0] = 0x0001,
+	/* configure gpio3/4/5/7 function for AIF2 voice */
+	.gpio_defaults[2] = 0x8100,
+	.gpio_defaults[3] = 0x8100,
+	.gpio_defaults[4] = 0x8100,
+	.gpio_defaults[6] = 0x0100,
+	/* configure gpio8/9/10/11 function for AIF3 BT */
+	.gpio_defaults[7] = 0x8100,
+	.gpio_defaults[8] = 0x0100,
+	.gpio_defaults[9] = 0x0100,
+	.gpio_defaults[10] = 0x0100,
+	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+};
+
+/* GPIO I2C PMIC */
+#define AP_I2C_GPIO_PMIC_BUS_4	4
+static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
+	.sda_pin	= S5PV210_GPJ4(0),	/* XMSMCSN */
+	.scl_pin	= S5PV210_GPJ4(3),	/* XMSMIRQN */
+};
+
+static struct platform_device aquila_i2c_gpio_pmic = {
+	.name		= "i2c-gpio",
+	.id		= AP_I2C_GPIO_PMIC_BUS_4,
+	.dev		= {
+		.platform_data = &aquila_i2c_gpio_pmic_data,
+	},
+};
+
+static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+	{
+		/* 0xCC when SRAD = 0 */
+		I2C_BOARD_INFO("max8998", 0xCC >> 1),
+		.platform_data = &aquila_max8998_pdata,
+	},
+#endif
+};
+
+/* GPIO I2C AP 1.8V */
+#define AP_I2C_GPIO_BUS_5	5
+static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = {
+	.sda_pin	= S5PV210_MP05(3),	/* XM0ADDR_11 */
+	.scl_pin	= S5PV210_MP05(2),	/* XM0ADDR_10 */
+};
+
+static struct platform_device aquila_i2c_gpio5 = {
+	.name		= "i2c-gpio",
+	.id		= AP_I2C_GPIO_BUS_5,
+	.dev		= {
+		.platform_data	= &aquila_i2c_gpio5_data,
+	},
+};
+
+static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
+	{
+		/* CS/ADDR = low 0x34 (FYI: high = 0x36) */
+		I2C_BOARD_INFO("wm8994", 0x1a),
+		.platform_data	= &wm8994_platform_data,
+	},
+};
+
+/* PMIC Power button */
+static struct gpio_keys_button aquila_gpio_keys_table[] = {
+	{
+		.code 		= KEY_POWER,
+		.gpio		= S5PV210_GPH2(6),
+		.desc		= "gpio-keys: KEY_POWER",
+		.type		= EV_KEY,
+		.active_low	= 1,
+		.wakeup		= 1,
+		.debounce_interval = 1,
+	},
+};
+
+static struct gpio_keys_platform_data aquila_gpio_keys_data = {
+	.buttons	= aquila_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(aquila_gpio_keys_table),
+};
+
+static struct platform_device aquila_device_gpiokeys = {
+	.name = "gpio-keys",
+	.dev = {
+		.platform_data = &aquila_gpio_keys_data,
+	},
+};
+
+static void __init aquila_pmic_init(void)
+{
+	/* AP_PMIC_IRQ: EINT7 */
+	s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
+
+	/* nPower: EINT22 */
+	s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
+}
+
+/* MoviNAND */
+static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+};
+
+/* Wireless LAN */
+static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
+	/* ext_cd_{init,cleanup} callbacks will be added later */
+};
+
+/* External Flash */
+#define AQUILA_EXT_FLASH_EN	S5PV210_MP05(4)
+#define AQUILA_EXT_FLASH_CD	S5PV210_GPH3(4)
+static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= AQUILA_EXT_FLASH_CD,
+	.ext_cd_gpio_invert	= 1,
+};
+
+static void aquila_setup_sdhci(void)
+{
+	gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
+	gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
+
+	s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
+	s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
+	s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
+};
+
 static struct platform_device *aquila_devices[] __initdata = {
+	&aquila_i2c_gpio_pmic,
+	&aquila_i2c_gpio5,
+	&aquila_device_gpiokeys,
 	&s3c_device_fb,
+	&s5p_device_onenand,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s5pv210_device_iis0,
+	&wm8994_fixed_voltage0,
+	&wm8994_fixed_voltage1,
 };
 
+static void __init aquila_sound_init(void)
+{
+	unsigned int gpio;
+
+	/* CODEC_XTAL_EN
+	 *
+	 * The Aquila board have a oscillator which provide main clock
+	 * to WM8994 codec. The oscillator provide 24MHz clock to WM8994
+	 * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator.
+	 * */
+	gpio = S5PV210_GPH3(2);		/* XEINT_26 */
+	gpio_request(gpio, "CODEC_XTAL_EN");
+	s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
+	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+
+	/* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
+	 * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
+	 * because it needs 24MHz clock to operate WM8994 codec.
+	 */
+	__raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
+}
+
 static void __init aquila_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+	s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
 }
 
 static void __init aquila_machine_init(void)
 {
+	/* PMIC */
+	aquila_pmic_init();
+	i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
+			ARRAY_SIZE(i2c_gpio_pmic_devs));
+	/* SDHCI */
+	aquila_setup_sdhci();
+
+	s3c_fimc_setname(0, "s5p-fimc");
+	s3c_fimc_setname(1, "s5p-fimc");
+	s3c_fimc_setname(2, "s5p-fimc");
+
+	/* SOUND */
+	aquila_sound_init();
+	i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
+			ARRAY_SIZE(i2c_gpio5_devs));
+
 	/* FB */
 	s3c_fb_set_platdata(&aquila_lcd_pdata);
 
@@ -139,8 +685,6 @@ MACHINE_START(AQUILA, "Aquila")
 	/* Maintainers:
 	   Marek Szyprowski <m.szyprowski@samsung.com>
 	   Kyungmin Park <kyungmin.park@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= aquila_map_io,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 4863b13824e4..b1dcf964a768 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -12,6 +12,19 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/qt602240_ts.h>
+#include <linux/mfd/max8998.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/regulator/fixed.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/lcd.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -20,60 +33,782 @@
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
+#include <mach/regs-fb.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/sdhci.h>
+#include <plat/clock.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define GONI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define GONI_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
+#define GONI_UFCON_DEFAULT	S3C2410_UFCON_FIFOMODE
 
 static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= GONI_UCON_DEFAULT,
+		.ulcon		= GONI_ULCON_DEFAULT,
+		.ufcon		= GONI_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG256 | S5PV210_UFCON_RXTRIG256,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= GONI_UCON_DEFAULT,
+		.ulcon		= GONI_ULCON_DEFAULT,
+		.ufcon		= GONI_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= GONI_UCON_DEFAULT,
+		.ulcon		= GONI_ULCON_DEFAULT,
+		.ufcon		= GONI_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 	[3] = {
 		.hwport		= 3,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= GONI_UCON_DEFAULT,
+		.ulcon		= GONI_ULCON_DEFAULT,
+		.ufcon		= GONI_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win goni_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 16,
+		.right_margin	= 16,
+		.upper_margin	= 2,
+		.lower_margin	= 28,
+		.hsync_len	= 2,
+		.vsync_len	= 1,
+		.xres		= 480,
+		.yres		= 800,
+		.refresh	= 55,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata goni_lcd_pdata __initdata = {
+	.win[0]		= &goni_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
+};
+
+static int lcd_power_on(struct lcd_device *ld, int enable)
+{
+	return 1;
+}
+
+static int reset_lcd(struct lcd_device *ld)
+{
+	static unsigned int first = 1;
+	int reset_gpio = -1;
+
+	reset_gpio = S5PV210_MP05(5);
+
+	if (first) {
+		gpio_request(reset_gpio, "MLCD_RST");
+		first = 0;
+	}
+
+	gpio_direction_output(reset_gpio, 1);
+	return 1;
+}
+
+static struct lcd_platform_data goni_lcd_platform_data = {
+	.reset			= reset_lcd,
+	.power_on		= lcd_power_on,
+	.lcd_enabled		= 0,
+	.reset_delay		= 120,	/* 120ms */
+	.power_on_delay		= 25,	/* 25ms */
+	.power_off_delay	= 200,	/* 200ms */
+};
+
+#define LCD_BUS_NUM	3
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "s6e63m0",
+		.platform_data	= &goni_lcd_platform_data,
+		.max_speed_hz	= 1200000,
+		.bus_num	= LCD_BUS_NUM,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_3,
+		.controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */
+	},
+};
+
+static struct spi_gpio_platform_data lcd_spi_gpio_data = {
+	.sck	= S5PV210_MP04(1), /* DISPLAY_CLK */
+	.mosi	= S5PV210_MP04(3), /* DISPLAY_SI */
+	.miso	= SPI_GPIO_NO_MISO,
+	.num_chipselect	= 1,
+};
+
+static struct platform_device goni_spi_gpio = {
+	.name	= "spi_gpio",
+	.id	= LCD_BUS_NUM,
+	.dev	= {
+		.parent		= &s3c_device_fb.dev,
+		.platform_data	= &lcd_spi_gpio_data,
+	},
+};
+
+/* KEYPAD */
+static uint32_t keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 1, KEY_MENU),		/* Send */
+	KEY(0, 2, KEY_BACK),		/* End */
+	KEY(1, 1, KEY_CONFIG),		/* Half shot */
+	KEY(1, 2, KEY_VOLUMEUP),
+	KEY(2, 1, KEY_CAMERA),		/* Full shot */
+	KEY(2, 2, KEY_VOLUMEDOWN),
+};
+
+static struct matrix_keymap_data keymap_data __initdata = {
+	.keymap		= keymap,
+	.keymap_size	= ARRAY_SIZE(keymap),
+};
+
+static struct samsung_keypad_platdata keypad_data __initdata = {
+	.keymap_data	= &keymap_data,
+	.rows		= 3,
+	.cols		= 3,
+};
+
+/* Radio */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("si470x", 0x10),
+	},
+};
+
+static void __init goni_radio_init(void)
+{
+	int gpio;
+
+	gpio = S5PV210_GPJ2(4);			/* XMSMDATA_4 */
+	gpio_request(gpio, "FM_INT");
+	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+	i2c1_devs[0].irq = gpio_to_irq(gpio);
+
+	gpio = S5PV210_GPJ2(5);			/* XMSMDATA_5 */
+	gpio_request(gpio, "FM_RST");
+	gpio_direction_output(gpio, 1);
+}
+
+/* TSP */
+static struct qt602240_platform_data qt602240_platform_data = {
+	.x_line		= 17,
+	.y_line		= 11,
+	.x_size		= 800,
+	.y_size		= 480,
+	.blen		= 0x21,
+	.threshold	= 0x28,
+	.voltage	= 2800000,              /* 2.8V */
+	.orient		= QT602240_DIAGONAL,
+};
+
+static struct s3c2410_platform_i2c i2c2_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 2,
+	.slave_addr	= 0x10,
+	.frequency	= 400 * 1000,
+	.sda_delay	= 100,
+};
+
+static struct i2c_board_info i2c2_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("qt602240_ts", 0x4a),
+		.platform_data = &qt602240_platform_data,
+	},
+};
+
+static void __init goni_tsp_init(void)
+{
+	int gpio;
+
+	gpio = S5PV210_GPJ1(3);		/* XMSMADDR_11 */
+	gpio_request(gpio, "TSP_LDO_ON");
+	gpio_direction_output(gpio, 1);
+	gpio_export(gpio, 0);
+
+	gpio = S5PV210_GPJ0(5);		/* XMSMADDR_5 */
+	gpio_request(gpio, "TSP_INT");
+
+	s5p_register_gpio_interrupt(gpio);
+	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+	i2c2_devs[0].irq = gpio_to_irq(gpio);
+}
+
+/* MAX8998 regulators */
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+
+static struct regulator_consumer_supply goni_ldo5_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+};
+
+static struct regulator_init_data goni_ldo2_data = {
+	.constraints	= {
+		.name		= "VALIVE_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data goni_ldo3_data = {
+	.constraints	= {
+		.name		= "VUSB/MIPI_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo4_data = {
+	.constraints	= {
+		.name		= "VDAC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo5_data = {
+	.constraints	= {
+		.name		= "VTF_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers),
+	.consumer_supplies = goni_ldo5_consumers,
+};
+
+static struct regulator_init_data goni_ldo6_data = {
+	.constraints	= {
+		.name		= "VCC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo7_data = {
+	.constraints	= {
+		.name		= "VLCD_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo8_data = {
+	.constraints	= {
+		.name		= "VUSB/VADC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo9_data = {
+	.constraints	= {
+		.name		= "VCC/VCAM_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo10_data = {
+	.constraints	= {
+		.name		= "VPLL_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.boot_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo11_data = {
+	.constraints	= {
+		.name		= "CAM_IO_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo12_data = {
+	.constraints	= {
+		.name		= "CAM_ISP_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo13_data = {
+	.constraints	= {
+		.name		= "CAM_A_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo14_data = {
+	.constraints	= {
+		.name		= "CAM_CIF_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo15_data = {
+	.constraints	= {
+		.name		= "CAM_AF_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo16_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo17_data = {
+	.constraints	= {
+		.name		= "VCC_3.0V_LCD",
+		.min_uV		= 3000000,
+		.max_uV		= 3000000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+/* BUCK */
+static struct regulator_consumer_supply buck1_consumer[] = {
+	{	.supply	= "vddarm", },
+};
+
+static struct regulator_consumer_supply buck2_consumer[] = {
+	{	.supply	= "vddint", },
+};
+
+static struct regulator_init_data goni_buck1_data = {
+	.constraints	= {
+		.name		= "VARM_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
+	.consumer_supplies	= buck1_consumer,
+};
+
+static struct regulator_init_data goni_buck2_data = {
+	.constraints	= {
+		.name		= "VINT_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
+	.consumer_supplies	= buck2_consumer,
+};
+
+static struct regulator_init_data goni_buck3_data = {
+	.constraints	= {
+		.name		= "VCC_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data goni_buck4_data = {
+	.constraints	= {
+		.name		= "CAM_CORE_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct max8998_regulator_data goni_regulators[] = {
+	{ MAX8998_LDO2,  &goni_ldo2_data },
+	{ MAX8998_LDO3,  &goni_ldo3_data },
+	{ MAX8998_LDO4,  &goni_ldo4_data },
+	{ MAX8998_LDO5,  &goni_ldo5_data },
+	{ MAX8998_LDO6,  &goni_ldo6_data },
+	{ MAX8998_LDO7,  &goni_ldo7_data },
+	{ MAX8998_LDO8,  &goni_ldo8_data },
+	{ MAX8998_LDO9,  &goni_ldo9_data },
+	{ MAX8998_LDO10, &goni_ldo10_data },
+	{ MAX8998_LDO11, &goni_ldo11_data },
+	{ MAX8998_LDO12, &goni_ldo12_data },
+	{ MAX8998_LDO13, &goni_ldo13_data },
+	{ MAX8998_LDO14, &goni_ldo14_data },
+	{ MAX8998_LDO15, &goni_ldo15_data },
+	{ MAX8998_LDO16, &goni_ldo16_data },
+	{ MAX8998_LDO17, &goni_ldo17_data },
+	{ MAX8998_BUCK1, &goni_buck1_data },
+	{ MAX8998_BUCK2, &goni_buck2_data },
+	{ MAX8998_BUCK3, &goni_buck3_data },
+	{ MAX8998_BUCK4, &goni_buck4_data },
+};
+
+static struct max8998_platform_data goni_max8998_pdata = {
+	.num_regulators	= ARRAY_SIZE(goni_regulators),
+	.regulators	= goni_regulators,
+};
+#endif
+
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "DBVDD",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "AVDD2",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "CPVDD",
+	},
+};
+
+static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD1",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD2",
+	},
+};
+
+static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage0_supplies,
+};
+
+static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage1_supplies,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
+	.supply_name	= "VCC_1.8V_PDA",
+	.microvolts	= 1800000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage0_init_data,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
+	.supply_name	= "V_BAT",
+	.microvolts	= 3700000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage1_init_data,
+};
+
+static struct platform_device wm8994_fixed_voltage0 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage0_config,
+	},
+};
+
+static struct platform_device wm8994_fixed_voltage1 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage1_config,
+	},
+};
+
+static struct regulator_consumer_supply wm8994_avdd1_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "AVDD1",
+};
+
+static struct regulator_consumer_supply wm8994_dcvdd_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "DCVDD",
+};
+
+static struct regulator_init_data wm8994_ldo1_data = {
+	.constraints	= {
+		.name		= "AVDD1_3.0V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_avdd1_supply,
+};
+
+static struct regulator_init_data wm8994_ldo2_data = {
+	.constraints	= {
+		.name		= "DCVDD_1.0V",
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_dcvdd_supply,
+};
+
+static struct wm8994_pdata wm8994_platform_data = {
+	/* configure gpio1 function: 0x0001(Logic level input/output) */
+	.gpio_defaults[0] = 0x0001,
+	/* configure gpio3/4/5/7 function for AIF2 voice */
+	.gpio_defaults[2] = 0x8100,
+	.gpio_defaults[3] = 0x8100,
+	.gpio_defaults[4] = 0x8100,
+	.gpio_defaults[6] = 0x0100,
+	/* configure gpio8/9/10/11 function for AIF3 BT */
+	.gpio_defaults[7] = 0x8100,
+	.gpio_defaults[8] = 0x0100,
+	.gpio_defaults[9] = 0x0100,
+	.gpio_defaults[10] = 0x0100,
+	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+};
+
+/* GPIO I2C PMIC */
+#define AP_I2C_GPIO_PMIC_BUS_4	4
+static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
+	.sda_pin	= S5PV210_GPJ4(0),	/* XMSMCSN */
+	.scl_pin	= S5PV210_GPJ4(3),	/* XMSMIRQN */
+};
+
+static struct platform_device goni_i2c_gpio_pmic = {
+	.name		= "i2c-gpio",
+	.id		= AP_I2C_GPIO_PMIC_BUS_4,
+	.dev		= {
+		.platform_data	= &goni_i2c_gpio_pmic_data,
+	},
+};
+
+static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+	{
+		/* 0xCC when SRAD = 0 */
+		I2C_BOARD_INFO("max8998", 0xCC >> 1),
+		.platform_data = &goni_max8998_pdata,
+	},
+#endif
+};
+
+/* GPIO I2C AP 1.8V */
+#define AP_I2C_GPIO_BUS_5	5
+static struct i2c_gpio_platform_data goni_i2c_gpio5_data = {
+	.sda_pin	= S5PV210_MP05(3),	/* XM0ADDR_11 */
+	.scl_pin	= S5PV210_MP05(2),	/* XM0ADDR_10 */
+};
+
+static struct platform_device goni_i2c_gpio5 = {
+	.name		= "i2c-gpio",
+	.id		= AP_I2C_GPIO_BUS_5,
+	.dev		= {
+		.platform_data	= &goni_i2c_gpio5_data,
+	},
+};
+
+static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
+	{
+		/* CS/ADDR = low 0x34 (FYI: high = 0x36) */
+		I2C_BOARD_INFO("wm8994", 0x1a),
+		.platform_data	= &wm8994_platform_data,
+	},
+};
+
+/* PMIC Power button */
+static struct gpio_keys_button goni_gpio_keys_table[] = {
+	{
+		.code 		= KEY_POWER,
+		.gpio		= S5PV210_GPH2(6),
+		.desc		= "gpio-keys: KEY_POWER",
+		.type		= EV_KEY,
+		.active_low	= 1,
+		.wakeup		= 1,
+		.debounce_interval = 1,
+	},
+};
+
+static struct gpio_keys_platform_data goni_gpio_keys_data = {
+	.buttons	= goni_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(goni_gpio_keys_table),
+};
+
+static struct platform_device goni_device_gpiokeys = {
+	.name = "gpio-keys",
+	.dev = {
+		.platform_data = &goni_gpio_keys_data,
+	},
+};
+
+static void __init goni_pmic_init(void)
+{
+	/* AP_PMIC_IRQ: EINT7 */
+	s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
+
+	/* nPower: EINT22 */
+	s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
+}
+
+/* MoviNAND */
+static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+};
+
+/* Wireless LAN */
+static struct s3c_sdhci_platdata goni_hsmmc1_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
+	/* ext_cd_{init,cleanup} callbacks will be added later */
+};
+
+/* External Flash */
+#define GONI_EXT_FLASH_EN	S5PV210_MP05(4)
+#define GONI_EXT_FLASH_CD	S5PV210_GPH3(4)
+static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= GONI_EXT_FLASH_CD,
+	.ext_cd_gpio_invert	= 1,
+};
+
+static struct regulator_consumer_supply mmc2_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data mmc2_fixed_voltage_init_data = {
+	.constraints		= {
+		.name		= "V_TF_2.8V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(mmc2_supplies),
+	.consumer_supplies	= mmc2_supplies,
+};
+
+static struct fixed_voltage_config mmc2_fixed_voltage_config = {
+	.supply_name		= "EXT_FLASH_EN",
+	.microvolts		= 2800000,
+	.gpio			= GONI_EXT_FLASH_EN,
+	.enable_high		= true,
+	.init_data		= &mmc2_fixed_voltage_init_data,
+};
+
+static struct platform_device mmc2_fixed_voltage = {
+	.name		= "reg-fixed-voltage",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &mmc2_fixed_voltage_config,
+	},
+};
+
+static void goni_setup_sdhci(void)
+{
+	s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
+	s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
+	s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
+};
+
 static struct platform_device *goni_devices[] __initdata = {
+	&s3c_device_fb,
+	&s5p_device_onenand,
+	&goni_spi_gpio,
+	&goni_i2c_gpio_pmic,
+	&goni_i2c_gpio5,
+	&mmc2_fixed_voltage,
+	&goni_device_gpiokeys,
+	&s5p_device_fimc0,
+	&s5p_device_fimc1,
+	&s5p_device_fimc2,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s5pv210_device_iis0,
+	&s3c_device_usb_hsotg,
+	&samsung_device_keypad,
+	&s3c_device_i2c1,
+	&s3c_device_i2c2,
+	&wm8994_fixed_voltage0,
+	&wm8994_fixed_voltage1,
 };
 
+static void __init goni_sound_init(void)
+{
+	/* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
+	 * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
+	 * because it needs 24MHz clock to operate WM8994 codec.
+	 */
+	__raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
+}
+
 static void __init goni_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -83,13 +818,48 @@ static void __init goni_map_io(void)
 
 static void __init goni_machine_init(void)
 {
+	/* Radio: call before I2C 1 registeration */
+	goni_radio_init();
+
+	/* I2C1 */
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+
+	/* TSP: call before I2C 2 registeration */
+	goni_tsp_init();
+
+	/* I2C2 */
+	s3c_i2c2_set_platdata(&i2c2_data);
+	i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs));
+
+	/* PMIC */
+	goni_pmic_init();
+	i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
+			ARRAY_SIZE(i2c_gpio_pmic_devs));
+	/* SDHCI */
+	goni_setup_sdhci();
+
+	/* SOUND */
+	goni_sound_init();
+	i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
+			ARRAY_SIZE(i2c_gpio5_devs));
+
+	/* FB */
+	s3c_fb_set_platdata(&goni_lcd_pdata);
+
+	/* SPI */
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+	/* KEYPAD */
+	samsung_keypad_set_platdata(&keypad_data);
+
+	clk_xusbxti.rate = 24000000;
+
 	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
 }
 
 MACHINE_START(GONI, "GONI")
 	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= goni_map_io,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 4c8903c6d104..0ad7924fe62e 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/i2c.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -25,18 +26,21 @@
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/ata.h>
+#include <plat/iic.h>
+#include <plat/pm.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define SMDKC110_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define SMDKC110_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+#define SMDKC110_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
 				 S5PV210_UFCON_TXTRIG4 |	\
 				 S5PV210_UFCON_RXTRIG4)
 
@@ -44,39 +48,61 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKC110_UCON_DEFAULT,
+		.ulcon		= SMDKC110_ULCON_DEFAULT,
+		.ufcon		= SMDKC110_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKC110_UCON_DEFAULT,
+		.ulcon		= SMDKC110_ULCON_DEFAULT,
+		.ufcon		= SMDKC110_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKC110_UCON_DEFAULT,
+		.ulcon		= SMDKC110_ULCON_DEFAULT,
+		.ufcon		= SMDKC110_UFCON_DEFAULT,
 	},
 	[3] = {
 		.hwport		= 3,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKC110_UCON_DEFAULT,
+		.ulcon		= SMDKC110_ULCON_DEFAULT,
+		.ufcon		= SMDKC110_UFCON_DEFAULT,
 	},
 };
 
+static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = {
+	.setup_gpio	= s5pv210_ide_setup_gpio,
+};
+
 static struct platform_device *smdkc110_devices[] __initdata = {
 	&s5pv210_device_iis0,
 	&s5pv210_device_ac97,
+	&s5pv210_device_spdif,
+	&s3c_device_cfcon,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c2,
+	&s3c_device_rtc,
 	&s3c_device_wdt,
 };
 
+static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
+};
+
+static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = {
+	/* To Be Updated */
+};
+
+static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = {
+	/* To Be Updated */
+};
+
 static void __init smdkc110_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -86,13 +112,25 @@ static void __init smdkc110_map_io(void)
 
 static void __init smdkc110_machine_init(void)
 {
+	s3c_pm_init();
+
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_i2c2_set_platdata(NULL);
+	i2c_register_board_info(0, smdkc110_i2c_devs0,
+			ARRAY_SIZE(smdkc110_i2c_devs0));
+	i2c_register_board_info(1, smdkc110_i2c_devs1,
+			ARRAY_SIZE(smdkc110_i2c_devs1));
+	i2c_register_board_info(2, smdkc110_i2c_devs2,
+			ARRAY_SIZE(smdkc110_i2c_devs2));
+
+	s3c_ide_set_platdata(&smdkc110_ide_pdata);
+
 	platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
 }
 
 MACHINE_START(SMDKC110, "SMDKC110")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= smdkc110_map_io,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 0d4627948040..bcd7a5d53401 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
 
@@ -27,18 +28,22 @@
 #include <plat/cpu.h>
 #include <plat/adc.h>
 #include <plat/ts.h>
+#include <plat/ata.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/pm.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+#define SMDKV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)
 
-#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+#define SMDKV210_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+#define SMDKV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
 				 S5PV210_UFCON_TXTRIG4 |	\
 				 S5PV210_UFCON_RXTRIG4)
 
@@ -46,41 +51,87 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKV210_UCON_DEFAULT,
+		.ulcon		= SMDKV210_ULCON_DEFAULT,
+		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKV210_UCON_DEFAULT,
+		.ulcon		= SMDKV210_ULCON_DEFAULT,
+		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKV210_UCON_DEFAULT,
+		.ulcon		= SMDKV210_ULCON_DEFAULT,
+		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 	[3] = {
 		.hwport		= 3,
 		.flags		= 0,
-		.ucon		= S5PV210_UCON_DEFAULT,
-		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ucon		= SMDKV210_UCON_DEFAULT,
+		.ulcon		= SMDKV210_ULCON_DEFAULT,
+		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 };
 
+static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = {
+	.setup_gpio	= s5pv210_ide_setup_gpio,
+};
+
+static uint32_t smdkv210_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdkv210_keymap_data __initdata = {
+	.keymap		= smdkv210_keymap,
+	.keymap_size	= ARRAY_SIZE(smdkv210_keymap),
+};
+
+static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
+	.keymap_data	= &smdkv210_keymap_data,
+	.rows		= 8,
+	.cols		= 8,
+};
+
 static struct platform_device *smdkv210_devices[] __initdata = {
 	&s5pv210_device_iis0,
 	&s5pv210_device_ac97,
+	&s5pv210_device_spdif,
 	&s3c_device_adc,
+	&s3c_device_cfcon,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c2,
+	&samsung_device_keypad,
+	&s3c_device_rtc,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 };
 
+static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
+};
+
+static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
+	/* To Be Updated */
+};
+
+static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
+	/* To Be Updated */
+};
+
 static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
 	.delay			= 10000,
 	.presc			= 49,
@@ -96,14 +147,28 @@ static void __init smdkv210_map_io(void)
 
 static void __init smdkv210_machine_init(void)
 {
+	s3c_pm_init();
+
+	samsung_keypad_set_platdata(&smdkv210_keypad_data);
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_i2c2_set_platdata(NULL);
+	i2c_register_board_info(0, smdkv210_i2c_devs0,
+			ARRAY_SIZE(smdkv210_i2c_devs0));
+	i2c_register_board_info(1, smdkv210_i2c_devs1,
+			ARRAY_SIZE(smdkv210_i2c_devs1));
+	i2c_register_board_info(2, smdkv210_i2c_devs2,
+			ARRAY_SIZE(smdkv210_i2c_devs2));
+
+	s3c_ide_set_platdata(&smdkv210_ide_pdata);
+
 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
 }
 
 MACHINE_START(SMDKV210, "SMDKV210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.phys_io	= S3C_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= smdkv210_map_io,
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
new file mode 100644
index 000000000000..043c938806b0
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -0,0 +1,131 @@
+/* linux/arch/arm/mach-s5pv210/mach-torbreck.c
+ *
+ * Copyright (c) 2010 aESOP Community
+ *		http://www.aesop.or.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define TORBRECK_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define TORBRECK_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define TORBRECK_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg torbreck_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= TORBRECK_UCON_DEFAULT,
+		.ulcon		= TORBRECK_ULCON_DEFAULT,
+		.ufcon		= TORBRECK_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= TORBRECK_UCON_DEFAULT,
+		.ulcon		= TORBRECK_ULCON_DEFAULT,
+		.ufcon		= TORBRECK_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= TORBRECK_UCON_DEFAULT,
+		.ulcon		= TORBRECK_ULCON_DEFAULT,
+		.ufcon		= TORBRECK_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= TORBRECK_UCON_DEFAULT,
+		.ulcon		= TORBRECK_ULCON_DEFAULT,
+		.ufcon		= TORBRECK_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *torbreck_devices[] __initdata = {
+	&s5pv210_device_iis0,
+	&s3c_device_cfcon,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c2,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+};
+
+static struct i2c_board_info torbreck_i2c_devs0[] __initdata = {
+	/* To Be Updated */
+};
+
+static struct i2c_board_info torbreck_i2c_devs1[] __initdata = {
+	/* To Be Updated */
+};
+
+static struct i2c_board_info torbreck_i2c_devs2[] __initdata = {
+	/* To Be Updated */
+};
+
+static void __init torbreck_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
+}
+
+static void __init torbreck_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_i2c2_set_platdata(NULL);
+	i2c_register_board_info(0, torbreck_i2c_devs0,
+			ARRAY_SIZE(torbreck_i2c_devs0));
+	i2c_register_board_info(1, torbreck_i2c_devs1,
+			ARRAY_SIZE(torbreck_i2c_devs1));
+	i2c_register_board_info(2, torbreck_i2c_devs2,
+			ARRAY_SIZE(torbreck_i2c_devs2));
+
+	platform_add_devices(torbreck_devices, ARRAY_SIZE(torbreck_devices));
+}
+
+MACHINE_START(TORBRECK, "TORBRECK")
+	/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= torbreck_map_io,
+	.init_machine	= torbreck_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
new file mode 100644
index 000000000000..549d7924fd4c
--- /dev/null
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -0,0 +1,166 @@
+/* linux/arch/arm/mach-s5pv210/pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV210 - Power Management support
+ *
+ * Based on arch/arm/mach-s3c2410/pm.c
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/regs-timer.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-clock.h>
+
+static struct sleep_save s5pv210_core_save[] = {
+	/* Clock source */
+	SAVE_ITEM(S5P_CLK_SRC0),
+	SAVE_ITEM(S5P_CLK_SRC1),
+	SAVE_ITEM(S5P_CLK_SRC2),
+	SAVE_ITEM(S5P_CLK_SRC3),
+	SAVE_ITEM(S5P_CLK_SRC4),
+	SAVE_ITEM(S5P_CLK_SRC5),
+	SAVE_ITEM(S5P_CLK_SRC6),
+
+	/* Clock source Mask */
+	SAVE_ITEM(S5P_CLK_SRC_MASK0),
+	SAVE_ITEM(S5P_CLK_SRC_MASK1),
+
+	/* Clock Divider */
+	SAVE_ITEM(S5P_CLK_DIV0),
+	SAVE_ITEM(S5P_CLK_DIV1),
+	SAVE_ITEM(S5P_CLK_DIV2),
+	SAVE_ITEM(S5P_CLK_DIV3),
+	SAVE_ITEM(S5P_CLK_DIV4),
+	SAVE_ITEM(S5P_CLK_DIV5),
+	SAVE_ITEM(S5P_CLK_DIV6),
+	SAVE_ITEM(S5P_CLK_DIV7),
+
+	/* Clock Main Gate */
+	SAVE_ITEM(S5P_CLKGATE_MAIN0),
+	SAVE_ITEM(S5P_CLKGATE_MAIN1),
+	SAVE_ITEM(S5P_CLKGATE_MAIN2),
+
+	/* Clock source Peri Gate */
+	SAVE_ITEM(S5P_CLKGATE_PERI0),
+	SAVE_ITEM(S5P_CLKGATE_PERI1),
+
+	/* Clock source SCLK Gate */
+	SAVE_ITEM(S5P_CLKGATE_SCLK0),
+	SAVE_ITEM(S5P_CLKGATE_SCLK1),
+
+	/* Clock IP Clock gate */
+	SAVE_ITEM(S5P_CLKGATE_IP0),
+	SAVE_ITEM(S5P_CLKGATE_IP1),
+	SAVE_ITEM(S5P_CLKGATE_IP2),
+	SAVE_ITEM(S5P_CLKGATE_IP3),
+	SAVE_ITEM(S5P_CLKGATE_IP4),
+
+	/* Clock Blcok and Bus gate */
+	SAVE_ITEM(S5P_CLKGATE_BLOCK),
+	SAVE_ITEM(S5P_CLKGATE_BUS0),
+
+	/* Clock ETC */
+	SAVE_ITEM(S5P_CLK_OUT),
+	SAVE_ITEM(S5P_MDNIE_SEL),
+
+	/* PWM Register */
+	SAVE_ITEM(S3C2410_TCFG0),
+	SAVE_ITEM(S3C2410_TCFG1),
+	SAVE_ITEM(S3C64XX_TINT_CSTAT),
+	SAVE_ITEM(S3C2410_TCON),
+	SAVE_ITEM(S3C2410_TCNTB(0)),
+	SAVE_ITEM(S3C2410_TCMPB(0)),
+	SAVE_ITEM(S3C2410_TCNTO(0)),
+};
+
+void s5pv210_cpu_suspend(void)
+{
+	unsigned long tmp;
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "wfi" : : "r" (tmp));
+
+	/* we should never get past here */
+	panic("sleep resumed to originator?");
+}
+
+static void s5pv210_pm_prepare(void)
+{
+	unsigned int tmp;
+
+	/* ensure at least INFORM0 has the resume address */
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
+
+	tmp = __raw_readl(S5P_SLEEP_CFG);
+	tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN);
+	__raw_writel(tmp, S5P_SLEEP_CFG);
+
+	/* WFI for SLEEP mode configuration by SYSCON */
+	tmp = __raw_readl(S5P_PWR_CFG);
+	tmp &= S5P_CFG_WFI_CLEAN;
+	tmp |= S5P_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S5P_PWR_CFG);
+
+	/* SYSCON interrupt handling disable */
+	tmp = __raw_readl(S5P_OTHERS);
+	tmp |= S5P_OTHER_SYSC_INTOFF;
+	__raw_writel(tmp, S5P_OTHERS);
+
+	s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
+}
+
+static int s5pv210_pm_add(struct sys_device *sysdev)
+{
+	pm_cpu_prep = s5pv210_pm_prepare;
+	pm_cpu_sleep = s5pv210_cpu_suspend;
+
+	return 0;
+}
+
+static int s5pv210_pm_resume(struct sys_device *dev)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(S5P_OTHERS);
+	tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_CF |\
+		S5P_OTHERS_RET_MMC | S5P_OTHERS_RET_UART);
+	__raw_writel(tmp , S5P_OTHERS);
+
+	s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
+
+	return 0;
+}
+
+static struct sysdev_driver s5pv210_pm_driver = {
+	.add		= s5pv210_pm_add,
+	.resume		= s5pv210_pm_resume,
+};
+
+static __init int s5pv210_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver);
+}
+arch_initcall(s5pv210_pm_drvinit);
diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
index a50cbac8720d..e932ebfac56d 100644
--- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c
+++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c
@@ -13,41 +13,29 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/fb.h>
+#include <linux/gpio.h>
 
 #include <mach/regs-fb.h>
-#include <mach/gpio.h>
 #include <mach/map.h>
 #include <plat/fb.h>
 #include <mach/regs-clock.h>
 #include <plat/gpio-cfg.h>
 
-void s5pv210_fb_gpio_setup_24bpp(void)
+static void s5pv210_fb_cfg_gpios(unsigned int base, unsigned int nr)
 {
-	unsigned int gpio = 0;
-
-	for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
+	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
 
-	for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
+	for (; nr > 0; nr--, base++)
+		s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
+}
 
-	for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
 
-	for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
+void s5pv210_fb_gpio_setup_24bpp(void)
+{
+	s5pv210_fb_cfg_gpios(S5PV210_GPF0(0), 8);
+	s5pv210_fb_cfg_gpios(S5PV210_GPF1(0), 8);
+	s5pv210_fb_cfg_gpios(S5PV210_GPF2(0), 8);
+	s5pv210_fb_cfg_gpios(S5PV210_GPF3(0), 4);
 
 	/* Set DISPLAY_CONTROL register for Display path selection.
 	 *
diff --git a/arch/arm/mach-s5pv210/setup-i2c0.c b/arch/arm/mach-s5pv210/setup-i2c0.c
index c718253c70b8..0f1cc3a1c1e8 100644
--- a/arch/arm/mach-s5pv210/setup-i2c0.c
+++ b/arch/arm/mach-s5pv210/setup-i2c0.c
@@ -14,17 +14,15 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5PV210_GPD1(0), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/mach-s5pv210/setup-i2c1.c b/arch/arm/mach-s5pv210/setup-i2c1.c
index 45e0e6ed2ed0..f61365a34c56 100644
--- a/arch/arm/mach-s5pv210/setup-i2c1.c
+++ b/arch/arm/mach-s5pv210/setup-i2c1.c
@@ -14,17 +14,15 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5PV210_GPD1(2), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/mach-s5pv210/setup-i2c2.c b/arch/arm/mach-s5pv210/setup-i2c2.c
index b11b4bff69ac..2f91b5cefbc6 100644
--- a/arch/arm/mach-s5pv210/setup-i2c2.c
+++ b/arch/arm/mach-s5pv210/setup-i2c2.c
@@ -14,17 +14,15 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 
 struct platform_device; /* don't need the contents */
 
-#include <mach/gpio.h>
 #include <plat/iic.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c2_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5PV210_GPD1(4), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/mach-s5pv210/setup-ide.c b/arch/arm/mach-s5pv210/setup-ide.c
new file mode 100644
index 000000000000..ea123d546bd2
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-ide.c
@@ -0,0 +1,39 @@
+/* linux/arch/arm/mach-s5pv210/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV210 setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+
+static void s5pv210_ide_cfg_gpios(unsigned int base, unsigned int nr)
+{
+	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
+
+	for (; nr > 0; nr--, base++)
+		s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
+}
+
+void s5pv210_ide_setup_gpio(void)
+{
+	/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
+	s5pv210_ide_cfg_gpios(S5PV210_GPJ0(0), 8);
+
+	/* CF_Data[0 - 7] */
+	s5pv210_ide_cfg_gpios(S5PV210_GPJ2(0), 8);
+
+	/* CF_Data[8 - 15] */
+	s5pv210_ide_cfg_gpios(S5PV210_GPJ3(0), 8);
+
+	/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
+	s5pv210_ide_cfg_gpios(S5PV210_GPJ4(0), 4);
+}
diff --git a/arch/arm/mach-s5pv210/setup-keypad.c b/arch/arm/mach-s5pv210/setup-keypad.c
new file mode 100644
index 000000000000..c56420a52f48
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-keypad.c
@@ -0,0 +1,24 @@
+/*
+ * linux/arch/arm/mach-s5pv210/setup-keypad.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+	/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
+	s3c_gpio_cfgrange_nopull(S5PV210_GPH3(0), rows, S3C_GPIO_SFN(3));
+
+	/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
+	s3c_gpio_cfgrange_nopull(S5PV210_GPH2(0), cols, S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
index fe7d86dad14c..746777d56df9 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -15,90 +15,90 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 
-#include <mach/gpio.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
 
 void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 {
-	unsigned int gpio;
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 
 	/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
-	for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PV210_GPG0(0), 2, S3C_GPIO_SFN(2));
+
 	switch (width) {
 	case 8:
 		/* GPG1[3:6] special-funtion 3 */
-		for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		}
+		s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3));
 	case 4:
 		/* GPG0[3:6] special-funtion 2 */
-		for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) {
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		}
+		s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2));
 	default:
 		break;
 	}
 
-	s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+	}
 }
 
 void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 {
-	unsigned int gpio;
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 
 	/* Set all the necessary GPG1[0:1] pins to special-function 2 */
-	for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PV210_GPG1(0), 2, S3C_GPIO_SFN(2));
 
 	/* Data pin GPG1[3:6] to special-function 2 */
-	for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(2));
 
-	s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+	}
 }
 
 void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
 {
-	unsigned int gpio;
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
 
 	/* Set all the necessary GPG2[0:1] pins to special-function 2 */
-	for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PV210_GPG2(0), 2, S3C_GPIO_SFN(2));
 
 	switch (width) {
 	case 8:
 		/* Data pin GPG3[3:6] to special-function 3 */
-		for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		}
+		s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(3));
 	case 4:
 		/* Data pin GPG2[3:6] to special-function 2 */
-		for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) {
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		}
+		s3c_gpio_cfgrange_nopull(S5PV210_GPG2(3), 4, S3C_GPIO_SFN(2));
 	default:
 		break;
 	}
 
-	s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+	}
+}
+
+void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
+{
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+	/* Set all the necessary GPG3[0:1] pins to special-function 2 */
+	s3c_gpio_cfgrange_nopull(S5PV210_GPG3(0), 2, S3C_GPIO_SFN(2));
+
+	/* Data pin GPG3[3:6] to special-function 2 */
+	s3c_gpio_cfgrange_nopull(S5PV210_GPG3(3), 4, S3C_GPIO_SFN(2));
+
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2));
+	}
 }
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
index 51815ec60c2a..c32e202731c1 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -26,9 +26,9 @@
 
 char *s5pv210_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",		/* HCLK */
-	[1] = "hsmmc",		/* HCLK */
+	/* [1] = "hsmmc",	- duplicate HCLK entry */
 	[2] = "sclk_mmc",	/* mmc_bus */
-	/*[4] = reserved */
+	/* [3] = NULL,		- reserved */
 };
 
 void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
new file mode 100644
index 000000000000..d4d222b716b4
--- /dev/null
+++ b/arch/arm/mach-s5pv210/sleep.S
@@ -0,0 +1,170 @@
+/* linux/arch/arm/plat-s5p/sleep.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV210 power Manager (Suspend-To-RAM) support
+ * Based on S3C2410 sleep code by:
+ * 	Ben Dooks, (c) 2004 Simtec Electronics
+ *
+ * Based on PXA/SA1100 sleep code by:
+ *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ *	Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/memory.h>
+
+	.text
+
+	/* s3c_cpu_save
+	 *
+	 * entry:
+	 *	r0 = save address (virtual addr of s3c_sleep_save_phys)
+	*/
+
+ENTRY(s3c_cpu_save)
+
+	stmfd	sp!, { r3 - r12, lr }
+
+	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
+	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
+	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
+	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
+	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
+	mrc	p15, 0, r9, c1, c0, 0	@ Control register
+	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
+	mrc	p15, 0, r12, c10, c2, 0	@ Read PRRR
+	mrc	p15, 0, r3, c10, c2, 1	@ READ NMRR
+
+	stmia	r0, { r3 - r13 }
+
+	bl	s3c_pm_cb_flushcache
+
+	ldr	r0, =pm_cpu_sleep
+	ldr	r0, [ r0 ]
+	mov	pc, r0
+
+resume_with_mmu:
+	/*
+	 * After MMU is turned on, restore the previous MMU table.
+	 */
+	ldr	r9 , =(PAGE_OFFSET - PHYS_OFFSET)
+	add	r4, r4, r9
+	str	r12, [r4]
+
+	ldmfd	sp!, { r3 - r12, pc }
+
+	.ltorg
+
+	.data
+
+	.global	s3c_sleep_save_phys
+s3c_sleep_save_phys:
+	.word	0
+
+	/* sleep magic, to allow the bootloader to check for an valid
+	 * image to resume to. Must be the first word before the
+	 * s3c_cpu_resume entry.
+	*/
+
+	.word	0x2bedf00d
+
+	/* s3c_cpu_resume
+	 *
+	 * resume code entry for bootloader to call
+	 *
+	 * we must put this code here in the data segment as we have no
+	 * other way of restoring the stack pointer after sleep, and we
+	 * must not write to the code segment (code is read-only)
+	*/
+
+ENTRY(s3c_cpu_resume)
+	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+	msr	cpsr_c, r0
+
+	mov	r1, #0
+	mcr	p15, 0, r1, c8, c7, 0		@ invalidate TLBs
+	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I Cache
+
+	ldr	r0, s3c_sleep_save_phys		@ address of restore block
+	ldmia	r0, { r3 - r13 }
+
+	mcr	p15, 0, r4, c13, c0, 0		@ FCSE/PID
+	mcr	p15, 0, r5, c3, c0, 0		@ Domain ID
+
+	mcr	p15, 0, r8, c2, c0, 2		@ Translation Table Control
+	mcr	p15, 0, r7, c2, c0, 1		@ Translation Table BASE1
+	mcr	p15, 0, r6, c2, c0, 0		@ Translation Table BASE0
+
+	mcr	p15, 0, r10, c1, c0, 1		@ Auxiliary control register
+
+	mov	r0, #0
+	mcr	p15, 0, r0, c8, c7, 0		@ Invalidate I & D TLB
+
+	mov	r0, #0				@ restore copro access
+	mcr	p15, 0, r11, c1, c0, 2		@ Co-processor access
+	mcr 	p15, 0, r0, c7, c5, 4
+
+	mcr	p15, 0, r12, c10, c2, 0		@ write PRRR
+	mcr	p15, 0, r3, c10, c2, 1		@ write NMRR
+
+	/*
+	 * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
+	 * And there are no valid entries in the MMU table at this point.
+	 * So before turning on the MMU, the MMU entry for the DRAM address
+	 * range is added. After the MMU is turned on, the other entries
+	 * in the MMU table will be restored.
+	*/
+
+	/* r6 = Translation Table BASE0 */
+	mov	r4, r6
+	mov	r4, r4, LSR #14
+	mov	r4, r4, LSL #14
+
+	/* Load address for adding to MMU table list */
+	ldr	r11, =0xE010F000		@ INFORM0 reg.
+	ldr	r10, [r11, #0]
+	mov	r10, r10, LSR #18
+	bic	r10, r10, #0x3
+	orr	r4, r4, r10
+
+	/* Calculate MMU table entry */
+	mov 	r10, r10, LSL #18
+	ldr	r5, =0x40E
+	orr	r10, r10, r5
+
+	/* Back up originally data */
+	ldr	r12, [r4]
+
+	/* Add calculated MMU table entry into MMU table list */
+	str	r10, [r4]
+
+	ldr	r2, =resume_with_mmu
+	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc
+
+	nop
+	nop
+	nop
+	nop
+	nop					@ second-to-last before mmu
+
+	mov	pc, r2				@ go back to virtual address
+
+	.ltorg
diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig
new file mode 100644
index 000000000000..1150b360f38c
--- /dev/null
+++ b/arch/arm/mach-s5pv310/Kconfig
@@ -0,0 +1,128 @@
+# arch/arm/mach-s5pv310/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PV310
+
+if ARCH_S5PV310
+
+config CPU_S5PV310
+	bool
+	help
+	  Enable S5PV310 CPU support
+
+config S5PV310_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S5PV310_SETUP_I2C2
+	bool
+	help
+	  Common setup code for i2c bus 2.
+
+config S5PV310_SETUP_I2C3
+	bool
+	help
+	  Common setup code for i2c bus 3.
+
+config S5PV310_SETUP_I2C4
+	bool
+	help
+	  Common setup code for i2c bus 4.
+
+config S5PV310_SETUP_I2C5
+	bool
+	help
+	  Common setup code for i2c bus 5.
+
+config S5PV310_SETUP_I2C6
+	bool
+	help
+	  Common setup code for i2c bus 6.
+
+config S5PV310_SETUP_I2C7
+	bool
+	help
+	  Common setup code for i2c bus 7.
+
+config S5PV310_SETUP_SDHCI
+	bool
+	select S5PV310_SETUP_SDHCI_GPIO
+	help
+	  Internal helper functions for S5PV310 based SDHCI systems.
+
+config S5PV310_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
+# machine support
+
+menu "S5PC210 Machines"
+
+config MACH_SMDKC210
+	bool "SMDKC210"
+	select CPU_S5PV310
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S5PV310_SETUP_SDHCI
+	help
+	  Machine support for Samsung SMDKC210
+	  S5PC210(MCP) is one of package option of S5PV310
+
+config MACH_UNIVERSAL_C210
+	bool "Mobile UNIVERSAL_C210 Board"
+	select CPU_S5PV310
+	select S5P_DEV_ONENAND
+	select S3C_DEV_I2C1
+	select S5PV310_SETUP_I2C1
+	help
+	  Machine support for Samsung Mobile Universal S5PC210 Reference
+	  Board. S5PC210(MCP) is one of package option of S5PV310
+
+endmenu
+
+menu "S5PV310 Machines"
+
+config MACH_SMDKV310
+	bool "SMDKV310"
+	select CPU_S5PV310
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S5PV310_SETUP_SDHCI
+	help
+	  Machine support for Samsung SMDKV310
+
+endmenu
+
+comment "Configuration for HSMMC bus width"
+
+menu "Use 8-bit bus width"
+
+config S5PV310_SDHCI_CH0_8BIT
+	bool "Channel 0 with 8-bit bus"
+	help
+	  Support HSMMC Channel 0 8-bit bus.
+	  If selected, Channel 1 is disabled.
+
+config S5PV310_SDHCI_CH2_8BIT
+	bool "Channel 2 with 8-bit bus"
+	help
+	  Support HSMMC Channel 2 8-bit bus.
+	  If selected, Channel 3 is disabled.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile
new file mode 100644
index 000000000000..84afc64e7c01
--- /dev/null
+++ b/arch/arm/mach-s5pv310/Makefile
@@ -0,0 +1,38 @@
+# arch/arm/mach-s5pv310/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5PV310 system
+
+obj-$(CONFIG_CPU_S5PV310)	+= cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_CPU_S5PV310)	+= setup-i2c0.o time.o gpiolib.o irq-eint.o
+
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDKC210)	+= mach-smdkc210.o
+obj-$(CONFIG_MACH_SMDKV310)	+= mach-smdkv310.o
+obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
+
+# device support
+
+obj-$(CONFIG_S5PV310_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5PV310_SETUP_I2C2)	+= setup-i2c2.o
+obj-$(CONFIG_S5PV310_SETUP_I2C3)	+= setup-i2c3.o
+obj-$(CONFIG_S5PV310_SETUP_I2C4)	+= setup-i2c4.o
+obj-$(CONFIG_S5PV310_SETUP_I2C5)	+= setup-i2c5.o
+obj-$(CONFIG_S5PV310_SETUP_I2C6)	+= setup-i2c6.o
+obj-$(CONFIG_S5PV310_SETUP_I2C7)	+= setup-i2c7.o
+obj-$(CONFIG_S5PV310_SETUP_SDHCI)	+= setup-sdhci.o
+obj-$(CONFIG_S5PV310_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5pv310/Makefile.boot b/arch/arm/mach-s5pv310/Makefile.boot
new file mode 100644
index 000000000000..d65956ffb43d
--- /dev/null
+++ b/arch/arm/mach-s5pv310/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x40008000
+params_phys-y	:= 0x40000100
diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-s5pv310/clock.c
new file mode 100644
index 000000000000..58c9d33f36fe
--- /dev/null
+++ b/arch/arm/mach-s5pv310/clock.c
@@ -0,0 +1,1089 @@
+/* linux/arch/arm/mach-s5pv310/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+static struct clk clk_sclk_hdmi27m = {
+	.name		= "sclk_hdmi27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static struct clk clk_sclk_hdmiphy = {
+	.name		= "sclk_hdmiphy",
+	.id		= -1,
+};
+
+static struct clk clk_sclk_usbphy0 = {
+	.name		= "sclk_usbphy0",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static struct clk clk_sclk_usbphy1 = {
+	.name		= "sclk_usbphy1",
+	.id		= -1,
+};
+
+static int s5pv310_clksrc_mask_top_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable);
+}
+
+static int s5pv310_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable);
+}
+
+static int s5pv310_clk_ip_cam_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
+}
+
+static int s5pv310_clk_ip_image_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable);
+}
+
+static int s5pv310_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
+}
+
+static int s5pv310_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
+}
+
+static int s5pv310_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
+}
+
+static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
+}
+
+static int s5pv310_clk_ip_perir_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
+}
+
+/* Core list of CMU_CPU side */
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_apll = {
+	.clk	= {
+		.name		= "sclk_apll",
+		.id		= -1,
+		.parent		= &clk_mout_apll.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+};
+
+static struct clk *clkset_moutcore_list[] = {
+	[0] = &clk_mout_apll.clk,
+	[1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_moutcore = {
+	.sources	= clkset_moutcore_list,
+	.nr_sources	= ARRAY_SIZE(clkset_moutcore_list),
+};
+
+static struct clksrc_clk clk_moutcore = {
+	.clk	= {
+		.name		= "moutcore",
+		.id		= -1,
+	},
+	.sources	= &clkset_moutcore,
+	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk clk_coreclk = {
+	.clk	= {
+		.name		= "core_clk",
+		.id		= -1,
+		.parent		= &clk_moutcore.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_armclk = {
+	.clk	= {
+		.name		= "armclk",
+		.id		= -1,
+		.parent		= &clk_coreclk.clk,
+	},
+};
+
+static struct clksrc_clk clk_aclk_corem0 = {
+	.clk	= {
+		.name		= "aclk_corem0",
+		.id		= -1,
+		.parent		= &clk_coreclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_cores = {
+	.clk	= {
+		.name		= "aclk_cores",
+		.id		= -1,
+		.parent		= &clk_coreclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_corem1 = {
+	.clk	= {
+		.name		= "aclk_corem1",
+		.id		= -1,
+		.parent		= &clk_coreclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_periphclk = {
+	.clk	= {
+		.name		= "periphclk",
+		.id		= -1,
+		.parent		= &clk_coreclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 },
+};
+
+/* Core list of CMU_CORE side */
+
+static struct clk *clkset_corebus_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources clkset_mout_corebus = {
+	.sources	= clkset_corebus_list,
+	.nr_sources	= ARRAY_SIZE(clkset_corebus_list),
+};
+
+static struct clksrc_clk clk_mout_corebus = {
+	.clk	= {
+		.name		= "mout_corebus",
+		.id		= -1,
+	},
+	.sources	= &clkset_mout_corebus,
+	.reg_src	= { .reg = S5P_CLKSRC_CORE, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_sclk_dmc = {
+	.clk	= {
+		.name		= "sclk_dmc",
+		.id		= -1,
+		.parent		= &clk_mout_corebus.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_cored = {
+	.clk	= {
+		.name		= "aclk_cored",
+		.id		= -1,
+		.parent		= &clk_sclk_dmc.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_corep = {
+	.clk	= {
+		.name		= "aclk_corep",
+		.id		= -1,
+		.parent		= &clk_aclk_cored.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_acp = {
+	.clk	= {
+		.name		= "aclk_acp",
+		.id		= -1,
+		.parent		= &clk_mout_corebus.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_pclk_acp = {
+	.clk	= {
+		.name		= "pclk_acp",
+		.id		= -1,
+		.parent		= &clk_aclk_acp.clk,
+	},
+	.reg_div	= { .reg = S5P_CLKDIV_CORE0, .shift = 4, .size = 3 },
+};
+
+/* Core list of CMU_TOP side */
+
+static struct clk *clkset_aclk_top_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources clkset_aclk = {
+	.sources	= clkset_aclk_top_list,
+	.nr_sources	= ARRAY_SIZE(clkset_aclk_top_list),
+};
+
+static struct clksrc_clk clk_aclk_200 = {
+	.clk	= {
+		.name		= "aclk_200",
+		.id		= -1,
+	},
+	.sources	= &clkset_aclk,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 },
+	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_100 = {
+	.clk	= {
+		.name		= "aclk_100",
+		.id		= -1,
+	},
+	.sources	= &clkset_aclk,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 },
+	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_aclk_160 = {
+	.clk	= {
+		.name		= "aclk_160",
+		.id		= -1,
+	},
+	.sources	= &clkset_aclk,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 },
+	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_aclk_133 = {
+	.clk	= {
+		.name		= "aclk_133",
+		.id		= -1,
+	},
+	.sources	= &clkset_aclk,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 },
+	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 },
+};
+
+static struct clk *clkset_vpllsrc_list[] = {
+	[0] = &clk_fin_vpll,
+	[1] = &clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources clkset_vpllsrc = {
+	.sources	= clkset_vpllsrc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk clk_vpllsrc = {
+	.clk	= {
+		.name		= "vpll_src",
+		.id		= -1,
+		.enable		= s5pv310_clksrc_mask_top_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources	= &clkset_vpllsrc,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_sclk_vpll_list[] = {
+	[0] = &clk_vpllsrc.clk,
+	[1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources clkset_sclk_vpll = {
+	.sources	= clkset_sclk_vpll_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk clk_sclk_vpll = {
+	.clk	= {
+		.name		= "sclk_vpll",
+		.id		= -1,
+	},
+	.sources	= &clkset_sclk_vpll,
+	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 },
+};
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_aclk_100.clk,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1<<24),
+	}, {
+		.name		= "csis",
+		.id		= 0,
+		.enable		= s5pv310_clk_ip_cam_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "csis",
+		.id		= 1,
+		.enable		= s5pv310_clk_ip_cam_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.enable		= s5pv310_clk_ip_cam_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.enable		= s5pv310_clk_ip_cam_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.enable		= s5pv310_clk_ip_cam_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "fimc",
+		.id		= 3,
+		.enable		= s5pv310_clk_ip_cam_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "fimd",
+		.id		= 0,
+		.enable		= s5pv310_clk_ip_lcd0_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "fimd",
+		.id		= 1,
+		.enable		= s5pv310_clk_ip_lcd1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= s5pv310_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= s5pv310_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= s5pv310_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "hsmmc",
+		.id		= 3,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= s5pv310_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "hsmmc",
+		.id		= 4,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= s5pv310_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "sata",
+		.id		= -1,
+		.enable		= s5pv310_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 15),
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.enable		= s5pv310_clk_ip_perir_ctrl,
+		.ctrlbit	= (1 << 15),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.enable		= s5pv310_clk_ip_perir_ctrl,
+		.ctrlbit	= (1 << 14),
+	}, {
+		.name		= "usbhost",
+		.id		= -1,
+		.enable		= s5pv310_clk_ip_fsys_ctrl ,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.enable		= s5pv310_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 13),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 16),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 17),
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 18),
+	}, {
+		.name		= "fimg2d",
+		.id		= -1,
+		.enable		= s5pv310_clk_ip_image_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "i2c",
+		.id		= 0,
+		.parent		= &clk_aclk_100.clk,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "i2c",
+		.id		= 1,
+		.parent		= &clk_aclk_100.clk,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "i2c",
+		.id		= 2,
+		.parent		= &clk_aclk_100.clk,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "i2c",
+		.id		= 3,
+		.parent		= &clk_aclk_100.clk,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "i2c",
+		.id		= 4,
+		.parent		= &clk_aclk_100.clk,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "i2c",
+		.id		= 5,
+		.parent		= &clk_aclk_100.clk,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 11),
+	}, {
+		.name		= "i2c",
+		.id		= 6,
+		.parent		= &clk_aclk_100.clk,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "i2c",
+		.id		= 7,
+		.parent		= &clk_aclk_100.clk,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 13),
+	},
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "uart",
+		.id		= 0,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "uart",
+		.id		= 4,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "uart",
+		.id		= 5,
+		.enable		= s5pv310_clk_ip_peril_ctrl,
+		.ctrlbit	= (1 << 5),
+	}
+};
+
+static struct clk *clkset_group_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &clk_xusbxti,
+	[2] = &clk_sclk_hdmi27m,
+	[3] = &clk_sclk_usbphy0,
+	[4] = &clk_sclk_usbphy1,
+	[5] = &clk_sclk_hdmiphy,
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+	[8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_group = {
+	.sources	= clkset_group_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group_list),
+};
+
+static struct clk *clkset_mout_g2d0_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d0 = {
+	.sources	= clkset_mout_g2d0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mout_g2d0_list),
+};
+
+static struct clksrc_clk clk_mout_g2d0 = {
+	.clk	= {
+		.name		= "mout_g2d0",
+		.id		= -1,
+	},
+	.sources	= &clkset_mout_g2d0,
+	.reg_src	= { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 },
+};
+
+static struct clk *clkset_mout_g2d1_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d1 = {
+	.sources	= clkset_mout_g2d1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mout_g2d1_list),
+};
+
+static struct clksrc_clk clk_mout_g2d1 = {
+	.clk	= {
+		.name		= "mout_g2d1",
+		.id		= -1,
+	},
+	.sources	= &clkset_mout_g2d1,
+	.reg_src	= { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_mout_g2d_list[] = {
+	[0] = &clk_mout_g2d0.clk,
+	[1] = &clk_mout_g2d1.clk,
+};
+
+static struct clksrc_sources clkset_mout_g2d = {
+	.sources	= clkset_mout_g2d_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mout_g2d_list),
+};
+
+static struct clksrc_clk clk_dout_mmc0 = {
+	.clk		= {
+		.name		= "dout_mmc0",
+		.id		= -1,
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc1 = {
+	.clk		= {
+		.name		= "dout_mmc1",
+		.id		= -1,
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc2 = {
+	.clk		= {
+		.name		= "dout_mmc2",
+		.id		= -1,
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc3 = {
+	.clk		= {
+		.name		= "dout_mmc3",
+		.id		= -1,
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_dout_mmc4 = {
+	.clk		= {
+		.name		= "dout_mmc4",
+		.id		= -1,
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "uclk1",
+			.id		= 0,
+			.enable		= s5pv310_clksrc_mask_peril0_ctrl,
+			.ctrlbit	= (1 << 0),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 1,
+			.enable		= s5pv310_clksrc_mask_peril0_ctrl,
+			.ctrlbit	= (1 << 4),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 2,
+			.enable		= s5pv310_clksrc_mask_peril0_ctrl,
+			.ctrlbit	= (1 << 8),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 3,
+			.enable		= s5pv310_clksrc_mask_peril0_ctrl,
+			.ctrlbit	= (1 << 12),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_pwm",
+			.id		= -1,
+			.enable		= s5pv310_clksrc_mask_peril0_ctrl,
+			.ctrlbit	= (1 << 24),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_csis",
+			.id		= 0,
+			.enable		= s5pv310_clksrc_mask_cam_ctrl,
+			.ctrlbit	= (1 << 24),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_csis",
+			.id		= 1,
+			.enable		= s5pv310_clksrc_mask_cam_ctrl,
+			.ctrlbit	= (1 << 28),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_cam",
+			.id		= 0,
+			.enable		= s5pv310_clksrc_mask_cam_ctrl,
+			.ctrlbit	= (1 << 16),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_cam",
+			.id		= 1,
+			.enable		= s5pv310_clksrc_mask_cam_ctrl,
+			.ctrlbit	= (1 << 20),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimc",
+			.id		= 0,
+			.enable		= s5pv310_clksrc_mask_cam_ctrl,
+			.ctrlbit	= (1 << 0),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimc",
+			.id		= 1,
+			.enable		= s5pv310_clksrc_mask_cam_ctrl,
+			.ctrlbit	= (1 << 4),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimc",
+			.id		= 2,
+			.enable		= s5pv310_clksrc_mask_cam_ctrl,
+			.ctrlbit	= (1 << 8),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimc",
+			.id		= 3,
+			.enable		= s5pv310_clksrc_mask_cam_ctrl,
+			.ctrlbit	= (1 << 12),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimd",
+			.id		= 0,
+			.enable		= s5pv310_clksrc_mask_lcd0_ctrl,
+			.ctrlbit	= (1 << 0),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimd",
+			.id		= 1,
+			.enable		= s5pv310_clksrc_mask_lcd1_ctrl,
+			.ctrlbit	= (1 << 0),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_sata",
+			.id		= -1,
+			.enable		= s5pv310_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 24),
+		},
+		.sources = &clkset_mout_corebus,
+		.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+		.reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_spi",
+			.id		= 0,
+			.enable		= s5pv310_clksrc_mask_peril1_ctrl,
+			.ctrlbit	= (1 << 16),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_spi",
+			.id		= 1,
+			.enable		= s5pv310_clksrc_mask_peril1_ctrl,
+			.ctrlbit	= (1 << 20),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_spi",
+			.id		= 2,
+			.enable		= s5pv310_clksrc_mask_peril1_ctrl,
+			.ctrlbit	= (1 << 24),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimg2d",
+			.id		= -1,
+		},
+		.sources = &clkset_mout_g2d,
+		.reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 },
+		.reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 0,
+			.parent		= &clk_dout_mmc0.clk,
+			.enable		= s5pv310_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 0),
+		},
+		.reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 1,
+			.parent         = &clk_dout_mmc1.clk,
+			.enable		= s5pv310_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 4),
+		},
+		.reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 2,
+			.parent         = &clk_dout_mmc2.clk,
+			.enable		= s5pv310_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 8),
+		},
+		.reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 3,
+			.parent         = &clk_dout_mmc3.clk,
+			.enable		= s5pv310_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 12),
+		},
+		.reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 4,
+			.parent         = &clk_dout_mmc4.clk,
+			.enable		= s5pv310_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 16),
+		},
+		.reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 },
+	}
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_sclk_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_moutcore,
+	&clk_coreclk,
+	&clk_armclk,
+	&clk_aclk_corem0,
+	&clk_aclk_cores,
+	&clk_aclk_corem1,
+	&clk_periphclk,
+	&clk_mout_corebus,
+	&clk_sclk_dmc,
+	&clk_aclk_cored,
+	&clk_aclk_corep,
+	&clk_aclk_acp,
+	&clk_pclk_acp,
+	&clk_vpllsrc,
+	&clk_sclk_vpll,
+	&clk_aclk_200,
+	&clk_aclk_100,
+	&clk_aclk_160,
+	&clk_aclk_133,
+	&clk_dout_mmc0,
+	&clk_dout_mmc1,
+	&clk_dout_mmc2,
+	&clk_dout_mmc3,
+	&clk_dout_mmc4,
+};
+
+void __init_or_cpufreq s5pv310_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned long vpll;
+	unsigned long vpllsrc;
+	unsigned long xtal;
+	unsigned long armclk;
+	unsigned long sclk_dmc;
+	unsigned long aclk_200;
+	unsigned long aclk_100;
+	unsigned long aclk_160;
+	unsigned long aclk_133;
+	unsigned int ptr;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
+	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
+	epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+				__raw_readl(S5P_EPLL_CON1), pll_4600);
+
+	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+	vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+				__raw_readl(S5P_VPLL_CON1), pll_4650);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_vpll.rate = vpll;
+
+	printk(KERN_INFO "S5PV310: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
+			apll, mpll, epll, vpll);
+
+	armclk = clk_get_rate(&clk_armclk.clk);
+	sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk);
+
+	aclk_200 = clk_get_rate(&clk_aclk_200.clk);
+	aclk_100 = clk_get_rate(&clk_aclk_100.clk);
+	aclk_160 = clk_get_rate(&clk_aclk_160.clk);
+	aclk_133 = clk_get_rate(&clk_aclk_133.clk);
+
+	printk(KERN_INFO "S5PV310: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
+			 "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
+			armclk, sclk_dmc, aclk_200,
+			aclk_100, aclk_160, aclk_133);
+
+	clk_f.rate = armclk;
+	clk_h.rate = sclk_dmc;
+	clk_p.rate = aclk_100;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+	/* Nothing here yet */
+};
+
+void __init s5pv310_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+	if (ret > 0)
+		printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c
new file mode 100644
index 000000000000..82ce4aa6d61a
--- /dev/null
+++ b/arch/arm/mach-s5pv310/cpu.c
@@ -0,0 +1,187 @@
+/* linux/arch/arm/mach-s5pv310/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sched.h>
+#include <linux/sysdev.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/s5pv310.h>
+#include <plat/sdhci.h>
+
+#include <mach/regs-irq.h>
+
+void __iomem *gic_cpu_base_addr;
+
+extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
+			 unsigned int irq_start);
+extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
+
+/* Initial IO mappings */
+static struct map_desc s5pv310_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(S5PV310_PA_SYSRAM),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_CMU,
+		.pfn		= __phys_to_pfn(S5PV310_PA_CMU),
+		.length		= SZ_128K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
+		.pfn		= __phys_to_pfn(S5PV310_PA_COMBINER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
+		.pfn		= __phys_to_pfn(S5PV310_PA_COREPERI),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_L2CC,
+		.pfn		= __phys_to_pfn(S5PV310_PA_L2CC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO1,
+		.pfn		= __phys_to_pfn(S5PV310_PA_GPIO1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO2,
+		.pfn		= __phys_to_pfn(S5PV310_PA_GPIO2),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO3,
+		.pfn		= __phys_to_pfn(S5PV310_PA_GPIO3),
+		.length		= SZ_256,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(S5PV310_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void s5pv310_idle(void)
+{
+	if (!need_resched())
+		cpu_do_idle();
+
+	local_irq_enable();
+}
+
+/* s5pv310_map_io
+ *
+ * register the standard cpu IO areas
+*/
+void __init s5pv310_map_io(void)
+{
+	iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc));
+
+	/* initialize device information early */
+	s5pv310_default_sdhci0();
+	s5pv310_default_sdhci1();
+	s5pv310_default_sdhci2();
+	s5pv310_default_sdhci3();
+}
+
+void __init s5pv310_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+	s5pv310_register_clocks();
+	s5pv310_setup_clocks();
+}
+
+void __init s5pv310_init_irq(void)
+{
+	int irq;
+
+	gic_cpu_base_addr = S5P_VA_GIC_CPU;
+	gic_dist_init(0, S5P_VA_GIC_DIST, IRQ_LOCALTIMER);
+	gic_cpu_init(0, S5P_VA_GIC_CPU);
+
+	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+				COMBINER_IRQ(irq, 0));
+		combiner_cascade_irq(irq, IRQ_SPI(irq));
+	}
+
+	/* The parameters of s5p_init_irq() are for VIC init.
+	 * Theses parameters should be NULL and 0 because S5PV310
+	 * uses GIC instead of VIC.
+	 */
+	s5p_init_irq(NULL, 0);
+}
+
+struct sysdev_class s5pv310_sysclass = {
+	.name	= "s5pv310-core",
+};
+
+static struct sys_device s5pv310_sysdev = {
+	.cls	= &s5pv310_sysclass,
+};
+
+static int __init s5pv310_core_init(void)
+{
+	return sysdev_class_register(&s5pv310_sysclass);
+}
+
+core_initcall(s5pv310_core_init);
+
+#ifdef CONFIG_CACHE_L2X0
+static int __init s5pv310_l2x0_cache_init(void)
+{
+	/* TAG, Data Latency Control: 2cycle */
+	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+	__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+	/* L2X0 Prefetch Control */
+	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+	/* L2X0 Power Control */
+	__raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
+		     S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+	l2x0_init(S5P_VA_L2CC, 0x7C070001, 0xC200ffff);
+
+	return 0;
+}
+
+early_initcall(s5pv310_l2x0_cache_init);
+#endif
+
+int __init s5pv310_init(void)
+{
+	printk(KERN_INFO "S5PV310: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = s5pv310_idle;
+
+	return sysdev_register(&s5pv310_sysdev);
+}
diff --git a/arch/arm/mach-s5pv310/gpiolib.c b/arch/arm/mach-s5pv310/gpiolib.c
new file mode 100644
index 000000000000..55217b8923ec
--- /dev/null
+++ b/arch/arm/mach-s5pv310/gpiolib.c
@@ -0,0 +1,304 @@
+/* linux/arch/arm/mach-s5pv310/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+/*
+ * Following are the gpio banks in v310.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip s5pv310_gpio_part1_4bit[] = {
+	{
+		.chip	= {
+			.base	= S5PV310_GPA0(0),
+			.ngpio	= S5PV310_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPA1(0),
+			.ngpio	= S5PV310_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPB(0),
+			.ngpio	= S5PV310_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPC0(0),
+			.ngpio	= S5PV310_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPC1(0),
+			.ngpio	= S5PV310_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPD0(0),
+			.ngpio	= S5PV310_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPD1(0),
+			.ngpio	= S5PV310_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPE0(0),
+			.ngpio	= S5PV310_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPE1(0),
+			.ngpio	= S5PV310_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPE2(0),
+			.ngpio	= S5PV310_GPIO_E2_NR,
+			.label	= "GPE2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPE3(0),
+			.ngpio	= S5PV310_GPIO_E3_NR,
+			.label	= "GPE3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPE4(0),
+			.ngpio	= S5PV310_GPIO_E4_NR,
+			.label	= "GPE4",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPF0(0),
+			.ngpio	= S5PV310_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPF1(0),
+			.ngpio	= S5PV310_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPF2(0),
+			.ngpio	= S5PV310_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPF3(0),
+			.ngpio	= S5PV310_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[] = {
+	{
+		.chip	= {
+			.base	= S5PV310_GPJ0(0),
+			.ngpio	= S5PV310_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPJ1(0),
+			.ngpio	= S5PV310_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPK0(0),
+			.ngpio	= S5PV310_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPK1(0),
+			.ngpio	= S5PV310_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPK2(0),
+			.ngpio	= S5PV310_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPK3(0),
+			.ngpio	= S5PV310_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPL0(0),
+			.ngpio	= S5PV310_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPL1(0),
+			.ngpio	= S5PV310_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPL2(0),
+			.ngpio	= S5PV310_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC00),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= S5PV310_GPX0(0),
+			.ngpio	= S5PV310_GPIO_X0_NR,
+			.label	= "GPX0",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC20),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= S5PV310_GPX1(0),
+			.ngpio	= S5PV310_GPIO_X1_NR,
+			.label	= "GPX1",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC40),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= S5PV310_GPX2(0),
+			.ngpio	= S5PV310_GPIO_X2_NR,
+			.label	= "GPX2",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC60),
+		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= S5PV310_GPX3(0),
+			.ngpio	= S5PV310_GPIO_X3_NR,
+			.label	= "GPX3",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5pv310_gpio_part3_4bit[] = {
+	{
+		.chip	= {
+			.base	= S5PV310_GPZ(0),
+			.ngpio	= S5PV310_GPIO_Z_NR,
+			.label	= "GPZ",
+		},
+	},
+};
+
+static __init int s5pv310_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chip;
+	int i;
+	int nr_chips;
+
+	/* GPIO part 1 */
+
+	chip = s5pv310_gpio_part1_4bit;
+	nr_chips = ARRAY_SIZE(s5pv310_gpio_part1_4bit);
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL)
+			chip->config = &gpio_cfg;
+		if (chip->base == NULL)
+			chip->base = S5P_VA_GPIO1 + (i) * 0x20;
+	}
+
+	samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part1_4bit, nr_chips);
+
+	/* GPIO part 2 */
+
+	chip = s5pv310_gpio_part2_4bit;
+	nr_chips = ARRAY_SIZE(s5pv310_gpio_part2_4bit);
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL)
+			chip->config = &gpio_cfg;
+		if (chip->base == NULL)
+			chip->base = S5P_VA_GPIO2 + (i) * 0x20;
+	}
+
+	samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part2_4bit, nr_chips);
+
+	/* GPIO part 3 */
+
+	chip = s5pv310_gpio_part3_4bit;
+	nr_chips = ARRAY_SIZE(s5pv310_gpio_part3_4bit);
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL)
+			chip->config = &gpio_cfg;
+		if (chip->base == NULL)
+			chip->base = S5P_VA_GPIO3 + (i) * 0x20;
+	}
+
+	samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part3_4bit, nr_chips);
+
+	return 0;
+}
+core_initcall(s5pv310_gpiolib_init);
diff --git a/arch/arm/mach-s5pv310/headsmp.S b/arch/arm/mach-s5pv310/headsmp.S
new file mode 100644
index 000000000000..164b7b045713
--- /dev/null
+++ b/arch/arm/mach-s5pv310/headsmp.S
@@ -0,0 +1,41 @@
+/*
+ *  linux/arch/arm/mach-s5pv310/headsmp.S
+ *
+ *  Cloned from linux/arch/arm/mach-realview/headsmp.S
+ *
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * s5pv310 specific entry point for secondary CPUs.  This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(s5pv310_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+1:	.long	.
+	.long	pen_release
diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-s5pv310/hotplug.c
new file mode 100644
index 000000000000..03652c3605f6
--- /dev/null
+++ b/arch/arm/mach-s5pv310/hotplug.c
@@ -0,0 +1,144 @@
+/* linux arch/arm/mach-s5pv310/hotplug.c
+ *
+ *  Cloned from linux/arch/arm/mach-realview/hotplug.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+#include <asm/cacheflush.h>
+
+extern volatile int pen_release;
+
+static DECLARE_COMPLETION(cpu_killed);
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, #0x04\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+	"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, #0x04\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  :
+	  : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+	/*
+	 * there is no power-control hardware on this platform, so all
+	 * we can do is put the core into WFI; this is safe as the calling
+	 * code will have already disabled interrupts
+	 */
+	for (;;) {
+		/*
+		 * here's the WFI
+		 */
+		asm(".word	0xe320f003\n"
+		    :
+		    :
+		    : "memory", "cc");
+
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * The trouble is, letting people know about this is not really
+		 * possible, since we are currently running incoherently, and
+		 * therefore cannot safely call printk() or anything else
+		 */
+#ifdef DEBUG
+		printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu);
+#endif
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+#ifdef DEBUG
+	unsigned int this_cpu = hard_smp_processor_id();
+
+	if (cpu != this_cpu) {
+		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
+			   this_cpu, cpu);
+		BUG();
+	}
+#endif
+
+	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+	complete(&cpu_killed);
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-s5pv310/include/mach/debug-macro.S
new file mode 100644
index 000000000000..b0d920c474d3
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/debug-macro.S
@@ -0,0 +1,35 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rp, rv
+		ldreq	\rp, = S3C_PA_UART
+		ldrne	\rv, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pv310/include/mach/entry-macro.S b/arch/arm/mach-s5pv310/include/mach/entry-macro.S
new file mode 100644
index 000000000000..e600e1d522df
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/entry-macro.S
@@ -0,0 +1,84 @@
+/* arch/arm/mach-s5pv310/include/mach/entry-macro.S
+ *
+ * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for S5PV310 platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =gic_cpu_base_addr
+		ldr	\base, [\base]
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an interrupt if it's
+		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number of the highest
+                 * priority enabled interrupt.  We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+		addne	\irqnr, \irqnr, #32
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt on the
+		 * controller, since this requires the original irqstat value which
+		 * we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved.. */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff --git a/arch/arm/mach-s5pv310/include/mach/gpio.h b/arch/arm/mach-s5pv310/include/mach/gpio.h
new file mode 100644
index 000000000000..20cb80c23466
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/gpio.h
@@ -0,0 +1,135 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* Practically, GPIO banks upto GPZ are the configurable gpio banks */
+
+/* GPIO bank sizes */
+#define S5PV310_GPIO_A0_NR	(8)
+#define S5PV310_GPIO_A1_NR	(6)
+#define S5PV310_GPIO_B_NR	(8)
+#define S5PV310_GPIO_C0_NR	(5)
+#define S5PV310_GPIO_C1_NR	(5)
+#define S5PV310_GPIO_D0_NR	(4)
+#define S5PV310_GPIO_D1_NR	(4)
+#define S5PV310_GPIO_E0_NR	(5)
+#define S5PV310_GPIO_E1_NR	(8)
+#define S5PV310_GPIO_E2_NR	(6)
+#define S5PV310_GPIO_E3_NR	(8)
+#define S5PV310_GPIO_E4_NR	(8)
+#define S5PV310_GPIO_F0_NR	(8)
+#define S5PV310_GPIO_F1_NR	(8)
+#define S5PV310_GPIO_F2_NR	(8)
+#define S5PV310_GPIO_F3_NR	(6)
+#define S5PV310_GPIO_J0_NR	(8)
+#define S5PV310_GPIO_J1_NR	(5)
+#define S5PV310_GPIO_K0_NR	(7)
+#define S5PV310_GPIO_K1_NR	(7)
+#define S5PV310_GPIO_K2_NR	(7)
+#define S5PV310_GPIO_K3_NR	(7)
+#define S5PV310_GPIO_L0_NR	(8)
+#define S5PV310_GPIO_L1_NR	(3)
+#define S5PV310_GPIO_L2_NR	(8)
+#define S5PV310_GPIO_X0_NR	(8)
+#define S5PV310_GPIO_X1_NR	(8)
+#define S5PV310_GPIO_X2_NR	(8)
+#define S5PV310_GPIO_X3_NR	(8)
+#define S5PV310_GPIO_Z_NR	(7)
+
+/* GPIO bank numbers */
+
+#define S5PV310_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+	S5PV310_GPIO_A0_START	= 0,
+	S5PV310_GPIO_A1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_A0),
+	S5PV310_GPIO_B_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_A1),
+	S5PV310_GPIO_C0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_B),
+	S5PV310_GPIO_C1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_C0),
+	S5PV310_GPIO_D0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_C1),
+	S5PV310_GPIO_D1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_D0),
+	S5PV310_GPIO_E0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_D1),
+	S5PV310_GPIO_E1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_E0),
+	S5PV310_GPIO_E2_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_E1),
+	S5PV310_GPIO_E3_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_E2),
+	S5PV310_GPIO_E4_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_E3),
+	S5PV310_GPIO_F0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_E4),
+	S5PV310_GPIO_F1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_F0),
+	S5PV310_GPIO_F2_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_F1),
+	S5PV310_GPIO_F3_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_F2),
+	S5PV310_GPIO_J0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_F3),
+	S5PV310_GPIO_J1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_J0),
+	S5PV310_GPIO_K0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_J1),
+	S5PV310_GPIO_K1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_K0),
+	S5PV310_GPIO_K2_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_K1),
+	S5PV310_GPIO_K3_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_K2),
+	S5PV310_GPIO_L0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_K3),
+	S5PV310_GPIO_L1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_L0),
+	S5PV310_GPIO_L2_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_L1),
+	S5PV310_GPIO_X0_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_L2),
+	S5PV310_GPIO_X1_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_X0),
+	S5PV310_GPIO_X2_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_X1),
+	S5PV310_GPIO_X3_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_X2),
+	S5PV310_GPIO_Z_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_X3),
+};
+
+/* S5PV310 GPIO number definitions */
+#define S5PV310_GPA0(_nr)	(S5PV310_GPIO_A0_START + (_nr))
+#define S5PV310_GPA1(_nr)	(S5PV310_GPIO_A1_START + (_nr))
+#define S5PV310_GPB(_nr)	(S5PV310_GPIO_B_START + (_nr))
+#define S5PV310_GPC0(_nr)	(S5PV310_GPIO_C0_START + (_nr))
+#define S5PV310_GPC1(_nr)	(S5PV310_GPIO_C1_START + (_nr))
+#define S5PV310_GPD0(_nr)	(S5PV310_GPIO_D0_START + (_nr))
+#define S5PV310_GPD1(_nr)	(S5PV310_GPIO_D1_START + (_nr))
+#define S5PV310_GPE0(_nr)	(S5PV310_GPIO_E0_START + (_nr))
+#define S5PV310_GPE1(_nr)	(S5PV310_GPIO_E1_START + (_nr))
+#define S5PV310_GPE2(_nr)	(S5PV310_GPIO_E2_START + (_nr))
+#define S5PV310_GPE3(_nr)	(S5PV310_GPIO_E3_START + (_nr))
+#define S5PV310_GPE4(_nr)	(S5PV310_GPIO_E4_START + (_nr))
+#define S5PV310_GPF0(_nr)	(S5PV310_GPIO_F0_START + (_nr))
+#define S5PV310_GPF1(_nr)	(S5PV310_GPIO_F1_START + (_nr))
+#define S5PV310_GPF2(_nr)	(S5PV310_GPIO_F2_START + (_nr))
+#define S5PV310_GPF3(_nr)	(S5PV310_GPIO_F3_START + (_nr))
+#define S5PV310_GPJ0(_nr)	(S5PV310_GPIO_J0_START + (_nr))
+#define S5PV310_GPJ1(_nr)	(S5PV310_GPIO_J1_START + (_nr))
+#define S5PV310_GPK0(_nr)	(S5PV310_GPIO_K0_START + (_nr))
+#define S5PV310_GPK1(_nr)	(S5PV310_GPIO_K1_START + (_nr))
+#define S5PV310_GPK2(_nr)	(S5PV310_GPIO_K2_START + (_nr))
+#define S5PV310_GPK3(_nr)	(S5PV310_GPIO_K3_START + (_nr))
+#define S5PV310_GPL0(_nr)	(S5PV310_GPIO_L0_START + (_nr))
+#define S5PV310_GPL1(_nr)	(S5PV310_GPIO_L1_START + (_nr))
+#define S5PV310_GPL2(_nr)	(S5PV310_GPIO_L2_START + (_nr))
+#define S5PV310_GPX0(_nr)	(S5PV310_GPIO_X0_START + (_nr))
+#define S5PV310_GPX1(_nr)	(S5PV310_GPIO_X1_START + (_nr))
+#define S5PV310_GPX2(_nr)	(S5PV310_GPIO_X2_START + (_nr))
+#define S5PV310_GPX3(_nr)	(S5PV310_GPIO_X3_START + (_nr))
+#define S5PV310_GPZ(_nr)	(S5PV310_GPIO_Z_START + (_nr))
+
+/* the end of the S5PV310 specific gpios */
+#define S5PV310_GPIO_END	(S5PV310_GPZ(S5PV310_GPIO_Z_NR) + 1)
+#define S3C_GPIO_END		S5PV310_GPIO_END
+
+/* define the number of gpios we need to the one after the GPZ() range */
+#define ARCH_NR_GPIOS		(S5PV310_GPZ(S5PV310_GPIO_Z_NR) +	\
+				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/hardware.h b/arch/arm/mach-s5pv310/include/mach/hardware.h
new file mode 100644
index 000000000000..28ff9881f1a6
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/io.h b/arch/arm/mach-s5pv310/include/mach/io.h
new file mode 100644
index 000000000000..8a7f9128391f
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/io.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/io.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Default IO routines for S5PV310
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H __FILE__
+
+/* No current ISA/PCI bus support. */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-s5pv310/include/mach/irqs.h
new file mode 100644
index 000000000000..99e7dad8a85a
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/irqs.h
@@ -0,0 +1,115 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* PPI: Private Peripheral Interrupt */
+
+#define IRQ_PPI(x)		S5P_IRQ(x+16)
+
+#define IRQ_LOCALTIMER		IRQ_PPI(13)
+
+/* SPI: Shared Peripheral Interrupt */
+
+#define IRQ_SPI(x)		S5P_IRQ(x+32)
+
+#define IRQ_EINT0		IRQ_SPI(40)
+#define IRQ_EINT1		IRQ_SPI(41)
+#define IRQ_EINT2		IRQ_SPI(42)
+#define IRQ_EINT3		IRQ_SPI(43)
+#define IRQ_USB_HSOTG		IRQ_SPI(44)
+#define IRQ_USB_HOST		IRQ_SPI(45)
+#define IRQ_MODEM_IF		IRQ_SPI(46)
+#define IRQ_ROTATOR		IRQ_SPI(47)
+#define IRQ_JPEG		IRQ_SPI(48)
+#define IRQ_2D			IRQ_SPI(49)
+#define IRQ_PCIE		IRQ_SPI(50)
+#define IRQ_SYSTEM_TIMER	IRQ_SPI(51)
+#define IRQ_MFC			IRQ_SPI(52)
+#define IRQ_WDT			IRQ_SPI(53)
+#define IRQ_AUDIO_SS		IRQ_SPI(54)
+#define IRQ_AC97		IRQ_SPI(55)
+#define IRQ_SPDIF		IRQ_SPI(56)
+#define IRQ_KEYPAD		IRQ_SPI(57)
+#define IRQ_INTFEEDCTRL_SSS	IRQ_SPI(58)
+#define IRQ_SLIMBUS		IRQ_SPI(59)
+#define IRQ_PMU			IRQ_SPI(60)
+#define IRQ_TSI			IRQ_SPI(61)
+#define IRQ_SATA		IRQ_SPI(62)
+#define IRQ_GPS			IRQ_SPI(63)
+
+#define MAX_IRQ_IN_COMBINER	8
+#define COMBINER_GROUP(x)	((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64))
+#define COMBINER_IRQ(x, y)	(COMBINER_GROUP(x) + y)
+
+#define IRQ_TIMER0_VIC		COMBINER_IRQ(22, 0)
+#define IRQ_TIMER1_VIC		COMBINER_IRQ(22, 1)
+#define IRQ_TIMER2_VIC		COMBINER_IRQ(22, 2)
+#define IRQ_TIMER3_VIC		COMBINER_IRQ(22, 3)
+#define IRQ_TIMER4_VIC		COMBINER_IRQ(22, 4)
+
+#define IRQ_RTC_ALARM		COMBINER_IRQ(23, 0)
+#define IRQ_RTC_TIC		COMBINER_IRQ(23, 1)
+
+#define IRQ_UART0		COMBINER_IRQ(26, 0)
+#define IRQ_UART1		COMBINER_IRQ(26, 1)
+#define IRQ_UART2		COMBINER_IRQ(26, 2)
+#define IRQ_UART3		COMBINER_IRQ(26, 3)
+#define IRQ_UART4		COMBINER_IRQ(26, 4)
+
+#define IRQ_IIC			COMBINER_IRQ(27, 0)
+#define IRQ_IIC1		COMBINER_IRQ(27, 1)
+#define IRQ_IIC2		COMBINER_IRQ(27, 2)
+#define IRQ_IIC3		COMBINER_IRQ(27, 3)
+#define IRQ_IIC4		COMBINER_IRQ(27, 4)
+#define IRQ_IIC5		COMBINER_IRQ(27, 5)
+#define IRQ_IIC6		COMBINER_IRQ(27, 6)
+#define IRQ_IIC7		COMBINER_IRQ(27, 7)
+
+#define IRQ_HSMMC0		COMBINER_IRQ(29, 0)
+#define IRQ_HSMMC1		COMBINER_IRQ(29, 1)
+#define IRQ_HSMMC2		COMBINER_IRQ(29, 2)
+#define IRQ_HSMMC3		COMBINER_IRQ(29, 3)
+
+#define IRQ_ONENAND_AUDI	COMBINER_IRQ(34, 0)
+
+#define IRQ_EINT4		COMBINER_IRQ(37, 0)
+#define IRQ_EINT5		COMBINER_IRQ(37, 1)
+#define IRQ_EINT6		COMBINER_IRQ(37, 2)
+#define IRQ_EINT7		COMBINER_IRQ(37, 3)
+#define IRQ_EINT8		COMBINER_IRQ(38, 0)
+
+#define IRQ_EINT9		COMBINER_IRQ(38, 1)
+#define IRQ_EINT10		COMBINER_IRQ(38, 2)
+#define IRQ_EINT11		COMBINER_IRQ(38, 3)
+#define IRQ_EINT12		COMBINER_IRQ(38, 4)
+#define IRQ_EINT13		COMBINER_IRQ(38, 5)
+#define IRQ_EINT14		COMBINER_IRQ(38, 6)
+#define IRQ_EINT15		COMBINER_IRQ(38, 7)
+
+#define IRQ_EINT16_31		COMBINER_IRQ(39, 0)
+
+#define MAX_COMBINER_NR		40
+
+#define S5P_IRQ_EINT_BASE	COMBINER_IRQ(MAX_COMBINER_NR, 0)
+
+#define S5P_EINT_BASE1		(S5P_IRQ_EINT_BASE + 0)
+#define S5P_EINT_BASE2		(S5P_IRQ_EINT_BASE + 16)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS			(S5P_IRQ_EINT_BASE + 32)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
new file mode 100644
index 000000000000..7acf4e77e92e
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -0,0 +1,99 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+/*
+ * S5PV310 UART offset is 0x10000 but the older S5P SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET			(0x10000)
+
+#include <plat/map-s5p.h>
+
+#define S5PV310_PA_SYSRAM		(0x02025000)
+
+#define S5PV310_PA_SROM_BANK(x)		(0x04000000 + ((x) * 0x01000000))
+
+#define S5PC210_PA_ONENAND		(0x0C000000)
+#define S5P_PA_ONENAND			S5PC210_PA_ONENAND
+
+#define S5PC210_PA_ONENAND_DMA		(0x0C600000)
+#define S5P_PA_ONENAND_DMA		S5PC210_PA_ONENAND_DMA
+
+#define S5PV310_PA_CHIPID		(0x10000000)
+#define S5P_PA_CHIPID			S5PV310_PA_CHIPID
+
+#define S5PV310_PA_SYSCON		(0x10010000)
+#define S5P_PA_SYSCON			S5PV310_PA_SYSCON
+
+#define S5PV310_PA_CMU			(0x10030000)
+
+#define S5PV310_PA_WATCHDOG		(0x10060000)
+#define S5PV310_PA_RTC			(0x10070000)
+
+#define S5PV310_PA_COMBINER		(0x10448000)
+
+#define S5PV310_PA_COREPERI		(0x10500000)
+#define S5PV310_PA_GIC_CPU		(0x10500100)
+#define S5PV310_PA_TWD			(0x10500600)
+#define S5PV310_PA_GIC_DIST		(0x10501000)
+#define S5PV310_PA_L2CC			(0x10502000)
+
+#define S5PV310_PA_GPIO1		(0x11400000)
+#define S5PV310_PA_GPIO2		(0x11000000)
+#define S5PV310_PA_GPIO3		(0x03860000)
+
+#define S5PV310_PA_HSMMC(x)		(0x12510000 + ((x) * 0x10000))
+
+#define S5PV310_PA_SROMC		(0x12570000)
+
+#define S5PV310_PA_UART			(0x13800000)
+
+#define S5P_PA_UART(x)			(S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART0			S5P_PA_UART(0)
+#define S5P_PA_UART1			S5P_PA_UART(1)
+#define S5P_PA_UART2			S5P_PA_UART(2)
+#define S5P_PA_UART3			S5P_PA_UART(3)
+#define S5P_PA_UART4			S5P_PA_UART(4)
+
+#define S5P_SZ_UART			SZ_256
+
+#define S5PV310_PA_IIC(x)		(0x13860000 + ((x) * 0x10000))
+
+#define S5PV310_PA_TIMER		(0x139D0000)
+#define S5P_PA_TIMER			S5PV310_PA_TIMER
+
+#define S5PV310_PA_SDRAM		(0x40000000)
+#define S5P_PA_SDRAM			S5PV310_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART			S5PV310_PA_UART
+#define S3C_PA_HSMMC0			S5PV310_PA_HSMMC(0)
+#define S3C_PA_HSMMC1			S5PV310_PA_HSMMC(1)
+#define S3C_PA_HSMMC2			S5PV310_PA_HSMMC(2)
+#define S3C_PA_HSMMC3			S5PV310_PA_HSMMC(3)
+#define S3C_PA_IIC			S5PV310_PA_IIC(0)
+#define S3C_PA_IIC1			S5PV310_PA_IIC(1)
+#define S3C_PA_IIC2			S5PV310_PA_IIC(2)
+#define S3C_PA_IIC3			S5PV310_PA_IIC(3)
+#define S3C_PA_IIC4			S5PV310_PA_IIC(4)
+#define S3C_PA_IIC5			S5PV310_PA_IIC(5)
+#define S3C_PA_IIC6			S5PV310_PA_IIC(6)
+#define S3C_PA_IIC7			S5PV310_PA_IIC(7)
+#define S3C_PA_RTC			S5PV310_PA_RTC
+#define S3C_PA_WDT			S5PV310_PA_WATCHDOG
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/memory.h b/arch/arm/mach-s5pv310/include/mach/memory.h
new file mode 100644
index 000000000000..1dffb4823245
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/memory.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H __FILE__
+
+#define PHYS_OFFSET		UL(0x40000000)
+
+/* Maximum of 256MiB in one bank */
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	28
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/pwm-clock.h b/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
new file mode 100644
index 000000000000..7e6da2701088
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
+ *
+ * S5PV310 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-s5pv310/include/mach/regs-clock.h
new file mode 100644
index 000000000000..f1028cad9788
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/regs-clock.h
@@ -0,0 +1,91 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)			(S5P_VA_CMU + (x))
+
+#define S5P_INFORM0			S5P_CLKREG(0x800)
+
+#define S5P_EPLL_CON0			S5P_CLKREG(0x0C110)
+#define S5P_EPLL_CON1			S5P_CLKREG(0x0C114)
+#define S5P_VPLL_CON0			S5P_CLKREG(0x0C120)
+#define S5P_VPLL_CON1			S5P_CLKREG(0x0C124)
+
+#define S5P_CLKSRC_TOP0			S5P_CLKREG(0x0C210)
+#define S5P_CLKSRC_TOP1			S5P_CLKREG(0x0C214)
+#define S5P_CLKSRC_CAM			S5P_CLKREG(0x0C220)
+#define S5P_CLKSRC_IMAGE		S5P_CLKREG(0x0C230)
+#define S5P_CLKSRC_LCD0			S5P_CLKREG(0x0C234)
+#define S5P_CLKSRC_LCD1			S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_FSYS			S5P_CLKREG(0x0C240)
+#define S5P_CLKSRC_PERIL0		S5P_CLKREG(0x0C250)
+#define S5P_CLKSRC_PERIL1		S5P_CLKREG(0x0C254)
+
+#define S5P_CLKDIV_TOP			S5P_CLKREG(0x0C510)
+#define S5P_CLKDIV_CAM			S5P_CLKREG(0x0C520)
+#define S5P_CLKDIV_IMAGE		S5P_CLKREG(0x0C530)
+#define S5P_CLKDIV_LCD0			S5P_CLKREG(0x0C534)
+#define S5P_CLKDIV_LCD1			S5P_CLKREG(0x0C538)
+#define S5P_CLKDIV_FSYS0		S5P_CLKREG(0x0C540)
+#define S5P_CLKDIV_FSYS1		S5P_CLKREG(0x0C544)
+#define S5P_CLKDIV_FSYS2		S5P_CLKREG(0x0C548)
+#define S5P_CLKDIV_FSYS3		S5P_CLKREG(0x0C54C)
+#define S5P_CLKDIV_PERIL0		S5P_CLKREG(0x0C550)
+#define S5P_CLKDIV_PERIL1		S5P_CLKREG(0x0C554)
+#define S5P_CLKDIV_PERIL2		S5P_CLKREG(0x0C558)
+#define S5P_CLKDIV_PERIL3		S5P_CLKREG(0x0C55C)
+#define S5P_CLKDIV_PERIL4		S5P_CLKREG(0x0C560)
+#define S5P_CLKDIV_PERIL5		S5P_CLKREG(0x0C564)
+
+#define S5P_CLKSRC_MASK_TOP		S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM		S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_LCD0		S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_LCD1		S5P_CLKREG(0x0C338)
+#define S5P_CLKSRC_MASK_FSYS		S5P_CLKREG(0x0C340)
+#define S5P_CLKSRC_MASK_PERIL0		S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1		S5P_CLKREG(0x0C354)
+
+#define S5P_CLKGATE_IP_CAM		S5P_CLKREG(0x0C920)
+#define S5P_CLKGATE_IP_IMAGE		S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_LCD0		S5P_CLKREG(0x0C934)
+#define S5P_CLKGATE_IP_LCD1		S5P_CLKREG(0x0C938)
+#define S5P_CLKGATE_IP_FSYS		S5P_CLKREG(0x0C940)
+#define S5P_CLKGATE_IP_PERIL		S5P_CLKREG(0x0C950)
+#define S5P_CLKGATE_IP_PERIR		S5P_CLKREG(0x0C960)
+
+#define S5P_CLKSRC_CORE			S5P_CLKREG(0x10200)
+#define S5P_CLKDIV_CORE0		S5P_CLKREG(0x10500)
+
+#define S5P_APLL_LOCK			S5P_CLKREG(0x14000)
+#define S5P_MPLL_LOCK			S5P_CLKREG(0x14004)
+#define S5P_APLL_CON0			S5P_CLKREG(0x14100)
+#define S5P_APLL_CON1			S5P_CLKREG(0x14104)
+#define S5P_MPLL_CON0			S5P_CLKREG(0x14108)
+#define S5P_MPLL_CON1			S5P_CLKREG(0x1410C)
+
+#define S5P_CLKSRC_CPU			S5P_CLKREG(0x14200)
+#define S5P_CLKMUX_STATCPU		S5P_CLKREG(0x14400)
+
+#define S5P_CLKDIV_CPU			S5P_CLKREG(0x14500)
+#define S5P_CLKDIV_STATCPU		S5P_CLKREG(0x14600)
+
+#define S5P_CLKGATE_SCLKCPU		S5P_CLKREG(0x14800)
+
+/* Compatibility defines */
+
+#define S5P_EPLL_CON			S5P_EPLL_CON0
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/regs-gpio.h b/arch/arm/mach-s5pv310/include/mach/regs-gpio.h
new file mode 100644
index 000000000000..82e9e0c9d452
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/regs-gpio.h
@@ -0,0 +1,42 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - GPIO (including EINT) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#define S5PV310_EINT40CON		(S5P_VA_GPIO2 + 0xE00)
+#define S5P_EINT_CON(x)			(S5PV310_EINT40CON + ((x) * 0x4))
+
+#define S5PV310_EINT40FLTCON0		(S5P_VA_GPIO2 + 0xE80)
+#define S5P_EINT_FLTCON(x)		(S5PV310_EINT40FLTCON0 + ((x) * 0x4))
+
+#define S5PV310_EINT40MASK		(S5P_VA_GPIO2 + 0xF00)
+#define S5P_EINT_MASK(x)		(S5PV310_EINT40MASK + ((x) * 0x4))
+
+#define S5PV310_EINT40PEND		(S5P_VA_GPIO2 + 0xF40)
+#define S5P_EINT_PEND(x)		(S5PV310_EINT40PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
+
+#define EINT_MODE			S3C_GPIO_SFN(0xf)
+
+#define EINT_GPIO_0(x)			S5PV310_GPX0(x)
+#define EINT_GPIO_1(x)			S5PV310_GPX1(x)
+#define EINT_GPIO_2(x)			S5PV310_GPX2(x)
+#define EINT_GPIO_3(x)			S5PV310_GPX3(x)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/regs-irq.h b/arch/arm/mach-s5pv310/include/mach/regs-irq.h
new file mode 100644
index 000000000000..c6e09c7f9161
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/gic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/regs-srom.h b/arch/arm/mach-s5pv310/include/mach/regs-srom.h
new file mode 100644
index 000000000000..1898b3e10550
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/regs-srom.h
@@ -0,0 +1,50 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/regs-srom.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - SROMC register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_SROM_H
+#define __ASM_ARCH_REGS_SROM_H __FILE__
+
+#include <mach/map.h>
+
+#define S5PV310_SROMREG(x)	(S5P_VA_SROMC + (x))
+
+#define S5PV310_SROM_BW		S5PV310_SROMREG(0x0)
+#define S5PV310_SROM_BC0	S5PV310_SROMREG(0x4)
+#define S5PV310_SROM_BC1	S5PV310_SROMREG(0x8)
+#define S5PV310_SROM_BC2	S5PV310_SROMREG(0xc)
+#define S5PV310_SROM_BC3	S5PV310_SROMREG(0x10)
+
+/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */
+
+#define S5PV310_SROM_BW__DATAWIDTH__SHIFT	0
+#define S5PV310_SROM_BW__ADDRMODE__SHIFT	1
+#define S5PV310_SROM_BW__WAITENABLE__SHIFT	2
+#define S5PV310_SROM_BW__BYTEENABLE__SHIFT	3
+
+#define S5PV310_SROM_BW__CS_MASK		0xf
+
+#define S5PV310_SROM_BW__NCS0__SHIFT		0
+#define S5PV310_SROM_BW__NCS1__SHIFT		4
+#define S5PV310_SROM_BW__NCS2__SHIFT		8
+#define S5PV310_SROM_BW__NCS3__SHIFT		12
+
+/* applies to same to BCS0 - BCS3 */
+
+#define S5PV310_SROM_BCX__PMC__SHIFT		0
+#define S5PV310_SROM_BCX__TACP__SHIFT		4
+#define S5PV310_SROM_BCX__TCAH__SHIFT		8
+#define S5PV310_SROM_BCX__TCOH__SHIFT		12
+#define S5PV310_SROM_BCX__TACC__SHIFT		16
+#define S5PV310_SROM_BCX__TCOS__SHIFT		24
+#define S5PV310_SROM_BCX__TACS__SHIFT		28
+
+#endif /* __ASM_ARCH_REGS_SROM_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h
new file mode 100644
index 000000000000..b7ec252384f4
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/smp.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/smp.h
+ *
+ * Cloned from arch/arm/mach-realview/include/mach/smp.h
+*/
+
+#ifndef ASM_ARCH_SMP_H
+#define ASM_ARCH_SMP_H __FILE__
+
+#include <asm/hardware/gic.h>
+#include <asm/smp_mpidr.h>
+
+extern void __iomem *gic_cpu_base_addr;
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+
+#endif
diff --git a/arch/arm/mach-s5pv310/include/mach/system.h b/arch/arm/mach-s5pv310/include/mach/system.h
new file mode 100644
index 000000000000..d10c009cf0f1
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/system.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+#include <plat/system-reset.h>
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/timex.h b/arch/arm/mach-s5pv310/include/mach/timex.h
new file mode 100644
index 000000000000..bd2359b952b4
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/timex.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/timex.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright (c) 2003-2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/timex.h
+ *
+ * S5PV310 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H __FILE__
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/uncompress.h b/arch/arm/mach-s5pv310/include/mach/uncompress.h
new file mode 100644
index 000000000000..59593c1e2416
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/uncompress.h
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H __FILE__
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+
+	/*
+	 * For preventing FIFO overrun or infinite loop of UART console,
+	 * fifo_max should be the minimum fifo size of all of the UART channels
+	 */
+	fifo_mask = S5PV210_UFSTAT_TXMASK;
+	fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
+}
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pv310/include/mach/vmalloc.h b/arch/arm/mach-s5pv310/include/mach/vmalloc.h
new file mode 100644
index 000000000000..65759fb97581
--- /dev/null
+++ b/arch/arm/mach-s5pv310/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5pv310/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S5PV310 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H __FILE__
+
+#define VMALLOC_END	0xF6000000UL
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv310/init.c b/arch/arm/mach-s5pv310/init.c
new file mode 100644
index 000000000000..182dcf42cfb4
--- /dev/null
+++ b/arch/arm/mach-s5pv310/init.c
@@ -0,0 +1,41 @@
+/* linux/arch/arm/mach-s5pv310/init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5pv310_serial_clocks[] = {
+	[0] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+void __init s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->has_fracval = 1;
+			tcfg->clocks = s5pv310_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(s5pv310_serial_clocks);
+		}
+	}
+
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5pv310/irq-combiner.c b/arch/arm/mach-s5pv310/irq-combiner.c
new file mode 100644
index 000000000000..c3f88c3faf6c
--- /dev/null
+++ b/arch/arm/mach-s5pv310/irq-combiner.c
@@ -0,0 +1,121 @@
+/* linux/arch/arm/mach-s5pv310/irq-combiner.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on arch/arm/common/gic.c
+ *
+ * IRQ COMBINER support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+#define COMBINER_ENABLE_SET	0x0
+#define COMBINER_ENABLE_CLEAR	0x4
+#define COMBINER_INT_STATUS	0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+	unsigned int irq_offset;
+	void __iomem *base;
+};
+
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(unsigned int irq)
+{
+	struct combiner_chip_data *combiner_data = get_irq_chip_data(irq);
+	return combiner_data->base;
+}
+
+static void combiner_mask_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq % 32);
+
+	__raw_writel(mask, combiner_base(irq) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(unsigned int irq)
+{
+	u32 mask = 1 << (irq % 32);
+
+	__raw_writel(mask, combiner_base(irq) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct combiner_chip_data *chip_data = get_irq_data(irq);
+	struct irq_chip *chip = get_irq_chip(irq);
+	unsigned int cascade_irq, combiner_irq;
+	unsigned long status;
+
+	/* primary controller ack'ing */
+	chip->ack(irq);
+
+	spin_lock(&irq_controller_lock);
+	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+	spin_unlock(&irq_controller_lock);
+
+	if (status == 0)
+		goto out;
+
+	combiner_irq = __ffs(status);
+
+	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+	if (unlikely(cascade_irq >= NR_IRQS))
+		do_bad_IRQ(cascade_irq, desc);
+	else
+		generic_handle_irq(cascade_irq);
+
+ out:
+	/* primary controller unmasking */
+	chip->unmask(irq);
+}
+
+static struct irq_chip combiner_chip = {
+	.name		= "COMBINER",
+	.mask		= combiner_mask_irq,
+	.unmask		= combiner_unmask_irq,
+};
+
+void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+	if (set_irq_data(irq, &combiner_data[combiner_nr]) != 0)
+		BUG();
+	set_irq_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
+			  unsigned int irq_start)
+{
+	unsigned int i;
+
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+
+	combiner_data[combiner_nr].base = base;
+	combiner_data[combiner_nr].irq_offset = irq_start;
+
+	/* Disable all interrupts */
+
+	__raw_writel(0xffffffff, base + COMBINER_ENABLE_CLEAR);
+
+	/* Setup the Linux IRQ subsystem */
+
+	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+				+ MAX_IRQ_IN_COMBINER; i++) {
+		set_irq_chip(i, &combiner_chip);
+		set_irq_chip_data(i, &combiner_data[combiner_nr]);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+}
diff --git a/arch/arm/mach-s5pv310/irq-eint.c b/arch/arm/mach-s5pv310/irq-eint.c
new file mode 100644
index 000000000000..5877503e92c3
--- /dev/null
+++ b/arch/arm/mach-s5pv310/irq-eint.c
@@ -0,0 +1,228 @@
+/* linux/arch/arm/mach-s5pv310/irq-eint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <plat/pm.h>
+#include <plat/cpu.h>
+#include <plat/gpio-cfg.h>
+
+#include <mach/regs-gpio.h>
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int s5pv310_get_irq_nr(unsigned int number)
+{
+	u32 ret = 0;
+
+	switch (number) {
+	case 0 ... 3:
+		ret = (number + IRQ_EINT0);
+		break;
+	case 4 ... 7:
+		ret = (number + (IRQ_EINT4 - 4));
+		break;
+	case 8 ... 15:
+		ret = (number + (IRQ_EINT8 - 8));
+		break;
+	default:
+		printk(KERN_ERR "number available : %d\n", number);
+	}
+
+	return ret;
+}
+
+static inline void s5pv310_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask |= eint_irq_to_bit(irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+	spin_unlock(&eint_lock);
+}
+
+static void s5pv310_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask &= ~(eint_irq_to_bit(irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+	spin_unlock(&eint_lock);
+}
+
+static inline void s5pv310_irq_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5pv310_irq_eint_maskack(unsigned int irq)
+{
+	s5pv310_irq_eint_mask(irq);
+	s5pv310_irq_eint_ack(irq);
+}
+
+static int s5pv310_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	int offs = EINT_OFFSET(irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	spin_lock(&eint_lock);
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq)));
+	spin_unlock(&eint_lock);
+
+	switch (offs) {
+	case 0 ... 7:
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+		break;
+	case 8 ... 15:
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+		break;
+	case 16 ... 23:
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+		break;
+	case 24 ... 31:
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+		break;
+	default:
+		printk(KERN_ERR "No such irq number %d", offs);
+	}
+
+	return 0;
+}
+
+static struct irq_chip s5pv310_irq_eint = {
+	.name		= "s5pv310-eint",
+	.mask		= s5pv310_irq_eint_mask,
+	.unmask		= s5pv310_irq_eint_unmask,
+	.mask_ack	= s5pv310_irq_eint_maskack,
+	.ack		= s5pv310_irq_eint_ack,
+	.set_type	= s5pv310_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/* s5pv310_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5pv310_irq_demux_eint(unsigned int start)
+{
+	unsigned int irq;
+
+	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status) - 1;
+		generic_handle_irq(irq + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void s5pv310_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s5pv310_irq_demux_eint(IRQ_EINT(16));
+	s5pv310_irq_demux_eint(IRQ_EINT(24));
+}
+
+static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+	u32 *irq_data = get_irq_data(irq);
+	struct irq_chip *chip = get_irq_chip(irq);
+
+	chip->mask(irq);
+
+	if (chip->ack)
+		chip->ack(irq);
+
+	generic_handle_irq(*irq_data);
+
+	chip->unmask(irq);
+}
+
+int __init s5pv310_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = 0 ; irq <= 31 ; irq++) {
+		set_irq_chip(IRQ_EINT(irq), &s5pv310_irq_eint);
+		set_irq_handler(IRQ_EINT(irq), handle_level_irq);
+		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT16_31, s5pv310_irq_demux_eint16_31);
+
+	for (irq = 0 ; irq <= 15 ; irq++) {
+		eint0_15_data[irq] = IRQ_EINT(irq);
+
+		set_irq_data(s5pv310_get_irq_nr(irq), &eint0_15_data[irq]);
+		set_irq_chained_handler(s5pv310_get_irq_nr(irq),
+					s5pv310_irq_eint0_15);
+	}
+
+	return 0;
+}
+
+arch_initcall(s5pv310_init_irq_eint);
diff --git a/arch/arm/mach-s5pv310/localtimer.c b/arch/arm/mach-s5pv310/localtimer.c
new file mode 100644
index 000000000000..2784036cd8b1
--- /dev/null
+++ b/arch/arm/mach-s5pv310/localtimer.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5pv310/localtimer.c
+ *
+ * Cloned from linux/arch/arm/mach-realview/localtimer.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clockchips.h>
+
+#include <asm/irq.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-s5pv310/mach-smdkc210.c b/arch/arm/mach-s5pv310/mach-smdkc210.c
new file mode 100644
index 000000000000..2b8d4fc52d7c
--- /dev/null
+++ b/arch/arm/mach-s5pv310/mach-smdkc210.c
@@ -0,0 +1,202 @@
+/* linux/arch/arm/mach-s5pv310/mach-smdkc210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv310.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+#include <mach/regs-srom.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDKC210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDKC210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDKC210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDKC210_UCON_DEFAULT,
+		.ulcon		= SMDKC210_ULCON_DEFAULT,
+		.ufcon		= SMDKC210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDKC210_UCON_DEFAULT,
+		.ulcon		= SMDKC210_ULCON_DEFAULT,
+		.ufcon		= SMDKC210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDKC210_UCON_DEFAULT,
+		.ulcon		= SMDKC210_ULCON_DEFAULT,
+		.ufcon		= SMDKC210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDKC210_UCON_DEFAULT,
+		.ulcon		= SMDKC210_ULCON_DEFAULT,
+		.ufcon		= SMDKC210_UFCON_DEFAULT,
+	},
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK0(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
+	.max_width		= 8,
+	.host_caps		= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK0(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK2(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
+	.max_width		= 8,
+	.host_caps		= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK2(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct resource smdkc210_smsc911x_resources[] = {
+	[0] = {
+		.start	= S5PV310_PA_SROM_BANK(1),
+		.end	= S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_EINT(5),
+		.end	= IRQ_EINT(5),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct smsc911x_platform_config smsc9215_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
+};
+
+static struct platform_device smdkc210_smsc911x = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smdkc210_smsc911x_resources),
+	.resource	= smdkc210_smsc911x_resources,
+	.dev		= {
+		.platform_data	= &smsc9215_config,
+	},
+};
+
+static struct platform_device *smdkc210_devices[] __initdata = {
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&smdkc210_smsc911x,
+};
+
+static void __init smdkc210_smsc911x_init(void)
+{
+	u32 cs1;
+
+	/* configure nCS1 width to 16 bits */
+	cs1 = __raw_readl(S5PV310_SROM_BW) &
+		    ~(S5PV310_SROM_BW__CS_MASK <<
+				    S5PV310_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
+		S5PV310_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S5PV310_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+	__raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
+		     (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
+		     (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
+		     (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
+		     (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
+		     (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
+		     (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
+}
+
+static void __init smdkc210_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
+}
+
+static void __init smdkc210_machine_init(void)
+{
+	smdkc210_smsc911x_init();
+
+	s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
+	s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
+	s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
+	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
+
+	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
+}
+
+MACHINE_START(SMDKC210, "SMDKC210")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv310_init_irq,
+	.map_io		= smdkc210_map_io,
+	.init_machine	= smdkc210_machine_init,
+	.timer		= &s5pv310_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-s5pv310/mach-smdkv310.c
new file mode 100644
index 000000000000..35826d66632c
--- /dev/null
+++ b/arch/arm/mach-s5pv310/mach-smdkv310.c
@@ -0,0 +1,203 @@
+/* linux/arch/arm/mach-s5pv310/mach-smdkv310.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv310.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+#include <mach/regs-srom.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDKV310_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDKV310_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDKV310_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDKV310_UCON_DEFAULT,
+		.ulcon		= SMDKV310_ULCON_DEFAULT,
+		.ufcon		= SMDKV310_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDKV310_UCON_DEFAULT,
+		.ulcon		= SMDKV310_ULCON_DEFAULT,
+		.ufcon		= SMDKV310_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDKV310_UCON_DEFAULT,
+		.ulcon		= SMDKV310_ULCON_DEFAULT,
+		.ufcon		= SMDKV310_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDKV310_UCON_DEFAULT,
+		.ulcon		= SMDKV310_ULCON_DEFAULT,
+		.ufcon		= SMDKV310_UFCON_DEFAULT,
+	},
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK0(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
+	.max_width		= 8,
+	.host_caps		= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK0(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK2(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
+	.max_width		= 8,
+	.host_caps		= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK2(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct resource smdkv310_smsc911x_resources[] = {
+	[0] = {
+		.start	= S5PV310_PA_SROM_BANK(1),
+		.end	= S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_EINT(5),
+		.end	= IRQ_EINT(5),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct smsc911x_platform_config smsc9215_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
+};
+
+static struct platform_device smdkv310_smsc911x = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smdkv310_smsc911x_resources),
+	.resource	= smdkv310_smsc911x_resources,
+	.dev		= {
+		.platform_data	= &smsc9215_config,
+	},
+};
+
+static struct platform_device *smdkv310_devices[] __initdata = {
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&smdkv310_smsc911x,
+};
+
+static void __init smdkv310_smsc911x_init(void)
+{
+	u32 cs1;
+
+	/* configure nCS1 width to 16 bits */
+	cs1 = __raw_readl(S5PV310_SROM_BW) &
+		    ~(S5PV310_SROM_BW__CS_MASK <<
+				    S5PV310_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
+		S5PV310_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S5PV310_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+	__raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
+		     (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
+		     (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
+		     (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
+		     (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
+		     (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
+		     (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
+}
+
+static void __init smdkv310_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
+}
+
+static void __init smdkv310_machine_init(void)
+{
+	smdkv310_smsc911x_init();
+
+	s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
+	s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
+	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
+	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
+
+	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
+}
+
+MACHINE_START(SMDKV310, "SMDKV310")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv310_init_irq,
+	.map_io		= smdkv310_map_io,
+	.init_machine	= smdkv310_machine_init,
+	.timer		= &s5pv310_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c
new file mode 100644
index 000000000000..16d8fc00cafd
--- /dev/null
+++ b/arch/arm/mach-s5pv310/mach-universal_c210.c
@@ -0,0 +1,157 @@
+/* linux/arch/arm/mach-s5pv310/mach-universal_c210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv310.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define UNIVERSAL_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define UNIVERSAL_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG256 |	\
+				 S5PV210_UFCON_RXTRIG256)
+
+static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.ucon		= UNIVERSAL_UCON_DEFAULT,
+		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
+		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.ucon		= UNIVERSAL_UCON_DEFAULT,
+		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
+		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.ucon		= UNIVERSAL_UCON_DEFAULT,
+		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
+		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.ucon		= UNIVERSAL_UCON_DEFAULT,
+		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
+		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
+	},
+};
+
+static struct gpio_keys_button universal_gpio_keys_tables[] = {
+	{
+		.code			= KEY_VOLUMEUP,
+		.gpio			= S5PV310_GPX2(0),	/* XEINT16 */
+		.desc			= "gpio-keys: KEY_VOLUMEUP",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_VOLUMEDOWN,
+		.gpio			= S5PV310_GPX2(1),	/* XEINT17 */
+		.desc			= "gpio-keys: KEY_VOLUMEDOWN",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_CONFIG,
+		.gpio			= S5PV310_GPX2(2),	/* XEINT18 */
+		.desc			= "gpio-keys: KEY_CONFIG",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_CAMERA,
+		.gpio			= S5PV310_GPX2(3),	/* XEINT19 */
+		.desc			= "gpio-keys: KEY_CAMERA",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.debounce_interval	= 1,
+	}, {
+		.code			= KEY_OK,
+		.gpio			= S5PV310_GPX3(5),	/* XEINT29 */
+		.desc			= "gpio-keys: KEY_OK",
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.debounce_interval	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data universal_gpio_keys_data = {
+	.buttons	= universal_gpio_keys_tables,
+	.nbuttons	= ARRAY_SIZE(universal_gpio_keys_tables),
+};
+
+static struct platform_device universal_gpio_keys = {
+	.name			= "gpio-keys",
+	.dev			= {
+		.platform_data	= &universal_gpio_keys_data,
+	},
+};
+
+/* I2C0 */
+static struct i2c_board_info i2c0_devs[] __initdata = {
+	/* Camera, To be updated */
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+	/* Gyro, To be updated */
+};
+
+static struct platform_device *universal_devices[] __initdata = {
+	&universal_gpio_keys,
+	&s5p_device_onenand,
+};
+
+static void __init universal_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
+}
+
+static void __init universal_machine_init(void)
+{
+	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
+	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+
+	/* Last */
+	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
+}
+
+MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
+	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv310_init_irq,
+	.map_io		= universal_map_io,
+	.init_machine	= universal_machine_init,
+	.timer		= &s5pv310_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c
new file mode 100644
index 000000000000..d357c198edee
--- /dev/null
+++ b/arch/arm/mach-s5pv310/platsmp.c
@@ -0,0 +1,192 @@
+/* linux/arch/arm/mach-s5pv310/platsmp.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <asm/unified.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+extern void s5pv310_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+
+volatile int __cpuinitdata pen_release = -1;
+
+static void __iomem *scu_base_addr(void)
+{
+	return (void __iomem *)(S5P_VA_SCU);
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_cpu_init(0, gic_cpu_base_addr);
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 *
+	 * Note that "pen_release" is the hardware CPU ID, whereas
+	 * "cpu" is Linux's internal ID.
+	 */
+	pen_release = cpu;
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
+	 */
+	smp_cross_call(cpumask_of(cpu));
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+
+void __init smp_init_cpus(void)
+{
+	void __iomem *scu_base = scu_base_addr();
+	unsigned int i, ncores;
+
+	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "S5PV310: strange CM count of 0? Default to 1\n");
+
+		ncores = 1;
+	}
+
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "S5PV310: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = num_possible_cpus();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	smp_store_cpu_info(cpu);
+
+	/* are we trying to boot more cores than exist? */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	/*
+	 * Initialise the SCU if there are more than one CPU and let
+	 * them know where to start.
+	 */
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		scu_enable(scu_base_addr());
+
+		/*
+		 * Write the address of secondary startup into the
+		 * system-wide flags register. The boot monitor waits
+		 * until it receives a soft interrupt, and then the
+		 * secondary CPU branches to this address.
+		 */
+	__raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM);
+	}
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c0.c b/arch/arm/mach-s5pv310/setup-i2c0.c
new file mode 100644
index 000000000000..f47f8f3152ec
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c0.c
@@ -0,0 +1,26 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c0.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5PV310_GPD1(0), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c1.c b/arch/arm/mach-s5pv310/setup-i2c1.c
new file mode 100644
index 000000000000..9d07e4e2f14c
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c1.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c1.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C1 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5PV310_GPD1(2), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c2.c b/arch/arm/mach-s5pv310/setup-i2c2.c
new file mode 100644
index 000000000000..4163b1233daf
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c2.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c2.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C2 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c2_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5PV310_GPA0(6), 2,
+			      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c3.c b/arch/arm/mach-s5pv310/setup-i2c3.c
new file mode 100644
index 000000000000..180f153d2a20
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c3.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C3 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c3_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5PV310_GPA1(2), 2,
+			      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c4.c b/arch/arm/mach-s5pv310/setup-i2c4.c
new file mode 100644
index 000000000000..909e8dfc5316
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c4.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c4.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C4 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c4_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5PV310_GPB(2), 2,
+			      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c5.c b/arch/arm/mach-s5pv310/setup-i2c5.c
new file mode 100644
index 000000000000..5d0fa4ac0283
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c5.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c5.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C5 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c5_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5PV310_GPB(6), 2,
+			      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c6.c b/arch/arm/mach-s5pv310/setup-i2c6.c
new file mode 100644
index 000000000000..34aafab92ac4
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c6.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c6.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C6 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c6_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5PV310_GPC1(3), 2,
+			      S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-i2c7.c b/arch/arm/mach-s5pv310/setup-i2c7.c
new file mode 100644
index 000000000000..9b25b8d18920
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-i2c7.c
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-s5pv310/setup-i2c7.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *
+ * I2C7 GPIO configuration.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c7_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgall_range(S5PV310_GPD0(2), 2,
+			      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+}
diff --git a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
new file mode 100644
index 000000000000..86d38cc49135
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
@@ -0,0 +1,152 @@
+/* linux/arch/arm/mach-s5pv310/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+	unsigned int gpio;
+
+	/* Set all the necessary GPK0[0:1] pins to special-function 2 */
+	for (gpio = S5PV310_GPK0(0); gpio < S5PV310_GPK0(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	switch (width) {
+	case 8:
+		for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) {
+			/* Data pin GPK1[3:6] to special-funtion 3 */
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+		}
+	case 4:
+		for (gpio = S5PV310_GPK0(3); gpio <= S5PV310_GPK0(6); gpio++) {
+			/* Data pin GPK0[3:6] to special-funtion 2 */
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+		}
+	default:
+		break;
+	}
+
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_cfgpin(S5PV310_GPK0(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PV310_GPK0(2), S3C_GPIO_PULL_UP);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+}
+
+void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+	unsigned int gpio;
+
+	/* Set all the necessary GPK1[0:1] pins to special-function 2 */
+	for (gpio = S5PV310_GPK1(0); gpio < S5PV310_GPK1(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) {
+		/* Data pin GPK1[3:6] to special-function 2 */
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_cfgpin(S5PV310_GPK1(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PV310_GPK1(2), S3C_GPIO_PULL_UP);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+}
+
+void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+	unsigned int gpio;
+
+	/* Set all the necessary GPK2[0:1] pins to special-function 2 */
+	for (gpio = S5PV310_GPK2(0); gpio < S5PV310_GPK2(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	switch (width) {
+	case 8:
+		for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) {
+			/* Data pin GPK3[3:6] to special-function 3 */
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+		}
+	case 4:
+		for (gpio = S5PV310_GPK2(3); gpio <= S5PV310_GPK2(6); gpio++) {
+			/* Data pin GPK2[3:6] to special-function 2 */
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+			s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+		}
+	default:
+		break;
+	}
+
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_cfgpin(S5PV310_GPK2(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PV310_GPK2(2), S3C_GPIO_PULL_UP);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+}
+
+void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
+{
+	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+	unsigned int gpio;
+
+	/* Set all the necessary GPK3[0:1] pins to special-function 2 */
+	for (gpio = S5PV310_GPK3(0); gpio < S5PV310_GPK3(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) {
+		/* Data pin GPK3[3:6] to special-function 2 */
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+		s3c_gpio_cfgpin(S5PV310_GPK3(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PV310_GPK3(2), S3C_GPIO_PULL_UP);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+}
diff --git a/arch/arm/mach-s5pv310/setup-sdhci.c b/arch/arm/mach-s5pv310/setup-sdhci.c
new file mode 100644
index 000000000000..db8358fc4662
--- /dev/null
+++ b/arch/arm/mach-s5pv310/setup-sdhci.c
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s5pv310/setup-sdhci.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV310 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pv310_hsmmc_clksrcs[4] = {
+	[0] = NULL,
+	[1] = NULL,
+	[2] = "sclk_mmc",	/* mmc_bus */
+	[3] = NULL,
+};
+
+void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
+				  struct mmc_ios *ios, struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	/* don't need to alter anything acording to card-type */
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+
+	/* select base clock source to HCLK */
+
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+
+	/*
+	 * clear async mode, enable conflict mask, rx feedback ctrl, SD
+	 * clk hold and no use debounce count
+	 */
+
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	/* Tx and Rx feedback clock delay control */
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff --git a/arch/arm/mach-s5pv310/time.c b/arch/arm/mach-s5pv310/time.c
new file mode 100644
index 000000000000..01b012ad1bfd
--- /dev/null
+++ b/arch/arm/mach-s5pv310/time.c
@@ -0,0 +1,287 @@
+/* linux/arch/arm/mach-s5pv310/time.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV310 (and compatible) HRT support
+ * PWM 2/4 is used for this feature
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+
+#include <asm/smp_twd.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <asm/mach/time.h>
+
+static unsigned long clock_count_per_tick;
+
+static struct clk *tin2;
+static struct clk *tin4;
+static struct clk *tdiv2;
+static struct clk *tdiv4;
+static struct clk *timerclk;
+
+static void s5pv310_pwm_stop(unsigned int pwm_id)
+{
+	unsigned long tcon;
+
+	tcon = __raw_readl(S3C2410_TCON);
+
+	switch (pwm_id) {
+	case 2:
+		tcon &= ~S3C2410_TCON_T2START;
+		break;
+	case 4:
+		tcon &= ~S3C2410_TCON_T4START;
+		break;
+	default:
+		break;
+	}
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static void s5pv310_pwm_init(unsigned int pwm_id, unsigned long tcnt)
+{
+	unsigned long tcon;
+
+	tcon = __raw_readl(S3C2410_TCON);
+
+	/* timers reload after counting zero, so reduce the count by 1 */
+	tcnt--;
+
+	/* ensure timer is stopped... */
+	switch (pwm_id) {
+	case 2:
+		tcon &= ~(0xf<<12);
+		tcon |= S3C2410_TCON_T2MANUALUPD;
+
+		__raw_writel(tcnt, S3C2410_TCNTB(2));
+		__raw_writel(tcnt, S3C2410_TCMPB(2));
+		__raw_writel(tcon, S3C2410_TCON);
+
+		break;
+	case 4:
+		tcon &= ~(7<<20);
+		tcon |= S3C2410_TCON_T4MANUALUPD;
+
+		__raw_writel(tcnt, S3C2410_TCNTB(4));
+		__raw_writel(tcnt, S3C2410_TCMPB(4));
+		__raw_writel(tcon, S3C2410_TCON);
+
+		break;
+	default:
+		break;
+	}
+}
+
+static inline void s5pv310_pwm_start(unsigned int pwm_id, bool periodic)
+{
+	unsigned long tcon;
+
+	tcon  = __raw_readl(S3C2410_TCON);
+
+	switch (pwm_id) {
+	case 2:
+		tcon |= S3C2410_TCON_T2START;
+		tcon &= ~S3C2410_TCON_T2MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T2RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T2RELOAD;
+		break;
+	case 4:
+		tcon |= S3C2410_TCON_T4START;
+		tcon &= ~S3C2410_TCON_T4MANUALUPD;
+
+		if (periodic)
+			tcon |= S3C2410_TCON_T4RELOAD;
+		else
+			tcon &= ~S3C2410_TCON_T4RELOAD;
+		break;
+	default:
+		break;
+	}
+	__raw_writel(tcon, S3C2410_TCON);
+}
+
+static int s5pv310_pwm_set_next_event(unsigned long cycles,
+					struct clock_event_device *evt)
+{
+	s5pv310_pwm_init(2, cycles);
+	s5pv310_pwm_start(2, 0);
+	return 0;
+}
+
+static void s5pv310_pwm_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	s5pv310_pwm_stop(2);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		s5pv310_pwm_init(2, clock_count_per_tick);
+		s5pv310_pwm_start(2, 1);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device pwm_event_device = {
+	.name		= "pwm_timer2",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 200,
+	.shift		= 32,
+	.set_next_event	= s5pv310_pwm_set_next_event,
+	.set_mode	= s5pv310_pwm_set_mode,
+};
+
+irqreturn_t s5pv310_clock_event_isr(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &pwm_event_device;
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction s5pv310_clock_event_irq = {
+	.name		= "pwm_timer2_irq",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= s5pv310_clock_event_isr,
+};
+
+static void __init s5pv310_clockevent_init(void)
+{
+	unsigned long pclk;
+	unsigned long clock_rate;
+	struct clk *tscaler;
+
+	pclk = clk_get_rate(timerclk);
+
+	/* configure clock tick */
+
+	tscaler = clk_get_parent(tdiv2);
+
+	clk_set_rate(tscaler, pclk / 2);
+	clk_set_rate(tdiv2, pclk / 2);
+	clk_set_parent(tin2, tdiv2);
+
+	clock_rate = clk_get_rate(tin2);
+
+	clock_count_per_tick = clock_rate / HZ;
+
+	pwm_event_device.mult =
+		div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift);
+	pwm_event_device.max_delta_ns =
+		clockevent_delta2ns(-1, &pwm_event_device);
+	pwm_event_device.min_delta_ns =
+		clockevent_delta2ns(1, &pwm_event_device);
+
+	pwm_event_device.cpumask = cpumask_of(0);
+	clockevents_register_device(&pwm_event_device);
+
+	setup_irq(IRQ_TIMER2, &s5pv310_clock_event_irq);
+}
+
+static cycle_t s5pv310_pwm4_read(struct clocksource *cs)
+{
+	return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
+}
+
+struct clocksource pwm_clocksource = {
+	.name		= "pwm_timer4",
+	.rating		= 250,
+	.read		= s5pv310_pwm4_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS ,
+};
+
+static void __init s5pv310_clocksource_init(void)
+{
+	unsigned long pclk;
+	unsigned long clock_rate;
+
+	pclk = clk_get_rate(timerclk);
+
+	clk_set_rate(tdiv4, pclk / 2);
+	clk_set_parent(tin4, tdiv4);
+
+	clock_rate = clk_get_rate(tin4);
+
+	s5pv310_pwm_init(4, ~0);
+	s5pv310_pwm_start(4, 1);
+
+	pwm_clocksource.mult =
+		clocksource_khz2mult(clock_rate/1000, pwm_clocksource.shift);
+
+	if (clocksource_register(&pwm_clocksource))
+		panic("%s: can't register clocksource\n", pwm_clocksource.name);
+}
+
+static void __init s5pv310_timer_resources(void)
+{
+	struct platform_device tmpdev;
+
+	tmpdev.dev.bus = &platform_bus_type;
+
+	timerclk = clk_get(NULL, "timers");
+	if (IS_ERR(timerclk))
+		panic("failed to get timers clock for system timer");
+
+	clk_enable(timerclk);
+
+	tmpdev.id = 2;
+	tin2 = clk_get(&tmpdev.dev, "pwm-tin");
+	if (IS_ERR(tin2))
+		panic("failed to get pwm-tin2 clock for system timer");
+
+	tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv");
+	if (IS_ERR(tdiv2))
+		panic("failed to get pwm-tdiv2 clock for system timer");
+	clk_enable(tin2);
+
+	tmpdev.id = 4;
+	tin4 = clk_get(&tmpdev.dev, "pwm-tin");
+	if (IS_ERR(tin4))
+		panic("failed to get pwm-tin4 clock for system timer");
+
+	tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv");
+	if (IS_ERR(tdiv4))
+		panic("failed to get pwm-tdiv4 clock for system timer");
+
+	clk_enable(tin4);
+}
+
+static void __init s5pv310_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+	twd_base = S5P_VA_TWD;
+#endif
+
+	s5pv310_timer_resources();
+	s5pv310_clockevent_init();
+	s5pv310_clocksource_init();
+}
+
+struct sys_timer s5pv310_timer = {
+	.init		= s5pv310_timer_init,
+};
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index fd4c52b7ccb6..5da8c35aa0de 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -90,8 +90,8 @@ config SA1100_JORNADA720
 	# FIXME: select CPU_FREQ_SA11x0
 	help
 	  Say Y here if you want to build a kernel for the HP Jornada 720
-	  handheld computer.  See <http://www.hp.com/jornada/products/720>
-	  for details.
+	  handheld computer.  See 
+	  <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#> 
 
 config SA1100_JORNADA720_SSP
 	bool "HP Jornada 720 Extended SSP driver"
@@ -145,7 +145,7 @@ config SA1100_SIMPAD
 	  FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
 	  PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
 	  like CL4 in additional it has a PCMCIA-Slot. For more information
-	  visit <http://www.my-siemens.com/> or <http://www.siemens.ch/>.
+	  visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
 
 config SA1100_SSP
 	tristate "Generic PIO SSP"
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 169e5b87dbff..5778274a8260 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -447,8 +447,6 @@ static void __init assabet_map_io(void)
 
 
 MACHINE_START(ASSABET, "Intel-Assabet")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.fixup		= fixup_assabet,
 	.map_io		= assabet_map_io,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 259cb2c15fff..4f19ff868b00 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -302,8 +302,6 @@ static void __init badge4_map_io(void)
 }
 
 MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= badge4_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index bc950ef418af..98d780608c7e 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -135,8 +135,6 @@ static void __init cerf_init(void)
 
 MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
 	/* Maintainer: support@intrinsyc.com */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.map_io		= cerf_map_io,
 	.init_irq	= cerf_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 5d5f330c5d94..d43c5ef58eb6 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  *
  * ChangeLog:
- *  2006 Pavel Machek <pavel@suse.cz>
+ *  2006 Pavel Machek <pavel@ucw.cz>
  *  03-06-2004 John Lenz <lenz@cs.wisc.edu>
  *  06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
  *  04-16-2001 Lineo Japan,Inc. ...
@@ -379,8 +379,6 @@ static void __init collie_map_io(void)
 }
 
 MACHINE_START(COLLIE, "Sharp-Collie")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.map_io		= collie_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index ef817876a5d6..96f7dc103b59 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -13,7 +13,7 @@
  * This software has been developed while working on the LART
  * computing board (http://www.lartmaker.nl/), which is
  * sponsored by the Mobile Multi-media Communications
- * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications
+ * (http://www.mobimedia.org/) and Ubiquitous Communications
  * (http://www.ubicom.tudelft.nl/) projects.
  *
  * The authors can be reached at:
@@ -184,16 +184,15 @@ static int sa1100_target(struct cpufreq_policy *policy,
 {
 	unsigned int cur = sa11x0_getspeed(0);
 	unsigned int new_ppcr;
-
 	struct cpufreq_freqs freqs;
+
+	new_ppcr = sa11x0_freq_to_ppcr(target_freq);
 	switch(relation){
 	case CPUFREQ_RELATION_L:
-		new_ppcr = sa11x0_freq_to_ppcr(target_freq);
 		if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max)
 			new_ppcr--;
 		break;
 	case CPUFREQ_RELATION_H:
-		new_ppcr = sa11x0_freq_to_ppcr(target_freq);
 		if ((sa11x0_ppcr_to_freq(new_ppcr) > target_freq) &&
 		    (sa11x0_ppcr_to_freq(new_ppcr - 1) >= policy->min))
 			new_ppcr--;
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index ec03f187c52b..b7a9a601c2d1 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -13,8 +13,7 @@ extern void __init sa1100_init_gpio(void);
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
-	mi->bank[__nr].size = (__size), \
-	mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
+	mi->bank[__nr].size = (__size)
 
 extern void (*sa1100fb_backlight_power)(int on);
 extern void (*sa1100fb_lcd_power)(int on);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 0c7cea0dc013..03d7376cf8a0 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -84,8 +84,6 @@ static void __init h3100_mach_init(void)
 }
 
 MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= h3100_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index af3b71459f8d..965f64a836f8 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -125,8 +125,6 @@ static void __init h3600_mach_init(void)
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= h3600_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 51568dfc8e97..db5e434a17db 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -195,8 +195,6 @@ static void __init hackkit_init(void)
  */
 
 MACHINE_START(HACKKIT, "HackKit Cpu Board")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= hackkit_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 336adccea542..0cd0fc9635b6 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,33 +12,37 @@
 */
 #include <mach/hardware.h>
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000	@ physical base address
-		movne	\rx, #0xf8000000	@ virtual address
+		.macro	addruart, rp, rv
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		moveq	\rp, #0x80000000	@ physical base address
+		movne	\rp, #0xf8000000	@ virtual address
 
 		@ We probe for the active serial port here, coherently with
 		@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
 		@ We assume r1 can be clobbered.
 
 		@ see if Ser3 is active
-		add	\rx, \rx, #0x00050000
-		ldr	r1, [\rx, #UTCR3]
-		tst	r1, #UTCR3_TXE
+		add	\rp, \rp, #0x00050000
+		ldr	\rv, [\rp, #UTCR3]
+		tst	\rv, #UTCR3_TXE
 
 		@ if Ser3 is inactive, then try Ser1
-		addeq	\rx, \rx, #(0x00010000 - 0x00050000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
+		addeq	\rp, \rp, #(0x00010000 - 0x00050000)
+		ldreq	\rv, [\rp, #UTCR3]
+		tsteq	\rv, #UTCR3_TXE
 
 		@ if Ser1 is inactive, then try Ser2
-		addeq	\rx, \rx, #(0x00030000 - 0x00010000)
-		ldreq	r1, [\rx, #UTCR3]
-		tsteq	r1, #UTCR3_TXE
+		addeq	\rp, \rp, #(0x00030000 - 0x00010000)
+		ldreq	\rv, [\rp, #UTCR3]
+		tsteq	\rv, #UTCR3_TXE
+
+		@ clear top bits, and generate both phys and virt addresses
+		lsl	\rp, \rp, #8
+		lsr	\rp, \rp, #8
+		orr	\rv, \rp, #0xf8000000	@ virtual
+		orr	\rp, \rp, #0x80000000	@ physical
 
-		@ if all ports are inactive, then there is nothing we can do
-		moveq	pc, lr
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index 8c8845b5ae5b..d18f21abef80 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -77,7 +77,7 @@
  */
 #ifdef CONFIG_SA1111
 #define NR_IRQS			(IRQ_BOARD_END + 55)
-#elif defined(CONFIG_SHARPSL_LOCOMO)
+#elif defined(CONFIG_SHARP_LOCOMO)
 #define NR_IRQS			(IRQ_BOARD_START + 4)
 #else
 #define NR_IRQS			(IRQ_BOARD_START)
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index d5277f9bee77..128a1dfa96b9 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -17,10 +17,10 @@
 #ifndef __ASSEMBLY__
 
 #ifdef CONFIG_SA1111
-void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+void sa1111_adjust_zones(unsigned long *size, unsigned long *holes);
 
-#define arch_adjust_zones(node, size, holes) \
-	sa1111_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	sa1111_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_1M)
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index d3ec620618f1..491ac9f20fb4 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -364,8 +364,6 @@ static void __init jornada720_mach_init(void)
 
 MACHINE_START(JORNADA720, "HP Jornada 720")
 	/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= jornada720_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 68069d6dc07a..7b9556b59057 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -61,8 +61,6 @@ static void __init lart_map_io(void)
 }
 
 MACHINE_START(LART, "LART")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= lart_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 1ccd6018d3a3..42b80400c100 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -146,8 +146,6 @@ static void __init pleb_map_io(void)
 }
 
 MACHINE_START(PLEB, "PLEB")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.map_io		= pleb_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 85e82bb73d7e..7917b2405579 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -82,8 +82,6 @@ static void __init shannon_map_io(void)
 }
 
 MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= shannon_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 49cfd64663ac..27692d0ffbe8 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -228,8 +228,6 @@ arch_initcall(simpad_init);
 
 MACHINE_START(SIMPAD, "Simpad")
 	/* Maintainer: Holger Freyther */
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
 	.boot_params	= 0xc0000100,
 	.map_io		= simpad_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 358d875ace14..5cf7f94c1f31 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -152,8 +152,6 @@ static struct sys_timer shark_timer = {
 
 MACHINE_START(SHARK, "Shark")
 	/* Maintainer: Alexander Schulz */
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x08003000,
 	.map_io		= shark_map_io,
 	.init_irq	= shark_init_irq,
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 5ea24d4d1ba6..a473f55dc71f 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mov	\rx, #0xe0000000
-		orr	\rx, \rx, #0x000003f8
+		.macro	addruart, rp, rv
+		mov	\rp, #0xe0000000
+		orr	\rp, \rp, #0x000003f8
+		mov	\rv, \rp
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
index 3053e5b7f168..d9c4812f1c31 100644
--- a/arch/arm/mach-shark/include/mach/memory.h
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -19,9 +19,8 @@
 
 #ifndef __ASSEMBLY__
 
-static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) 
+static inline void __arch_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size)
 {
-  if (node != 0) return;
   /* Only the first 4 MB (=1024 Pages) are usable for DMA */
   /* See dev / -> .properties in OpenFirmware. */
   zone_size[1] = zone_size[0] - 1024;
@@ -30,8 +29,8 @@ static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsig
   zhole_size[0] = 0;
 }
 
-#define arch_adjust_zones(node, size, holes) \
-	__arch_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	__arch_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_4M)
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
index f6c6837c5451..8e845b6a7cb5 100644
--- a/arch/arm/mach-shark/include/mach/vmalloc.h
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
 /*
  * arch/arm/mach-shark/include/mach/vmalloc.h
  */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END       0xd0000000
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index f2b88c5fe142..54b479c35ee0 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -7,6 +7,7 @@ config ARCH_SH7367
 	select CPU_V6
 	select HAVE_CLK
 	select COMMON_CLKDEV
+	select SH_CLK_CPG
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_SH7377
@@ -14,6 +15,7 @@ config ARCH_SH7377
 	select CPU_V7
 	select HAVE_CLK
 	select COMMON_CLKDEV
+	select SH_CLK_CPG
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_SH7372
@@ -21,6 +23,7 @@ config ARCH_SH7372
 	select CPU_V7
 	select HAVE_CLK
 	select COMMON_CLKDEV
+	select SH_CLK_CPG
 	select GENERIC_CLOCKEVENTS
 
 comment "SH-Mobile Board Type"
@@ -39,6 +42,20 @@ config MACH_AP4EVB
 	bool "AP4EVB board"
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
+	select SH_LCD_MIPI_DSI
+
+choice
+	prompt "AP4EVB LCD panel selection"
+	default AP4EVB_QHD
+	depends on MACH_AP4EVB
+
+config AP4EVB_QHD
+	bool "MIPI-DSI QHD (960x540)"
+
+config AP4EVB_WVGA
+	bool "Parallel WVGA (800x480)"
+
+endchoice
 
 comment "SH-Mobile System Configuration"
 
@@ -70,12 +87,33 @@ endmenu
 
 menu "Timer and clock configuration"
 
+config SHMOBILE_TIMER_HZ
+	int "Kernel HZ (jiffies per second)"
+	range 32 1024
+	default "128"
+	help
+	  Allows the configuration of the timer frequency. It is customary
+	  to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
+	  case of low timer frequencies other values may be more suitable.
+	  SH-Mobile systems using a 32768 Hz RCLK for clock events may want
+	  to select a HZ value such as 128 that can evenly divide RCLK.
+	  A HZ value that does not divide evenly may cause timer drift.
+
 config SH_TIMER_CMT
 	bool "CMT timer driver"
 	default y
 	help
 	  This enables build of the CMT timer driver.
 
+config SH_TIMER_TMU
+	bool "TMU timer driver"
+	default y
+	help
+	  This enables build of the TMU timer driver.
+
 endmenu
 
+config SH_CLK_CPG
+	bool
+
 endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 6d385d371c33..ae416fe7daf2 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,12 +3,12 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o
+obj-y				:= timer.o console.o clock.o pm_runtime.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
-obj-$(CONFIG_ARCH_SH7377)	+= setup-sh7377.o clock-sh7367.o intc-sh7377.o
-obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7367.o intc-sh7372.o
+obj-$(CONFIG_ARCH_SH7377)	+= setup-sh7377.o clock-sh7377.o intc-sh7377.o
+obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
 
 # Pinmux setup
 pfc-$(CONFIG_ARCH_SH7367)	:= pfc-sh7367.o
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 1c2ec96ce261..46ca4d4abf91 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -17,25 +17,50 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
+#include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/usb/r8a66597.h>
+
+#include <media/sh_mobile_ceu.h>
+#include <media/sh_mobile_csi2.h>
+#include <media/soc_camera.h>
+
+#include <sound/sh_fsi.h>
+
+#include <video/sh_mobile_hdmi.h>
+#include <video/sh_mobile_lcdc.h>
+#include <video/sh_mipi_dsi.h>
+
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/sh7372.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/time.h>
 
 /*
  * Address	Interface		BusWidth	note
@@ -80,12 +105,56 @@
  */
 
 /*
- * KEYSC
+ * LCD / IRQ / KEYSC / IrDA
+ *
+ * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (QHD-TouchScreen)
+ * LCD = 2nd LCDC (WVGA)
+ *
+ * 		|		SW43			|
+ * SW3		|	ON		|	OFF	|
+ * -------------+-----------------------+---------------+
+ * ON		| KEY / IrDA		| LCD		|
+ * OFF		| KEY / IrDA / IRQ	| IRQ		|
+ *
+ *
+ * QHD / WVGA display
+ *
+ * You can choice display type on menuconfig.
+ * Then, check above dip-switch.
+ */
+
+/*
+ * USB
+ *
+ * J7 : 1-2  MAX3355E VBUS
+ *      2-3  DC 5.0V
+ *
+ * S39: bit2: off
+ */
+
+/*
+ * FSI/FSMI
+ *
+ * SW41	:  ON : SH-Mobile AP4 Audio Mode
+ *	: OFF : Bluetooth Audio Mode
+ */
+
+/*
+ * MMC0/SDHI1 (CN7)
+ *
+ * J22 : select card voltage
+ *       1-2 pin : 1.8v
+ *       2-3 pin : 3.3v
  *
- * SW43		KEYSC
- * -------------------------
- * ON		enable
- * OFF		disable
+ *        SW1  |             SW33
+ *             | bit1 | bit2 | bit3 | bit4
+ * ------------+------+------+------+-------
+ * MMC0   OFF  |  OFF |  ON  |  ON  |  X
+ * SDHI1  OFF  |  ON  |   X  |  OFF | ON
+ *
+ * voltage lebel
+ * CN7 : 1.8v
+ * CN12: 3.3v
  */
 
 /* MTD */
@@ -148,7 +217,7 @@ static struct resource smc911x_resources[] = {
 		.end	= 0x16000000 - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.start	= 6,
+		.start	= evt2irq(0x02c0) /* IRQ6A */,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
@@ -169,6 +238,226 @@ static struct platform_device smc911x_device = {
 	},
 };
 
+/*
+ * The card detect pin of the top SD/MMC slot (CN7) is active low and is
+ * connected to GPIO A22 of SH7372 (GPIO_PORT41).
+ */
+static int slot_cn7_get_cd(struct platform_device *pdev)
+{
+	if (gpio_is_valid(GPIO_PORT41))
+		return !gpio_get_value(GPIO_PORT41);
+	else
+		return -ENXIO;
+}
+
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "MMCIF",
+		.start	= 0xE6BD0000,
+		.end	= 0xE6BD00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC ERR */
+		.start	= evt2irq(0x1ac0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC NOR */
+		.start	= evt2irq(0x1ae0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0,
+	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+	.get_cd		= slot_cn7_get_cd,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0xe6850000,
+		.end    = 0xe68501ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x0e00) /* SDHI0 */,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
+	.tmio_ocr_mask	= MMC_VDD_165_195,
+	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_caps	= MMC_CAP_NEEDS_POLL,
+	.get_cd		= slot_cn7_get_cd,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0xe6860000,
+		.end    = 0xe68601ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x0e80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi1_resources),
+	.resource       = sdhi1_resources,
+	.id             = 1,
+	.dev	= {
+		.platform_data	= &sdhi1_info,
+	},
+};
+
+/* USB1 */
+static void usb1_host_port_power(int port, int power)
+{
+	if (!power) /* only power-on supported for now */
+		return;
+
+	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
+	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
+}
+
+static struct r8a66597_platdata usb1_host_data = {
+	.on_chip	= 1,
+	.port_power	= usb1_host_port_power,
+};
+
+static struct resource usb1_host_resources[] = {
+	[0] = {
+		.name	= "USBHS",
+		.start	= 0xE68B0000,
+		.end	= 0xE68B00E6 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb1_host_device = {
+	.name	= "r8a66597_hcd",
+	.id	= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb1_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb1_host_resources),
+	.resource	= usb1_host_resources,
+};
+
+const static struct fb_videomode ap4evb_lcdc_modes[] = {
+	{
+#ifdef CONFIG_AP4EVB_QHD
+		.name		= "R63302(QHD)",
+		.xres		= 544,
+		.yres		= 961,
+		.left_margin	= 72,
+		.right_margin	= 600,
+		.hsync_len	= 16,
+		.upper_margin	= 8,
+		.lower_margin	= 8,
+		.vsync_len	= 2,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+#else
+		.name		= "WVGA Panel",
+		.xres		= 800,
+		.yres		= 480,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 70,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+		.sync		= 0,
+#endif
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.lcd_cfg = ap4evb_lcdc_modes,
+		.num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes),
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev	= {
+		.platform_data	= &lcdc_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/*
+ * QHD display
+ */
+#ifdef CONFIG_AP4EVB_QHD
+
 /* KEYSC (Needs SW43 set to ON) */
 static struct sh_keysc_info keysc_info = {
 	.mode		= SH_KEYSC_MODE_1,
@@ -191,7 +480,7 @@ static struct resource keysc_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 79,
+		.start  = evt2irq(0x0be0), /* KEYSC_KEY */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -206,32 +495,478 @@ static struct platform_device keysc_device = {
 	},
 };
 
-/* SDHI0 */
-static struct resource sdhi0_resources[] = {
+/* MIPI-DSI */
+static struct resource mipidsi0_resources[] = {
 	[0] = {
-		.name	= "SDHI0",
-		.start  = 0xe6850000,
-		.end    = 0xe68501ff,
+		.start  = 0xffc60000,
+		.end    = 0xffc68fff,
 		.flags  = IORESOURCE_MEM,
 	},
+};
+
+static struct sh_mipi_dsi_info mipidsi0_info = {
+	.data_format	= MIPI_RGB888,
+	.lcd_chan	= &lcdc_info.ch[0],
+};
+
+static struct platform_device mipidsi0_device = {
+	.name           = "sh-mipi-dsi",
+	.num_resources  = ARRAY_SIZE(mipidsi0_resources),
+	.resource       = mipidsi0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &mipidsi0_info,
+	},
+};
+
+/* This function will disappear when we switch to (runtime) PM */
+static int __init ap4evb_init_display_clk(void)
+{
+	struct clk *lcdc_clk;
+	struct clk *dsitx_clk;
+	int ret;
+
+	lcdc_clk = clk_get(&lcdc_device.dev, "sh_mobile_lcdc_fb.0");
+	if (IS_ERR(lcdc_clk))
+		return PTR_ERR(lcdc_clk);
+
+	dsitx_clk = clk_get(&mipidsi0_device.dev, "sh-mipi-dsi.0");
+	if (IS_ERR(dsitx_clk)) {
+		ret = PTR_ERR(dsitx_clk);
+		goto eclkdsitxget;
+	}
+
+	ret = clk_enable(lcdc_clk);
+	if (ret < 0)
+		goto eclklcdcon;
+
+	ret = clk_enable(dsitx_clk);
+	if (ret < 0)
+		goto eclkdsitxon;
+
+	return 0;
+
+eclkdsitxon:
+	clk_disable(lcdc_clk);
+eclklcdcon:
+	clk_put(dsitx_clk);
+eclkdsitxget:
+	clk_put(lcdc_clk);
+
+	return ret;
+}
+device_initcall(ap4evb_init_display_clk);
+
+static struct platform_device *qhd_devices[] __initdata = {
+	&mipidsi0_device,
+	&keysc_device,
+};
+#endif /* CONFIG_AP4EVB_QHD */
+
+/* FSI */
+#define IRQ_FSI		evt2irq(0x1840)
+static struct sh_fsi_platform_info fsi_info = {
+	.porta_flags = SH_FSI_BRS_INV |
+		       SH_FSI_OUT_SLAVE_MODE |
+		       SH_FSI_IN_SLAVE_MODE |
+		       SH_FSI_OFMT(PCM) |
+		       SH_FSI_IFMT(PCM),
+};
+
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C0400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
 	[1] = {
-		.start  = 96,
+		.start  = IRQ_FSI,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device sdhi0_device = {
-	.name           = "sh_mobile_sdhi",
-	.num_resources  = ARRAY_SIZE(sdhi0_resources),
-	.resource       = sdhi0_resources,
-	.id             = 0,
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi2",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+	.dev	= {
+		.platform_data	= &fsi_info,
+	},
+};
+
+static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB24,
+		.clock_divider = 1,
+		.flags = LCDC_FLAGS_DWPOL,
+	}
+};
+
+static struct resource lcdc1_resources[] = {
+	[0] = {
+		.name	= "LCDC1",
+		.start	= 0xfe944000,
+		.end	= 0xfe947fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x1780),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc1_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc1_resources),
+	.resource	= lcdc1_resources,
+	.id             = 1,
+	.dev	= {
+		.platform_data	= &sh_mobile_lcdc1_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+static struct sh_mobile_hdmi_info hdmi_info = {
+	.lcd_chan = &sh_mobile_lcdc1_info.ch[0],
+	.lcd_dev = &lcdc1_device.dev,
+};
+
+static struct resource hdmi_resources[] = {
+	[0] = {
+		.name	= "HDMI",
+		.start	= 0xe6be0000,
+		.end	= 0xe6be00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* There's also an HDMI interrupt on INTCS @ 0x18e0 */
+		.start	= evt2irq(0x17e0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device hdmi_device = {
+	.name		= "sh-mobile-hdmi",
+	.num_resources	= ARRAY_SIZE(hdmi_resources),
+	.resource	= hdmi_resources,
+	.id             = -1,
+	.dev	= {
+		.platform_data	= &hdmi_info,
+	},
+};
+
+static struct gpio_led ap4evb_leds[] = {
+	{
+		.name			= "led4",
+		.gpio			= GPIO_PORT185,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led2",
+		.gpio			= GPIO_PORT186,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led3",
+		.gpio			= GPIO_PORT187,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led1",
+		.gpio			= GPIO_PORT188,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	}
+};
+
+static struct gpio_led_platform_data ap4evb_leds_pdata = {
+	.num_leds = ARRAY_SIZE(ap4evb_leds),
+	.leds = ap4evb_leds,
+};
+
+static struct platform_device leds_device = {
+	.name = "leds-gpio",
+	.id = 0,
+	.dev = {
+		.platform_data  = &ap4evb_leds_pdata,
+	},
+};
+
+static struct i2c_board_info imx074_info = {
+	I2C_BOARD_INFO("imx074", 0x1a),
+};
+
+struct soc_camera_link imx074_link = {
+	.bus_id		= 0,
+	.board_info	= &imx074_info,
+	.i2c_adapter_id	= 0,
+	.module_name	= "imx074",
+};
+
+static struct platform_device ap4evb_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &imx074_link,
+	},
+};
+
+static struct sh_csi2_client_config csi2_clients[] = {
+	{
+		.phy		= SH_CSI2_PHY_MAIN,
+		.lanes		= 3,
+		.channel	= 0,
+		.pdev		= &ap4evb_camera,
+	},
+};
+
+static struct sh_csi2_pdata csi2_info = {
+	.type		= SH_CSI2C,
+	.clients	= csi2_clients,
+	.num_clients	= ARRAY_SIZE(csi2_clients),
+	.flags		= SH_CSI2_ECC | SH_CSI2_CRC,
+};
+
+static struct resource csi2_resources[] = {
+	[0] = {
+		.name	= "CSI2",
+		.start	= 0xffc90000,
+		.end	= 0xffc90fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x17a0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device csi2_device = {
+	.name   = "sh-mobile-csi2",
+	.id     = 0,
+	.num_resources	= ARRAY_SIZE(csi2_resources),
+	.resource	= csi2_resources,
+	.dev    = {
+		.platform_data = &csi2_info,
+	},
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+	.csi2_dev = &csi2_device.dev,
+};
+
+static struct resource ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu_resources),
+	.resource	= ceu_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
 };
 
 static struct platform_device *ap4evb_devices[] __initdata = {
+	&leds_device,
 	&nor_flash_device,
 	&smc911x_device,
-	&keysc_device,
 	&sdhi0_device,
+	&sdhi1_device,
+	&usb1_host_device,
+	&fsi_device,
+	&sh_mmcif_device,
+	&lcdc1_device,
+	&lcdc_device,
+	&hdmi_device,
+	&csi2_device,
+	&ceu_device,
+	&ap4evb_camera,
+};
+
+static int __init hdmi_init_pm_clock(void)
+{
+	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
+	int ret;
+	long rate;
+
+	if (IS_ERR(hdmi_ick)) {
+		ret = PTR_ERR(hdmi_ick);
+		pr_err("Cannot get HDMI ICK: %d\n", ret);
+		goto out;
+	}
+
+	ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
+	if (ret < 0) {
+		pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount);
+		goto out;
+	}
+
+	pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk));
+
+	rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
+	if (rate < 0) {
+		pr_err("Cannot get suitable rate: %ld\n", rate);
+		ret = rate;
+		goto out;
+	}
+
+	ret = clk_set_rate(&sh7372_pllc2_clk, rate);
+	if (ret < 0) {
+		pr_err("Cannot set rate %ld: %d\n", rate, ret);
+		goto out;
+	}
+
+	pr_debug("PLLC2 set frequency %lu\n", rate);
+
+	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
+	if (ret < 0) {
+		pr_err("Cannot set HDMI parent: %d\n", ret);
+		goto out;
+	}
+
+out:
+	if (!IS_ERR(hdmi_ick))
+		clk_put(hdmi_ick);
+	return ret;
+}
+
+device_initcall(hdmi_init_pm_clock);
+
+#define FSIACK_DUMMY_RATE 48000
+static int __init fsi_init_pm_clock(void)
+{
+	struct clk *fsia_ick;
+	int ret;
+
+	/*
+	 * FSIACK is connected to AK4642,
+	 * and the rate is depend on playing sound rate.
+	 * So, set dummy rate (= 48k) here
+	 */
+	ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
+	if (ret < 0) {
+		pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
+		return ret;
+	}
+
+	fsia_ick = clk_get(&fsi_device.dev, "icka");
+	if (IS_ERR(fsia_ick)) {
+		ret = PTR_ERR(fsia_ick);
+		pr_err("Cannot get FSI ICK: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
+	if (ret < 0) {
+		pr_err("Cannot set FSI-A parent: %d\n", ret);
+		goto out;
+	}
+
+	ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
+	if (ret < 0)
+		pr_err("Cannot set FSI-A rate: %d\n", ret);
+
+out:
+	clk_put(fsia_ick);
+
+	return ret;
+}
+device_initcall(fsi_init_pm_clock);
+
+/*
+ * FIXME !!
+ *
+ * gpio_no_direction
+ * are quick_hack.
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static void __init gpio_no_direction(u32 addr)
+{
+	__raw_writeb(0x00, addr);
+}
+
+/* TouchScreen */
+#ifdef CONFIG_AP4EVB_QHD
+# define GPIO_TSC_IRQ	GPIO_FN_IRQ28_123
+# define GPIO_TSC_PORT	GPIO_PORT123
+#else /* WVGA */
+# define GPIO_TSC_IRQ	GPIO_FN_IRQ7_40
+# define GPIO_TSC_PORT	GPIO_PORT40
+#endif
+
+#define IRQ28	evt2irq(0x3380) /* IRQ28A */
+#define IRQ7	evt2irq(0x02e0) /* IRQ7A */
+static int ts_get_pendown_state(void)
+{
+	int val;
+
+	gpio_free(GPIO_TSC_IRQ);
+
+	gpio_request(GPIO_TSC_PORT, NULL);
+
+	gpio_direction_input(GPIO_TSC_PORT);
+
+	val = gpio_get_value(GPIO_TSC_PORT);
+
+	gpio_request(GPIO_TSC_IRQ, NULL);
+
+	return !val;
+}
+
+static int ts_init(void)
+{
+	gpio_request(GPIO_TSC_IRQ, NULL);
+
+	return 0;
+}
+
+static struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+	.init_platform_hw	= ts_init,
+};
+
+static struct i2c_board_info tsc_device = {
+	I2C_BOARD_INFO("tsc2007", 0x48),
+	.type		= "tsc2007",
+	.platform_data	= &tsc2007_info,
+	/*.irq is selected on ap4evb_init */
+};
+
+/* I2C */
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("ak4643", 0x13),
+	},
+};
+
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
 };
 
 static struct map_desc ap4evb_io_desc[] __initdata = {
@@ -250,14 +985,18 @@ static void __init ap4evb_map_io(void)
 {
 	iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
 
-	/* setup early devices, clocks and console here as well */
+	/* setup early devices and console here as well */
 	sh7372_add_early_devices();
-	sh7367_clock_init(); /* use g3 clocks for now */
 	shmobile_setup_console();
 }
 
+#define GPIO_PORT9CR	0xE6051009
+#define GPIO_PORT10CR	0xE605100A
 static void __init ap4evb_init(void)
 {
+	u32 srcr4;
+	struct clk *clk;
+
 	sh7372_pinmux_init();
 
 	/* enable SCIFA0 */
@@ -268,20 +1007,6 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_CS5A,	NULL);
 	gpio_request(GPIO_FN_IRQ6_39,	NULL);
 
-	/* enable LED 1 - 4 */
-	gpio_request(GPIO_PORT185, NULL);
-	gpio_request(GPIO_PORT186, NULL);
-	gpio_request(GPIO_PORT187, NULL);
-	gpio_request(GPIO_PORT188, NULL);
-	gpio_direction_output(GPIO_PORT185, 1);
-	gpio_direction_output(GPIO_PORT186, 1);
-	gpio_direction_output(GPIO_PORT187, 1);
-	gpio_direction_output(GPIO_PORT188, 1);
-	gpio_export(GPIO_PORT185, 0);
-	gpio_export(GPIO_PORT186, 0);
-	gpio_export(GPIO_PORT187, 0);
-	gpio_export(GPIO_PORT188, 0);
-
 	/* enable Debug switch (S6) */
 	gpio_request(GPIO_PORT32, NULL);
 	gpio_request(GPIO_PORT33, NULL);
@@ -296,6 +1021,91 @@ static void __init ap4evb_init(void)
 	gpio_export(GPIO_PORT34, 0);
 	gpio_export(GPIO_PORT35, 0);
 
+	/* SDHI0 */
+	gpio_request(GPIO_FN_SDHICD0, NULL);
+	gpio_request(GPIO_FN_SDHIWP0, NULL);
+	gpio_request(GPIO_FN_SDHICMD0, NULL);
+	gpio_request(GPIO_FN_SDHICLK0, NULL);
+	gpio_request(GPIO_FN_SDHID0_3, NULL);
+	gpio_request(GPIO_FN_SDHID0_2, NULL);
+	gpio_request(GPIO_FN_SDHID0_1, NULL);
+	gpio_request(GPIO_FN_SDHID0_0, NULL);
+
+	/* SDHI1 */
+	gpio_request(GPIO_FN_SDHICMD1, NULL);
+	gpio_request(GPIO_FN_SDHICLK1, NULL);
+	gpio_request(GPIO_FN_SDHID1_3, NULL);
+	gpio_request(GPIO_FN_SDHID1_2, NULL);
+	gpio_request(GPIO_FN_SDHID1_1, NULL);
+	gpio_request(GPIO_FN_SDHID1_0, NULL);
+
+	/* MMCIF */
+	gpio_request(GPIO_FN_MMCD0_0, NULL);
+	gpio_request(GPIO_FN_MMCD0_1, NULL);
+	gpio_request(GPIO_FN_MMCD0_2, NULL);
+	gpio_request(GPIO_FN_MMCD0_3, NULL);
+	gpio_request(GPIO_FN_MMCD0_4, NULL);
+	gpio_request(GPIO_FN_MMCD0_5, NULL);
+	gpio_request(GPIO_FN_MMCD0_6, NULL);
+	gpio_request(GPIO_FN_MMCD0_7, NULL);
+	gpio_request(GPIO_FN_MMCCMD0, NULL);
+	gpio_request(GPIO_FN_MMCCLK0, NULL);
+
+	/* USB enable */
+	gpio_request(GPIO_FN_VBUS0_1,    NULL);
+	gpio_request(GPIO_FN_IDIN_1_18,  NULL);
+	gpio_request(GPIO_FN_PWEN_1_115, NULL);
+	gpio_request(GPIO_FN_OVCN_1_114, NULL);
+	gpio_request(GPIO_FN_EXTLP_1,    NULL);
+	gpio_request(GPIO_FN_OVCN2_1,    NULL);
+
+	/* setup USB phy */
+	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR2 */
+
+	/* enable FSI2 */
+	gpio_request(GPIO_FN_FSIAIBT,	NULL);
+	gpio_request(GPIO_FN_FSIAILR,	NULL);
+	gpio_request(GPIO_FN_FSIAISLD,	NULL);
+	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
+	gpio_request(GPIO_PORT161,	NULL);
+	gpio_direction_output(GPIO_PORT161, 0); /* slave */
+
+	gpio_request(GPIO_PORT9, NULL);
+	gpio_request(GPIO_PORT10, NULL);
+	gpio_no_direction(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
+	gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+
+	/* card detect pin for MMC slot (CN7) */
+	gpio_request(GPIO_PORT41, NULL);
+	gpio_direction_input(GPIO_PORT41);
+
+	/* set SPU2 clock to 119.6 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 119600000));
+		clk_put(clk);
+	}
+
+	/*
+	 * set irq priority, to avoid sound chopping
+	 * when NFS rootfs is used
+	 *  FSI(3) > SMSC911X(2)
+	 */
+	intc_set_priority(IRQ_FSI, 3);
+
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
+
+#ifdef CONFIG_AP4EVB_QHD
+
+	/*
+	 * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and
+	 * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON.
+	 */
+
 	/* enable KEYSC */
 	gpio_request(GPIO_FN_KEYOUT0, NULL);
 	gpio_request(GPIO_FN_KEYOUT1, NULL);
@@ -308,26 +1118,118 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_KEYIN3_133, NULL);
 	gpio_request(GPIO_FN_KEYIN4,     NULL);
 
-	/* SDHI0 */
-	gpio_request(GPIO_FN_SDHICD0, NULL);
-	gpio_request(GPIO_FN_SDHIWP0, NULL);
-	gpio_request(GPIO_FN_SDHICMD0, NULL);
-	gpio_request(GPIO_FN_SDHICLK0, NULL);
-	gpio_request(GPIO_FN_SDHID0_3, NULL);
-	gpio_request(GPIO_FN_SDHID0_2, NULL);
-	gpio_request(GPIO_FN_SDHID0_1, NULL);
-	gpio_request(GPIO_FN_SDHID0_0, NULL);
+	/* enable TouchScreen */
+	set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
+
+	tsc_device.irq = IRQ28;
+	i2c_register_board_info(1, &tsc_device, 1);
+
+	/* LCDC0 */
+	lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
+	lcdc_info.ch[0].interface_type		= RGB24;
+	lcdc_info.ch[0].clock_divider		= 1;
+	lcdc_info.ch[0].flags			= LCDC_FLAGS_DWPOL;
+	lcdc_info.ch[0].lcd_size_cfg.width	= 44;
+	lcdc_info.ch[0].lcd_size_cfg.height	= 79;
+
+	platform_add_devices(qhd_devices, ARRAY_SIZE(qhd_devices));
+
+#else
+	/*
+	 * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and
+	 * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF.
+	 */
+
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+
+	gpio_request(GPIO_PORT189, NULL); /* backlight */
+	gpio_direction_output(GPIO_PORT189, 1);
+
+	gpio_request(GPIO_PORT151, NULL); /* LCDDON */
+	gpio_direction_output(GPIO_PORT151, 1);
+
+	lcdc_info.clock_source			= LCDC_CLK_BUS;
+	lcdc_info.ch[0].interface_type		= RGB18;
+	lcdc_info.ch[0].clock_divider		= 2;
+	lcdc_info.ch[0].flags			= 0;
+	lcdc_info.ch[0].lcd_size_cfg.width	= 152;
+	lcdc_info.ch[0].lcd_size_cfg.height	= 91;
+
+	/* enable TouchScreen */
+	set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
+
+	tsc_device.irq = IRQ7;
+	i2c_register_board_info(0, &tsc_device, 1);
+#endif /* CONFIG_AP4EVB_QHD */
+
+	/* CEU */
+
+	/*
+	 * TODO: reserve memory for V4L2 DMA buffers, when a suitable API
+	 * becomes available
+	 */
+
+	/* MIPI-CSI stuff */
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+
+	clk = clk_get(NULL, "vck1_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 13000000));
+		clk_enable(clk);
+		clk_put(clk);
+	}
 
 	sh7372_add_standard_devices();
 
+	/* HDMI */
+	gpio_request(GPIO_FN_HDMI_HPD, NULL);
+	gpio_request(GPIO_FN_HDMI_CEC, NULL);
+
+	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
+#define SRCR4 0xe61580bc
+	srcr4 = __raw_readl(SRCR4);
+	__raw_writel(srcr4 | (1 << 13), SRCR4);
+	udelay(50);
+	__raw_writel(srcr4 & ~(1 << 13), SRCR4);
+
 	platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
 }
 
+static void __init ap4evb_timer_init(void)
+{
+	sh7372_clock_init();
+	shmobile_timer.init();
+
+	/* External clock source */
+	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
+}
+
+static struct sys_timer ap4evb_timer = {
+	.init		= ap4evb_timer_init,
+};
+
 MACHINE_START(AP4EVB, "ap4evb")
-	.phys_io	= 0xe6000000,
-	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
 	.map_io		= ap4evb_map_io,
 	.init_irq	= sh7372_init_irq,
 	.init_machine	= ap4evb_init,
-	.timer		= &shmobile_timer,
+	.timer		= &ap4evb_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 9247503296c4..3b83d6320bec 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -37,6 +37,15 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+/*
+ * IrDA
+ *
+ * S67: 5bit : ON  power
+ *    : 6bit : ON  remote control
+ *             OFF IrDA
+ */
 
 static struct mtd_partition nor_flash_partitions[] = {
 	{
@@ -91,7 +100,7 @@ static struct platform_device nor_flash_device = {
 };
 
 /* USBHS */
-void usb_host_port_power(int port, int power)
+static void usb_host_port_power(int port, int power)
 {
 	if (!power) /* only power-on supported for now */
 		return;
@@ -113,7 +122,7 @@ static struct resource usb_host_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 65,
+		.start	= evt2irq(0xa20), /* USBHS_USHI0 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -153,7 +162,7 @@ static struct resource keysc_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 79,
+		.start  = evt2irq(0xbe0), /* KEYSC_KEY */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -209,11 +218,31 @@ static struct platform_device nand_flash_device = {
 	},
 };
 
+static struct resource irda_resources[] = {
+	[0] = {
+		.start	= 0xE6D00000,
+		.end	= 0xE6D01FD4 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x480), /* IRDA */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name		= "sh_irda",
+	.id		= -1,
+	.resource	= irda_resources,
+	.num_resources	= ARRAY_SIZE(irda_resources),
+};
+
 static struct platform_device *g3evm_devices[] __initdata = {
 	&nor_flash_device,
 	&usb_host_device,
 	&keysc_device,
 	&nand_flash_device,
+	&irda_device,
 };
 
 static struct map_desc g3evm_io_desc[] __initdata = {
@@ -232,9 +261,8 @@ static void __init g3evm_map_io(void)
 {
 	iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
 
-	/* setup early devices, clocks and console here as well */
+	/* setup early devices and console here as well */
 	sh7367_add_early_devices();
-	sh7367_clock_init();
 	shmobile_setup_console();
 }
 
@@ -271,9 +299,6 @@ static void __init g3evm_init(void)
 	gpio_request(GPIO_FN_EXTLP, NULL);
 	gpio_request(GPIO_FN_IDIN, NULL);
 
-	/* enable clock in SYMSTPCR2 */
-	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 22), 0xe6158048);
-
 	/* setup USB phy */
 	__raw_writew(0x0300, 0xe605810a);	/* USBCR1 */
 	__raw_writew(0x00e0, 0xe60581c0);	/* CPFCH */
@@ -318,16 +343,30 @@ static void __init g3evm_init(void)
 	/* FOE, FCDE, FSC on dedicated pins */
 	__raw_writel(__raw_readl(0xe6158048) & ~(1 << 15), 0xe6158048);
 
+	/* IrDA */
+	gpio_request(GPIO_FN_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_IRDA_IN, NULL);
+	gpio_request(GPIO_FN_IRDA_FIRSEL, NULL);
+	set_irq_type(evt2irq(0x480), IRQ_TYPE_LEVEL_LOW);
+
 	sh7367_add_standard_devices();
 
 	platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
 }
 
+static void __init g3evm_timer_init(void)
+{
+	sh7367_clock_init();
+	shmobile_timer.init();
+}
+
+static struct sys_timer g3evm_timer = {
+	.init		= g3evm_timer_init,
+};
+
 MACHINE_START(G3EVM, "g3evm")
-	.phys_io	= 0xe6000000,
-	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
 	.map_io		= g3evm_map_io,
 	.init_irq	= sh7367_init_irq,
 	.init_machine	= g3evm_init,
-	.timer		= &shmobile_timer,
+	.timer		= &g3evm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 10673a90be52..5b3b582ef3f2 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -30,12 +30,39 @@
 #include <linux/io.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
 #include <linux/gpio.h>
 #include <mach/sh7377.h>
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+/*
+ * SDHI
+ *
+ * SDHI0 : card detection is possible
+ * SDHI1 : card detection is impossible
+ *
+ * [G4-MAIN-BOARD]
+ * JP74 : short		# DBG_2V8A    for SDHI0
+ * JP75 : NC		# DBG_3V3A    for SDHI0
+ * JP76 : NC		# DBG_3V3A_SD for SDHI0
+ * JP77 : NC		# 3V3A_SDIO   for SDHI1
+ * JP78 : short		# DBG_2V8A    for SDHI1
+ * JP79 : NC		# DBG_3V3A    for SDHI1
+ * JP80 : NC		# DBG_3V3A_SD for SDHI1
+ *
+ * [G4-CORE-BOARD]
+ * S32 : all off	# to dissever from G3-CORE_DBG board
+ * S33 : all off	# to dissever from G3-CORE_DBG board
+ *
+ * [G3-CORE_DBG-BOARD]
+ * S1  : all off	# to dissever from G3-CORE_DBG board
+ * S3  : all off	# to dissever from G3-CORE_DBG board
+ * S4  : all off	# to dissever from G3-CORE_DBG board
+ */
 
 static struct mtd_partition nor_flash_partitions[] = {
 	{
@@ -90,7 +117,7 @@ static struct platform_device nor_flash_device = {
 };
 
 /* USBHS */
-void usb_host_port_power(int port, int power)
+static void usb_host_port_power(int port, int power)
 {
 	if (!power) /* only power-on supported for now */
 		return;
@@ -112,8 +139,7 @@ static struct resource usb_host_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 65,
-		.end	= 65,
+		.start	= evt2irq(0x0a20), /* USBHS_USHI0 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -154,7 +180,7 @@ static struct resource keysc_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = 79,
+		.start  = evt2irq(0x0be0), /* KEYSC_KEY */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -169,10 +195,53 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* SDHI */
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0xe6d50000,
+		.end    = 0xe6d501ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x0e00), /* SDHI0 */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.id             = 0,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0xe6d60000,
+		.end    = 0xe6d601ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x0e80), /* SDHI1 */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi1_resources),
+	.resource       = sdhi1_resources,
+	.id             = 1,
+};
+
 static struct platform_device *g4evm_devices[] __initdata = {
 	&nor_flash_device,
 	&usb_host_device,
 	&keysc_device,
+	&sdhi0_device,
+	&sdhi1_device,
 };
 
 static struct map_desc g4evm_io_desc[] __initdata = {
@@ -191,12 +260,41 @@ static void __init g4evm_map_io(void)
 {
 	iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
 
-	/* setup early devices, clocks and console here as well */
+	/* setup early devices and console here as well */
 	sh7377_add_early_devices();
-	sh7367_clock_init(); /* use g3 clocks for now */
 	shmobile_setup_console();
 }
 
+#define GPIO_SDHID0_D0	0xe60520fc
+#define GPIO_SDHID0_D1	0xe60520fd
+#define GPIO_SDHID0_D2	0xe60520fe
+#define GPIO_SDHID0_D3	0xe60520ff
+#define GPIO_SDHICMD0	0xe6052100
+
+#define GPIO_SDHID1_D0	0xe6052103
+#define GPIO_SDHID1_D1	0xe6052104
+#define GPIO_SDHID1_D2	0xe6052105
+#define GPIO_SDHID1_D3	0xe6052106
+#define GPIO_SDHICMD1	0xe6052107
+
+/*
+ * FIXME !!
+ *
+ * gpio_pull_up is quick_hack.
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static void __init gpio_pull_up(u32 addr)
+{
+	u8 data = __raw_readb(addr);
+
+	data &= 0x0F;
+	data |= 0xC0;
+	__raw_writeb(data, addr);
+}
+
 static void __init g4evm_init(void)
 {
 	sh7377_pinmux_init();
@@ -229,9 +327,6 @@ static void __init g4evm_init(void)
 	gpio_request(GPIO_FN_EXTLP, NULL);
 	gpio_request(GPIO_FN_IDIN, NULL);
 
-	/* enable clock in SMSTPCR3 */
-	__raw_writel(__raw_readl(0xe615013c) & ~(1 << 22), 0xe615013c);
-
 	/* setup USB phy */
 	__raw_writew(0x0200, 0xe605810a);       /* USBCR1 */
 	__raw_writew(0x00e0, 0xe60581c0);       /* CPFCH */
@@ -253,16 +348,52 @@ static void __init g4evm_init(void)
 	gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL);
 	gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL);
 
+	/* SDHI0 */
+	gpio_request(GPIO_FN_SDHICLK0, NULL);
+	gpio_request(GPIO_FN_SDHICD0, NULL);
+	gpio_request(GPIO_FN_SDHID0_0, NULL);
+	gpio_request(GPIO_FN_SDHID0_1, NULL);
+	gpio_request(GPIO_FN_SDHID0_2, NULL);
+	gpio_request(GPIO_FN_SDHID0_3, NULL);
+	gpio_request(GPIO_FN_SDHICMD0, NULL);
+	gpio_request(GPIO_FN_SDHIWP0, NULL);
+	gpio_pull_up(GPIO_SDHID0_D0);
+	gpio_pull_up(GPIO_SDHID0_D1);
+	gpio_pull_up(GPIO_SDHID0_D2);
+	gpio_pull_up(GPIO_SDHID0_D3);
+	gpio_pull_up(GPIO_SDHICMD0);
+
+	/* SDHI1 */
+	gpio_request(GPIO_FN_SDHICLK1, NULL);
+	gpio_request(GPIO_FN_SDHID1_0, NULL);
+	gpio_request(GPIO_FN_SDHID1_1, NULL);
+	gpio_request(GPIO_FN_SDHID1_2, NULL);
+	gpio_request(GPIO_FN_SDHID1_3, NULL);
+	gpio_request(GPIO_FN_SDHICMD1, NULL);
+	gpio_pull_up(GPIO_SDHID1_D0);
+	gpio_pull_up(GPIO_SDHID1_D1);
+	gpio_pull_up(GPIO_SDHID1_D2);
+	gpio_pull_up(GPIO_SDHID1_D3);
+	gpio_pull_up(GPIO_SDHICMD1);
+
 	sh7377_add_standard_devices();
 
 	platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
 }
 
+static void __init g4evm_timer_init(void)
+{
+	sh7377_clock_init();
+	shmobile_timer.init();
+}
+
+static struct sys_timer g4evm_timer = {
+	.init		= g4evm_timer_init,
+};
+
 MACHINE_START(G4EVM, "g4evm")
-	.phys_io	= 0xe6000000,
-	.io_pg_offst	= ((0xe6000000) >> 18) & 0xfffc,
 	.map_io		= g4evm_map_io,
 	.init_irq	= sh7377_init_irq,
 	.init_machine	= g4evm_init,
-	.timer		= &shmobile_timer,
+	.timer		= &g4evm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
index bb940c6e4e6c..9f78729098f2 100644
--- a/arch/arm/mach-shmobile/clock-sh7367.c
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -1,5 +1,5 @@
 /*
- * Preliminary clock framework support for sh7367
+ * SH7367 clock framework support
  *
  * Copyright (C) 2010  Magnus Damm
  *
@@ -17,87 +17,342 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+
+/* SH7367 registers */
+#define RTFRQCR    0xe6150000
+#define SYFRQCR    0xe6150004
+#define CMFRQCR    0xe61500E0
+#define VCLKCR1    0xe6150008
+#define VCLKCR2    0xe615000C
+#define VCLKCR3    0xe615001C
+#define SCLKACR    0xe6150010
+#define SCLKBCR    0xe6150014
+#define SUBUSBCKCR 0xe6158080
+#define SPUCKCR    0xe6150084
+#define MSUCKCR    0xe6150088
+#define MVI3CKCR   0xe6150090
+#define VOUCKCR    0xe6150094
+#define MFCK1CR    0xe6150098
+#define MFCK2CR    0xe615009C
+#define PLLC1CR    0xe6150028
+#define PLLC2CR    0xe615002C
+#define RTMSTPCR0  0xe6158030
+#define RTMSTPCR2  0xe6158038
+#define SYMSTPCR0  0xe6158040
+#define SYMSTPCR2  0xe6158048
+#define CMMSTPCR0  0xe615804c
 
-struct clk {
-	const char *name;
-	unsigned long rate;
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+	.rate           = 32768,
 };
 
-#include <asm/clkdev.h>
+/*
+ * 26MHz default rate for the EXTALB1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7367_extalb1_clk = {
+	.rate		= 26666666,
+};
 
-int __clk_get(struct clk *clk)
-{
-	return 1;
-}
-EXPORT_SYMBOL(__clk_get);
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7367_extal2_clk = {
+	.rate		= 48000000,
+};
 
-void __clk_put(struct clk *clk)
+/* A fixed divide-by-2 block */
+static unsigned long div2_recalc(struct clk *clk)
 {
+	return clk->parent->rate / 2;
 }
-EXPORT_SYMBOL(__clk_put);
 
+static struct clk_ops div2_clk_ops = {
+	.recalc		= div2_recalc,
+};
+
+/* Divide extalb1 by two */
+static struct clk extalb1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7367_extalb1_clk,
+};
+
+/* Divide extal2 by two */
+static struct clk extal2_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7367_extal2_clk,
+};
 
-int clk_enable(struct clk *clk)
+/* PLLC1 */
+static unsigned long pllc1_recalc(struct clk *clk)
 {
-	return 0;
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLC1CR) & (1 << 14))
+		mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
 }
-EXPORT_SYMBOL(clk_enable);
 
-void clk_disable(struct clk *clk)
+static struct clk_ops pllc1_clk_ops = {
+	.recalc		= pllc1_recalc,
+};
+
+static struct clk pllc1_clk = {
+	.ops		= &pllc1_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extalb1_div2_clk,
+};
+
+/* Divide PLLC1 by two */
+static struct clk pllc1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &pllc1_clk,
+};
+
+/* PLLC2 */
+static unsigned long pllc2_recalc(struct clk *clk)
 {
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLC2CR) & (1 << 31))
+		mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
 }
-EXPORT_SYMBOL(clk_disable);
 
-unsigned long clk_get_rate(struct clk *clk)
+static struct clk_ops pllc2_clk_ops = {
+	.recalc		= pllc2_recalc,
+};
+
+static struct clk pllc2_clk = {
+	.ops		= &pllc2_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extalb1_div2_clk,
+};
+
+static struct clk *main_clks[] = {
+	&r_clk,
+	&sh7367_extalb1_clk,
+	&sh7367_extal2_clk,
+	&extalb1_div2_clk,
+	&extal2_div2_clk,
+	&pllc1_clk,
+	&pllc1_div2_clk,
+	&pllc2_clk,
+};
+
+static void div4_kick(struct clk *clk)
 {
-	return clk ? clk->rate : 0;
+	unsigned long value;
+
+	/* set KICK bit in SYFRQCR to update hardware setting */
+	value = __raw_readl(SYFRQCR);
+	value |= (1 << 31);
+	__raw_writel(value, SYFRQCR);
 }
-EXPORT_SYMBOL(clk_get_rate);
 
-/* a static peripheral clock for now - enough to get sh-sci working */
-static struct clk peripheral_clk = {
-	.name	    = "peripheral_clk",
-	.rate	    = 48000000,
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+			  24, 32, 36, 48, 0, 72, 0, 0 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
 };
 
-/* a static rclk for now - enough to get sh_cmt working */
-static struct clk r_clk = {
-	.name	    = "r_clk",
-	.rate	    = 32768,
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+	.kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_G, DIV4_S, DIV4_B,
+       DIV4_ZX, DIV4_ZT, DIV4_Z, DIV4_ZD, DIV4_HP,
+       DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
+
+static struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_G] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_S] = DIV4(RTFRQCR, 12, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_ZX] = DIV4(SYFRQCR, 20, 0x6fff, 0),
+	[DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0),
+	[DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0),
+	[DIV4_ZD] = DIV4(SYFRQCR, 8, 0x6fff, 0),
+	[DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0),
+	[DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0),
+	[DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0),
+	[DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0),
+	[DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0),
 };
 
-/* a static usb0 for now - enough to get r8a66597 working */
-static struct clk usb0_clk = {
-	.name	    = "usb0",
+enum { DIV6_SUB, DIV6_SIUA, DIV6_SIUB, DIV6_MSU, DIV6_SPU,
+       DIV6_MVI3, DIV6_MF1, DIV6_MF2,
+       DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_VOU,
+       DIV6_NR };
+
+static struct clk div6_clks[DIV6_NR] = {
+	[DIV6_SUB] = SH_CLK_DIV6(&sh7367_extal2_clk, SUBUSBCKCR, 0),
+	[DIV6_SIUA] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKACR, 0),
+	[DIV6_SIUB] = SH_CLK_DIV6(&pllc1_div2_clk, SCLKBCR, 0),
+	[DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0),
+	[DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
+	[DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0),
+	[DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0),
+	[DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0),
+	[DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
+	[DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
+	[DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
+	[DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0),
 };
 
-/* a static keysc0 clk for now - enough to get sh_keysc working */
-static struct clk keysc0_clk = {
-	.name	    = "keysc0",
+enum { RTMSTP001,
+       RTMSTP231, RTMSTP230, RTMSTP229, RTMSTP228, RTMSTP226,
+       RTMSTP216, RTMSTP206, RTMSTP205, RTMSTP201,
+       SYMSTP023, SYMSTP007, SYMSTP006, SYMSTP004,
+       SYMSTP003, SYMSTP002, SYMSTP001, SYMSTP000,
+       SYMSTP231, SYMSTP229, SYMSTP225, SYMSTP223, SYMSTP222,
+       SYMSTP215, SYMSTP214, SYMSTP213, SYMSTP211,
+       CMMSTP003,
+       MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[RTMSTP001] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR0, 1, 0), /* IIC2 */
+	[RTMSTP231] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 31, 0), /* VEU3 */
+	[RTMSTP230] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 30, 0), /* VEU2 */
+	[RTMSTP229] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 29, 0), /* VEU1 */
+	[RTMSTP228] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 28, 0), /* VEU0 */
+	[RTMSTP226] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 26, 0), /* VEU2H */
+	[RTMSTP216] = MSTP(&div6_clks[DIV6_SUB], RTMSTPCR2, 16, 0), /* IIC0 */
+	[RTMSTP206] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 6, 0), /* JPU */
+	[RTMSTP205] = MSTP(&div6_clks[DIV6_VOU], RTMSTPCR2, 5, 0), /* VOU */
+	[RTMSTP201] = MSTP(&div4_clks[DIV4_B], RTMSTPCR2, 1, 0), /* VPU */
+	[SYMSTP023] = MSTP(&div6_clks[DIV6_SPU], SYMSTPCR0, 23, 0), /* SPU1 */
+	[SYMSTP007] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 7, 0), /* SCIFA5 */
+	[SYMSTP006] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 6, 0), /* SCIFB */
+	[SYMSTP004] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 4, 0), /* SCIFA0 */
+	[SYMSTP003] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 3, 0), /* SCIFA1 */
+	[SYMSTP002] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 2, 0), /* SCIFA2 */
+	[SYMSTP001] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 1, 0), /* SCIFA3 */
+	[SYMSTP000] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR0, 0, 0), /* SCIFA4 */
+	[SYMSTP231] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 31, 0), /* SIU */
+	[SYMSTP229] = MSTP(&r_clk, SYMSTPCR2, 29, 0), /* CMT10 */
+	[SYMSTP225] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 25, 0), /* IRDA */
+	[SYMSTP223] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 23, 0), /* IIC1 */
+	[SYMSTP222] = MSTP(&div6_clks[DIV6_SUB], SYMSTPCR2, 22, 0), /* USBHS */
+	[SYMSTP215] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 15, 0), /* FLCTL */
+	[SYMSTP214] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 14, 0), /* SDHI0 */
+	[SYMSTP213] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 13, 0), /* SDHI1 */
+	[SYMSTP211] = MSTP(&div4_clks[DIV4_HP], SYMSTPCR2, 11, 0), /* SDHI2 */
+	[CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */
 };
 
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+
 static struct clk_lookup lookups[] = {
-	{
-		.clk = &peripheral_clk,
-	}, {
-		.clk = &r_clk,
-	}, {
-		.clk = &usb0_clk,
-	}, {
-		.clk = &keysc0_clk,
-	}
+	/* main clocks */
+	CLKDEV_CON_ID("r_clk", &r_clk),
+	CLKDEV_CON_ID("extalb1", &sh7367_extalb1_clk),
+	CLKDEV_CON_ID("extal2", &sh7367_extal2_clk),
+	CLKDEV_CON_ID("extalb1_div2_clk", &extalb1_div2_clk),
+	CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
+	CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
+	CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
+	CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("g_clk", &div4_clks[DIV4_G]),
+	CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
+	CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
+	CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]),
+	CLKDEV_CON_ID("zd_clk", &div4_clks[DIV4_ZD]),
+	CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
+	CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]),
+	CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
+	CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
+	CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
+	CLKDEV_CON_ID("siua_clk", &div6_clks[DIV6_SIUA]),
+	CLKDEV_CON_ID("siub_clk", &div6_clks[DIV6_SIUB]),
+	CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]),
+	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
+	CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]),
+	CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]),
+	CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]),
+	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
+	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
+
+	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[RTMSTP001]), /* IIC2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[RTMSTP231]), /* VEU3 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[RTMSTP230]), /* VEU2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[RTMSTP229]), /* VEU1 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[RTMSTP228]), /* VEU0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[RTMSTP226]), /* VEU2H */
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[RTMSTP216]), /* IIC0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[RTMSTP206]), /* JPU */
+	CLKDEV_DEV_ID("sh-vou", &mstp_clks[RTMSTP205]), /* VOU */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[RTMSTP201]), /* VPU */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[SYMSTP023]), /* SPU1 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[SYMSTP007]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[SYMSTP006]), /* SCIFB */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[SYMSTP004]), /* SCIFA0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[SYMSTP003]), /* SCIFA1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[SYMSTP002]), /* SCIFA2 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[SYMSTP001]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[SYMSTP000]), /* SCIFA4 */
+	CLKDEV_DEV_ID("sh_siu", &mstp_clks[SYMSTP231]), /* SIU */
+	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[SYMSTP229]), /* CMT10 */
+	CLKDEV_DEV_ID("sh_irda", &mstp_clks[SYMSTP225]), /* IRDA */
+	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[SYMSTP223]), /* IIC1 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[SYMSTP222]), /* USBHS */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[SYMSTP222]), /* USBHS */
+	CLKDEV_DEV_ID("sh_flctl", &mstp_clks[SYMSTP215]), /* FLCTL */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[SYMSTP214]), /* SDHI0 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[SYMSTP213]), /* SDHI1 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[SYMSTP211]), /* SDHI2 */
+	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[CMMSTP003]), /* KEYSC */
 };
 
 void __init sh7367_clock_init(void)
 {
-	int i;
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++) {
-		lookups[i].con_id = lookups[i].clk->name;
-		clkdev_add(&lookups[i]);
-	}
+	if (!ret)
+		clk_init();
+	else
+		panic("failed to setup sh7367 clocks\n");
 }
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
new file mode 100644
index 000000000000..8565aefa21fd
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -0,0 +1,595 @@
+/*
+ * SH7372 clock framework support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+
+/* SH7372 registers */
+#define FRQCRA		0xe6150000
+#define FRQCRB		0xe6150004
+#define FRQCRC		0xe61500e0
+#define FRQCRD		0xe61500e4
+#define VCLKCR1		0xe6150008
+#define VCLKCR2		0xe615000c
+#define VCLKCR3		0xe615001c
+#define FMSICKCR	0xe6150010
+#define FMSOCKCR	0xe6150014
+#define FSIACKCR	0xe6150018
+#define FSIBCKCR	0xe6150090
+#define SUBCKCR		0xe6150080
+#define SPUCKCR		0xe6150084
+#define VOUCKCR		0xe6150088
+#define HDMICKCR	0xe6150094
+#define DSITCKCR	0xe6150060
+#define DSI0PCKCR	0xe6150064
+#define DSI1PCKCR	0xe6150098
+#define PLLC01CR	0xe6150028
+#define PLLC2CR		0xe615002c
+#define SMSTPCR0	0xe6150130
+#define SMSTPCR1	0xe6150134
+#define SMSTPCR2	0xe6150138
+#define SMSTPCR3	0xe615013c
+#define SMSTPCR4	0xe6150140
+
+/* Platforms must set frequency on their DV_CLKI pin */
+struct clk sh7372_dv_clki_clk = {
+};
+
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * 26MHz default rate for the EXTAL1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7372_extal1_clk = {
+	.rate		= 26000000,
+};
+
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7372_extal2_clk = {
+	.rate		= 48000000,
+};
+
+/* A fixed divide-by-2 block */
+static unsigned long div2_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 2;
+}
+
+static struct clk_ops div2_clk_ops = {
+	.recalc		= div2_recalc,
+};
+
+/* Divide dv_clki by two */
+struct clk sh7372_dv_clki_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7372_dv_clki_clk,
+};
+
+/* Divide extal1 by two */
+static struct clk extal1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7372_extal1_clk,
+};
+
+/* Divide extal2 by two */
+static struct clk extal2_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7372_extal2_clk,
+};
+
+/* Divide extal2 by four */
+static struct clk extal2_div4_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &extal2_div2_clk,
+};
+
+/* PLLC0 and PLLC1 */
+static unsigned long pllc01_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLC01CR) & (1 << 14))
+		mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops pllc01_clk_ops = {
+	.recalc		= pllc01_recalc,
+};
+
+static struct clk pllc0_clk = {
+	.ops		= &pllc01_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extal1_div2_clk,
+	.enable_reg	= (void __iomem *)FRQCRC,
+};
+
+static struct clk pllc1_clk = {
+	.ops		= &pllc01_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extal1_div2_clk,
+	.enable_reg	= (void __iomem *)FRQCRA,
+};
+
+/* Divide PLLC1 by two */
+static struct clk pllc1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &pllc1_clk,
+};
+
+/* PLLC2 */
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *pllc2_parent[] = {
+	[0] = &extal1_div2_clk,
+	[1] = &extal2_div2_clk,
+	[2] = &sh7372_dv_clki_div2_clk,
+};
+
+/* Only multipliers 20 * 2 to 46 * 2 are valid, last entry for CPUFREQ_TABLE_END */
+static struct cpufreq_frequency_table pllc2_freq_table[29];
+
+static void pllc2_table_rebuild(struct clk *clk)
+{
+	int i;
+
+	/* Initialise PLLC2 frequency table */
+	for (i = 0; i < ARRAY_SIZE(pllc2_freq_table) - 2; i++) {
+		pllc2_freq_table[i].frequency = clk->parent->rate * (i + 20) * 2;
+		pllc2_freq_table[i].index = i;
+	}
+
+	/* This is a special entry - switching PLL off makes it a repeater */
+	pllc2_freq_table[i].frequency = clk->parent->rate;
+	pllc2_freq_table[i].index = i;
+
+	pllc2_freq_table[++i].frequency = CPUFREQ_TABLE_END;
+	pllc2_freq_table[i].index = i;
+}
+
+static unsigned long pllc2_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	pllc2_table_rebuild(clk);
+
+	/*
+	 * If the PLL is off, mult == 1, clk->rate will be updated in
+	 * pllc2_enable().
+	 */
+	if (__raw_readl(PLLC2CR) & (1 << 31))
+		mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
+}
+
+static long pllc2_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_table_round(clk, clk->freq_table, rate);
+}
+
+static int pllc2_enable(struct clk *clk)
+{
+	int i;
+
+	__raw_writel(__raw_readl(PLLC2CR) | 0x80000000, PLLC2CR);
+
+	for (i = 0; i < 100; i++)
+		if (__raw_readl(PLLC2CR) & 0x80000000) {
+			clk->rate = pllc2_recalc(clk);
+			return 0;
+		}
+
+	pr_err("%s(): timeout!\n", __func__);
+
+	return -ETIMEDOUT;
+}
+
+static void pllc2_disable(struct clk *clk)
+{
+	__raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
+}
+
+static int pllc2_set_rate(struct clk *clk,
+			  unsigned long rate, int algo_id)
+{
+	unsigned long value;
+	int idx;
+
+	idx = clk_rate_table_find(clk, clk->freq_table, rate);
+	if (idx < 0)
+		return idx;
+
+	if (rate == clk->parent->rate) {
+		pllc2_disable(clk);
+		return 0;
+	}
+
+	value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
+
+	if (value & 0x80000000)
+		pllc2_disable(clk);
+
+	__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
+
+	if (value & 0x80000000)
+		return pllc2_enable(clk);
+
+	return 0;
+}
+
+static int pllc2_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 value;
+	int ret, i;
+
+	if (!clk->parent_table || !clk->parent_num)
+		return -EINVAL;
+
+	/* Search the parent */
+	for (i = 0; i < clk->parent_num; i++)
+		if (clk->parent_table[i] == parent)
+			break;
+
+	if (i == clk->parent_num)
+		return -ENODEV;
+
+	ret = clk_reparent(clk, parent);
+	if (ret < 0)
+		return ret;
+
+	value = __raw_readl(PLLC2CR) & ~(3 << 6);
+
+	__raw_writel(value | (i << 6), PLLC2CR);
+
+	/* Rebiuld the frequency table */
+	pllc2_table_rebuild(clk);
+
+	return 0;
+}
+
+static struct clk_ops pllc2_clk_ops = {
+	.recalc		= pllc2_recalc,
+	.round_rate	= pllc2_round_rate,
+	.set_rate	= pllc2_set_rate,
+	.enable		= pllc2_enable,
+	.disable	= pllc2_disable,
+	.set_parent	= pllc2_set_parent,
+};
+
+struct clk sh7372_pllc2_clk = {
+	.ops		= &pllc2_clk_ops,
+	.parent		= &extal1_div2_clk,
+	.freq_table	= pllc2_freq_table,
+	.parent_table	= pllc2_parent,
+	.parent_num	= ARRAY_SIZE(pllc2_parent),
+};
+
+/* External input clock (pin name: FSIACK/FSIBCK ) */
+struct clk sh7372_fsiack_clk = {
+};
+
+struct clk sh7372_fsibck_clk = {
+};
+
+static struct clk *main_clks[] = {
+	&sh7372_dv_clki_clk,
+	&r_clk,
+	&sh7372_extal1_clk,
+	&sh7372_extal2_clk,
+	&sh7372_dv_clki_div2_clk,
+	&extal1_div2_clk,
+	&extal2_div2_clk,
+	&extal2_div4_clk,
+	&pllc0_clk,
+	&pllc1_clk,
+	&pllc1_div2_clk,
+	&sh7372_pllc2_clk,
+	&sh7372_fsiack_clk,
+	&sh7372_fsibck_clk,
+};
+
+static void div4_kick(struct clk *clk)
+{
+	unsigned long value;
+
+	/* set KICK bit in FRQCRB to update hardware setting */
+	value = __raw_readl(FRQCRB);
+	value |= (1 << 31);
+	__raw_writel(value, FRQCRB);
+}
+
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+			  24, 32, 36, 48, 0, 72, 96, 0 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+	.kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
+       DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP,
+       DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP,
+       DIV4_DDRP, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
+
+static struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_ZG] = DIV4(FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0),
+	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0x6fff, 0),
+	[DIV4_ZT] = DIV4(FRQCRB, 16, 0x6fff, 0),
+	[DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0),
+	[DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0),
+	[DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0),
+	[DIV4_S] = DIV4(FRQCRC, 12, 0x6fff, 0),
+	[DIV4_ZB] = DIV4(FRQCRC, 8, 0x6fff, 0),
+	[DIV4_ZB3] = DIV4(FRQCRC, 4, 0x6fff, 0),
+	[DIV4_CP] = DIV4(FRQCRC, 0, 0x6fff, 0),
+	[DIV4_DDRP] = DIV4(FRQCRD, 0, 0x677c, 0),
+};
+
+enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO,
+       DIV6_SUB, DIV6_SPU,
+       DIV6_VOU, DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
+       DIV6_NR };
+
+static struct clk div6_clks[DIV6_NR] = {
+	[DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
+	[DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
+	[DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
+	[DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0),
+	[DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0),
+	[DIV6_SUB] = SH_CLK_DIV6(&sh7372_extal2_clk, SUBCKCR, 0),
+	[DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
+	[DIV6_VOU] = SH_CLK_DIV6(&pllc1_div2_clk, VOUCKCR, 0),
+	[DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0),
+	[DIV6_DSI0P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI0PCKCR, 0),
+	[DIV6_DSI1P] = SH_CLK_DIV6(&pllc1_div2_clk, DSI1PCKCR, 0),
+};
+
+enum { DIV6_HDMI, DIV6_FSIA, DIV6_FSIB, DIV6_REPARENT_NR };
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *hdmi_parent[] = {
+	[0] = &pllc1_div2_clk,
+	[1] = &sh7372_pllc2_clk,
+	[2] = &sh7372_dv_clki_clk,
+	[3] = NULL,	/* pllc2_div4 not implemented yet */
+};
+
+static struct clk *fsiackcr_parent[] = {
+	[0] = &pllc1_div2_clk,
+	[1] = &sh7372_pllc2_clk,
+	[2] = &sh7372_fsiack_clk, /* external input for FSI A */
+	[3] = NULL,	/* setting prohibited */
+};
+
+static struct clk *fsibckcr_parent[] = {
+	[0] = &pllc1_div2_clk,
+	[1] = &sh7372_pllc2_clk,
+	[2] = &sh7372_fsibck_clk, /* external input for FSI B */
+	[3] = NULL,	/* setting prohibited */
+};
+
+static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
+	[DIV6_HDMI] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, HDMICKCR, 0,
+				      hdmi_parent, ARRAY_SIZE(hdmi_parent), 6, 2),
+	[DIV6_FSIA] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, FSIACKCR, 0,
+				      fsiackcr_parent, ARRAY_SIZE(fsiackcr_parent), 6, 2),
+	[DIV6_FSIB] = SH_CLK_DIV6_EXT(&pllc1_div2_clk, FSIBCKCR, 0,
+				      fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2),
+};
+
+enum { MSTP001,
+       MSTP131, MSTP130,
+       MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
+       MSTP118, MSTP117, MSTP116,
+       MSTP106, MSTP101, MSTP100,
+       MSTP223,
+       MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+       MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312,
+       MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403,
+       MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
+	[MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
+	[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
+	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
+	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
+	[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */
+	[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */
+	[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
+	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
+	[MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
+	[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
+	[MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */
+	[MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */
+	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
+	[MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */
+	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
+	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
+	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
+	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */
+	[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
+	[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
+	[MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */
+	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */
+	[MSTP415] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */
+	[MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */
+	[MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */
+	[MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */
+	[MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */
+	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
+};
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("dv_clki_div2_clk", &sh7372_dv_clki_div2_clk),
+	CLKDEV_CON_ID("r_clk", &r_clk),
+	CLKDEV_CON_ID("extal1", &sh7372_extal1_clk),
+	CLKDEV_CON_ID("extal2", &sh7372_extal2_clk),
+	CLKDEV_CON_ID("extal1_div2_clk", &extal1_div2_clk),
+	CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
+	CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk),
+	CLKDEV_CON_ID("pllc0_clk", &pllc0_clk),
+	CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
+	CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
+	CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
+	CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
+	CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
+	CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
+	CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
+	CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
+	CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
+	CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]),
+	CLKDEV_CON_ID("s_clk", &div4_clks[DIV4_S]),
+	CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
+	CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
+	CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
+	CLKDEV_CON_ID("ddrp_clk", &div4_clks[DIV4_DDRP]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
+	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
+	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
+	CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
+	CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
+	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
+	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
+	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
+	CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]),
+	CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]),
+	CLKDEV_CON_ID("dsi0p_clk", &div6_clks[DIV6_DSI0P]),
+	CLKDEV_CON_ID("dsi1p_clk", &div6_clks[DIV6_DSI1P]),
+
+	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
+	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
+	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
+	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
+	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
+	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
+	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */
+	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
+	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
+	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* SDHI2 */
+	CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */
+	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */
+	CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
+	CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
+	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+
+	CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
+	CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
+	CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),
+};
+
+void __init sh7372_clock_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		clk_init();
+	else
+		panic("failed to setup sh7372 clocks\n");
+
+}
diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c
new file mode 100644
index 000000000000..f91395aeb9ab
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-sh7377.c
@@ -0,0 +1,369 @@
+/*
+ * SH7377 clock framework support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <asm/clkdev.h>
+
+/* SH7377 registers */
+#define RTFRQCR    0xe6150000
+#define SYFRQCR    0xe6150004
+#define CMFRQCR    0xe61500E0
+#define VCLKCR1    0xe6150008
+#define VCLKCR2    0xe615000C
+#define VCLKCR3    0xe615001C
+#define FMSICKCR   0xe6150010
+#define FMSOCKCR   0xe6150014
+#define FSICKCR    0xe6150018
+#define PLLC1CR    0xe6150028
+#define PLLC2CR    0xe615002C
+#define SUBUSBCKCR 0xe6150080
+#define SPUCKCR    0xe6150084
+#define MSUCKCR    0xe6150088
+#define MVI3CKCR   0xe6150090
+#define HDMICKCR   0xe6150094
+#define MFCK1CR    0xe6150098
+#define MFCK2CR    0xe615009C
+#define DSITCKCR   0xe6150060
+#define DSIPCKCR   0xe6150064
+#define SMSTPCR0   0xe6150130
+#define SMSTPCR1   0xe6150134
+#define SMSTPCR2   0xe6150138
+#define SMSTPCR3   0xe615013C
+#define SMSTPCR4   0xe6150140
+
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * 26MHz default rate for the EXTALC1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7377_extalc1_clk = {
+	.rate		= 26666666,
+};
+
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh7377_extal2_clk = {
+	.rate		= 48000000,
+};
+
+/* A fixed divide-by-2 block */
+static unsigned long div2_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 2;
+}
+
+static struct clk_ops div2_clk_ops = {
+	.recalc		= div2_recalc,
+};
+
+/* Divide extalc1 by two */
+static struct clk extalc1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7377_extalc1_clk,
+};
+
+/* Divide extal2 by two */
+static struct clk extal2_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh7377_extal2_clk,
+};
+
+/* Divide extal2 by four */
+static struct clk extal2_div4_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &extal2_div2_clk,
+};
+
+/* PLLC1 */
+static unsigned long pllc1_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLC1CR) & (1 << 14))
+		mult = (((__raw_readl(RTFRQCR) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops pllc1_clk_ops = {
+	.recalc		= pllc1_recalc,
+};
+
+static struct clk pllc1_clk = {
+	.ops		= &pllc1_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extalc1_div2_clk,
+};
+
+/* Divide PLLC1 by two */
+static struct clk pllc1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &pllc1_clk,
+};
+
+/* PLLC2 */
+static unsigned long pllc2_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLC2CR) & (1 << 31))
+		mult = (((__raw_readl(PLLC2CR) >> 24) & 0x3f) + 1) * 2;
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops pllc2_clk_ops = {
+	.recalc		= pllc2_recalc,
+};
+
+static struct clk pllc2_clk = {
+	.ops		= &pllc2_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &extalc1_div2_clk,
+};
+
+static struct clk *main_clks[] = {
+	&r_clk,
+	&sh7377_extalc1_clk,
+	&sh7377_extal2_clk,
+	&extalc1_div2_clk,
+	&extal2_div2_clk,
+	&extal2_div4_clk,
+	&pllc1_clk,
+	&pllc1_div2_clk,
+	&pllc2_clk,
+};
+
+static void div4_kick(struct clk *clk)
+{
+	unsigned long value;
+
+	/* set KICK bit in SYFRQCR to update hardware setting */
+	value = __raw_readl(SYFRQCR);
+	value |= (1 << 31);
+	__raw_writel(value, SYFRQCR);
+}
+
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+			  24, 32, 36, 48, 0, 72, 96, 0 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+	.kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
+       DIV4_ZTR, DIV4_ZT, DIV4_Z, DIV4_HP,
+       DIV4_ZS, DIV4_ZB, DIV4_ZB3, DIV4_CP, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+  SH_CLK_DIV4(&pllc1_clk, _reg, _bit, _mask, _flags)
+
+static struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(RTFRQCR, 20, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_ZG] = DIV4(RTFRQCR, 16, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(RTFRQCR, 8, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_M1] = DIV4(RTFRQCR, 4, 0x6fff, CLK_ENABLE_ON_INIT),
+	[DIV4_CSIR] = DIV4(RTFRQCR, 0, 0x6fff, 0),
+	[DIV4_ZTR] = DIV4(SYFRQCR, 20, 0x6fff, 0),
+	[DIV4_ZT] = DIV4(SYFRQCR, 16, 0x6fff, 0),
+	[DIV4_Z] = DIV4(SYFRQCR, 12, 0x6fff, 0),
+	[DIV4_HP] = DIV4(SYFRQCR, 4, 0x6fff, 0),
+	[DIV4_ZS] = DIV4(CMFRQCR, 12, 0x6fff, 0),
+	[DIV4_ZB] = DIV4(CMFRQCR, 8, 0x6fff, 0),
+	[DIV4_ZB3] = DIV4(CMFRQCR, 4, 0x6fff, 0),
+	[DIV4_CP] = DIV4(CMFRQCR, 0, 0x6fff, 0),
+};
+
+enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_FMSI, DIV6_FMSO,
+       DIV6_FSI, DIV6_SUB, DIV6_SPU, DIV6_MSU, DIV6_MVI3, DIV6_HDMI,
+       DIV6_MF1, DIV6_MF2, DIV6_DSIT, DIV6_DSIP,
+       DIV6_NR };
+
+static struct clk div6_clks[] = {
+	[DIV6_VCK1] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR1, 0),
+	[DIV6_VCK2] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR2, 0),
+	[DIV6_VCK3] = SH_CLK_DIV6(&pllc1_div2_clk, VCLKCR3, 0),
+	[DIV6_FMSI] = SH_CLK_DIV6(&pllc1_div2_clk, FMSICKCR, 0),
+	[DIV6_FMSO] = SH_CLK_DIV6(&pllc1_div2_clk, FMSOCKCR, 0),
+	[DIV6_FSI] = SH_CLK_DIV6(&pllc1_div2_clk, FSICKCR, 0),
+	[DIV6_SUB] = SH_CLK_DIV6(&sh7377_extal2_clk, SUBUSBCKCR, 0),
+	[DIV6_SPU] = SH_CLK_DIV6(&pllc1_div2_clk, SPUCKCR, 0),
+	[DIV6_MSU] = SH_CLK_DIV6(&pllc1_div2_clk, MSUCKCR, 0),
+	[DIV6_MVI3] = SH_CLK_DIV6(&pllc1_div2_clk, MVI3CKCR, 0),
+	[DIV6_HDMI] = SH_CLK_DIV6(&pllc1_div2_clk, HDMICKCR, 0),
+	[DIV6_MF1] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK1CR, 0),
+	[DIV6_MF2] = SH_CLK_DIV6(&pllc1_div2_clk, MFCK2CR, 0),
+	[DIV6_DSIT] = SH_CLK_DIV6(&pllc1_div2_clk, DSITCKCR, 0),
+	[DIV6_DSIP] = SH_CLK_DIV6(&pllc1_div2_clk, DSIPCKCR, 0),
+};
+
+enum { MSTP001,
+       MSTP131, MSTP130, MSTP129, MSTP128, MSTP116, MSTP106, MSTP101,
+       MSTP223, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+       MSTP331, MSTP329, MSTP325, MSTP323, MSTP322,
+       MSTP315, MSTP314, MSTP313,
+       MSTP403,
+       MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+  SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[] = {
+	[MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
+	[MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
+	[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
+	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
+	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
+	[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
+	[MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */
+	[MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */
+	[MSTP223] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR2, 23, 0), /* SPU2 */
+	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
+	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
+	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
+	[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
+	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IRDA */
+	[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
+	[MSTP315] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 15, 0), /* FLCTL */
+	[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
+	[MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */
+	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
+};
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("r_clk", &r_clk),
+	CLKDEV_CON_ID("extalc1", &sh7377_extalc1_clk),
+	CLKDEV_CON_ID("extal2", &sh7377_extal2_clk),
+	CLKDEV_CON_ID("extalc1_div2_clk", &extalc1_div2_clk),
+	CLKDEV_CON_ID("extal2_div2_clk", &extal2_div2_clk),
+	CLKDEV_CON_ID("extal2_div4_clk", &extal2_div4_clk),
+	CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
+	CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
+	CLKDEV_CON_ID("pllc2_clk", &pllc2_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
+	CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
+	CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
+	CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
+	CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
+	CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
+	CLKDEV_CON_ID("z_clk", &div4_clks[DIV4_Z]),
+	CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
+	CLKDEV_CON_ID("zs_clk", &div4_clks[DIV4_ZS]),
+	CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
+	CLKDEV_CON_ID("zb3_clk", &div4_clks[DIV4_ZB3]),
+	CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
+
+	/* DIV6 clocks */
+	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
+	CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
+	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
+	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
+	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
+	CLKDEV_CON_ID("fsi_clk", &div6_clks[DIV6_FSI]),
+	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
+	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
+	CLKDEV_CON_ID("msu_clk", &div6_clks[DIV6_MSU]),
+	CLKDEV_CON_ID("mvi3_clk", &div6_clks[DIV6_MVI3]),
+	CLKDEV_CON_ID("hdmi_clk", &div6_clks[DIV6_HDMI]),
+	CLKDEV_CON_ID("mf1_clk", &div6_clks[DIV6_MF1]),
+	CLKDEV_CON_ID("mf2_clk", &div6_clks[DIV6_MF2]),
+	CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]),
+	CLKDEV_CON_ID("dsip_clk", &div6_clks[DIV6_DSIP]),
+
+	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.6", &mstp_clks[MSTP223]), /* SPU2DSP0 */
+	CLKDEV_DEV_ID("uio_pdrv_genirq.7", &mstp_clks[MSTP223]), /* SPU2DSP1 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP206]), /* SCIFB */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
+	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
+	CLKDEV_DEV_ID("sh_irda", &mstp_clks[MSTP325]), /* IRDA */
+	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USBHS */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USBHS */
+	CLKDEV_DEV_ID("sh_flctl", &mstp_clks[MSTP315]), /* FLCTL */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
+	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
+	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+};
+
+void __init sh7377_clock_init(void)
+{
+	int k, ret = 0;
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		clk_init();
+	else
+		panic("failed to setup sh7377 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
new file mode 100644
index 000000000000..6b7c7c42bc8f
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock.c
@@ -0,0 +1,46 @@
+/*
+ * SH-Mobile Clock Framework
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sh_clk.h>
+
+int __init clk_init(void)
+{
+	/* Kick the child clocks.. */
+	recalculate_root_clocks();
+
+	/* Enable the necessary init clocks */
+	clk_enable_init_clocks();
+
+	return 0;
+}
+
+int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 57903605cc51..efeef778a875 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -3,21 +3,31 @@
 
 extern struct sys_timer shmobile_timer;
 extern void shmobile_setup_console(void);
+struct clk;
+extern int clk_init(void);
 
 extern void sh7367_init_irq(void);
 extern void sh7367_add_early_devices(void);
 extern void sh7367_add_standard_devices(void);
 extern void sh7367_clock_init(void);
 extern void sh7367_pinmux_init(void);
+extern struct clk sh7367_extalb1_clk;
+extern struct clk sh7367_extal2_clk;
 
 extern void sh7377_init_irq(void);
 extern void sh7377_add_early_devices(void);
 extern void sh7377_add_standard_devices(void);
+extern void sh7377_clock_init(void);
 extern void sh7377_pinmux_init(void);
+extern struct clk sh7377_extalc1_clk;
+extern struct clk sh7377_extal2_clk;
 
 extern void sh7372_init_irq(void);
 extern void sh7372_add_early_devices(void);
 extern void sh7372_add_standard_devices(void);
+extern void sh7372_clock_init(void);
 extern void sh7372_pinmux_init(void);
+extern struct clk sh7372_extal1_clk;
+extern struct clk sh7372_extal2_clk;
 
 #endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index 5179b72e1ee3..fa15b5f8a001 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -2,9 +2,14 @@
 #define __ASM_MACH_IRQS_H
 
 #define NR_IRQS         512
-#define NR_IRQS_LEGACY  8
 
+/* INTCA */
 #define evt2irq(evt)		(((evt) >> 5) - 16)
 #define irq2evt(irq)		(((irq) + 16) << 5)
 
+/* INTCS */
+#define INTCS_VECT_BASE		0x2200
+#define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
+#define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
+
 #endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
index e188183f4dce..377584e57e03 100644
--- a/arch/arm/mach-shmobile/include/mach/memory.h
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -4,4 +4,7 @@
 #define PHYS_OFFSET	UL(CONFIG_MEMORY_START)
 #define MEM_SIZE	UL(CONFIG_MEMORY_SIZE)
 
+/* DMA memory at 0xf6000000 - 0xffdfffff */
+#define CONSISTENT_DMA_SIZE (158 << 20)
+
 #endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index dc34f00c56b8..147775a94bce 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_SH7372_H__
 #define __ASM_SH7372_H__
 
+#include <linux/sh_clk.h>
+
 /*
  * Pin Function Controller:
  *	GPIO_FN_xx - GPIO used to select pin function
@@ -431,4 +433,36 @@ enum {
 	GPIO_FN_SDENC_DV_CLKI,
 };
 
+/* DMA slave IDs */
+enum {
+	SHDMA_SLAVE_SCIF0_TX,
+	SHDMA_SLAVE_SCIF0_RX,
+	SHDMA_SLAVE_SCIF1_TX,
+	SHDMA_SLAVE_SCIF1_RX,
+	SHDMA_SLAVE_SCIF2_TX,
+	SHDMA_SLAVE_SCIF2_RX,
+	SHDMA_SLAVE_SCIF3_TX,
+	SHDMA_SLAVE_SCIF3_RX,
+	SHDMA_SLAVE_SCIF4_TX,
+	SHDMA_SLAVE_SCIF4_RX,
+	SHDMA_SLAVE_SCIF5_TX,
+	SHDMA_SLAVE_SCIF5_RX,
+	SHDMA_SLAVE_SCIF6_TX,
+	SHDMA_SLAVE_SCIF6_RX,
+	SHDMA_SLAVE_SDHI0_RX,
+	SHDMA_SLAVE_SDHI0_TX,
+	SHDMA_SLAVE_SDHI1_RX,
+	SHDMA_SLAVE_SDHI1_TX,
+	SHDMA_SLAVE_SDHI2_RX,
+	SHDMA_SLAVE_SDHI2_TX,
+};
+
+extern struct clk sh7372_extal1_clk;
+extern struct clk sh7372_extal2_clk;
+extern struct clk sh7372_dv_clki_clk;
+extern struct clk sh7372_dv_clki_div2_clk;
+extern struct clk sh7372_pllc2_clk;
+extern struct clk sh7372_fsiack_clk;
+extern struct clk sh7372_fsibck_clk;
+
 #endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
index fb3c4f1ab252..4aecf6e3a859 100644
--- a/arch/arm/mach-shmobile/include/mach/vmalloc.h
+++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h
@@ -1,6 +1,7 @@
 #ifndef __ASM_MACH_VMALLOC_H
 #define __ASM_MACH_VMALLOC_H
 
-#define VMALLOC_END       (PAGE_OFFSET + 0x24000000)
+/* Vmalloc at ... - 0xe5ffffff */
+#define VMALLOC_END 0xe6000000
 
 #endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c
index 5ff70cadfc32..1a20c489b20d 100644
--- a/arch/arm/mach-shmobile/intc-sh7367.c
+++ b/arch/arm/mach-shmobile/intc-sh7367.c
@@ -75,7 +75,7 @@ enum {
 	ETM11, ARM11, USBHS, FLCTL, IIC1
 };
 
-static struct intc_vect intca_vectors[] = {
+static struct intc_vect intca_vectors[] __initdata = {
 	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
 	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
 	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
@@ -162,7 +162,7 @@ static struct intc_group intca_groups[] __initdata = {
 	INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
 };
 
-static struct intc_mask_reg intca_mask_registers[] = {
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
 	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
 	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
 	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
@@ -211,7 +211,7 @@ static struct intc_mask_reg intca_mask_registers[] = {
 	    MISTY, CMT3, RWDT1, RWDT0 } },
 };
 
-static struct intc_prio_reg intca_prio_registers[] = {
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
 	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
 	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
 	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
@@ -263,8 +263,178 @@ static struct intc_desc intca_desc __initdata = {
 			   intca_sense_registers, intca_ack_registers),
 };
 
+enum {
+	UNUSED_INTCS = 0,
+
+	INTCS,
+
+	/* interrupt sources INTCS */
+	VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3,
+	VIO3_VOU,
+	RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
+	VIO1_CEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2,
+	VPU,
+	SGX530,
+	_2DDMAC_2DDM0, _2DDMAC_2DDM1, _2DDMAC_2DDM2, _2DDMAC_2DDM3,
+	IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
+	IPMMU_IPMMUB, IPMMU_IPMMUS,
+	RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
+	MSIOF,
+	IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
+	TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
+	CMT,
+	TSIF,
+	IPMMUI,
+	MVI3,
+	ICB,
+	PEP,
+	ASA,
+	BEM,
+	VE2HO,
+	HQE,
+	JPEG,
+	LCDC,
+
+	/* interrupt groups INTCS */
+	_2DDMAC, RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2,
+};
+
+static struct intc_vect intcs_vectors[] = {
+	INTCS_VECT(VIO2_VEU0, 0x700), INTCS_VECT(VIO2_VEU1, 0x720),
+	INTCS_VECT(VIO2_VEU2, 0x740), INTCS_VECT(VIO2_VEU3, 0x760),
+	INTCS_VECT(VIO3_VOU, 0x780),
+	INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
+	INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
+	INTCS_VECT(VIO1_CEU, 0x880), INTCS_VECT(VIO1_BEU0, 0x8a0),
+	INTCS_VECT(VIO1_BEU1, 0x8c0), INTCS_VECT(VIO1_BEU2, 0x8e0),
+	INTCS_VECT(VPU, 0x980),
+	INTCS_VECT(SGX530, 0x9e0),
+	INTCS_VECT(_2DDMAC_2DDM0, 0xa00), INTCS_VECT(_2DDMAC_2DDM1, 0xa20),
+	INTCS_VECT(_2DDMAC_2DDM2, 0xa40), INTCS_VECT(_2DDMAC_2DDM3, 0xa60),
+	INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
+	INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
+	INTCS_VECT(IPMMU_IPMMUB, 0xb20), INTCS_VECT(IPMMU_IPMMUS, 0xb60),
+	INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
+	INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
+	INTCS_VECT(MSIOF, 0xd20),
+	INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
+	INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
+	INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
+	INTCS_VECT(TMU_TUNI2, 0xec0),
+	INTCS_VECT(CMT, 0xf00),
+	INTCS_VECT(TSIF, 0xf20),
+	INTCS_VECT(IPMMUI, 0xf60),
+	INTCS_VECT(MVI3, 0x420),
+	INTCS_VECT(ICB, 0x480),
+	INTCS_VECT(PEP, 0x4a0),
+	INTCS_VECT(ASA, 0x4c0),
+	INTCS_VECT(BEM, 0x4e0),
+	INTCS_VECT(VE2HO, 0x520),
+	INTCS_VECT(HQE, 0x540),
+	INTCS_VECT(JPEG, 0x560),
+	INTCS_VECT(LCDC, 0x580),
+
+	INTC_VECT(INTCS, 0xf80),
+};
+
+static struct intc_group intcs_groups[] __initdata = {
+	INTC_GROUP(_2DDMAC, _2DDMAC_2DDM0, _2DDMAC_2DDM1,
+		   _2DDMAC_2DDM2, _2DDMAC_2DDM3),
+	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1,
+		   RTDMAC_1_DEI2, RTDMAC_1_DEI3),
+	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR),
+	INTC_GROUP(VEU, VIO2_VEU0, VIO2_VEU1, VIO2_VEU2, VIO2_VEU3),
+	INTC_GROUP(BEU, VIO1_BEU0, VIO1_BEU1, VIO1_BEU2),
+	INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
+	INTC_GROUP(IPMMU, IPMMU_IPMMUS, IPMMU_IPMMUB),
+	INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] = {
+	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
+	  { VIO1_BEU2, VIO1_BEU1, VIO1_BEU0, VIO1_CEU,
+	    VIO2_VEU3, VIO2_VEU2, VIO2_VEU1, VIO2_VEU0 } },
+	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
+	  { VIO3_VOU, 0, VE2HO, VPU,
+	    0, 0, 0, 0 } },
+	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
+	  { _2DDMAC_2DDM3, _2DDMAC_2DDM2, _2DDMAC_2DDM1, _2DDMAC_2DDM0,
+	    BEM, ASA, PEP, ICB } },
+	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
+	  { 0, 0, MVI3, 0,
+	    JPEG, HQE, 0, LCDC } },
+	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
+	  { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4,
+	    RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
+	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
+	  { 0, 0, MSIOF, 0,
+	    SGX530, 0, 0, 0 } },
+	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
+	  { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
+	    0, 0, 0, 0 } },
+	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
+	  { 0, 0, 0, CMT,
+	    IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
+	{ 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */
+	  { IPMMU_IPMMUS, 0, IPMMU_IPMMUB, 0,
+	    0, 0, 0, 0 } },
+	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
+	  { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
+	    0, 0, IPMMUI, TSIF } },
+	{ 0xffd20104, 0, 16, /* INTAMASK */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, INTCS } },
+};
+
+/* Priority is needed for INTCA to receive the INTCS interrupt */
+static struct intc_prio_reg intcs_prio_registers[] = {
+	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { 0, MVI3, _2DDMAC, ICB } },
+	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPEG, LCDC, 0, 0 } },
+	{ 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } },
+	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, VIO1_CEU, 0, VPU } },
+	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT } },
+	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1,
+					      TMU_TUNI2, 0 } },
+	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, VIO3_VOU, VEU, BEU } },
+	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF, IIC0 } },
+	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, SGX530, 0, 0 } },
+	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { BEM, ASA, IPMMUI, PEP } },
+	{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, VE2HO, HQE } },
+	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
+};
+
+static struct resource intcs_resources[] __initdata = {
+	[0] = {
+		.start	= 0xffd20000,
+		.end	= 0xffd2ffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct intc_desc intcs_desc __initdata = {
+	.name = "sh7367-intcs",
+	.resource = intcs_resources,
+	.num_resources = ARRAY_SIZE(intcs_resources),
+	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
+			   intcs_prio_registers, NULL, NULL),
+};
+
+static void intcs_demux(unsigned int irq, struct irq_desc *desc)
+{
+	void __iomem *reg = (void *)get_irq_data(irq);
+	unsigned int evtcodeas = ioread32(reg);
+
+	generic_handle_irq(intcs_evt2irq(evtcodeas));
+}
+
 void __init sh7367_init_irq(void)
 {
-	/* INTCA */
+	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+
 	register_intc_controller(&intca_desc);
+	register_intc_controller(&intcs_desc);
+
+	/* demux using INTEVTSA */
+	set_irq_data(evt2irq(0xf80), (void *)intevtsa);
+	set_irq_chained_handler(evt2irq(0xf80), intcs_demux);
 }
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 3ce9d9bd5899..4cd3cae38e72 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -319,17 +319,17 @@ static struct intc_prio_reg intca_prio_registers[] __initdata = {
 	{ 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
 	{ 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
 					       CMT14, CMT15 } },
-	{ 0xe694003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
+	{ 0xe695003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
 					       MMC_MMC_ERR, MMC_MMC_NOR } },
-	{ 0xe6940040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
+	{ 0xe6950040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
 					       IIC4_WAITI4, IIC4_DTEI4 } },
-	{ 0xe6940044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
+	{ 0xe6950044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
 					       IIC3_WAITI3, IIC3_DTEI3 } },
-	{ 0xe6940048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
+	{ 0xe6950048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
 					       0/*TXI*/, 0/*TEI*/} },
-	{ 0xe694004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
+	{ 0xe695004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
 					       USB1_USB1I1, USB1_USB1I0 } },
-	{ 0xe6940050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
+	{ 0xe6950050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
 };
 
 static struct intc_sense_reg intca_sense_registers[] __initdata = {
@@ -363,7 +363,255 @@ static struct intc_desc intca_desc __initdata = {
 			   intca_sense_registers, intca_ack_registers),
 };
 
+enum {
+	UNUSED_INTCS = 0,
+
+	INTCS,
+
+	/* interrupt sources INTCS */
+
+	/* IRQ0S - IRQ31S */
+	VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3,
+	RTDMAC_1_DEI0, RTDMAC_1_DEI1, RTDMAC_1_DEI2, RTDMAC_1_DEI3,
+	CEU, BEU_BEU0, BEU_BEU1, BEU_BEU2,
+	/* MFI */
+	/* BBIF2 */
+	VPU,
+	TSIF1,
+	_3DG_SGX530,
+	_2DDMAC,
+	IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
+	IPMMU_IPMMUR, IPMMU_IPMMUR2,
+	RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR,
+	/* KEYSC */
+	/* TTI20 */
+	MSIOF,
+	IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
+	TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
+	CMT0,
+	TSIF0,
+	/* CMT2 */
+	LMB,
+	CTI,
+	/* RWDT0 */
+	ICB,
+	JPU_JPEG,
+	LCDC,
+	LCRC,
+	RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
+	RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR,
+	ISP,
+	LCDC1,
+	CSIRX,
+	DSITX_DSITX0,
+	DSITX_DSITX1,
+	/* SPU2 */
+	/* FSI */
+	/* FMSI */
+	/* HDMI */
+	TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
+	CMT4,
+	DSITX1_DSITX1_0,
+	DSITX1_DSITX1_1,
+	/* MFIS2 */
+	CPORTS2R,
+	/* CEC */
+	JPU6E,
+
+	/* interrupt groups INTCS */
+	RTDMAC_1, RTDMAC_2, VEU, BEU, IIC0, IPMMU, IIC2,
+	RTDMAC2_1, RTDMAC2_2, TMU1, DSITX,
+};
+
+static struct intc_vect intcs_vectors[] = {
+	/* IRQ0S - IRQ31S */
+	INTCS_VECT(VEU_VEU0, 0x700), INTCS_VECT(VEU_VEU1, 0x720),
+	INTCS_VECT(VEU_VEU2, 0x740), INTCS_VECT(VEU_VEU3, 0x760),
+	INTCS_VECT(RTDMAC_1_DEI0, 0x800), INTCS_VECT(RTDMAC_1_DEI1, 0x820),
+	INTCS_VECT(RTDMAC_1_DEI2, 0x840), INTCS_VECT(RTDMAC_1_DEI3, 0x860),
+	INTCS_VECT(CEU, 0x880), INTCS_VECT(BEU_BEU0, 0x8a0),
+	INTCS_VECT(BEU_BEU1, 0x8c0), INTCS_VECT(BEU_BEU2, 0x8e0),
+	/* MFI */
+	/* BBIF2 */
+	INTCS_VECT(VPU, 0x980),
+	INTCS_VECT(TSIF1, 0x9a0),
+	INTCS_VECT(_3DG_SGX530, 0x9e0),
+	INTCS_VECT(_2DDMAC, 0xa00),
+	INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
+	INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
+	INTCS_VECT(IPMMU_IPMMUR, 0xb00), INTCS_VECT(IPMMU_IPMMUR2, 0xb20),
+	INTCS_VECT(RTDMAC_2_DEI4, 0xb80), INTCS_VECT(RTDMAC_2_DEI5, 0xba0),
+	INTCS_VECT(RTDMAC_2_DADERR, 0xbc0),
+	/* KEYSC */
+	/* TTI20 */
+	INTCS_VECT(MSIOF, 0x0d20),
+	INTCS_VECT(IIC0_ALI0, 0xe00), INTCS_VECT(IIC0_TACKI0, 0xe20),
+	INTCS_VECT(IIC0_WAITI0, 0xe40), INTCS_VECT(IIC0_DTEI0, 0xe60),
+	INTCS_VECT(TMU_TUNI0, 0xe80), INTCS_VECT(TMU_TUNI1, 0xea0),
+	INTCS_VECT(TMU_TUNI2, 0xec0),
+	INTCS_VECT(CMT0, 0xf00),
+	INTCS_VECT(TSIF0, 0xf20),
+	/* CMT2 */
+	INTCS_VECT(LMB, 0xf60),
+	INTCS_VECT(CTI, 0x400),
+	/* RWDT0 */
+	INTCS_VECT(ICB, 0x480),
+	INTCS_VECT(JPU_JPEG, 0x560),
+	INTCS_VECT(LCDC, 0x580),
+	INTCS_VECT(LCRC, 0x5a0),
+	INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320),
+	INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360),
+	INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13a0),
+	INTCS_VECT(RTDMAC2_2_DADERR, 0x13c0),
+	INTCS_VECT(ISP, 0x1720),
+	INTCS_VECT(LCDC1, 0x1780),
+	INTCS_VECT(CSIRX, 0x17a0),
+	INTCS_VECT(DSITX_DSITX0, 0x17c0),
+	INTCS_VECT(DSITX_DSITX1, 0x17e0),
+	/* SPU2 */
+	/* FSI */
+	/* FMSI */
+	/* HDMI */
+	INTCS_VECT(TMU1_TUNI0, 0x1900), INTCS_VECT(TMU1_TUNI1, 0x1920),
+	INTCS_VECT(TMU1_TUNI2, 0x1940),
+	INTCS_VECT(CMT4, 0x1980),
+	INTCS_VECT(DSITX1_DSITX1_0, 0x19a0),
+	INTCS_VECT(DSITX1_DSITX1_1, 0x19c0),
+	/* MFIS2 */
+	INTCS_VECT(CPORTS2R, 0x1a20),
+	/* CEC */
+	INTCS_VECT(JPU6E, 0x1a80),
+
+	INTC_VECT(INTCS, 0xf80),
+};
+
+static struct intc_group intcs_groups[] __initdata = {
+	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI0, RTDMAC_1_DEI1,
+		   RTDMAC_1_DEI2, RTDMAC_1_DEI3),
+	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI4, RTDMAC_2_DEI5, RTDMAC_2_DADERR),
+	INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3),
+	INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2),
+	INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
+	INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2),
+	INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
+	INTC_GROUP(RTDMAC2_1, RTDMAC2_1_DEI0, RTDMAC2_1_DEI1,
+		   RTDMAC2_1_DEI2, RTDMAC2_1_DEI3),
+	INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4,
+		   RTDMAC2_2_DEI5, RTDMAC2_2_DADERR),
+	INTC_GROUP(TMU1, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0),
+	INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] = {
+	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
+	  { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU,
+	    VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } },
+	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
+	  { 0, 0, 0, VPU,
+	    0, 0, 0, 0 } },
+	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
+	  { 0, 0, 0, _2DDMAC,
+	    0, 0, 0, ICB } },
+	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
+	  { 0, 0, 0, CTI,
+	    JPU_JPEG, 0, LCRC, LCDC } },
+	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
+	  { 0, RTDMAC_2_DADERR, RTDMAC_2_DEI5, RTDMAC_2_DEI4,
+	    RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
+	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
+	  { 0, 0, MSIOF, 0,
+	    _3DG_SGX530, 0, 0, 0 } },
+	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
+	  { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
+	    0, 0, 0, 0 } },
+	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
+	  { 0, 0, 0, CMT0,
+	    IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
+	{ 0xffd201a8, 0xffd201e8, 8, /* IMR10SA / IMCR10SA */
+	  { 0, 0, IPMMU_IPMMUR2, IPMMU_IPMMUR,
+	    0, 0, 0, 0 } },
+	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
+	  { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
+	    0, TSIF1, LMB, TSIF0 } },
+	{ 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */
+	  { 0, RTDMAC2_2_DADERR, RTDMAC2_2_DEI5, RTDMAC2_2_DEI4,
+	    RTDMAC2_1_DEI3, RTDMAC2_1_DEI2, RTDMAC2_1_DEI1, RTDMAC2_1_DEI0 } },
+	{ 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */
+	  { 0, ISP, 0, 0,
+	    LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } },
+	{ 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */
+	  { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
+	    CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } },
+	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
+	  { 0, CPORTS2R, 0, 0,
+	    JPU6E, 0, 0, 0 } },
+	{ 0xffd20104, 0, 16, /* INTAMASK */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, INTCS } },
+};
+
+/* Priority is needed for INTCA to receive the INTCS interrupt */
+static struct intc_prio_reg intcs_prio_registers[] = {
+	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC, ICB } },
+	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } },
+	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_1, CEU, 0, VPU } },
+	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { 0, RTDMAC_2, 0, CMT0 } },
+	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU_TUNI0, TMU_TUNI1,
+					      TMU_TUNI2, TSIF1 } },
+	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } },
+	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } },
+	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } },
+	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } },
+	{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } },
+	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },
+	{ 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC2_1, 0, 0, 0 } },
+	{ 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC2_2, 0, 0, 0 } },
+	{ 0xffd50020, 0, 16, 4, /* IPRIS3 */ { 0, ISP, 0, 0 } },
+	{ 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX, 0 } },
+	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } },
+	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0,
+					       DSITX1_DSITX1_1, 0 } },
+	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0, CPORTS2R, 0, 0 } },
+	{ 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } },
+};
+
+static struct resource intcs_resources[] __initdata = {
+	[0] = {
+		.start	= 0xffd20000,
+		.end	= 0xffd201ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0xffd50000,
+		.end	= 0xffd501ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct intc_desc intcs_desc __initdata = {
+	.name = "sh7372-intcs",
+	.resource = intcs_resources,
+	.num_resources = ARRAY_SIZE(intcs_resources),
+	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
+			   intcs_prio_registers, NULL, NULL),
+};
+
+static void intcs_demux(unsigned int irq, struct irq_desc *desc)
+{
+	void __iomem *reg = (void *)get_irq_data(irq);
+	unsigned int evtcodeas = ioread32(reg);
+
+	generic_handle_irq(intcs_evt2irq(evtcodeas));
+}
+
 void __init sh7372_init_irq(void)
 {
+	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+
 	register_intc_controller(&intca_desc);
+	register_intc_controller(&intcs_desc);
+
+	/* demux using INTEVTSA */
+	set_irq_data(evt2irq(0xf80), (void *)intevtsa);
+	set_irq_chained_handler(evt2irq(0xf80), intcs_demux);
 }
diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c
index 5c781e2d1897..2cdeb8ccd821 100644
--- a/arch/arm/mach-shmobile/intc-sh7377.c
+++ b/arch/arm/mach-shmobile/intc-sh7377.c
@@ -90,7 +90,7 @@ enum {
 	ICUSB, ICUDMC
 };
 
-static struct intc_vect intca_vectors[] = {
+static struct intc_vect intca_vectors[] __initdata = {
 	INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
 	INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
 	INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
@@ -202,7 +202,7 @@ static struct intc_group intca_groups[] __initdata = {
 	INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2),
 };
 
-static struct intc_mask_reg intca_mask_registers[] = {
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
 	{ 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
 	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
 	{ 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
@@ -272,7 +272,7 @@ static struct intc_mask_reg intca_mask_registers[] = {
 	    SCIFA6, 0, 0, 0 } },
 };
 
-static struct intc_prio_reg intca_prio_registers[] = {
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
 	{ 0xe6900010, 0, 32, 4, /* INTPRI00A */
 	  { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
 	{ 0xe6900014, 0, 32, 4, /* INTPRI10A */
@@ -346,7 +346,301 @@ static struct intc_desc intca_desc __initdata = {
 			   intca_sense_registers, intca_ack_registers),
 };
 
+/* this macro ignore entry which is also in INTCA */
+#define __IGNORE(a...)
+#define __IGNORE0(a...) 0
+
+enum {
+	UNUSED_INTCS = 0,
+
+	INTCS,
+
+	/* interrupt sources INTCS */
+	VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3,
+	RTDMAC1_1_DEI0, RTDMAC1_1_DEI1, RTDMAC1_1_DEI2, RTDMAC1_1_DEI3,
+	CEU,
+	BEU_BEU0, BEU_BEU1, BEU_BEU2,
+	__IGNORE(MFI)
+	__IGNORE(BBIF2)
+	VPU,
+	TSIF1,
+	__IGNORE(SGX540)
+	_2DDMAC,
+	IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
+	IPMMU_IPMMUR, IPMMU_IPMMUR2,
+	RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR,
+	__IGNORE(KEYSC)
+	__IGNORE(TTI20)
+	__IGNORE(MSIOF)
+	IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0,
+	TMU_TUNI0, TMU_TUNI1, TMU_TUNI2,
+	CMT0,
+	TSIF0,
+	__IGNORE(CMT2)
+	LMB,
+	__IGNORE(MSUG)
+	__IGNORE(MSU_MSU, MSU_MSU2)
+	__IGNORE(CTI)
+	MVI3,
+	__IGNORE(RWDT0)
+	__IGNORE(RWDT1)
+	ICB,
+	PEP,
+	ASA,
+	__IGNORE(_2DG)
+	HQE,
+	JPU,
+	LCDC0,
+	__IGNORE(LCRC)
+	RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
+	RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR,
+	FRC,
+	LCDC1,
+	CSIRX,
+	DSITX_DSITX0, DSITX_DSITX1,
+	__IGNORE(SPU2_SPU0, SPU2_SPU1)
+	__IGNORE(FSI)
+	__IGNORE(FMSI)
+	__IGNORE(SCUV)
+	TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12,
+	TSIF2,
+	CMT4,
+	__IGNORE(MFIS2)
+	CPORTS2R,
+
+	/* interrupt groups INTCS */
+	RTDMAC1_1, RTDMAC1_2, VEU, BEU, IIC0, __IGNORE(MSU) IPMMU,
+	IIC2, RTDMAC2_1, RTDMAC2_2, DSITX, __IGNORE(SPU2) TMU1,
+};
+
+#define INTCS_INTVECT 0x0F80
+static struct intc_vect intcs_vectors[] __initdata = {
+	INTCS_VECT(VEU_VEU0, 0x0700), INTCS_VECT(VEU_VEU1, 0x0720),
+	INTCS_VECT(VEU_VEU2, 0x0740), INTCS_VECT(VEU_VEU3, 0x0760),
+	INTCS_VECT(RTDMAC1_1_DEI0, 0x0800), INTCS_VECT(RTDMAC1_1_DEI1, 0x0820),
+	INTCS_VECT(RTDMAC1_1_DEI2, 0x0840), INTCS_VECT(RTDMAC1_1_DEI3, 0x0860),
+	INTCS_VECT(CEU, 0x0880),
+	INTCS_VECT(BEU_BEU0, 0x08A0),
+	INTCS_VECT(BEU_BEU1, 0x08C0),
+	INTCS_VECT(BEU_BEU2, 0x08E0),
+	__IGNORE(INTCS_VECT(MFI, 0x0900))
+	__IGNORE(INTCS_VECT(BBIF2, 0x0960))
+	INTCS_VECT(VPU, 0x0980),
+	INTCS_VECT(TSIF1, 0x09A0),
+	__IGNORE(INTCS_VECT(SGX540, 0x09E0))
+	INTCS_VECT(_2DDMAC, 0x0A00),
+	INTCS_VECT(IIC2_ALI2, 0x0A80), INTCS_VECT(IIC2_TACKI2, 0x0AA0),
+	INTCS_VECT(IIC2_WAITI2, 0x0AC0), INTCS_VECT(IIC2_DTEI2, 0x0AE0),
+	INTCS_VECT(IPMMU_IPMMUR, 0x0B00), INTCS_VECT(IPMMU_IPMMUR2, 0x0B20),
+	INTCS_VECT(RTDMAC1_2_DEI4, 0x0B80),
+	INTCS_VECT(RTDMAC1_2_DEI5, 0x0BA0),
+	INTCS_VECT(RTDMAC1_2_DADERR, 0x0BC0),
+	__IGNORE(INTCS_VECT(KEYSC 0x0BE0))
+	__IGNORE(INTCS_VECT(TTI20, 0x0C80))
+	__IGNORE(INTCS_VECT(MSIOF, 0x0D20))
+	INTCS_VECT(IIC0_ALI0, 0x0E00), INTCS_VECT(IIC0_TACKI0, 0x0E20),
+	INTCS_VECT(IIC0_WAITI0, 0x0E40), INTCS_VECT(IIC0_DTEI0, 0x0E60),
+	INTCS_VECT(TMU_TUNI0, 0x0E80),
+	INTCS_VECT(TMU_TUNI1, 0x0EA0),
+	INTCS_VECT(TMU_TUNI2, 0x0EC0),
+	INTCS_VECT(CMT0, 0x0F00),
+	INTCS_VECT(TSIF0, 0x0F20),
+	__IGNORE(INTCS_VECT(CMT2, 0x0F40))
+	INTCS_VECT(LMB, 0x0F60),
+	__IGNORE(INTCS_VECT(MSUG, 0x0F80))
+	__IGNORE(INTCS_VECT(MSU_MSU, 0x0FA0))
+	__IGNORE(INTCS_VECT(MSU_MSU2, 0x0FC0))
+	__IGNORE(INTCS_VECT(CTI, 0x0400))
+	INTCS_VECT(MVI3, 0x0420),
+	__IGNORE(INTCS_VECT(RWDT0, 0x0440))
+	__IGNORE(INTCS_VECT(RWDT1, 0x0460))
+	INTCS_VECT(ICB, 0x0480),
+	INTCS_VECT(PEP, 0x04A0),
+	INTCS_VECT(ASA, 0x04C0),
+	__IGNORE(INTCS_VECT(_2DG, 0x04E0))
+	INTCS_VECT(HQE, 0x0540),
+	INTCS_VECT(JPU, 0x0560),
+	INTCS_VECT(LCDC0, 0x0580),
+	__IGNORE(INTCS_VECT(LCRC, 0x05A0))
+	INTCS_VECT(RTDMAC2_1_DEI0, 0x1300), INTCS_VECT(RTDMAC2_1_DEI1, 0x1320),
+	INTCS_VECT(RTDMAC2_1_DEI2, 0x1340), INTCS_VECT(RTDMAC2_1_DEI3, 0x1360),
+	INTCS_VECT(RTDMAC2_2_DEI4, 0x1380), INTCS_VECT(RTDMAC2_2_DEI5, 0x13A0),
+	INTCS_VECT(RTDMAC2_2_DADERR, 0x13C0),
+	INTCS_VECT(FRC, 0x1700),
+	INTCS_VECT(LCDC1, 0x1780),
+	INTCS_VECT(CSIRX, 0x17A0),
+	INTCS_VECT(DSITX_DSITX0, 0x17C0), INTCS_VECT(DSITX_DSITX1, 0x17E0),
+	__IGNORE(INTCS_VECT(SPU2_SPU0, 0x1800))
+	__IGNORE(INTCS_VECT(SPU2_SPU1, 0x1820))
+	__IGNORE(INTCS_VECT(FSI, 0x1840))
+	__IGNORE(INTCS_VECT(FMSI, 0x1860))
+	__IGNORE(INTCS_VECT(SCUV, 0x1880))
+	INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920),
+	INTCS_VECT(TMU1_TUNI12, 0x1940),
+	INTCS_VECT(TSIF2, 0x1960),
+	INTCS_VECT(CMT4, 0x1980),
+	__IGNORE(INTCS_VECT(MFIS2, 0x1A00))
+	INTCS_VECT(CPORTS2R, 0x1A20),
+
+	INTC_VECT(INTCS, INTCS_INTVECT),
+};
+
+static struct intc_group intcs_groups[] __initdata = {
+	INTC_GROUP(RTDMAC1_1,
+		   RTDMAC1_1_DEI0, RTDMAC1_1_DEI1,
+		   RTDMAC1_1_DEI2, RTDMAC1_1_DEI3),
+	INTC_GROUP(RTDMAC1_2,
+		   RTDMAC1_2_DEI4, RTDMAC1_2_DEI5, RTDMAC1_2_DADERR),
+	INTC_GROUP(VEU, VEU_VEU0, VEU_VEU1, VEU_VEU2, VEU_VEU3),
+	INTC_GROUP(BEU, BEU_BEU0, BEU_BEU1, BEU_BEU2),
+	INTC_GROUP(IIC0, IIC0_ALI0, IIC0_TACKI0, IIC0_WAITI0, IIC0_DTEI0),
+	__IGNORE(INTC_GROUP(MSU, MSU_MSU, MSU_MSU2))
+	INTC_GROUP(IPMMU, IPMMU_IPMMUR, IPMMU_IPMMUR2),
+	INTC_GROUP(IIC2, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2),
+	INTC_GROUP(RTDMAC2_1,
+		   RTDMAC2_1_DEI0, RTDMAC2_1_DEI1,
+		   RTDMAC2_1_DEI2, RTDMAC2_1_DEI3),
+	INTC_GROUP(RTDMAC2_2, RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR),
+	INTC_GROUP(DSITX, DSITX_DSITX0, DSITX_DSITX1),
+	__IGNORE(INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1))
+	INTC_GROUP(TMU1, TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] __initdata = {
+	{ 0xE6940184, 0xE69401C4, 8, /* IMR1AS / IMCR1AS  */
+	  { BEU_BEU2, BEU_BEU1, BEU_BEU0, CEU,
+	    VEU_VEU3, VEU_VEU2, VEU_VEU1, VEU_VEU0 } },
+	{ 0xE6940188, 0xE69401C8, 8, /* IMR2AS / IMCR2AS */
+	  { 0, 0, 0, VPU,
+	    __IGNORE0(BBIF2), 0, 0, __IGNORE0(MFI) } },
+	{ 0xE694018C, 0xE69401CC, 8, /* IMR3AS / IMCR3AS */
+	  { 0, 0, 0, _2DDMAC,
+	    __IGNORE0(_2DG), ASA, PEP, ICB } },
+	{ 0xE6940190, 0xE69401D0, 8, /* IMR4AS / IMCR4AS */
+	  { 0, 0, MVI3, __IGNORE0(CTI),
+	    JPU, HQE, __IGNORE0(LCRC), LCDC0 } },
+	{ 0xE6940194, 0xE69401D4, 8, /* IMR5AS / IMCR5AS */
+	  { __IGNORE0(KEYSC), RTDMAC1_2_DADERR, RTDMAC1_2_DEI5, RTDMAC1_2_DEI4,
+	    RTDMAC1_1_DEI3, RTDMAC1_1_DEI2, RTDMAC1_1_DEI1, RTDMAC1_1_DEI0 } },
+	__IGNORE({ 0xE6940198, 0xE69401D8, 8, /* IMR6AS / IMCR6AS */
+	  { 0, 0, MSIOF, 0,
+	    SGX540, 0, TTI20, 0 } })
+	{ 0xE694019C, 0xE69401DC, 8, /* IMR7AS / IMCR7AS */
+	  { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
+	    0, 0, 0, 0 } },
+	__IGNORE({ 0xE69401A0, 0xE69401E0, 8, /* IMR8AS / IMCR8AS */
+	  { 0, 0, 0, 0,
+	    0, MSU_MSU, MSU_MSU2, MSUG } })
+	{ 0xE69401A4, 0xE69401E4, 8, /* IMR9AS / IMCR9AS */
+	  { __IGNORE0(RWDT1), __IGNORE0(RWDT0), __IGNORE0(CMT2), CMT0,
+	    IIC2_DTEI2, IIC2_WAITI2, IIC2_TACKI2, IIC2_ALI2 } },
+	{ 0xE69401A8, 0xE69401E8, 8, /* IMR10AS / IMCR10AS */
+	  { 0, 0, IPMMU_IPMMUR, IPMMU_IPMMUR2,
+	    0, 0, 0, 0 } },
+	{ 0xE69401AC, 0xE69401EC, 8, /* IMR11AS / IMCR11AS */
+	  { IIC0_DTEI0, IIC0_WAITI0, IIC0_TACKI0, IIC0_ALI0,
+	    0, TSIF1, LMB, TSIF0 } },
+	{ 0xE6950180, 0xE69501C0, 8, /* IMR0AS3 / IMCR0AS3 */
+	  { RTDMAC2_1_DEI0, RTDMAC2_1_DEI1, RTDMAC2_1_DEI2, RTDMAC2_1_DEI3,
+	    RTDMAC2_2_DEI4, RTDMAC2_2_DEI5, RTDMAC2_2_DADERR, 0 } },
+	{ 0xE6950190, 0xE69501D0, 8, /* IMR4AS3 / IMCR4AS3 */
+	  { FRC, 0, 0, 0,
+	    LCDC1, CSIRX, DSITX_DSITX0, DSITX_DSITX1 } },
+	__IGNORE({ 0xE6950194, 0xE69501D4, 8, /* IMR5AS3 / IMCR5AS3 */
+	  {SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+	   SCUV, 0, 0, 0 } })
+	{ 0xE6950198, 0xE69501D8, 8, /* IMR6AS3 / IMCR6AS3 */
+	  { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, TSIF2,
+	    CMT4, 0, 0, 0 } },
+	{ 0xE695019C, 0xE69501DC, 8, /* IMR7AS3 / IMCR7AS3 */
+	  { __IGNORE0(MFIS2), CPORTS2R, 0, 0,
+	    0, 0, 0, 0 } },
+	{ 0xFFD20104, 0, 16, /* INTAMASK */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, 0, INTCS } }
+};
+
+static struct intc_prio_reg intcs_prio_registers[] __initdata = {
+	/* IPRAS */
+	{ 0xFFD20000, 0, 16, 4, { __IGNORE0(CTI), MVI3, _2DDMAC, ICB } },
+	/* IPRBS */
+	{ 0xFFD20004, 0, 16, 4, { JPU, LCDC0, 0, __IGNORE0(LCRC) } },
+	/* IPRCS */
+	__IGNORE({ 0xFFD20008, 0, 16, 4, { BBIF2, 0, 0, 0 } })
+	/* IPRES */
+	{ 0xFFD20010, 0, 16, 4, { RTDMAC1_1, CEU, __IGNORE0(MFI), VPU } },
+	/* IPRFS */
+	{ 0xFFD20014, 0, 16, 4,
+	  { __IGNORE0(KEYSC), RTDMAC1_2, __IGNORE0(CMT2), CMT0 } },
+	/* IPRGS */
+	{ 0xFFD20018, 0, 16, 4, { TMU_TUNI0, TMU_TUNI1, TMU_TUNI2, TSIF1 } },
+	/* IPRHS */
+	{ 0xFFD2001C, 0, 16, 4, { __IGNORE0(TTI20), 0, VEU, BEU } },
+	/* IPRIS */
+	{ 0xFFD20020, 0, 16, 4, { 0, __IGNORE0(MSIOF), TSIF0, IIC0 } },
+	/* IPRJS */
+	__IGNORE({ 0xFFD20024, 0, 16, 4, { 0, SGX540, MSUG, MSU } })
+	/* IPRKS */
+	{ 0xFFD20028, 0, 16, 4, { __IGNORE0(_2DG), ASA, LMB, PEP } },
+	/* IPRLS */
+	{ 0xFFD2002C, 0, 16, 4, { IPMMU, 0, 0, HQE } },
+	/* IPRMS */
+	{ 0xFFD20030, 0, 16, 4,
+	  { IIC2, 0, __IGNORE0(RWDT1), __IGNORE0(RWDT0) } },
+	/* IPRAS3 */
+	{ 0xFFD50000, 0, 16, 4, { RTDMAC2_1, 0, 0, 0 } },
+	/* IPRBS3 */
+	{ 0xFFD50004, 0, 16, 4, { RTDMAC2_2, 0, 0, 0 } },
+	/* IPRIS3 */
+	{ 0xFFD50020, 0, 16, 4, { FRC, 0, 0, 0 } },
+	/* IPRJS3 */
+	{ 0xFFD50024, 0, 16, 4, { LCDC1, CSIRX, DSITX, 0 } },
+	/* IPRKS3 */
+	__IGNORE({ 0xFFD50028, 0, 16, 4, { SPU2, 0, FSI, FMSI } })
+	/* IPRLS3 */
+	__IGNORE({ 0xFFD5002C, 0, 16, 4, { SCUV, 0, 0, 0 } })
+	/* IPRMS3 */
+	{ 0xFFD50030, 0, 16, 4, { TMU1, 0, 0, TSIF2 } },
+	/* IPRNS3 */
+	{ 0xFFD50034, 0, 16, 4, { CMT4, 0, 0, 0 } },
+	/* IPROS3 */
+	{ 0xFFD50038, 0, 16, 4, { __IGNORE0(MFIS2), CPORTS2R, 0, 0 } },
+};
+
+static struct resource intcs_resources[] __initdata = {
+	[0] = {
+		.start	= 0xffd20000,
+		.end	= 0xffd500ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct intc_desc intcs_desc __initdata = {
+	.name = "sh7377-intcs",
+	.resource = intcs_resources,
+	.num_resources = ARRAY_SIZE(intcs_resources),
+	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups,
+			   intcs_mask_registers, intcs_prio_registers,
+			   NULL, NULL),
+};
+
+static void intcs_demux(unsigned int irq, struct irq_desc *desc)
+{
+	void __iomem *reg = (void *)get_irq_data(irq);
+	unsigned int evtcodeas = ioread32(reg);
+
+	generic_handle_irq(intcs_evt2irq(evtcodeas));
+}
+
+#define INTEVTSA 0xFFD20100
 void __init sh7377_init_irq(void)
 {
+	void __iomem *intevtsa = ioremap_nocache(INTEVTSA, PAGE_SIZE);
+
 	register_intc_controller(&intca_desc);
+	register_intc_controller(&intcs_desc);
+
+	/* demux using INTEVTSA */
+	set_irq_data(evt2irq(INTCS_INTVECT), (void *)intevtsa);
+	set_irq_chained_handler(evt2irq(INTCS_INTVECT), intcs_demux);
 }
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 9557d0964d73..9c265dae138a 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -166,12 +166,12 @@ enum {
 	MSIOF2_TSYNC_MARK,	MSIOF2_TSCK_MARK,	MSIOF2_RXD_MARK,
 	MSIOF2_TXD_MARK,
 
-	/* MSIOF3 */
+	/* BBIF1 */
 	BBIF1_RXD_MARK,		BBIF1_TSYNC_MARK,	BBIF1_TSCK_MARK,
 	BBIF1_TXD_MARK,		BBIF1_RSCK_MARK,	BBIF1_RSYNC_MARK,
 	BBIF1_FLOW_MARK,	BB_RX_FLOW_N_MARK,
 
-	/* MSIOF4 */
+	/* BBIF2 */
 	BBIF2_TSCK1_MARK,	BBIF2_TSYNC1_MARK,
 	BBIF2_TXD1_MARK,	BBIF2_RXD_MARK,
 
@@ -976,12 +976,12 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(MSIOF2_TSYNC),	GPIO_FN(MSIOF2_TSCK),	GPIO_FN(MSIOF2_RXD),
 	GPIO_FN(MSIOF2_TXD),
 
-	/* MSIOF3 */
+	/* BBIF1 */
 	GPIO_FN(BBIF1_RXD),	GPIO_FN(BBIF1_TSYNC),	GPIO_FN(BBIF1_TSCK),
 	GPIO_FN(BBIF1_TXD),	GPIO_FN(BBIF1_RSCK),	GPIO_FN(BBIF1_RSYNC),
 	GPIO_FN(BBIF1_FLOW),	GPIO_FN(BB_RX_FLOW_N),
 
-	/* MSIOF4 */
+	/* BBIF2 */
 	GPIO_FN(BBIF2_TSCK1),	GPIO_FN(BBIF2_TSYNC1),
 	GPIO_FN(BBIF2_TXD1),	GPIO_FN(BBIF2_RXD),
 
@@ -1160,6 +1160,9 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(LCDD18),	GPIO_FN(LCDD19),	GPIO_FN(LCDD20),
 	GPIO_FN(LCDD21),	GPIO_FN(LCDD22),	GPIO_FN(LCDD23),
 
+	GPIO_FN(LCDC0_SELECT),
+	GPIO_FN(LCDC1_SELECT),
+
 	/* IRDA */
 	GPIO_FN(IRDA_OUT),	GPIO_FN(IRDA_IN),	GPIO_FN(IRDA_FIRSEL),
 	GPIO_FN(IROUT_139),	GPIO_FN(IROUT_140),
diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c
new file mode 100644
index 000000000000..94912d3944d3
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm_runtime.c
@@ -0,0 +1,169 @@
+/*
+ * arch/arm/mach-shmobile/pm_runtime.c
+ *
+ * Runtime PM support code for SuperH Mobile ARM
+ *
+ *  Copyright (C) 2009-2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/sh_clk.h>
+#include <linux/bitmap.h>
+
+#ifdef CONFIG_PM_RUNTIME
+#define BIT_ONCE 0
+#define BIT_ACTIVE 1
+#define BIT_CLK_ENABLED 2
+
+struct pm_runtime_data {
+	unsigned long flags;
+	struct clk *clk;
+};
+
+static void __devres_release(struct device *dev, void *res)
+{
+	struct pm_runtime_data *prd = res;
+
+	dev_dbg(dev, "__devres_release()\n");
+
+	if (test_bit(BIT_CLK_ENABLED, &prd->flags))
+		clk_disable(prd->clk);
+
+	if (test_bit(BIT_ACTIVE, &prd->flags))
+		clk_put(prd->clk);
+}
+
+static struct pm_runtime_data *__to_prd(struct device *dev)
+{
+	return devres_find(dev, __devres_release, NULL, NULL);
+}
+
+static void platform_pm_runtime_init(struct device *dev,
+				     struct pm_runtime_data *prd)
+{
+	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
+		prd->clk = clk_get(dev, NULL);
+		if (!IS_ERR(prd->clk)) {
+			set_bit(BIT_ACTIVE, &prd->flags);
+			dev_info(dev, "clocks managed by runtime pm\n");
+		}
+	}
+}
+
+static void platform_pm_runtime_bug(struct device *dev,
+				    struct pm_runtime_data *prd)
+{
+	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
+		dev_err(dev, "runtime pm suspend before resume\n");
+}
+
+int platform_pm_runtime_suspend(struct device *dev)
+{
+	struct pm_runtime_data *prd = __to_prd(dev);
+
+	dev_dbg(dev, "platform_pm_runtime_suspend()\n");
+
+	platform_pm_runtime_bug(dev, prd);
+
+	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
+		clk_disable(prd->clk);
+		clear_bit(BIT_CLK_ENABLED, &prd->flags);
+	}
+
+	return 0;
+}
+
+int platform_pm_runtime_resume(struct device *dev)
+{
+	struct pm_runtime_data *prd = __to_prd(dev);
+
+	dev_dbg(dev, "platform_pm_runtime_resume()\n");
+
+	platform_pm_runtime_init(dev, prd);
+
+	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
+		clk_enable(prd->clk);
+		set_bit(BIT_CLK_ENABLED, &prd->flags);
+	}
+
+	return 0;
+}
+
+int platform_pm_runtime_idle(struct device *dev)
+{
+	/* suspend synchronously to disable clocks immediately */
+	return pm_runtime_suspend(dev);
+}
+
+static int platform_bus_notify(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct pm_runtime_data *prd;
+
+	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+
+	if (action == BUS_NOTIFY_BIND_DRIVER) {
+		prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL);
+		if (prd)
+			devres_add(dev, prd);
+		else
+			dev_err(dev, "unable to alloc memory for runtime pm\n");
+	}
+
+	return 0;
+}
+
+#else /* CONFIG_PM_RUNTIME */
+
+static int platform_bus_notify(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct clk *clk;
+
+	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+
+	switch (action) {
+	case BUS_NOTIFY_BIND_DRIVER:
+		clk = clk_get(dev, NULL);
+		if (!IS_ERR(clk)) {
+			clk_enable(clk);
+			clk_put(clk);
+			dev_info(dev, "runtime pm disabled, clock forced on\n");
+		}
+		break;
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		clk = clk_get(dev, NULL);
+		if (!IS_ERR(clk)) {
+			clk_disable(clk);
+			clk_put(clk);
+			dev_info(dev, "runtime pm disabled, clock forced off\n");
+		}
+		break;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_PM_RUNTIME */
+
+static struct notifier_block platform_bus_notifier = {
+	.notifier_call = platform_bus_notify
+};
+
+static int __init sh_pm_runtime_init(void)
+{
+	bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+	return 0;
+}
+core_initcall(sh_pm_runtime_init);
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
index eca90716140e..003008c18360 100644
--- a/arch/arm/mach-shmobile/setup-sh7367.c
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -31,11 +31,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xe6c40000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs		= { 80, 80, 80, 80 },
+	.irqs		= { evt2irq(0xc00), evt2irq(0xc00),
+			    evt2irq(0xc00), evt2irq(0xc00) },
 };
 
 static struct platform_device scif0_device = {
@@ -46,11 +48,13 @@ static struct platform_device scif0_device = {
 	},
 };
 
+/* SCIFA1 */
 static struct plat_sci_port scif1_platform_data = {
 	.mapbase	= 0xe6c50000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 81, 81, 81, 81 },
+	.irqs		= { evt2irq(0xc20), evt2irq(0xc20),
+			    evt2irq(0xc20), evt2irq(0xc20) },
 };
 
 static struct platform_device scif1_device = {
@@ -61,11 +65,13 @@ static struct platform_device scif1_device = {
 	},
 };
 
+/* SCIFA2 */
 static struct plat_sci_port scif2_platform_data = {
 	.mapbase	= 0xe6c60000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 82, 82, 82, 82 },
+	.irqs		= { evt2irq(0xc40), evt2irq(0xc40),
+			    evt2irq(0xc40), evt2irq(0xc40) },
 };
 
 static struct platform_device scif2_device = {
@@ -76,11 +82,13 @@ static struct platform_device scif2_device = {
 	},
 };
 
+/* SCIFA3 */
 static struct plat_sci_port scif3_platform_data = {
 	.mapbase	= 0xe6c70000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 83, 83, 83, 83 },
+	.irqs		= { evt2irq(0xc60), evt2irq(0xc60),
+			    evt2irq(0xc60), evt2irq(0xc60) },
 };
 
 static struct platform_device scif3_device = {
@@ -91,11 +99,13 @@ static struct platform_device scif3_device = {
 	},
 };
 
+/* SCIFA4 */
 static struct plat_sci_port scif4_platform_data = {
 	.mapbase	= 0xe6c80000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 89, 89, 89, 89 },
+	.irqs		= { evt2irq(0xd20), evt2irq(0xd20),
+			    evt2irq(0xd20), evt2irq(0xd20) },
 };
 
 static struct platform_device scif4_device = {
@@ -106,11 +116,13 @@ static struct platform_device scif4_device = {
 	},
 };
 
+/* SCIFA5 */
 static struct plat_sci_port scif5_platform_data = {
 	.mapbase	= 0xe6cb0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 90, 90, 90, 90 },
+	.irqs		= { evt2irq(0xd40), evt2irq(0xd40),
+			    evt2irq(0xd40), evt2irq(0xd40) },
 };
 
 static struct platform_device scif5_device = {
@@ -121,11 +133,13 @@ static struct platform_device scif5_device = {
 	},
 };
 
+/* SCIFB */
 static struct plat_sci_port scif6_platform_data = {
 	.mapbase	= 0xe6c30000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 91, 91, 91, 91 },
+	.irqs		= { evt2irq(0xd60), evt2irq(0xd60),
+			    evt2irq(0xd60), evt2irq(0xd60) },
 };
 
 static struct platform_device scif6_device = {
@@ -140,7 +154,6 @@ static struct sh_timer_config cmt10_platform_data = {
 	.name = "CMT10",
 	.channel_offset = 0x10,
 	.timer_bit = 0,
-	.clk = "r_clk",
 	.clockevent_rating = 125,
 	.clocksource_rating = 125,
 };
@@ -153,7 +166,7 @@ static struct resource cmt10_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 72,
+		.start	= evt2irq(0xb00), /* CMT1_CMT10 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 1d1153290f59..564a6d0be473 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -26,17 +26,21 @@
 #include <linux/input.h>
 #include <linux/io.h>
 #include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
 #include <linux/sh_intc.h>
 #include <linux/sh_timer.h>
 #include <mach/hardware.h>
+#include <mach/sh7372.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xe6c40000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs		= { 80, 80, 80, 80 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0c00), evt2irq(0x0c00),
+			    evt2irq(0x0c00), evt2irq(0x0c00) },
 };
 
 static struct platform_device scif0_device = {
@@ -47,11 +51,13 @@ static struct platform_device scif0_device = {
 	},
 };
 
+/* SCIFA1 */
 static struct plat_sci_port scif1_platform_data = {
 	.mapbase	= 0xe6c50000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 81, 81, 81, 81 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0c20), evt2irq(0x0c20),
+			    evt2irq(0x0c20), evt2irq(0x0c20) },
 };
 
 static struct platform_device scif1_device = {
@@ -62,11 +68,13 @@ static struct platform_device scif1_device = {
 	},
 };
 
+/* SCIFA2 */
 static struct plat_sci_port scif2_platform_data = {
 	.mapbase	= 0xe6c60000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 82, 82, 82, 82 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0c40), evt2irq(0x0c40),
+			    evt2irq(0x0c40), evt2irq(0x0c40) },
 };
 
 static struct platform_device scif2_device = {
@@ -77,11 +85,13 @@ static struct platform_device scif2_device = {
 	},
 };
 
+/* SCIFA3 */
 static struct plat_sci_port scif3_platform_data = {
 	.mapbase	= 0xe6c70000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 83, 83, 83, 83 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0c60), evt2irq(0x0c60),
+			    evt2irq(0x0c60), evt2irq(0x0c60) },
 };
 
 static struct platform_device scif3_device = {
@@ -92,11 +102,13 @@ static struct platform_device scif3_device = {
 	},
 };
 
+/* SCIFA4 */
 static struct plat_sci_port scif4_platform_data = {
 	.mapbase	= 0xe6c80000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 89, 89, 89, 89 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0d20), evt2irq(0x0d20),
+			    evt2irq(0x0d20), evt2irq(0x0d20) },
 };
 
 static struct platform_device scif4_device = {
@@ -107,11 +119,13 @@ static struct platform_device scif4_device = {
 	},
 };
 
+/* SCIFA5 */
 static struct plat_sci_port scif5_platform_data = {
 	.mapbase	= 0xe6cb0000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 90, 90, 90, 90 },
+	.type		= PORT_SCIFA,
+	.irqs		= { evt2irq(0x0d40), evt2irq(0x0d40),
+			    evt2irq(0x0d40), evt2irq(0x0d40) },
 };
 
 static struct platform_device scif5_device = {
@@ -122,11 +136,13 @@ static struct platform_device scif5_device = {
 	},
 };
 
+/* SCIFB */
 static struct plat_sci_port scif6_platform_data = {
 	.mapbase	= 0xe6c30000,
 	.flags		= UPF_BOOT_AUTOCONF,
-	.type		= PORT_SCIF,
-	.irqs           = { 91, 91, 91, 91 },
+	.type		= PORT_SCIFB,
+	.irqs		= { evt2irq(0x0d60), evt2irq(0x0d60),
+			    evt2irq(0x0d60), evt2irq(0x0d60) },
 };
 
 static struct platform_device scif6_device = {
@@ -137,11 +153,11 @@ static struct platform_device scif6_device = {
 	},
 };
 
+/* CMT */
 static struct sh_timer_config cmt10_platform_data = {
 	.name = "CMT10",
 	.channel_offset = 0x10,
 	.timer_bit = 0,
-	.clk = "r_clk",
 	.clockevent_rating = 125,
 	.clocksource_rating = 125,
 };
@@ -154,7 +170,7 @@ static struct resource cmt10_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 72,
+		.start	= evt2irq(0x0b00), /* CMT1_CMT10 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -169,6 +185,398 @@ static struct platform_device cmt10_device = {
 	.num_resources	= ARRAY_SIZE(cmt10_resources),
 };
 
+/* TMU */
+static struct sh_timer_config tmu00_platform_data = {
+	.name = "TMU00",
+	.channel_offset = 0x4,
+	.timer_bit = 0,
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu00_resources[] = {
+	[0] = {
+		.name	= "TMU00",
+		.start	= 0xfff60008,
+		.end	= 0xfff60013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0xe80), /* TMU_TUNI0 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu00_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu00_platform_data,
+	},
+	.resource	= tmu00_resources,
+	.num_resources	= ARRAY_SIZE(tmu00_resources),
+};
+
+static struct sh_timer_config tmu01_platform_data = {
+	.name = "TMU01",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu01_resources[] = {
+	[0] = {
+		.name	= "TMU01",
+		.start	= 0xfff60014,
+		.end	= 0xfff6001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0xea0), /* TMU_TUNI1 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu01_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu01_platform_data,
+	},
+	.resource	= tmu01_resources,
+	.num_resources	= ARRAY_SIZE(tmu01_resources),
+};
+
+/* I2C */
+static struct resource iic0_resources[] = {
+	[0] = {
+		.name	= "IIC0",
+		.start  = 0xFFF20000,
+		.end    = 0xFFF20425 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = intcs_evt2irq(0xe00), /* IIC0_ALI0 */
+		.end    = intcs_evt2irq(0xe60), /* IIC0_DTEI0 */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device iic0_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 0, /* "i2c0" clock */
+	.num_resources  = ARRAY_SIZE(iic0_resources),
+	.resource       = iic0_resources,
+};
+
+static struct resource iic1_resources[] = {
+	[0] = {
+		.name	= "IIC1",
+		.start  = 0xE6C20000,
+		.end    = 0xE6C20425 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x780), /* IIC1_ALI1 */
+		.end    = evt2irq(0x7e0), /* IIC1_DTEI1 */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device iic1_device = {
+	.name           = "i2c-sh_mobile",
+	.id             = 1, /* "i2c1" clock */
+	.num_resources  = ARRAY_SIZE(iic1_resources),
+	.resource       = iic1_resources,
+};
+
+/* DMA */
+/* Transmit sizes and respective CHCR register values */
+enum {
+	XMIT_SZ_8BIT		= 0,
+	XMIT_SZ_16BIT		= 1,
+	XMIT_SZ_32BIT		= 2,
+	XMIT_SZ_64BIT		= 7,
+	XMIT_SZ_128BIT		= 3,
+	XMIT_SZ_256BIT		= 4,
+	XMIT_SZ_512BIT		= 5,
+};
+
+/* log2(size / 8) - used to calculate number of transfers */
+#define TS_SHIFT {			\
+	[XMIT_SZ_8BIT]		= 0,	\
+	[XMIT_SZ_16BIT]		= 1,	\
+	[XMIT_SZ_32BIT]		= 2,	\
+	[XMIT_SZ_64BIT]		= 3,	\
+	[XMIT_SZ_128BIT]	= 4,	\
+	[XMIT_SZ_256BIT]	= 5,	\
+	[XMIT_SZ_512BIT]	= 6,	\
+}
+
+#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | \
+			 (((i) & 0xc) << (20 - 2)))
+
+static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_SCIF0_TX,
+		.addr		= 0xe6c40020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x21,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF0_RX,
+		.addr		= 0xe6c40024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x22,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_TX,
+		.addr		= 0xe6c50020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x25,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF1_RX,
+		.addr		= 0xe6c50024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x26,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_TX,
+		.addr		= 0xe6c60020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x29,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF2_RX,
+		.addr		= 0xe6c60024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2a,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF3_TX,
+		.addr		= 0xe6c70020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2d,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF3_RX,
+		.addr		= 0xe6c70024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x2e,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF4_TX,
+		.addr		= 0xe6c80020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x39,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF4_RX,
+		.addr		= 0xe6c80024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x3a,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF5_TX,
+		.addr		= 0xe6cb0020,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x35,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF5_RX,
+		.addr		= 0xe6cb0024,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x36,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF6_TX,
+		.addr		= 0xe6c30040,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x3d,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SCIF6_RX,
+		.addr		= 0xe6c30060,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
+		.mid_rid	= 0x3e,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
+		.addr		= 0xe6850030,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI0_RX,
+		.addr		= 0xe6850030,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc2,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI1_TX,
+		.addr		= 0xe6860030,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xc9,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI1_RX,
+		.addr		= 0xe6860030,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xca,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI2_TX,
+		.addr		= 0xe6870030,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xcd,
+	}, {
+		.slave_id	= SHDMA_SLAVE_SDHI2_RX,
+		.addr		= 0xe6870030,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
+		.mid_rid	= 0xce,
+	},
+};
+
+static const struct sh_dmae_channel sh7372_dmae_channels[] = {
+	{
+		.offset = 0,
+		.dmars = 0,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x10,
+		.dmars = 0,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x20,
+		.dmars = 4,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x30,
+		.dmars = 4,
+		.dmars_bit = 8,
+	}, {
+		.offset = 0x50,
+		.dmars = 8,
+		.dmars_bit = 0,
+	}, {
+		.offset = 0x60,
+		.dmars = 8,
+		.dmars_bit = 8,
+	}
+};
+
+static const unsigned int ts_shift[] = TS_SHIFT;
+
+static struct sh_dmae_pdata dma_platform_data = {
+	.slave		= sh7372_dmae_slaves,
+	.slave_num	= ARRAY_SIZE(sh7372_dmae_slaves),
+	.channel	= sh7372_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7372_dmae_channels),
+	.ts_low_shift	= 3,
+	.ts_low_mask	= 0x18,
+	.ts_high_shift	= (20 - 2),	/* 2 bits for shifted low TS */
+	.ts_high_mask	= 0x00300000,
+	.ts_shift	= ts_shift,
+	.ts_shift_num	= ARRAY_SIZE(ts_shift),
+	.dmaor_init	= DMAOR_DME,
+};
+
+/* Resource order important! */
+static struct resource sh7372_dmae0_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfe008020,
+		.end	= 0xfe00808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMARSx */
+		.start	= 0xfe009000,
+		.end	= 0xfe00900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMA error IRQ */
+		.start	= evt2irq(0x20c0),
+		.end	= evt2irq(0x20c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-5 */
+		.start	= evt2irq(0x2000),
+		.end	= evt2irq(0x20a0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* Resource order important! */
+static struct resource sh7372_dmae1_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfe018020,
+		.end	= 0xfe01808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMARSx */
+		.start	= 0xfe019000,
+		.end	= 0xfe01900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMA error IRQ */
+		.start	= evt2irq(0x21c0),
+		.end	= evt2irq(0x21c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-5 */
+		.start	= evt2irq(0x2100),
+		.end	= evt2irq(0x21a0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+/* Resource order important! */
+static struct resource sh7372_dmae2_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xfe028020,
+		.end	= 0xfe02808f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMARSx */
+		.start	= 0xfe029000,
+		.end	= 0xfe02900b,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* DMA error IRQ */
+		.start	= evt2irq(0x22c0),
+		.end	= evt2irq(0x22c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		/* IRQ for channels 0-5 */
+		.start	= evt2irq(0x2200),
+		.end	= evt2irq(0x22a0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dma0_device = {
+	.name		= "sh-dma-engine",
+	.id		= 0,
+	.resource	= sh7372_dmae0_resources,
+	.num_resources	= ARRAY_SIZE(sh7372_dmae0_resources),
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
+static struct platform_device dma1_device = {
+	.name		= "sh-dma-engine",
+	.id		= 1,
+	.resource	= sh7372_dmae1_resources,
+	.num_resources	= ARRAY_SIZE(sh7372_dmae1_resources),
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
+static struct platform_device dma2_device = {
+	.name		= "sh-dma-engine",
+	.id		= 2,
+	.resource	= sh7372_dmae2_resources,
+	.num_resources	= ARRAY_SIZE(sh7372_dmae2_resources),
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
 static struct platform_device *sh7372_early_devices[] __initdata = {
 	&scif0_device,
 	&scif1_device,
@@ -178,22 +586,29 @@ static struct platform_device *sh7372_early_devices[] __initdata = {
 	&scif5_device,
 	&scif6_device,
 	&cmt10_device,
+	&tmu00_device,
+	&tmu01_device,
+};
+
+static struct platform_device *sh7372_late_devices[] __initdata = {
+	&iic0_device,
+	&iic1_device,
+	&dma0_device,
+	&dma1_device,
+	&dma2_device,
 };
 
 void __init sh7372_add_standard_devices(void)
 {
 	platform_add_devices(sh7372_early_devices,
 			    ARRAY_SIZE(sh7372_early_devices));
-}
 
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR3_CMT1 (1 << 29)
+	platform_add_devices(sh7372_late_devices,
+			    ARRAY_SIZE(sh7372_late_devices));
+}
 
 void __init sh7372_add_early_devices(void)
 {
-	/* enable clock to CMT1 */
-	__raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
-
 	early_platform_add_devices(sh7372_early_devices,
 				   ARRAY_SIZE(sh7372_early_devices));
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
index 60e37774c35c..575dbd6c2f1d 100644
--- a/arch/arm/mach-shmobile/setup-sh7377.c
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -32,11 +32,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* SCIFA0 */
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xe6c40000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs		= { 80, 80, 80, 80 },
+	.irqs		= { evt2irq(0xc00), evt2irq(0xc00),
+			    evt2irq(0xc00), evt2irq(0xc00) },
 };
 
 static struct platform_device scif0_device = {
@@ -47,11 +49,13 @@ static struct platform_device scif0_device = {
 	},
 };
 
+/* SCIFA1 */
 static struct plat_sci_port scif1_platform_data = {
 	.mapbase	= 0xe6c50000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 81, 81, 81, 81 },
+	.irqs		= { evt2irq(0xc20), evt2irq(0xc20),
+			    evt2irq(0xc20), evt2irq(0xc20) },
 };
 
 static struct platform_device scif1_device = {
@@ -62,11 +66,13 @@ static struct platform_device scif1_device = {
 	},
 };
 
+/* SCIFA2 */
 static struct plat_sci_port scif2_platform_data = {
 	.mapbase	= 0xe6c60000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 82, 82, 82, 82 },
+	.irqs		= { evt2irq(0xc40), evt2irq(0xc40),
+			    evt2irq(0xc40), evt2irq(0xc40) },
 };
 
 static struct platform_device scif2_device = {
@@ -77,11 +83,13 @@ static struct platform_device scif2_device = {
 	},
 };
 
+/* SCIFA3 */
 static struct plat_sci_port scif3_platform_data = {
 	.mapbase	= 0xe6c70000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 83, 83, 83, 83 },
+	.irqs		= { evt2irq(0xc60), evt2irq(0xc60),
+			    evt2irq(0xc60), evt2irq(0xc60) },
 };
 
 static struct platform_device scif3_device = {
@@ -92,11 +100,13 @@ static struct platform_device scif3_device = {
 	},
 };
 
+/* SCIFA4 */
 static struct plat_sci_port scif4_platform_data = {
 	.mapbase	= 0xe6c80000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 89, 89, 89, 89 },
+	.irqs		= { evt2irq(0xd20), evt2irq(0xd20),
+			    evt2irq(0xd20), evt2irq(0xd20) },
 };
 
 static struct platform_device scif4_device = {
@@ -107,11 +117,13 @@ static struct platform_device scif4_device = {
 	},
 };
 
+/* SCIFA5 */
 static struct plat_sci_port scif5_platform_data = {
 	.mapbase	= 0xe6cb0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 90, 90, 90, 90 },
+	.irqs		= { evt2irq(0xd40), evt2irq(0xd40),
+			    evt2irq(0xd40), evt2irq(0xd40) },
 };
 
 static struct platform_device scif5_device = {
@@ -122,11 +134,13 @@ static struct platform_device scif5_device = {
 	},
 };
 
+/* SCIFA6 */
 static struct plat_sci_port scif6_platform_data = {
 	.mapbase	= 0xe6cc0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 196, 196, 196, 196 },
+	.irqs		= { intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80),
+			    intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80) },
 };
 
 static struct platform_device scif6_device = {
@@ -137,11 +151,13 @@ static struct platform_device scif6_device = {
 	},
 };
 
+/* SCIFB */
 static struct plat_sci_port scif7_platform_data = {
 	.mapbase	= 0xe6c30000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
-	.irqs           = { 91, 91, 91, 91 },
+	.irqs		= { evt2irq(0xd60), evt2irq(0xd60),
+			    evt2irq(0xd60), evt2irq(0xd60) },
 };
 
 static struct platform_device scif7_device = {
@@ -156,7 +172,6 @@ static struct sh_timer_config cmt10_platform_data = {
 	.name = "CMT10",
 	.channel_offset = 0x10,
 	.timer_bit = 0,
-	.clk = "r_clk",
 	.clockevent_rating = 125,
 	.clocksource_rating = 125,
 };
@@ -169,7 +184,7 @@ static struct resource cmt10_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 72,
+		.start	= evt2irq(0xb00), /* CMT1_CMT10 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c
index 39f6ccf22294..18febf92f20a 100644
--- a/arch/arm/mach-spear3xx/clock.c
+++ b/arch/arm/mach-spear3xx/clock.c
@@ -341,8 +341,11 @@ static struct clk gpio_clk = {
 	.recalc = &follow_parent,
 };
 
+static struct clk dummy_apb_pclk;
+
 /* array of all spear 3xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
+	{ .con_id = "apb_pclk",	.clk = &dummy_apb_pclk},
 	/* root clks */
 	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
 	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
index 13e27c769685..36ff056b7321 100644
--- a/arch/arm/mach-spear6xx/clock.c
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -428,8 +428,11 @@ static struct clk gpio2_clk = {
 	.recalc = &follow_parent,
 };
 
+static struct clk dummy_apb_pclk;
+
 /* array of all spear 6xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
+	{ .con_id = "apb_pclk",	.clk = &dummy_apb_pclk},
 	/* root clks */
 	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
 	{ .con_id = "osc_30m_clk",	.clk = &osc_30m_clk},
diff --git a/arch/arm/mach-stmp378x/stmp378x_devb.c b/arch/arm/mach-stmp378x/stmp378x_devb.c
index 90d8fe6f10fe..06158848afd9 100644
--- a/arch/arm/mach-stmp378x/stmp378x_devb.c
+++ b/arch/arm/mach-stmp378x/stmp378x_devb.c
@@ -324,8 +324,6 @@ static void __init stmp378x_devb_init(void)
 }
 
 MACHINE_START(STMP378X, "STMP378X")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x40000100,
 	.map_io		= stmp378x_map_io,
 	.init_irq	= stmp378x_init_irq,
diff --git a/arch/arm/mach-stmp37xx/stmp37xx_devb.c b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
index 394f21ab59e6..311d8552d362 100644
--- a/arch/arm/mach-stmp37xx/stmp37xx_devb.c
+++ b/arch/arm/mach-stmp37xx/stmp37xx_devb.c
@@ -91,8 +91,6 @@ static void __init stmp37xx_devb_init(void)
 }
 
 MACHINE_START(STMP37XX, "STMP37XX")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x40000100,
 	.map_io		= stmp37xx_map_io,
 	.init_irq	= stmp37xx_init_irq,
diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig
new file mode 100644
index 000000000000..ad86415d1577
--- /dev/null
+++ b/arch/arm/mach-tcc8k/Kconfig
@@ -0,0 +1,11 @@
+if ARCH_TCC8K
+
+comment "TCC8000 systems:"
+
+config MACH_TCC8000_SDK
+	bool "Telechips TCC8000-SDK development kit"
+	default y
+	help
+	  Support for the Telechips TCC8000-SDK board.
+
+endif
diff --git a/arch/arm/mach-tcc8k/Makefile b/arch/arm/mach-tcc8k/Makefile
new file mode 100644
index 000000000000..9bacf31e49ba
--- /dev/null
+++ b/arch/arm/mach-tcc8k/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for TCC8K boards and common files.
+#
+
+# Common support
+obj-y += clock.o irq.o time.o io.o devices.o
+
+# Board specific support
+obj-$(CONFIG_MACH_TCC8000_SDK) += board-tcc8000-sdk.o
diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot
new file mode 100644
index 000000000000..f135c9deae10
--- /dev/null
+++ b/arch/arm/mach-tcc8k/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y		:= 0x20008000
+params_phys-y		:= 0x20000100
+initrd_phys-y		:= 0x20800000
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
new file mode 100644
index 000000000000..7991415e666b
--- /dev/null
+++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/clock.h>
+
+#include "common.h"
+
+#define XI_FREQUENCY	12000000
+#define XTI_FREQUENCY	32768
+
+#ifdef CONFIG_MTD_NAND_TCC
+/* NAND */
+static struct tcc_nand_platform_data tcc8k_sdk_nand_data = {
+	.width = 1,
+	.hw_ecc = 0,
+};
+#endif
+
+static void __init tcc8k_init(void)
+{
+#ifdef CONFIG_MTD_NAND_TCC
+	tcc_nand_device.dev.platform_data = &tcc8k_sdk_nand_data;
+	platform_device_register(&tcc_nand_device);
+#endif
+}
+
+static void __init tcc8k_init_timer(void)
+{
+	tcc_clocks_init(XI_FREQUENCY, XTI_FREQUENCY);
+}
+
+static struct sys_timer tcc8k_timer = {
+	.init	= tcc8k_init_timer,
+};
+
+static void __init tcc8k_map_io(void)
+{
+	tcc8k_map_common_io();
+}
+
+MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= tcc8k_map_io,
+	.init_irq	= tcc8k_init_irq,
+	.init_machine	= tcc8k_init,
+	.timer		= &tcc8k_timer,
+MACHINE_END
diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c
new file mode 100644
index 000000000000..ba32a15127ab
--- /dev/null
+++ b/arch/arm/mach-tcc8k/clock.c
@@ -0,0 +1,567 @@
+/*
+ * Lowlevel clock handling for Telechips TCC8xxx SoCs
+ *
+ * Copyright (C) 2010 by Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/irqs.h>
+#include <mach/tcc8k-regs.h>
+
+#include "common.h"
+
+#define BCLKCTR0	(CKC_BASE + BCLKCTR0_OFFS)
+#define BCLKCTR1	(CKC_BASE + BCLKCTR1_OFFS)
+
+#define ACLKREF		(CKC_BASE + ACLKREF_OFFS)
+#define ACLKUART0	(CKC_BASE + ACLKUART0_OFFS)
+#define ACLKUART1	(CKC_BASE + ACLKUART1_OFFS)
+#define ACLKUART2	(CKC_BASE + ACLKUART2_OFFS)
+#define ACLKUART3	(CKC_BASE + ACLKUART3_OFFS)
+#define ACLKUART4	(CKC_BASE + ACLKUART4_OFFS)
+#define ACLKI2C		(CKC_BASE + ACLKI2C_OFFS)
+#define ACLKADC		(CKC_BASE + ACLKADC_OFFS)
+#define ACLKUSBH	(CKC_BASE + ACLKUSBH_OFFS)
+#define ACLKLCD		(CKC_BASE + ACLKLCD_OFFS)
+#define ACLKSDH0	(CKC_BASE + ACLKSDH0_OFFS)
+#define ACLKSDH1	(CKC_BASE + ACLKSDH1_OFFS)
+#define ACLKSPI0	(CKC_BASE + ACLKSPI0_OFFS)
+#define ACLKSPI1	(CKC_BASE + ACLKSPI1_OFFS)
+#define ACLKSPDIF	(CKC_BASE + ACLKSPDIF_OFFS)
+#define ACLKC3DEC	(CKC_BASE + ACLKC3DEC_OFFS)
+#define ACLKCAN0	(CKC_BASE + ACLKCAN0_OFFS)
+#define ACLKCAN1	(CKC_BASE + ACLKCAN1_OFFS)
+#define ACLKGSB0	(CKC_BASE + ACLKGSB0_OFFS)
+#define ACLKGSB1	(CKC_BASE + ACLKGSB1_OFFS)
+#define ACLKGSB2	(CKC_BASE + ACLKGSB2_OFFS)
+#define ACLKGSB3	(CKC_BASE + ACLKGSB3_OFFS)
+#define ACLKUSBH	(CKC_BASE + ACLKUSBH_OFFS)
+#define ACLKTCT		(CKC_BASE + ACLKTCT_OFFS)
+#define ACLKTCX		(CKC_BASE + ACLKTCX_OFFS)
+#define ACLKTCZ		(CKC_BASE + ACLKTCZ_OFFS)
+
+/* Crystal frequencies */
+static unsigned long xi_rate, xti_rate;
+
+static void __iomem *pll_cfg_addr(int pll)
+{
+	switch (pll) {
+	case 0: return (CKC_BASE + PLL0CFG_OFFS);
+	case 1: return (CKC_BASE + PLL1CFG_OFFS);
+	case 2: return (CKC_BASE + PLL2CFG_OFFS);
+	default:
+		BUG();
+	}
+}
+
+static int pll_enable(int pll, int enable)
+{
+	u32 reg;
+	void __iomem *addr = pll_cfg_addr(pll);
+
+	reg = __raw_readl(addr);
+	if (enable)
+		reg &= ~PLLxCFG_PD;
+	else
+		reg |= PLLxCFG_PD;
+
+	__raw_writel(reg, addr);
+	return 0;
+}
+
+static int xi_enable(int enable)
+{
+	u32 reg;
+
+	reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
+	if (enable)
+		reg |= CLKCTRL_XE;
+	else
+		reg &= ~CLKCTRL_XE;
+
+	__raw_writel(reg, CKC_BASE + CLKCTRL_OFFS);
+	return 0;
+}
+
+static int root_clk_enable(enum root_clks src)
+{
+	switch (src) {
+	case CLK_SRC_PLL0: return pll_enable(0, 1);
+	case CLK_SRC_PLL1: return pll_enable(1, 1);
+	case CLK_SRC_PLL2: return pll_enable(2, 1);
+	case CLK_SRC_XI: return xi_enable(1);
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+static int root_clk_disable(enum root_clks root_src)
+{
+	switch (root_src) {
+	case CLK_SRC_PLL0: return pll_enable(0, 0);
+	case CLK_SRC_PLL1: return pll_enable(1, 0);
+	case CLK_SRC_PLL2: return pll_enable(2, 0);
+	case CLK_SRC_XI: return xi_enable(0);
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+static int enable_clk(struct clk *clk)
+{
+	u32 reg;
+
+	if (clk->root_id != CLK_SRC_NOROOT)
+		return root_clk_enable(clk->root_id);
+
+	if (clk->aclkreg) {
+		reg = __raw_readl(clk->aclkreg);
+		reg |= ACLK_EN;
+		__raw_writel(reg, clk->aclkreg);
+	}
+	if (clk->bclkctr) {
+		reg = __raw_readl(clk->bclkctr);
+		reg |= 1 << clk->bclk_shift;
+		__raw_writel(reg, clk->bclkctr);
+	}
+	return 0;
+}
+
+static void disable_clk(struct clk *clk)
+{
+	u32 reg;
+
+	if (clk->root_id != CLK_SRC_NOROOT) {
+		root_clk_disable(clk->root_id);
+		return;
+	}
+
+	if (clk->bclkctr) {
+		reg = __raw_readl(clk->bclkctr);
+		reg &= ~(1 << clk->bclk_shift);
+		__raw_writel(reg, clk->bclkctr);
+	}
+	if (clk->aclkreg) {
+		reg = __raw_readl(clk->aclkreg);
+		reg &= ~ACLK_EN;
+		__raw_writel(reg, clk->aclkreg);
+	}
+}
+
+static unsigned long get_rate_pll(int pll)
+{
+	u32 reg;
+	unsigned long s, m, p;
+	void __iomem *addr = pll_cfg_addr(pll);
+
+	reg = __raw_readl(addr);
+	s = (reg >> 16) & 0x07;
+	m = (reg >> 8) & 0xff;
+	p = reg & 0x3f;
+
+	return (m * xi_rate) / (p * (1 << s));
+}
+
+static unsigned long get_rate_pll_div(int pll)
+{
+	u32 reg;
+	unsigned long div = 0;
+	void __iomem *addr;
+
+	switch (pll) {
+	case 0:
+		addr = CKC_BASE + CLKDIVC0_OFFS;
+		reg = __raw_readl(addr);
+		if (reg & CLKDIVC0_P0E)
+			div = (reg >> 24) & 0x3f;
+		break;
+	case 1:
+		addr = CKC_BASE + CLKDIVC0_OFFS;
+		reg = __raw_readl(addr);
+		if (reg & CLKDIVC0_P1E)
+			div = (reg >> 16) & 0x3f;
+		break;
+	case 2:
+		addr = CKC_BASE + CLKDIVC1_OFFS;
+		reg = __raw_readl(addr);
+		if (reg & CLKDIVC1_P2E)
+			div = __raw_readl(addr) & 0x3f;
+		break;
+	}
+	return get_rate_pll(pll) / (div + 1);
+}
+
+static unsigned long get_rate_xi_div(void)
+{
+	unsigned long div = 0;
+	u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
+
+	if (reg & CLKDIVC0_XE)
+		div = (reg >> 8) & 0x3f;
+
+	return xi_rate / (div + 1);
+}
+
+static unsigned long get_rate_xti_div(void)
+{
+	unsigned long div = 0;
+	u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
+
+	if (reg & CLKDIVC0_XTE)
+		div = reg & 0x3f;
+
+	return xti_rate / (div + 1);
+}
+
+static unsigned long root_clk_get_rate(enum root_clks src)
+{
+	switch (src) {
+	case CLK_SRC_PLL0: return get_rate_pll(0);
+	case CLK_SRC_PLL1: return get_rate_pll(1);
+	case CLK_SRC_PLL2: return get_rate_pll(2);
+	case CLK_SRC_PLL0DIV: return get_rate_pll_div(0);
+	case CLK_SRC_PLL1DIV: return get_rate_pll_div(1);
+	case CLK_SRC_PLL2DIV: return get_rate_pll_div(2);
+	case CLK_SRC_XI: return xi_rate;
+	case CLK_SRC_XTI: return xti_rate;
+	case CLK_SRC_XIDIV: return get_rate_xi_div();
+	case CLK_SRC_XTIDIV: return get_rate_xti_div();
+	default: return 0;
+	}
+}
+
+static unsigned long aclk_get_rate(struct clk *clk)
+{
+	u32 reg;
+	unsigned long div;
+	unsigned int src;
+
+	reg = __raw_readl(clk->aclkreg);
+	div = reg & 0x0fff;
+	src = (reg >> ACLK_SEL_SHIFT) & CLK_SRC_MASK;
+	return root_clk_get_rate(src) / (div + 1);
+}
+
+static unsigned long aclk_best_div(struct clk *clk, unsigned long rate)
+{
+	unsigned long div, src, freq, r1, r2;
+
+	src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
+	src &= CLK_SRC_MASK;
+	freq = root_clk_get_rate(src);
+	div = freq / rate + 1;
+	r1 = freq / div;
+	r2 = freq / (div + 1);
+	if (r2 >= rate)
+		return div + 1;
+	if ((rate - r2) < (r1 - rate))
+		return div + 1;
+
+	return div;
+}
+
+static unsigned long aclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int src;
+
+	src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
+	src &= CLK_SRC_MASK;
+
+	return root_clk_get_rate(src) / aclk_best_div(clk, rate);
+}
+
+static int aclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK;
+	reg |= aclk_best_div(clk, rate);
+	return 0;
+}
+
+static unsigned long get_rate_sys(struct clk *clk)
+{
+	unsigned int src;
+
+	src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK;
+		return root_clk_get_rate(src);
+}
+
+static unsigned long get_rate_bus(struct clk *clk)
+{
+	unsigned int div;
+
+	div = (__raw_readl(CKC_BASE + CLKCTRL_OFFS) >> 4) & 0xff;
+	return get_rate_sys(clk) / (div + 1);
+}
+
+static unsigned long get_rate_cpu(struct clk *clk)
+{
+	unsigned int reg, div, fsys, fbus;
+
+	fbus = get_rate_bus(clk);
+	reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
+	if (reg & (1 << 29))
+		return fbus;
+	fsys = get_rate_sys(clk);
+	div = (reg >> 16) & 0x0f;
+	return fbus + ((fsys - fbus) * (div + 1)) / 16;
+}
+
+static unsigned long get_rate_root(struct clk *clk)
+{
+	return root_clk_get_rate(clk->root_id);
+}
+
+static int aclk_set_parent(struct clk *clock, struct clk *parent)
+{
+	u32 reg;
+
+	if (clock->parent == parent)
+		return 0;
+
+	clock->parent = parent;
+
+	if (!parent)
+		return 0;
+
+	if (parent->root_id == CLK_SRC_NOROOT)
+		return 0;
+	reg = __raw_readl(clock->aclkreg);
+	reg &= ~ACLK_SEL_MASK;
+	reg |= (parent->root_id << ACLK_SEL_SHIFT) & ACLK_SEL_MASK;
+	__raw_writel(reg, clock->aclkreg);
+
+	return 0;
+}
+
+#define DEFINE_ROOT_CLOCK(name, ri, p)	\
+	static struct clk name = {		\
+		.root_id = ri,			\
+		.get_rate = get_rate_root,			\
+		.enable = enable_clk,		\
+		.disable = disable_clk,		\
+		.parent = p,			\
+	};
+
+#define DEFINE_SPECIAL_CLOCK(name, gr, p)	\
+	static struct clk name = {		\
+		.root_id = CLK_SRC_NOROOT,	\
+		.get_rate = gr,			\
+		.parent = p,			\
+	};
+
+#define DEFINE_ACLOCK(name, bc, bs, ar)		\
+	static struct clk name = {		\
+		.root_id = CLK_SRC_NOROOT,	\
+		.bclkctr = bc,			\
+		.bclk_shift = bs,		\
+		.aclkreg = ar,			\
+		.get_rate = aclk_get_rate,	\
+		.set_rate = aclk_set_rate,	\
+		.round_rate = aclk_round_rate,	\
+		.enable = enable_clk,		\
+		.disable = disable_clk,		\
+		.set_parent = aclk_set_parent,	\
+	};
+
+#define DEFINE_BCLOCK(name, bc, bs, gr, p)	\
+	static struct clk name = {		\
+		.root_id = CLK_SRC_NOROOT,	\
+		.bclkctr = bc,			\
+		.bclk_shift = bs,		\
+		.get_rate = gr,			\
+		.enable = enable_clk,		\
+		.disable = disable_clk,		\
+		.parent = p,			\
+	};
+
+DEFINE_ROOT_CLOCK(xi, CLK_SRC_XI, NULL)
+DEFINE_ROOT_CLOCK(xti, CLK_SRC_XTI, NULL)
+DEFINE_ROOT_CLOCK(xidiv, CLK_SRC_XIDIV, &xi)
+DEFINE_ROOT_CLOCK(xtidiv, CLK_SRC_XTIDIV, &xti)
+DEFINE_ROOT_CLOCK(pll0, CLK_SRC_PLL0, &xi)
+DEFINE_ROOT_CLOCK(pll1, CLK_SRC_PLL1, &xi)
+DEFINE_ROOT_CLOCK(pll2, CLK_SRC_PLL2, &xi)
+DEFINE_ROOT_CLOCK(pll0div, CLK_SRC_PLL0DIV, &pll0)
+DEFINE_ROOT_CLOCK(pll1div, CLK_SRC_PLL1DIV, &pll1)
+DEFINE_ROOT_CLOCK(pll2div, CLK_SRC_PLL2DIV, &pll2)
+
+/* The following 3 clocks are special and are initialized explicitly later */
+DEFINE_SPECIAL_CLOCK(sys, get_rate_sys, NULL)
+DEFINE_SPECIAL_CLOCK(bus, get_rate_bus, &sys)
+DEFINE_SPECIAL_CLOCK(cpu, get_rate_cpu, &sys)
+
+DEFINE_ACLOCK(tct, NULL, 0, ACLKTCT)
+DEFINE_ACLOCK(tcx, NULL, 0, ACLKTCX)
+DEFINE_ACLOCK(tcz, NULL, 0, ACLKTCZ)
+DEFINE_ACLOCK(ref, NULL, 0, ACLKREF)
+DEFINE_ACLOCK(uart0, BCLKCTR0, 5, ACLKUART0)
+DEFINE_ACLOCK(uart1, BCLKCTR0, 23, ACLKUART1)
+DEFINE_ACLOCK(uart2, BCLKCTR0, 6, ACLKUART2)
+DEFINE_ACLOCK(uart3, BCLKCTR0, 8, ACLKUART3)
+DEFINE_ACLOCK(uart4, BCLKCTR1, 6, ACLKUART4)
+DEFINE_ACLOCK(i2c, BCLKCTR0, 7, ACLKI2C)
+DEFINE_ACLOCK(adc, BCLKCTR0, 10, ACLKADC)
+DEFINE_ACLOCK(usbh0, BCLKCTR0, 11, ACLKUSBH)
+DEFINE_ACLOCK(lcd, BCLKCTR0, 13, ACLKLCD)
+DEFINE_ACLOCK(sd0, BCLKCTR0, 17, ACLKSDH0)
+DEFINE_ACLOCK(sd1, BCLKCTR1, 5, ACLKSDH1)
+DEFINE_ACLOCK(spi0, BCLKCTR0, 24, ACLKSPI0)
+DEFINE_ACLOCK(spi1, BCLKCTR0, 30, ACLKSPI1)
+DEFINE_ACLOCK(spdif, BCLKCTR1, 2, ACLKSPDIF)
+DEFINE_ACLOCK(c3dec, BCLKCTR1, 9, ACLKC3DEC)
+DEFINE_ACLOCK(can0, BCLKCTR1, 10, ACLKCAN0)
+DEFINE_ACLOCK(can1, BCLKCTR1, 11, ACLKCAN1)
+DEFINE_ACLOCK(gsb0, BCLKCTR1, 13, ACLKGSB0)
+DEFINE_ACLOCK(gsb1, BCLKCTR1, 14, ACLKGSB1)
+DEFINE_ACLOCK(gsb2, BCLKCTR1, 15, ACLKGSB2)
+DEFINE_ACLOCK(gsb3, BCLKCTR1, 16, ACLKGSB3)
+DEFINE_ACLOCK(usbh1, BCLKCTR1, 20, ACLKUSBH)
+
+DEFINE_BCLOCK(dai0, BCLKCTR0, 0, NULL, NULL)
+DEFINE_BCLOCK(pic, BCLKCTR0, 1, NULL, NULL)
+DEFINE_BCLOCK(tc, BCLKCTR0, 2, NULL, NULL)
+DEFINE_BCLOCK(gpio, BCLKCTR0, 3, NULL, NULL)
+DEFINE_BCLOCK(usbd, BCLKCTR0, 4, NULL, NULL)
+DEFINE_BCLOCK(ecc, BCLKCTR0, 9, NULL, NULL)
+DEFINE_BCLOCK(gdma0, BCLKCTR0, 12, NULL, NULL)
+DEFINE_BCLOCK(rtc, BCLKCTR0, 15, NULL, NULL)
+DEFINE_BCLOCK(nfc, BCLKCTR0, 16, NULL, NULL)
+DEFINE_BCLOCK(g2d, BCLKCTR0, 18, NULL, NULL)
+DEFINE_BCLOCK(gdma1, BCLKCTR0, 22, NULL, NULL)
+DEFINE_BCLOCK(mscl, BCLKCTR0, 25, NULL, NULL)
+DEFINE_BCLOCK(bdma, BCLKCTR1, 0, NULL, NULL)
+DEFINE_BCLOCK(adma0, BCLKCTR1, 1, NULL, NULL)
+DEFINE_BCLOCK(scfg, BCLKCTR1, 3, NULL, NULL)
+DEFINE_BCLOCK(cid, BCLKCTR1, 4, NULL, NULL)
+DEFINE_BCLOCK(dai1, BCLKCTR1, 7, NULL, NULL)
+DEFINE_BCLOCK(adma1, BCLKCTR1, 8, NULL, NULL)
+DEFINE_BCLOCK(gps, BCLKCTR1, 12, NULL, NULL)
+DEFINE_BCLOCK(gdma2, BCLKCTR1, 17, NULL, NULL)
+DEFINE_BCLOCK(gdma3, BCLKCTR1, 18, NULL, NULL)
+DEFINE_BCLOCK(ddrc, BCLKCTR1, 19, NULL, NULL)
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK(NULL, "bus", bus)
+	_REGISTER_CLOCK(NULL, "cpu", cpu)
+	_REGISTER_CLOCK(NULL, "tct", tct)
+	_REGISTER_CLOCK(NULL, "tcx", tcx)
+	_REGISTER_CLOCK(NULL, "tcz", tcz)
+	_REGISTER_CLOCK(NULL, "ref", ref)
+	_REGISTER_CLOCK(NULL, "dai0", dai0)
+	_REGISTER_CLOCK(NULL, "pic", pic)
+	_REGISTER_CLOCK(NULL, "tc", tc)
+	_REGISTER_CLOCK(NULL, "gpio", gpio)
+	_REGISTER_CLOCK(NULL, "usbd", usbd)
+	_REGISTER_CLOCK("tcc-uart.0", NULL, uart0)
+	_REGISTER_CLOCK("tcc-uart.2", NULL, uart2)
+	_REGISTER_CLOCK("tcc-i2c", NULL, i2c)
+	_REGISTER_CLOCK("tcc-uart.3", NULL, uart3)
+	_REGISTER_CLOCK(NULL, "ecc", ecc)
+	_REGISTER_CLOCK(NULL, "adc", adc)
+	_REGISTER_CLOCK("tcc-usbh.0", "usb", usbh0)
+	_REGISTER_CLOCK(NULL, "gdma0", gdma0)
+	_REGISTER_CLOCK(NULL, "lcd", lcd)
+	_REGISTER_CLOCK(NULL, "rtc", rtc)
+	_REGISTER_CLOCK(NULL, "nfc", nfc)
+	_REGISTER_CLOCK("tcc-mmc.0", NULL, sd0)
+	_REGISTER_CLOCK(NULL, "g2d", g2d)
+	_REGISTER_CLOCK(NULL, "gdma1", gdma1)
+	_REGISTER_CLOCK("tcc-uart.1", NULL, uart1)
+	_REGISTER_CLOCK("tcc-spi.0", NULL, spi0)
+	_REGISTER_CLOCK(NULL, "mscl", mscl)
+	_REGISTER_CLOCK("tcc-spi.1", NULL, spi1)
+	_REGISTER_CLOCK(NULL, "bdma", bdma)
+	_REGISTER_CLOCK(NULL, "adma0", adma0)
+	_REGISTER_CLOCK(NULL, "spdif", spdif)
+	_REGISTER_CLOCK(NULL, "scfg", scfg)
+	_REGISTER_CLOCK(NULL, "cid", cid)
+	_REGISTER_CLOCK("tcc-mmc.1", NULL, sd1)
+	_REGISTER_CLOCK("tcc-uart.4", NULL, uart4)
+	_REGISTER_CLOCK(NULL, "dai1", dai1)
+	_REGISTER_CLOCK(NULL, "adma1", adma1)
+	_REGISTER_CLOCK(NULL, "c3dec", c3dec)
+	_REGISTER_CLOCK("tcc-can.0", NULL, can0)
+	_REGISTER_CLOCK("tcc-can.1", NULL, can1)
+	_REGISTER_CLOCK(NULL, "gps", gps)
+	_REGISTER_CLOCK("tcc-gsb.0", NULL, gsb0)
+	_REGISTER_CLOCK("tcc-gsb.1", NULL, gsb1)
+	_REGISTER_CLOCK("tcc-gsb.2", NULL, gsb2)
+	_REGISTER_CLOCK("tcc-gsb.3", NULL, gsb3)
+	_REGISTER_CLOCK(NULL, "gdma2", gdma2)
+	_REGISTER_CLOCK(NULL, "gdma3", gdma3)
+	_REGISTER_CLOCK(NULL, "ddrc", ddrc)
+	_REGISTER_CLOCK("tcc-usbh.1", "usb", usbh1)
+};
+
+static struct clk *root_clk_by_index(enum root_clks src)
+{
+	switch (src) {
+	case CLK_SRC_PLL0: return &pll0;
+	case CLK_SRC_PLL1: return &pll1;
+	case CLK_SRC_PLL2: return &pll2;
+	case CLK_SRC_PLL0DIV: return &pll0div;
+	case CLK_SRC_PLL1DIV: return &pll1div;
+	case CLK_SRC_PLL2DIV: return &pll2div;
+	case CLK_SRC_XI: return &xi;
+	case CLK_SRC_XTI: return &xti;
+	case CLK_SRC_XIDIV: return &xidiv;
+	case CLK_SRC_XTIDIV: return &xtidiv;
+	default: return NULL;
+	}
+}
+
+static void find_aclk_parent(struct clk *clk)
+{
+	unsigned int src;
+	struct clk *clock;
+
+	if (!clk->aclkreg)
+		return;
+
+	src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
+	src &= CLK_SRC_MASK;
+
+	clock = root_clk_by_index(src);
+	if (!clock)
+		return;
+
+	clk->parent = clock;
+	clk->set_parent = aclk_set_parent;
+}
+
+void __init tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq)
+{
+	int i;
+
+	xi_rate = xi_freq;
+	xti_rate = xti_freq;
+
+	/* fixup parents and add the clock */
+	for (i = 0; i < ARRAY_SIZE(lookups); i++) {
+		find_aclk_parent(lookups[i].clk);
+		clkdev_add(&lookups[i]);
+	}
+	tcc8k_timer_init(&tcz, (void __iomem *)TIMER_BASE, INT_TC32);
+}
diff --git a/arch/arm/mach-tcc8k/common.h b/arch/arm/mach-tcc8k/common.h
new file mode 100644
index 000000000000..705690add395
--- /dev/null
+++ b/arch/arm/mach-tcc8k/common.h
@@ -0,0 +1,15 @@
+#ifndef MACH_TCC8K_COMMON_H
+#define MACH_TCC8K_COMMON_H
+
+#include <linux/platform_device.h>
+
+extern struct platform_device tcc_nand_device;
+
+struct clk;
+
+extern void tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq);
+extern void tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq);
+extern void tcc8k_init_irq(void);
+extern void tcc8k_map_common_io(void);
+
+#endif
diff --git a/arch/arm/mach-tcc8k/devices.c b/arch/arm/mach-tcc8k/devices.c
new file mode 100644
index 000000000000..6722ad7c2836
--- /dev/null
+++ b/arch/arm/mach-tcc8k/devices.c
@@ -0,0 +1,239 @@
+/*
+ * linux/arch/arm/mach-tcc8k/devices.c
+ *
+ * Copyright (C) Telechips, Inc.
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of GPL v2.
+ *
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/tcc8k-regs.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+static u64 tcc8k_dmamask = DMA_BIT_MASK(32);
+
+#ifdef CONFIG_MTD_NAND_TCC
+/* NAND controller */
+static struct resource tcc_nand_resources[] = {
+	{
+		.start	= (resource_size_t)NFC_BASE,
+		.end	= (resource_size_t)NFC_BASE + 0x7f,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= INT_NFC,
+		.end	= INT_NFC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device tcc_nand_device = {
+	.name = "tcc_nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(tcc_nand_resources),
+	.resource = tcc_nand_resources,
+};
+#endif
+
+#ifdef CONFIG_MMC_TCC8K
+/* MMC controller */
+static struct resource tcc8k_mmc0_resource[] = {
+	{
+		.start = INT_SD0,
+		.end   = INT_SD0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource tcc8k_mmc1_resource[] = {
+	{
+		.start = INT_SD1,
+		.end   = INT_SD1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device tcc8k_mmc0_device = {
+	.name		= "tcc-mmc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(tcc8k_mmc0_resource),
+	.resource	= tcc8k_mmc0_resource,
+	.dev		= {
+		.dma_mask		= &tcc8k_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+struct platform_device tcc8k_mmc1_device = {
+	.name		= "tcc-mmc",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(tcc8k_mmc1_resource),
+	.resource	= tcc8k_mmc1_resource,
+	.dev		= {
+		.dma_mask		= &tcc8k_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+static inline void tcc8k_init_mmc(void)
+{
+	u32 reg = __raw_readl(GPIOPS_BASE + GPIOPS_FS1_OFFS);
+
+	reg |= GPIOPS_FS1_SDH0_BITS | GPIOPS_FS1_SDH1_BITS;
+	__raw_writel(reg, GPIOPS_BASE + GPIOPS_FS1_OFFS);
+
+	platform_device_register(&tcc8k_mmc0_device);
+	platform_device_register(&tcc8k_mmc1_device);
+}
+#else
+static inline void tcc8k_init_mmc(void) { }
+#endif
+
+#ifdef CONFIG_USB_OHCI_HCD
+static int tcc8k_ohci_init(struct device *dev)
+{
+	u32 reg;
+
+	/* Use GPIO PK19 as VBUS control output */
+	reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS0_OFFS);
+	reg &= ~(1 << 19);
+	__raw_writel(reg, GPIOPK_BASE + GPIOPK_FS0_OFFS);
+	reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS1_OFFS);
+	reg &= ~(1 << 19);
+	__raw_writel(reg, GPIOPK_BASE + GPIOPK_FS1_OFFS);
+
+	reg = __raw_readl(GPIOPK_BASE + GPIOPK_DOE_OFFS);
+	reg |= (1 << 19);
+	__raw_writel(reg, GPIOPK_BASE + GPIOPK_DOE_OFFS);
+	/* Turn on VBUS */
+	reg = __raw_readl(GPIOPK_BASE + GPIOPK_DAT_OFFS);
+	reg |= (1 << 19);
+	__raw_writel(reg, GPIOPK_BASE + GPIOPK_DAT_OFFS);
+
+	return 0;
+}
+
+static struct resource tcc8k_ohci0_resources[] = {
+	[0] = {
+		.start = (resource_size_t)USBH0_BASE,
+		.end   = (resource_size_t)USBH0_BASE + 0x5c,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = INT_USBH0,
+		.end   = INT_USBH0,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource tcc8k_ohci1_resources[] = {
+	[0] = {
+		.start = (resource_size_t)USBH1_BASE,
+		.end   = (resource_size_t)USBH1_BASE + 0x5c,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = INT_USBH1,
+		.end   = INT_USBH1,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct tccohci_platform_data tcc8k_ohci0_platform_data = {
+	.controller	= 0,
+	.port_mode	= PMM_PERPORT_MODE,
+	.init		= tcc8k_ohci_init,
+};
+
+static struct tccohci_platform_data tcc8k_ohci1_platform_data = {
+	.controller	= 1,
+	.port_mode	= PMM_PERPORT_MODE,
+	.init		= tcc8k_ohci_init,
+};
+
+static struct platform_device ohci0_device = {
+	.name = "tcc-ohci",
+	.id = 0,
+	.dev = {
+		.dma_mask = &tcc8k_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &tcc8k_ohci0_platform_data,
+	},
+	.num_resources  = ARRAY_SIZE(tcc8k_ohci0_resources),
+	.resource       = tcc8k_ohci0_resources,
+};
+
+static struct platform_device ohci1_device = {
+	.name = "tcc-ohci",
+	.id = 1,
+	.dev = {
+		.dma_mask = &tcc8k_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &tcc8k_ohci1_platform_data,
+	},
+	.num_resources  = ARRAY_SIZE(tcc8k_ohci1_resources),
+	.resource       = tcc8k_ohci1_resources,
+};
+
+static void __init tcc8k_init_usbhost(void)
+{
+	platform_device_register(&ohci0_device);
+	platform_device_register(&ohci1_device);
+}
+#else
+static void __init tcc8k_init_usbhost(void) { }
+#endif
+
+/* USB device controller*/
+#ifdef CONFIG_USB_GADGET_TCC8K
+static struct resource udc_resources[] = {
+	[0] = {
+		.start = INT_USBD,
+		.end   = INT_USBD,
+		.flags = IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start = INT_UDMA,
+		.end   = INT_UDMA,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tcc8k_udc_device = {
+	.name = "tcc-udc",
+	.id = 0,
+	.resource = udc_resources,
+	.num_resources = ARRAY_SIZE(udc_resources),
+	.dev = {
+		 .dma_mask = &tcc8k_dmamask,
+		 .coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static void __init tcc8k_init_usb_gadget(void)
+{
+	platform_device_register(&tcc8k_udc_device);
+}
+#else
+static void __init tcc8k_init_usb_gadget(void) { }
+#endif	/* CONFIG_USB_GADGET_TCC83X */
+
+static int __init tcc8k_init_devices(void)
+{
+	tcc8k_init_mmc();
+	tcc8k_init_usbhost();
+	tcc8k_init_usb_gadget();
+	return 0;
+}
+
+arch_initcall(tcc8k_init_devices);
diff --git a/arch/arm/mach-tcc8k/io.c b/arch/arm/mach-tcc8k/io.c
new file mode 100644
index 000000000000..9b39d7fa658f
--- /dev/null
+++ b/arch/arm/mach-tcc8k/io.c
@@ -0,0 +1,62 @@
+/*
+ * linux/arch/arm/mach-tcc8k/io.c
+ *
+ * (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * derived from TCC83xx io.c
+ * Copyright (C) Telechips, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/tcc8k-regs.h>
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc tcc8k_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long)CS1_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CS1_BASE),
+		.length		= CS1_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)AHB_PERI_BASE_VIRT,
+		.pfn		= __phys_to_pfn(AHB_PERI_BASE),
+		.length		= AHB_PERI_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)APB0_PERI_BASE_VIRT,
+		.pfn		= __phys_to_pfn(APB0_PERI_BASE),
+		.length		= APB0_PERI_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)APB1_PERI_BASE_VIRT,
+		.pfn		= __phys_to_pfn(APB1_PERI_BASE),
+		.length		= APB1_PERI_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)EXT_MEM_CTRL_BASE_VIRT,
+		.pfn		= __phys_to_pfn(EXT_MEM_CTRL_BASE),
+		.length		= EXT_MEM_CTRL_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/*
+ * Maps common IO regions for tcc8k.
+ *
+ */
+void __init tcc8k_map_common_io(void)
+{
+	iotable_init(tcc8k_io_desc, ARRAY_SIZE(tcc8k_io_desc));
+}
diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c
new file mode 100644
index 000000000000..34575c4963f0
--- /dev/null
+++ b/arch/arm/mach-tcc8k/irq.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) Telechips, Inc.
+ * Copyright (C) 2009-2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GNU GPL version 2.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/tcc8k-regs.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+/* Disable IRQ */
+static void tcc8000_mask_ack_irq0(unsigned int irq)
+{
+	PIC0_IEN &= ~(1 << irq);
+	PIC0_CREQ |=  (1 << irq);
+}
+
+static void tcc8000_mask_ack_irq1(unsigned int irq)
+{
+	PIC1_IEN &= ~(1 << (irq - 32));
+	PIC1_CREQ |= (1 << (irq - 32));
+}
+
+static void tcc8000_mask_irq0(unsigned int irq)
+{
+	PIC0_IEN &= ~(1 << irq);
+}
+
+static void tcc8000_mask_irq1(unsigned int irq)
+{
+	PIC1_IEN &= ~(1 << (irq - 32));
+}
+
+static void tcc8000_ack_irq0(unsigned int irq)
+{
+	PIC0_CREQ |=  (1 << irq);
+}
+
+static void tcc8000_ack_irq1(unsigned int irq)
+{
+	PIC1_CREQ |= (1 << (irq - 32));
+}
+
+/* Enable IRQ */
+static void tcc8000_unmask_irq0(unsigned int irq)
+{
+	PIC0_IEN |= (1 << irq);
+	PIC0_INTOEN |= (1 << irq);
+}
+
+static void tcc8000_unmask_irq1(unsigned int irq)
+{
+	PIC1_IEN |= (1 << (irq - 32));
+	PIC1_INTOEN |= (1 << (irq - 32));
+}
+
+static struct irq_chip tcc8000_irq_chip0 = {
+	.name		= "tcc_irq0",
+	.mask		= tcc8000_mask_irq0,
+	.ack		= tcc8000_ack_irq0,
+	.mask_ack	= tcc8000_mask_ack_irq0,
+	.unmask		= tcc8000_unmask_irq0,
+};
+
+static struct irq_chip tcc8000_irq_chip1 = {
+	.name		= "tcc_irq1",
+	.mask		= tcc8000_mask_irq1,
+	.ack		= tcc8000_ack_irq1,
+	.mask_ack	= tcc8000_mask_ack_irq1,
+	.unmask		= tcc8000_unmask_irq1,
+};
+
+void __init tcc8k_init_irq(void)
+{
+	int irqno;
+
+	/* Mask and clear all interrupts */
+	PIC0_IEN = 0x00000000;
+	PIC0_CREQ = 0xffffffff;
+	PIC1_IEN = 0x00000000;
+	PIC1_CREQ = 0xffffffff;
+
+	PIC0_MEN0 = 0x00000003;
+	PIC1_MEN1 = 0x00000003;
+	PIC1_MEN = 0x00000003;
+
+	/* let all IRQs be level triggered */
+	PIC0_TMODE = 0xffffffff;
+	PIC1_TMODE = 0xffffffff;
+	/* all IRQs are IRQs (not FIQs) */
+	PIC0_IRQSEL = 0xffffffff;
+	PIC1_IRQSEL = 0xffffffff;
+
+	for (irqno = 0; irqno < NR_IRQS; irqno++) {
+		if (irqno < 32)
+			set_irq_chip(irqno, &tcc8000_irq_chip0);
+		else
+			set_irq_chip(irqno, &tcc8000_irq_chip1);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
new file mode 100644
index 000000000000..78d06008841d
--- /dev/null
+++ b/arch/arm/mach-tcc8k/time.c
@@ -0,0 +1,149 @@
+/*
+ * TCC8000 system timer setup
+ *
+ * (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL version 2.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+
+#include <asm/mach/time.h>
+
+#include <mach/tcc8k-regs.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+static void __iomem *timer_base;
+
+static cycle_t tcc_get_cycles(struct clocksource *cs)
+{
+	return __raw_readl(timer_base + TC32MCNT_OFFS);
+}
+
+static struct clocksource clocksource_tcc = {
+	.name		= "tcc_tc32",
+	.rating		= 200,
+	.read		= tcc_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 28,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int tcc_set_next_event(unsigned long evt,
+			      struct clock_event_device *unused)
+{
+	unsigned long reg = __raw_readl(timer_base + TC32MCNT_OFFS);
+
+	__raw_writel(reg + evt, timer_base + TC32CMP0_OFFS);
+	return 0;
+}
+
+static void tcc_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	unsigned long tc32irq;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
+		tc32irq |= TC32IRQ_IRQEN0;
+		__raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
+		tc32irq &= ~TC32IRQ_IRQEN0;
+		__raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
+		break;
+	case CLOCK_EVT_MODE_PERIODIC:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static irqreturn_t tcc8k_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	/* Acknowledge TC32 interrupt by reading TC32IRQ */
+	__raw_readl(timer_base + TC32IRQ_OFFS);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct clock_event_device clockevent_tcc = {
+	.name		= "tcc_timer1",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_mode	= tcc_set_mode,
+	.set_next_event	= tcc_set_next_event,
+	.rating		= 200,
+};
+
+static struct irqaction tcc8k_timer_irq = {
+	.name		= "TC32_timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= tcc8k_timer_interrupt,
+	.dev_id		= &clockevent_tcc,
+};
+
+static int __init tcc_clockevent_init(struct clk *clock)
+{
+	unsigned int c = clk_get_rate(clock);
+
+	clocksource_tcc.mult = clocksource_hz2mult(c,
+					clocksource_tcc.shift);
+	clocksource_register(&clocksource_tcc);
+
+	clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
+					clockevent_tcc.shift);
+	clockevent_tcc.max_delta_ns =
+			clockevent_delta2ns(0xfffffffe, &clockevent_tcc);
+	clockevent_tcc.min_delta_ns =
+			clockevent_delta2ns(0xff, &clockevent_tcc);
+
+	clockevent_tcc.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&clockevent_tcc);
+
+	return 0;
+}
+
+void __init tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq)
+{
+	u32 reg;
+
+	timer_base = base;
+	tcc8k_timer_irq.irq = irq;
+
+	/* Enable clocks */
+	clk_enable(clock);
+
+	/* Initialize 32-bit timer */
+	reg = __raw_readl(timer_base + TC32EN_OFFS);
+	reg &= ~TC32EN_ENABLE; /* Disable timer */
+	__raw_writel(reg, timer_base + TC32EN_OFFS);
+	/* Free running timer, counting from 0 to 0xffffffff */
+	__raw_writel(0, timer_base + TC32EN_OFFS);
+	__raw_writel(0, timer_base + TC32LDV_OFFS);
+	reg = __raw_readl(timer_base + TC32IRQ_OFFS);
+	reg |= TC32IRQ_IRQEN0; /* irq at match with CMP0 */
+	__raw_writel(reg, timer_base + TC32IRQ_OFFS);
+
+	__raw_writel(TC32EN_ENABLE, timer_base + TC32EN_OFFS);
+
+	tcc_clockevent_init(clock);
+	setup_irq(irq, &tcc8k_timer_irq);
+}
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
new file mode 100644
index 000000000000..acd9552f8ada
--- /dev/null
+++ b/arch/arm/mach-tegra/Kconfig
@@ -0,0 +1,61 @@
+if ARCH_TEGRA
+
+comment "NVIDIA Tegra options"
+
+choice
+	prompt "Select Tegra processor family for target system"
+
+config ARCH_TEGRA_2x_SOC
+	bool "Tegra 2 family"
+	select CPU_V7
+	select ARM_GIC
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
+	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
+
+endchoice
+
+config TEGRA_PCI
+	bool "PCI Express support"
+	select PCI
+
+comment "Tegra board type"
+
+config MACH_HARMONY
+       bool "Harmony board"
+       help
+         Support for nVidia Harmony development platform
+
+choice
+        prompt "Low-level debug console UART"
+        default TEGRA_DEBUG_UART_NONE
+
+config TEGRA_DEBUG_UART_NONE
+        bool "None"
+
+config TEGRA_DEBUG_UARTA
+        bool "UART-A"
+
+config TEGRA_DEBUG_UARTB
+        bool "UART-B"
+
+config TEGRA_DEBUG_UARTC
+        bool "UART-C"
+
+config TEGRA_DEBUG_UARTD
+        bool "UART-D"
+
+config TEGRA_DEBUG_UARTE
+        bool "UART-E"
+
+endchoice
+
+config TEGRA_SYSTEM_DMA
+	bool "Enable system DMA driver for NVIDIA Tegra SoCs"
+	default y
+	help
+	  Adds system DMA functionality for NVIDIA Tegra SoCs, used by
+	  several Tegra device drivers
+
+endif
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
new file mode 100644
index 000000000000..cdbc68e4c0ca
--- /dev/null
+++ b/arch/arm/mach-tegra/Makefile
@@ -0,0 +1,21 @@
+obj-y                                   += common.o
+obj-y                                   += io.o
+obj-y                                   += irq.o legacy_irq.o
+obj-y                                   += clock.o
+obj-y                                   += timer.o
+obj-y                                   += gpio.o
+obj-y                                   += pinmux.o
+obj-y					+= fuse.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += clock.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra2_clocks.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra2_dvfs.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pinmux-t2-tables.o
+obj-$(CONFIG_SMP)                       += platsmp.o localtimer.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
+obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o
+obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
+obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
+
+obj-${CONFIG_MACH_HARMONY}              += board-harmony.o
+obj-${CONFIG_MACH_HARMONY}              += board-harmony-pinmux.o
+obj-${CONFIG_MACH_HARMONY}              += board-harmony-pcie.o
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
new file mode 100644
index 000000000000..db52d61a7386
--- /dev/null
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00008000
+params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00000100
+initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00800000
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
new file mode 100644
index 000000000000..f7e7d4514b6a
--- /dev/null
+++ b/arch/arm/mach-tegra/board-harmony-pcie.c
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-tegra/board-harmony-pcie.c
+ *
+ * Copyright (C) 2010 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+
+#include <asm/mach-types.h>
+
+#include <mach/pinmux.h>
+#include "board.h"
+
+#ifdef CONFIG_TEGRA_PCI
+
+static int __init harmony_pcie_init(void)
+{
+	int err;
+
+	if (!machine_is_harmony())
+		return 0;
+
+	tegra_pinmux_set_tristate(TEGRA_PINGROUP_GPV, TEGRA_TRI_NORMAL);
+	tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_NORMAL);
+	tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_NORMAL);
+
+	err = tegra_pcie_init(true, true);
+	if (err)
+		goto err_pcie;
+
+	return 0;
+
+err_pcie:
+	tegra_pinmux_set_tristate(TEGRA_PINGROUP_GPV, TEGRA_TRI_TRISTATE);
+	tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXA, TEGRA_TRI_TRISTATE);
+	tegra_pinmux_set_tristate(TEGRA_PINGROUP_SLXK, TEGRA_TRI_TRISTATE);
+
+	return err;
+}
+
+subsys_initcall(harmony_pcie_init);
+
+#endif
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
new file mode 100644
index 000000000000..50b15d500cac
--- /dev/null
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -0,0 +1,144 @@
+/*
+ * arch/arm/mach-tegra/board-harmony-pinmux.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <mach/pinmux.h>
+
+#include "board-harmony.h"
+
+static struct tegra_pingroup_config harmony_pinmux[] = {
+	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_IDE,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_ATB,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_ATC,   TEGRA_MUX_NAND,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_ATD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_ATE,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_OSC,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4,     TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_I2C2,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DTB,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DTC,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DTD,   TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DTE,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DTF,   TEGRA_MUX_I2C3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_GMA,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GMB,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GMC,   TEGRA_MUX_UARTD,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GMD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GME,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GPU,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_GPU7,  TEGRA_MUX_RTCK,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_I2CP,  TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_IRRX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_IRTX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_KBCA,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_KBCB,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_KBCC,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_KBCD,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_KBCE,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_KBCF,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LCSN,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LD0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD10,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD11,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD12,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD13,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD14,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD15,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD16,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD17,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD2,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD3,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD4,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD5,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD6,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD7,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD8,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD9,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LDC,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LDI,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LHP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LHP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LHP2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LHS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LM0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LM1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LPP,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LPW0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LPW1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LPW2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LSC0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LSC1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LSCK,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LSDA,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LSDI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LSPI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LVP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LVP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LVS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_OWC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_PMC,   TEGRA_MUX_PWR_ON,        TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PTA,   TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_RM,    TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_SDB,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SDC,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_SDD,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SLXC,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SLXD,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPDI,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIG,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIH,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UAA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UAB,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UAD,   TEGRA_MUX_IRDA,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UCA,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UCB,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UDA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_CK32,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_DDRC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PMCA,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PMCB,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PMCC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PMCD,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PMCE,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_XM2C,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+};
+
+void harmony_pinmux_init(void)
+{
+	tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
+}
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
new file mode 100644
index 000000000000..b9dbdb1289d0
--- /dev/null
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -0,0 +1,123 @@
+/*
+ * arch/arm/mach-tegra/board-harmony.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/pda_power.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/setup.h>
+
+#include <mach/iomap.h>
+#include <mach/irqs.h>
+
+#include "board.h"
+#include "board-harmony.h"
+#include "clock.h"
+
+/* NVidia bootloader tags */
+#define ATAG_NVIDIA		0x41000801
+
+#define ATAG_NVIDIA_RM			0x1
+#define ATAG_NVIDIA_DISPLAY		0x2
+#define ATAG_NVIDIA_FRAMEBUFFER		0x3
+#define ATAG_NVIDIA_CHIPSHMOO		0x4
+#define ATAG_NVIDIA_CHIPSHMOOPHYS	0x5
+#define ATAG_NVIDIA_PRESERVED_MEM_0	0x10000
+#define ATAG_NVIDIA_PRESERVED_MEM_N	2
+#define ATAG_NVIDIA_FORCE_32		0x7fffffff
+
+struct tag_tegra {
+	__u32 bootarg_key;
+	__u32 bootarg_len;
+	char bootarg[1];
+};
+
+static int __init parse_tag_nvidia(const struct tag *tag)
+{
+
+	return 0;
+}
+__tagtable(ATAG_NVIDIA, parse_tag_nvidia);
+
+static struct plat_serial8250_port debug_uart_platform_data[] = {
+	{
+		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
+		.mapbase	= TEGRA_UARTD_BASE,
+		.irq		= INT_UARTD,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 216000000,
+	}, {
+		.flags		= 0
+	}
+};
+
+static struct platform_device debug_uart = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = debug_uart_platform_data,
+	},
+};
+
+static struct platform_device *harmony_devices[] __initdata = {
+	&debug_uart,
+};
+
+static void __init tegra_harmony_fixup(struct machine_desc *desc,
+	struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 2;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].size = 448 * SZ_1M;
+	mi->bank[1].start = SZ_512M;
+	mi->bank[1].size = SZ_512M;
+}
+
+static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
+	/* name		parent		rate		enabled */
+	{ "uartd",	"pll_p",	216000000,	true },
+	{ NULL,		NULL,		0,		0},
+};
+
+static void __init tegra_harmony_init(void)
+{
+	tegra_common_init();
+
+	tegra_clk_init_from_table(harmony_clk_init_table);
+
+	harmony_pinmux_init();
+
+	platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices));
+}
+
+MACHINE_START(HARMONY, "harmony")
+	.boot_params  = 0x00000100,
+	.fixup		= tegra_harmony_fixup,
+	.init_irq       = tegra_init_irq,
+	.init_machine   = tegra_harmony_init,
+	.map_io         = tegra_map_common_io,
+	.timer          = &tegra_timer,
+MACHINE_END
diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h
new file mode 100644
index 000000000000..09ca7755dd55
--- /dev/null
+++ b/arch/arm/mach-tegra/board-harmony.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-tegra/board-harmony.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _MACH_TEGRA_BOARD_HARMONY_H
+#define _MACH_TEGRA_BOARD_HARMONY_H
+
+void harmony_pinmux_init(void);
+
+#endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
new file mode 100644
index 000000000000..0de565ca37c5
--- /dev/null
+++ b/arch/arm/mach-tegra/board.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-tegra/board.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_BOARD_H
+#define __MACH_TEGRA_BOARD_H
+
+#include <linux/types.h>
+
+void __init tegra_common_init(void);
+void __init tegra_map_common_io(void);
+void __init tegra_init_irq(void);
+void __init tegra_init_clock(void);
+int __init tegra_pcie_init(bool init_port0, bool init_port1);
+
+extern struct sys_timer tegra_timer;
+#endif
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
new file mode 100644
index 000000000000..ae19f95585be
--- /dev/null
+++ b/arch/arm/mach-tegra/clock.c
@@ -0,0 +1,709 @@
+/*
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/seq_file.h>
+#include <linux/regulator/consumer.h>
+#include <asm/clkdev.h>
+
+#include "clock.h"
+#include "board.h"
+#include "fuse.h"
+
+static LIST_HEAD(clocks);
+
+static DEFINE_SPINLOCK(clock_lock);
+static DEFINE_MUTEX(dvfs_lock);
+
+static int clk_is_dvfs(struct clk *c)
+{
+	return (c->dvfs != NULL);
+};
+
+static int dvfs_set_rate(struct dvfs *d, unsigned long rate)
+{
+	struct dvfs_table *t;
+
+	if (d->table == NULL)
+		return -ENODEV;
+
+	for (t = d->table; t->rate != 0; t++) {
+		if (rate <= t->rate) {
+			if (!d->reg)
+				return 0;
+
+			return regulator_set_voltage(d->reg,
+				t->millivolts * 1000,
+				d->max_millivolts * 1000);
+		}
+	}
+
+	return -EINVAL;
+}
+
+static void dvfs_init(struct clk *c)
+{
+	int process_id;
+	int i;
+	struct dvfs_table *table;
+
+	process_id = c->dvfs->cpu ? tegra_core_process_id() :
+		tegra_cpu_process_id();
+
+	for (i = 0; i < c->dvfs->process_id_table_length; i++)
+		if (process_id == c->dvfs->process_id_table[i].process_id)
+			c->dvfs->table = c->dvfs->process_id_table[i].table;
+
+	if (c->dvfs->table == NULL) {
+		pr_err("Failed to find dvfs table for clock %s process %d\n",
+			c->name, process_id);
+		return;
+	}
+
+	c->dvfs->max_millivolts = 0;
+	for (table = c->dvfs->table; table->rate != 0; table++)
+		if (c->dvfs->max_millivolts < table->millivolts)
+			c->dvfs->max_millivolts = table->millivolts;
+
+	c->dvfs->reg = regulator_get(NULL, c->dvfs->reg_id);
+
+	if (IS_ERR(c->dvfs->reg)) {
+		pr_err("Failed to get regulator %s for clock %s\n",
+			c->dvfs->reg_id, c->name);
+		c->dvfs->reg = NULL;
+		return;
+	}
+
+	if (c->refcnt > 0)
+		dvfs_set_rate(c->dvfs, c->rate);
+}
+
+struct clk *tegra_get_clock_by_name(const char *name)
+{
+	struct clk *c;
+	struct clk *ret = NULL;
+	unsigned long flags;
+	spin_lock_irqsave(&clock_lock, flags);
+	list_for_each_entry(c, &clocks, node) {
+		if (strcmp(c->name, name) == 0) {
+			ret = c;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&clock_lock, flags);
+	return ret;
+}
+
+static void clk_recalculate_rate(struct clk *c)
+{
+	u64 rate;
+
+	if (!c->parent)
+		return;
+
+	rate = c->parent->rate;
+
+	if (c->mul != 0 && c->div != 0) {
+		rate = rate * c->mul;
+		do_div(rate, c->div);
+	}
+
+	if (rate > c->max_rate)
+		pr_warn("clocks: Set clock %s to rate %llu, max is %lu\n",
+			c->name, rate, c->max_rate);
+
+	c->rate = rate;
+}
+
+int clk_reparent(struct clk *c, struct clk *parent)
+{
+	pr_debug("%s: %s\n", __func__, c->name);
+	c->parent = parent;
+	list_del(&c->sibling);
+	list_add_tail(&c->sibling, &parent->children);
+	return 0;
+}
+
+static void propagate_rate(struct clk *c)
+{
+	struct clk *clkp;
+	pr_debug("%s: %s\n", __func__, c->name);
+	list_for_each_entry(clkp, &c->children, sibling) {
+		pr_debug("   %s\n", clkp->name);
+		clk_recalculate_rate(clkp);
+		propagate_rate(clkp);
+	}
+}
+
+void clk_init(struct clk *c)
+{
+	unsigned long flags;
+
+	pr_debug("%s: %s\n", __func__, c->name);
+
+	spin_lock_irqsave(&clock_lock, flags);
+
+	INIT_LIST_HEAD(&c->children);
+	INIT_LIST_HEAD(&c->sibling);
+
+	if (c->ops && c->ops->init)
+		c->ops->init(c);
+
+	clk_recalculate_rate(c);
+
+	list_add(&c->node, &clocks);
+
+	if (c->parent)
+		list_add_tail(&c->sibling, &c->parent->children);
+
+	spin_unlock_irqrestore(&clock_lock, flags);
+}
+
+int clk_enable_locked(struct clk *c)
+{
+	int ret;
+	pr_debug("%s: %s\n", __func__, c->name);
+	if (c->refcnt == 0) {
+		if (c->parent) {
+			ret = clk_enable_locked(c->parent);
+			if (ret)
+				return ret;
+		}
+
+		if (c->ops && c->ops->enable) {
+			ret = c->ops->enable(c);
+			if (ret) {
+				if (c->parent)
+					clk_disable_locked(c->parent);
+				return ret;
+			}
+			c->state = ON;
+#ifdef CONFIG_DEBUG_FS
+			c->set = 1;
+#endif
+		}
+	}
+	c->refcnt++;
+
+	return 0;
+}
+
+int clk_enable_cansleep(struct clk *c)
+{
+	int ret;
+	unsigned long flags;
+
+	mutex_lock(&dvfs_lock);
+
+	if (clk_is_dvfs(c) && c->refcnt > 0)
+		dvfs_set_rate(c->dvfs, c->rate);
+
+	spin_lock_irqsave(&clock_lock, flags);
+	ret = clk_enable_locked(c);
+	spin_unlock_irqrestore(&clock_lock, flags);
+
+	mutex_unlock(&dvfs_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable_cansleep);
+
+int clk_enable(struct clk *c)
+{
+	int ret;
+	unsigned long flags;
+
+	if (clk_is_dvfs(c))
+		BUG();
+
+	spin_lock_irqsave(&clock_lock, flags);
+	ret = clk_enable_locked(c);
+	spin_unlock_irqrestore(&clock_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable_locked(struct clk *c)
+{
+	pr_debug("%s: %s\n", __func__, c->name);
+	if (c->refcnt == 0) {
+		WARN(1, "Attempting to disable clock %s with refcnt 0", c->name);
+		return;
+	}
+	if (c->refcnt == 1) {
+		if (c->ops && c->ops->disable)
+			c->ops->disable(c);
+
+		if (c->parent)
+			clk_disable_locked(c->parent);
+
+		c->state = OFF;
+	}
+	c->refcnt--;
+}
+
+void clk_disable_cansleep(struct clk *c)
+{
+	unsigned long flags;
+
+	mutex_lock(&dvfs_lock);
+
+	spin_lock_irqsave(&clock_lock, flags);
+	clk_disable_locked(c);
+	spin_unlock_irqrestore(&clock_lock, flags);
+
+	if (clk_is_dvfs(c) && c->refcnt == 0)
+		dvfs_set_rate(c->dvfs, c->rate);
+
+	mutex_unlock(&dvfs_lock);
+}
+EXPORT_SYMBOL(clk_disable_cansleep);
+
+void clk_disable(struct clk *c)
+{
+	unsigned long flags;
+
+	if (clk_is_dvfs(c))
+		BUG();
+
+	spin_lock_irqsave(&clock_lock, flags);
+	clk_disable_locked(c);
+	spin_unlock_irqrestore(&clock_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_set_parent_locked(struct clk *c, struct clk *parent)
+{
+	int ret;
+
+	pr_debug("%s: %s\n", __func__, c->name);
+
+	if (!c->ops || !c->ops->set_parent)
+		return -ENOSYS;
+
+	ret = c->ops->set_parent(c, parent);
+
+	if (ret)
+		return ret;
+
+	clk_recalculate_rate(c);
+
+	propagate_rate(c);
+
+	return 0;
+}
+
+int clk_set_parent(struct clk *c, struct clk *parent)
+{
+	int ret;
+	unsigned long flags;
+	spin_lock_irqsave(&clock_lock, flags);
+	ret = clk_set_parent_locked(c, parent);
+	spin_unlock_irqrestore(&clock_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *c)
+{
+	return c->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_rate_locked(struct clk *c, unsigned long rate)
+{
+	int ret;
+
+	if (rate > c->max_rate)
+		rate = c->max_rate;
+
+	if (!c->ops || !c->ops->set_rate)
+		return -ENOSYS;
+
+	ret = c->ops->set_rate(c, rate);
+
+	if (ret)
+		return ret;
+
+	clk_recalculate_rate(c);
+
+	propagate_rate(c);
+
+	return 0;
+}
+
+int clk_set_rate_cansleep(struct clk *c, unsigned long rate)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	pr_debug("%s: %s\n", __func__, c->name);
+
+	mutex_lock(&dvfs_lock);
+
+	if (rate > c->rate)
+		ret = dvfs_set_rate(c->dvfs, rate);
+	if (ret)
+		goto out;
+
+	spin_lock_irqsave(&clock_lock, flags);
+	ret = clk_set_rate_locked(c, rate);
+	spin_unlock_irqrestore(&clock_lock, flags);
+
+	if (ret)
+		goto out;
+
+	ret = dvfs_set_rate(c->dvfs, rate);
+
+out:
+	mutex_unlock(&dvfs_lock);
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate_cansleep);
+
+int clk_set_rate(struct clk *c, unsigned long rate)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	pr_debug("%s: %s\n", __func__, c->name);
+
+	if (clk_is_dvfs(c))
+		BUG();
+
+	spin_lock_irqsave(&clock_lock, flags);
+	ret = clk_set_rate_locked(c, rate);
+	spin_unlock_irqrestore(&clock_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+unsigned long clk_get_rate(struct clk *c)
+{
+	unsigned long flags;
+	unsigned long ret;
+
+	spin_lock_irqsave(&clock_lock, flags);
+
+	pr_debug("%s: %s\n", __func__, c->name);
+
+	ret = c->rate;
+
+	spin_unlock_irqrestore(&clock_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *c, unsigned long rate)
+{
+	pr_debug("%s: %s\n", __func__, c->name);
+
+	if (!c->ops || !c->ops->round_rate)
+		return -ENOSYS;
+
+	if (rate > c->max_rate)
+		rate = c->max_rate;
+
+	return c->ops->round_rate(c, rate);
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+static int tegra_clk_init_one_from_table(struct tegra_clk_init_table *table)
+{
+	struct clk *c;
+	struct clk *p;
+
+	int ret = 0;
+
+	c = tegra_get_clock_by_name(table->name);
+
+	if (!c) {
+		pr_warning("Unable to initialize clock %s\n",
+			table->name);
+		return -ENODEV;
+	}
+
+	if (table->parent) {
+		p = tegra_get_clock_by_name(table->parent);
+		if (!p) {
+			pr_warning("Unable to find parent %s of clock %s\n",
+				table->parent, table->name);
+			return -ENODEV;
+		}
+
+		if (c->parent != p) {
+			ret = clk_set_parent(c, p);
+			if (ret) {
+				pr_warning("Unable to set parent %s of clock %s: %d\n",
+					table->parent, table->name, ret);
+				return -EINVAL;
+			}
+		}
+	}
+
+	if (table->rate && table->rate != clk_get_rate(c)) {
+		ret = clk_set_rate(c, table->rate);
+		if (ret) {
+			pr_warning("Unable to set clock %s to rate %lu: %d\n",
+				table->name, table->rate, ret);
+			return -EINVAL;
+		}
+	}
+
+	if (table->enabled) {
+		ret = clk_enable(c);
+		if (ret) {
+			pr_warning("Unable to enable clock %s: %d\n",
+				table->name, ret);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+void tegra_clk_init_from_table(struct tegra_clk_init_table *table)
+{
+	for (; table->name; table++)
+		tegra_clk_init_one_from_table(table);
+}
+EXPORT_SYMBOL(tegra_clk_init_from_table);
+
+void tegra_periph_reset_deassert(struct clk *c)
+{
+	tegra2_periph_reset_deassert(c);
+}
+EXPORT_SYMBOL(tegra_periph_reset_deassert);
+
+void tegra_periph_reset_assert(struct clk *c)
+{
+	tegra2_periph_reset_assert(c);
+}
+EXPORT_SYMBOL(tegra_periph_reset_assert);
+
+void __init tegra_init_clock(void)
+{
+	tegra2_init_clocks();
+}
+
+int __init tegra_init_dvfs(void)
+{
+	struct clk *c, *safe;
+
+	mutex_lock(&dvfs_lock);
+
+	list_for_each_entry_safe(c, safe, &clocks, node)
+		if (c->dvfs)
+			dvfs_init(c);
+
+	mutex_unlock(&dvfs_lock);
+
+	return 0;
+}
+
+late_initcall(tegra_init_dvfs);
+
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *clk_debugfs_root;
+
+
+static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level)
+{
+	struct clk *child;
+	struct clk *safe;
+	const char *state = "uninit";
+	char div[8] = {0};
+
+	if (c->state == ON)
+		state = "on";
+	else if (c->state == OFF)
+		state = "off";
+
+	if (c->mul != 0 && c->div != 0) {
+		if (c->mul > c->div) {
+			int mul = c->mul / c->div;
+			int mul2 = (c->mul * 10 / c->div) % 10;
+			int mul3 = (c->mul * 10) % c->div;
+			if (mul2 == 0 && mul3 == 0)
+				snprintf(div, sizeof(div), "x%d", mul);
+			else if (mul3 == 0)
+				snprintf(div, sizeof(div), "x%d.%d", mul, mul2);
+			else
+				snprintf(div, sizeof(div), "x%d.%d..", mul, mul2);
+		} else {
+			snprintf(div, sizeof(div), "%d%s", c->div / c->mul,
+				(c->div % c->mul) ? ".5" : "");
+		}
+	}
+
+	seq_printf(s, "%*s%c%c%-*s %-6s %-3d %-8s %-10lu\n",
+		level * 3 + 1, "",
+		c->rate > c->max_rate ? '!' : ' ',
+		!c->set ? '*' : ' ',
+		30 - level * 3, c->name,
+		state, c->refcnt, div, c->rate);
+	list_for_each_entry_safe(child, safe, &c->children, sibling) {
+		clock_tree_show_one(s, child, level + 1);
+	}
+}
+
+static int clock_tree_show(struct seq_file *s, void *data)
+{
+	struct clk *c;
+	unsigned long flags;
+	seq_printf(s, "   clock                          state  ref div      rate\n");
+	seq_printf(s, "--------------------------------------------------------------\n");
+	spin_lock_irqsave(&clock_lock, flags);
+	list_for_each_entry(c, &clocks, node)
+		if (c->parent == NULL)
+			clock_tree_show_one(s, c, 0);
+	spin_unlock_irqrestore(&clock_lock, flags);
+	return 0;
+}
+
+static int clock_tree_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, clock_tree_show, inode->i_private);
+}
+
+static const struct file_operations clock_tree_fops = {
+	.open		= clock_tree_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int possible_parents_show(struct seq_file *s, void *data)
+{
+	struct clk *c = s->private;
+	int i;
+
+	for (i = 0; c->inputs[i].input; i++) {
+		char *first = (i == 0) ? "" : " ";
+		seq_printf(s, "%s%s", first, c->inputs[i].input->name);
+	}
+	seq_printf(s, "\n");
+	return 0;
+}
+
+static int possible_parents_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, possible_parents_show, inode->i_private);
+}
+
+static const struct file_operations possible_parents_fops = {
+	.open		= possible_parents_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+	struct dentry *d, *child, *child_tmp;
+
+	d = debugfs_create_dir(c->name, clk_debugfs_root);
+	if (!d)
+		return -ENOMEM;
+	c->dent = d;
+
+	d = debugfs_create_u8("refcnt", S_IRUGO, c->dent, (u8 *)&c->refcnt);
+	if (!d)
+		goto err_out;
+
+	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+	if (!d)
+		goto err_out;
+
+	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+	if (!d)
+		goto err_out;
+
+	if (c->inputs) {
+		d = debugfs_create_file("possible_parents", S_IRUGO, c->dent,
+			c, &possible_parents_fops);
+		if (!d)
+			goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	d = c->dent;
+	list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
+		debugfs_remove(child);
+	debugfs_remove(c->dent);
+	return -ENOMEM;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+	int err;
+	struct clk *pa = c->parent;
+
+	if (pa && !pa->dent) {
+		err = clk_debugfs_register(pa);
+		if (err)
+			return err;
+	}
+
+	if (!c->dent) {
+		err = clk_debugfs_register_one(c);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+	struct clk *c;
+	struct dentry *d;
+	int err = -ENOMEM;
+
+	d = debugfs_create_dir("clock", NULL);
+	if (!d)
+		return -ENOMEM;
+	clk_debugfs_root = d;
+
+	d = debugfs_create_file("clock_tree", S_IRUGO, clk_debugfs_root, NULL,
+		&clock_tree_fops);
+	if (!d)
+		goto err_out;
+
+	list_for_each_entry(c, &clocks, node) {
+		err = clk_debugfs_register(c);
+		if (err)
+			goto err_out;
+	}
+	return 0;
+err_out:
+	debugfs_remove_recursive(clk_debugfs_root);
+	return err;
+}
+
+late_initcall(clk_debugfs_init);
+#endif
diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h
new file mode 100644
index 000000000000..94fd859770f1
--- /dev/null
+++ b/arch/arm/mach-tegra/clock.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-tegra/include/mach/clock.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_CLOCK_H
+#define __MACH_TEGRA_CLOCK_H
+
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
+#define DIV_BUS			(1 << 0)
+#define DIV_U71			(1 << 1)
+#define DIV_U71_FIXED		(1 << 2)
+#define DIV_2			(1 << 3)
+#define DIV_U16			(1 << 4)
+#define PLL_FIXED		(1 << 5)
+#define PLL_HAS_CPCON		(1 << 6)
+#define MUX			(1 << 7)
+#define PLLD			(1 << 8)
+#define PERIPH_NO_RESET		(1 << 9)
+#define PERIPH_NO_ENB		(1 << 10)
+#define PERIPH_EMC_ENB		(1 << 11)
+#define PERIPH_MANUAL_RESET	(1 << 12)
+#define PLL_ALT_MISC_REG	(1 << 13)
+#define PLLU			(1 << 14)
+#define ENABLE_ON_INIT		(1 << 28)
+
+struct clk;
+struct regulator;
+
+struct dvfs_table {
+	unsigned long rate;
+	int millivolts;
+};
+
+struct dvfs_process_id_table {
+	int process_id;
+	struct dvfs_table *table;
+};
+
+
+struct dvfs {
+	struct regulator *reg;
+	struct dvfs_table *table;
+	int max_millivolts;
+
+	int process_id_table_length;
+	const char *reg_id;
+	bool cpu;
+	struct dvfs_process_id_table process_id_table[];
+};
+
+struct clk_mux_sel {
+	struct clk	*input;
+	u32		value;
+};
+
+struct clk_pll_table {
+	unsigned long	input_rate;
+	unsigned long	output_rate;
+	u16		n;
+	u16		m;
+	u8		p;
+	u8		cpcon;
+};
+
+struct clk_ops {
+	void		(*init)(struct clk *);
+	int		(*enable)(struct clk *);
+	void		(*disable)(struct clk *);
+	int		(*set_parent)(struct clk *, struct clk *);
+	int		(*set_rate)(struct clk *, unsigned long);
+	long		(*round_rate)(struct clk *, unsigned long);
+};
+
+enum clk_state {
+	UNINITIALIZED = 0,
+	ON,
+	OFF,
+};
+
+struct clk {
+	/* node for master clocks list */
+	struct list_head		node;
+	struct list_head		children;	/* list of children */
+	struct list_head		sibling;	/* node for children */
+#ifdef CONFIG_DEBUG_FS
+	struct dentry			*dent;
+	struct dentry			*parent_dent;
+#endif
+	struct clk_ops			*ops;
+	struct clk			*parent;
+	struct clk_lookup		lookup;
+	unsigned long			rate;
+	unsigned long			max_rate;
+	u32				flags;
+	u32				refcnt;
+	const char			*name;
+	u32				reg;
+	u32				reg_shift;
+	unsigned int			clk_num;
+	enum clk_state			state;
+#ifdef CONFIG_DEBUG_FS
+	bool				set;
+#endif
+
+	/* PLL */
+	unsigned long			input_min;
+	unsigned long			input_max;
+	unsigned long			cf_min;
+	unsigned long			cf_max;
+	unsigned long			vco_min;
+	unsigned long			vco_max;
+	const struct clk_pll_table	*pll_table;
+
+	/* DIV */
+	u32				div;
+	u32				mul;
+
+	/* MUX */
+	const struct clk_mux_sel	*inputs;
+	u32				sel;
+	u32				reg_mask;
+
+	/* Virtual cpu clock */
+	struct clk			*main;
+	struct clk			*backup;
+
+	struct dvfs			*dvfs;
+};
+
+
+struct clk_duplicate {
+	const char *name;
+	struct clk_lookup lookup;
+};
+
+struct tegra_clk_init_table {
+	const char *name;
+	const char *parent;
+	unsigned long rate;
+	bool enabled;
+};
+
+void tegra2_init_clocks(void);
+void tegra2_periph_reset_deassert(struct clk *c);
+void tegra2_periph_reset_assert(struct clk *c);
+void clk_init(struct clk *clk);
+struct clk *tegra_get_clock_by_name(const char *name);
+unsigned long clk_measure_input_freq(void);
+void clk_disable_locked(struct clk *c);
+int clk_enable_locked(struct clk *c);
+int clk_set_parent_locked(struct clk *c, struct clk *parent);
+int clk_set_rate_locked(struct clk *c, unsigned long rate);
+int clk_reparent(struct clk *c, struct clk *parent);
+void tegra_clk_init_from_table(struct tegra_clk_init_table *table);
+
+#endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
new file mode 100644
index 000000000000..7c91e2b9d643
--- /dev/null
+++ b/arch/arm/mach-tegra/common.c
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-tegra/board-harmony.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/iomap.h>
+#include <mach/dma.h>
+
+#include "board.h"
+#include "clock.h"
+#include "fuse.h"
+
+static __initdata struct tegra_clk_init_table common_clk_init_table[] = {
+	/* name		parent		rate		enabled */
+	{ "clk_m",	NULL,		0,		true },
+	{ "pll_p",	"clk_m",	216000000,	true },
+	{ "pll_p_out1",	"pll_p",	28800000,	true },
+	{ "pll_p_out2",	"pll_p",	48000000,	true },
+	{ "pll_p_out3",	"pll_p",	72000000,	true },
+	{ "pll_p_out4",	"pll_p",	108000000,	true },
+	{ "sclk",	"pll_p_out4",	108000000,	true },
+	{ "hclk",	"sclk",		108000000,	true },
+	{ "pclk",	"hclk",		54000000,	true },
+	{ NULL,		NULL,		0,		0},
+};
+
+void __init tegra_init_cache(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
+
+	writel(0x331, p + L2X0_TAG_LATENCY_CTRL);
+	writel(0x441, p + L2X0_DATA_LATENCY_CTRL);
+
+	l2x0_init(p, 0x6C080001, 0x8200c3fe);
+#endif
+
+}
+
+void __init tegra_common_init(void)
+{
+	tegra_init_fuse();
+	tegra_init_clock();
+	tegra_clk_init_from_table(common_clk_init_table);
+	tegra_init_cache();
+#ifdef CONFIG_TEGRA_SYSTEM_DMA
+	tegra_dma_init();
+#endif
+}
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
new file mode 100644
index 000000000000..fea5719c7072
--- /dev/null
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -0,0 +1,185 @@
+/*
+ * arch/arm/mach-tegra/cpu-tegra.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+
+#include <mach/hardware.h>
+#include <mach/clk.h>
+
+/* Frequency table index must be sequential starting at 0 */
+static struct cpufreq_frequency_table freq_table[] = {
+	{ 0, 312000 },
+	{ 1, 456000 },
+	{ 2, 608000 },
+	{ 3, 760000 },
+	{ 4, 816000 },
+	{ 5, 912000 },
+	{ 6, 1000000 },
+	{ 7, CPUFREQ_TABLE_END },
+};
+
+#define NUM_CPUS	2
+
+static struct clk *cpu_clk;
+
+static unsigned long target_cpu_speed[NUM_CPUS];
+
+int tegra_verify_speed(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, freq_table);
+}
+
+unsigned int tegra_getspeed(unsigned int cpu)
+{
+	unsigned long rate;
+
+	if (cpu >= NUM_CPUS)
+		return 0;
+
+	rate = clk_get_rate(cpu_clk) / 1000;
+	return rate;
+}
+
+static int tegra_update_cpu_speed(void)
+{
+	int i;
+	unsigned long rate = 0;
+	int ret = 0;
+	struct cpufreq_freqs freqs;
+
+	for_each_online_cpu(i)
+		rate = max(rate, target_cpu_speed[i]);
+
+	freqs.old = tegra_getspeed(0);
+	freqs.new = rate;
+
+	if (freqs.old == freqs.new)
+		return ret;
+
+	for_each_online_cpu(freqs.cpu)
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+#ifdef CONFIG_CPU_FREQ_DEBUG
+	printk(KERN_DEBUG "cpufreq-tegra: transition: %u --> %u\n",
+	       freqs.old, freqs.new);
+#endif
+
+	ret = clk_set_rate_cansleep(cpu_clk, freqs.new * 1000);
+	if (ret) {
+		pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n",
+			freqs.new);
+		return ret;
+	}
+
+	for_each_online_cpu(freqs.cpu)
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+static int tegra_target(struct cpufreq_policy *policy,
+		       unsigned int target_freq,
+		       unsigned int relation)
+{
+	int idx;
+	unsigned int freq;
+
+	cpufreq_frequency_table_target(policy, freq_table, target_freq,
+		relation, &idx);
+
+	freq = freq_table[idx].frequency;
+
+	target_cpu_speed[policy->cpu] = freq;
+
+	return tegra_update_cpu_speed();
+}
+
+static int tegra_cpu_init(struct cpufreq_policy *policy)
+{
+	if (policy->cpu >= NUM_CPUS)
+		return -EINVAL;
+
+	cpu_clk = clk_get_sys(NULL, "cpu");
+	if (IS_ERR(cpu_clk))
+		return PTR_ERR(cpu_clk);
+
+	cpufreq_frequency_table_cpuinfo(policy, freq_table);
+	cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+	policy->cur = tegra_getspeed(policy->cpu);
+	target_cpu_speed[policy->cpu] = policy->cur;
+
+	/* FIXME: what's the actual transition time? */
+	policy->cpuinfo.transition_latency = 300 * 1000;
+
+	policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+	cpumask_copy(policy->related_cpus, cpu_possible_mask);
+
+	return 0;
+}
+
+static int tegra_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_cpuinfo(policy, freq_table);
+	clk_put(cpu_clk);
+	return 0;
+}
+
+static struct freq_attr *tegra_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver tegra_cpufreq_driver = {
+	.verify		= tegra_verify_speed,
+	.target		= tegra_target,
+	.get		= tegra_getspeed,
+	.init		= tegra_cpu_init,
+	.exit		= tegra_cpu_exit,
+	.name		= "tegra",
+	.attr		= tegra_cpufreq_attr,
+};
+
+static int __init tegra_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&tegra_cpufreq_driver);
+}
+
+static void __exit tegra_cpufreq_exit(void)
+{
+        cpufreq_unregister_driver(&tegra_cpufreq_driver);
+}
+
+
+MODULE_AUTHOR("Colin Cross <ccross@android.com>");
+MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2");
+MODULE_LICENSE("GPL");
+module_init(tegra_cpufreq_init);
+module_exit(tegra_cpufreq_exit);
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
new file mode 100644
index 000000000000..edda6ec5e925
--- /dev/null
+++ b/arch/arm/mach-tegra/dma.c
@@ -0,0 +1,752 @@
+/*
+ * arch/arm/mach-tegra/dma.c
+ *
+ * System DMA driver for NVIDIA Tegra SoCs
+ *
+ * Copyright (c) 2008-2009, NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+#include <mach/iomap.h>
+
+#define APB_DMA_GEN				0x000
+#define GEN_ENABLE				(1<<31)
+
+#define APB_DMA_CNTRL				0x010
+
+#define APB_DMA_IRQ_MASK			0x01c
+
+#define APB_DMA_IRQ_MASK_SET			0x020
+
+#define APB_DMA_CHAN_CSR			0x000
+#define CSR_ENB					(1<<31)
+#define CSR_IE_EOC				(1<<30)
+#define CSR_HOLD				(1<<29)
+#define CSR_DIR					(1<<28)
+#define CSR_ONCE				(1<<27)
+#define CSR_FLOW				(1<<21)
+#define CSR_REQ_SEL_SHIFT			16
+#define CSR_REQ_SEL_MASK			(0x1F<<CSR_REQ_SEL_SHIFT)
+#define CSR_REQ_SEL_INVALID			(31<<CSR_REQ_SEL_SHIFT)
+#define CSR_WCOUNT_SHIFT			2
+#define CSR_WCOUNT_MASK				0xFFFC
+
+#define APB_DMA_CHAN_STA				0x004
+#define STA_BUSY				(1<<31)
+#define STA_ISE_EOC				(1<<30)
+#define STA_HALT				(1<<29)
+#define STA_PING_PONG				(1<<28)
+#define STA_COUNT_SHIFT				2
+#define STA_COUNT_MASK				0xFFFC
+
+#define APB_DMA_CHAN_AHB_PTR				0x010
+
+#define APB_DMA_CHAN_AHB_SEQ				0x014
+#define AHB_SEQ_INTR_ENB			(1<<31)
+#define AHB_SEQ_BUS_WIDTH_SHIFT			28
+#define AHB_SEQ_BUS_WIDTH_MASK			(0x7<<AHB_SEQ_BUS_WIDTH_SHIFT)
+#define AHB_SEQ_BUS_WIDTH_8			(0<<AHB_SEQ_BUS_WIDTH_SHIFT)
+#define AHB_SEQ_BUS_WIDTH_16			(1<<AHB_SEQ_BUS_WIDTH_SHIFT)
+#define AHB_SEQ_BUS_WIDTH_32			(2<<AHB_SEQ_BUS_WIDTH_SHIFT)
+#define AHB_SEQ_BUS_WIDTH_64			(3<<AHB_SEQ_BUS_WIDTH_SHIFT)
+#define AHB_SEQ_BUS_WIDTH_128			(4<<AHB_SEQ_BUS_WIDTH_SHIFT)
+#define AHB_SEQ_DATA_SWAP			(1<<27)
+#define AHB_SEQ_BURST_MASK			(0x7<<24)
+#define AHB_SEQ_BURST_1				(4<<24)
+#define AHB_SEQ_BURST_4				(5<<24)
+#define AHB_SEQ_BURST_8				(6<<24)
+#define AHB_SEQ_DBL_BUF				(1<<19)
+#define AHB_SEQ_WRAP_SHIFT			16
+#define AHB_SEQ_WRAP_MASK			(0x7<<AHB_SEQ_WRAP_SHIFT)
+
+#define APB_DMA_CHAN_APB_PTR				0x018
+
+#define APB_DMA_CHAN_APB_SEQ				0x01c
+#define APB_SEQ_BUS_WIDTH_SHIFT			28
+#define APB_SEQ_BUS_WIDTH_MASK			(0x7<<APB_SEQ_BUS_WIDTH_SHIFT)
+#define APB_SEQ_BUS_WIDTH_8			(0<<APB_SEQ_BUS_WIDTH_SHIFT)
+#define APB_SEQ_BUS_WIDTH_16			(1<<APB_SEQ_BUS_WIDTH_SHIFT)
+#define APB_SEQ_BUS_WIDTH_32			(2<<APB_SEQ_BUS_WIDTH_SHIFT)
+#define APB_SEQ_BUS_WIDTH_64			(3<<APB_SEQ_BUS_WIDTH_SHIFT)
+#define APB_SEQ_BUS_WIDTH_128			(4<<APB_SEQ_BUS_WIDTH_SHIFT)
+#define APB_SEQ_DATA_SWAP			(1<<27)
+#define APB_SEQ_WRAP_SHIFT			16
+#define APB_SEQ_WRAP_MASK			(0x7<<APB_SEQ_WRAP_SHIFT)
+
+#define TEGRA_SYSTEM_DMA_CH_NR			16
+#define TEGRA_SYSTEM_DMA_AVP_CH_NUM		4
+#define TEGRA_SYSTEM_DMA_CH_MIN			0
+#define TEGRA_SYSTEM_DMA_CH_MAX	\
+	(TEGRA_SYSTEM_DMA_CH_NR - TEGRA_SYSTEM_DMA_AVP_CH_NUM - 1)
+
+#define NV_DMA_MAX_TRASFER_SIZE 0x10000
+
+const unsigned int ahb_addr_wrap_table[8] = {
+	0, 32, 64, 128, 256, 512, 1024, 2048
+};
+
+const unsigned int apb_addr_wrap_table[8] = {0, 1, 2, 4, 8, 16, 32, 64};
+
+const unsigned int bus_width_table[5] = {8, 16, 32, 64, 128};
+
+#define TEGRA_DMA_NAME_SIZE 16
+struct tegra_dma_channel {
+	struct list_head	list;
+	int			id;
+	spinlock_t		lock;
+	char			name[TEGRA_DMA_NAME_SIZE];
+	void  __iomem		*addr;
+	int			mode;
+	int			irq;
+
+	/* Register shadow */
+	u32			csr;
+	u32			ahb_seq;
+	u32			ahb_ptr;
+	u32			apb_seq;
+	u32			apb_ptr;
+};
+
+#define  NV_DMA_MAX_CHANNELS  32
+
+static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS);
+static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS];
+
+static void tegra_dma_update_hw(struct tegra_dma_channel *ch,
+	struct tegra_dma_req *req);
+static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch,
+	struct tegra_dma_req *req);
+static void tegra_dma_init_hw(struct tegra_dma_channel *ch);
+static void tegra_dma_stop(struct tegra_dma_channel *ch);
+
+void tegra_dma_flush(struct tegra_dma_channel *ch)
+{
+}
+EXPORT_SYMBOL(tegra_dma_flush);
+
+void tegra_dma_dequeue(struct tegra_dma_channel *ch)
+{
+	struct tegra_dma_req *req;
+
+	req = list_entry(ch->list.next, typeof(*req), node);
+
+	tegra_dma_dequeue_req(ch, req);
+	return;
+}
+
+void tegra_dma_stop(struct tegra_dma_channel *ch)
+{
+	unsigned int csr;
+	unsigned int status;
+
+	csr = ch->csr;
+	csr &= ~CSR_IE_EOC;
+	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
+
+	csr &= ~CSR_ENB;
+	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
+
+	status = readl(ch->addr + APB_DMA_CHAN_STA);
+	if (status & STA_ISE_EOC)
+		writel(status, ch->addr + APB_DMA_CHAN_STA);
+}
+
+int tegra_dma_cancel(struct tegra_dma_channel *ch)
+{
+	unsigned int csr;
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&ch->lock, irq_flags);
+	while (!list_empty(&ch->list))
+		list_del(ch->list.next);
+
+	csr = ch->csr;
+	csr &= ~CSR_REQ_SEL_MASK;
+	csr |= CSR_REQ_SEL_INVALID;
+
+	/* Set the enable as that is not shadowed */
+	csr |= CSR_ENB;
+	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
+
+	tegra_dma_stop(ch);
+
+	spin_unlock_irqrestore(&ch->lock, irq_flags);
+	return 0;
+}
+
+int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
+	struct tegra_dma_req *_req)
+{
+	unsigned int csr;
+	unsigned int status;
+	struct tegra_dma_req *req = NULL;
+	int found = 0;
+	unsigned long irq_flags;
+	int to_transfer;
+	int req_transfer_count;
+
+	spin_lock_irqsave(&ch->lock, irq_flags);
+	list_for_each_entry(req, &ch->list, node) {
+		if (req == _req) {
+			list_del(&req->node);
+			found = 1;
+			break;
+		}
+	}
+	if (!found) {
+		spin_unlock_irqrestore(&ch->lock, irq_flags);
+		return 0;
+	}
+
+	/* STOP the DMA and get the transfer count.
+	 * Getting the transfer count is tricky.
+	 *  - Change the source selector to invalid to stop the DMA from
+	 *    FIFO to memory.
+	 *  - Read the status register to know the number of pending
+	 *    bytes to be transfered.
+	 *  - Finally stop or program the DMA to the next buffer in the
+	 *    list.
+	 */
+	csr = ch->csr;
+	csr &= ~CSR_REQ_SEL_MASK;
+	csr |= CSR_REQ_SEL_INVALID;
+
+	/* Set the enable as that is not shadowed */
+	csr |= CSR_ENB;
+	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
+
+	/* Get the transfer count */
+	status = readl(ch->addr + APB_DMA_CHAN_STA);
+	to_transfer = (status & STA_COUNT_MASK) >> STA_COUNT_SHIFT;
+	req_transfer_count = (ch->csr & CSR_WCOUNT_MASK) >> CSR_WCOUNT_SHIFT;
+	req_transfer_count += 1;
+	to_transfer += 1;
+
+	req->bytes_transferred = req_transfer_count;
+
+	if (status & STA_BUSY)
+		req->bytes_transferred -= to_transfer;
+
+	/* In continous transfer mode, DMA only tracks the count of the
+	 * half DMA buffer. So, if the DMA already finished half the DMA
+	 * then add the half buffer to the completed count.
+	 *
+	 *	FIXME: There can be a race here. What if the req to
+	 *	dequue happens at the same time as the DMA just moved to
+	 *	the new buffer and SW didn't yet received the interrupt?
+	 */
+	if (ch->mode & TEGRA_DMA_MODE_CONTINOUS)
+		if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL)
+			req->bytes_transferred += req_transfer_count;
+
+	req->bytes_transferred *= 4;
+
+	tegra_dma_stop(ch);
+	if (!list_empty(&ch->list)) {
+		/* if the list is not empty, queue the next request */
+		struct tegra_dma_req *next_req;
+		next_req = list_entry(ch->list.next,
+			typeof(*next_req), node);
+		tegra_dma_update_hw(ch, next_req);
+	}
+	req->status = -TEGRA_DMA_REQ_ERROR_ABORTED;
+
+	spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+	/* Callback should be called without any lock */
+	req->complete(req);
+	return 0;
+}
+EXPORT_SYMBOL(tegra_dma_dequeue_req);
+
+bool tegra_dma_is_empty(struct tegra_dma_channel *ch)
+{
+	unsigned long irq_flags;
+	bool is_empty;
+
+	spin_lock_irqsave(&ch->lock, irq_flags);
+	if (list_empty(&ch->list))
+		is_empty = true;
+	else
+		is_empty = false;
+	spin_unlock_irqrestore(&ch->lock, irq_flags);
+	return is_empty;
+}
+EXPORT_SYMBOL(tegra_dma_is_empty);
+
+bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch,
+	struct tegra_dma_req *_req)
+{
+	unsigned long irq_flags;
+	struct tegra_dma_req *req;
+
+	spin_lock_irqsave(&ch->lock, irq_flags);
+	list_for_each_entry(req, &ch->list, node) {
+		if (req == _req) {
+			spin_unlock_irqrestore(&ch->lock, irq_flags);
+			return true;
+		}
+	}
+	spin_unlock_irqrestore(&ch->lock, irq_flags);
+	return false;
+}
+EXPORT_SYMBOL(tegra_dma_is_req_inflight);
+
+int tegra_dma_enqueue_req(struct tegra_dma_channel *ch,
+	struct tegra_dma_req *req)
+{
+	unsigned long irq_flags;
+	int start_dma = 0;
+
+	if (req->size > NV_DMA_MAX_TRASFER_SIZE ||
+		req->source_addr & 0x3 || req->dest_addr & 0x3) {
+		pr_err("Invalid DMA request for channel %d\n", ch->id);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&ch->lock, irq_flags);
+
+	req->bytes_transferred = 0;
+	req->status = 0;
+	req->buffer_status = 0;
+	if (list_empty(&ch->list))
+		start_dma = 1;
+
+	list_add_tail(&req->node, &ch->list);
+
+	if (start_dma)
+		tegra_dma_update_hw(ch, req);
+
+	spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(tegra_dma_enqueue_req);
+
+struct tegra_dma_channel *tegra_dma_allocate_channel(int mode)
+{
+	int channel;
+	struct tegra_dma_channel *ch;
+
+	/* first channel is the shared channel */
+	if (mode & TEGRA_DMA_SHARED) {
+		channel = TEGRA_SYSTEM_DMA_CH_MIN;
+	} else {
+		channel = find_first_zero_bit(channel_usage,
+			ARRAY_SIZE(dma_channels));
+		if (channel >= ARRAY_SIZE(dma_channels))
+			return NULL;
+	}
+	__set_bit(channel, channel_usage);
+	ch = &dma_channels[channel];
+	ch->mode = mode;
+	return ch;
+}
+EXPORT_SYMBOL(tegra_dma_allocate_channel);
+
+void tegra_dma_free_channel(struct tegra_dma_channel *ch)
+{
+	if (ch->mode & TEGRA_DMA_SHARED)
+		return;
+	tegra_dma_cancel(ch);
+	__clear_bit(ch->id, channel_usage);
+}
+EXPORT_SYMBOL(tegra_dma_free_channel);
+
+static void tegra_dma_update_hw_partial(struct tegra_dma_channel *ch,
+	struct tegra_dma_req *req)
+{
+	if (req->to_memory) {
+		ch->apb_ptr = req->source_addr;
+		ch->ahb_ptr = req->dest_addr;
+	} else {
+		ch->apb_ptr = req->dest_addr;
+		ch->ahb_ptr = req->source_addr;
+	}
+	writel(ch->apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR);
+	writel(ch->ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR);
+
+	req->status = TEGRA_DMA_REQ_INFLIGHT;
+	return;
+}
+
+static void tegra_dma_update_hw(struct tegra_dma_channel *ch,
+	struct tegra_dma_req *req)
+{
+	int ahb_addr_wrap;
+	int apb_addr_wrap;
+	int ahb_bus_width;
+	int apb_bus_width;
+	int index;
+	unsigned long csr;
+
+
+	ch->csr |= CSR_FLOW;
+	ch->csr &= ~CSR_REQ_SEL_MASK;
+	ch->csr |= req->req_sel << CSR_REQ_SEL_SHIFT;
+	ch->ahb_seq &= ~AHB_SEQ_BURST_MASK;
+	ch->ahb_seq |= AHB_SEQ_BURST_1;
+
+	/* One shot mode is always single buffered,
+	 * continuous mode is always double buffered
+	 * */
+	if (ch->mode & TEGRA_DMA_MODE_ONESHOT) {
+		ch->csr |= CSR_ONCE;
+		ch->ahb_seq &= ~AHB_SEQ_DBL_BUF;
+		ch->csr &= ~CSR_WCOUNT_MASK;
+		ch->csr |= ((req->size>>2) - 1) << CSR_WCOUNT_SHIFT;
+	} else {
+		ch->csr &= ~CSR_ONCE;
+		ch->ahb_seq |= AHB_SEQ_DBL_BUF;
+
+		/* In double buffered mode, we set the size to half the
+		 * requested size and interrupt when half the buffer
+		 * is full */
+		ch->csr &= ~CSR_WCOUNT_MASK;
+		ch->csr |= ((req->size>>3) - 1) << CSR_WCOUNT_SHIFT;
+	}
+
+	if (req->to_memory) {
+		ch->csr &= ~CSR_DIR;
+		ch->apb_ptr = req->source_addr;
+		ch->ahb_ptr = req->dest_addr;
+
+		apb_addr_wrap = req->source_wrap;
+		ahb_addr_wrap = req->dest_wrap;
+		apb_bus_width = req->source_bus_width;
+		ahb_bus_width = req->dest_bus_width;
+
+	} else {
+		ch->csr |= CSR_DIR;
+		ch->apb_ptr = req->dest_addr;
+		ch->ahb_ptr = req->source_addr;
+
+		apb_addr_wrap = req->dest_wrap;
+		ahb_addr_wrap = req->source_wrap;
+		apb_bus_width = req->dest_bus_width;
+		ahb_bus_width = req->source_bus_width;
+	}
+
+	apb_addr_wrap >>= 2;
+	ahb_addr_wrap >>= 2;
+
+	/* set address wrap for APB size */
+	index = 0;
+	do  {
+		if (apb_addr_wrap_table[index] == apb_addr_wrap)
+			break;
+		index++;
+	} while (index < ARRAY_SIZE(apb_addr_wrap_table));
+	BUG_ON(index == ARRAY_SIZE(apb_addr_wrap_table));
+	ch->apb_seq &= ~APB_SEQ_WRAP_MASK;
+	ch->apb_seq |= index << APB_SEQ_WRAP_SHIFT;
+
+	/* set address wrap for AHB size */
+	index = 0;
+	do  {
+		if (ahb_addr_wrap_table[index] == ahb_addr_wrap)
+			break;
+		index++;
+	} while (index < ARRAY_SIZE(ahb_addr_wrap_table));
+	BUG_ON(index == ARRAY_SIZE(ahb_addr_wrap_table));
+	ch->ahb_seq &= ~AHB_SEQ_WRAP_MASK;
+	ch->ahb_seq |= index << AHB_SEQ_WRAP_SHIFT;
+
+	for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) {
+		if (bus_width_table[index] == ahb_bus_width)
+			break;
+	}
+	BUG_ON(index == ARRAY_SIZE(bus_width_table));
+	ch->ahb_seq &= ~AHB_SEQ_BUS_WIDTH_MASK;
+	ch->ahb_seq |= index << AHB_SEQ_BUS_WIDTH_SHIFT;
+
+	for (index = 0; index < ARRAY_SIZE(bus_width_table); index++) {
+		if (bus_width_table[index] == apb_bus_width)
+			break;
+	}
+	BUG_ON(index == ARRAY_SIZE(bus_width_table));
+	ch->apb_seq &= ~APB_SEQ_BUS_WIDTH_MASK;
+	ch->apb_seq |= index << APB_SEQ_BUS_WIDTH_SHIFT;
+
+	ch->csr |= CSR_IE_EOC;
+
+	/* update hw registers with the shadow */
+	writel(ch->csr, ch->addr + APB_DMA_CHAN_CSR);
+	writel(ch->apb_seq, ch->addr + APB_DMA_CHAN_APB_SEQ);
+	writel(ch->apb_ptr, ch->addr + APB_DMA_CHAN_APB_PTR);
+	writel(ch->ahb_seq, ch->addr + APB_DMA_CHAN_AHB_SEQ);
+	writel(ch->ahb_ptr, ch->addr + APB_DMA_CHAN_AHB_PTR);
+
+	csr = ch->csr | CSR_ENB;
+	writel(csr, ch->addr + APB_DMA_CHAN_CSR);
+
+	req->status = TEGRA_DMA_REQ_INFLIGHT;
+}
+
+static void tegra_dma_init_hw(struct tegra_dma_channel *ch)
+{
+	/* One shot with an interrupt to CPU after transfer */
+	ch->csr = CSR_ONCE | CSR_IE_EOC;
+	ch->ahb_seq = AHB_SEQ_BUS_WIDTH_32 | AHB_SEQ_INTR_ENB;
+	ch->apb_seq = APB_SEQ_BUS_WIDTH_32 | 1 << APB_SEQ_WRAP_SHIFT;
+}
+
+static void handle_oneshot_dma(struct tegra_dma_channel *ch)
+{
+	struct tegra_dma_req *req;
+
+	spin_lock(&ch->lock);
+	if (list_empty(&ch->list)) {
+		spin_unlock(&ch->lock);
+		return;
+	}
+
+	req = list_entry(ch->list.next, typeof(*req), node);
+	if (req) {
+		int bytes_transferred;
+
+		bytes_transferred =
+			(ch->csr & CSR_WCOUNT_MASK) >> CSR_WCOUNT_SHIFT;
+		bytes_transferred += 1;
+		bytes_transferred <<= 2;
+
+		list_del(&req->node);
+		req->bytes_transferred = bytes_transferred;
+		req->status = TEGRA_DMA_REQ_SUCCESS;
+
+		spin_unlock(&ch->lock);
+		/* Callback should be called without any lock */
+		pr_debug("%s: transferred %d bytes\n", __func__,
+			req->bytes_transferred);
+		req->complete(req);
+		spin_lock(&ch->lock);
+	}
+
+	if (!list_empty(&ch->list)) {
+		req = list_entry(ch->list.next, typeof(*req), node);
+		/* the complete function we just called may have enqueued
+		   another req, in which case dma has already started */
+		if (req->status != TEGRA_DMA_REQ_INFLIGHT)
+			tegra_dma_update_hw(ch, req);
+	}
+	spin_unlock(&ch->lock);
+}
+
+static void handle_continuous_dma(struct tegra_dma_channel *ch)
+{
+	struct tegra_dma_req *req;
+
+	spin_lock(&ch->lock);
+	if (list_empty(&ch->list)) {
+		spin_unlock(&ch->lock);
+		return;
+	}
+
+	req = list_entry(ch->list.next, typeof(*req), node);
+	if (req) {
+		if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_EMPTY) {
+			/* Load the next request into the hardware, if available
+			 * */
+			if (!list_is_last(&req->node, &ch->list)) {
+				struct tegra_dma_req *next_req;
+
+				next_req = list_entry(req->node.next,
+					typeof(*next_req), node);
+				tegra_dma_update_hw_partial(ch, next_req);
+			}
+			req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL;
+			req->status = TEGRA_DMA_REQ_SUCCESS;
+			/* DMA lock is NOT held when callback is called */
+			spin_unlock(&ch->lock);
+			if (likely(req->threshold))
+				req->threshold(req);
+			return;
+
+		} else if (req->buffer_status ==
+			TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL) {
+			/* Callback when the buffer is completely full (i.e on
+			 * the second  interrupt */
+			int bytes_transferred;
+
+			bytes_transferred =
+				(ch->csr & CSR_WCOUNT_MASK) >> CSR_WCOUNT_SHIFT;
+			bytes_transferred += 1;
+			bytes_transferred <<= 3;
+
+			req->buffer_status = TEGRA_DMA_REQ_BUF_STATUS_FULL;
+			req->bytes_transferred = bytes_transferred;
+			req->status = TEGRA_DMA_REQ_SUCCESS;
+			list_del(&req->node);
+
+			/* DMA lock is NOT held when callbak is called */
+			spin_unlock(&ch->lock);
+			req->complete(req);
+			return;
+
+		} else {
+			BUG();
+		}
+	}
+	spin_unlock(&ch->lock);
+}
+
+static irqreturn_t dma_isr(int irq, void *data)
+{
+	struct tegra_dma_channel *ch = data;
+	unsigned long status;
+
+	status = readl(ch->addr + APB_DMA_CHAN_STA);
+	if (status & STA_ISE_EOC)
+		writel(status, ch->addr + APB_DMA_CHAN_STA);
+	else {
+		pr_warning("Got a spurious ISR for DMA channel %d\n", ch->id);
+		return IRQ_HANDLED;
+	}
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t dma_thread_fn(int irq, void *data)
+{
+	struct tegra_dma_channel *ch = data;
+
+	if (ch->mode & TEGRA_DMA_MODE_ONESHOT)
+		handle_oneshot_dma(ch);
+	else
+		handle_continuous_dma(ch);
+
+
+	return IRQ_HANDLED;
+}
+
+int __init tegra_dma_init(void)
+{
+	int ret = 0;
+	int i;
+	unsigned int irq;
+	void __iomem *addr;
+
+	addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
+	writel(GEN_ENABLE, addr + APB_DMA_GEN);
+	writel(0, addr + APB_DMA_CNTRL);
+	writel(0xFFFFFFFFul >> (31 - TEGRA_SYSTEM_DMA_CH_MAX),
+	       addr + APB_DMA_IRQ_MASK_SET);
+
+	memset(channel_usage, 0, sizeof(channel_usage));
+	memset(dma_channels, 0, sizeof(dma_channels));
+
+	/* Reserve all the channels we are not supposed to touch */
+	for (i = 0; i < TEGRA_SYSTEM_DMA_CH_MIN; i++)
+		__set_bit(i, channel_usage);
+
+	for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) {
+		struct tegra_dma_channel *ch = &dma_channels[i];
+
+		__clear_bit(i, channel_usage);
+
+		ch->id = i;
+		snprintf(ch->name, TEGRA_DMA_NAME_SIZE, "dma_channel_%d", i);
+
+		ch->addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
+			TEGRA_APB_DMA_CH0_SIZE * i);
+
+		spin_lock_init(&ch->lock);
+		INIT_LIST_HEAD(&ch->list);
+		tegra_dma_init_hw(ch);
+
+		irq = INT_APB_DMA_CH0 + i;
+		ret = request_threaded_irq(irq, dma_isr, dma_thread_fn, 0,
+			dma_channels[i].name, ch);
+		if (ret) {
+			pr_err("Failed to register IRQ %d for DMA %d\n",
+				irq, i);
+			goto fail;
+		}
+		ch->irq = irq;
+	}
+	/* mark the shared channel allocated */
+	__set_bit(TEGRA_SYSTEM_DMA_CH_MIN, channel_usage);
+
+	for (i = TEGRA_SYSTEM_DMA_CH_MAX+1; i < NV_DMA_MAX_CHANNELS; i++)
+		__set_bit(i, channel_usage);
+
+	return ret;
+fail:
+	writel(0, addr + APB_DMA_GEN);
+	for (i = TEGRA_SYSTEM_DMA_CH_MIN; i <= TEGRA_SYSTEM_DMA_CH_MAX; i++) {
+		struct tegra_dma_channel *ch = &dma_channels[i];
+		if (ch->irq)
+			free_irq(ch->irq, ch);
+	}
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static u32 apb_dma[5*TEGRA_SYSTEM_DMA_CH_NR + 3];
+
+void tegra_dma_suspend(void)
+{
+	void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
+	u32 *ctx = apb_dma;
+	int i;
+
+	*ctx++ = readl(addr + APB_DMA_GEN);
+	*ctx++ = readl(addr + APB_DMA_CNTRL);
+	*ctx++ = readl(addr + APB_DMA_IRQ_MASK);
+
+	for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) {
+		addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
+				  TEGRA_APB_DMA_CH0_SIZE * i);
+
+		*ctx++ = readl(addr + APB_DMA_CHAN_CSR);
+		*ctx++ = readl(addr + APB_DMA_CHAN_AHB_PTR);
+		*ctx++ = readl(addr + APB_DMA_CHAN_AHB_SEQ);
+		*ctx++ = readl(addr + APB_DMA_CHAN_APB_PTR);
+		*ctx++ = readl(addr + APB_DMA_CHAN_APB_SEQ);
+	}
+}
+
+void tegra_dma_resume(void)
+{
+	void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
+	u32 *ctx = apb_dma;
+	int i;
+
+	writel(*ctx++, addr + APB_DMA_GEN);
+	writel(*ctx++, addr + APB_DMA_CNTRL);
+	writel(*ctx++, addr + APB_DMA_IRQ_MASK);
+
+	for (i = 0; i < TEGRA_SYSTEM_DMA_CH_NR; i++) {
+		addr = IO_ADDRESS(TEGRA_APB_DMA_CH0_BASE +
+				  TEGRA_APB_DMA_CH0_SIZE * i);
+
+		writel(*ctx++, addr + APB_DMA_CHAN_CSR);
+		writel(*ctx++, addr + APB_DMA_CHAN_AHB_PTR);
+		writel(*ctx++, addr + APB_DMA_CHAN_AHB_SEQ);
+		writel(*ctx++, addr + APB_DMA_CHAN_APB_PTR);
+		writel(*ctx++, addr + APB_DMA_CHAN_APB_SEQ);
+	}
+}
+
+#endif
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
new file mode 100644
index 000000000000..1fa26d9a1a68
--- /dev/null
+++ b/arch/arm/mach-tegra/fuse.c
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/mach-tegra/fuse.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include <mach/iomap.h>
+
+#include "fuse.h"
+
+#define FUSE_UID_LOW		0x108
+#define FUSE_UID_HIGH		0x10c
+#define FUSE_SKU_INFO		0x110
+#define FUSE_SPARE_BIT		0x200
+
+static inline u32 fuse_readl(unsigned long offset)
+{
+	return readl(IO_TO_VIRT(TEGRA_FUSE_BASE + offset));
+}
+
+static inline void fuse_writel(u32 value, unsigned long offset)
+{
+	writel(value, IO_TO_VIRT(TEGRA_FUSE_BASE + offset));
+}
+
+void tegra_init_fuse(void)
+{
+	u32 reg = readl(IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
+	reg |= 1 << 28;
+	writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
+
+	pr_info("Tegra SKU: %d CPU Process: %d Core Process: %d\n",
+		tegra_sku_id(), tegra_cpu_process_id(),
+		tegra_core_process_id());
+}
+
+unsigned long long tegra_chip_uid(void)
+{
+	unsigned long long lo, hi;
+
+	lo = fuse_readl(FUSE_UID_LOW);
+	hi = fuse_readl(FUSE_UID_HIGH);
+	return (hi << 32ull) | lo;
+}
+
+int tegra_sku_id(void)
+{
+	int sku_id;
+	u32 reg = fuse_readl(FUSE_SKU_INFO);
+	sku_id = reg & 0xFF;
+	return sku_id;
+}
+
+int tegra_cpu_process_id(void)
+{
+	int cpu_process_id;
+	u32 reg = fuse_readl(FUSE_SPARE_BIT);
+	cpu_process_id = (reg >> 6) & 3;
+	return cpu_process_id;
+}
+
+int tegra_core_process_id(void)
+{
+	int core_process_id;
+	u32 reg = fuse_readl(FUSE_SPARE_BIT);
+	core_process_id = (reg >> 12) & 3;
+	return core_process_id;
+}
diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h
new file mode 100644
index 000000000000..584b2e27dbda
--- /dev/null
+++ b/arch/arm/mach-tegra/fuse.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-tegra/fuse.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+unsigned long long tegra_chip_uid(void);
+int tegra_sku_id(void);
+int tegra_cpu_process_id(void);
+int tegra_core_process_id(void);
+void tegra_init_fuse(void);
diff --git a/arch/arm/mach-tegra/gpio-names.h b/arch/arm/mach-tegra/gpio-names.h
new file mode 100644
index 000000000000..f28220a641b2
--- /dev/null
+++ b/arch/arm/mach-tegra/gpio-names.h
@@ -0,0 +1,247 @@
+/*
+ * arch/arm/mach-tegra/include/mach/gpio-names.h
+ *
+ * Copyright (c) 2010 Google, Inc
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_TEGRA_GPIO_NAMES_H
+#define __MACH_TEGRA_GPIO_NAMES_H
+
+#define TEGRA_GPIO_PA0		0
+#define TEGRA_GPIO_PA1		1
+#define TEGRA_GPIO_PA2		2
+#define TEGRA_GPIO_PA3		3
+#define TEGRA_GPIO_PA4		4
+#define TEGRA_GPIO_PA5		5
+#define TEGRA_GPIO_PA6		6
+#define TEGRA_GPIO_PA7		7
+#define TEGRA_GPIO_PB0		8
+#define TEGRA_GPIO_PB1		9
+#define TEGRA_GPIO_PB2		10
+#define TEGRA_GPIO_PB3		11
+#define TEGRA_GPIO_PB4		12
+#define TEGRA_GPIO_PB5		13
+#define TEGRA_GPIO_PB6		14
+#define TEGRA_GPIO_PB7		15
+#define TEGRA_GPIO_PC0		16
+#define TEGRA_GPIO_PC1		17
+#define TEGRA_GPIO_PC2		18
+#define TEGRA_GPIO_PC3		19
+#define TEGRA_GPIO_PC4		20
+#define TEGRA_GPIO_PC5		21
+#define TEGRA_GPIO_PC6		22
+#define TEGRA_GPIO_PC7		23
+#define TEGRA_GPIO_PD0		24
+#define TEGRA_GPIO_PD1		25
+#define TEGRA_GPIO_PD2		26
+#define TEGRA_GPIO_PD3		27
+#define TEGRA_GPIO_PD4		28
+#define TEGRA_GPIO_PD5		29
+#define TEGRA_GPIO_PD6		30
+#define TEGRA_GPIO_PD7		31
+#define TEGRA_GPIO_PE0		32
+#define TEGRA_GPIO_PE1		33
+#define TEGRA_GPIO_PE2		34
+#define TEGRA_GPIO_PE3		35
+#define TEGRA_GPIO_PE4		36
+#define TEGRA_GPIO_PE5		37
+#define TEGRA_GPIO_PE6		38
+#define TEGRA_GPIO_PE7		39
+#define TEGRA_GPIO_PF0		40
+#define TEGRA_GPIO_PF1		41
+#define TEGRA_GPIO_PF2		42
+#define TEGRA_GPIO_PF3		43
+#define TEGRA_GPIO_PF4		44
+#define TEGRA_GPIO_PF5		45
+#define TEGRA_GPIO_PF6		46
+#define TEGRA_GPIO_PF7		47
+#define TEGRA_GPIO_PG0		48
+#define TEGRA_GPIO_PG1		49
+#define TEGRA_GPIO_PG2		50
+#define TEGRA_GPIO_PG3		51
+#define TEGRA_GPIO_PG4		52
+#define TEGRA_GPIO_PG5		53
+#define TEGRA_GPIO_PG6		54
+#define TEGRA_GPIO_PG7		55
+#define TEGRA_GPIO_PH0		56
+#define TEGRA_GPIO_PH1		57
+#define TEGRA_GPIO_PH2		58
+#define TEGRA_GPIO_PH3		59
+#define TEGRA_GPIO_PH4		60
+#define TEGRA_GPIO_PH5		61
+#define TEGRA_GPIO_PH6		62
+#define TEGRA_GPIO_PH7		63
+#define TEGRA_GPIO_PI0		64
+#define TEGRA_GPIO_PI1		65
+#define TEGRA_GPIO_PI2		66
+#define TEGRA_GPIO_PI3		67
+#define TEGRA_GPIO_PI4		68
+#define TEGRA_GPIO_PI5		69
+#define TEGRA_GPIO_PI6		70
+#define TEGRA_GPIO_PI7		71
+#define TEGRA_GPIO_PJ0		72
+#define TEGRA_GPIO_PJ1		73
+#define TEGRA_GPIO_PJ2		74
+#define TEGRA_GPIO_PJ3		75
+#define TEGRA_GPIO_PJ4		76
+#define TEGRA_GPIO_PJ5		77
+#define TEGRA_GPIO_PJ6		78
+#define TEGRA_GPIO_PJ7		79
+#define TEGRA_GPIO_PK0		80
+#define TEGRA_GPIO_PK1		81
+#define TEGRA_GPIO_PK2		82
+#define TEGRA_GPIO_PK3		83
+#define TEGRA_GPIO_PK4		84
+#define TEGRA_GPIO_PK5		85
+#define TEGRA_GPIO_PK6		86
+#define TEGRA_GPIO_PK7		87
+#define TEGRA_GPIO_PL0		88
+#define TEGRA_GPIO_PL1		89
+#define TEGRA_GPIO_PL2		90
+#define TEGRA_GPIO_PL3		91
+#define TEGRA_GPIO_PL4		92
+#define TEGRA_GPIO_PL5		93
+#define TEGRA_GPIO_PL6		94
+#define TEGRA_GPIO_PL7		95
+#define TEGRA_GPIO_PM0		96
+#define TEGRA_GPIO_PM1		97
+#define TEGRA_GPIO_PM2		98
+#define TEGRA_GPIO_PM3		99
+#define TEGRA_GPIO_PM4		100
+#define TEGRA_GPIO_PM5		101
+#define TEGRA_GPIO_PM6		102
+#define TEGRA_GPIO_PM7		103
+#define TEGRA_GPIO_PN0		104
+#define TEGRA_GPIO_PN1		105
+#define TEGRA_GPIO_PN2		106
+#define TEGRA_GPIO_PN3		107
+#define TEGRA_GPIO_PN4		108
+#define TEGRA_GPIO_PN5		109
+#define TEGRA_GPIO_PN6		110
+#define TEGRA_GPIO_PN7		111
+#define TEGRA_GPIO_PO0		112
+#define TEGRA_GPIO_PO1		113
+#define TEGRA_GPIO_PO2		114
+#define TEGRA_GPIO_PO3		115
+#define TEGRA_GPIO_PO4		116
+#define TEGRA_GPIO_PO5		117
+#define TEGRA_GPIO_PO6		118
+#define TEGRA_GPIO_PO7		119
+#define TEGRA_GPIO_PP0		120
+#define TEGRA_GPIO_PP1		121
+#define TEGRA_GPIO_PP2		122
+#define TEGRA_GPIO_PP3		123
+#define TEGRA_GPIO_PP4		124
+#define TEGRA_GPIO_PP5		125
+#define TEGRA_GPIO_PP6		126
+#define TEGRA_GPIO_PP7		127
+#define TEGRA_GPIO_PQ0		128
+#define TEGRA_GPIO_PQ1		129
+#define TEGRA_GPIO_PQ2		130
+#define TEGRA_GPIO_PQ3		131
+#define TEGRA_GPIO_PQ4		132
+#define TEGRA_GPIO_PQ5		133
+#define TEGRA_GPIO_PQ6		134
+#define TEGRA_GPIO_PQ7		135
+#define TEGRA_GPIO_PR0		136
+#define TEGRA_GPIO_PR1		137
+#define TEGRA_GPIO_PR2		138
+#define TEGRA_GPIO_PR3		139
+#define TEGRA_GPIO_PR4		140
+#define TEGRA_GPIO_PR5		141
+#define TEGRA_GPIO_PR6		142
+#define TEGRA_GPIO_PR7		143
+#define TEGRA_GPIO_PS0		144
+#define TEGRA_GPIO_PS1		145
+#define TEGRA_GPIO_PS2		146
+#define TEGRA_GPIO_PS3		147
+#define TEGRA_GPIO_PS4		148
+#define TEGRA_GPIO_PS5		149
+#define TEGRA_GPIO_PS6		150
+#define TEGRA_GPIO_PS7		151
+#define TEGRA_GPIO_PT0		152
+#define TEGRA_GPIO_PT1		153
+#define TEGRA_GPIO_PT2		154
+#define TEGRA_GPIO_PT3		155
+#define TEGRA_GPIO_PT4		156
+#define TEGRA_GPIO_PT5		157
+#define TEGRA_GPIO_PT6		158
+#define TEGRA_GPIO_PT7		159
+#define TEGRA_GPIO_PU0		160
+#define TEGRA_GPIO_PU1		161
+#define TEGRA_GPIO_PU2		162
+#define TEGRA_GPIO_PU3		163
+#define TEGRA_GPIO_PU4		164
+#define TEGRA_GPIO_PU5		165
+#define TEGRA_GPIO_PU6		166
+#define TEGRA_GPIO_PU7		167
+#define TEGRA_GPIO_PV0		168
+#define TEGRA_GPIO_PV1		169
+#define TEGRA_GPIO_PV2		170
+#define TEGRA_GPIO_PV3		171
+#define TEGRA_GPIO_PV4		172
+#define TEGRA_GPIO_PV5		173
+#define TEGRA_GPIO_PV6		174
+#define TEGRA_GPIO_PV7		175
+#define TEGRA_GPIO_PW0		176
+#define TEGRA_GPIO_PW1		177
+#define TEGRA_GPIO_PW2		178
+#define TEGRA_GPIO_PW3		179
+#define TEGRA_GPIO_PW4		180
+#define TEGRA_GPIO_PW5		181
+#define TEGRA_GPIO_PW6		182
+#define TEGRA_GPIO_PW7		183
+#define TEGRA_GPIO_PX0		184
+#define TEGRA_GPIO_PX1		185
+#define TEGRA_GPIO_PX2		186
+#define TEGRA_GPIO_PX3		187
+#define TEGRA_GPIO_PX4		188
+#define TEGRA_GPIO_PX5		189
+#define TEGRA_GPIO_PX6		190
+#define TEGRA_GPIO_PX7		191
+#define TEGRA_GPIO_PY0		192
+#define TEGRA_GPIO_PY1		193
+#define TEGRA_GPIO_PY2		194
+#define TEGRA_GPIO_PY3		195
+#define TEGRA_GPIO_PY4		196
+#define TEGRA_GPIO_PY5		197
+#define TEGRA_GPIO_PY6		198
+#define TEGRA_GPIO_PY7		199
+#define TEGRA_GPIO_PZ0		200
+#define TEGRA_GPIO_PZ1		201
+#define TEGRA_GPIO_PZ2		202
+#define TEGRA_GPIO_PZ3		203
+#define TEGRA_GPIO_PZ4		204
+#define TEGRA_GPIO_PZ5		205
+#define TEGRA_GPIO_PZ6		206
+#define TEGRA_GPIO_PZ7		207
+#define TEGRA_GPIO_PAA0		208
+#define TEGRA_GPIO_PAA1		209
+#define TEGRA_GPIO_PAA2		210
+#define TEGRA_GPIO_PAA3		211
+#define TEGRA_GPIO_PAA4		212
+#define TEGRA_GPIO_PAA5		213
+#define TEGRA_GPIO_PAA6		214
+#define TEGRA_GPIO_PAA7		215
+#define TEGRA_GPIO_PBB0		216
+#define TEGRA_GPIO_PBB1		217
+#define TEGRA_GPIO_PBB2		218
+#define TEGRA_GPIO_PBB3		219
+#define TEGRA_GPIO_PBB4		220
+#define TEGRA_GPIO_PBB5		221
+#define TEGRA_GPIO_PBB6		222
+#define TEGRA_GPIO_PBB7		223
+
+#endif
diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c
new file mode 100644
index 000000000000..0775265e69f5
--- /dev/null
+++ b/arch/arm/mach-tegra/gpio.c
@@ -0,0 +1,430 @@
+/*
+ * arch/arm/mach-tegra/gpio.c
+ *
+ * Copyright (c) 2010 Google, Inc
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/iomap.h>
+
+#define GPIO_BANK(x)		((x) >> 5)
+#define GPIO_PORT(x)		(((x) >> 3) & 0x3)
+#define GPIO_BIT(x)		((x) & 0x7)
+
+#define GPIO_REG(x)		(IO_TO_VIRT(TEGRA_GPIO_BASE) +	\
+				 GPIO_BANK(x) * 0x80 +		\
+				 GPIO_PORT(x) * 4)
+
+#define GPIO_CNF(x)		(GPIO_REG(x) + 0x00)
+#define GPIO_OE(x)		(GPIO_REG(x) + 0x10)
+#define GPIO_OUT(x)		(GPIO_REG(x) + 0X20)
+#define GPIO_IN(x)		(GPIO_REG(x) + 0x30)
+#define GPIO_INT_STA(x)		(GPIO_REG(x) + 0x40)
+#define GPIO_INT_ENB(x)		(GPIO_REG(x) + 0x50)
+#define GPIO_INT_LVL(x)		(GPIO_REG(x) + 0x60)
+#define GPIO_INT_CLR(x)		(GPIO_REG(x) + 0x70)
+
+#define GPIO_MSK_CNF(x)		(GPIO_REG(x) + 0x800)
+#define GPIO_MSK_OE(x)		(GPIO_REG(x) + 0x810)
+#define GPIO_MSK_OUT(x)		(GPIO_REG(x) + 0X820)
+#define GPIO_MSK_INT_STA(x)	(GPIO_REG(x) + 0x840)
+#define GPIO_MSK_INT_ENB(x)	(GPIO_REG(x) + 0x850)
+#define GPIO_MSK_INT_LVL(x)	(GPIO_REG(x) + 0x860)
+
+#define GPIO_INT_LVL_MASK		0x010101
+#define GPIO_INT_LVL_EDGE_RISING	0x000101
+#define GPIO_INT_LVL_EDGE_FALLING	0x000100
+#define GPIO_INT_LVL_EDGE_BOTH		0x010100
+#define GPIO_INT_LVL_LEVEL_HIGH		0x000001
+#define GPIO_INT_LVL_LEVEL_LOW		0x000000
+
+struct tegra_gpio_bank {
+	int bank;
+	int irq;
+	spinlock_t lvl_lock[4];
+#ifdef CONFIG_PM
+	u32 cnf[4];
+	u32 out[4];
+	u32 oe[4];
+	u32 int_enb[4];
+	u32 int_lvl[4];
+#endif
+};
+
+
+static struct tegra_gpio_bank tegra_gpio_banks[] = {
+	{.bank = 0, .irq = INT_GPIO1},
+	{.bank = 1, .irq = INT_GPIO2},
+	{.bank = 2, .irq = INT_GPIO3},
+	{.bank = 3, .irq = INT_GPIO4},
+	{.bank = 4, .irq = INT_GPIO5},
+	{.bank = 5, .irq = INT_GPIO6},
+	{.bank = 6, .irq = INT_GPIO7},
+};
+
+static int tegra_gpio_compose(int bank, int port, int bit)
+{
+	return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7);
+}
+
+static void tegra_gpio_mask_write(u32 reg, int gpio, int value)
+{
+	u32 val;
+
+	val = 0x100 << GPIO_BIT(gpio);
+	if (value)
+		val |= 1 << GPIO_BIT(gpio);
+	__raw_writel(val, reg);
+}
+
+void tegra_gpio_enable(int gpio)
+{
+	tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1);
+}
+
+void tegra_gpio_disable(int gpio)
+{
+	tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0);
+}
+
+static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	tegra_gpio_mask_write(GPIO_MSK_OUT(offset), offset, value);
+}
+
+static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
+}
+
+static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 0);
+	return 0;
+}
+
+static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+					int value)
+{
+	tegra_gpio_set(chip, offset, value);
+	tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 1);
+	return 0;
+}
+
+
+
+static struct gpio_chip tegra_gpio_chip = {
+	.label			= "tegra-gpio",
+	.direction_input	= tegra_gpio_direction_input,
+	.get			= tegra_gpio_get,
+	.direction_output	= tegra_gpio_direction_output,
+	.set			= tegra_gpio_set,
+	.base			= 0,
+	.ngpio			= TEGRA_NR_GPIOS,
+};
+
+static void tegra_gpio_irq_ack(unsigned int irq)
+{
+	int gpio = irq - INT_GPIO_BASE;
+
+	__raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
+}
+
+static void tegra_gpio_irq_mask(unsigned int irq)
+{
+	int gpio = irq - INT_GPIO_BASE;
+
+	tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0);
+}
+
+static void tegra_gpio_irq_unmask(unsigned int irq)
+{
+	int gpio = irq - INT_GPIO_BASE;
+
+	tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1);
+}
+
+static int tegra_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+	int gpio = irq - INT_GPIO_BASE;
+	struct tegra_gpio_bank *bank = get_irq_chip_data(irq);
+	int port = GPIO_PORT(gpio);
+	int lvl_type;
+	int val;
+	unsigned long flags;
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		lvl_type = GPIO_INT_LVL_EDGE_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		lvl_type = GPIO_INT_LVL_EDGE_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		lvl_type = GPIO_INT_LVL_EDGE_BOTH;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		lvl_type = GPIO_INT_LVL_LEVEL_HIGH;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		lvl_type = GPIO_INT_LVL_LEVEL_LOW;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&bank->lvl_lock[port], flags);
+
+	val = __raw_readl(GPIO_INT_LVL(gpio));
+	val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio));
+	val |= lvl_type << GPIO_BIT(gpio);
+	__raw_writel(val, GPIO_INT_LVL(gpio));
+
+	spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
+
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		__set_irq_handler_unlocked(irq, handle_level_irq);
+	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		__set_irq_handler_unlocked(irq, handle_edge_irq);
+
+	return 0;
+}
+
+static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct tegra_gpio_bank *bank;
+	int port;
+	int pin;
+	int unmasked = 0;
+
+	desc->chip->ack(irq);
+
+	bank = get_irq_data(irq);
+
+	for (port = 0; port < 4; port++) {
+		int gpio = tegra_gpio_compose(bank->bank, port, 0);
+		unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) &
+			__raw_readl(GPIO_INT_ENB(gpio));
+		u32 lvl = __raw_readl(GPIO_INT_LVL(gpio));
+
+		for_each_set_bit(pin, &sta, 8) {
+			__raw_writel(1 << pin, GPIO_INT_CLR(gpio));
+
+			/* if gpio is edge triggered, clear condition
+			 * before executing the hander so that we don't
+			 * miss edges
+			 */
+			if (lvl & (0x100 << pin)) {
+				unmasked = 1;
+				desc->chip->unmask(irq);
+			}
+
+			generic_handle_irq(gpio_to_irq(gpio + pin));
+		}
+	}
+
+	if (!unmasked)
+		desc->chip->unmask(irq);
+
+}
+
+#ifdef CONFIG_PM
+void tegra_gpio_resume(void)
+{
+	unsigned long flags;
+	int b, p, i;
+
+	local_irq_save(flags);
+
+	for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
+		struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
+
+		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
+			unsigned int gpio = (b<<5) | (p<<3);
+			__raw_writel(bank->cnf[p], GPIO_CNF(gpio));
+			__raw_writel(bank->out[p], GPIO_OUT(gpio));
+			__raw_writel(bank->oe[p], GPIO_OE(gpio));
+			__raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
+			__raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
+		}
+	}
+
+	local_irq_restore(flags);
+
+	for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
+		struct irq_desc *desc = irq_to_desc(i);
+		if (!desc || (desc->status & IRQ_WAKEUP))
+			continue;
+		enable_irq(i);
+	}
+}
+
+void tegra_gpio_suspend(void)
+{
+	unsigned long flags;
+	int b, p, i;
+
+	for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
+		struct irq_desc *desc = irq_to_desc(i);
+		if (!desc)
+			continue;
+		if (desc->status & IRQ_WAKEUP) {
+			int gpio = i - INT_GPIO_BASE;
+			pr_debug("gpio %d.%d is wakeup\n", gpio/8, gpio&7);
+			continue;
+		}
+		disable_irq(i);
+	}
+
+	local_irq_save(flags);
+	for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
+		struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
+
+		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
+			unsigned int gpio = (b<<5) | (p<<3);
+			bank->cnf[p] = __raw_readl(GPIO_CNF(gpio));
+			bank->out[p] = __raw_readl(GPIO_OUT(gpio));
+			bank->oe[p] = __raw_readl(GPIO_OE(gpio));
+			bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio));
+			bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio));
+		}
+	}
+	local_irq_restore(flags);
+}
+
+static int tegra_gpio_wake_enable(unsigned int irq, unsigned int enable)
+{
+	struct tegra_gpio_bank *bank = get_irq_chip_data(irq);
+	return set_irq_wake(bank->irq, enable);
+}
+#endif
+
+static struct irq_chip tegra_gpio_irq_chip = {
+	.name		= "GPIO",
+	.ack		= tegra_gpio_irq_ack,
+	.mask		= tegra_gpio_irq_mask,
+	.unmask		= tegra_gpio_irq_unmask,
+	.set_type	= tegra_gpio_irq_set_type,
+#ifdef CONFIG_PM
+	.set_wake	= tegra_gpio_wake_enable,
+#endif
+};
+
+
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
+static int __init tegra_gpio_init(void)
+{
+	struct tegra_gpio_bank *bank;
+	int i;
+	int j;
+
+	for (i = 0; i < 7; i++) {
+		for (j = 0; j < 4; j++) {
+			int gpio = tegra_gpio_compose(i, j, 0);
+			__raw_writel(0x00, GPIO_INT_ENB(gpio));
+		}
+	}
+
+	gpiochip_add(&tegra_gpio_chip);
+
+	for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
+		bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))];
+
+		lockdep_set_class(&irq_desc[i].lock, &gpio_lock_class);
+		set_irq_chip_data(i, bank);
+		set_irq_chip(i, &tegra_gpio_irq_chip);
+		set_irq_handler(i, handle_simple_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+		bank = &tegra_gpio_banks[i];
+
+		set_irq_chained_handler(bank->irq, tegra_gpio_irq_handler);
+		set_irq_data(bank->irq, bank);
+
+		for (j = 0; j < 4; j++)
+			spin_lock_init(&bank->lvl_lock[j]);
+	}
+
+	return 0;
+}
+
+postcore_initcall(tegra_gpio_init);
+
+#ifdef	CONFIG_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static int dbg_gpio_show(struct seq_file *s, void *unused)
+{
+	int i;
+	int j;
+
+	for (i = 0; i < 7; i++) {
+		for (j = 0; j < 4; j++) {
+			int gpio = tegra_gpio_compose(i, j, 0);
+			seq_printf(s,
+				"%d:%d %02x %02x %02x %02x %02x %02x %06x\n",
+				i, j,
+				__raw_readl(GPIO_CNF(gpio)),
+				__raw_readl(GPIO_OE(gpio)),
+				__raw_readl(GPIO_OUT(gpio)),
+				__raw_readl(GPIO_IN(gpio)),
+				__raw_readl(GPIO_INT_STA(gpio)),
+				__raw_readl(GPIO_INT_ENB(gpio)),
+				__raw_readl(GPIO_INT_LVL(gpio)));
+		}
+	}
+	return 0;
+}
+
+static int dbg_gpio_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dbg_gpio_show, &inode->i_private);
+}
+
+static const struct file_operations debug_fops = {
+	.open		= dbg_gpio_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init tegra_gpio_debuginit(void)
+{
+	(void) debugfs_create_file("tegra_gpio", S_IRUGO,
+					NULL, NULL, &debug_fops);
+	return 0;
+}
+late_initcall(tegra_gpio_debuginit);
+#endif
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
new file mode 100644
index 000000000000..b5349b2f13d2
--- /dev/null
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -0,0 +1,61 @@
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+        .section ".text.head", "ax"
+	__CPUINIT
+
+/*
+ * Tegra specific entry point for secondary CPUs.
+ *   The secondary kernel init calls v7_flush_dcache_all before it enables
+ *   the L1; however, the L1 comes out of reset in an undefined state, so
+ *   the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ *   of cache lines with uninitialized data and uninitialized tags to get
+ *   written out to memory, which does really unpleasant things to the main
+ *   processor.  We fix this by performing an invalidate, rather than a
+ *   clean + invalidate, before jumping into the kernel.
+ */
+ENTRY(v7_invalidate_l1)
+        mov     r0, #0
+        mcr     p15, 2, r0, c0, c0, 0
+        mrc     p15, 1, r0, c0, c0, 0
+
+        ldr     r1, =0x7fff
+        and     r2, r1, r0, lsr #13
+
+        ldr     r1, =0x3ff
+
+        and     r3, r1, r0, lsr #3  @ NumWays - 1
+        add     r2, r2, #1          @ NumSets
+
+        and     r0, r0, #0x7
+        add     r0, r0, #4          @ SetShift
+
+        clz     r1, r3              @ WayShift
+        add     r4, r3, #1          @ NumWays
+1:      sub     r2, r2, #1          @ NumSets--
+        mov     r3, r4              @ Temp = NumWays
+2:      subs    r3, r3, #1          @ Temp--
+        mov     r5, r3, lsl r1
+        mov     r6, r2, lsl r0
+        orr     r5, r5, r6          @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+        mcr     p15, 0, r5, c7, c6, 2
+        bgt     2b
+        cmp     r2, #0
+        bgt     1b
+        dsb
+        isb
+        mov     pc, lr
+ENDPROC(v7_invalidate_l1)
+
+ENTRY(tegra_secondary_startup)
+	msr	cpsr_fsxc, #0xd3
+        bl      v7_invalidate_l1
+	mrc	p15, 0, r0, c0, c0, 5
+        and	r0, r0, #15
+        ldr     r1, =0x6000f100
+        str     r0, [r1]
+1:      ldr     r2, [r1]
+        cmp     r0, r2
+        beq     1b
+        b       secondary_startup
+ENDPROC(tegra_secondary_startup)
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
new file mode 100644
index 000000000000..8e7f115aa21e
--- /dev/null
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -0,0 +1,140 @@
+/*
+ *  linux/arch/arm/mach-realview/hotplug.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+#include <asm/cacheflush.h>
+
+static DECLARE_COMPLETION(cpu_killed);
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, #0x04\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+	"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, #0x04\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  :
+	  : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+	/*
+	 * there is no power-control hardware on this platform, so all
+	 * we can do is put the core into WFI; this is safe as the calling
+	 * code will have already disabled interrupts
+	 */
+	for (;;) {
+		/*
+		 * here's the WFI
+		 */
+		asm(".word	0xe320f003\n"
+		    :
+		    :
+		    : "memory", "cc");
+
+		/*if (pen_release == cpu) {*/
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		/*}*/
+
+		/*
+		 * getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * The trouble is, letting people know about this is not really
+		 * possible, since we are currently running incoherently, and
+		 * therefore cannot safely call printk() or anything else
+		 */
+#ifdef DEBUG
+		printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu);
+#endif
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+#ifdef DEBUG
+	unsigned int this_cpu = hard_smp_processor_id();
+
+	if (cpu != this_cpu) {
+		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
+			   this_cpu, cpu);
+		BUG();
+	}
+#endif
+
+	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+	complete(&cpu_killed);
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h
new file mode 100644
index 000000000000..cc115174899b
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/barriers.h
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-realview/include/mach/barriers.h
+ *
+ * Copyright (C) 2010 ARM Ltd.
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_BARRIERS_H
+#define __MACH_BARRIERS_H
+
+#include <asm/outercache.h>
+
+#define rmb()		dmb()
+#define wmb()		do { dsb(); outer_sync(); } while (0)
+#define mb()		wmb()
+
+#endif	/* __MACH_BARRIERS_H */
diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h
new file mode 100644
index 000000000000..d7723955dac7
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/clk.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-tegra/include/mach/clk.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_CLK_H
+#define __MACH_CLK_H
+
+void tegra_periph_reset_deassert(struct clk *c);
+void tegra_periph_reset_assert(struct clk *c);
+
+int clk_enable_cansleep(struct clk *clk);
+void clk_disable_cansleep(struct clk *clk);
+int clk_set_rate_cansleep(struct clk *clk, unsigned long rate);
+int clk_set_parent_cansleep(struct clk *clk, struct clk *parent);
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/clkdev.h b/arch/arm/mach-tegra/include/mach/clkdev.h
new file mode 100644
index 000000000000..412f5c63e65a
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/clkdev.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-tegra/include/mach/clkdev.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
new file mode 100644
index 000000000000..8ea3bffb4e00
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-tegra/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/io.h>
+
+	.macro  addruart, rp, rv
+        ldreq   \rp, =IO_APB_PHYS       @ physical
+        ldrne   \rv, =IO_APB_VIRT        @ virtual
+#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
+#error "A debug UART must be selected in the kernel config to use DEBUG_LL"
+#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
+        orr     \rp, \rp, #0x6000
+        orr     \rv, \rv, #0x6000
+#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
+        orr     \rp, \rp, #0x6000
+	orr	\rp, \rp, #0x40
+        orr     \rv, \rv, #0x6000
+	orr	\rv, \rv, #0x40
+#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
+        orr     \rp, \rp, #0x6200
+        orr     \rv, \rv, #0x6200
+#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
+        orr     \rp, \rp, #0x6300
+        orr     \rv, \rv, #0x6300
+#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
+        orr     \rp, \rp, #0x6400
+        orr     \rv, \rv, #0x6400
+#endif
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
+
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h
new file mode 100644
index 000000000000..39011bd9a925
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/dma.h
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-tegra/include/mach/dma.h
+ *
+ * Copyright (c) 2008-2009, NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef __MACH_TEGRA_DMA_H
+#define __MACH_TEGRA_DMA_H
+
+#include <linux/list.h>
+
+#if defined(CONFIG_TEGRA_SYSTEM_DMA)
+
+struct tegra_dma_req;
+struct tegra_dma_channel;
+
+#define TEGRA_DMA_REQ_SEL_CNTR			0
+#define TEGRA_DMA_REQ_SEL_I2S_2			1
+#define TEGRA_DMA_REQ_SEL_I2S_1			2
+#define TEGRA_DMA_REQ_SEL_SPD_I			3
+#define TEGRA_DMA_REQ_SEL_UI_I			4
+#define TEGRA_DMA_REQ_SEL_MIPI			5
+#define TEGRA_DMA_REQ_SEL_I2S2_2		6
+#define TEGRA_DMA_REQ_SEL_I2S2_1		7
+#define TEGRA_DMA_REQ_SEL_UARTA			8
+#define TEGRA_DMA_REQ_SEL_UARTB			9
+#define TEGRA_DMA_REQ_SEL_UARTC			10
+#define TEGRA_DMA_REQ_SEL_SPI			11
+#define TEGRA_DMA_REQ_SEL_AC97			12
+#define TEGRA_DMA_REQ_SEL_ACMODEM		13
+#define TEGRA_DMA_REQ_SEL_SL4B			14
+#define TEGRA_DMA_REQ_SEL_SL2B1			15
+#define TEGRA_DMA_REQ_SEL_SL2B2			16
+#define TEGRA_DMA_REQ_SEL_SL2B3			17
+#define TEGRA_DMA_REQ_SEL_SL2B4			18
+#define TEGRA_DMA_REQ_SEL_UARTD			19
+#define TEGRA_DMA_REQ_SEL_UARTE			20
+#define TEGRA_DMA_REQ_SEL_I2C			21
+#define TEGRA_DMA_REQ_SEL_I2C2			22
+#define TEGRA_DMA_REQ_SEL_I2C3			23
+#define TEGRA_DMA_REQ_SEL_DVC_I2C		24
+#define TEGRA_DMA_REQ_SEL_OWR			25
+#define TEGRA_DMA_REQ_SEL_INVALID		31
+
+enum tegra_dma_mode {
+	TEGRA_DMA_SHARED = 1,
+	TEGRA_DMA_MODE_CONTINOUS = 2,
+	TEGRA_DMA_MODE_ONESHOT = 4,
+};
+
+enum tegra_dma_req_error {
+	TEGRA_DMA_REQ_SUCCESS = 0,
+	TEGRA_DMA_REQ_ERROR_ABORTED,
+	TEGRA_DMA_REQ_INFLIGHT,
+};
+
+enum tegra_dma_req_buff_status {
+	TEGRA_DMA_REQ_BUF_STATUS_EMPTY = 0,
+	TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL,
+	TEGRA_DMA_REQ_BUF_STATUS_FULL,
+};
+
+struct tegra_dma_req {
+	struct list_head node;
+	unsigned int modid;
+	int instance;
+
+	/* Called when the req is complete and from the DMA ISR context.
+	 * When this is called the req structure is no longer queued by
+	 * the DMA channel.
+	 *
+	 * State of the DMA depends on the number of req it has. If there are
+	 * no DMA requests queued up, then it will STOP the DMA. It there are
+	 * more requests in the DMA, then it will queue the next request.
+	 */
+	void (*complete)(struct tegra_dma_req *req);
+
+	/*  This is a called from the DMA ISR context when the DMA is still in
+	 *  progress and is actively filling same buffer.
+	 *
+	 *  In case of continous mode receive, this threshold is 1/2 the buffer
+	 *  size. In other cases, this will not even be called as there is no
+	 *  hardware support for it.
+	 *
+	 * In the case of continous mode receive, if there is next req already
+	 * queued, DMA programs the HW to use that req when this req is
+	 * completed. If there is no "next req" queued, then DMA ISR doesn't do
+	 * anything before calling this callback.
+	 *
+	 *	This is mainly used by the cases, where the clients has queued
+	 *	only one req and want to get some sort of DMA threshold
+	 *	callback to program the next buffer.
+	 *
+	 */
+	void (*threshold)(struct tegra_dma_req *req);
+
+	/* 1 to copy to memory.
+	 * 0 to copy from the memory to device FIFO */
+	int to_memory;
+
+	void *virt_addr;
+
+	unsigned long source_addr;
+	unsigned long dest_addr;
+	unsigned long dest_wrap;
+	unsigned long source_wrap;
+	unsigned long source_bus_width;
+	unsigned long dest_bus_width;
+	unsigned long req_sel;
+	unsigned int size;
+
+	/* Updated by the DMA driver on the conpletion of the request. */
+	int bytes_transferred;
+	int status;
+
+	/* DMA completion tracking information */
+	int buffer_status;
+
+	/* Client specific data */
+	void *dev;
+};
+
+int tegra_dma_enqueue_req(struct tegra_dma_channel *ch,
+	struct tegra_dma_req *req);
+int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
+	struct tegra_dma_req *req);
+void tegra_dma_dequeue(struct tegra_dma_channel *ch);
+void tegra_dma_flush(struct tegra_dma_channel *ch);
+
+bool tegra_dma_is_req_inflight(struct tegra_dma_channel *ch,
+	struct tegra_dma_req *req);
+bool tegra_dma_is_empty(struct tegra_dma_channel *ch);
+
+struct tegra_dma_channel *tegra_dma_allocate_channel(int mode);
+void tegra_dma_free_channel(struct tegra_dma_channel *ch);
+
+int __init tegra_dma_init(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S
new file mode 100644
index 000000000000..2ba9e5c9d2f6
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/entry-macro.S
@@ -0,0 +1,118 @@
+/* arch/arm/mach-tegra/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2009 Palm, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <mach/iomap.h>
+#include <mach/io.h>
+
+#if defined(CONFIG_ARM_GIC)
+
+#include <asm/hardware/gic.h>
+
+	/* Uses the GIC interrupt controller built into the cpu */
+#define ICTRL_BASE (IO_CPU_VIRT + 0x100)
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	movw \base, #(ICTRL_BASE & 0x0000ffff)
+	movt \base, #((ICTRL_BASE & 0xffff0000) >> 16)
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	/*
+	 * The interrupt numbering scheme is defined in the
+	 * interrupt controller spec.  To wit:
+	 *
+	 * Interrupts 0-15 are IPI
+	 * 16-28 are reserved
+	 * 29-31 are local.  We allow 30 to be used for the watchdog.
+	 * 32-1020 are global
+	 * 1021-1022 are reserved
+	 * 1023 is "spurious" (no interrupt)
+	 *
+	 * For now, we ignore all local interrupts so only return an interrupt
+	 * if it's between 30 and 1020.  The test_for_ipi routine below will
+	 * pick up on IPIs.
+	 *
+	 * A simple read from the controller will tell us the number of the
+	 * highest priority enabled interrupt.  We then just need to check
+	 * whether it is in the valid range for an IRQ (30-1020 inclusive).
+	 */
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	/* bits 12-10 = src CPU, 9-0 = int # */
+	ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+	ldr		\tmp, =1021
+
+	bic     \irqnr, \irqstat, #0x1c00
+
+	cmp     \irqnr, #29
+	cmpcc	\irqnr, \irqnr
+	cmpne	\irqnr, \tmp
+	cmpcs	\irqnr, \irqnr
+
+	.endm
+
+	/* We assume that irqstat (the raw value of the IRQ acknowledge
+	 * register) is preserved from the macro above.
+	 * If there is an IPI, we immediately signal end of interrupt on the
+	 * controller, since this requires the original irqstat value which
+	 * we won't easily be able to recreate later.
+	 */
+
+	.macro test_for_ipi, irqnr, irqstat, base, tmp
+	bic	\irqnr, \irqstat, #0x1c00
+	cmp	\irqnr, #16
+	strcc	\irqstat, [\base, #GIC_CPU_EOI]
+	cmpcs	\irqnr, \irqnr
+	.endm
+
+	/* As above, this assumes that irqstat and base are preserved.. */
+
+	.macro test_for_ltirq, irqnr, irqstat, base, tmp
+	bic	\irqnr, \irqstat, #0x1c00
+	mov 	\tmp, #0
+	cmp	\irqnr, #29
+	moveq	\tmp, #1
+	streq	\irqstat, [\base, #GIC_CPU_EOI]
+	cmp	\tmp, #0
+	.endm
+
+#else
+	/* legacy interrupt controller for AP16 */
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	@ enable imprecise aborts
+	cpsie	a
+	@ EVP base at 0xf010f000
+	mov \base, #0xf0000000
+	orr \base, #0x00100000
+	orr \base, #0x0000f000
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr \irqnr, [\base, #0x20]	@ EVT_IRQ_STS
+	cmp \irqnr, #0x80
+	.endm
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h
new file mode 100644
index 000000000000..e31f486d69a2
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/gpio.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-tegra/include/mach/gpio.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_GPIO_H
+#define __MACH_TEGRA_GPIO_H
+
+#include <mach/irqs.h>
+
+#define TEGRA_NR_GPIOS		INT_GPIO_NR
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value		__gpio_get_value
+#define gpio_set_value		__gpio_set_value
+#define gpio_cansleep		__gpio_cansleep
+
+#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
+#define TEGRA_IRQ_TO_GPIO(irq) ((gpio) - INT_GPIO_BASE)
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	if (gpio < TEGRA_NR_GPIOS)
+		return INT_GPIO_BASE + gpio;
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	if ((irq >= INT_GPIO_BASE) && (irq < INT_GPIO_BASE + INT_GPIO_NR))
+		return irq - INT_GPIO_BASE;
+	return -EINVAL;
+}
+
+void tegra_gpio_enable(int gpio);
+void tegra_gpio_disable(int gpio);
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/hardware.h b/arch/arm/mach-tegra/include/mach/hardware.h
new file mode 100644
index 000000000000..56e43b3a5b97
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/hardware.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-tegra/include/mach/hardware.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_HARDWARE_H
+#define __MACH_TEGRA_HARDWARE_H
+
+#define PCIBIOS_MIN_IO			0x1000
+#define PCIBIOS_MIN_MEM			0
+#define pcibios_assign_all_busses()	1
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h
new file mode 100644
index 000000000000..f0981b1ac59e
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/io.h
@@ -0,0 +1,95 @@
+/*
+ * arch/arm/mach-tegra/include/mach/io.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_IO_H
+#define __MACH_TEGRA_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+/* On TEGRA, many peripherals are very closely packed in
+ * two 256MB io windows (that actually only use about 64KB
+ * at the start of each).
+ *
+ * We will just map the first 1MB of each window (to minimize
+ * pt entries needed) and provide a macro to transform physical
+ * io addresses to an appropriate void __iomem *.
+ *
+ */
+
+#define IO_IRAM_PHYS	0x40000000
+#define IO_IRAM_VIRT	0xFE400000
+#define IO_IRAM_SIZE	SZ_256K
+
+#define IO_CPU_PHYS     0x50040000
+#define IO_CPU_VIRT     0xFE000000
+#define IO_CPU_SIZE	SZ_16K
+
+#define IO_PPSB_PHYS	0x60000000
+#define IO_PPSB_VIRT	0xFE200000
+#define IO_PPSB_SIZE	SZ_1M
+
+#define IO_APB_PHYS	0x70000000
+#define IO_APB_VIRT	0xFE300000
+#define IO_APB_SIZE	SZ_1M
+
+#define IO_TO_VIRT_BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
+#define IO_TO_VIRT_XLATE(p, pst, vst)	(((p) - (pst) + (vst)))
+
+#define IO_TO_VIRT(n) ( \
+	IO_TO_VIRT_BETWEEN((n), IO_PPSB_PHYS, IO_PPSB_SIZE) ?		\
+		IO_TO_VIRT_XLATE((n), IO_PPSB_PHYS, IO_PPSB_VIRT) :	\
+	IO_TO_VIRT_BETWEEN((n), IO_APB_PHYS, IO_APB_SIZE) ?		\
+		IO_TO_VIRT_XLATE((n), IO_APB_PHYS, IO_APB_VIRT) :	\
+	IO_TO_VIRT_BETWEEN((n), IO_CPU_PHYS, IO_CPU_SIZE) ?		\
+		IO_TO_VIRT_XLATE((n), IO_CPU_PHYS, IO_CPU_VIRT) :	\
+	IO_TO_VIRT_BETWEEN((n), IO_IRAM_PHYS, IO_IRAM_SIZE) ?		\
+		IO_TO_VIRT_XLATE((n), IO_IRAM_PHYS, IO_IRAM_VIRT) :	\
+	0)
+
+#ifndef __ASSEMBLER__
+
+#define __arch_ioremap(p, s, t)	tegra_ioremap(p, s, t)
+#define __arch_iounmap(v)	tegra_iounmap(v)
+
+void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type);
+void tegra_iounmap(volatile void __iomem *addr);
+
+#define IO_ADDRESS(n) ((void __iomem *) IO_TO_VIRT(n))
+
+#ifdef CONFIG_TEGRA_PCI
+extern void __iomem *tegra_pcie_io_base;
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return tegra_pcie_io_base + (addr & IO_SPACE_LIMIT);
+}
+#else
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#endif
+
+#define __io(a)         __io(a)
+#define __mem_pci(a)    (a)
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h
new file mode 100644
index 000000000000..44a4f4bcf91f
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/iomap.h
@@ -0,0 +1,224 @@
+/*
+ * arch/arm/mach-tegra/include/mach/iomap.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_IOMAP_H
+#define __MACH_TEGRA_IOMAP_H
+
+#include <asm/sizes.h>
+
+#define TEGRA_IRAM_BASE			0x40000000
+#define TEGRA_IRAM_SIZE			SZ_256K
+
+#define TEGRA_ARM_PERIF_BASE		0x50040000
+#define TEGRA_ARM_PERIF_SIZE		SZ_8K
+
+#define TEGRA_ARM_PL310_BASE		0x50043000
+#define TEGRA_ARM_PL310_SIZE		SZ_4K
+
+#define TEGRA_ARM_INT_DIST_BASE		0x50041000
+#define TEGRA_ARM_INT_DIST_SIZE		SZ_4K
+
+#define TEGRA_DISPLAY_BASE		0x54200000
+#define TEGRA_DISPLAY_SIZE		SZ_256K
+
+#define TEGRA_DISPLAY2_BASE		0x54240000
+#define TEGRA_DISPLAY2_SIZE		SZ_256K
+
+#define TEGRA_PRIMARY_ICTLR_BASE	0x60004000
+#define TEGRA_PRIMARY_ICTLR_SIZE	SZ_64
+
+#define TEGRA_SECONDARY_ICTLR_BASE	0x60004100
+#define TEGRA_SECONDARY_ICTLR_SIZE	SZ_64
+
+#define TEGRA_TERTIARY_ICTLR_BASE	0x60004200
+#define TEGRA_TERTIARY_ICTLR_SIZE	SZ_64
+
+#define TEGRA_QUATERNARY_ICTLR_BASE	0x60004300
+#define TEGRA_QUATERNARY_ICTLR_SIZE	SZ_64
+
+#define TEGRA_TMR1_BASE			0x60005000
+#define TEGRA_TMR1_SIZE			SZ_8
+
+#define TEGRA_TMR2_BASE			0x60005008
+#define TEGRA_TMR2_SIZE			SZ_8
+
+#define TEGRA_TMRUS_BASE		0x60005010
+#define TEGRA_TMRUS_SIZE		SZ_64
+
+#define TEGRA_TMR3_BASE			0x60005050
+#define TEGRA_TMR3_SIZE			SZ_8
+
+#define TEGRA_TMR4_BASE			0x60005058
+#define TEGRA_TMR4_SIZE			SZ_8
+
+#define TEGRA_CLK_RESET_BASE		0x60006000
+#define TEGRA_CLK_RESET_SIZE		SZ_4K
+
+#define TEGRA_FLOW_CTRL_BASE		0x60007000
+#define TEGRA_FLOW_CTRL_SIZE		20
+
+#define TEGRA_AHB_DMA_BASE		0x60008000
+#define TEGRA_AHB_DMA_SIZE		SZ_4K
+
+#define TEGRA_AHB_DMA_CH0_BASE		0x60009000
+#define TEGRA_AHB_DMA_CH0_SIZE		32
+
+#define TEGRA_APB_DMA_BASE		0x6000A000
+#define TEGRA_APB_DMA_SIZE		SZ_4K
+
+#define TEGRA_APB_DMA_CH0_BASE		0x6000B000
+#define TEGRA_APB_DMA_CH0_SIZE		32
+
+#define TEGRA_AHB_GIZMO_BASE		0x6000C004
+#define TEGRA_AHB_GIZMO_SIZE		0x10C
+
+#define TEGRA_STATMON_BASE		0x6000C400
+#define TEGRA_STATMON_SIZE		SZ_1K
+
+#define TEGRA_GPIO_BASE			0x6000D000
+#define TEGRA_GPIO_SIZE			SZ_4K
+
+#define TEGRA_EXCEPTION_VECTORS_BASE    0x6000F000
+#define TEGRA_EXCEPTION_VECTORS_SIZE    SZ_4K
+
+#define TEGRA_APB_MISC_BASE		0x70000000
+#define TEGRA_APB_MISC_SIZE		SZ_4K
+
+#define TEGRA_AC97_BASE			0x70002000
+#define TEGRA_AC97_SIZE			SZ_512
+
+#define TEGRA_SPDIF_BASE		0x70002400
+#define TEGRA_SPDIF_SIZE		SZ_512
+
+#define TEGRA_I2S1_BASE			0x70002800
+#define TEGRA_I2S1_SIZE			SZ_256
+
+#define TEGRA_I2S2_BASE			0x70002A00
+#define TEGRA_I2S2_SIZE			SZ_256
+
+#define TEGRA_UARTA_BASE		0x70006000
+#define TEGRA_UARTA_SIZE		SZ_64
+
+#define TEGRA_UARTB_BASE		0x70006040
+#define TEGRA_UARTB_SIZE		SZ_64
+
+#define TEGRA_UARTC_BASE		0x70006200
+#define TEGRA_UARTC_SIZE		SZ_256
+
+#define TEGRA_UARTD_BASE		0x70006300
+#define TEGRA_UARTD_SIZE		SZ_256
+
+#define TEGRA_UARTE_BASE		0x70006400
+#define TEGRA_UARTE_SIZE		SZ_256
+
+#define TEGRA_NAND_BASE			0x70008000
+#define TEGRA_NAND_SIZE			SZ_256
+
+#define TEGRA_HSMMC_BASE		0x70008500
+#define TEGRA_HSMMC_SIZE		SZ_256
+
+#define TEGRA_SNOR_BASE			0x70009000
+#define TEGRA_SNOR_SIZE			SZ_4K
+
+#define TEGRA_PWFM_BASE			0x7000A000
+#define TEGRA_PWFM_SIZE			SZ_256
+
+#define TEGRA_MIPI_BASE			0x7000B000
+#define TEGRA_MIPI_SIZE			SZ_256
+
+#define TEGRA_I2C_BASE			0x7000C000
+#define TEGRA_I2C_SIZE			SZ_256
+
+#define TEGRA_TWC_BASE			0x7000C100
+#define TEGRA_TWC_SIZE			SZ_256
+
+#define TEGRA_SPI_BASE			0x7000C380
+#define TEGRA_SPI_SIZE			48
+
+#define TEGRA_I2C2_BASE			0x7000C400
+#define TEGRA_I2C2_SIZE			SZ_256
+
+#define TEGRA_I2C3_BASE			0x7000C500
+#define TEGRA_I2C3_SIZE			SZ_256
+
+#define TEGRA_OWR_BASE			0x7000C600
+#define TEGRA_OWR_SIZE			80
+
+#define TEGRA_DVC_BASE			0x7000D000
+#define TEGRA_DVC_SIZE			SZ_512
+
+#define TEGRA_SPI1_BASE			0x7000D400
+#define TEGRA_SPI1_SIZE			SZ_512
+
+#define TEGRA_SPI2_BASE			0x7000D600
+#define TEGRA_SPI2_SIZE			SZ_512
+
+#define TEGRA_SPI3_BASE			0x7000D800
+#define TEGRA_SPI3_SIZE			SZ_512
+
+#define TEGRA_SPI4_BASE			0x7000DA00
+#define TEGRA_SPI4_SIZE			SZ_512
+
+#define TEGRA_RTC_BASE			0x7000E000
+#define TEGRA_RTC_SIZE			SZ_256
+
+#define TEGRA_KBC_BASE			0x7000E200
+#define TEGRA_KBC_SIZE			SZ_256
+
+#define TEGRA_PMC_BASE			0x7000E400
+#define TEGRA_PMC_SIZE			SZ_256
+
+#define TEGRA_MC_BASE			0x7000F000
+#define TEGRA_MC_SIZE			SZ_1K
+
+#define TEGRA_EMC_BASE			0x7000F400
+#define TEGRA_EMC_SIZE			SZ_1K
+
+#define TEGRA_FUSE_BASE			0x7000F800
+#define TEGRA_FUSE_SIZE			SZ_1K
+
+#define TEGRA_KFUSE_BASE		0x7000FC00
+#define TEGRA_KFUSE_SIZE		SZ_1K
+
+#define TEGRA_CSITE_BASE		0x70040000
+#define TEGRA_CSITE_SIZE		SZ_256K
+
+#define TEGRA_USB_BASE			0xC5000000
+#define TEGRA_USB_SIZE			SZ_16K
+
+#define TEGRA_USB2_BASE			0xC5004000
+#define TEGRA_USB2_SIZE			SZ_16K
+
+#define TEGRA_USB3_BASE			0xC5008000
+#define TEGRA_USB3_SIZE			SZ_16K
+
+#define TEGRA_SDMMC1_BASE		0xC8000000
+#define TEGRA_SDMMC1_SIZE		SZ_512
+
+#define TEGRA_SDMMC2_BASE		0xC8000200
+#define TEGRA_SDMMC2_SIZE		SZ_512
+
+#define TEGRA_SDMMC3_BASE		0xC8000400
+#define TEGRA_SDMMC3_SIZE		SZ_512
+
+#define TEGRA_SDMMC4_BASE		0xC8000600
+#define TEGRA_SDMMC4_SIZE		SZ_512
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h
new file mode 100644
index 000000000000..71bbf3422953
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/irqs.h
@@ -0,0 +1,175 @@
+/*
+ * arch/arm/mach-tegra/include/mach/irqs.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_IRQS_H
+#define __MACH_TEGRA_IRQS_H
+
+#define INT_GIC_BASE			0
+
+#define IRQ_LOCALTIMER                  29
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+/* Primary Interrupt Controller */
+#define INT_PRI_BASE			(INT_GIC_BASE + 32)
+#define INT_TMR1			(INT_PRI_BASE + 0)
+#define INT_TMR2			(INT_PRI_BASE + 1)
+#define INT_RTC				(INT_PRI_BASE + 2)
+#define INT_I2S2			(INT_PRI_BASE + 3)
+#define INT_SHR_SEM_INBOX_IBF		(INT_PRI_BASE + 4)
+#define INT_SHR_SEM_INBOX_IBE		(INT_PRI_BASE + 5)
+#define INT_SHR_SEM_OUTBOX_IBF		(INT_PRI_BASE + 6)
+#define INT_SHR_SEM_OUTBOX_IBE		(INT_PRI_BASE + 7)
+#define INT_VDE_UCQ_ERROR		(INT_PRI_BASE + 8)
+#define INT_VDE_SYNC_TOKEN		(INT_PRI_BASE + 9)
+#define INT_VDE_BSE_V			(INT_PRI_BASE + 10)
+#define INT_VDE_BSE_A			(INT_PRI_BASE + 11)
+#define INT_VDE_SXE			(INT_PRI_BASE + 12)
+#define INT_I2S1			(INT_PRI_BASE + 13)
+#define INT_SDMMC1			(INT_PRI_BASE + 14)
+#define INT_SDMMC2			(INT_PRI_BASE + 15)
+#define INT_XIO				(INT_PRI_BASE + 16)
+#define INT_VDE				(INT_PRI_BASE + 17)
+#define INT_AVP_UCQ			(INT_PRI_BASE + 18)
+#define INT_SDMMC3			(INT_PRI_BASE + 19)
+#define INT_USB				(INT_PRI_BASE + 20)
+#define INT_USB2			(INT_PRI_BASE + 21)
+#define INT_PRI_RES_22			(INT_PRI_BASE + 22)
+#define INT_EIDE			(INT_PRI_BASE + 23)
+#define INT_NANDFLASH			(INT_PRI_BASE + 24)
+#define INT_VCP				(INT_PRI_BASE + 25)
+#define INT_APB_DMA			(INT_PRI_BASE + 26)
+#define INT_AHB_DMA			(INT_PRI_BASE + 27)
+#define INT_GNT_0			(INT_PRI_BASE + 28)
+#define INT_GNT_1			(INT_PRI_BASE + 29)
+#define INT_OWR				(INT_PRI_BASE + 30)
+#define INT_SDMMC4			(INT_PRI_BASE + 31)
+
+/* Secondary Interrupt Controller */
+#define INT_SEC_BASE			(INT_PRI_BASE + 32)
+#define INT_GPIO1			(INT_SEC_BASE + 0)
+#define INT_GPIO2			(INT_SEC_BASE + 1)
+#define INT_GPIO3			(INT_SEC_BASE + 2)
+#define INT_GPIO4			(INT_SEC_BASE + 3)
+#define INT_UARTA			(INT_SEC_BASE + 4)
+#define INT_UARTB			(INT_SEC_BASE + 5)
+#define INT_I2C				(INT_SEC_BASE + 6)
+#define INT_SPI				(INT_SEC_BASE + 7)
+#define INT_TWC				(INT_SEC_BASE + 8)
+#define INT_TMR3			(INT_SEC_BASE + 9)
+#define INT_TMR4			(INT_SEC_BASE + 10)
+#define INT_FLOW_RSM0			(INT_SEC_BASE + 11)
+#define INT_FLOW_RSM1			(INT_SEC_BASE + 12)
+#define INT_SPDIF			(INT_SEC_BASE + 13)
+#define INT_UARTC			(INT_SEC_BASE + 14)
+#define INT_MIPI			(INT_SEC_BASE + 15)
+#define INT_EVENTA			(INT_SEC_BASE + 16)
+#define INT_EVENTB			(INT_SEC_BASE + 17)
+#define INT_EVENTC			(INT_SEC_BASE + 18)
+#define INT_EVENTD			(INT_SEC_BASE + 19)
+#define INT_VFIR			(INT_SEC_BASE + 20)
+#define INT_DVC				(INT_SEC_BASE + 21)
+#define INT_SYS_STATS_MON		(INT_SEC_BASE + 22)
+#define INT_GPIO5			(INT_SEC_BASE + 23)
+#define INT_CPU0_PMU_INTR		(INT_SEC_BASE + 24)
+#define INT_CPU2_PMU_INTR		(INT_SEC_BASE + 25)
+#define INT_SEC_RES_26			(INT_SEC_BASE + 26)
+#define INT_S_LINK1			(INT_SEC_BASE + 27)
+#define INT_APB_DMA_COP			(INT_SEC_BASE + 28)
+#define INT_AHB_DMA_COP			(INT_SEC_BASE + 29)
+#define INT_DMA_TX			(INT_SEC_BASE + 30)
+#define INT_DMA_RX			(INT_SEC_BASE + 31)
+
+/* Tertiary Interrupt Controller */
+#define INT_TRI_BASE			(INT_SEC_BASE + 32)
+#define INT_HOST1X_COP_SYNCPT		(INT_TRI_BASE + 0)
+#define INT_HOST1X_MPCORE_SYNCPT	(INT_TRI_BASE + 1)
+#define INT_HOST1X_COP_GENERAL		(INT_TRI_BASE + 2)
+#define INT_HOST1X_MPCORE_GENERAL	(INT_TRI_BASE + 3)
+#define INT_MPE_GENERAL			(INT_TRI_BASE + 4)
+#define INT_VI_GENERAL			(INT_TRI_BASE + 5)
+#define INT_EPP_GENERAL			(INT_TRI_BASE + 6)
+#define INT_ISP_GENERAL			(INT_TRI_BASE + 7)
+#define INT_2D_GENERAL			(INT_TRI_BASE + 8)
+#define INT_DISPLAY_GENERAL		(INT_TRI_BASE + 9)
+#define INT_DISPLAY_B_GENERAL		(INT_TRI_BASE + 10)
+#define INT_HDMI			(INT_TRI_BASE + 11)
+#define INT_TVO_GENERAL			(INT_TRI_BASE + 12)
+#define INT_MC_GENERAL			(INT_TRI_BASE + 13)
+#define INT_EMC_GENERAL			(INT_TRI_BASE + 14)
+#define INT_TRI_RES_15			(INT_TRI_BASE + 15)
+#define INT_TRI_RES_16			(INT_TRI_BASE + 16)
+#define INT_AC97			(INT_TRI_BASE + 17)
+#define INT_SPI_2			(INT_TRI_BASE + 18)
+#define INT_SPI_3			(INT_TRI_BASE + 19)
+#define INT_I2C2			(INT_TRI_BASE + 20)
+#define INT_KBC				(INT_TRI_BASE + 21)
+#define INT_EXTERNAL_PMU		(INT_TRI_BASE + 22)
+#define INT_GPIO6			(INT_TRI_BASE + 23)
+#define INT_TVDAC			(INT_TRI_BASE + 24)
+#define INT_GPIO7			(INT_TRI_BASE + 25)
+#define INT_UARTD			(INT_TRI_BASE + 26)
+#define INT_UARTE			(INT_TRI_BASE + 27)
+#define INT_I2C3			(INT_TRI_BASE + 28)
+#define INT_SPI_4			(INT_TRI_BASE + 29)
+#define INT_TRI_RES_30			(INT_TRI_BASE + 30)
+#define INT_SW_RESERVED			(INT_TRI_BASE + 31)
+
+/* Quaternary Interrupt Controller */
+#define INT_QUAD_BASE			(INT_TRI_BASE + 32)
+#define INT_SNOR			(INT_QUAD_BASE + 0)
+#define INT_USB3			(INT_QUAD_BASE + 1)
+#define INT_PCIE_INTR			(INT_QUAD_BASE + 2)
+#define INT_PCIE_MSI			(INT_QUAD_BASE + 3)
+#define INT_QUAD_RES_4			(INT_QUAD_BASE + 4)
+#define INT_QUAD_RES_5			(INT_QUAD_BASE + 5)
+#define INT_QUAD_RES_6			(INT_QUAD_BASE + 6)
+#define INT_QUAD_RES_7			(INT_QUAD_BASE + 7)
+#define INT_APB_DMA_CH0			(INT_QUAD_BASE + 8)
+#define INT_APB_DMA_CH1			(INT_QUAD_BASE + 9)
+#define INT_APB_DMA_CH2			(INT_QUAD_BASE + 10)
+#define INT_APB_DMA_CH3			(INT_QUAD_BASE + 11)
+#define INT_APB_DMA_CH4			(INT_QUAD_BASE + 12)
+#define INT_APB_DMA_CH5			(INT_QUAD_BASE + 13)
+#define INT_APB_DMA_CH6			(INT_QUAD_BASE + 14)
+#define INT_APB_DMA_CH7			(INT_QUAD_BASE + 15)
+#define INT_APB_DMA_CH8			(INT_QUAD_BASE + 16)
+#define INT_APB_DMA_CH9			(INT_QUAD_BASE + 17)
+#define INT_APB_DMA_CH10		(INT_QUAD_BASE + 18)
+#define INT_APB_DMA_CH11		(INT_QUAD_BASE + 19)
+#define INT_APB_DMA_CH12		(INT_QUAD_BASE + 20)
+#define INT_APB_DMA_CH13		(INT_QUAD_BASE + 21)
+#define INT_APB_DMA_CH14		(INT_QUAD_BASE + 22)
+#define INT_APB_DMA_CH15		(INT_QUAD_BASE + 23)
+#define INT_QUAD_RES_24			(INT_QUAD_BASE + 24)
+#define INT_QUAD_RES_25			(INT_QUAD_BASE + 25)
+#define INT_QUAD_RES_26			(INT_QUAD_BASE + 26)
+#define INT_QUAD_RES_27			(INT_QUAD_BASE + 27)
+#define INT_QUAD_RES_28			(INT_QUAD_BASE + 28)
+#define INT_QUAD_RES_29			(INT_QUAD_BASE + 29)
+#define INT_QUAD_RES_30			(INT_QUAD_BASE + 30)
+#define INT_QUAD_RES_31			(INT_QUAD_BASE + 31)
+
+#define INT_GPIO_BASE			(INT_QUAD_BASE + 32)
+#define INT_GPIO_NR			(28 * 8)
+
+#define NR_IRQS				(INT_GPIO_BASE + INT_GPIO_NR)
+#endif
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/legacy_irq.h b/arch/arm/mach-tegra/include/mach/legacy_irq.h
new file mode 100644
index 000000000000..db1eb3dd04c8
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/legacy_irq.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-tegra/include/mach/legacy_irq.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Author: Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _ARCH_ARM_MACH_TEGRA_LEGARY_IRQ_H
+#define _ARCH_ARM_MACH_TEGRA_LEGARY_IRQ_H
+
+void tegra_legacy_mask_irq(unsigned int irq);
+void tegra_legacy_unmask_irq(unsigned int irq);
+void tegra_legacy_select_fiq(unsigned int irq, bool fiq);
+void tegra_legacy_force_irq_set(unsigned int irq);
+void tegra_legacy_force_irq_clr(unsigned int irq);
+int tegra_legacy_force_irq_status(unsigned int irq);
+void tegra_legacy_select_fiq(unsigned int irq, bool fiq);
+unsigned long tegra_legacy_vfiq(int nr);
+unsigned long tegra_legacy_class(int nr);
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/memory.h
new file mode 100644
index 000000000000..6151bab62af2
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-tegra/include/mach/memory.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_MEMORY_H
+#define __MACH_TEGRA_MEMORY_H
+
+/* physical offset of RAM */
+#define PHYS_OFFSET		UL(0)
+
+#endif
+
diff --git a/arch/arm/mach-tegra/include/mach/pinmux-t2.h b/arch/arm/mach-tegra/include/mach/pinmux-t2.h
new file mode 100644
index 000000000000..e5b9d740f973
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/pinmux-t2.h
@@ -0,0 +1,174 @@
+/*
+ * linux/arch/arm/mach-tegra/include/mach/pinmux-t2.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_PINMUX_T2_H
+#define __MACH_TEGRA_PINMUX_T2_H
+
+enum tegra_pingroup {
+	TEGRA_PINGROUP_ATA = 0,
+	TEGRA_PINGROUP_ATB,
+	TEGRA_PINGROUP_ATC,
+	TEGRA_PINGROUP_ATD,
+	TEGRA_PINGROUP_ATE,
+	TEGRA_PINGROUP_CDEV1,
+	TEGRA_PINGROUP_CDEV2,
+	TEGRA_PINGROUP_CRTP,
+	TEGRA_PINGROUP_CSUS,
+	TEGRA_PINGROUP_DAP1,
+	TEGRA_PINGROUP_DAP2,
+	TEGRA_PINGROUP_DAP3,
+	TEGRA_PINGROUP_DAP4,
+	TEGRA_PINGROUP_DDC,
+	TEGRA_PINGROUP_DTA,
+	TEGRA_PINGROUP_DTB,
+	TEGRA_PINGROUP_DTC,
+	TEGRA_PINGROUP_DTD,
+	TEGRA_PINGROUP_DTE,
+	TEGRA_PINGROUP_DTF,
+	TEGRA_PINGROUP_GMA,
+	TEGRA_PINGROUP_GMB,
+	TEGRA_PINGROUP_GMC,
+	TEGRA_PINGROUP_GMD,
+	TEGRA_PINGROUP_GME,
+	TEGRA_PINGROUP_GPU,
+	TEGRA_PINGROUP_GPU7,
+	TEGRA_PINGROUP_GPV,
+	TEGRA_PINGROUP_HDINT,
+	TEGRA_PINGROUP_I2CP,
+	TEGRA_PINGROUP_IRRX,
+	TEGRA_PINGROUP_IRTX,
+	TEGRA_PINGROUP_KBCA,
+	TEGRA_PINGROUP_KBCB,
+	TEGRA_PINGROUP_KBCC,
+	TEGRA_PINGROUP_KBCD,
+	TEGRA_PINGROUP_KBCE,
+	TEGRA_PINGROUP_KBCF,
+	TEGRA_PINGROUP_LCSN,
+	TEGRA_PINGROUP_LD0,
+	TEGRA_PINGROUP_LD1,
+	TEGRA_PINGROUP_LD10,
+	TEGRA_PINGROUP_LD11,
+	TEGRA_PINGROUP_LD12,
+	TEGRA_PINGROUP_LD13,
+	TEGRA_PINGROUP_LD14,
+	TEGRA_PINGROUP_LD15,
+	TEGRA_PINGROUP_LD16,
+	TEGRA_PINGROUP_LD17,
+	TEGRA_PINGROUP_LD2,
+	TEGRA_PINGROUP_LD3,
+	TEGRA_PINGROUP_LD4,
+	TEGRA_PINGROUP_LD5,
+	TEGRA_PINGROUP_LD6,
+	TEGRA_PINGROUP_LD7,
+	TEGRA_PINGROUP_LD8,
+	TEGRA_PINGROUP_LD9,
+	TEGRA_PINGROUP_LDC,
+	TEGRA_PINGROUP_LDI,
+	TEGRA_PINGROUP_LHP0,
+	TEGRA_PINGROUP_LHP1,
+	TEGRA_PINGROUP_LHP2,
+	TEGRA_PINGROUP_LHS,
+	TEGRA_PINGROUP_LM0,
+	TEGRA_PINGROUP_LM1,
+	TEGRA_PINGROUP_LPP,
+	TEGRA_PINGROUP_LPW0,
+	TEGRA_PINGROUP_LPW1,
+	TEGRA_PINGROUP_LPW2,
+	TEGRA_PINGROUP_LSC0,
+	TEGRA_PINGROUP_LSC1,
+	TEGRA_PINGROUP_LSCK,
+	TEGRA_PINGROUP_LSDA,
+	TEGRA_PINGROUP_LSDI,
+	TEGRA_PINGROUP_LSPI,
+	TEGRA_PINGROUP_LVP0,
+	TEGRA_PINGROUP_LVP1,
+	TEGRA_PINGROUP_LVS,
+	TEGRA_PINGROUP_OWC,
+	TEGRA_PINGROUP_PMC,
+	TEGRA_PINGROUP_PTA,
+	TEGRA_PINGROUP_RM,
+	TEGRA_PINGROUP_SDB,
+	TEGRA_PINGROUP_SDC,
+	TEGRA_PINGROUP_SDD,
+	TEGRA_PINGROUP_SDIO1,
+	TEGRA_PINGROUP_SLXA,
+	TEGRA_PINGROUP_SLXC,
+	TEGRA_PINGROUP_SLXD,
+	TEGRA_PINGROUP_SLXK,
+	TEGRA_PINGROUP_SPDI,
+	TEGRA_PINGROUP_SPDO,
+	TEGRA_PINGROUP_SPIA,
+	TEGRA_PINGROUP_SPIB,
+	TEGRA_PINGROUP_SPIC,
+	TEGRA_PINGROUP_SPID,
+	TEGRA_PINGROUP_SPIE,
+	TEGRA_PINGROUP_SPIF,
+	TEGRA_PINGROUP_SPIG,
+	TEGRA_PINGROUP_SPIH,
+	TEGRA_PINGROUP_UAA,
+	TEGRA_PINGROUP_UAB,
+	TEGRA_PINGROUP_UAC,
+	TEGRA_PINGROUP_UAD,
+	TEGRA_PINGROUP_UCA,
+	TEGRA_PINGROUP_UCB,
+	TEGRA_PINGROUP_UDA,
+	/* these pin groups only have pullup and pull down control */
+	TEGRA_PINGROUP_CK32,
+	TEGRA_PINGROUP_DDRC,
+	TEGRA_PINGROUP_PMCA,
+	TEGRA_PINGROUP_PMCB,
+	TEGRA_PINGROUP_PMCC,
+	TEGRA_PINGROUP_PMCD,
+	TEGRA_PINGROUP_PMCE,
+	TEGRA_PINGROUP_XM2C,
+	TEGRA_PINGROUP_XM2D,
+	TEGRA_MAX_PINGROUP,
+};
+
+enum tegra_drive_pingroup {
+	TEGRA_DRIVE_PINGROUP_AO1 = 0,
+	TEGRA_DRIVE_PINGROUP_AO2,
+	TEGRA_DRIVE_PINGROUP_AT1,
+	TEGRA_DRIVE_PINGROUP_AT2,
+	TEGRA_DRIVE_PINGROUP_CDEV1,
+	TEGRA_DRIVE_PINGROUP_CDEV2,
+	TEGRA_DRIVE_PINGROUP_CSUS,
+	TEGRA_DRIVE_PINGROUP_DAP1,
+	TEGRA_DRIVE_PINGROUP_DAP2,
+	TEGRA_DRIVE_PINGROUP_DAP3,
+	TEGRA_DRIVE_PINGROUP_DAP4,
+	TEGRA_DRIVE_PINGROUP_DBG,
+	TEGRA_DRIVE_PINGROUP_LCD1,
+	TEGRA_DRIVE_PINGROUP_LCD2,
+	TEGRA_DRIVE_PINGROUP_SDMMC2,
+	TEGRA_DRIVE_PINGROUP_SDMMC3,
+	TEGRA_DRIVE_PINGROUP_SPI,
+	TEGRA_DRIVE_PINGROUP_UAA,
+	TEGRA_DRIVE_PINGROUP_UAB,
+	TEGRA_DRIVE_PINGROUP_UART2,
+	TEGRA_DRIVE_PINGROUP_UART3,
+	TEGRA_DRIVE_PINGROUP_VI1,
+	TEGRA_DRIVE_PINGROUP_VI2,
+	TEGRA_DRIVE_PINGROUP_XM2A,
+	TEGRA_DRIVE_PINGROUP_XM2C,
+	TEGRA_DRIVE_PINGROUP_XM2D,
+	TEGRA_DRIVE_PINGROUP_XM2CLK,
+	TEGRA_DRIVE_PINGROUP_MEMCOMP,
+	TEGRA_MAX_DRIVE_PINGROUP,
+};
+
+#endif
+
diff --git a/arch/arm/mach-tegra/include/mach/pinmux.h b/arch/arm/mach-tegra/include/mach/pinmux.h
new file mode 100644
index 000000000000..defd8775defa
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/pinmux.h
@@ -0,0 +1,240 @@
+/*
+ * linux/arch/arm/mach-tegra/include/mach/pinmux.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_PINMUX_H
+#define __MACH_TEGRA_PINMUX_H
+
+#if defined(CONFIG_ARCH_TEGRA_2x_SOC)
+#include "pinmux-t2.h"
+#else
+#error "Undefined Tegra architecture"
+#endif
+
+enum tegra_mux_func {
+	TEGRA_MUX_RSVD = 0x8000,
+	TEGRA_MUX_RSVD1 = 0x8000,
+	TEGRA_MUX_RSVD2 = 0x8001,
+	TEGRA_MUX_RSVD3 = 0x8002,
+	TEGRA_MUX_RSVD4 = 0x8003,
+	TEGRA_MUX_NONE = -1,
+	TEGRA_MUX_AHB_CLK,
+	TEGRA_MUX_APB_CLK,
+	TEGRA_MUX_AUDIO_SYNC,
+	TEGRA_MUX_CRT,
+	TEGRA_MUX_DAP1,
+	TEGRA_MUX_DAP2,
+	TEGRA_MUX_DAP3,
+	TEGRA_MUX_DAP4,
+	TEGRA_MUX_DAP5,
+	TEGRA_MUX_DISPLAYA,
+	TEGRA_MUX_DISPLAYB,
+	TEGRA_MUX_EMC_TEST0_DLL,
+	TEGRA_MUX_EMC_TEST1_DLL,
+	TEGRA_MUX_GMI,
+	TEGRA_MUX_GMI_INT,
+	TEGRA_MUX_HDMI,
+	TEGRA_MUX_I2C,
+	TEGRA_MUX_I2C2,
+	TEGRA_MUX_I2C3,
+	TEGRA_MUX_IDE,
+	TEGRA_MUX_IRDA,
+	TEGRA_MUX_KBC,
+	TEGRA_MUX_MIO,
+	TEGRA_MUX_MIPI_HS,
+	TEGRA_MUX_NAND,
+	TEGRA_MUX_OSC,
+	TEGRA_MUX_OWR,
+	TEGRA_MUX_PCIE,
+	TEGRA_MUX_PLLA_OUT,
+	TEGRA_MUX_PLLC_OUT1,
+	TEGRA_MUX_PLLM_OUT1,
+	TEGRA_MUX_PLLP_OUT2,
+	TEGRA_MUX_PLLP_OUT3,
+	TEGRA_MUX_PLLP_OUT4,
+	TEGRA_MUX_PWM,
+	TEGRA_MUX_PWR_INTR,
+	TEGRA_MUX_PWR_ON,
+	TEGRA_MUX_RTCK,
+	TEGRA_MUX_SDIO1,
+	TEGRA_MUX_SDIO2,
+	TEGRA_MUX_SDIO3,
+	TEGRA_MUX_SDIO4,
+	TEGRA_MUX_SFLASH,
+	TEGRA_MUX_SPDIF,
+	TEGRA_MUX_SPI1,
+	TEGRA_MUX_SPI2,
+	TEGRA_MUX_SPI2_ALT,
+	TEGRA_MUX_SPI3,
+	TEGRA_MUX_SPI4,
+	TEGRA_MUX_TRACE,
+	TEGRA_MUX_TWC,
+	TEGRA_MUX_UARTA,
+	TEGRA_MUX_UARTB,
+	TEGRA_MUX_UARTC,
+	TEGRA_MUX_UARTD,
+	TEGRA_MUX_UARTE,
+	TEGRA_MUX_ULPI,
+	TEGRA_MUX_VI,
+	TEGRA_MUX_VI_SENSOR_CLK,
+	TEGRA_MUX_XIO,
+	TEGRA_MUX_SAFE,
+	TEGRA_MAX_MUX,
+};
+
+enum tegra_pullupdown {
+	TEGRA_PUPD_NORMAL = 0,
+	TEGRA_PUPD_PULL_DOWN,
+	TEGRA_PUPD_PULL_UP,
+};
+
+enum tegra_tristate {
+	TEGRA_TRI_NORMAL = 0,
+	TEGRA_TRI_TRISTATE = 1,
+};
+
+enum tegra_vddio {
+	TEGRA_VDDIO_BB = 0,
+	TEGRA_VDDIO_LCD,
+	TEGRA_VDDIO_VI,
+	TEGRA_VDDIO_UART,
+	TEGRA_VDDIO_DDR,
+	TEGRA_VDDIO_NAND,
+	TEGRA_VDDIO_SYS,
+	TEGRA_VDDIO_AUDIO,
+	TEGRA_VDDIO_SD,
+};
+
+struct tegra_pingroup_config {
+	enum tegra_pingroup	pingroup;
+	enum tegra_mux_func	func;
+	enum tegra_pullupdown	pupd;
+	enum tegra_tristate	tristate;
+};
+
+enum tegra_slew {
+	TEGRA_SLEW_FASTEST = 0,
+	TEGRA_SLEW_FAST,
+	TEGRA_SLEW_SLOW,
+	TEGRA_SLEW_SLOWEST,
+	TEGRA_MAX_SLEW,
+};
+
+enum tegra_pull_strength {
+	TEGRA_PULL_0 = 0,
+	TEGRA_PULL_1,
+	TEGRA_PULL_2,
+	TEGRA_PULL_3,
+	TEGRA_PULL_4,
+	TEGRA_PULL_5,
+	TEGRA_PULL_6,
+	TEGRA_PULL_7,
+	TEGRA_PULL_8,
+	TEGRA_PULL_9,
+	TEGRA_PULL_10,
+	TEGRA_PULL_11,
+	TEGRA_PULL_12,
+	TEGRA_PULL_13,
+	TEGRA_PULL_14,
+	TEGRA_PULL_15,
+	TEGRA_PULL_16,
+	TEGRA_PULL_17,
+	TEGRA_PULL_18,
+	TEGRA_PULL_19,
+	TEGRA_PULL_20,
+	TEGRA_PULL_21,
+	TEGRA_PULL_22,
+	TEGRA_PULL_23,
+	TEGRA_PULL_24,
+	TEGRA_PULL_25,
+	TEGRA_PULL_26,
+	TEGRA_PULL_27,
+	TEGRA_PULL_28,
+	TEGRA_PULL_29,
+	TEGRA_PULL_30,
+	TEGRA_PULL_31,
+	TEGRA_MAX_PULL,
+};
+
+enum tegra_drive {
+	TEGRA_DRIVE_DIV_8 = 0,
+	TEGRA_DRIVE_DIV_4,
+	TEGRA_DRIVE_DIV_2,
+	TEGRA_DRIVE_DIV_1,
+	TEGRA_MAX_DRIVE,
+};
+
+enum tegra_hsm {
+	TEGRA_HSM_DISABLE = 0,
+	TEGRA_HSM_ENABLE,
+};
+
+enum tegra_schmitt {
+	TEGRA_SCHMITT_DISABLE = 0,
+	TEGRA_SCHMITT_ENABLE,
+};
+
+struct tegra_drive_pingroup_config {
+	enum tegra_drive_pingroup pingroup;
+	enum tegra_hsm hsm;
+	enum tegra_schmitt schmitt;
+	enum tegra_drive drive;
+	enum tegra_pull_strength pull_down;
+	enum tegra_pull_strength pull_up;
+	enum tegra_slew slew_rising;
+	enum tegra_slew slew_falling;
+};
+
+struct tegra_drive_pingroup_desc {
+	const char *name;
+	s16 reg;
+};
+
+struct tegra_pingroup_desc {
+	const char *name;
+	int funcs[4];
+	int func_safe;
+	int vddio;
+	s16 tri_reg; 	/* offset into the TRISTATE_REG_* register bank */
+	s16 mux_reg;	/* offset into the PIN_MUX_CTL_* register bank */
+	s16 pupd_reg;	/* offset into the PULL_UPDOWN_REG_* register bank */
+	s8 tri_bit; 	/* offset into the TRISTATE_REG_* register bit */
+	s8 mux_bit;	/* offset into the PIN_MUX_CTL_* register bit */
+	s8 pupd_bit;	/* offset into the PULL_UPDOWN_REG_* register bit */
+};
+
+extern const struct tegra_pingroup_desc tegra_soc_pingroups[];
+extern const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[];
+
+int tegra_pinmux_set_tristate(enum tegra_pingroup pg,
+	enum tegra_tristate tristate);
+int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg,
+	enum tegra_pullupdown pupd);
+
+void tegra_pinmux_config_table(const struct tegra_pingroup_config *config,
+	int len);
+
+void tegra_drive_pinmux_config_table(struct tegra_drive_pingroup_config *config,
+	int len);
+void tegra_pinmux_set_safe_pinmux_table(const struct tegra_pingroup_config *config,
+	int len);
+void tegra_pinmux_config_pinmux_table(const struct tegra_pingroup_config *config,
+	int len);
+void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *config,
+	int len, enum tegra_tristate tristate);
+void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *config,
+	int len, enum tegra_pullupdown pupd);
+#endif
+
diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h
new file mode 100644
index 000000000000..e4a34a35a544
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/smp.h
@@ -0,0 +1,22 @@
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+#include <asm/smp_mpidr.h>
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+
+/*
+ * Do nothing on MPcore.
+ */
+static inline void smp_cross_call_done(cpumask_t callmap)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
new file mode 100644
index 000000000000..84d5d46113f7
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/system.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-tegra/include/mach/system.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_SYSTEM_H
+#define __MACH_TEGRA_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/iomap.h>
+
+static inline void arch_idle(void)
+{
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	void __iomem *reset = IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x04);
+	u32 reg = readl(reset);
+	reg |= 0x04;
+	writel(reg, reset);
+}
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/timex.h b/arch/arm/mach-tegra/include/mach/timex.h
new file mode 100644
index 000000000000..a44ccbdb7dbf
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-tegra/include/mach/timex.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_TIMEX_H
+#define __MACH_TEGRA_TIMEX_H
+
+#define CLOCK_TICK_RATE		1000000
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
new file mode 100644
index 000000000000..6c4dd815abd7
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-tegra/include/mach/uncompress.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_UNCOMPRESS_H
+#define __MACH_TEGRA_UNCOMPRESS_H
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <mach/iomap.h>
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTA)
+#define DEBUG_UART_BASE TEGRA_UARTA_BASE
+#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
+#define DEBUG_UART_BASE TEGRA_UARTB_BASE
+#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
+#define DEBUG_UART_BASE TEGRA_UARTC_BASE
+#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
+#define DEBUG_UART_BASE TEGRA_UARTD_BASE
+#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
+#define DEBUG_UART_BASE TEGRA_UARTE_BASE
+#else
+#define DEBUG_UART_BASE NULL
+#endif
+
+static void putc(int c)
+{
+	volatile u8 *uart = (volatile u8 *)DEBUG_UART_BASE;
+	int shift = 2;
+
+	if (uart == NULL)
+		return;
+
+	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+		barrier();
+	uart[UART_TX << shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+	volatile u8 *uart = (volatile u8 *)DEBUG_UART_BASE;
+	int shift = 2;
+
+	if (uart == NULL)
+		return;
+
+	uart[UART_LCR << shift] |= UART_LCR_DLAB;
+	uart[UART_DLL << shift] = 0x75;
+	uart[UART_DLM << shift] = 0x0;
+	uart[UART_LCR << shift] = 3;
+}
+
+static inline void arch_decomp_wdog(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/vmalloc.h b/arch/arm/mach-tegra/include/mach/vmalloc.h
new file mode 100644
index 000000000000..fd6aa65b2dc6
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/vmalloc.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-tegra/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_VMALLOC_H
+#define __MACH_TEGRA_VMALLOC_H
+
+#include <asm/sizes.h>
+
+#define VMALLOC_END        0xFE000000UL
+
+#endif
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
new file mode 100644
index 000000000000..31848a9592f8
--- /dev/null
+++ b/arch/arm/mach-tegra/io.c
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/mach-tegra/io.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+
+#include "board.h"
+
+static struct map_desc tegra_io_desc[] __initdata = {
+	{
+		.virtual = IO_PPSB_VIRT,
+		.pfn = __phys_to_pfn(IO_PPSB_PHYS),
+		.length = IO_PPSB_SIZE,
+		.type = MT_DEVICE,
+	},
+	{
+		.virtual = IO_APB_VIRT,
+		.pfn = __phys_to_pfn(IO_APB_PHYS),
+		.length = IO_APB_SIZE,
+		.type = MT_DEVICE,
+	},
+	{
+		.virtual = IO_CPU_VIRT,
+		.pfn = __phys_to_pfn(IO_CPU_PHYS),
+		.length = IO_CPU_SIZE,
+		.type = MT_DEVICE,
+	},
+	{
+		.virtual = IO_IRAM_VIRT,
+		.pfn = __phys_to_pfn(IO_IRAM_PHYS),
+		.length = IO_IRAM_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+void __init tegra_map_common_io(void)
+{
+	iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc));
+}
+
+/*
+ * Intercept ioremap() requests for addresses in our fixed mapping regions.
+ */
+void __iomem *tegra_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+	void __iomem *v = IO_ADDRESS(p);
+	if (v == NULL)
+		v = __arm_ioremap(p, size, type);
+	return v;
+}
+EXPORT_SYMBOL(tegra_ioremap);
+
+void tegra_iounmap(volatile void __iomem *addr)
+{
+	unsigned long virt = (unsigned long)addr;
+
+	if (virt >= VMALLOC_START && virt < VMALLOC_END)
+		__iounmap(addr);
+}
+EXPORT_SYMBOL(tegra_iounmap);
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
new file mode 100644
index 000000000000..50a8dfb9a0cf
--- /dev/null
+++ b/arch/arm/mach-tegra/irq.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * Copyright (C) 2010, NVIDIA Corporation
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/gic.h>
+
+#include <mach/iomap.h>
+
+#include "board.h"
+
+#define INT_SYS_NR	(INT_GPIO_BASE - INT_PRI_BASE)
+#define INT_SYS_SZ	(INT_SEC_BASE - INT_PRI_BASE)
+#define PPI_NR		((INT_SYS_NR+INT_SYS_SZ-1)/INT_SYS_SZ)
+
+#define APBDMA_IRQ_STA_CPU  0x14
+#define APBDMA_IRQ_MASK_SET 0x20
+#define APBDMA_IRQ_MASK_CLR 0x24
+
+#define ICTLR_CPU_IER		0x20
+#define ICTLR_CPU_IER_SET	0x24
+#define ICTLR_CPU_IER_CLR	0x28
+#define ICTLR_CPU_IEP_CLASS	0x2c
+#define ICTLR_COP_IER		0x30
+#define ICTLR_COP_IER_SET	0x34
+#define ICTLR_COP_IER_CLR	0x38
+#define ICTLR_COP_IEP_CLASS	0x3c
+
+static void (*gic_mask_irq)(unsigned int irq);
+static void (*gic_unmask_irq)(unsigned int irq);
+
+#define irq_to_ictlr(irq) (((irq)-32) >> 5)
+static void __iomem *tegra_ictlr_base = IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE);
+#define ictlr_to_virt(ictlr) (tegra_ictlr_base + (ictlr)*0x100)
+
+static void tegra_mask(unsigned int irq)
+{
+	void __iomem *addr = ictlr_to_virt(irq_to_ictlr(irq));
+	gic_mask_irq(irq);
+	writel(1<<(irq&31), addr+ICTLR_CPU_IER_CLR);
+}
+
+static void tegra_unmask(unsigned int irq)
+{
+	void __iomem *addr = ictlr_to_virt(irq_to_ictlr(irq));
+	gic_unmask_irq(irq);
+	writel(1<<(irq&31), addr+ICTLR_CPU_IER_SET);
+}
+
+#ifdef CONFIG_PM
+
+static int tegra_set_wake(unsigned int irq, unsigned int on)
+{
+	return 0;
+}
+#endif
+
+static struct irq_chip tegra_irq = {
+	.name		= "PPI",
+	.mask		= tegra_mask,
+	.unmask		= tegra_unmask,
+#ifdef CONFIG_PM
+	.set_wake	= tegra_set_wake,
+#endif
+};
+
+void __init tegra_init_irq(void)
+{
+	struct irq_chip *gic;
+	unsigned int i;
+
+	for (i = 0; i < PPI_NR; i++) {
+		writel(~0, ictlr_to_virt(i) + ICTLR_CPU_IER_CLR);
+		writel(0, ictlr_to_virt(i) + ICTLR_CPU_IEP_CLASS);
+	}
+
+	gic_dist_init(0, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), 29);
+	gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
+
+	gic = get_irq_chip(29);
+	gic_unmask_irq = gic->unmask;
+	gic_mask_irq = gic->mask;
+	tegra_irq.ack = gic->ack;
+#ifdef CONFIG_SMP
+	tegra_irq.set_affinity = gic->set_affinity;
+#endif
+
+	for (i = INT_PRI_BASE; i < INT_GPIO_BASE; i++) {
+		set_irq_chip(i, &tegra_irq);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+}
+
+#ifdef CONFIG_PM
+static u32 cop_ier[PPI_NR];
+static u32 cpu_ier[PPI_NR];
+static u32 cpu_iep[PPI_NR];
+
+void tegra_irq_suspend(void)
+{
+	unsigned long flags;
+	int i;
+
+	for (i = INT_PRI_BASE; i < INT_GPIO_BASE; i++) {
+		struct irq_desc *desc = irq_to_desc(i);
+		if (!desc)
+			continue;
+		if (desc->status & IRQ_WAKEUP) {
+			pr_debug("irq %d is wakeup\n", i);
+			continue;
+		}
+		disable_irq(i);
+	}
+
+	local_irq_save(flags);
+	for (i = 0; i < PPI_NR; i++) {
+		void __iomem *ictlr = ictlr_to_virt(i);
+		cpu_ier[i] = readl(ictlr + ICTLR_CPU_IER);
+		cpu_iep[i] = readl(ictlr + ICTLR_CPU_IEP_CLASS);
+		cop_ier[i] = readl(ictlr + ICTLR_COP_IER);
+		writel(~0, ictlr + ICTLR_COP_IER_CLR);
+	}
+	local_irq_restore(flags);
+}
+
+void tegra_irq_resume(void)
+{
+	unsigned long flags;
+	int i;
+
+	local_irq_save(flags);
+	for (i = 0; i < PPI_NR; i++) {
+		void __iomem *ictlr = ictlr_to_virt(i);
+		writel(cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS);
+		writel(~0ul, ictlr + ICTLR_CPU_IER_CLR);
+		writel(cpu_ier[i], ictlr + ICTLR_CPU_IER_SET);
+		writel(0, ictlr + ICTLR_COP_IEP_CLASS);
+		writel(~0ul, ictlr + ICTLR_COP_IER_CLR);
+		writel(cop_ier[i], ictlr + ICTLR_COP_IER_SET);
+	}
+	local_irq_restore(flags);
+
+	for (i = INT_PRI_BASE; i < INT_GPIO_BASE; i++) {
+		struct irq_desc *desc = irq_to_desc(i);
+		if (!desc || (desc->status & IRQ_WAKEUP))
+			continue;
+		enable_irq(i);
+	}
+}
+#endif
diff --git a/arch/arm/mach-tegra/legacy_irq.c b/arch/arm/mach-tegra/legacy_irq.c
new file mode 100644
index 000000000000..7cc8601c19ff
--- /dev/null
+++ b/arch/arm/mach-tegra/legacy_irq.c
@@ -0,0 +1,114 @@
+/*
+ * arch/arm/mach-tegra/legacy_irq.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Author: Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/iomap.h>
+#include <mach/legacy_irq.h>
+
+#define ICTLR_CPU_IER		0x20
+#define ICTLR_CPU_IER_SET	0x24
+#define ICTLR_CPU_IER_CLR	0x28
+#define ICTLR_CPU_IEP_CLASS	0x2C
+#define ICTLR_CPU_IEP_VFIQ	0x08
+#define ICTLR_CPU_IEP_FIR	0x14
+#define ICTLR_CPU_IEP_FIR_SET	0x18
+#define ICTLR_CPU_IEP_FIR_CLR	0x1c
+
+static void __iomem *ictlr_reg_base[] = {
+	IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE),
+	IO_ADDRESS(TEGRA_SECONDARY_ICTLR_BASE),
+	IO_ADDRESS(TEGRA_TERTIARY_ICTLR_BASE),
+	IO_ADDRESS(TEGRA_QUATERNARY_ICTLR_BASE),
+};
+
+/* When going into deep sleep, the CPU is powered down, taking the GIC with it
+   In order to wake, the wake interrupts need to be enabled in the legacy
+   interrupt controller. */
+void tegra_legacy_unmask_irq(unsigned int irq)
+{
+	void __iomem *base;
+	pr_debug("%s: %d\n", __func__, irq);
+
+	irq -= 32;
+	base = ictlr_reg_base[irq>>5];
+	writel(1 << (irq & 31), base + ICTLR_CPU_IER_SET);
+}
+
+void tegra_legacy_mask_irq(unsigned int irq)
+{
+	void __iomem *base;
+	pr_debug("%s: %d\n", __func__, irq);
+
+	irq -= 32;
+	base = ictlr_reg_base[irq>>5];
+	writel(1 << (irq & 31), base + ICTLR_CPU_IER_CLR);
+}
+
+void tegra_legacy_force_irq_set(unsigned int irq)
+{
+	void __iomem *base;
+	pr_debug("%s: %d\n", __func__, irq);
+
+	irq -= 32;
+	base = ictlr_reg_base[irq>>5];
+	writel(1 << (irq & 31), base + ICTLR_CPU_IEP_FIR_SET);
+}
+
+void tegra_legacy_force_irq_clr(unsigned int irq)
+{
+	void __iomem *base;
+	pr_debug("%s: %d\n", __func__, irq);
+
+	irq -= 32;
+	base = ictlr_reg_base[irq>>5];
+	writel(1 << (irq & 31), base + ICTLR_CPU_IEP_FIR_CLR);
+}
+
+int tegra_legacy_force_irq_status(unsigned int irq)
+{
+	void __iomem *base;
+	pr_debug("%s: %d\n", __func__, irq);
+
+	irq -= 32;
+	base = ictlr_reg_base[irq>>5];
+	return !!(readl(base + ICTLR_CPU_IEP_FIR) & (1 << (irq & 31)));
+}
+
+void tegra_legacy_select_fiq(unsigned int irq, bool fiq)
+{
+	void __iomem *base;
+	pr_debug("%s: %d\n", __func__, irq);
+
+	irq -= 32;
+	base = ictlr_reg_base[irq>>5];
+	writel(fiq << (irq & 31), base + ICTLR_CPU_IEP_CLASS);
+}
+
+unsigned long tegra_legacy_vfiq(int nr)
+{
+	void __iomem *base;
+	base = ictlr_reg_base[nr];
+	return readl(base + ICTLR_CPU_IEP_VFIQ);
+}
+
+unsigned long tegra_legacy_class(int nr)
+{
+	void __iomem *base;
+	base = ictlr_reg_base[nr];
+	return readl(base + ICTLR_CPU_IEP_CLASS);
+}
diff --git a/arch/arm/mach-tegra/localtimer.c b/arch/arm/mach-tegra/localtimer.c
new file mode 100644
index 000000000000..f81ca7cbbc1f
--- /dev/null
+++ b/arch/arm/mach-tegra/localtimer.c
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/mach-tegra/localtimer.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
new file mode 100644
index 000000000000..53f5fa37014a
--- /dev/null
+++ b/arch/arm/mach-tegra/pcie.c
@@ -0,0 +1,915 @@
+/*
+ * arch/arm/mach-tegra/pci.c
+ *
+ * PCIe host controller driver for TEGRA(2) SOCs
+ *
+ * Copyright (c) 2010, CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * Based on NVIDIA PCIe driver
+ * Copyright (c) 2008-2009, NVIDIA Corporation.
+ *
+ * Bits taken from arch/arm/mach-dove/pcie.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+
+#include <asm/sizes.h>
+#include <asm/mach/pci.h>
+
+#include <mach/pinmux.h>
+#include <mach/iomap.h>
+#include <mach/clk.h>
+
+/* register definitions */
+#define AFI_OFFSET	0x3800
+#define PADS_OFFSET	0x3000
+#define RP0_OFFSET	0x0000
+#define RP1_OFFSET	0x1000
+
+#define AFI_AXI_BAR0_SZ	0x00
+#define AFI_AXI_BAR1_SZ	0x04
+#define AFI_AXI_BAR2_SZ	0x08
+#define AFI_AXI_BAR3_SZ	0x0c
+#define AFI_AXI_BAR4_SZ	0x10
+#define AFI_AXI_BAR5_SZ	0x14
+
+#define AFI_AXI_BAR0_START	0x18
+#define AFI_AXI_BAR1_START	0x1c
+#define AFI_AXI_BAR2_START	0x20
+#define AFI_AXI_BAR3_START	0x24
+#define AFI_AXI_BAR4_START	0x28
+#define AFI_AXI_BAR5_START	0x2c
+
+#define AFI_FPCI_BAR0	0x30
+#define AFI_FPCI_BAR1	0x34
+#define AFI_FPCI_BAR2	0x38
+#define AFI_FPCI_BAR3	0x3c
+#define AFI_FPCI_BAR4	0x40
+#define AFI_FPCI_BAR5	0x44
+
+#define AFI_CACHE_BAR0_SZ	0x48
+#define AFI_CACHE_BAR0_ST	0x4c
+#define AFI_CACHE_BAR1_SZ	0x50
+#define AFI_CACHE_BAR1_ST	0x54
+
+#define AFI_MSI_BAR_SZ		0x60
+#define AFI_MSI_FPCI_BAR_ST	0x64
+#define AFI_MSI_AXI_BAR_ST	0x68
+
+#define AFI_CONFIGURATION		0xac
+#define  AFI_CONFIGURATION_EN_FPCI	(1 << 0)
+
+#define AFI_FPCI_ERROR_MASKS	0xb0
+
+#define AFI_INTR_MASK		0xb4
+#define  AFI_INTR_MASK_INT_MASK	(1 << 0)
+#define  AFI_INTR_MASK_MSI_MASK	(1 << 8)
+
+#define AFI_INTR_CODE		0xb8
+#define  AFI_INTR_CODE_MASK	0xf
+#define  AFI_INTR_MASTER_ABORT	4
+#define  AFI_INTR_LEGACY	6
+
+#define AFI_INTR_SIGNATURE	0xbc
+#define AFI_SM_INTR_ENABLE	0xc4
+
+#define AFI_AFI_INTR_ENABLE		0xc8
+#define  AFI_INTR_EN_INI_SLVERR		(1 << 0)
+#define  AFI_INTR_EN_INI_DECERR		(1 << 1)
+#define  AFI_INTR_EN_TGT_SLVERR		(1 << 2)
+#define  AFI_INTR_EN_TGT_DECERR		(1 << 3)
+#define  AFI_INTR_EN_TGT_WRERR		(1 << 4)
+#define  AFI_INTR_EN_DFPCI_DECERR	(1 << 5)
+#define  AFI_INTR_EN_AXI_DECERR		(1 << 6)
+#define  AFI_INTR_EN_FPCI_TIMEOUT	(1 << 7)
+
+#define AFI_PCIE_CONFIG					0x0f8
+#define  AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE		(1 << 1)
+#define  AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE		(1 << 2)
+#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK	(0xf << 20)
+#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE	(0x0 << 20)
+#define  AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL	(0x1 << 20)
+
+#define AFI_FUSE			0x104
+#define  AFI_FUSE_PCIE_T0_GEN2_DIS	(1 << 2)
+
+#define AFI_PEX0_CTRL			0x110
+#define AFI_PEX1_CTRL			0x118
+#define  AFI_PEX_CTRL_RST		(1 << 0)
+#define  AFI_PEX_CTRL_REFCLK_EN		(1 << 3)
+
+#define RP_VEND_XP	0x00000F00
+#define  RP_VEND_XP_DL_UP	(1 << 30)
+
+#define RP_LINK_CONTROL_STATUS			0x00000090
+#define  RP_LINK_CONTROL_STATUS_LINKSTAT_MASK	0x3fff0000
+
+#define PADS_CTL_SEL		0x0000009C
+
+#define PADS_CTL		0x000000A0
+#define  PADS_CTL_IDDQ_1L	(1 << 0)
+#define  PADS_CTL_TX_DATA_EN_1L	(1 << 6)
+#define  PADS_CTL_RX_DATA_EN_1L	(1 << 10)
+
+#define PADS_PLL_CTL				0x000000B8
+#define  PADS_PLL_CTL_RST_B4SM			(1 << 1)
+#define  PADS_PLL_CTL_LOCKDET			(1 << 8)
+#define  PADS_PLL_CTL_REFCLK_MASK		(0x3 << 16)
+#define  PADS_PLL_CTL_REFCLK_INTERNAL_CML	(0 << 16)
+#define  PADS_PLL_CTL_REFCLK_INTERNAL_CMOS	(1 << 16)
+#define  PADS_PLL_CTL_REFCLK_EXTERNAL		(2 << 16)
+#define  PADS_PLL_CTL_TXCLKREF_MASK		(0x1 << 20)
+#define  PADS_PLL_CTL_TXCLKREF_DIV10		(0 << 20)
+#define  PADS_PLL_CTL_TXCLKREF_DIV5		(1 << 20)
+
+/* PMC access is required for PCIE xclk (un)clamping */
+#define PMC_SCRATCH42		0x144
+#define PMC_SCRATCH42_PCX_CLAMP	(1 << 0)
+
+static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
+
+#define pmc_writel(value, reg) \
+	__raw_writel(value, (u32)reg_pmc_base + (reg))
+#define pmc_readl(reg) \
+	__raw_readl((u32)reg_pmc_base + (reg))
+
+/*
+ * Tegra2 defines 1GB in the AXI address map for PCIe.
+ *
+ * That address space is split into different regions, with sizes and
+ * offsets as follows:
+ *
+ * 0x80000000 - 0x80003fff - PCI controller registers
+ * 0x80004000 - 0x80103fff - PCI configuration space
+ * 0x80104000 - 0x80203fff - PCI extended configuration space
+ * 0x80203fff - 0x803fffff - unused
+ * 0x80400000 - 0x8040ffff - downstream IO
+ * 0x80410000 - 0x8fffffff - unused
+ * 0x90000000 - 0x9fffffff - non-prefetchable memory
+ * 0xa0000000 - 0xbfffffff - prefetchable memory
+ */
+#define TEGRA_PCIE_BASE		0x80000000
+
+#define PCIE_REGS_SZ		SZ_16K
+#define PCIE_CFG_OFF		PCIE_REGS_SZ
+#define PCIE_CFG_SZ		SZ_1M
+#define PCIE_EXT_CFG_OFF	(PCIE_CFG_SZ + PCIE_CFG_OFF)
+#define PCIE_EXT_CFG_SZ		SZ_1M
+#define PCIE_IOMAP_SZ		(PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ)
+
+#define MMIO_BASE		(TEGRA_PCIE_BASE + SZ_4M)
+#define MMIO_SIZE		SZ_64K
+#define MEM_BASE_0		(TEGRA_PCIE_BASE + SZ_256M)
+#define MEM_SIZE_0		SZ_128M
+#define MEM_BASE_1		(MEM_BASE_0 + MEM_SIZE_0)
+#define MEM_SIZE_1		SZ_128M
+#define PREFETCH_MEM_BASE_0	(MEM_BASE_1 + MEM_SIZE_1)
+#define PREFETCH_MEM_SIZE_0	SZ_128M
+#define PREFETCH_MEM_BASE_1	(PREFETCH_MEM_BASE_0 + PREFETCH_MEM_SIZE_0)
+#define PREFETCH_MEM_SIZE_1	SZ_128M
+
+#define  PCIE_CONF_BUS(b)	((b) << 16)
+#define  PCIE_CONF_DEV(d)	((d) << 11)
+#define  PCIE_CONF_FUNC(f)	((f) << 8)
+#define  PCIE_CONF_REG(r)	\
+	(((r) & ~0x3) | (((r) < 256) ? PCIE_CFG_OFF : PCIE_EXT_CFG_OFF))
+
+struct tegra_pcie_port {
+	int			index;
+	u8			root_bus_nr;
+	void __iomem		*base;
+
+	bool			link_up;
+
+	char			io_space_name[16];
+	char			mem_space_name[16];
+	char			prefetch_space_name[20];
+	struct resource		res[3];
+};
+
+struct tegra_pcie_info {
+	struct tegra_pcie_port	port[2];
+	int			num_ports;
+
+	void __iomem		*regs;
+	struct resource		res_mmio;
+
+	struct clk		*pex_clk;
+	struct clk		*afi_clk;
+	struct clk		*pcie_xclk;
+	struct clk		*pll_e;
+};
+
+static struct tegra_pcie_info tegra_pcie = {
+	.res_mmio = {
+		.name = "PCI IO",
+		.start = MMIO_BASE,
+		.end = MMIO_BASE + MMIO_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+void __iomem *tegra_pcie_io_base;
+EXPORT_SYMBOL(tegra_pcie_io_base);
+
+static inline void afi_writel(u32 value, unsigned long offset)
+{
+	writel(value, offset + AFI_OFFSET + tegra_pcie.regs);
+}
+
+static inline u32 afi_readl(unsigned long offset)
+{
+	return readl(offset + AFI_OFFSET + tegra_pcie.regs);
+}
+
+static inline void pads_writel(u32 value, unsigned long offset)
+{
+	writel(value, offset + PADS_OFFSET + tegra_pcie.regs);
+}
+
+static inline u32 pads_readl(unsigned long offset)
+{
+	return readl(offset + PADS_OFFSET + tegra_pcie.regs);
+}
+
+static struct tegra_pcie_port *bus_to_port(int bus)
+{
+	int i;
+
+	for (i = tegra_pcie.num_ports - 1; i >= 0; i--) {
+		int rbus = tegra_pcie.port[i].root_bus_nr;
+		if (rbus != -1 && rbus == bus)
+			break;
+	}
+
+	return i >= 0 ? tegra_pcie.port + i : NULL;
+}
+
+static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 *val)
+{
+	struct tegra_pcie_port *pp = bus_to_port(bus->number);
+	void __iomem *addr;
+
+	if (pp) {
+		if (devfn != 0) {
+			*val = 0xffffffff;
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		}
+
+		addr = pp->base + (where & ~0x3);
+	} else {
+		addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
+					  PCIE_CONF_DEV(PCI_SLOT(devfn)) +
+					  PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
+					  PCIE_CONF_REG(where));
+	}
+
+	*val = readl(addr);
+
+	if (size == 1)
+		*val = (*val >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8 * (where & 3))) & 0xffff;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn,
+				 int where, int size, u32 val)
+{
+	struct tegra_pcie_port *pp = bus_to_port(bus->number);
+	void __iomem *addr;
+
+	u32 mask;
+	u32 tmp;
+
+	if (pp) {
+		if (devfn != 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+		addr = pp->base + (where & ~0x3);
+	} else {
+		addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) +
+					  PCIE_CONF_DEV(PCI_SLOT(devfn)) +
+					  PCIE_CONF_FUNC(PCI_FUNC(devfn)) +
+					  PCIE_CONF_REG(where));
+	}
+
+	if (size == 4) {
+		writel(val, addr);
+		return PCIBIOS_SUCCESSFUL;
+	}
+
+	if (size == 2)
+		mask = ~(0xffff << ((where & 0x3) * 8));
+	else if (size == 1)
+		mask = ~(0xff << ((where & 0x3) * 8));
+	else
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	tmp = readl(addr) & mask;
+	tmp |= val << ((where & 0x3) * 8);
+	writel(tmp, addr);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops tegra_pcie_ops = {
+	.read	= tegra_pcie_read_conf,
+	.write	= tegra_pcie_write_conf,
+};
+
+static void __devinit tegra_pcie_fixup_bridge(struct pci_dev *dev)
+{
+	u16 reg;
+
+	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
+		pci_read_config_word(dev, PCI_COMMAND, &reg);
+		reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+			PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
+		pci_write_config_word(dev, PCI_COMMAND, reg);
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge);
+
+/* Tegra PCIE root complex wrongly reports device class */
+static void __devinit tegra_pcie_fixup_class(struct pci_dev *dev)
+{
+	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
+
+/* Tegra PCIE requires relaxed ordering */
+static void __devinit tegra_pcie_relax_enable(struct pci_dev *dev)
+{
+	u16 val16;
+	int pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+
+	if (pos <= 0) {
+		dev_err(&dev->dev, "skipping relaxed ordering fixup\n");
+		return;
+	}
+
+	pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &val16);
+	val16 |= PCI_EXP_DEVCTL_RELAX_EN;
+	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, val16);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable);
+
+static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct tegra_pcie_port *pp;
+
+	if (nr >= tegra_pcie.num_ports)
+		return 0;
+
+	pp = tegra_pcie.port + nr;
+	pp->root_bus_nr = sys->busnr;
+
+	/*
+	 * IORESOURCE_IO
+	 */
+	snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+		 "PCIe %d I/O", pp->index);
+	pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+	pp->res[0].name = pp->io_space_name;
+	if (pp->index == 0) {
+		pp->res[0].start = PCIBIOS_MIN_IO;
+		pp->res[0].end = pp->res[0].start + SZ_32K - 1;
+	} else {
+		pp->res[0].start = PCIBIOS_MIN_IO + SZ_32K;
+		pp->res[0].end = IO_SPACE_LIMIT;
+	}
+	pp->res[0].flags = IORESOURCE_IO;
+	if (request_resource(&ioport_resource, &pp->res[0]))
+		panic("Request PCIe IO resource failed\n");
+	sys->resource[0] = &pp->res[0];
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+		 "PCIe %d MEM", pp->index);
+	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+	pp->res[1].name = pp->mem_space_name;
+	if (pp->index == 0) {
+		pp->res[1].start = MEM_BASE_0;
+		pp->res[1].end = pp->res[1].start + MEM_SIZE_0 - 1;
+	} else {
+		pp->res[1].start = MEM_BASE_1;
+		pp->res[1].end = pp->res[1].start + MEM_SIZE_1 - 1;
+	}
+	pp->res[1].flags = IORESOURCE_MEM;
+	if (request_resource(&iomem_resource, &pp->res[1]))
+		panic("Request PCIe Memory resource failed\n");
+	sys->resource[1] = &pp->res[1];
+
+	/*
+	 * IORESOURCE_MEM | IORESOURCE_PREFETCH
+	 */
+	snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name),
+		 "PCIe %d PREFETCH MEM", pp->index);
+	pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0;
+	pp->res[2].name = pp->prefetch_space_name;
+	if (pp->index == 0) {
+		pp->res[2].start = PREFETCH_MEM_BASE_0;
+		pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_0 - 1;
+	} else {
+		pp->res[2].start = PREFETCH_MEM_BASE_1;
+		pp->res[2].end = pp->res[2].start + PREFETCH_MEM_SIZE_1 - 1;
+	}
+	pp->res[2].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
+	if (request_resource(&iomem_resource, &pp->res[2]))
+		panic("Request PCIe Prefetch Memory resource failed\n");
+	sys->resource[2] = &pp->res[2];
+
+	return 1;
+}
+
+static int tegra_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return INT_PCIE_INTR;
+}
+
+static struct pci_bus __init *tegra_pcie_scan_bus(int nr,
+						  struct pci_sys_data *sys)
+{
+	struct tegra_pcie_port *pp;
+
+	if (nr >= tegra_pcie.num_ports)
+		return 0;
+
+	pp = tegra_pcie.port + nr;
+	pp->root_bus_nr = sys->busnr;
+
+	return pci_scan_bus(sys->busnr, &tegra_pcie_ops, sys);
+}
+
+static struct hw_pci tegra_pcie_hw __initdata = {
+	.nr_controllers	= 2,
+	.setup		= tegra_pcie_setup,
+	.scan		= tegra_pcie_scan_bus,
+	.swizzle	= pci_std_swizzle,
+	.map_irq	= tegra_pcie_map_irq,
+};
+
+
+static irqreturn_t tegra_pcie_isr(int irq, void *arg)
+{
+	const char *err_msg[] = {
+		"Unknown",
+		"AXI slave error",
+		"AXI decode error",
+		"Target abort",
+		"Master abort",
+		"Invalid write",
+		"Response decoding error",
+		"AXI response decoding error",
+		"Transcation timeout",
+	};
+
+	u32 code, signature;
+
+	code = afi_readl(AFI_INTR_CODE) & AFI_INTR_CODE_MASK;
+	signature = afi_readl(AFI_INTR_SIGNATURE);
+	afi_writel(0, AFI_INTR_CODE);
+
+	if (code == AFI_INTR_LEGACY)
+		return IRQ_NONE;
+
+	if (code >= ARRAY_SIZE(err_msg))
+		code = 0;
+
+	/*
+	 * do not pollute kernel log with master abort reports since they
+	 * happen a lot during enumeration
+	 */
+	if (code == AFI_INTR_MASTER_ABORT)
+		pr_debug("PCIE: %s, signature: %08x\n", err_msg[code], signature);
+	else
+		pr_err("PCIE: %s, signature: %08x\n", err_msg[code], signature);
+
+	return IRQ_HANDLED;
+}
+
+static void tegra_pcie_setup_translations(void)
+{
+	u32 fpci_bar;
+	u32 size;
+	u32 axi_address;
+
+	/* Bar 0: config Bar */
+	fpci_bar = ((u32)0xfdff << 16);
+	size = PCIE_CFG_SZ;
+	axi_address = TEGRA_PCIE_BASE + PCIE_CFG_OFF;
+	afi_writel(axi_address, AFI_AXI_BAR0_START);
+	afi_writel(size >> 12, AFI_AXI_BAR0_SZ);
+	afi_writel(fpci_bar, AFI_FPCI_BAR0);
+
+	/* Bar 1: extended config Bar */
+	fpci_bar = ((u32)0xfe1 << 20);
+	size = PCIE_EXT_CFG_SZ;
+	axi_address = TEGRA_PCIE_BASE + PCIE_EXT_CFG_OFF;
+	afi_writel(axi_address, AFI_AXI_BAR1_START);
+	afi_writel(size >> 12, AFI_AXI_BAR1_SZ);
+	afi_writel(fpci_bar, AFI_FPCI_BAR1);
+
+	/* Bar 2: downstream IO bar */
+	fpci_bar = ((__u32)0xfdfc << 16);
+	size = MMIO_SIZE;
+	axi_address = MMIO_BASE;
+	afi_writel(axi_address, AFI_AXI_BAR2_START);
+	afi_writel(size >> 12, AFI_AXI_BAR2_SZ);
+	afi_writel(fpci_bar, AFI_FPCI_BAR2);
+
+	/* Bar 3: prefetchable memory BAR */
+	fpci_bar = (((PREFETCH_MEM_BASE_0 >> 12) & 0x0fffffff) << 4) | 0x1;
+	size =  PREFETCH_MEM_SIZE_0 +  PREFETCH_MEM_SIZE_1;
+	axi_address = PREFETCH_MEM_BASE_0;
+	afi_writel(axi_address, AFI_AXI_BAR3_START);
+	afi_writel(size >> 12, AFI_AXI_BAR3_SZ);
+	afi_writel(fpci_bar, AFI_FPCI_BAR3);
+
+	/* Bar 4: non prefetchable memory BAR */
+	fpci_bar = (((MEM_BASE_0 >> 12)	& 0x0FFFFFFF) << 4) | 0x1;
+	size = MEM_SIZE_0 + MEM_SIZE_1;
+	axi_address = MEM_BASE_0;
+	afi_writel(axi_address, AFI_AXI_BAR4_START);
+	afi_writel(size >> 12, AFI_AXI_BAR4_SZ);
+	afi_writel(fpci_bar, AFI_FPCI_BAR4);
+
+	/* Bar 5: NULL out the remaining BAR as it is not used */
+	fpci_bar = 0;
+	size = 0;
+	axi_address = 0;
+	afi_writel(axi_address, AFI_AXI_BAR5_START);
+	afi_writel(size >> 12, AFI_AXI_BAR5_SZ);
+	afi_writel(fpci_bar, AFI_FPCI_BAR5);
+
+	/* map all upstream transactions as uncached */
+	afi_writel(PHYS_OFFSET, AFI_CACHE_BAR0_ST);
+	afi_writel(0, AFI_CACHE_BAR0_SZ);
+	afi_writel(0, AFI_CACHE_BAR1_ST);
+	afi_writel(0, AFI_CACHE_BAR1_SZ);
+
+	/* No MSI */
+	afi_writel(0, AFI_MSI_FPCI_BAR_ST);
+	afi_writel(0, AFI_MSI_BAR_SZ);
+	afi_writel(0, AFI_MSI_AXI_BAR_ST);
+	afi_writel(0, AFI_MSI_BAR_SZ);
+}
+
+static void tegra_pcie_enable_controller(void)
+{
+	u32 val, reg;
+	int i;
+
+	/* Enable slot clock and pulse the reset signals */
+	for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) {
+		val = afi_readl(reg) |  AFI_PEX_CTRL_REFCLK_EN;
+		afi_writel(val, reg);
+		val &= ~AFI_PEX_CTRL_RST;
+		afi_writel(val, reg);
+
+		val = afi_readl(reg) | AFI_PEX_CTRL_RST;
+		afi_writel(val, reg);
+	}
+
+	/* Enable dual controller and both ports */
+	val = afi_readl(AFI_PCIE_CONFIG);
+	val &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE |
+		 AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE |
+		 AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK);
+	val |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL;
+	afi_writel(val, AFI_PCIE_CONFIG);
+
+	val = afi_readl(AFI_FUSE) & ~AFI_FUSE_PCIE_T0_GEN2_DIS;
+	afi_writel(val, AFI_FUSE);
+
+	/* Initialze internal PHY, enable up to 16 PCIE lanes */
+	pads_writel(0x0, PADS_CTL_SEL);
+
+	/* override IDDQ to 1 on all 4 lanes */
+	val = pads_readl(PADS_CTL) | PADS_CTL_IDDQ_1L;
+	pads_writel(val, PADS_CTL);
+
+	/*
+	 * set up PHY PLL inputs select PLLE output as refclock,
+	 * set TX ref sel to div10 (not div5)
+	 */
+	val = pads_readl(PADS_PLL_CTL);
+	val &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK);
+	val |= (PADS_PLL_CTL_REFCLK_INTERNAL_CML | PADS_PLL_CTL_TXCLKREF_DIV10);
+	pads_writel(val, PADS_PLL_CTL);
+
+	/* take PLL out of reset  */
+	val = pads_readl(PADS_PLL_CTL) | PADS_PLL_CTL_RST_B4SM;
+	pads_writel(val, PADS_PLL_CTL);
+
+	/*
+	 * Hack, set the clock voltage to the DEFAULT provided by hw folks.
+	 * This doesn't exist in the documentation
+	 */
+	pads_writel(0xfa5cfa5c, 0xc8);
+
+	/* Wait for the PLL to lock */
+	do {
+		val = pads_readl(PADS_PLL_CTL);
+	} while (!(val & PADS_PLL_CTL_LOCKDET));
+
+	/* turn off IDDQ override */
+	val = pads_readl(PADS_CTL) & ~PADS_CTL_IDDQ_1L;
+	pads_writel(val, PADS_CTL);
+
+	/* enable TX/RX data */
+	val = pads_readl(PADS_CTL);
+	val |= (PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L);
+	pads_writel(val, PADS_CTL);
+
+	/* Take the PCIe interface module out of reset */
+	tegra_periph_reset_deassert(tegra_pcie.pcie_xclk);
+
+	/* Finally enable PCIe */
+	val = afi_readl(AFI_CONFIGURATION) | AFI_CONFIGURATION_EN_FPCI;
+	afi_writel(val, AFI_CONFIGURATION);
+
+	val = (AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR |
+	       AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR |
+	       AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR);
+	afi_writel(val, AFI_AFI_INTR_ENABLE);
+	afi_writel(0xffffffff, AFI_SM_INTR_ENABLE);
+
+	/* FIXME: No MSI for now, only INT */
+	afi_writel(AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK);
+
+	/* Disable all execptions */
+	afi_writel(0, AFI_FPCI_ERROR_MASKS);
+
+	return;
+}
+
+static void tegra_pcie_xclk_clamp(bool clamp)
+{
+	u32 reg;
+
+	reg = pmc_readl(PMC_SCRATCH42) & ~PMC_SCRATCH42_PCX_CLAMP;
+
+	if (clamp)
+		reg |= PMC_SCRATCH42_PCX_CLAMP;
+
+	pmc_writel(reg, PMC_SCRATCH42);
+}
+
+static int tegra_pcie_power_on(void)
+{
+	tegra_pcie_xclk_clamp(true);
+	tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
+	tegra_pcie_xclk_clamp(false);
+
+	clk_enable(tegra_pcie.afi_clk);
+	clk_enable(tegra_pcie.pex_clk);
+	return clk_enable(tegra_pcie.pll_e);
+}
+
+static void tegra_pcie_power_off(void)
+{
+	tegra_periph_reset_assert(tegra_pcie.pcie_xclk);
+	tegra_periph_reset_assert(tegra_pcie.afi_clk);
+	tegra_periph_reset_assert(tegra_pcie.pex_clk);
+
+	tegra_pcie_xclk_clamp(true);
+}
+
+static int tegra_pcie_clocks_get(void)
+{
+	int err;
+
+	tegra_pcie.pex_clk = clk_get(NULL, "pex");
+	if (IS_ERR(tegra_pcie.pex_clk))
+		return PTR_ERR(tegra_pcie.pex_clk);
+
+	tegra_pcie.afi_clk = clk_get(NULL, "afi");
+	if (IS_ERR(tegra_pcie.afi_clk)) {
+		err = PTR_ERR(tegra_pcie.afi_clk);
+		goto err_afi_clk;
+	}
+
+	tegra_pcie.pcie_xclk = clk_get(NULL, "pcie_xclk");
+	if (IS_ERR(tegra_pcie.pcie_xclk)) {
+		err =  PTR_ERR(tegra_pcie.pcie_xclk);
+		goto err_pcie_xclk;
+	}
+
+	tegra_pcie.pll_e = clk_get_sys(NULL, "pll_e");
+	if (IS_ERR(tegra_pcie.pll_e)) {
+		err = PTR_ERR(tegra_pcie.pll_e);
+		goto err_pll_e;
+	}
+
+	return 0;
+
+err_pll_e:
+	clk_put(tegra_pcie.pcie_xclk);
+err_pcie_xclk:
+	clk_put(tegra_pcie.afi_clk);
+err_afi_clk:
+	clk_put(tegra_pcie.pex_clk);
+
+	return err;
+}
+
+static void tegra_pcie_clocks_put(void)
+{
+	clk_put(tegra_pcie.pll_e);
+	clk_put(tegra_pcie.pcie_xclk);
+	clk_put(tegra_pcie.afi_clk);
+	clk_put(tegra_pcie.pex_clk);
+}
+
+static int __init tegra_pcie_get_resources(void)
+{
+	struct resource *res_mmio = &tegra_pcie.res_mmio;
+	int err;
+
+	err = tegra_pcie_clocks_get();
+	if (err) {
+		pr_err("PCIE: failed to get clocks: %d\n", err);
+		return err;
+	}
+
+	err = tegra_pcie_power_on();
+	if (err) {
+		pr_err("PCIE: failed to power up: %d\n", err);
+		goto err_pwr_on;
+	}
+
+	tegra_pcie.regs = ioremap_nocache(TEGRA_PCIE_BASE, PCIE_IOMAP_SZ);
+	if (tegra_pcie.regs == NULL) {
+		pr_err("PCIE: Failed to map PCI/AFI registers\n");
+		err = -ENOMEM;
+		goto err_map_reg;
+	}
+
+	err = request_resource(&iomem_resource, res_mmio);
+	if (err) {
+		pr_err("PCIE: Failed to request resources: %d\n", err);
+		goto err_req_io;
+	}
+
+	tegra_pcie_io_base = ioremap_nocache(res_mmio->start,
+					     resource_size(res_mmio));
+	if (tegra_pcie_io_base == NULL) {
+		pr_err("PCIE: Failed to map IO\n");
+		err = -ENOMEM;
+		goto err_map_io;
+	}
+
+	err = request_irq(INT_PCIE_INTR, tegra_pcie_isr,
+			  IRQF_SHARED, "PCIE", &tegra_pcie);
+	if (err) {
+		pr_err("PCIE: Failed to register IRQ: %d\n", err);
+		goto err_irq;
+	}
+	set_irq_flags(INT_PCIE_INTR, IRQF_VALID);
+
+	return 0;
+
+err_irq:
+	iounmap(tegra_pcie_io_base);
+err_map_io:
+	release_resource(&tegra_pcie.res_mmio);
+err_req_io:
+	iounmap(tegra_pcie.regs);
+err_map_reg:
+	tegra_pcie_power_off();
+err_pwr_on:
+	tegra_pcie_clocks_put();
+
+	return err;
+}
+
+/*
+ * FIXME: If there are no PCIe cards attached, then calling this function
+ * can result in the increase of the bootup time as there are big timeout
+ * loops.
+ */
+#define TEGRA_PCIE_LINKUP_TIMEOUT	200	/* up to 1.2 seconds */
+static bool tegra_pcie_check_link(struct tegra_pcie_port *pp, int idx,
+				  u32 reset_reg)
+{
+	u32 reg;
+	int retries = 3;
+	int timeout;
+
+	do {
+		timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
+		while (timeout) {
+			reg = readl(pp->base + RP_VEND_XP);
+
+			if (reg & RP_VEND_XP_DL_UP)
+				break;
+
+			mdelay(1);
+			timeout--;
+		}
+
+		if (!timeout)  {
+			pr_err("PCIE: port %d: link down, retrying\n", idx);
+			goto retry;
+		}
+
+		timeout = TEGRA_PCIE_LINKUP_TIMEOUT;
+		while (timeout) {
+			reg = readl(pp->base + RP_LINK_CONTROL_STATUS);
+
+			if (reg & 0x20000000)
+				return true;
+
+			mdelay(1);
+			timeout--;
+		}
+
+retry:
+		/* Pulse the PEX reset */
+		reg = afi_readl(reset_reg) | AFI_PEX_CTRL_RST;
+		afi_writel(reg, reset_reg);
+		mdelay(1);
+		reg = afi_readl(reset_reg) & ~AFI_PEX_CTRL_RST;
+		afi_writel(reg, reset_reg);
+
+		retries--;
+	} while (retries);
+
+	return false;
+}
+
+static void __init tegra_pcie_add_port(int index, u32 offset, u32 reset_reg)
+{
+	struct tegra_pcie_port *pp;
+
+	pp = tegra_pcie.port + tegra_pcie.num_ports;
+
+	pp->index = -1;
+	pp->base = tegra_pcie.regs + offset;
+	pp->link_up = tegra_pcie_check_link(pp, index, reset_reg);
+
+	if (!pp->link_up) {
+		pp->base = NULL;
+		printk(KERN_INFO "PCIE: port %d: link down, ignoring\n", index);
+		return;
+	}
+
+	tegra_pcie.num_ports++;
+	pp->index = index;
+	pp->root_bus_nr = -1;
+	memset(pp->res, 0, sizeof(pp->res));
+}
+
+int __init tegra_pcie_init(bool init_port0, bool init_port1)
+{
+	int err;
+
+	if (!(init_port0 || init_port1))
+		return -ENODEV;
+
+	err = tegra_pcie_get_resources();
+	if (err)
+		return err;
+
+	tegra_pcie_enable_controller();
+
+	/* setup the AFI address translations */
+	tegra_pcie_setup_translations();
+
+	if (init_port0)
+		tegra_pcie_add_port(0, RP0_OFFSET, AFI_PEX0_CTRL);
+
+	if (init_port1)
+		tegra_pcie_add_port(1, RP1_OFFSET, AFI_PEX1_CTRL);
+
+	pci_common_init(&tegra_pcie_hw);
+
+	return 0;
+}
diff --git a/arch/arm/mach-tegra/pinmux-t2-tables.c b/arch/arm/mach-tegra/pinmux-t2-tables.c
new file mode 100644
index 000000000000..a6ea34e782dc
--- /dev/null
+++ b/arch/arm/mach-tegra/pinmux-t2-tables.c
@@ -0,0 +1,260 @@
+/*
+ * linux/arch/arm/mach-tegra/pinmux-t2-tables.c
+ *
+ * Common pinmux configurations for Tegra 2 SoCs
+ *
+ * Copyright (C) 2010 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <mach/iomap.h>
+#include <mach/pinmux.h>
+
+#define DRIVE_PINGROUP(pg_name, r)				\
+	[TEGRA_DRIVE_PINGROUP_ ## pg_name] = {			\
+		.name = #pg_name,				\
+		.reg = r					\
+	}
+
+const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = {
+	DRIVE_PINGROUP(AO1,		0x868),
+	DRIVE_PINGROUP(AO2,		0x86c),
+	DRIVE_PINGROUP(AT1,		0x870),
+	DRIVE_PINGROUP(AT2,		0x874),
+	DRIVE_PINGROUP(CDEV1,		0x878),
+	DRIVE_PINGROUP(CDEV2,		0x87c),
+	DRIVE_PINGROUP(CSUS,		0x880),
+	DRIVE_PINGROUP(DAP1,		0x884),
+	DRIVE_PINGROUP(DAP2,		0x888),
+	DRIVE_PINGROUP(DAP3,		0x88c),
+	DRIVE_PINGROUP(DAP4,		0x890),
+	DRIVE_PINGROUP(DBG,		0x894),
+	DRIVE_PINGROUP(LCD1,		0x898),
+	DRIVE_PINGROUP(LCD2,		0x89c),
+	DRIVE_PINGROUP(SDMMC2,		0x8a0),
+	DRIVE_PINGROUP(SDMMC3,		0x8a4),
+	DRIVE_PINGROUP(SPI,		0x8a8),
+	DRIVE_PINGROUP(UAA,		0x8ac),
+	DRIVE_PINGROUP(UAB,		0x8b0),
+	DRIVE_PINGROUP(UART2,		0x8b4),
+	DRIVE_PINGROUP(UART3,		0x8b8),
+	DRIVE_PINGROUP(VI1,		0x8bc),
+	DRIVE_PINGROUP(VI2,		0x8c0),
+	DRIVE_PINGROUP(XM2A,		0x8c4),
+	DRIVE_PINGROUP(XM2C,		0x8c8),
+	DRIVE_PINGROUP(XM2D,		0x8cc),
+	DRIVE_PINGROUP(XM2CLK,		0x8d0),
+	DRIVE_PINGROUP(MEMCOMP,		0x8d4),
+};
+
+#define PINGROUP(pg_name, vdd, f0, f1, f2, f3, f_safe,		\
+		 tri_r, tri_b, mux_r, mux_b, pupd_r, pupd_b)	\
+	[TEGRA_PINGROUP_ ## pg_name] = {			\
+		.name = #pg_name,				\
+		.vddio = TEGRA_VDDIO_ ## vdd,			\
+		.funcs = {					\
+			TEGRA_MUX_ ## f0,			\
+			TEGRA_MUX_ ## f1,			\
+			TEGRA_MUX_ ## f2,			\
+			TEGRA_MUX_ ## f3,			\
+		},						\
+		.func_safe = TEGRA_MUX_ ## f_safe,		\
+		.tri_reg = tri_r,				\
+		.tri_bit = tri_b,				\
+		.mux_reg = mux_r,				\
+		.mux_bit = mux_b,				\
+		.pupd_reg = pupd_r,				\
+		.pupd_bit = pupd_b,				\
+	}
+
+const struct tegra_pingroup_desc tegra_soc_pingroups[TEGRA_MAX_PINGROUP] = {
+	PINGROUP(ATA,   NAND,  IDE,       NAND,      GMI,       RSVD,          IDE,       0x14, 0,  0x80, 24, 0xA0, 0),
+	PINGROUP(ATB,   NAND,  IDE,       NAND,      GMI,       SDIO4,         IDE,       0x14, 1,  0x80, 16, 0xA0, 2),
+	PINGROUP(ATC,   NAND,  IDE,       NAND,      GMI,       SDIO4,         IDE,       0x14, 2,  0x80, 22, 0xA0, 4),
+	PINGROUP(ATD,   NAND,  IDE,       NAND,      GMI,       SDIO4,         IDE,       0x14, 3,  0x80, 20, 0xA0, 6),
+	PINGROUP(ATE,   NAND,  IDE,       NAND,      GMI,       RSVD,          IDE,       0x18, 25, 0x80, 12, 0xA0, 8),
+	PINGROUP(CDEV1, AUDIO, OSC,       PLLA_OUT,  PLLM_OUT1, AUDIO_SYNC,    OSC,       0x14, 4,  0x88, 2,  0xA8, 0),
+	PINGROUP(CDEV2, AUDIO, OSC,       AHB_CLK,   APB_CLK,   PLLP_OUT4,     OSC,       0x14, 5,  0x88, 4,  0xA8, 2),
+	PINGROUP(CRTP,  LCD,   CRT,       RSVD,      RSVD,      RSVD,          RSVD,      0x20, 14, 0x98, 20, 0xA4, 24),
+	PINGROUP(CSUS,  VI,    PLLC_OUT1, PLLP_OUT2, PLLP_OUT3, VI_SENSOR_CLK, PLLC_OUT1, 0x14, 6,  0x88, 6,  0xAC, 24),
+	PINGROUP(DAP1,  AUDIO, DAP1,      RSVD,      GMI,       SDIO2,         DAP1,      0x14, 7,  0x88, 20, 0xA0, 10),
+	PINGROUP(DAP2,  AUDIO, DAP2,      TWC,       RSVD,      GMI,           DAP2,      0x14, 8,  0x88, 22, 0xA0, 12),
+	PINGROUP(DAP3,  BB,    DAP3,      RSVD,      RSVD,      RSVD,          DAP3,      0x14, 9,  0x88, 24, 0xA0, 14),
+	PINGROUP(DAP4,  UART,  DAP4,      RSVD,      GMI,       RSVD,          DAP4,      0x14, 10, 0x88, 26, 0xA0, 16),
+	PINGROUP(DDC,   LCD,   I2C2,      RSVD,      RSVD,      RSVD,          RSVD4,     0x18, 31, 0x88, 0,  0xB0, 28),
+	PINGROUP(DTA,   VI,    RSVD,      SDIO2,     VI,        RSVD,          RSVD4,     0x14, 11, 0x84, 20, 0xA0, 18),
+	PINGROUP(DTB,   VI,    RSVD,      RSVD,      VI,        SPI1,          RSVD1,     0x14, 12, 0x84, 22, 0xA0, 20),
+	PINGROUP(DTC,   VI,    RSVD,      RSVD,      VI,        RSVD,          RSVD1,     0x14, 13, 0x84, 26, 0xA0, 22),
+	PINGROUP(DTD,   VI,    RSVD,      SDIO2,     VI,        RSVD,          RSVD1,     0x14, 14, 0x84, 28, 0xA0, 24),
+	PINGROUP(DTE,   VI,    RSVD,      RSVD,      VI,        SPI1,          RSVD1,     0x14, 15, 0x84, 30, 0xA0, 26),
+	PINGROUP(DTF,   VI,    I2C3,      RSVD,      VI,        RSVD,          RSVD4,     0x20, 12, 0x98, 30, 0xA0, 28),
+	PINGROUP(GMA,   NAND,  UARTE,     SPI3,      GMI,       SDIO4,         SPI3,      0x14, 28, 0x84, 0,  0xB0, 20),
+	PINGROUP(GMB,   NAND,  IDE,       NAND,      GMI,       GMI_INT,       GMI,       0x18, 29, 0x88, 28, 0xB0, 22),
+	PINGROUP(GMC,   NAND,  UARTD,     SPI4,      GMI,       SFLASH,        SPI4,      0x14, 29, 0x84, 2,  0xB0, 24),
+	PINGROUP(GMD,   NAND,  RSVD,      NAND,      GMI,       SFLASH,        GMI,       0x18, 30, 0x88, 30, 0xB0, 26),
+	PINGROUP(GME,   NAND,  RSVD,      DAP5,      GMI,       SDIO4,         GMI,       0x18, 0,  0x8C, 0,  0xA8, 24),
+	PINGROUP(GPU,   UART,  PWM,       UARTA,     GMI,       RSVD,          RSVD4,     0x14, 16, 0x8C, 4,  0xA4, 20),
+	PINGROUP(GPU7,  SYS,   RTCK,      RSVD,      RSVD,      RSVD,          RTCK,      0x20, 11, 0x98, 28, 0xA4, 6),
+	PINGROUP(GPV,   SD,    PCIE,      RSVD,      RSVD,      RSVD,          PCIE,      0x14, 17, 0x8C, 2,  0xA0, 30),
+	PINGROUP(HDINT, LCD,   HDMI,      RSVD,      RSVD,      RSVD,          HDMI,      0x1C, 23, 0x84, 4,  0xAC, 22),
+	PINGROUP(I2CP,  SYS,   I2C,       RSVD,      RSVD,      RSVD,          RSVD4,     0x14, 18, 0x88, 8,  0xA4, 2),
+	PINGROUP(IRRX,  UART,  UARTA,     UARTB,     GMI,       SPI4,          UARTB,     0x14, 20, 0x88, 18, 0xA8, 22),
+	PINGROUP(IRTX,  UART,  UARTA,     UARTB,     GMI,       SPI4,          UARTB,     0x14, 19, 0x88, 16, 0xA8, 20),
+	PINGROUP(KBCA,  SYS,   KBC,       NAND,      SDIO2,     EMC_TEST0_DLL, KBC,       0x14, 22, 0x88, 10, 0xA4, 8),
+	PINGROUP(KBCB,  SYS,   KBC,       NAND,      SDIO2,     MIO,           KBC,       0x14, 21, 0x88, 12, 0xA4, 10),
+	PINGROUP(KBCC,  SYS,   KBC,       NAND,      TRACE,     EMC_TEST1_DLL, KBC,       0x18, 26, 0x88, 14, 0xA4, 12),
+	PINGROUP(KBCD,  SYS,   KBC,       NAND,      SDIO2,     MIO,           KBC,       0x20, 10, 0x98, 26, 0xA4, 14),
+	PINGROUP(KBCE,  SYS,   KBC,       NAND,      OWR,       RSVD,          KBC,       0x14, 26, 0x80, 28, 0xB0, 2),
+	PINGROUP(KBCF,  SYS,   KBC,       NAND,      TRACE,     MIO,           KBC,       0x14, 27, 0x80, 26, 0xB0, 0),
+	PINGROUP(LCSN,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          RSVD4,     0x1C, 31, 0x90, 12, 0xAC, 20),
+	PINGROUP(LD0,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 0,  0x94, 0,  0xAC, 12),
+	PINGROUP(LD1,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 1,  0x94, 2,  0xAC, 12),
+	PINGROUP(LD10,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 10, 0x94, 20, 0xAC, 12),
+	PINGROUP(LD11,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 11, 0x94, 22, 0xAC, 12),
+	PINGROUP(LD12,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 12, 0x94, 24, 0xAC, 12),
+	PINGROUP(LD13,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 13, 0x94, 26, 0xAC, 12),
+	PINGROUP(LD14,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 14, 0x94, 28, 0xAC, 12),
+	PINGROUP(LD15,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 15, 0x94, 30, 0xAC, 12),
+	PINGROUP(LD16,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 16, 0x98, 0,  0xAC, 12),
+	PINGROUP(LD17,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 17, 0x98, 2,  0xAC, 12),
+	PINGROUP(LD2,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 2,  0x94, 4,  0xAC, 12),
+	PINGROUP(LD3,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 3,  0x94, 6,  0xAC, 12),
+	PINGROUP(LD4,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 4,  0x94, 8,  0xAC, 12),
+	PINGROUP(LD5,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 5,  0x94, 10, 0xAC, 12),
+	PINGROUP(LD6,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 6,  0x94, 12, 0xAC, 12),
+	PINGROUP(LD7,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 7,  0x94, 14, 0xAC, 12),
+	PINGROUP(LD8,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 8,  0x94, 16, 0xAC, 12),
+	PINGROUP(LD9,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 9,  0x94, 18, 0xAC, 12),
+	PINGROUP(LDC,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 30, 0x90, 14, 0xAC, 20),
+	PINGROUP(LDI,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x20, 6,  0x98, 16, 0xAC, 18),
+	PINGROUP(LHP0,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 18, 0x98, 10, 0xAC, 16),
+	PINGROUP(LHP1,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 19, 0x98, 4,  0xAC, 14),
+	PINGROUP(LHP2,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 20, 0x98, 6,  0xAC, 14),
+	PINGROUP(LHS,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x20, 7,  0x90, 22, 0xAC, 22),
+	PINGROUP(LM0,   LCD,   DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          RSVD4,     0x1C, 24, 0x90, 26, 0xAC, 22),
+	PINGROUP(LM1,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      CRT,           RSVD3,     0x1C, 25, 0x90, 28, 0xAC, 22),
+	PINGROUP(LPP,   LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x20, 8,  0x98, 14, 0xAC, 18),
+	PINGROUP(LPW0,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x20, 3,  0x90, 0,  0xAC, 20),
+	PINGROUP(LPW1,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x20, 4,  0x90, 2,  0xAC, 20),
+	PINGROUP(LPW2,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x20, 5,  0x90, 4,  0xAC, 20),
+	PINGROUP(LSC0,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 27, 0x90, 18, 0xAC, 22),
+	PINGROUP(LSC1,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x1C, 28, 0x90, 20, 0xAC, 20),
+	PINGROUP(LSCK,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x1C, 29, 0x90, 16, 0xAC, 20),
+	PINGROUP(LSDA,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          DISPLAYA,  0x20, 1,  0x90, 8,  0xAC, 20),
+	PINGROUP(LSDI,  LCD,   DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          DISPLAYA,  0x20, 2,  0x90, 6,  0xAC, 20),
+	PINGROUP(LSPI,  LCD,   DISPLAYA,  DISPLAYB,  XIO,       HDMI,          DISPLAYA,  0x20, 0,  0x90, 10, 0xAC, 22),
+	PINGROUP(LVP0,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 21, 0x90, 30, 0xAC, 22),
+	PINGROUP(LVP1,  LCD,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          RSVD4,     0x1C, 22, 0x98, 8,  0xAC, 16),
+	PINGROUP(LVS,   LCD,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          RSVD4,     0x1C, 26, 0x90, 24, 0xAC, 22),
+	PINGROUP(OWC,   SYS,   OWR,       RSVD,      RSVD,      RSVD,          OWR,       0x14, 31, 0x84, 8,  0xB0, 30),
+	PINGROUP(PMC,   SYS,   PWR_ON,    PWR_INTR,  RSVD,      RSVD,          PWR_ON,    0x14, 23, 0x98, 18, -1,   -1),
+	PINGROUP(PTA,   NAND,  I2C2,      HDMI,      GMI,       RSVD,          RSVD4,     0x14, 24, 0x98, 22, 0xA4, 4),
+	PINGROUP(RM,    UART,  I2C,       RSVD,      RSVD,      RSVD,          RSVD4,     0x14, 25, 0x80, 14, 0xA4, 0),
+	PINGROUP(SDB,   SD,    UARTA,     PWM,       SDIO3,     SPI2,          PWM,       0x20, 15, 0x8C, 10, -1,   -1),
+	PINGROUP(SDC,   SD,    PWM,       TWC,       SDIO3,     SPI3,          TWC,       0x18, 1,  0x8C, 12, 0xAC, 28),
+	PINGROUP(SDD,   SD,    UARTA,     PWM,       SDIO3,     SPI3,          PWM,       0x18, 2,  0x8C, 14, 0xAC, 30),
+	PINGROUP(SDIO1, BB,    SDIO1,     RSVD,      UARTE,     UARTA,         RSVD2,     0x14, 30, 0x80, 30, 0xB0, 18),
+	PINGROUP(SLXA,  SD,    PCIE,      SPI4,      SDIO3,     SPI2,          PCIE,      0x18, 3,  0x84, 6,  0xA4, 22),
+	PINGROUP(SLXC,  SD,    SPDIF,     SPI4,      SDIO3,     SPI2,          SPI4,      0x18, 5,  0x84, 10, 0xA4, 26),
+	PINGROUP(SLXD,  SD,    SPDIF,     SPI4,      SDIO3,     SPI2,          SPI4,      0x18, 6,  0x84, 12, 0xA4, 28),
+	PINGROUP(SLXK,  SD,    PCIE,      SPI4,      SDIO3,     SPI2,          PCIE,      0x18, 7,  0x84, 14, 0xA4, 30),
+	PINGROUP(SPDI,  AUDIO, SPDIF,     RSVD,      I2C,       SDIO2,         RSVD2,     0x18, 8,  0x8C, 8,  0xA4, 16),
+	PINGROUP(SPDO,  AUDIO, SPDIF,     RSVD,      I2C,       SDIO2,         RSVD2,     0x18, 9,  0x8C, 6,  0xA4, 18),
+	PINGROUP(SPIA,  AUDIO, SPI1,      SPI2,      SPI3,      GMI,           GMI,       0x18, 10, 0x8C, 30, 0xA8, 4),
+	PINGROUP(SPIB,  AUDIO, SPI1,      SPI2,      SPI3,      GMI,           GMI,       0x18, 11, 0x8C, 28, 0xA8, 6),
+	PINGROUP(SPIC,  AUDIO, SPI1,      SPI2,      SPI3,      GMI,           GMI,       0x18, 12, 0x8C, 26, 0xA8, 8),
+	PINGROUP(SPID,  AUDIO, SPI2,      SPI1,      SPI2_ALT,  GMI,           GMI,       0x18, 13, 0x8C, 24, 0xA8, 10),
+	PINGROUP(SPIE,  AUDIO, SPI2,      SPI1,      SPI2_ALT,  GMI,           GMI,       0x18, 14, 0x8C, 22, 0xA8, 12),
+	PINGROUP(SPIF,  AUDIO, SPI3,      SPI1,      SPI2,      RSVD,          RSVD4,     0x18, 15, 0x8C, 20, 0xA8, 14),
+	PINGROUP(SPIG,  AUDIO, SPI3,      SPI2,      SPI2_ALT,  I2C,           SPI2_ALT,  0x18, 16, 0x8C, 18, 0xA8, 16),
+	PINGROUP(SPIH,  AUDIO, SPI3,      SPI2,      SPI2_ALT,  I2C,           SPI2_ALT,  0x18, 17, 0x8C, 16, 0xA8, 18),
+	PINGROUP(UAA,   BB,    SPI3,      MIPI_HS,   UARTA,     ULPI,          MIPI_HS,   0x18, 18, 0x80, 0,  0xAC, 0),
+	PINGROUP(UAB,   BB,    SPI2,      MIPI_HS,   UARTA,     ULPI,          MIPI_HS,   0x18, 19, 0x80, 2,  0xAC, 2),
+	PINGROUP(UAC,   BB,    OWR,       RSVD,      RSVD,      RSVD,          RSVD4,     0x18, 20, 0x80, 4,  0xAC, 4),
+	PINGROUP(UAD,   UART,  IRDA,      SPDIF,     UARTA,     SPI4,          SPDIF,     0x18, 21, 0x80, 6,  0xAC, 6),
+	PINGROUP(UCA,   UART,  UARTC,     RSVD,      GMI,       RSVD,          RSVD4,     0x18, 22, 0x84, 16, 0xAC, 8),
+	PINGROUP(UCB,   UART,  UARTC,     PWM,       GMI,       RSVD,          RSVD4,     0x18, 23, 0x84, 18, 0xAC, 10),
+	PINGROUP(UDA,   BB,    SPI1,      RSVD,      UARTD,     ULPI,          RSVD2,     0x20, 13, 0x80, 8,  0xB0, 16),
+	/* these pin groups only have pullup and pull down control */
+	PINGROUP(CK32,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 14),
+	PINGROUP(DDRC,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xAC, 26),
+	PINGROUP(PMCA,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 4),
+	PINGROUP(PMCB,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 6),
+	PINGROUP(PMCC,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 8),
+	PINGROUP(PMCD,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 10),
+	PINGROUP(PMCE,  SYS,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xB0, 12),
+	PINGROUP(XM2C,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xA8, 30),
+	PINGROUP(XM2D,  DDR,   RSVD,      RSVD,      RSVD,      RSVD,          RSVD,      -1,   -1, -1,   -1, 0xA8, 28),
+};
+
+#ifdef CONFIG_PM
+#define TRISTATE_REG_A         0x14
+#define TRISTATE_REG_NUM       4
+#define PIN_MUX_CTL_REG_A      0x80
+#define PIN_MUX_CTL_REG_NUM    8
+#define PULLUPDOWN_REG_A       0xa0
+#define PULLUPDOWN_REG_NUM     5
+
+static u32 pinmux_reg[TRISTATE_REG_NUM + PIN_MUX_CTL_REG_NUM +
+		     PULLUPDOWN_REG_NUM];
+
+static inline unsigned long pg_readl(unsigned long offset)
+{
+	return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+}
+
+static inline void pg_writel(unsigned long value, unsigned long offset)
+{
+	writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+}
+
+void tegra_pinmux_suspend(void)
+{
+	unsigned int i;
+	u32 *ctx = pinmux_reg;
+
+	for (i = 0; i < TRISTATE_REG_NUM; i++)
+		*ctx++ = pg_readl(TRISTATE_REG_A + i*4);
+
+	for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++)
+		*ctx++ = pg_readl(PIN_MUX_CTL_REG_A + i*4);
+
+	for (i = 0; i < PULLUPDOWN_REG_NUM; i++)
+		*ctx++ = pg_readl(PULLUPDOWN_REG_A + i*4);
+}
+
+void tegra_pinmux_resume(void)
+{
+	unsigned int i;
+	u32 *ctx = pinmux_reg;
+
+	for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++)
+		pg_writel(*ctx++, PIN_MUX_CTL_REG_A + i*4);
+
+	for (i = 0; i < PULLUPDOWN_REG_NUM; i++)
+		pg_writel(*ctx++, PULLUPDOWN_REG_A + i*4);
+
+	for (i = 0; i < TRISTATE_REG_NUM; i++)
+		pg_writel(*ctx++, TRISTATE_REG_A + i*4);
+}
+#endif
diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
new file mode 100644
index 000000000000..f80d507671bc
--- /dev/null
+++ b/arch/arm/mach-tegra/pinmux.c
@@ -0,0 +1,825 @@
+/*
+ * linux/arch/arm/mach-tegra/pinmux.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#include <mach/iomap.h>
+#include <mach/pinmux.h>
+
+#define HSM_EN(reg)	(((reg) >> 2) & 0x1)
+#define SCHMT_EN(reg)	(((reg) >> 3) & 0x1)
+#define LPMD(reg)	(((reg) >> 4) & 0x3)
+#define DRVDN(reg)	(((reg) >> 12) & 0x1f)
+#define DRVUP(reg)	(((reg) >> 20) & 0x1f)
+#define SLWR(reg)	(((reg) >> 28) & 0x3)
+#define SLWF(reg)	(((reg) >> 30) & 0x3)
+
+static const struct tegra_pingroup_desc *const pingroups = tegra_soc_pingroups;
+static const struct tegra_drive_pingroup_desc *const drive_pingroups = tegra_soc_drive_pingroups;
+
+static char *tegra_mux_names[TEGRA_MAX_MUX] = {
+	[TEGRA_MUX_AHB_CLK] = "AHB_CLK",
+	[TEGRA_MUX_APB_CLK] = "APB_CLK",
+	[TEGRA_MUX_AUDIO_SYNC] = "AUDIO_SYNC",
+	[TEGRA_MUX_CRT] = "CRT",
+	[TEGRA_MUX_DAP1] = "DAP1",
+	[TEGRA_MUX_DAP2] = "DAP2",
+	[TEGRA_MUX_DAP3] = "DAP3",
+	[TEGRA_MUX_DAP4] = "DAP4",
+	[TEGRA_MUX_DAP5] = "DAP5",
+	[TEGRA_MUX_DISPLAYA] = "DISPLAYA",
+	[TEGRA_MUX_DISPLAYB] = "DISPLAYB",
+	[TEGRA_MUX_EMC_TEST0_DLL] = "EMC_TEST0_DLL",
+	[TEGRA_MUX_EMC_TEST1_DLL] = "EMC_TEST1_DLL",
+	[TEGRA_MUX_GMI] = "GMI",
+	[TEGRA_MUX_GMI_INT] = "GMI_INT",
+	[TEGRA_MUX_HDMI] = "HDMI",
+	[TEGRA_MUX_I2C] = "I2C",
+	[TEGRA_MUX_I2C2] = "I2C2",
+	[TEGRA_MUX_I2C3] = "I2C3",
+	[TEGRA_MUX_IDE] = "IDE",
+	[TEGRA_MUX_IRDA] = "IRDA",
+	[TEGRA_MUX_KBC] = "KBC",
+	[TEGRA_MUX_MIO] = "MIO",
+	[TEGRA_MUX_MIPI_HS] = "MIPI_HS",
+	[TEGRA_MUX_NAND] = "NAND",
+	[TEGRA_MUX_OSC] = "OSC",
+	[TEGRA_MUX_OWR] = "OWR",
+	[TEGRA_MUX_PCIE] = "PCIE",
+	[TEGRA_MUX_PLLA_OUT] = "PLLA_OUT",
+	[TEGRA_MUX_PLLC_OUT1] = "PLLC_OUT1",
+	[TEGRA_MUX_PLLM_OUT1] = "PLLM_OUT1",
+	[TEGRA_MUX_PLLP_OUT2] = "PLLP_OUT2",
+	[TEGRA_MUX_PLLP_OUT3] = "PLLP_OUT3",
+	[TEGRA_MUX_PLLP_OUT4] = "PLLP_OUT4",
+	[TEGRA_MUX_PWM] = "PWM",
+	[TEGRA_MUX_PWR_INTR] = "PWR_INTR",
+	[TEGRA_MUX_PWR_ON] = "PWR_ON",
+	[TEGRA_MUX_RTCK] = "RTCK",
+	[TEGRA_MUX_SDIO1] = "SDIO1",
+	[TEGRA_MUX_SDIO2] = "SDIO2",
+	[TEGRA_MUX_SDIO3] = "SDIO3",
+	[TEGRA_MUX_SDIO4] = "SDIO4",
+	[TEGRA_MUX_SFLASH] = "SFLASH",
+	[TEGRA_MUX_SPDIF] = "SPDIF",
+	[TEGRA_MUX_SPI1] = "SPI1",
+	[TEGRA_MUX_SPI2] = "SPI2",
+	[TEGRA_MUX_SPI2_ALT] = "SPI2_ALT",
+	[TEGRA_MUX_SPI3] = "SPI3",
+	[TEGRA_MUX_SPI4] = "SPI4",
+	[TEGRA_MUX_TRACE] = "TRACE",
+	[TEGRA_MUX_TWC] = "TWC",
+	[TEGRA_MUX_UARTA] = "UARTA",
+	[TEGRA_MUX_UARTB] = "UARTB",
+	[TEGRA_MUX_UARTC] = "UARTC",
+	[TEGRA_MUX_UARTD] = "UARTD",
+	[TEGRA_MUX_UARTE] = "UARTE",
+	[TEGRA_MUX_ULPI] = "ULPI",
+	[TEGRA_MUX_VI] = "VI",
+	[TEGRA_MUX_VI_SENSOR_CLK] = "VI_SENSOR_CLK",
+	[TEGRA_MUX_XIO] = "XIO",
+	[TEGRA_MUX_SAFE] = "<safe>",
+};
+
+static const char *tegra_drive_names[TEGRA_MAX_DRIVE] = {
+	[TEGRA_DRIVE_DIV_8] = "DIV_8",
+	[TEGRA_DRIVE_DIV_4] = "DIV_4",
+	[TEGRA_DRIVE_DIV_2] = "DIV_2",
+	[TEGRA_DRIVE_DIV_1] = "DIV_1",
+};
+
+static const char *tegra_slew_names[TEGRA_MAX_SLEW] = {
+	[TEGRA_SLEW_FASTEST] = "FASTEST",
+	[TEGRA_SLEW_FAST] = "FAST",
+	[TEGRA_SLEW_SLOW] = "SLOW",
+	[TEGRA_SLEW_SLOWEST] = "SLOWEST",
+};
+
+static DEFINE_SPINLOCK(mux_lock);
+
+static const char *pingroup_name(enum tegra_pingroup pg)
+{
+	if (pg < 0 || pg >=  TEGRA_MAX_PINGROUP)
+		return "<UNKNOWN>";
+
+	return pingroups[pg].name;
+}
+
+static const char *func_name(enum tegra_mux_func func)
+{
+	if (func == TEGRA_MUX_RSVD1)
+		return "RSVD1";
+
+	if (func == TEGRA_MUX_RSVD2)
+		return "RSVD2";
+
+	if (func == TEGRA_MUX_RSVD3)
+		return "RSVD3";
+
+	if (func == TEGRA_MUX_RSVD4)
+		return "RSVD4";
+
+	if (func == TEGRA_MUX_NONE)
+		return "NONE";
+
+	if (func < 0 || func >=  TEGRA_MAX_MUX)
+		return "<UNKNOWN>";
+
+	return tegra_mux_names[func];
+}
+
+
+static const char *tri_name(unsigned long val)
+{
+	return val ? "TRISTATE" : "NORMAL";
+}
+
+static const char *pupd_name(unsigned long val)
+{
+	switch (val) {
+	case 0:
+		return "NORMAL";
+
+	case 1:
+		return "PULL_DOWN";
+
+	case 2:
+		return "PULL_UP";
+
+	default:
+		return "RSVD";
+	}
+}
+
+
+static inline unsigned long pg_readl(unsigned long offset)
+{
+	return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+}
+
+static inline void pg_writel(unsigned long value, unsigned long offset)
+{
+	writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+}
+
+static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config)
+{
+	int mux = -1;
+	int i;
+	unsigned long reg;
+	unsigned long flags;
+	enum tegra_pingroup pg = config->pingroup;
+	enum tegra_mux_func func = config->func;
+
+	if (pg < 0 || pg >=  TEGRA_MAX_PINGROUP)
+		return -ERANGE;
+
+	if (pingroups[pg].mux_reg < 0)
+		return -EINVAL;
+
+	if (func < 0)
+		return -ERANGE;
+
+	if (func == TEGRA_MUX_SAFE)
+		func = pingroups[pg].func_safe;
+
+	if (func & TEGRA_MUX_RSVD) {
+		mux = func & 0x3;
+	} else {
+		for (i = 0; i < 4; i++) {
+			if (pingroups[pg].funcs[i] == func) {
+				mux = i;
+				break;
+			}
+		}
+	}
+
+	if (mux < 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(pingroups[pg].mux_reg);
+	reg &= ~(0x3 << pingroups[pg].mux_bit);
+	reg |= mux << pingroups[pg].mux_bit;
+	pg_writel(reg, pingroups[pg].mux_reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+int tegra_pinmux_set_tristate(enum tegra_pingroup pg,
+	enum tegra_tristate tristate)
+{
+	unsigned long reg;
+	unsigned long flags;
+
+	if (pg < 0 || pg >=  TEGRA_MAX_PINGROUP)
+		return -ERANGE;
+
+	if (pingroups[pg].tri_reg < 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(pingroups[pg].tri_reg);
+	reg &= ~(0x1 << pingroups[pg].tri_bit);
+	if (tristate)
+		reg |= 1 << pingroups[pg].tri_bit;
+	pg_writel(reg, pingroups[pg].tri_reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg,
+	enum tegra_pullupdown pupd)
+{
+	unsigned long reg;
+	unsigned long flags;
+
+	if (pg < 0 || pg >=  TEGRA_MAX_PINGROUP)
+		return -ERANGE;
+
+	if (pingroups[pg].pupd_reg < 0)
+		return -EINVAL;
+
+	if (pupd != TEGRA_PUPD_NORMAL &&
+	    pupd != TEGRA_PUPD_PULL_DOWN &&
+	    pupd != TEGRA_PUPD_PULL_UP)
+		return -EINVAL;
+
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(pingroups[pg].pupd_reg);
+	reg &= ~(0x3 << pingroups[pg].pupd_bit);
+	reg |= pupd << pingroups[pg].pupd_bit;
+	pg_writel(reg, pingroups[pg].pupd_reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static void tegra_pinmux_config_pingroup(const struct tegra_pingroup_config *config)
+{
+	enum tegra_pingroup pingroup = config->pingroup;
+	enum tegra_mux_func func     = config->func;
+	enum tegra_pullupdown pupd   = config->pupd;
+	enum tegra_tristate tristate = config->tristate;
+	int err;
+
+	if (pingroups[pingroup].mux_reg >= 0) {
+		err = tegra_pinmux_set_func(config);
+		if (err < 0)
+			pr_err("pinmux: can't set pingroup %s func to %s: %d\n",
+			       pingroup_name(pingroup), func_name(func), err);
+	}
+
+	if (pingroups[pingroup].pupd_reg >= 0) {
+		err = tegra_pinmux_set_pullupdown(pingroup, pupd);
+		if (err < 0)
+			pr_err("pinmux: can't set pingroup %s pullupdown to %s: %d\n",
+			       pingroup_name(pingroup), pupd_name(pupd), err);
+	}
+
+	if (pingroups[pingroup].tri_reg >= 0) {
+		err = tegra_pinmux_set_tristate(pingroup, tristate);
+		if (err < 0)
+			pr_err("pinmux: can't set pingroup %s tristate to %s: %d\n",
+			       pingroup_name(pingroup), tri_name(func), err);
+	}
+}
+
+void tegra_pinmux_config_table(const struct tegra_pingroup_config *config, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		tegra_pinmux_config_pingroup(&config[i]);
+}
+
+static const char *drive_pinmux_name(enum tegra_drive_pingroup pg)
+{
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return "<UNKNOWN>";
+
+	return drive_pingroups[pg].name;
+}
+
+static const char *enable_name(unsigned long val)
+{
+	return val ? "ENABLE" : "DISABLE";
+}
+
+static const char *drive_name(unsigned long val)
+{
+	if (val >= TEGRA_MAX_DRIVE)
+		return "<UNKNOWN>";
+
+	return tegra_drive_names[val];
+}
+
+static const char *slew_name(unsigned long val)
+{
+	if (val >= TEGRA_MAX_SLEW)
+		return "<UNKNOWN>";
+
+	return tegra_slew_names[val];
+}
+
+static int tegra_drive_pinmux_set_hsm(enum tegra_drive_pingroup pg,
+	enum tegra_hsm hsm)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (hsm != TEGRA_HSM_ENABLE && hsm != TEGRA_HSM_DISABLE)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	if (hsm == TEGRA_HSM_ENABLE)
+		reg |= (1 << 2);
+	else
+		reg &= ~(1 << 2);
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_schmitt(enum tegra_drive_pingroup pg,
+	enum tegra_schmitt schmitt)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (schmitt != TEGRA_SCHMITT_ENABLE && schmitt != TEGRA_SCHMITT_DISABLE)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	if (schmitt == TEGRA_SCHMITT_ENABLE)
+		reg |= (1 << 3);
+	else
+		reg &= ~(1 << 3);
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_drive(enum tegra_drive_pingroup pg,
+	enum tegra_drive drive)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (drive < 0 || drive >= TEGRA_MAX_DRIVE)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	reg &= ~(0x3 << 4);
+	reg |= drive << 4;
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_pull_down(enum tegra_drive_pingroup pg,
+	enum tegra_pull_strength pull_down)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (pull_down < 0 || pull_down >= TEGRA_MAX_PULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	reg &= ~(0x1f << 12);
+	reg |= pull_down << 12;
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_pull_up(enum tegra_drive_pingroup pg,
+	enum tegra_pull_strength pull_up)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (pull_up < 0 || pull_up >= TEGRA_MAX_PULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	reg &= ~(0x1f << 12);
+	reg |= pull_up << 12;
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_slew_rising(enum tegra_drive_pingroup pg,
+	enum tegra_slew slew_rising)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (slew_rising < 0 || slew_rising >= TEGRA_MAX_SLEW)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	reg &= ~(0x3 << 28);
+	reg |= slew_rising << 28;
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_slew_falling(enum tegra_drive_pingroup pg,
+	enum tegra_slew slew_falling)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (slew_falling < 0 || slew_falling >= TEGRA_MAX_SLEW)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	reg &= ~(0x3 << 30);
+	reg |= slew_falling << 30;
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static void tegra_drive_pinmux_config_pingroup(enum tegra_drive_pingroup pingroup,
+					  enum tegra_hsm hsm,
+					  enum tegra_schmitt schmitt,
+					  enum tegra_drive drive,
+					  enum tegra_pull_strength pull_down,
+					  enum tegra_pull_strength pull_up,
+					  enum tegra_slew slew_rising,
+					  enum tegra_slew slew_falling)
+{
+	int err;
+
+	err = tegra_drive_pinmux_set_hsm(pingroup, hsm);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s hsm to %s: %d\n",
+			drive_pinmux_name(pingroup),
+			enable_name(hsm), err);
+
+	err = tegra_drive_pinmux_set_schmitt(pingroup, schmitt);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s schmitt to %s: %d\n",
+			drive_pinmux_name(pingroup),
+			enable_name(schmitt), err);
+
+	err = tegra_drive_pinmux_set_drive(pingroup, drive);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s drive to %s: %d\n",
+			drive_pinmux_name(pingroup),
+			drive_name(drive), err);
+
+	err = tegra_drive_pinmux_set_pull_down(pingroup, pull_down);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s pull down to %d: %d\n",
+			drive_pinmux_name(pingroup),
+			pull_down, err);
+
+	err = tegra_drive_pinmux_set_pull_up(pingroup, pull_up);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s pull up to %d: %d\n",
+			drive_pinmux_name(pingroup),
+			pull_up, err);
+
+	err = tegra_drive_pinmux_set_slew_rising(pingroup, slew_rising);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s rising slew to %s: %d\n",
+			drive_pinmux_name(pingroup),
+			slew_name(slew_rising), err);
+
+	err = tegra_drive_pinmux_set_slew_falling(pingroup, slew_falling);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s falling slew to %s: %d\n",
+			drive_pinmux_name(pingroup),
+			slew_name(slew_falling), err);
+}
+
+void tegra_drive_pinmux_config_table(struct tegra_drive_pingroup_config *config,
+	int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		tegra_drive_pinmux_config_pingroup(config[i].pingroup,
+						     config[i].hsm,
+						     config[i].schmitt,
+						     config[i].drive,
+						     config[i].pull_down,
+						     config[i].pull_up,
+						     config[i].slew_rising,
+						     config[i].slew_falling);
+}
+
+void tegra_pinmux_set_safe_pinmux_table(const struct tegra_pingroup_config *config,
+	int len)
+{
+	int i;
+	struct tegra_pingroup_config c;
+
+	for (i = 0; i < len; i++) {
+		int err;
+		c = config[i];
+		if (c.pingroup < 0 || c.pingroup >= TEGRA_MAX_PINGROUP) {
+			WARN_ON(1);
+			continue;
+		}
+		c.func = pingroups[c.pingroup].func_safe;
+		err = tegra_pinmux_set_func(&c);
+		if (err < 0)
+			pr_err("%s: tegra_pinmux_set_func returned %d setting "
+			       "%s to %s\n", __func__, err,
+			       pingroup_name(c.pingroup), func_name(c.func));
+	}
+}
+
+void tegra_pinmux_config_pinmux_table(const struct tegra_pingroup_config *config,
+	int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		int err;
+		if (config[i].pingroup < 0 ||
+		    config[i].pingroup >= TEGRA_MAX_PINGROUP) {
+			WARN_ON(1);
+			continue;
+		}
+		err = tegra_pinmux_set_func(&config[i]);
+		if (err < 0)
+			pr_err("%s: tegra_pinmux_set_func returned %d setting "
+			       "%s to %s\n", __func__, err,
+			       pingroup_name(config[i].pingroup),
+			       func_name(config[i].func));
+	}
+}
+
+void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *config,
+	int len, enum tegra_tristate tristate)
+{
+	int i;
+	int err;
+	enum tegra_pingroup pingroup;
+
+	for (i = 0; i < len; i++) {
+		pingroup = config[i].pingroup;
+		if (pingroups[pingroup].tri_reg >= 0) {
+			err = tegra_pinmux_set_tristate(pingroup, tristate);
+			if (err < 0)
+				pr_err("pinmux: can't set pingroup %s tristate"
+					" to %s: %d\n",	pingroup_name(pingroup),
+					tri_name(tristate), err);
+		}
+	}
+}
+
+void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *config,
+	int len, enum tegra_pullupdown pupd)
+{
+	int i;
+	int err;
+	enum tegra_pingroup pingroup;
+
+	for (i = 0; i < len; i++) {
+		pingroup = config[i].pingroup;
+		if (pingroups[pingroup].pupd_reg >= 0) {
+			err = tegra_pinmux_set_pullupdown(pingroup, pupd);
+			if (err < 0)
+				pr_err("pinmux: can't set pingroup %s pullupdown"
+					" to %s: %d\n",	pingroup_name(pingroup),
+					pupd_name(pupd), err);
+		}
+	}
+}
+
+#ifdef	CONFIG_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static void dbg_pad_field(struct seq_file *s, int len)
+{
+	seq_putc(s, ',');
+
+	while (len-- > -1)
+		seq_putc(s, ' ');
+}
+
+static int dbg_pinmux_show(struct seq_file *s, void *unused)
+{
+	int i;
+	int len;
+
+	for (i = 0; i < TEGRA_MAX_PINGROUP; i++) {
+		unsigned long tri;
+		unsigned long mux;
+		unsigned long pupd;
+
+		seq_printf(s, "\t{TEGRA_PINGROUP_%s", pingroups[i].name);
+		len = strlen(pingroups[i].name);
+		dbg_pad_field(s, 5 - len);
+
+		if (pingroups[i].mux_reg < 0) {
+			seq_printf(s, "TEGRA_MUX_NONE");
+			len = strlen("NONE");
+		} else {
+			mux = (pg_readl(pingroups[i].mux_reg) >>
+			       pingroups[i].mux_bit) & 0x3;
+			if (pingroups[i].funcs[mux] == TEGRA_MUX_RSVD) {
+				seq_printf(s, "TEGRA_MUX_RSVD%1lu", mux+1);
+				len = 5;
+			} else {
+				seq_printf(s, "TEGRA_MUX_%s",
+					   tegra_mux_names[pingroups[i].funcs[mux]]);
+				len = strlen(tegra_mux_names[pingroups[i].funcs[mux]]);
+			}
+		}
+		dbg_pad_field(s, 13-len);
+
+		if (pingroups[i].pupd_reg < 0) {
+			seq_printf(s, "TEGRA_PUPD_NORMAL");
+			len = strlen("NORMAL");
+		} else {
+			pupd = (pg_readl(pingroups[i].pupd_reg) >>
+				pingroups[i].pupd_bit) & 0x3;
+			seq_printf(s, "TEGRA_PUPD_%s", pupd_name(pupd));
+			len = strlen(pupd_name(pupd));
+		}
+		dbg_pad_field(s, 9 - len);
+
+		if (pingroups[i].tri_reg < 0) {
+			seq_printf(s, "TEGRA_TRI_NORMAL");
+		} else {
+			tri = (pg_readl(pingroups[i].tri_reg) >>
+			       pingroups[i].tri_bit) & 0x1;
+
+			seq_printf(s, "TEGRA_TRI_%s", tri_name(tri));
+		}
+		seq_printf(s, "},\n");
+	}
+	return 0;
+}
+
+static int dbg_pinmux_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dbg_pinmux_show, &inode->i_private);
+}
+
+static const struct file_operations debug_fops = {
+	.open		= dbg_pinmux_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int dbg_drive_pinmux_show(struct seq_file *s, void *unused)
+{
+	int i;
+	int len;
+
+	for (i = 0; i < TEGRA_MAX_DRIVE_PINGROUP; i++) {
+		u32 reg;
+
+		seq_printf(s, "\t{TEGRA_DRIVE_PINGROUP_%s",
+			drive_pingroups[i].name);
+		len = strlen(drive_pingroups[i].name);
+		dbg_pad_field(s, 7 - len);
+
+
+		reg = pg_readl(drive_pingroups[i].reg);
+		if (HSM_EN(reg)) {
+			seq_printf(s, "TEGRA_HSM_ENABLE");
+			len = 16;
+		} else {
+			seq_printf(s, "TEGRA_HSM_DISABLE");
+			len = 17;
+		}
+		dbg_pad_field(s, 17 - len);
+
+		if (SCHMT_EN(reg)) {
+			seq_printf(s, "TEGRA_SCHMITT_ENABLE");
+			len = 21;
+		} else {
+			seq_printf(s, "TEGRA_SCHMITT_DISABLE");
+			len = 22;
+		}
+		dbg_pad_field(s, 22 - len);
+
+		seq_printf(s, "TEGRA_DRIVE_%s", drive_name(LPMD(reg)));
+		len = strlen(drive_name(LPMD(reg)));
+		dbg_pad_field(s, 5 - len);
+
+		seq_printf(s, "TEGRA_PULL_%d", DRVDN(reg));
+		len = DRVDN(reg) < 10 ? 1 : 2;
+		dbg_pad_field(s, 2 - len);
+
+		seq_printf(s, "TEGRA_PULL_%d", DRVUP(reg));
+		len = DRVUP(reg) < 10 ? 1 : 2;
+		dbg_pad_field(s, 2 - len);
+
+		seq_printf(s, "TEGRA_SLEW_%s", slew_name(SLWR(reg)));
+		len = strlen(slew_name(SLWR(reg)));
+		dbg_pad_field(s, 7 - len);
+
+		seq_printf(s, "TEGRA_SLEW_%s", slew_name(SLWF(reg)));
+
+		seq_printf(s, "},\n");
+	}
+	return 0;
+}
+
+static int dbg_drive_pinmux_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dbg_drive_pinmux_show, &inode->i_private);
+}
+
+static const struct file_operations debug_drive_fops = {
+	.open		= dbg_drive_pinmux_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init tegra_pinmux_debuginit(void)
+{
+	(void) debugfs_create_file("tegra_pinmux", S_IRUGO,
+					NULL, NULL, &debug_fops);
+	(void) debugfs_create_file("tegra_pinmux_drive", S_IRUGO,
+					NULL, NULL, &debug_drive_fops);
+	return 0;
+}
+late_initcall(tegra_pinmux_debuginit);
+#endif
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
new file mode 100644
index 000000000000..1c0fd92cab39
--- /dev/null
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -0,0 +1,156 @@
+/*
+ *  linux/arch/arm/mach-tegra/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ *  Copyright (C) 2009 Palm
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+
+#include <mach/iomap.h>
+
+extern void tegra_secondary_startup(void);
+
+static DEFINE_SPINLOCK(boot_lock);
+static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
+
+#define EVP_CPU_RESET_VECTOR \
+	(IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
+#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \
+	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c)
+#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \
+	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344)
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x100);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long old_boot_vector;
+	unsigned long boot_vector;
+	unsigned long timeout;
+	u32 reg;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+
+	/* set the reset vector to point to the secondary_startup routine */
+
+	boot_vector = virt_to_phys(tegra_secondary_startup);
+	old_boot_vector = readl(EVP_CPU_RESET_VECTOR);
+	writel(boot_vector, EVP_CPU_RESET_VECTOR);
+
+	/* enable cpu clock on cpu1 */
+	reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+	writel(reg & ~(1<<9), CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+
+	reg = (1<<13) | (1<<9) | (1<<5) | (1<<1);
+	writel(reg, CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
+
+	smp_wmb();
+	flush_cache_all();
+
+	/* unhalt the cpu */
+	writel(0, IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + 0x14);
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (readl(EVP_CPU_RESET_VECTOR) != boot_vector)
+			break;
+		udelay(10);
+	}
+
+	/* put the old boot vector back */
+	writel(old_boot_vector, EVP_CPU_RESET_VECTOR);
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = scu_get_core_count(scu_base);
+
+	for (i = 0; i < ncores; i++)
+		cpu_set(i, cpu_possible_map);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = scu_get_core_count(scu_base);
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	/*
+	 * Initialise the SCU if there are more than one CPU and let
+	 * them know where to start. Note that, on modern versions of
+	 * MILO, the "poke" doesn't actually do anything until each
+	 * individual core is sent a soft interrupt to get it out of
+	 * WFI
+	 */
+	if (max_cpus > 1) {
+		percpu_timer_setup();
+		scu_enable(scu_base);
+	}
+}
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
new file mode 100644
index 000000000000..ae3b308e22a4
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -0,0 +1,1843 @@
+/*
+ * arch/arm/mach-tegra/tegra2_clocks.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/hrtimer.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/iomap.h>
+
+#include "clock.h"
+#include "fuse.h"
+#include "tegra2_dvfs.h"
+
+#define RST_DEVICES			0x004
+#define RST_DEVICES_SET			0x300
+#define RST_DEVICES_CLR			0x304
+#define RST_DEVICES_NUM			3
+
+#define CLK_OUT_ENB			0x010
+#define CLK_OUT_ENB_SET			0x320
+#define CLK_OUT_ENB_CLR			0x324
+#define CLK_OUT_ENB_NUM			3
+
+#define CLK_MASK_ARM			0x44
+#define MISC_CLK_ENB			0x48
+
+#define OSC_CTRL			0x50
+#define OSC_CTRL_OSC_FREQ_MASK		(3<<30)
+#define OSC_CTRL_OSC_FREQ_13MHZ		(0<<30)
+#define OSC_CTRL_OSC_FREQ_19_2MHZ	(1<<30)
+#define OSC_CTRL_OSC_FREQ_12MHZ		(2<<30)
+#define OSC_CTRL_OSC_FREQ_26MHZ		(3<<30)
+#define OSC_CTRL_MASK			0x3f2
+
+#define OSC_FREQ_DET			0x58
+#define OSC_FREQ_DET_TRIG		(1<<31)
+
+#define OSC_FREQ_DET_STATUS		0x5C
+#define OSC_FREQ_DET_BUSY		(1<<31)
+#define OSC_FREQ_DET_CNT_MASK		0xFFFF
+
+#define PERIPH_CLK_SOURCE_I2S1		0x100
+#define PERIPH_CLK_SOURCE_EMC		0x19c
+#define PERIPH_CLK_SOURCE_OSC		0x1fc
+#define PERIPH_CLK_SOURCE_NUM \
+	((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4)
+
+#define PERIPH_CLK_SOURCE_MASK		(3<<30)
+#define PERIPH_CLK_SOURCE_SHIFT		30
+#define PERIPH_CLK_SOURCE_ENABLE	(1<<28)
+#define PERIPH_CLK_SOURCE_DIVU71_MASK	0xFF
+#define PERIPH_CLK_SOURCE_DIVU16_MASK	0xFFFF
+#define PERIPH_CLK_SOURCE_DIV_SHIFT	0
+
+#define PLL_BASE			0x0
+#define PLL_BASE_BYPASS			(1<<31)
+#define PLL_BASE_ENABLE			(1<<30)
+#define PLL_BASE_REF_ENABLE		(1<<29)
+#define PLL_BASE_OVERRIDE		(1<<28)
+#define PLL_BASE_LOCK			(1<<27)
+#define PLL_BASE_DIVP_MASK		(0x7<<20)
+#define PLL_BASE_DIVP_SHIFT		20
+#define PLL_BASE_DIVN_MASK		(0x3FF<<8)
+#define PLL_BASE_DIVN_SHIFT		8
+#define PLL_BASE_DIVM_MASK		(0x1F)
+#define PLL_BASE_DIVM_SHIFT		0
+
+#define PLL_OUT_RATIO_MASK		(0xFF<<8)
+#define PLL_OUT_RATIO_SHIFT		8
+#define PLL_OUT_OVERRIDE		(1<<2)
+#define PLL_OUT_CLKEN			(1<<1)
+#define PLL_OUT_RESET_DISABLE		(1<<0)
+
+#define PLL_MISC(c)			(((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc)
+#define PLL_MISC_LOCK_ENABLE(c)		(((c)->flags & PLLU) ? (1<<22) : (1<<18))
+
+#define PLL_MISC_DCCON_SHIFT		20
+#define PLL_MISC_CPCON_SHIFT		8
+#define PLL_MISC_CPCON_MASK		(0xF<<PLL_MISC_CPCON_SHIFT)
+#define PLL_MISC_LFCON_SHIFT		4
+#define PLL_MISC_LFCON_MASK		(0xF<<PLL_MISC_LFCON_SHIFT)
+#define PLL_MISC_VCOCON_SHIFT		0
+#define PLL_MISC_VCOCON_MASK		(0xF<<PLL_MISC_VCOCON_SHIFT)
+
+#define PLLU_BASE_POST_DIV		(1<<20)
+
+#define PLLD_MISC_CLKENABLE		(1<<30)
+#define PLLD_MISC_DIV_RST		(1<<23)
+#define PLLD_MISC_DCCON_SHIFT		12
+
+#define PLLE_MISC_READY			(1 << 15)
+
+#define PERIPH_CLK_TO_ENB_REG(c)	((c->clk_num / 32) * 4)
+#define PERIPH_CLK_TO_ENB_SET_REG(c)	((c->clk_num / 32) * 8)
+#define PERIPH_CLK_TO_ENB_BIT(c)	(1 << (c->clk_num % 32))
+
+#define SUPER_CLK_MUX			0x00
+#define SUPER_STATE_SHIFT		28
+#define SUPER_STATE_MASK		(0xF << SUPER_STATE_SHIFT)
+#define SUPER_STATE_STANDBY		(0x0 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IDLE		(0x1 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_RUN			(0x2 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IRQ			(0x3 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_FIQ			(0x4 << SUPER_STATE_SHIFT)
+#define SUPER_SOURCE_MASK		0xF
+#define	SUPER_FIQ_SOURCE_SHIFT		12
+#define	SUPER_IRQ_SOURCE_SHIFT		8
+#define	SUPER_RUN_SOURCE_SHIFT		4
+#define	SUPER_IDLE_SOURCE_SHIFT		0
+
+#define SUPER_CLK_DIVIDER		0x04
+
+#define BUS_CLK_DISABLE			(1<<3)
+#define BUS_CLK_DIV_MASK		0x3
+
+static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE);
+
+#define clk_writel(value, reg) \
+	__raw_writel(value, (u32)reg_clk_base + (reg))
+#define clk_readl(reg) \
+	__raw_readl((u32)reg_clk_base + (reg))
+
+unsigned long clk_measure_input_freq(void)
+{
+	u32 clock_autodetect;
+	clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
+	do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY);
+	clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS);
+	if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) {
+		return 12000000;
+	} else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) {
+		return 13000000;
+	} else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) {
+		return 19200000;
+	} else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) {
+		return 26000000;
+	} else {
+		pr_err("%s: Unexpected clock autodetect value %d", __func__, clock_autodetect);
+		BUG();
+		return 0;
+	}
+}
+
+static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate)
+{
+	s64 divider_u71 = parent_rate * 2;
+	divider_u71 += rate - 1;
+	do_div(divider_u71, rate);
+
+	if (divider_u71 - 2 < 0)
+		return 0;
+
+	if (divider_u71 - 2 > 255)
+		return -EINVAL;
+
+	return divider_u71 - 2;
+}
+
+static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate)
+{
+	s64 divider_u16;
+
+	divider_u16 = parent_rate;
+	divider_u16 += rate - 1;
+	do_div(divider_u16, rate);
+
+	if (divider_u16 - 1 < 0)
+		return 0;
+
+	if (divider_u16 - 1 > 255)
+		return -EINVAL;
+
+	return divider_u16 - 1;
+}
+
+/* clk_m functions */
+static unsigned long tegra2_clk_m_autodetect_rate(struct clk *c)
+{
+	u32 auto_clock_control = clk_readl(OSC_CTRL) & ~OSC_CTRL_OSC_FREQ_MASK;
+
+	c->rate = clk_measure_input_freq();
+	switch (c->rate) {
+	case 12000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
+		break;
+	case 13000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ;
+		break;
+	case 19200000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ;
+		break;
+	case 26000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ;
+		break;
+	default:
+		pr_err("%s: Unexpected clock rate %ld", __func__, c->rate);
+		BUG();
+	}
+	clk_writel(auto_clock_control, OSC_CTRL);
+	return c->rate;
+}
+
+static void tegra2_clk_m_init(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	tegra2_clk_m_autodetect_rate(c);
+}
+
+static int tegra2_clk_m_enable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	return 0;
+}
+
+static void tegra2_clk_m_disable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	BUG();
+}
+
+static struct clk_ops tegra_clk_m_ops = {
+	.init		= tegra2_clk_m_init,
+	.enable		= tegra2_clk_m_enable,
+	.disable	= tegra2_clk_m_disable,
+};
+
+/* super clock functions */
+/* "super clocks" on tegra have two-stage muxes and a clock skipping
+ * super divider.  We will ignore the clock skipping divider, since we
+ * can't lower the voltage when using the clock skip, but we can if we
+ * lower the PLL frequency.
+ */
+static void tegra2_super_clk_init(struct clk *c)
+{
+	u32 val;
+	int source;
+	int shift;
+	const struct clk_mux_sel *sel;
+	val = clk_readl(c->reg + SUPER_CLK_MUX);
+	c->state = ON;
+	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+	source = (val >> shift) & SUPER_SOURCE_MASK;
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->value == source)
+			break;
+	}
+	BUG_ON(sel->input == NULL);
+	c->parent = sel->input;
+}
+
+static int tegra2_super_clk_enable(struct clk *c)
+{
+	clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
+	return 0;
+}
+
+static void tegra2_super_clk_disable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	/* oops - don't disable the CPU clock! */
+	BUG();
+}
+
+static int tegra2_super_clk_set_parent(struct clk *c, struct clk *p)
+{
+	u32 val;
+	const struct clk_mux_sel *sel;
+	int shift;
+
+	val = clk_readl(c->reg + SUPER_CLK_MUX);;
+	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->input == p) {
+			val &= ~(SUPER_SOURCE_MASK << shift);
+			val |= sel->value << shift;
+
+			if (c->refcnt)
+				clk_enable_locked(p);
+
+			clk_writel(val, c->reg);
+
+			if (c->refcnt && c->parent)
+				clk_disable_locked(c->parent);
+
+			clk_reparent(c, p);
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_super_ops = {
+	.init			= tegra2_super_clk_init,
+	.enable			= tegra2_super_clk_enable,
+	.disable		= tegra2_super_clk_disable,
+	.set_parent		= tegra2_super_clk_set_parent,
+};
+
+/* virtual cpu clock functions */
+/* some clocks can not be stopped (cpu, memory bus) while the SoC is running.
+   To change the frequency of these clocks, the parent pll may need to be
+   reprogrammed, so the clock must be moved off the pll, the pll reprogrammed,
+   and then the clock moved back to the pll.  To hide this sequence, a virtual
+   clock handles it.
+ */
+static void tegra2_cpu_clk_init(struct clk *c)
+{
+}
+
+static int tegra2_cpu_clk_enable(struct clk *c)
+{
+	return 0;
+}
+
+static void tegra2_cpu_clk_disable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	/* oops - don't disable the CPU clock! */
+	BUG();
+}
+
+static int tegra2_cpu_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	int ret;
+	ret = clk_set_parent_locked(c->parent, c->backup);
+	if (ret) {
+		pr_err("Failed to switch cpu to clock %s\n", c->backup->name);
+		return ret;
+	}
+
+	ret = clk_set_rate_locked(c->main, rate);
+	if (ret) {
+		pr_err("Failed to change cpu pll to %lu\n", rate);
+		return ret;
+	}
+
+	ret = clk_set_parent_locked(c->parent, c->main);
+	if (ret) {
+		pr_err("Failed to switch cpu to clock %s\n", c->main->name);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct clk_ops tegra_cpu_ops = {
+	.init     = tegra2_cpu_clk_init,
+	.enable   = tegra2_cpu_clk_enable,
+	.disable  = tegra2_cpu_clk_disable,
+	.set_rate = tegra2_cpu_clk_set_rate,
+};
+
+/* bus clock functions */
+static void tegra2_bus_clk_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON;
+	c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1;
+	c->mul = 1;
+}
+
+static int tegra2_bus_clk_enable(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	val &= ~(BUS_CLK_DISABLE << c->reg_shift);
+	clk_writel(val, c->reg);
+	return 0;
+}
+
+static void tegra2_bus_clk_disable(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	val |= BUS_CLK_DISABLE << c->reg_shift;
+	clk_writel(val, c->reg);
+}
+
+static int tegra2_bus_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val = clk_readl(c->reg);
+	unsigned long parent_rate = c->parent->rate;
+	int i;
+	for (i = 1; i <= 4; i++) {
+		if (rate == parent_rate / i) {
+			val &= ~(BUS_CLK_DIV_MASK << c->reg_shift);
+			val |= (i - 1) << c->reg_shift;
+			clk_writel(val, c->reg);
+			c->div = i;
+			c->mul = 1;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_bus_ops = {
+	.init			= tegra2_bus_clk_init,
+	.enable			= tegra2_bus_clk_enable,
+	.disable		= tegra2_bus_clk_disable,
+	.set_rate		= tegra2_bus_clk_set_rate,
+};
+
+/* PLL Functions */
+static int tegra2_pll_clk_wait_for_lock(struct clk *c)
+{
+	ktime_t before;
+
+	before = ktime_get();
+
+	while (!(clk_readl(c->reg + PLL_BASE) & PLL_BASE_LOCK)) {
+		if (ktime_us_delta(ktime_get(), before) > 5000) {
+			pr_err("Timed out waiting for lock bit on pll %s",
+				c->name);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static void tegra2_pll_clk_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg + PLL_BASE);
+
+	c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
+
+	if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
+		pr_warning("Clock %s has unknown fixed frequency\n", c->name);
+		c->mul = 1;
+		c->div = 1;
+	} else if (val & PLL_BASE_BYPASS) {
+		c->mul = 1;
+		c->div = 1;
+	} else {
+		c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
+		c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
+		if (c->flags & PLLU)
+			c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
+		else
+			c->div *= (val & PLL_BASE_DIVP_MASK) ? 2 : 1;
+	}
+}
+
+static int tegra2_pll_clk_enable(struct clk *c)
+{
+	u32 val;
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	val = clk_readl(c->reg + PLL_BASE);
+	val &= ~PLL_BASE_BYPASS;
+	val |= PLL_BASE_ENABLE;
+	clk_writel(val, c->reg + PLL_BASE);
+
+	val = clk_readl(c->reg + PLL_MISC(c));
+	val |= PLL_MISC_LOCK_ENABLE(c);
+	clk_writel(val, c->reg + PLL_MISC(c));
+
+	tegra2_pll_clk_wait_for_lock(c);
+
+	return 0;
+}
+
+static void tegra2_pll_clk_disable(struct clk *c)
+{
+	u32 val;
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	val = clk_readl(c->reg);
+	val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+	clk_writel(val, c->reg);
+}
+
+static int tegra2_pll_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val;
+	unsigned long input_rate;
+	const struct clk_pll_table *sel;
+
+	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+	BUG_ON(c->refcnt != 0);
+
+	input_rate = c->parent->rate;
+	for (sel = c->pll_table; sel->input_rate != 0; sel++) {
+		if (sel->input_rate == input_rate && sel->output_rate == rate) {
+			c->mul = sel->n;
+			c->div = sel->m * sel->p;
+
+			val = clk_readl(c->reg + PLL_BASE);
+			if (c->flags & PLL_FIXED)
+				val |= PLL_BASE_OVERRIDE;
+			val &= ~(PLL_BASE_DIVP_MASK | PLL_BASE_DIVN_MASK |
+				 PLL_BASE_DIVM_MASK);
+			val |= (sel->m << PLL_BASE_DIVM_SHIFT) |
+				(sel->n << PLL_BASE_DIVN_SHIFT);
+			BUG_ON(sel->p < 1 || sel->p > 2);
+			if (c->flags & PLLU) {
+				if (sel->p == 1)
+					val |= PLLU_BASE_POST_DIV;
+			} else {
+				if (sel->p == 2)
+					val |= 1 << PLL_BASE_DIVP_SHIFT;
+			}
+			clk_writel(val, c->reg + PLL_BASE);
+
+			if (c->flags & PLL_HAS_CPCON) {
+				val = clk_readl(c->reg + PLL_MISC(c));
+				val &= ~PLL_MISC_CPCON_MASK;
+				val |= sel->cpcon << PLL_MISC_CPCON_SHIFT;
+				clk_writel(val, c->reg + PLL_MISC(c));
+			}
+
+			if (c->state == ON)
+				tegra2_pll_clk_enable(c);
+
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_pll_ops = {
+	.init			= tegra2_pll_clk_init,
+	.enable			= tegra2_pll_clk_enable,
+	.disable		= tegra2_pll_clk_disable,
+	.set_rate		= tegra2_pll_clk_set_rate,
+};
+
+static void tegra2_pllx_clk_init(struct clk *c)
+{
+	tegra2_pll_clk_init(c);
+
+	if (tegra_sku_id() == 7)
+		c->max_rate = 750000000;
+}
+
+static struct clk_ops tegra_pllx_ops = {
+	.init     = tegra2_pllx_clk_init,
+	.enable   = tegra2_pll_clk_enable,
+	.disable  = tegra2_pll_clk_disable,
+	.set_rate = tegra2_pll_clk_set_rate,
+};
+
+static int tegra2_plle_clk_enable(struct clk *c)
+{
+	u32 val;
+
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	mdelay(1);
+
+	val = clk_readl(c->reg + PLL_BASE);
+	if (!(val & PLLE_MISC_READY))
+		return -EBUSY;
+
+	val = clk_readl(c->reg + PLL_BASE);
+	val |= PLL_BASE_ENABLE | PLL_BASE_BYPASS;
+	clk_writel(val, c->reg + PLL_BASE);
+
+	return 0;
+}
+
+static struct clk_ops tegra_plle_ops = {
+	.init       = tegra2_pll_clk_init,
+	.enable     = tegra2_plle_clk_enable,
+	.set_rate   = tegra2_pll_clk_set_rate,
+};
+
+/* Clock divider ops */
+static void tegra2_pll_div_clk_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	u32 divu71;
+	val >>= c->reg_shift;
+	c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
+	if (!(val & PLL_OUT_RESET_DISABLE))
+		c->state = OFF;
+
+	if (c->flags & DIV_U71) {
+		divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
+		c->div = (divu71 + 2);
+		c->mul = 2;
+	} else if (c->flags & DIV_2) {
+		c->div = 2;
+		c->mul = 1;
+	} else {
+		c->div = 1;
+		c->mul = 1;
+	}
+}
+
+static int tegra2_pll_div_clk_enable(struct clk *c)
+{
+	u32 val;
+	u32 new_val;
+
+	pr_debug("%s: %s\n", __func__, c->name);
+	if (c->flags & DIV_U71) {
+		val = clk_readl(c->reg);
+		new_val = val >> c->reg_shift;
+		new_val &= 0xFFFF;
+
+		new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE;
+
+		val &= ~(0xFFFF << c->reg_shift);
+		val |= new_val << c->reg_shift;
+		clk_writel(val, c->reg);
+		return 0;
+	} else if (c->flags & DIV_2) {
+		BUG_ON(!(c->flags & PLLD));
+		val = clk_readl(c->reg);
+		val &= ~PLLD_MISC_DIV_RST;
+		clk_writel(val, c->reg);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static void tegra2_pll_div_clk_disable(struct clk *c)
+{
+	u32 val;
+	u32 new_val;
+
+	pr_debug("%s: %s\n", __func__, c->name);
+	if (c->flags & DIV_U71) {
+		val = clk_readl(c->reg);
+		new_val = val >> c->reg_shift;
+		new_val &= 0xFFFF;
+
+		new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE);
+
+		val &= ~(0xFFFF << c->reg_shift);
+		val |= new_val << c->reg_shift;
+		clk_writel(val, c->reg);
+	} else if (c->flags & DIV_2) {
+		BUG_ON(!(c->flags & PLLD));
+		val = clk_readl(c->reg);
+		val |= PLLD_MISC_DIV_RST;
+		clk_writel(val, c->reg);
+	}
+}
+
+static int tegra2_pll_div_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val;
+	u32 new_val;
+	int divider_u71;
+	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+	if (c->flags & DIV_U71) {
+		divider_u71 = clk_div71_get_divider(c->parent->rate, rate);
+		if (divider_u71 >= 0) {
+			val = clk_readl(c->reg);
+			new_val = val >> c->reg_shift;
+			new_val &= 0xFFFF;
+			if (c->flags & DIV_U71_FIXED)
+				new_val |= PLL_OUT_OVERRIDE;
+			new_val &= ~PLL_OUT_RATIO_MASK;
+			new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT;
+
+			val &= ~(0xFFFF << c->reg_shift);
+			val |= new_val << c->reg_shift;
+			clk_writel(val, c->reg);
+			c->div = divider_u71 + 2;
+			c->mul = 2;
+			return 0;
+		}
+	} else if (c->flags & DIV_2) {
+		if (c->parent->rate == rate * 2)
+			return 0;
+	}
+	return -EINVAL;
+}
+
+static long tegra2_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
+{
+	int divider;
+	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+	if (c->flags & DIV_U71) {
+		divider = clk_div71_get_divider(c->parent->rate, rate);
+		if (divider < 0)
+			return divider;
+		return c->parent->rate * 2 / (divider + 2);
+	} else if (c->flags & DIV_2) {
+		return c->parent->rate / 2;
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_pll_div_ops = {
+	.init			= tegra2_pll_div_clk_init,
+	.enable			= tegra2_pll_div_clk_enable,
+	.disable		= tegra2_pll_div_clk_disable,
+	.set_rate		= tegra2_pll_div_clk_set_rate,
+	.round_rate		= tegra2_pll_div_clk_round_rate,
+};
+
+/* Periph clk ops */
+
+static void tegra2_periph_clk_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	const struct clk_mux_sel *mux = 0;
+	const struct clk_mux_sel *sel;
+	if (c->flags & MUX) {
+		for (sel = c->inputs; sel->input != NULL; sel++) {
+			if (val >> PERIPH_CLK_SOURCE_SHIFT == sel->value)
+				mux = sel;
+		}
+		BUG_ON(!mux);
+
+		c->parent = mux->input;
+	} else {
+		c->parent = c->inputs[0].input;
+	}
+
+	if (c->flags & DIV_U71) {
+		u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
+		c->div = divu71 + 2;
+		c->mul = 2;
+	} else if (c->flags & DIV_U16) {
+		u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
+		c->div = divu16 + 1;
+		c->mul = 1;
+	} else {
+		c->div = 1;
+		c->mul = 1;
+	}
+
+	c->state = ON;
+	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
+			PERIPH_CLK_TO_ENB_BIT(c)))
+		c->state = OFF;
+	if (!(c->flags & PERIPH_NO_RESET))
+		if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) &
+				PERIPH_CLK_TO_ENB_BIT(c))
+			c->state = OFF;
+}
+
+static int tegra2_periph_clk_enable(struct clk *c)
+{
+	u32 val;
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
+	if (!(c->flags & PERIPH_NO_RESET) && !(c->flags & PERIPH_MANUAL_RESET))
+		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+			RST_DEVICES_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+	if (c->flags & PERIPH_EMC_ENB) {
+		/* The EMC peripheral clock has 2 extra enable bits */
+		/* FIXME: Do they need to be disabled? */
+		val = clk_readl(c->reg);
+		val |= 0x3 << 24;
+		clk_writel(val, c->reg);
+	}
+	return 0;
+}
+
+static void tegra2_periph_clk_disable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+		CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+}
+
+void tegra2_periph_reset_deassert(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	if (!(c->flags & PERIPH_NO_RESET))
+		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+			RST_DEVICES_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+}
+
+void tegra2_periph_reset_assert(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	if (!(c->flags & PERIPH_NO_RESET))
+		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+			RST_DEVICES_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
+}
+
+
+static int tegra2_periph_clk_set_parent(struct clk *c, struct clk *p)
+{
+	u32 val;
+	const struct clk_mux_sel *sel;
+	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->input == p) {
+			val = clk_readl(c->reg);
+			val &= ~PERIPH_CLK_SOURCE_MASK;
+			val |= (sel->value) << PERIPH_CLK_SOURCE_SHIFT;
+
+			if (c->refcnt)
+				clk_enable_locked(p);
+
+			clk_writel(val, c->reg);
+
+			if (c->refcnt && c->parent)
+				clk_disable_locked(c->parent);
+
+			clk_reparent(c, p);
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int tegra2_periph_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val;
+	int divider;
+	pr_debug("%s: %lu\n", __func__, rate);
+	if (c->flags & DIV_U71) {
+		divider = clk_div71_get_divider(c->parent->rate, rate);
+		if (divider >= 0) {
+			val = clk_readl(c->reg);
+			val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK;
+			val |= divider;
+			clk_writel(val, c->reg);
+			c->div = divider + 2;
+			c->mul = 2;
+			return 0;
+		}
+	} else if (c->flags & DIV_U16) {
+		divider = clk_div16_get_divider(c->parent->rate, rate);
+		if (divider >= 0) {
+			val = clk_readl(c->reg);
+			val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK;
+			val |= divider;
+			clk_writel(val, c->reg);
+			c->div = divider + 1;
+			c->mul = 1;
+			return 0;
+		}
+	} else if (c->parent->rate <= rate) {
+		c->div = 1;
+		c->mul = 1;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static long tegra2_periph_clk_round_rate(struct clk *c,
+	unsigned long rate)
+{
+	int divider;
+	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+	if (c->flags & DIV_U71) {
+		divider = clk_div71_get_divider(c->parent->rate, rate);
+		if (divider < 0)
+			return divider;
+
+		return c->parent->rate * 2 / (divider + 2);
+	} else if (c->flags & DIV_U16) {
+		divider = clk_div16_get_divider(c->parent->rate, rate);
+		if (divider < 0)
+			return divider;
+		return c->parent->rate / (divider + 1);
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_periph_clk_ops = {
+	.init			= &tegra2_periph_clk_init,
+	.enable			= &tegra2_periph_clk_enable,
+	.disable		= &tegra2_periph_clk_disable,
+	.set_parent		= &tegra2_periph_clk_set_parent,
+	.set_rate		= &tegra2_periph_clk_set_rate,
+	.round_rate		= &tegra2_periph_clk_round_rate,
+};
+
+/* Clock doubler ops */
+static void tegra2_clk_double_init(struct clk *c)
+{
+	c->mul = 2;
+	c->div = 1;
+	c->state = ON;
+	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
+			PERIPH_CLK_TO_ENB_BIT(c)))
+		c->state = OFF;
+};
+
+static int tegra2_clk_double_set_rate(struct clk *c, unsigned long rate)
+{
+	if (rate != 2 * c->parent->rate)
+		return -EINVAL;
+	c->mul = 2;
+	c->div = 1;
+	return 0;
+}
+
+static struct clk_ops tegra_clk_double_ops = {
+	.init			= &tegra2_clk_double_init,
+	.enable			= &tegra2_periph_clk_enable,
+	.disable		= &tegra2_periph_clk_disable,
+	.set_rate		= &tegra2_clk_double_set_rate,
+};
+
+static void tegra2_audio_sync_clk_init(struct clk *c)
+{
+	int source;
+	const struct clk_mux_sel *sel;
+	u32 val = clk_readl(c->reg);
+	c->state = (val & (1<<4)) ? OFF : ON;
+	source = val & 0xf;
+	for (sel = c->inputs; sel->input != NULL; sel++)
+		if (sel->value == source)
+			break;
+	BUG_ON(sel->input == NULL);
+	c->parent = sel->input;
+}
+
+static int tegra2_audio_sync_clk_enable(struct clk *c)
+{
+	clk_writel(0, c->reg);
+	return 0;
+}
+
+static void tegra2_audio_sync_clk_disable(struct clk *c)
+{
+	clk_writel(1, c->reg);
+}
+
+static int tegra2_audio_sync_clk_set_parent(struct clk *c, struct clk *p)
+{
+	u32 val;
+	const struct clk_mux_sel *sel;
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->input == p) {
+			val = clk_readl(c->reg);
+			val &= ~0xf;
+			val |= sel->value;
+
+			if (c->refcnt)
+				clk_enable_locked(p);
+
+			clk_writel(val, c->reg);
+
+			if (c->refcnt && c->parent)
+				clk_disable_locked(c->parent);
+
+			clk_reparent(c, p);
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int tegra2_audio_sync_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	unsigned long parent_rate;
+	if (!c->parent) {
+		pr_err("%s: clock has no parent\n", __func__);
+		return -EINVAL;
+	}
+	parent_rate = c->parent->rate;
+	if (rate != parent_rate) {
+		pr_err("%s: %s/%ld differs from parent %s/%ld\n",
+			__func__,
+			c->name, rate,
+			c->parent->name, parent_rate);
+		return -EINVAL;
+	}
+	c->rate = parent_rate;
+	return 0;
+}
+
+static struct clk_ops tegra_audio_sync_clk_ops = {
+	.init       = tegra2_audio_sync_clk_init,
+	.enable     = tegra2_audio_sync_clk_enable,
+	.disable    = tegra2_audio_sync_clk_disable,
+	.set_rate   = tegra2_audio_sync_clk_set_rate,
+	.set_parent = tegra2_audio_sync_clk_set_parent,
+};
+
+/* Clock definitions */
+static struct clk tegra_clk_32k = {
+	.name = "clk_32k",
+	.rate = 32768,
+	.ops  = NULL,
+	.max_rate = 32768,
+};
+
+static struct clk_pll_table tegra_pll_s_table[] = {
+	{32768, 12000000, 366, 1, 1, 0},
+	{32768, 13000000, 397, 1, 1, 0},
+	{32768, 19200000, 586, 1, 1, 0},
+	{32768, 26000000, 793, 1, 1, 0},
+	{0, 0, 0, 0, 0, 0},
+};
+
+static struct clk tegra_pll_s = {
+	.name      = "pll_s",
+	.flags     = PLL_ALT_MISC_REG,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xf0,
+	.input_min = 32768,
+	.input_max = 32768,
+	.parent    = &tegra_clk_32k,
+	.cf_min    = 0, /* FIXME */
+	.cf_max    = 0, /* FIXME */
+	.vco_min   = 12000000,
+	.vco_max   = 26000000,
+	.pll_table = tegra_pll_s_table,
+	.max_rate  = 26000000,
+};
+
+static struct clk_mux_sel tegra_clk_m_sel[] = {
+	{ .input = &tegra_clk_32k, .value = 0},
+	{ .input = &tegra_pll_s,  .value = 1},
+	{ 0, 0},
+};
+static struct clk tegra_clk_m = {
+	.name      = "clk_m",
+	.flags     = ENABLE_ON_INIT,
+	.ops       = &tegra_clk_m_ops,
+	.inputs    = tegra_clk_m_sel,
+	.reg       = 0x1fc,
+	.reg_mask  = (1<<28),
+	.reg_shift = 28,
+	.max_rate  = 26000000,
+};
+
+static struct clk_pll_table tegra_pll_c_table[] = {
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_c = {
+	.name      = "pll_c",
+	.flags	   = PLL_HAS_CPCON,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0x80,
+	.input_min = 2000000,
+	.input_max = 31000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 20000000,
+	.vco_max   = 1400000000,
+	.pll_table = tegra_pll_c_table,
+	.max_rate  = 600000000,
+};
+
+static struct clk tegra_pll_c_out1 = {
+	.name      = "pll_c_out1",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_U71,
+	.parent    = &tegra_pll_c,
+	.reg       = 0x84,
+	.reg_shift = 0,
+	.max_rate  = 600000000,
+};
+
+static struct clk_pll_table tegra_pll_m_table[] = {
+	{ 12000000, 666000000, 666, 12, 1, 8},
+	{ 13000000, 666000000, 666, 13, 1, 8},
+	{ 19200000, 666000000, 555, 16, 1, 8},
+	{ 26000000, 666000000, 666, 26, 1, 8},
+	{ 12000000, 600000000, 600, 12, 1, 8},
+	{ 13000000, 600000000, 600, 13, 1, 8},
+	{ 19200000, 600000000, 375, 12, 1, 6},
+	{ 26000000, 600000000, 600, 26, 1, 8},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_m = {
+	.name      = "pll_m",
+	.flags     = PLL_HAS_CPCON,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0x90,
+	.input_min = 2000000,
+	.input_max = 31000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 20000000,
+	.vco_max   = 1200000000,
+	.pll_table = tegra_pll_m_table,
+	.max_rate  = 800000000,
+};
+
+static struct clk tegra_pll_m_out1 = {
+	.name      = "pll_m_out1",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_U71,
+	.parent    = &tegra_pll_m,
+	.reg       = 0x94,
+	.reg_shift = 0,
+	.max_rate  = 600000000,
+};
+
+static struct clk_pll_table tegra_pll_p_table[] = {
+	{ 12000000, 216000000, 432, 12, 2, 8},
+	{ 13000000, 216000000, 432, 13, 2, 8},
+	{ 19200000, 216000000, 90,   4, 2, 1},
+	{ 26000000, 216000000, 432, 26, 2, 8},
+	{ 12000000, 432000000, 432, 12, 1, 8},
+	{ 13000000, 432000000, 432, 13, 1, 8},
+	{ 19200000, 432000000, 90,   4, 1, 1},
+	{ 26000000, 432000000, 432, 26, 1, 8},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_p = {
+	.name      = "pll_p",
+	.flags     = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xa0,
+	.input_min = 2000000,
+	.input_max = 31000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 20000000,
+	.vco_max   = 1400000000,
+	.pll_table = tegra_pll_p_table,
+	.max_rate  = 432000000,
+};
+
+static struct clk tegra_pll_p_out1 = {
+	.name      = "pll_p_out1",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa4,
+	.reg_shift = 0,
+	.max_rate  = 432000000,
+};
+
+static struct clk tegra_pll_p_out2 = {
+	.name      = "pll_p_out2",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa4,
+	.reg_shift = 16,
+	.max_rate  = 432000000,
+};
+
+static struct clk tegra_pll_p_out3 = {
+	.name      = "pll_p_out3",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa8,
+	.reg_shift = 0,
+	.max_rate  = 432000000,
+};
+
+static struct clk tegra_pll_p_out4 = {
+	.name      = "pll_p_out4",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa8,
+	.reg_shift = 16,
+	.max_rate  = 432000000,
+};
+
+static struct clk_pll_table tegra_pll_a_table[] = {
+	{ 28800000, 56448000, 49, 25, 1, 1},
+	{ 28800000, 73728000, 64, 25, 1, 1},
+	{ 28800000, 11289600, 49, 25, 1, 1},
+	{ 28800000, 12288000, 64, 25, 1, 1},
+	{ 28800000, 24000000,  5,  6, 1, 1},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_a = {
+	.name      = "pll_a",
+	.flags     = PLL_HAS_CPCON,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xb0,
+	.input_min = 2000000,
+	.input_max = 31000000,
+	.parent    = &tegra_pll_p_out1,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 20000000,
+	.vco_max   = 1400000000,
+	.pll_table = tegra_pll_a_table,
+	.max_rate  = 56448000,
+};
+
+static struct clk tegra_pll_a_out0 = {
+	.name      = "pll_a_out0",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_U71,
+	.parent    = &tegra_pll_a,
+	.reg       = 0xb4,
+	.reg_shift = 0,
+	.max_rate  = 56448000,
+};
+
+static struct clk_pll_table tegra_pll_d_table[] = {
+	{ 12000000, 1000000000, 1000, 12, 1, 12},
+	{ 13000000, 1000000000, 1000, 13, 1, 12},
+	{ 19200000, 1000000000, 625,  12, 1, 8},
+	{ 26000000, 1000000000, 1000, 26, 1, 12},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_d = {
+	.name      = "pll_d",
+	.flags     = PLL_HAS_CPCON | PLLD,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xd0,
+	.input_min = 2000000,
+	.input_max = 40000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 40000000,
+	.vco_max   = 1000000000,
+	.pll_table = tegra_pll_d_table,
+	.max_rate  = 1000000000,
+};
+
+static struct clk tegra_pll_d_out0 = {
+	.name      = "pll_d_out0",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_2 | PLLD,
+	.parent    = &tegra_pll_d,
+	.max_rate  = 500000000,
+};
+
+static struct clk_pll_table tegra_pll_u_table[] = {
+	{ 12000000, 480000000, 960, 12, 2, 0},
+	{ 13000000, 480000000, 960, 13, 2, 0},
+	{ 19200000, 480000000, 200, 4,  2, 0},
+	{ 26000000, 480000000, 960, 26, 2, 0},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_u = {
+	.name      = "pll_u",
+	.flags     = PLLU,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xc0,
+	.input_min = 2000000,
+	.input_max = 40000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 480000000,
+	.vco_max   = 960000000,
+	.pll_table = tegra_pll_u_table,
+	.max_rate  = 480000000,
+};
+
+static struct clk_pll_table tegra_pll_x_table[] = {
+	/* 1 GHz */
+	{ 12000000, 1000000000, 1000, 12, 1, 12},
+	{ 13000000, 1000000000, 1000, 13, 1, 12},
+	{ 19200000, 1000000000, 625,  12, 1, 8},
+	{ 26000000, 1000000000, 1000, 26, 1, 12},
+
+	/* 912 MHz */
+	{ 12000000, 912000000,  912,  12, 1, 12},
+	{ 13000000, 912000000,  912,  13, 1, 12},
+	{ 19200000, 912000000,  760,  16, 1, 8},
+	{ 26000000, 912000000,  912,  26, 1, 12},
+
+	/* 816 MHz */
+	{ 12000000, 816000000,  816,  12, 1, 12},
+	{ 13000000, 816000000,  816,  13, 1, 12},
+	{ 19200000, 816000000,  680,  16, 1, 8},
+	{ 26000000, 816000000,  816,  26, 1, 12},
+
+	/* 760 MHz */
+	{ 12000000, 760000000,  760,  12, 1, 12},
+	{ 13000000, 760000000,  760,  13, 1, 12},
+	{ 19200000, 760000000,  950,  24, 1, 8},
+	{ 26000000, 760000000,  760,  26, 1, 12},
+
+	/* 608 MHz */
+	{ 12000000, 608000000,  760,  12, 1, 12},
+	{ 13000000, 608000000,  760,  13, 1, 12},
+	{ 19200000, 608000000,  380,  12, 1, 8},
+	{ 26000000, 608000000,  760,  26, 1, 12},
+
+	/* 456 MHz */
+	{ 12000000, 456000000,  456,  12, 1, 12},
+	{ 13000000, 456000000,  456,  13, 1, 12},
+	{ 19200000, 456000000,  380,  16, 1, 8},
+	{ 26000000, 456000000,  456,  26, 1, 12},
+
+	/* 312 MHz */
+	{ 12000000, 312000000,  312,  12, 1, 12},
+	{ 13000000, 312000000,  312,  13, 1, 12},
+	{ 19200000, 312000000,  260,  16, 1, 8},
+	{ 26000000, 312000000,  312,  26, 1, 12},
+
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_x = {
+	.name      = "pll_x",
+	.flags     = PLL_HAS_CPCON | PLL_ALT_MISC_REG,
+	.ops       = &tegra_pllx_ops,
+	.reg       = 0xe0,
+	.input_min = 2000000,
+	.input_max = 31000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 20000000,
+	.vco_max   = 1200000000,
+	.pll_table = tegra_pll_x_table,
+	.max_rate  = 1000000000,
+};
+
+static struct clk_pll_table tegra_pll_e_table[] = {
+	{ 12000000, 100000000,  200,  24, 1, 0 },
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_e = {
+	.name      = "pll_e",
+	.flags	   = PLL_ALT_MISC_REG,
+	.ops       = &tegra_plle_ops,
+	.input_min = 12000000,
+	.input_max = 12000000,
+	.max_rate  = 100000000,
+	.parent    = &tegra_clk_m,
+	.reg       = 0xe8,
+	.pll_table = tegra_pll_e_table,
+};
+
+static struct clk tegra_clk_d = {
+	.name      = "clk_d",
+	.flags     = PERIPH_NO_RESET,
+	.ops       = &tegra_clk_double_ops,
+	.clk_num   = 90,
+	.reg       = 0x34,
+	.reg_shift = 12,
+	.parent    = &tegra_clk_m,
+	.max_rate  = 52000000,
+};
+
+/* initialized before peripheral clocks */
+static struct clk_mux_sel mux_audio_sync_clk[8+1];
+static const struct audio_sources {
+	const char *name;
+	int value;
+} mux_audio_sync_clk_sources[] = {
+	{ .name = "spdif_in", .value = 0 },
+	{ .name = "i2s1", .value = 1 },
+	{ .name = "i2s2", .value = 2 },
+	{ .name = "pll_a_out0", .value = 4 },
+#if 0 /* FIXME: not implemented */
+	{ .name = "ac97", .value = 3 },
+	{ .name = "ext_audio_clk2", .value = 5 },
+	{ .name = "ext_audio_clk1", .value = 6 },
+	{ .name = "ext_vimclk", .value = 7 },
+#endif
+	{ 0, 0 }
+};
+
+static struct clk tegra_clk_audio = {
+	.name      = "audio",
+	.inputs    = mux_audio_sync_clk,
+	.reg       = 0x38,
+	.max_rate  = 24000000,
+	.ops       = &tegra_audio_sync_clk_ops
+};
+
+static struct clk tegra_clk_audio_2x = {
+	.name      = "audio_2x",
+	.flags     = PERIPH_NO_RESET,
+	.max_rate  = 48000000,
+	.ops       = &tegra_clk_double_ops,
+	.clk_num   = 89,
+	.reg       = 0x34,
+	.reg_shift = 8,
+	.parent    = &tegra_clk_audio,
+};
+
+struct clk_lookup tegra_audio_clk_lookups[] = {
+	{ .con_id = "audio", .clk = &tegra_clk_audio },
+	{ .con_id = "audio_2x", .clk = &tegra_clk_audio_2x }
+};
+
+/* This is called after peripheral clocks are initialized, as the
+ * audio_sync clock depends on some of the peripheral clocks.
+ */
+
+static void init_audio_sync_clock_mux(void)
+{
+	int i;
+	struct clk_mux_sel *sel = mux_audio_sync_clk;
+	const struct audio_sources *src = mux_audio_sync_clk_sources;
+	struct clk_lookup *lookup;
+
+	for (i = 0; src->name; i++, sel++, src++) {
+		sel->input = tegra_get_clock_by_name(src->name);
+		if (!sel->input)
+			pr_err("%s: could not find clk %s\n", __func__,
+				src->name);
+		sel->value = src->value;
+	}
+
+	lookup = tegra_audio_clk_lookups;
+	for (i = 0; i < ARRAY_SIZE(tegra_audio_clk_lookups); i++, lookup++) {
+		clk_init(lookup->clk);
+		clkdev_add(lookup);
+	}
+}
+
+static struct clk_mux_sel mux_cclk[] = {
+	{ .input = &tegra_clk_m,	.value = 0},
+	{ .input = &tegra_pll_c,	.value = 1},
+	{ .input = &tegra_clk_32k,	.value = 2},
+	{ .input = &tegra_pll_m,	.value = 3},
+	{ .input = &tegra_pll_p,	.value = 4},
+	{ .input = &tegra_pll_p_out4,	.value = 5},
+	{ .input = &tegra_pll_p_out3,	.value = 6},
+	{ .input = &tegra_clk_d,	.value = 7},
+	{ .input = &tegra_pll_x,	.value = 8},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_sclk[] = {
+	{ .input = &tegra_clk_m,	.value = 0},
+	{ .input = &tegra_pll_c_out1,	.value = 1},
+	{ .input = &tegra_pll_p_out4,	.value = 2},
+	{ .input = &tegra_pll_p_out3,	.value = 3},
+	{ .input = &tegra_pll_p_out2,	.value = 4},
+	{ .input = &tegra_clk_d,	.value = 5},
+	{ .input = &tegra_clk_32k,	.value = 6},
+	{ .input = &tegra_pll_m_out1,	.value = 7},
+	{ 0, 0},
+};
+
+static struct clk tegra_clk_cclk = {
+	.name	= "cclk",
+	.inputs	= mux_cclk,
+	.reg	= 0x20,
+	.ops	= &tegra_super_ops,
+	.max_rate = 1000000000,
+};
+
+static struct clk tegra_clk_sclk = {
+	.name	= "sclk",
+	.inputs	= mux_sclk,
+	.reg	= 0x28,
+	.ops	= &tegra_super_ops,
+	.max_rate = 600000000,
+};
+
+static struct clk tegra_clk_virtual_cpu = {
+	.name      = "cpu",
+	.parent    = &tegra_clk_cclk,
+	.main      = &tegra_pll_x,
+	.backup    = &tegra_clk_m,
+	.ops       = &tegra_cpu_ops,
+	.max_rate  = 1000000000,
+	.dvfs      = &tegra_dvfs_virtual_cpu_dvfs,
+};
+
+static struct clk tegra_clk_hclk = {
+	.name		= "hclk",
+	.flags		= DIV_BUS,
+	.parent		= &tegra_clk_sclk,
+	.reg		= 0x30,
+	.reg_shift	= 4,
+	.ops		= &tegra_bus_ops,
+	.max_rate       = 240000000,
+};
+
+static struct clk tegra_clk_pclk = {
+	.name		= "pclk",
+	.flags		= DIV_BUS,
+	.parent		= &tegra_clk_hclk,
+	.reg		= 0x30,
+	.reg_shift	= 0,
+	.ops		= &tegra_bus_ops,
+	.max_rate       = 108000000,
+};
+
+static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = {
+	{ .input = &tegra_pll_m, .value = 0},
+	{ .input = &tegra_pll_c, .value = 1},
+	{ .input = &tegra_pll_p, .value = 2},
+	{ .input = &tegra_pll_a_out0, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllm_pllc_pllp_clkm[] = {
+	{ .input = &tegra_pll_m, .value = 0},
+	{ .input = &tegra_pll_c, .value = 1},
+	{ .input = &tegra_pll_p, .value = 2},
+	{ .input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
+	{ .input = &tegra_pll_p, .value = 0},
+	{ .input = &tegra_pll_c, .value = 1},
+	{ .input = &tegra_pll_m, .value = 2},
+	{ .input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllaout0_audio2x_pllp_clkm[] = {
+	{.input = &tegra_pll_a_out0, .value = 0},
+	{.input = &tegra_clk_audio_2x, .value = 1},
+	{.input = &tegra_pll_p, .value = 2},
+	{.input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
+	{.input = &tegra_pll_p, .value = 0},
+	{.input = &tegra_pll_d_out0, .value = 1},
+	{.input = &tegra_pll_c, .value = 2},
+	{.input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_audio_clkm_clk32[] = {
+	{.input = &tegra_pll_p,     .value = 0},
+	{.input = &tegra_pll_c,     .value = 1},
+	{.input = &tegra_clk_audio,     .value = 2},
+	{.input = &tegra_clk_m,     .value = 3},
+	{.input = &tegra_clk_32k,   .value = 4},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
+	{.input = &tegra_pll_p,     .value = 0},
+	{.input = &tegra_pll_c,     .value = 1},
+	{.input = &tegra_pll_m,     .value = 2},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_clk_m[] = {
+	{ .input = &tegra_clk_m, .value = 0},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_out3[] = {
+	{ .input = &tegra_pll_p_out3, .value = 0},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_plld[] = {
+	{ .input = &tegra_pll_d, .value = 0},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_clk_32k[] = {
+	{ .input = &tegra_clk_32k, .value = 0},
+	{ 0, 0},
+};
+
+#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \
+	{						\
+		.name      = _name,			\
+		.lookup    = {				\
+			.dev_id    = _dev,		\
+			.con_id	   = _con,		\
+		},					\
+		.ops       = &tegra_periph_clk_ops,	\
+		.clk_num   = _clk_num,			\
+		.reg       = _reg,			\
+		.inputs    = _inputs,			\
+		.flags     = _flags,			\
+		.max_rate  = _max,			\
+	}
+
+struct clk tegra_periph_clks[] = {
+	PERIPH_CLK("rtc",	"rtc-tegra",		NULL,	4,	0,	32768,     mux_clk_32k,			PERIPH_NO_RESET),
+	PERIPH_CLK("timer",	"timer",		NULL,	5,	0,	26000000,  mux_clk_m,			0),
+	PERIPH_CLK("i2s1",	"i2s.0",		NULL,	11,	0x100,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("i2s2",	"i2s.1",		NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
+	/* FIXME: spdif has 2 clocks but 1 enable */
+	PERIPH_CLK("spdif_out",	"spdif_out",		NULL,	10,	0x108,	100000000, mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("spdif_in",	"spdif_in",		NULL,	10,	0x10c,	100000000, mux_pllp_pllc_pllm,		MUX | DIV_U71),
+	PERIPH_CLK("pwm",	"pwm",			NULL,	17,	0x110,	432000000, mux_pllp_pllc_audio_clkm_clk32,	MUX | DIV_U71),
+	PERIPH_CLK("spi",	"spi",			NULL,	43,	0x114,	40000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("xio",	"xio",			NULL,	45,	0x120,	150000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("twc",	"twc",			NULL,	16,	0x12c,	150000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sbc1",	"spi_tegra.0",		NULL,	41,	0x134,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sbc2",	"spi_tegra.1",		NULL,	44,	0x118,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sbc3",	"spi_tegra.2",		NULL,	46,	0x11c,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sbc4",	"spi_tegra.3",		NULL,	68,	0x1b4,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("ide",	"ide",			NULL,	25,	0x144,	100000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* requires min voltage */
+	PERIPH_CLK("ndflash",	"tegra_nand",		NULL,	13,	0x160,	164000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
+	/* FIXME: vfir shares an enable with uartb */
+	PERIPH_CLK("vfir",	"vfir",			NULL,	7,	0x168,	72000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sdmmc1",	"sdhci-tegra.0",	NULL,	14,	0x150,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
+	PERIPH_CLK("sdmmc2",	"sdhci-tegra.1",	NULL,	9,	0x154,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
+	PERIPH_CLK("sdmmc3",	"sdhci-tegra.2",	NULL,	69,	0x1bc,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
+	PERIPH_CLK("sdmmc4",	"sdhci-tegra.3",	NULL,	15,	0x160,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
+	PERIPH_CLK("vde",	"vde",			NULL,	61,	0x1c8,	250000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage and process_id */
+	PERIPH_CLK("csite",	"csite",		NULL,	73,	0x1d4,	144000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* max rate ??? */
+	/* FIXME: what is la? */
+	PERIPH_CLK("la",	"la",			NULL,	76,	0x1f8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("owr",	"tegra_w1",		NULL,	71,	0x1cc,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("nor",	"nor",			NULL,	42,	0x1d0,	92000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* requires min voltage */
+	PERIPH_CLK("mipi",	"mipi",			NULL,	50,	0x174,	60000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
+	PERIPH_CLK("i2c1",	"tegra-i2c.0",		NULL,	12,	0x124,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
+	PERIPH_CLK("i2c2",	"tegra-i2c.1",		NULL,	54,	0x198,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
+	PERIPH_CLK("i2c3",	"tegra-i2c.2",		NULL,	67,	0x1b8,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
+	PERIPH_CLK("dvc",	"tegra-i2c.3",		NULL,	47,	0x128,	26000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U16),
+	PERIPH_CLK("i2c1_i2c",	"tegra-i2c.0",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
+	PERIPH_CLK("i2c2_i2c",	"tegra-i2c.1",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
+	PERIPH_CLK("i2c3_i2c",	"tegra-i2c.2",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
+	PERIPH_CLK("dvc_i2c",	"tegra-i2c.3",		"i2c",	0,	0,	72000000,  mux_pllp_out3,			0),
+	PERIPH_CLK("uarta",	"uart.0",		NULL,	6,	0x178,	216000000, mux_pllp_pllc_pllm_clkm,	MUX),
+	PERIPH_CLK("uartb",	"uart.1",		NULL,	7,	0x17c,	216000000, mux_pllp_pllc_pllm_clkm,	MUX),
+	PERIPH_CLK("uartc",	"uart.2",		NULL,	55,	0x1a0,	216000000, mux_pllp_pllc_pllm_clkm,	MUX),
+	PERIPH_CLK("uartd",	"uart.3",		NULL,	65,	0x1c0,	216000000, mux_pllp_pllc_pllm_clkm,	MUX),
+	PERIPH_CLK("uarte",	"uart.4",		NULL,	66,	0x1c4,	216000000, mux_pllp_pllc_pllm_clkm,	MUX),
+	PERIPH_CLK("3d",	"3d",			NULL,	24,	0x158,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */
+	PERIPH_CLK("2d",	"2d",			NULL,	21,	0x15c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
+	/* FIXME: vi and vi_sensor share an enable */
+	PERIPH_CLK("vi",	"vi",			NULL,	20,	0x148,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
+	PERIPH_CLK("vi_sensor",	"vi_sensor",		NULL,	20,	0x1a8,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_NO_RESET), /* scales with voltage and process_id */
+	PERIPH_CLK("epp",	"epp",			NULL,	19,	0x16c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
+	PERIPH_CLK("mpe",	"mpe",			NULL,	60,	0x170,	250000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
+	PERIPH_CLK("host1x",	"host1x",		NULL,	28,	0x180,	166000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
+	/* FIXME: cve and tvo share an enable	*/
+	PERIPH_CLK("cve",	"cve",			NULL,	49,	0x140,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
+	PERIPH_CLK("tvo",	"tvo",			NULL,	49,	0x188,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
+	PERIPH_CLK("hdmi",	"hdmi",			NULL,	51,	0x18c,	148500000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
+	PERIPH_CLK("tvdac",	"tvdac",		NULL,	53,	0x194,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
+	PERIPH_CLK("disp1",	"tegrafb.0",		NULL,	27,	0x138,	190000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* scales with voltage and process_id */
+	PERIPH_CLK("disp2",	"tegrafb.1",		NULL,	26,	0x13c,	190000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* scales with voltage and process_id */
+	PERIPH_CLK("usbd",	"fsl-tegra-udc",	NULL,	22,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
+	PERIPH_CLK("usb2",	"tegra-ehci.1",		NULL,	58,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
+	PERIPH_CLK("usb3",	"tegra-ehci.2",		NULL,	59,	0,	480000000, mux_clk_m,			0), /* requires min voltage */
+	PERIPH_CLK("emc",	"emc",			NULL,	57,	0x19c,	800000000, mux_pllm_pllc_pllp_clkm,	MUX | DIV_U71 | PERIPH_EMC_ENB),
+	PERIPH_CLK("dsi",	"dsi",			NULL,	48,	0,	500000000, mux_plld,			0), /* scales with voltage */
+	PERIPH_CLK("csi",	"csi",			NULL,	52,	0,	72000000,  mux_pllp_out3,		0),
+	PERIPH_CLK("isp",	"isp",			NULL,	23,	0,	150000000, mux_clk_m,			0), /* same frequency as VI */
+	PERIPH_CLK("csus",	"csus",			NULL,	92,	0,	150000000, mux_clk_m,			PERIPH_NO_RESET),
+	PERIPH_CLK("pex",       NULL,			"pex",  70,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET),
+	PERIPH_CLK("afi",       NULL,			"afi",  72,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET),
+	PERIPH_CLK("pcie_xclk", NULL,		  "pcie_xclk",  74,     0,	26000000,  mux_clk_m,			PERIPH_MANUAL_RESET),
+};
+
+#define CLK_DUPLICATE(_name, _dev, _con)		\
+	{						\
+		.name	= _name,			\
+		.lookup	= {				\
+			.dev_id	= _dev,			\
+			.con_id		= _con,		\
+		},					\
+	}
+
+/* Some clocks may be used by different drivers depending on the board
+ * configuration.  List those here to register them twice in the clock lookup
+ * table under two names.
+ */
+struct clk_duplicate tegra_clk_duplicates[] = {
+	CLK_DUPLICATE("uarta",	"tegra_uart.0",	NULL),
+	CLK_DUPLICATE("uartb",	"tegra_uart.1",	NULL),
+	CLK_DUPLICATE("uartc",	"tegra_uart.2",	NULL),
+	CLK_DUPLICATE("uartd",	"tegra_uart.3",	NULL),
+	CLK_DUPLICATE("uarte",	"tegra_uart.4",	NULL),
+	CLK_DUPLICATE("host1x", "tegrafb.0", "host1x"),
+	CLK_DUPLICATE("host1x", "tegrafb.1", "host1x"),
+	CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
+};
+
+#define CLK(dev, con, ck)	\
+	{			\
+		.dev_id = dev,	\
+		.con_id = con,	\
+		.clk = ck,	\
+	}
+
+struct clk_lookup tegra_clk_lookups[] = {
+	/* external root sources */
+	CLK(NULL,	"32k_clk",	&tegra_clk_32k),
+	CLK(NULL,	"pll_s",	&tegra_pll_s),
+	CLK(NULL,	"clk_m",	&tegra_clk_m),
+	CLK(NULL,	"pll_m",	&tegra_pll_m),
+	CLK(NULL,	"pll_m_out1",	&tegra_pll_m_out1),
+	CLK(NULL,	"pll_c",	&tegra_pll_c),
+	CLK(NULL,	"pll_c_out1",	&tegra_pll_c_out1),
+	CLK(NULL,	"pll_p",	&tegra_pll_p),
+	CLK(NULL,	"pll_p_out1",	&tegra_pll_p_out1),
+	CLK(NULL,	"pll_p_out2",	&tegra_pll_p_out2),
+	CLK(NULL,	"pll_p_out3",	&tegra_pll_p_out3),
+	CLK(NULL,	"pll_p_out4",	&tegra_pll_p_out4),
+	CLK(NULL,	"pll_a",	&tegra_pll_a),
+	CLK(NULL,	"pll_a_out0",	&tegra_pll_a_out0),
+	CLK(NULL,	"pll_d",	&tegra_pll_d),
+	CLK(NULL,	"pll_d_out0",	&tegra_pll_d_out0),
+	CLK(NULL,	"pll_u",	&tegra_pll_u),
+	CLK(NULL,	"pll_x",	&tegra_pll_x),
+	CLK(NULL,	"pll_e",	&tegra_pll_e),
+	CLK(NULL,	"cclk",		&tegra_clk_cclk),
+	CLK(NULL,	"sclk",		&tegra_clk_sclk),
+	CLK(NULL,	"hclk",		&tegra_clk_hclk),
+	CLK(NULL,	"pclk",		&tegra_clk_pclk),
+	CLK(NULL,	"clk_d",	&tegra_clk_d),
+	CLK(NULL,	"cpu",		&tegra_clk_virtual_cpu),
+};
+
+void __init tegra2_init_clocks(void)
+{
+	int i;
+	struct clk_lookup *cl;
+	struct clk *c;
+	struct clk_duplicate *cd;
+
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_lookups); i++) {
+		cl = &tegra_clk_lookups[i];
+		clk_init(cl->clk);
+		clkdev_add(cl);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tegra_periph_clks); i++) {
+		c = &tegra_periph_clks[i];
+		cl = &c->lookup;
+		cl->clk = c;
+
+		clk_init(cl->clk);
+		clkdev_add(cl);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
+		cd = &tegra_clk_duplicates[i];
+		c = tegra_get_clock_by_name(cd->name);
+		if (c) {
+			cl = &cd->lookup;
+			cl->clk = c;
+			clkdev_add(cl);
+		} else {
+			pr_err("%s: Unknown duplicate clock %s\n", __func__,
+				cd->name);
+		}
+	}
+
+	init_audio_sync_clock_mux();
+}
+
+#ifdef CONFIG_PM
+static u32 clk_rst_suspend[RST_DEVICES_NUM + CLK_OUT_ENB_NUM +
+			   PERIPH_CLK_SOURCE_NUM + 3];
+
+void tegra_clk_suspend(void)
+{
+	unsigned long off, i;
+	u32 *ctx = clk_rst_suspend;
+
+	*ctx++ = clk_readl(OSC_CTRL) & OSC_CTRL_MASK;
+
+	for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC;
+			off += 4) {
+		if (off == PERIPH_CLK_SOURCE_EMC)
+			continue;
+		*ctx++ = clk_readl(off);
+	}
+
+	off = RST_DEVICES;
+	for (i = 0; i < RST_DEVICES_NUM; i++, off += 4)
+		*ctx++ = clk_readl(off);
+
+	off = CLK_OUT_ENB;
+	for (i = 0; i < CLK_OUT_ENB_NUM; i++, off += 4)
+		*ctx++ = clk_readl(off);
+
+	*ctx++ = clk_readl(MISC_CLK_ENB);
+	*ctx++ = clk_readl(CLK_MASK_ARM);
+}
+
+void tegra_clk_resume(void)
+{
+	unsigned long off, i;
+	const u32 *ctx = clk_rst_suspend;
+	u32 val;
+
+	val = clk_readl(OSC_CTRL) & ~OSC_CTRL_MASK;
+	val |= *ctx++;
+	clk_writel(val, OSC_CTRL);
+
+	/* enable all clocks before configuring clock sources */
+	clk_writel(0xbffffff9ul, CLK_OUT_ENB);
+	clk_writel(0xfefffff7ul, CLK_OUT_ENB + 4);
+	clk_writel(0x77f01bfful, CLK_OUT_ENB + 8);
+	wmb();
+
+	for (off = PERIPH_CLK_SOURCE_I2S1; off <= PERIPH_CLK_SOURCE_OSC;
+			off += 4) {
+		if (off == PERIPH_CLK_SOURCE_EMC)
+			continue;
+		clk_writel(*ctx++, off);
+	}
+	wmb();
+
+	off = RST_DEVICES;
+	for (i = 0; i < RST_DEVICES_NUM; i++, off += 4)
+		clk_writel(*ctx++, off);
+	wmb();
+
+	off = CLK_OUT_ENB;
+	for (i = 0; i < CLK_OUT_ENB_NUM; i++, off += 4)
+		clk_writel(*ctx++, off);
+	wmb();
+
+	clk_writel(*ctx++, MISC_CLK_ENB);
+	clk_writel(*ctx++, CLK_MASK_ARM);
+}
+#endif
diff --git a/arch/arm/mach-tegra/tegra2_dvfs.c b/arch/arm/mach-tegra/tegra2_dvfs.c
new file mode 100644
index 000000000000..5529c238dd77
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra2_dvfs.c
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-tegra/tegra2_dvfs.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include "clock.h"
+#include "tegra2_dvfs.h"
+
+static struct dvfs_table virtual_cpu_process_0[] = {
+	{314000000,  750},
+	{456000000,  825},
+	{608000000,  900},
+	{760000000,  975},
+	{817000000,  1000},
+	{912000000,  1050},
+	{1000000000, 1100},
+	{0, 0},
+};
+
+static struct dvfs_table virtual_cpu_process_1[] = {
+	{314000000,  750},
+	{456000000,  825},
+	{618000000,  900},
+	{770000000,  975},
+	{827000000,  1000},
+	{922000000,  1050},
+	{1000000000, 1100},
+	{0, 0},
+};
+
+static struct dvfs_table virtual_cpu_process_2[] = {
+	{494000000,  750},
+	{675000000,  825},
+	{817000000,  875},
+	{922000000,  925},
+	{1000000000, 975},
+	{0, 0},
+};
+
+static struct dvfs_table virtual_cpu_process_3[] = {
+	{730000000,  750},
+	{760000000,  775},
+	{845000000,  800},
+	{1000000000, 875},
+	{0, 0},
+};
+
+struct dvfs tegra_dvfs_virtual_cpu_dvfs = {
+	.reg_id = "vdd_cpu",
+	.process_id_table = {
+		{
+			.process_id = 0,
+			.table = virtual_cpu_process_0,
+		},
+		{
+			.process_id = 1,
+			.table = virtual_cpu_process_1,
+		},
+		{
+			.process_id = 2,
+			.table = virtual_cpu_process_2,
+		},
+		{
+			.process_id = 3,
+			.table = virtual_cpu_process_3,
+		},
+	},
+	.process_id_table_length = 4,
+	.cpu = 1,
+};
diff --git a/arch/arm/mach-tegra/tegra2_dvfs.h b/arch/arm/mach-tegra/tegra2_dvfs.h
new file mode 100644
index 000000000000..f8c1adba96a6
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra2_dvfs.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-tegra/tegra2_dvfs.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+extern struct dvfs tegra_dvfs_virtual_cpu_dvfs;
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
new file mode 100644
index 000000000000..9057d6fd1d31
--- /dev/null
+++ b/arch/arm/mach-tegra/timer.c
@@ -0,0 +1,186 @@
+/*
+ * arch/arch/mach-tegra/timer.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cnt32_to_63.h>
+
+#include <asm/mach/time.h>
+#include <asm/localtimer.h>
+
+#include <mach/iomap.h>
+#include <mach/irqs.h>
+
+#include "board.h"
+#include "clock.h"
+
+#define TIMERUS_CNTR_1US 0x10
+#define TIMERUS_USEC_CFG 0x14
+#define TIMERUS_CNTR_FREEZE 0x4c
+
+#define TIMER1_BASE 0x0
+#define TIMER2_BASE 0x8
+#define TIMER3_BASE 0x50
+#define TIMER4_BASE 0x58
+
+#define TIMER_PTV 0x0
+#define TIMER_PCR 0x4
+
+struct tegra_timer;
+
+static void __iomem *timer_reg_base = IO_ADDRESS(TEGRA_TMR1_BASE);
+
+#define timer_writel(value, reg) \
+	__raw_writel(value, (u32)timer_reg_base + (reg))
+#define timer_readl(reg) \
+	__raw_readl((u32)timer_reg_base + (reg))
+
+static int tegra_timer_set_next_event(unsigned long cycles,
+					 struct clock_event_device *evt)
+{
+	u32 reg;
+
+	reg = 0x80000000 | ((cycles > 1) ? (cycles-1) : 0);
+	timer_writel(reg, TIMER3_BASE + TIMER_PTV);
+
+	return 0;
+}
+
+static void tegra_timer_set_mode(enum clock_event_mode mode,
+				    struct clock_event_device *evt)
+{
+	u32 reg;
+
+	timer_writel(0, TIMER3_BASE + TIMER_PTV);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		reg = 0xC0000000 | ((1000000/HZ)-1);
+		timer_writel(reg, TIMER3_BASE + TIMER_PTV);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static cycle_t tegra_clocksource_read(struct clocksource *cs)
+{
+	return cnt32_to_63(timer_readl(TIMERUS_CNTR_1US));
+}
+
+static struct clock_event_device tegra_clockevent = {
+	.name		= "timer0",
+	.rating		= 300,
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.set_next_event	= tegra_timer_set_next_event,
+	.set_mode	= tegra_timer_set_mode,
+};
+
+static struct clocksource tegra_clocksource = {
+	.name	= "timer_us",
+	.rating	= 300,
+	.read	= tegra_clocksource_read,
+	.mask	= 0x7FFFFFFFFFFFFFFFULL,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+unsigned long long sched_clock(void)
+{
+	return clocksource_cyc2ns(tegra_clocksource.read(&tegra_clocksource),
+		tegra_clocksource.mult, tegra_clocksource.shift);
+}
+
+static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+	timer_writel(1<<30, TIMER3_BASE + TIMER_PCR);
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction tegra_timer_irq = {
+	.name		= "timer0",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_HIGH,
+	.handler	= tegra_timer_interrupt,
+	.dev_id		= &tegra_clockevent,
+	.irq		= INT_TMR3,
+};
+
+static void __init tegra_init_timer(void)
+{
+	unsigned long rate = clk_measure_input_freq();
+	int ret;
+
+#ifdef CONFIG_HAVE_ARM_TWD
+	twd_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x600);
+#endif
+
+	switch (rate) {
+	case 12000000:
+		timer_writel(0x000b, TIMERUS_USEC_CFG);
+		break;
+	case 13000000:
+		timer_writel(0x000c, TIMERUS_USEC_CFG);
+		break;
+	case 19200000:
+		timer_writel(0x045f, TIMERUS_USEC_CFG);
+		break;
+	case 26000000:
+		timer_writel(0x0019, TIMERUS_USEC_CFG);
+		break;
+	default:
+		WARN(1, "Unknown clock rate");
+	}
+
+	if (clocksource_register_hz(&tegra_clocksource, 1000000)) {
+		printk(KERN_ERR "Failed to register clocksource\n");
+		BUG();
+	}
+
+	ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq);
+	if (ret) {
+		printk(KERN_ERR "Failed to register timer IRQ: %d\n", ret);
+		BUG();
+	}
+
+	clockevents_calc_mult_shift(&tegra_clockevent, 1000000, 5);
+	tegra_clockevent.max_delta_ns =
+		clockevent_delta2ns(0x1fffffff, &tegra_clockevent);
+	tegra_clockevent.min_delta_ns =
+		clockevent_delta2ns(0x1, &tegra_clockevent);
+	tegra_clockevent.cpumask = cpu_all_mask;
+	tegra_clockevent.irq = tegra_timer_irq.irq;
+	clockevents_register_device(&tegra_clockevent);
+
+	return;
+}
+
+struct sys_timer tegra_timer = {
+	.init = tegra_init_timer,
+};
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 5af71d5ba665..7458fc6df5c6 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -66,7 +66,7 @@ static DEFINE_SPINLOCK(syscon_resetreg_lock);
  *  AMBA bus
  *  |
  *  +- CPU
- *  +- NANDIF NAND Flash interface
+ *  +- FSMC NANDIF NAND Flash interface
  *  +- SEMI Shared Memory interface
  *  +- ISP Image Signal Processor (U335 only)
  *  +- CDS (U335 only)
@@ -726,7 +726,7 @@ static struct clk cpu_clk = {
 };
 
 static struct clk nandif_clk = {
-	.name       = "NANDIF",
+	.name       = "FSMC",
 	.parent	    = &amba_clk,
 	.hw_ctrld   = false,
 	.reset	    = true,
@@ -947,6 +947,10 @@ static struct clk fast_clk = {
 	.lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
 };
 
+/*
+ * The MMCI apb_pclk is hardwired to the same terminal as the
+ * external MCI clock. Thus this will be referenced twice.
+ */
 static struct clk mmcsd_clk = {
 	.name       = "MCLK",
 	.parent	    = &fast_clk,
@@ -1024,6 +1028,10 @@ static struct clk i2c1_clk = {
 	.lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
 };
 
+/*
+ * The SPI apb_pclk is hardwired to the same terminal as the
+ * external SPI clock. Thus this will be referenced twice.
+ */
 static struct clk spi_clk = {
 	.name       = "SPI",
 	.parent	    = &fast_clk,
@@ -1040,10 +1048,9 @@ static struct clk spi_clk = {
 };
 
 #ifdef CONFIG_MACH_U300_BS335
-static struct clk uart1_clk = {
-	.name	    = "UART1",
+static struct clk uart1_pclk = {
+	.name	    = "UART1_PCLK",
 	.parent	    = &fast_clk,
-	.rate	    = 13000000,
 	.hw_ctrld   = false,
 	.reset	    = true,
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
@@ -1051,6 +1058,14 @@ static struct clk uart1_clk = {
 	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock),
+};
+
+/* This one is hardwired to PLL13 */
+static struct clk uart1_clk = {
+	.name	    = "UART1_CLK",
+	.rate	    = 13000000,
+	.hw_ctrld   = true,
 	.lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
 };
 #endif
@@ -1085,11 +1100,9 @@ static struct clk wdog_clk = {
 	.lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
 };
 
-/* This one is hardwired to PLL13 */
-static struct clk uart_clk = {
-	.name	    = "UARTCLK",
+static struct clk uart0_pclk = {
+	.name	    = "UART0_PCLK",
 	.parent	    = &slow_clk,
-	.rate	    = 13000000,
 	.hw_ctrld   = false,
 	.reset	    = true,
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
@@ -1097,7 +1110,16 @@ static struct clk uart_clk = {
 	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
 	.enable     = syscon_clk_enable,
 	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
+	.lock       = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock),
+};
+
+/* This one is hardwired to PLL13 */
+static struct clk uart0_clk = {
+	.name	    = "UART0_CLK",
+	.parent	    = &slow_clk,
+	.rate	    = 13000000,
+	.hw_ctrld   = true,
+	.lock       = __SPIN_LOCK_UNLOCKED(uart0_clk.lock),
 };
 
 static struct clk keypad_clk = {
@@ -1182,10 +1204,14 @@ static struct clk timer_clk = {
 	.lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
 };
 
+/*
+ * There is a binary divider in the hardware that divides
+ * the 13MHz PLL by 13 down to 1 MHz.
+ */
 static struct clk app_timer_clk = {
 	.name       = "TIMER_APP",
 	.parent	    = &slow_clk,
-	.rate       = 13000000,
+	.rate       = 1000000,
 	.hw_ctrld   = true,
 	.reset	    = true,
 	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
@@ -1218,6 +1244,13 @@ static struct clk ppm_clk = {
 	.clk = clkref,				\
 	}
 
+#define DEF_LOOKUP_CON(devid, conid, clkref)	\
+	{					\
+	.dev_id = devid,			\
+	.con_id = conid,			\
+	.clk = clkref,				\
+	}
+
 /*
  * Here we only define clocks that are meaningful to
  * look up through clockdevice.
@@ -1226,7 +1259,7 @@ static struct clk_lookup lookups[] = {
 	/* Connected directly to the AMBA bus */
 	DEF_LOOKUP("amba",      &amba_clk),
 	DEF_LOOKUP("cpu",       &cpu_clk),
-	DEF_LOOKUP("fsmc",      &nandif_clk),
+	DEF_LOOKUP("fsmc-nand", &nandif_clk),
 	DEF_LOOKUP("semi",      &semi_clk),
 #ifdef CONFIG_MACH_U300_BS335
 	DEF_LOOKUP("isp",       &isp_clk),
@@ -1241,11 +1274,14 @@ static struct clk_lookup lookups[] = {
 	/* AHB bridge clocks */
 	DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
 	DEF_LOOKUP("intcon",    &intcon_clk),
+	DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk),
 	DEF_LOOKUP("mspro",     &mspro_clk),
 	DEF_LOOKUP("pl172",     &emif_clk),
+	DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk),
 	/* FAST bridge clocks */
 	DEF_LOOKUP("fast",      &fast_clk),
 	DEF_LOOKUP("mmci",      &mmcsd_clk),
+	DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk),
 	/*
 	 * The .0 and .1 identifiers on these comes from the platform device
 	 * .id field and are assigned when the platform devices are registered.
@@ -1255,13 +1291,16 @@ static struct clk_lookup lookups[] = {
 	DEF_LOOKUP("stu300.0",  &i2c0_clk),
 	DEF_LOOKUP("stu300.1",  &i2c1_clk),
 	DEF_LOOKUP("pl022",     &spi_clk),
+	DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk),
 #ifdef CONFIG_MACH_U300_BS335
 	DEF_LOOKUP("uart1",     &uart1_clk),
+	DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk),
 #endif
 	/* SLOW bridge clocks */
 	DEF_LOOKUP("slow",      &slow_clk),
 	DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
-	DEF_LOOKUP("uart0",     &uart_clk),
+	DEF_LOOKUP("uart0",     &uart0_clk),
+	DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk),
 	DEF_LOOKUP("apptimer",  &app_timer_clk),
 	DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
 	DEF_LOOKUP("u300-gpio", &gpio_clk),
@@ -1280,64 +1319,6 @@ static void __init clk_register(void)
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 }
 
-/*
- * These are the clocks for cells registered as primecell drivers
- * on the AMBA bus. These must be on during AMBA device registration
- * since the bus probe will attempt to read magic configuration
- * registers for these devices. If they are deactivated these probes
- * will fail.
- *
- *
- * Please note that on emif, both RAM and NAND is connected in dual
- * RAM phones. On single RAM phones, ram is on semi and NAND on emif.
- *
- */
-void u300_clock_primecells(void)
-{
-	clk_enable(&intcon_clk);
-	clk_enable(&uart_clk);
-#ifdef CONFIG_MACH_U300_BS335
-	clk_enable(&uart1_clk);
-#endif
-	clk_enable(&spi_clk);
-
-	clk_enable(&mmcsd_clk);
-
-}
-EXPORT_SYMBOL(u300_clock_primecells);
-
-void u300_unclock_primecells(void)
-{
-
-	clk_disable(&intcon_clk);
-	clk_disable(&uart_clk);
-#ifdef CONFIG_MACH_U300_BS335
-	clk_disable(&uart1_clk);
-#endif
-	clk_disable(&spi_clk);
-	clk_disable(&mmcsd_clk);
-
-}
-EXPORT_SYMBOL(u300_unclock_primecells);
-
-/*
- * The interrupt controller is enabled before the clock API is registered.
- */
-void u300_enable_intcon_clock(void)
-{
-	clk_enable(&intcon_clk);
-}
-EXPORT_SYMBOL(u300_enable_intcon_clock);
-
-/*
- * The timer is enabled before the clock API is registered.
- */
-void u300_enable_timer_clock(void)
-{
-	clk_enable(&app_timer_clk);
-}
-EXPORT_SYMBOL(u300_enable_timer_clock);
-
 #if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
 /*
  * The following makes it possible to view the status (especially
@@ -1379,11 +1360,13 @@ static struct clk *clks[] = {
 	&spi_clk,
 #ifdef CONFIG_MACH_U300_BS335
 	&uart1_clk,
+	&uart1_pclk,
 #endif
 	/* SLOW bridge clocks */
 	&slow_clk,
 	&wdog_clk,
-	&uart_clk,
+	&uart0_clk,
+	&uart0_pclk,
 	&app_timer_clk,
 	&keypad_clk,
 	&gpio_clk,
@@ -1424,7 +1407,7 @@ static int u300_clocks_show(struct seq_file *s, void *data)
 				chars++;
 			}
 			cdp[32] = '\0';
-			if (clk->get_rate)
+			if (clk->get_rate || clk->rate != 0)
 				seq_printf(s,
 					   "%s%s\t%s\t%d\t%s\t%lu Hz\n",
 					   &cdp[0],
@@ -1433,7 +1416,7 @@ static int u300_clocks_show(struct seq_file *s, void *data)
 					   clk->usecount ? "ON" : "OFF",
 					   clk->usecount,
 					   clk->hw_ctrld  ? "YES" : "NO ",
-					   clk->get_rate(clk));
+					   clk_get_rate(clk));
 			else
 				seq_printf(s,
 					   "%s%s\t%s\t%d\t%s\t" \
@@ -1477,7 +1460,7 @@ static int __init init_clk_read_debugfs(void)
 module_init(init_clk_read_debugfs);
 #endif
 
-static int __init u300_clock_init(void)
+int __init u300_clock_init(void)
 {
 	u16 val;
 
@@ -1514,10 +1497,8 @@ static int __init u300_clock_init(void)
 	 */
 	syscon_block_reset_disable(&semi_clk);
 	syscon_block_reset_disable(&emif_clk);
-	semi_clk.enable(&semi_clk);
-	emif_clk.enable(&emif_clk);
+	clk_enable(&semi_clk);
+	clk_enable(&emif_clk);
 
 	return 0;
 }
-/* initialize clocking early to be available later in the boot */
-core_initcall(u300_clock_init);
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
index fc6d9ccfe7e3..c34f3ea3017c 100644
--- a/arch/arm/mach-u300/clock.h
+++ b/arch/arm/mach-u300/clock.h
@@ -45,9 +45,6 @@ struct clk {
 	void (*disable) (struct clk *);
 };
 
-void u300_clock_primecells(void);
-void u300_unclock_primecells(void);
-void u300_enable_intcon_clock(void);
-void u300_enable_timer_clock(void);
+int u300_clock_init(void);
 
 #endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 5f34eb674d68..aa53ee22438f 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -19,7 +19,10 @@
 #include <linux/amba/bus.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <mach/coh901318.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/fsmc.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -28,6 +31,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/coh901318.h>
 #include <mach/hardware.h>
 #include <mach/syscon.h>
 #include <mach/dma_channels.h>
@@ -283,6 +287,13 @@ static struct resource rtc_resources[] = {
  */
 static struct resource fsmc_resources[] = {
 	{
+		.name  = "nand_data",
+		.start = U300_NAND_CS0_PHYS_BASE,
+		.end   = U300_NAND_CS0_PHYS_BASE + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name  = "fsmc_regs",
 		.start = U300_NAND_IF_PHYS_BASE,
 		.end   = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
@@ -1427,11 +1438,39 @@ static struct platform_device rtc_device = {
 	.resource = rtc_resources,
 };
 
-static struct platform_device fsmc_device = {
-	.name = "nandif",
+static struct mtd_partition u300_partitions[] = {
+	{
+		.name = "bootrecords",
+		.offset = 0,
+		.size = SZ_128K,
+	},
+	{
+		.name = "free",
+		.offset = SZ_128K,
+		.size = 8064 * SZ_1K,
+	},
+	{
+		.name = "platform",
+		.offset = 8192 * SZ_1K,
+		.size = 253952 * SZ_1K,
+	},
+};
+
+static struct fsmc_nand_platform_data nand_platform_data = {
+	.partitions = u300_partitions,
+	.nr_partitions = ARRAY_SIZE(u300_partitions),
+	.options = NAND_SKIP_BBTSCAN,
+	.width = FSMC_NAND_BW8,
+};
+
+static struct platform_device nand_device = {
+	.name = "fsmc-nand",
 	.id = -1,
-	.num_resources = ARRAY_SIZE(fsmc_resources),
 	.resource = fsmc_resources,
+	.num_resources = ARRAY_SIZE(fsmc_resources),
+	.dev = {
+		.platform_data = &nand_platform_data,
+	},
 };
 
 static struct platform_device ave_device = {
@@ -1463,7 +1502,7 @@ static struct platform_device *platform_devs[] __initdata = {
 	&keypad_device,
 	&rtc_device,
 	&gpio_device,
-	&fsmc_device,
+	&nand_device,
 	&wdog_device,
 	&ave_device
 };
@@ -1477,11 +1516,19 @@ static struct platform_device *platform_devs[] __initdata = {
 void __init u300_init_irq(void)
 {
 	u32 mask[2] = {0, 0};
+	struct clk *clk;
 	int i;
 
+	/* initialize clocking early, we want to clock the INTCON */
+	u300_clock_init();
+
+	/* Clock the interrupt controller */
+	clk = clk_get_sys("intcon", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_enable(clk);
+
 	for (i = 0; i < NR_IRQS; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
-	u300_enable_intcon_clock();
 	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
 	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
 }
@@ -1561,13 +1608,6 @@ static void __init u300_init_check_chip(void)
 	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
 	       "(chip ID 0x%04x)\n", chipname, val);
 
-#ifdef CONFIG_MACH_U300_BS26
-	if ((val & 0xFF00U) != 0xc800) {
-		printk(KERN_ERR "Platform configured for BS25/BS26 " \
-		       "with DB3150 but %s detected, expect problems!",
-		       chipname);
-	}
-#endif
 #ifdef CONFIG_MACH_U300_BS330
 	if ((val & 0xFF00U) != 0xd800) {
 		printk(KERN_ERR "Platform configured for BS330 " \
@@ -1642,12 +1682,10 @@ void __init u300_init_devices(void)
 	u300_spi_init(&pl022_device);
 
 	/* Register the AMBA devices in the AMBA bus abstraction layer */
-	u300_clock_primecells();
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
 		amba_device_register(d, &iomem_resource);
 	}
-	u300_unclock_primecells();
 
 	u300_assign_physmem();
 
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
index 5f55012b7c9e..03f793612594 100644
--- a/arch/arm/mach-u300/dummyspichip.c
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -46,7 +46,6 @@ static ssize_t dummy_looptest(struct device *dev,
 	 * struct, this is just used here to alter the behaviour of the chip
 	 * in order to perform tests.
 	 */
-	struct pl022_config_chip *chip_info = spi->controller_data;
 	int status;
 	u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
 			0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
@@ -72,7 +71,7 @@ static ssize_t dummy_looptest(struct device *dev,
 	 * Force chip to 8 bit mode
 	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
 	 */
-	chip_info->data_size = SSP_DATA_BITS_8;
+	spi->bits_per_word = 8;
 	/* You should NOT DO THIS EITHER */
 	spi->master->setup(spi);
 
@@ -159,7 +158,7 @@ static ssize_t dummy_looptest(struct device *dev,
 	 * Force chip to 16 bit mode
 	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
 	 */
-	chip_info->data_size = SSP_DATA_BITS_16;
+	spi->bits_per_word = 16;
 	/* You should NOT DO THIS EITHER */
 	spi->master->setup(spi);
 
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 5f61fd45a0c8..d92790140fe5 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -523,7 +523,7 @@ static void gpio_set_initial_values(void)
 
 	/*
 	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
-	 * to output and 'GPIO_IN' to input for each port. And initalize
+	 * to output and 'GPIO_IN' to input for each port. And initialize
 	 * default value on outputs.
 	 */
 	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index 92c12420256f..df715707bead 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,13 +10,12 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart, rx, tmp
+	.macro	addruart, rp, rv
 	/* If we move the address using MMU, use this. */
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1			@ MMU enabled?
-	ldreq	\rx,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
-	ldrne	\rx,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
-	orr	\rx, \rx, #0x00003000
+	ldr	\rp,	  = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
+	ldr	\rv,	  = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
+	orr	\rp, \rp, #0x00003000
+	orr	\rv, \rv, #0x00003000
 	.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index 7b1fc984abb6..d5a71abcbaea 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -273,6 +273,9 @@ extern void gpio_pullup(unsigned gpio, int value);
 extern int gpio_get_value(unsigned gpio);
 extern void gpio_set_value(unsigned gpio, int value);
 
+#define gpio_get_value_cansleep gpio_get_value
+#define gpio_set_value_cansleep gpio_set_value
+
 /* wrappers to sleep-enable the previous two functions */
 static inline unsigned gpio_to_irq(unsigned gpio)
 {
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index ab000df7fc03..bf134bcc129d 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -35,14 +35,6 @@
 #endif
 
 /*
- * TCM memory whereabouts
- */
-#define ITCM_OFFSET	0xffff2000
-#define ITCM_END	0xffff3fff
-#define DTCM_OFFSET	0xffff4000
-#define DTCM_END	0xffff5fff
-
-/*
  * We enable a real big DMA buffer if need be.
  */
 #define CONSISTENT_DMA_SIZE SZ_4M
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 56721a0cd2af..8b85df4c8d8f 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -20,11 +20,9 @@
 
 /* NAND Flash CS0 */
 #define U300_NAND_CS0_PHYS_BASE		0x80000000
-#define U300_NAND_CS0_VIRT_BASE		0xff040000
 
 /* NFIF */
 #define U300_NAND_IF_PHYS_BASE		0x9f800000
-#define U300_NAND_IF_VIRT_BASE		0xff030000
 
 /* AHB Peripherals */
 #define U300_AHB_PER_PHYS_BASE		0xa0000000
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 88506d030596..de1ac9ad2213 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -74,16 +74,16 @@ static void _mmci_callback(struct work_struct *ws)
 
 	mdelay(20);
 
-	mmci_card->mmc_inserted = !!gpio_get_value(U300_GPIO_PIN_MMC_CD);
+	mmci_card->mmc_inserted = !gpio_get_value(U300_GPIO_PIN_MMC_CD);
 
 	input_report_switch(mmci_card->mmc_input, KEY_INSERT,
-			    !mmci_card->mmc_inserted);
+			    mmci_card->mmc_inserted);
 	input_sync(mmci_card->mmc_input);
 
 	pr_debug("MMC/SD card was %s\n",
-		 mmci_card->mmc_inserted ? "removed" : "inserted");
+		 mmci_card->mmc_inserted ? "inserted" : "removed");
 
-	enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, !mmci_card->mmc_inserted);
+	enable_irq_on_gpio_pin(U300_GPIO_PIN_MMC_CD, mmci_card->mmc_inserted);
 }
 
 int __devinit mmc_init(struct amba_device *adev)
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
index f0e887bea30e..00869def5420 100644
--- a/arch/arm/mach-u300/spi.c
+++ b/arch/arm/mach-u300/spi.c
@@ -30,8 +30,6 @@ static void select_dummy_chip(u32 chipselect)
 }
 
 struct pl022_config_chip dummy_chip_info = {
-	/* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */
-	.lbm = LOOPBACK_ENABLED,
 	/*
 	 * available POLLING_TRANSFER and INTERRUPT_TRANSFER,
 	 * DMA_TRANSFER does not work
@@ -42,14 +40,8 @@ struct pl022_config_chip dummy_chip_info = {
 	.hierarchy = SSP_MASTER,
 	/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
 	.slave_tx_disable = 0,
-	/* LSB first */
-	.endian_tx = SSP_TX_LSB,
-	.endian_rx = SSP_RX_LSB,
-	.data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */
 	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
 	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
-	.clk_phase = SSP_CLK_SECOND_EDGE,
-	.clk_pol = SSP_CLK_POL_IDLE_LOW,
 	.ctrl_len = SSP_BITS_12,
 	.wait_state = SSP_MWIRE_WAIT_ZERO,
 	.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
@@ -75,7 +67,7 @@ static struct spi_board_info u300_spi_devices[] = {
 		.bus_num        = 0, /* Only one bus on this chip */
 		.chip_select    = 0,
 		/* Means SPI_CS_HIGH, change if e.g low CS */
-		.mode           = 0,
+		.mode           = SPI_MODE_1 | SPI_LOOP,
 	},
 #endif
 };
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 26d26f5100fe..3fc4472719be 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -15,6 +15,8 @@
 #include <linux/clocksource.h>
 #include <linux/types.h>
 #include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 
 #include <mach/hardware.h>
 
@@ -23,7 +25,8 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include "clock.h"
+/* Be able to sleep for atleast 4 seconds (usually more) */
+#define APPTIMER_MIN_RANGE 4
 
 /*
  * APP side special timer registers
@@ -307,8 +310,6 @@ static struct clock_event_device clockevent_u300_1mhz = {
 	.name           = "GPT1",
 	.rating         = 300, /* Reasonably fast and accurate clock event */
 	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	/* 22 calculated using the algorithm in arch/mips/kernel/time.c */
-	.shift          = 22,
 	.set_next_event = u300_set_next_event,
 	.set_mode       = u300_set_mode,
 };
@@ -341,8 +342,6 @@ static struct clocksource clocksource_u300_1mhz = {
 	.rating         = 300, /* Reasonably fast and accurate clock source */
 	.read           = u300_get_cycles,
 	.mask           = CLOCKSOURCE_MASK(32), /* 32 bits */
-	/* 22 calculated using the algorithm in arch/mips/kernel/time.c */
-	.shift          = 22,
 	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -367,7 +366,15 @@ unsigned long long notrace sched_clock(void)
  */
 static void __init u300_timer_init(void)
 {
-	u300_enable_timer_clock();
+	struct clk *clk;
+	unsigned long rate;
+
+	/* Clock the interrupt controller */
+	clk = clk_get_sys("apptimer", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_enable(clk);
+	rate = clk_get_rate(clk);
+
 	/*
 	 * Disable the "OS" and "DD" timers - these are designed for Symbian!
 	 * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
@@ -405,15 +412,14 @@ static void __init u300_timer_init(void)
 	writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
 		U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
 
-	/* This is a pure microsecond clock source */
-	clocksource_u300_1mhz.mult =
-		clocksource_khz2mult(1000, clocksource_u300_1mhz.shift);
+	clocksource_calc_mult_shift(&clocksource_u300_1mhz,
+				    rate, APPTIMER_MIN_RANGE);
 	if (clocksource_register(&clocksource_u300_1mhz))
 		printk(KERN_ERR "timer: failed to initialize clock "
 		       "source %s\n", clocksource_u300_1mhz.name);
 
-	clockevent_u300_1mhz.mult =
-		div_sc(1000000, NSEC_PER_SEC, clockevent_u300_1mhz.shift);
+	clockevents_calc_mult_shift(&clockevent_u300_1mhz,
+				    rate, APPTIMER_MIN_RANGE);
 	/* 32bit counter, so 32bits delta is max */
 	clockevent_u300_1mhz.max_delta_ns =
 		clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index d2a0b8847a18..07c35a846424 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/memblock.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
@@ -22,6 +23,21 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+static void __init u300_reserve(void)
+{
+	/*
+	 * U300 - This platform family can share physical memory
+	 * between two ARM cpus, one running Linux and the other
+	 * running another OS.
+	 */
+#ifdef CONFIG_MACH_U300_SINGLE_RAM
+#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \
+	CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
+        memblock_reserve(PHYS_OFFSET, 0x00100000);
+#endif
+#endif
+}
+
 static void __init u300_init_machine(void)
 {
 	u300_init_devices();
@@ -45,10 +61,9 @@ static void __init u300_init_machine(void)
 
 MACHINE_START(U300, MACH_U300_STRING)
 	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
-	.phys_io	= U300_AHB_PER_PHYS_BASE,
-	.io_pg_offst	= ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= BOOT_PARAMS_OFFSET,
 	.map_io		= u300_map_io,
+	.reserve	= u300_reserve,
 	.init_irq	= u300_init_irq,
 	.timer		= &u300_timer,
 	.init_machine	= u300_init_machine,
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 6625e5bbf4d6..2dd44a0b4615 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -21,9 +21,7 @@ config MACH_U8500_MOP
 	bool "U8500 Development platform"
 	select UX500_SOC_DB8500
 	help
-	  Include support for mop500 development platform
-	  based on U8500 architecture. The platform is based
-	  on early drop silicon version of 8500.
+	  Include support for the mop500 development platform.
 
 config MACH_U5500
 	bool "U5500 Development platform"
@@ -39,4 +37,18 @@ config UX500_DEBUG_UART
 	  Choose the UART on which kernel low-level debug messages should be
 	  output.
 
+config U5500_MODEM_IRQ
+	bool "Modem IRQ support"
+	depends on MACH_U5500
+	default y
+	help
+	  Add support for handling IRQ:s from modem side
+
+config U5500_MBOX
+	bool "Mailbox support"
+	depends on MACH_U5500 && U5500_MODEM_IRQ
+	default y
+	help
+	  Add support for U5500 mailbox communication with modem side
+
 endif
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 4556aea9c3c5..9e27a84433cb 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -4,8 +4,12 @@
 
 obj-y				:= clock.o cpu.o devices.o
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o
-obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
-obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o
+obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o
+obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o board-mop500-sdi.o
 obj-$(CONFIG_MACH_U5500)	+= board-u5500.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
+obj-$(CONFIG_REGULATOR_AB8500)	+= board-mop500-regulators.o
+obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem_irq.o
+obj-$(CONFIG_U5500_MBOX)	+= mbox.o
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
new file mode 100644
index 000000000000..1187f1fc2e53
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * MOP500 board specific initialization for regulators
+ */
+#include <linux/kernel.h>
+#include <linux/regulator/machine.h>
+
+/* supplies to the display/camera */
+static struct regulator_init_data ab8500_vaux1_regulator = {
+	.constraints = {
+		.name = "V-DISPLAY",
+		.min_uV = 2500000,
+		.max_uV = 2900000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+					REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supplies to the on-board eMMC */
+static struct regulator_init_data ab8500_vaux2_regulator = {
+	.constraints = {
+		.name = "V-eMMC1",
+		.min_uV = 1100000,
+		.max_uV = 3300000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+					REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for VAUX3, supplies to SDcard slots */
+static struct regulator_init_data ab8500_vaux3_regulator = {
+	.constraints = {
+		.name = "V-MMC-SD",
+		.min_uV = 1100000,
+		.max_uV = 3300000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|
+					REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for tvout, gpadc, TVOUT LDO */
+static struct regulator_init_data ab8500_vtvout_init = {
+	.constraints = {
+		.name = "V-TVOUT",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for ab8500-vaudio, VAUDIO LDO */
+static struct regulator_init_data ab8500_vaudio_init = {
+	.constraints = {
+		.name = "V-AUD",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-anamic1 VAMic1-LDO */
+static struct regulator_init_data ab8500_vamic1_init = {
+	.constraints = {
+		.name = "V-AMIC1",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
+static struct regulator_init_data ab8500_vamic2_init = {
+	.constraints = {
+		.name = "V-AMIC2",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-dmic, VDMIC LDO */
+static struct regulator_init_data ab8500_vdmic_init = {
+	.constraints = {
+		.name = "V-DMIC",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for v-intcore12, VINTCORE12 LDO */
+static struct regulator_init_data ab8500_vintcore_init = {
+	.constraints = {
+		.name = "V-INTCORE",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* supply for U8500 CSI/DSI, VANA LDO */
+static struct regulator_init_data ab8500_vana_init = {
+	.constraints = {
+		.name = "V-CSI/DSI",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
new file mode 100644
index 000000000000..bac995665b58
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/mmci.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+
+#include <plat/pincfg.h>
+#include <mach/devices.h>
+#include <mach/hardware.h>
+
+#include "pins-db8500.h"
+#include "board-mop500.h"
+
+static pin_cfg_t mop500_sdi_pins[] = {
+	/* SDI4 (on-board eMMC) */
+	GPIO197_MC4_DAT3,
+	GPIO198_MC4_DAT2,
+	GPIO199_MC4_DAT1,
+	GPIO200_MC4_DAT0,
+	GPIO201_MC4_CMD,
+	GPIO202_MC4_FBCLK,
+	GPIO203_MC4_CLK,
+	GPIO204_MC4_DAT7,
+	GPIO205_MC4_DAT6,
+	GPIO206_MC4_DAT5,
+	GPIO207_MC4_DAT4,
+};
+
+static pin_cfg_t mop500_sdi2_pins[] = {
+	/* SDI2 (POP eMMC) */
+	GPIO128_MC2_CLK,
+	GPIO129_MC2_CMD,
+	GPIO130_MC2_FBCLK,
+	GPIO131_MC2_DAT0,
+	GPIO132_MC2_DAT1,
+	GPIO133_MC2_DAT2,
+	GPIO134_MC2_DAT3,
+	GPIO135_MC2_DAT4,
+	GPIO136_MC2_DAT5,
+	GPIO137_MC2_DAT6,
+	GPIO138_MC2_DAT7,
+};
+
+/*
+ * SDI 2 (POP eMMC, not on DB8500ed)
+ */
+
+static struct mmci_platform_data mop500_sdi2_data = {
+	.ocr_mask	= MMC_VDD_165_195,
+	.f_max		= 100000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+	.gpio_cd	= -1,
+	.gpio_wp	= -1,
+};
+
+/*
+ * SDI 4 (on-board eMMC)
+ */
+
+static struct mmci_platform_data mop500_sdi4_data = {
+	.ocr_mask	= MMC_VDD_29_30,
+	.f_max		= 100000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_MMC_HIGHSPEED,
+	.gpio_cd	= -1,
+	.gpio_wp	= -1,
+};
+
+void mop500_sdi_init(void)
+{
+	nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins));
+
+	u8500_sdi2_device.dev.platform_data = &mop500_sdi2_data;
+	u8500_sdi4_device.dev.platform_data = &mop500_sdi4_data;
+
+	if (!cpu_is_u8500ed()) {
+		nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins));
+		amba_device_register(&u8500_sdi2_device, &iomem_resource);
+	}
+
+	/* On-board eMMC */
+	amba_device_register(&u8500_sdi4_device, &iomem_resource);
+}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bb8d7b771817..cac83a694880 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -13,18 +13,63 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
 #include <linux/spi/spi.h>
+#include <linux/mfd/ab8500.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#include <plat/pincfg.h>
 #include <plat/i2c.h>
+#include <plat/ske.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
+#include <mach/irqs.h>
+
+#include "pins-db8500.h"
+#include "board-mop500.h"
+
+static pin_cfg_t mop500_pins[] = {
+	/* SSP0 */
+	GPIO143_SSP0_CLK,
+	GPIO144_SSP0_FRM,
+	GPIO145_SSP0_RXD,
+	GPIO146_SSP0_TXD,
+
+	/* I2C */
+	GPIO147_I2C0_SCL,
+	GPIO148_I2C0_SDA,
+	GPIO16_I2C1_SCL,
+	GPIO17_I2C1_SDA,
+	GPIO10_I2C2_SDA,
+	GPIO11_I2C2_SCL,
+	GPIO229_I2C3_SDA,
+	GPIO230_I2C3_SCL,
+
+	/* SKE keypad */
+	GPIO153_KP_I7,
+	GPIO154_KP_I6,
+	GPIO155_KP_I5,
+	GPIO156_KP_I4,
+	GPIO157_KP_O7,
+	GPIO158_KP_O6,
+	GPIO159_KP_O5,
+	GPIO160_KP_O4,
+	GPIO161_KP_I3,
+	GPIO162_KP_I2,
+	GPIO163_KP_I1,
+	GPIO164_KP_I0,
+	GPIO165_KP_O3,
+	GPIO166_KP_O2,
+	GPIO167_KP_O1,
+	GPIO168_KP_O0,
+};
 
 static void ab4500_spi_cs_control(u32 command)
 {
@@ -32,31 +77,48 @@ static void ab4500_spi_cs_control(u32 command)
 }
 
 struct pl022_config_chip ab4500_chip_info = {
-	.lbm = LOOPBACK_DISABLED,
 	.com_mode = INTERRUPT_TRANSFER,
 	.iface = SSP_INTERFACE_MOTOROLA_SPI,
 	/* we can act as master only */
 	.hierarchy = SSP_MASTER,
 	.slave_tx_disable = 0,
-	.endian_rx = SSP_RX_MSB,
-	.endian_tx = SSP_TX_MSB,
-	.data_size = SSP_DATA_BITS_24,
 	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
 	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
-	.clk_phase = SSP_CLK_SECOND_EDGE,
-	.clk_pol = SSP_CLK_POL_IDLE_HIGH,
 	.cs_control = ab4500_spi_cs_control,
 };
 
-static struct spi_board_info u8500_spi_devices[] = {
+static struct ab8500_platform_data ab8500_platdata = {
+	.irq_base	= MOP500_AB8500_IRQ_BASE,
+};
+
+static struct resource ab8500_resources[] = {
+	[0] = {
+		.start = IRQ_AB8500,
+		.end = IRQ_AB8500,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+struct platform_device ab8500_device = {
+	.name = "ab8500-i2c",
+	.id = 0,
+	.dev = {
+		.platform_data = &ab8500_platdata,
+	},
+	.num_resources = 1,
+	.resource = ab8500_resources,
+};
+
+static struct spi_board_info ab8500_spi_devices[] = {
 	{
-		.modalias = "ab8500",
+		.modalias = "ab8500-spi",
 		.controller_data = &ab4500_chip_info,
+		.platform_data = &ab8500_platdata,
 		.max_speed_hz = 12000000,
 		.bus_num = 0,
 		.chip_select = 0,
-		.mode = SPI_MODE_0,
-		.irq = IRQ_AB4500,
+		.mode = SPI_MODE_3,
+		.irq = IRQ_DB8500_AB8500,
 	},
 };
 
@@ -106,22 +168,135 @@ static struct amba_device *amba_devs[] __initdata = {
 	&u8500_ssp0_device,
 };
 
+static const unsigned int ux500_keymap[] = {
+	KEY(2, 5, KEY_END),
+	KEY(4, 1, KEY_POWER),
+	KEY(3, 5, KEY_VOLUMEDOWN),
+	KEY(1, 3, KEY_3),
+	KEY(5, 2, KEY_RIGHT),
+	KEY(5, 0, KEY_9),
+
+	KEY(0, 5, KEY_MENU),
+	KEY(7, 6, KEY_ENTER),
+	KEY(4, 5, KEY_0),
+	KEY(6, 7, KEY_2),
+	KEY(3, 4, KEY_UP),
+	KEY(3, 3, KEY_DOWN),
+
+	KEY(6, 4, KEY_SEND),
+	KEY(6, 2, KEY_BACK),
+	KEY(4, 2, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_1),
+	KEY(4, 3, KEY_LEFT),
+	KEY(3, 2, KEY_7),
+};
+
+static const struct matrix_keymap_data ux500_keymap_data = {
+	.keymap         = ux500_keymap,
+	.keymap_size    = ARRAY_SIZE(ux500_keymap),
+};
+
+/*
+ * Nomadik SKE keypad
+ */
+#define ROW_PIN_I0      164
+#define ROW_PIN_I1      163
+#define ROW_PIN_I2      162
+#define ROW_PIN_I3      161
+#define ROW_PIN_I4      156
+#define ROW_PIN_I5      155
+#define ROW_PIN_I6      154
+#define ROW_PIN_I7      153
+#define COL_PIN_O0      168
+#define COL_PIN_O1      167
+#define COL_PIN_O2      166
+#define COL_PIN_O3      165
+#define COL_PIN_O4      160
+#define COL_PIN_O5      159
+#define COL_PIN_O6      158
+#define COL_PIN_O7      157
+
+#define SKE_KPD_MAX_ROWS        8
+#define SKE_KPD_MAX_COLS        8
+
+static int ske_kp_rows[] = {
+	ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
+	ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
+};
+
+/*
+ * ske_set_gpio_row: request and set gpio rows
+ */
+static int ske_set_gpio_row(int gpio)
+{
+	int ret;
+
+	ret = gpio_request(gpio, "ske-kp");
+	if (ret < 0) {
+		pr_err("ske_set_gpio_row: gpio request failed\n");
+		return ret;
+	}
+
+	ret = gpio_direction_output(gpio, 1);
+	if (ret < 0) {
+		pr_err("ske_set_gpio_row: gpio direction failed\n");
+		gpio_free(gpio);
+	}
+
+	return ret;
+}
+
+/*
+ * ske_kp_init - enable the gpio configuration
+ */
+static int ske_kp_init(void)
+{
+	int ret, i;
+
+	for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
+		ret = ske_set_gpio_row(ske_kp_rows[i]);
+		if (ret < 0) {
+			pr_err("ske_kp_init: failed init\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct ske_keypad_platform_data ske_keypad_board = {
+	.init           = ske_kp_init,
+	.keymap_data    = &ux500_keymap_data,
+	.no_autorepeat  = true,
+	.krow           = SKE_KPD_MAX_ROWS,     /* 8x8 matrix */
+	.kcol           = SKE_KPD_MAX_COLS,
+	.debounce_ms    = 40,                   /* in millsecs */
+};
+
+
+
 /* add any platform devices here - TODO */
 static struct platform_device *platform_devs[] __initdata = {
 	&u8500_i2c0_device,
 	&ux500_i2c1_device,
 	&ux500_i2c2_device,
 	&ux500_i2c3_device,
+	&ux500_ske_keypad_device,
 };
 
 static void __init u8500_init_machine(void)
 {
 	int i;
 
+	u8500_init_devices();
+
+	nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
+
 	u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
 	ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
 	ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
 	ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
+	ux500_ske_keypad_device.dev.platform_data = &ske_keypad_board;
 
 	u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
 
@@ -131,16 +306,18 @@ static void __init u8500_init_machine(void)
 
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
-	spi_register_board_info(u8500_spi_devices,
-			ARRAY_SIZE(u8500_spi_devices));
+	mop500_sdi_init();
 
-	u8500_init_devices();
+	/* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */
+	if (cpu_is_u8500ed() || cpu_is_u8500v10())
+		spi_register_board_info(ab8500_spi_devices,
+			ARRAY_SIZE(ab8500_spi_devices));
+	else /* If HW is v.1.1 or later use I2C to access AB8500 */
+		platform_device_register(&ab8500_device);
 }
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
-	.phys_io	= U8500_UART2_BASE,
-	.io_pg_offst	= (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
new file mode 100644
index 000000000000..2d240322fa6f
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __BOARD_MOP500_H
+#define __BOARD_MOP500_H
+
+extern void mop500_sdi_init(void);
+
+#endif
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 4430e69cf538..1ca094a45e71 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -31,8 +31,6 @@ static void __init u5500_init_machine(void)
 }
 
 MACHINE_START(U8500, "ST-Ericsson U5500 Platform")
-	.phys_io	= UX500_UART0_BASE,
-	.io_pg_offst	= (IO_ADDRESS(UX500_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= u5500_map_io,
 	.init_irq	= ux500_init_irq,
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 0a1318fc8e2b..1675047daf20 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -453,7 +453,11 @@ static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
 static DEFINE_PRCC_CLK(7, wdg_ed, 	1, -1, NULL);
 static DEFINE_PRCC_CLK(7, cfgreg_ed, 	0, -1, NULL);
 
+static struct clk clk_dummy_apb_pclk;
+
 static struct clk_lookup u8500_common_clks[] = {
+	CLK(dummy_apb_pclk, NULL,	"apb_pclk"),
+
 	/* Peripheral Cluster #1 */
 	CLK(gpio0,	"gpio.0",	NULL),
 	CLK(gpio0,	"gpio.1",	NULL),
@@ -473,6 +477,7 @@ static struct clk_lookup u8500_common_clks[] = {
 	CLK(sdi5,	"sdi5",		NULL),
 	CLK(uart2,	"uart2",	NULL),
 	CLK(ske,	"ske",		NULL),
+	CLK(ske,	"nmk-ske-keypad",	NULL),
 	CLK(sdi2,	"sdi2",		NULL),
 	CLK(i2c0,	"nmk-i2c.0",	NULL),
 	CLK(fsmc,	"fsmc",		NULL),
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index e9278f6d67aa..2f87075e9d6f 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -14,6 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/devices.h>
 #include <mach/setup.h>
+#include <mach/irqs.h>
 
 static struct map_desc u5500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
@@ -24,6 +25,90 @@ static struct map_desc u5500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
 };
 
+static struct resource mbox0_resources[] = {
+	{
+		.name = "mbox_peer",
+		.start = U5500_MBOX0_PEER_START,
+		.end = U5500_MBOX0_PEER_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_local",
+		.start = U5500_MBOX0_LOCAL_START,
+		.end = U5500_MBOX0_LOCAL_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_irq",
+		.start = MBOX_PAIR0_VIRT_IRQ,
+		.end = MBOX_PAIR0_VIRT_IRQ,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource mbox1_resources[] = {
+	{
+		.name = "mbox_peer",
+		.start = U5500_MBOX1_PEER_START,
+		.end = U5500_MBOX1_PEER_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_local",
+		.start = U5500_MBOX1_LOCAL_START,
+		.end = U5500_MBOX1_LOCAL_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_irq",
+		.start = MBOX_PAIR1_VIRT_IRQ,
+		.end = MBOX_PAIR1_VIRT_IRQ,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource mbox2_resources[] = {
+	{
+		.name = "mbox_peer",
+		.start = U5500_MBOX2_PEER_START,
+		.end = U5500_MBOX2_PEER_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_local",
+		.start = U5500_MBOX2_LOCAL_START,
+		.end = U5500_MBOX2_LOCAL_END,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "mbox_irq",
+		.start = MBOX_PAIR2_VIRT_IRQ,
+		.end = MBOX_PAIR2_VIRT_IRQ,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device mbox0_device = {
+	.id = 0,
+	.name = "mbox",
+	.resource = mbox0_resources,
+	.num_resources = ARRAY_SIZE(mbox0_resources),
+};
+
+static struct platform_device mbox1_device = {
+	.id = 1,
+	.name = "mbox",
+	.resource = mbox1_resources,
+	.num_resources = ARRAY_SIZE(mbox1_resources),
+};
+
+static struct platform_device mbox2_device = {
+	.id = 2,
+	.name = "mbox",
+	.resource = mbox2_resources,
+	.num_resources = ARRAY_SIZE(mbox2_resources),
+};
+
 static struct platform_device *u5500_platform_devs[] __initdata = {
 	&u5500_gpio_devs[0],
 	&u5500_gpio_devs[1],
@@ -33,6 +118,9 @@ static struct platform_device *u5500_platform_devs[] __initdata = {
 	&u5500_gpio_devs[5],
 	&u5500_gpio_devs[6],
 	&u5500_gpio_devs[7],
+	&mbox0_device,
+	&mbox1_device,
+	&mbox2_device,
 };
 
 void __init u5500_map_io(void)
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index f21c444edd99..4acab7544b3c 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -38,10 +38,12 @@ static struct platform_device *platform_devs[] __initdata = {
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
+	__MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M),
 };
 
 static struct map_desc u8500ed_io_desc[] __initdata = {
@@ -53,6 +55,69 @@ static struct map_desc u8500v1_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
 };
 
+/*
+ * Functions to differentiate between later ASICs
+ * We look into the end of the ROM to locate the hardcoded ASIC ID.
+ * This is only needed to differentiate between minor revisions and
+ * process variants of an ASIC, the major revisions are encoded in
+ * the cpuid.
+ */
+#define U8500_ASIC_ID_LOC_ED_V1	(U8500_BOOT_ROM_BASE + 0x1FFF4)
+#define U8500_ASIC_ID_LOC_V2	(U8500_BOOT_ROM_BASE + 0x1DBF4)
+#define U8500_ASIC_REV_ED	0x01
+#define U8500_ASIC_REV_V10	0xA0
+#define U8500_ASIC_REV_V11	0xA1
+#define U8500_ASIC_REV_V20	0xB0
+
+/**
+ * struct db8500_asic_id - fields of the ASIC ID
+ * @process: the manufacturing process, 0x40 is 40 nm
+ *  0x00 is "standard"
+ * @partnumber: hithereto 0x8500 for DB8500
+ * @revision: version code in the series
+ * This field definion is not formally defined but makes
+ * sense.
+ */
+struct db8500_asic_id {
+	u8 process;
+	u16 partnumber;
+	u8 revision;
+};
+
+/* This isn't going to change at runtime */
+static struct db8500_asic_id db8500_id;
+
+static void __init get_db8500_asic_id(void)
+{
+	u32 asicid;
+
+	if (cpu_is_u8500v1() || cpu_is_u8500ed())
+		asicid = readl(__io_address(U8500_ASIC_ID_LOC_ED_V1));
+	else if (cpu_is_u8500v2())
+		asicid = readl(__io_address(U8500_ASIC_ID_LOC_V2));
+	else
+		BUG();
+
+	db8500_id.process = (asicid >> 24);
+	db8500_id.partnumber = (asicid >> 16) & 0xFFFFU;
+	db8500_id.revision = asicid & 0xFFU;
+}
+
+bool cpu_is_u8500v10(void)
+{
+	return (db8500_id.revision == U8500_ASIC_REV_V10);
+}
+
+bool cpu_is_u8500v11(void)
+{
+	return (db8500_id.revision == U8500_ASIC_REV_V11);
+}
+
+bool cpu_is_u8500v20(void)
+{
+	return (db8500_id.revision == U8500_ASIC_REV_V20);
+}
+
 void __init u8500_map_io(void)
 {
 	ux500_map_io();
@@ -63,6 +128,9 @@ void __init u8500_map_io(void)
 		iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc));
 	else
 		iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc));
+
+	/* Read out the ASIC ID as early as we can */
+	get_db8500_asic_id();
 }
 
 /*
@@ -70,6 +138,20 @@ void __init u8500_map_io(void)
  */
 void __init u8500_init_devices(void)
 {
+	/* Display some ASIC boilerplate */
+	pr_info("DB8500: process: %02x, revision ID: 0x%02x\n",
+		db8500_id.process, db8500_id.revision);
+	if (cpu_is_u8500ed())
+		pr_info("DB8500: Early Drop (ED)\n");
+	else if (cpu_is_u8500v10())
+		pr_info("DB8500: version 1.0\n");
+	else if (cpu_is_u8500v11())
+		pr_info("DB8500: version 1.1\n");
+	else if (cpu_is_u8500v20())
+		pr_info("DB8500: version 2.0\n");
+	else
+		pr_warning("ASIC: UNKNOWN SILICON VERSION!\n");
+
 	ux500_init_devices();
 
 	if (cpu_is_u8500ed())
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index e0fd747e447a..73fb1a551ec6 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -10,6 +10,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 
+#include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
@@ -71,6 +72,46 @@ void __init ux500_init_irq(void)
 }
 
 #ifdef CONFIG_CACHE_L2X0
+static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
+{
+	/* wait for the operation to complete */
+	while (readl(reg) & mask)
+		;
+}
+
+static inline void ux500_cache_sync(void)
+{
+	void __iomem *base = __io_address(UX500_L2CC_BASE);
+	writel(0, base + L2X0_CACHE_SYNC);
+	ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
+}
+
+/*
+ * The L2 cache cannot be turned off in the non-secure world.
+ * Dummy until a secure service is in place.
+ */
+static void ux500_l2x0_disable(void)
+{
+}
+
+/*
+ * This is only called when doing a kexec, just after turning off the L2
+ * and L1 cache, and it is surrounded by a spinlock in the generic version.
+ * However, we're not really turning off the L2 cache right now and the
+ * PL310 does not support exclusive accesses (used to implement the spinlock).
+ * So, the invalidation needs to be done without the spinlock.
+ */
+static void ux500_l2x0_inv_all(void)
+{
+	void __iomem *l2x0_base = __io_address(UX500_L2CC_BASE);
+	uint32_t l2x0_way_mask = (1<<16) - 1;	/* Bitmask of active ways */
+
+	/* invalidate all ways */
+	writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+	ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+	ux500_cache_sync();
+}
+
 static int ux500_l2x0_init(void)
 {
 	void __iomem *l2x0_base;
@@ -80,6 +121,10 @@ static int ux500_l2x0_init(void)
 	/* 64KB way size, 8 way associativity, force WA */
 	l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
 
+	/* Override invalidate function */
+	outer_cache.disable = ux500_l2x0_disable;
+	outer_cache.inv_all = ux500_l2x0_inv_all;
+
 	return 0;
 }
 early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 822903421943..4a94be3304b9 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -65,7 +65,7 @@ struct amba_device u8500_ssp0_device = {
 		.end   = U8500_SSP0_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
 	},
-	.irq = {IRQ_SSP0, NO_IRQ },
+	.irq = {IRQ_DB8500_SSP0, NO_IRQ },
 	/* ST-Ericsson modified id */
 	.periphid = SSP_PER_ID,
 };
@@ -77,8 +77,8 @@ static struct resource u8500_i2c0_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_I2C0,
-		.end	= IRQ_I2C0,
+		.start	= IRQ_DB8500_I2C0,
+		.end	= IRQ_DB8500_I2C0,
 		.flags	= IORESOURCE_IRQ,
 	}
 };
@@ -97,8 +97,8 @@ static struct resource u8500_i2c4_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_I2C4,
-		.end	= IRQ_I2C4,
+		.start	= IRQ_DB8500_I2C4,
+		.end	= IRQ_DB8500_I2C4,
 		.flags	= IORESOURCE_IRQ,
 	}
 };
@@ -110,91 +110,156 @@ struct platform_device u8500_i2c4_device = {
 	.num_resources	= ARRAY_SIZE(u8500_i2c4_resources),
 };
 
+/*
+ * SD/MMC
+ */
+
+struct amba_device u8500_sdi0_device = {
+	.dev		= {
+		.init_name = "sdi0",
+	},
+	.res		= {
+		.start	= U8500_SDI0_BASE,
+		.end	= U8500_SDI0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC0, NO_IRQ},
+};
+
+struct amba_device u8500_sdi1_device = {
+	.dev		= {
+		.init_name = "sdi1",
+	},
+	.res		= {
+		.start	= U8500_SDI1_BASE,
+		.end	= U8500_SDI1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC1, NO_IRQ},
+};
+
+struct amba_device u8500_sdi2_device = {
+	.dev		= {
+		.init_name = "sdi2",
+	},
+	.res		= {
+		.start	= U8500_SDI2_BASE,
+		.end	= U8500_SDI2_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC2, NO_IRQ},
+};
+
+struct amba_device u8500_sdi3_device = {
+	.dev		= {
+		.init_name = "sdi3",
+	},
+	.res		= {
+		.start	= U8500_SDI3_BASE,
+		.end	= U8500_SDI3_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC3, NO_IRQ},
+};
+
+struct amba_device u8500_sdi4_device = {
+	.dev		= {
+		.init_name = "sdi4",
+	},
+	.res		= {
+		.start	= U8500_SDI4_BASE,
+		.end	= U8500_SDI4_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC4, NO_IRQ},
+};
+
+struct amba_device u8500_sdi5_device = {
+	.dev		= {
+		.init_name = "sdi5",
+	},
+	.res		= {
+		.start	= U8500_SDI5_BASE,
+		.end	= U8500_SDI5_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= {IRQ_DB8500_SDMMC5, NO_IRQ},
+};
+
 static struct resource dma40_resources[] = {
 	[0] = {
 		.start = U8500_DMA_BASE,
-		.end = U8500_DMA_BASE + SZ_4K - 1,
+		.end   = U8500_DMA_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-		.name = "base",
+		.name  = "base",
 	},
 	[1] = {
 		.start = U8500_DMA_LCPA_BASE,
-		.end = U8500_DMA_LCPA_BASE + SZ_4K - 1,
+		.end   = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
 		.flags = IORESOURCE_MEM,
-		.name = "lcpa",
+		.name  = "lcpa",
 	},
 	[2] = {
-		.start = U8500_DMA_LCLA_BASE,
-		.end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1,
-		.flags = IORESOURCE_MEM,
-		.name = "lcla",
-	},
-	[3] = {
-		.start = IRQ_DMA,
-		.end = IRQ_DMA,
-		.flags = IORESOURCE_IRQ}
+		.start = IRQ_DB8500_DMA,
+		.end   = IRQ_DB8500_DMA,
+		.flags = IORESOURCE_IRQ,
+	}
 };
 
 /* Default configuration for physcial memcpy */
 struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
-	.channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE |
-			 STEDMA40_LOW_PRIORITY_CHANNEL |
-			 STEDMA40_PCHAN_BASIC_MODE),
+	.mode = STEDMA40_MODE_PHYSICAL,
 	.dir = STEDMA40_MEM_TO_MEM,
 
-	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.src_info.data_width = STEDMA40_BYTE_WIDTH,
 	.src_info.psize = STEDMA40_PSIZE_PHY_1,
+	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 
-	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
 	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
-
+	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 };
 /* Default configuration for logical memcpy */
 struct stedma40_chan_cfg dma40_memcpy_conf_log = {
-	.channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE |
-			 STEDMA40_LOW_PRIORITY_CHANNEL |
-			 STEDMA40_LCHAN_SRC_LOG_DST_LOG |
-			 STEDMA40_NO_TIM_FOR_LINK),
 	.dir = STEDMA40_MEM_TO_MEM,
 
-	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.src_info.data_width = STEDMA40_BYTE_WIDTH,
 	.src_info.psize = STEDMA40_PSIZE_LOG_1,
+	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 
-	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
 	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-
+	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 };
 
 /*
  * Mapping between destination event lines and physical device address.
  * The event line is tied to a device and therefor the address is constant.
  */
-static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV];
+static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV];
 
 /* Mapping between source event lines and physical device address */
-static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV];
+static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV];
 
 /* Reserved event lines for memcpy only */
 static int dma40_memcpy_event[] = {
-	STEDMA40_MEMCPY_TX_1,
-	STEDMA40_MEMCPY_TX_2,
-	STEDMA40_MEMCPY_TX_3,
-	STEDMA40_MEMCPY_TX_4,
+	DB8500_DMA_MEMCPY_TX_0,
+	DB8500_DMA_MEMCPY_TX_1,
+	DB8500_DMA_MEMCPY_TX_2,
+	DB8500_DMA_MEMCPY_TX_3,
+	DB8500_DMA_MEMCPY_TX_4,
+	DB8500_DMA_MEMCPY_TX_5,
 };
 
 static struct stedma40_platform_data dma40_plat_data = {
-	.dev_len = STEDMA40_NR_DEV,
+	.dev_len = DB8500_DMA_NR_DEV,
 	.dev_rx = dma40_rx_map,
 	.dev_tx = dma40_tx_map,
 	.memcpy = dma40_memcpy_event,
 	.memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
 	.memcpy_conf_phy = &dma40_memcpy_conf_phy,
 	.memcpy_conf_log = &dma40_memcpy_conf_log,
-	.llis_per_log = 8,
+	.disabled_channels = {-1},
 };
 
 struct platform_device u8500_dma40_device = {
@@ -213,4 +278,26 @@ void dma40_u8500ed_fixup(void)
 	dma40_plat_data.memcpy_len = 0;
 	dma40_resources[0].start = U8500_DMA_BASE_ED;
 	dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1;
+	dma40_resources[1].start = U8500_DMA_LCPA_BASE_ED;
+	dma40_resources[1].end = U8500_DMA_LCPA_BASE_ED + 2 * SZ_1K - 1;
 }
+
+struct resource keypad_resources[] = {
+	[0] = {
+		.start = U8500_SKE_BASE,
+		.end = U8500_SKE_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_DB8500_KB,
+		.end = IRQ_DB8500_KB,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device ux500_ske_keypad_device = {
+	.name = "nmk-ske-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(keypad_resources),
+	.resource = keypad_resources,
+};
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
new file mode 100644
index 000000000000..b782a03024be
--- /dev/null
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *	Based on ARM realview platform
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+#include <asm/cacheflush.h>
+
+extern volatile int pen_release;
+
+static DECLARE_COMPLETION(cpu_killed);
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+	flush_cache_all();
+
+	/* we put the platform to just WFI */
+	for (;;) {
+		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
+				: : : "memory");
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+#ifdef DEBUG
+	unsigned int this_cpu = hard_smp_processor_id();
+
+	if (cpu != this_cpu) {
+		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
+			   this_cpu, cpu);
+		BUG();
+	}
+#endif
+
+	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+	complete(&cpu_killed);
+
+	/* directly enter low power state, skipping secure registers */
+	platform_do_lowpower(cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index 545c80fc8024..3eafc0e24ba5 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -100,4 +100,18 @@
 #define U5500_GPIOBANK6_BASE	(U5500_GPIO4_BASE + 0x80)
 #define U5500_GPIOBANK7_BASE	(U5500_GPIO4_BASE + 0x100)
 
+#define U5500_MBOX_BASE		(U5500_MODEM_BASE + 0xFFD1000)
+#define U5500_MBOX0_PEER_START	(U5500_MBOX_BASE + 0x40)
+#define U5500_MBOX0_PEER_END	(U5500_MBOX_BASE + 0x5F)
+#define U5500_MBOX0_LOCAL_START	(U5500_MBOX_BASE + 0x60)
+#define U5500_MBOX0_LOCAL_END	(U5500_MBOX_BASE + 0x7F)
+#define U5500_MBOX1_PEER_START	(U5500_MBOX_BASE + 0x80)
+#define U5500_MBOX1_PEER_END	(U5500_MBOX_BASE + 0x9F)
+#define U5500_MBOX1_LOCAL_START	(U5500_MBOX_BASE + 0xA0)
+#define U5500_MBOX1_LOCAL_END	(U5500_MBOX_BASE + 0xBF)
+#define U5500_MBOX2_PEER_START	(U5500_MBOX_BASE + 0x00)
+#define U5500_MBOX2_PEER_END	(U5500_MBOX_BASE + 0x1F)
+#define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)
+#define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 85fc6a80b386..f07d0986409d 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -15,9 +15,9 @@
 #define U8500_ESRAM_BANK2	(U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
 #define U8500_ESRAM_BANK3	(U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
 #define U8500_ESRAM_BANK4	(U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
-/* Use bank 4 for DMA LCLA and LCPA */
-#define U8500_DMA_LCLA_BASE	U8500_ESRAM_BANK4
-#define U8500_DMA_LCPA_BASE	(U8500_ESRAM_BANK4 + 0x4000)
+/* Use bank 4 for DMA LCPA */
+#define U8500_DMA_LCPA_BASE	U8500_ESRAM_BANK4
+#define U8500_DMA_LCPA_BASE_ED	(U8500_ESRAM_BANK4 + 0x4000)
 
 #define U8500_PER3_BASE		0x80000000
 #define U8500_STM_BASE		0x80100000
@@ -30,8 +30,6 @@
 #define U8500_ICN_BASE		0x81000000
 
 #define U8500_BOOT_ROM_BASE	0x90000000
-/* ASIC ID is at 0xff4 offset within this region */
-#define U8500_ASIC_ID_BASE	0x9001F000
 
 #define U8500_PER6_BASE		0xa03c0000
 #define U8500_PER5_BASE		0xa03e0000
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index c5203b7ea552..be7c0f14e310 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -18,11 +18,9 @@
 #define UX500_UART(n)	__UX500_UART(n)
 #define UART_BASE	UX500_UART(CONFIG_UX500_DEBUG_UART)
 
-	.macro	addruart, rx, tmp
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =UART_BASE				@ no, physical address
-	ldrne	\rx, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
+	.macro	addruart, rp, rv
+	ldr	\rp, =UART_BASE				@ no, physical address
+	ldr	\rv, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
 	.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index c2b2f2574947..b91a4d1211a2 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -26,6 +26,14 @@ extern struct platform_device ux500_i2c3_device;
 extern struct platform_device u8500_i2c0_device;
 extern struct platform_device u8500_i2c4_device;
 extern struct platform_device u8500_dma40_device;
+extern struct platform_device ux500_ske_keypad_device;
+
+extern struct amba_device u8500_sdi0_device;
+extern struct amba_device u8500_sdi1_device;
+extern struct amba_device u8500_sdi2_device;
+extern struct amba_device u8500_sdi3_device;
+extern struct amba_device u8500_sdi4_device;
+extern struct amba_device u8500_sdi5_device;
 
 void dma40_u8500ed_fixup(void);
 
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 8656379a8309..32e883a8f2a2 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -104,16 +104,35 @@ static inline bool cpu_is_u8500(void)
 #endif
 }
 
+#define CPUID_DB8500ED	0x410fc090
+#define CPUID_DB8500V1	0x411fc091
+#define CPUID_DB8500V2	0x412fc091
+
 static inline bool cpu_is_u8500ed(void)
 {
-	return cpu_is_u8500() && (read_cpuid_id() & 15) == 0;
+	return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500ED);
 }
 
 static inline bool cpu_is_u8500v1(void)
 {
-	return cpu_is_u8500() && (read_cpuid_id() & 15) == 1;
+	return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V1);
+}
+
+static inline bool cpu_is_u8500v2(void)
+{
+	return cpu_is_u8500() && (read_cpuid_id() == CPUID_DB8500V2);
 }
 
+#ifdef CONFIG_UX500_SOC_DB8500
+bool cpu_is_u8500v10(void);
+bool cpu_is_u8500v11(void);
+bool cpu_is_u8500v20(void);
+#else
+static inline bool cpu_is_u8500v10(void) { return false; }
+static inline bool cpu_is_u8500v11(void) { return false; }
+static inline bool cpu_is_u8500v20(void) { return false; }
+#endif
+
 static inline bool cpu_is_u5500(void)
 {
 #ifdef CONFIG_UX500_SOC_DB5500
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
new file mode 100644
index 000000000000..cca4f705601e
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_BOARD_MOP500_H
+#define __MACH_IRQS_BOARD_MOP500_H
+
+#define AB8500_NR_IRQS			104
+
+#define MOP500_AB8500_IRQ_BASE		IRQ_BOARD_START
+#define MOP500_AB8500_IRQ_END		(MOP500_AB8500_IRQ_BASE \
+					 + AB8500_NR_IRQS)
+#define MOP500_IRQ_END			MOP500_AB8500_IRQ_END
+
+#if MOP500_IRQ_END > IRQ_BOARD_END
+#undef IRQ_BOARD_END
+#define IRQ_BOARD_END	MOP500_IRQ_END
+#endif
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
new file mode 100644
index 000000000000..bfa123dbec3b
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_DB5500_H
+#define __MACH_IRQS_DB5500_H
+
+#define IRQ_DB5500_MTU0			(IRQ_SHPI_START + 4)
+#define IRQ_DB5500_SPI2			(IRQ_SHPI_START + 6)
+#define IRQ_DB5500_PMU0			(IRQ_SHPI_START + 7)
+#define IRQ_DB5500_SPI0			(IRQ_SHPI_START + 8)
+#define IRQ_DB5500_RTT			(IRQ_SHPI_START + 9)
+#define IRQ_DB5500_PKA			(IRQ_SHPI_START + 10)
+#define IRQ_DB5500_UART0		(IRQ_SHPI_START + 11)
+#define IRQ_DB5500_I2C3			(IRQ_SHPI_START + 12)
+#define IRQ_DB5500_L2CC			(IRQ_SHPI_START + 13)
+#define IRQ_DB5500_MSP0			(IRQ_SHPI_START + 14)
+#define IRQ_DB5500_CRYP1		(IRQ_SHPI_START + 15)
+#define IRQ_DB5500_PMU1			(IRQ_SHPI_START + 16)
+#define IRQ_DB5500_MTU1			(IRQ_SHPI_START + 17)
+#define IRQ_DB5500_RTC			(IRQ_SHPI_START + 18)
+#define IRQ_DB5500_UART1		(IRQ_SHPI_START + 19)
+#define IRQ_DB5500_USB_WAKEUP		(IRQ_SHPI_START + 20)
+#define IRQ_DB5500_I2C0			(IRQ_SHPI_START + 21)
+#define IRQ_DB5500_I2C1			(IRQ_SHPI_START + 22)
+#define IRQ_DB5500_USBOTG		(IRQ_SHPI_START + 23)
+#define IRQ_DB5500_DMA_SECURE		(IRQ_SHPI_START + 24)
+#define IRQ_DB5500_DMA			(IRQ_SHPI_START + 25)
+#define IRQ_DB5500_UART2		(IRQ_SHPI_START + 26)
+#define IRQ_DB5500_ICN_PMU1		(IRQ_SHPI_START + 27)
+#define IRQ_DB5500_ICN_PMU2		(IRQ_SHPI_START + 28)
+#define IRQ_DB5500_UART3		(IRQ_SHPI_START + 29)
+#define IRQ_DB5500_SPI3			(IRQ_SHPI_START + 30)
+#define IRQ_DB5500_SDMMC4		(IRQ_SHPI_START + 31)
+#define IRQ_DB5500_IRRC			(IRQ_SHPI_START + 33)
+#define IRQ_DB5500_IRDA_FT		(IRQ_SHPI_START + 34)
+#define IRQ_DB5500_IRDA_SD		(IRQ_SHPI_START + 35)
+#define IRQ_DB5500_IRDA_FI		(IRQ_SHPI_START + 36)
+#define IRQ_DB5500_IRDA_FD		(IRQ_SHPI_START + 37)
+#define IRQ_DB5500_FSMC_CODEREADY	(IRQ_SHPI_START + 38)
+#define IRQ_DB5500_FSMC_NANDWAIT	(IRQ_SHPI_START + 39)
+#define IRQ_DB5500_AB5500		(IRQ_SHPI_START + 40)
+#define IRQ_DB5500_SDMMC2		(IRQ_SHPI_START + 41)
+#define IRQ_DB5500_SIA			(IRQ_SHPI_START + 42)
+#define IRQ_DB5500_SIA2			(IRQ_SHPI_START + 43)
+#define IRQ_DB5500_HVA			(IRQ_SHPI_START + 44)
+#define IRQ_DB5500_HVA2			(IRQ_SHPI_START + 45)
+#define IRQ_DB5500_PRCMU0		(IRQ_SHPI_START + 46)
+#define IRQ_DB5500_PRCMU1		(IRQ_SHPI_START + 47)
+#define IRQ_DB5500_DISP			(IRQ_SHPI_START + 48)
+#define IRQ_DB5500_SDMMC1		(IRQ_SHPI_START + 50)
+#define IRQ_DB5500_MSP1			(IRQ_SHPI_START + 52)
+#define IRQ_DB5500_KBD			(IRQ_SHPI_START + 53)
+#define IRQ_DB5500_I2C2			(IRQ_SHPI_START + 55)
+#define IRQ_DB5500_B2R2			(IRQ_SHPI_START + 56)
+#define IRQ_DB5500_CRYP0		(IRQ_SHPI_START + 57)
+#define IRQ_DB5500_SDMMC3		(IRQ_SHPI_START + 59)
+#define IRQ_DB5500_SDMMC0		(IRQ_SHPI_START + 60)
+#define IRQ_DB5500_HSEM			(IRQ_SHPI_START + 61)
+#define IRQ_DB5500_SBAG			(IRQ_SHPI_START + 63)
+#define IRQ_DB5500_MODEM		(IRQ_SHPI_START + 65)
+#define IRQ_DB5500_SPI1			(IRQ_SHPI_START + 96)
+#define IRQ_DB5500_MSP2			(IRQ_SHPI_START + 98)
+#define IRQ_DB5500_SRPTIMER		(IRQ_SHPI_START + 101)
+#define IRQ_DB5500_CTI0			(IRQ_SHPI_START + 108)
+#define IRQ_DB5500_CTI1			(IRQ_SHPI_START + 109)
+#define IRQ_DB5500_ICN_ERR		(IRQ_SHPI_START + 110)
+#define IRQ_DB5500_MALI_PPMMU		(IRQ_SHPI_START + 112)
+#define IRQ_DB5500_MALI_PP		(IRQ_SHPI_START + 113)
+#define IRQ_DB5500_MALI_GPMMU		(IRQ_SHPI_START + 114)
+#define IRQ_DB5500_MALI_GP		(IRQ_SHPI_START + 115)
+#define IRQ_DB5500_MALI			(IRQ_SHPI_START + 116)
+#define IRQ_DB5500_PRCMU_SEM		(IRQ_SHPI_START + 118)
+#define IRQ_DB5500_GPIO0		(IRQ_SHPI_START + 119)
+#define IRQ_DB5500_GPIO1		(IRQ_SHPI_START + 120)
+#define IRQ_DB5500_GPIO2		(IRQ_SHPI_START + 121)
+#define IRQ_DB5500_GPIO3		(IRQ_SHPI_START + 122)
+#define IRQ_DB5500_GPIO4		(IRQ_SHPI_START + 123)
+#define IRQ_DB5500_GPIO5		(IRQ_SHPI_START + 124)
+#define IRQ_DB5500_GPIO6		(IRQ_SHPI_START + 125)
+#define IRQ_DB5500_GPIO7		(IRQ_SHPI_START + 126)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
new file mode 100644
index 000000000000..8b5d9f0a1633
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_DB8500_H
+#define __MACH_IRQS_DB8500_H
+
+#define IRQ_DB8500_MTU0			(IRQ_SHPI_START + 4)
+#define IRQ_DB8500_SPI2			(IRQ_SHPI_START + 6)
+#define IRQ_DB8500_PMU			(IRQ_SHPI_START + 7)
+#define IRQ_DB8500_SPI0			(IRQ_SHPI_START + 8)
+#define IRQ_DB8500_RTT			(IRQ_SHPI_START + 9)
+#define IRQ_DB8500_PKA			(IRQ_SHPI_START + 10)
+#define IRQ_DB8500_UART0		(IRQ_SHPI_START + 11)
+#define IRQ_DB8500_I2C3			(IRQ_SHPI_START + 12)
+#define IRQ_DB8500_L2CC			(IRQ_SHPI_START + 13)
+#define IRQ_DB8500_SSP0			(IRQ_SHPI_START + 14)
+#define IRQ_DB8500_CRYP1		(IRQ_SHPI_START + 15)
+#define IRQ_DB8500_MSP1_RX		(IRQ_SHPI_START + 16)
+#define IRQ_DB8500_MTU1			(IRQ_SHPI_START + 17)
+#define IRQ_DB8500_RTC			(IRQ_SHPI_START + 18)
+#define IRQ_DB8500_UART1		(IRQ_SHPI_START + 19)
+#define IRQ_DB8500_USB_WAKEUP		(IRQ_SHPI_START + 20)
+#define IRQ_DB8500_I2C0			(IRQ_SHPI_START + 21)
+#define IRQ_DB8500_I2C1			(IRQ_SHPI_START + 22)
+#define IRQ_DB8500_USBOTG		(IRQ_SHPI_START + 23)
+#define IRQ_DB8500_DMA_SECURE		(IRQ_SHPI_START + 24)
+#define IRQ_DB8500_DMA			(IRQ_SHPI_START + 25)
+#define IRQ_DB8500_UART2		(IRQ_SHPI_START + 26)
+#define IRQ_DB8500_ICN_PMU1		(IRQ_SHPI_START + 27)
+#define IRQ_DB8500_ICN_PMU2		(IRQ_SHPI_START + 28)
+#define IRQ_DB8500_HSIR_EXCEP		(IRQ_SHPI_START + 29)
+#define IRQ_DB8500_MSP0			(IRQ_SHPI_START + 31)
+#define IRQ_DB8500_HSIR_CH0_OVRRUN	(IRQ_SHPI_START + 32)
+#define IRQ_DB8500_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
+#define IRQ_DB8500_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
+#define IRQ_DB8500_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
+#define IRQ_DB8500_HSIR_CH4_OVRRUN	(IRQ_SHPI_START + 36)
+#define IRQ_DB8500_HSIR_CH5_OVRRUN	(IRQ_SHPI_START + 37)
+#define IRQ_DB8500_HSIR_CH6_OVRRUN	(IRQ_SHPI_START + 38)
+#define IRQ_DB8500_HSIR_CH7_OVRRUN	(IRQ_SHPI_START + 39)
+#define IRQ_DB8500_AB8500		(IRQ_SHPI_START + 40)
+#define IRQ_DB8500_SDMMC2		(IRQ_SHPI_START + 41)
+#define IRQ_DB8500_SIA			(IRQ_SHPI_START + 42)
+#define IRQ_DB8500_SIA2			(IRQ_SHPI_START + 43)
+#define IRQ_DB8500_SVA			(IRQ_SHPI_START + 44)
+#define IRQ_DB8500_SVA2			(IRQ_SHPI_START + 45)
+#define IRQ_DB8500_PRCMU0		(IRQ_SHPI_START + 46)
+#define IRQ_DB8500_PRCMU1		(IRQ_SHPI_START + 47)
+#define IRQ_DB8500_DISP			(IRQ_SHPI_START + 48)
+#define IRQ_DB8500_SPI3			(IRQ_SHPI_START + 49)
+#define IRQ_DB8500_SDMMC1		(IRQ_SHPI_START + 50)
+#define IRQ_DB8500_I2C4			(IRQ_SHPI_START + 51)
+#define IRQ_DB8500_SSP1			(IRQ_SHPI_START + 52)
+#define IRQ_DB8500_SKE			(IRQ_SHPI_START + 53)
+#define IRQ_DB8500_KB			(IRQ_SHPI_START + 54)
+#define IRQ_DB8500_I2C2			(IRQ_SHPI_START + 55)
+#define IRQ_DB8500_B2R2			(IRQ_SHPI_START + 56)
+#define IRQ_DB8500_CRYP0		(IRQ_SHPI_START + 57)
+#define IRQ_DB8500_SDMMC3		(IRQ_SHPI_START + 59)
+#define IRQ_DB8500_SDMMC0		(IRQ_SHPI_START + 60)
+#define IRQ_DB8500_HSEM			(IRQ_SHPI_START + 61)
+#define IRQ_DB8500_MSP1			(IRQ_SHPI_START + 62)
+#define IRQ_DB8500_SBAG			(IRQ_SHPI_START + 63)
+#define IRQ_DB8500_SPI1			(IRQ_SHPI_START + 96)
+#define IRQ_DB8500_SRPTIMER		(IRQ_SHPI_START + 97)
+#define IRQ_DB8500_MSP2			(IRQ_SHPI_START + 98)
+#define IRQ_DB8500_SDMMC4		(IRQ_SHPI_START + 99)
+#define IRQ_DB8500_SDMMC5		(IRQ_SHPI_START + 100)
+#define IRQ_DB8500_HSIRD0		(IRQ_SHPI_START + 104)
+#define IRQ_DB8500_HSIRD1		(IRQ_SHPI_START + 105)
+#define IRQ_DB8500_HSITD0		(IRQ_SHPI_START + 106)
+#define IRQ_DB8500_HSITD1		(IRQ_SHPI_START + 107)
+#define IRQ_DB8500_CTI0			(IRQ_SHPI_START + 108)
+#define IRQ_DB8500_CTI1			(IRQ_SHPI_START + 109)
+#define IRQ_DB8500_ICN_ERR		(IRQ_SHPI_START + 110)
+#define IRQ_DB8500_MALI_PPMMU		(IRQ_SHPI_START + 112)
+#define IRQ_DB8500_MALI_PP		(IRQ_SHPI_START + 113)
+#define IRQ_DB8500_MALI_GPMMU		(IRQ_SHPI_START + 114)
+#define IRQ_DB8500_MALI_GP		(IRQ_SHPI_START + 115)
+#define IRQ_DB8500_MALI			(IRQ_SHPI_START + 116)
+#define IRQ_DB8500_PRCMU_SEM		(IRQ_SHPI_START + 118)
+#define IRQ_DB8500_GPIO0		(IRQ_SHPI_START + 119)
+#define IRQ_DB8500_GPIO1		(IRQ_SHPI_START + 120)
+#define IRQ_DB8500_GPIO2		(IRQ_SHPI_START + 121)
+#define IRQ_DB8500_GPIO3		(IRQ_SHPI_START + 122)
+#define IRQ_DB8500_GPIO4		(IRQ_SHPI_START + 123)
+#define IRQ_DB8500_GPIO5		(IRQ_SHPI_START + 124)
+#define IRQ_DB8500_GPIO6		(IRQ_SHPI_START + 125)
+#define IRQ_DB8500_GPIO7		(IRQ_SHPI_START + 126)
+#define IRQ_DB8500_GPIO8		(IRQ_SHPI_START + 127)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 7970684b1d09..693aa57de88d 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -10,7 +10,8 @@
 #ifndef ASM_ARCH_IRQS_H
 #define ASM_ARCH_IRQS_H
 
-#include <mach/hardware.h>
+#include <mach/irqs-db5500.h>
+#include <mach/irqs-db8500.h>
 
 #define IRQ_LOCALTIMER                  29
 #define IRQ_LOCALWDOG                   30
@@ -39,7 +40,8 @@
 #define IRQ_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
 #define IRQ_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
 #define IRQ_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
-#define IRQ_AB4500		(IRQ_SHPI_START + 40)
+#define IRQ_AB8500		(IRQ_SHPI_START + 40)
+#define IRQ_PRCMU               (IRQ_SHPI_START + 47)
 #define IRQ_DISP		(IRQ_SHPI_START + 48)
 #define IRQ_SiPI3		(IRQ_SHPI_START + 49)
 #define IRQ_I2C4		(IRQ_SHPI_START + 51)
@@ -67,12 +69,34 @@
 /* There are 128 shared peripheral interrupts assigned to
  * INTID[160:32]. The first 32 interrupts are reserved.
  */
-#define U8500_SOC_NR_IRQS		161
+#define DBX500_NR_INTERNAL_IRQS		161
 
 /* After chip-specific IRQ numbers we have the GPIO ones */
 #define NOMADIK_NR_GPIO			288
-#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + U8500_SOC_NR_IRQS)
-#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - U8500_SOC_NR_IRQS)
-#define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + DBX500_NR_INTERNAL_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - DBX500_NR_INTERNAL_IRQS)
+#define IRQ_BOARD_START			NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
 
-#endif /*ASM_ARCH_IRQS_H*/
+/* This will be overridden by board-specific irq headers */
+#define IRQ_BOARD_END			IRQ_BOARD_START
+
+#ifdef CONFIG_MACH_U8500_MOP
+#include <mach/irqs-board-mop500.h>
+#endif
+
+/*
+ * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual
+ * IRQ:s representing modem IRQ:s can be allocated
+ */
+#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1)
+#define IRQ_MODEM_EVENTS_NBR 72
+#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
+
+/* List of virtual IRQ:s that are allocated from the range above */
+#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43)
+#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45)
+#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41)
+
+#define NR_IRQS				IRQ_MODEM_EVENTS_END
+
+#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/mbox.h b/arch/arm/mach-ux500/include/mach/mbox.h
new file mode 100644
index 000000000000..7f9da4d2fbda
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/mbox.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __INC_STE_MBOX_H
+#define __INC_STE_MBOX_H
+
+#define MBOX_BUF_SIZE 16
+#define MBOX_NAME_SIZE 8
+
+/**
+  * mbox_recv_cb_t - Definition of the mailbox callback.
+  * @mbox_msg:	The mailbox message.
+  * @priv:	The clients private data as specified in the call to mbox_setup.
+  *
+  * This function will be called upon reception of new mailbox messages.
+  */
+typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv);
+
+/**
+  * struct mbox - Mailbox instance struct
+  * @list:		Linked list head.
+  * @pdev:		Pointer to device struct.
+  * @cb:		Callback function. Will be called
+  *			when new data is received.
+  * @client_data:	Clients private data. Will be sent back
+  *			in the callback function.
+  * @virtbase_peer:	Virtual address for outgoing mailbox.
+  * @virtbase_local:	Virtual address for incoming mailbox.
+  * @buffer:		Then internal queue for outgoing messages.
+  * @name:		Name of this mailbox.
+  * @buffer_available:	Completion variable to achieve "blocking send".
+  *			This variable will be signaled when there is
+  *			internal buffer space available.
+  * @client_blocked:	To keep track if any client is currently
+  *			blocked.
+  * @lock:		Spinlock to protect this mailbox instance.
+  * @write_index:	Index in internal buffer to write to.
+  * @read_index:	Index in internal buffer to read from.
+  * @allocated:		Indicates whether this particular mailbox
+  *			id has been allocated by someone.
+  */
+struct mbox {
+	struct list_head list;
+	struct platform_device *pdev;
+	mbox_recv_cb_t *cb;
+	void *client_data;
+	void __iomem *virtbase_peer;
+	void __iomem *virtbase_local;
+	u32 buffer[MBOX_BUF_SIZE];
+	char name[MBOX_NAME_SIZE];
+	struct completion buffer_available;
+	u8 client_blocked;
+	spinlock_t lock;
+	u8 write_index;
+	u8 read_index;
+	bool allocated;
+};
+
+/**
+  * mbox_setup - Set up a mailbox and return its instance.
+  * @mbox_id:	The ID number of the mailbox. 0 or 1 for modem CPU,
+  *		2 for modem DSP.
+  * @mbox_cb:	Pointer to the callback function to be called when a new message
+  *		is received.
+  * @priv:	Client user data which will be returned in the callback.
+  *
+  * Returns a mailbox instance to be specified in subsequent calls to mbox_send.
+  */
+struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv);
+
+/**
+  * mbox_send - Send a mailbox message.
+  * @mbox:	Mailbox instance (returned by mbox_setup)
+  * @mbox_msg:	The mailbox message to send.
+  * @block:	Specifies whether this call will block until send is possible,
+  *		or return an error if the mailbox buffer is full.
+  *
+  * Returns 0 on success or a negative error code on error. -ENOMEM indicates
+  * that the internal buffer is full and you have to try again later (or
+  * specify "block" in order to block until send is possible).
+  */
+int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block);
+
+#endif /*INC_STE_MBOX_H*/
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
new file mode 100644
index 000000000000..8885f39a6421
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2009 ST-Ericsson SA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+#ifndef __MACH_PRCMU_REGS_H
+#define __MACH_PRCMU_REGS_H
+
+#include <mach/hardware.h>
+
+#define _PRCMU_BASE		IO_ADDRESS(U8500_PRCMU_BASE)
+
+#define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
+#define PRCM_ARM_CHGCLKREQ	(_PRCMU_BASE + 0x114)
+#define PRCM_PLLARM_ENABLE	(_PRCMU_BASE + 0x98)
+#define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
+#define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
+#define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
+#define PRCM_ARM_LS_CLAMP	(_PRCMU_BASE + 0x30c)
+#define PRCM_SRAM_A9		(_PRCMU_BASE + 0x308)
+
+/* ARM WFI Standby signal register */
+#define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
+#define PRCMU_IOCR              (_PRCMU_BASE + 0x310)
+
+/* CPU mailbox registers */
+#define PRCM_MBOX_CPU_VAL	(_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET	(_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR	(_PRCMU_BASE + 0x104)
+
+/* Dual A9 core interrupt management unit registers */
+#define PRCM_A9_MASK_REQ	(_PRCMU_BASE + 0x328)
+#define PRCM_A9_MASK_ACK	(_PRCMU_BASE + 0x32c)
+#define PRCM_ARMITMSK31TO0	(_PRCMU_BASE + 0x11c)
+#define PRCM_ARMITMSK63TO32	(_PRCMU_BASE + 0x120)
+#define PRCM_ARMITMSK95TO64	(_PRCMU_BASE + 0x124)
+#define PRCM_ARMITMSK127TO96	(_PRCMU_BASE + 0x128)
+#define PRCM_POWER_STATE_VAL	(_PRCMU_BASE + 0x25C)
+#define PRCM_ARMITVAL31TO0	(_PRCMU_BASE + 0x260)
+#define PRCM_ARMITVAL63TO32	(_PRCMU_BASE + 0x264)
+#define PRCM_ARMITVAL95TO64	(_PRCMU_BASE + 0x268)
+#define PRCM_ARMITVAL127TO96	(_PRCMU_BASE + 0x26C)
+
+#define PRCM_HOSTACCESS_REQ	(_PRCMU_BASE + 0x334)
+#define ARM_WAKEUP_MODEM	0x1
+
+#define PRCM_ARM_IT1_CLEAR	(_PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_VAL	(_PRCMU_BASE + 0x494)
+#define PRCM_HOLD_EVT		(_PRCMU_BASE + 0x174)
+
+#define PRCM_ITSTATUS0		(_PRCMU_BASE + 0x148)
+#define PRCM_ITSTATUS1		(_PRCMU_BASE + 0x150)
+#define PRCM_ITSTATUS2		(_PRCMU_BASE + 0x158)
+#define PRCM_ITSTATUS3		(_PRCMU_BASE + 0x160)
+#define PRCM_ITSTATUS4		(_PRCMU_BASE + 0x168)
+#define PRCM_ITSTATUS5		(_PRCMU_BASE + 0x484)
+#define PRCM_ITCLEAR5		(_PRCMU_BASE + 0x488)
+#define PRCM_ARMIT_MASKXP70_IT	(_PRCMU_BASE + 0x1018)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST	(_PRCMU_BASE + 0x228)
+
+/* Level shifter and clamp control registers */
+#define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
+#define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
+
+/* PRCMU clock/PLL/reset registers */
+#define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
+#define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
+#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + 0x044)
+#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + 0x064)
+#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + 0x058)
+#define PRCM_TVCLK_MGT             (_PRCMU_BASE + 0x07c)
+#define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
+#define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
+#define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
+#define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
+
+/* ePOD and memory power signal control registers */
+#define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
+#define PRCM_SRAM_LS_SLEEP         (_PRCMU_BASE + 0x304)
+
+/* Debug power control unit registers */
+#define PRCM_POWER_STATE_SET       (_PRCMU_BASE + 0x254)
+
+/* Miscellaneous unit registers */
+#define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
+
+#endif /* __MACH_PRCMU__REGS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h
new file mode 100644
index 000000000000..549843ff6dbe
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/prcmu.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCMU f/w APIs
+ */
+#ifndef __MACH_PRCMU_H
+#define __MACH_PRCMU_H
+
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+#endif /* __MACH_PRCMU_H */
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index e978dbd9e210..54bbe648bf58 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -38,4 +38,11 @@ extern struct sys_timer ux500_timer;
 	.type		= MT_DEVICE,		\
 }
 
+#define __MEM_DEV_DESC(x, sz)	{		\
+	.virtual	= IO_ADDRESS(x),	\
+	.pfn		= __phys_to_pfn(x),	\
+	.length		= sz,			\
+	.type		= MT_MEMORY,		\
+}
+
 #endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
index b59f7bc9725d..197e8417375e 100644
--- a/arch/arm/mach-ux500/include/mach/smp.h
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -10,18 +10,11 @@
 #define ASMARM_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
+#include <asm/smp_mpidr.h>
 
 /* This is required to wakeup the secondary core */
 extern void u8500_secondary_startup(void);
 
-#define hard_smp_processor_id()				\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x0F;				\
-	})
-
 /*
  * We use IRQ1 as the IPI
  */
diff --git a/arch/arm/mach-ux500/mbox.c b/arch/arm/mach-ux500/mbox.c
new file mode 100644
index 000000000000..63435389c544
--- /dev/null
+++ b/arch/arm/mach-ux500/mbox.c
@@ -0,0 +1,567 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+/*
+ * Mailbox nomenclature:
+ *
+ *       APE           MODEM
+ *           mbox pairX
+ *   ..........................
+ *   .                       .
+ *   .           peer        .
+ *   .     send  ----        .
+ *   .      -->  |  |        .
+ *   .           |  |        .
+ *   .           ----        .
+ *   .                       .
+ *   .           local       .
+ *   .     rec   ----        .
+ *   .           |  | <--    .
+ *   .           |  |        .
+ *   .           ----        .
+ *   .........................
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/completion.h>
+#include <mach/mbox.h>
+
+#define MBOX_NAME "mbox"
+
+#define MBOX_FIFO_DATA        0x000
+#define MBOX_FIFO_ADD         0x004
+#define MBOX_FIFO_REMOVE      0x008
+#define MBOX_FIFO_THRES_FREE  0x00C
+#define MBOX_FIFO_THRES_OCCUP 0x010
+#define MBOX_FIFO_STATUS      0x014
+
+#define MBOX_DISABLE_IRQ 0x4
+#define MBOX_ENABLE_IRQ  0x0
+#define MBOX_LATCH 1
+
+/* Global list of all mailboxes */
+static struct list_head mboxs = LIST_HEAD_INIT(mboxs);
+
+static struct mbox *get_mbox_with_id(u8 id)
+{
+	u8 i;
+	struct list_head *pos = &mboxs;
+	for (i = 0; i <= id; i++)
+		pos = pos->next;
+
+	return (struct mbox *) list_entry(pos, struct mbox, list);
+}
+
+int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block)
+{
+	int res = 0;
+
+	spin_lock(&mbox->lock);
+
+	dev_dbg(&(mbox->pdev->dev),
+		"About to buffer 0x%X to mailbox 0x%X."
+		" ri = %d, wi = %d\n",
+		mbox_msg, (u32)mbox, mbox->read_index,
+		mbox->write_index);
+
+	/* Check if write buffer is full */
+	while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) {
+		if (!block) {
+			dev_dbg(&(mbox->pdev->dev),
+			"Buffer full in non-blocking call! "
+			"Returning -ENOMEM!\n");
+			res = -ENOMEM;
+			goto exit;
+		}
+		spin_unlock(&mbox->lock);
+		dev_dbg(&(mbox->pdev->dev),
+			"Buffer full in blocking call! Sleeping...\n");
+		mbox->client_blocked = 1;
+		wait_for_completion(&mbox->buffer_available);
+		dev_dbg(&(mbox->pdev->dev),
+			"Blocking send was woken up! Trying again...\n");
+		spin_lock(&mbox->lock);
+	}
+
+	mbox->buffer[mbox->write_index] = mbox_msg;
+	mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE;
+
+	/*
+	 * Indicate that we want an IRQ as soon as there is a slot
+	 * in the FIFO
+	 */
+	writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+
+exit:
+	spin_unlock(&mbox->lock);
+	return res;
+}
+EXPORT_SYMBOL(mbox_send);
+
+#if defined(CONFIG_DEBUG_FS)
+/*
+ * Expected input: <value> <nbr sends>
+ * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times
+ */
+static ssize_t mbox_write_fifo(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf,
+			       size_t count)
+{
+	unsigned long mbox_mess;
+	unsigned long nbr_sends;
+	unsigned long i;
+	char int_buf[16];
+	char *token;
+	char *val;
+
+	struct mbox *mbox = (struct mbox *) dev->platform_data;
+
+	strncpy((char *) &int_buf, buf, sizeof(int_buf));
+	token = (char *) &int_buf;
+
+	/* Parse message */
+	val = strsep(&token, " ");
+	if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0))
+		mbox_mess = 0xDEADBEEF;
+
+	val = strsep(&token, " ");
+	if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0))
+		nbr_sends = 1;
+
+	dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n",
+		mbox_mess, nbr_sends, (u32) mbox);
+
+	for (i = 0; i < nbr_sends; i++)
+		mbox_send(mbox, mbox_mess, true);
+
+	return count;
+}
+
+static ssize_t mbox_read_fifo(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	int mbox_value;
+	struct mbox *mbox = (struct mbox *) dev->platform_data;
+
+	if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0)
+		return sprintf(buf, "Mailbox is empty\n");
+
+	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
+	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
+
+	return sprintf(buf, "0x%X\n", mbox_value);
+}
+
+static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
+
+static int mbox_show(struct seq_file *s, void *data)
+{
+	struct list_head *pos;
+	u8 mbox_index = 0;
+
+	list_for_each(pos, &mboxs) {
+		struct mbox *m =
+			(struct mbox *) list_entry(pos, struct mbox, list);
+		if (m == NULL) {
+			seq_printf(s,
+				   "Unable to retrieve mailbox %d\n",
+				   mbox_index);
+			continue;
+		}
+
+		spin_lock(&m->lock);
+		if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) {
+			seq_printf(s, "MAILBOX %d not setup or corrupt\n",
+				   mbox_index);
+			spin_unlock(&m->lock);
+			continue;
+		}
+
+		seq_printf(s,
+		"===========================\n"
+		" MAILBOX %d\n"
+		" PEER MAILBOX DUMP\n"
+		"---------------------------\n"
+		"FIFO:                 0x%X (%d)\n"
+		"Free     Threshold:   0x%.2X (%d)\n"
+		"Occupied Threshold:   0x%.2X (%d)\n"
+		"Status:               0x%.2X (%d)\n"
+		"   Free spaces  (ot):    %d (%d)\n"
+		"   Occup spaces (ot):    %d (%d)\n"
+		"===========================\n"
+		" LOCAL MAILBOX DUMP\n"
+		"---------------------------\n"
+		"FIFO:                 0x%.X (%d)\n"
+		"Free     Threshold:   0x%.2X (%d)\n"
+		"Occupied Threshold:   0x%.2X (%d)\n"
+		"Status:               0x%.2X (%d)\n"
+		"   Free spaces  (ot):    %d (%d)\n"
+		"   Occup spaces (ot):    %d (%d)\n"
+		"===========================\n"
+		"write_index: %d\n"
+		"read_index : %d\n"
+		"===========================\n"
+		"\n",
+		mbox_index,
+		readl(m->virtbase_peer + MBOX_FIFO_DATA),
+		readl(m->virtbase_peer + MBOX_FIFO_DATA),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
+		readl(m->virtbase_peer + MBOX_FIFO_STATUS),
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7,
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1,
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7,
+		(readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1,
+		readl(m->virtbase_local + MBOX_FIFO_DATA),
+		readl(m->virtbase_local + MBOX_FIFO_DATA),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
+		readl(m->virtbase_local + MBOX_FIFO_STATUS),
+		readl(m->virtbase_local + MBOX_FIFO_STATUS),
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7,
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1,
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7,
+		(readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1,
+		m->write_index, m->read_index);
+		mbox_index++;
+		spin_unlock(&m->lock);
+	}
+
+	return 0;
+}
+
+static int mbox_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, mbox_show, NULL);
+}
+
+static const struct file_operations mbox_operations = {
+	.owner = THIS_MODULE,
+	.open = mbox_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+#endif
+
+static irqreturn_t mbox_irq(int irq, void *arg)
+{
+	u32 mbox_value;
+	int nbr_occup;
+	int nbr_free;
+	struct mbox *mbox = (struct mbox *) arg;
+
+	spin_lock(&mbox->lock);
+
+	dev_dbg(&(mbox->pdev->dev),
+		"mbox IRQ [%d] received. ri = %d, wi = %d\n",
+		irq, mbox->read_index, mbox->write_index);
+
+	/*
+	 * Check if we have any outgoing messages, and if there is space for
+	 * them in the FIFO.
+	 */
+	if (mbox->read_index != mbox->write_index) {
+		/*
+		 * Check by reading FREE for LOCAL since that indicates
+		 * OCCUP for PEER
+		 */
+		nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS)
+			    >> 4) & 0x7;
+		dev_dbg(&(mbox->pdev->dev),
+			"Status indicates %d empty spaces in the FIFO!\n",
+			nbr_free);
+
+		while ((nbr_free > 0) &&
+		       (mbox->read_index != mbox->write_index)) {
+			/* Write the message and latch it into the FIFO */
+			writel(mbox->buffer[mbox->read_index],
+			       (mbox->virtbase_peer + MBOX_FIFO_DATA));
+			writel(MBOX_LATCH,
+			       (mbox->virtbase_peer + MBOX_FIFO_ADD));
+			dev_dbg(&(mbox->pdev->dev),
+				"Wrote message 0x%X to addr 0x%X\n",
+				mbox->buffer[mbox->read_index],
+				(u32) (mbox->virtbase_peer + MBOX_FIFO_DATA));
+
+			nbr_free--;
+			mbox->read_index =
+				(mbox->read_index + 1) % MBOX_BUF_SIZE;
+		}
+
+		/*
+		 * Check if we still want IRQ:s when there is free
+		 * space to send
+		 */
+		if (mbox->read_index != mbox->write_index) {
+			dev_dbg(&(mbox->pdev->dev),
+				"Still have messages to send, but FIFO full. "
+				"Request IRQ again!\n");
+			writel(MBOX_ENABLE_IRQ,
+			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+		} else {
+			dev_dbg(&(mbox->pdev->dev),
+				"No more messages to send. "
+				"Do not request IRQ again!\n");
+			writel(MBOX_DISABLE_IRQ,
+			       mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+		}
+
+		/*
+		 * Check if we can signal any blocked clients that it is OK to
+		 * start buffering again
+		 */
+		if (mbox->client_blocked &&
+		    (((mbox->write_index + 1) % MBOX_BUF_SIZE)
+		     != mbox->read_index)) {
+			dev_dbg(&(mbox->pdev->dev),
+				"Waking up blocked client\n");
+			complete(&mbox->buffer_available);
+			mbox->client_blocked = 0;
+		}
+	}
+
+	/* Check if we have any incoming messages */
+	nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7;
+	if (nbr_occup == 0)
+		goto exit;
+
+	if (mbox->cb == NULL) {
+		dev_dbg(&(mbox->pdev->dev), "No receive callback registered, "
+			"leaving %d incoming messages in fifo!\n", nbr_occup);
+		goto exit;
+	}
+
+	/* Read and acknowledge the message */
+	mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
+	writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
+
+	/* Notify consumer of new mailbox message */
+	dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n",
+		mbox_value);
+	mbox->cb(mbox_value, mbox->client_data);
+
+exit:
+	dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n",
+		mbox->read_index, mbox->write_index);
+	spin_unlock(&mbox->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Setup is executed once for each mbox pair */
+struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv)
+{
+	struct resource *resource;
+	int irq;
+	int res;
+	struct mbox *mbox;
+
+	mbox = get_mbox_with_id(mbox_id);
+	if (mbox == NULL) {
+		dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n",
+			mbox_id);
+		goto exit;
+	}
+
+	/*
+	 * Check if mailbox has been allocated to someone else,
+	 * otherwise allocate it
+	 */
+	if (mbox->allocated) {
+		dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n",
+			mbox_id);
+		mbox = NULL;
+		goto exit;
+	}
+	mbox->allocated = true;
+
+	dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n",
+		mbox_id, (u32)mbox);
+
+	mbox->client_data = priv;
+	mbox->cb = mbox_cb;
+
+	/* Get addr for peer mailbox and ioremap it */
+	resource = platform_get_resource_byname(mbox->pdev,
+						IORESOURCE_MEM,
+						"mbox_peer");
+	if (resource == NULL) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to retrieve mbox peer resource\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"Resource name: %s start: 0x%X, end: 0x%X\n",
+		resource->name, resource->start, resource->end);
+	mbox->virtbase_peer =
+		ioremap(resource->start, resource->end - resource->start);
+	if (!mbox->virtbase_peer) {
+		dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n",
+		resource->start, resource->end, (u32) mbox->virtbase_peer);
+
+	/* Get addr for local mailbox and ioremap it */
+	resource = platform_get_resource_byname(mbox->pdev,
+						IORESOURCE_MEM,
+						"mbox_local");
+	if (resource == NULL) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to retrieve mbox local resource\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"Resource name: %s start: 0x%X, end: 0x%X\n",
+		resource->name, resource->start, resource->end);
+	mbox->virtbase_local =
+		ioremap(resource->start, resource->end - resource->start);
+	if (!mbox->virtbase_local) {
+		dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n");
+		mbox = NULL;
+		goto exit;
+	}
+	dev_dbg(&(mbox->pdev->dev),
+		"ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n",
+		resource->start, resource->end, (u32) mbox->virtbase_peer);
+
+	init_completion(&mbox->buffer_available);
+	mbox->client_blocked = 0;
+
+	/* Get IRQ for mailbox and allocate it */
+	irq = platform_get_irq_byname(mbox->pdev, "mbox_irq");
+	if (irq < 0) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to retrieve mbox irq resource\n");
+		mbox = NULL;
+		goto exit;
+	}
+
+	dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq);
+	res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox);
+	if (res < 0) {
+		dev_err(&(mbox->pdev->dev),
+			"Unable to allocate mbox irq %d\n", irq);
+		mbox = NULL;
+		goto exit;
+	}
+
+	/* Set up mailbox to not launch IRQ on free space in mailbox */
+	writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+
+	/*
+	 * Set up mailbox to launch IRQ on new message if we have
+	 * a callback set. If not, do not raise IRQ, but keep message
+	 * in FIFO for manual retrieval
+	 */
+	if (mbox_cb != NULL)
+		writel(MBOX_ENABLE_IRQ,
+		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
+	else
+		writel(MBOX_DISABLE_IRQ,
+		       mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
+
+#if defined(CONFIG_DEBUG_FS)
+	res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo);
+	if (res != 0)
+		dev_warn(&(mbox->pdev->dev),
+			 "Unable to create mbox sysfs entry");
+
+	(void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL,
+				   NULL, &mbox_operations);
+#endif
+
+	dev_info(&(mbox->pdev->dev),
+		 "Mailbox driver with index %d initated!\n", mbox_id);
+
+exit:
+	return mbox;
+}
+EXPORT_SYMBOL(mbox_setup);
+
+
+int __init mbox_probe(struct platform_device *pdev)
+{
+	struct mbox local_mbox;
+	struct mbox *mbox;
+	int res = 0;
+	dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev);
+
+	memset(&local_mbox, 0x0, sizeof(struct mbox));
+
+	/* Associate our mbox data with the platform device */
+	res = platform_device_add_data(pdev,
+				       (void *) &local_mbox,
+				       sizeof(struct mbox));
+	if (res != 0) {
+		dev_err(&(pdev->dev),
+			"Unable to allocate driver platform data!\n");
+		goto exit;
+	}
+
+	mbox = (struct mbox *) pdev->dev.platform_data;
+	mbox->pdev = pdev;
+	mbox->write_index = 0;
+	mbox->read_index = 0;
+
+	INIT_LIST_HEAD(&(mbox->list));
+	list_add_tail(&(mbox->list), &mboxs);
+
+	sprintf(mbox->name, "%s", MBOX_NAME);
+	spin_lock_init(&mbox->lock);
+
+	dev_info(&(pdev->dev), "Mailbox driver loaded\n");
+
+exit:
+	return res;
+}
+
+static struct platform_driver mbox_driver = {
+	.driver = {
+		.name = MBOX_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init mbox_init(void)
+{
+	return platform_driver_probe(&mbox_driver, mbox_probe);
+}
+
+module_init(mbox_init);
+
+void __exit mbox_exit(void)
+{
+	platform_driver_unregister(&mbox_driver);
+}
+
+module_exit(mbox_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MBOX driver");
diff --git a/arch/arm/mach-ux500/modem_irq.c b/arch/arm/mach-ux500/modem_irq.c
new file mode 100644
index 000000000000..3187f8871169
--- /dev/null
+++ b/arch/arm/mach-ux500/modem_irq.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define MODEM_INTCON_BASE_ADDR 0xBFFD3000
+#define MODEM_INTCON_SIZE 0xFFF
+
+#define DEST_IRQ41_OFFSET 0x2A4
+#define DEST_IRQ43_OFFSET 0x2AC
+#define DEST_IRQ45_OFFSET 0x2B4
+
+#define PRIO_IRQ41_OFFSET 0x6A4
+#define PRIO_IRQ43_OFFSET 0x6AC
+#define PRIO_IRQ45_OFFSET 0x6B4
+
+#define ALLOW_IRQ_OFFSET 0x104
+
+#define MODEM_INTCON_CPU_NBR 0x1
+#define MODEM_INTCON_PRIO_HIGH 0x0
+
+#define MODEM_INTCON_ALLOW_IRQ41 0x0200
+#define MODEM_INTCON_ALLOW_IRQ43 0x0800
+#define MODEM_INTCON_ALLOW_IRQ45 0x2000
+
+#define MODEM_IRQ_REG_OFFSET 0x4
+
+struct modem_irq {
+	void __iomem *modem_intcon_base;
+};
+
+
+static void setup_modem_intcon(void __iomem *modem_intcon_base)
+{
+	/* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */
+	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET);
+	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET);
+	writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET);
+
+	/* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */
+	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET);
+	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET);
+	writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET);
+
+	/* IC_ALLOW_ARRAY - IRQ enable */
+	writel(MODEM_INTCON_ALLOW_IRQ41 |
+		   MODEM_INTCON_ALLOW_IRQ43 |
+		   MODEM_INTCON_ALLOW_IRQ45,
+		   modem_intcon_base + ALLOW_IRQ_OFFSET);
+}
+
+static irqreturn_t modem_cpu_irq_handler(int irq, void *data)
+{
+	int real_irq;
+	int virt_irq;
+	struct modem_irq *mi = (struct modem_irq *)data;
+
+	/* Read modem side IRQ number from modem IRQ controller */
+	real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF;
+	virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq;
+
+	pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X "
+		 "which will be 0x%X (%d) which translates to "
+		 "virtual IRQ 0x%X (%d)!\n",
+		   (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET,
+		   real_irq,
+		   real_irq & 0xFF,
+		   real_irq & 0xFF,
+		   virt_irq,
+		   virt_irq);
+
+	if (virt_irq != 0)
+		generic_handle_irq(virt_irq);
+
+	pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq);
+
+	return IRQ_HANDLED;
+}
+
+static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip)
+{
+	set_irq_chip(irq, modem_irq_chip);
+	set_irq_handler(irq, handle_simple_irq);
+	set_irq_flags(irq, IRQF_VALID);
+
+	pr_debug("modem_irq: Created virtual IRQ %d\n", irq);
+}
+
+static int modem_irq_init(void)
+{
+	int err;
+	static struct irq_chip  modem_irq_chip;
+	struct modem_irq *mi;
+
+	pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n",
+		   IRQ_DB5500_MODEM);
+
+	mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL);
+	if (!mi) {
+		pr_err("modem_irq: Could not allocate device\n");
+		return -ENOMEM;
+	}
+
+	mi->modem_intcon_base =
+		ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE);
+	pr_debug("modem_irq: ioremapped modem_intcon_base from "
+		 "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR,
+		 (u32)mi->modem_intcon_base);
+
+	setup_modem_intcon(mi->modem_intcon_base);
+
+	modem_irq_chip = dummy_irq_chip;
+	modem_irq_chip.name = "modem_irq";
+
+	/* Create the virtual IRQ:s needed */
+	create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip);
+	create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip);
+	create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip);
+
+	err = request_threaded_irq(IRQ_DB5500_MODEM, NULL,
+				   modem_cpu_irq_handler, IRQF_ONESHOT,
+				   "modem_irq", mi);
+	if (err)
+		pr_err("modem_irq: Could not register IRQ %d\n",
+		       IRQ_DB5500_MODEM);
+
+	return 0;
+}
+
+arch_initcall(modem_irq_init);
diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h
new file mode 100644
index 000000000000..bf50c21fe69d
--- /dev/null
+++ b/arch/arm/mach-ux500/pins-db5500.h
@@ -0,0 +1,620 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#ifndef __MACH_DB5500_PINS_H
+#define __MACH_DB5500_PINS_H
+
+#define GPIO0_GPIO		PIN_CFG(0, GPIO)
+#define GPIO0_SM_CS3n		PIN_CFG(0, ALT_A)
+
+#define GPIO1_GPIO		PIN_CFG(1, GPIO)
+#define GPIO1_SM_A3		PIN_CFG(1, ALT_A)
+
+#define GPIO2_GPIO		PIN_CFG(2, GPIO)
+#define GPIO2_SM_A4		PIN_CFG(2, ALT_A)
+#define GPIO2_SM_AVD		PIN_CFG(2, ALT_B)
+
+#define GPIO3_GPIO		PIN_CFG(3, GPIO)
+#define GPIO3_I2C1_SCL		PIN_CFG(3, ALT_A)
+
+#define GPIO4_GPIO		PIN_CFG(4, GPIO)
+#define GPIO4_I2C1_SDA		PIN_CFG(4, ALT_A)
+
+#define GPIO5_GPIO		PIN_CFG(5, GPIO)
+#define GPIO5_MC0_DAT0		PIN_CFG(5, ALT_A)
+#define GPIO5_SM_ADQ8		PIN_CFG(5, ALT_B)
+
+#define GPIO6_GPIO		PIN_CFG(6, GPIO)
+#define GPIO6_MC0_DAT1		PIN_CFG(6, ALT_A)
+#define GPIO6_SM_ADQ0		PIN_CFG(6, ALT_B)
+
+#define GPIO7_GPIO		PIN_CFG(7, GPIO)
+#define GPIO7_MC0_DAT2		PIN_CFG(7, ALT_A)
+#define GPIO7_SM_ADQ9		PIN_CFG(7, ALT_B)
+
+#define GPIO8_GPIO		PIN_CFG(8, GPIO)
+#define GPIO8_MC0_DAT3		PIN_CFG(8, ALT_A)
+#define GPIO8_SM_ADQ1		PIN_CFG(8, ALT_B)
+
+#define GPIO9_GPIO		PIN_CFG(9, GPIO)
+#define GPIO9_MC0_DAT4		PIN_CFG(9, ALT_A)
+#define GPIO9_SM_ADQ10		PIN_CFG(9, ALT_B)
+
+#define GPIO10_GPIO		PIN_CFG(10, GPIO)
+#define GPIO10_MC0_DAT5		PIN_CFG(10, ALT_A)
+#define GPIO10_SM_ADQ2		PIN_CFG(10, ALT_B)
+
+#define GPIO11_GPIO		PIN_CFG(11, GPIO)
+#define GPIO11_MC0_DAT6		PIN_CFG(11, ALT_A)
+#define GPIO11_SM_ADQ11		PIN_CFG(11, ALT_B)
+
+#define GPIO12_GPIO		PIN_CFG(12, GPIO)
+#define GPIO12_MC0_DAT7		PIN_CFG(12, ALT_A)
+#define GPIO12_SM_ADQ3		PIN_CFG(12, ALT_B)
+
+#define GPIO13_GPIO		PIN_CFG(13, GPIO)
+#define GPIO13_MC0_CMD		PIN_CFG(13, ALT_A)
+#define GPIO13_SM_BUSY0n	PIN_CFG(13, ALT_B)
+#define GPIO13_SM_WAIT0n	PIN_CFG(13, ALT_C)
+
+#define GPIO14_GPIO		PIN_CFG(14, GPIO)
+#define GPIO14_MC0_CLK		PIN_CFG(14, ALT_A)
+#define GPIO14_SM_CS1n		PIN_CFG(14, ALT_B)
+#define GPIO14_SM_CKO		PIN_CFG(14, ALT_C)
+
+#define GPIO15_GPIO		PIN_CFG(15, GPIO)
+#define GPIO15_SM_A5		PIN_CFG(15, ALT_A)
+#define GPIO15_SM_CLE		PIN_CFG(15, ALT_B)
+
+#define GPIO16_GPIO		PIN_CFG(16, GPIO)
+#define GPIO16_MC2_CMD		PIN_CFG(16, ALT_A)
+#define GPIO16_SM_OEn		PIN_CFG(16, ALT_B)
+
+#define GPIO17_GPIO		PIN_CFG(17, GPIO)
+#define GPIO17_MC2_CLK		PIN_CFG(17, ALT_A)
+#define GPIO17_SM_WEn		PIN_CFG(17, ALT_B)
+
+#define GPIO18_GPIO		PIN_CFG(18, GPIO)
+#define GPIO18_SM_A6		PIN_CFG(18, ALT_A)
+#define GPIO18_SM_ALE		PIN_CFG(18, ALT_B)
+#define GPIO18_SM_AVDn		PIN_CFG(18, ALT_C)
+
+#define GPIO19_GPIO		PIN_CFG(19, GPIO)
+#define GPIO19_MC2_DAT1		PIN_CFG(19, ALT_A)
+#define GPIO19_SM_ADQ4		PIN_CFG(19, ALT_B)
+
+#define GPIO20_GPIO		PIN_CFG(20, GPIO)
+#define GPIO20_MC2_DAT3		PIN_CFG(20, ALT_A)
+#define GPIO20_SM_ADQ5		PIN_CFG(20, ALT_B)
+
+#define GPIO21_GPIO		PIN_CFG(21, GPIO)
+#define GPIO21_MC2_DAT5		PIN_CFG(21, ALT_A)
+#define GPIO21_SM_ADQ6		PIN_CFG(21, ALT_B)
+
+#define GPIO22_GPIO		PIN_CFG(22, GPIO)
+#define GPIO22_MC2_DAT7		PIN_CFG(22, ALT_A)
+#define GPIO22_SM_ADQ7		PIN_CFG(22, ALT_B)
+
+#define GPIO23_GPIO		PIN_CFG(23, GPIO)
+#define GPIO23_MC2_DAT0		PIN_CFG(23, ALT_A)
+#define GPIO23_SM_ADQ12		PIN_CFG(23, ALT_B)
+#define GPIO23_MC0_DAT1		PIN_CFG(23, ALT_C)
+
+#define GPIO24_GPIO		PIN_CFG(24, GPIO)
+#define GPIO24_MC2_DAT2		PIN_CFG(24, ALT_A)
+#define GPIO24_SM_ADQ13		PIN_CFG(24, ALT_B)
+#define GPIO24_MC0_DAT3		PIN_CFG(24, ALT_C)
+
+#define GPIO25_GPIO		PIN_CFG(25, GPIO)
+#define GPIO25_MC2_DAT4		PIN_CFG(25, ALT_A)
+#define GPIO25_SM_ADQ14		PIN_CFG(25, ALT_B)
+#define GPIO25_MC0_CMD		PIN_CFG(25, ALT_C)
+
+#define GPIO26_GPIO		PIN_CFG(26, GPIO)
+#define GPIO26_MC2_DAT6		PIN_CFG(26, ALT_A)
+#define GPIO26_SM_ADQ15		PIN_CFG(26, ALT_B)
+
+#define GPIO27_GPIO		PIN_CFG(27, GPIO)
+#define GPIO27_SM_CS0n		PIN_CFG(27, ALT_A)
+#define GPIO27_SM_PS0n		PIN_CFG(27, ALT_B)
+
+#define GPIO28_GPIO		PIN_CFG(28, GPIO)
+#define GPIO28_U0_TXD		PIN_CFG(28, ALT_A)
+#define GPIO28_SM_A0		PIN_CFG(28, ALT_B)
+
+#define GPIO29_GPIO		PIN_CFG(29, GPIO)
+#define GPIO29_U0_RXD		PIN_CFG(29, ALT_A)
+#define GPIO29_SM_A1		PIN_CFG(29, ALT_B)
+#define GPIO29_PWM_0		PIN_CFG(29, ALT_C)
+
+#define GPIO30_GPIO		PIN_CFG(30, GPIO)
+#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
+#define GPIO30_SM_A2		PIN_CFG(30, ALT_B)
+#define GPIO30_PWM_1		PIN_CFG(30, ALT_C)
+
+#define GPIO31_GPIO		PIN_CFG(31, GPIO)
+#define GPIO31_MC0_DAT7		PIN_CFG(31, ALT_A)
+#define GPIO31_SM_CS2n		PIN_CFG(31, ALT_B)
+#define GPIO31_PWM_2		PIN_CFG(31, ALT_C)
+
+#define GPIO32_GPIO		PIN_CFG(32, GPIO)
+#define GPIO32_MSP0_TCK		PIN_CFG(32, ALT_A)
+#define GPIO32_ACCI2S0_SCK	PIN_CFG(32, ALT_B)
+
+#define GPIO33_GPIO		PIN_CFG(33, GPIO)
+#define GPIO33_MSP0_TFS		PIN_CFG(33, ALT_A)
+#define GPIO33_ACCI2S0_WS	PIN_CFG(33, ALT_B)
+
+#define GPIO34_GPIO		PIN_CFG(34, GPIO)
+#define GPIO34_MSP0_TXD		PIN_CFG(34, ALT_A)
+#define GPIO34_ACCI2S0_DLD	PIN_CFG(34, ALT_B)
+
+#define GPIO35_GPIO		PIN_CFG(35, GPIO)
+#define GPIO35_MSP0_RXD		PIN_CFG(35, ALT_A)
+#define GPIO35_ACCI2S0_ULD	PIN_CFG(35, ALT_B)
+
+#define GPIO64_GPIO		PIN_CFG(64, GPIO)
+#define GPIO64_USB_DAT0		PIN_CFG(64, ALT_A)
+#define GPIO64_U0_TXD		PIN_CFG(64, ALT_B)
+
+#define GPIO65_GPIO		PIN_CFG(65, GPIO)
+#define GPIO65_USB_DAT1		PIN_CFG(65, ALT_A)
+#define GPIO65_U0_RXD		PIN_CFG(65, ALT_B)
+
+#define GPIO66_GPIO		PIN_CFG(66, GPIO)
+#define GPIO66_USB_DAT2		PIN_CFG(66, ALT_A)
+
+#define GPIO67_GPIO		PIN_CFG(67, GPIO)
+#define GPIO67_USB_DAT3		PIN_CFG(67, ALT_A)
+
+#define GPIO68_GPIO		PIN_CFG(68, GPIO)
+#define GPIO68_USB_DAT4		PIN_CFG(68, ALT_A)
+
+#define GPIO69_GPIO		PIN_CFG(69, GPIO)
+#define GPIO69_USB_DAT5		PIN_CFG(69, ALT_A)
+
+#define GPIO70_GPIO		PIN_CFG(70, GPIO)
+#define GPIO70_USB_DAT6		PIN_CFG(70, ALT_A)
+
+#define GPIO71_GPIO		PIN_CFG(71, GPIO)
+#define GPIO71_USB_DAT7		PIN_CFG(71, ALT_A)
+
+#define GPIO72_GPIO		PIN_CFG(72, GPIO)
+#define GPIO72_USB_STP		PIN_CFG(72, ALT_A)
+
+#define GPIO73_GPIO		PIN_CFG(73, GPIO)
+#define GPIO73_USB_DIR		PIN_CFG(73, ALT_A)
+
+#define GPIO74_GPIO		PIN_CFG(74, GPIO)
+#define GPIO74_USB_NXT		PIN_CFG(74, ALT_A)
+
+#define GPIO75_GPIO		PIN_CFG(75, GPIO)
+#define GPIO75_USB_XCLK		PIN_CFG(75, ALT_A)
+
+#define GPIO76_GPIO		PIN_CFG(76, GPIO)
+
+#define GPIO77_GPIO		PIN_CFG(77, GPIO)
+#define GPIO77_ACCTX_ON		PIN_CFG(77, ALT_A)
+
+#define GPIO78_GPIO		PIN_CFG(78, GPIO)
+#define GPIO78_IRQn		PIN_CFG(78, ALT_A)
+
+#define GPIO79_GPIO		PIN_CFG(79, GPIO)
+#define GPIO79_ACCSIM_Clk	PIN_CFG(79, ALT_A)
+
+#define GPIO80_GPIO		PIN_CFG(80, GPIO)
+#define GPIO80_ACCSIM_Da	PIN_CFG(80, ALT_A)
+
+#define GPIO81_GPIO		PIN_CFG(81, GPIO)
+#define GPIO81_ACCSIM_Reset	PIN_CFG(81, ALT_A)
+
+#define GPIO82_GPIO		PIN_CFG(82, GPIO)
+#define GPIO82_ACCSIM_DDir	PIN_CFG(82, ALT_A)
+
+#define GPIO96_GPIO		PIN_CFG(96, GPIO)
+#define GPIO96_MSP1_TCK		PIN_CFG(96, ALT_A)
+#define GPIO96_PRCMU_DEBUG3	PIN_CFG(96, ALT_B)
+#define GPIO96_PRCMU_DEBUG7	PIN_CFG(96, ALT_C)
+
+#define GPIO97_GPIO		PIN_CFG(97, GPIO)
+#define GPIO97_MSP1_TFS		PIN_CFG(97, ALT_A)
+#define GPIO97_PRCMU_DEBUG2	PIN_CFG(97, ALT_B)
+#define GPIO97_PRCMU_DEBUG6	PIN_CFG(97, ALT_C)
+
+#define GPIO98_GPIO		PIN_CFG(98, GPIO)
+#define GPIO98_MSP1_TXD		PIN_CFG(98, ALT_A)
+#define GPIO98_PRCMU_DEBUG1	PIN_CFG(98, ALT_B)
+#define GPIO98_PRCMU_DEBUG5	PIN_CFG(98, ALT_C)
+
+#define GPIO99_GPIO		PIN_CFG(99, GPIO)
+#define GPIO99_MSP1_RXD		PIN_CFG(99, ALT_A)
+#define GPIO99_PRCMU_DEBUG0	PIN_CFG(99, ALT_B)
+#define GPIO99_PRCMU_DEBUG4	PIN_CFG(99, ALT_C)
+
+#define GPIO100_GPIO		PIN_CFG(100, GPIO)
+#define GPIO100_I2C0_SCL	PIN_CFG(100, ALT_A)
+
+#define GPIO101_GPIO		PIN_CFG(101, GPIO)
+#define GPIO101_I2C0_SDA	PIN_CFG(101, ALT_A)
+
+#define GPIO128_GPIO		PIN_CFG(128, GPIO)
+#define GPIO128_KP_I0		PIN_CFG(128, ALT_A)
+#define GPIO128_BUSMON_D0	PIN_CFG(128, ALT_B)
+
+#define GPIO129_GPIO		PIN_CFG(129, GPIO)
+#define GPIO129_KP_O0		PIN_CFG(129, ALT_A)
+#define GPIO129_BUSMON_D1	PIN_CFG(129, ALT_B)
+
+#define GPIO130_GPIO		PIN_CFG(130, GPIO)
+#define GPIO130_KP_I1		PIN_CFG(130, ALT_A)
+#define GPIO130_BUSMON_D2	PIN_CFG(130, ALT_B)
+
+#define GPIO131_GPIO		PIN_CFG(131, GPIO)
+#define GPIO131_KP_O1		PIN_CFG(131, ALT_A)
+#define GPIO131_BUSMON_D3	PIN_CFG(131, ALT_B)
+
+#define GPIO132_GPIO		PIN_CFG(132, GPIO)
+#define GPIO132_KP_I2		PIN_CFG(132, ALT_A)
+#define GPIO132_ETM_D15		PIN_CFG(132, ALT_B)
+#define GPIO132_STMAPE_CLK	PIN_CFG(132, ALT_C)
+
+#define GPIO133_GPIO		PIN_CFG(133, GPIO)
+#define GPIO133_KP_O2		PIN_CFG(133, ALT_A)
+#define GPIO133_ETM_D14		PIN_CFG(133, ALT_B)
+#define GPIO133_U0_RXD		PIN_CFG(133, ALT_C)
+
+#define GPIO134_GPIO		PIN_CFG(134, GPIO)
+#define GPIO134_KP_I3		PIN_CFG(134, ALT_A)
+#define GPIO134_ETM_D13		PIN_CFG(134, ALT_B)
+#define GPIO134_STMAPE_DAT0	PIN_CFG(134, ALT_C)
+
+#define GPIO135_GPIO		PIN_CFG(135, GPIO)
+#define GPIO135_KP_O3		PIN_CFG(135, ALT_A)
+#define GPIO135_ETM_D12		PIN_CFG(135, ALT_B)
+#define GPIO135_STMAPE_DAT1	PIN_CFG(135, ALT_C)
+
+#define GPIO136_GPIO		PIN_CFG(136, GPIO)
+#define GPIO136_KP_I4		PIN_CFG(136, ALT_A)
+#define GPIO136_ETM_D11		PIN_CFG(136, ALT_B)
+#define GPIO136_STMAPE_DAT2	PIN_CFG(136, ALT_C)
+
+#define GPIO137_GPIO		PIN_CFG(137, GPIO)
+#define GPIO137_KP_O4		PIN_CFG(137, ALT_A)
+#define GPIO137_ETM_D10		PIN_CFG(137, ALT_B)
+#define GPIO137_STMAPE_DAT3	PIN_CFG(137, ALT_C)
+
+#define GPIO138_GPIO		PIN_CFG(138, GPIO)
+#define GPIO138_KP_I5		PIN_CFG(138, ALT_A)
+#define GPIO138_ETM_D9		PIN_CFG(138, ALT_B)
+#define GPIO138_U0_TXD		PIN_CFG(138, ALT_C)
+
+#define GPIO139_GPIO		PIN_CFG(139, GPIO)
+#define GPIO139_KP_O5		PIN_CFG(139, ALT_A)
+#define GPIO139_ETM_D8		PIN_CFG(139, ALT_B)
+#define GPIO139_BUSMON_D11	PIN_CFG(139, ALT_C)
+
+#define GPIO140_GPIO		PIN_CFG(140, GPIO)
+#define GPIO140_KP_I6		PIN_CFG(140, ALT_A)
+#define GPIO140_ETM_D7		PIN_CFG(140, ALT_B)
+#define GPIO140_STMAPE_CLK	PIN_CFG(140, ALT_C)
+
+#define GPIO141_GPIO		PIN_CFG(141, GPIO)
+#define GPIO141_KP_O6		PIN_CFG(141, ALT_A)
+#define GPIO141_ETM_D6		PIN_CFG(141, ALT_B)
+#define GPIO141_U0_RXD		PIN_CFG(141, ALT_C)
+
+#define GPIO142_GPIO		PIN_CFG(142, GPIO)
+#define GPIO142_KP_I7		PIN_CFG(142, ALT_A)
+#define GPIO142_ETM_D5		PIN_CFG(142, ALT_B)
+#define GPIO142_STMAPE_DAT0	PIN_CFG(142, ALT_C)
+
+#define GPIO143_GPIO		PIN_CFG(143, GPIO)
+#define GPIO143_KP_O7		PIN_CFG(143, ALT_A)
+#define GPIO143_ETM_D4		PIN_CFG(143, ALT_B)
+#define GPIO143_STMAPE_DAT1	PIN_CFG(143, ALT_C)
+
+#define GPIO144_GPIO		PIN_CFG(144, GPIO)
+#define GPIO144_I2C3_SCL	PIN_CFG(144, ALT_A)
+#define GPIO144_ETM_D3		PIN_CFG(144, ALT_B)
+#define GPIO144_STMAPE_DAT2	PIN_CFG(144, ALT_C)
+
+#define GPIO145_GPIO		PIN_CFG(145, GPIO)
+#define GPIO145_I2C3_SDA	PIN_CFG(145, ALT_A)
+#define GPIO145_ETM_D2		PIN_CFG(145, ALT_B)
+#define GPIO145_STMAPE_DAT3	PIN_CFG(145, ALT_C)
+
+#define GPIO146_GPIO		PIN_CFG(146, GPIO)
+#define GPIO146_PWM_0		PIN_CFG(146, ALT_A)
+#define GPIO146_ETM_D1		PIN_CFG(146, ALT_B)
+
+#define GPIO147_GPIO		PIN_CFG(147, GPIO)
+#define GPIO147_PWM_1		PIN_CFG(147, ALT_A)
+#define GPIO147_ETM_D0		PIN_CFG(147, ALT_B)
+
+#define GPIO148_GPIO		PIN_CFG(148, GPIO)
+#define GPIO148_PWM_2		PIN_CFG(148, ALT_A)
+#define GPIO148_ETM_CLK		PIN_CFG(148, ALT_B)
+
+#define GPIO160_GPIO		PIN_CFG(160, GPIO)
+#define GPIO160_CLKOUT_REQn	PIN_CFG(160, ALT_A)
+
+#define GPIO161_GPIO		PIN_CFG(161, GPIO)
+#define GPIO161_CLKOUT_0	PIN_CFG(161, ALT_A)
+
+#define GPIO162_GPIO		PIN_CFG(162, GPIO)
+#define GPIO162_CLKOUT_1	PIN_CFG(162, ALT_A)
+
+#define GPIO163_GPIO		PIN_CFG(163, GPIO)
+
+#define GPIO164_GPIO		PIN_CFG(164, GPIO)
+#define GPIO164_GPS_START	PIN_CFG(164, ALT_A)
+
+#define GPIO165_GPIO		PIN_CFG(165, GPIO)
+#define GPIO165_SPI1_CS2n	PIN_CFG(165, ALT_A)
+#define GPIO165_U3_RXD		PIN_CFG(165, ALT_B)
+#define GPIO165_BUSMON_D20	PIN_CFG(165, ALT_C)
+
+#define GPIO166_GPIO		PIN_CFG(166, GPIO)
+#define GPIO166_SPI1_CS1n	PIN_CFG(166, ALT_A)
+#define GPIO166_U3_TXD		PIN_CFG(166, ALT_B)
+#define GPIO166_BUSMON_D21	PIN_CFG(166, ALT_C)
+
+#define GPIO167_GPIO		PIN_CFG(167, GPIO)
+#define GPIO167_SPI1_CS0n	PIN_CFG(167, ALT_A)
+#define GPIO167_U3_RTSn		PIN_CFG(167, ALT_B)
+#define GPIO167_BUSMON_D22	PIN_CFG(167, ALT_C)
+
+#define GPIO168_GPIO		PIN_CFG(168, GPIO)
+#define GPIO168_SPI1_RXD	PIN_CFG(168, ALT_A)
+#define GPIO168_U3_CTSn		PIN_CFG(168, ALT_B)
+#define GPIO168_BUSMON_D23	PIN_CFG(168, ALT_C)
+
+#define GPIO169_GPIO		PIN_CFG(169, GPIO)
+#define GPIO169_SPI1_TXD	PIN_CFG(169, ALT_A)
+#define GPIO169_DDR_RC		PIN_CFG(169, ALT_B)
+#define GPIO169_BUSMON_D24	PIN_CFG(169, ALT_C)
+
+#define GPIO170_GPIO		PIN_CFG(170, GPIO)
+#define GPIO170_SPI1_CLK	PIN_CFG(170, ALT_A)
+
+#define GPIO171_GPIO		PIN_CFG(171, GPIO)
+#define GPIO171_MC3_DAT0	PIN_CFG(171, ALT_A)
+#define GPIO171_SPI3_RXD	PIN_CFG(171, ALT_B)
+#define GPIO171_BUSMON_D25	PIN_CFG(171, ALT_C)
+
+#define GPIO172_GPIO		PIN_CFG(172, GPIO)
+#define GPIO172_MC3_DAT1	PIN_CFG(172, ALT_A)
+#define GPIO172_SPI3_CS1n	PIN_CFG(172, ALT_B)
+#define GPIO172_BUSMON_D26	PIN_CFG(172, ALT_C)
+
+#define GPIO173_GPIO		PIN_CFG(173, GPIO)
+#define GPIO173_MC3_DAT2	PIN_CFG(173, ALT_A)
+#define GPIO173_SPI3_CS2n	PIN_CFG(173, ALT_B)
+#define GPIO173_BUSMON_D27	PIN_CFG(173, ALT_C)
+
+#define GPIO174_GPIO		PIN_CFG(174, GPIO)
+#define GPIO174_MC3_DAT3	PIN_CFG(174, ALT_A)
+#define GPIO174_SPI3_CS0n	PIN_CFG(174, ALT_B)
+#define GPIO174_BUSMON_D28	PIN_CFG(174, ALT_C)
+
+#define GPIO175_GPIO		PIN_CFG(175, GPIO)
+#define GPIO175_MC3_CMD		PIN_CFG(175, ALT_A)
+#define GPIO175_SPI3_TXD	PIN_CFG(175, ALT_B)
+#define GPIO175_BUSMON_D29	PIN_CFG(175, ALT_C)
+
+#define GPIO176_GPIO		PIN_CFG(176, GPIO)
+#define GPIO176_MC3_CLK		PIN_CFG(176, ALT_A)
+#define GPIO176_SPI3_CLK	PIN_CFG(176, ALT_B)
+
+#define GPIO177_GPIO		PIN_CFG(177, GPIO)
+#define GPIO177_U2_RXD		PIN_CFG(177, ALT_A)
+#define GPIO177_I2C3_SCL	PIN_CFG(177, ALT_B)
+#define GPIO177_BUSMON_D30	PIN_CFG(177, ALT_C)
+
+#define GPIO178_GPIO		PIN_CFG(178, GPIO)
+#define GPIO178_U2_TXD		PIN_CFG(178, ALT_A)
+#define GPIO178_I2C3_SDA	PIN_CFG(178, ALT_B)
+#define GPIO178_BUSMON_D31	PIN_CFG(178, ALT_C)
+
+#define GPIO179_GPIO		PIN_CFG(179, GPIO)
+#define GPIO179_U2_CTSn		PIN_CFG(179, ALT_A)
+#define GPIO179_U3_RXD		PIN_CFG(179, ALT_B)
+#define GPIO179_BUSMON_D32	PIN_CFG(179, ALT_C)
+
+#define GPIO180_GPIO		PIN_CFG(180, GPIO)
+#define GPIO180_U2_RTSn		PIN_CFG(180, ALT_A)
+#define GPIO180_U3_TXD		PIN_CFG(180, ALT_B)
+#define GPIO180_BUSMON_D33	PIN_CFG(180, ALT_C)
+
+#define GPIO185_GPIO		PIN_CFG(185, GPIO)
+#define GPIO185_SPI3_CS2n	PIN_CFG(185, ALT_A)
+#define GPIO185_MC4_DAT0	PIN_CFG(185, ALT_B)
+
+#define GPIO186_GPIO		PIN_CFG(186, GPIO)
+#define GPIO186_SPI3_CS1n	PIN_CFG(186, ALT_A)
+#define GPIO186_MC4_DAT1	PIN_CFG(186, ALT_B)
+
+#define GPIO187_GPIO		PIN_CFG(187, GPIO)
+#define GPIO187_SPI3_CS0n	PIN_CFG(187, ALT_A)
+#define GPIO187_MC4_DAT2	PIN_CFG(187, ALT_B)
+
+#define GPIO188_GPIO		PIN_CFG(188, GPIO)
+#define GPIO188_SPI3_RXD	PIN_CFG(188, ALT_A)
+#define GPIO188_MC4_DAT3	PIN_CFG(188, ALT_B)
+
+#define GPIO189_GPIO		PIN_CFG(189, GPIO)
+#define GPIO189_SPI3_TXD	PIN_CFG(189, ALT_A)
+#define GPIO189_MC4_CMD		PIN_CFG(189, ALT_B)
+
+#define GPIO190_GPIO		PIN_CFG(190, GPIO)
+#define GPIO190_SPI3_CLK	PIN_CFG(190, ALT_A)
+#define GPIO190_MC4_CLK		PIN_CFG(190, ALT_B)
+
+#define GPIO191_GPIO		PIN_CFG(191, GPIO)
+#define GPIO191_MC1_DAT0	PIN_CFG(191, ALT_A)
+#define GPIO191_MC4_DAT4	PIN_CFG(191, ALT_B)
+#define GPIO191_STMAPE_DAT0	PIN_CFG(191, ALT_C)
+
+#define GPIO192_GPIO		PIN_CFG(192, GPIO)
+#define GPIO192_MC1_DAT1	PIN_CFG(192, ALT_A)
+#define GPIO192_MC4_DAT5	PIN_CFG(192, ALT_B)
+#define GPIO192_STMAPE_DAT1	PIN_CFG(192, ALT_C)
+
+#define GPIO193_GPIO		PIN_CFG(193, GPIO)
+#define GPIO193_MC1_DAT2	PIN_CFG(193, ALT_A)
+#define GPIO193_MC4_DAT6	PIN_CFG(193, ALT_B)
+#define GPIO193_STMAPE_DAT2	PIN_CFG(193, ALT_C)
+
+#define GPIO194_GPIO		PIN_CFG(194, GPIO)
+#define GPIO194_MC1_DAT3	PIN_CFG(194, ALT_A)
+#define GPIO194_MC4_DAT7	PIN_CFG(194, ALT_B)
+#define GPIO194_STMAPE_DAT3	PIN_CFG(194, ALT_C)
+
+#define GPIO195_GPIO		PIN_CFG(195, GPIO)
+#define GPIO195_MC1_CLK		PIN_CFG(195, ALT_A)
+#define GPIO195_STMAPE_CLK	PIN_CFG(195, ALT_B)
+#define GPIO195_BUSMON_CLK	PIN_CFG(195, ALT_C)
+
+#define GPIO196_GPIO		PIN_CFG(196, GPIO)
+#define GPIO196_MC1_CMD		PIN_CFG(196, ALT_A)
+#define GPIO196_U0_RXD		PIN_CFG(196, ALT_B)
+#define GPIO196_BUSMON_D38	PIN_CFG(196, ALT_C)
+
+#define GPIO197_GPIO		PIN_CFG(197, GPIO)
+#define GPIO197_MC1_CMDDIR	PIN_CFG(197, ALT_A)
+#define GPIO197_BUSMON_D39	PIN_CFG(197, ALT_B)
+
+#define GPIO198_GPIO		PIN_CFG(198, GPIO)
+#define GPIO198_MC1_FBCLK	PIN_CFG(198, ALT_A)
+
+#define GPIO199_GPIO		PIN_CFG(199, GPIO)
+#define GPIO199_MC1_DAT0DIR	PIN_CFG(199, ALT_A)
+#define GPIO199_BUSMON_D40	PIN_CFG(199, ALT_B)
+
+#define GPIO200_GPIO		PIN_CFG(200, GPIO)
+#define GPIO200_U1_TXD		PIN_CFG(200, ALT_A)
+#define GPIO200_ACCU0_RTSn	PIN_CFG(200, ALT_B)
+
+#define GPIO201_GPIO		PIN_CFG(201, GPIO)
+#define GPIO201_U1_RXD		PIN_CFG(201, ALT_A)
+#define GPIO201_ACCU0_CTSn	PIN_CFG(201, ALT_B)
+
+#define GPIO202_GPIO		PIN_CFG(202, GPIO)
+#define GPIO202_U1_CTSn		PIN_CFG(202, ALT_A)
+#define GPIO202_ACCU0_RXD	PIN_CFG(202, ALT_B)
+
+#define GPIO203_GPIO		PIN_CFG(203, GPIO)
+#define GPIO203_U1_RTSn		PIN_CFG(203, ALT_A)
+#define GPIO203_ACCU0_TXD	PIN_CFG(203, ALT_B)
+
+#define GPIO204_GPIO		PIN_CFG(204, GPIO)
+#define GPIO204_SPI0_CS2n	PIN_CFG(204, ALT_A)
+#define GPIO204_ACCGPIO_000	PIN_CFG(204, ALT_B)
+#define GPIO204_LCD_VSI1	PIN_CFG(204, ALT_C)
+
+#define GPIO205_GPIO		PIN_CFG(205, GPIO)
+#define GPIO205_SPI0_CS1n	PIN_CFG(205, ALT_A)
+#define GPIO205_ACCGPIO_001	PIN_CFG(205, ALT_B)
+#define GPIO205_LCD_D3		PIN_CFG(205, ALT_C)
+
+#define GPIO206_GPIO		PIN_CFG(206, GPIO)
+#define GPIO206_SPI0_CS0n	PIN_CFG(206, ALT_A)
+#define GPIO206_ACCGPIO_002	PIN_CFG(206, ALT_B)
+#define GPIO206_LCD_D2		PIN_CFG(206, ALT_C)
+
+#define GPIO207_GPIO		PIN_CFG(207, GPIO)
+#define GPIO207_SPI0_RXD	PIN_CFG(207, ALT_A)
+#define GPIO207_ACCGPIO_003	PIN_CFG(207, ALT_B)
+#define GPIO207_LCD_D1		PIN_CFG(207, ALT_C)
+
+#define GPIO208_GPIO		PIN_CFG(208, GPIO)
+#define GPIO208_SPI0_TXD	PIN_CFG(208, ALT_A)
+#define GPIO208_ACCGPIO_004	PIN_CFG(208, ALT_B)
+#define GPIO208_LCD_D0		PIN_CFG(208, ALT_C)
+
+#define GPIO209_GPIO		PIN_CFG(209, GPIO)
+#define GPIO209_SPI0_CLK	PIN_CFG(209, ALT_A)
+#define GPIO209_ACCGPIO_005	PIN_CFG(209, ALT_B)
+#define GPIO209_LCD_CLK		PIN_CFG(209, ALT_C)
+
+#define GPIO210_GPIO		PIN_CFG(210, GPIO)
+#define GPIO210_LCD_VSO		PIN_CFG(210, ALT_A)
+#define GPIO210_PRCMU_PWRCTRL1	PIN_CFG(210, ALT_B)
+
+#define GPIO211_GPIO		PIN_CFG(211, GPIO)
+#define GPIO211_LCD_VSI0	PIN_CFG(211, ALT_A)
+#define GPIO211_PRCMU_PWRCTRL2	PIN_CFG(211, ALT_B)
+
+#define GPIO212_GPIO		PIN_CFG(212, GPIO)
+#define GPIO212_SPI2_CS2n	PIN_CFG(212, ALT_A)
+#define GPIO212_LCD_HSO		PIN_CFG(212, ALT_B)
+
+#define GPIO213_GPIO		PIN_CFG(213, GPIO)
+#define GPIO213_SPI2_CS1n	PIN_CFG(213, ALT_A)
+#define GPIO213_LCD_DE		PIN_CFG(213, ALT_B)
+#define GPIO213_BUSMON_D16	PIN_CFG(213, ALT_C)
+
+#define GPIO214_GPIO		PIN_CFG(214, GPIO)
+#define GPIO214_SPI2_CS0n	PIN_CFG(214, ALT_A)
+#define GPIO214_LCD_D7		PIN_CFG(214, ALT_B)
+#define GPIO214_BUSMON_D17	PIN_CFG(214, ALT_C)
+
+#define GPIO215_GPIO		PIN_CFG(215, GPIO)
+#define GPIO215_SPI2_RXD	PIN_CFG(215, ALT_A)
+#define GPIO215_LCD_D6		PIN_CFG(215, ALT_B)
+#define GPIO215_BUSMON_D18	PIN_CFG(215, ALT_C)
+
+#define GPIO216_GPIO		PIN_CFG(216, GPIO)
+#define GPIO216_SPI2_CLK	PIN_CFG(216, ALT_A)
+#define GPIO216_LCD_D5		PIN_CFG(216, ALT_B)
+
+#define GPIO217_GPIO		PIN_CFG(217, GPIO)
+#define GPIO217_SPI2_TXD	PIN_CFG(217, ALT_A)
+#define GPIO217_LCD_D4		PIN_CFG(217, ALT_B)
+#define GPIO217_BUSMON_D19	PIN_CFG(217, ALT_C)
+
+#define GPIO218_GPIO		PIN_CFG(218, GPIO)
+#define GPIO218_I2C2_SCL	PIN_CFG(218, ALT_A)
+#define GPIO218_LCD_VSO		PIN_CFG(218, ALT_B)
+
+#define GPIO219_GPIO		PIN_CFG(219, GPIO)
+#define GPIO219_I2C2_SDA	PIN_CFG(219, ALT_A)
+#define GPIO219_LCD_D3		PIN_CFG(219, ALT_B)
+
+#define GPIO220_GPIO		PIN_CFG(220, GPIO)
+#define GPIO220_MSP2_TCK	PIN_CFG(220, ALT_A)
+#define GPIO220_LCD_D2		PIN_CFG(220, ALT_B)
+
+#define GPIO221_GPIO		PIN_CFG(221, GPIO)
+#define GPIO221_MSP2_TFS	PIN_CFG(221, ALT_A)
+#define GPIO221_LCD_D1		PIN_CFG(221, ALT_B)
+
+#define GPIO222_GPIO		PIN_CFG(222, GPIO)
+#define GPIO222_MSP2_TXD	PIN_CFG(222, ALT_A)
+#define GPIO222_LCD_D0		PIN_CFG(222, ALT_B)
+
+#define GPIO223_GPIO		PIN_CFG(223, GPIO)
+#define GPIO223_MSP2_RXD	PIN_CFG(223, ALT_A)
+#define GPIO223_LCD_CLK		PIN_CFG(223, ALT_B)
+
+#define GPIO224_GPIO		PIN_CFG(224, GPIO)
+#define GPIO224_PRCMU_PWRCTRL0	PIN_CFG(224, ALT_A)
+#define GPIO224_LCD_VSI1	PIN_CFG(224, ALT_B)
+
+#define GPIO225_GPIO		PIN_CFG(225, GPIO)
+#define GPIO225_PRCMU_PWRCTRL1	PIN_CFG(225, ALT_A)
+#define GPIO225_IRDA_RXD	PIN_CFG(225, ALT_B)
+
+#define GPIO226_GPIO		PIN_CFG(226, GPIO)
+#define GPIO226_PRCMU_PWRCTRL2	PIN_CFG(226, ALT_A)
+#define GPIO226_IRRC_DAT	PIN_CFG(226, ALT_B)
+
+#define GPIO227_GPIO		PIN_CFG(227, GPIO)
+#define GPIO227_IRRC_DAT	PIN_CFG(227, ALT_A)
+#define GPIO227_IRDA_TXD	PIN_CFG(227, ALT_B)
+
+#endif
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
new file mode 100644
index 000000000000..f923764ee16c
--- /dev/null
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -0,0 +1,742 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#ifndef __MACH_PINS_DB8500_H
+#define __MACH_PINS_DB8500_H
+
+/*
+ * TODO: Eventually encode all non-board specific pull up/down configuration
+ * here.
+ */
+
+#define GPIO0_GPIO		PIN_CFG(0, GPIO)
+#define GPIO0_U0_CTSn		PIN_CFG(0, ALT_A)
+#define GPIO0_TRIG_OUT		PIN_CFG(0, ALT_B)
+#define GPIO0_IP_TDO		PIN_CFG(0, ALT_C)
+
+#define GPIO1_GPIO		PIN_CFG(1, GPIO)
+#define GPIO1_U0_RTSn		PIN_CFG(1, ALT_A)
+#define GPIO1_TRIG_IN		PIN_CFG(1, ALT_B)
+#define GPIO1_IP_TDI		PIN_CFG(1, ALT_C)
+
+#define GPIO2_GPIO		PIN_CFG(2, GPIO)
+#define GPIO2_U0_RXD		PIN_CFG(2, ALT_A)
+#define GPIO2_NONE		PIN_CFG(2, ALT_B)
+#define GPIO2_IP_TMS		PIN_CFG(2, ALT_C)
+
+#define GPIO3_GPIO		PIN_CFG(3, GPIO)
+#define GPIO3_U0_TXD		PIN_CFG(3, ALT_A)
+#define GPIO3_NONE		PIN_CFG(3, ALT_B)
+#define GPIO3_IP_TCK		PIN_CFG(3, ALT_C)
+
+#define GPIO4_GPIO		PIN_CFG(4, GPIO)
+#define GPIO4_U1_RXD		PIN_CFG(4, ALT_A)
+#define GPIO4_I2C4_SCL		PIN_CFG_PULL(4, ALT_B, UP)
+#define GPIO4_IP_TRSTn		PIN_CFG(4, ALT_C)
+
+#define GPIO5_GPIO		PIN_CFG(5, GPIO)
+#define GPIO5_U1_TXD		PIN_CFG(5, ALT_A)
+#define GPIO5_I2C4_SDA		PIN_CFG_PULL(5, ALT_B, UP)
+#define GPIO5_IP_GPIO6		PIN_CFG(5, ALT_C)
+
+#define GPIO6_GPIO		PIN_CFG(6, GPIO)
+#define GPIO6_U1_CTSn		PIN_CFG(6, ALT_A)
+#define GPIO6_I2C1_SCL		PIN_CFG_PULL(6, ALT_B, UP)
+#define GPIO6_IP_GPIO0		PIN_CFG(6, ALT_C)
+
+#define GPIO7_GPIO		PIN_CFG(7, GPIO)
+#define GPIO7_U1_RTSn		PIN_CFG(7, ALT_A)
+#define GPIO7_I2C1_SDA		PIN_CFG_PULL(7, ALT_B, UP)
+#define GPIO7_IP_GPIO1		PIN_CFG(7, ALT_C)
+
+#define GPIO8_GPIO		PIN_CFG(8, GPIO)
+#define GPIO8_IPI2C_SDA		PIN_CFG_PULL(8, ALT_A, UP)
+#define GPIO8_I2C2_SDA		PIN_CFG_PULL(8, ALT_B, UP)
+
+#define GPIO9_GPIO		PIN_CFG(9, GPIO)
+#define GPIO9_IPI2C_SCL		PIN_CFG_PULL(9, ALT_A, UP)
+#define GPIO9_I2C2_SCL		PIN_CFG_PULL(9, ALT_B, UP)
+
+#define GPIO10_GPIO		PIN_CFG(10, GPIO)
+#define GPIO10_IPI2C_SDA	PIN_CFG_PULL(10, ALT_A, UP)
+#define GPIO10_I2C2_SDA		PIN_CFG_PULL(10, ALT_B, UP)
+#define GPIO10_IP_GPIO3		PIN_CFG(10, ALT_C)
+
+#define GPIO11_GPIO		PIN_CFG(11, GPIO)
+#define GPIO11_IPI2C_SCL	PIN_CFG_PULL(11, ALT_A, UP)
+#define GPIO11_I2C2_SCL		PIN_CFG_PULL(11, ALT_B, UP)
+#define GPIO11_IP_GPIO2		PIN_CFG(11, ALT_C)
+
+#define GPIO12_GPIO		PIN_CFG(12, GPIO)
+#define GPIO12_MSP0_TXD		PIN_CFG(12, ALT_A)
+#define GPIO12_MSP0_RXD		PIN_CFG(12, ALT_B)
+
+#define GPIO13_GPIO		PIN_CFG(13, GPIO)
+#define GPIO13_MSP0_TFS		PIN_CFG(13, ALT_A)
+
+#define GPIO14_GPIO		PIN_CFG(14, GPIO)
+#define GPIO14_MSP0_TCK		PIN_CFG(14, ALT_A)
+
+#define GPIO15_GPIO		PIN_CFG(15, GPIO)
+#define GPIO15_MSP0_RXD		PIN_CFG(15, ALT_A)
+#define GPIO15_MSP0_TXD		PIN_CFG(15, ALT_B)
+
+#define GPIO16_GPIO		PIN_CFG(16, GPIO)
+#define GPIO16_MSP0_RFS		PIN_CFG(16, ALT_A)
+#define GPIO16_I2C1_SCL		PIN_CFG_PULL(16, ALT_B, UP)
+#define GPIO16_SLIM0_DAT	PIN_CFG(16, ALT_C)
+
+#define GPIO17_GPIO		PIN_CFG(17, GPIO)
+#define GPIO17_MSP0_RCK		PIN_CFG(17, ALT_A)
+#define GPIO17_I2C1_SDA		PIN_CFG_PULL(17, ALT_B, UP)
+#define GPIO17_SLIM0_CLK	PIN_CFG(17, ALT_C)
+
+#define GPIO18_GPIO		PIN_CFG(18, GPIO)
+#define GPIO18_MC0_CMDDIR	PIN_CFG_PULL(18, ALT_A, UP)
+#define GPIO18_U2_RXD		PIN_CFG(18, ALT_B)
+#define GPIO18_MS_IEP		PIN_CFG(18, ALT_C)
+
+#define GPIO19_GPIO		PIN_CFG(19, GPIO)
+#define GPIO19_MC0_DAT0DIR	PIN_CFG_PULL(19, ALT_A, UP)
+#define GPIO19_U2_TXD		PIN_CFG(19, ALT_B)
+#define GPIO19_MS_DAT0DIR	PIN_CFG(19, ALT_C)
+
+#define GPIO20_GPIO		PIN_CFG(20, GPIO)
+#define GPIO20_MC0_DAT2DIR	PIN_CFG_PULL(20, ALT_A, UP)
+#define GPIO20_UARTMOD_TXD	PIN_CFG(20, ALT_B)
+#define GPIO20_IP_TRIGOUT	PIN_CFG(20, ALT_C)
+
+#define GPIO21_GPIO		PIN_CFG(21, GPIO)
+#define GPIO21_MC0_DAT31DIR	PIN_CFG_PULL(21, ALT_A, UP)
+#define GPIO21_MSP0_SCK		PIN_CFG(21, ALT_B)
+#define GPIO21_MS_DAT31DIR	PIN_CFG(21, ALT_C)
+
+#define GPIO22_GPIO		PIN_CFG(22, GPIO)
+#define GPIO22_MC0_FBCLK	PIN_CFG_PULL(22, ALT_A, UP)
+#define GPIO22_UARTMOD_RXD	PIN_CFG(22, ALT_B)
+#define GPIO22_MS_FBCLK		PIN_CFG(22, ALT_C)
+
+#define GPIO23_GPIO		PIN_CFG(23, GPIO)
+#define GPIO23_MC0_CLK		PIN_CFG_PULL(23, ALT_A, UP)
+#define GPIO23_STMMOD_CLK	PIN_CFG(23, ALT_B)
+#define GPIO23_MS_CLK		PIN_CFG(23, ALT_C)
+
+#define GPIO24_GPIO		PIN_CFG(24, GPIO)
+#define GPIO24_MC0_CMD		PIN_CFG_PULL(24, ALT_A, UP)
+#define GPIO24_UARTMOD_RXD	PIN_CFG(24, ALT_B)
+#define GPIO24_MS_BS		PIN_CFG(24, ALT_C)
+
+#define GPIO25_GPIO		PIN_CFG(25, GPIO)
+#define GPIO25_MC0_DAT0		PIN_CFG_PULL(25, ALT_A, UP)
+#define GPIO25_STMMOD_DAT0	PIN_CFG(25, ALT_B)
+#define GPIO25_MS_DAT0		PIN_CFG(25, ALT_C)
+
+#define GPIO26_GPIO		PIN_CFG(26, GPIO)
+#define GPIO26_MC0_DAT1		PIN_CFG_PULL(26, ALT_A, UP)
+#define GPIO26_STMMOD_DAT1	PIN_CFG(26, ALT_B)
+#define GPIO26_MS_DAT1		PIN_CFG(26, ALT_C)
+
+#define GPIO27_GPIO		PIN_CFG(27, GPIO)
+#define GPIO27_MC0_DAT2		PIN_CFG_PULL(27, ALT_A, UP)
+#define GPIO27_STMMOD_DAT2	PIN_CFG(27, ALT_B)
+#define GPIO27_MS_DAT2		PIN_CFG(27, ALT_C)
+
+#define GPIO28_GPIO		PIN_CFG(28, GPIO)
+#define GPIO28_MC0_DAT3		PIN_CFG_PULL(28, ALT_A, UP)
+#define GPIO28_STMMOD_DAT3	PIN_CFG(28, ALT_B)
+#define GPIO28_MS_DAT3		PIN_CFG(28, ALT_C)
+
+#define GPIO29_GPIO		PIN_CFG(29, GPIO)
+#define GPIO29_MC0_DAT4		PIN_CFG(29, ALT_A)
+#define GPIO29_SPI3_CLK		PIN_CFG(29, ALT_B)
+#define GPIO29_U2_RXD		PIN_CFG(29, ALT_C)
+
+#define GPIO30_GPIO		PIN_CFG(30, GPIO)
+#define GPIO30_MC0_DAT5		PIN_CFG(30, ALT_A)
+#define GPIO30_SPI3_RXD		PIN_CFG(30, ALT_B)
+#define GPIO30_U2_TXD		PIN_CFG(30, ALT_C)
+
+#define GPIO31_GPIO		PIN_CFG(31, GPIO)
+#define GPIO31_MC0_DAT6		PIN_CFG(31, ALT_A)
+#define GPIO31_SPI3_FRM		PIN_CFG(31, ALT_B)
+#define GPIO31_U2_CTSn		PIN_CFG(31, ALT_C)
+
+#define GPIO32_GPIO		PIN_CFG(32, GPIO)
+#define GPIO32_MC0_DAT7		PIN_CFG(32, ALT_A)
+#define GPIO32_SPI3_TXD		PIN_CFG(32, ALT_B)
+#define GPIO32_U2_RTSn		PIN_CFG(32, ALT_C)
+
+#define GPIO33_GPIO		PIN_CFG(33, GPIO)
+#define GPIO33_MSP1_TXD		PIN_CFG(33, ALT_A)
+#define GPIO33_MSP1_RXD		PIN_CFG(33, ALT_B)
+#define GPIO33_U0_DTRn		PIN_CFG(33, ALT_C)
+
+#define GPIO34_GPIO		PIN_CFG(34, GPIO)
+#define GPIO34_MSP1_TFS		PIN_CFG(34, ALT_A)
+#define GPIO34_NONE		PIN_CFG(34, ALT_B)
+#define GPIO34_U0_DCDn		PIN_CFG(34, ALT_C)
+
+#define GPIO35_GPIO		PIN_CFG(35, GPIO)
+#define GPIO35_MSP1_TCK		PIN_CFG(35, ALT_A)
+#define GPIO35_NONE		PIN_CFG(35, ALT_B)
+#define GPIO35_U0_DSRn		PIN_CFG(35, ALT_C)
+
+#define GPIO36_GPIO		PIN_CFG(36, GPIO)
+#define GPIO36_MSP1_RXD		PIN_CFG(36, ALT_A)
+#define GPIO36_MSP1_TXD		PIN_CFG(36, ALT_B)
+#define GPIO36_U0_RIn		PIN_CFG(36, ALT_C)
+
+#define GPIO64_GPIO		PIN_CFG(64, GPIO)
+#define GPIO64_LCDB_DE		PIN_CFG(64, ALT_A)
+#define GPIO64_KP_O1		PIN_CFG(64, ALT_B)
+#define GPIO64_IP_GPIO4		PIN_CFG(64, ALT_C)
+
+#define GPIO65_GPIO		PIN_CFG(65, GPIO)
+#define GPIO65_LCDB_HSO		PIN_CFG(65, ALT_A)
+#define GPIO65_KP_O0		PIN_CFG(65, ALT_B)
+#define GPIO65_IP_GPIO5		PIN_CFG(65, ALT_C)
+
+#define GPIO66_GPIO		PIN_CFG(66, GPIO)
+#define GPIO66_LCDB_VSO		PIN_CFG(66, ALT_A)
+#define GPIO66_KP_I1		PIN_CFG(66, ALT_B)
+#define GPIO66_IP_GPIO6		PIN_CFG(66, ALT_C)
+
+#define GPIO67_GPIO		PIN_CFG(67, GPIO)
+#define GPIO67_LCDB_CLK		PIN_CFG(67, ALT_A)
+#define GPIO67_KP_I0		PIN_CFG(67, ALT_B)
+#define GPIO67_IP_GPIO7		PIN_CFG(67, ALT_C)
+
+#define GPIO68_GPIO		PIN_CFG(68, GPIO)
+#define GPIO68_LCD_VSI0		PIN_CFG(68, ALT_A)
+#define GPIO68_KP_O7		PIN_CFG(68, ALT_B)
+#define GPIO68_SM_CLE		PIN_CFG(68, ALT_C)
+
+#define GPIO69_GPIO		PIN_CFG(69, GPIO)
+#define GPIO69_LCD_VSI1		PIN_CFG(69, ALT_A)
+#define GPIO69_KP_I7		PIN_CFG(69, ALT_B)
+#define GPIO69_SM_ALE		PIN_CFG(69, ALT_C)
+
+#define GPIO70_GPIO		PIN_CFG(70, GPIO)
+#define GPIO70_LCD_D0		PIN_CFG(70, ALT_A)
+#define GPIO70_KP_O5		PIN_CFG(70, ALT_B)
+#define GPIO70_STMAPE_CLK	PIN_CFG(70, ALT_C)
+
+#define GPIO71_GPIO		PIN_CFG(71, GPIO)
+#define GPIO71_LCD_D1		PIN_CFG(71, ALT_A)
+#define GPIO71_KP_O4		PIN_CFG(71, ALT_B)
+#define GPIO71_STMAPE_DAT3	PIN_CFG(71, ALT_C)
+
+#define GPIO72_GPIO		PIN_CFG(72, GPIO)
+#define GPIO72_LCD_D2		PIN_CFG(72, ALT_A)
+#define GPIO72_KP_O3		PIN_CFG(72, ALT_B)
+#define GPIO72_STMAPE_DAT2	PIN_CFG(72, ALT_C)
+
+#define GPIO73_GPIO		PIN_CFG(73, GPIO)
+#define GPIO73_LCD_D3		PIN_CFG(73, ALT_A)
+#define GPIO73_KP_O2		PIN_CFG(73, ALT_B)
+#define GPIO73_STMAPE_DAT1	PIN_CFG(73, ALT_C)
+
+#define GPIO74_GPIO		PIN_CFG(74, GPIO)
+#define GPIO74_LCD_D4		PIN_CFG(74, ALT_A)
+#define GPIO74_KP_I5		PIN_CFG(74, ALT_B)
+#define GPIO74_STMAPE_DAT0	PIN_CFG(74, ALT_C)
+
+#define GPIO75_GPIO		PIN_CFG(75, GPIO)
+#define GPIO75_LCD_D5		PIN_CFG(75, ALT_A)
+#define GPIO75_KP_I4		PIN_CFG(75, ALT_B)
+#define GPIO75_U2_RXD		PIN_CFG(75, ALT_C)
+
+#define GPIO76_GPIO		PIN_CFG(76, GPIO)
+#define GPIO76_LCD_D6		PIN_CFG(76, ALT_A)
+#define GPIO76_KP_I3		PIN_CFG(76, ALT_B)
+#define GPIO76_U2_TXD		PIN_CFG(76, ALT_C)
+
+#define GPIO77_GPIO		PIN_CFG(77, GPIO)
+#define GPIO77_LCD_D7		PIN_CFG(77, ALT_A)
+#define GPIO77_KP_I2		PIN_CFG(77, ALT_B)
+#define GPIO77_NONE		PIN_CFG(77, ALT_C)
+
+#define GPIO78_GPIO		PIN_CFG(78, GPIO)
+#define GPIO78_LCD_D8		PIN_CFG(78, ALT_A)
+#define GPIO78_KP_O6		PIN_CFG(78, ALT_B)
+#define GPIO78_IP_GPIO2		PIN_CFG(78, ALT_C)
+
+#define GPIO79_GPIO		PIN_CFG(79, GPIO)
+#define GPIO79_LCD_D9		PIN_CFG(79, ALT_A)
+#define GPIO79_KP_I6		PIN_CFG(79, ALT_B)
+#define GPIO79_IP_GPIO3		PIN_CFG(79, ALT_C)
+
+#define GPIO80_GPIO		PIN_CFG(80, GPIO)
+#define GPIO80_LCD_D10		PIN_CFG(80, ALT_A)
+#define GPIO80_KP_SKA0		PIN_CFG(80, ALT_B)
+#define GPIO80_IP_GPIO4		PIN_CFG(80, ALT_C)
+
+#define GPIO81_GPIO		PIN_CFG(81, GPIO)
+#define GPIO81_LCD_D11		PIN_CFG(81, ALT_A)
+#define GPIO81_KP_SKB0		PIN_CFG(81, ALT_B)
+#define GPIO81_IP_GPIO5		PIN_CFG(81, ALT_C)
+
+#define GPIO82_GPIO		PIN_CFG(82, GPIO)
+#define GPIO82_LCD_D12		PIN_CFG(82, ALT_A)
+#define GPIO82_KP_O5		PIN_CFG(82, ALT_B)
+
+#define GPIO83_GPIO		PIN_CFG(83, GPIO)
+#define GPIO83_LCD_D13		PIN_CFG(83, ALT_A)
+#define GPIO83_KP_O4		PIN_CFG(83, ALT_B)
+
+#define GPIO84_GPIO		PIN_CFG(84, GPIO)
+#define GPIO84_LCD_D14		PIN_CFG(84, ALT_A)
+#define GPIO84_KP_I5		PIN_CFG(84, ALT_B)
+
+#define GPIO85_GPIO		PIN_CFG(85, GPIO)
+#define GPIO85_LCD_D15		PIN_CFG(85, ALT_A)
+#define GPIO85_KP_I4		PIN_CFG(85, ALT_B)
+
+#define GPIO86_GPIO		PIN_CFG(86, GPIO)
+#define GPIO86_LCD_D16		PIN_CFG(86, ALT_A)
+#define GPIO86_SM_ADQ0		PIN_CFG(86, ALT_B)
+#define GPIO86_MC5_DAT0		PIN_CFG(86, ALT_C)
+
+#define GPIO87_GPIO		PIN_CFG(87, GPIO)
+#define GPIO87_LCD_D17		PIN_CFG(87, ALT_A)
+#define GPIO87_SM_ADQ1		PIN_CFG(87, ALT_B)
+#define GPIO87_MC5_DAT1		PIN_CFG(87, ALT_C)
+
+#define GPIO88_GPIO		PIN_CFG(88, GPIO)
+#define GPIO88_LCD_D18		PIN_CFG(88, ALT_A)
+#define GPIO88_SM_ADQ2		PIN_CFG(88, ALT_B)
+#define GPIO88_MC5_DAT2		PIN_CFG(88, ALT_C)
+
+#define GPIO89_GPIO		PIN_CFG(89, GPIO)
+#define GPIO89_LCD_D19		PIN_CFG(89, ALT_A)
+#define GPIO89_SM_ADQ3		PIN_CFG(89, ALT_B)
+#define GPIO89_MC5_DAT3		PIN_CFG(89, ALT_C)
+
+#define GPIO90_GPIO		PIN_CFG(90, GPIO)
+#define GPIO90_LCD_D20		PIN_CFG(90, ALT_A)
+#define GPIO90_SM_ADQ4		PIN_CFG(90, ALT_B)
+#define GPIO90_MC5_CMD		PIN_CFG(90, ALT_C)
+
+#define GPIO91_GPIO		PIN_CFG(91, GPIO)
+#define GPIO91_LCD_D21		PIN_CFG(91, ALT_A)
+#define GPIO91_SM_ADQ5		PIN_CFG(91, ALT_B)
+#define GPIO91_MC5_FBCLK	PIN_CFG(91, ALT_C)
+
+#define GPIO92_GPIO		PIN_CFG(92, GPIO)
+#define GPIO92_LCD_D22		PIN_CFG(92, ALT_A)
+#define GPIO92_SM_ADQ6		PIN_CFG(92, ALT_B)
+#define GPIO92_MC5_CLK		PIN_CFG(92, ALT_C)
+
+#define GPIO93_GPIO		PIN_CFG(93, GPIO)
+#define GPIO93_LCD_D23		PIN_CFG(93, ALT_A)
+#define GPIO93_SM_ADQ7		PIN_CFG(93, ALT_B)
+#define GPIO93_MC5_DAT4		PIN_CFG(93, ALT_C)
+
+#define GPIO94_GPIO		PIN_CFG(94, GPIO)
+#define GPIO94_KP_O7		PIN_CFG(94, ALT_A)
+#define GPIO94_SM_ADVn		PIN_CFG(94, ALT_B)
+#define GPIO94_MC5_DAT5		PIN_CFG(94, ALT_C)
+
+#define GPIO95_GPIO		PIN_CFG(95, GPIO)
+#define GPIO95_KP_I7		PIN_CFG(95, ALT_A)
+#define GPIO95_SM_CS0n		PIN_CFG(95, ALT_B)
+#define GPIO95_SM_PS0n		PIN_CFG(95, ALT_C)
+
+#define GPIO96_GPIO		PIN_CFG(96, GPIO)
+#define GPIO96_KP_O6		PIN_CFG(96, ALT_A)
+#define GPIO96_SM_OEn		PIN_CFG(96, ALT_B)
+#define GPIO96_MC5_DAT6		PIN_CFG(96, ALT_C)
+
+#define GPIO97_GPIO		PIN_CFG(97, GPIO)
+#define GPIO97_KP_I6		PIN_CFG(97, ALT_A)
+#define GPIO97_SM_WEn		PIN_CFG(97, ALT_B)
+#define GPIO97_MC5_DAT7		PIN_CFG(97, ALT_C)
+
+#define GPIO128_GPIO		PIN_CFG(128, GPIO)
+#define GPIO128_MC2_CLK		PIN_CFG_PULL(128, ALT_A, UP)
+#define GPIO128_SM_CKO		PIN_CFG(128, ALT_B)
+
+#define GPIO129_GPIO		PIN_CFG(129, GPIO)
+#define GPIO129_MC2_CMD		PIN_CFG_PULL(129, ALT_A, UP)
+#define GPIO129_SM_WAIT0n	PIN_CFG(129, ALT_B)
+
+#define GPIO130_GPIO		PIN_CFG(130, GPIO)
+#define GPIO130_MC2_FBCLK	PIN_CFG_PULL(130, ALT_A, UP)
+#define GPIO130_SM_FBCLK	PIN_CFG(130, ALT_B)
+#define GPIO130_MC2_RSTN	PIN_CFG(130, ALT_C)
+
+#define GPIO131_GPIO		PIN_CFG(131, GPIO)
+#define GPIO131_MC2_DAT0	PIN_CFG_PULL(131, ALT_A, UP)
+#define GPIO131_SM_ADQ8		PIN_CFG(131, ALT_B)
+
+#define GPIO132_GPIO		PIN_CFG(132, GPIO)
+#define GPIO132_MC2_DAT1	PIN_CFG_PULL(132, ALT_A, UP)
+#define GPIO132_SM_ADQ9		PIN_CFG(132, ALT_B)
+
+#define GPIO133_GPIO		PIN_CFG(133, GPIO)
+#define GPIO133_MC2_DAT2	PIN_CFG_PULL(133, ALT_A, UP)
+#define GPIO133_SM_ADQ10	PIN_CFG(133, ALT_B)
+
+#define GPIO134_GPIO		PIN_CFG(134, GPIO)
+#define GPIO134_MC2_DAT3	PIN_CFG_PULL(134, ALT_A, UP)
+#define GPIO134_SM_ADQ11	PIN_CFG(134, ALT_B)
+
+#define GPIO135_GPIO		PIN_CFG(135, GPIO)
+#define GPIO135_MC2_DAT4	PIN_CFG_PULL(135, ALT_A, UP)
+#define GPIO135_SM_ADQ12	PIN_CFG(135, ALT_B)
+
+#define GPIO136_GPIO		PIN_CFG(136, GPIO)
+#define GPIO136_MC2_DAT5	PIN_CFG_PULL(136, ALT_A, UP)
+#define GPIO136_SM_ADQ13	PIN_CFG(136, ALT_B)
+
+#define GPIO137_GPIO		PIN_CFG(137, GPIO)
+#define GPIO137_MC2_DAT6	PIN_CFG_PULL(137, ALT_A, UP)
+#define GPIO137_SM_ADQ14	PIN_CFG(137, ALT_B)
+
+#define GPIO138_GPIO		PIN_CFG(138, GPIO)
+#define GPIO138_MC2_DAT7	PIN_CFG_PULL(138, ALT_A, UP)
+#define GPIO138_SM_ADQ15	PIN_CFG(138, ALT_B)
+
+#define GPIO139_GPIO		PIN_CFG(139, GPIO)
+#define GPIO139_SSP1_RXD	PIN_CFG(139, ALT_A)
+#define GPIO139_SM_WAIT1n	PIN_CFG(139, ALT_B)
+#define GPIO139_KP_O8		PIN_CFG(139, ALT_C)
+
+#define GPIO140_GPIO		PIN_CFG(140, GPIO)
+#define GPIO140_SSP1_TXD	PIN_CFG(140, ALT_A)
+#define GPIO140_IP_GPIO7	PIN_CFG(140, ALT_B)
+#define GPIO140_KP_SKA1		PIN_CFG(140, ALT_C)
+
+#define GPIO141_GPIO		PIN_CFG(141, GPIO)
+#define GPIO141_SSP1_CLK	PIN_CFG(141, ALT_A)
+#define GPIO141_IP_GPIO2	PIN_CFG(141, ALT_B)
+#define GPIO141_KP_O9		PIN_CFG(141, ALT_C)
+
+#define GPIO142_GPIO		PIN_CFG(142, GPIO)
+#define GPIO142_SSP1_FRM	PIN_CFG(142, ALT_A)
+#define GPIO142_IP_GPIO3	PIN_CFG(142, ALT_B)
+#define GPIO142_KP_SKB1		PIN_CFG(142, ALT_C)
+
+#define GPIO143_GPIO		PIN_CFG(143, GPIO)
+#define GPIO143_SSP0_CLK	PIN_CFG(143, ALT_A)
+
+#define GPIO144_GPIO		PIN_CFG(144, GPIO)
+#define GPIO144_SSP0_FRM	PIN_CFG(144, ALT_A)
+
+#define GPIO145_GPIO		PIN_CFG(145, GPIO)
+#define GPIO145_SSP0_RXD	PIN_CFG(145, ALT_A)
+
+#define GPIO146_GPIO		PIN_CFG(146, GPIO)
+#define GPIO146_SSP0_TXD	PIN_CFG(146, ALT_A)
+
+#define GPIO147_GPIO		PIN_CFG(147, GPIO)
+#define GPIO147_I2C0_SCL	PIN_CFG_PULL(147, ALT_A, UP)
+
+#define GPIO148_GPIO		PIN_CFG(148, GPIO)
+#define GPIO148_I2C0_SDA	PIN_CFG_PULL(148, ALT_A, UP)
+
+#define GPIO149_GPIO		PIN_CFG(149, GPIO)
+#define GPIO149_IP_GPIO0	PIN_CFG(149, ALT_A)
+#define GPIO149_SM_CS1n		PIN_CFG(149, ALT_B)
+#define GPIO149_SM_PS1n		PIN_CFG(149, ALT_C)
+
+#define GPIO150_GPIO		PIN_CFG(150, GPIO)
+#define GPIO150_IP_GPIO1	PIN_CFG(150, ALT_A)
+#define GPIO150_LCDA_CLK	PIN_CFG(150, ALT_B)
+
+#define GPIO151_GPIO		PIN_CFG(151, GPIO)
+#define GPIO151_KP_SKA0		PIN_CFG(151, ALT_A)
+#define GPIO151_LCD_VSI0	PIN_CFG(151, ALT_B)
+#define GPIO151_KP_O8		PIN_CFG(151, ALT_C)
+
+#define GPIO152_GPIO		PIN_CFG(152, GPIO)
+#define GPIO152_KP_SKB0		PIN_CFG(152, ALT_A)
+#define GPIO152_LCD_VSI1	PIN_CFG(152, ALT_B)
+#define GPIO152_KP_O9		PIN_CFG(152, ALT_C)
+
+#define GPIO153_GPIO		PIN_CFG(153, GPIO)
+#define GPIO153_KP_I7		PIN_CFG_PULL(153, ALT_A, DOWN)
+#define GPIO153_LCD_D24		PIN_CFG(153, ALT_B)
+#define GPIO153_U2_RXD		PIN_CFG(153, ALT_C)
+
+#define GPIO154_GPIO		PIN_CFG(154, GPIO)
+#define GPIO154_KP_I6		PIN_CFG_PULL(154, ALT_A, DOWN)
+#define GPIO154_LCD_D25		PIN_CFG(154, ALT_B)
+#define GPIO154_U2_TXD		PIN_CFG(154, ALT_C)
+
+#define GPIO155_GPIO		PIN_CFG(155, GPIO)
+#define GPIO155_KP_I5		PIN_CFG_PULL(155, ALT_A, DOWN)
+#define GPIO155_LCD_D26		PIN_CFG(155, ALT_B)
+#define GPIO155_STMAPE_CLK	PIN_CFG(155, ALT_C)
+
+#define GPIO156_GPIO		PIN_CFG(156, GPIO)
+#define GPIO156_KP_I4		PIN_CFG_PULL(156, ALT_A, DOWN)
+#define GPIO156_LCD_D27		PIN_CFG(156, ALT_B)
+#define GPIO156_STMAPE_DAT3	PIN_CFG(156, ALT_C)
+
+#define GPIO157_GPIO		PIN_CFG(157, GPIO)
+#define GPIO157_KP_O7		PIN_CFG_PULL(157, ALT_A, UP)
+#define GPIO157_LCD_D28		PIN_CFG(157, ALT_B)
+#define GPIO157_STMAPE_DAT2	PIN_CFG(157, ALT_C)
+
+#define GPIO158_GPIO		PIN_CFG(158, GPIO)
+#define GPIO158_KP_O6		PIN_CFG_PULL(158, ALT_A, UP)
+#define GPIO158_LCD_D29		PIN_CFG(158, ALT_B)
+#define GPIO158_STMAPE_DAT1	PIN_CFG(158, ALT_C)
+
+#define GPIO159_GPIO		PIN_CFG(159, GPIO)
+#define GPIO159_KP_O5		PIN_CFG_PULL(159, ALT_A, UP)
+#define GPIO159_LCD_D30		PIN_CFG(159, ALT_B)
+#define GPIO159_STMAPE_DAT0	PIN_CFG(159, ALT_C)
+
+#define GPIO160_GPIO		PIN_CFG(160, GPIO)
+#define GPIO160_KP_O4		PIN_CFG_PULL(160, ALT_A, UP)
+#define GPIO160_LCD_D31		PIN_CFG(160, ALT_B)
+#define GPIO160_NONE		PIN_CFG(160, ALT_C)
+
+#define GPIO161_GPIO		PIN_CFG(161, GPIO)
+#define GPIO161_KP_I3		PIN_CFG_PULL(161, ALT_A, DOWN)
+#define GPIO161_LCD_D32		PIN_CFG(161, ALT_B)
+#define GPIO161_UARTMOD_RXD	PIN_CFG(161, ALT_C)
+
+#define GPIO162_GPIO		PIN_CFG(162, GPIO)
+#define GPIO162_KP_I2		PIN_CFG_PULL(162, ALT_A, DOWN)
+#define GPIO162_LCD_D33		PIN_CFG(162, ALT_B)
+#define GPIO162_UARTMOD_TXD	PIN_CFG(162, ALT_C)
+
+#define GPIO163_GPIO		PIN_CFG(163, GPIO)
+#define GPIO163_KP_I1		PIN_CFG_PULL(163, ALT_A, DOWN)
+#define GPIO163_LCD_D34		PIN_CFG(163, ALT_B)
+#define GPIO163_STMMOD_CLK	PIN_CFG(163, ALT_C)
+
+#define GPIO164_GPIO		PIN_CFG(164, GPIO)
+#define GPIO164_KP_I0		PIN_CFG_PULL(164, ALT_A, UP)
+#define GPIO164_LCD_D35		PIN_CFG(164, ALT_B)
+#define GPIO164_STMMOD_DAT3	PIN_CFG(164, ALT_C)
+
+#define GPIO165_GPIO		PIN_CFG(165, GPIO)
+#define GPIO165_KP_O3		PIN_CFG_PULL(165, ALT_A, UP)
+#define GPIO165_LCD_D36		PIN_CFG(165, ALT_B)
+#define GPIO165_STMMOD_DAT2	PIN_CFG(165, ALT_C)
+
+#define GPIO166_GPIO		PIN_CFG(166, GPIO)
+#define GPIO166_KP_O2		PIN_CFG_PULL(166, ALT_A, UP)
+#define GPIO166_LCD_D37		PIN_CFG(166, ALT_B)
+#define GPIO166_STMMOD_DAT1	PIN_CFG(166, ALT_C)
+
+#define GPIO167_GPIO		PIN_CFG(167, GPIO)
+#define GPIO167_KP_O1		PIN_CFG_PULL(167, ALT_A, UP)
+#define GPIO167_LCD_D38		PIN_CFG(167, ALT_B)
+#define GPIO167_STMMOD_DAT0	PIN_CFG(167, ALT_C)
+
+#define GPIO168_GPIO		PIN_CFG(168, GPIO)
+#define GPIO168_KP_O0		PIN_CFG_PULL(168, ALT_A, UP)
+#define GPIO168_LCD_D39		PIN_CFG(168, ALT_B)
+#define GPIO168_NONE		PIN_CFG(168, ALT_C)
+
+#define GPIO169_GPIO		PIN_CFG(169, GPIO)
+#define GPIO169_RF_PURn		PIN_CFG(169, ALT_A)
+#define GPIO169_LCDA_DE		PIN_CFG(169, ALT_B)
+#define GPIO169_USBSIM_PDC	PIN_CFG(169, ALT_C)
+
+#define GPIO170_GPIO		PIN_CFG(170, GPIO)
+#define GPIO170_MODEM_STATE	PIN_CFG(170, ALT_A)
+#define GPIO170_LCDA_VSO	PIN_CFG(170, ALT_B)
+#define GPIO170_KP_SKA1		PIN_CFG(170, ALT_C)
+
+#define GPIO171_GPIO		PIN_CFG(171, GPIO)
+#define GPIO171_MODEM_PWREN	PIN_CFG(171, ALT_A)
+#define GPIO171_LCDA_HSO	PIN_CFG(171, ALT_B)
+#define GPIO171_KP_SKB1		PIN_CFG(171, ALT_C)
+
+#define GPIO192_GPIO		PIN_CFG(192, GPIO)
+#define GPIO192_MSP2_SCK	PIN_CFG(192, ALT_A)
+
+#define GPIO193_GPIO		PIN_CFG(193, GPIO)
+#define GPIO193_MSP2_TXD	PIN_CFG(193, ALT_A)
+
+#define GPIO194_GPIO		PIN_CFG(194, GPIO)
+#define GPIO194_MSP2_TCK	PIN_CFG(194, ALT_A)
+
+#define GPIO195_GPIO		PIN_CFG(195, GPIO)
+#define GPIO195_MSP2_TFS	PIN_CFG(195, ALT_A)
+
+#define GPIO196_GPIO		PIN_CFG(196, GPIO)
+#define GPIO196_MSP2_RXD	PIN_CFG(196, ALT_A)
+
+#define GPIO197_GPIO		PIN_CFG(197, GPIO)
+#define GPIO197_MC4_DAT3	PIN_CFG_PULL(197, ALT_A, UP)
+
+#define GPIO198_GPIO		PIN_CFG(198, GPIO)
+#define GPIO198_MC4_DAT2	PIN_CFG_PULL(198, ALT_A, UP)
+
+#define GPIO199_GPIO		PIN_CFG(199, GPIO)
+#define GPIO199_MC4_DAT1	PIN_CFG_PULL(199, ALT_A, UP)
+
+#define GPIO200_GPIO		PIN_CFG(200, GPIO)
+#define GPIO200_MC4_DAT0	PIN_CFG_PULL(200, ALT_A, UP)
+
+#define GPIO201_GPIO		PIN_CFG(201, GPIO)
+#define GPIO201_MC4_CMD		PIN_CFG_PULL(201, ALT_A, UP)
+
+#define GPIO202_GPIO		PIN_CFG(202, GPIO)
+#define GPIO202_MC4_FBCLK	PIN_CFG_PULL(202, ALT_A, UP)
+#define GPIO202_PWL		PIN_CFG(202, ALT_B)
+#define GPIO202_MC4_RSTN	PIN_CFG(202, ALT_C)
+
+#define GPIO203_GPIO		PIN_CFG(203, GPIO)
+#define GPIO203_MC4_CLK		PIN_CFG_PULL(203, ALT_A, UP)
+
+#define GPIO204_GPIO		PIN_CFG(204, GPIO)
+#define GPIO204_MC4_DAT7	PIN_CFG_PULL(204, ALT_A, UP)
+
+#define GPIO205_GPIO		PIN_CFG(205, GPIO)
+#define GPIO205_MC4_DAT6	PIN_CFG_PULL(205, ALT_A, UP)
+
+#define GPIO206_GPIO		PIN_CFG(206, GPIO)
+#define GPIO206_MC4_DAT5	PIN_CFG_PULL(206, ALT_A, UP)
+
+#define GPIO207_GPIO		PIN_CFG(207, GPIO)
+#define GPIO207_MC4_DAT4	PIN_CFG_PULL(207, ALT_A, UP)
+
+#define GPIO208_GPIO		PIN_CFG(208, GPIO)
+#define GPIO208_MC1_CLK		PIN_CFG(208, ALT_A)
+
+#define GPIO209_GPIO		PIN_CFG(209, GPIO)
+#define GPIO209_MC1_FBCLK	PIN_CFG(209, ALT_A)
+#define GPIO209_SPI1_CLK	PIN_CFG(209, ALT_B)
+
+#define GPIO210_GPIO		PIN_CFG(210, GPIO)
+#define GPIO210_MC1_CMD		PIN_CFG(210, ALT_A)
+
+#define GPIO211_GPIO		PIN_CFG(211, GPIO)
+#define GPIO211_MC1_DAT0	PIN_CFG(211, ALT_A)
+
+#define GPIO212_GPIO		PIN_CFG(212, GPIO)
+#define GPIO212_MC1_DAT1	PIN_CFG(212, ALT_A)
+#define GPIO212_SPI1_FRM	PIN_CFG(212, ALT_B)
+
+#define GPIO213_GPIO		PIN_CFG(213, GPIO)
+#define GPIO213_MC1_DAT2	PIN_CFG(213, ALT_A)
+#define GPIO213_SPI1_TXD	PIN_CFG(213, ALT_B)
+
+#define GPIO214_GPIO		PIN_CFG(214, GPIO)
+#define GPIO214_MC1_DAT3	PIN_CFG(214, ALT_A)
+#define GPIO214_SPI1_RXD	PIN_CFG(214, ALT_B)
+
+#define GPIO215_GPIO		PIN_CFG(215, GPIO)
+#define GPIO215_MC1_CMDDIR	PIN_CFG(215, ALT_A)
+#define GPIO215_MC3_DAT2DIR	PIN_CFG(215, ALT_B)
+#define GPIO215_CLKOUT1		PIN_CFG(215, ALT_C)
+
+#define GPIO216_GPIO		PIN_CFG(216, GPIO)
+#define GPIO216_MC1_DAT2DIR	PIN_CFG(216, ALT_A)
+#define GPIO216_MC3_CMDDIR	PIN_CFG(216, ALT_B)
+#define GPIO216_I2C3_SDA	PIN_CFG_PULL(216, ALT_C, UP)
+
+#define GPIO217_GPIO		PIN_CFG(217, GPIO)
+#define GPIO217_MC1_DAT0DIR	PIN_CFG(217, ALT_A)
+#define GPIO217_MC3_DAT31DIR	PIN_CFG(217, ALT_B)
+#define GPIO217_CLKOUT2		PIN_CFG(217, ALT_C)
+
+#define GPIO218_GPIO		PIN_CFG(218, GPIO)
+#define GPIO218_MC1_DAT31DIR	PIN_CFG(218, ALT_A)
+#define GPIO218_MC3_DAT0DIR	PIN_CFG(218, ALT_B)
+#define GPIO218_I2C3_SCL	PIN_CFG_PULL(218, ALT_C, UP)
+
+#define GPIO219_GPIO		PIN_CFG(219, GPIO)
+#define GPIO219_HSIR_FLA0	PIN_CFG(219, ALT_A)
+#define GPIO219_MC3_CLK		PIN_CFG(219, ALT_B)
+
+#define GPIO220_GPIO		PIN_CFG(220, GPIO)
+#define GPIO220_HSIR_DAT0	PIN_CFG(220, ALT_A)
+#define GPIO220_MC3_FBCLK	PIN_CFG(220, ALT_B)
+#define GPIO220_SPI0_CLK	PIN_CFG(220, ALT_C)
+
+#define GPIO221_GPIO		PIN_CFG(221, GPIO)
+#define GPIO221_HSIR_RDY0	PIN_CFG(221, ALT_A)
+#define GPIO221_MC3_CMD		PIN_CFG(221, ALT_B)
+
+#define GPIO222_GPIO		PIN_CFG(222, GPIO)
+#define GPIO222_HSIT_FLA0	PIN_CFG(222, ALT_A)
+#define GPIO222_MC3_DAT0	PIN_CFG(222, ALT_B)
+
+#define GPIO223_GPIO		PIN_CFG(223, GPIO)
+#define GPIO223_HSIT_DAT0	PIN_CFG(223, ALT_A)
+#define GPIO223_MC3_DAT1	PIN_CFG(223, ALT_B)
+#define GPIO223_SPI0_FRM	PIN_CFG(223, ALT_C)
+
+#define GPIO224_GPIO		PIN_CFG(224, GPIO)
+#define GPIO224_HSIT_RDY0	PIN_CFG(224, ALT_A)
+#define GPIO224_MC3_DAT2	PIN_CFG(224, ALT_B)
+#define GPIO224_SPI0_TXD	PIN_CFG(224, ALT_C)
+
+#define GPIO225_GPIO		PIN_CFG(225, GPIO)
+#define GPIO225_HSIT_CAWAKE0	PIN_CFG(225, ALT_A)
+#define GPIO225_MC3_DAT3	PIN_CFG(225, ALT_B)
+#define GPIO225_SPI0_RXD	PIN_CFG(225, ALT_C)
+
+#define GPIO226_GPIO		PIN_CFG(226, GPIO)
+#define GPIO226_HSIT_ACWAKE0	PIN_CFG(226, ALT_A)
+#define GPIO226_PWL		PIN_CFG(226, ALT_B)
+#define GPIO226_USBSIM_PDC	PIN_CFG(226, ALT_C)
+
+#define GPIO227_GPIO		PIN_CFG(227, GPIO)
+#define GPIO227_CLKOUT1		PIN_CFG(227, ALT_A)
+
+#define GPIO228_GPIO		PIN_CFG(228, GPIO)
+#define GPIO228_CLKOUT2		PIN_CFG(228, ALT_A)
+
+#define GPIO229_GPIO		PIN_CFG(229, GPIO)
+#define GPIO229_CLKOUT1		PIN_CFG(229, ALT_A)
+#define GPIO229_PWL		PIN_CFG(229, ALT_B)
+#define GPIO229_I2C3_SDA	PIN_CFG_PULL(229, ALT_C, UP)
+
+#define GPIO230_GPIO		PIN_CFG(230, GPIO)
+#define GPIO230_CLKOUT2		PIN_CFG(230, ALT_A)
+#define GPIO230_PWL		PIN_CFG(230, ALT_B)
+#define GPIO230_I2C3_SCL	PIN_CFG_PULL(230, ALT_C, UP)
+
+#define GPIO256_GPIO		PIN_CFG(256, GPIO)
+#define GPIO256_USB_NXT		PIN_CFG(256, ALT_A)
+
+#define GPIO257_GPIO		PIN_CFG(257, GPIO)
+#define GPIO257_USB_STP		PIN_CFG(257, ALT_A)
+
+#define GPIO258_GPIO		PIN_CFG(258, GPIO)
+#define GPIO258_USB_XCLK	PIN_CFG(258, ALT_A)
+#define GPIO258_NONE		PIN_CFG(258, ALT_B)
+#define GPIO258_DDR_TRIG	PIN_CFG(258, ALT_C)
+
+#define GPIO259_GPIO		PIN_CFG(259, GPIO)
+#define GPIO259_USB_DIR		PIN_CFG(259, ALT_A)
+
+#define GPIO260_GPIO		PIN_CFG(260, GPIO)
+#define GPIO260_USB_DAT7	PIN_CFG(260, ALT_A)
+
+#define GPIO261_GPIO		PIN_CFG(261, GPIO)
+#define GPIO261_USB_DAT6	PIN_CFG(261, ALT_A)
+
+#define GPIO262_GPIO		PIN_CFG(262, GPIO)
+#define GPIO262_USB_DAT5	PIN_CFG(262, ALT_A)
+
+#define GPIO263_GPIO		PIN_CFG(263, GPIO)
+#define GPIO263_USB_DAT4	PIN_CFG(263, ALT_A)
+
+#define GPIO264_GPIO		PIN_CFG(264, GPIO)
+#define GPIO264_USB_DAT3	PIN_CFG(264, ALT_A)
+
+#define GPIO265_GPIO		PIN_CFG(265, GPIO)
+#define GPIO265_USB_DAT2	PIN_CFG(265, ALT_A)
+
+#define GPIO266_GPIO		PIN_CFG(266, GPIO)
+#define GPIO266_USB_DAT1	PIN_CFG(266, ALT_A)
+
+#define GPIO267_GPIO		PIN_CFG(267, GPIO)
+#define GPIO267_USB_DAT0	PIN_CFG(267, ALT_A)
+
+#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 438ef16aec90..9e4c678de785 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -78,6 +78,8 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
 	outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1);
 
+	smp_cross_call(cpumask_of(cpu));
+
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
 		if (pen_release == -1)
diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c
new file mode 100644
index 000000000000..293274d1342a
--- /dev/null
+++ b/arch/arm/mach-ux500/prcmu.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) ST Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ *
+ * U8500 PRCMU driver.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+
+#include <mach/hardware.h>
+#include <mach/prcmu-regs.h>
+
+#define PRCMU_TCDM_BASE __io_address(U8500_PRCMU_TCDM_BASE)
+
+#define REQ_MB5 (PRCMU_TCDM_BASE + 0xE44)
+#define ACK_MB5 (PRCMU_TCDM_BASE + 0xDF4)
+
+#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5)
+#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1)
+#define REQ_MB5_I2C_REG (REQ_MB5 + 2)
+#define REQ_MB5_I2C_VAL (REQ_MB5 + 3)
+
+#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1)
+#define ACK_MB5_I2C_VAL (ACK_MB5 + 3)
+
+#define I2C_WRITE(slave) ((slave) << 1)
+#define I2C_READ(slave) (((slave) << 1) | BIT(0))
+#define I2C_STOP_EN BIT(3)
+
+enum ack_mb5_status {
+	I2C_WR_OK = 0x01,
+	I2C_RD_OK = 0x02,
+};
+
+#define MBOX_BIT BIT
+#define NUM_MBOX 8
+
+static struct {
+	struct mutex lock;
+	struct completion work;
+	bool failed;
+	struct {
+		u8 status;
+		u8 value;
+	} ack;
+} mb5_transfer;
+
+/**
+ * prcmu_abb_read() - Read register value(s) from the ABB.
+ * @slave:	The I2C slave address.
+ * @reg:	The (start) register address.
+ * @value:	The read out value(s).
+ * @size:	The number of registers to read.
+ *
+ * Reads register value(s) from the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	int r;
+
+	if (size != 1)
+		return -EINVAL;
+
+	r = mutex_lock_interruptible(&mb5_transfer.lock);
+	if (r)
+		return r;
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+		cpu_relax();
+
+	writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP);
+	writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
+	writeb(reg, REQ_MB5_I2C_REG);
+
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
+	if (!wait_for_completion_timeout(&mb5_transfer.work,
+			msecs_to_jiffies(500))) {
+		pr_err("prcmu: prcmu_abb_read timed out.\n");
+		r = -EIO;
+		goto unlock_and_return;
+	}
+	r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
+	if (!r)
+		*value = mb5_transfer.ack.value;
+
+unlock_and_return:
+	mutex_unlock(&mb5_transfer.lock);
+	return r;
+}
+EXPORT_SYMBOL(prcmu_abb_read);
+
+/**
+ * prcmu_abb_write() - Write register value(s) to the ABB.
+ * @slave:	The I2C slave address.
+ * @reg:	The (start) register address.
+ * @value:	The value(s) to write.
+ * @size:	The number of registers to write.
+ *
+ * Reads register value(s) from the ABB.
+ * @size has to be 1 for the current firmware version.
+ */
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+	int r;
+
+	if (size != 1)
+		return -EINVAL;
+
+	r = mutex_lock_interruptible(&mb5_transfer.lock);
+	if (r)
+		return r;
+
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+		cpu_relax();
+
+	writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP);
+	writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
+	writeb(reg, REQ_MB5_I2C_REG);
+	writeb(*value, REQ_MB5_I2C_VAL);
+
+	writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
+	if (!wait_for_completion_timeout(&mb5_transfer.work,
+			msecs_to_jiffies(500))) {
+		pr_err("prcmu: prcmu_abb_write timed out.\n");
+		r = -EIO;
+		goto unlock_and_return;
+	}
+	r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
+
+unlock_and_return:
+	mutex_unlock(&mb5_transfer.lock);
+	return r;
+}
+EXPORT_SYMBOL(prcmu_abb_write);
+
+static void read_mailbox_0(void)
+{
+	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_1(void)
+{
+	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_2(void)
+{
+	writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_3(void)
+{
+	writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_4(void)
+{
+	writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_5(void)
+{
+	mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS);
+	mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL);
+	complete(&mb5_transfer.work);
+	writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_6(void)
+{
+	writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
+}
+
+static void read_mailbox_7(void)
+{
+	writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
+}
+
+static void (* const read_mailbox[NUM_MBOX])(void) = {
+	read_mailbox_0,
+	read_mailbox_1,
+	read_mailbox_2,
+	read_mailbox_3,
+	read_mailbox_4,
+	read_mailbox_5,
+	read_mailbox_6,
+	read_mailbox_7
+};
+
+static irqreturn_t prcmu_irq_handler(int irq, void *data)
+{
+	u32 bits;
+	u8 n;
+
+	bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1));
+	if (unlikely(!bits))
+		return IRQ_NONE;
+
+	for (n = 0; bits; n++) {
+		if (bits & MBOX_BIT(n)) {
+			bits -= MBOX_BIT(n);
+			read_mailbox[n]();
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+static int __init prcmu_init(void)
+{
+	mutex_init(&mb5_transfer.lock);
+	init_completion(&mb5_transfer.work);
+
+	/* Clean up the mailbox interrupts after pre-kernel code. */
+	writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR);
+
+	return request_irq(IRQ_PRCMU, prcmu_irq_handler, 0, "prcmu", NULL);
+}
+
+arch_initcall(prcmu_init);
diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h
new file mode 100644
index 000000000000..cb2110c32858
--- /dev/null
+++ b/arch/arm/mach-ux500/ste-dma40-db5500.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * DB5500-SoC-specific configuration for DMA40
+ */
+
+#ifndef STE_DMA40_DB5500_H
+#define STE_DMA40_DB5500_H
+
+#define DB5500_DMA_NR_DEV 64
+
+enum dma_src_dev_type {
+	DB5500_DMA_DEV0_SPI0_RX = 0,
+	DB5500_DMA_DEV1_SPI1_RX = 1,
+	DB5500_DMA_DEV2_SPI2_RX = 2,
+	DB5500_DMA_DEV3_SPI3_RX = 3,
+	DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4,
+	DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5,
+	DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6,
+	DB5500_DMA_DEV7_IRDA_RFS = 7,
+	DB5500_DMA_DEV8_IRDA_FIFO_RX = 8,
+	DB5500_DMA_DEV9_MSP0_RX = 9,
+	DB5500_DMA_DEV10_MSP1_RX = 10,
+	DB5500_DMA_DEV11_MSP2_RX = 11,
+	DB5500_DMA_DEV12_UART0_RX = 12,
+	DB5500_DMA_DEV13_UART1_RX = 13,
+	DB5500_DMA_DEV14_UART2_RX = 14,
+	DB5500_DMA_DEV15_UART3_RX = 15,
+	DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16,
+	DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17,
+	DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18,
+	DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19,
+	DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20,
+	DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21,
+	DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22,
+	DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23,
+	DB5500_DMA_DEV24_SDMMC0_RX = 24,
+	DB5500_DMA_DEV25_SDMMC1_RX = 25,
+	DB5500_DMA_DEV26_SDMMC2_RX = 26,
+	DB5500_DMA_DEV27_SDMMC3_RX = 27,
+	DB5500_DMA_DEV28_SDMMC4_RX = 28,
+	/* 29 - 32 not used */
+	DB5500_DMA_DEV33_SDMMC0_RX = 33,
+	DB5500_DMA_DEV34_SDMMC1_RX = 34,
+	DB5500_DMA_DEV35_SDMMC2_RX = 35,
+	DB5500_DMA_DEV36_SDMMC3_RX = 36,
+	DB5500_DMA_DEV37_SDMMC4_RX = 37,
+	DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38,
+	DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39,
+	DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40,
+	DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41,
+	DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42,
+	DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43,
+	DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44,
+	DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45,
+	/* 46 not used */
+	DB5500_DMA_DEV47_MCDE_RX = 47,
+	DB5500_DMA_DEV48_CRYPTO1_RX = 48,
+	/* 49, 50 not used */
+	DB5500_DMA_DEV49_I2C1_RX = 51,
+	DB5500_DMA_DEV50_I2C3_RX = 52,
+	DB5500_DMA_DEV51_I2C2_RX = 53,
+	/* 54 - 60 not used */
+	DB5500_DMA_DEV61_CRYPTO0_RX = 61,
+	/* 62, 63 not used */
+};
+
+enum dma_dest_dev_type {
+	DB5500_DMA_DEV0_SPI0_TX = 0,
+	DB5500_DMA_DEV1_SPI1_TX = 1,
+	DB5500_DMA_DEV2_SPI2_TX = 2,
+	DB5500_DMA_DEV3_SPI3_TX = 3,
+	DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4,
+	DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5,
+	DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6,
+	DB5500_DMA_DEV7_IRRC_TX = 7,
+	DB5500_DMA_DEV8_IRDA_FIFO_TX = 8,
+	DB5500_DMA_DEV9_MSP0_TX = 9,
+	DB5500_DMA_DEV10_MSP1_TX = 10,
+	DB5500_DMA_DEV11_MSP2_TX = 11,
+	DB5500_DMA_DEV12_UART0_TX = 12,
+	DB5500_DMA_DEV13_UART1_TX = 13,
+	DB5500_DMA_DEV14_UART2_TX = 14,
+	DB5500_DMA_DEV15_UART3_TX = 15,
+	DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16,
+	DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17,
+	DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18,
+	DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19,
+	DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20,
+	DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21,
+	DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22,
+	DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23,
+	DB5500_DMA_DEV24_SDMMC0_TX = 24,
+	DB5500_DMA_DEV25_SDMMC1_TX = 25,
+	DB5500_DMA_DEV26_SDMMC2_TX = 26,
+	DB5500_DMA_DEV27_SDMMC3_TX = 27,
+	DB5500_DMA_DEV28_SDMMC4_TX = 28,
+	/* 29 - 31 not used */
+	DB5500_DMA_DEV32_FSMC_TX = 32,
+	DB5500_DMA_DEV33_SDMMC0_TX = 33,
+	DB5500_DMA_DEV34_SDMMC1_TX = 34,
+	DB5500_DMA_DEV35_SDMMC2_TX = 35,
+	DB5500_DMA_DEV36_SDMMC3_TX = 36,
+	DB5500_DMA_DEV37_SDMMC4_TX = 37,
+	DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38,
+	DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39,
+	DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40,
+	DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41,
+	DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42,
+	DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43,
+	DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44,
+	DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45,
+	/* 46 not used */
+	DB5500_DMA_DEV47_STM_TX = 47,
+	DB5500_DMA_DEV48_CRYPTO1_TX = 48,
+	DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49,
+	DB5500_DMA_DEV50_HASH1_TX = 50,
+	DB5500_DMA_DEV51_I2C1_TX = 51,
+	DB5500_DMA_DEV52_I2C3_TX = 52,
+	DB5500_DMA_DEV53_I2C2_TX = 53,
+	/* 54, 55 not used */
+	DB5500_DMA_MEMCPY_TX_1 = 56,
+	DB5500_DMA_MEMCPY_TX_2 = 57,
+	DB5500_DMA_MEMCPY_TX_3 = 58,
+	DB5500_DMA_MEMCPY_TX_4 = 59,
+	DB5500_DMA_MEMCPY_TX_5 = 60,
+	DB5500_DMA_DEV61_CRYPTO0_TX = 61,
+	DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62,
+	DB5500_DMA_DEV63_HASH0_TX = 63,
+};
+
+#endif
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
index e7016278dfa9..a616419bea76 100644
--- a/arch/arm/mach-ux500/ste-dma40-db8500.h
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -10,145 +10,135 @@
 #ifndef STE_DMA40_DB8500_H
 #define STE_DMA40_DB8500_H
 
-#define STEDMA40_NR_DEV 64
+#define DB8500_DMA_NR_DEV 64
 
 enum dma_src_dev_type {
-	STEDMA40_DEV_SPI0_RX = 0,
-	STEDMA40_DEV_SD_MMC0_RX = 1,
-	STEDMA40_DEV_SD_MMC1_RX = 2,
-	STEDMA40_DEV_SD_MMC2_RX = 3,
-	STEDMA40_DEV_I2C1_RX = 4,
-	STEDMA40_DEV_I2C3_RX = 5,
-	STEDMA40_DEV_I2C2_RX = 6,
-	STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */
-	STEDMA40_DEV_SSP0_RX = 8,
-	STEDMA40_DEV_SSP1_RX = 9,
-	STEDMA40_DEV_MCDE_RX = 10,
-	STEDMA40_DEV_UART2_RX = 11,
-	STEDMA40_DEV_UART1_RX = 12,
-	STEDMA40_DEV_UART0_RX = 13,
-	STEDMA40_DEV_MSP2_RX = 14,
-	STEDMA40_DEV_I2C0_RX = 15,
-	STEDMA40_DEV_USB_OTG_IEP_8 = 16,
-	STEDMA40_DEV_USB_OTG_IEP_1_9 = 17,
-	STEDMA40_DEV_USB_OTG_IEP_2_10 = 18,
-	STEDMA40_DEV_USB_OTG_IEP_3_11 = 19,
-	STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
-	STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
-	STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
-	STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
-	STEDMA40_DEV_SRC_SXA0_RX_TX = 24,
-	STEDMA40_DEV_SRC_SXA1_RX_TX = 25,
-	STEDMA40_DEV_SRC_SXA2_RX_TX = 26,
-	STEDMA40_DEV_SRC_SXA3_RX_TX = 27,
-	STEDMA40_DEV_SD_MM2_RX = 28,
-	STEDMA40_DEV_SD_MM0_RX = 29,
-	STEDMA40_DEV_MSP1_RX = 30,
-	/*
-	 * This channel is either SlimBus or MSP,
-	 * never both at the same time.
-	 */
-	STEDMA40_SLIM0_CH0_RX = 31,
-	STEDMA40_DEV_MSP0_RX = 31,
-	STEDMA40_DEV_SD_MM1_RX = 32,
-	STEDMA40_DEV_SPI2_RX = 33,
-	STEDMA40_DEV_I2C3_RX2 = 34,
-	STEDMA40_DEV_SPI1_RX = 35,
-	STEDMA40_DEV_USB_OTG_IEP_4_12 = 36,
-	STEDMA40_DEV_USB_OTG_IEP_5_13 = 37,
-	STEDMA40_DEV_USB_OTG_IEP_6_14 = 38,
-	STEDMA40_DEV_USB_OTG_IEP_7_15 = 39,
-	STEDMA40_DEV_SPI3_RX = 40,
-	STEDMA40_DEV_SD_MM3_RX = 41,
-	STEDMA40_DEV_SD_MM4_RX = 42,
-	STEDMA40_DEV_SD_MM5_RX = 43,
-	STEDMA40_DEV_SRC_SXA4_RX_TX = 44,
-	STEDMA40_DEV_SRC_SXA5_RX_TX = 45,
-	STEDMA40_DEV_SRC_SXA6_RX_TX = 46,
-	STEDMA40_DEV_SRC_SXA7_RX_TX = 47,
-	STEDMA40_DEV_CAC1_RX = 48,
-	/* RX channels 49 and 50 are unused */
-	STEDMA40_DEV_MSHC_RX = 51,
-	STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52,
-	STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53,
-	STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54,
-	STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55,
-	/* RX channels 56 thru 60 are unused */
-	STEDMA40_DEV_CAC0_RX = 61,
-	/* RX channels 62 and 63 are unused */
+	DB8500_DMA_DEV0_SPI0_RX = 0,
+	DB8500_DMA_DEV1_SD_MMC0_RX = 1,
+	DB8500_DMA_DEV2_SD_MMC1_RX = 2,
+	DB8500_DMA_DEV3_SD_MMC2_RX = 3,
+	DB8500_DMA_DEV4_I2C1_RX = 4,
+	DB8500_DMA_DEV5_I2C3_RX = 5,
+	DB8500_DMA_DEV6_I2C2_RX = 6,
+	DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */
+	DB8500_DMA_DEV8_SSP0_RX = 8,
+	DB8500_DMA_DEV9_SSP1_RX = 9,
+	DB8500_DMA_DEV10_MCDE_RX = 10,
+	DB8500_DMA_DEV11_UART2_RX = 11,
+	DB8500_DMA_DEV12_UART1_RX = 12,
+	DB8500_DMA_DEV13_UART0_RX = 13,
+	DB8500_DMA_DEV14_MSP2_RX = 14,
+	DB8500_DMA_DEV15_I2C0_RX = 15,
+	DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16,
+	DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17,
+	DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18,
+	DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19,
+	DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
+	DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
+	DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
+	DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
+	DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24,
+	DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25,
+	DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26,
+	DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27,
+	DB8500_DMA_DEV28_SD_MM2_RX = 28,
+	DB8500_DMA_DEV29_SD_MM0_RX = 29,
+	DB8500_DMA_DEV30_MSP1_RX = 30,
+	/* On DB8500v2, MSP3 RX replaces MSP1 RX */
+	DB8500_DMA_DEV30_MSP3_RX = 30,
+	DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31,
+	DB8500_DMA_DEV32_SD_MM1_RX = 32,
+	DB8500_DMA_DEV33_SPI2_RX = 33,
+	DB8500_DMA_DEV34_I2C3_RX2 = 34,
+	DB8500_DMA_DEV35_SPI1_RX = 35,
+	DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36,
+	DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37,
+	DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38,
+	DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39,
+	DB8500_DMA_DEV40_SPI3_RX = 40,
+	DB8500_DMA_DEV41_SD_MM3_RX = 41,
+	DB8500_DMA_DEV42_SD_MM4_RX = 42,
+	DB8500_DMA_DEV43_SD_MM5_RX = 43,
+	DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44,
+	DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45,
+	DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46,
+	DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47,
+	DB8500_DMA_DEV48_CAC1_RX = 48,
+	/* 49, 50 and 51 are not used */
+	DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52,
+	DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53,
+	DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54,
+	DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55,
+	/* 56, 57, 58, 59 and 60 are not used */
+	DB8500_DMA_DEV61_CAC0_RX = 61,
+	/* 62 and 63 are not used */
 };
 
 enum dma_dest_dev_type {
-	STEDMA40_DEV_SPI0_TX = 0,
-	STEDMA40_DEV_SD_MMC0_TX = 1,
-	STEDMA40_DEV_SD_MMC1_TX = 2,
-	STEDMA40_DEV_SD_MMC2_TX = 3,
-	STEDMA40_DEV_I2C1_TX = 4,
-	STEDMA40_DEV_I2C3_TX = 5,
-	STEDMA40_DEV_I2C2_TX = 6,
-	STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */
-	STEDMA40_DEV_SSP0_TX = 8,
-	STEDMA40_DEV_SSP1_TX = 9,
-	/* TX channel 10 is unused */
-	STEDMA40_DEV_UART2_TX = 11,
-	STEDMA40_DEV_UART1_TX = 12,
-	STEDMA40_DEV_UART0_TX= 13,
-	STEDMA40_DEV_MSP2_TX = 14,
-	STEDMA40_DEV_I2C0_TX = 15,
-	STEDMA40_DEV_USB_OTG_OEP_8 = 16,
-	STEDMA40_DEV_USB_OTG_OEP_1_9 = 17,
-	STEDMA40_DEV_USB_OTG_OEP_2_10= 18,
-	STEDMA40_DEV_USB_OTG_OEP_3_11 = 19,
-	STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
-	STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
-	STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
-	STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
-	STEDMA40_DEV_DST_SXA0_RX_TX = 24,
-	STEDMA40_DEV_DST_SXA1_RX_TX = 25,
-	STEDMA40_DEV_DST_SXA2_RX_TX = 26,
-	STEDMA40_DEV_DST_SXA3_RX_TX = 27,
-	STEDMA40_DEV_SD_MM2_TX = 28,
-	STEDMA40_DEV_SD_MM0_TX = 29,
-	STEDMA40_DEV_MSP1_TX = 30,
-	/*
-	 * This channel is either SlimBus or MSP,
-	 * never both at the same time.
-	 */
-	STEDMA40_SLIM0_CH0_TX = 31,
-	STEDMA40_DEV_MSP0_TX = 31,
-	STEDMA40_DEV_SD_MM1_TX = 32,
-	STEDMA40_DEV_SPI2_TX = 33,
-	/* Secondary I2C3 channel */
-	STEDMA40_DEV_I2C3_TX2 = 34,
-	STEDMA40_DEV_SPI1_TX = 35,
-	STEDMA40_DEV_USB_OTG_OEP_4_12 = 36,
-	STEDMA40_DEV_USB_OTG_OEP_5_13 = 37,
-	STEDMA40_DEV_USB_OTG_OEP_6_14 = 38,
-	STEDMA40_DEV_USB_OTG_OEP_7_15 = 39,
-	STEDMA40_DEV_SPI3_TX = 40,
-	STEDMA40_DEV_SD_MM3_TX = 41,
-	STEDMA40_DEV_SD_MM4_TX = 42,
-	STEDMA40_DEV_SD_MM5_TX = 43,
-	STEDMA40_DEV_DST_SXA4_RX_TX = 44,
-	STEDMA40_DEV_DST_SXA5_RX_TX = 45,
-	STEDMA40_DEV_DST_SXA6_RX_TX = 46,
-	STEDMA40_DEV_DST_SXA7_RX_TX = 47,
-	STEDMA40_DEV_CAC1_TX = 48,
-	STEDMA40_DEV_CAC1_TX_HAC1_TX = 49,
-	STEDMA40_DEV_HAC1_TX = 50,
-	STEDMA40_MEMXCPY_TX_0 = 51,
-	STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52,
-	STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53,
-	STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54,
-	STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55,
-	STEDMA40_MEMCPY_TX_1 = 56,
-	STEDMA40_MEMCPY_TX_2 = 57,
-	STEDMA40_MEMCPY_TX_3 = 58,
-	STEDMA40_MEMCPY_TX_4 = 59,
-	STEDMA40_MEMCPY_TX_5 = 60,
-	STEDMA40_DEV_CAC0_TX = 61,
-	STEDMA40_DEV_CAC0_TX_HAC0_TX = 62,
-	STEDMA40_DEV_HAC0_TX = 63,
+	DB8500_DMA_DEV0_SPI0_TX = 0,
+	DB8500_DMA_DEV1_SD_MMC0_TX = 1,
+	DB8500_DMA_DEV2_SD_MMC1_TX = 2,
+	DB8500_DMA_DEV3_SD_MMC2_TX = 3,
+	DB8500_DMA_DEV4_I2C1_TX = 4,
+	DB8500_DMA_DEV5_I2C3_TX = 5,
+	DB8500_DMA_DEV6_I2C2_TX = 6,
+	DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */
+	DB8500_DMA_DEV8_SSP0_TX = 8,
+	DB8500_DMA_DEV9_SSP1_TX = 9,
+	/* 10 is not used*/
+	DB8500_DMA_DEV11_UART2_TX = 11,
+	DB8500_DMA_DEV12_UART1_TX = 12,
+	DB8500_DMA_DEV13_UART0_TX = 13,
+	DB8500_DMA_DEV14_MSP2_TX = 14,
+	DB8500_DMA_DEV15_I2C0_TX = 15,
+	DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16,
+	DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17,
+	DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18,
+	DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19,
+	DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
+	DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
+	DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
+	DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
+	DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24,
+	DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25,
+	DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26,
+	DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27,
+	DB8500_DMA_DEV28_SD_MM2_TX = 28,
+	DB8500_DMA_DEV29_SD_MM0_TX = 29,
+	DB8500_DMA_DEV30_MSP1_TX = 30,
+	DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31,
+	DB8500_DMA_DEV32_SD_MM1_TX = 32,
+	DB8500_DMA_DEV33_SPI2_TX = 33,
+	DB8500_DMA_DEV34_I2C3_TX2 = 34,
+	DB8500_DMA_DEV35_SPI1_TX = 35,
+	DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36,
+	DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37,
+	DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38,
+	DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39,
+	DB8500_DMA_DEV40_SPI3_TX = 40,
+	DB8500_DMA_DEV41_SD_MM3_TX = 41,
+	DB8500_DMA_DEV42_SD_MM4_TX = 42,
+	DB8500_DMA_DEV43_SD_MM5_TX = 43,
+	DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44,
+	DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45,
+	DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46,
+	DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47,
+	DB8500_DMA_DEV48_CAC1_TX  = 48,
+	DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,
+	DB8500_DMA_DEV50_HAC1_TX = 50,
+	DB8500_DMA_MEMCPY_TX_0 = 51,
+	DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52,
+	DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53,
+	DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54,
+	DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55,
+	DB8500_DMA_MEMCPY_TX_1 = 56,
+	DB8500_DMA_MEMCPY_TX_2 = 57,
+	DB8500_DMA_MEMCPY_TX_3 = 58,
+	DB8500_DMA_MEMCPY_TX_4 = 59,
+	DB8500_DMA_MEMCPY_TX_5 = 60,
+	DB8500_DMA_DEV61_CAC0_TX = 61,
+	DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,
+	DB8500_DMA_DEV63_HAC0_TX = 63,
 };
 
 #endif
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 3dff8641b03f..e38acb0f89c8 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -28,6 +28,7 @@
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
+#include <linux/amba/pl022.h>
 #include <linux/io.h>
 #include <linux/gfp.h>
 
@@ -354,6 +355,21 @@ static struct mmci_platform_data mmc0_plat_data = {
 	.gpio_cd	= -1,
 };
 
+static struct resource char_lcd_resources[] = {
+	{
+		.start = VERSATILE_CHAR_LCD_BASE,
+		.end   = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device char_lcd_device = {
+	.name           =       "arm-charlcd",
+	.id             =       -1,
+	.num_resources  =       ARRAY_SIZE(char_lcd_resources),
+	.resource       =       char_lcd_resources,
+};
+
 /*
  * Clock handling
  */
@@ -400,8 +416,13 @@ static struct clk ref24_clk = {
 	.rate	= 24000000,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup lookups[] = {
-	{	/* UART0 */
+	{	/* AMBA bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "dev:f1",
 		.clk		= &ref24_clk,
 	}, {	/* UART1 */
@@ -425,6 +446,9 @@ static struct clk_lookup lookups[] = {
 	}, {	/* MMC1 */
 		.dev_id		= "fpga:0b",
 		.clk		= &ref24_clk,
+	}, {	/* SSP */
+		.dev_id		= "dev:f4",
+		.clk		= &ref24_clk,
 	}, {	/* CLCD */
 		.dev_id		= "dev:20",
 		.clk		= &osc4_clk,
@@ -703,6 +727,12 @@ static struct pl061_platform_data gpio1_plat_data = {
 	.irq_base	= IRQ_GPIO1_START,
 };
 
+static struct pl022_ssp_controller ssp0_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 0,
+	.num_chipselect = 1,
+};
+
 #define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
 #define AACI_DMA	{ 0x80, 0x81 }
 #define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -772,7 +802,7 @@ AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
 AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
 AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
+AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
@@ -843,6 +873,7 @@ void __init versatile_init(void)
 	platform_device_register(&versatile_flash_device);
 	platform_device_register(&versatile_i2c_device);
 	platform_device_register(&smc91x_device);
+	platform_device_register(&char_lcd_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index 6fea7199c626..eb2cf7dc5c44 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
  *
 */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf1000000	@ virtual base
-		orr	\rx, \rx, #0x001F0000
-		orr	\rx, \rx, #0x00001000
+		.macro	addruart, rp, rv
+		mov	\rp,      #0x001F0000
+		orr	\rp, \rp, #0x00001000
+		orr	\rv, \rp, #0xf1000000	@ virtual base
+		orr	\rp, \rp,  #0x10000000	@ physical base
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
index 4f8f99aac938..b5e75bb44965 100644
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -30,15 +30,6 @@
 #define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
 #define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
 
-#if 0
-#define VERSATILE_PCI_VIRT_MEM_BASE0	0xf4000000
-#define VERSATILE_PCI_VIRT_MEM_BASE1	0xf5000000
-#define VERSATILE_PCI_VIRT_MEM_BASE2	0xf6000000
-
-#define PCIO_BASE			VERSATILE_PCI_VIRT_MEM_BASE0
-#define PCIMEM_BASE			VERSATILE_PCI_VIRT_MEM_BASE1
-#endif
-
 /* CIK guesswork */
 #define PCIBIOS_MIN_IO			0x44000000
 #define PCIBIOS_MIN_MEM			0x50000000
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
index 427e3612db5d..ebd8a2543d3b 100644
--- a/arch/arm/mach-versatile/include/mach/vmalloc.h
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
+#define VMALLOC_END		0xd8000000
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index 334f0df4e948..13c7e5f90a82 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -304,7 +304,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 }
 
 
-struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys);
 }
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index bb8ec7724f79..aa9730fb13bf 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -35,8 +35,6 @@
 
 MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= 0x101f1000,
-	.io_pg_offst	= ((0xf11f1000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= versatile_map_io,
 	.init_irq	= versatile_init_irq,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 239cd30fc4f5..bf469642a3f8 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -108,8 +108,6 @@ static void __init versatile_pb_init(void)
 
 MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= 0x101f1000,
-	.io_pg_offst	= ((0xf11f1000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= versatile_map_io,
 	.init_irq	= versatile_init_irq,
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 6353459bb567..c2e405a9e025 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -16,6 +16,7 @@
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/pmu.h>
+#include <asm/smp_twd.h>
 
 #include <mach/clkdev.h>
 #include <mach/ct-ca9x4.h>
@@ -53,6 +54,7 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = {
 
 static void __init ct_ca9x4_map_io(void)
 {
+	twd_base = MMIO_P2V(A9_MPCORE_TWD);
 	v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
 }
 
@@ -66,7 +68,7 @@ static void __init ct_ca9x4_init_irq(void)
 }
 
 #if 0
-static void ct_ca9x4_timer_init(void)
+static void __init ct_ca9x4_timer_init(void)
 {
 	writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
 	writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
@@ -220,12 +222,18 @@ static struct platform_device pmu_device = {
 	.resource	= pmu_resources,
 };
 
-static void ct_ca9x4_init(void)
+static void __init ct_ca9x4_init(void)
 {
 	int i;
 
 #ifdef CONFIG_CACHE_L2X0
-	l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
+	void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
+
+	/* set RAM latencies to 1 cycle for this core tile. */
+	writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+	writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+	l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
 #endif
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
@@ -237,8 +245,6 @@ static void ct_ca9x4_init(void)
 }
 
 MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
-	.phys_io	= V2M_UART0 & SECTION_MASK,
-	.io_pg_offst	= (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= ct_ca9x4_map_io,
 	.init_irq	= ct_ca9x4_init_irq,
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
index 8650f04136ef..f9e2f8d22962 100644
--- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -28,6 +28,7 @@
 #define A9_MPCORE_SCU		(CT_CA9X4_MPIC + 0x0000)
 #define A9_MPCORE_GIC_CPU	(CT_CA9X4_MPIC + 0x0100)
 #define A9_MPCORE_GIT		(CT_CA9X4_MPIC + 0x0200)
+#define A9_MPCORE_TWD		(CT_CA9X4_MPIC + 0x0600)
 #define A9_MPCORE_GIC_DIST	(CT_CA9X4_MPIC + 0x1000)
 
 /*
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index 5167e2aceeba..050d65e02a42 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -12,12 +12,10 @@
 
 #define DEBUG_LL_UART_OFFSET	0x00009000
 
-		.macro	addruart,rx,tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx,      #0x10000000
-		movne	\rx,      #0xf8000000	@ virtual base
-		orr	\rx, \rx, #DEBUG_LL_UART_OFFSET
+		.macro	addruart,rp,rv
+		mov	\rp, #DEBUG_LL_UART_OFFSET
+		orr	\rv, \rp, #0xf8000000	@ virtual base
+		orr	\rp, \rp, #0x10000000	@ physical base
 		.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h
index 72a9621ed087..5a6da4fd247e 100644
--- a/arch/arm/mach-vexpress/include/mach/smp.h
+++ b/arch/arm/mach-vexpress/include/mach/smp.h
@@ -2,14 +2,7 @@
 #define __MACH_SMP_H
 
 #include <asm/hardware/gic.h>
-
-#define hard_smp_processor_id()				\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x0F;				\
-	})
+#include <asm/smp_mpidr.h>
 
 /*
  * We use IRQ1 as the IPI
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index c84239761cb4..7eaa232180a5 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -48,7 +48,7 @@ void __init v2m_map_io(struct map_desc *tile, size_t num)
 }
 
 
-static void v2m_timer_init(void)
+static void __init v2m_timer_init(void)
 {
 	writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
 	writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
@@ -298,8 +298,13 @@ static struct clk osc2_clk = {
 	.rate	= 24000000,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup v2m_lookups[] = {
-	{	/* UART0 */
+	{	/* AMBA bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "mb:uart0",
 		.clk		= &osc2_clk,
 	}, {	/* UART1 */
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index b2eda4dc1c34..7a1fa6adb7c3 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -36,6 +36,8 @@
 #include <mach/nuc900_spi.h>
 #include <mach/map.h>
 #include <mach/fb.h>
+#include <mach/regs-ldm.h>
+#include <mach/w90p910_keypad.h>
 
 #include "cpu.h"
 
@@ -207,7 +209,7 @@ static struct nuc900_spi_info nuc900_spiflash_data = {
 	.divider	= 24,
 	.sleep		= 0,
 	.txnum		= 0,
-	.txbitlen	= 1,
+	.txbitlen	= 8,
 	.bus_num	= 0,
 };
 
@@ -256,7 +258,7 @@ static struct spi_board_info nuc900_spi_board_info[] __initdata = {
 		.modalias = "m25p80",
 		.max_speed_hz = 20000000,
 		.bus_num = 0,
-		.chip_select = 1,
+		.chip_select = 0,
 		.platform_data = &nuc900_spi_flash_data,
 		.mode = SPI_MODE_0,
 	},
@@ -361,6 +363,39 @@ struct platform_device nuc900_device_fmi = {
 
 /* KPI controller*/
 
+static int nuc900_keymap[] = {
+	KEY(0, 0, KEY_A),
+	KEY(0, 1, KEY_B),
+	KEY(0, 2, KEY_C),
+	KEY(0, 3, KEY_D),
+
+	KEY(1, 0, KEY_E),
+	KEY(1, 1, KEY_F),
+	KEY(1, 2, KEY_G),
+	KEY(1, 3, KEY_H),
+
+	KEY(2, 0, KEY_I),
+	KEY(2, 1, KEY_J),
+	KEY(2, 2, KEY_K),
+	KEY(2, 3, KEY_L),
+
+	KEY(3, 0, KEY_M),
+	KEY(3, 1, KEY_N),
+	KEY(3, 2, KEY_O),
+	KEY(3, 3, KEY_P),
+};
+
+static struct matrix_keymap_data nuc900_map_data = {
+	.keymap			= nuc900_keymap,
+	.keymap_size		= ARRAY_SIZE(nuc900_keymap),
+};
+
+struct w90p910_keypad_platform_data nuc900_keypad_info = {
+	.keymap_data	= &nuc900_map_data,
+	.prescale	= 0xfa,
+	.debounce	= 0x50,
+};
+
 static struct resource nuc900_kpi_resource[] = {
 	[0] = {
 		.start = W90X900_PA_KPI,
@@ -380,9 +415,49 @@ struct platform_device nuc900_device_kpi = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(nuc900_kpi_resource),
 	.resource	= nuc900_kpi_resource,
+	.dev		= {
+				.platform_data = &nuc900_keypad_info,
+			}
 };
 
-#ifdef CONFIG_FB_NUC900
+/* LCD controller*/
+
+static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
+	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
+	[0] = {
+		.type		= LCM_DCCS_VA_SRC_RGB565,
+		.width		= 320,
+		.height		= 240,
+		.xres		= 320,
+		.yres		= 240,
+		.bpp		= 16,
+		.pixclock	= 200000,
+		.left_margin	= 34,
+		.right_margin   = 54,
+		.hsync_len	= 10,
+		.upper_margin	= 18,
+		.lower_margin	= 4,
+		.vsync_len	= 1,
+		.dccs		= 0x8e00041a,
+		.devctl		= 0x060800c0,
+		.fbctrl		= 0x00a000a0,
+		.scale		= 0x04000400,
+	},
+};
+
+static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
+#if defined(CONFIG_GPM1040A0_320X240)
+	.displays		= &nuc900_lcd_info[0],
+#else
+	.displays		= nuc900_lcd_info,
+#endif
+	.num_displays		= ARRAY_SIZE(nuc900_lcd_info),
+	.default_display	= 0,
+	.gpio_dir		= 0x00000004,
+	.gpio_dir_mask		= 0xFFFFFFFD,
+	.gpio_data		= 0x00000004,
+	.gpio_data_mask		= 0xFFFFFFFD,
+};
 
 static struct resource nuc900_lcd_resource[] = {
 	[0] = {
@@ -406,23 +481,10 @@ struct platform_device nuc900_device_lcd = {
 	.dev              = {
 		.dma_mask               = &nuc900_device_lcd_dmamask,
 		.coherent_dma_mask      = -1,
+		.platform_data = &nuc900_fb_info,
 	}
 };
 
-void  nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd)
-{
-	struct nuc900fb_mach_info *npd;
-
-	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
-	if (npd) {
-		memcpy(npd, pd, sizeof(*npd));
-		nuc900_device_lcd.dev.platform_data = npd;
-	} else {
-		printk(KERN_ERR "no memory for LCD platform data\n");
-	}
-}
-#endif
-
 /* AUDIO controller*/
 static u64 nuc900_device_audio_dmamask = -1;
 static struct resource nuc900_ac97_resource[] = {
diff --git a/arch/arm/mach-w90x900/include/mach/i2c.h b/arch/arm/mach-w90x900/include/mach/i2c.h
new file mode 100644
index 000000000000..9ffb12d06e91
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/i2c.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_ARCH_NUC900_I2C_H
+#define __ASM_ARCH_NUC900_I2C_H
+
+struct nuc900_platform_i2c {
+	int		bus_num;
+	unsigned long   bus_freq;
+};
+
+#endif /* __ASM_ARCH_NUC900_I2C_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/include/mach/regs-gcr.h
new file mode 100644
index 000000000000..6087abd93ef5
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-gcr.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-gcr.h
+ *
+ * Copyright (c) 2010 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_GCR_H
+#define __ASM_ARCH_REGS_GCR_H
+
+/* Global control registers */
+
+#define GCR_BA		W90X900_VA_GCR
+#define REG_PDID	(GCR_BA+0x000)
+#define REG_PWRON	(GCR_BA+0x004)
+#define REG_ARBCON	(GCR_BA+0x008)
+#define REG_MFSEL	(GCR_BA+0x00C)
+#define REG_EBIDPE	(GCR_BA+0x010)
+#define REG_LCDDPE	(GCR_BA+0x014)
+#define REG_GPIOCPE	(GCR_BA+0x018)
+#define REG_GPIODPE	(GCR_BA+0x01C)
+#define REG_GPIOEPE	(GCR_BA+0x020)
+#define REG_GPIOFPE	(GCR_BA+0x024)
+#define REG_GPIOGPE	(GCR_BA+0x028)
+#define REG_GPIOHPE	(GCR_BA+0x02C)
+#define REG_GPIOIPE	(GCR_BA+0x030)
+#define REG_GTMP1	(GCR_BA+0x034)
+#define REG_GTMP2	(GCR_BA+0x038)
+#define REG_GTMP3	(GCR_BA+0x03C)
+
+#endif /*  __ASM_ARCH_REGS_GCR_H */
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index ec05bda946f3..30fccde94fb8 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -34,8 +34,6 @@ static void __init nuc910evb_init(void)
 
 MACHINE_START(W90P910EVB, "W90P910EVB")
 	/* Maintainer: Wan ZongShun */
-	.phys_io	= W90X900_PA_UART,
-	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= 0,
 	.map_io		= nuc910evb_map_io,
 	.init_irq	= nuc900_init_irq,
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index b3edc3cccf52..590c99b96dc1 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -20,51 +20,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <mach/map.h>
-#include <mach/regs-ldm.h>
 #include <mach/fb.h>
 
 #include "nuc950.h"
 
-#ifdef CONFIG_FB_NUC900
-/* LCD Controller */
-static struct nuc900fb_display __initdata nuc950_lcd_info[] = {
-	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
-	[0] = {
-		.type		= LCM_DCCS_VA_SRC_RGB565,
-		.width 		= 320,
-		.height		= 240,
-		.xres		= 320,
-		.yres		= 240,
-		.bpp		= 16,
-		.pixclock	= 200000,
-		.left_margin	= 34,
-		.right_margin   = 54,
-		.hsync_len	= 10,
-		.upper_margin	= 18,
-		.lower_margin	= 4,
-		.vsync_len	= 1,
-		.dccs		= 0x8e00041a,
-		.devctl		= 0x060800c0,
-		.fbctrl		= 0x00a000a0,
-		.scale		= 0x04000400,
-	},
-};
-
-static struct nuc900fb_mach_info nuc950_fb_info __initdata = {
-#if defined(CONFIG_GPM1040A0_320X240)
-	.displays		= &nuc950_lcd_info[0],
-#else
-	.displays		= nuc950_lcd_info,
-#endif
-	.num_displays 		= ARRAY_SIZE(nuc950_lcd_info),
-	.default_display	= 0,
-	.gpio_dir		= 0x00000004,
-	.gpio_dir_mask		= 0xFFFFFFFD,
-	.gpio_data		= 0x00000004,
-	.gpio_data_mask		= 0xFFFFFFFD,
-};
-#endif
-
 static void __init nuc950evb_map_io(void)
 {
 	nuc950_map_io();
@@ -74,15 +33,10 @@ static void __init nuc950evb_map_io(void)
 static void __init nuc950evb_init(void)
 {
 	nuc950_board_init();
-#ifdef CONFIG_FB_NUC900
-	nuc900_fb_set_platdata(&nuc950_fb_info);
-#endif
 }
 
 MACHINE_START(W90P950EVB, "W90P950EVB")
 	/* Maintainer: Wan ZongShun */
-	.phys_io	= W90X900_PA_UART,
-	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= 0,
 	.map_io		= nuc950evb_map_io,
 	.init_irq	= nuc900_init_irq,
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index e3a46f19f2bc..e09c645d61b6 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -34,8 +34,6 @@ static void __init nuc960evb_init(void)
 
 MACHINE_START(W90N960EVB, "W90N960EVB")
 	/* Maintainer: Wan ZongShun */
-	.phys_io	= W90X900_PA_UART,
-	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= 0,
 	.map_io		= nuc960evb_map_io,
 	.init_irq	= nuc900_init_irq,
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
index 656f03b3b629..1523f4136985 100644
--- a/arch/arm/mach-w90x900/nuc910.c
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -26,6 +26,8 @@
 static struct platform_device *nuc910_dev[] __initdata = {
 	&nuc900_device_ts,
 	&nuc900_device_rtc,
+	&nuc900_device_lcd,
+	&nuc900_device_kpi,
 };
 
 /* define specific CPU platform io map */
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
index 4d1f1ab044c4..5704f74a50ee 100644
--- a/arch/arm/mach-w90x900/nuc950.c
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -26,9 +26,7 @@
 static struct platform_device *nuc950_dev[] __initdata = {
 	&nuc900_device_kpi,
 	&nuc900_device_fmi,
-#ifdef CONFIG_FB_NUC900
 	&nuc900_device_lcd,
-#endif
 };
 
 /* define specific CPU platform io map */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 101105e52610..4414a01e1e8a 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -398,7 +398,7 @@ config CPU_V6
 # ARMv6k
 config CPU_32v6K
 	bool "Support ARM V6K processor extensions" if !SMP
-	depends on CPU_V6
+	depends on CPU_V6 || CPU_V7
 	default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
 	help
 	  Say Y here if your ARMv6 processor supports the 'K' extension.
@@ -717,17 +717,6 @@ config TLS_REG_EMUL
 	  a few prototypes like that in existence) and therefore access to
 	  that required register must be emulated.
 
-config HAS_TLS_REG
-	bool
-	depends on !TLS_REG_EMUL
-	default y if SMP || CPU_32v7
-	help
-	  This selects support for the CP15 thread register.
-	  It is defined to be available on some ARMv6 processors (including
-	  all SMP capable ARMv6's) or later processors.  User space may
-	  assume directly accessing that register and always obtain the
-	  expected value only on ARMv7 and above.
-
 config NEEDS_SYSCALL_FOR_CMPXCHG
 	bool
 	help
@@ -782,13 +771,22 @@ config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
 		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
-		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \
+		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4
 	default y
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
 	help
 	  This option enables the L2x0 PrimeCell.
 
+config CACHE_PL310
+	bool
+	depends on CACHE_L2X0
+	default y if CPU_V7 && !CPU_V6
+	help
+	  This option enables optimisations for the PL310 cache
+	  controller.
+
 config CACHE_TAUROS2
 	bool "Enable the Tauros2 L2 cache controller"
 	depends on (ARCH_DOVE || ARCH_MMP)
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index e8d34a80851c..d63b6c413758 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -15,7 +15,6 @@ endif
 obj-$(CONFIG_MODULES)		+= proc-syms.o
 
 obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
-obj-$(CONFIG_DISCONTIGMEM)	+= discontig.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 
 obj-$(CONFIG_CPU_ABRT_NOMMU)	+= abort-nommu.o
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 6f98c358989a..724ba3bce72c 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -885,8 +885,23 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (ai_usermode & UM_SIGNAL)
 		force_sig(SIGBUS, current);
-	else
-		set_cr(cr_no_alignment);
+	else {
+		/*
+		 * We're about to disable the alignment trap and return to
+		 * user space.  But if an interrupt occurs before actually
+		 * reaching user space, then the IRQ vector entry code will
+		 * notice that we were still in kernel space and therefore
+		 * the alignment trap won't be re-enabled in that case as it
+		 * is presumed to be always on from kernel space.
+		 * Let's prevent that race by disabling interrupts here (they
+		 * are disabled on the way back to user space anyway in
+		 * entry-common.S) and disable the alignment trap only if
+		 * there is no work pending for this thread.
+		 */
+		raw_local_irq_disable();
+		if (!(current_thread_info()->flags & _TIF_WORK_MASK))
+			set_cr(cr_no_alignment);
+	}
 
 	return 0;
 }
@@ -924,8 +939,20 @@ static int __init alignment_init(void)
 		ai_usermode = UM_FIXUP;
 	}
 
-	hook_fault_code(1, do_alignment, SIGILL, "alignment exception");
-	hook_fault_code(3, do_alignment, SIGILL, "alignment exception");
+	hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
+			"alignment exception");
+
+	/*
+	 * ARMv6K and ARMv7 use fault status 3 (0b00011) as Access Flag section
+	 * fault, not as alignment error.
+	 *
+	 * TODO: handle ARMv6K properly. Runtime check for 'K' extension is
+	 * needed.
+	 */
+	if (cpu_architecture() <= CPU_ARCH_ARMv6) {
+		hook_fault_code(3, do_alignment, SIGBUS, BUS_ADRALN,
+				"alignment exception");
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
index 7148e53e6078..1fa6f71470de 100644
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -38,6 +38,17 @@
 #define CACHE_DLIMIT	(CACHE_DSIZE * 2)
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(fa_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(fa_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Clean and invalidate all cache entries in a particular address
@@ -233,6 +244,7 @@ ENDPROC(fa_dma_unmap_area)
 
 	.type	fa_cache_fns, #object
 ENTRY(fa_cache_fns)
+	.long	fa_flush_icache_all
 	.long	fa_flush_kern_cache_all
 	.long	fa_flush_user_cache_all
 	.long	fa_flush_user_cache_range
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 9982eb385c0f..170c9bb95866 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -28,14 +28,24 @@
 static void __iomem *l2x0_base;
 static DEFINE_SPINLOCK(l2x0_lock);
 static uint32_t l2x0_way_mask;	/* Bitmask of active ways */
+static uint32_t l2x0_size;
 
-static inline void cache_wait(void __iomem *reg, unsigned long mask)
+static inline void cache_wait_way(void __iomem *reg, unsigned long mask)
 {
-	/* wait for the operation to complete */
+	/* wait for cache operation by line or way to complete */
 	while (readl_relaxed(reg) & mask)
 		;
 }
 
+#ifdef CONFIG_CACHE_PL310
+static inline void cache_wait(void __iomem *reg, unsigned long mask)
+{
+	/* cache operations by line are atomic on PL310 */
+}
+#else
+#define cache_wait	cache_wait_way
+#endif
+
 static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
@@ -103,14 +113,40 @@ static void l2x0_cache_sync(void)
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
-static inline void l2x0_inv_all(void)
+static void l2x0_flush_all(void)
+{
+	unsigned long flags;
+
+	/* clean all ways */
+	spin_lock_irqsave(&l2x0_lock, flags);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
+	cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
+	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2x0_clean_all(void)
+{
+	unsigned long flags;
+
+	/* clean all ways */
+	spin_lock_irqsave(&l2x0_lock, flags);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_WAY);
+	cache_wait_way(l2x0_base + L2X0_CLEAN_WAY, l2x0_way_mask);
+	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
+static void l2x0_inv_all(void)
 {
 	unsigned long flags;
 
 	/* invalidate all ways */
 	spin_lock_irqsave(&l2x0_lock, flags);
+	/* Invalidating when L2 is enabled is a nono */
+	BUG_ON(readl(l2x0_base + L2X0_CTRL) & 1);
 	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
-	cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+	cache_wait_way(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
 	cache_sync();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
@@ -159,6 +195,11 @@ static void l2x0_clean_range(unsigned long start, unsigned long end)
 	void __iomem *base = l2x0_base;
 	unsigned long flags;
 
+	if ((end - start) >= l2x0_size) {
+		l2x0_clean_all();
+		return;
+	}
+
 	spin_lock_irqsave(&l2x0_lock, flags);
 	start &= ~(CACHE_LINE_SIZE - 1);
 	while (start < end) {
@@ -184,6 +225,11 @@ static void l2x0_flush_range(unsigned long start, unsigned long end)
 	void __iomem *base = l2x0_base;
 	unsigned long flags;
 
+	if ((end - start) >= l2x0_size) {
+		l2x0_flush_all();
+		return;
+	}
+
 	spin_lock_irqsave(&l2x0_lock, flags);
 	start &= ~(CACHE_LINE_SIZE - 1);
 	while (start < end) {
@@ -206,10 +252,20 @@ static void l2x0_flush_range(unsigned long start, unsigned long end)
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
+static void l2x0_disable(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&l2x0_lock, flags);
+	writel(0, l2x0_base + L2X0_CTRL);
+	spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
 void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 {
 	__u32 aux;
 	__u32 cache_id;
+	__u32 way_size = 0;
 	int ways;
 	const char *type;
 
@@ -244,6 +300,13 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 	l2x0_way_mask = (1 << ways) - 1;
 
 	/*
+	 * L2 cache Size =  Way size * Number of ways
+	 */
+	way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
+	way_size = 1 << (way_size + 3);
+	l2x0_size = ways * way_size * SZ_1K;
+
+	/*
 	 * Check if l2x0 controller is already enabled.
 	 * If you are booting from non-secure mode
 	 * accessing the below registers will fault.
@@ -263,8 +326,11 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 	outer_cache.clean_range = l2x0_clean_range;
 	outer_cache.flush_range = l2x0_flush_range;
 	outer_cache.sync = l2x0_cache_sync;
+	outer_cache.flush_all = l2x0_flush_all;
+	outer_cache.inv_all = l2x0_inv_all;
+	outer_cache.disable = l2x0_disable;
 
 	printk(KERN_INFO "%s cache controller enabled\n", type);
-	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
-			 ways, cache_id, aux);
+	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
+			ways, cache_id, aux, l2x0_size);
 }
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index c2ff3c599fee..2e2bc406a18d 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -13,6 +13,15 @@
 #include "proc-macros.S"
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v3_flush_icache_all)
+	mov	pc, lr
+ENDPROC(v3_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Invalidate all cache entries in a particular address
@@ -122,6 +131,7 @@ ENDPROC(v3_dma_map_area)
 
 	.type	v3_cache_fns, #object
 ENTRY(v3_cache_fns)
+	.long	v3_flush_icache_all
 	.long	v3_flush_kern_cache_all
 	.long	v3_flush_user_cache_all
 	.long	v3_flush_user_cache_range
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 4810f7e3e813..a8fefb523f19 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -13,6 +13,15 @@
 #include "proc-macros.S"
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v4_flush_icache_all)
+	mov	pc, lr
+ENDPROC(v4_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Invalidate all cache entries in a particular address
@@ -134,6 +143,7 @@ ENDPROC(v4_dma_map_area)
 
 	.type	v4_cache_fns, #object
 ENTRY(v4_cache_fns)
+	.long	v4_flush_icache_all
 	.long	v4_flush_kern_cache_all
 	.long	v4_flush_user_cache_all
 	.long	v4_flush_user_cache_range
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index df8368afa102..d3644db467b7 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -51,6 +51,17 @@ flush_base:
 	.text
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v4wb_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(v4wb_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Clean and invalidate all cache entries in a particular address
@@ -244,6 +255,7 @@ ENDPROC(v4wb_dma_unmap_area)
 
 	.type	v4wb_cache_fns, #object
 ENTRY(v4wb_cache_fns)
+	.long	v4wb_flush_icache_all
 	.long	v4wb_flush_kern_cache_all
 	.long	v4wb_flush_user_cache_all
 	.long	v4wb_flush_user_cache_range
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 45c70312f43b..49c2b66cf3dd 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -41,6 +41,17 @@
 #define CACHE_DLIMIT	16384
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(v4wt_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(v4wt_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Invalidate all cache entries in a particular address
@@ -188,6 +199,7 @@ ENDPROC(v4wt_dma_map_area)
 
 	.type	v4wt_cache_fns, #object
 ENTRY(v4wt_cache_fns)
+	.long	v4wt_flush_icache_all
 	.long	v4wt_flush_kern_cache_all
 	.long	v4wt_flush_user_cache_all
 	.long	v4wt_flush_user_cache_range
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 86aa689ef1aa..99fa688dfadd 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -21,18 +21,22 @@
 #define D_CACHE_LINE_SIZE	32
 #define BTB_FLUSH_SIZE		8
 
-#ifdef CONFIG_ARM_ERRATA_411920
 /*
- * Invalidate the entire I cache (this code is a workaround for the ARM1136
- * erratum 411920 - Invalidate Instruction Cache operation can fail. This
- * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore.
+ *	v6_flush_icache_all()
+ *
+ *	Flush the whole I-cache.
  *
- * Registers:
- *   r0 - set to 0
- *   r1 - corrupted
+ *	ARM1136 erratum 411920 - Invalidate Instruction Cache operation can fail.
+ *	This erratum is present in 1136, 1156 and 1176. It does not affect the
+ *	MPCore.
+ *
+ *	Registers:
+ *	r0 - set to 0
+ *	r1 - corrupted
  */
-ENTRY(v6_icache_inval_all)
+ENTRY(v6_flush_icache_all)
 	mov	r0, #0
+#ifdef CONFIG_ARM_ERRATA_411920
 	mrs	r1, cpsr
 	cpsid	ifa				@ disable interrupts
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate entire I-cache
@@ -43,8 +47,11 @@ ENTRY(v6_icache_inval_all)
 	.rept	11				@ ARM Ltd recommends at least
 	nop					@ 11 NOPs
 	.endr
-	mov	pc, lr
+#else
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I-cache
 #endif
+	mov	pc, lr
+ENDPROC(v6_flush_icache_all)
 
 /*
  *	v6_flush_cache_all()
@@ -60,7 +67,7 @@ ENTRY(v6_flush_kern_cache_all)
 #ifndef CONFIG_ARM_ERRATA_411920
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
 #else
-	b	v6_icache_inval_all
+	b	v6_flush_icache_all
 #endif
 #else
 	mcr	p15, 0, r0, c7, c15, 0		@ Cache clean+invalidate
@@ -138,7 +145,7 @@ ENTRY(v6_coherent_user_range)
 #ifndef CONFIG_ARM_ERRATA_411920
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
 #else
-	b	v6_icache_inval_all
+	b	v6_flush_icache_all
 #endif
 #else
 	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
@@ -312,6 +319,7 @@ ENDPROC(v6_dma_unmap_area)
 
 	.type	v6_cache_fns, #object
 ENTRY(v6_cache_fns)
+	.long	v6_flush_icache_all
 	.long	v6_flush_kern_cache_all
 	.long	v6_flush_user_cache_all
 	.long	v6_flush_user_cache_range
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 37c8157e116e..a3ebf7a4f49b 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -18,6 +18,21 @@
 #include "proc-macros.S"
 
 /*
+ *	v7_flush_icache_all()
+ *
+ *	Flush the whole I-cache.
+ *
+ *	Registers:
+ *	r0 - set to 0
+ */
+ENTRY(v7_flush_icache_all)
+	mov	r0, #0
+	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)		@ invalidate I-cache inner shareable
+	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)		@ I+BTB cache invalidate
+	mov	pc, lr
+ENDPROC(v7_flush_icache_all)
+
+/*
  *	v7_flush_dcache_all()
  *
  *	Flush the whole D-cache.
@@ -91,11 +106,8 @@ ENTRY(v7_flush_kern_cache_all)
  THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
 	bl	v7_flush_dcache_all
 	mov	r0, #0
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c7, c1, 0		@ invalidate I-cache inner shareable
-#else
-	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
-#endif
+	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)	@ invalidate I-cache inner shareable
+	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)	@ I+BTB cache invalidate
  ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
  THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
 	mov	pc, lr
@@ -171,11 +183,8 @@ ENTRY(v7_coherent_user_range)
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c7, c1, 6		@ invalidate BTB Inner Shareable
-#else
-	mcr	p15, 0, r0, c7, c5, 6		@ invalidate BTB
-#endif
+	ALT_SMP(mcr	p15, 0, r0, c7, c1, 6)	@ invalidate BTB Inner Shareable
+	ALT_UP(mcr	p15, 0, r0, c7, c5, 6)	@ invalidate BTB
 	dsb
 	isb
 	mov	pc, lr
@@ -309,6 +318,7 @@ ENDPROC(v7_dma_unmap_area)
 
 	.type	v7_cache_fns, #object
 ENTRY(v7_cache_fns)
+	.long	v7_flush_icache_all
 	.long	v7_flush_kern_cache_all
 	.long	v7_flush_user_cache_all
 	.long	v7_flush_user_cache_range
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index 598c51ad5071..b8061519ce77 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -73,7 +73,7 @@ void v4_mc_copy_user_highpage(struct page *to, struct page *from,
 {
 	void *kto = kmap_atomic(to, KM_USER1);
 
-	if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
 		__flush_dcache_page(page_mapping(from), from);
 
 	spin_lock(&minicache_lock);
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index f55fa1044f72..bdba6c65c901 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -79,7 +79,7 @@ static void v6_copy_user_highpage_aliasing(struct page *to,
 	unsigned int offset = CACHE_COLOUR(vaddr);
 	unsigned long kfrom, kto;
 
-	if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
 		__flush_dcache_page(page_mapping(from), from);
 
 	/* FIXME: not highmem safe */
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
index 9920c0ae2096..649bbcd325bf 100644
--- a/arch/arm/mm/copypage-xscale.c
+++ b/arch/arm/mm/copypage-xscale.c
@@ -95,7 +95,7 @@ void xscale_mc_copy_user_highpage(struct page *to, struct page *from,
 {
 	void *kto = kmap_atomic(to, KM_USER1);
 
-	if (test_and_clear_bit(PG_dcache_dirty, &from->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &from->flags))
 		__flush_dcache_page(page_mapping(from), from);
 
 	spin_lock(&minicache_lock);
diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c
deleted file mode 100644
index c8c0c4b0f0a3..000000000000
--- a/arch/arm/mm/discontig.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/arm/mm/discontig.c
- *
- * Discontiguous memory support.
- *
- * Initial code: Copyright (C) 1999-2000 Nicolas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/mmzone.h>
-#include <linux/bootmem.h>
-
-#if MAX_NUMNODES != 4 && MAX_NUMNODES != 16
-# error Fix Me Please
-#endif
-
-/*
- * Our node_data structure for discontiguous memory.
- */
-
-pg_data_t discontig_node_data[MAX_NUMNODES] = {
-  { .bdata = &bootmem_node_data[0] },
-  { .bdata = &bootmem_node_data[1] },
-  { .bdata = &bootmem_node_data[2] },
-  { .bdata = &bootmem_node_data[3] },
-#if MAX_NUMNODES == 16
-  { .bdata = &bootmem_node_data[4] },
-  { .bdata = &bootmem_node_data[5] },
-  { .bdata = &bootmem_node_data[6] },
-  { .bdata = &bootmem_node_data[7] },
-  { .bdata = &bootmem_node_data[8] },
-  { .bdata = &bootmem_node_data[9] },
-  { .bdata = &bootmem_node_data[10] },
-  { .bdata = &bootmem_node_data[11] },
-  { .bdata = &bootmem_node_data[12] },
-  { .bdata = &bootmem_node_data[13] },
-  { .bdata = &bootmem_node_data[14] },
-  { .bdata = &bootmem_node_data[15] },
-#endif
-};
-
-EXPORT_SYMBOL(discontig_node_data);
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 9e7742f0a102..e4dd0646e859 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -183,6 +183,8 @@ static void *
 __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 {
 	struct arm_vmregion *c;
+	size_t align;
+	int bit;
 
 	if (!consistent_pte[0]) {
 		printk(KERN_ERR "%s: not initialised\n", __func__);
@@ -191,9 +193,20 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 	}
 
 	/*
+	 * Align the virtual region allocation - maximum alignment is
+	 * a section size, minimum is a page size.  This helps reduce
+	 * fragmentation of the DMA space, and also prevents allocations
+	 * smaller than a section from crossing a section boundary.
+	 */
+	bit = fls(size - 1) + 1;
+	if (bit > SECTION_SHIFT)
+		bit = SECTION_SHIFT;
+	align = 1 << bit;
+
+	/*
 	 * Allocate a virtual address in the consistent mapping region.
 	 */
-	c = arm_vmregion_alloc(&consistent_head, size,
+	c = arm_vmregion_alloc(&consistent_head, align, size,
 			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
 	if (c) {
 		pte_t *pte;
@@ -216,6 +229,8 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 			}
 		} while (size -= PAGE_SIZE);
 
+		dsb();
+
 		return (void *)c->vm_start;
 	}
 	return NULL;
@@ -508,6 +523,12 @@ void ___dma_page_dev_to_cpu(struct page *page, unsigned long off,
 		outer_inv_range(paddr, paddr + size);
 
 	dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
+
+	/*
+	 * Mark the D-cache clean for this page to avoid extra flushing.
+	 */
+	if (dir != DMA_TO_DEVICE && off == 0 && size >= PAGE_SIZE)
+		set_bit(PG_dcache_clean, &page->flags);
 }
 EXPORT_SYMBOL(___dma_page_dev_to_cpu);
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 9b906dec1ca1..83e59f870426 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -28,6 +28,7 @@
 
 static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
 
+#if __LINUX_ARM_ARCH__ < 6
 /*
  * We take the easy way out of this problem - we make the
  * PTE uncacheable.  However, we leave the write buffer on.
@@ -65,6 +66,30 @@ static int do_adjust_pte(struct vm_area_struct *vma, unsigned long address,
 	return ret;
 }
 
+#if USE_SPLIT_PTLOCKS
+/*
+ * If we are using split PTE locks, then we need to take the page
+ * lock here.  Otherwise we are using shared mm->page_table_lock
+ * which is already locked, thus cannot take it.
+ */
+static inline void do_pte_lock(spinlock_t *ptl)
+{
+	/*
+	 * Use nested version here to indicate that we are already
+	 * holding one similar spinlock.
+	 */
+	spin_lock_nested(ptl, SINGLE_DEPTH_NESTING);
+}
+
+static inline void do_pte_unlock(spinlock_t *ptl)
+{
+	spin_unlock(ptl);
+}
+#else /* !USE_SPLIT_PTLOCKS */
+static inline void do_pte_lock(spinlock_t *ptl) {}
+static inline void do_pte_unlock(spinlock_t *ptl) {}
+#endif /* USE_SPLIT_PTLOCKS */
+
 static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
 	unsigned long pfn)
 {
@@ -88,13 +113,13 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address,
 	 * open-code the spin-locking.
 	 */
 	ptl = pte_lockptr(vma->vm_mm, pmd);
-	pte = pte_offset_map_nested(pmd, address);
-	spin_lock(ptl);
+	pte = pte_offset_map(pmd, address);
+	do_pte_lock(ptl);
 
 	ret = do_adjust_pte(vma, address, pfn, pte);
 
-	spin_unlock(ptl);
-	pte_unmap_nested(pte);
+	do_pte_unlock(ptl);
+	pte_unmap(pte);
 
 	return ret;
 }
@@ -141,7 +166,7 @@ make_coherent(struct address_space *mapping, struct vm_area_struct *vma,
  * a page table, or changing an existing PTE.  Basically, there are two
  * things that we need to take care of:
  *
- *  1. If PG_dcache_dirty is set for the page, we need to ensure
+ *  1. If PG_dcache_clean is not set for the page, we need to ensure
  *     that any cache entries for the kernels virtual memory
  *     range are written back to the page.
  *  2. If we have multiple shared mappings of the same space in
@@ -168,10 +193,8 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
 		return;
 
 	mapping = page_mapping(page);
-#ifndef CONFIG_SMP
-	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
 		__flush_dcache_page(mapping, page);
-#endif
 	if (mapping) {
 		if (cache_is_vivt())
 			make_coherent(mapping, vma, addr, ptep, pfn);
@@ -179,6 +202,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
 			__flush_icache_all();
 	}
 }
+#endif	/* __LINUX_ARM_ARCH__ < 6 */
 
 /*
  * Check whether the write buffer has physical address aliasing
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index cbfb2edcf7d1..1e21e125fe3a 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -413,7 +413,16 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 	pmd_k = pmd_offset(pgd_k, addr);
 	pmd   = pmd_offset(pgd, addr);
 
-	if (pmd_none(*pmd_k))
+	/*
+	 * On ARM one Linux PGD entry contains two hardware entries (see page
+	 * tables layout in pgtable.h). We normally guarantee that we always
+	 * fill both L1 entries. But create_mapping() doesn't follow the rule.
+	 * It can create inidividual L1 entries, so here we have to call
+	 * pmd_none() check for the entry really corresponded to address, not
+	 * for the first of pair.
+	 */
+	index = (addr >> SECTION_SHIFT) & 1;
+	if (pmd_none(pmd_k[index]))
 		goto bad_area;
 
 	copy_pmd(pmd, pmd_k);
@@ -463,15 +472,10 @@ static struct fsr_info {
 	 * defines these to be "precise" aborts.
 	 */
 	{ do_bad,		SIGSEGV, 0,		"vector exception"		   },
-	{ do_bad,		SIGILL,	 BUS_ADRALN,	"alignment exception"		   },
+	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
 	{ do_bad,		SIGKILL, 0,		"terminal exception"		   },
-	{ do_bad,		SIGILL,	 BUS_ADRALN,	"alignment exception"		   },
-/* Do we need runtime check ? */
-#if __LINUX_ARM_ARCH__ < 6
+	{ do_bad,		SIGBUS,	 BUS_ADRALN,	"alignment exception"		   },
 	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
-#else
-	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"I-cache maintenance fault"	   },
-#endif
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
 	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
 	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
@@ -508,13 +512,15 @@ static struct fsr_info {
 
 void __init
 hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
-		int sig, const char *name)
+		int sig, int code, const char *name)
 {
-	if (nr >= 0 && nr < ARRAY_SIZE(fsr_info)) {
-		fsr_info[nr].fn   = fn;
-		fsr_info[nr].sig  = sig;
-		fsr_info[nr].name = name;
-	}
+	if (nr < 0 || nr >= ARRAY_SIZE(fsr_info))
+		BUG();
+
+	fsr_info[nr].fn   = fn;
+	fsr_info[nr].sig  = sig;
+	fsr_info[nr].code = code;
+	fsr_info[nr].name = name;
 }
 
 /*
@@ -575,6 +581,19 @@ static struct fsr_info ifsr_info[] = {
 	{ do_bad,		SIGBUS,  0,		"unknown 31"			   },
 };
 
+void __init
+hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *),
+		 int sig, int code, const char *name)
+{
+	if (nr < 0 || nr >= ARRAY_SIZE(ifsr_info))
+		BUG();
+
+	ifsr_info[nr].fn   = fn;
+	ifsr_info[nr].sig  = sig;
+	ifsr_info[nr].code = code;
+	ifsr_info[nr].name = name;
+}
+
 asmlinkage void __exception
 do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 {
@@ -594,3 +613,25 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 	arm_notify_die("", regs, &info, ifsr, 0);
 }
 
+static int __init exceptions_init(void)
+{
+	if (cpu_architecture() >= CPU_ARCH_ARMv6) {
+		hook_fault_code(4, do_translation_fault, SIGSEGV, SEGV_MAPERR,
+				"I-cache maintenance fault");
+	}
+
+	if (cpu_architecture() >= CPU_ARCH_ARMv7) {
+		/*
+		 * TODO: Access flag faults introduced in ARMv6K.
+		 * Runtime check for 'K' extension is needed
+		 */
+		hook_fault_code(3, do_bad, SIGSEGV, SEGV_MAPERR,
+				"section access flag fault");
+		hook_fault_code(6, do_bad, SIGSEGV, SEGV_MAPERR,
+				"section access flag fault");
+	}
+
+	return 0;
+}
+
+arch_initcall(exceptions_init);
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c6844cb9b508..391ffae75098 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -17,6 +17,7 @@
 #include <asm/smp_plat.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
+#include <asm/smp_plat.h>
 
 #include "mm.h"
 
@@ -39,6 +40,18 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 	    : "cc");
 }
 
+static void flush_icache_alias(unsigned long pfn, unsigned long vaddr, unsigned long len)
+{
+	unsigned long colour = CACHE_COLOUR(vaddr);
+	unsigned long offset = vaddr & (PAGE_SIZE - 1);
+	unsigned long to;
+
+	set_pte_ext(TOP_PTE(ALIAS_FLUSH_START) + colour, pfn_pte(pfn, PAGE_KERNEL), 0);
+	to = ALIAS_FLUSH_START + (colour << PAGE_SHIFT) + offset;
+	flush_tlb_kernel_page(to);
+	flush_icache_range(to, to + len);
+}
+
 void flush_cache_mm(struct mm_struct *mm)
 {
 	if (cache_is_vivt()) {
@@ -89,16 +102,16 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig
 	if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
 		__flush_icache_all();
 }
+
 #else
-#define flush_pfn_alias(pfn,vaddr)	do { } while (0)
+#define flush_pfn_alias(pfn,vaddr)		do { } while (0)
+#define flush_icache_alias(pfn,vaddr,len)	do { } while (0)
 #endif
 
-#ifdef CONFIG_SMP
 static void flush_ptrace_access_other(void *args)
 {
 	__flush_icache_all();
 }
-#endif
 
 static
 void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
@@ -118,15 +131,16 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 		return;
 	}
 
-	/* VIPT non-aliasing cache */
+	/* VIPT non-aliasing D-cache */
 	if (vma->vm_flags & VM_EXEC) {
 		unsigned long addr = (unsigned long)kaddr;
-		__cpuc_coherent_kern_range(addr, addr + len);
-#ifdef CONFIG_SMP
+		if (icache_is_vipt_aliasing())
+			flush_icache_alias(page_to_pfn(page), uaddr, len);
+		else
+			__cpuc_coherent_kern_range(addr, addr + len);
 		if (cache_ops_need_broadcast())
 			smp_call_function(flush_ptrace_access_other,
 					  NULL, 1);
-#endif
 	}
 }
 
@@ -215,6 +229,36 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
 	flush_dcache_mmap_unlock(mapping);
 }
 
+#if __LINUX_ARM_ARCH__ >= 6
+void __sync_icache_dcache(pte_t pteval)
+{
+	unsigned long pfn;
+	struct page *page;
+	struct address_space *mapping;
+
+	if (!pte_present_user(pteval))
+		return;
+	if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
+		/* only flush non-aliasing VIPT caches for exec mappings */
+		return;
+	pfn = pte_pfn(pteval);
+	if (!pfn_valid(pfn))
+		return;
+
+	page = pfn_to_page(pfn);
+	if (cache_is_vipt_aliasing())
+		mapping = page_mapping(page);
+	else
+		mapping = NULL;
+
+	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
+		__flush_dcache_page(mapping, page);
+	/* pte_exec() already checked above for non-aliasing VIPT cache */
+	if (cache_is_vipt_nonaliasing() || pte_exec(pteval))
+		__flush_icache_all();
+}
+#endif
+
 /*
  * Ensure cache coherency between kernel mapping and userspace mapping
  * of this page.
@@ -246,17 +290,16 @@ void flush_dcache_page(struct page *page)
 
 	mapping = page_mapping(page);
 
-#ifndef CONFIG_SMP
-	if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
-		set_bit(PG_dcache_dirty, &page->flags);
-	else
-#endif
-	{
+	if (!cache_ops_need_broadcast() &&
+	    mapping && !mapping_mapped(mapping))
+		clear_bit(PG_dcache_clean, &page->flags);
+	else {
 		__flush_dcache_page(mapping, page);
 		if (mapping && cache_is_vivt())
 			__flush_dcache_aliases(mapping, page);
 		else if (mapping)
 			__flush_icache_all();
+		set_bit(PG_dcache_clean, &page->flags);
 	}
 }
 EXPORT_SYMBOL(flush_dcache_page);
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 6ab244062b4a..c435fd9e1da9 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -36,18 +36,17 @@ void kunmap(struct page *page)
 }
 EXPORT_SYMBOL(kunmap);
 
-void *kmap_atomic(struct page *page, enum km_type type)
+void *__kmap_atomic(struct page *page)
 {
 	unsigned int idx;
 	unsigned long vaddr;
 	void *kmap;
+	int type;
 
 	pagefault_disable();
 	if (!PageHighMem(page))
 		return page_address(page);
 
-	debug_kmap_atomic(type);
-
 #ifdef CONFIG_DEBUG_HIGHMEM
 	/*
 	 * There is no cache coherency issue when non VIVT, so force the
@@ -61,6 +60,8 @@ void *kmap_atomic(struct page *page, enum km_type type)
 	if (kmap)
 		return kmap;
 
+	type = kmap_atomic_idx_push();
+
 	idx = type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
@@ -80,14 +81,17 @@ void *kmap_atomic(struct page *page, enum km_type type)
 
 	return (void *)vaddr;
 }
-EXPORT_SYMBOL(kmap_atomic);
+EXPORT_SYMBOL(__kmap_atomic);
 
-void kunmap_atomic(void *kvaddr, enum km_type type)
+void __kunmap_atomic(void *kvaddr)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
-	unsigned int idx = type + KM_TYPE_NR * smp_processor_id();
+	int idx, type;
 
 	if (kvaddr >= (void *)FIXADDR_START) {
+		type = kmap_atomic_idx();
+		idx = type + KM_TYPE_NR * smp_processor_id();
+
 		if (cache_is_vivt())
 			__cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
 #ifdef CONFIG_DEBUG_HIGHMEM
@@ -97,21 +101,23 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 #else
 		(void) idx;  /* to kill a warning */
 #endif
+		kmap_atomic_idx_pop();
 	} else if (vaddr >= PKMAP_ADDR(0) && vaddr < PKMAP_ADDR(LAST_PKMAP)) {
 		/* this address was obtained through kmap_high_get() */
 		kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)]));
 	}
 	pagefault_enable();
 }
-EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(__kunmap_atomic);
 
-void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+void *kmap_atomic_pfn(unsigned long pfn)
 {
-	unsigned int idx;
 	unsigned long vaddr;
+	int idx, type;
 
 	pagefault_disable();
 
+	type = kmap_atomic_idx_push();
 	idx = type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index f6a999465323..5164069ced42 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -17,6 +17,8 @@
 #include <linux/initrd.h>
 #include <linux/highmem.h>
 #include <linux/gfp.h>
+#include <linux/memblock.h>
+#include <linux/sort.h>
 
 #include <asm/mach-types.h>
 #include <asm/sections.h>
@@ -79,38 +81,37 @@ struct meminfo meminfo;
 void show_mem(void)
 {
 	int free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0, slab = 0, node, i;
+	int shared = 0, cached = 0, slab = 0, i;
 	struct meminfo * mi = &meminfo;
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	for_each_online_node(node) {
-		for_each_nodebank (i,mi,node) {
-			struct membank *bank = &mi->bank[i];
-			unsigned int pfn1, pfn2;
-			struct page *page, *end;
-
-			pfn1 = bank_pfn_start(bank);
-			pfn2 = bank_pfn_end(bank);
-
-			page = pfn_to_page(pfn1);
-			end  = pfn_to_page(pfn2 - 1) + 1;
-
-			do {
-				total++;
-				if (PageReserved(page))
-					reserved++;
-				else if (PageSwapCache(page))
-					cached++;
-				else if (PageSlab(page))
-					slab++;
-				else if (!page_count(page))
-					free++;
-				else
-					shared += page_count(page) - 1;
-				page++;
-			} while (page < end);
-		}
+
+	for_each_bank (i, mi) {
+		struct membank *bank = &mi->bank[i];
+		unsigned int pfn1, pfn2;
+		struct page *page, *end;
+
+		pfn1 = bank_pfn_start(bank);
+		pfn2 = bank_pfn_end(bank);
+
+		page = pfn_to_page(pfn1);
+		end  = pfn_to_page(pfn2 - 1) + 1;
+
+		do {
+			total++;
+			if (PageReserved(page))
+				reserved++;
+			else if (PageSwapCache(page))
+				cached++;
+			else if (PageSlab(page))
+				slab++;
+			else if (!page_count(page))
+				free++;
+			else
+				shared += page_count(page) - 1;
+			page++;
+		} while (page < end);
 	}
 
 	printk("%d pages of RAM\n", total);
@@ -121,15 +122,16 @@ void show_mem(void)
 	printk("%d pages swap cached\n", cached);
 }
 
-static void __init find_node_limits(int node, struct meminfo *mi,
-	unsigned long *min, unsigned long *max_low, unsigned long *max_high)
+static void __init find_limits(unsigned long *min, unsigned long *max_low,
+	unsigned long *max_high)
 {
+	struct meminfo *mi = &meminfo;
 	int i;
 
 	*min = -1UL;
 	*max_low = *max_high = 0;
 
-	for_each_nodebank(i, mi, node) {
+	for_each_bank (i, mi) {
 		struct membank *bank = &mi->bank[i];
 		unsigned long start, end;
 
@@ -147,155 +149,73 @@ static void __init find_node_limits(int node, struct meminfo *mi,
 	}
 }
 
-/*
- * FIXME: We really want to avoid allocating the bootmap bitmap
- * over the top of the initrd.  Hopefully, this is located towards
- * the start of a bank, so if we allocate the bootmap bitmap at
- * the end, we won't clash.
- */
-static unsigned int __init
-find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
-{
-	unsigned int start_pfn, i, bootmap_pfn;
-
-	start_pfn   = PAGE_ALIGN(__pa(_end)) >> PAGE_SHIFT;
-	bootmap_pfn = 0;
-
-	for_each_nodebank(i, mi, node) {
-		struct membank *bank = &mi->bank[i];
-		unsigned int start, end;
-
-		start = bank_pfn_start(bank);
-		end   = bank_pfn_end(bank);
-
-		if (end < start_pfn)
-			continue;
-
-		if (start < start_pfn)
-			start = start_pfn;
-
-		if (end <= start)
-			continue;
-
-		if (end - start >= bootmap_pages) {
-			bootmap_pfn = start;
-			break;
-		}
-	}
-
-	if (bootmap_pfn == 0)
-		BUG();
-
-	return bootmap_pfn;
-}
-
-static int __init check_initrd(struct meminfo *mi)
-{
-	int initrd_node = -2;
-#ifdef CONFIG_BLK_DEV_INITRD
-	unsigned long end = phys_initrd_start + phys_initrd_size;
-
-	/*
-	 * Make sure that the initrd is within a valid area of
-	 * memory.
-	 */
-	if (phys_initrd_size) {
-		unsigned int i;
-
-		initrd_node = -1;
-
-		for (i = 0; i < mi->nr_banks; i++) {
-			struct membank *bank = &mi->bank[i];
-			if (bank_phys_start(bank) <= phys_initrd_start &&
-			    end <= bank_phys_end(bank))
-				initrd_node = bank->node;
-		}
-	}
-
-	if (initrd_node == -1) {
-		printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond "
-		       "physical memory - disabling initrd\n",
-		       phys_initrd_start, phys_initrd_size);
-		phys_initrd_start = phys_initrd_size = 0;
-	}
-#endif
-
-	return initrd_node;
-}
-
-static void __init bootmem_init_node(int node, struct meminfo *mi,
-	unsigned long start_pfn, unsigned long end_pfn)
+static void __init arm_bootmem_init(unsigned long start_pfn,
+	unsigned long end_pfn)
 {
-	unsigned long boot_pfn;
+	struct memblock_region *reg;
 	unsigned int boot_pages;
+	phys_addr_t bitmap;
 	pg_data_t *pgdat;
-	int i;
 
 	/*
-	 * Allocate the bootmem bitmap page.
+	 * Allocate the bootmem bitmap page.  This must be in a region
+	 * of memory which has already been mapped.
 	 */
 	boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
-	boot_pfn = find_bootmap_pfn(node, mi, boot_pages);
+	bitmap = memblock_alloc_base(boot_pages << PAGE_SHIFT, L1_CACHE_BYTES,
+				__pfn_to_phys(end_pfn));
 
 	/*
-	 * Initialise the bootmem allocator for this node, handing the
+	 * Initialise the bootmem allocator, handing the
 	 * memory banks over to bootmem.
 	 */
-	node_set_online(node);
-	pgdat = NODE_DATA(node);
-	init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
+	node_set_online(0);
+	pgdat = NODE_DATA(0);
+	init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn);
+
+	/* Free the lowmem regions from memblock into bootmem. */
+	for_each_memblock(memory, reg) {
+		unsigned long start = memblock_region_memory_base_pfn(reg);
+		unsigned long end = memblock_region_memory_end_pfn(reg);
+
+		if (end >= end_pfn)
+			end = end_pfn;
+		if (start >= end)
+			break;
 
-	for_each_nodebank(i, mi, node) {
-		struct membank *bank = &mi->bank[i];
-		if (!bank->highmem)
-			free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+		free_bootmem(__pfn_to_phys(start), (end - start) << PAGE_SHIFT);
 	}
 
-	/*
-	 * Reserve the bootmem bitmap for this node.
-	 */
-	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
-			     boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
-}
-
-static void __init bootmem_reserve_initrd(int node)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
-	pg_data_t *pgdat = NODE_DATA(node);
-	int res;
+	/* Reserve the lowmem memblock reserved regions in bootmem. */
+	for_each_memblock(reserved, reg) {
+		unsigned long start = memblock_region_reserved_base_pfn(reg);
+		unsigned long end = memblock_region_reserved_end_pfn(reg);
 
-	res = reserve_bootmem_node(pgdat, phys_initrd_start,
-			     phys_initrd_size, BOOTMEM_EXCLUSIVE);
+		if (end >= end_pfn)
+			end = end_pfn;
+		if (start >= end)
+			break;
 
-	if (res == 0) {
-		initrd_start = __phys_to_virt(phys_initrd_start);
-		initrd_end = initrd_start + phys_initrd_size;
-	} else {
-		printk(KERN_ERR
-			"INITRD: 0x%08lx+0x%08lx overlaps in-use "
-			"memory region - disabling initrd\n",
-			phys_initrd_start, phys_initrd_size);
+		reserve_bootmem(__pfn_to_phys(start),
+			        (end - start) << PAGE_SHIFT, BOOTMEM_DEFAULT);
 	}
-#endif
 }
 
-static void __init bootmem_free_node(int node, struct meminfo *mi)
+static void __init arm_bootmem_free(unsigned long min, unsigned long max_low,
+	unsigned long max_high)
 {
 	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
-	unsigned long min, max_low, max_high;
-	int i;
-
-	find_node_limits(node, mi, &min, &max_low, &max_high);
+	struct memblock_region *reg;
 
 	/*
-	 * initialise the zones within this node.
+	 * initialise the zones.
 	 */
 	memset(zone_size, 0, sizeof(zone_size));
 
 	/*
-	 * The size of this node has already been determined.  If we need
-	 * to do anything fancy with the allocation of this memory to the
-	 * zones, now is the time to do it.
+	 * The memory size has already been determined.  If we need
+	 * to do anything fancy with the allocation of this memory
+	 * to the zones, now is the time to do it.
 	 */
 	zone_size[0] = max_low - min;
 #ifdef CONFIG_HIGHMEM
@@ -303,116 +223,114 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
 #endif
 
 	/*
-	 * For each bank in this node, calculate the size of the holes.
-	 *  holes = node_size - sum(bank_sizes_in_node)
+	 * Calculate the size of the holes.
+	 *  holes = node_size - sum(bank_sizes)
 	 */
 	memcpy(zhole_size, zone_size, sizeof(zhole_size));
-	for_each_nodebank(i, mi, node) {
-		int idx = 0;
+	for_each_memblock(memory, reg) {
+		unsigned long start = memblock_region_memory_base_pfn(reg);
+		unsigned long end = memblock_region_memory_end_pfn(reg);
+
+		if (start < max_low) {
+			unsigned long low_end = min(end, max_low);
+			zhole_size[0] -= low_end - start;
+		}
 #ifdef CONFIG_HIGHMEM
-		if (mi->bank[i].highmem)
-			idx = ZONE_HIGHMEM;
+		if (end > max_low) {
+			unsigned long high_start = max(start, max_low);
+			zhole_size[ZONE_HIGHMEM] -= end - high_start;
+		}
 #endif
-		zhole_size[idx] -= bank_pfn_size(&mi->bank[i]);
 	}
 
 	/*
 	 * Adjust the sizes according to any special requirements for
 	 * this machine type.
 	 */
-	arch_adjust_zones(node, zone_size, zhole_size);
+	arch_adjust_zones(zone_size, zhole_size);
 
-	free_area_init_node(node, zone_size, min, zhole_size);
+	free_area_init_node(0, zone_size, min, zhole_size);
 }
 
 #ifndef CONFIG_SPARSEMEM
 int pfn_valid(unsigned long pfn)
 {
-	struct meminfo *mi = &meminfo;
-	unsigned int left = 0, right = mi->nr_banks;
-
-	do {
-		unsigned int mid = (right + left) / 2;
-		struct membank *bank = &mi->bank[mid];
-
-		if (pfn < bank_pfn_start(bank))
-			right = mid;
-		else if (pfn >= bank_pfn_end(bank))
-			left = mid + 1;
-		else
-			return 1;
-	} while (left < right);
-	return 0;
+	return memblock_is_memory(pfn << PAGE_SHIFT);
 }
 EXPORT_SYMBOL(pfn_valid);
 
-static void arm_memory_present(struct meminfo *mi, int node)
+static void arm_memory_present(void)
 {
 }
 #else
-static void arm_memory_present(struct meminfo *mi, int node)
+static void arm_memory_present(void)
 {
-	int i;
-	for_each_nodebank(i, mi, node) {
-		struct membank *bank = &mi->bank[i];
-		memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
-	}
+	struct memblock_region *reg;
+
+	for_each_memblock(memory, reg)
+		memory_present(0, memblock_region_memory_base_pfn(reg),
+			       memblock_region_memory_end_pfn(reg));
 }
 #endif
 
-void __init bootmem_init(void)
+static int __init meminfo_cmp(const void *_a, const void *_b)
 {
-	struct meminfo *mi = &meminfo;
-	unsigned long min, max_low, max_high;
-	int node, initrd_node;
+	const struct membank *a = _a, *b = _b;
+	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
 
-	/*
-	 * Locate which node contains the ramdisk image, if any.
-	 */
-	initrd_node = check_initrd(mi);
+void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
+{
+	int i;
 
-	max_low = max_high = 0;
+	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
 
-	/*
-	 * Run through each node initialising the bootmem allocator.
-	 */
-	for_each_node(node) {
-		unsigned long node_low, node_high;
+	memblock_init();
+	for (i = 0; i < mi->nr_banks; i++)
+		memblock_add(mi->bank[i].start, mi->bank[i].size);
 
-		find_node_limits(node, mi, &min, &node_low, &node_high);
+	/* Register the kernel text, kernel data and initrd with memblock. */
+#ifdef CONFIG_XIP_KERNEL
+	memblock_reserve(__pa(_sdata), _end - _sdata);
+#else
+	memblock_reserve(__pa(_stext), _end - _stext);
+#endif
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (phys_initrd_size) {
+		memblock_reserve(phys_initrd_start, phys_initrd_size);
 
-		if (node_low > max_low)
-			max_low = node_low;
-		if (node_high > max_high)
-			max_high = node_high;
+		/* Now convert initrd to virtual addresses */
+		initrd_start = __phys_to_virt(phys_initrd_start);
+		initrd_end = initrd_start + phys_initrd_size;
+	}
+#endif
 
-		/*
-		 * If there is no memory in this node, ignore it.
-		 * (We can't have nodes which have no lowmem)
-		 */
-		if (node_low == 0)
-			continue;
+	arm_mm_memblock_reserve();
 
-		bootmem_init_node(node, mi, min, node_low);
+	/* reserve any platform specific memblock areas */
+	if (mdesc->reserve)
+		mdesc->reserve();
 
-		/*
-		 * Reserve any special node zero regions.
-		 */
-		if (node == 0)
-			reserve_node_zero(NODE_DATA(node));
+	memblock_analyze();
+	memblock_dump_all();
+}
 
-		/*
-		 * If the initrd is in this node, reserve its memory.
-		 */
-		if (node == initrd_node)
-			bootmem_reserve_initrd(node);
+void __init bootmem_init(void)
+{
+	unsigned long min, max_low, max_high;
 
-		/*
-		 * Sparsemem tries to allocate bootmem in memory_present(),
-		 * so must be done after the fixed reservations
-		 */
-		arm_memory_present(mi, node);
-	}
+	max_low = max_high = 0;
+
+	find_limits(&min, &max_low, &max_high);
+
+	arm_bootmem_init(min, max_low);
+
+	/*
+	 * Sparsemem tries to allocate bootmem in memory_present(),
+	 * so must be done after the fixed reservations
+	 */
+	arm_memory_present();
 
 	/*
 	 * sparse_init() needs the bootmem allocator up and running.
@@ -420,12 +338,11 @@ void __init bootmem_init(void)
 	sparse_init();
 
 	/*
-	 * Now free memory in each node - free_area_init_node needs
+	 * Now free the memory - free_area_init_node needs
 	 * the sparse mem_map arrays initialized by sparse_init()
 	 * for memmap_init_zone(), otherwise all PFNs are invalid.
 	 */
-	for_each_node(node)
-		bootmem_free_node(node, mi);
+	arm_bootmem_free(min, max_low, max_high);
 
 	high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
 
@@ -460,7 +377,7 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s)
 }
 
 static inline void
-free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
+free_memmap(unsigned long start_pfn, unsigned long end_pfn)
 {
 	struct page *start_pg, *end_pg;
 	unsigned long pg, pgend;
@@ -483,41 +400,90 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
 	 * free the section of the memmap array.
 	 */
 	if (pg < pgend)
-		free_bootmem_node(NODE_DATA(node), pg, pgend - pg);
+		free_bootmem(pg, pgend - pg);
 }
 
 /*
  * The mem_map array can get very big.  Free the unused area of the memory map.
  */
-static void __init free_unused_memmap_node(int node, struct meminfo *mi)
+static void __init free_unused_memmap(struct meminfo *mi)
 {
 	unsigned long bank_start, prev_bank_end = 0;
 	unsigned int i;
 
 	/*
-	 * [FIXME] This relies on each bank being in address order.  This
-	 * may not be the case, especially if the user has provided the
-	 * information on the command line.
+	 * This relies on each bank being in address order.
+	 * The banks are sorted previously in bootmem_init().
 	 */
-	for_each_nodebank(i, mi, node) {
+	for_each_bank(i, mi) {
 		struct membank *bank = &mi->bank[i];
 
 		bank_start = bank_pfn_start(bank);
-		if (bank_start < prev_bank_end) {
-			printk(KERN_ERR "MEM: unordered memory banks.  "
-				"Not freeing memmap.\n");
-			break;
-		}
 
 		/*
 		 * If we had a previous bank, and there is a space
 		 * between the current bank and the previous, free it.
 		 */
-		if (prev_bank_end && prev_bank_end != bank_start)
-			free_memmap(node, prev_bank_end, bank_start);
+		if (prev_bank_end && prev_bank_end < bank_start)
+			free_memmap(prev_bank_end, bank_start);
 
-		prev_bank_end = bank_pfn_end(bank);
+		/*
+		 * Align up here since the VM subsystem insists that the
+		 * memmap entries are valid from the bank end aligned to
+		 * MAX_ORDER_NR_PAGES.
+		 */
+		prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
+	}
+}
+
+static void __init free_highpages(void)
+{
+#ifdef CONFIG_HIGHMEM
+	unsigned long max_low = max_low_pfn + PHYS_PFN_OFFSET;
+	struct memblock_region *mem, *res;
+
+	/* set highmem page free */
+	for_each_memblock(memory, mem) {
+		unsigned long start = memblock_region_memory_base_pfn(mem);
+		unsigned long end = memblock_region_memory_end_pfn(mem);
+
+		/* Ignore complete lowmem entries */
+		if (end <= max_low)
+			continue;
+
+		/* Truncate partial highmem entries */
+		if (start < max_low)
+			start = max_low;
+
+		/* Find and exclude any reserved regions */
+		for_each_memblock(reserved, res) {
+			unsigned long res_start, res_end;
+
+			res_start = memblock_region_reserved_base_pfn(res);
+			res_end = memblock_region_reserved_end_pfn(res);
+
+			if (res_end < start)
+				continue;
+			if (res_start < start)
+				res_start = start;
+			if (res_start > end)
+				res_start = end;
+			if (res_end > end)
+				res_end = end;
+			if (res_start != start)
+				totalhigh_pages += free_area(start, res_start,
+							     NULL);
+			start = res_end;
+			if (start == end)
+				break;
+		}
+
+		/* And now free anything which remains */
+		if (start < end)
+			totalhigh_pages += free_area(start, end, NULL);
 	}
+	totalram_pages += totalhigh_pages;
+#endif
 }
 
 /*
@@ -528,21 +494,20 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi)
 void __init mem_init(void)
 {
 	unsigned long reserved_pages, free_pages;
-	int i, node;
+	struct memblock_region *reg;
+	int i;
+#ifdef CONFIG_HAVE_TCM
+	/* These pointers are filled in on TCM detection */
+	extern u32 dtcm_end;
+	extern u32 itcm_end;
+#endif
 
-#ifndef CONFIG_DISCONTIGMEM
 	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
-#endif
 
 	/* this will put all unused low memory onto the freelists */
-	for_each_online_node(node) {
-		pg_data_t *pgdat = NODE_DATA(node);
-
-		free_unused_memmap_node(node, &meminfo);
+	free_unused_memmap(&meminfo);
 
-		if (pgdat->node_spanned_pages != 0)
-			totalram_pages += free_all_bootmem_node(pgdat);
-	}
+	totalram_pages += free_all_bootmem();
 
 #ifdef CONFIG_SA1111
 	/* now that our DMA memory is actually so designated, we can free it */
@@ -550,41 +515,28 @@ void __init mem_init(void)
 				    __phys_to_pfn(__pa(swapper_pg_dir)), NULL);
 #endif
 
-#ifdef CONFIG_HIGHMEM
-	/* set highmem page free */
-	for_each_online_node(node) {
-		for_each_nodebank (i, &meminfo, node) {
-			unsigned long start = bank_pfn_start(&meminfo.bank[i]);
-			unsigned long end = bank_pfn_end(&meminfo.bank[i]);
-			if (start >= max_low_pfn + PHYS_PFN_OFFSET)
-				totalhigh_pages += free_area(start, end, NULL);
-		}
-	}
-	totalram_pages += totalhigh_pages;
-#endif
+	free_highpages();
 
 	reserved_pages = free_pages = 0;
 
-	for_each_online_node(node) {
-		for_each_nodebank(i, &meminfo, node) {
-			struct membank *bank = &meminfo.bank[i];
-			unsigned int pfn1, pfn2;
-			struct page *page, *end;
-
-			pfn1 = bank_pfn_start(bank);
-			pfn2 = bank_pfn_end(bank);
-
-			page = pfn_to_page(pfn1);
-			end  = pfn_to_page(pfn2 - 1) + 1;
-
-			do {
-				if (PageReserved(page))
-					reserved_pages++;
-				else if (!page_count(page))
-					free_pages++;
-				page++;
-			} while (page < end);
-		}
+	for_each_bank(i, &meminfo) {
+		struct membank *bank = &meminfo.bank[i];
+		unsigned int pfn1, pfn2;
+		struct page *page, *end;
+
+		pfn1 = bank_pfn_start(bank);
+		pfn2 = bank_pfn_end(bank);
+
+		page = pfn_to_page(pfn1);
+		end  = pfn_to_page(pfn2 - 1) + 1;
+
+		do {
+			if (PageReserved(page))
+				reserved_pages++;
+			else if (!page_count(page))
+				free_pages++;
+			page++;
+		} while (page < end);
 	}
 
 	/*
@@ -593,9 +545,11 @@ void __init mem_init(void)
 	 */
 	printk(KERN_INFO "Memory:");
 	num_physpages = 0;
-	for (i = 0; i < meminfo.nr_banks; i++) {
-		num_physpages += bank_pfn_size(&meminfo.bank[i]);
-		printk(" %ldMB", bank_phys_size(&meminfo.bank[i]) >> 20);
+	for_each_memblock(memory, reg) {
+		unsigned long pages = memblock_region_memory_end_pfn(reg) -
+			memblock_region_memory_base_pfn(reg);
+		num_physpages += pages;
+		printk(" %ldMB", pages >> (20 - PAGE_SHIFT));
 	}
 	printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT));
 
@@ -611,6 +565,10 @@ void __init mem_init(void)
 
 	printk(KERN_NOTICE "Virtual kernel memory layout:\n"
 			"    vector  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+#ifdef CONFIG_HAVE_TCM
+			"    DTCM    : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+			"    ITCM    : 0x%08lx - 0x%08lx   (%4ld kB)\n"
+#endif
 			"    fixmap  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
 #ifdef CONFIG_MMU
 			"    DMA     : 0x%08lx - 0x%08lx   (%4ld MB)\n"
@@ -627,6 +585,10 @@ void __init mem_init(void)
 
 			MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
 				(PAGE_SIZE)),
+#ifdef CONFIG_HAVE_TCM
+			MLK(DTCM_OFFSET, (unsigned long) dtcm_end),
+			MLK(ITCM_OFFSET, (unsigned long) itcm_end),
+#endif
 			MLK(FIXADDR_START, FIXADDR_TOP),
 #ifdef CONFIG_MMU
 			MLM(CONSISTENT_BASE, CONSISTENT_END),
@@ -641,7 +603,7 @@ void __init mem_init(void)
 
 			MLK_ROUNDUP(__init_begin, __init_end),
 			MLK_ROUNDUP(_text, _etext),
-			MLK_ROUNDUP(_data, _edata));
+			MLK_ROUNDUP(_sdata, _edata));
 
 #undef MLK
 #undef MLM
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 28c8b950ef04..17e7b0b57e49 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -42,78 +42,11 @@
  */
 #define VM_ARM_SECTION_MAPPING	0x80000000
 
-static int remap_area_pte(pmd_t *pmd, unsigned long addr, unsigned long end,
-			  unsigned long phys_addr, const struct mem_type *type)
-{
-	pgprot_t prot = __pgprot(type->prot_pte);
-	pte_t *pte;
-
-	pte = pte_alloc_kernel(pmd, addr);
-	if (!pte)
-		return -ENOMEM;
-
-	do {
-		if (!pte_none(*pte))
-			goto bad;
-
-		set_pte_ext(pte, pfn_pte(phys_addr >> PAGE_SHIFT, prot), 0);
-		phys_addr += PAGE_SIZE;
-	} while (pte++, addr += PAGE_SIZE, addr != end);
-	return 0;
-
- bad:
-	printk(KERN_CRIT "remap_area_pte: page already exists\n");
-	BUG();
-}
-
-static inline int remap_area_pmd(pgd_t *pgd, unsigned long addr,
-				 unsigned long end, unsigned long phys_addr,
-				 const struct mem_type *type)
-{
-	unsigned long next;
-	pmd_t *pmd;
-	int ret = 0;
-
-	pmd = pmd_alloc(&init_mm, pgd, addr);
-	if (!pmd)
-		return -ENOMEM;
-
-	do {
-		next = pmd_addr_end(addr, end);
-		ret = remap_area_pte(pmd, addr, next, phys_addr, type);
-		if (ret)
-			return ret;
-		phys_addr += next - addr;
-	} while (pmd++, addr = next, addr != end);
-	return ret;
-}
-
-static int remap_area_pages(unsigned long start, unsigned long pfn,
-			    size_t size, const struct mem_type *type)
-{
-	unsigned long addr = start;
-	unsigned long next, end = start + size;
-	unsigned long phys_addr = __pfn_to_phys(pfn);
-	pgd_t *pgd;
-	int err = 0;
-
-	BUG_ON(addr >= end);
-	pgd = pgd_offset_k(addr);
-	do {
-		next = pgd_addr_end(addr, end);
-		err = remap_area_pmd(pgd, addr, next, phys_addr, type);
-		if (err)
-			break;
-		phys_addr += next - addr;
-	} while (pgd++, addr = next, addr != end);
-
-	return err;
-}
-
 int ioremap_page(unsigned long virt, unsigned long phys,
 		 const struct mem_type *mtype)
 {
-	return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype);
+	return ioremap_page_range(virt, virt + PAGE_SIZE, phys,
+				  __pgprot(mtype->prot_pte));
 }
 EXPORT_SYMBOL(ioremap_page);
 
@@ -268,6 +201,16 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
 		return NULL;
 
+	/*
+	 * Don't allow RAM to be mapped - this causes problems with ARMv6+
+	 */
+	if (pfn_valid(pfn)) {
+		printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory.  This leads\n"
+		       KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
+		       KERN_WARNING "will fail in the next kernel release.  Please fix your driver.\n");
+		WARN_ON(1);
+	}
+
 	type = get_mem_type(mtype);
 	if (!type)
 		return NULL;
@@ -294,7 +237,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 		err = remap_area_sections(addr, pfn, size, type);
 	} else
 #endif
-		err = remap_area_pages(addr, pfn, size, type);
+		err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn),
+					 __pgprot(type->prot_pte));
 
 	if (err) {
  		vunmap((void *)addr);
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 815d08eecbb0..6630620380a4 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -28,7 +28,5 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 
 #endif
 
-struct pglist_data;
-
 void __init bootmem_init(void);
-void reserve_node_zero(struct pglist_data *pgdat);
+void arm_mm_memblock_reserve(void);
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index f5abc51c5a07..b0a98305055c 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -7,6 +7,7 @@
 #include <linux/shm.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/random.h>
 #include <asm/cputype.h>
 #include <asm/system.h>
 
@@ -80,6 +81,9 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	        start_addr = addr = TASK_UNMAPPED_BASE;
 	        mm->cached_hole_size = 0;
 	}
+	/* 8 bits of randomness in 20 address space bits */
+	if (current->flags & PF_RANDOMIZE)
+		addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT;
 
 full_search:
 	if (do_align)
@@ -140,3 +144,25 @@ int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
 {
 	return !(pfn + (size >> PAGE_SHIFT) > 0x00100000);
 }
+
+#ifdef CONFIG_STRICT_DEVMEM
+
+#include <linux/ioport.h>
+
+/*
+ * devmem_is_allowed() checks to see if /dev/mem access to a certain
+ * address is valid. The argument is a physical page number.
+ * We mimic x86 here by disallowing access to system RAM as well as
+ * device-exclusive MMIO regions. This effectively disable read()/write()
+ * on /dev/mem.
+ */
+int devmem_is_allowed(unsigned long pfn)
+{
+	if (iomem_is_exclusive(pfn << PAGE_SHIFT))
+		return 0;
+	if (!page_is_ram(pfn))
+		return 1;
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 285894171186..72ad3e1f56cf 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -11,13 +11,12 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/bootmem.h>
 #include <linux/mman.h>
 #include <linux/nodemask.h>
-#include <linux/sort.h>
+#include <linux/memblock.h>
+#include <linux/fs.h>
 
 #include <asm/cputype.h>
-#include <asm/mach-types.h>
 #include <asm/sections.h>
 #include <asm/cachetype.h>
 #include <asm/setup.h>
@@ -247,6 +246,9 @@ static struct mem_type mem_types[] = {
 		.domain    = DOMAIN_USER,
 	},
 	[MT_MEMORY] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_WRITE | L_PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
@@ -255,9 +257,25 @@ static struct mem_type mem_types[] = {
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_MEMORY_NONCACHED] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
+		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
+	[MT_MEMORY_DTCM] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_WRITE,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
+		.domain    = DOMAIN_KERNEL,
+	},
+	[MT_MEMORY_ITCM] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_WRITE | L_PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE,
+		.domain    = DOMAIN_KERNEL,
+	},
 };
 
 const struct mem_type *get_mem_type(unsigned int type)
@@ -291,9 +309,8 @@ static void __init build_mem_type_table(void)
 			cachepolicy = CPOLICY_WRITEBACK;
 		ecc_mask = 0;
 	}
-#ifdef CONFIG_SMP
-	cachepolicy = CPOLICY_WRITEALLOC;
-#endif
+	if (is_smp())
+		cachepolicy = CPOLICY_WRITEALLOC;
 
 	/*
 	 * Strip out features not present on earlier architectures.
@@ -387,21 +404,22 @@ static void __init build_mem_type_table(void)
 	cp = &cache_policies[cachepolicy];
 	vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
 
-#ifndef CONFIG_SMP
 	/*
 	 * Only use write-through for non-SMP systems
 	 */
-	if (cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH)
+	if (!is_smp() && cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH)
 		vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte;
-#endif
 
 	/*
 	 * Enable CPU-specific coherency if supported.
 	 * (Only available on XSC3 at the moment.)
 	 */
-	if (arch_is_coherent() && cpu_is_xsc3())
+	if (arch_is_coherent() && cpu_is_xsc3()) {
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-
+		mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
+		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
+	}
 	/*
 	 * ARMv6 and above have extended page tables.
 	 */
@@ -414,20 +432,23 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 
-#ifdef CONFIG_SMP
-		/*
-		 * Mark memory with the "shared" attribute for SMP systems
-		 */
-		user_pgprot |= L_PTE_SHARED;
-		kern_pgprot |= L_PTE_SHARED;
-		vecs_pgprot |= L_PTE_SHARED;
-		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
-		mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
-		mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
-		mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
-		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
-#endif
+		if (is_smp()) {
+			/*
+			 * Mark memory with the "shared" attribute
+			 * for SMP systems
+			 */
+			user_pgprot |= L_PTE_SHARED;
+			kern_pgprot |= L_PTE_SHARED;
+			vecs_pgprot |= L_PTE_SHARED;
+			mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
+			mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
+			mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
+			mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+			mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
+		}
 	}
 
 	/*
@@ -463,6 +484,8 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
 
 	switch (cp->pmd) {
@@ -486,20 +509,43 @@ static void __init build_mem_type_table(void)
 	}
 }
 
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+			      unsigned long size, pgprot_t vma_prot)
+{
+	if (!pfn_valid(pfn))
+		return pgprot_noncached(vma_prot);
+	else if (file->f_flags & O_SYNC)
+		return pgprot_writecombine(vma_prot);
+	return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
+#endif
+
 #define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
 
-static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
-				  unsigned long end, unsigned long pfn,
-				  const struct mem_type *type)
+static void __init *early_alloc(unsigned long sz)
 {
-	pte_t *pte;
+	void *ptr = __va(memblock_alloc(sz, sz));
+	memset(ptr, 0, sz);
+	return ptr;
+}
 
+static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
+{
 	if (pmd_none(*pmd)) {
-		pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
-		__pmd_populate(pmd, __pa(pte) | type->prot_l1);
+		pte_t *pte = early_alloc(2 * PTRS_PER_PTE * sizeof(pte_t));
+		__pmd_populate(pmd, __pa(pte) | prot);
 	}
+	BUG_ON(pmd_bad(*pmd));
+	return pte_offset_kernel(pmd, addr);
+}
 
-	pte = pte_offset_kernel(pmd, addr);
+static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
+				  unsigned long end, unsigned long pfn,
+				  const struct mem_type *type)
+{
+	pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
 	do {
 		set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
 		pfn++;
@@ -668,7 +714,7 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 		create_mapping(io_desc + i);
 }
 
-static unsigned long __initdata vmalloc_reserve = SZ_128M;
+static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
 
 /*
  * vmalloc=size forces the vmalloc area to be exactly 'size'
@@ -677,7 +723,7 @@ static unsigned long __initdata vmalloc_reserve = SZ_128M;
  */
 static int __init early_vmalloc(char *arg)
 {
-	vmalloc_reserve = memparse(arg, NULL);
+	unsigned long vmalloc_reserve = memparse(arg, NULL);
 
 	if (vmalloc_reserve < SZ_16M) {
 		vmalloc_reserve = SZ_16M;
@@ -692,22 +738,27 @@ static int __init early_vmalloc(char *arg)
 			"vmalloc area is too big, limiting to %luMB\n",
 			vmalloc_reserve >> 20);
 	}
+
+	vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
 	return 0;
 }
 early_param("vmalloc", early_vmalloc);
 
-#define VMALLOC_MIN	(void *)(VMALLOC_END - vmalloc_reserve)
+static phys_addr_t lowmem_limit __initdata = 0;
 
 static void __init sanity_check_meminfo(void)
 {
 	int i, j, highmem = 0;
 
+	lowmem_limit = __pa(vmalloc_min - 1) + 1;
+	memblock_set_current_limit(lowmem_limit);
+
 	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
 		struct membank *bank = &meminfo.bank[j];
 		*bank = meminfo.bank[i];
 
 #ifdef CONFIG_HIGHMEM
-		if (__va(bank->start) > VMALLOC_MIN ||
+		if (__va(bank->start) > vmalloc_min ||
 		    __va(bank->start) < (void *)PAGE_OFFSET)
 			highmem = 1;
 
@@ -717,8 +768,8 @@ static void __init sanity_check_meminfo(void)
 		 * Split those memory banks which are partially overlapping
 		 * the vmalloc area greatly simplifying things later.
 		 */
-		if (__va(bank->start) < VMALLOC_MIN &&
-		    bank->size > VMALLOC_MIN - __va(bank->start)) {
+		if (__va(bank->start) < vmalloc_min &&
+		    bank->size > vmalloc_min - __va(bank->start)) {
 			if (meminfo.nr_banks >= NR_BANKS) {
 				printk(KERN_CRIT "NR_BANKS too low, "
 						 "ignoring high memory\n");
@@ -727,12 +778,12 @@ static void __init sanity_check_meminfo(void)
 					(meminfo.nr_banks - i) * sizeof(*bank));
 				meminfo.nr_banks++;
 				i++;
-				bank[1].size -= VMALLOC_MIN - __va(bank->start);
-				bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+				bank[1].size -= vmalloc_min - __va(bank->start);
+				bank[1].start = __pa(vmalloc_min - 1) + 1;
 				bank[1].highmem = highmem = 1;
 				j++;
 			}
-			bank->size = VMALLOC_MIN - __va(bank->start);
+			bank->size = vmalloc_min - __va(bank->start);
 		}
 #else
 		bank->highmem = highmem;
@@ -741,7 +792,7 @@ static void __init sanity_check_meminfo(void)
 		 * Check whether this memory bank would entirely overlap
 		 * the vmalloc area.
 		 */
-		if (__va(bank->start) >= VMALLOC_MIN ||
+		if (__va(bank->start) >= vmalloc_min ||
 		    __va(bank->start) < (void *)PAGE_OFFSET) {
 			printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
 			       "(vmalloc region overlap).\n",
@@ -753,9 +804,9 @@ static void __init sanity_check_meminfo(void)
 		 * Check whether this memory bank would partially overlap
 		 * the vmalloc area.
 		 */
-		if (__va(bank->start + bank->size) > VMALLOC_MIN ||
+		if (__va(bank->start + bank->size) > vmalloc_min ||
 		    __va(bank->start + bank->size) < __va(bank->start)) {
-			unsigned long newsize = VMALLOC_MIN - __va(bank->start);
+			unsigned long newsize = vmalloc_min - __va(bank->start);
 			printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
 			       "to -%.8lx (vmalloc region overlap).\n",
 			       bank->start, bank->start + bank->size - 1,
@@ -776,8 +827,7 @@ static void __init sanity_check_meminfo(void)
 			 * rather difficult.
 			 */
 			reason = "with VIPT aliasing cache";
-#ifdef CONFIG_SMP
-		} else if (tlb_ops_need_broadcast()) {
+		} else if (is_smp() && tlb_ops_need_broadcast()) {
 			/*
 			 * kmap_high needs to occasionally flush TLB entries,
 			 * however, if the TLB entries need to be broadcast
@@ -787,7 +837,6 @@ static void __init sanity_check_meminfo(void)
 			 *   (must not be called with irqs off)
 			 */
 			reason = "without hardware TLB ops broadcasting";
-#endif
 		}
 		if (reason) {
 			printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
@@ -803,6 +852,7 @@ static void __init sanity_check_meminfo(void)
 static inline void prepare_page_table(void)
 {
 	unsigned long addr;
+	phys_addr_t end;
 
 	/*
 	 * Clear out all the mappings below the kernel image.
@@ -818,110 +868,39 @@ static inline void prepare_page_table(void)
 		pmd_clear(pmd_off_k(addr));
 
 	/*
+	 * Find the end of the first block of lowmem.
+	 */
+	end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
+	if (end >= lowmem_limit)
+		end = lowmem_limit;
+
+	/*
 	 * Clear out all the kernel space mappings, except for the first
 	 * memory bank, up to the end of the vmalloc region.
 	 */
-	for (addr = __phys_to_virt(bank_phys_end(&meminfo.bank[0]));
+	for (addr = __phys_to_virt(end);
 	     addr < VMALLOC_END; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
 }
 
 /*
- * Reserve the various regions of node 0
+ * Reserve the special regions of memory
  */
-void __init reserve_node_zero(pg_data_t *pgdat)
+void __init arm_mm_memblock_reserve(void)
 {
-	unsigned long res_size = 0;
-
-	/*
-	 * Register the kernel text and data with bootmem.
-	 * Note that this can only be in node 0.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
-			BOOTMEM_DEFAULT);
-#else
-	reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
-			BOOTMEM_DEFAULT);
-#endif
-
 	/*
 	 * Reserve the page tables.  These are already in use,
 	 * and can only be in node 0.
 	 */
-	reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
-			     PTRS_PER_PGD * sizeof(pgd_t), BOOTMEM_DEFAULT);
-
-	/*
-	 * Hmm... This should go elsewhere, but we really really need to
-	 * stop things allocating the low memory; ideally we need a better
-	 * implementation of GFP_DMA which does not assume that DMA-able
-	 * memory starts at zero.
-	 */
-	if (machine_is_integrator() || machine_is_cintegrator())
-		res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
-
-	/*
-	 * These should likewise go elsewhere.  They pre-reserve the
-	 * screen memory region at the start of main system memory.
-	 */
-	if (machine_is_edb7211())
-		res_size = 0x00020000;
-	if (machine_is_p720t())
-		res_size = 0x00014000;
-
-	/* H1940, RX3715 and RX1950 need to reserve this for suspend */
-
-	if (machine_is_h1940() || machine_is_rx3715()
-		|| machine_is_rx1950()) {
-		reserve_bootmem_node(pgdat, 0x30003000, 0x1000,
-				BOOTMEM_DEFAULT);
-		reserve_bootmem_node(pgdat, 0x30081000, 0x1000,
-				BOOTMEM_DEFAULT);
-	}
-
-	if (machine_is_palmld() || machine_is_palmtx()) {
-		reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-	}
-
-	if (machine_is_treo680() || machine_is_centro()) {
-		reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-		reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-	}
-
-	if (machine_is_palmt5())
-		reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
-				BOOTMEM_EXCLUSIVE);
-
-	/*
-	 * U300 - This platform family can share physical memory
-	 * between two ARM cpus, one running Linux and the other
-	 * running another OS.
-	 */
-	if (machine_is_u300()) {
-#ifdef CONFIG_MACH_U300_SINGLE_RAM
-#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) &&	\
-	CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
-		res_size = 0x00100000;
-#endif
-#endif
-	}
+	memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
 
 #ifdef CONFIG_SA1111
 	/*
 	 * Because of the SA1111 DMA bug, we want to preserve our
 	 * precious DMA-able memory...
 	 */
-	res_size = __pa(swapper_pg_dir) - PHYS_OFFSET;
+	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
 #endif
-	if (res_size)
-		reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size,
-				BOOTMEM_DEFAULT);
 }
 
 /*
@@ -940,7 +919,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	/*
 	 * Allocate the vector page early.
 	 */
-	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+	vectors = early_alloc(PAGE_SIZE);
 
 	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
@@ -1011,45 +990,33 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 static void __init kmap_init(void)
 {
 #ifdef CONFIG_HIGHMEM
-	pmd_t *pmd = pmd_off_k(PKMAP_BASE);
-	pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t));
-	BUG_ON(!pmd_none(*pmd) || !pte);
-	__pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE);
-	pkmap_page_table = pte + PTRS_PER_PTE;
+	pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE),
+		PKMAP_BASE, _PAGE_KERNEL_TABLE);
 #endif
 }
 
-static inline void map_memory_bank(struct membank *bank)
-{
-	struct map_desc map;
-
-	map.pfn = bank_pfn_start(bank);
-	map.virtual = __phys_to_virt(bank_phys_start(bank));
-	map.length = bank_phys_size(bank);
-	map.type = MT_MEMORY;
-
-	create_mapping(&map);
-}
-
 static void __init map_lowmem(void)
 {
-	struct meminfo *mi = &meminfo;
-	int i;
+	struct memblock_region *reg;
 
 	/* Map all the lowmem memory banks. */
-	for (i = 0; i < mi->nr_banks; i++) {
-		struct membank *bank = &mi->bank[i];
+	for_each_memblock(memory, reg) {
+		phys_addr_t start = reg->base;
+		phys_addr_t end = start + reg->size;
+		struct map_desc map;
+
+		if (end > lowmem_limit)
+			end = lowmem_limit;
+		if (start >= end)
+			break;
 
-		if (!bank->highmem)
-			map_memory_bank(bank);
-	}
-}
+		map.pfn = __phys_to_pfn(start);
+		map.virtual = __phys_to_virt(start);
+		map.length = end - start;
+		map.type = MT_MEMORY;
 
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
-	const struct membank *a = _a, *b = _b;
-	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
-	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+		create_mapping(&map);
+	}
 }
 
 /*
@@ -1060,23 +1027,20 @@ void __init paging_init(struct machine_desc *mdesc)
 {
 	void *zero_page;
 
-	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
-
 	build_mem_type_table();
 	sanity_check_meminfo();
 	prepare_page_table();
 	map_lowmem();
-	bootmem_init();
 	devicemaps_init(mdesc);
 	kmap_init();
 
 	top_pmd = pmd_off_k(0xffff0000);
 
-	/*
-	 * allocate the zero page.  Note that this always succeeds and
-	 * returns a zeroed result.
-	 */
-	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
+	/* allocate the zero page. */
+	zero_page = early_alloc(PAGE_SIZE);
+
+	bootmem_init();
+
 	empty_zero_page = virt_to_page(zero_page);
 	__flush_dcache_page(NULL, empty_zero_page);
 }
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 33b327379f07..687d02319a41 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -6,8 +6,8 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/pagemap.h>
-#include <linux/bootmem.h>
 #include <linux/io.h>
+#include <linux/memblock.h>
 
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
@@ -17,30 +17,14 @@
 
 #include "mm.h"
 
-/*
- * Reserve the various regions of node 0
- */
-void __init reserve_node_zero(pg_data_t *pgdat)
+void __init arm_mm_memblock_reserve(void)
 {
 	/*
-	 * Register the kernel text and data with bootmem.
-	 * Note that this can only be in node 0.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	reserve_bootmem_node(pgdat, __pa(_data), _end - _data,
-			BOOTMEM_DEFAULT);
-#else
-	reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext,
-			BOOTMEM_DEFAULT);
-#endif
-
-	/*
 	 * Register the exception vector page.
 	 * some architectures which the DRAM is the exception vector to trap,
 	 * alloc_page breaks with error, although it is not NULL, but "0."
 	 */
-	reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE,
-			BOOTMEM_DEFAULT);
+	memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
 }
 
 /*
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index be5f58e153bf..69bbfc6645a6 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -57,9 +57,9 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 			goto no_pte;
 
 		init_pmd = pmd_offset(init_pgd, 0);
-		init_pte = pte_offset_map_nested(init_pmd, 0);
+		init_pte = pte_offset_map(init_pmd, 0);
 		set_pte_ext(new_pte, *init_pte, 0);
-		pte_unmap_nested(init_pte);
+		pte_unmap(init_pte);
 		pte_unmap(new_pte);
 	}
 
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 72507c630ceb..bcf748d9f4e2 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -79,15 +79,11 @@ ENTRY(cpu_arm1020_proc_init)
  * cpu_arm1020_proc_fin()
  */
 ENTRY(cpu_arm1020_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1020_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1020_reset(loc)
@@ -123,6 +119,20 @@ ENTRY(cpu_arm1020_do_idle)
 /* ================================= CACHE ================================ */
 
 	.align	5
+
+/*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1020_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+#endif
+	mov	pc, lr
+ENDPROC(arm1020_flush_icache_all)
+
 /*
  *	flush_user_cache_all()
  *
@@ -355,6 +365,7 @@ ENTRY(arm1020_dma_unmap_area)
 ENDPROC(arm1020_dma_unmap_area)
 
 ENTRY(arm1020_cache_fns)
+	.long	arm1020_flush_icache_all
 	.long	arm1020_flush_kern_cache_all
 	.long	arm1020_flush_user_cache_all
 	.long	arm1020_flush_user_cache_range
@@ -434,7 +445,7 @@ ENTRY(cpu_arm1020_set_pte_ext)
 #endif /* CONFIG_MMU */
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm1020_setup, #function
 __arm1020_setup:
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index d27829805609..ab7ec26657ea 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -79,15 +79,11 @@ ENTRY(cpu_arm1020e_proc_init)
  * cpu_arm1020e_proc_fin()
  */
 ENTRY(cpu_arm1020e_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1020e_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1020e_reset(loc)
@@ -123,6 +119,20 @@ ENTRY(cpu_arm1020e_do_idle)
 /* ================================= CACHE ================================ */
 
 	.align	5
+
+/*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1020e_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+#endif
+	mov	pc, lr
+ENDPROC(arm1020e_flush_icache_all)
+
 /*
  *	flush_user_cache_all()
  *
@@ -341,6 +351,7 @@ ENTRY(arm1020e_dma_unmap_area)
 ENDPROC(arm1020e_dma_unmap_area)
 
 ENTRY(arm1020e_cache_fns)
+	.long	arm1020e_flush_icache_all
 	.long	arm1020e_flush_kern_cache_all
 	.long	arm1020e_flush_user_cache_all
 	.long	arm1020e_flush_user_cache_range
@@ -416,7 +427,7 @@ ENTRY(cpu_arm1020e_set_pte_ext)
 #endif /* CONFIG_MMU */
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm1020e_setup, #function
 __arm1020e_setup:
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index ce13e4a827de..831c5e54e22f 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -68,15 +68,11 @@ ENTRY(cpu_arm1022_proc_init)
  * cpu_arm1022_proc_fin()
  */
 ENTRY(cpu_arm1022_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1022_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1022_reset(loc)
@@ -112,6 +108,20 @@ ENTRY(cpu_arm1022_do_idle)
 /* ================================= CACHE ================================ */
 
 	.align	5
+
+/*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1022_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+#endif
+	mov	pc, lr
+ENDPROC(arm1022_flush_icache_all)
+
 /*
  *	flush_user_cache_all()
  *
@@ -330,6 +340,7 @@ ENTRY(arm1022_dma_unmap_area)
 ENDPROC(arm1022_dma_unmap_area)
 
 ENTRY(arm1022_cache_fns)
+	.long	arm1022_flush_icache_all
 	.long	arm1022_flush_kern_cache_all
 	.long	arm1022_flush_user_cache_all
 	.long	arm1022_flush_user_cache_range
@@ -398,7 +409,7 @@ ENTRY(cpu_arm1022_set_pte_ext)
 #endif /* CONFIG_MMU */
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm1022_setup, #function
 __arm1022_setup:
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 636672a29c6d..e3f7e9a166bf 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -68,15 +68,11 @@ ENTRY(cpu_arm1026_proc_init)
  * cpu_arm1026_proc_fin()
  */
 ENTRY(cpu_arm1026_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm1026_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000 		@ ...i............
 	bic	r0, r0, #0x000e 		@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm1026_reset(loc)
@@ -112,6 +108,20 @@ ENTRY(cpu_arm1026_do_idle)
 /* ================================= CACHE ================================ */
 
 	.align	5
+
+/*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm1026_flush_icache_all)
+#ifndef CONFIG_CPU_ICACHE_DISABLE
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+#endif
+	mov	pc, lr
+ENDPROC(arm1026_flush_icache_all)
+
 /*
  *	flush_user_cache_all()
  *
@@ -324,6 +334,7 @@ ENTRY(arm1026_dma_unmap_area)
 ENDPROC(arm1026_dma_unmap_area)
 
 ENTRY(arm1026_cache_fns)
+	.long	arm1026_flush_icache_all
 	.long	arm1026_flush_kern_cache_all
 	.long	arm1026_flush_user_cache_all
 	.long	arm1026_flush_user_cache_range
@@ -388,7 +399,7 @@ ENTRY(cpu_arm1026_set_pte_ext)
 	mov	pc, lr
 
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm1026_setup, #function
 __arm1026_setup:
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 795dc615f43b..6a7be1863edd 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -184,8 +184,6 @@ ENTRY(cpu_arm7_proc_init)
 
 ENTRY(cpu_arm6_proc_fin)
 ENTRY(cpu_arm7_proc_fin)
-		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, r0
 		mov	r0, #0x31			@ ....S..DP...M
 		mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 		mov	pc, lr
@@ -240,7 +238,7 @@ ENTRY(cpu_arm7_reset)
 		mcr	p15, 0, r1, c1, c0, 0		@ turn off MMU etc
 		mov	pc, r0
 
-		__INIT
+		__CPUINIT
 
 		.type	__arm6_setup, #function
 __arm6_setup:	mov	r0, #0
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 0b62de244666..c285395f44b2 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -54,15 +54,11 @@ ENTRY(cpu_arm720_proc_init)
 		mov	pc, lr
 
 ENTRY(cpu_arm720_proc_fin)
-		stmfd	sp!, {lr}
-		mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, ip
 		mrc	p15, 0, r0, c1, c0, 0
 		bic	r0, r0, #0x1000			@ ...i............
 		bic	r0, r0, #0x000e			@ ............wca.
 		mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-		mcr	p15, 0, r1, c7, c7, 0		@ invalidate cache
-		ldmfd	sp!, {pc}
+		mov	pc, lr
 
 /*
  * Function: arm720_proc_do_idle(void)
@@ -117,7 +113,7 @@ ENTRY(cpu_arm720_reset)
 		mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 		mov	pc, r0
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm710_setup, #function
 __arm710_setup:
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 01860cdeb2ec..38b27dcba727 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -36,15 +36,11 @@ ENTRY(cpu_arm740_switch_mm)
  * cpu_arm740_proc_fin()
  */
 ENTRY(cpu_arm740_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
 	mrc	p15, 0, r0, c1, c0, 0
 	bic	r0, r0, #0x3f000000		@ bank/f/lock/s
 	bic	r0, r0, #0x0000000c		@ w-buffer/cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	mcr	p15, 0, r0, c7, c0, 0		@ invalidate cache
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm740_reset(loc)
@@ -59,7 +55,7 @@ ENTRY(cpu_arm740_reset)
 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
 	mov	pc, r0
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm740_setup, #function
 __arm740_setup:
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 1201b9863829..0c9786de20af 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -36,8 +36,6 @@ ENTRY(cpu_arm7tdmi_switch_mm)
  * cpu_arm7tdmi_proc_fin()
  */
 ENTRY(cpu_arm7tdmi_proc_fin)
-		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, r0
 		mov	pc, lr
 
 /*
@@ -48,7 +46,7 @@ ENTRY(cpu_arm7tdmi_proc_fin)
 ENTRY(cpu_arm7tdmi_reset)
 		mov	pc, r0
 
-		__INIT
+		__CPUINIT
 
 		.type	__arm7tdmi_setup, #function
 __arm7tdmi_setup:
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 8be81992645d..6109f278a904 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -69,19 +69,11 @@ ENTRY(cpu_arm920_proc_init)
  * cpu_arm920_proc_fin()
  */
 ENTRY(cpu_arm920_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	bl	arm920_flush_kern_cache_all
-#else
-	bl	v4wt_flush_kern_cache_all
-#endif
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm920_reset(loc)
@@ -118,6 +110,17 @@ ENTRY(cpu_arm920_do_idle)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm920_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(arm920_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Invalidate all cache entries in a particular address
@@ -313,6 +316,7 @@ ENTRY(arm920_dma_unmap_area)
 ENDPROC(arm920_dma_unmap_area)
 
 ENTRY(arm920_cache_fns)
+	.long	arm920_flush_icache_all
 	.long	arm920_flush_kern_cache_all
 	.long	arm920_flush_user_cache_all
 	.long	arm920_flush_user_cache_range
@@ -383,7 +387,7 @@ ENTRY(cpu_arm920_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm920_setup, #function
 __arm920_setup:
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index c0ff8e4b1074..bb2f0f46a5e6 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -71,19 +71,11 @@ ENTRY(cpu_arm922_proc_init)
  * cpu_arm922_proc_fin()
  */
 ENTRY(cpu_arm922_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	bl	arm922_flush_kern_cache_all
-#else
-	bl	v4wt_flush_kern_cache_all
-#endif
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm922_reset(loc)
@@ -120,6 +112,17 @@ ENTRY(cpu_arm922_do_idle)
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm922_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(arm922_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Clean and invalidate all cache entries in a particular
@@ -315,6 +318,7 @@ ENTRY(arm922_dma_unmap_area)
 ENDPROC(arm922_dma_unmap_area)
 
 ENTRY(arm922_cache_fns)
+	.long	arm922_flush_icache_all
 	.long	arm922_flush_kern_cache_all
 	.long	arm922_flush_user_cache_all
 	.long	arm922_flush_user_cache_range
@@ -387,7 +391,7 @@ ENTRY(cpu_arm922_set_pte_ext)
 #endif /* CONFIG_MMU */
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm922_setup, #function
 __arm922_setup:
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 3c6cffe400f6..c13e01accfe2 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -92,15 +92,11 @@ ENTRY(cpu_arm925_proc_init)
  * cpu_arm925_proc_fin()
  */
 ENTRY(cpu_arm925_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm925_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm925_reset(loc)
@@ -149,6 +145,17 @@ ENTRY(cpu_arm925_do_idle)
 	mov	pc, lr
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm925_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(arm925_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Clean and invalidate all cache entries in a particular
@@ -366,6 +373,7 @@ ENTRY(arm925_dma_unmap_area)
 ENDPROC(arm925_dma_unmap_area)
 
 ENTRY(arm925_cache_fns)
+	.long	arm925_flush_icache_all
 	.long	arm925_flush_kern_cache_all
 	.long	arm925_flush_user_cache_all
 	.long	arm925_flush_user_cache_range
@@ -432,7 +440,7 @@ ENTRY(cpu_arm925_set_pte_ext)
 #endif /* CONFIG_MMU */
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm925_setup, #function
 __arm925_setup:
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 75b707c9cce1..42eb4315740b 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -61,15 +61,11 @@ ENTRY(cpu_arm926_proc_init)
  * cpu_arm926_proc_fin()
  */
 ENTRY(cpu_arm926_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm926_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm926_reset(loc)
@@ -115,6 +111,17 @@ ENTRY(cpu_arm926_do_idle)
 	mov	pc, lr
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm926_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(arm926_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Clean and invalidate all cache entries in a particular
@@ -329,6 +336,7 @@ ENTRY(arm926_dma_unmap_area)
 ENDPROC(arm926_dma_unmap_area)
 
 ENTRY(arm926_cache_fns)
+	.long	arm926_flush_icache_all
 	.long	arm926_flush_kern_cache_all
 	.long	arm926_flush_user_cache_all
 	.long	arm926_flush_user_cache_range
@@ -393,7 +401,7 @@ ENTRY(cpu_arm926_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm926_setup, #function
 __arm926_setup:
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 1af1657819eb..7b11cdb9935f 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -37,15 +37,11 @@ ENTRY(cpu_arm940_switch_mm)
  * cpu_arm940_proc_fin()
  */
 ENTRY(cpu_arm940_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm940_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x00001000		@ i-cache
 	bic	r0, r0, #0x00000004		@ d-cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm940_reset(loc)
@@ -72,6 +68,17 @@ ENTRY(cpu_arm940_do_idle)
 	mov	pc, lr
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm940_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(arm940_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  */
 ENTRY(arm940_flush_user_cache_all)
@@ -258,6 +265,7 @@ ENTRY(arm940_dma_unmap_area)
 ENDPROC(arm940_dma_unmap_area)
 
 ENTRY(arm940_cache_fns)
+	.long	arm940_flush_icache_all
 	.long	arm940_flush_kern_cache_all
 	.long	arm940_flush_user_cache_all
 	.long	arm940_flush_user_cache_range
@@ -268,7 +276,7 @@ ENTRY(arm940_cache_fns)
 	.long	arm940_dma_unmap_area
 	.long	arm940_dma_flush_range
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm940_setup, #function
 __arm940_setup:
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 1664b6aaff79..1a5bbf080342 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -44,15 +44,11 @@ ENTRY(cpu_arm946_switch_mm)
  * cpu_arm946_proc_fin()
  */
 ENTRY(cpu_arm946_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	arm946_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x00001000		@ i-cache
 	bic	r0, r0, #0x00000004		@ d-cache
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_arm946_reset(loc)
@@ -79,6 +75,17 @@ ENTRY(cpu_arm946_do_idle)
 	mov	pc, lr
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(arm946_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(arm946_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  */
 ENTRY(arm946_flush_user_cache_all)
@@ -300,6 +307,7 @@ ENTRY(arm946_dma_unmap_area)
 ENDPROC(arm946_dma_unmap_area)
 
 ENTRY(arm946_cache_fns)
+	.long	arm946_flush_icache_all
 	.long	arm946_flush_kern_cache_all
 	.long	arm946_flush_user_cache_all
 	.long	arm946_flush_user_cache_range
@@ -321,7 +329,7 @@ ENTRY(cpu_arm946_dcache_clean_area)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__arm946_setup, #function
 __arm946_setup:
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index 28545c29dbcd..db67e3134d7a 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -36,8 +36,6 @@ ENTRY(cpu_arm9tdmi_switch_mm)
  * cpu_arm9tdmi_proc_fin()
  */
 ENTRY(cpu_arm9tdmi_proc_fin)
-		mov	r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-		msr	cpsr_c, r0
 		mov	pc, lr
 
 /*
@@ -48,7 +46,7 @@ ENTRY(cpu_arm9tdmi_proc_fin)
 ENTRY(cpu_arm9tdmi_reset)
 		mov	pc, r0
 
-		__INIT
+		__CPUINIT
 
 		.type	__arm9tdmi_setup, #function
 __arm9tdmi_setup:
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 08f5ac237ad4..7c9ad621f0e6 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -39,17 +39,13 @@ ENTRY(cpu_fa526_proc_init)
  * cpu_fa526_proc_fin()
  */
 ENTRY(cpu_fa526_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	fa_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
 	nop
 	nop
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_fa526_reset(loc)
@@ -138,7 +134,7 @@ ENTRY(cpu_fa526_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__fa526_setup, #function
 __fa526_setup:
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 53e632343849..b4597edbff97 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -75,11 +75,6 @@ ENTRY(cpu_feroceon_proc_init)
  * cpu_feroceon_proc_fin()
  */
 ENTRY(cpu_feroceon_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	feroceon_flush_kern_cache_all
-
 #if defined(CONFIG_CACHE_FEROCEON_L2) && \
 	!defined(CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH)
 	mov	r0, #0
@@ -91,7 +86,7 @@ ENTRY(cpu_feroceon_proc_fin)
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_feroceon_reset(loc)
@@ -129,6 +124,17 @@ ENTRY(cpu_feroceon_do_idle)
 	mov	pc, lr
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(feroceon_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(feroceon_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Clean and invalidate all cache entries in a particular
@@ -406,6 +412,7 @@ ENTRY(feroceon_dma_unmap_area)
 ENDPROC(feroceon_dma_unmap_area)
 
 ENTRY(feroceon_cache_fns)
+	.long	feroceon_flush_icache_all
 	.long	feroceon_flush_kern_cache_all
 	.long	feroceon_flush_user_cache_all
 	.long	feroceon_flush_user_cache_range
@@ -417,6 +424,7 @@ ENTRY(feroceon_cache_fns)
 	.long	feroceon_dma_flush_range
 
 ENTRY(feroceon_range_cache_fns)
+	.long	feroceon_flush_icache_all
 	.long	feroceon_flush_kern_cache_all
 	.long	feroceon_flush_user_cache_all
 	.long	feroceon_flush_user_cache_range
@@ -499,7 +507,7 @@ ENTRY(cpu_feroceon_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__feroceon_setup, #function
 __feroceon_setup:
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index caa31154e7db..4458ee6aa713 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -51,15 +51,11 @@ ENTRY(cpu_mohawk_proc_init)
  * cpu_mohawk_proc_fin()
  */
 ENTRY(cpu_mohawk_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	mohawk_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...iz...........
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_mohawk_reset(loc)
@@ -342,7 +338,7 @@ ENTRY(cpu_mohawk_set_pte_ext)
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__mohawk_setup, #function
 __mohawk_setup:
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 7b706b389906..5aa8d59c2e85 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -44,17 +44,13 @@ ENTRY(cpu_sa110_proc_init)
  * cpu_sa110_proc_fin()
  */
 ENTRY(cpu_sa110_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	v4wb_flush_kern_cache_all	@ clean caches
-1:	mov	r0, #0
+	mov	r0, #0
 	mcr	p15, 0, r0, c15, c2, 2		@ Disable clock switching
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_sa110_reset(loc)
@@ -160,7 +156,7 @@ ENTRY(cpu_sa110_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__sa110_setup, #function
 __sa110_setup:
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 5c47760c2064..2ac4e6f10713 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -55,16 +55,12 @@ ENTRY(cpu_sa1100_proc_init)
  *  - Clean and turn off caches.
  */
 ENTRY(cpu_sa1100_proc_fin)
-	stmfd	sp!, {lr}
-	mov	ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-	msr	cpsr_c, ip
-	bl	v4wb_flush_kern_cache_all
 	mcr	p15, 0, ip, c15, c2, 2		@ Disable clock switching
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x000e			@ ............wca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  * cpu_sa1100_reset(loc)
@@ -173,7 +169,7 @@ ENTRY(cpu_sa1100_set_pte_ext)
 #endif
 	mov	pc, lr
 
-	__INIT
+	__CPUINIT
 
 	.type	__sa1100_setup, #function
 __sa1100_setup:
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 7a5337ed7d68..59a7e1ffe7bc 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -30,26 +30,20 @@
 #define TTB_RGN_WT	(2 << 3)
 #define TTB_RGN_WB	(3 << 3)
 
-#ifndef CONFIG_SMP
-#define TTB_FLAGS	TTB_RGN_WBWA
-#define PMD_FLAGS	PMD_SECT_WB
-#else
-#define TTB_FLAGS	TTB_RGN_WBWA|TTB_S
-#define PMD_FLAGS	PMD_SECT_WBWA|PMD_SECT_S
-#endif
+#define TTB_FLAGS_UP	TTB_RGN_WBWA
+#define PMD_FLAGS_UP	PMD_SECT_WB
+#define TTB_FLAGS_SMP	TTB_RGN_WBWA|TTB_S
+#define PMD_FLAGS_SMP	PMD_SECT_WBWA|PMD_SECT_S
 
 ENTRY(cpu_v6_proc_init)
 	mov	pc, lr
 
 ENTRY(cpu_v6_proc_fin)
-	stmfd	sp!, {lr}
-	cpsid	if				@ disable interrupts
-	bl	v6_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 
 /*
  *	cpu_v6_reset(loc)
@@ -100,7 +94,8 @@ ENTRY(cpu_v6_switch_mm)
 #ifdef CONFIG_MMU
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-	orr	r0, r0, #TTB_FLAGS
+	ALT_SMP(orr	r0, r0, #TTB_FLAGS_SMP)
+	ALT_UP(orr	r0, r0, #TTB_FLAGS_UP)
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
 	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
@@ -140,7 +135,7 @@ cpu_pj4_name:
 
 	.align
 
-	__INIT
+	__CPUINIT
 
 /*
  *	__v6_setup
@@ -159,9 +154,11 @@ cpu_pj4_name:
  */
 __v6_setup:
 #ifdef CONFIG_SMP
-	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode
+	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)	@ Enable SMP/nAMP mode
+	ALT_UP(nop)
 	orr	r0, r0, #0x20
-	mcr	p15, 0, r0, c1, c0, 1
+	ALT_SMP(mcr	p15, 0, r0, c1, c0, 1)
+	ALT_UP(nop)
 #endif
 
 	mov	r0, #0
@@ -172,7 +169,8 @@ __v6_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
-	orr	r4, r4, #TTB_FLAGS
+	ALT_SMP(orr	r4, r4, #TTB_FLAGS_SMP)
+	ALT_UP(orr	r4, r4, #TTB_FLAGS_UP)
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 #endif /* CONFIG_MMU */
 	adr	r5, v6_crval
@@ -195,6 +193,8 @@ __v6_setup:
 v6_crval:
 	crval	clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
 
+	__INITDATA
+
 	.type	v6_processor_functions, #object
 ENTRY(v6_processor_functions)
 	.word	v6_early_abort
@@ -208,6 +208,8 @@ ENTRY(v6_processor_functions)
 	.word	cpu_v6_set_pte_ext
 	.size	v6_processor_functions, . - v6_processor_functions
 
+	.section ".rodata"
+
 	.type	cpu_arch_name, #object
 cpu_arch_name:
 	.asciz	"armv6"
@@ -228,10 +230,16 @@ cpu_elf_name:
 __v6_proc_info:
 	.long	0x0007b000
 	.long	0x0007f000
-	.long   PMD_TYPE_SECT | \
+	ALT_SMP(.long \
+		PMD_TYPE_SECT | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ | \
-		PMD_FLAGS
+		PMD_FLAGS_SMP)
+	ALT_UP(.long \
+		PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS_UP)
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
@@ -239,7 +247,8 @@ __v6_proc_info:
 	b	__v6_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
+	/* See also feat_v6_fixup() for HWCAP_TLS */
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA|HWCAP_TLS
 	.long	cpu_v6_name
 	.long	v6_processor_functions
 	.long	v6wbi_tlb_fns
@@ -251,10 +260,16 @@ __v6_proc_info:
 __pj4_v6_proc_info:
 	.long	0x560f5810
 	.long	0xff0ffff0
-	.long   PMD_TYPE_SECT | \
+	ALT_SMP(.long \
+		PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS_SMP)
+	ALT_UP(.long \
+		PMD_TYPE_SECT | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ | \
-		PMD_FLAGS
+		PMD_FLAGS_UP)
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
@@ -262,7 +277,7 @@ __pj4_v6_proc_info:
 	b	__v6_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
 	.long	cpu_pj4_name
 	.long	v6_processor_functions
 	.long	v6wbi_tlb_fns
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 7aaf88a3b7aa..53cbe2225153 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -30,29 +30,24 @@
 #define TTB_IRGN_WT	((1 << 0) | (0 << 6))
 #define TTB_IRGN_WB	((1 << 0) | (1 << 6))
 
-#ifndef CONFIG_SMP
 /* PTWs cacheable, inner WB not shareable, outer WB not shareable */
-#define TTB_FLAGS	TTB_IRGN_WB|TTB_RGN_OC_WB
-#define PMD_FLAGS	PMD_SECT_WB
-#else
+#define TTB_FLAGS_UP	TTB_IRGN_WB|TTB_RGN_OC_WB
+#define PMD_FLAGS_UP	PMD_SECT_WB
+
 /* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
-#define TTB_FLAGS	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
-#define PMD_FLAGS	PMD_SECT_WBWA|PMD_SECT_S
-#endif
+#define TTB_FLAGS_SMP	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
+#define PMD_FLAGS_SMP	PMD_SECT_WBWA|PMD_SECT_S
 
 ENTRY(cpu_v7_proc_init)
 	mov	pc, lr
 ENDPROC(cpu_v7_proc_init)
 
 ENTRY(cpu_v7_proc_fin)
-	stmfd	sp!, {lr}
-	cpsid	if				@ disable interrupts
-	bl	v7_flush_kern_cache_all
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1000			@ ...i............
 	bic	r0, r0, #0x0006			@ .............ca.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldmfd	sp!, {pc}
+	mov	pc, lr
 ENDPROC(cpu_v7_proc_fin)
 
 /*
@@ -108,7 +103,8 @@ ENTRY(cpu_v7_switch_mm)
 #ifdef CONFIG_MMU
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-	orr	r0, r0, #TTB_FLAGS
+	ALT_SMP(orr	r0, r0, #TTB_FLAGS_SMP)
+	ALT_UP(orr	r0, r0, #TTB_FLAGS_UP)
 #ifdef CONFIG_ARM_ERRATA_430973
 	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 #endif
@@ -172,7 +168,7 @@ cpu_v7_name:
 	.ascii	"ARMv7 Processor"
 	.align
 
-	__INIT
+	__CPUINIT
 
 /*
  *	__v7_setup
@@ -189,13 +185,15 @@ cpu_v7_name:
  *	It is assumed that:
  *	- cache type register is implemented
  */
-__v7_setup:
+__v7_ca9mp_setup:
 #ifdef CONFIG_SMP
-	mrc	p15, 0, r0, c1, c0, 1
+	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)
+	ALT_UP(mov	r0, #(1 << 6))		@ fake it for UP
 	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
 	orreq	r0, r0, #(1 << 6) | (1 << 0)	@ Enable SMP/nAMP mode and
 	mcreq	p15, 0, r0, c1, c0, 1		@ TLB ops broadcasting
 #endif
+__v7_setup:
 	adr	r12, __v7_setup_stack		@ the local stack
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
@@ -204,11 +202,16 @@ __v7_setup:
 	mrc	p15, 0, r0, c0, c0, 0		@ read main ID register
 	and	r10, r0, #0xff000000		@ ARM?
 	teq	r10, #0x41000000
-	bne	2f
+	bne	3f
 	and	r5, r0, #0x00f00000		@ variant
 	and	r6, r0, #0x0000000f		@ revision
-	orr	r0, r6, r5, lsr #20-4		@ combine variant and revision
+	orr	r6, r6, r5, lsr #20-4		@ combine variant and revision
+	ubfx	r0, r0, #4, #12			@ primary part number
 
+	/* Cortex-A8 Errata */
+	ldr	r10, =0x00000c08		@ Cortex-A8 primary part number
+	teq	r0, r10
+	bne	2f
 #ifdef CONFIG_ARM_ERRATA_430973
 	teq	r5, #0x00100000			@ only present in r1p*
 	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
@@ -216,21 +219,50 @@ __v7_setup:
 	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
-	teq	r0, #0x20			@ only present in r2p0
+	teq	r6, #0x20			@ only present in r2p0
 	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
 	orreq	r10, r10, #(1 << 5)		@ set L1NEON to 1
 	orreq	r10, r10, #(1 << 9)		@ set PLDNOP to 1
 	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
-	teq	r0, #0x20			@ only present in r2p0
+	teq	r6, #0x20			@ only present in r2p0
 	mrceq	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
 	tsteq	r10, #1 << 22
 	orreq	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
 	mcreq	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
 #endif
+	b	3f
+
+	/* Cortex-A9 Errata */
+2:	ldr	r10, =0x00000c09		@ Cortex-A9 primary part number
+	teq	r0, r10
+	bne	3f
+#ifdef CONFIG_ARM_ERRATA_742230
+	cmp	r6, #0x22			@ only present up to r2p2
+	mrcle	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orrle	r10, r10, #1 << 4		@ set bit #4
+	mcrle	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_742231
+	teq	r6, #0x20			@ present in r2p0
+	teqne	r6, #0x21			@ present in r2p1
+	teqne	r6, #0x22			@ present in r2p2
+	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orreq	r10, r10, #1 << 12		@ set bit #12
+	orreq	r10, r10, #1 << 22		@ set bit #22
+	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
+#ifdef CONFIG_ARM_ERRATA_743622
+	teq	r6, #0x20			@ present in r2p0
+	teqne	r6, #0x21			@ present in r2p1
+	teqne	r6, #0x22			@ present in r2p2
+	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orreq	r10, r10, #1 << 6		@ set bit #6
+	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
 
-2:	mov	r10, #0
+3:	mov	r10, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 #endif
@@ -238,7 +270,8 @@ __v7_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r10, c2, c0, 2		@ TTB control register
-	orr	r4, r4, #TTB_FLAGS
+	ALT_SMP(orr	r4, r4, #TTB_FLAGS_SMP)
+	ALT_UP(orr	r4, r4, #TTB_FLAGS_UP)
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
@@ -300,6 +333,8 @@ v7_crval:
 __v7_setup_stack:
 	.space	4 * 11				@ 11 registers
 
+	__INITDATA
+
 	.type	v7_processor_functions, #object
 ENTRY(v7_processor_functions)
 	.word	v7_early_abort
@@ -313,6 +348,8 @@ ENTRY(v7_processor_functions)
 	.word	cpu_v7_set_pte_ext
 	.size	v7_processor_functions, . - v7_processor_functions
 
+	.section ".rodata"
+
 	.type	cpu_arch_name, #object
 cpu_arch_name:
 	.asciz	"armv7"
@@ -326,6 +363,35 @@ cpu_elf_name:
 
 	.section ".proc.info.init", #alloc, #execinstr
 
+	.type   __v7_ca9mp_proc_info, #object
+__v7_ca9mp_proc_info:
+	.long	0x410fc090		@ Required ID value
+	.long	0xff0ffff0		@ Mask for ID
+	ALT_SMP(.long \
+		PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS_SMP)
+	ALT_UP(.long \
+		PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS_UP)
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_XN | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__v7_ca9mp_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
+	.long	cpu_v7_name
+	.long	v7_processor_functions
+	.long	v7wbi_tlb_fns
+	.long	v6_user_fns
+	.long	v7_cache_fns
+	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+
 	/*
 	 * Match any ARMv7 processor core.
 	 */
@@ -333,10 +399,16 @@ cpu_elf_name:
 __v7_proc_info:
 	.long	0x000f0000		@ Required ID value
 	.long	0x000f0000		@ Mask for ID
-	.long   PMD_TYPE_SECT | \
+	ALT_SMP(.long \
+		PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS_SMP)
+	ALT_UP(.long \
+		PMD_TYPE_SECT | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ | \
-		PMD_FLAGS
+		PMD_FLAGS_UP)
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
@@ -344,7 +416,7 @@ __v7_proc_info:
 	b	__v7_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
 	.long	cpu_v7_name
 	.long	v7_processor_functions
 	.long	v7wbi_tlb_fns
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index e5797f1c1db7..ec26355cb7c2 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -90,15 +90,11 @@ ENTRY(cpu_xsc3_proc_init)
  * cpu_xsc3_proc_fin()
  */
 ENTRY(cpu_xsc3_proc_fin)
-	str	lr, [sp, #-4]!
-	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
-	msr	cpsr_c, r0
-	bl	xsc3_flush_kern_cache_all	@ clean caches
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...IZ...........
 	bic	r0, r0, #0x0006			@ .............CA.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldr	pc, [sp], #4
+	mov	pc, lr
 
 /*
  * cpu_xsc3_reset(loc)
@@ -145,6 +141,17 @@ ENTRY(cpu_xsc3_do_idle)
 /* ================================= CACHE ================================ */
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(xsc3_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(xsc3_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Invalidate all cache entries in a particular address
@@ -329,6 +336,7 @@ ENTRY(xsc3_dma_unmap_area)
 ENDPROC(xsc3_dma_unmap_area)
 
 ENTRY(xsc3_cache_fns)
+	.long	xsc3_flush_icache_all
 	.long	xsc3_flush_kern_cache_all
 	.long	xsc3_flush_user_cache_all
 	.long	xsc3_flush_user_cache_range
@@ -408,7 +416,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
 
 	.align
 
-	__INIT
+	__CPUINIT
 
 	.type	__xsc3_setup, #function
 __xsc3_setup:
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 63037e2162f2..523408c0bb38 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -124,15 +124,11 @@ ENTRY(cpu_xscale_proc_init)
  * cpu_xscale_proc_fin()
  */
 ENTRY(cpu_xscale_proc_fin)
-	str	lr, [sp, #-4]!
-	mov	r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
-	msr	cpsr_c, r0
-	bl	xscale_flush_kern_cache_all	@ clean caches
 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
 	bic	r0, r0, #0x1800			@ ...IZ...........
 	bic	r0, r0, #0x0006			@ .............CA.
 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
-	ldr	pc, [sp], #4
+	mov	pc, lr
 
 /*
  * cpu_xscale_reset(loc)
@@ -185,6 +181,17 @@ ENTRY(cpu_xscale_do_idle)
 /* ================================= CACHE ================================ */
 
 /*
+ *	flush_icache_all()
+ *
+ *	Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(xscale_flush_icache_all)
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
+	mov	pc, lr
+ENDPROC(xscale_flush_icache_all)
+
+/*
  *	flush_user_cache_all()
  *
  *	Invalidate all cache entries in a particular address
@@ -401,6 +408,7 @@ ENTRY(xscale_dma_unmap_area)
 ENDPROC(xscale_dma_unmap_area)
 
 ENTRY(xscale_cache_fns)
+	.long	xscale_flush_icache_all
 	.long	xscale_flush_kern_cache_all
 	.long	xscale_flush_user_cache_all
 	.long	xscale_flush_user_cache_range
@@ -510,7 +518,7 @@ ENTRY(cpu_xscale_set_pte_ext)
 
 	.align
 
-	__INIT
+	__CPUINIT
 
 	.type	__xscale_setup, #function
 __xscale_setup:
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index f3f288a9546d..53cd5b454673 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -13,6 +13,7 @@
  */
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/page.h>
 #include <asm/tlbflush.h>
@@ -41,20 +42,15 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
 	mov	r1, r1, lsl #PAGE_SHIFT
 1:
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable) 
-#else
-	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
-#endif
+	ALT_SMP(mcr	p15, 0, r0, c8, c3, 1)	@ TLB invalidate U MVA (shareable)
+	ALT_UP(mcr	p15, 0, r0, c8, c7, 1)	@ TLB invalidate U MVA
+
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
 	mov	ip, #0
-#ifdef CONFIG_SMP
-	mcr	p15, 0, ip, c7, c1, 6		@ flush BTAC/BTB Inner Shareable
-#else
-	mcr	p15, 0, ip, c7, c5, 6		@ flush BTAC/BTB
-#endif
+	ALT_SMP(mcr	p15, 0, ip, c7, c1, 6)	@ flush BTAC/BTB Inner Shareable
+	ALT_UP(mcr	p15, 0, ip, c7, c5, 6)	@ flush BTAC/BTB
 	dsb
 	mov	pc, lr
 ENDPROC(v7wbi_flush_user_tlb_range)
@@ -74,20 +70,14 @@ ENTRY(v7wbi_flush_kern_tlb_range)
 	mov	r0, r0, lsl #PAGE_SHIFT
 	mov	r1, r1, lsl #PAGE_SHIFT
 1:
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable)
-#else
-	mcr	p15, 0, r0, c8, c7, 1		@ TLB invalidate U MVA
-#endif
+	ALT_SMP(mcr	p15, 0, r0, c8, c3, 1)	@ TLB invalidate U MVA (shareable)
+	ALT_UP(mcr	p15, 0, r0, c8, c7, 1)	@ TLB invalidate U MVA
 	add	r0, r0, #PAGE_SZ
 	cmp	r0, r1
 	blo	1b
 	mov	r2, #0
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r2, c7, c1, 6		@ flush BTAC/BTB Inner Shareable
-#else
-	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
-#endif
+	ALT_SMP(mcr	p15, 0, r2, c7, c1, 6)	@ flush BTAC/BTB Inner Shareable
+	ALT_UP(mcr	p15, 0, r2, c7, c5, 6)	@ flush BTAC/BTB
 	dsb
 	isb
 	mov	pc, lr
@@ -99,5 +89,6 @@ ENDPROC(v7wbi_flush_kern_tlb_range)
 ENTRY(v7wbi_tlb_fns)
 	.long	v7wbi_flush_user_tlb_range
 	.long	v7wbi_flush_kern_tlb_range
-	.long	v7wbi_tlb_flags
+	ALT_SMP(.long	v7wbi_tlb_flags_smp)
+	ALT_UP(.long	v7wbi_tlb_flags_up)
 	.size	v7wbi_tlb_fns, . - v7wbi_tlb_fns
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
index 19e09bdb1b8a..935993e1b1ef 100644
--- a/arch/arm/mm/vmregion.c
+++ b/arch/arm/mm/vmregion.c
@@ -35,7 +35,8 @@
  */
 
 struct arm_vmregion *
-arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
+arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align,
+		   size_t size, gfp_t gfp)
 {
 	unsigned long addr = head->vm_start, end = head->vm_end - size;
 	unsigned long flags;
@@ -58,7 +59,7 @@ arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
 			goto nospc;
 		if ((addr + size) <= c->vm_start)
 			goto found;
-		addr = c->vm_end;
+		addr = ALIGN(c->vm_end, align);
 		if (addr > end)
 			goto nospc;
 	}
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
index 6b2cdbdf3a85..15e9f044db9f 100644
--- a/arch/arm/mm/vmregion.h
+++ b/arch/arm/mm/vmregion.h
@@ -21,7 +21,7 @@ struct arm_vmregion {
 	int			vm_active;
 };
 
-struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t);
+struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t);
 struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
 struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
 void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
diff --git a/arch/arm/nwfpe/milieu.h b/arch/arm/nwfpe/milieu.h
index a3892ab2dca4..09a4f2ddeb77 100644
--- a/arch/arm/nwfpe/milieu.h
+++ b/arch/arm/nwfpe/milieu.h
@@ -12,8 +12,8 @@ National Science Foundation under grant MIP-9311980.  The original version
 of this code was written as part of a project to build a fixed-point vector
 processor in collaboration with the University of California at Berkeley,
 overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/softfloat.html'.
+is available through the Web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
 
 THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
 has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
diff --git a/arch/arm/nwfpe/softfloat-macros b/arch/arm/nwfpe/softfloat-macros
index 5a060f95a58f..cf2a6173149e 100644
--- a/arch/arm/nwfpe/softfloat-macros
+++ b/arch/arm/nwfpe/softfloat-macros
@@ -12,8 +12,8 @@ National Science Foundation under grant MIP-9311980.  The original version
 of this code was written as part of a project to build a fixed-point vector
 processor in collaboration with the University of California at Berkeley,
 overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/softfloat.html'.
+is available through the web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
 
 THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
 has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
diff --git a/arch/arm/nwfpe/softfloat-specialize b/arch/arm/nwfpe/softfloat-specialize
index d4a4c8e06635..679a0269dd25 100644
--- a/arch/arm/nwfpe/softfloat-specialize
+++ b/arch/arm/nwfpe/softfloat-specialize
@@ -12,8 +12,8 @@ National Science Foundation under grant MIP-9311980.  The original version
 of this code was written as part of a project to build a fixed-point vector
 processor in collaboration with the University of California at Berkeley,
 overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/softfloat.html'.
+is available through the Web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
 
 THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
 has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c
index 0f9656e482ba..ffa6b438786b 100644
--- a/arch/arm/nwfpe/softfloat.c
+++ b/arch/arm/nwfpe/softfloat.c
@@ -11,8 +11,8 @@ National Science Foundation under grant MIP-9311980.  The original version
 of this code was written as part of a project to build a fixed-point vector
 processor in collaboration with the University of California at Berkeley,
 overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/softfloat.html'.
+is available through the web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
 
 THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
 has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h
index 13e479c5da57..df4d243a2b7c 100644
--- a/arch/arm/nwfpe/softfloat.h
+++ b/arch/arm/nwfpe/softfloat.h
@@ -12,8 +12,8 @@ National Science Foundation under grant MIP-9311980.  The original version
 of this code was written as part of a project to build a fixed-point vector
 processor in collaboration with the University of California at Berkeley,
 overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
-is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
-arithmetic/softfloat.html'.
+is available through the Web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
 
 THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
 has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index e666eafed152..b2215c61cdf0 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -6,4 +6,8 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 		oprofilefs.o oprofile_stats.o \
 		timer_int.o )
 
+ifeq ($(CONFIG_HW_PERF_EVENTS),y)
+DRIVER_OBJS += $(addprefix ../../../drivers/oprofile/, oprofile_perf.o)
+endif
+
 oprofile-y				:= $(DRIVER_OBJS) common.o
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 0691176899ff..8aa974491dfc 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -25,138 +25,10 @@
 #include <asm/ptrace.h>
 
 #ifdef CONFIG_HW_PERF_EVENTS
-/*
- * Per performance monitor configuration as set via oprofilefs.
- */
-struct op_counter_config {
-	unsigned long count;
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long unit_mask;
-	unsigned long kernel;
-	unsigned long user;
-	struct perf_event_attr attr;
-};
-
-static int op_arm_enabled;
-static DEFINE_MUTEX(op_arm_mutex);
-
-static struct op_counter_config *counter_config;
-static struct perf_event **perf_events[nr_cpumask_bits];
-static int perf_num_counters;
-
-/*
- * Overflow callback for oprofile.
- */
-static void op_overflow_handler(struct perf_event *event, int unused,
-			struct perf_sample_data *data, struct pt_regs *regs)
-{
-	int id;
-	u32 cpu = smp_processor_id();
-
-	for (id = 0; id < perf_num_counters; ++id)
-		if (perf_events[cpu][id] == event)
-			break;
-
-	if (id != perf_num_counters)
-		oprofile_add_sample(regs, id);
-	else
-		pr_warning("oprofile: ignoring spurious overflow "
-				"on cpu %u\n", cpu);
-}
-
-/*
- * Called by op_arm_setup to create perf attributes to mirror the oprofile
- * settings in counter_config. Attributes are created as `pinned' events and
- * so are permanently scheduled on the PMU.
- */
-static void op_perf_setup(void)
-{
-	int i;
-	u32 size = sizeof(struct perf_event_attr);
-	struct perf_event_attr *attr;
-
-	for (i = 0; i < perf_num_counters; ++i) {
-		attr = &counter_config[i].attr;
-		memset(attr, 0, size);
-		attr->type		= PERF_TYPE_RAW;
-		attr->size		= size;
-		attr->config		= counter_config[i].event;
-		attr->sample_period	= counter_config[i].count;
-		attr->pinned		= 1;
-	}
-}
-
-static int op_create_counter(int cpu, int event)
-{
-	int ret = 0;
-	struct perf_event *pevent;
-
-	if (!counter_config[event].enabled || (perf_events[cpu][event] != NULL))
-		return ret;
-
-	pevent = perf_event_create_kernel_counter(&counter_config[event].attr,
-						  cpu, -1,
-						  op_overflow_handler);
-
-	if (IS_ERR(pevent)) {
-		ret = PTR_ERR(pevent);
-	} else if (pevent->state != PERF_EVENT_STATE_ACTIVE) {
-		pr_warning("oprofile: failed to enable event %d "
-				"on CPU %d\n", event, cpu);
-		ret = -EBUSY;
-	} else {
-		perf_events[cpu][event] = pevent;
-	}
-
-	return ret;
-}
-
-static void op_destroy_counter(int cpu, int event)
-{
-	struct perf_event *pevent = perf_events[cpu][event];
-
-	if (pevent) {
-		perf_event_release_kernel(pevent);
-		perf_events[cpu][event] = NULL;
-	}
-}
-
-/*
- * Called by op_arm_start to create active perf events based on the
- * perviously configured attributes.
- */
-static int op_perf_start(void)
-{
-	int cpu, event, ret = 0;
-
-	for_each_online_cpu(cpu) {
-		for (event = 0; event < perf_num_counters; ++event) {
-			ret = op_create_counter(cpu, event);
-			if (ret)
-				goto out;
-		}
-	}
-
-out:
-	return ret;
-}
-
-/*
- * Called by op_arm_stop at the end of a profiling run.
- */
-static void op_perf_stop(void)
+char *op_name_from_perf_id(void)
 {
-	int cpu, event;
+	enum arm_perf_pmu_ids id = armpmu_get_pmu_id();
 
-	for_each_online_cpu(cpu)
-		for (event = 0; event < perf_num_counters; ++event)
-			op_destroy_counter(cpu, event);
-}
-
-
-static char *op_name_from_perf_id(enum arm_perf_pmu_ids id)
-{
 	switch (id) {
 	case ARM_PERF_PMU_ID_XSCALE1:
 		return "arm/xscale1";
@@ -175,116 +47,6 @@ static char *op_name_from_perf_id(enum arm_perf_pmu_ids id)
 	}
 }
 
-static int op_arm_create_files(struct super_block *sb, struct dentry *root)
-{
-	unsigned int i;
-
-	for (i = 0; i < perf_num_counters; i++) {
-		struct dentry *dir;
-		char buf[4];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(sb, root, buf);
-		oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled);
-		oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event);
-		oprofilefs_create_ulong(sb, dir, "count", &counter_config[i].count);
-		oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
-		oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
-		oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
-	}
-
-	return 0;
-}
-
-static int op_arm_setup(void)
-{
-	spin_lock(&oprofilefs_lock);
-	op_perf_setup();
-	spin_unlock(&oprofilefs_lock);
-	return 0;
-}
-
-static int op_arm_start(void)
-{
-	int ret = -EBUSY;
-
-	mutex_lock(&op_arm_mutex);
-	if (!op_arm_enabled) {
-		ret = 0;
-		op_perf_start();
-		op_arm_enabled = 1;
-	}
-	mutex_unlock(&op_arm_mutex);
-	return ret;
-}
-
-static void op_arm_stop(void)
-{
-	mutex_lock(&op_arm_mutex);
-	if (op_arm_enabled)
-		op_perf_stop();
-	op_arm_enabled = 0;
-	mutex_unlock(&op_arm_mutex);
-}
-
-#ifdef CONFIG_PM
-static int op_arm_suspend(struct platform_device *dev, pm_message_t state)
-{
-	mutex_lock(&op_arm_mutex);
-	if (op_arm_enabled)
-		op_perf_stop();
-	mutex_unlock(&op_arm_mutex);
-	return 0;
-}
-
-static int op_arm_resume(struct platform_device *dev)
-{
-	mutex_lock(&op_arm_mutex);
-	if (op_arm_enabled && op_perf_start())
-		op_arm_enabled = 0;
-	mutex_unlock(&op_arm_mutex);
-	return 0;
-}
-
-static struct platform_driver oprofile_driver = {
-	.driver		= {
-		.name		= "arm-oprofile",
-	},
-	.resume		= op_arm_resume,
-	.suspend	= op_arm_suspend,
-};
-
-static struct platform_device *oprofile_pdev;
-
-static int __init init_driverfs(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&oprofile_driver);
-	if (ret)
-		goto out;
-
-	oprofile_pdev =	platform_device_register_simple(
-				oprofile_driver.driver.name, 0, NULL, 0);
-	if (IS_ERR(oprofile_pdev)) {
-		ret = PTR_ERR(oprofile_pdev);
-		platform_driver_unregister(&oprofile_driver);
-	}
-
-out:
-	return ret;
-}
-
-static void  exit_driverfs(void)
-{
-	platform_device_unregister(oprofile_pdev);
-	platform_driver_unregister(&oprofile_driver);
-}
-#else
-static int __init init_driverfs(void) { return 0; }
-#define exit_driverfs() do { } while (0)
-#endif /* CONFIG_PM */
-
 static int report_trace(struct stackframe *frame, void *d)
 {
 	unsigned int *depth = d;
@@ -349,72 +111,14 @@ static void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
 
 int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
-	int cpu, ret = 0;
-
-	perf_num_counters = armpmu_get_max_events();
-
-	counter_config = kcalloc(perf_num_counters,
-			sizeof(struct op_counter_config), GFP_KERNEL);
-
-	if (!counter_config) {
-		pr_info("oprofile: failed to allocate %d "
-				"counters\n", perf_num_counters);
-		return -ENOMEM;
-	}
-
-	ret = init_driverfs();
-	if (ret) {
-		kfree(counter_config);
-		return ret;
-	}
-
-	for_each_possible_cpu(cpu) {
-		perf_events[cpu] = kcalloc(perf_num_counters,
-				sizeof(struct perf_event *), GFP_KERNEL);
-		if (!perf_events[cpu]) {
-			pr_info("oprofile: failed to allocate %d perf events "
-					"for cpu %d\n", perf_num_counters, cpu);
-			while (--cpu >= 0)
-				kfree(perf_events[cpu]);
-			return -ENOMEM;
-		}
-	}
-
 	ops->backtrace		= arm_backtrace;
-	ops->create_files	= op_arm_create_files;
-	ops->setup		= op_arm_setup;
-	ops->start		= op_arm_start;
-	ops->stop		= op_arm_stop;
-	ops->shutdown		= op_arm_stop;
-	ops->cpu_type		= op_name_from_perf_id(armpmu_get_pmu_id());
-
-	if (!ops->cpu_type)
-		ret = -ENODEV;
-	else
-		pr_info("oprofile: using %s\n", ops->cpu_type);
 
-	return ret;
+	return oprofile_perf_init(ops);
 }
 
-void oprofile_arch_exit(void)
+void __exit oprofile_arch_exit(void)
 {
-	int cpu, id;
-	struct perf_event *event;
-
-	if (*perf_events) {
-		exit_driverfs();
-		for_each_possible_cpu(cpu) {
-			for (id = 0; id < perf_num_counters; ++id) {
-				event = perf_events[cpu][id];
-				if (event != NULL)
-					perf_event_release_kernel(event);
-			}
-			kfree(perf_events[cpu]);
-		}
-	}
-
-	if (counter_config)
-		kfree(counter_config);
+	oprofile_perf_exit();
 }
 #else
 int __init oprofile_arch_init(struct oprofile_operations *ops)
@@ -422,5 +126,5 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	pr_info("oprofile: hardware counters not available\n");
 	return -ENODEV;
 }
-void oprofile_arch_exit(void) {}
+void __exit oprofile_arch_exit(void) {}
 #endif /* CONFIG_HW_PERF_EVENTS */
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index ce31f316ac75..43f2b158237c 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -359,7 +359,7 @@ static void __init iop3xx_atu_debug(void)
 	DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
 	DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
 
-	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort");
+	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
 }
 
 /* for platforms that might be host-bus-adapters */
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 6c8a02ad98e3..85d3e55ca4a9 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -29,6 +29,11 @@
 #include <mach/time.h>
 
 /*
+ * Minimum clocksource/clockevent timer range in seconds
+ */
+#define IOP_MIN_RANGE 4
+
+/*
  * IOP clocksource (free-running timer 1).
  */
 static cycle_t iop_clocksource_read(struct clocksource *unused)
@@ -44,27 +49,6 @@ static struct clocksource iop_clocksource = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int hz)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find shift and mult values for hz. */
-	shift = 32;
-	do {
-		temp = (u64) NSEC_PER_SEC << shift;
-		do_div(temp, hz);
-		if ((temp >> 32) == 0)
-			break;
-	} while (--shift != 0);
-
-	cs->shift = shift;
-	cs->mult = (u32) temp;
-
-	printk(KERN_INFO "clocksource: %s uses shift %u mult %#x\n",
-	       cs->name, cs->shift, cs->mult);
-}
-
 /*
  * IOP sched_clock() implementation via its clocksource.
  */
@@ -130,27 +114,6 @@ static struct clock_event_device iop_clockevent = {
 	.set_mode	= iop_set_mode,
 };
 
-static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find shift and mult values for hz. */
-	shift = 32;
-	do {
-		temp = (u64) hz << shift;
-		do_div(temp, NSEC_PER_SEC);
-		if ((temp >> 32) == 0)
-			break;
-	} while (--shift != 0);
-
-	ce->shift = shift;
-	ce->mult = (u32) temp;
-
-	printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n",
-	       ce->name, ce->shift, ce->mult);
-}
-
 static irqreturn_t
 iop_timer_interrupt(int irq, void *dev_id)
 {
@@ -190,7 +153,8 @@ void __init iop_init_time(unsigned long tick_rate)
 	 */
 	write_tmr0(timer_ctl & ~IOP_TMR_EN);
 	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
-	iop_clockevent_set_hz(&iop_clockevent, tick_rate);
+	clockevents_calc_mult_shift(&iop_clockevent,
+				    tick_rate, IOP_MIN_RANGE);
 	iop_clockevent.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &iop_clockevent);
 	iop_clockevent.min_delta_ns =
@@ -207,6 +171,7 @@ void __init iop_init_time(unsigned long tick_rate)
 	write_trr1(0xffffffff);
 	write_tcr1(0xffffffff);
 	write_tmr1(timer_ctl);
-	iop_clocksource_set_hz(&iop_clocksource, tick_rate);
+	clocksource_calc_mult_shift(&iop_clocksource, tick_rate,
+				    IOP_MIN_RANGE);
 	clocksource_register(&iop_clocksource);
 }
diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c
new file mode 100644
index 000000000000..639c54a07992
--- /dev/null
+++ b/arch/arm/plat-mxc/3ds_debugboard.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+
+#include <mach/hardware.h>
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR(n)	(n + 0x0)
+/* External UART */
+#define UARTA_BASE_ADDR(n)	(n + 0x8000)
+#define UARTB_BASE_ADDR(n)	(n + 0x10000)
+
+#define BOARD_IO_ADDR(n)	(n + 0x20000)
+/* LED switchs */
+#define LED_SWITCH_REG		0x00
+/* buttons */
+#define SWITCH_BUTTONS_REG	0x08
+/* status, interrupt */
+#define INTR_STATUS_REG	0x10
+#define INTR_MASK_REG		0x38
+#define INTR_RESET_REG		0x20
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER1_REG	0x40
+#define MAGIC_NUMBER2_REG	0x48
+/* CPLD code version */
+#define CPLD_CODE_VER_REG	0x50
+/* magic word for debug CPLD */
+#define MAGIC_NUMBER3_REG	0x58
+/* module reset register*/
+#define MODULE_RESET_REG	0x60
+/* CPU ID and Personality ID */
+#define MCU_BOARD_ID_REG	0x68
+
+#define MXC_IRQ_TO_EXPIO(irq)   ((irq) - MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_GPIO(irq)	((irq) - MXC_INTERNAL_IRQS)
+
+#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
+#define MXC_MAX_EXP_IO_LINES	16
+
+/* interrupts like external uart , external ethernet etc*/
+#define EXPIO_INT_ENET		(MXC_BOARD_IRQ_START + 0)
+#define EXPIO_INT_XUART_A	(MXC_BOARD_IRQ_START + 1)
+#define EXPIO_INT_XUART_B	(MXC_BOARD_IRQ_START + 2)
+#define EXPIO_INT_BUTTON_A	(MXC_BOARD_IRQ_START + 3)
+#define EXPIO_INT_BUTTON_B	(MXC_BOARD_IRQ_START + 4)
+
+static void __iomem *brd_io;
+static void expio_ack_irq(u32 irq);
+
+static struct resource smsc911x_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+	} , {
+		.start = EXPIO_INT_ENET,
+		.end = EXPIO_INT_ENET,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc_lan9217_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+};
+
+static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	u32 imr_val;
+	u32 int_valid;
+	u32 expio_irq;
+
+	desc->chip->mask(irq);	/* irq = gpio irq number */
+
+	imr_val = __raw_readw(brd_io + INTR_MASK_REG);
+	int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
+
+	expio_irq = MXC_BOARD_IRQ_START;
+	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+		struct irq_desc *d;
+		if ((int_valid & 1) == 0)
+			continue;
+		d = irq_desc + expio_irq;
+		if (unlikely(!(d->handle_irq)))
+			pr_err("\nEXPIO irq: %d unhandled\n", expio_irq);
+		else
+			d->handle_irq(expio_irq, d);
+	}
+
+	desc->chip->ack(irq);
+	desc->chip->unmask(irq);
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * Irq is an expio virtual irq number
+ */
+static void expio_mask_irq(u32 irq)
+{
+	u16 reg;
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg |= (1 << expio);
+	__raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static void expio_ack_irq(u32 irq)
+{
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+	__raw_writew(1 << expio, brd_io + INTR_RESET_REG);
+	__raw_writew(0, brd_io + INTR_RESET_REG);
+	expio_mask_irq(irq);
+}
+
+static void expio_unmask_irq(u32 irq)
+{
+	u16 reg;
+	u32 expio = MXC_IRQ_TO_EXPIO(irq);
+
+	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg &= ~(1 << expio);
+	__raw_writew(reg, brd_io + INTR_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+	.ack = expio_ack_irq,
+	.mask = expio_mask_irq,
+	.unmask = expio_unmask_irq,
+};
+
+int __init mxc_expio_init(u32 base, u32 p_irq)
+{
+	int i;
+
+	brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K);
+	if (brd_io == NULL)
+		return -ENOMEM;
+
+	if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
+		pr_info("3-Stack Debug board not detected\n");
+		iounmap(brd_io);
+		brd_io = NULL;
+		return -ENODEV;
+	}
+
+	pr_info("3-Stack Debug board detected, rev = 0x%04X\n",
+		readw(brd_io + CPLD_CODE_VER_REG));
+
+	/*
+	 * Configure INT line as GPIO input
+	 */
+	gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq");
+	gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq));
+
+	/* disable the interrupt and clear the status */
+	__raw_writew(0, brd_io + INTR_MASK_REG);
+	__raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
+	__raw_writew(0, brd_io + INTR_RESET_REG);
+	__raw_writew(0x1F, brd_io + INTR_MASK_REG);
+	for (i = MXC_EXP_IO_BASE;
+	     i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) {
+		set_irq_chip(i, &expio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_type(p_irq, IRQF_TRIGGER_LOW);
+	set_irq_chained_handler(p_irq, mxc_expio_irq_handler);
+
+	/* Register Lan device on the debugboard */
+	smsc911x_resources[0].start = LAN9217_BASE_ADDR(base);
+	smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1;
+	platform_device_register(&smsc_lan9217_device);
+
+	return 0;
+}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 7f7ad6f289bd..64e3a64520e0 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -1,5 +1,7 @@
 if ARCH_MXC
 
+source "arch/arm/plat-mxc/devices/Kconfig"
+
 menu "Freescale MXC Implementations"
 
 choice
@@ -8,15 +10,12 @@ choice
 
 config ARCH_MX1
 	bool "MX1-based"
-	select CPU_ARM920T
-	select IMX_HAVE_IOMUX_V1
+	select SOC_IMX1
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
 config ARCH_MX2
 	bool "MX2-based"
-	select CPU_ARM926T
-	select IMX_HAVE_IOMUX_V1
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
@@ -25,6 +24,7 @@ config ARCH_MX25
 	select CPU_ARM926T
 	select ARCH_MXC_IOMUX_V3
 	select HAVE_FB_IMX
+	select ARCH_MXC_AUDMUX_V2
 	help
 	  This enables support for systems based on the Freescale i.MX25 family
 
@@ -43,13 +43,13 @@ config ARCH_MXC91231
 config ARCH_MX5
 	bool "MX5-based"
 	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
 	help
 	  This enables support for systems based on the Freescale i.MX51 family
 
 endchoice
 
-source "arch/arm/mach-mx1/Kconfig"
-source "arch/arm/mach-mx2/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
 source "arch/arm/mach-mxc91231/Kconfig"
@@ -81,6 +81,29 @@ config MXC_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config MXC_DEBUG_BOARD
+	bool "Enable MXC debug board(for 3-stack)"
+	help
+	  The debug board is an integral part of the MXC 3-stack(PDK)
+	  platforms, it can be attached or removed from the peripheral
+	  board. On debug board, several debug devices(ethernet, UART,
+	  buttons, LEDs and JTAG) are implemented. Between the MCU and
+	  these devices, a CPLD is added as a bridge which performs
+	  data/address de-multiplexing and decode, signal level shift,
+	  interrupt control and various board functions.
+
+config HAVE_EPIT
+	bool
+
+config MXC_USE_EPIT
+	bool "Use EPIT instead of GPT"
+	depends on HAVE_EPIT
+	help
+	  Use EPIT as the system timer on systems that have it. Normally you
+	  don't have a reason to do so as the EPIT has the same features and
+	  uses the same clocks as the GPT. Anyway, on some systems the GPT
+	  may be in use for other purposes.
+
 config MXC_ULPI
 	bool
 
@@ -99,4 +122,8 @@ config ARCH_MXC_AUDMUX_V1
 config ARCH_MXC_AUDMUX_V2
 	bool
 
+config IRAM_ALLOC
+	bool
+	select GENERIC_ALLOCATOR
+
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 895bc3c5e0c0..372670952789 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -8,16 +8,20 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 # MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 
-obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
-obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
+obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
 obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
+obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
+obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
 ifdef CONFIG_SND_IMX_SOC
 obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
+
+obj-y += devices/
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
index b62917ca3f95..1180bef7664b 100644
--- a/arch/arm/plat-mxc/audmux-v1.c
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 0c2cc5cd4d83..0be1ac7f421b 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/module.h>
@@ -141,6 +137,7 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
 static const struct file_operations audmux_debugfs_fops = {
 	.open = audmux_open_file,
 	.read = audmux_read_file,
+	.llseek = default_llseek,
 };
 
 static void audmux_debugfs_init(void)
@@ -190,7 +187,14 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
 static int mxc_audmux_v2_init(void)
 {
 	int ret;
-
+#if defined(CONFIG_ARCH_MX5)
+	if (cpu_is_mx51()) {
+		audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR);
+		ret = 0;
+		return ret;
+	}
+#endif
+#if defined(CONFIG_ARCH_MX3)
 	if (cpu_is_mx31())
 		audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
 
@@ -204,7 +208,19 @@ static int mxc_audmux_v2_init(void)
 		}
 		audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
 	}
-
+#endif
+#if defined(CONFIG_ARCH_MX25)
+	if (cpu_is_mx25()) {
+		audmux_clk = clk_get(NULL, "audmux");
+		if (IS_ERR(audmux_clk)) {
+			ret = PTR_ERR(audmux_clk);
+			printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
+					ret);
+			return ret;
+		}
+		audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR);
+	}
+#endif
 	audmux_debugfs_init();
 
 	return 0;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 323ff8ccc877..2ed3ab173add 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -52,13 +52,14 @@ static void __clk_disable(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
 		return;
-
-	__clk_disable(clk->parent);
-	__clk_disable(clk->secondary);
-
 	WARN_ON(!clk->usecount);
-	if (!(--clk->usecount) && clk->disable)
-		clk->disable(clk);
+
+	if (!(--clk->usecount)) {
+		if (clk->disable)
+			clk->disable(clk);
+		__clk_disable(clk->parent);
+		__clk_disable(clk->secondary);
+	}
 }
 
 static int __clk_enable(struct clk *clk)
@@ -66,12 +67,13 @@ static int __clk_enable(struct clk *clk)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
-	__clk_enable(clk->parent);
-	__clk_enable(clk->secondary);
-
-	if (clk->usecount++ == 0 && clk->enable)
-		clk->enable(clk);
+	if (clk->usecount++ == 0) {
+		__clk_enable(clk->parent);
+		__clk_enable(clk->secondary);
 
+		if (clk->enable)
+			clk->enable(clk);
+	}
 	return 0;
 }
 
@@ -160,17 +162,28 @@ EXPORT_SYMBOL(clk_set_rate);
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
 	int ret = -EINVAL;
+	struct clk *old;
 
 	if (clk == NULL || IS_ERR(clk) || parent == NULL ||
 	    IS_ERR(parent) || clk->set_parent == NULL)
 		return ret;
 
+	if (clk->usecount)
+		clk_enable(parent);
+
 	mutex_lock(&clocks_mutex);
 	ret = clk->set_parent(clk, parent);
-	if (ret == 0)
+	if (ret == 0) {
+		old = clk->parent;
 		clk->parent = parent;
+	} else {
+		old = parent;
+	}
 	mutex_unlock(&clocks_mutex);
 
+	if (clk->usecount)
+		clk_disable(old);
+
 	return ret;
 }
 EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
new file mode 100644
index 000000000000..039538e68793
--- /dev/null
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
+ * The CPUFREQ driver is for controling CPU frequency. It allows you to change
+ * the CPU clock speed on the fly.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <mach/hardware.h>
+#include <mach/clock.h>
+
+#define CLK32_FREQ	32768
+#define NANOSECOND	(1000 * 1000 * 1000)
+
+struct cpu_op *(*get_cpu_op)(int *op);
+
+static int cpu_freq_khz_min;
+static int cpu_freq_khz_max;
+
+static struct clk *cpu_clk;
+static struct cpufreq_frequency_table *imx_freq_table;
+
+static int cpu_op_nr;
+static struct cpu_op *cpu_op_tbl;
+
+static int set_cpu_freq(int freq)
+{
+	int ret = 0;
+	int org_cpu_rate;
+
+	org_cpu_rate = clk_get_rate(cpu_clk);
+	if (org_cpu_rate == freq)
+		return ret;
+
+	ret = clk_set_rate(cpu_clk, freq);
+	if (ret != 0) {
+		printk(KERN_DEBUG "cannot set CPU clock rate\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static int mxc_verify_speed(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	return cpufreq_frequency_table_verify(policy, imx_freq_table);
+}
+
+static unsigned int mxc_get_speed(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+
+	return clk_get_rate(cpu_clk) / 1000;
+}
+
+static int mxc_set_target(struct cpufreq_policy *policy,
+			  unsigned int target_freq, unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	int freq_Hz;
+	int ret = 0;
+	unsigned int index;
+
+	cpufreq_frequency_table_target(policy, imx_freq_table,
+			target_freq, relation, &index);
+	freq_Hz = imx_freq_table[index].frequency * 1000;
+
+	freqs.old = clk_get_rate(cpu_clk) / 1000;
+	freqs.new = freq_Hz / 1000;
+	freqs.cpu = 0;
+	freqs.flags = 0;
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	ret = set_cpu_freq(freq_Hz);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return ret;
+}
+
+static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int ret;
+	int i;
+
+	printk(KERN_INFO "i.MXC CPU frequency driver\n");
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	if (!get_cpu_op)
+		return -EINVAL;
+
+	cpu_clk = clk_get(NULL, "cpu_clk");
+	if (IS_ERR(cpu_clk)) {
+		printk(KERN_ERR "%s: failed to get cpu clock\n", __func__);
+		return PTR_ERR(cpu_clk);
+	}
+
+	cpu_op_tbl = get_cpu_op(&cpu_op_nr);
+
+	cpu_freq_khz_min = cpu_op_tbl[0].cpu_rate / 1000;
+	cpu_freq_khz_max = cpu_op_tbl[0].cpu_rate / 1000;
+
+	imx_freq_table = kmalloc(
+		sizeof(struct cpufreq_frequency_table) * (cpu_op_nr + 1),
+			GFP_KERNEL);
+	if (!imx_freq_table) {
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	for (i = 0; i < cpu_op_nr; i++) {
+		imx_freq_table[i].index = i;
+		imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000;
+
+		if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min)
+			cpu_freq_khz_min = cpu_op_tbl[i].cpu_rate / 1000;
+
+		if ((cpu_op_tbl[i].cpu_rate / 1000) > cpu_freq_khz_max)
+			cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000;
+	}
+
+	imx_freq_table[i].index = i;
+	imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	policy->cur = clk_get_rate(cpu_clk) / 1000;
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
+	policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
+
+	/* Manual states, that PLL stabilizes in two CLK32 periods */
+	policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ;
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table);
+
+	if (ret < 0) {
+		printk(KERN_ERR "%s: failed to register i.MXC CPUfreq \
+				with error code %d\n", __func__, ret);
+		goto err;
+	}
+
+	cpufreq_frequency_table_get_attr(imx_freq_table, policy->cpu);
+	return 0;
+err:
+	kfree(imx_freq_table);
+err1:
+	clk_put(cpu_clk);
+	return ret;
+}
+
+static int mxc_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+
+	set_cpu_freq(cpu_freq_khz_max * 1000);
+	clk_put(cpu_clk);
+	kfree(imx_freq_table);
+	return 0;
+}
+
+static struct cpufreq_driver mxc_driver = {
+	.flags = CPUFREQ_STICKY,
+	.verify = mxc_verify_speed,
+	.target = mxc_set_target,
+	.get = mxc_get_speed,
+	.init = mxc_cpufreq_init,
+	.exit = mxc_cpufreq_exit,
+	.name = "imx",
+};
+
+static int __devinit mxc_cpufreq_driver_init(void)
+{
+	return cpufreq_register_driver(&mxc_driver);
+}
+
+static void mxc_cpufreq_driver_exit(void)
+{
+	cpufreq_unregister_driver(&mxc_driver);
+}
+
+module_init(mxc_cpufreq_driver_init);
+module_exit(mxc_cpufreq_driver_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor Inc. Yong Shen <yong.shen@linaro.org>");
+MODULE_DESCRIPTION("CPUfreq driver for i.MX");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index 56f2fb5cc456..735776d84956 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -18,6 +18,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <mach/common.h>
 
@@ -35,3 +36,35 @@ int __init mxc_register_device(struct platform_device *pdev, void *data)
 	return ret;
 }
 
+struct platform_device *__init imx_add_platform_device(const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data)
+{
+	int ret = -ENOMEM;
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc(name, id);
+	if (!pdev)
+		goto err;
+
+	if (res) {
+		ret = platform_device_add_resources(pdev, res, num_resources);
+		if (ret)
+			goto err;
+	}
+
+	if (data) {
+		ret = platform_device_add_data(pdev, data, size_data);
+		if (ret)
+			goto err;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+err:
+		platform_device_put(pdev);
+		return ERR_PTR(ret);
+	}
+
+	return pdev;
+}
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
new file mode 100644
index 000000000000..9aa6f3ea9012
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -0,0 +1,29 @@
+config IMX_HAVE_PLATFORM_ESDHC
+	bool
+
+config IMX_HAVE_PLATFORM_FEC
+	bool
+	default y if ARCH_MX25 || SOC_IMX27 || ARCH_MX35 || ARCH_MX51
+
+config IMX_HAVE_PLATFORM_FLEXCAN
+	select HAVE_CAN_FLEXCAN if CAN
+	bool
+
+config IMX_HAVE_PLATFORM_GPIO_KEYS
+	bool
+	default y if ARCH_MX51
+	
+config IMX_HAVE_PLATFORM_IMX_I2C
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_SSI
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_UART
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_NAND
+	bool
+
+config IMX_HAVE_PLATFORM_SPI_IMX
+	bool
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
new file mode 100644
index 000000000000..45aefeb283ba
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -0,0 +1,10 @@
+obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
+obj-y += platform-imx-dma.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-esdhc.c b/arch/arm/plat-mxc/devices/platform-esdhc.c
new file mode 100644
index 000000000000..2605bfa0dfb0
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-esdhc.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+#include <mach/esdhc.h>
+
+#define imx_esdhc_imx_data_entry_single(soc, _id, hwid) \
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR,	\
+		.irq = soc ## _INT_ESDHC ## hwid,			\
+	}
+
+#define imx_esdhc_imx_data_entry(soc, id, hwid)	\
+	[id] = imx_esdhc_imx_data_entry_single(soc, id, hwid)
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst = {
+#define imx25_esdhc_data_entry(_id, _hwid)				\
+	imx_esdhc_imx_data_entry(MX25, _id, _hwid)
+	imx25_esdhc_data_entry(0, 1),
+	imx25_esdhc_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst = {
+#define imx35_esdhc_data_entry(_id, _hwid)                           \
+	imx_esdhc_imx_data_entry(MX35, _id, _hwid)
+	imx35_esdhc_data_entry(0, 1),
+	imx35_esdhc_data_entry(1, 2),
+	imx35_esdhc_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst = {
+#define imx51_esdhc_data_entry(_id, _hwid)				\
+	imx_esdhc_imx_data_entry(MX51, _id, _hwid)
+	imx51_esdhc_data_entry(0, 1),
+	imx51_esdhc_data_entry(1, 2),
+	imx51_esdhc_data_entry(2, 3),
+	imx51_esdhc_data_entry(3, 4),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_esdhc(
+		const struct imx_esdhc_imx_data *data,
+		const struct esdhc_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("sdhci-esdhc-imx", data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
new file mode 100644
index 000000000000..11d087f4e219
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_fec_data_entry_single(soc)					\
+	{								\
+		.iobase = soc ## _FEC_BASE_ADDR,			\
+		.irq = soc ## _INT_FEC,					\
+	}
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_fec_data imx25_fec_data __initconst =
+	imx_fec_data_entry_single(MX25);
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_fec_data imx27_fec_data __initconst =
+	imx_fec_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_fec_data imx35_fec_data __initconst =
+	imx_fec_data_entry_single(MX35);
+#endif
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_fec_data imx51_fec_data __initconst =
+	imx_fec_data_entry_single(MX51);
+#endif
+
+struct platform_device *__init imx_add_fec(
+		const struct imx_fec_data *data,
+		const struct fec_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("fec", 0 /* -1? */,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/plat-mxc/devices/platform-flexcan.c
new file mode 100644
index 000000000000..5e97a01f14f3
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-flexcan.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2010 Pengutronix, Marc Kleine-Budde <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_flexcan(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct flexcan_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = iobase,
+			.end = iobase + iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = irq,
+			.end = irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("flexcan", id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-gpio_keys.c b/arch/arm/plat-mxc/devices/platform-gpio_keys.c
new file mode 100644
index 000000000000..1c53a532ea0e
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-gpio_keys.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+struct platform_device *__init imx_add_gpio_keys(
+		const struct gpio_keys_platform_data *pdata)
+{
+	return imx_add_platform_device("gpio-keys", -1, NULL,
+		 0, pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
new file mode 100644
index 000000000000..02d989018059
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+#ifdef SDMA_IS_MERGED
+#include <mach/sdma.h>
+#else
+struct sdma_platform_data {
+	int sdma_version;
+	char *cpu_name;
+	int to_version;
+};
+#endif
+
+struct imx_imx_sdma_data {
+	resource_size_t iobase;
+	resource_size_t irq;
+	struct sdma_platform_data pdata;
+};
+
+#define imx_imx_sdma_data_entry_single(soc, _sdma_version, _cpu_name, _to_version)\
+	{								\
+		.iobase = soc ## _SDMA ## _BASE_ADDR,			\
+		.irq = soc ## _INT_SDMA,				\
+		.pdata = {						\
+			.sdma_version = _sdma_version,			\
+			.cpu_name = _cpu_name,				\
+			.to_version = _to_version,			\
+		},							\
+	}
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
+	imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0);
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_ARCH_MX31
+struct imx_imx_sdma_data imx31_imx_sdma_data __initdata =
+	imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0);
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+struct imx_imx_sdma_data imx35_imx_sdma_data __initdata =
+	imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0);
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
+	imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0);
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
+		const struct imx_imx_sdma_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-sdma", -1,
+			res, ARRAY_SIZE(res),
+			&data->pdata, sizeof(data->pdata));
+}
+
+static struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
+{
+	return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0);
+}
+
+static int __init imxXX_add_imx_dma(void)
+{
+	struct platform_device *ret;
+
+#if defined(CONFIG_SOC_IMX21) || defined(CONFIG_SOC_IMX27)
+	if (cpu_is_mx21() || cpu_is_mx27())
+		ret = imx_add_imx_dma();
+	else
+#endif
+
+#if defined(CONFIG_ARCH_MX25)
+	if (cpu_is_mx25())
+		ret = imx_add_imx_sdma(&imx25_imx_sdma_data);
+	else
+#endif
+
+#if defined(CONFIG_ARCH_MX31)
+	if (cpu_is_mx31()) {
+		imx31_imx_sdma_data.pdata.to_version = mx31_revision() >> 4;
+		ret = imx_add_imx_sdma(&imx31_imx_sdma_data);
+	} else
+#endif
+
+#if defined(CONFIG_ARCH_MX35)
+	if (cpu_is_mx35()) {
+		imx35_imx_sdma_data.pdata.to_version = mx35_revision() >> 4;
+		ret = imx_add_imx_sdma(&imx35_imx_sdma_data);
+	} else
+#endif
+
+#if defined(CONFIG_ARCH_MX51)
+	if (cpu_is_mx51())
+		ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
+	else
+#endif
+		ret = ERR_PTR(-ENODEV);
+
+	if (IS_ERR(ret))
+		return PTR_ERR(ret);
+
+	return 0;
+}
+arch_initcall(imxXX_add_imx_dma);
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
new file mode 100644
index 000000000000..679588453aad
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)		\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _I2C ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_I2C ## _hwid,			\
+	}
+
+#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
+	imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
+	imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
+#define imx25_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K)
+	imx25_imx_i2c_data_entry(0, 1),
+	imx25_imx_i2c_data_entry(1, 2),
+	imx25_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
+#define imx27_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K)
+	imx27_imx_i2c_data_entry(0, 1),
+	imx27_imx_i2c_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
+#define imx31_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K)
+	imx31_imx_i2c_data_entry(0, 1),
+	imx31_imx_i2c_data_entry(1, 2),
+	imx31_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
+#define imx35_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K)
+	imx35_imx_i2c_data_entry(0, 1),
+	imx35_imx_i2c_data_entry(1, 2),
+	imx35_imx_i2c_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
+#define imx51_imx_i2c_data_entry(_id, _hwid)				\
+	imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
+	imx51_imx_i2c_data_entry(0, 1),
+	imx51_imx_i2c_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_imx_i2c(
+		const struct imx_imx_i2c_data *data,
+		const struct imxi2c_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-i2c", data->id,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
new file mode 100644
index 000000000000..38a7a0b8f2f1
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = {							\
+		.id = _id,						\
+		.iobase = soc ## _SSI ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_SSI ## _hwid,			\
+		.dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0,		\
+		.dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0,		\
+		.dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1,		\
+		.dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1,		\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
+#define imx21_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K)
+	imx21_imx_ssi_data_entry(0, 1),
+	imx21_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
+#define imx25_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
+	imx25_imx_ssi_data_entry(0, 1),
+	imx25_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
+#define imx27_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K)
+	imx27_imx_ssi_data_entry(0, 1),
+	imx27_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
+#define imx31_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
+	imx31_imx_ssi_data_entry(0, 1),
+	imx31_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
+#define imx35_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
+	imx35_imx_ssi_data_entry(0, 1),
+	imx35_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
+#define imx51_imx_ssi_data_entry(_id, _hwid)				\
+	imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K)
+	imx51_imx_ssi_data_entry(0, 1),
+	imx51_imx_ssi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_imx_ssi(
+		const struct imx_imx_ssi_data *data,
+		const struct imx_ssi_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+#define DMARES(_name) {							\
+	.name = #_name,							\
+	.start = data->dma ## _name,					\
+	.end = data->dma ## _name,					\
+	.flags = IORESOURCE_DMA,					\
+}
+		DMARES(tx0),
+		DMARES(rx0),
+		DMARES(tx1),
+		DMARES(rx1),
+	};
+
+	return imx_add_platform_device("imx-ssi", data->id,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
new file mode 100644
index 000000000000..2039640adf27
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size)		\
+	[_id] = {							\
+		.id = _id,						\
+		.iobase = soc ## _UART ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irqrx = soc ## _INT_UART ## _hwid ## RX,		\
+		.irqtx = soc ## _INT_UART ## _hwid ## TX,		\
+		.irqrts = soc ## _INT_UART ## _hwid ## RTS,		\
+	}
+
+#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size)		\
+	[_id] = {							\
+		.id = _id,						\
+		.iobase = soc ## _UART ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_UART ## _hwid,			\
+	}
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = {
+#define imx1_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0)
+	imx1_imx_uart_data_entry(0, 1),
+	imx1_imx_uart_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
+#define imx21_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K)
+	imx21_imx_uart_data_entry(0, 1),
+	imx21_imx_uart_data_entry(1, 2),
+	imx21_imx_uart_data_entry(2, 3),
+	imx21_imx_uart_data_entry(3, 4),
+};
+#endif
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
+#define imx25_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
+	imx25_imx_uart_data_entry(0, 1),
+	imx25_imx_uart_data_entry(1, 2),
+	imx25_imx_uart_data_entry(2, 3),
+	imx25_imx_uart_data_entry(3, 4),
+	imx25_imx_uart_data_entry(4, 5),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
+#define imx27_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K)
+	imx27_imx_uart_data_entry(0, 1),
+	imx27_imx_uart_data_entry(1, 2),
+	imx27_imx_uart_data_entry(2, 3),
+	imx27_imx_uart_data_entry(3, 4),
+	imx27_imx_uart_data_entry(4, 5),
+	imx27_imx_uart_data_entry(5, 6),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
+#define imx31_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
+	imx31_imx_uart_data_entry(0, 1),
+	imx31_imx_uart_data_entry(1, 2),
+	imx31_imx_uart_data_entry(2, 3),
+	imx31_imx_uart_data_entry(3, 4),
+	imx31_imx_uart_data_entry(4, 5),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
+#define imx35_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K)
+	imx35_imx_uart_data_entry(0, 1),
+	imx35_imx_uart_data_entry(1, 2),
+	imx35_imx_uart_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
+#define imx51_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K)
+	imx51_imx_uart_data_entry(0, 1),
+	imx51_imx_uart_data_entry(1, 2),
+	imx51_imx_uart_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_imx_uart_3irq(
+		const struct imx_imx_uart_3irq_data *data,
+		const struct imxuart_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irqrx,
+			.end = data->irqrx,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irqtx,
+			.end = data->irqtx,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irqrts,
+			.end = data->irqrx,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-uart", data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
+
+struct platform_device *__init imx_add_imx_uart_1irq(
+		const struct imx_imx_uart_1irq_data *data,
+		const struct imxuart_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-uart", data->id, res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
new file mode 100644
index 000000000000..3fdcc32e3d67
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mxc_nand_data_entry_single(soc, _size)			\
+	{								\
+		.iobase = soc ## _NFC_BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq = soc ## _INT_NFC					\
+	}
+
+#define imx_mxc_nandv3_data_entry_single(soc, _size)			\
+	{								\
+		.id = -1,						\
+		.iobase = soc ## _NFC_BASE_ADDR,			\
+		.iosize = _size,					\
+		.axibase = soc ## _NFC_AXI_BASE_ADDR,			\
+		.irq = soc ## _INT_NFC					\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX21, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX25, SZ_8K);
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX27, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX31, SZ_4K);
+#endif
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
+	imx_mxc_nand_data_entry_single(MX35, SZ_8K);
+#endif
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
+	imx_mxc_nandv3_data_entry_single(MX51, SZ_16K);
+#endif
+
+struct platform_device *__init imx_add_mxc_nand(
+		const struct imx_mxc_nand_data *data,
+		const struct mxc_nand_platform_data *pdata)
+{
+	/* AXI has to come first, that's how the mxc_nand driver expect it */
+	struct resource res[] = {
+		{
+			.start = data->axibase,
+			.end = data->axibase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device("mxc_nand", data->id,
+			res + !data->axibase,
+			ARRAY_SIZE(res) - !data->axibase,
+			pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
new file mode 100644
index 000000000000..e48340ec331e
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \
+	{								\
+		.devid = _devid,					\
+		.id = _id,						\
+		.iobase = soc ## _ ## type ## hwid ## _BASE_ADDR,	\
+		.iosize = _size,					\
+		.irq = soc ## _INT_ ## type ## hwid,			\
+	}
+
+#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size)	\
+	[id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
+#define imx21_cspi_data_entry(_id, _hwid)                            \
+	imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
+	imx21_cspi_data_entry(0, 1),
+	imx21_cspi_data_entry(1, 2),
+#endif
+
+#ifdef CONFIG_ARCH_MX25
+const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
+#define imx25_cspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K)
+	imx25_cspi_data_entry(0, 1),
+	imx25_cspi_data_entry(1, 2),
+	imx25_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
+#define imx27_cspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K)
+	imx27_cspi_data_entry(0, 1),
+	imx27_cspi_data_entry(1, 2),
+	imx27_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_ARCH_MX31
+const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
+#define imx31_cspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
+	imx31_cspi_data_entry(0, 1),
+	imx31_cspi_data_entry(1, 2),
+	imx31_cspi_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_ARCH_MX31 */
+
+#ifdef CONFIG_ARCH_MX35
+const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
+#define imx35_cspi_data_entry(_id, _hwid)                           \
+	imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
+	imx35_cspi_data_entry(0, 1),
+	imx35_cspi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX35 */
+
+#ifdef CONFIG_ARCH_MX51
+const struct imx_spi_imx_data imx51_cspi_data __initconst =
+	imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K);
+
+const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
+#define imx51_ecspi_data_entry(_id, _hwid)				\
+	imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K)
+	imx51_ecspi_data_entry(0, 1),
+	imx51_ecspi_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_ARCH_MX51 */
+
+struct platform_device *__init imx_add_spi_imx(
+		const struct imx_spi_imx_data *data,
+		const struct spi_imx_master *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device(data->devid, data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
deleted file mode 100644
index e16014b0d13c..000000000000
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ /dev/null
@@ -1,863 +0,0 @@
-/*
- *  linux/arch/arm/plat-mxc/dma-mx1-mx2.c
- *
- *  i.MX DMA registration and IRQ dispatching
- *
- * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
- * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/scatterlist.h>
-#include <linux/io.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma-mx1-mx2.h>
-
-#define DMA_DCR     0x00		/* Control Register */
-#define DMA_DISR    0x04		/* Interrupt status Register */
-#define DMA_DIMR    0x08		/* Interrupt mask Register */
-#define DMA_DBTOSR  0x0c		/* Burst timeout status Register */
-#define DMA_DRTOSR  0x10		/* Request timeout Register */
-#define DMA_DSESR   0x14		/* Transfer Error Status Register */
-#define DMA_DBOSR   0x18		/* Buffer overflow status Register */
-#define DMA_DBTOCR  0x1c		/* Burst timeout control Register */
-#define DMA_WSRA    0x40		/* W-Size Register A */
-#define DMA_XSRA    0x44		/* X-Size Register A */
-#define DMA_YSRA    0x48		/* Y-Size Register A */
-#define DMA_WSRB    0x4c		/* W-Size Register B */
-#define DMA_XSRB    0x50		/* X-Size Register B */
-#define DMA_YSRB    0x54		/* Y-Size Register B */
-#define DMA_SAR(x)  (0x80 + ((x) << 6))	/* Source Address Registers */
-#define DMA_DAR(x)  (0x84 + ((x) << 6))	/* Destination Address Registers */
-#define DMA_CNTR(x) (0x88 + ((x) << 6))	/* Count Registers */
-#define DMA_CCR(x)  (0x8c + ((x) << 6))	/* Control Registers */
-#define DMA_RSSR(x) (0x90 + ((x) << 6))	/* Request source select Registers */
-#define DMA_BLR(x)  (0x94 + ((x) << 6))	/* Burst length Registers */
-#define DMA_RTOR(x) (0x98 + ((x) << 6))	/* Request timeout Registers */
-#define DMA_BUCR(x) (0x98 + ((x) << 6))	/* Bus Utilization Registers */
-#define DMA_CCNR(x) (0x9C + ((x) << 6))	/* Channel counter Registers */
-
-#define DCR_DRST           (1<<1)
-#define DCR_DEN            (1<<0)
-#define DBTOCR_EN          (1<<15)
-#define DBTOCR_CNT(x)      ((x) & 0x7fff)
-#define CNTR_CNT(x)        ((x) & 0xffffff)
-#define CCR_ACRPT          (1<<14)
-#define CCR_DMOD_LINEAR    (0x0 << 12)
-#define CCR_DMOD_2D        (0x1 << 12)
-#define CCR_DMOD_FIFO      (0x2 << 12)
-#define CCR_DMOD_EOBFIFO   (0x3 << 12)
-#define CCR_SMOD_LINEAR    (0x0 << 10)
-#define CCR_SMOD_2D        (0x1 << 10)
-#define CCR_SMOD_FIFO      (0x2 << 10)
-#define CCR_SMOD_EOBFIFO   (0x3 << 10)
-#define CCR_MDIR_DEC       (1<<9)
-#define CCR_MSEL_B         (1<<8)
-#define CCR_DSIZ_32        (0x0 << 6)
-#define CCR_DSIZ_8         (0x1 << 6)
-#define CCR_DSIZ_16        (0x2 << 6)
-#define CCR_SSIZ_32        (0x0 << 4)
-#define CCR_SSIZ_8         (0x1 << 4)
-#define CCR_SSIZ_16        (0x2 << 4)
-#define CCR_REN            (1<<3)
-#define CCR_RPT            (1<<2)
-#define CCR_FRC            (1<<1)
-#define CCR_CEN            (1<<0)
-#define RTOR_EN            (1<<15)
-#define RTOR_CLK           (1<<14)
-#define RTOR_PSC           (1<<13)
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @resbytes: total residual number of bytes to transfer
- *            (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
-	const char *name;
-	void (*irq_handler) (int, void *);
-	void (*err_handler) (int, void *, int errcode);
-	void (*prog_handler) (int, void *, struct scatterlist *);
-	void *data;
-	unsigned int dma_mode;
-	struct scatterlist *sg;
-	unsigned int resbytes;
-	int dma_num;
-
-	int in_use;
-
-	u32 ccr_from_device;
-	u32 ccr_to_device;
-
-	struct timer_list watchdog;
-
-	int hw_chaining;
-};
-
-static void __iomem *imx_dmav1_baseaddr;
-
-static void imx_dmav1_writel(unsigned val, unsigned offset)
-{
-	__raw_writel(val, imx_dmav1_baseaddr + offset);
-}
-
-static unsigned imx_dmav1_readl(unsigned offset)
-{
-	return __raw_readl(imx_dmav1_baseaddr + offset);
-}
-
-static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-static struct clk *dma_clk;
-
-static int imx_dma_hw_chain(struct imx_dma_channel *imxdma)
-{
-	if (cpu_is_mx27())
-		return imxdma->hw_chaining;
-	else
-		return 0;
-}
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- */
-static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long now;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, channel);
-		return 0;
-	}
-
-	now = min(imxdma->resbytes, sg->length);
-	if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP)
-		imxdma->resbytes -= now;
-
-	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-		imx_dmav1_writel(sg->dma_address, DMA_DAR(channel));
-	else
-		imx_dmav1_writel(sg->dma_address, DMA_SAR(channel));
-
-	imx_dmav1_writel(now, DMA_CNTR(channel));
-
-	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
-		"size 0x%08x\n", channel,
-		 imx_dmav1_readl(DMA_DAR(channel)),
-		 imx_dmav1_readl(DMA_SAR(channel)),
-		 imx_dmav1_readl(DMA_CNTR(channel)));
-
-	return now;
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from
- * device transfer
- *
- * @channel: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- *		to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- *		Zero indicates success.
- */
-int
-imx_dma_setup_single(int channel, dma_addr_t dma_address,
-		     unsigned int dma_length, unsigned int dev_addr,
-		     unsigned int dmamode)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-
-	imxdma->sg = NULL;
-	imxdma->dma_mode = dmamode;
-
-	if (!dma_address) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	if (!dma_length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
-			"dev_addr=0x%08x for read\n",
-			channel, __func__, (unsigned int)dma_address,
-			dma_length, dev_addr);
-
-		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
-		imx_dmav1_writel(dma_address, DMA_DAR(channel));
-		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
-			"dev_addr=0x%08x for write\n",
-			channel, __func__, (unsigned int)dma_address,
-			dma_length, dev_addr);
-
-		imx_dmav1_writel(dma_address, DMA_SAR(channel));
-		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
-		imx_dmav1_writel(imxdma->ccr_to_device,
-				DMA_CCR(channel));
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	imx_dmav1_writel(dma_length, DMA_CNTR(channel));
-
-	return 0;
-}
-EXPORT_SYMBOL(imx_dma_setup_single);
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @channel: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for
- * transfer specified by provided parameters. The scatter-gather emulation
- * is set up according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(channel) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(channel) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(channel) has to specify transfer parameters, the next settings is
- * typical for linear or simple scatter-gather transfers if %DMA_MODE_READ is
- * specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options
- * combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(int channel,
-		 struct scatterlist *sg, unsigned int sgcount,
-		 unsigned int dma_length, unsigned int dev_addr,
-		 unsigned int dmamode)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-
-	if (imxdma->in_use)
-		return -EBUSY;
-
-	imxdma->sg = sg;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!sg || !sgcount) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	if (!sg->length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
-			"dev_addr=0x%08x for read\n",
-			channel, __func__, sg, sgcount, dma_length, dev_addr);
-
-		imx_dmav1_writel(dev_addr, DMA_SAR(channel));
-		imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
-			"dev_addr=0x%08x for write\n",
-			channel, __func__, sg, sgcount, dma_length, dev_addr);
-
-		imx_dmav1_writel(dev_addr, DMA_DAR(channel));
-		imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel));
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
-		       channel);
-		return -EINVAL;
-	}
-
-	imx_dma_sg_next(channel, sg);
-
-	return 0;
-}
-EXPORT_SYMBOL(imx_dma_setup_sg);
-
-int
-imx_dma_config_channel(int channel, unsigned int config_port,
-	unsigned int config_mem, unsigned int dmareq, int hw_chaining)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	u32 dreq = 0;
-
-	imxdma->hw_chaining = 0;
-
-	if (hw_chaining) {
-		imxdma->hw_chaining = 1;
-		if (!imx_dma_hw_chain(imxdma))
-			return -EINVAL;
-	}
-
-	if (dmareq)
-		dreq = CCR_REN;
-
-	imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
-	imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
-
-	imx_dmav1_writel(dmareq, DMA_RSSR(channel));
-
-	return 0;
-}
-EXPORT_SYMBOL(imx_dma_config_channel);
-
-void imx_dma_config_burstlen(int channel, unsigned int burstlen)
-{
-	imx_dmav1_writel(burstlen, DMA_BLR(channel));
-}
-EXPORT_SYMBOL(imx_dma_config_burstlen);
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification
- * handlers
- * @channel: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- *		ends successfully
- * @err_handler: the pointer to the function called if the premature
- *		end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(int channel,
-		       void (*irq_handler) (int, void *),
-		       void (*err_handler) (int, void *, int),
-		       void *data)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long flags;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, channel);
-		return -ENODEV;
-	}
-
-	local_irq_save(flags);
-	imx_dmav1_writel(1 << channel, DMA_DISR);
-	imxdma->irq_handler = irq_handler;
-	imxdma->err_handler = err_handler;
-	imxdma->data = data;
-	local_irq_restore(flags);
-	return 0;
-}
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-
-/**
- * imx_dma_setup_progression_handler - setup i.MX DMA channel progression
- * handlers
- * @channel: i.MX DMA channel number
- * @prog_handler: the pointer to the function called if the transfer progresses
- */
-int
-imx_dma_setup_progression_handler(int channel,
-			void (*prog_handler) (int, void*, struct scatterlist*))
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long flags;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, channel);
-		return -ENODEV;
-	}
-
-	local_irq_save(flags);
-	imxdma->prog_handler = prog_handler;
-	local_irq_restore(flags);
-	return 0;
-}
-EXPORT_SYMBOL(imx_dma_setup_progression_handler);
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @channel: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(channel), %RSSR(channel) and %CCR(channel) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(int channel)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_enable\n", channel);
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, channel);
-		return;
-	}
-
-	if (imxdma->in_use)
-		return;
-
-	local_irq_save(flags);
-
-	imx_dmav1_writel(1 << channel, DMA_DISR);
-	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR);
-	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
-		CCR_ACRPT, DMA_CCR(channel));
-
-#ifdef CONFIG_ARCH_MX2
-	if ((cpu_is_mx21() || cpu_is_mx27()) &&
-			imxdma->sg && imx_dma_hw_chain(imxdma)) {
-		imxdma->sg = sg_next(imxdma->sg);
-		if (imxdma->sg) {
-			u32 tmp;
-			imx_dma_sg_next(channel, imxdma->sg);
-			tmp = imx_dmav1_readl(DMA_CCR(channel));
-			imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT,
-				DMA_CCR(channel));
-		}
-	}
-#endif
-	imxdma->in_use = 1;
-
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(imx_dma_enable);
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @channel: i.MX DMA channel number
- */
-void imx_dma_disable(int channel)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_disable\n", channel);
-
-	if (imx_dma_hw_chain(imxdma))
-		del_timer(&imxdma->watchdog);
-
-	local_irq_save(flags);
-	imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR);
-	imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN,
-			DMA_CCR(channel));
-	imx_dmav1_writel(1 << channel, DMA_DISR);
-	imxdma->in_use = 0;
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(imx_dma_disable);
-
-#ifdef CONFIG_ARCH_MX2
-static void imx_dma_watchdog(unsigned long chno)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
-
-	imx_dmav1_writel(0, DMA_CCR(chno));
-	imxdma->in_use = 0;
-	imxdma->sg = NULL;
-
-	if (imxdma->err_handler)
-		imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
-}
-#endif
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
-	int i, disr;
-	struct imx_dma_channel *imxdma;
-	unsigned int err_mask;
-	int errcode;
-
-	disr = imx_dmav1_readl(DMA_DISR);
-
-	err_mask = imx_dmav1_readl(DMA_DBTOSR) |
-		   imx_dmav1_readl(DMA_DRTOSR) |
-		   imx_dmav1_readl(DMA_DSESR)  |
-		   imx_dmav1_readl(DMA_DBOSR);
-
-	if (!err_mask)
-		return IRQ_HANDLED;
-
-	imx_dmav1_writel(disr & err_mask, DMA_DISR);
-
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if (!(err_mask & (1 << i)))
-			continue;
-		imxdma = &imx_dma_channels[i];
-		errcode = 0;
-
-		if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) {
-			imx_dmav1_writel(1 << i, DMA_DBTOSR);
-			errcode |= IMX_DMA_ERR_BURST;
-		}
-		if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) {
-			imx_dmav1_writel(1 << i, DMA_DRTOSR);
-			errcode |= IMX_DMA_ERR_REQUEST;
-		}
-		if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) {
-			imx_dmav1_writel(1 << i, DMA_DSESR);
-			errcode |= IMX_DMA_ERR_TRANSFER;
-		}
-		if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) {
-			imx_dmav1_writel(1 << i, DMA_DBOSR);
-			errcode |= IMX_DMA_ERR_BUFFER;
-		}
-		if (imxdma->name && imxdma->err_handler) {
-			imxdma->err_handler(i, imxdma->data, errcode);
-			continue;
-		}
-
-		imx_dma_channels[i].sg = NULL;
-
-		printk(KERN_WARNING
-		       "DMA timeout on channel %d (%s) -%s%s%s%s\n",
-		       i, imxdma->name,
-		       errcode & IMX_DMA_ERR_BURST ?    " burst" : "",
-		       errcode & IMX_DMA_ERR_REQUEST ?  " request" : "",
-		       errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
-		       errcode & IMX_DMA_ERR_BUFFER ?   " buffer" : "");
-	}
-	return IRQ_HANDLED;
-}
-
-static void dma_irq_handle_channel(int chno)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
-
-	if (!imxdma->name) {
-		/*
-		 * IRQ for an unregistered DMA channel:
-		 * let's clear the interrupts and disable it.
-		 */
-		printk(KERN_WARNING
-		       "spurious IRQ for DMA channel %d\n", chno);
-		return;
-	}
-
-	if (imxdma->sg) {
-		u32 tmp;
-		struct scatterlist *current_sg = imxdma->sg;
-		imxdma->sg = sg_next(imxdma->sg);
-
-		if (imxdma->sg) {
-			imx_dma_sg_next(chno, imxdma->sg);
-
-			tmp = imx_dmav1_readl(DMA_CCR(chno));
-
-			if (imx_dma_hw_chain(imxdma)) {
-				/* FIXME: The timeout should probably be
-				 * configurable
-				 */
-				mod_timer(&imxdma->watchdog,
-					jiffies + msecs_to_jiffies(500));
-
-				tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
-				imx_dmav1_writel(tmp, DMA_CCR(chno));
-			} else {
-				imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno));
-				tmp |= CCR_CEN;
-			}
-
-			imx_dmav1_writel(tmp, DMA_CCR(chno));
-
-			if (imxdma->prog_handler)
-				imxdma->prog_handler(chno, imxdma->data,
-						current_sg);
-
-			return;
-		}
-
-		if (imx_dma_hw_chain(imxdma)) {
-			del_timer(&imxdma->watchdog);
-			return;
-		}
-	}
-
-	imx_dmav1_writel(0, DMA_CCR(chno));
-	imxdma->in_use = 0;
-	if (imxdma->irq_handler)
-		imxdma->irq_handler(chno, imxdma->data);
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, disr;
-
-#ifdef CONFIG_ARCH_MX2
-	if (cpu_is_mx21() || cpu_is_mx27())
-		dma_err_handler(irq, dev_id);
-#endif
-
-	disr = imx_dmav1_readl(DMA_DISR);
-
-	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
-		     disr);
-
-	imx_dmav1_writel(disr, DMA_DISR);
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if (disr & (1 << i))
-			dma_irq_handle_channel(i);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @channel: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(int channel, const char *name)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-	unsigned long flags;
-	int ret = 0;
-
-	/* basic sanity checks */
-	if (!name)
-		return -EINVAL;
-
-	if (channel >= IMX_DMA_CHANNELS) {
-		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
-		       __func__, channel);
-		return -EINVAL;
-	}
-
-	local_irq_save(flags);
-	if (imxdma->name) {
-		local_irq_restore(flags);
-		return -EBUSY;
-	}
-	memset(imxdma, 0, sizeof(imxdma));
-	imxdma->name = name;
-	local_irq_restore(flags); /* request_irq() can block */
-
-#ifdef CONFIG_ARCH_MX2
-	if (cpu_is_mx21() || cpu_is_mx27()) {
-		ret = request_irq(MX2x_INT_DMACH0 + channel,
-				dma_irq_handler, 0, "DMA", NULL);
-		if (ret) {
-			imxdma->name = NULL;
-			pr_crit("Can't register IRQ %d for DMA channel %d\n",
-					MX2x_INT_DMACH0 + channel, channel);
-			return ret;
-		}
-		init_timer(&imxdma->watchdog);
-		imxdma->watchdog.function = &imx_dma_watchdog;
-		imxdma->watchdog.data = channel;
-	}
-#endif
-
-	return ret;
-}
-EXPORT_SYMBOL(imx_dma_request);
-
-/**
- * imx_dma_free - release previously acquired channel
- * @channel: i.MX DMA channel number
- */
-void imx_dma_free(int channel)
-{
-	unsigned long flags;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT
-		       "%s: trying to free free channel %d\n",
-		       __func__, channel);
-		return;
-	}
-
-	local_irq_save(flags);
-	/* Disable interrupts */
-	imx_dma_disable(channel);
-	imxdma->name = NULL;
-
-#ifdef CONFIG_ARCH_MX2
-	if (cpu_is_mx21() || cpu_is_mx27())
-		free_irq(MX2x_INT_DMACH0 + channel, NULL);
-#endif
-
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(imx_dma_free);
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best
- * suiting requested priority
- * @channel: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- *
- * This function tries to find a free channel in the specified priority group
- * This function tries to find a free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- *               On successful allocation channel is returned.
- */
-int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio)
-{
-	int i;
-	int best;
-
-	switch (prio) {
-	case (DMA_PRIO_HIGH):
-		best = 8;
-		break;
-	case (DMA_PRIO_MEDIUM):
-		best = 4;
-		break;
-	case (DMA_PRIO_LOW):
-	default:
-		best = 0;
-		break;
-	}
-
-	for (i = best; i < IMX_DMA_CHANNELS; i++)
-		if (!imx_dma_request(i, name))
-			return i;
-
-	for (i = best - 1; i >= 0; i--)
-		if (!imx_dma_request(i, name))
-			return i;
-
-	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
-	return -ENODEV;
-}
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-
-static int __init imx_dma_init(void)
-{
-	int ret = 0;
-	int i;
-
-#ifdef CONFIG_ARCH_MX1
-	if (cpu_is_mx1())
-		imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
-	else
-#endif
-#ifdef CONFIG_MACH_MX21
-	if (cpu_is_mx21())
-		imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
-	else
-#endif
-#ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27())
-		imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
-	else
-#endif
-		BUG();
-
-	dma_clk = clk_get(NULL, "dma");
-	clk_enable(dma_clk);
-
-	/* reset DMA module */
-	imx_dmav1_writel(DCR_DRST, DMA_DCR);
-
-#ifdef CONFIG_ARCH_MX1
-	if (cpu_is_mx1()) {
-		ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-		if (ret) {
-			pr_crit("Wow!  Can't register IRQ for DMA\n");
-			return ret;
-		}
-
-		ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-		if (ret) {
-			pr_crit("Wow!  Can't register ERRIRQ for DMA\n");
-			free_irq(MX1_DMA_INT, NULL);
-			return ret;
-		}
-	}
-#endif
-	/* enable DMA module */
-	imx_dmav1_writel(DCR_DEN, DMA_DCR);
-
-	/* clear all interrupts */
-	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR);
-
-	/* disable interrupts */
-	imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR);
-
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		imx_dma_channels[i].sg = NULL;
-		imx_dma_channels[i].dma_num = i;
-	}
-
-	return ret;
-}
-
-arch_initcall(imx_dma_init);
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 2a8646173c2f..9915607683de 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -11,10 +11,6 @@
  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  * for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include <linux/platform_device.h>
@@ -73,7 +69,51 @@
 int mxc_initialize_usb_hw(int port, unsigned int flags)
 {
 	unsigned int v;
-#ifdef CONFIG_ARCH_MX3
+#if defined(CONFIG_ARCH_MX25)
+	if (cpu_is_mx25()) {
+		v = readl(MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX35_OTG_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_OTG_PM_BIT;
+
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX35_H1_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX35_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX35_H1_TLL_BIT;
+
+			if (flags & MXC_EHCI_INTERNAL_PHY)
+				v |= MX35_H1_USBTE_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_DOWN)
+				v |= MX35_H1_IPPUE_DOWN_BIT;
+
+			if (flags & MXC_EHCI_IPPUE_UP)
+				v |= MX35_H1_IPPUE_UP_BIT;
+
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		writel(v, MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+#endif /* CONFIG_ARCH_MX25 */
+#if defined(CONFIG_ARCH_MX3)
 	if (cpu_is_mx31()) {
 		v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
@@ -209,8 +249,8 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 #ifdef CONFIG_ARCH_MX51
 	if (cpu_is_mx51()) {
 		void __iomem *usb_base;
-		u32 usbotg_base;
-		u32 usbother_base;
+		void __iomem *usbotg_base;
+		void __iomem *usbother_base;
 		int ret = 0;
 
 		usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
new file mode 100644
index 000000000000..ee9582f4972e
--- /dev/null
+++ b/arch/arm/plat-mxc/epit.c
@@ -0,0 +1,242 @@
+/*
+ *  linux/arch/arm/plat-mxc/epit.c
+ *
+ *  Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#define EPITCR		0x00
+#define EPITSR		0x04
+#define EPITLR		0x08
+#define EPITCMPR	0x0c
+#define EPITCNR		0x10
+
+#define EPITCR_EN			(1 << 0)
+#define EPITCR_ENMOD			(1 << 1)
+#define EPITCR_OCIEN			(1 << 2)
+#define EPITCR_RLD			(1 << 3)
+#define EPITCR_PRESC(x)			(((x) & 0xfff) << 4)
+#define EPITCR_SWR			(1 << 16)
+#define EPITCR_IOVW			(1 << 17)
+#define EPITCR_DBGEN			(1 << 18)
+#define EPITCR_WAITEN			(1 << 19)
+#define EPITCR_RES			(1 << 20)
+#define EPITCR_STOPEN			(1 << 21)
+#define EPITCR_OM_DISCON		(0 << 22)
+#define EPITCR_OM_TOGGLE		(1 << 22)
+#define EPITCR_OM_CLEAR			(2 << 22)
+#define EPITCR_OM_SET			(3 << 22)
+#define EPITCR_CLKSRC_OFF		(0 << 24)
+#define EPITCR_CLKSRC_PERIPHERAL	(1 << 24)
+#define EPITCR_CLKSRC_REF_HIGH		(1 << 24)
+#define EPITCR_CLKSRC_REF_LOW		(3 << 24)
+
+#define EPITSR_OCIF			(1 << 0)
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+
+static struct clock_event_device clockevent_epit;
+static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+static void __iomem *timer_base;
+
+static inline void epit_irq_disable(void)
+{
+	u32 val;
+
+	val = __raw_readl(timer_base + EPITCR);
+	val &= ~EPITCR_OCIEN;
+	__raw_writel(val, timer_base + EPITCR);
+}
+
+static inline void epit_irq_enable(void)
+{
+	u32 val;
+
+	val = __raw_readl(timer_base + EPITCR);
+	val |= EPITCR_OCIEN;
+	__raw_writel(val, timer_base + EPITCR);
+}
+
+static void epit_irq_acknowledge(void)
+{
+	__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
+}
+
+static cycle_t epit_read(struct clocksource *cs)
+{
+	return 0 - __raw_readl(timer_base + EPITCNR);
+}
+
+static struct clocksource clocksource_epit = {
+	.name		= "epit",
+	.rating		= 200,
+	.read		= epit_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init epit_clocksource_init(struct clk *timer_clk)
+{
+	unsigned int c = clk_get_rate(timer_clk);
+
+	clocksource_epit.mult = clocksource_hz2mult(c,
+					clocksource_epit.shift);
+	clocksource_register(&clocksource_epit);
+
+	return 0;
+}
+
+/* clock event */
+
+static int epit_set_next_event(unsigned long evt,
+			      struct clock_event_device *unused)
+{
+	unsigned long tcmp;
+
+	tcmp = __raw_readl(timer_base + EPITCNR);
+
+	__raw_writel(tcmp - evt, timer_base + EPITCMPR);
+
+	return 0;
+}
+
+static void epit_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	unsigned long flags;
+
+	/*
+	 * The timer interrupt generation is disabled at least
+	 * for enough time to call epit_set_next_event()
+	 */
+	local_irq_save(flags);
+
+	/* Disable interrupt in GPT module */
+	epit_irq_disable();
+
+	if (mode != clockevent_mode) {
+		/* Set event time into far-far future */
+
+		/* Clear pending interrupt */
+		epit_irq_acknowledge();
+	}
+
+	/* Remember timer mode */
+	clockevent_mode = mode;
+	local_irq_restore(flags);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		printk(KERN_ERR "epit_set_mode: Periodic mode is not "
+				"supported for i.MX EPIT\n");
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	/*
+	 * Do not put overhead of interrupt enable/disable into
+	 * epit_set_next_event(), the core has about 4 minutes
+	 * to call epit_set_next_event() or shutdown clock after
+	 * mode switching
+	 */
+		local_irq_save(flags);
+		epit_irq_enable();
+		local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_RESUME:
+		/* Left event sources disabled, no more interrupts appear */
+		break;
+	}
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clockevent_epit;
+
+	epit_irq_acknowledge();
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction epit_timer_irq = {
+	.name		= "i.MX EPIT Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= epit_timer_interrupt,
+};
+
+static struct clock_event_device clockevent_epit = {
+	.name		= "epit",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_mode	= epit_set_mode,
+	.set_next_event	= epit_set_next_event,
+	.rating		= 200,
+};
+
+static int __init epit_clockevent_init(struct clk *timer_clk)
+{
+	unsigned int c = clk_get_rate(timer_clk);
+
+	clockevent_epit.mult = div_sc(c, NSEC_PER_SEC,
+					clockevent_epit.shift);
+	clockevent_epit.max_delta_ns =
+			clockevent_delta2ns(0xfffffffe, &clockevent_epit);
+	clockevent_epit.min_delta_ns =
+			clockevent_delta2ns(0x800, &clockevent_epit);
+
+	clockevent_epit.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&clockevent_epit);
+
+	return 0;
+}
+
+void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+{
+	clk_enable(timer_clk);
+
+	timer_base = base;
+
+	/*
+	 * Initialise to a known state (all timers off, and timing reset)
+	 */
+	__raw_writel(0x0, timer_base + EPITCR);
+
+	__raw_writel(0xffffffff, timer_base + EPITLR);
+	__raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
+			timer_base + EPITCR);
+
+	/* init and register the timer to the framework */
+	epit_clocksource_init(timer_clk);
+	epit_clockevent_init(timer_clk);
+
+	/* Make irqs happen */
+	setup_irq(irq, &epit_timer_irq);
+}
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 71437c61cfd7..9c3e36232b5b 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
@@ -201,11 +202,42 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 	}
 }
 
+/*
+ * Set interrupt number "irq" in the GPIO as a wake-up source.
+ * While system is running, all registered GPIO interrupts need to have
+ * wake-up enabled. When system is suspended, only selected GPIO interrupts
+ * need to have wake-up enabled.
+ * @param  irq          interrupt source number
+ * @param  enable       enable as wake-up if equal to non-zero
+ * @return       This function returns 0 on success.
+ */
+static int gpio_set_wake_irq(u32 irq, u32 enable)
+{
+	u32 gpio = irq_to_gpio(irq);
+	u32 gpio_idx = gpio & 0x1F;
+	struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
+
+	if (enable) {
+		if (port->irq_high && (gpio_idx >= 16))
+			enable_irq_wake(port->irq_high);
+		else
+			enable_irq_wake(port->irq);
+	} else {
+		if (port->irq_high && (gpio_idx >= 16))
+			disable_irq_wake(port->irq_high);
+		else
+			disable_irq_wake(port->irq);
+	}
+
+	return 0;
+}
+
 static struct irq_chip gpio_irq_chip = {
 	.ack = gpio_ack_irq,
 	.mask = gpio_mask_irq,
 	.unmask = gpio_unmask_irq,
 	.set_type = gpio_set_irq_type,
+	.set_wake = gpio_set_wake_irq,
 };
 
 static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
@@ -214,13 +246,16 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
 	struct mxc_gpio_port *port =
 		container_of(chip, struct mxc_gpio_port, chip);
 	u32 l;
+	unsigned long flags;
 
+	spin_lock_irqsave(&port->lock, flags);
 	l = __raw_readl(port->base + GPIO_GDIR);
 	if (dir)
 		l |= 1 << offset;
 	else
 		l &= ~(1 << offset);
 	__raw_writel(l, port->base + GPIO_GDIR);
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -229,9 +264,12 @@ static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 		container_of(chip, struct mxc_gpio_port, chip);
 	void __iomem *reg = port->base + GPIO_DR;
 	u32 l;
+	unsigned long flags;
 
-	l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset);
+	spin_lock_irqsave(&port->lock, flags);
+	l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset);
 	__raw_writel(l, reg);
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -285,6 +323,8 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		port[i].chip.base = i * 32;
 		port[i].chip.ngpio = 32;
 
+		spin_lock_init(&port[i].lock);
+
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
@@ -292,6 +332,12 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 			/* setup one handler for each entry */
 			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 			set_irq_data(port[i].irq, &port[i]);
+			if (port[i].irq_high) {
+				/* setup handler for GPIO 16 to 31 */
+				set_irq_chained_handler(port[i].irq_high,
+						mx3_gpio_irq_handler);
+				set_irq_data(port[i].irq_high, &port[i]);
+			}
 		}
 	}
 
diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
new file mode 100644
index 000000000000..a384fdd49c62
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_3DS_DB_H__
+#define __ASM_ARCH_MXC_3DS_DB_H__
+
+extern int __init mxc_expio_init(u32 base, u32 p_irq);
+
+#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
deleted file mode 100644
index 0376c133c9f4..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
- * All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
deleted file mode 100644
index a1fd5830af48..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on board-pcm038.h which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
-#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx27_init().
- *
- * This example here is for the development board. Refer
- * eukrea_mbimx27-baseboard.c
- */
-
-extern void eukrea_mbimx27_baseboard_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
deleted file mode 100644
index 93cc66f104c7..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H
-#define __ARM_ARCH_BOARD_KZM_ARM11_H
-
-/*
- *  KZM-ARM11-01 Board Control Registers on FPGA
- */
-#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
-
-/*
- * External UART for touch panel on FPGA
- */
-#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
-
-#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
-
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
deleted file mode 100644
index 0cf4fa29510c..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
-
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR   0xF5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
-
-#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
-		(MX21ADS_MMIO_BASE_ADDR + (offset))
-
-#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
-#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
-
-/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP        0x0001 /* read */
-#define MX21ADS_IO_TP6          0x0001 /* write */
-#define MX21ADS_IO_SW_SEL       0x0002 /* read */
-#define MX21ADS_IO_TP7          0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE   0x0008
-#define MX21ADS_IO_CSI_CTL2     0x0010
-#define MX21ADS_IO_CSI_CTL1     0x0020
-#define MX21ADS_IO_CSI_CTL0     0x0040
-#define MX21ADS_IO_UART1_EN     0x0080
-#define MX21ADS_IO_UART4_EN     0x0100
-#define MX21ADS_IO_LCDON        0x0200
-#define MX21ADS_IO_IRDA_EN      0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B   0x1000
-#define MX21ADS_IO_IRDA_MD1     0x2000
-#define MX21ADS_IO_LED4_ON      0x4000
-#define MX21ADS_IO_LED3_ON      0x8000
-
-#endif				/* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
deleted file mode 100644
index 7776d230327f..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
-
-/* external interrupt multiplexer */
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-
-#define MXC_VIRTUAL_INTS_BASE	(MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
-#define MXC_SDIO1_CARD_IRQ	MXC_VIRTUAL_INTS_BASE
-#define MXC_SDIO2_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 1)
-#define MXC_SDIO3_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 2)
-
-#define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
-				MXC_MAX_VIRTUAL_INTS)
-
-/*
- * @name Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE          SZ_128M
-
-/*
- * PBC Controller parameters
- */
-
-/*
- * Base address of PBC controller, CS4
- */
-#define PBC_BASE_ADDRESS        0xf4300000
-#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
-		(PBC_BASE_ADDRESS + (offset))
-
-/*
- * PBC Interupt name definitions
- */
-#define PBC_GPIO1_0  0
-#define PBC_GPIO1_1  1
-#define PBC_GPIO1_2  2
-#define PBC_GPIO1_3  3
-#define PBC_GPIO1_4  4
-#define PBC_GPIO1_5  5
-
-#define PBC_INTR_MAX_NUM 6
-#define PBC_INTR_SHARED_MAX_NUM 8
-
-/* When the PBC address connection is fixed in h/w, defined as 1 */
-#define PBC_ADDR_SH             0
-
-/* Offsets for the PBC Controller register */
-/*
- * PBC Board version register offset
- */
-#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 set address.
- */
-#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 clear address.
- */
-#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 set address.
- */
-#define PBC_BCTRL2_SET_REG      PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 2 clear address.
- */
-#define PBC_BCTRL2_CLEAR_REG    PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL3_SET_REG      PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 clear address.
- */
-#define PBC_BCTRL3_CLEAR_REG    PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH)
-/*
- * PBC Board control register 3 set address.
- */
-#define PBC_BCTRL4_SET_REG      PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 4 clear address.
- */
-#define PBC_BCTRL4_CLEAR_REG    PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH)
-/*PBC_ADDR_SH
- * PBC Board status register 1.
- */
-#define PBC_BSTAT1_REG          PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt status register.
- */
-#define PBC_INTSTATUS_REG       PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH)
-/*
- * PBC Board interrupt current status register.
- */
-#define PBC_INTCURR_STATUS_REG  PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register set address.
- */
-#define PBC_INTMASK_SET_REG     PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH)
-/*
- * PBC Interrupt mask register clear address.
- */
-#define PBC_INTMASK_CLEAR_REG   PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH)
-/*
- * External UART A.
- */
-#define PBC_SC16C652_UARTA_REG  PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Status.
- */
-#define PBC_UART_STATUS_REG     PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Set.
- */
-#define PBC_UCTRL_SET_REG       PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH)
-/*
- * UART 4 Expanding Signal Control Clear.
- */
-#define PBC_UCTRL_CLR_REG       PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller IO base address.
- */
-#define PBC_CS8900A_IOBASE_REG  PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller Memory base address.
- */
-#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH)
-/*
- * Ethernet Controller DMA base address.
- */
-#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH)
-
-/* PBC Board Version Register bit definition */
-#define PBC_VERSION_ADS         0x8000	/* Bit15=1 means version for ads */
-#define PBC_VERSION_EVB_REVB    0x4000	/* BIT14=1 means version for evb revb */
-
-/* PBC Board Control Register 1 bit definitions */
-#define PBC_BCTRL1_ERST         0x0001	/* Ethernet Reset */
-#define PBC_BCTRL1_URST         0x0002	/* Reset External UART controller */
-#define PBC_BCTRL1_FRST         0x0004	/* FEC Reset */
-#define PBC_BCTRL1_ESLEEP       0x0010	/* Enable ethernet Sleep */
-#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
-
-/* PBC Board Control Register 2 bit definitions */
-#define PBC_BCTRL2_VCC_EN       0x0004	/*   Enable VCC */
-#define PBC_BCTRL2_VPP_EN       0x0008	/*   Enable Vpp */
-#define PBC_BCTRL2_ATAFEC_EN    0X0010
-#define PBC_BCTRL2_ATAFEC_SEL   0X0020
-#define PBC_BCTRL2_ATA_EN       0X0040
-#define PBC_BCTRL2_IRDA_SD      0X0080
-#define PBC_BCTRL2_IRDA_EN      0X0100
-#define PBC_BCTRL2_CCTL10       0X0200
-#define PBC_BCTRL2_CCTL11       0X0400
-
-/* PBC Board Control Register 3 bit definitions */
-#define PBC_BCTRL3_HSH_EN       0X0020
-#define PBC_BCTRL3_FSH_MOD      0X0040
-#define PBC_BCTRL3_OTG_HS_EN    0X0080
-#define PBC_BCTRL3_OTG_VBUS_EN  0X0100
-#define PBC_BCTRL3_FSH_VBUS_EN  0X0200
-#define PBC_BCTRL3_USB_OTG_ON   0X0800
-#define PBC_BCTRL3_USB_FSH_ON   0X1000
-
-/* PBC Board Control Register 4 bit definitions */
-#define PBC_BCTRL4_REGEN_SEL    0X0001
-#define PBC_BCTRL4_USER_OFF     0X0002
-#define PBC_BCTRL4_VIB_EN       0X0004
-#define PBC_BCTRL4_PWRGT1_EN    0X0008
-#define PBC_BCTRL4_PWRGT2_EN    0X0010
-#define PBC_BCTRL4_STDBY_PRI    0X0020
-
-#ifndef __ASSEMBLY__
-/*
- * Enumerations for SD cards and memory stick card. This corresponds to
- * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN.
- */
-enum mxc_card_no {
-	MXC_CARD_SD2 = 0,
-	MXC_CARD_SD3,
-	MXC_CARD_MS,
-	MXC_CARD_SD1,
-	MXC_CARD_MIN = MXC_CARD_SD2,
-	MXC_CARD_MAX = MXC_CARD_SD1,
-};
-#endif
-
-#define MXC_CPLD_VER_1_50       0x01
-
-/*
- * PBC BSTAT Register bit definitions
- */
-#define PBC_BSTAT_PRI_INT       0X0001
-#define PBC_BSTAT_USB_BYP       0X0002
-#define PBC_BSTAT_ATA_IOCS16    0X0004
-#define PBC_BSTAT_ATA_CBLID     0X0008
-#define PBC_BSTAT_ATA_DASP      0X0010
-#define PBC_BSTAT_PWR_RDY       0X0020
-#define PBC_BSTAT_SD3_WP        0X0100
-#define PBC_BSTAT_SD2_WP        0X0200
-#define PBC_BSTAT_SD1_WP        0X0400
-#define PBC_BSTAT_SD3_DET       0X0800
-#define PBC_BSTAT_SD2_DET       0X1000
-#define PBC_BSTAT_SD1_DET       0X2000
-#define PBC_BSTAT_MS_DET        0X4000
-#define PBC_BSTAT_SD3_DET_BIT   11
-#define PBC_BSTAT_SD2_DET_BIT   12
-#define PBC_BSTAT_SD1_DET_BIT   13
-#define PBC_BSTAT_MS_DET_BIT    14
-#define MXC_BSTAT_BIT(n)        ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \
-				 ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \
-				 ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \
-				 ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \
-					0x0))))
-
-/*
- * PBC UART Control Register bit definitions
- */
-#define PBC_UCTRL_DCE_DCD       0X0001
-#define PBC_UCTRL_DCE_DSR       0X0002
-#define PBC_UCTRL_DCE_RI        0X0004
-#define PBC_UCTRL_DTE_DTR       0X0100
-
-/*
- * PBC UART Status Register bit definitions
- */
-#define PBC_USTAT_DTE_DCD       0X0001
-#define PBC_USTAT_DTE_DSR       0X0002
-#define PBC_USTAT_DTE_RI        0X0004
-#define PBC_USTAT_DCE_DTR       0X0100
-
-/*
- * PBC Interupt mask register bit definitions
- */
-#define PBC_INTR_SD3_R_EN_BIT   4
-#define PBC_INTR_SD2_R_EN_BIT   0
-#define PBC_INTR_SD1_R_EN_BIT   6
-#define PBC_INTR_MS_R_EN_BIT    5
-#define PBC_INTR_SD3_EN_BIT     13
-#define PBC_INTR_SD2_EN_BIT     12
-#define PBC_INTR_MS_EN_BIT      14
-#define PBC_INTR_SD1_EN_BIT     15
-
-#define PBC_INTR_SD2_R_EN       0x0001
-#define PBC_INTR_LOW_BAT        0X0002
-#define PBC_INTR_OTG_FSOVER     0X0004
-#define PBC_INTR_FSH_OVER       0X0008
-#define PBC_INTR_SD3_R_EN       0x0010
-#define PBC_INTR_MS_R_EN        0x0020
-#define PBC_INTR_SD1_R_EN       0x0040
-#define PBC_INTR_FEC_INT        0X0080
-#define PBC_INTR_ENET_INT       0X0100
-#define PBC_INTR_OTGFS_INT      0X0200
-#define PBC_INTR_XUART_INT      0X0400
-#define PBC_INTR_CCTL12         0X0800
-#define PBC_INTR_SD2_EN         0x1000
-#define PBC_INTR_SD3_EN         0x2000
-#define PBC_INTR_MS_EN          0x4000
-#define PBC_INTR_SD1_EN         0x8000
-
-
-
-/* For interrupts like xuart, enet etc */
-#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX27_PIN_TIN)
-#define MXC_MAX_EXP_IO_LINES    16
-
-/*
- * This corresponds to PBC_INTMASK_SET_REG at offset 0x38.
- *
- */
-#define EXPIO_INT_LOW_BAT       (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR    (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR       (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4          (MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5          (MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6          (MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_FEC           (MXC_EXP_IO_BASE + 7)
-#define EXPIO_INT_ENET_INT      (MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT    (MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA    (MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_CCTL12_INT    (MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SD2_EN        (MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_SD3_EN        (MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_MS_EN         (MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_SD1_EN        (MXC_EXP_IO_BASE + 15)
-
-/*
- * This is System IRQ used by CS8900A for interrupt generation
- * taken from platform.h
- */
-#define CS8900AIRQ              EXPIO_INT_ENET_INT
-/* This is I/O Base address used to access registers of CS8900A on MXC ADS */
-#define CS8900A_BASE_ADDRESS    (PBC_CS8900A_IOBASE_REG + 0x300)
-
-#define MXC_PMIC_INT_LINE       IOMUX_TO_IRQ(MX27_PIN_TOUT)
-
-/*
-* This is used to detect if the CPLD version is for mx27 evb board rev-a
-*/
-#define PBC_CPLD_VERSION_IS_REVA() \
-	((__raw_readw(PBC_VERSION_REG) & \
-	(PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\
-	== 0)
-
-/* This is used to active or inactive ata signal in CPLD .
- *  It is dependent with hardware
- */
-#define PBC_ATA_SIGNAL_ACTIVE() \
-	__raw_writew(           \
-		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-		PBC_BCTRL2_CLEAR_REG)
-
-#define PBC_ATA_SIGNAL_INACTIVE() \
-	__raw_writew(  \
-		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
-		PBC_BCTRL2_SET_REG)
-
-#define MXC_BD_LED1             (1 << 5)
-#define MXC_BD_LED2             (1 << 6)
-#define MXC_BD_LED_ON(led) \
-	__raw_writew(led, PBC_BCTRL1_SET_REG)
-#define MXC_BD_LED_OFF(led) \
-	__raw_writew(led, PBC_BCTRL1_CLEAR_REG)
-
-/* to determine the correct external crystal reference */
-#define CKIH_27MHZ_BIT_SET      (1 << 3)
-
-#endif				/* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
deleted file mode 100644
index ea87551d2736..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
deleted file mode 100644
index fec1bcfa9164..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
deleted file mode 100644
index da92933a233b..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
-
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR		CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
-
-/* LED switchs */
-#define CPLD_LED_REG			(CPLD_ADDR + 0x00)
-/* buttons */
-#define CPLD_SWITCH_BUTTONS_REG	(EXPIO_ADDR + 0x08)
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
-/* module reset register */
-#define CPLD_MODULE_RESET_REG		(CPLD_ADDR + 0x60)
-/* CPU ID and Personality ID */
-#define CPLD_MCU_BOARD_ID_REG		(CPLD_ADDR + 0x68)
-
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_XUART_A	(MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_XUART_B	(MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_BUTTON_A	(MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_BUTTON_B	(MXC_EXP_IO_BASE + 4)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 095a199591c6..94b60dd47137 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -13,105 +13,21 @@
 
 #include <mach/hardware.h>
 
+/*
+ * These symbols are used by drivers/net/cs89x0.c.
+ * This is ugly as hell, but we have to provide them until
+ * someone fixed the driver.
+ */
+
 /* Base address of PBC controller */
 #define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
 /* Offsets for the PBC Controller register */
 
-/* PBC Board status register offset */
-#define PBC_BSTAT               0x000002
-
-/* PBC Board control register 1 set address */
-#define PBC_BCTRL1_SET          0x000004
-
-/* PBC Board control register 1 clear address */
-#define PBC_BCTRL1_CLEAR        0x000006
-
-/* PBC Board control register 2 set address */
-#define PBC_BCTRL2_SET          0x000008
-
-/* PBC Board control register 2 clear address */
-#define PBC_BCTRL2_CLEAR        0x00000A
-
-/* PBC Board control register 3 set address */
-#define PBC_BCTRL3_SET          0x00000C
-
-/* PBC Board control register 3 clear address */
-#define PBC_BCTRL3_CLEAR        0x00000E
-
-/* PBC Board control register 4 set address */
-#define PBC_BCTRL4_SET          0x000010
-
-/* PBC Board control register 4 clear address */
-#define PBC_BCTRL4_CLEAR        0x000012
-
-/* PBC Board status register 1 */
-#define PBC_BSTAT1              0x000014
-
-/* PBC Board interrupt status register */
-#define PBC_INTSTATUS           0x000016
-
-/* PBC Board interrupt current status register */
-#define PBC_INTCURR_STATUS      0x000018
-
-/* PBC Interrupt mask register set address */
-#define PBC_INTMASK_SET         0x00001A
-
-/* PBC Interrupt mask register clear address */
-#define PBC_INTMASK_CLEAR       0x00001C
-
-/* External UART A */
-#define PBC_SC16C652_UARTA      0x010000
-
-/* External UART B */
-#define PBC_SC16C652_UARTB      0x010010
-
 /* Ethernet Controller IO base address */
 #define PBC_CS8900A_IOBASE      0x020000
 
-/* Ethernet Controller Memory base address */
-#define PBC_CS8900A_MEMBASE     0x021000
-
-/* Ethernet Controller DMA base address */
-#define PBC_CS8900A_DMABASE     0x022000
-
-/* External chip select 0 */
-#define PBC_XCS0                0x040000
-
-/* LCD Display enable */
-#define PBC_LCD_EN_B            0x060000
-
-/* Code test debug enable */
-#define PBC_CODE_B              0x070000
-
-/* PSRAM memory select */
-#define PBC_PSRAM_B             0x5000000
-
-#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
-#define PBC_INTCURR_STATUS_REG	(PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
-#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
-#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
-
 #define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
 
-#define EXPIO_INT_LOW_BAT	(MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_PB_IRQ	(MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_OTG_FS_OVR	(MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_FSH_OVR	(MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_RES4		(MXC_EXP_IO_BASE + 4)
-#define EXPIO_INT_RES5		(MXC_EXP_IO_BASE + 5)
-#define EXPIO_INT_RES6		(MXC_EXP_IO_BASE + 6)
-#define EXPIO_INT_RES7		(MXC_EXP_IO_BASE + 7)
 #define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
-#define EXPIO_INT_OTG_FS_INT	(MXC_EXP_IO_BASE + 9)
-#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
-#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
-#define EXPIO_INT_SYNTH_IRQ	(MXC_EXP_IO_BASE + 12)
-#define EXPIO_INT_CE_INT1	(MXC_EXP_IO_BASE + 13)
-#define EXPIO_INT_CE_INT2	(MXC_EXP_IO_BASE + 14)
-#define EXPIO_INT_RES15		(MXC_EXP_IO_BASE + 15)
-
-#define MXC_MAX_EXP_IO_LINES	16
 
 #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index eb5a5024622e..0df71bfefbb1 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -31,7 +31,7 @@ enum mx31lilly_boards {
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31lilly_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 2b2da0367578..c1ad0ae807cc 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -32,7 +32,7 @@ enum mx31lite_boards {
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31lite_db_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 36ff3cedee1a..de14543891cf 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -31,7 +31,7 @@ enum mx31moboard_boards {
 
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  */
 
 extern void mx31moboard_devboard_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
deleted file mode 100644
index 383f1c04df06..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
deleted file mode 100644
index 13411709b13a..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
-#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 410f9786ed22..6f371e35753d 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -22,7 +22,7 @@
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
+ * its own devices, it calls the baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
  * inside pcm038_init().
  *
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
deleted file mode 100644
index 1ac4e1682e5c..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
-#define __ASM_ARCH_MXC_BOARD_PCM043_H__
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
deleted file mode 100644
index 6d88c7af4b23..000000000000
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
-#define __ASM_ARCH_MXC_BOARD_QONG_H__
-
-/* NOR FLASH */
-#define QONG_NOR_SIZE		(128*1024*1024)
-
-#endif /* __ASM_ARCH_MXC_BOARD_QONG_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 2941472582d2..7a1e1f89ff09 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -32,6 +32,7 @@ extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
 extern void mx51_init_irq(void);
 extern void mxc91231_init_irq(void);
+extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 0b6e11eaeb8c..d56213fb901b 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -23,8 +23,8 @@
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
 #include <mach/mx25.h>
-#define UART_PADDR	UART1_BASE_ADDR
-#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR	MX25_UART1_BASE_ADDR
+#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(MX25_UART1_BASE_ADDR)
 #endif
 
 #ifdef CONFIG_ARCH_MX2
@@ -62,11 +62,9 @@
 #define UART_PADDR	MXC91231_UART2_BASE_ADDR
 #define UART_VADDR	MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =UART_PADDR	@ physical
-		ldrne	\rx, =UART_VADDR	@ virtual
+		.macro	addruart, rp, rv
+		ldr	\rp, =UART_PADDR	@ physical
+		ldr	\rv, =UART_VADDR	@ virtual
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
new file mode 100644
index 000000000000..8c6896fd1e5f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+struct platform_device *imx_add_platform_device(const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data);
+
+#include <linux/fec.h>
+struct imx_fec_data {
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_fec(
+		const struct imx_fec_data *data,
+		const struct fec_platform_data *pdata);
+
+#include <linux/can/platform/flexcan.h>
+struct platform_device *__init imx_add_flexcan(int id,
+		resource_size_t iobase, resource_size_t iosize,
+		resource_size_t irq,
+		const struct flexcan_platform_data *pdata);
+
+#include <linux/gpio_keys.h>
+struct platform_device *__init imx_add_gpio_keys(
+		const struct gpio_keys_platform_data *pdata);
+
+#include <mach/i2c.h>
+struct imx_imx_i2c_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_i2c(
+		const struct imx_imx_i2c_data *data,
+		const struct imxi2c_platform_data *pdata);
+
+#include <mach/ssi.h>
+struct imx_imx_ssi_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+	resource_size_t dmatx0;
+	resource_size_t dmarx0;
+	resource_size_t dmatx1;
+	resource_size_t dmarx1;
+};
+struct platform_device *__init imx_add_imx_ssi(
+		const struct imx_imx_ssi_data *data,
+		const struct imx_ssi_platform_data *pdata);
+
+#include <mach/imx-uart.h>
+struct imx_imx_uart_3irq_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irqrx;
+	resource_size_t irqtx;
+	resource_size_t irqrts;
+};
+struct platform_device *__init imx_add_imx_uart_3irq(
+		const struct imx_imx_uart_3irq_data *data,
+		const struct imxuart_platform_data *pdata);
+
+struct imx_imx_uart_1irq_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_uart_1irq(
+		const struct imx_imx_uart_1irq_data *data,
+		const struct imxuart_platform_data *pdata);
+
+#include <mach/mxc_nand.h>
+struct imx_mxc_nand_data {
+	/*
+	 * id is traditionally 0, but -1 is more appropriate.  We use -1 for new
+	 * machines but don't change existing devices as the nand device usually
+	 * appears in the kernel command line to pass its partitioning.
+	 */
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t axibase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_nand(
+		const struct imx_mxc_nand_data *data,
+		const struct mxc_nand_platform_data *pdata);
+
+#include <mach/spi.h>
+struct imx_spi_imx_data {
+	const char *devid;
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	int irq;
+};
+struct platform_device *__init imx_add_spi_imx(
+		const struct imx_spi_imx_data *data,
+		const struct spi_imx_master *pdata);
+
+#include <mach/esdhc.h>
+struct imx_esdhc_imx_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_esdhc(
+		const struct imx_esdhc_imx_data *data,
+		const struct esdhc_platform_data *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
deleted file mode 100644
index 7c4870bd5a21..000000000000
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- *  linux/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
- *
- *  i.MX DMA registration and IRQ dispatching
- *
- * Copyright 2006 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Copyright 2008 Juergen Beisert, <kernel@pengutronix.de>
- * Copyright 2008 Sascha Hauer, <s.hauer@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_DMA_H
-#define __ASM_ARCH_MXC_DMA_H
-
-#define IMX_DMA_CHANNELS  16
-
-#define DMA_MODE_READ		0
-#define DMA_MODE_WRITE		1
-#define DMA_MODE_MASK		1
-
-#define MX1_DMA_REG(offset)	MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset))
-
-/* DMA Interrupt Mask Register */
-#define MX1_DMA_DIMR		MX1_DMA_REG(0x08)
-
-/* Channel Control Register */
-#define MX1_DMA_CCR(x)		MX1_DMA_REG(0x8c + ((x) << 6))
-
-#define IMX_DMA_MEMSIZE_32	(0 << 4)
-#define IMX_DMA_MEMSIZE_8	(1 << 4)
-#define IMX_DMA_MEMSIZE_16	(2 << 4)
-#define IMX_DMA_TYPE_LINEAR	(0 << 10)
-#define IMX_DMA_TYPE_2D		(1 << 10)
-#define IMX_DMA_TYPE_FIFO	(2 << 10)
-
-#define IMX_DMA_ERR_BURST     (1 << 0)
-#define IMX_DMA_ERR_REQUEST   (1 << 1)
-#define IMX_DMA_ERR_TRANSFER  (1 << 2)
-#define IMX_DMA_ERR_BUFFER    (1 << 3)
-#define IMX_DMA_ERR_TIMEOUT   (1 << 4)
-
-int
-imx_dma_config_channel(int channel, unsigned int config_port,
-	unsigned int config_mem, unsigned int dmareq, int hw_chaining);
-
-void
-imx_dma_config_burstlen(int channel, unsigned int burstlen);
-
-int
-imx_dma_setup_single(int channel, dma_addr_t dma_address,
-		unsigned int dma_length, unsigned int dev_addr,
-		unsigned int dmamode);
-
-
-/*
- * Use this flag as the dma_length argument to imx_dma_setup_sg()
- * to create an endless running dma loop. The end of the scatterlist
- * must be linked to the beginning for this to work.
- */
-#define IMX_DMA_LENGTH_LOOP	((unsigned int)-1)
-
-int
-imx_dma_setup_sg(int channel, struct scatterlist *sg,
-		unsigned int sgcount, unsigned int dma_length,
-		unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(int channel,
-		void (*irq_handler) (int, void *),
-		void (*err_handler) (int, void *, int), void *data);
-
-int
-imx_dma_setup_progression_handler(int channel,
-		void (*prog_handler) (int, void*, struct scatterlist*));
-
-void imx_dma_enable(int channel);
-
-void imx_dma_disable(int channel);
-
-int imx_dma_request(int channel, const char *name);
-
-void imx_dma_free(int channel);
-
-enum imx_dma_prio {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-};
-
-int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
-
-#endif	/* _ASM_ARCH_MXC_DMA_H */
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
new file mode 100644
index 000000000000..ef7751546f5f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/dma.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_DMA_H__
+#define __ASM_ARCH_MXC_DMA_H__
+
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+
+/*
+ * This enumerates peripheral types. Used for SDMA.
+ */
+enum sdma_peripheral_type {
+	IMX_DMATYPE_SSI,	/* MCU domain SSI */
+	IMX_DMATYPE_SSI_SP,	/* Shared SSI */
+	IMX_DMATYPE_MMC,	/* MMC */
+	IMX_DMATYPE_SDHC,	/* SDHC */
+	IMX_DMATYPE_UART,	/* MCU domain UART */
+	IMX_DMATYPE_UART_SP,	/* Shared UART */
+	IMX_DMATYPE_FIRI,	/* FIRI */
+	IMX_DMATYPE_CSPI,	/* MCU domain CSPI */
+	IMX_DMATYPE_CSPI_SP,	/* Shared CSPI */
+	IMX_DMATYPE_SIM,	/* SIM */
+	IMX_DMATYPE_ATA,	/* ATA */
+	IMX_DMATYPE_CCM,	/* CCM */
+	IMX_DMATYPE_EXT,	/* External peripheral */
+	IMX_DMATYPE_MSHC,	/* Memory Stick Host Controller */
+	IMX_DMATYPE_MSHC_SP,	/* Shared Memory Stick Host Controller */
+	IMX_DMATYPE_DSP,	/* DSP */
+	IMX_DMATYPE_MEMORY,	/* Memory */
+	IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */
+	IMX_DMATYPE_SPDIF,	/* SPDIF */
+	IMX_DMATYPE_IPU_MEMORY,	/* IPU Memory */
+	IMX_DMATYPE_ASRC,	/* ASRC */
+	IMX_DMATYPE_ESAI,	/* ESAI */
+};
+
+enum imx_dma_prio {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+};
+
+struct imx_dma_data {
+	int dma_request; /* DMA request line */
+	enum sdma_peripheral_type peripheral_type;
+	int priority;
+};
+
+static inline int imx_dma_is_ipu(struct dma_chan *chan)
+{
+	return !strcmp(dev_name(chan->device->dev), "ipu-core");
+}
+
+static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
+{
+	return !strcmp(dev_name(chan->device->dev), "imx-sdma") ||
+		!strcmp(dev_name(chan->device->dev), "imx-dma");
+}
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h
new file mode 100644
index 000000000000..a48a9aaa56b1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/esdhc.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#ifndef __ASM_ARCH_IMX_ESDHC_H
+#define __ASM_ARCH_IMX_ESDHC_H
+
+struct esdhc_platform_data {
+	unsigned int wp_gpio;	/* write protect pin */
+};
+#endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
new file mode 100644
index 000000000000..a21d3313f994
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on board-pcm038.h which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_EUKREA_BASEBOARDS_H__
+#define __MACH_EUKREA_BASEBOARDS_H__
+
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
+ * eukrea_cpuimx35_init() eukrea_cpuimx51_init()
+ * or eukrea_cpuimx51sd_init().
+ *
+ * This example here is for the development board. Refer
+ * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
+ * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
+ * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
+ * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
+ * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd
+ */
+
+extern void eukrea_mbimxsd25_baseboard_init(void);
+extern void eukrea_mbimx27_baseboard_init(void);
+extern void eukrea_mbimxsd35_baseboard_init(void);
+extern void eukrea_mbimx51_baseboard_init(void);
+extern void eukrea_mbimxsd51_baseboard_init(void);
+
+#endif
+
+#endif /* __MACH_EUKREA_BASEBOARDS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 894d2f87c856..af33b74f569e 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -19,6 +19,7 @@
 #ifndef __ASM_ARCH_MXC_GPIO_H__
 #define __ASM_ARCH_MXC_GPIO_H__
 
+#include <linux/spinlock.h>
 #include <mach/hardware.h>
 #include <asm-generic/gpio.h>
 
@@ -33,9 +34,11 @@
 struct mxc_gpio_port {
 	void __iomem *base;
 	int irq;
+	int irq_high;
 	int virtual_irq_start;
 	struct gpio_chip chip;
 	u32 both_edges;
+	spinlock_t lock;
 };
 
 int mxc_gpio_init(struct mxc_gpio_port*, int);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index f39220d1b67a..d7f52c91f82e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -252,6 +252,7 @@
 #define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CONTRAST__PWM4_PWMO	IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
@@ -371,30 +372,41 @@
 #define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
+#define KPP_CTL_ROW	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define KPP_CTL_COL	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW0__GPIO_2_29	IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW1__GPIO_2_30	IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW2__CSI_D0	IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
 #define MX25_PAD_KPP_ROW2__GPIO_2_31	IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW)
 #define MX25_PAD_KPP_ROW3__CSI_LD1	IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
 #define MX25_PAD_KPP_ROW3__GPIO_3_0	IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL0__AUD5_TXD	IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL0__GPIO_3_1	IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL1__AUD5_RXD	IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL1__GPIO_3_2	IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL2__UART4_RTS	IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL2__AUD5_TXC	IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL2__GPIO_3_3	IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL)
+#define MX25_PAD_KPP_COL3__UART4_CTS	IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_KPP_COL3__AUD5_TXFS	IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index ab0f95d953d0..d7a41e9a2605 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -27,8 +27,8 @@ typedef enum iomux_config {
 	IOMUX_CONFIG_ALT5,
 	IOMUX_CONFIG_ALT6,
 	IOMUX_CONFIG_ALT7,
-	IOMUX_CONFIG_GPIO,	/* added to help user use GPIO mode */
-	IOMUX_CONFIG_SION = 0x1 << 4,	/* LOOPBACK:MUX SION bit */
+	IOMUX_CONFIG_GPIO,      /* added to help user use GPIO mode */
+	IOMUX_CONFIG_SION = 0x1 << 4,   /* LOOPBACK:MUX SION bit */
 } iomux_pin_cfg_t;
 
 /* Pad control groupings */
@@ -38,297 +38,350 @@ typedef enum iomux_config {
 				PAD_CTL_SRE_FAST)
 #define MX51_UART3_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
 				PAD_CTL_SRE_FAST)
+#define MX51_I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
+				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
 #define MX51_USBH1_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
 				PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
 				PAD_CTL_PKE | PAD_CTL_HYS)
 #define MX51_GPIO_PAD_CTRL		(PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \
 				PAD_CTL_SRE_FAST)
+#define MX51_GPIO_PAD_CTRL_2	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+					PAD_CTL_PUS_100K_UP)
+#define MX51_ECSPI_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_SRE_FAST)
+#define MX51_SDHCI_PAD_CTRL	(PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \
+				PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_SRE_FAST | \
+				PAD_CTL_DVS)
 
-/*
- * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named
- * GPIO_<unit>_<num> see also iomux-v3.h
- */
+#define MX51_PAD_CTRL_1	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+					PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_HYS)
+#define MX51_PAD_CTRL_2	(PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX51_PAD_CTRL_3	(PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_CTRL_4	(PAD_CTL_DVS | PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX51_PAD_CTRL_5	(PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
 
 /*
- * FIXME: This was converted using scripts from existing Freescale code to
- * this form used upstream. Need to verify the name format.
+ * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux-v3.h
  */
 
-/*						PAD      MUX   ALT INPSE PATH PADCTRL */
-
-#define MX51_PAD_GPIO_2_0__EIM_D16	IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_1__EIM_D17	IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_2__EIM_D18	IOMUX_PAD(0x3f8, 0x064, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_3__EIM_D19	IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_4__EIM_D20	IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_5__EIM_D21	IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__GPIO_2_5	IOMUX_PAD(0x404, 0x070, IOMUX_CONFIG_ALT1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_6__EIM_D22	IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_7__EIM_D23	IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
-
-/* Babbage UART3 */
-#define MX51_PAD_EIM_D24__UART3_CTS	IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART3_RXD	IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART3_TXD	IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D27__UART3_RTS	IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL)
-
-#define MX51_PAD_EIM_D28__EIM_D28	IOMUX_PAD(0x420, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__EIM_D29	IOMUX_PAD(0x424, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__EIM_D30	IOMUX_PAD(0x428, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__EIM_D31	IOMUX_PAD(0x42c, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_2_10__EIM_A16	IOMUX_PAD(0x430, 0x09c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_11__EIM_A17	IOMUX_PAD(0x434, 0x0a0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_12__EIM_A18	IOMUX_PAD(0x438, 0x0a4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_13__EIM_A19	IOMUX_PAD(0x43c, 0x0a8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_14__EIM_A20	IOMUX_PAD(0x440, 0x0ac, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_15__EIM_A21	IOMUX_PAD(0x444, 0x0b0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_16__EIM_A22	IOMUX_PAD(0x448, 0x0b4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_17__EIM_A23	IOMUX_PAD(0x44c, 0x0b8, 1, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_2_18__EIM_A24	IOMUX_PAD(0x450, 0x0bc, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_19__EIM_A25	IOMUX_PAD(0x454, 0x0c0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_20__EIM_A26	IOMUX_PAD(0x458, 0x0c4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_21__EIM_A27	IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB0__EIM_EB0	IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB1__EIM_EB1	IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_22__EIM_EB2	IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_23__EIM_EB3	IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_2_24__EIM_OE	IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_25__EIM_CS0	IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_26__EIM_CS1	IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_27__EIM_CS2	IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_28__EIM_CS3	IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_29__EIM_CS4	IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_30__EIM_CS5	IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_2_31__EIM_DTACK	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_GPIO_3_1__EIM_LBA	IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_2__EIM_CRE	IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__DRAM_CS1	IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_3__NANDF_WE_B	IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_4__NANDF_RE_B	IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_5__NANDF_ALE	IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_6__NANDF_CLE	IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_7__NANDF_WP_B	IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_8__NANDF_RB0	IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_9__NANDF_RB1	IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_10__NANDF_RB2	IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_11__NANDF_RB3	IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_12__GPIO_NAND	IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
-/* REVISIT: Not sure of these values
-
-  #define MX51_PAD_GPIO_1___NANDF_RB4	IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL)
-  #define MX51_PAD_GPIO_3_13__NANDF_RB5	IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
-  #define MX51_PAD_GPIO_3_15__NANDF_RB7	IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
-*/
-#define MX51_PAD_GPIO_3_14__NANDF_RB6	IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_16__NANDF_CS0	IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_17__NANDF_CS1	IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_18__NANDF_CS2	IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_19__NANDF_CS3	IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_20__NANDF_CS4	IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_21__NANDF_CS5	IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_22__NANDF_CS6	IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_23__NANDF_CS7	IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT	IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_25__NANDF_D15	IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_26__NANDF_D14	IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_27__NANDF_D13	IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_28__NANDF_D12	IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_29__NANDF_D11	IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_30__NANDF_D10	IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_31__NANDF_D9	IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_0__NANDF_D8	IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_1__NANDF_D7	IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_2__NANDF_D6	IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_3__NANDF_D5	IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_4__NANDF_D4	IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_5__NANDF_D3	IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_6__NANDF_D2	IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_7__NANDF_D1	IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_8__NANDF_D0	IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_12__CSI1_D8	IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_13__CSI1_D9	IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D10__CSI1_D10	IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D11__CSI1_D11	IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D12__CSI1_D12	IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D13__CSI1_D13	IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D14__CSI1_D14	IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D15__CSI1_D15	IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D16__CSI1_D16	IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D17__CSI1_D17	IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D18__CSI1_D18	IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D19__CSI1_D19	IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC	IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC	IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK	IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK	IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_PKE0__CSI1_PKE0	IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_9__CSI2_D12	IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_10__CSI2_D13	IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_11__CSI2_D14	IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_12__CSI2_D15	IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_11__CSI2_D16	IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_12__CSI2_D17	IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_11__CSI2_D18	IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_12__CSI2_D19	IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_13__CSI2_VSYNC	IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_14__CSI2_HSYNC	IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK	IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_PKE0__CSI2_PKE0	IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_16__I2C1_CLK	IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_17__I2C1_DAT	IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD	IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD	IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_20__AUD3_BB_CK	IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_21__AUD3_BB_FS	IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_22__CSPI1_MOSI	IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_23__CSPI1_MISO	IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_24__CSPI1_SS0	IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_25__CSPI1_SS1	IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_26__CSPI1_RDY	IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_4_27__CSPI1_SCLK	IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
-
-/* Babbage UART1 */
-#define MX51_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x618, 0x228,	IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
-#define MX51_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
-#define MX51_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL)
-
-/* Babbage UART2 */
-#define MX51_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL)
-
-#define MX51_PAD_GPIO_1_22__UART3_RXD	IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_23__UART3_TXD	IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_24__OWIRE_LINE	IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW0__KEY_ROW0	IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW1__KEY_ROW1	IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW2__KEY_ROW2	IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW3__KEY_ROW3	IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__KEY_COL0	IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__KEY_COL1	IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__KEY_COL2	IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL3__KEY_COL3	IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__KEY_COL4	IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__KEY_COL5	IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__USBH1_CLK	IOMUX_PAD(0x678, 0x278, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__USBH1_DIR	IOMUX_PAD(0x67C, 0x27C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__USBH1_STP	IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__GPIO_1_27	IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_GPIO, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__USBH1_NXT	IOMUX_PAD(0x684, 0x284, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0	IOMUX_PAD(0x688, 0x288, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1	IOMUX_PAD(0x68C, 0x28C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3	IOMUX_PAD(0x694, 0x294, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4	IOMUX_PAD(0x698, 0x298, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5	IOMUX_PAD(0x69C, 0x29C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6	IOMUX_PAD(0x6A0, 0x2A0, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7	IOMUX_PAD(0x6A4, 0x2A4, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_GPIO_3_0__DI1_PIN11	IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_1__DI1_PIN12	IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_2__DI1_PIN13	IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_3__DI1_D0_CS	IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_4__DI1_D1_CS	IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN	IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO	IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK	IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS	IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0	IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1	IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2	IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3	IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4	IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5	IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6	IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7	IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8	IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9	IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10	IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11	IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12	IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13	IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14	IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15	IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16	IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17	IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18	IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19	IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20	IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21	IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22	IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23	IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN3__DI1_PIN3	IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN2__DI1_PIN2	IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP1__DI_GP1	IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DI_GP2	IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__DI_GP3	IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__DI2_PIN4	IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__DI2_PIN2	IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN3__DI2_PIN3	IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DI_GP4	IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0	IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1	IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2	IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3	IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4	IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5	IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_19__DISP2_DAT6	IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_29__DISP2_DAT7	IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_30__DISP2_DAT8	IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_31__DISP2_DAT9	IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10	IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11	IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12	IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13	IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14	IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15	IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_0__GPIO1_0	IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_1__GPIO1_1	IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__SD2_CMD	IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__SD2_CLK	IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA0__SD2_DATA0	IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD2_DATA1	IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD2_DATA2	IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD2_DATA3	IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_2__GPIO1_2	IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_3__GPIO1_3	IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_4__GPIO1_4	IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_5__GPIO1_5	IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_6__GPIO1_6	IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_7__GPIO1_7	IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_8__GPIO1_8	IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \
-						(PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP |  PAD_CTL_HYS))
-#define MX51_PAD_GPIO_1_9__GPIO1_9	IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
-
-/* EIM */
-#define MX51_PAD_EIM_DA0__EIM_DA0	IOMUX_PAD(0x7a8, 0x01c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA1__EIM_DA1	IOMUX_PAD(0x7a8, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA2__EIM_DA2	IOMUX_PAD(0x7a8, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA3__EIM_DA3	IOMUX_PAD(0x7a8, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA4__EIM_DA4	IOMUX_PAD(0x7ac, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA5__EIM_DA5	IOMUX_PAD(0x7ac, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA6__EIM_DA6	IOMUX_PAD(0x7ac, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA7__EIM_DA7	IOMUX_PAD(0x7ac, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
-
-#define MX51_PAD_EIM_DA8__EIM_DA8	IOMUX_PAD(0x7b0, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA9__EIM_DA9	IOMUX_PAD(0x7b0, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA10__EIM_DA10	IOMUX_PAD(0x7b0, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA11__EIM_DA11	IOMUX_PAD(0x7b0, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA12__EIM_DA12	IOMUX_PAD(0x7bc, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA13__EIM_DA13	IOMUX_PAD(0x7bc, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA14__EIM_DA14	IOMUX_PAD(0x7bc, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA15__EIM_DA15	IOMUX_PAD(0x7bc, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+/*							  PAD    MUX   ALT INPSE PATH PADCTRL */
+#define MX51_PAD_EIM_DA0__EIM_DA0		IOMUX_PAD(0x7a8, 0x01c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA1__EIM_DA1		IOMUX_PAD(0x7a8, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA2__EIM_DA2		IOMUX_PAD(0x7a8, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA3__EIM_DA3		IOMUX_PAD(0x7a8, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA4__EIM_DA4		IOMUX_PAD(0x7ac, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA5__EIM_DA5		IOMUX_PAD(0x7ac, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA6__EIM_DA6		IOMUX_PAD(0x7ac, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA7__EIM_DA7		IOMUX_PAD(0x7ac, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA8__EIM_DA8		IOMUX_PAD(0x7b0, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA9__EIM_DA9		IOMUX_PAD(0x7b0, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA10__EIM_DA10		IOMUX_PAD(0x7b0, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA11__EIM_DA11		IOMUX_PAD(0x7b0, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA12__EIM_DA12		IOMUX_PAD(0x7bc, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA13__EIM_DA13		IOMUX_PAD(0x7bc, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA14__EIM_DA14		IOMUX_PAD(0x7bc, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA15__EIM_DA15		IOMUX_PAD(0x7bc, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__GPIO_2_0              IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__I2C1_SDA		IOMUX_PAD(0x3f0, 0x05c, (4 | IOMUX_CONFIG_SION), \
+							0x09b4, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D17__GPIO_2_1              IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D18__GPIO_2_2              IOMUX_PAD(0x3f8, 0x064, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__GPIO_2_3              IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__I2C1_SCL		IOMUX_PAD(0x3fc, 0x068, (4 | IOMUX_CONFIG_SION), \
+							0x09b0, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D20__GPIO_2_4              IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__GPIO_2_5		IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D22__GPIO_2_6              IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__GPIO_2_7              IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D24__UART3_CTS             IOMUX_PAD(0x410, 0x07c, 3, 0x0,   0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART3_RXD             IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART2_CTS		IOMUX_PAD(0x414, 0x080, 4, 0x0,   0, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART3_TXD             IOMUX_PAD(0x418, 0x084, 3, 0x0,   0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART2_RTS		IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_EIM_D27__UART3_RTS             IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D28__EIM_D28               IOMUX_PAD(0x420, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__EIM_D29               IOMUX_PAD(0x424, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__EIM_D30               IOMUX_PAD(0x428, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__EIM_D31               IOMUX_PAD(0x42c, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A16__GPIO_2_10             IOMUX_PAD(0x430, 0x09c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A17__GPIO_2_11             IOMUX_PAD(0x434, 0x0a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A18__GPIO_2_12             IOMUX_PAD(0x438, 0x0a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A19__GPIO_2_13             IOMUX_PAD(0x43c, 0x0a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A20__GPIO_2_14             IOMUX_PAD(0x440, 0x0ac, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A21__GPIO_2_15             IOMUX_PAD(0x444, 0x0b0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A22__GPIO_2_16             IOMUX_PAD(0x448, 0x0b4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A23__GPIO_2_17             IOMUX_PAD(0x44c, 0x0b8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A24__GPIO_2_18             IOMUX_PAD(0x450, 0x0bc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A25__GPIO_2_19             IOMUX_PAD(0x454, 0x0c0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__GPIO_2_20             IOMUX_PAD(0x458, 0x0c4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__GPIO_2_21             IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB0__EIM_EB0               IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB1__EIM_EB1               IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__GPIO_2_22             IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__FEC_MDIO		IOMUX_PAD(0x468, 0x0d4, 3, 0x0,   0, MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
+#define MX51_PAD_EIM_EB3__GPIO_2_23             IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__FEC_RDAT1		IOMUX_PAD(0x46c, 0x0d8, 3, 0x0,   0, MX51_PAD_CTRL_2)
+#define MX51_PAD_EIM_OE__GPIO_2_24              IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS0__GPIO_2_25             IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS1__GPIO_2_26             IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__GPIO_2_27             IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__FEC_RDAT2		IOMUX_PAD(0x47c, 0x0e8, 3, 0x0,   0, MX51_PAD_CTRL_2)
+#define MX51_PAD_EIM_CS3__GPIO_2_28             IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__FEC_RDAT3		IOMUX_PAD(0x480, 0x0ec, 3, 0x0,   0, MX51_PAD_CTRL_2)
+#define MX51_PAD_EIM_CS4__GPIO_2_29             IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__FEC_RX_ER		IOMUX_PAD(0x484, 0x0f0, 3, 0x0,   0, MX51_PAD_CTRL_2)
+#define MX51_PAD_EIM_CS5__GPIO_2_30             IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__FEC_CRS		IOMUX_PAD(0x488, 0x0f4, 3, 0x0,   0, MX51_PAD_CTRL_2)
+#define MX51_PAD_EIM_DTACK__GPIO_2_31           IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_LBA__GPIO_3_1              IOMUX_PAD(0x494, 0x0FC, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CRE__GPIO_3_2              IOMUX_PAD(0x4A0, 0x100, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__DRAM_CS1             IOMUX_PAD(0x4D0, 0x104, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WE_B__GPIO_3_3           IOMUX_PAD(0x4E4, 0x108, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RE_B__GPIO_3_4           IOMUX_PAD(0x4E8, 0x10C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_ALE__GPIO_3_5            IOMUX_PAD(0x4EC, 0x110, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CLE__GPIO_3_6            IOMUX_PAD(0x4F0, 0x114, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WP_B__GPIO_3_7           IOMUX_PAD(0x4F4, 0x118, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__GPIO_3_8            IOMUX_PAD(0x4F8, 0x11C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__GPIO_3_9            IOMUX_PAD(0x4FC, 0x120, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__GPIO_3_10           IOMUX_PAD(0x500, 0x124, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK         IOMUX_PAD(0x500, 0x124, 2, 0x0,   0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__FEC_COL		IOMUX_PAD(0x500, 0x124, 1, 0x0,   0, MX51_PAD_CTRL_2)
+#define MX51_PAD_NANDF_RB3__GPIO_3_11           IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__ECSPI2_MISO         IOMUX_PAD(0x504, 0x128, 2, 0x0,   0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__FEC_RXCLK		IOMUX_PAD(0x504, 0x128, 1, 0x0,   0, MX51_PAD_CTRL_2)
+#define MX51_PAD_NANDF_RB6__FEC_RDAT0		IOMUX_PAD(0x5DC, 0x134, 1, 0x0,   0, MX51_PAD_CTRL_4)
+#define MX51_PAD_NANDF_RB7__FEC_TDAT0		IOMUX_PAD(0x5E0, 0x138, 1, 0x0,   0, MX51_PAD_CTRL_5)
+#define MX51_PAD_GPIO_NAND__GPIO_3_12           IOMUX_PAD(0x514, 0x12C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS0__GPIO_3_16           IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS1__GPIO_3_17           IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__GPIO_3_18           IOMUX_PAD(0x520, 0x138, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__FEC_TX_ER		IOMUX_PAD(0x520, 0x138, 2, 0x0,   0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS3__GPIO_3_19           IOMUX_PAD(0x524, 0x13C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__FEC_MDC		IOMUX_PAD(0x524, 0x13C, 2, 0x0,   0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS4__GPIO_3_20           IOMUX_PAD(0x528, 0x140, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__FEC_TDAT1		IOMUX_PAD(0x528, 0x140, 2, 0x0,   0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS5__GPIO_3_21           IOMUX_PAD(0x52C, 0x144, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__FEC_TDAT2		IOMUX_PAD(0x52C, 0x144, 2, 0x0,   0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS6__GPIO_3_22           IOMUX_PAD(0x530, 0x148, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__FEC_TDAT3		IOMUX_PAD(0x530, 0x148, 2, 0x0,   0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS7__GPIO_3_23           IOMUX_PAD(0x534, 0x14C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__FEC_TX_EN		IOMUX_PAD(0x534, 0x14C, 1, 0x0,   0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_RDY_INT__GPIO_3_24       IOMUX_PAD(0x538, 0x150, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	IOMUX_PAD(0x538, 0x150, 1, 0x0,   0, MX51_PAD_CTRL_4)
+#define MX51_PAD_NANDF_D15__GPIO_3_25           IOMUX_PAD(0x53C, 0x154, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__ECSPI2_MOSI         IOMUX_PAD(0x53C, 0x154, 2, 0x0,   0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__GPIO_3_26           IOMUX_PAD(0x540, 0x158, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__GPIO_3_27           IOMUX_PAD(0x544, 0x15C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__GPIO_3_28           IOMUX_PAD(0x548, 0x160, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__GPIO_3_29           IOMUX_PAD(0x54C, 0x164, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D10__GPIO_3_30           IOMUX_PAD(0x550, 0x168, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__GPIO_3_31            IOMUX_PAD(0x554, 0x16C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__GPIO_4_0             IOMUX_PAD(0x558, 0x170, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D7__GPIO_4_1             IOMUX_PAD(0x55C, 0x174, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__GPIO_4_2             IOMUX_PAD(0x560, 0x178, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__GPIO_4_3             IOMUX_PAD(0x564, 0x17C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__GPIO_4_4             IOMUX_PAD(0x568, 0x180, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__GPIO_4_5             IOMUX_PAD(0x56C, 0x184, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__GPIO_4_6             IOMUX_PAD(0x570, 0x188, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__GPIO_4_7             IOMUX_PAD(0x574, 0x18C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__GPIO_4_8             IOMUX_PAD(0x578, 0x190, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D8__GPIO_3_12             IOMUX_PAD(0x57C, 0x194, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D9__GPIO_3_13             IOMUX_PAD(0x580, 0x198, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D10__CSI1_D10             IOMUX_PAD(0x584, 0x19C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D11__CSI1_D11             IOMUX_PAD(0x588, 0x1A0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D12__CSI1_D12             IOMUX_PAD(0x58C, 0x1A4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D13__CSI1_D13             IOMUX_PAD(0x590, 0x1A8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D14__CSI1_D14             IOMUX_PAD(0x594, 0x1AC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D15__CSI1_D15             IOMUX_PAD(0x598, 0x1B0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D16__CSI1_D16             IOMUX_PAD(0x59C, 0x1B4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D17__CSI1_D17             IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D18__CSI1_D18             IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D19__CSI1_D19             IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC         IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC         IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK       IOMUX_PAD(0x5B4, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK           IOMUX_PAD(0x5B8, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PKE0__CSI1_PKE0           IOMUX_PAD(0x860, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D12__GPIO_4_9             IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D13__GPIO_4_10            IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D14__GPIO_4_11            IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D15__GPIO_4_12            IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D16__GPIO_4_11            IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D17__GPIO_4_12            IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D18__GPIO_4_11            IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D19__GPIO_4_12            IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_VSYNC__GPIO_4_13          IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_HSYNC__GPIO_4_14          IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_PIXCLK__GPIO_4_15         IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_CLK__GPIO_4_16            IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_CLK__HSI2C_CLK		IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_DAT__GPIO_4_17            IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_I2C1_DAT__HSI2C_DAT		IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD       IOMUX_PAD(0x5F0, 0x200, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_TXD__GPIO_4_18         IOMUX_PAD(0x5F0, 0x200, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD       IOMUX_PAD(0x5F4, 0x204, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__GPIO_4_19         IOMUX_PAD(0x5F4, 0x204, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK         IOMUX_PAD(0x5F8, 0x208, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_CK__GPIO_4_20          IOMUX_PAD(0x5F8, 0x208, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS         IOMUX_PAD(0x5FC, 0x20C, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__GPIO_4_21          IOMUX_PAD(0x5FC, 0x20C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI        IOMUX_PAD(0x600, 0x210, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__GPIO_4_22          IOMUX_PAD(0x600, 0x210, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO        IOMUX_PAD(0x604, 0x214, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__GPIO_4_23          IOMUX_PAD(0x604, 0x214, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0          IOMUX_PAD(0x608, 0x218, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__GPIO_4_24           IOMUX_PAD(0x608, 0x218, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1          IOMUX_PAD(0x60C, 0x21C, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__GPIO_4_25           IOMUX_PAD(0x60C, 0x21C, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY          IOMUX_PAD(0x610, 0x220, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__GPIO_4_26           IOMUX_PAD(0x610, 0x220, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK        IOMUX_PAD(0x614, 0x224, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__GPIO_4_27          IOMUX_PAD(0x614, 0x224, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_UART1_RXD__UART1_RXD           IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_TXD__UART1_TXD           IOMUX_PAD(0x61C, 0x22C, 0, 0x0,   0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_RTS__UART1_RTS           IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__UART1_CTS           IOMUX_PAD(0x624, 0x234, 0, 0x0,   0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART2_RXD__UART2_RXD           IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__UART2_TXD           IOMUX_PAD(0x62C, 0x23C, 0, 0x0,   0, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__UART3_RXD		IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__GPIO_1_22           IOMUX_PAD(0x630, 0x240, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__UART3_TXD		IOMUX_PAD(0x634, 0x244, 1, 0x0,   0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__GPIO_1_23           IOMUX_PAD(0x634, 0x244, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_OWIRE_LINE__GPIO_1_24          IOMUX_PAD(0x638, 0x248, 3, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW0__KEY_ROW0             IOMUX_PAD(0x63C, 0x24C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW1__KEY_ROW1             IOMUX_PAD(0x640, 0x250, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW2__KEY_ROW2             IOMUX_PAD(0x644, 0x254, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW3__KEY_ROW3             IOMUX_PAD(0x648, 0x258, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__KEY_COL0             IOMUX_PAD(0x64C, 0x25C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__KEY_COL1             IOMUX_PAD(0x650, 0x260, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__KEY_COL2             IOMUX_PAD(0x654, 0x264, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL3__KEY_COL3             IOMUX_PAD(0x658, 0x268, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__KEY_COL4             IOMUX_PAD(0x65C, 0x26C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__UART3_RTS		IOMUX_PAD(0x65C, 0x26C, 2, 0x9f0, 4, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__I2C2_SCL		IOMUX_PAD(0x65C, 0x26C, (3 | IOMUX_CONFIG_SION), \
+							0x09b8, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__KEY_COL5             IOMUX_PAD(0x660, 0x270, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__UART3_CTS		IOMUX_PAD(0x660, 0x270, 2, 0,     0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__I2C2_SDA		IOMUX_PAD(0x660, 0x270, (3 | IOMUX_CONFIG_SION), \
+							0x09bc, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__USBH1_CLK           IOMUX_PAD(0x678, 0x278, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__USBH1_DIR           IOMUX_PAD(0x67C, 0x27C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__USBH1_STP           IOMUX_PAD(0x680, 0x280, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__GPIO_1_27           IOMUX_PAD(0x680, 0x280, 2, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__USBH1_NXT           IOMUX_PAD(0x684, 0x284, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0       IOMUX_PAD(0x688, 0x288, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1       IOMUX_PAD(0x68C, 0x28C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2       IOMUX_PAD(0x690, 0x290, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3       IOMUX_PAD(0x694, 0x294, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4       IOMUX_PAD(0x698, 0x298, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5       IOMUX_PAD(0x69C, 0x29C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6       IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7       IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_DI1_PIN11__GPIO_3_0            IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN12__GPIO_3_1            IOMUX_PAD(0x6AC, 0x2AC, 4, 0x978, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN13__GPIO_3_2            IOMUX_PAD(0x6B0, 0x2B0, 4, 0x97c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D0_CS__GPIO_3_3            IOMUX_PAD(0x6B4, 0x2B4, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__GPIO_3_4            IOMUX_PAD(0x6B8, 0x2B8, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5       IOMUX_PAD(0x6BC, 0x2BC, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6       IOMUX_PAD(0x6C0, 0x2C0, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7       IOMUX_PAD(0x6C4, 0x2C4, 4, 0x990, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8        IOMUX_PAD(0x6C8, 0x2C8, 4, 0x994, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0         IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1         IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2         IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3         IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4         IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5         IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6         IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7         IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8         IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9         IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10       IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11       IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12       IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13       IOMUX_PAD(0x700, 0x300, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14       IOMUX_PAD(0x704, 0x304, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15       IOMUX_PAD(0x708, 0x308, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16       IOMUX_PAD(0x70C, 0x30C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17       IOMUX_PAD(0x710, 0x310, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18       IOMUX_PAD(0x714, 0x314, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19       IOMUX_PAD(0x718, 0x318, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20       IOMUX_PAD(0x71C, 0x31C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21       IOMUX_PAD(0x720, 0x320, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22       IOMUX_PAD(0x724, 0x324, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23       IOMUX_PAD(0x728, 0x328, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN3__DI1_PIN3             IOMUX_PAD(0x72C, 0x32C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN2__DI1_PIN2             IOMUX_PAD(0x734, 0x330, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP1__DI_GP1                 IOMUX_PAD(0x73C, 0x334, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DI_GP2                 IOMUX_PAD(0x740, 0x338, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__DI_GP3                 IOMUX_PAD(0x744, 0x33C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__DI2_PIN4             IOMUX_PAD(0x748, 0x340, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__DI2_PIN2             IOMUX_PAD(0x74C, 0x344, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN3__DI2_PIN3             IOMUX_PAD(0x750, 0x348, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK     IOMUX_PAD(0x754, 0x34C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DI_GP4                 IOMUX_PAD(0x758, 0x350, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0         IOMUX_PAD(0x75C, 0x354, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1         IOMUX_PAD(0x760, 0x358, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2         IOMUX_PAD(0x764, 0x35C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3         IOMUX_PAD(0x768, 0x360, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4         IOMUX_PAD(0x76C, 0x364, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5         IOMUX_PAD(0x770, 0x368, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__GPIO_1_19          IOMUX_PAD(0x774, 0x36C, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__GPIO_1_29          IOMUX_PAD(0x778, 0x370, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__GPIO_1_30          IOMUX_PAD(0x77C, 0x374, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__GPIO_1_31          IOMUX_PAD(0x780, 0x378, 5, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10       IOMUX_PAD(0x784, 0x37C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11       IOMUX_PAD(0x788, 0x380, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12       IOMUX_PAD(0x78C, 0x384, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13       IOMUX_PAD(0x790, 0x388, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14       IOMUX_PAD(0x794, 0x38C, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15       IOMUX_PAD(0x798, 0x390, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD		IOMUX_PAD(0x79C, 0x394, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__AUD5_RXFS             IOMUX_PAD(0x79C, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK		IOMUX_PAD(0x7A0, 0x398, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_SD1_CLK__AUD5_RXC              IOMUX_PAD(0x7A0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0		IOMUX_PAD(0x7A4, 0x39C, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__AUD5_TXD            IOMUX_PAD(0x7A4, 0x39C, 1, 0x8d8, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1		IOMUX_PAD(0x7A8, 0x3A0, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__AUD5_RXD            IOMUX_PAD(0x7A8, 0x3A0, 1, 0x8d4, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2		IOMUX_PAD(0x7AC, 0x3A4, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__AUD5_TXC            IOMUX_PAD(0x7AC, 0x3A4, 1, 0x8e4, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3		IOMUX_PAD(0x7B0, 0x3A8, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__AUD5_TXFS           IOMUX_PAD(0x7B0, 0x3A8, 1, 0x8e8, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD		IOMUX_PAD(0x7BC, 0x3B4, IOMUX_CONFIG_SION, 0x0, 1, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK		IOMUX_PAD(0x7C0, 0x3B8, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0		IOMUX_PAD(0x7C4, 0x3BC, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1		IOMUX_PAD(0x7C8, 0x3C0, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2		IOMUX_PAD(0x7CC, 0x3C4, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3		IOMUX_PAD(0x7D0, 0x3C8, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_GPIO_1_0__GPIO_1_0		IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_1__GPIO_1_1		IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__GPIO_1_2		IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__I2C2_SCL		IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \
+							0x9b8,   3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__GPIO_1_3		IOMUX_PAD(0x7D8, 0x3D0, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__I2C2_SDA		IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \
+							0x9bc,   3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_4__GPIO_1_4		IOMUX_PAD(0x804, 0x3D8, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_5__GPIO_1_5		IOMUX_PAD(0x808, 0x3DC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_6__GPIO_1_6		IOMUX_PAD(0x80C, 0x3E0, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO_1_7		IOMUX_PAD(0x810, 0x3E4, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_8__GPIO_1_8		IOMUX_PAD(0x814, 0x3E8, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_9__GPIO_1_9		IOMUX_PAD(0x818, 0x3EC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
 
 #endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 3887f3fe29d4..15d59510f597 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __MACH_IOMUX_MXC91231_H__
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index f2f73d31d5ba..0880a4a1aed1 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -89,6 +89,21 @@ struct pad_desc {
 #define PAD_CTL_SRE_FAST		(1 << 0)
 #define PAD_CTL_SRE_SLOW		(0 << 0)
 
+
+#define MX51_NUM_GPIO_PORT	4
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA	(0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB	(1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC	(2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD	(3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE	(4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF	(5 << GPIO_PORT_SHIFT)
+
 /*
  * setups a single pad in the iomuxer
  */
diff --git a/arch/arm/plat-mxc/include/mach/iram.h b/arch/arm/plat-mxc/include/mach/iram.h
new file mode 100644
index 000000000000..022690c33702
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iram.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+
+#ifdef CONFIG_IRAM_ALLOC
+
+int __init iram_init(unsigned long base, unsigned long size);
+void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr);
+void iram_free(unsigned long dma_addr, unsigned int size);
+
+#else
+
+static inline int __init iram_init(unsigned long base, unsigned long size)
+{
+	return -ENOMEM;
+}
+
+static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
+{
+	return NULL;
+}
+
+static inline void iram_free(unsigned long base, unsigned long size) {}
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index c4b40c35a6a1..564ec9dbc93d 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -44,12 +44,12 @@
  */
 #define CONSISTENT_DMA_SIZE SZ_8M
 
-#elif defined(CONFIG_MX1_VIDEO)
+#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT)
 /*
  * Increase size of DMA-consistent memory region.
  * This is required for i.MX camera driver to capture at least four VGA frames.
  */
 #define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO */
+#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */
 
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h
index de2128dada5c..29115f405af9 100644
--- a/arch/arm/plat-mxc/include/mach/mmc.h
+++ b/arch/arm/plat-mxc/include/mach/mmc.h
@@ -31,6 +31,9 @@ struct imxmmc_platform_data {
 
 	/* adjust slot voltage */
 	void (*setpower)(struct device *, unsigned int vdd);
+
+	/* enable card detect using DAT3 */
+	int dat3_card_detect;
 };
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 5eba7e6785de..641b24618239 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -91,24 +91,24 @@
 #define MX1_SIM_DATA_INT	16
 #define MX1_RTC_INT		17
 #define MX1_RTC_SAMINT		18
-#define MX1_UART2_MINT_PFERR	19
-#define MX1_UART2_MINT_RTS	20
-#define MX1_UART2_MINT_DTR	21
-#define MX1_UART2_MINT_UARTC	22
-#define MX1_UART2_MINT_TX	23
-#define MX1_UART2_MINT_RX	24
-#define MX1_UART1_MINT_PFERR	25
-#define MX1_UART1_MINT_RTS	26
-#define MX1_UART1_MINT_DTR	27
-#define MX1_UART1_MINT_UARTC	28
-#define MX1_UART1_MINT_TX	29
-#define MX1_UART1_MINT_RX	30
+#define MX1_INT_UART2PFERR	19
+#define MX1_INT_UART2RTS	20
+#define MX1_INT_UART2DTR	21
+#define MX1_INT_UART2UARTC	22
+#define MX1_INT_UART2TX		23
+#define MX1_INT_UART2RX		24
+#define MX1_INT_UART1PFERR	25
+#define MX1_INT_UART1RTS	26
+#define MX1_INT_UART1DTR	27
+#define MX1_INT_UART1UARTC	28
+#define MX1_INT_UART1TX		29
+#define MX1_INT_UART1RX		30
 #define MX1_VOICE_DAC_INT	31
 #define MX1_VOICE_ADC_INT	32
 #define MX1_PEN_DATA_INT	33
 #define MX1_PWM_INT		34
 #define MX1_SDHC_INT		35
-#define MX1_I2C_INT		39
+#define MX1_INT_I2C		39
 #define MX1_CSPI_INT		41
 #define MX1_SSI_TX_INT		42
 #define MX1_SSI_TX_ERR_INT	43
@@ -245,7 +245,7 @@
 #define PEN_DATA_INT MX1_PEN_DATA_INT
 #define PWM_INT MX1_PWM_INT
 #define SDHC_INT MX1_SDHC_INT
-#define I2C_INT MX1_I2C_INT
+#define I2C_INT MX1_INT_I2C
 #define CSPI_INT MX1_CSPI_INT
 #define SSI_TX_INT MX1_SSI_TX_INT
 #define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index ed98b9c9f389..8bc59720b6e4 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -120,7 +120,7 @@
 #define MX21_INT_GPT1		26
 #define MX21_INT_WDOG		27
 #define MX21_INT_PCMCIA		28
-#define MX21_INT_NANDFC		29
+#define MX21_INT_NFC		29
 #define MX21_INT_BMI		30
 #define MX21_INT_CSI		31
 #define MX21_INT_DMACH0		32
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 4eb6e334bda5..cf46a45b0d4e 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -11,6 +11,12 @@
 #define MX25_AVIC_BASE_ADDR_VIRT	0xfc400000
 #define MX25_AVIC_SIZE			SZ_1M
 
+#define MX25_I2C1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x80000)
+#define MX25_I2C3_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x84000)
+#define MX25_CAN1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x88000)
+#define MX25_CAN2_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x8c000)
+#define MX25_I2C2_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x98000)
+#define MX25_CSPI1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xa4000)
 #define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
 
 #define MX25_CRM_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x80000)
@@ -27,22 +33,63 @@
 	IMX_IO_ADDRESS(x, MX25_AIPS2) ?:			\
 	IMX_IO_ADDRESS(x, MX25_AVIC))
 
+#define MX25_AIPS1_IO_ADDRESS(x) \
+	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+
 #define MX25_UART1_BASE_ADDR		0x43f90000
 #define MX25_UART2_BASE_ADDR		0x43f94000
+#define MX25_AUDMUX_BASE_ADDR		0x43fb0000
+#define MX25_UART3_BASE_ADDR		0x5000c000
+#define MX25_UART4_BASE_ADDR		0x50008000
+#define MX25_UART5_BASE_ADDR		0x5002c000
 
+#define MX25_CSPI3_BASE_ADDR		0x50004000
+#define MX25_CSPI2_BASE_ADDR		0x50010000
 #define MX25_FEC_BASE_ADDR		0x50038000
+#define MX25_SSI2_BASE_ADDR		0x50014000
+#define MX25_SSI1_BASE_ADDR		0x50034000
 #define MX25_NFC_BASE_ADDR		0xbb000000
 #define MX25_DRYICE_BASE_ADDR		0x53ffc000
+#define MX25_ESDHC1_BASE_ADDR		0x53fb4000
+#define MX25_ESDHC2_BASE_ADDR		0x53fb8000
 #define MX25_LCDC_BASE_ADDR		0x53fbc000
+#define MX25_KPP_BASE_ADDR		0x43fa8000
+#define MX25_SDMA_BASE_ADDR		0x53fd4000
+#define MX25_OTG_BASE_ADDR		0x53ff4000
+#define MX25_CSI_BASE_ADDR		0x53ff8000
 
-#define MX25_INT_DRYICE	25
-#define MX25_INT_FEC	57
-#define MX25_INT_NANDFC	33
-#define MX25_INT_LCDC	39
+#define MX25_INT_CSPI3		0
+#define MX25_INT_I2C1		3
+#define MX25_INT_I2C2		4
+#define MX25_INT_UART4		5
+#define MX25_INT_ESDHC2		8
+#define MX25_INT_ESDHC1		9
+#define MX25_INT_I2C3		10
+#define MX25_INT_SSI2		11
+#define MX25_INT_SSI1		12
+#define MX25_INT_CSPI2		13
+#define MX25_INT_CSPI1		14
+#define MX25_INT_CSI		17
+#define MX25_INT_UART3		18
+#define MX25_INT_KPP		24
+#define MX25_INT_DRYICE		25
+#define MX25_INT_UART2		32
+#define MX25_INT_NFC		33
+#define MX25_INT_SDMA		34
+#define MX25_INT_LCDC		39
+#define MX25_INT_UART5		40
+#define MX25_INT_CAN1		43
+#define MX25_INT_CAN2		44
+#define MX25_INT_UART1		45
+#define MX25_INT_FEC		57
 
-#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
-#define UART1_BASE_ADDR			MX25_UART1_BASE_ADDR
-#define UART2_BASE_ADDR			MX25_UART2_BASE_ADDR
-#endif
+#define MX25_DMA_REQ_SSI2_RX1	22
+#define MX25_DMA_REQ_SSI2_TX1	23
+#define MX25_DMA_REQ_SSI2_RX0	24
+#define MX25_DMA_REQ_SSI2_TX0	25
+#define MX25_DMA_REQ_SSI1_RX1	26
+#define MX25_DMA_REQ_SSI1_TX1	27
+#define MX25_DMA_REQ_SSI1_RX0	28
+#define MX25_DMA_REQ_SSI1_TX0	29
 
 #endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index bae9cd75beee..2237ba2e5351 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -48,7 +48,7 @@
 #define MX27_CSPI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0f000)
 #define MX27_SSI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x10000)
 #define MX27_SSI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x11000)
-#define MX27_I2C_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x12000)
+#define MX27_I2C1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x12000)
 #define MX27_SDHC1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x13000)
 #define MX27_SDHC2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x14000)
 #define MX27_GPIO_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x15000)
@@ -150,7 +150,7 @@ static inline void mx27_setup_weimcs(size_t cs,
 #define MX27_INT_SDHC3		9
 #define MX27_INT_SDHC2		10
 #define MX27_INT_SDHC1		11
-#define MX27_INT_I2C		12
+#define MX27_INT_I2C1		12
 #define MX27_INT_SSI2		13
 #define MX27_INT_SSI1		14
 #define MX27_INT_CSPI2		15
@@ -167,7 +167,7 @@ static inline void mx27_setup_weimcs(size_t cs,
 #define MX27_INT_GPT1		26
 #define MX27_INT_WDOG		27
 #define MX27_INT_PCMCIA		28
-#define MX27_INT_NANDFC		29
+#define MX27_INT_NFC		29
 #define MX27_INT_ATA		30
 #define MX27_INT_CSI		31
 #define MX27_INT_DMACH0		32
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
new file mode 100644
index 000000000000..3c080a32dbf5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h
@@ -0,0 +1,46 @@
+/*
+ * mx2-cam.h - i.MX27/i.MX25 camera driver header file
+ *
+ * Copyright (C) 2003, Intel Corporation
+ * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX2_CAM_H_
+#define __MACH_MX2_CAM_H_
+
+#define MX2_CAMERA_SWAP16		(1 << 0)
+#define MX2_CAMERA_EXT_VSYNC		(1 << 1)
+#define MX2_CAMERA_CCIR			(1 << 2)
+#define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
+#define MX2_CAMERA_HSYNC_HIGH		(1 << 4)
+#define MX2_CAMERA_GATED_CLOCK		(1 << 5)
+#define MX2_CAMERA_INV_DATA		(1 << 6)
+#define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
+#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
+
+/**
+ * struct mx2_camera_platform_data - optional platform data for mx2_camera
+ * @flags: any combination of MX2_CAMERA_*
+ * @clk: clock rate of the csi block / 2
+ */
+struct mx2_camera_platform_data {
+	unsigned long flags;
+	unsigned long clk;
+};
+
+#endif /* __MACH_MX2_CAM_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index fb90e119c2b5..61cfe827498b 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -23,7 +23,7 @@
 #define MX31_ETB_SLOT4_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x10000)
 #define MX31_ETB_SLOT5_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x14000)
 #define MX31_ECT_CTIO_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x18000)
-#define MX31_I2C_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
+#define MX31_I2C1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
 #define MX31_I2C3_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x84000)
 #define MX31_OTG_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x88000)
 #define MX31_ATA_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x8c000)
@@ -145,7 +145,7 @@ static inline void mx31_setup_weimcs(size_t cs,
 #define MX31_INT_FIRI		7
 #define MX31_INT_MMC_SDHC2	8
 #define MX31_INT_MMC_SDHC1	9
-#define MX31_INT_I2C		10
+#define MX31_INT_I2C1		10
 #define MX31_INT_SSI2		11
 #define MX31_INT_SSI1		12
 #define MX31_INT_CSPI2		13
@@ -168,7 +168,7 @@ static inline void mx31_setup_weimcs(size_t cs,
 #define MX31_INT_POWER_FAIL	30
 #define MX31_INT_CCM_DVFS	31
 #define MX31_INT_UART2		32
-#define MX31_INT_NANDFC		33
+#define MX31_INT_NFC		33
 #define MX31_INT_SDMA		34
 #define MX31_INT_USB1		35
 #define MX31_INT_USB2		36
@@ -197,6 +197,15 @@ static inline void mx31_setup_weimcs(size_t cs,
 #define MX31_INT_EXT_WDOG	62
 #define MX31_INT_EXT_TV		63
 
+#define MX31_DMA_REQ_SSI2_RX1	22
+#define MX31_DMA_REQ_SSI2_TX1	23
+#define MX31_DMA_REQ_SSI2_RX0	24
+#define MX31_DMA_REQ_SSI2_TX0	25
+#define MX31_DMA_REQ_SSI1_RX1	26
+#define MX31_DMA_REQ_SSI1_TX1	27
+#define MX31_DMA_REQ_SSI1_RX0	28
+#define MX31_DMA_REQ_SSI1_TX0	29
+
 #define MX31_PROD_SIGNATURE		0x1	/* For MX31 */
 
 /* silicon revisions specific to i.MX31 */
@@ -231,7 +240,6 @@ static inline void mx31_setup_weimcs(size_t cs,
 #define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR
 #define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER
 #define MXC_INT_FIRI MX31_INT_FIRI
-#define MXC_INT_MMC_SDHC1 MX31_INT_MMC_SDHC1
 #define MXC_INT_MBX MX31_INT_MBX
 #define MXC_INT_CSPI3 MX31_INT_CSPI3
 #define MXC_INT_SIM2 MX31_INT_SIM2
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 526a55842ae5..6267cff6035d 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -1,5 +1,6 @@
 #ifndef __MACH_MX35_H__
 #define __MACH_MX35_H__
+
 /*
  * IRAM
  */
@@ -18,7 +19,7 @@
 #define MX35_ETB_SLOT4_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x10000)
 #define MX35_ETB_SLOT5_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x14000)
 #define MX35_ECT_CTIO_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x18000)
-#define MX35_I2C_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x80000)
 #define MX35_I2C3_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x84000)
 #define MX35_UART1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x90000)
 #define MX35_UART2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x94000)
@@ -52,6 +53,9 @@
 #define MX35_GPIO3_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xa4000)
 #define MX35_SCC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xac000)
 #define MX35_RNGA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb0000)
+#define MX35_ESDHC1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb4000)
+#define MX35_ESDHC2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb8000)
+#define MX35_ESDHC3_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xbc000)
 #define MX35_IPU_CTRL_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc0000)
 #define MX35_AUDMUX_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc4000)
 #define MX35_GPIO1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xcc000)
@@ -60,7 +64,11 @@
 #define MX35_RTC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd8000)
 #define MX35_WDOG_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xdc000)
 #define MX35_PWM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe0000)
+#define MX35_CAN1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe4000)
+#define MX35_CAN2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe8000)
 #define MX35_RTIC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xec000)
+#define MX35_IIM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xf0000)
+
 #define MX35_OTG_BASE_ADDR		0x53ff4000
 
 #define MX35_ROMP_BASE_ADDR		0x60000000
@@ -120,10 +128,10 @@
 #define MX35_INT_I2C3		3
 #define MX35_INT_I2C2		4
 #define MX35_INT_RTIC		6
-#define MX35_INT_MMC_SDHC1	7
-#define MX35_INT_MMC_SDHC2	8
-#define MX35_INT_MMC_SDHC3	9
-#define MX35_INT_I2C		10
+#define MX35_INT_ESDHC1		7
+#define MX35_INT_ESDHC2		8
+#define MX35_INT_ESDHC3		9
+#define MX35_INT_I2C1		10
 #define MX35_INT_SSI1		11
 #define MX35_INT_SSI2		12
 #define MX35_INT_CSPI2		13
@@ -143,7 +151,7 @@
 #define MX35_INT_GPT		29
 #define MX35_INT_POWER_FAIL	30
 #define MX35_INT_UART2		32
-#define MX35_INT_NANDFC		33
+#define MX35_INT_NFC		33
 #define MX35_INT_SDMA		34
 #define MX35_INT_USBHS		35
 #define MX35_INT_USBOTG		37
@@ -171,30 +179,24 @@
 #define MX35_INT_EXT_WDOG	62
 #define MX35_INT_EXT_TV		63
 
+#define MX35_DMA_REQ_SSI2_RX1   22
+#define MX35_DMA_REQ_SSI2_TX1   23
+#define MX35_DMA_REQ_SSI2_RX0   24
+#define MX35_DMA_REQ_SSI2_TX0   25
+#define MX35_DMA_REQ_SSI1_RX1   26
+#define MX35_DMA_REQ_SSI1_TX1   27
+#define MX35_DMA_REQ_SSI1_RX0   28
+#define MX35_DMA_REQ_SSI1_TX0   29
+
 #define MX35_PROD_SIGNATURE		0x1	/* For MX31 */
 
-/* silicon revisions specific to i.MX31 */
-#define MX35_CHIP_REV_1_0		0x10
-#define MX35_CHIP_REV_1_1		0x11
-#define MX35_CHIP_REV_1_2		0x12
-#define MX35_CHIP_REV_1_3		0x13
-#define MX35_CHIP_REV_2_0		0x20
-#define MX35_CHIP_REV_2_1		0x21
-#define MX35_CHIP_REV_2_2		0x22
-#define MX35_CHIP_REV_2_3		0x23
-#define MX35_CHIP_REV_3_0		0x30
-#define MX35_CHIP_REV_3_1		0x31
-#define MX35_CHIP_REV_3_2		0x32
-
-#define MX35_SYSTEM_REV_MIN		MX35_CHIP_REV_1_0
+#define MX35_SYSTEM_REV_MIN		MX3x_CHIP_REV_1_0
 #define MX35_SYSTEM_REV_NUM		3
 
 #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
 #define MXC_INT_OWIRE MX35_INT_OWIRE
-#define MXC_INT_MMC_SDHC2 MX35_INT_MMC_SDHC2
-#define MXC_INT_MMC_SDHC3 MX35_INT_MMC_SDHC3
 #define MXC_INT_GPU2D MX35_INT_GPU2D
 #define MXC_INT_ASRC MX35_INT_ASRC
 #define MXC_INT_USBHS MX35_INT_USBHS
diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h
index 36d7ff27b5e2..f226ee3777e1 100644
--- a/arch/arm/plat-mxc/include/mach/mx3_camera.h
+++ b/arch/arm/plat-mxc/include/mach/mx3_camera.h
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #ifndef _MX3_CAMERA_H_
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 7a356de385f5..d1bd26d7b8a6 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -240,7 +240,7 @@
 
 #define MX3x_PROD_SIGNATURE		0x1	/* For MX31 */
 
-/* silicon revisions specific to i.MX31 */
+/* silicon revisions specific to i.MX31 and i.MX35 */
 #define MX3x_CHIP_REV_1_0		0x10
 #define MX3x_CHIP_REV_1_1		0x11
 #define MX3x_CHIP_REV_1_2		0x12
@@ -267,6 +267,14 @@ static inline int mx31_revision(void)
 {
 	return mx31_cpu_rev;
 }
+
+extern unsigned int mx35_cpu_rev;
+extern void mx35_read_cpu_rev(void);
+
+static inline int mx35_revision(void)
+{
+	return mx35_cpu_rev;
+}
 #endif
 
 #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
@@ -389,19 +397,6 @@ static inline int mx31_revision(void)
 #define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG
 #define MXC_INT_EXT_TV MX3x_INT_EXT_TV
 #define PROD_SIGNATURE MX3x_PROD_SIGNATURE
-#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0
-#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1
-#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2
-#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3
-#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0
-#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1
-#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2
-#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3
-#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0
-#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1
-#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
-#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
-#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
 #endif
 
 #endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 5aad344d5651..2af7a1056fc1 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_ARCH_MXC_MX51_H__
-#define __ASM_ARCH_MXC_MX51_H__
+#ifndef __MACH_MX51_H__
+#define __MACH_MX51_H__
 
 /*
  * MX51 memory map:
@@ -7,24 +7,23 @@
  *
  * Virt		Phys		Size	What
  * ---------------------------------------------------------------------------
- * FA3E0000	1FFE0000	128K	IRAM (SCCv2 RAM)
+ * fa3e0000	1ffe0000	128K	IRAM (SCCv2 RAM)
  *         	30000000	256M	GPU
  *         	40000000	512M	IPU
- * FA200000	60000000	1M	DEBUG
- * FB100000	70000000	1M	SPBA 0
- * FB000000	73F00000	1M	AIPS 1
- * FB200000	83F00000	1M	AIPS 2
- *		8FFFC000	16K	TZIC (interrupt controller)
+ * fa200000	60000000	1M	DEBUG
+ * fb100000	70000000	1M	SPBA 0
+ * fb000000	73f00000	1M	AIPS 1
+ * fb200000	83f00000	1M	AIPS 2
+ *		8fffc000	16K	TZIC (interrupt controller)
  *         	90000000	256M	CSD0 SDRAM/DDR
- *         	A0000000	256M	CSD1 SDRAM/DDR
- *         	B0000000	128M	CS0 Flash
- *         	B8000000	128M	CS1 Flash
- *         	C0000000	128M	CS2 Flash
- *         	C8000000	64M	CS3 Flash
- *         	CC000000	32M	CS4 SRAM
- *         	CE000000	32M	CS5 SRAM
- *		CFFF0000	64K	NFC (NAND Flash AXI)
- *
+ *         	a0000000	256M	CSD1 SDRAM/DDR
+ *         	b0000000	128M	CS0 Flash
+ *         	b8000000	128M	CS1 Flash
+ *         	c0000000	128M	CS2 Flash
+ *         	c8000000	64M	CS3 Flash
+ *         	cc000000	32M	CS4 SRAM
+ *         	ce000000	32M	CS5 SRAM
+ *		cfff0000	64K	NFC (NAND Flash AXI)
  */
 
 /*
@@ -36,65 +35,151 @@
 /*
  * IRAM
  */
-#define MX51_IRAM_BASE_ADDR		0x1FFE0000	/* internal ram */
-#define MX51_IRAM_BASE_ADDR_VIRT	0xFA3E0000
+#define MX51_IRAM_BASE_ADDR		0x1ffe0000	/* internal ram */
+#define MX51_IRAM_BASE_ADDR_VIRT	0xfa3e0000
 #define MX51_IRAM_PARTITIONS		16
-#define MX51_IRAM_PARTITIONS_TO1	12
 #define MX51_IRAM_SIZE		(MX51_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
 
+#define MX51_GPU_BASE_ADDR		0x20000000
+#define MX51_GPU_CTRL_BASE_ADDR		0x30000000
+#define MX51_IPU_CTRL_BASE_ADDR		0x40000000
+
+#define MX51_DEBUG_BASE_ADDR		0x60000000
+#define MX51_DEBUG_BASE_ADDR_VIRT	0xfa200000
+#define MX51_DEBUG_SIZE			SZ_1M
+
+#define MX51_ETB_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x01000)
+#define MX51_ETM_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x02000)
+#define MX51_TPIU_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x03000)
+#define MX51_CTI0_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x04000)
+#define MX51_CTI1_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x05000)
+#define MX51_CTI2_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x06000)
+#define MX51_CTI3_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x07000)
+#define MX51_CORTEX_DBG_BASE_ADDR	(MX51_DEBUG_BASE_ADDR + 0x08000)
+
 /*
- * NFC
+ * SPBA global module enabled #0
  */
-#define MX51_NFC_AXI_BASE_ADDR		0xCFFF0000	/* NAND flash AXI */
-#define MX51_NFC_AXI_SIZE		SZ_64K
+#define MX51_SPBA0_BASE_ADDR		0x70000000
+#define MX51_SPBA0_BASE_ADDR_VIRT	0xfb100000
+#define MX51_SPBA0_SIZE			SZ_1M
+
+#define MX51_ESDHC1_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x04000)
+#define MX51_ESDHC2_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x08000)
+#define MX51_UART3_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x0c000)
+#define MX51_ECSPI1_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x10000)
+#define MX51_SSI2_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x14000)
+#define MX51_ESDHC3_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x20000)
+#define MX51_ESDHC4_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x24000)
+#define MX51_SPDIF_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x28000)
+#define MX51_ATA_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x30000)
+#define MX51_SLIM_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x34000)
+#define MX51_HSI2C_DMA_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x38000)
+#define MX51_SPBA_CTRL_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x3c000)
 
 /*
- * Graphics Memory of GPU
+ * AIPS 1
  */
-#define MX51_GPU_BASE_ADDR		0x20000000
-#define MX51_GPU2D_BASE_ADDR		0xD0000000
+#define MX51_AIPS1_BASE_ADDR		0x73f00000
+#define MX51_AIPS1_BASE_ADDR_VIRT	0xfb000000
+#define MX51_AIPS1_SIZE			SZ_1M
+
+#define MX51_OTG_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_GPIO1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x84000)
+#define MX51_GPIO2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x88000)
+#define MX51_GPIO3_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x8c000)
+#define MX51_GPIO4_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x90000)
+#define MX51_KPP_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x94000)
+#define MX51_WDOG_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x98000)
+#define MX51_WDOG2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x9c000)
+#define MX51_GPT1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xa0000)
+#define MX51_SRTC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xa4000)
+#define MX51_IOMUXC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xa8000)
+#define MX51_EPIT1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xac000)
+#define MX51_EPIT2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xb0000)
+#define MX51_PWM1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xb4000)
+#define MX51_PWM2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xb8000)
+#define MX51_UART1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xbc000)
+#define MX51_UART2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xc0000)
+#define MX51_SRC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xd0000)
+#define MX51_CCM_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xd4000)
+#define MX51_GPC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xd8000)
 
-#define MX51_TZIC_BASE_ADDR_TO1		0x8FFFC000
-#define MX51_TZIC_BASE_ADDR		0xE0000000
+/*
+ * AIPS 2
+ */
+#define MX51_AIPS2_BASE_ADDR		0x83f00000
+#define MX51_AIPS2_BASE_ADDR_VIRT	0xfb200000
+#define MX51_AIPS2_SIZE			SZ_1M
 
-#define MX51_DEBUG_BASE_ADDR		0x60000000
-#define MX51_DEBUG_BASE_ADDR_VIRT	0xFA200000
-#define MX51_DEBUG_SIZE			SZ_1M
-#define MX51_ETB_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00001000)
-#define MX51_ETM_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00002000)
-#define MX51_TPIU_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00003000)
-#define MX51_CTI0_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00004000)
-#define MX51_CTI1_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00005000)
-#define MX51_CTI2_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00006000)
-#define MX51_CTI3_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x00007000)
-#define MX51_CORTEX_DBG_BASE_ADDR	(MX51_DEBUG_BASE_ADDR + 0x00008000)
+#define MX51_PLL1_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x80000)
+#define MX51_PLL2_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x84000)
+#define MX51_PLL3_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x88000)
+#define MX51_AHBMAX_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x94000)
+#define MX51_IIM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x98000)
+#define MX51_CSU_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x9c000)
+#define MX51_ARM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xa0000)
+#define MX51_OWIRE_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xa4000)
+#define MX51_FIRI_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xa8000)
+#define MX51_ECSPI2_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xac000)
+#define MX51_SDMA_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xb0000)
+#define MX51_SCC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xb4000)
+#define MX51_ROMCP_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xb8000)
+#define MX51_RTIC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xbc000)
+#define MX51_CSPI_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xc0000)
+#define MX51_I2C2_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xc4000)
+#define MX51_I2C1_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xc8000)
+#define MX51_SSI1_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xcc000)
+#define MX51_AUDMUX_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xd0000)
+#define MX51_M4IF_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xd8000)
+#define MX51_ESDCTL_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xd9000)
+#define MX51_WEIM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xda000)
+#define MX51_NFC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xdb000)
+#define MX51_EMI_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xdbf00)
+#define MX51_MIPI_HSC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xdc000)
+#define MX51_ATA_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe0000)
+#define MX51_SIM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe4000)
+#define MX51_SSI3BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe8000)
+#define MX51_FEC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xec000)
+#define MX51_TVE_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xf0000)
+#define MX51_VPU_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xf4000)
+#define MX51_SAHARA_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xf8000)
+
+#define MX51_CSD0_BASE_ADDR		0x90000000
+#define MX51_CSD1_BASE_ADDR		0xa0000000
+#define MX51_CS0_BASE_ADDR		0xb0000000
+#define MX51_CS1_BASE_ADDR		0xb8000000
+#define MX51_CS2_BASE_ADDR		0xc0000000
+#define MX51_CS3_BASE_ADDR		0xc8000000
+#define MX51_CS4_BASE_ADDR		0xcc000000
+#define MX51_CS5_BASE_ADDR		0xce000000
 
 /*
- * SPBA global module enabled #0
+ * NFC
  */
-#define MX51_SPBA0_BASE_ADDR 		0x70000000
-#define MX51_SPBA0_BASE_ADDR_VIRT	0xFB100000
-#define MX51_SPBA0_SIZE			SZ_1M
+#define MX51_NFC_AXI_BASE_ADDR		0xcfff0000	/* NAND flash AXI */
+#define MX51_NFC_AXI_SIZE		SZ_64K
+
+#define MX51_GPU2D_BASE_ADDR		0xd0000000
+#define MX51_TZIC_BASE_ADDR		0xe0000000
 
-#define MX51_MMC_SDHC1_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00004000)
-#define MX51_MMC_SDHC2_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00008000)
-#define MX51_UART3_BASE_ADDR 		(MX51_SPBA0_BASE_ADDR + 0x0000C000)
-#define MX51_CSPI1_BASE_ADDR 		(MX51_SPBA0_BASE_ADDR + 0x00010000)
-#define MX51_SSI2_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00014000)
-#define MX51_MMC_SDHC3_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00020000)
-#define MX51_MMC_SDHC4_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00024000)
-#define MX51_SPDIF_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00028000)
-#define MX51_ATA_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00030000)
-#define MX51_SLIM_DMA_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x00034000)
-#define MX51_HSI2C_DMA_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x00038000)
-#define MX51_SPBA_CTRL_BASE_ADDR	(MX51_SPBA0_BASE_ADDR + 0x0003C000)
+#define MX51_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX51_IRAM) ?:					\
+	IMX_IO_ADDRESS(x, MX51_DEBUG) ?:				\
+	IMX_IO_ADDRESS(x, MX51_SPBA0) ?:				\
+	IMX_IO_ADDRESS(x, MX51_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MX51_AIPS2))
+
+/* This is currently used in <mach/debug-macro.S>, but should go away */
+#define MX51_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
 
 /*
  * defines for SPBA modules
  */
 #define MX51_SPBA_SDHC1	0x04
 #define MX51_SPBA_SDHC2	0x08
-#define MX51_SPBA_UART3	0x0C
+#define MX51_SPBA_UART3	0x0c
 #define MX51_SPBA_CSPI1	0x10
 #define MX51_SPBA_SSI2	0x14
 #define MX51_SPBA_SDHC3	0x20
@@ -103,35 +188,7 @@
 #define MX51_SPBA_ATA	0x30
 #define MX51_SPBA_SLIM	0x34
 #define MX51_SPBA_HSI2C	0x38
-#define MX51_SPBA_CTRL	0x3C
-
-/*
- * AIPS 1
- */
-#define MX51_AIPS1_BASE_ADDR 	0x73F00000
-#define MX51_AIPS1_BASE_ADDR_VIRT	0xFB000000
-#define MX51_AIPS1_SIZE		SZ_1M
-
-#define MX51_OTG_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00080000)
-#define MX51_GPIO1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00084000)
-#define MX51_GPIO2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00088000)
-#define MX51_GPIO3_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x0008C000)
-#define MX51_GPIO4_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00090000)
-#define MX51_KPP_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00094000)
-#define MX51_WDOG_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x00098000)
-#define MX51_WDOG2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x0009C000)
-#define MX51_GPT1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A0000)
-#define MX51_SRTC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A4000)
-#define MX51_IOMUXC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000A8000)
-#define MX51_EPIT1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000AC000)
-#define MX51_EPIT2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B0000)
-#define MX51_PWM1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B4000)
-#define MX51_PWM2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000B8000)
-#define MX51_UART1_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000BC000)
-#define MX51_UART2_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000C0000)
-#define MX51_SRC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D0000)
-#define MX51_CCM_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D4000)
-#define MX51_GPC_BASE_ADDR	(MX51_AIPS1_BASE_ADDR + 0x000D8000)
+#define MX51_SPBA_CTRL	0x3c
 
 /*
  * Defines for modules using static and dynamic DMA channels
@@ -164,282 +221,186 @@
 #define MX51_MXC_DMA_CHANNEL_ATA_TX	MXC_DMA_DYNAMIC_CHANNEL
 #define MX51_MXC_DMA_CHANNEL_MEMORY	MXC_DMA_DYNAMIC_CHANNEL
 
-/*
- * AIPS 2
- */
-#define MX51_AIPS2_BASE_ADDR		0x83F00000
-#define MX51_AIPS2_BASE_ADDR_VIRT	0xFB200000
-#define MX51_AIPS2_SIZE			SZ_1M
-
-#define MX51_PLL1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00080000)
-#define MX51_PLL2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00084000)
-#define MX51_PLL3_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00088000)
-#define MX51_AHBMAX_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00094000)
-#define MX51_IIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x00098000)
-#define MX51_CSU_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x0009C000)
-#define MX51_ARM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000A0000)
-#define MX51_OWIRE_BASE_ADDR 	(MX51_AIPS2_BASE_ADDR + 0x000A4000)
-#define MX51_FIRI_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000A8000)
-#define MX51_CSPI2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000AC000)
-#define MX51_SDMA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B0000)
-#define MX51_SCC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B4000)
-#define MX51_ROMCP_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000B8000)
-#define MX51_RTIC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000BC000)
-#define MX51_CSPI3_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C0000)
-#define MX51_I2C2_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C4000)
-#define MX51_I2C1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000C8000)
-#define MX51_SSI1_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000CC000)
-#define MX51_AUDMUX_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D0000)
-#define MX51_M4IF_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D8000)
-#define MX51_ESDCTL_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000D9000)
-#define MX51_WEIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DA000)
-#define MX51_NFC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DB000)
-#define MX51_EMI_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DBF00)
-#define MX51_MIPI_HSC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000DC000)
-#define MX51_ATA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E0000)
-#define MX51_SIM_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E4000)
-#define MX51_SSI3BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000E8000)
-#define MX51_MXC_FEC_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000EC000)
-#define MX51_TVE_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F0000)
-#define MX51_VPU_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F4000)
-#define MX51_SAHARA_BASE_ADDR	(MX51_AIPS2_BASE_ADDR + 0x000F8000)
-
-/*
- * Memory regions and CS
- */
-#define MX51_GPU_CTRL_BASE_ADDR		0x30000000
-#define MX51_IPU_CTRL_BASE_ADDR		0x40000000
-#define MX51_CSD0_BASE_ADDR		0x90000000
-#define MX51_CSD1_BASE_ADDR		0xA0000000
-#define MX51_CS0_BASE_ADDR		0xB0000000
-#define MX51_CS1_BASE_ADDR		0xB8000000
-#define MX51_CS2_BASE_ADDR		0xC0000000
-#define MX51_CS3_BASE_ADDR		0xC8000000
-#define MX51_CS4_BASE_ADDR		0xCC000000
-#define MX51_CS5_BASE_ADDR		0xCE000000
-
-/* Does given address belongs to the specified memory region? */
-#define ADDRESS_IN_REGION(addr, start, size)			\
-	(((addr) >= (start)) && ((addr) < (start)+(size)))
-
-/* Does given address belongs to the specified named `module'? */
-#define MX51_IS_MODULE(addr, module)			       \
-	ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \
-				MX51_ ## module ## _SIZE)
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-
-#define MX51_IO_ADDRESS(x)					\
-	(void __iomem *)					\
-	(MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) :	\
-	MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) :	\
-	MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) :	\
-	MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) :	\
-	MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
-	0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-#define MX51_IRAM_IO_ADDRESS(x)  \
-	(((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
-
-#define MX51_DEBUG_IO_ADDRESS(x)  \
-	(((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
-
-#define MX51_SPBA0_IO_ADDRESS(x)  \
-	(((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT)
-
-#define MX51_AIPS1_IO_ADDRESS(x)  \
-	(((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
-
-#define MX51_AIPS2_IO_ADDRESS(x)  \
-	(((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
-
 #define MX51_IS_MEM_DEVICE_NONSHARED(x)		0
 
 /*
  * DMA request assignments
  */
-#define MX51_DMA_REQ_SSI3_TX1	47
-#define MX51_DMA_REQ_SSI3_RX1	46
-#define MX51_DMA_REQ_SPDIF	45
-#define MX51_DMA_REQ_UART3_TX	44
-#define MX51_DMA_REQ_UART3_RX	43
-#define MX51_DMA_REQ_SLIM_B_TX	42
-#define MX51_DMA_REQ_SDHC4	41
-#define MX51_DMA_REQ_SDHC3	40
-#define MX51_DMA_REQ_CSPI_TX	39
-#define MX51_DMA_REQ_CSPI_RX	38
-#define MX51_DMA_REQ_SSI3_TX2	37
-#define MX51_DMA_REQ_IPU	36
-#define MX51_DMA_REQ_SSI3_RX2	35
-#define MX51_DMA_REQ_EPIT2	34
-#define MX51_DMA_REQ_CTI2_1	33
-#define MX51_DMA_REQ_EMI_WR	32
-#define MX51_DMA_REQ_CTI2_0	31
-#define MX51_DMA_REQ_EMI_RD	30
-#define MX51_DMA_REQ_SSI1_TX1	29
-#define MX51_DMA_REQ_SSI1_RX1	28
-#define MX51_DMA_REQ_SSI1_TX2	27
-#define MX51_DMA_REQ_SSI1_RX2	26
-#define MX51_DMA_REQ_SSI2_TX1	25
-#define MX51_DMA_REQ_SSI2_RX1	24
-#define MX51_DMA_REQ_SSI2_TX2	23
-#define MX51_DMA_REQ_SSI2_RX2	22
-#define MX51_DMA_REQ_SDHC2	21
-#define MX51_DMA_REQ_SDHC1	20
-#define MX51_DMA_REQ_UART1_TX	19
-#define MX51_DMA_REQ_UART1_RX	18
-#define MX51_DMA_REQ_UART2_TX	17
-#define MX51_DMA_REQ_UART2_RX	16
-#define MX51_DMA_REQ_GPU	15
-#define MX51_DMA_REQ_EXTREQ1	14
-#define MX51_DMA_REQ_FIRI_TX	13
-#define MX51_DMA_REQ_FIRI_RX	12
-#define MX51_DMA_REQ_HS_I2C_RX	11
-#define MX51_DMA_REQ_HS_I2C_TX	10
-#define MX51_DMA_REQ_CSPI2_TX	9
-#define MX51_DMA_REQ_CSPI2_RX	8
-#define MX51_DMA_REQ_CSPI1_TX	7
-#define MX51_DMA_REQ_CSPI1_RX	6
-#define MX51_DMA_REQ_SLIM_B	5
-#define MX51_DMA_REQ_ATA_TX_END	4
-#define MX51_DMA_REQ_ATA_TX	3
-#define MX51_DMA_REQ_ATA_RX	2
-#define MX51_DMA_REQ_GPC	1
-#define MX51_DMA_REQ_VPU	0
+#define MX51_DMA_REQ_VPU		0
+#define MX51_DMA_REQ_GPC		1
+#define MX51_DMA_REQ_ATA_RX		2
+#define MX51_DMA_REQ_ATA_TX		3
+#define MX51_DMA_REQ_ATA_TX_END		4
+#define MX51_DMA_REQ_SLIM_B		5
+#define MX51_DMA_REQ_CSPI1_RX		6
+#define MX51_DMA_REQ_CSPI1_TX		7
+#define MX51_DMA_REQ_CSPI2_RX		8
+#define MX51_DMA_REQ_CSPI2_TX		9
+#define MX51_DMA_REQ_HS_I2C_TX		10
+#define MX51_DMA_REQ_HS_I2C_RX		11
+#define MX51_DMA_REQ_FIRI_RX		12
+#define MX51_DMA_REQ_FIRI_TX		13
+#define MX51_DMA_REQ_EXTREQ1		14
+#define MX51_DMA_REQ_GPU		15
+#define MX51_DMA_REQ_UART2_RX		16
+#define MX51_DMA_REQ_UART2_TX		17
+#define MX51_DMA_REQ_UART1_RX		18
+#define MX51_DMA_REQ_UART1_TX		19
+#define MX51_DMA_REQ_SDHC1		20
+#define MX51_DMA_REQ_SDHC2		21
+#define MX51_DMA_REQ_SSI2_RX1		22
+#define MX51_DMA_REQ_SSI2_TX1		23
+#define MX51_DMA_REQ_SSI2_RX0		24
+#define MX51_DMA_REQ_SSI2_TX0		25
+#define MX51_DMA_REQ_SSI1_RX1		26
+#define MX51_DMA_REQ_SSI1_TX1		27
+#define MX51_DMA_REQ_SSI1_RX0		28
+#define MX51_DMA_REQ_SSI1_TX0		29
+#define MX51_DMA_REQ_EMI_RD		30
+#define MX51_DMA_REQ_CTI2_0		31
+#define MX51_DMA_REQ_EMI_WR		32
+#define MX51_DMA_REQ_CTI2_1		33
+#define MX51_DMA_REQ_EPIT2		34
+#define MX51_DMA_REQ_SSI3_RX2		35
+#define MX51_DMA_REQ_IPU		36
+#define MX51_DMA_REQ_SSI3_TX2		37
+#define MX51_DMA_REQ_CSPI_RX		38
+#define MX51_DMA_REQ_CSPI_TX		39
+#define MX51_DMA_REQ_SDHC3		40
+#define MX51_DMA_REQ_SDHC4		41
+#define MX51_DMA_REQ_SLIM_B_TX		42
+#define MX51_DMA_REQ_UART3_RX		43
+#define MX51_DMA_REQ_UART3_TX		44
+#define MX51_DMA_REQ_SPDIF		45
+#define MX51_DMA_REQ_SSI3_RX1		46
+#define MX51_DMA_REQ_SSI3_TX1		47
 
 /*
  * Interrupt numbers
  */
-#define MX51_MXC_INT_BASE	0
-#define MX51_MXC_INT_RESV0	0
-#define MX51_MXC_INT_MMC_SDHC1	1
-#define MX51_MXC_INT_MMC_SDHC2	2
-#define MX51_MXC_INT_MMC_SDHC3	3
-#define MX51_MXC_INT_MMC_SDHC4	4
-#define MX51_MXC_INT_RESV5	5
-#define MX51_MXC_INT_SDMA	6
-#define MX51_MXC_INT_IOMUX	7
-#define MX51_MXC_INT_NFC	8
-#define MX51_MXC_INT_VPU	9
-#define MX51_MXC_INT_IPU_ERR	10
-#define MX51_MXC_INT_IPU_SYN	11
-#define MX51_MXC_INT_GPU	12
-#define MX51_MXC_INT_RESV13	13
-#define MX51_MXC_INT_USB_H1	14
-#define MX51_MXC_INT_EMI	15
-#define MX51_MXC_INT_USB_H2	16
-#define MX51_MXC_INT_USB_H3	17
-#define MX51_MXC_INT_USB_OTG	18
-#define MX51_MXC_INT_SAHARA_H0	19
-#define MX51_MXC_INT_SAHARA_H1	20
-#define MX51_MXC_INT_SCC_SMN	21
-#define MX51_MXC_INT_SCC_STZ	22
-#define MX51_MXC_INT_SCC_SCM	23
-#define MX51_MXC_INT_SRTC_NTZ	24
-#define MX51_MXC_INT_SRTC_TZ	25
-#define MX51_MXC_INT_RTIC	26
-#define MX51_MXC_INT_CSU	27
-#define MX51_MXC_INT_SLIM_B	28
-#define MX51_MXC_INT_SSI1	29
-#define MX51_MXC_INT_SSI2	30
-#define MX51_MXC_INT_UART1	31
-#define MX51_MXC_INT_UART2	32
-#define MX51_MXC_INT_UART3	33
-#define MX51_MXC_INT_RESV34	34
-#define MX51_MXC_INT_RESV35	35
-#define MX51_MXC_INT_CSPI1	36
-#define MX51_MXC_INT_CSPI2	37
-#define MX51_MXC_INT_CSPI	38
-#define MX51_MXC_INT_GPT	39
-#define MX51_MXC_INT_EPIT1	40
-#define MX51_MXC_INT_EPIT2	41
-#define MX51_MXC_INT_GPIO1_INT7	42
-#define MX51_MXC_INT_GPIO1_INT6	43
-#define MX51_MXC_INT_GPIO1_INT5	44
-#define MX51_MXC_INT_GPIO1_INT4	45
-#define MX51_MXC_INT_GPIO1_INT3	46
-#define MX51_MXC_INT_GPIO1_INT2	47
-#define MX51_MXC_INT_GPIO1_INT1	48
-#define MX51_MXC_INT_GPIO1_INT0	49
-#define MX51_MXC_INT_GPIO1_LOW	50
-#define MX51_MXC_INT_GPIO1_HIGH	51
-#define MX51_MXC_INT_GPIO2_LOW	52
-#define MX51_MXC_INT_GPIO2_HIGH	53
-#define MX51_MXC_INT_GPIO3_LOW	54
-#define MX51_MXC_INT_GPIO3_HIGH	55
-#define MX51_MXC_INT_GPIO4_LOW	56
-#define MX51_MXC_INT_GPIO4_HIGH	57
-#define MX51_MXC_INT_WDOG1	58
-#define MX51_MXC_INT_WDOG2	59
-#define MX51_MXC_INT_KPP	60
-#define MX51_MXC_INT_PWM1	61
-#define MX51_MXC_INT_I2C1	62
-#define MX51_MXC_INT_I2C2	63
-#define MX51_MXC_INT_HS_I2C	64
-#define MX51_MXC_INT_RESV65	65
-#define MX51_MXC_INT_RESV66	66
-#define MX51_MXC_INT_SIM_IPB	67
-#define MX51_MXC_INT_SIM_DAT	68
-#define MX51_MXC_INT_IIM	69
-#define MX51_MXC_INT_ATA	70
-#define MX51_MXC_INT_CCM1	71
-#define MX51_MXC_INT_CCM2	72
-#define MX51_MXC_INT_GPC1	73
-#define MX51_MXC_INT_GPC2	74
-#define MX51_MXC_INT_SRC	75
-#define MX51_MXC_INT_NM		76
-#define MX51_MXC_INT_PMU	77
-#define MX51_MXC_INT_CTI_IRQ	78
-#define MX51_MXC_INT_CTI1_TG0	79
-#define MX51_MXC_INT_CTI1_TG1	80
-#define MX51_MXC_INT_MCG_ERR	81
-#define MX51_MXC_INT_MCG_TMR	82
-#define MX51_MXC_INT_MCG_FUNC	83
-#define MX51_MXC_INT_GPU2_IRQ	84
-#define MX51_MXC_INT_GPU2_BUSY	85
-#define MX51_MXC_INT_RESV86	86
-#define MX51_MXC_INT_FEC	87
-#define MX51_MXC_INT_OWIRE	88
-#define MX51_MXC_INT_CTI1_TG2	89
-#define MX51_MXC_INT_SJC	90
-#define MX51_MXC_INT_SPDIF	91
-#define MX51_MXC_INT_TVE	92
-#define MX51_MXC_INT_FIRI	93
-#define MX51_MXC_INT_PWM2	94
-#define MX51_MXC_INT_SLIM_EXP	95
-#define MX51_MXC_INT_SSI3	96
-#define MX51_MXC_INT_EMI_BOOT	97
-#define MX51_MXC_INT_CTI1_TG3	98
-#define MX51_MXC_INT_SMC_RX	99
-#define MX51_MXC_INT_VPU_IDLE	100
-#define MX51_MXC_INT_EMI_NFC	101
-#define MX51_MXC_INT_GPU_IDLE	102
+#define MX51_MXC_INT_BASE		0
+#define MX51_MXC_INT_RESV0		0
+#define MX51_INT_ESDHC1			1
+#define MX51_INT_ESDHC2			2
+#define MX51_INT_ESDHC3			3
+#define MX51_INT_ESDHC4			4
+#define MX51_MXC_INT_RESV5		5
+#define MX51_INT_SDMA			6
+#define MX51_MXC_INT_IOMUX		7
+#define MX51_INT_NFC			8
+#define MX51_MXC_INT_VPU		9
+#define MX51_MXC_INT_IPU_ERR		10
+#define MX51_MXC_INT_IPU_SYN		11
+#define MX51_MXC_INT_GPU		12
+#define MX51_MXC_INT_RESV13		13
+#define MX51_MXC_INT_USB_H1		14
+#define MX51_MXC_INT_EMI		15
+#define MX51_MXC_INT_USB_H2		16
+#define MX51_MXC_INT_USB_H3		17
+#define MX51_MXC_INT_USB_OTG		18
+#define MX51_MXC_INT_SAHARA_H0		19
+#define MX51_MXC_INT_SAHARA_H1		20
+#define MX51_MXC_INT_SCC_SMN		21
+#define MX51_MXC_INT_SCC_STZ		22
+#define MX51_MXC_INT_SCC_SCM		23
+#define MX51_MXC_INT_SRTC_NTZ		24
+#define MX51_MXC_INT_SRTC_TZ		25
+#define MX51_MXC_INT_RTIC		26
+#define MX51_MXC_INT_CSU		27
+#define MX51_MXC_INT_SLIM_B		28
+#define MX51_INT_SSI1			29
+#define MX51_INT_SSI2			30
+#define MX51_INT_UART1			31
+#define MX51_INT_UART2			32
+#define MX51_INT_UART3			33
+#define MX51_MXC_INT_RESV34		34
+#define MX51_MXC_INT_RESV35		35
+#define MX51_INT_ECSPI1			36
+#define MX51_INT_ECSPI2			37
+#define MX51_INT_CSPI			38
+#define MX51_MXC_INT_GPT		39
+#define MX51_MXC_INT_EPIT1		40
+#define MX51_MXC_INT_EPIT2		41
+#define MX51_MXC_INT_GPIO1_INT7		42
+#define MX51_MXC_INT_GPIO1_INT6		43
+#define MX51_MXC_INT_GPIO1_INT5		44
+#define MX51_MXC_INT_GPIO1_INT4		45
+#define MX51_MXC_INT_GPIO1_INT3		46
+#define MX51_MXC_INT_GPIO1_INT2		47
+#define MX51_MXC_INT_GPIO1_INT1		48
+#define MX51_MXC_INT_GPIO1_INT0		49
+#define MX51_MXC_INT_GPIO1_LOW		50
+#define MX51_MXC_INT_GPIO1_HIGH		51
+#define MX51_MXC_INT_GPIO2_LOW		52
+#define MX51_MXC_INT_GPIO2_HIGH		53
+#define MX51_MXC_INT_GPIO3_LOW		54
+#define MX51_MXC_INT_GPIO3_HIGH		55
+#define MX51_MXC_INT_GPIO4_LOW		56
+#define MX51_MXC_INT_GPIO4_HIGH		57
+#define MX51_MXC_INT_WDOG1		58
+#define MX51_MXC_INT_WDOG2		59
+#define MX51_MXC_INT_KPP		60
+#define MX51_MXC_INT_PWM1		61
+#define MX51_INT_I2C1			62
+#define MX51_INT_I2C2			63
+#define MX51_MXC_INT_HS_I2C		64
+#define MX51_MXC_INT_RESV65		65
+#define MX51_MXC_INT_RESV66		66
+#define MX51_MXC_INT_SIM_IPB		67
+#define MX51_MXC_INT_SIM_DAT		68
+#define MX51_MXC_INT_IIM		69
+#define MX51_MXC_INT_ATA		70
+#define MX51_MXC_INT_CCM1		71
+#define MX51_MXC_INT_CCM2		72
+#define MX51_MXC_INT_GPC1		73
+#define MX51_MXC_INT_GPC2		74
+#define MX51_MXC_INT_SRC		75
+#define MX51_MXC_INT_NM			76
+#define MX51_MXC_INT_PMU		77
+#define MX51_MXC_INT_CTI_IRQ		78
+#define MX51_MXC_INT_CTI1_TG0		79
+#define MX51_MXC_INT_CTI1_TG1		80
+#define MX51_MXC_INT_MCG_ERR		81
+#define MX51_MXC_INT_MCG_TMR		82
+#define MX51_MXC_INT_MCG_FUNC		83
+#define MX51_MXC_INT_GPU2_IRQ		84
+#define MX51_MXC_INT_GPU2_BUSY		85
+#define MX51_MXC_INT_RESV86		86
+#define MX51_INT_FEC			87
+#define MX51_MXC_INT_OWIRE		88
+#define MX51_MXC_INT_CTI1_TG2		89
+#define MX51_MXC_INT_SJC		90
+#define MX51_MXC_INT_SPDIF		91
+#define MX51_MXC_INT_TVE		92
+#define MX51_MXC_INT_FIRI		93
+#define MX51_MXC_INT_PWM2		94
+#define MX51_MXC_INT_SLIM_EXP		95
+#define MX51_MXC_INT_SSI3		96
+#define MX51_MXC_INT_EMI_BOOT		97
+#define MX51_MXC_INT_CTI1_TG3		98
+#define MX51_MXC_INT_SMC_RX		99
+#define MX51_MXC_INT_VPU_IDLE		100
+#define MX51_MXC_INT_EMI_NFC		101
+#define MX51_MXC_INT_GPU_IDLE		102
 
 /* silicon revisions specific to i.MX51 */
-#define MX51_CHIP_REV_1_0	0x10
-#define MX51_CHIP_REV_1_1	0x11
-#define MX51_CHIP_REV_1_2	0x12
-#define MX51_CHIP_REV_1_3	0x13
-#define MX51_CHIP_REV_2_0	0x20
-#define MX51_CHIP_REV_2_1	0x21
-#define MX51_CHIP_REV_2_2	0x22
-#define MX51_CHIP_REV_2_3	0x23
-#define MX51_CHIP_REV_3_0	0x30
-#define MX51_CHIP_REV_3_1	0x31
-#define MX51_CHIP_REV_3_2	0x32
-
-/* Mandatory defines used globally */
+#define MX51_CHIP_REV_1_0		0x10
+#define MX51_CHIP_REV_1_1		0x11
+#define MX51_CHIP_REV_1_2		0x12
+#define MX51_CHIP_REV_1_3		0x13
+#define MX51_CHIP_REV_2_0		0x20
+#define MX51_CHIP_REV_2_1		0x21
+#define MX51_CHIP_REV_2_2		0x22
+#define MX51_CHIP_REV_2_3		0x23
+#define MX51_CHIP_REV_3_0		0x30
+#define MX51_CHIP_REV_3_1		0x31
+#define MX51_CHIP_REV_3_2		0x32
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
 extern int mx51_revision(void);
 #endif
 
-#endif	/*  __ASM_ARCH_MXC_MX51_H__ */
+/* tape-out 1 defines */
+#define MX51_TZIC_BASE_ADDR_TO1		0x8fffc000
+
+#endif	/* ifndef __MACH_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index a790bf212972..a42c7207082d 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2007, 2010 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
  * This program is free software; you can redistribute it and/or
@@ -20,6 +20,8 @@
 #ifndef __ASM_ARCH_MXC_H__
 #define __ASM_ARCH_MXC_H__
 
+#include <linux/types.h>
+
 #ifndef __ASM_ARCH_MXC_HARDWARE_H__
 #error "Do not include directly."
 #endif
@@ -133,6 +135,15 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mxc91231()	(0)
 #endif
 
+#ifndef __ASSEMBLY__
+
+struct cpu_op {
+	u32 cpu_rate;
+};
+
+extern struct cpu_op *(*get_cpu_op)(int *op);
+#endif
+
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
 /* These are deprecated, use mx[23][157]_setup_weimcs instead. */
 #define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 5182b986b785..0ca3101ebf36 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #ifndef __MACH_MXC91231_H__
 #define __MACH_MXC91231_H__
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
index 5d2d21d414e0..04c0d060d814 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h
@@ -20,9 +20,13 @@
 #ifndef __ASM_ARCH_NAND_H
 #define __ASM_ARCH_NAND_H
 
+#include <linux/mtd/partitions.h>
+
 struct mxc_nand_platform_data {
-	int width;	/* data bus width in bytes */
-	int hw_ecc:1;	/* 0 if supress hardware ECC */
-	int flash_bbt:1; /* set to 1 to use a flash based bbt */
+	unsigned int width;	/* data bus width in bytes */
+	unsigned int hw_ecc:1;	/* 0 if supress hardware ECC */
+	unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
+	struct mtd_partition *parts;	/* partition table */
+	int nr_parts;			/* size of parts */
 };
 #endif /* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h
new file mode 100644
index 000000000000..9be112227ac4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/sdma.h
@@ -0,0 +1,17 @@
+#ifndef __MACH_MXC_SDMA_H__
+#define __MACH_MXC_SDMA_H__
+
+/**
+ * struct sdma_platform_data - platform specific data for SDMA engine
+ *
+ * @sdma_version	The version of this SDMA engine
+ * @cpu_name		used to generate the firmware name
+ * @to_version		CPU Tape out version
+ */
+struct sdma_platform_data {
+	int sdma_version;
+	char *cpu_name;
+	int to_version;
+};
+
+#endif /* __MACH_MXC_SDMA_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h
index c34ded523f10..63f3c2804239 100644
--- a/arch/arm/plat-mxc/include/mach/ssi.h
+++ b/arch/arm/plat-mxc/include/mach/ssi.h
@@ -10,6 +10,9 @@ struct imx_ssi_platform_data {
 	unsigned int flags;
 #define IMX_SSI_DMA            (1 << 0)
 #define IMX_SSI_USE_AC97       (1 << 1)
+#define IMX_SSI_NET            (1 << 2)
+#define IMX_SSI_SYN            (1 << 3)
+#define IMX_SSI_USE_I2S_SLAVE  (1 << 4)
 	void (*ac97_reset) (struct snd_ac97 *ac97);
 	void (*ac97_warm_reset)(struct snd_ac97 *ac97);
 };
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index ef00199568de..95be51bfe9a9 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -1,7 +1,7 @@
 /*
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -12,10 +12,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
@@ -32,8 +28,34 @@ static inline void arch_idle(void)
 		mxc91231_prepare_idle();
 	}
 #endif
-
-	cpu_do_idle();
+	/* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */
+	if (cpu_is_mx31() || cpu_is_mx35()) {
+		unsigned long reg = 0;
+		__asm__ __volatile__(
+			/* disable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"bic %0, %0, #0x00001000\n"
+			"bic %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			/* invalidate I cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c5, 0\n"
+			/* clear and invalidate D cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c14, 0\n"
+			/* WFI */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c0, 4\n"
+			"nop\n" "nop\n" "nop\n" "nop\n"
+			"nop\n" "nop\n" "nop\n"
+			/* enable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"orr %0, %0, #0x00001000\n"
+			"orr %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			: "=r" (reg));
+	} else
+		cpu_do_idle();
 }
 
 void arch_reset(char mode, const char *cmd);
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 024416ed11cd..2d9624697cc9 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __ASM_ARCH_MXC_TIMEX_H__
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index b6d3d0fddc48..9dd9c2085aad 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -13,10 +13,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
 #define __ASM_ARCH_MXC_UNCOMPRESS_H__
@@ -103,6 +99,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 		uart_base = MX3X_UART2_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX51_BABBAGE:
+	case MACH_TYPE_EUKREA_CPUIMX51SD:
 		uart_base = MX51_UART1_BASE_ADDR;
 		break;
 	default:
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
index 44243a278434..ef6379c474be 100644
--- a/arch/arm/plat-mxc/include/mach/vmalloc.h
+++ b/arch/arm/plat-mxc/include/mach/vmalloc.h
@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __ASM_ARCH_MXC_VMALLOC_H__
diff --git a/arch/arm/plat-mxc/iram_alloc.c b/arch/arm/plat-mxc/iram_alloc.c
new file mode 100644
index 000000000000..074c3869626a
--- /dev/null
+++ b/arch/arm/plat-mxc/iram_alloc.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/genalloc.h>
+#include <mach/iram.h>
+
+static unsigned long iram_phys_base;
+static void __iomem *iram_virt_base;
+static struct gen_pool *iram_pool;
+
+static inline void __iomem *iram_phys_to_virt(unsigned long p)
+{
+	return iram_virt_base + (p - iram_phys_base);
+}
+
+void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
+{
+	if (!iram_pool)
+		return NULL;
+
+	*dma_addr = gen_pool_alloc(iram_pool, size);
+	pr_debug("iram alloc - %dB@0x%lX\n", size, *dma_addr);
+	if (!*dma_addr)
+		return NULL;
+	return iram_phys_to_virt(*dma_addr);
+}
+EXPORT_SYMBOL(iram_alloc);
+
+void iram_free(unsigned long addr, unsigned int size)
+{
+	if (!iram_pool)
+		return;
+
+	gen_pool_free(iram_pool, addr, size);
+}
+EXPORT_SYMBOL(iram_free);
+
+int __init iram_init(unsigned long base, unsigned long size)
+{
+	iram_phys_base = base;
+
+	iram_pool = gen_pool_create(PAGE_SHIFT, -1);
+	if (!iram_pool)
+		return -ENOMEM;
+
+	gen_pool_add(iram_pool, base, size, -1);
+	iram_virt_base = ioremap(iram_phys_base, size);
+	if (!iram_virt_base)
+		return -EIO;
+
+	pr_debug("i.MX IRAM pool: %ld KB@0x%p\n", size / 1024, iram_virt_base);
+	return 0;
+}
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 778ddfe57d89..7331f2ace5fe 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -142,9 +142,6 @@ void __init mxc_init_irq(void __iomem *irqbase)
 	for (i = 0; i < 8; i++)
 		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
 
-	/* init architectures chained interrupt handler */
-	mxc_register_gpios();
-
 #ifdef CONFIG_FIQ
 	/* Initialize FIQ */
 	init_FIQ();
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 97f42799fa58..925bce4607e7 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -14,10 +14,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 9b86d2a60d43..3703ab28257f 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -145,8 +145,6 @@ void __init tzic_init_irq(void __iomem *irqbase)
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID);
 	}
-	mxc_register_gpios();
-
 	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
 }
 
@@ -166,8 +164,9 @@ int tzic_enable_wake(int is_idle)
 		return -EAGAIN;
 
 	for (i = 0; i < 4; i++) {
-		v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
-		__raw_writel(v, TZIC_WAKEUP0(i));
+		v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
+			wakeup_intr[i];
+		__raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
 	}
 
 	return 0;
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index 5a6ef252c38b..85e6fd212a41 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -23,6 +23,7 @@
 #include <linux/irq.h>
 #include <linux/slab.h>
 
+#include <plat/pincfg.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 
@@ -46,28 +47,246 @@ struct nmk_gpio_chip {
 	u32 edge_falling;
 };
 
+static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, int gpio_mode)
+{
+	u32 bit = 1 << offset;
+	u32 afunc, bfunc;
+
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+	if (gpio_mode & NMK_GPIO_ALT_A)
+		afunc |= bit;
+	if (gpio_mode & NMK_GPIO_ALT_B)
+		bfunc |= bit;
+	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+}
+
+static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, enum nmk_gpio_slpm mode)
+{
+	u32 bit = 1 << offset;
+	u32 slpm;
+
+	slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC);
+	if (mode == NMK_GPIO_SLPM_NOCHANGE)
+		slpm |= bit;
+	else
+		slpm &= ~bit;
+	writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC);
+}
+
+static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip,
+				unsigned offset, enum nmk_gpio_pull pull)
+{
+	u32 bit = 1 << offset;
+	u32 pdis;
+
+	pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS);
+	if (pull == NMK_GPIO_PULL_NONE)
+		pdis |= bit;
+	else
+		pdis &= ~bit;
+	writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS);
+
+	if (pull == NMK_GPIO_PULL_UP)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+	else if (pull == NMK_GPIO_PULL_DOWN)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip,
+				  unsigned offset)
+{
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+}
+
+static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip,
+				  unsigned offset, int val)
+{
+	if (val)
+		writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS);
+	else
+		writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip,
+				  unsigned offset, int val)
+{
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+	__nmk_gpio_set_output(nmk_chip, offset, val);
+}
+
+static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
+			     pin_cfg_t cfg)
+{
+	static const char *afnames[] = {
+		[NMK_GPIO_ALT_GPIO]	= "GPIO",
+		[NMK_GPIO_ALT_A]	= "A",
+		[NMK_GPIO_ALT_B]	= "B",
+		[NMK_GPIO_ALT_C]	= "C"
+	};
+	static const char *pullnames[] = {
+		[NMK_GPIO_PULL_NONE]	= "none",
+		[NMK_GPIO_PULL_UP]	= "up",
+		[NMK_GPIO_PULL_DOWN]	= "down",
+		[3] /* illegal */	= "??"
+	};
+	static const char *slpmnames[] = {
+		[NMK_GPIO_SLPM_INPUT]		= "input/wakeup",
+		[NMK_GPIO_SLPM_NOCHANGE]	= "no-change/no-wakeup",
+	};
+
+	int pin = PIN_NUM(cfg);
+	int pull = PIN_PULL(cfg);
+	int af = PIN_ALT(cfg);
+	int slpm = PIN_SLPM(cfg);
+	int output = PIN_DIR(cfg);
+	int val = PIN_VAL(cfg);
+
+	dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s (%s%s)\n",
+		pin, afnames[af], pullnames[pull], slpmnames[slpm],
+		output ? "output " : "input",
+		output ? (val ? "high" : "low") : "");
+
+	if (output)
+		__nmk_gpio_make_output(nmk_chip, offset, val);
+	else {
+		__nmk_gpio_make_input(nmk_chip, offset);
+		__nmk_gpio_set_pull(nmk_chip, offset, pull);
+	}
+
+	__nmk_gpio_set_slpm(nmk_chip, offset, slpm);
+	__nmk_gpio_set_mode(nmk_chip, offset, af);
+}
+
+/**
+ * nmk_config_pin - configure a pin's mux attributes
+ * @cfg: pin confguration
+ *
+ * Configures a pin's mode (alternate function or GPIO), its pull up status,
+ * and its sleep mode based on the specified configuration.  The @cfg is
+ * usually one of the SoC specific macros defined in mach/<soc>-pins.h.  These
+ * are constructed using, and can be further enhanced with, the macros in
+ * plat/pincfg.h.
+ *
+ * If a pin's mode is set to GPIO, it is configured as an input to avoid
+ * side-effects.  The gpio can be manipulated later using standard GPIO API
+ * calls.
+ */
+int nmk_config_pin(pin_cfg_t cfg)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	int gpio = PIN_NUM(cfg);
+	unsigned long flags;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(nmk_config_pin);
+
+/**
+ * nmk_config_pins - configure several pins at once
+ * @cfgs: array of pin configurations
+ * @num: number of elments in the array
+ *
+ * Configures several pins using nmk_config_pin().  Refer to that function for
+ * further information.
+ */
+int nmk_config_pins(pin_cfg_t *cfgs, int num)
+{
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		int ret = nmk_config_pin(cfgs[i]);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(nmk_config_pins);
+
+/**
+ * nmk_gpio_set_slpm() - configure the sleep mode of a pin
+ * @gpio: pin number
+ * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
+ *
+ * Sets the sleep mode of a pin.  If @mode is NMK_GPIO_SLPM_INPUT, the pin is
+ * changed to an input (with pullup/down enabled) in sleep and deep sleep.  If
+ * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
+ * configured even when in sleep and deep sleep.
+ *
+ * On DB8500v2 onwards, this setting loses the previous meaning and instead
+ * indicates if wakeup detection is enabled on the pin.  Note that
+ * enable_irq_wake() will automatically enable wakeup detection.
+ */
+int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+
+/**
+ * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio
+ * @gpio: pin number
+ * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE
+ *
+ * Enables/disables pull up/down on a specified pin.  This only takes effect if
+ * the pin is configured as an input (either explicitly or by the alternate
+ * function).
+ *
+ * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is
+ * configured as an input.  Otherwise, due to the way the controller registers
+ * work, this function will change the value output on the pin.
+ */
+int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+
 /* Mode functions */
 int nmk_gpio_set_mode(int gpio, int gpio_mode)
 {
 	struct nmk_gpio_chip *nmk_chip;
 	unsigned long flags;
-	u32 afunc, bfunc, bit;
 
 	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
 	if (!nmk_chip)
 		return -EINVAL;
 
-	bit = 1 << (gpio - nmk_chip->chip.base);
-
 	spin_lock_irqsave(&nmk_chip->lock, flags);
-	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
-	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
-	if (gpio_mode & NMK_GPIO_ALT_A)
-		afunc |= bit;
-	if (gpio_mode & NMK_GPIO_ALT_B)
-		bfunc |= bit;
-	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
-	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+	__nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode);
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
 
 	return 0;
@@ -111,32 +330,41 @@ static void nmk_gpio_irq_ack(unsigned int irq)
 	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
 }
 
+enum nmk_gpio_irq_type {
+	NORMAL,
+	WAKE,
+};
+
 static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
-				  int gpio, bool enable)
+				  int gpio, enum nmk_gpio_irq_type which,
+				  bool enable)
 {
+	u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC;
+	u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC;
 	u32 bitmask = nmk_gpio_get_bitmask(gpio);
 	u32 reg;
 
 	/* we must individually set/clear the two edges */
 	if (nmk_chip->edge_rising & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_RIMSC);
+		reg = readl(nmk_chip->addr + rimsc);
 		if (enable)
 			reg |= bitmask;
 		else
 			reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_RIMSC);
+		writel(reg, nmk_chip->addr + rimsc);
 	}
 	if (nmk_chip->edge_falling & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_FIMSC);
+		reg = readl(nmk_chip->addr + fimsc);
 		if (enable)
 			reg |= bitmask;
 		else
 			reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_FIMSC);
+		writel(reg, nmk_chip->addr + fimsc);
 	}
 }
 
-static void nmk_gpio_irq_modify(unsigned int irq, bool enable)
+static int nmk_gpio_irq_modify(unsigned int irq, enum nmk_gpio_irq_type which,
+			       bool enable)
 {
 	int gpio;
 	struct nmk_gpio_chip *nmk_chip;
@@ -147,26 +375,55 @@ static void nmk_gpio_irq_modify(unsigned int irq, bool enable)
 	nmk_chip = get_irq_chip_data(irq);
 	bitmask = nmk_gpio_get_bitmask(gpio);
 	if (!nmk_chip)
-		return;
+		return -EINVAL;
 
 	spin_lock_irqsave(&nmk_chip->lock, flags);
-	__nmk_gpio_irq_modify(nmk_chip, gpio, enable);
+	__nmk_gpio_irq_modify(nmk_chip, gpio, which, enable);
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
 }
 
 static void nmk_gpio_irq_mask(unsigned int irq)
 {
-	nmk_gpio_irq_modify(irq, false);
-};
+	nmk_gpio_irq_modify(irq, NORMAL, false);
+}
 
 static void nmk_gpio_irq_unmask(unsigned int irq)
 {
-	nmk_gpio_irq_modify(irq, true);
+	nmk_gpio_irq_modify(irq, NORMAL, true);
+}
+
+static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	int gpio;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	if (!nmk_chip)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+#ifdef CONFIG_ARCH_U8500
+	if (cpu_is_u8500v2()) {
+		__nmk_gpio_set_slpm(nmk_chip, gpio,
+				    on ? NMK_GPIO_SLPM_WAKEUP_ENABLE
+				       : NMK_GPIO_SLPM_WAKEUP_DISABLE);
+	}
+#endif
+	__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
 }
 
 static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
 {
-	bool enabled = !(irq_to_desc(irq)->status & IRQ_DISABLED);
+	struct irq_desc *desc = irq_to_desc(irq);
+	bool enabled = !(desc->status & IRQ_DISABLED);
+	bool wake = desc->wake_depth;
 	int gpio;
 	struct nmk_gpio_chip *nmk_chip;
 	unsigned long flags;
@@ -186,7 +443,10 @@ static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
 	spin_lock_irqsave(&nmk_chip->lock, flags);
 
 	if (enabled)
-		__nmk_gpio_irq_modify(nmk_chip, gpio, false);
+		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false);
+
+	if (wake)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false);
 
 	nmk_chip->edge_rising &= ~bitmask;
 	if (type & IRQ_TYPE_EDGE_RISING)
@@ -197,7 +457,10 @@ static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
 		nmk_chip->edge_falling |= bitmask;
 
 	if (enabled)
-		__nmk_gpio_irq_modify(nmk_chip, gpio, true);
+		__nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true);
+
+	if (wake)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true);
 
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
 
@@ -210,6 +473,7 @@ static struct irq_chip nmk_gpio_irq_chip = {
 	.mask		= nmk_gpio_irq_mask,
 	.unmask		= nmk_gpio_irq_unmask,
 	.set_type	= nmk_gpio_irq_set_type,
+	.set_wake	= nmk_gpio_irq_set_wake,
 };
 
 static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
@@ -266,36 +530,41 @@ static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
-static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
-				int val)
+static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct nmk_gpio_chip *nmk_chip =
 		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
 
-	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
-	return 0;
+	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
 }
 
-static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
+static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+				int val)
 {
 	struct nmk_gpio_chip *nmk_chip =
 		container_of(chip, struct nmk_gpio_chip, chip);
-	u32 bit = 1 << offset;
 
-	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+	__nmk_gpio_set_output(nmk_chip, offset, val);
 }
 
-static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
 				int val)
 {
 	struct nmk_gpio_chip *nmk_chip =
 		container_of(chip, struct nmk_gpio_chip, chip);
-	u32 bit = 1 << offset;
 
-	if (val)
-		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
-	else
-		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+	__nmk_gpio_make_output(nmk_chip, offset, val);
+
+	return 0;
+}
+
+static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset;
 }
 
 /* This structure is replicated for each GPIO block allocated at probe time */
@@ -304,11 +573,12 @@ static struct gpio_chip nmk_gpio_template = {
 	.get			= nmk_gpio_get_input,
 	.direction_output	= nmk_gpio_make_output,
 	.set			= nmk_gpio_set_output,
+	.to_irq			= nmk_gpio_to_irq,
 	.ngpio			= NMK_GPIO_PER_CHIP,
 	.can_sleep		= 0,
 };
 
-static int __init nmk_gpio_probe(struct platform_device *dev)
+static int __devinit nmk_gpio_probe(struct platform_device *dev)
 {
 	struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
 	struct nmk_gpio_chip *nmk_chip;
@@ -393,30 +663,12 @@ out:
 	return ret;
 }
 
-static int __exit nmk_gpio_remove(struct platform_device *dev)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	struct resource *res;
-
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-
-	nmk_chip = platform_get_drvdata(dev);
-	gpiochip_remove(&nmk_chip->chip);
-	clk_disable(nmk_chip->clk);
-	clk_put(nmk_chip->clk);
-	kfree(nmk_chip);
-	release_mem_region(res->start, resource_size(res));
-	return 0;
-}
-
-
 static struct platform_driver nmk_gpio_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "gpio",
 		},
 	.probe = nmk_gpio_probe,
-	.remove = __exit_p(nmk_gpio_remove),
 	.suspend = NULL, /* to be done */
 	.resume = NULL,
 };
@@ -426,7 +678,7 @@ static int __init nmk_gpio_init(void)
 	return platform_driver_register(&nmk_gpio_driver);
 }
 
-arch_initcall(nmk_gpio_init);
+core_initcall(nmk_gpio_init);
 
 MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
 MODULE_DESCRIPTION("Nomadik GPIO Driver");
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index 4200811249ca..67b113d639d8 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -55,6 +55,23 @@
 #define NMK_GPIO_ALT_B	2
 #define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
 
+/* Pull up/down values */
+enum nmk_gpio_pull {
+	NMK_GPIO_PULL_NONE,
+	NMK_GPIO_PULL_UP,
+	NMK_GPIO_PULL_DOWN,
+};
+
+/* Sleep mode */
+enum nmk_gpio_slpm {
+	NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
+	NMK_GPIO_SLPM_NOCHANGE,
+	NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
+};
+
+extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
+extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull);
 extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
 extern int nmk_gpio_get_mode(int gpio);
 
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 42c907258b14..65704a3d4241 100644
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,6 +1,12 @@
 #ifndef __PLAT_MTU_H
 #define __PLAT_MTU_H
 
+/*
+ * Guaranteed runtime conversion range in seconds for
+ * the clocksource and clockevent.
+ */
+#define MTU_MIN_RANGE 4
+
 /* should be set by the platform code */
 extern void __iomem *mtu_base;
 
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
new file mode 100644
index 000000000000..8c5ae3f2acf8
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ *
+ * Based on arch/arm/mach-pxa/include/mach/mfp.h:
+ *   Copyright (C) 2007 Marvell International Ltd.
+ *   eric miao <eric.miao@marvell.com>
+ */
+
+#ifndef __PLAT_PINCFG_H
+#define __PLAT_PINCFG_H
+
+/*
+ * pin configurations are represented by 32-bit integers:
+ *
+ *	bit  0.. 8 - Pin Number (512 Pins Maximum)
+ *	bit  9..10 - Alternate Function Selection
+ *	bit 11..12 - Pull up/down state
+ *	bit     13 - Sleep mode behaviour
+ *	bit     14 - (sleep mode) Direction
+ *	bit     15 - (sleep mode) Value (if output)
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * PIN_CFG_DEFAULT - default config (0):
+ *		     pull up/down = disabled
+ *		     sleep mode = input/wakeup
+ *		     (sleep mode) direction = input
+ *		     (sleep mode) value = low
+ *
+ * PIN_CFG	   - default config with alternate function
+ * PIN_CFG_PULL	   - default config with alternate function and pull up/down
+ */
+
+typedef unsigned long pin_cfg_t;
+
+#define PIN_NUM_MASK		0x1ff
+#define PIN_NUM(x)		((x) & PIN_NUM_MASK)
+
+#define PIN_ALT_SHIFT		9
+#define PIN_ALT_MASK		(0x3 << PIN_ALT_SHIFT)
+#define PIN_ALT(x)		(((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
+#define PIN_GPIO		(NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
+#define PIN_ALT_A		(NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
+#define PIN_ALT_B		(NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
+#define PIN_ALT_C		(NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
+
+#define PIN_PULL_SHIFT		11
+#define PIN_PULL_MASK		(0x3 << PIN_PULL_SHIFT)
+#define PIN_PULL(x)		(((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
+#define PIN_PULL_NONE		(NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
+#define PIN_PULL_UP		(NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
+#define PIN_PULL_DOWN		(NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
+
+#define PIN_SLPM_SHIFT		13
+#define PIN_SLPM_MASK		(0x1 << PIN_SLPM_SHIFT)
+#define PIN_SLPM(x)		(((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
+#define PIN_SLPM_MAKE_INPUT	(NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
+#define PIN_SLPM_NOCHANGE	(NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+/* These two replace the above in DB8500v2+ */
+#define PIN_SLPM_WAKEUP_ENABLE	(NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_WAKEUP_DISABLE	(NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
+
+#define PIN_DIR_SHIFT		14
+#define PIN_DIR_MASK		(0x1 << PIN_DIR_SHIFT)
+#define PIN_DIR(x)		(((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
+#define PIN_DIR_INPUT		(0 << PIN_DIR_SHIFT)
+#define PIN_DIR_OUTPUT		(1 << PIN_DIR_SHIFT)
+
+#define PIN_VAL_SHIFT		15
+#define PIN_VAL_MASK		(0x1 << PIN_VAL_SHIFT)
+#define PIN_VAL(x)		(((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
+#define PIN_VAL_LOW		(0 << PIN_VAL_SHIFT)
+#define PIN_VAL_HIGH		(1 << PIN_VAL_SHIFT)
+
+/* Shortcuts.  Use these instead of separate DIR and VAL.  */
+#define PIN_INPUT		PIN_DIR_INPUT
+#define PIN_OUTPUT_LOW		(PIN_DIR_OUTPUT | PIN_VAL_LOW)
+#define PIN_OUTPUT_HIGH		(PIN_DIR_OUTPUT | PIN_VAL_HIGH)
+
+/*
+ * These are the same as the ones above, but should make more sense to the
+ * reader when seen along with a setting a pin to AF mode.
+ */
+#define PIN_SLPM_INPUT		PIN_INPUT
+#define PIN_SLPM_OUTPUT_LOW	PIN_OUTPUT_LOW
+#define PIN_SLPM_OUTPUT_HIGH	PIN_OUTPUT_HIGH
+
+#define PIN_CFG_DEFAULT		(PIN_PULL_NONE | PIN_SLPM_INPUT)
+
+#define PIN_CFG(num, alt)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt))
+
+#define PIN_CFG_PULL(num, alt, pull)	\
+	((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
+	 (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
+
+extern int nmk_config_pin(pin_cfg_t cfg);
+extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
+
+#endif
diff --git a/arch/arm/plat-nomadik/include/plat/ske.h b/arch/arm/plat-nomadik/include/plat/ske.h
new file mode 100644
index 000000000000..31382fbc07dc
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/ske.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
+ *
+ * ux500 Scroll key and Keypad Encoder (SKE) header
+ */
+
+#ifndef __SKE_H
+#define __SKE_H
+
+#include <linux/input/matrix_keypad.h>
+
+/* register definitions for SKE peripheral */
+#define SKE_CR		0x00
+#define SKE_VAL0	0x04
+#define SKE_VAL1	0x08
+#define SKE_DBCR	0x0C
+#define SKE_IMSC	0x10
+#define SKE_RIS		0x14
+#define SKE_MIS		0x18
+#define SKE_ICR		0x1C
+
+/*
+ * Keypad module
+ */
+
+/**
+ * struct keypad_platform_data - structure for platform specific data
+ * @init:	pointer to keypad init function
+ * @exit:	pointer to keypad deinitialisation function
+ * @keymap_data: matrix scan code table for keycodes
+ * @krow:	maximum number of rows
+ * @kcol:	maximum number of columns
+ * @debounce_ms: platform specific debounce time
+ * @no_autorepeat: flag for auto repetition
+ * @wakeup_enable: allow waking up the system
+ */
+struct ske_keypad_platform_data {
+	int (*init)(void);
+	int (*exit)(void);
+	const struct matrix_keymap_data *keymap_data;
+	u8 krow;
+	u8 kcol;
+	u8 debounce_ms;
+	bool no_autorepeat;
+	bool wakeup_enable;
+};
+#endif	/*__SKE_KPD_H*/
diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
index 4d12ea4ca361..74b62f10d07f 100644
--- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h
+++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
@@ -1,10 +1,8 @@
 /*
- * arch/arm/plat-nomadik/include/plat/ste_dma40.h
- *
- * Copyright (C) ST-Ericsson 2007-2010
+ * Copyright (C) ST-Ericsson SA 2007-2010
+ * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
  * License terms: GNU General Public License (GPL) version 2
- * Author: Per Friden <per.friden@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
  */
 
 
@@ -14,43 +12,25 @@
 #include <linux/dmaengine.h>
 #include <linux/workqueue.h>
 #include <linux/interrupt.h>
-#include <linux/dmaengine.h>
 
 /* dev types for memcpy */
 #define STEDMA40_DEV_DST_MEMORY (-1)
 #define	STEDMA40_DEV_SRC_MEMORY (-1)
 
-/*
- * Description of bitfields of channel_type variable is available in
- * the info structure.
- */
+enum stedma40_mode {
+	STEDMA40_MODE_LOGICAL = 0,
+	STEDMA40_MODE_PHYSICAL,
+	STEDMA40_MODE_OPERATION,
+};
 
-/* Priority */
-#define STEDMA40_INFO_PRIO_TYPE_POS 2
-#define STEDMA40_HIGH_PRIORITY_CHANNEL (0x1 << STEDMA40_INFO_PRIO_TYPE_POS)
-#define STEDMA40_LOW_PRIORITY_CHANNEL (0x2 << STEDMA40_INFO_PRIO_TYPE_POS)
-
-/* Mode  */
-#define STEDMA40_INFO_CH_MODE_TYPE_POS 6
-#define STEDMA40_CHANNEL_IN_PHY_MODE (0x1 << STEDMA40_INFO_CH_MODE_TYPE_POS)
-#define STEDMA40_CHANNEL_IN_LOG_MODE (0x2 << STEDMA40_INFO_CH_MODE_TYPE_POS)
-#define STEDMA40_CHANNEL_IN_OPER_MODE (0x3 << STEDMA40_INFO_CH_MODE_TYPE_POS)
-
-/* Mode options */
-#define STEDMA40_INFO_CH_MODE_OPT_POS 8
-#define STEDMA40_PCHAN_BASIC_MODE (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
-#define STEDMA40_PCHAN_MODULO_MODE (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
-#define STEDMA40_PCHAN_DOUBLE_DST_MODE (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
-#define STEDMA40_LCHAN_SRC_PHY_DST_LOG (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
-#define STEDMA40_LCHAN_SRC_LOG_DST_PHS (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
-#define STEDMA40_LCHAN_SRC_LOG_DST_LOG (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
-
-/* Interrupt */
-#define STEDMA40_INFO_TIM_POS 10
-#define STEDMA40_NO_TIM_FOR_LINK (0x0 << STEDMA40_INFO_TIM_POS)
-#define STEDMA40_TIM_FOR_LINK (0x1 << STEDMA40_INFO_TIM_POS)
-
-/* End of channel_type configuration */
+enum stedma40_mode_opt {
+	STEDMA40_PCHAN_BASIC_MODE = 0,
+	STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0,
+	STEDMA40_PCHAN_MODULO_MODE,
+	STEDMA40_PCHAN_DOUBLE_DST_MODE,
+	STEDMA40_LCHAN_SRC_PHY_DST_LOG,
+	STEDMA40_LCHAN_SRC_LOG_DST_PHY,
+};
 
 #define STEDMA40_ESIZE_8_BIT  0x0
 #define STEDMA40_ESIZE_16_BIT 0x1
@@ -73,16 +53,14 @@
 #define STEDMA40_PSIZE_LOG_8  STEDMA40_PSIZE_PHY_8
 #define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
 
+/* Maximum number of possible physical channels */
+#define STEDMA40_MAX_PHYS 32
+
 enum stedma40_flow_ctrl {
 	STEDMA40_NO_FLOW_CTRL,
 	STEDMA40_FLOW_CTRL,
 };
 
-enum stedma40_endianess {
-	STEDMA40_LITTLE_ENDIAN,
-	STEDMA40_BIG_ENDIAN
-};
-
 enum stedma40_periph_data_width {
 	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
 	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
@@ -90,15 +68,8 @@ enum stedma40_periph_data_width {
 	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
 };
 
-struct stedma40_half_channel_info {
-	enum stedma40_endianess endianess;
-	enum stedma40_periph_data_width data_width;
-	int psize;
-	enum stedma40_flow_ctrl flow_ctrl;
-};
-
 enum stedma40_xfer_dir {
-	STEDMA40_MEM_TO_MEM,
+	STEDMA40_MEM_TO_MEM = 1,
 	STEDMA40_MEM_TO_PERIPH,
 	STEDMA40_PERIPH_TO_MEM,
 	STEDMA40_PERIPH_TO_PERIPH
@@ -106,18 +77,31 @@ enum stedma40_xfer_dir {
 
 
 /**
+ * struct stedma40_chan_cfg - dst/src channel configuration
+ *
+ * @big_endian: true if the src/dst should be read as big endian
+ * @data_width: Data width of the src/dst hardware
+ * @p_size: Burst size
+ * @flow_ctrl: Flow control on/off.
+ */
+struct stedma40_half_channel_info {
+	bool big_endian;
+	enum stedma40_periph_data_width data_width;
+	int psize;
+	enum stedma40_flow_ctrl flow_ctrl;
+};
+
+/**
  * struct stedma40_chan_cfg - Structure to be filled by client drivers.
  *
  * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
- * @channel_type: priority, mode, mode options and interrupt configuration.
+ * @high_priority: true if high-priority
+ * @mode: channel mode: physical, logical, or operation
+ * @mode_opt: options for the chosen channel mode
  * @src_dev_type: Src device type
  * @dst_dev_type: Dst device type
  * @src_info: Parameters for dst half channel
  * @dst_info: Parameters for dst half channel
- * @pre_transfer_data: Data to be passed on to the pre_transfer() function.
- * @pre_transfer: Callback used if needed before preparation of transfer.
- * Only called if device is set. size of bytes to transfer
- * (in case of multiple element transfer size is size of the first element).
  *
  *
  * This structure has to be filled by the client drivers.
@@ -126,15 +110,13 @@ enum stedma40_xfer_dir {
  */
 struct stedma40_chan_cfg {
 	enum stedma40_xfer_dir			 dir;
-	unsigned int				 channel_type;
+	bool					 high_priority;
+	enum stedma40_mode			 mode;
+	enum stedma40_mode_opt			 mode_opt;
 	int					 src_dev_type;
 	int					 dst_dev_type;
 	struct stedma40_half_channel_info	 src_info;
 	struct stedma40_half_channel_info	 dst_info;
-	void					*pre_transfer_data;
-	int (*pre_transfer)			(struct dma_chan *chan,
-						 void *data,
-						 int size);
 };
 
 /**
@@ -147,8 +129,8 @@ struct stedma40_chan_cfg {
  * @memcpy_len: length of memcpy
  * @memcpy_conf_phy: default configuration of physical channel memcpy
  * @memcpy_conf_log: default configuration of logical channel memcpy
- * @llis_per_log: number of max linked list items per logical channel
- *
+ * @disabled_channels: A vector, ending with -1, that marks physical channels
+ * that are for different reasons not available for the driver.
  */
 struct stedma40_platform_data {
 	u32				 dev_len;
@@ -158,22 +140,10 @@ struct stedma40_platform_data {
 	u32				 memcpy_len;
 	struct stedma40_chan_cfg	*memcpy_conf_phy;
 	struct stedma40_chan_cfg	*memcpy_conf_log;
-	unsigned int			 llis_per_log;
+	int				 disabled_channels[STEDMA40_MAX_PHYS];
 };
 
-/**
- * setdma40_set_psize() - Used for changing the package size of an
- * already configured dma channel.
- *
- * @chan: dmaengine handle
- * @src_psize: new package side for src. (STEDMA40_PSIZE*)
- * @src_psize: new package side for dst. (STEDMA40_PSIZE*)
- *
- * returns 0 on ok, otherwise negative error number.
- */
-int stedma40_set_psize(struct dma_chan *chan,
-		       int src_psize,
-		       int dst_psize);
+#ifdef CONFIG_STE_DMA40
 
 /**
  * stedma40_filter() - Provides stedma40_chan_cfg to the
@@ -236,4 +206,21 @@ dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
 						  direction, flags);
 }
 
+#else
+static inline bool stedma40_filter(struct dma_chan *chan, void *data)
+{
+	return false;
+}
+
+static inline struct
+dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
+					    dma_addr_t addr,
+					    unsigned int size,
+					    enum dma_data_direction direction,
+					    unsigned long flags)
+{
+	return NULL;
+}
+#endif
+
 #endif
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 08aaa4a7f65f..aedf9c1d645e 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-nomadik/timer.c
+ *  linux/arch/arm/plat-nomadik/timer.c
  *
  * Copyright (C) 2008 STMicroelectronics
  * Copyright (C) 2010 Alessandro Rubini
@@ -42,7 +42,6 @@ static struct clocksource nmdk_clksrc = {
 	.rating		= 200,
 	.read		= nmdk_read_timer_dummy,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -76,12 +75,18 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
 		cr = readl(mtu_base + MTU_CR(1));
 		writel(0, mtu_base + MTU_LR(1));
 		writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
-		writel(0x2, mtu_base + MTU_IMSC);
+		writel(1 << 1, mtu_base + MTU_IMSC);
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
 		/* disable irq */
 		writel(0, mtu_base + MTU_IMSC);
+		/* disable timer */
+		cr = readl(mtu_base + MTU_CR(1));
+		cr &= ~MTU_CRn_ENA;
+		writel(cr, mtu_base + MTU_CR(1));
+		/* load some high default value */
+		writel(0xffffffff, mtu_base + MTU_LR(1));
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		break;
@@ -98,7 +103,6 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
 static struct clock_event_device nmdk_clkevt = {
 	.name		= "mtu_1",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 200,
 	.set_mode	= nmdk_clkevt_mode,
 	.set_next_event	= nmdk_clkevt_next,
@@ -127,30 +131,29 @@ void __init nmdk_timer_init(void)
 {
 	unsigned long rate;
 	struct clk *clk0;
-	struct clk *clk1;
-	u32 cr;
+	u32 cr = MTU_CRn_32BITS;
 
 	clk0 = clk_get_sys("mtu0", NULL);
 	BUG_ON(IS_ERR(clk0));
 
-	clk1 = clk_get_sys("mtu1", NULL);
-	BUG_ON(IS_ERR(clk1));
-
 	clk_enable(clk0);
-	clk_enable(clk1);
 
 	/*
-	 * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
-	 * use a divide-by-16 counter if it's more than 16MHz
+	 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
+	 * for ux500.
+	 * Use a divide-by-16 counter if the tick rate is more than 32MHz.
+	 * At 32 MHz, the timer (with 32 bit counter) can be programmed
+	 * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
+	 * with 16 gives too low timer resolution.
 	 */
-	cr = MTU_CRn_32BITS;;
 	rate = clk_get_rate(clk0);
-	if (rate > 16 << 20) {
+	if (rate > 32000000) {
 		rate /= 16;
 		cr |= MTU_CRn_PRESCALE_16;
 	} else {
 		cr |= MTU_CRn_PRESCALE_1;
 	}
+	clocksource_calc_mult_shift(&nmdk_clksrc, rate, MTU_MIN_RANGE);
 
 	/* Timer 0 is the free running clocksource */
 	writel(cr, mtu_base + MTU_CR(0));
@@ -158,7 +161,6 @@ void __init nmdk_timer_init(void)
 	writel(0, mtu_base + MTU_BGLR(0));
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 
-	nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
 	/* Now the scheduling clock is ready */
 	nmdk_clksrc.read = nmdk_read_timer;
 
@@ -166,17 +168,12 @@ void __init nmdk_timer_init(void)
 		pr_err("timer: failed to initialize clock source %s\n",
 		       nmdk_clksrc.name);
 
-	/* Timer 1 is used for events, fix according to rate */
-	cr = MTU_CRn_32BITS;
-	rate = clk_get_rate(clk1);
-	if (rate > 16 << 20) {
-		rate /= 16;
-		cr |= MTU_CRn_PRESCALE_16;
-	} else {
-		cr |= MTU_CRn_PRESCALE_1;
-	}
+	/* Timer 1 is used for events */
+
+	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
+
 	writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
-	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+
 	nmdk_clkevt.max_delta_ns =
 		clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
 	nmdk_clkevt.min_delta_ns =
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 78b49a626d06..92c5bb7909f5 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_OMAP
 
-menu "TI OMAP Implementations"
+menu "TI OMAP Common Features"
 
 config ARCH_OMAP_OTG
 	bool
@@ -19,25 +19,7 @@ config ARCH_OMAP2PLUS
 	bool "TI OMAP2/3/4"
 	select COMMON_CLKDEV
 	help
-	  "Systems based on omap24xx, omap34xx or omap44xx"
-
-config ARCH_OMAP2
-	bool "TI OMAP2"
-	depends on ARCH_OMAP2PLUS
-	select CPU_V6
-
-config ARCH_OMAP3
-	bool "TI OMAP3"
-	depends on ARCH_OMAP2PLUS
-	select CPU_V7
-	select USB_ARCH_HAS_EHCI
-	select ARM_L1_CACHE_SHIFT_6
-
-config ARCH_OMAP4
-	bool "TI OMAP4"
-	depends on ARCH_OMAP2PLUS
-	select CPU_V7
-	select ARM_GIC
+	  "Systems based on OMAP2, OMAP3 or OMAP4"
 
 endchoice
 
@@ -51,7 +33,7 @@ config OMAP_DEBUG_DEVICES
 config OMAP_DEBUG_LEDS
 	bool
 	depends on OMAP_DEBUG_DEVICES
-	default y if LEDS || LEDS_OMAP_DEBUG
+	default y if LEDS_CLASS
 
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
@@ -106,6 +88,15 @@ config OMAP_MBOX_FWK
 	  Say Y here if you want to use OMAP Mailbox framework support for
 	  DSP, IVA1.0 and IVA2 in OMAP1/2/3.
 
+config OMAP_MBOX_KFIFO_SIZE
+	int "Mailbox kfifo default buffer size (bytes)"
+	depends on OMAP_MBOX_FWK
+	default 256
+	help
+	  Specify the default size of mailbox's kfifo buffers (bytes).
+	  This can also be changed at runtime (via the mbox_kfifo_size
+	  module parameter).
+
 config OMAP_IOMMU
 	tristate
 
@@ -120,7 +111,7 @@ config OMAP_IOMMU_DEBUG
 
 choice
 	prompt "System timer"
-	default OMAP_MPU_TIMER
+	default OMAP_32K_TIMER if !ARCH_OMAP15XX
 
 config OMAP_MPU_TIMER
 	bool "Use mpu timer"
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 98f01910c2cf..a4a12859fdd5 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
-	 usb.o fb.o io.o
+	 usb.o fb.o io.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 # omap_device support (OMAP2+ only at the moment)
 obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
 obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
@@ -30,4 +31,4 @@ obj-y += $(i2c-omap-m) $(i2c-omap-y)
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
 
-obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
-\ No newline at end of file
+obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 7190cbd92620..fc62fb5fc20b 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -60,7 +60,7 @@ void clk_disable(struct clk *clk)
 
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (clk->usecount == 0) {
-		printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
+		pr_err("Trying disable clock %s with 0 usecount\n",
 		       clk->name);
 		WARN_ON(1);
 		goto out;
@@ -397,6 +397,7 @@ static int __init clk_disable_unused(void)
 	struct clk *ck;
 	unsigned long flags;
 
+	pr_info("clock: disabling unused clocks to save power\n");
 	list_for_each_entry(ck, &clocks, node) {
 		if (ck->ops == &clkops_null)
 			continue;
@@ -418,7 +419,7 @@ late_initcall(clk_disable_unused);
 int __init clk_init(struct clk_functions * custom_clocks)
 {
 	if (!custom_clocks) {
-		printk(KERN_ERR "No custom clock functions registered\n");
+		pr_err("No custom clock functions registered\n");
 		BUG();
 	}
 
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 219c01e82bc5..f04731820301 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -11,36 +11,16 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/console.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/clk.h>
 #include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
+#include <linux/omapfb.h>
 
 #include <plat/common.h>
 #include <plat/board.h>
-#include <plat/control.h>
-#include <plat/mux.h>
-#include <plat/fpga.h>
-#include <plat/serial.h>
-
-#include <plat/clock.h>
+#include <plat/vram.h>
+#include <plat/dsp.h>
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-# include "../mach-omap2/sdrc.h"
-#endif
 
 #define NO_LENGTH_CHECK 0xffffffff
 
@@ -81,269 +61,9 @@ const void *omap_get_var_config(u16 tag, size_t *len)
 }
 EXPORT_SYMBOL(omap_get_var_config);
 
-/*
- * 32KHz clocksource ... always available, on pretty most chips except
- * OMAP 730 and 1510.  Other timers could be used as clocksources, with
- * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
- * but systems won't necessarily want to spend resources that way.
- */
-
-#define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
-
-#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
-
-#include <linux/clocksource.h>
-
-/*
- * offset_32k holds the init time counter value. It is then subtracted
- * from every counter read to achieve a counter that counts time from the
- * kernel boot (needed for sched_clock()).
- */
-static u32 offset_32k __read_mostly;
-
-#ifdef CONFIG_ARCH_OMAP16XX
-static cycle_t omap16xx_32k_read(struct clocksource *cs)
-{
-	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
-}
-#else
-#define omap16xx_32k_read	NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2420
-static cycle_t omap2420_32k_read(struct clocksource *cs)
-{
-	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap2420_32k_read	NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2430
-static cycle_t omap2430_32k_read(struct clocksource *cs)
-{
-	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap2430_32k_read	NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-static cycle_t omap34xx_32k_read(struct clocksource *cs)
-{
-	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap34xx_32k_read	NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-static cycle_t omap44xx_32k_read(struct clocksource *cs)
+void __init omap_reserve(void)
 {
-	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap44xx_32k_read	NULL
-#endif
-
-/*
- * Kernel assumes that sched_clock can be called early but may not have
- * things ready yet.
- */
-static cycle_t omap_32k_read_dummy(struct clocksource *cs)
-{
-	return 0;
-}
-
-static struct clocksource clocksource_32k = {
-	.name		= "32k_counter",
-	.rating		= 250,
-	.read		= omap_32k_read_dummy,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 10,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * Returns current time from boot in nsecs. It's OK for this to wrap
- * around for now, as it's just a relative time stamp.
- */
-unsigned long long sched_clock(void)
-{
-	return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
-				  clocksource_32k.mult, clocksource_32k.shift);
-}
-
-/**
- * read_persistent_clock -  Return time from a persistent clock.
- *
- * Reads the time from a source which isn't disabled during PM, the
- * 32k sync timer.  Convert the cycles elapsed since last read into
- * nsecs and adds to a monotonically increasing timespec.
- */
-static struct timespec persistent_ts;
-static cycles_t cycles, last_cycles;
-void read_persistent_clock(struct timespec *ts)
-{
-	unsigned long long nsecs;
-	cycles_t delta;
-	struct timespec *tsp = &persistent_ts;
-
-	last_cycles = cycles;
-	cycles = clocksource_32k.read(&clocksource_32k);
-	delta = cycles - last_cycles;
-
-	nsecs = clocksource_cyc2ns(delta,
-				   clocksource_32k.mult, clocksource_32k.shift);
-
-	timespec_add_ns(tsp, nsecs);
-	*ts = *tsp;
+	omapfb_reserve_sdram_memblock();
+	omap_vram_reserve_sdram_memblock();
+	omap_dsp_reserve_sdram_memblock();
 }
-
-static int __init omap_init_clocksource_32k(void)
-{
-	static char err[] __initdata = KERN_ERR
-			"%s: can't register clocksource!\n";
-
-	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
-		struct clk *sync_32k_ick;
-
-		if (cpu_is_omap16xx())
-			clocksource_32k.read = omap16xx_32k_read;
-		else if (cpu_is_omap2420())
-			clocksource_32k.read = omap2420_32k_read;
-		else if (cpu_is_omap2430())
-			clocksource_32k.read = omap2430_32k_read;
-		else if (cpu_is_omap34xx())
-			clocksource_32k.read = omap34xx_32k_read;
-		else if (cpu_is_omap44xx())
-			clocksource_32k.read = omap44xx_32k_read;
-		else
-			return -ENODEV;
-
-		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
-		if (sync_32k_ick)
-			clk_enable(sync_32k_ick);
-
-		clocksource_32k.mult = clocksource_hz2mult(32768,
-					    clocksource_32k.shift);
-
-		offset_32k = clocksource_32k.read(&clocksource_32k);
-
-		if (clocksource_register(&clocksource_32k))
-			printk(err, clocksource_32k.name);
-	}
-	return 0;
-}
-arch_initcall(omap_init_clocksource_32k);
-
-#endif	/* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
-
-/* Global address base setup code */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
-static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
-{
-	omap2_set_globals_tap(omap2_globals);
-	omap2_set_globals_sdrc(omap2_globals);
-	omap2_set_globals_control(omap2_globals);
-	omap2_set_globals_prcm(omap2_globals);
-	omap2_set_globals_uart(omap2_globals);
-}
-
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2420)
-
-static struct omap_globals omap242x_globals = {
-	.class	= OMAP242X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2420_SDRC_BASE,
-	.sms	= OMAP2420_SMS_BASE,
-	.ctrl	= OMAP2420_CTRL_BASE,
-	.prm	= OMAP2420_PRM_BASE,
-	.cm	= OMAP2420_CM_BASE,
-	.uart1_phys	= OMAP2_UART1_BASE,
-	.uart2_phys	= OMAP2_UART2_BASE,
-	.uart3_phys	= OMAP2_UART3_BASE,
-};
-
-void __init omap2_set_globals_242x(void)
-{
-	__omap2_set_globals(&omap242x_globals);
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2430)
-
-static struct omap_globals omap243x_globals = {
-	.class	= OMAP243X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP243X_SDRC_BASE,
-	.sms	= OMAP243X_SMS_BASE,
-	.ctrl	= OMAP243X_CTRL_BASE,
-	.prm	= OMAP2430_PRM_BASE,
-	.cm	= OMAP2430_CM_BASE,
-	.uart1_phys	= OMAP2_UART1_BASE,
-	.uart2_phys	= OMAP2_UART2_BASE,
-	.uart3_phys	= OMAP2_UART3_BASE,
-};
-
-void __init omap2_set_globals_243x(void)
-{
-	__omap2_set_globals(&omap243x_globals);
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct omap_globals omap3_globals = {
-	.class	= OMAP343X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP343X_SDRC_BASE,
-	.sms	= OMAP343X_SMS_BASE,
-	.ctrl	= OMAP343X_CTRL_BASE,
-	.prm	= OMAP3430_PRM_BASE,
-	.cm	= OMAP3430_CM_BASE,
-	.uart1_phys	= OMAP3_UART1_BASE,
-	.uart2_phys	= OMAP3_UART2_BASE,
-	.uart3_phys	= OMAP3_UART3_BASE,
-};
-
-void __init omap2_set_globals_343x(void)
-{
-	__omap2_set_globals(&omap3_globals);
-}
-
-void __init omap2_set_globals_36xx(void)
-{
-	omap3_globals.uart4_phys = OMAP3_UART4_BASE;
-
-	__omap2_set_globals(&omap3_globals);
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4)
-static struct omap_globals omap4_globals = {
-	.class	= OMAP443X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-	.ctrl	= OMAP443X_CTRL_BASE,
-	.prm	= OMAP4430_PRM_BASE,
-	.cm	= OMAP4430_CM_BASE,
-	.cm2	= OMAP4430_CM2_BASE,
-	.uart1_phys	= OMAP4_UART1_BASE,
-	.uart2_phys	= OMAP4_UART2_BASE,
-	.uart3_phys	= OMAP4_UART3_BASE,
-	.uart4_phys	= OMAP4_UART4_BASE,
-};
-
-void __init omap2_set_globals_443x(void)
-{
-	omap2_set_globals_tap(&omap4_globals);
-	omap2_set_globals_control(&omap4_globals);
-	omap2_set_globals_prcm(&omap4_globals);
-	omap2_set_globals_uart(&omap4_globals);
-}
-#endif
-
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
new file mode 100644
index 000000000000..155fe43a672b
--- /dev/null
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -0,0 +1,183 @@
+/*
+ * OMAP 32ksynctimer/counter_32k-related code
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Copyright (C) 2010 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * NOTE: This timer is not the same timer as the old OMAP1 MPU timer.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+
+#include <plat/clock.h>
+
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510.  Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+
+#define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
+
+#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
+
+#include <linux/clocksource.h>
+
+/*
+ * offset_32k holds the init time counter value. It is then subtracted
+ * from every counter read to achieve a counter that counts time from the
+ * kernel boot (needed for sched_clock()).
+ */
+static u32 offset_32k __read_mostly;
+
+#ifdef CONFIG_ARCH_OMAP16XX
+static cycle_t omap16xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
+}
+#else
+#define omap16xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+static cycle_t omap2420_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
+}
+#else
+#define omap2420_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static cycle_t omap2430_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
+}
+#else
+#define omap2430_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static cycle_t omap34xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
+}
+#else
+#define omap34xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
+}
+#else
+#define omap44xx_32k_read	NULL
+#endif
+
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+{
+	return 0;
+}
+
+static struct clocksource clocksource_32k = {
+	.name		= "32k_counter",
+	.rating		= 250,
+	.read		= omap_32k_read_dummy,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 10,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Returns current time from boot in nsecs. It's OK for this to wrap
+ * around for now, as it's just a relative time stamp.
+ */
+unsigned long long sched_clock(void)
+{
+	return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
+				  clocksource_32k.mult, clocksource_32k.shift);
+}
+
+/**
+ * read_persistent_clock -  Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer.  Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ */
+static struct timespec persistent_ts;
+static cycles_t cycles, last_cycles;
+void read_persistent_clock(struct timespec *ts)
+{
+	unsigned long long nsecs;
+	cycles_t delta;
+	struct timespec *tsp = &persistent_ts;
+
+	last_cycles = cycles;
+	cycles = clocksource_32k.read(&clocksource_32k);
+	delta = cycles - last_cycles;
+
+	nsecs = clocksource_cyc2ns(delta,
+				   clocksource_32k.mult, clocksource_32k.shift);
+
+	timespec_add_ns(tsp, nsecs);
+	*ts = *tsp;
+}
+
+static int __init omap_init_clocksource_32k(void)
+{
+	static char err[] __initdata = KERN_ERR
+			"%s: can't register clocksource!\n";
+
+	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
+		struct clk *sync_32k_ick;
+
+		if (cpu_is_omap16xx())
+			clocksource_32k.read = omap16xx_32k_read;
+		else if (cpu_is_omap2420())
+			clocksource_32k.read = omap2420_32k_read;
+		else if (cpu_is_omap2430())
+			clocksource_32k.read = omap2430_32k_read;
+		else if (cpu_is_omap34xx())
+			clocksource_32k.read = omap34xx_32k_read;
+		else if (cpu_is_omap44xx())
+			clocksource_32k.read = omap44xx_32k_read;
+		else
+			return -ENODEV;
+
+		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
+		if (sync_32k_ick)
+			clk_enable(sync_32k_ick);
+
+		clocksource_32k.mult = clocksource_hz2mult(32768,
+					    clocksource_32k.shift);
+
+		offset_32k = clocksource_32k.read(&clocksource_32k);
+
+		if (clocksource_register(&clocksource_32k))
+			printk(err, clocksource_32k.name);
+	}
+	return 0;
+}
+arch_initcall(omap_init_clocksource_32k);
+
+#endif	/* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
+
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 6d3d33360056..11c54ec8d47f 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -40,7 +40,7 @@ static struct clk *mpu_clk;
 
 /* TODO: Add support for SDRAM timing changes */
 
-int omap_verify_speed(struct cpufreq_policy *policy)
+static int omap_verify_speed(struct cpufreq_policy *policy)
 {
 	if (freq_table)
 		return cpufreq_frequency_table_verify(policy, freq_table);
@@ -58,7 +58,7 @@ int omap_verify_speed(struct cpufreq_policy *policy)
 	return 0;
 }
 
-unsigned int omap_getspeed(unsigned int cpu)
+static unsigned int omap_getspeed(unsigned int cpu)
 {
 	unsigned long rate;
 
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 53fcef7c5201..fc05b1022602 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -39,7 +39,7 @@ static struct h2p2_dbg_fpga __iomem	*fpga;
 static u16				led_state, hw_led_state;
 
 
-#ifdef	CONFIG_LEDS_OMAP_DEBUG
+#ifdef	CONFIG_OMAP_DEBUG_LEDS
 #define new_led_api()	1
 #else
 #define new_led_api()	0
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 95677d17cd1c..6f42a18b8aa4 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -15,144 +15,22 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/memblock.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/control.h>
 #include <plat/board.h>
 #include <plat/mmc.h>
-#include <plat/mux.h>
 #include <mach/gpio.h>
 #include <plat/menelaus.h>
 #include <plat/mcbsp.h>
-#include <plat/dsp_common.h>
 #include <plat/omap44xx.h>
 
-#if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-
-static struct dsp_platform_data dsp_pdata = {
-	.kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
-};
-
-static struct resource omap_dsp_resources[] = {
-	{
-		.name	= "dsp_mmu",
-		.start	= -1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device omap_dsp_device = {
-	.name		= "dsp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(omap_dsp_resources),
-	.resource	= omap_dsp_resources,
-	.dev = {
-		.platform_data = &dsp_pdata,
-	},
-};
-
-static inline void omap_init_dsp(void)
-{
-	struct resource *res;
-	int irq;
-
-	if (cpu_is_omap15xx())
-		irq = INT_1510_DSP_MMU;
-	else if (cpu_is_omap16xx())
-		irq = INT_1610_DSP_MMU;
-	else if (cpu_is_omap24xx())
-		irq = INT_24XX_DSP_MMU;
-
-	res = platform_get_resource_byname(&omap_dsp_device,
-					   IORESOURCE_IRQ, "dsp_mmu");
-	res->start = irq;
-
-	platform_device_register(&omap_dsp_device);
-}
-
-int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
-{
-	static DEFINE_MUTEX(dsp_pdata_lock);
-
-	spin_lock_init(&kdev->lock);
-
-	mutex_lock(&dsp_pdata_lock);
-	list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
-	mutex_unlock(&dsp_pdata_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(dsp_kfunc_device_register);
-
-#else
-static inline void omap_init_dsp(void) { }
-#endif	/* CONFIG_OMAP_DSP */
-
 /*-------------------------------------------------------------------------*/
-#if	defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
 
-static void omap_init_kp(void)
-{
-	/* 2430 and 34xx keypad is on TWL4030 */
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
-		return;
-
-	if (machine_is_omap_h2() || machine_is_omap_h3()) {
-		omap_cfg_reg(F18_1610_KBC0);
-		omap_cfg_reg(D20_1610_KBC1);
-		omap_cfg_reg(D19_1610_KBC2);
-		omap_cfg_reg(E18_1610_KBC3);
-		omap_cfg_reg(C21_1610_KBC4);
-
-		omap_cfg_reg(G18_1610_KBR0);
-		omap_cfg_reg(F19_1610_KBR1);
-		omap_cfg_reg(H14_1610_KBR2);
-		omap_cfg_reg(E20_1610_KBR3);
-		omap_cfg_reg(E19_1610_KBR4);
-		omap_cfg_reg(N19_1610_KBR5);
-	} else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
-		omap_cfg_reg(E2_7XX_KBR0);
-		omap_cfg_reg(J7_7XX_KBR1);
-		omap_cfg_reg(E1_7XX_KBR2);
-		omap_cfg_reg(F3_7XX_KBR3);
-		omap_cfg_reg(D2_7XX_KBR4);
-
-		omap_cfg_reg(C2_7XX_KBC0);
-		omap_cfg_reg(D3_7XX_KBC1);
-		omap_cfg_reg(E4_7XX_KBC2);
-		omap_cfg_reg(F4_7XX_KBC3);
-		omap_cfg_reg(E3_7XX_KBC4);
-	} else if (machine_is_omap_h4()) {
-		omap_cfg_reg(T19_24XX_KBR0);
-		omap_cfg_reg(R19_24XX_KBR1);
-		omap_cfg_reg(V18_24XX_KBR2);
-		omap_cfg_reg(M21_24XX_KBR3);
-		omap_cfg_reg(E5__24XX_KBR4);
-		if (omap_has_menelaus()) {
-			omap_cfg_reg(B3__24XX_KBR5);
-			omap_cfg_reg(AA4_24XX_KBC2);
-			omap_cfg_reg(B13_24XX_KBC6);
-		} else {
-			omap_cfg_reg(M18_24XX_KBR5);
-			omap_cfg_reg(H19_24XX_KBC2);
-			omap_cfg_reg(N19_24XX_KBC6);
-		}
-		omap_cfg_reg(R20_24XX_KBC0);
-		omap_cfg_reg(M14_24XX_KBC1);
-		omap_cfg_reg(V17_24XX_KBC3);
-		omap_cfg_reg(P21_24XX_KBC4);
-		omap_cfg_reg(L14_24XX_KBC5);
-	}
-}
-#else
-static inline void omap_init_kp(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
 #if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
 
 static struct platform_device **omap_mcbsp_devices;
@@ -394,6 +272,35 @@ static void omap_init_wdt(void)
 static inline void omap_init_wdt(void) {}
 #endif
 
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+
+static phys_addr_t omap_dsp_phys_mempool_base;
+
+void __init omap_dsp_reserve_sdram_memblock(void)
+{
+	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
+	phys_addr_t paddr;
+
+	if (!size)
+		return;
+
+	paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
+	if (!paddr) {
+		pr_err("%s: failed to reserve %x bytes\n",
+				__func__, size);
+		return;
+	}
+
+	omap_dsp_phys_mempool_base = paddr;
+}
+
+phys_addr_t omap_dsp_get_mempool_base(void)
+{
+	return omap_dsp_phys_mempool_base;
+}
+EXPORT_SYMBOL(omap_dsp_get_mempool_base);
+#endif
+
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -419,12 +326,9 @@ static int __init omap_init_devices(void)
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
-	omap_init_dsp();
-	omap_init_kp();
 	omap_init_rng();
 	omap_init_mcpdm();
 	omap_init_uwire();
-	omap_init_wdt();
 	return 0;
 }
 arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index f7f571e7987e..f5c5b8da9a87 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
@@ -290,7 +291,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 		val = dma_read(CCR(lch));
 
 		/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
-		val &= ~((3 << 19) | 0x1f);
+		val &= ~((1 << 23) | (3 << 19) | 0x1f);
 		val |= (dma_trigger & ~0x1f) << 14;
 		val |= dma_trigger & 0x1f;
 
@@ -304,11 +305,14 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 		else
 			val &= ~(1 << 18);
 
-		if (src_or_dst_synch)
+		if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) {
+			val &= ~(1 << 24);	/* dest synch */
+			val |= (1 << 23);	/* Prefetch */
+		} else if (src_or_dst_synch) {
 			val |= 1 << 24;		/* source synch */
-		else
+		} else {
 			val &= ~(1 << 24);	/* dest synch */
-
+		}
 		dma_write(val, CCR(lch));
 	}
 
@@ -993,11 +997,17 @@ void omap_start_dma(int lch)
 	l = dma_read(CCR(lch));
 
 	/*
-	 * Errata: On ES2.0 BUFFERING disable must be set.
-	 * This will always fail on ES1.0
+	 * Errata: Inter Frame DMA buffering issue (All OMAP2420 and
+	 * OMAP2430ES1.0): DMA will wrongly buffer elements if packing and
+	 * bursting is enabled. This might result in data gets stalled in
+	 * FIFO at the end of the block.
+	 * Workaround: DMA channels must have BUFFERING_DISABLED bit set to
+	 * guarantee no data will stay in the DMA FIFO in case inter frame
+	 * buffering occurs.
 	 */
-	if (cpu_is_omap24xx())
-		l |= OMAP_DMA_CCR_EN;
+	if (cpu_is_omap2420() ||
+	    (cpu_is_omap2430() && (omap_type() == OMAP2430_REV_ES1_0)))
+		l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
 
 	l |= OMAP_DMA_CCR_EN;
 	dma_write(l, CCR(lch));
@@ -1015,8 +1025,39 @@ void omap_stop_dma(int lch)
 		dma_write(0, CICR(lch));
 
 	l = dma_read(CCR(lch));
-	l &= ~OMAP_DMA_CCR_EN;
-	dma_write(l, CCR(lch));
+	/* OMAP3 Errata i541: sDMA FIFO draining does not finish */
+	if (cpu_is_omap34xx() && (l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
+		int i = 0;
+		u32 sys_cf;
+
+		/* Configure No-Standby */
+		l = dma_read(OCP_SYSCONFIG);
+		sys_cf = l;
+		l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK;
+		l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE);
+		dma_write(l , OCP_SYSCONFIG);
+
+		l = dma_read(CCR(lch));
+		l &= ~OMAP_DMA_CCR_EN;
+		dma_write(l, CCR(lch));
+
+		/* Wait for sDMA FIFO drain */
+		l = dma_read(CCR(lch));
+		while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE |
+					OMAP_DMA_CCR_WR_ACTIVE))) {
+			udelay(5);
+			i++;
+			l = dma_read(CCR(lch));
+		}
+		if (i >= 100)
+			printk(KERN_ERR "DMA drain did not complete on "
+					"lch %d\n", lch);
+		/* Restore OCP_SYSCONFIG */
+		dma_write(sys_cf, OCP_SYSCONFIG);
+	} else {
+		l &= ~OMAP_DMA_CCR_EN;
+		dma_write(l, CCR(lch));
+	}
 
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 44bafdab2dce..1d706cf63ca0 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -581,7 +581,7 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 	 * When the functional clock disappears, too quick writes seem
 	 * to cause an abort. XXX Is this still necessary?
 	 */
-	__delay(150000);
+	__delay(300000);
 
 	return ret;
 }
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index d3eea4f47533..c9e5d7298c40 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -26,7 +26,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/bootmem.h>
+#include <linux/memblock.h>
 #include <linux/io.h>
 #include <linux/omapfb.h>
 
@@ -36,6 +36,8 @@
 #include <plat/board.h>
 #include <plat/sram.h>
 
+#include "fb.h"
+
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
 static struct omapfb_platform_data omapfb_config;
@@ -94,7 +96,7 @@ static int fbmem_region_reserved(unsigned long start, size_t size)
  * Get the region_idx`th region from board config/ATAG and convert it to
  * our internal format.
  */
-static int get_fbmem_region(int region_idx, struct omapfb_mem_region *rg)
+static int __init get_fbmem_region(int region_idx, struct omapfb_mem_region *rg)
 {
 	const struct omap_fbmem_config	*conf;
 	u32				paddr;
@@ -126,7 +128,7 @@ static int set_fbmem_region_type(struct omapfb_mem_region *rg, int mem_type,
 	 * type = 0 && paddr = 0, a default don't care case maps to
 	 * the SDRAM type.
 	 */
-	if (rg->type || (!rg->type && !rg->paddr))
+	if (rg->type || !rg->paddr)
 		return 0;
 	if (ranges_overlap(rg->paddr, rg->size, mem_start, mem_size)) {
 		rg->type = mem_type;
@@ -171,49 +173,74 @@ static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg,
 	return 0;
 }
 
+static int valid_sdram(unsigned long addr, unsigned long size)
+{
+	return memblock_is_region_memory(addr, size);
+}
+
+static int reserve_sdram(unsigned long addr, unsigned long size)
+{
+	if (memblock_is_region_reserved(addr, size))
+		return -EBUSY;
+	if (memblock_reserve(addr, size))
+		return -ENOMEM;
+	return 0;
+}
+
 /*
  * Called from map_io. We need to call to this early enough so that we
  * can reserve the fixed SDRAM regions before VM could get hold of them.
  */
-void __init omapfb_reserve_sdram(void)
+void __init omapfb_reserve_sdram_memblock(void)
 {
-	struct bootmem_data	*bdata;
-	unsigned long		sdram_start, sdram_size;
-	unsigned long		reserved;
-	int			i;
+	unsigned long reserved = 0;
+	int i;
 
 	if (config_invalid)
 		return;
 
-	bdata = NODE_DATA(0)->bdata;
-	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
-	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
-	reserved = 0;
 	for (i = 0; ; i++) {
-		struct omapfb_mem_region	rg;
+		struct omapfb_mem_region rg;
 
 		if (get_fbmem_region(i, &rg) < 0)
 			break;
+
 		if (i == OMAPFB_PLANE_NUM) {
-			printk(KERN_ERR
-				"Extraneous FB mem configuration entries\n");
+			pr_err("Extraneous FB mem configuration entries\n");
 			config_invalid = 1;
 			return;
 		}
+
 		/* Check if it's our memory type. */
-		if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SDRAM,
-				          sdram_start, sdram_size) < 0 ||
-		    (rg.type != OMAPFB_MEMTYPE_SDRAM))
+		if (rg.type != OMAPFB_MEMTYPE_SDRAM)
 			continue;
-		BUG_ON(omapfb_config.mem_desc.region[i].size);
-		if (check_fbmem_region(i, &rg, sdram_start, sdram_size) < 0) {
+
+		/* Check if the region falls within SDRAM */
+		if (rg.paddr && !valid_sdram(rg.paddr, rg.size))
+			continue;
+
+		if (rg.size == 0) {
+			pr_err("Zero size for FB region %d\n", i);
 			config_invalid = 1;
 			return;
 		}
+
 		if (rg.paddr) {
-			reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
+			if (reserve_sdram(rg.paddr, rg.size)) {
+				pr_err("Trying to use reserved memory for FB region %d\n",
+					i);
+				config_invalid = 1;
+				return;
+			}
 			reserved += rg.size;
 		}
+
+		if (omapfb_config.mem_desc.region[i].size) {
+			pr_err("FB region %d already set\n", i);
+			config_invalid = 1;
+			return;
+		}
+
 		omapfb_config.mem_desc.region[i] = rg;
 		configured_regions++;
 	}
@@ -233,7 +260,7 @@ void __init omapfb_reserve_sdram(void)
  * this point, since the driver built as a module would have problem with
  * freeing / reallocating the regions.
  */
-unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
 				  unsigned long sram_vstart,
 				  unsigned long sram_size,
 				  unsigned long pstart_avail,
@@ -307,7 +334,7 @@ void omapfb_set_ctrl_platform_data(void *data)
 	omapfb_config.ctrl_platform_data = data;
 }
 
-static inline int omap_init_fb(void)
+static int __init omap_init_fb(void)
 {
 	const struct omap_lcd_config *conf;
 
@@ -352,15 +379,18 @@ void omapfb_set_platform_data(struct omapfb_platform_data *data)
 	omapfb_config = *data;
 }
 
-static inline int omap_init_fb(void)
+static int __init omap_init_fb(void)
 {
 	return platform_device_register(&omap_fb_device);
 }
 
 arch_initcall(omap_init_fb);
 
-void omapfb_reserve_sdram(void) {}
-unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+void omapfb_reserve_sdram_memblock(void)
+{
+}
+
+unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
 				  unsigned long sram_vstart,
 				  unsigned long sram_size,
 				  unsigned long start_avail,
@@ -375,8 +405,11 @@ void omapfb_set_platform_data(struct omapfb_platform_data *data)
 {
 }
 
-void omapfb_reserve_sdram(void) {}
-unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+void omapfb_reserve_sdram_memblock(void)
+{
+}
+
+unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
 				  unsigned long sram_vstart,
 				  unsigned long sram_size,
 				  unsigned long start_avail,
diff --git a/arch/arm/plat-omap/fb.h b/arch/arm/plat-omap/fb.h
new file mode 100644
index 000000000000..d765d0bd8520
--- /dev/null
+++ b/arch/arm/plat-omap/fb.h
@@ -0,0 +1,10 @@
+#ifndef __PLAT_OMAP_FB_H__
+#define __PLAT_OMAP_FB_H__
+
+extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+					 unsigned long sram_vstart,
+					 unsigned long sram_size,
+					 unsigned long pstart_avail,
+					 unsigned long size_avail);
+
+#endif /* __PLAT_OMAP_FB_H__ */
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9b7e3545f325..c05c653d1674 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -390,7 +390,9 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if (cpu_is_omap7xx() && gpio < 192)
 		return 0;
-	if (cpu_is_omap24xx() && gpio < 128)
+	if (cpu_is_omap2420() && gpio < 128)
+		return 0;
+	if (cpu_is_omap2430() && gpio < 160)
 		return 0;
 	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
 		return 0;
@@ -2082,9 +2084,10 @@ void omap2_gpio_prepare_for_idle(int power_state)
 
 	for (i = min; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		u32 l1, l2;
+		u32 l1 = 0, l2 = 0;
+		int j;
 
-		if (bank->dbck_enable_mask)
+		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
 			clk_disable(bank->dbck);
 
 		if (power_state > PWRDM_POWER_OFF)
@@ -2149,9 +2152,10 @@ void omap2_gpio_resume_after_idle(void)
 		min = 1;
 	for (i = min; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		u32 l, gen, gen0, gen1;
+		u32 l = 0, gen, gen0, gen1;
+		int j;
 
-		if (bank->dbck_enable_mask)
+		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
 			clk_enable(bank->dbck);
 
 		if (!workaround_enabled)
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index eec2b4993c69..a5ce4f0aad35 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -138,6 +138,16 @@ static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id)
 	return platform_device_register(pdev);
 }
 
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+	omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
 static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
 {
 	struct resource *res;
@@ -168,7 +178,7 @@ static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
 		struct omap_i2c_bus_platform_data *pd;
 
 		pd = pdev->dev.platform_data;
-		pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat;
+		pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
 	}
 
 	return platform_device_register(pdev);
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 5cd622039da0..3cf4fa25ab3d 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -85,6 +85,14 @@ struct omap_usb_config {
 	 *  6 == 6 wire unidirectional (or TLL)
 	 */
 	u8		pins[3];
+
+	struct platform_device *udc_device;
+	struct platform_device *ohci_device;
+	struct platform_device *otg_device;
+
+	u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+	u32 (*usb1_init)(unsigned nwires);
+	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
 };
 
 struct omap_lcd_config {
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index dfc472ca0cc4..fef4696dcf67 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -19,6 +19,22 @@ struct module;
 struct clk;
 struct clockdomain;
 
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware.  Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
 struct clkops {
 	int			(*enable)(struct clk *);
 	void			(*disable)(struct clk *);
@@ -30,12 +46,45 @@ struct clkops {
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
 
+/* struct clksel_rate.flags possibilities */
+#define RATE_IN_242X		(1 << 0)
+#define RATE_IN_243X		(1 << 1)
+#define RATE_IN_3XXX		(1 << 2)	/* rates common to all OMAP3 */
+#define RATE_IN_3430ES2		(1 << 3)	/* 3430ES2 rates only */
+#define RATE_IN_36XX		(1 << 4)
+#define RATE_IN_4430		(1 << 5)
+
+#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_3430ES2PLUS	(RATE_IN_3430ES2 | RATE_IN_36XX)
+
+/**
+ * struct clksel_rate - register bitfield values corresponding to clk divisors
+ * @val: register bitfield value (shifted to bit 0)
+ * @div: clock divisor corresponding to @val
+ * @flags: (see "struct clksel_rate.flags possibilities" above)
+ *
+ * @val should match the value of a read from struct clk.clksel_reg
+ * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
+ *
+ * @div is the divisor that should be applied to the parent clock's rate
+ * to produce the current clock's rate.
+ *
+ * XXX @flags probably should be replaced with an struct omap_chip.
+ */
 struct clksel_rate {
 	u32			val;
 	u8			div;
 	u8			flags;
 };
 
+/**
+ * struct clksel - available parent clocks, and a pointer to their divisors
+ * @parent: struct clk * to a possible parent clock
+ * @rates: available divisors for this parent clock
+ *
+ * A struct clksel is always associated with one or more struct clks
+ * and one or more struct clksel_rates.
+ */
 struct clksel {
 	struct clk		 *parent;
 	const struct clksel_rate *rates;
@@ -116,6 +165,60 @@ struct dpll_data {
 
 #endif
 
+/* struct clk.flags possibilities */
+#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL	(1 << 1)
+#define CLOCK_NO_IDLE_PARENT	(1 << 2)
+#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
+#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named.  It should be "enable_count" or
+ * something similar.  "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals.  (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
 struct clk {
 	struct list_head	node;
 	const struct clkops	*ops;
@@ -129,8 +232,8 @@ struct clk {
 	int			(*set_rate)(struct clk *, unsigned long);
 	long			(*round_rate)(struct clk *, unsigned long);
 	void			(*init)(struct clk *);
-	__u8			enable_bit;
-	__s8			usecount;
+	u8			enable_bit;
+	s8			usecount;
 	u8			fixed_div;
 	u8			flags;
 #ifdef CONFIG_ARCH_OMAP2PLUS
@@ -141,8 +244,8 @@ struct clk {
 	const char		*clkdm_name;
 	struct clockdomain	*clkdm;
 #else
-	__u8			rate_offset;
-	__u8			src_offset;
+	u8			rate_offset;
+	u8			src_offset;
 #endif
 #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
 	struct dentry		*dent;	/* For visible tree hierarchy */
@@ -188,23 +291,4 @@ extern const struct clkops clkops_null;
 
 extern struct clk dummy_ck;
 
-/* Clock flags */
-#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL	(1 << 1)
-#define CLOCK_NO_IDLE_PARENT	(1 << 2)
-#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
-#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
-
-/* Clksel_rate flags */
-#define RATE_IN_242X		(1 << 0)
-#define RATE_IN_243X		(1 << 1)
-#define RATE_IN_3XXX		(1 << 2)	/* rates common to all OMAP3 */
-#define RATE_IN_3430ES2		(1 << 3)	/* 3430ES2 rates only */
-#define RATE_IN_36XX		(1 << 4)
-#define RATE_IN_4430		(1 << 5)
-
-#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
-
-#define RATE_IN_3430ES2PLUS	(RATE_IN_3430ES2 | RATE_IN_36XX)
-
 #endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index d265018f5e6b..a9d69a09920d 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -34,6 +34,8 @@ struct sys_timer;
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 
+extern void omap_reserve(void);
+
 /*
  * IO bases for various OMAP processors
  * Except the tap base, rest all the io bases
@@ -45,6 +47,7 @@ struct omap_globals {
 	unsigned long   sdrc;           /* SDRAM Controller */
 	unsigned long   sms;            /* SDRAM Memory Scheduler */
 	unsigned long   ctrl;           /* System Control Module */
+	unsigned long   ctrl_pad;	/* PAD Control Module */
 	unsigned long   prm;            /* Power and Reset Management */
 	unsigned long   cm;             /* Clock Management */
 	unsigned long   cm2;
@@ -56,8 +59,7 @@ struct omap_globals {
 
 void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
-void omap2_set_globals_343x(void);
-void omap2_set_globals_36xx(void);
+void omap2_set_globals_3xxx(void);
 void omap2_set_globals_443x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
@@ -65,7 +67,8 @@ void omap2_set_globals_tap(struct omap_globals *);
 void omap2_set_globals_sdrc(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
-void omap2_set_globals_uart(struct omap_globals *);
+
+void omap3_map_io(void);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition
@@ -87,4 +90,9 @@ void omap2_set_globals_uart(struct omap_globals *);
 	}							\
 })
 
+extern struct device *omap2_get_mpuss_device(void);
+extern struct device *omap2_get_iva_device(void);
+extern struct device *omap2_get_l3_device(void);
+extern struct device *omap4_get_dsp_device(void);
+
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 75141742300c..3fd8b4055727 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -66,10 +66,11 @@ unsigned int omap_rev(void);
  * family. This difference can be handled separately.
  */
 #define OMAP_REVBITS_00		0x00
-#define OMAP_REVBITS_10		0x10
-#define OMAP_REVBITS_20		0x20
-#define OMAP_REVBITS_30		0x30
-#define OMAP_REVBITS_40		0x40
+#define OMAP_REVBITS_01		0x01
+#define OMAP_REVBITS_02		0x02
+#define OMAP_REVBITS_03		0x03
+#define OMAP_REVBITS_04		0x04
+#define OMAP_REVBITS_05		0x05
 
 /*
  * Get the CPU revision for OMAP devices
@@ -361,21 +362,24 @@ IS_OMAP_TYPE(3517, 0x3517)
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
-#define OMAP2420_REV_ES1_0	0x24200024
-#define OMAP2420_REV_ES2_0	0x24201024
+#define OMAP2420_REV_ES1_0	OMAP242X_CLASS
+#define OMAP2420_REV_ES2_0	(OMAP242X_CLASS | (OMAP_REVBITS_01 << 8))
 
 #define OMAP243X_CLASS		0x24300024
-#define OMAP2430_REV_ES1_0	0x24300024
+#define OMAP2430_REV_ES1_0	OMAP243X_CLASS
 
 #define OMAP343X_CLASS		0x34300034
-#define OMAP3430_REV_ES1_0	0x34300034
-#define OMAP3430_REV_ES2_0	0x34301034
-#define OMAP3430_REV_ES2_1	0x34302034
-#define OMAP3430_REV_ES3_0	0x34303034
-#define OMAP3430_REV_ES3_1	0x34304034
-#define OMAP3430_REV_ES3_1_2	0x34305034
-
-#define OMAP3630_REV_ES1_0	0x36300034
+#define OMAP3430_REV_ES1_0	OMAP343X_CLASS
+#define OMAP3430_REV_ES2_0	(OMAP343X_CLASS | (OMAP_REVBITS_01 << 8))
+#define OMAP3430_REV_ES2_1	(OMAP343X_CLASS | (OMAP_REVBITS_02 << 8))
+#define OMAP3430_REV_ES3_0	(OMAP343X_CLASS | (OMAP_REVBITS_03 << 8))
+#define OMAP3430_REV_ES3_1	(OMAP343X_CLASS | (OMAP_REVBITS_04 << 8))
+#define OMAP3430_REV_ES3_1_2	(OMAP343X_CLASS | (OMAP_REVBITS_05 << 8))
+
+#define OMAP363X_CLASS		0x36300034
+#define OMAP3630_REV_ES1_0	OMAP363X_CLASS
+#define OMAP3630_REV_ES1_1	(OMAP363X_CLASS | (OMAP_REVBITS_01 << 8))
+#define OMAP3630_REV_ES1_2	(OMAP363X_CLASS | (OMAP_REVBITS_02 << 8))
 
 #define OMAP35XX_CLASS		0x35000034
 #define OMAP3503_REV(v)		(OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
@@ -386,7 +390,8 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define OMAP3517_REV(v)		(OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
 
 #define OMAP443X_CLASS		0x44300044
-#define OMAP4430_REV_ES1_0	0x44300044
+#define OMAP4430_REV_ES1_0	OMAP443X_CLASS
+#define OMAP4430_REV_ES2_0	0x44301044
 
 /*
  * omap_chip bits
@@ -411,10 +416,14 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define CHIP_IS_OMAP3430ES3_1		(1 << 6)
 #define CHIP_IS_OMAP3630ES1		(1 << 7)
 #define CHIP_IS_OMAP4430ES1		(1 << 8)
+#define CHIP_IS_OMAP3630ES1_1           (1 << 9)
+#define CHIP_IS_OMAP3630ES1_2           (1 << 10)
+#define CHIP_IS_OMAP4430ES2		(1 << 11)
 
 #define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
-#define CHIP_IS_OMAP4430		(CHIP_IS_OMAP4430ES1)
+#define CHIP_IS_OMAP4430		(CHIP_IS_OMAP4430ES1 | \
+						 CHIP_IS_OMAP4430ES2)
 
 /*
  * "GE" here represents "greater than or equal to" in terms of ES
@@ -424,11 +433,12 @@ IS_OMAP_TYPE(3517, 0x3517)
  */
 #define CHIP_GE_OMAP3430ES2		(CHIP_IS_OMAP3430ES2 | \
 					 CHIP_IS_OMAP3430ES3_0 | \
-					 CHIP_IS_OMAP3430ES3_1 | \
-					 CHIP_IS_OMAP3630ES1)
+					 CHIP_GE_OMAP3430ES3_1)
 #define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1 | \
-					 CHIP_IS_OMAP3630ES1)
-
+					 CHIP_IS_OMAP3630ES1 | \
+					 CHIP_GE_OMAP3630ES1_1)
+#define CHIP_GE_OMAP3630ES1_1		(CHIP_IS_OMAP3630ES1_1 | \
+					 CHIP_IS_OMAP3630ES1_2)
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
@@ -444,6 +454,7 @@ extern u32 omap3_features;
 #define OMAP3_HAS_NEON			BIT(3)
 #define OMAP3_HAS_ISP			BIT(4)
 #define OMAP3_HAS_192MHZ_CLK		BIT(5)
+#define OMAP3_HAS_IO_WAKEUP		BIT(6)
 
 #define OMAP3_HAS_FEATURE(feat,flag)			\
 static inline unsigned int omap3_has_ ##feat(void)	\
@@ -457,5 +468,6 @@ OMAP3_HAS_FEATURE(iva, IVA)
 OMAP3_HAS_FEATURE(neon, NEON)
 OMAP3_HAS_FEATURE(isp, ISP)
 OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
+OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index 1c529ce9dc11..c915a661f1f5 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -81,37 +81,6 @@ enum omap_color_mode {
 	OMAP_DSS_COLOR_ARGB32	= 1 << 11, /* ARGB32 */
 	OMAP_DSS_COLOR_RGBA32	= 1 << 12, /* RGBA32 */
 	OMAP_DSS_COLOR_RGBX32	= 1 << 13, /* RGBx32 */
-
-	OMAP_DSS_COLOR_GFX_OMAP2 =
-		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
-		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
-		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
-		OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P,
-
-	OMAP_DSS_COLOR_VID_OMAP2 =
-		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
-		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
-		OMAP_DSS_COLOR_UYVY,
-
-	OMAP_DSS_COLOR_GFX_OMAP3 =
-		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
-		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
-		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
-		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
-		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
-		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
-
-	OMAP_DSS_COLOR_VID1_OMAP3 =
-		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
-		OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P |
-		OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY,
-
-	OMAP_DSS_COLOR_VID2_OMAP3 =
-		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
-		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
-		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
-		OMAP_DSS_COLOR_UYVY | OMAP_DSS_COLOR_ARGB32 |
-		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
 };
 
 enum omap_lcd_display_type {
@@ -238,7 +207,7 @@ int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param);
 int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
 int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
 int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data);
-int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data);
+int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u8 *data1, u8 *data2);
 int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
 int dsi_vc_send_null(int channel);
 int dsi_vc_send_bta_sync(int channel);
@@ -277,8 +246,8 @@ struct omap_video_timings {
  * identify the mode, and does not actually use the configs
  * itself. However, the configs should be something that
  * a normal monitor can also show */
-const extern struct omap_video_timings omap_dss_pal_timings;
-const extern struct omap_video_timings omap_dss_ntsc_timings;
+extern const struct omap_video_timings omap_dss_pal_timings;
+extern const struct omap_video_timings omap_dss_ntsc_timings;
 #endif
 
 struct omap_overlay_info {
@@ -560,7 +529,8 @@ void omapdss_dsi_vc_enable_hs(int channel, bool enable);
 int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable);
 
 int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
-				    u16 *x, u16 *y, u16 *w, u16 *h);
+				    u16 *x, u16 *y, u16 *w, u16 *h,
+				    bool enlarge_update_area);
 int omap_dsi_update(struct omap_dss_device *dssdev,
 		int channel,
 		u16 x, u16 y, u16 w, u16 h,
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 02232ca2c37f..0cce4ca83aa0 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -319,6 +319,8 @@
 #define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
 #define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
 
+#define OMAP36XX_DMA_UART4_TX		81	/* S_DMA_80 */
+#define OMAP36XX_DMA_UART4_RX		82	/* S_DMA_81 */
 /*----------------------------------------------------------------------------*/
 
 #define OMAP1_DMA_TOUT_IRQ		(1 << 0)
@@ -335,6 +337,10 @@
 #define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
 
 #define OMAP_DMA_CCR_EN			(1 << 7)
+#define OMAP_DMA_CCR_RD_ACTIVE		(1 << 9)
+#define OMAP_DMA_CCR_WR_ACTIVE		(1 << 10)
+#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC	(1 << 24)
+#define OMAP_DMA_CCR_BUFFERING_DISABLE	(1 << 25)
 
 #define OMAP_DMA_DATA_TYPE_S8		0x00
 #define OMAP_DMA_DATA_TYPE_S16		0x01
@@ -345,6 +351,7 @@
 #define OMAP_DMA_SYNC_BLOCK		0x02
 #define OMAP_DMA_SYNC_PACKET		0x03
 
+#define OMAP_DMA_DST_SYNC_PREFETCH	0x02
 #define OMAP_DMA_SRC_SYNC		0x01
 #define OMAP_DMA_DST_SYNC		0x00
 
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 20f1054c0a80..dfa3aff9761b 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -45,6 +45,8 @@
 #define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
 
 struct omap_dm_timer;
+extern struct omap_dm_timer *gptimer_wakeup;
+extern struct sys_timer omap_timer;
 struct clk;
 
 int omap_dm_timer_init(void);
diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h
new file mode 100644
index 000000000000..9c604b390f9f
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/dsp.h
@@ -0,0 +1,31 @@
+#ifndef __OMAP_DSP_H__
+#define __OMAP_DSP_H__
+
+#include <linux/types.h>
+
+struct omap_dsp_platform_data {
+	void (*dsp_set_min_opp) (u8 opp_id);
+	u8 (*dsp_get_opp) (void);
+	void (*cpu_set_freq) (unsigned long f);
+	unsigned long (*cpu_get_freq) (void);
+	unsigned long mpu_speed[6];
+
+	/* functions to write and read PRCM registers */
+	void (*dsp_prm_write)(u32, s16 , u16);
+	u32 (*dsp_prm_read)(s16 , u16);
+	u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
+	void (*dsp_cm_write)(u32, s16 , u16);
+	u32 (*dsp_cm_read)(s16 , u16);
+	u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+
+	phys_addr_t phys_mempool_base;
+	phys_addr_t phys_mempool_size;
+};
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+extern void omap_dsp_reserve_sdram_memblock(void);
+#else
+static inline void omap_dsp_reserve_sdram_memblock(void) { }
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h
deleted file mode 100644
index da97736f3efa..000000000000
--- a/arch/arm/plat-omap/include/plat/dsp_common.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1)
- *
- * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved.
- *
- * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef ASM_ARCH_DSP_COMMON_H
-#define ASM_ARCH_DSP_COMMON_H
-
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK)
-extern void omap_dsp_request_mpui(void);
-extern void omap_dsp_release_mpui(void);
-extern int omap_dsp_request_mem(void);
-extern int omap_dsp_release_mem(void);
-#else
-static inline int omap_dsp_request_mem(void)
-{
-	return 0;
-}
-#define omap_dsp_release_mem()	do {} while (0)
-#endif
-
-#endif /* ASM_ARCH_DSP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
new file mode 100644
index 000000000000..872de0bf1e6b
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
+ *
+ * Copyright (C) 2009 Li-Pro.Net
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
+
+struct omap_smsc911x_platform_data {
+	int	cs;
+	int	gpio_irq;
+	int	gpio_reset;
+	u32	flags;
+};
+
+#if defined(CONFIG_SMSC911X) || \
+	defined(CONFIG_SMSC911X_MODULE)
+
+extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
+
+#else
+
+static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 145838a81ef6..9fd99b9e40ab 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -25,10 +25,26 @@
 #define GPMC_CS_NAND_ADDRESS	0x20
 #define GPMC_CS_NAND_DATA	0x24
 
-#define GPMC_CONFIG		0x50
-#define GPMC_STATUS		0x54
-#define GPMC_CS0_BASE		0x60
-#define GPMC_CS_SIZE		0x30
+/* Control Commands */
+#define GPMC_CONFIG_RDY_BSY	0x00000001
+#define GPMC_CONFIG_DEV_SIZE	0x00000002
+#define GPMC_CONFIG_DEV_TYPE	0x00000003
+#define GPMC_SET_IRQ_STATUS	0x00000004
+#define GPMC_CONFIG_WP		0x00000005
+
+#define GPMC_GET_IRQ_STATUS	0x00000006
+#define GPMC_PREFETCH_FIFO_CNT	0x00000007 /* bytes available in FIFO for r/w */
+#define GPMC_PREFETCH_COUNT	0x00000008 /* remaining bytes to be read/write*/
+#define GPMC_STATUS_BUFFER	0x00000009 /* 1: buffer is available to write */
+
+#define GPMC_NAND_COMMAND	0x0000000a
+#define GPMC_NAND_ADDRESS	0x0000000b
+#define GPMC_NAND_DATA		0x0000000c
+
+/* ECC commands */
+#define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
+#define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
+#define GPMC_ECC_READSYN	2 /* Reset before syndrom is read back */
 
 #define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
 #define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
@@ -47,7 +63,6 @@
 #define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
 #define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
 #define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(2)
 #define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
 #define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
 #define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
@@ -56,6 +71,14 @@
 #define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
 #define GPMC_CONFIG7_CSVALID		(1 << 6)
 
+#define GPMC_DEVICETYPE_NOR		0
+#define GPMC_DEVICETYPE_NAND		2
+#define GPMC_CONFIG_WRITEPROTECT	0x00000010
+#define GPMC_STATUS_BUFF_EMPTY		0x00000001
+#define WR_RD_PIN_MONITORING		0x00600000
+#define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
+#define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+
 /*
  * Note that all values in this struct are in nanoseconds, while
  * the register values are in gpmc_fck cycles.
@@ -108,10 +131,15 @@ extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
 extern int gpmc_prefetch_enable(int cs, int dma_mode,
 					unsigned int u32_count, int is_write);
-extern void gpmc_prefetch_reset(void);
-extern int gpmc_prefetch_status(void);
+extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
 extern void omap3_gpmc_restore_context(void);
 extern void gpmc_init(void);
+extern int gpmc_read_status(int cmd);
+extern int gpmc_cs_configure(int cs, int cmd, int wval);
+extern int gpmc_nand_read(int cs, int cmd);
+extern int gpmc_nand_write(int cs, int cmd, int wval);
 
+int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
+int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
 #endif
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 87f6bf2ea4fa..36a0befd6168 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -18,6 +18,8 @@
  * 02110-1301 USA
  *
  */
+#ifndef __ASM__ARCH_OMAP_I2C_H
+#define __ASM__ARCH_OMAP_I2C_H
 
 #include <linux/i2c.h>
 
@@ -36,3 +38,5 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
 
 void __init omap1_i2c_mux_pins(int bus_id);
 void __init omap2_i2c_mux_pins(int bus_id);
+
+#endif /* __ASM__ARCH_OMAP_I2C_H */
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 0752af9d099e..33c7d41cb6a5 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -80,6 +80,7 @@ struct iommu_functions {
 
 	int (*enable)(struct iommu *obj);
 	void (*disable)(struct iommu *obj);
+	void (*set_twl)(struct iommu *obj, bool on);
 	u32 (*fault_isr)(struct iommu *obj, u32 *ra);
 
 	void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
@@ -143,6 +144,7 @@ extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
 extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
 
 extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void iommu_set_twl(struct iommu *obj, bool on);
 extern void flush_iotlb_page(struct iommu *obj, u32 da);
 extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
 extern void flush_iotlb_all(struct iommu *obj);
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index c01d9f08a198..65e20a686713 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -345,6 +345,8 @@
 #define INT_34XX_MMC3_IRQ	94
 #define INT_34XX_GPT12_IRQ	95
 
+#define INT_36XX_UART4_IRQ	80
+
 #define INT_35XX_HECC0_IRQ		24
 #define INT_35XX_HECC1_IRQ		28
 #define INT_35XX_EMAC_C0_RXTHRESH_IRQ	67
diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h
index 729166b76a7c..997656552109 100644
--- a/arch/arm/plat-omap/include/plat/mailbox.h
+++ b/arch/arm/plat-omap/include/plat/mailbox.h
@@ -3,10 +3,11 @@
 #ifndef MAILBOX_H
 #define MAILBOX_H
 
-#include <linux/wait.h>
+#include <linux/spinlock.h>
 #include <linux/workqueue.h>
-#include <linux/blkdev.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kfifo.h>
 
 typedef u32 mbox_msg_t;
 struct omap_mbox;
@@ -42,7 +43,7 @@ struct omap_mbox_ops {
 
 struct omap_mbox_queue {
 	spinlock_t		lock;
-	struct request_queue	*queue;
+	struct kfifo		fifo;
 	struct work_struct	work;
 	struct tasklet_struct	tasklet;
 	int	(*callback)(void *);
@@ -52,19 +53,10 @@ struct omap_mbox_queue {
 struct omap_mbox {
 	char			*name;
 	unsigned int		irq;
-
 	struct omap_mbox_queue	*txq, *rxq;
-
 	struct omap_mbox_ops	*ops;
-
-	mbox_msg_t		seq_snd, seq_rcv;
-
 	struct device		*dev;
-
-	struct omap_mbox	*next;
 	void			*priv;
-
-	void			(*err_notify)(void);
 };
 
 int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
@@ -73,8 +65,8 @@ void omap_mbox_init_seq(struct omap_mbox *);
 struct omap_mbox *omap_mbox_get(const char *);
 void omap_mbox_put(struct omap_mbox *);
 
-int omap_mbox_register(struct device *parent, struct omap_mbox *);
-int omap_mbox_unregister(struct omap_mbox *);
+int omap_mbox_register(struct device *parent, struct omap_mbox **);
+int omap_mbox_unregister(void);
 
 static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
 {
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 975744f10a58..b87d83ccd545 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -30,6 +30,13 @@
 #include <mach/hardware.h>
 #include <plat/clock.h>
 
+/* macro for building platform_device for McBSP ports */
+#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr)		\
+static struct platform_device omap_mcbsp##port_nr = {	\
+	.name	= "omap-mcbsp-dai",			\
+	.id	= OMAP_MCBSP##port_nr,			\
+}
+
 #define OMAP7XX_MCBSP1_BASE	0xfffb1000
 #define OMAP7XX_MCBSP2_BASE	0xfffb1800
 
@@ -312,6 +319,18 @@
 #define RFSREN			0x0002
 #define RSYNCERREN		0x0001
 
+/* CLKR signal muxing options */
+#define CLKR_SRC_CLKR		0
+#define CLKR_SRC_CLKX		1
+
+/* FSR signal muxing options */
+#define FSR_SRC_FSR		0
+#define FSR_SRC_FSX		1
+
+/* McBSP functional clock sources */
+#define MCBSP_CLKS_PRCM_SRC	0
+#define MCBSP_CLKS_PAD_SRC	1
+
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
 	u16 spcr2;
@@ -398,6 +417,7 @@ struct omap_mcbsp_spi_cfg {
 struct omap_mcbsp_ops {
 	void (*request)(unsigned int);
 	void (*free)(unsigned int);
+	int (*set_clks_src)(u8, u8);
 };
 
 struct omap_mcbsp_platform_data {
@@ -464,6 +484,9 @@ struct omap_mcbsp {
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count, omap_mcbsp_cache_size;
 
+#define omap_mcbsp_check_valid_id(id)	(id < omap_mcbsp_count)
+#define id_to_mcbsp_ptr(id)		mcbsp_ptr[id];
+
 int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 					int size);
@@ -473,6 +496,7 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
 u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
 u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+u16 omap_mcbsp_get_fifo_size(unsigned int id);
 u16 omap_mcbsp_get_tx_delay(unsigned int id);
 u16 omap_mcbsp_get_rx_delay(unsigned int id);
 int omap_mcbsp_get_dma_op_mode(unsigned int id);
@@ -483,6 +507,7 @@ static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 { }
 static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
 static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; }
 static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; }
 static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; }
 static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
@@ -500,6 +525,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
 int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
 
 
+/* McBSP functional clock source changing function */
+extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id);
 /* SPI specific API */
 void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
 
@@ -508,6 +535,10 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf);
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
 int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
 
+/* McBSP signal muxing API */
+void omap2_mcbsp1_mux_clkr_src(u8 mux);
+void omap2_mcbsp1_mux_fsr_src(u8 mux);
+
 #ifdef CONFIG_ARCH_OMAP3
 /* Sidetone specific API */
 int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index c835f1e994c6..f57f36abb07e 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -71,12 +71,17 @@ struct omap_mmc_platform_data {
 
 	u64 dma_mask;
 
+	/* Register offset deviation */
+	u16 reg_offset;
+
 	struct omap_mmc_slot_data {
 
-		/* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC;
-		 * 8 wire signaling is also optional, and is used with HSMMC
+		/*
+		 * 4/8 wires and any additional host capabilities
+		 * need to OR'd all capabilities (ref. linux/mmc/host.h)
 		 */
-		u8 wires;
+		u8  wires;	/* Used for the MMC driver on omap1 and 2420 */
+		u32 caps;	/* Used for the MMC driver on 2430 and later */
 
 		/*
 		 * nomux means "standard" muxing is wrong on this board, and
@@ -104,6 +109,7 @@ struct omap_mmc_platform_data {
 
 		/* we can put the features above into this variable */
 #define HSMMC_HAS_PBIAS		(1 << 0)
+#define HSMMC_HAS_UPDATED_RESET	(1 << 1)
 		unsigned features;
 
 		int switch_pin;			/* gpio (card detect) */
@@ -122,6 +128,8 @@ struct omap_mmc_platform_data {
 		/* Call back after enabling / disabling regulators */
 		void (*after_set_reg)(struct device *dev, int slot,
 				      int power_on, int vdd);
+		/* if we have special card, init it using this callback */
+		void (*init_card)(struct mmc_card *card);
 
 		/* return MMC cover switch state, can be NULL if not supported.
 		 *
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index c7472a28ce24..aeba71796ad9 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -114,28 +114,11 @@
 	PU_PD_REG(NA, 0)		\
 },
 
-#define MUX_CFG_24XX(desc, reg_offset, mode,			\
-				pull_en, pull_mode, dbg)	\
-{								\
-	.name		= desc,					\
-	.debug		= dbg,					\
-	.mux_reg	= reg_offset,				\
-	.mask		= mode,					\
-	.pull_val	= pull_en,				\
-	.pu_pd_val	= pull_mode,				\
-},
-
-/* 24xx/34xx mux bit defines */
-#define OMAP2_PULL_ENA		(1 << 3)
-#define OMAP2_PULL_UP		(1 << 4)
-#define OMAP2_ALTELECTRICALSEL	(1 << 5)
-
 struct pin_config {
 	char 			*name;
 	const unsigned int 	mux_reg;
 	unsigned char		debug;
 
-#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
 	const unsigned char mask_offset;
 	const unsigned char mask;
 
@@ -147,7 +130,6 @@ struct pin_config {
 	const char *pu_pd_name;
 	const unsigned int pu_pd_reg;
 	const unsigned char pu_pd_val;
-#endif
 
 #if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
 	const char *mux_reg_name;
@@ -191,6 +173,10 @@ enum omap7xx_index {
 	SPI_7XX_4,
 	SPI_7XX_5,
 	SPI_7XX_6,
+
+	/* UART */
+	UART_7XX_1,
+	UART_7XX_2,
 };
 
 enum omap1xxx_index {
@@ -446,208 +432,6 @@ enum omap1xxx_index {
 
 };
 
-enum omap24xx_index {
-	/* 24xx I2C */
-	M19_24XX_I2C1_SCL,
-	L15_24XX_I2C1_SDA,
-	J15_24XX_I2C2_SCL,
-	H19_24XX_I2C2_SDA,
-
-	/* 24xx Menelaus interrupt */
-	W19_24XX_SYS_NIRQ,
-
-	/* 24xx clock */
-	W14_24XX_SYS_CLKOUT,
-
-	/* 24xx GPMC chipselects, wait pin monitoring */
-	E2_GPMC_NCS2,
-	L2_GPMC_NCS7,
-	L3_GPMC_WAIT0,
-	N7_GPMC_WAIT1,
-	M1_GPMC_WAIT2,
-	P1_GPMC_WAIT3,
-
-	/* 242X McBSP */
-	Y15_24XX_MCBSP2_CLKX,
-	R14_24XX_MCBSP2_FSX,
-	W15_24XX_MCBSP2_DR,
-	V15_24XX_MCBSP2_DX,
-
-	/* 24xx GPIO */
-	M21_242X_GPIO11,
-	P21_242X_GPIO12,
-	AA10_242X_GPIO13,
-	AA6_242X_GPIO14,
-	AA4_242X_GPIO15,
-	Y11_242X_GPIO16,
-	AA12_242X_GPIO17,
-	AA8_242X_GPIO58,
-	Y20_24XX_GPIO60,
-	W4__24XX_GPIO74,
-	N15_24XX_GPIO85,
-	M15_24XX_GPIO92,
-	P20_24XX_GPIO93,
-	P18_24XX_GPIO95,
-	M18_24XX_GPIO96,
-	L14_24XX_GPIO97,
-	J15_24XX_GPIO99,
-	V14_24XX_GPIO117,
-	P14_24XX_GPIO125,
-
-	/* 242x DBG GPIO */
-	V4_242X_GPIO49,
-	W2_242X_GPIO50,
-	U4_242X_GPIO51,
-	V3_242X_GPIO52,
-	V2_242X_GPIO53,
-	V6_242X_GPIO53,
-	T4_242X_GPIO54,
-	Y4_242X_GPIO54,
-	T3_242X_GPIO55,
-	U2_242X_GPIO56,
-
-	/* 24xx external DMA requests */
-	AA10_242X_DMAREQ0,
-	AA6_242X_DMAREQ1,
-	E4_242X_DMAREQ2,
-	G4_242X_DMAREQ3,
-	D3_242X_DMAREQ4,
-	E3_242X_DMAREQ5,
-
-	/* UART3 */
-	K15_24XX_UART3_TX,
-	K14_24XX_UART3_RX,
-
-	/* MMC/SDIO */
-	G19_24XX_MMC_CLKO,
-	H18_24XX_MMC_CMD,
-	F20_24XX_MMC_DAT0,
-	H14_24XX_MMC_DAT1,
-	E19_24XX_MMC_DAT2,
-	D19_24XX_MMC_DAT3,
-	F19_24XX_MMC_DAT_DIR0,
-	E20_24XX_MMC_DAT_DIR1,
-	F18_24XX_MMC_DAT_DIR2,
-	E18_24XX_MMC_DAT_DIR3,
-	G18_24XX_MMC_CMD_DIR,
-	H15_24XX_MMC_CLKI,
-
-	/* Full speed USB */
-	J20_24XX_USB0_PUEN,
-	J19_24XX_USB0_VP,
-	K20_24XX_USB0_VM,
-	J18_24XX_USB0_RCV,
-	K19_24XX_USB0_TXEN,
-	J14_24XX_USB0_SE0,
-	K18_24XX_USB0_DAT,
-
-	N14_24XX_USB1_SE0,
-	W12_24XX_USB1_SE0,
-	P15_24XX_USB1_DAT,
-	R13_24XX_USB1_DAT,
-	W20_24XX_USB1_TXEN,
-	P13_24XX_USB1_TXEN,
-	V19_24XX_USB1_RCV,
-	V12_24XX_USB1_RCV,
-
-	AA10_24XX_USB2_SE0,
-	Y11_24XX_USB2_DAT,
-	AA12_24XX_USB2_TXEN,
-	AA6_24XX_USB2_RCV,
-	AA4_24XX_USB2_TLLSE0,
-
-	/* Keypad GPIO*/
-	T19_24XX_KBR0,
-	R19_24XX_KBR1,
-	V18_24XX_KBR2,
-	M21_24XX_KBR3,
-	E5__24XX_KBR4,
-	M18_24XX_KBR5,
-	R20_24XX_KBC0,
-	M14_24XX_KBC1,
-	H19_24XX_KBC2,
-	V17_24XX_KBC3,
-	P21_24XX_KBC4,
-	L14_24XX_KBC5,
-	N19_24XX_KBC6,
-
-	/* 24xx Menelaus Keypad GPIO */
-	B3__24XX_KBR5,
-	AA4_24XX_KBC2,
-	B13_24XX_KBC6,
-
-	/* 2430 USB */
-	AD9_2430_USB0_PUEN,
-	Y11_2430_USB0_VP,
-	AD7_2430_USB0_VM,
-	AE7_2430_USB0_RCV,
-	AD4_2430_USB0_TXEN,
-	AF9_2430_USB0_SE0,
-	AE6_2430_USB0_DAT,
-	AD24_2430_USB1_SE0,
-	AB24_2430_USB1_RCV,
-	Y25_2430_USB1_TXEN,
-	AA26_2430_USB1_DAT,
-
-	/* 2430 HS-USB */
-	AD9_2430_USB0HS_DATA3,
-	Y11_2430_USB0HS_DATA4,
-	AD7_2430_USB0HS_DATA5,
-	AE7_2430_USB0HS_DATA6,
-	AD4_2430_USB0HS_DATA2,
-	AF9_2430_USB0HS_DATA0,
-	AE6_2430_USB0HS_DATA1,
-	AE8_2430_USB0HS_CLK,
-	AD8_2430_USB0HS_DIR,
-	AE5_2430_USB0HS_STP,
-	AE9_2430_USB0HS_NXT,
-	AC7_2430_USB0HS_DATA7,
-
-	/* 2430 McBSP */
-	AD6_2430_MCBSP_CLKS,
-
-	AB2_2430_MCBSP1_CLKR,
-	AD5_2430_MCBSP1_FSR,
-	AA1_2430_MCBSP1_DX,
-	AF3_2430_MCBSP1_DR,
-	AB3_2430_MCBSP1_FSX,
-	Y9_2430_MCBSP1_CLKX,
-
-	AC10_2430_MCBSP2_FSX,
-	AD16_2430_MCBSP2_CLX,
-	AE13_2430_MCBSP2_DX,
-	AD13_2430_MCBSP2_DR,
-	AC10_2430_MCBSP2_FSX_OFF,
-	AD16_2430_MCBSP2_CLX_OFF,
-	AE13_2430_MCBSP2_DX_OFF,
-	AD13_2430_MCBSP2_DR_OFF,
-
-	AC9_2430_MCBSP3_CLKX,
-	AE4_2430_MCBSP3_FSX,
-	AE2_2430_MCBSP3_DR,
-	AF4_2430_MCBSP3_DX,
-
-	N3_2430_MCBSP4_CLKX,
-	AD23_2430_MCBSP4_DR,
-	AB25_2430_MCBSP4_DX,
-	AC25_2430_MCBSP4_FSX,
-
-	AE16_2430_MCBSP5_CLKX,
-	AF12_2430_MCBSP5_FSX,
-	K7_2430_MCBSP5_DX,
-	M1_2430_MCBSP5_DR,
-
-	/* 2430 McSPI*/
-	Y18_2430_MCSPI1_CLK,
-	AD15_2430_MCSPI1_SIMO,
-	AE17_2430_MCSPI1_SOMI,
-	U1_2430_MCSPI1_CS0,
-
-	/* Touchscreen GPIO */
-	AF19_2430_GPIO_85,
-
-};
-
 struct omap_mux_cfg {
 	struct pin_config	*pins;
 	unsigned long		size;
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index f8efd5466b1d..6562cd082bb1 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -21,13 +21,11 @@ struct omap_nand_platform_data {
 	int			(*dev_ready)(struct omap_nand_platform_data *);
 	int			dma_channel;
 	unsigned long		phys_base;
-	void __iomem		*gpmc_cs_baseaddr;
-	void __iomem		*gpmc_baseaddr;
 	int			devsize;
 };
 
-/* size (4 KiB) for IO mapping */
-#define	NAND_IO_SIZE	SZ_4K
+/* minimum size for IO mapping */
+#define	NAND_IO_SIZE	4
 
 #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 extern int gpmc_nand_init(struct omap_nand_platform_data *d);
diff --git a/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h b/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h
new file mode 100644
index 000000000000..01ab6572ccbb
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h
@@ -0,0 +1,31 @@
+#ifndef __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H
+#define __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H
+
+#include "display.h"
+
+/**
+ * struct nokia_dsi_panel_data - Nokia DSI panel driver configuration
+ * @name: panel name
+ * @use_ext_te: use external TE
+ * @ext_te_gpio: external TE GPIO
+ * @use_esd_check: perform ESD checks
+ * @max_backlight_level: maximum backlight level
+ * @set_backlight: pointer to backlight set function
+ * @get_backlight: pointer to backlight get function
+ */
+struct nokia_dsi_panel_data {
+	const char *name;
+
+	int reset_gpio;
+
+	bool use_ext_te;
+	int ext_te_gpio;
+
+	bool use_esd_check;
+
+	int max_backlight_level;
+	int (*set_backlight)(struct omap_dss_device *dssdev, int level);
+	int (*get_backlight)(struct omap_dss_device *dssdev);
+};
+
+#endif /* __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H */
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 3ee41d711492..728fbb9dd549 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -1,8 +1,8 @@
 /*
  * omap-pm.h - OMAP power management interface
  *
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
  * Paul Walmsley
  *
  * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
@@ -16,6 +16,7 @@
 
 #include <linux/device.h>
 #include <linux/cpufreq.h>
+#include <linux/clk.h>
 
 #include "powerdomain.h"
 
@@ -89,7 +90,7 @@ void omap_pm_if_exit(void);
  * @t: maximum MPU wakeup latency in microseconds
  *
  * Request that the maximum interrupt latency for the MPU to be no
- * greater than 't' microseconds. "Interrupt latency" in this case is
+ * greater than @t microseconds. "Interrupt latency" in this case is
  * defined as the elapsed time from the occurrence of a hardware or
  * timer interrupt to the time when the device driver's interrupt
  * service routine has been entered by the MPU.
@@ -105,15 +106,19 @@ void omap_pm_if_exit(void);
  * elapsed from when a device driver enables a hardware device with
  * clk_enable(), to when the device is ready for register access or
  * other use.  To control this device wakeup latency, use
- * set_max_dev_wakeup_lat()
+ * omap_pm_set_max_dev_wakeup_lat()
  *
- * Multiple calls to set_max_mpu_wakeup_lat() will replace the
+ * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the
  * previous t value.  To remove the latency target for the MPU, call
  * with t = -1.
  *
- * No return value.
+ * XXX This constraint will be deprecated soon in favor of the more
+ * general omap_pm_set_max_dev_wakeup_lat()
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
  */
-void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
+int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
 
 
 /**
@@ -123,8 +128,8 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
  * @r: minimum throughput (in KiB/s)
  *
  * Request that the minimum data throughput on the OCP interconnect
- * attached to device 'dev' interconnect agent 'tbus_id' be no less
- * than 'r' KiB/s.
+ * attached to device @dev interconnect agent @tbus_id be no less
+ * than @r KiB/s.
  *
  * It is expected that the OMAP PM or bus code will use this
  * information to set the interconnect clock to run at the lowest
@@ -138,40 +143,44 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
  * code will also need to add an minimum L3 interconnect speed
  * constraint,
  *
- * Multiple calls to set_min_bus_tput() will replace the previous rate
- * value for this device.  To remove the interconnect throughput
- * restriction for this device, call with r = 0.
+ * Multiple calls to omap_pm_set_min_bus_tput() will replace the
+ * previous rate value for this device.  To remove the interconnect
+ * throughput restriction for this device, call with r = 0.
  *
- * No return value.
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
  */
-void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
 
 
 /**
  * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
- * @dev: struct device *
+ * @req_dev: struct device * requesting the constraint, or NULL if none
+ * @dev: struct device * to set the constraint one
  * @t: maximum device wakeup latency in microseconds
  *
- * Request that the maximum amount of time necessary for a device to
- * become accessible after its clocks are enabled should be no greater
- * than 't' microseconds.  Specifically, this represents the time from
- * when a device driver enables device clocks with clk_enable(), to
- * when the register reads and writes on the device will succeed.
- * This function should be called before clk_disable() is called,
- * since the power state transition decision may be made during
- * clk_disable().
+ * Request that the maximum amount of time necessary for a device @dev
+ * to become accessible after its clocks are enabled should be no
+ * greater than @t microseconds.  Specifically, this represents the
+ * time from when a device driver enables device clocks with
+ * clk_enable(), to when the register reads and writes on the device
+ * will succeed.  This function should be called before clk_disable()
+ * is called, since the power state transition decision may be made
+ * during clk_disable().
  *
  * It is intended that underlying PM code will use this information to
  * determine what power state to put the powerdomain enclosing this
  * device into.
  *
- * Multiple calls to set_max_dev_wakeup_lat() will replace the
- * previous wakeup latency values for this device.  To remove the wakeup
- * latency restriction for this device, call with t = -1.
+ * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the
+ * previous wakeup latency values for this device.  To remove the
+ * wakeup latency restriction for this device, call with t = -1.
  *
- * No return value.
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
  */
-void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
+int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
+				   long t);
 
 
 /**
@@ -198,10 +207,71 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
  * value for this device.  To remove the maximum DMA latency for this
  * device, call with t = -1.
  *
- * No return value.
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
  */
-void omap_pm_set_max_sdma_lat(struct device *dev, long t);
+int omap_pm_set_max_sdma_lat(struct device *dev, long t);
+
 
+/**
+ * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev
+ * @dev: struct device * requesting the constraint
+ * @clk: struct clk * to set the minimum rate constraint on
+ * @r: minimum rate in Hz
+ *
+ * Request that the minimum clock rate on the device @dev's clk @clk
+ * be no less than @r Hz.
+ *
+ * It is expected that the OMAP PM code will use this information to
+ * find an OPP or clock setting that will satisfy this clock rate
+ * constraint, along with any other applicable system constraints on
+ * the clock rate or corresponding voltage, etc.
+ *
+ * omap_pm_set_min_clk_rate() differs from the clock code's
+ * clk_set_rate() in that it considers other constraints before taking
+ * any hardware action, and may change a system OPP rather than just a
+ * clock rate.  clk_set_rate() is intended to be a low-level
+ * interface.
+ *
+ * omap_pm_set_min_clk_rate() is easily open to abuse.  A better API
+ * would be something like "omap_pm_set_min_dev_performance()";
+ * however, there is no easily-generalizable concept of performance
+ * that applies to all devices.  Only a device (and possibly the
+ * device subsystem) has both the subsystem-specific knowledge, and
+ * the hardware IP block-specific knowledge, to translate a constraint
+ * on "touchscreen sampling accuracy" or "number of pixels or polygons
+ * rendered per second" to a clock rate.  This translation can be
+ * dependent on the hardware IP block's revision, or firmware version,
+ * and the driver is the only code on the system that has this
+ * information and can know how to translate that into a clock rate.
+ *
+ * The intended use-case for this function is for userspace or other
+ * kernel code to communicate a particular performance requirement to
+ * a subsystem; then for the subsystem to communicate that requirement
+ * to something that is meaningful to the device driver; then for the
+ * device driver to convert that requirement to a clock rate, and to
+ * then call omap_pm_set_min_clk_rate().
+ *
+ * Users of this function (such as device drivers) should not simply
+ * call this function with some high clock rate to ensure "high
+ * performance."  Rather, the device driver should take a performance
+ * constraint from its subsystem, such as "render at least X polygons
+ * per second," and use some formula or table to convert that into a
+ * clock rate constraint given the hardware type and hardware
+ * revision.  Device drivers or subsystems should not assume that they
+ * know how to make a power/performance tradeoff - some device use
+ * cases may tolerate a lower-fidelity device function for lower power
+ * consumption; others may demand a higher-fidelity device function,
+ * no matter what the power consumption.
+ *
+ * Multiple calls to omap_pm_set_min_clk_rate() will replace the
+ * previous rate value for the device @dev.  To remove the minimum clock
+ * rate constraint for the device, call with r = 0.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r);
 
 /*
  * DSP Bridge-specific constraints
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
new file mode 100644
index 000000000000..c8dae02f0704
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -0,0 +1,128 @@
+/*
+ * Driver for OMAP-UART controller.
+ * Based on drivers/serial/8250.c
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * Authors:
+ *	Govindraj R	<govindraj.raja@ti.com>
+ *	Thara Gopinath	<thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __OMAP_SERIAL_H__
+#define __OMAP_SERIAL_H__
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <plat/mux.h>
+
+#define DRIVER_NAME	"omap-hsuart"
+
+/*
+ * Use tty device name as ttyO, [O -> OMAP]
+ * in bootargs we specify as console=ttyO0 if uart1
+ * is used as console uart.
+ */
+#define OMAP_SERIAL_NAME	"ttyO"
+
+#define OMAP_MDR1_DISABLE	0x07
+#define OMAP_MDR1_MODE13X	0x03
+#define OMAP_MDR1_MODE16X	0x00
+#define OMAP_MODE13X_SPEED	230400
+
+/*
+ * LCR = 0XBF: Switch to Configuration Mode B.
+ * In configuration mode b allow access
+ * to EFR,DLL,DLH.
+ * Reference OMAP TRM Chapter 17
+ * Section: 1.4.3 Mode Selection
+ */
+#define OMAP_UART_LCR_CONF_MDB	0XBF
+
+/* WER = 0x7F
+ * Enable module level wakeup in WER reg
+ */
+#define OMAP_UART_WER_MOD_WKUP	0X7F
+
+/* Enable XON/XOFF flow control on output */
+#define OMAP_UART_SW_TX		0x04
+
+/* Enable XON/XOFF flow control on input */
+#define OMAP_UART_SW_RX		0x04
+
+#define OMAP_UART_SYSC_RESET	0X07
+#define OMAP_UART_TCR_TRIG	0X0F
+#define OMAP_UART_SW_CLR	0XF0
+#define OMAP_UART_FIFO_CLR	0X06
+
+#define OMAP_UART_DMA_CH_FREE	-1
+
+#define RX_TIMEOUT		(3 * HZ)
+#define OMAP_MAX_HSUART_PORTS	4
+
+#define MSR_SAVE_FLAGS		UART_MSR_ANY_DELTA
+
+struct omap_uart_port_info {
+	bool			dma_enabled;	/* To specify DMA Mode */
+	unsigned int		uartclk;	/* UART clock rate */
+	void __iomem		*membase;	/* ioremap cookie or NULL */
+	resource_size_t		mapbase;	/* resource base */
+	unsigned long		irqflags;	/* request_irq flags */
+	upf_t			flags;		/* UPF_* flags */
+};
+
+struct uart_omap_dma {
+	u8			uart_dma_tx;
+	u8			uart_dma_rx;
+	int			rx_dma_channel;
+	int			tx_dma_channel;
+	dma_addr_t		rx_buf_dma_phys;
+	dma_addr_t		tx_buf_dma_phys;
+	unsigned int		uart_base;
+	/*
+	 * Buffer for rx dma.It is not required for tx because the buffer
+	 * comes from port structure.
+	 */
+	unsigned char		*rx_buf;
+	unsigned int		prev_rx_dma_pos;
+	int			tx_buf_size;
+	int			tx_dma_used;
+	int			rx_dma_used;
+	spinlock_t		tx_lock;
+	spinlock_t		rx_lock;
+	/* timer to poll activity on rx dma */
+	struct timer_list	rx_timer;
+	int			rx_buf_size;
+	int			rx_timeout;
+};
+
+struct uart_omap_port {
+	struct uart_port	port;
+	struct uart_omap_dma	uart_dma;
+	struct platform_device	*pdev;
+
+	unsigned char		ier;
+	unsigned char		lcr;
+	unsigned char		mcr;
+	unsigned char		fcr;
+	unsigned char		efr;
+
+	int			use_dma;
+	/*
+	 * Some bits in registers are cleared on a read, so they must
+	 * be saved whenever the register is read but the bits will not
+	 * be immediately processed.
+	 */
+	unsigned int		lsr_break_flag;
+	unsigned char		msr_saved_flags;
+	char			name[20];
+	unsigned long		port_activity;
+};
+
+#endif /* __OMAP_SERIAL_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h
index 7055672a8c68..92df9e27cc5c 100644
--- a/arch/arm/plat-omap/include/plat/omap24xx.h
+++ b/arch/arm/plat-omap/include/plat/omap24xx.h
@@ -40,7 +40,7 @@
 #define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
 #define OMAP24XX_IVA_INTC_BASE	0x40000000
 
-#define OMAP2420_CTRL_BASE	L4_24XX_BASE
+#define OMAP242X_CTRL_BASE	L4_24XX_BASE
 #define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
 #define OMAP2420_PRCM_BASE	(L4_24XX_BASE + 0x8000)
 #define OMAP2420_CM_BASE	(L4_24XX_BASE + 0x8000)
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h
new file mode 100644
index 000000000000..2b1d9bc1eebb
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h
@@ -0,0 +1,14 @@
+#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+struct omap4_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+
+	u8 rows;
+	u8 cols;
+};
+
+extern int omap4_keyboard_init(struct omap4_keypad_platform_data *);
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 3694b622c4ac..28e2d1a78433 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -36,6 +36,8 @@
 
 #include <plat/omap_hwmod.h>
 
+extern struct device omap_device_parent;
+
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0
 #define OMAP_DEVICE_STATE_ENABLED	1
@@ -62,7 +64,6 @@
  *
  */
 struct omap_device {
-	u32                             magic;
 	struct platform_device		pdev;
 	struct omap_hwmod		**hwmods;
 	struct omap_device_pm_latency	*pm_lats;
@@ -82,7 +83,6 @@ int omap_device_shutdown(struct platform_device *pdev);
 
 /* Core code interface */
 
-bool omap_device_is_valid(struct omap_device *od);
 int omap_device_count_resources(struct omap_device *od);
 int omap_device_fill_resources(struct omap_device *od, struct resource *res);
 
@@ -101,6 +101,8 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 int omap_device_register(struct omap_device *od);
 int omap_early_device_register(struct omap_device *od);
 
+void __iomem *omap_device_get_rt_va(struct omap_device *od);
+
 /* OMAP PM interface */
 int omap_device_align_pm_lat(struct platform_device *pdev,
 			     u32 new_wakeup_lat_limit);
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 0eccc09ac4a9..7eaa8edf3b14 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -1,7 +1,7 @@
 /*
  * omap_hwmod macros, structures
  *
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
  * Paul Walmsley
  *
  * Created in collaboration with (alphabetical order): Benoît Cousson,
@@ -14,19 +14,16 @@
  *
  * These headers and macros are used to define OMAP on-chip module
  * data and their integration with other OMAP modules and Linux.
- *
- * References:
- * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
- * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
- * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
- * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
- * - Open Core Protocol Specification 2.2
+ * Copious documentation and references can also be found in the
+ * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
+ * writing).
  *
  * To do:
  * - add interconnect error log structures
  * - add pinmuxing
  * - init_conn_id_bit (CONNID_BIT_VECTOR)
  * - implement default hwmod SMS/SDRC flags?
+ * - remove unused fields
  *
  */
 #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
@@ -35,6 +32,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <linux/mutex.h>
 #include <plat/cpu.h>
 
 struct omap_device;
@@ -96,7 +94,7 @@ struct omap_hwmod_irq_info {
 /**
  * struct omap_hwmod_dma_info - DMA channels used by the hwmod
  * @name: name of the DMA channel (module local name)
- * @dma_ch: DMA channel ID
+ * @dma_req: DMA request ID
  *
  * @name should be something short, e.g., "tx" or "rx".  It is for use
  * by platform_get_resource_byname().  It is defined locally to the
@@ -104,7 +102,20 @@ struct omap_hwmod_irq_info {
  */
 struct omap_hwmod_dma_info {
 	const char	*name;
-	u16		dma_ch;
+	u16		dma_req;
+};
+
+/**
+ * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
+ * @name: name of the reset line (module local name)
+ * @rst_shift: Offset of the reset bit
+ *
+ * @name should be something short, e.g., "cpu0" or "rst". It is defined
+ * locally to the hwmod.
+ */
+struct omap_hwmod_rst_info {
+	const char	*name;
+	u8		rst_shift;
 };
 
 /**
@@ -237,8 +248,9 @@ struct omap_hwmod_ocp_if {
 #define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
 #define SYSC_HAS_SIDLEMODE	(1 << 5)
 #define SYSC_HAS_MIDLEMODE	(1 << 6)
-#define SYSS_MISSING		(1 << 7)
+#define SYSS_HAS_RESET_STATUS	(1 << 7)
 #define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
+#define SYSC_HAS_RESET_STATUS	(1 << 9)
 
 /* omap_hwmod_sysconfig.clockact flags */
 #define CLOCKACT_TEST_BOTH	0x0
@@ -327,10 +339,12 @@ struct omap_hwmod_omap2_prcm {
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
  * @clkctrl_reg: PRCM address of the clock control register
+ * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
 	void __iomem	*clkctrl_reg;
+	void __iomem	*rstctrl_reg;
 	u8		submodule_wkdep_bit;
 };
 
@@ -352,6 +366,11 @@ struct omap_hwmod_omap4_prcm {
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
  * HWMOD_NO_IDLEST : this module does not have idle status - this is the case
  *     only for few initiator modules on OMAP2 & 3.
+ * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
+ *     This is needed for devices like DSS that require optional clocks enabled
+ *     in order to complete the reset. Optional clocks will be disabled
+ *     again after the reset.
+ * HWMOD_16BIT_REG: Module has 16bit registers
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -360,6 +379,8 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
 #define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
 #define HWMOD_NO_IDLEST				(1 << 6)
+#define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
+#define HWMOD_16BIT_REG				(1 << 8)
 
 /*
  * omap_hwmod._int_flags definitions
@@ -410,7 +431,7 @@ struct omap_hwmod_class {
  * @class: struct omap_hwmod_class * to the class of this hwmod
  * @od: struct omap_device currently associated with this hwmod (internal use)
  * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
- * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
+ * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt)
  * @prcm: PRCM data pertaining to this hwmod
  * @main_clk: main clock: OMAP clock name
  * @_clk: pointer to the main struct clk (filled in at runtime)
@@ -419,12 +440,12 @@ struct omap_hwmod_class {
  * @slaves: ptr to array of OCP ifs that this hwmod can respond on
  * @dev_attr: arbitrary device attributes that can be passed to the driver
  * @_sysc_cache: internal-use hwmod flags
- * @_rt_va: cached register target start address (internal use)
+ * @_mpu_rt_va: cached register target start address (internal use)
  * @_mpu_port_index: cached MPU register target slave ID (internal use)
  * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
  * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
  * @mpu_irqs_cnt: number of @mpu_irqs
- * @sdma_chs_cnt: number of @sdma_chs
+ * @sdma_reqs_cnt: number of @sdma_reqs
  * @opt_clks_cnt: number of @opt_clks
  * @master_cnt: number of @master entries
  * @slaves_cnt: number of @slave entries
@@ -433,6 +454,7 @@ struct omap_hwmod_class {
  * @_state: internal-use hwmod state
  * @flags: hwmod flags (documented below)
  * @omap_chip: OMAP chips this hwmod is present on
+ * @_mutex: mutex serializing operations on this hwmod
  * @node: list node for hwmod list (internal use)
  *
  * @main_clk refers to this module's "main clock," which for our
@@ -448,7 +470,8 @@ struct omap_hwmod {
 	struct omap_hwmod_class		*class;
 	struct omap_device		*od;
 	struct omap_hwmod_irq_info	*mpu_irqs;
-	struct omap_hwmod_dma_info	*sdma_chs;
+	struct omap_hwmod_dma_info	*sdma_reqs;
+	struct omap_hwmod_rst_info	*rst_lines;
 	union {
 		struct omap_hwmod_omap2_prcm omap2;
 		struct omap_hwmod_omap4_prcm omap4;
@@ -460,7 +483,8 @@ struct omap_hwmod {
 	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
 	void				*dev_attr;
 	u32				_sysc_cache;
-	void __iomem			*_rt_va;
+	void __iomem			*_mpu_rt_va;
+	struct mutex			_mutex;
 	struct list_head		node;
 	u16				flags;
 	u8				_mpu_port_index;
@@ -468,7 +492,8 @@ struct omap_hwmod {
 	u8				msuspendmux_shift;
 	u8				response_lat;
 	u8				mpu_irqs_cnt;
-	u8				sdma_chs_cnt;
+	u8				sdma_reqs_cnt;
+	u8				rst_lines_cnt;
 	u8				opt_clks_cnt;
 	u8				masters_cnt;
 	u8				slaves_cnt;
@@ -482,13 +507,20 @@ int omap_hwmod_init(struct omap_hwmod **ohs);
 int omap_hwmod_register(struct omap_hwmod *oh);
 int omap_hwmod_unregister(struct omap_hwmod *oh);
 struct omap_hwmod *omap_hwmod_lookup(const char *name);
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
-int omap_hwmod_late_init(void);
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
+			void *data);
+int omap_hwmod_late_init(u8 skip_setup_idle);
 
 int omap_hwmod_enable(struct omap_hwmod *oh);
+int _omap_hwmod_enable(struct omap_hwmod *oh);
 int omap_hwmod_idle(struct omap_hwmod *oh);
+int _omap_hwmod_idle(struct omap_hwmod *oh);
 int omap_hwmod_shutdown(struct omap_hwmod *oh);
 
+int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
+
 int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
 int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
 
@@ -497,13 +529,14 @@ int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
 int omap_hwmod_reset(struct omap_hwmod *oh);
 void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
 
-void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs);
-u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs);
+void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
+u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
 
 int omap_hwmod_count_resources(struct omap_hwmod *oh);
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
 
 struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
 
 int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
 				 struct omap_hwmod *init_oh);
@@ -530,5 +563,6 @@ int omap_hwmod_for_each_by_class(const char *classname,
 extern int omap2420_hwmod_init(void);
 extern int omap2430_hwmod_init(void);
 extern int omap3xxx_hwmod_init(void);
+extern int omap44xx_hwmod_init(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
index fb6ec74fe39e..9ca420dcd2f8 100644
--- a/arch/arm/plat-omap/include/plat/powerdomain.h
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
@@ -32,6 +32,7 @@
 
 /* Powerdomain allowable state bitfields */
 #define PWRSTS_ON		(1 << PWRDM_POWER_ON)
+#define PWRSTS_OFF		(1 << PWRDM_POWER_OFF)
 #define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
 				 (1 << PWRDM_POWER_ON))
 
@@ -161,5 +162,6 @@ int pwrdm_state_switch(struct powerdomain *pwrdm);
 int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
 int pwrdm_pre_transition(void);
 int pwrdm_post_transition(void);
+int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index 9fbd91419cd1..ab77442e42ab 100644
--- a/arch/arm/plat-omap/include/plat/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -38,6 +38,8 @@ u32 prm_read_mod_reg(s16 module, u16 idx);
 void prm_write_mod_reg(u32 val, s16 module, u16 idx);
 u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
 u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
+u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
 u32 cm_read_mod_reg(s16 module, u16 idx);
 void cm_write_mod_reg(u32 val, s16 module, u16 idx);
 u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index 7b76f50564ba..efd87c8dda69 100644
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -147,6 +147,7 @@ struct memory_timings {
 };
 
 extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
 
 u32 omap2xxx_sdrc_dll_is_unlocked(void);
 u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index 8983d54c4fd2..ecd6a488c497 100644
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -18,18 +18,13 @@
 #define OMAP_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
-
-/*
- * set_event() is used to wake up secondary core from wfe using sev. ROM
- * code puts the second core into wfe(standby).
- *
- */
-#define set_event()	__asm__ __volatile__ ("sev" : : : "memory")
+#include <asm/smp_mpidr.h>
 
 /* Needed for secondary core boot */
 extern void omap_secondary_startup(void);
 extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
 extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
 
 /*
  * We use Soft IRQ1 as the IPI
@@ -39,15 +34,4 @@ static inline void smp_cross_call(const struct cpumask *mask)
 	gic_raise_softirq(mask, 1);
 }
 
-/*
- * Read MPIDR: Multiprocessor affinity register
- */
-#define hard_smp_processor_id()			\
-	({						\
-		unsigned int cpunum;			\
-		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
-			: "=r" (cpunum));		\
-		cpunum &= 0x0F;				\
-	})
-
 #endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 16a1b458d53c..5905100b29a1 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -11,7 +11,6 @@
 #ifndef __ARCH_ARM_OMAP_SRAM_H
 #define __ARCH_ARM_OMAP_SRAM_H
 
-extern int __init omap_sram_init(void);
 extern void * omap_sram_push(void * start, unsigned long size);
 extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
 
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index bbedd71943f6..9036e374e0ac 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -25,6 +25,8 @@
 
 #include <plat/serial.h>
 
+#define MDR1_MODE_MASK			0x07
+
 static volatile u8 *uart_base;
 static int uart_shift;
 
@@ -42,6 +44,10 @@ static void putc(int c)
 	if (!uart_base)
 		return;
 
+	/* Check for UART 16x mode */
+	if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+		return;
+
 	while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
 		barrier();
 	uart_base[UART_TX << uart_shift] = c;
@@ -133,10 +139,14 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_OMAP2(1, omap3evm);
 		DEBUG_LL_OMAP3(1, omap_3430sdp);
 		DEBUG_LL_OMAP3(1, omap_3630sdp);
+		DEBUG_LL_OMAP3(1, omap3530_lv_som);
+		DEBUG_LL_OMAP3(1, omap3_torpedo);
 
 		/* omap3 based boards using UART3 */
 		DEBUG_LL_OMAP3(3, cm_t35);
+		DEBUG_LL_OMAP3(3, cm_t3517);
 		DEBUG_LL_OMAP3(3, igep0020);
+		DEBUG_LL_OMAP3(3, igep0030);
 		DEBUG_LL_OMAP3(3, nokia_rx51);
 		DEBUG_LL_OMAP3(3, omap3517evm);
 		DEBUG_LL_OMAP3(3, omap3_beagle);
@@ -147,6 +157,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 
 		/* omap4 based boards using UART3 */
 		DEBUG_LL_OMAP4(3, omap_4430sdp);
+		DEBUG_LL_OMAP4(3, omap4_panda);
 
 		/* zoom2/3 external uart */
 		DEBUG_LL_ZOOM(omap_zoom2);
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 98eef5360e6d..59c7fe731f28 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -81,7 +81,34 @@ extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
 
 #endif
 
-void omap_usb_init(struct omap_usb_config *pdata);
+
+/*
+ * FIXME correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#ifdef	CONFIG_USB_GADGET_OMAP
+#define	is_usb0_device(config)	1
+#else
+#define	is_usb0_device(config)	0
+#endif
+
+void omap_otg_init(struct omap_usb_config *config);
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
+void omap2_usbfs_init(struct omap_usb_config *pdata);
+#else
+static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
+{
+}
+#endif
 
 /*-------------------------------------------------------------------------*/
 
@@ -191,5 +218,46 @@ void omap_usb_init(struct omap_usb_config *pdata);
 #	define	USBT2TLL5PI		(1 << 17)
 #	define	USB0PUENACTLOI		(1 << 16)
 #	define	USBSTANDBYCTRL		(1 << 15)
+/* AM35x */
+/* USB 2.0 PHY Control */
+#define CONF2_PHY_GPIOMODE	(1 << 23)
+#define CONF2_OTGMODE		(3 << 14)
+#define CONF2_NO_OVERRIDE	(0 << 14)
+#define CONF2_FORCE_HOST	(1 << 14)
+#define CONF2_FORCE_DEVICE	(2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN		(1 << 13)
+#define CONF2_VBDTCTEN		(1 << 12)
+#define CONF2_REFFREQ_24MHZ	(2 << 8)
+#define CONF2_REFFREQ_26MHZ	(7 << 8)
+#define CONF2_REFFREQ_13MHZ	(6 << 8)
+#define CONF2_REFFREQ		(0xf << 8)
+#define CONF2_PHYCLKGD		(1 << 7)
+#define CONF2_VBUSSENSE		(1 << 6)
+#define CONF2_PHY_PLLON		(1 << 5)
+#define CONF2_RESET		(1 << 4)
+#define CONF2_PHYPWRDN		(1 << 3)
+#define CONF2_OTGPWRDN		(1 << 2)
+#define CONF2_DATPOL		(1 << 1)
+
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
+u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
+u32 omap1_usb1_init(unsigned nwires);
+u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
+#else
+static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
+{
+	return 0;
+}
+static inline u32 omap1_usb1_init(unsigned nwires)
+{
+	return 0;
+
+}
+static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+	return 0;
+}
+#endif
 
 #endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h
index edd4987758a6..0aa4ecd12c7d 100644
--- a/arch/arm/plat-omap/include/plat/vram.h
+++ b/arch/arm/plat-omap/include/plat/vram.h
@@ -38,7 +38,7 @@ extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
 extern void omap_vram_set_sdram_vram(u32 size, u32 start);
 extern void omap_vram_set_sram_vram(u32 size, u32 start);
 
-extern void omap_vram_reserve_sdram(void);
+extern void omap_vram_reserve_sdram_memblock(void);
 extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
 					    unsigned long sram_vstart,
 					    unsigned long sram_size,
@@ -48,7 +48,7 @@ extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
 static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
 static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
 
-static inline void omap_vram_reserve_sdram(void) { }
+static inline void omap_vram_reserve_sdram_memblock(void) { }
 static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
 					    unsigned long sram_vstart,
 					    unsigned long sram_size,
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h
index d8a03ced3b10..3792bdea2f6d 100644
--- a/arch/arm/plat-omap/include/plat/vrfb.h
+++ b/arch/arm/plat-omap/include/plat/vrfb.h
@@ -35,6 +35,7 @@ struct vrfb {
 	bool yuv_mode;
 };
 
+#ifdef CONFIG_OMAP2_VRFB
 extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
 extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
 extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
@@ -47,4 +48,19 @@ extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
 extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot);
 extern void omap_vrfb_restore_context(void);
 
+#else
+static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; }
+static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {}
+static inline void omap_vrfb_adjust_size(u16 *width, u16 *height,
+		u8 bytespp) {}
+static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp)
+		{ return 0; }
+static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp)
+		{ return 0; }
+static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+		u16 width, u16 height, unsigned bytespp, bool yuv_mode) {}
+static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot)
+		{ return 0; }
+static inline void omap_vrfb_restore_context(void) {}
+#endif
 #endif /* __VRFB_H */
diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c
index e6c0d536899c..f07cf2f08e09 100644
--- a/arch/arm/plat-omap/iommu-debug.c
+++ b/arch/arm/plat-omap/iommu-debug.c
@@ -328,12 +328,14 @@ static int debug_open_generic(struct inode *inode, struct file *file)
 		.open = debug_open_generic,				\
 		.read = debug_read_##name,				\
 		.write = debug_write_##name,				\
+		.llseek = generic_file_llseek,				\
 	};
 
 #define DEBUG_FOPS_RO(name)						\
 	static const struct file_operations debug_##name##_fops = {	\
 		.open = debug_open_generic,				\
 		.read = debug_read_##name,				\
+		.llseek = generic_file_llseek,				\
 	};
 
 DEBUG_FOPS_RO(ver);
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index bc094dbacee6..6cd151b31bc5 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -320,6 +320,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
 		if ((start <= da) && (da < start + bytes)) {
 			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
 				__func__, start, da, bytes);
+			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
@@ -370,6 +371,23 @@ void flush_iotlb_all(struct iommu *obj)
 }
 EXPORT_SYMBOL_GPL(flush_iotlb_all);
 
+/**
+ * iommu_set_twl - enable/disable table walking logic
+ * @obj:	target iommu
+ * @on:		enable/disable
+ *
+ * Function used to enable/disable TWL. If one wants to work
+ * exclusively with locked TLB entries and receive notifications
+ * for TLB miss then call this function to disable TWL.
+ */
+void iommu_set_twl(struct iommu *obj, bool on)
+{
+	clk_enable(obj->clk);
+	arch_iommu->set_twl(obj, on);
+	clk_disable(obj->clk);
+}
+EXPORT_SYMBOL_GPL(iommu_set_twl);
+
 #if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
 
 ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t bytes)
@@ -653,7 +671,7 @@ void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
 	if (!*iopgd)
 		goto out;
 
-	if (*iopgd & IOPGD_TABLE)
+	if (iopgd_is_table(*iopgd))
 		iopte = iopte_offset(iopgd, da);
 out:
 	*ppgd = iopgd;
@@ -670,7 +688,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
 	if (!*iopgd)
 		return 0;
 
-	if (*iopgd & IOPGD_TABLE) {
+	if (iopgd_is_table(*iopgd)) {
 		int i;
 		u32 *iopte = iopte_offset(iopgd, da);
 
@@ -745,7 +763,7 @@ static void iopgtable_clear_entry_all(struct iommu *obj)
 		if (!*iopgd)
 			continue;
 
-		if (*iopgd & IOPGD_TABLE)
+		if (iopgd_is_table(*iopgd))
 			iopte_free(iopte_offset(iopgd, 0));
 
 		*iopgd = 0;
@@ -783,9 +801,11 @@ static irqreturn_t iommu_fault_handler(int irq, void *data)
 	if (!stat)
 		return IRQ_HANDLED;
 
+	iommu_disable(obj);
+
 	iopgd = iopgd_offset(obj, da);
 
-	if (!(*iopgd & IOPGD_TABLE)) {
+	if (!iopgd_is_table(*iopgd)) {
 		dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__,
 			da, iopgd, *iopgd);
 		return IRQ_NONE;
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
index ab23b6a140fd..c3e93bb0911f 100644
--- a/arch/arm/plat-omap/iopgtable.h
+++ b/arch/arm/plat-omap/iopgtable.h
@@ -63,6 +63,8 @@
 #define IOPGD_SECTION		(2 << 0)
 #define IOPGD_SUPER		(1 << 18 | 2 << 0)
 
+#define iopgd_is_table(x)	(((x) & 3) == IOPGD_TABLE)
+
 #define IOPTE_SMALL		(2 << 0)
 #define IOPTE_LARGE		(1 << 0)
 
@@ -70,12 +72,12 @@
 #define iopgd_index(da)		(((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
 #define iopgd_offset(obj, da)	((obj)->iopgd + iopgd_index(da))
 
-#define iopte_paddr(iopgd)	(*iopgd & ~((1 << 10) - 1))
-#define iopte_vaddr(iopgd)	((u32 *)phys_to_virt(iopte_paddr(iopgd)))
+#define iopgd_page_paddr(iopgd)	(*iopgd & ~((1 << 10) - 1))
+#define iopgd_page_vaddr(iopgd)	((u32 *)phys_to_virt(iopgd_page_paddr(iopgd)))
 
 /* to find an entry in the second-level page table. */
 #define iopte_index(da)		(((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
-#define iopte_offset(iopgd, da)	(iopte_vaddr(iopgd) + iopte_index(da))
+#define iopte_offset(iopgd, da)	(iopgd_page_vaddr(iopgd) + iopte_index(da))
 
 static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
 				   u32 flags)
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 08a2df766289..d2fafb892f7f 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -21,19 +21,26 @@
  *
  */
 
-#include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/kfifo.h>
+#include <linux/err.h>
 
 #include <plat/mailbox.h>
 
 static struct workqueue_struct *mboxd;
-static struct omap_mbox *mboxes;
-static DEFINE_RWLOCK(mboxes_lock);
+static struct omap_mbox **mboxes;
+static bool rq_full;
 
 static int mbox_configured;
+static DEFINE_MUTEX(mbox_configured_lock);
+
+static unsigned int mbox_kfifo_size = CONFIG_OMAP_MBOX_KFIFO_SIZE;
+module_param(mbox_kfifo_size, uint, S_IRUGO);
+MODULE_PARM_DESC(mbox_kfifo_size, "Size of omap's mailbox kfifo (bytes)");
 
 /* Mailbox FIFO handle functions */
 static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
@@ -67,7 +74,7 @@ static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
 /*
  * message sender
  */
-static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
+static int __mbox_poll_for_space(struct omap_mbox *mbox)
 {
 	int ret = 0, i = 1000;
 
@@ -78,49 +85,50 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 			return -1;
 		udelay(1);
 	}
-	mbox_fifo_write(mbox, msg);
 	return ret;
 }
 
-
 int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 {
+	struct omap_mbox_queue *mq = mbox->txq;
+	int ret = 0, len;
 
-	struct request *rq;
-	struct request_queue *q = mbox->txq->queue;
+	spin_lock(&mq->lock);
 
-	rq = blk_get_request(q, WRITE, GFP_ATOMIC);
-	if (unlikely(!rq))
-		return -ENOMEM;
+	if (kfifo_avail(&mq->fifo) < sizeof(msg)) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
+	WARN_ON(len != sizeof(msg));
 
-	blk_insert_request(q, rq, 0, (void *) msg);
 	tasklet_schedule(&mbox->txq->tasklet);
 
-	return 0;
+out:
+	spin_unlock(&mq->lock);
+	return ret;
 }
 EXPORT_SYMBOL(omap_mbox_msg_send);
 
 static void mbox_tx_tasklet(unsigned long tx_data)
 {
-	int ret;
-	struct request *rq;
 	struct omap_mbox *mbox = (struct omap_mbox *)tx_data;
-	struct request_queue *q = mbox->txq->queue;
-
-	while (1) {
-
-		rq = blk_fetch_request(q);
-
-		if (!rq)
-			break;
+	struct omap_mbox_queue *mq = mbox->txq;
+	mbox_msg_t msg;
+	int ret;
 
-		ret = __mbox_msg_send(mbox, (mbox_msg_t)rq->special);
-		if (ret) {
+	while (kfifo_len(&mq->fifo)) {
+		if (__mbox_poll_for_space(mbox)) {
 			omap_mbox_enable_irq(mbox, IRQ_TX);
-			blk_requeue_request(q, rq);
-			return;
+			break;
 		}
-		blk_end_request_all(rq, 0);
+
+		ret = kfifo_out(&mq->fifo, (unsigned char *)&msg,
+								sizeof(msg));
+		WARN_ON(ret != sizeof(msg));
+
+		mbox_fifo_write(mbox, msg);
 	}
 }
 
@@ -131,36 +139,21 @@ static void mbox_rx_work(struct work_struct *work)
 {
 	struct omap_mbox_queue *mq =
 			container_of(work, struct omap_mbox_queue, work);
-	struct omap_mbox *mbox = mq->queue->queuedata;
-	struct request_queue *q = mbox->rxq->queue;
-	struct request *rq;
 	mbox_msg_t msg;
-	unsigned long flags;
+	int len;
 
-	while (1) {
-		spin_lock_irqsave(q->queue_lock, flags);
-		rq = blk_fetch_request(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-		if (!rq)
-			break;
+	while (kfifo_len(&mq->fifo) >= sizeof(msg)) {
+		len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
+		WARN_ON(len != sizeof(msg));
 
-		msg = (mbox_msg_t)rq->special;
-		blk_end_request_all(rq, 0);
-		mbox->rxq->callback((void *)msg);
+		if (mq->callback)
+			mq->callback((void *)msg);
 	}
 }
 
 /*
  * Mailbox interrupt handler
  */
-static void mbox_txq_fn(struct request_queue *q)
-{
-}
-
-static void mbox_rxq_fn(struct request_queue *q)
-{
-}
-
 static void __mbox_tx_interrupt(struct omap_mbox *mbox)
 {
 	omap_mbox_disable_irq(mbox, IRQ_TX);
@@ -170,19 +163,22 @@ static void __mbox_tx_interrupt(struct omap_mbox *mbox)
 
 static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 {
-	struct request *rq;
+	struct omap_mbox_queue *mq = mbox->rxq;
 	mbox_msg_t msg;
-	struct request_queue *q = mbox->rxq->queue;
+	int len;
 
 	while (!mbox_fifo_empty(mbox)) {
-		rq = blk_get_request(q, WRITE, GFP_ATOMIC);
-		if (unlikely(!rq))
+		if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) {
+			omap_mbox_disable_irq(mbox, IRQ_RX);
+			rq_full = true;
 			goto nomem;
+		}
 
 		msg = mbox_fifo_read(mbox);
 
+		len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
+		WARN_ON(len != sizeof(msg));
 
-		blk_insert_request(q, rq, 0, (void *)msg);
 		if (mbox->ops->type == OMAP_MBOX_TYPE1)
 			break;
 	}
@@ -207,11 +203,9 @@ static irqreturn_t mbox_interrupt(int irq, void *p)
 }
 
 static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
-					request_fn_proc *proc,
 					void (*work) (struct work_struct *),
 					void (*tasklet)(unsigned long))
 {
-	struct request_queue *q;
 	struct omap_mbox_queue *mq;
 
 	mq = kzalloc(sizeof(struct omap_mbox_queue), GFP_KERNEL);
@@ -220,11 +214,8 @@ static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
 
 	spin_lock_init(&mq->lock);
 
-	q = blk_init_queue(proc, &mq->lock);
-	if (!q)
+	if (kfifo_alloc(&mq->fifo, mbox_kfifo_size, GFP_KERNEL))
 		goto error;
-	q->queuedata = mbox;
-	mq->queue = q;
 
 	if (work)
 		INIT_WORK(&mq->work, work);
@@ -239,7 +230,7 @@ error:
 
 static void mbox_queue_free(struct omap_mbox_queue *q)
 {
-	blk_cleanup_queue(q->queue);
+	kfifo_free(&q->fifo);
 	kfree(q);
 }
 
@@ -248,35 +239,35 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
 	int ret = 0;
 	struct omap_mbox_queue *mq;
 
-	if (likely(mbox->ops->startup)) {
-		write_lock(&mboxes_lock);
+	if (mbox->ops->startup) {
+		mutex_lock(&mbox_configured_lock);
 		if (!mbox_configured)
 			ret = mbox->ops->startup(mbox);
 
-		if (unlikely(ret)) {
-			write_unlock(&mboxes_lock);
+		if (ret) {
+			mutex_unlock(&mbox_configured_lock);
 			return ret;
 		}
 		mbox_configured++;
-		write_unlock(&mboxes_lock);
+		mutex_unlock(&mbox_configured_lock);
 	}
 
 	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
 				mbox->name, mbox);
-	if (unlikely(ret)) {
+	if (ret) {
 		printk(KERN_ERR
 			"failed to register mailbox interrupt:%d\n", ret);
 		goto fail_request_irq;
 	}
 
-	mq = mbox_queue_alloc(mbox, mbox_txq_fn, NULL, mbox_tx_tasklet);
+	mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_txq;
 	}
 	mbox->txq = mq;
 
-	mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work, NULL);
+	mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_rxq;
@@ -290,7 +281,7 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
  fail_alloc_txq:
 	free_irq(mbox->irq, mbox);
  fail_request_irq:
-	if (unlikely(mbox->ops->shutdown))
+	if (mbox->ops->shutdown)
 		mbox->ops->shutdown(mbox);
 
 	return ret;
@@ -298,31 +289,20 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
 
 static void omap_mbox_fini(struct omap_mbox *mbox)
 {
+	free_irq(mbox->irq, mbox);
+	tasklet_kill(&mbox->txq->tasklet);
+	flush_work(&mbox->rxq->work);
 	mbox_queue_free(mbox->txq);
 	mbox_queue_free(mbox->rxq);
 
-	free_irq(mbox->irq, mbox);
-
-	if (unlikely(mbox->ops->shutdown)) {
-		write_lock(&mboxes_lock);
+	if (mbox->ops->shutdown) {
+		mutex_lock(&mbox_configured_lock);
 		if (mbox_configured > 0)
 			mbox_configured--;
 		if (!mbox_configured)
 			mbox->ops->shutdown(mbox);
-		write_unlock(&mboxes_lock);
-	}
-}
-
-static struct omap_mbox **find_mboxes(const char *name)
-{
-	struct omap_mbox **p;
-
-	for (p = &mboxes; *p; p = &(*p)->next) {
-		if (strcmp((*p)->name, name) == 0)
-			break;
+		mutex_unlock(&mbox_configured_lock);
 	}
-
-	return p;
 }
 
 struct omap_mbox *omap_mbox_get(const char *name)
@@ -330,14 +310,15 @@ struct omap_mbox *omap_mbox_get(const char *name)
 	struct omap_mbox *mbox;
 	int ret;
 
-	read_lock(&mboxes_lock);
-	mbox = *(find_mboxes(name));
-	if (mbox == NULL) {
-		read_unlock(&mboxes_lock);
-		return ERR_PTR(-ENOENT);
-	}
+	if (!mboxes)
+		return ERR_PTR(-EINVAL);
 
-	read_unlock(&mboxes_lock);
+	for (mbox = *mboxes; mbox; mbox++)
+		if (!strcmp(mbox->name, name))
+			break;
+
+	if (!mbox)
+		return ERR_PTR(-ENOENT);
 
 	ret = omap_mbox_startup(mbox);
 	if (ret)
@@ -353,70 +334,77 @@ void omap_mbox_put(struct omap_mbox *mbox)
 }
 EXPORT_SYMBOL(omap_mbox_put);
 
-int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
+static struct class omap_mbox_class = { .name = "mbox", };
+
+int omap_mbox_register(struct device *parent, struct omap_mbox **list)
 {
-	int ret = 0;
-	struct omap_mbox **tmp;
+	int ret;
+	int i;
 
-	if (!mbox)
+	mboxes = list;
+	if (!mboxes)
 		return -EINVAL;
-	if (mbox->next)
-		return -EBUSY;
-
-	write_lock(&mboxes_lock);
-	tmp = find_mboxes(mbox->name);
-	if (*tmp) {
-		ret = -EBUSY;
-		write_unlock(&mboxes_lock);
-		goto err_find;
-	}
-	*tmp = mbox;
-	write_unlock(&mboxes_lock);
 
+	for (i = 0; mboxes[i]; i++) {
+		struct omap_mbox *mbox = mboxes[i];
+		mbox->dev = device_create(&omap_mbox_class,
+				parent, 0, mbox, "%s", mbox->name);
+		if (IS_ERR(mbox->dev)) {
+			ret = PTR_ERR(mbox->dev);
+			goto err_out;
+		}
+	}
 	return 0;
 
-err_find:
+err_out:
+	while (i--)
+		device_unregister(mboxes[i]->dev);
 	return ret;
 }
 EXPORT_SYMBOL(omap_mbox_register);
 
-int omap_mbox_unregister(struct omap_mbox *mbox)
+int omap_mbox_unregister(void)
 {
-	struct omap_mbox **tmp;
-
-	write_lock(&mboxes_lock);
-	tmp = &mboxes;
-	while (*tmp) {
-		if (mbox == *tmp) {
-			*tmp = mbox->next;
-			mbox->next = NULL;
-			write_unlock(&mboxes_lock);
-			return 0;
-		}
-		tmp = &(*tmp)->next;
-	}
-	write_unlock(&mboxes_lock);
+	int i;
+
+	if (!mboxes)
+		return -EINVAL;
 
-	return -EINVAL;
+	for (i = 0; mboxes[i]; i++)
+		device_unregister(mboxes[i]->dev);
+	mboxes = NULL;
+	return 0;
 }
 EXPORT_SYMBOL(omap_mbox_unregister);
 
 static int __init omap_mbox_init(void)
 {
+	int err;
+
+	err = class_register(&omap_mbox_class);
+	if (err)
+		return err;
+
 	mboxd = create_workqueue("mboxd");
 	if (!mboxd)
 		return -ENOMEM;
 
+	/* kfifo size sanity check: alignment and minimal size */
+	mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t));
+	mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size, sizeof(mbox_msg_t));
+
 	return 0;
 }
-module_init(omap_mbox_init);
+subsys_initcall(omap_mbox_init);
 
 static void __exit omap_mbox_exit(void)
 {
 	destroy_workqueue(mboxd);
+	class_unregister(&omap_mbox_class);
 }
 module_exit(omap_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
-MODULE_AUTHOR("Toshihiro Kobayashi and Hiroshi DOYU");
+MODULE_AUTHOR("Toshihiro Kobayashi");
+MODULE_AUTHOR("Hiroshi DOYU");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 7e669c9744d8..eac4b978e9fd 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -33,7 +33,7 @@
 struct omap_mcbsp **mcbsp_ptr;
 int omap_mcbsp_count, omap_mcbsp_cache_size;
 
-void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
+static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
 {
 	if (cpu_class_is_omap1()) {
 		((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val;
@@ -47,7 +47,7 @@ void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
 	}
 }
 
-int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
+static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
 {
 	if (cpu_class_is_omap1()) {
 		return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
@@ -62,12 +62,12 @@ int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
 }
 
 #ifdef CONFIG_ARCH_OMAP3
-void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
+static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
 {
 	__raw_writel(val, mcbsp->st_data->io_base_st + reg);
 }
 
-int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg)
+static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg)
 {
 	return __raw_readl(mcbsp->st_data->io_base_st + reg);
 }
@@ -80,9 +80,6 @@ int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg)
 #define MCBSP_READ_CACHE(mcbsp, reg) \
 		omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 1)
 
-#define omap_mcbsp_check_valid_id(id)	(id < omap_mcbsp_count)
-#define id_to_mcbsp_ptr(id)		mcbsp_ptr[id];
-
 #define MCBSP_ST_READ(mcbsp, reg) \
 			omap_mcbsp_st_read(mcbsp, OMAP_ST_REG_##reg)
 #define MCBSP_ST_WRITE(mcbsp, reg, val) \
@@ -156,7 +153,7 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 		/* Writing zero to RSYNC_ERR clears the IRQ */
 		MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
 	} else {
-		complete(&mcbsp_rx->tx_irq_completion);
+		complete(&mcbsp_rx->rx_irq_completion);
 	}
 
 	return IRQ_HANDLED;
@@ -481,9 +478,9 @@ int omap_st_is_enabled(unsigned int id)
 EXPORT_SYMBOL(omap_st_is_enabled);
 
 /*
- * omap_mcbsp_set_tx_threshold configures how to deal
- * with transmit threshold. the threshold value and handler can be
- * configure in here.
+ * omap_mcbsp_set_rx_threshold configures the transmit threshold in words.
+ * The threshold parameter is 1 based, and it is converted (threshold - 1)
+ * for the THRSH2 register.
  */
 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
 {
@@ -498,14 +495,15 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	MCBSP_WRITE(mcbsp, THRSH2, threshold);
+	if (threshold && threshold <= mcbsp->max_tx_thres)
+		MCBSP_WRITE(mcbsp, THRSH2, threshold - 1);
 }
 EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
 
 /*
- * omap_mcbsp_set_rx_threshold configures how to deal
- * with receive threshold. the threshold value and handler can be
- * configure in here.
+ * omap_mcbsp_set_rx_threshold configures the receive threshold in words.
+ * The threshold parameter is 1 based, and it is converted (threshold - 1)
+ * for the THRSH1 register.
  */
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 {
@@ -520,7 +518,8 @@ void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	MCBSP_WRITE(mcbsp, THRSH1, threshold);
+	if (threshold && threshold <= mcbsp->max_rx_thres)
+		MCBSP_WRITE(mcbsp, THRSH1, threshold - 1);
 }
 EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
 
@@ -560,8 +559,20 @@ u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
 }
 EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
 
-#define MCBSP2_FIFO_SIZE	0x500 /* 1024 + 256 locations */
-#define MCBSP1345_FIFO_SIZE	0x80  /* 128 locations */
+u16 omap_mcbsp_get_fifo_size(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->pdata->buffer_size;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_fifo_size);
+
 /*
  * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO
  */
@@ -580,10 +591,7 @@ u16 omap_mcbsp_get_tx_delay(unsigned int id)
 	buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
 
 	/* Number of slots are different in McBSP ports */
-	if (mcbsp->id == 2)
-		return MCBSP2_FIFO_SIZE - buffstat;
-	else
-		return MCBSP1345_FIFO_SIZE - buffstat;
+	return mcbsp->pdata->buffer_size - buffstat;
 }
 EXPORT_SYMBOL(omap_mcbsp_get_tx_delay);
 
@@ -867,7 +875,7 @@ EXPORT_SYMBOL(omap_mcbsp_free);
 void omap_mcbsp_start(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
-	int idle;
+	int enable_srg = 0;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -882,10 +890,13 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 	mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7;
 	mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7;
 
-	idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
-			MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
+	/* Only enable SRG, if McBSP is master */
+	w = MCBSP_READ_CACHE(mcbsp, PCR0);
+	if (w & (FSXM | FSRM | CLKXM | CLKRM))
+		enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
+				MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
 
-	if (idle) {
+	if (enable_srg) {
 		/* Start the sample generator */
 		w = MCBSP_READ_CACHE(mcbsp, SPCR2);
 		MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6));
@@ -908,7 +919,7 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 	 */
 	udelay(500);
 
-	if (idle) {
+	if (enable_srg) {
 		/* Start frame sync */
 		w = MCBSP_READ_CACHE(mcbsp, SPCR2);
 		MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
@@ -1634,7 +1645,7 @@ static const struct attribute_group sidetone_attr_group = {
 	.attrs = (struct attribute **)sidetone_attrs,
 };
 
-int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
+static int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
 {
 	struct omap_mcbsp_platform_data *pdata = mcbsp->pdata;
 	struct omap_mcbsp_st_data *st_data;
@@ -1683,8 +1694,16 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 {
 	mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
 	if (cpu_is_omap34xx()) {
-		mcbsp->max_tx_thres = max_thres(mcbsp);
-		mcbsp->max_rx_thres = max_thres(mcbsp);
+		/*
+		 * Initially configure the maximum thresholds to a safe value.
+		 * The McBSP FIFO usage with these values should not go under
+		 * 16 locations.
+		 * If the whole FIFO without safety buffer is used, than there
+		 * is a possibility that the DMA will be not able to push the
+		 * new data on time, causing channel shifts in runtime.
+		 */
+		mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
+		mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
 		/*
 		 * REVISIT: Set dmap_op_mode to THRESHOLD as default
 		 * for mcbsp2 instances.
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 06703635ace1..0d4aa0d5876c 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,7 +54,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 
-	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+	if (!cpu_class_is_omap1()) {
 		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
 				index);
 		WARN_ON(1);
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 186bca82cfab..e129ce80c53b 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -34,11 +34,11 @@ struct omap_opp *l3_opps;
  * Device-driver-originated constraints (via board-*.c files)
  */
 
-void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
+int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
 {
 	if (!dev || t < -1) {
-		WARN_ON(1);
-		return;
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
 	};
 
 	if (t == -1)
@@ -58,14 +58,16 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
 	 *
 	 * TI CDP code can call constraint_set here.
 	 */
+
+	return 0;
 }
 
-void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
 {
 	if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
 	    agent_id != OCP_TARGET_AGENT)) {
-		WARN_ON(1);
-		return;
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
 	};
 
 	if (r == 0)
@@ -83,13 +85,16 @@ void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
 	 *
 	 * TI CDP code can call constraint_set here on the VDD2 OPP.
 	 */
+
+	return 0;
 }
 
-void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
+int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
+				   long t)
 {
-	if (!dev || t < -1) {
-		WARN_ON(1);
-		return;
+	if (!req_dev || !dev || t < -1) {
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
 	};
 
 	if (t == -1)
@@ -111,13 +116,15 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
 	 *
 	 * TI CDP code can call constraint_set here.
 	 */
+
+	return 0;
 }
 
-void omap_pm_set_max_sdma_lat(struct device *dev, long t)
+int omap_pm_set_max_sdma_lat(struct device *dev, long t)
 {
 	if (!dev || t < -1) {
-		WARN_ON(1);
-		return;
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
 	};
 
 	if (t == -1)
@@ -139,8 +146,36 @@ void omap_pm_set_max_sdma_lat(struct device *dev, long t)
 	 * TI CDP code can call constraint_set here.
 	 */
 
+	return 0;
 }
 
+int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r)
+{
+	if (!dev || !c || r < 0) {
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
+	}
+
+	if (r == 0)
+		pr_debug("OMAP PM: remove min clk rate constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add min clk rate constraint: "
+			 "dev %s, rate = %ld Hz\n", dev_name(dev), r);
+
+	/*
+	 * Code in a real implementation should keep track of these
+	 * constraints on the clock, and determine the highest minimum
+	 * clock rate.  It should iterate over each OPP and determine
+	 * whether the OPP will result in a clock rate that would
+	 * satisfy this constraint (and any other PM constraint in effect
+	 * at that time).  Once it finds the lowest-voltage OPP that
+	 * meets those conditions, it should switch to it, or return
+	 * an error if the code is not capable of doing so.
+	 */
+
+	return 0;
+}
 
 /*
  * DSP Bridge-specific constraints
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index f899603051ac..abe933cd8f09 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -1,7 +1,7 @@
 /*
  * omap_device implementation
  *
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
  * Paul Walmsley, Kevin Hilman
  *
  * Developed in collaboration with (alphabetical order): Benoit
@@ -82,6 +82,7 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 
 #include <plat/omap_device.h>
 #include <plat/omap_hwmod.h>
@@ -90,9 +91,6 @@
 #define USE_WAKEUP_LAT			0
 #define IGNORE_WAKEUP_LAT		1
 
-
-#define OMAP_DEVICE_MAGIC 0xf00dcafe
-
 /* Private functions */
 
 /**
@@ -240,6 +238,44 @@ static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
 	return container_of(pdev, struct omap_device, pdev);
 }
 
+/**
+ * _add_optional_clock_alias - Add clock alias for hwmod optional clocks
+ * @od: struct omap_device *od
+ *
+ * For every optional clock present per hwmod per omap_device, this function
+ * adds an entry in the clocks list of the form <dev-id=dev_name, con-id=role>
+ * if an entry is already present in it with the form <dev-id=NULL, con-id=role>
+ *
+ * The function is called from inside omap_device_build_ss(), after
+ * omap_device_register.
+ *
+ * This allows drivers to get a pointer to its optional clocks based on its role
+ * by calling clk_get(<dev*>, <role>).
+ *
+ * No return value.
+ */
+static void _add_optional_clock_alias(struct omap_device *od,
+				      struct omap_hwmod *oh)
+{
+	int i;
+
+	for (i = 0; i < oh->opt_clks_cnt; i++) {
+		struct omap_hwmod_opt_clk *oc;
+		int r;
+
+		oc = &oh->opt_clks[i];
+
+		if (!oc->_clk)
+			continue;
+
+		r = clk_add_alias(oc->role, dev_name(&od->pdev.dev),
+				  (char *)oc->clk, &od->pdev.dev);
+		if (r)
+			pr_err("omap_device: %s: clk_add_alias for %s failed\n",
+			       dev_name(&od->pdev.dev), oc->role);
+	}
+}
+
 
 /* Public functions for use by core code */
 
@@ -254,12 +290,11 @@ static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
  */
 int omap_device_count_resources(struct omap_device *od)
 {
-	struct omap_hwmod *oh;
 	int c = 0;
 	int i;
 
-	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
-		c += omap_hwmod_count_resources(oh);
+	for (i = 0; i < od->hwmods_cnt; i++)
+		c += omap_hwmod_count_resources(od->hwmods[i]);
 
 	pr_debug("omap_device: %s: counted %d total resources across %d "
 		 "hwmods\n", od->pdev.name, c, od->hwmods_cnt);
@@ -286,12 +321,11 @@ int omap_device_count_resources(struct omap_device *od)
  */
 int omap_device_fill_resources(struct omap_device *od, struct resource *res)
 {
-	struct omap_hwmod *oh;
 	int c = 0;
 	int i, r;
 
-	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++) {
-		r = omap_hwmod_fill_resources(oh, res);
+	for (i = 0; i < od->hwmods_cnt; i++) {
+		r = omap_hwmod_fill_resources(od->hwmods[i], res);
 		res += r;
 		c += r;
 	}
@@ -359,7 +393,7 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 	struct omap_device *od;
 	char *pdev_name2;
 	struct resource *res = NULL;
-	int res_count;
+	int i, res_count;
 	struct omap_hwmod **hwmods;
 
 	if (!ohs || oh_cnt == 0 || !pdev_name)
@@ -404,18 +438,23 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 	od->pdev.num_resources = res_count;
 	od->pdev.resource = res;
 
-	platform_device_add_data(&od->pdev, pdata, pdata_len);
+	ret = platform_device_add_data(&od->pdev, pdata, pdata_len);
+	if (ret)
+		goto odbs_exit4;
 
 	od->pm_lats = pm_lats;
 	od->pm_lats_cnt = pm_lats_cnt;
 
-	od->magic = OMAP_DEVICE_MAGIC;
-
 	if (is_early_device)
 		ret = omap_early_device_register(od);
 	else
 		ret = omap_device_register(od);
 
+	for (i = 0; i < oh_cnt; i++) {
+		hwmods[i]->od = od;
+		_add_optional_clock_alias(od, hwmods[i]);
+	}
+
 	if (ret)
 		goto odbs_exit4;
 
@@ -465,6 +504,7 @@ int omap_device_register(struct omap_device *od)
 {
 	pr_debug("omap_device: %s: registering\n", od->pdev.name);
 
+	od->pdev.dev.parent = &omap_device_parent;
 	return platform_device_register(&od->pdev);
 }
 
@@ -558,7 +598,6 @@ int omap_device_shutdown(struct platform_device *pdev)
 {
 	int ret, i;
 	struct omap_device *od;
-	struct omap_hwmod *oh;
 
 	od = _find_by_pdev(pdev);
 
@@ -571,8 +610,8 @@ int omap_device_shutdown(struct platform_device *pdev)
 
 	ret = _omap_device_deactivate(od, IGNORE_WAKEUP_LAT);
 
-	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
-		omap_hwmod_shutdown(oh);
+	for (i = 0; i < od->hwmods_cnt; i++)
+		omap_hwmod_shutdown(od->hwmods[i]);
 
 	od->_state = OMAP_DEVICE_STATE_SHUTDOWN;
 
@@ -619,18 +658,6 @@ int omap_device_align_pm_lat(struct platform_device *pdev,
 }
 
 /**
- * omap_device_is_valid - Check if pointer is a valid omap_device
- * @od: struct omap_device *
- *
- * Return whether struct omap_device pointer @od points to a valid
- * omap_device.
- */
-bool omap_device_is_valid(struct omap_device *od)
-{
-	return (od && od->magic == OMAP_DEVICE_MAGIC);
-}
-
-/**
  * omap_device_get_pwrdm - return the powerdomain * associated with @od
  * @od: struct omap_device *
  *
@@ -652,6 +679,25 @@ struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
 	return omap_hwmod_get_pwrdm(od->hwmods[0]);
 }
 
+/**
+ * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base
+ * @od: struct omap_device *
+ *
+ * Return the MPU's virtual address for the base of the hwmod, from
+ * the ioremap() that the hwmod code does.  Only valid if there is one
+ * hwmod associated with this device.  Returns NULL if there are zero
+ * or more than one hwmods associated with this omap_device;
+ * otherwise, passes along the return value from
+ * omap_hwmod_get_mpu_rt_va().
+ */
+void __iomem *omap_device_get_rt_va(struct omap_device *od)
+{
+	if (od->hwmods_cnt != 1)
+		return NULL;
+
+	return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
+}
+
 /*
  * Public functions intended for use in omap_device_pm_latency
  * .activate_func and .deactivate_func function pointers
@@ -665,11 +711,10 @@ struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
  */
 int omap_device_enable_hwmods(struct omap_device *od)
 {
-	struct omap_hwmod *oh;
 	int i;
 
-	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
-		omap_hwmod_enable(oh);
+	for (i = 0; i < od->hwmods_cnt; i++)
+		omap_hwmod_enable(od->hwmods[i]);
 
 	/* XXX pass along return value here? */
 	return 0;
@@ -683,11 +728,10 @@ int omap_device_enable_hwmods(struct omap_device *od)
  */
 int omap_device_idle_hwmods(struct omap_device *od)
 {
-	struct omap_hwmod *oh;
 	int i;
 
-	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
-		omap_hwmod_idle(oh);
+	for (i = 0; i < od->hwmods_cnt; i++)
+		omap_hwmod_idle(od->hwmods[i]);
 
 	/* XXX pass along return value here? */
 	return 0;
@@ -702,11 +746,10 @@ int omap_device_idle_hwmods(struct omap_device *od)
  */
 int omap_device_disable_clocks(struct omap_device *od)
 {
-	struct omap_hwmod *oh;
 	int i;
 
-	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
-		omap_hwmod_disable_clocks(oh);
+	for (i = 0; i < od->hwmods_cnt; i++)
+		omap_hwmod_disable_clocks(od->hwmods[i]);
 
 	/* XXX pass along return value here? */
 	return 0;
@@ -721,12 +764,22 @@ int omap_device_disable_clocks(struct omap_device *od)
  */
 int omap_device_enable_clocks(struct omap_device *od)
 {
-	struct omap_hwmod *oh;
 	int i;
 
-	for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
-		omap_hwmod_enable_clocks(oh);
+	for (i = 0; i < od->hwmods_cnt; i++)
+		omap_hwmod_enable_clocks(od->hwmods[i]);
 
 	/* XXX pass along return value here? */
 	return 0;
 }
+
+struct device omap_device_parent = {
+	.init_name	= "omap",
+	.parent         = &platform_bus,
+};
+
+static int __init omap_device_init(void)
+{
+	return device_register(&omap_device_parent);
+}
+core_initcall(omap_device_init);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 226b2e858d6c..e2c8eebe6b3a 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/omapfb.h>
 
 #include <asm/tlb.h>
 #include <asm/cacheflush.h>
@@ -30,8 +31,8 @@
 #include <plat/cpu.h>
 #include <plat/vram.h>
 
-#include <plat/control.h>
-
+#include "sram.h"
+#include "fb.h"
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
 # include "../mach-omap2/cm.h"
@@ -53,7 +54,7 @@
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2PLUS)
 #define SRAM_BOOTLOADER_SZ	0x00
 #else
 #define SRAM_BOOTLOADER_SZ	0x80
@@ -68,7 +69,6 @@
 #define OMAP34XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68012858)
 #define OMAP34XX_VA_ADDR_MATCH2		OMAP2_L3_IO_ADDRESS(0x68012880)
 #define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_L3_IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT	OMAP2_L4_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE		0x300
 
@@ -79,12 +79,6 @@ static unsigned long omap_sram_base;
 static unsigned long omap_sram_size;
 static unsigned long omap_sram_ceil;
 
-extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
-					 unsigned long sram_vstart,
-					 unsigned long sram_size,
-					 unsigned long pstart_avail,
-					 unsigned long size_avail);
-
 /*
  * Depending on the target RAMFS firewall setup, the public usable amount of
  * SRAM varies.  The default accessible size for all device types is 2k. A GP
@@ -93,16 +87,7 @@ extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
  */
 static int is_sram_locked(void)
 {
-	int type = 0;
-
-	if (cpu_is_omap44xx())
-		/* Not yet supported */
-		return 0;
-
-	if (cpu_is_omap242x())
-		type = omap_rev() & OMAP2_DEVICETYPE_MASK;
-
-	if (type == GP_DEVICE) {
+	if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
 		/* RAMFW: R/W access to all initiators for all qualifier sets */
 		if (cpu_is_omap242x()) {
 			__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
@@ -127,7 +112,7 @@ static int is_sram_locked(void)
  * to secure SRAM will hang the system. Also the SRAM is not
  * yet mapped at this point.
  */
-void __init omap_detect_sram(void)
+static void __init omap_detect_sram(void)
 {
 	unsigned long reserved;
 
@@ -213,27 +198,14 @@ static struct map_desc omap_sram_io_desc[] __initdata = {
 /*
  * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
  */
-void __init omap_map_sram(void)
+static void __init omap_map_sram(void)
 {
 	unsigned long base;
 
 	if (omap_sram_size == 0)
 		return;
 
-	if (cpu_is_omap24xx()) {
-		omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
-
-		base = OMAP2_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-	}
-
 	if (cpu_is_omap34xx()) {
-		omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
-		base = OMAP3_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-
 		/*
 		 * SRAM must be marked as non-cached on OMAP3 since the
 		 * CORE DPLL M2 divider change code (in SRAM) runs with the
@@ -244,13 +216,11 @@ void __init omap_map_sram(void)
 		omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
 	}
 
-	if (cpu_is_omap44xx()) {
-		omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
-		base = OMAP4_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-	}
-	omap_sram_io_desc[0].length = 1024 * 1024;	/* Use section desc */
+	omap_sram_io_desc[0].virtual = omap_sram_base;
+	base = omap_sram_start;
+	base = ROUND_DOWN(base, PAGE_SIZE);
+	omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+	omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
 	printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
@@ -345,7 +315,7 @@ u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2420
-int __init omap242x_sram_init(void)
+static int __init omap242x_sram_init(void)
 {
 	_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
 					omap242x_sram_ddr_init_sz);
@@ -366,7 +336,7 @@ static inline int omap242x_sram_init(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2430
-int __init omap243x_sram_init(void)
+static int __init omap243x_sram_init(void)
 {
 	_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
 					omap243x_sram_ddr_init_sz);
@@ -422,7 +392,7 @@ void omap3_sram_restore_context(void)
 }
 #endif /* CONFIG_PM */
 
-int __init omap34xx_sram_init(void)
+static int __init omap34xx_sram_init(void)
 {
 	_omap3_sram_configure_core_dpll =
 		omap_sram_push(omap3_sram_configure_core_dpll,
@@ -438,7 +408,7 @@ static inline int omap34xx_sram_init(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-int __init omap44xx_sram_init(void)
+static int __init omap44xx_sram_init(void)
 {
 	printk(KERN_ERR "FIXME: %s not implemented\n", __func__);
 
diff --git a/arch/arm/plat-omap/sram.h b/arch/arm/plat-omap/sram.h
new file mode 100644
index 000000000000..29b43ef97f20
--- /dev/null
+++ b/arch/arm/plat-omap/sram.h
@@ -0,0 +1,6 @@
+#ifndef __PLAT_OMAP_SRAM_H__
+#define __PLAT_OMAP_SRAM_H__
+
+extern int __init omap_sram_init(void);
+
+#endif /* __PLAT_OMAP_SRAM_H__ */
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index d3bf17cd36f3..f3570884883e 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -22,524 +22,13 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/usb/otg.h>
 #include <linux/io.h>
 
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-
-#include <plat/control.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 
-#ifdef CONFIG_ARCH_OMAP1
-
-#define INT_USB_IRQ_GEN		IH2_BASE + 20
-#define INT_USB_IRQ_NISO	IH2_BASE + 30
-#define INT_USB_IRQ_ISO		IH2_BASE + 29
-#define INT_USB_IRQ_HGEN	INT_USB_HHC_1
-#define INT_USB_IRQ_OTG		IH2_BASE + 8
-
-#else
-
-#define INT_USB_IRQ_GEN		INT_24XX_USB_IRQ_GEN
-#define INT_USB_IRQ_NISO	INT_24XX_USB_IRQ_NISO
-#define INT_USB_IRQ_ISO		INT_24XX_USB_IRQ_ISO
-#define INT_USB_IRQ_HGEN	INT_24XX_USB_IRQ_HGEN
-#define INT_USB_IRQ_OTG		INT_24XX_USB_IRQ_OTG
-
-#endif
-
-
-/* These routines should handle the standard chip-specific modes
- * for usb0/1/2 ports, covering basic mux and transceiver setup.
- *
- * Some board-*.c files will need to set up additional mux options,
- * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
- */
-
-/* TESTED ON:
- *  - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
- *  - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
- *  - 5912 OSK UDC, with *nonstandard* A-to-A cable
- *  - 1510 Innovator UDC with bundled usb0 cable
- *  - 1510 Innovator OHCI with bundled usb1/usb2 cable
- *  - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
- *  - 1710 custom development board using alternate pin group
- *  - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
- */
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX)
-
-static void omap2_usb_devconf_clear(u8 port, u32 mask)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r &= ~USBTXWRMODEI(port, mask);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb_devconf_set(u8 port, u32 mask)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r |= USBTXWRMODEI(port, mask);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb2_disable_5pinbitll(void)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb2_enable_5pinunitll(void)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
-{
-	u32	syscon1 = 0;
-
-	if (cpu_is_omap24xx())
-		omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
-
-	if (nwires == 0) {
-		if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
-			u32 l;
-
-			/* pulldown D+/D- */
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l &= ~(3 << 1);
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		return 0;
-	}
-
-	if (is_device) {
-		if (cpu_is_omap24xx())
-			omap_cfg_reg(J20_24XX_USB0_PUEN);
-		else if (cpu_is_omap7xx()) {
-			omap_cfg_reg(AA17_7XX_USB_DM);
-			omap_cfg_reg(W16_7XX_USB_PU_EN);
-			omap_cfg_reg(W17_7XX_USB_VBUSI);
-			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
-			omap_cfg_reg(W19_7XX_USB_DCRST);
-		} else
-			omap_cfg_reg(W4_USB_PUEN);
-	}
-
-	/* internal transceiver (unavailable on 17xx, 24xx) */
-	if (!cpu_class_is_omap2() && nwires == 2) {
-		u32 l;
-
-		// omap_cfg_reg(P9_USB_DP);
-		// omap_cfg_reg(R8_USB_DM);
-
-		if (cpu_is_omap15xx()) {
-			/* This works on 1510-Innovator */
-			return 0;
-		}
-
-		/* NOTES:
-		 *  - peripheral should configure VBUS detection!
-		 *  - only peripherals may use the internal D+/D- pulldowns
-		 *  - OTG support on this port not yet written
-		 */
-
-		/* Don't do this for omap7xx -- it causes USB to not work correctly */
-		if (!cpu_is_omap7xx()) {
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l &= ~(7 << 4);
-			if (!is_device)
-				l |= (3 << 1);
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-
-		return 3 << 16;
-	}
-
-	/* alternate pin config, external transceiver */
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
-		return 0;
-	}
-
-	if (cpu_is_omap24xx()) {
-		omap_cfg_reg(K18_24XX_USB0_DAT);
-		omap_cfg_reg(K19_24XX_USB0_TXEN);
-		omap_cfg_reg(J14_24XX_USB0_SE0);
-		if (nwires != 3)
-			omap_cfg_reg(J18_24XX_USB0_RCV);
-	} else {
-		omap_cfg_reg(V6_USB0_TXD);
-		omap_cfg_reg(W9_USB0_TXEN);
-		omap_cfg_reg(W5_USB0_SE0);
-		if (nwires != 3)
-			omap_cfg_reg(Y5_USB0_RCV);
-	}
-
-	/* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
-	 * may be able to use I2C requests to set those bits along
-	 * with VBUS switching and overcurrent detection.
-	 */
-
-	if (cpu_class_is_omap1() && nwires != 6) {
-		u32 l;
-
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~CONF_USB2_UNI_R;
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
-	}
-
-	switch (nwires) {
-	case 3:
-		syscon1 = 2;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(0, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(0, USB_BIDIR);
-		break;
-	case 6:
-		syscon1 = 3;
-		if (cpu_is_omap24xx()) {
-			omap_cfg_reg(J19_24XX_USB0_VP);
-			omap_cfg_reg(K20_24XX_USB0_VM);
-			omap2_usb_devconf_set(0, USB_UNIDIR);
-		} else {
-			u32 l;
-
-			omap_cfg_reg(AA9_USB0_VP);
-			omap_cfg_reg(R9_USB0_VM);
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l |= CONF_USB2_UNI_R;
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		break;
-	default:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			0, nwires);
-	}
-	return syscon1 << 16;
-}
-
-static u32 __init omap_usb1_init(unsigned nwires)
-{
-	u32	syscon1 = 0;
-
-	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
-		u32 l;
-
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~CONF_USB1_UNI_R;
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
-	}
-	if (cpu_is_omap24xx())
-		omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
-
-	if (nwires == 0)
-		return 0;
-
-	/* external transceiver */
-	if (cpu_class_is_omap1()) {
-		omap_cfg_reg(USB1_TXD);
-		omap_cfg_reg(USB1_TXEN);
-		if (nwires != 3)
-			omap_cfg_reg(USB1_RCV);
-	}
-
-	if (cpu_is_omap15xx()) {
-		omap_cfg_reg(USB1_SEO);
-		omap_cfg_reg(USB1_SPEED);
-		// SUSP
-	} else if (cpu_is_omap1610() || cpu_is_omap5912()) {
-		omap_cfg_reg(W13_1610_USB1_SE0);
-		omap_cfg_reg(R13_1610_USB1_SPEED);
-		// SUSP
-	} else if (cpu_is_omap1710()) {
-		omap_cfg_reg(R13_1710_USB1_SE0);
-		// SUSP
-	} else if (cpu_is_omap24xx()) {
-		/* NOTE:  board-specific code must set up pin muxing for usb1,
-		 * since each signal could come out on either of two balls.
-		 */
-	} else {
-		pr_debug("usb%d cpu unrecognized\n", 1);
-		return 0;
-	}
-
-	switch (nwires) {
-	case 2:
-		if (!cpu_is_omap24xx())
-			goto bad;
-		/* NOTE: board-specific code must override this setting if
-		 * this TLL link is not using DP/DM
-		 */
-		syscon1 = 1;
-		omap2_usb_devconf_set(1, USB_BIDIR_TLL);
-		break;
-	case 3:
-		syscon1 = 2;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(1, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(1, USB_BIDIR);
-		break;
-	case 6:
-		if (cpu_is_omap24xx())
-			goto bad;
-		syscon1 = 3;
-		omap_cfg_reg(USB1_VP);
-		omap_cfg_reg(USB1_VM);
-		if (!cpu_is_omap15xx()) {
-			u32 l;
-
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l |= CONF_USB1_UNI_R;
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		break;
-	default:
-bad:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			1, nwires);
-	}
-	return syscon1 << 20;
-}
-
-static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
-	u32	syscon1 = 0;
-
-	if (cpu_is_omap24xx()) {
-		omap2_usb2_disable_5pinbitll();
-		alt_pingroup = 0;
-	}
-
-	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
-	if (alt_pingroup || nwires == 0)
-		return 0;
-
-	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
-		u32 l;
-
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~CONF_USB2_UNI_R;
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
-	}
-
-	/* external transceiver */
-	if (cpu_is_omap15xx()) {
-		omap_cfg_reg(USB2_TXD);
-		omap_cfg_reg(USB2_TXEN);
-		omap_cfg_reg(USB2_SEO);
-		if (nwires != 3)
-			omap_cfg_reg(USB2_RCV);
-		/* there is no USB2_SPEED */
-	} else if (cpu_is_omap16xx()) {
-		omap_cfg_reg(V6_USB2_TXD);
-		omap_cfg_reg(W9_USB2_TXEN);
-		omap_cfg_reg(W5_USB2_SE0);
-		if (nwires != 3)
-			omap_cfg_reg(Y5_USB2_RCV);
-		// FIXME omap_cfg_reg(USB2_SPEED);
-	} else if (cpu_is_omap24xx()) {
-		omap_cfg_reg(Y11_24XX_USB2_DAT);
-		omap_cfg_reg(AA10_24XX_USB2_SE0);
-		if (nwires > 2)
-			omap_cfg_reg(AA12_24XX_USB2_TXEN);
-		if (nwires > 3)
-			omap_cfg_reg(AA6_24XX_USB2_RCV);
-	} else {
-		pr_debug("usb%d cpu unrecognized\n", 1);
-		return 0;
-	}
-	// if (cpu_class_is_omap1()) omap_cfg_reg(USB2_SUSP);
-
-	switch (nwires) {
-	case 2:
-		if (!cpu_is_omap24xx())
-			goto bad;
-		/* NOTE: board-specific code must override this setting if
-		 * this TLL link is not using DP/DM
-		 */
-		syscon1 = 1;
-		omap2_usb_devconf_set(2, USB_BIDIR_TLL);
-		break;
-	case 3:
-		syscon1 = 2;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(2, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(2, USB_BIDIR);
-		break;
-	case 5:
-		if (!cpu_is_omap24xx())
-			goto bad;
-		omap_cfg_reg(AA4_24XX_USB2_TLLSE0);
-		/* NOTE: board-specific code must override this setting if
-		 * this TLL link is not using DP/DM.  Something must also
-		 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
-		 */
-		syscon1 = 3;
-		omap2_usb2_enable_5pinunitll();
-		break;
-	case 6:
-		if (cpu_is_omap24xx())
-			goto bad;
-		syscon1 = 3;
-		if (cpu_is_omap15xx()) {
-			omap_cfg_reg(USB2_VP);
-			omap_cfg_reg(USB2_VM);
-		} else {
-			u32 l;
-
-			omap_cfg_reg(AA9_USB2_VP);
-			omap_cfg_reg(R9_USB2_VM);
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l |= CONF_USB2_UNI_R;
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		break;
-	default:
-bad:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			2, nwires);
-	}
-	return syscon1 << 24;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-
-static struct resource udc_resources[] = {
-	/* order is significant! */
-	{		/* registers */
-		.start		= UDC_BASE,
-		.end		= UDC_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {		/* general IRQ */
-		.start		= INT_USB_IRQ_GEN,
-		.flags		= IORESOURCE_IRQ,
-	}, {		/* PIO IRQ */
-		.start		= INT_USB_IRQ_NISO,
-		.flags		= IORESOURCE_IRQ,
-	}, {		/* SOF IRQ */
-		.start		= INT_USB_IRQ_ISO,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 udc_dmamask = ~(u32)0;
-
-static struct platform_device udc_device = {
-	.name		= "omap_udc",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &udc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(udc_resources),
-	.resource	= udc_resources,
-};
-
-#endif
-
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
-
-static struct resource ohci_resources[] = {
-	{
-		.start	= OMAP_OHCI_BASE,
-		.end	= OMAP_OHCI_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_IRQ_HGEN,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci_device = {
-	.name			= "ohci",
-	.id			= -1,
-	.dev = {
-		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(ohci_resources),
-	.resource		= ohci_resources,
-};
-
-#endif
-
-#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
-
-static struct resource otg_resources[] = {
-	/* order is significant! */
-	{
-		.start		= OTG_BASE,
-		.end		= OTG_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= INT_USB_IRQ_OTG,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device otg_device = {
-	.name		= "omap_otg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-	.resource	= otg_resources,
-};
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-// FIXME correct answer depends on hmc_mode,
-// as does (on omap1) any nonzero value for config->otg port number
-#ifdef	CONFIG_USB_GADGET_OMAP
-#define	is_usb0_device(config)	1
-#else
-#define	is_usb0_device(config)	0
-#endif
-
-/*-------------------------------------------------------------------------*/
-
 #ifdef	CONFIG_ARCH_OMAP_OTG
 
 void __init
@@ -560,9 +49,9 @@ omap_otg_init(struct omap_usb_config *config)
 	/* pin muxing and transceiver pinouts */
 	if (config->pins[0] > 2)	/* alt pingroup 2 */
 		alt_pingroup = 1;
-	syscon |= omap_usb0_init(config->pins[0], is_usb0_device(config));
-	syscon |= omap_usb1_init(config->pins[1]);
-	syscon |= omap_usb2_init(config->pins[2], alt_pingroup);
+	syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
+	syscon |= config->usb1_init(config->pins[1]);
+	syscon |= config->usb2_init(config->pins[2], alt_pingroup);
 	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
 	omap_writel(syscon, OTG_SYSCON_1);
 
@@ -610,15 +99,11 @@ omap_otg_init(struct omap_usb_config *config)
 
 #ifdef	CONFIG_USB_GADGET_OMAP
 	if (config->otg || config->register_dev) {
+		struct platform_device *udc_device = config->udc_device;
+
 		syscon &= ~DEV_IDLE_EN;
-		udc_device.dev.platform_data = config;
-		/* IRQ numbers for omap7xx */
-		if(cpu_is_omap7xx()) {
-			udc_resources[1].start = INT_7XX_USB_GENI;
-			udc_resources[2].start = INT_7XX_USB_NON_ISO;
-			udc_resources[3].start = INT_7XX_USB_ISO;
-		}
-		status = platform_device_register(&udc_device);
+		udc_device->dev.platform_data = config;
+		status = platform_device_register(udc_device);
 		if (status)
 			pr_debug("can't register UDC device, %d\n", status);
 	}
@@ -626,11 +111,11 @@ omap_otg_init(struct omap_usb_config *config)
 
 #if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	if (config->otg || config->register_host) {
+		struct platform_device *ohci_device = config->ohci_device;
+
 		syscon &= ~HST_IDLE_EN;
-		ohci_device.dev.platform_data = config;
-		if (cpu_is_omap7xx())
-			ohci_resources[1].start = INT_7XX_USB_HHC_1;
-		status = platform_device_register(&ohci_device);
+		ohci_device->dev.platform_data = config;
+		status = platform_device_register(ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
 	}
@@ -638,11 +123,11 @@ omap_otg_init(struct omap_usb_config *config)
 
 #ifdef	CONFIG_USB_OTG
 	if (config->otg) {
+		struct platform_device *otg_device = config->otg_device;
+
 		syscon &= ~OTG_IDLE_EN;
-		otg_device.dev.platform_data = config;
-		if (cpu_is_omap7xx())
-			otg_resources[1].start = INT_7XX_USB_OTG;
-		status = platform_device_register(&otg_device);
+		otg_device->dev.platform_data = config;
+		status = platform_device_register(otg_device);
 		if (status)
 			pr_debug("can't register OTG device, %d\n", status);
 	}
@@ -654,102 +139,5 @@ omap_otg_init(struct omap_usb_config *config)
 }
 
 #else
-static inline void omap_otg_init(struct omap_usb_config *config) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef	CONFIG_ARCH_OMAP15XX
-
-/* ULPD_DPLL_CTRL */
-#define DPLL_IOB		(1 << 13)
-#define DPLL_PLL_ENABLE		(1 << 4)
-#define DPLL_LOCK		(1 << 0)
-
-/* ULPD_APLL_CTRL */
-#define APLL_NDPLL_SWITCH	(1 << 0)
-
-
-static void __init omap_1510_usb_init(struct omap_usb_config *config)
-{
-	unsigned int val;
-	u16 w;
-
-	omap_usb0_init(config->pins[0], is_usb0_device(config));
-	omap_usb1_init(config->pins[1]);
-	omap_usb2_init(config->pins[2], 0);
-
-	val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
-	val |= (config->hmc_mode << 1);
-	omap_writel(val, MOD_CONF_CTRL_0);
-
-	printk("USB: hmc %d", config->hmc_mode);
-	if (config->pins[0])
-		printk(", usb0 %d wires%s", config->pins[0],
-			is_usb0_device(config) ? " (dev)" : "");
-	if (config->pins[1])
-		printk(", usb1 %d wires", config->pins[1]);
-	if (config->pins[2])
-		printk(", usb2 %d wires", config->pins[2]);
-	printk("\n");
-
-	/* use DPLL for 48 MHz function clock */
-	pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
-			omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
-
-	w = omap_readw(ULPD_APLL_CTRL);
-	w &= ~APLL_NDPLL_SWITCH;
-	omap_writew(w, ULPD_APLL_CTRL);
-
-	w = omap_readw(ULPD_DPLL_CTRL);
-	w |= DPLL_IOB | DPLL_PLL_ENABLE;
-	omap_writew(w, ULPD_DPLL_CTRL);
-
-	w = omap_readw(ULPD_SOFT_REQ);
-	w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
-	omap_writew(w, ULPD_SOFT_REQ);
-
-	while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
-		cpu_relax();
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-	if (config->register_dev) {
-		int status;
-
-		udc_device.dev.platform_data = config;
-		status = platform_device_register(&udc_device);
-		if (status)
-			pr_debug("can't register UDC device, %d\n", status);
-		/* udc driver gates 48MHz by D+ pullup */
-	}
-#endif
-
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	if (config->register_host) {
-		int status;
-
-		ohci_device.dev.platform_data = config;
-		status = platform_device_register(&ohci_device);
-		if (status)
-			pr_debug("can't register OHCI device, %d\n", status);
-		/* hcd explicitly gates 48MHz */
-	}
-#endif
-}
-
-#else
-static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
+void omap_otg_init(struct omap_usb_config *config) {}
 #endif
-
-/*-------------------------------------------------------------------------*/
-
-void __init omap_usb_init(struct omap_usb_config *pdata)
-{
-	if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx())
-		omap_otg_init(pdata);
-	else if (cpu_is_omap15xx())
-		omap_1510_usb_init(pdata);
-	else
-		printk(KERN_ERR "USB: No init for your chip yet\n");
-}
-
diff --git a/arch/arm/plat-orion/include/plat/audio.h b/arch/arm/plat-orion/include/plat/audio.h
new file mode 100644
index 000000000000..9cf1f781329b
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/audio.h
@@ -0,0 +1,11 @@
+#ifndef __PLAT_AUDIO_H
+#define __PLAT_AUDIO_H
+
+#include <linux/mbus.h>
+
+struct kirkwood_asoc_platform_data {
+	u32 tclk;
+	struct mbus_dram_target_info *dram;
+	int burst;
+};
+#endif
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index 54c84a492a0f..779553a1595e 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -13,6 +13,7 @@
 #include <linux/mbus.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
+#include <linux/delay.h>
 
 /*
  * PCIe unit register offsets.
@@ -46,6 +47,8 @@
 #define  PCIE_STAT_BUS_OFFS		8
 #define  PCIE_STAT_BUS_MASK		0xff
 #define  PCIE_STAT_LINK_DOWN		1
+#define PCIE_DEBUG_CTRL         0x1a60
+#define  PCIE_DEBUG_SOFT_RESET		(1<<20)
 
 
 u32 __init orion_pcie_dev_id(void __iomem *base)
@@ -85,6 +88,32 @@ void __init orion_pcie_set_local_bus_nr(void __iomem *base, int nr)
 	writel(stat, base + PCIE_STAT_OFF);
 }
 
+void __init orion_pcie_reset(void __iomem *base)
+{
+	u32 reg;
+	int i;
+
+	/*
+	 * MV-S104860-U0, Rev. C:
+	 * PCI Express Unit Soft Reset
+	 * When set, generates an internal reset in the PCI Express unit.
+	 * This bit should be cleared after the link is re-established.
+	 */
+	reg = readl(base + PCIE_DEBUG_CTRL);
+	reg |= PCIE_DEBUG_SOFT_RESET;
+	writel(reg, base + PCIE_DEBUG_CTRL);
+
+	for (i = 0; i < 20; i++) {
+		mdelay(10);
+
+		if (orion_pcie_link_up(base))
+			break;
+	}
+
+	reg &= ~(PCIE_DEBUG_SOFT_RESET);
+	writel(reg, base + PCIE_DEBUG_CTRL);
+}
+
 /*
  * Setup PCIE BARs and Address Decode Wins:
  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
@@ -153,6 +182,11 @@ void __init orion_pcie_setup(void __iomem *base,
 	u32 mask;
 
 	/*
+	 * soft reset PCIe unit
+	 */
+	orion_pcie_reset(base);
+
+	/*
 	 * Point PCIe unit MBUS decode windows to DRAM space.
 	 */
 	orion_pcie_setup_wins(base, dram);
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index a17cc0c6a6b0..4aacdd12c9cc 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -4,7 +4,6 @@
 
 obj-y	:= dma.o
 
-obj-$(CONFIG_ARCH_PXA)		+= pmu.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
index 7b4eadc6df3a..abcc36eb1242 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
+++ b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
@@ -25,6 +25,13 @@
  *
  * 4. matrix key and direct key will use the same debounce_interval by
  *    default, which should be sufficient in most cases
+ *
+ * pxa168 keypad platform specific parameter
+ *
+ * NOTE:
+ * clear_wakeup_event callback is a workaround required to clear the
+ * keypad interrupt. The keypad wake must be cleared in addition to
+ * reading the MI/DI bits in the KPC register.
  */
 struct pxa27x_keypad_platform_data {
 
@@ -52,6 +59,9 @@ struct pxa27x_keypad_platform_data {
 
 	/* key debounce interval */
 	unsigned int	debounce_interval;
+
+	/* clear wakeup event requirement for pxa168 */
+	void		(*clear_wakeup_event)(void);
 };
 
 extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
index 3478eae32d8a..01a8448e471c 100644
--- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
+++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
@@ -30,15 +30,15 @@ struct pxa3xx_nand_cmdset {
 };
 
 struct pxa3xx_nand_flash {
-	const struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
-	const struct pxa3xx_nand_cmdset *cmdset;
-
-	uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */
-	uint32_t page_size;	/* Page size in bytes (PAGE_SZ) */
-	uint32_t flash_width;	/* Width of Flash memory (DWIDTH_M) */
-	uint32_t dfc_width;	/* Width of flash controller(DWIDTH_C) */
-	uint32_t num_blocks;	/* Number of physical blocks in Flash */
-	uint32_t chip_id;
+	uint32_t	chip_id;
+	unsigned int	page_per_block; /* Pages per block (PG_PER_BLK) */
+	unsigned int	page_size;	/* Page size in bytes (PAGE_SZ) */
+	unsigned int	flash_width;	/* Width of Flash memory (DWIDTH_M) */
+	unsigned int	dfc_width;	/* Width of flash controller(DWIDTH_C) */
+	unsigned int	num_blocks;	/* Number of physical blocks in Flash */
+
+	struct pxa3xx_nand_cmdset *cmdset;	/* NAND command set */
+	struct pxa3xx_nand_timing *timing;	/* NAND Flash timing */
 };
 
 struct pxa3xx_nand_platform_data {
diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h
new file mode 100644
index 000000000000..e49c5b6fc4e2
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/sdhci.h
@@ -0,0 +1,32 @@
+/* linux/arch/arm/plat-pxa/include/plat/sdhci.h
+ *
+ * Copyright 2010 Marvell
+ *	Zhangfei Gao <zhangfei.gao@marvell.com>
+ *
+ * PXA Platform - SDHCI platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_PXA_SDHCI_H
+#define __PLAT_PXA_SDHCI_H
+
+/* pxa specific flag */
+/* Require clock free running */
+#define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
+
+/*
+ * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
+ * @max_speed: the maximum speed supported
+ * @quirks: quirks of specific device
+ * @flags: flags for platform requirement
+ */
+struct sdhci_pxa_platdata {
+	unsigned int	max_speed;
+	unsigned int	quirks;
+	unsigned int	flags;
+};
+
+#endif /* __PLAT_PXA_SDHCI_H */
diff --git a/arch/arm/plat-pxa/pmu.c b/arch/arm/plat-pxa/pmu.c
deleted file mode 100644
index 267ceb6feb2f..000000000000
--- a/arch/arm/plat-pxa/pmu.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * PMU IRQ registration for the PXA xscale PMU families.
- * Copyright (C) 2010 Will Deacon, ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/pmu.h>
-#include <mach/irqs.h>
-
-static struct resource pmu_resource = {
-	.start	= IRQ_PMU,
-	.end	= IRQ_PMU,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name		= "arm-pmu",
-	.id		= ARM_PMU_DEVICE_CPU,
-	.resource	= &pmu_resource,
-	.num_resources	= 1,
-};
-
-static int __init pxa_pmu_init(void)
-{
-	platform_device_register(&pmu_device);
-	return 0;
-}
-arch_initcall(pxa_pmu_init);
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index 0732c6c8d511..ef32686feef9 100644
--- a/arch/arm/plat-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -176,7 +176,7 @@ static inline void __add_pwm(struct pwm_device *pwm)
 
 static int __devinit pwm_probe(struct platform_device *pdev)
 {
-	struct platform_device_id *id = platform_get_device_id(pdev);
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct pwm_device *pwm, *secondary = NULL;
 	struct resource *r;
 	int ret = 0;
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 984bf66826d2..5a27b1b538f2 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -69,6 +69,7 @@ config S3C24XX_GPIO_EXTRA
 	int
 	default 128 if S3C24XX_GPIO_EXTRA128
 	default 64 if S3C24XX_GPIO_EXTRA64
+	default 16 if ARCH_H1940
 	default 0
 
 config S3C24XX_GPIO_EXTRA64
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 8474d05274bd..931d26d1a54b 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -43,7 +43,7 @@
 #include <plat/cpu.h>
 #include <plat/pll.h>
 
-/* initalise all the clocks */
+/* initialise all the clocks */
 
 void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
 					   unsigned long hclk,
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 7b44d0c592b5..bcc43f346272 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -147,7 +147,7 @@ static struct mtd_partition smdk_default_nand_part[] = {
 	[7] = {
 		.name	= "S3C2410 flash partition 7",
 		.offset = SZ_1M * 48,
-		.size	= SZ_16M,
+		.size	= MTDPART_SIZ_FULL,
 	}
 };
 
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 452e18438b41..2f91057a0c02 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -247,7 +247,7 @@ static struct resource s3c_iis_resource[] = {
 static u64 s3c_device_iis_dmamask = 0xffffffffUL;
 
 struct platform_device s3c_device_iis = {
-	.name		  = "s3c2410-iis",
+	.name		  = "s3c24xx-iis",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s3c_iis_resource),
 	.resource	  = s3c_iis_resource,
@@ -259,6 +259,21 @@ struct platform_device s3c_device_iis = {
 
 EXPORT_SYMBOL(s3c_device_iis);
 
+/* ASoC PCM DMA */
+
+static u64 s3c_device_audio_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_pcm = {
+	.name		  = "s3c24xx-pcm-audio",
+	.id		  = -1,
+	.dev              = {
+		.dma_mask = &s3c_device_audio_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_pcm);
+
 /* RTC */
 
 static struct resource s3c_rtc_resource[] = {
@@ -481,19 +496,30 @@ static struct resource s3c_ac97_resource[] = {
 	},
 };
 
-static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
-
 struct platform_device s3c_device_ac97 = {
 	.name		  = "s3c-ac97",
 	.id		  = -1,
 	.num_resources	  = ARRAY_SIZE(s3c_ac97_resource),
 	.resource	  = s3c_ac97_resource,
 	.dev              = {
-		.dma_mask = &s3c_device_ac97_dmamask,
+		.dma_mask = &s3c_device_audio_dmamask,
 		.coherent_dma_mask = 0xffffffffUL
 	}
 };
 
 EXPORT_SYMBOL(s3c_device_ac97);
 
+/* ASoC I2S */
+
+struct platform_device s3c2412_device_iis = {
+	.name		  = "s3c2412-iis",
+	.id		  = -1,
+	.dev              = {
+		.dma_mask = &s3c_device_audio_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c2412_device_iis);
+
 #endif // CONFIG_CPU_S32440
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 4c0896f2572d..24c6f5a30596 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -74,11 +74,6 @@ static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset)
 	return -EINVAL;
 }
 
-static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
-{
-	return IRQ_EINT8 + offset;
-}
-
 static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
 	.set_config	= s3c_gpio_setcfg_s3c24xx_a,
 	.get_config	= s3c_gpio_getcfg_s3c24xx_a,
@@ -87,6 +82,8 @@ static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
 struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
 	.set_config	= s3c_gpio_setcfg_s3c24xx,
 	.get_config	= s3c_gpio_getcfg_s3c24xx,
+	.set_pull	= s3c_gpio_setpull_1up,
+	.get_pull	= s3c_gpio_getpull_1up,
 };
 
 struct s3c_gpio_chip s3c24xx_gpios[] = {
@@ -157,12 +154,13 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 	[6] = {
 		.base	= S3C2410_GPGCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.irq_base = IRQ_EINT8,
 		.chip	= {
 			.base			= S3C2410_GPG(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOG",
 			.ngpio			= 16,
-			.to_irq			= s3c24xx_gpiolib_bankg_toirq,
+			.to_irq			= samsung_gpiolib_to_irq,
 		},
 	}, {
 		.base	= S3C2410_GPHCON,
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 11d6a1bbd90d..65dbfa8e0a86 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,9 +7,10 @@
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210)
+	depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310)
 	default y
-	select ARM_VIC
+	select ARM_VIC if !ARCH_S5PV310
+	select ARM_GIC if ARCH_S5PV310
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_GPIO_TRACK
@@ -29,4 +30,29 @@ config S5P_EXT_INT
 	bool
 	help
 	  Use the external interrupts (other than GPIO interrupts.)
-	  Note: Do not choose this for S5P6440.
+	  Note: Do not choose this for S5P6440 and S5P6450.
+
+config S5P_GPIO_INT
+	bool
+	help
+	  Common code for the GPIO interrupts (other than external interrupts.)
+
+config S5P_DEV_FIMC0
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 0
+
+config S5P_DEV_FIMC1
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 1
+
+config S5P_DEV_FIMC2
+	bool
+	help
+	  Compile in platform device definitions for FIMC controller 2
+
+config S5P_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND controller
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 39c242bb9d58..de65238a7aef 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -12,9 +12,19 @@ obj-				:=
 
 # Core files
 
+obj-y				+= dev-pmu.o
 obj-y				+= dev-uart.o
 obj-y				+= cpu.o
 obj-y				+= clock.o
 obj-y				+= irq.o
 obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
+obj-$(CONFIG_S5P_GPIO_INT)	+= irq-gpioint.o
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= irq-pm.o
 
+# devices
+
+obj-$(CONFIG_S5P_DEV_FIMC0)	+= dev-fimc0.o
+obj-$(CONFIG_S5P_DEV_FIMC1)	+= dev-fimc1.o
+obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
+obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index b5e255265f20..8d081d968c58 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -21,6 +21,8 @@
 #include <linux/io.h>
 #include <asm/div64.h>
 
+#include <mach/regs-clock.h>
+
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
 #include <plat/s5p-clock.h>
@@ -74,19 +76,18 @@ struct clk clk_fout_epll = {
 	.ctrlbit	= (1 << 31),
 };
 
-/* VPLL clock output */
-struct clk clk_fout_vpll = {
-	.name		= "fout_vpll",
+/* DPLL clock output */
+struct clk clk_fout_dpll = {
+	.name		= "fout_dpll",
 	.id		= -1,
 	.ctrlbit	= (1 << 31),
 };
 
-/* ARM clock */
-struct clk clk_arm = {
-	.name		= "armclk",
+/* VPLL clock output */
+struct clk clk_fout_vpll = {
+	.name		= "fout_vpll",
 	.id		= -1,
-	.rate		= 0,
-	.ctrlbit	= 0,
+	.ctrlbit	= (1 << 31),
 };
 
 /* Possible clock sources for APLL Mux */
@@ -122,6 +123,17 @@ struct clksrc_sources clk_src_epll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
 };
 
+/* Possible clock sources for DPLL Mux */
+static struct clk *clk_src_dpll_list[] = {
+	[0] = &clk_fin_dpll,
+	[1] = &clk_fout_dpll,
+};
+
+struct clksrc_sources clk_src_dpll = {
+	.sources	= clk_src_dpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_dpll_list),
+};
+
 struct clk clk_vpll = {
 	.name		= "vpll",
 	.id		= -1,
@@ -138,6 +150,24 @@ int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
 	return 0;
 }
 
+int s5p_epll_enable(struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+	if (enable)
+		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+	else
+		__raw_writel(epll_con, S5P_EPLL_CON);
+
+	return 0;
+}
+
+unsigned long s5p_epll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
 static struct clk *s5p_clks[] __initdata = {
 	&clk_ext_xtal_mux,
 	&clk_48m,
@@ -145,8 +175,8 @@ static struct clk *s5p_clks[] __initdata = {
 	&clk_fout_apll,
 	&clk_fout_mpll,
 	&clk_fout_epll,
+	&clk_fout_dpll,
 	&clk_fout_vpll,
-	&clk_arm,
 	&clk_vpll,
 	&clk_xusbxti,
 };
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index 75cb8c37ca2c..74f7f5a5446c 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -19,15 +19,19 @@
 #include <plat/cpu.h>
 #include <plat/s5p6440.h>
 #include <plat/s5p6442.h>
+#include <plat/s5p6450.h>
 #include <plat/s5pc100.h>
 #include <plat/s5pv210.h>
+#include <plat/s5pv310.h>
 
 /* table of supported CPUs */
 
 static const char name_s5p6440[] = "S5P6440";
 static const char name_s5p6442[] = "S5P6442";
+static const char name_s5p6450[] = "S5P6450";
 static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
+static const char name_s5pv310[] = "S5PV310";
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
@@ -36,7 +40,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.map_io		= s5p6440_map_io,
 		.init_clocks	= s5p6440_init_clocks,
 		.init_uarts	= s5p6440_init_uarts,
-		.init		= s5p6440_init,
+		.init		= s5p64x0_init,
 		.name		= name_s5p6440,
 	}, {
 		.idcode		= 0x36442000,
@@ -47,6 +51,14 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= s5p6442_init,
 		.name		= name_s5p6442,
 	}, {
+		.idcode		= 0x36450000,
+		.idmask		= 0xffffff00,
+		.map_io		= s5p6450_map_io,
+		.init_clocks	= s5p6450_init_clocks,
+		.init_uarts	= s5p6450_init_uarts,
+		.init		= s5p64x0_init,
+		.name		= name_s5p6450,
+	}, {
 		.idcode		= 0x43100000,
 		.idmask		= 0xfffff000,
 		.map_io		= s5pc100_map_io,
@@ -62,6 +74,14 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init_uarts	= s5pv210_init_uarts,
 		.init		= s5pv210_init,
 		.name		= name_s5pv210,
+	}, {
+		.idcode		= 0x43200000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pv310_map_io,
+		.init_clocks	= s5pv310_init_clocks,
+		.init_uarts	= s5pv310_init_uarts,
+		.init		= s5pv310_init,
+		.name		= name_s5pv310,
 	},
 };
 
@@ -79,28 +99,13 @@ static struct map_desc s5p_iodesc[] __initdata = {
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC0,
-		.pfn		= __phys_to_pfn(S5P_PA_VIC0),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)VA_VIC1,
-		.pfn		= __phys_to_pfn(S5P_PA_VIC1),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S3C_VA_TIMER,
 		.pfn		= __phys_to_pfn(S5P_PA_TIMER),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5P_PA_GPIO),
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(S3C_PA_WDT),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	},
diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c
new file mode 100644
index 000000000000..608770fc1531
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-fimc0.c
@@ -0,0 +1,43 @@
+/* linux/arch/arm/plat-s5p/dev-fimc0.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC0 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc0_resource[] = {
+	[0] = {
+		.start	= S5P_PA_FIMC0,
+		.end	= S5P_PA_FIMC0 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_FIMC0,
+		.end	= IRQ_FIMC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_fimc0 = {
+	.name		= "s5p-fimc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p_fimc0_resource),
+	.resource	= s5p_fimc0_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc0_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c
new file mode 100644
index 000000000000..76e3a97a87d3
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-fimc1.c
@@ -0,0 +1,43 @@
+/* linux/arch/arm/plat-s5p/dev-fimc1.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC1 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc1_resource[] = {
+	[0] = {
+		.start	= S5P_PA_FIMC1,
+		.end	= S5P_PA_FIMC1 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_FIMC1,
+		.end	= IRQ_FIMC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_fimc1 = {
+	.name		= "s5p-fimc",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p_fimc1_resource),
+	.resource	= s5p_fimc1_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc1_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c
new file mode 100644
index 000000000000..24d29816fa2c
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-fimc2.c
@@ -0,0 +1,43 @@
+/* linux/arch/arm/plat-s5p/dev-fimc2.c
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * Base S5P FIMC2 resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <mach/map.h>
+
+static struct resource s5p_fimc2_resource[] = {
+	[0] = {
+		.start	= S5P_PA_FIMC2,
+		.end	= S5P_PA_FIMC2 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_FIMC2,
+		.end	= IRQ_FIMC2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device s5p_device_fimc2 = {
+	.name		= "s5p-fimc",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s5p_fimc2_resource),
+	.resource	= s5p_fimc2_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc2_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
diff --git a/arch/arm/plat-s5p/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c
new file mode 100644
index 000000000000..6db926202caa
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-onenand.c
@@ -0,0 +1,57 @@
+/* linux/arch/arm/plat-s5p/dev-onenand.c
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ *  Copyright (c) 2008-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5P series device definition for OneNAND devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+static struct resource s5p_onenand_resources[] = {
+	[0] = {
+		.start	= S5P_PA_ONENAND,
+		.end	= S5P_PA_ONENAND + SZ_128K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S5P_PA_ONENAND_DMA,
+		.end	= S5P_PA_ONENAND_DMA + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_ONENAND_AUDI,
+		.end	= IRQ_ONENAND_AUDI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_onenand = {
+	.name		= "s5pc110-onenand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5p_onenand_resources),
+	.resource	= s5p_onenand_resources,
+};
+
+void s5p_onenand_set_platdata(struct onenand_platform_data *pdata)
+{
+	struct onenand_platform_data *pd;
+
+	pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
+	if (!pd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	s5p_device_onenand.dev.platform_data = pd;
+}
diff --git a/arch/arm/plat-s5p/dev-pmu.c b/arch/arm/plat-s5p/dev-pmu.c
new file mode 100644
index 000000000000..a08576da72b0
--- /dev/null
+++ b/arch/arm/plat-s5p/dev-pmu.c
@@ -0,0 +1,36 @@
+/*
+ * linux/arch/arm/plat-s5p/dev-pmu.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/pmu.h>
+#include <mach/irqs.h>
+
+static struct resource s5p_pmu_resource = {
+	.start	= IRQ_PMU,
+	.end	= IRQ_PMU,
+	.flags	= IORESOURCE_IRQ,
+};
+
+struct platform_device s5p_device_pmu = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.num_resources	= 1,
+	.resource	= &s5p_pmu_resource,
+};
+
+static int __init s5p_pmu_init(void)
+{
+	platform_device_register(&s5p_device_pmu);
+	return 0;
+}
+arch_initcall(s5p_pmu_init);
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index a89331ef4ae1..6a7342886171 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -119,6 +119,56 @@ static struct resource s5p_uart3_resource[] = {
 #endif
 };
 
+static struct resource s5p_uart4_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+	[0] = {
+		.start	= S5P_PA_UART4,
+		.end	= S5P_PA_UART4 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX4,
+		.end	= IRQ_S5P_UART_RX4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX4,
+		.end	= IRQ_S5P_UART_TX4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR4,
+		.end	= IRQ_S5P_UART_ERR4,
+		.flags	= IORESOURCE_IRQ,
+	},
+#endif
+};
+
+static struct resource s5p_uart5_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+	[0] = {
+		.start	= S5P_PA_UART5,
+		.end	= S5P_PA_UART5 + S5P_SZ_UART,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S5P_UART_RX5,
+		.end	= IRQ_S5P_UART_RX5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S5P_UART_TX5,
+		.end	= IRQ_S5P_UART_TX5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_S5P_UART_ERR5,
+		.end	= IRQ_S5P_UART_ERR5,
+		.flags	= IORESOURCE_IRQ,
+	},
+#endif
+};
+
 struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
 	[0] = {
 		.resources	= s5p_uart0_resource,
@@ -136,4 +186,12 @@ struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
 		.resources	= s5p_uart3_resource,
 		.nr_resources	= ARRAY_SIZE(s5p_uart3_resource),
 	},
+	[4] = {
+		.resources	= s5p_uart4_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart4_resource),
+	},
+	[5] = {
+		.resources	= s5p_uart5_resource,
+		.nr_resources	= ARRAY_SIZE(s5p_uart5_resource),
+	},
 };
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index 3fb3a3a17465..ba9121c60a2a 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -94,4 +94,22 @@
 						((irq) - S5P_EINT_BASE1) : \
 						((irq) + 16 - S5P_EINT_BASE2))
 
+#define IRQ_EINT_BIT(x)		EINT_OFFSET(x)
+
+/* Typically only a few gpio chips require gpio interrupt support.
+   To avoid memory waste irq descriptors are allocated only for
+   S5P_GPIOINT_GROUP_COUNT chips, each with total number of
+   S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
+   to any gpio chip with the s5p_register_gpio_interrupt() function */
+#define S5P_GPIOINT_GROUP_COUNT 4
+#define S5P_GPIOINT_GROUP_SIZE	8
+#define S5P_GPIOINT_COUNT	(S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
+
+/* IRQ types common for all s5p platforms */
+#define S5P_IRQ_TYPE_LEVEL_LOW		(0x00)
+#define S5P_IRQ_TYPE_LEVEL_HIGH		(0x01)
+#define S5P_IRQ_TYPE_EDGE_FALLING	(0x02)
+#define S5P_IRQ_TYPE_EDGE_RISING	(0x03)
+#define S5P_IRQ_TYPE_EDGE_BOTH		(0x04)
+
 #endif /* __ASM_PLAT_S5P_IRQS_H */
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
index 14828521f70c..fef353d44513 100644
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -13,17 +13,32 @@
 #ifndef __ASM_PLAT_MAP_S5P_H
 #define __ASM_PLAT_MAP_S5P_H __FILE__
 
-#define S5P_VA_CHIPID		S3C_ADDR(0x00700000)
-#define S5P_VA_GPIO		S3C_ADDR(0x00500000)
-#define S5P_VA_SYSTIMER		S3C_ADDR(0x01200000)
-#define S5P_VA_SROMC		S3C_ADDR(0x01100000)
+#define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
+#define S5P_VA_CMU		S3C_ADDR(0x02100000)
+#define S5P_VA_GPIO		S3C_ADDR(0x02200000)
+#define S5P_VA_GPIO1		S5P_VA_GPIO
+#define S5P_VA_GPIO2		S3C_ADDR(0x02240000)
+#define S5P_VA_GPIO3		S3C_ADDR(0x02280000)
 
-#define S5P_VA_UART0		(S3C_VA_UART + 0x0)
-#define S5P_VA_UART1		(S3C_VA_UART + 0x400)
-#define S5P_VA_UART2		(S3C_VA_UART + 0x800)
-#define S5P_VA_UART3		(S3C_VA_UART + 0xC00)
+#define S5P_VA_SYSRAM		S3C_ADDR(0x02400000)
+#define S5P_VA_DMC0		S3C_ADDR(0x02440000)
+#define S5P_VA_DMC1		S3C_ADDR(0x02480000)
+#define S5P_VA_SROMC		S3C_ADDR(0x024C0000)
 
-#define S3C_UART_OFFSET		(0x400)
+#define S5P_VA_SYSTIMER		S3C_ADDR(0x02500000)
+#define S5P_VA_L2CC		S3C_ADDR(0x02600000)
+
+#define S5P_VA_COMBINER_BASE	S3C_ADDR(0x02700000)
+#define S5P_VA_COMBINER(x)	(S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
+
+#define S5P_VA_COREPERI_BASE	S3C_ADDR(0x02800000)
+#define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
+#define S5P_VA_SCU		S5P_VA_COREPERI(0x0)
+#define S5P_VA_GIC_CPU		S5P_VA_COREPERI(0x100)
+#define S5P_VA_TWD		S5P_VA_COREPERI(0x600)
+#define S5P_VA_GIC_DIST		S5P_VA_COREPERI(0x1000)
+
+#define S3C_VA_USB_HSPHY	S3C_ADDR(0x02900000)
 
 #define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
 #define VA_VIC0			VA_VIC(0)
@@ -31,4 +46,14 @@
 #define VA_VIC2			VA_VIC(2)
 #define VA_VIC3			VA_VIC(3)
 
+#define S5P_VA_UART(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_VA_UART0		S5P_VA_UART(0)
+#define S5P_VA_UART1		S5P_VA_UART(1)
+#define S5P_VA_UART2		S5P_VA_UART(2)
+#define S5P_VA_UART3		S5P_VA_UART(3)
+
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET		(0x400)
+#endif
+
 #endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index 7db322726bc2..bf28fadee7ae 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -46,6 +46,54 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
 	return (unsigned long)fvco;
 }
 
+#define PLL46XX_KDIV_MASK	(0xFFFF)
+#define PLL4650C_KDIV_MASK	(0xFFF)
+#define PLL46XX_MDIV_MASK	(0x1FF)
+#define PLL46XX_PDIV_MASK	(0x3F)
+#define PLL46XX_SDIV_MASK	(0x7)
+#define PLL46XX_MDIV_SHIFT	(16)
+#define PLL46XX_PDIV_SHIFT	(8)
+#define PLL46XX_SDIV_SHIFT	(0)
+
+enum pll46xx_type_t {
+	pll_4600,
+	pll_4650,
+	pll_4650c,
+};
+
+static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
+					    u32 pll_con0, u32 pll_con1,
+					    enum pll46xx_type_t pll_type)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+	if (pll_type == pll_4650c)
+		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
+	else
+		kdiv = pll_con1 & PLL46XX_KDIV_MASK;
+
+	tmp = baseclk;
+
+	if (pll_type == pll_4600) {
+		tmp *= (mdiv << 16) + kdiv;
+		do_div(tmp, (pdiv << sdiv));
+		result = tmp >> 16;
+	} else {
+		tmp *= (mdiv << 10) + kdiv;
+		do_div(tmp, (pdiv << sdiv));
+		result = tmp >> 10;
+	}
+
+	return result;
+}
+
 #define PLL90XX_MDIV_MASK	(0xFF)
 #define PLL90XX_PDIV_MASK	(0x3F)
 #define PLL90XX_SDIV_MASK	(0x7)
diff --git a/arch/arm/plat-s5p/include/plat/reset.h b/arch/arm/plat-s5p/include/plat/reset.h
new file mode 100644
index 000000000000..335e97812eed
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/reset.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/plat-s5p/include/plat/reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_RESET_H
+#define __ASM_PLAT_S5P_RESET_H __FILE__
+
+extern void (*s5p_reset_hook)(void);
+
+#endif /* __ASM_PLAT_S5P_RESET_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
index 09418b1101fe..2b6dcff8ab2b 100644
--- a/arch/arm/plat-s5p/include/plat/s5p-clock.h
+++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h
  *
- * Copyright 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  * Header file for s5p clock support
  *
@@ -20,6 +20,7 @@
 #define clk_fin_apll clk_ext_xtal_mux
 #define clk_fin_mpll clk_ext_xtal_mux
 #define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_dpll clk_ext_xtal_mux
 #define clk_fin_vpll clk_ext_xtal_mux
 #define clk_fin_hpll clk_ext_xtal_mux
 
@@ -30,6 +31,7 @@ extern struct clk s5p_clk_27m;
 extern struct clk clk_fout_apll;
 extern struct clk clk_fout_mpll;
 extern struct clk clk_fout_epll;
+extern struct clk clk_fout_dpll;
 extern struct clk clk_fout_vpll;
 extern struct clk clk_arm;
 extern struct clk clk_vpll;
@@ -37,8 +39,12 @@ extern struct clk clk_vpll;
 extern struct clksrc_sources clk_src_apll;
 extern struct clksrc_sources clk_src_mpll;
 extern struct clksrc_sources clk_src_epll;
+extern struct clksrc_sources clk_src_dpll;
 
-extern int s5p6440_clk48m_ctrl(struct clk *clk, int enable);
 extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
 
+/* Common EPLL operations for S5P platform */
+extern int s5p_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p_epll_get_rate(struct clk *clk);
+
 #endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h
index a4cd75afeb3b..528585d2cafc 100644
--- a/arch/arm/plat-s5p/include/plat/s5p6440.h
+++ b/arch/arm/plat-s5p/include/plat/s5p6440.h
@@ -12,24 +12,23 @@
 
  /* Common init code for S5P6440 related SoCs */
 
-extern void s5p6440_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void s5p6440_register_clocks(void);
 extern void s5p6440_setup_clocks(void);
 
 #ifdef CONFIG_CPU_S5P6440
 
-extern  int s5p6440_init(void);
+extern  int s5p64x0_init(void);
 extern void s5p6440_init_irq(void);
 extern void s5p6440_map_io(void);
 extern void s5p6440_init_clocks(int xtal);
 
-#define s5p6440_init_uarts s5p6440_common_init_uarts
+extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
 #else
 #define s5p6440_init_clocks NULL
 #define s5p6440_init_uarts NULL
 #define s5p6440_map_io NULL
-#define s5p6440_init NULL
+#define s5p64x0_init NULL
 #endif
 
 /* S5P6440 timer */
diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-s5p/include/plat/s5p6450.h
new file mode 100644
index 000000000000..640a41c26be3
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6450.h
@@ -0,0 +1,36 @@
+/* arch/arm/plat-s5p/include/plat/s5p6450.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for s5p6450 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5P6450 related SoCs */
+
+extern void s5p6450_register_clocks(void);
+extern void s5p6450_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6450
+
+extern  int s5p64x0_init(void);
+extern void s5p6450_init_irq(void);
+extern void s5p6450_map_io(void);
+extern void s5p6450_init_clocks(int xtal);
+
+extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6450_init_clocks NULL
+#define s5p6450_init_uarts NULL
+#define s5p6450_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+/* S5P6450 timer */
+
+extern struct sys_timer s5p6450_timer;
diff --git a/arch/arm/plat-s5p/include/plat/s5pv310.h b/arch/arm/plat-s5p/include/plat/s5pv310.h
new file mode 100644
index 000000000000..769c991ceb37
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5pv310.h
@@ -0,0 +1,34 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5pv310.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5pv310 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PV310 related SoCs */
+
+extern void s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pv310_register_clocks(void);
+extern void s5pv310_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PV310
+
+extern  int s5pv310_init(void);
+extern void s5pv310_init_irq(void);
+extern void s5pv310_map_io(void);
+extern void s5pv310_init_clocks(int xtal);
+extern struct sys_timer s5pv310_timer;
+
+#define s5pv310_init_uarts s5pv310_common_init_uarts
+
+#else
+#define s5pv310_init_clocks NULL
+#define s5pv310_init_uarts NULL
+#define s5pv310_map_io NULL
+#define s5pv310_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/include/plat/system-reset.h b/arch/arm/plat-s5p/include/plat/system-reset.h
new file mode 100644
index 000000000000..f307f34e6422
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/system-reset.h
@@ -0,0 +1,31 @@
+/* linux/arch/arm/plat-s5p/include/plat/system-reset.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h
+ *
+ * S5P - System define for arch_reset()
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/watchdog-reset.h>
+
+void (*s5p_reset_hook)(void);
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* SWRESET support in s5p_reset_hook() */
+
+	if (s5p_reset_hook)
+		s5p_reset_hook();
+
+	/* Perform reset using Watchdog reset
+	 * if there is no s5p_reset_hook()
+	 */
+
+	arch_wdt_reset();
+}
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index f36cd3327025..752f1a645f9d 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -67,23 +67,23 @@ static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
 
 	switch (type) {
 	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S5P_EXTINT_RISEEDGE;
+		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
 		break;
 
 	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S5P_EXTINT_FALLEDGE;
+		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
 		break;
 
 	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S5P_EXTINT_BOTHEDGE;
+		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
 		break;
 
 	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S5P_EXTINT_LOWLEV;
+		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
 		break;
 
 	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S5P_EXTINT_HILEV;
+		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
 		break;
 
 	default:
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
new file mode 100644
index 000000000000..0e5dc8cbf5e3
--- /dev/null
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -0,0 +1,237 @@
+/* linux/arch/arm/plat-s5p/irq-gpioint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * Author: Kyungmin Park <kyungmin.park@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+
+#define S5P_GPIOREG(x)			(S5P_VA_GPIO + (x))
+
+#define GPIOINT_CON_OFFSET		0x700
+#define GPIOINT_MASK_OFFSET		0x900
+#define GPIOINT_PEND_OFFSET		0xA00
+
+static struct s3c_gpio_chip *irq_chips[S5P_GPIOINT_GROUP_MAXNR];
+
+static int s5p_gpioint_get_group(unsigned int irq)
+{
+	struct gpio_chip *chip = get_irq_data(irq);
+	struct s3c_gpio_chip *s3c_chip = container_of(chip,
+			struct s3c_gpio_chip, chip);
+	int group;
+
+	for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++)
+		if (s3c_chip == irq_chips[group])
+			break;
+
+	return group;
+}
+
+static int s5p_gpioint_get_offset(unsigned int irq)
+{
+	struct gpio_chip *chip = get_irq_data(irq);
+	struct s3c_gpio_chip *s3c_chip = container_of(chip,
+			struct s3c_gpio_chip, chip);
+
+	return irq - s3c_chip->irq_base;
+}
+
+static void s5p_gpioint_ack(unsigned int irq)
+{
+	int group, offset, pend_offset;
+	unsigned int value;
+
+	group = s5p_gpioint_get_group(irq);
+	offset = s5p_gpioint_get_offset(irq);
+	pend_offset = group << 2;
+
+	value = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset);
+}
+
+static void s5p_gpioint_mask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5p_gpioint_get_group(irq);
+	offset = s5p_gpioint_get_offset(irq);
+	mask_offset = group << 2;
+
+	value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+}
+
+static void s5p_gpioint_unmask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5p_gpioint_get_group(irq);
+	offset = s5p_gpioint_get_offset(irq);
+	mask_offset = group << 2;
+
+	value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+	value &= ~(1 << offset);
+	__raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset);
+}
+
+static void s5p_gpioint_mask_ack(unsigned int irq)
+{
+	s5p_gpioint_mask(irq);
+	s5p_gpioint_ack(irq);
+}
+
+static int s5p_gpioint_set_type(unsigned int irq, unsigned int type)
+{
+	int group, offset, con_offset;
+	unsigned int value;
+
+	group = s5p_gpioint_get_group(irq);
+	offset = s5p_gpioint_get_offset(irq);
+	con_offset = group << 2;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		type = S5P_IRQ_TYPE_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		type = S5P_IRQ_TYPE_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		type = S5P_IRQ_TYPE_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		type = S5P_IRQ_TYPE_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		type = S5P_IRQ_TYPE_LEVEL_LOW;
+		break;
+	case IRQ_TYPE_NONE:
+	default:
+		printk(KERN_WARNING "No irq type\n");
+		return -EINVAL;
+	}
+
+	value = __raw_readl(S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset);
+	value &= ~(0x7 << (offset * 0x4));
+	value |= (type << (offset * 0x4));
+	__raw_writel(value, S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset);
+
+	return 0;
+}
+
+struct irq_chip s5p_gpioint = {
+	.name		= "s5p_gpioint",
+	.ack		= s5p_gpioint_ack,
+	.mask		= s5p_gpioint_mask,
+	.mask_ack	= s5p_gpioint_mask_ack,
+	.unmask		= s5p_gpioint_unmask,
+	.set_type	= s5p_gpioint_set_type,
+};
+
+static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int group, offset, pend_offset, mask_offset;
+	int real_irq;
+	unsigned int pend, mask;
+
+	for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++) {
+		pend_offset = group << 2;
+		pend = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) +
+				pend_offset);
+		if (!pend)
+			continue;
+
+		mask_offset = group << 2;
+		mask = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) +
+				mask_offset);
+		pend &= ~mask;
+
+		for (offset = 0; offset < 8; offset++) {
+			if (pend & (1 << offset)) {
+				struct s3c_gpio_chip *chip = irq_chips[group];
+				if (chip) {
+					real_irq = chip->irq_base + offset;
+					generic_handle_irq(real_irq);
+				}
+			}
+		}
+	}
+}
+
+static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
+{
+	static int used_gpioint_groups = 0;
+	static bool handler_registered = 0;
+	int irq, group = chip->group;
+	int i;
+
+	if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
+		return -ENOMEM;
+
+	chip->irq_base = S5P_GPIOINT_BASE +
+			 used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE;
+	used_gpioint_groups++;
+
+	if (!handler_registered) {
+		set_irq_chained_handler(IRQ_GPIOINT, s5p_gpioint_handler);
+		handler_registered = 1;
+	}
+
+	irq_chips[group] = chip;
+	for (i = 0; i < chip->chip.ngpio; i++) {
+		irq = chip->irq_base + i;
+		set_irq_chip(irq, &s5p_gpioint);
+		set_irq_data(irq, &chip->chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+	return 0;
+}
+
+int __init s5p_register_gpio_interrupt(int pin)
+{
+	struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin);
+	int offset, group;
+	int ret;
+
+	if (!my_chip)
+		return -EINVAL;
+
+	offset = pin - my_chip->chip.base;
+	group = my_chip->group;
+
+	/* check if the group has been already registered */
+	if (my_chip->irq_base)
+		return my_chip->irq_base + offset;
+
+	/* register gpio group */
+	ret = s5p_gpioint_add(my_chip);
+	if (ret == 0) {
+		my_chip->chip.to_irq = samsung_gpiolib_to_irq;
+		printk(KERN_INFO "Registered interrupt support for gpio group %d.\n",
+		       group);
+		return my_chip->irq_base + offset;
+	}
+	return ret;
+}
diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c
new file mode 100644
index 000000000000..dc33b9ecda45
--- /dev/null
+++ b/arch/arm/plat-s5p/irq-pm.c
@@ -0,0 +1,93 @@
+/* linux/arch/arm/plat-s5p/irq-pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on arch/arm/plat-s3c24xx/irq-pm.c,
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+
+#include <plat/cpu.h>
+#include <plat/irqs.h>
+#include <plat/pm.h>
+#include <mach/map.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM,
+ * as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow	= 0x00000006L;
+unsigned long s3c_irqwake_eintallow	= 0xffffffffL;
+
+int s3c_irq_wake(unsigned int irqno, unsigned int state)
+{
+	unsigned long irqbit;
+
+	switch (irqno) {
+	case IRQ_RTC_TIC:
+	case IRQ_RTC_ALARM:
+		irqbit = 1 << (irqno + 1 - IRQ_RTC_ALARM);
+		if (!state)
+			s3c_irqwake_intmask |= irqbit;
+		else
+			s3c_irqwake_intmask &= ~irqbit;
+		break;
+	default:
+		return -ENOENT;
+	}
+	return 0;
+}
+
+static struct sleep_save eint_save[] = {
+	SAVE_ITEM(S5P_EINT_CON(0)),
+	SAVE_ITEM(S5P_EINT_CON(1)),
+	SAVE_ITEM(S5P_EINT_CON(2)),
+	SAVE_ITEM(S5P_EINT_CON(3)),
+
+	SAVE_ITEM(S5P_EINT_FLTCON(0)),
+	SAVE_ITEM(S5P_EINT_FLTCON(1)),
+	SAVE_ITEM(S5P_EINT_FLTCON(2)),
+	SAVE_ITEM(S5P_EINT_FLTCON(3)),
+	SAVE_ITEM(S5P_EINT_FLTCON(4)),
+	SAVE_ITEM(S5P_EINT_FLTCON(5)),
+	SAVE_ITEM(S5P_EINT_FLTCON(6)),
+	SAVE_ITEM(S5P_EINT_FLTCON(7)),
+
+	SAVE_ITEM(S5P_EINT_MASK(0)),
+	SAVE_ITEM(S5P_EINT_MASK(1)),
+	SAVE_ITEM(S5P_EINT_MASK(2)),
+	SAVE_ITEM(S5P_EINT_MASK(3)),
+};
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+	s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save));
+
+	return 0;
+}
+
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+	s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save));
+
+	return 0;
+}
+
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
index 25e1eb6de59e..5560b12035d1 100644
--- a/arch/arm/plat-s5p/irq.c
+++ b/arch/arm/plat-s5p/irq.c
@@ -56,11 +56,13 @@ static struct s3c_uart_irq uart_irqs[] = {
 
 void __init s5p_init_irq(u32 *vic, u32 num_vic)
 {
+#ifdef CONFIG_ARM_VIC
 	int irq;
 
 	/* initialize the VICs */
 	for (irq = 0; irq < num_vic; irq++)
 		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
+#endif
 
 	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
 	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c
new file mode 100644
index 000000000000..d592b6304b48
--- /dev/null
+++ b/arch/arm/plat-s5p/pm.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/plat-s5p/pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P Power Manager (Suspend-To-RAM) support
+ *
+ * Based on arch/arm/plat-s3c24xx/pm.c
+ * Copyright (c) 2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <plat/pm.h>
+
+#define PFX "s5p pm: "
+
+/* s3c_pm_check_resume_pin
+ *
+ * check to see if the pin is configured correctly for sleep mode, and
+ * make any necessary adjustments if it is not
+*/
+
+static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+{
+	/* nothing here yet */
+}
+
+/* s3c_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+void s3c_pm_configure_extint(void)
+{
+	/* nothing here yet */
+}
+
+void s3c_pm_restore_core(void)
+{
+	/* nothing here yet */
+}
+
+void s3c_pm_save_core(void)
+{
+	/* nothing here yet */
+}
+
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 2753fb3e4f73..dcd6eff4ee53 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -6,7 +6,7 @@
 
 config PLAT_SAMSUNG
 	bool
-	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
+	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
 	select NO_IOPORT
 	default y
 	help
@@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2
 	help
 	  Compile in platform device definitions for HSMMC channel 2
 
+config S3C_DEV_HSMMC3
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 3
+
 config S3C_DEV_HWMON
 	bool
 	help
@@ -175,6 +180,31 @@ config S3C_DEV_I2C2
 	help
 	  Compile in platform device definitions for I2C channel 2
 
+config S3C_DEV_I2C3
+	bool
+	help
+	  Compile in platform device definition for I2C controller 3
+
+config S3C_DEV_I2C4
+	bool
+	help
+	  Compile in platform device definition for I2C controller 4
+
+config S3C_DEV_I2C5
+	bool
+	help
+	  Compile in platform device definition for I2C controller 5
+
+config S3C_DEV_I2C6
+	bool
+	help
+	  Compile in platform device definition for I2C controller 6
+
+config S3C_DEV_I2C7
+	bool
+	help
+	  Compile in platform device definition for I2C controller 7
+
 config S3C_DEV_FB
 	bool
 	help
@@ -216,6 +246,11 @@ config SAMSUNG_DEV_ADC
 	help
 	  Compile in platform device definition for ADC controller
 
+config SAMSUNG_DEV_IDE
+	bool
+	help
+	  Compile in platform device definitions for IDE
+
 config S3C64XX_DEV_SPI
 	bool
 	help
@@ -227,6 +262,11 @@ config SAMSUNG_DEV_TS
 	help
 	    Common in platform device definitions for touchscreen device
 
+config SAMSUNG_DEV_KEYPAD
+	bool
+	help
+	  Compile in platform device definitions for keypad
+
 # DMA
 
 config S3C_DMA
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index b1d82cc5e716..afcce474af8e 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -12,7 +12,7 @@ obj-				:=
 # Objects we always build independent of SoC choice
 
 obj-y				+= init.o
-obj-y				+= time.o
+obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
 obj-y				+= clock.o
 obj-y				+= pwm-clock.o
 obj-y				+= gpio.o
@@ -30,13 +30,21 @@ obj-$(CONFIG_S3C_ADC)	+= adc.o
 
 # devices
 
+obj-y				+= platformdata.o
+
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
+obj-$(CONFIG_S3C_DEV_HSMMC3)	+= dev-hsmmc3.o
 obj-$(CONFIG_S3C_DEV_HWMON)	+= dev-hwmon.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_I2C2)	+= dev-i2c2.o
+obj-$(CONFIG_S3C_DEV_I2C3)	+= dev-i2c3.o
+obj-$(CONFIG_S3C_DEV_I2C4)	+= dev-i2c4.o
+obj-$(CONFIG_S3C_DEV_I2C5)	+= dev-i2c5.o
+obj-$(CONFIG_S3C_DEV_I2C6)	+= dev-i2c6.o
+obj-$(CONFIG_S3C_DEV_I2C7)	+= dev-i2c7.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-y				+= dev-uart.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
@@ -47,7 +55,9 @@ obj-$(CONFIG_S3C_DEV_ONENAND)	+= dev-onenand.o
 obj-$(CONFIG_S3C_DEV_RTC)	+= dev-rtc.o
 
 obj-$(CONFIG_SAMSUNG_DEV_ADC)	+= dev-adc.o
+obj-$(CONFIG_SAMSUNG_DEV_IDE)	+= dev-ide.o
 obj-$(CONFIG_SAMSUNG_DEV_TS)	+= dev-ts.o
+obj-$(CONFIG_SAMSUNG_DEV_KEYPAD)	+= dev-keypad.o
 
 # DMA support
 
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 04d9521ddc9f..e8f2be2d67f2 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -435,7 +435,6 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
 static int s3c_adc_resume(struct platform_device *pdev)
 {
 	struct adc_device *adc = platform_get_drvdata(pdev);
-	unsigned long flags;
 
 	clk_enable(adc->clk);
 	enable_irq(adc->irq);
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 8bf79f3efdfb..e8d20b0bc50e 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -48,6 +48,9 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 
+#include <linux/serial_core.h>
+#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
+
 /* clock information */
 
 static LIST_HEAD(clocks);
@@ -65,6 +68,28 @@ static int clk_null_enable(struct clk *clk, int enable)
 	return 0;
 }
 
+static int dev_is_s3c_uart(struct device *dev)
+{
+	struct platform_device **pdev = s3c24xx_uart_devs;
+	int i;
+	for (i = 0; i < ARRAY_SIZE(s3c24xx_uart_devs); i++, pdev++)
+		if (*pdev && dev == &(*pdev)->dev)
+			return 1;
+	return 0;
+}
+
+/*
+ * Serial drivers call get_clock() very early, before platform bus
+ * has been set up, this requires a special check to let them get
+ * a proper clock
+ */
+
+static int dev_is_platform_device(struct device *dev)
+{
+	return dev->bus == &platform_bus_type ||
+	       (dev->bus == NULL && dev_is_s3c_uart(dev));
+}
+
 /* Clock API calls */
 
 struct clk *clk_get(struct device *dev, const char *id)
@@ -73,7 +98,7 @@ struct clk *clk_get(struct device *dev, const char *id)
 	struct clk *clk = ERR_PTR(-ENOENT);
 	int idno;
 
-	if (dev == NULL || dev->bus != &platform_bus_type)
+	if (dev == NULL || !dev_is_platform_device(dev))
 		idno = -1;
 	else
 		idno = to_platform_device(dev)->id;
@@ -391,7 +416,7 @@ void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
 		(clkp->enable)(clkp, 0);
 }
 
-/* initalise all the clocks */
+/* initialise all the clocks */
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)
 {
diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index 4c05b39810e2..db7a65c7f127 100644
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
@@ -41,6 +41,7 @@ struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = {
 	.max_width	= 4,
 	.host_caps	= (MMC_CAP_4_BIT_DATA |
 			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
 };
 
 struct platform_device s3c_device_hsmmc0 = {
@@ -59,10 +60,20 @@ void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
 {
 	struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
 
-	set->max_width = pd->max_width;
+	set->cd_type = pd->cd_type;
+	set->ext_cd_init = pd->ext_cd_init;
+	set->ext_cd_cleanup = pd->ext_cd_cleanup;
+	set->ext_cd_gpio = pd->ext_cd_gpio;
+	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
 
+	if (pd->max_width)
+		set->max_width = pd->max_width;
 	if (pd->cfg_gpio)
 		set->cfg_gpio = pd->cfg_gpio;
 	if (pd->cfg_card)
 		set->cfg_card = pd->cfg_card;
+	if (pd->host_caps)
+		set->host_caps |= pd->host_caps;
+	if (pd->clk_type)
+		set->clk_type = pd->clk_type;
 }
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index e49bc4cd0ee6..2497321f08d7 100644
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
@@ -41,6 +41,7 @@ struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = {
 	.max_width	= 4,
 	.host_caps	= (MMC_CAP_4_BIT_DATA |
 			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
 };
 
 struct platform_device s3c_device_hsmmc1 = {
@@ -59,10 +60,20 @@ void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
 {
 	struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
 
-	set->max_width = pd->max_width;
+	set->cd_type = pd->cd_type;
+	set->ext_cd_init = pd->ext_cd_init;
+	set->ext_cd_cleanup = pd->ext_cd_cleanup;
+	set->ext_cd_gpio = pd->ext_cd_gpio;
+	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
 
+	if (pd->max_width)
+		set->max_width = pd->max_width;
 	if (pd->cfg_gpio)
 		set->cfg_gpio = pd->cfg_gpio;
 	if (pd->cfg_card)
 		set->cfg_card = pd->cfg_card;
+	if (pd->host_caps)
+		set->host_caps |= pd->host_caps;
+	if (pd->clk_type)
+		set->clk_type = pd->clk_type;
 }
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index 824580bc0e06..f60aedba417c 100644
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
@@ -42,6 +42,7 @@ struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
 	.max_width	= 4,
 	.host_caps	= (MMC_CAP_4_BIT_DATA |
 			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
 };
 
 struct platform_device s3c_device_hsmmc2 = {
@@ -60,10 +61,20 @@ void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
 {
 	struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
 
-	set->max_width = pd->max_width;
+	set->cd_type = pd->cd_type;
+	set->ext_cd_init = pd->ext_cd_init;
+	set->ext_cd_cleanup = pd->ext_cd_cleanup;
+	set->ext_cd_gpio = pd->ext_cd_gpio;
+	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
 
+	if (pd->max_width)
+		set->max_width = pd->max_width;
 	if (pd->cfg_gpio)
 		set->cfg_gpio = pd->cfg_gpio;
 	if (pd->cfg_card)
 		set->cfg_card = pd->cfg_card;
+	if (pd->host_caps)
+		set->host_caps |= pd->host_caps;
+	if (pd->clk_type)
+		set->clk_type = pd->clk_type;
 }
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
new file mode 100644
index 000000000000..ede776f20e62
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-hsmmc3.c
@@ -0,0 +1,83 @@
+/* linux/arch/arm/plat-samsung/dev-hsmmc3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Based on arch/arm/plat-samsung/dev-hsmmc1.c
+ *
+ * Samsung device definition for hsmmc device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+
+#define S3C_SZ_HSMMC	(0x1000)
+
+static struct resource s3c_hsmmc3_resource[] = {
+	[0] = {
+		.start	= S3C_PA_HSMMC3,
+		.end	= S3C_PA_HSMMC3 + S3C_SZ_HSMMC - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_HSMMC3,
+		.end	= IRQ_HSMMC3,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc3_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.clk_type	= S3C_SDHCI_CLK_DIV_INTERNAL,
+};
+
+struct platform_device s3c_device_hsmmc3 = {
+	.name		= "s3c-sdhci",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc3_resource),
+	.resource	= s3c_hsmmc3_resource,
+	.dev		= {
+		.dma_mask		= &s3c_device_hsmmc3_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+		.platform_data		= &s3c_hsmmc3_def_platdata,
+	},
+};
+
+void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
+
+	set->cd_type = pd->cd_type;
+	set->ext_cd_init = pd->ext_cd_init;
+	set->ext_cd_cleanup = pd->ext_cd_cleanup;
+	set->ext_cd_gpio = pd->ext_cd_gpio;
+	set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+	if (pd->max_width)
+		set->max_width = pd->max_width;
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+	if (pd->host_caps)
+		set->host_caps |= pd->host_caps;
+	if (pd->clk_type)
+		set->clk_type = pd->clk_type;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c
index 07036dee09e7..ff4ba69b6830 100644
--- a/arch/arm/plat-samsung/dev-i2c2.c
+++ b/arch/arm/plat-samsung/dev-i2c2.c
@@ -32,8 +32,8 @@ static struct resource s3c_i2c_resource[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = IRQ_CAN0,
-		.end   = IRQ_CAN0,
+		.start = IRQ_IIC2,
+		.end   = IRQ_IIC2,
 		.flags = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/plat-samsung/dev-i2c3.c b/arch/arm/plat-samsung/dev-i2c3.c
new file mode 100644
index 000000000000..8586a10014b7
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c3.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/dev-i2c3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start	= S3C_PA_IIC3,
+		.end	= S3C_PA_IIC3 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IIC3,
+		.end	= IRQ_IIC3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c3 = {
+	.name		= "s3c2440-i2c",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(s3c_i2c_resource),
+	.resource	= s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data3 __initdata = {
+	.flags		= 0,
+	.bus_num	= 3,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data3;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c3_cfg_gpio;
+
+	s3c_device_i2c3.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c4.c b/arch/arm/plat-samsung/dev-i2c4.c
new file mode 100644
index 000000000000..df2159e2daa6
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c4.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/dev-i2c4.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start	= S3C_PA_IIC4,
+		.end	= S3C_PA_IIC4 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IIC4,
+		.end	= IRQ_IIC4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c4 = {
+	.name		= "s3c2440-i2c",
+	.id		= 4,
+	.num_resources	= ARRAY_SIZE(s3c_i2c_resource),
+	.resource	= s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data4 __initdata = {
+	.flags		= 0,
+	.bus_num	= 4,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data4;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c4_cfg_gpio;
+
+	s3c_device_i2c4.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c5.c b/arch/arm/plat-samsung/dev-i2c5.c
new file mode 100644
index 000000000000..0499c2c3877b
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c5.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/dev-i2c3.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start	= S3C_PA_IIC5,
+		.end	= S3C_PA_IIC5 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IIC5,
+		.end	= IRQ_IIC5,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c5 = {
+	.name		= "s3c2440-i2c",
+	.id		= 5,
+	.num_resources	= ARRAY_SIZE(s3c_i2c_resource),
+	.resource	= s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data5 __initdata = {
+	.flags		= 0,
+	.bus_num	= 5,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data5;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c5_cfg_gpio;
+
+	s3c_device_i2c5.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c6.c b/arch/arm/plat-samsung/dev-i2c6.c
new file mode 100644
index 000000000000..4083108908a8
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c6.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/dev-i2c6.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 6
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start	= S3C_PA_IIC6,
+		.end	= S3C_PA_IIC6 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IIC6,
+		.end	= IRQ_IIC6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c6 = {
+	.name		= "s3c2440-i2c",
+	.id		= 6,
+	.num_resources	= ARRAY_SIZE(s3c_i2c_resource),
+	.resource	= s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data6 __initdata = {
+	.flags		= 0,
+	.bus_num	= 6,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data6;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c6_cfg_gpio;
+
+	s3c_device_i2c6.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-i2c7.c b/arch/arm/plat-samsung/dev-i2c7.c
new file mode 100644
index 000000000000..1182451d7dce
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c7.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-samsung/dev-i2c7.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5P series device definition for i2c device 7
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start	= S3C_PA_IIC7,
+		.end	= S3C_PA_IIC7 + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_IIC7,
+		.end	= IRQ_IIC7,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c7 = {
+	.name		= "s3c2440-i2c",
+	.id		= 7,
+	.num_resources	= ARRAY_SIZE(s3c_i2c_resource),
+	.resource	= s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data7 __initdata = {
+	.flags		= 0,
+	.bus_num	= 7,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data7;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c7_cfg_gpio;
+
+	s3c_device_i2c7.dev.platform_data = npd;
+}
diff --git a/arch/arm/plat-samsung/dev-ide.c b/arch/arm/plat-samsung/dev-ide.c
new file mode 100644
index 000000000000..b497982795a7
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-ide.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-samsung/dev-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA device definition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/ata.h>
+#include <plat/devs.h>
+
+static struct resource s3c_cfcon_resource[] = {
+	[0] = {
+		.start	= SAMSUNG_PA_CFCON,
+		.end	= SAMSUNG_PA_CFCON + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_CFCON,
+		.end	= IRQ_CFCON,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_cfcon = {
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_cfcon_resource),
+	.resource	= s3c_cfcon_resource,
+};
+
+void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+{
+	s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
+			 &s3c_device_cfcon);
+}
diff --git a/arch/arm/plat-samsung/dev-keypad.c b/arch/arm/plat-samsung/dev-keypad.c
new file mode 100644
index 000000000000..677c2d731b65
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-keypad.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/arm/plat-samsung/dev-keypad.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/keypad.h>
+
+static struct resource samsung_keypad_resources[] = {
+	[0] = {
+		.start	= SAMSUNG_PA_KEYPAD,
+		.end	= SAMSUNG_PA_KEYPAD + 0x20 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_KEYPAD,
+		.end	= IRQ_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device samsung_device_keypad = {
+	.name		= "samsung-keypad",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(samsung_keypad_resources),
+	.resource	= samsung_keypad_resources,
+};
+
+void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
+{
+	struct samsung_keypad_platdata *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(struct samsung_keypad_platdata),
+			&samsung_device_keypad);
+
+	if (!npd->cfg_gpio)
+		npd->cfg_gpio = samsung_keypad_cfg_gpio;
+}
diff --git a/arch/arm/plat-samsung/dev-wdt.c b/arch/arm/plat-samsung/dev-wdt.c
index 5efca87cddbd..019b5b8cf14c 100644
--- a/arch/arm/plat-samsung/dev-wdt.c
+++ b/arch/arm/plat-samsung/dev-wdt.c
@@ -21,7 +21,7 @@
 static struct resource s3c_wdt_resource[] = {
 	[0] = {
 		.start	= S3C_PA_WDT,
-		.end	= S3C_PA_WDT + SZ_1M - 1,
+		.end	= S3C_PA_WDT + SZ_1K,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index 57b68a50f45e..b732b773b9af 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -41,6 +41,37 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
 }
 EXPORT_SYMBOL(s3c_gpio_cfgpin);
 
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg, s3c_gpio_pull_t pull)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		s3c_gpio_setpull(start, pull);
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
 unsigned s3c_gpio_getcfg(unsigned int pin)
 {
 	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
@@ -80,6 +111,25 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
 }
 EXPORT_SYMBOL(s3c_gpio_setpull);
 
+s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	u32 pup = 0;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		s3c_gpio_lock(chip, flags);
+		pup = s3c_gpio_do_getpull(chip, offset);
+		s3c_gpio_unlock(chip, flags);
+	}
+
+	return (__force s3c_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
 #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
 int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
 			      unsigned int off, unsigned int cfg)
@@ -273,13 +323,13 @@ s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
 	if (!chip)
 		return -EINVAL;
 
-	off = chip->chip.base - pin;
+	off = pin - chip->chip.base;
 	shift = off * 2;
 	reg = chip->base + 0x0C;
 
 	drvstr = __raw_readl(reg);
-	drvstr = 0xffff & (0x3 << shift);
 	drvstr = drvstr >> shift;
+	drvstr &= 0x3;
 
 	return (__force s5p_gpio_drvstr_t)drvstr;
 }
@@ -296,11 +346,12 @@ int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
 	if (!chip)
 		return -EINVAL;
 
-	off = chip->chip.base - pin;
+	off = pin - chip->chip.base;
 	shift = off * 2;
 	reg = chip->base + 0x0C;
 
 	tmp = __raw_readl(reg);
+	tmp &= ~(0x3 << shift);
 	tmp |= drvstr << shift;
 
 	__raw_writel(tmp, reg);
diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c
index b83a83351cea..7743c4b8b2fb 100644
--- a/arch/arm/plat-samsung/gpio.c
+++ b/arch/arm/plat-samsung/gpio.c
@@ -157,3 +157,11 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip)
 	if (ret >= 0)
 		s3c_gpiolib_track(chip);
 }
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	struct s3c_gpio_chip *s3c_chip = container_of(chip,
+			struct s3c_gpio_chip, chip);
+
+	return s3c_chip->irq_base + offset;
+}
diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c
index 8a8ba8bc1d96..c354089254fc 100644
--- a/arch/arm/plat-samsung/gpiolib.c
+++ b/arch/arm/plat-samsung/gpiolib.c
@@ -18,7 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <mach/gpio.h>
+#include <linux/gpio.h>
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
diff --git a/arch/arm/plat-samsung/include/plat/adc-core.h b/arch/arm/plat-samsung/include/plat/adc-core.h
new file mode 100644
index 000000000000..a281568d5856
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/adc-core.h
@@ -0,0 +1,28 @@
+/* linux/arch/arm/plat-samsung/include/plat/adc-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Samsung ADC Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ADC_CORE_H
+#define __ASM_PLAT_ADC_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_adc_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_ADC
+	s3c_device_adc.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ADC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h
index e8382c7be10b..b258a08de591 100644
--- a/arch/arm/plat-samsung/include/plat/adc.h
+++ b/arch/arm/plat-samsung/include/plat/adc.h
@@ -1,7 +1,7 @@
 /* arch/arm/plat-samsung/include/plat/adc.h
  *
  * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simnte.co.uk/
+ *	http://armlinux.simtec.co.uk/	
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C ADC driver information
diff --git a/arch/arm/plat-samsung/include/plat/ata-core.h b/arch/arm/plat-samsung/include/plat/ata-core.h
new file mode 100644
index 000000000000..f5a4ec7141b1
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/ata-core.h
@@ -0,0 +1,28 @@
+/* linux/arch/arm/plat-samsung/include/plat/ata-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_CORE_H
+#define __ASM_PLAT_ATA_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+*/
+
+/* re-define device name depending on support. */
+static inline void s3c_cfcon_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_IDE
+	s3c_device_cfcon.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_ATA_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/ata.h b/arch/arm/plat-samsung/include/plat/ata.h
new file mode 100644
index 000000000000..2a3855a8372a
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/ata.h
@@ -0,0 +1,36 @@
+/* linux/arch/arm/plat-samsung/include/plat/ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_ATA_H
+#define __ASM_PLAT_ATA_H __FILE__
+
+/**
+ * struct s3c_ide_platdata - S3C IDE driver platform data.
+ * @setup_gpio: Setup the external GPIO pins to the right state for data
+ * transfer in true-ide mode.
+ */
+struct s3c_ide_platdata {
+	void (*setup_gpio)(void);
+};
+
+/*
+ * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver.
+ * @pdata: Platform data for IDE driver.
+ */
+extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata);
+
+/* architecture-specific IDE configuration */
+extern void s3c64xx_ide_setup_gpio(void);
+extern void s5pc100_ide_setup_gpio(void);
+extern void s5pv210_ide_setup_gpio(void);
+
+#endif /*__ASM_PLAT_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
index e32f9edfd4b7..7712ff6336f4 100644
--- a/arch/arm/plat-samsung/include/plat/audio.h
+++ b/arch/arm/plat-samsung/include/plat/audio.h
@@ -16,6 +16,15 @@
 #define S3C64XX_AC97_GPE  1
 extern void s3c64xx_ac97_setup_gpio(int);
 
+/*
+ * The machine init code calls s5p*_spdif_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for S/PDIF pins
+ */
+#define S5PC100_SPDIF_GPD  0
+#define S5PC100_SPDIF_GPG3 1
+extern void s5pc100_spdif_setup_gpio(int);
+
 /**
  * struct s3c_audio_pdata - common platform data for audio device drivers
  * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 6412933d6fbb..9addb3dfb4bc 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -79,7 +79,7 @@ extern struct sysdev_class s3c2442_sysclass;
 extern struct sysdev_class s3c2443_sysclass;
 extern struct sysdev_class s3c6410_sysclass;
 extern struct sysdev_class s3c64xx_sysclass;
-extern struct sysdev_class s5p6440_sysclass;
+extern struct sysdev_class s5p64x0_sysclass;
 extern struct sysdev_class s5p6442_sysclass;
 extern struct sysdev_class s5pv210_sysclass;
 
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index e6144e4b9118..2d82a6cb1444 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -32,6 +32,8 @@ extern struct platform_device s3c64xx_device_iisv4;
 extern struct platform_device s3c64xx_device_spi0;
 extern struct platform_device s3c64xx_device_spi1;
 
+extern struct platform_device s3c_device_pcm;
+
 extern struct platform_device s3c64xx_device_pcm0;
 extern struct platform_device s3c64xx_device_pcm1;
 
@@ -46,6 +48,11 @@ extern struct platform_device s3c_device_wdt;
 extern struct platform_device s3c_device_i2c0;
 extern struct platform_device s3c_device_i2c1;
 extern struct platform_device s3c_device_i2c2;
+extern struct platform_device s3c_device_i2c3;
+extern struct platform_device s3c_device_i2c4;
+extern struct platform_device s3c_device_i2c5;
+extern struct platform_device s3c_device_i2c6;
+extern struct platform_device s3c_device_i2c7;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
@@ -54,6 +61,8 @@ extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
 extern struct platform_device s3c_device_hsmmc2;
+extern struct platform_device s3c_device_hsmmc3;
+extern struct platform_device s3c_device_cfcon;
 
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
@@ -65,13 +74,15 @@ extern struct platform_device s5pv210_device_spi0;
 extern struct platform_device s5pv210_device_spi1;
 extern struct platform_device s5p6440_device_spi0;
 extern struct platform_device s5p6440_device_spi1;
+extern struct platform_device s5p6450_device_spi0;
+extern struct platform_device s5p6450_device_spi1;
 
 extern struct platform_device s3c_device_hwmon;
 
 extern struct platform_device s3c_device_nand;
 extern struct platform_device s3c_device_onenand;
 extern struct platform_device s3c64xx_device_onenand1;
-extern struct platform_device s5pc110_device_onenand;
+extern struct platform_device s5p_device_onenand;
 
 extern struct platform_device s3c_device_usbgadget;
 extern struct platform_device s3c_device_usb_hsotg;
@@ -83,6 +94,7 @@ extern struct platform_device s5pv210_device_pcm2;
 extern struct platform_device s5pv210_device_iis0;
 extern struct platform_device s5pv210_device_iis1;
 extern struct platform_device s5pv210_device_iis2;
+extern struct platform_device s5pv210_device_spdif;
 
 extern struct platform_device s5p6442_device_pcm0;
 extern struct platform_device s5p6442_device_pcm1;
@@ -93,12 +105,22 @@ extern struct platform_device s5p6442_device_spi;
 extern struct platform_device s5p6440_device_pcm;
 extern struct platform_device s5p6440_device_iis;
 
+extern struct platform_device s5p6450_device_iis0;
+extern struct platform_device s5p6450_device_pcm0;
+
 extern struct platform_device s5pc100_device_ac97;
 extern struct platform_device s5pc100_device_pcm0;
 extern struct platform_device s5pc100_device_pcm1;
 extern struct platform_device s5pc100_device_iis0;
 extern struct platform_device s5pc100_device_iis1;
 extern struct platform_device s5pc100_device_iis2;
+extern struct platform_device s5pc100_device_spdif;
+
+extern struct platform_device samsung_device_keypad;
+
+extern struct platform_device s5p_device_fimc0;
+extern struct platform_device s5p_device_fimc1;
+extern struct platform_device s5p_device_fimc2;
 
 /* s3c2440 specific devices */
 
@@ -108,3 +130,15 @@ extern struct platform_device s3c_device_camif;
 extern struct platform_device s3c_device_ac97;
 
 #endif
+
+/**
+ * s3c_set_platdata() - helper for setting platform data
+ * @pd: The default platform data for this device.
+ * @pdsize: The size of the platform data.
+ * @pdev: Pointer to the device to fill in.
+ *
+ * This helper replaces a number of calls that copy and then set the
+ * platform data of the device.
+ */
+extern void *s3c_set_platdata(void *pd, size_t pdsize,
+			      struct platform_device *pdev);
diff --git a/arch/arm/plat-samsung/include/plat/fb-core.h b/arch/arm/plat-samsung/include/plat/fb-core.h
new file mode 100644
index 000000000000..bca383efcf6d
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/fb-core.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/plat-samsung/include/plat/fb-core.h
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *	Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Samsung framebuffer driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PLAT_FB_CORE_H
+#define __ASM_PLAT_FB_CORE_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name depending on support. */
+static inline void s3c_fb_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_FB
+	s3c_device_fb.name = name;
+#endif
+}
+
+#endif /* __ASM_PLAT_FB_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 27d3b497b55b..cb3ca3adc685 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -42,6 +42,7 @@ struct s3c_fb_pd_win {
  * @setup_gpio: Setup the external GPIO pins to the right state to transfer
  *		the data from the display system to the connected display
  *		device.
+ * @default_win: default window layer number to be used for UI layer.
  * @vidcon0: The base vidcon0 values to control the panel data format.
  * @vidcon1: The base vidcon1 values to control the panel data output.
  * @win: The setup data for each hardware window, or NULL for unused.
@@ -58,6 +59,8 @@ struct s3c_fb_platdata {
 
 	struct s3c_fb_pd_win	*win[S3C_FB_MAX_WIN];
 
+	u32			 default_win;
+
 	u32			 vidcon0;
 	u32			 vidcon1;
 };
diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h
new file mode 100644
index 000000000000..81a3bfeeccad
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/fimc-core.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-samsung/include/plat/fimc-core.h
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ *	Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Samsung camera interface driver core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_FIMC_CORE_H
+#define __ASM_PLAT_FIMC_CORE_H __FILE__
+
+/*
+ * These functions are only for use with the core support code, such as
+ * the CPU-specific initialization code.
+ */
+
+/* Re-define device name to differentiate the subsystem in various SoCs. */
+static inline void s3c_fimc_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S5P_DEV_FIMC0
+	case 0:
+		s5p_device_fimc0.name = name;
+		break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC1
+	case 1:
+		s5p_device_fimc1.name = name;
+		break;
+#endif
+#ifdef CONFIG_S5P_DEV_FIMC2
+	case 2:
+		s5p_device_fimc2.name = name;
+		break;
+#endif
+	}
+}
+
+#endif /* __ASM_PLAT_FIMC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 3e21c75feefa..8fd65d8b5863 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -42,6 +42,12 @@ static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
 	return (chip->config->set_pull)(chip, off, pull);
 }
 
+static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip,
+						  unsigned int off)
+{
+	return chip->config->get_pull(chip, off);
+}
+
 /**
  * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
  * @chip: The gpio chip that is being configured.
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index db4112c6f2be..e4b5cf126fa9 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -108,6 +108,19 @@ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
  */
 extern unsigned s3c_gpio_getcfg(unsigned int pin);
 
+/**
+ * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
+ * @start: The pin number to start at
+ * @nr: The number of pins to configure from @start.
+ * @cfg: The configuration for the pin's function
+ *
+ * Call s3c_gpio_cfgpin() for the @nr pins starting at @start.
+ *
+ * @sa s3c_gpio_cfgpin.
+ */
+extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+				 unsigned int cfg);
+
 /* Define values for the pull-{up,down} available for each gpio pin.
  *
  * These values control the state of the weak pull-{up,down} resistors
@@ -140,15 +153,40 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
 */
 extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
 
+/* configure `all` aspects of an gpio */
+
+/**
+ * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull.
+ * @start: The gpio number to start at.
+ * @nr: The number of gpio to configure from @start.
+ * @cfg: The configuration to use
+ * @pull: The pull setting to use.
+ *
+ * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting
+ * @gpio and running for @size.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_cfgpin_range
+ */
+extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+				 unsigned int cfg, s3c_gpio_pull_t pull);
+
+static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
+					   unsigned int cfg)
+{
+	return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
+}
+
 /* Define values for the drvstr available for each gpio pin.
  *
  * These values control the value of the output signal driver strength,
- * configurable on most pins on the S5C series.
+ * configurable on most pins on the S5P series.
  */
-#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x00)
-#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x01)
-#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x10)
-#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x11)
+#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x0)
+#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x2)
+#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x1)
+#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x3)
 
 /**
  * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
@@ -169,4 +207,22 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
 */
 extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
 
+/**
+ * s5p_register_gpio_interrupt() - register interrupt support for a gpio group
+ * @pin: The pin number from the group to be registered
+ *
+ * This function registers gpio interrupt support for the group that the
+ * specified pin belongs to.
+ *
+ * The total number of gpio pins is quite large ob s5p series. Registering
+ * irq support for all of them would be a resource waste. Because of that the
+ * interrupt support for standard gpio pins is registered dynamically.
+ *
+ * It will return the irq number of the interrupt that has been registered
+ * or -ENOMEM if no more gpio interrupts can be registered. It is allowed
+ * to call this function more than once for the same gpio group (the group
+ * will be registered only once).
+ */
+extern int s5p_register_gpio_interrupt(int pin);
+
 #endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index e358c7da8480..13a22b8861ef 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -43,6 +43,8 @@ struct s3c_gpio_cfg;
  * struct s3c_gpio_chip - wrapper for specific implementation of gpio
  * @chip: The chip structure to be exported via gpiolib.
  * @base: The base pointer to the gpio configuration registers.
+ * @group: The group register number for gpio interrupt support.
+ * @irq_base: The base irq number.
  * @config: special function and pull-resistor control information.
  * @lock: Lock for exclusive access to this gpio bank.
  * @pm_save: Save information for suspend/resume support.
@@ -63,6 +65,8 @@ struct s3c_gpio_chip {
 	struct s3c_gpio_cfg	*config;
 	struct s3c_gpio_pm	*pm;
 	void __iomem		*base;
+	int			irq_base;
+	int			group;
 	spinlock_t		 lock;
 #ifdef CONFIG_PM
 	u32			pm_save[4];
@@ -118,6 +122,17 @@ extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
 extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
 extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
 
+
+/**
+ * samsung_gpiolib_to_irq - convert gpio pin to irq number
+ * @chip: The gpio chip that the pin belongs to.
+ * @offset: The offset of the pin in the chip.
+ *
+ * This helper returns the irq number calculated from the chip->irq_base and
+ * the provided offset.
+ */
+extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
+
 /* exported for core SoC support to change */
 extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default;
 
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
index 133308bf595d..1543da8f85c1 100644
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ b/arch/arm/plat-samsung/include/plat/iic.h
@@ -55,10 +55,20 @@ struct s3c2410_platform_i2c {
 extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
 
 /* defined by architecture to configure gpio */
 extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
 extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
 extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
 
 #endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/keypad-core.h b/arch/arm/plat-samsung/include/plat/keypad-core.h
new file mode 100644
index 000000000000..d513e1b3a31e
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/keypad-core.h
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/arm/plat-samsung/include/plat/keypad-core.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Samsung keypad controller core function
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_KEYPAD_CORE_H
+#define __ASM_ARCH_KEYPAD_CORE_H
+
+/* These function are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void samsung_keypad_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
+	samsung_device_keypad.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_KEYPAD_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h
new file mode 100644
index 000000000000..b59a6483cd8a
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/keypad.h
@@ -0,0 +1,56 @@
+/*
+ * Samsung Platform - Keypad platform data definitions
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_KEYPAD_H
+#define __PLAT_SAMSUNG_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+#define SAMSUNG_MAX_ROWS	8
+#define SAMSUNG_MAX_COLS	8
+
+/**
+ * struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
+ * @keymap_data: pointer to &matrix_keymap_data.
+ * @rows: number of keypad row supported.
+ * @cols: number of keypad col supported.
+ * @no_autorepeat: disable key autorepeat.
+ * @wakeup: controls whether the device should be set up as wakeup source.
+ * @cfg_gpio: configure the GPIO.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio.
+ */
+struct samsung_keypad_platdata {
+	const struct matrix_keymap_data	*keymap_data;
+	unsigned int rows;
+	unsigned int cols;
+	bool no_autorepeat;
+	bool wakeup;
+
+	void (*cfg_gpio)(unsigned int rows, unsigned int cols);
+};
+
+/**
+ * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with Samsung Keypad device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
+
+/* defined by architecture to configure gpio. */
+extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
+
+#endif /* __PLAT_SAMSUNG_KEYPAD_H */
diff --git a/arch/arm/plat-samsung/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h
index 250be311c85b..3ffac4d2e4f0 100644
--- a/arch/arm/plat-samsung/include/plat/map-base.h
+++ b/arch/arm/plat-samsung/include/plat/map-base.h
@@ -14,7 +14,7 @@
 #ifndef __ASM_PLAT_MAP_H
 #define __ASM_PLAT_MAP_H __FILE__
 
-/* Fit all our registers in at 0xF4000000 upwards, trying to use as
+/* Fit all our registers in at 0xF6000000 upwards, trying to use as
  * little of the VA space as possible so vmalloc and friends have a
  * better chance of getting memory.
  *
@@ -22,7 +22,7 @@
  * an single MOVS instruction (ie, only 8 bits of set data)
  */
 
-#define S3C_ADDR_BASE	(0xF4000000)
+#define S3C_ADDR_BASE	0xF6000000
 
 #ifndef __ASSEMBLY__
 #define S3C_ADDR(x)	((void __iomem __force *)S3C_ADDR_BASE + (x))
diff --git a/arch/arm/plat-samsung/include/plat/nand-core.h b/arch/arm/plat-samsung/include/plat/nand-core.h
new file mode 100644
index 000000000000..6de20789a95e
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/nand-core.h
@@ -0,0 +1,28 @@
+/* arch/arm/plat-samsung/include/plat/nand-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S3C -  Nand Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_NAND_CORE_H
+#define __ASM_ARCH_NAND_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_nand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_NAND
+	s3c_device_nand.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_NAND_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-ata.h b/arch/arm/plat-samsung/include/plat/regs-ata.h
new file mode 100644
index 000000000000..f5df92fdae26
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-ata.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/plat-samsung/include/plat/regs-ata.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CF-ATA register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_REGS_ATA_H
+#define __ASM_PLAT_REGS_ATA_H __FILE__
+
+#define S3C_CFATA_REG(x)	(x)
+
+#define S3C_CFATA_MUX		S3C_CFATA_REG(0x0)
+
+#define S3C_ATA_CTRL		S3C_CFATA_REG(0x0)
+#define S3C_ATA_STATUS		S3C_CFATA_REG(0x4)
+#define S3C_ATA_CMD		S3C_CFATA_REG(0x8)
+#define S3C_ATA_SWRST		S3C_CFATA_REG(0xc)
+#define S3C_ATA_IRQ		S3C_CFATA_REG(0x10)
+#define S3C_ATA_IRQ_MSK		S3C_CFATA_REG(0x14)
+#define S3C_ATA_CFG		S3C_CFATA_REG(0x18)
+
+#define S3C_ATA_MDMA_TIME	S3C_CFATA_REG(0x28)
+#define S3C_ATA_PIO_TIME	S3C_CFATA_REG(0x2c)
+#define S3C_ATA_UDMA_TIME	S3C_CFATA_REG(0x30)
+#define S3C_ATA_XFR_NUM		S3C_CFATA_REG(0x34)
+#define S3C_ATA_XFR_CNT		S3C_CFATA_REG(0x38)
+#define S3C_ATA_TBUF_START	S3C_CFATA_REG(0x3c)
+#define S3C_ATA_TBUF_SIZE	S3C_CFATA_REG(0x40)
+#define S3C_ATA_SBUF_START	S3C_CFATA_REG(0x44)
+#define S3C_ATA_SBUF_SIZE	S3C_CFATA_REG(0x48)
+#define S3C_ATA_CADR_TBUF	S3C_CFATA_REG(0x4c)
+#define S3C_ATA_CADR_SBUF	S3C_CFATA_REG(0x50)
+#define S3C_ATA_PIO_DTR		S3C_CFATA_REG(0x54)
+#define S3C_ATA_PIO_FED		S3C_CFATA_REG(0x58)
+#define S3C_ATA_PIO_SCR		S3C_CFATA_REG(0x5c)
+#define S3C_ATA_PIO_LLR		S3C_CFATA_REG(0x60)
+#define S3C_ATA_PIO_LMR		S3C_CFATA_REG(0x64)
+#define S3C_ATA_PIO_LHR		S3C_CFATA_REG(0x68)
+#define S3C_ATA_PIO_DVR		S3C_CFATA_REG(0x6c)
+#define S3C_ATA_PIO_CSD		S3C_CFATA_REG(0x70)
+#define S3C_ATA_PIO_DAD		S3C_CFATA_REG(0x74)
+#define S3C_ATA_PIO_READY	S3C_CFATA_REG(0x78)
+#define S3C_ATA_PIO_RDATA	S3C_CFATA_REG(0x7c)
+
+#define S3C_CFATA_MUX_TRUEIDE	0x01
+
+#define S3C_ATA_CFG_SWAP	0x40
+#define S3C_ATA_CFG_IORDYEN	0x02
+
+#endif /* __ASM_PLAT_REGS_ATA_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-fb-v4.h b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
index 0f43599248ad..4c3647f80057 100644
--- a/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
@@ -40,16 +40,10 @@
 
 /* OSD1 and OSD4 do not have register D */
 
-#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
-#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
-#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
-#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
-
+#define VIDOSD_BASE				(0x40)
 
 #define VIDINTCON0				(0x130)
 
-#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
-
 /* WINCONx */
 
 #define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
@@ -143,76 +137,6 @@
 #define WPALCON_W2PAL_16BPP_A555		(1 << 6)
 
 
-/* system specific implementation code for palette sizes, and other
- * information that changes depending on which architecture is being
- * compiled.
-*/
-
-/* return true if window _win has OSD register D */
-#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
-
-static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
-{
-	if (win < 2)
-		return 256;
-	if (win < 4)
-		return 16;
-	if (win == 4)
-		return 4;
-
-	BUG();	/* shouldn't get here */
-}
-
-static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
-{
-	/* all windows can do 1/2 bpp */
-
-	if ((bpp == 25 || bpp == 19) && win == 0)
-		return 0;	/* win 0 does not have 19 or 25bpp modes */
-
-	if (bpp == 4 && win == 4)
-		return 0;
-
-	if (bpp == 8 && (win >= 3))
-		return 0;	/* win 3/4 cannot do 8bpp in any mode */
-
-	return 1;
-}
-
-static inline int s3c_fb_pal_is16(unsigned int window)
-{
-	return window > 1;
-}
-
-struct s3c_fb_palette {
-	struct fb_bitfield	r;
-	struct fb_bitfield	g;
-	struct fb_bitfield	b;
-	struct fb_bitfield	a;
-};
-
-static inline void s3c_fb_init_palette(unsigned int window,
-				       struct s3c_fb_palette *palette)
-{
-	if (window < 2) {
-		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
-		palette->r.offset = 16;
-		palette->r.length = 8;
-		palette->g.offset = 8;
-		palette->g.length = 8;
-		palette->b.offset = 0;
-		palette->b.length = 8;
-	} else {
-		/* currently we assume RGB 5/6/5 */
-		palette->r.offset = 11;
-		palette->r.length = 5;
-		palette->g.offset = 5;
-		palette->g.length = 6;
-		palette->b.offset = 0;
-		palette->b.length = 5;
-	}
-}
-
 /* Notes on per-window bpp settings
  *
  * Value	Win0	 Win1	  Win2	   Win3	    Win 4
diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
index 0ef806e50344..8f39aa5b26ea 100644
--- a/arch/arm/plat-samsung/include/plat/regs-fb.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
@@ -112,6 +112,13 @@
 #define VIDCON2_ORGYCbCr			(1 << 8)
 #define VIDCON2_YUVORDCrCb			(1 << 7)
 
+/* PRTCON (S3C6410, S5PC100)
+ * Might not be present in the S3C6410 documentation,
+ * but tests prove it's there almost for sure; shouldn't hurt in any case.
+ */
+#define PRTCON					(0x0c)
+#define PRTCON_PROTECT				(1 << 11)
+
 /* VIDTCON0 */
 
 #define VIDTCON0_VBPDE_MASK			(0xff << 24)
@@ -173,6 +180,7 @@
 #define WINCONx_BITSWP				(1 << 18)
 #define WINCONx_BYTSWP				(1 << 17)
 #define WINCONx_HAWSWP				(1 << 16)
+#define WINCONx_WSWP				(1 << 15)
 #define WINCONx_BURSTLEN_MASK			(0x3 << 9)
 #define WINCONx_BURSTLEN_SHIFT			(9)
 #define WINCONx_BURSTLEN_16WORD			(0x0 << 9)
@@ -212,6 +220,13 @@
 #define WINCON1_BPPMODE_25BPP_A1888		(0xd << 2)
 #define WINCON1_BPPMODE_28BPP_A4888		(0xd << 2)
 
+/* S5PV210 */
+#define SHADOWCON				(0x34)
+#define SHADOWCON_WINx_PROTECT(_win)		(1 << (10 + (_win)))
+/* DMA channels (all windows) */
+#define SHADOWCON_CHx_ENABLE(_win)		(1 << (_win))
+/* Local input channels (windows 0-2) */
+#define SHADOWCON_CHx_LOCAL_ENABLE(_win)	(1 << (5 + (_win)))
 
 #define VIDOSDxA_TOPLEFT_X_MASK			(0x7ff << 11)
 #define VIDOSDxA_TOPLEFT_X_SHIFT		(11)
@@ -291,11 +306,12 @@
 #define VIDINTCON0_FRAMESEL0_ACTIVE		(0x2 << 15)
 #define VIDINTCON0_FRAMESEL0_FRONTPORCH		(0x3 << 15)
 
-#define VIDINTCON0_FRAMESEL1			(1 << 14)
-#define VIDINTCON0_FRAMESEL1_NONE		(0x0 << 14)
-#define VIDINTCON0_FRAMESEL1_BACKPORCH		(0x1 << 14)
-#define VIDINTCON0_FRAMESEL1_VSYNC		(0x2 << 14)
-#define VIDINTCON0_FRAMESEL1_FRONTPORCH		(0x3 << 14)
+#define VIDINTCON0_FRAMESEL1			(1 << 13)
+#define VIDINTCON0_FRAMESEL1_MASK		(0x3 << 13)
+#define VIDINTCON0_FRAMESEL1_NONE		(0x0 << 13)
+#define VIDINTCON0_FRAMESEL1_BACKPORCH		(0x1 << 13)
+#define VIDINTCON0_FRAMESEL1_VSYNC		(0x2 << 13)
+#define VIDINTCON0_FRAMESEL1_FRONTPORCH		(0x3 << 13)
 
 #define VIDINTCON0_INT_FRAME			(1 << 12)
 #define VIDINTCON0_FIFIOSEL_MASK		(0x7f << 5)
@@ -321,6 +337,10 @@
 #define VIDINTCON1_INT_FIFO			(1 << 0)
 
 /* Window colour-key control registers */
+#define WKEYCON					(0x140)	/* 6410,V210 */
+
+#define WKEYCON0				(0x00)
+#define WKEYCON1				(0x04)
 
 #define WxKEYCON0_KEYBL_EN			(1 << 26)
 #define WxKEYCON0_KEYEN_F			(1 << 25)
diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h
index 65c190d142dd..30b7cc14cef5 100644
--- a/arch/arm/plat-samsung/include/plat/regs-rtc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-rtc.h
@@ -14,6 +14,9 @@
 #define __ASM_ARCH_REGS_RTC_H __FILE__
 
 #define S3C2410_RTCREG(x) (x)
+#define S3C2410_INTP		S3C2410_RTCREG(0x30)
+#define S3C2410_INTP_ALM	(1 << 1)
+#define S3C2410_INTP_TIC	(1 << 0)
 
 #define S3C2410_RTCCON	      S3C2410_RTCREG(0x40)
 #define S3C2410_RTCCON_RTCEN  (1<<0)
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index a6eba8496b24..788837e99cb3 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -259,6 +259,8 @@ struct s3c2410_uartcfg {
 	unsigned short	   flags;
 	upf_t		   uart_flags;	 /* default uart flags */
 
+	unsigned int	   has_fracval;
+
 	unsigned long	   ucon;	 /* value of ucon for port */
 	unsigned long	   ulcon;	 /* value of ulcon for port */
 	unsigned long	   ufcon;	 /* value of ufcon for port */
diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
index 8d18d9d4d148..dc90f5ede88f 100644
--- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
+++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg.h
@@ -226,6 +226,7 @@
 
 #define S3C_DIEPMSK				S3C_HSOTG_REG(0x810)
 
+#define S3C_DIEPMSK_TxFIFOEmpty			(1 << 7)
 #define S3C_DIEPMSK_INEPNakEffMsk		(1 << 6)
 #define S3C_DIEPMSK_INTknEPMisMsk		(1 << 5)
 #define S3C_DIEPMSK_INTknTXFEmpMsk		(1 << 4)
@@ -371,6 +372,7 @@
 
 #define S3C_DIEPDMA(_a)				S3C_HSOTG_REG(0x914 + ((_a) * 0x20))
 #define S3C_DOEPDMA(_a)				S3C_HSOTG_REG(0xB14 + ((_a) * 0x20))
+#define S3C_DTXFSTS(_a)				S3C_HSOTG_REG(0x918 + ((_a) * 0x20))
 
 #define S3C_EPFIFO(_a)				S3C_HSOTG_REG(0x1000 + ((_a) * 0x1000))
 
diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
index 5fe6721b57f7..810744213120 100644
--- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
@@ -32,6 +32,12 @@ enum dma_ch {
 	DMACH_UART2_TX,
 	DMACH_UART3_RX,
 	DMACH_UART3_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_UART5_RX,
+	DMACH_UART5_TX,
+	DMACH_USI_RX,
+	DMACH_USI_TX,
 	DMACH_IRDA,
 	DMACH_I2S0_RX,
 	DMACH_I2S0_TX,
@@ -64,6 +70,20 @@ enum dma_ch {
 	DMACH_MSM_REQ2,
 	DMACH_MSM_REQ1,
 	DMACH_MSM_REQ0,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS0AUX_RX,
+	DMACH_SLIMBUS0AUX_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
 	/* END Marker, also used to denote a reserved channel */
 	DMACH_MAX,
 };
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index e5aba8f95b79..ff1a561b326e 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -32,6 +32,8 @@ struct s3c64xx_spi_csinfo {
  * struct s3c64xx_spi_info - SPI Controller defining structure
  * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
  * @src_clk_name: Platform name of the corresponding clock.
+ * @clk_from_cmu: If the SPI clock/prescalar control block is present
+ *     by the platform's clock-management-unit and not in SPI controller.
  * @num_cs: Number of CS this controller emulates.
  * @cfg_gpio: Configure pins for this SPI controller.
  * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
@@ -41,6 +43,7 @@ struct s3c64xx_spi_csinfo {
 struct s3c64xx_spi_info {
 	int src_clk_nr;
 	char *src_clk_name;
+	bool clk_from_cmu;
 
 	int num_cs;
 
@@ -65,7 +68,7 @@ struct s3c64xx_spi_info {
 extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 
 #endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 016674fa20dd..85853f8c4c5d 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -20,10 +20,37 @@ struct mmc_host;
 struct mmc_card;
 struct mmc_ios;
 
+enum cd_types {
+	S3C_SDHCI_CD_INTERNAL,	/* use mmc internal CD line */
+	S3C_SDHCI_CD_EXTERNAL,	/* use external callback */
+	S3C_SDHCI_CD_GPIO,	/* use external gpio pin for CD line */
+	S3C_SDHCI_CD_NONE,	/* no CD line, use polling to detect card */
+	S3C_SDHCI_CD_PERMANENT,	/* no CD line, card permanently wired to host */
+};
+
+enum clk_types {
+	S3C_SDHCI_CLK_DIV_INTERNAL,	/* use mmc internal clock divider */
+	S3C_SDHCI_CLK_DIV_EXTERNAL,	/* use external clock divider */
+};
+
 /**
  * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
  * @max_width: The maximum number of data bits supported.
  * @host_caps: Standard MMC host capabilities bit field.
+ * @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @clk_type: Type of clock divider method (see clk_types enum above)
+ * @ext_cd_init: Initialize external card detect subsystem. Called on
+ *		 sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ *		 notify_func argument is a callback to the sdhci-s3c driver
+ *		 that triggers the card detection event. Callback arguments:
+ *		 dev is pointer to platform device of the host controller,
+ *		 state is new state of the card (0 - removed, 1 - inserted).
+ * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on
+ *		 sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL.
+ *		 notify_func argument is the same callback as for ext_cd_init.
+ * @ext_cd_gpio: gpio pin used for external CD line, valid only if
+ *		 cd_type == S3C_SDHCI_CD_GPIO
+ * @ext_cd_gpio_invert: invert values for external CD gpio line
  * @cfg_gpio: Configure the GPIO for a specific card bit-width
  * @cfg_card: Configure the interface for a specific card and speed. This
  *            is necessary the controllers and/or GPIO blocks require the
@@ -37,9 +64,18 @@ struct mmc_ios;
 struct s3c_sdhci_platdata {
 	unsigned int	max_width;
 	unsigned int	host_caps;
+	enum cd_types	cd_type;
+	enum clk_types	clk_type;
 
 	char		**clocks;	/* set of clock sources */
 
+	int		ext_cd_gpio;
+	bool		ext_cd_gpio_invert;
+	int	(*ext_cd_init)(void (*notify_func)(struct platform_device *,
+						   int state));
+	int	(*ext_cd_cleanup)(void (*notify_func)(struct platform_device *,
+						      int state));
+
 	void	(*cfg_gpio)(struct platform_device *dev, int width);
 	void	(*cfg_card)(struct platform_device *dev,
 			    void __iomem *regbase,
@@ -58,6 +94,7 @@ struct s3c_sdhci_platdata {
 extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
 extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
 extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd);
 
 /* Default platform data, exported so that per-cpu initialisation can
  * set the correct one when there are more than one cpu type selected.
@@ -66,6 +103,7 @@ extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
 extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
 
 /* Helper function availablity */
 
@@ -78,13 +116,17 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 
-/* S3C6400 SDHCI setup */
+/* S3C64XX SDHCI setup */
 
 #ifdef CONFIG_S3C64XX_SETUP_SDHCI
 extern char *s3c64xx_hsmmc_clksrcs[4];
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
 					 void __iomem *r,
 					 struct mmc_ios *ios,
@@ -92,76 +134,62 @@ extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
 
 static inline void s3c6400_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
 }
 
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-#endif  /* CONFIG_S3C_DEV_HSMMC */
-
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s3c6400_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s3c6400_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
 	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6400_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
-
-/* S3C6410 SDHCI setup */
 
 extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
 					 void __iomem *r,
 					 struct mmc_ios *ios,
 					 struct mmc_card *card);
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 static inline void s3c6410_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6410_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
 
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s3c6410_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s3c6410_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
 	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s3c6410_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
 
 #else
 static inline void s3c6410_default_sdhci0(void) { }
@@ -183,48 +211,42 @@ extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
 					   struct mmc_ios *ios,
 					   struct mmc_card *card);
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 static inline void s5pc100_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
 }
-#else
-static inline void s5pc100_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
 
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s5pc100_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
 }
-#else
-static inline void s5pc100_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s5pc100_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
 	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+#endif
 }
-#else
-static inline void s5pc100_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-
 
 #else
 static inline void s5pc100_default_sdhci0(void) { }
 static inline void s5pc100_default_sdhci1(void) { }
 static inline void s5pc100_default_sdhci2(void) { }
+
 #endif /* CONFIG_S5PC100_SETUP_SDHCI */
 
+/* S5PV210 SDHCI setup */
 
-/* S5PC110 SDHCI setup */
 #ifdef CONFIG_S5PV210_SETUP_SDHCI
 extern char *s5pv210_hsmmc_clksrcs[4];
 
@@ -233,46 +255,101 @@ extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
 					   struct mmc_ios *ios,
 					   struct mmc_card *card);
 
-#ifdef CONFIG_S3C_DEV_HSMMC
 static inline void s5pv210_default_sdhci0(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC
 	s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
 	s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s5pv210_default_sdhci0(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC */
 
-#ifdef CONFIG_S3C_DEV_HSMMC1
 static inline void s5pv210_default_sdhci1(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC1
 	s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
 	s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s5pv210_default_sdhci1(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
 
-#ifdef CONFIG_S3C_DEV_HSMMC2
 static inline void s5pv210_default_sdhci2(void)
 {
+#ifdef CONFIG_S3C_DEV_HSMMC2
 	s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
 	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
 	s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv210_default_sdhci3(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
+	s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+#endif
 }
-#else
-static inline void s5pv210_default_sdhci2(void) { }
-#endif /* CONFIG_S3C_DEV_HSMMC2 */
 
 #else
 static inline void s5pv210_default_sdhci0(void) { }
 static inline void s5pv210_default_sdhci1(void) { }
 static inline void s5pv210_default_sdhci2(void) { }
-#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+static inline void s5pv210_default_sdhci3(void) { }
+
+#endif /* CONFIG_S5PV210_SETUP_SDHCI */
 
+/* S5PV310 SDHCI setup */
+#ifdef CONFIG_S5PV310_SETUP_SDHCI
+extern char *s5pv310_hsmmc_clksrcs[4];
 
+extern void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+static inline void s5pv310_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv310_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv310_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	s3c_hsmmc2_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv310_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci3(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	s3c_hsmmc3_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv310_setup_sdhci3_cfg_gpio;
+	s3c_hsmmc3_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+#else
+static inline void s5pv310_default_sdhci0(void) { }
+static inline void s5pv310_default_sdhci1(void) { }
+static inline void s5pv310_default_sdhci2(void) { }
+static inline void s5pv310_default_sdhci3(void) { }
 
+#endif /* CONFIG_S5PV310_SETUP_SDHCI */
 
 #endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
new file mode 100644
index 000000000000..7cf2e1e3b20f
--- /dev/null
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -0,0 +1,37 @@
+/* linux/arch/arm/plat-samsung/platformdata.c
+ *
+ * Copyright 2010 Ben Dooks <ben-linux <at> fluff.org>
+ *
+ * Helper for platform data setting
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+
+void __init *s3c_set_platdata(void *pd, size_t pdsize,
+			      struct platform_device *pdev)
+{
+	void *npd;
+
+	if (!pd) {
+		/* too early to use dev_name(), may not be registered */
+		printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
+		return NULL;
+	}
+
+	npd = kmemdup(pd, pdsize, GFP_KERNEL);
+	if (!npd) {
+		printk(KERN_ERR "%s: cannot clone platform data\n", pdev->name);
+		return NULL;
+	}
+
+	pdev->dev.platform_data = npd;
+	return npd;
+}
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index 7df03f87fbfa..96528200eb79 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -192,7 +192,7 @@ struct s3c_gpio_pm s3c_gpio_pm_2bit = {
 	.resume = s3c_gpio_pm_2bit_resume,
 };
 
-#ifdef CONFIG_ARCH_S3C64XX
+#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
 static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
 {
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
@@ -302,7 +302,7 @@ struct s3c_gpio_pm s3c_gpio_pm_4bit = {
 	.save	= s3c_gpio_pm_4bit_save,
 	.resume = s3c_gpio_pm_4bit_resume,
 };
-#endif /* CONFIG_ARCH_S3C64XX */
+#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
 
 /**
  * s3c_pm_save_gpio() - save gpio chip data for suspend
diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c
index a91305a60aed..b4ff8d74ac40 100644
--- a/arch/arm/plat-samsung/s3c-pl330.c
+++ b/arch/arm/plat-samsung/s3c-pl330.c
@@ -15,6 +15,8 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 
 #include <asm/hardware/pl330.h>
 
@@ -27,6 +29,7 @@
  * @node: To attach to the global list of DMACs.
  * @pi: PL330 configuration info for the DMAC.
  * @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
+ * @clk: Pointer of DMAC operation clock.
  */
 struct s3c_pl330_dmac {
 	unsigned		busy_chan;
@@ -34,6 +37,7 @@ struct s3c_pl330_dmac {
 	struct list_head	node;
 	struct pl330_info	*pi;
 	struct kmem_cache	*kmcache;
+	struct clk		*clk;
 };
 
 /**
@@ -1072,16 +1076,25 @@ static int pl330_probe(struct platform_device *pdev)
 	if (ret)
 		goto probe_err4;
 
-	ret = pl330_add(pl330_info);
-	if (ret)
-		goto probe_err5;
-
 	/* Allocate a new DMAC */
 	s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL);
 	if (!s3c_pl330_dmac) {
 		ret = -ENOMEM;
+		goto probe_err5;
+	}
+
+	/* Get operation clock and enable it */
+	s3c_pl330_dmac->clk = clk_get(&pdev->dev, "pdma");
+	if (IS_ERR(s3c_pl330_dmac->clk)) {
+		dev_err(&pdev->dev, "Cannot get operation clock.\n");
+		ret = -EINVAL;
 		goto probe_err6;
 	}
+	clk_enable(s3c_pl330_dmac->clk);
+
+	ret = pl330_add(pl330_info);
+	if (ret)
+		goto probe_err7;
 
 	/* Hook the info */
 	s3c_pl330_dmac->pi = pl330_info;
@@ -1094,7 +1107,7 @@ static int pl330_probe(struct platform_device *pdev)
 
 	if (!s3c_pl330_dmac->kmcache) {
 		ret = -ENOMEM;
-		goto probe_err7;
+		goto probe_err8;
 	}
 
 	/* Get the list of peripherals */
@@ -1120,10 +1133,13 @@ static int pl330_probe(struct platform_device *pdev)
 
 	return 0;
 
+probe_err8:
+	pl330_del(pl330_info);
 probe_err7:
-	kfree(s3c_pl330_dmac);
+	clk_disable(s3c_pl330_dmac->clk);
+	clk_put(s3c_pl330_dmac->clk);
 probe_err6:
-	pl330_del(pl330_info);
+	kfree(s3c_pl330_dmac);
 probe_err5:
 	free_irq(irq, pl330_info);
 probe_err4:
@@ -1188,6 +1204,10 @@ static int pl330_remove(struct platform_device *pdev)
 		}
 	}
 
+	/* Disable operation clock */
+	clk_disable(dmac->clk);
+	clk_put(dmac->clk);
+
 	/* Remove the DMAC */
 	list_del(&dmac->node);
 	kfree(dmac);
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 37fa593884ee..e91270e4f640 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -14,11 +14,9 @@
 #include <linux/amba/serial.h>
 #include <mach/spear.h>
 
-		.macro	addruart, rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1					@ MMU enabled?
-		moveq	\rx, #SPEAR_DBG_UART_BASE		@ Physical base
-		movne	\rx, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
+		.macro	addruart, rp, rv
+		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base
+		mov	\rv, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
 		.endm
 
 		.macro	senduart, rd, rx
diff --git a/arch/arm/plat-spear/padmux.c b/arch/arm/plat-spear/padmux.c
index d2aab3adcdeb..555eec6dc1cb 100644
--- a/arch/arm/plat-spear/padmux.c
+++ b/arch/arm/plat-spear/padmux.c
@@ -66,7 +66,7 @@ static int pmx_mode_set(struct pmx_mode *mode)
  * If peripheral is not supported by current mode then request is rejected.
  * Conflicts between peripherals are not handled and peripherals will be
  * enabled in the order they are present in pmx_dev array.
- * In case of conflicts last peripheral enalbed will be present.
+ * In case of conflicts last peripheral enabled will be present.
  * Returns -ve on Err otherwise 0
  */
 static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index a1025d38f383..ab211652e4ca 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -58,6 +58,11 @@
 
 #define INT_STATUS		0x1
 
+/*
+ * Minimum clocksource/clockevent timer range in seconds
+ */
+#define SPEAR_MIN_RANGE 4
+
 static __iomem void *gpt_base;
 static struct clk *gpt_clk;
 
@@ -66,44 +71,6 @@ static void clockevent_set_mode(enum clock_event_mode mode,
 static int clockevent_next_event(unsigned long evt,
 				 struct clock_event_device *clk_event_dev);
 
-/*
- * Following clocksource_set_clock and clockevent_set_clock picked
- * from arch/mips/kernel/time.c
- */
-
-void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find a shift value */
-	for (shift = 32; shift > 0; shift--) {
-		temp = (u64) NSEC_PER_SEC << shift;
-		do_div(temp, clock);
-		if ((temp >> 32) == 0)
-			break;
-	}
-	cs->shift = shift;
-	cs->mult = (u32) temp;
-}
-
-void __init clockevent_set_clock(struct clock_event_device *cd,
-	unsigned int clock)
-{
-	u64 temp;
-	u32 shift;
-
-	/* Find a shift value */
-	for (shift = 32; shift > 0; shift--) {
-		temp = (u64) clock << shift;
-		do_div(temp, NSEC_PER_SEC);
-		if ((temp >> 32) == 0)
-			break;
-	}
-	cd->shift = shift;
-	cd->mult = (u32) temp;
-}
-
 static cycle_t clocksource_read_cycles(struct clocksource *cs)
 {
 	return (cycle_t) readw(gpt_base + COUNT(CLKSRC));
@@ -138,7 +105,7 @@ static void spear_clocksource_init(void)
 	val |= CTRL_ENABLE ;
 	writew(val, gpt_base + CR(CLKSRC));
 
-	clocksource_set_clock(&clksrc, tick_rate);
+	clocksource_calc_mult_shift(&clksrc, tick_rate, SPEAR_MIN_RANGE);
 
 	/* register the clocksource */
 	clocksource_register(&clksrc);
@@ -233,7 +200,7 @@ static void __init spear_clockevent_init(void)
 	tick_rate = clk_get_rate(gpt_clk);
 	tick_rate >>= CTRL_PRESCALER16;
 
-	clockevent_set_clock(&clkevt, tick_rate);
+	clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE);
 
 	clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
 			&clkevt);
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
index 1b9348bf0e49..d3a0985c9681 100644
--- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -16,13 +16,10 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-		.macro	addruart, rx, tmp
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000	@ physical base address
-		addeq	\rx, \rx, #0x00070000
-		movne	\rx, #0xf0000000	@ virtual base
-		addne	\rx, \rx, #0x00070000
+		.macro	addruart, rp, rv
+		mov	\rp,      #0x00070000
+		add	\rv, \rp, #0xf0000000	@ virtual base
+		add	\rp, \rp, #0x80000000	@ physical base
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig
new file mode 100644
index 000000000000..1bf499570f42
--- /dev/null
+++ b/arch/arm/plat-tcc/Kconfig
@@ -0,0 +1,20 @@
+if ARCH_TCC_926
+
+menu "Telechips ARM926-based CPUs"
+
+choice
+	prompt "Telechips CPU type:"
+	default ARCH_TCC8K
+
+config ARCH_TCC8K
+	bool TCC8000
+	select USB_ARCH_HAS_OHCI
+	help
+	  Support for Telechips TCC8000 systems
+
+endchoice
+
+source "arch/arm/mach-tcc8k/Kconfig"
+
+endmenu
+endif
diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile
new file mode 100644
index 000000000000..eceabc869b8f
--- /dev/null
+++ b/arch/arm/plat-tcc/Makefile
@@ -0,0 +1,3 @@
+# "Telechips Platform Common Modules"
+
+obj-y := clock.o system.o
diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c
new file mode 100644
index 000000000000..f3ced10d5271
--- /dev/null
+++ b/arch/arm/plat-tcc/clock.c
@@ -0,0 +1,179 @@
+/*
+ * Clock framework for Telechips SoCs
+ * Based on arch/arm/plat-mxc/clock.c
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2010 Hans J. Koch, hjk@linutronix.de
+ *
+ * Licensed under the terms of the GPL v2.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+
+static DEFINE_MUTEX(clocks_mutex);
+
+/*-------------------------------------------------------------------------
+ * Standard clock functions defined in include/linux/clk.h
+ *-------------------------------------------------------------------------*/
+
+static void __clk_disable(struct clk *clk)
+{
+	BUG_ON(clk->refcount == 0);
+
+	if (!(--clk->refcount) && clk->disable) {
+		/* Unconditionally disable the clock in hardware */
+		clk->disable(clk);
+		/* recursively disable parents */
+		if (clk->parent)
+			__clk_disable(clk->parent);
+	}
+}
+
+static int __clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	if (clk->refcount++ == 0 && clk->enable) {
+		if (clk->parent)
+			ret = __clk_enable(clk->parent);
+		if (ret)
+			return ret;
+		else
+			return clk->enable(clk);
+	}
+
+	return 0;
+}
+
+/* This function increments the reference count on the clock and enables the
+ * clock if not already enabled. The parent clock tree is recursively enabled
+ */
+int clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	if (!clk)
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+	ret = __clk_enable(clk);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_enable);
+
+/* This function decrements the reference count on the clock and disables
+ * the clock when reference count is 0. The parent clock tree is
+ * recursively disabled
+ */
+void clk_disable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	mutex_lock(&clocks_mutex);
+	__clk_disable(clk);
+	mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL_GPL(clk_disable);
+
+/* Retrieve the *current* clock rate. If the clock itself
+ * does not provide a special calculation routine, ask
+ * its parent and so on, until one is able to return
+ * a valid clock rate
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (!clk)
+		return 0UL;
+
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
+	return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL_GPL(clk_get_rate);
+
+/* Round the requested clock rate to the nearest supported
+ * rate that is less than or equal to the requested rate.
+ * This is dependent on the clock's current parent.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (!clk)
+		return 0;
+	if (!clk->round_rate)
+		return 0;
+
+	return clk->round_rate(clk, rate);
+}
+EXPORT_SYMBOL_GPL(clk_round_rate);
+
+/* Set the clock to the requested clock rate. The rate must
+ * match a supported rate exactly based on what clk_round_rate returns
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	if (!clk)
+		return ret;
+	if (!clk->set_rate || !rate)
+		return ret;
+
+	mutex_lock(&clocks_mutex);
+	ret = clk->set_rate(clk, rate);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+/* Set the clock's parent to another clock source */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	struct clk *old;
+	int ret = -EINVAL;
+
+	if (!clk)
+		return ret;
+	if (!clk->set_parent || !parent)
+		return ret;
+
+	mutex_lock(&clocks_mutex);
+	old = clk->parent;
+	if (clk->refcount)
+		__clk_enable(parent);
+	ret = clk->set_parent(clk, parent);
+	if (ret)
+		old = parent;
+	if (clk->refcount)
+		__clk_disable(old);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_parent);
+
+/* Retrieve the clock's parent clock source */
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (!clk)
+		return NULL;
+
+	return clk->parent;
+}
+EXPORT_SYMBOL_GPL(clk_get_parent);
diff --git a/arch/arm/plat-tcc/include/mach/clkdev.h b/arch/arm/plat-tcc/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h
new file mode 100644
index 000000000000..a12f58ad71a8
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/clock.h
@@ -0,0 +1,48 @@
+/*
+ * Low level clock header file for Telechips TCC architecture
+ * (C) 2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the GPL v2.
+ */
+
+#ifndef __ASM_ARCH_TCC_CLOCK_H__
+#define __ASM_ARCH_TCC_CLOCK_H__
+
+#ifndef __ASSEMBLY__
+
+struct clk {
+	struct clk *parent;
+	/* id number of a root clock, 0 for normal clocks */
+	int root_id;
+	/* Reference count of clock enable/disable */
+	int refcount;
+	/* Address of associated BCLKCTRx register. Must be set. */
+	void __iomem *bclkctr;
+	/* Bit position for BCLKCTRx. Must be set. */
+	int bclk_shift;
+	/* Address of ACLKxxx register, if any. */
+	void __iomem *aclkreg;
+	/* get the current clock rate (always a fresh value) */
+	unsigned long (*get_rate) (struct clk *);
+	/* Function ptr to set the clock to a new rate. The rate must match a
+	   supported rate returned from round_rate. Leave blank if clock is not
+	   programmable */
+	int (*set_rate) (struct clk *, unsigned long);
+	/* Function ptr to round the requested clock rate to the nearest
+	   supported rate that is less than or equal to the requested rate. */
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	/* Function ptr to enable the clock. Leave blank if clock can not
+	   be gated. */
+	int (*enable) (struct clk *);
+	/* Function ptr to disable the clock. Leave blank if clock can not
+	   be gated. */
+	void (*disable) (struct clk *);
+	/* Function ptr to set the parent clock of the clock. */
+	int (*set_parent) (struct clk *, struct clk *);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
new file mode 100644
index 000000000000..7662f736e42b
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/debug-macro.S
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 1994-1999 Russell King
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+		.macro	addruart, rp, rv
+		moveq	\rp, #0x90000000	@ physical base address
+		movne	\rv, #0xF1000000	@ virtual base
+		orr	\rp, \rp, #0x00007000	@ UART0
+		orr	\rv, \rv, #0x00007000	@ UART0
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #0x44]
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:
+		ldr \rd, [\rx, #0x14]
+		tst \rd, #0x20
+
+		beq 1001b
+		.endm
diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S
new file mode 100644
index 000000000000..748f401e4b6d
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/entry-macro.S
@@ -0,0 +1,68 @@
+/*
+ * include/asm-arm/arch-tcc83x/entry-macro.S
+ *
+ * Author : <linux@telechips.com>
+ * Created: June 10, 2008
+ * Description: Low-level IRQ helper macros for Telechips-based platforms
+ *
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr	\base, =0xF2003000 @ base address of PIC registers
+
+		@@ read MREQ register of PIC0
+
+		mov	\irqnr, #0
+		ldr	\irqstat, [\base, #0x00000014 ]	@ lower 32 interrupts
+		cmp	\irqstat, #0
+		bne	1001f
+
+		@@ read MREQ register of PIC1
+
+		ldr	\irqstat, [\base, #0x00000094]	@ upper 32 interrupts
+		cmp	\irqstat, #0
+		beq	1002f
+		mov	\irqnr, #0x20
+
+1001:
+		movs	\tmp, \irqstat, lsl #16
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #16
+
+		movs	\tmp, \irqstat, lsl #8
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #8
+
+		movs	\tmp, \irqstat, lsl #4
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #4
+
+		movs	\tmp, \irqstat, lsl #2
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #2
+
+		movs	\tmp, \irqstat, lsl #1
+		addeq	\irqnr, \irqnr, #1
+		orrs	\base, \base, #1
+1002:
+		@@ exit here, Z flag unset if IRQ
+
+	.endm
diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h
new file mode 100644
index 000000000000..e70d126ccaf3
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/hardware.h
@@ -0,0 +1,43 @@
+/*
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ * Rewritten by:    <linux@telechips.com>
+ * Description: Hardware definitions for TCC8300 processors and boards
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GNU Pulic License version 2.
+ */
+
+#ifndef __ASM_ARCH_TCC_HARDWARE_H
+#define __ASM_ARCH_TCC_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#endif
+#include <mach/io.h>
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		0xfffece00
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+/* DPLL control registers */
+#define DPLL_CTL		0xfffecf00
+
+#endif	/* __ASM_ARCH_TCC_HARDWARE_H */
diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h
new file mode 100644
index 000000000000..3e911d3ea0f1
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/io.h
@@ -0,0 +1,23 @@
+/*
+ * IO definitions for TCC8000 processors and boards
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GNU Public License version 2.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			__typesafe_io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h
new file mode 100644
index 000000000000..da863894d498
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/irqs.h
@@ -0,0 +1,83 @@
+/*
+ * IRQ definitions for TCC8xxx
+ *
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2.
+ *
+ */
+
+#ifndef __ASM_ARCH_TCC_IRQS_H
+#define __ASM_ARCH_TCC_IRQS_H
+
+#define NR_IRQS 64
+
+/* PIC0 interrupts */
+#define INT_ADMA1	0
+#define INT_BDMA	1
+#define INT_ADMA0	2
+#define INT_GDMA1	3
+#define INT_I2S0RX	4
+#define INT_I2S0TX	5
+#define INT_TC		6
+#define INT_UART0	7
+#define INT_USBD	8
+#define INT_SPI0TX	9
+#define INT_UDMA	10
+#define INT_LIRQ	11
+#define INT_GDMA2	12
+#define INT_GDMA0	13
+#define INT_TC32	14
+#define INT_LCD		15
+#define INT_ADC		16
+#define INT_I2C		17
+#define INT_RTCP	18
+#define INT_RTCA	19
+#define INT_NFC		20
+#define INT_SD0		21
+#define INT_GSB0	22
+#define INT_PK		23
+#define INT_USBH0	24
+#define INT_USBH1	25
+#define INT_G2D		26
+#define INT_ECC		27
+#define INT_SPI0RX	28
+#define INT_UART1	29
+#define INT_MSCL	30
+#define INT_GSB1	31
+/* PIC1 interrupts */
+#define INT_E0		32
+#define INT_E1		33
+#define INT_E2		34
+#define INT_E3		35
+#define INT_E4		36
+#define INT_E5		37
+#define INT_E6		38
+#define INT_E7		39
+#define INT_UART2	40
+#define INT_UART3	41
+#define INT_SPI1TX	42
+#define INT_SPI1RX	43
+#define INT_GSB2	44
+#define INT_SPDIF	45
+#define INT_CDIF	46
+#define INT_VBON	47
+#define INT_VBOFF	48
+#define INT_SD1		49
+#define INT_UART4	50
+#define INT_GDMA3	51
+#define INT_I2S1RX	52
+#define INT_I2S1TX	53
+#define INT_CAN0	54
+#define INT_CAN1	55
+#define INT_GSB3	56
+#define INT_KRST	57
+#define INT_UNUSED	58
+#define INT_SD0D3	59
+#define INT_SD1D3	60
+#define INT_GPS0	61
+#define INT_GPS1	62
+#define INT_GPS2	63
+
+#endif  /* ASM_ARCH_TCC_IRQS_H */
diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h
new file mode 100644
index 000000000000..cd91ba8a670b
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/memory.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Copyright (C) 2008-2009 Telechips
+ * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x20000000)
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h
new file mode 100644
index 000000000000..909e6035d843
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/system.h
@@ -0,0 +1,31 @@
+/*
+ * Author: <linux@telechips.com>
+ * Created: June 10, 2008
+ * Description: LINUX SYSTEM FUNCTIONS for TCC83x
+ *
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * Licensed under the terms of the GPL v2.
+ *
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+extern void plat_tcc_reboot(void);
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	plat_tcc_reboot();
+}
+
+#endif
diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
new file mode 100644
index 000000000000..1d9428295332
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
@@ -0,0 +1,807 @@
+/*
+ * Telechips TCC8000 register definitions
+ *
+ * (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPLv2.
+ */
+
+#ifndef TCC8K_REGS_H
+#define TCC8K_REGS_H
+
+#include <linux/types.h>
+
+#define EXT_SDRAM_BASE		0x20000000
+#define INT_SRAM_BASE		0x30000000
+#define INT_SRAM_SIZE		SZ_32K
+#define CS0_BASE		0x40000000
+#define CS1_BASE		0x50000000
+#define CS1_SIZE		SZ_64K
+#define CS2_BASE		0x60000000
+#define CS3_BASE		0x70000000
+#define AHB_PERI_BASE		0x80000000
+#define AHB_PERI_SIZE		SZ_64K
+#define APB0_PERI_BASE		0x90000000
+#define APB0_PERI_SIZE		SZ_128K
+#define APB1_PERI_BASE		0x98000000
+#define APB1_PERI_SIZE		SZ_128K
+#define DATA_TCM_BASE		0xa0000000
+#define DATA_TCM_SIZE		SZ_8K
+#define EXT_MEM_CTRL_BASE	0xf0000000
+#define EXT_MEM_CTRL_SIZE	SZ_4K
+
+#define CS1_BASE_VIRT		(void __iomem *)0xf7000000
+#define AHB_PERI_BASE_VIRT	(void __iomem *)0xf4000000
+#define APB0_PERI_BASE_VIRT	(void __iomem *)0xf1000000
+#define APB1_PERI_BASE_VIRT	(void __iomem *)0xf2000000
+#define EXT_MEM_CTRL_BASE_VIRT	(void __iomem *)0xf3000000
+#define INT_SRAM_BASE_VIRT	(void __iomem *)0xf5000000
+#define DATA_TCM_BASE_VIRT	(void __iomem *)0xf6000000
+
+#define __REG(x)     (*((volatile u32 *)(x)))
+
+/* USB Device Controller Registers */
+#define UDC_BASE	(AHB_PERI_BASE_VIRT + 0x8000)
+#define UDC_BASE_PHYS	(AHB_PERI_BASE + 0x8000)
+
+#define UDC_IR_OFFS		0x00
+#define UDC_EIR_OFFS		0x04
+#define UDC_EIER_OFFS		0x08
+#define UDC_FAR_OFFS		0x0c
+#define UDC_FNR_OFFS		0x10
+#define UDC_EDR_OFFS		0x14
+#define UDC_RT_OFFS		0x18
+#define UDC_SSR_OFFS		0x1c
+#define UDC_SCR_OFFS		0x20
+#define UDC_EP0SR_OFFS		0x24
+#define UDC_EP0CR_OFFS		0x28
+
+#define UDC_ESR_OFFS		0x2c
+#define UDC_ECR_OFFS		0x30
+#define UDC_BRCR_OFFS		0x34
+#define UDC_BWCR_OFFS		0x38
+#define UDC_MPR_OFFS		0x3c
+#define UDC_DCR_OFFS		0x40
+#define UDC_DTCR_OFFS		0x44
+#define UDC_DFCR_OFFS		0x48
+#define UDC_DTTCR1_OFFS		0x4c
+#define UDC_DTTCR2_OFFS		0x50
+#define UDC_ESR2_OFFS		0x54
+
+#define UDC_SCR2_OFFS		0x58
+#define UDC_EP0BUF_OFFS		0x60
+#define UDC_EP1BUF_OFFS		0x64
+#define UDC_EP2BUF_OFFS		0x68
+#define UDC_EP3BUF_OFFS		0x6c
+#define UDC_PLICR_OFFS		0xa0
+#define UDC_PCR_OFFS		0xa4
+
+#define UDC_UPCR0_OFFS		0xc8
+#define UDC_UPCR1_OFFS		0xcc
+#define UDC_UPCR2_OFFS		0xd0
+#define UDC_UPCR3_OFFS		0xd4
+
+/* Bits in UDC_EIR */
+#define UDC_EIR_EP0I		(1 << 0)
+#define UDC_EIR_EP1I		(1 << 1)
+#define UDC_EIR_EP2I		(1 << 2)
+#define UDC_EIR_EP3I		(1 << 3)
+#define UDC_EIR_EPI_MASK	0x0f
+
+/* Bits in UDC_EIER */
+#define UDC_EIER_EP0IE		(1 << 0)
+#define UDC_EIER_EP1IE		(1 << 1)
+#define UDC_EIER_EP2IE		(1 << 2)
+#define UDC_EIER_EP3IE		(1 << 3)
+
+/* Bits in UDC_FNR */
+#define UDC_FNR_FN_MASK		0x7ff
+#define UDC_FNR_SM		(1 << 13)
+#define UDC_FNR_FTL		(1 << 14)
+
+/* Bits in UDC_SSR */
+#define UDC_SSR_HFRES		(1 << 0)
+#define UDC_SSR_HFSUSP		(1 << 1)
+#define UDC_SSR_HFRM		(1 << 2)
+#define UDC_SSR_SDE		(1 << 3)
+#define UDC_SSR_HSP		(1 << 4)
+#define UDC_SSR_DM		(1 << 5)
+#define UDC_SSR_DP		(1 << 6)
+#define UDC_SSR_TBM		(1 << 7)
+#define UDC_SSR_VBON		(1 << 8)
+#define UDC_SSR_VBOFF		(1 << 9)
+#define UDC_SSR_EOERR		(1 << 10)
+#define UDC_SSR_DCERR		(1 << 11)
+#define UDC_SSR_TCERR		(1 << 12)
+#define UDC_SSR_BSERR		(1 << 13)
+#define UDC_SSR_TMERR		(1 << 14)
+#define UDC_SSR_BAERR		(1 << 15)
+
+/* Bits in UDC_SCR */
+#define UDC_SCR_HRESE		(1 << 0)
+#define UDC_SCR_HSSPE		(1 << 1)
+#define UDC_SCR_RRDE		(1 << 5)
+#define UDC_SCR_SPDEN		(1 << 6)
+#define UDC_SCR_DIEN		(1 << 12)
+
+/* Bits in UDC_EP0SR */
+#define UDC_EP0SR_RSR		(1 << 0)
+#define UDC_EP0SR_TST		(1 << 1)
+#define UDC_EP0SR_SHT		(1 << 4)
+#define UDC_EP0SR_LWO		(1 << 6)
+
+/* Bits in UDC_EP0CR */
+#define UDC_EP0CR_ESS		(1 << 1)
+
+/* Bits in UDC_ESR */
+#define UDC_ESR_RPS		(1 << 0)
+#define UDC_ESR_TPS		(1 << 1)
+#define UDC_ESR_LWO		(1 << 4)
+#define UDC_ESR_FFS		(1 << 6)
+
+/* Bits in UDC_ECR */
+#define UDC_ECR_ESS		(1 << 1)
+#define UDC_ECR_CDP		(1 << 2)
+
+#define UDC_ECR_FLUSH		(1 << 6)
+#define UDC_ECR_DUEN		(1 << 7)
+
+/* Bits in UDC_UPCR0 */
+#define UDC_UPCR0_VBD		(1 << 1)
+#define UDC_UPCR0_VBDS		(1 << 6)
+#define UDC_UPCR0_RCD_12	(0x0 << 9)
+#define UDC_UPCR0_RCD_24	(0x1 << 9)
+#define UDC_UPCR0_RCD_48	(0x2 << 9)
+#define UDC_UPCR0_RCS_EXT	(0x1 << 11)
+#define UDC_UPCR0_RCS_XTAL	(0x0 << 11)
+
+/* Bits in UDC_UPCR1 */
+#define UDC_UPCR1_CDT(x)	((x) << 0)
+#define UDC_UPCR1_OTGT(x)	((x) << 3)
+#define UDC_UPCR1_SQRXT(x)	((x) << 8)
+#define UDC_UPCR1_TXFSLST(x)	((x) << 12)
+
+/* Bits in UDC_UPCR2 */
+#define UDC_UPCR2_TP		(1 << 0)
+#define UDC_UPCR2_TXRT(x)	((x) << 2)
+#define UDC_UPCR2_TXVRT(x)	((x) << 5)
+#define UDC_UPCR2_OPMODE(x)	((x) << 9)
+#define UDC_UPCR2_XCVRSEL(x)	((x) << 12)
+#define UDC_UPCR2_TM		(1 << 14)
+
+/* USB Host Controller registers */
+#define USBH0_BASE	(AHB_PERI_BASE_VIRT + 0xb000)
+#define USBH1_BASE	(AHB_PERI_BASE_VIRT + 0xb800)
+
+#define OHCI_INT_ENABLE_OFFS	0x10
+
+#define RH_DESCRIPTOR_A_OFFS	0x48
+#define RH_DESCRIPTOR_B_OFFS	0x4c
+
+#define USBHTCFG0_OFFS		0x100
+#define USBHHCFG0_OFFS		0x104
+#define USBHHCFG1_OFFS		0x104
+
+/* DMA controller registers */
+#define DMAC0_BASE	(AHB_PERI_BASE + 0x4000)
+#define DMAC1_BASE	(AHB_PERI_BASE + 0xa000)
+#define DMAC2_BASE	(AHB_PERI_BASE + 0x4800)
+#define DMAC3_BASE	(AHB_PERI_BASE + 0xa800)
+
+#define DMAC_CH_OFFSET(ch)	(ch * 0x30)
+
+#define ST_SADR_OFFS		0x00
+#define SPARAM_OFFS		0x04
+#define C_SADR_OFFS		0x0c
+#define ST_DADR_OFFS		0x10
+#define DPARAM_OFFS		0x14
+#define C_DADR_OFFS		0x1c
+#define HCOUNT_OFFS		0x20
+#define CHCTRL_OFFS		0x24
+#define RPTCTRL_OFFS		0x28
+#define EXTREQ_A_OFFS		0x2c
+
+/* Bits in CHCTRL register */
+#define CHCTRL_EN		(1 << 0)
+
+#define CHCTRL_IEN		(1 << 2)
+#define CHCTRL_FLAG		(1 << 3)
+#define CHCTRL_WSIZE8		(0 << 4)
+#define CHCTRL_WSIZE16		(1 << 4)
+#define CHCTRL_WSIZE32		(2 << 4)
+
+#define CHCTRL_BSIZE1		(0 << 6)
+#define CHCTRL_BSIZE2		(1 << 6)
+#define CHCTRL_BSIZE4		(2 << 6)
+#define CHCTRL_BSIZE8		(3 << 6)
+
+#define CHCTRL_TYPE_SINGLE_E	(0 << 8)
+#define CHCTRL_TYPE_HW		(1 << 8)
+#define CHCTRL_TYPE_SW		(2 << 8)
+#define CHCTRL_TYPE_SINGLE_L	(3 << 8)
+
+#define CHCTRL_BST		(1 << 10)
+
+/* Use DMA controller 0, channel 2 for USB */
+#define USB_DMA_BASE		(DMAC0_BASE + DMAC_CH_OFFSET(2))
+
+/* NAND flash controller registers */
+#define NFC_BASE	(AHB_PERI_BASE_VIRT + 0xd000)
+#define NFC_BASE_PHYS	(AHB_PERI_BASE + 0xd000)
+
+#define NFC_CMD_OFFS		0x00
+#define NFC_LADDR_OFFS		0x04
+#define NFC_BADDR_OFFS		0x08
+#define NFC_SADDR_OFFS		0x0c
+#define NFC_WDATA_OFFS		0x10
+#define NFC_LDATA_OFFS		0x20
+#define NFC_SDATA_OFFS		0x40
+#define NFC_CTRL_OFFS		0x50
+#define NFC_PSTART_OFFS		0x54
+#define NFC_RSTART_OFFS		0x58
+#define NFC_DSIZE_OFFS		0x5c
+#define NFC_IREQ_OFFS		0x60
+#define NFC_RST_OFFS		0x64
+#define NFC_CTRL1_OFFS		0x68
+#define NFC_MDATA_OFFS		0x70
+
+#define NFC_WDATA_PHYS_ADDR	(NFC_BASE_PHYS + NFC_WDATA_OFFS)
+
+/* Bits in NFC_CTRL */
+#define NFC_CTRL_BHLD_MASK	(0xf << 0)
+#define NFC_CTRL_BPW_MASK	(0xf << 4)
+#define NFC_CTRL_BSTP_MASK	(0xf << 8)
+#define NFC_CTRL_CADDR_MASK	(0x7 << 12)
+#define NFC_CTRL_CADDR_1	(0x0 << 12)
+#define NFC_CTRL_CADDR_2	(0x1 << 12)
+#define NFC_CTRL_CADDR_3	(0x2 << 12)
+#define NFC_CTRL_CADDR_4	(0x3 << 12)
+#define NFC_CTRL_CADDR_5	(0x4 << 12)
+#define NFC_CTRL_MSK		(1 << 15)
+#define NFC_CTRL_PSIZE256	(0 << 16)
+#define NFC_CTRL_PSIZE512	(1 << 16)
+#define NFC_CTRL_PSIZE1024	(2 << 16)
+#define NFC_CTRL_PSIZE2048	(3 << 16)
+#define NFC_CTRL_PSIZE4096	(4 << 16)
+#define NFC_CTRL_PSIZE_MASK	(7 << 16)
+#define NFC_CTRL_BSIZE1		(0 << 19)
+#define NFC_CTRL_BSIZE2		(1 << 19)
+#define NFC_CTRL_BSIZE4		(2 << 19)
+#define NFC_CTRL_BSIZE8		(3 << 19)
+#define NFC_CTRL_BSIZE_MASK	(3 << 19)
+#define NFC_CTRL_RDY		(1 << 21)
+#define NFC_CTRL_CS0SEL		(1 << 22)
+#define NFC_CTRL_CS1SEL		(1 << 23)
+#define NFC_CTRL_CS2SEL		(1 << 24)
+#define NFC_CTRL_CS3SEL		(1 << 25)
+#define NFC_CTRL_CSMASK		(0xf << 22)
+#define NFC_CTRL_BW		(1 << 26)
+#define NFC_CTRL_FS		(1 << 27)
+#define NFC_CTRL_DEN		(1 << 28)
+#define NFC_CTRL_READ_IEN	(1 << 29)
+#define NFC_CTRL_PROG_IEN	(1 << 30)
+#define NFC_CTRL_RDY_IEN	(1 << 31)
+
+/* Bits in NFC_IREQ */
+#define NFC_IREQ_IRQ0		(1 << 0)
+#define NFC_IREQ_IRQ1		(1 << 1)
+#define NFC_IREQ_IRQ2		(1 << 2)
+
+#define NFC_IREQ_FLAG0		(1 << 4)
+#define NFC_IREQ_FLAG1		(1 << 5)
+#define NFC_IREQ_FLAG2		(1 << 6)
+
+/* MMC controller registers */
+#define MMC0_BASE	(AHB_PERI_BASE_VIRT + 0xe000)
+#define MMC1_BASE	(AHB_PERI_BASE_VIRT + 0xe800)
+
+/* UART base addresses */
+
+#define UART0_BASE	(APB0_PERI_BASE_VIRT + 0x07000)
+#define UART0_BASE_PHYS	(APB0_PERI_BASE + 0x07000)
+#define UART1_BASE	(APB0_PERI_BASE_VIRT + 0x08000)
+#define UART1_BASE_PHYS	(APB0_PERI_BASE + 0x08000)
+#define UART2_BASE	(APB0_PERI_BASE_VIRT + 0x09000)
+#define UART2_BASE_PHYS	(APB0_PERI_BASE + 0x09000)
+#define UART3_BASE	(APB0_PERI_BASE_VIRT + 0x0a000)
+#define UART3_BASE_PHYS	(APB0_PERI_BASE + 0x0a000)
+#define UART4_BASE	(APB0_PERI_BASE_VIRT + 0x15000)
+#define UART4_BASE_PHYS	(APB0_PERI_BASE + 0x15000)
+
+#define UART_BASE	UART0_BASE
+#define UART_BASE_PHYS	UART0_BASE_PHYS
+
+/* ECC controller */
+#define ECC_CTR_BASE	(APB0_PERI_BASE_VIRT + 0xd000)
+
+#define ECC_CTRL_OFFS		0x00
+#define ECC_BASE_OFFS		0x04
+#define ECC_MASK_OFFS		0x08
+#define ECC_CLEAR_OFFS		0x0c
+#define ECC4_0_OFFS		0x10
+#define ECC4_1_OFFS		0x14
+
+#define ECC_EADDR0_OFFS		0x50
+
+#define ECC_ERRNUM_OFFS		0x90
+#define ECC_IREQ_OFFS		0x94
+
+/* Bits in ECC_CTRL */
+#define ECC_CTRL_ECC4_DIEN	(1 << 28)
+#define ECC_CTRL_ECC8_DIEN	(1 << 29)
+#define ECC_CTRL_ECC12_DIEN	(1 << 30)
+#define ECC_CTRL_ECC_DISABLE	0x0
+#define ECC_CTRL_ECC_SLC_ENC	0x8
+#define ECC_CTRL_ECC_SLC_DEC	0x9
+#define ECC_CTRL_ECC4_ENC	0xa
+#define ECC_CTRL_ECC4_DEC	0xb
+#define ECC_CTRL_ECC8_ENC	0xc
+#define ECC_CTRL_ECC8_DEC	0xd
+#define ECC_CTRL_ECC12_ENC	0xe
+#define ECC_CTRL_ECC12_DEC	0xf
+
+/* Bits in ECC_IREQ */
+#define ECC_IREQ_E4DI		(1 << 4)
+
+#define ECC_IREQ_E4DF		(1 << 20)
+#define ECC_IREQ_E4EF		(1 << 21)
+
+/* Interrupt controller */
+
+#define PIC0_BASE	(APB1_PERI_BASE_VIRT + 0x3000)
+#define PIC0_BASE_PHYS	(APB1_PERI_BASE + 0x3000)
+
+#define PIC0_IEN_OFFS		0x00
+#define PIC0_CREQ_OFFS		0x04
+#define PIC0_IREQ_OFFS		0x08
+#define PIC0_IRQSEL_OFFS	0x0c
+#define PIC0_SRC_OFFS		0x10
+#define PIC0_MREQ_OFFS		0x14
+#define PIC0_TSTREQ_OFFS	0x18
+#define PIC0_POL_OFFS		0x1c
+#define PIC0_IRQ_OFFS		0x20
+#define PIC0_FIQ_OFFS		0x24
+#define PIC0_MIRQ_OFFS		0x28
+#define PIC0_MFIQ_OFFS		0x2c
+#define PIC0_TMODE_OFFS		0x30
+#define PIC0_SYNC_OFFS		0x34
+#define PIC0_WKUP_OFFS		0x38
+#define PIC0_TMODEA_OFFS	0x3c
+#define PIC0_INTOEN_OFFS	0x40
+#define PIC0_MEN0_OFFS		0x44
+#define PIC0_MEN_OFFS		0x48
+
+#define PIC0_IEN		__REG(PIC0_BASE + PIC0_IEN_OFFS)
+#define PIC0_IEN_PHYS		__REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS)
+#define PIC0_CREQ		__REG(PIC0_BASE + PIC0_CREQ_OFFS)
+#define PIC0_CREQ_PHYS		__REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS)
+#define PIC0_IREQ		__REG(PIC0_BASE + PIC0_IREQ_OFFS)
+#define PIC0_IRQSEL		__REG(PIC0_BASE + PIC0_IRQSEL_OFFS)
+#define PIC0_IRQSEL_PHYS	__REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS)
+#define PIC0_SRC		__REG(PIC0_BASE + PIC0_SRC_OFFS)
+#define PIC0_MREQ		__REG(PIC0_BASE + PIC0_MREQ_OFFS)
+#define PIC0_TSTREQ		__REG(PIC0_BASE + PIC0_TSTREQ_OFFS)
+#define PIC0_POL		__REG(PIC0_BASE + PIC0_POL_OFFS)
+#define PIC0_IRQ		__REG(PIC0_BASE + PIC0_IRQ_OFFS)
+#define PIC0_FIQ		__REG(PIC0_BASE + PIC0_FIQ_OFFS)
+#define PIC0_MIRQ		__REG(PIC0_BASE + PIC0_MIRQ_OFFS)
+#define PIC0_MFIQ		__REG(PIC0_BASE + PIC0_MFIQ_OFFS)
+#define PIC0_TMODE		__REG(PIC0_BASE + PIC0_TMODE_OFFS)
+#define PIC0_TMODE_PHYS		__REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS)
+#define PIC0_SYNC		__REG(PIC0_BASE + PIC0_SYNC_OFFS)
+#define PIC0_WKUP		__REG(PIC0_BASE + PIC0_WKUP_OFFS)
+#define PIC0_TMODEA		__REG(PIC0_BASE + PIC0_TMODEA_OFFS)
+#define PIC0_INTOEN		__REG(PIC0_BASE + PIC0_INTOEN_OFFS)
+#define PIC0_MEN0		__REG(PIC0_BASE + PIC0_MEN0_OFFS)
+#define PIC0_MEN		__REG(PIC0_BASE + PIC0_MEN_OFFS)
+
+#define PIC1_BASE	(APB1_PERI_BASE_VIRT + 0x3080)
+
+#define PIC1_IEN_OFFS		0x00
+#define PIC1_CREQ_OFFS		0x04
+#define PIC1_IREQ_OFFS		0x08
+#define PIC1_IRQSEL_OFFS	0x0c
+#define PIC1_SRC_OFFS		0x10
+#define PIC1_MREQ_OFFS		0x14
+#define PIC1_TSTREQ_OFFS	0x18
+#define PIC1_POL_OFFS		0x1c
+#define PIC1_IRQ_OFFS		0x20
+#define PIC1_FIQ_OFFS		0x24
+#define PIC1_MIRQ_OFFS		0x28
+#define PIC1_MFIQ_OFFS		0x2c
+#define PIC1_TMODE_OFFS		0x30
+#define PIC1_SYNC_OFFS		0x34
+#define PIC1_WKUP_OFFS		0x38
+#define PIC1_TMODEA_OFFS	0x3c
+#define PIC1_INTOEN_OFFS	0x40
+#define PIC1_MEN1_OFFS		0x44
+#define PIC1_MEN_OFFS		0x48
+
+#define PIC1_IEN	__REG(PIC1_BASE + PIC1_IEN_OFFS)
+#define PIC1_CREQ	__REG(PIC1_BASE + PIC1_CREQ_OFFS)
+#define PIC1_IREQ	__REG(PIC1_BASE + PIC1_IREQ_OFFS)
+#define PIC1_IRQSEL	__REG(PIC1_BASE + PIC1_IRQSEL_OFFS)
+#define PIC1_SRC	__REG(PIC1_BASE + PIC1_SRC_OFFS)
+#define PIC1_MREQ	__REG(PIC1_BASE + PIC1_MREQ_OFFS)
+#define PIC1_TSTREQ	__REG(PIC1_BASE + PIC1_TSTREQ_OFFS)
+#define PIC1_POL	__REG(PIC1_BASE + PIC1_POL_OFFS)
+#define PIC1_IRQ	__REG(PIC1_BASE + PIC1_IRQ_OFFS)
+#define PIC1_FIQ	__REG(PIC1_BASE + PIC1_FIQ_OFFS)
+#define PIC1_MIRQ	__REG(PIC1_BASE + PIC1_MIRQ_OFFS)
+#define PIC1_MFIQ	__REG(PIC1_BASE + PIC1_MFIQ_OFFS)
+#define PIC1_TMODE	__REG(PIC1_BASE + PIC1_TMODE_OFFS)
+#define PIC1_SYNC	__REG(PIC1_BASE + PIC1_SYNC_OFFS)
+#define PIC1_WKUP	__REG(PIC1_BASE + PIC1_WKUP_OFFS)
+#define PIC1_TMODEA	__REG(PIC1_BASE + PIC1_TMODEA_OFFS)
+#define PIC1_INTOEN	__REG(PIC1_BASE + PIC1_INTOEN_OFFS)
+#define PIC1_MEN1	__REG(PIC1_BASE + PIC1_MEN1_OFFS)
+#define PIC1_MEN	__REG(PIC1_BASE + PIC1_MEN_OFFS)
+
+/* Timer registers */
+#define TIMER_BASE		(APB1_PERI_BASE_VIRT + 0x4000)
+#define TIMER_BASE_PHYS		(APB1_PERI_BASE + 0x4000)
+
+#define TWDCFG_OFFS		0x70
+
+#define TC32EN_OFFS		0x80
+#define TC32LDV_OFFS		0x84
+#define TC32CMP0_OFFS		0x88
+#define TC32CMP1_OFFS		0x8c
+#define TC32PCNT_OFFS		0x90
+#define TC32MCNT_OFFS		0x94
+#define TC32IRQ_OFFS		0x98
+
+/* Bits in TC32EN */
+#define TC32EN_PRESCALE_MASK	0x00ffffff
+#define TC32EN_ENABLE		(1 << 24)
+#define TC32EN_LOADZERO		(1 << 25)
+#define TC32EN_STOPMODE		(1 << 26)
+#define TC32EN_LDM0		(1 << 28)
+#define TC32EN_LDM1		(1 << 29)
+
+/* Bits in TC32IRQ */
+#define TC32IRQ_MSTAT_MASK	0x0000001f
+#define TC32IRQ_RSTAT_MASK	(0x1f << 8)
+#define TC32IRQ_IRQEN0		(1 << 16)
+#define TC32IRQ_IRQEN1		(1 << 17)
+#define TC32IRQ_IRQEN2		(1 << 18)
+#define TC32IRQ_IRQEN3		(1 << 19)
+#define TC32IRQ_IRQEN4		(1 << 20)
+#define TC32IRQ_RSYNC		(1 << 30)
+#define TC32IRQ_IRQCLR		(1 << 31)
+
+/* GPIO registers */
+#define GPIOPD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOPD_DAT_OFFS		0x00
+#define GPIOPD_DOE_OFFS		0x04
+#define GPIOPD_FS0_OFFS		0x08
+#define GPIOPD_FS1_OFFS		0x0c
+#define GPIOPD_FS2_OFFS		0x10
+#define GPIOPD_RPU_OFFS		0x30
+#define GPIOPD_RPD_OFFS		0x34
+#define GPIOPD_DV0_OFFS		0x38
+#define GPIOPD_DV1_OFFS		0x3c
+
+#define GPIOPS_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOPS_DAT_OFFS		0x40
+#define GPIOPS_DOE_OFFS		0x44
+#define GPIOPS_FS0_OFFS		0x48
+#define GPIOPS_FS1_OFFS		0x4c
+#define GPIOPS_FS2_OFFS		0x50
+#define GPIOPS_FS3_OFFS		0x54
+#define GPIOPS_RPU_OFFS		0x70
+#define GPIOPS_RPD_OFFS		0x74
+#define GPIOPS_DV0_OFFS		0x78
+#define GPIOPS_DV1_OFFS		0x7c
+
+#define GPIOPS_FS1_SDH0_BITS	0x000000ff
+#define GPIOPS_FS1_SDH1_BITS	0x0000ff00
+
+#define GPIOPU_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOPU_DAT_OFFS		0x80
+#define GPIOPU_DOE_OFFS		0x84
+#define GPIOPU_FS0_OFFS		0x88
+#define GPIOPU_FS1_OFFS		0x8c
+#define GPIOPU_FS2_OFFS		0x90
+#define GPIOPU_RPU_OFFS		0xb0
+#define GPIOPU_RPD_OFFS		0xb4
+#define GPIOPU_DV0_OFFS		0xb8
+#define GPIOPU_DV1_OFFS		0xbc
+
+#define GPIOPU_FS0_TXD0		(1 << 0)
+#define GPIOPU_FS0_RXD0		(1 << 1)
+#define GPIOPU_FS0_CTS0		(1 << 2)
+#define GPIOPU_FS0_RTS0		(1 << 3)
+#define GPIOPU_FS0_TXD1		(1 << 4)
+#define GPIOPU_FS0_RXD1		(1 << 5)
+#define GPIOPU_FS0_CTS1		(1 << 6)
+#define GPIOPU_FS0_RTS1		(1 << 7)
+#define GPIOPU_FS0_TXD2		(1 << 8)
+#define GPIOPU_FS0_RXD2		(1 << 9)
+#define GPIOPU_FS0_CTS2		(1 << 10)
+#define GPIOPU_FS0_RTS2		(1 << 11)
+#define GPIOPU_FS0_TXD3		(1 << 12)
+#define GPIOPU_FS0_RXD3		(1 << 13)
+#define GPIOPU_FS0_CTS3		(1 << 14)
+#define GPIOPU_FS0_RTS3		(1 << 15)
+#define GPIOPU_FS0_TXD4		(1 << 16)
+#define GPIOPU_FS0_RXD4		(1 << 17)
+#define GPIOPU_FS0_CTS4		(1 << 18)
+#define GPIOPU_FS0_RTS4		(1 << 19)
+
+#define GPIOFC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOFC_DAT_OFFS		0xc0
+#define GPIOFC_DOE_OFFS		0xc4
+#define GPIOFC_FS0_OFFS		0xc8
+#define GPIOFC_FS1_OFFS		0xcc
+#define GPIOFC_FS2_OFFS		0xd0
+#define GPIOFC_FS3_OFFS		0xd4
+#define GPIOFC_RPU_OFFS		0xf0
+#define GPIOFC_RPD_OFFS		0xf4
+#define GPIOFC_DV0_OFFS		0xf8
+#define GPIOFC_DV1_OFFS		0xfc
+
+#define GPIOFD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOFD_DAT_OFFS		0x100
+#define GPIOFD_DOE_OFFS		0x104
+#define GPIOFD_FS0_OFFS		0x108
+#define GPIOFD_FS1_OFFS		0x10c
+#define GPIOFD_FS2_OFFS		0x110
+#define GPIOFD_RPU_OFFS		0x130
+#define GPIOFD_RPD_OFFS		0x134
+#define GPIOFD_DV0_OFFS		0x138
+#define GPIOFD_DV1_OFFS		0x13c
+
+#define GPIOLC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOLC_DAT_OFFS		0x140
+#define GPIOLC_DOE_OFFS		0x144
+#define GPIOLC_FS0_OFFS		0x148
+#define GPIOLC_FS1_OFFS		0x14c
+#define GPIOLC_RPU_OFFS		0x170
+#define GPIOLC_RPD_OFFS		0x174
+#define GPIOLC_DV0_OFFS		0x178
+#define GPIOLC_DV1_OFFS		0x17c
+
+#define GPIOLD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOLD_DAT_OFFS		0x180
+#define GPIOLD_DOE_OFFS		0x184
+#define GPIOLD_FS0_OFFS		0x188
+#define GPIOLD_FS1_OFFS		0x18c
+#define GPIOLD_FS2_OFFS		0x190
+#define GPIOLD_RPU_OFFS		0x1b0
+#define GPIOLD_RPD_OFFS		0x1b4
+#define GPIOLD_DV0_OFFS		0x1b8
+#define GPIOLD_DV1_OFFS		0x1bc
+
+#define GPIOAD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOAD_DAT_OFFS		0x1c0
+#define GPIOAD_DOE_OFFS		0x1c4
+#define GPIOAD_FS0_OFFS		0x1c8
+#define GPIOAD_RPU_OFFS		0x1f0
+#define GPIOAD_RPD_OFFS		0x1f4
+#define GPIOAD_DV0_OFFS		0x1f8
+#define GPIOAD_DV1_OFFS		0x1fc
+
+#define GPIOXC_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOXC_DAT_OFFS		0x200
+#define GPIOXC_DOE_OFFS		0x204
+#define GPIOXC_FS0_OFFS		0x208
+#define GPIOXC_RPU_OFFS		0x230
+#define GPIOXC_RPD_OFFS		0x234
+#define GPIOXC_DV0_OFFS		0x238
+#define GPIOXC_DV1_OFFS		0x23c
+
+#define GPIOXC_FS0		__REG(GPIOXC_BASE + GPIOXC_FS0_OFFS)
+
+#define GPIOXC_FS0_CS0		(1 << 26)
+#define GPIOXC_FS0_CS1		(1 << 27)
+
+#define GPIOXD_BASE		(APB1_PERI_BASE_VIRT + 0x5000)
+
+#define GPIOXD_DAT_OFFS		0x240
+#define GPIOXD_FS0_OFFS		0x248
+#define GPIOXD_RPU_OFFS		0x270
+#define GPIOXD_RPD_OFFS		0x274
+#define GPIOXD_DV0_OFFS		0x278
+#define GPIOXD_DV1_OFFS		0x27c
+
+#define GPIOPK_BASE		(APB1_PERI_BASE_VIRT + 0x1c000)
+
+#define GPIOPK_RST_OFFS		0x008
+#define GPIOPK_DAT_OFFS		0x100
+#define GPIOPK_DOE_OFFS		0x104
+#define GPIOPK_FS0_OFFS		0x108
+#define GPIOPK_FS1_OFFS		0x10c
+#define GPIOPK_FS2_OFFS		0x110
+#define GPIOPK_IRQST_OFFS	0x210
+#define GPIOPK_IRQEN_OFFS	0x214
+#define GPIOPK_IRQPOL_OFFS	0x218
+#define GPIOPK_IRQTM0_OFFS	0x21c
+#define GPIOPK_IRQTM1_OFFS	0x220
+#define GPIOPK_CTL_OFFS		0x22c
+
+#define PMGPIO_BASE		(APB1_PERI_BASE_VIRT + 0x10000)
+#define BACKUP_RAM_BASE		PMGPIO_BASE
+
+#define PMGPIO_DAT_OFFS		0x800
+#define PMGPIO_DOE_OFFS		0x804
+#define PMGPIO_FS0_OFFS		0x808
+#define PMGPIO_RPU_OFFS		0x810
+#define PMGPIO_RPD_OFFS		0x814
+#define PMGPIO_DV0_OFFS		0x818
+#define PMGPIO_DV1_OFFS		0x81c
+#define PMGPIO_EE0_OFFS		0x820
+#define PMGPIO_EE1_OFFS		0x824
+#define PMGPIO_CTL_OFFS		0x828
+#define PMGPIO_DI_OFFS		0x82c
+#define PMGPIO_STR_OFFS		0x830
+#define PMGPIO_STF_OFFS		0x834
+#define PMGPIO_POL_OFFS		0x838
+#define PMGPIO_APB_OFFS		0x800
+
+/* Clock controller registers */
+#define CKC_BASE	((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000))
+
+#define CLKCTRL_OFFS		0x00
+#define PLL0CFG_OFFS		0x04
+#define PLL1CFG_OFFS		0x08
+#define CLKDIVC0_OFFS		0x0c
+
+#define BCLKCTR0_OFFS		0x14
+#define SWRESET0_OFFS		0x18
+
+#define BCLKCTR1_OFFS		0x60
+#define SWRESET1_OFFS		0x64
+#define PWDCTL_OFFS		0x68
+#define PLL2CFG_OFFS		0x6c
+#define CLKDIVC1_OFFS		0x70
+
+#define ACLKREF_OFFS		0x80
+#define ACLKI2C_OFFS		0x84
+#define ACLKSPI0_OFFS		0x88
+#define ACLKSPI1_OFFS		0x8c
+#define ACLKUART0_OFFS		0x90
+#define ACLKUART1_OFFS		0x94
+#define ACLKUART2_OFFS		0x98
+#define ACLKUART3_OFFS		0x9c
+#define ACLKUART4_OFFS		0xa0
+#define ACLKTCT_OFFS		0xa4
+#define ACLKTCX_OFFS		0xa8
+#define ACLKTCZ_OFFS		0xac
+#define ACLKADC_OFFS		0xb0
+#define ACLKDAI0_OFFS		0xb4
+#define ACLKDAI1_OFFS		0xb8
+#define ACLKLCD_OFFS		0xbc
+#define ACLKSPDIF_OFFS		0xc0
+#define ACLKUSBH_OFFS		0xc4
+#define ACLKSDH0_OFFS		0xc8
+#define ACLKSDH1_OFFS		0xcc
+#define ACLKC3DEC_OFFS		0xd0
+#define ACLKEXT_OFFS		0xd4
+#define ACLKCAN0_OFFS		0xd8
+#define ACLKCAN1_OFFS		0xdc
+#define ACLKGSB0_OFFS		0xe0
+#define ACLKGSB1_OFFS		0xe4
+#define ACLKGSB2_OFFS		0xe8
+#define ACLKGSB3_OFFS		0xec
+
+#define PLLxCFG_PD		(1 << 31)
+
+/* CLKCTRL bits */
+#define CLKCTRL_XE		(1 << 31)
+
+/* CLKDIVCx bits */
+#define CLKDIVC0_XTE		(1 << 7)
+#define CLKDIVC0_XE		(1 << 15)
+#define CLKDIVC0_P1E		(1 << 23)
+#define CLKDIVC0_P0E		(1 << 31)
+
+#define CLKDIVC1_P2E		(1 << 7)
+
+/* BCLKCTR0 clock bits */
+#define BCLKCTR0_USBD		(1 << 4)
+#define BCLKCTR0_ECC		(1 << 9)
+#define BCLKCTR0_USBH0		(1 << 11)
+#define BCLKCTR0_NFC		(1 << 16)
+
+/* BCLKCTR1 clock bits */
+#define BCLKCTR1_USBH1		(1 << 20)
+
+/* SWRESET0 bits */
+#define SWRESET0_USBD		(1 << 4)
+#define SWRESET0_USBH0		(1 << 11)
+
+/* SWRESET1 bits */
+#define SWRESET1_USBH1		(1 << 20)
+
+/* System clock sources.
+ * Note: These are the clock sources that serve as parents for
+ * all other clocks. They have no parents themselves.
+ *
+ * These values are used for struct clk->root_id. All clocks
+ * that are not system clock sources have this value set to
+ * CLK_SRC_NOROOT.
+ * The values for system clocks start with CLK_SRC_PLL0 == 0
+ * because this gives us exactly the values needed for the lower
+ * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is
+ * defined as -1 to not disturb the order.
+ */
+enum root_clks {
+	CLK_SRC_NOROOT = -1,
+	CLK_SRC_PLL0 = 0,
+	CLK_SRC_PLL1,
+	CLK_SRC_PLL0DIV,
+	CLK_SRC_PLL1DIV,
+	CLK_SRC_XI,
+	CLK_SRC_XIDIV,
+	CLK_SRC_XTI,
+	CLK_SRC_XTIDIV,
+	CLK_SRC_PLL2,
+	CLK_SRC_PLL2DIV,
+	CLK_SRC_PK0,
+	CLK_SRC_PK1,
+	CLK_SRC_PK2,
+	CLK_SRC_PK3,
+	CLK_SRC_PK4,
+	CLK_SRC_48MHZ
+};
+
+#define CLK_SRC_MASK		0xf
+
+/* Bits in ACLK* registers */
+#define ACLK_EN		(1 << 28)
+#define ACLK_SEL_SHIFT		24
+#define ACLK_SEL_MASK		0x0f000000
+#define ACLK_DIV_MASK		0x00000fff
+
+/* System configuration registers */
+
+#define SCFG_BASE		(APB1_PERI_BASE_VIRT + 0x13000)
+
+#define	BMI_OFFS		0x00
+#define AHBCON0_OFFS		0x04
+#define APBPWE_OFFS		0x08
+#define DTCMWAIT_OFFS		0x0c
+#define ECCSEL_OFFS		0x10
+#define AHBCON1_OFFS		0x14
+#define SDHCFG_OFFS		0x18
+#define REMAP_OFFS		0x20
+#define LCDSIAE_OFFS		0x24
+#define XMCCFG_OFFS		0xe0
+#define IMCCFG_OFFS		0xe4
+
+/* Values for ECCSEL */
+#define ECCSEL_EXTMEM		0x0
+#define ECCSEL_DTCM		0x1
+#define ECCSEL_INT_SRAM		0x2
+#define ECCSEL_AHB		0x3
+
+/* Bits in XMCCFG */
+#define XMCCFG_NFCE		(1 << 1)
+#define XMCCFG_FDXD		(1 << 2)
+
+/* External memory controller registers */
+
+#define EMC_BASE		EXT_MEM_CTRL_BASE
+
+#define SDCFG_OFFS		0x00
+#define SDFSM_OFFS		0x04
+#define MCFG_OFFS		0x08
+
+#define CSCFG0_OFFS		0x10
+#define CSCFG1_OFFS		0x14
+#define CSCFG2_OFFS		0x18
+#define CSCFG3_OFFS		0x1c
+
+#define MCFG_SDEN		(1 << 4)
+
+#endif /* TCC8K_REGS_H */
diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h
new file mode 100644
index 000000000000..057acbe651d9
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * A definition needed by arch core code.
+ *
+ */
+#define CLOCK_TICK_RATE		(HZ * 100000UL)
diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h
new file mode 100644
index 000000000000..7a3e33a27a30
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/uncompress.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
+ *
+ * This file is licensed under the terms of the GPL version 2.
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/types.h>
+
+#include <mach/tcc8k-regs.h>
+
+unsigned int system_rev;
+
+#define ID_MASK			0x7fff
+
+static void putc(int c)
+{
+	u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2));
+	u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2));
+
+	while (!(*uart_lsr & UART_LSR_THRE))
+		barrier();
+	*uart_tx = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h
new file mode 100644
index 000000000000..99414d9c2b94
--- /dev/null
+++ b/arch/arm/plat-tcc/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * Author: <linux@telechips.com>
+ * Created: June 10, 2008
+ *
+ * Copyright (C) 2000 Russell King.
+ * Copyright (C) 2008-2009 Telechips
+ *
+ * Licensed under the terms of the GPL v2.
+ */
+#define VMALLOC_END	0xf0000000UL
diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c
new file mode 100644
index 000000000000..cc208fae3e7a
--- /dev/null
+++ b/arch/arm/plat-tcc/system.c
@@ -0,0 +1,25 @@
+/*
+ * System functions for Telechips TCCxxxx SoCs
+ *
+ * Copyright (C) Hans J. Koch <hjk@linutronix.de>
+ *
+ * Licensed under the terms of the GPL v2.
+ *
+ */
+
+#include <linux/io.h>
+
+#include <mach/tcc8k-regs.h>
+
+/* System reboot */
+void plat_tcc_reboot(void)
+{
+	/* Make sure clocks are on */
+	__raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS);
+
+	/* Enable watchdog reset */
+	__raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS);
+	/* Wait for reset */
+	while(1)
+		;
+}
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index 9b1a66816aa6..5cf88e8427b1 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -2,3 +2,7 @@ obj-y	:= clock.o
 obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
 obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o
 obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o
+ifeq ($(CONFIG_LEDS_CLASS),y)
+obj-$(CONFIG_ARCH_REALVIEW) += leds.o
+obj-$(CONFIG_ARCH_VERSATILE) += leds.o
+endif
diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c
new file mode 100644
index 000000000000..3169fa555ea6
--- /dev/null
+++ b/arch/arm/plat-versatile/leds.c
@@ -0,0 +1,103 @@
+/*
+ * Driver for the 8 user LEDs found on the RealViews and Versatiles
+ * Based on DaVinci's DM365 board code
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Linus Walleij <triad@df.lth.se>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#ifdef VERSATILE_SYS_BASE
+#define LEDREG	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
+#endif
+
+#ifdef REALVIEW_SYS_BASE
+#define LEDREG	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
+#endif
+
+struct versatile_led {
+	struct led_classdev	cdev;
+	u8			mask;
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static const struct {
+	const char *name;
+	const char *trigger;
+} versatile_leds[] = {
+	{ "versatile:0", "heartbeat", },
+	{ "versatile:1", "mmc0", },
+	{ "versatile:2", },
+	{ "versatile:3", },
+	{ "versatile:4", },
+	{ "versatile:5", },
+	{ "versatile:6", },
+	{ "versatile:7", },
+};
+
+static void versatile_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct versatile_led *led = container_of(cdev,
+						 struct versatile_led, cdev);
+	u32 reg = readl(LEDREG);
+
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
+	writel(reg, LEDREG);
+}
+
+static enum led_brightness versatile_led_get(struct led_classdev *cdev)
+{
+	struct versatile_led *led = container_of(cdev,
+						 struct versatile_led, cdev);
+	u32 reg = readl(LEDREG);
+
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int __init versatile_leds_init(void)
+{
+	int i;
+
+	/* All ON */
+	writel(0xff, LEDREG);
+	for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) {
+		struct versatile_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = versatile_leds[i].name;
+		led->cdev.brightness_set = versatile_led_set;
+		led->cdev.brightness_get = versatile_led_get;
+		led->cdev.default_trigger = versatile_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Since we may have triggers on any subsystem, defer registration
+ * until after subsystem_init.
+ */
+fs_initcall(versatile_leds_init);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 48cbdcb6bbd4..55590a4d87c9 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Jul 12 21:10:14 2010
+# Last update: Thu Sep 9 22:43:01 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2622,7 +2622,7 @@ kraken			MACH_KRAKEN		KRAKEN			2634
 gw2388			MACH_GW2388		GW2388			2635
 jadecpu			MACH_JADECPU		JADECPU			2636
 carlisle		MACH_CARLISLE		CARLISLE		2637
-lux_sf9			MACH_LUX_SFT9		LUX_SFT9		2638
+lux_sf9			MACH_LUX_SF9		LUX_SF9			2638
 nemid_tb		MACH_NEMID_TB		NEMID_TB		2639
 terrier			MACH_TERRIER		TERRIER			2640
 turbot			MACH_TURBOT		TURBOT			2641
@@ -2950,3 +2950,97 @@ davinci_dm365_dvr	MACH_DAVINCI_DM365_DVR	DAVINCI_DM365_DVR	2963
 netviz			MACH_NETVIZ		NETVIZ			2964
 flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
 wlan_computer		MACH_WLAN_COMPUTER	WLAN_COMPUTER		2966
+lpc24xx			MACH_LPC24XX		LPC24XX			2967
+spica			MACH_SPICA		SPICA			2968
+gpsdisplay		MACH_GPSDISPLAY		GPSDISPLAY		2969
+bipnet			MACH_BIPNET		BIPNET			2970
+overo_ctu_inertial	MACH_OVERO_CTU_INERTIAL	OVERO_CTU_INERTIAL	2971
+davinci_dm355_mmm	MACH_DAVINCI_DM355_MMM	DAVINCI_DM355_MMM	2972
+pc9260_v2		MACH_PC9260_V2		PC9260_V2		2973
+ptx7545			MACH_PTX7545		PTX7545			2974
+tm_efdc			MACH_TM_EFDC		TM_EFDC			2975
+omap3_waldo1		MACH_OMAP3_WALDO1	OMAP3_WALDO1		2977
+flyer			MACH_FLYER		FLYER			2978
+tornado3240		MACH_TORNADO3240	TORNADO3240		2979
+soli_01			MACH_SOLI_01		SOLI_01			2980
+omapl138_europalc	MACH_OMAPL138_EUROPALC	OMAPL138_EUROPALC	2981
+helios_v1		MACH_HELIOS_V1		HELIOS_V1		2982
+netspace_lite_v2	MACH_NETSPACE_LITE_V2	NETSPACE_LITE_V2	2983
+ssc			MACH_SSC		SSC			2984
+premierwave_en		MACH_PREMIERWAVE_EN	PREMIERWAVE_EN		2985
+wasabi			MACH_WASABI		WASABI			2986
+vivow			MACH_VIVOW		VIVOW			2987
+mx50_rdp		MACH_MX50_RDP		MX50_RDP		2988
+universal		MACH_UNIVERSAL		UNIVERSAL		2989
+real6410		MACH_REAL6410		REAL6410		2990
+spx_sakura		MACH_SPX_SAKURA		SPX_SAKURA		2991
+ij3k_2440		MACH_IJ3K_2440		IJ3K_2440		2992
+omap3_bc10		MACH_OMAP3_BC10		OMAP3_BC10		2993
+thebe			MACH_THEBE		THEBE			2994
+rv082			MACH_RV082		RV082			2995
+armlguest		MACH_ARMLGUEST		ARMLGUEST		2996
+tjinc1000		MACH_TJINC1000		TJINC1000		2997
+dockstar		MACH_DOCKSTAR		DOCKSTAR		2998
+ax8008			MACH_AX8008		AX8008			2999
+gnet_sgce		MACH_GNET_SGCE		GNET_SGCE		3000
+pxwnas_500_1000		MACH_PXWNAS_500_1000	PXWNAS_500_1000		3001
+ea20			MACH_EA20		EA20			3002
+awm2			MACH_AWM2		AWM2			3003
+ti8148evm		MACH_TI8148EVM		TI8148EVM		3004
+tegra_seaboard		MACH_TEGRA_SEABOARD	TEGRA_SEABOARD		3005
+linkstation_chlv2	MACH_LINKSTATION_CHLV2	LINKSTATION_CHLV2	3006
+tera_pro2_rack		MACH_TERA_PRO2_RACK	TERA_PRO2_RACK		3007
+rubys			MACH_RUBYS		RUBYS			3008
+aquarius		MACH_AQUARIUS		AQUARIUS		3009
+mx53_ard		MACH_MX53_ARD		MX53_ARD		3010
+mx53_smd		MACH_MX53_SMD		MX53_SMD		3011
+lswxl			MACH_LSWXL		LSWXL			3012
+dove_avng_v3		MACH_DOVE_AVNG_V3	DOVE_AVNG_V3		3013
+sdi_ess_9263		MACH_SDI_ESS_9263	SDI_ESS_9263		3014
+jocpu550		MACH_JOCPU550		JOCPU550		3015
+msm8x60_rumi3		MACH_MSM8X60_RUMI3	MSM8X60_RUMI3		3016
+msm8x60_ffa		MACH_MSM8X60_FFA	MSM8X60_FFA		3017
+yanomami		MACH_YANOMAMI		YANOMAMI		3018
+gta04			MACH_GTA04		GTA04			3019
+cm_a510			MACH_CM_A510		CM_A510			3020
+omap3_rfs200		MACH_OMAP3_RFS200	OMAP3_RFS200		3021
+kx33xx			MACH_KX33XX		KX33XX			3022
+ptx7510			MACH_PTX7510		PTX7510			3023
+top9000			MACH_TOP9000		TOP9000			3024
+teenote			MACH_TEENOTE		TEENOTE			3025
+ts3			MACH_TS3		TS3			3026
+a0			MACH_A0			A0			3027
+fsm9xxx_surf		MACH_FSM9XXX_SURF	FSM9XXX_SURF		3028
+fsm9xxx_ffa		MACH_FSM9XXX_FFA	FSM9XXX_FFA		3029
+frrhwcdma60w		MACH_FRRHWCDMA60W	FRRHWCDMA60W		3030
+remus			MACH_REMUS		REMUS			3031
+at91cap7xdk		MACH_AT91CAP7XDK	AT91CAP7XDK		3032
+at91cap7stk		MACH_AT91CAP7STK	AT91CAP7STK		3033
+kt_sbc_sam9_1		MACH_KT_SBC_SAM9_1	KT_SBC_SAM9_1		3034
+oratisrouter		MACH_ORATISROUTER	ORATISROUTER		3035
+armada_xp_db		MACH_ARMADA_XP_DB	ARMADA_XP_DB		3036
+spdm			MACH_SPDM		SPDM			3037
+gtib			MACH_GTIB		GTIB			3038
+dgm3240			MACH_DGM3240		DGM3240			3039
+atlas_i_lpe		MACH_ATLAS_I_LPE	ATLAS_I_LPE		3040
+htcmega			MACH_HTCMEGA		HTCMEGA			3041
+tricorder		MACH_TRICORDER		TRICORDER		3042
+tx28			MACH_TX28		TX28			3043
+bstbrd			MACH_BSTBRD		BSTBRD			3044
+pwb3090			MACH_PWB3090		PWB3090			3045
+idea6410		MACH_IDEA6410		IDEA6410		3046
+qbc9263			MACH_QBC9263		QBC9263			3047
+borabora		MACH_BORABORA		BORABORA		3048
+valdez			MACH_VALDEZ		VALDEZ			3049
+ls9g20			MACH_LS9G20		LS9G20			3050
+mios_v1			MACH_MIOS_V1		MIOS_V1			3051
+s5pc110_crespo		MACH_S5PC110_CRESPO	S5PC110_CRESPO		3052
+controltek9g20		MACH_CONTROLTEK9G20	CONTROLTEK9G20		3053
+tin307			MACH_TIN307		TIN307			3054
+tin510			MACH_TIN510		TIN510			3055
+bluecheese		MACH_BLUECHEESE		BLUECHEESE		3057
+tem3x30			MACH_TEM3X30		TEM3X30			3058
+harvest_desoto		MACH_HARVEST_DESOTO	HARVEST_DESOTO		3059
+msm8x60_qrdc		MACH_MSM8X60_QRDC	MSM8X60_QRDC		3060
+spear900		MACH_SPEAR900		SPEAR900		3061
+pcontrol_g20		MACH_PCONTROL_G20	PCONTROL_G20		3062
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 315a540c7ce5..8063a322c790 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -15,6 +15,7 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 
+#include <asm/cputype.h>
 #include <asm/thread_notify.h>
 #include <asm/vfp.h>
 
@@ -549,10 +550,13 @@ static int __init vfp_init(void)
 		/*
 		 * Check for the presence of the Advanced SIMD
 		 * load/store instructions, integer and single
-		 * precision floating point operations.
+		 * precision floating point operations. Only check
+		 * for NEON if the hardware has the MVFR registers.
 		 */
-		if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
-			elf_hwcap |= HWCAP_NEON;
+		if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) {
+			if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
+				elf_hwcap |= HWCAP_NEON;
+		}
 #endif
 	}
 	return 0;
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index f2b319333184..313b13073c54 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -1,10 +1,3 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Linux Kernel Configuration"
-
 config AVR32
 	def_bool y
 	# With EMBEDDED=n, we get lots of stuff automatically selected
@@ -45,9 +38,6 @@ config GENERIC_IRQ_PROBE
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_CLOCKEVENTS
 	def_bool y
 
@@ -93,6 +83,7 @@ config PLATFORM_AT32AP
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_ALLOCATOR
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
 
 #
 # CPU types
@@ -148,7 +139,7 @@ config BOARD_HAMMERHEAD
 	  will cover even the most exceptional need of memory bandwidth. Together with the onboard
 	  video decoder the board is ready for video processing.
 
-	  For more information see: http://www.miromico.com/hammerhead
+	  For more information see: http://www.miromico.ch/index.php/hammerhead.html 
 
 config BOARD_FAVR_32
 	bool "Favr-32 LCD-board"
diff --git a/arch/avr32/boards/mimc200/fram.c b/arch/avr32/boards/mimc200/fram.c
index 54fbd95cee9b..9764a1a1073e 100644
--- a/arch/avr32/boards/mimc200/fram.c
+++ b/arch/avr32/boards/mimc200/fram.c
@@ -41,6 +41,7 @@ static int fram_mmap(struct file *filp, struct vm_area_struct *vma)
 static const struct file_operations fram_fops = {
 	.owner			= THIS_MODULE,
 	.mmap			= fram_mmap,
+	.llseek			= noop_llseek,
 };
 
 #define FRAM_MINOR	0
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 32205c9d37d4..9854013d2728 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -1,1408 +1,159 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 29 09:39:22 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
 CONFIG_BOARD_ATNGW100_MKI=y
-# CONFIG_BOARD_ATNGW100_MKII is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
-# CONFIG_BOARD_ATSTK1003 is not set
-# CONFIG_BOARD_ATSTK1004 is not set
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-CONFIG_BOARD_ATNGW100_ADDON_NONE=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
-# CONFIG_BOARD_ATNGW100_MRMT is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
 # CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 # CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
 CONFIG_MMC_TEST=m
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=y
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
index c732cc397ad0..7ceda354597b 100644
--- a/arch/avr32/configs/atngw100_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
@@ -1,1543 +1,169 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 29 09:36:39 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
 CONFIG_BOARD_ATNGW100_MKI=y
-# CONFIG_BOARD_ATNGW100_MKII is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
-# CONFIG_BOARD_ATSTK1003 is not set
-# CONFIG_BOARD_ATSTK1004 is not set
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
 CONFIG_BOARD_ATNGW100_EVKLCD10X=y
-# CONFIG_BOARD_ATNGW100_MRMT is not set
 CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA is not set
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
 # CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 # CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_ATMEL is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_HRTIMER=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
 CONFIG_SND_ATMEL_AC97C=m
 # CONFIG_SND_SPI is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
 CONFIG_USB_GADGET_VBUS_DRAW=350
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
index 5ef67da343bc..7bc5b2ce68d5 100644
--- a/arch/avr32/configs/atngw100_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
@@ -1,1537 +1,168 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 29 09:37:19 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
 CONFIG_BOARD_ATNGW100_MKI=y
-# CONFIG_BOARD_ATNGW100_MKII is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
 CONFIG_BOARD_ATNGW100_EVKLCD10X=y
-# CONFIG_BOARD_ATNGW100_MRMT is not set
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA is not set
-CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
 # CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 # CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_ATMEL is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_HRTIMER=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
 CONFIG_SND_ATMEL_AC97C=m
 # CONFIG_SND_SPI is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
 CONFIG_USB_GADGET_VBUS_DRAW=350
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig
index 17b030777d36..19f6ceeeff7b 100644
--- a/arch/avr32/configs/atngw100_mrmt_defconfig
+++ b/arch/avr32/configs/atngw100_mrmt_defconfig
@@ -1,1363 +1,150 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Jun  3 00:24:53 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type and features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-# CONFIG_BOARD_ATSTK1000 is not set
-CONFIG_BOARD_ATNGW100=y
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
-# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
-CONFIG_BOARD_ATNGW100_MRMT=y
-CONFIG_BOARD_MRMT_REV1=y
-# CONFIG_BOARD_MRMT_REV2 is not set
-CONFIG_BOARD_MRMT_AC97=y
-# CONFIG_BOARD_MRMT_UCB1400_TS is not set
-CONFIG_BOARD_MRMT_ADS7846_TS=y
-# CONFIG_BOARD_MRMT_LCD_DISABLE is not set
-CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X=y
-# CONFIG_BOARD_MRMT_LCD_KWH043GM08 is not set
-CONFIG_BOARD_MRMT_BL_PWM=y
-CONFIG_BOARD_MRMT_RTC_I2C=y
-CONFIG_BOARD_MRMT_WIRELESS_ZB=y
-# CONFIG_BOARD_MRMT_WIRELESS_BT is not set
-# CONFIG_BOARD_MRMT_WIRELESS_NONE is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_NMI_DEBUGGING is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_BNEP is not set
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_PWM=y
-# CONFIG_ATMEL_TCLIB is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
-# CONFIG_BACKLIGHT_ATMEL_PWM is not set
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
 CONFIG_SND_ATMEL_AC97C=m
 # CONFIG_SND_SPI is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_APPLE is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
 CONFIG_USB_GADGET_DEBUG_FILES=y
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=m
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_ATMEL_PWM=y
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=m
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_S35390A=m
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=m
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/avr32/configs/atngw100mkii_defconfig b/arch/avr32/configs/atngw100mkii_defconfig
index 9b8b5b3b9c71..4bd36821d4a2 100644
--- a/arch/avr32/configs/atngw100mkii_defconfig
+++ b/arch/avr32/configs/atngw100mkii_defconfig
@@ -1,1414 +1,160 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 15:32:26 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100_MKI is not set
 CONFIG_BOARD_ATNGW100_MKII=y
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATNGW100_MKII_LCD is not set
-CONFIG_BOARD_ATNGW100_ADDON_NONE=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
-# CONFIG_BOARD_ATNGW100_MRMT is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
 # CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 # CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
 CONFIG_MMC_TEST=m
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=y
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
index 01e913d66be4..f8437ef3237f 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
@@ -1,1549 +1,172 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 15:33:09 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100_MKI is not set
 CONFIG_BOARD_ATNGW100_MKII=y
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
 CONFIG_BOARD_ATNGW100_MKII_LCD=y
-# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
 CONFIG_BOARD_ATNGW100_EVKLCD10X=y
-# CONFIG_BOARD_ATNGW100_MRMT is not set
 CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA is not set
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
 # CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 # CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_ATMEL is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_HRTIMER=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
 CONFIG_SND_ATMEL_AC97C=m
 # CONFIG_SND_SPI is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
 CONFIG_USB_GADGET_VBUS_DRAW=350
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
index bbf6bc316ecf..7f58f996d945 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
@@ -1,1549 +1,171 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Nov  5 15:33:32 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATNGW100_COMMON=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100_MKI is not set
 CONFIG_BOARD_ATNGW100_MKII=y
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
 CONFIG_BOARD_ATNGW100_MKII_LCD=y
-# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
 CONFIG_BOARD_ATNGW100_EVKLCD10X=y
-# CONFIG_BOARD_ATNGW100_MRMT is not set
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA is not set
-CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA=y
-# CONFIG_BOARD_ATNGW100_EVKLCD10X_POW_QVGA is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
 # CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 # CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_ATMEL is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_HRTIMER=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
 CONFIG_SND_ATMEL_AC97C=m
 # CONFIG_SND_SPI is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
 CONFIG_USB_GADGET_VBUS_DRAW=350
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index 42dafce02389..aec4c43a75da 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -1,1494 +1,175 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 29 13:00:55 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100_MKI is not set
-# CONFIG_BOARD_ATNGW100_MKII is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-CONFIG_BOARD_ATSTK1002=y
-# CONFIG_BOARD_ATSTK1003 is not set
-# CONFIG_BOARD_ATSTK1004 is not set
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=m
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
 CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_PWM=m
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
 CONFIG_PATA_AT32=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=m
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_MOUSE_GPIO=m
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
 CONFIG_LCD_LTV350QV=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
 CONFIG_LEDS_ATMEL_PWM=m
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_WRITEBUFFER is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 101972f40f07..50ba3db682ca 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -1,1093 +1,151 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug  5 15:34:44 2008
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
-# CONFIG_TASK_XACCT is not set
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7001=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
 CONFIG_BOARD_ATSTK1003=y
-# CONFIG_BOARD_ATSTK1004 is not set
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=m
 CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_PWM=m
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
+CONFIG_EEPROM_AT24=m
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
 CONFIG_PATA_AT32=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 CONFIG_SOUND=m
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
 CONFIG_MMC_TEST=m
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_ATMEL_PWM=m
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 518f7898df75..329e10ba3b54 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -1,667 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug  5 15:38:56 2008
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
 # CONFIG_BLOCK is not set
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type and features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7002=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
-# CONFIG_BOARD_ATSTK1003 is not set
 CONFIG_BOARD_ATSTK1004=y
-# CONFIG_BOARD_ATSTK1006 is not set
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_NMI_DEBUGGING is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_MISC_DEVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 # CONFIG_SERIAL_ATMEL_PDC is not set
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=y
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
 # CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_WRITEBUFFER is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index 363e2381f32a..dbcc1b51e506 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -1,1499 +1,178 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 29 13:00:25 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-CONFIG_BOARD_ATSTK1000=y
-# CONFIG_BOARD_ATNGW100_MKI is not set
-# CONFIG_BOARD_ATNGW100_MKII is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MERISC is not set
-# CONFIG_BOARD_MIMC200 is not set
-# CONFIG_BOARD_ATSTK1002 is not set
-# CONFIG_BOARD_ATSTK1003 is not set
-# CONFIG_BOARD_ATSTK1004 is not set
 CONFIG_BOARD_ATSTK1006=y
-# CONFIG_BOARD_ATSTK100X_CUSTOM is not set
-# CONFIG_BOARD_ATSTK100X_SPI1 is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED is not set
-# CONFIG_BOARD_ATSTK1000_J2_LED8 is not set
-# CONFIG_BOARD_ATSTK1000_J2_RGB is not set
-CONFIG_BOARD_ATSTK1000_EXTDAC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=m
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
 CONFIG_MTD_DATAFLASH_OTP=y
 CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_PWM=m
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_ICS932S401 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
 CONFIG_PATA_AT32=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=m
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_MOUSE_GPIO=m
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
 CONFIG_LCD_LTV350QV=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# Atmel devices (AVR32 and AT91)
-#
-# CONFIG_SND_ATMEL_ABDAC is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-CONFIG_SND_SPI=y
 CONFIG_SND_AT73C213=m
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
 CONFIG_LEDS_ATMEL_PWM=m
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=y
 # CONFIG_EXT4_FS_XATTR is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
 CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
 # CONFIG_CRYPTO_HW is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
index 4c3ac0643e4a..0c813b661a0a 100644
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -1,1235 +1,158 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Tue Oct 14 13:20:41 2008
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100 is not set
 CONFIG_BOARD_FAVR_32=y
-# CONFIG_BOARD_MIMC200 is not set
-CONFIG_BOARD_FAVR32_ABDAC_RATE=44100
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_PWM=m
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
 CONFIG_BACKLIGHT_ATMEL_PWM=m
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=m
-# CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_ATMELMCI_DMA=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_ATMEL_PWM=m
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_WRITEBUFFER is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig
index 3970fcc4d76e..dcc01f0eb294 100644
--- a/arch/avr32/configs/hammerhead_defconfig
+++ b/arch/avr32/configs/hammerhead_defconfig
@@ -1,1467 +1,160 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Dec  9 15:37:30 2008
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100 is not set
 CONFIG_BOARD_HAMMERHEAD=y
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MIMC200 is not set
 CONFIG_BOARD_HAMMERHEAD_USB=y
 CONFIG_BOARD_HAMMERHEAD_LCD=y
 CONFIG_BOARD_HAMMERHEAD_SND=y
 # CONFIG_BOARD_HAMMERHEAD_FPGA is not set
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_NMI_DEBUGGING is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
 # CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 # CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x80000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AT32PSIF is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_ISP116X_HCD=m
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_ATMELMCI=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT32AP700X=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
 CONFIG_CRC7=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/merisc_defconfig b/arch/avr32/configs/merisc_defconfig
index 41554db4877f..8b670a6530bf 100644
--- a/arch/avr32/configs/merisc_defconfig
+++ b/arch/avr32/configs/merisc_defconfig
@@ -1,1237 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc1
-# Wed Mar 25 14:06:15 2009
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100 is not set
-# CONFIG_BOARD_HAMMERHEAD is not set
-# CONFIG_BOARD_FAVR_32 is not set
-# CONFIG_BOARD_MIMC200 is not set
 CONFIG_BOARD_MERISC=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
 CONFIG_AP700X_32_BIT_SMC=y
-# CONFIG_AP700X_16_BIT_SMC is not set
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_OWNERSHIP_TRACE is not set
-# CONFIG_NMI_DEBUGGING is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_CAN=y
 CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
-
-#
-# CAN Device Drivers
-#
-# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
 CONFIG_MTD_ABSENT=y
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_PWM=y
-# CONFIG_ATMEL_TCLIB is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ICS932S401 is not set
 CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT32AP700X_WDT is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_ATMELMCI_DMA=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_ATMEL_PWM=y
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT32AP700X is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
 CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
index 1a58ffbc752d..5a51f2e7ffb9 100644
--- a/arch/avr32/configs/mimc200_defconfig
+++ b/arch/avr32/configs/mimc200_defconfig
@@ -1,1109 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Mon Oct 13 15:46:53 2008
-#
-CONFIG_AVR32=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-# CONFIG_OPROFILE is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type and features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_SUBARCH_AVR32B=y
-CONFIG_MMU=y
-CONFIG_PERFORMANCE_COUNTERS=y
-CONFIG_PLATFORM_AT32AP=y
-CONFIG_CPU_AT32AP700X=y
-CONFIG_CPU_AT32AP7000=y
-# CONFIG_BOARD_ATSTK1000 is not set
-# CONFIG_BOARD_ATNGW100 is not set
 CONFIG_BOARD_MIMC200=y
-CONFIG_LOADER_U_BOOT=y
-
-#
-# Atmel AVR32 AP options
-#
-# CONFIG_AP700X_32_BIT_SMC is not set
-CONFIG_AP700X_16_BIT_SMC=y
-# CONFIG_AP700X_8_BIT_SMC is not set
-CONFIG_LOAD_ADDRESS=0x10000000
-CONFIG_ENTRY_ADDRESS=0x90000000
-CONFIG_PHYS_OFFSET=0x10000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_QUICKLIST=y
-# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
-# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
-# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
-CONFIG_VIRT_TO_BUS=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_CMDLINE=""
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
-
-#
-# Bus options
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=y
-CONFIG_INET6_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x80000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS28CM00 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-CONFIG_EEPROM_AT25=y
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
 CONFIG_MMC_TEST=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_ATMELMCI=y
-# CONFIG_MMC_ATMELMCI_DMA is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
 CONFIG_RTC_DRV_DS1390=y
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT32AP700X is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_DW_DMAC=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/avr32/include/asm/cache.h b/arch/avr32/include/asm/cache.h
index d3cf35ab11ab..c3a58a189a91 100644
--- a/arch/avr32/include/asm/cache.h
+++ b/arch/avr32/include/asm/cache.h
@@ -11,7 +11,7 @@
  * cache before the transfer is done, causing old data to be seen by
  * the CPU.
  */
-#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
 
 #ifndef __ASSEMBLER__
 struct cache_info {
diff --git a/arch/avr32/include/asm/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h
index 0399359ab5d8..aaf5199d8fcb 100644
--- a/arch/avr32/include/asm/dma-mapping.h
+++ b/arch/avr32/include/asm/dma-mapping.h
@@ -336,14 +336,4 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
-static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
-{
-	return 1;
-}
-
-static inline int dma_get_cache_alignment(void)
-{
-	return boot_cpu_data.dcache.linesz;
-}
-
 #endif /* __ASM_AVR32_DMA_MAPPING_H */
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h
index e6ac0b661076..909cf66feaf5 100644
--- a/arch/avr32/include/asm/ioctls.h
+++ b/arch/avr32/include/asm/ioctls.h
@@ -1,90 +1,6 @@
 #ifndef __ASM_AVR32_IOCTLS_H
 #define __ASM_AVR32_IOCTLS_H
 
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T',0x2A, struct termios2)
-#define TCSETS2		_IOW('T',0x2B, struct termios2)
-#define TCSETSW2	_IOW('T',0x2C, struct termios2)
-#define TCSETSF2	_IOW('T',0x2D, struct termios2)
-#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
-
-#define TIOCGRS485      0x542E
-#define TIOCSRS485      0x542F
-
-#define FIONCLEX	0x5450
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
-#define FIOQSIZE	0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#include <asm-generic/ioctls.h>
 
 #endif /* __ASM_AVR32_IOCTLS_H */
diff --git a/arch/avr32/include/asm/irqflags.h b/arch/avr32/include/asm/irqflags.h
index 93570daac38a..006e9487372d 100644
--- a/arch/avr32/include/asm/irqflags.h
+++ b/arch/avr32/include/asm/irqflags.h
@@ -8,16 +8,14 @@
 #ifndef __ASM_AVR32_IRQFLAGS_H
 #define __ASM_AVR32_IRQFLAGS_H
 
+#include <linux/types.h>
 #include <asm/sysreg.h>
 
-static inline unsigned long __raw_local_save_flags(void)
+static inline unsigned long arch_local_save_flags(void)
 {
 	return sysreg_read(SR);
 }
 
-#define raw_local_save_flags(x)					\
-	do { (x) = __raw_local_save_flags(); } while (0)
-
 /*
  * This will restore ALL status register flags, not only the interrupt
  * mask flag.
@@ -25,44 +23,39 @@ static inline unsigned long __raw_local_save_flags(void)
  * The empty asm statement informs the compiler of this fact while
  * also serving as a barrier.
  */
-static inline void raw_local_irq_restore(unsigned long flags)
+static inline void arch_local_irq_restore(unsigned long flags)
 {
 	sysreg_write(SR, flags);
 	asm volatile("" : : : "memory", "cc");
 }
 
-static inline void raw_local_irq_disable(void)
+static inline void arch_local_irq_disable(void)
 {
 	asm volatile("ssrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory");
 }
 
-static inline void raw_local_irq_enable(void)
+static inline void arch_local_irq_enable(void)
 {
 	asm volatile("csrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory");
 }
 
-static inline int raw_irqs_disabled_flags(unsigned long flags)
+static inline bool arch_irqs_disabled_flags(unsigned long flags)
 {
 	return (flags & SYSREG_BIT(GM)) != 0;
 }
 
-static inline int raw_irqs_disabled(void)
+static inline bool arch_irqs_disabled(void)
 {
-	unsigned long flags = __raw_local_save_flags();
-
-	return raw_irqs_disabled_flags(flags);
+	return arch_irqs_disabled_flags(arch_local_save_flags());
 }
 
-static inline unsigned long __raw_local_irq_save(void)
+static inline unsigned long arch_local_irq_save(void)
 {
-	unsigned long flags = __raw_local_save_flags();
+	unsigned long flags = arch_local_save_flags();
 
-	raw_local_irq_disable();
+	arch_local_irq_disable();
 
 	return flags;
 }
 
-#define raw_local_irq_save(flags)				\
-	do { (flags) = __raw_local_irq_save(); } while (0)
-
 #endif /* __ASM_AVR32_IRQFLAGS_H */
diff --git a/arch/avr32/include/asm/local64.h b/arch/avr32/include/asm/local64.h
new file mode 100644
index 000000000000..36c93b5cc239
--- /dev/null
+++ b/arch/avr32/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/avr32/include/asm/pgtable.h b/arch/avr32/include/asm/pgtable.h
index a9ae30c41e74..6fbfea61f7bb 100644
--- a/arch/avr32/include/asm/pgtable.h
+++ b/arch/avr32/include/asm/pgtable.h
@@ -319,9 +319,7 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 #define pte_offset_kernel(dir, address)					\
 	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
 #define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
-#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address)
 #define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
 
 struct vm_area_struct;
 extern void update_mmu_cache(struct vm_area_struct * vma,
diff --git a/arch/avr32/include/asm/scatterlist.h b/arch/avr32/include/asm/scatterlist.h
index 06394e5ead6c..a5902d9834e8 100644
--- a/arch/avr32/include/asm/scatterlist.h
+++ b/arch/avr32/include/asm/scatterlist.h
@@ -3,6 +3,4 @@
 
 #include <asm-generic/scatterlist.h>
 
-#define ISA_DMA_THRESHOLD (0xffffffff)
-
 #endif /* __ASM_AVR32_SCATTERLIST_H */
diff --git a/arch/avr32/include/asm/syscalls.h b/arch/avr32/include/asm/syscalls.h
index 66a197266637..ab608b70b24d 100644
--- a/arch/avr32/include/asm/syscalls.h
+++ b/arch/avr32/include/asm/syscalls.h
@@ -21,7 +21,7 @@ asmlinkage int sys_clone(unsigned long, unsigned long,
 			 unsigned long, unsigned long,
 			 struct pt_regs *);
 asmlinkage int sys_vfork(struct pt_regs *);
-asmlinkage int sys_execve(char __user *, char __user *__user *,
+asmlinkage int sys_execve(const char __user *, char __user *__user *,
 			  char __user *__user *, struct pt_regs *);
 
 /* kernel/signal.c */
diff --git a/arch/avr32/include/asm/termbits.h b/arch/avr32/include/asm/termbits.h
index db2daab31fdb..366adc5ebb10 100644
--- a/arch/avr32/include/asm/termbits.h
+++ b/arch/avr32/include/asm/termbits.h
@@ -175,6 +175,7 @@ struct ktermios {
 #define FLUSHO	0010000
 #define PENDIN	0040000
 #define IEXTEN	0100000
+#define EXTPROC	0200000
 
 /* tcflow() and TCXONC use these */
 #define	TCOOFF		0
diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
index 98f94d041d9c..a727f54d64d6 100644
--- a/arch/avr32/kernel/module.c
+++ b/arch/avr32/kernel/module.c
@@ -314,10 +314,9 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
 	vfree(module->arch.syminfo);
 	module->arch.syminfo = NULL;
 
-	return module_bug_finalize(hdr, sechdrs, module);
+	return 0;
 }
 
 void module_arch_cleanup(struct module *module)
 {
-	module_bug_cleanup(module);
 }
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 2d76515745a4..9c46aaad11ce 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -383,8 +383,10 @@ asmlinkage int sys_vfork(struct pt_regs *regs)
 		       0, NULL, NULL);
 }
 
-asmlinkage int sys_execve(char __user *ufilename, char __user *__user *uargv,
-			  char __user *__user *uenvp, struct pt_regs *regs)
+asmlinkage int sys_execve(const char __user *ufilename,
+			  const char __user *const __user *uargv,
+			  const char __user *const __user *uenvp,
+			  struct pt_regs *regs)
 {
 	int error;
 	char *filename;
diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c
index 5e73c25f8f85..4aedcab7cd4b 100644
--- a/arch/avr32/kernel/ptrace.c
+++ b/arch/avr32/kernel/ptrace.c
@@ -146,9 +146,11 @@ static int ptrace_setregs(struct task_struct *tsk, const void __user *uregs)
 	return ret;
 }
 
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
 {
 	int ret;
+	void __user *datap = (void __user *) data;
 
 	switch (request) {
 	/* Read the word at location addr in the child process */
@@ -158,8 +160,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 
 	case PTRACE_PEEKUSR:
-		ret = ptrace_read_user(child, addr,
-				       (unsigned long __user *)data);
+		ret = ptrace_read_user(child, addr, datap);
 		break;
 
 	/* Write the word in data at location addr */
@@ -173,11 +174,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 
 	case PTRACE_GETREGS:
-		ret = ptrace_getregs(child, (void __user *)data);
+		ret = ptrace_getregs(child, datap);
 		break;
 
 	case PTRACE_SETREGS:
-		ret = ptrace_setregs(child, (const void __user *)data);
+		ret = ptrace_setregs(child, datap);
 		break;
 
 	default:
diff --git a/arch/avr32/kernel/sys_avr32.c b/arch/avr32/kernel/sys_avr32.c
index 459349b5ed5a..62635a09ae3e 100644
--- a/arch/avr32/kernel/sys_avr32.c
+++ b/arch/avr32/kernel/sys_avr32.c
@@ -7,7 +7,9 @@
  */
 #include <linux/unistd.h>
 
-int kernel_execve(const char *file, char **argv, char **envp)
+int kernel_execve(const char *file,
+		  const char *const *argv,
+		  const char *const *envp)
 {
 	register long scno asm("r8") = __NR_execve;
 	register long sc1 asm("r12") = (long)file;
diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
index b61d86d3debf..f7040a1e399f 100644
--- a/arch/avr32/mm/fault.c
+++ b/arch/avr32/mm/fault.c
@@ -132,7 +132,6 @@ good_area:
 	 * sure we exit gracefully rather than endlessly redo the
 	 * fault.
 	 */
-survive:
 	fault = handle_mm_fault(mm, vma, address, writeaccess ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -211,15 +210,10 @@ no_context:
 	 */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: Killing process %s\n", tsk->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	pagefault_out_of_memory();
+	if (!user_mode(regs))
+		goto no_context;
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index f66294b4f9d2..0a221d48152d 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1,10 +1,3 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Blackfin Kernel Configuration"
-
 config SYMBOL_PREFIX
 	string
 	default "_"
@@ -25,6 +18,8 @@ config BLACKFIN
 	def_bool y
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
@@ -32,6 +27,7 @@ config BLACKFIN
 	select HAVE_KERNEL_GZIP if RAMKERNEL
 	select HAVE_KERNEL_BZIP2 if RAMKERNEL
 	select HAVE_KERNEL_LZMA if RAMKERNEL
+	select HAVE_KERNEL_LZO if RAMKERNEL
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
@@ -297,7 +293,7 @@ config BF_REV_0_1
 
 config BF_REV_0_2
 	bool "0.2"
-	depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
+	depends on (BF51x || BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
 
 config BF_REV_0_3
 	bool "0.3"
@@ -328,11 +324,6 @@ config BF53x
 	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
 	default y
 
-config MEM_GENERIC_BOARD
-	bool
-	depends on GENERIC_BOARD
-	default y
-
 config MEM_MT48LC64M4A2FB_7E
 	bool
 	depends on (BFIN533_STAMP)
@@ -358,7 +349,7 @@ config MEM_MT48LC8M32B2B5_7
 
 config MEM_MT48LC32M16A2TG_75
 	bool
-	depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP)
+	depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP || BFIN527_AD7160EVAL)
 	default y
 
 config MEM_MT48H32M16LFCJ_75
@@ -428,6 +419,7 @@ config CLKIN_HZ
 	default "25000000" # most people use this
 	default "27000000" if BFIN533_EZKIT
 	default "30000000" if BFIN561_EZKIT
+	default "24000000" if BFIN527_AD7160EVAL
 	help
 	  The frequency of CLKIN crystal oscillator on the board in Hz.
 	  Warning: This value should match the crystal on the board. Otherwise,
@@ -465,6 +457,7 @@ config VCO_MULT
 	default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
 	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
+	default "25" if BFIN527_AD7160EVAL
 	help
 	  This controls the frequency of the on-chip PLL. This can be between 1 and 64.
 	  PLL Frequency = (Crystal Frequency) * (this setting)
@@ -614,9 +607,6 @@ comment "Kernel Timer/Scheduler"
 
 source kernel/Kconfig.hz
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_CLOCKEVENTS
 	bool "Generic clock events"
 	default y
@@ -853,6 +843,18 @@ config CPLB_SWITCH_TAB_L1
 	  If enabled, the CPLB Switch Tables are linked
 	  into L1 data memory. (less latency)
 
+config CACHE_FLUSH_L1
+	bool "Locate cache flush funcs in L1 Inst Memory"
+	default y
+	help
+	  If enabled, the Blackfin cache flushing functions are linked
+	  into L1 instruction memory.
+
+	  Note that this might be required to address anomalies, but
+	  these functions are pretty small, so it shouldn't be too bad.
+	  If you are using a processor affected by an anomaly, the build
+	  system will double check for you and prevent it.
+
 config APP_STACK_L1
 	bool "Support locating application stack in L1 Scratch Memory"
 	default y
@@ -919,6 +921,12 @@ config ROMKERNEL
 
 endchoice
 
+# Common code uses "ROMKERNEL" or "XIP_KERNEL", so define both
+config XIP_KERNEL
+	bool
+	default y
+	depends on ROMKERNEL
+
 source "mm/Kconfig"
 
 config BFIN_GPTIMERS
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index d1825cb24768..acb83799a215 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -102,17 +102,6 @@ config DEBUG_DOUBLEFAULT_RESET
 
 endchoice
 
-config DEBUG_ICACHE_CHECK
-	bool "Check Instruction cache coherency"
-	depends on DEBUG_KERNEL
-	depends on DEBUG_HWERR
-	help
-	  Say Y here if you are getting weird unexplained errors. This will
-	  ensure that icache is what SDRAM says it should be by doing a
-	  byte wise comparison between SDRAM and instruction cache. This
-	  also relocates the irq_panic() function to L1 memory, (which is
-	  un-cached).
-
 config DEBUG_HUNT_FOR_ZERO
 	bool "Catch NULL pointer reads/writes"
 	default y
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 9d5ffaf5492a..46738d49b7c8 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -101,9 +101,8 @@ KBUILD_CFLAGS += -mcpu=$(cpu-y)-$(rev-y)
 KBUILD_AFLAGS += -mcpu=$(cpu-y)-$(rev-y)
 
 # - we utilize the silicon rev from the toolchain, so move it over to the checkflags
-# - the l1_text attribute is Blackfin specific, so fake it out as used to kill warnings
 CHECKFLAGS_SILICON = $(shell echo "" | $(CPP) $(KBUILD_CFLAGS) -dD - 2>/dev/null | awk '$$2 == "__SILICON_REVISION__" { print $$3 }')
-CHECKFLAGS += -D__SILICON_REVISION__=$(CHECKFLAGS_SILICON) -Dl1_text=__used__
+CHECKFLAGS += -D__SILICON_REVISION__=$(CHECKFLAGS_SILICON) -D__bfin__
 
 head-y   := arch/$(ARCH)/kernel/init_task.o
 
@@ -140,7 +139,7 @@ archclean:
 
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
-BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip
+BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip
 PHONY += $(BOOT_TARGETS) install
 KBUILD_IMAGE := $(boot)/vmImage
 
@@ -158,6 +157,7 @@ define archhelp
   echo  '  vmImage.bz2     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
   echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
   echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
+  echo  '  vmImage.lzo     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzo)'
   echo  '  vmImage.xip     - XIP Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.xip)'
   echo  '  install         - Install kernel using'
   echo  '                     (your) ~/bin/$(INSTALLKERNEL) or'
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index d1b3d6051fdf..13d2dbd658e3 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -8,8 +8,8 @@
 
 MKIMAGE := $(srctree)/scripts/mkuboot.sh
 
-targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip
-extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xip
+targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.xip
 
 UIMAGE_OPTS-y :=
 UIMAGE_OPTS-$(CONFIG_RAMKERNEL) += -a $(CONFIG_BOOT_LOAD)
@@ -33,6 +33,9 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
 $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,lzma)
 
+$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzo)
+
 # The mkimage tool wants 64bytes prepended to the image
 quiet_cmd_mk_bin_xip = BIN     $@
       cmd_mk_bin_xip = ( printf '%64s' | tr ' ' '\377' ; cat $< ) > $@
@@ -51,6 +54,9 @@ $(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz
 $(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma
 	$(call if_changed,uimage,lzma)
 
+$(obj)/vmImage.lzo: $(obj)/vmlinux.bin.lzo
+	$(call if_changed,uimage,lzo)
+
 $(obj)/vmImage.xip: $(obj)/vmlinux.bin.xip
 	$(call if_changed,uimage,none)
 
@@ -58,6 +64,7 @@ suffix-y                      := bin
 suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+suffix-$(CONFIG_KERNEL_LZO)   := lzo
 suffix-$(CONFIG_ROMKERNEL)    := xip
 
 $(obj)/vmImage: $(obj)/vmImage.$(suffix-y)
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index cf7c9bc94f13..c0b988ee30df 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,1384 +1,120 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
 CONFIG_BF518=y
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-CONFIG_BF_REV_0_0=y
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC32M8A2_75=y
-CONFIG_BF51x=y
-CONFIG_BFIN518F_EZBRD=y
-
-#
-# BF518 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF518_SPORT0_PORTF is not set
-CONFIG_BF518_SPORT0_PORTG=y
-CONFIG_BF518_SPORT0_TSCLK_PG10=y
-# CONFIG_BF518_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF518_UART1_PORTF=y
-# CONFIG_BF518_UART1_PORTG is not set
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_PTP_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI0=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
 CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-CONFIG_IRQ_SPI0_ERROR=7
-CONFIG_IRQ_SPI1_ERROR=7
-CONFIG_IRQ_RSI_INT0=7
-CONFIG_IRQ_RSI_INT1=7
-CONFIG_IRQ_PWM_TRIP=10
-CONFIG_IRQ_PWM_SYNC=10
-CONFIG_IRQ_PTP_STAT=10
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
 # CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
+CONFIG_PM=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
 CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_BFIN_MAC=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_BFIN_MAC_RMII is not set
-CONFIG_BFIN_MAC_USE_HWSTAMP=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
+# CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-CONFIG_SDH_BFIN=m
+CONFIG_SDH_BFIN=y
 CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
 CONFIG_NLS_CODEPAGE_936=m
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y
 CONFIG_EXACT_HWERR=y
 CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 31c2a6db6ec5..864af5b68874 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -1,1677 +1,158 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
 CONFIG_BF526=y
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-CONFIG_BF_REV_0_0=y
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48H32M16LFCJ_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
 CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-CONFIG_BF52x=y
-# CONFIG_BFIN527_EZKIT is not set
-# CONFIG_BFIN527_EZKIT_V2 is not set
-# CONFIG_BFIN527_BLUETECHNIX_CM is not set
 CONFIG_BFIN526_EZBRD=y
-
-#
-# BF527 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF527_SPORT0_PORTF is not set
-CONFIG_BF527_SPORT0_PORTG=y
-CONFIG_BF527_SPORT0_TSCLK_PG10=y
-# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF527_UART1_PORTF=y
-# CONFIG_BF527_UART1_PORTG is not set
-# CONFIG_BF527_NAND_D_PORTF is not set
-CONFIG_BF527_NAND_D_PORTH=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_SPI=10
-CONFIG_IRQ_SPI_ERROR=7
-CONFIG_IRQ_NFC_ERROR=7
-CONFIG_IRQ_HDMA_ERROR=7
-CONFIG_IRQ_HDMA=7
-CONFIG_IRQ_USB_EINT=10
 CONFIG_IRQ_USB_INT0=11
 CONFIG_IRQ_USB_INT1=11
 CONFIG_IRQ_USB_INT2=11
 CONFIG_IRQ_USB_DMA=11
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
 # CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
+CONFIG_PM=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_BFIN_MAC=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-CONFIG_BFIN_MAC_RMII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-# CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
 CONFIG_NLS_CODEPAGE_936=m
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y
 CONFIG_EXACT_HWERR=y
 CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
new file mode 100644
index 000000000000..7b6a3370dbe2
--- /dev/null
+++ b/arch/blackfin/configs/BF527-AD7160-EVAL_defconfig
@@ -0,0 +1,105 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_PREEMPT=y
+CONFIG_BF527=y
+CONFIG_BF_REV_0_2=y
+CONFIG_IRQ_TWI=7
+CONFIG_IRQ_PORTH_INTA=7
+CONFIG_IRQ_PORTH_INTB=7
+CONFIG_BFIN527_AD7160EVAL=y
+CONFIG_BF527_SPORT0_PORTF=y
+CONFIG_BF527_UART1_PORTG=y
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="bootargs=root=/dev/mtdblock0 rw clkin_hz=24000000 earlyprintk=serial,uart0,57600 console=tty0 console=ttyBF0,57600"
+CONFIG_CLKIN_HZ=24000000
+CONFIG_HZ_300=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_1=0x5554
+CONFIG_BANK_3=0xFFC0
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+# CONFIG_WIRELESS is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7160=y
+CONFIG_TOUCHSCREEN_AD7160_FW=y
+# CONFIG_SERIO is not set
+# CONFIG_BFIN_DMA_INTERFACE is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_BFIN_OTP is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=400
+CONFIG_SPI=y
+CONFIG_SPI_BFIN=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_G_SERIAL=y
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_CRC_CCITT=m
diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
index d2dfcb0e7ce4..4faa6b46a352 100644
--- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
@@ -1,1811 +1,187 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
 CONFIG_BF527=y
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
 CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC32M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
-CONFIG_IRQ_TIMER0=8
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-CONFIG_BF52x=y
-# CONFIG_BFIN527_EZKIT is not set
 CONFIG_BFIN527_EZKIT_V2=y
-# CONFIG_BFIN527_BLUETECHNIX_CM is not set
-# CONFIG_BFIN526_EZBRD is not set
-
-#
-# BF527 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF527_SPORT0_PORTF is not set
-CONFIG_BF527_SPORT0_PORTG=y
-CONFIG_BF527_SPORT0_TSCLK_PG10=y
-# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF527_UART1_PORTF=y
-# CONFIG_BF527_UART1_PORTG is not set
-# CONFIG_BF527_NAND_D_PORTF is not set
-CONFIG_BF527_NAND_D_PORTH=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_SPI=10
-CONFIG_IRQ_SPI_ERROR=7
-CONFIG_IRQ_NFC_ERROR=7
-CONFIG_IRQ_HDMA_ERROR=7
-CONFIG_IRQ_HDMA=7
-CONFIG_IRQ_USB_EINT=10
 CONFIG_IRQ_USB_INT0=11
 CONFIG_IRQ_USB_INT1=11
 CONFIG_IRQ_USB_INT2=11
 CONFIG_IRQ_USB_DMA=11
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
 # CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
+CONFIG_PM=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
 CONFIG_BFIN_SIR=m
 CONFIG_BFIN_SIR0=y
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_MCS_FIR is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
 CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-CONFIG_BFIN_MAC_RMII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ADP5520=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-CONFIG_TOUCHSCREEN_AD7879_I2C=y
 CONFIG_TOUCHSCREEN_AD7879=y
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_TOUCHSCREEN_AD7879_I2C=y
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-# CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5520 is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
 CONFIG_PMIC_ADP5520=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_LQ035Q1=y
-# CONFIG_FB_BFIN_7393 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-# CONFIG_BACKLIGHT_ADP5520 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 # CONFIG_LOGO_BLACKFIN_VGA16 is not set
-CONFIG_LOGO_BLACKFIN_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73322 is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
 CONFIG_SND_BF5XX_SOC_SSM2602=m
-# CONFIG_SND_BF5XX_SOC_AD73311 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
-# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
 CONFIG_SND_BF5XX_SOC_AD1980=m
-CONFIG_SND_BF5XX_SOC_SPORT=m
-CONFIG_SND_BF5XX_SOC_I2S=m
-CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SPORT_NUM=0
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=m
-CONFIG_SND_SOC_SSM2602=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
 CONFIG_LEDS_ADP5520=y
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
 CONFIG_NLS_CODEPAGE_936=m
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y
 CONFIG_EXACT_HWERR=y
 CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index edbb44d26bbf..9d893eb68243 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,1756 +1,179 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
 CONFIG_BF527=y
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
 CONFIG_BF_REV_0_1=y
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC32M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
-CONFIG_IRQ_TIMER0=8
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-CONFIG_BF52x=y
-CONFIG_BFIN527_EZKIT=y
-# CONFIG_BFIN527_EZKIT_V2 is not set
-# CONFIG_BFIN527_BLUETECHNIX_CM is not set
-# CONFIG_BFIN526_EZBRD is not set
-
-#
-# BF527 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF527_SPORT0_PORTF is not set
-CONFIG_BF527_SPORT0_PORTG=y
-CONFIG_BF527_SPORT0_TSCLK_PG10=y
-# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF527_UART1_PORTF=y
-# CONFIG_BF527_UART1_PORTG is not set
-# CONFIG_BF527_NAND_D_PORTF is not set
-CONFIG_BF527_NAND_D_PORTH=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_SPI=10
-CONFIG_IRQ_SPI_ERROR=7
-CONFIG_IRQ_NFC_ERROR=7
-CONFIG_IRQ_HDMA_ERROR=7
-CONFIG_IRQ_HDMA=7
-CONFIG_IRQ_USB_EINT=10
 CONFIG_IRQ_USB_INT0=11
 CONFIG_IRQ_USB_INT1=11
 CONFIG_IRQ_USB_INT2=11
 CONFIG_IRQ_USB_DMA=11
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
 # CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
+CONFIG_PM=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
 CONFIG_BFIN_SIR=m
 CONFIG_BFIN_SIR0=y
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_MCS_FIR is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
 CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-CONFIG_BFIN_MAC_RMII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-# CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_BFIN_T350MCQB=y
-# CONFIG_FB_BFIN_LQ035Q1 is not set
-# CONFIG_FB_BFIN_7393 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LMS283GF05 is not set
 CONFIG_LCD_LTV350QV=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-# CONFIG_BACKLIGHT_ADP8870 is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 # CONFIG_LOGO_BLACKFIN_VGA16 is not set
-CONFIG_LOGO_BLACKFIN_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73322 is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
 CONFIG_SND_BF5XX_SOC_SSM2602=m
-# CONFIG_SND_BF5XX_SOC_AD73311 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
-# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
 CONFIG_SND_BF5XX_SOC_AD1980=m
-CONFIG_SND_BF5XX_SOC_SPORT=m
-CONFIG_SND_BF5XX_SOC_I2S=m
-CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SPORT_NUM=0
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=m
-CONFIG_SND_SOC_SSM2602=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
 CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
 CONFIG_NLS_CODEPAGE_936=m
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y
 CONFIG_EXACT_HWERR=y
 CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF527-TLL6527M_defconfig b/arch/blackfin/configs/BF527-TLL6527M_defconfig
new file mode 100644
index 000000000000..97a2767c80f8
--- /dev/null
+++ b/arch/blackfin/configs/BF527-TLL6527M_defconfig
@@ -0,0 +1,179 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCALVERSION="DEV_0-1_pre2010"
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+CONFIG_SLAB=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_BF527=y
+CONFIG_BF_REV_0_2=y
+CONFIG_BFIN527_TLL6527M=y
+CONFIG_BF527_UART1_PORTG=y
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+CONFIG_BOOT_LOAD=0x400000
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_SCHEDULE_L1 is not set
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_DMA_UNCACHED_2M=y
+CONFIG_C_CDPRIO=y
+CONFIG_BANK_0=0xFFC2
+CONFIG_BANK_1=0xFFC2
+CONFIG_BANK_2=0xFFC2
+CONFIG_BANK_3=0xFFC2
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR0=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_GPIO_ADDR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_BFIN_MAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_AD7879=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=y
+CONFIG_INPUT_ADXL34X=y
+# CONFIG_SERIO is not set
+CONFIG_BFIN_PPI=m
+CONFIG_BFIN_SIMPLE_TIMER=m
+CONFIG_BFIN_SPORT=m
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_BFIN_JTAG_COMM=m
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_SMBUS=y
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_BLACKFIN_CAM=m
+CONFIG_OV9655=y
+CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_6x11=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_BF5XX_I2S=y
+CONFIG_SND_BF5XX_SOC_SSM2602=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_BFIN=y
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HWERR=y
+CONFIG_EXACT_HWERR=y
+CONFIG_DEBUG_DOUBLEFAULT=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC7=m
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 0b13d5836a48..f84774360c5b 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,1271 +1,112 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_FREEZER=y
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-CONFIG_BF533=y
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=6
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_BFIN533_EZKIT=y
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BLACKSTAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_BFIN532_IP0X is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
 CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
 CONFIG_CLKIN_HZ=27000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=750000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0xAAC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-
-#
-# Possible Suspend Mem / Hibernate Wake-Up Sources
-#
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-# CONFIG_BFIN_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
 CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=y
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y
 CONFIG_EXACT_HWERR=y
 CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index c3fe6e5b612f..0e7262c04cc2 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,1453 +1,126 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_FREEZER=y
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-CONFIG_BF533=y
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=6
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC64M4A2FB_7E=y
-# CONFIG_BFIN533_EZKIT is not set
-CONFIG_BFIN533_STAMP=y
-# CONFIG_BLACKSTAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_BFIN532_IP0X is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
 CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=11059200
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=750000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0xAAC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-
-#
-# Possible Suspend Mem / Hibernate Wake-Up Sources
-#
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
 CONFIG_BFIN_SIR=m
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BFIN_ASYNC=m
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_I2C_GPIO=m
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_BFIN_LQ035Q1 is not set
-CONFIG_FB_BFIN_7393=m
-CONFIG_NTSC=y
-# CONFIG_PAL is not set
-# CONFIG_NTSC_640x480 is not set
-# CONFIG_PAL_640x480 is not set
-# CONFIG_NTSC_YCBCR is not set
-# CONFIG_PAL_YCBCR is not set
-CONFIG_ADV7393_1XMEM=y
-# CONFIG_ADV7393_2XMEM is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-CONFIG_SND_BFIN_SPORT=0
-CONFIG_SND_BFIN_AD73322=m
-CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
-CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
-CONFIG_SND_BFIN_AD73322_RESET=12
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
-# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_AD73311=m
-# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
-CONFIG_SND_BFIN_AD73311_SE=4
-# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
 CONFIG_SND_BF5XX_SOC_AD1980=m
-CONFIG_SND_BF5XX_SOC_SPORT=m
-CONFIG_SND_BF5XX_SOC_I2S=m
-CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SPORT_NUM=0
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=m
-CONFIG_SND_SOC_AD73311=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y
 CONFIG_EXACT_HWERR=y
 CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 7596cf7673f1..4d14a002e7bd 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,1518 +1,137 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_FREEZER=y
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
 CONFIG_BF537=y
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=2
-CONFIG_BF_REV_MAX=3
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC32M8A2_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_TIMER0=8
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_SPI=10
-CONFIG_BFIN537_STAMP=y
-# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
-# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_CAMSIG_MINOTAUR is not set
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-
-#
-# Possible Suspend Mem / Hibernate Wake-Up Sources
-#
-# CONFIG_PM_BFIN_WAKE_PH6 is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_CAN=m
 CONFIG_CAN_RAW=m
 CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-# CONFIG_CAN_VCAN is not set
 CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
 CONFIG_CAN_BFIN=m
-# CONFIG_CAN_SJA1000 is not set
-
-#
-# CAN USB interfaces
-#
-# CONFIG_CAN_EMS_USB is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
 CONFIG_BFIN_SIR=m
 CONFIG_BFIN_SIR1=y
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_BFIN_MAC_RMII is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_BFIN_LQ035Q1 is not set
-CONFIG_FB_BF537_LQ035=m
-CONFIG_FB_BFIN_7393=m
-CONFIG_NTSC=y
-# CONFIG_PAL is not set
-# CONFIG_NTSC_640x480 is not set
-# CONFIG_PAL_640x480 is not set
-# CONFIG_NTSC_YCBCR is not set
-# CONFIG_PAL_YCBCR is not set
-CONFIG_ADV7393_1XMEM=y
-# CONFIG_ADV7393_2XMEM is not set
-# CONFIG_FB_HITACHI_TX09 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-# CONFIG_BACKLIGHT_ADP8870 is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-CONFIG_SND_BFIN_SPORT=0
-CONFIG_SND_BFIN_AD73322=m
-CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
-CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
-CONFIG_SND_BFIN_AD73322_RESET=12
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
-# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_AD73311=m
-# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
-CONFIG_SND_BFIN_AD73311_SE=4
-# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
 CONFIG_SND_BF5XX_SOC_AD1980=m
-CONFIG_SND_BF5XX_SOC_SPORT=m
-CONFIG_SND_BF5XX_SOC_I2S=m
-CONFIG_SND_BF5XX_SOC_AC97=m
-CONFIG_SND_BF5XX_SPORT_NUM=0
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=m
-CONFIG_SND_SOC_AD73311=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y
 CONFIG_EXACT_HWERR=y
 CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index bc1871d89fd5..fbee9d776f56 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -1,1442 +1,135 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
 CONFIG_BF538=y
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=4
-CONFIG_BF_REV_MAX=5
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-CONFIG_BF_REV_0_4=y
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC32M8A2_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_SPI0=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
 CONFIG_IRQ_TIMER0=12
 CONFIG_IRQ_TIMER1=12
 CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=12
-CONFIG_IRQ_PORTF_INTB=12
-CONFIG_IRQ_SPI0_ERROR=7
-CONFIG_IRQ_SPI1_ERROR=7
-CONFIG_IRQ_DMA1_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_BFIN538_EZKIT=y
-
-#
-# BF538 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_MEM0_DMA0=13
-CONFIG_IRQ_MEM0_DMA1=13
-CONFIG_IRQ_SPORT2_ERROR=7
-CONFIG_IRQ_SPORT3_ERROR=7
-CONFIG_IRQ_SPI2_ERROR=7
-CONFIG_IRQ_UART2_ERROR=7
-CONFIG_IRQ_CAN_ERROR=7
-CONFIG_IRQ_SPORT2_RX=9
-CONFIG_IRQ_SPORT2_TX=9
-CONFIG_IRQ_SPORT3_RX=9
-CONFIG_IRQ_SPORT3_TX=9
-CONFIG_IRQ_SPI1=10
-CONFIG_IRQ_SPI2=10
-CONFIG_IRQ_UART2_RX=10
-CONFIG_IRQ_UART2_TX=10
-CONFIG_IRQ_TWI0=11
-CONFIG_IRQ_TWI1=11
-CONFIG_IRQ_MEM1_DMA0=13
-CONFIG_IRQ_MEM1_DMA1=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=533333333
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
+CONFIG_PM=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_CAN=m
 CONFIG_CAN_RAW=m
 CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-# CONFIG_CAN_VCAN is not set
 CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
 CONFIG_CAN_BFIN=m
-# CONFIG_CAN_SJA1000 is not set
-
-#
-# CAN USB interfaces
-#
-# CONFIG_CAN_EMS_USB is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
 CONFIG_BFIN_SIR=m
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-CONFIG_TOUCHSCREEN_AD7879_SPI=y
 CONFIG_TOUCHSCREEN_AD7879=y
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_TOUCHSCREEN_AD7879_SPI=y
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
 CONFIG_SERIAL_BFIN_UART2=y
-# CONFIG_BFIN_UART2_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_LQ035Q1=m
-# CONFIG_FB_BFIN_7393 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y
 CONFIG_EXACT_HWERR=y
 CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index ca309cfc6ac4..05dd11db2f7d 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,1896 +1,209 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
 CONFIG_BF548_std=y
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_SPI0=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_CNT=8
 CONFIG_IRQ_TIMER0=11
-CONFIG_IRQ_TIMER1=11
-CONFIG_IRQ_TIMER2=11
-CONFIG_IRQ_TIMER3=11
-CONFIG_IRQ_TIMER4=11
-CONFIG_IRQ_TIMER5=11
-CONFIG_IRQ_TIMER6=11
-CONFIG_IRQ_TIMER7=11
-CONFIG_IRQ_USB_INT0=11
-CONFIG_IRQ_USB_INT1=11
-CONFIG_IRQ_USB_INT2=11
-CONFIG_IRQ_USB_DMA=11
-CONFIG_IRQ_TIMER8=11
-CONFIG_IRQ_TIMER9=11
-CONFIG_IRQ_TIMER10=11
-CONFIG_IRQ_SPORT2_RX=9
-CONFIG_IRQ_SPORT2_TX=9
-CONFIG_IRQ_SPORT3_RX=9
-CONFIG_IRQ_SPORT3_TX=9
-CONFIG_IRQ_SPI1=10
-CONFIG_IRQ_SPI2=10
-CONFIG_IRQ_TWI0=11
-CONFIG_IRQ_TWI1=11
-CONFIG_BF548=y
-CONFIG_BF54x=y
-CONFIG_BFIN548_EZKIT=y
-# CONFIG_BFIN548_BLUETECHNIX_CM is not set
-
-#
-# BF548 Specific Configuration
-#
-CONFIG_DEB_DMA_URGENT=y
-# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMAC0_ERR=7
-CONFIG_IRQ_EPPI0_ERR=7
-CONFIG_IRQ_SPORT0_ERR=7
-CONFIG_IRQ_SPORT1_ERR=7
-CONFIG_IRQ_SPI0_ERR=7
-CONFIG_IRQ_UART0_ERR=7
-CONFIG_IRQ_EPPI0=8
-CONFIG_IRQ_PINT0=12
-CONFIG_IRQ_PINT1=12
-CONFIG_IRQ_MDMAS0=13
-CONFIG_IRQ_MDMAS1=13
-CONFIG_IRQ_WATCHDOG=13
-CONFIG_IRQ_DMAC1_ERR=7
-CONFIG_IRQ_SPORT2_ERR=7
-CONFIG_IRQ_SPORT3_ERR=7
-CONFIG_IRQ_MXVR_DATA=7
-CONFIG_IRQ_SPI1_ERR=7
-CONFIG_IRQ_SPI2_ERR=7
-CONFIG_IRQ_UART1_ERR=7
-CONFIG_IRQ_UART2_ERR=7
-CONFIG_IRQ_CAN0_ERR=7
-CONFIG_IRQ_EPPI1=9
-CONFIG_IRQ_EPPI2=9
-CONFIG_IRQ_ATAPI_RX=10
-CONFIG_IRQ_ATAPI_TX=10
-CONFIG_IRQ_CAN0_RX=11
-CONFIG_IRQ_CAN0_TX=11
-CONFIG_IRQ_MDMAS2=13
-CONFIG_IRQ_MDMAS3=13
-CONFIG_IRQ_MXVR_ERR=11
-CONFIG_IRQ_MXVR_MSG=11
-CONFIG_IRQ_MXVR_PKT=11
-CONFIG_IRQ_EPPI1_ERR=7
-CONFIG_IRQ_EPPI2_ERR=7
-CONFIG_IRQ_UART3_ERR=7
-CONFIG_IRQ_HOST_ERR=7
-CONFIG_IRQ_PIXC_ERR=7
-CONFIG_IRQ_NFC_ERR=7
-CONFIG_IRQ_ATAPI_ERR=7
-CONFIG_IRQ_CAN1_ERR=7
-CONFIG_IRQ_HS_DMA_ERR=7
-CONFIG_IRQ_PIXC_IN0=8
-CONFIG_IRQ_PIXC_IN1=8
-CONFIG_IRQ_PIXC_OUT=8
-CONFIG_IRQ_SDH=8
-CONFIG_IRQ_KEY=8
-CONFIG_IRQ_CAN1_RX=11
-CONFIG_IRQ_CAN1_TX=11
-CONFIG_IRQ_SDH_MASK0=11
-CONFIG_IRQ_SDH_MASK1=11
-CONFIG_IRQ_OTPSEC=11
-CONFIG_IRQ_PINT2=11
-CONFIG_IRQ_PINT3=11
-
-#
-# Pin Interrupt to Port Assignment
-#
-
-#
-# Assignment
-#
-CONFIG_PINTx_REASSIGN=y
-CONFIG_PINT0_ASSIGN=0x00000101
-CONFIG_PINT1_ASSIGN=0x01010000
-CONFIG_PINT2_ASSIGN=0x07000101
-CONFIG_PINT3_ASSIGN=0x02020303
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
 # CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
 CONFIG_DMA_UNCACHED_2M=y
-# CONFIG_DMA_UNCACHED_1M is not set
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-# CONFIG_BFIN_L2_ICACHEABLE is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
 CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
-# CONFIG_BFIN_L2_DCACHEABLE is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
-# CONFIG_C_CDPRIO is not set
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
+CONFIG_PM=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_CAN=m
 CONFIG_CAN_RAW=m
 CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
-# CONFIG_CAN_VCAN is not set
 CONFIG_CAN_DEV=m
-# CONFIG_CAN_CALC_BITTIMING is not set
 CONFIG_CAN_BFIN=m
-# CONFIG_CAN_SJA1000 is not set
-
-#
-# CAN USB interfaces
-#
-# CONFIG_CAN_EMS_USB is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
 CONFIG_BFIN_SIR=m
-# CONFIG_BFIN_SIR0 is not set
-# CONFIG_BFIN_SIR2 is not set
 CONFIG_BFIN_SIR3=y
-CONFIG_SIR_BFIN_DMA=y
-# CONFIG_SIR_BFIN_PIO is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_MCS_FIR is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_LIB80211=m
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BF5XX=y
-CONFIG_MTD_NAND_BF5XX_HWECC=y
-# CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
+# CONFIG_MTD_NAND_BF5XX_HWECC is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_PLATFORM is not set
 CONFIG_PATA_BF54X=y
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_POWEROF2_BLOCKSIZE_ONLY=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
+# CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
 CONFIG_KEYBOARD_BFIN=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=m
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-# CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART2 is not set
-# CONFIG_SERIAL_BFIN_UART3 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_BF54X_LQ043=y
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_BFIN_LQ035Q1 is not set
-# CONFIG_FB_BFIN_7393 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 # CONFIG_LOGO_BLACKFIN_VGA16 is not set
-CONFIG_LOGO_BLACKFIN_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73322 is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
-# CONFIG_SND_BF5XX_I2S is not set
-# CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=y
-CONFIG_SND_BF5XX_MMAP_SUPPORT=y
-# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
-CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
 CONFIG_SND_BF5XX_SOC_AD1980=y
-CONFIG_SND_BF5XX_SOC_SPORT=y
-CONFIG_SND_BF5XX_SOC_AC97=y
-CONFIG_SND_BF5XX_SPORT_NUM=0
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AD1980=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
 CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
 CONFIG_SDH_BFIN=y
-# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
+CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
 CONFIG_CIFS=y
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
 CONFIG_NLS_CODEPAGE_936=m
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y
 CONFIG_EXACT_HWERR=y
 CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
index 6a776ce75e9c..bcb14d1c5664 100644
--- a/arch/blackfin/configs/BF561-ACVILON_defconfig
+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -1,1634 +1,153 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31.4
-# Sat Oct 24 12:15:32 2009
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
 CONFIG_BF561=y
-# CONFIG_SMP is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=5
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
 CONFIG_BF_REV_0_5=y
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
 CONFIG_IRQ_TIMER0=10
-CONFIG_IRQ_TIMER1=10
-CONFIG_IRQ_TIMER2=10
-CONFIG_IRQ_TIMER3=10
-CONFIG_IRQ_TIMER4=10
-CONFIG_IRQ_TIMER5=10
-CONFIG_IRQ_TIMER6=10
-CONFIG_IRQ_TIMER7=10
-CONFIG_IRQ_SPI_ERROR=7
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
 CONFIG_BFIN561_ACVILON=y
-
-#
-# BF561 Specific Configuration
-#
-
-#
-# Core B Support
-#
 # CONFIG_BF561_COREB is not set
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA1_ERROR=7
-CONFIG_IRQ_DMA2_ERROR=7
-CONFIG_IRQ_IMDMA_ERROR=7
-CONFIG_IRQ_PPI0_ERROR=7
-CONFIG_IRQ_PPI1_ERROR=7
-CONFIG_IRQ_UART_ERROR=7
-CONFIG_IRQ_RESERVED_ERROR=7
-CONFIG_IRQ_DMA1_0=8
-CONFIG_IRQ_DMA1_1=8
-CONFIG_IRQ_DMA1_2=8
-CONFIG_IRQ_DMA1_3=8
-CONFIG_IRQ_DMA1_4=8
-CONFIG_IRQ_DMA1_5=8
-CONFIG_IRQ_DMA1_6=8
-CONFIG_IRQ_DMA1_7=8
-CONFIG_IRQ_DMA1_8=8
-CONFIG_IRQ_DMA1_9=8
-CONFIG_IRQ_DMA1_10=8
-CONFIG_IRQ_DMA1_11=8
-CONFIG_IRQ_DMA2_0=9
-CONFIG_IRQ_DMA2_1=9
-CONFIG_IRQ_DMA2_2=9
-CONFIG_IRQ_DMA2_3=9
-CONFIG_IRQ_DMA2_4=9
-CONFIG_IRQ_DMA2_5=9
-CONFIG_IRQ_DMA2_6=9
-CONFIG_IRQ_DMA2_7=9
-CONFIG_IRQ_DMA2_8=9
-CONFIG_IRQ_DMA2_9=9
-CONFIG_IRQ_DMA2_10=9
-CONFIG_IRQ_DMA2_11=9
-CONFIG_IRQ_TIMER8=10
-CONFIG_IRQ_TIMER9=10
-CONFIG_IRQ_TIMER10=10
-CONFIG_IRQ_TIMER11=10
-CONFIG_IRQ_PROG0_INTA=11
-CONFIG_IRQ_PROG0_INTB=11
-CONFIG_IRQ_PROG1_INTA=11
-CONFIG_IRQ_PROG1_INTB=11
-CONFIG_IRQ_PROG2_INTA=11
-CONFIG_IRQ_PROG2_INTB=11
-CONFIG_IRQ_DMA1_WRRD0=8
-CONFIG_IRQ_DMA1_WRRD1=8
-CONFIG_IRQ_DMA2_WRRD0=9
-CONFIG_IRQ_DMA2_WRRD1=9
-CONFIG_IRQ_IMDMA_WRRD0=12
-CONFIG_IRQ_IMDMA_WRRD1=12
-CONFIG_IRQ_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
 CONFIG_CLKIN_HZ=12000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
 CONFIG_DMA_UNCACHED_4M=y
-# CONFIG_DMA_UNCACHED_2M is not set
-# CONFIG_DMA_UNCACHED_1M is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-# CONFIG_BFIN_L2_ICACHEABLE is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_DCACHEABLE is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-CONFIG_C_B0PEN=y
-CONFIG_C_B1PEN=y
-CONFIG_C_B2PEN=y
-# CONFIG_C_B3PEN is not set
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
 CONFIG_BANK_0=0x99b2
 CONFIG_BANK_1=0x3350
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0xAAC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_UCLINUX is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
 CONFIG_MTD_PHRAM=y
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=y
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_BFIN_DMA_INTERFACE is not set
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-CONFIG_BFIN_SIMPLE_TIMER=y
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_SERIAL_BFIN_DMA is not set
 CONFIG_SERIAL_BFIN_PIO=y
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOPCA=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
 CONFIG_I2C_PCA_PLATFORM=y
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
 CONFIG_GPIO_PCF857X=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73322 is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_BF5XX_I2S=y
-# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
-# CONFIG_SND_BF5XX_SOC_AD73311 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
-# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
-# CONFIG_SND_BF5XX_TDM is not set
-# CONFIG_SND_BF5XX_AC97 is not set
-CONFIG_SND_BF5XX_SOC_SPORT=y
 CONFIG_SND_BF5XX_SPORT_NUM=1
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=866
 CONFIG_FAT_DEFAULT_IOCHARSET="cp1251"
 CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 # CONFIG_JFFS2_ZLIB is not set
 CONFIG_JFFS2_LZO=y
 # CONFIG_JFFS2_RTIME is not set
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
 CONFIG_JFFS2_CMODE_FAVOURLZO=y
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp1251"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
 CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
 CONFIG_NLS_CODEPAGE_1251=y
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
 CONFIG_NLS_KOI8_R=y
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 792ff0938835..843aaa54a9e3 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,1255 +1,115 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
 CONFIG_BF561=y
-# CONFIG_SMP is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=5
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
 CONFIG_IRQ_TIMER0=10
-CONFIG_IRQ_TIMER1=10
-CONFIG_IRQ_TIMER2=10
-CONFIG_IRQ_TIMER3=10
-CONFIG_IRQ_TIMER4=10
-CONFIG_IRQ_TIMER5=10
-CONFIG_IRQ_TIMER6=10
-CONFIG_IRQ_TIMER7=10
-CONFIG_IRQ_SPI_ERROR=7
-CONFIG_BFIN561_EZKIT=y
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_ACVILON is not set
-
-#
-# BF561 Specific Configuration
-#
-
-#
-# Core B Support
-#
-CONFIG_BF561_COREB=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA1_ERROR=7
-CONFIG_IRQ_DMA2_ERROR=7
-CONFIG_IRQ_IMDMA_ERROR=7
-CONFIG_IRQ_PPI0_ERROR=7
-CONFIG_IRQ_PPI1_ERROR=7
-CONFIG_IRQ_UART_ERROR=7
-CONFIG_IRQ_RESERVED_ERROR=7
-CONFIG_IRQ_DMA1_0=8
-CONFIG_IRQ_DMA1_1=8
-CONFIG_IRQ_DMA1_2=8
-CONFIG_IRQ_DMA1_3=8
-CONFIG_IRQ_DMA1_4=8
-CONFIG_IRQ_DMA1_5=8
-CONFIG_IRQ_DMA1_6=8
-CONFIG_IRQ_DMA1_7=8
-CONFIG_IRQ_DMA1_8=8
-CONFIG_IRQ_DMA1_9=8
-CONFIG_IRQ_DMA1_10=8
-CONFIG_IRQ_DMA1_11=8
-CONFIG_IRQ_DMA2_0=9
-CONFIG_IRQ_DMA2_1=9
-CONFIG_IRQ_DMA2_2=9
-CONFIG_IRQ_DMA2_3=9
-CONFIG_IRQ_DMA2_4=9
-CONFIG_IRQ_DMA2_5=9
-CONFIG_IRQ_DMA2_6=9
-CONFIG_IRQ_DMA2_7=9
-CONFIG_IRQ_DMA2_8=9
-CONFIG_IRQ_DMA2_9=9
-CONFIG_IRQ_DMA2_10=9
-CONFIG_IRQ_DMA2_11=9
-CONFIG_IRQ_TIMER8=10
-CONFIG_IRQ_TIMER9=10
-CONFIG_IRQ_TIMER10=10
-CONFIG_IRQ_TIMER11=10
-CONFIG_IRQ_PROG0_INTA=11
-CONFIG_IRQ_PROG0_INTB=11
-CONFIG_IRQ_PROG1_INTA=11
-CONFIG_IRQ_PROG1_INTB=11
-CONFIG_IRQ_PROG2_INTA=11
-CONFIG_IRQ_PROG2_INTB=11
-CONFIG_IRQ_DMA1_WRRD0=8
-CONFIG_IRQ_DMA1_WRRD1=8
-CONFIG_IRQ_DMA2_WRRD0=9
-CONFIG_IRQ_DMA2_WRRD1=9
-CONFIG_IRQ_IMDMA_WRRD0=12
-CONFIG_IRQ_IMDMA_WRRD1=12
-CONFIG_IRQ_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
 CONFIG_CLKIN_HZ=30000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-CONFIG_CYCLES_CLOCKSOURCE=y
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-# CONFIG_BFIN_L2_ICACHEABLE is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
 CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
 CONFIG_BFIN_L2_DCACHEABLE=y
-# CONFIG_BFIN_L2_WRITEBACK is not set
 CONFIG_BFIN_L2_WRITETHROUGH=y
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-CONFIG_C_B0PEN=y
-CONFIG_C_B1PEN=y
-CONFIG_C_B2PEN=y
-# CONFIG_C_B3PEN is not set
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0xAAC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
+CONFIG_PM=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-# CONFIG_BFIN_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 CONFIG_INPUT=m
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=m
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y
 CONFIG_EXACT_HWERR=y
 CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 9e65d885ec0b..dae7adf3b2a2 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -1,1202 +1,109 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
 CONFIG_BF532=y
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF561 is not set
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
 CONFIG_BF_REV_0_5=y
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC32M16A2TG_75=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_BFIN532_IP0X is not set
 CONFIG_BLACKSTAMP=y
-# CONFIG_GENERIC_BF533_BOARD is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
 CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-# CONFIG_PLL_BYPASS is not set
-# CONFIG_CLKIN_HALF is not set
-CONFIG_VCO_MULT=16
-CONFIG_CCLK_DIV_1=y
-# CONFIG_CCLK_DIV_2 is not set
-# CONFIG_CCLK_DIV_4 is not set
-# CONFIG_CCLK_DIV_8 is not set
-CONFIG_SCLK_DIV=3
-CONFIG_MAX_MEM_SIZE=64
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Memory Setup
-#
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-# CONFIG_RAMKERNEL is not set
 CONFIG_ROMKERNEL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchonous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0xAAC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-
-#
-# Possible Suspend Mem / Hibernate Wake-Up Sources
-#
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 # CONFIG_M25PXX_USE_FAST_READ is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
+CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-CONFIG_BF5xx_PPI=y
-CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-CONFIG_EEPROM_AT25=y
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_SPI=y
-# CONFIG_SPI_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=y
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_SAMPLES is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_MMRS=y
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 4432150d89e3..f3414244bfed 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -1,1537 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
 CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
 CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
 CONFIG_BF527=y
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
 CONFIG_BF_REV_0_1=y
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF52x=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
 CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-# CONFIG_BFIN527_EZKIT is not set
 CONFIG_BFIN527_BLUETECHNIX_CM=y
-# CONFIG_BFIN526_EZBRD is not set
-
-#
-# BF527 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF527_SPORT0_PORTF is not set
-CONFIG_BF527_SPORT0_PORTG=y
-CONFIG_BF527_SPORT0_TSCLK_PG10=y
-# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF527_UART1_PORTF=y
-# CONFIG_BF527_UART1_PORTG is not set
-# CONFIG_BF527_NAND_D_PORTF is not set
-CONFIG_BF527_NAND_D_PORTH=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_SPI=10
-CONFIG_IRQ_SPI_ERROR=7
-CONFIG_IRQ_NFC_ERROR=7
-CONFIG_IRQ_HDMA_ERROR=7
-CONFIG_IRQ_HDMA=7
-CONFIG_IRQ_USB_EINT=10
 CONFIG_IRQ_USB_INT0=11
 CONFIG_IRQ_USB_INT1=11
 CONFIG_IRQ_USB_INT2=11
 CONFIG_IRQ_USB_DMA=11
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
 # CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0xFFC0
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_GPIO_ADDR=y
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-CONFIG_BFIN_MAC_RMII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_BLACKFIN_TWI=m
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-# CONFIG_USB_MUSB_HOST is not set
 CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_CPLB_INFO is not set
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index df56639ab2f2..8c7e08f173d4 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -1,920 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
 CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
 CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-CONFIG_BF533=y
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=6
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BLACKSTAMP is not set
 CONFIG_BFIN533_BLUETECHNIX_CM=y
-# CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_BFIN532_IP0X is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
 CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=750000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
 CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0xFFC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_BFIN_DMA_INTERFACE is not set
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 22e565c51d66..bd3cb766d078 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -1,1220 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
 CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
 CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
 CONFIG_BF537=y
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=2
-CONFIG_BF_REV_MAX=3
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
 CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_SPI=10
-# CONFIG_BFIN537_STAMP is not set
 CONFIG_BFIN537_BLUETECHNIX_CM_E=y
-# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
-# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_CAMSIG_MINOTAUR is not set
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
 CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0xFFC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_GPIO_ADDR=y
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_BFIN_MAC_RMII is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=y
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-CONFIG_USB_GADGET_NET2272=y
-CONFIG_USB_NET2272=m
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index efcc90d2f345..82224f37c04e 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -1,1083 +1,97 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
 CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
 CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
 CONFIG_BF537=y
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=2
-CONFIG_BF_REV_MAX=3
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
 CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_SPI=10
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
 CONFIG_BFIN537_BLUETECHNIX_CM_U=y
-# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_CAMSIG_MINOTAUR is not set
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
 CONFIG_CLKIN_HZ=30000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
 CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0xFFC2
 CONFIG_BANK_3=0xFFC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_GPIO_ADDR=y
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=y
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-CONFIG_USB_GADGET_NET2272=y
-CONFIG_USB_NET2272=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 7f579cf51127..433598c6e773 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -1,1335 +1,131 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
 CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
 CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
 CONFIG_BF548_std=y
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
 CONFIG_BF_REV_ANY=y
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF54x=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_SPI0=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_CNT=8
 CONFIG_IRQ_TIMER0=11
-CONFIG_IRQ_TIMER1=11
-CONFIG_IRQ_TIMER2=11
-CONFIG_IRQ_TIMER3=11
-CONFIG_IRQ_TIMER4=11
-CONFIG_IRQ_TIMER5=11
-CONFIG_IRQ_TIMER6=11
-CONFIG_IRQ_TIMER7=11
-CONFIG_IRQ_USB_INT0=11
-CONFIG_IRQ_USB_INT1=11
-CONFIG_IRQ_USB_INT2=11
-CONFIG_IRQ_USB_DMA=11
-CONFIG_IRQ_TIMER8=11
-CONFIG_IRQ_TIMER9=11
-CONFIG_IRQ_TIMER10=11
-CONFIG_IRQ_SPORT2_RX=9
-CONFIG_IRQ_SPORT2_TX=9
-CONFIG_IRQ_SPORT3_RX=9
-CONFIG_IRQ_SPORT3_TX=9
-CONFIG_IRQ_SPI1=10
-CONFIG_IRQ_SPI2=10
-CONFIG_IRQ_TWI0=11
-CONFIG_IRQ_TWI1=11
-# CONFIG_BFIN548_EZKIT is not set
 CONFIG_BFIN548_BLUETECHNIX_CM=y
-
-#
-# BF548 Specific Configuration
-#
 # CONFIG_DEB_DMA_URGENT is not set
-# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMAC0_ERR=7
-CONFIG_IRQ_EPPI0_ERR=7
-CONFIG_IRQ_SPORT0_ERR=7
-CONFIG_IRQ_SPORT1_ERR=7
-CONFIG_IRQ_SPI0_ERR=7
-CONFIG_IRQ_UART0_ERR=7
-CONFIG_IRQ_EPPI0=8
-CONFIG_IRQ_PINT0=12
-CONFIG_IRQ_PINT1=12
-CONFIG_IRQ_MDMAS0=13
-CONFIG_IRQ_MDMAS1=13
-CONFIG_IRQ_WATCHDOG=13
-CONFIG_IRQ_DMAC1_ERR=7
-CONFIG_IRQ_SPORT2_ERR=7
-CONFIG_IRQ_SPORT3_ERR=7
-CONFIG_IRQ_MXVR_DATA=7
-CONFIG_IRQ_SPI1_ERR=7
-CONFIG_IRQ_SPI2_ERR=7
-CONFIG_IRQ_UART1_ERR=7
-CONFIG_IRQ_UART2_ERR=7
-CONFIG_IRQ_CAN0_ERR=7
-CONFIG_IRQ_EPPI1=9
-CONFIG_IRQ_EPPI2=9
-CONFIG_IRQ_ATAPI_RX=10
-CONFIG_IRQ_ATAPI_TX=10
-CONFIG_IRQ_CAN0_RX=11
-CONFIG_IRQ_CAN0_TX=11
-CONFIG_IRQ_MDMAS2=13
-CONFIG_IRQ_MDMAS3=13
-CONFIG_IRQ_MXVR_ERR=11
-CONFIG_IRQ_MXVR_MSG=11
-CONFIG_IRQ_MXVR_PKT=11
-CONFIG_IRQ_EPPI1_ERR=7
-CONFIG_IRQ_EPPI2_ERR=7
-CONFIG_IRQ_UART3_ERR=7
-CONFIG_IRQ_HOST_ERR=7
-CONFIG_IRQ_PIXC_ERR=7
-CONFIG_IRQ_NFC_ERR=7
-CONFIG_IRQ_ATAPI_ERR=7
-CONFIG_IRQ_CAN1_ERR=7
-CONFIG_IRQ_HS_DMA_ERR=7
-CONFIG_IRQ_PIXC_IN0=8
-CONFIG_IRQ_PIXC_IN1=8
-CONFIG_IRQ_PIXC_OUT=8
-CONFIG_IRQ_SDH=8
-CONFIG_IRQ_KEY=8
-CONFIG_IRQ_CAN1_RX=11
-CONFIG_IRQ_CAN1_TX=11
-CONFIG_IRQ_SDH_MASK0=11
-CONFIG_IRQ_SDH_MASK1=11
-CONFIG_IRQ_OTPSEC=11
-CONFIG_IRQ_PINT2=11
-CONFIG_IRQ_PINT3=11
-
-#
-# Pin Interrupt to Port Assignment
-#
-
-#
-# Assignment
-#
-CONFIG_PINTx_REASSIGN=y
-CONFIG_PINT0_ASSIGN=0x00000101
-CONFIG_PINT1_ASSIGN=0x01010000
-CONFIG_PINT2_ASSIGN=0x07000101
-CONFIG_PINT3_ASSIGN=0x02020303
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_GENERIC_TIME is not set
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
 # CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-# CONFIG_BFIN_L2_ICACHEABLE is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-# CONFIG_BFIN_EXTMEM_WRITEBACK
 CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
-# CONFIG_BFIN_L2_DCACHEABLE is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
-# CONFIG_C_CDPRIO is not set
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
-CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_BFIN is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_SERIAL_BFIN_DMA is not set
 CONFIG_SERIAL_BFIN_PIO=y
-# CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART2 is not set
-# CONFIG_SERIAL_BFIN_UART3 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# Blackfin high speed USB Support
-#
-# CONFIG_USB_MUSB_HOST is not set
 CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_GADGET_MUSB_HDRC=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2272 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_SDH_BFIN=m
-# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
-# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=m
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=m
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1368,174 +164,11 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index a6df01dac98a..ded7d845cb39 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -1,1155 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
 CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
 CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
 CONFIG_BF561=y
-# CONFIG_SMP is not set
-CONFIG_BF_REV_MIN=3
-CONFIG_BF_REV_MAX=5
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-CONFIG_BF_REV_0_3=y
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_MEM_MT48LC8M32B2B5_7=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
 CONFIG_IRQ_TIMER0=10
-CONFIG_IRQ_TIMER1=10
-CONFIG_IRQ_TIMER2=10
-CONFIG_IRQ_TIMER3=10
-CONFIG_IRQ_TIMER4=10
-CONFIG_IRQ_TIMER5=10
-CONFIG_IRQ_TIMER6=10
-CONFIG_IRQ_TIMER7=10
-CONFIG_IRQ_SPI_ERROR=7
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
 CONFIG_BFIN561_BLUETECHNIX_CM=y
-
-#
-# BF561 Specific Configuration
-#
-
-#
-# Core B Support
-#
-CONFIG_BF561_COREB=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA1_ERROR=7
-CONFIG_IRQ_DMA2_ERROR=7
-CONFIG_IRQ_IMDMA_ERROR=7
-CONFIG_IRQ_PPI0_ERROR=7
-CONFIG_IRQ_PPI1_ERROR=7
-CONFIG_IRQ_UART_ERROR=7
-CONFIG_IRQ_RESERVED_ERROR=7
-CONFIG_IRQ_DMA1_0=8
-CONFIG_IRQ_DMA1_1=8
-CONFIG_IRQ_DMA1_2=8
-CONFIG_IRQ_DMA1_3=8
-CONFIG_IRQ_DMA1_4=8
-CONFIG_IRQ_DMA1_5=8
-CONFIG_IRQ_DMA1_6=8
-CONFIG_IRQ_DMA1_7=8
-CONFIG_IRQ_DMA1_8=8
-CONFIG_IRQ_DMA1_9=8
-CONFIG_IRQ_DMA1_10=8
-CONFIG_IRQ_DMA1_11=8
-CONFIG_IRQ_DMA2_0=9
-CONFIG_IRQ_DMA2_1=9
-CONFIG_IRQ_DMA2_2=9
-CONFIG_IRQ_DMA2_3=9
-CONFIG_IRQ_DMA2_4=9
-CONFIG_IRQ_DMA2_5=9
-CONFIG_IRQ_DMA2_6=9
-CONFIG_IRQ_DMA2_7=9
-CONFIG_IRQ_DMA2_8=9
-CONFIG_IRQ_DMA2_9=9
-CONFIG_IRQ_DMA2_10=9
-CONFIG_IRQ_DMA2_11=9
-CONFIG_IRQ_TIMER8=10
-CONFIG_IRQ_TIMER9=10
-CONFIG_IRQ_TIMER10=10
-CONFIG_IRQ_TIMER11=10
-CONFIG_IRQ_PROG0_INTA=11
-CONFIG_IRQ_PROG0_INTB=11
-CONFIG_IRQ_PROG1_INTA=11
-CONFIG_IRQ_PROG1_INTB=11
-CONFIG_IRQ_PROG2_INTA=11
-CONFIG_IRQ_PROG2_INTB=11
-CONFIG_IRQ_DMA1_WRRD0=8
-CONFIG_IRQ_DMA1_WRRD1=8
-CONFIG_IRQ_DMA2_WRRD0=9
-CONFIG_IRQ_DMA2_WRRD1=9
-CONFIG_IRQ_IMDMA_WRRD0=12
-CONFIG_IRQ_IMDMA_WRRD1=12
-CONFIG_IRQ_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
 CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-# CONFIG_BFIN_L2_ICACHEABLE is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
 CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
-# CONFIG_BFIN_L2_DCACHEABLE is not set
-# CONFIG_BFIN_L2_WRITEBACK is not set
-# CONFIG_BFIN_L2_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-CONFIG_C_B0PEN=y
-CONFIG_C_B1PEN=y
-CONFIG_C_B2PEN=y
-# CONFIG_C_B3PEN is not set
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0xFFC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
 CONFIG_SMSC911X=m
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-CONFIG_USB_GADGET_NET2272=y
-CONFIG_USB_NET2272=m
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index ed0a7ebeb85c..700fb701c121 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -1,1168 +1,88 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.14
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF522 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
 CONFIG_BF532=y
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF561 is not set
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
 CONFIG_BF_REV_0_5=y
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
-CONFIG_MEM_MT48LC16M16A2TG_75=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
 CONFIG_H8606_HVSISTEMAS=y
-# CONFIG_GENERIC_BF533_BOARD is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
 CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-
-#
-# Memory Setup
-#
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
 # CONFIG_CACHELINE_ALIGNED_L1 is not set
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchonous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x100000
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_WIRELESS is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_BF5xx is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
 # CONFIG_M25PXX_USE_FAST_READ is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
+CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 CONFIG_DM9000=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_AX88180 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-CONFIG_BF5xx_PFLAGS=y
-# CONFIG_BF5xx_PFLAGS_PROC is not set
-# CONFIG_BF5xx_PPIFCD is not set
-CONFIG_BFIN_SIMPLE_TIMER=y
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
-CONFIG_BFIN_TIMER_LATENCY=y
-# CONFIG_AD5304 is not set
-# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_BFIN_WDT is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-CONFIG_EEPROM_AT25=y
 CONFIG_SPI_SPIDEV=y
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
+CONFIG_WATCHDOG=y
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73311 is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index a7e49d631229..b40156d217e3 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -1,1253 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.18
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
 CONFIG_BF532=y
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF561 is not set
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
 CONFIG_BF_REV_0_5=y
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
-CONFIG_MEM_MT48LC32M16A2TG_75=y
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_H8606_HVSISTEMAS is not set
 CONFIG_BFIN532_IP0X=y
-# CONFIG_GENERIC_BF533_BOARD is not set
-
-#
-# BF533/2/1 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_UART_ERROR=7
-CONFIG_SPORT0_ERROR=7
-CONFIG_SPI_ERROR=7
-CONFIG_SPORT1_ERROR=7
-CONFIG_PPI_ERROR=7
-CONFIG_DMA_ERROR=7
-CONFIG_PLLWAKE_ERROR=7
-CONFIG_RTC_ERROR=8
-CONFIG_DMA0_PPI=8
-CONFIG_DMA1_SPORT0RX=9
-CONFIG_DMA2_SPORT0TX=9
-CONFIG_DMA3_SPORT1RX=9
-CONFIG_DMA4_SPORT1TX=9
-CONFIG_DMA5_SPI=10
-CONFIG_DMA6_UARTRX=10
-CONFIG_DMA7_UARTTX=10
 CONFIG_TIMER0=11
-CONFIG_TIMER1=11
-CONFIG_TIMER2=11
-CONFIG_PFA=12
-CONFIG_PFB=12
-CONFIG_MEMDMA0=13
-CONFIG_MEMDMA1=13
-CONFIG_WDTIMER=13
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=10000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-
-#
-# Memory Setup
-#
-CONFIG_MAX_MEM_SIZE=64
-CONFIG_MEM_ADD_WIDTH=10
-
-#
-# Hardware addresses
-#
-CONFIG_IP0X_NET1=0x20100000
-CONFIG_IP0X_NET2=0x20200000
-CONFIG_IP0X_USB=0x20300000
-CONFIG_BOOT_LOAD=0x1000
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
 # CONFIG_BFIN_ICACHE is not set
 # CONFIG_BFIN_DCACHE is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_L1_MAX_PIECE=16
-# CONFIG_MPU is not set
-
-#
-# Asynchonous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
 CONFIG_BANK_0=0xffc2
 CONFIG_BANK_1=0xffc2
 CONFIG_BANK_2=0xffc2
 CONFIG_BANK_3=0xffc2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_BFIN_SLEEP_DEEPER=y
-# CONFIG_PM_BFIN_SLEEP is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=y
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
 CONFIG_NETFILTER_XT_MATCH_MAC=y
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_IPRANGE=y
-CONFIG_IP_NF_MATCH_TOS=y
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
 CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
+# CONFIG_WIRELESS is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_UCLINUX=y
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=y
-CONFIG_BFIN_NAND_BASE=0x20000000
-CONFIG_BFIN_NAND_SIZE=0x10000000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=10
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
 CONFIG_DM9000=y
 # CONFIG_NETDEV_1000 is not set
-# CONFIG_AX88180 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
-# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
-CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_BFIN_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_WATCHDOG=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_ISP1362_HCD=y
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_SPI_MMC=m
-CONFIG_SPI_MMC_FRAMEWORK_DRIVER=y
-# CONFIG_SPI_MMC_BFIN_PIO_SPI is not set
-CONFIG_SPI_MMC_CS_CHAN=5
-CONFIG_SPI_MMC_MAX_HZ=20000000
-# CONFIG_SPI_MMC_CARD_DETECT is not set
-# CONFIG_SPI_MMC_DEBUG_MODE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-# CONFIG_SECURITY_ROOTPLUG is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index ad58fede1f41..be866d95ed76 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -1,1419 +1,113 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
 CONFIG_BF537=y
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=2
-CONFIG_BF_REV_MAX=3
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_MEM_MT48LC32M8A2_75=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
 CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_SPI=10
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
-# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
 CONFIG_PNAV10=y
-# CONFIG_CAMSIG_MINOTAUR is not set
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=24576000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
 CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=y
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x33B0
 CONFIG_BANK_2=0x33B0
 CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_GPIO_ADDR is not set
 CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_BFIN_MAC=y
 # CONFIG_BFIN_MAC_USE_L1 is not set
 CONFIG_BFIN_TX_DESC_NUM=100
 CONFIG_BFIN_RX_DESC_NUM=100
-CONFIG_BFIN_MAC_RMII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TWI_LCD is not set
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_BFIN_LQ035Q1 is not set
-CONFIG_FB_BF537_LQ035=y
-# CONFIG_FB_BFIN_7393 is not set
-# CONFIG_FB_HITACHI_TX09 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-# CONFIG_BACKLIGHT_ADP8870 is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73322 is not set
-# CONFIG_SND_SOC is not set
 CONFIG_SOUND_PRIME=y
-CONFIG_HID_SUPPORT=y
 # CONFIG_HID is not set
-# CONFIG_HID_PID is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_DOUBLEFAULT is not set
 # CONFIG_DEBUG_HUNT_FOR_ZERO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_CPLB_INFO is not set
 # CONFIG_ACCESS_CHECK is not set
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 52bfa6bf18da..b64bdf759b82 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -1,1297 +1,89 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.10
-# Fri Nov  2 20:50:23 2007
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_ZONE_DMA=y
-CONFIG_BFIN=y
-CONFIG_SEMAPHORE_SLEEPERS=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_IRQCHIP_DEMUX_GPIO=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF522 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
 CONFIG_BF537=y
-# CONFIG_BF542 is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF561 is not set
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
-# CONFIG_BFIN527_EZKIT is not set
-# CONFIG_BFIN533_EZKIT is not set
-# CONFIG_BFIN533_STAMP is not set
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_BFIN533_BLUETECHNIX_CM is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
-# CONFIG_BFIN548_EZKIT is not set
-# CONFIG_BFIN561_BLUETECHNIX_CM is not set
-# CONFIG_BFIN561_EZKIT is not set
-# CONFIG_BFIN561_TEPLA is not set
-# CONFIG_PNAV10 is not set
-# CONFIG_VISTASCAN is not set
-# CONFIG_BFIN533_SR3K is not set
-CONFIG_GENERIC_BOARD=y
-CONFIG_MEM_GENERIC_BOARD=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
 CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=22118400
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-
-#
-# Memory Setup
-#
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
 CONFIG_BOOT_LOAD=0x400000
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_CLKIN_HZ=22118400
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_DMA_UNCACHED_2M=y
-# CONFIG_DMA_UNCACHED_1M is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchonous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
-# CONFIG_PM_WAKEUP_GPIO_API is not set
-CONFIG_PM_WAKEUP_SIC_IWR=0x80000000
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_WIRELESS is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
 CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_MW320D=m
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_SIZE=0x400000
-CONFIG_EBIU_FLASH_BASE=0x20000000
 CONFIG_MTD_UCLINUX=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_BFIN=m
-CONFIG_BFIN_NAND_BASE=0x20212000
-CONFIG_BFIN_NAND_CLE=2
-CONFIG_BFIN_NAND_ALE=1
-CONFIG_BFIN_NAND_READY=3
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
+CONFIG_EEPROM_AT25=m
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_BF53X_PFBUTTONS is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-CONFIG_BF5xx_PFLAGS=y
-# CONFIG_BF5xx_PFLAGS_PROC is not set
-# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BF5xx_TIMERS is not set
-# CONFIG_BF5xx_PPI is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-# CONFIG_AD5304 is not set
-# CONFIG_BF5xx_TEA5764 is not set
-# CONFIG_BF5xx_FBDMA is not set
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
-CONFIG_HW_RANDOM=m
-# CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_BLACKFIN_GPIO is not set
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-CONFIG_EEPROM_AT25=m
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 CONFIG_HWMON=m
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_PPI_GENERIC is not set
-CONFIG_VIDEO_BLACKFIN_CAM=m
-# CONFIG_VIDEO_BLACKFIN_MT9M001 is not set
-
-#
-# CMOS Camera Sensor Selection
-#
-# CONFIG_MT9V022 is not set
-# CONFIG_MT9M001 is not set
-# CONFIG_VS6524 is not set
-# CONFIG_VS6624 is not set
-CONFIG_OV9655=y
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_WATCHDOG=y
+CONFIG_BFIN_WDT=y
 # CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HWERR is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig
index 4d31e2a4ed46..1bccd9a50986 100644
--- a/arch/blackfin/configs/TCM-BF518_defconfig
+++ b/arch/blackfin/configs/TCM-BF518_defconfig
@@ -1,1375 +1,133 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.3
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
 CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
 CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
 CONFIG_BF518=y
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
-# CONFIG_BF537 is not set
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542_std is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544_std is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547_std is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548_std is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549_std is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=0
-CONFIG_BF_REV_MAX=2
-# CONFIG_BF_REV_0_0 is not set
 CONFIG_BF_REV_0_1=y
-# CONFIG_BF_REV_0_2 is not set
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF51x=y
-# CONFIG_BFIN518F_EZBRD is not set
 CONFIG_BFIN518F_TCM=y
-
-#
-# BF518 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF518_SPORT0_PORTF is not set
-CONFIG_BF518_SPORT0_PORTG=y
-CONFIG_BF518_SPORT0_TSCLK_PG10=y
-# CONFIG_BF518_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF518_UART1_PORTF=y
-# CONFIG_BF518_UART1_PORTG is not set
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_DMA0_ERROR=7
-CONFIG_IRQ_DMAR0_BLK=7
-CONFIG_IRQ_DMAR1_BLK=7
-CONFIG_IRQ_DMAR0_OVR=7
-CONFIG_IRQ_DMAR1_OVR=7
-CONFIG_IRQ_PPI_ERROR=7
-CONFIG_IRQ_MAC_ERROR=7
-CONFIG_IRQ_SPORT0_ERROR=7
-CONFIG_IRQ_SPORT1_ERROR=7
-CONFIG_IRQ_PTP_ERROR=7
-CONFIG_IRQ_UART0_ERROR=7
-CONFIG_IRQ_UART1_ERROR=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI0=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_OPTSEC=11
-CONFIG_IRQ_CNT=11
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_PORTH_INTA=11
-CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_PORTH_INTB=11
 CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTA=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_PORTF_INTA=13
-CONFIG_IRQ_PORTF_INTB=13
-CONFIG_IRQ_SPI0_ERROR=7
-CONFIG_IRQ_SPI1_ERROR=7
-CONFIG_IRQ_RSI_INT0=7
-CONFIG_IRQ_RSI_INT1=7
-CONFIG_IRQ_PWM_TRIP=10
-CONFIG_IRQ_PWM_SYNC=10
-CONFIG_IRQ_PTP_STAT=10
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=400000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-
-#
-# Clock event device
-#
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
-
-#
-# Clock souce
-#
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
 # CONFIG_SCHEDULE_L1 is not set
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
-# CONFIG_IP_CHECKSUM_L1 is not set
-CONFIG_CACHELINE_ALIGNED_L1=y
-# CONFIG_SYSCALL_TAB_L1 is not set
-# CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BFIN_GPTIMERS=m
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_512K is not set
-# CONFIG_DMA_UNCACHED_256K is not set
-# CONFIG_DMA_UNCACHED_128K is not set
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0x99B2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_BFIN_MAC=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_BFIN_MAC_RMII is not set
-CONFIG_BFIN_MAC_USE_HWSTAMP=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_ADF702X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
-# CONFIG_SERIAL_BFIN_UART1 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-CONFIG_SPI_BFIN_LOCK=y
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_SDH_BFIN is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_BFIN=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_SIGMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_NOMMU_REGIONS is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HWERR=y
 CONFIG_EXACT_HWERR=y
 CONFIG_DEBUG_DOUBLEFAULT=y
-CONFIG_DEBUG_DOUBLEFAULT_PRINT=y
-# CONFIG_DEBUG_DOUBLEFAULT_RESET is not set
-# CONFIG_DEBUG_ICACHE_CHECK is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF is not set
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=1
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
-CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 60adfad54db9..00ce899e9e5d 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -1,1180 +1,96 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30.5
-#
-# CONFIG_MMU is not set
-# CONFIG_FPU is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_BLACKFIN=y
-CONFIG_GENERIC_BUG=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_FORCE_MAX_ZONEORDER=14
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
 CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_RD_GZIP is not set
-# CONFIG_RD_BZIP2 is not set
 CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_FREEZER is not set
-
-#
-# Blackfin Processor Options
-#
-
-#
-# Processor and Board Settings
-#
-# CONFIG_BF512 is not set
-# CONFIG_BF514 is not set
-# CONFIG_BF516 is not set
-# CONFIG_BF518 is not set
-# CONFIG_BF522 is not set
-# CONFIG_BF523 is not set
-# CONFIG_BF524 is not set
-# CONFIG_BF525 is not set
-# CONFIG_BF526 is not set
-# CONFIG_BF527 is not set
-# CONFIG_BF531 is not set
-# CONFIG_BF532 is not set
-# CONFIG_BF533 is not set
-# CONFIG_BF534 is not set
-# CONFIG_BF536 is not set
 CONFIG_BF537=y
-# CONFIG_BF538 is not set
-# CONFIG_BF539 is not set
-# CONFIG_BF542 is not set
-# CONFIG_BF542M is not set
-# CONFIG_BF544 is not set
-# CONFIG_BF544M is not set
-# CONFIG_BF547 is not set
-# CONFIG_BF547M is not set
-# CONFIG_BF548 is not set
-# CONFIG_BF548M is not set
-# CONFIG_BF549 is not set
-# CONFIG_BF549M is not set
-# CONFIG_BF561 is not set
-CONFIG_BF_REV_MIN=2
-CONFIG_BF_REV_MAX=3
-# CONFIG_BF_REV_0_0 is not set
-# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
-# CONFIG_BF_REV_0_3 is not set
-# CONFIG_BF_REV_0_4 is not set
-# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_0_6 is not set
-# CONFIG_BF_REV_ANY is not set
-# CONFIG_BF_REV_NONE is not set
-CONFIG_BF53x=y
-CONFIG_IRQ_PLL_WAKEUP=7
-CONFIG_IRQ_RTC=8
-CONFIG_IRQ_PPI=8
-CONFIG_IRQ_SPORT0_RX=9
-CONFIG_IRQ_SPORT0_TX=9
-CONFIG_IRQ_SPORT1_RX=9
-CONFIG_IRQ_SPORT1_TX=9
-CONFIG_IRQ_TWI=10
-CONFIG_IRQ_UART0_RX=10
-CONFIG_IRQ_UART0_TX=10
-CONFIG_IRQ_UART1_RX=10
-CONFIG_IRQ_UART1_TX=10
-CONFIG_IRQ_MAC_RX=11
-CONFIG_IRQ_MAC_TX=11
 CONFIG_IRQ_TIMER0=12
-CONFIG_IRQ_TIMER1=12
-CONFIG_IRQ_TIMER2=12
-CONFIG_IRQ_TIMER3=12
-CONFIG_IRQ_TIMER4=12
-CONFIG_IRQ_TIMER5=12
-CONFIG_IRQ_TIMER6=12
-CONFIG_IRQ_TIMER7=12
-CONFIG_IRQ_PORTG_INTB=12
-CONFIG_IRQ_MEM_DMA0=13
-CONFIG_IRQ_MEM_DMA1=13
-CONFIG_IRQ_WATCH=13
-CONFIG_IRQ_SPI=10
-# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
 CONFIG_BFIN537_BLUETECHNIX_TCM=y
-# CONFIG_PNAV10 is not set
-# CONFIG_CAMSIG_MINOTAUR is not set
-
-#
-# BF537 Specific Configuration
-#
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
-CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
-CONFIG_IRQ_CAN_RX=11
-CONFIG_IRQ_CAN_TX=11
-CONFIG_IRQ_PROG_INTA=12
-
-#
-# Board customizations
-#
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_BOOT_LOAD=0x1000
-
-#
-# Clock/PLL Setup
-#
-CONFIG_CLKIN_HZ=25000000
-# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_VCO_HZ=600000000
-CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133333333
-CONFIG_MIN_SCLK_HZ=27000000
-
-#
-# Kernel Timer/Scheduler
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-# CONFIG_TICKSOURCE_GPTMR0 is not set
-CONFIG_TICKSOURCE_CORETMR=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_GPTMR0_CLOCKSOURCE is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-
-#
-# Misc
-#
-CONFIG_BFIN_SCRATCH_REG_RETN=y
-# CONFIG_BFIN_SCRATCH_REG_RETE is not set
-# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
-
-#
-# Blackfin Kernel Optimizations
-#
-
-#
-# Memory Optimizations
-#
-CONFIG_I_ENTRY_L1=y
-CONFIG_EXCPT_IRQ_SYSC_L1=y
-CONFIG_DO_IRQ_L1=y
-CONFIG_CORE_TIMER_IRQ_L1=y
-CONFIG_IDLE_L1=y
-CONFIG_SCHEDULE_L1=y
-CONFIG_ARITHMETIC_OPS_L1=y
-CONFIG_ACCESS_OK_L1=y
-CONFIG_MEMSET_L1=y
-CONFIG_MEMCPY_L1=y
-CONFIG_SYS_BFIN_SPINLOCK_L1=y
 CONFIG_IP_CHECKSUM_L1=y
-CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
-
-#
-# Speed Optimizations
-#
-CONFIG_BFIN_INS_LOWOVERHEAD=y
-CONFIG_RAMKERNEL=y
-# CONFIG_ROMKERNEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
-# CONFIG_BFIN_GPTIMERS is not set
-# CONFIG_DMA_UNCACHED_4M is not set
-# CONFIG_DMA_UNCACHED_2M is not set
-CONFIG_DMA_UNCACHED_1M=y
-# CONFIG_DMA_UNCACHED_NONE is not set
-
-#
-# Cache Support
-#
-CONFIG_BFIN_ICACHE=y
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
-CONFIG_BFIN_DCACHE=y
-# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-
-#
-# Memory Protection Unit
-#
-# CONFIG_MPU is not set
-
-#
-# Asynchronous Memory Configuration
-#
-
-#
-# EBIU_AMGCTL Global Control
-#
-CONFIG_C_AMCKEN=y
 CONFIG_C_CDPRIO=y
-# CONFIG_C_AMBEN is not set
-# CONFIG_C_AMBEN_B0 is not set
-# CONFIG_C_AMBEN_B0_B1 is not set
-# CONFIG_C_AMBEN_B0_B1_B2 is not set
-CONFIG_C_AMBEN_ALL=y
-
-#
-# EBIU_AMBCTL Control
-#
-CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0x7BB0
 CONFIG_BANK_3=0xFFC2
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_PSD4256G is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=m
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_GPIO_ADDR=y
-# CONFIG_MTD_UCLINUX is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_BFIN_MAC=y
-CONFIG_BFIN_MAC_USE_L1=y
-CONFIG_BFIN_TX_DESC_NUM=10
-CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_BFIN_MAC_RMII is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
+# CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_BFIN_PPI is not set
-# CONFIG_BFIN_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BFIN_SPI_ADC is not set
-CONFIG_BFIN_SPORT=y
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
 CONFIG_SERIAL_BFIN_UART0=y
-# CONFIG_BFIN_UART0_CTSRTS is not set
 CONFIG_SERIAL_BFIN_UART1=y
-# CONFIG_BFIN_UART1_CTSRTS is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_BFIN_SPORT is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# CAN, the car bus and industrial fieldbus
-#
-# CONFIG_CAN4LINUX is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BFIN=y
-# CONFIG_SPI_BFIN_LOCK is not set
-# CONFIG_SPI_BFIN_SPORT is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-CONFIG_USB_GADGET_NET2272=y
-CONFIG_USB_NET2272=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_DOUBLEFAULT is not set
-CONFIG_DEBUG_HUNT_FOR_ZERO=y
-CONFIG_DEBUG_BFIN_HWTRACE_ON=y
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
-# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
-CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
-# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
 # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
-CONFIG_ACCESS_CHECK=y
-# CONFIG_BFIN_ISRAM_SELF_TEST is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index 09c31418cc08..9e7c5379d3ff 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -1,4 +1,5 @@
 include include/asm-generic/Kbuild.asm
 
-unifdef-y += bfin_sport.h
-unifdef-y += fixed_code.h
+header-y += bfin_sport.h
+header-y += cachectl.h
+header-y += fixed_code.h
diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h
index ed4f8c6db0cd..5392583d0253 100644
--- a/arch/blackfin/include/asm/bfin5xx_spi.h
+++ b/arch/blackfin/include/asm/bfin5xx_spi.h
@@ -11,26 +11,17 @@
 
 #define MIN_SPI_BAUD_VAL	2
 
-#define SPI_READ              0
-#define SPI_WRITE             1
-
-#define SPI_CTRL_OFF            0x0
-#define SPI_FLAG_OFF            0x4
-#define SPI_STAT_OFF            0x8
-#define SPI_TXBUFF_OFF          0xc
-#define SPI_RXBUFF_OFF          0x10
-#define SPI_BAUD_OFF            0x14
-#define SPI_SHAW_OFF            0x18
-
-
 #define BIT_CTL_ENABLE      0x4000
 #define BIT_CTL_OPENDRAIN   0x2000
 #define BIT_CTL_MASTER      0x1000
-#define BIT_CTL_POLAR       0x0800
-#define BIT_CTL_PHASE       0x0400
-#define BIT_CTL_BITORDER    0x0200
+#define BIT_CTL_CPOL        0x0800
+#define BIT_CTL_CPHA        0x0400
+#define BIT_CTL_LSBF        0x0200
 #define BIT_CTL_WORDSIZE    0x0100
-#define BIT_CTL_MISOENABLE  0x0020
+#define BIT_CTL_EMISO       0x0020
+#define BIT_CTL_PSSE        0x0010
+#define BIT_CTL_GM          0x0008
+#define BIT_CTL_SZ          0x0004
 #define BIT_CTL_RXMOD       0x0000
 #define BIT_CTL_TXMOD       0x0001
 #define BIT_CTL_TIMOD_DMA_TX 0x0003
@@ -50,61 +41,28 @@
 #define BIT_STU_SENDOVER    0x0001
 #define BIT_STU_RECVFULL    0x0020
 
-#define CFG_SPI_ENABLE      1
-#define CFG_SPI_DISABLE     0
-
-#define CFG_SPI_OUTENABLE   1
-#define CFG_SPI_OUTDISABLE  0
-
-#define CFG_SPI_ACTLOW      1
-#define CFG_SPI_ACTHIGH     0
-
-#define CFG_SPI_PHASESTART  1
-#define CFG_SPI_PHASEMID    0
-
-#define CFG_SPI_MASTER      1
-#define CFG_SPI_SLAVE       0
-
-#define CFG_SPI_SENELAST    0
-#define CFG_SPI_SENDZERO    1
-
-#define CFG_SPI_RCVFLUSH    1
-#define CFG_SPI_RCVDISCARD  0
-
-#define CFG_SPI_LSBFIRST    1
-#define CFG_SPI_MSBFIRST    0
-
-#define CFG_SPI_WORDSIZE16  1
-#define CFG_SPI_WORDSIZE8   0
-
-#define CFG_SPI_MISOENABLE   1
-#define CFG_SPI_MISODISABLE  0
-
-#define CFG_SPI_READ      0x00
-#define CFG_SPI_WRITE     0x01
-#define CFG_SPI_DMAREAD   0x02
-#define CFG_SPI_DMAWRITE  0x03
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
 
-#define CFG_SPI_CSCLEARALL  0
-#define CFG_SPI_CHIPSEL1    1
-#define CFG_SPI_CHIPSEL2    2
-#define CFG_SPI_CHIPSEL3    3
-#define CFG_SPI_CHIPSEL4    4
-#define CFG_SPI_CHIPSEL5    5
-#define CFG_SPI_CHIPSEL6    6
-#define CFG_SPI_CHIPSEL7    7
+/*
+ * bfin spi registers layout
+ */
+struct bfin_spi_regs {
+	__BFP(ctl);
+	__BFP(flg);
+	__BFP(stat);
+	__BFP(tdbr);
+	__BFP(rdbr);
+	__BFP(baud);
+	__BFP(shadow);
+};
 
-#define CFG_SPI_CS1VALUE    1
-#define CFG_SPI_CS2VALUE    2
-#define CFG_SPI_CS3VALUE    3
-#define CFG_SPI_CS4VALUE    4
-#define CFG_SPI_CS5VALUE    5
-#define CFG_SPI_CS6VALUE    6
-#define CFG_SPI_CS7VALUE    7
+#undef __BFP
 
-#define CMD_SPI_SET_BAUDRATE  2
-#define CMD_SPI_GET_SYSTEMCLOCK   25
-#define CMD_SPI_SET_WRITECONTINUOUS     26
+#define MAX_CTRL_CS          8  /* cs in spi controller */
 
 /* device.platform_data for SSP controller devices */
 struct bfin5xx_spi_master {
@@ -120,9 +78,7 @@ struct bfin5xx_spi_chip {
 	u16 ctl_reg;
 	u8 enable_dma;
 	u8 bits_per_word;
-	u8 cs_change_per_word;
 	u16 cs_chg_udelay; /* Some devices require 16-bit delays */
-	u32 cs_gpio;
 	/* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */
 	u16 idle_tx_val;
 	u8 pio_interrupt; /* Enable spi data irq */
diff --git a/arch/blackfin/include/asm/bfin_can.h b/arch/blackfin/include/asm/bfin_can.h
index eec0076a385b..b1492e0bcabb 100644
--- a/arch/blackfin/include/asm/bfin_can.h
+++ b/arch/blackfin/include/asm/bfin_can.h
@@ -34,6 +34,7 @@ struct bfin_can_mask_regs {
 };
 
 struct bfin_can_channel_regs {
+	/* data[0,2,4,6] -> data{0,1,2,3} while data[1,3,5,7] is padding */
 	u16 data[8];
 	__BFP(dlc);
 	__BFP(tsv);
@@ -83,16 +84,18 @@ struct bfin_can_regs {
 	__BFP(gif);           /* offset 0x9c */
 	__BFP(control);       /* offset 0xa0 */
 	__BFP(intr);          /* offset 0xa4 */
-	u32 __pad3[1];
+	__BFP(version);       /* offset 0xa8 */
 	__BFP(mbtd);          /* offset 0xac */
 	__BFP(ewr);           /* offset 0xb0 */
 	__BFP(esr);           /* offset 0xb4 */
-	u32 __pad4[2];
+	u32 __pad3[2];
 	__BFP(ucreg);         /* offset 0xc0 */
 	__BFP(uccnt);         /* offset 0xc4 */
 	__BFP(ucrc);          /* offset 0xc8 */
 	__BFP(uccnf);         /* offset 0xcc */
-	u32 __pad5[12];
+	u32 __pad4[1];
+	__BFP(version2);      /* offset 0xd4 */
+	u32 __pad5[10];
 
 	/*
 	 * channel(mailbox) mask and message registers
diff --git a/arch/blackfin/include/asm/bfin_ppi.h b/arch/blackfin/include/asm/bfin_ppi.h
new file mode 100644
index 000000000000..3be05faa2c65
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_ppi.h
@@ -0,0 +1,53 @@
+/*
+ * bfin_ppi.h - interface to Blackfin PPIs
+ *
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_PPI_H__
+#define __ASM_BFIN_PPI_H__
+
+#include <linux/types.h>
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin ppi registers layout
+ */
+struct bfin_ppi_regs {
+	__BFP(control);
+	__BFP(status);
+	__BFP(count);
+	__BFP(delay);
+	__BFP(frame);
+};
+
+/*
+ * bfin eppi registers layout
+ */
+struct bfin_eppi_regs {
+	__BFP(status);
+	__BFP(hcount);
+	__BFP(hdelay);
+	__BFP(vcount);
+	__BFP(vdelay);
+	__BFP(frame);
+	__BFP(line);
+	__BFP(clkdiv);
+	u32 control;
+	u32 fs1w_hbl;
+	u32 fs1p_avpl;
+	u32 fs2w_lvb;
+	u32 fs2p_lavf;
+	u32 clip;
+};
+
+#undef __BFP
+
+#endif
diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h
index abdb2af52902..0b6910bdc57f 100644
--- a/arch/blackfin/include/asm/bfin_rotary.h
+++ b/arch/blackfin/include/asm/bfin_rotary.h
@@ -2,7 +2,7 @@
  * board initialization should put one of these structures into platform_data
  * and place the bfin-rotary onto platform_bus named "bfin-rotary".
  *
- * Copyright 2008 Analog Devices Inc.
+ * Copyright 2008-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -40,4 +40,76 @@ struct bfin_rotary_platform_data {
 	unsigned short debounce;	/* 0..17 */
 	unsigned short mode;
 };
+
+/* CNT_CONFIG bitmasks */
+#define CNTE		(1 << 0)	/* Counter Enable */
+#define DEBE		(1 << 1)	/* Debounce Enable */
+#define CDGINV		(1 << 4)	/* CDG Pin Polarity Invert */
+#define CUDINV		(1 << 5)	/* CUD Pin Polarity Invert */
+#define CZMINV		(1 << 6)	/* CZM Pin Polarity Invert */
+#define CNTMODE_SHIFT	8
+#define CNTMODE		(0x7 << CNTMODE_SHIFT)	/* Counter Operating Mode */
+#define ZMZC		(1 << 1)	/* CZM Zeroes Counter Enable */
+#define BNDMODE_SHIFT	12
+#define BNDMODE		(0x3 << BNDMODE_SHIFT)	/* Boundary register Mode */
+#define INPDIS		(1 << 15)	/* CUG and CDG Input Disable */
+
+#define CNTMODE_QUADENC	(0 << CNTMODE_SHIFT)	/* quadrature encoder mode */
+#define CNTMODE_BINENC	(1 << CNTMODE_SHIFT)	/* binary encoder mode */
+#define CNTMODE_UDCNT	(2 << CNTMODE_SHIFT)	/* up/down counter mode */
+#define CNTMODE_DIRCNT	(4 << CNTMODE_SHIFT)	/* direction counter mode */
+#define CNTMODE_DIRTMR	(5 << CNTMODE_SHIFT)	/* direction timer mode */
+
+#define BNDMODE_COMP	(0 << BNDMODE_SHIFT)	/* boundary compare mode */
+#define BNDMODE_ZERO	(1 << BNDMODE_SHIFT)	/* boundary compare and zero mode */
+#define BNDMODE_CAPT	(2 << BNDMODE_SHIFT)	/* boundary capture mode */
+#define BNDMODE_AEXT	(3 << BNDMODE_SHIFT)	/* boundary auto-extend mode */
+
+/* CNT_IMASK bitmasks */
+#define ICIE		(1 << 0)	/* Illegal Gray/Binary Code Interrupt Enable */
+#define UCIE		(1 << 1)	/* Up count Interrupt Enable */
+#define DCIE		(1 << 2)	/* Down count Interrupt Enable */
+#define MINCIE		(1 << 3)	/* Min Count Interrupt Enable */
+#define MAXCIE		(1 << 4)	/* Max Count Interrupt Enable */
+#define COV31IE		(1 << 5)	/* Bit 31 Overflow Interrupt Enable */
+#define COV15IE		(1 << 6)	/* Bit 15 Overflow Interrupt Enable */
+#define CZEROIE		(1 << 7)	/* Count to Zero Interrupt Enable */
+#define CZMIE		(1 << 8)	/* CZM Pin Interrupt Enable */
+#define CZMEIE		(1 << 9)	/* CZM Error Interrupt Enable */
+#define CZMZIE		(1 << 10)	/* CZM Zeroes Counter Interrupt Enable */
+
+/* CNT_STATUS bitmasks */
+#define ICII		(1 << 0)	/* Illegal Gray/Binary Code Interrupt Identifier */
+#define UCII		(1 << 1)	/* Up count Interrupt Identifier */
+#define DCII		(1 << 2)	/* Down count Interrupt Identifier */
+#define MINCII		(1 << 3)	/* Min Count Interrupt Identifier */
+#define MAXCII		(1 << 4)	/* Max Count Interrupt Identifier */
+#define COV31II		(1 << 5)	/* Bit 31 Overflow Interrupt Identifier */
+#define COV15II		(1 << 6)	/* Bit 15 Overflow Interrupt Identifier */
+#define CZEROII		(1 << 7)	/* Count to Zero Interrupt Identifier */
+#define CZMII		(1 << 8)	/* CZM Pin Interrupt Identifier */
+#define CZMEII		(1 << 9)	/* CZM Error Interrupt Identifier */
+#define CZMZII		(1 << 10)	/* CZM Zeroes Counter Interrupt Identifier */
+
+/* CNT_COMMAND bitmasks */
+#define W1LCNT		0xf		/* Load Counter Register */
+#define W1LMIN		0xf0		/* Load Min Register */
+#define W1LMAX		0xf00		/* Load Max Register */
+#define W1ZMONCE	(1 << 12)	/* Enable CZM Clear Counter Once */
+
+#define W1LCNT_ZERO	(1 << 0)	/* write 1 to load CNT_COUNTER with zero */
+#define W1LCNT_MIN	(1 << 2)	/* write 1 to load CNT_COUNTER from CNT_MIN */
+#define W1LCNT_MAX	(1 << 3)	/* write 1 to load CNT_COUNTER from CNT_MAX */
+
+#define W1LMIN_ZERO	(1 << 4)	/* write 1 to load CNT_MIN with zero */
+#define W1LMIN_CNT	(1 << 5)	/* write 1 to load CNT_MIN from CNT_COUNTER */
+#define W1LMIN_MAX	(1 << 7)	/* write 1 to load CNT_MIN from CNT_MAX */
+
+#define W1LMAX_ZERO	(1 << 8)	/* write 1 to load CNT_MAX with zero */
+#define W1LMAX_CNT	(1 << 9)	/* write 1 to load CNT_MAX from CNT_COUNTER */
+#define W1LMAX_MIN	(1 << 10)	/* write 1 to load CNT_MAX from CNT_MIN */
+
+/* CNT_DEBOUNCE bitmasks */
+#define DPRESCALE	0xf		/* Load Counter Register */
+
 #endif
diff --git a/arch/blackfin/include/asm/bfin_sdh.h b/arch/blackfin/include/asm/bfin_sdh.h
index d61d5497c590..6a4cfe2d3367 100644
--- a/arch/blackfin/include/asm/bfin_sdh.h
+++ b/arch/blackfin/include/asm/bfin_sdh.h
@@ -1,7 +1,7 @@
 /*
- * bfin_sdh.h - Blackfin SDH definitions
+ * Blackfin Secure Digital Host (SDH) definitions
  *
- * Copyright 2008 Analog Devices Inc.
+ * Copyright 2008-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -9,6 +9,7 @@
 #ifndef __BFIN_SDH_H__
 #define __BFIN_SDH_H__
 
+/* Platform resources */
 struct bfin_sd_host {
 	int dma_chan;
 	int irq_int0;
@@ -16,4 +17,118 @@ struct bfin_sd_host {
 	u16 pin_req[7];
 };
 
+/* SDH_COMMAND bitmasks */
+#define CMD_IDX            0x3f        /* Command Index */
+#define CMD_RSP            (1 << 6)    /* Response */
+#define CMD_L_RSP          (1 << 7)    /* Long Response */
+#define CMD_INT_E          (1 << 8)    /* Command Interrupt */
+#define CMD_PEND_E         (1 << 9)    /* Command Pending */
+#define CMD_E              (1 << 10)   /* Command Enable */
+
+/* SDH_PWR_CTL bitmasks */
+#define PWR_ON             0x3         /* Power On */
+#define SD_CMD_OD          (1 << 6)    /* Open Drain Output */
+#define ROD_CTL            (1 << 7)    /* Rod Control */
+
+/* SDH_CLK_CTL bitmasks */
+#define CLKDIV             0xff        /* MC_CLK Divisor */
+#define CLK_E              (1 << 8)    /* MC_CLK Bus Clock Enable */
+#define PWR_SV_E           (1 << 9)    /* Power Save Enable */
+#define CLKDIV_BYPASS      (1 << 10)   /* Bypass Divisor */
+#define WIDE_BUS           (1 << 11)   /* Wide Bus Mode Enable */
+
+/* SDH_RESP_CMD bitmasks */
+#define RESP_CMD           0x3f        /* Response Command */
+
+/* SDH_DATA_CTL bitmasks */
+#define DTX_E              (1 << 0)    /* Data Transfer Enable */
+#define DTX_DIR            (1 << 1)    /* Data Transfer Direction */
+#define DTX_MODE           (1 << 2)    /* Data Transfer Mode */
+#define DTX_DMA_E          (1 << 3)    /* Data Transfer DMA Enable */
+#define DTX_BLK_LGTH       (0xf << 4)  /* Data Transfer Block Length */
+
+/* SDH_STATUS bitmasks */
+#define CMD_CRC_FAIL       (1 << 0)    /* CMD CRC Fail */
+#define DAT_CRC_FAIL       (1 << 1)    /* Data CRC Fail */
+#define CMD_TIME_OUT       (1 << 2)    /* CMD Time Out */
+#define DAT_TIME_OUT       (1 << 3)    /* Data Time Out */
+#define TX_UNDERRUN        (1 << 4)    /* Transmit Underrun */
+#define RX_OVERRUN         (1 << 5)    /* Receive Overrun */
+#define CMD_RESP_END       (1 << 6)    /* CMD Response End */
+#define CMD_SENT           (1 << 7)    /* CMD Sent */
+#define DAT_END            (1 << 8)    /* Data End */
+#define START_BIT_ERR      (1 << 9)    /* Start Bit Error */
+#define DAT_BLK_END        (1 << 10)   /* Data Block End */
+#define CMD_ACT            (1 << 11)   /* CMD Active */
+#define TX_ACT             (1 << 12)   /* Transmit Active */
+#define RX_ACT             (1 << 13)   /* Receive Active */
+#define TX_FIFO_STAT       (1 << 14)   /* Transmit FIFO Status */
+#define RX_FIFO_STAT       (1 << 15)   /* Receive FIFO Status */
+#define TX_FIFO_FULL       (1 << 16)   /* Transmit FIFO Full */
+#define RX_FIFO_FULL       (1 << 17)   /* Receive FIFO Full */
+#define TX_FIFO_ZERO       (1 << 18)   /* Transmit FIFO Empty */
+#define RX_DAT_ZERO        (1 << 19)   /* Receive FIFO Empty */
+#define TX_DAT_RDY         (1 << 20)   /* Transmit Data Available */
+#define RX_FIFO_RDY        (1 << 21)   /* Receive Data Available */
+
+/* SDH_STATUS_CLR bitmasks */
+#define CMD_CRC_FAIL_STAT  (1 << 0)    /* CMD CRC Fail Status */
+#define DAT_CRC_FAIL_STAT  (1 << 1)    /* Data CRC Fail Status */
+#define CMD_TIMEOUT_STAT   (1 << 2)    /* CMD Time Out Status */
+#define DAT_TIMEOUT_STAT   (1 << 3)    /* Data Time Out status */
+#define TX_UNDERRUN_STAT   (1 << 4)    /* Transmit Underrun Status */
+#define RX_OVERRUN_STAT    (1 << 5)    /* Receive Overrun Status */
+#define CMD_RESP_END_STAT  (1 << 6)    /* CMD Response End Status */
+#define CMD_SENT_STAT      (1 << 7)    /* CMD Sent Status */
+#define DAT_END_STAT       (1 << 8)    /* Data End Status */
+#define START_BIT_ERR_STAT (1 << 9)    /* Start Bit Error Status */
+#define DAT_BLK_END_STAT   (1 << 10)   /* Data Block End Status */
+
+/* SDH_MASK0 bitmasks */
+#define CMD_CRC_FAIL_MASK  (1 << 0)    /* CMD CRC Fail Mask */
+#define DAT_CRC_FAIL_MASK  (1 << 1)    /* Data CRC Fail Mask */
+#define CMD_TIMEOUT_MASK   (1 << 2)    /* CMD Time Out Mask */
+#define DAT_TIMEOUT_MASK   (1 << 3)    /* Data Time Out Mask */
+#define TX_UNDERRUN_MASK   (1 << 4)    /* Transmit Underrun Mask */
+#define RX_OVERRUN_MASK    (1 << 5)    /* Receive Overrun Mask */
+#define CMD_RESP_END_MASK  (1 << 6)    /* CMD Response End Mask */
+#define CMD_SENT_MASK      (1 << 7)    /* CMD Sent Mask */
+#define DAT_END_MASK       (1 << 8)    /* Data End Mask */
+#define START_BIT_ERR_MASK (1 << 9)    /* Start Bit Error Mask */
+#define DAT_BLK_END_MASK   (1 << 10)   /* Data Block End Mask */
+#define CMD_ACT_MASK       (1 << 11)   /* CMD Active Mask */
+#define TX_ACT_MASK        (1 << 12)   /* Transmit Active Mask */
+#define RX_ACT_MASK        (1 << 13)   /* Receive Active Mask */
+#define TX_FIFO_STAT_MASK  (1 << 14)   /* Transmit FIFO Status Mask */
+#define RX_FIFO_STAT_MASK  (1 << 15)   /* Receive FIFO Status Mask */
+#define TX_FIFO_FULL_MASK  (1 << 16)   /* Transmit FIFO Full Mask */
+#define RX_FIFO_FULL_MASK  (1 << 17)   /* Receive FIFO Full Mask */
+#define TX_FIFO_ZERO_MASK  (1 << 18)   /* Transmit FIFO Empty Mask */
+#define RX_DAT_ZERO_MASK   (1 << 19)   /* Receive FIFO Empty Mask */
+#define TX_DAT_RDY_MASK    (1 << 20)   /* Transmit Data Available Mask */
+#define RX_FIFO_RDY_MASK   (1 << 21)   /* Receive Data Available Mask */
+
+/* SDH_FIFO_CNT bitmasks */
+#define FIFO_COUNT         0x7fff      /* FIFO Count */
+
+/* SDH_E_STATUS bitmasks */
+#define SDIO_INT_DET       (1 << 1)    /* SDIO Int Detected */
+#define SD_CARD_DET        (1 << 4)    /* SD Card Detect */
+
+/* SDH_E_MASK bitmasks */
+#define SDIO_MSK           (1 << 1)    /* Mask SDIO Int Detected */
+#define SCD_MSK            (1 << 6)    /* Mask Card Detect */
+
+/* SDH_CFG bitmasks */
+#define CLKS_EN            (1 << 0)    /* Clocks Enable */
+#define SD4E               (1 << 2)    /* SDIO 4-Bit Enable */
+#define MWE                (1 << 3)    /* Moving Window Enable */
+#define SD_RST             (1 << 4)    /* SDMMC Reset */
+#define PUP_SDDAT          (1 << 5)    /* Pull-up SD_DAT */
+#define PUP_SDDAT3         (1 << 6)    /* Pull-up SD_DAT3 */
+#define PD_SDDAT3          (1 << 7)    /* Pull-down SD_DAT3 */
+
+/* SDH_RD_WAIT_EN bitmasks */
+#define RWR                (1 << 0)    /* Read Wait Request */
+
 #endif
diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index 9626cf7e4251..d27600c262c2 100644
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -115,12 +115,6 @@ struct sport_register {
 
 #endif
 
-/* Workaround defBF*.h SPORT MMRs till they get cleansed */
-#undef DTYPE_NORM
-#undef SLEN
-#undef SP_WOFF
-#undef SP_WSIZE
-
 /* SPORT_TCR1 Masks */
 #define TSPEN		0x0001	/* TX enable */
 #define ITCLK		0x0002	/* Internal TX Clock Select */
diff --git a/arch/blackfin/include/asm/bfin_twi.h b/arch/blackfin/include/asm/bfin_twi.h
new file mode 100644
index 000000000000..e767d649dfc4
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_twi.h
@@ -0,0 +1,45 @@
+/*
+ * bfin_twi.h - interface to Blackfin TWIs
+ *
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_BFIN_TWI_H__
+#define __ASM_BFIN_TWI_H__
+
+#include <linux/types.h>
+
+/*
+ * All Blackfin system MMRs are padded to 32bits even if the register
+ * itself is only 16bits.  So use a helper macro to streamline this.
+ */
+#define __BFP(m) u16 m; u16 __pad_##m
+
+/*
+ * bfin twi registers layout
+ */
+struct bfin_twi_regs {
+	__BFP(clkdiv);
+	__BFP(control);
+	__BFP(slave_ctl);
+	__BFP(slave_stat);
+	__BFP(slave_addr);
+	__BFP(master_ctl);
+	__BFP(master_stat);
+	__BFP(master_addr);
+	__BFP(int_stat);
+	__BFP(int_mask);
+	__BFP(fifo_ctl);
+	__BFP(fifo_stat);
+	u32 __pad[20];
+	__BFP(xmt_data8);
+	__BFP(xmt_data16);
+	__BFP(rcv_data8);
+	__BFP(rcv_data16);
+};
+
+#undef __BFP
+
+#endif
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index 605ba8e9b2e4..3f7ef4d97791 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -22,7 +22,9 @@
 
 #include <asm-generic/bitops/sched.h>
 #include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/const_hweight.h>
 #include <asm-generic/bitops/lock.h>
+
 #include <asm-generic/bitops/ext2-non-atomic.h>
 #include <asm-generic/bitops/ext2-atomic.h>
 #include <asm-generic/bitops/minix.h>
@@ -115,29 +117,30 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
  * of bits set) of a N-bit word
  */
 
-static inline unsigned int hweight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
 {
 	unsigned int res;
 
-	__asm__ ("%0.l = ONES %0;"
+	__asm__ ("%0.l = ONES %1;"
 		"%0 = %0.l (Z);"
 		: "=d" (res) : "d" (w));
 	return res;
 }
 
-static inline unsigned int hweight64(__u64 w)
+static inline unsigned int __arch_hweight64(__u64 w)
 {
-	return hweight32((unsigned int)(w >> 32)) + hweight32((unsigned int)w);
+	return __arch_hweight32((unsigned int)(w >> 32)) +
+	       __arch_hweight32((unsigned int)w);
 }
 
-static inline unsigned int hweight16(unsigned int w)
+static inline unsigned int __arch_hweight16(unsigned int w)
 {
-	return hweight32(w & 0xffff);
+	return __arch_hweight32(w & 0xffff);
 }
 
-static inline unsigned int hweight8(unsigned int w)
+static inline unsigned int __arch_hweight8(unsigned int w)
 {
-	return hweight32(w & 0xff);
+	return __arch_hweight32(w & 0xff);
 }
 
 #endif				/* _BLACKFIN_BITOPS_H */
diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h
index 93f6c634fdf4..bd0641a267f1 100644
--- a/arch/blackfin/include/asm/cache.h
+++ b/arch/blackfin/include/asm/cache.h
@@ -15,7 +15,7 @@
 #define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
 #define SMP_CACHE_BYTES	L1_CACHE_BYTES
 
-#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
 
 #ifdef CONFIG_SMP
 #define __cacheline_aligned
diff --git a/arch/blackfin/include/asm/cachectl.h b/arch/blackfin/include/asm/cachectl.h
new file mode 100644
index 000000000000..03255df6c1ea
--- /dev/null
+++ b/arch/blackfin/include/asm/cachectl.h
@@ -0,0 +1,20 @@
+/*
+ * based on the mips/cachectl.h
+ *
+ * Copyright 2010 Analog Devices Inc.
+ * Copyright (C) 1994, 1995, 1996 by Ralf Baechle
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef	_ASM_CACHECTL
+#define	_ASM_CACHECTL
+
+/*
+ * Options for cacheflush system call
+ */
+#define	ICACHE	(1<<0)		/* flush instruction cache        */
+#define	DCACHE	(1<<1)		/* writeback and flush data cache */
+#define	BCACHE	(ICACHE|DCACHE)	/* flush both caches              */
+
+#endif	/* _ASM_CACHECTL */
diff --git a/arch/blackfin/include/asm/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h
index 8778e0f03730..59af63c0c2be 100644
--- a/arch/blackfin/include/asm/cdef_LPBlackfin.h
+++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h
@@ -172,16 +172,19 @@
 #define bfin_write_ICPLB_DATA14(val)         bfin_write32(ICPLB_DATA14,val)
 #define bfin_read_ICPLB_DATA15()             bfin_read32(ICPLB_DATA15)
 #define bfin_write_ICPLB_DATA15(val)         bfin_write32(ICPLB_DATA15,val)
-#define bfin_read_ITEST_COMMAND()            bfin_read32(ITEST_COMMAND)
 #define bfin_write_ITEST_COMMAND(val)        bfin_write32(ITEST_COMMAND,val)
 #if 0
 #define ITEST_INDEX            0xFFE01304   /* Instruction Test Index Register */
 #endif
-#define bfin_read_ITEST_DATA0()              bfin_read32(ITEST_DATA0)
 #define bfin_write_ITEST_DATA0(val)          bfin_write32(ITEST_DATA0,val)
-#define bfin_read_ITEST_DATA1()              bfin_read32(ITEST_DATA1)
 #define bfin_write_ITEST_DATA1(val)          bfin_write32(ITEST_DATA1,val)
 
+#if !ANOMALY_05000481
+#define bfin_read_ITEST_COMMAND()            bfin_read32(ITEST_COMMAND)
+#define bfin_read_ITEST_DATA0()              bfin_read32(ITEST_DATA0)
+#define bfin_read_ITEST_DATA1()              bfin_read32(ITEST_DATA1)
+#endif
+
 /* Event/Interrupt Registers*/
 
 #define bfin_read_EVT0()                     bfin_read32(EVT0)
@@ -216,12 +219,16 @@
 #define bfin_write_EVT14(val)                bfin_write32(EVT14,val)
 #define bfin_read_EVT15()                    bfin_read32(EVT15)
 #define bfin_write_EVT15(val)                bfin_write32(EVT15,val)
+#define bfin_read_EVT_OVERRIDE()             bfin_read32(EVT_OVERRIDE)
+#define bfin_write_EVT_OVERRIDE(val)         bfin_write32(EVT_OVERRIDE,val)
 #define bfin_read_IMASK()                    bfin_read32(IMASK)
 #define bfin_write_IMASK(val)                bfin_write32(IMASK,val)
 #define bfin_read_IPEND()                    bfin_read32(IPEND)
 #define bfin_write_IPEND(val)                bfin_write32(IPEND,val)
 #define bfin_read_ILAT()                     bfin_read32(ILAT)
 #define bfin_write_ILAT(val)                 bfin_write32(ILAT,val)
+#define bfin_read_IPRIO()                    bfin_read32(IPRIO)
+#define bfin_write_IPRIO(val)                bfin_write32(IPRIO,val)
 
 /*Core Timer Registers*/
 #define bfin_read_TCNTL()                    bfin_read32(TCNTL)
@@ -299,8 +306,4 @@
 #define bfin_read_PFCNTR1()                  bfin_read32(PFCNTR1)
 #define bfin_write_PFCNTR1(val)              bfin_write32(PFCNTR1,val)
 
-/*
-#define IPRIO                  0xFFE02110
-*/
-
 #endif				/* _CDEF_LPBLACKFIN_H */
diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
index f342ff0319df..e3f0f4c49819 100644
--- a/arch/blackfin/include/asm/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -50,6 +50,23 @@
 #define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w)
 #define bfin_write32(addr, val) _bfin_writeX(addr, val, 32,  )
 
+#define bfin_read(addr) \
+({ \
+    sizeof(*(addr)) == 1 ? bfin_read8(addr)  : \
+    sizeof(*(addr)) == 2 ? bfin_read16(addr) : \
+    sizeof(*(addr)) == 4 ? bfin_read32(addr) : \
+    ({ BUG(); 0; }); \
+})
+#define bfin_write(addr, val) \
+({ \
+	switch (sizeof(*(addr))) { \
+	case 1: bfin_write8(addr, val);  break; \
+	case 2: bfin_write16(addr, val); break; \
+	case 4: bfin_write32(addr, val); break; \
+	default: BUG(); \
+	} \
+})
+
 #endif /* __ASSEMBLY__ */
 
 /**************************************************
@@ -377,6 +394,7 @@
 #define EVT13              0xFFE02034	/* Event Vector 13 ESR Address */
 #define EVT14              0xFFE02038	/* Event Vector 14 ESR Address */
 #define EVT15              0xFFE0203C	/* Event Vector 15 ESR Address */
+#define EVT_OVERRIDE       0xFFE02100	/* Event Vector Override Register */
 #define IMASK              0xFFE02104	/* Interrupt Mask Register */
 #define IPEND              0xFFE02108	/* Interrupt Pending Register */
 #define ILAT               0xFFE0210C	/* Interrupt Latch Register */
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index 212cb80fd74b..bbf461076a0a 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -21,8 +21,6 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 #define dma_supported(d, m)         (1)
-#define dma_get_cache_alignment()   (32)
-#define dma_is_consistent(d, h)     (1)
 
 static inline int
 dma_set_mask(struct device *dev, u64 dma_mask)
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index 2c09b1d50ec9..eedf3ca65ba2 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -276,6 +276,7 @@ static inline void clear_dma_irqstat(unsigned int channel)
 }
 
 void *dma_memcpy(void *dest, const void *src, size_t count);
+void *dma_memcpy_nocache(void *dest, const void *src, size_t count);
 void *safe_dma_memcpy(void *dest, const void *src, size_t count);
 void blackfin_dma_early_init(void);
 void early_dma_memcpy(void *dest, const void *src, size_t count);
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index 117713adea7f..e6c6812a9abd 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -119,6 +119,7 @@ do {											\
 #define ELF_CORE_COPY_REGS(pr_reg, regs)	\
         memcpy((char *) &pr_reg, (char *)regs,  \
                sizeof(struct pt_regs));
+#define ELF_CORE_COPY_FPREGS(...) 0	/* Blackfin has no FPU */
 
 /* This yields a mask that user programs can use to figure out what
    instruction set this cpu supports.  */
diff --git a/arch/blackfin/include/asm/entry.h b/arch/blackfin/include/asm/entry.h
index a6886f6e4819..4104d5783e2c 100644
--- a/arch/blackfin/include/asm/entry.h
+++ b/arch/blackfin/include/asm/entry.h
@@ -15,14 +15,6 @@
 #define	LFLUSH_I_AND_D	0x00000808
 #define	LSIGTRAP	5
 
-/* process bits for task_struct.flags */
-#define	PF_TRACESYS_OFF	3
-#define	PF_TRACESYS_BIT	5
-#define	PF_PTRACED_OFF	3
-#define	PF_PTRACED_BIT	4
-#define	PF_DTRACE_OFF	1
-#define	PF_DTRACE_BIT	5
-
 /*
  * NOTE!  The single-stepping code assumes that all interrupt handlers
  * start by saving SYSCFG on the stack with their first instruction.
diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h
index 4cfe2d9ba7e8..8a029505d7b7 100644
--- a/arch/blackfin/include/asm/ftrace.h
+++ b/arch/blackfin/include/asm/ftrace.h
@@ -12,6 +12,22 @@
 
 #ifndef __ASSEMBLY__
 
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+extern void _mcount(void);
+#define MCOUNT_ADDR ((unsigned long)_mcount)
+
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+	/* No extra data needed for Blackfin */
+};
+
+#endif
+
 #ifdef CONFIG_FRAME_POINTER
 #include <linux/mm.h>
 
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 01b19d0cf509..1ef8417f5d27 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -7,63 +7,63 @@
 #ifndef __ARCH_BLACKFIN_GPIO_H__
 #define __ARCH_BLACKFIN_GPIO_H__
 
-#define gpio_bank(x) 	((x) >> 4)
-#define gpio_bit(x)  	(1<<((x) & 0xF))
-#define gpio_sub_n(x) 	((x) & 0xF)
+#define gpio_bank(x)	((x) >> 4)
+#define gpio_bit(x)	(1<<((x) & 0xF))
+#define gpio_sub_n(x)	((x) & 0xF)
 
-#define GPIO_BANKSIZE 	16
-#define GPIO_BANK_NUM 	DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE)
+#define GPIO_BANKSIZE	16
+#define GPIO_BANK_NUM	DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE)
 
 #include <mach/gpio.h>
 
-#define	GPIO_0	0
-#define	GPIO_1	1
-#define	GPIO_2	2
-#define	GPIO_3	3
-#define	GPIO_4	4
-#define	GPIO_5	5
-#define	GPIO_6	6
-#define	GPIO_7	7
-#define	GPIO_8	8
-#define	GPIO_9	9
-#define	GPIO_10	10
-#define	GPIO_11	11
-#define	GPIO_12	12
-#define	GPIO_13	13
-#define	GPIO_14	14
-#define	GPIO_15	15
-#define	GPIO_16	16
-#define	GPIO_17	17
-#define	GPIO_18	18
-#define	GPIO_19	19
-#define	GPIO_20	20
-#define	GPIO_21	21
-#define	GPIO_22	22
-#define	GPIO_23	23
-#define	GPIO_24	24
-#define	GPIO_25	25
-#define	GPIO_26	26
-#define	GPIO_27	27
-#define	GPIO_28	28
-#define	GPIO_29	29
-#define	GPIO_30	30
-#define	GPIO_31	31
-#define	GPIO_32	32
-#define	GPIO_33	33
-#define	GPIO_34	34
-#define	GPIO_35	35
-#define	GPIO_36	36
-#define	GPIO_37	37
-#define	GPIO_38	38
-#define	GPIO_39	39
-#define	GPIO_40	40
-#define	GPIO_41	41
-#define	GPIO_42	42
-#define	GPIO_43	43
-#define	GPIO_44	44
-#define	GPIO_45	45
-#define	GPIO_46	46
-#define	GPIO_47	47
+#define GPIO_0	0
+#define GPIO_1	1
+#define GPIO_2	2
+#define GPIO_3	3
+#define GPIO_4	4
+#define GPIO_5	5
+#define GPIO_6	6
+#define GPIO_7	7
+#define GPIO_8	8
+#define GPIO_9	9
+#define GPIO_10	10
+#define GPIO_11	11
+#define GPIO_12	12
+#define GPIO_13	13
+#define GPIO_14	14
+#define GPIO_15	15
+#define GPIO_16	16
+#define GPIO_17	17
+#define GPIO_18	18
+#define GPIO_19	19
+#define GPIO_20	20
+#define GPIO_21	21
+#define GPIO_22	22
+#define GPIO_23	23
+#define GPIO_24	24
+#define GPIO_25	25
+#define GPIO_26	26
+#define GPIO_27	27
+#define GPIO_28	28
+#define GPIO_29	29
+#define GPIO_30	30
+#define GPIO_31	31
+#define GPIO_32	32
+#define GPIO_33	33
+#define GPIO_34	34
+#define GPIO_35	35
+#define GPIO_36	36
+#define GPIO_37	37
+#define GPIO_38	38
+#define GPIO_39	39
+#define GPIO_40	40
+#define GPIO_41	41
+#define GPIO_42	42
+#define GPIO_43	43
+#define GPIO_44	44
+#define GPIO_45	45
+#define GPIO_46	46
+#define GPIO_47	47
 
 #define PERIPHERAL_USAGE 1
 #define GPIO_USAGE 0
@@ -279,6 +279,11 @@ static inline int gpio_direction_output(unsigned gpio, int value)
 	return bfin_gpio_direction_output(gpio, value);
 }
 
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+	return -EINVAL;
+}
+
 static inline int gpio_get_value(unsigned gpio)
 {
 	return bfin_gpio_get_value(gpio);
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index 29e55b9d88bc..234fbac17ec1 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -124,7 +124,13 @@ static inline unsigned int readl(const volatile void __iomem *addr)
 #define iowrite16(val, x)		writew(val, x)
 #define iowrite32(val, x)		writel(val, x)
 
-#define mmiowb() wmb()
+/**
+ * I/O write barrier
+ *
+ * Ensure ordering of I/O space writes. This will make sure that writes
+ * following the barrier will arrive after all previous writes.
+ */
+#define mmiowb() do { SSYNC(); wmb(); } while (0)
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index d3b40449ca0e..40f94a704c02 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -49,7 +49,7 @@
 #define prepare_arch_switch(next)		\
 do {						\
 	ipipe_schedule_notify(current, next);	\
-	local_irq_disable_hw();			\
+	hard_local_irq_disable();			\
 } while (0)
 
 #define task_hijacked(p)						\
@@ -57,7 +57,7 @@ do {						\
 		int __x__ = __ipipe_root_domain_p;			\
 		__clear_bit(IPIPE_SYNC_FLAG, &ipipe_root_cpudom_var(status)); \
 		if (__x__)						\
-			local_irq_enable_hw();				\
+			hard_local_irq_enable();				\
 		!__x__;							\
 	})
 
@@ -167,7 +167,7 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
 #define __ipipe_run_isr(ipd, irq)					\
 	do {								\
 		if (!__ipipe_pipeline_head_p(ipd))			\
-			local_irq_enable_hw();				\
+			hard_local_irq_enable();				\
 		if (ipd == ipipe_root_domain) {				\
 			if (unlikely(ipipe_virtual_irq_p(irq))) {	\
 				irq_enter();				\
@@ -183,7 +183,7 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
 			__ipipe_run_irqtail();				\
 			__set_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
 		}							\
-		local_irq_disable_hw();					\
+		hard_local_irq_disable();					\
 	} while (0)
 
 #define __ipipe_syscall_watched_p(p, sc)	\
diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h
index 813a1af3e865..41c4d70544ef 100644
--- a/arch/blackfin/include/asm/irqflags.h
+++ b/arch/blackfin/include/asm/irqflags.h
@@ -8,6 +8,8 @@
 #ifndef __ASM_BFIN_IRQFLAGS_H__
 #define __ASM_BFIN_IRQFLAGS_H__
 
+#include <mach/blackfin.h>
+
 #ifdef CONFIG_SMP
 # include <asm/pda.h>
 # include <asm/processor.h>
@@ -31,54 +33,108 @@ static inline unsigned long bfin_cli(void)
 	return flags;
 }
 
-#ifdef CONFIG_IPIPE
-
-#include <linux/compiler.h>
-#include <linux/ipipe_base.h>
-#include <linux/ipipe_trace.h>
-
 #ifdef CONFIG_DEBUG_HWERR
 # define bfin_no_irqs 0x3f
 #else
 # define bfin_no_irqs 0x1f
 #endif
 
-#define raw_local_irq_disable()				\
-	do {						\
-		ipipe_check_context(ipipe_root_domain);	\
-		__ipipe_stall_root();			\
-		barrier();				\
-	} while (0)
+/*****************************************************************************/
+/*
+ * Hard, untraced CPU interrupt flag manipulation and access.
+ */
+static inline void __hard_local_irq_disable(void)
+{
+	bfin_cli();
+}
+
+static inline void __hard_local_irq_enable(void)
+{
+	bfin_sti(bfin_irq_flags);
+}
+
+static inline unsigned long hard_local_save_flags(void)
+{
+	return bfin_read_IMASK();
+}
 
-#define raw_local_irq_enable()				\
-	do {						\
-		barrier();				\
-		ipipe_check_context(ipipe_root_domain);	\
-		__ipipe_unstall_root();			\
-	} while (0)
+static inline unsigned long __hard_local_irq_save(void)
+{
+	unsigned long flags;
+	flags = bfin_cli();
+#ifdef CONFIG_DEBUG_HWERR
+	bfin_sti(0x3f);
+#endif
+	return flags;
+}
+
+static inline int hard_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags & ~0x3f) == 0;
+}
+
+static inline int hard_irqs_disabled(void)
+{
+	unsigned long flags = hard_local_save_flags();
+	return hard_irqs_disabled_flags(flags);
+}
+
+static inline void __hard_local_irq_restore(unsigned long flags)
+{
+	if (!hard_irqs_disabled_flags(flags))
+		__hard_local_irq_enable();
+}
+
+/*****************************************************************************/
+/*
+ * Interrupt pipe handling.
+ */
+#ifdef CONFIG_IPIPE
+
+#include <linux/compiler.h>
+#include <linux/ipipe_base.h>
+#include <linux/ipipe_trace.h>
+
+/*
+ * Interrupt pipe interface to linux/irqflags.h.
+ */
+static inline void arch_local_irq_disable(void)
+{
+	ipipe_check_context(ipipe_root_domain);
+	__ipipe_stall_root();
+	barrier();
+}
 
-#define raw_local_save_flags_ptr(x)					\
-	do {								\
-		*(x) = __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags; \
-	} while (0)
+static inline void arch_local_irq_enable(void)
+{
+	barrier();
+	ipipe_check_context(ipipe_root_domain);
+	__ipipe_unstall_root();
+}
 
-#define raw_local_save_flags(x)		raw_local_save_flags_ptr(&(x))
+static inline unsigned long arch_local_save_flags(void)
+{
+	return __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags;
+}
 
-#define raw_irqs_disabled_flags(x)	((x) == bfin_no_irqs)
+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+	return flags == bfin_no_irqs;
+}
 
-#define raw_local_irq_save_ptr(x)					\
-	do {								\
-		*(x) = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags; \
-		barrier();						\
-	} while (0)
+static inline void arch_local_irq_save_ptr(unsigned long *_flags)
+{
+	x = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags;
+	barrier();
+}
 
-#define raw_local_irq_save(x)				\
-	do {						\
-		ipipe_check_context(ipipe_root_domain);	\
-		raw_local_irq_save_ptr(&(x));		\
-	} while (0)
+static inline unsigned long arch_local_irq_save(void)
+{
+	ipipe_check_context(ipipe_root_domain);
+	return __hard_local_irq_save();
+}
 
-static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real)
+static inline unsigned long arch_mangle_irq_bits(int virt, unsigned long real)
 {
 	/*
 	 * Merge virtual and real interrupt mask bits into a single
@@ -87,130 +143,79 @@ static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real)
 	return (real & ~(1 << 31)) | ((virt != 0) << 31);
 }
 
-static inline int raw_demangle_irq_bits(unsigned long *x)
+static inline int arch_demangle_irq_bits(unsigned long *x)
 {
 	int virt = (*x & (1 << 31)) != 0;
 	*x &= ~(1L << 31);
 	return virt;
 }
 
-static inline void local_irq_disable_hw_notrace(void)
+/*
+ * Interface to various arch routines that may be traced.
+ */
+#ifdef CONFIG_IPIPE_TRACE_IRQSOFF
+static inline void hard_local_irq_disable(void)
 {
-	bfin_cli();
+	if (!hard_irqs_disabled()) {
+		__hard_local_irq_disable();
+		ipipe_trace_begin(0x80000000);
+	}
 }
 
-static inline void local_irq_enable_hw_notrace(void)
+static inline void hard_local_irq_enable(void)
 {
-	bfin_sti(bfin_irq_flags);
+	if (hard_irqs_disabled()) {
+		ipipe_trace_end(0x80000000);
+		__hard_local_irq_enable();
+	}
 }
 
-#define local_save_flags_hw(flags)			\
-	do {						\
-		(flags) = bfin_read_IMASK();		\
-	} while (0)
-
-#define irqs_disabled_flags_hw(flags) (((flags) & ~0x3f) == 0)
-
-#define irqs_disabled_hw()			\
-	({					\
-	unsigned long flags;			\
-	local_save_flags_hw(flags);		\
-	irqs_disabled_flags_hw(flags);		\
-	})
-
-static inline void local_irq_save_ptr_hw(unsigned long *flags)
+static inline unsigned long hard_local_irq_save(void)
 {
-	*flags = bfin_cli();
-#ifdef CONFIG_DEBUG_HWERR
-	bfin_sti(0x3f);
-#endif
+	unsigned long flags = hard_local_save_flags();
+	if (!hard_irqs_disabled_flags(flags)) {
+		__hard_local_irq_disable();
+		ipipe_trace_begin(0x80000001);
+	}
+	return flags;
 }
 
-#define local_irq_save_hw_notrace(flags)		\
-	do {						\
-		local_irq_save_ptr_hw(&(flags));	\
-	} while (0)
-
-static inline void local_irq_restore_hw_notrace(unsigned long flags)
+static inline void hard_local_irq_restore(unsigned long flags)
 {
-	if (!irqs_disabled_flags_hw(flags))
-		local_irq_enable_hw_notrace();
+	if (!hard_irqs_disabled_flags(flags)) {
+		ipipe_trace_end(0x80000001);
+		__hard_local_irq_enable();
+	}
 }
 
-#ifdef CONFIG_IPIPE_TRACE_IRQSOFF
-# define local_irq_disable_hw()				\
-	do {						\
-		if (!irqs_disabled_hw()) {		\
-			local_irq_disable_hw_notrace();	\
-			ipipe_trace_begin(0x80000000);	\
-		}					\
-	} while (0)
-# define local_irq_enable_hw()				\
-	do {						\
-		if (irqs_disabled_hw()) {		\
-			ipipe_trace_end(0x80000000);	\
-			local_irq_enable_hw_notrace();	\
-		}					\
-	} while (0)
-# define local_irq_save_hw(flags)			\
-	do {						\
-		local_save_flags_hw(flags);		\
-		if (!irqs_disabled_flags_hw(flags)) {	\
-			local_irq_disable_hw_notrace();	\
-			ipipe_trace_begin(0x80000001);	\
-		}					\
-	} while (0)
-# define local_irq_restore_hw(flags)			\
-	do {						\
-		if (!irqs_disabled_flags_hw(flags)) {	\
-			ipipe_trace_end(0x80000001);	\
-			local_irq_enable_hw_notrace();	\
-		}					\
-	} while (0)
 #else /* !CONFIG_IPIPE_TRACE_IRQSOFF */
-# define local_irq_disable_hw()		local_irq_disable_hw_notrace()
-# define local_irq_enable_hw()		local_irq_enable_hw_notrace()
-# define local_irq_save_hw(flags)	local_irq_save_hw_notrace(flags)
-# define local_irq_restore_hw(flags)	local_irq_restore_hw_notrace(flags)
+# define hard_local_irq_disable()	__hard_local_irq_disable()
+# define hard_local_irq_enable()	__hard_local_irq_enable()
+# define hard_local_irq_save()		__hard_local_irq_save()
+# define hard_local_irq_restore(flags)	__hard_local_irq_restore(flags)
 #endif /* !CONFIG_IPIPE_TRACE_IRQSOFF */
 
 #else /* CONFIG_IPIPE */
 
-static inline void raw_local_irq_disable(void)
-{
-	bfin_cli();
-}
-static inline void raw_local_irq_enable(void)
-{
-	bfin_sti(bfin_irq_flags);
-}
-
-#define raw_local_save_flags(flags) do { (flags) = bfin_read_IMASK(); } while (0)
-
-#define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0)
+/*
+ * Direct interface to linux/irqflags.h.
+ */
+#define arch_local_save_flags()		hard_local_save_flags()
+#define arch_local_irq_save(flags)	__hard_local_irq_save()
+#define arch_local_irq_restore(flags)	__hard_local_irq_restore(flags)
+#define arch_local_irq_enable()		__hard_local_irq_enable()
+#define arch_local_irq_disable()	__hard_local_irq_disable()
+#define arch_irqs_disabled_flags(flags)	hard_irqs_disabled_flags(flags)
+#define arch_irqs_disabled()		hard_irqs_disabled()
 
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long flags = bfin_cli();
-#ifdef CONFIG_DEBUG_HWERR
-	bfin_sti(0x3f);
-#endif
-	return flags;
-}
-#define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0)
+/*
+ * Interface to various arch routines that may be traced.
+ */
+#define hard_local_irq_save()		__hard_local_irq_save()
+#define hard_local_irq_restore(flags)	__hard_local_irq_restore(flags)
+#define hard_local_irq_enable()		__hard_local_irq_enable()
+#define hard_local_irq_disable()	__hard_local_irq_disable()
 
-#define local_irq_save_hw(flags)	raw_local_irq_save(flags)
-#define local_irq_restore_hw(flags)	raw_local_irq_restore(flags)
-#define local_irq_enable_hw()		raw_local_irq_enable()
-#define local_irq_disable_hw()		raw_local_irq_disable()
-#define irqs_disabled_hw()		irqs_disabled()
 
 #endif /* !CONFIG_IPIPE */
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-	if (!raw_irqs_disabled_flags(flags))
-		raw_local_irq_enable();
-}
-
 #endif
diff --git a/arch/blackfin/include/asm/local64.h b/arch/blackfin/include/asm/local64.h
new file mode 100644
index 000000000000..36c93b5cc239
--- /dev/null
+++ b/arch/blackfin/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h
index 7c8fe834ff22..237579935e29 100644
--- a/arch/blackfin/include/asm/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -10,7 +10,6 @@
 #if defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \
     defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
     defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
-    defined(CONFIG_MEM_GENERIC_BOARD) || \
     defined(CONFIG_MEM_MT48LC32M8A2_75) || \
     defined(CONFIG_MEM_MT48LC8M32B2B5_7) || \
     defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \
@@ -178,7 +177,6 @@
 
 #if defined(CONFIG_MEM_MT48LC32M8A2_75) || \
     defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
-    defined(CONFIG_MEM_GENERIC_BOARD) || \
     defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \
     defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \
     defined(CONFIG_MEM_MT48LC32M8A2_75)
@@ -248,22 +246,6 @@
 #define DDR_tWR		DDR_TWR(MIN_DDR_SCLK(15))
 #endif
 
-#if defined(CONFIG_MEM_GENERIC_BOARD)
-#define DDR_SIZE	DEVSZ_512
-#define DDR_WIDTH	DEVWD_16
-#define DDR_MAX_tCK	13
-
-#define DDR_tRCD	DDR_TRCD(3)
-#define DDR_tWTR	DDR_TWTR(2)
-#define DDR_tWR		DDR_TWR(2)
-#define DDR_tMRD	DDR_TMRD(2)
-#define DDR_tRP		DDR_TRP(3)
-#define DDR_tRAS	DDR_TRAS(7)
-#define DDR_tRC		DDR_TRC(10)
-#define DDR_tRFC	DDR_TRFC(12)
-#define DDR_tREFI	DDR_TREFI(1288)
-#endif
-
 #if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK))
 # error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)."
 #elif(CONFIG_SCLK_HZ <= 133333333)
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index e1a9b4624f91..3828c70e7a2e 100644
--- a/arch/blackfin/include/asm/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -97,8 +97,8 @@ static inline void __switch_mm(struct mm_struct *prev_mm, struct mm_struct *next
 }
 
 #ifdef CONFIG_IPIPE
-#define lock_mm_switch(flags)	local_irq_save_hw_cond(flags)
-#define unlock_mm_switch(flags)	local_irq_restore_hw_cond(flags)
+#define lock_mm_switch(flags)	flags = hard_local_irq_save_cond()
+#define unlock_mm_switch(flags)	hard_local_irq_restore_cond(flags)
 #else
 #define lock_mm_switch(flags)	do { (void)(flags); } while (0)
 #define unlock_mm_switch(flags)	do { (void)(flags); } while (0)
@@ -205,9 +205,9 @@ static inline void destroy_context(struct mm_struct *mm)
 }
 
 #define ipipe_mm_switch_protect(flags)		\
-	local_irq_save_hw_cond(flags)
+	flags = hard_local_irq_save_cond()
 
 #define ipipe_mm_switch_unprotect(flags)	\
-	local_irq_restore_hw_cond(flags)
+	hard_local_irq_restore_cond(flags)
 
 #endif
diff --git a/arch/blackfin/include/asm/nand.h b/arch/blackfin/include/asm/nand.h
index 3a1e79dfc8d9..256c50d8d465 100644
--- a/arch/blackfin/include/asm/nand.h
+++ b/arch/blackfin/include/asm/nand.h
@@ -15,8 +15,6 @@
  * partitions	 = mtd partition list
  */
 
-#define NFC_PG_SIZE_256		0
-#define NFC_PG_SIZE_512		1
 #define NFC_PG_SIZE_OFFSET	9
 
 #define NFC_NWIDTH_8		0
@@ -30,7 +28,6 @@
 
 struct bf5xx_nand_platform {
 	/* NAND chip information */
-	unsigned short		page_size;
 	unsigned short		data_width;
 
 	/* RD/WR strobe delay timing information, all times in SCLK cycles */
diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h
index edd8ef3a3788..9b1e2c37b324 100644
--- a/arch/blackfin/include/asm/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -1,9 +1,9 @@
 /*
  * Common header file for Blackfin family of processors
  *
- * Copyright 2007-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _PORTMUX_H_
@@ -1042,8 +1042,8 @@ void peripheral_free_list(const unsigned short per[]);
 #define P_NOR_CLK P_UNDEF
 #endif
 
-#ifndef  P_TMRCLK
-#define  P_TMRCLK P_UNDEF
+#ifndef P_TMRCLK
+#define P_TMRCLK P_UNDEF
 #endif
 
 #ifndef P_AMC_ARDY_NOR_WAIT
diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h
index aaa1c6c2bc19..832d7c009a2c 100644
--- a/arch/blackfin/include/asm/ptrace.h
+++ b/arch/blackfin/include/asm/ptrace.h
@@ -113,6 +113,9 @@ extern void user_disable_single_step(struct task_struct *child);
 /* common code demands this function */
 #define ptrace_disable(child) user_disable_single_step(child)
 
+extern int is_user_addr_valid(struct task_struct *child,
+			      unsigned long start, unsigned long len);
+
 /*
  * Get the address of the live pt_regs for the specified task.
  * These are saved onto the top kernel stack when the process
diff --git a/arch/blackfin/include/asm/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h
index 64d41d34ab0b..d177a1588958 100644
--- a/arch/blackfin/include/asm/scatterlist.h
+++ b/arch/blackfin/include/asm/scatterlist.h
@@ -3,6 +3,4 @@
 
 #include <asm-generic/scatterlist.h>
 
-#define ISA_DMA_THRESHOLD	(0xffffffff)
-
 #endif				/* !(_BLACKFIN_SCATTERLIST_H) */
diff --git a/arch/blackfin/include/asm/serial.h b/arch/blackfin/include/asm/serial.h
index 94a4a12e3bf2..a0cb0caff152 100644
--- a/arch/blackfin/include/asm/serial.h
+++ b/arch/blackfin/include/asm/serial.h
@@ -1,2 +1 @@
 #include <asm-generic/serial.h>
-#define SERIAL_EXTRA_IRQ_FLAGS IRQF_TRIGGER_HIGH
diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h
index dde19b1d25f5..19e2c7c3e63a 100644
--- a/arch/blackfin/include/asm/system.h
+++ b/arch/blackfin/include/asm/system.h
@@ -117,7 +117,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
 	unsigned long tmp = 0;
 	unsigned long flags;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
 	switch (size) {
 	case 1:
@@ -139,7 +139,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
 			 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
 		break;
 	}
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 	return tmp;
 }
 
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index 22886cbdae7a..928ae975b87e 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -389,8 +389,12 @@
 #define __NR_rt_tgsigqueueinfo	368
 #define __NR_perf_event_open	369
 #define __NR_recvmmsg		370
+#define __NR_fanotify_init	371
+#define __NR_fanotify_mark	372
+#define __NR_prlimit64		373
+#define __NR_cacheflush		374
 
-#define __NR_syscall		371
+#define __NR_syscall		375
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 30d0d1f01dc7..ca5ccc777772 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -16,6 +16,7 @@ else
     obj-y += time.o
 endif
 
+obj-$(CONFIG_DYNAMIC_FTRACE)         += ftrace.o
 obj-$(CONFIG_FUNCTION_TRACER)        += ftrace-entry.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o
 CFLAGS_REMOVE_ftrace.o = -pg
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 26403d1c9e65..1e485dfdc9f2 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -450,7 +450,6 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size)
 {
 	unsigned long dst = (unsigned long)pdst;
 	unsigned long src = (unsigned long)psrc;
-	size_t bulk, rest;
 
 	if (bfin_addr_dcacheable(src))
 		blackfin_dcache_flush_range(src, src + size);
@@ -458,6 +457,22 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size)
 	if (bfin_addr_dcacheable(dst))
 		blackfin_dcache_invalidate_range(dst, dst + size);
 
+	return dma_memcpy_nocache(pdst, psrc, size);
+}
+EXPORT_SYMBOL(dma_memcpy);
+
+/**
+ *	dma_memcpy_nocache - DMA memcpy under mutex lock
+ *	- No cache flush/invalidate
+ *
+ * Do not check arguments before starting the DMA memcpy.  Break the transfer
+ * up into two pieces.  The first transfer is in multiples of 64k and the
+ * second transfer is the piece smaller than 64k.
+ */
+void *dma_memcpy_nocache(void *pdst, const void *psrc, size_t size)
+{
+	size_t bulk, rest;
+
 	bulk = size & ~0xffff;
 	rest = size - bulk;
 	if (bulk)
@@ -465,7 +480,7 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size)
 	_dma_memcpy(pdst + bulk, psrc + bulk, rest);
 	return pdst;
 }
-EXPORT_SYMBOL(dma_memcpy);
+EXPORT_SYMBOL(dma_memcpy_nocache);
 
 /**
  *	safe_dma_memcpy - DMA memcpy w/argument checking
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 42833ee2b308..170cf90735ba 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -1,7 +1,7 @@
 /*
  * GPIO Abstraction Layer
  *
- * Copyright 2006-2009 Analog Devices Inc.
+ * Copyright 2006-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later
  */
@@ -108,11 +108,7 @@ static unsigned short * const port_fer[] = {
 };
 #endif
 
-static unsigned short reserved_gpio_map[GPIO_BANK_NUM];
-static unsigned short reserved_peri_map[gpio_bank(MAX_RESOURCES)];
-static unsigned short reserved_gpio_irq_map[GPIO_BANK_NUM];
-
-#define RESOURCE_LABEL_SIZE 	16
+#define RESOURCE_LABEL_SIZE	16
 
 static struct str_ident {
 	char name[RESOURCE_LABEL_SIZE];
@@ -122,19 +118,6 @@ static struct str_ident {
 static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
 #endif
 
-inline int check_gpio(unsigned gpio)
-{
-#if defined(CONFIG_BF54x)
-	if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
-	    || gpio == GPIO_PH14 || gpio == GPIO_PH15
-	    || gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
-		return -EINVAL;
-#endif
-	if (gpio >= MAX_BLACKFIN_GPIOS)
-		return -EINVAL;
-	return 0;
-}
-
 static void gpio_error(unsigned gpio)
 {
 	printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio);
@@ -167,6 +150,29 @@ static int cmp_label(unsigned short ident, const char *label)
 		return -EINVAL;
 }
 
+#define map_entry(m, i)      reserved_##m##_map[gpio_bank(i)]
+#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
+#define reserve(m, i)        (map_entry(m, i) |= gpio_bit(i))
+#define unreserve(m, i)      (map_entry(m, i) &= ~gpio_bit(i))
+#define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c]
+
+DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
+DECLARE_RESERVED_MAP(peri, DIV_ROUND_UP(MAX_RESOURCES, GPIO_BANKSIZE));
+DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM);
+
+inline int check_gpio(unsigned gpio)
+{
+#if defined(CONFIG_BF54x)
+	if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
+	    || gpio == GPIO_PH14 || gpio == GPIO_PH15
+	    || gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
+		return -EINVAL;
+#endif
+	if (gpio >= MAX_BLACKFIN_GPIOS)
+		return -EINVAL;
+	return 0;
+}
+
 static void port_setup(unsigned gpio, unsigned short usage)
 {
 #if defined(BF538_FAMILY)
@@ -209,82 +215,91 @@ static void port_setup(unsigned gpio, unsigned short usage)
 }
 
 #ifdef BF537_FAMILY
-static struct {
-	unsigned short res;
-	unsigned short offset;
-} port_mux_lut[] = {
-	{.res = P_PPI0_D13, .offset = 11},
-	{.res = P_PPI0_D14, .offset = 11},
-	{.res = P_PPI0_D15, .offset = 11},
-	{.res = P_SPORT1_TFS, .offset = 11},
-	{.res = P_SPORT1_TSCLK, .offset = 11},
-	{.res = P_SPORT1_DTPRI, .offset = 11},
-	{.res = P_PPI0_D10, .offset = 10},
-	{.res = P_PPI0_D11, .offset = 10},
-	{.res = P_PPI0_D12, .offset = 10},
-	{.res = P_SPORT1_RSCLK, .offset = 10},
-	{.res = P_SPORT1_RFS, .offset = 10},
-	{.res = P_SPORT1_DRPRI, .offset = 10},
-	{.res = P_PPI0_D8, .offset = 9},
-	{.res = P_PPI0_D9, .offset = 9},
-	{.res = P_SPORT1_DRSEC, .offset = 9},
-	{.res = P_SPORT1_DTSEC, .offset = 9},
-	{.res = P_TMR2, .offset = 8},
-	{.res = P_PPI0_FS3, .offset = 8},
-	{.res = P_TMR3, .offset = 7},
-	{.res = P_SPI0_SSEL4, .offset = 7},
-	{.res = P_TMR4, .offset = 6},
-	{.res = P_SPI0_SSEL5, .offset = 6},
-	{.res = P_TMR5, .offset = 5},
-	{.res = P_SPI0_SSEL6, .offset = 5},
-	{.res = P_UART1_RX, .offset = 4},
-	{.res = P_UART1_TX, .offset = 4},
-	{.res = P_TMR6, .offset = 4},
-	{.res = P_TMR7, .offset = 4},
-	{.res = P_UART0_RX, .offset = 3},
-	{.res = P_UART0_TX, .offset = 3},
-	{.res = P_DMAR0, .offset = 3},
-	{.res = P_DMAR1, .offset = 3},
-	{.res = P_SPORT0_DTSEC, .offset = 1},
-	{.res = P_SPORT0_DRSEC, .offset = 1},
-	{.res = P_CAN0_RX, .offset = 1},
-	{.res = P_CAN0_TX, .offset = 1},
-	{.res = P_SPI0_SSEL7, .offset = 1},
-	{.res = P_SPORT0_TFS, .offset = 0},
-	{.res = P_SPORT0_DTPRI, .offset = 0},
-	{.res = P_SPI0_SSEL2, .offset = 0},
-	{.res = P_SPI0_SSEL3, .offset = 0},
+static const s8 port_mux[] = {
+	[GPIO_PF0] = 3,
+	[GPIO_PF1] = 3,
+	[GPIO_PF2] = 4,
+	[GPIO_PF3] = 4,
+	[GPIO_PF4] = 5,
+	[GPIO_PF5] = 6,
+	[GPIO_PF6] = 7,
+	[GPIO_PF7] = 8,
+	[GPIO_PF8 ... GPIO_PF15] = -1,
+	[GPIO_PG0 ... GPIO_PG7] = -1,
+	[GPIO_PG8] = 9,
+	[GPIO_PG9] = 9,
+	[GPIO_PG10] = 10,
+	[GPIO_PG11] = 10,
+	[GPIO_PG12] = 10,
+	[GPIO_PG13] = 11,
+	[GPIO_PG14] = 11,
+	[GPIO_PG15] = 11,
+	[GPIO_PH0 ... GPIO_PH15] = -1,
+	[PORT_PJ0 ... PORT_PJ3] = -1,
+	[PORT_PJ4] = 1,
+	[PORT_PJ5] = 1,
+	[PORT_PJ6 ... PORT_PJ9] = -1,
+	[PORT_PJ10] = 0,
+	[PORT_PJ11] = 0,
 };
 
-static void portmux_setup(unsigned short per)
+static int portmux_group_check(unsigned short per)
 {
-	u16 y, offset, muxreg;
+	u16 ident = P_IDENT(per);
 	u16 function = P_FUNCT2MUX(per);
+	s8 offset = port_mux[ident];
+	u16 m, pmux, pfunc;
 
-	for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
-		if (port_mux_lut[y].res == per) {
-
-			/* SET PORTMUX REG */
-
-			offset = port_mux_lut[y].offset;
-			muxreg = bfin_read_PORT_MUX();
+	if (offset < 0)
+		return 0;
 
-			if (offset != 1)
-				muxreg &= ~(1 << offset);
-			else
-				muxreg &= ~(3 << 1);
+	pmux = bfin_read_PORT_MUX();
+	for (m = 0; m < ARRAY_SIZE(port_mux); ++m) {
+		if (m == ident)
+			continue;
+		if (port_mux[m] != offset)
+			continue;
+		if (!is_reserved(peri, m, 1))
+			continue;
 
-			muxreg |= (function << offset);
-			bfin_write_PORT_MUX(muxreg);
+		if (offset == 1)
+			pfunc = (pmux >> offset) & 3;
+		else
+			pfunc = (pmux >> offset) & 1;
+		if (pfunc != function) {
+			pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n",
+				ident, function, m, pfunc);
+			return -EINVAL;
 		}
 	}
+
+	return 0;
+}
+
+static void portmux_setup(unsigned short per)
+{
+	u16 ident = P_IDENT(per);
+	u16 function = P_FUNCT2MUX(per);
+	s8 offset = port_mux[ident];
+	u16 pmux;
+
+	if (offset == -1)
+		return;
+
+	pmux = bfin_read_PORT_MUX();
+	if (offset != 1)
+		pmux &= ~(1 << offset);
+	else
+		pmux &= ~(3 << 1);
+	pmux |= (function << offset);
+	bfin_write_PORT_MUX(pmux);
 }
 #elif defined(CONFIG_BF54x)
 inline void portmux_setup(unsigned short per)
 {
-	u32 pmux;
 	u16 ident = P_IDENT(per);
 	u16 function = P_FUNCT2MUX(per);
+	u32 pmux;
 
 	pmux = gpio_array[gpio_bank(ident)]->port_mux;
 
@@ -296,20 +311,54 @@ inline void portmux_setup(unsigned short per)
 
 inline u16 get_portmux(unsigned short per)
 {
-	u32 pmux;
 	u16 ident = P_IDENT(per);
-
-	pmux = gpio_array[gpio_bank(ident)]->port_mux;
-
+	u32 pmux = gpio_array[gpio_bank(ident)]->port_mux;
 	return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
 }
+static int portmux_group_check(unsigned short per)
+{
+	return 0;
+}
 #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+static int portmux_group_check(unsigned short per)
+{
+	u16 ident = P_IDENT(per);
+	u16 function = P_FUNCT2MUX(per);
+	u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
+	u16 pin, gpiopin, pfunc;
+
+	for (pin = 0; pin < GPIO_BANKSIZE; ++pin) {
+		if (offset != pmux_offset[gpio_bank(ident)][pin])
+			continue;
+
+		gpiopin = gpio_bank(ident) * GPIO_BANKSIZE + pin;
+		if (gpiopin == ident)
+			continue;
+		if (!is_reserved(peri, gpiopin, 1))
+			continue;
+
+		pfunc = *port_mux[gpio_bank(ident)];
+		pfunc = (pfunc >> offset) & 3;
+		if (pfunc != function) {
+			pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n",
+				ident, function, gpiopin, pfunc);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
 inline void portmux_setup(unsigned short per)
 {
-	u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
+	u16 ident = P_IDENT(per);
+	u16 function = P_FUNCT2MUX(per);
 	u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
+	u16 pmux;
 
 	pmux = *port_mux[gpio_bank(ident)];
+	if  (((pmux >> offset) & 3) == function)
+		return;
 	pmux &= ~(3 << offset);
 	pmux |= (function & 3) << offset;
 	*port_mux[gpio_bank(ident)] = pmux;
@@ -317,6 +366,10 @@ inline void portmux_setup(unsigned short per)
 }
 #else
 # define portmux_setup(...)  do { } while (0)
+static int portmux_group_check(unsigned short per)
+{
+	return 0;
+}
 #endif
 
 #ifndef CONFIG_BF54x
@@ -343,13 +396,13 @@ inline void portmux_setup(unsigned short per)
 void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
 { \
 	unsigned long flags; \
-	local_irq_save_hw(flags); \
+	flags = hard_local_irq_save(); \
 	if (arg) \
 		gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
 	else \
 		gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
 	AWA_DUMMY_READ(name); \
-	local_irq_restore_hw(flags); \
+	hard_local_irq_restore(flags); \
 } \
 EXPORT_SYMBOL(set_gpio_ ## name);
 
@@ -365,14 +418,14 @@ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
 { \
 	unsigned long flags; \
 	if (ANOMALY_05000311 || ANOMALY_05000323) \
-		local_irq_save_hw(flags); \
+		flags = hard_local_irq_save(); \
 	if (arg) \
 		gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
 	else \
 		gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
 	if (ANOMALY_05000311 || ANOMALY_05000323) { \
 		AWA_DUMMY_READ(name); \
-		local_irq_restore_hw(flags); \
+		hard_local_irq_restore(flags); \
 	} \
 } \
 EXPORT_SYMBOL(set_gpio_ ## name);
@@ -385,11 +438,11 @@ void set_gpio_toggle(unsigned gpio)
 {
 	unsigned long flags;
 	if (ANOMALY_05000311 || ANOMALY_05000323)
-		local_irq_save_hw(flags);
+		flags = hard_local_irq_save();
 	gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
 	if (ANOMALY_05000311 || ANOMALY_05000323) {
 		AWA_DUMMY_READ(toggle);
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 	}
 }
 EXPORT_SYMBOL(set_gpio_toggle);
@@ -402,11 +455,11 @@ void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
 { \
 	unsigned long flags; \
 	if (ANOMALY_05000311 || ANOMALY_05000323) \
-		local_irq_save_hw(flags); \
+		flags = hard_local_irq_save(); \
 	gpio_array[gpio_bank(gpio)]->name = arg; \
 	if (ANOMALY_05000311 || ANOMALY_05000323) { \
 		AWA_DUMMY_READ(name); \
-		local_irq_restore_hw(flags); \
+		hard_local_irq_restore(flags); \
 	} \
 } \
 EXPORT_SYMBOL(set_gpiop_ ## name);
@@ -427,11 +480,11 @@ unsigned short get_gpio_ ## name(unsigned gpio) \
 	unsigned long flags; \
 	unsigned short ret; \
 	if (ANOMALY_05000311 || ANOMALY_05000323) \
-		local_irq_save_hw(flags); \
+		flags = hard_local_irq_save(); \
 	ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
 	if (ANOMALY_05000311 || ANOMALY_05000323) { \
 		AWA_DUMMY_READ(name); \
-		local_irq_restore_hw(flags); \
+		hard_local_irq_restore(flags); \
 	} \
 	return ret; \
 } \
@@ -454,11 +507,11 @@ unsigned short get_gpiop_ ## name(unsigned gpio) \
 	unsigned long flags; \
 	unsigned short ret; \
 	if (ANOMALY_05000311 || ANOMALY_05000323) \
-		local_irq_save_hw(flags); \
+		flags = hard_local_irq_save(); \
 	ret = (gpio_array[gpio_bank(gpio)]->name); \
 	if (ANOMALY_05000311 || ANOMALY_05000323) { \
 		AWA_DUMMY_READ(name); \
-		local_irq_restore_hw(flags); \
+		hard_local_irq_restore(flags); \
 	} \
 	return ret; \
 } \
@@ -475,7 +528,7 @@ GET_GPIO_P(maskb)
 
 
 #ifdef CONFIG_PM
-static unsigned short wakeup_map[GPIO_BANK_NUM];
+DECLARE_RESERVED_MAP(wakeup, GPIO_BANK_NUM);
 
 static const unsigned int sic_iwr_irqs[] = {
 #if defined(BF533_FAMILY)
@@ -519,14 +572,14 @@ int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	if (ctrl)
-		wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+		reserve(wakeup, gpio);
 	else
-		wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+		unreserve(wakeup, gpio);
 
 	set_gpio_maskb(gpio, ctrl);
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 
 	return 0;
 }
@@ -536,7 +589,7 @@ int bfin_pm_standby_ctrl(unsigned ctrl)
 	u16 bank, mask, i;
 
 	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-		mask = wakeup_map[gpio_bank(i)];
+		mask = map_entry(wakeup, i);
 		bank = gpio_bank(i);
 
 		if (mask)
@@ -653,7 +706,7 @@ EXPORT_SYMBOL(get_gpio_dir);
 
 /***********************************************************
 *
-* FUNCTIONS: 	Blackfin Peripheral Resource Allocation
+* FUNCTIONS:	Blackfin Peripheral Resource Allocation
 *		and PortMux Setup
 *
 * INPUTS/OUTPUTS:
@@ -684,23 +737,22 @@ int peripheral_request(unsigned short per, const char *label)
 
 	BUG_ON(ident >= MAX_RESOURCES);
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
 	/* If a pin can be muxed as either GPIO or peripheral, make
 	 * sure it is not already a GPIO pin when we request it.
 	 */
-	if (unlikely(!check_gpio(ident) &&
-	    reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
+	if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		printk(KERN_ERR
 		       "%s: Peripheral %d is already reserved as GPIO by %s !\n",
 		       __func__, ident, get_label(ident));
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		return -EBUSY;
 	}
 
-	if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
+	if (unlikely(is_reserved(peri, ident, 1))) {
 
 		/*
 		 * Pin functions like AMC address strobes my
@@ -725,18 +777,22 @@ int peripheral_request(unsigned short per, const char *label)
 			printk(KERN_ERR
 			       "%s: Peripheral %d function %d is already reserved by %s !\n",
 			       __func__, ident, P_FUNCT2MUX(per), get_label(ident));
-			local_irq_restore_hw(flags);
+			hard_local_irq_restore(flags);
 			return -EBUSY;
 		}
 	}
 
+	if (unlikely(portmux_group_check(per))) {
+		hard_local_irq_restore(flags);
+		return -EBUSY;
+	}
  anyway:
-	reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
+	reserve(peri, ident);
 
 	portmux_setup(per);
 	port_setup(ident, PERIPHERAL_USAGE);
 
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 	set_label(ident, label);
 
 	return 0;
@@ -775,21 +831,21 @@ void peripheral_free(unsigned short per)
 	if (!(per & P_DEFINED))
 		return;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
-	if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
-		local_irq_restore_hw(flags);
+	if (unlikely(!is_reserved(peri, ident, 0))) {
+		hard_local_irq_restore(flags);
 		return;
 	}
 
 	if (!(per & P_MAYSHARE))
 		port_setup(ident, GPIO_USAGE);
 
-	reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
+	unreserve(peri, ident);
 
 	set_label(ident, "free");
 
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 EXPORT_SYMBOL(peripheral_free);
 
@@ -823,7 +879,7 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
 	/*
 	 * Allow that the identical GPIO can
@@ -832,28 +888,28 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 	 */
 
 	if (cmp_label(gpio, label) == 0) {
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		return 0;
 	}
 
-	if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(is_reserved(gpio, gpio, 1))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
 		       gpio, get_label(gpio));
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		return -EBUSY;
 	}
-	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(is_reserved(peri, gpio, 1))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		printk(KERN_ERR
 		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
 		       gpio, get_label(gpio));
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		return -EBUSY;
 	}
-	if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(is_reserved(gpio_irq, gpio, 1))) {
 		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
 		       " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
 	}
@@ -863,10 +919,10 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 	}
 #endif
 
-	reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+	reserve(gpio, gpio);
 	set_label(gpio, label);
 
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 
 	port_setup(gpio, GPIO_USAGE);
 
@@ -883,32 +939,32 @@ void bfin_gpio_free(unsigned gpio)
 
 	might_sleep();
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
-	if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+	if (unlikely(!is_reserved(gpio, gpio, 0))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		gpio_error(gpio);
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		return;
 	}
 
-	reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+	unreserve(gpio, gpio);
 
 	set_label(gpio, "free");
 
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 EXPORT_SYMBOL(bfin_gpio_free);
 
 #ifdef BFIN_SPECIAL_GPIO_BANKS
-static unsigned short reserved_special_gpio_map[gpio_bank(MAX_RESOURCES)];
+DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
 
 int bfin_special_gpio_request(unsigned gpio, const char *label)
 {
 	unsigned long flags;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
 	/*
 	 * Allow that the identical GPIO can
@@ -917,19 +973,19 @@ int bfin_special_gpio_request(unsigned gpio, const char *label)
 	 */
 
 	if (cmp_label(gpio, label) == 0) {
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		return 0;
 	}
 
-	if (unlikely(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		local_irq_restore_hw(flags);
+	if (unlikely(is_reserved(special_gpio, gpio, 1))) {
+		hard_local_irq_restore(flags);
 		printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
 		       gpio, get_label(gpio));
 
 		return -EBUSY;
 	}
-	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
-		local_irq_restore_hw(flags);
+	if (unlikely(is_reserved(peri, gpio, 1))) {
+		hard_local_irq_restore(flags);
 		printk(KERN_ERR
 		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
 		       gpio, get_label(gpio));
@@ -937,11 +993,11 @@ int bfin_special_gpio_request(unsigned gpio, const char *label)
 		return -EBUSY;
 	}
 
-	reserved_special_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
-	reserved_peri_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+	reserve(special_gpio, gpio);
+	reserve(peri, gpio);
 
 	set_label(gpio, label);
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 	port_setup(gpio, GPIO_USAGE);
 
 	return 0;
@@ -954,18 +1010,18 @@ void bfin_special_gpio_free(unsigned gpio)
 
 	might_sleep();
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
-	if (unlikely(!(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+	if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
 		gpio_error(gpio);
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		return;
 	}
 
-	reserved_special_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
-	reserved_peri_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+	unreserve(special_gpio, gpio);
+	unreserve(peri, gpio);
 	set_label(gpio, "free");
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 EXPORT_SYMBOL(bfin_special_gpio_free);
 #endif
@@ -978,26 +1034,26 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label)
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
-	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(is_reserved(peri, gpio, 1))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		printk(KERN_ERR
 		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
 		       gpio, get_label(gpio));
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		return -EBUSY;
 	}
-	if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))
+	if (unlikely(is_reserved(gpio, gpio, 1)))
 		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved by %s! "
 		       "(Documentation/blackfin/bfin-gpio-notes.txt)\n",
 		       gpio, get_label(gpio));
 
-	reserved_gpio_irq_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+	reserve(gpio_irq, gpio);
 	set_label(gpio, label);
 
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 
 	port_setup(gpio, GPIO_USAGE);
 
@@ -1011,21 +1067,21 @@ void bfin_gpio_irq_free(unsigned gpio)
 	if (check_gpio(gpio) < 0)
 		return;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
-	if (unlikely(!(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+	if (unlikely(!is_reserved(gpio_irq, gpio, 0))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		gpio_error(gpio);
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		return;
 	}
 
-	reserved_gpio_irq_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+	unreserve(gpio_irq, gpio);
 
 	set_label(gpio, "free");
 
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 
 static inline void __bfin_gpio_direction_input(unsigned gpio)
@@ -1042,15 +1098,15 @@ int bfin_gpio_direction_input(unsigned gpio)
 {
 	unsigned long flags;
 
-	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(!is_reserved(gpio, gpio, 0))) {
 		gpio_error(gpio);
 		return -EINVAL;
 	}
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	__bfin_gpio_direction_input(gpio);
 	AWA_DUMMY_READ(inen);
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 
 	return 0;
 }
@@ -1065,9 +1121,9 @@ void bfin_gpio_irq_prepare(unsigned gpio)
 	port_setup(gpio, GPIO_USAGE);
 
 #ifdef CONFIG_BF54x
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	__bfin_gpio_direction_input(gpio);
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 #endif
 }
 
@@ -1084,12 +1140,12 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
 {
 	unsigned long flags;
 
-	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(!is_reserved(gpio, gpio, 0))) {
 		gpio_error(gpio);
 		return -EINVAL;
 	}
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
 	gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
 	gpio_set_value(gpio, value);
@@ -1100,7 +1156,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
 #endif
 
 	AWA_DUMMY_READ(dir);
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 
 	return 0;
 }
@@ -1115,11 +1171,11 @@ int bfin_gpio_get_value(unsigned gpio)
 
 	if (unlikely(get_gpio_edge(gpio))) {
 		int ret;
-		local_irq_save_hw(flags);
+		flags = hard_local_irq_save();
 		set_gpio_edge(gpio, 0);
 		ret = get_gpio_data(gpio);
 		set_gpio_edge(gpio, 1);
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		return ret;
 	} else
 		return get_gpio_data(gpio);
@@ -1153,13 +1209,13 @@ static int gpio_proc_read(char *buf, char **start, off_t offset,
 	int c, irq, gpio, outlen = 0;
 
 	for (c = 0; c < MAX_RESOURCES; c++) {
-		irq = reserved_gpio_irq_map[gpio_bank(c)] & gpio_bit(c);
-		gpio = reserved_gpio_map[gpio_bank(c)] & gpio_bit(c);
+		irq = is_reserved(gpio_irq, c, 1);
+		gpio = is_reserved(gpio, c, 1);
 		if (!check_gpio(c) && (gpio || irq))
 			len = sprintf(buf, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c,
 				 get_label(c), (gpio && irq) ? " *" : "",
 				 get_gpio_dir(c) ? "OUTPUT" : "INPUT");
-		else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c))
+		else if (is_reserved(peri, c, 1))
 			len = sprintf(buf, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c));
 		else
 			continue;
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index 30fd6417f069..c15fd05f0b09 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -13,10 +13,6 @@
 #include <asm/cplbinit.h>
 #include <asm/mem_map.h>
 
-#if ANOMALY_05000263
-# error the MPU will not function safely while Anomaly 05000263 applies
-#endif
-
 struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS];
 struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS];
 
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 87b25b1b30ed..8de92299b3ee 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -318,7 +318,7 @@ void flush_switched_cplbs(unsigned int cpu)
 
 	nr_cplb_flush[cpu]++;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	_disable_icplb();
 	for (i = first_switched_icplb; i < MAX_CPLBS; i++) {
 		icplb_tbl[cpu][i].data = 0;
@@ -332,7 +332,7 @@ void flush_switched_cplbs(unsigned int cpu)
 		bfin_write32(DCPLB_DATA0 + i * 4, 0);
 	}
 	_enable_dcplb();
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 
 }
 
@@ -348,7 +348,7 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu)
 		return;
 	}
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	current_rwx_mask[cpu] = masks;
 
 	if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
@@ -373,5 +373,5 @@ void set_mask_dcplbs(unsigned long *masks, unsigned int cpu)
 		addr += PAGE_SIZE;
 	}
 	_enable_dcplb();
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S
index d66446b572c0..7eed00bbd26d 100644
--- a/arch/blackfin/kernel/ftrace-entry.S
+++ b/arch/blackfin/kernel/ftrace-entry.S
@@ -10,6 +10,18 @@
 
 .text
 
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+/* Simple stub so we can boot the kernel until runtime patching has
+ * disabled all calls to this.  Then it'll be unused.
+ */
+ENTRY(__mcount)
+# if ANOMALY_05000371
+	nop; nop; nop; nop;
+# endif
+	rts;
+ENDPROC(__mcount)
+
 /* GCC will have called us before setting up the function prologue, so we
  * can clobber the normal scratch registers, but we need to make sure to
  * save/restore the registers used for argument passing (R0-R2) in case
@@ -20,15 +32,65 @@
  * function.  And since GCC pushed the previous RETS for us, the previous
  * function will be waiting there.  mmmm pie.
  */
+ENTRY(_ftrace_caller)
+# ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	/* optional micro optimization: return if stopped */
+	p1.l = _function_trace_stop;
+	p1.h = _function_trace_stop;
+	r3 = [p1];
+	cc = r3 == 0;
+	if ! cc jump _ftrace_stub (bp);
+# endif
+
+	/* save first/second/third function arg and the return register */
+	[--sp] = r2;
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	/* function_trace_call(unsigned long ip, unsigned long parent_ip):
+	 *  ip: this point was called by ...
+	 *  parent_ip: ... this function
+	 * the ip itself will need adjusting for the mcount call
+	 */
+	r0 = rets;
+	r1 = [sp + 16];	/* skip the 4 local regs on stack */
+	r0 += -MCOUNT_INSN_SIZE;
+
+.globl _ftrace_call
+_ftrace_call:
+	call _ftrace_stub
+
+# ifdef CONFIG_FUNCTION_GRAPH_TRACER
+.globl _ftrace_graph_call
+_ftrace_graph_call:
+	nop;	/* jump _ftrace_graph_caller; */
+# endif
+
+	/* restore state and get out of dodge */
+.Lfinish_trace:
+	rets = [sp++];
+	r1 = [sp++];
+	r0 = [sp++];
+	r2 = [sp++];
+
+.globl _ftrace_stub
+_ftrace_stub:
+	rts;
+ENDPROC(_ftrace_caller)
+
+#else
+
+/* See documentation for _ftrace_caller */
 ENTRY(__mcount)
-#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
+# ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	/* optional micro optimization: return if stopped */
 	p1.l = _function_trace_stop;
 	p1.h = _function_trace_stop;
 	r3 = [p1];
 	cc = r3 == 0;
 	if ! cc jump _ftrace_stub (bp);
-#endif
+# endif
 
 	/* save third function arg early so we can do testing below */
 	[--sp] = r2;
@@ -44,7 +106,7 @@ ENTRY(__mcount)
 	cc = r2 == r3;
 	if ! cc jump .Ldo_trace;
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+# ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	/* if the ftrace_graph_return function pointer is not set to
 	 * the ftrace_stub entry, call prepare_ftrace_return().
 	 */
@@ -64,7 +126,7 @@ ENTRY(__mcount)
 	r3 = [p0];
 	cc = r2 == r3;
 	if ! cc jump _ftrace_graph_caller;
-#endif
+# endif
 
 	r2 = [sp++];
 	rts;
@@ -103,6 +165,8 @@ _ftrace_stub:
 	rts;
 ENDPROC(__mcount)
 
+#endif
+
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 /* The prepare_ftrace_return() function is similar to the trace function
  * except it takes a pointer to the location of the frompc.  This is so
@@ -110,6 +174,7 @@ ENDPROC(__mcount)
  * purposes.
  */
 ENTRY(_ftrace_graph_caller)
+# ifndef CONFIG_DYNAMIC_FTRACE
 	/* save first/second function arg and the return register */
 	[--sp] = r0;
 	[--sp] = r1;
@@ -118,9 +183,13 @@ ENTRY(_ftrace_graph_caller)
 	/* prepare_ftrace_return(parent, self_addr, frame_pointer) */
 	r0 = sp;	/* unsigned long *parent */
 	r1 = rets;	/* unsigned long self_addr */
-#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
+# else
+	r0 = sp;	/* unsigned long *parent */
+	r1 = [sp];	/* unsigned long self_addr */
+# endif
+# ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
 	r2 = fp;	/* unsigned long frame_pointer */
-#endif
+# endif
 	r0 += 16;	/* skip the 4 local regs on stack */
 	r1 += -MCOUNT_INSN_SIZE;
 	call _prepare_ftrace_return;
@@ -139,9 +208,9 @@ ENTRY(_return_to_handler)
 	[--sp] = r1;
 
 	/* get original return address */
-#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
+# ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
 	r0 = fp;	/* Blackfin is sane, so omit this */
-#endif
+# endif
 	call _ftrace_return_to_handler;
 	rets = r0;
 
diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c
index a61d948ea925..48808a12b427 100644
--- a/arch/blackfin/kernel/ftrace.c
+++ b/arch/blackfin/kernel/ftrace.c
@@ -1,17 +1,101 @@
 /*
  * ftrace graph code
  *
- * Copyright (C) 2009 Analog Devices Inc.
+ * Copyright (C) 2009-2010 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 #include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/uaccess.h>
 #include <asm/atomic.h>
+#include <asm/cacheflush.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+static const unsigned char mnop[] = {
+	0x03, 0xc0, 0x00, 0x18, /* MNOP; */
+	0x03, 0xc0, 0x00, 0x18, /* MNOP; */
+};
+
+static void bfin_make_pcrel24(unsigned char *insn, unsigned long src,
+                              unsigned long dst)
+{
+	uint32_t pcrel = (dst - src) >> 1;
+	insn[0] = pcrel >> 16;
+	insn[1] = 0xe3;
+	insn[2] = pcrel;
+	insn[3] = pcrel >> 8;
+}
+#define bfin_make_pcrel24(insn, src, dst) bfin_make_pcrel24(insn, src, (unsigned long)(dst))
+
+static int ftrace_modify_code(unsigned long ip, const unsigned char *code,
+                              unsigned long len)
+{
+	int ret = probe_kernel_write((void *)ip, (void *)code, len);
+	flush_icache_range(ip, ip + len);
+	return ret;
+}
+
+int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
+                    unsigned long addr)
+{
+	/* Turn the mcount call site into two MNOPs as those are 32bit insns */
+	return ftrace_modify_code(rec->ip, mnop, sizeof(mnop));
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	/* Restore the mcount call site */
+	unsigned char call[8];
+	call[0] = 0x67; /* [--SP] = RETS; */
+	call[1] = 0x01;
+	bfin_make_pcrel24(&call[2], rec->ip + 2, addr);
+	call[6] = 0x27; /* RETS = [SP++]; */
+	call[7] = 0x01;
+	return ftrace_modify_code(rec->ip, call, sizeof(call));
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned char call[4];
+	unsigned long ip = (unsigned long)&ftrace_call;
+	bfin_make_pcrel24(call, ip, func);
+	return ftrace_modify_code(ip, call, sizeof(call));
+}
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	/* return value is done indirectly via data */
+	*(unsigned long *)data = 0;
+
+	return 0;
+}
+
+#endif
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
+# ifdef CONFIG_DYNAMIC_FTRACE
+
+extern void ftrace_graph_call(void);
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned long ip = (unsigned long)&ftrace_graph_call;
+	uint16_t jump_pcrel12 = ((unsigned long)&ftrace_graph_caller - ip) >> 1;
+	jump_pcrel12 |= 0x2000;
+	return ftrace_modify_code(ip, (void *)&jump_pcrel12, sizeof(jump_pcrel12));
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_code((unsigned long)&ftrace_graph_call, empty_zero_page, 2);
+}
+
+# endif
+
 /*
  * Hook the return address and push it in the stack of return addrs
  * in current thread info.
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index 1a496cd71ba2..3b1da4aff2a1 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -219,10 +219,10 @@ int __ipipe_syscall_root(struct pt_regs *regs)
 
 	ret = __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs);
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
 	if (!__ipipe_root_domain_p) {
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		return 1;
 	}
 
@@ -230,7 +230,7 @@ int __ipipe_syscall_root(struct pt_regs *regs)
 	if ((p->irqpend_himask & IPIPE_IRQMASK_VIRT) != 0)
 		__ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT);
 
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 
 	return -ret;
 }
@@ -239,14 +239,14 @@ unsigned long ipipe_critical_enter(void (*syncfn) (void))
 {
 	unsigned long flags;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
 	return flags;
 }
 
 void ipipe_critical_exit(unsigned long flags)
 {
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 
 static void __ipipe_no_irqtail(void)
@@ -279,9 +279,9 @@ int ipipe_trigger_irq(unsigned irq)
 		return -EINVAL;
 #endif
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	__ipipe_handle_irq(irq, NULL);
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 
 	return 1;
 }
@@ -293,7 +293,7 @@ asmlinkage void __ipipe_sync_root(void)
 
 	BUG_ON(irqs_disabled());
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
 	if (irq_tail_hook)
 		irq_tail_hook();
@@ -303,7 +303,7 @@ asmlinkage void __ipipe_sync_root(void)
 	if (ipipe_root_cpudom_var(irqpend_himask) != 0)
 		__ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
 
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 
 void ___ipipe_sync_pipeline(unsigned long syncmask)
@@ -344,10 +344,10 @@ void __ipipe_stall_root(void)
 {
 	unsigned long *p, flags;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	p = &__ipipe_root_status;
 	__set_bit(IPIPE_STALL_FLAG, p);
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 EXPORT_SYMBOL(__ipipe_stall_root);
 
@@ -356,10 +356,10 @@ unsigned long __ipipe_test_and_stall_root(void)
 	unsigned long *p, flags;
 	int x;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	p = &__ipipe_root_status;
 	x = __test_and_set_bit(IPIPE_STALL_FLAG, p);
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 
 	return x;
 }
@@ -371,10 +371,10 @@ unsigned long __ipipe_test_root(void)
 	unsigned long flags;
 	int x;
 
-	local_irq_save_hw_smp(flags);
+	flags = hard_local_irq_save_smp();
 	p = &__ipipe_root_status;
 	x = test_bit(IPIPE_STALL_FLAG, p);
-	local_irq_restore_hw_smp(flags);
+	hard_local_irq_restore_smp(flags);
 
 	return x;
 }
@@ -384,10 +384,10 @@ void __ipipe_lock_root(void)
 {
 	unsigned long *p, flags;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	p = &__ipipe_root_status;
 	__set_bit(IPIPE_SYNCDEFER_FLAG, p);
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 EXPORT_SYMBOL(__ipipe_lock_root);
 
@@ -395,9 +395,9 @@ void __ipipe_unlock_root(void)
 {
 	unsigned long *p, flags;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	p = &__ipipe_root_status;
 	__clear_bit(IPIPE_SYNCDEFER_FLAG, p);
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 EXPORT_SYMBOL(__ipipe_unlock_root);
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index 08bc44ea6883..edae461b1c54 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -320,7 +320,7 @@ static void bfin_correct_hw_break(void)
 	}
 }
 
-void kgdb_disable_hw_debug(struct pt_regs *regs)
+static void bfin_disable_hw_debug(struct pt_regs *regs)
 {
 	/* Disable hardware debugging while we are in kgdb */
 	bfin_write_WPIACTL(0);
@@ -406,6 +406,7 @@ struct kgdb_arch arch_kgdb_ops = {
 #endif
 	.set_hw_breakpoint = bfin_set_hw_break,
 	.remove_hw_breakpoint = bfin_remove_hw_break,
+	.disable_hw_break = bfin_disable_hw_debug,
 	.remove_all_hw_break = bfin_remove_all_hw_break,
 	.correct_hw_break = bfin_correct_hw_break,
 };
diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c
index 9a4b07594389..08c0236acf3c 100644
--- a/arch/blackfin/kernel/kgdb_test.c
+++ b/arch/blackfin/kernel/kgdb_test.c
@@ -88,6 +88,7 @@ static const struct file_operations kgdb_test_proc_fops = {
 	.owner = THIS_MODULE,
 	.read  = kgdb_test_proc_read,
 	.write = kgdb_test_proc_write,
+	.llseek = noop_llseek,
 };
 
 static int __init kgdbtest_init(void)
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 93ec07da2e51..cd0c090ebc54 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -65,11 +65,11 @@ static void default_idle(void)
 #ifdef CONFIG_IPIPE
 	ipipe_suspend_domain();
 #endif
-	local_irq_disable_hw();
+	hard_local_irq_disable();
 	if (!need_resched())
 		idle_with_irq_disabled();
 
-	local_irq_enable_hw();
+	hard_local_irq_enable();
 }
 
 /*
@@ -209,7 +209,9 @@ copy_thread(unsigned long clone_flags,
 /*
  * sys_execve() executes a new program.
  */
-asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp)
+asmlinkage int sys_execve(const char __user *name,
+			  const char __user *const __user *argv,
+			  const char __user *const __user *envp)
 {
 	int error;
 	char *filename;
@@ -491,6 +493,11 @@ int _access_ok(unsigned long addr, unsigned long size)
 		return 1;
 #endif
 
+#ifndef CONFIG_EXCEPTION_L1_SCRATCH
+	if (in_mem_const(addr, size, (unsigned long)l1_stack_base, l1_stack_len))
+		return 1;
+#endif
+
 	aret = in_async(addr, size);
 	if (aret < 2)
 		return aret;
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 6ec77685df52..75089f80855d 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -27,6 +27,7 @@
 #include <asm/fixed_code.h>
 #include <asm/cacheflush.h>
 #include <asm/mem_map.h>
+#include <asm/mmu_context.h>
 
 /*
  * does not yet catch signals sent when the child dies.
@@ -37,12 +38,13 @@
  * Get contents of register REGNO in task TASK.
  */
 static inline long
-get_reg(struct task_struct *task, long regno, unsigned long __user *datap)
+get_reg(struct task_struct *task, unsigned long regno,
+	unsigned long __user *datap)
 {
 	long tmp;
 	struct pt_regs *regs = task_pt_regs(task);
 
-	if (regno & 3 || regno > PT_LAST_PSEUDO || regno < 0)
+	if (regno & 3 || regno > PT_LAST_PSEUDO)
 		return -EIO;
 
 	switch (regno) {
@@ -73,11 +75,11 @@ get_reg(struct task_struct *task, long regno, unsigned long __user *datap)
  * Write contents of register REGNO in task TASK.
  */
 static inline int
-put_reg(struct task_struct *task, long regno, unsigned long data)
+put_reg(struct task_struct *task, unsigned long regno, unsigned long data)
 {
 	struct pt_regs *regs = task_pt_regs(task);
 
-	if (regno & 3 || regno > PT_LAST_PSEUDO || regno < 0)
+	if (regno & 3 || regno > PT_LAST_PSEUDO)
 		return -EIO;
 
 	switch (regno) {
@@ -113,8 +115,8 @@ put_reg(struct task_struct *task, long regno, unsigned long data)
 /*
  * check that an address falls within the bounds of the target process's memory mappings
  */
-static inline int is_user_addr_valid(struct task_struct *child,
-				     unsigned long start, unsigned long len)
+int
+is_user_addr_valid(struct task_struct *child, unsigned long start, unsigned long len)
 {
 	struct vm_area_struct *vma;
 	struct sram_list_struct *sraml;
@@ -135,6 +137,13 @@ static inline int is_user_addr_valid(struct task_struct *child,
 	if (start >= FIXED_CODE_START && start + len < FIXED_CODE_END)
 		return 0;
 
+#ifdef CONFIG_APP_STACK_L1
+	if (child->mm->context.l1_stack_save)
+		if (start >= (unsigned long)l1_stack_base &&
+			start + len < (unsigned long)l1_stack_base + l1_stack_len)
+			return 0;
+#endif
+
 	return -EIO;
 }
 
@@ -232,7 +241,8 @@ void user_disable_single_step(struct task_struct *child)
 	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
 }
 
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
 {
 	int ret;
 	unsigned long __user *datap = (unsigned long __user *)data;
@@ -360,14 +370,14 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		return copy_regset_to_user(child, &user_bfin_native_view,
 					   REGSET_GENERAL,
 					   0, sizeof(struct pt_regs),
-					   (void __user *)data);
+					   datap);
 
 	case PTRACE_SETREGS:
 		pr_debug("ptrace: PTRACE_SETREGS\n");
 		return copy_regset_from_user(child, &user_bfin_native_view,
 					     REGSET_GENERAL,
 					     0, sizeof(struct pt_regs),
-					     (const void __user *)data);
+					     datap);
 
 	case_default:
 	default:
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index d37a397f43f5..ac71dc15cbdb 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -864,6 +864,13 @@ void __init setup_arch(char **cmdline_p)
 	bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
 	bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
 #endif
+#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
+	bfin_write_PORTF_HYSTERISIS(HYST_PORTF_0_15);
+	bfin_write_PORTG_HYSTERISIS(HYST_PORTG_0_15);
+	bfin_write_PORTH_HYSTERISIS(HYST_PORTH_0_15);
+	bfin_write_MISCPORT_HYSTERISIS((bfin_read_MISCPORT_HYSTERISIS() &
+					~HYST_NONEGPIO_MASK) | HYST_NONEGPIO);
+#endif
 
 	cclk = get_cclk();
 	sclk = get_sclk();
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index bdc1e2f0da32..89448ed7065d 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -21,6 +21,8 @@
 
 #include <asm/cacheflush.h>
 #include <asm/dma.h>
+#include <asm/cachectl.h>
+#include <asm/ptrace.h>
 
 asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags)
 {
@@ -70,3 +72,16 @@ asmlinkage int sys_bfin_spinlock(int *p)
 
 	return ret;
 }
+
+SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, len, int, op)
+{
+	if (is_user_addr_valid(current, addr, len) != 0)
+		return -EINVAL;
+
+	if (op & DCACHE)
+		blackfin_dcache_flush_range(addr, addr + len);
+	if (op & ICACHE)
+		blackfin_icache_flush_range(addr, addr + len);
+
+	return 0;
+}
diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c
index 59fcdf6b0138..05b550891ce5 100644
--- a/arch/blackfin/kernel/trace.c
+++ b/arch/blackfin/kernel/trace.c
@@ -15,6 +15,7 @@
 #include <linux/kallsyms.h>
 #include <linux/err.h>
 #include <linux/fs.h>
+#include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/trace.h>
 #include <asm/fixed_code.h>
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 984c78172397..4122678529c0 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -48,15 +48,10 @@ SECTIONS
 #if !L1_CODE_LENGTH
 		*(.l1.text)
 #endif
-
-		. = ALIGN(16);
-		___start___ex_table = .;
-		*(__ex_table)
-		___stop___ex_table = .;
-
 		__etext = .;
 	}
 
+	EXCEPTION_TABLE(4)
 	NOTES
 
 	/* Just in case the first read only is a 32-bit access */
diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig
index 4ab2d166c832..1d9f631a7f94 100644
--- a/arch/blackfin/mach-bf518/Kconfig
+++ b/arch/blackfin/mach-bf518/Kconfig
@@ -62,6 +62,67 @@ config BF518_UART1_PORTG
 	  PORT G
 endchoice
 
+comment "Hysteresis/Schmitt Trigger Control"
+config BFIN_HYSTERESIS_CONTROL
+	bool "Enable Hysteresis Control"
+	help
+	  The ADSP-BF51x allows to control input hysteresis for Port F,
+	  Port G and Port H and other processor signal inputs.
+	  The Schmitt trigger enables can be set only for pin groups.
+	  Saying Y will overwrite the default reset or boot loader
+	  initialization.
+
+menu "PORT F"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTF_0_7
+	bool "Enable Hysteresis on PORTF {0...7}"
+config GPIO_HYST_PORTF_8_9
+	bool "Enable Hysteresis on PORTF {8, 9}"
+config GPIO_HYST_PORTF_10
+	bool "Enable Hysteresis on PORTF 10"
+config GPIO_HYST_PORTF_11
+	bool "Enable Hysteresis on PORTF 11"
+config GPIO_HYST_PORTF_12_13
+	bool "Enable Hysteresis on PORTF {12, 13}"
+config GPIO_HYST_PORTF_14_15
+	bool "Enable Hysteresis on PORTF {14, 15}"
+endmenu
+
+menu "PORT G"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTG_0
+	bool "Enable Hysteresis on PORTG 0"
+config GPIO_HYST_PORTG_1_4
+	bool "Enable Hysteresis on PORTG {1...4}"
+config GPIO_HYST_PORTG_5_6
+	bool "Enable Hysteresis on PORTG {5, 6}"
+config GPIO_HYST_PORTG_7_8
+	bool "Enable Hysteresis on PORTG {7, 8}"
+config GPIO_HYST_PORTG_9
+	bool "Enable Hysteresis on PORTG 9"
+config GPIO_HYST_PORTG_10
+	bool "Enable Hysteresis on PORTG 10"
+config GPIO_HYST_PORTG_11_13
+	bool "Enable Hysteresis on PORTG {11...13}"
+config GPIO_HYST_PORTG_14_15
+	bool "Enable Hysteresis on PORTG {14, 15}"
+endmenu
+
+menu "PORT H"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTH_0_7
+	bool "Enable Hysteresis on PORTH {0...7}"
+
+endmenu
+
+menu "None-GPIO"
+	depends on BFIN_HYSTERESIS_CONTROL
+config NONEGPIO_HYST_NMI_RST_BMODE
+	bool "Enable Hysteresis on {NMI, RESET, BMODE}"
+config NONEGPIO_HYST_JTAG
+	bool "Enable Hysteresis on JTAG"
+endmenu
+
 comment "Interrupt Priority Assignment"
 menu "Priority"
 
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 44d6d5299022..b894c8abe7ec 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -87,13 +87,55 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = {
+	P_MII0_ETxD0,
+	P_MII0_ETxD1,
+	P_MII0_ETxEN,
+	P_MII0_ERxD0,
+	P_MII0_ERxD1,
+	P_MII0_TxCLK,
+	P_MII0_PHYINT,
+	P_MII0_CRS,
+	P_MII0_MDC,
+	P_MII0_MDIO,
+	0
+};
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+	{
+		.addr = 2,
+		.irq = IRQ_MAC_PHYINT,
+	},
+	{
+		.addr = 3,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 3,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
@@ -312,7 +354,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI (0) */
 static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 5,
+	.num_chipselect = 6,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
@@ -347,7 +389,7 @@ static struct platform_device bfin_spi0_device = {
 
 /* SPI (1) */
 static struct bfin5xx_spi_master bfin_spi1_info = {
-	.num_chipselect = 5,
+	.num_chipselect = 6,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
@@ -525,6 +567,14 @@ static struct platform_device bfin_sir1_device = {
 #endif
 #endif
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
 	[0] = {
@@ -559,6 +609,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = IRQ_PF8,
 	},
 #endif
+#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -736,6 +791,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&i2c_bfin_twi_device,
 #endif
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 	&bfin_sport0_uart_device,
diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
index 9b72e5cb21fe..e6ce1d7c523a 100644
--- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c
+++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
@@ -81,13 +81,35 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 #endif
 
@@ -291,7 +313,7 @@ static struct platform_device bfin_spi0_device = {
 
 /* SPI (1) */
 static struct bfin5xx_spi_master bfin_spi1_info = {
-	.num_chipselect = 5,
+	.num_chipselect = 6,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index 2829dd0400f1..24918c5f7ea1 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -5,13 +5,13 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
- *  - Revision C, 06/12/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
+ *  - Revision E, 01/26/2010; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
 /* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */
@@ -24,6 +24,8 @@
 
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
@@ -52,6 +54,8 @@
 #define ANOMALY_05000430 (__SILICON_REVISION__ < 1)
 /* Incorrect Use of Stack in Lockbox Firmware During Authentication */
 #define ANOMALY_05000431 (1)
+/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
+#define ANOMALY_05000434 (1)
 /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
 #define ANOMALY_05000435 (__SILICON_REVISION__ < 1)
 /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
@@ -74,14 +78,21 @@
 #define ANOMALY_05000461 (1)
 /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
 #define ANOMALY_05000462 (1)
-/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+/* PLL Latches Incorrect Settings During Reset */
+#define ANOMALY_05000469 (1)
+/* Incorrect Default MSEL Value in PLL_CTL */
+#define ANOMALY_05000472 (1)
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
 #define ANOMALY_05000473 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
-#define ANOMALY_05000119 (0)
 #define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
 #define ANOMALY_05000149 (0)
@@ -94,6 +105,7 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
@@ -143,5 +155,6 @@
 #define ANOMALY_05000467 (0)
 #define ANOMALY_05000474 (0)
 #define ANOMALY_05000475 (0)
+#define ANOMALY_05000485 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/bf518.h b/arch/blackfin/mach-bf518/include/mach/bf518.h
index 856b330ecf0b..6906dee4f4cc 100644
--- a/arch/blackfin/mach-bf518/include/mach/bf518.h
+++ b/arch/blackfin/mach-bf518/include/mach/bf518.h
@@ -85,6 +85,111 @@
 
 #define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
 
+/**************************** Hysteresis Settings ****************************/
+
+#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
+#ifdef CONFIG_GPIO_HYST_PORTF_0_7
+#define HYST_PORTF_0_7		(1 << 0)
+#else
+#define HYST_PORTF_0_7		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_8_9
+#define HYST_PORTF_8_9		(1 << 2)
+#else
+#define HYST_PORTF_8_9		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_10
+#define HYST_PORTF_10		(1 << 4)
+#else
+#define HYST_PORTF_10		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_11
+#define HYST_PORTF_11		(1 << 6)
+#else
+#define HYST_PORTF_11		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_12_13
+#define HYST_PORTF_12_13	(1 << 8)
+#else
+#define HYST_PORTF_12_13	(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_14_15
+#define HYST_PORTF_14_15	(1 << 10)
+#else
+#define HYST_PORTF_14_15	(0 << 10)
+#endif
+
+#define HYST_PORTF_0_15	(HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \
+		HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTG_0
+#define HYST_PORTG_0		(1 << 0)
+#else
+#define HYST_PORTG_0		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_1_4
+#define HYST_PORTG_1_4		(1 << 2)
+#else
+#define HYST_PORTG_1_4		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_5_6
+#define HYST_PORTG_5_6		(1 << 4)
+#else
+#define HYST_PORTG_5_6		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_7_8
+#define HYST_PORTG_7_8		(1 << 6)
+#else
+#define HYST_PORTG_7_8		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_9
+#define HYST_PORTG_9		(1 << 8)
+#else
+#define HYST_PORTG_9		(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_10
+#define HYST_PORTG_10		(1 << 10)
+#else
+#define HYST_PORTG_10		(0 << 10)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_11_13
+#define HYST_PORTG_11_13	(1 << 12)
+#else
+#define HYST_PORTG_11_13	(0 << 12)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_14_15
+#define HYST_PORTG_14_15	(1 << 14)
+#else
+#define HYST_PORTG_14_15	(0 << 14)
+#endif
+
+#define HYST_PORTG_0_15	(HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \
+		HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \
+		HYST_PORTG_11_13 | HYST_PORTG_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTH_0_7
+#define HYST_PORTH_0_7		(1 << 0)
+#else
+#define HYST_PORTH_0_7		(0 << 0)
+#endif
+
+#define HYST_PORTH_0_15	(HYST_PORTH_0_7)
+
+#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE
+#define HYST_NMI_RST_BMODE		(1 << 2)
+#else
+#define HYST_NMI_RST_BMODE		(0 << 2)
+#endif
+#ifdef CONFIG_NONEGPIO_HYST_JTAG
+#define HYST_JTAG			(1 << 4)
+#else
+#define HYST_JTAG			(0 << 4)
+#endif
+
+#define HYST_NONEGPIO	(HYST_NMI_RST_BMODE | HYST_JTAG)
+#define HYST_NONEGPIO_MASK		(0x3C)
+#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */
+
 #ifdef CONFIG_BF518
 #define CPU "BF518"
 #define CPUID 0x27e8
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
index e548e9d1d6fa..e16969f24ffd 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
@@ -262,14 +262,14 @@
 #define bfin_write_SPORT0_TX(val)		bfin_write32(SPORT0_TX, val)
 #define bfin_read_SPORT0_RX()			bfin_read32(SPORT0_RX)
 #define bfin_write_SPORT0_RX(val)		bfin_write32(SPORT0_RX, val)
-#define bfin_read_SPORT0_TX32()			bfin_read32(SPORT0_TX32)
-#define bfin_write_SPORT0_TX32(val)		bfin_write32(SPORT0_TX32, val)
-#define bfin_read_SPORT0_RX32()			bfin_read32(SPORT0_RX32)
-#define bfin_write_SPORT0_RX32(val)		bfin_write32(SPORT0_RX32, val)
-#define bfin_read_SPORT0_TX16()			bfin_read16(SPORT0_TX16)
-#define bfin_write_SPORT0_TX16(val)		bfin_write16(SPORT0_TX16, val)
-#define bfin_read_SPORT0_RX16()			bfin_read16(SPORT0_RX16)
-#define bfin_write_SPORT0_RX16(val)		bfin_write16(SPORT0_RX16, val)
+#define bfin_read_SPORT0_TX32()			bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val)		bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX32()			bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val)		bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_TX16()			bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val)		bfin_write16(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX16()			bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val)		bfin_write16(SPORT0_RX, val)
 #define bfin_read_SPORT0_RCR1()			bfin_read16(SPORT0_RCR1)
 #define bfin_write_SPORT0_RCR1(val)		bfin_write16(SPORT0_RCR1, val)
 #define bfin_read_SPORT0_RCR2()			bfin_read16(SPORT0_RCR2)
@@ -317,14 +317,14 @@
 #define bfin_write_SPORT1_TX(val)		bfin_write32(SPORT1_TX, val)
 #define bfin_read_SPORT1_RX()			bfin_read32(SPORT1_RX)
 #define bfin_write_SPORT1_RX(val)		bfin_write32(SPORT1_RX, val)
-#define bfin_read_SPORT1_TX32()			bfin_read32(SPORT1_TX32)
-#define bfin_write_SPORT1_TX32(val)		bfin_write32(SPORT1_TX32, val)
-#define bfin_read_SPORT1_RX32()			bfin_read32(SPORT1_RX32)
-#define bfin_write_SPORT1_RX32(val)		bfin_write32(SPORT1_RX32, val)
-#define bfin_read_SPORT1_TX16()			bfin_read16(SPORT1_TX16)
-#define bfin_write_SPORT1_TX16(val)		bfin_write16(SPORT1_TX16, val)
-#define bfin_read_SPORT1_RX16()			bfin_read16(SPORT1_RX16)
-#define bfin_write_SPORT1_RX16(val)		bfin_write16(SPORT1_RX16, val)
+#define bfin_read_SPORT1_TX32()			bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val)		bfin_write32(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX32()			bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val)		bfin_write32(SPORT1_RX, val)
+#define bfin_read_SPORT1_TX16()			bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val)		bfin_write16(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX16()			bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val)		bfin_write16(SPORT1_RX, val)
 #define bfin_read_SPORT1_RCR1()			bfin_read16(SPORT1_RCR1)
 #define bfin_write_SPORT1_RCR1(val)		bfin_write16(SPORT1_RCR1, val)
 #define bfin_read_SPORT1_RCR2()			bfin_read16(SPORT1_RCR2)
@@ -1058,54 +1058,4 @@
 /* These need to be last due to the cdef/linux inter-dependencies */
 #include <asm/irq.h>
 
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
-	unsigned long flags, iwr0, iwr1;
-
-	if (val == bfin_read_PLL_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr0 = bfin_read32(SIC_IWR0);
-	iwr1 = bfin_read32(SIC_IWR1);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
-	bfin_write32(SIC_IWR1, 0);
-
-	bfin_write16(PLL_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR0, iwr0);
-	bfin_write32(SIC_IWR1, iwr1);
-	local_irq_restore_hw(flags);
-}
-
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
-	unsigned long flags, iwr0, iwr1;
-
-	if (val == bfin_read_VR_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr0 = bfin_read32(SIC_IWR0);
-	iwr1 = bfin_read32(SIC_IWR1);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
-	bfin_write32(SIC_IWR1, 0);
-
-	bfin_write16(VR_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR0, iwr0);
-	bfin_write32(SIC_IWR1, iwr1);
-	local_irq_restore_hw(flags);
-}
-
 #endif /* _CDEF_BF52X_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h
index 92e950d6e996..98a51c479290 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h
@@ -45,139 +45,4 @@
 #define RSI_PID6                       0xFFC03FF8 /* RSI Peripheral ID Register 6 */
 #define RSI_PID7                       0xFFC03FFC /* RSI Peripheral ID Register 7 */
 
-/* ********************************************************** */
-/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
-/*     and MULTI BIT READ MACROS                              */
-/* ********************************************************** */
-
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 #endif /* _DEF_BF514_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index 9241205fb992..5f84913dcd91 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -458,22 +458,22 @@
 
 /* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
 #define TWI0_REGBASE			0xFFC01400
-#define TWI_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
-#define TWI_CONTROL			0xFFC01404	/* TWI Control Register						*/
-#define TWI_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
-#define TWI_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
-#define TWI_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
-#define TWI_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
-#define TWI_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
-#define TWI_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
-#define TWI_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
-#define TWI_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
-#define TWI_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
-#define TWI_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
-#define TWI_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
-#define TWI_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
-#define TWI_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
-#define TWI_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
+#define TWI0_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
+#define TWI0_CONTROL			0xFFC01404	/* TWI Control Register						*/
+#define TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
+#define TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
+#define TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
+#define TWI0_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
+#define TWI0_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
+#define TWI0_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
+#define TWI0_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
+#define TWI0_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
+#define TWI0_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
+#define TWI0_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
+#define TWI0_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
+#define TWI0_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
+#define TWI0_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
+#define TWI0_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
 
 
 /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
@@ -748,51 +748,6 @@
 #define FFE			0x20		/* Force Framing Error On Transmit	*/
 
 
-/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  ****************************/
-/* SPI_CTL Masks																	*/
-#define	TIMOD		0x0003		/* Transfer Initiate Mode							*/
-#define RDBR_CORE	0x0000		/* 		RDBR Read Initiates, IRQ When RDBR Full		*/
-#define	TDBR_CORE	0x0001		/* 		TDBR Write Initiates, IRQ When TDBR Empty	*/
-#define RDBR_DMA	0x0002		/* 		DMA Read, DMA Until FIFO Empty				*/
-#define TDBR_DMA	0x0003		/* 		DMA Write, DMA Until FIFO Full				*/
-#define SZ			0x0004		/* Send Zero (When TDBR Empty, Send Zero/Last*)		*/
-#define GM			0x0008		/* Get More (When RDBR Full, Overwrite/Discard*)	*/
-#define PSSE		0x0010		/* Slave-Select Input Enable						*/
-#define EMISO		0x0020		/* Enable MISO As Output							*/
-#define SIZE		0x0100		/* Size of Words (16/8* Bits)						*/
-#define LSBF		0x0200		/* LSB First										*/
-#define CPHA		0x0400		/* Clock Phase										*/
-#define CPOL		0x0800		/* Clock Polarity									*/
-#define MSTR		0x1000		/* Master/Slave*									*/
-#define WOM			0x2000		/* Write Open Drain Master							*/
-#define SPE			0x4000		/* SPI Enable										*/
-
-/* SPI_FLG Masks																	*/
-#define FLS1		0x0002		/* Enables SPI_FLOUT1 as SPI Slave-Select Output	*/
-#define FLS2		0x0004		/* Enables SPI_FLOUT2 as SPI Slave-Select Output	*/
-#define FLS3		0x0008		/* Enables SPI_FLOUT3 as SPI Slave-Select Output	*/
-#define FLS4		0x0010		/* Enables SPI_FLOUT4 as SPI Slave-Select Output	*/
-#define FLS5		0x0020		/* Enables SPI_FLOUT5 as SPI Slave-Select Output	*/
-#define FLS6		0x0040		/* Enables SPI_FLOUT6 as SPI Slave-Select Output	*/
-#define FLS7		0x0080		/* Enables SPI_FLOUT7 as SPI Slave-Select Output	*/
-#define FLG1		0xFDFF		/* Activates SPI_FLOUT1 							*/
-#define FLG2		0xFBFF		/* Activates SPI_FLOUT2								*/
-#define FLG3		0xF7FF		/* Activates SPI_FLOUT3								*/
-#define FLG4		0xEFFF		/* Activates SPI_FLOUT4								*/
-#define FLG5		0xDFFF		/* Activates SPI_FLOUT5								*/
-#define FLG6		0xBFFF		/* Activates SPI_FLOUT6								*/
-#define FLG7		0x7FFF		/* Activates SPI_FLOUT7								*/
-
-/* SPI_STAT Masks																				*/
-#define SPIF		0x0001		/* SPI Finished (Single-Word Transfer Complete)					*/
-#define MODF		0x0002		/* Mode Fault Error (Another Device Tried To Become Master)		*/
-#define TXE			0x0004		/* Transmission Error (Data Sent With No New Data In TDBR)		*/
-#define TXS			0x0008		/* SPI_TDBR Data Buffer Status (Full/Empty*)					*/
-#define RBSY		0x0010		/* Receive Error (Data Received With RDBR Full)					*/
-#define RXS			0x0020		/* SPI_RDBR Data Buffer Status (Full/Empty*)					*/
-#define TXCOL		0x0040		/* Transmit Collision Error (Corrupt Data May Have Been Sent)	*/
-
-
 /*  ****************  GENERAL PURPOSE TIMER MASKS  **********************/
 /* TIMER_ENABLE Masks													*/
 #define TIMEN0			0x0001		/* Enable Timer 0					*/
@@ -913,88 +868,6 @@
 #define PH6		0x0040
 #define PH7		0x0080
 
-
-/* *******************  SERIAL PORT MASKS  **************************************/
-/* SPORTx_TCR1 Masks															*/
-#define TSPEN		0x0001		/* Transmit Enable								*/
-#define ITCLK		0x0002		/* Internal Transmit Clock Select				*/
-#define DTYPE_NORM	0x0004		/* Data Format Normal							*/
-#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
-#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
-#define TLSBIT		0x0010		/* Transmit Bit Order							*/
-#define ITFS		0x0200		/* Internal Transmit Frame Sync Select			*/
-#define TFSR		0x0400		/* Transmit Frame Sync Required Select			*/
-#define DITFS		0x0800		/* Data-Independent Transmit Frame Sync Select	*/
-#define LTFS		0x1000		/* Low Transmit Frame Sync Select				*/
-#define LATFS		0x2000		/* Late Transmit Frame Sync Select				*/
-#define TCKFE		0x4000		/* Clock Falling Edge Select					*/
-
-/* SPORTx_TCR2 Masks and Macro													*/
-#define SLEN(x)		((x)&0x1F)	/* SPORT TX Word Length (2 - 31)				*/
-#define TXSE		0x0100		/* TX Secondary Enable							*/
-#define TSFSE		0x0200		/* Transmit Stereo Frame Sync Enable			*/
-#define TRFST		0x0400		/* Left/Right Order (1 = Right Channel 1st)		*/
-
-/* SPORTx_RCR1 Masks															*/
-#define RSPEN		0x0001		/* Receive Enable 								*/
-#define IRCLK		0x0002		/* Internal Receive Clock Select 				*/
-#define DTYPE_NORM	0x0004		/* Data Format Normal							*/
-#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
-#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
-#define RLSBIT		0x0010		/* Receive Bit Order							*/
-#define IRFS		0x0200		/* Internal Receive Frame Sync Select 			*/
-#define RFSR		0x0400		/* Receive Frame Sync Required Select 			*/
-#define LRFS		0x1000		/* Low Receive Frame Sync Select 				*/
-#define LARFS		0x2000		/* Late Receive Frame Sync Select 				*/
-#define RCKFE		0x4000		/* Clock Falling Edge Select 					*/
-
-/* SPORTx_RCR2 Masks															*/
-#define SLEN(x)		((x)&0x1F)	/* SPORT RX Word Length (2 - 31)				*/
-#define RXSE		0x0100		/* RX Secondary Enable							*/
-#define RSFSE		0x0200		/* RX Stereo Frame Sync Enable					*/
-#define RRFST		0x0400		/* Right-First Data Order 						*/
-
-/* SPORTx_STAT Masks															*/
-#define RXNE		0x0001		/* Receive FIFO Not Empty Status				*/
-#define RUVF		0x0002		/* Sticky Receive Underflow Status				*/
-#define ROVF		0x0004		/* Sticky Receive Overflow Status				*/
-#define TXF			0x0008		/* Transmit FIFO Full Status					*/
-#define TUVF		0x0010		/* Sticky Transmit Underflow Status				*/
-#define TOVF		0x0020		/* Sticky Transmit Overflow Status				*/
-#define TXHRE		0x0040		/* Transmit Hold Register Empty					*/
-
-/* SPORTx_MCMC1 Macros															*/
-#define SP_WOFF(x)	((x) & 0x3FF) 	/* Multichannel Window Offset Field			*/
-
-/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits						*/
-#define SP_WSIZE(x)	(((((x)>>0x3)-1)&0xF) << 0xC)	/* Multichannel Window Size = (x/8)-1	*/
-
-/* SPORTx_MCMC2 Masks															*/
-#define REC_BYPASS	0x0000		/* Bypass Mode (No Clock Recovery)				*/
-#define REC_2FROM4	0x0002		/* Recover 2 MHz Clock from 4 MHz Clock			*/
-#define REC_8FROM16	0x0003		/* Recover 8 MHz Clock from 16 MHz Clock		*/
-#define MCDTXPE		0x0004 		/* Multichannel DMA Transmit Packing			*/
-#define MCDRXPE		0x0008 		/* Multichannel DMA Receive Packing				*/
-#define MCMEN		0x0010 		/* Multichannel Frame Mode Enable				*/
-#define FSDR		0x0080 		/* Multichannel Frame Sync to Data Relationship	*/
-#define MFD_0		0x0000		/* Multichannel Frame Delay = 0					*/
-#define MFD_1		0x1000		/* Multichannel Frame Delay = 1					*/
-#define MFD_2		0x2000		/* Multichannel Frame Delay = 2					*/
-#define MFD_3		0x3000		/* Multichannel Frame Delay = 3					*/
-#define MFD_4		0x4000		/* Multichannel Frame Delay = 4					*/
-#define MFD_5		0x5000		/* Multichannel Frame Delay = 5					*/
-#define MFD_6		0x6000		/* Multichannel Frame Delay = 6					*/
-#define MFD_7		0x7000		/* Multichannel Frame Delay = 7					*/
-#define MFD_8		0x8000		/* Multichannel Frame Delay = 8					*/
-#define MFD_9		0x9000		/* Multichannel Frame Delay = 9					*/
-#define MFD_10		0xA000		/* Multichannel Frame Delay = 10				*/
-#define MFD_11		0xB000		/* Multichannel Frame Delay = 11				*/
-#define MFD_12		0xC000		/* Multichannel Frame Delay = 12				*/
-#define MFD_13		0xD000		/* Multichannel Frame Delay = 13				*/
-#define MFD_14		0xE000		/* Multichannel Frame Delay = 14				*/
-#define MFD_15		0xF000		/* Multichannel Frame Delay = 15				*/
-
-
 /* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
 /* EBIU_AMGCTL Masks																	*/
 #define AMCKEN			0x0001		/* Enable CLKOUT									*/
@@ -1319,7 +1192,7 @@
 #define	TWI_ENA		0x0080		/* TWI Enable									*/
 #define	SCCB		0x0200		/* SCCB Compatibility Enable					*/
 
-/* TWI_SLAVE_CTRL Masks															*/
+/* TWI_SLAVE_CTL Masks															*/
 #define	SEN			0x0001		/* Slave Enable									*/
 #define	SADD_LEN	0x0002		/* Slave Address Length							*/
 #define	STDVAL		0x0004		/* Slave Transmit Data Valid					*/
@@ -1330,7 +1203,7 @@
 #define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*)	*/
 #define GCALL		0x0002		/* General Call Indicator						*/
 
-/* TWI_MASTER_CTRL Masks													*/
+/* TWI_MASTER_CTL Masks													*/
 #define	MEN			0x0001		/* Master Mode Enable						*/
 #define	MADD_LEN	0x0002		/* Master Address Length					*/
 #define	MDIR		0x0004		/* Master Transmit Direction (RX/TX*)		*/
@@ -1576,114 +1449,6 @@
 
 #define             HOST_COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
 
-/* Bit masks for CNT_CONFIG */
-
-#define                      CNTE  0x1        /* Counter Enable */
-#define                     nCNTE  0x0
-#define                      DEBE  0x2        /* Debounce Enable */
-#define                     nDEBE  0x0
-#define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                   nCDGINV  0x0
-#define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                   nCUDINV  0x0
-#define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   nCZMINV  0x0
-#define                   CNTMODE  0x700      /* Counter Operating Mode */
-#define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                     nZMZC  0x0
-#define                   BNDMODE  0x3000     /* Boundary register Mode */
-#define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-#define                   nINPDIS  0x0
-
-/* Bit masks for CNT_IMASK */
-
-#define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                     nICIE  0x0
-#define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                     nUCIE  0x0
-#define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                     nDCIE  0x0
-#define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                   nMINCIE  0x0
-#define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   nMAXCIE  0x0
-#define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                  nCOV31IE  0x0
-#define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                  nCOV15IE  0x0
-#define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                  nCZEROIE  0x0
-#define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    nCZMIE  0x0
-#define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                   nCZMEIE  0x0
-#define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-#define                   nCZMZIE  0x0
-
-/* Bit masks for CNT_STATUS */
-
-#define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                     nICII  0x0
-#define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                     nUCII  0x0
-#define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                     nDCII  0x0
-#define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                   nMINCII  0x0
-#define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   nMAXCII  0x0
-#define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                  nCOV31II  0x0
-#define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                  nCOV15II  0x0
-#define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                  nCZEROII  0x0
-#define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    nCZMII  0x0
-#define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                   nCZMEII  0x0
-#define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-#define                   nCZMZII  0x0
-
-/* Bit masks for CNT_COMMAND */
-
-#define                    W1LCNT  0xf        /* Load Counter Register */
-#define                    W1LMIN  0xf0       /* Load Min Register */
-#define                    W1LMAX  0xf00      /* Load Max Register */
-#define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-#define                 nW1ZMONCE  0x0
-
-/* Bit masks for CNT_DEBOUNCE */
-
-#define                 DPRESCALE  0xf        /* Load Counter Register */
-
-/* CNT_COMMAND bit field options */
-
-#define W1LCNT_ZERO   0x0001   /* write 1 to load CNT_COUNTER with zero */
-#define W1LCNT_MIN    0x0004   /* write 1 to load CNT_COUNTER from CNT_MIN */
-#define W1LCNT_MAX    0x0008   /* write 1 to load CNT_COUNTER from CNT_MAX */
-
-#define W1LMIN_ZERO   0x0010   /* write 1 to load CNT_MIN with zero */
-#define W1LMIN_CNT    0x0020   /* write 1 to load CNT_MIN from CNT_COUNTER */
-#define W1LMIN_MAX    0x0080   /* write 1 to load CNT_MIN from CNT_MAX */
-
-#define W1LMAX_ZERO   0x0100   /* write 1 to load CNT_MAX with zero */
-#define W1LMAX_CNT    0x0200   /* write 1 to load CNT_MAX from CNT_COUNTER */
-#define W1LMAX_MIN    0x0400   /* write 1 to load CNT_MAX from CNT_MIN */
-
-/* CNT_CONFIG bit field options */
-
-#define CNTMODE_QUADENC  0x0000  /* quadrature encoder mode */
-#define CNTMODE_BINENC   0x0100  /* binary encoder mode */
-#define CNTMODE_UDCNT    0x0200  /* up/down counter mode */
-#define CNTMODE_DIRCNT   0x0400  /* direction counter mode */
-#define CNTMODE_DIRTMR   0x0500  /* direction timer mode */
-
-#define BNDMODE_COMP     0x0000  /* boundary compare mode */
-#define BNDMODE_ZERO     0x1000  /* boundary compare and zero mode */
-#define BNDMODE_CAPT     0x2000  /* boundary capture mode */
-#define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
-
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
diff --git a/arch/blackfin/mach-bf518/include/mach/gpio.h b/arch/blackfin/mach-bf518/include/mach/gpio.h
index bbab2d76499c..9af6ce0f6321 100644
--- a/arch/blackfin/mach-bf518/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf518/include/mach/gpio.h
@@ -7,48 +7,49 @@
 #ifndef _MACH_GPIO_H_
 #define _MACH_GPIO_H_
 
-#define MAX_BLACKFIN_GPIOS 40
+#define MAX_BLACKFIN_GPIOS 41
 
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PG0	16
-#define	GPIO_PG1	17
-#define	GPIO_PG2	18
-#define	GPIO_PG3	19
-#define	GPIO_PG4	20
-#define	GPIO_PG5	21
-#define	GPIO_PG6	22
-#define	GPIO_PG7	23
-#define	GPIO_PG8	24
-#define	GPIO_PG9	25
-#define	GPIO_PG10      	26
-#define	GPIO_PG11      	27
-#define	GPIO_PG12      	28
-#define	GPIO_PG13      	29
-#define	GPIO_PG14      	30
-#define	GPIO_PG15      	31
-#define	GPIO_PH0	32
-#define	GPIO_PH1	33
-#define	GPIO_PH2	34
-#define	GPIO_PH3	35
-#define	GPIO_PH4	36
-#define	GPIO_PH5	37
-#define	GPIO_PH6	38
-#define	GPIO_PH7	39
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PG0	16
+#define GPIO_PG1	17
+#define GPIO_PG2	18
+#define GPIO_PG3	19
+#define GPIO_PG4	20
+#define GPIO_PG5	21
+#define GPIO_PG6	22
+#define GPIO_PG7	23
+#define GPIO_PG8	24
+#define GPIO_PG9	25
+#define GPIO_PG10	26
+#define GPIO_PG11	27
+#define GPIO_PG12	28
+#define GPIO_PG13	29
+#define GPIO_PG14	30
+#define GPIO_PG15	31
+#define GPIO_PH0	32
+#define GPIO_PH1	33
+#define GPIO_PH2	34
+#define GPIO_PH3	35
+#define GPIO_PH4	36
+#define GPIO_PH5	37
+#define GPIO_PH6	38
+#define GPIO_PH7	39
+#define GPIO_PH8	40
 
 #define PORT_F GPIO_PF0
 #define PORT_G GPIO_PG0
diff --git a/arch/blackfin/mach-bf518/include/mach/pll.h b/arch/blackfin/mach-bf518/include/mach/pll.h
new file mode 100644
index 000000000000..d5502988896b
--- /dev/null
+++ b/arch/blackfin/mach-bf518/include/mach/pll.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PLL_H
+#define _MACH_PLL_H
+
+#include <asm/blackfin.h>
+#include <asm/irqflags.h>
+
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	hard_local_irq_restore(flags);
+}
+
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	hard_local_irq_restore(flags);
+}
+
+#endif /* _MACH_PLL_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h
index e352910f7f99..cd84a569b04e 100644
--- a/arch/blackfin/mach-bf518/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf518/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
 
 /* EMAC MII/RMII Port Mux */
 #define P_MII0_ETxD2	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
@@ -95,7 +95,7 @@
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
 #define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
-#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(2))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2))
 #define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2))
 
 #define P_SPI1_SS	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
@@ -109,6 +109,7 @@
 #define P_SPI1_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
 #define P_SPI1_SSEL5	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
 
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG15
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 /* SPORT Port Mux */
@@ -195,6 +196,6 @@
 #define P_AMS2			(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
 #define P_AMS3			(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2))
 
-#define P_HWAIT			(P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1))
+#define P_HWAIT			(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(1))
 
 #endif				/* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
index 1f8cbe9d6b9a..0ba54701af0b 100644
--- a/arch/blackfin/mach-bf527/Kconfig
+++ b/arch/blackfin/mach-bf527/Kconfig
@@ -79,6 +79,72 @@ config BF527_NAND_D_PORTH
 	  PORT H
 endchoice
 
+comment "Hysteresis/Schmitt Trigger Control"
+config BFIN_HYSTERESIS_CONTROL
+	bool "Enable Hysteresis Control"
+	help
+	  The ADSP-BF52x allows to control input hysteresis for Port F,
+	  Port G and Port H and other processor signal inputs.
+	  The Schmitt trigger enables can be set only for pin groups.
+	  Saying Y will overwrite the default reset or boot loader
+	  initialization.
+
+menu "PORT F"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTF_0_7
+	bool "Enable Hysteresis on PORTF {0...7}"
+config GPIO_HYST_PORTF_8_9
+	bool "Enable Hysteresis on PORTF {8, 9}"
+config GPIO_HYST_PORTF_10
+	bool "Enable Hysteresis on PORTF 10"
+config GPIO_HYST_PORTF_11
+	bool "Enable Hysteresis on PORTF 11"
+config GPIO_HYST_PORTF_12_13
+	bool "Enable Hysteresis on PORTF {12, 13}"
+config GPIO_HYST_PORTF_14_15
+	bool "Enable Hysteresis on PORTF {14, 15}"
+endmenu
+
+menu "PORT G"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTG_0
+	bool "Enable Hysteresis on PORTG 0"
+config GPIO_HYST_PORTG_1_4
+	bool "Enable Hysteresis on PORTG {1...4}"
+config GPIO_HYST_PORTG_5_6
+	bool "Enable Hysteresis on PORTG {5, 6}"
+config GPIO_HYST_PORTG_7_8
+	bool "Enable Hysteresis on PORTG {7, 8}"
+config GPIO_HYST_PORTG_9
+	bool "Enable Hysteresis on PORTG 9"
+config GPIO_HYST_PORTG_10
+	bool "Enable Hysteresis on PORTG 10"
+config GPIO_HYST_PORTG_11_13
+	bool "Enable Hysteresis on PORTG {11...13}"
+config GPIO_HYST_PORTG_14_15
+	bool "Enable Hysteresis on PORTG {14, 15}"
+endmenu
+
+menu "PORT H"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTH_0_7
+	bool "Enable Hysteresis on PORTH {0...7}"
+config GPIO_HYST_PORTH_8
+	bool "Enable Hysteresis on PORTH 8"
+config GPIO_HYST_PORTH_9_15
+	bool "Enable Hysteresis on PORTH {9...15}"
+endmenu
+
+menu "None-GPIO"
+	depends on BFIN_HYSTERESIS_CONTROL
+config NONEGPIO_HYST_TMR0_FS1_PPICLK
+	bool "Enable Hysteresis on {TMR0, PPI_FS1, PPI_CLK}"
+config NONEGPIO_HYST_NMI_RST_BMODE
+	bool "Enable Hysteresis on {NMI, RESET, BMODE}"
+config NONEGPIO_HYST_JTAG
+	bool "Enable Hysteresis on JTAG"
+endmenu
+
 comment "Interrupt Priority Assignment"
 menu "Priority"
 
diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
index b14c28810a44..1cc2667c10f1 100644
--- a/arch/blackfin/mach-bf527/boards/Kconfig
+++ b/arch/blackfin/mach-bf527/boards/Kconfig
@@ -24,4 +24,14 @@ config BFIN526_EZBRD
 	help
 	  BF526-EZBRD/EZKIT Lite board support.
 
+config BFIN527_AD7160EVAL
+	bool "BF527-AD7160-EVAL"
+	help
+	  BF527-AD7160-EVAL board support.
+
+config BFIN527_TLL6527M
+	bool "The Learning Labs TLL6527M"
+	help
+	  TLL6527M V1.0 platform support
+
 endchoice
diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
index 51a5817c4a90..1d67da9f05ac 100644
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ b/arch/blackfin/mach-bf527/boards/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN527_EZKIT_V2)         += ezkit.o
 obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
 obj-$(CONFIG_BFIN526_EZBRD)            += ezbrd.o
+obj-$(CONFIG_BFIN527_AD7160EVAL)       += ad7160eval.o
+obj-$(CONFIG_BFIN527_TLL6527M)         += tll6527m.o
diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c
new file mode 100644
index 000000000000..fc767ac76381
--- /dev/null
+++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c
@@ -0,0 +1,870 @@
+/*
+ * Copyright 2004-20010 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "ADI BF527-AD7160EVAL";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 8,
+	.dma_channels	= 8,
+	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config		= &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb_hdrc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE)
+static struct resource bf52x_ra158z_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf52x_ra158z_device = {
+	.name		= "bfin-ra158z",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(bf52x_ra158z_resources),
+	.resource	= bf52x_ra158z_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ad7160eval_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ad7160eval_flash_data = {
+	.width      = 2,
+	.parts      = ad7160eval_partitions,
+	.nr_parts   = ARRAY_SIZE(ad7160eval_partitions),
+};
+
+static struct resource ad7160eval_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x203fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ad7160eval_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ad7160eval_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ad7160eval_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "linux kernel(nand)",
+		.offset = 0,
+		.size = 4 * 1024 * 1024,
+	},
+	{
+		.name = "file system(nand)",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = NFC_CTL,
+		.end = NFC_DATA_RD + 2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+	{
+		.modalias = "ad183x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 4,
+		.controller_data = &ad1836_spi_chip_info,
+	},
+#endif
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 30000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = GPIO_PH3 + MAX_CTRL_CS,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PF9,
+		.end = GPIO_PF9,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE)
+#include <linux/input/ad7160.h>
+static const struct ad7160_platform_data bfin_ad7160_ts_info = {
+	.sensor_x_res = 854,
+	.sensor_y_res = 480,
+	.pressure = 100,
+	.filter_coef = 3,
+	.coord_pref = AD7160_ORIG_TOP_LEFT,
+	.first_touch_window = 5,
+	.move_window = 3,
+	.event_cabs = AD7160_EMIT_ABS_MT_TRACKING_ID |
+			AD7160_EMIT_ABS_MT_PRESSURE |
+			AD7160_TRACKING_ID_ASCENDING,
+	.finger_act_ctrl = 0x64,
+	.haptic_effect1_ctrl = AD7160_HAPTIC_SLOT_A(60) |
+				AD7160_HAPTIC_SLOT_A_LVL_HIGH |
+				AD7160_HAPTIC_SLOT_B(60) |
+				AD7160_HAPTIC_SLOT_B_LVL_LOW,
+
+	.haptic_effect2_ctrl = AD7160_HAPTIC_SLOT_A(20) |
+				AD7160_HAPTIC_SLOT_A_LVL_HIGH |
+				AD7160_HAPTIC_SLOT_B(80) |
+				AD7160_HAPTIC_SLOT_B_LVL_LOW |
+				AD7160_HAPTIC_SLOT_C(120) |
+				AD7160_HAPTIC_SLOT_C_LVL_HIGH |
+				AD7160_HAPTIC_SLOT_D(30) |
+				AD7160_HAPTIC_SLOT_D_LVL_LOW,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE)
+	{
+		I2C_BOARD_INFO("ad7160", 0x33),
+		.irq = IRQ_PH1,
+		.platform_data = (void *)&bfin_ad7160_ts_info,
+	},
+#endif
+};
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#include <asm/bfin_rotary.h>
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+	/*.rotary_up_key     = KEY_UP,*/
+	/*.rotary_down_key   = KEY_DOWN,*/
+	.rotary_rel_code   = REL_WHEEL,
+	.rotary_button_key = KEY_ENTER,
+	.debounce	   = 10,	/* 0..17 */
+	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
+};
+
+static struct resource bfin_rotary_resources[] = {
+	{
+		.start = IRQ_CNT,
+		.end = IRQ_CNT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_rotary_device = {
+	.name		= "bfin-rotary",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(bfin_rotary_resources),
+	.resource	= bfin_rotary_resources,
+	.dev		= {
+		.platform_data = &bfin_rotary_data,
+	},
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] = {
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+	&bf5xx_nand_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+	&musb_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE)
+	&bf52x_ra158z_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+	&bfin_rotary_device,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&ad7160eval_flash_device,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
+};
+
+static int __init ad7160eval_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(ad7160eval_init);
+
+static struct platform_device *ad7160eval_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(ad7160eval_early_devices,
+		ARRAY_SIZE(ad7160eval_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+	/* the MAC is stored in OTP memory page 0xDF */
+	u32 ret;
+	u64 otp_mac;
+	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
+
+	ret = otp_read(0xDF, 0x00, &otp_mac);
+	if (!(ret & 0x1)) {
+		char *otp_mac_p = (char *)&otp_mac;
+		for (ret = 0; ret < 6; ++ret)
+			addr[ret] = otp_mac_p[5 - ret];
+	}
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index f392af641657..2c31af7a320a 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -145,7 +145,6 @@ static struct mtd_partition partition_info[] = {
 };
 
 static struct bf5xx_nand_platform bf5xx_nand_platform = {
-	.page_size = NFC_PG_SIZE_256,
 	.data_width = NFC_NWIDTH_8,
 	.partitions = partition_info,
 	.nr_partitions = ARRAY_SIZE(partition_info),
@@ -274,13 +273,35 @@ static struct platform_device dm9000_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 #endif
 
@@ -343,8 +364,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -421,13 +442,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 606eb36b9d6e..9a736a850c5c 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -137,8 +137,12 @@ static struct platform_device ezbrd_flash_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "linux kernel(nand)",
+		.name = "bootloader(nand)",
 		.offset = 0,
+		.size = 0x40000,
+	}, {
+		.name = "linux kernel(nand)",
+		.offset = MTDPART_OFS_APPEND,
 		.size = 4 * 1024 * 1024,
 	},
 	{
@@ -149,7 +153,6 @@ static struct mtd_partition partition_info[] = {
 };
 
 static struct bf5xx_nand_platform bf5xx_nand_platform = {
-	.page_size = NFC_PG_SIZE_256,
 	.data_width = NFC_NWIDTH_8,
 	.partitions = partition_info,
 	.nr_partitions = ARRAY_SIZE(partition_info),
@@ -190,13 +193,35 @@ static struct platform_device rtc_device = {
 
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index a05c967a24cf..9222bc00bbd3 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -222,8 +222,12 @@ static struct platform_device ezkit_flash_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "linux kernel(nand)",
+		.name = "bootloader(nand)",
 		.offset = 0,
+		.size = 0x40000,
+	}, {
+		.name = "linux kernel(nand)",
+		.offset = MTDPART_OFS_APPEND,
 		.size = 4 * 1024 * 1024,
 	},
 	{
@@ -234,7 +238,6 @@ static struct mtd_partition partition_info[] = {
 };
 
 static struct bf5xx_nand_platform bf5xx_nand_platform = {
-	.page_size = NFC_PG_SIZE_256,
 	.data_width = NFC_NWIDTH_8,
 	.partitions = partition_info,
 	.nr_partitions = ARRAY_SIZE(partition_info),
@@ -363,13 +366,35 @@ static struct platform_device dm9000_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 #endif
 
@@ -432,8 +457,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -548,13 +573,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
@@ -884,7 +909,7 @@ static struct adp5520_keys_platform_data adp5520_keys_data = {
 };
 
 	/*
-	 *  ADP5520/5501 Multifuction Device Init Data
+	 *  ADP5520/5501 Multifunction Device Init Data
 	 */
 
 static struct adp5520_platform_data adp5520_pdev_data = {
@@ -930,6 +955,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("ssm2602", 0x1b),
 	},
 #endif
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("ad5252", 0x2f),
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
new file mode 100644
index 000000000000..9ec575729e2c
--- /dev/null
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -0,0 +1,1008 @@
+/* File:	arch/blackfin/mach-bf527/boards/tll6527m.c
+ * Based on:	arch/blackfin/mach-bf527/boards/ezkit.c
+ * Author:	Ashish Gupta
+ *
+ * Copyright: 2010 - The Learning Labs Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/musb.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+#if defined(CONFIG_TOUCHSCREEN_AD7879) \
+	|| defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#include <linux/spi/ad7879.h>
+#define LCD_BACKLIGHT_GPIO 0x40
+/* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for
+ * LCD Backlight Enable
+ */
+#endif
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "TLL6527M";
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 8,
+	.dma_channels	= 8,
+	/*.gpio_vrsel	= GPIO_PG13,*/
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config		= &musb_config,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb_hdrc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#include <asm/bfin-lq035q1.h>
+
+static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
+	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
+	.ppi_mode = USE_RGB565_16_BIT_PPI,
+	.use_bl = 1,
+	.gpio_bl = LCD_BACKLIGHT_GPIO,
+};
+
+static struct resource bfin_lq035q1_resources[] = {
+	{
+		.start = IRQ_PPI_ERROR,
+		.end = IRQ_PPI_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_lq035q1_device = {
+	.name		= "bfin-lq035q1",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
+	.resource	= bfin_lq035q1_resources,
+	.dev		= {
+		.platform_data = &bfin_lq035q1_data,
+	},
+};
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition tll6527m_partitions[] = {
+	{
+		.name       = "bootloader(nor)",
+		.size       = 0xA0000,
+		.offset     = 0,
+	}, {
+		.name       = "linux kernel(nor)",
+		.size       = 0xD00000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "file system(nor)",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data tll6527m_flash_data = {
+	.width      = 2,
+	.parts      = tll6527m_partitions,
+	.nr_parts   = ARRAY_SIZE(tll6527m_partitions),
+};
+
+static unsigned tll6527m_flash_gpios[] = { GPIO_PG11, GPIO_PH11, GPIO_PH12 };
+
+static struct resource tll6527m_flash_resource[] = {
+	{
+		.name  = "cfi_probe",
+		.start = 0x20000000,
+		.end   = 0x201fffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = (unsigned long)tll6527m_flash_gpios,
+		.end   = ARRAY_SIZE(tll6527m_flash_gpios),
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device tll6527m_flash_device = {
+	.name          = "gpio-addr-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &tll6527m_flash_data,
+	},
+	.num_resources = ARRAY_SIZE(tll6527m_flash_resource),
+	.resource      = tll6527m_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE)
+/* An SN74LVC138A 3:8 decoder chip has been used to generate 7 augmented
+ * outputs used as SPI CS lines for all SPI SLAVE devices on TLL6527v1-0.
+ * EXP_GPIO_SPISEL_BASE is the base number for the expanded outputs being
+ * used as SPI CS lines, this should be > MAX_BLACKFIN_GPIOS
+ */
+#include <linux/gpio-decoder.h>
+#define EXP_GPIO_SPISEL_BASE 0x64
+static unsigned gpio_addr_inputs[] = {
+	GPIO_PG1, GPIO_PH9, GPIO_PH10
+};
+
+static struct gpio_decoder_platfrom_data spi_decoded_cs = {
+	.base		= EXP_GPIO_SPISEL_BASE,
+	.input_addrs	= gpio_addr_inputs,
+	.nr_input_addrs = ARRAY_SIZE(gpio_addr_inputs),
+	.default_output	= 0,
+/*	.default_output = (1 << ARRAY_SIZE(gpio_addr_inputs)) - 1 */
+};
+
+static struct platform_device spi_decoded_gpio = {
+	.name	= "gpio-decoder",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &spi_decoded_cs,
+	},
+};
+
+#else
+#define EXP_GPIO_SPISEL_BASE 0x0
+
+#endif
+
+#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#include <linux/input/adxl34x.h>
+static const struct adxl34x_platform_data adxl345_info = {
+	.x_axis_offset = 0,
+	.y_axis_offset = 0,
+	.z_axis_offset = 0,
+	.tap_threshold = 0x31,
+	.tap_duration = 0x10,
+	.tap_latency = 0x60,
+	.tap_window = 0xF0,
+	.tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
+	.act_axis_control = 0xFF,
+	.activity_threshold = 5,
+	.inactivity_threshold = 2,
+	.inactivity_time = 2,
+	.free_fall_threshold = 0x7,
+	.free_fall_time = 0x20,
+	.data_rate = 0x8,
+	.data_range = ADXL_FULL_RES,
+
+	.ev_type = EV_ABS,
+	.ev_code_x = ABS_X,		/* EV_REL */
+	.ev_code_y = ABS_Y,		/* EV_REL */
+	.ev_code_z = ABS_Z,		/* EV_REL */
+
+	.ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
+
+/*	.ev_code_ff = KEY_F,*/		/* EV_KEY */
+	.ev_code_act_inactivity = KEY_A,	/* EV_KEY */
+	.use_int2 = 1,
+	.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
+	.fifo_mode = ADXL_FIFO_STREAM,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
+};
+
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+/*
+ * tll6527m V1.0 does not support native spi slave selects
+ * hence DMA mode will not be useful since the ADC needs
+ * CS to toggle for each sample and cs_change_per_word
+ * seems to be removed from spi_bfin5xx.c
+ */
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7879) \
+	|| defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+static const struct ad7879_platform_data bfin_ad7879_ts_info = {
+	.model			= 7879,	/* Model = AD7879 */
+	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
+	.pressure_max		= 10000,
+	.pressure_min		= 0,
+	.first_conversion_delay = 3,
+				/* wait 512us before do a first conversion */
+	.acquisition_time	= 1,	/* 4us acquisition time per sample */
+	.median			= 2,	/* do 8 measurements */
+	.averaging		= 1,
+				/* take the average of 4 middle samples */
+	.pen_down_acc_interval	= 255,	/* 9.4 ms */
+	.gpio_export		= 1,	/* configure AUX as GPIO output*/
+	.gpio_base		= LCD_BACKLIGHT_GPIO,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) \
+	|| defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
+	.enable_dma	= 0,
+	.bits_per_word	= 8,
+};
+#endif
+
+#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE)
+static struct bfin5xx_spi_chip spi_mcp23s08_sys_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+
+static struct bfin5xx_spi_chip spi_mcp23s08_usr_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+
+#include <linux/spi/mcp23s08.h>
+static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = {
+	.chip[0].is_present = true,
+	.base = 0x30,
+};
+static const struct mcp23s08_platform_data bfin_mcp23s08_usr_gpio_info = {
+	.chip[2].is_present = true,
+	.base = 0x38,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,
+				/* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x04 + MAX_CTRL_CS,
+		/* Can be connected to TLL6527M GPIO connector */
+		/* Either SPI_ADC or M25P80 FLASH can be installed at a time */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC)
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
+	{
+		.modalias = "bfin_spi_adc",
+				/* Name of spi_driver for this device */
+		.max_speed_hz = 10000000,
+				/* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x04 + MAX_CTRL_CS,
+		 /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+/*
+ * TLL6527M V1.0 does not support SD Card at SPI Clock > 10 MHz due to
+ * SPI buffer limitations
+ */
+		.max_speed_hz = 10000000,
+					/* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x05 + MAX_CTRL_CS,
+		.controller_data = &mmc_spi_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) \
+	|| defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+	{
+		.modalias = "ad7879",
+		.platform_data = &bfin_ad7879_ts_info,
+		.irq = IRQ_PH14,
+		.max_speed_hz = 5000000,
+					/* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x07 + MAX_CTRL_CS,
+		.controller_data = &spi_ad7879_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 10000000,
+		/* TLL6527Mv1-0 supports max spi clock (SCK) speed = 10 MHz */
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x03 + MAX_CTRL_CS,
+		.mode = SPI_CPHA | SPI_CPOL,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	{
+		.modalias = "bfin-lq035q1-spi",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x06 + MAX_CTRL_CS,
+		.controller_data = &lq035q1_spi_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE)
+	{
+		.modalias = "mcp23s08",
+		.platform_data = &bfin_mcp23s08_sys_gpio_info,
+		.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x01 + MAX_CTRL_CS,
+		.controller_data = &spi_mcp23s08_sys_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+	{
+		.modalias = "mcp23s08",
+		.platform_data = &bfin_mcp23s08_usr_gpio_info,
+		.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = EXP_GPIO_SPISEL_BASE + 0x02 + MAX_CTRL_CS,
+		.controller_data = &spi_mcp23s08_usr_chip_info,
+		.mode = SPI_CPHA | SPI_CPOL,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS,
+	/* EXP_GPIO_SPISEL_BASE will be > MAX_BLACKFIN_GPIOS */
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI,
+		.end   = IRQ_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+	{
+		.start = UART0_THR,
+		.end = UART0_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART0_ERROR,
+		.end = IRQ_UART0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_TX,
+		.end = CH_UART0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+	P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+	.name = "bfin-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
+	.resource = bfin_uart0_resources,
+	.dev = {
+		.platform_data = &bfin_uart0_peripherals,
+					/* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+	{
+		.start = UART1_THR,
+		.end = UART1_GCTL+2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_UART1_ERROR,
+		.end = IRQ_UART1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_TX,
+		.end = CH_UART1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+	{	/* CTS pin */
+		.start = GPIO_PF9,
+		.end = GPIO_PF9,
+		.flags = IORESOURCE_IO,
+	},
+	{	/* RTS pin */
+		.start = GPIO_PF10,
+		.end = GPIO_PF10,
+		.flags = IORESOURCE_IO,
+	},
+#endif
+};
+
+unsigned short bfin_uart1_peripherals[] = {
+	P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
+	.resource = bfin_uart1_resources,
+	.dev = {
+		.platform_data = &bfin_uart1_peripherals,
+						/* Passed to driver */
+	},
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir1_device = {
+	.name = "bfin_sir",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+	},
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	{
+		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) \
+	|| defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("ad7879", 0x2C),
+		.irq = IRQ_PH14,
+		.platform_data = (void *)&bfin_ad7879_ts_info,
+	},
+#endif
+#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+	{
+		I2C_BOARD_INFO("ssm2602", 0x1b),
+	},
+#endif
+	{
+		I2C_BOARD_INFO("adm1192", 0x2e),
+	},
+
+	{
+		I2C_BOARD_INFO("ltc3576", 0x09),
+	},
+#if defined(CONFIG_INPUT_ADXL34X_I2C) \
+	|| defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ_PH13,
+		.platform_data = (void *)&adxl345_info,
+	},
+#endif
+};
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) \
+	|| defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+static struct resource bfin_sport0_uart_resources[] = {
+	{
+		.start = SPORT0_TCR1,
+		.end = SPORT0_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT0_RX,
+		.end = IRQ_SPORT0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT0_ERROR,
+		.end = IRQ_SPORT0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport0_peripherals[] = {
+	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
+	P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
+};
+
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
+	.resource = bfin_sport0_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport0_peripherals,
+		/* Passed to driver */
+	},
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+static struct resource bfin_sport1_uart_resources[] = {
+	{
+		.start = SPORT1_TCR1,
+		.end = SPORT1_MRCS3+4,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_SPORT1_RX,
+		.end = IRQ_SPORT1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_SPORT1_ERROR,
+		.end = IRQ_SPORT1_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+unsigned short bfin_sport1_peripherals[] = {
+	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
+	P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
+	.resource = bfin_sport1_uart_resources,
+	.dev = {
+		.platform_data = &bfin_sport1_peripherals,
+		/* Passed to driver */
+	},
+};
+#endif
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] = {
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *tll6527m_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+	&musb_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mii_bus,
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+	&bfin_lq035q1_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) \
+	|| defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+	&tll6527m_flash_device,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE)
+	&spi_decoded_gpio,
+#endif
+};
+
+static int __init tll6527m_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+	platform_add_devices(tll6527m_devices, ARRAY_SIZE(tll6527m_devices));
+	spi_register_board_info(bfin_spi_board_info,
+				ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(tll6527m_init);
+
+static struct platform_device *tll6527m_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	&bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	&bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
+#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
+	&bfin_sport0_uart_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
+	&bfin_sport1_uart_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+	printk(KERN_INFO "register early platform devices\n");
+	early_platform_add_devices(tll6527m_early_devices,
+		ARRAY_SIZE(tll6527m_early_devices));
+}
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+	/* the MAC is stored in OTP memory page 0xDF */
+	u32 ret;
+	u64 otp_mac;
+	u32 (*otp_read)(u32 page, u32 flags,
+			u64 *page_content) = (void *)0xEF00001A;
+
+	ret = otp_read(0xDF, 0x00, &otp_mac);
+	if (!(ret & 0x1)) {
+		char *otp_mac_p = (char *)&otp_mac;
+		for (ret = 0; ret < 6; ++ret)
+			addr[ret] = otp_mac_p[5 - ret];
+	}
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 02040df8ec80..9358afa05c90 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -5,13 +5,13 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
- *  - Revision D, 08/14/2009; ADSP-BF526 Blackfin Processor Anomaly List
+ *  - Revision E, 03/15/2010; ADSP-BF526 Blackfin Processor Anomaly List
  *  - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
@@ -41,7 +41,7 @@
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
-#define ANOMALY_05000119 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
+#define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
@@ -168,6 +168,8 @@
 #define ANOMALY_05000431 (1)
 /* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
 #define ANOMALY_05000432 (_ANOMALY_BF526(< 1))
+/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
+#define ANOMALY_05000434 (1)
 /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
 #define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))
 /* Preboot Cannot be Used to Alter the PLL_DIV Register */
@@ -204,10 +206,22 @@
 #define ANOMALY_05000467 (1)
 /* PLL Latches Incorrect Settings During Reset */
 #define ANOMALY_05000469 (1)
+/* Incorrect Default MSEL Value in PLL_CTL */
+#define ANOMALY_05000472 (_ANOMALY_BF526(>= 0))
 /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
 #define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
+#define ANOMALY_05000483 (1)
+/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
+#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, < 3))
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -223,6 +237,7 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
@@ -259,6 +274,5 @@
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
 #define ANOMALY_05000474 (0)
-#define ANOMALY_05000475 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
index ff68c8897087..8ff155b34f64 100644
--- a/arch/blackfin/mach-bf527/include/mach/bf527.h
+++ b/arch/blackfin/mach-bf527/include/mach/bf527.h
@@ -85,6 +85,126 @@
 
 #define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
 
+/**************************** Hysteresis Settings ****************************/
+
+#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
+#ifdef CONFIG_GPIO_HYST_PORTF_0_7
+#define HYST_PORTF_0_7		(1 << 0)
+#else
+#define HYST_PORTF_0_7		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_8_9
+#define HYST_PORTF_8_9		(1 << 2)
+#else
+#define HYST_PORTF_8_9		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_10
+#define HYST_PORTF_10		(1 << 4)
+#else
+#define HYST_PORTF_10		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_11
+#define HYST_PORTF_11		(1 << 6)
+#else
+#define HYST_PORTF_11		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_12_13
+#define HYST_PORTF_12_13	(1 << 8)
+#else
+#define HYST_PORTF_12_13	(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_14_15
+#define HYST_PORTF_14_15	(1 << 10)
+#else
+#define HYST_PORTF_14_15	(0 << 10)
+#endif
+
+#define HYST_PORTF_0_15	(HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \
+		HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTG_0
+#define HYST_PORTG_0		(1 << 0)
+#else
+#define HYST_PORTG_0		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_1_4
+#define HYST_PORTG_1_4		(1 << 2)
+#else
+#define HYST_PORTG_1_4		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_5_6
+#define HYST_PORTG_5_6		(1 << 4)
+#else
+#define HYST_PORTG_5_6		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_7_8
+#define HYST_PORTG_7_8		(1 << 6)
+#else
+#define HYST_PORTG_7_8		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_9
+#define HYST_PORTG_9		(1 << 8)
+#else
+#define HYST_PORTG_9		(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_10
+#define HYST_PORTG_10		(1 << 10)
+#else
+#define HYST_PORTG_10		(0 << 10)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_11_13
+#define HYST_PORTG_11_13	(1 << 12)
+#else
+#define HYST_PORTG_11_13	(0 << 12)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_14_15
+#define HYST_PORTG_14_15	(1 << 14)
+#else
+#define HYST_PORTG_14_15	(0 << 14)
+#endif
+
+#define HYST_PORTG_0_15	(HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \
+		HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \
+		HYST_PORTG_11_13 | HYST_PORTG_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTH_0_7
+#define HYST_PORTH_0_7		(1 << 0)
+#else
+#define HYST_PORTH_0_7		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTH_8
+#define HYST_PORTH_8		(1 << 2)
+#else
+#define HYST_PORTH_8		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTH_9_15
+#define HYST_PORTH_9_15		(1 << 4)
+#else
+#define HYST_PORTH_9_15		(0 << 4)
+#endif
+
+#define HYST_PORTH_0_15	(HYST_PORTH_0_7 | HYST_PORTH_8 | HYST_PORTH_9_15)
+
+#ifdef CONFIG_NONEGPIO_HYST_TMR0_FS1_PPICLK
+#define HYST_TMR0_FS1_PPICLK		(1 << 0)
+#else
+#define HYST_TMR0_FS1_PPICLK		(0 << 0)
+#endif
+#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE
+#define HYST_NMI_RST_BMODE		(1 << 2)
+#else
+#define HYST_NMI_RST_BMODE		(0 << 2)
+#endif
+#ifdef CONFIG_NONEGPIO_HYST_JTAG
+#define HYST_JTAG			(1 << 4)
+#else
+#define HYST_JTAG			(0 << 4)
+#endif
+
+#define HYST_NONEGPIO	(HYST_TMR0_FS1_PPICLK | HYST_NMI_RST_BMODE | HYST_JTAG)
+#define HYST_NONEGPIO_MASK		(0x3F)
+#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */
+
 #ifdef CONFIG_BF527
 #define CPU "BF527"
 #define CPUID 0x27e0
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
index 12f2ad45314e..3048b52bf46a 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -279,14 +279,14 @@
 #define bfin_write_SPORT0_TX(val)		bfin_write32(SPORT0_TX, val)
 #define bfin_read_SPORT0_RX()			bfin_read32(SPORT0_RX)
 #define bfin_write_SPORT0_RX(val)		bfin_write32(SPORT0_RX, val)
-#define bfin_read_SPORT0_TX32()			bfin_read32(SPORT0_TX32)
-#define bfin_write_SPORT0_TX32(val)		bfin_write32(SPORT0_TX32, val)
-#define bfin_read_SPORT0_RX32()			bfin_read32(SPORT0_RX32)
-#define bfin_write_SPORT0_RX32(val)		bfin_write32(SPORT0_RX32, val)
-#define bfin_read_SPORT0_TX16()			bfin_read16(SPORT0_TX16)
-#define bfin_write_SPORT0_TX16(val)		bfin_write16(SPORT0_TX16, val)
-#define bfin_read_SPORT0_RX16()			bfin_read16(SPORT0_RX16)
-#define bfin_write_SPORT0_RX16(val)		bfin_write16(SPORT0_RX16, val)
+#define bfin_read_SPORT0_TX32()			bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX32(val)		bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX32()			bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX32(val)		bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_TX16()			bfin_read16(SPORT0_TX)
+#define bfin_write_SPORT0_TX16(val)		bfin_write16(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX16()			bfin_read16(SPORT0_RX)
+#define bfin_write_SPORT0_RX16(val)		bfin_write16(SPORT0_RX, val)
 #define bfin_read_SPORT0_RCR1()			bfin_read16(SPORT0_RCR1)
 #define bfin_write_SPORT0_RCR1(val)		bfin_write16(SPORT0_RCR1, val)
 #define bfin_read_SPORT0_RCR2()			bfin_read16(SPORT0_RCR2)
@@ -334,14 +334,14 @@
 #define bfin_write_SPORT1_TX(val)		bfin_write32(SPORT1_TX, val)
 #define bfin_read_SPORT1_RX()			bfin_read32(SPORT1_RX)
 #define bfin_write_SPORT1_RX(val)		bfin_write32(SPORT1_RX, val)
-#define bfin_read_SPORT1_TX32()			bfin_read32(SPORT1_TX32)
-#define bfin_write_SPORT1_TX32(val)		bfin_write32(SPORT1_TX32, val)
-#define bfin_read_SPORT1_RX32()			bfin_read32(SPORT1_RX32)
-#define bfin_write_SPORT1_RX32(val)		bfin_write32(SPORT1_RX32, val)
-#define bfin_read_SPORT1_TX16()			bfin_read16(SPORT1_TX16)
-#define bfin_write_SPORT1_TX16(val)		bfin_write16(SPORT1_TX16, val)
-#define bfin_read_SPORT1_RX16()			bfin_read16(SPORT1_RX16)
-#define bfin_write_SPORT1_RX16(val)		bfin_write16(SPORT1_RX16, val)
+#define bfin_read_SPORT1_TX32()			bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX32(val)		bfin_write32(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX32()			bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX32(val)		bfin_write32(SPORT1_RX, val)
+#define bfin_read_SPORT1_TX16()			bfin_read16(SPORT1_TX)
+#define bfin_write_SPORT1_TX16(val)		bfin_write16(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX16()			bfin_read16(SPORT1_RX)
+#define bfin_write_SPORT1_RX16(val)		bfin_write16(SPORT1_RX, val)
 #define bfin_read_SPORT1_RCR1()			bfin_read16(SPORT1_RCR1)
 #define bfin_write_SPORT1_RCR1(val)		bfin_write16(SPORT1_RCR1, val)
 #define bfin_read_SPORT1_RCR2()			bfin_read16(SPORT1_RCR2)
@@ -1110,54 +1110,4 @@
 /* These need to be last due to the cdef/linux inter-dependencies */
 #include <asm/irq.h>
 
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
-	unsigned long flags, iwr0, iwr1;
-
-	if (val == bfin_read_PLL_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr0 = bfin_read32(SIC_IWR0);
-	iwr1 = bfin_read32(SIC_IWR1);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
-	bfin_write32(SIC_IWR1, 0);
-
-	bfin_write16(PLL_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR0, iwr0);
-	bfin_write32(SIC_IWR1, iwr1);
-	local_irq_restore_hw(flags);
-}
-
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
-	unsigned long flags, iwr0, iwr1;
-
-	if (val == bfin_read_VR_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr0 = bfin_read32(SIC_IWR0);
-	iwr1 = bfin_read32(SIC_IWR1);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
-	bfin_write32(SIC_IWR1, 0);
-
-	bfin_write16(VR_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR0, iwr0);
-	bfin_write32(SIC_IWR1, iwr1);
-	local_irq_restore_hw(flags);
-}
-
 #endif /* _CDEF_BF52X_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index 8b18b5359210..09475034c6a1 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -458,22 +458,22 @@
 
 /* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
 #define TWI0_REGBASE			0xFFC01400
-#define TWI_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
-#define TWI_CONTROL			0xFFC01404	/* TWI Control Register						*/
-#define TWI_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
-#define TWI_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
-#define TWI_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
-#define TWI_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
-#define TWI_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
-#define TWI_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
-#define TWI_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
-#define TWI_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
-#define TWI_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
-#define TWI_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
-#define TWI_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
-#define TWI_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
-#define TWI_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
-#define TWI_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
+#define TWI0_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
+#define TWI0_CONTROL			0xFFC01404	/* TWI Control Register						*/
+#define TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
+#define TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
+#define TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
+#define TWI0_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
+#define TWI0_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
+#define TWI0_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
+#define TWI0_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
+#define TWI0_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
+#define TWI0_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
+#define TWI0_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
+#define TWI0_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
+#define TWI0_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
+#define TWI0_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
+#define TWI0_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
 
 
 /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
@@ -749,51 +749,6 @@
 #define FFE			0x20		/* Force Framing Error On Transmit	*/
 
 
-/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  ****************************/
-/* SPI_CTL Masks																	*/
-#define	TIMOD		0x0003		/* Transfer Initiate Mode							*/
-#define RDBR_CORE	0x0000		/* 		RDBR Read Initiates, IRQ When RDBR Full		*/
-#define	TDBR_CORE	0x0001		/* 		TDBR Write Initiates, IRQ When TDBR Empty	*/
-#define RDBR_DMA	0x0002		/* 		DMA Read, DMA Until FIFO Empty				*/
-#define TDBR_DMA	0x0003		/* 		DMA Write, DMA Until FIFO Full				*/
-#define SZ			0x0004		/* Send Zero (When TDBR Empty, Send Zero/Last*)		*/
-#define GM			0x0008		/* Get More (When RDBR Full, Overwrite/Discard*)	*/
-#define PSSE		0x0010		/* Slave-Select Input Enable						*/
-#define EMISO		0x0020		/* Enable MISO As Output							*/
-#define SIZE		0x0100		/* Size of Words (16/8* Bits)						*/
-#define LSBF		0x0200		/* LSB First										*/
-#define CPHA		0x0400		/* Clock Phase										*/
-#define CPOL		0x0800		/* Clock Polarity									*/
-#define MSTR		0x1000		/* Master/Slave*									*/
-#define WOM			0x2000		/* Write Open Drain Master							*/
-#define SPE			0x4000		/* SPI Enable										*/
-
-/* SPI_FLG Masks																	*/
-#define FLS1		0x0002		/* Enables SPI_FLOUT1 as SPI Slave-Select Output	*/
-#define FLS2		0x0004		/* Enables SPI_FLOUT2 as SPI Slave-Select Output	*/
-#define FLS3		0x0008		/* Enables SPI_FLOUT3 as SPI Slave-Select Output	*/
-#define FLS4		0x0010		/* Enables SPI_FLOUT4 as SPI Slave-Select Output	*/
-#define FLS5		0x0020		/* Enables SPI_FLOUT5 as SPI Slave-Select Output	*/
-#define FLS6		0x0040		/* Enables SPI_FLOUT6 as SPI Slave-Select Output	*/
-#define FLS7		0x0080		/* Enables SPI_FLOUT7 as SPI Slave-Select Output	*/
-#define FLG1		0xFDFF		/* Activates SPI_FLOUT1 							*/
-#define FLG2		0xFBFF		/* Activates SPI_FLOUT2								*/
-#define FLG3		0xF7FF		/* Activates SPI_FLOUT3								*/
-#define FLG4		0xEFFF		/* Activates SPI_FLOUT4								*/
-#define FLG5		0xDFFF		/* Activates SPI_FLOUT5								*/
-#define FLG6		0xBFFF		/* Activates SPI_FLOUT6								*/
-#define FLG7		0x7FFF		/* Activates SPI_FLOUT7								*/
-
-/* SPI_STAT Masks																				*/
-#define SPIF		0x0001		/* SPI Finished (Single-Word Transfer Complete)					*/
-#define MODF		0x0002		/* Mode Fault Error (Another Device Tried To Become Master)		*/
-#define TXE			0x0004		/* Transmission Error (Data Sent With No New Data In TDBR)		*/
-#define TXS			0x0008		/* SPI_TDBR Data Buffer Status (Full/Empty*)					*/
-#define RBSY		0x0010		/* Receive Error (Data Received With RDBR Full)					*/
-#define RXS			0x0020		/* SPI_RDBR Data Buffer Status (Full/Empty*)					*/
-#define TXCOL		0x0040		/* Transmit Collision Error (Corrupt Data May Have Been Sent)	*/
-
-
 /*  ****************  GENERAL PURPOSE TIMER MASKS  **********************/
 /* TIMER_ENABLE Masks													*/
 #define TIMEN0			0x0001		/* Enable Timer 0					*/
@@ -922,88 +877,6 @@
 #define PH14	0x4000
 #define PH15	0x8000
 
-
-/* *******************  SERIAL PORT MASKS  **************************************/
-/* SPORTx_TCR1 Masks															*/
-#define TSPEN		0x0001		/* Transmit Enable								*/
-#define ITCLK		0x0002		/* Internal Transmit Clock Select				*/
-#define DTYPE_NORM	0x0004		/* Data Format Normal							*/
-#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
-#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
-#define TLSBIT		0x0010		/* Transmit Bit Order							*/
-#define ITFS		0x0200		/* Internal Transmit Frame Sync Select			*/
-#define TFSR		0x0400		/* Transmit Frame Sync Required Select			*/
-#define DITFS		0x0800		/* Data-Independent Transmit Frame Sync Select	*/
-#define LTFS		0x1000		/* Low Transmit Frame Sync Select				*/
-#define LATFS		0x2000		/* Late Transmit Frame Sync Select				*/
-#define TCKFE		0x4000		/* Clock Falling Edge Select					*/
-
-/* SPORTx_TCR2 Masks and Macro													*/
-#define SLEN(x)		((x)&0x1F)	/* SPORT TX Word Length (2 - 31)				*/
-#define TXSE		0x0100		/* TX Secondary Enable							*/
-#define TSFSE		0x0200		/* Transmit Stereo Frame Sync Enable			*/
-#define TRFST		0x0400		/* Left/Right Order (1 = Right Channel 1st)		*/
-
-/* SPORTx_RCR1 Masks															*/
-#define RSPEN		0x0001		/* Receive Enable 								*/
-#define IRCLK		0x0002		/* Internal Receive Clock Select 				*/
-#define DTYPE_NORM	0x0004		/* Data Format Normal							*/
-#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
-#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
-#define RLSBIT		0x0010		/* Receive Bit Order							*/
-#define IRFS		0x0200		/* Internal Receive Frame Sync Select 			*/
-#define RFSR		0x0400		/* Receive Frame Sync Required Select 			*/
-#define LRFS		0x1000		/* Low Receive Frame Sync Select 				*/
-#define LARFS		0x2000		/* Late Receive Frame Sync Select 				*/
-#define RCKFE		0x4000		/* Clock Falling Edge Select 					*/
-
-/* SPORTx_RCR2 Masks															*/
-#define SLEN(x)		((x)&0x1F)	/* SPORT RX Word Length (2 - 31)				*/
-#define RXSE		0x0100		/* RX Secondary Enable							*/
-#define RSFSE		0x0200		/* RX Stereo Frame Sync Enable					*/
-#define RRFST		0x0400		/* Right-First Data Order 						*/
-
-/* SPORTx_STAT Masks															*/
-#define RXNE		0x0001		/* Receive FIFO Not Empty Status				*/
-#define RUVF		0x0002		/* Sticky Receive Underflow Status				*/
-#define ROVF		0x0004		/* Sticky Receive Overflow Status				*/
-#define TXF			0x0008		/* Transmit FIFO Full Status					*/
-#define TUVF		0x0010		/* Sticky Transmit Underflow Status				*/
-#define TOVF		0x0020		/* Sticky Transmit Overflow Status				*/
-#define TXHRE		0x0040		/* Transmit Hold Register Empty					*/
-
-/* SPORTx_MCMC1 Macros															*/
-#define SP_WOFF(x)	((x) & 0x3FF) 	/* Multichannel Window Offset Field			*/
-
-/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits						*/
-#define SP_WSIZE(x)	(((((x)>>0x3)-1)&0xF) << 0xC)	/* Multichannel Window Size = (x/8)-1	*/
-
-/* SPORTx_MCMC2 Masks															*/
-#define REC_BYPASS	0x0000		/* Bypass Mode (No Clock Recovery)				*/
-#define REC_2FROM4	0x0002		/* Recover 2 MHz Clock from 4 MHz Clock			*/
-#define REC_8FROM16	0x0003		/* Recover 8 MHz Clock from 16 MHz Clock		*/
-#define MCDTXPE		0x0004 		/* Multichannel DMA Transmit Packing			*/
-#define MCDRXPE		0x0008 		/* Multichannel DMA Receive Packing				*/
-#define MCMEN		0x0010 		/* Multichannel Frame Mode Enable				*/
-#define FSDR		0x0080 		/* Multichannel Frame Sync to Data Relationship	*/
-#define MFD_0		0x0000		/* Multichannel Frame Delay = 0					*/
-#define MFD_1		0x1000		/* Multichannel Frame Delay = 1					*/
-#define MFD_2		0x2000		/* Multichannel Frame Delay = 2					*/
-#define MFD_3		0x3000		/* Multichannel Frame Delay = 3					*/
-#define MFD_4		0x4000		/* Multichannel Frame Delay = 4					*/
-#define MFD_5		0x5000		/* Multichannel Frame Delay = 5					*/
-#define MFD_6		0x6000		/* Multichannel Frame Delay = 6					*/
-#define MFD_7		0x7000		/* Multichannel Frame Delay = 7					*/
-#define MFD_8		0x8000		/* Multichannel Frame Delay = 8					*/
-#define MFD_9		0x9000		/* Multichannel Frame Delay = 9					*/
-#define MFD_10		0xA000		/* Multichannel Frame Delay = 10				*/
-#define MFD_11		0xB000		/* Multichannel Frame Delay = 11				*/
-#define MFD_12		0xC000		/* Multichannel Frame Delay = 12				*/
-#define MFD_13		0xD000		/* Multichannel Frame Delay = 13				*/
-#define MFD_14		0xE000		/* Multichannel Frame Delay = 14				*/
-#define MFD_15		0xF000		/* Multichannel Frame Delay = 15				*/
-
-
 /* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
 /* EBIU_AMGCTL Masks																	*/
 #define AMCKEN			0x0001		/* Enable CLKOUT									*/
@@ -1328,7 +1201,7 @@
 #define	TWI_ENA		0x0080		/* TWI Enable									*/
 #define	SCCB		0x0200		/* SCCB Compatibility Enable					*/
 
-/* TWI_SLAVE_CTRL Masks															*/
+/* TWI_SLAVE_CTL Masks															*/
 #define	SEN			0x0001		/* Slave Enable									*/
 #define	SADD_LEN	0x0002		/* Slave Address Length							*/
 #define	STDVAL		0x0004		/* Slave Transmit Data Valid					*/
@@ -1339,7 +1212,7 @@
 #define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*)	*/
 #define GCALL		0x0002		/* General Call Indicator						*/
 
-/* TWI_MASTER_CTRL Masks													*/
+/* TWI_MASTER_CTL Masks													*/
 #define	MEN			0x0001		/* Master Mode Enable						*/
 #define	MADD_LEN	0x0002		/* Master Address Length					*/
 #define	MDIR		0x0004		/* Master Transmit Direction (RX/TX*)		*/
@@ -1589,114 +1462,6 @@
 
 #define             HOST_COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
 
-/* Bit masks for CNT_CONFIG */
-
-#define                      CNTE  0x1        /* Counter Enable */
-#define                     nCNTE  0x0
-#define                      DEBE  0x2        /* Debounce Enable */
-#define                     nDEBE  0x0
-#define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                   nCDGINV  0x0
-#define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                   nCUDINV  0x0
-#define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   nCZMINV  0x0
-#define                   CNTMODE  0x700      /* Counter Operating Mode */
-#define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                     nZMZC  0x0
-#define                   BNDMODE  0x3000     /* Boundary register Mode */
-#define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-#define                   nINPDIS  0x0
-
-/* Bit masks for CNT_IMASK */
-
-#define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                     nICIE  0x0
-#define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                     nUCIE  0x0
-#define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                     nDCIE  0x0
-#define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                   nMINCIE  0x0
-#define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   nMAXCIE  0x0
-#define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                  nCOV31IE  0x0
-#define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                  nCOV15IE  0x0
-#define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                  nCZEROIE  0x0
-#define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    nCZMIE  0x0
-#define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                   nCZMEIE  0x0
-#define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-#define                   nCZMZIE  0x0
-
-/* Bit masks for CNT_STATUS */
-
-#define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                     nICII  0x0
-#define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                     nUCII  0x0
-#define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                     nDCII  0x0
-#define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                   nMINCII  0x0
-#define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   nMAXCII  0x0
-#define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                  nCOV31II  0x0
-#define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                  nCOV15II  0x0
-#define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                  nCZEROII  0x0
-#define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    nCZMII  0x0
-#define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                   nCZMEII  0x0
-#define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-#define                   nCZMZII  0x0
-
-/* Bit masks for CNT_COMMAND */
-
-#define                    W1LCNT  0xf        /* Load Counter Register */
-#define                    W1LMIN  0xf0       /* Load Min Register */
-#define                    W1LMAX  0xf00      /* Load Max Register */
-#define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-#define                 nW1ZMONCE  0x0
-
-/* Bit masks for CNT_DEBOUNCE */
-
-#define                 DPRESCALE  0xf        /* Load Counter Register */
-
-/* CNT_COMMAND bit field options */
-
-#define W1LCNT_ZERO   0x0001   /* write 1 to load CNT_COUNTER with zero */
-#define W1LCNT_MIN    0x0004   /* write 1 to load CNT_COUNTER from CNT_MIN */
-#define W1LCNT_MAX    0x0008   /* write 1 to load CNT_COUNTER from CNT_MAX */
-
-#define W1LMIN_ZERO   0x0010   /* write 1 to load CNT_MIN with zero */
-#define W1LMIN_CNT    0x0020   /* write 1 to load CNT_MIN from CNT_COUNTER */
-#define W1LMIN_MAX    0x0080   /* write 1 to load CNT_MIN from CNT_MAX */
-
-#define W1LMAX_ZERO   0x0100   /* write 1 to load CNT_MAX with zero */
-#define W1LMAX_CNT    0x0200   /* write 1 to load CNT_MAX from CNT_COUNTER */
-#define W1LMAX_MIN    0x0400   /* write 1 to load CNT_MAX from CNT_MIN */
-
-/* CNT_CONFIG bit field options */
-
-#define CNTMODE_QUADENC  0x0000  /* quadrature encoder mode */
-#define CNTMODE_BINENC   0x0100  /* binary encoder mode */
-#define CNTMODE_UDCNT    0x0200  /* up/down counter mode */
-#define CNTMODE_DIRCNT   0x0400  /* direction counter mode */
-#define CNTMODE_DIRTMR   0x0500  /* direction timer mode */
-
-#define BNDMODE_COMP     0x0000  /* boundary compare mode */
-#define BNDMODE_ZERO     0x1000  /* boundary compare and zero mode */
-#define BNDMODE_CAPT     0x2000  /* boundary capture mode */
-#define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
-
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
@@ -1738,85 +1503,4 @@
 #define                   nAFEXIT  0x0
 #define                   SECSTAT  0xe0       /* Secure Status */
 
-/* Bit masks for NFC_CTL */
-
-#define                    WR_DLY  0xf        /* Write Strobe Delay */
-#define                    RD_DLY  0xf0       /* Read Strobe Delay */
-#define                    NWIDTH  0x100      /* NAND Data Width */
-#define                   nNWIDTH  0x0
-#define                   PG_SIZE  0x200      /* Page Size */
-#define                  nPG_SIZE  0x0
-
-/* Bit masks for NFC_STAT */
-
-#define                     NBUSY  0x1        /* Not Busy */
-#define                    nNBUSY  0x0
-#define                   WB_FULL  0x2        /* Write Buffer Full */
-#define                  nWB_FULL  0x0
-#define                PG_WR_STAT  0x4        /* Page Write Pending */
-#define               nPG_WR_STAT  0x0
-#define                PG_RD_STAT  0x8        /* Page Read Pending */
-#define               nPG_RD_STAT  0x0
-#define                  WB_EMPTY  0x10       /* Write Buffer Empty */
-#define                 nWB_EMPTY  0x0
-
-/* Bit masks for NFC_IRQSTAT */
-
-#define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
-#define                 nNBUSYIRQ  0x0
-#define                    WB_OVF  0x2        /* Write Buffer Overflow */
-#define                   nWB_OVF  0x0
-#define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
-#define                  nWB_EDGE  0x0
-#define                    RD_RDY  0x8        /* Read Data Ready */
-#define                   nRD_RDY  0x0
-#define                   WR_DONE  0x10       /* Page Write Done */
-#define                  nWR_DONE  0x0
-
-/* Bit masks for NFC_IRQMASK */
-
-#define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
-#define             nMASK_BUSYIRQ  0x0
-#define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
-#define               nMASK_WBOVF  0x0
-#define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
-#define             nMASK_WBEMPTY  0x0
-#define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
-#define               nMASK_RDRDY  0x0
-#define               MASK_WRDONE  0x10       /* Mask Write Done */
-#define              nMASK_WRDONE  0x0
-
-/* Bit masks for NFC_RST */
-
-#define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
-#define                  nECC_RST  0x0
-
-/* Bit masks for NFC_PGCTL */
-
-#define               PG_RD_START  0x1        /* Page Read Start */
-#define              nPG_RD_START  0x0
-#define               PG_WR_START  0x2        /* Page Write Start */
-#define              nPG_WR_START  0x0
-
-/* Bit masks for NFC_ECC0 */
-
-#define                      ECC0  0x7ff      /* Parity Calculation Result0 */
-
-/* Bit masks for NFC_ECC1 */
-
-#define                      ECC1  0x7ff      /* Parity Calculation Result1 */
-
-/* Bit masks for NFC_ECC2 */
-
-#define                      ECC2  0x7ff      /* Parity Calculation Result2 */
-
-/* Bit masks for NFC_ECC3 */
-
-#define                      ECC3  0x7ff      /* Parity Calculation Result3 */
-
-/* Bit masks for NFC_COUNT */
-
-#define                    ECCCNT  0x3ff      /* Transfer Count */
-
-
 #endif /* _DEF_BF52X_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/gpio.h b/arch/blackfin/mach-bf527/include/mach/gpio.h
index 104bff85290d..f80c2995efdb 100644
--- a/arch/blackfin/mach-bf527/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf527/include/mach/gpio.h
@@ -9,54 +9,54 @@
 
 #define MAX_BLACKFIN_GPIOS 48
 
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PG0	16
-#define	GPIO_PG1	17
-#define	GPIO_PG2	18
-#define	GPIO_PG3	19
-#define	GPIO_PG4	20
-#define	GPIO_PG5	21
-#define	GPIO_PG6	22
-#define	GPIO_PG7	23
-#define	GPIO_PG8	24
-#define	GPIO_PG9	25
-#define	GPIO_PG10      	26
-#define	GPIO_PG11      	27
-#define	GPIO_PG12      	28
-#define	GPIO_PG13      	29
-#define	GPIO_PG14      	30
-#define	GPIO_PG15      	31
-#define	GPIO_PH0	32
-#define	GPIO_PH1	33
-#define	GPIO_PH2	34
-#define	GPIO_PH3	35
-#define	GPIO_PH4	36
-#define	GPIO_PH5	37
-#define	GPIO_PH6	38
-#define	GPIO_PH7	39
-#define	GPIO_PH8	40
-#define	GPIO_PH9	41
-#define	GPIO_PH10      	42
-#define	GPIO_PH11      	43
-#define	GPIO_PH12      	44
-#define	GPIO_PH13      	45
-#define	GPIO_PH14      	46
-#define	GPIO_PH15      	47
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PG0	16
+#define GPIO_PG1	17
+#define GPIO_PG2	18
+#define GPIO_PG3	19
+#define GPIO_PG4	20
+#define GPIO_PG5	21
+#define GPIO_PG6	22
+#define GPIO_PG7	23
+#define GPIO_PG8	24
+#define GPIO_PG9	25
+#define GPIO_PG10	26
+#define GPIO_PG11	27
+#define GPIO_PG12	28
+#define GPIO_PG13	29
+#define GPIO_PG14	30
+#define GPIO_PG15	31
+#define GPIO_PH0	32
+#define GPIO_PH1	33
+#define GPIO_PH2	34
+#define GPIO_PH3	35
+#define GPIO_PH4	36
+#define GPIO_PH5	37
+#define GPIO_PH6	38
+#define GPIO_PH7	39
+#define GPIO_PH8	40
+#define GPIO_PH9	41
+#define GPIO_PH10	42
+#define GPIO_PH11	43
+#define GPIO_PH12	44
+#define GPIO_PH13	45
+#define GPIO_PH14	46
+#define GPIO_PH15	47
 
 #define PORT_F GPIO_PF0
 #define PORT_G GPIO_PG0
diff --git a/arch/blackfin/mach-bf527/include/mach/pll.h b/arch/blackfin/mach-bf527/include/mach/pll.h
new file mode 100644
index 000000000000..24f1d7c02325
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/pll.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PLL_H
+#define _MACH_PLL_H
+
+#include <asm/blackfin.h>
+#include <asm/irqflags.h>
+
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	hard_local_irq_restore(flags);
+}
+
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	hard_local_irq_restore(flags);
+}
+
+#endif /* _MACH_PLL_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h
index d4518b6f4adf..08bae421f5c9 100644
--- a/arch/blackfin/mach-bf527/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf527/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
 
 #define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
 #define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
@@ -79,6 +79,7 @@
 
 #define P_HWAIT		(P_DONTCARE)
 
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG1
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 175371af0692..2ce7b16faee1 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -171,7 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -206,12 +206,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 16,
 		.bus_num = 1,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
@@ -347,6 +347,7 @@ static struct plat_serial8250_port serial8250_platform_data [] = {
 		.membase = (void *)0x20200000,
 		.mapbase = 0x20200000,
 		.irq = IRQ_PF8,
+		.irqflags = IRQF_TRIGGER_HIGH,
 		.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
 		.iotype = UPIO_MEM,
 		.regshift = 1,
@@ -355,6 +356,7 @@ static struct plat_serial8250_port serial8250_platform_data [] = {
 		.membase = (void *)0x20200010,
 		.mapbase = 0x20200010,
 		.irq = IRQ_PF8,
+		.irqflags = IRQF_TRIGGER_HIGH,
 		.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
 		.iotype = UPIO_MEM,
 		.regshift = 1,
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 842b4fa76ea9..20c102285bef 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -25,6 +25,7 @@
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
+#include <mach/fio_flag.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -367,8 +368,8 @@ static struct platform_device bfin_device_gpiokeys = {
 #include <linux/i2c-gpio.h>
 
 static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin		= 8,
-	.scl_pin		= 9,
+	.sda_pin		= GPIO_PF8,
+	.scl_pin		= GPIO_PF9,
 	.sda_is_open_drain	= 0,
 	.scl_is_open_drain	= 0,
 	.udelay			= 40,
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index fdcde61906dc..adbe62a81e25 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -71,7 +71,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -110,12 +110,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
@@ -400,7 +400,7 @@ static struct resource isp1362_hcd_resources[] = {
 	}, {
 		.start = IRQ_PF4,
 		.end = IRQ_PF4,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 739773cb7fc6..a1cb8e7c1010 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -222,7 +222,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -261,12 +261,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
@@ -422,8 +422,8 @@ static struct platform_device bfin_device_gpiokeys = {
 #include <linux/i2c-gpio.h>
 
 static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin		= 1,
-	.scl_pin		= 0,
+	.sda_pin		= GPIO_PF1,
+	.scl_pin		= GPIO_PF0,
 	.sda_is_open_drain	= 0,
 	.scl_is_open_drain	= 0,
 	.udelay			= 40,
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index 7349970db978..5ba4b02a12eb 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -22,6 +22,7 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
+#include <mach/fio_flag.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -231,7 +232,7 @@ static struct resource isp1362_hcd_resources[] = {
 	},{
 		.start = IRQ_PF11,
 		.end   = IRQ_PF11,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index c457eaa60239..b3b1cdea2703 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -24,6 +24,7 @@
 #include <asm/reboot.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
+#include <mach/fio_flag.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
@@ -184,7 +185,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -251,13 +252,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
+		.platform_data = "ad1836", /* only includes chip name for the moment */
 		.controller_data = &ad1836_spi_chip_info,
+		.mode = SPI_MODE_3,
 	},
 #endif
 
@@ -494,8 +497,8 @@ static struct platform_device bfin_device_gpiokeys = {
 #include <linux/i2c-gpio.h>
 
 static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin		= 2,
-	.scl_pin		= 3,
+	.sda_pin		= GPIO_PF2,
+	.scl_pin		= GPIO_PF3,
 	.sda_is_open_drain	= 0,
 	.scl_is_open_drain	= 0,
 	.udelay			= 40,
@@ -533,6 +536,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 	},
 #endif
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("ad5252", 0x2f),
+	},
+#endif
 };
 
 static const unsigned int cclk_vlev_datasheet[] =
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 9b3f7a27714d..78f872187918 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -5,7 +5,7 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
@@ -208,8 +208,14 @@
 #define ANOMALY_05000461 (1)
 /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
 #define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
@@ -358,6 +364,6 @@
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
 #define ANOMALY_05000474 (0)
-#define ANOMALY_05000475 (0)
+#define ANOMALY_05000485 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
index feb2392c43ea..401e524f5321 100644
--- a/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -7,11 +7,6 @@
 #ifndef _CDEF_BF532_H
 #define _CDEF_BF532_H
 
-#include <asm/blackfin.h>
-
-/*include all Core registers and bit definitions*/
-#include "defBF532.h"
-
 /*include core specific register pointer definitions*/
 #include <asm/cdef_LPBlackfin.h>
 
@@ -655,90 +650,4 @@
 /* These need to be last due to the cdef/linux inter-dependencies */
 #include <asm/irq.h>
 
-#if ANOMALY_05000311
-#define BFIN_WRITE_FIO_FLAG(name) \
-static inline void bfin_write_FIO_FLAG_##name(unsigned short val) \
-{ \
-	unsigned long flags; \
-	local_irq_save_hw(flags); \
-	bfin_write16(FIO_FLAG_##name, val); \
-	bfin_read_CHIPID(); \
-	local_irq_restore_hw(flags); \
-}
-BFIN_WRITE_FIO_FLAG(D)
-BFIN_WRITE_FIO_FLAG(C)
-BFIN_WRITE_FIO_FLAG(S)
-BFIN_WRITE_FIO_FLAG(T)
-
-#define BFIN_READ_FIO_FLAG(name) \
-static inline u16 bfin_read_FIO_FLAG_##name(void) \
-{ \
-	unsigned long flags; \
-	u16 ret; \
-	local_irq_save_hw(flags); \
-	ret = bfin_read16(FIO_FLAG_##name); \
-	bfin_read_CHIPID(); \
-	local_irq_restore_hw(flags); \
-	return ret; \
-}
-BFIN_READ_FIO_FLAG(D)
-BFIN_READ_FIO_FLAG(C)
-BFIN_READ_FIO_FLAG(S)
-BFIN_READ_FIO_FLAG(T)
-
-#else
-#define bfin_write_FIO_FLAG_D(val)           bfin_write16(FIO_FLAG_D, val)
-#define bfin_write_FIO_FLAG_C(val)           bfin_write16(FIO_FLAG_C, val)
-#define bfin_write_FIO_FLAG_S(val)           bfin_write16(FIO_FLAG_S, val)
-#define bfin_write_FIO_FLAG_T(val)           bfin_write16(FIO_FLAG_T, val)
-#define bfin_read_FIO_FLAG_T()               bfin_read16(FIO_FLAG_T)
-#define bfin_read_FIO_FLAG_C()               bfin_read16(FIO_FLAG_C)
-#define bfin_read_FIO_FLAG_S()               bfin_read16(FIO_FLAG_S)
-#define bfin_read_FIO_FLAG_D()               bfin_read16(FIO_FLAG_D)
-#endif
-
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
-	unsigned long flags, iwr;
-
-	if (val == bfin_read_PLL_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr = bfin_read32(SIC_IWR);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
-	bfin_write16(PLL_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR, iwr);
-	local_irq_restore_hw(flags);
-}
-
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
-	unsigned long flags, iwr;
-
-	if (val == bfin_read_VR_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr = bfin_read32(SIC_IWR);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
-	bfin_write16(VR_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR, iwr);
-	local_irq_restore_hw(flags);
-}
-
 #endif				/* _CDEF_BF532_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index e9ff491c0953..3adb0b44e597 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -509,98 +509,6 @@
 #define IREN_P	0x01
 #define UCEN_P	0x00
 
-/* **********  SERIAL PORT MASKS  ********************** */
-
-/* SPORTx_TCR1 Masks */
-#define TSPEN    0x0001		/* TX enable  */
-#define ITCLK    0x0002		/* Internal TX Clock Select  */
-#define TDTYPE   0x000C		/* TX Data Formatting Select */
-#define DTYPE_NORM	0x0000		/* Data Format Normal							*/
-#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
-#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
-#define TLSBIT   0x0010		/* TX Bit Order */
-#define ITFS     0x0200		/* Internal TX Frame Sync Select  */
-#define TFSR     0x0400		/* TX Frame Sync Required Select  */
-#define DITFS    0x0800		/* Data Independent TX Frame Sync Select  */
-#define LTFS     0x1000		/* Low TX Frame Sync Select  */
-#define LATFS    0x2000		/* Late TX Frame Sync Select  */
-#define TCKFE    0x4000		/* TX Clock Falling Edge Select  */
-
-/* SPORTx_TCR2 Masks */
-#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \
-    defined(__ADSPBF533__)
-# define SLEN	    0x001F	/*TX Word Length  */
-#else
-# define SLEN(x)		((x)&0x1F)	/* SPORT TX Word Length (2 - 31)				*/
-#endif
-#define TXSE        0x0100	/*TX Secondary Enable */
-#define TSFSE       0x0200	/*TX Stereo Frame Sync Enable */
-#define TRFST       0x0400	/*TX Right-First Data Order  */
-
-/* SPORTx_RCR1 Masks */
-#define RSPEN    0x0001		/* RX enable  */
-#define IRCLK    0x0002		/* Internal RX Clock Select  */
-#define RDTYPE   0x000C		/* RX Data Formatting Select */
-#define DTYPE_NORM	0x0000		/* no companding							*/
-#define DTYPE_ULAW	0x0008		/* Compand Using u-Law							*/
-#define DTYPE_ALAW	0x000C		/* Compand Using A-Law							*/
-#define RLSBIT   0x0010		/* RX Bit Order */
-#define IRFS     0x0200		/* Internal RX Frame Sync Select  */
-#define RFSR     0x0400		/* RX Frame Sync Required Select  */
-#define LRFS     0x1000		/* Low RX Frame Sync Select  */
-#define LARFS    0x2000		/* Late RX Frame Sync Select  */
-#define RCKFE    0x4000		/* RX Clock Falling Edge Select  */
-
-/* SPORTx_RCR2 Masks */
-/* SLEN defined above */
-#define RXSE        0x0100	/*RX Secondary Enable */
-#define RSFSE       0x0200	/*RX Stereo Frame Sync Enable */
-#define RRFST       0x0400	/*Right-First Data Order  */
-
-/*SPORTx_STAT Masks */
-#define RXNE		0x0001	/*RX FIFO Not Empty Status */
-#define RUVF	    	0x0002	/*RX Underflow Status */
-#define ROVF		0x0004	/*RX Overflow Status */
-#define TXF		0x0008	/*TX FIFO Full Status */
-#define TUVF         	0x0010	/*TX Underflow Status */
-#define TOVF         	0x0020	/*TX Overflow Status */
-#define TXHRE        	0x0040	/*TX Hold Register Empty */
-
-/*SPORTx_MCMC1 Masks */
-#define SP_WSIZE		0x0000F000	/*Multichannel Window Size Field */
-#define SP_WOFF		0x000003FF	/*Multichannel Window Offset Field */
-/* SPORTx_MCMC1 Macros															*/
-#define SET_SP_WOFF(x)	((x) & 0x3FF) 	/* Multichannel Window Offset Field			*/
-/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits						*/
-#define SET_SP_WSIZE(x)	(((((x)>>0x3)-1)&0xF) << 0xC)	/* Multichannel Window Size = (x/8)-1	*/
-
-/*SPORTx_MCMC2 Masks */
-#define MCCRM		0x00000003 	/*Multichannel Clock Recovery Mode */
-#define REC_BYPASS	0x0000		/* Bypass Mode (No Clock Recovery)				*/
-#define REC_2FROM4	0x0002		/* Recover 2 MHz Clock from 4 MHz Clock			*/
-#define REC_8FROM16	0x0003		/* Recover 8 MHz Clock from 16 MHz Clock		*/
-#define MCDTXPE		0x00000004 	/*Multichannel DMA Transmit Packing */
-#define MCDRXPE		0x00000008 	/*Multichannel DMA Receive Packing */
-#define MCMEN		0x00000010 	/*Multichannel Frame Mode Enable */
-#define FSDR		0x00000080 	/*Multichannel Frame Sync to Data Relationship */
-#define MFD		0x0000F000 	/*Multichannel Frame Delay    */
-#define MFD_0		0x0000		/* Multichannel Frame Delay = 0					*/
-#define MFD_1		0x1000		/* Multichannel Frame Delay = 1					*/
-#define MFD_2		0x2000		/* Multichannel Frame Delay = 2					*/
-#define MFD_3		0x3000		/* Multichannel Frame Delay = 3					*/
-#define MFD_4		0x4000		/* Multichannel Frame Delay = 4					*/
-#define MFD_5		0x5000		/* Multichannel Frame Delay = 5					*/
-#define MFD_6		0x6000		/* Multichannel Frame Delay = 6					*/
-#define MFD_7		0x7000		/* Multichannel Frame Delay = 7					*/
-#define MFD_8		0x8000		/* Multichannel Frame Delay = 8					*/
-#define MFD_9		0x9000		/* Multichannel Frame Delay = 9					*/
-#define MFD_10		0xA000		/* Multichannel Frame Delay = 10				*/
-#define MFD_11		0xB000		/* Multichannel Frame Delay = 11				*/
-#define MFD_12		0xC000		/* Multichannel Frame Delay = 12				*/
-#define MFD_13		0xD000		/* Multichannel Frame Delay = 13				*/
-#define MFD_14		0xE000		/* Multichannel Frame Delay = 14				*/
-#define MFD_15		0xF000		/* Multichannel Frame Delay = 15				*/
-
 /*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */
 
 /*  PPI_CONTROL Masks         */
@@ -773,76 +681,6 @@
 #define PF14_P        14
 #define PF15_P        15
 
-/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  **************** */
-
-/* SPI_CTL Masks */
-#define TIMOD                  0x00000003	/* Transfer initiation mode and interrupt generation */
-#define RDBR_CORE	0x0000		/* 		RDBR Read Initiates, IRQ When RDBR Full		*/
-#define	TDBR_CORE	0x0001		/* 		TDBR Write Initiates, IRQ When TDBR Empty	*/
-#define RDBR_DMA	0x0002		/* 		DMA Read, DMA Until FIFO Empty				*/
-#define TDBR_DMA	0x0003		/* 		DMA Write, DMA Until FIFO Full				*/
-#define SZ                     0x00000004	/* Send Zero (=0) or last (=1) word when TDBR empty. */
-#define GM                     0x00000008	/* When RDBR full, get more (=1) data or discard (=0) incoming Data */
-#define PSSE                   0x00000010	/* Enable (=1) Slave-Select input for Master. */
-#define EMISO                  0x00000020	/* Enable (=1) MISO pin as an output. */
-#define SIZE                   0x00000100	/* Word length (0 => 8 bits, 1 => 16 bits) */
-#define LSBF                   0x00000200	/* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
-#define CPHA                   0x00000400	/* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
-#define CPOL                   0x00000800	/* Clock polarity (0 => active-high, 1 => active-low) */
-#define MSTR                   0x00001000	/* Configures SPI as master (=1) or slave (=0) */
-#define WOM                    0x00002000	/* Open drain (=1) data output enable (for MOSI and MISO) */
-#define SPE                    0x00004000	/* SPI module enable (=1), disable (=0) */
-
-/* SPI_FLG Masks */
-#define FLS1                   0x00000002	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
-#define FLS2                   0x00000004	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLS3                   0x00000008	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
-#define FLS4                   0x00000010	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
-#define FLS5                   0x00000020	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
-#define FLS6                   0x00000040	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
-#define FLS7                   0x00000080	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
-#define FLG1                   0x00000200	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
-#define FLG2                   0x00000400	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLG3                   0x00000800	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
-#define FLG4                   0x00001000	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
-#define FLG5                   0x00002000	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
-#define FLG6                   0x00004000	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
-#define FLG7                   0x00008000	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
-
-/* SPI_FLG Bit Positions */
-#define FLS1_P                 0x00000001	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
-#define FLS2_P                 0x00000002	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLS3_P                 0x00000003	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
-#define FLS4_P                 0x00000004	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
-#define FLS5_P                 0x00000005	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
-#define FLS6_P                 0x00000006	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
-#define FLS7_P                 0x00000007	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
-#define FLG1_P                 0x00000009	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
-#define FLG2_P                 0x0000000A	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLG3_P                 0x0000000B	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
-#define FLG4_P                 0x0000000C	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
-#define FLG5_P                 0x0000000D	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
-#define FLG6_P                 0x0000000E	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
-#define FLG7_P                 0x0000000F	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
-
-/* SPI_STAT Masks */
-#define SPIF                   0x00000001	/* Set (=1) when SPI single-word transfer complete */
-#define MODF                   0x00000002	/* Set (=1) in a master device when some other device tries to become master */
-#define TXE                    0x00000004	/* Set (=1) when transmission occurs with no new data in SPI_TDBR */
-#define TXS                    0x00000008	/* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
-#define RBSY                   0x00000010	/* Set (=1) when data is received with RDBR full */
-#define RXS                    0x00000020	/* SPI_RDBR Data Buffer Status (0=Empty, 1=Full)  */
-#define TXCOL                  0x00000040	/* When set (=1), corrupt data may have been transmitted  */
-
-/* SPIx_FLG Masks																	*/
-#define FLG1E	0xFDFF		/* Activates SPI_FLOUT1 							*/
-#define FLG2E	0xFBFF		/* Activates SPI_FLOUT2								*/
-#define FLG3E	0xF7FF		/* Activates SPI_FLOUT3								*/
-#define FLG4E	0xEFFF		/* Activates SPI_FLOUT4								*/
-#define FLG5E	0xDFFF		/* Activates SPI_FLOUT5								*/
-#define FLG6E	0xBFFF		/* Activates SPI_FLOUT6								*/
-#define FLG7E	0x7FFF		/* Activates SPI_FLOUT7								*/
-
 /* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */
 
 /* AMGCTL Masks */
diff --git a/arch/blackfin/mach-bf533/include/mach/fio_flag.h b/arch/blackfin/mach-bf533/include/mach/fio_flag.h
new file mode 100644
index 000000000000..d0bfba0b083b
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/fio_flag.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_FIO_FLAG_H
+#define _MACH_FIO_FLAG_H
+
+#include <asm/blackfin.h>
+#include <asm/irqflags.h>
+
+#if ANOMALY_05000311
+#define BFIN_WRITE_FIO_FLAG(name) \
+static inline void bfin_write_FIO_FLAG_##name(unsigned short val) \
+{ \
+	unsigned long flags; \
+	flags = hard_local_irq_save(); \
+	bfin_write16(FIO_FLAG_##name, val); \
+	bfin_read_CHIPID(); \
+	hard_local_irq_restore(flags); \
+}
+BFIN_WRITE_FIO_FLAG(D)
+BFIN_WRITE_FIO_FLAG(C)
+BFIN_WRITE_FIO_FLAG(S)
+BFIN_WRITE_FIO_FLAG(T)
+
+#define BFIN_READ_FIO_FLAG(name) \
+static inline u16 bfin_read_FIO_FLAG_##name(void) \
+{ \
+	unsigned long flags; \
+	u16 ret; \
+	flags = hard_local_irq_save(); \
+	ret = bfin_read16(FIO_FLAG_##name); \
+	bfin_read_CHIPID(); \
+	hard_local_irq_restore(flags); \
+	return ret; \
+}
+BFIN_READ_FIO_FLAG(D)
+BFIN_READ_FIO_FLAG(C)
+BFIN_READ_FIO_FLAG(S)
+BFIN_READ_FIO_FLAG(T)
+
+#else
+#define bfin_write_FIO_FLAG_D(val)           bfin_write16(FIO_FLAG_D, val)
+#define bfin_write_FIO_FLAG_C(val)           bfin_write16(FIO_FLAG_C, val)
+#define bfin_write_FIO_FLAG_S(val)           bfin_write16(FIO_FLAG_S, val)
+#define bfin_write_FIO_FLAG_T(val)           bfin_write16(FIO_FLAG_T, val)
+#define bfin_read_FIO_FLAG_T()               bfin_read16(FIO_FLAG_T)
+#define bfin_read_FIO_FLAG_C()               bfin_read16(FIO_FLAG_C)
+#define bfin_read_FIO_FLAG_S()               bfin_read16(FIO_FLAG_S)
+#define bfin_read_FIO_FLAG_D()               bfin_read16(FIO_FLAG_D)
+#endif
+
+#endif /* _MACH_FIO_FLAG_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h
index 2af19d69a7a7..e02416db4b00 100644
--- a/arch/blackfin/mach-bf533/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf533/include/mach/gpio.h
@@ -9,22 +9,22 @@
 
 #define MAX_BLACKFIN_GPIOS 16
 
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
 
 #define PORT_F GPIO_PF0
 
diff --git a/arch/blackfin/mach-bf533/include/mach/pll.h b/arch/blackfin/mach-bf533/include/mach/pll.h
new file mode 100644
index 000000000000..169c106d0edb
--- /dev/null
+++ b/arch/blackfin/mach-bf533/include/mach/pll.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PLL_H
+#define _MACH_PLL_H
+
+#include <asm/blackfin.h>
+#include <asm/irqflags.h>
+
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr = bfin_read32(SIC_IWR);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR, IWR_ENABLE(0));
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR, iwr);
+	hard_local_irq_restore(flags);
+}
+
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr = bfin_read32(SIC_IWR);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR, IWR_ENABLE(0));
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR, iwr);
+	hard_local_irq_restore(flags);
+}
+
+#endif /* _MACH_PLL_H */
diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h
index 075dae1af164..96f5d9129f20 100644
--- a/arch/blackfin/mach-bf533/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf533/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
 
 #define P_PPI0_CLK	(P_DONTCARE)
 #define P_PPI0_FS1	(P_DONTCARE)
@@ -60,6 +60,7 @@
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #define P_TMR2		(P_DONTCARE)
diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
index d81224f9d723..08b2b343ccec 100644
--- a/arch/blackfin/mach-bf537/Kconfig
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -14,8 +14,8 @@ config IRQ_DMA_ERROR
 	int "IRQ_DMA_ERROR Generic"
 	default 7
 config IRQ_ERROR
-	int "IRQ_ERROR: CAN MAC SPORT0 SPORT1 SPI UART0 UART1"
-	default 7
+	int "IRQ_ERROR: PPI CAN MAC SPORT0 SPORT1 SPI UART0 UART1"
+	default 11
 config IRQ_RTC
 	int "IRQ_RTC"
 	default 8
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index d35fc5fe4c2b..836698c4ee54 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -73,7 +73,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -112,12 +112,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
@@ -229,7 +229,7 @@ static struct resource isp1362_hcd_resources[] = {
 	}, {
 		.start = IRQ_PG15,
 		.end = IRQ_PG15,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
@@ -597,13 +597,35 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index d464ad5b72b2..2a85670273cb 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -113,12 +113,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
@@ -230,7 +230,7 @@ static struct resource isp1362_hcd_resources[] = {
 	}, {
 		.start = IRQ_PG15,
 		.end = IRQ_PG15,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
@@ -562,13 +562,35 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 05d45994480e..49800518412c 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -68,13 +68,35 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 812e8f991601..b95807894e25 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -99,13 +99,35 @@ static struct platform_device smc91x_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_RMII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 #endif
 
@@ -175,8 +197,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -238,13 +260,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9eaf5b05c11e..3aa344ce8e52 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -35,12 +35,10 @@
 #include <asm/reboot.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
-#ifdef CONFIG_REGULATOR_ADP_SWITCH
-#include <linux/regulator/adp_switch.h>
-#endif
-#ifdef CONFIG_REGULATOR_AD5398
-#include <linux/regulator/ad5398.h>
+#ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
+#include <linux/regulator/fixed.h>
 #endif
+#include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/userspace-consumer.h>
 
@@ -264,7 +262,7 @@ static struct resource isp1362_hcd_resources[] = {
 	}, {
 		.start = IRQ_PF3,
 		.end = IRQ_PF3,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
@@ -329,13 +327,35 @@ static struct platform_device bfin_can_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = PHY_POLL, /* IRQ_MAC_PHYINT */
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 #endif
 
@@ -400,6 +420,7 @@ static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
 
 static struct platform_nand_data bfin_plat_nand_data = {
 	.chip = {
+		.nr_chips = 1,
 		.chip_delay = 30,
 #ifdef CONFIG_MTD_PARTITIONS
 		.part_probe_types = part_probes,
@@ -417,7 +438,7 @@ static struct platform_nand_data bfin_plat_nand_data = {
 static struct resource bfin_plat_nand_resources = {
 	.start = 0x20212000,
 	.end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
-	.flags = IORESOURCE_IO,
+	.flags = IORESOURCE_MEM,
 };
 
 static struct platform_device bfin_async_nand_device = {
@@ -544,6 +565,14 @@ static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE)
+static struct bfin5xx_spi_chip adav801_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
 #include <linux/input/ad714x.h>
 static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
@@ -692,6 +721,65 @@ static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
+static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
+static unsigned short ad7816_platform_data[] = {
+	GPIO_PF4, /* rdwr_pin */
+	GPIO_PF5, /* convert_pin */
+	GPIO_PF7, /* busy_pin */
+	0,
+};
+
+static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
+static unsigned long adt7310_platform_data[3] = {
+/* INT bound temperature alarm event. line 1 */
+	IRQ_PG4, IRQF_TRIGGER_LOW,
+/* CT bound temperature alarm event irq_flags. line 0 */
+	IRQF_TRIGGER_LOW,
+};
+
+static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
+static unsigned short ad7298_platform_data[] = {
+	GPIO_PF7, /* busy_pin */
+	0,
+};
+
+static struct bfin5xx_spi_chip ad7298_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
+static unsigned long adt7316_spi_data[2] = {
+	IRQF_TRIGGER_LOW, /* interrupt flags */
+	GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
+};
+
+static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 
@@ -823,14 +911,12 @@ static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
 	.enable_dma	= 1,
 	.bits_per_word	= 8,
-	.cs_gpio = GPIO_PF10,
 };
 #endif
 
 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
 static struct bfin5xx_spi_chip adf7021_spi_chip_info = {
 	.bits_per_word = 16,
-	.cs_gpio = GPIO_PF10,
 };
 
 #include <linux/spi/adf702x.h>
@@ -937,6 +1023,13 @@ static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE)
+static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -981,7 +1074,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+		.chip_select = 4,
 		.platform_data = "ad1836", /* only includes chip name for the moment */
 		.controller_data = &ad1836_spi_chip_info,
 		.mode = SPI_MODE_3,
@@ -999,6 +1092,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
+#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) || defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE)
+	{
+		.modalias = "adav80x",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &adav801_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
 	{
 		.modalias = "ad714x_captouch",
@@ -1017,6 +1121,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.modalias = "ad2s90",
 		.bus_num = 0,
 		.chip_select = 3,            /* change it for your board */
+		.mode = SPI_MODE_3,
 		.platform_data = NULL,
 		.controller_data = &ad2s90_spi_chip_info,
 	},
@@ -1043,6 +1148,67 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
+#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
+	{
+		.modalias = "ad7314",
+		.max_speed_hz = 1000000,
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.controller_data = &ad7314_spi_chip_info,
+		.mode = SPI_MODE_1,
+	},
+#endif
+
+#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
+	{
+		.modalias = "ad7818",
+		.max_speed_hz = 1000000,
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.platform_data = ad7816_platform_data,
+		.controller_data = &ad7816_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
+	{
+		.modalias = "adt7310",
+		.max_speed_hz = 1000000,
+		.irq = IRQ_PG5,		/* CT alarm event. Line 0 */
+		.bus_num = 0,
+		.chip_select = 4,	/* CS, change it for your board */
+		.platform_data = adt7310_platform_data,
+		.controller_data = &adt7310_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
+	{
+		.modalias = "ad7298",
+		.max_speed_hz = 1000000,
+		.bus_num = 0,
+		.chip_select = 4,            /* CS, change it for your board */
+		.platform_data = ad7298_platform_data,
+		.controller_data = &ad7298_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
+	{
+		.modalias = "adt7316",
+		.max_speed_hz = 1000000,
+		.irq = IRQ_PG5,		/* interrupt line */
+		.bus_num = 0,
+		.chip_select = 4,	/* CS, change it for your board */
+		.platform_data = adt7316_spi_data,
+		.controller_data = &adt7316_spi_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
@@ -1102,7 +1268,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.irq = IRQ_PF6,
 		.bus_num = 0,
-		.chip_select = 0,	/* GPIO controlled SSEL */
+		.chip_select = GPIO_PF10 + MAX_CTRL_CS,	/* GPIO controlled SSEL */
 		.controller_data = &enc28j60_spi_chip_info,
 		.mode = SPI_MODE_0,
 	},
@@ -1124,7 +1290,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.modalias = "adf702x",
 		.max_speed_hz = 16000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,	/* GPIO controlled SSEL */
+		.chip_select = GPIO_PF10 + MAX_CTRL_CS,	/* GPIO controlled SSEL */
 		.controller_data = &adf7021_spi_chip_info,
 		.platform_data = &adf7021_platform_data,
 		.mode = SPI_MODE_0,
@@ -1142,12 +1308,239 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_0,
 	},
 #endif
+#if defined(CONFIG_AD7476) \
+	|| defined(CONFIG_AD7476_MODULE)
+	{
+		.modalias = "ad7476", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_ad7476_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_ADE7753) \
+	|| defined(CONFIG_ADE7753_MODULE)
+	{
+		.modalias = "ade7753",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_1,
+	},
+#endif
+#if defined(CONFIG_ADE7754) \
+	|| defined(CONFIG_ADE7754_MODULE)
+	{
+		.modalias = "ade7754",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_1,
+	},
+#endif
+#if defined(CONFIG_ADE7758) \
+	|| defined(CONFIG_ADE7758_MODULE)
+	{
+		.modalias = "ade7758",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_1,
+	},
+#endif
+#if defined(CONFIG_ADE7759) \
+	|| defined(CONFIG_ADE7759_MODULE)
+	{
+		.modalias = "ade7759",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_1,
+	},
+#endif
+#if defined(CONFIG_ADE7854_SPI) \
+	|| defined(CONFIG_ADE7854_SPI_MODULE)
+	{
+		.modalias = "ade7854",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_ADIS16060) \
+	|| defined(CONFIG_ADIS16060_MODULE)
+	{
+		.modalias = "adis16060_r",
+		.max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_0,
+	},
+	{
+		.modalias = "adis16060_w",
+		.max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 2, /* CS for write, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_1,
+	},
+#endif
+#if defined(CONFIG_ADIS16130) \
+	|| defined(CONFIG_ADIS16130_MODULE)
+	{
+		.modalias = "adis16130",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS for read, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_ADIS16201) \
+	|| defined(CONFIG_ADIS16201_MODULE)
+	{
+		.modalias = "adis16201",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if defined(CONFIG_ADIS16203) \
+	|| defined(CONFIG_ADIS16203_MODULE)
+	{
+		.modalias = "adis16203",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if defined(CONFIG_ADIS16204) \
+	|| defined(CONFIG_ADIS16204_MODULE)
+	{
+		.modalias = "adis16204",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if defined(CONFIG_ADIS16209) \
+	|| defined(CONFIG_ADIS16209_MODULE)
+	{
+		.modalias = "adis16209",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if defined(CONFIG_ADIS16220) \
+	|| defined(CONFIG_ADIS16220_MODULE)
+	{
+		.modalias = "adis16220",
+		.max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if defined(CONFIG_ADIS16240) \
+	|| defined(CONFIG_ADIS16240_MODULE)
+	{
+		.modalias = "adis16240",
+		.max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if defined(CONFIG_ADIS16260) \
+	|| defined(CONFIG_ADIS16260_MODULE)
+	{
+		.modalias = "adis16260",
+		.max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if defined(CONFIG_ADIS16261) \
+	|| defined(CONFIG_ADIS16261_MODULE)
+	{
+		.modalias = "adis16261",
+		.max_speed_hz = 2500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_ADIS16300) \
+	|| defined(CONFIG_ADIS16300_MODULE)
+	{
+		.modalias = "adis16300",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if defined(CONFIG_ADIS16350) \
+	|| defined(CONFIG_ADIS16350_MODULE)
+	{
+		.modalias = "adis16364",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 5, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+		.irq = IRQ_PF4,
+	},
+#endif
+#if defined(CONFIG_ADIS16400) \
+	|| defined(CONFIG_ADIS16400_MODULE)
+	{
+		.modalias = "adis16400",
+		.max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1, /* CS, change it for your board */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.mode = SPI_MODE_3,
+	},
+#endif
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* SPI controller data */
 static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 8,
+	.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
@@ -1644,7 +2037,7 @@ static struct adp5520_keys_platform_data adp5520_keys_data = {
 };
 
 	/*
-	 *  ADP5520/5501 Multifuction Device Init Data
+	 *  ADP5520/5501 Multifunction Device Init Data
 	 */
 
 static struct adp5520_platform_data adp5520_pdev_data = {
@@ -1772,12 +2165,6 @@ static struct regulator_init_data ad5398_regulator_data = {
 	.consumer_supplies     = &ad5398_consumer,
 };
 
-static struct ad5398_platform_data ad5398_i2c_platform_data = {
-	.current_bits = 10,
-	.current_offset = 4,
-	.regulator_data = &ad5398_regulator_data,
-};
-
 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
 	defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
 static struct platform_device ad5398_virt_consumer_device = {
@@ -1810,7 +2197,34 @@ static struct platform_device ad5398_userspace_consumer_device = {
 #endif
 #endif
 
+#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
+/* INT bound temperature alarm event. line 1 */
+static unsigned long adt7410_platform_data[2] = {
+	IRQ_PG4, IRQF_TRIGGER_LOW,
+};
+#endif
+
+#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
+/* INT bound temperature alarm event. line 1 */
+static unsigned long adt7316_i2c_data[2] = {
+	IRQF_TRIGGER_LOW, /* interrupt flags */
+	GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
+};
+#endif
+
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
+	{
+		I2C_BOARD_INFO("ad1937", 0x04),
+	},
+#endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) || defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE)
+	{
+		I2C_BOARD_INFO("adav803", 0x10),
+	},
+#endif
+
 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
 	{
 		I2C_BOARD_INFO("ad7142_captouch", 0x2C),
@@ -1842,12 +2256,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("ad7414", 0x9),
 		.irq = IRQ_PG5,
-		/*
-		 * platform_data pointer is borrwoed by the driver to
-		 * store custimer defined IRQ ALART level mode.
-		 * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
-		 */
-		.platform_data = (void *)IRQF_TRIGGER_LOW,
+		.irq_flags = IRQF_TRIGGER_LOW,
 	},
 #endif
 
@@ -1855,12 +2264,56 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("ad7417", 0xb),
 		.irq = IRQ_PG5,
-		/*
-		 * platform_data pointer is borrwoed by the driver to
-		 * store custimer defined IRQ ALART level mode.
-		 * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
-		 */
-		.platform_data = (void *)IRQF_TRIGGER_LOW,
+		.irq_flags = IRQF_TRIGGER_LOW,
+		.platform_data = (void *)GPIO_PF4,
+	},
+#endif
+
+#if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("ade7854", 0x38),
+	},
+#endif
+
+#if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
+	{
+		I2C_BOARD_INFO("adt75", 0x9),
+		.irq = IRQ_PG5,
+		.irq_flags = IRQF_TRIGGER_LOW,
+	},
+#endif
+
+#if defined(CONFIG_ADT7408) || defined(CONFIG_ADT7408_MODULE)
+	{
+		I2C_BOARD_INFO("adt7408", 0x18),
+		.irq = IRQ_PG5,
+		.irq_flags = IRQF_TRIGGER_LOW,
+	},
+#endif
+
+#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
+	{
+		I2C_BOARD_INFO("adt7410", 0x48),
+		/* CT critical temperature event. line 0 */
+		.irq = IRQ_PG5,
+		.irq_flags = IRQF_TRIGGER_LOW,
+		.platform_data = (void *)&adt7410_platform_data,
+	},
+#endif
+
+#if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE)
+	{
+		I2C_BOARD_INFO("ad7291", 0x20),
+		.irq = IRQ_PG5,
+		.irq_flags = IRQF_TRIGGER_LOW,
+	},
+#endif
+
+#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
+	{
+		I2C_BOARD_INFO("adt7316", 0x48),
+		.irq = IRQ_PG6,
+		.platform_data = (void *)&adt7316_i2c_data,
 	},
 #endif
 
@@ -1916,7 +2369,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #endif
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
 	{
-		I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2C),
+		I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
 	},
 #endif
 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
@@ -1953,7 +2406,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
 	{
 		I2C_BOARD_INFO("ad5398", 0xC),
-		.platform_data = (void *)&ad5398_i2c_platform_data,
+		.platform_data = (void *)&ad5398_regulator_data,
 	},
 #endif
 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
@@ -1962,6 +2415,16 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.platform_data = (void *)&adp8860_pdata,
 	},
 #endif
+#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
+	{
+		I2C_BOARD_INFO("adau1373", 0x1A),
+	},
+#endif
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("ad5252", 0x2e),
+	},
+#endif
 };
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -2146,50 +2609,38 @@ static struct platform_device bfin_ac97 = {
 };
 #endif
 
-#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
-#define REGULATOR_ADP122        "adp122"
-#define REGULATOR_ADP150        "adp150"
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+#define REGULATOR_ADP122	"adp122"
+#define REGULATOR_ADP122_UV	2500000
 
 static struct regulator_consumer_supply adp122_consumers = {
 		.supply = REGULATOR_ADP122,
 };
 
-static struct regulator_consumer_supply adp150_consumers = {
-		.supply = REGULATOR_ADP150,
-};
-
-static struct regulator_init_data adp_switch_regulator_data[] = {
-	{
-		.constraints = {
-			.name = REGULATOR_ADP122,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.min_uA = 0,
-			.max_uA = 300000,
-		},
-		.num_consumer_supplies = 1,	/* only 1 */
-		.consumer_supplies     = &adp122_consumers,
-		.driver_data	       = (void *)GPIO_PF2, /* gpio port only */
-	},
-	{
-		.constraints = {
-			.name = REGULATOR_ADP150,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.min_uA = 0,
-			.max_uA = 150000,
-		},
-		.num_consumer_supplies = 1,	/* only 1 */
-		.consumer_supplies     = &adp150_consumers,
-		.driver_data	       = (void *)GPIO_PF3, /* gpio port only */
+static struct regulator_init_data adp_switch_regulator_data = {
+	.constraints = {
+		.name = REGULATOR_ADP122,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		.min_uV = REGULATOR_ADP122_UV,
+		.max_uV = REGULATOR_ADP122_UV,
+		.min_uA = 0,
+		.max_uA = 300000,
 	},
+	.num_consumer_supplies = 1,	/* only 1 */
+	.consumer_supplies     = &adp122_consumers,
 };
 
-static struct adp_switch_platform_data adp_switch_pdata = {
-	.regulator_num = ARRAY_SIZE(adp_switch_regulator_data),
-	.regulator_data = adp_switch_regulator_data,
+static struct fixed_voltage_config adp_switch_pdata = {
+	.supply_name = REGULATOR_ADP122,
+	.microvolts = REGULATOR_ADP122_UV,
+	.gpio = GPIO_PF2,
+	.enable_high = 1,
+	.enabled_at_boot = 0,
+	.init_data = &adp_switch_regulator_data,
 };
 
 static struct platform_device adp_switch_device = {
-	.name = "adp_switch",
+	.name = "reg-fixed-voltage",
 	.id = 0,
 	.dev = {
 		.platform_data = &adp_switch_pdata,
@@ -2215,27 +2666,26 @@ static struct platform_device adp122_userspace_consumer_device = {
 		.platform_data = &adp122_userspace_comsumer_data,
 	},
 };
+#endif
+#endif
 
-static struct regulator_bulk_data adp150_bulk_data = {
-	.supply = REGULATOR_ADP150,
-};
+#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
+	defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
 
-static struct regulator_userspace_consumer_data adp150_userspace_comsumer_data = {
-	.name = REGULATOR_ADP150,
-	.num_supplies = 1,
-	.supplies = &adp150_bulk_data,
+static struct resource iio_gpio_trigger_resources[] = {
+	[0] = {
+		.start  = IRQ_PF5,
+		.end    = IRQ_PF5,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
 };
 
-static struct platform_device adp150_userspace_consumer_device = {
-	.name = "reg-userspace-consumer",
-	.id = 1,
-	.dev = {
-		.platform_data = &adp150_userspace_comsumer_data,
-	},
+static struct platform_device iio_gpio_trigger = {
+	.name = "iio_gpio_trigger",
+	.num_resources = ARRAY_SIZE(iio_gpio_trigger_resources),
+	.resource = iio_gpio_trigger_resources,
 };
 #endif
-#endif
-
 
 static struct platform_device *stamp_devices[] __initdata = {
 
@@ -2368,14 +2818,18 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 #endif
 
-#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
 	&adp_switch_device,
 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
 	defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
 	&adp122_userspace_consumer_device,
-	&adp150_userspace_consumer_device,
 #endif
 #endif
+
+#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
+	defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
+	&iio_gpio_trigger,
+#endif
 };
 
 static int __init stamp_init(void)
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 4f0a2e72ce4c..31498add1a42 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -113,12 +113,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
@@ -230,7 +230,7 @@ static struct resource isp1362_hcd_resources[] = {
 	}, {
 		.start = IRQ_PG15,
 		.end = IRQ_PG15,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
@@ -564,13 +564,35 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+	{
+		.addr = 1,
+		.irq = IRQ_MAC_PHYINT,
+	},
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+	.phydev_number = 1,
+	.phydev_data = bfin_phydev_data,
+	.phy_mode = PHY_INTERFACE_MODE_MII,
+	.mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
+	.dev = {
+		.platform_data = &bfin_mii_bus_data,
+	}
 };
 
 static struct platform_device bfin_mac_device = {
 	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
+	.dev = {
+		.platform_data = &bfin_mii_bus,
+	}
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index d2c427bc6656..43df6afd22ad 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -5,7 +5,7 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
@@ -162,8 +162,14 @@
 #define ANOMALY_05000461 (1)
 /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
 #define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -179,6 +185,7 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
@@ -211,6 +218,6 @@
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
 #define ANOMALY_05000474 (0)
-#define ANOMALY_05000475 (0)
+#define ANOMALY_05000485 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
index 91825c9bd226..fbeb35e14135 100644
--- a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
@@ -1750,48 +1750,4 @@
 /* These need to be last due to the cdef/linux inter-dependencies */
 #include <asm/irq.h>
 
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
-	unsigned long flags, iwr;
-
-	if (val == bfin_read_PLL_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr = bfin_read32(SIC_IWR);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
-	bfin_write16(PLL_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR, iwr);
-	local_irq_restore_hw(flags);
-}
-
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
-	unsigned long flags, iwr;
-
-	if (val == bfin_read_VR_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr = bfin_read32(SIC_IWR);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
-	bfin_write16(VR_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR, iwr);
-	local_irq_restore_hw(flags);
-}
-
 #endif				/* _CDEF_BF534_H */
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index cf396ea40092..0323e6bacdae 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -434,22 +434,22 @@
 
 /* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
 #define TWI0_REGBASE			0xFFC01400
-#define TWI_CLKDIV			0xFFC01400	/* Serial Clock Divider Register                        */
-#define TWI_CONTROL			0xFFC01404	/* TWI Control Register                                         */
-#define TWI_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register                          */
-#define TWI_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register                           */
-#define TWI_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register                          */
-#define TWI_MASTER_CTL		0xFFC01414	/* Master Mode Control Register                         */
-#define TWI_MASTER_STAT		0xFFC01418	/* Master Mode Status Register                          */
-#define TWI_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register                         */
-#define TWI_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register                        */
-#define TWI_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register           */
-#define TWI_FIFO_CTL		0xFFC01428	/* FIFO Control Register                                        */
-#define TWI_FIFO_STAT		0xFFC0142C	/* FIFO Status Register                                         */
-#define TWI_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register      */
-#define TWI_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register      */
-#define TWI_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register       */
-#define TWI_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register       */
+#define TWI0_CLKDIV			0xFFC01400	/* Serial Clock Divider Register                        */
+#define TWI0_CONTROL			0xFFC01404	/* TWI Control Register                                         */
+#define TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register                          */
+#define TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register                           */
+#define TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register                          */
+#define TWI0_MASTER_CTL		0xFFC01414	/* Master Mode Control Register                         */
+#define TWI0_MASTER_STAT		0xFFC01418	/* Master Mode Status Register                          */
+#define TWI0_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register                         */
+#define TWI0_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register                        */
+#define TWI0_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register           */
+#define TWI0_FIFO_CTL		0xFFC01428	/* FIFO Control Register                                        */
+#define TWI0_FIFO_STAT		0xFFC0142C	/* FIFO Status Register                                         */
+#define TWI0_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register      */
+#define TWI0_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register      */
+#define TWI0_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register       */
+#define TWI0_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register       */
 
 /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
 #define PORTGIO					0xFFC01500	/* Port G I/O Pin State Specify Register                                */
@@ -1071,50 +1071,6 @@
 #define FPE			0x10	/* Force Parity Error On Transmit       */
 #define FFE			0x20	/* Force Framing Error On Transmit      */
 
-/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  ****************************/
-/* SPI_CTL Masks																	*/
-#define	TIMOD		0x0003	/* Transfer Initiate Mode                                                       */
-#define RDBR_CORE	0x0000	/*              RDBR Read Initiates, IRQ When RDBR Full         */
-#define	TDBR_CORE	0x0001	/*              TDBR Write Initiates, IRQ When TDBR Empty       */
-#define RDBR_DMA	0x0002	/*              DMA Read, DMA Until FIFO Empty                          */
-#define TDBR_DMA	0x0003	/*              DMA Write, DMA Until FIFO Full                          */
-#define SZ			0x0004	/* Send Zero (When TDBR Empty, Send Zero/Last*)         */
-#define GM			0x0008	/* Get More (When RDBR Full, Overwrite/Discard*)        */
-#define PSSE		0x0010	/* Slave-Select Input Enable                                            */
-#define EMISO		0x0020	/* Enable MISO As Output                                                        */
-#define SIZE		0x0100	/* Size of Words (16/8* Bits)                                           */
-#define LSBF		0x0200	/* LSB First                                                                            */
-#define CPHA		0x0400	/* Clock Phase                                                                          */
-#define CPOL		0x0800	/* Clock Polarity                                                                       */
-#define MSTR		0x1000	/* Master/Slave*                                                                        */
-#define WOM			0x2000	/* Write Open Drain Master                                                      */
-#define SPE			0x4000	/* SPI Enable                                                                           */
-
-/* SPI_FLG Masks																	*/
-#define FLS1		0x0002	/* Enables SPI_FLOUT1 as SPI Slave-Select Output        */
-#define FLS2		0x0004	/* Enables SPI_FLOUT2 as SPI Slave-Select Output        */
-#define FLS3		0x0008	/* Enables SPI_FLOUT3 as SPI Slave-Select Output        */
-#define FLS4		0x0010	/* Enables SPI_FLOUT4 as SPI Slave-Select Output        */
-#define FLS5		0x0020	/* Enables SPI_FLOUT5 as SPI Slave-Select Output        */
-#define FLS6		0x0040	/* Enables SPI_FLOUT6 as SPI Slave-Select Output        */
-#define FLS7		0x0080	/* Enables SPI_FLOUT7 as SPI Slave-Select Output        */
-#define FLG1		0xFDFF	/* Activates SPI_FLOUT1                                                         */
-#define FLG2		0xFBFF	/* Activates SPI_FLOUT2                                                         */
-#define FLG3		0xF7FF	/* Activates SPI_FLOUT3                                                         */
-#define FLG4		0xEFFF	/* Activates SPI_FLOUT4                                                         */
-#define FLG5		0xDFFF	/* Activates SPI_FLOUT5                                                         */
-#define FLG6		0xBFFF	/* Activates SPI_FLOUT6                                                         */
-#define FLG7		0x7FFF	/* Activates SPI_FLOUT7                                                         */
-
-/* SPI_STAT Masks																				*/
-#define SPIF		0x0001	/* SPI Finished (Single-Word Transfer Complete)                                 */
-#define MODF		0x0002	/* Mode Fault Error (Another Device Tried To Become Master)             */
-#define TXE			0x0004	/* Transmission Error (Data Sent With No New Data In TDBR)              */
-#define TXS			0x0008	/* SPI_TDBR Data Buffer Status (Full/Empty*)                                    */
-#define RBSY		0x0010	/* Receive Error (Data Received With RDBR Full)                                 */
-#define RXS			0x0020	/* SPI_RDBR Data Buffer Status (Full/Empty*)                                    */
-#define TXCOL		0x0040	/* Transmit Collision Error (Corrupt Data May Have Been Sent)   */
-
 /*  ****************  GENERAL PURPOSE TIMER MASKS  **********************/
 /* TIMER_ENABLE Masks													*/
 #define TIMEN0			0x0001	/* Enable Timer 0                                       */
@@ -1241,86 +1197,6 @@
 #define PH14	0x4000
 #define PH15	0x8000
 
-/* *******************  SERIAL PORT MASKS  **************************************/
-/* SPORTx_TCR1 Masks															*/
-#define TSPEN		0x0001	/* Transmit Enable                                                              */
-#define ITCLK		0x0002	/* Internal Transmit Clock Select                               */
-#define DTYPE_NORM	0x0004	/* Data Format Normal                                                   */
-#define DTYPE_ULAW	0x0008	/* Compand Using u-Law                                                  */
-#define DTYPE_ALAW	0x000C	/* Compand Using A-Law                                                  */
-#define TLSBIT		0x0010	/* Transmit Bit Order                                                   */
-#define ITFS		0x0200	/* Internal Transmit Frame Sync Select                  */
-#define TFSR		0x0400	/* Transmit Frame Sync Required Select                  */
-#define DITFS		0x0800	/* Data-Independent Transmit Frame Sync Select  */
-#define LTFS		0x1000	/* Low Transmit Frame Sync Select                               */
-#define LATFS		0x2000	/* Late Transmit Frame Sync Select                              */
-#define TCKFE		0x4000	/* Clock Falling Edge Select                                    */
-
-/* SPORTx_TCR2 Masks and Macro													*/
-#define SLEN(x)		((x)&0x1F)	/* SPORT TX Word Length (2 - 31)                                */
-#define TXSE		0x0100	/* TX Secondary Enable                                                  */
-#define TSFSE		0x0200	/* Transmit Stereo Frame Sync Enable                    */
-#define TRFST		0x0400	/* Left/Right Order (1 = Right Channel 1st)             */
-
-/* SPORTx_RCR1 Masks															*/
-#define RSPEN		0x0001	/* Receive Enable                                                               */
-#define IRCLK		0x0002	/* Internal Receive Clock Select                                */
-#define DTYPE_NORM	0x0004	/* Data Format Normal                                                   */
-#define DTYPE_ULAW	0x0008	/* Compand Using u-Law                                                  */
-#define DTYPE_ALAW	0x000C	/* Compand Using A-Law                                                  */
-#define RLSBIT		0x0010	/* Receive Bit Order                                                    */
-#define IRFS		0x0200	/* Internal Receive Frame Sync Select                   */
-#define RFSR		0x0400	/* Receive Frame Sync Required Select                   */
-#define LRFS		0x1000	/* Low Receive Frame Sync Select                                */
-#define LARFS		0x2000	/* Late Receive Frame Sync Select                               */
-#define RCKFE		0x4000	/* Clock Falling Edge Select                                    */
-
-/* SPORTx_RCR2 Masks															*/
-#define SLEN(x)		((x)&0x1F)	/* SPORT RX Word Length (2 - 31)                                */
-#define RXSE		0x0100	/* RX Secondary Enable                                                  */
-#define RSFSE		0x0200	/* RX Stereo Frame Sync Enable                                  */
-#define RRFST		0x0400	/* Right-First Data Order                                               */
-
-/* SPORTx_STAT Masks															*/
-#define RXNE		0x0001	/* Receive FIFO Not Empty Status                                */
-#define RUVF		0x0002	/* Sticky Receive Underflow Status                              */
-#define ROVF		0x0004	/* Sticky Receive Overflow Status                               */
-#define TXF			0x0008	/* Transmit FIFO Full Status                                    */
-#define TUVF		0x0010	/* Sticky Transmit Underflow Status                             */
-#define TOVF		0x0020	/* Sticky Transmit Overflow Status                              */
-#define TXHRE		0x0040	/* Transmit Hold Register Empty                                 */
-
-/* SPORTx_MCMC1 Macros															*/
-#define SP_WOFF(x)		((x) & 0x3FF)	/* Multichannel Window Offset Field                     */
-
-/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits						*/
-#define SP_WSIZE(x)	(((((x)>>0x3)-1)&0xF) << 0xC)	/* Multichannel Window Size = (x/8)-1   */
-
-/* SPORTx_MCMC2 Masks															*/
-#define REC_BYPASS	0x0000	/* Bypass Mode (No Clock Recovery)                              */
-#define REC_2FROM4	0x0002	/* Recover 2 MHz Clock from 4 MHz Clock                 */
-#define REC_8FROM16	0x0003	/* Recover 8 MHz Clock from 16 MHz Clock                */
-#define MCDTXPE		0x0004	/* Multichannel DMA Transmit Packing                    */
-#define MCDRXPE		0x0008	/* Multichannel DMA Receive Packing                             */
-#define MCMEN		0x0010	/* Multichannel Frame Mode Enable                               */
-#define FSDR		0x0080	/* Multichannel Frame Sync to Data Relationship */
-#define MFD_0		0x0000	/* Multichannel Frame Delay = 0                                 */
-#define MFD_1		0x1000	/* Multichannel Frame Delay = 1                                 */
-#define MFD_2		0x2000	/* Multichannel Frame Delay = 2                                 */
-#define MFD_3		0x3000	/* Multichannel Frame Delay = 3                                 */
-#define MFD_4		0x4000	/* Multichannel Frame Delay = 4                                 */
-#define MFD_5		0x5000	/* Multichannel Frame Delay = 5                                 */
-#define MFD_6		0x6000	/* Multichannel Frame Delay = 6                                 */
-#define MFD_7		0x7000	/* Multichannel Frame Delay = 7                                 */
-#define MFD_8		0x8000	/* Multichannel Frame Delay = 8                                 */
-#define MFD_9		0x9000	/* Multichannel Frame Delay = 9                                 */
-#define MFD_10		0xA000	/* Multichannel Frame Delay = 10                                */
-#define MFD_11		0xB000	/* Multichannel Frame Delay = 11                                */
-#define MFD_12		0xC000	/* Multichannel Frame Delay = 12                                */
-#define MFD_13		0xD000	/* Multichannel Frame Delay = 13                                */
-#define MFD_14		0xE000	/* Multichannel Frame Delay = 14                                */
-#define MFD_15		0xF000	/* Multichannel Frame Delay = 15                                */
-
 /* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  *************************/
 /* EBIU_AMGCTL Masks																	*/
 #define AMCKEN			0x0001	/* Enable CLKOUT                                                                        */
@@ -1642,7 +1518,7 @@
 #define	TWI_ENA		0x0080	/* TWI Enable                                                                   */
 #define	SCCB		0x0200	/* SCCB Compatibility Enable                                    */
 
-/* TWI_SLAVE_CTRL Masks															*/
+/* TWI_SLAVE_CTL Masks															*/
 #define	SEN			0x0001	/* Slave Enable                                                                 */
 #define	SADD_LEN	0x0002	/* Slave Address Length                                                 */
 #define	STDVAL		0x0004	/* Slave Transmit Data Valid                                    */
@@ -1653,7 +1529,7 @@
 #define	SDIR		0x0001	/* Slave Transfer Direction (Transmit/Receive*) */
 #define GCALL		0x0002	/* General Call Indicator                                               */
 
-/* TWI_MASTER_CTRL Masks													*/
+/* TWI_MASTER_CTL Masks													*/
 #define	MEN			0x0001	/* Master Mode Enable                                           */
 #define	MADD_LEN	0x0002	/* Master Address Length                                        */
 #define	MDIR		0x0004	/* Master Transmit Direction (RX/TX*)           */
diff --git a/arch/blackfin/mach-bf537/include/mach/gpio.h b/arch/blackfin/mach-bf537/include/mach/gpio.h
index 104bff85290d..f80c2995efdb 100644
--- a/arch/blackfin/mach-bf537/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf537/include/mach/gpio.h
@@ -9,54 +9,54 @@
 
 #define MAX_BLACKFIN_GPIOS 48
 
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PG0	16
-#define	GPIO_PG1	17
-#define	GPIO_PG2	18
-#define	GPIO_PG3	19
-#define	GPIO_PG4	20
-#define	GPIO_PG5	21
-#define	GPIO_PG6	22
-#define	GPIO_PG7	23
-#define	GPIO_PG8	24
-#define	GPIO_PG9	25
-#define	GPIO_PG10      	26
-#define	GPIO_PG11      	27
-#define	GPIO_PG12      	28
-#define	GPIO_PG13      	29
-#define	GPIO_PG14      	30
-#define	GPIO_PG15      	31
-#define	GPIO_PH0	32
-#define	GPIO_PH1	33
-#define	GPIO_PH2	34
-#define	GPIO_PH3	35
-#define	GPIO_PH4	36
-#define	GPIO_PH5	37
-#define	GPIO_PH6	38
-#define	GPIO_PH7	39
-#define	GPIO_PH8	40
-#define	GPIO_PH9	41
-#define	GPIO_PH10      	42
-#define	GPIO_PH11      	43
-#define	GPIO_PH12      	44
-#define	GPIO_PH13      	45
-#define	GPIO_PH14      	46
-#define	GPIO_PH15      	47
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PG0	16
+#define GPIO_PG1	17
+#define GPIO_PG2	18
+#define GPIO_PG3	19
+#define GPIO_PG4	20
+#define GPIO_PG5	21
+#define GPIO_PG6	22
+#define GPIO_PG7	23
+#define GPIO_PG8	24
+#define GPIO_PG9	25
+#define GPIO_PG10	26
+#define GPIO_PG11	27
+#define GPIO_PG12	28
+#define GPIO_PG13	29
+#define GPIO_PG14	30
+#define GPIO_PG15	31
+#define GPIO_PH0	32
+#define GPIO_PH1	33
+#define GPIO_PH2	34
+#define GPIO_PH3	35
+#define GPIO_PH4	36
+#define GPIO_PH5	37
+#define GPIO_PH6	38
+#define GPIO_PH7	39
+#define GPIO_PH8	40
+#define GPIO_PH9	41
+#define GPIO_PH10	42
+#define GPIO_PH11	43
+#define GPIO_PH12	44
+#define GPIO_PH13	45
+#define GPIO_PH14	46
+#define GPIO_PH15	47
 
 #define PORT_F GPIO_PF0
 #define PORT_G GPIO_PG0
diff --git a/arch/blackfin/mach-bf537/include/mach/pll.h b/arch/blackfin/mach-bf537/include/mach/pll.h
new file mode 100644
index 000000000000..169c106d0edb
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/pll.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#ifndef _MACH_PLL_H
+#define _MACH_PLL_H
+
+#include <asm/blackfin.h>
+#include <asm/irqflags.h>
+
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr = bfin_read32(SIC_IWR);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR, IWR_ENABLE(0));
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR, iwr);
+	hard_local_irq_restore(flags);
+}
+
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr = bfin_read32(SIC_IWR);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR, IWR_ENABLE(0));
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR, iwr);
+	hard_local_irq_restore(flags);
+}
+
+#endif /* _MACH_PLL_H */
diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h
index da9760329e49..71d9eaeb579e 100644
--- a/arch/blackfin/mach-bf537/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf537/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	(MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE)	/* We additionally handle PORTJ */
+#define MAX_RESOURCES	(MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE)	/* We additionally handle PORTJ */
 
 #define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
 #define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
@@ -37,6 +37,7 @@
 #define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
 #define P_TACLK0	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
 #define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF10
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 
 #define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
@@ -135,7 +136,6 @@
 	P_MDC, \
 	P_MDIO, 0}
 
-
 #define P_RMII0 {\
 	P_MII0_ETxD0, \
 	P_MII0_ETxD1, \
@@ -148,4 +148,5 @@
 	P_RMII0_CRS_DV, \
 	P_MDC, \
 	P_MDIO, 0}
-#endif			        	/* _MACH_PORTMUX_H_ */
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 1a1f65855b03..c6fb0a52f849 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -695,7 +695,7 @@ static struct platform_device bf538_spi_master0 = {
 };
 
 static struct bfin5xx_spi_master bf538_spi_master_info1 = {
-	.num_chipselect = 8,
+	.num_chipselect = 2,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
@@ -711,7 +711,7 @@ static struct platform_device bf538_spi_master1 = {
 };
 
 static struct bfin5xx_spi_master bf538_spi_master_info2 = {
-	.num_chipselect = 8,
+	.num_chipselect = 2,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI2_SCK, P_SPI2_MISO, P_SPI2_MOSI, 0},
 };
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index d882b7e6f59b..8774b481c78e 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -5,14 +5,14 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
- *  - Revision G, 09/18/2008; ADSP-BF538/BF538F Blackfin Processor Anomaly List
- *  - Revision L, 09/18/2008; ADSP-BF539/BF539F Blackfin Processor Anomaly List
+ *  - Revision H, 07/10/2009; ADSP-BF538/BF538F Blackfin Processor Anomaly List
+ *  - Revision M, 07/10/2009; ADSP-BF539/BF539F Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -132,10 +132,18 @@
 #define ANOMALY_05000443 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
 /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
 #define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -185,6 +193,6 @@
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
 #define ANOMALY_05000474 (0)
-#define ANOMALY_05000475 (0)
+#define ANOMALY_05000485 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
index 401ebd79d0aa..085b06b8c0a5 100644
--- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
+++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
@@ -1293,70 +1293,6 @@
 #define bfin_write_PPI_COUNT(val)      bfin_write16(PPI_COUNT, val)
 #define bfin_read_PPI_FRAME()          bfin_read16(PPI_FRAME)
 #define bfin_write_PPI_FRAME(val)      bfin_write16(PPI_FRAME, val)
-#define bfin_read_TWI0_CLKDIV()        bfin_read16(TWI0_CLKDIV)
-#define bfin_write_TWI0_CLKDIV(val)    bfin_write16(TWI0_CLKDIV, val)
-#define bfin_read_TWI0_CONTROL()       bfin_read16(TWI0_CONTROL)
-#define bfin_write_TWI0_CONTROL(val)   bfin_write16(TWI0_CONTROL, val)
-#define bfin_read_TWI0_SLAVE_CTRL()    bfin_read16(TWI0_SLAVE_CTRL)
-#define bfin_write_TWI0_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val)
-#define bfin_read_TWI0_SLAVE_STAT()    bfin_read16(TWI0_SLAVE_STAT)
-#define bfin_write_TWI0_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val)
-#define bfin_read_TWI0_SLAVE_ADDR()    bfin_read16(TWI0_SLAVE_ADDR)
-#define bfin_write_TWI0_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val)
-#define bfin_read_TWI0_MASTER_CTL()    bfin_read16(TWI0_MASTER_CTL)
-#define bfin_write_TWI0_MASTER_CTL(val) bfin_write16(TWI0_MASTER_CTL, val)
-#define bfin_read_TWI0_MASTER_STAT()   bfin_read16(TWI0_MASTER_STAT)
-#define bfin_write_TWI0_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val)
-#define bfin_read_TWI0_MASTER_ADDR()   bfin_read16(TWI0_MASTER_ADDR)
-#define bfin_write_TWI0_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val)
-#define bfin_read_TWI0_INT_STAT()      bfin_read16(TWI0_INT_STAT)
-#define bfin_write_TWI0_INT_STAT(val)  bfin_write16(TWI0_INT_STAT, val)
-#define bfin_read_TWI0_INT_MASK()      bfin_read16(TWI0_INT_MASK)
-#define bfin_write_TWI0_INT_MASK(val)  bfin_write16(TWI0_INT_MASK, val)
-#define bfin_read_TWI0_FIFO_CTL()      bfin_read16(TWI0_FIFO_CTL)
-#define bfin_write_TWI0_FIFO_CTL(val)  bfin_write16(TWI0_FIFO_CTL, val)
-#define bfin_read_TWI0_FIFO_STAT()     bfin_read16(TWI0_FIFO_STAT)
-#define bfin_write_TWI0_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val)
-#define bfin_read_TWI0_XMT_DATA8()     bfin_read16(TWI0_XMT_DATA8)
-#define bfin_write_TWI0_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val)
-#define bfin_read_TWI0_XMT_DATA16()    bfin_read16(TWI0_XMT_DATA16)
-#define bfin_write_TWI0_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val)
-#define bfin_read_TWI0_RCV_DATA8()     bfin_read16(TWI0_RCV_DATA8)
-#define bfin_write_TWI0_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val)
-#define bfin_read_TWI0_RCV_DATA16()    bfin_read16(TWI0_RCV_DATA16)
-#define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val)
-#define bfin_read_TWI1_CLKDIV()        bfin_read16(TWI1_CLKDIV)
-#define bfin_write_TWI1_CLKDIV(val)    bfin_write16(TWI1_CLKDIV, val)
-#define bfin_read_TWI1_CONTROL()       bfin_read16(TWI1_CONTROL)
-#define bfin_write_TWI1_CONTROL(val)   bfin_write16(TWI1_CONTROL, val)
-#define bfin_read_TWI1_SLAVE_CTRL()    bfin_read16(TWI1_SLAVE_CTRL)
-#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val)
-#define bfin_read_TWI1_SLAVE_STAT()    bfin_read16(TWI1_SLAVE_STAT)
-#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val)
-#define bfin_read_TWI1_SLAVE_ADDR()    bfin_read16(TWI1_SLAVE_ADDR)
-#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val)
-#define bfin_read_TWI1_MASTER_CTL()    bfin_read16(TWI1_MASTER_CTL)
-#define bfin_write_TWI1_MASTER_CTL(val) bfin_write16(TWI1_MASTER_CTL, val)
-#define bfin_read_TWI1_MASTER_STAT()   bfin_read16(TWI1_MASTER_STAT)
-#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val)
-#define bfin_read_TWI1_MASTER_ADDR()   bfin_read16(TWI1_MASTER_ADDR)
-#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val)
-#define bfin_read_TWI1_INT_STAT()      bfin_read16(TWI1_INT_STAT)
-#define bfin_write_TWI1_INT_STAT(val)  bfin_write16(TWI1_INT_STAT, val)
-#define bfin_read_TWI1_INT_MASK()      bfin_read16(TWI1_INT_MASK)
-#define bfin_write_TWI1_INT_MASK(val)  bfin_write16(TWI1_INT_MASK, val)
-#define bfin_read_TWI1_FIFO_CTL()      bfin_read16(TWI1_FIFO_CTL)
-#define bfin_write_TWI1_FIFO_CTL(val)  bfin_write16(TWI1_FIFO_CTL, val)
-#define bfin_read_TWI1_FIFO_STAT()     bfin_read16(TWI1_FIFO_STAT)
-#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val)
-#define bfin_read_TWI1_XMT_DATA8()     bfin_read16(TWI1_XMT_DATA8)
-#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val)
-#define bfin_read_TWI1_XMT_DATA16()    bfin_read16(TWI1_XMT_DATA16)
-#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val)
-#define bfin_read_TWI1_RCV_DATA8()     bfin_read16(TWI1_RCV_DATA8)
-#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val)
-#define bfin_read_TWI1_RCV_DATA16()    bfin_read16(TWI1_RCV_DATA16)
-#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val)
 #define bfin_read_CAN_MC1()            bfin_read16(CAN_MC1)
 #define bfin_write_CAN_MC1(val)        bfin_write16(CAN_MC1, val)
 #define bfin_read_CAN_MD1()            bfin_read16(CAN_MD1)
@@ -2091,54 +2027,4 @@
 /* These need to be last due to the cdef/linux inter-dependencies */
 #include <asm/irq.h>
 
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
-	unsigned long flags, iwr0, iwr1;
-
-	if (val == bfin_read_PLL_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr0 = bfin_read32(SIC_IWR0);
-	iwr1 = bfin_read32(SIC_IWR1);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
-	bfin_write32(SIC_IWR1, 0);
-
-	bfin_write16(PLL_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR0, iwr0);
-	bfin_write32(SIC_IWR1, iwr1);
-	local_irq_restore_hw(flags);
-}
-
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
-	unsigned long flags, iwr0, iwr1;
-
-	if (val == bfin_read_VR_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr0 = bfin_read32(SIC_IWR0);
-	iwr1 = bfin_read32(SIC_IWR1);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
-	bfin_write32(SIC_IWR1, 0);
-
-	bfin_write16(VR_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR0, iwr0);
-	bfin_write32(SIC_IWR1, iwr1);
-	local_irq_restore_hw(flags);
-}
-
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index d7061d9f2a83..7a8ac5f44204 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -32,6 +32,7 @@
 /* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
 #define	SWRST			0xFFC00100  /* Software	Reset Register (16-bit) */
 #define	SYSCR			0xFFC00104  /* System Configuration registe */
+#define	SIC_RVECT		0xFFC00108
 #define	SIC_IMASK0		0xFFC0010C  /* Interrupt Mask Register */
 #define	SIC_IAR0		0xFFC00110  /* Interrupt Assignment Register 0 */
 #define	SIC_IAR1		0xFFC00114  /* Interrupt Assignment Register 1 */
@@ -442,15 +443,15 @@
 /* Two-Wire Interface 0	(0xFFC01400 - 0xFFC014FF)			 */
 #define	TWI0_CLKDIV			0xFFC01400	/* Serial Clock	Divider	Register */
 #define	TWI0_CONTROL		0xFFC01404	/* TWI0	Master Internal	Time Reference Register */
-#define	TWI0_SLAVE_CTRL		0xFFC01408	/* Slave Mode Control Register */
+#define	TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register */
 #define	TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register */
 #define	TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register */
-#define	TWI0_MASTER_CTRL	0xFFC01414	/* Master Mode Control Register */
+#define	TWI0_MASTER_CTL	0xFFC01414	/* Master Mode Control Register */
 #define	TWI0_MASTER_STAT	0xFFC01418	/* Master Mode Status Register */
 #define	TWI0_MASTER_ADDR	0xFFC0141C	/* Master Mode Address Register */
 #define	TWI0_INT_STAT		0xFFC01420	/* TWI0	Master Interrupt Register */
 #define	TWI0_INT_MASK		0xFFC01424	/* TWI0	Master Interrupt Mask Register */
-#define	TWI0_FIFO_CTRL		0xFFC01428	/* FIFO	Control	Register */
+#define	TWI0_FIFO_CTL		0xFFC01428	/* FIFO	Control	Register */
 #define	TWI0_FIFO_STAT		0xFFC0142C	/* FIFO	Status Register */
 #define	TWI0_XMT_DATA8		0xFFC01480	/* FIFO	Transmit Data Single Byte Register */
 #define	TWI0_XMT_DATA16		0xFFC01484	/* FIFO	Transmit Data Double Byte Register */
@@ -761,15 +762,15 @@
 /* Two-Wire Interface 1	(0xFFC02200 - 0xFFC022FF)			 */
 #define	TWI1_CLKDIV			0xFFC02200	/* Serial Clock	Divider	Register */
 #define	TWI1_CONTROL		0xFFC02204	/* TWI1	Master Internal	Time Reference Register */
-#define	TWI1_SLAVE_CTRL		0xFFC02208	/* Slave Mode Control Register */
+#define	TWI1_SLAVE_CTL		0xFFC02208	/* Slave Mode Control Register */
 #define	TWI1_SLAVE_STAT		0xFFC0220C	/* Slave Mode Status Register */
 #define	TWI1_SLAVE_ADDR		0xFFC02210	/* Slave Mode Address Register */
-#define	TWI1_MASTER_CTRL	0xFFC02214	/* Master Mode Control Register */
+#define	TWI1_MASTER_CTL	0xFFC02214	/* Master Mode Control Register */
 #define	TWI1_MASTER_STAT	0xFFC02218	/* Master Mode Status Register */
 #define	TWI1_MASTER_ADDR	0xFFC0221C	/* Master Mode Address Register */
 #define	TWI1_INT_STAT		0xFFC02220	/* TWI1	Master Interrupt Register */
 #define	TWI1_INT_MASK		0xFFC02224	/* TWI1	Master Interrupt Mask Register */
-#define	TWI1_FIFO_CTRL		0xFFC02228	/* FIFO	Control	Register */
+#define	TWI1_FIFO_CTL		0xFFC02228	/* FIFO	Control	Register */
 #define	TWI1_FIFO_STAT		0xFFC0222C	/* FIFO	Status Register */
 #define	TWI1_XMT_DATA8		0xFFC02280	/* FIFO	Transmit Data Single Byte Register */
 #define	TWI1_XMT_DATA16		0xFFC02284	/* FIFO	Transmit Data Double Byte Register */
@@ -1610,113 +1611,6 @@
 #define	UCEN_P		0x00
 
 
-/* **********  SERIAL PORT MASKS  ********************** */
-/* SPORTx_TCR1 Masks */
-#define	TSPEN		0x0001	/* TX enable  */
-#define	ITCLK		0x0002	/* Internal TX Clock Select  */
-#define	TDTYPE		0x000C	/* TX Data Formatting Select */
-#define	DTYPE_NORM	0x0000		/* Data	Format Normal */
-#define	DTYPE_ULAW	0x0008		/* Compand Using u-Law */
-#define	DTYPE_ALAW	0x000C		/* Compand Using A-Law */
-#define	TLSBIT		0x0010	/* TX Bit Order */
-#define	ITFS		0x0200	/* Internal TX Frame Sync Select  */
-#define	TFSR		0x0400	/* TX Frame Sync Required Select  */
-#define	DITFS		0x0800	/* Data	Independent TX Frame Sync Select  */
-#define	LTFS		0x1000	/* Low TX Frame	Sync Select  */
-#define	LATFS		0x2000	/* Late	TX Frame Sync Select  */
-#define	TCKFE		0x4000	/* TX Clock Falling Edge Select */
-/* SPORTx_RCR1 Deprecated Masks								 */
-#define	TULAW		DTYPE_ULAW		/* Compand Using u-Law */
-#define	TALAW		DTYPE_ALAW			/* Compand Using A-Law */
-
-/* SPORTx_TCR2 Masks */
-#ifdef _MISRA_RULES
-#define	SLEN(x)		((x)&0x1Fu)	/* SPORT TX Word Length	(2 - 31) */
-#else
-#define	SLEN(x)		((x)&0x1F)	/* SPORT TX Word Length	(2 - 31) */
-#endif /* _MISRA_RULES */
-#define	TXSE		0x0100	/*TX Secondary Enable */
-#define	TSFSE		0x0200	/*TX Stereo Frame Sync Enable */
-#define	TRFST		0x0400	/*TX Right-First Data Order  */
-
-/* SPORTx_RCR1 Masks */
-#define	RSPEN		0x0001	/* RX enable  */
-#define	IRCLK		0x0002	/* Internal RX Clock Select  */
-#define	RDTYPE		0x000C	/* RX Data Formatting Select */
-#define	DTYPE_NORM	0x0000		/* no companding */
-#define	DTYPE_ULAW	0x0008		/* Compand Using u-Law */
-#define	DTYPE_ALAW	0x000C		/* Compand Using A-Law */
-#define	RLSBIT		0x0010	/* RX Bit Order */
-#define	IRFS		0x0200	/* Internal RX Frame Sync Select  */
-#define	RFSR		0x0400	/* RX Frame Sync Required Select  */
-#define	LRFS		0x1000	/* Low RX Frame	Sync Select  */
-#define	LARFS		0x2000	/* Late	RX Frame Sync Select  */
-#define	RCKFE		0x4000	/* RX Clock Falling Edge Select */
-/* SPORTx_RCR1 Deprecated Masks								 */
-#define	RULAW		DTYPE_ULAW		/* Compand Using u-Law */
-#define	RALAW		DTYPE_ALAW			/* Compand Using A-Law */
-
-/* SPORTx_RCR2 Masks */
-#ifdef _MISRA_RULES
-#define	SLEN(x)		((x)&0x1Fu)	/* SPORT RX Word Length	(2 - 31) */
-#else
-#define	SLEN(x)		((x)&0x1F)	/* SPORT RX Word Length	(2 - 31) */
-#endif /* _MISRA_RULES */
-#define	RXSE		0x0100	/*RX Secondary Enable */
-#define	RSFSE		0x0200	/*RX Stereo Frame Sync Enable */
-#define	RRFST		0x0400	/*Right-First Data Order  */
-
-/*SPORTx_STAT Masks */
-#define	RXNE		0x0001		/*RX FIFO Not Empty Status */
-#define	RUVF		0x0002		/*RX Underflow Status */
-#define	ROVF		0x0004		/*RX Overflow Status */
-#define	TXF			0x0008		/*TX FIFO Full Status */
-#define	TUVF		0x0010		/*TX Underflow Status */
-#define	TOVF		0x0020		/*TX Overflow Status */
-#define	TXHRE		0x0040		/*TX Hold Register Empty */
-
-/*SPORTx_MCMC1 Masks */
-#define	WOFF			0x000003FF	/*Multichannel Window Offset Field */
-/* SPORTx_MCMC1	Macros								 */
-#ifdef _MISRA_RULES
-#define	SET_WOFF(x)		((x) & 0x3FFu)	/* Multichannel	Window Offset Field */
-/* Only	use SET_WSIZE Macro With Logic OR While	Setting	Lower Order Bits */
-#define	SET_WSIZE(x)	(((((x)>>0x3)-1u)&0xFu)	<< 0xC)	/* Multichannel	Window Size = (x/8)-1 */
-#else
-#define	SET_WOFF(x)		((x) & 0x3FF)	/* Multichannel	Window Offset Field */
-/* Only	use SET_WSIZE Macro With Logic OR While	Setting	Lower Order Bits */
-#define	SET_WSIZE(x)	(((((x)>>0x3)-1)&0xF) << 0xC)	/* Multichannel	Window Size = (x/8)-1 */
-#endif /* _MISRA_RULES */
-
-
-/*SPORTx_MCMC2 Masks */
-#define	MCCRM		0x0003	/*Multichannel Clock Recovery Mode */
-#define	REC_BYPASS	0x0000		/* Bypass Mode (No Clock Recovery) */
-#define	REC_2FROM4	0x0002		/* Recover 2 MHz Clock from 4 MHz Clock */
-#define	REC_8FROM16	0x0003		/* Recover 8 MHz Clock from 16 MHz Clock */
-#define	MCDTXPE		0x0004	/*Multichannel DMA Transmit Packing */
-#define	MCDRXPE		0x0008	/*Multichannel DMA Receive Packing */
-#define	MCMEN		0x0010	/*Multichannel Frame Mode Enable */
-#define	FSDR		0x0080	/*Multichannel Frame Sync to Data Relationship */
-#define	MFD			0xF000	/*Multichannel Frame Delay    */
-#define	MFD_0		0x0000		/* Multichannel	Frame Delay = 0 */
-#define	MFD_1		0x1000		/* Multichannel	Frame Delay = 1 */
-#define	MFD_2		0x2000		/* Multichannel	Frame Delay = 2 */
-#define	MFD_3		0x3000		/* Multichannel	Frame Delay = 3 */
-#define	MFD_4		0x4000		/* Multichannel	Frame Delay = 4 */
-#define	MFD_5		0x5000		/* Multichannel	Frame Delay = 5 */
-#define	MFD_6		0x6000		/* Multichannel	Frame Delay = 6 */
-#define	MFD_7		0x7000		/* Multichannel	Frame Delay = 7 */
-#define	MFD_8		0x8000		/* Multichannel	Frame Delay = 8 */
-#define	MFD_9		0x9000		/* Multichannel	Frame Delay = 9 */
-#define	MFD_10		0xA000		/* Multichannel	Frame Delay = 10 */
-#define	MFD_11		0xB000		/* Multichannel	Frame Delay = 11 */
-#define	MFD_12		0xC000		/* Multichannel	Frame Delay = 12 */
-#define	MFD_13		0xD000		/* Multichannel	Frame Delay = 13 */
-#define	MFD_14		0xE000		/* Multichannel	Frame Delay = 14 */
-#define	MFD_15		0xF000		/* Multichannel	Frame Delay = 15 */
-
-
 /*  *********  PARALLEL	PERIPHERAL INTERFACE (PPI) MASKS ****************   */
 /*  PPI_CONTROL	Masks	      */
 #define	PORT_EN		0x0001	/* PPI Port Enable  */
@@ -2001,78 +1895,6 @@
 #define	PE14_P	0xE
 #define	PE15_P	0xF
 
-
-/* ***********	SERIAL PERIPHERAL INTERFACE (SPI) MASKS	 **************** */
-/* SPIx_CTL Masks */
-#define	TIMOD		0x0003		/* Transfer Initiate Mode */
-#define	RDBR_CORE	0x0000		/*		RDBR Read Initiates, IRQ When RDBR Full */
-#define	TDBR_CORE	0x0001		/*		TDBR Write Initiates, IRQ When TDBR Empty */
-#define	RDBR_DMA	0x0002		/*		DMA Read, DMA Until FIFO Empty */
-#define	TDBR_DMA	0x0003		/*		DMA Write, DMA Until FIFO Full */
-#define	SZ			0x0004		/* Send	Zero (When TDBR	Empty, Send Zero/Last*) */
-#define	GM			0x0008		/* Get More (When RDBR Full, Overwrite/Discard*) */
-#define	PSSE		0x0010		/* Slave-Select	Input Enable */
-#define	EMISO		0x0020		/* Enable MISO As Output */
-#define	SIZE		0x0100		/* Size	of Words (16/8*	Bits) */
-#define	LSBF		0x0200		/* LSB First			 */
-#define	CPHA		0x0400		/* Clock Phase			 */
-#define	CPOL		0x0800		/* Clock Polarity		 */
-#define	MSTR		0x1000		/* Master/Slave*		 */
-#define	WOM			0x2000		/* Write Open Drain Master */
-#define	SPE			0x4000		/* SPI Enable			 */
-
-/* SPIx_FLG Masks */
-#define	FLS1	0x0002	/* Enables (=1)	SPI_FLOUT1 as flag output for SPI Slave-select */
-#define	FLS2	0x0004	/* Enables (=1)	SPI_FLOUT2 as flag output for SPI Slave-select */
-#define	FLS3	0x0008	/* Enables (=1)	SPI_FLOUT3 as flag output for SPI Slave-select */
-#define	FLS4	0x0010	/* Enables (=1)	SPI_FLOUT4 as flag output for SPI Slave-select */
-#define	FLS5	0x0020	/* Enables (=1)	SPI_FLOUT5 as flag output for SPI Slave-select */
-#define	FLS6	0x0040	/* Enables (=1)	SPI_FLOUT6 as flag output for SPI Slave-select */
-#define	FLS7	0x0080	/* Enables (=1)	SPI_FLOUT7 as flag output for SPI Slave-select */
-
-#define	FLG1	0x0200	/* Activates (=0) SPI_FLOUT1 as	flag output for	SPI Slave-select  */
-#define	FLG2	0x0400	/* Activates (=0) SPI_FLOUT2 as	flag output for	SPI Slave-select */
-#define	FLG3	0x0800	/* Activates (=0) SPI_FLOUT3 as	flag output for	SPI Slave-select  */
-#define	FLG4	0x1000	/* Activates (=0) SPI_FLOUT4 as	flag output for	SPI Slave-select  */
-#define	FLG5	0x2000	/* Activates (=0) SPI_FLOUT5 as	flag output for	SPI Slave-select  */
-#define	FLG6	0x4000	/* Activates (=0) SPI_FLOUT6 as	flag output for	SPI Slave-select  */
-#define	FLG7	0x8000	/* Activates (=0) SPI_FLOUT7 as	flag output for	SPI Slave-select */
-
-/* SPIx_FLG Bit	Positions */
-#define	FLS1_P	0x0001	/* Enables (=1)	SPI_FLOUT1 as flag output for SPI Slave-select */
-#define	FLS2_P	0x0002	/* Enables (=1)	SPI_FLOUT2 as flag output for SPI Slave-select */
-#define	FLS3_P	0x0003	/* Enables (=1)	SPI_FLOUT3 as flag output for SPI Slave-select */
-#define	FLS4_P	0x0004	/* Enables (=1)	SPI_FLOUT4 as flag output for SPI Slave-select */
-#define	FLS5_P	0x0005	/* Enables (=1)	SPI_FLOUT5 as flag output for SPI Slave-select */
-#define	FLS6_P	0x0006	/* Enables (=1)	SPI_FLOUT6 as flag output for SPI Slave-select */
-#define	FLS7_P	0x0007	/* Enables (=1)	SPI_FLOUT7 as flag output for SPI Slave-select */
-#define	FLG1_P	0x0009	/* Activates (=0) SPI_FLOUT1 as	flag output for	SPI Slave-select  */
-#define	FLG2_P	0x000A	/* Activates (=0) SPI_FLOUT2 as	flag output for	SPI Slave-select */
-#define	FLG3_P	0x000B	/* Activates (=0) SPI_FLOUT3 as	flag output for	SPI Slave-select  */
-#define	FLG4_P	0x000C	/* Activates (=0) SPI_FLOUT4 as	flag output for	SPI Slave-select  */
-#define	FLG5_P	0x000D	/* Activates (=0) SPI_FLOUT5 as	flag output for	SPI Slave-select  */
-#define	FLG6_P	0x000E	/* Activates (=0) SPI_FLOUT6 as	flag output for	SPI Slave-select  */
-#define	FLG7_P	0x000F	/* Activates (=0) SPI_FLOUT7 as	flag output for	SPI Slave-select */
-
-/* SPIx_STAT Masks */
-#define	SPIF	0x0001	/* Set (=1) when SPI single-word transfer complete */
-#define	MODF	0x0002	/* Set (=1) in a master	device when some other device tries to become master */
-#define	TXE		0x0004	/* Set (=1) when transmission occurs with no new data in SPI_TDBR */
-#define	TXS		0x0008	/* SPI_TDBR Data Buffer	Status (0=Empty, 1=Full) */
-#define	RBSY	0x0010	/* Set (=1) when data is received with RDBR full */
-#define	RXS		0x0020	/* SPI_RDBR Data Buffer	Status (0=Empty, 1=Full)  */
-#define	TXCOL	0x0040	/* When	set (=1), corrupt data may have	been transmitted  */
-
-/* SPIx_FLG Masks										 */
-#define	FLG1E	0xFDFF		/* Activates SPI_FLOUT1	 */
-#define	FLG2E	0xFBFF		/* Activates SPI_FLOUT2	 */
-#define	FLG3E	0xF7FF		/* Activates SPI_FLOUT3	 */
-#define	FLG4E	0xEFFF		/* Activates SPI_FLOUT4	 */
-#define	FLG5E	0xDFFF		/* Activates SPI_FLOUT5	 */
-#define	FLG6E	0xBFFF		/* Activates SPI_FLOUT6	 */
-#define	FLG7E	0x7FFF		/* Activates SPI_FLOUT7	 */
-
-
 /* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS	************* */
 /* EBIU_AMGCTL Masks */
 #define	AMCKEN		0x0001	/* Enable CLKOUT */
@@ -2401,7 +2223,7 @@
 #define	XMTSERV		0x0040		/* Transmit FIFO Service */
 #define	RCVSERV		0x0080		/* Receive FIFO	Service */
 
-/* TWIx_FIFO_CTRL Masks					 */
+/* TWIx_FIFO_CTL Masks					 */
 #define	XMTFLUSH	0x0001		/* Transmit Buffer Flush */
 #define	RCVFLUSH	0x0002		/* Receive Buffer Flush */
 #define	XMTINTLEN	0x0004		/* Transmit Buffer Interrupt Length */
diff --git a/arch/blackfin/mach-bf538/include/mach/gpio.h b/arch/blackfin/mach-bf538/include/mach/gpio.h
index 0c346fba9619..bd9adb7183da 100644
--- a/arch/blackfin/mach-bf538/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf538/include/mach/gpio.h
@@ -10,60 +10,60 @@
 #define MAX_BLACKFIN_GPIOS 16
 #define BFIN_SPECIAL_GPIO_BANKS 3
 
-#define	GPIO_PF0	0	/* PF */
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PC0	16	/* PC */
-#define	GPIO_PC1	17
-#define	GPIO_PC4	20
-#define	GPIO_PC5	21
-#define	GPIO_PC6	22
-#define	GPIO_PC7	23
-#define	GPIO_PC8	24
-#define	GPIO_PC9	25
-#define	GPIO_PD0	32	/* PD */
-#define	GPIO_PD1	33
-#define	GPIO_PD2	34
-#define	GPIO_PD3	35
-#define	GPIO_PD4	36
-#define	GPIO_PD5	37
-#define	GPIO_PD6	38
-#define	GPIO_PD7	39
-#define	GPIO_PD8	40
-#define	GPIO_PD9	41
-#define	GPIO_PD10      	42
-#define	GPIO_PD11      	43
-#define	GPIO_PD12      	44
-#define	GPIO_PD13      	45
-#define	GPIO_PE0	48	/* PE */
-#define	GPIO_PE1	49
-#define	GPIO_PE2	50
-#define	GPIO_PE3	51
-#define	GPIO_PE4	52
-#define	GPIO_PE5	53
-#define	GPIO_PE6	54
-#define	GPIO_PE7	55
-#define	GPIO_PE8	56
-#define	GPIO_PE9	57
-#define	GPIO_PE10      	58
-#define	GPIO_PE11      	59
-#define	GPIO_PE12      	60
-#define	GPIO_PE13      	61
-#define	GPIO_PE14      	62
-#define	GPIO_PE15      	63
+#define GPIO_PF0	0	/* PF */
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PC0	16	/* PC */
+#define GPIO_PC1	17
+#define GPIO_PC4	20
+#define GPIO_PC5	21
+#define GPIO_PC6	22
+#define GPIO_PC7	23
+#define GPIO_PC8	24
+#define GPIO_PC9	25
+#define GPIO_PD0	32	/* PD */
+#define GPIO_PD1	33
+#define GPIO_PD2	34
+#define GPIO_PD3	35
+#define GPIO_PD4	36
+#define GPIO_PD5	37
+#define GPIO_PD6	38
+#define GPIO_PD7	39
+#define GPIO_PD8	40
+#define GPIO_PD9	41
+#define GPIO_PD10	42
+#define GPIO_PD11	43
+#define GPIO_PD12	44
+#define GPIO_PD13	45
+#define GPIO_PE0	48	/* PE */
+#define GPIO_PE1	49
+#define GPIO_PE2	50
+#define GPIO_PE3	51
+#define GPIO_PE4	52
+#define GPIO_PE5	53
+#define GPIO_PE6	54
+#define GPIO_PE7	55
+#define GPIO_PE8	56
+#define GPIO_PE9	57
+#define GPIO_PE10	58
+#define GPIO_PE11	59
+#define GPIO_PE12	60
+#define GPIO_PE13	61
+#define GPIO_PE14	62
+#define GPIO_PE15	63
 
 #define PORT_F GPIO_PF0
 #define PORT_C GPIO_PC0
diff --git a/arch/blackfin/mach-bf538/include/mach/pll.h b/arch/blackfin/mach-bf538/include/mach/pll.h
new file mode 100644
index 000000000000..b30bbcd412a7
--- /dev/null
+++ b/arch/blackfin/mach-bf538/include/mach/pll.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_PLL_H
+#define _MACH_PLL_H
+
+#include <asm/blackfin.h>
+#include <asm/irqflags.h>
+
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	hard_local_irq_restore(flags);
+}
+
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	hard_local_irq_restore(flags);
+}
+
+#endif /* _MACH_PLL_H */
diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h
index 0083ba13ee9e..b773c5fdbc72 100644
--- a/arch/blackfin/mach-bf538/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf538/include/mach/portmux.h
@@ -108,6 +108,7 @@
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index dbb6b1d83f6d..f0c0eef95ba8 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -706,7 +706,6 @@ static struct mtd_partition partition_info[] = {
 };
 
 static struct bf5xx_nand_platform bf5xx_nand_platform = {
-	.page_size = NFC_PG_SIZE_256,
 	.data_width = NFC_NWIDTH_8,
 	.partitions = partition_info,
 	.nr_partitions = ARRAY_SIZE(partition_info),
@@ -754,6 +753,44 @@ static struct platform_device bf54x_sdh_device = {
 };
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+unsigned short bfin_can_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+	{
+		.start = 0xFFC02A00,
+		.end = 0xFFC02FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN0_RX,
+		.end = IRQ_CAN0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_TX,
+		.end = IRQ_CAN0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_ERROR,
+		.end = IRQ_CAN0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can_device = {
+	.name = "bfin_can",
+	.num_resources = ARRAY_SIZE(bfin_can_resources),
+	.resource = bfin_can_resources,
+	.dev = {
+		.platform_data = &bfin_can_peripherals, /* Passed to driver */
+	},
+};
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition para_partitions[] = {
 	{
@@ -929,7 +966,7 @@ static struct resource bfin_spi1_resource[] = {
 
 /* SPI controller data */
 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
-	.num_chipselect = 3,
+	.num_chipselect = 4,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
@@ -945,7 +982,7 @@ static struct platform_device bf54x_spi_master0 = {
 };
 
 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
-	.num_chipselect = 3,
+	.num_chipselect = 4,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
@@ -1153,6 +1190,11 @@ static struct platform_device *cm_bf548_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&para_flash_device,
 #endif
+
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+	&bfin_can_device,
+#endif
+
 };
 
 static int __init cm_bf548_init(void)
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 6fcfb9187c35..216e26999af9 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -837,8 +837,12 @@ static struct platform_device bfin_atapi_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
 	{
-		.name = "linux kernel(nand)",
+		.name = "bootloader(nand)",
 		.offset = 0,
+		.size = 0x80000,
+	}, {
+		.name = "linux kernel(nand)",
+		.offset = MTDPART_OFS_APPEND,
 		.size = 4 * 1024 * 1024,
 	},
 	{
@@ -849,7 +853,6 @@ static struct mtd_partition partition_info[] = {
 };
 
 static struct bf5xx_nand_platform bf5xx_nand_platform = {
-	.page_size = NFC_PG_SIZE_256,
 	.data_width = NFC_NWIDTH_8,
 	.partitions = partition_info,
 	.nr_partitions = ARRAY_SIZE(partition_info),
@@ -902,7 +905,7 @@ static struct platform_device bf54x_sdh_device = {
 static struct mtd_partition ezkit_partitions[] = {
 	{
 		.name       = "bootloader(nor)",
-		.size       = 0x40000,
+		.size       = 0x80000,
 		.offset     = 0,
 	}, {
 		.name       = "linux kernel(nor)",
@@ -944,7 +947,7 @@ static struct platform_device ezkit_flash_device = {
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
 		.name = "bootloader(spi)",
-		.size = 0x00040000,
+		.size = 0x00080000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
@@ -967,8 +970,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -1024,13 +1027,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_MODE_3,
 	},
 #endif
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 1,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
@@ -1108,7 +1111,7 @@ static struct resource bfin_spi1_resource[] = {
 
 /* SPI controller data */
 static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
-	.num_chipselect = 3,
+	.num_chipselect = 4,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
@@ -1124,7 +1127,7 @@ static struct platform_device bf54x_spi_master0 = {
 };
 
 static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
-	.num_chipselect = 3,
+	.num_chipselect = 4,
 	.enable_dma = 1,  /* master has the ability to do dma transfer */
 	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 };
@@ -1207,6 +1210,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
 		.platform_data = (void *)&adxl34x_info,
 	},
 #endif
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("ad5252", 0x2f),
+	},
+#endif
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c
index 039a6d9d38f3..888b9cc0b822 100644
--- a/arch/blackfin/mach-bf548/dma.c
+++ b/arch/blackfin/mach-bf548/dma.c
@@ -63,6 +63,7 @@ int channel2irq(unsigned int channel)
 		break;
 	case CH_SPORT1_TX:
 		ret_irq = IRQ_SPORT1_TX;
+		break;
 	case CH_SPI0:
 		ret_irq = IRQ_SPI0;
 		break;
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 7d08c7524498..4070079e2c00 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -5,7 +5,7 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
@@ -28,7 +28,7 @@
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
+/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */
 #define ANOMALY_05000220 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
@@ -210,10 +210,16 @@
 #define ANOMALY_05000473 (1)
 /* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */
 #define ANOMALY_05000474 (1)
-/* Core Hang With L2/L3 Configured in Writeback Cache Mode */
-#define ANOMALY_05000475 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
+#define ANOMALY_05000483 (1)
+/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
+#define ANOMALY_05000485 (__SILICON_REVISION__ >= 2)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -229,6 +235,7 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
@@ -263,5 +270,6 @@
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
index 32f71e6a7c15..deaf5d6542d5 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
@@ -40,6 +40,8 @@
 
 /* SIC Registers */
 
+#define bfin_read_SIC_RVECT()		bfin_read32(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)	bfin_write32(SIC_RVECT, val)
 #define bfin_read_SIC_IMASK0()		bfin_read32(SIC_IMASK0)
 #define bfin_write_SIC_IMASK0(val)	bfin_write32(SIC_IMASK0, val)
 #define bfin_read_SIC_IMASK1()		bfin_read32(SIC_IMASK1)
@@ -301,10 +303,10 @@
 
 /* DMAC0 Registers */
 
-#define bfin_read_DMAC0_TCPER()		bfin_read16(DMAC0_TCPER)
-#define bfin_write_DMAC0_TCPER(val)	bfin_write16(DMAC0_TCPER, val)
-#define bfin_read_DMAC0_TCCNT()		bfin_read16(DMAC0_TCCNT)
-#define bfin_write_DMAC0_TCCNT(val)	bfin_write16(DMAC0_TCCNT, val)
+#define bfin_read_DMAC0_TC_PER()		bfin_read16(DMAC0_TC_PER)
+#define bfin_write_DMAC0_TC_PER(val)	bfin_write16(DMAC0_TC_PER, val)
+#define bfin_read_DMAC0_TC_CNT()		bfin_read16(DMAC0_TC_CNT)
+#define bfin_write_DMAC0_TC_CNT(val)	bfin_write16(DMAC0_TC_CNT, val)
 
 /* DMA Channel 0 Registers */
 
@@ -1155,10 +1157,10 @@
 
 /* DMAC1 Registers */
 
-#define bfin_read_DMAC1_TCPER()			bfin_read16(DMAC1_TCPER)
-#define bfin_write_DMAC1_TCPER(val)		bfin_write16(DMAC1_TCPER, val)
-#define bfin_read_DMAC1_TCCNT()			bfin_read16(DMAC1_TCCNT)
-#define bfin_write_DMAC1_TCCNT(val)		bfin_write16(DMAC1_TCCNT, val)
+#define bfin_read_DMAC1_TC_PER()			bfin_read16(DMAC1_TC_PER)
+#define bfin_write_DMAC1_TC_PER(val)		bfin_write16(DMAC1_TC_PER, val)
+#define bfin_read_DMAC1_TC_CNT()			bfin_read16(DMAC1_TC_CNT)
+#define bfin_write_DMAC1_TC_CNT(val)		bfin_write16(DMAC1_TC_CNT, val)
 
 /* DMA Channel 12 Registers */
 
@@ -2648,61 +2650,5 @@
 /* These need to be last due to the cdef/linux inter-dependencies */
 #include <asm/irq.h>
 
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
-	unsigned long flags, iwr0, iwr1, iwr2;
-
-	if (val == bfin_read_PLL_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr0 = bfin_read32(SIC_IWR0);
-	iwr1 = bfin_read32(SIC_IWR1);
-	iwr2 = bfin_read32(SIC_IWR2);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
-	bfin_write32(SIC_IWR1, 0);
-	bfin_write32(SIC_IWR2, 0);
-
-	bfin_write16(PLL_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR0, iwr0);
-	bfin_write32(SIC_IWR1, iwr1);
-	bfin_write32(SIC_IWR2, iwr2);
-	local_irq_restore_hw(flags);
-}
-
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
-	unsigned long flags, iwr0, iwr1, iwr2;
-
-	if (val == bfin_read_VR_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr0 = bfin_read32(SIC_IWR0);
-	iwr1 = bfin_read32(SIC_IWR1);
-	iwr2 = bfin_read32(SIC_IWR2);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
-	bfin_write32(SIC_IWR1, 0);
-	bfin_write32(SIC_IWR2, 0);
-
-	bfin_write16(VR_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR0, iwr0);
-	bfin_write32(SIC_IWR1, iwr1);
-	bfin_write32(SIC_IWR2, iwr2);
-	local_irq_restore_hw(flags);
-}
-
 #endif /* _CDEF_BF54X_H */
 
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h
index d3bc6d1df547..abf5f750dd8b 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -366,136 +366,6 @@
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
 
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index f916c52a148a..e2771094de02 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -60,15 +60,15 @@
 #define                     TWI1_REGBASE  0xffc02200
 #define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
 #define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
-#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                   TWI1_SLAVE_CTL  0xffc02208   /* TWI Slave Mode Control Register */
 #define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
 #define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
-#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
+#define                  TWI1_MASTER_CTL  0xffc02214   /* TWI Master Mode Control Register */
 #define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
 #define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
 #define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
 #define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
-#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
+#define                    TWI1_FIFO_CTL  0xffc02228   /* TWI FIFO Control Register */
 #define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
 #define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
 #define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 72c343646b2a..be21ba5b3aa8 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -99,15 +99,15 @@
 #define                     TWI1_REGBASE  0xffc02200
 #define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
 #define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
-#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                   TWI1_SLAVE_CTL  0xffc02208   /* TWI Slave Mode Control Register */
 #define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
 #define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
-#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
+#define                  TWI1_MASTER_CTL  0xffc02214   /* TWI Master Mode Control Register */
 #define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
 #define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
 #define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
 #define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
-#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
+#define                    TWI1_FIFO_CTL  0xffc02228   /* TWI FIFO Control Register */
 #define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
 #define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
 #define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
@@ -646,136 +646,6 @@
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
 
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index 0ed06c2366fe..78f91103f175 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -35,6 +35,7 @@
 
 /* SIC Registers */
 
+#define                        SIC_RVECT  0xffc00108
 #define                       SIC_IMASK0  0xffc0010c   /* System Interrupt Mask Register 0 */
 #define                       SIC_IMASK1  0xffc00110   /* System Interrupt Mask Register 1 */
 #define                       SIC_IMASK2  0xffc00114   /* System Interrupt Mask Register 2 */
@@ -105,15 +106,15 @@
 #define                     TWI0_REGBASE  0xffc00700
 #define                      TWI0_CLKDIV  0xffc00700   /* Clock Divider Register */
 #define                     TWI0_CONTROL  0xffc00704   /* TWI Control Register */
-#define                  TWI0_SLAVE_CTRL  0xffc00708   /* TWI Slave Mode Control Register */
+#define                   TWI0_SLAVE_CTL  0xffc00708   /* TWI Slave Mode Control Register */
 #define                  TWI0_SLAVE_STAT  0xffc0070c   /* TWI Slave Mode Status Register */
 #define                  TWI0_SLAVE_ADDR  0xffc00710   /* TWI Slave Mode Address Register */
-#define                 TWI0_MASTER_CTRL  0xffc00714   /* TWI Master Mode Control Register */
+#define                  TWI0_MASTER_CTL  0xffc00714   /* TWI Master Mode Control Register */
 #define                 TWI0_MASTER_STAT  0xffc00718   /* TWI Master Mode Status Register */
 #define                 TWI0_MASTER_ADDR  0xffc0071c   /* TWI Master Mode Address Register */
 #define                    TWI0_INT_STAT  0xffc00720   /* TWI Interrupt Status Register */
 #define                    TWI0_INT_MASK  0xffc00724   /* TWI Interrupt Mask Register */
-#define                   TWI0_FIFO_CTRL  0xffc00728   /* TWI FIFO Control Register */
+#define                    TWI0_FIFO_CTL  0xffc00728   /* TWI FIFO Control Register */
 #define                   TWI0_FIFO_STAT  0xffc0072c   /* TWI FIFO Status Register */
 #define                   TWI0_XMT_DATA8  0xffc00780   /* TWI FIFO Transmit Data Single Byte Register */
 #define                  TWI0_XMT_DATA16  0xffc00784   /* TWI FIFO Transmit Data Double Byte Register */
@@ -198,8 +199,8 @@
 
 /* DMAC0 Registers */
 
-#define                      DMAC0_TCPER  0xffc00b0c   /* DMA Controller 0 Traffic Control Periods Register */
-#define                      DMAC0_TCCNT  0xffc00b10   /* DMA Controller 0 Current Counts Register */
+#define                     DMAC0_TC_PER  0xffc00b0c   /* DMA Controller 0 Traffic Control Periods Register */
+#define                     DMAC0_TC_CNT  0xffc00b10   /* DMA Controller 0 Current Counts Register */
 
 /* DMA Channel 0 Registers */
 
@@ -688,8 +689,8 @@
 
 /* DMAC1 Registers */
 
-#define                      DMAC1_TCPER  0xffc01b0c   /* DMA Controller 1 Traffic Control Periods Register */
-#define                      DMAC1_TCCNT  0xffc01b10   /* DMA Controller 1 Current Counts Register */
+#define                     DMAC1_TC_PER  0xffc01b0c   /* DMA Controller 1 Traffic Control Periods Register */
+#define                     DMAC1_TC_CNT  0xffc01b10   /* DMA Controller 1 Current Counts Register */
 
 /* DMA Channel 12 Registers */
 
@@ -1958,57 +1959,6 @@
 #define                     TRUN6  0x40000000 /* Timer 6 Slave Enable Status */
 #define                     TRUN7  0x80000000 /* Timer 7 Slave Enable Status */
 
-/* Bit masks for CNT_CONFIG */
-
-#define                      CNTE  0x1        /* Counter Enable */
-#define                      DEBE  0x2        /* Debounce Enable */
-#define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   CNTMODE  0x700      /* Counter Operating Mode */
-#define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                   BNDMODE  0x3000     /* Boundary register Mode */
-#define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-
-/* Bit masks for CNT_IMASK */
-
-#define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-
-/* Bit masks for CNT_STATUS */
-
-#define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-
-/* Bit masks for CNT_COMMAND */
-
-#define                    W1LCNT  0xf        /* Load Counter Register */
-#define                    W1LMIN  0xf0       /* Load Min Register */
-#define                    W1LMAX  0xf00      /* Load Max Register */
-#define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-
-/* Bit masks for CNT_DEBOUNCE */
-
-#define                 DPRESCALE  0xf        /* Load Counter Register */
-
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
@@ -2044,66 +1994,6 @@
 #define                RESET_WDOG 0x4000       /* SW Reset Generated By Watchdog Timer */
 #define            RESET_SOFTWARE 0x8000       /* SW Reset Occurred Since Last Read Of SWRST */
 
-/* Bit masks for NFC_CTL */
-
-#define                    WR_DLY  0xf        /* Write Strobe Delay */
-#define                    RD_DLY  0xf0       /* Read Strobe Delay */
-#define                    NWIDTH  0x100      /* NAND Data Width */
-#define                   PG_SIZE  0x200      /* Page Size */
-
-/* Bit masks for NFC_STAT */
-
-#define                     NBUSY  0x1        /* Not Busy */
-#define                   WB_FULL  0x2        /* Write Buffer Full */
-#define                PG_WR_STAT  0x4        /* Page Write Pending */
-#define                PG_RD_STAT  0x8        /* Page Read Pending */
-#define                  WB_EMPTY  0x10       /* Write Buffer Empty */
-
-/* Bit masks for NFC_IRQSTAT */
-
-#define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
-#define                    WB_OVF  0x2        /* Write Buffer Overflow */
-#define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
-#define                    RD_RDY  0x8        /* Read Data Ready */
-#define                   WR_DONE  0x10       /* Page Write Done */
-
-/* Bit masks for NFC_IRQMASK */
-
-#define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
-#define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
-#define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
-#define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
-#define               MASK_WRDONE  0x10       /* Mask Write Done */
-
-/* Bit masks for NFC_RST */
-
-#define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
-
-/* Bit masks for NFC_PGCTL */
-
-#define               PG_RD_START  0x1        /* Page Read Start */
-#define               PG_WR_START  0x2        /* Page Write Start */
-
-/* Bit masks for NFC_ECC0 */
-
-#define                      ECC0  0x7ff      /* Parity Calculation Result0 */
-
-/* Bit masks for NFC_ECC1 */
-
-#define                      ECC1  0x7ff      /* Parity Calculation Result1 */
-
-/* Bit masks for NFC_ECC2 */
-
-#define                      ECC2  0x7ff      /* Parity Calculation Result2 */
-
-/* Bit masks for NFC_ECC3 */
-
-#define                      ECC3  0x7ff      /* Parity Calculation Result3 */
-
-/* Bit masks for NFC_COUNT */
-
-#define                    ECCCNT  0x3ff      /* Transfer Count */
-
 /* Bit masks for EPPIx_STATUS */
 
 #define                 CFIFO_ERR  0x1        /* Chroma FIFO Error */
@@ -2172,56 +2062,6 @@
 #define                  LOW_EVEN  0xff0000   /* Lower Limit for Even Bytes (Luma) */
 #define                 HIGH_EVEN  0xff000000 /* Upper Limit for Even Bytes (Luma) */
 
-/* Bit masks for SPIx_BAUD */
-
-#define                  SPI_BAUD  0xffff     /* Baud Rate */
-
-/* Bit masks for SPIx_CTL */
-
-#define                       SPE  0x4000     /* SPI Enable */
-#define                       WOM  0x2000     /* Write Open Drain Master */
-#define                      MSTR  0x1000     /* Master Mode */
-#define                      CPOL  0x800      /* Clock Polarity */
-#define                      CPHA  0x400      /* Clock Phase */
-#define                      LSBF  0x200      /* LSB First */
-#define                      SIZE  0x100      /* Size of Words */
-#define                     EMISO  0x20       /* Enable MISO Output */
-#define                      PSSE  0x10       /* Slave-Select Enable */
-#define                        GM  0x8        /* Get More Data */
-#define                        SZ  0x4        /* Send Zero */
-#define                     TIMOD  0x3        /* Transfer Initiation Mode */
-
-/* Bit masks for SPIx_FLG */
-
-#define                      FLS1  0x2        /* Slave Select Enable 1 */
-#define                      FLS2  0x4        /* Slave Select Enable 2 */
-#define                      FLS3  0x8        /* Slave Select Enable 3 */
-#define                      FLG1  0x200      /* Slave Select Value 1 */
-#define                      FLG2  0x400      /* Slave Select Value 2 */
-#define                      FLG3  0x800      /* Slave Select Value 3 */
-
-/* Bit masks for SPIx_STAT */
-
-#define                     TXCOL  0x40       /* Transmit Collision Error */
-#define                       RXS  0x20       /* RDBR Data Buffer Status */
-#define                      RBSY  0x10       /* Receive Error */
-#define                       TXS  0x8        /* TDBR Data Buffer Status */
-#define                       TXE  0x4        /* Transmission Error */
-#define                      MODF  0x2        /* Mode Fault Error */
-#define                      SPIF  0x1        /* SPI Finished */
-
-/* Bit masks for SPIx_TDBR */
-
-#define                      TDBR  0xffff     /* Transmit Data Buffer */
-
-/* Bit masks for SPIx_RDBR */
-
-#define                      RDBR  0xffff     /* Receive Data Buffer */
-
-/* Bit masks for SPIx_SHADOW */
-
-#define                    SHADOW  0xffff     /* RDBR Shadow */
-
 /* ************************************************ */
 /* The TWI bit masks fields are from the ADSP-BF538 */
 /* and they have not been verified as the final     */
@@ -2332,73 +2172,6 @@
 
 #define                 RCVDATA16  0xffff     /* Receive FIFO 16-Bit Data */
 
-/* Bit masks for SPORTx_TCR1 */
-
-#define                     TCKFE  0x4000     /* Clock Falling Edge Select */
-#define                     LATFS  0x2000     /* Late Transmit Frame Sync */
-#define                      LTFS  0x1000     /* Low Transmit Frame Sync Select */
-#define                     DITFS  0x800      /* Data-Independent Transmit Frame Sync Select */
-#define                      TFSR  0x400      /* Transmit Frame Sync Required Select */
-#define                      ITFS  0x200      /* Internal Transmit Frame Sync Select */
-#define                    TLSBIT  0x10       /* Transmit Bit Order */
-#define                    TDTYPE  0xc        /* Data Formatting Type Select */
-#define                     ITCLK  0x2        /* Internal Transmit Clock Select */
-#define                     TSPEN  0x1        /* Transmit Enable */
-
-/* Bit masks for SPORTx_TCR2 */
-
-#define                     TRFST  0x400      /* Left/Right Order */
-#define                     TSFSE  0x200      /* Transmit Stereo Frame Sync Enable */
-#define                      TXSE  0x100      /* TxSEC Enable */
-#define                    SLEN_T  0x1f       /* SPORT Word Length */
-
-/* Bit masks for SPORTx_RCR1 */
-
-#define                     RCKFE  0x4000     /* Clock Falling Edge Select */
-#define                     LARFS  0x2000     /* Late Receive Frame Sync */
-#define                      LRFS  0x1000     /* Low Receive Frame Sync Select */
-#define                      RFSR  0x400      /* Receive Frame Sync Required Select */
-#define                      IRFS  0x200      /* Internal Receive Frame Sync Select */
-#define                    RLSBIT  0x10       /* Receive Bit Order */
-#define                    RDTYPE  0xc        /* Data Formatting Type Select */
-#define                     IRCLK  0x2        /* Internal Receive Clock Select */
-#define                     RSPEN  0x1        /* Receive Enable */
-
-/* Bit masks for SPORTx_RCR2 */
-
-#define                     RRFST  0x400      /* Left/Right Order */
-#define                     RSFSE  0x200      /* Receive Stereo Frame Sync Enable */
-#define                      RXSE  0x100      /* RxSEC Enable */
-#define                    SLEN_R  0x1f       /* SPORT Word Length */
-
-/* Bit masks for SPORTx_STAT */
-
-#define                     TXHRE  0x40       /* Transmit Hold Register Empty */
-#define                      TOVF  0x20       /* Sticky Transmit Overflow Status */
-#define                      TUVF  0x10       /* Sticky Transmit Underflow Status */
-#define                       TXF  0x8        /* Transmit FIFO Full Status */
-#define                      ROVF  0x4        /* Sticky Receive Overflow Status */
-#define                      RUVF  0x2        /* Sticky Receive Underflow Status */
-#define                      RXNE  0x1        /* Receive FIFO Not Empty Status */
-
-/* Bit masks for SPORTx_MCMC1 */
-
-#define                  SP_WSIZE  0xf000     /* Window Size */
-#define                   SP_WOFF  0x3ff      /* Windows Offset */
-
-/* Bit masks for SPORTx_MCMC2 */
-
-#define                       MFD  0xf000     /* Multi channel Frame Delay */
-#define                      FSDR  0x80       /* Frame Sync to Data Relationship */
-#define                  MCMEN  0x10       /* Multi channel Frame Mode Enable */
-#define                   MCDRXPE  0x8        /* Multi channel DMA Receive Packing */
-#define                   MCDTXPE  0x4        /* Multi channel DMA Transmit Packing */
-#define                     MCCRM  0x3        /* 2X Clock Recovery Mode */
-
-/* Bit masks for SPORTx_CHNL */
-
-#define                  CUR_CHNL  0x3ff      /* Current Channel Indicator */
-
 /* Bit masks for UARTx_LCR */
 
 #if 0
@@ -2472,33 +2245,6 @@
 #define BCODE_QUICKBOOT 0x0020  /* always perform quick boot */
 #define BCODE_NOBOOT    0x0030  /* always perform full boot */
 
-/* CNT_COMMAND bit field options */
-
-#define W1LCNT_ZERO   0x0001   /* write 1 to load CNT_COUNTER with zero */
-#define W1LCNT_MIN    0x0004   /* write 1 to load CNT_COUNTER from CNT_MIN */
-#define W1LCNT_MAX    0x0008   /* write 1 to load CNT_COUNTER from CNT_MAX */
-
-#define W1LMIN_ZERO   0x0010   /* write 1 to load CNT_MIN with zero */
-#define W1LMIN_CNT    0x0020   /* write 1 to load CNT_MIN from CNT_COUNTER */
-#define W1LMIN_MAX    0x0080   /* write 1 to load CNT_MIN from CNT_MAX */
-
-#define W1LMAX_ZERO   0x0100   /* write 1 to load CNT_MAX with zero */
-#define W1LMAX_CNT    0x0200   /* write 1 to load CNT_MAX from CNT_COUNTER */
-#define W1LMAX_MIN    0x0400   /* write 1 to load CNT_MAX from CNT_MIN */
-
-/* CNT_CONFIG bit field options */
-
-#define CNTMODE_QUADENC  0x0000  /* quadrature encoder mode */
-#define CNTMODE_BINENC   0x0100  /* binary encoder mode */
-#define CNTMODE_UDCNT    0x0200  /* up/down counter mode */
-#define CNTMODE_DIRCNT   0x0400  /* direction counter mode */
-#define CNTMODE_DIRTMR   0x0500  /* direction timer mode */
-
-#define BNDMODE_COMP     0x0000  /* boundary compare mode */
-#define BNDMODE_ZERO     0x1000  /* boundary compare and zero mode */
-#define BNDMODE_CAPT     0x2000  /* boundary capture mode */
-#define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
-
 /* TMODE in TIMERx_CONFIG bit field options */
 
 #define PWM_OUT  0x0001
diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h
index 850e39d193e3..28037e331964 100644
--- a/arch/blackfin/mach-bf548/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf548/include/mach/gpio.h
@@ -3,6 +3,10 @@
  * Licensed under the GPL-2 or later.
  */
 
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
 #define GPIO_PA0	0
 #define GPIO_PA1	1
 #define GPIO_PA2	2
@@ -166,6 +170,8 @@
 
 #define MAX_BLACKFIN_GPIOS 160
 
+#ifndef __ASSEMBLY__
+
 struct gpio_port_t {
 	unsigned short port_fer;
 	unsigned short dummy1;
@@ -191,3 +197,7 @@ struct gpio_port_s {
 	unsigned short inen;
 	unsigned int mux;
 };
+
+#endif
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/mach-bf548/include/mach/pll.h b/arch/blackfin/mach-bf548/include/mach/pll.h
new file mode 100644
index 000000000000..7865a090d333
--- /dev/null
+++ b/arch/blackfin/mach-bf548/include/mach/pll.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_PLL_H
+#define _MACH_PLL_H
+
+#include <asm/blackfin.h>
+#include <asm/irqflags.h>
+
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1, iwr2;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	iwr2 = bfin_read32(SIC_IWR2);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+	bfin_write32(SIC_IWR2, 0);
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	bfin_write32(SIC_IWR2, iwr2);
+	hard_local_irq_restore(flags);
+}
+
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1, iwr2;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SIC_IWR0);
+	iwr1 = bfin_read32(SIC_IWR1);
+	iwr2 = bfin_read32(SIC_IWR2);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+	bfin_write32(SIC_IWR1, 0);
+	bfin_write32(SIC_IWR2, 0);
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR0, iwr0);
+	bfin_write32(SIC_IWR1, iwr1);
+	bfin_write32(SIC_IWR2, iwr2);
+	hard_local_irq_restore(flags);
+}
+
+#endif /* _MACH_PLL_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index 89ad6a886362..e22246202730 100644
--- a/arch/blackfin/mach-bf548/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
 
 #define P_SPORT2_TFS	(P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
 #define P_SPORT2_DTSEC	(P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
@@ -131,6 +131,7 @@
 #define P_KEY_COL2	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
 #define P_KEY_COL3	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
 
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PE4
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 #define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
 #define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index bfcfa86db2b5..0b1c20f14fe0 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -284,6 +284,7 @@ static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
 
 static struct platform_nand_data bfin_plat_nand_data = {
 	.chip = {
+		 .nr_chips = 1,
 		 .chip_delay = 30,
 #ifdef CONFIG_MTD_PARTITIONS
 		 .part_probe_types = part_probes,
@@ -301,7 +302,7 @@ static struct platform_nand_data bfin_plat_nand_data = {
 static struct resource bfin_plat_nand_resources = {
 	.start = 0x24000000,
 	.end = 0x24000000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
-	.flags = IORESOURCE_IO,
+	.flags = IORESOURCE_MEM,
 };
 
 static struct platform_device bfin_async_nand_device = {
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index e127aedc1d7f..087b6b05cc73 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -72,7 +72,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -111,12 +111,12 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
 		.controller_data = &ad1836_spi_chip_info,
 	},
 #endif
@@ -278,7 +278,7 @@ static struct resource isp1362_hcd_resources[] = {
 	}, {
 		.start = IRQ_PF47,
 		.end = IRQ_PF47,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 9b93e2f95791..ab7a487975fd 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -14,6 +14,7 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
@@ -74,7 +75,7 @@ static struct resource isp1362_hcd_resources[] = {
 	}, {
 		.start = IRQ_PF8,
 		.end = IRQ_PF8,
-		.flags = IORESOURCE_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
 
@@ -274,8 +275,8 @@ static struct platform_device ezkit_flash_device = {
 };
 #endif
 
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 	.enable_dma = 0,
 	.bits_per_word = 16,
@@ -328,14 +329,16 @@ static struct platform_device bfin_spi0_device = {
 #endif
 
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SND_BLACKFIN_AD183X) \
-	|| defined(CONFIG_SND_BLACKFIN_AD183X_MODULE)
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
+	|| defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 	{
-		.modalias = "ad1836",
+		.modalias = "ad183x",
 		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.chip_select = 4,
+		.platform_data = "ad1836", /* only includes chip name for the moment */
 		.controller_data = &ad1836_spi_chip_info,
+		.mode = SPI_MODE_3,
 	},
 #endif
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
@@ -377,8 +380,8 @@ static struct platform_device bfin_device_gpiokeys = {
 #include <linux/i2c-gpio.h>
 
 static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.sda_pin		= 1,
-	.scl_pin		= 0,
+	.sda_pin		= GPIO_PF1,
+	.scl_pin		= GPIO_PF0,
 	.sda_is_open_drain	= 0,
 	.scl_is_open_drain	= 0,
 	.udelay			= 40,
@@ -420,6 +423,30 @@ static struct platform_device bfin_dpmc = {
 	},
 };
 
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+static struct platform_device bfin_i2s = {
+	.name = "bfin-i2s",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+static struct platform_device bfin_tdm = {
+	.name = "bfin-tdm",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+static struct platform_device bfin_ac97 = {
+	.name = "bfin-ac97",
+	.id = CONFIG_SND_BF5XX_SPORT_NUM,
+	/* TODO: add platform data here */
+};
+#endif
+
 static struct platform_device *ezkit_devices[] __initdata = {
 
 	&bfin_dpmc,
@@ -467,6 +494,18 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezkit_flash_device,
 #endif
+
+#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+	&bfin_i2s,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
+	&bfin_tdm,
+#endif
+
+#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+	&bfin_ac97,
+#endif
 };
 
 static int __init ezkit_init(void)
@@ -484,6 +523,17 @@ static int __init ezkit_init(void)
 	SSYNC();
 #endif
 
+#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+	bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15));
+	bfin_write_FIO0_FLAG_S(1 << 15);
+	SSYNC();
+	/*
+	 * This initialization lasts for approximately 4500 MCLKs.
+	 * MCLK = 12.288MHz
+	 */
+	udelay(400);
+#endif
+
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 	return 0;
 }
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index deb2271d09a3..78ecb50bafc8 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -18,9 +18,9 @@
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 
-#define CMD_COREB_START		2
-#define CMD_COREB_STOP		3
-#define CMD_COREB_RESET		4
+#define CMD_COREB_START		_IO('b', 0)
+#define CMD_COREB_STOP		_IO('b', 1)
+#define CMD_COREB_RESET		_IO('b', 2)
 
 static long
 coreb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -29,10 +29,10 @@ coreb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	switch (cmd) {
 	case CMD_COREB_START:
-		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~0x0020);
+		bfin_write_SYSCR(bfin_read_SYSCR() & ~0x0020);
 		break;
 	case CMD_COREB_STOP:
-		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() | 0x0020);
+		bfin_write_SYSCR(bfin_read_SYSCR() | 0x0020);
 		bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080);
 		break;
 	case CMD_COREB_RESET:
@@ -51,6 +51,7 @@ coreb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 static const struct file_operations coreb_fops = {
 	.owner          = THIS_MODULE,
 	.unlocked_ioctl = coreb_ioctl,
+	.llseek		= noop_llseek,
 };
 
 static struct miscdevice coreb_dev = {
@@ -73,3 +74,4 @@ module_exit(bf561_coreb_exit);
 
 MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
 MODULE_DESCRIPTION("BF561 Core B Support");
+MODULE_LICENSE("GPL");
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 5ddc981e9937..4c108c99cb6e 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -5,7 +5,7 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
@@ -152,8 +152,8 @@
 #define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
 /* NMI Event at Boot Time Results in Unpredictable State */
 #define ANOMALY_05000219 (__SILICON_REVISION__ < 5)
-/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
-#define ANOMALY_05000220 (__SILICON_REVISION__ < 5)
+/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000220 (__SILICON_REVISION__ < 4)
 /* Incorrect Pulse-Width of UART Start Bit */
 #define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
 /* Scratchpad Memory Bank Reads May Return Incorrect Data */
@@ -290,10 +290,14 @@
 #define ANOMALY_05000461 (1)
 /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
 #define ANOMALY_05000473 (1)
-/* Core Hang With L2/L3 Configured in Writeback Cache Mode */
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
 #define ANOMALY_05000475 (__SILICON_REVISION__ < 4)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000119 (0)
@@ -319,5 +323,6 @@
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
 #define ANOMALY_05000474 (0)
+#define ANOMALY_05000485 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h
index 67d6bdcd3fa8..6c7dc58c018c 100644
--- a/arch/blackfin/mach-bf561/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h
@@ -24,29 +24,16 @@
 #define bfin_read_FIO_INEN() bfin_read_FIO0_INEN()
 #define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val)
 
-#define SIC_IWR0 SICA_IWR0
-#define SIC_IWR1 SICA_IWR1
-#define SIC_IAR0 SICA_IAR0
-#define bfin_write_SIC_IMASK0 bfin_write_SICA_IMASK0
-#define bfin_write_SIC_IMASK1 bfin_write_SICA_IMASK1
-#define bfin_write_SIC_IWR0   bfin_write_SICA_IWR0
-#define bfin_write_SIC_IWR1   bfin_write_SICA_IWR1
-
-#define bfin_read_SIC_IMASK0 bfin_read_SICA_IMASK0
-#define bfin_read_SIC_IMASK1 bfin_read_SICA_IMASK1
-#define bfin_read_SIC_IWR0   bfin_read_SICA_IWR0
-#define bfin_read_SIC_IWR1   bfin_read_SICA_IWR1
-#define bfin_read_SIC_ISR0   bfin_read_SICA_ISR0
-#define bfin_read_SIC_ISR1   bfin_read_SICA_ISR1
-
-#define bfin_read_SIC_IMASK(x)		bfin_read32(SICA_IMASK0 + (x << 2))
-#define bfin_write_SIC_IMASK(x, val)	bfin_write32((SICA_IMASK0 + (x << 2)), val)
-#define bfin_read_SICB_IMASK(x)		bfin_read32(SICB_IMASK0 + (x << 2))
-#define bfin_write_SICB_IMASK(x, val)	bfin_write32((SICB_IMASK0 + (x << 2)), val)
-#define bfin_read_SIC_ISR(x)		bfin_read32(SICA_ISR0 + (x << 2))
-#define bfin_write_SIC_ISR(x, val)	bfin_write32((SICA_ISR0 + (x << 2)), val)
-#define bfin_read_SICB_ISR(x)		bfin_read32(SICB_ISR0 + (x << 2))
-#define bfin_write_SICB_ISR(x, val)	bfin_write32((SICB_ISR0 + (x << 2)), val)
+/* Weird muxer funcs which pick SIC regs from IMASK base */
+#define __SIC_MUX(base, x)		((base) + ((x) << 2))
+#define bfin_read_SIC_IMASK(x)		bfin_read32(__SIC_MUX(SIC_IMASK0, x))
+#define bfin_write_SIC_IMASK(x, val)	bfin_write32(__SIC_MUX(SIC_IMASK0, x), val)
+#define bfin_read_SICB_IMASK(x)		bfin_read32(__SIC_MUX(SICB_IMASK0, x))
+#define bfin_write_SICB_IMASK(x, val)	bfin_write32(__SIC_MUX(SICB_IMASK0, x), val)
+#define bfin_read_SIC_ISR(x)		bfin_read32(__SIC_MUX(SIC_ISR0, x))
+#define bfin_write_SIC_ISR(x, val)	bfin_write32(__SIC_MUX(SIC_ISR0, x), val)
+#define bfin_read_SICB_ISR(x)		bfin_read32(__SIC_MUX(SICB_ISR0, x))
+#define bfin_write_SICB_ISR(x, val)	bfin_write32(__SIC_MUX(SICB_ISR0, x), val)
 
 #define BFIN_UART_NR_PORTS      1
 
diff --git a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
index 81ecdb71c6af..2bab99152495 100644
--- a/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
@@ -30,49 +30,41 @@
 #define bfin_write_PLL_LOCKCNT(val)          bfin_write16(PLL_LOCKCNT,val)
 #define bfin_read_CHIPID()                   bfin_read32(CHIPID)
 
-/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
-#define bfin_read_SWRST()                    bfin_read_SICA_SWRST()
-#define bfin_write_SWRST(val)                bfin_write_SICA_SWRST(val)
-#define bfin_read_SYSCR()                    bfin_read_SICA_SYSCR()
-#define bfin_write_SYSCR(val)                bfin_write_SICA_SYSCR(val)
-
 /* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
-#define bfin_read_SICA_SWRST()               bfin_read16(SICA_SWRST)
-#define bfin_write_SICA_SWRST(val)           bfin_write16(SICA_SWRST,val)
-#define bfin_read_SICA_SYSCR()               bfin_read16(SICA_SYSCR)
-#define bfin_write_SICA_SYSCR(val)           bfin_write16(SICA_SYSCR,val)
-#define bfin_read_SICA_RVECT()               bfin_read16(SICA_RVECT)
-#define bfin_write_SICA_RVECT(val)           bfin_write16(SICA_RVECT,val)
-#define bfin_read_SICA_IMASK()               bfin_read32(SICA_IMASK)
-#define bfin_write_SICA_IMASK(val)           bfin_write32(SICA_IMASK,val)
-#define bfin_read_SICA_IMASK0()              bfin_read32(SICA_IMASK0)
-#define bfin_write_SICA_IMASK0(val)          bfin_write32(SICA_IMASK0,val)
-#define bfin_read_SICA_IMASK1()              bfin_read32(SICA_IMASK1)
-#define bfin_write_SICA_IMASK1(val)          bfin_write32(SICA_IMASK1,val)
-#define bfin_read_SICA_IAR0()                bfin_read32(SICA_IAR0)
-#define bfin_write_SICA_IAR0(val)            bfin_write32(SICA_IAR0,val)
-#define bfin_read_SICA_IAR1()                bfin_read32(SICA_IAR1)
-#define bfin_write_SICA_IAR1(val)            bfin_write32(SICA_IAR1,val)
-#define bfin_read_SICA_IAR2()                bfin_read32(SICA_IAR2)
-#define bfin_write_SICA_IAR2(val)            bfin_write32(SICA_IAR2,val)
-#define bfin_read_SICA_IAR3()                bfin_read32(SICA_IAR3)
-#define bfin_write_SICA_IAR3(val)            bfin_write32(SICA_IAR3,val)
-#define bfin_read_SICA_IAR4()                bfin_read32(SICA_IAR4)
-#define bfin_write_SICA_IAR4(val)            bfin_write32(SICA_IAR4,val)
-#define bfin_read_SICA_IAR5()                bfin_read32(SICA_IAR5)
-#define bfin_write_SICA_IAR5(val)            bfin_write32(SICA_IAR5,val)
-#define bfin_read_SICA_IAR6()                bfin_read32(SICA_IAR6)
-#define bfin_write_SICA_IAR6(val)            bfin_write32(SICA_IAR6,val)
-#define bfin_read_SICA_IAR7()                bfin_read32(SICA_IAR7)
-#define bfin_write_SICA_IAR7(val)            bfin_write32(SICA_IAR7,val)
-#define bfin_read_SICA_ISR0()                bfin_read32(SICA_ISR0)
-#define bfin_write_SICA_ISR0(val)            bfin_write32(SICA_ISR0,val)
-#define bfin_read_SICA_ISR1()                bfin_read32(SICA_ISR1)
-#define bfin_write_SICA_ISR1(val)            bfin_write32(SICA_ISR1,val)
-#define bfin_read_SICA_IWR0()                bfin_read32(SICA_IWR0)
-#define bfin_write_SICA_IWR0(val)            bfin_write32(SICA_IWR0,val)
-#define bfin_read_SICA_IWR1()                bfin_read32(SICA_IWR1)
-#define bfin_write_SICA_IWR1(val)            bfin_write32(SICA_IWR1,val)
+#define bfin_read_SWRST()                    bfin_read16(SWRST)
+#define bfin_write_SWRST(val)                bfin_write16(SWRST,val)
+#define bfin_read_SYSCR()                    bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val)                bfin_write16(SYSCR,val)
+#define bfin_read_SIC_RVECT()                bfin_read16(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val)            bfin_write16(SIC_RVECT,val)
+#define bfin_read_SIC_IMASK0()               bfin_read32(SIC_IMASK0)
+#define bfin_write_SIC_IMASK0(val)           bfin_write32(SIC_IMASK0,val)
+#define bfin_read_SIC_IMASK1()               bfin_read32(SIC_IMASK1)
+#define bfin_write_SIC_IMASK1(val)           bfin_write32(SIC_IMASK1,val)
+#define bfin_read_SIC_IAR0()                 bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val)             bfin_write32(SIC_IAR0,val)
+#define bfin_read_SIC_IAR1()                 bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val)             bfin_write32(SIC_IAR1,val)
+#define bfin_read_SIC_IAR2()                 bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val)             bfin_write32(SIC_IAR2,val)
+#define bfin_read_SIC_IAR3()                 bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val)             bfin_write32(SIC_IAR3,val)
+#define bfin_read_SIC_IAR4()                 bfin_read32(SIC_IAR4)
+#define bfin_write_SIC_IAR4(val)             bfin_write32(SIC_IAR4,val)
+#define bfin_read_SIC_IAR5()                 bfin_read32(SIC_IAR5)
+#define bfin_write_SIC_IAR5(val)             bfin_write32(SIC_IAR5,val)
+#define bfin_read_SIC_IAR6()                 bfin_read32(SIC_IAR6)
+#define bfin_write_SIC_IAR6(val)             bfin_write32(SIC_IAR6,val)
+#define bfin_read_SIC_IAR7()                 bfin_read32(SIC_IAR7)
+#define bfin_write_SIC_IAR7(val)             bfin_write32(SIC_IAR7,val)
+#define bfin_read_SIC_ISR0()                 bfin_read32(SIC_ISR0)
+#define bfin_write_SIC_ISR0(val)             bfin_write32(SIC_ISR0,val)
+#define bfin_read_SIC_ISR1()                 bfin_read32(SIC_ISR1)
+#define bfin_write_SIC_ISR1(val)             bfin_write32(SIC_ISR1,val)
+#define bfin_read_SIC_IWR0()                 bfin_read32(SIC_IWR0)
+#define bfin_write_SIC_IWR0(val)             bfin_write32(SIC_IWR0,val)
+#define bfin_read_SIC_IWR1()                 bfin_read32(SIC_IWR1)
+#define bfin_write_SIC_IWR1(val)             bfin_write32(SIC_IWR1,val)
 
 /* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */
 #define bfin_read_SICB_SWRST()               bfin_read16(SICB_SWRST)
@@ -1534,54 +1526,4 @@
 /* These need to be last due to the cdef/linux inter-dependencies */
 #include <asm/irq.h>
 
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
-	unsigned long flags, iwr0, iwr1;
-
-	if (val == bfin_read_PLL_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr0 = bfin_read32(SICA_IWR0);
-	iwr1 = bfin_read32(SICA_IWR1);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SICA_IWR0, IWR_ENABLE(0));
-	bfin_write32(SICA_IWR1, 0);
-
-	bfin_write16(PLL_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SICA_IWR0, iwr0);
-	bfin_write32(SICA_IWR1, iwr1);
-	local_irq_restore_hw(flags);
-}
-
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
-	unsigned long flags, iwr0, iwr1;
-
-	if (val == bfin_read_VR_CTL())
-		return;
-
-	local_irq_save_hw(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr0 = bfin_read32(SICA_IWR0);
-	iwr1 = bfin_read32(SICA_IWR1);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SICA_IWR0, IWR_ENABLE(0));
-	bfin_write32(SICA_IWR1, 0);
-
-	bfin_write16(VR_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SICA_IWR0, iwr0);
-	bfin_write32(SICA_IWR1, iwr1);
-	local_irq_restore_hw(flags);
-}
-
 #endif				/* _CDEF_BF561_H */
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index 4c8e36b7fb33..79e048d452e0 100644
--- a/arch/blackfin/mach-bf561/include/mach/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -28,32 +28,29 @@
 #define CHIPID                 0xFFC00014       /* Chip ID Register */
 
 /* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
-#define SWRST                   SICA_SWRST
-#define SYSCR                   SICA_SYSCR
 #define DOUBLE_FAULT            (DOUBLE_FAULT_B|DOUBLE_FAULT_A)
 #define RESET_DOUBLE            (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A)
 #define RESET_WDOG              (SWRST_WDT_B|SWRST_WDT_A)
 #define RESET_SOFTWARE          (SWRST_OCCURRED)
 
 /* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
-#define SICA_SWRST              0xFFC00100	/* Software Reset register */
-#define SICA_SYSCR              0xFFC00104	/* System Reset Configuration register */
-#define SICA_RVECT              0xFFC00108	/* SIC Reset Vector Address Register */
-#define SICA_IMASK              0xFFC0010C	/* SIC Interrupt Mask register 0 - hack to fix old tests */
-#define SICA_IMASK0             0xFFC0010C	/* SIC Interrupt Mask register 0 */
-#define SICA_IMASK1             0xFFC00110	/* SIC Interrupt Mask register 1 */
-#define SICA_IAR0               0xFFC00124	/* SIC Interrupt Assignment Register 0 */
-#define SICA_IAR1               0xFFC00128	/* SIC Interrupt Assignment Register 1 */
-#define SICA_IAR2               0xFFC0012C	/* SIC Interrupt Assignment Register 2 */
-#define SICA_IAR3               0xFFC00130	/* SIC Interrupt Assignment Register 3 */
-#define SICA_IAR4               0xFFC00134	/* SIC Interrupt Assignment Register 4 */
-#define SICA_IAR5               0xFFC00138	/* SIC Interrupt Assignment Register 5 */
-#define SICA_IAR6               0xFFC0013C	/* SIC Interrupt Assignment Register 6 */
-#define SICA_IAR7               0xFFC00140	/* SIC Interrupt Assignment Register 7 */
-#define SICA_ISR0               0xFFC00114	/* SIC Interrupt Status register 0 */
-#define SICA_ISR1               0xFFC00118	/* SIC Interrupt Status register 1 */
-#define SICA_IWR0               0xFFC0011C	/* SIC Interrupt Wakeup-Enable register 0 */
-#define SICA_IWR1               0xFFC00120	/* SIC Interrupt Wakeup-Enable register 1 */
+#define SWRST                   0xFFC00100	/* Software Reset register */
+#define SYSCR                   0xFFC00104	/* System Reset Configuration register */
+#define SIC_RVECT               0xFFC00108	/* SIC Reset Vector Address Register */
+#define SIC_IMASK0              0xFFC0010C	/* SIC Interrupt Mask register 0 */
+#define SIC_IMASK1              0xFFC00110	/* SIC Interrupt Mask register 1 */
+#define SIC_IAR0                0xFFC00124	/* SIC Interrupt Assignment Register 0 */
+#define SIC_IAR1                0xFFC00128	/* SIC Interrupt Assignment Register 1 */
+#define SIC_IAR2                0xFFC0012C	/* SIC Interrupt Assignment Register 2 */
+#define SIC_IAR3                0xFFC00130	/* SIC Interrupt Assignment Register 3 */
+#define SIC_IAR4                0xFFC00134	/* SIC Interrupt Assignment Register 4 */
+#define SIC_IAR5                0xFFC00138	/* SIC Interrupt Assignment Register 5 */
+#define SIC_IAR6                0xFFC0013C	/* SIC Interrupt Assignment Register 6 */
+#define SIC_IAR7                0xFFC00140	/* SIC Interrupt Assignment Register 7 */
+#define SIC_ISR0                0xFFC00114	/* SIC Interrupt Status register 0 */
+#define SIC_ISR1                0xFFC00118	/* SIC Interrupt Status register 1 */
+#define SIC_IWR0                0xFFC0011C	/* SIC Interrupt Wakeup-Enable register 0 */
+#define SIC_IWR1                0xFFC00120	/* SIC Interrupt Wakeup-Enable register 1 */
 
 /* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */
 #define SICB_SWRST              0xFFC01100	/* reserved */
@@ -1007,66 +1004,6 @@
 #define IREN_P	0x01
 #define UCEN_P	0x00
 
-/* **********  SERIAL PORT MASKS  ********************** */
-
-/* SPORTx_TCR1 Masks */
-#define TSPEN    0x0001		/* TX enable  */
-#define ITCLK    0x0002		/* Internal TX Clock Select  */
-#define TDTYPE   0x000C		/* TX Data Formatting Select */
-#define TLSBIT   0x0010		/* TX Bit Order */
-#define ITFS     0x0200		/* Internal TX Frame Sync Select  */
-#define TFSR     0x0400		/* TX Frame Sync Required Select  */
-#define DITFS    0x0800		/* Data Independent TX Frame Sync Select  */
-#define LTFS     0x1000		/* Low TX Frame Sync Select  */
-#define LATFS    0x2000		/* Late TX Frame Sync Select  */
-#define TCKFE    0x4000		/* TX Clock Falling Edge Select  */
-
-/* SPORTx_TCR2 Masks */
-#define SLEN	    0x001F	/*TX Word Length  */
-#define TXSE        0x0100	/*TX Secondary Enable */
-#define TSFSE       0x0200	/*TX Stereo Frame Sync Enable */
-#define TRFST       0x0400	/*TX Right-First Data Order  */
-
-/* SPORTx_RCR1 Masks */
-#define RSPEN    0x0001		/* RX enable  */
-#define IRCLK    0x0002		/* Internal RX Clock Select  */
-#define RDTYPE   0x000C		/* RX Data Formatting Select */
-#define RULAW    0x0008		/* u-Law enable  */
-#define RALAW    0x000C		/* A-Law enable  */
-#define RLSBIT   0x0010		/* RX Bit Order */
-#define IRFS     0x0200		/* Internal RX Frame Sync Select  */
-#define RFSR     0x0400		/* RX Frame Sync Required Select  */
-#define LRFS     0x1000		/* Low RX Frame Sync Select  */
-#define LARFS    0x2000		/* Late RX Frame Sync Select  */
-#define RCKFE    0x4000		/* RX Clock Falling Edge Select  */
-
-/* SPORTx_RCR2 Masks */
-#define SLEN	    0x001F	/*RX Word Length  */
-#define RXSE        0x0100	/*RX Secondary Enable */
-#define RSFSE       0x0200	/*RX Stereo Frame Sync Enable */
-#define RRFST       0x0400	/*Right-First Data Order  */
-
-/*SPORTx_STAT Masks */
-#define RXNE		0x0001	/*RX FIFO Not Empty Status */
-#define RUVF	    	0x0002	/*RX Underflow Status */
-#define ROVF		0x0004	/*RX Overflow Status */
-#define TXF		0x0008	/*TX FIFO Full Status */
-#define TUVF         	0x0010	/*TX Underflow Status */
-#define TOVF         	0x0020	/*TX Overflow Status */
-#define TXHRE        	0x0040	/*TX Hold Register Empty */
-
-/*SPORTx_MCMC1 Masks */
-#define SP_WSIZE		0x0000F000	/*Multichannel Window Size Field */
-#define SP_WOFF		0x000003FF	/*Multichannel Window Offset Field */
-
-/*SPORTx_MCMC2 Masks */
-#define MCCRM		0x00000003	/*Multichannel Clock Recovery Mode */
-#define MCDTXPE		0x00000004	/*Multichannel DMA Transmit Packing */
-#define MCDRXPE		0x00000008	/*Multichannel DMA Receive Packing */
-#define MCMEN		0x00000010	/*Multichannel Frame Mode Enable */
-#define FSDR		0x00000080	/*Multichannel Frame Sync to Data Relationship */
-#define MFD		0x0000F000	/*Multichannel Frame Delay    */
-
 /*  *********  PARALLEL PERIPHERAL INTERFACE (PPI) MASKS ****************   */
 
 /*  PPI_CONTROL Masks         */
@@ -1331,63 +1268,6 @@
 #define PF14_P        14
 #define PF15_P        15
 
-/* ***********  SERIAL PERIPHERAL INTERFACE (SPI) MASKS  **************** */
-
-/* SPI_CTL Masks */
-#define TIMOD                  0x00000003	/* Transfer initiation mode and interrupt generation */
-#define SZ                     0x00000004	/* Send Zero (=0) or last (=1) word when TDBR empty. */
-#define GM                     0x00000008	/* When RDBR full, get more (=1) data or discard (=0) incoming Data */
-#define PSSE                   0x00000010	/* Enable (=1) Slave-Select input for Master. */
-#define EMISO                  0x00000020	/* Enable (=1) MISO pin as an output. */
-#define SIZE                   0x00000100	/* Word length (0 => 8 bits, 1 => 16 bits) */
-#define LSBF                   0x00000200	/* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */
-#define CPHA                   0x00000400	/* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */
-#define CPOL                   0x00000800	/* Clock polarity (0 => active-high, 1 => active-low) */
-#define MSTR                   0x00001000	/* Configures SPI as master (=1) or slave (=0) */
-#define WOM                    0x00002000	/* Open drain (=1) data output enable (for MOSI and MISO) */
-#define SPE                    0x00004000	/* SPI module enable (=1), disable (=0) */
-
-/* SPI_FLG Masks */
-#define FLS1                   0x00000002	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
-#define FLS2                   0x00000004	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLS3                   0x00000008	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
-#define FLS4                   0x00000010	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
-#define FLS5                   0x00000020	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
-#define FLS6                   0x00000040	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
-#define FLS7                   0x00000080	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
-#define FLG1                   0x00000200	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
-#define FLG2                   0x00000400	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLG3                   0x00000800	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
-#define FLG4                   0x00001000	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
-#define FLG5                   0x00002000	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
-#define FLG6                   0x00004000	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
-#define FLG7                   0x00008000	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
-
-/* SPI_FLG Bit Positions */
-#define FLS1_P                 0x00000001	/* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */
-#define FLS2_P                 0x00000002	/* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLS3_P                 0x00000003	/* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */
-#define FLS4_P                 0x00000004	/* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */
-#define FLS5_P                 0x00000005	/* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */
-#define FLS6_P                 0x00000006	/* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */
-#define FLS7_P                 0x00000007	/* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */
-#define FLG1_P                 0x00000009	/* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select  */
-#define FLG2_P                 0x0000000A	/* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */
-#define FLG3_P                 0x0000000B	/* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select  */
-#define FLG4_P                 0x0000000C	/* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select  */
-#define FLG5_P                 0x0000000D	/* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select  */
-#define FLG6_P                 0x0000000E	/* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select  */
-#define FLG7_P                 0x0000000F	/* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */
-
-/* SPI_STAT Masks */
-#define SPIF                   0x00000001	/* Set (=1) when SPI single-word transfer complete */
-#define MODF                   0x00000002	/* Set (=1) in a master device when some other device tries to become master */
-#define TXE                    0x00000004	/* Set (=1) when transmission occurs with no new data in SPI_TDBR */
-#define TXS                    0x00000008	/* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */
-#define RBSY                   0x00000010	/* Set (=1) when data is received with RDBR full */
-#define RXS                    0x00000020	/* SPI_RDBR Data Buffer Status (0=Empty, 1=Full)  */
-#define TXCOL                  0x00000040	/* When set (=1), corrupt data may have been transmitted  */
-
 /* *********************  ASYNCHRONOUS MEMORY CONTROLLER MASKS  ************* */
 
 /* AMGCTL Masks */
diff --git a/arch/blackfin/mach-bf561/include/mach/gpio.h b/arch/blackfin/mach-bf561/include/mach/gpio.h
index a651a8cf805f..4f8aa5d08802 100644
--- a/arch/blackfin/mach-bf561/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf561/include/mach/gpio.h
@@ -9,54 +9,54 @@
 
 #define MAX_BLACKFIN_GPIOS 48
 
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PF16	16
-#define	GPIO_PF17	17
-#define	GPIO_PF18	18
-#define	GPIO_PF19	19
-#define	GPIO_PF20	20
-#define	GPIO_PF21	21
-#define	GPIO_PF22	22
-#define	GPIO_PF23	23
-#define	GPIO_PF24	24
-#define	GPIO_PF25	25
-#define	GPIO_PF26	26
-#define	GPIO_PF27	27
-#define	GPIO_PF28	28
-#define	GPIO_PF29	29
-#define	GPIO_PF30	30
-#define	GPIO_PF31	31
-#define	GPIO_PF32	32
-#define	GPIO_PF33	33
-#define	GPIO_PF34	34
-#define	GPIO_PF35	35
-#define	GPIO_PF36	36
-#define	GPIO_PF37	37
-#define	GPIO_PF38	38
-#define	GPIO_PF39	39
-#define	GPIO_PF40	40
-#define	GPIO_PF41	41
-#define	GPIO_PF42	42
-#define	GPIO_PF43	43
-#define	GPIO_PF44	44
-#define	GPIO_PF45	45
-#define	GPIO_PF46	46
-#define	GPIO_PF47	47
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PF16	16
+#define GPIO_PF17	17
+#define GPIO_PF18	18
+#define GPIO_PF19	19
+#define GPIO_PF20	20
+#define GPIO_PF21	21
+#define GPIO_PF22	22
+#define GPIO_PF23	23
+#define GPIO_PF24	24
+#define GPIO_PF25	25
+#define GPIO_PF26	26
+#define GPIO_PF27	27
+#define GPIO_PF28	28
+#define GPIO_PF29	29
+#define GPIO_PF30	30
+#define GPIO_PF31	31
+#define GPIO_PF32	32
+#define GPIO_PF33	33
+#define GPIO_PF34	34
+#define GPIO_PF35	35
+#define GPIO_PF36	36
+#define GPIO_PF37	37
+#define GPIO_PF38	38
+#define GPIO_PF39	39
+#define GPIO_PF40	40
+#define GPIO_PF41	41
+#define GPIO_PF42	42
+#define GPIO_PF43	43
+#define GPIO_PF44	44
+#define GPIO_PF45	45
+#define GPIO_PF46	46
+#define GPIO_PF47	47
 
 #define PORT_FIO0 GPIO_0
 #define PORT_FIO1 GPIO_16
diff --git a/arch/blackfin/mach-bf561/include/mach/pll.h b/arch/blackfin/mach-bf561/include/mach/pll.h
new file mode 100644
index 000000000000..f2b1fbdb8e72
--- /dev/null
+++ b/arch/blackfin/mach-bf561/include/mach/pll.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2005-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _MACH_PLL_H
+#define _MACH_PLL_H
+
+#include <asm/blackfin.h>
+#include <asm/irqflags.h>
+
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SICA_IWR0);
+	iwr1 = bfin_read32(SICA_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SICA_IWR0, IWR_ENABLE(0));
+	bfin_write32(SICA_IWR1, 0);
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SICA_IWR0, iwr0);
+	bfin_write32(SICA_IWR1, iwr1);
+	hard_local_irq_restore(flags);
+}
+
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr0, iwr1;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	flags = hard_local_irq_save();
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr0 = bfin_read32(SICA_IWR0);
+	iwr1 = bfin_read32(SICA_IWR1);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SICA_IWR0, IWR_ENABLE(0));
+	bfin_write32(SICA_IWR1, 0);
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SICA_IWR0, iwr0);
+	bfin_write32(SICA_IWR1, iwr1);
+	hard_local_irq_restore(flags);
+}
+
+#endif /* _MACH_PLL_H */
diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h
index 3a7b46bbe849..2339ffd0dde8 100644
--- a/arch/blackfin/mach-bf561/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf561/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
 
 #define P_PPI0_CLK	(P_DONTCARE)
 #define P_PPI0_FS1	(P_DONTCARE)
@@ -91,6 +91,7 @@
 #define P_SPI0_MOSI	(P_DONTCARE)
 #define P_SPI0_MISO	(P_DONTCARE)
 #define P_SPI0_SCK	(P_DONTCARE)
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c
index b4424172ad9e..7ee9262fe132 100644
--- a/arch/blackfin/mach-bf561/ints-priority.c
+++ b/arch/blackfin/mach-bf561/ints-priority.c
@@ -13,7 +13,7 @@
 void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
-	bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+	bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
 			     ((CONFIG_IRQ_DMA1_ERROR - 7) << IRQ_DMA1_ERROR_POS) |
 			     ((CONFIG_IRQ_DMA2_ERROR - 7) << IRQ_DMA2_ERROR_POS) |
 			     ((CONFIG_IRQ_IMDMA_ERROR - 7) << IRQ_IMDMA_ERROR_POS) |
@@ -22,7 +22,7 @@ void __init program_IAR(void)
 			     ((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) |
 			     ((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS));
 
-	bfin_write_SICA_IAR1(((CONFIG_IRQ_SPI_ERROR - 7) << IRQ_SPI_ERROR_POS) |
+	bfin_write_SIC_IAR1(((CONFIG_IRQ_SPI_ERROR - 7) << IRQ_SPI_ERROR_POS) |
 			     ((CONFIG_IRQ_UART_ERROR - 7) << IRQ_UART_ERROR_POS) |
 			     ((CONFIG_IRQ_RESERVED_ERROR - 7) << IRQ_RESERVED_ERROR_POS) |
 			     ((CONFIG_IRQ_DMA1_0 - 7) << IRQ_DMA1_0_POS) |
@@ -31,7 +31,7 @@ void __init program_IAR(void)
 			     ((CONFIG_IRQ_DMA1_3 - 7) << IRQ_DMA1_3_POS) |
 			     ((CONFIG_IRQ_DMA1_4 - 7) << IRQ_DMA1_4_POS));
 
-	bfin_write_SICA_IAR2(((CONFIG_IRQ_DMA1_5 - 7) << IRQ_DMA1_5_POS) |
+	bfin_write_SIC_IAR2(((CONFIG_IRQ_DMA1_5 - 7) << IRQ_DMA1_5_POS) |
 			     ((CONFIG_IRQ_DMA1_6 - 7) << IRQ_DMA1_6_POS) |
 			     ((CONFIG_IRQ_DMA1_7 - 7) << IRQ_DMA1_7_POS) |
 			     ((CONFIG_IRQ_DMA1_8 - 7) << IRQ_DMA1_8_POS) |
@@ -40,7 +40,7 @@ void __init program_IAR(void)
 			     ((CONFIG_IRQ_DMA1_11 - 7) << IRQ_DMA1_11_POS) |
 			     ((CONFIG_IRQ_DMA2_0 - 7) << IRQ_DMA2_0_POS));
 
-	bfin_write_SICA_IAR3(((CONFIG_IRQ_DMA2_1 - 7) << IRQ_DMA2_1_POS) |
+	bfin_write_SIC_IAR3(((CONFIG_IRQ_DMA2_1 - 7) << IRQ_DMA2_1_POS) |
 			     ((CONFIG_IRQ_DMA2_2 - 7) << IRQ_DMA2_2_POS) |
 			     ((CONFIG_IRQ_DMA2_3 - 7) << IRQ_DMA2_3_POS) |
 			     ((CONFIG_IRQ_DMA2_4 - 7) << IRQ_DMA2_4_POS) |
@@ -49,7 +49,7 @@ void __init program_IAR(void)
 			     ((CONFIG_IRQ_DMA2_7 - 7) << IRQ_DMA2_7_POS) |
 			     ((CONFIG_IRQ_DMA2_8 - 7) << IRQ_DMA2_8_POS));
 
-	bfin_write_SICA_IAR4(((CONFIG_IRQ_DMA2_9 - 7) << IRQ_DMA2_9_POS) |
+	bfin_write_SIC_IAR4(((CONFIG_IRQ_DMA2_9 - 7) << IRQ_DMA2_9_POS) |
 			     ((CONFIG_IRQ_DMA2_10 - 7) << IRQ_DMA2_10_POS) |
 			     ((CONFIG_IRQ_DMA2_11 - 7) << IRQ_DMA2_11_POS) |
 			     ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
@@ -58,7 +58,7 @@ void __init program_IAR(void)
 			     ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
 			     ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS));
 
-	bfin_write_SICA_IAR5(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+	bfin_write_SIC_IAR5(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
 			     ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
 			     ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
 			     ((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) |
@@ -67,7 +67,7 @@ void __init program_IAR(void)
 			     ((CONFIG_IRQ_TIMER11 - 7) << IRQ_TIMER11_POS) |
 			     ((CONFIG_IRQ_PROG0_INTA - 7) << IRQ_PROG0_INTA_POS));
 
-	bfin_write_SICA_IAR6(((CONFIG_IRQ_PROG0_INTB - 7) << IRQ_PROG0_INTB_POS) |
+	bfin_write_SIC_IAR6(((CONFIG_IRQ_PROG0_INTB - 7) << IRQ_PROG0_INTB_POS) |
 			     ((CONFIG_IRQ_PROG1_INTA - 7) << IRQ_PROG1_INTA_POS) |
 			     ((CONFIG_IRQ_PROG1_INTB - 7) << IRQ_PROG1_INTB_POS) |
 			     ((CONFIG_IRQ_PROG2_INTA - 7) << IRQ_PROG2_INTA_POS) |
@@ -76,7 +76,7 @@ void __init program_IAR(void)
 			     ((CONFIG_IRQ_DMA1_WRRD1 - 7) << IRQ_DMA1_WRRD1_POS) |
 			     ((CONFIG_IRQ_DMA2_WRRD0 - 7) << IRQ_DMA2_WRRD0_POS));
 
-	bfin_write_SICA_IAR7(((CONFIG_IRQ_DMA2_WRRD1 - 7) << IRQ_DMA2_WRRD1_POS) |
+	bfin_write_SIC_IAR7(((CONFIG_IRQ_DMA2_WRRD1 - 7) << IRQ_DMA2_WRRD1_POS) |
 			     ((CONFIG_IRQ_IMDMA_WRRD0 - 7) << IRQ_IMDMA_WRRD0_POS) |
 			     ((CONFIG_IRQ_IMDMA_WRRD1 - 7) << IRQ_IMDMA_WRRD1_POS) |
 			     ((CONFIG_IRQ_WDTIMER - 7) << IRQ_WDTIMER_POS) |
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index 3b9a4bf7dacc..f540ed1257d6 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -52,19 +52,19 @@ int __init setup_profiling_timer(unsigned int multiplier) /* not supported */
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/* Clone setup for peripheral interrupt sources from CoreA. */
-	bfin_write_SICB_IMASK0(bfin_read_SICA_IMASK0());
-	bfin_write_SICB_IMASK1(bfin_read_SICA_IMASK1());
+	bfin_write_SICB_IMASK0(bfin_read_SIC_IMASK0());
+	bfin_write_SICB_IMASK1(bfin_read_SIC_IMASK1());
 	SSYNC();
 
 	/* Clone setup for IARs from CoreA. */
-	bfin_write_SICB_IAR0(bfin_read_SICA_IAR0());
-	bfin_write_SICB_IAR1(bfin_read_SICA_IAR1());
-	bfin_write_SICB_IAR2(bfin_read_SICA_IAR2());
-	bfin_write_SICB_IAR3(bfin_read_SICA_IAR3());
-	bfin_write_SICB_IAR4(bfin_read_SICA_IAR4());
-	bfin_write_SICB_IAR5(bfin_read_SICA_IAR5());
-	bfin_write_SICB_IAR6(bfin_read_SICA_IAR6());
-	bfin_write_SICB_IAR7(bfin_read_SICA_IAR7());
+	bfin_write_SICB_IAR0(bfin_read_SIC_IAR0());
+	bfin_write_SICB_IAR1(bfin_read_SIC_IAR1());
+	bfin_write_SICB_IAR2(bfin_read_SIC_IAR2());
+	bfin_write_SICB_IAR3(bfin_read_SIC_IAR3());
+	bfin_write_SICB_IAR4(bfin_read_SIC_IAR4());
+	bfin_write_SICB_IAR5(bfin_read_SIC_IAR5());
+	bfin_write_SICB_IAR6(bfin_read_SIC_IAR6());
+	bfin_write_SICB_IAR7(bfin_read_SIC_IAR7());
 	bfin_write_SICB_IWR0(IWR_DISABLE_ALL);
 	bfin_write_SICB_IWR1(IWR_DISABLE_ALL);
 	SSYNC();
@@ -86,12 +86,12 @@ int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle
 
 	spin_lock(&boot_lock);
 
-	if ((bfin_read_SICA_SYSCR() & COREB_SRAM_INIT) == 0) {
+	if ((bfin_read_SIC_SYSCR() & COREB_SRAM_INIT) == 0) {
 		/* CoreB already running, sending ipi to wakeup it */
 		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0);
 	} else {
 		/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
-		bfin_write_SICA_SYSCR(bfin_read_SICA_SYSCR() & ~COREB_SRAM_INIT);
+		bfin_write_SIC_SYSCR(bfin_read_SIC_SYSCR() & ~COREB_SRAM_INIT);
 		SSYNC();
 	}
 
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 814cb483853b..ff299f24aba0 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -11,4 +11,3 @@ obj-$(CONFIG_CPU_FREQ)    += cpufreq.o
 obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
 obj-$(CONFIG_SMP)         += smp.o
 obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o
-obj-$(CONFIG_DEBUG_ICACHE_CHECK) += irqpanic.o
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index f2ca211a76a0..bceb98126c21 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -1,7 +1,7 @@
 /*
  * Do some checking to make sure things are OK
  *
- * Copyright 2007-2009 Analog Devices Inc.
+ * Copyright 2007-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -47,18 +47,20 @@
 # error "The kernel load address is too high; keep it below 10meg for safety"
 #endif
 
+#if ANOMALY_05000263 && defined(CONFIG_MPU)
+# error the MPU will not function safely while Anomaly 05000263 applies
+#endif
+
 #if ANOMALY_05000448
 # error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
 #endif
 
 /* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
 #if ANOMALY_05000220 && \
-	((defined(CONFIG_BFIN_EXTMEM_WRITEBACK) && !defined(CONFIG_BFIN_L2_DCACHEABLE)) || \
-	 (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK)))
-# error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
+	(defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK))
+# error "Anomaly 05000220 does not allow you to use Write Back cache with L2 or External Memory"
 #endif
 
-#if ANOMALY_05000475 && \
-	(defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK))
-# error "Anomaly 475 does not allow you to use Write Back cache with L2 or External Memory"
+#if ANOMALY_05000491 && !defined(CONFIG_CACHE_FLUSH_L1)
+# error You need IFLUSH in L1 inst while Anomaly 05000491 applies
 #endif
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index ea540318a228..790c767ca95a 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -11,7 +11,11 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 
+#ifdef CONFIG_CACHE_FLUSH_L1
+.section .l1.text
+#else
 .text
+#endif
 
 /* 05000443 - IFLUSH cannot be last instruction in hardware loop */
 #if ANOMALY_05000443
@@ -64,17 +68,6 @@
 
 /* Invalidate all instruction cache lines assocoiated with this memory area */
 ENTRY(_blackfin_icache_flush_range)
-/*
- * Walkaround to avoid loading wrong instruction after invalidating icache
- * and following sequence is met.
- *
- * 1) One instruction address is cached in the instruction cache.
- * 2) This instruction in SDRAM is changed.
- * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
- * 4) This instruction is executed again, but the old one is loaded.
- */
-	P0 = R0;
-	IFLUSH[P0];
 	do_flush IFLUSH
 ENDPROC(_blackfin_icache_flush_range)
 
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 4391d03dc845..f4cf11d362e1 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -134,7 +134,7 @@ static int bfin_target(struct cpufreq_policy *poli,
 
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 		if (cpu == CPUFREQ_CPU) {
-			local_irq_save_hw(flags);
+			flags = hard_local_irq_save();
 			plldiv = (bfin_read_PLL_DIV() & SSEL) |
 						dpm_state_table[index].csel;
 			bfin_write_PLL_DIV(plldiv);
@@ -155,7 +155,7 @@ static int bfin_target(struct cpufreq_policy *poli,
 				loops_per_jiffy = cpufreq_scale(lpj_ref,
 						lpj_ref_freq, freqs.new);
 			}
-			local_irq_restore_hw(flags);
+			hard_local_irq_restore(flags);
 		}
 		/* TODO: just test case for cycles clock source, remove later */
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index b03716896051..9cfdd49a3127 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -17,9 +17,6 @@ ENTRY(_sleep_mode)
 
 	call _set_sic_iwr;
 
-	R0 = 0xFFFF (Z);
-	call _set_rtc_istat;
-
 	P0.H = hi(PLL_CTL);
 	P0.L = lo(PLL_CTL);
 	R1 = W[P0](z);
@@ -65,9 +62,6 @@ ENTRY(_hibernate_mode)
 	call _set_dram_srfs;
 	SSYNC;
 
-	R0 = 0xFFFF (Z);
-	call _set_rtc_istat;
-
 	P0.H = hi(VR_CTL);
 	P0.L = lo(VR_CTL);
 
@@ -95,9 +89,6 @@ ENTRY(_sleep_deeper)
 	call _set_sic_iwr;
 	call _set_dram_srfs;	/* Set SDRAM Self Refresh */
 
-	/* Clear all the interrupts,bits sticky */
-	R0 = 0xFFFF (Z);
-	call _set_rtc_istat;
 	P0.H = hi(PLL_DIV);
 	P0.L = lo(PLL_DIV);
 	R6 = W[P0](z);
@@ -269,21 +260,6 @@ ENTRY(_set_sic_iwr)
 	RTS;
 ENDPROC(_set_sic_iwr)
 
-ENTRY(_set_rtc_istat)
-#ifndef CONFIG_BF561
-	P0.H = hi(RTC_ISTAT);
-	P0.L = lo(RTC_ISTAT);
-	w[P0] = R0.L;
-	SSYNC;
-#elif (ANOMALY_05000371)
-	nop;
-	nop;
-	nop;
-	nop;
-#endif
-	RTS;
-ENDPROC(_set_rtc_istat)
-
 ENTRY(_test_pll_locked)
 	P0.H = hi(PLL_STAT);
 	P0.L = lo(PLL_STAT);
@@ -316,13 +292,7 @@ ENTRY(_do_hibernate)
 #ifdef SIC_IMASK
 	PM_SYS_PUSH(SIC_IMASK)
 #endif
-#ifdef SICA_IMASK0
-	PM_SYS_PUSH(SICA_IMASK0)
-#endif
-#ifdef SICA_IMASK1
-	PM_SYS_PUSH(SICA_IMASK1)
-#endif
-#ifdef SIC_IAR2
+#ifdef SIC_IAR0
 	PM_SYS_PUSH(SIC_IAR0)
 	PM_SYS_PUSH(SIC_IAR1)
 	PM_SYS_PUSH(SIC_IAR2)
@@ -345,17 +315,6 @@ ENTRY(_do_hibernate)
 	PM_SYS_PUSH(SIC_IAR11)
 #endif
 
-#ifdef SICA_IAR0
-	PM_SYS_PUSH(SICA_IAR0)
-	PM_SYS_PUSH(SICA_IAR1)
-	PM_SYS_PUSH(SICA_IAR2)
-	PM_SYS_PUSH(SICA_IAR3)
-	PM_SYS_PUSH(SICA_IAR4)
-	PM_SYS_PUSH(SICA_IAR5)
-	PM_SYS_PUSH(SICA_IAR6)
-	PM_SYS_PUSH(SICA_IAR7)
-#endif
-
 #ifdef SIC_IWR
 	PM_SYS_PUSH(SIC_IWR)
 #endif
@@ -368,12 +327,6 @@ ENTRY(_do_hibernate)
 #ifdef SIC_IWR2
 	PM_SYS_PUSH(SIC_IWR2)
 #endif
-#ifdef SICA_IWR0
-	PM_SYS_PUSH(SICA_IWR0)
-#endif
-#ifdef SICA_IWR1
-	PM_SYS_PUSH(SICA_IWR1)
-#endif
 
 #ifdef PINT0_ASSIGN
 	PM_SYS_PUSH(PINT0_MASK_SET)
@@ -774,12 +727,6 @@ ENTRY(_do_hibernate)
 	PM_SYS_POP(PINT0_MASK_SET)
 #endif
 
-#ifdef SICA_IWR1
-	PM_SYS_POP(SICA_IWR1)
-#endif
-#ifdef SICA_IWR0
-	PM_SYS_POP(SICA_IWR0)
-#endif
 #ifdef SIC_IWR2
 	PM_SYS_POP(SIC_IWR2)
 #endif
@@ -793,17 +740,6 @@ ENTRY(_do_hibernate)
 	PM_SYS_POP(SIC_IWR)
 #endif
 
-#ifdef SICA_IAR0
-	PM_SYS_POP(SICA_IAR7)
-	PM_SYS_POP(SICA_IAR6)
-	PM_SYS_POP(SICA_IAR5)
-	PM_SYS_POP(SICA_IAR4)
-	PM_SYS_POP(SICA_IAR3)
-	PM_SYS_POP(SICA_IAR2)
-	PM_SYS_POP(SICA_IAR1)
-	PM_SYS_POP(SICA_IAR0)
-#endif
-
 #ifdef SIC_IAR8
 	PM_SYS_POP(SIC_IAR11)
 	PM_SYS_POP(SIC_IAR10)
@@ -821,17 +757,11 @@ ENTRY(_do_hibernate)
 #ifdef SIC_IAR3
 	PM_SYS_POP(SIC_IAR3)
 #endif
-#ifdef SIC_IAR2
+#ifdef SIC_IAR0
 	PM_SYS_POP(SIC_IAR2)
 	PM_SYS_POP(SIC_IAR1)
 	PM_SYS_POP(SIC_IAR0)
 #endif
-#ifdef SICA_IMASK1
-	PM_SYS_POP(SICA_IMASK1)
-#endif
-#ifdef SICA_IMASK0
-	PM_SYS_POP(SICA_IMASK0)
-#endif
 #ifdef SIC_IMASK
 	PM_SYS_POP(SIC_IMASK)
 #endif
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index a5847f5d67c7..2ca915ee181f 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -889,6 +889,66 @@ ENTRY(_ret_from_exception)
 	rts;
 ENDPROC(_ret_from_exception)
 
+#if defined(CONFIG_PREEMPT)
+
+ENTRY(_up_to_irq14)
+#if ANOMALY_05000281 || ANOMALY_05000461
+	r0.l = lo(SAFE_USER_INSTRUCTION);
+	r0.h = hi(SAFE_USER_INSTRUCTION);
+	reti = r0;
+#endif
+
+#ifdef CONFIG_DEBUG_HWERR
+	/* enable irq14 & hwerr interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#else
+	/* Only enable irq14 interrupt, until we transition to _evt_evt14 */
+	r0 = (EVT_IVG14 | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+#endif
+	sti r0;
+
+	p0.l = lo(EVT14);
+	p0.h = hi(EVT14);
+	p1.l = _evt_up_evt14;
+	p1.h = _evt_up_evt14;
+	[p0] = p1;
+	csync;
+
+	raise 14;
+1:
+	jump 1b;
+ENDPROC(_up_to_irq14)
+
+ENTRY(_evt_up_evt14)
+#ifdef CONFIG_DEBUG_HWERR
+	r0 = (EVT_IVHW | EVT_IRPTEN | EVT_EVX | EVT_NMI | EVT_RST | EVT_EMU);
+	sti r0;
+#else
+	cli r0;
+#endif
+#ifdef CONFIG_TRACE_IRQFLAGS
+	[--sp] = rets;
+	sp += -12;
+	call _trace_hardirqs_off;
+	sp += 12;
+	rets = [sp++];
+#endif
+	[--sp] = RETI;
+	SP += 4;
+
+	/* restore normal evt14 */
+	p0.l = lo(EVT14);
+	p0.h = hi(EVT14);
+	p1.l = _evt_evt14;
+	p1.h = _evt_evt14;
+	[p0] = p1;
+	csync;
+
+	rts;
+ENDPROC(_evt_up_evt14)
+
+#endif
+
 #ifdef CONFIG_IPIPE
 
 _resume_kernel_from_int:
@@ -902,8 +962,54 @@ _resume_kernel_from_int:
 	( r7:4, p5:3 ) = [sp++];
 	rets = [sp++];
 	rts
+#elif defined(CONFIG_PREEMPT)
+
+_resume_kernel_from_int:
+	/* check preempt_count */
+	r7 = sp;
+	r4.l = lo(ALIGN_PAGE_MASK);
+	r4.h = hi(ALIGN_PAGE_MASK);
+	r7 = r7 & r4;
+	p5 = r7;
+	r7 = [p5 + TI_PREEMPT];
+	cc = r7 == 0x0;
+	if !cc jump .Lreturn_to_kernel;
+.Lneed_schedule:
+	r7 = [p5 + TI_FLAGS];
+	r4.l = lo(_TIF_WORK_MASK);
+	r4.h = hi(_TIF_WORK_MASK);
+	r7 =  r7 & r4;
+	cc = BITTST(r7, TIF_NEED_RESCHED);
+	if !cc jump .Lreturn_to_kernel;
+	/*
+	 * let schedule done at level 15, otherwise sheduled process will run
+	 * at high level and block low level interrupt
+	 */
+	r6 = reti;  /* save reti */
+	r5.l = .Lkernel_schedule;
+	r5.h = .Lkernel_schedule;
+	reti = r5;
+	rti;
+.Lkernel_schedule:
+	[--sp] = rets;
+	sp += -12;
+	pseudo_long_call _preempt_schedule_irq, p4;
+	sp += 12;
+	rets = [sp++];
+
+	[--sp] = rets;
+	sp += -12;
+	/* up to irq14 so that reti after restore_all can return to irq15(kernel) */
+	pseudo_long_call _up_to_irq14, p4;
+	sp += 12;
+	rets = [sp++];
+
+	reti = r6; /* restore reti so that origin process can return to interrupted point */
+
+	jump .Lneed_schedule;
 #else
-#define _resume_kernel_from_int	 2f
+
+#define _resume_kernel_from_int	.Lreturn_to_kernel
 #endif
 
 ENTRY(_return_from_int)
@@ -913,7 +1019,7 @@ ENTRY(_return_from_int)
 	p2.h = hi(ILAT);
 	r0 = [p2];
 	cc = bittst (r0, EVT_IVG15_P);
-	if cc jump 2f;
+	if cc jump .Lreturn_to_kernel;
 
 	/* if not return to user mode, get out */
 	p2.l = lo(IPEND);
@@ -945,7 +1051,7 @@ ENTRY(_return_from_int)
 	STI r0;
 	raise 15;	/* raise evt15 to do signal or reschedule */
 	rti;
-2:
+.Lreturn_to_kernel:
 	rts;
 ENDPROC(_return_from_int)
 
@@ -1628,6 +1734,10 @@ ENTRY(_sys_call_table)
 	.long _sys_rt_tgsigqueueinfo
 	.long _sys_perf_event_open
 	.long _sys_recvmmsg		/* 370 */
+	.long _sys_fanotify_init
+	.long _sys_fanotify_mark
+	.long _sys_prlimit64
+	.long _sys_cacheflush
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index cee62cf4acd4..2df37db3b49b 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -116,7 +116,24 @@ __common_int_entry:
 	cc = r0 == 0;
 	if cc jump .Lcommon_restore_context;
 #else /* CONFIG_IPIPE */
+
+#ifdef CONFIG_PREEMPT
+	r7 = sp;
+	r4.l = lo(ALIGN_PAGE_MASK);
+	r4.h = hi(ALIGN_PAGE_MASK);
+	r7 = r7 & r4;
+	p5 = r7;
+	r7 = [p5 + TI_PREEMPT]; /* get preempt count */
+	r7 += 1;                /* increment it */
+	[p5 + TI_PREEMPT] = r7;
+#endif
 	pseudo_long_call _do_irq, p2;
+
+#ifdef CONFIG_PREEMPT
+	r7 += -1;
+	[p5 + TI_PREEMPT] = r7; /* restore preempt count */
+#endif
+
 	SP += 12;
 #endif /* CONFIG_IPIPE */
 	pseudo_long_call _return_from_int, p2;
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 1c8c4c7245c3..da7e3c63746b 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -132,8 +132,8 @@ static void bfin_ack_noop(unsigned int irq)
 static void bfin_core_mask_irq(unsigned int irq)
 {
 	bfin_irq_flags &= ~(1 << irq);
-	if (!irqs_disabled_hw())
-		local_irq_enable_hw();
+	if (!hard_irqs_disabled())
+		hard_local_irq_enable();
 }
 
 static void bfin_core_unmask_irq(unsigned int irq)
@@ -148,8 +148,8 @@ static void bfin_core_unmask_irq(unsigned int irq)
 	 * local_irq_enable just does "STI bfin_irq_flags", so it's exactly
 	 * what we need.
 	 */
-	if (!irqs_disabled_hw())
-		local_irq_enable_hw();
+	if (!hard_irqs_disabled())
+		hard_local_irq_enable();
 	return;
 }
 
@@ -158,12 +158,12 @@ static void bfin_internal_mask_irq(unsigned int irq)
 	unsigned long flags;
 
 #ifdef CONFIG_BF53x
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
 			     ~(1 << SIC_SYSIRQ(irq)));
 #else
 	unsigned mask_bank, mask_bit;
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	mask_bank = SIC_SYSIRQ(irq) / 32;
 	mask_bit = SIC_SYSIRQ(irq) % 32;
 	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
@@ -173,7 +173,7 @@ static void bfin_internal_mask_irq(unsigned int irq)
 			     ~(1 << mask_bit));
 #endif
 #endif
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 
 #ifdef CONFIG_SMP
@@ -186,12 +186,12 @@ static void bfin_internal_unmask_irq(unsigned int irq)
 	unsigned long flags;
 
 #ifdef CONFIG_BF53x
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
 			     (1 << SIC_SYSIRQ(irq)));
 #else
 	unsigned mask_bank, mask_bit;
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	mask_bank = SIC_SYSIRQ(irq) / 32;
 	mask_bit = SIC_SYSIRQ(irq) % 32;
 #ifdef CONFIG_SMP
@@ -207,7 +207,7 @@ static void bfin_internal_unmask_irq(unsigned int irq)
 			(1 << mask_bit));
 #endif
 #endif
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 
 #ifdef CONFIG_SMP
@@ -264,7 +264,7 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 	break;
 	}
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
 	if (state) {
 		bfin_sic_iwr[bank] |= (1 << bit);
@@ -275,7 +275,7 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 		vr_wakeup  &= ~wakeup;
 	}
 
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 
 	return 0;
 }
@@ -511,7 +511,7 @@ static void bfin_demux_mac_status_irq(unsigned int int_err_irq,
 	int i, irq = 0;
 	u32 status = bfin_read_EMAC_SYSTAT();
 
-	for (i = 0; i < (IRQ_MAC_STMDONE - IRQ_MAC_PHYINT); i++)
+	for (i = 0; i <= (IRQ_MAC_STMDONE - IRQ_MAC_PHYINT); i++)
 		if (status & (1L << i)) {
 			irq = IRQ_MAC_PHYINT + i;
 			break;
@@ -529,8 +529,9 @@ static void bfin_demux_mac_status_irq(unsigned int int_err_irq,
 	} else
 		printk(KERN_ERR
 		       "%s : %s : LINE %d :\nIRQ ?: MAC ERROR"
-		       " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
-		       __func__, __FILE__, __LINE__);
+		       " INTERRUPT ASSERTED BUT NO SOURCE FOUND"
+		       "(EMAC_SYSTAT=0x%X)\n",
+		       __func__, __FILE__, __LINE__, status);
 }
 #endif
 
@@ -1298,7 +1299,7 @@ void do_irq(int vec, struct pt_regs *fp)
 	} else {
 		struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
 		struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
-#if defined(SIC_ISR0) || defined(SICA_ISR0)
+#if defined(SIC_ISR0)
 		unsigned long sic_status[3];
 
 		if (smp_processor_id()) {
@@ -1378,7 +1379,7 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 	if (likely(vec == EVT_IVTMR_P))
 		irq = IRQ_CORETMR;
 	else {
-#if defined(SIC_ISR0) || defined(SICA_ISR0)
+#if defined(SIC_ISR0)
 		unsigned long sic_status[3];
 
 		sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c
deleted file mode 100644
index c6496249e2bc..000000000000
--- a/arch/blackfin/mach-common/irqpanic.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * panic kernel with dump information
- *
- * Copyright 2005-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <asm/blackfin.h>
-
-#define L1_ICACHE_START 0xffa10000
-#define L1_ICACHE_END   0xffa13fff
-
-/*
- * irq_panic - calls panic with string setup
- */
-__attribute__ ((l1_text))
-asmlinkage void irq_panic(int reason, struct pt_regs *regs)
-{
-	unsigned int cmd, tag, ca, cache_hi, cache_lo, *pa;
-	unsigned short i, j, die;
-	unsigned int bad[10][6];
-
-	/* check entire cache for coherency
-	 * Since printk is in cacheable memory,
-	 * don't call it until you have checked everything
-	*/
-
-	die = 0;
-	i = 0;
-
-	/* check icache */
-
-	for (ca = L1_ICACHE_START; ca <= L1_ICACHE_END && i < 10; ca += 32) {
-
-		/* Grab various address bits for the itest_cmd fields                      */
-		cmd = (((ca & 0x3000) << 4) |	/* ca[13:12] for SBNK[1:0]             */
-		       ((ca & 0x0c00) << 16) |	/* ca[11:10] for WAYSEL[1:0]           */
-		       ((ca & 0x3f8)) |	/* ca[09:03] for SET[4:0] and DW[1:0]  */
-		       0);	/* Access Tag, Read access             */
-
-		SSYNC();
-		bfin_write_ITEST_COMMAND(cmd);
-		SSYNC();
-		tag = bfin_read_ITEST_DATA0();
-		SSYNC();
-
-		/* if tag is marked as valid, check it */
-		if (tag & 1) {
-			/* The icache is arranged in 4 groups of 64-bits */
-			for (j = 0; j < 32; j += 8) {
-				cmd = ((((ca + j) & 0x3000) << 4) |	/* ca[13:12] for SBNK[1:0]             */
-				       (((ca + j) & 0x0c00) << 16) |	/* ca[11:10] for WAYSEL[1:0]           */
-				       (((ca + j) & 0x3f8)) |	/* ca[09:03] for SET[4:0] and DW[1:0]  */
-				       4);	/* Access Data, Read access             */
-
-				SSYNC();
-				bfin_write_ITEST_COMMAND(cmd);
-				SSYNC();
-
-				cache_hi = bfin_read_ITEST_DATA1();
-				cache_lo = bfin_read_ITEST_DATA0();
-
-				pa = ((unsigned int *)((tag & 0xffffcc00) |
-						       ((ca + j) & ~(0xffffcc00))));
-
-				/*
-				 * Debugging this, enable
-				 *
-				 * printk("addr: %08x %08x%08x | %08x%08x\n",
-				 *  ((unsigned int *)((tag & 0xffffcc00)  | ((ca+j) & ~(0xffffcc00)))),
-				 *   cache_hi, cache_lo, *(pa+1), *pa);
-				 */
-
-				if (cache_hi != *(pa + 1) || cache_lo != *pa) {
-					/* Since icache is not working, stay out of it, by not printing */
-					die = 1;
-					bad[i][0] = (ca + j);
-					bad[i][1] = cache_hi;
-					bad[i][2] = cache_lo;
-					bad[i][3] = ((tag & 0xffffcc00) |
-					     	((ca + j) & ~(0xffffcc00)));
-					bad[i][4] = *(pa + 1);
-					bad[i][5] = *(pa);
-					i++;
-				}
-			}
-		}
-	}
-	if (die) {
-		printk(KERN_EMERG "icache coherency error\n");
-		for (j = 0; j <= i; j++) {
-			printk(KERN_EMERG
-			    "cache address   : %08x  cache value : %08x%08x\n",
-			     bad[j][0], bad[j][1], bad[j][2]);
-			printk(KERN_EMERG
-			    "physical address: %08x  SDRAM value : %08x%08x\n",
-			     bad[j][3], bad[j][4], bad[j][5]);
-		}
-		panic("icache coherency error");
-	} else
-		printk(KERN_EMERG "icache checked, and OK\n");
-}
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index ea7f95f6bb4c..80884b136a0c 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -25,7 +25,7 @@ void bfin_pm_suspend_standby_enter(void)
 {
 	unsigned long flags;
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 	bfin_pm_standby_setup();
 
 #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
@@ -56,15 +56,16 @@ void bfin_pm_suspend_standby_enter(void)
 	bfin_write_SIC_IWR(IWR_DISABLE_ALL);
 #endif
 
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 }
 
 int bf53x_suspend_l1_mem(unsigned char *memptr)
 {
-	dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH);
-	dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START,
-			L1_DATA_A_LENGTH);
-	dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
+	dma_memcpy_nocache(memptr, (const void *) L1_CODE_START,
+			L1_CODE_LENGTH);
+	dma_memcpy_nocache(memptr + L1_CODE_LENGTH,
+			(const void *) L1_DATA_A_START, L1_DATA_A_LENGTH);
+	dma_memcpy_nocache(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
 			(const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
 	memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
 			L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
@@ -75,10 +76,10 @@ int bf53x_suspend_l1_mem(unsigned char *memptr)
 
 int bf53x_resume_l1_mem(unsigned char *memptr)
 {
-	dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
-	dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
+	dma_memcpy_nocache((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
+	dma_memcpy_nocache((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
 			L1_DATA_A_LENGTH);
-	dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
+	dma_memcpy_nocache((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
 			L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
 	memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
 			L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
@@ -148,12 +149,12 @@ int bfin_pm_suspend_mem_enter(void)
 	wakeup |= GPWE;
 #endif
 
-	local_irq_save_hw(flags);
+	flags = hard_local_irq_save();
 
 	ret = blackfin_dma_suspend();
 
 	if (ret) {
-		local_irq_restore_hw(flags);
+		hard_local_irq_restore(flags);
 		kfree(memptr);
 		return ret;
 	}
@@ -167,7 +168,7 @@ int bfin_pm_suspend_mem_enter(void)
 	_disable_icplb();
 	bf53x_suspend_l1_mem(memptr);
 
-	do_hibernate(wakeup | vr_wakeup);	/* Goodbye */
+	do_hibernate(wakeup | vr_wakeup);	/* See you later! */
 
 	bf53x_resume_l1_mem(memptr);
 
@@ -177,7 +178,7 @@ int bfin_pm_suspend_mem_enter(void)
 	bfin_gpio_pm_hibernate_restore();
 	blackfin_dma_resume();
 
-	local_irq_restore_hw(flags);
+	hard_local_irq_restore(flags);
 	kfree(memptr);
 
 	return 0;
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index bb4e8fff4b55..f8435cd36c7c 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -158,5 +158,8 @@ void __init_refok free_initmem(void)
 	free_init_pages("unused kernel memory",
 			(unsigned long)(&__init_begin),
 			(unsigned long)(&__init_end));
+
+	if (memory_start == (unsigned long)(&__init_end))
+		memory_start = (unsigned long)(&__init_begin);
 #endif
 }
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index e25bf4440b51..613e62831c55 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -1,10 +1,3 @@
-#
-# For a description of the syntax of this configuration file,
-# see the Configure script.
-#
-
-mainmenu "Linux/CRIS Kernel Configuration"
-
 config MMU
 	bool
 	default y
@@ -20,14 +13,11 @@ config RWSEM_GENERIC_SPINLOCK
 config RWSEM_XCHGADD_ALGORITHM
 	bool
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_CMOS_UPDATE
 	def_bool y
 
 config ARCH_USES_GETTIMEOFFSET
-	def_bool y
+	def_bool n
 
 config GENERIC_IOMAP
        bool
@@ -131,16 +121,19 @@ choice
 
 config ETRAX100LX
 	bool "ETRAX-100LX-v1"
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support version 1 of the ETRAX 100LX.
 
 config ETRAX100LX_V2
 	bool "ETRAX-100LX-v2"
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support version 2 of the ETRAX 100LX.
 
 config SVINTO_SIM
 	bool "ETRAX-100LX-for-xsim-simulator"
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support the xsim ETRAX Simulator.
 
diff --git a/arch/cris/Kconfig.debug b/arch/cris/Kconfig.debug
index 0a1d62a23614..0b9a630dc812 100644
--- a/arch/cris/Kconfig.debug
+++ b/arch/cris/Kconfig.debug
@@ -32,4 +32,10 @@ config DEBUG_NMI_OOPS
 	  If the system locks up without any debug information you can say Y
 	  here to make it possible to dump an OOPS with an external NMI.
 
+config NO_SEGFAULT_TERMINATION
+	bool "Keep segfaulting processes"
+	help
+	  Place segfaulting user mode processes on a wait queue instead of
+	  delivering a terminating SIGSEGV to allow debugging with gdb.
+
 endmenu
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 58f5864a6680..0d7221779923 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -383,7 +383,7 @@ config ETRAX_RS485
 	depends on ETRAX_SERIAL
 	help
 	  Enables support for RS-485 serial communication.  For a primer on
-	  RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
+	  RS-485, see <http://en.wikipedia.org/wiki/Rs485>
 
 config ETRAX_RS485_ON_PA
 	bool "RS-485 mode on PA"
diff --git a/arch/cris/arch-v10/drivers/ds1302.c b/arch/cris/arch-v10/drivers/ds1302.c
index 884275629ef7..3d655dcc65da 100644
--- a/arch/cris/arch-v10/drivers/ds1302.c
+++ b/arch/cris/arch-v10/drivers/ds1302.c
@@ -19,7 +19,7 @@
 #include <linux/module.h>
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/bcd.h>
 #include <linux/capability.h>
 
@@ -34,6 +34,7 @@
 
 #define RTC_MAJOR_NR 121 /* local major, change later */
 
+static DEFINE_MUTEX(ds1302_mutex);
 static const char ds1302_name[] = "ds1302";
 
 /* The DS1302 might be connected to different bits on different products. 
@@ -357,9 +358,9 @@ static long rtc_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned lon
 {
 	int ret;
 
-	lock_kernel();
+	mutex_lock(&ds1302_mutex);
 	ret = rtc_ioctl(file, cmd, arg);
-	unlock_kernel();
+	mutex_unlock(&ds1302_mutex);
 
 	return ret;
 }
@@ -387,6 +388,7 @@ print_rtc_status(void)
 static const struct file_operations rtc_fops = {
 	.owner		= THIS_MODULE,
 	.unlocked_ioctl = rtc_unlocked_ioctl,
+	.llseek		= noop_llseek,
 }; 
 
 /* Probe for the chip by writing something to its RAM and try reading it back. */
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
index c3405507a3d1..5047a33043bd 100644
--- a/arch/cris/arch-v10/drivers/eeprom.c
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -28,7 +28,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/smp_lock.h>
 #include <linux/wait.h>
 #include <asm/uaccess.h>
 #include "i2c.h"
@@ -376,7 +375,6 @@ int __init eeprom_init(void)
 /* Opens the device. */
 static int eeprom_open(struct inode * inode, struct file * file)
 {
-  cycle_kernel_lock();
   if(iminor(inode) != EEPROM_MINOR_NR)
      return -ENXIO;
   if(imajor(inode) != EEPROM_MAJOR_NR)
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
index 4b0f65fac8e8..a276f0811731 100644
--- a/arch/cris/arch-v10/drivers/gpio.c
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -16,7 +16,6 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/poll.h>
 #include <linux/init.h>
@@ -46,8 +45,7 @@ static char gpio_name[] = "etrax gpio";
 static wait_queue_head_t *gpio_wq;
 #endif
 
-static int gpio_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg);
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 static ssize_t gpio_write(struct file *file, const char __user *buf,
 	size_t count, loff_t *off);
 static int gpio_open(struct inode *inode, struct file *filp);
@@ -324,7 +322,6 @@ gpio_open(struct inode *inode, struct file *filp)
 	if (!priv)
 		return -ENOMEM;
 
-	lock_kernel();
 	priv->minor = p;
 
 	/* initialize the io/alarm struct */
@@ -359,7 +356,6 @@ gpio_open(struct inode *inode, struct file *filp)
 	alarmlist = priv;
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
-	unlock_kernel();
 	return 0;
 }
 
@@ -504,9 +500,7 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
 static int
 gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
 
-static int
-gpio_ioctl(struct inode *inode, struct file *file,
-	   unsigned int cmd, unsigned long arg)
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
 	unsigned long val;
@@ -516,54 +510,65 @@ gpio_ioctl(struct inode *inode, struct file *file,
 	if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
 		return -EINVAL;
 
-	spin_lock_irqsave(&gpio_lock, flags);
-
 	switch (_IOC_NR(cmd)) {
 	case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
 		// read the port
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (USE_PORTS(priv)) {
 			ret =  *priv->port;
 		} else if (priv->minor == GPIO_MINOR_G) {
 			ret =  (*R_PORT_G_DATA) & 0x7FFFFFFF;
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+
 		break;
 	case IO_SETBITS:
 		// set changeable bits with a 1 in arg
+		spin_lock_irqsave(&gpio_lock, flags);
+
 		if (USE_PORTS(priv)) {
-			*priv->port = *priv->shadow |= 
+			*priv->port = *priv->shadow |=
 			  ((unsigned char)arg & priv->changeable_bits);
 		} else if (priv->minor == GPIO_MINOR_G) {
 			*R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits);
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+
 		break;
 	case IO_CLRBITS:
 		// clear changeable bits with a 1 in arg
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (USE_PORTS(priv)) {
-			*priv->port = *priv->shadow &= 
+			*priv->port = *priv->shadow &=
 			 ~((unsigned char)arg & priv->changeable_bits);
 		} else if (priv->minor == GPIO_MINOR_G) {
 			*R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits);
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_HIGHALARM:
 		// set alarm when bits with 1 in arg go high
+		spin_lock_irqsave(&gpio_lock, flags);
 		priv->highalarm |= arg;
 		gpio_some_alarms = 1;
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_LOWALARM:
 		// set alarm when bits with 1 in arg go low
+		spin_lock_irqsave(&gpio_lock, flags);
 		priv->lowalarm |= arg;
 		gpio_some_alarms = 1;
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_CLRALARM:
-		// clear alarm for bits with 1 in arg
+		/* clear alarm for bits with 1 in arg */
+		spin_lock_irqsave(&gpio_lock, flags);
 		priv->highalarm &= ~arg;
 		priv->lowalarm  &= ~arg;
 		{
 			/* Must update gpio_some_alarms */
 			struct gpio_private *p = alarmlist;
 			int some_alarms;
-			spin_lock_irq(&gpio_lock);
 			p = alarmlist;
 			some_alarms = 0;
 			while (p) {
@@ -574,11 +579,12 @@ gpio_ioctl(struct inode *inode, struct file *file,
 				p = p->next;
 			}
 			gpio_some_alarms = some_alarms;
-			spin_unlock_irq(&gpio_lock);
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
 		/* Read direction 0=input 1=output */
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (USE_PORTS(priv)) {
 			ret = *priv->dir_shadow;
 		} else if (priv->minor == GPIO_MINOR_G) {
@@ -587,30 +593,40 @@ gpio_ioctl(struct inode *inode, struct file *file,
 			 */
 			ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
-		/* Set direction 0=unchanged 1=input, 
-		 * return mask with 1=input 
+		/* Set direction 0=unchanged 1=input,
+		 * return mask with 1=input
 		 */
+		spin_lock_irqsave(&gpio_lock, flags);
 		ret = setget_input(priv, arg) & 0x7FFFFFFF;
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
-		/* Set direction 0=unchanged 1=output, 
-		 * return mask with 1=output 
+		/* Set direction 0=unchanged 1=output,
+		 * return mask with 1=output
 		 */
+		spin_lock_irqsave(&gpio_lock, flags);
 		ret =  setget_output(priv, arg) & 0x7FFFFFFF;
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_SHUTDOWN:
+		spin_lock_irqsave(&gpio_lock, flags);
 		SOFT_SHUTDOWN();
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_GET_PWR_BT:
+		spin_lock_irqsave(&gpio_lock, flags);
 #if defined (CONFIG_ETRAX_SOFT_SHUTDOWN)
 		ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
 #else
 		ret = 0;
 #endif
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_CFG_WRITE_MODE:
+		spin_lock_irqsave(&gpio_lock, flags);
 		priv->clk_mask = arg & 0xFF;
 		priv->data_mask = (arg >> 8) & 0xFF;
 		priv->write_msb = (arg >> 16) & 0x01;
@@ -626,28 +642,33 @@ gpio_ioctl(struct inode *inode, struct file *file,
 			priv->data_mask = 0;
 			ret = -EPERM;
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
-	case IO_READ_INBITS: 
+	case IO_READ_INBITS:
 		/* *arg is result of reading the input pins */
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (USE_PORTS(priv)) {
 			val = *priv->port;
 		} else if (priv->minor == GPIO_MINOR_G) {
 			val = *R_PORT_G_DATA;
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
 			ret = -EFAULT;
 		break;
 	case IO_READ_OUTBITS:
 		 /* *arg is result of reading the output shadow */
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (USE_PORTS(priv)) {
 			val = *priv->shadow;
 		} else if (priv->minor == GPIO_MINOR_G) {
 			val = port_g_data_shadow;
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
 			ret = -EFAULT;
 		break;
-	case IO_SETGET_INPUT: 
+	case IO_SETGET_INPUT:
 		/* bits set in *arg is set to input,
 		 * *arg updated with current input pins.
 		 */
@@ -656,7 +677,9 @@ gpio_ioctl(struct inode *inode, struct file *file,
 			ret = -EFAULT;
 			break;
 		}
+		spin_lock_irqsave(&gpio_lock, flags);
 		val = setget_input(priv, val);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
 			ret = -EFAULT;
 		break;
@@ -668,18 +691,21 @@ gpio_ioctl(struct inode *inode, struct file *file,
 			ret = -EFAULT;
 			break;
 		}
+		spin_lock_irqsave(&gpio_lock, flags);
 		val = setget_output(priv, val);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
 			ret = -EFAULT;
 		break;
 	default:
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (priv->minor == GPIO_MINOR_LEDS)
 			ret = gpio_leds_ioctl(cmd, arg);
 		else
 			ret = -EINVAL;
+		spin_unlock_irqrestore(&gpio_lock, flags);
 	} /* switch */
 
-	spin_unlock_irqrestore(&gpio_lock, flags);
 	return ret;
 }
 
@@ -713,12 +739,13 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
 }
 
 static const struct file_operations gpio_fops = {
-	.owner       = THIS_MODULE,
-	.poll        = gpio_poll,
-	.ioctl       = gpio_ioctl,
-	.write       = gpio_write,
-	.open        = gpio_open,
-	.release     = gpio_release,
+	.owner          = THIS_MODULE,
+	.poll           = gpio_poll,
+	.unlocked_ioctl = gpio_ioctl,
+	.write          = gpio_write,
+	.open           = gpio_open,
+	.release        = gpio_release,
+	.llseek		= noop_llseek,
 };
 
 static void ioif_watcher(const unsigned int gpio_in_available,
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
index a8737a8eb229..c413539d4205 100644
--- a/arch/cris/arch-v10/drivers/i2c.c
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -14,7 +14,6 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
@@ -60,8 +59,8 @@ static const char i2c_name[] = "i2c";
 
 #define SDABIT CONFIG_ETRAX_I2C_DATA_PORT
 #define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT
-#define i2c_enable() 
-#define i2c_disable() 
+#define i2c_enable()
+#define i2c_disable()
 
 /* enable or disable output-enable, to select output or input on the i2c bus */
 
@@ -91,7 +90,7 @@ static const char i2c_name[] = "i2c";
 
 #define i2c_dir_out() \
 	*R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
-	REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1); 
+	REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1);
 #define i2c_dir_in() \
 	*R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
 	REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0);
@@ -189,7 +188,7 @@ i2c_outbyte(unsigned char x)
 		} else {
 			i2c_data(I2C_DATA_LOW);
 		}
-		
+
 		i2c_delay(CLOCK_LOW_TIME/2);
 		i2c_clk(I2C_CLOCK_HIGH);
 		i2c_delay(CLOCK_HIGH_TIME);
@@ -416,7 +415,7 @@ i2c_sendnack(void)
 *#
 *#--------------------------------------------------------------------------*/
 int
-i2c_writereg(unsigned char theSlave, unsigned char theReg, 
+i2c_writereg(unsigned char theSlave, unsigned char theReg,
 	     unsigned char theValue)
 {
 	int error, cntr = 3;
@@ -468,7 +467,7 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
 		 * enable interrupt again
 		 */
 		local_irq_restore(flags);
-		
+
 	} while(error && cntr--);
 
 	i2c_delay(CLOCK_LOW_TIME);
@@ -504,7 +503,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 		 * generate start condition
 		 */
 		i2c_start();
-    
+
 		/*
 		 * send slave address
 		 */
@@ -555,7 +554,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 		 * enable interrupt again
 		 */
 		local_irq_restore(flags);
-		
+
 	} while(error && cntr--);
 
 	spin_unlock(&i2c_lock);
@@ -566,7 +565,6 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 static int
 i2c_open(struct inode *inode, struct file *filp)
 {
-	cycle_kernel_lock();
 	return 0;
 }
 
@@ -579,9 +577,7 @@ i2c_release(struct inode *inode, struct file *filp)
 /* Main device API. ioctl's to write or read to/from i2c registers.
  */
 
-static int
-i2c_ioctl(struct inode *inode, struct file *file,
-	  unsigned int cmd, unsigned long arg)
+static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
 		return -EINVAL;
@@ -590,7 +586,7 @@ i2c_ioctl(struct inode *inode, struct file *file,
 	switch (_IOC_NR(cmd)) {
 		case I2C_WRITEREG:
 			/* write to an i2c slave */
-			D(printk("i2cw %d %d %d\n", 
+			D(printk(KERN_DEBUG "i2cw %d %d %d\n",
 				 I2C_ARGSLAVE(arg),
 				 I2C_ARGREG(arg),
 				 I2C_ARGVALUE(arg)));
@@ -602,26 +598,26 @@ i2c_ioctl(struct inode *inode, struct file *file,
 		{
 			unsigned char val;
 			/* read from an i2c slave */
-			D(printk("i2cr %d %d ", 
+			D(printk(KERN_DEBUG "i2cr %d %d ",
 				I2C_ARGSLAVE(arg),
 				I2C_ARGREG(arg)));
 			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
-			D(printk("= %d\n", val));
+			D(printk(KERN_DEBUG "= %d\n", val));
 			return val;
-		}					    
+		}
 		default:
 			return -EINVAL;
 
 	}
-	
 	return 0;
 }
 
 static const struct file_operations i2c_fops = {
-	.owner    = THIS_MODULE,
-	.ioctl    = i2c_ioctl,
-	.open     = i2c_open,
-	.release  = i2c_release,
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= i2c_ioctl,
+	.open		= i2c_open,
+	.release	= i2c_release,
+	.llseek		= noop_llseek,
 };
 
 int __init
diff --git a/arch/cris/arch-v10/drivers/i2c.h b/arch/cris/arch-v10/drivers/i2c.h
index 4ee91426bd40..e36c96276478 100644
--- a/arch/cris/arch-v10/drivers/i2c.h
+++ b/arch/cris/arch-v10/drivers/i2c.h
@@ -1,5 +1,4 @@
-/* $Id: i2c.h,v 1.3 2004/05/28 09:26:59 starvik Exp $ */
-
+/* i2c.h */
 int i2c_init(void);
 
 /* High level I2C actions */
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 7dcb1f85f42b..ea69faba9b62 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -27,7 +27,6 @@
 #include <linux/delay.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
-#include <linux/smp_lock.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -49,6 +48,7 @@
 #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
 #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
 
+static DEFINE_MUTEX(pcf8563_mutex);
 static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
 
 static const unsigned char days_in_month[] =
@@ -64,6 +64,7 @@ static int voltage_low;
 static const struct file_operations pcf8563_fops = {
 	.owner = THIS_MODULE,
 	.unlocked_ioctl = pcf8563_unlocked_ioctl,
+	.llseek		= noop_llseek,
 };
 
 unsigned char
@@ -343,9 +344,9 @@ static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned
 {
 	int ret;
 
-	lock_kernel();
+	mutex_lock(&pcf8563_mutex);
 	return pcf8563_ioctl(filp, cmd, arg);
-	unlock_kernel();
+	mutex_unlock(&pcf8563_mutex);
 
 	return ret;
 }
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
index 109dcd826d17..399dc1ec8e6f 100644
--- a/arch/cris/arch-v10/drivers/sync_serial.c
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -20,7 +20,7 @@
 #include <linux/interrupt.h>
 #include <linux/poll.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/timer.h>
 #include <asm/irq.h>
 #include <asm/dma.h>
@@ -149,6 +149,7 @@ struct sync_port {
 };
 
 
+static DEFINE_MUTEX(sync_serial_mutex);
 static int etrax_sync_serial_init(void);
 static void initialize_port(int portnbr);
 static inline int sync_data_avail(struct sync_port *port);
@@ -157,7 +158,7 @@ static int sync_serial_open(struct inode *inode, struct file *file);
 static int sync_serial_release(struct inode *inode, struct file *file);
 static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
 
-static int sync_serial_ioctl(struct inode *inode, struct file *file,
+static int sync_serial_ioctl(struct file *file,
 	unsigned int cmd, unsigned long arg);
 static ssize_t sync_serial_write(struct file *file, const char *buf,
 	size_t count, loff_t *ppos);
@@ -244,13 +245,14 @@ static unsigned sync_serial_prescale_shadow;
 #define NUMBER_OF_PORTS 2
 
 static const struct file_operations sync_serial_fops = {
-	.owner   = THIS_MODULE,
-	.write   = sync_serial_write,
-	.read    = sync_serial_read,
-	.poll    = sync_serial_poll,
-	.ioctl   = sync_serial_ioctl,
-	.open    = sync_serial_open,
-	.release = sync_serial_release
+	.owner		= THIS_MODULE,
+	.write		= sync_serial_write,
+	.read		= sync_serial_read,
+	.poll		= sync_serial_poll,
+	.unlocked_ioctl	= sync_serial_ioctl,
+	.open		= sync_serial_open,
+	.release	= sync_serial_release,
+	.llseek		= noop_llseek,
 };
 
 static int __init etrax_sync_serial_init(void)
@@ -445,7 +447,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 	int mode;
 	int err = -EBUSY;
 
-	lock_kernel();
+	mutex_lock(&sync_serial_mutex);
 	DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev));
 
 	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) {
@@ -626,7 +628,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 	ret = 0;
 	
 out:
-	unlock_kernel();
+	mutex_unlock(&sync_serial_mutex);
 	return ret;
 }
 
@@ -678,7 +680,7 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
 	return mask;
 }
 
-static int sync_serial_ioctl(struct inode *inode, struct file *file,
+static int sync_serial_ioctl_unlocked(struct file *file,
 		  unsigned int cmd, unsigned long arg)
 {
 	int return_val = 0;
@@ -956,6 +958,18 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file,
 	return return_val;
 }
 
+static long sync_serial_ioctl(struct file *file,
+			      unsigned int cmd, unsigned long arg)
+{
+	long ret;
+
+	mutex_lock(&sync_serial_mutex);
+	ret = sync_serial_ioctl_unlocked(file, cmd, arg);
+	mutex_unlock(&sync_serial_mutex);
+
+	return ret;
+}
+
 
 static ssize_t sync_serial_write(struct file *file, const char *buf,
 	size_t count, loff_t *ppos)
diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c
index 5ff08a8695e9..8a8196ee8ce8 100644
--- a/arch/cris/arch-v10/kernel/fasttimer.c
+++ b/arch/cris/arch-v10/kernel/fasttimer.c
@@ -467,11 +467,7 @@ timer1_handler(int irq, void *dev_id)
 
 static void wake_up_func(unsigned long data)
 {
-#ifdef DECLARE_WAITQUEUE
-  wait_queue_head_t  *sleep_wait_p = (wait_queue_head_t*)data;
-#else
-  struct wait_queue **sleep_wait_p = (struct wait_queue **)data;
-#endif
+  wait_queue_head_t *sleep_wait_p = (wait_queue_head_t *)data;
   wake_up(sleep_wait_p);
 }
 
diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S
index fc4577102933..a1f2014b4e3b 100644
--- a/arch/cris/arch-v10/kernel/head.S
+++ b/arch/cris/arch-v10/kernel/head.S
@@ -280,7 +280,7 @@ _no_romfs_in_flash:
 	;; the "rom fs" we'll possibly use in 2.4 if not JFFS (which does
 	;; not need this mechanism anyway)
 
-	move.d	__vmlinux_end, $r0; the image will be after the vmlinux end address
+	move.d	__init_end, $r0; the image will be after the end of init
 	move.d	[$r0], $r1	; cramfs assumes same endian on host/target
 	cmp.d	CRAMFS_MAGIC, $r1; magic value in cramfs superblock
 	bne	2f
diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c
index 93f0f64b1326..9a57db6907f5 100644
--- a/arch/cris/arch-v10/kernel/process.c
+++ b/arch/cris/arch-v10/kernel/process.c
@@ -204,7 +204,9 @@ asmlinkage int sys_vfork(long r10, long r11, long r12, long r13, long mof, long
 /*
  * sys_execve() executes a new program.
  */
-asmlinkage int sys_execve(const char *fname, char **argv, char **envp,
+asmlinkage int sys_execve(const char *fname,
+			  const char *const *argv,
+			  const char *const *envp,
 			  long r13, long mof, long srp, 
 			  struct pt_regs *regs)
 {
diff --git a/arch/cris/arch-v10/kernel/ptrace.c b/arch/cris/arch-v10/kernel/ptrace.c
index e70c804e9377..320065f3cbe5 100644
--- a/arch/cris/arch-v10/kernel/ptrace.c
+++ b/arch/cris/arch-v10/kernel/ptrace.c
@@ -76,9 +76,11 @@ ptrace_disable(struct task_struct *child)
  * (in user space) where the result of the ptrace call is written (instead of
  * being returned).
  */
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
 {
 	int ret;
+	unsigned int regno = addr >> 2;
 	unsigned long __user *datap = (unsigned long __user *)data;
 
 	switch (request) {
@@ -93,10 +95,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			unsigned long tmp;
 
 			ret = -EIO;
-			if ((addr & 3) || addr < 0 || addr > PT_MAX << 2)
+			if ((addr & 3) || regno > PT_MAX)
 				break;
 
-			tmp = get_reg(child, addr >> 2);
+			tmp = get_reg(child, regno);
 			ret = put_user(tmp, datap);
 			break;
 		}
@@ -110,19 +112,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
  		/* Write the word at location address in the USER area. */
 		case PTRACE_POKEUSR:
 			ret = -EIO;
-			if ((addr & 3) || addr < 0 || addr > PT_MAX << 2)
+			if ((addr & 3) || regno > PT_MAX)
 				break;
 
-			addr >>= 2;
-
-			if (addr == PT_DCCR) {
+			if (regno == PT_DCCR) {
 				/* don't allow the tracing process to change stuff like
 				 * interrupt enable, kernel/user bit, dma enables etc.
 				 */
 				data &= DCCR_MASK;
 				data |= get_reg(child, PT_DCCR) & ~DCCR_MASK;
 			}
-			if (put_reg(child, addr, data))
+			if (put_reg(child, regno, data))
 				break;
 			ret = 0;
 			break;
@@ -141,7 +141,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 					break;
 				}
 				
-				data += sizeof(long);
+				datap++;
 			}
 
 			break;
@@ -165,7 +165,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				}
 				
 				put_reg(child, i, tmp);
-				data += sizeof(long);
+				datap++;
 			}
 			
 			break;
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 30adae594aef..00eb36f8debf 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -61,66 +61,16 @@ unsigned long get_ns_in_jiffie(void)
 
 unsigned long do_slow_gettimeoffset(void)
 {
-	unsigned long count, t1;
-	unsigned long usec_count = 0;
-	unsigned short presc_count;
-
-	static unsigned long count_p = TIMER0_DIV;/* for the first call after boot */
-	static unsigned long jiffies_p = 0;
-
-	/*
-	 * cache volatile jiffies temporarily; we have IRQs turned off. 
-	 */
-	unsigned long jiffies_t;
+	unsigned long count;
 
 	/* The timer interrupt comes from Etrax timer 0. In order to get
 	 * better precision, we check the current value. It might have
 	 * underflowed already though.
 	 */
-
-#ifndef CONFIG_SVINTO_SIM
-	/* Not available in the xsim simulator. */
 	count = *R_TIMER0_DATA;
-	presc_count = *R_TIM_PRESC_STATUS;  
-	/* presc_count might be wrapped */
-	t1 = *R_TIMER0_DATA;
-	if (count != t1){
-		/* it wrapped, read prescaler again...  */
-		presc_count = *R_TIM_PRESC_STATUS;
-		count = t1;
-	}
-#else
-	count = 0;
-	presc_count = 0;
-#endif
-
- 	jiffies_t = jiffies;
 
-	/*
-	 * avoiding timer inconsistencies (they are rare, but they happen)...
-	 * there are one problem that must be avoided here:
-	 *  1. the timer counter underflows
-	 */
-	if( jiffies_t == jiffies_p ) {
-		if( count > count_p ) {
-			/* Timer wrapped, use new count and prescale 
-			 * increase the time corresponding to one jiffie
-			 */
-			usec_count = 1000000/HZ;
-		}
-	} else
-		jiffies_p = jiffies_t;
-        count_p = count;
-	if (presc_count >= PRESCALE_VALUE/2 ){
-		presc_count =  PRESCALE_VALUE - presc_count + PRESCALE_VALUE/2;
-	} else {
-		presc_count =  PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2;
-	}
 	/* Convert timer value to usec */
-	usec_count += ( (TIMER0_DIV - count) * (1000000/HZ)/TIMER0_DIV ) +
-	              (( (presc_count) * (1000000000/PRESCALE_FREQ))/1000);
-
-	return usec_count;
+	return (TIMER0_DIV - count) * ((NSEC_PER_SEC/1000)/HZ)/TIMER0_DIV;
 }
 
 /* Excerpt from the Etrax100 HSDD about the built-in watchdog:
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index b70fb34939d9..c03bc3bc30c2 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -11,7 +11,6 @@
 #include <linux/string.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/stddef.h>
 
@@ -217,7 +216,7 @@ static int cryptocop_open(struct inode *, struct file *);
 
 static int cryptocop_release(struct inode *, struct file *);
 
-static int cryptocop_ioctl(struct inode *inode, struct file *file,
+static long cryptocop_ioctl(struct file *file,
 			   unsigned int cmd, unsigned long arg);
 
 static void cryptocop_start_job(void);
@@ -279,10 +278,11 @@ static void print_user_dma_lists(struct cryptocop_dma_list_operation *dma_op);
 
 
 const struct file_operations cryptocop_fops = {
-	.owner =	THIS_MODULE,
-	.open =		cryptocop_open,
-	.release =	cryptocop_release,
-	.ioctl =	cryptocop_ioctl
+	.owner		= THIS_MODULE,
+	.open		= cryptocop_open,
+	.release	= cryptocop_release,
+	.unlocked_ioctl = cryptocop_ioctl,
+	.llseek		= noop_llseek,
 };
 
 
@@ -2307,7 +2307,6 @@ static int cryptocop_open(struct inode *inode, struct file *filp)
 {
 	int p = iminor(inode);
 
-	cycle_kernel_lock();
 	if (p != CRYPTOCOP_MINOR) return -EINVAL;
 
 	filp->private_data = NULL;
@@ -3102,7 +3101,8 @@ static int cryptocop_ioctl_create_session(struct inode *inode, struct file *filp
 	return 0;
 }
 
-static int cryptocop_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+static long cryptocop_ioctl_unlocked(struct inode *inode,
+	struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	int err = 0;
 	if (_IOC_TYPE(cmd) != ETRAXCRYPTOCOP_IOCTYPE) {
@@ -3134,6 +3134,19 @@ static int cryptocop_ioctl(struct inode *inode, struct file *filp, unsigned int
 	return 0;
 }
 
+static long
+cryptocop_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+       struct inode *inode = file->f_path.dentry->d_inode;
+       long ret;
+
+       mutex_lock(&cryptocop_mutex);
+       ret = cryptocop_ioctl_unlocked(inode, filp, cmd, arg);
+       mutex_unlock(&cryptocop_mutex);
+
+       return ret;
+}
+
 
 #ifdef LDEBUG
 static void print_dma_descriptors(struct cryptocop_int_operation *iop)
diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c
index 2fd6a740d895..ddb23996f11a 100644
--- a/arch/cris/arch-v32/drivers/i2c.c
+++ b/arch/cris/arch-v32/drivers/i2c.c
@@ -32,7 +32,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 
 #include <asm/etraxi2c.h>
 
@@ -47,6 +47,7 @@
 #define D(x)
 
 #define I2C_MAJOR 123  /* LOCAL/EXPERIMENTAL */
+static DEFINE_MUTEX(i2c_mutex);
 static const char i2c_name[] = "i2c";
 
 #define CLOCK_LOW_TIME            8
@@ -636,7 +637,6 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 static int
 i2c_open(struct inode *inode, struct file *filp)
 {
-	cycle_kernel_lock();
 	return 0;
 }
 
@@ -665,11 +665,11 @@ i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 				 I2C_ARGREG(arg),
 				 I2C_ARGVALUE(arg)));
 
-			lock_kernel();
+			mutex_lock(&i2c_mutex);
 			ret = i2c_writereg(I2C_ARGSLAVE(arg),
 					    I2C_ARGREG(arg),
 					    I2C_ARGVALUE(arg));
-			unlock_kernel();
+			mutex_unlock(&i2c_mutex);
 			return ret;
 
 		case I2C_READREG:
@@ -679,9 +679,9 @@ i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			D(printk("i2cr %d %d ",
 				I2C_ARGSLAVE(arg),
 				I2C_ARGREG(arg)));
-			lock_kernel();
+			mutex_lock(&i2c_mutex);
 			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
-			unlock_kernel();
+			mutex_unlock(&i2c_mutex);
 			D(printk("= %d\n", val));
 			return val;
 		}
@@ -698,6 +698,7 @@ static const struct file_operations i2c_fops = {
 	.unlocked_ioctl = i2c_ioctl,
 	.open		= i2c_open,
 	.release	= i2c_release,
+	.llseek		= noop_llseek,
 };
 
 static int __init i2c_init(void)
diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
index 97357cfd17bb..c845831e2225 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 
 #include <asm/etraxgpio.h>
 #include <hwregs/reg_map.h>
@@ -66,14 +66,14 @@ static int dp_cnt;
 #define DP(x)
 #endif
 
+static DEFINE_MUTEX(gpio_mutex);
 static char gpio_name[] = "etrax gpio";
 
 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
 static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 			      unsigned long arg);
 #endif
-static int gpio_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg);
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 static ssize_t gpio_write(struct file *file, const char __user *buf,
 	size_t count, loff_t *off);
 static int gpio_open(struct inode *inode, struct file *filp);
@@ -392,7 +392,7 @@ static int gpio_open(struct inode *inode, struct file *filp)
 	if (!priv)
 		return -ENOMEM;
 
-	lock_kernel();
+	mutex_lock(&gpio_mutex);
 	memset(priv, 0, sizeof(*priv));
 
 	priv->minor = p;
@@ -415,7 +415,7 @@ static int gpio_open(struct inode *inode, struct file *filp)
 		spin_unlock_irq(&gpio_lock);
 	}
 
-	unlock_kernel();
+	mutex_unlock(&gpio_mutex);
 	return 0;
 }
 
@@ -521,7 +521,7 @@ static inline unsigned long setget_output(struct gpio_private *priv,
 	return dir_shadow;
 } /* setget_output */
 
-static int gpio_ioctl(struct inode *inode, struct file *file,
+static long gpio_ioctl_unlocked(struct file *file,
 	unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
@@ -664,6 +664,17 @@ static int gpio_ioctl(struct inode *inode, struct file *file,
 	return 0;
 }
 
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+       long ret;
+
+       mutex_lock(&gpio_mutex);
+       ret = gpio_ioctl_unlocked(file, cmd, arg);
+       mutex_unlock(&gpio_mutex);
+
+       return ret;
+}
+
 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
 static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 	unsigned long arg)
@@ -877,12 +888,13 @@ static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
 }
 
 static const struct file_operations gpio_fops = {
-	.owner       = THIS_MODULE,
-	.poll        = gpio_poll,
-	.ioctl       = gpio_ioctl,
-	.write       = gpio_write,
-	.open        = gpio_open,
-	.release     = gpio_release,
+	.owner		= THIS_MODULE,
+	.poll		= gpio_poll,
+	.unlocked_ioctl	= gpio_ioctl,
+	.write		= gpio_write,
+	.open		= gpio_open,
+	.release	= gpio_release,
+	.llseek		= noop_llseek,
 };
 
 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
index d89ab80498ed..ee90d2659be7 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
@@ -22,7 +22,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 
 #include <asm/etraxgpio.h>
 #include <hwregs/reg_map.h>
@@ -64,6 +64,7 @@ static int dp_cnt;
 #define DP(x)
 #endif
 
+static DEFINE_MUTEX(gpio_mutex);
 static char gpio_name[] = "etrax gpio";
 
 #if 0
@@ -74,8 +75,7 @@ static wait_queue_head_t *gpio_wq;
 static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 	unsigned long arg);
 #endif
-static int gpio_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg);
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
 	loff_t *off);
 static int gpio_open(struct inode *inode, struct file *filp);
@@ -185,7 +185,7 @@ static volatile unsigned long *dir_oe[NUM_PORTS] = {
 static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
 {
 	unsigned int mask = 0;
-	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	struct gpio_private *priv = file->private_data;
 	unsigned long data;
 	poll_wait(file, &priv->alarm_wq, wait);
 	if (priv->minor == GPIO_MINOR_A) {
@@ -353,7 +353,7 @@ gpio_pa_interrupt(int irq, void *dev_id)
 static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
 	loff_t *off)
 {
-	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	struct gpio_private *priv = file->private_data;
 	unsigned char data, clk_mask, data_mask, write_msb;
 	unsigned long flags;
 	unsigned long shadow;
@@ -430,7 +430,7 @@ gpio_open(struct inode *inode, struct file *filp)
 	if (!priv)
 		return -ENOMEM;
 
-	lock_kernel();
+	mutex_lock(&gpio_mutex);
 	memset(priv, 0, sizeof(*priv));
 
 	priv->minor = p;
@@ -451,7 +451,7 @@ gpio_open(struct inode *inode, struct file *filp)
 	alarmlist = priv;
 	spin_unlock_irq(&alarm_lock);
 
-	unlock_kernel();
+	mutex_unlock(&gpio_mutex);
 	return 0;
 }
 
@@ -468,7 +468,7 @@ gpio_release(struct inode *inode, struct file *filp)
 
 	spin_lock_irq(&alarm_lock);
 	p = alarmlist;
-	todel = (struct gpio_private *)filp->private_data;
+	todel = filp->private_data;
 
 	if (p == todel) {
 		alarmlist = todel->next;
@@ -557,17 +557,15 @@ inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
 	return dir_shadow;
 } /* setget_output */
 
-static int
-gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
 
 static int
-gpio_ioctl(struct inode *inode, struct file *file,
-	   unsigned int cmd, unsigned long arg)
+gpio_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
 	unsigned long val;
 	unsigned long shadow;
-	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	struct gpio_private *priv = file->private_data;
 	if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
 		return -EINVAL;
 
@@ -707,6 +705,17 @@ gpio_ioctl(struct inode *inode, struct file *file,
 	return 0;
 }
 
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+       long ret;
+
+       mutex_lock(&gpio_mutex);
+       ret = gpio_ioctl_unlocked(file, cmd, arg);
+       mutex_unlock(&gpio_mutex);
+
+       return ret;
+}
+
 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
 static int
 virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -714,7 +723,7 @@ virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	unsigned long flags;
 	unsigned short val;
 	unsigned short shadow;
-	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	struct gpio_private *priv = file->private_data;
 
 	switch (_IOC_NR(cmd)) {
 	case IO_SETBITS:
@@ -856,12 +865,13 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
 }
 
 static const struct file_operations gpio_fops = {
-	.owner       = THIS_MODULE,
-	.poll        = gpio_poll,
-	.ioctl       = gpio_ioctl,
-	.write       = gpio_write,
-	.open        = gpio_open,
-	.release     = gpio_release,
+	.owner		= THIS_MODULE,
+	.poll		= gpio_poll,
+	.unlocked_ioctl	= gpio_ioctl,
+	.write		= gpio_write,
+	.open		= gpio_open,
+	.release	= gpio_release,
+	.llseek		= noop_llseek,
 };
 
 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index bef6eb53b153..b6e4fc0aad42 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/ioctl.h>
-#include <linux/smp_lock.h>
 #include <linux/delay.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
@@ -45,6 +44,7 @@
 #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
 #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
 
+static DEFINE_MUTEX(pcf8563_mutex);
 static DEFINE_MUTEX(rtc_lock); /* Protect state etc */
 
 static const unsigned char days_in_month[] =
@@ -60,6 +60,7 @@ static int voltage_low;
 static const struct file_operations pcf8563_fops = {
 	.owner		= THIS_MODULE,
 	.unlocked_ioctl = pcf8563_unlocked_ioctl,
+	.llseek		= noop_llseek,
 };
 
 unsigned char
@@ -339,9 +340,9 @@ static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned
 {
 	int ret;
 
-	lock_kernel();
+	mutex_lock(&pcf8563_mutex);
 	return pcf8563_ioctl(filp, cmd, arg);
-	unlock_kernel();
+	mutex_unlock(&pcf8563_mutex);
 
 	return ret;
 }
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
index 4889f196ecd6..c8637a9195ea 100644
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -13,7 +13,7 @@
 #include <linux/errno.h>
 #include <linux/major.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/poll.h>
 #include <linux/init.h>
@@ -145,6 +145,7 @@ typedef struct sync_port
 	spinlock_t lock;
 } sync_port;
 
+static DEFINE_MUTEX(sync_serial_mutex);
 static int etrax_sync_serial_init(void);
 static void initialize_port(int portnbr);
 static inline int sync_data_avail(struct sync_port *port);
@@ -153,7 +154,7 @@ static int sync_serial_open(struct inode *, struct file*);
 static int sync_serial_release(struct inode*, struct file*);
 static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
 
-static int sync_serial_ioctl(struct inode*, struct file*,
+static int sync_serial_ioctl(struct file *,
 			     unsigned int cmd, unsigned long arg);
 static ssize_t sync_serial_write(struct file * file, const char * buf,
 				 size_t count, loff_t *ppos);
@@ -241,13 +242,14 @@ static struct sync_port ports[]=
 #define NBR_PORTS ARRAY_SIZE(ports)
 
 static const struct file_operations sync_serial_fops = {
-	.owner   = THIS_MODULE,
-	.write   = sync_serial_write,
-	.read    = sync_serial_read,
-	.poll    = sync_serial_poll,
-	.ioctl   = sync_serial_ioctl,
-	.open    = sync_serial_open,
-	.release = sync_serial_release
+	.owner		= THIS_MODULE,
+	.write		= sync_serial_write,
+	.read		= sync_serial_read,
+	.poll		= sync_serial_poll,
+	.unlocked_ioctl	= sync_serial_ioctl,
+	.open		= sync_serial_open,
+	.release	= sync_serial_release,
+	.llseek		= noop_llseek,
 };
 
 static int __init etrax_sync_serial_init(void)
@@ -434,7 +436,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 	reg_dma_rw_cfg cfg = {.en = regk_dma_yes};
 	reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes};
 
-	lock_kernel();
+	mutex_lock(&sync_serial_mutex);
 	DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev));
 
 	if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled)
@@ -583,7 +585,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 	port->busy++;
 	ret = 0;
 out:
-	unlock_kernel();
+	mutex_unlock(&sync_serial_mutex);
 	return ret;
 }
 
@@ -650,7 +652,7 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
 	return mask;
 }
 
-static int sync_serial_ioctl(struct inode *inode, struct file *file,
+static int sync_serial_ioctl(struct file *file,
 		  unsigned int cmd, unsigned long arg)
 {
 	int return_val = 0;
@@ -961,6 +963,18 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file,
 	return return_val;
 }
 
+static long sync_serial_ioctl(struct file *file,
+                             unsigned int cmd, unsigned long arg)
+{
+       long ret;
+
+       mutex_lock(&sync_serial_mutex);
+       ret = sync_serial_ioctl_unlocked(file, cmd, arg);
+       mutex_unlock(&sync_serial_mutex);
+
+       return ret;
+}
+
 /* NOTE: sync_serial_write does not support concurrency */
 static ssize_t sync_serial_write(struct file *file, const char *buf,
 				 size_t count, loff_t *ppos)
diff --git a/arch/cris/arch-v32/kernel/cacheflush.S b/arch/cris/arch-v32/kernel/cacheflush.S
index 956e8fb82f01..6fc3d95d7029 100644
--- a/arch/cris/arch-v32/kernel/cacheflush.S
+++ b/arch/cris/arch-v32/kernel/cacheflush.S
@@ -1,4 +1,5 @@
 	.global cris_flush_cache_range
+	.type	cris_flush_cache_range, @function
 cris_flush_cache_range:
 	move.d 1024, $r12
 	cmp.d $r11, $r12
@@ -80,8 +81,10 @@ cris_flush_1KB:
 	addq 32, $r10
 	ba cris_flush_cache_range
 	sub.d $r12, $r11
+	.size	cris_flush_cache_range, . - cris_flush_cache_range
 
 	.global cris_flush_cache
+	.type	cris_flush_cache, @function
 cris_flush_cache:
 	moveq 0, $r10
 cris_flush_line:
@@ -92,3 +95,5 @@ cris_flush_line:
 	fidxd [$r10]
 	ret
 	nop
+	.size	cris_flush_cache, . - cris_flush_cache
+
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 1f39861eac8c..0ecb50b8f0d9 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -76,12 +76,15 @@ _need_resched:
 
 	; Called at exit from fork. schedule_tail must be called to drop
 	; spinlock if CONFIG_PREEMPT.
+	.type	ret_from_fork,@function
 ret_from_fork:
 	jsr schedule_tail
 	nop
 	ba  ret_from_sys_call
 	nop
+	.size	ret_from_fork, . - ret_from_fork
 
+	.type	ret_from_intr,@function
 ret_from_intr:
 	;; Check for resched if preemptive kernel, or if we're going back to
 	;; user-mode. This test matches the user_regs(regs) macro. Don't simply
@@ -91,9 +94,10 @@ ret_from_intr:
 	move.d	[$acr], $r0
 	btstq	16, $r0			; User-mode flag.
 	bpl	_resume_kernel
+	.size	ret_from_intr, . - ret_from_intr + 2	; +2 includes the dslot.
 
 	; Note that di below is in delay slot.
-
+	.type	_resume_userspace,@function
 _resume_userspace:
 	di			; So need_resched and sigpending don't change.
 
@@ -107,6 +111,7 @@ _resume_userspace:
 	nop
 	ba	_Rexit
 	nop
+	.size	_resume_userspace, . - _resume_userspace
 
 	;; The system_call is called by a BREAK instruction, which looks pretty
 	;; much like any other exception.
@@ -122,30 +127,28 @@ _resume_userspace:
 	;; non-used instructions. Only the non-common cases cause the outlined code
 	;; to run..
 
+	.type	system_call,@function
 system_call:
 	;; Stack-frame similar to the irq heads, which is reversed in
 	;; ret_from_sys_call.
-	subq	12, $sp		; Skip EXS, EDA.
-	move	$erp, [$sp]
-	subq	4, $sp
-	move	$srp, [$sp]
-	subq	4, $sp
-	move	$ccs, [$sp]
-	subq	4, $sp
-	ei			; Allow IRQs while handling system call
-	move	$spc, [$sp]
-	subq	4, $sp
-	move	$mof, [$sp]
-	subq	4, $sp
-	move	$srs, [$sp]
-	subq	4, $sp
-	move.d	$acr, [$sp]
-	subq	14*4, $sp	; Make room for R0-R13.
-	movem	$r13, [$sp]	; Push R0-R13
-	subq	4, $sp
-	move.d	$r10, [$sp]	; Push orig_r10.
 
-; Set S-bit when kernel debugging to keep hardware breakpoints active.
+	sub.d	92, $sp		; Skip EXS and EDA.
+	movem	$r13, [$sp]
+	move.d	$sp, $r8
+	addq	14*4, $r8
+	move.d	$acr, $r0
+	move	$srs, $r1
+	move	$mof, $r2
+	move	$spc, $r3
+	move	$ccs, $r4
+	move	$srp, $r5
+	move	$erp, $r6
+	subq	4, $sp
+	movem	$r6, [$r8]
+	ei			; Enable interrupts while processing syscalls.
+	move.d	$r10, [$sp]
+
+	; Set S-bit when kernel debugging to keep hardware breakpoints active.
 #ifdef CONFIG_ETRAX_KGDB
 	move $ccs, $r0
 	or.d (1<<9), $r0
@@ -217,7 +220,9 @@ ret_from_sys_call:
 	and.d	_TIF_ALLWORK_MASK, $r1
 	bne	_syscall_exit_work
 	nop
+	.size	system_call, . - system_call
 
+	.type	_Rexit,@function
 _Rexit:
 	;; This epilogue MUST match the prologues in multiple_interrupt, irq.h
 	;; and ptregs.h.
@@ -234,10 +239,12 @@ _Rexit:
 	addq    8, $sp		; Skip EXS, EDA.
 	jump	$erp
 	rfe			; Restore condition code stack in delay-slot.
+	.size	_Rexit, . - _Rexit
 
 	;; We get here after doing a syscall if extra work might need to be done
 	;; perform syscall exit tracing if needed.
 
+	.type	_syscall_exit_work,@function
 _syscall_exit_work:
 	;; R0 contains current at this point and irq's are disabled.
 
@@ -253,14 +260,18 @@ _syscall_exit_work:
 	move.d	$r1, $r9
 	ba	_resume_userspace
 	nop
+	.size	_syscall_exit_work, . - _syscall_exit_work
 
+	.type	_work_pending,@function
 _work_pending:
 	addoq	+TI_flags, $r0, $acr
 	move.d	[$acr], $r10
 	btstq	TIF_NEED_RESCHED, $r10	; Need resched?
 	bpl	_work_notifysig		; No, must be signal/notify.
 	nop
+	.size	_work_pending, . - _work_pending
 
+	.type	_work_resched,@function
 _work_resched:
 	move.d	$r9, $r1		; Preserve R9.
 	jsr	schedule
@@ -276,7 +287,9 @@ _work_resched:
 	btstq	TIF_NEED_RESCHED, $r1
 	bmi	_work_resched		; current->work.need_resched.
 	nop
+	.size	_work_resched, . - _work_resched
 
+	.type	_work_notifysig,@function
 _work_notifysig:
 	;; Deal with pending signals and notify-resume requests.
 
@@ -288,6 +301,7 @@ _work_notifysig:
 
 	ba _Rexit
 	nop
+	.size	_work_notifysig, . - _work_notifysig
 
 	;; We get here as a sidetrack when we've entered a syscall with the
 	;; trace-bit set. We need to call do_syscall_trace and then continue
@@ -329,41 +343,43 @@ _syscall_trace_entry:
 	;;
 	;; Returns old current in R10.
 
+	.type	resume,@function
 resume:
-	subq	4, $sp
-	move	$srp, [$sp]		; Keep old/new PC on the stack.
+	subq	4, $sp			; Make space for srp.
+
 	add.d	$r12, $r10		; R10 = current tasks tss.
 	addoq	+THREAD_ccs, $r10, $acr
+	move	$srp, [$sp]		; Keep old/new PC on the stack.
 	move	$ccs, [$acr]		; Save IRQ enable state.
 	di
 
 	addoq	+THREAD_usp, $r10, $acr
+	subq	10*4, $sp		; Make room for R9.
 	move	$usp, [$acr]		; Save user-mode stackpointer.
 
 	;; See copy_thread for the reason why register R9 is saved.
-	subq	10*4, $sp
 	movem	$r9, [$sp]		; Save non-scratch registers and R9.
 
 	addoq	+THREAD_ksp, $r10, $acr
+	move.d	$sp, $r10		; Return last running task in R10.
 	move.d	$sp, [$acr]		; Save kernel SP for old task.
 
-	move.d	$sp, $r10		; Return last running task in R10.
 	and.d   -8192, $r10		; Get thread_info from stackpointer.
 	addoq	+TI_task, $r10, $acr
-	move.d	[$acr], $r10		; Get task.
 	add.d	$r12, $r11		; Find the new tasks tss.
+	move.d	[$acr], $r10		; Get task.
 	addoq	+THREAD_ksp, $r11, $acr
 	move.d	[$acr], $sp		; Switch to new stackframe.
+	addoq	+THREAD_usp, $r11, $acr
 	movem	[$sp+], $r9		; Restore non-scratch registers and R9.
 
-	addoq	+THREAD_usp, $r11, $acr
 	move	[$acr], $usp		; Restore user-mode stackpointer.
 
 	addoq	+THREAD_ccs, $r11, $acr
+	move.d	[$sp+], $r11
+	jump	$r11			; Restore PC.
 	move	[$acr], $ccs		; Restore IRQ enable status.
-	move.d	[$sp+], $acr
-	jump	$acr			; Restore PC.
-	nop
+	.size	resume, . - resume
 
 nmi_interrupt:
 
@@ -426,6 +442,7 @@ spurious_interrupt:
 	;; time. Jump to the first set interrupt bit in a priotiry fashion. The
 	;; hardware will call the unserved interrupts after the handler
 	;; finishes.
+	.type	multiple_interrupt, @function
 multiple_interrupt:
 	;; This prologue MUST match the one in irq.h and the struct in ptregs.h!
 	subq	12, $sp		; Skip EXS, EDA.
@@ -458,6 +475,7 @@ multiple_interrupt:
 	move.d	$sp, $r10
 	jump    ret_from_intr
 	nop
+	.size	multiple_interrupt, . - multiple_interrupt
 
 do_sigtrap:
 	;; Sigtraps the process that executed the BREAK instruction. Creates a
@@ -514,11 +532,13 @@ _ugdb_handle_exception:
 	move.d	[$sp+], $r0		; Restore R0 in delay slot.
 
 	.global kernel_execve
+	.type	kernel_execve,@function
 kernel_execve:
 	move.d __NR_execve, $r9
 	break 13
 	ret
 	nop
+	.size	kernel_execve, . - kernel_execve
 
 	.data
 
diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S
index 76266f80a5f1..5d502b9ab56d 100644
--- a/arch/cris/arch-v32/kernel/head.S
+++ b/arch/cris/arch-v32/kernel/head.S
@@ -69,7 +69,13 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
 	;;
 	;; Note; 3 cycles is needed for a bank-select to take effect. Further;
 	;; bank 1 is the instruction MMU, bank 2 is the data MMU.
-#ifndef CONFIG_ETRAX_VCS_SIM
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+	move.d	REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)	\
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)	\
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 5)     \
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
+#elif !defined(CONFIG_ETRAX_VCS_SIM)
 	move.d	REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)	\
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)	\
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
@@ -88,7 +94,39 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
 
 	;; Enable certain page protections and setup linear mapping
 	;; for f,e,c,b,4,0.
-#ifndef CONFIG_ETRAX_VCS_SIM
+
+	;; ARTPEC-3:
+	;; c,d used for linear kernel mapping, up to 512 MB
+	;; e used for vmalloc
+	;; f unused, but page mapped to get page faults
+
+	;; ETRAX FS:
+	;; c used for linear kernel mapping, up to 256 MB
+	;; d used for vmalloc
+	;; e,f used for memory-mapped NOR flash
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+	move.d	REG_STATE(mmu, rw_mm_cfg, we, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, acc, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, ex, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, inv, on)            \
+		| REG_STATE(mmu, rw_mm_cfg, seg_f, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_e, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_d, linear)      \
+		| REG_STATE(mmu, rw_mm_cfg, seg_c, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_b, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_a, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_9, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_8, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_7, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_6, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_5, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_4, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_3, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_2, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_1, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
+#elif !defined(CONFIG_ETRAX_VCS_SIM)
 	move.d	REG_STATE(mmu, rw_mm_cfg, we, on)		\
 		| REG_STATE(mmu, rw_mm_cfg, acc, on)		\
 		| REG_STATE(mmu, rw_mm_cfg, ex, on)		\
@@ -329,7 +367,7 @@ _no_romfs_in_flash:
 	;; For jffs2, a jhead is prepended which contains with magic and length.
 	;; The jhead is not part of the jffs2 partition however.
 #ifndef CONFIG_ETRAXFS_SIM
-	move.d	__vmlinux_end, $r0
+	move.d	__bss_start, $r0
 #else
 	move.d	__end, $r0
 #endif
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index 0b1febe44aa3..2ed48ae3d313 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -97,7 +97,11 @@ extern void breakh_BUG(void);
 /*
  * Build the IRQ handler stubs using macros from irq.h.
  */
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+BUILD_TIMER_IRQ(0x31, 0)
+#else
 BUILD_IRQ(0x31)
+#endif
 BUILD_IRQ(0x32)
 BUILD_IRQ(0x33)
 BUILD_IRQ(0x34)
@@ -123,7 +127,11 @@ BUILD_IRQ(0x47)
 BUILD_IRQ(0x48)
 BUILD_IRQ(0x49)
 BUILD_IRQ(0x4a)
+#ifdef CONFIG_ETRAXFS
+BUILD_TIMER_IRQ(0x4b, 0)
+#else
 BUILD_IRQ(0x4b)
+#endif
 BUILD_IRQ(0x4c)
 BUILD_IRQ(0x4d)
 BUILD_IRQ(0x4e)
@@ -199,25 +207,20 @@ block_irq(int irq, int cpu)
         unsigned long flags;
 
 	spin_lock_irqsave(&irq_lock, flags);
-	if (irq - FIRST_IRQ < 32)
+	/* Remember, 1 let thru, 0 block. */
+	if (irq - FIRST_IRQ < 32) {
 		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
 			rw_mask, 0);
-	else
-		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
-			rw_mask, 1);
-
-	/* Remember; 1 let thru, 0 block. */
-	if (irq - FIRST_IRQ < 32)
 		intr_mask &= ~(1 << (irq - FIRST_IRQ));
-	else
-		intr_mask &= ~(1 << (irq - FIRST_IRQ - 32));
-
-	if (irq - FIRST_IRQ < 32)
 		REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
 			0, intr_mask);
-	else
+	} else {
+		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
+			rw_mask, 1);
+		intr_mask &= ~(1 << (irq - FIRST_IRQ - 32));
 		REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
 			1, intr_mask);
+	}
         spin_unlock_irqrestore(&irq_lock, flags);
 }
 
@@ -228,26 +231,20 @@ unblock_irq(int irq, int cpu)
         unsigned long flags;
 
         spin_lock_irqsave(&irq_lock, flags);
-	if (irq - FIRST_IRQ < 32)
+	/* Remember, 1 let thru, 0 block. */
+	if (irq - FIRST_IRQ < 32) {
 		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
 			rw_mask, 0);
-	else
-		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
-			rw_mask, 1);
-
-	/* Remember; 1 let thru, 0 block. */
-	if (irq - FIRST_IRQ < 32)
 		intr_mask |= (1 << (irq - FIRST_IRQ));
-	else
-		intr_mask |= (1 << (irq - FIRST_IRQ - 32));
-
-	if (irq - FIRST_IRQ < 32)
 		REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
 			0, intr_mask);
-	else
+	} else {
+		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
+			rw_mask, 1);
+		intr_mask |= (1 << (irq - FIRST_IRQ - 32));
 		REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
 			1, intr_mask);
-
+	}
         spin_unlock_irqrestore(&irq_lock, flags);
 }
 
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index c981fd663323..6b653323d796 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -174,10 +174,10 @@
 #include <asm/ptrace.h>
 
 #include <asm/irq.h>
-#include <arch/hwregs/reg_map.h>
-#include <arch/hwregs/reg_rdwr.h>
-#include <arch/hwregs/intr_vect_defs.h>
-#include <arch/hwregs/ser_defs.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/intr_vect_defs.h>
+#include <hwregs/ser_defs.h>
 
 /* From entry.S. */
 extern void gdb_handle_exception(void);
@@ -988,26 +988,26 @@ stub_is_stopped(int sigval)
 	}
 	/* Only send PC, frame and stack pointer. */
 	read_register(PC, &reg_cont);
-	ptr = pack_hex_byte(PC);
+	ptr = pack_hex_byte(ptr, PC);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
 	*ptr++ = ';';
 
 	read_register(R8, &reg_cont);
-	ptr = pack_hex_byte(R8);
+	ptr = pack_hex_byte(ptr, R8);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
 	*ptr++ = ';';
 
 	read_register(SP, &reg_cont);
-	ptr = pack_hex_byte(SP);
+	ptr = pack_hex_byte(ptr, SP);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
 	*ptr++ = ';';
 
 	/* Send ERP as well; this will save us an entire register fetch in some cases. */
         read_register(ERP, &reg_cont);
-	ptr = pack_hex_byte(ERP);
+	ptr = pack_hex_byte(ptr, ERP);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
         *ptr++ = ';';
diff --git a/arch/cris/arch-v32/kernel/kgdb_asm.S b/arch/cris/arch-v32/kernel/kgdb_asm.S
index eba93e7e4aad..f3a47605902a 100644
--- a/arch/cris/arch-v32/kernel/kgdb_asm.S
+++ b/arch/cris/arch-v32/kernel/kgdb_asm.S
@@ -5,7 +5,7 @@
  * port exceptions for kernel debugging purposes.
  */
 
-#include <arch/hwregs/intr_vect.h>
+#include <hwregs/intr_vect.h>
 
 	;; Exported functions.
 	.globl kgdb_handle_exception
diff --git a/arch/cris/arch-v32/kernel/pinmux.c b/arch/cris/arch-v32/kernel/pinmux.c
deleted file mode 100644
index f6f3637a4194..000000000000
--- a/arch/cris/arch-v32/kernel/pinmux.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Allocator for I/O pins. All pins are allocated to GPIO at bootup.
- * Unassigned pins and GPIO pins can be allocated to a fixed interface
- * or the I/O processor instead.
- *
- * Copyright (c) 2004 Axis Communications AB.
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <arch/hwregs/reg_map.h>
-#include <arch/hwregs/reg_rdwr.h>
-#include <arch/pinmux.h>
-#include <arch/hwregs/pinmux_defs.h>
-
-#undef DEBUG
-
-#define PORT_PINS 18
-#define PORTS 4
-
-static char pins[PORTS][PORT_PINS];
-static DEFINE_SPINLOCK(pinmux_lock);
-
-static void crisv32_pinmux_set(int port);
-
-int
-crisv32_pinmux_init(void)
-{
-	static int initialized = 0;
-
-	if (!initialized) {
-		reg_pinmux_rw_pa pa = REG_RD(pinmux, regi_pinmux, rw_pa);
-		initialized = 1;
-		pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 =
-		pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes;
-		REG_WR(pinmux, regi_pinmux, rw_pa, pa);
-		crisv32_pinmux_alloc(PORT_B, 0, PORT_PINS - 1, pinmux_gpio);
-		crisv32_pinmux_alloc(PORT_C, 0, PORT_PINS - 1, pinmux_gpio);
-		crisv32_pinmux_alloc(PORT_D, 0, PORT_PINS - 1, pinmux_gpio);
-		crisv32_pinmux_alloc(PORT_E, 0, PORT_PINS - 1, pinmux_gpio);
-	}
-
-	return 0;
-}
-
-int
-crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode)
-{
-	int i;
-	unsigned long flags;
-
-	crisv32_pinmux_init();
-
-	if (port > PORTS || port < 0)
-		return -EINVAL;
-
-	spin_lock_irqsave(&pinmux_lock, flags);
-
-	for (i = first_pin; i <= last_pin; i++)
-	{
-		if ((pins[port][i] != pinmux_none) && (pins[port][i] != pinmux_gpio) &&
-		    (pins[port][i] != mode))
-		{
-			spin_unlock_irqrestore(&pinmux_lock, flags);
-#ifdef DEBUG
-			panic("Pinmux alloc failed!\n");
-#endif
-			return -EPERM;
-		}
-	}
-
-	for (i = first_pin; i <= last_pin; i++)
-		pins[port][i] = mode;
-
-	crisv32_pinmux_set(port);
-
-	spin_unlock_irqrestore(&pinmux_lock, flags);
-
-	return 0;
-}
-
-int
-crisv32_pinmux_alloc_fixed(enum fixed_function function)
-{
-	int ret = -EINVAL;
-	char saved[sizeof pins];
-	unsigned long flags;
-
-	spin_lock_irqsave(&pinmux_lock, flags);
-
-	/* Save internal data for recovery */
-	memcpy(saved, pins, sizeof pins);
-
-	reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
-
-	switch(function)
-	{
-	case pinmux_ser1:
-		ret = crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed);
-		hwprot.ser1 = regk_pinmux_yes;
-		break;
-	case pinmux_ser2:
-		ret = crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed);
-		hwprot.ser2 = regk_pinmux_yes;
-		break;
-	case pinmux_ser3:
-		ret = crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed);
-		hwprot.ser3 = regk_pinmux_yes;
-		break;
-	case pinmux_sser0:
-		ret = crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
-		hwprot.sser0 = regk_pinmux_yes;
-		break;
-	case pinmux_sser1:
-		ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
-		hwprot.sser1 = regk_pinmux_yes;
-		break;
-	case pinmux_ata0:
-		ret = crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed);
-		hwprot.ata0 = regk_pinmux_yes;
-		break;
-	case pinmux_ata1:
-		ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed);
-		hwprot.ata1 = regk_pinmux_yes;
-		break;
-	case pinmux_ata2:
-		ret = crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed);
-		hwprot.ata2 = regk_pinmux_yes;
-		break;
-	case pinmux_ata3:
-		ret = crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed);
-		hwprot.ata2 = regk_pinmux_yes;
-		break;
-	case pinmux_ata:
-		ret = crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed);
-		hwprot.ata = regk_pinmux_yes;
-		break;
-	case pinmux_eth1:
-		ret = crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed);
-		hwprot.eth1 = regk_pinmux_yes;
-		hwprot.eth1_mgm = regk_pinmux_yes;
-		break;
-	case pinmux_timer:
-		ret = crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
-		hwprot.timer = regk_pinmux_yes;
-		spin_unlock_irqrestore(&pinmux_lock, flags);
-		return ret;
-	}
-
-	if (!ret)
-		REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
-	else
-		memcpy(pins, saved, sizeof pins);
-
-  spin_unlock_irqrestore(&pinmux_lock, flags);
-
-  return ret;
-}
-
-void
-crisv32_pinmux_set(int port)
-{
-	int i;
-	int gpio_val = 0;
-	int iop_val = 0;
-
-	for (i = 0; i < PORT_PINS; i++)
-	{
-		if (pins[port][i] == pinmux_gpio)
-			gpio_val |= (1 << i);
-		else if (pins[port][i] == pinmux_iop)
-			iop_val |= (1 << i);
-	}
-
-	REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_gio + 8*port, gpio_val);
-	REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_iop + 8*port, iop_val);
-
-#ifdef DEBUG
-       crisv32_pinmux_dump();
-#endif
-}
-
-int
-crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
-{
-	int i;
-	unsigned long flags;
-
-	crisv32_pinmux_init();
-
-	if (port > PORTS || port < 0)
-		return -EINVAL;
-
-	spin_lock_irqsave(&pinmux_lock, flags);
-
-	for (i = first_pin; i <= last_pin; i++)
-		pins[port][i] = pinmux_none;
-
-	crisv32_pinmux_set(port);
-	spin_unlock_irqrestore(&pinmux_lock, flags);
-
-	return 0;
-}
-
-void
-crisv32_pinmux_dump(void)
-{
-	int i, j;
-
-	crisv32_pinmux_init();
-
-	for (i = 0; i < PORTS; i++)
-	{
-		printk("Port %c\n", 'B'+i);
-		for (j = 0; j < PORT_PINS; j++)
-			printk("  Pin %d = %d\n", j, pins[i][j]);
-	}
-}
-
-__initcall(crisv32_pinmux_init);
diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c
index 2661a9529d70..562f84718906 100644
--- a/arch/cris/arch-v32/kernel/process.c
+++ b/arch/cris/arch-v32/kernel/process.c
@@ -218,8 +218,10 @@ sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp,
 
 /* sys_execve() executes a new program. */
 asmlinkage int
-sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp,
-	struct pt_regs *regs)
+sys_execve(const char *fname,
+	   const char *const *argv,
+	   const char *const *envp, long r13, long mof, long srp,
+	   struct pt_regs *regs)
 {
 	int error;
 	char *filename;
diff --git a/arch/cris/arch-v32/kernel/ptrace.c b/arch/cris/arch-v32/kernel/ptrace.c
index f4ebd1e7d0f5..511ece94a574 100644
--- a/arch/cris/arch-v32/kernel/ptrace.c
+++ b/arch/cris/arch-v32/kernel/ptrace.c
@@ -126,9 +126,11 @@ ptrace_disable(struct task_struct *child)
 }
 
 
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
 {
 	int ret;
+	unsigned int regno = addr >> 2;
 	unsigned long __user *datap = (unsigned long __user *)data;
 
 	switch (request) {
@@ -163,10 +165,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			unsigned long tmp;
 
 			ret = -EIO;
-			if ((addr & 3) || addr < 0 || addr > PT_MAX << 2)
+			if ((addr & 3) || regno > PT_MAX)
 				break;
 
-			tmp = get_reg(child, addr >> 2);
+			tmp = get_reg(child, regno);
 			ret = put_user(tmp, datap);
 			break;
 		}
@@ -180,19 +182,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		/* Write the word at location address in the USER area. */
 		case PTRACE_POKEUSR:
 			ret = -EIO;
-			if ((addr & 3) || addr < 0 || addr > PT_MAX << 2)
+			if ((addr & 3) || regno > PT_MAX)
 				break;
 
-			addr >>= 2;
-
-			if (addr == PT_CCS) {
+			if (regno == PT_CCS) {
 				/* don't allow the tracing process to change stuff like
 				 * interrupt enable, kernel/user bit, dma enables etc.
 				 */
 				data &= CCS_MASK;
 				data |= get_reg(child, PT_CCS) & ~CCS_MASK;
 			}
-			if (put_reg(child, addr, data))
+			if (put_reg(child, regno, data))
 				break;
 			ret = 0;
 			break;
diff --git a/arch/cris/arch-v32/kernel/setup.c b/arch/cris/arch-v32/kernel/setup.c
index 72e9e8331f63..61e10ae65296 100644
--- a/arch/cris/arch-v32/kernel/setup.c
+++ b/arch/cris/arch-v32/kernel/setup.c
@@ -9,6 +9,9 @@
 #include <linux/delay.h>
 #include <linux/param.h>
 
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+
 #ifdef CONFIG_PROC_FS
 
 #define HAS_FPU         0x0001
@@ -43,14 +46,15 @@ static struct cpu_info cpinfo[] = {
 
 	{"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB
 			        | HAS_MMU},
-
+#ifdef CONFIG_ETRAXFS
 	{"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU},
-
+#else
+	{"ARTPEC-3", 32, 32, HAS_ETHERNET100 | HAS_MMU},
+#endif
 	{"Unknown", 0, 0, 0}
 };
 
-int
-show_cpuinfo(struct seq_file *m, void *v)
+int show_cpuinfo(struct seq_file *m, void *v)
 {
 	int i;
 	int cpu = (int)v - 1;
@@ -107,9 +111,63 @@ show_cpuinfo(struct seq_file *m, void *v)
 
 #endif /* CONFIG_PROC_FS */
 
-void
-show_etrax_copyright(void)
+void show_etrax_copyright(void)
+{
+#ifdef CONFIG_ETRAXFS
+	printk(KERN_INFO "Linux/CRISv32 port on ETRAX FS "
+		"(C) 2003, 2004 Axis Communications AB\n");
+#else
+	printk(KERN_INFO "Linux/CRISv32 port on ARTPEC-3 "
+		"(C) 2003-2009 Axis Communications AB\n");
+#endif
+}
+
+static struct i2c_board_info __initdata i2c_info[] = {
+	{I2C_BOARD_INFO("camblock", 0x43)},
+	{I2C_BOARD_INFO("tmp100", 0x48)},
+	{I2C_BOARD_INFO("tmp100", 0x4A)},
+	{I2C_BOARD_INFO("tmp100", 0x4C)},
+	{I2C_BOARD_INFO("tmp100", 0x4D)},
+	{I2C_BOARD_INFO("tmp100", 0x4E)},
+#ifdef CONFIG_RTC_DRV_PCF8563
+	{I2C_BOARD_INFO("pcf8563", 0x51)},
+#endif
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	{I2C_BOARD_INFO("vgpio", 0x20)},
+	{I2C_BOARD_INFO("vgpio", 0x21)},
+#endif
+	{I2C_BOARD_INFO("pca9536", 0x41)},
+	{I2C_BOARD_INFO("fnp300", 0x40)},
+	{I2C_BOARD_INFO("fnp300", 0x42)},
+	{I2C_BOARD_INFO("adc101", 0x54)},
+};
+
+static struct i2c_board_info __initdata i2c_info2[] = {
+	{I2C_BOARD_INFO("camblock", 0x43)},
+	{I2C_BOARD_INFO("tmp100", 0x48)},
+	{I2C_BOARD_INFO("tmp100", 0x4A)},
+	{I2C_BOARD_INFO("tmp100", 0x4C)},
+	{I2C_BOARD_INFO("tmp100", 0x4D)},
+	{I2C_BOARD_INFO("tmp100", 0x4E)},
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	{I2C_BOARD_INFO("vgpio", 0x20)},
+	{I2C_BOARD_INFO("vgpio", 0x21)},
+#endif
+	{I2C_BOARD_INFO("pca9536", 0x41)},
+	{I2C_BOARD_INFO("fnp300", 0x40)},
+	{I2C_BOARD_INFO("fnp300", 0x42)},
+	{I2C_BOARD_INFO("adc101", 0x54)},
+};
+
+static struct i2c_board_info __initdata i2c_info3[] = {
+	{I2C_BOARD_INFO("adc101", 0x54)},
+};
+
+static int __init etrax_init(void)
 {
-	printk(KERN_INFO
-               "Linux/CRISv32 port on ETRAX FS (C) 2003, 2004 Axis Communications AB\n");
+	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
+	i2c_register_board_info(1, i2c_info2, ARRAY_SIZE(i2c_info2));
+	i2c_register_board_info(2, i2c_info3, ARRAY_SIZE(i2c_info3));
+	return 0;
 }
+arch_initcall(etrax_init);
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
index 0b7e3f143281..b3a05ae56214 100644
--- a/arch/cris/arch-v32/kernel/signal.c
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -587,7 +587,7 @@ do_signal(int canrestart, struct pt_regs *regs)
 		}
 
 		if (regs->r10 == -ERESTART_RESTARTBLOCK){
-			regs->r10 = __NR_restart_syscall;
+			regs->r9 = __NR_restart_syscall;
 			regs->erp -= 2;
 		}
 	}
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index 1ee0e1010228..a545211e999d 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -1,13 +1,13 @@
 /*
  *  linux/arch/cris/arch-v32/kernel/time.c
  *
- *  Copyright (C) 2003-2007 Axis Communications AB
+ *  Copyright (C) 2003-2010 Axis Communications AB
  *
  */
 
 #include <linux/timex.h>
 #include <linux/time.h>
-#include <linux/jiffies.h>
+#include <linux/clocksource.h>
 #include <linux/interrupt.h>
 #include <linux/swap.h>
 #include <linux/sched.h>
@@ -36,6 +36,30 @@
 /* Number of 763 counts before watchdog bites */
 #define ETRAX_WD_CNT		((2*ETRAX_WD_HZ)/HZ + 1)
 
+/* Register the continuos readonly timer available in FS and ARTPEC-3.  */
+static cycle_t read_cont_rotime(struct clocksource *cs)
+{
+	return (u32)REG_RD(timer, regi_timer0, r_time);
+}
+
+static struct clocksource cont_rotime = {
+	.name   = "crisv32_rotime",
+	.rating = 300,
+	.read   = read_cont_rotime,
+	.mask   = CLOCKSOURCE_MASK(32),
+	.shift  = 10,
+	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init etrax_init_cont_rotime(void)
+{
+	cont_rotime.mult = clocksource_khz2mult(100000, cont_rotime.shift);
+	clocksource_register(&cont_rotime);
+	return 0;
+}
+arch_initcall(etrax_init_cont_rotime);
+
+
 unsigned long timer_regs[NR_CPUS] =
 {
 	regi_timer0,
@@ -67,43 +91,6 @@ unsigned long get_ns_in_jiffie(void)
 	return ns;
 }
 
-unsigned long do_slow_gettimeoffset(void)
-{
-	unsigned long count;
-	unsigned long usec_count = 0;
-
-	/* For the first call after boot */
-	static unsigned long count_p = TIMER0_DIV;
-	static unsigned long jiffies_p = 0;
-
-	/* Cache volatile jiffies temporarily; we have IRQs turned off. */
-	unsigned long jiffies_t;
-
-	/* The timer interrupt comes from Etrax timer 0. In order to get
-	 * better precision, we check the current value. It might have
-	 * underflowed already though. */
-	count = REG_RD(timer, regi_timer0, r_tmr0_data);
-	jiffies_t = jiffies;
-
-	/* Avoiding timer inconsistencies (they are rare, but they happen)
-	 * There is one problem that must be avoided here:
-	 *	1. the timer counter underflows
-	 */
-	if( jiffies_t == jiffies_p ) {
-		if( count > count_p ) {
-			/* Timer wrapped, use new count and prescale.
-			 * Increase the time corresponding to one jiffy.
-			 */
-			usec_count = 1000000/HZ;
-		}
-	} else
-		jiffies_p = jiffies_t;
-        count_p = count;
-	/* Convert timer value to usec */
-	/* 100 MHz timer, divide by 100 to get usec */
-	usec_count +=  (TIMER0_DIV - count) / 100;
-	return usec_count;
-}
 
 /* From timer MDS describing the hardware watchdog:
  * 4.3.1 Watchdog Operation
@@ -126,8 +113,7 @@ static short int watchdog_key = 42;  /* arbitrary 7 bit number */
  * is used though, so set this really low. */
 #define WATCHDOG_MIN_FREE_PAGES 8
 
-void
-reset_watchdog(void)
+void reset_watchdog(void)
 {
 #if defined(CONFIG_ETRAX_WATCHDOG)
 	reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
@@ -147,8 +133,7 @@ reset_watchdog(void)
 
 /* stop the watchdog - we still need the correct key */
 
-void
-stop_watchdog(void)
+void stop_watchdog(void)
 {
 #if defined(CONFIG_ETRAX_WATCHDOG)
 	reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
@@ -162,8 +147,7 @@ stop_watchdog(void)
 
 extern void show_registers(struct pt_regs *regs);
 
-void
-handle_watchdog_bite(struct pt_regs* regs)
+void handle_watchdog_bite(struct pt_regs *regs)
 {
 #if defined(CONFIG_ETRAX_WATCHDOG)
 	extern int cause_of_death;
@@ -203,8 +187,7 @@ handle_watchdog_bite(struct pt_regs* regs)
  */
 extern void cris_do_profile(struct pt_regs *regs);
 
-static inline irqreturn_t
-timer_interrupt(int irq, void *dev_id)
+static inline irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct pt_regs *regs = get_irq_regs();
 	int cpu = smp_processor_id();
@@ -233,7 +216,9 @@ timer_interrupt(int irq, void *dev_id)
 		return IRQ_HANDLED;
 
 	/* Call the real timer interrupt handler */
+	write_seqlock(&xtime_lock);
 	do_timer(1);
+	write_sequnlock(&xtime_lock);
         return IRQ_HANDLED;
 }
 
@@ -246,8 +231,7 @@ static struct irqaction irq_timer = {
 	.name = "timer"
 };
 
-void __init
-cris_timer_init(void)
+void __init cris_timer_init(void)
 {
 	int cpu = smp_processor_id();
 	reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 };
@@ -273,8 +257,7 @@ cris_timer_init(void)
 	REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask);
 }
 
-void __init
-time_init(void)
+void __init time_init(void)
 {
 	reg_intr_vect_rw_mask intr_mask;
 
diff --git a/arch/cris/arch-v32/kernel/traps.c b/arch/cris/arch-v32/kernel/traps.c
index 9003e382cada..8bbe09c93132 100644
--- a/arch/cris/arch-v32/kernel/traps.c
+++ b/arch/cris/arch-v32/kernel/traps.c
@@ -9,8 +9,7 @@
 #include <hwregs/intr_vect_defs.h>
 #include <asm/irq.h>
 
-void
-show_registers(struct pt_regs *regs)
+void show_registers(struct pt_regs *regs)
 {
 	/*
 	 * It's possible to use either the USP register or current->thread.usp.
@@ -101,8 +100,7 @@ bad_value:
 	}
 }
 
-void
-arch_enable_nmi(void)
+void arch_enable_nmi(void)
 {
 	unsigned long flags;
 
diff --git a/arch/cris/arch-v32/lib/checksum.S b/arch/cris/arch-v32/lib/checksum.S
index 87f3fd71ab10..4a72a94a49ad 100644
--- a/arch/cris/arch-v32/lib/checksum.S
+++ b/arch/cris/arch-v32/lib/checksum.S
@@ -6,6 +6,7 @@
  */
 
 	.globl	csum_partial
+	.type   csum_partial,@function
 csum_partial:
 
 	;; r10 - src
@@ -83,3 +84,5 @@ _do_byte:
 	addu.b	[$r10],$r12
 	ret
 	move.d	$r12,$r10
+
+	.size   csum_partial, .-csum_partial
diff --git a/arch/cris/arch-v32/lib/checksumcopy.S b/arch/cris/arch-v32/lib/checksumcopy.S
index 21aabe91489b..54e209f18b06 100644
--- a/arch/cris/arch-v32/lib/checksumcopy.S
+++ b/arch/cris/arch-v32/lib/checksumcopy.S
@@ -9,6 +9,7 @@
  */
 
 	.globl	csum_partial_copy_nocheck
+	.type   csum_partial_copy_nocheck,@function
 csum_partial_copy_nocheck:
 
 	;; r10 - src
@@ -89,3 +90,5 @@ _do_byte:
 	move.b	$r9,[$r11]
 	ret
 	move.d	$r13,$r10
+
+	.size   csum_partial_copy_nocheck, . - csum_partial_copy_nocheck
diff --git a/arch/cris/arch-v32/lib/spinlock.S b/arch/cris/arch-v32/lib/spinlock.S
index 79087ef59a1c..fe610b9d775f 100644
--- a/arch/cris/arch-v32/lib/spinlock.S
+++ b/arch/cris/arch-v32/lib/spinlock.S
@@ -6,7 +6,9 @@
 
 
 	.global cris_spin_lock
+	.type   cris_spin_lock,@function
 	.global cris_spin_trylock
+	.type   cris_spin_trylock,@function
 
 	.text
 
@@ -22,6 +24,8 @@ cris_spin_lock:
 	ret
 	nop
 
+	.size   cris_spin_lock, . - cris_spin_lock
+
 cris_spin_trylock:
 	clearf	p
 1:	move.b	[$r10], $r11
@@ -31,3 +35,6 @@ cris_spin_trylock:
         clearf	p
 	ret
 	movu.b	$r11,$r10
+
+	.size   cris_spin_trylock, . - cris_spin_trylock
+
diff --git a/arch/cris/arch-v32/mach-a3/Kconfig b/arch/cris/arch-v32/mach-a3/Kconfig
index a4df06d5997a..7796aafc711e 100644
--- a/arch/cris/arch-v32/mach-a3/Kconfig
+++ b/arch/cris/arch-v32/mach-a3/Kconfig
@@ -33,6 +33,10 @@ config ETRAX_DDR2_CONFIG
 	hex "DDR2 config"
 	default "0"
 
+config ETRAX_DDR2_LATENCY
+	hex "DDR2 latency"
+	default "0"
+
 config ETRAX_PIO_CE0_CFG
        hex "PIO CE0 configuration"
        default "0"
diff --git a/arch/cris/arch-v32/mach-a3/dram_init.S b/arch/cris/arch-v32/mach-a3/dram_init.S
index 94d6b41cb299..ec8648be32d3 100644
--- a/arch/cris/arch-v32/mach-a3/dram_init.S
+++ b/arch/cris/arch-v32/mach-a3/dram_init.S
@@ -24,11 +24,21 @@
 
 	;; Refer to ddr2 MDS for initialization sequence
 
+	; 2. Wait 200us
+	move.d   10000, $r2
+1:	bne      1b
+	subq     1, $r2
+
 	; Start clock
 	move.d   REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_cfg), $r0
 	move.d   REG_STATE(ddr2, rw_phy_cfg, en, yes), $r1
 	move.d   $r1, [$r0]
 
+	; 2. Wait 200us
+	move.d   10000, $r2
+1:	bne      1b
+	subq     1, $r2
+
 	; Reset phy and start calibration
 	move.d   REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_ctrl), $r0
 	move.d   REG_STATE(ddr2, rw_phy_ctrl, rst, yes) | \
@@ -52,6 +62,10 @@ do_cmd:
 	lslq     16, $r1
 	or.d     $r3, $r1
 	move.d   $r1, [$r0]
+	; 2. Wait 200us
+	move.d   10000, $r4
+1:	bne      1b
+	subq     1, $r4
 	cmp.d    sdram_commands_end, $r2
 	blo      command_loop
 	nop
@@ -63,7 +77,7 @@ do_cmd:
 
 	; Set latency
 	move.d   REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency), $r0
-	move.d   0x13, $r1
+	move.d   CONFIG_ETRAX_DDR2_LATENCY, $r1
 	move.d   $r1, [$r0]
 
 	; Set configuration
diff --git a/arch/cris/arch-v32/mach-a3/hw_settings.S b/arch/cris/arch-v32/mach-a3/hw_settings.S
index 258a6329cd4a..0145725a1ce5 100644
--- a/arch/cris/arch-v32/mach-a3/hw_settings.S
+++ b/arch/cris/arch-v32/mach-a3/hw_settings.S
@@ -31,6 +31,8 @@
 	; Register values
 	.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_cfg)
 	.dword CONFIG_ETRAX_DDR2_CONFIG
+	.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency)
+	.dword CONFIG_ETRAX_DDR2_LATENCY
 	.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_timing)
 	.dword CONFIG_ETRAX_DDR2_TIMING
 	.dword CONFIG_ETRAX_DDR2_MRS
diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c
index caeb921a92ea..0768bc409ca8 100644
--- a/arch/cris/arch-v32/mm/init.c
+++ b/arch/cris/arch-v32/mm/init.c
@@ -27,8 +27,7 @@ extern void tlb_init(void);
  * at kseg_4 thus the ksegs are set up again. Also clear the TLB and do various
  * other paging stuff.
  */
-void __init
-cris_mmu_init(void)
+void __init cris_mmu_init(void)
 {
 	unsigned long mmu_config;
 	unsigned long mmu_kbase_hi;
@@ -55,14 +54,23 @@ cris_mmu_init(void)
 	/* Initialise the TLB. Function found in tlb.c. */
 	tlb_init();
 
-	/* Enable exceptions and initialize the kernel segments. */
+	/*
+	 * Enable exceptions and initialize the kernel segments.
+	 * See head.S for differences between ARTPEC-3 and ETRAX FS.
+	 */
 	mmu_config = ( REG_STATE(mmu, rw_mm_cfg, we, on)        |
 		       REG_STATE(mmu, rw_mm_cfg, acc, on)       |
 		       REG_STATE(mmu, rw_mm_cfg, ex, on)        |
 		       REG_STATE(mmu, rw_mm_cfg, inv, on)       |
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+		       REG_STATE(mmu, rw_mm_cfg, seg_f, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_e, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_d, linear) |
+#else
 		       REG_STATE(mmu, rw_mm_cfg, seg_f, linear) |
 		       REG_STATE(mmu, rw_mm_cfg, seg_e, linear) |
 		       REG_STATE(mmu, rw_mm_cfg, seg_d, page)   |
+#endif
 		       REG_STATE(mmu, rw_mm_cfg, seg_c, linear) |
 		       REG_STATE(mmu, rw_mm_cfg, seg_b, linear) |
 #ifndef CONFIG_ETRAX_VCS_SIM
@@ -81,9 +89,15 @@ cris_mmu_init(void)
 		       REG_STATE(mmu, rw_mm_cfg, seg_1, page)   |
 		       REG_STATE(mmu, rw_mm_cfg, seg_0, page));
 
+	/* See head.S for differences between ARTPEC-3 and ETRAX FS. */
 	mmu_kbase_hi = ( REG_FIELD(mmu, rw_mm_kbase_hi, base_f, 0x0) |
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+			 REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x0) |
+			 REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x5) |
+#else
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x8) |
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x0) |
+#endif
                          REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x4) |
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) |
 #ifndef CONFIG_ETRAX_VCS_SIM
@@ -129,8 +143,7 @@ cris_mmu_init(void)
 	SUPP_REG_WR(RW_GC_CFG, 0xf); /* IMMU, DMMU, ICache, DCache on */
 }
 
-void __init
-paging_init(void)
+void __init paging_init(void)
 {
 	int i;
 	unsigned long zones_size[MAX_NR_ZONES];
diff --git a/arch/cris/arch-v32/mm/intmem.c b/arch/cris/arch-v32/mm/intmem.c
index 9e8b69cdf19e..1b17d92cef8e 100644
--- a/arch/cris/arch-v32/mm/intmem.c
+++ b/arch/cris/arch-v32/mm/intmem.c
@@ -33,8 +33,8 @@ static void crisv32_intmem_init(void)
 {
 	static int initiated = 0;
 	if (!initiated) {
-		struct intmem_allocation* alloc =
-		  (struct intmem_allocation*)kmalloc(sizeof *alloc, GFP_KERNEL);
+		struct intmem_allocation* alloc;
+		alloc = kmalloc(sizeof *alloc, GFP_KERNEL);
 		INIT_LIST_HEAD(&intmem_allocations);
 		intmem_virtual = ioremap(MEM_INTMEM_START + RESERVED_SIZE,
 					 MEM_INTMEM_SIZE - RESERVED_SIZE);
@@ -62,9 +62,8 @@ void* crisv32_intmem_alloc(unsigned size, unsigned align)
 		if (allocation->status == STATUS_FREE &&
 		    allocation->size >= size + alignment) {
 			if (allocation->size > size + alignment) {
-				struct intmem_allocation* alloc =
-					(struct intmem_allocation*)
-					kmalloc(sizeof *alloc, GFP_ATOMIC);
+				struct intmem_allocation* alloc;
+				alloc = kmalloc(sizeof *alloc, GFP_ATOMIC);
 				alloc->status = STATUS_FREE;
 				alloc->size = allocation->size - size -
 					alignment;
@@ -74,9 +73,7 @@ void* crisv32_intmem_alloc(unsigned size, unsigned align)
 
 				if (alignment) {
 					struct intmem_allocation *tmp;
-					tmp = (struct intmem_allocation *)
-						kmalloc(sizeof *tmp,
-							GFP_ATOMIC);
+					tmp = kmalloc(sizeof *tmp, GFP_ATOMIC);
 					tmp->offset = allocation->offset;
 					tmp->size = alignment;
 					tmp->status = STATUS_FREE;
diff --git a/arch/cris/arch-v32/mm/mmu.S b/arch/cris/arch-v32/mm/mmu.S
index f125d912e140..72727c1d8e60 100644
--- a/arch/cris/arch-v32/mm/mmu.S
+++ b/arch/cris/arch-v32/mm/mmu.S
@@ -38,6 +38,7 @@
 ; to handle the fault.
 .macro	MMU_BUS_FAULT_HANDLER handler, mmu, we, ex
 	.globl	\handler
+	.type   \handler,"function"
 \handler:
 	SAVE_ALL
 	move	\mmu, $srs	; Select MMU support register bank
@@ -52,6 +53,7 @@
 	nop
 	ba	ret_from_intr
 	nop
+	.size   \handler, . - \handler
 .endm
 
 ; Refill handler. Three cases may occur:
@@ -84,6 +86,7 @@
 2:	.dword	0		; last_refill_cause
 	.text
 	.globl \handler
+	.type   \handler, "function"
 \handler:
 	subq	4, $sp
 ; (The pipeline stalls for one cycle; $sp used as address in the next cycle.)
@@ -196,6 +199,7 @@
 	; Return
 	ba	ret_from_intr
 	nop
+	.size   \handler, . - \handler
 .endm
 
 	; This is the MMU bus fault handlers.
diff --git a/arch/cris/boot/Makefile b/arch/cris/boot/Makefile
index 144f3afa0119..6e3b509fd7fc 100644
--- a/arch/cris/boot/Makefile
+++ b/arch/cris/boot/Makefile
@@ -3,7 +3,7 @@
 #
 
 objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
-objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss --remove-section=.note.gnu.build-id
 
 OBJCOPYFLAGS = -O binary $(objcopyflags-y)
 
diff --git a/arch/cris/boot/compressed/misc.c b/arch/cris/boot/compressed/misc.c
index 47bc190ba6d4..548d886b03d3 100644
--- a/arch/cris/boot/compressed/misc.c
+++ b/arch/cris/boot/compressed/misc.c
@@ -106,7 +106,7 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 
 static void flush_window(void);
 static void error(char *m);
-static void puts(const char *);
+static void aputs(const char *s);
 
 extern char *input_data;  /* lives in head.S */
 
@@ -137,52 +137,37 @@ static inline void serout(const char *s, reg_scope_instances regi_ser)
 
 	REG_WR(ser, regi_ser, rw_dout, dout);
 }
+#define SEROUT(S, N) \
+	do { \
+		serout(S, regi_ser ## N); \
+		s++; \
+	} while (0)
+#else
+#define SEROUT(S, N) do { \
+		while (!(*R_SERIAL ## N ## _STATUS & (1 << 5))) \
+			; \
+		*R_SERIAL ## N ## _TR_DATA = *s++; \
+	} while (0)
 #endif
 
-static void puts(const char *s)
+static void aputs(const char *s)
 {
 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
 	while (*s) {
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
-#ifdef CONFIG_ETRAX_ARCH_V32
-		serout(s, regi_ser0);
-#else
-		while (!(*R_SERIAL0_STATUS & (1 << 5)))
-			;
-		*R_SERIAL0_TR_DATA = *s++;
-#endif
+		SEROUT(s, 0);
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
-#ifdef CONFIG_ETRAX_ARCH_V32
-		serout(s, regi_ser1);
-#else
-		while (!(*R_SERIAL1_STATUS & (1 << 5)))
-			;
-		*R_SERIAL1_TR_DATA = *s++;
-#endif
+		SEROUT(s, 1);
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
-#ifdef CONFIG_ETRAX_ARCH_V32
-		serout(s, regi_ser2);
-#else
-		while (!(*R_SERIAL2_STATUS & (1 << 5)))
-			;
-		*R_SERIAL2_TR_DATA = *s++;
-#endif
+		SEROUT(s, 2);
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
-#ifdef CONFIG_ETRAX_ARCH_V32
-		serout(s, regi_ser3);
-#else
-		while (!(*R_SERIAL3_STATUS & (1 << 5)))
-			;
-		*R_SERIAL3_TR_DATA = *s++;
+		SEROUT(s, 3);
 #endif
-#endif
-		*s++;
 	}
-/* CONFIG_ETRAX_DEBUG_PORT_NULL */
-#endif
+#endif /* CONFIG_ETRAX_DEBUG_PORT_NULL */
 }
 
 void *memset(void *s, int c, size_t n)
@@ -233,9 +218,9 @@ static void flush_window(void)
 
 static void error(char *x)
 {
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted\n");
+	aputs("\n\n");
+	aputs(x);
+	aputs("\n\n -- System halted\n");
 
 	while(1);	/* Halt */
 }
@@ -378,14 +363,14 @@ void decompress_kernel(void)
 	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
 	if (revision < compile_rev) {
 #ifdef CONFIG_ETRAX_ARCH_V32
-		puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+		aputs("You need at least ETRAX FS to run Linux 2.6/crisv32\n");
 #else
-		puts("You need an ETRAX 100LX to run linux 2.6\n");
+		aputs("You need an ETRAX 100LX to run linux 2.6/crisv10\n");
 #endif
 		while(1);
 	}
 
-	puts("Uncompressing Linux...\n");
+	aputs("Uncompressing Linux...\n");
 	gunzip();
-	puts("Done. Now booting the kernel\n");
+	aputs("Done. Now booting the kernel\n");
 }
diff --git a/arch/cris/configs/artpec_3_defconfig b/arch/cris/configs/artpec_3_defconfig
index 41fe67409aab..590f72c9455d 100644
--- a/arch/cris/configs/artpec_3_defconfig
+++ b/arch/cris/configs/artpec_3_defconfig
@@ -1,582 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Mon Dec  3 11:18:54 2007
-#
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NO_IOPORT=y
-CONFIG_FORCE_MAX_ZONEORDER=6
-CONFIG_CRIS=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_GENERIC_HARDIRQS=y
 CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc"
-# CONFIG_ETRAX_WATCHDOG is not set
 CONFIG_ETRAX_FAST_TIMER=y
-# CONFIG_ETRAX_KMALLOCED_MODULES is not set
-# CONFIG_OOM_REBOOT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-
-#
-# Hardware setup
-#
-# CONFIG_ETRAX100LX is not set
-# CONFIG_ETRAX100LX_V2 is not set
-# CONFIG_SVINTO_SIM is not set
-# CONFIG_ETRAXFS is not set
 CONFIG_CRIS_MACH_ARTPEC3=y
-# CONFIG_ETRAX_VCS_SIM is not set
-# CONFIG_ETRAX_ARCH_V10 is not set
-CONFIG_ETRAX_ARCH_V32=y
 CONFIG_ETRAX_DRAM_SIZE=32
-CONFIG_ETRAX_VMEM_SIZE=8
-CONFIG_ETRAX_FLASH_BUSWIDTH=2
-CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1
 CONFIG_ETRAX_FLASH1_SIZE=4
-CONFIG_ETRAX_DEBUG_PORT0=y
-# CONFIG_ETRAX_DEBUG_PORT1 is not set
-# CONFIG_ETRAX_DEBUG_PORT2 is not set
-# CONFIG_ETRAX_DEBUG_PORT3 is not set
-# CONFIG_ETRAX_DEBUG_PORT_NULL is not set
-CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
-CONFIG_ETRAX_SERIAL_PORTS=5
 CONFIG_ETRAX_DEF_GIO_PA_OE=1c
 CONFIG_ETRAX_DEF_GIO_PA_OUT=00
 CONFIG_ETRAX_DEF_GIO_PB_OE=00000
 CONFIG_ETRAX_DEF_GIO_PB_OUT=00000
-CONFIG_ETRAX_DEF_GIO_PC_OE=00000
-CONFIG_ETRAX_DEF_GIO_PC_OUT=00000
-
-#
-# Artpec-3 options
-#
-CONFIG_ETRAX_L2CACHE=y
-CONFIG_ETRAX_DDR=y
-CONFIG_ETRAX_DDR2_MRS=0
-CONFIG_ETRAX_DDR2_TIMING=0
-CONFIG_ETRAX_DDR2_CONFIG=0
-CONFIG_ETRAX_PIO_CE0_CFG=0
-CONFIG_ETRAX_PIO_CE1_CFG=0
-CONFIG_ETRAX_PIO_CE2_CFG=0
-# CONFIG_CPU_FREQ is not set
-# CONFIG_ETRAX_NBR_LED_GRP_ZERO is not set
-CONFIG_ETRAX_NBR_LED_GRP_ONE=y
-# CONFIG_ETRAX_NBR_LED_GRP_TWO is not set
-CONFIG_ETRAX_LED_G_NET0="PA3"
-CONFIG_ETRAX_LED_R_NET0="PA4"
-CONFIG_ETRAX_V32_LED2G="PA5"
-CONFIG_ETRAX_V32_LED2R="PA6"
-CONFIG_ETRAX_V32_LED3G="PA7"
-CONFIG_ETRAX_V32_LED3R="PA7"
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Drivers for built-in interfaces
-#
 CONFIG_ETRAX_ETHERNET=y
-# CONFIG_ETRAX_IDE is not set
 CONFIG_ETRAX_AXISFLASHMAP=y
-CONFIG_ETRAX_PTABLE_SECTOR=65536
-# CONFIG_ETRAX_I2C is not set
-# CONFIG_ETRAX_GPIO is not set
-# CONFIG_ETRAX_NO_PHY is not set
-# CONFIG_ETRAX_ETHERNET_IFACE0 is not set
-# CONFIG_ETRAX_ETHERNET_GBIT is not set
-# CONFIG_ETRAXFS_SERIAL is not set
-# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
-# CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE is not set
-# CONFIG_ETRAX_NANDFLASH is not set
-# CONFIG_ETRAX_CARDBUS is not set
-# CONFIG_ETRAX_IOP_FW_LOAD is not set
-# CONFIG_ETRAX_STREAMCOPROC is not set
-# CONFIG_ETRAX_SPI_MMC is not set
-# CONFIG_ETRAX_SPI_MMC_BOARD is not set
-# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
-CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
 CONFIG_MTD_MTDRAM=y
 CONFIG_MTDRAM_TOTAL_SIZE=0
 CONFIG_MTDRAM_ERASE_SIZE=64
 CONFIG_MTDRAM_ABS_POS=0x0
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PROFILING is not set
-# CONFIG_SYSTEM_PROFILER is not set
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_DMA=y
diff --git a/arch/cris/configs/etrax-100lx_defconfig b/arch/cris/configs/etrax-100lx_defconfig
index 572f11926399..cbbcefeaa8fc 100644
--- a/arch/cris/configs/etrax-100lx_defconfig
+++ b/arch/cris/configs/etrax-100lx_defconfig
@@ -1,502 +1,23 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_NET=y
 CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_ETRAX_KGDB is not set
-# CONFIG_ETRAX_WATCHDOG is not set
-
-#
-# Hardware setup
-#
-CONFIG_ETRAX100LX=y
-# CONFIG_ETRAX100LX_V2 is not set
-# CONFIG_SVINTO_SIM is not set
-CONFIG_CRIS_LOW_MAP=y
-CONFIG_ETRAX_DRAM_VIRTUAL_BASE=60000000
-CONFIG_ETRAX_DRAM_SIZE=8
-CONFIG_ETRAX_FLASH_BUSWIDTH=2
-CONFIG_ETRAX_ROOT_DEVICE="/dev/mtdblock3"
-CONFIG_ETRAX_PA_LEDS=y
-# CONFIG_ETRAX_PB_LEDS is not set
-# CONFIG_ETRAX_CSP0_LEDS is not set
-# CONFIG_ETRAX_NO_LEDS is not set
-CONFIG_ETRAX_LED1G=2
 CONFIG_ETRAX_LED1R=2
 CONFIG_ETRAX_LED2G=2
 CONFIG_ETRAX_LED2R=2
-CONFIG_ETRAX_LED3R=2
-CONFIG_ETRAX_LED3G=2
-CONFIG_ETRAX_LED4R=2
-CONFIG_ETRAX_LED4G=2
-CONFIG_ETRAX_LED5R=2
-CONFIG_ETRAX_LED5G=2
-CONFIG_ETRAX_LED6R=2
-CONFIG_ETRAX_LED6G=2
-CONFIG_ETRAX_LED7R=2
-CONFIG_ETRAX_LED7G=2
-CONFIG_ETRAX_LED8Y=2
-CONFIG_ETRAX_LED9Y=2
-CONFIG_ETRAX_LED10Y=2
-CONFIG_ETRAX_LED11Y=2
-CONFIG_ETRAX_LED12R=2
-CONFIG_ETRAX_DEBUG_PORT0=y
-# CONFIG_ETRAX_DEBUG_PORT1 is not set
-# CONFIG_ETRAX_DEBUG_PORT2 is not set
-# CONFIG_ETRAX_DEBUG_PORT3 is not set
-CONFIG_ETRAX_RESCUE_SER0=y
-# CONFIG_ETRAX_RESCUE_SER1 is not set
-# CONFIG_ETRAX_RESCUE_SER2 is not set
-# CONFIG_ETRAX_RESCUE_SER3 is not set
-CONFIG_ETRAX_DEF_R_WAITSTATES=95a6
-CONFIG_ETRAX_DEF_R_BUS_CONFIG=104
-# CONFIG_ETRAX_SDRAM is not set
-CONFIG_ETRAX_DEF_R_DRAM_CONFIG=1a200040
-CONFIG_ETRAX_DEF_R_DRAM_TIMING=5611
 CONFIG_ETRAX_DEF_R_PORT_PA_DIR=1d
 CONFIG_ETRAX_DEF_R_PORT_PA_DATA=f0
-CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=00
 CONFIG_ETRAX_DEF_R_PORT_PB_DIR=1e
 CONFIG_ETRAX_DEF_R_PORT_PB_DATA=f3
-# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
-
-#
-# Drivers for ETRAX 100LX built-in interfaces
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
 CONFIG_ETRAX_ETHERNET=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
-CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
-# CONFIG_ETRAX_ETHERNET_LPSLAVE is not set
 CONFIG_ETRAX_SERIAL=y
 CONFIG_ETRAX_SERIAL_PORT0=y
-# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
 CONFIG_ETRAX_SERIAL_PORT1=y
-# CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_ON_PB is not set
-# CONFIG_ETRAX_SERIAL_PORT2 is not set
-# CONFIG_ETRAX_SERIAL_PORT3 is not set
-# CONFIG_ETRAX_RS485 is not set
-# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
-# CONFIG_ETRAX_IDE is not set
-CONFIG_ETRAX_AXISFLASHMAP=y
-CONFIG_ETRAX_PTABLE_SECTOR=65536
-CONFIG_MTD=y
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
 CONFIG_ETRAX_I2C=y
 CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y
-# CONFIG_ETRAX_I2C_EEPROM is not set
 CONFIG_ETRAX_GPIO=y
-CONFIG_ETRAX_PA_BUTTON_BITMASK=02
-CONFIG_ETRAX_PA_CHANGEABLE_DIR=00
-CONFIG_ETRAX_PA_CHANGEABLE_BITS=FF
-CONFIG_ETRAX_PB_CHANGEABLE_DIR=00
-CONFIG_ETRAX_PB_CHANGEABLE_BITS=FF
-# CONFIG_ETRAX_USB_HOST is not set
-# CONFIG_USB is not set
-# CONFIG_ETRAX_DS1302 is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
-
-#
-# RAM/ROM Device Drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_MTDRAM is not set
-
-#
-# Linearly Mapped Flash Device Drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_NORA is not set
-# CONFIG_MTD_PNC2000 is not set
-# CONFIG_MTD_RPXLITE is not set
-# CONFIG_MTD_SC520CDP is not set
-# CONFIG_MTD_SBC_MEDIAGX is not set
-# CONFIG_MTD_ELAN_104NC is not set
-# CONFIG_MTD_SA1100 is not set
-# CONFIG_MTD_DC21285 is not set
-# CONFIG_MTD_CSTM_CFI_JEDEC is not set
-# CONFIG_MTD_JEDEC is not set
-# CONFIG_MTD_MIXMEM is not set
-# CONFIG_MTD_OCTAGON is not set
-# CONFIG_MTD_VMAX is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_SPIA is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play configuration
-#
-# CONFIG_PNP is not set
-# CONFIG_ISAPNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_FILTER is not set
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
-# CONFIG_ATM is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-# CONFIG_BLK_DEV_IDE is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_IDEDISK is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Network device support
-#
+CONFIG_ETRAX_AXISFLASHMAP=y
 CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL is not set
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_UNIX98_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_JOYSTICK is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_CRAMFS=y
-CONFIG_RAMFS=y
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JOLIET is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYSV_FS_WRITE is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_V3 is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_LOCKD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_MOUNT_SUBDIR is not set
-# CONFIG_NCPFS_NDS_DOMAINS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PROFILE is not set
diff --git a/arch/cris/configs/etrax-100lx_v2_defconfig b/arch/cris/configs/etrax-100lx_v2_defconfig
index 59f36a58f842..1b2853e39801 100644
--- a/arch/cris/configs/etrax-100lx_v2_defconfig
+++ b/arch/cris/configs/etrax-100lx_v2_defconfig
@@ -1,580 +1,43 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Mon Dec  3 11:34:27 2007
-#
-CONFIG_MMU=y
-CONFIG_ZONE_DMA=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NO_IOPORT=y
-CONFIG_FORCE_MAX_ZONEORDER=6
-CONFIG_CRIS=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_GENERIC_HARDIRQS=y
 CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc"
-# CONFIG_ETRAX_WATCHDOG is not set
 CONFIG_ETRAX_FAST_TIMER=y
-# CONFIG_ETRAX_KMALLOCED_MODULES is not set
-# CONFIG_OOM_REBOOT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-
-#
-# Hardware setup
-#
-# CONFIG_ETRAX100LX is not set
 CONFIG_ETRAX100LX_V2=y
-# CONFIG_SVINTO_SIM is not set
-# CONFIG_ETRAXFS is not set
-# CONFIG_CRIS_MACH_ARTPEC3 is not set
-# CONFIG_ETRAX_VCS_SIM is not set
-CONFIG_ETRAX_ARCH_V10=y
-# CONFIG_ETRAX_ARCH_V32 is not set
 CONFIG_ETRAX_DRAM_SIZE=32
-CONFIG_ETRAX_FLASH_BUSWIDTH=2
-CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1
 CONFIG_ETRAX_FLASH1_SIZE=4
-# CONFIG_ETRAX_DEBUG_PORT0 is not set
-# CONFIG_ETRAX_DEBUG_PORT1 is not set
-# CONFIG_ETRAX_DEBUG_PORT2 is not set
-# CONFIG_ETRAX_DEBUG_PORT3 is not set
 CONFIG_ETRAX_DEBUG_PORT_NULL=y
-
-#
-# CRIS v10 options
-#
-CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
-CONFIG_ETRAX_PA_LEDS=y
-# CONFIG_ETRAX_PB_LEDS is not set
-# CONFIG_ETRAX_CSP0_LEDS is not set
-# CONFIG_ETRAX_NO_LEDS is not set
-CONFIG_ETRAX_LED1G=2
-CONFIG_ETRAX_LED1R=3
-CONFIG_ETRAX_LED2G=4
-CONFIG_ETRAX_LED2R=5
-CONFIG_ETRAX_LED3G=2
-CONFIG_ETRAX_LED3R=2
-CONFIG_ETRAX_RESCUE_SER0=y
-# CONFIG_ETRAX_RESCUE_SER1 is not set
-# CONFIG_ETRAX_RESCUE_SER2 is not set
-# CONFIG_ETRAX_RESCUE_SER3 is not set
-CONFIG_ETRAX_DEF_R_WAITSTATES=95a6
-CONFIG_ETRAX_DEF_R_BUS_CONFIG=104
-# CONFIG_ETRAX_SDRAM is not set
-CONFIG_ETRAX_DEF_R_DRAM_CONFIG=1a200040
-CONFIG_ETRAX_DEF_R_DRAM_TIMING=5611
-CONFIG_ETRAX_DEF_R_PORT_PA_DIR=1c
-CONFIG_ETRAX_DEF_R_PORT_PA_DATA=00
-CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=00
-CONFIG_ETRAX_DEF_R_PORT_PB_DIR=00
-CONFIG_ETRAX_DEF_R_PORT_PB_DATA=ff
-# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Drivers for built-in interfaces
-#
 CONFIG_ETRAX_ETHERNET=y
 CONFIG_ETRAX_SERIAL=y
-# CONFIG_ETRAX_SERIAL_FAST_TIMER is not set
-# CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set
-CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5
-# CONFIG_ETRAX_SERIAL_PORT0 is not set
-# CONFIG_ETRAX_SERIAL_PORT1 is not set
-# CONFIG_ETRAX_SERIAL_PORT2 is not set
-# CONFIG_ETRAX_SERIAL_PORT3 is not set
-# CONFIG_ETRAX_RS485 is not set
-# CONFIG_ETRAX_IDE is not set
-# CONFIG_ETRAX_USB_HOST is not set
 CONFIG_ETRAX_AXISFLASHMAP=y
-CONFIG_ETRAX_PTABLE_SECTOR=65536
-# CONFIG_ETRAX_I2C is not set
-# CONFIG_ETRAX_GPIO is not set
-# CONFIG_ETRAX_RTC is not set
-# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
-CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
 CONFIG_MTD_MTDRAM=y
 CONFIG_MTDRAM_TOTAL_SIZE=0
 CONFIG_MTDRAM_ERASE_SIZE=64
 CONFIG_MTDRAM_ABS_POS=0x0
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PROFILING is not set
-# CONFIG_SYSTEM_PROFILER is not set
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_DMA=y
diff --git a/arch/cris/configs/etraxfs_defconfig b/arch/cris/configs/etraxfs_defconfig
index 73c646a37255..f73d38cc9c66 100644
--- a/arch/cris/configs/etraxfs_defconfig
+++ b/arch/cris/configs/etraxfs_defconfig